From a7aea373b4ca428f1be2c1fedd2f26c8e3f2864d Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Thu, 23 Apr 2009 16:17:54 -0700 Subject: fsldma: use PCI Read Multiple command By default, the Freescale 83xx DMA controller uses the PCI Read Line command when reading data over the PCI bus. Setting the controller to use the PCI Read Multiple command instead allows the controller to read much larger bursts of data, which provides a drastic speed increase. The slowdown due to using PCI Read Line was only observed when a PCI-to-PCI bridge was between the devices trying to communicate. A simple test driver showed an increase from 4MB/sec to 116MB/sec when performing DMA over the PCI bus. Using DMA to transfer between blocks of local SDRAM showed no change in performance with this patch. The dmatest driver was also used to verify the correctness of the transfers, and showed no errors. Signed-off-by: Ira W. Snyder Acked-by: Timur Tabi Acked-by: Kumar Gala Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 10 ++++++++-- drivers/dma/fsldma.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index f18d1bde043..a1cb25e277b 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -12,6 +12,11 @@ * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. * The support for MPC8349 DMA contorller is also added. * + * This driver instructs the DMA controller to issue the PCI Read Multiple + * command for PCI read operations, instead of using the default PCI Read Line + * command. Please be aware that this setting may result in read pre-fetching + * on some platforms. + * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan) case FSL_DMA_IP_83XX: /* Set the channel to below modes: * EOTIE - End-of-transfer interrupt enable + * PRC_RM - PCI read multiple */ - DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE, - 32); + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE + | FSL_DMA_MR_PRC_RM, 32); break; } diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index 4f21a512d84..dc7f2686579 100644 --- a/drivers/dma/fsldma.h +++ b/drivers/dma/fsldma.h @@ -38,6 +38,7 @@ /* Special MR definition for MPC8349 */ #define FSL_DMA_MR_EOTIE 0x00000080 +#define FSL_DMA_MR_PRC_RM 0x00000800 #define FSL_DMA_SR_CH 0x00000020 #define FSL_DMA_SR_PE 0x00000010 -- cgit v1.2.3 From be30b226f2ae618cd719e40267d9923db1db9001 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Thu, 28 May 2009 09:20:42 +0000 Subject: fsldma: enable external start for the 83xx controller The 83xx controller has external start capability, but lacks external pause capability. Hook up the external start function pointer for the 83xx controller. Signed-off-by: Ira W. Snyder Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index a1cb25e277b..10bcf0cb0ef 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -877,9 +877,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) { case FSL_DMA_IP_85XX: - new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start; new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause; case FSL_DMA_IP_83XX: + new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start; new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size; new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size; } -- cgit v1.2.3 From 43a1a3ed6bf5a1b9ae197b4f5f20033baf19db61 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Thu, 28 May 2009 09:26:40 +0000 Subject: fsldma: do not clear bandwidth control bits on the 83xx controller The 83xx controller does not support the external pause feature. The bit in the mode register that controls external pause on the 85xx controller happens to be part of the bandwidth control settings for the 83xx controller. This patch fixes the driver so that it only clears the external pause bit if the hardware is the 85xx controller. When driving the 83xx controller, the bit is left untouched. This follows the existing convention that mode registers settings are not touched unless necessary. Signed-off-by: Ira W. Snyder Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 10bcf0cb0ef..6e60c77a145 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -147,10 +147,11 @@ static void dma_start(struct fsl_dma_chan *fsl_chan) if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) { DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32); mr_set |= FSL_DMA_MR_EMP_EN; - } else + } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~FSL_DMA_MR_EMP_EN, 32); + } if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT) mr_set |= FSL_DMA_MR_EMS_EN; -- cgit v1.2.3 From aa93d632c496184e5b779dbcf961bf1c6ececf0b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 5 May 2009 09:52:46 -0700 Subject: drm/i915: Require digital monitor on HDMI ports for detect HDMI and DVI both require DDC/EDID on monitors, so use that to know when a monitor is connected as the hot-plug pins are shared with SDVO and DisplayPort Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_hdmi.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 4ea2a651b92..2495359ea8d 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -31,6 +31,7 @@ #include "drmP.h" #include "drm.h" #include "drm_crtc.h" +#include "drm_edid.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" @@ -129,20 +130,26 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder, return true; } -static void -intel_hdmi_sink_detect(struct drm_connector *connector) +static enum drm_connector_status +intel_hdmi_edid_detect(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; struct edid *edid = NULL; + enum drm_connector_status status = connector_status_disconnected; edid = drm_get_edid(&intel_output->base, &intel_output->ddc_bus->adapter); - if (edid != NULL) { - hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid); - kfree(edid); + hdmi_priv->has_hdmi_sink = false; + if (edid) { + if (edid->digital) { + status = connector_status_connected; + hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid); + } intel_output->base.display_info.raw_edid = NULL; + kfree(edid); } + return status; } static enum drm_connector_status @@ -154,11 +161,7 @@ igdng_hdmi_detect(struct drm_connector *connector) /* FIXME hotplug detect */ hdmi_priv->has_hdmi_sink = false; - intel_hdmi_sink_detect(connector); - if (hdmi_priv->has_hdmi_sink) - return connector_status_connected; - else - return connector_status_disconnected; + return intel_hdmi_edid_detect(connector); } static enum drm_connector_status @@ -201,10 +204,9 @@ intel_hdmi_detect(struct drm_connector *connector) return connector_status_unknown; } - if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) { - intel_hdmi_sink_detect(connector); - return connector_status_connected; - } else + if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) + return intel_hdmi_edid_detect(connector); + else return connector_status_disconnected; } -- cgit v1.2.3 From 98acd46f356e560c371c0e416d92e8e56be31804 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 14 Jun 2009 12:31:58 -0700 Subject: drm/i915: Apple DMI info has inconsistent SYS_VENDOR information Some machines say 'Apple Inc.' while others say 'Apple Computer, Inc'. Switch the test to just look for 'Apple' instead. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f073ed8432e..345e5055f1c 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -456,7 +456,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core series)", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), }, }, @@ -464,7 +464,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core 2 series)", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), }, }, -- cgit v1.2.3 From b99e228d354cc1e7f19fb8b5f1297d493e309186 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 10 Jun 2009 19:08:16 -0700 Subject: drm/i915: check for CONFIG_PNP before using pnp function Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem_tiling.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 5c1ceec49f5..daeae62e1c2 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -114,11 +114,13 @@ intel_alloc_mchbar_resource(struct drm_device *dev) mchbar_addr = ((u64)temp_hi << 32) | temp_lo; /* If ACPI doesn't have it, assume we need to allocate it ourselves */ +#ifdef CONFIG_PNP if (mchbar_addr && pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) { ret = 0; goto out_put; } +#endif /* Get some space for it */ ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res, -- cgit v1.2.3 From f9c10a9b96a31b4a82a4fa807400c04f00284068 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 12:16:25 -0700 Subject: drm/i915: Change I2C api to pass around i2c_adapters The existing API passed around intel_i2c_chan pointers, which are dependent on the i2c bit-banging algo. This precluded the driver from using outputs which use a different algo. Switching to the more general i2c_adpater allows the driver to support non bit-banging DDC. This also required moving the slave address into the output private structures. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/dvo.h | 4 +-- drivers/gpu/drm/i915/dvo_ch7017.c | 20 ++++++++------- drivers/gpu/drm/i915/dvo_ch7xxx.c | 25 +++++++++--------- drivers/gpu/drm/i915/dvo_ivch.c | 21 +++++++-------- drivers/gpu/drm/i915/dvo_sil164.c | 25 +++++++++--------- drivers/gpu/drm/i915/dvo_tfp410.c | 25 +++++++++--------- drivers/gpu/drm/i915/intel_drv.h | 11 ++++---- drivers/gpu/drm/i915/intel_dvo.c | 16 +++++------- drivers/gpu/drm/i915/intel_hdmi.c | 2 +- drivers/gpu/drm/i915/intel_i2c.c | 16 ++++++++---- drivers/gpu/drm/i915/intel_modes.c | 14 +++++----- drivers/gpu/drm/i915/intel_sdvo.c | 52 +++++++++++++++++++------------------- 12 files changed, 118 insertions(+), 113 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h index e747ac42fe3..288fc50627e 100644 --- a/drivers/gpu/drm/i915/dvo.h +++ b/drivers/gpu/drm/i915/dvo.h @@ -37,7 +37,7 @@ struct intel_dvo_device { /* GPIO register used for i2c bus to control this device */ u32 gpio; int slave_addr; - struct intel_i2c_chan *i2c_bus; + struct i2c_adapter *i2c_bus; const struct intel_dvo_dev_ops *dev_ops; void *dev_priv; @@ -52,7 +52,7 @@ struct intel_dvo_dev_ops { * Returns NULL if the device does not exist. */ bool (*init)(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus); + struct i2c_adapter *i2cbus); /* * Called to allow the output a chance to create properties after the diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c index 03d4b4973b0..621815b531d 100644 --- a/drivers/gpu/drm/i915/dvo_ch7017.c +++ b/drivers/gpu/drm/i915/dvo_ch7017.c @@ -176,19 +176,20 @@ static void ch7017_dpms(struct intel_dvo_device *dvo, int mode); static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) { - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -208,10 +209,11 @@ static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) { - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -228,8 +230,9 @@ static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) /** Probes for a CH7017 on the given bus and slave address. */ static bool ch7017_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); struct ch7017_priv *priv; uint8_t val; @@ -237,8 +240,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo, if (priv == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = priv; if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val)) @@ -248,7 +250,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo, val != CH7018_DEVICE_ID_VALUE && val != CH7019_DEVICE_ID_VALUE) { DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n", - val, i2cbus->adapter.name,i2cbus->slave_addr); + val, i2cbus->adapter.name,dvo->slave_addr); goto fail; } diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c index d2fd95dbd03..a9b89628968 100644 --- a/drivers/gpu/drm/i915/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -123,19 +123,20 @@ static char *ch7xxx_get_id(uint8_t vid) static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct ch7xxx_priv *ch7xxx= dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -152,7 +153,7 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!ch7xxx->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -161,10 +162,11 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct ch7xxx_priv *ch7xxx = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -178,14 +180,14 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!ch7xxx->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } static bool ch7xxx_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the CH7xxx chip on the specified i2c bus */ struct ch7xxx_priv *ch7xxx; @@ -196,8 +198,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, if (ch7xxx == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = ch7xxx; ch7xxx->quiet = true; @@ -207,7 +208,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, name = ch7xxx_get_id(vendor); if (!name) { DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", - vendor, i2cbus->adapter.name, i2cbus->slave_addr); + vendor, adapter->name, dvo->slave_addr); goto out; } @@ -217,7 +218,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, if (device != CH7xxx_DID) { DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", - vendor, i2cbus->adapter.name, i2cbus->slave_addr); + vendor, adapter->name, dvo->slave_addr); goto out; } diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c index 0c8d375e8e3..aa176f9921f 100644 --- a/drivers/gpu/drm/i915/dvo_ivch.c +++ b/drivers/gpu/drm/i915/dvo_ivch.c @@ -169,13 +169,14 @@ static void ivch_dump_regs(struct intel_dvo_device *dvo); static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) { struct ivch_priv *priv = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[1]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 0, }, @@ -186,7 +187,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD | I2C_M_NOSTART, .len = 2, .buf = in_buf, @@ -202,7 +203,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) if (!priv->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -211,10 +212,11 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) { struct ivch_priv *priv = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[3]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 3, .buf = out_buf, @@ -229,7 +231,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) if (!priv->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -237,7 +239,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) /** Probes the given bus and slave address for an ivch */ static bool ivch_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { struct ivch_priv *priv; uint16_t temp; @@ -246,8 +248,7 @@ static bool ivch_init(struct intel_dvo_device *dvo, if (priv == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = priv; priv->quiet = true; diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c index 033a4bb070b..e1c1f7341e5 100644 --- a/drivers/gpu/drm/i915/dvo_sil164.c +++ b/drivers/gpu/drm/i915/dvo_sil164.c @@ -76,19 +76,20 @@ struct sil164_priv { static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct sil164_priv *sil = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -105,7 +106,7 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!sil->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -113,10 +114,11 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct sil164_priv *sil= dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -130,7 +132,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!sil->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -138,7 +140,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) /* Silicon Image 164 driver for chip on i2c bus */ static bool sil164_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the SIL164 chip on the specified i2c bus */ struct sil164_priv *sil; @@ -148,8 +150,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (sil == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = sil; sil->quiet = true; @@ -158,7 +159,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (ch != (SIL164_VID & 0xff)) { DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", - ch, i2cbus->adapter.name, i2cbus->slave_addr); + ch, adapter->name, dvo->slave_addr); goto out; } @@ -167,7 +168,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (ch != (SIL164_DID & 0xff)) { DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", - ch, i2cbus->adapter.name, i2cbus->slave_addr); + ch, adapter->name, dvo->slave_addr); goto out; } sil->quiet = false; diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c index 207fda806eb..9ecc907384e 100644 --- a/drivers/gpu/drm/i915/dvo_tfp410.c +++ b/drivers/gpu/drm/i915/dvo_tfp410.c @@ -101,19 +101,20 @@ struct tfp410_priv { static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct tfp410_priv *tfp = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -130,7 +131,7 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!tfp->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -138,10 +139,11 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct tfp410_priv *tfp = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -155,7 +157,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!tfp->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -174,7 +176,7 @@ static int tfp410_getid(struct intel_dvo_device *dvo, int addr) /* Ti TFP410 driver for chip on i2c bus */ static bool tfp410_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the tfp410 chip on the specified i2c bus */ struct tfp410_priv *tfp; @@ -184,20 +186,19 @@ static bool tfp410_init(struct intel_dvo_device *dvo, if (tfp == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = tfp; tfp->quiet = true; if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) { DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n", - id, i2cbus->adapter.name, i2cbus->slave_addr); + id, adapter->name, dvo->slave_addr); goto out; } if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) { DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n", - id, i2cbus->adapter.name, i2cbus->slave_addr); + id, adapter->name, dvo->slave_addr); goto out; } tfp->quiet = false; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cd4b9c5f715..d89a2fed35a 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -65,7 +65,6 @@ struct intel_i2c_chan { u32 reg; /* GPIO reg */ struct i2c_adapter adapter; struct i2c_algo_bit_data algo; - u8 slave_addr; }; struct intel_framebuffer { @@ -79,8 +78,8 @@ struct intel_output { struct drm_encoder enc; int type; - struct intel_i2c_chan *i2c_bus; /* for control functions */ - struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ + struct i2c_adapter *i2c_bus; + struct i2c_adapter *ddc_bus; bool load_detect_temp; bool needs_tv_clock; void *dev_priv; @@ -104,9 +103,9 @@ struct intel_crtc { #define enc_to_intel_output(x) container_of(x, struct intel_output, enc) #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base) -struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, - const char *name); -void intel_i2c_destroy(struct intel_i2c_chan *chan); +struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name); +void intel_i2c_destroy(struct i2c_adapter *adapter); int intel_ddc_get_modes(struct intel_output *intel_output); extern bool intel_ddc_probe(struct intel_output *intel_output); void intel_i2c_quirk_set(struct drm_device *dev, bool enable); diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 1ee3007d6ec..13bff20930e 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -384,10 +384,9 @@ void intel_dvo_init(struct drm_device *dev) { struct intel_output *intel_output; struct intel_dvo_device *dvo; - struct intel_i2c_chan *i2cbus = NULL; + struct i2c_adapter *i2cbus = NULL; int ret = 0; int i; - int gpio_inited = 0; int encoder_type = DRM_MODE_ENCODER_NONE; intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) @@ -420,14 +419,11 @@ void intel_dvo_init(struct drm_device *dev) * It appears that everything is on GPIOE except for panels * on i830 laptops, which are on GPIOB (DVOA). */ - if (gpio_inited != gpio) { - if (i2cbus != NULL) - intel_i2c_destroy(i2cbus); - if (!(i2cbus = intel_i2c_create(dev, gpio, - gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { - continue; - } - gpio_inited = gpio; + if (i2cbus != NULL) + intel_i2c_destroy(i2cbus); + if (!(i2cbus = intel_i2c_create(dev, gpio, + gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { + continue; } if (dvo->dev_ops!= NULL) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 2495359ea8d..fbe96005fa1 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -139,7 +139,7 @@ intel_hdmi_edid_detect(struct drm_connector *connector) enum drm_connector_status status = connector_status_disconnected; edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); + intel_output->ddc_bus); hdmi_priv->has_hdmi_sink = false; if (edid) { if (edid->digital) { diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index f7061f68d05..62b8bead765 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -124,6 +124,7 @@ static void set_data(void *data, int state_high) * @output: driver specific output device * @reg: GPIO reg to use * @name: name for this bus + * @slave_addr: slave address (if fixed) * * Creates and registers a new i2c bus with the Linux i2c layer, for use * in output probing and control (e.g. DDC or SDVO control functions). @@ -139,8 +140,8 @@ static void set_data(void *data, int state_high) * %GPIOH * see PRM for details on how these different busses are used. */ -struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, - const char *name) +struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name) { struct intel_i2c_chan *chan; @@ -174,7 +175,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, intel_i2c_quirk_set(dev, false); udelay(20); - return chan; + return &chan->adapter; out_free: kfree(chan); @@ -187,11 +188,16 @@ out_free: * * Unregister the adapter from the i2c layer, then free the structure. */ -void intel_i2c_destroy(struct intel_i2c_chan *chan) +void intel_i2c_destroy(struct i2c_adapter *adapter) { - if (!chan) + struct intel_i2c_chan *chan; + + if (!adapter) return; + chan = container_of(adapter, + struct intel_i2c_chan, + adapter); i2c_del_adapter(&chan->adapter); kfree(chan); } diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index e0910fefce8..67e2f4632a2 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -53,10 +53,9 @@ bool intel_ddc_probe(struct intel_output *intel_output) } }; - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); - ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); - + intel_i2c_quirk_set(intel_output->base.dev, true); + ret = i2c_transfer(intel_output->ddc_bus, msgs, 2); + intel_i2c_quirk_set(intel_output->base.dev, false); if (ret == 2) return true; @@ -74,10 +73,9 @@ int intel_ddc_get_modes(struct intel_output *intel_output) struct edid *edid; int ret = 0; - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); - edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); + intel_i2c_quirk_set(intel_output->base.dev, true); + edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus); + intel_i2c_quirk_set(intel_output->base.dev, false); if (edid) { drm_mode_connector_update_edid_property(&intel_output->base, edid); diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 9a00adb3a50..13c39c827eb 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -38,8 +38,8 @@ #undef SDVO_DEBUG #define I915_SDVO "i915_sdvo" struct intel_sdvo_priv { - struct intel_i2c_chan *i2c_bus; - int slaveaddr; + struct i2c_adapter *i2c_bus; + u8 slave_addr; /* Register for the SDVO device: SDVOB or SDVOC */ int output_device; @@ -146,13 +146,13 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, struct i2c_msg msgs[] = { { - .addr = sdvo_priv->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = sdvo_priv->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = I2C_M_RD, .len = 1, .buf = buf, @@ -162,7 +162,7 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, out_buf[0] = addr; out_buf[1] = 0; - if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2) + if ((ret = i2c_transfer(sdvo_priv->i2c_bus, msgs, 2)) == 2) { *ch = buf[0]; return true; @@ -175,10 +175,11 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, u8 ch) { + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; u8 out_buf[2]; struct i2c_msg msgs[] = { { - .addr = intel_output->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = 0, .len = 2, .buf = out_buf, @@ -188,7 +189,7 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, out_buf[0] = addr; out_buf[1] = ch; - if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1) + if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1) { return true; } @@ -1371,7 +1372,7 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); + intel_output->ddc_bus); if (edid != NULL) { sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid); kfree(edid); @@ -1709,7 +1710,7 @@ intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (to_intel_output(connector)->ddc_bus == chan) { + if (to_intel_output(connector)->ddc_bus == &chan->adapter) { intel_output = to_intel_output(connector); break; } @@ -1723,7 +1724,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; struct i2c_algo_bit_data *algo_data; - struct i2c_algorithm *algo; + const struct i2c_algorithm *algo; algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data; intel_output = @@ -1733,7 +1734,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, return -EINVAL; sdvo_priv = intel_output->dev_priv; - algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo; + algo = intel_output->i2c_bus->algo; intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); return algo->master_xfer(i2c_adap, msgs, num); @@ -1785,12 +1786,13 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; - struct intel_i2c_chan *i2cbus = NULL; - struct intel_i2c_chan *ddcbus = NULL; + struct i2c_adapter *i2cbus = NULL; + struct i2c_adapter *ddcbus = NULL; + int connector_type; u8 ch[0x40]; int i; - int encoder_type, output_id; + int encoder_type; u8 slave_addr; intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); @@ -1802,25 +1804,23 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_output->type = INTEL_OUTPUT_SDVO; /* setup the DDC bus. */ - if (output_device == SDVOB) + if (output_device == SDVOB) { i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); - else + slave_addr = 0x38; + } else { i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); - + slave_addr = 0x39; + } + if (!i2cbus) goto err_inteloutput; slave_addr = intel_sdvo_get_slave_addr(dev, output_device); sdvo_priv->i2c_bus = i2cbus; + sdvo_priv->slave_addr = slave_addr; - if (output_device == SDVOB) { - output_id = 1; - } else { - output_id = 2; - } - sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1; sdvo_priv->output_device = output_device; - intel_output->i2c_bus = i2cbus; + intel_output->i2c_bus = sdvo_priv->i2c_bus; intel_output->dev_priv = sdvo_priv; /* Read the regs to test if we can talk to the device */ @@ -1843,8 +1843,8 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) goto err_i2c; intel_sdvo_i2c_bit_algo.functionality = - intel_output->i2c_bus->adapter.algo->functionality; - ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo; + intel_output->i2c_bus->algo->functionality; + ddcbus->algo = &intel_sdvo_i2c_bit_algo; intel_output->ddc_bus = ddcbus; /* In defaut case sdvo lvds is false */ -- cgit v1.2.3 From 308cd3a2e505b0d15f2852e8db5d648b60a6313b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 14 Jun 2009 11:56:18 -0700 Subject: drm/i915: Clean up SDVO i2c handling Eliminate the copy of i2c_bus in sdvo_priv. Eliminate local copies of i2c_bus and ddcbus. Eliminate unused settings of slave_addr. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_sdvo.c | 54 +++++++++++++++------------------------ 1 file changed, 21 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 13c39c827eb..f03473779fe 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -38,7 +38,6 @@ #undef SDVO_DEBUG #define I915_SDVO "i915_sdvo" struct intel_sdvo_priv { - struct i2c_adapter *i2c_bus; u8 slave_addr; /* Register for the SDVO device: SDVOB or SDVOC */ @@ -162,7 +161,7 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, out_buf[0] = addr; out_buf[1] = 0; - if ((ret = i2c_transfer(sdvo_priv->i2c_bus, msgs, 2)) == 2) + if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2) { *ch = buf[0]; return true; @@ -1370,7 +1369,6 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; struct edid *edid = NULL; - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus); if (edid != NULL) { @@ -1550,7 +1548,6 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector) static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; struct drm_i915_private *dev_priv = connector->dev->dev_private; /* @@ -1558,8 +1555,6 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) * Assume that the preferred modes are * arranged in priority order. */ - /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); if (list_empty(&connector->probed_modes) == false) return; @@ -1786,14 +1781,11 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; - struct i2c_adapter *i2cbus = NULL; - struct i2c_adapter *ddcbus = NULL; int connector_type; u8 ch[0x40]; int i; int encoder_type; - u8 slave_addr; intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); if (!intel_output) { @@ -1801,27 +1793,24 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); + sdvo_priv->output_device = output_device; + + intel_output->dev_priv = sdvo_priv; intel_output->type = INTEL_OUTPUT_SDVO; /* setup the DDC bus. */ - if (output_device == SDVOB) { - i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); - slave_addr = 0x38; - } else { - i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); - slave_addr = 0x39; - } - - if (!i2cbus) + if (output_device == SDVOB) + intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); + else + intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); + + if (!intel_output->i2c_bus) goto err_inteloutput; - slave_addr = intel_sdvo_get_slave_addr(dev, output_device); - sdvo_priv->i2c_bus = i2cbus; - sdvo_priv->slave_addr = slave_addr; + sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device); - sdvo_priv->output_device = output_device; - intel_output->i2c_bus = sdvo_priv->i2c_bus; - intel_output->dev_priv = sdvo_priv; + /* Save the bit-banging i2c functionality for use by the DDC wrapper */ + intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality; /* Read the regs to test if we can talk to the device */ for (i = 0; i < 0x40; i++) { @@ -1835,17 +1824,15 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) /* setup the DDC bus. */ if (output_device == SDVOB) - ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); + intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); else - ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); + intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); - if (ddcbus == NULL) + if (intel_output->ddc_bus == NULL) goto err_i2c; - intel_sdvo_i2c_bit_algo.functionality = - intel_output->i2c_bus->algo->functionality; - ddcbus->algo = &intel_sdvo_i2c_bit_algo; - intel_output->ddc_bus = ddcbus; + /* Wrap with our custom algo which switches to DDC mode */ + intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo; /* In defaut case sdvo lvds is false */ sdvo_priv->is_lvds = false; @@ -1965,9 +1952,10 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) return true; err_i2c: - if (ddcbus != NULL) + if (intel_output->ddc_bus != NULL) intel_i2c_destroy(intel_output->ddc_bus); - intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->i2c_bus != NULL) + intel_i2c_destroy(intel_output->i2c_bus); err_inteloutput: kfree(intel_output); -- cgit v1.2.3 From c31c4ba3437d98efa19710e30d694a1cfdf87aa5 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 6 May 2009 11:48:58 -0700 Subject: drm/i915: add per-output hotplug callback for KMS This allows each output to deal with plug/unplug events as needed. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_irq.c | 12 +++++++++++- drivers/gpu/drm/i915/intel_drv.h | 1 + 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b86b7b7130c..228546f6eaa 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -232,7 +232,17 @@ static void i915_hotplug_work_func(struct work_struct *work) drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, hotplug_work); struct drm_device *dev = dev_priv->dev; - + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + + if (mode_config->num_connector) { + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->hot_plug) + (*intel_output->hot_plug) (intel_output); + } + } /* Just fire off a uevent and let userspace tell us what to do */ drm_sysfs_hotplug_event(dev); } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index d89a2fed35a..c5858792c80 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -83,6 +83,7 @@ struct intel_output { bool load_detect_temp; bool needs_tv_clock; void *dev_priv; + void (*hot_plug)(struct intel_output *); }; struct intel_crtc { -- cgit v1.2.3 From a4fc5ed69817c73e32571ad7837bb707f9890009 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 7 Apr 2009 16:16:42 -0700 Subject: drm/i915: Add Display Port support Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/Makefile | 2 + drivers/gpu/drm/i915/i915_drv.h | 12 + drivers/gpu/drm/i915/i915_suspend.c | 34 +- drivers/gpu/drm/i915/intel_display.c | 107 +++- drivers/gpu/drm/i915/intel_dp.c | 1098 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_dp.h | 144 +++++ drivers/gpu/drm/i915/intel_dp_i2c.c | 272 +++++++++ drivers/gpu/drm/i915/intel_drv.h | 5 + 8 files changed, 1668 insertions(+), 6 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dp.c create mode 100644 drivers/gpu/drm/i915/intel_dp.h create mode 100644 drivers/gpu/drm/i915/intel_dp_i2c.c (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 51c5a050aa7..30d6b99fb30 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -13,6 +13,8 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ intel_crt.o \ intel_lvds.o \ intel_bios.o \ + intel_dp.o \ + intel_dp_i2c.o \ intel_hdmi.o \ intel_sdvo.o \ intel_modes.o \ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7a84f04e843..bb4c2d387b6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -306,6 +306,17 @@ typedef struct drm_i915_private { u32 saveCURBPOS; u32 saveCURBBASE; u32 saveCURSIZE; + u32 saveDP_B; + u32 saveDP_C; + u32 saveDP_D; + u32 savePIPEA_GMCH_DATA_M; + u32 savePIPEB_GMCH_DATA_M; + u32 savePIPEA_GMCH_DATA_N; + u32 savePIPEB_GMCH_DATA_N; + u32 savePIPEA_DP_LINK_M; + u32 savePIPEB_DP_LINK_M; + u32 savePIPEA_DP_LINK_N; + u32 savePIPEB_DP_LINK_N; struct { struct drm_mm gtt_space; @@ -857,6 +868,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \ IS_I915GM(dev))) #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev)) +#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index a98e2831ed3..8d8e083d14a 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -322,6 +322,20 @@ int i915_save_state(struct drm_device *dev) dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + dev_priv->saveDP_B = I915_READ(DP_B); + dev_priv->saveDP_C = I915_READ(DP_C); + dev_priv->saveDP_D = I915_READ(DP_D); + dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M); + dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M); + dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N); + dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N); + dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M); + dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M); + dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N); + dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N); + } /* FIXME: save TV & SDVO state */ /* FBC state */ @@ -404,7 +418,19 @@ int i915_restore_state(struct drm_device *dev) for (i = 0; i < 8; i++) I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]); } - + + /* Display port ratios (must be done before clock is set) */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M); + I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M); + I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N); + I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N); + I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M); + I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M); + I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N); + I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { @@ -518,6 +544,12 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(DP_B, dev_priv->saveDP_B); + I915_WRITE(DP_C, dev_priv->saveDP_C); + I915_WRITE(DP_D, dev_priv->saveDP_D); + } /* FIXME: restore TV & SDVO state */ /* FBC info */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3e1c7816211..5af55aa0d7a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -29,6 +29,7 @@ #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" +#include "intel_dp.h" #include "drm_crtc_helper.h" @@ -135,10 +136,11 @@ struct intel_limit { #define INTEL_LIMIT_G4X_HDMI_DAC 5 #define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6 #define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7 -#define INTEL_LIMIT_IGD_SDVO_DAC 8 -#define INTEL_LIMIT_IGD_LVDS 9 -#define INTEL_LIMIT_IGDNG_SDVO_DAC 10 -#define INTEL_LIMIT_IGDNG_LVDS 11 +#define INTEL_LIMIT_G4X_DISPLAY_PORT 8 +#define INTEL_LIMIT_IGD_SDVO_DAC 9 +#define INTEL_LIMIT_IGD_LVDS 10 +#define INTEL_LIMIT_IGDNG_SDVO_DAC 11 +#define INTEL_LIMIT_IGDNG_LVDS 12 /*The parameter is for SDVO on G4x platform*/ #define G4X_DOT_SDVO_MIN 25000 @@ -218,6 +220,25 @@ struct intel_limit { #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0 +/*The parameter is for DISPLAY PORT on G4x platform*/ +#define G4X_DOT_DISPLAY_PORT_MIN 161670 +#define G4X_DOT_DISPLAY_PORT_MAX 227000 +#define G4X_N_DISPLAY_PORT_MIN 1 +#define G4X_N_DISPLAY_PORT_MAX 2 +#define G4X_M_DISPLAY_PORT_MIN 97 +#define G4X_M_DISPLAY_PORT_MAX 108 +#define G4X_M1_DISPLAY_PORT_MIN 0x10 +#define G4X_M1_DISPLAY_PORT_MAX 0x12 +#define G4X_M2_DISPLAY_PORT_MIN 0x05 +#define G4X_M2_DISPLAY_PORT_MAX 0x06 +#define G4X_P_DISPLAY_PORT_MIN 10 +#define G4X_P_DISPLAY_PORT_MAX 20 +#define G4X_P1_DISPLAY_PORT_MIN 1 +#define G4X_P1_DISPLAY_PORT_MAX 2 +#define G4X_P2_DISPLAY_PORT_SLOW 10 +#define G4X_P2_DISPLAY_PORT_FAST 10 +#define G4X_P2_DISPLAY_PORT_LIMIT 0 + /* IGDNG */ /* as we calculate clock using (register_value + 2) for N/M1/M2, so here the range value for them is (actual_value-2). @@ -256,6 +277,10 @@ static bool intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); +static bool +intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock); + static const intel_limit_t intel_limits[] = { { /* INTEL_LIMIT_I8XX_DVO_DAC */ .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, @@ -389,6 +414,28 @@ static const intel_limit_t intel_limits[] = { }, .find_pll = intel_g4x_find_best_PLL, }, + { /* INTEL_LIMIT_G4X_DISPLAY_PORT */ + .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN, + .max = G4X_DOT_DISPLAY_PORT_MAX }, + .vco = { .min = G4X_VCO_MIN, + .max = G4X_VCO_MAX}, + .n = { .min = G4X_N_DISPLAY_PORT_MIN, + .max = G4X_N_DISPLAY_PORT_MAX }, + .m = { .min = G4X_M_DISPLAY_PORT_MIN, + .max = G4X_M_DISPLAY_PORT_MAX }, + .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN, + .max = G4X_M1_DISPLAY_PORT_MAX }, + .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN, + .max = G4X_M2_DISPLAY_PORT_MAX }, + .p = { .min = G4X_P_DISPLAY_PORT_MIN, + .max = G4X_P_DISPLAY_PORT_MAX }, + .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN, + .max = G4X_P1_DISPLAY_PORT_MAX}, + .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT, + .p2_slow = G4X_P2_DISPLAY_PORT_SLOW, + .p2_fast = G4X_P2_DISPLAY_PORT_FAST }, + .find_pll = intel_find_pll_g4x_dp, + }, { /* INTEL_LIMIT_IGD_SDVO */ .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, @@ -478,6 +525,8 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC]; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { limit = &intel_limits[INTEL_LIMIT_G4X_SDVO]; + } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) { + limit = &intel_limits[INTEL_LIMIT_G4X_DISPLAY_PORT]; } else /* The option is for other outputs */ limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; @@ -764,6 +813,35 @@ out: return found; } +/* DisplayPort has only two frequencies, 162MHz and 270MHz */ +static bool +intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock) +{ + intel_clock_t clock; + if (target < 200000) { + clock.dot = 161670; + clock.p = 20; + clock.p1 = 2; + clock.p2 = 10; + clock.n = 0x01; + clock.m = 97; + clock.m1 = 0x10; + clock.m2 = 0x05; + } else { + clock.dot = 270000; + clock.p = 10; + clock.p1 = 1; + clock.p2 = 10; + clock.n = 0x02; + clock.m = 108; + clock.m1 = 0x12; + clock.m2 = 0x06; + } + memcpy(best_clock, &clock, sizeof(intel_clock_t)); + return true; +} + void intel_wait_for_vblank(struct drm_device *dev) { @@ -1541,7 +1619,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_clock_t clock; u32 dpll = 0, fp = 0, dspcntr, pipeconf; bool ok, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false; + bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; const intel_limit_t *limit; @@ -1585,6 +1663,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_ANALOG: is_crt = true; break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; } num_outputs++; @@ -1600,6 +1681,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } else { refclk = 48000; } + /* * Returns a set of divisors for the desired target clock with the given @@ -1662,6 +1744,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, else if (IS_IGDNG(dev)) dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } + if (is_dp) + dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_IGD(dev)) @@ -1809,6 +1893,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(lvds_reg, lvds); I915_READ(lvds_reg); } + if (is_dp) + intel_dp_set_m_n(crtc, mode, adjusted_mode); I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); @@ -2475,6 +2561,8 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOB); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_B); } /* Before G4X SDVOC doesn't have its own detect register */ @@ -2487,7 +2575,11 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOC); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOC); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_C); } + if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) + intel_dp_init(dev, DP_D); } else intel_dvo_init(dev); @@ -2530,6 +2622,11 @@ static void intel_setup_outputs(struct drm_device *dev) (1 << 1)); clone_mask = (1 << INTEL_OUTPUT_TVOUT); break; + case INTEL_OUTPUT_DISPLAYPORT: + crtc_mask = ((1 << 0) | + (1 << 1)); + clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT); + break; } encoder->possible_crtcs = crtc_mask; encoder->possible_clones = intel_connector_clones(dev, clone_mask); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c new file mode 100644 index 00000000000..c57cdab4f4a --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -0,0 +1,1098 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard + * + */ + +#include +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_dp.h" + +#define DP_LINK_STATUS_SIZE 6 +#define DP_LINK_CHECK_TIMEOUT (10 * 1000) + +#define DP_LINK_CONFIGURATION_SIZE 9 + +struct intel_dp_priv { + uint32_t output_reg; + uint32_t DP; + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; + uint32_t save_DP; + uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE]; + bool has_audio; + uint8_t link_bw; + uint8_t lane_count; + uint8_t dpcd[4]; + struct intel_output *intel_output; + struct i2c_adapter adapter; + struct i2c_algo_dp_aux_data algo; +}; + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]); + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP); + +static int +intel_dp_max_lane_count(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_lane_count = 4; + + if (dp_priv->dpcd[0] >= 0x11) { + max_lane_count = dp_priv->dpcd[2] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; + } + } + return max_lane_count; +} + +static int +intel_dp_max_link_bw(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_link_bw = dp_priv->dpcd[1]; + + switch (max_link_bw) { + case DP_LINK_BW_1_62: + case DP_LINK_BW_2_7: + break; + default: + max_link_bw = DP_LINK_BW_1_62; + break; + } + return max_link_bw; +} + +static int +intel_dp_link_clock(uint8_t link_bw) +{ + if (link_bw == DP_LINK_BW_2_7) + return 270000; + else + return 162000; +} + +/* I think this is a fiction */ +static int +intel_dp_link_required(int pixel_clock) +{ + return pixel_clock * 3; +} + +static int +intel_dp_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output)); + int max_lanes = intel_dp_max_lane_count(intel_output); + + if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes) + return MODE_CLOCK_HIGH; + + if (mode->clock < 10000) + return MODE_CLOCK_LOW; + + return MODE_OK; +} + +static uint32_t +pack_aux(uint8_t *src, int src_bytes) +{ + int i; + uint32_t v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((uint32_t) src[i]) << ((3-i) * 8); + return v; +} + +static void +unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +static int +intel_dp_aux_ch(struct intel_output *intel_output, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t output_reg = dp_priv->output_reg; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_data = ch_ctl + 4; + int i; + int recv_bytes; + uint32_t ctl; + uint32_t status; + + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) { + uint32_t d = pack_aux(send + i, send_bytes - i);; + + I915_WRITE(ch_data + i, d); + } + + /* The clock divider is based off the hrawclk, + * and would like to run at 2MHz. The 133 below assumes + * a 266MHz hrawclk; need to figure out how we're supposed + * to know what hrawclk is... + */ + ctl = (DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_1600us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (133 << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + + /* Send the command and wait for it to complete */ + I915_WRITE(ch_ctl, ctl); + (void) I915_READ(ch_ctl); + for (;;) { + udelay(100); + status = I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + } + + /* Clear done status and any errors */ + I915_WRITE(ch_ctl, (ctl | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)); + (void) I915_READ(ch_ctl); + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status); + return -1; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | DP_AUX_CH_CTL_RECEIVE_ERROR)) { + printk(KERN_ERR "dp_aux_ch error status 0x%08x\n", status); + return -1; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) { + uint32_t d = I915_READ(ch_data + i); + + unpack_aux(d, recv + i, recv_bytes - i); + } + + return recv_bytes; +} + +/* Write data to the aux channel in native mode */ +static int +intel_dp_aux_native_write(struct intel_output *intel_output, + uint16_t address, uint8_t *send, int send_bytes) +{ + int ret; + uint8_t msg[20]; + int msg_bytes; + uint8_t ack; + + if (send_bytes > 16) + return -1; + msg[0] = AUX_NATIVE_WRITE << 4; + msg[1] = address >> 8; + msg[2] = address; + msg[3] = send_bytes - 1; + memcpy(&msg[4], send, send_bytes); + msg_bytes = send_bytes + 4; + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1); + if (ret < 0) + return ret; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) + break; + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -1; + } + return send_bytes; +} + +/* Write a single byte to the aux channel in native mode */ +static int +intel_dp_aux_native_write_1(struct intel_output *intel_output, + uint16_t address, uint8_t byte) +{ + return intel_dp_aux_native_write(intel_output, address, &byte, 1); +} + +/* read bytes from a native aux channel */ +static int +intel_dp_aux_native_read(struct intel_output *intel_output, + uint16_t address, uint8_t *recv, int recv_bytes) +{ + uint8_t msg[4]; + int msg_bytes; + uint8_t reply[20]; + int reply_bytes; + uint8_t ack; + int ret; + + msg[0] = AUX_NATIVE_READ << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = recv_bytes - 1; + + msg_bytes = 4; + reply_bytes = recv_bytes + 1; + + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, + reply, reply_bytes); + if (ret <= 0) + return ret; + ack = reply[0]; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { + memcpy(recv, reply + 1, ret - 1); + return ret - 1; + } + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -1; + } +} + +static int +intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes) +{ + struct intel_dp_priv *dp_priv = container_of(adapter, + struct intel_dp_priv, + adapter); + struct intel_output *intel_output = dp_priv->intel_output; + + return intel_dp_aux_ch(intel_output, + send, send_bytes, recv, recv_bytes); +} + +static int +intel_dp_i2c_init(struct intel_output *intel_output, const char *name) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + DRM_ERROR("i2c_init %s\n", name); + dp_priv->algo.running = false; + dp_priv->algo.address = 0; + dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch; + + memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter)); + dp_priv->adapter.owner = THIS_MODULE; + dp_priv->adapter.class = I2C_CLASS_DDC; + strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1); + dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0'; + dp_priv->adapter.algo_data = &dp_priv->algo; + dp_priv->adapter.dev.parent = &intel_output->base.kdev; + + return i2c_dp_aux_add_bus(&dp_priv->adapter); +} + +static bool +intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int lane_count, clock; + int max_lane_count = intel_dp_max_lane_count(intel_output); + int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0; + static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; + + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = 0; clock <= max_clock; clock++) { + int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; + + if (intel_dp_link_required(mode->clock) <= link_avail) { + dp_priv->link_bw = bws[clock]; + dp_priv->lane_count = lane_count; + adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); + printk(KERN_ERR "link bw %02x lane count %d clock %d\n", + dp_priv->link_bw, dp_priv->lane_count, + adjusted_mode->clock); + return true; + } + } + } + return false; +} + +struct intel_dp_m_n { + uint32_t tu; + uint32_t gmch_m; + uint32_t gmch_n; + uint32_t link_m; + uint32_t link_n; +}; + +static void +intel_reduce_ratio(uint32_t *num, uint32_t *den) +{ + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + } +} + +static void +intel_dp_compute_m_n(int bytes_per_pixel, + int nlanes, + int pixel_clock, + int link_clock, + struct intel_dp_m_n *m_n) +{ + m_n->tu = 64; + m_n->gmch_m = pixel_clock * bytes_per_pixel; + m_n->gmch_n = link_clock * nlanes; + intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; + intel_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int lane_count = 4; + struct intel_dp_m_n m_n; + + /* + * Find the lane count in the intel_output private + */ + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) { + lane_count = dp_priv->lane_count; + break; + } + } + + /* + * Compute the GMCH and Link ratios. The '3' here is + * the number of bytes_per_pixel post-LUT, which we always + * set up for 8-bits of R/G/B, or 3 bytes total. + */ + intel_dp_compute_m_n(3, lane_count, + mode->clock, adjusted_mode->clock, &m_n); + + if (intel_crtc->pipe == 0) { + I915_WRITE(PIPEA_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEA_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n); + } else { + I915_WRITE(PIPEB_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEB_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n); + } +} + +static void +intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_crtc *crtc = intel_output->enc.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + dp_priv->DP = (DP_LINK_TRAIN_OFF | + DP_VOLTAGE_0_4 | + DP_PRE_EMPHASIS_0 | + DP_SYNC_VS_HIGH | + DP_SYNC_HS_HIGH); + + switch (dp_priv->lane_count) { + case 1: + dp_priv->DP |= DP_PORT_WIDTH_1; + break; + case 2: + dp_priv->DP |= DP_PORT_WIDTH_2; + break; + case 4: + dp_priv->DP |= DP_PORT_WIDTH_4; + break; + } + if (dp_priv->has_audio) + dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE; + + memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); + dp_priv->link_configuration[0] = dp_priv->link_bw; + dp_priv->link_configuration[1] = dp_priv->lane_count; + + /* + * Check for DPCD version > 1.1, + * enable enahanced frame stuff in that case + */ + if (dp_priv->dpcd[0] >= 0x11) { + dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + dp_priv->DP |= DP_ENHANCED_FRAMING; + } + + if (intel_crtc->pipe == 1) + dp_priv->DP |= DP_PIPEB_SELECT; +} + + +static void +intel_dp_dpms(struct drm_encoder *encoder, int mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dp_reg = I915_READ(dp_priv->output_reg); + + if (mode != DRM_MODE_DPMS_ON) { + if (dp_reg & DP_PORT_EN) + intel_dp_link_down(intel_output, dp_priv->DP); + } else { + if (!(dp_reg & DP_PORT_EN)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); + } +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +intel_dp_get_link_status(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + int ret; + + ret = intel_dp_aux_native_read(intel_output, + DP_LANE0_1_STATUS, + link_status, DP_LINK_STATUS_SIZE); + if (ret != DP_LINK_STATUS_SIZE) + return false; + return true; +} + +static uint8_t +intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int r) +{ + return link_status[r - DP_LANE0_1_STATUS]; +} + +static void +intel_dp_save(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + dp_priv->save_DP = I915_READ(dp_priv->output_reg); + intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET, + dp_priv->save_link_configuration, + sizeof (dp_priv->save_link_configuration)); +} + +static uint8_t +intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +static uint8_t +intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} + + +#if 0 +static char *voltage_names[] = { + "0.4V", "0.6V", "0.8V", "1.2V" +}; +static char *pre_emph_names[] = { + "0dB", "3.5dB", "6dB", "9.5dB" +}; +static char *link_train_names[] = { + "pattern 1", "pattern 2", "idle", "off" +}; +#endif + +/* + * These are source-specific values; current Intel hardware supports + * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB + */ +#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 + +static uint8_t +intel_dp_pre_emphasis_max(uint8_t voltage_swing) +{ + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } +} + +static void +intel_get_adjust_train(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane_count, + uint8_t train_set[4]) +{ + uint8_t v = 0; + uint8_t p = 0; + int lane; + + for (lane = 0; lane < lane_count; lane++) { + uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane); + + if (this_v > v) + v = this_v; + if (this_p > p) + p = this_p; + } + + if (v >= I830_DP_VOLTAGE_MAX) + v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + + if (p >= intel_dp_pre_emphasis_max(v)) + p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + for (lane = 0; lane < 4; lane++) + train_set[lane] = v | p; +} + +static uint32_t +intel_dp_signal_levels(uint8_t train_set, int lane_count) +{ + uint32_t signal_levels = 0; + + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + default: + signal_levels |= DP_VOLTAGE_0_4; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + signal_levels |= DP_VOLTAGE_0_6; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + signal_levels |= DP_VOLTAGE_0_8; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + signal_levels |= DP_VOLTAGE_1_2; + break; + } + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + default: + signal_levels |= DP_PRE_EMPHASIS_0; + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + signal_levels |= DP_PRE_EMPHASIS_3_5; + break; + case DP_TRAIN_PRE_EMPHASIS_6: + signal_levels |= DP_PRE_EMPHASIS_6; + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + signal_levels |= DP_PRE_EMPHASIS_9_5; + break; + } + return signal_levels; +} + +static uint8_t +intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_LANE0_1_STATUS + (lane >> 1); + int s = (lane & 1) * 4; + uint8_t l = intel_dp_link_status(link_status, i); + + return (l >> s) & 0xf; +} + +/* Check for clock recovery is done on all channels */ +static bool +intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + int lane; + uint8_t lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return false; + } + return true; +} + +/* Check to see if channel eq is done on all channels */ +#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ + DP_LANE_CHANNEL_EQ_DONE|\ + DP_LANE_SYMBOL_LOCKED) +static bool +intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + uint8_t lane_align; + uint8_t lane_status; + int lane; + + lane_align = intel_dp_link_status(link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return false; + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) + return false; + } + return true; +} + +static bool +intel_dp_set_link_train(struct intel_output *intel_output, + uint32_t dp_reg_value, + uint8_t dp_train_pat, + uint8_t train_set[4], + bool first) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int ret; + + I915_WRITE(dp_priv->output_reg, dp_reg_value); + POSTING_READ(dp_priv->output_reg); + if (first) + intel_wait_for_vblank(dev); + + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, + dp_train_pat); + + ret = intel_dp_aux_native_write(intel_output, + DP_TRAINING_LANE0_SET, train_set, 4); + if (ret != 4) + return false; + + return true; +} + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t train_set[4]; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + int i; + uint8_t voltage; + bool clock_recovery = false; + bool channel_eq = false; + bool first = true; + int tries; + + /* Write the link configuration data */ + intel_dp_aux_native_write(intel_output, 0x100, + link_configuration, DP_LINK_CONFIGURATION_SIZE); + + DP |= DP_PORT_EN; + DP &= ~DP_LINK_TRAIN_MASK; + memset(train_set, 0, 4); + voltage = 0xff; + tries = 0; + clock_recovery = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1, + DP_TRAINING_PATTERN_1, train_set, first)) + break; + first = false; + /* Set training pattern 1 */ + + udelay(100); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) { + clock_recovery = true; + break; + } + + /* Check to see if we've tried the max voltage */ + for (i = 0; i < dp_priv->lane_count; i++) + if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == dp_priv->lane_count) + break; + + /* Check to see if we've tried the same voltage 5 times */ + if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + } + + /* channel equalization */ + tries = 0; + channel_eq = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + /* channel eq pattern */ + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2, + DP_TRAINING_PATTERN_2, train_set, + false)) + break; + + udelay(400); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) { + channel_eq = true; + break; + } + + /* Try 5 times */ + if (tries > 5) + break; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + ++tries; + } + + I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF); + POSTING_READ(dp_priv->output_reg); + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); +} + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN); + POSTING_READ(dp_priv->output_reg); +} + +static void +intel_dp_restore(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (dp_priv->save_DP & DP_PORT_EN) + intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration); + else + intel_dp_link_down(intel_output, dp_priv->save_DP); +} + +#if 0 +/* + * According to DP spec + * 5.1.2: + * 1. Read DPCD + * 2. Configure link according to Receiver Capabilities + * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 + * 4. Check link status on receipt of hot-plug interrupt + */ + +static void +intel_dp_check_link_status(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + + if (!intel_output->enc.crtc) + return; + + if (!intel_dp_get_link_status(intel_output, link_status)) { + intel_dp_link_down(intel_output, dp_priv->DP); + return; + } + + if (!intel_channel_eq_ok(link_status, dp_priv->lane_count)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); +} +#endif + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. + * + * \return true if DP port is connected. + * \return false if DP port is disconnected. + */ +static enum drm_connector_status +intel_dp_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t temp, bit; + enum drm_connector_status status; + + dp_priv->has_audio = false; + + temp = I915_READ(PORT_HOTPLUG_EN); + + I915_WRITE(PORT_HOTPLUG_EN, + temp | + DPB_HOTPLUG_INT_EN | + DPC_HOTPLUG_INT_EN | + DPD_HOTPLUG_INT_EN); + + POSTING_READ(PORT_HOTPLUG_EN); + + switch (dp_priv->output_reg) { + case DP_B: + bit = DPB_HOTPLUG_INT_STATUS; + break; + case DP_C: + bit = DPC_HOTPLUG_INT_STATUS; + break; + case DP_D: + bit = DPD_HOTPLUG_INT_STATUS; + break; + default: + return connector_status_unknown; + } + + temp = I915_READ(PORT_HOTPLUG_STAT); + + if ((temp & bit) == 0) + return connector_status_disconnected; + + status = connector_status_disconnected; + if (intel_dp_aux_native_read(intel_output, + 0x000, dp_priv->dpcd, + sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd)) + { + if (dp_priv->dpcd[0] != 0) + status = connector_status_connected; + } + return status; +} + +static int intel_dp_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* We should parse the EDID data and find out if it has an audio sink + */ + + return intel_ddc_get_modes(intel_output); +} + +static void +intel_dp_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = { + .dpms = intel_dp_dpms, + .mode_fixup = intel_dp_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_dp_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_dp_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .save = intel_dp_save, + .restore = intel_dp_restore, + .detect = intel_dp_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_dp_destroy, +}; + +static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { + .get_modes = intel_dp_get_modes, + .mode_valid = intel_dp_mode_valid, + .best_encoder = intel_best_encoder, +}; + +static void intel_dp_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_dp_enc_funcs = { + .destroy = intel_dp_enc_destroy, +}; + +void +intel_dp_init(struct drm_device *dev, int output_reg) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_dp_priv *dp_priv; + + intel_output = kcalloc(sizeof(struct intel_output) + + sizeof(struct intel_dp_priv), 1, GFP_KERNEL); + if (!intel_output) + return; + + dp_priv = (struct intel_dp_priv *)(intel_output + 1); + + connector = &intel_output->base; + drm_connector_init(dev, connector, &intel_dp_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); + drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); + + intel_output->type = INTEL_OUTPUT_DISPLAYPORT; + + connector->interlace_allowed = true; + connector->doublescan_allowed = 0; + + dp_priv->intel_output = intel_output; + dp_priv->output_reg = output_reg; + dp_priv->has_audio = false; + intel_output->dev_priv = dp_priv; + + drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs, + DRM_MODE_ENCODER_TMDS); + drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs); + + drm_mode_connector_attach_encoder(&intel_output->base, + &intel_output->enc); + drm_sysfs_connector_add(connector); + + /* Set up the DDC bus. */ + intel_dp_i2c_init(intel_output, + (output_reg == DP_B) ? "DPDDC-B" : + (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D"); + intel_output->ddc_bus = &dp_priv->adapter; + + /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written + * 0xd. Failure to do so will result in spurious interrupts being + * generated on the port when a cable is not attached. + */ + if (IS_G4X(dev) && !IS_GM45(dev)) { + u32 temp = I915_READ(PEG_BAND_GAP_DATA); + I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); + } +} diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h new file mode 100644 index 00000000000..2b38054d3b6 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.h @@ -0,0 +1,144 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _INTEL_DP_H_ +#define _INTEL_DP_H_ + +/* From the VESA DisplayPort spec */ + +#define AUX_NATIVE_WRITE 0x8 +#define AUX_NATIVE_READ 0x9 +#define AUX_I2C_WRITE 0x0 +#define AUX_I2C_READ 0x1 +#define AUX_I2C_STATUS 0x2 +#define AUX_I2C_MOT 0x4 + +#define AUX_NATIVE_REPLY_ACK (0x0 << 4) +#define AUX_NATIVE_REPLY_NACK (0x1 << 4) +#define AUX_NATIVE_REPLY_DEFER (0x2 << 4) +#define AUX_NATIVE_REPLY_MASK (0x3 << 4) + +#define AUX_I2C_REPLY_ACK (0x0 << 6) +#define AUX_I2C_REPLY_NACK (0x1 << 6) +#define AUX_I2C_REPLY_DEFER (0x2 << 6) +#define AUX_I2C_REPLY_MASK (0x3 << 6) + +/* AUX CH addresses */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 + +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3) +# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3) +# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3) +# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 + +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 + +#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +struct i2c_algo_dp_aux_data { + bool running; + u16 address; + int (*aux_ch) (struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes); +}; + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter); + +#endif /* _INTEL_DP_H_ */ diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c new file mode 100644 index 00000000000..4e60f14b1a6 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp_i2c.c @@ -0,0 +1,272 @@ +/* + * Copyright © 2009 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "intel_dp.h" + +/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +static int +i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + uint16_t address = algo_data->address; + uint8_t msg[5]; + uint8_t reply[2]; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = AUX_I2C_READ << 4; + else + msg[0] = AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= AUX_I2C_MOT << 4; + + msg[1] = address >> 8; + msg[2] = address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } + + for (;;) { + ret = (*algo_data->aux_ch)(adapter, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + printk(KERN_ERR "aux_ch failed %d\n", ret); + return ret; + } + switch (reply[0] & AUX_I2C_REPLY_MASK) { + case AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case AUX_I2C_REPLY_NACK: + printk(KERN_ERR "aux_ch nack\n"); + return -EREMOTEIO; + case AUX_I2C_REPLY_DEFER: + printk(KERN_ERR "aux_ch defer\n"); + udelay(100); + break; + default: + printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]); + return -EREMOTEIO; + } + } +} + +/* + * I2C over AUX CH + */ + +/* + * Send the address. If the I2C link is running, this 'restarts' + * the connection with the new address, this is used for doing + * a write followed by a read (as needed for DDC) + */ +static int +i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_START; + int ret; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + algo_data->address = address; + algo_data->running = true; + ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + return ret; +} + +/* + * Stop the I2C transaction. This closes out the link, sending + * a bare address packet with the MOT bit turned off + */ +static void +i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_STOP; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + if (algo_data->running) { + (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + algo_data->running = false; + } +} + +/* + * Write a single byte to the current I2C address, the + * the I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); + return ret; +} + +/* + * Read a single byte from the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); + return ret; +} + +static int +i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + int ret = 0; + bool reading = false; + int m; + int b; + + for (m = 0; m < num; m++) { + u16 len = msgs[m].len; + u8 *buf = msgs[m].buf; + reading = (msgs[m].flags & I2C_M_RD) != 0; + ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); + if (ret < 0) + break; + if (reading) { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); + if (ret < 0) + break; + } + } else { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); + if (ret < 0) + break; + } + } + if (ret < 0) + break; + } + if (ret >= 0) + ret = num; + i2c_algo_dp_aux_stop(adapter, reading); + printk(KERN_ERR "dp_aux_xfer return %d\n", ret); + return ret; +} + +static u32 +i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm i2c_dp_aux_algo = { + .master_xfer = i2c_algo_dp_aux_xfer, + .functionality = i2c_algo_dp_aux_functionality, +}; + +static void +i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) +{ + (void) i2c_algo_dp_aux_address(adapter, 0, false); + (void) i2c_algo_dp_aux_stop(adapter, false); + +} + +static int +i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) +{ + adapter->algo = &i2c_dp_aux_algo; + adapter->retries = 3; + i2c_dp_aux_reset_bus(adapter); + return 0; +} + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter) +{ + int error; + + error = i2c_dp_aux_prepare_bus(adapter); + if (error) + return error; + error = i2c_add_adapter(adapter); + return error; +} +EXPORT_SYMBOL(i2c_dp_aux_add_bus); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index c5858792c80..004541c935a 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -54,6 +54,7 @@ #define INTEL_OUTPUT_LVDS 4 #define INTEL_OUTPUT_TVOUT 5 #define INTEL_OUTPUT_HDMI 6 +#define INTEL_OUTPUT_DISPLAYPORT 7 #define INTEL_DVO_CHIP_NONE 0 #define INTEL_DVO_CHIP_LVDS 1 @@ -116,6 +117,10 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device); extern void intel_dvo_init(struct drm_device *dev); extern void intel_tv_init(struct drm_device *dev); extern void intel_lvds_init(struct drm_device *dev); +extern void intel_dp_init(struct drm_device *dev, int dp_reg); +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); extern void intel_crtc_load_lut(struct drm_crtc *crtc); extern void intel_encoder_prepare (struct drm_encoder *encoder); -- cgit v1.2.3 From c8110e52b753f3d105604df84ac06cd6d1645409 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 6 May 2009 11:51:10 -0700 Subject: drm/i915: Use hotplug callback to retrain DP link When a DP monitor is plugged back in, it needs to be retrained if it was active before. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index c57cdab4f4a..3f8d7b449e7 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -47,6 +47,7 @@ struct intel_dp_priv { uint32_t save_DP; uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE]; bool has_audio; + int dpms_mode; uint8_t link_bw; uint8_t lane_count; uint8_t dpcd[4]; @@ -527,6 +528,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (!(dp_reg & DP_PORT_EN)) intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); } + dp_priv->dpms_mode = mode; } /* @@ -902,7 +904,6 @@ intel_dp_restore(struct drm_connector *connector) intel_dp_link_down(intel_output, dp_priv->save_DP); } -#if 0 /* * According to DP spec * 5.1.2: @@ -929,7 +930,6 @@ intel_dp_check_link_status(struct intel_output *intel_output) if (!intel_channel_eq_ok(link_status, dp_priv->lane_count)) intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); } -#endif /** * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. @@ -1043,6 +1043,15 @@ static const struct drm_encoder_funcs intel_dp_enc_funcs = { .destroy = intel_dp_enc_destroy, }; +void +intel_dp_hot_plug(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON) + intel_dp_check_link_status(intel_output); +} + void intel_dp_init(struct drm_device *dev, int output_reg) { @@ -1071,6 +1080,7 @@ intel_dp_init(struct drm_device *dev, int output_reg) dp_priv->intel_output = intel_output; dp_priv->output_reg = output_reg; dp_priv->has_audio = false; + dp_priv->dpms_mode = DRM_MODE_DPMS_ON; intel_output->dev_priv = dp_priv; drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs, @@ -1086,6 +1096,7 @@ intel_dp_init(struct drm_device *dev, int output_reg) (output_reg == DP_B) ? "DPDDC-B" : (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D"); intel_output->ddc_bus = &dp_priv->adapter; + intel_output->hot_plug = intel_dp_hot_plug; /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written * 0xd. Failure to do so will result in spurious interrupts being -- cgit v1.2.3 From e4b366996bc58a02b9dc35db3ef83f0454553f50 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 5 Jun 2009 19:22:17 -0700 Subject: drm/i915: Split array of DAC limits into separate structures. The array of DAC limits was only ever referenced with #defined constant offsets, and keeping those #define values in sync with the array itself was a nuisance. This will make future changes to the set of DAC limits less error-prone. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 108 +++++++++++++++++------------------ 1 file changed, 51 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5af55aa0d7a..73e7b9cecac 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -128,20 +128,6 @@ struct intel_limit { #define I9XX_P2_LVDS_FAST 7 #define I9XX_P2_LVDS_SLOW_LIMIT 112000 -#define INTEL_LIMIT_I8XX_DVO_DAC 0 -#define INTEL_LIMIT_I8XX_LVDS 1 -#define INTEL_LIMIT_I9XX_SDVO_DAC 2 -#define INTEL_LIMIT_I9XX_LVDS 3 -#define INTEL_LIMIT_G4X_SDVO 4 -#define INTEL_LIMIT_G4X_HDMI_DAC 5 -#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6 -#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7 -#define INTEL_LIMIT_G4X_DISPLAY_PORT 8 -#define INTEL_LIMIT_IGD_SDVO_DAC 9 -#define INTEL_LIMIT_IGD_LVDS 10 -#define INTEL_LIMIT_IGDNG_SDVO_DAC 11 -#define INTEL_LIMIT_IGDNG_LVDS 12 - /*The parameter is for SDVO on G4x platform*/ #define G4X_DOT_SDVO_MIN 25000 #define G4X_DOT_SDVO_MAX 270000 @@ -281,8 +267,7 @@ static bool intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); -static const intel_limit_t intel_limits[] = { - { /* INTEL_LIMIT_I8XX_DVO_DAC */ +static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, @@ -294,8 +279,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I8XX_LVDS */ +}; + +static const intel_limit_t intel_limits_i8xx_lvds = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, @@ -307,8 +293,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I9XX_SDVO_DAC */ +}; + +static const intel_limit_t intel_limits_i9xx_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, @@ -320,8 +307,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I9XX_LVDS */ +}; + +static const intel_limit_t intel_limits_i9xx_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, @@ -336,9 +324,10 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - }, +}; + /* below parameter and function is for G4X Chipset Family*/ - { /* INTEL_LIMIT_G4X_SDVO */ +static const intel_limit_t intel_limits_g4x_sdvo = { .dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX }, @@ -352,8 +341,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_SDVO_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_HDMI_DAC */ +}; + +static const intel_limit_t intel_limits_g4x_hdmi = { .dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX }, @@ -367,8 +357,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_HDMI_DAC_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */ +}; + +static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, @@ -390,8 +381,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */ +}; + +static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN, .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, @@ -413,8 +405,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_DISPLAY_PORT */ +}; + +static const intel_limit_t intel_limits_g4x_display_port = { .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN, .max = G4X_DOT_DISPLAY_PORT_MAX }, .vco = { .min = G4X_VCO_MIN, @@ -435,8 +428,9 @@ static const intel_limit_t intel_limits[] = { .p2_slow = G4X_P2_DISPLAY_PORT_SLOW, .p2_fast = G4X_P2_DISPLAY_PORT_FAST }, .find_pll = intel_find_pll_g4x_dp, - }, - { /* INTEL_LIMIT_IGD_SDVO */ +}; + +static const intel_limit_t intel_limits_igd_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, .n = { .min = IGD_N_MIN, .max = IGD_N_MAX }, @@ -448,8 +442,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_IGD_LVDS */ +}; + +static const intel_limit_t intel_limits_igd_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, .n = { .min = IGD_N_MIN, .max = IGD_N_MAX }, @@ -462,8 +457,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_IGDNG_SDVO_DAC */ +}; + +static const intel_limit_t intel_limits_igdng_sdvo = { .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, @@ -476,8 +472,9 @@ static const intel_limit_t intel_limits[] = { .p2_slow = IGDNG_P2_SDVO_DAC_SLOW, .p2_fast = IGDNG_P2_SDVO_DAC_FAST }, .find_pll = intel_igdng_find_best_PLL, - }, - { /* INTEL_LIMIT_IGDNG_LVDS */ +}; + +static const intel_limit_t intel_limits_igdng_lvds = { .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, @@ -490,16 +487,15 @@ static const intel_limit_t intel_limits[] = { .p2_slow = IGDNG_P2_LVDS_SLOW, .p2_fast = IGDNG_P2_LVDS_FAST }, .find_pll = intel_igdng_find_best_PLL, - }, }; static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc) { const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS]; + limit = &intel_limits_igdng_lvds; else - limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC]; + limit = &intel_limits_igdng_sdvo; return limit; } @@ -514,21 +510,19 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) /* LVDS with dual channel */ - limit = &intel_limits - [INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS]; + limit = &intel_limits_g4x_dual_channel_lvds; else /* LVDS with dual channel */ - limit = &intel_limits - [INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS]; + limit = &intel_limits_g4x_single_channel_lvds; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { - limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC]; + limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { - limit = &intel_limits[INTEL_LIMIT_G4X_SDVO]; + limit = &intel_limits_g4x_sdvo; } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) { - limit = &intel_limits[INTEL_LIMIT_G4X_DISPLAY_PORT]; + limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ - limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + limit = &intel_limits_i9xx_sdvo; return limit; } @@ -544,19 +538,19 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) limit = intel_g4x_limit(crtc); } else if (IS_I9XX(dev) && !IS_IGD(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; + limit = &intel_limits_i9xx_lvds; else - limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + limit = &intel_limits_i9xx_sdvo; } else if (IS_IGD(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_IGD_LVDS]; + limit = &intel_limits_igd_lvds; else - limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC]; + limit = &intel_limits_igd_sdvo; } else { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; + limit = &intel_limits_i8xx_lvds; else - limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; + limit = &intel_limits_i8xx_dvo; } return limit; } -- cgit v1.2.3 From b11248df4c0decb1e473d5025f237be32c0f67bb Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 11 Jun 2009 22:28:56 -0700 Subject: drm/i915: Add CLKCFG register definition The CLKCFG register holds information about the GMCH plls and input clock values. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_reg.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f6237a0b113..544d5677a2f 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -569,6 +569,19 @@ #define C0DRB3 0x10206 #define C1DRB3 0x10606 +/* Clocking configuration register */ +#define CLKCFG 0x10c00 +#define CLKCFG_FSB_400 (0 << 0) /* hrawclk 100 */ +#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ +#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ +#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ +#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ +#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ +/* this is a guess, could be 5 as well */ +#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_1600_ALT (5 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_MASK (7 << 0) + /** GM965 GM45 render standby register */ #define MCHBAR_RENDER_STANDBY 0x111B8 -- cgit v1.2.3 From a5b3da543d4882d57a2f3e05d37ad8e1e1453489 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 11 Jun 2009 22:30:32 -0700 Subject: drm/i915: Clarify error returns from display port aux channel I/O Use distinct error return values for each kind of aux channel I/O failure. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3f8d7b449e7..818fe34f2b5 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -209,15 +209,19 @@ intel_dp_aux_ch(struct intel_output *intel_output, if ((status & DP_AUX_CH_CTL_DONE) == 0) { printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status); - return -1; + return -EBUSY; } /* Check for timeout or receive error. * Timeouts occur when the sink is not connected */ - if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | DP_AUX_CH_CTL_RECEIVE_ERROR)) { - printk(KERN_ERR "dp_aux_ch error status 0x%08x\n", status); - return -1; + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status); + return -EIO; + } + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status); + return -ETIMEDOUT; } /* Unload any bytes sent back from the other side */ @@ -263,7 +267,7 @@ intel_dp_aux_native_write(struct intel_output *intel_output, else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) udelay(100); else - return -1; + return -EIO; } return send_bytes; } @@ -299,7 +303,9 @@ intel_dp_aux_native_read(struct intel_output *intel_output, for (;;) { ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, reply, reply_bytes); - if (ret <= 0) + if (ret == 0) + return -EPROTO; + if (ret < 0) return ret; ack = reply[0]; if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { @@ -309,7 +315,7 @@ intel_dp_aux_native_read(struct intel_output *intel_output, else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) udelay(100); else - return -1; + return -EIO; } } -- cgit v1.2.3 From fb0f8fbf97e8a25074c81c629500d94cafa9e366 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 11 Jun 2009 22:31:31 -0700 Subject: drm/i915: Generate 2MHz clock for display port aux channel I/O. Retry I/O. The display port aux channel clock is taken from the hrawclk value, which is provided to the chip as the FSB frequency (as far as I can determine). The strapping values for that are available in the CLKCFG register, now used to select an appropriate divider to generate a 2MHz clock. In addition, the DisplayPort spec requires that each aux channel I/O be retried 'at least 3 times' in case the sink is idle when the first request comes in. Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 102 +++++++++++++++++++++++++++------------- 1 file changed, 70 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 818fe34f2b5..8f8d37d5663 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -154,6 +154,36 @@ unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) dst[i] = src >> ((3-i) * 8); } +/* hrawclock is 1/4 the FSB frequency */ +static int +intel_hrawclk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t clkcfg; + + clkcfg = I915_READ(CLKCFG); + switch (clkcfg & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_400: + return 100; + case CLKCFG_FSB_533: + return 133; + case CLKCFG_FSB_667: + return 166; + case CLKCFG_FSB_800: + return 200; + case CLKCFG_FSB_1067: + return 266; + case CLKCFG_FSB_1333: + return 333; + /* these two are just a guess; one of them might be right */ + case CLKCFG_FSB_1600: + case CLKCFG_FSB_1600_ALT: + return 400; + default: + return 133; + } +} + static int intel_dp_aux_ch(struct intel_output *intel_output, uint8_t *send, int send_bytes, @@ -169,44 +199,52 @@ intel_dp_aux_ch(struct intel_output *intel_output, int recv_bytes; uint32_t ctl; uint32_t status; - - /* Load the send data into the aux channel data registers */ - for (i = 0; i < send_bytes; i += 4) { - uint32_t d = pack_aux(send + i, send_bytes - i);; - - I915_WRITE(ch_data + i, d); - } + uint32_t aux_clock_divider; + int try; /* The clock divider is based off the hrawclk, - * and would like to run at 2MHz. The 133 below assumes - * a 266MHz hrawclk; need to figure out how we're supposed - * to know what hrawclk is... + * and would like to run at 2MHz. So, take the + * hrawclk value and divide by 2 and use that */ - ctl = (DP_AUX_CH_CTL_SEND_BUSY | - DP_AUX_CH_CTL_TIME_OUT_1600us | - (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | - (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | - (133 << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR); - - /* Send the command and wait for it to complete */ - I915_WRITE(ch_ctl, ctl); - (void) I915_READ(ch_ctl); - for (;;) { - udelay(100); - status = I915_READ(ch_ctl); - if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + aux_clock_divider = intel_hrawclk(dev) / 2; + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) { + uint32_t d = pack_aux(send + i, send_bytes - i);; + + I915_WRITE(ch_data + i, d); + } + + ctl = (DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_400us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + + /* Send the command and wait for it to complete */ + I915_WRITE(ch_ctl, ctl); + (void) I915_READ(ch_ctl); + for (;;) { + udelay(100); + status = I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + } + + /* Clear done status and any errors */ + I915_WRITE(ch_ctl, (ctl | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)); + (void) I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0) break; } - /* Clear done status and any errors */ - I915_WRITE(ch_ctl, (ctl | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR)); - (void) I915_READ(ch_ctl); - if ((status & DP_AUX_CH_CTL_DONE) == 0) { printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status); return -EBUSY; -- cgit v1.2.3 From 8c52da503b7e4cf961807f11824e3258ef9f7f1c Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 18 Jun 2009 20:22:19 -0700 Subject: drm/i915: Add missing dependency on Intel AGP support. Users could accidentally enable AGP but not the Intel AGP support, and get a DRM that doesn't probe as a result. Bug #22358. Signed-off-by: Eric Anholt --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index c961fe415ae..39b393d38bb 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -81,6 +81,7 @@ config DRM_I830 config DRM_I915 tristate "i915 driver" + depends on AGP_INTEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v1.2.3 From 4859484b0957ddc7fe3e0fa349d98b0f1c7876bd Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 19 Jun 2009 23:24:11 +0200 Subject: HID: hiddev, fix lock imbalance Add omitted BKL to one switch/case. Cc: Stable Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index e9b436d2d94..39e27f4be4a 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -527,8 +527,10 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, goto goodreturn; case HIDIOCGCOLLECTIONINDEX: + i = field->usage[uref->usage_index].collection_index; + unlock_kernel(); kfree(uref_multi); - return field->usage[uref->usage_index].collection_index; + return i; case HIDIOCGUSAGES: for (i = 0; i < uref_multi->num_values; i++) uref_multi->values[i] = -- cgit v1.2.3 From 9e06dd39f2b6d7e35981e0d7aded618686b32ccb Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 22 Jun 2009 18:05:12 -0700 Subject: drm/i915: correct suspend/resume ordering We need to save register state *after* idling GEM, clearing the ring, and uninstalling the IRQ handler, or we might end up saving bogus fence regs, for one. Our restore ordering should already be correct, since we do GEM, ring and IRQ init after restoring the last register state, which prevents us from clobbering things. I put this together to potentially address a bug, but I haven't heard back if it fixes it yet. However I think it stands on its own, so I'm sending it in. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 98560e1e899..e3cb4025e32 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -67,8 +67,6 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) pci_save_state(dev->pdev); - i915_save_state(dev); - /* If KMS is active, we do the leavevt stuff here */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { if (i915_gem_idle(dev)) @@ -77,6 +75,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) drm_irq_uninstall(dev); } + i915_save_state(dev); + intel_opregion_free(dev, 1); if (state.event == PM_EVENT_SUSPEND) { -- cgit v1.2.3 From 3fbe18d65d66054667aaee849bed74674bb50062 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 22 Jun 2009 15:31:25 +0800 Subject: drm/i915: Add support for changing LVDS panel fitting using an output property. Previously the driver would always scale the chosen video mode to fill the panel. This adds 1:1 and maintain-aspect-ratio scaling modes. v2: the drm_calloc/drm_free is replaced by kzalloc/kfree based on Eric's suggestion. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 16 +++ drivers/gpu/drm/i915/intel_lvds.c | 285 +++++++++++++++++++++++++++++++++++--- 2 files changed, 280 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 544d5677a2f..88bf7521405 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -847,9 +847,25 @@ #define HORIZ_INTERP_MASK (3 << 6) #define HORIZ_AUTO_SCALE (1 << 5) #define PANEL_8TO6_DITHER_ENABLE (1 << 3) +#define PFIT_FILTER_FUZZY (0 << 24) +#define PFIT_SCALING_AUTO (0 << 26) +#define PFIT_SCALING_PROGRAMMED (1 << 26) +#define PFIT_SCALING_PILLAR (2 << 26) +#define PFIT_SCALING_LETTER (3 << 26) #define PFIT_PGM_RATIOS 0x61234 #define PFIT_VERT_SCALE_MASK 0xfff00000 #define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +/* Pre-965 */ +#define PFIT_VERT_SCALE_SHIFT 20 +#define PFIT_VERT_SCALE_MASK 0xfff00000 +#define PFIT_HORIZ_SCALE_SHIFT 4 +#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +/* 965+ */ +#define PFIT_VERT_SCALE_SHIFT_965 16 +#define PFIT_VERT_SCALE_MASK_965 0x1fff0000 +#define PFIT_HORIZ_SCALE_SHIFT_965 0 +#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff + #define PFIT_AUTO_RATIOS 0x61238 /* Backlight control */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 345e5055f1c..f416ead7120 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -39,6 +39,21 @@ #define I915_LVDS "i915_lvds" +/* + * the following four scaling options are defined. + * #define DRM_MODE_SCALE_NON_GPU 0 + * #define DRM_MODE_SCALE_FULLSCREEN 1 + * #define DRM_MODE_SCALE_NO_SCALE 2 + * #define DRM_MODE_SCALE_ASPECT 3 + */ + +/* Private structure for the integrated LVDS support */ +struct intel_lvds_priv { + int fitting_mode; + u32 pfit_control; + u32 pfit_pgm_ratios; +}; + /** * Sets the backlight level. * @@ -213,10 +228,24 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + /* + * float point operation is not supported . So the PANEL_RATIO_FACTOR + * is defined, which can avoid the float point computation when + * calculating the panel ratio. + */ +#define PANEL_RATIO_FACTOR 8192 struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct drm_encoder *tmp_encoder; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + u32 pfit_control = 0, pfit_pgm_ratios = 0; + int left_border = 0, right_border = 0, top_border = 0; + int bottom_border = 0; + bool border = 0; + int panel_ratio, desired_ratio, vert_scale, horiz_scale; + int horiz_ratio, vert_ratio; /* Should never happen!! */ if (!IS_I965G(dev) && intel_crtc->pipe == 0) { @@ -232,7 +261,9 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, return false; } } - + /* If we don't have a panel mode, there is nothing we can do */ + if (dev_priv->panel_fixed_mode == NULL) + return true; /* * If we have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, @@ -256,6 +287,191 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); } + /* Make sure pre-965s set dither correctly */ + if (!IS_I965G(dev)) { + if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + + /* Native modes don't need fitting */ + if (adjusted_mode->hdisplay == mode->hdisplay && + adjusted_mode->vdisplay == mode->vdisplay) { + pfit_pgm_ratios = 0; + border = 0; + goto out; + } + + /* 965+ wants fuzzy fitting */ + if (IS_I965G(dev)) + pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) | + PFIT_FILTER_FUZZY; + + /* + * Deal with panel fitting options. Figure out how to stretch the + * image based on its aspect ratio & the current panel fitting mode. + */ + panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR / + adjusted_mode->vdisplay; + desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR / + mode->vdisplay; + /* + * Enable automatic panel scaling for non-native modes so that they fill + * the screen. Should be enabled before the pipe is enabled, according + * to register description and PRM. + * Change the value here to see the borders for debugging + */ + I915_WRITE(BCLRPAT_A, 0); + I915_WRITE(BCLRPAT_B, 0); + + switch (lvds_priv->fitting_mode) { + case DRM_MODE_SCALE_NO_SCALE: + /* + * For centered modes, we have to calculate border widths & + * heights and modify the values programmed into the CRTC. + */ + left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2; + right_border = left_border; + if (mode->hdisplay & 1) + right_border++; + top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + /* Set active & border values */ + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_hblank_start = mode->hdisplay + + right_border - 1; + adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal - + left_border - 1; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start; + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hblank_end; + adjusted_mode->crtc_vdisplay = mode->vdisplay; + adjusted_mode->crtc_vblank_start = mode->vdisplay + + bottom_border - 1; + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal - + top_border - 1; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start; + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vblank_end; + border = 1; + break; + case DRM_MODE_SCALE_ASPECT: + /* Scale but preserve the spect ratio */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) { + /* 965+ is easy, it does everything in hw */ + if (panel_ratio > desired_ratio) + pfit_control |= PFIT_SCALING_PILLAR; + else if (panel_ratio < desired_ratio) + pfit_control |= PFIT_SCALING_LETTER; + else + pfit_control |= PFIT_SCALING_AUTO; + } else { + /* + * For earlier chips we have to calculate the scaling + * ratio by hand and program it into the + * PFIT_PGM_RATIO register + */ + u32 horiz_bits, vert_bits, bits = 12; + horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->hdisplay; + vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->vdisplay; + horiz_scale = adjusted_mode->hdisplay * + PANEL_RATIO_FACTOR / mode->hdisplay; + vert_scale = adjusted_mode->vdisplay * + PANEL_RATIO_FACTOR / mode->vdisplay; + + /* retain aspect ratio */ + if (panel_ratio > desired_ratio) { /* Pillar */ + u32 scaled_width; + scaled_width = mode->hdisplay * vert_scale / + PANEL_RATIO_FACTOR; + horiz_ratio = vert_ratio; + pfit_control |= (VERT_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Pillar will have left/right borders */ + left_border = (adjusted_mode->hdisplay - + scaled_width) / 2; + right_border = left_border; + if (mode->hdisplay & 1) /* odd resolutions */ + right_border++; + adjusted_mode->crtc_hdisplay = scaled_width; + adjusted_mode->crtc_hblank_start = + scaled_width + right_border - 1; + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_htotal - left_border - 1; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start; + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hblank_end; + border = 1; + } else if (panel_ratio < desired_ratio) { /* letter */ + u32 scaled_height = mode->vdisplay * + horiz_scale / PANEL_RATIO_FACTOR; + vert_ratio = horiz_ratio; + pfit_control |= (HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Letterbox will have top/bottom border */ + top_border = (adjusted_mode->vdisplay - + scaled_height) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + adjusted_mode->crtc_vdisplay = scaled_height; + adjusted_mode->crtc_vblank_start = + scaled_height + bottom_border - 1; + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vtotal - top_border - 1; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start; + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vblank_end; + border = 1; + } else { + /* Aspects match, Let hw scale both directions */ + pfit_control |= (VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + } + horiz_bits = (1 << bits) * horiz_ratio / + PANEL_RATIO_FACTOR; + vert_bits = (1 << bits) * vert_ratio / + PANEL_RATIO_FACTOR; + pfit_pgm_ratios = + ((vert_bits << PFIT_VERT_SCALE_SHIFT) & + PFIT_VERT_SCALE_MASK) | + ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) & + PFIT_HORIZ_SCALE_MASK); + } + break; + + case DRM_MODE_SCALE_FULLSCREEN: + /* + * Full scaling, even if it changes the aspect ratio. + * Fortunately this is all done for us in hw. + */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) + pfit_control |= PFIT_SCALING_AUTO; + else + pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + break; + default: + break; + } + +out: + lvds_priv->pfit_control = pfit_control; + lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the @@ -301,8 +517,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - u32 pfit_control; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; /* * The LVDS pin pair will already have been turned on in the @@ -319,22 +535,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, * screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ - if (mode->hdisplay != adjusted_mode->hdisplay || - mode->vdisplay != adjusted_mode->vdisplay) - pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | - HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | - HORIZ_INTERP_BILINEAR); - else - pfit_control = 0; - - if (!IS_I965G(dev)) { - if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - } - else - pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; - - I915_WRITE(PFIT_CONTROL, pfit_control); + I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control); } /** @@ -406,6 +608,34 @@ static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = + to_intel_output(connector); + + if (property == dev->mode_config.scaling_mode_property && + connector->encoder) { + struct drm_crtc *crtc = connector->encoder->crtc; + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + if (value == DRM_MODE_SCALE_NON_GPU) { + DRM_DEBUG_KMS(I915_LVDS, + "non_GPU property is unsupported\n"); + return 0; + } + if (lvds_priv->fitting_mode == value) { + /* the LVDS scaling property is not changed */ + return 0; + } + lvds_priv->fitting_mode = value; + if (crtc && crtc->enabled) { + /* + * If the CRTC is enabled, the display will be changed + * according to the new panel fitting mode. + */ + drm_crtc_helper_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); + } + } + return 0; } @@ -518,6 +748,7 @@ void intel_lvds_init(struct drm_device *dev) struct drm_encoder *encoder; struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; + struct intel_lvds_priv *lvds_priv; u32 lvds; int pipe, gpio = GPIOC; @@ -531,7 +762,8 @@ void intel_lvds_init(struct drm_device *dev) gpio = PCH_GPIOC; } - intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + intel_output = kzalloc(sizeof(struct intel_output) + + sizeof(struct intel_lvds_priv), GFP_KERNEL); if (!intel_output) { return; } @@ -553,7 +785,18 @@ void intel_lvds_init(struct drm_device *dev) connector->interlace_allowed = false; connector->doublescan_allowed = false; + lvds_priv = (struct intel_lvds_priv *)(intel_output + 1); + intel_output->dev_priv = lvds_priv; + /* create the scaling mode property */ + drm_mode_create_scaling_mode_property(dev); + /* + * the initial panel fitting mode will be FULL_SCREEN. + */ + drm_connector_attach_property(&intel_output->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN; /* * LVDS discovery: * 1) check for EDID on DDC @@ -649,5 +892,5 @@ failed: if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); drm_connector_cleanup(connector); - kfree(connector); + kfree(intel_output); } -- cgit v1.2.3 From aa0261f230105b86409e29bbe851b09830d93d50 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 22 Jun 2009 15:31:26 +0800 Subject: drm/i915: Don't change the blank/sync width when calculating scaled modes Also, use the border instead of border minus one. At the same time, make sure the horizontal border and hsync are even for the LVDS that works in dual-channel mode. So both horizontal border and hsync start are also changed to be even, even for the LVDS in single-channel mode. https://bugs.freedesktop.org/show_bug.cgi?id=20951 Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 91 +++++++++++++++++++++++++++++++-------- 1 file changed, 73 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f416ead7120..9564ca44a97 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -246,6 +246,9 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, bool border = 0; int panel_ratio, desired_ratio, vert_scale, horiz_scale; int horiz_ratio, vert_ratio; + u32 hsync_width, vsync_width; + u32 hblank_width, vblank_width; + u32 hsync_pos, vsync_pos; /* Should never happen!! */ if (!IS_I965G(dev) && intel_crtc->pipe == 0) { @@ -306,6 +309,14 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) | PFIT_FILTER_FUZZY; + hsync_width = adjusted_mode->crtc_hsync_end - + adjusted_mode->crtc_hsync_start; + vsync_width = adjusted_mode->crtc_vsync_end - + adjusted_mode->crtc_vsync_start; + hblank_width = adjusted_mode->crtc_hblank_end - + adjusted_mode->crtc_hblank_start; + vblank_width = adjusted_mode->crtc_vblank_end - + adjusted_mode->crtc_vblank_start; /* * Deal with panel fitting options. Figure out how to stretch the * image based on its aspect ratio & the current panel fitting mode. @@ -339,23 +350,39 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, bottom_border++; /* Set active & border values */ adjusted_mode->crtc_hdisplay = mode->hdisplay; + /* Keep the boder be even */ + if (right_border & 1) + right_border++; + /* use the border directly instead of border minuse one */ adjusted_mode->crtc_hblank_start = mode->hdisplay + - right_border - 1; - adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal - - left_border - 1; + right_border; + /* keep the blank width constant */ + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_hblank_start + hblank_width; + /* get the hsync pos relative to hblank start */ + hsync_pos = (hblank_width - hsync_width) / 2; + /* keep the hsync pos be even */ + if (hsync_pos & 1) + hsync_pos++; adjusted_mode->crtc_hsync_start = - adjusted_mode->crtc_hblank_start; + adjusted_mode->crtc_hblank_start + hsync_pos; + /* keep the hsync width constant */ adjusted_mode->crtc_hsync_end = - adjusted_mode->crtc_hblank_end; + adjusted_mode->crtc_hsync_start + hsync_width; adjusted_mode->crtc_vdisplay = mode->vdisplay; + /* use the border instead of border minus one */ adjusted_mode->crtc_vblank_start = mode->vdisplay + - bottom_border - 1; - adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal - - top_border - 1; + bottom_border; + /* keep the vblank width constant */ + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vblank_start + vblank_width; + /* get the vsync start postion relative to vblank start */ + vsync_pos = (vblank_width - vsync_width) / 2; adjusted_mode->crtc_vsync_start = - adjusted_mode->crtc_vblank_start; + adjusted_mode->crtc_vblank_start + vsync_pos; + /* keep the vsync width constant */ adjusted_mode->crtc_vsync_end = - adjusted_mode->crtc_vblank_end; + adjusted_mode->crtc_vblank_start + vsync_width; border = 1; break; case DRM_MODE_SCALE_ASPECT: @@ -400,15 +427,32 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, right_border = left_border; if (mode->hdisplay & 1) /* odd resolutions */ right_border++; + /* keep the border be even */ + if (right_border & 1) + right_border++; adjusted_mode->crtc_hdisplay = scaled_width; + /* use border instead of border minus one */ adjusted_mode->crtc_hblank_start = - scaled_width + right_border - 1; + scaled_width + right_border; + /* keep the hblank width constant */ adjusted_mode->crtc_hblank_end = - adjusted_mode->crtc_htotal - left_border - 1; + adjusted_mode->crtc_hblank_start + + hblank_width; + /* + * get the hsync start pos relative to + * hblank start + */ + hsync_pos = (hblank_width - hsync_width) / 2; + /* keep the hsync_pos be even */ + if (hsync_pos & 1) + hsync_pos++; adjusted_mode->crtc_hsync_start = - adjusted_mode->crtc_hblank_start; + adjusted_mode->crtc_hblank_start + + hsync_pos; + /* keept hsync width constant */ adjusted_mode->crtc_hsync_end = - adjusted_mode->crtc_hblank_end; + adjusted_mode->crtc_hsync_start + + hsync_width; border = 1; } else if (panel_ratio < desired_ratio) { /* letter */ u32 scaled_height = mode->vdisplay * @@ -424,14 +468,25 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, if (mode->vdisplay & 1) bottom_border++; adjusted_mode->crtc_vdisplay = scaled_height; + /* use border instead of border minus one */ adjusted_mode->crtc_vblank_start = - scaled_height + bottom_border - 1; + scaled_height + bottom_border; + /* keep the vblank width constant */ adjusted_mode->crtc_vblank_end = - adjusted_mode->crtc_vtotal - top_border - 1; + adjusted_mode->crtc_vblank_start + + vblank_width; + /* + * get the vsync start pos relative to + * vblank start + */ + vsync_pos = (vblank_width - vsync_width) / 2; adjusted_mode->crtc_vsync_start = - adjusted_mode->crtc_vblank_start; + adjusted_mode->crtc_vblank_start + + vsync_pos; + /* keep the vsync width constant */ adjusted_mode->crtc_vsync_end = - adjusted_mode->crtc_vblank_end; + adjusted_mode->crtc_vsync_start + + vsync_width; border = 1; } else { /* Aspects match, Let hw scale both directions */ -- cgit v1.2.3 From cfd43c025ddef0b1c723bb9811d2bde52b285710 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Sat, 20 Jun 2009 00:31:28 +0200 Subject: drm/i915: Fix size_t handling in off-by-default debug printfs Signed-off-by: Krzysztof Halasa Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 6 +++--- drivers/gpu/drm/i915/i915_gem_debug.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index fd2b8bdffe3..8660b2144b2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1006,7 +1006,7 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); #if WATCH_BUF - DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", + DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n", obj, obj->size, read_domains, write_domain); #endif if (read_domains & I915_GEM_DOMAIN_GTT) { @@ -1050,7 +1050,7 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, } #if WATCH_BUF - DRM_INFO("%s: sw_finish %d (%p %d)\n", + DRM_INFO("%s: sw_finish %d (%p %zd)\n", __func__, args->handle, obj, obj->size); #endif obj_priv = obj->driver_private; @@ -2423,7 +2423,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) } #if WATCH_BUF - DRM_INFO("Binding object of size %d at 0x%08x\n", + DRM_INFO("Binding object of size %zd at 0x%08x\n", obj->size, obj_priv->gtt_offset); #endif ret = i915_gem_object_get_pages(obj); diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c index 8d0b943e2c5..f94b5985f73 100644 --- a/drivers/gpu/drm/i915/i915_gem_debug.c +++ b/drivers/gpu/drm/i915/i915_gem_debug.c @@ -143,7 +143,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle) uint32_t *backing_map = NULL; int bad_count = 0; - DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n", + DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n", __func__, obj, obj_priv->gtt_offset, handle, obj->size / 1024); -- cgit v1.2.3 From 921809a5831821eaf86e799c4b3d7c666ee352b1 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Fri, 19 Jun 2009 22:35:09 +0200 Subject: drm/i915: Catch up to obj_priv->page_list rename in disabled debug code. Signed-off-by: Krzysztof Halasa Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem_debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c index f94b5985f73..e602614bd3f 100644 --- a/drivers/gpu/drm/i915/i915_gem_debug.c +++ b/drivers/gpu/drm/i915/i915_gem_debug.c @@ -87,7 +87,7 @@ i915_gem_dump_object(struct drm_gem_object *obj, int len, chunk_len = page_len - chunk; if (chunk_len > 128) chunk_len = 128; - i915_gem_dump_page(obj_priv->page_list[page], + i915_gem_dump_page(obj_priv->pages[page], chunk, chunk + chunk_len, obj_priv->gtt_offset + page * PAGE_SIZE, @@ -157,7 +157,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle) for (page = 0; page < obj->size / PAGE_SIZE; page++) { int i; - backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0); + backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0); if (backing_map == NULL) { DRM_ERROR("failed to map backing page\n"); -- cgit v1.2.3 From 8ed9a5bc9c9425ef93a1b03b418300a5e18b2361 Mon Sep 17 00:00:00 2001 From: "ling.ma@intel.com" Date: Mon, 22 Jun 2009 22:08:35 +0800 Subject: drm/i915: set TV detection mode when tv is already connected We used load_detect_temp flag to determine whether to set tv to the test mode. However if the TV already has a mode set, we still need to set the test mode to determine connection. This results in blinking, but there is no other reliable way to determine TV connection. freedesktop.org bug #22035 Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_tv.c | 53 +++++++++++++++++++---------------------- 1 file changed, 25 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index ea68992e441..a43c98e3f07 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1383,34 +1383,31 @@ intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output) /* * Detect TV by polling) */ - if (intel_output->load_detect_temp) { - /* TV not currently running, prod it with destructive detect */ - save_tv_dac = tv_dac; - tv_ctl = I915_READ(TV_CTL); - save_tv_ctl = tv_ctl; - tv_ctl &= ~TV_ENC_ENABLE; - tv_ctl &= ~TV_TEST_MODE_MASK; - tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; - tv_dac &= ~TVDAC_SENSE_MASK; - tv_dac &= ~DAC_A_MASK; - tv_dac &= ~DAC_B_MASK; - tv_dac &= ~DAC_C_MASK; - tv_dac |= (TVDAC_STATE_CHG_EN | - TVDAC_A_SENSE_CTL | - TVDAC_B_SENSE_CTL | - TVDAC_C_SENSE_CTL | - DAC_CTL_OVERRIDE | - DAC_A_0_7_V | - DAC_B_0_7_V | - DAC_C_0_7_V); - I915_WRITE(TV_CTL, tv_ctl); - I915_WRITE(TV_DAC, tv_dac); - intel_wait_for_vblank(dev); - tv_dac = I915_READ(TV_DAC); - I915_WRITE(TV_DAC, save_tv_dac); - I915_WRITE(TV_CTL, save_tv_ctl); - intel_wait_for_vblank(dev); - } + save_tv_dac = tv_dac; + tv_ctl = I915_READ(TV_CTL); + save_tv_ctl = tv_ctl; + tv_ctl &= ~TV_ENC_ENABLE; + tv_ctl &= ~TV_TEST_MODE_MASK; + tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; + tv_dac &= ~TVDAC_SENSE_MASK; + tv_dac &= ~DAC_A_MASK; + tv_dac &= ~DAC_B_MASK; + tv_dac &= ~DAC_C_MASK; + tv_dac |= (TVDAC_STATE_CHG_EN | + TVDAC_A_SENSE_CTL | + TVDAC_B_SENSE_CTL | + TVDAC_C_SENSE_CTL | + DAC_CTL_OVERRIDE | + DAC_A_0_7_V | + DAC_B_0_7_V | + DAC_C_0_7_V); + I915_WRITE(TV_CTL, tv_ctl); + I915_WRITE(TV_DAC, tv_dac); + intel_wait_for_vblank(dev); + tv_dac = I915_READ(TV_DAC); + I915_WRITE(TV_DAC, save_tv_dac); + I915_WRITE(TV_CTL, save_tv_ctl); + intel_wait_for_vblank(dev); /* * A B C * 0 1 1 Composite -- cgit v1.2.3 From 1b16de0b070dc6fa29b7a99980eabe3325ee5983 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 22 Jun 2009 11:30:30 -0700 Subject: drm/i915: fix LFP data fetch Apparently the proper way to do this is to use the LFP data pointer block to figure out the LFP data block entry size, then use that plus the panel index to calculate an offset into the LFP data block array. Similar fix has already been pushed to the 2D driver to fix fdo bug applied to the VBIOS reader, and things look sane). Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_bios.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index cdd126d068a..716409a5724 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -99,9 +99,11 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, { struct bdb_lvds_options *lvds_options; struct bdb_lvds_lfp_data *lvds_lfp_data; + struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; struct bdb_lvds_lfp_data_entry *entry; struct lvds_dvo_timing *dvo_timing; struct drm_display_mode *panel_fixed_mode; + int lfp_data_size; /* Defaults if we can't find VBT info */ dev_priv->lvds_dither = 0; @@ -119,9 +121,17 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, if (!lvds_lfp_data) return; + lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS); + if (!lvds_lfp_data_ptrs) + return; + dev_priv->lvds_vbt = 1; - entry = &lvds_lfp_data->data[lvds_options->panel_type]; + lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - + lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; + entry = (struct bdb_lvds_lfp_data_entry *) + ((uint8_t *)lvds_lfp_data->data + (lfp_data_size * + lvds_options->panel_type)); dvo_timing = &entry->dvo_timing; panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); -- cgit v1.2.3 From 56d21b07d44e0a33ab846f4f08e9e33bd87e5d4b Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 17 Jun 2009 09:43:25 +0800 Subject: drm/i915: Fix HDMI regression introduced in new chipset support Remove wrongly added NULL_PACKETS_DURING_VSYNC setting for HDMI. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_hdmi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 3955476eb64..9e30daae37d 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -57,8 +57,7 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder, sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE | SDVO_VSYNC_ACTIVE_HIGH | - SDVO_HSYNC_ACTIVE_HIGH | - SDVO_NULL_PACKETS_DURING_VSYNC; + SDVO_HSYNC_ACTIVE_HIGH; if (hdmi_priv->has_hdmi_sink) sdvox |= SDVO_AUDIO_ENABLE; -- cgit v1.2.3 From b5aa8a0fc132dd512c33e7c2621d075e3b77a65e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Gr=C3=A9goire=20Henry?= Date: Tue, 23 Jun 2009 15:41:02 +0200 Subject: drm/i915: initialize fence registers to zero when loading GEM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Unitialized fence register could leads to corrupted display. Problem encountered on MacBooks (revision 1 and 2), directly booting from EFI or through BIOS emulation. (bug #21710 at freedestop.org) Signed-off-by: Grégoire Henry Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8660b2144b2..876b65cb762 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4227,6 +4227,7 @@ i915_gem_lastclose(struct drm_device *dev) void i915_gem_load(struct drm_device *dev) { + int i; drm_i915_private_t *dev_priv = dev->dev_private; spin_lock_init(&dev_priv->mm.active_list_lock); @@ -4246,6 +4247,18 @@ i915_gem_load(struct drm_device *dev) else dev_priv->num_fence_regs = 8; + /* Initialize fence registers to zero */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0); + } else { + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_830_0 + (i * 4), 0); + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_945_8 + (i * 4), 0); + } + i915_gem_detect_bit_6_swizzle(dev); } -- cgit v1.2.3 From b8389018212e8c4e03ede4df5405796100ef4390 Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Wed, 10 Jun 2009 12:48:48 -0700 Subject: leds: fix led-bd2802 errors while resuming LED_CORE_SUSPENDRESUME flag is not needed in the bd2802 driver, because all works for suspend/resume is done in bd2802_suspend and bd2802_suspend functions. And this patch allows bd2802 to be configured again when it resumes from suspend. Signed-off-by: Kim Kyuwon Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/leds-bd2802.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 4149ecb3a9b..6832b9fd042 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -538,7 +538,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1r.brightness = LED_OFF; led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness; led->cdev_led1r.blink_set = bd2802_set_led1r_blink; - led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1r); if (ret < 0) { @@ -551,7 +550,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1g.brightness = LED_OFF; led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness; led->cdev_led1g.blink_set = bd2802_set_led1g_blink; - led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1g); if (ret < 0) { @@ -564,7 +562,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1b.brightness = LED_OFF; led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness; led->cdev_led1b.blink_set = bd2802_set_led1b_blink; - led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1b); if (ret < 0) { @@ -577,7 +574,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led2r.brightness = LED_OFF; led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness; led->cdev_led2r.blink_set = bd2802_set_led2r_blink; - led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led2r); if (ret < 0) { @@ -590,7 +586,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led2g.brightness = LED_OFF; led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness; led->cdev_led2g.blink_set = bd2802_set_led2g_blink; - led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led2g); if (ret < 0) { @@ -723,8 +718,7 @@ static int bd2802_resume(struct i2c_client *client) struct bd2802_led *led = i2c_get_clientdata(client); if (!bd2802_is_all_off(led) || led->adf_on) { - gpio_set_value(led->pdata->reset_gpio, 1); - udelay(100); + bd2802_reset_cancel(led); bd2802_restore_state(led); } -- cgit v1.2.3 From 1b18cf413f63ff6de5ba3e5028e869c21322a4df Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Wed, 10 Jun 2009 12:48:50 -0700 Subject: leds: change the license information Change the license to 'GPL v2' Signed-off-by: Kim Kyuwon Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/leds-bd2802.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 6832b9fd042..7a03efd54f6 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -756,4 +756,4 @@ module_exit(bd2802_exit); MODULE_AUTHOR("Kim Kyuwon "); MODULE_DESCRIPTION("BD2802 LED driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 8792f7cf4368f9bc337eee65851d8e7abbbf946c Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Wed, 10 Jun 2009 12:48:50 -0700 Subject: leds: add the sysfs interface into the leds-bd2802 driver for changing wave pattern and led current. Allow the user application to change the wave pattern and led current by 'wave_pattern' and 'rgb_current' sysfs files. Signed-off-by: Kim Kyuwon Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/leds-bd2802.c | 86 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 73 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 7a03efd54f6..779d7f262c0 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -97,6 +97,10 @@ struct bd2802_led { enum led_ids led_id; enum led_colors color; enum led_bits state; + + /* General attributes of RGB LEDs */ + int wave_pattern; + int rgb_current; }; @@ -254,7 +258,7 @@ static void bd2802_set_on(struct bd2802_led *led, enum led_ids id, bd2802_reset_cancel(led); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); @@ -275,9 +279,9 @@ static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id, reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); - bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF); + bd2802_write_byte(led->client, reg, led->wave_pattern); bd2802_enable(led, id); bd2802_update_state(led, id, color, BD2802_BLINK); @@ -406,7 +410,7 @@ static void bd2802_enable_adv_conf(struct bd2802_led *led) ret = device_create_file(&led->client->dev, bd2802_addr_attributes[i]); if (ret) { - dev_err(&led->client->dev, "failed to sysfs file %s\n", + dev_err(&led->client->dev, "failed: sysfs file %s\n", bd2802_addr_attributes[i]->attr.name); goto failed_remove_files; } @@ -483,6 +487,52 @@ static struct device_attribute bd2802_adv_conf_attr = { .store = bd2802_store_adv_conf, }; +#define BD2802_CONTROL_ATTR(attr_name, name_str) \ +static ssize_t bd2802_show_##attr_name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + ssize_t ret; \ + down_read(&led->rwsem); \ + ret = sprintf(buf, "0x%02x\n", led->attr_name); \ + up_read(&led->rwsem); \ + return ret; \ +} \ +static ssize_t bd2802_store_##attr_name(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + unsigned long val; \ + int ret; \ + if (!count) \ + return -EINVAL; \ + ret = strict_strtoul(buf, 16, &val); \ + if (ret) \ + return ret; \ + down_write(&led->rwsem); \ + led->attr_name = val; \ + up_write(&led->rwsem); \ + return count; \ +} \ +static struct device_attribute bd2802_##attr_name##_attr = { \ + .attr = { \ + .name = name_str, \ + .mode = 0644, \ + .owner = THIS_MODULE \ + }, \ + .show = bd2802_show_##attr_name, \ + .store = bd2802_store_##attr_name, \ +}; + +BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern"); +BD2802_CONTROL_ATTR(rgb_current, "rgb_current"); + +static struct device_attribute *bd2802_attributes[] = { + &bd2802_adv_conf_attr, + &bd2802_wave_pattern_attr, + &bd2802_rgb_current_attr, +}; + static void bd2802_led_work(struct work_struct *work) { struct bd2802_led *led = container_of(work, struct bd2802_led, work); @@ -635,7 +685,7 @@ static int __devinit bd2802_probe(struct i2c_client *client, { struct bd2802_led *led; struct bd2802_led_platform_data *pdata; - int ret; + int ret, i; led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL); if (!led) { @@ -665,13 +715,20 @@ static int __devinit bd2802_probe(struct i2c_client *client, /* To save the power, reset BD2802 after detecting */ gpio_set_value(led->pdata->reset_gpio, 0); + /* Default attributes */ + led->wave_pattern = BD2802_PATTERN_HALF; + led->rgb_current = BD2802_CURRENT_032; + init_rwsem(&led->rwsem); - ret = device_create_file(&client->dev, &bd2802_adv_conf_attr); - if (ret) { - dev_err(&client->dev, "failed to create sysfs file %s\n", - bd2802_adv_conf_attr.attr.name); - goto failed_free; + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) { + ret = device_create_file(&led->client->dev, + bd2802_attributes[i]); + if (ret) { + dev_err(&led->client->dev, "failed: sysfs file %s\n", + bd2802_attributes[i]->attr.name); + goto failed_unregister_dev_file; + } } ret = bd2802_register_led_classdev(led); @@ -681,7 +738,8 @@ static int __devinit bd2802_probe(struct i2c_client *client, return 0; failed_unregister_dev_file: - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i--; i >= 0; i--) + device_remove_file(&led->client->dev, bd2802_attributes[i]); failed_free: i2c_set_clientdata(client, NULL); kfree(led); @@ -692,12 +750,14 @@ failed_free: static int __exit bd2802_remove(struct i2c_client *client) { struct bd2802_led *led = i2c_get_clientdata(client); + int i; - bd2802_unregister_led_classdev(led); gpio_set_value(led->pdata->reset_gpio, 0); + bd2802_unregister_led_classdev(led); if (led->adf_on) bd2802_disable_adv_conf(led); - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) + device_remove_file(&led->client->dev, bd2802_attributes[i]); i2c_set_clientdata(client, NULL); kfree(led); -- cgit v1.2.3 From 7fd02170e25b3b60fc21cd7b64bf1ed42e6a7cbe Mon Sep 17 00:00:00 2001 From: Zhenwen Xu Date: Wed, 10 Jun 2009 12:48:51 -0700 Subject: leds: leds-gpio - fix a section mismatch WARNING: drivers/leds/leds-gpio.o(.text+0x153): Section mismatch in reference from the function gpio_led_probe() to the function .devinit.text:create_gpio_led() The function gpio_led_probe() references the function __devinit create_gpio_led(). This is often because gpio_led_probe lacks a __devinit annotation or the annotation of create_gpio_led is wrong. Signed-off-by: Zhenwen Xu Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/leds-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index d2109054de8..76895e69104 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -129,7 +129,7 @@ static void delete_gpio_led(struct gpio_led_data *led) } #ifdef CONFIG_LEDS_GPIO_PLATFORM -static int gpio_led_probe(struct platform_device *pdev) +static int __devinit gpio_led_probe(struct platform_device *pdev) { struct gpio_led_platform_data *pdata = pdev->dev.platform_data; struct gpio_led_data *leds_data; -- cgit v1.2.3 From 2216c6e83ccbc9d34f541621ff23f510cd8a256f Mon Sep 17 00:00:00 2001 From: Tobias Mueller Date: Wed, 10 Jun 2009 12:48:52 -0700 Subject: leds: alix-leds2 fixed for Award BIOS Add initialisation of GPIO ports for compatibility with boards with Award BIOS (e.g. ALIX.3D3). Signed-off-by: Tobias Mueller Reviewed-by: Constantin Baranov Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 1 + drivers/leds/leds-alix2.c | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 9b60b6b684d..37e91184756 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -75,6 +75,7 @@ config LEDS_ALIX2 depends on LEDS_CLASS && X86 && EXPERIMENTAL help This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. + You have to set leds-alix2.force=1 for boards with Award BIOS. config LEDS_H1940 tristate "LED Support for iPAQ H1940 device" diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c index ddbd7730dfc..731d4eef342 100644 --- a/drivers/leds/leds-alix2.c +++ b/drivers/leds/leds-alix2.c @@ -14,7 +14,7 @@ static int force = 0; module_param(force, bool, 0444); -MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs"); +MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); struct alix_led { struct led_classdev cdev; @@ -155,6 +155,11 @@ static int __init alix_led_init(void) goto out; } + /* enable output on GPIO for LED 1,2,3 */ + outl(1 << 6, 0x6104); + outl(1 << 9, 0x6184); + outl(1 << 11, 0x6184); + pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { ret = platform_driver_probe(&alix_led_driver, alix_led_probe); -- cgit v1.2.3 From 34abdf252699ebc549fad54c1db481612f22a826 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Wed, 17 Jun 2009 13:05:27 +0100 Subject: leds: Remove an orphan Kconfig entry Remove an orphan Kconfig entry (LEDS_LP5521) Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 37e91184756..cfcd6bf831c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -146,16 +146,6 @@ config LEDS_GPIO_OF of_platform devices. For instance, LEDs which are listed in a "dts" file. -config LEDS_LP5521 - tristate "LED Support for the LP5521 LEDs" - depends on LEDS_CLASS && I2C - help - If you say 'Y' here you get support for the National Semiconductor - LP5521 LED driver used in n8x0 boards. - - This driver can be built as a module by choosing 'M'. The module - will be called leds-lp5521. - config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI -- cgit v1.2.3 From 07172d2bfa339d6c150d8cdd7c02128177feffbb Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Fri, 19 Jun 2009 13:53:07 +0200 Subject: leds: pca9532 - Indent using tabs, not spaces. Indent using tabs, not spaces. Signed-off-by: Antonio Ospite Acked-by: Riku Voipio Signed-off-by: Richard Purdie --- drivers/leds/leds-pca9532.c | 58 ++++++++++++++++++++++----------------------- 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index 3937244fdca..dba8921240f 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -35,7 +35,7 @@ struct pca9532_data { struct pca9532_led leds[16]; struct mutex update_lock; struct input_dev *idev; - struct work_struct work; + struct work_struct work; u8 pwm[2]; u8 psc[2]; }; @@ -87,14 +87,14 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink, if (b > 0xFF) return -EINVAL; data->pwm[pwm] = b; - data->psc[pwm] = blink; - return 0; + data->psc[pwm] = blink; + return 0; } static int pca9532_setpwm(struct i2c_client *client, int pwm) { - struct pca9532_data *data = i2c_get_clientdata(client); - mutex_lock(&data->update_lock); + struct pca9532_data *data = i2c_get_clientdata(client); + mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm), data->pwm[pwm]); i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm), @@ -132,11 +132,11 @@ static void pca9532_set_brightness(struct led_classdev *led_cdev, led->state = PCA9532_ON; else { led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */ - err = pca9532_calcpwm(led->client, 0, 0, value); + err = pca9532_calcpwm(led->client, 0, 0, value); if (err) return; /* XXX: led api doesn't allow error code? */ } - schedule_work(&led->work); + schedule_work(&led->work); } static int pca9532_set_blink(struct led_classdev *led_cdev, @@ -145,7 +145,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, struct pca9532_led *led = ldev_to_led(led_cdev); struct i2c_client *client = led->client; int psc; - int err = 0; + int err = 0; if (*delay_on == 0 && *delay_off == 0) { /* led subsystem ask us for a blink rate */ @@ -157,11 +157,11 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, /* Thecus specific: only use PSC/PWM 0 */ psc = (*delay_on * 152-1)/1000; - err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness); - if (err) - return err; - schedule_work(&led->work); - return 0; + err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness); + if (err) + return err; + schedule_work(&led->work); + return 0; } static int pca9532_event(struct input_dev *dev, unsigned int type, @@ -178,15 +178,15 @@ static int pca9532_event(struct input_dev *dev, unsigned int type, else data->pwm[1] = 0; - schedule_work(&data->work); + schedule_work(&data->work); - return 0; + return 0; } static void pca9532_input_work(struct work_struct *work) { - struct pca9532_data *data; - data = container_of(work, struct pca9532_data, work); + struct pca9532_data *data; + data = container_of(work, struct pca9532_data, work); mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1), data->pwm[1]); @@ -195,11 +195,11 @@ static void pca9532_input_work(struct work_struct *work) static void pca9532_led_work(struct work_struct *work) { - struct pca9532_led *led; - led = container_of(work, struct pca9532_led, work); - if (led->state == PCA9532_PWM0) - pca9532_setpwm(led->client, 0); - pca9532_setled(led); + struct pca9532_led *led; + led = container_of(work, struct pca9532_led, work); + if (led->state == PCA9532_PWM0) + pca9532_setpwm(led->client, 0); + pca9532_setled(led); } static int pca9532_configure(struct i2c_client *client, @@ -232,7 +232,7 @@ static int pca9532_configure(struct i2c_client *client, led->ldev.brightness = LED_OFF; led->ldev.brightness_set = pca9532_set_brightness; led->ldev.blink_set = pca9532_set_blink; - INIT_WORK(&led->work, pca9532_led_work); + INIT_WORK(&led->work, pca9532_led_work); err = led_classdev_register(&client->dev, &led->ldev); if (err < 0) { dev_err(&client->dev, @@ -262,11 +262,11 @@ static int pca9532_configure(struct i2c_client *client, BIT_MASK(SND_TONE); data->idev->event = pca9532_event; input_set_drvdata(data->idev, data); - INIT_WORK(&data->work, pca9532_input_work); + INIT_WORK(&data->work, pca9532_input_work); err = input_register_device(data->idev); if (err) { input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; goto exit; } @@ -283,13 +283,13 @@ exit: break; case PCA9532_TYPE_LED: led_classdev_unregister(&data->leds[i].ldev); - cancel_work_sync(&data->leds[i].work); + cancel_work_sync(&data->leds[i].work); break; case PCA9532_TYPE_N2100_BEEP: if (data->idev != NULL) { input_unregister_device(data->idev); input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; } break; @@ -340,13 +340,13 @@ static int pca9532_remove(struct i2c_client *client) break; case PCA9532_TYPE_LED: led_classdev_unregister(&data->leds[i].ldev); - cancel_work_sync(&data->leds[i].work); + cancel_work_sync(&data->leds[i].work); break; case PCA9532_TYPE_N2100_BEEP: if (data->idev != NULL) { input_unregister_device(data->idev); input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; } break; -- cgit v1.2.3 From 5054d39e327f76df022163a2ebd02e444c5d65f9 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Fri, 19 Jun 2009 13:55:42 +0200 Subject: leds: LED driver for National Semiconductor LP3944 Funlight Chip LEDs driver for National Semiconductor LP3944 Funlight Chip http://www.national.com/pf/LP/LP3944.html This helper chip can drive up to 8 leds, with two programmable DIM modes; it could even be used as a gpio expander but this driver assumes it is used as a led controller. The DIM modes are used to set _blink_ patterns for leds, the pattern is specified supplying two parameters: - period: from 0s to 1.6s - duty cycle: percentage of the period the led is on, from 0 to 100 LP3944 can be found on Motorola A910 smartphone, where it drives the rgb leds, the camera flash light and the displays backlights. Signed-off-by: Antonio Ospite Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 11 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-lp3944.c | 466 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 478 insertions(+) create mode 100644 drivers/leds/leds-lp3944.c (limited to 'drivers') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index cfcd6bf831c..7c8e7122aaa 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -146,6 +146,17 @@ config LEDS_GPIO_OF of_platform devices. For instance, LEDs which are listed in a "dts" file. +config LEDS_LP3944 + tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" + depends on LEDS_CLASS && I2C + help + This option enables support for LEDs connected to the National + Semiconductor LP3944 Lighting Management Unit (LMU) also known as + Fun Light Chip. + + To compile this driver as a module, choose M here: the + module will be called leds-lp3944. + config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 2d41c4dcf92..e8cdcf77a4c 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o +obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c new file mode 100644 index 00000000000..5946208ba26 --- /dev/null +++ b/drivers/leds/leds-lp3944.c @@ -0,0 +1,466 @@ +/* + * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip + * + * Copyright (C) 2009 Antonio Ospite + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* + * I2C driver for National Semiconductor LP3944 Funlight Chip + * http://www.national.com/pf/LP/LP3944.html + * + * This helper chip can drive up to 8 leds, with two programmable DIM modes; + * it could even be used as a gpio expander but this driver assumes it is used + * as a led controller. + * + * The DIM modes are used to set _blink_ patterns for leds, the pattern is + * specified supplying two parameters: + * - period: from 0s to 1.6s + * - duty cycle: percentage of the period the led is on, from 0 to 100 + * + * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb + * leds, the camera flash light and the displays backlights. + */ + +#include +#include +#include +#include +#include +#include + +/* Read Only Registers */ +#define LP3944_REG_INPUT1 0x00 /* LEDs 0-7 InputRegister (Read Only) */ +#define LP3944_REG_REGISTER1 0x01 /* None (Read Only) */ + +#define LP3944_REG_PSC0 0x02 /* Frequency Prescaler 0 (R/W) */ +#define LP3944_REG_PWM0 0x03 /* PWM Register 0 (R/W) */ +#define LP3944_REG_PSC1 0x04 /* Frequency Prescaler 1 (R/W) */ +#define LP3944_REG_PWM1 0x05 /* PWM Register 1 (R/W) */ +#define LP3944_REG_LS0 0x06 /* LEDs 0-3 Selector (R/W) */ +#define LP3944_REG_LS1 0x07 /* LEDs 4-7 Selector (R/W) */ + +/* These registers are not used to control leds in LP3944, they can store + * arbitrary values which the chip will ignore. + */ +#define LP3944_REG_REGISTER8 0x08 +#define LP3944_REG_REGISTER9 0x09 + +#define LP3944_DIM0 0 +#define LP3944_DIM1 1 + +/* period in ms */ +#define LP3944_PERIOD_MIN 0 +#define LP3944_PERIOD_MAX 1600 + +/* duty cycle is a percentage */ +#define LP3944_DUTY_CYCLE_MIN 0 +#define LP3944_DUTY_CYCLE_MAX 100 + +#define ldev_to_led(c) container_of(c, struct lp3944_led_data, ldev) + +/* Saved data */ +struct lp3944_led_data { + u8 id; + enum lp3944_type type; + enum lp3944_status status; + struct led_classdev ldev; + struct i2c_client *client; + struct work_struct work; +}; + +struct lp3944_data { + struct mutex lock; + struct i2c_client *client; + struct lp3944_led_data leds[LP3944_LEDS_MAX]; +}; + +static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value) +{ + int tmp; + + tmp = i2c_smbus_read_byte_data(client, reg); + if (tmp < 0) + return -EINVAL; + + *value = tmp; + + return 0; +} + +static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/** + * Set the period for DIM status + * + * @client: the i2c client + * @dim: either LP3944_DIM0 or LP3944_DIM1 + * @period: period of a blink, that is a on/off cycle, expressed in ms. + */ +static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period) +{ + u8 psc_reg; + u8 psc_value; + int err; + + if (dim == LP3944_DIM0) + psc_reg = LP3944_REG_PSC0; + else if (dim == LP3944_DIM1) + psc_reg = LP3944_REG_PSC1; + else + return -EINVAL; + + /* Convert period to Prescaler value */ + if (period > LP3944_PERIOD_MAX) + return -EINVAL; + + psc_value = (period * 255) / LP3944_PERIOD_MAX; + + err = lp3944_reg_write(client, psc_reg, psc_value); + + return err; +} + +/** + * Set the duty cycle for DIM status + * + * @client: the i2c client + * @dim: either LP3944_DIM0 or LP3944_DIM1 + * @duty_cycle: percentage of a period during which a led is ON + */ +static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim, + u8 duty_cycle) +{ + u8 pwm_reg; + u8 pwm_value; + int err; + + if (dim == LP3944_DIM0) + pwm_reg = LP3944_REG_PWM0; + else if (dim == LP3944_DIM1) + pwm_reg = LP3944_REG_PWM1; + else + return -EINVAL; + + /* Convert duty cycle to PWM value */ + if (duty_cycle > LP3944_DUTY_CYCLE_MAX) + return -EINVAL; + + pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX; + + err = lp3944_reg_write(client, pwm_reg, pwm_value); + + return err; +} + +/** + * Set the led status + * + * @led: a lp3944_led_data structure + * @status: one of LP3944_LED_STATUS_OFF + * LP3944_LED_STATUS_ON + * LP3944_LED_STATUS_DIM0 + * LP3944_LED_STATUS_DIM1 + */ +static int lp3944_led_set(struct lp3944_led_data *led, u8 status) +{ + struct lp3944_data *data = i2c_get_clientdata(led->client); + u8 id = led->id; + u8 reg; + u8 val = 0; + int err; + + dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n", + __func__, led->ldev.name, status); + + switch (id) { + case LP3944_LED0: + case LP3944_LED1: + case LP3944_LED2: + case LP3944_LED3: + reg = LP3944_REG_LS0; + break; + case LP3944_LED4: + case LP3944_LED5: + case LP3944_LED6: + case LP3944_LED7: + id -= LP3944_LED4; + reg = LP3944_REG_LS1; + break; + default: + return -EINVAL; + } + + if (status > LP3944_LED_STATUS_DIM1) + return -EINVAL; + + /* invert only 0 and 1, leave unchanged the other values, + * remember we are abusing status to set blink patterns + */ + if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2) + status = 1 - status; + + mutex_lock(&data->lock); + lp3944_reg_read(led->client, reg, &val); + + val &= ~(LP3944_LED_STATUS_MASK << (id << 1)); + val |= (status << (id << 1)); + + dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n", + __func__, led->ldev.name, reg, id, status, val); + + /* set led status */ + err = lp3944_reg_write(led->client, reg, val); + mutex_unlock(&data->lock); + + return err; +} + +static int lp3944_led_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct lp3944_led_data *led = ldev_to_led(led_cdev); + u16 period; + u8 duty_cycle; + int err; + + /* units are in ms */ + if (*delay_on + *delay_off > LP3944_PERIOD_MAX) + return -EINVAL; + + if (*delay_on == 0 && *delay_off == 0) { + /* Special case: the leds subsystem requires a default user + * friendly blink pattern for the LED. Let's blink the led + * slowly (1Hz). + */ + *delay_on = 500; + *delay_off = 500; + } + + period = (*delay_on) + (*delay_off); + + /* duty_cycle is the percentage of period during which the led is ON */ + duty_cycle = 100 * (*delay_on) / period; + + /* invert duty cycle for inverted leds, this has the same effect of + * swapping delay_on and delay_off + */ + if (led->type == LP3944_LED_TYPE_LED_INVERTED) + duty_cycle = 100 - duty_cycle; + + /* NOTE: using always the first DIM mode, this means that all leds + * will have the same blinking pattern. + * + * We could find a way later to have two leds blinking in hardware + * with different patterns at the same time, falling back to software + * control for the other ones. + */ + err = lp3944_dim_set_period(led->client, LP3944_DIM0, period); + if (err) + return err; + + err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle); + if (err) + return err; + + dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n", + __func__); + + led->status = LP3944_LED_STATUS_DIM0; + schedule_work(&led->work); + + return 0; +} + +static void lp3944_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct lp3944_led_data *led = ldev_to_led(led_cdev); + + dev_dbg(&led->client->dev, "%s: %s, %d\n", + __func__, led_cdev->name, brightness); + + led->status = brightness; + schedule_work(&led->work); +} + +static void lp3944_led_work(struct work_struct *work) +{ + struct lp3944_led_data *led; + + led = container_of(work, struct lp3944_led_data, work); + lp3944_led_set(led, led->status); +} + +static int lp3944_configure(struct i2c_client *client, + struct lp3944_data *data, + struct lp3944_platform_data *pdata) +{ + int i, err = 0; + + for (i = 0; i < pdata->leds_size; i++) { + struct lp3944_led *pled = &pdata->leds[i]; + struct lp3944_led_data *led = &data->leds[i]; + led->client = client; + led->id = i; + + switch (pled->type) { + + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led->type = pled->type; + led->status = pled->status; + led->ldev.name = pled->name; + led->ldev.max_brightness = 1; + led->ldev.brightness_set = lp3944_led_set_brightness; + led->ldev.blink_set = lp3944_led_set_blink; + led->ldev.flags = LED_CORE_SUSPENDRESUME; + + INIT_WORK(&led->work, lp3944_led_work); + err = led_classdev_register(&client->dev, &led->ldev); + if (err < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led->ldev.name); + goto exit; + } + + /* to expose the default value to userspace */ + led->ldev.brightness = led->status; + + /* Set the default led status */ + err = lp3944_led_set(led, led->status); + if (err < 0) { + dev_err(&client->dev, + "%s couldn't set STATUS %d\n", + led->ldev.name, led->status); + goto exit; + } + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + + } + } + return 0; + +exit: + if (i > 0) + for (i = i - 1; i >= 0; i--) + switch (pdata->leds[i].type) { + + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + } + + return err; +} + +static int __devinit lp3944_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data; + struct lp3944_data *data; + + if (lp3944_pdata == NULL) { + dev_err(&client->dev, "no platform data\n"); + return -EINVAL; + } + + /* Let's see whether this adapter can support what we need. */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "insufficient functionality!\n"); + return -ENODEV; + } + + data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + i2c_set_clientdata(client, data); + + mutex_init(&data->lock); + + dev_info(&client->dev, "lp3944 enabled\n"); + + lp3944_configure(client, data, lp3944_pdata); + return 0; +} + +static int __devexit lp3944_remove(struct i2c_client *client) +{ + struct lp3944_platform_data *pdata = client->dev.platform_data; + struct lp3944_data *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pdata->leds_size; i++) + switch (data->leds[i].type) { + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + } + + kfree(data); + i2c_set_clientdata(client, NULL); + + return 0; +} + +/* lp3944 i2c driver struct */ +static const struct i2c_device_id lp3944_id[] = { + {"lp3944", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lp3944_id); + +static struct i2c_driver lp3944_driver = { + .driver = { + .name = "lp3944", + }, + .probe = lp3944_probe, + .remove = __devexit_p(lp3944_remove), + .id_table = lp3944_id, +}; + +static int __init lp3944_module_init(void) +{ + return i2c_add_driver(&lp3944_driver); +} + +static void __exit lp3944_module_exit(void) +{ + i2c_del_driver(&lp3944_driver); +} + +module_init(lp3944_module_init); +module_exit(lp3944_module_exit); + +MODULE_AUTHOR("Antonio Ospite "); +MODULE_DESCRIPTION("LP3944 Fun Light Chip"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ed88bae6918fa990cbfe47316bd0f790121aaf00 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 12 May 2009 15:33:12 -0700 Subject: leds: Add options to have GPIO LEDs start on or keep their state There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho Acked-by: Grant Likely Acked-by: Wolfram Sang Acked-by: Sean MacLennan Signed-off-by: Richard Purdie --- drivers/leds/leds-gpio.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 76895e69104..6b06638eb5b 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -76,7 +76,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template, struct gpio_led_data *led_dat, struct device *parent, int (*blink_set)(unsigned, unsigned long *, unsigned long *)) { - int ret; + int ret, state; /* skip leds that aren't available */ if (!gpio_is_valid(template->gpio)) { @@ -99,11 +99,15 @@ static int __devinit create_gpio_led(const struct gpio_led *template, led_dat->cdev.blink_set = gpio_blink_set; } led_dat->cdev.brightness_set = gpio_led_set; - led_dat->cdev.brightness = LED_OFF; + if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) + state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low; + else + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; if (!template->retain_state_suspended) led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - ret = gpio_direction_output(led_dat->gpio, led_dat->active_low); + ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state); if (ret < 0) goto err; @@ -223,12 +227,22 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev, memset(&led, 0, sizeof(led)); for_each_child_of_node(np, child) { enum of_gpio_flags flags; + const char *state; led.gpio = of_get_gpio_flags(child, 0, &flags); led.active_low = flags & OF_GPIO_ACTIVE_LOW; led.name = of_get_property(child, "label", NULL) ? : child->name; led.default_trigger = of_get_property(child, "linux,default-trigger", NULL); + state = of_get_property(child, "default-state", NULL); + if (state) { + if (!strcmp(state, "keep")) + led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + else if(!strcmp(state, "on")) + led.default_state = LEDS_GPIO_DEFSTATE_ON; + else + led.default_state = LEDS_GPIO_DEFSTATE_OFF; + } ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++], &ofdev->dev, NULL); -- cgit v1.2.3 From 1d469c6c38c9deaa1836d2c1955330944719e4ef Mon Sep 17 00:00:00 2001 From: Aviv Laufer Date: Tue, 23 Jun 2009 16:28:36 +0300 Subject: backlight: Fix tdo24m crash on kmalloc There is a crash in tdo24m module caused by a call to kmalloc with the second parameter sizeof(flag) instead of flag. Signed-off-by: Aviv Laufer Signed-off-by: Richard Purdie --- drivers/video/backlight/tdo24m.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c index 1dae7f8f3c6..51422fc4f60 100644 --- a/drivers/video/backlight/tdo24m.c +++ b/drivers/video/backlight/tdo24m.c @@ -356,7 +356,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi) lcd->power = FB_BLANK_POWERDOWN; lcd->mode = MODE_VGA; /* default to VGA */ - lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL)); + lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL); if (lcd->buf == NULL) { kfree(lcd); return -ENOMEM; -- cgit v1.2.3 From f92e93eb5f4d56d73215f089580d53597bacd468 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 22 Jun 2009 18:15:58 +0200 Subject: drm/radeon: fix radeon kms framebuffer device smem.start is a physical address which kernel can remap to access video memory of the fb buffer. We now pin the fb buffer into vram by doing so we are loosing vram but fbdev need to be reworked to allow change in framebuffer address. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 4 ---- drivers/gpu/drm/radeon/radeon_fb.c | 27 +++++++++++++++++++-------- drivers/gpu/drm/radeon/radeon_object.c | 30 ------------------------------ 3 files changed, 19 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f30aa7274a5..3f48a57531b 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -496,7 +496,6 @@ int radeon_device_init(struct radeon_device *rdev, radeon_errata(rdev); /* Initialize scratch registers */ radeon_scratch_init(rdev); - /* TODO: disable VGA need to use VGA request */ /* BIOS*/ if (!radeon_get_bios(rdev)) { @@ -604,9 +603,6 @@ int radeon_device_init(struct radeon_device *rdev, if (r) { return r; } - if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) { - rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private; - } if (!ret) { DRM_INFO("radeon: kernel modesetting successfully initialized.\n"); } diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index fa86d398945..09987089193 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -478,14 +478,16 @@ int radeonfb_create(struct radeon_device *rdev, { struct fb_info *info; struct radeon_fb_device *rfbdev; - struct drm_framebuffer *fb; + struct drm_framebuffer *fb = NULL; struct radeon_framebuffer *rfb; struct drm_mode_fb_cmd mode_cmd; struct drm_gem_object *gobj = NULL; struct radeon_object *robj = NULL; struct device *device = &rdev->pdev->dev; int size, aligned_size, ret; + u64 fb_gpuaddr; void *fbptr = NULL; + unsigned long tmp; mode_cmd.width = surface_width; mode_cmd.height = surface_height; @@ -498,11 +500,12 @@ int radeonfb_create(struct radeon_device *rdev, aligned_size = ALIGN(size, PAGE_SIZE); ret = radeon_gem_object_create(rdev, aligned_size, 0, - RADEON_GEM_DOMAIN_VRAM, - false, ttm_bo_type_kernel, - false, &gobj); + RADEON_GEM_DOMAIN_VRAM, + false, ttm_bo_type_kernel, + false, &gobj); if (ret) { - printk(KERN_ERR "failed to allocate framebuffer\n"); + printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n", + surface_width, surface_height); ret = -ENOMEM; goto out; } @@ -515,12 +518,19 @@ int radeonfb_create(struct radeon_device *rdev, ret = -ENOMEM; goto out_unref; } + ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr); + if (ret) { + printk(KERN_ERR "failed to pin framebuffer\n"); + ret = -ENOMEM; + goto out_unref; + } list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list); rfb = to_radeon_framebuffer(fb); *rfb_p = rfb; rdev->fbdev_rfb = rfb; + rdev->fbdev_robj = robj; info = framebuffer_alloc(sizeof(struct radeon_fb_device), device); if (info == NULL) { @@ -546,8 +556,8 @@ int radeonfb_create(struct radeon_device *rdev, info->flags = FBINFO_DEFAULT; info->fbops = &radeonfb_ops; info->fix.line_length = fb->pitch; - info->screen_base = fbptr; - info->fix.smem_start = (unsigned long)fbptr; + tmp = fb_gpuaddr - rdev->mc.vram_location; + info->fix.smem_start = rdev->mc.aper_base + tmp; info->fix.smem_len = size; info->screen_base = fbptr; info->screen_size = size; @@ -644,7 +654,7 @@ out_unref: if (robj) { radeon_object_kunmap(robj); } - if (ret) { + if (fb && ret) { list_del(&fb->filp_head); drm_gem_object_unreference(gobj); drm_framebuffer_cleanup(fb); @@ -813,6 +823,7 @@ int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb) robj = rfb->obj->driver_private; unregister_framebuffer(info); radeon_object_kunmap(robj); + radeon_object_unpin(robj); framebuffer_release(info); } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 983e8df5e00..bac0d06c52a 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -223,7 +223,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, { uint32_t flags; uint32_t tmp; - void *fbptr; int r; flags = radeon_object_flags_from_domain(domain); @@ -242,10 +241,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, DRM_ERROR("radeon: failed to reserve object for pinning it.\n"); return r; } - if (robj->rdev->fbdev_robj == robj) { - mutex_lock(&robj->rdev->fbdev_info->lock); - radeon_object_kunmap(robj); - } tmp = robj->tobj.mem.placement; ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM); robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING; @@ -261,23 +256,12 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, DRM_ERROR("radeon: failed to pin object.\n"); } radeon_object_unreserve(robj); - if (robj->rdev->fbdev_robj == robj) { - if (!r) { - r = radeon_object_kmap(robj, &fbptr); - } - if (!r) { - robj->rdev->fbdev_info->screen_base = fbptr; - robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr; - } - mutex_unlock(&robj->rdev->fbdev_info->lock); - } return r; } void radeon_object_unpin(struct radeon_object *robj) { uint32_t flags; - void *fbptr; int r; spin_lock(&robj->tobj.lock); @@ -297,10 +281,6 @@ void radeon_object_unpin(struct radeon_object *robj) DRM_ERROR("radeon: failed to reserve object for unpinning it.\n"); return; } - if (robj->rdev->fbdev_robj == robj) { - mutex_lock(&robj->rdev->fbdev_info->lock); - radeon_object_kunmap(robj); - } flags = robj->tobj.mem.placement; robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT; r = ttm_buffer_object_validate(&robj->tobj, @@ -310,16 +290,6 @@ void radeon_object_unpin(struct radeon_object *robj) DRM_ERROR("radeon: failed to unpin buffer.\n"); } radeon_object_unreserve(robj); - if (robj->rdev->fbdev_robj == robj) { - if (!r) { - r = radeon_object_kmap(robj, &fbptr); - } - if (!r) { - robj->rdev->fbdev_info->screen_base = fbptr; - robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr; - } - mutex_unlock(&robj->rdev->fbdev_info->lock); - } } int radeon_object_wait(struct radeon_object *robj) -- cgit v1.2.3 From 696d4df1dbfe0b054e94c1990b49c1727ffc1ff0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 23 Jun 2009 16:12:53 +0200 Subject: drm/radeon: Don't initialize acceleration related fields of struct fb_info. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Might lure userspace into trying silly things otherwise. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 09987089193..9e8f191eb64 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -551,7 +551,7 @@ int radeonfb_create(struct radeon_device *rdev, info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ info->fix.ywrapstep = 0; - info->fix.accel = FB_ACCEL_I830; + info->fix.accel = FB_ACCEL_NONE; info->fix.type_aux = 0; info->flags = FBINFO_DEFAULT; info->fbops = &radeonfb_ops; @@ -572,8 +572,8 @@ int radeonfb_create(struct radeon_device *rdev, info->var.width = -1; info->var.xres = fb_width; info->var.yres = fb_height; - info->fix.mmio_start = pci_resource_start(rdev->pdev, 2); - info->fix.mmio_len = pci_resource_len(rdev->pdev, 2); + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; info->pixmap.size = 64*1024; info->pixmap.buf_align = 8; info->pixmap.access_align = 32; -- cgit v1.2.3 From b1e3a6d1c4d0ac75ad8289bcfd69efcc9b1bc6e5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 23 Jun 2009 16:12:54 +0200 Subject: drm/radeon: Clear surface registers at initialization time. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some PowerMac firmwares set up a tiling surface at the beginning of VRAM which messes us up otherwise. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 3f48a57531b..f97563db4e5 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -34,6 +34,23 @@ #include "radeon_asic.h" #include "atom.h" +/* + * Clear GPU surface registers. + */ +static void radeon_surface_init(struct radeon_device *rdev) +{ + /* FIXME: check this out */ + if (rdev->family < CHIP_R600) { + int i; + + for (i = 0; i < 8; i++) { + WREG32(RADEON_SURFACE0_INFO + + i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO), + 0); + } + } +} + /* * GPU scratch registers helpers function. */ @@ -496,6 +513,9 @@ int radeon_device_init(struct radeon_device *rdev, radeon_errata(rdev); /* Initialize scratch registers */ radeon_scratch_init(rdev); + /* Initialize surface registers */ + radeon_surface_init(rdev); + /* TODO: disable VGA need to use VGA request */ /* BIOS*/ if (!radeon_get_bios(rdev)) { -- cgit v1.2.3 From e14cbee401cd00779a5267128371506b22c77bc9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 23 Jun 2009 12:36:32 +0200 Subject: drm: Fix shifts which were miscalculated when converting from bitfields. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like I managed to mess up most shifts when converting from bitfields. :( The patch below works on my Thinkpad T500 (as well as on my PowerBook, where the previous change worked as well, maybe out of luck...). I'd appreciate more testing and eyes looking over it though. Signed-off-by: Michel Dänzer Tested-by: Michael Pyne Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 7d0835226f6..80cc6d06d61 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -294,10 +294,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo; unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo; unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo; - unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo; - unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo; - unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf); - unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4; + unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo; + unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo; + unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4; + unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf); /* ignore tiny modes */ if (hactive < 64 || vactive < 64) @@ -347,8 +347,8 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC; - mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8; - mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4; + mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4; + mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8; if (quirks & EDID_QUIRK_DETAILED_IN_CM) { mode->width_mm *= 10; -- cgit v1.2.3 From 176f613e60b63f2d77e6c69f036cfc754f3aaac6 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 22 Jun 2009 18:16:13 +0200 Subject: drm/radeon: fix driver initialization order so radeon kms can be builtin TTM need to be initialized before radeon if KMS is enabled otherwise the kernel will crash hard. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/radeon/radeon_drv.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4e89ab08b7b..fe23f29f7cb 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -16,6 +16,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm-$(CONFIG_COMPAT) += drm_ioc32.o obj-$(CONFIG_DRM) += drm.o +obj-$(CONFIG_DRM_TTM) += ttm/ obj-$(CONFIG_DRM_TDFX) += tdfx/ obj-$(CONFIG_DRM_R128) += r128/ obj-$(CONFIG_DRM_RADEON)+= radeon/ @@ -26,4 +27,3 @@ obj-$(CONFIG_DRM_I915) += i915/ obj-$(CONFIG_DRM_SIS) += sis/ obj-$(CONFIG_DRM_SAVAGE)+= savage/ obj-$(CONFIG_DRM_VIA) +=via/ -obj-$(CONFIG_DRM_TTM) += ttm/ diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 09c9fb9f621..84ba69f4878 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -345,7 +345,7 @@ static void __exit radeon_exit(void) drm_exit(driver); } -late_initcall(radeon_init); +module_init(radeon_init); module_exit(radeon_exit); MODULE_AUTHOR(DRIVER_AUTHOR); -- cgit v1.2.3 From 8b169b5f1f46da8ece1ce7304cda7155fffe3892 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Wed, 24 Jun 2009 16:31:50 +1000 Subject: drm: remove unused #include 's Remove unused #include ('s) in drivers/gpu/drm/ttm/ttm_bo_util.c drivers/gpu/drm/ttm/ttm_bo_vm.c drivers/gpu/drm/ttm/ttm_tt.c Signed-off-by: Huang Weiyi Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_util.c | 1 - drivers/gpu/drm/ttm/ttm_bo_vm.c | 1 - drivers/gpu/drm/ttm/ttm_tt.c | 1 - 3 files changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index 517c8455963..bdec583901e 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -34,7 +34,6 @@ #include #include #include -#include #include void ttm_bo_free_old_node(struct ttm_buffer_object *bo) diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c index 27b146c54fb..40b75032ea4 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_vm.c +++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 0331fa74cd3..75dc8bd2459 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -28,7 +28,6 @@ * Authors: Thomas Hellstrom */ -#include #include #include #include -- cgit v1.2.3 From ffc36c7610731115c77700dcc53901920361c235 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 03:43:00 -0700 Subject: ide: fix handling of unexpected IRQs vs request_irq() Add ide_host_enable_irqs() helper and use it in ide_host_register() before registering ports. Then remove no longer needed IRQ unmasking from in init_irq(). This should fix the problem with "screaming" shared IRQ on the first port (after request_irq() call while we have the unexpected IRQ pending on the second port) which was uncovered by my rework of the serialized interfaces support. Reported-by: Frans Pop Tested-by: Frans Pop Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-probe.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 51af4eea0d3..1bb106f6221 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -818,6 +818,24 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) return j; } +static void ide_host_enable_irqs(struct ide_host *host) +{ + ide_hwif_t *hwif; + int i; + + ide_host_for_each_port(i, hwif, host) { + if (hwif == NULL) + continue; + + /* clear any pending IRQs */ + hwif->tp_ops->read_status(hwif); + + /* unmask IRQs */ + if (hwif->io_ports.ctl_addr) + hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + } +} + /* * This routine sets up the IRQ for an IDE interface. */ @@ -831,9 +849,6 @@ static int init_irq (ide_hwif_t *hwif) if (irq_handler == NULL) irq_handler = ide_intr; - if (io_ports->ctl_addr) - hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) goto out_up; @@ -1404,6 +1419,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_port_tune_devices(hwif); } + ide_host_enable_irqs(host); + ide_host_for_each_port(i, hwif, host) { if (hwif == NULL) continue; -- cgit v1.2.3 From af054ed0018f0a69f8ea6f7546cbf34385edf13b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 23 Jun 2009 16:01:06 -0700 Subject: ide-cd: Don't warn on bogus block size unless it actually matters. Frans Pop reported that his CDROM drive reports a blocksize of 2352, and this causes new warnings due to commit e8e7b9eb11c34ee18bde8b7011af41938d1ad667 ("ide-cd: fix oops when using growisofs"). What we're trying to do is make sure that "blocklen >> SECTOR_BITS" is something the block layer won't choke on. And for Frans' case "2352 >> SECTOR_BITS" is equal to "2048 >> SECTOR_BITS", and thats "4". So warning in this case gives no real benefit. Reported-by: Frans Pop Tested-by: Frans Pop Signed-off-by: David S. Miller --- drivers/ide/ide-cd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 4a19686fcfe..a9a1bfb14e7 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -876,9 +876,12 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, return stat; /* - * Sanity check the given block size + * Sanity check the given block size, in so far as making + * sure the sectors_per_frame we give to the caller won't + * end up being bogus. */ blocklen = be32_to_cpu(capbuf.blocklen); + blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS; switch (blocklen) { case 512: case 1024: -- cgit v1.2.3 From d9ae62433e46909fc9e7d97ce74202c2851667b8 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Tue, 23 Jun 2009 16:02:58 -0700 Subject: ide-cd: Improve "weird block size" error message Currently the error gets repeated too frequently, for example each time HAL polls the device when a disc is present. Avoid that by using printk_once instead of printk. Also join the error and corrective action messages into a single line. Signed-off-by: Frans Pop Acked-by: Borislav Petkov Signed-off-by: David S. Miller --- drivers/ide/ide-cd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index a9a1bfb14e7..f0ede5953af 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -889,10 +889,9 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, case 4096: break; default: - printk(KERN_ERR PFX "%s: weird block size %u\n", + printk_once(KERN_ERR PFX "%s: weird block size %u; " + "setting default block size to 2048\n", drive->name, blocklen); - printk(KERN_ERR PFX "%s: default to 2kb block size\n", - drive->name); blocklen = 2048; break; } -- cgit v1.2.3 From 346c17a6cf60375323adfaa4b8a9d841049f890e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 22 Jun 2009 07:38:26 +0000 Subject: ide: relax DMA info validity checking There are some broken devices that report multiple DMA xfer modes enabled at once (ATA spec doesn't allow it) but otherwise work fine with DMA so just delete ide_id_dma_bug(). [ As discovered by detective work by Frans and Bart, due to how handling of the ID block was handled before commit c419993 ("ide-iops: only clear DMA words on setting DMA mode") this check was always seeing zeros in the fields or other similar garbage. Therefore this check wasn't actually checking anything. Now that the tests actually check the real bits, all we see are devices that trigger the check yet work perfectly fine, therefore killing this useless check is the best thing to do. -DaveM ] Reported-by: Frans Pop Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-dma.c | 21 --------------------- drivers/ide/ide-iops.c | 3 --- 2 files changed, 24 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 219e6fb78dc..ee58c88dee5 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -361,9 +361,6 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; - if (ide_id_dma_bug(drive)) - return 0; - if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -394,24 +391,6 @@ static int ide_dma_check(ide_drive_t *drive) return -1; } -int ide_id_dma_bug(ide_drive_t *drive) -{ - u16 *id = drive->id; - - if (id[ATA_ID_FIELD_VALID] & 4) { - if ((id[ATA_ID_UDMA_MODES] >> 8) && - (id[ATA_ID_MWDMA_MODES] >> 8)) - goto err_out; - } else if ((id[ATA_ID_MWDMA_MODES] >> 8) && - (id[ATA_ID_SWDMA_MODES] >> 8)) - goto err_out; - - return 0; -err_out: - printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); - return 1; -} - int ide_set_dma(ide_drive_t *drive) { int rc; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index fa047150a1c..917186ec496 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -329,9 +329,6 @@ int ide_driveid_update(ide_drive_t *drive) kfree(id); - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive)) - ide_dma_off(drive); - return 1; out_err: if (rc == 2) -- cgit v1.2.3 From ba9413bd284e79ea43b0ae406a7a29526aaf82b3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 16:11:10 -0700 Subject: ide: add QUANTUM FIREBALLct20 30 with firmware APL.090 to ivb_list[] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-iops.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 917186ec496..2892b242bbe 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -210,6 +210,7 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); */ static const struct drive_list_entry ivb_list[] = { { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, + { "QUANTUM FIREBALLlct20 30" , "APL.0900" }, { "TSSTcorp CDDVDW SH-S202J" , "SB00" }, { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, -- cgit v1.2.3 From a1317f714af7aed60ddc182d0122477cbe36ee9b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 23:52:17 -0700 Subject: ide: improve handling of Power Management requests Make hwif->rq point to PM request during PM sequence and do not allow any other types of requests to slip in (the old comment was never correct as there should be no such requests generated during PM sequence). Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-io.c | 54 +++++++++++++++++++++------------------------------- 1 file changed, 22 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1059f809b80..93b7886a2d6 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -476,10 +476,14 @@ void do_ide_request(struct request_queue *q) if (!ide_lock_port(hwif)) { ide_hwif_t *prev_port; - - WARN_ON_ONCE(hwif->rq); repeat: prev_port = hwif->host->cur_port; + + if (drive->dev_flags & IDE_DFLAG_BLOCKED) + rq = hwif->rq; + else + WARN_ON_ONCE(hwif->rq); + if (drive->dev_flags & IDE_DFLAG_SLEEPING && time_after(drive->sleep, jiffies)) { ide_unlock_port(hwif); @@ -506,43 +510,29 @@ repeat: hwif->cur_dev = drive; drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED); - spin_unlock_irq(&hwif->lock); - spin_lock_irq(q->queue_lock); - /* - * we know that the queue isn't empty, but this can happen - * if the q->prep_rq_fn() decides to kill a request - */ - if (!rq) + if (rq == NULL) { + spin_unlock_irq(&hwif->lock); + spin_lock_irq(q->queue_lock); + /* + * we know that the queue isn't empty, but this can + * happen if ->prep_rq_fn() decides to kill a request + */ rq = blk_fetch_request(drive->queue); + spin_unlock_irq(q->queue_lock); + spin_lock_irq(&hwif->lock); - spin_unlock_irq(q->queue_lock); - spin_lock_irq(&hwif->lock); - - if (!rq) { - ide_unlock_port(hwif); - goto out; + if (rq == NULL) { + ide_unlock_port(hwif); + goto out; + } } /* * Sanity: don't accept a request that isn't a PM request - * if we are currently power managed. This is very important as - * blk_stop_queue() doesn't prevent the blk_fetch_request() - * above to return us whatever is in the queue. Since we call - * ide_do_request() ourselves, we end up taking requests while - * the queue is blocked... - * - * We let requests forced at head of queue with ide-preempt - * though. I hope that doesn't happen too much, hopefully not - * unless the subdriver triggers such a thing in its own PM - * state machine. + * if we are currently power managed. */ - if ((drive->dev_flags & IDE_DFLAG_BLOCKED) && - blk_pm_request(rq) == 0 && - (rq->cmd_flags & REQ_PREEMPT) == 0) { - /* there should be no pending command at this point */ - ide_unlock_port(hwif); - goto plug_device; - } + BUG_ON((drive->dev_flags & IDE_DFLAG_BLOCKED) && + blk_pm_request(rq) == 0); hwif->rq = rq; -- cgit v1.2.3 From 2a13877c5ef3207a2a5c56250742e60808677f90 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 10 Apr 2009 07:50:45 -0400 Subject: osdblk: a Linux block device for OSD objects Submitted driver exports a block device of the form /dev/osdblkX, where X is a decimal number. It does that by mounting a stacking block device on top of an osd object. For example, if you create a 2G object on an OSD device, you can then use this module to present that 2G object as a Linux block device. See inside patch for exact documentation. [Sitting at linux-next helped fix proper Kconfig dependency for this driver, thanks to Randy Dunlap] Signed-off-by: Jeff Garzik Signed-off-by: Boaz Harrosh --- drivers/block/Kconfig | 16 ++ drivers/block/Makefile | 1 + drivers/block/osdblk.c | 694 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 711 insertions(+) create mode 100644 drivers/block/osdblk.c (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index bb72ada9f07..1d886e079c5 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -298,6 +298,22 @@ config BLK_DEV_NBD If unsure, say N. +config BLK_DEV_OSD + tristate "OSD object-as-blkdev support" + depends on SCSI_OSD_ULD + ---help--- + Saying Y or M here will allow the exporting of a single SCSI + OSD (object-based storage) object as a Linux block device. + + For example, if you create a 2G object on an OSD device, + you can then use this module to present that 2G object as + a Linux block device. + + To compile this driver as a module, choose M here: the + module will be called osdblk. + + If unsure, say N. + config BLK_DEV_SX8 tristate "Promise SATA SX8 support" depends on PCI diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 7755a5e2a85..cdaa3f8fddf 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_XILINX_SYSACE) += xsysace.o obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o obj-$(CONFIG_MG_DISK) += mg_disk.o obj-$(CONFIG_SUNVDC) += sunvdc.o +obj-$(CONFIG_BLK_DEV_OSD) += osdblk.o obj-$(CONFIG_BLK_DEV_UMEM) += umem.o obj-$(CONFIG_BLK_DEV_NBD) += nbd.o diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c new file mode 100644 index 00000000000..3565d0dd123 --- /dev/null +++ b/drivers/block/osdblk.c @@ -0,0 +1,694 @@ + +/* + osdblk.c -- Export a single SCSI OSD object as a Linux block device + + + Copyright 2009 Red Hat, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + + Instructions for use + -------------------- + + 1) Map a Linux block device to an existing OSD object. + + In this example, we will use partition id 1234, object id 5678, + OSD device /dev/osd1. + + $ echo "1234 5678 /dev/osd1" > /sys/class/osdblk/add + + + 2) List all active blkdev<->object mappings. + + In this example, we have performed step #1 twice, creating two blkdevs, + mapped to two separate OSD objects. + + $ cat /sys/class/osdblk/list + 0 174 1234 5678 /dev/osd1 + 1 179 1994 897123 /dev/osd0 + + The columns, in order, are: + - blkdev unique id + - blkdev assigned major + - OSD object partition id + - OSD object id + - OSD device + + + 3) Remove an active blkdev<->object mapping. + + In this example, we remove the mapping with blkdev unique id 1. + + $ echo 1 > /sys/class/osdblk/remove + + + NOTE: The actual creation and deletion of OSD objects is outside the scope + of this driver. + + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "osdblk" +#define PFX DRV_NAME ": " + +/* #define _OSDBLK_DEBUG */ +#ifdef _OSDBLK_DEBUG +#define OSDBLK_DEBUG(fmt, a...) \ + printk(KERN_NOTICE "osdblk @%s:%d: " fmt, __func__, __LINE__, ##a) +#else +#define OSDBLK_DEBUG(fmt, a...) \ + do { if (0) printk(fmt, ##a); } while (0) +#endif + +MODULE_AUTHOR("Jeff Garzik "); +MODULE_DESCRIPTION("block device inside an OSD object osdblk.ko"); +MODULE_LICENSE("GPL"); + +struct osdblk_device; + +enum { + OSDBLK_MINORS_PER_MAJOR = 256, /* max minors per blkdev */ + OSDBLK_MAX_REQ = 32, /* max parallel requests */ + OSDBLK_OP_TIMEOUT = 4 * 60, /* sync OSD req timeout */ +}; + +struct osdblk_request { + struct request *rq; /* blk layer request */ + struct bio *bio; /* cloned bio */ + struct osdblk_device *osdev; /* associated blkdev */ +}; + +struct osdblk_device { + int id; /* blkdev unique id */ + + int major; /* blkdev assigned major */ + struct gendisk *disk; /* blkdev's gendisk and rq */ + struct request_queue *q; + + struct osd_dev *osd; /* associated OSD */ + + char name[32]; /* blkdev name, e.g. osdblk34 */ + + spinlock_t lock; /* queue lock */ + + struct osd_obj_id obj; /* OSD partition, obj id */ + uint8_t obj_cred[OSD_CAP_LEN]; /* OSD cred */ + + struct osdblk_request req[OSDBLK_MAX_REQ]; /* request table */ + + struct list_head node; + + char osd_path[0]; /* OSD device path */ +}; + +static struct class *class_osdblk; /* /sys/class/osdblk */ +static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */ +static LIST_HEAD(osdblkdev_list); + +static struct block_device_operations osdblk_bd_ops = { + .owner = THIS_MODULE, +}; + +static const struct osd_attr g_attr_logical_length = ATTR_DEF( + OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8); + +static void osdblk_make_credential(u8 cred_a[OSD_CAP_LEN], + const struct osd_obj_id *obj) +{ + osd_sec_init_nosec_doall_caps(cred_a, obj, false, true); +} + +/* copied from exofs; move to libosd? */ +/* + * Perform a synchronous OSD operation. copied from exofs; move to libosd? + */ +static int osd_sync_op(struct osd_request *or, int timeout, uint8_t *credential) +{ + int ret; + + or->timeout = timeout; + ret = osd_finalize_request(or, 0, credential, NULL); + if (ret) + return ret; + + ret = osd_execute_request(or); + + /* osd_req_decode_sense(or, ret); */ + return ret; +} + +/* + * Perform an asynchronous OSD operation. copied from exofs; move to libosd? + */ +static int osd_async_op(struct osd_request *or, osd_req_done_fn *async_done, + void *caller_context, u8 *cred) +{ + int ret; + + ret = osd_finalize_request(or, 0, cred, NULL); + if (ret) + return ret; + + ret = osd_execute_request_async(or, async_done, caller_context); + + return ret; +} + +/* copied from exofs; move to libosd? */ +static int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr) +{ + struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */ + void *iter = NULL; + int nelem; + + do { + nelem = 1; + osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter); + if ((cur_attr.attr_page == attr->attr_page) && + (cur_attr.attr_id == attr->attr_id)) { + attr->len = cur_attr.len; + attr->val_ptr = cur_attr.val_ptr; + return 0; + } + } while (iter); + + return -EIO; +} + +static int osdblk_get_obj_size(struct osdblk_device *osdev, u64 *size_out) +{ + struct osd_request *or; + struct osd_attr attr; + int ret; + + /* start request */ + or = osd_start_request(osdev->osd, GFP_KERNEL); + if (!or) + return -ENOMEM; + + /* create a get-attributes(length) request */ + osd_req_get_attributes(or, &osdev->obj); + + osd_req_add_get_attr_list(or, &g_attr_logical_length, 1); + + /* execute op synchronously */ + ret = osd_sync_op(or, OSDBLK_OP_TIMEOUT, osdev->obj_cred); + if (ret) + goto out; + + /* extract length from returned attribute info */ + attr = g_attr_logical_length; + ret = extract_attr_from_req(or, &attr); + if (ret) + goto out; + + *size_out = get_unaligned_be64(attr.val_ptr); + +out: + osd_end_request(or); + return ret; + +} + +static void osdblk_osd_complete(struct osd_request *or, void *private) +{ + struct osdblk_request *orq = private; + struct osd_sense_info osi; + int ret = osd_req_decode_sense(or, &osi); + + if (ret) { + ret = -EIO; + OSDBLK_DEBUG("osdblk_osd_complete with err=%d\n", ret); + } + + /* complete OSD request */ + osd_end_request(or); + + /* complete request passed to osdblk by block layer */ + __blk_end_request_all(orq->rq, ret); +} + +static void bio_chain_put(struct bio *chain) +{ + struct bio *tmp; + + while (chain) { + tmp = chain; + chain = chain->bi_next; + + bio_put(tmp); + } +} + +static struct bio *bio_chain_clone(struct bio *old_chain, gfp_t gfpmask) +{ + struct bio *tmp, *new_chain = NULL, *tail = NULL; + + while (old_chain) { + tmp = bio_kmalloc(gfpmask, old_chain->bi_max_vecs); + if (!tmp) + goto err_out; + + __bio_clone(tmp, old_chain); + tmp->bi_bdev = NULL; + gfpmask &= ~__GFP_WAIT; + tmp->bi_next = NULL; + + if (!new_chain) + new_chain = tail = tmp; + else { + tail->bi_next = tmp; + tail = tmp; + } + + old_chain = old_chain->bi_next; + } + + return new_chain; + +err_out: + OSDBLK_DEBUG("bio_chain_clone with err\n"); + bio_chain_put(new_chain); + return NULL; +} + +static void osdblk_rq_fn(struct request_queue *q) +{ + struct osdblk_device *osdev = q->queuedata; + + while (1) { + struct request *rq; + struct osdblk_request *orq; + struct osd_request *or; + struct bio *bio; + bool do_write, do_flush; + + /* peek at request from block layer */ + rq = blk_fetch_request(q); + if (!rq) + break; + + /* filter out block requests we don't understand */ + if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) { + blk_end_request_all(rq, 0); + continue; + } + + /* deduce our operation (read, write, flush) */ + /* I wish the block layer simplified cmd_type/cmd_flags/cmd[] + * into a clearly defined set of RPC commands: + * read, write, flush, scsi command, power mgmt req, + * driver-specific, etc. + */ + + do_flush = (rq->special == (void *) 0xdeadbeefUL); + do_write = (rq_data_dir(rq) == WRITE); + + if (!do_flush) { /* osd_flush does not use a bio */ + /* a bio clone to be passed down to OSD request */ + bio = bio_chain_clone(rq->bio, GFP_ATOMIC); + if (!bio) + break; + } else + bio = NULL; + + /* alloc internal OSD request, for OSD command execution */ + or = osd_start_request(osdev->osd, GFP_ATOMIC); + if (!or) { + bio_chain_put(bio); + OSDBLK_DEBUG("osd_start_request with err\n"); + break; + } + + orq = &osdev->req[rq->tag]; + orq->rq = rq; + orq->bio = bio; + orq->osdev = osdev; + + /* init OSD command: flush, write or read */ + if (do_flush) + osd_req_flush_object(or, &osdev->obj, + OSD_CDB_FLUSH_ALL, 0, 0); + else if (do_write) + osd_req_write(or, &osdev->obj, blk_rq_pos(rq) * 512ULL, + bio, blk_rq_bytes(rq)); + else + osd_req_read(or, &osdev->obj, blk_rq_pos(rq) * 512ULL, + bio, blk_rq_bytes(rq)); + + OSDBLK_DEBUG("%s 0x%x bytes at 0x%llx\n", + do_flush ? "flush" : do_write ? + "write" : "read", blk_rq_bytes(rq), + blk_rq_pos(rq) * 512ULL); + + /* begin OSD command execution */ + if (osd_async_op(or, osdblk_osd_complete, orq, + osdev->obj_cred)) { + osd_end_request(or); + blk_requeue_request(q, rq); + bio_chain_put(bio); + OSDBLK_DEBUG("osd_execute_request_async with err\n"); + break; + } + + /* remove the special 'flush' marker, now that the command + * is executing + */ + rq->special = NULL; + } +} + +static void osdblk_prepare_flush(struct request_queue *q, struct request *rq) +{ + /* add driver-specific marker, to indicate that this request + * is a flush command + */ + rq->special = (void *) 0xdeadbeefUL; +} + +static void osdblk_free_disk(struct osdblk_device *osdev) +{ + struct gendisk *disk = osdev->disk; + + if (!disk) + return; + + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + if (disk->queue) + blk_cleanup_queue(disk->queue); + put_disk(disk); +} + +static int osdblk_init_disk(struct osdblk_device *osdev) +{ + struct gendisk *disk; + struct request_queue *q; + int rc; + u64 obj_size = 0; + + /* contact OSD, request size info about the object being mapped */ + rc = osdblk_get_obj_size(osdev, &obj_size); + if (rc) + return rc; + + /* create gendisk info */ + disk = alloc_disk(OSDBLK_MINORS_PER_MAJOR); + if (!disk) + return -ENOMEM; + + sprintf(disk->disk_name, DRV_NAME "%d", osdev->id); + disk->major = osdev->major; + disk->first_minor = 0; + disk->fops = &osdblk_bd_ops; + disk->private_data = osdev; + + /* init rq */ + q = blk_init_queue(osdblk_rq_fn, &osdev->lock); + if (!q) { + put_disk(disk); + return -ENOMEM; + } + + /* switch queue to TCQ mode; allocate tag map */ + rc = blk_queue_init_tags(q, OSDBLK_MAX_REQ, NULL); + if (rc) { + blk_cleanup_queue(q); + put_disk(disk); + return rc; + } + + blk_queue_prep_rq(q, blk_queue_start_tag); + blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush); + + disk->queue = q; + + q->queuedata = osdev; + + osdev->disk = disk; + osdev->q = q; + + /* finally, announce the disk to the world */ + set_capacity(disk, obj_size / 512ULL); + add_disk(disk); + + printk(KERN_INFO "%s: Added of size 0x%llx\n", + disk->disk_name, (unsigned long long)obj_size); + + return 0; +} + +/******************************************************************** + * /sys/class/osdblk/ + * add map OSD object to blkdev + * remove unmap OSD object + * list show mappings + *******************************************************************/ + +static void class_osdblk_release(struct class *cls) +{ + kfree(cls); +} + +static ssize_t class_osdblk_list(struct class *c, char *data) +{ + int n = 0; + struct list_head *tmp; + + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + struct osdblk_device *osdev; + + osdev = list_entry(tmp, struct osdblk_device, node); + + n += sprintf(data+n, "%d %d %llu %llu %s\n", + osdev->id, + osdev->major, + osdev->obj.partition, + osdev->obj.id, + osdev->osd_path); + } + + mutex_unlock(&ctl_mutex); + return n; +} + +static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count) +{ + struct osdblk_device *osdev; + ssize_t rc; + int irc, new_id = 0; + struct list_head *tmp; + + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + /* new osdblk_device object */ + osdev = kzalloc(sizeof(*osdev) + strlen(buf) + 1, GFP_KERNEL); + if (!osdev) { + rc = -ENOMEM; + goto err_out_mod; + } + + /* static osdblk_device initialization */ + spin_lock_init(&osdev->lock); + INIT_LIST_HEAD(&osdev->node); + + /* generate unique id: find highest unique id, add one */ + + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + struct osdblk_device *osdev; + + osdev = list_entry(tmp, struct osdblk_device, node); + if (osdev->id > new_id) + new_id = osdev->id + 1; + } + + osdev->id = new_id; + + /* add to global list */ + list_add_tail(&osdev->node, &osdblkdev_list); + + mutex_unlock(&ctl_mutex); + + /* parse add command */ + if (sscanf(buf, "%llu %llu %s", &osdev->obj.partition, &osdev->obj.id, + osdev->osd_path) != 3) { + rc = -EINVAL; + goto err_out_slot; + } + + /* initialize rest of new object */ + sprintf(osdev->name, DRV_NAME "%d", osdev->id); + + /* contact requested OSD */ + osdev->osd = osduld_path_lookup(osdev->osd_path); + if (IS_ERR(osdev->osd)) { + rc = PTR_ERR(osdev->osd); + goto err_out_slot; + } + + /* build OSD credential */ + osdblk_make_credential(osdev->obj_cred, &osdev->obj); + + /* register our block device */ + irc = register_blkdev(0, osdev->name); + if (irc < 0) { + rc = irc; + goto err_out_osd; + } + + osdev->major = irc; + + /* set up and announce blkdev mapping */ + rc = osdblk_init_disk(osdev); + if (rc) + goto err_out_blkdev; + + return count; + +err_out_blkdev: + unregister_blkdev(osdev->major, osdev->name); +err_out_osd: + osduld_put_device(osdev->osd); +err_out_slot: + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + list_del_init(&osdev->node); + mutex_unlock(&ctl_mutex); + + kfree(osdev); +err_out_mod: + OSDBLK_DEBUG("Error adding device %s\n", buf); + module_put(THIS_MODULE); + return rc; +} + +static ssize_t class_osdblk_remove(struct class *c, const char *buf, + size_t count) +{ + struct osdblk_device *osdev = NULL; + int target_id, rc; + unsigned long ul; + struct list_head *tmp; + + rc = strict_strtoul(buf, 10, &ul); + if (rc) + return rc; + + /* convert to int; abort if we lost anything in the conversion */ + target_id = (int) ul; + if (target_id != ul) + return -EINVAL; + + /* remove object from list immediately */ + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + osdev = list_entry(tmp, struct osdblk_device, node); + if (osdev->id == target_id) { + list_del_init(&osdev->node); + break; + } + osdev = NULL; + } + + mutex_unlock(&ctl_mutex); + + if (!osdev) + return -ENOENT; + + /* clean up and free blkdev and associated OSD connection */ + osdblk_free_disk(osdev); + unregister_blkdev(osdev->major, osdev->name); + osduld_put_device(osdev->osd); + kfree(osdev); + + /* release module ref */ + module_put(THIS_MODULE); + + return count; +} + +static struct class_attribute class_osdblk_attrs[] = { + __ATTR(add, 0200, NULL, class_osdblk_add), + __ATTR(remove, 0200, NULL, class_osdblk_remove), + __ATTR(list, 0444, class_osdblk_list, NULL), + __ATTR_NULL +}; + +static int osdblk_sysfs_init(void) +{ + int ret = 0; + + /* + * create control files in sysfs + * /sys/class/osdblk/... + */ + class_osdblk = kzalloc(sizeof(*class_osdblk), GFP_KERNEL); + if (!class_osdblk) + return -ENOMEM; + + class_osdblk->name = DRV_NAME; + class_osdblk->owner = THIS_MODULE; + class_osdblk->class_release = class_osdblk_release; + class_osdblk->class_attrs = class_osdblk_attrs; + + ret = class_register(class_osdblk); + if (ret) { + kfree(class_osdblk); + class_osdblk = NULL; + printk(PFX "failed to create class osdblk\n"); + return ret; + } + + return 0; +} + +static void osdblk_sysfs_cleanup(void) +{ + if (class_osdblk) + class_destroy(class_osdblk); + class_osdblk = NULL; +} + +static int __init osdblk_init(void) +{ + int rc; + + rc = osdblk_sysfs_init(); + if (rc) + return rc; + + return 0; +} + +static void __exit osdblk_exit(void) +{ + osdblk_sysfs_cleanup(); +} + +module_init(osdblk_init); +module_exit(osdblk_exit); + -- cgit v1.2.3 From bc47df0fa705887242c26c7b040e7cf0170ab1f1 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 20 May 2009 18:50:34 +0300 Subject: osdblk: Adjust queue limits to lower device's limits call blk_queue_stack_limits() to copy queue limits from the underline osd scsi_device. This is absolutely needed because osdblk cannot sleep when allocating a lower-request and therefore cannot be bouncing. TODO: Dynamic changes of limits to the lower device queue will not reflect in the upper driver Signed-off-by: Boaz Harrosh --- drivers/block/osdblk.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c index 3565d0dd123..13c1aee6aa3 100644 --- a/drivers/block/osdblk.c +++ b/drivers/block/osdblk.c @@ -66,6 +66,7 @@ #include #include #include +#include #define DRV_NAME "osdblk" #define PFX DRV_NAME ": " @@ -437,6 +438,12 @@ static int osdblk_init_disk(struct osdblk_device *osdev) return rc; } + /* Set our limits to the lower device limits, because osdblk cannot + * sleep when allocating a lower-request and therefore cannot be + * bouncing. + */ + blk_queue_stack_limits(q, osd_request_queue(osdev->osd)); + blk_queue_prep_rq(q, blk_queue_start_tag); blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush); -- cgit v1.2.3 From d7e2f36d9a92284754ed5254562766cb3d61c7ca Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 24 Jun 2009 02:36:17 -0700 Subject: ide cs5520: Initialize second port's interrupt number. In 86ccf37c6acd74cf7e4b7751ee045de19943c5a0 the driver was modified to deal with the removal of the pciirq argument to ide_pci_setup_ports(). But in the conversion only the first port's IRQ gets setup. Inspired by a patch by Bartlomiej Zolnierkiewicz., and with help from Alan Cox. Signed-off-by: David S. Miller --- drivers/ide/cs5520.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index bd066bb9d61..09f98ed0731 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -135,6 +135,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); hw[0].irq = 14; + hw[1].irq = 15; return ide_host_add(d, hws, 2, NULL); } -- cgit v1.2.3 From 6f4b67b8ff707147e14ee71045ab25aa286520f2 Mon Sep 17 00:00:00 2001 From: Shin-ichiro KAWASAKI Date: Sun, 21 Jun 2009 10:56:22 +0000 Subject: clocksource: sh_tmu: Make undefined TCOR behaviour less undefined. Avoid undocumented vague TMU behavior when zero value is set to TCOR. This primarily fixes up issues encountered under qemu with a zero-length period, while the hardware itself is fairly ambivalent one way or the other. Signed-off-by: Shin-ichiro KAWASAKI Acked-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_tmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 9ffb05f4095..93c2322feab 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -161,7 +161,7 @@ static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, if (periodic) sh_tmu_write(p, TCOR, delta); else - sh_tmu_write(p, TCOR, 0); + sh_tmu_write(p, TCOR, 0xffffffff); sh_tmu_write(p, TCNT, delta); -- cgit v1.2.3 From 17659c60629618c0aa67eb3cb6a77d2c52486d2e Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 24 Jun 2009 15:35:15 +0100 Subject: mtd: maps: Remove BUS_ID_SIZE from integrator_flash Signed-off-by: David Woodhouse Tested-by: Catalin Marinas --- drivers/mtd/maps/integrator-flash.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index b08a798ee25..2aac41bde8b 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c @@ -42,10 +42,8 @@ #include #include -#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2) - struct armflash_subdev_info { - char name[SUBDEV_NAME_SIZE]; + char *name; struct mtd_info *mtd; struct map_info map; struct flash_platform_data *plat; @@ -134,6 +132,8 @@ static void armflash_subdev_remove(struct armflash_subdev_info *subdev) map_destroy(subdev->mtd); if (subdev->map.virt) iounmap(subdev->map.virt); + kfree(subdev->name); + subdev->name = NULL; release_mem_region(subdev->map.phys, subdev->map.size); } @@ -177,16 +177,22 @@ static int armflash_probe(struct platform_device *dev) if (nr == 1) /* No MTD concatenation, just use the default name */ - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s", - dev_name(&dev->dev)); + subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL); else - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d", - dev_name(&dev->dev), i); + subdev->name = kasprintf(GFP_KERNEL, "%s-%d", + dev_name(&dev->dev), i); + if (!subdev->name) { + err = -ENOMEM; + break; + } subdev->plat = plat; err = armflash_subdev_probe(subdev, res); - if (err) + if (err) { + kfree(subdev->name); + subdev->name = NULL; break; + } } info->nr_subdev = i; -- cgit v1.2.3 From 342ba1039ad7cf464c7927ddf1ddc10d48a3716b Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 24 Jun 2009 18:39:09 -0300 Subject: mtd: cmdlineparts: Use 64-bit format when printing a debug message. Commit 69423d99fc182a81f3c5db3eb5c140acc6fc64be ("[MTD] update internal API to support 64-bit device size") has changed some structure values to 64-bit and has not updated this debug message, since it's not built by default. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David Woodhouse --- drivers/mtd/cmdlinepart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 5011fa73f91..1479da6d3aa 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -194,7 +194,7 @@ static struct mtd_partition * newpart(char *s, parts[this_part].name = extra_mem; extra_mem += name_len + 1; - dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n", + dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n", this_part, parts[this_part].name, parts[this_part].offset, -- cgit v1.2.3 From ae27a7ab2c74f9c075e03730c5f493163d048c62 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 24 Jun 2009 18:40:46 -0300 Subject: mtd: atmel_nand: Fix typo s/parititions/partitions/ Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 2802992b39d..20c828ba940 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -534,7 +534,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) &num_partitions); if ((!partitions) || (num_partitions == 0)) { - printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n"); + printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n"); res = ENXIO; goto err_no_partitions; } -- cgit v1.2.3 From e08afeb7e69f45e4ab9fbb8530fe433484b96606 Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 23 Jun 2009 17:14:01 -0500 Subject: [SCSI] ibmvscsi: Fix module load hang Fixes a regression seen in the ibmvscsi driver when using the VSCSI server in SLES 9 and SLES 10. The VSCSI server in these releases has a bug in it in which it does not send responses to unknown MADs. Check the OS Type field in the adapter info response and do not send these unsupported commands when talking to an older server. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 869a11bdccb..9928704e235 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1095,9 +1095,14 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct) MAX_INDIRECT_BUFS); hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS; } + + if (hostdata->madapter_info.os_type == 3) { + enable_fast_fail(hostdata); + return; + } } - enable_fast_fail(hostdata); + send_srp_login(hostdata); } /** -- cgit v1.2.3 From 87a2d34b0372dcf6bc4caf4d97a7889f5e62a1af Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 23 Jun 2009 01:06:40 +0200 Subject: [SCSI] fnic: remove redundant BUG_ONs and fix checks on unsigned The shost sg tablesize is set to FNIC_MAX_SG_DESC_CNT and fnic uses scsi_dma_map, so both BUG_ONs can be removed. scsi_dma_map may return -ENOMEM, sg_count should be int to catch that. Signed-off-by: Roel Kluin Signed-off-by: James Bottomley --- drivers/scsi/fnic/fnic_scsi.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index eabf3650285..bfc996971b8 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -245,7 +245,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, struct vnic_wq_copy *wq, struct fnic_io_req *io_req, struct scsi_cmnd *sc, - u32 sg_count) + int sg_count) { struct scatterlist *sg; struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); @@ -260,9 +260,6 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, char msg[2]; if (sg_count) { - BUG_ON(sg_count < 0); - BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT); - /* For each SGE, create a device desc entry */ desc = io_req->sgl_list; for_each_sg(scsi_sglist(sc), sg, sg_count, i) { @@ -344,7 +341,7 @@ int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) struct fnic *fnic; struct vnic_wq_copy *wq; int ret; - u32 sg_count; + int sg_count; unsigned long flags; unsigned long ptr; -- cgit v1.2.3 From e3f47cc74bddea8121560026185ede4770170043 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Wed, 24 Jun 2009 07:42:25 -0700 Subject: [SCSI] fnic: use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK Robert Love reported warning while building fnic_main.c: drivers/scsi/fnic/fnic_main.c:478: warning: `DMA_nnBIT_MASK' is deprecated. Replaced use of DMA_nnBIT_MASK by DMA_BIT_MASK(nn) Signed-off-by: Abhijeet Joglekar Signed-off-by: James Bottomley --- drivers/scsi/fnic/fnic_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c index a84072865fc..2c266c01dc5 100644 --- a/drivers/scsi/fnic/fnic_main.c +++ b/drivers/scsi/fnic/fnic_main.c @@ -473,16 +473,16 @@ static int __devinit fnic_probe(struct pci_dev *pdev, * limitation for the device. Try 40-bit first, and * fail to 32-bit. */ - err = pci_set_dma_mask(pdev, DMA_40BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40)); if (err) { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "No usable DMA configuration " "aborting\n"); goto err_out_release_regions; } - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "Unable to obtain 32-bit DMA " @@ -490,7 +490,7 @@ static int __devinit fnic_probe(struct pci_dev *pdev, goto err_out_release_regions; } } else { - err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "Unable to obtain 40-bit DMA " -- cgit v1.2.3 From d3a263a8168f78874254ea9da9595cfb0f3e96d7 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 24 Jun 2009 19:55:22 +0000 Subject: [SCSI] zalon: fix oops on attach failure I recently discovered on my zalon that if the attachment fails because of a bus misconfiguration (I scrapped my HVD array, so the card is now unterminated) then the system oopses. The reason is that if ncr_attach() returns NULL (signalling failure) that NULL is passed by the goto failed straight into ncr_detach() which oopses. The fix is just to return -ENODEV in this case. Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/zalon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index 97f3158fa7b..27e84e4b1fa 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -134,7 +134,7 @@ zalon_probe(struct parisc_device *dev) host = ncr_attach(&zalon7xx_template, unit, &device); if (!host) - goto fail; + return -ENODEV; if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) { dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ", -- cgit v1.2.3 From 6fdc03709433ccc2005f0f593ae9d9dd04f7b485 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 20 Jun 2009 13:23:59 +0200 Subject: firewire: core: do not DMA-map stack addresses The DMA mapping API cannot map on-stack addresses, as explained in Documentation/DMA-mapping.txt. Convert the two cases of on-stack packet payload buffers in firewire-core (payload of lock requests in the bus manager work and in iso resource management) to slab-allocated memory. There are a number on-stack buffers for quadlet write or quadlet read requests in firewire-core and firewire-sbp2. These are harmless; they are copied to/ from card driver internal DMA buffers since quadlet payloads are inlined with packet headers. Signed-off-by: Stefan Richter --- drivers/firewire/core-card.c | 14 +++++++------- drivers/firewire/core-cdev.c | 4 +++- drivers/firewire/core-iso.c | 24 +++++++++++++----------- drivers/firewire/core.h | 3 ++- 4 files changed, 25 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 543fccac81b..f74edae5cb4 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -196,8 +196,8 @@ static void allocate_broadcast_channel(struct fw_card *card, int generation) { int channel, bandwidth = 0; - fw_iso_resource_manage(card, generation, 1ULL << 31, - &channel, &bandwidth, true); + fw_iso_resource_manage(card, generation, 1ULL << 31, &channel, + &bandwidth, true, card->bm_transaction_data); if (channel == 31) { card->broadcast_channel_allocated = true; device_for_each_child(card->device, (void *)(long)generation, @@ -230,7 +230,6 @@ static void fw_card_bm_work(struct work_struct *work) bool do_reset = false; bool root_device_is_running; bool root_device_is_cmc; - __be32 lock_data[2]; spin_lock_irqsave(&card->lock, flags); @@ -273,22 +272,23 @@ static void fw_card_bm_work(struct work_struct *work) goto pick_me; } - lock_data[0] = cpu_to_be32(0x3f); - lock_data[1] = cpu_to_be32(local_id); + card->bm_transaction_data[0] = cpu_to_be32(0x3f); + card->bm_transaction_data[1] = cpu_to_be32(local_id); spin_unlock_irqrestore(&card->lock, flags); rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP, irm_id, generation, SCODE_100, CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID, - lock_data, sizeof(lock_data)); + card->bm_transaction_data, + sizeof(card->bm_transaction_data)); if (rcode == RCODE_GENERATION) /* Another bus reset, BM work has been rescheduled. */ goto out; if (rcode == RCODE_COMPLETE && - lock_data[0] != cpu_to_be32(0x3f)) { + card->bm_transaction_data[0] != cpu_to_be32(0x3f)) { /* Somebody else is BM. Only act as IRM. */ if (local_id == irm_id) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index d1d30c615b0..ced186d7e9a 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -125,6 +125,7 @@ struct iso_resource { int generation; u64 channels; s32 bandwidth; + __be32 transaction_data[2]; struct iso_resource_event *e_alloc, *e_dealloc; }; @@ -1049,7 +1050,8 @@ static void iso_resource_work(struct work_struct *work) r->channels, &channel, &bandwidth, todo == ISO_RES_ALLOC || todo == ISO_RES_REALLOC || - todo == ISO_RES_ALLOC_ONCE); + todo == ISO_RES_ALLOC_ONCE, + r->transaction_data); /* * Is this generation outdated already? As long as this resource sticks * in the idr, it will be scheduled again for a newer generation or at diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c index 166f19c6d38..110e731f557 100644 --- a/drivers/firewire/core-iso.c +++ b/drivers/firewire/core-iso.c @@ -177,9 +177,8 @@ EXPORT_SYMBOL(fw_iso_context_stop); */ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation, - int bandwidth, bool allocate) + int bandwidth, bool allocate, __be32 data[2]) { - __be32 data[2]; int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0; /* @@ -215,9 +214,9 @@ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation, } static int manage_channel(struct fw_card *card, int irm_id, int generation, - u32 channels_mask, u64 offset, bool allocate) + u32 channels_mask, u64 offset, bool allocate, __be32 data[2]) { - __be32 data[2], c, all, old; + __be32 c, all, old; int i, retry = 5; old = all = allocate ? cpu_to_be32(~0) : 0; @@ -260,7 +259,7 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation, } static void deallocate_channel(struct fw_card *card, int irm_id, - int generation, int channel) + int generation, int channel, __be32 buffer[2]) { u32 mask; u64 offset; @@ -269,7 +268,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id, offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI : CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO; - manage_channel(card, irm_id, generation, mask, offset, false); + manage_channel(card, irm_id, generation, mask, offset, false, buffer); } /** @@ -298,7 +297,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id, */ void fw_iso_resource_manage(struct fw_card *card, int generation, u64 channels_mask, int *channel, int *bandwidth, - bool allocate) + bool allocate, __be32 buffer[2]) { u32 channels_hi = channels_mask; /* channels 31...0 */ u32 channels_lo = channels_mask >> 32; /* channels 63...32 */ @@ -310,10 +309,12 @@ void fw_iso_resource_manage(struct fw_card *card, int generation, if (channels_hi) c = manage_channel(card, irm_id, generation, channels_hi, - CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, allocate); + CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, + allocate, buffer); if (channels_lo && c < 0) { c = manage_channel(card, irm_id, generation, channels_lo, - CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, allocate); + CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, + allocate, buffer); if (c >= 0) c += 32; } @@ -325,12 +326,13 @@ void fw_iso_resource_manage(struct fw_card *card, int generation, if (*bandwidth == 0) return; - ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate); + ret = manage_bandwidth(card, irm_id, generation, *bandwidth, + allocate, buffer); if (ret < 0) *bandwidth = 0; if (allocate && ret < 0 && c >= 0) { - deallocate_channel(card, irm_id, generation, c); + deallocate_channel(card, irm_id, generation, c, buffer); *channel = ret; } } diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h index c3cfc647e5e..6052816be35 100644 --- a/drivers/firewire/core.h +++ b/drivers/firewire/core.h @@ -120,7 +120,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event); int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma); void fw_iso_resource_manage(struct fw_card *card, int generation, - u64 channels_mask, int *channel, int *bandwidth, bool allocate); + u64 channels_mask, int *channel, int *bandwidth, + bool allocate, __be32 buffer[2]); /* -topology */ -- cgit v1.2.3 From 47749b14e55cd167632f9a27a4fc439e591e5268 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 25 Jun 2009 08:27:14 +0200 Subject: i2c: fix build bug in i2c-designware.c This build error triggers on x86: drivers/built-in.o: In function `i2c_dw_init': i2c-designware.c:(.text+0x4e37ca): undefined reference to `clk_get_rate' drivers/built-in.o: In function `dw_i2c_probe': i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to `clk_get' i2c-designware.c:(.devinit.text+0x51f76): undefined reference to `clk_enable' i2c-designware.c:(.devinit.text+0x520ff): undefined reference to `clk_disable' i2c-designware.c:(.devinit.text+0x52108): undefined reference to `clk_put' Because this new driver uses the clk_*() facilities which is an ARM-only thing currently. Signed-off-by: Ingo Molnar Acked-by: Baruch Siach Signed-off-by: Linus Torvalds --- drivers/i2c/busses/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index aa87b6a3bbe..8206442fbab 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -328,6 +328,7 @@ config I2C_DAVINCI config I2C_DESIGNWARE tristate "Synopsys DesignWare" + depends on HAVE_CLK help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. -- cgit v1.2.3 From 42dd2aa6496a2e87e496aac5494d2e1d6096c85b Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 25 Jun 2009 14:41:24 +0100 Subject: acm: Return ENODEV instead of EINVAL when trying to open ACM device. This is required, otherwise a user will get a EINVAL while opening a non-existing device, instead of ENODEV. This is what I get with this patch applied now instead of an "Invalid argument". cascardo@vespa:~$ cat /dev/ttyACM0 cat: /dev/ttyACM0: No such device cascardo@vespa:~$ Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 38bfdb0f666..02eb60bb679 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -550,7 +550,7 @@ static void acm_waker(struct work_struct *waker) static int acm_tty_open(struct tty_struct *tty, struct file *filp) { struct acm *acm; - int rv = -EINVAL; + int rv = -ENODEV; int i; dbg("Entering acm_tty_open."); -- cgit v1.2.3 From 922b13565b6a826a925f9f91f053dc9cb0d6210e Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 25 Jun 2009 14:41:30 +0100 Subject: acm: Fix oops when closing ACM tty device right after open has failed. This commit 10077d4a6674f535abdbe25cdecb1202af7948f1 has stopped checking if there was a valid acm device associated to the tty, which is not true right after open fails and tty subsystem tries to close the device. As an example, open fails with a non-existing device, when probe has never been called, because the device has never been plugged. This is common in systems with static modules and no udev. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 02eb60bb679..3f104599347 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -677,7 +677,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) /* Perform the closing process and see if we need to do the hardware shutdown */ - if (tty_port_close_start(&acm->port, tty, filp) == 0) + if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0) return; acm_port_down(acm, 0); tty_port_close_end(&acm->port, tty); -- cgit v1.2.3 From f4fa446883959c1c5f314a043e750dbfe3728c55 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 25 Jun 2009 14:41:37 +0100 Subject: usb_serial: Fix oops when unexisting usb serial device is opened. This commit 335f8514f200e63d689113d29cb7253a5c282967 has stopped properly checking if there is any usb serial associated with the tty in the close function. It happens the close function is called by releasing the terminal right after opening the device fails. As an example, open fails with a non-existing device, when probe has never been called, because the device has never been plugged. This is common in systems with static modules and no udev. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/usb-serial.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index d595aa5586a..a84216464ca 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -333,6 +333,9 @@ static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __func__, port->number); -- cgit v1.2.3 From 2b121bc262fa03c94e653b2d44356c2f86c1bcdc Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Thu, 25 Jun 2009 13:25:36 +0200 Subject: eeepc-laptop: Register as a pci-hotplug device The eee contains a logically (but not physically) hotpluggable PCIe slot. Currently this is handled by adding or removing the PCI device in response to rfkill events, but if a user has forced pciehp to bind to it (with the force=1 argument) then both drivers will try to handle the event and hilarity (in the form of oopses) will ensue. This can be avoided by having eee-laptop register the slot as a hotplug slot. Only one of pciehp and eee-laptop will successfully register this, avoiding the problem. Signed-off-by: Matthew Garrett Signed-off-by: Corentin Chary Tested-by: Darren Salt Signed-off-by: Randy Dunlap Signed-off-by: Len Brown --- drivers/platform/x86/Kconfig | 2 + drivers/platform/x86/eeepc-laptop.c | 87 +++++++++++++++++++++++++++++++++++++ 2 files changed, 89 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7232fe7104a..fee6a4022bc 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -357,6 +357,8 @@ config EEEPC_LAPTOP depends on RFKILL || RFKILL = n select BACKLIGHT_CLASS_DEVICE select HWMON + select HOTPLUG + select HOTPLUG_PCI if PCI ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 4207b26ff99..c0b203ca29f 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -31,6 +31,7 @@ #include #include #include +#include #define EEEPC_LAPTOP_VERSION "0.1" @@ -143,6 +144,7 @@ struct eeepc_hotk { u16 *keycode_map; struct rfkill *eeepc_wlan_rfkill; struct rfkill *eeepc_bluetooth_rfkill; + struct hotplug_slot *hotplug_slot; }; /* The actual device the driver binds to */ @@ -213,6 +215,15 @@ static struct acpi_driver eeepc_hotk_driver = { }, }; +/* PCI hotplug ops */ +static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value); + +static struct hotplug_slot_ops eeepc_hotplug_slot_ops = { + .owner = THIS_MODULE, + .get_adapter_status = eeepc_get_adapter_status, + .get_power_status = eeepc_get_adapter_status, +}; + /* The backlight device /sys/class/backlight */ static struct backlight_device *eeepc_backlight_device; @@ -612,6 +623,19 @@ static int notify_brn(void) return -1; } +static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, + u8 *value) +{ + int val = get_acpi(CM_ASL_WLAN); + + if (val == 1 || val == 0) + *value = val; + else + return -EINVAL; + + return 0; +} + static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; @@ -744,6 +768,54 @@ static void eeepc_unregister_rfkill_notifier(char *node) } } +static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot) +{ + kfree(hotplug_slot->info); + kfree(hotplug_slot); +} + +static int eeepc_setup_pci_hotplug(void) +{ + int ret = -ENOMEM; + struct pci_bus *bus = pci_find_bus(0, 1); + + if (!bus) { + printk(EEEPC_ERR "Unable to find wifi PCI bus\n"); + return -ENODEV; + } + + ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); + if (!ehotk->hotplug_slot) + goto error_slot; + + ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info), + GFP_KERNEL); + if (!ehotk->hotplug_slot->info) + goto error_info; + + ehotk->hotplug_slot->private = ehotk; + ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug; + ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops; + eeepc_get_adapter_status(ehotk->hotplug_slot, + &ehotk->hotplug_slot->info->adapter_status); + + ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi"); + if (ret) { + printk(EEEPC_ERR "Unable to register hotplug slot - %d\n", ret); + goto error_register; + } + + return 0; + +error_register: + kfree(ehotk->hotplug_slot->info); +error_info: + kfree(ehotk->hotplug_slot); + ehotk->hotplug_slot = NULL; +error_slot: + return ret; +} + static int eeepc_hotk_add(struct acpi_device *device) { int result; @@ -802,8 +874,21 @@ static int eeepc_hotk_add(struct acpi_device *device) goto bluetooth_fail; } + result = eeepc_setup_pci_hotplug(); + /* + * If we get -EBUSY then something else is handling the PCI hotplug - + * don't fail in this case + */ + if (result == -EBUSY) + return 0; + else if (result) + goto pci_fail; + return 0; + pci_fail: + if (ehotk->eeepc_bluetooth_rfkill) + rfkill_unregister(ehotk->eeepc_bluetooth_rfkill); bluetooth_fail: rfkill_destroy(ehotk->eeepc_bluetooth_rfkill); rfkill_unregister(ehotk->eeepc_wlan_rfkill); @@ -825,6 +910,8 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type) eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); + if (ehotk->hotplug_slot) + pci_hp_deregister(ehotk->hotplug_slot); kfree(ehotk); return 0; -- cgit v1.2.3 From 19b532892834b7f1c04b2940ac73177dc566fed5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 25 Jun 2009 13:25:37 +0200 Subject: eeepc-laptop.c: use pr_fmt and pr_ Convert the unusual printk(EEEPC_ uses to the more standard pr_fmt and pr_(. Signed-off-by: Joe Perches Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 55 +++++++++++++++---------------------- 1 file changed, 22 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index c0b203ca29f..d14f7149cb1 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -16,6 +16,8 @@ * GNU General Public License for more details. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -41,11 +43,6 @@ #define EEEPC_HOTK_DEVICE_NAME "Hotkey" #define EEEPC_HOTK_HID "ASUS010" -#define EEEPC_LOG EEEPC_HOTK_FILE ": " -#define EEEPC_ERR KERN_ERR EEEPC_LOG -#define EEEPC_WARNING KERN_WARNING EEEPC_LOG -#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG -#define EEEPC_INFO KERN_INFO EEEPC_LOG /* * Definitions for Asus EeePC @@ -285,7 +282,7 @@ static int set_acpi(int cm, int value) if (method == NULL) return -ENODEV; if (write_acpi_int(ehotk->handle, method, value, NULL)) - printk(EEEPC_WARNING "Error writing %s\n", method); + pr_warning("Error writing %s\n", method); } return 0; } @@ -298,7 +295,7 @@ static int get_acpi(int cm) if (method == NULL) return -ENODEV; if (read_acpi_int(ehotk->handle, method, &value)) - printk(EEEPC_WARNING "Error reading %s\n", method); + pr_warning("Error reading %s\n", method); } return value; } @@ -562,26 +559,23 @@ static int eeepc_hotk_check(void) if (ehotk->device->status.present) { if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag, &buffer)) { - printk(EEEPC_ERR "Hotkey initialization failed\n"); + pr_err("Hotkey initialization failed\n"); return -ENODEV; } else { - printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n", - ehotk->init_flag); + pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag); } /* get control methods supported */ if (read_acpi_int(ehotk->handle, "CMSG" , &ehotk->cm_supported)) { - printk(EEEPC_ERR - "Get control methods supported failed\n"); + pr_err("Get control methods supported failed\n"); return -ENODEV; } else { - printk(EEEPC_INFO - "Get control methods supported: 0x%x\n", - ehotk->cm_supported); + pr_info("Get control methods supported: 0x%x\n", + ehotk->cm_supported); } ehotk->inputdev = input_allocate_device(); if (!ehotk->inputdev) { - printk(EEEPC_INFO "Unable to allocate input device\n"); + pr_info("Unable to allocate input device\n"); return 0; } ehotk->inputdev->name = "Asus EeePC extra buttons"; @@ -600,12 +594,12 @@ static int eeepc_hotk_check(void) } result = input_register_device(ehotk->inputdev); if (result) { - printk(EEEPC_INFO "Unable to register input device\n"); + pr_info("Unable to register input device\n"); input_free_device(ehotk->inputdev); return 0; } } else { - printk(EEEPC_ERR "Hotkey device not present, aborting\n"); + pr_err("Hotkey device not present, aborting\n"); return -EINVAL; } return 0; @@ -643,7 +637,7 @@ static void eeepc_rfkill_hotplug(void) bool blocked; if (!bus) { - printk(EEEPC_WARNING "Unable to find PCI bus 1?\n"); + pr_warning("Unable to find PCI bus 1?\n"); return; } @@ -659,7 +653,7 @@ static void eeepc_rfkill_hotplug(void) if (dev) { pci_bus_assign_resources(bus); if (pci_bus_add_device(dev)) - printk(EEEPC_ERR "Unable to hotplug wifi\n"); + pr_err("Unable to hotplug wifi\n"); } } else { dev = pci_get_slot(bus, 0); @@ -742,8 +736,7 @@ static int eeepc_register_rfkill_notifier(char *node) eeepc_rfkill_notify, NULL); if (ACPI_FAILURE(status)) - printk(EEEPC_WARNING - "Failed to register notify on %s\n", node); + pr_warning("Failed to register notify on %s\n", node); } else return -ENODEV; @@ -762,8 +755,7 @@ static void eeepc_unregister_rfkill_notifier(char *node) ACPI_SYSTEM_NOTIFY, eeepc_rfkill_notify); if (ACPI_FAILURE(status)) - printk(EEEPC_ERR - "Error removing rfkill notify handler %s\n", + pr_err("Error removing rfkill notify handler %s\n", node); } } @@ -780,7 +772,7 @@ static int eeepc_setup_pci_hotplug(void) struct pci_bus *bus = pci_find_bus(0, 1); if (!bus) { - printk(EEEPC_ERR "Unable to find wifi PCI bus\n"); + pr_err("Unable to find wifi PCI bus\n"); return -ENODEV; } @@ -801,7 +793,7 @@ static int eeepc_setup_pci_hotplug(void) ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi"); if (ret) { - printk(EEEPC_ERR "Unable to register hotplug slot - %d\n", ret); + pr_err("Unable to register hotplug slot - %d\n", ret); goto error_register; } @@ -822,7 +814,7 @@ static int eeepc_hotk_add(struct acpi_device *device) if (!device) return -EINVAL; - printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n"); + pr_notice(EEEPC_HOTK_NAME "\n"); ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); if (!ehotk) return -ENOMEM; @@ -1105,8 +1097,7 @@ static int eeepc_backlight_init(struct device *dev) bd = backlight_device_register(EEEPC_HOTK_FILE, dev, NULL, &eeepcbl_ops); if (IS_ERR(bd)) { - printk(EEEPC_ERR - "Could not register eeepc backlight device\n"); + pr_err("Could not register eeepc backlight device\n"); eeepc_backlight_device = NULL; return PTR_ERR(bd); } @@ -1125,8 +1116,7 @@ static int eeepc_hwmon_init(struct device *dev) hwmon = hwmon_device_register(dev); if (IS_ERR(hwmon)) { - printk(EEEPC_ERR - "Could not register eeepc hwmon device\n"); + pr_err("Could not register eeepc hwmon device\n"); eeepc_hwmon_device = NULL; return PTR_ERR(hwmon); } @@ -1159,8 +1149,7 @@ static int __init eeepc_laptop_init(void) if (result) goto fail_backlight; } else - printk(EEEPC_INFO "Backlight controlled by ACPI video " - "driver\n"); + pr_info("Backlight controlled by ACPI video driver\n"); result = eeepc_hwmon_init(dev); if (result) -- cgit v1.2.3 From 7de39389d8f61aa517ce2a8b4d925acc62696ae5 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Thu, 25 Jun 2009 13:25:38 +0200 Subject: eeepc-laptop: rfkill refactoring Refactor rfkill code, because we'll add another rfkill for wwan3g later. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 160 +++++++++++++++++++----------------- 1 file changed, 84 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d14f7149cb1..e46981a5f20 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -139,8 +139,8 @@ struct eeepc_hotk { u16 event_count[128]; /* count for each event */ struct input_dev *inputdev; u16 *keycode_map; - struct rfkill *eeepc_wlan_rfkill; - struct rfkill *eeepc_bluetooth_rfkill; + struct rfkill *wlan_rfkill; + struct rfkill *bluetooth_rfkill; struct hotplug_slot *hotplug_slot; }; @@ -663,7 +663,7 @@ static void eeepc_rfkill_hotplug(void) } } - rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked); + rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); } static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) @@ -828,66 +828,8 @@ static int eeepc_hotk_add(struct acpi_device *device) if (result) goto ehotk_fail; - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); - - if (get_acpi(CM_ASL_WLAN) != -1) { - ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan", - &device->dev, - RFKILL_TYPE_WLAN, - &eeepc_rfkill_ops, - (void *)CM_ASL_WLAN); - - if (!ehotk->eeepc_wlan_rfkill) - goto wlan_fail; - - rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill, - get_acpi(CM_ASL_WLAN) != 1); - result = rfkill_register(ehotk->eeepc_wlan_rfkill); - if (result) - goto wlan_fail; - } - - if (get_acpi(CM_ASL_BLUETOOTH) != -1) { - ehotk->eeepc_bluetooth_rfkill = - rfkill_alloc("eeepc-bluetooth", - &device->dev, - RFKILL_TYPE_BLUETOOTH, - &eeepc_rfkill_ops, - (void *)CM_ASL_BLUETOOTH); - - if (!ehotk->eeepc_bluetooth_rfkill) - goto bluetooth_fail; - - rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill, - get_acpi(CM_ASL_BLUETOOTH) != 1); - result = rfkill_register(ehotk->eeepc_bluetooth_rfkill); - if (result) - goto bluetooth_fail; - } - - result = eeepc_setup_pci_hotplug(); - /* - * If we get -EBUSY then something else is handling the PCI hotplug - - * don't fail in this case - */ - if (result == -EBUSY) - return 0; - else if (result) - goto pci_fail; - return 0; - pci_fail: - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_unregister(ehotk->eeepc_bluetooth_rfkill); - bluetooth_fail: - rfkill_destroy(ehotk->eeepc_bluetooth_rfkill); - rfkill_unregister(ehotk->eeepc_wlan_rfkill); - wlan_fail: - rfkill_destroy(ehotk->eeepc_wlan_rfkill); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); ehotk_fail: kfree(ehotk); ehotk = NULL; @@ -900,18 +842,13 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type) if (!device || !acpi_driver_data(device)) return -EINVAL; - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); - if (ehotk->hotplug_slot) - pci_hp_deregister(ehotk->hotplug_slot); - kfree(ehotk); return 0; } static int eeepc_hotk_resume(struct acpi_device *device) { - if (ehotk->eeepc_wlan_rfkill) { + if (ehotk->wlan_rfkill) { bool wlan; /* Workaround - it seems that _PTS disables the wireless @@ -923,14 +860,13 @@ static int eeepc_hotk_resume(struct acpi_device *device) wlan = get_acpi(CM_ASL_WLAN); set_acpi(CM_ASL_WLAN, wlan); - rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, - wlan != 1); + rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1); eeepc_rfkill_hotplug(); } - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill, + if (ehotk->bluetooth_rfkill) + rfkill_set_sw_state(ehotk->bluetooth_rfkill, get_acpi(CM_ASL_BLUETOOTH) != 1); return 0; @@ -1052,10 +988,14 @@ static void eeepc_backlight_exit(void) static void eeepc_rfkill_exit(void) { - if (ehotk->eeepc_wlan_rfkill) - rfkill_unregister(ehotk->eeepc_wlan_rfkill); - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_unregister(ehotk->eeepc_bluetooth_rfkill); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); + if (ehotk->wlan_rfkill) + rfkill_unregister(ehotk->wlan_rfkill); + if (ehotk->bluetooth_rfkill) + rfkill_unregister(ehotk->bluetooth_rfkill); + if (ehotk->hotplug_slot) + pci_hp_deregister(ehotk->hotplug_slot); } static void eeepc_input_exit(void) @@ -1090,6 +1030,67 @@ static void __exit eeepc_laptop_exit(void) platform_driver_unregister(&platform_driver); } +static int eeepc_new_rfkill(struct rfkill **rfkill, + const char *name, struct device *dev, + enum rfkill_type type, int cm) +{ + int result; + + if (get_acpi(cm) == -1) + return -ENODEV; + + *rfkill = rfkill_alloc(name, dev, type, + &eeepc_rfkill_ops, (void *)(unsigned long)cm); + + if (!*rfkill) + return -EINVAL; + + rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1); + result = rfkill_register(*rfkill); + if (result) { + rfkill_destroy(*rfkill); + *rfkill = NULL; + return result; + } + return 0; +} + + +static int eeepc_rfkill_init(struct device *dev) +{ + int result = 0; + + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + + result = eeepc_new_rfkill(&ehotk->wlan_rfkill, + "eeepc-wlan", dev, + RFKILL_TYPE_WLAN, CM_ASL_WLAN); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill, + "eeepc-bluetooth", dev, + RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_setup_pci_hotplug(); + /* + * If we get -EBUSY then something else is handling the PCI hotplug - + * don't fail in this case + */ + if (result == -EBUSY) + result = 0; + +exit: + if (result && result != -ENODEV) + eeepc_rfkill_exit(); + return result; +} + static int eeepc_backlight_init(struct device *dev) { struct backlight_device *bd; @@ -1173,7 +1174,15 @@ static int __init eeepc_laptop_init(void) &platform_attribute_group); if (result) goto fail_sysfs; + + result = eeepc_rfkill_init(dev); + if (result) + goto fail_rfkill; + return 0; +fail_rfkill: + sysfs_remove_group(&platform_device->dev.kobj, + &platform_attribute_group); fail_sysfs: platform_device_del(platform_device); fail_platform_device2: @@ -1186,7 +1195,6 @@ fail_hwmon: eeepc_backlight_exit(); fail_backlight: eeepc_input_exit(); - eeepc_rfkill_exit(); return result; } -- cgit v1.2.3 From 1ddec2f9435e77b4d3f50eced68c4c942f2bcd4b Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Thu, 25 Jun 2009 13:25:39 +0200 Subject: eeepc-laptop: right parent device Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e46981a5f20..5b102c2f66a 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1143,18 +1143,6 @@ static int __init eeepc_laptop_init(void) acpi_bus_unregister_driver(&eeepc_hotk_driver); return -ENODEV; } - dev = acpi_get_physical_device(ehotk->device->handle); - - if (!acpi_video_backlight_support()) { - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; - } else - pr_info("Backlight controlled by ACPI video driver\n"); - - result = eeepc_hwmon_init(dev); - if (result) - goto fail_hwmon; eeepc_enable_camera(); @@ -1175,12 +1163,30 @@ static int __init eeepc_laptop_init(void) if (result) goto fail_sysfs; + dev = &platform_device->dev; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + pr_info("Backlight controlled by ACPI video " + "driver\n"); + + result = eeepc_hwmon_init(dev); + if (result) + goto fail_hwmon; + result = eeepc_rfkill_init(dev); if (result) goto fail_rfkill; return 0; fail_rfkill: + eeepc_hwmon_exit(); +fail_hwmon: + eeepc_backlight_exit(); +fail_backlight: sysfs_remove_group(&platform_device->dev.kobj, &platform_attribute_group); fail_sysfs: @@ -1190,10 +1196,6 @@ fail_platform_device2: fail_platform_device1: platform_driver_unregister(&platform_driver); fail_platform_driver: - eeepc_hwmon_exit(); -fail_hwmon: - eeepc_backlight_exit(); -fail_backlight: eeepc_input_exit(); return result; } -- cgit v1.2.3 From f36509e7248631671d02f48d1a88f56cdeb54ed8 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Thu, 25 Jun 2009 13:25:40 +0200 Subject: eeepc-laptop: makes get_acpi() returns -ENODEV If there is there is no getter defined, get_acpi() will return -ENODEV. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 5b102c2f66a..19cc9ae7db5 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -289,7 +289,7 @@ static int set_acpi(int cm, int value) static int get_acpi(int cm) { - int value = -1; + int value = -ENODEV; if ((ehotk->cm_supported & (0x1 << cm))) { const char *method = cm_getv[cm]; if (method == NULL) @@ -367,13 +367,19 @@ static ssize_t store_sys_acpi(int cm, const char *buf, size_t count) rv = parse_arg(buf, count, &value); if (rv > 0) - set_acpi(cm, value); + value = set_acpi(cm, value); + if (value < 0) + return value; return rv; } static ssize_t show_sys_acpi(int cm, char *buf) { - return sprintf(buf, "%d\n", get_acpi(cm)); + int value = get_acpi(cm); + + if (value < 0) + return value; + return sprintf(buf, "%d\n", value); } #define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \ @@ -1036,8 +1042,9 @@ static int eeepc_new_rfkill(struct rfkill **rfkill, { int result; - if (get_acpi(cm) == -1) - return -ENODEV; + result = get_acpi(cm); + if (result < 0) + return result; *rfkill = rfkill_alloc(name, dev, type, &eeepc_rfkill_ops, (void *)(unsigned long)cm); -- cgit v1.2.3 From dbfa3ba90dfe353a56e107cff5bce9fb7976f06f Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Thu, 25 Jun 2009 13:25:41 +0200 Subject: eeepc-laptop: get the right value for CMSG CMSG is an ACPI method used to find features available on an Eee PC. But some features are never repported, even if present. If the getter of a feature is present, this patch will set the corresponding bit in cmsg. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 19cc9ae7db5..f5d8473ea66 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -553,6 +553,28 @@ static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) return -EINVAL; } +static void cmsg_quirk(int cm, const char *name) +{ + int dummy; + + /* Some BIOSes do not report cm although it is avaliable. + Check if cm_getv[cm] works and, if yes, assume cm should be set. */ + if (!(ehotk->cm_supported & (1 << cm)) + && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) { + pr_info("%s (%x) not reported by BIOS," + " enabling anyway\n", name, 1 << cm); + ehotk->cm_supported |= 1 << cm; + } +} + +static void cmsg_quirks(void) +{ + cmsg_quirk(CM_ASL_LID, "LID"); + cmsg_quirk(CM_ASL_TYPE, "TYPE"); + cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER"); + cmsg_quirk(CM_ASL_TPD, "TPD"); +} + static int eeepc_hotk_check(void) { const struct key_entry *key; @@ -576,6 +598,7 @@ static int eeepc_hotk_check(void) pr_err("Get control methods supported failed\n"); return -ENODEV; } else { + cmsg_quirks(); pr_info("Get control methods supported: 0x%x\n", ehotk->cm_supported); } -- cgit v1.2.3 From 3cd530b5aaffd27b231f9717730f2f6684c00bda Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Thu, 25 Jun 2009 13:25:42 +0200 Subject: eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go Signed-off-by: Janne Grunau Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index f5d8473ea66..ec560f16d72 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -141,6 +141,7 @@ struct eeepc_hotk { u16 *keycode_map; struct rfkill *wlan_rfkill; struct rfkill *bluetooth_rfkill; + struct rfkill *wwan3g_rfkill; struct hotplug_slot *hotplug_slot; }; @@ -1023,6 +1024,8 @@ static void eeepc_rfkill_exit(void) rfkill_unregister(ehotk->wlan_rfkill); if (ehotk->bluetooth_rfkill) rfkill_unregister(ehotk->bluetooth_rfkill); + if (ehotk->wwan3g_rfkill) + rfkill_unregister(ehotk->wwan3g_rfkill); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); } @@ -1107,6 +1110,13 @@ static int eeepc_rfkill_init(struct device *dev) if (result && result != -ENODEV) goto exit; + result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill, + "eeepc-wwan3g", dev, + RFKILL_TYPE_WWAN, CM_ASL_3G); + + if (result && result != -ENODEV) + goto exit; + result = eeepc_setup_pci_hotplug(); /* * If we get -EBUSY then something else is handling the PCI hotplug - -- cgit v1.2.3 From 412af97838828bc6d035a1902c8974f944663da6 Mon Sep 17 00:00:00 2001 From: Troy Moure Date: Thu, 25 Jun 2009 17:05:35 -0600 Subject: ACPI: video: prevent NULL deref in acpi_get_pci_dev() ref: http://thread.gmane.org/gmane.linux.kernel/857228/focus=857468 When the ACPI video driver initializes, it does a namespace walk looking for for supported devices. When we find an appropriate handle, we walk up the ACPI tree looking for a PCI root bus, and then walk back down the PCI bus, assuming that every device inbetween is a P2P bridge. This assumption is not correct, and is reported broken on at least: Dell Latitude E6400 ThinkPad X61 Dell XPS M1330 Add a NULL deref check to prevent boot panics. Reported-by: Alessandro Suardi Signed-off-by: Troy Moure Signed-off-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/pci_root.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 8a5bf3b356f..55b5b90c2a4 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -395,7 +395,7 @@ struct pci_dev *acpi_get_pci_dev(acpi_handle handle) fn = adr & 0xffff; pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn)); - if (hnd == handle) + if (!pdev || hnd == handle) break; pbus = pdev->subordinate; -- cgit v1.2.3 From 3514141aedc16c7344117d5bd79ec1310edf8fb3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 18 Jun 2009 19:20:51 +0000 Subject: powerpc/pmac: Fix DMA ops for MacIO devices The macio_dev's created to map devices inside the MacIO ASICs don't have proper dma_ops. This causes crashes on some machines since the SCSI code calls dma_map_* on our behalf using the device we hang from. This fixes it by copying the parent PCI device dma_ops into the macio_dev when creating it. Signed-off-by: Benjamin Herrenschmidt --- drivers/macintosh/macio_asic.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 6e149f4a1ff..a0f68386c12 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, dev->ofdev.dev.bus = &macio_bus_type; dev->ofdev.dev.release = macio_release_dev; +#ifdef CONFIG_PCI + /* Set the DMA ops to the ones from the PCI device, this could be + * fishy if we didn't know that on PowerMac it's always direct ops + * or iommu ops that will work fine + */ + dev->ofdev.dev.archdata.dma_ops = + chip->lbus.pdev->dev.archdata.dma_ops; + dev->ofdev.dev.archdata.dma_data = + chip->lbus.pdev->dev.archdata.dma_data; +#endif /* CONFIG_PCI */ + #ifdef DEBUG printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n", dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj); -- cgit v1.2.3 From e4031d52c57b17c76bbdb15fcf1a32a9f87d9756 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Thu, 18 Jun 2009 15:14:36 +0000 Subject: powerpc/BSR: add 4096 byte BSR size Add a 4096 byte BSR size which will be used on new machines. Also, remove the warning when we run into an unknown size, as this can spam the kernel log excessively. Signed-off-by: Sonny Rao Signed-off-by: Benjamin Herrenschmidt --- drivers/char/bsr.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 140ea10ecb8..7d9fd8a8dfd 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -75,12 +75,13 @@ static struct class *bsr_class; static int bsr_major; enum { - BSR_8 = 0, - BSR_16 = 1, - BSR_64 = 2, - BSR_128 = 3, - BSR_UNKNOWN = 4, - BSR_MAX = 5, + BSR_8 = 0, + BSR_16 = 1, + BSR_64 = 2, + BSR_128 = 3, + BSR_4096 = 4, + BSR_UNKNOWN = 5, + BSR_MAX = 6, }; static unsigned bsr_types[BSR_MAX]; @@ -218,9 +219,11 @@ static int bsr_add_node(struct device_node *bn) case 128: cur->bsr_type = BSR_128; break; + case 4096: + cur->bsr_type = BSR_4096; + break; default: cur->bsr_type = BSR_UNKNOWN; - printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes); } cur->bsr_num = bsr_types[cur->bsr_type]; -- cgit v1.2.3 From 04a85d1234d7e1682a612565e663e6b760918643 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Thu, 18 Jun 2009 15:13:04 +0000 Subject: powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel On Mon, Nov 17, 2008 at 01:26:13AM -0600, Sonny Rao wrote: > On Fri, Nov 07, 2008 at 04:28:29PM +1100, Paul Mackerras wrote: > > Sonny Rao writes: > > > > > Fix the BSR driver to allow small BSR devices, which are limited to a > > > single 4k space, on a 64k page kernel. Previously the driver would > > > reject the mmap since the size was smaller than PAGESIZE (or because > > > the size was greater than the size of the device). Now, we check for > > > this case use remap_4k_pfn(). Also, take out code to set vm_flags, > > > as the remap_pfn functions will do this for us. > > > > Thanks. > > > > Do we know that the BSR size will always be 4k if it's not a multiple > > of 64k? Is it possible that we could get 8k, 16k or 32k or BSRs? > > If it is possible, what does the user need to be able to do? Do they > > just want to map 4k, or might then want to map the whole thing? > > > Hi Paul, I took a look at changing the driver to reject a request for > mapping more than a single 4k page, however the only indication we get > of the requested size in the mmap function is the vma size, and this > is always one page at minimum. So, it's not possible to determine if > the user wants one 4k page or more. As I noted in my first response, > there is only one case where this is even possible and I don't think > it is a significant concern. > > I did notice that I left out the check to see if the user is trying to > map more than the device length, so I fixed that. Here's the revised > patch. Alright, I've reworked this now so that if we get one of these cases where there's a bsr that's > 4k and < 64k on a 64k kernel we'll only advertise that it is a 4k BSR to userspace. I think this is the best solution since user programs are only supposed to look at sysfs to determine how much can be mapped, and libbsr does this as well. Please consider for 2.6.31 as a fix, thanks. Signed-off-by: Benjamin Herrenschmidt --- drivers/char/bsr.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 7d9fd8a8dfd..c02db01f736 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -27,6 +27,7 @@ #include #include #include +#include #include /* @@ -118,15 +119,22 @@ static int bsr_mmap(struct file *filp, struct vm_area_struct *vma) { unsigned long size = vma->vm_end - vma->vm_start; struct bsr_dev *dev = filp->private_data; + int ret; - if (size > dev->bsr_len || (size & (PAGE_SIZE-1))) - return -EINVAL; - - vma->vm_flags |= (VM_IO | VM_DONTEXPAND); vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT, - size, vma->vm_page_prot)) + /* check for the case of a small BSR device and map one 4k page for it*/ + if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE) + ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12, + vma->vm_page_prot); + else if (size <= dev->bsr_len) + ret = io_remap_pfn_range(vma, vma->vm_start, + dev->bsr_addr >> PAGE_SHIFT, + size, vma->vm_page_prot); + else + return -EINVAL; + + if (ret) return -EAGAIN; return 0; @@ -206,6 +214,11 @@ static int bsr_add_node(struct device_node *bn) cur->bsr_stride = bsr_stride[i]; cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs); + /* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */ + /* we can only map 4k of it, so only advertise the 4k in sysfs */ + if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE) + cur->bsr_len = 4096; + switch(cur->bsr_bytes) { case 8: cur->bsr_type = BSR_8; -- cgit v1.2.3 From 5ba762c9bb3ce2cc11e9e111cb3c476e84b91668 Mon Sep 17 00:00:00 2001 From: Adrian Reber Date: Thu, 26 Mar 2009 02:05:42 +0000 Subject: powerpc/rtas: Fix watchdog driver temperature read functionality Using the RTAS watchdog driver to read out the temperature crashes on a PXCAB: Unable to handle kernel paging request for data at address 0xfe347b50 Faulting instruction address: 0xc00000000001af64 Oops: Kernel access of bad area, sig: 11 [#1] The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is removed by using the function rtas_get_sensor() which does the right thing. Signed-off-by: Adrian Reber Acked-by: Utz Bacher Signed-off-by: Benjamin Herrenschmidt --- drivers/watchdog/wdrtas.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index a4fe7a38d9b..3bde56bce63 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -218,16 +218,14 @@ static void wdrtas_timer_keepalive(void) */ static int wdrtas_get_temperature(void) { - long result; + int result; int temperature = 0; - result = rtas_call(wdrtas_token_get_sensor_state, 2, 2, - (void *)__pa(&temperature), - WDRTAS_THERMAL_SENSOR, 0); + result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature); if (result < 0) printk(KERN_WARNING "wdrtas: reading the thermal sensor " - "faild: %li\n", result); + "failed: %i\n", result); else temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */ -- cgit v1.2.3 From 789547508f22e482825f52f813b59680408ec2c7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 11:26:06 +0000 Subject: ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests Such requests should be failed with -EIO (like all other requests in this function) instead of being completed successfully. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 93b7886a2d6..95db5f03f6a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -152,7 +152,7 @@ void ide_kill_rq(ide_drive_t *drive, struct request *rq) if ((media == ide_floppy || media == ide_tape) && drv_req) { rq->errors = 0; - ide_complete_rq(drive, 0, blk_rq_bytes(rq)); + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); } else { if (media == ide_tape) rq->errors = IDE_DRV_ERROR_GENERAL; -- cgit v1.2.3 From 5e955245d6cf49c5ed26c7add7392ff5a6762bf4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 11:27:27 +0000 Subject: ide: always kill the whole request on error * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq() and ide_floppy_do_request() for failed requests. [ bugfix part ] * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset() and ide_complete_drive_reset(). Then remove ide_rq_bytes(). [ cleanup part ] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-devsets.c | 2 +- drivers/ide/ide-eh.c | 2 +- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-io.c | 14 ++------------ 4 files changed, 5 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c index 5bf958e5b1d..1099bf7cf96 100644 --- a/drivers/ide/ide-devsets.c +++ b/drivers/ide/ide-devsets.c @@ -183,6 +183,6 @@ ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq) err = setfunc(drive, *(int *)&rq->cmd[1]); if (err) rq->errors = err; - ide_complete_rq(drive, err, ide_rq_bytes(rq)); + ide_complete_rq(drive, err, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c index 2b914197961..e9abf2c3c33 100644 --- a/drivers/ide/ide-eh.c +++ b/drivers/ide/ide-eh.c @@ -149,7 +149,7 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) { if (err <= 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq)); + ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq)); } } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8b3f204f7d7..fefbdfc8db0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -293,7 +293,7 @@ out_end: drive->failed_pc = NULL; if (blk_fs_request(rq) == 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, -EIO, ide_rq_bytes(rq)); + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 95db5f03f6a..d5f3c77bead 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -112,16 +112,6 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) } } -/* obsolete, blk_rq_bytes() should be used instead */ -unsigned int ide_rq_bytes(struct request *rq) -{ - if (blk_pc_request(rq)) - return blk_rq_bytes(rq); - else - return blk_rq_cur_sectors(rq) << 9; -} -EXPORT_SYMBOL_GPL(ide_rq_bytes); - int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes) { ide_hwif_t *hwif = drive->hwif; @@ -152,14 +142,14 @@ void ide_kill_rq(ide_drive_t *drive, struct request *rq) if ((media == ide_floppy || media == ide_tape) && drv_req) { rq->errors = 0; - ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); } else { if (media == ide_tape) rq->errors = IDE_DRV_ERROR_GENERAL; else if (blk_fs_request(rq) == 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, -EIO, ide_rq_bytes(rq)); } + + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); } static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) -- cgit v1.2.3 From 7e25a2422987a37729706b18583d177966919d2a Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Thu, 25 Jun 2009 18:52:05 -0700 Subject: intel-iommu: fix Identity Mapping to be arch independent Drop the e820 scanning and use existing function for finding valid RAM regions to add to 1:1 mapping. Signed-off-by: Chris Wright Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index e53eacd75c8..420afa88728 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -39,7 +39,6 @@ #include #include #include -#include #include "pci.h" #define ROOT_SIZE VTD_PAGE_SIZE @@ -1908,7 +1907,6 @@ static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, rmrr->end_address + 1); } -#ifdef CONFIG_DMAR_GFX_WA struct iommu_prepare_data { struct pci_dev *pdev; int ret; @@ -1943,6 +1941,7 @@ static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev) return data.ret; } +#ifdef CONFIG_DMAR_GFX_WA static void __init iommu_prepare_gfx_mapping(void) { struct pci_dev *pdev = NULL; @@ -2081,7 +2080,6 @@ static int domain_add_dev_info(struct dmar_domain *domain, static int iommu_prepare_static_identity_mapping(void) { - int i; struct pci_dev *pdev = NULL; int ret; @@ -2091,17 +2089,10 @@ static int iommu_prepare_static_identity_mapping(void) printk(KERN_INFO "IOMMU: Setting identity map:\n"); for_each_pci_dev(pdev) { - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (ei->type == E820_RAM) { - ret = iommu_prepare_identity_map(pdev, - ei->addr, ei->addr + ei->size); - if (ret) { - printk(KERN_INFO "1:1 mapping to one domain failed.\n"); - return -EFAULT; - } - } + ret = iommu_prepare_with_active_regions(pdev); + if (ret) { + printk(KERN_INFO "1:1 mapping to one domain failed.\n"); + return -EFAULT; } ret = domain_add_dev_info(si_domain, pdev); if (ret) -- cgit v1.2.3 From 584fcff428bde3b9985ba21498764e9dba2fd3ce Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 10 Jun 2009 18:29:54 +0200 Subject: amd64_edac: check only ECC bit in amd64_determine_edac_cap Checking whether the machine is using ECC enabled DRAM is done through testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do that instead of testing all bits from the DimmEccEn upwards. Also, remove mci->edac_cap assignment and use value returned from amd64_determine_edac_cap(). Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index c36bf40568c..3b76605330e 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -754,13 +754,13 @@ static void amd64_cpu_display_info(struct amd64_pvt *pvt) static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt) { int bit; - enum dev_type edac_cap = EDAC_NONE; + enum dev_type edac_cap = EDAC_FLAG_NONE; bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F) ? 19 : 17; - if (pvt->dclr0 >> BIT(bit)) + if (pvt->dclr0 & BIT(bit)) edac_cap = EDAC_FLAG_SECDED; return edac_cap; @@ -3006,7 +3006,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci) mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2; mci->edac_ctl_cap = EDAC_FLAG_NONE; - mci->edac_cap = EDAC_FLAG_NONE; if (pvt->nbcap & K8_NBCAP_SECDED) mci->edac_ctl_cap |= EDAC_FLAG_SECDED; -- cgit v1.2.3 From 30c875cbc1836a03a1acc6c998fa8a04f29f8f73 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 22 Jun 2009 19:42:24 +0200 Subject: amd64_edac: fix ecc_enable_override handling amd64_check_ecc_enabled() returns non-zero status when ECC checking/correcting is disabled and this fails further loading of the driver even when 'ecc_enable_override' boot param is used. Fix that by clearing return status in that case. Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 3b76605330e..8497963a61f 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2966,7 +2966,12 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) " Use of the override can cause " "unknown side effects.\n"); ret = -ENODEV; - } + } else + /* + * enable further driver loading if ECC enable is + * overridden. + */ + ret = 0; } else { amd64_printk(KERN_INFO, "ECC is enabled by BIOS, Proceeding " -- cgit v1.2.3 From 37da045067b4e923190662e21029005ea53bfaa1 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 10 Jun 2009 17:36:57 +0200 Subject: amd64_edac: misc small cleanups - cleanup debug calls - shorten function names - cleanup error exit paths Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 13 +++++++------ drivers/edac/amd64_edac.h | 2 +- 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 8497963a61f..858fe603722 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1269,7 +1269,7 @@ static int f10_early_channel_count(struct amd64_pvt *pvt) if (channels == 0) channels = 1; - debugf0("DIMM count= %d\n", channels); + debugf0("MCT channel count: %d\n", channels); return channels; @@ -3056,7 +3056,7 @@ static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl, if (!pvt) goto err_exit; - pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl); + pvt->mc_node_id = get_node_id(dram_f2_ctl); pvt->dram_f2_ctl = dram_f2_ctl; pvt->ext_model = boot_cpu_data.x86_model >> 4; @@ -3183,8 +3183,7 @@ static int __devinit amd64_init_one_instance(struct pci_dev *pdev, { int ret = 0; - debugf0("(MC node=%d,mc_type='%s')\n", - get_mc_node_id_from_pdev(pdev), + debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev), get_amd_family_name(mc_type->driver_data)); ret = pci_enable_device(pdev); @@ -3323,15 +3322,17 @@ static int __init amd64_edac_init(void) err = amd64_init_2nd_stage(pvt_lookup[nb]); if (err) - goto err_exit; + goto err_2nd_stage; } amd64_setup_pci_device(); return 0; +err_2nd_stage: + debugf0("2nd stage failed\n"); + err_exit: - debugf0("'finish_setup' stage failed\n"); pci_unregister_driver(&amd64_pci_driver); return err; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index a159957e167..ba73015af8e 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -444,7 +444,7 @@ enum { #define K8_MSR_MC4ADDR 0x0412 /* AMD sets the first MC device at device ID 0x18. */ -static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev) +static inline int get_node_id(struct pci_dev *pdev) { return PCI_SLOT(pdev->devfn) - 0x18; } -- cgit v1.2.3 From 39562e783928e3ea9ee2cbce99a756ab48d3c06a Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 26 Jun 2009 16:30:43 +0200 Subject: [SCSI] FC transport: Locking fix for common-code FC pass-through patch Fix this: ------------[ cut here ]------------ Badness at block/blk-core.c:244 CPU: 0 Tainted: G W 2.6.31-rc1-00004-gd3a263a #3 Process zfcp_wq (pid: 901, task: 000000002fb7a038, ksp: 000000002f02bc78) Krnl PSW : 0704300180000000 00000000002141ba (blk_remove_plug+0xb2/0xb8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:3 PM:0 EA:3 Krnl GPRS: 0000000000000001 0000000000000001 0000000022811440 0000000022811798 000000000027ff4e 0000000000000000 0000000000000000 000000002f00f000 070000000006a0f4 000000002af70000 000000002af2a800 00000000228d1c00 0000000022811440 000000000050c708 000000002f02bca8 000000002f02bc80 Krnl Code: 00000000002141b0: b9140022 lgfr %r2,%r2 00000000002141b4: 07fe bcr 15,%r14 00000000002141b6: a7f40001 brc 15,2141b8 >00000000002141ba: a7f4ffbe brc 15,214136 00000000002141be: 0707 bcr 0,%r7 00000000002141c0: ebaff0680024 stmg %r10,%r15,104(%r15) 00000000002141c6: c0d00017c2a9 larl %r13,50c718 00000000002141cc: a7f13fc0 tmll %r15,16320 Call Trace: ([<000000000050e7d8>] C.272.16122+0x88/0x110) [<00000000002141ec>] __blk_run_queue+0x2c/0x154 [<000000000028013a>] fc_remote_port_add+0x85e/0x95c [<000000000037596e>] zfcp_scsi_rport_work+0xe6/0x148 [<000000000006908c>] worker_thread+0x25c/0x318 [<000000000006f10c>] kthread+0x94/0x9c [<000000000001c2b2>] kernel_thread_starter+0x6/0xc [<000000000001c2ac>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000002141b6>] blk_remove_plug+0xae/0xb8 The FC pass-through support triggers the WARN_ON(!irqs_disabled()) in blk_plug_device. Since blk_plug_device requires being called with disabled interrupts, use spin_lock_irqsave in fc_bsg_goose_queue to disable the interrupts before calling into the block layer. Signed-off-by: Christof Schmitt Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 2eee9e6e4fe..292c02f810d 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3670,13 +3670,14 @@ static void fc_bsg_goose_queue(struct fc_rport *rport) { int flagset; + unsigned long flags; if (!rport->rqst_q) return; get_device(&rport->dev); - spin_lock(rport->rqst_q->queue_lock); + spin_lock_irqsave(rport->rqst_q->queue_lock, flags); flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) && !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags); if (flagset) @@ -3684,7 +3685,7 @@ fc_bsg_goose_queue(struct fc_rport *rport) __blk_run_queue(rport->rqst_q); if (flagset) queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q); - spin_unlock(rport->rqst_q->queue_lock); + spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags); put_device(&rport->dev); } -- cgit v1.2.3 From 89bb871e96cdc3d78b7f69f0bacc94b21bbaccfd Mon Sep 17 00:00:00 2001 From: "Steven A. Falco" Date: Fri, 26 Jun 2009 12:42:47 -0400 Subject: mtd: m25p80 timeout too short for worst-case m25p16 devices The m25p16 data sheet from numonyx lists the worst-case bulk erase time (tBE) as 40 seconds. Signed-off-by: Steven A. Falco Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 59c46126a5c..ae5fe91867e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -54,7 +54,7 @@ #define SR_SRWD 0x80 /* SR write protect */ /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */ +#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ #define CMD_SIZE 4 #ifdef CONFIG_M25PXX_USE_FAST_READ -- cgit v1.2.3 From 9c72ebef5aabf3532469d602a9d87beceea268b1 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 26 Jun 2009 11:22:37 -0700 Subject: ide-cd: handle fragmented packet commands gracefully There are some devices in the wild that clear the DRQ bit during the last word of a packet command and therefore could use a "second chance" for that last word of data to be xferred instead of simply failing the request. Do that by attempting to suck in those last bytes in PIO mode. In addition, the ATA_ERR bit has to be cleared for we cannot be sure the data is valid otherwise. See http://bugzilla.kernel.org/show_bug.cgi?id=13399 for details. Signed-off-by: Borislav Petkov Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-cd.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index f0ede5953af..6a9a769bffc 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -592,9 +592,19 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) } } else if (!blk_pc_request(rq)) { ide_cd_request_sense_fixup(drive, cmd); - /* complain if we still have data left to transfer */ + uptodate = cmd->nleft ? 0 : 1; - if (uptodate == 0) + + /* + * suck out the remaining bytes from the drive in an + * attempt to complete the data xfer. (see BZ#13399) + */ + if (!(stat & ATA_ERR) && !uptodate && thislen) { + ide_pio_bytes(drive, cmd, write, thislen); + uptodate = cmd->nleft ? 0 : 1; + } + + if (!uptodate) rq->cmd_flags |= REQ_FAILED; } goto out_end; -- cgit v1.2.3 From 112942353992d95099fb5b71c679ff1046fccfcf Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 19 Jun 2009 03:40:26 -0400 Subject: kbuild: finally remove the obsolete variable $TOPDIR TOPDIR is obsolete, it can be finally removed now. Signed-off-by: WANG Cong Signed-off-by: Sam Ravnborg --- drivers/scsi/cxgb3i/Kbuild | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild index 25a2032bfa2..70d060b7ff4 100644 --- a/drivers/scsi/cxgb3i/Kbuild +++ b/drivers/scsi/cxgb3i/Kbuild @@ -1,4 +1,4 @@ -EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3 +EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3 cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o cxgb3i_ddp.o obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o -- cgit v1.2.3 From 70ec3bb8ea3f8c55b255f41d122c7d4d8c0d00b4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 27 Jun 2009 09:55:32 +0200 Subject: mtd: Use BLOCK_NIL consistently in NFTL/INFTL Use BLOCK_NIL consistently rather than sometimes 0xffff and sometimes BLOCK_NIL. The semantic patch that finds this issue is below (http://www.emn.fr/x-info/coccinelle/). On the other hand, the changes were made by hand, in part because drivers/mtd/inftlcore.c contains dead code that causes spatch to ignore a relevant function. Specifically, the function INFTL_findwriteunit contains a do-while loop, but always takes a return that leaves the loop on the first iteration. // @r exists@ identifier f,C; @@ f(...) { ... return C; } @s@ identifier r.C; expression E; @@ @@ identifier r.f,r.C,I; expression s.E; @@ f(...) { <... ( I | - E + C ) ...> } // Signed-off-by: Julia Lawall Signed-off-by: David Woodhouse --- drivers/mtd/inftlcore.c | 11 ++++++----- drivers/mtd/nftlcore.c | 16 ++++++++-------- 2 files changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 73f05227dc8..d8cf29c01cc 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -226,7 +226,7 @@ static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate) if (!desperate && inftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free " "EUNs (%d)\n", inftl->numfreeEUNs); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -281,7 +281,8 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned silly = MAX_LOOPS; while (thisEUN < inftl->nb_blocks) { for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) { - if ((BlockMap[block] != 0xffff) || BlockDeleted[block]) + if ((BlockMap[block] != BLOCK_NIL) || + BlockDeleted[block]) continue; if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) @@ -525,7 +526,7 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block) if (!silly--) { printk(KERN_WARNING "INFTL: infinite loop in " "Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -549,7 +550,7 @@ hitused: * waiting to be picked up. We're going to have to fold * a chain to make room. */ - thisEUN = INFTL_makefreeblock(inftl, 0xffff); + thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL); /* * Hopefully we free something, lets try again. @@ -631,7 +632,7 @@ hitused: printk(KERN_WARNING "INFTL: error folding to make room for Virtual " "Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index e3f8495a94c..fb86cacd5bd 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -208,7 +208,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) /* Normally, we force a fold to happen before we run out of free blocks completely */ if (!desperate && nftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n"); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -230,11 +230,11 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) printk("Argh! No free blocks found! LastFreeEUN = %d, " "FirstEUN = %d\n", nftl->LastFreeEUN, le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN)); - return 0xffff; + return BLOCK_NIL; } } while (pot != nftl->LastFreeEUN); - return 0xffff; + return BLOCK_NIL; } static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock ) @@ -431,7 +431,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p /* add the header so that it is now a valid chain */ oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); - oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; + oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = BLOCK_NIL; nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8, 8, &retlen, (char *)&oob.u); @@ -515,7 +515,7 @@ static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) if (ChainLength < 2) { printk(KERN_WARNING "No Virtual Unit Chains available for folding. " "Failing request\n"); - return 0xffff; + return BLOCK_NIL; } return NFTL_foldchain (nftl, LongestChain, pendingblock); @@ -578,7 +578,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -601,7 +601,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) //u16 startEUN = nftl->EUNtable[thisVUC]; //printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC); - writeEUN = NFTL_makefreeblock(nftl, 0xffff); + writeEUN = NFTL_makefreeblock(nftl, BLOCK_NIL); if (writeEUN == BLOCK_NIL) { /* OK, we accept that the above comment is @@ -673,7 +673,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, -- cgit v1.2.3 From a222ad1a4b2e3ca177a538482c99c519c1ce94d1 Mon Sep 17 00:00:00 2001 From: Karen Xie Date: Fri, 26 Jun 2009 15:17:29 -0700 Subject: [SCSI] cxgb3i: fix connection error when vlan is enabled There is a bug when VLAN is configured on the cxgb3 interface, the iscsi conn. would be denied with message "cxgb3i: NOT going through cxgbi device." This patch adds code to get the real egress net_device when vlan is configured. Signed-off-by: Karen Xie Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/cxgb3i/cxgb3i_iscsi.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index 74369a3f963..c399f485aa7 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -13,6 +13,7 @@ #include #include +#include #include #include #include @@ -184,6 +185,9 @@ static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev) struct cxgb3i_adapter *snic; int i; + if (ndev->priv_flags & IFF_802_1Q_VLAN) + ndev = vlan_dev_real_dev(ndev); + read_lock(&cxgb3i_snic_rwlock); list_for_each_entry(snic, &cxgb3i_snic_list, list_head) { for (i = 0; i < snic->hba_cnt; i++) { -- cgit v1.2.3 From c276aca46d26aa2347320096f8ecdf5016795c14 Mon Sep 17 00:00:00 2001 From: vimal singh Date: Sat, 27 Jun 2009 11:07:06 +0530 Subject: mtd: nand: fix build failure and incorrect return from omap_wait() We need to include jiffies.h manually in some cases, and the status returned from omap_wait() was broken in two separate ways. Also add cond_resched() to the loop. Signed-off-by: Vimal Singh Signed-off-by: David Woodhouse --- drivers/mtd/nand/omap2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 0cd76f89f4b..ebd07e95b81 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include #include #include @@ -541,7 +543,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); unsigned long timeo = jiffies; - int status, state = this->state; + int status = NAND_STATUS_FAIL, state = this->state; if (state == FL_ERASING) timeo += (HZ * 400) / 1000; @@ -556,8 +558,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) while (time_before(jiffies, timeo)) { status = __raw_readb(this->IO_ADDR_R); - if (!(status & 0x40)) + if (status & NAND_STATUS_READY) break; + cond_resched(); } return status; } -- cgit v1.2.3 From 9230ccb1071d2d7e4ecb6314e67203b9f7f08140 Mon Sep 17 00:00:00 2001 From: Yan Li Date: Sun, 28 Jun 2009 22:30:56 -0700 Subject: Input: i8042 - more reset quirks for MSI Wind-clone netbooks When testing Moblin on various netbooks, we've got reports that many MSI Wind clones need the i8042 reset quirks for the keyboard and/or touchpad's proper function. Signed-off-by: Yan Li Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index fb8a3cd3ffd..924e8ed7f2c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -392,6 +392,34 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), }, }, + { + .ident = "Acer Aspire One 150", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), + }, + }, + { + .ident = "Advent 4211", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"), + DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"), + }, + }, + { + .ident = "Medion Akoya Mini E1210", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E1210"), + }, + }, + { + .ident = "Mivvy M310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"), + DMI_MATCH(DMI_PRODUCT_NAME, "N10"), + }, + }, { } }; -- cgit v1.2.3 From c413ec446188ae53276eb60a60311b430448c6b0 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sun, 28 Jun 2009 22:50:58 -0700 Subject: Input: wacom - add DTF720a support and fix rotation on Intuos3 This patch adds DTF720a support and fixes an Intuos3 rotation pen out-proximity bug. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 38bf86384ae..c896d6a21b7 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -384,6 +384,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS2, 0); wacom_report_key(wcombo, BTN_TOUCH, 0); wacom_report_abs(wcombo, ABS_WHEEL, 0); + if (wacom->features->type >= INTUOS3S) + wacom_report_abs(wcombo, ABS_Z, 0); } wacom_report_key(wcombo, wacom->tool[idx], 0); wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ @@ -836,6 +838,7 @@ static struct wacom_features wacom_features[] = { { "Wacom DTU710", 8, 34080, 27660, 511, 0, PL }, { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, + { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL }, { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, @@ -897,8 +900,9 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, -- cgit v1.2.3 From 00b8ac409cad653137f087e3ff69c020174cbc15 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 28 Jun 2009 22:30:56 -0700 Subject: Input: dm355evm_keys - fix kconfig symbol names The keypad driver for the DM355 EVM got slightly broken as it merged, since it moved from input/keyboard to input/misc and its Kconfig symbol changed. This patch copes with the changed Kconfig symbol. Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov --- drivers/mfd/dm355evm_msp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 7ac12cb0be4..5b6e58a3ba4 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -32,8 +32,7 @@ * This driver was tested with firmware revision A4. */ -#if defined(CONFIG_KEYBOARD_DM355EVM) \ - || defined(CONFIG_KEYBOARD_DM355EVM_MODULE) +#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE) #define msp_has_keyboard() true #else #define msp_has_keyboard() false -- cgit v1.2.3 From ca865a77b5949f5c403e0f13de5a5a9cd499a11e Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Sun, 28 Jun 2009 22:38:44 -0700 Subject: Input: gpio-keys - revert 'change timer to workqueue' This reverts commit 0b346838c5862bfe911432956a106d602535d030. This commit breaks GPIO debouncing by replacing the original mod_timer with schedule_delayed_work in the interrupt handler. The latter does not kick the timer further on GPIO line changes as it should to perform debouncing. Signed-off-by: Jani Nikula Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 2157cd7de00..9767213b6c8 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -22,14 +22,13 @@ #include #include #include -#include #include struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; - struct delayed_work work; + struct timer_list timer; }; struct gpio_keys_drvdata { @@ -37,10 +36,8 @@ struct gpio_keys_drvdata { struct gpio_button_data data[0]; }; -static void gpio_keys_report_event(struct work_struct *work) +static void gpio_keys_report_event(struct gpio_button_data *bdata) { - struct gpio_button_data *bdata = - container_of(work, struct gpio_button_data, work.work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -50,17 +47,25 @@ static void gpio_keys_report_event(struct work_struct *work) input_sync(input); } +static void gpio_check_button(unsigned long _data) +{ + struct gpio_button_data *data = (struct gpio_button_data *)_data; + + gpio_keys_report_event(data); +} + static irqreturn_t gpio_keys_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; struct gpio_keys_button *button = bdata->button; - unsigned long delay; BUG_ON(irq != gpio_to_irq(button->gpio)); - delay = button->debounce_interval ? - msecs_to_jiffies(button->debounce_interval) : 0; - schedule_delayed_work(&bdata->work, delay); + if (button->debounce_interval) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(button->debounce_interval)); + else + gpio_keys_report_event(bdata); return IRQ_HANDLED; } @@ -107,7 +112,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; - INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event); + setup_timer(&bdata->timer, + gpio_check_button, (unsigned long)bdata); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -166,7 +172,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail2: while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); gpio_free(pdata->buttons[i].gpio); } @@ -190,7 +197,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); gpio_free(pdata->buttons[i].gpio); } -- cgit v1.2.3 From da0d03fe6cecde837f113a8a587f5a872d0fade0 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Sun, 28 Jun 2009 22:38:56 -0700 Subject: Input: gpio-keys - avoid possibility of sleeping in timer function The gpio_get_value function may sleep, so it should not be called in a timer function. Move gpio_get_value calls to workqueue. Signed-off-by: Jani Nikula Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 9767213b6c8..efed0c9e242 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -22,6 +22,7 @@ #include #include #include +#include #include @@ -29,6 +30,7 @@ struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; struct timer_list timer; + struct work_struct work; }; struct gpio_keys_drvdata { @@ -36,8 +38,10 @@ struct gpio_keys_drvdata { struct gpio_button_data data[0]; }; -static void gpio_keys_report_event(struct gpio_button_data *bdata) +static void gpio_keys_report_event(struct work_struct *work) { + struct gpio_button_data *bdata = + container_of(work, struct gpio_button_data, work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -47,11 +51,11 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata) input_sync(input); } -static void gpio_check_button(unsigned long _data) +static void gpio_keys_timer(unsigned long _data) { struct gpio_button_data *data = (struct gpio_button_data *)_data; - gpio_keys_report_event(data); + schedule_work(&data->work); } static irqreturn_t gpio_keys_isr(int irq, void *dev_id) @@ -65,7 +69,7 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id) mod_timer(&bdata->timer, jiffies + msecs_to_jiffies(button->debounce_interval)); else - gpio_keys_report_event(bdata); + schedule_work(&bdata->work); return IRQ_HANDLED; } @@ -113,7 +117,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; setup_timer(&bdata->timer, - gpio_check_button, (unsigned long)bdata); + gpio_keys_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, gpio_keys_report_event); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -174,6 +179,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); if (pdata->buttons[i].debounce_interval) del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } @@ -199,6 +205,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) free_irq(irq, &ddata->data[i]); if (pdata->buttons[i].debounce_interval) del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } -- cgit v1.2.3 From cb589529f74d69abc111887b45308f333f950ade Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 29 Jun 2009 00:00:52 -0700 Subject: Input: arrange keyboards alphabetically Hopefully it will reduce conflicts when merging patches. Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 291 ++++++++++++++++++++-------------------- drivers/input/keyboard/Makefile | 32 ++--- 2 files changed, 161 insertions(+), 162 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9d8f796c674..d2df1030675 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" + depends on MACH_AAED2000 + select INPUT_POLLDEV + default y + help + Say Y here to enable the keyboard on the Agilent AAED-2000 + development board. + + To compile this driver as a module, choose M here: the + module will be called aaed2000_kbd. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + config KEYBOARD_ATKBD tristate "AT keyboard" if EMBEDDED || !X86 default y @@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config KEYBOARD_SUNKBD - tristate "Sun Type 4 and Type 5 keyboard" - select SERIO - help - Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, - connected either to the Sun keyboard connector or to an serial - (RS-232) port via a simple adapter. - - To compile this driver as a module, choose M here: the - module will be called sunkbd. - -config KEYBOARD_LKKBD - tristate "DECstation/VAXstation LK201/LK401 keyboard" - select SERIO - help - Say Y here if you want to use a LK201 or LK401 style serial - keyboard. This keyboard is also useable on PCs if you attach - it with the inputattach program. The connector pinout is - described within lkkbd.c. - - To compile this driver as a module, choose M here: the - module will be called lkkbd. - -config KEYBOARD_LOCOMO - tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO && INPUT_KEYBOARD - help - Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA - - To compile this driver as a module, choose M here: the - module will be called locomokbd. - -config KEYBOARD_XTKBD - tristate "XT keyboard" - select SERIO - help - Say Y here if you want to use the old IBM PC/XT keyboard (or - compatible) on your system. This is only possible with a - parallel port keyboard adapter, you cannot connect it to the - keyboard port on a PC that runs Linux. - - To compile this driver as a module, choose M here: the - module will be called xtkbd. - -config KEYBOARD_NEWTON - tristate "Newton keyboard" - select SERIO - help - Say Y here if you have a Newton keyboard on a serial port. - - To compile this driver as a module, choose M here: the - module will be called newtonkbd. - -config KEYBOARD_STOWAWAY - tristate "Stowaway keyboard" - select SERIO +config KEYBOARD_BFIN + tristate "Blackfin BF54x keypad support" + depends on (BF54x && !BF544) help - Say Y here if you have a Stowaway keyboard on a serial port. - Stowaway compatible keyboards like Dicota Input-PDA keyboard - are also supported by this driver. + Say Y here if you want to use the BF54x keypad. To compile this driver as a module, choose M here: the - module will be called stowaway. + module will be called bf54x-keys. config KEYBOARD_CORGI tristate "Corgi keyboard" @@ -143,61 +124,41 @@ config KEYBOARD_CORGI To compile this driver as a module, choose M here: the module will be called corgikbd. -config KEYBOARD_SPITZ - tristate "Spitz keyboard" - depends on PXA_SHARPSL - default y +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. To compile this driver as a module, choose M here: the - module will be called spitzkbd. + module will be called lkkbd. -config KEYBOARD_TOSA - tristate "Tosa keyboard" - depends on MACH_TOSA - default y +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + Say Y here to enable the matrix keypad on the Cirrus EP93XX. To compile this driver as a module, choose M here: the - module will be called tosakbd. - -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - default n - help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! + module will be called ep93xx_keypad. -config KEYBOARD_AMIGA - tristate "Amiga keyboard" - depends on AMIGA +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GENERIC_GPIO help - Say Y here if you are running Linux on any AMIGA and have a keyboard - attached. - - To compile this driver as a module, choose M here: the - module will be called amikbd. - -config ATARI_KBD_CORE - bool + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). -config KEYBOARD_ATARI - tristate "Atari keyboard" - depends on ATARI - select ATARI_KBD_CORE - help - Say Y here if you are running Linux on any Atari and have a keyboard - attached. + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called atakbd. + module will be called gpio-keys. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -261,14 +222,33 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. -config KEYBOARD_OMAP - tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO help - Say Y here if you want to use the OMAP keypad. + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA To compile this driver as a module, choose M here: the - module will be called omap-keypad. + module will be called locomokbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" @@ -288,51 +268,38 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_AAED2000 - tristate "AAED-2000 keyboard" - depends on MACH_AAED2000 - select INPUT_POLLDEV +config KEYBOARD_SPITZ + tristate "Spitz keyboard" + depends on PXA_SHARPSL default y help - Say Y here to enable the keyboard on the Agilent AAED-2000 - development board. - - To compile this driver as a module, choose M here: the - module will be called aaed2000_kbd. - -config KEYBOARD_GPIO - tristate "GPIO Buttons" - depends on GENERIC_GPIO - help - This driver implements support for buttons connected - to GPIO pins of various CPUs (and some other chips). - - Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific - setup logic must also provide a platform device, - with configuration data saying which GPIOs are used. + Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, + SL-C3000 and Sl-C3100 series of PDAs. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called spitzkbd. -config KEYBOARD_MAPLE - tristate "Maple bus keyboard" - depends on SH_DREAMCAST && MAPLE +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO help - Say Y here if you have a Dreamcast console running Linux and have - a keyboard attached to its Maple bus. + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. To compile this driver as a module, choose M here: the - module will be called maple_keyb. + module will be called stowaway. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO help - Say Y here if you want to use the BF54x keypad. + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. To compile this driver as a module, choose M here: the - module will be called bf54x-keys. + module will be called sunkbd. config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" @@ -344,13 +311,45 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. -config KEYBOARD_EP93XX - tristate "EP93xx Matrix Keypad support" - depends on ARCH_EP93XX +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on (ARCH_OMAP1 || ARCH_OMAP2) help - Say Y here to enable the matrix keypad on the Cirrus EP93XX. + Say Y here if you want to use the OMAP keypad. To compile this driver as a module, choose M here: the - module will be called ep93xx_keypad. + module will be called omap-keypad. + +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 156b647a259..632efbc18c4 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -4,29 +4,29 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o -obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o -obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o -obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o -obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o +obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o +obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o +obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o -obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o -obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o -obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o -obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o -obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o -obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o -- cgit v1.2.3 From bab7614d6d1b1fc96ec6c5a7ca34c8641060e659 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 29 Jun 2009 00:20:52 -0700 Subject: Input: add support for generic GPIO-based matrix keypad Original patch by Marek Vasut, modified by Eric in: 1. use delayed work to simplify the debouncing 2. combine col_polarity/row_polarity into a single active_low field 3. use a generic bit array based XOR algorithm to detect key press/release, which should make the column assertion time shorter and code a bit cleaner 4. remove the ALT_FN handling, which is no way generic, the ALT_FN key should be treated as no different from other keys, and translation will be done by user space by commands like 'loadkeys'. 5. explicitly disable row IRQs and flush potential pending work, and schedule an immediate scan after resuming as suggested by Uli Luckas 6. incorporate review comments from many others Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad controller, I have to configure those pins as generic GPIO to use this driver, works quite well, though), and Sharp Zaurus model SL-C7x0 and SL-C1000. [dtor@mail.ru: fix error unwinding path, support changing keymap from userspace] Signed-off-by: Marek Vasut Reviewed-by: Trilok Soni Reviewed-by: Uli Luckas Reviewed-by: Russell King Reviewed-by: Robert Jarzmik Signed-off-by: Eric Miao Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 13 +- drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/matrix_keypad.c | 453 +++++++++++++++++++++++++++++++++ 3 files changed, 465 insertions(+), 2 deletions(-) create mode 100644 drivers/input/keyboard/matrix_keypad.c (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index d2df1030675..a6b989a9dc0 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -158,7 +158,16 @@ config KEYBOARD_GPIO with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called gpio_keys. + +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GENERIC_GPIO + help + Enable support for GPIO driven matrix keypad. + + To compile this driver as a module, choose M here: the + module will be called matrix_keypad. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -254,7 +263,7 @@ config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx help - Enable support for PXA27x/PXA3xx keypad controller + Enable support for PXA27x/PXA3xx keypad controller. To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 632efbc18c4..b5b5eae9724 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c new file mode 100644 index 00000000000..e9b2e7cb05b --- /dev/null +++ b/drivers/input/keyboard/matrix_keypad.c @@ -0,0 +1,453 @@ +/* + * GPIO driven matrix keyboard driver + * + * Copyright (c) 2008 Marek Vasut + * + * Based on corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct matrix_keypad { + const struct matrix_keypad_platform_data *pdata; + struct input_dev *input_dev; + unsigned short *keycodes; + + uint32_t last_key_state[MATRIX_MAX_COLS]; + struct delayed_work work; + bool scan_pending; + bool stopped; + spinlock_t lock; +}; + +/* + * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause + * minmal side effect when scanning other columns, here it is configured to + * be input, and it should work on most platforms. + */ +static void __activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + bool level_on = !pdata->active_low; + + if (on) { + gpio_direction_output(pdata->col_gpios[col], level_on); + } else { + gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); + gpio_direction_input(pdata->col_gpios[col]); + } +} + +static void activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + __activate_col(pdata, col, on); + + if (on && pdata->col_scan_delay_us) + udelay(pdata->col_scan_delay_us); +} + +static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, + bool on) +{ + int col; + + for (col = 0; col < pdata->num_col_gpios; col++) + __activate_col(pdata, col, on); +} + +static bool row_asserted(const struct matrix_keypad_platform_data *pdata, + int row) +{ + return gpio_get_value_cansleep(pdata->row_gpios[row]) ? + !pdata->active_low : pdata->active_low; +} + +static void enable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); +} + +static void disable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); +} + +/* + * This gets the keys from keyboard and reports it to input subsystem + */ +static void matrix_keypad_scan(struct work_struct *work) +{ + struct matrix_keypad *keypad = + container_of(work, struct matrix_keypad, work.work); + struct input_dev *input_dev = keypad->input_dev; + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + uint32_t new_state[MATRIX_MAX_COLS]; + int row, col, code; + + /* de-activate all columns for scanning */ + activate_all_cols(pdata, false); + + memset(new_state, 0, sizeof(new_state)); + + /* assert each column and read the row status out */ + for (col = 0; col < pdata->num_col_gpios; col++) { + + activate_col(pdata, col, true); + + for (row = 0; row < pdata->num_row_gpios; row++) + new_state[col] |= + row_asserted(pdata, row) ? (1 << row) : 0; + + activate_col(pdata, col, false); + } + + for (col = 0; col < pdata->num_col_gpios; col++) { + uint32_t bits_changed; + + bits_changed = keypad->last_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->num_row_gpios; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = (row << 4) + col; + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad->keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + + memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + + activate_all_cols(pdata, true); + + /* Enable IRQs again */ + spin_lock_irq(&keypad->lock); + keypad->scan_pending = false; + enable_row_irqs(keypad); + spin_unlock_irq(&keypad->lock); +} + +static irqreturn_t matrix_keypad_interrupt(int irq, void *id) +{ + struct matrix_keypad *keypad = id; + unsigned long flags; + + spin_lock_irqsave(&keypad->lock, flags); + + /* + * See if another IRQ beaten us to it and scheduled the + * scan already. In that case we should not try to + * disable IRQs again. + */ + if (unlikely(keypad->scan_pending || keypad->stopped)) + goto out; + + disable_row_irqs(keypad); + keypad->scan_pending = true; + schedule_delayed_work(&keypad->work, + msecs_to_jiffies(keypad->pdata->debounce_ms)); + +out: + spin_unlock_irqrestore(&keypad->lock, flags); + return IRQ_HANDLED; +} + +static int matrix_keypad_start(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = false; + mb(); + + /* + * Schedule an immediate key scan to capture current key state; + * columns will be activated and IRQs be enabled after the scan. + */ + schedule_delayed_work(&keypad->work, 0); + + return 0; +} + +static void matrix_keypad_stop(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = true; + mb(); + flush_work(&keypad->work.work); + /* + * matrix_keypad_scan() will leave IRQs enabled; + * we should disable them now. + */ + disable_row_irqs(keypad); +} + +#ifdef CONFIG_PM +static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + return 0; +} + +static int matrix_keypad_resume(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + matrix_keypad_start(keypad->input_dev); + + return 0; +} +#else +#define matrix_keypad_suspend NULL +#define matrix_keypad_resume NULL +#endif + +static int __devinit init_matrix_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i, err = -EINVAL; + + /* initialized strobe lines as outputs, activated */ + for (i = 0; i < pdata->num_col_gpios; i++) { + err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for COL%d\n", + pdata->col_gpios[i], i); + goto err_free_cols; + } + + gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for ROW%d\n", + pdata->row_gpios[i], i); + goto err_free_rows; + } + + gpio_direction_input(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } + } + + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); + return 0; + +err_free_irqs: + while (--i >= 0) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + i = pdata->num_row_gpios; +err_free_rows: + while (--i >= 0) + gpio_free(pdata->row_gpios[i]); + i = pdata->num_col_gpios; +err_free_cols: + while (--i >= 0) + gpio_free(pdata->col_gpios[i]); + + return err; +} + +static int __devinit matrix_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + const struct matrix_keymap_data *keymap_data; + struct matrix_keypad *keypad; + struct input_dev *input_dev; + unsigned short *keycodes; + int i; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!keymap_data->max_keymap_size) { + dev_err(&pdev->dev, "invalid keymap data supplied\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); + keycodes = kzalloc(keymap_data->max_keymap_size * + sizeof(keypad->keycodes), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !keycodes || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + keypad->input_dev = input_dev; + keypad->pdata = pdata; + keypad->keycodes = keycodes; + keypad->stopped = true; + INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); + spin_lock_init(&keypad->lock); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->open = matrix_keypad_start; + input_dev->close = matrix_keypad_stop; + + input_dev->keycode = keycodes; + input_dev->keycodesize = sizeof(*keycodes); + input_dev->keycodemax = keymap_data->max_keymap_size; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keycodes[(row << 4) + col] = code; + __set_bit(code, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + err = init_matrix_gpio(pdev, keypad); + if (err) + goto err_free_mem; + + err = input_register_device(keypad->input_dev); + if (err) + goto err_free_mem; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_mem: + input_free_device(input_dev); + kfree(keycodes); + kfree(keypad); + return err; +} + +static int __devexit matrix_keypad_remove(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + device_init_wakeup(&pdev->dev, 0); + + for (i = 0; i < pdata->num_row_gpios; i++) { + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + gpio_free(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); + + input_unregister_device(keypad->input_dev); + platform_set_drvdata(pdev, NULL); + kfree(keypad->keycodes); + kfree(keypad); + + return 0; +} + +static struct platform_driver matrix_keypad_driver = { + .probe = matrix_keypad_probe, + .remove = __devexit_p(matrix_keypad_remove), + .suspend = matrix_keypad_suspend, + .resume = matrix_keypad_resume, + .driver = { + .name = "matrix-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init matrix_keypad_init(void) +{ + return platform_driver_register(&matrix_keypad_driver); +} + +static void __exit matrix_keypad_exit(void) +{ + platform_driver_unregister(&matrix_keypad_driver); +} + +module_init(matrix_keypad_init); +module_exit(matrix_keypad_exit); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:matrix-keypad"); -- cgit v1.2.3 From bf92df30df909710c498d05620e2df1be1ef779b Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Mon, 29 Jun 2009 11:31:45 +0800 Subject: intel-iommu: Only avoid flushing device IOTLB for domain ID 0 in caching mode In caching mode, domain ID 0 is reserved for non-present to present mapping flush. Device IOTLB doesn't need to be flushed in this case. Previously we were avoiding the flush for domain zero, even if the IOMMU wasn't in caching mode and domain zero wasn't special. Signed-off-by: Yu Zhao Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 420afa88728..3cad7006ed8 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1054,7 +1054,12 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, else iommu->flush.flush_iotlb(iommu, did, addr, mask, DMA_TLB_PSI_FLUSH); - if (did) + + /* + * In caching mode, domain ID 0 is reserved for non-present to present + * mapping flush. Device IOTLB doesn't need to be flushed in this case. + */ + if (!cap_caching_mode(iommu->cap) || did) iommu_flush_dev_iotlb(iommu->domains[did], addr, mask); } -- cgit v1.2.3 From b213203e475212a69ad6fedfb73464087e317148 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 26 Jun 2009 18:50:28 +0100 Subject: intel-iommu: Create new iommu_domain_identity_map() function We'll want to do this to a _domain_ (the si_domain) rather than a PCI device. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 62 +++++++++++++++++++++++++++-------------------- 1 file changed, 36 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 3cad7006ed8..3a4f347e2f8 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1849,25 +1849,12 @@ error: static int iommu_identity_mapping; -static int iommu_prepare_identity_map(struct pci_dev *pdev, - unsigned long long start, - unsigned long long end) +static int iommu_domain_identity_map(struct dmar_domain *domain, + unsigned long long start, + unsigned long long end) { - struct dmar_domain *domain; unsigned long size; unsigned long long base; - int ret; - - printk(KERN_INFO - "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n", - pci_name(pdev), start, end); - if (iommu_identity_mapping) - domain = si_domain; - else - /* page table init */ - domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); - if (!domain) - return -ENOMEM; /* The address might not be aligned */ base = start & PAGE_MASK; @@ -1876,31 +1863,54 @@ static int iommu_prepare_identity_map(struct pci_dev *pdev, if (!reserve_iova(&domain->iovad, IOVA_PFN(base), IOVA_PFN(base + size) - 1)) { printk(KERN_ERR "IOMMU: reserve iova failed\n"); - ret = -ENOMEM; - goto error; + return -ENOMEM; } - pr_debug("Mapping reserved region %lx@%llx for %s\n", - size, base, pci_name(pdev)); + pr_debug("Mapping reserved region %lx@%llx for domain %d\n", + size, base, domain->id); /* * RMRR range might have overlap with physical memory range, * clear it first */ dma_pte_clear_range(domain, base, base + size); - ret = domain_page_mapping(domain, base, base, size, - DMA_PTE_READ|DMA_PTE_WRITE); + return domain_page_mapping(domain, base, base, size, + DMA_PTE_READ|DMA_PTE_WRITE); +} + +static int iommu_prepare_identity_map(struct pci_dev *pdev, + unsigned long long start, + unsigned long long end) +{ + struct dmar_domain *domain; + int ret; + + printk(KERN_INFO + "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n", + pci_name(pdev), start, end); + + if (iommu_identity_mapping) + domain = si_domain; + else + /* page table init */ + domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); + if (!domain) + return -ENOMEM; + + ret = iommu_domain_identity_map(domain, start, end); if (ret) goto error; /* context entry init */ ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL); - if (!ret) - return 0; -error: + if (ret) + goto error; + + return 0; + + error: domain_exit(domain); return ret; - } static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, -- cgit v1.2.3 From c7ab48d2acaf959e4d59c3f55d12fdb7ca9afd7c Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 26 Jun 2009 19:10:36 +0100 Subject: intel-iommu: Clean up identity mapping code, remove CONFIG_DMAR_GFX_WA There's no need for the GFX workaround now we have 'iommu=pt' for the cases where people really care about performance. There's no need to have a special case for just one type of device. This also speeds up the iommu=pt path and reduces memory usage by setting up the si_domain _once_ and then using it for all devices, rather than giving each device its own private page tables. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 107 ++++++++++++++-------------------------------- 1 file changed, 32 insertions(+), 75 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 3a4f347e2f8..fc121967cb5 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1889,11 +1889,7 @@ static int iommu_prepare_identity_map(struct pci_dev *pdev, "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n", pci_name(pdev), start, end); - if (iommu_identity_mapping) - domain = si_domain; - else - /* page table init */ - domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); + domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); if (!domain) return -ENOMEM; @@ -1922,64 +1918,6 @@ static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, rmrr->end_address + 1); } -struct iommu_prepare_data { - struct pci_dev *pdev; - int ret; -}; - -static int __init iommu_prepare_work_fn(unsigned long start_pfn, - unsigned long end_pfn, void *datax) -{ - struct iommu_prepare_data *data; - - data = (struct iommu_prepare_data *)datax; - - data->ret = iommu_prepare_identity_map(data->pdev, - start_pfn<ret; - -} - -static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev) -{ - int nid; - struct iommu_prepare_data data; - - data.pdev = pdev; - data.ret = 0; - - for_each_online_node(nid) { - work_with_active_regions(nid, iommu_prepare_work_fn, &data); - if (data.ret) - return data.ret; - } - return data.ret; -} - -#ifdef CONFIG_DMAR_GFX_WA -static void __init iommu_prepare_gfx_mapping(void) -{ - struct pci_dev *pdev = NULL; - int ret; - - for_each_pci_dev(pdev) { - if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO || - !IS_GFX_DEVICE(pdev)) - continue; - printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n", - pci_name(pdev)); - ret = iommu_prepare_with_active_regions(pdev); - if (ret) - printk(KERN_ERR "IOMMU: mapping reserved region failed\n"); - } -} -#else /* !CONFIG_DMAR_GFX_WA */ -static inline void iommu_prepare_gfx_mapping(void) -{ - return; -} -#endif - #ifdef CONFIG_DMAR_FLOPPY_WA static inline void iommu_prepare_isa(void) { @@ -1990,12 +1928,12 @@ static inline void iommu_prepare_isa(void) if (!pdev) return; - printk(KERN_INFO "IOMMU: Prepare 0-16M unity mapping for LPC\n"); + printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n"); ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024); if (ret) - printk(KERN_ERR "IOMMU: Failed to create 0-64M identity map, " - "floppy might not work\n"); + printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; " + "floppy might not work\n"); } #else @@ -2023,16 +1961,30 @@ static int __init init_context_pass_through(void) } static int md_domain_init(struct dmar_domain *domain, int guest_width); + +static int __init si_domain_work_fn(unsigned long start_pfn, + unsigned long end_pfn, void *datax) +{ + int *ret = datax; + + *ret = iommu_domain_identity_map(si_domain, + (uint64_t)start_pfn << PAGE_SHIFT, + (uint64_t)end_pfn << PAGE_SHIFT); + return *ret; + +} + static int si_domain_init(void) { struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; - int ret = 0; + int nid, ret = 0; si_domain = alloc_domain(); if (!si_domain) return -EFAULT; + pr_debug("Identity mapping domain is domain %d\n", si_domain->id); for_each_active_iommu(iommu, drhd) { ret = iommu_attach_domain(si_domain, iommu); @@ -2049,6 +2001,12 @@ static int si_domain_init(void) si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY; + for_each_online_node(nid) { + work_with_active_regions(nid, si_domain_work_fn, &ret); + if (ret) + return ret; + } + return 0; } @@ -2102,13 +2060,14 @@ static int iommu_prepare_static_identity_mapping(void) if (ret) return -EFAULT; - printk(KERN_INFO "IOMMU: Setting identity map:\n"); for_each_pci_dev(pdev) { - ret = iommu_prepare_with_active_regions(pdev); - if (ret) { - printk(KERN_INFO "1:1 mapping to one domain failed.\n"); - return -EFAULT; - } + printk(KERN_INFO "IOMMU: identity mapping for device %s\n", + pci_name(pdev)); + + ret = domain_context_mapping(si_domain, pdev, + CONTEXT_TT_MULTI_LEVEL); + if (ret) + return ret; ret = domain_add_dev_info(si_domain, pdev); if (ret) return ret; @@ -2299,8 +2258,6 @@ int __init init_dmars(void) } } - iommu_prepare_gfx_mapping(); - iommu_prepare_isa(); } -- cgit v1.2.3 From dd4e831960e4f0214480fa96a53ca9bb7dd04927 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 16:21:20 +0100 Subject: intel-iommu: Change dma_set_pte_addr() to dma_set_pte_pfn() Add some helpers for converting between VT-d and normal system pfns, since system pages can be larger than VT-d pages. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index fc121967cb5..852f40a913d 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -65,6 +65,26 @@ #define PHYSICAL_PAGE_MASK PAGE_MASK #endif +/* VT-d pages must always be _smaller_ than MM pages. Otherwise things + are never going to work. */ +static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn) +{ + return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT); +} + +static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn) +{ + return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT); +} +static inline unsigned long page_to_dma_pfn(struct page *pg) +{ + return mm_to_dma_pfn(page_to_pfn(pg)); +} +static inline unsigned long virt_to_dma_pfn(void *p) +{ + return page_to_dma_pfn(virt_to_page(p)); +} + /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; @@ -207,9 +227,9 @@ static inline u64 dma_pte_addr(struct dma_pte *pte) return (pte->val & VTD_PAGE_MASK); } -static inline void dma_set_pte_addr(struct dma_pte *pte, u64 addr) +static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn) { - pte->val |= (addr & VTD_PAGE_MASK); + pte->val |= (uint64_t)pfn << VTD_PAGE_SHIFT; } static inline bool dma_pte_present(struct dma_pte *pte) @@ -702,7 +722,7 @@ static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) return NULL; } domain_flush_cache(domain, tmp_page, PAGE_SIZE); - dma_set_pte_addr(pte, virt_to_phys(tmp_page)); + dma_set_pte_pfn(pte, virt_to_dma_pfn(tmp_page)); /* * high level table always sets r/w, last level page * table control read/write @@ -1648,7 +1668,7 @@ domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, * touches the iova range */ BUG_ON(dma_pte_addr(pte)); - dma_set_pte_addr(pte, start_pfn << VTD_PAGE_SHIFT); + dma_set_pte_pfn(pte, start_pfn); dma_set_pte_prot(pte, prot); if (prot & DMA_PTE_SNP) dma_set_pte_snp(pte); -- cgit v1.2.3 From 77dfa56c94d2855a25ff552b74980a5538e129f8 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 16:40:08 +0100 Subject: intel-iommu: Change address_level_offset() to pfn_level_offset() We're shifting the inputs for now, but that'll change... Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 852f40a913d..529c1c13048 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -671,9 +671,9 @@ static inline unsigned int level_to_offset_bits(int level) return (12 + (level - 1) * LEVEL_STRIDE); } -static inline int address_level_offset(u64 addr, int level) +static inline int pfn_level_offset(unsigned long pfn, int level) { - return ((addr >> level_to_offset_bits(level)) & LEVEL_MASK); + return (pfn >> (level_to_offset_bits(level) - 12)) & LEVEL_MASK; } static inline u64 level_mask(int level) @@ -708,7 +708,7 @@ static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) while (level > 0) { void *tmp_page; - offset = address_level_offset(addr, level); + offset = pfn_level_offset(addr >> VTD_PAGE_SHIFT, level); pte = &parent[offset]; if (level == 1) break; @@ -749,7 +749,7 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, parent = domain->pgd; while (level <= total) { - offset = address_level_offset(addr, total); + offset = pfn_level_offset(addr >> VTD_PAGE_SHIFT, total); pte = &parent[offset]; if (level == total) return pte; -- cgit v1.2.3 From 90dcfb5eb2fd427b16135a14f176a6902750b6b4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 17:14:59 +0100 Subject: intel-iommu: Change dma_addr_level_pte() to dma_pfn_level_pte() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 529c1c13048..edd39d348a9 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -740,8 +740,9 @@ static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) } /* return address's pte at specific level */ -static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, - int level) +static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain, + unsigned long pfn, + int level) { struct dma_pte *parent, *pte = NULL; int total = agaw_to_level(domain->agaw); @@ -749,7 +750,7 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, parent = domain->pgd; while (level <= total) { - offset = pfn_level_offset(addr >> VTD_PAGE_SHIFT, total); + offset = pfn_level_offset(pfn, total); pte = &parent[offset]; if (level == total) return pte; @@ -768,7 +769,7 @@ static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr) struct dma_pte *pte = NULL; /* get last level pte */ - pte = dma_addr_level_pte(domain, addr, 1); + pte = dma_pfn_level_pte(domain, addr >> VTD_PAGE_SHIFT, 1); if (pte) { dma_clear_pte(pte); @@ -817,7 +818,8 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, return; while (tmp < end) { - pte = dma_addr_level_pte(domain, tmp, level); + pte = dma_pfn_level_pte(domain, tmp >> VTD_PAGE_SHIFT, + level); if (pte) { free_pgtable_page( phys_to_virt(dma_pte_addr(pte))); -- cgit v1.2.3 From a75f7cf94f01717c5103138319b96752ee2a2be9 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 17:44:39 +0100 Subject: intel-iommu: Make dma_pte_clear_one() take pfn not address Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index edd39d348a9..40eae2097ac 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -764,12 +764,12 @@ static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain, } /* clear one page's page table */ -static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr) +static void dma_pte_clear_one(struct dmar_domain *domain, unsigned long pfn) { struct dma_pte *pte = NULL; /* get last level pte */ - pte = dma_pfn_level_pte(domain, addr >> VTD_PAGE_SHIFT, 1); + pte = dma_pfn_level_pte(domain, pfn, 1); if (pte) { dma_clear_pte(pte); @@ -792,7 +792,7 @@ static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) /* we don't need lock here, nobody else touches the iova range */ while (npages--) { - dma_pte_clear_one(domain, start); + dma_pte_clear_one(domain, start >> VTD_PAGE_SHIFT); start += VTD_PAGE_SIZE; } } -- cgit v1.2.3 From 66eae8469e4e4ba6f4ca7ef82103c78f6d645583 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 19:00:32 +0100 Subject: intel-iommu: Don't just mask out too-big physical addresses; BUG() instead Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 40eae2097ac..ad367f53a2b 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -700,8 +700,7 @@ static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) unsigned long flags; BUG_ON(!domain->pgd); - - addr &= (((u64)1) << addr_width) - 1; + BUG_ON(addr >> addr_width); parent = domain->pgd; spin_lock_irqsave(&domain->mapping_lock, flags); @@ -783,8 +782,9 @@ static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) int addr_width = agaw_to_width(domain->agaw); int npages; - start &= (((u64)1) << addr_width) - 1; - end &= (((u64)1) << addr_width) - 1; + BUG_ON(start >> addr_width); + BUG_ON((end-1) >> addr_width); + /* in case it's partial page */ start &= PAGE_MASK; end = PAGE_ALIGN(end); @@ -807,8 +807,8 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, int level; u64 tmp; - start &= (((u64)1) << addr_width) - 1; - end &= (((u64)1) << addr_width) - 1; + BUG_ON(start >> addr_width); + BUG_ON(end >> addr_width); /* we don't need lock here, nobody else touches the iova range */ level = 2; @@ -1654,7 +1654,7 @@ domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, int index; int addr_width = agaw_to_width(domain->agaw); - hpa &= (((u64)1) << addr_width) - 1; + BUG_ON(hpa >> addr_width); if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; -- cgit v1.2.3 From 04b18e65dd5a3e544f07f4bcfa8fb52704a1833b Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 19:15:01 +0100 Subject: intel-iommu: Make dma_pte_clear_range() use pfns Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index ad367f53a2b..d4217f73715 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -779,21 +779,17 @@ static void dma_pte_clear_one(struct dmar_domain *domain, unsigned long pfn) /* clear last level pte, a tlb flush should be followed */ static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) { - int addr_width = agaw_to_width(domain->agaw); - int npages; - - BUG_ON(start >> addr_width); - BUG_ON((end-1) >> addr_width); + unsigned long start_pfn = IOVA_PFN(start); + unsigned long end_pfn = IOVA_PFN(end-1); + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; - /* in case it's partial page */ - start &= PAGE_MASK; - end = PAGE_ALIGN(end); - npages = (end - start) / VTD_PAGE_SIZE; + BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && end_pfn >> addr_width); - /* we don't need lock here, nobody else touches the iova range */ - while (npages--) { - dma_pte_clear_one(domain, start >> VTD_PAGE_SHIFT); - start += VTD_PAGE_SIZE; + /* we don't need lock here; nobody else touches the iova range */ + while (start_pfn <= end_pfn) { + dma_pte_clear_one(domain, start_pfn); + start_pfn++; } } -- cgit v1.2.3 From 595badf5d65d50300319e6178e6df005ea501f70 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 22:09:11 +0100 Subject: intel-iommu: Make dma_pte_clear_range() take pfns as argument Noting that this is now an _inclusive_ range. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index d4217f73715..ff8b7ce4a01 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -56,6 +56,7 @@ #define MAX_AGAW_WIDTH 64 #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1) +#define DOMAIN_MAX_PFN(gaw) ((((u64)1) << (gaw-VTD_PAGE_SHIFT)) - 1) #define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT) #define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32)) @@ -777,17 +778,17 @@ static void dma_pte_clear_one(struct dmar_domain *domain, unsigned long pfn) } /* clear last level pte, a tlb flush should be followed */ -static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) +static void dma_pte_clear_range(struct dmar_domain *domain, + unsigned long start_pfn, + unsigned long last_pfn) { - unsigned long start_pfn = IOVA_PFN(start); - unsigned long end_pfn = IOVA_PFN(end-1); int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); - BUG_ON(addr_width < BITS_PER_LONG && end_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); /* we don't need lock here; nobody else touches the iova range */ - while (start_pfn <= end_pfn) { + while (start_pfn <= last_pfn) { dma_pte_clear_one(domain, start_pfn); start_pfn++; } @@ -1424,7 +1425,7 @@ static void domain_exit(struct dmar_domain *domain) end = end & (~PAGE_MASK); /* clear ptes */ - dma_pte_clear_range(domain, 0, end); + dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ dma_pte_free_pagetable(domain, 0, end); @@ -1890,7 +1891,8 @@ static int iommu_domain_identity_map(struct dmar_domain *domain, * RMRR range might have overlap with physical memory range, * clear it first */ - dma_pte_clear_range(domain, base, base + size); + dma_pte_clear_range(domain, base >> VTD_PAGE_SHIFT, + (base + size - 1) >> VTD_PAGE_SHIFT); return domain_page_mapping(domain, base, base, size, DMA_PTE_READ|DMA_PTE_WRITE); @@ -2618,7 +2620,8 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, pci_name(pdev), size, (unsigned long long)start_addr); /* clear the whole page */ - dma_pte_clear_range(domain, start_addr, start_addr + size); + dma_pte_clear_range(domain, start_addr >> VTD_PAGE_SHIFT, + (start_addr + size - 1) >> VTD_PAGE_SHIFT); /* free page tables */ dma_pte_free_pagetable(domain, start_addr, start_addr + size); if (intel_iommu_strict) { @@ -2710,7 +2713,8 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, start_addr = iova->pfn_lo << PAGE_SHIFT; /* clear the whole page */ - dma_pte_clear_range(domain, start_addr, start_addr + size); + dma_pte_clear_range(domain, start_addr >> VTD_PAGE_SHIFT, + (start_addr + size - 1) >> VTD_PAGE_SHIFT); /* free page tables */ dma_pte_free_pagetable(domain, start_addr, start_addr + size); @@ -2792,8 +2796,9 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne size, prot); if (ret) { /* clear the page */ - dma_pte_clear_range(domain, start_addr, - start_addr + offset); + dma_pte_clear_range(domain, + start_addr >> VTD_PAGE_SHIFT, + (start_addr + offset - 1) >> VTD_PAGE_SHIFT); /* free page tables */ dma_pte_free_pagetable(domain, start_addr, start_addr + offset); @@ -3382,7 +3387,7 @@ static void vm_domain_exit(struct dmar_domain *domain) end = end & (~VTD_PAGE_MASK); /* clear ptes */ - dma_pte_clear_range(domain, 0, end); + dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ dma_pte_free_pagetable(domain, 0, end); @@ -3526,7 +3531,8 @@ static void intel_iommu_unmap_range(struct iommu_domain *domain, /* The address might not be aligned */ base = iova & VTD_PAGE_MASK; size = VTD_PAGE_ALIGN(size); - dma_pte_clear_range(dmar_domain, base, base + size); + dma_pte_clear_range(dmar_domain, base >> VTD_PAGE_SHIFT, + (base + size - 1) >> VTD_PAGE_SHIFT); if (dmar_domain->max_addr == base + size) dmar_domain->max_addr = base; -- cgit v1.2.3 From 6660c63a79a639b86e3a709e25a8c4fc3ab24770 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 27 Jun 2009 22:41:00 +0100 Subject: intel-iommu: Make dma_pte_free_pagetable() use pfns Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 40 ++++++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index ff8b7ce4a01..1526864a9d6 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -669,27 +669,27 @@ static inline int width_to_agaw(int width) static inline unsigned int level_to_offset_bits(int level) { - return (12 + (level - 1) * LEVEL_STRIDE); + return (level - 1) * LEVEL_STRIDE; } static inline int pfn_level_offset(unsigned long pfn, int level) { - return (pfn >> (level_to_offset_bits(level) - 12)) & LEVEL_MASK; + return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK; } -static inline u64 level_mask(int level) +static inline unsigned long level_mask(int level) { - return ((u64)-1 << level_to_offset_bits(level)); + return -1UL << level_to_offset_bits(level); } -static inline u64 level_size(int level) +static inline unsigned long level_size(int level) { - return ((u64)1 << level_to_offset_bits(level)); + return 1UL << level_to_offset_bits(level); } -static inline u64 align_to_level(u64 addr, int level) +static inline unsigned long align_to_level(unsigned long pfn, int level) { - return ((addr + level_size(level) - 1) & level_mask(level)); + return (pfn + level_size(level) - 1) & level_mask(level); } static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) @@ -798,25 +798,29 @@ static void dma_pte_clear_range(struct dmar_domain *domain, static void dma_pte_free_pagetable(struct dmar_domain *domain, u64 start, u64 end) { - int addr_width = agaw_to_width(domain->agaw); + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + unsigned long start_pfn = start >> VTD_PAGE_SHIFT; + unsigned long last_pfn = (end-1) >> VTD_PAGE_SHIFT; struct dma_pte *pte; int total = agaw_to_level(domain->agaw); int level; - u64 tmp; + unsigned long tmp; - BUG_ON(start >> addr_width); - BUG_ON(end >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); /* we don't need lock here, nobody else touches the iova range */ level = 2; while (level <= total) { - tmp = align_to_level(start, level); - if (tmp >= end || (tmp + level_size(level) > end)) + tmp = align_to_level(start_pfn, level); + + /* Only clear this pte/pmd if we're asked to clear its + _whole_ range */ + if (tmp + level_size(level) - 1 > last_pfn) return; - while (tmp < end) { - pte = dma_pfn_level_pte(domain, tmp >> VTD_PAGE_SHIFT, - level); + while (tmp <= last_pfn) { + pte = dma_pfn_level_pte(domain, tmp, level); if (pte) { free_pgtable_page( phys_to_virt(dma_pte_addr(pte))); @@ -828,7 +832,7 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, level++; } /* free pgd */ - if (start == 0 && end >= ((((u64)1) << addr_width) - 1)) { + if (start == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) { free_pgtable_page(domain->pgd); domain->pgd = NULL; } -- cgit v1.2.3 From d794dc9b302c2781c571c10dedb8094e223d31b8 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 00:27:49 +0100 Subject: intel-iommu: Make dma_pte_free_pagetable() take pfns as argument With some cleanup of intel_unmap_page(), intel_unmap_sg() and vm_domain_exit() to no longer play with 64-bit addresses. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 68 +++++++++++++++++++---------------------------- 1 file changed, 28 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 1526864a9d6..fc593adb049 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -796,11 +796,10 @@ static void dma_pte_clear_range(struct dmar_domain *domain, /* free page table pages. last level pte should already be cleared */ static void dma_pte_free_pagetable(struct dmar_domain *domain, - u64 start, u64 end) + unsigned long start_pfn, + unsigned long last_pfn) { int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; - unsigned long start_pfn = start >> VTD_PAGE_SHIFT; - unsigned long last_pfn = (end-1) >> VTD_PAGE_SHIFT; struct dma_pte *pte; int total = agaw_to_level(domain->agaw); int level; @@ -832,7 +831,7 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, level++; } /* free pgd */ - if (start == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) { + if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) { free_pgtable_page(domain->pgd); domain->pgd = NULL; } @@ -1416,7 +1415,6 @@ static void domain_exit(struct dmar_domain *domain) { struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; - u64 end; /* Domain 0 is reserved, so dont process it */ if (!domain) @@ -1425,14 +1423,12 @@ static void domain_exit(struct dmar_domain *domain) domain_remove_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); - end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~PAGE_MASK); /* clear ptes */ dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ - dma_pte_free_pagetable(domain, 0, end); + dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); for_each_active_iommu(iommu, drhd) if (test_bit(iommu->seq_id, &domain->iommu_bmp)) @@ -2601,7 +2597,7 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, { struct pci_dev *pdev = to_pci_dev(dev); struct dmar_domain *domain; - unsigned long start_addr; + unsigned long start_pfn, last_pfn; struct iova *iova; struct intel_iommu *iommu; @@ -2617,20 +2613,22 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, if (!iova) return; - start_addr = iova->pfn_lo << PAGE_SHIFT; - size = aligned_size((u64)dev_addr, size); + start_pfn = mm_to_dma_pfn(iova->pfn_lo); + last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1; - pr_debug("Device %s unmapping: %zx@%llx\n", - pci_name(pdev), size, (unsigned long long)start_addr); + pr_debug("Device %s unmapping: pfn %lx-%lx\n", + pci_name(pdev), start_pfn, last_pfn); /* clear the whole page */ - dma_pte_clear_range(domain, start_addr >> VTD_PAGE_SHIFT, - (start_addr + size - 1) >> VTD_PAGE_SHIFT); + dma_pte_clear_range(domain, start_pfn, last_pfn); + /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, start_addr + size); + dma_pte_free_pagetable(domain, start_pfn, last_pfn); + if (intel_iommu_strict) { - iommu_flush_iotlb_psi(iommu, domain->id, start_addr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, domain->id, + start_pfn << VTD_PAGE_SHIFT, + last_pfn - start_pfn + 1); /* free iova */ __free_iova(&domain->iovad, iova); } else { @@ -2688,14 +2686,10 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, enum dma_data_direction dir, struct dma_attrs *attrs) { - int i; struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; - unsigned long start_addr; + unsigned long start_pfn, last_pfn; struct iova *iova; - size_t size = 0; - phys_addr_t addr; - struct scatterlist *sg; struct intel_iommu *iommu; if (iommu_no_mapping(pdev)) @@ -2709,21 +2703,19 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, iova = find_iova(&domain->iovad, IOVA_PFN(sglist[0].dma_address)); if (!iova) return; - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size += aligned_size((u64)addr, sg->length); - } - start_addr = iova->pfn_lo << PAGE_SHIFT; + start_pfn = mm_to_dma_pfn(iova->pfn_lo); + last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1; /* clear the whole page */ - dma_pte_clear_range(domain, start_addr >> VTD_PAGE_SHIFT, - (start_addr + size - 1) >> VTD_PAGE_SHIFT); + dma_pte_clear_range(domain, start_pfn, last_pfn); + /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, start_addr + size); + dma_pte_free_pagetable(domain, start_pfn, last_pfn); - iommu_flush_iotlb_psi(iommu, domain->id, start_addr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, domain->id, + start_pfn << VTD_PAGE_SHIFT, + (last_pfn - start_pfn + 1)); /* free iova */ __free_iova(&domain->iovad, iova); @@ -2804,8 +2796,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne start_addr >> VTD_PAGE_SHIFT, (start_addr + offset - 1) >> VTD_PAGE_SHIFT); /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, - start_addr + offset); + dma_pte_free_pagetable(domain, start_addr >> VTD_PAGE_SHIFT, + (start_addr + offset - 1) >> VTD_PAGE_SHIFT); /* free iova */ __free_iova(&domain->iovad, iova); return 0; @@ -3378,8 +3370,6 @@ static void iommu_free_vm_domain(struct dmar_domain *domain) static void vm_domain_exit(struct dmar_domain *domain) { - u64 end; - /* Domain 0 is reserved, so dont process it */ if (!domain) return; @@ -3387,14 +3377,12 @@ static void vm_domain_exit(struct dmar_domain *domain) vm_domain_remove_all_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); - end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~VTD_PAGE_MASK); /* clear ptes */ dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ - dma_pte_free_pagetable(domain, 0, end); + dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); iommu_free_vm_domain(domain); free_domain_mem(domain); -- cgit v1.2.3 From 163cc52ccd2cc5c5ae4e1c886f6fde8547feed2a Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 00:51:17 +0100 Subject: intel-iommu: Clean up intel_iommu_unmap_range() Use unaligned address for domain->max_addr. That algorithm isn't ideal anyway -- we should probably just look at the last iova in the tree. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index fc593adb049..21dc7731186 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -3491,7 +3491,7 @@ static int intel_iommu_map_range(struct iommu_domain *domain, if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping) prot |= DMA_PTE_SNP; - max_addr = (iova & VTD_PAGE_MASK) + VTD_PAGE_ALIGN(size); + max_addr = iova + size; if (dmar_domain->max_addr < max_addr) { int min_agaw; u64 end; @@ -3518,16 +3518,12 @@ static void intel_iommu_unmap_range(struct iommu_domain *domain, unsigned long iova, size_t size) { struct dmar_domain *dmar_domain = domain->priv; - dma_addr_t base; - /* The address might not be aligned */ - base = iova & VTD_PAGE_MASK; - size = VTD_PAGE_ALIGN(size); - dma_pte_clear_range(dmar_domain, base >> VTD_PAGE_SHIFT, - (base + size - 1) >> VTD_PAGE_SHIFT); + dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT, + (iova + size - 1) >> VTD_PAGE_SHIFT); - if (dmar_domain->max_addr == base + size) - dmar_domain->max_addr = base; + if (dmar_domain->max_addr == iova + size) + dmar_domain->max_addr = iova; } static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain, -- cgit v1.2.3 From b026fd28ea23af24a3eea6e5be3f3d0193a8e87d Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 10:37:25 +0100 Subject: intel-iommu: Change addr_to_dma_pte() to pfn_to_dma_pte() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 21dc7731186..dfbabd151a9 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -692,23 +692,24 @@ static inline unsigned long align_to_level(unsigned long pfn, int level) return (pfn + level_size(level) - 1) & level_mask(level); } -static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) +static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, + unsigned long pfn) { - int addr_width = agaw_to_width(domain->agaw); + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; struct dma_pte *parent, *pte = NULL; int level = agaw_to_level(domain->agaw); int offset; unsigned long flags; BUG_ON(!domain->pgd); - BUG_ON(addr >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width); parent = domain->pgd; spin_lock_irqsave(&domain->mapping_lock, flags); while (level > 0) { void *tmp_page; - offset = pfn_level_offset(addr >> VTD_PAGE_SHIFT, level); + offset = pfn_level_offset(pfn, level); pte = &parent[offset]; if (level == 1) break; @@ -1660,7 +1661,7 @@ domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT; index = 0; while (start_pfn < end_pfn) { - pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index); + pte = pfn_to_dma_pte(domain, (iova >> VTD_PAGE_SHIFT) + index); if (!pte) return -ENOMEM; /* We don't need lock here, nobody else @@ -3533,7 +3534,7 @@ static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain, struct dma_pte *pte; u64 phys = 0; - pte = addr_to_dma_pte(dmar_domain, iova); + pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT); if (pte) phys = dma_pte_addr(pte); -- cgit v1.2.3 From 1c5a46ed49e37f56f8aa9000bb1c2ac59670c372 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 10:53:37 +0100 Subject: intel-iommu: Clean up address handling in domain_page_mapping() No more masking and alignment; just use pfns. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index dfbabd151a9..f08d7865fe0 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1647,20 +1647,18 @@ static int domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, u64 hpa, size_t size, int prot) { - u64 start_pfn, end_pfn; + unsigned long start_pfn = hpa >> VTD_PAGE_SHIFT; + unsigned long last_pfn = (hpa + size - 1) >> VTD_PAGE_SHIFT; struct dma_pte *pte; - int index; - int addr_width = agaw_to_width(domain->agaw); + int index = 0; + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; - BUG_ON(hpa >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; - iova &= PAGE_MASK; - start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT; - end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT; - index = 0; - while (start_pfn < end_pfn) { + + while (start_pfn <= last_pfn) { pte = pfn_to_dma_pte(domain, (iova >> VTD_PAGE_SHIFT) + index); if (!pte) return -ENOMEM; -- cgit v1.2.3 From 61df744314079e8cb8cdec75f517cf0e704e41ef Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 11:55:58 +0100 Subject: intel-iommu: Introduce domain_pfn_mapping() ... and use it in the trivial cases; the other callers want individual (and bisectable) attention, since I screwed them up the first time... Make the BUG_ON() happen on too-large virtual address rather than physical address, too. That's the one we care about. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index f08d7865fe0..7540ef91d5f 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1643,40 +1643,48 @@ static int domain_context_mapped(struct pci_dev *pdev) tmp->devfn); } -static int -domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, - u64 hpa, size_t size, int prot) +static int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + unsigned long phys_pfn, unsigned long nr_pages, + int prot) { - unsigned long start_pfn = hpa >> VTD_PAGE_SHIFT; - unsigned long last_pfn = (hpa + size - 1) >> VTD_PAGE_SHIFT; struct dma_pte *pte; - int index = 0; int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; - BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; - while (start_pfn <= last_pfn) { - pte = pfn_to_dma_pte(domain, (iova >> VTD_PAGE_SHIFT) + index); + while (nr_pages--) { + pte = pfn_to_dma_pte(domain, iov_pfn); if (!pte) return -ENOMEM; /* We don't need lock here, nobody else * touches the iova range */ BUG_ON(dma_pte_addr(pte)); - dma_set_pte_pfn(pte, start_pfn); + dma_set_pte_pfn(pte, phys_pfn); dma_set_pte_prot(pte, prot); if (prot & DMA_PTE_SNP) dma_set_pte_snp(pte); domain_flush_cache(domain, pte, sizeof(*pte)); - start_pfn++; - index++; + iov_pfn++; + phys_pfn++; } return 0; } +static int domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, + u64 hpa, size_t size, int prot) +{ + unsigned long first_pfn = hpa >> VTD_PAGE_SHIFT; + unsigned long last_pfn = (hpa + size - 1) >> VTD_PAGE_SHIFT; + + return domain_pfn_mapping(domain, iova >> VTD_PAGE_SHIFT, first_pfn, + last_pfn - first_pfn + 1, prot); + +} + static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn) { if (!iommu) @@ -1893,8 +1901,10 @@ static int iommu_domain_identity_map(struct dmar_domain *domain, dma_pte_clear_range(domain, base >> VTD_PAGE_SHIFT, (base + size - 1) >> VTD_PAGE_SHIFT); - return domain_page_mapping(domain, base, base, size, - DMA_PTE_READ|DMA_PTE_WRITE); + return domain_pfn_mapping(domain, base >> VTD_PAGE_SHIFT, + base >> VTD_PAGE_SHIFT, + size >> VTD_PAGE_SHIFT, + DMA_PTE_READ|DMA_PTE_WRITE); } static int iommu_prepare_identity_map(struct pci_dev *pdev, -- cgit v1.2.3 From 0ab36de274ab094c3992b50c9c48c5c89072ec94 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 14:01:43 +0100 Subject: intel-iommu: Use domain_pfn_mapping() in __intel_map_single() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 7540ef91d5f..dccd0a7b7a5 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2477,14 +2477,12 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, return 0; iommu = domain_get_iommu(domain); - size = aligned_size((u64)paddr, size); + size = aligned_size(paddr, size) >> VTD_PAGE_SHIFT; - iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); + iova = __intel_alloc_iova(hwdev, domain, size << VTD_PAGE_SHIFT, pdev->dma_mask); if (!iova) goto error; - start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; - /* * Check if DMAR supports zero-length reads on write only * mappings.. @@ -2500,20 +2498,20 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, * might have two guest_addr mapping to the same host paddr, but this * is not a big problem */ - ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PHYSICAL_PAGE_MASK, - size, prot); + ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo), + paddr >> VTD_PAGE_SHIFT, size, prot); if (ret) goto error; + start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; + /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_paddr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, 0, start_paddr, size); else iommu_flush_write_buffer(iommu); - return start_paddr + ((u64)paddr & (~PAGE_MASK)); + return start_paddr + (paddr & (~PAGE_MASK)); error: if (iova) -- cgit v1.2.3 From ad05122162b67f64d5a1c6d35e001f7a88619b88 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 14:22:28 +0100 Subject: intel-iommu: Use domain_pfn_mapping() in intel_iommu_map_range() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index dccd0a7b7a5..a490b39ca3d 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -3516,8 +3516,11 @@ static int intel_iommu_map_range(struct iommu_domain *domain, } dmar_domain->max_addr = max_addr; } - - ret = domain_page_mapping(dmar_domain, iova, hpa, size, prot); + /* Round up size to next multiple of PAGE_SIZE, if it and + the low bits of hpa would take us onto the next page */ + size = aligned_size(hpa, size) >> VTD_PAGE_SHIFT; + ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT, + hpa >> VTD_PAGE_SHIFT, size, prot); return ret; } -- cgit v1.2.3 From b536d24d212c994a7d98469ea3a8891573d45fd4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 14:49:31 +0100 Subject: intel-iommu: Clean up intel_map_sg(), remove domain_page_mapping() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 54 +++++++++++++++++------------------------------ 1 file changed, 19 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index a490b39ca3d..bc49b121c66 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1674,17 +1674,6 @@ static int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, return 0; } -static int domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, - u64 hpa, size_t size, int prot) -{ - unsigned long first_pfn = hpa >> VTD_PAGE_SHIFT; - unsigned long last_pfn = (hpa + size - 1) >> VTD_PAGE_SHIFT; - - return domain_pfn_mapping(domain, iova >> VTD_PAGE_SHIFT, first_pfn, - last_pfn - first_pfn + 1, prot); - -} - static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn) { if (!iommu) @@ -2745,17 +2734,16 @@ static int intel_nontranslate_map_sg(struct device *hddev, static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, enum dma_data_direction dir, struct dma_attrs *attrs) { - phys_addr_t addr; int i; struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; size_t size = 0; int prot = 0; - size_t offset = 0; + size_t offset_pfn = 0; struct iova *iova = NULL; int ret; struct scatterlist *sg; - unsigned long start_addr; + unsigned long start_vpfn; struct intel_iommu *iommu; BUG_ON(dir == DMA_NONE); @@ -2768,10 +2756,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne iommu = domain_get_iommu(domain); - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size += aligned_size((u64)addr, sg->length); - } + for_each_sg(sglist, sg, nelems, i) + size += aligned_size(sg->offset, sg->length); iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); if (!iova) { @@ -2789,36 +2775,34 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) prot |= DMA_PTE_WRITE; - start_addr = iova->pfn_lo << PAGE_SHIFT; - offset = 0; + start_vpfn = mm_to_dma_pfn(iova->pfn_lo); + offset_pfn = 0; for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size = aligned_size((u64)addr, sg->length); - ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PHYSICAL_PAGE_MASK, - size, prot); + int nr_pages = aligned_size(sg->offset, sg->length) >> VTD_PAGE_SHIFT; + ret = domain_pfn_mapping(domain, start_vpfn + offset_pfn, + page_to_dma_pfn(sg_page(sg)), + nr_pages, prot); if (ret) { /* clear the page */ - dma_pte_clear_range(domain, - start_addr >> VTD_PAGE_SHIFT, - (start_addr + offset - 1) >> VTD_PAGE_SHIFT); + dma_pte_clear_range(domain, start_vpfn, + start_vpfn + offset_pfn); /* free page tables */ - dma_pte_free_pagetable(domain, start_addr >> VTD_PAGE_SHIFT, - (start_addr + offset - 1) >> VTD_PAGE_SHIFT); + dma_pte_free_pagetable(domain, start_vpfn, + start_vpfn + offset_pfn); /* free iova */ __free_iova(&domain->iovad, iova); return 0; } - sg->dma_address = start_addr + offset + - ((u64)addr & (~PAGE_MASK)); + sg->dma_address = ((dma_addr_t)(start_vpfn + offset_pfn) + << VTD_PAGE_SHIFT) + sg->offset; sg->dma_length = sg->length; - offset += size; + offset_pfn += nr_pages; } /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_addr, - offset >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, 0, start_vpfn << VTD_PAGE_SHIFT, + offset_pfn); else iommu_flush_write_buffer(iommu); -- cgit v1.2.3 From 88cb6a7424d9465faf6caaaadff5af0766c93991 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 15:03:06 +0100 Subject: intel-iommu: Change aligned_size() to aligned_nrpages() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index bc49b121c66..22add36fd73 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2320,11 +2320,13 @@ error: return ret; } -static inline u64 aligned_size(u64 host_addr, size_t size) +static inline unsigned long aligned_nrpages(unsigned long host_addr, + size_t size) { - u64 addr; - addr = (host_addr & (~PAGE_MASK)) + size; - return PAGE_ALIGN(addr); + host_addr &= ~PAGE_MASK; + host_addr += size + PAGE_SIZE - 1; + + return host_addr >> VTD_PAGE_SHIFT; } struct iova * @@ -2466,7 +2468,7 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, return 0; iommu = domain_get_iommu(domain); - size = aligned_size(paddr, size) >> VTD_PAGE_SHIFT; + size = aligned_nrpages(paddr, size); iova = __intel_alloc_iova(hwdev, domain, size << VTD_PAGE_SHIFT, pdev->dma_mask); if (!iova) @@ -2757,9 +2759,10 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne iommu = domain_get_iommu(domain); for_each_sg(sglist, sg, nelems, i) - size += aligned_size(sg->offset, sg->length); + size += aligned_nrpages(sg->offset, sg->length); - iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); + iova = __intel_alloc_iova(hwdev, domain, size << VTD_PAGE_SHIFT, + pdev->dma_mask); if (!iova) { sglist->dma_length = 0; return 0; @@ -2778,7 +2781,7 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne start_vpfn = mm_to_dma_pfn(iova->pfn_lo); offset_pfn = 0; for_each_sg(sglist, sg, nelems, i) { - int nr_pages = aligned_size(sg->offset, sg->length) >> VTD_PAGE_SHIFT; + int nr_pages = aligned_nrpages(sg->offset, sg->length); ret = domain_pfn_mapping(domain, start_vpfn + offset_pfn, page_to_dma_pfn(sg_page(sg)), nr_pages, prot); @@ -3502,7 +3505,7 @@ static int intel_iommu_map_range(struct iommu_domain *domain, } /* Round up size to next multiple of PAGE_SIZE, if it and the low bits of hpa would take us onto the next page */ - size = aligned_size(hpa, size) >> VTD_PAGE_SHIFT; + size = aligned_nrpages(hpa, size); ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT, hpa >> VTD_PAGE_SHIFT, size, prot); return ret; -- cgit v1.2.3 From 03d6a2461ab1704c171ce21081c5022378ef7a91 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 15:33:46 +0100 Subject: intel-iommu: Make iommu_flush_iotlb_psi() take pfn as argument Most of its callers are having to shift for themselves anyway, so we might as well do it in iommu_flush_iotlb_psi(). Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 22add36fd73..6afe44cb681 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1058,11 +1058,11 @@ static void iommu_flush_dev_iotlb(struct dmar_domain *domain, } static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, - u64 addr, unsigned int pages) + unsigned long pfn, unsigned int pages) { unsigned int mask = ilog2(__roundup_pow_of_two(pages)); + uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT; - BUG_ON(addr & (~VTD_PAGE_MASK)); BUG_ON(pages == 0); /* @@ -2494,15 +2494,15 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, if (ret) goto error; - start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; - /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_paddr, size); + iommu_flush_iotlb_psi(iommu, 0, mm_to_dma_pfn(iova->pfn_lo), size); else iommu_flush_write_buffer(iommu); - return start_paddr + (paddr & (~PAGE_MASK)); + start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; + start_paddr += paddr & ~PAGE_MASK; + return start_paddr; error: if (iova) @@ -2624,8 +2624,7 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, dma_pte_free_pagetable(domain, start_pfn, last_pfn); if (intel_iommu_strict) { - iommu_flush_iotlb_psi(iommu, domain->id, - start_pfn << VTD_PAGE_SHIFT, + iommu_flush_iotlb_psi(iommu, domain->id, start_pfn, last_pfn - start_pfn + 1); /* free iova */ __free_iova(&domain->iovad, iova); @@ -2711,8 +2710,7 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, /* free page tables */ dma_pte_free_pagetable(domain, start_pfn, last_pfn); - iommu_flush_iotlb_psi(iommu, domain->id, - start_pfn << VTD_PAGE_SHIFT, + iommu_flush_iotlb_psi(iommu, domain->id, start_pfn, (last_pfn - start_pfn + 1)); /* free iova */ @@ -2804,8 +2802,7 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_vpfn << VTD_PAGE_SHIFT, - offset_pfn); + iommu_flush_iotlb_psi(iommu, 0, start_vpfn, offset_pfn); else iommu_flush_write_buffer(iommu); -- cgit v1.2.3 From 1a4a45516d7a57de0691352d899d7008f2e090d1 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 16:00:42 +0100 Subject: intel-iommu: Remove last use of PHYSICAL_PAGE_MASK, for reserving PCI BARs This is fairly broken anyway -- it doesn't take hotplug into account. We should probably be checking page_is_ram() instead. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 6afe44cb681..a55f5fb06b1 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -62,9 +62,6 @@ #define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32)) #define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64)) -#ifndef PHYSICAL_PAGE_MASK -#define PHYSICAL_PAGE_MASK PAGE_MASK -#endif /* VT-d pages must always be _smaller_ than MM pages. Otherwise things are never going to work. */ @@ -1307,7 +1304,6 @@ static void dmar_init_reserved_ranges(void) struct pci_dev *pdev = NULL; struct iova *iova; int i; - u64 addr, size; init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN); @@ -1330,12 +1326,9 @@ static void dmar_init_reserved_ranges(void) r = &pdev->resource[i]; if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; - addr = r->start; - addr &= PHYSICAL_PAGE_MASK; - size = r->end - addr; - size = PAGE_ALIGN(size); - iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), - IOVA_PFN(size + addr) - 1); + iova = reserve_iova(&reserved_iova_list, + IOVA_PFN(r->start), + IOVA_PFN(r->end)); if (!iova) printk(KERN_ERR "Reserve iova failed\n"); } -- cgit v1.2.3 From c5395d5c4a82159889cb650de93b591ea51d8c56 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 16:35:56 +0100 Subject: intel-iommu: Clean up iommu_domain_identity_map() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index a55f5fb06b1..c5caf7d63a0 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1861,31 +1861,25 @@ static int iommu_domain_identity_map(struct dmar_domain *domain, unsigned long long start, unsigned long long end) { - unsigned long size; - unsigned long long base; + unsigned long first_vpfn = start >> VTD_PAGE_SHIFT; + unsigned long last_vpfn = end >> VTD_PAGE_SHIFT; - /* The address might not be aligned */ - base = start & PAGE_MASK; - size = end - base; - size = PAGE_ALIGN(size); - if (!reserve_iova(&domain->iovad, IOVA_PFN(base), - IOVA_PFN(base + size) - 1)) { + if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn), + dma_to_mm_pfn(last_vpfn))) { printk(KERN_ERR "IOMMU: reserve iova failed\n"); return -ENOMEM; } - pr_debug("Mapping reserved region %lx@%llx for domain %d\n", - size, base, domain->id); + pr_debug("Mapping reserved region %llx-%llx for domain %d\n", + start, end, domain->id); /* * RMRR range might have overlap with physical memory range, * clear it first */ - dma_pte_clear_range(domain, base >> VTD_PAGE_SHIFT, - (base + size - 1) >> VTD_PAGE_SHIFT); + dma_pte_clear_range(domain, first_vpfn, last_vpfn); - return domain_pfn_mapping(domain, base >> VTD_PAGE_SHIFT, - base >> VTD_PAGE_SHIFT, - size >> VTD_PAGE_SHIFT, + return domain_pfn_mapping(domain, first_vpfn, first_vpfn, + last_vpfn - first_vpfn + 1, DMA_PTE_READ|DMA_PTE_WRITE); } -- cgit v1.2.3 From 310a5ab93cb4ce29367238f682affd9ac352f4d0 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 18:52:20 +0100 Subject: intel-iommu: Performance improvement for dma_pte_clear_range() It's a bit silly to repeatedly call domain_flush_cache() for each PTE individually, as we clear it. Instead, batch them up and flush a whole range at a time. We might as well refrain from recalculating the PTE address from scratch each time round the loop too. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index c5caf7d63a0..ba7e37f7111 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -761,34 +761,33 @@ static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain, return NULL; } -/* clear one page's page table */ -static void dma_pte_clear_one(struct dmar_domain *domain, unsigned long pfn) -{ - struct dma_pte *pte = NULL; - - /* get last level pte */ - pte = dma_pfn_level_pte(domain, pfn, 1); - - if (pte) { - dma_clear_pte(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); - } -} - /* clear last level pte, a tlb flush should be followed */ static void dma_pte_clear_range(struct dmar_domain *domain, unsigned long start_pfn, unsigned long last_pfn) { int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + struct dma_pte *first_pte, *pte; BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); /* we don't need lock here; nobody else touches the iova range */ while (start_pfn <= last_pfn) { - dma_pte_clear_one(domain, start_pfn); - start_pfn++; + first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1); + if (!pte) { + start_pfn = align_to_level(start_pfn + 1, 2); + continue; + } + while (start_pfn <= last_pfn && + (unsigned long)pte >> VTD_PAGE_SHIFT == + (unsigned long)first_pte >> VTD_PAGE_SHIFT) { + dma_clear_pte(pte); + start_pfn++; + pte++; + } + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); } } -- cgit v1.2.3 From 6f6a00e40aa3fdd3b29c30e3ef1fc9690506bc03 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 20:38:49 +0100 Subject: intel-iommu: Performance improvement for domain_pfn_mapping() As with dma_pte_clear_range(), don't keep flushing a single PTE at a time. And also micro-optimise the setting of PTE values rather than using the helper functions to do all the masking. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index ba7e37f7111..f8074236bcc 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1639,7 +1639,7 @@ static int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, unsigned long phys_pfn, unsigned long nr_pages, int prot) { - struct dma_pte *pte; + struct dma_pte *first_pte = NULL, *pte = NULL; int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); @@ -1647,19 +1647,27 @@ static int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; + prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP; + while (nr_pages--) { - pte = pfn_to_dma_pte(domain, iov_pfn); - if (!pte) - return -ENOMEM; + if (!pte) { + first_pte = pte = pfn_to_dma_pte(domain, iov_pfn); + if (!pte) + return -ENOMEM; + } /* We don't need lock here, nobody else * touches the iova range */ BUG_ON(dma_pte_addr(pte)); - dma_set_pte_pfn(pte, phys_pfn); - dma_set_pte_prot(pte, prot); - if (prot & DMA_PTE_SNP) - dma_set_pte_snp(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); + pte->val = (phys_pfn << VTD_PAGE_SHIFT) | prot; + pte++; + if (!nr_pages || + (unsigned long)pte >> VTD_PAGE_SHIFT != + (unsigned long)first_pte >> VTD_PAGE_SHIFT) { + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); + pte = NULL; + } iov_pfn++; phys_pfn++; } -- cgit v1.2.3 From 875764de6f0ddb23d270c29357d5a339232a0488 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 28 Jun 2009 21:20:51 +0100 Subject: intel-iommu: Simplify __intel_alloc_iova() There's no need for the separate iommu_alloc_iova() function, and certainly not for it to be global. Remove the underscores while we're at it. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 49 +++++++++++++++++------------------------------ 1 file changed, 18 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index f8074236bcc..11a23201445 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2323,43 +2323,31 @@ static inline unsigned long aligned_nrpages(unsigned long host_addr, return host_addr >> VTD_PAGE_SHIFT; } -struct iova * -iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end) -{ - struct iova *piova; - - /* Make sure it's in range */ - end = min_t(u64, DOMAIN_MAX_ADDR(domain->gaw), end); - if (!size || (IOVA_START_ADDR + size > end)) - return NULL; - - piova = alloc_iova(&domain->iovad, - size >> PAGE_SHIFT, IOVA_PFN(end), 1); - return piova; -} - -static struct iova * -__intel_alloc_iova(struct device *dev, struct dmar_domain *domain, - size_t size, u64 dma_mask) +static struct iova *intel_alloc_iova(struct device *dev, + struct dmar_domain *domain, + unsigned long nrpages, uint64_t dma_mask) { struct pci_dev *pdev = to_pci_dev(dev); struct iova *iova = NULL; - if (dma_mask <= DMA_BIT_MASK(32) || dmar_forcedac) - iova = iommu_alloc_iova(domain, size, dma_mask); - else { + /* Restrict dma_mask to the width that the iommu can handle */ + dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask); + + if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) { /* * First try to allocate an io virtual address in * DMA_BIT_MASK(32) and if that fails then try allocating * from higher range */ - iova = iommu_alloc_iova(domain, size, DMA_BIT_MASK(32)); - if (!iova) - iova = iommu_alloc_iova(domain, size, dma_mask); - } - - if (!iova) { - printk(KERN_ERR"Allocating iova for %s failed", pci_name(pdev)); + iova = alloc_iova(&domain->iovad, nrpages, + IOVA_PFN(DMA_BIT_MASK(32)), 1); + if (iova) + return iova; + } + iova = alloc_iova(&domain->iovad, nrpages, IOVA_PFN(dma_mask), 1); + if (unlikely(!iova)) { + printk(KERN_ERR "Allocating %ld-page iova for %s failed", + nrpages, pci_name(pdev)); return NULL; } @@ -2464,7 +2452,7 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, iommu = domain_get_iommu(domain); size = aligned_nrpages(paddr, size); - iova = __intel_alloc_iova(hwdev, domain, size << VTD_PAGE_SHIFT, pdev->dma_mask); + iova = intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); if (!iova) goto error; @@ -2753,8 +2741,7 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne for_each_sg(sglist, sg, nelems, i) size += aligned_nrpages(sg->offset, sg->length); - iova = __intel_alloc_iova(hwdev, domain, size << VTD_PAGE_SHIFT, - pdev->dma_mask); + iova = intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); if (!iova) { sglist->dma_length = 0; return 0; -- cgit v1.2.3 From aef29bc2603014cb28dfe39bab8d888546fe18e7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 29 Jun 2009 15:21:47 +0100 Subject: tty: Fix the leak in tty_ldisc_release Currently we reinit the ldisc on final tty close which is what the old code did to ensure that if the device retained its termios settings then it had the right ldisc. tty_ldisc_reinit does that but also leaves us with the reset ldisc reference which is then leaked. At this point we know the port will be recycled so we can kill the ldisc off completely rather than try and add another ldisc free up when the kref count hits zero. At this point it is safe to keep the ldisc closed as tty_ldisc waiting methods are only used from the user side, and as the final close we are the last such reference. Interrupt/driver side methods will always use the non wait version and get back a NULL. Found with kmemleak and investigated/identified by Catalin Marinas. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ldisc.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index a19e935847b..913aa8d3f1c 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -867,15 +867,22 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_wait_idle(tty); /* - * Shutdown the current line discipline, and reset it to N_TTY. - * - * FIXME: this MUST get fixed for the new reflocking + * Now kill off the ldisc */ + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + /* Force an oops if we mess this up */ + tty->ldisc = NULL; + + /* Ensure the next open requests the N_TTY ldisc */ + tty_set_termios_ldisc(tty, N_TTY); - tty_ldisc_reinit(tty); /* This will need doing differently if we need to lock */ if (o_tty) tty_ldisc_release(o_tty, NULL); + + /* And the memory resources remaining (buffers, termios) will be + disposed of when the kref hits zero */ } /** -- cgit v1.2.3 From 44b3615b8cb3b016a49eb7ef4236e77a77793cec Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 29 Jun 2009 10:07:54 +0200 Subject: eeepc-laptop: Fix build failure with HOTPLUG_PCI && !SYSFS FYI, there's a post-rc1 build regression with certain configs: drivers/built-in.o: In function `pci_hp_deregister': (.text+0xb166): undefined reference to `pci_hp_remove_module_link' drivers/built-in.o: In function `pci_hp_deregister': (.text+0xb19f): undefined reference to `pci_destroy_slot' drivers/built-in.o: In function `__pci_hp_register': (.text+0xb583): undefined reference to `pci_create_slot' drivers/built-in.o: In function `__pci_hp_register': (.text+0xb5b1): undefined reference to `pci_hp_create_module_link' make: *** [.tmp_vmlinux1] Error 1 Caused by: | 2b121bc262fa03c94e653b2d44356c2f86c1bcdc is first bad commit | commit 2b121bc262fa03c94e653b2d44356c2f86c1bcdc | Date: Thu Jun 25 13:25:36 2009 +0200 | | eeepc-laptop: Register as a pci-hotplug device which changed the driver to use the PCI hotplug infrastructure, but didn't do a good job on the Kconfig rules. Signed-off-by: Ingo Molnar Acked-by: Randy Dunlap Acked-by: Len Brown Signed-off-by: Linus Torvalds --- drivers/platform/x86/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index fee6a4022bc..46dad12f952 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -355,10 +355,9 @@ config EEEPC_LAPTOP depends on INPUT depends on EXPERIMENTAL depends on RFKILL || RFKILL = n + depends on HOTPLUG_PCI select BACKLIGHT_CLASS_DEVICE select HWMON - select HOTPLUG - select HOTPLUG_PCI if PCI ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. -- cgit v1.2.3 From 0d07348931daef854aca8c834a89f1a99ba4ff2b Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 24 Jun 2009 12:08:27 +0900 Subject: PCI MSI: Return if alloc_msi_entry for MSI-X failed In current code it continues setup even if alloc_msi_entry() for MSI-X is failed due to lack of memory. It means arch_setup_msi_irqs() might be called with msi_desc entries less than its argument nvec. At least x86's arch_setup_msi_irqs() uses list_for_each_entry() for dev->msi_list that suspected to have entries same numbers as nvec, and it doesn't check the number of allocated vectors and passed arg nvec. Therefore it will result in success of pci_enable_msix(), with less vectors allocated than requested. This patch fixes the error route to return -ENOMEM, instead of continuing the setup (proposed by Matthew Wilcox). Note that there is no iounmap in msi_free_irqs() if no msi_disc is allocated. Reviewed-by: Matthew Wilcox Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index d9f06fbfa0b..628c14150d4 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -439,8 +439,14 @@ static int msix_capability_init(struct pci_dev *dev, for (i = 0; i < nvec; i++) { entry = alloc_msi_entry(dev); - if (!entry) - break; + if (!entry) { + if (!i) + iounmap(base); + else + msi_free_irqs(dev); + /* No enough memory. Don't try again */ + return -ENOMEM; + } j = entries[i].entry; entry->msi_attrib.is_msix = 1; -- cgit v1.2.3 From 50e5628a4ac465a52f0d4ca6567343be029731a0 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 28 Jun 2009 09:26:40 -0700 Subject: PCI ECRC: Remove unnecessary semicolons Acked-by: Andrew Patterson Signed-off-by: Joe Perches Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/ecrc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c index ece97df4df6..a928d8ab6bd 100644 --- a/drivers/pci/pcie/aer/ecrc.c +++ b/drivers/pci/pcie/aer/ecrc.c @@ -106,7 +106,7 @@ void pcie_set_ecrc_checking(struct pci_dev *dev) disable_ecrc_checking(dev); break; case ECRC_POLICY_ON: - enable_ecrc_checking(dev);; + enable_ecrc_checking(dev); break; default: return; -- cgit v1.2.3 From 654b75e044119bf8e7d773bce41ea039281bbfbe Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Fri, 26 Jun 2009 14:04:46 +0800 Subject: PCI: check if bus has a proper bridge device before triggering SBR For devices attached to the root bus, we can't trigger Secondary Bus Reset because there is no bridge device associated with the bus. So need to check bus->self again NULL first before using it. Reviewed-by: Kenji Kaneshige Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6c93af5ced1..d5d6f5667d8 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2171,7 +2171,7 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) u16 ctrl; struct pci_dev *pdev; - if (dev->subordinate) + if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self) return -ENOTTY; list_for_each_entry(pdev, &dev->bus->devices, bus_list) -- cgit v1.2.3 From 503998ca4a295f7da233689850ba4b9d13cf41e7 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 24 Jun 2009 09:18:14 -0700 Subject: PCI: fix kernel-doc warnings Add documentation for missing parameters in PCI hotplug code. Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pci_hotplug_core.c | 2 ++ drivers/pci/slot.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 844580489d4..5c5043f239c 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -555,6 +555,8 @@ static struct hotplug_slot *get_slot_from_name (const char *name) * @slot: pointer to the &struct hotplug_slot to register * @devnr: device number * @name: name registered with kobject core + * @owner: caller module owner + * @mod_name: caller module name * * Registers a hotplug slot with the pci hotplug subsystem, which will allow * userspace interaction to the slot. diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index eddb0748b0e..8c02b6c53bd 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -311,7 +311,7 @@ EXPORT_SYMBOL_GPL(pci_destroy_slot); #include /** * pci_hp_create_link - create symbolic link to the hotplug driver module. - * @slot: struct pci_slot + * @pci_slot: struct pci_slot * * Helper function for pci_hotplug_core.c to create symbolic link to * the hotplug driver module. @@ -334,7 +334,7 @@ EXPORT_SYMBOL_GPL(pci_hp_create_module_link); /** * pci_hp_remove_link - remove symbolic link to the hotplug driver module. - * @slot: struct pci_slot + * @pci_slot: struct pci_slot * * Helper function for pci_hotplug_core.c to remove symbolic link to * the hotplug driver module. -- cgit v1.2.3 From 7a661c6f1082693a7e9627e9ad2d1546a9337fdc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 24 Jun 2009 16:02:27 +0100 Subject: PCI: More PATA quirks for not entering D3 The ALi loses some state if it goes into D3. Unfortunately even with the chipset documents I can't figure out how to restore some bits of it. The VIA one saves/restores apparently fine but the ACPI _GTM methods break on some platforms if we do this and this causes cable misdetections. These are both effectively regressions as historically nothing matched the devices and then decided not to bind to them. Nowdays something is binding to all sorts of devices and a result they get dumped into D3. Signed-off-by: Alan Cox Acked-by: Jeff Garzik Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 56552d74abe..06b96562396 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1058,6 +1058,11 @@ static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3); +/* ALi loses some register settings that we cannot then restore */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3); +/* VIA comes back fine but we need to keep it alive or ACPI GTM failures + occur when mode detecting */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3); /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. -- cgit v1.2.3 From 2c21fd4b333e4c780a46edcd6d1e85bfc6cdf371 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 23 Jun 2009 17:40:04 +0900 Subject: PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names These names are too long! Drop _OFFSET to save some bytes/lines. Reviewed-by: Matthew Wilcox Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 18 ++++++++---------- drivers/pci/msi.h | 10 +++++----- 2 files changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 628c14150d4..a088fc6f583 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -151,7 +151,7 @@ static void msix_mask_irq(struct msi_desc *desc, u32 flag) { u32 mask_bits = desc->masked; unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET; + PCI_MSIX_ENTRY_VECTOR_CTRL; mask_bits &= ~1; mask_bits |= flag; writel(mask_bits, desc->mask_base + offset); @@ -188,9 +188,9 @@ void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) void __iomem *base = entry->mask_base + entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; - msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); - msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); - msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET); + msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); + msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); + msg->data = readl(base + PCI_MSIX_ENTRY_DATA); } else { struct pci_dev *dev = entry->dev; int pos = entry->msi_attrib.pos; @@ -225,11 +225,9 @@ void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) base = entry->mask_base + entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; - writel(msg->address_lo, - base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); - writel(msg->address_hi, - base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); - writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET); + writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); + writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); + writel(msg->data, base + PCI_MSIX_ENTRY_DATA); } else { struct pci_dev *dev = entry->dev; int pos = entry->msi_attrib.pos; @@ -493,7 +491,7 @@ static int msix_capability_init(struct pci_dev *dev, set_irq_msi(entry->irq, entry); j = entries[i].entry; entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + PCI_MSIX_ENTRY_VECTOR_CTRL); msix_mask_irq(entry, 1); i++; } diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index a0662842550..de27c1cb5a2 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,11 +6,11 @@ #ifndef MSI_H #define MSI_H -#define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4 -#define PCI_MSIX_ENTRY_DATA_OFFSET 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12 +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 #define msi_control_reg(base) (base + PCI_MSI_FLAGS) #define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO) -- cgit v1.2.3 From 7ba1930db02fc3118165338ef4e562869f575583 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 23 Jun 2009 17:39:27 +0900 Subject: PCI MSI: Unmask MSI if setup failed The initial state of mask register of MSI is unmasked. We set it masked before calling arch_setup_msi_irqs(). If arch_setup_msi_irq() fails, it is better to restore the state of the mask register. Reviewed-by: Matthew Wilcox Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index a088fc6f583..9ab4fe8f20a 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -383,6 +383,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) /* Configure MSI capability structure */ ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); if (ret) { + msi_mask_irq(entry, mask, ~mask); msi_free_irqs(dev); return ret; } -- cgit v1.2.3 From 12abb8ba8444f7c9b355bbdd44a6d0839f7a41b6 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 24 Jun 2009 12:08:09 +0900 Subject: PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume There are 2 problems on mask states in suspend/resume. [1]: It is better to restore the mask states of MSI/MSI-X to initial states (MSI is unmasked, MSI-X is masked) when we release the device. The pci_msi_shutdown() does the restoration of mask states for MSI, while the msi_free_irqs() does it for MSI-X. In other words, in the "disable" path both of MSI and MSI-X are handled, but in the "shutdown" path only MSI is handled. MSI: pci_disable_msi() => pci_msi_shutdown() [ mask states for MSI restored ] => msi_set_enable(dev, pos, 0); => msi_free_irqs() MSI-X: pci_disable_msix() => pci_msix_shutdown() => msix_set_enable(dev, 0); => msix_free_all_irqs => msi_free_irqs() [ mask states for MSI-X restored ] This patch moves the masking for MSI-X from msi_free_irqs() to pci_msix_shutdown(). This change has some positive side effects: - It prevents OS from touching mask states before reading preserved bits in the register, which can be happen if msi_free_irqs() is called from error path in msix_capability_init(). - It also prevents touching the register after turning off MSI-X in "disable" path, which can be a problem on some devices. [2]: We have cache of the mask state in msi_desc, which is automatically updated when msi/msix_mask_irq() is called. This cached states are used for the resume. But since what need to be restored in the resume is the states before the shutdown on the suspend, calling msi/msix_mask_irq() from pci_msi/msix_shutdown() is not appropriate. This patch introduces __msi/msix_mask_irq() that do mask as same as msi/msix_mask_irq() but does not update cached state, for use in pci_msi/msix_shutdown(). [updated: get rid of msi/msix_mask_irq_nocache() (proposed by Matthew Wilcox)] Reviewed-by: Matthew Wilcox Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 9ab4fe8f20a..d986afb7032 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -127,17 +127,23 @@ static inline __attribute_const__ u32 msi_enabled_mask(u16 control) * reliably as devices without an INTx disable bit will then generate a * level IRQ which will never be cleared. */ -static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) +static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) { u32 mask_bits = desc->masked; if (!desc->msi_attrib.maskbit) - return; + return 0; mask_bits &= ~mask; mask_bits |= flag; pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits); - desc->masked = mask_bits; + + return mask_bits; +} + +static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) +{ + desc->masked = __msi_mask_irq(desc, mask, flag); } /* @@ -147,7 +153,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) * file. This saves a few milliseconds when initialising devices with lots * of MSI-X interrupts. */ -static void msix_mask_irq(struct msi_desc *desc, u32 flag) +static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag) { u32 mask_bits = desc->masked; unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + @@ -155,7 +161,13 @@ static void msix_mask_irq(struct msi_desc *desc, u32 flag) mask_bits &= ~1; mask_bits |= flag; writel(mask_bits, desc->mask_base + offset); - desc->masked = mask_bits; + + return mask_bits; +} + +static void msix_mask_irq(struct msi_desc *desc, u32 flag) +{ + desc->masked = __msix_mask_irq(desc, flag); } static void msi_set_mask_bit(unsigned irq, u32 flag) @@ -616,9 +628,11 @@ void pci_msi_shutdown(struct pci_dev *dev) pci_intx_for_msi(dev, 1); dev->msi_enabled = 0; + /* Return the device with MSI unmasked as initial states */ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl); mask = msi_capable_mask(ctrl); - msi_mask_irq(desc, mask, ~mask); + /* Keep cached state to be restored */ + __msi_mask_irq(desc, mask, ~mask); /* Restore dev->irq to its default pin-assertion irq */ dev->irq = desc->msi_attrib.default_irq; @@ -658,7 +672,6 @@ static int msi_free_irqs(struct pci_dev* dev) list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { if (entry->msi_attrib.is_msix) { - msix_mask_irq(entry, 1); if (list_is_last(&entry->list, &dev->msi_list)) iounmap(entry->mask_base); } @@ -746,9 +759,17 @@ static void msix_free_all_irqs(struct pci_dev *dev) void pci_msix_shutdown(struct pci_dev* dev) { + struct msi_desc *entry; + if (!pci_msi_enable || !dev || !dev->msix_enabled) return; + /* Return the device with MSI-X masked as initial states */ + list_for_each_entry(entry, &dev->msi_list, list) { + /* Keep cached states to be restored */ + __msix_mask_irq(entry, 1); + } + msix_set_enable(dev, 0); pci_intx_for_msi(dev, 1); dev->msix_enabled = 0; -- cgit v1.2.3 From 2bf427b25b79eb7cea27963a66c3d4684cae0e0c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 29 Jun 2009 19:20:42 -0700 Subject: ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y commit 2f0d0fd2a605666d38e290c5c0d2907484352dc4 ("ide-acpi: cleanup do_drive_get_GTF()") didn't account for the lack of hwif->acpidata check in generic_ide_suspend() [ indirect user of do_drive_get_GTF() through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI support is enabled but ACPI data is unavailable. Fix it by adding ide_port_acpi() helper for checking if port needs ACPI handling and cleaning generic_ide_{suspend,resume}() to use it instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI helpers (this should help in preventing similar bugs in the future). While at it: - kill superfluous debugging printks in ide_acpi_{get,push}_timing() Reported-and-tested-by: Etienne Basset Also-reported-and-tested-by: Jeff Chua Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-acpi.c | 37 +++++++------------------------------ drivers/ide/ide-pm.c | 30 ++++++++++++++++++------------ 2 files changed, 25 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 77f79d26b26..c509c991646 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -92,6 +92,11 @@ int ide_acpi_init(void) return 0; } +bool ide_port_acpi(ide_hwif_t *hwif) +{ + return ide_noacpi == 0 && hwif->acpidata; +} + /** * ide_get_dev_handle - finds acpi_handle and PCI device.function * @dev: device to locate @@ -352,9 +357,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive) unsigned long gtf_address; unsigned long obj_loc; - if (ide_noacpi) - return 0; - DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn); ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc); @@ -389,16 +391,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) struct acpi_buffer output; union acpi_object *out_obj; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Setting up output buffer for _GTM */ output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ @@ -479,16 +471,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif) struct ide_acpi_drive_link *master = &hwif->acpidata->master; struct ide_acpi_drive_link *slave = &hwif->acpidata->slave; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Give the GTM buffer + drive Identify data to the channel via the * _STM method: */ /* setup input parameters buffer for _STM */ @@ -527,16 +509,11 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) ide_drive_t *drive; int i; - if (ide_noacpi || ide_noacpi_psx) + if (ide_noacpi_psx) return; DEBPRINT("ENTER:\n"); - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* channel first and then drives for power on and verse versa for power off */ if (on) acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0); @@ -616,7 +593,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) drive->name, err); } - if (!ide_acpionboot) { + if (ide_noacpi || ide_acpionboot == 0) { DEBPRINT("ACPI methods disabled on boot\n"); return; } diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index c14ca144cff..ad7be2669dc 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -10,9 +10,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) struct request_pm_state rqpm; int ret; - /* call ACPI _GTM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) - ide_acpi_get_timing(hwif); + if (ide_port_acpi(hwif)) { + /* call ACPI _GTM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) + ide_acpi_get_timing(hwif); + } memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); @@ -26,9 +28,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ret = blk_execute_rq(drive->queue, NULL, rq, 0); blk_put_request(rq); - /* call ACPI _PS3 only after both devices are suspended */ - if (ret == 0 && ((drive->dn & 1) || pair == NULL)) - ide_acpi_set_state(hwif, 0); + if (ret == 0 && ide_port_acpi(hwif)) { + /* call ACPI _PS3 only after both devices are suspended */ + if ((drive->dn & 1) || pair == NULL) + ide_acpi_set_state(hwif, 0); + } return ret; } @@ -42,13 +46,15 @@ int generic_ide_resume(struct device *dev) struct request_pm_state rqpm; int err; - /* call ACPI _PS0 / _STM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) { - ide_acpi_set_state(hwif, 1); - ide_acpi_push_timing(hwif); - } + if (ide_port_acpi(hwif)) { + /* call ACPI _PS0 / _STM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) { + ide_acpi_set_state(hwif, 1); + ide_acpi_push_timing(hwif); + } - ide_acpi_exec_tfs(drive); + ide_acpi_exec_tfs(drive); + } memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); -- cgit v1.2.3 From e18ed145c7f556f1de8350c32739bf35b26df705 Mon Sep 17 00:00:00 2001 From: Christian Engelmayer Date: Mon, 29 Jun 2009 19:31:41 -0700 Subject: ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY This patch fixes a memory overrun in function ide_get_identity_ioctl() which chooses the size of a memory buffer depending on the ioctl command that led to the function call, however, passes that buffer to a function which needs the buffer size to be always chosen unconditionally. Due to conditional compilation the memory overrun can only happen on big endian machines. The error can be triggered using ioctl HDIO_OBSOLETE_IDENTITY. Usage of ioctl HDIO_GET_IDENTITY is safe. Signed-off-by: Christian Engelmayer Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-ioctls.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 82f252c3ee6..e246d3d3fbc 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -64,7 +64,8 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd, goto out; } - id = kmalloc(size, GFP_KERNEL); + /* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */ + id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL); if (id == NULL) { rc = -ENOMEM; goto out; -- cgit v1.2.3 From e1605495c716ef4eebdb7606bcd1b593f28e2837 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 29 Jun 2009 11:17:38 +0100 Subject: intel-iommu: Introduce domain_sg_mapping() to speed up intel_map_sg() Instead of calling domain_pfn_mapping() repeatedly with single or small numbers of pages, just pass the sglist in. It can optimise the number of cache flushes like domain_pfn_mapping() does, and gives a huge speedup for large scatterlists. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 83 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 62 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 11a23201445..28bd5f2d78f 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1635,6 +1635,56 @@ static int domain_context_mapped(struct pci_dev *pdev) tmp->devfn); } +static int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + struct scatterlist *sg, unsigned long nr_pages, + int prot) +{ + struct dma_pte *first_pte = NULL, *pte = NULL; + uint64_t pteval; + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + unsigned long sg_res = 0; + + BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); + + if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) + return -EINVAL; + + prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP; + + while (nr_pages--) { + if (!sg_res) { + sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT; + sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset; + sg->dma_length = sg->length; + pteval = page_to_phys(sg_page(sg)) | prot; + } + if (!pte) { + first_pte = pte = pfn_to_dma_pte(domain, iov_pfn); + if (!pte) + return -ENOMEM; + } + /* We don't need lock here, nobody else + * touches the iova range + */ + BUG_ON(dma_pte_addr(pte)); + pte->val = pteval; + pte++; + if (!nr_pages || + (unsigned long)pte >> VTD_PAGE_SHIFT != + (unsigned long)first_pte >> VTD_PAGE_SHIFT) { + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); + pte = NULL; + } + iov_pfn++; + pteval += VTD_PAGE_SIZE; + sg_res--; + if (!sg_res) + sg = sg_next(sg); + } + return 0; +} + static int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, unsigned long phys_pfn, unsigned long nr_pages, int prot) @@ -2758,27 +2808,18 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne prot |= DMA_PTE_WRITE; start_vpfn = mm_to_dma_pfn(iova->pfn_lo); - offset_pfn = 0; - for_each_sg(sglist, sg, nelems, i) { - int nr_pages = aligned_nrpages(sg->offset, sg->length); - ret = domain_pfn_mapping(domain, start_vpfn + offset_pfn, - page_to_dma_pfn(sg_page(sg)), - nr_pages, prot); - if (ret) { - /* clear the page */ - dma_pte_clear_range(domain, start_vpfn, - start_vpfn + offset_pfn); - /* free page tables */ - dma_pte_free_pagetable(domain, start_vpfn, - start_vpfn + offset_pfn); - /* free iova */ - __free_iova(&domain->iovad, iova); - return 0; - } - sg->dma_address = ((dma_addr_t)(start_vpfn + offset_pfn) - << VTD_PAGE_SHIFT) + sg->offset; - sg->dma_length = sg->length; - offset_pfn += nr_pages; + + ret = domain_sg_mapping(domain, start_vpfn, sglist, mm_to_dma_pfn(size), prot); + if (unlikely(ret)) { + /* clear the page */ + dma_pte_clear_range(domain, start_vpfn, + start_vpfn + size - 1); + /* free page tables */ + dma_pte_free_pagetable(domain, start_vpfn, + start_vpfn + size - 1); + /* free iova */ + __free_iova(&domain->iovad, iova); + return 0; } /* it's a non-present to present mapping. Only flush if caching mode */ -- cgit v1.2.3 From 9051aa0268dc1c3e42cd79a802b0af1f2bfcadae Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 29 Jun 2009 12:30:54 +0100 Subject: intel-iommu: Combine domain_pfn_mapping() and domain_sg_mapping() Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 62 +++++++++++++++++------------------------------ 1 file changed, 22 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 28bd5f2d78f..14308533b1c 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1635,14 +1635,14 @@ static int domain_context_mapped(struct pci_dev *pdev) tmp->devfn); } -static int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn, - struct scatterlist *sg, unsigned long nr_pages, - int prot) +static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + struct scatterlist *sg, unsigned long phys_pfn, + unsigned long nr_pages, int prot) { struct dma_pte *first_pte = NULL, *pte = NULL; - uint64_t pteval; + phys_addr_t uninitialized_var(pteval); int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; - unsigned long sg_res = 0; + unsigned long sg_res; BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); @@ -1651,6 +1651,13 @@ static int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn, prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP; + if (sg) + sg_res = 0; + else { + sg_res = nr_pages + 1; + pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot; + } + while (nr_pages--) { if (!sg_res) { sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT; @@ -1685,43 +1692,18 @@ static int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn, return 0; } -static int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, - unsigned long phys_pfn, unsigned long nr_pages, - int prot) +static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + struct scatterlist *sg, unsigned long nr_pages, + int prot) { - struct dma_pte *first_pte = NULL, *pte = NULL; - int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; - - BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); - - if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) - return -EINVAL; - - prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP; + return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot); +} - while (nr_pages--) { - if (!pte) { - first_pte = pte = pfn_to_dma_pte(domain, iov_pfn); - if (!pte) - return -ENOMEM; - } - /* We don't need lock here, nobody else - * touches the iova range - */ - BUG_ON(dma_pte_addr(pte)); - pte->val = (phys_pfn << VTD_PAGE_SHIFT) | prot; - pte++; - if (!nr_pages || - (unsigned long)pte >> VTD_PAGE_SHIFT != - (unsigned long)first_pte >> VTD_PAGE_SHIFT) { - domain_flush_cache(domain, first_pte, - (void *)pte - (void *)first_pte); - pte = NULL; - } - iov_pfn++; - phys_pfn++; - } - return 0; +static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + unsigned long phys_pfn, unsigned long nr_pages, + int prot) +{ + return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot); } static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn) -- cgit v1.2.3 From 1bf20f0dc5629032ddd07617139d9fbca66c1642 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 29 Jun 2009 22:06:43 +0100 Subject: intel-iommu: dump mappings but don't die on pte already set Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 14308533b1c..40ce5a03f18 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1673,7 +1673,16 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, /* We don't need lock here, nobody else * touches the iova range */ - BUG_ON(dma_pte_addr(pte)); + if (unlikely(dma_pte_addr(pte))) { + static int dumps = 5; + printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx)\n", + iov_pfn, pte->val); + if (dumps) { + dumps--; + debug_dma_dump_mappings(NULL); + } + WARN_ON(1); + } pte->val = pteval; pte++; if (!nr_pages || -- cgit v1.2.3 From 3d7b0e4154b4963d6bd39991ec8eaa09caeb3994 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 30 Jun 2009 03:38:09 +0100 Subject: intel-iommu: Don't free too much in dma_pte_free_pagetable() The loop condition was wrong -- we should free a PMD only if its _entire_ range is within the range we're intending to clear. The early-termination condition was right, but not the loop. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 40ce5a03f18..35bdd2a06ca 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -815,7 +815,7 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, if (tmp + level_size(level) - 1 > last_pfn) return; - while (tmp <= last_pfn) { + while (tmp + level_size(level) - 1 <= last_pfn) { pte = dma_pfn_level_pte(domain, tmp, level); if (pte) { free_pgtable_page( -- cgit v1.2.3 From f3a0a52fff4dbfdea2dccc908d00c038481d888e Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 30 Jun 2009 03:40:07 +0100 Subject: intel-iommu: Performance improvement for dma_pte_free_pagetable() As with other functions, batch the CPU data cache flushes and don't keep recalculating PTE addresses. Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 35bdd2a06ca..ec7e032d5ab 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -797,7 +797,7 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, unsigned long last_pfn) { int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; - struct dma_pte *pte; + struct dma_pte *first_pte, *pte; int total = agaw_to_level(domain->agaw); int level; unsigned long tmp; @@ -805,25 +805,32 @@ static void dma_pte_free_pagetable(struct dmar_domain *domain, BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); - /* we don't need lock here, nobody else touches the iova range */ + /* We don't need lock here; nobody else touches the iova range */ level = 2; while (level <= total) { tmp = align_to_level(start_pfn, level); - /* Only clear this pte/pmd if we're asked to clear its - _whole_ range */ + /* If we can't even clear one PTE at this level, we're done */ if (tmp + level_size(level) - 1 > last_pfn) return; while (tmp + level_size(level) - 1 <= last_pfn) { - pte = dma_pfn_level_pte(domain, tmp, level); - if (pte) { - free_pgtable_page( - phys_to_virt(dma_pte_addr(pte))); + first_pte = pte = dma_pfn_level_pte(domain, tmp, level); + if (!pte) { + tmp = align_to_level(tmp + 1, level + 1); + continue; + } + while (tmp + level_size(level) - 1 <= last_pfn && + (unsigned long)pte >> VTD_PAGE_SHIFT == + (unsigned long)first_pte >> VTD_PAGE_SHIFT) { + free_pgtable_page(phys_to_virt(dma_pte_addr(pte))); dma_clear_pte(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); + pte++; + tmp += level_size(level); } - tmp += level_size(level); + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); + } level++; } -- cgit v1.2.3 From 874d2f61d31e596c36af7732dc1b3aa2dc233824 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Tue, 30 Jun 2009 15:18:14 +0100 Subject: dm exception store: really fix type lookup Fix exception store name handling. We need to reference exception store by zero terminated string. Fixes regression introduced in commit f6bd4eb73cdf2a5bf954e497972842f39cabb7e3 Cc: Yi Yang Cc: Jonathan Brassow Cc: stable@kernel.org Cc: Andrew Morton Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-exception-store.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index c3ae51584b1..3710ff88fc1 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -195,7 +195,7 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv, struct dm_exception_store **store) { int r = 0; - struct dm_exception_store_type *type; + struct dm_exception_store_type *type = NULL; struct dm_exception_store *tmp_store; char persistent; @@ -211,12 +211,15 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv, } persistent = toupper(*argv[1]); - if (persistent != 'P' && persistent != 'N') { + if (persistent == 'P') + type = get_type("P"); + else if (persistent == 'N') + type = get_type("N"); + else { ti->error = "Persistent flag is not P or N"; return -EINVAL; } - type = get_type(&persistent); if (!type) { ti->error = "Exception store type not recognised"; r = -EINVAL; -- cgit v1.2.3 From ea9df47cc92573b159ef3b4fda516c32cba9c4fd Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 30 Jun 2009 15:18:17 +0100 Subject: dm table: fix blk_stack_limits arg to use bytes not sectors The offset passed to blk_stack_limits() must be in bytes not sectors. Fixes false warnings like the following: device-mapper: table: 254:1: target device sda6 is misaligned Signed-off-by: Mike Snitzer Reported-by: Frans Pop Tested-by: Frans Pop Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 4899ebe767c..2cba557d9e6 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -495,7 +495,7 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, return 0; } - if (blk_stack_limits(limits, &q->limits, start) < 0) + if (blk_stack_limits(limits, &q->limits, start << 9) < 0) DMWARN("%s: target device %s is misaligned", dm_device_name(ti->table->md), bdevname(bdev, b)); -- cgit v1.2.3 From 04a820ead0838c76e9c1242feb5e71048bf3e9dc Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:14:00 -0400 Subject: olpc_battery: Fix up eeprom read function The eeprom read function was placing values into the wrong place in 'buf'; we were starting from buf[off], rather than buf[0]. Also, the for loop that we were using was much uglier than it needed to be. This cleans it up a bit. Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 5fbca2681ba..9c216dd4155 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -334,21 +335,21 @@ static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { uint8_t ec_byte; - int ret, end; + int ret; + int i; if (off >= EEPROM_SIZE) return 0; if (off + count > EEPROM_SIZE) count = EEPROM_SIZE - off; - end = EEPROM_START + off + count; - for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) { - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, - &buf[ec_byte - EEPROM_START], 1); + for (i = 0; i < count; i++) { + ec_byte = EEPROM_START + off + i; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1); if (ret) { - printk(KERN_ERR "olpc-battery: EC command " - "EC_BAT_EEPROM @ 0x%x failed -" - " %d!\n", ec_byte, ret); + pr_err("olpc-battery: " + "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n", + ec_byte, ret); return -EIO; } } -- cgit v1.2.3 From 8f7e57985fa794ab6afdcd3642581d9e1fe6de31 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:16:17 -0400 Subject: olpc_battery: Ensure that the TRICKLE bit is checked There are times when the battery is present but trickle charging, and the EC sets only the TRICKLE bit. So we must check for the bit when we're checking the charging/present status. Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 9c216dd4155..58e419299cd 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -36,6 +36,7 @@ #define BAT_STAT_AC 0x10 #define BAT_STAT_CHARGING 0x20 #define BAT_STAT_DISCHARGING 0x40 +#define BAT_STAT_TRICKLE 0x80 #define BAT_ERR_INFOFAIL 0x02 #define BAT_ERR_OVERVOLTAGE 0x04 @@ -90,7 +91,7 @@ static char bat_serial[17]; /* Ick */ static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte) { if (olpc_platform_info.ecver > 0x44) { - if (ec_byte & BAT_STAT_CHARGING) + if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE)) val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (ec_byte & BAT_STAT_DISCHARGING) val->intval = POWER_SUPPLY_STATUS_DISCHARGING; @@ -220,7 +221,8 @@ static int olpc_bat_get_property(struct power_supply *psy, It doesn't matter though -- the EC will return the last-known information, and it's as if we just ran that _little_ bit faster and managed to read it out before the battery went away. */ - if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT) + if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) && + psp != POWER_SUPPLY_PROP_PRESENT) return -ENODEV; switch (psp) { @@ -230,7 +232,8 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; break; case POWER_SUPPLY_PROP_PRESENT: - val->intval = !!(ec_byte & BAT_STAT_PRESENT); + val->intval = !!(ec_byte & (BAT_STAT_PRESENT | + BAT_STAT_TRICKLE)); break; case POWER_SUPPLY_PROP_HEALTH: -- cgit v1.2.3 From bfdb46ce8494eae30dbaae65c81e684e6db6228b Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Thu, 18 Jun 2009 11:26:26 +1200 Subject: Add ds2782 battery gas gauge driver This patch adds a driver for ds2782 battery devices. Signed-off-by: Ryan Mallon Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/ds2782_battery.c | 330 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 338 insertions(+) create mode 100644 drivers/power/ds2782_battery.c (limited to 'drivers') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 7eda34838bf..bdbc4f73fcd 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -43,6 +43,13 @@ config BATTERY_DS2760 help Say Y here to enable support for batteries with ds2760 chip. +config BATTERY_DS2782 + tristate "DS2782 standalone gas-gauge" + depends on I2C + help + Say Y here to enable support for the DS2782 standalone battery + gas-gauge. + config BATTERY_PMU tristate "Apple PMU battery" depends on PPC32 && ADB_PMU diff --git a/drivers/power/Makefile b/drivers/power/Makefile index daf3179689a..380d17c9ae2 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER) += apm_power.o obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o +obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c new file mode 100644 index 00000000000..da14f374cb6 --- /dev/null +++ b/drivers/power/ds2782_battery.c @@ -0,0 +1,330 @@ +/* + * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC + * + * Copyright (C) 2009 Bluewater Systems Ltd + * + * Author: Ryan Mallon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */ + +#define DS2782_REG_VOLT_MSB 0x0c +#define DS2782_REG_TEMP_MSB 0x0a +#define DS2782_REG_CURRENT_MSB 0x0e + +/* EEPROM Block */ +#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */ + +/* Current unit measurement in uA for a 1 milli-ohm sense resistor */ +#define DS2782_CURRENT_UNITS 1563 + +#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery) + +struct ds2782_info { + struct i2c_client *client; + struct power_supply battery; + int id; +}; + +static DEFINE_IDR(battery_id); +static DEFINE_MUTEX(battery_lock); + +static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(info->client, reg); + if (ret < 0) { + dev_err(&info->client->dev, "register read failed\n"); + return ret; + } + + *val = ret; + return 0; +} + +static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, + s16 *val) +{ + int ret; + + ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb)); + if (ret < 0) { + dev_err(&info->client->dev, "register read failed\n"); + return ret; + } + + *val = ret; + return 0; +} + +static int ds2782_get_temp(struct ds2782_info *info, int *temp) +{ + s16 raw; + int err; + + /* + * Temperature is measured in units of 0.125 degrees celcius, the + * power_supply class measures temperature in tenths of degrees + * celsius. The temperature value is stored as a 10 bit number, plus + * sign in the upper bits of a 16 bit register. + */ + err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw); + if (err) + return err; + *temp = ((raw / 32) * 125) / 100; + return 0; +} + +static int ds2782_get_current(struct ds2782_info *info, int *current_uA) +{ + int sense_res; + int err; + u8 sense_res_raw; + s16 raw; + + /* + * The units of measurement for current are dependent on the value of + * the sense resistor. + */ + err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); + if (err) + return err; + if (sense_res_raw == 0) { + dev_err(&info->client->dev, "sense resistor value is 0\n"); + return -ENXIO; + } + sense_res = 1000 / sense_res_raw; + + dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n", + sense_res); + err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw); + if (err) + return err; + *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res); + return 0; +} + +static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) +{ + s16 raw; + int err; + + /* + * Voltage is measured in units of 4.88mV. The voltage is stored as + * a 10-bit number plus sign, in the upper bits of a 16-bit register + */ + err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw); + if (err) + return err; + *voltage_uA = (raw / 32) * 4800; + return 0; +} + +static int ds2782_get_capacity(struct ds2782_info *info, int *capacity) +{ + int err; + u8 raw; + + err = ds2782_read_reg(info, DS2782_REG_RARC, &raw); + if (err) + return err; + *capacity = raw; + return raw; +} + +static int ds2782_get_status(struct ds2782_info *info, int *status) +{ + int err; + int current_uA; + int capacity; + + err = ds2782_get_current(info, ¤t_uA); + if (err) + return err; + + err = ds2782_get_capacity(info, &capacity); + if (err) + return err; + + if (capacity == 100) + *status = POWER_SUPPLY_STATUS_FULL; + else if (current_uA == 0) + *status = POWER_SUPPLY_STATUS_NOT_CHARGING; + else if (current_uA < 0) + *status = POWER_SUPPLY_STATUS_DISCHARGING; + else + *status = POWER_SUPPLY_STATUS_CHARGING; + + return 0; +} + +static int ds2782_battery_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct ds2782_info *info = to_ds2782_info(psy); + int ret; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + ret = ds2782_get_status(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_CAPACITY: + ret = ds2782_get_capacity(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = ds2782_get_voltage(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = ds2782_get_current(info, &val->intval); + break; + + case POWER_SUPPLY_PROP_TEMP: + ret = ds2782_get_temp(info, &val->intval); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static enum power_supply_property ds2782_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_TEMP, +}; + +static void ds2782_power_supply_init(struct power_supply *battery) +{ + battery->type = POWER_SUPPLY_TYPE_BATTERY; + battery->properties = ds2782_battery_props; + battery->num_properties = ARRAY_SIZE(ds2782_battery_props); + battery->get_property = ds2782_battery_get_property; + battery->external_power_changed = NULL; +} + +static int ds2782_battery_remove(struct i2c_client *client) +{ + struct ds2782_info *info = i2c_get_clientdata(client); + + power_supply_unregister(&info->battery); + kfree(info->battery.name); + + mutex_lock(&battery_lock); + idr_remove(&battery_id, info->id); + mutex_unlock(&battery_lock); + + i2c_set_clientdata(client, info); + + kfree(info); + return 0; +} + +static int ds2782_battery_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ds2782_info *info; + int ret; + int num; + + /* Get an ID for this battery */ + ret = idr_pre_get(&battery_id, GFP_KERNEL); + if (ret == 0) { + ret = -ENOMEM; + goto fail_id; + } + + mutex_lock(&battery_lock); + ret = idr_get_new(&battery_id, client, &num); + mutex_unlock(&battery_lock); + if (ret < 0) + goto fail_id; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + ret = -ENOMEM; + goto fail_info; + } + + info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num); + if (!info->battery.name) { + ret = -ENOMEM; + goto fail_name; + } + + i2c_set_clientdata(client, info); + info->client = client; + ds2782_power_supply_init(&info->battery); + + ret = power_supply_register(&client->dev, &info->battery); + if (ret) { + dev_err(&client->dev, "failed to register battery\n"); + goto fail_register; + } + + return 0; + +fail_register: + kfree(info->battery.name); +fail_name: + i2c_set_clientdata(client, info); + kfree(info); +fail_info: + mutex_lock(&battery_lock); + idr_remove(&battery_id, num); + mutex_unlock(&battery_lock); +fail_id: + return ret; +} + +static const struct i2c_device_id ds2782_id[] = { + {"ds2782", 0}, + {}, +}; + +static struct i2c_driver ds2782_battery_driver = { + .driver = { + .name = "ds2782-battery", + }, + .probe = ds2782_battery_probe, + .remove = ds2782_battery_remove, + .id_table = ds2782_id, +}; + +static int __init ds2782_init(void) +{ + return i2c_add_driver(&ds2782_battery_driver); +} +module_init(ds2782_init); + +static void __exit ds2782_exit(void) +{ + i2c_del_driver(&ds2782_battery_driver); +} +module_exit(ds2782_exit); + +MODULE_AUTHOR("Ryan Mallon "); +MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 8f6c2e4b325a8e9f8f47febb2fd0ed4fae7d45a9 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 1 Jul 2009 11:13:45 +1000 Subject: md: Use new topology calls to indicate alignment and I/O sizes Switch MD over to the new disk_stack_limits() function which checks for aligment and adjusts preferred I/O sizes when stacking. Also indicate preferred I/O sizes where applicable. Signed-off-by: Martin K. Petersen Signed-off-by: Mike Snitzer Signed-off-by: NeilBrown --- drivers/md/linear.c | 4 ++-- drivers/md/multipath.c | 7 ++++--- drivers/md/raid0.c | 9 +++++++-- drivers/md/raid1.c | 9 ++++----- drivers/md/raid10.c | 19 +++++++++++++------ drivers/md/raid5.c | 10 +++++++++- 6 files changed, 39 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 15c8b7b25a9..5810fa906af 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -166,8 +166,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) rdev->sectors = sectors * mddev->chunk_sectors; } - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index cbe368fa659..237fe3fd235 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -294,7 +294,8 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for (path = first; path <= last; path++) if ((p=conf->multipaths+path)->rdev == NULL) { q = rdev->bdev->bd_disk->queue; - blk_queue_stack_limits(mddev->queue, q); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as @@ -463,9 +464,9 @@ static int multipath_run (mddev_t *mddev) disk = conf->multipaths + disk_idx; disk->rdev = rdev; + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); /* as we don't honour merge_bvec_fn, we must never risk * violating it, not that we ever expect a device with * a merge_bvec_fn to be involved in multipath */ diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index ab4a489d869..335f490dcad 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -170,8 +170,8 @@ static int create_strip_zones(mddev_t *mddev) } dev[j] = rdev1; - blk_queue_stack_limits(mddev->queue, - rdev1->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev1->bdev, + rdev1->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -250,6 +250,11 @@ static int create_strip_zones(mddev_t *mddev) mddev->chunk_sectors << 9); goto abort; } + + blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9); + blk_queue_io_opt(mddev->queue, + (mddev->chunk_sectors << 9) * mddev->raid_disks); + printk(KERN_INFO "raid0: done.\n"); mddev->private = conf; return 0; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 89939a7aef5..0569efba0c0 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1123,8 +1123,8 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for (mirror = first; mirror <= last; mirror++) if ( !(p=conf->mirrors+mirror)->rdev) { - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -1988,9 +1988,8 @@ static int run(mddev_t *mddev) disk = conf->mirrors + disk_idx; disk->rdev = rdev; - - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ae12ceafe10..7298a5e5a18 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1151,8 +1151,8 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for ( ; mirror <= last ; mirror++) if ( !(p=conf->mirrors+mirror)->rdev) { - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -2044,7 +2044,7 @@ raid10_size(mddev_t *mddev, sector_t sectors, int raid_disks) static int run(mddev_t *mddev) { conf_t *conf; - int i, disk_idx; + int i, disk_idx, chunk_size; mirror_info_t *disk; mdk_rdev_t *rdev; int nc, fc, fo; @@ -2130,6 +2130,14 @@ static int run(mddev_t *mddev) spin_lock_init(&conf->device_lock); mddev->queue->queue_lock = &conf->device_lock; + chunk_size = mddev->chunk_sectors << 9; + blk_queue_io_min(mddev->queue, chunk_size); + if (conf->raid_disks % conf->near_copies) + blk_queue_io_opt(mddev->queue, chunk_size * conf->raid_disks); + else + blk_queue_io_opt(mddev->queue, chunk_size * + (conf->raid_disks / conf->near_copies)); + list_for_each_entry(rdev, &mddev->disks, same_set) { disk_idx = rdev->raid_disk; if (disk_idx >= mddev->raid_disks @@ -2138,9 +2146,8 @@ static int run(mddev_t *mddev) disk = conf->mirrors + disk_idx; disk->rdev = rdev; - - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f9f991e6e13..92ef9b6abfc 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4452,7 +4452,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) static int run(mddev_t *mddev) { raid5_conf_t *conf; - int working_disks = 0; + int working_disks = 0, chunk_size; mdk_rdev_t *rdev; if (mddev->recovery_cp != MaxSector) @@ -4607,6 +4607,14 @@ static int run(mddev_t *mddev) md_set_array_sectors(mddev, raid5_size(mddev, 0, 0)); blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec); + chunk_size = mddev->chunk_sectors << 9; + blk_queue_io_min(mddev->queue, chunk_size); + blk_queue_io_opt(mddev->queue, chunk_size * + (conf->raid_disks - conf->max_degraded)); + + list_for_each_entry(rdev, &mddev->disks, same_set) + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); return 0; abort: -- cgit v1.2.3 From b8d966efd9a46a9a35beac50cbff6e30565125ef Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 1 Jul 2009 11:14:04 +1000 Subject: md: avoid dereferencing NULL pointer when accessing suspend_* sysfs attributes. If we try to modify one of the md/ sysfs files suspend_lo or suspend_hi when the array is not active, we dereference a NULL. Protect against that. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 09be637d52c..2166af8a765 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3573,7 +3573,8 @@ suspend_lo_store(mddev_t *mddev, const char *buf, size_t len) char *e; unsigned long long new = simple_strtoull(buf, &e, 10); - if (mddev->pers->quiesce == NULL) + if (mddev->pers == NULL || + mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; @@ -3601,7 +3602,8 @@ suspend_hi_store(mddev_t *mddev, const char *buf, size_t len) char *e; unsigned long long new = simple_strtoull(buf, &e, 10); - if (mddev->pers->quiesce == NULL) + if (mddev->pers == NULL || + mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; -- cgit v1.2.3 From 133890103b9de08904f909995973e4b5c08a780e Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Tue, 30 Jun 2009 11:41:11 -0700 Subject: eventfd: revised interface and cleanups Change the eventfd interface to de-couple the eventfd memory context, from the file pointer instance. Without such change, there is no clean way to racely free handle the POLLHUP event sent when the last instance of the file* goes away. Also, now the internal eventfd APIs are using the eventfd context instead of the file*. This patch is required by KVM's IRQfd code, which is still under development. Signed-off-by: Davide Libenzi Cc: Gregory Haskins Cc: Rusty Russell Cc: Benjamin LaHaise Cc: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/lguest/lg.h | 2 +- drivers/lguest/lguest_user.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index d4e8979735c..9c3138265f8 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -82,7 +82,7 @@ struct lg_cpu { struct lg_eventfd { unsigned long addr; - struct file *event; + struct eventfd_ctx *event; }; struct lg_eventfd_map { diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 32e29712105..9f9a2953b38 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -50,7 +50,7 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) /* Now append new entry. */ new->map[new->num].addr = addr; - new->map[new->num].event = eventfd_fget(fd); + new->map[new->num].event = eventfd_ctx_fdget(fd); if (IS_ERR(new->map[new->num].event)) { kfree(new); return PTR_ERR(new->map[new->num].event); @@ -357,7 +357,7 @@ static int close(struct inode *inode, struct file *file) /* Release any eventfds they registered. */ for (i = 0; i < lg->eventfds->num; i++) - fput(lg->eventfds->map[i].event); + eventfd_ctx_put(lg->eventfds->map[i].event); kfree(lg->eventfds); /* If lg->dead doesn't contain an error code it will be NULL or a -- cgit v1.2.3 From c4285b47b0514e2103584ee829246f813e7ae323 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 30 Jun 2009 11:41:21 -0700 Subject: parport/serial: add support for NetMos 9901 Multi-IO card Add support for the PCI-Express NetMos 9901 Multi-IO card. 0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: parport_pc Kernel modules: parport_pc [ 16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65 [ 16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP] [ 16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007) [ 16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2 [ 16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007) [ 16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2 Signed-off-by: Michael Buesch Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 5 ++++- drivers/serial/8250_pci.c | 6 ++++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 1032d5fdbd4..2597145a066 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2907,6 +2907,7 @@ enum parport_pc_pci_cards { netmos_9755, netmos_9805, netmos_9815, + netmos_9901, quatech_sppxp100, }; @@ -2987,7 +2988,7 @@ static struct parport_pc_pci { /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, - + /* netmos_9901 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, }; @@ -3089,6 +3090,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x2000, 0, 0, netmos_9901 }, /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index a07015d646d..6160e03f410 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -759,6 +759,8 @@ static int pci_netmos_init(struct pci_dev *dev) /* subdevice 0x00PS means

parallel, serial */ unsigned int num_serial = dev->subsystem_device & 0xf; + if (dev->device == PCI_DEVICE_ID_NETMOS_9901) + return 0; if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && dev->subsystem_device == 0x0299) return 0; @@ -3557,6 +3559,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL -- cgit v1.2.3 From b1cfebc9231a69d46d66982a2c856ba41ef6d6b9 Mon Sep 17 00:00:00 2001 From: Yang Shi Date: Tue, 30 Jun 2009 11:41:22 -0700 Subject: edac: add DDR3 memory type for MPC85xx EDAC Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory type for MPC85xx EDAC. Signed-off-by: Yang Shi Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/edac_core.h | 4 ++++ drivers/edac/edac_mc_sysfs.c | 4 +++- drivers/edac/mpc85xx_edac.c | 6 ++++++ drivers/edac/mpc85xx_edac.h | 1 + 4 files changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 3493c6bdb82..871c13b4c14 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -150,6 +150,8 @@ enum mem_type { MEM_FB_DDR2, /* fully buffered DDR2 */ MEM_RDDR2, /* Registered DDR2 RAM */ MEM_XDR, /* Rambus XDR */ + MEM_DDR3, /* DDR3 RAM */ + MEM_RDDR3, /* Registered DDR3 RAM */ }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) @@ -167,6 +169,8 @@ enum mem_type { #define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2) #define MEM_FLAG_RDDR2 BIT(MEM_RDDR2) #define MEM_FLAG_XDR BIT(MEM_XDR) +#define MEM_FLAG_DDR3 BIT(MEM_DDR3) +#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3) /* chipset Error Detection and Correction capabilities and mode */ enum edac_type { diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index ad218fe4942..e1d4ce08348 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -94,7 +94,9 @@ static const char *mem_types[] = { [MEM_DDR2] = "Unbuffered-DDR2", [MEM_FB_DDR2] = "FullyBuffered-DDR2", [MEM_RDDR2] = "Registered-DDR2", - [MEM_XDR] = "XDR" + [MEM_XDR] = "XDR", + [MEM_DDR3] = "Unbuffered-DDR3", + [MEM_RDDR3] = "Registered-DDR3" }; static const char *dev_types[] = { diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 7c8c2d72916..3f2ccfc6407 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -757,6 +757,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) case DSC_SDTYPE_DDR2: mtype = MEM_RDDR2; break; + case DSC_SDTYPE_DDR3: + mtype = MEM_RDDR3; + break; default: mtype = MEM_UNKNOWN; break; @@ -769,6 +772,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) case DSC_SDTYPE_DDR2: mtype = MEM_DDR2; break; + case DSC_SDTYPE_DDR3: + mtype = MEM_DDR3; + break; default: mtype = MEM_UNKNOWN; break; diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h index 135b3539a03..52432ee7c4b 100644 --- a/drivers/edac/mpc85xx_edac.h +++ b/drivers/edac/mpc85xx_edac.h @@ -53,6 +53,7 @@ #define DSC_SDTYPE_DDR 0x02000000 #define DSC_SDTYPE_DDR2 0x03000000 +#define DSC_SDTYPE_DDR3 0x07000000 #define DSC_X32_EN 0x00000020 /* Err_Int_En */ -- cgit v1.2.3 From b55f627feeb9d48fdbde3835e18afbc76712e49b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 30 Jun 2009 11:41:26 -0700 Subject: spi: new spi->mode bits Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by: David Brownell Cc: "Paulraj, Sandeep" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spidev.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 5d869c4d3eb..606e7a40a8d 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -58,15 +58,20 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; /* Bit masks for spi_device.mode management. Note that incorrect - * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other - * devices on a shared bus: CS_HIGH, because this device will be - * active when it shouldn't be; 3WIRE, because when active it won't - * behave as it should. + * settings for some settings can cause *lots* of trouble for other + * devices on a shared bus: * - * REVISIT should changing those two modes be privileged? + * - CS_HIGH ... this device will be active when it shouldn't be + * - 3WIRE ... when active, it won't behave as it should + * - NO_CS ... there will be no explicit message boundaries; this + * is completely incompatible with the shared bus model + * - READY ... transfers may proceed when they shouldn't. + * + * REVISIT should changing those flags be privileged? */ #define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \ - | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP) + | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \ + | SPI_NO_CS | SPI_READY) struct spidev_data { dev_t devt; -- cgit v1.2.3 From 70d6027ff2bc8bab180273b77e7ab3e8a62cca51 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 30 Jun 2009 11:41:27 -0700 Subject: spi: add spi_master flag word Add a new spi_master.flags word listing constraints relevant to that controller. Define the first constraint bit: a half duplex restriction. Include that constraint in the OMAP1 MicroWire controller driver. Have the mmc_spi host be the first customer of this flag. Its coding relies heavily on full duplex transfers, so it must fail when the underlying controller driver won't perform them. (The spi_write_then_read routine could use it too: use the temporarily-withdrawn full-duplex speedup unless this flag is set, in which case the existing code applies. Similarly, any spi_master implementing only SPI_3WIRE should set the flag.) Signed-off-by: David Brownell Cc: Marek Szyprowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/mmc_spi.c | 6 ++++++ drivers/spi/omap_uwire.c | 2 ++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 240608cc7ae..a461017ce5c 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1313,6 +1313,12 @@ static int mmc_spi_probe(struct spi_device *spi) struct mmc_spi_host *host; int status; + /* We rely on full duplex transfers, mostly to reduce + * per-transfer overheads (by making fewer transfers). + */ + if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) + return -EINVAL; + /* MMC and SD specs only seem to care that sampling is on the * rising edge ... meaning SPI modes 0 or 3. So either SPI mode * should be legit. We'll use mode 0 since the steady state is 0, diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index aa90ddb3706..8980a5640bd 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -514,6 +514,8 @@ static int __init uwire_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->flags = SPI_MASTER_HALF_DUPLEX; + master->bus_num = 2; /* "official" */ master->num_chipselect = 4; master->setup = uwire_setup; -- cgit v1.2.3 From 537a1bf059fa312355696fa6db80726e655e7f17 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 30 Jun 2009 11:41:29 -0700 Subject: fbdev: add mutex for fb_mmap locking Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by: Krzysztof Helt Cc: Peter Zijlstra Cc: "Rafael J. Wysocki" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atafb.c | 7 ++++++- drivers/video/atmel_lcdfb.c | 2 ++ drivers/video/fbmem.c | 13 +++++-------- drivers/video/fsl-diu-fb.c | 14 +++++++++----- drivers/video/i810/i810_main.c | 2 ++ drivers/video/matrox/matroxfb_base.c | 3 +++ drivers/video/matrox/matroxfb_crtc2.c | 5 ++++- drivers/video/mx3fb.c | 17 +++++++++++------ drivers/video/omap/omapfb_main.c | 4 ++++ drivers/video/platinumfb.c | 2 ++ drivers/video/pxafb.c | 2 ++ drivers/video/sh7760fb.c | 19 ++++++------------- drivers/video/sis/sis_main.c | 2 ++ drivers/video/sm501fb.c | 21 +++++++++++++-------- drivers/video/w100fb.c | 2 ++ 15 files changed, 73 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 018850c116c..497ff8af03e 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2414,7 +2414,10 @@ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) if (err) return err; memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - return fbhw->encode_fix(fix, &par); + mutex_lock(&info->mm_lock); + err = fbhw->encode_fix(fix, &par); + mutex_unlock(&info->mm_lock); + return err; } static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info) @@ -2743,7 +2746,9 @@ static int atafb_set_par(struct fb_info *info) /* Decode wanted screen parameters */ fbhw->decode_var(&info->var, par); + mutex_lock(&info->mm_lock); fbhw->encode_fix(&info->fix, par); + mutex_unlock(&info->mm_lock); /* Set new videomode */ ata_set_par(par); diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 5afd64482f5..cb88394ba99 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -270,7 +270,9 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) smem_len = (var->xres_virtual * var->yres_virtual * ((var->bits_per_pixel + 7) / 8)); + mutex_lock(&info->mm_lock); info->fix.smem_len = max(smem_len, sinfo->smem_len); + mutex_unlock(&info->mm_lock); info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len, (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index f8a09bf8d0c..53ea05645ff 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1310,8 +1310,6 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd, static int fb_mmap(struct file *file, struct vm_area_struct * vma) -__acquires(&info->lock) -__releases(&info->lock) { int fbidx = iminor(file->f_path.dentry->d_inode); struct fb_info *info = registered_fb[fbidx]; @@ -1325,16 +1323,14 @@ __releases(&info->lock) off = vma->vm_pgoff << PAGE_SHIFT; if (!fb) return -ENODEV; + mutex_lock(&info->mm_lock); if (fb->fb_mmap) { int res; - mutex_lock(&info->lock); res = fb->fb_mmap(info, vma); - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); return res; } - mutex_lock(&info->lock); - /* frame buffer memory */ start = info->fix.smem_start; len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len); @@ -1342,13 +1338,13 @@ __releases(&info->lock) /* memory mapped io */ off -= len; if (info->var.accel_flags) { - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); return -EINVAL; } start = info->fix.mmio_start; len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len); } - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); start &= PAGE_MASK; if ((vma->vm_end - vma->vm_start + off) > len) return -EINVAL; @@ -1518,6 +1514,7 @@ register_framebuffer(struct fb_info *fb_info) break; fb_info->node = i; mutex_init(&fb_info->lock); + mutex_init(&fb_info->mm_lock); fb_info->dev = device_create(fb_class, fb_info->device, MKDEV(FB_MAJOR, i), NULL, "fb%d", i); diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index f153c581cbd..0bf2190928d 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -750,24 +750,26 @@ static void update_lcdc(struct fb_info *info) static int map_video_memory(struct fb_info *info) { phys_addr_t phys; + u32 smem_len = info->fix.line_length * info->var.yres_virtual; pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual); pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual); pr_debug("info->fix.line_length = %d\n", info->fix.line_length); + pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len); - info->fix.smem_len = info->fix.line_length * info->var.yres_virtual; - pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len); - info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys); + info->screen_base = fsl_diu_alloc(smem_len, &phys); if (info->screen_base == NULL) { printk(KERN_ERR "Unable to allocate fb memory\n"); return -ENOMEM; } + mutex_lock(&info->mm_lock); info->fix.smem_start = (unsigned long) phys; + info->fix.smem_len = smem_len; + mutex_unlock(&info->mm_lock); info->screen_size = info->fix.smem_len; pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n", - info->fix.smem_start, - info->fix.smem_len); + info->fix.smem_start, info->fix.smem_len); pr_debug("screen base %p\n", info->screen_base); return 0; @@ -776,9 +778,11 @@ static int map_video_memory(struct fb_info *info) static void unmap_video_memory(struct fb_info *info) { fsl_diu_free(info->screen_base, info->fix.smem_len); + mutex_lock(&info->mm_lock); info->screen_base = NULL; info->fix.smem_start = 0; info->fix.smem_len = 0; + mutex_unlock(&info->mm_lock); } /* diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 2e940199fc8..71960672d72 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -1090,8 +1090,10 @@ static int encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) memset(fix, 0, sizeof(struct fb_fix_screeninfo)); strcpy(fix->id, "I810"); + mutex_lock(&info->mm_lock); fix->smem_start = par->fb.physical; fix->smem_len = par->fb.size; + mutex_unlock(&info->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; fix->type_aux = 0; fix->xpanstep = 8; diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 8e7a275df50..59c3a2e1491 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -724,8 +724,10 @@ static void matroxfb_update_fix(WPMINFO2) struct fb_fix_screeninfo *fix = &ACCESS_FBINFO(fbcon).fix; DBG(__func__) + mutex_lock(&ACCESS_FBINFO(fbcon).mm_lock); fix->smem_start = ACCESS_FBINFO(video.base) + ACCESS_FBINFO(curr.ydstorg.bytes); fix->smem_len = ACCESS_FBINFO(video.len_usable) - ACCESS_FBINFO(curr.ydstorg.bytes); + mutex_unlock(&ACCESS_FBINFO(fbcon).mm_lock); } static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) @@ -2081,6 +2083,7 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm spin_lock_init(&ACCESS_FBINFO(lock.accel)); init_rwsem(&ACCESS_FBINFO(crtc2.lock)); init_rwsem(&ACCESS_FBINFO(altout.lock)); + mutex_init(&ACCESS_FBINFO(fbcon).mm_lock); ACCESS_FBINFO(irq_flags) = 0; init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait)); init_waitqueue_head(&ACCESS_FBINFO(crtc2.vsync.wait)); diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c index 7ac4c5f6145..909e10a1189 100644 --- a/drivers/video/matrox/matroxfb_crtc2.c +++ b/drivers/video/matrox/matroxfb_crtc2.c @@ -289,13 +289,16 @@ static int matroxfb_dh_release(struct fb_info* info, int user) { #undef m2info } -static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) { +static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) +{ struct fb_fix_screeninfo *fix = &m2info->fbcon.fix; strcpy(fix->id, "MATROX DH"); + mutex_lock(&m2info->fbcon.mm_lock); fix->smem_start = m2info->video.base; fix->smem_len = m2info->video.len_usable; + mutex_unlock(&m2info->fbcon.mm_lock); fix->ypanstep = 1; fix->ywrapstep = 0; fix->xpanstep = 8; /* TBD */ diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index b7af5256e88..567fb944bd2 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -669,7 +669,7 @@ static uint32_t bpp_to_pixfmt(int bpp) } static int mx3fb_blank(int blank, struct fb_info *fbi); -static int mx3fb_map_video_memory(struct fb_info *fbi); +static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len); static int mx3fb_unmap_video_memory(struct fb_info *fbi); /** @@ -742,8 +742,7 @@ static int mx3fb_set_par(struct fb_info *fbi) if (fbi->fix.smem_start) mx3fb_unmap_video_memory(fbi); - fbi->fix.smem_len = mem_len; - if (mx3fb_map_video_memory(fbi) < 0) { + if (mx3fb_map_video_memory(fbi, mem_len) < 0) { mutex_unlock(&mx3_fbi->mutex); return -ENOMEM; } @@ -1198,6 +1197,7 @@ static int mx3fb_resume(struct platform_device *pdev) /** * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. * @fbi: framebuffer information pointer + * @mem_len: length of mapped memory * @return: Error code indicating success or failure * * This buffer is remapped into a non-cached, non-buffered, memory region to @@ -1205,23 +1205,26 @@ static int mx3fb_resume(struct platform_device *pdev) * area is remapped, all virtual memory access to the video memory should occur * at the new region. */ -static int mx3fb_map_video_memory(struct fb_info *fbi) +static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len) { int retval = 0; dma_addr_t addr; fbi->screen_base = dma_alloc_writecombine(fbi->device, - fbi->fix.smem_len, + mem_len, &addr, GFP_DMA); if (!fbi->screen_base) { dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", - fbi->fix.smem_len); + mem_len); retval = -EBUSY; goto err0; } + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = addr; + fbi->fix.smem_len = mem_len; + mutex_unlock(&fbi->mm_lock); dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); @@ -1251,8 +1254,10 @@ static int mx3fb_unmap_video_memory(struct fb_info *fbi) fbi->screen_base, fbi->fix.smem_start); fbi->screen_base = 0; + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = 0; fbi->fix.smem_len = 0; + mutex_unlock(&fbi->mm_lock); return 0; } diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 060d72fe57c..4ea99bfc37b 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -393,8 +393,10 @@ static void set_fb_fix(struct fb_info *fbi) rg = &plane->fbdev->mem_desc.region[plane->idx]; fbi->screen_base = rg->vaddr; + mutex_lock(&fbi->mm_lock); fix->smem_start = rg->paddr; fix->smem_len = rg->size; + mutex_unlock(&fbi->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; bpp = var->bits_per_pixel; @@ -886,8 +888,10 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) * plane memory is dealloce'd, the other * screen parameters in var / fix are invalid. */ + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = 0; fbi->fix.smem_len = 0; + mutex_unlock(&fbi->mm_lock); } } } diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c index 03b3670130a..bacfabd9ce1 100644 --- a/drivers/video/platinumfb.c +++ b/drivers/video/platinumfb.c @@ -141,7 +141,9 @@ static int platinumfb_set_par (struct fb_info *info) offset = 0x10; info->screen_base = pinfo->frame_buffer + init->fb_offset + offset; + mutex_lock(&info->mm_lock); info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset; + mutex_unlock(&info->mm_lock); info->fix.visual = (pinfo->cmode == CMODE_8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<cmode) diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 0889d50c328..6506117c134 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -815,8 +815,10 @@ static int overlayfb_map_video_memory(struct pxafb_layer *ofb) ofb->video_mem_phys = virt_to_phys(ofb->video_mem); ofb->video_mem_size = size; + mutex_lock(&ofb->fb.mm_lock); ofb->fb.fix.smem_start = ofb->video_mem_phys; ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual; + mutex_unlock(&ofb->fb.mm_lock); ofb->fb.screen_base = ofb->video_mem; return 0; } diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c index 653bdfee305..9f6d6e61f0c 100644 --- a/drivers/video/sh7760fb.c +++ b/drivers/video/sh7760fb.c @@ -120,18 +120,6 @@ static int sh7760_setcolreg (u_int regno, return 0; } -static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info, - unsigned long stride) -{ - memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - strcpy(fix->id, "sh7760-lcdc"); - - fix->smem_start = (unsigned long)info->screen_base; - fix->smem_len = info->screen_size; - - fix->line_length = stride; -} - static int sh7760fb_get_color_info(struct device *dev, u16 lddfr, int *bpp, int *gray) { @@ -334,7 +322,8 @@ static int sh7760fb_set_par(struct fb_info *info) iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */ - encode_fix(&info->fix, info, stride); + info->fix.line_length = stride; + sh7760fb_check_var(&info->var, info); sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */ @@ -435,6 +424,8 @@ static int sh7760fb_alloc_mem(struct fb_info *info) info->screen_base = fbmem; info->screen_size = vram; + info->fix.smem_start = (unsigned long)info->screen_base; + info->fix.smem_len = info->screen_size; return 0; } @@ -520,6 +511,8 @@ static int __devinit sh7760fb_probe(struct platform_device *pdev) info->var.transp.length = 0; info->var.transp.msb_right = 0; + strcpy(info->fix.id, "sh7760-lcdc"); + /* set the DON2 bit now, before cmap allocation, as it will randomize * palette memory. */ diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 7072d19080d..fd33455389b 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -1847,8 +1847,10 @@ sisfb_get_fix(struct fb_fix_screeninfo *fix, int con, struct fb_info *info) strcpy(fix->id, ivideo->myid); + mutex_lock(&info->mm_lock); fix->smem_start = ivideo->video_base + ivideo->video_offset; fix->smem_len = ivideo->sisfb_mem; + mutex_unlock(&info->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; fix->type_aux = 0; fix->visual = (ivideo->video_bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index eb5d73a0670..98f24f0ec00 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -145,7 +145,7 @@ static inline void sm501fb_sync_regs(struct sm501fb_info *info) #define SM501_MEMF_ACCEL (8) static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, - unsigned int why, size_t size) + unsigned int why, size_t size, u32 smem_len) { struct sm501fb_par *par; struct fb_info *fbi; @@ -172,7 +172,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, if (ptr > 0) ptr &= ~(PAGE_SIZE - 1); - if (fbi && ptr < fbi->fix.smem_len) + if (fbi && ptr < smem_len) return -ENOMEM; break; @@ -197,7 +197,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, case SM501_MEMF_ACCEL: fbi = inf->fb[HEAD_CRT]; - ptr = fbi ? fbi->fix.smem_len : 0; + ptr = fbi ? smem_len : 0; fbi = inf->fb[HEAD_PANEL]; if (fbi) { @@ -413,6 +413,7 @@ static int sm501fb_set_par_common(struct fb_info *info, unsigned int mem_type; unsigned int clock_type; unsigned int head_addr; + unsigned int smem_len; dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n", __func__, var->xres, var->yres, var->bits_per_pixel, @@ -453,18 +454,20 @@ static int sm501fb_set_par_common(struct fb_info *info, /* allocate fb memory within 501 */ info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8; - info->fix.smem_len = info->fix.line_length * var->yres_virtual; + smem_len = info->fix.line_length * var->yres_virtual; dev_dbg(fbi->dev, "%s: line length = %u\n", __func__, info->fix.line_length); - if (sm501_alloc_mem(fbi, &par->screen, mem_type, - info->fix.smem_len)) { + if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) { dev_err(fbi->dev, "no memory available\n"); return -ENOMEM; } + mutex_lock(&info->mm_lock); info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr; + info->fix.smem_len = smem_len; + mutex_unlock(&info->mm_lock); info->screen_base = fbi->fbmem + par->screen.sm_addr; info->screen_size = info->fix.smem_len; @@ -637,7 +640,8 @@ static int sm501fb_set_par_crt(struct fb_info *info) if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) { /* the head is displaying panel data... */ - sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0); + sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0, + info->fix.smem_len); goto out_update; } @@ -1289,7 +1293,8 @@ static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base) par->cursor_regs = info->regs + reg_base; - ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024); + ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024, + fbi->fix.smem_len); if (ret < 0) return ret; diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index d0674f1e3f1..8a141c2c637 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -523,6 +523,7 @@ static int w100fb_set_par(struct fb_info *info) info->fix.ywrapstep = 0; info->fix.line_length = par->xres * BITS_PER_PIXEL / 8; + mutex_lock(&info->mm_lock); if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) { par->extmem_active = 1; info->fix.smem_len = par->mach->mem->size+1; @@ -530,6 +531,7 @@ static int w100fb_set_par(struct fb_info *info) par->extmem_active = 0; info->fix.smem_len = MEM_INT_SIZE+1; } + mutex_unlock(&info->mm_lock); w100fb_activate_var(par); } -- cgit v1.2.3 From 529ba0d9669386157457a1cb96294d2fe79b3f88 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 30 Jun 2009 11:41:30 -0700 Subject: spi: bitbang bugfix in message setup Bugfix to spi_bitbang infrastructure: make sure to always set transfer parameters on the first pass through the message's per-transfer loop. This can matter with drivers that replace the per-word or per-buffer transfer primitives, on busses with multiple SPI devices. Previously, this could have started messages using the settings left after previous messages. The problem was observed when a high speed chip (m25p80 type flash) was running very slowly because a low speed device (avr8 microcontroller) had previously used the bus. Similar faults could have driven the low speed device too fast, or used an unexpected word size. Acked-by: Steven A. Falco Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bitbang.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 2a5abc08e85..f1db395dd88 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -258,6 +258,11 @@ static void bitbang_work(struct work_struct *work) struct spi_bitbang *bitbang = container_of(work, struct spi_bitbang, work); unsigned long flags; + int do_setup = -1; + int (*setup_transfer)(struct spi_device *, + struct spi_transfer *); + + setup_transfer = bitbang->setup_transfer; spin_lock_irqsave(&bitbang->lock, flags); bitbang->busy = 1; @@ -269,8 +274,6 @@ static void bitbang_work(struct work_struct *work) unsigned tmp; unsigned cs_change; int status; - int (*setup_transfer)(struct spi_device *, - struct spi_transfer *); m = container_of(bitbang->queue.next, struct spi_message, queue); @@ -287,19 +290,19 @@ static void bitbang_work(struct work_struct *work) tmp = 0; cs_change = 1; status = 0; - setup_transfer = NULL; list_for_each_entry (t, &m->transfers, transfer_list) { - /* override or restore speed and wordsize */ - if (t->speed_hz || t->bits_per_word) { - setup_transfer = bitbang->setup_transfer; + /* override speed or wordsize? */ + if (t->speed_hz || t->bits_per_word) + do_setup = 1; + + /* init (-1) or override (1) transfer params */ + if (do_setup != 0) { if (!setup_transfer) { status = -ENOPROTOOPT; break; } - } - if (setup_transfer) { status = setup_transfer(spi, t); if (status < 0) break; @@ -363,9 +366,10 @@ static void bitbang_work(struct work_struct *work) m->status = status; m->complete(m->context); - /* restore speed and wordsize */ - if (setup_transfer) + /* restore speed and wordsize if it was overridden */ + if (do_setup == 1) setup_transfer(spi, NULL); + do_setup = 0; /* normally deactivate chipselect ... unless no error and * cs_change has hinted that the next message will probably -- cgit v1.2.3 From 79d7f4ee23d41571d9e4663521b5e6604c55729a Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 30 Jun 2009 11:41:38 -0700 Subject: gpio: pl061: fix probe error handling code Note that IRQ has not been initialized when kmalloc() fails. Also, use DECLARE_BITMAP() to make the code clearer. Signed-off-by: Baruch Siach Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/pl061.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index aa8e7cb020d..80e48398669 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -221,7 +221,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) struct pl061_gpio *chip; struct list_head *chip_list; int ret, irq, i; - static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)]; + static DECLARE_BITMAP(init_irq, NR_IRQS); pdata = dev->dev.platform_data; if (pdata == NULL) @@ -280,6 +280,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */ chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL); if (chip_list == NULL) { + clear_bit(irq, init_irq); ret = -ENOMEM; goto iounmap; } -- cgit v1.2.3 From 50efacf6711e6c75595afd9b92aa15c1e4f7c79d Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 30 Jun 2009 11:41:39 -0700 Subject: gpio: pl061: fix IRQ handling for GPIOs >= PL061_GPIO_NR IRQ handling is wrong for any GPIO >= PL061_GPIO_NR. Fix this by implementing and using a proper .to_irq method. Signed-off-by: Baruch Siach Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/pl061.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index 80e48398669..4ee4c8367a3 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -109,6 +109,16 @@ static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value) writeb(!!value << offset, chip->base + (1 << (offset + 2))); } +static int pl061_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); + + if (chip->irq_base == (unsigned) -1) + return -EINVAL; + + return chip->irq_base + offset; +} + /* * PL061 GPIO IRQ */ @@ -200,7 +210,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) desc->chip->ack(irq); list_for_each(ptr, chip_list) { unsigned long pending; - int gpio; + int offset; chip = list_entry(ptr, struct pl061_gpio, list); pending = readb(chip->base + GPIOMIS); @@ -209,8 +219,8 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) if (pending == 0) continue; - for_each_bit(gpio, &pending, PL061_GPIO_NR) - generic_handle_irq(gpio_to_irq(gpio)); + for_each_bit(offset, &pending, PL061_GPIO_NR) + generic_handle_irq(pl061_to_irq(&chip->gc, offset)); } desc->chip->unmask(irq); } @@ -251,6 +261,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) chip->gc.direction_output = pl061_direction_output; chip->gc.get = pl061_get_value; chip->gc.set = pl061_set_value; + chip->gc.to_irq = pl061_to_irq; chip->gc.base = pdata->gpio_base; chip->gc.ngpio = PL061_GPIO_NR; chip->gc.label = dev_name(&dev->dev); -- cgit v1.2.3 From eafad22a05fdaca60f06433ffe8810aaa920d539 Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Tue, 30 Jun 2009 11:41:40 -0700 Subject: atyfb: fix HP OmniBook 500 reboot hang Apparently HP OmniBook 500's BIOS doesn't like the way atyfb reprograms the hardware. The BIOS will simply hang after a reboot. Fix the problem by restoring the hardware to it's original state on reboot. Signed-off-by: Ville Syrjala Cc: Mikulas Patocka Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/aty/atyfb.h | 2 + drivers/video/aty/atyfb_base.c | 89 +++++++++++++++++++++++++++++++++++++----- 2 files changed, 82 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h index 7691e73823d..0369653b5d8 100644 --- a/drivers/video/aty/atyfb.h +++ b/drivers/video/aty/atyfb.h @@ -187,6 +187,8 @@ struct atyfb_par { int mtrr_reg; #endif u32 mem_cntl; + struct crtc saved_crtc; + union aty_pll saved_pll; }; /* diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 1207c208a30..06782906daf 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -66,6 +66,8 @@ #include #include #include +#include +#include #include #include @@ -249,8 +251,6 @@ static int aty_init(struct fb_info *info); static int store_video_par(char *videopar, unsigned char m64_num); #endif -static struct crtc saved_crtc; -static union aty_pll saved_pll; static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc); static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc); @@ -261,6 +261,8 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info); static int read_aty_sense(const struct atyfb_par *par); #endif +static DEFINE_MUTEX(reboot_lock); +static struct fb_info *reboot_info; /* * Interface used by the world @@ -2390,9 +2392,9 @@ static int __devinit aty_init(struct fb_info *info) #endif /* CONFIG_FB_ATY_CT */ /* save previous video mode */ - aty_get_crtc(par, &saved_crtc); + aty_get_crtc(par, &par->saved_crtc); if(par->pll_ops->get_pll) - par->pll_ops->get_pll(info, &saved_pll); + par->pll_ops->get_pll(info, &par->saved_pll); par->mem_cntl = aty_ld_le32(MEM_CNTL, par); gtb_memsize = M64_HAS(GTB_DSP); @@ -2667,8 +2669,8 @@ static int __devinit aty_init(struct fb_info *info) aty_init_exit: /* restore video mode */ - aty_set_crtc(par, &saved_crtc); - par->pll_ops->set_pll(info, &saved_pll); + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(info, &par->saved_pll); #ifdef CONFIG_MTRR if (par->mtrr_reg >= 0) { @@ -3502,6 +3504,11 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi par->mmap_map[1].prot_flag = _PAGE_E; #endif /* __sparc__ */ + mutex_lock(&reboot_lock); + if (!reboot_info) + reboot_info = info; + mutex_unlock(&reboot_lock); + return 0; err_release_io: @@ -3614,8 +3621,8 @@ static void __devexit atyfb_remove(struct fb_info *info) struct atyfb_par *par = (struct atyfb_par *) info->par; /* restore video mode */ - aty_set_crtc(par, &saved_crtc); - par->pll_ops->set_pll(info, &saved_pll); + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(info, &par->saved_pll); unregister_framebuffer(info); @@ -3661,6 +3668,11 @@ static void __devexit atyfb_pci_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); + mutex_lock(&reboot_lock); + if (reboot_info == info) + reboot_info = NULL; + mutex_unlock(&reboot_lock); + atyfb_remove(info); } @@ -3808,6 +3820,56 @@ static int __init atyfb_setup(char *options) } #endif /* MODULE */ +static int atyfb_reboot_notify(struct notifier_block *nb, + unsigned long code, void *unused) +{ + struct atyfb_par *par; + + if (code != SYS_RESTART) + return NOTIFY_DONE; + + mutex_lock(&reboot_lock); + + if (!reboot_info) + goto out; + + if (!lock_fb_info(reboot_info)) + goto out; + + par = reboot_info->par; + + /* + * HP OmniBook 500's BIOS doesn't like the state of the + * hardware after atyfb has been used. Restore the hardware + * to the original state to allow successful reboots. + */ + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(reboot_info, &par->saved_pll); + + unlock_fb_info(reboot_info); + out: + mutex_unlock(&reboot_lock); + + return NOTIFY_DONE; +} + +static struct notifier_block atyfb_reboot_notifier = { + .notifier_call = atyfb_reboot_notify, +}; + +static const struct dmi_system_id atyfb_reboot_ids[] = { + { + .ident = "HP OmniBook 500", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"), + DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"), + }, + }, + + { } +}; + static int __init atyfb_init(void) { int err1 = 1, err2 = 1; @@ -3826,11 +3888,20 @@ static int __init atyfb_init(void) err2 = atyfb_atari_probe(); #endif - return (err1 && err2) ? -ENODEV : 0; + if (err1 && err2) + return -ENODEV; + + if (dmi_check_system(atyfb_reboot_ids)) + register_reboot_notifier(&atyfb_reboot_notifier); + + return 0; } static void __exit atyfb_exit(void) { + if (dmi_check_system(atyfb_reboot_ids)) + unregister_reboot_notifier(&atyfb_reboot_notifier); + #ifdef CONFIG_PCI pci_unregister_driver(&atyfb_driver); #endif -- cgit v1.2.3 From ee905d0c58a440a5bd10c845e8305f6f7f706be2 Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Tue, 30 Jun 2009 11:41:42 -0700 Subject: atyfb: fix alignment for block writes Block writes require 64 byte alignment. Since block writes could be used with SGRAM or WRAM also refine the memory type detection to check for either type before deciding to use the 64 byte alignment. Signed-off-by: Ville Syrjala Tested-by: Mikulas Patocka Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/aty/atyfb.h | 1 + drivers/video/aty/atyfb_base.c | 52 ++++++++++++++++++++++++++++++---------- drivers/video/aty/mach64_accel.c | 7 ++++-- 3 files changed, 46 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h index 0369653b5d8..1f39a62f899 100644 --- a/drivers/video/aty/atyfb.h +++ b/drivers/video/aty/atyfb.h @@ -219,6 +219,7 @@ struct atyfb_par { #define M64F_XL_DLL 0x00080000 #define M64F_MFB_FORCE_4 0x00100000 #define M64F_HW_TRIPLE 0x00200000 +#define M64F_XL_MEM 0x00400000 /* * Register access */ diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 06782906daf..63d3739d43a 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -363,8 +363,8 @@ static unsigned long phys_guiregbase[FB_MAX] __devinitdata = { 0, }; #define ATI_CHIP_264GTPRO (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D) #define ATI_CHIP_264LTPRO (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D) -#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4) -#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS) +#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM) +#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS) static struct { u16 pci_id; @@ -541,6 +541,7 @@ static char ram_edo[] __devinitdata = "EDO"; static char ram_sdram[] __devinitdata = "SDRAM (1:1)"; static char ram_sgram[] __devinitdata = "SGRAM (1:1)"; static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)"; +static char ram_wram[] __devinitdata = "WRAM"; static char ram_off[] __devinitdata = "OFF"; #endif /* CONFIG_FB_ATY_CT */ @@ -554,6 +555,10 @@ static char *aty_gx_ram[8] __devinitdata = { #ifdef CONFIG_FB_ATY_CT static char *aty_ct_ram[8] __devinitdata = { + ram_off, ram_dram, ram_edo, ram_edo, + ram_sdram, ram_sgram, ram_wram, ram_resv +}; +static char *aty_xl_ram[8] __devinitdata = { ram_off, ram_dram, ram_edo, ram_edo, ram_sdram, ram_sgram, ram_sdram32, ram_resv }; @@ -762,6 +767,17 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) #endif /* CONFIG_FB_ATY_GENERIC_LCD */ } +static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp) +{ + u32 line_length = vxres * bpp / 8; + + if (par->ram_type == SGRAM || + (!M64_HAS(XL_MEM) && par->ram_type == WRAM)) + line_length = (line_length + 63) & ~63; + + return line_length; +} + static int aty_var_to_crtc(const struct fb_info *info, const struct fb_var_screeninfo *var, struct crtc *crtc) { @@ -771,13 +787,14 @@ static int aty_var_to_crtc(const struct fb_info *info, u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol; u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync; u32 pix_width, dp_pix_width, dp_chain_mask; + u32 line_length; /* input */ - xres = var->xres; + xres = (var->xres + 7) & ~7; yres = var->yres; - vxres = var->xres_virtual; + vxres = (var->xres_virtual + 7) & ~7; vyres = var->yres_virtual; - xoffset = var->xoffset; + xoffset = (var->xoffset + 7) & ~7; yoffset = var->yoffset; bpp = var->bits_per_pixel; if (bpp == 16) @@ -829,7 +846,9 @@ static int aty_var_to_crtc(const struct fb_info *info, } else FAIL("invalid bpp"); - if (vxres * vyres * bpp / 8 > info->fix.smem_len) + line_length = calc_line_length(par, vxres, bpp); + + if (vyres * line_length > info->fix.smem_len) FAIL("not enough video RAM"); h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; @@ -971,7 +990,9 @@ static int aty_var_to_crtc(const struct fb_info *info, crtc->xoffset = xoffset; crtc->yoffset = yoffset; crtc->bpp = bpp; - crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19); + crtc->off_pitch = + ((yoffset * line_length + xoffset * bpp / 8) / 8) | + ((line_length / bpp) << 22); crtc->vline_crnt_vline = 0; crtc->h_tot_disp = h_total | (h_disp<<16); @@ -1396,7 +1417,9 @@ static int atyfb_set_par(struct fb_info *info) } aty_st_8(DAC_MASK, 0xff, par); - info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8; + info->fix.line_length = calc_line_length(par, var->xres_virtual, + var->bits_per_pixel); + info->fix.visual = var->bits_per_pixel <= 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; @@ -1507,10 +1530,12 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info) { u32 xoffset = info->var.xoffset; u32 yoffset = info->var.yoffset; - u32 vxres = par->crtc.vxres; + u32 line_length = info->fix.line_length; u32 bpp = info->var.bits_per_pixel; - par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19); + par->crtc.off_pitch = + ((yoffset * line_length + xoffset * bpp / 8) / 8) | + ((line_length / bpp) << 22); } @@ -2203,7 +2228,7 @@ static void __devinit aty_calc_mem_refresh(struct atyfb_par *par, int xclk) const int *refresh_tbl; int i, size; - if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) { + if (M64_HAS(XL_MEM)) { refresh_tbl = ragexl_tbl; size = ARRAY_SIZE(ragexl_tbl); } else { @@ -2337,7 +2362,10 @@ static int __devinit aty_init(struct fb_info *info) par->pll_ops = &aty_pll_ct; par->bus_type = PCI; par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07); - ramname = aty_ct_ram[par->ram_type]; + if (M64_HAS(XL_MEM)) + ramname = aty_xl_ram[par->ram_type]; + else + ramname = aty_ct_ram[par->ram_type]; /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM) par->pll_limits.mclk = 63; diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c index 0cc9724e61a..51fcc0a2c94 100644 --- a/drivers/video/aty/mach64_accel.c +++ b/drivers/video/aty/mach64_accel.c @@ -63,14 +63,17 @@ static void reset_GTC_3D_engine(const struct atyfb_par *par) void aty_init_engine(struct atyfb_par *par, struct fb_info *info) { u32 pitch_value; + u32 vxres; /* determine modal information from global mode structure */ - pitch_value = info->var.xres_virtual; + pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8); + vxres = info->var.xres_virtual; if (info->var.bits_per_pixel == 24) { /* In 24 bpp, the engine is in 8 bpp - this requires that all */ /* horizontal coordinates and widths must be adjusted */ pitch_value *= 3; + vxres *= 3; } /* On GTC (RagePro), we need to reset the 3D engine before */ @@ -133,7 +136,7 @@ void aty_init_engine(struct atyfb_par *par, struct fb_info *info) aty_st_le32(SC_LEFT, 0, par); aty_st_le32(SC_TOP, 0, par); aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par); - aty_st_le32(SC_RIGHT, pitch_value - 1, par); + aty_st_le32(SC_RIGHT, vxres - 1, par); /* set background color to minimum value (usually BLACK) */ aty_st_le32(DP_BKGD_CLR, 0, par); -- cgit v1.2.3 From 9980060bad5607ca6db7fb8683de671b522e56a4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 30 Jun 2009 11:41:43 -0700 Subject: bfin: delay IRQ registration until driver is ready Make sure we do not actually request the RTC IRQ until the device driver is fully ready to handle and process any interrupt. This way a spurious interrupt won't crash the system (which may happen if the bootloader was poking the RTC right before booting Linux). Signed-off-by: Mike Frysinger Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-bfin.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c index aafd3e6ebb0..a118eb0f1e6 100644 --- a/drivers/rtc/rtc-bfin.c +++ b/drivers/rtc/rtc-bfin.c @@ -1,8 +1,8 @@ /* * Blackfin On-Chip Real Time Clock Driver - * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789] + * Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x * - * Copyright 2004-2008 Analog Devices Inc. + * Copyright 2004-2009 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -363,7 +363,7 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) struct bfin_rtc *rtc; struct device *dev = &pdev->dev; int ret = 0; - unsigned long timeout; + unsigned long timeout = jiffies + HZ; dev_dbg_stamp(dev); @@ -374,32 +374,32 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); device_init_wakeup(dev, 1); + /* Register our RTC with the RTC framework */ + rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, + THIS_MODULE); + if (unlikely(IS_ERR(rtc->rtc_dev))) { + ret = PTR_ERR(rtc->rtc_dev); + goto err; + } + /* Grab the IRQ and init the hardware */ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev); if (unlikely(ret)) - goto err; + goto err_reg; /* sometimes the bootloader touched things, but the write complete was not * enabled, so let's just do a quick timeout here since the IRQ will not fire ... */ - timeout = jiffies + HZ; while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING) if (time_after(jiffies, timeout)) break; bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE); bfin_write_RTC_SWCNT(0); - /* Register our RTC with the RTC framework */ - rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE); - if (unlikely(IS_ERR(rtc->rtc_dev))) { - ret = PTR_ERR(rtc->rtc_dev); - goto err_irq; - } - return 0; - err_irq: - free_irq(IRQ_RTC, dev); - err: +err_reg: + rtc_device_unregister(rtc->rtc_dev); +err: kfree(rtc); return ret; } -- cgit v1.2.3 From 8516a500029890a72622d245f8ed32c4e30969b7 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 30 Jun 2009 11:41:44 -0700 Subject: floppy: fix lock imbalance A crappy macro prevents us unlocking on a fail path. Expand the macro and unlock appropriatelly. Signed-off-by: Jiri Slaby Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/floppy.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 862b40c9018..91b75301378 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3327,7 +3327,10 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g, if (!capable(CAP_SYS_ADMIN)) return -EPERM; mutex_lock(&open_lock); - LOCK_FDC(drive, 1); + if (lock_fdc(drive, 1)) { + mutex_unlock(&open_lock); + return -EINTR; + } floppy_type[type] = *g; floppy_type[type].name = "user format"; for (cnt = type << 2; cnt < (type << 2) + 4; cnt++) -- cgit v1.2.3 From 1ec22eb2b4a2e1a763106bce36b11c02eaa84e61 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 1 Jul 2009 12:27:21 +1000 Subject: md: fix error path when duplicate name is found on md device creation. When an md device is created by name (rather than number) we need to check that the name is not already in use. If this check finds a duplicate, we return an error without dropping the lock or freeing the newly create mddev. This patch fixes that. Cc: stable@kernel.org Found-by: Jiri Slaby Signed-off-by: NeilBrown --- drivers/md/md.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 2166af8a765..58bee2366ea 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3862,6 +3862,8 @@ static int md_alloc(dev_t dev, char *name) if (mddev2->gendisk && strcmp(mddev2->gendisk->disk_name, name) == 0) { spin_unlock(&all_mddevs_lock); + mutex_unlock(&disks_mutex); + mddev_put(mddev); return -EEXIST; } spin_unlock(&all_mddevs_lock); -- cgit v1.2.3 From 0909dc448c98ed5021c87ffdfc09fb473aa464ab Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 1 Jul 2009 12:27:21 +1000 Subject: md: tidy up error paths in md_alloc As the recent bug in md_alloc showed, having a single exit path for unlocking and putting is a good idea. So restructure md_alloc to have a single mutex_unlock and mddev_put, and use gotos where necessary. Found-by: Jiri Slaby Signed-off-by: NeilBrown --- drivers/md/md.c | 38 ++++++++++++++++++-------------------- 1 file changed, 18 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 58bee2366ea..65fe35b5e34 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3846,11 +3846,9 @@ static int md_alloc(dev_t dev, char *name) flush_scheduled_work(); mutex_lock(&disks_mutex); - if (mddev->gendisk) { - mutex_unlock(&disks_mutex); - mddev_put(mddev); - return -EEXIST; - } + error = -EEXIST; + if (mddev->gendisk) + goto abort; if (name) { /* Need to ensure that 'name' is not a duplicate. @@ -3862,19 +3860,15 @@ static int md_alloc(dev_t dev, char *name) if (mddev2->gendisk && strcmp(mddev2->gendisk->disk_name, name) == 0) { spin_unlock(&all_mddevs_lock); - mutex_unlock(&disks_mutex); - mddev_put(mddev); - return -EEXIST; + goto abort; } spin_unlock(&all_mddevs_lock); } + error = -ENOMEM; mddev->queue = blk_alloc_queue(GFP_KERNEL); - if (!mddev->queue) { - mutex_unlock(&disks_mutex); - mddev_put(mddev); - return -ENOMEM; - } + if (!mddev->queue) + goto abort; mddev->queue->queuedata = mddev; /* Can be unlocked because the queue is new: no concurrency */ @@ -3884,11 +3878,9 @@ static int md_alloc(dev_t dev, char *name) disk = alloc_disk(1 << shift); if (!disk) { - mutex_unlock(&disks_mutex); blk_cleanup_queue(mddev->queue); mddev->queue = NULL; - mddev_put(mddev); - return -ENOMEM; + goto abort; } disk->major = MAJOR(mddev->unit); disk->first_minor = unit << shift; @@ -3910,16 +3902,22 @@ static int md_alloc(dev_t dev, char *name) mddev->gendisk = disk; error = kobject_init_and_add(&mddev->kobj, &md_ktype, &disk_to_dev(disk)->kobj, "%s", "md"); - mutex_unlock(&disks_mutex); - if (error) + if (error) { + /* This isn't possible, but as kobject_init_and_add is marked + * __must_check, we must do something with the result + */ printk(KERN_WARNING "md: cannot register %s/md - name in use\n", disk->disk_name); - else { + error = 0; + } + abort: + mutex_unlock(&disks_mutex); + if (!error) { kobject_uevent(&mddev->kobj, KOBJ_ADD); mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state"); } mddev_put(mddev); - return 0; + return error; } static struct kobject *md_probe(dev_t dev, int *part, void *data) -- cgit v1.2.3 From a5c308d4d1659b1f4833b863394e3e24cdbdfc6e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 1 Jul 2009 13:15:35 +1000 Subject: md/raid5: suspend shouldn't affect read requests. md allows write to regions on an array to be suspended temporarily. This allows user-space to participate is aspects of reshape. In particular, data can be copied with not risk of a race. We should not be blocking read requests though, so don't. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid5.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 92ef9b6abfc..1f444ae07f8 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3702,7 +3702,8 @@ static int make_request(struct request_queue *q, struct bio * bi) /* FIXME what if we get a false positive because these * are being updated. */ - if (logical_sector >= mddev->suspend_lo && + if (bio_data_dir(bi) == WRITE && + logical_sector >= mddev->suspend_lo && logical_sector < mddev->suspend_hi) { release_stripe(sh); schedule(); -- cgit v1.2.3 From e62e58a5ffdc98ac28d8dbd070c857620d541f99 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 1 Jul 2009 13:15:35 +1000 Subject: md: use interruptible wait when duration is controlled by userspace. User space can set various limits on an md array so that resync waits when it gets to a certain point, or so that I/O is blocked for a short while. When md is waiting against one of these limit, it should use an interruptible wait so as not to add to the load average, and so are not to trigger a warning if the wait goes on for too long. Signed-off-by: NeilBrown --- drivers/md/md.c | 14 ++++++++++---- drivers/md/raid5.c | 15 +++++++++++---- 2 files changed, 21 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 65fe35b5e34..0f4a70c43ff 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6336,10 +6336,16 @@ void md_do_sync(mddev_t *mddev) sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } - if (j >= mddev->resync_max) - wait_event(mddev->recovery_wait, - mddev->resync_max > j - || kthread_should_stop()); + while (j >= mddev->resync_max && !kthread_should_stop()) { + /* As this condition is controlled by user-space, + * we can block indefinitely, so use '_interruptible' + * to avoid triggering warnings. + */ + flush_signals(current); /* just in case */ + wait_event_interruptible(mddev->recovery_wait, + mddev->resync_max > j + || kthread_should_stop()); + } if (kthread_should_stop()) goto interrupted; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 1f444ae07f8..37835538b58 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3699,14 +3699,21 @@ static int make_request(struct request_queue *q, struct bio * bi) goto retry; } } - /* FIXME what if we get a false positive because these - * are being updated. - */ + if (bio_data_dir(bi) == WRITE && logical_sector >= mddev->suspend_lo && logical_sector < mddev->suspend_hi) { release_stripe(sh); - schedule(); + /* As the suspend_* range is controlled by + * userspace, we want an interruptible + * wait. + */ + flush_signals(current); + prepare_to_wait(&conf->wait_for_overlap, + &w, TASK_INTERRUPTIBLE); + if (logical_sector >= mddev->suspend_lo && + logical_sector < mddev->suspend_hi) + schedule(); goto retry; } -- cgit v1.2.3 From 7878cba9f0037f5599004b03a1260b32d9050360 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Jun 2009 15:37:49 +0200 Subject: block: Create bip slabs with embedded integrity vectors This patch restores stacking ability to the block layer integrity infrastructure by creating a set of dedicated bip slabs. Each bip slab has an embedded bio_vec array at the end. This cuts down on memory allocations and also simplifies the code compared to the original bvec version. Only the largest bip slab is backed by a mempool. The pool is contained in the bio_set so stacking drivers can ensure forward progress. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/md/dm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 3c6d4ee8921..9acd54a5cff 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1017,7 +1017,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_flags |= 1 << BIO_CLONED; if (bio_integrity(bio)) { - bio_integrity_clone(clone, bio, GFP_NOIO); + bio_integrity_clone(clone, bio, GFP_NOIO, bs); bio_integrity_trim(clone, bio_sector_offset(bio, idx, offset), len); } @@ -1045,7 +1045,7 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, clone->bi_flags &= ~(1 << BIO_SEG_VALID); if (bio_integrity(bio)) { - bio_integrity_clone(clone, bio, GFP_NOIO); + bio_integrity_clone(clone, bio, GFP_NOIO, bs); if (idx != bio->bi_idx || clone->bi_size < bio->bi_size) bio_integrity_trim(clone, -- cgit v1.2.3 From 018e0446890661504783f92388ecce7138c1566d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 26 Jun 2009 16:27:10 +0200 Subject: block: get rid of queue-private command filter The initial patches to support this through sysfs export were broken and have been if 0'ed out in any release. So lets just kill the code and reclaim some space in struct request_queue, if anyone would later like to fixup the sysfs bits, the git history can easily restore the removed bits. Signed-off-by: Jens Axboe --- drivers/scsi/sg.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 8201387b4da..ef142fd47a8 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -210,13 +210,11 @@ static void sg_put_dev(Sg_device *sdp); static int sg_allow_access(struct file *filp, unsigned char *cmd) { struct sg_fd *sfp = (struct sg_fd *)filp->private_data; - struct request_queue *q = sfp->parentdp->device->request_queue; if (sfp->parentdp->device->type == TYPE_SCANNER) return 0; - return blk_verify_command(&q->cmd_filter, - cmd, filp->f_mode & FMODE_WRITE); + return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE); } static int -- cgit v1.2.3 From a70c352a37671fe1ebcbd317b439aa4760f4ccb7 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Wed, 1 Jul 2009 11:51:18 +0300 Subject: xen: Use kcalloc() in xen_init_IRQ() The init_IRQ() function is now called with slab allocator initialized. Therefore, we must not use the bootmem allocator in xen_init_IRQ(). Fixes the following boot-time warning: ------------[ cut here ]------------ WARNING: at mm/bootmem.c:535 alloc_arch_preferred_bootmem+0x27/0x45() Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.30 #1 Call Trace: [] ? warn_slowpath_common+0x73/0xb0 [] ? pvclock_clocksource_read+0x49/0x90 [] ? alloc_arch_preferred_bootmem+0x27/0x45 [] ? ___alloc_bootmem_nopanic+0x39/0xc9 [] ? ___alloc_bootmem+0x9/0x2f [] ? xen_init_IRQ+0x25/0x61 [] ? start_kernel+0x1b5/0x29e ---[ end trace 4eaa2a86a8e2da22 ]--- Acked-by: Jeremy Fitzhardinge Tested-by: Christian Kujau Reported-by: Christian Kujau Signed-off-by: Pekka Enberg Cc: lists@nerdbynature.de Cc: jeremy.fitzhardinge@citrix.com LKML-Reference: <1246438278.22417.28.camel@penberg-laptop> Signed-off-by: Ingo Molnar --- drivers/xen/events.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 891d2e90753..abad71b1632 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -927,9 +927,9 @@ static struct irq_chip xen_dynamic_chip __read_mostly = { void __init xen_init_IRQ(void) { int i; - size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s); - cpu_evtchn_mask_p = alloc_bootmem(size); + cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s), + GFP_KERNEL); BUG_ON(cpu_evtchn_mask_p == NULL); init_evtchn_cpu_bindings(); -- cgit v1.2.3 From 63eeaf38251183ec2b1caee11e4a2c040cb5ce6c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 18 Jun 2009 16:56:52 -0700 Subject: drm/i915: enable error detection & state collection This patch enables error detection by enabling several types of error interrupts. When an error interrupt is received, the interrupt handler captures the error state; hopefully resulting in an accurate set of error data (error type, active head pointer, etc.). The new record is then available from sysfs. The current code will also dump the error state to the system log. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 1 + drivers/gpu/drm/i915/i915_drv.h | 19 +++++ drivers/gpu/drm/i915/i915_gem_debugfs.c | 34 ++++++++ drivers/gpu/drm/i915/i915_irq.c | 139 +++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 14 ++++ 5 files changed, 204 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index f112c769d53..f83364974a8 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1180,6 +1180,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) pci_enable_msi(dev->pdev); spin_lock_init(&dev_priv->user_irq_lock); + spin_lock_init(&dev_priv->error_lock); dev_priv->user_irq_refcount = 0; ret = drm_vblank_init(dev, I915_NUM_PIPE); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index bb4c2d387b6..596e119d3e0 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -133,6 +133,22 @@ struct sdvo_device_mapping { u8 initialized; }; +struct drm_i915_error_state { + u32 eir; + u32 pgtbl_er; + u32 pipeastat; + u32 pipebstat; + u32 ipeir; + u32 ipehr; + u32 instdone; + u32 acthd; + u32 instpm; + u32 instps; + u32 instdone1; + u32 seqno; + struct timeval time; +}; + typedef struct drm_i915_private { struct drm_device *dev; @@ -209,6 +225,9 @@ typedef struct drm_i915_private { int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ + spinlock_t error_lock; + struct drm_i915_error_state *first_error; + /* Register state */ u8 saveLBB; u32 saveDSPACNTR; diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c index 28146e405e8..cacae945338 100644 --- a/drivers/gpu/drm/i915/i915_gem_debugfs.c +++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c @@ -323,6 +323,39 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) return 0; } +static int i915_error_state(struct seq_file *m, void *unused) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_error_state *error; + unsigned long flags; + + spin_lock_irqsave(&dev_priv->error_lock, flags); + if (!dev_priv->first_error) { + seq_printf(m, "no error state collected\n"); + goto out; + } + + error = dev_priv->first_error; + + seq_printf(m, "EIR: 0x%08x\n", error->eir); + seq_printf(m, " PGTBL_ER: 0x%08x\n", error->pgtbl_er); + seq_printf(m, " INSTPM: 0x%08x\n", error->instpm); + seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir); + seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr); + seq_printf(m, " INSTDONE: 0x%08x\n", error->instdone); + seq_printf(m, " ACTHD: 0x%08x\n", error->acthd); + if (IS_I965G(dev)) { + seq_printf(m, " INSTPS: 0x%08x\n", error->instps); + seq_printf(m, " INSTDONE1: 0x%08x\n", error->instdone1); + } + +out: + spin_unlock_irqrestore(&dev_priv->error_lock, flags); + + return 0; +} static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST}, @@ -336,6 +369,7 @@ static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_ringbuffer_data", i915_ringbuffer_data, 0}, {"i915_ringbuffer_info", i915_ringbuffer_info, 0}, {"i915_batchbuffers", i915_batchbuffer_info, 0}, + {"i915_error_state", i915_error_state, 0}, }; #define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 228546f6eaa..17b308592c4 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -26,6 +26,7 @@ * */ +#include #include "drmP.h" #include "drm.h" #include "i915_drm.h" @@ -41,9 +42,10 @@ * we leave them always unmasked in IMR and then control enabling them through * PIPESTAT alone. */ -#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ - I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) +#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ + I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \ + I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) /** Interrupts that we mask and unmask at runtime. */ #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT) @@ -288,6 +290,47 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev) return ret; } +static void i915_capture_error_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_error_state *error; + unsigned long flags; + + spin_lock_irqsave(&dev_priv->error_lock, flags); + if (dev_priv->first_error) + goto out; + + error = kmalloc(sizeof(*error), GFP_ATOMIC); + if (!error) { + DRM_DEBUG("out ot memory, not capturing error state\n"); + goto out; + } + + error->eir = I915_READ(EIR); + error->pgtbl_er = I915_READ(PGTBL_ER); + error->pipeastat = I915_READ(PIPEASTAT); + error->pipebstat = I915_READ(PIPEBSTAT); + error->instpm = I915_READ(INSTPM); + if (!IS_I965G(dev)) { + error->ipeir = I915_READ(IPEIR); + error->ipehr = I915_READ(IPEHR); + error->instdone = I915_READ(INSTDONE); + error->acthd = I915_READ(ACTHD); + } else { + error->ipeir = I915_READ(IPEIR_I965); + error->ipehr = I915_READ(IPEHR_I965); + error->instdone = I915_READ(INSTDONE_I965); + error->instps = I915_READ(INSTPS); + error->instdone1 = I915_READ(INSTDONE1); + error->acthd = I915_READ(ACTHD_I965); + } + + dev_priv->first_error = error; + +out: + spin_unlock_irqrestore(&dev_priv->error_lock, flags); +} + irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -362,6 +405,80 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) I915_READ(PORT_HOTPLUG_STAT); } + if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) { + u32 eir = I915_READ(EIR); + + i915_capture_error_state(dev); + + printk(KERN_ERR "render error detected, EIR: 0x%08x\n", + eir); + if (eir & I915_ERROR_PAGE_TABLE) { + u32 pgtbl_err = I915_READ(PGTBL_ER); + printk(KERN_ERR "page table error\n"); + printk(KERN_ERR " PGTBL_ER: 0x%08x\n", + pgtbl_err); + I915_WRITE(PGTBL_ER, pgtbl_err); + (void)I915_READ(PGTBL_ER); + } + if (eir & I915_ERROR_MEMORY_REFRESH) { + printk(KERN_ERR "memory refresh error\n"); + printk(KERN_ERR "PIPEASTAT: 0x%08x\n", + pipea_stats); + printk(KERN_ERR "PIPEBSTAT: 0x%08x\n", + pipeb_stats); + /* pipestat has already been acked */ + } + if (eir & I915_ERROR_INSTRUCTION) { + printk(KERN_ERR "instruction error\n"); + printk(KERN_ERR " INSTPM: 0x%08x\n", + I915_READ(INSTPM)); + if (!IS_I965G(dev)) { + u32 ipeir = I915_READ(IPEIR); + + printk(KERN_ERR " IPEIR: 0x%08x\n", + I915_READ(IPEIR)); + printk(KERN_ERR " IPEHR: 0x%08x\n", + I915_READ(IPEHR)); + printk(KERN_ERR " INSTDONE: 0x%08x\n", + I915_READ(INSTDONE)); + printk(KERN_ERR " ACTHD: 0x%08x\n", + I915_READ(ACTHD)); + I915_WRITE(IPEIR, ipeir); + (void)I915_READ(IPEIR); + } else { + u32 ipeir = I915_READ(IPEIR_I965); + + printk(KERN_ERR " IPEIR: 0x%08x\n", + I915_READ(IPEIR_I965)); + printk(KERN_ERR " IPEHR: 0x%08x\n", + I915_READ(IPEHR_I965)); + printk(KERN_ERR " INSTDONE: 0x%08x\n", + I915_READ(INSTDONE_I965)); + printk(KERN_ERR " INSTPS: 0x%08x\n", + I915_READ(INSTPS)); + printk(KERN_ERR " INSTDONE1: 0x%08x\n", + I915_READ(INSTDONE1)); + printk(KERN_ERR " ACTHD: 0x%08x\n", + I915_READ(ACTHD_I965)); + I915_WRITE(IPEIR_I965, ipeir); + (void)I915_READ(IPEIR_I965); + } + } + + I915_WRITE(EIR, eir); + (void)I915_READ(EIR); + eir = I915_READ(EIR); + if (eir) { + /* + * some errors might have become stuck, + * mask them. + */ + DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir); + I915_WRITE(EMR, I915_READ(EMR) | eir); + I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); + } + } + I915_WRITE(IIR, iir); new_iir = I915_READ(IIR); /* Flush posted writes */ @@ -732,6 +849,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; + u32 error_mask; DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); @@ -768,6 +886,21 @@ int i915_driver_irq_postinstall(struct drm_device *dev) i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT); } + /* + * Enable some error detection, note the instruction error mask + * bit is reserved, so we leave it masked. + */ + if (IS_G4X(dev)) { + error_mask = ~(GM45_ERROR_PAGE_TABLE | + GM45_ERROR_MEM_PRIV | + GM45_ERROR_CP_PRIV | + I915_ERROR_MEMORY_REFRESH); + } else { + error_mask = ~(I915_ERROR_PAGE_TABLE | + I915_ERROR_MEMORY_REFRESH); + } + I915_WRITE(EMR, error_mask); + /* Disable pipe interrupt enables, clear pending pipe status */ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 88bf7521405..ad3d1b5db95 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -206,6 +206,7 @@ /* * Instruction and interrupt control regs */ +#define PGTBL_ER 0x02024 #define PRB0_TAIL 0x02030 #define PRB0_HEAD 0x02034 #define PRB0_START 0x02038 @@ -226,11 +227,18 @@ #define PRB1_HEAD 0x02044 /* 915+ only */ #define PRB1_START 0x02048 /* 915+ only */ #define PRB1_CTL 0x0204c /* 915+ only */ +#define IPEIR_I965 0x02064 +#define IPEHR_I965 0x02068 +#define INSTDONE_I965 0x0206c +#define INSTPS 0x02070 /* 965+ only */ +#define INSTDONE1 0x0207c /* 965+ only */ #define ACTHD_I965 0x02074 #define HWS_PGA 0x02080 #define HWS_ADDRESS_MASK 0xfffff000 #define HWS_START_ADDRESS_SHIFT 4 #define IPEIR 0x02088 +#define IPEHR 0x0208c +#define INSTDONE 0x02090 #define NOPID 0x02094 #define HWSTAM 0x02098 #define SCPD0 0x0209c /* 915+ only */ @@ -258,6 +266,12 @@ #define EIR 0x020b0 #define EMR 0x020b4 #define ESR 0x020b8 +#define GM45_ERROR_PAGE_TABLE (1<<5) +#define GM45_ERROR_MEM_PRIV (1<<4) +#define I915_ERROR_PAGE_TABLE (1<<4) +#define GM45_ERROR_CP_PRIV (1<<3) +#define I915_ERROR_MEMORY_REFRESH (1<<1) +#define I915_ERROR_INSTRUCTION (1<<0) #define INSTPM 0x020c0 #define ACTHD 0x020c8 #define FW_BLC 0x020d8 -- cgit v1.2.3 From 7662c8bd6545c12ac7b2b39e4554c3ba34789c50 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 26 Jun 2009 11:23:55 +0800 Subject: drm/i915: add FIFO watermark support This patch from jbarnes and myself adds FIFO watermark control to the driver. This is needed for both power saving features on new platforms with the so-called "big FIFO" and for controlling FIFO allocation between pipes in multi-head configurations. It's also necessary infrastructure to support things like framebuffer compression and configuration supportability checks (i.e. checking a configuration against available bandwidth). Signed-off-by: Jesse Barnes Signed-off-by: Shaohua Li Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 40 ++++ drivers/gpu/drm/i915/i915_drv.h | 4 + drivers/gpu/drm/i915/i915_irq.c | 4 + drivers/gpu/drm/i915/i915_reg.h | 46 +++- drivers/gpu/drm/i915/intel_display.c | 425 ++++++++++++++++++++++++++++++++++- 5 files changed, 513 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index f83364974a8..6096600aff6 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1082,6 +1082,44 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master) master->driver_priv = NULL; } +static void i915_get_mem_freq(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + u32 tmp; + + if (!IS_IGD(dev)) + return; + + tmp = I915_READ(CLKCFG); + + switch (tmp & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_533: + dev_priv->fsb_freq = 533; /* 133*4 */ + break; + case CLKCFG_FSB_800: + dev_priv->fsb_freq = 800; /* 200*4 */ + break; + case CLKCFG_FSB_667: + dev_priv->fsb_freq = 667; /* 167*4 */ + break; + case CLKCFG_FSB_400: + dev_priv->fsb_freq = 400; /* 100*4 */ + break; + } + + switch (tmp & CLKCFG_MEM_MASK) { + case CLKCFG_MEM_533: + dev_priv->mem_freq = 533; + break; + case CLKCFG_MEM_667: + dev_priv->mem_freq = 667; + break; + case CLKCFG_MEM_800: + dev_priv->mem_freq = 800; + break; + } +} + /** * i915_driver_load - setup chip and create an initial config * @dev: DRM device @@ -1165,6 +1203,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto out_iomapfree; } + i915_get_mem_freq(dev); + /* On the 945G/GM, the chipset reports the MSI capability on the * integrated graphics even though the support isn't actually there * according to the published specs. It doesn't appear to function diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 596e119d3e0..47ecb617e51 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -225,6 +225,8 @@ typedef struct drm_i915_private { int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ + unsigned int fsb_freq, mem_freq; + spinlock_t error_lock; struct drm_i915_error_state *first_error; @@ -889,6 +891,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev)) +/* dsparb controlled by hw only */ +#define DSPARB_HWCONTROL(dev) (IS_G4X(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 17b308592c4..7ba23a69a0c 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -376,11 +376,15 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) * Clear the PIPE(A|B)STAT regs before the IIR */ if (pipea_stats & 0x8000ffff) { + if (pipea_stats & PIPE_FIFO_UNDERRUN_STATUS) + DRM_DEBUG("pipe a underrun\n"); I915_WRITE(PIPEASTAT, pipea_stats); irq_received = 1; } if (pipeb_stats & 0x8000ffff) { + if (pipeb_stats & PIPE_FIFO_UNDERRUN_STATUS) + DRM_DEBUG("pipe b underrun\n"); I915_WRITE(PIPEBSTAT, pipeb_stats); irq_received = 1; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index ad3d1b5db95..6c085848409 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -275,7 +275,13 @@ #define INSTPM 0x020c0 #define ACTHD 0x020c8 #define FW_BLC 0x020d8 +#define FW_BLC2 0x020dc #define FW_BLC_SELF 0x020e0 /* 915+ only */ +#define FW_BLC_SELF_EN (1<<15) +#define MM_BURST_LENGTH 0x00700000 +#define MM_FIFO_WATERMARK 0x0001F000 +#define LM_BURST_LENGTH 0x00000700 +#define LM_FIFO_WATERMARK 0x0000001F #define MI_ARB_STATE 0x020e4 /* 915+ only */ #define CACHE_MODE_0 0x02120 /* 915+ only */ #define CM0_MASK_SHIFT 16 @@ -585,17 +591,21 @@ /* Clocking configuration register */ #define CLKCFG 0x10c00 -#define CLKCFG_FSB_400 (0 << 0) /* hrawclk 100 */ +#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ #define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ #define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ #define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ #define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ #define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ -/* this is a guess, could be 5 as well */ +/* Note, below two are guess */ #define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_1600_ALT (5 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ #define CLKCFG_FSB_MASK (7 << 0) - +#define CLKCFG_MEM_533 (1 << 4) +#define CLKCFG_MEM_667 (2 << 4) +#define CLKCFG_MEM_800 (3 << 4) +#define CLKCFG_MEM_MASK (7 << 4) + /** GM965 GM45 render standby register */ #define MCHBAR_RENDER_STANDBY 0x111B8 @@ -1595,6 +1605,34 @@ #define DSPARB_CSTART_SHIFT 7 #define DSPARB_BSTART_MASK (0x7f) #define DSPARB_BSTART_SHIFT 0 +#define DSPARB_BEND_SHIFT 9 /* on 855 */ +#define DSPARB_AEND_SHIFT 0 + +#define DSPFW1 0x70034 +#define DSPFW2 0x70038 +#define DSPFW3 0x7003c +#define IGD_SELF_REFRESH_EN (1<<30) + +/* FIFO watermark sizes etc */ +#define I915_FIFO_LINE_SIZE 64 +#define I830_FIFO_LINE_SIZE 32 +#define I945_FIFO_SIZE 127 /* 945 & 965 */ +#define I915_FIFO_SIZE 95 +#define I855GM_FIFO_SIZE 255 +#define I830_FIFO_SIZE 95 +#define I915_MAX_WM 0x3f + +#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */ +#define IGD_FIFO_LINE_SIZE 64 +#define IGD_MAX_WM 0x1ff +#define IGD_DFT_WM 0x3f +#define IGD_DFT_HPLLOFF_WM 0 +#define IGD_GUARD_WM 10 +#define IGD_CURSOR_FIFO 64 +#define IGD_CURSOR_MAX_WM 0x3f +#define IGD_CURSOR_DFT_WM 0 +#define IGD_CURSOR_GUARD_WM 5 + /* * The two pipe frame counter registers are not synchronized, so * reading a stable value is somewhat tricky. The following code diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 73e7b9cecac..a84ac05ef04 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -25,6 +25,7 @@ */ #include +#include #include "drmP.h" #include "intel_drv.h" #include "i915_drm.h" @@ -34,6 +35,7 @@ #include "drm_crtc_helper.h" bool intel_pipe_has_type (struct drm_crtc *crtc, int type); +static void intel_update_watermarks(struct drm_device *dev); typedef struct { /* given values */ @@ -1005,7 +1007,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int plane = intel_crtc->pipe; + int plane = intel_crtc->plane; int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; @@ -1335,8 +1337,10 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /* Give the overlay scaler a chance to enable if it's on this pipe */ //intel_crtc_dpms_video(crtc, true); TODO + intel_update_watermarks(dev); break; case DRM_MODE_DPMS_OFF: + intel_update_watermarks(dev); /* Give the overlay scaler a chance to disable if it's on this pipe */ //intel_crtc_dpms_video(crtc, FALSE); TODO @@ -1515,7 +1519,6 @@ static int intel_get_core_clock_speed(struct drm_device *dev) return 0; /* Silence gcc warning */ } - /** * Return the pipe currently connected to the panel fitter, * or -1 if the panel fitter is not present or not in use @@ -1585,6 +1588,420 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, } +struct intel_watermark_params { + unsigned long fifo_size; + unsigned long max_wm; + unsigned long default_wm; + unsigned long guard_size; + unsigned long cacheline_size; +}; + +/* IGD has different values for various configs */ +static struct intel_watermark_params igd_display_wm = { + IGD_DISPLAY_FIFO, + IGD_MAX_WM, + IGD_DFT_WM, + IGD_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params igd_display_hplloff_wm = { + IGD_DISPLAY_FIFO, + IGD_MAX_WM, + IGD_DFT_HPLLOFF_WM, + IGD_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params igd_cursor_wm = { + IGD_CURSOR_FIFO, + IGD_CURSOR_MAX_WM, + IGD_CURSOR_DFT_WM, + IGD_CURSOR_GUARD_WM, + IGD_FIFO_LINE_SIZE, +}; +static struct intel_watermark_params igd_cursor_hplloff_wm = { + IGD_CURSOR_FIFO, + IGD_CURSOR_MAX_WM, + IGD_CURSOR_DFT_WM, + IGD_CURSOR_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i945_wm_info = { + I915_FIFO_LINE_SIZE, + I915_MAX_WM, + 1, + 0, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i915_wm_info = { + I945_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I915_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i855_wm_info = { + I855GM_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I830_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i830_wm_info = { + I830_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I830_FIFO_LINE_SIZE +}; + +static unsigned long intel_calculate_wm(unsigned long clock_in_khz, + struct intel_watermark_params *wm, + int pixel_size, + unsigned long latency_ns) +{ + unsigned long bytes_required, wm_size; + + bytes_required = (clock_in_khz * pixel_size * latency_ns) / 1000000; + bytes_required /= wm->cacheline_size; + wm_size = wm->fifo_size - bytes_required - wm->guard_size; + + if (wm_size > wm->max_wm) + wm_size = wm->max_wm; + if (wm_size == 0) + wm_size = wm->default_wm; + return wm_size; +} + +struct cxsr_latency { + int is_desktop; + unsigned long fsb_freq; + unsigned long mem_freq; + unsigned long display_sr; + unsigned long display_hpll_disable; + unsigned long cursor_sr; + unsigned long cursor_hpll_disable; +}; + +static struct cxsr_latency cxsr_latency_table[] = { + {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ + {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ + {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ + + {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */ + {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */ + {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */ + + {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */ + {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */ + {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */ + + {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */ + {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */ + {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */ + + {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */ + {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */ + {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */ + + {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */ + {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */ + {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */ +}; + +static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb, + int mem) +{ + int i; + struct cxsr_latency *latency; + + if (fsb == 0 || mem == 0) + return NULL; + + for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) { + latency = &cxsr_latency_table[i]; + if (is_desktop == latency->is_desktop && + fsb == latency->fsb_freq && mem == latency->mem_freq) + break; + } + if (i >= ARRAY_SIZE(cxsr_latency_table)) { + DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n"); + return NULL; + } + return latency; +} + +static void igd_disable_cxsr(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; + + /* deactivate cxsr */ + reg = I915_READ(DSPFW3); + reg &= ~(IGD_SELF_REFRESH_EN); + I915_WRITE(DSPFW3, reg); + DRM_INFO("Big FIFO is disabled\n"); +} + +static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock, + int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; + unsigned long wm; + struct cxsr_latency *latency; + + latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq, + dev_priv->mem_freq); + if (!latency) { + DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n"); + igd_disable_cxsr(dev); + return; + } + + /* Display SR */ + wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size, + latency->display_sr); + reg = I915_READ(DSPFW1); + reg &= 0x7fffff; + reg |= wm << 23; + I915_WRITE(DSPFW1, reg); + DRM_DEBUG("DSPFW1 register is %x\n", reg); + + /* cursor SR */ + wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size, + latency->cursor_sr); + reg = I915_READ(DSPFW3); + reg &= ~(0x3f << 24); + reg |= (wm & 0x3f) << 24; + I915_WRITE(DSPFW3, reg); + + /* Display HPLL off SR */ + wm = intel_calculate_wm(clock, &igd_display_hplloff_wm, + latency->display_hpll_disable, I915_FIFO_LINE_SIZE); + reg = I915_READ(DSPFW3); + reg &= 0xfffffe00; + reg |= wm & 0x1ff; + I915_WRITE(DSPFW3, reg); + + /* cursor HPLL off SR */ + wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size, + latency->cursor_hpll_disable); + reg = I915_READ(DSPFW3); + reg &= ~(0x3f << 16); + reg |= (wm & 0x3f) << 16; + I915_WRITE(DSPFW3, reg); + DRM_DEBUG("DSPFW3 register is %x\n", reg); + + /* activate cxsr */ + reg = I915_READ(DSPFW3); + reg |= IGD_SELF_REFRESH_EN; + I915_WRITE(DSPFW3, reg); + + DRM_INFO("Big FIFO is enabled\n"); + + return; +} + +const static int latency_ns = 5000; /* default for non-igd platforms */ + + +static void i965_update_wm(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n"); + + /* 965 has limitations... */ + I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0)); + I915_WRITE(DSPFW2, (8 << 8) | (8 << 0)); +} + +static void i9xx_update_wm(struct drm_device *dev, int planea_clock, + int planeb_clock, int sr_hdisplay, int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK; + uint32_t fwater_hi = I915_READ(FW_BLC2) & LM_FIFO_WATERMARK; + int bsize, asize, cwm, bwm = 1, awm = 1, srwm = 1; + uint32_t dsparb = I915_READ(DSPARB); + int planea_entries, planeb_entries; + struct intel_watermark_params *wm_params; + unsigned long line_time_us; + int sr_clock, sr_entries = 0; + + if (IS_I965GM(dev) || IS_I945GM(dev)) + wm_params = &i945_wm_info; + else if (IS_I9XX(dev)) + wm_params = &i915_wm_info; + else + wm_params = &i855_wm_info; + + planea_entries = intel_calculate_wm(planea_clock, wm_params, + pixel_size, latency_ns); + planeb_entries = intel_calculate_wm(planeb_clock, wm_params, + pixel_size, latency_ns); + + DRM_DEBUG("FIFO entries - A: %d, B: %d\n", planea_entries, + planeb_entries); + + if (IS_I9XX(dev)) { + asize = dsparb & 0x7f; + bsize = (dsparb >> DSPARB_CSTART_SHIFT) & 0x7f; + } else { + asize = dsparb & 0x1ff; + bsize = (dsparb >> DSPARB_BEND_SHIFT) & 0x1ff; + } + DRM_DEBUG("FIFO size - A: %d, B: %d\n", asize, bsize); + + /* Two extra entries for padding */ + awm = asize - (planea_entries + 2); + bwm = bsize - (planeb_entries + 2); + + /* Sanity check against potentially bad FIFO allocations */ + if (awm <= 0) { + /* pipe is on but has too few FIFO entries */ + if (planea_entries != 0) + DRM_DEBUG("plane A needs more FIFO entries\n"); + awm = 1; + } + if (bwm <= 0) { + if (planeb_entries != 0) + DRM_DEBUG("plane B needs more FIFO entries\n"); + bwm = 1; + } + + /* + * Overlay gets an aggressive default since video jitter is bad. + */ + cwm = 2; + + /* Calc sr entries for one pipe configs */ + if (!planea_clock || !planeb_clock) { + sr_clock = planea_clock ? planea_clock : planeb_clock; + line_time_us = (sr_hdisplay * 1000) / sr_clock; + sr_entries = (((latency_ns / line_time_us) + 1) * pixel_size * + sr_hdisplay) / 1000; + sr_entries = roundup(sr_entries / wm_params->cacheline_size, 1); + if (sr_entries < wm_params->fifo_size) + srwm = wm_params->fifo_size - sr_entries; + } + + DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", + awm, bwm, cwm, srwm); + + fwater_lo = fwater_lo | ((bwm & 0x3f) << 16) | (awm & 0x3f); + fwater_hi = fwater_hi | (cwm & 0x1f); + + I915_WRITE(FW_BLC, fwater_lo); + I915_WRITE(FW_BLC2, fwater_hi); + if (IS_I9XX(dev)) + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f)); +} + +static void i830_update_wm(struct drm_device *dev, int planea_clock, + int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dsparb = I915_READ(DSPARB); + uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK; + unsigned int asize, awm; + int planea_entries; + + planea_entries = intel_calculate_wm(planea_clock, &i830_wm_info, + pixel_size, latency_ns); + + asize = dsparb & 0x7f; + + awm = asize - planea_entries; + + fwater_lo = fwater_lo | awm; + + I915_WRITE(FW_BLC, fwater_lo); +} + +/** + * intel_update_watermarks - update FIFO watermark values based on current modes + * + * Calculate watermark values for the various WM regs based on current mode + * and plane configuration. + * + * There are several cases to deal with here: + * - normal (i.e. non-self-refresh) + * - self-refresh (SR) mode + * - lines are large relative to FIFO size (buffer can hold up to 2) + * - lines are small relative to FIFO size (buffer can hold more than 2 + * lines), so need to account for TLB latency + * + * The normal calculation is: + * watermark = dotclock * bytes per pixel * latency + * where latency is platform & configuration dependent (we assume pessimal + * values here). + * + * The SR calculation is: + * watermark = (trunc(latency/line time)+1) * surface width * + * bytes per pixel + * where + * line time = htotal / dotclock + * and latency is assumed to be high, as above. + * + * The final value programmed to the register should always be rounded up, + * and include an extra 2 entries to account for clock crossings. + * + * We don't use the sprite, so we can ignore that. And on Crestline we have + * to set the non-SR watermarks to 8. + */ +static void intel_update_watermarks(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct intel_crtc *intel_crtc; + int sr_hdisplay = 0; + unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; + int enabled = 0, pixel_size = 0; + + if (DSPARB_HWCONTROL(dev)) + return; + + /* Get the clock config from both planes */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + intel_crtc = to_intel_crtc(crtc); + if (crtc->enabled) { + enabled++; + if (intel_crtc->plane == 0) { + DRM_DEBUG("plane A (pipe %d) clock: %d\n", + intel_crtc->pipe, crtc->mode.clock); + planea_clock = crtc->mode.clock; + } else { + DRM_DEBUG("plane B (pipe %d) clock: %d\n", + intel_crtc->pipe, crtc->mode.clock); + planeb_clock = crtc->mode.clock; + } + sr_hdisplay = crtc->mode.hdisplay; + sr_clock = crtc->mode.clock; + if (crtc->fb) + pixel_size = crtc->fb->bits_per_pixel / 8; + else + pixel_size = 4; /* by default */ + } + } + + if (enabled <= 0) + return; + + /* Single pipe configs can enable self refresh */ + if (enabled == 1 && IS_IGD(dev)) + igd_enable_cxsr(dev, sr_clock, pixel_size); + else if (IS_IGD(dev)) + igd_disable_cxsr(dev); + + if (IS_I965G(dev)) + i965_update_wm(dev); + else if (IS_I9XX(dev) || IS_MOBILE(dev)) + i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay, + pixel_size); + else + i830_update_wm(dev, planea_clock, pixel_size); +} + static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -1951,6 +2368,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); + + intel_update_watermarks(dev); + drm_vblank_post_modeset(dev, pipe); return ret; @@ -2439,6 +2859,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); intel_crtc->pipe = pipe; + intel_crtc->plane = pipe; for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; -- cgit v1.2.3 From a15a519ed6e5e644f5a33c213c00b0c1d3cfe683 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 1 Jul 2009 18:49:06 +0100 Subject: Fix iommu address space allocation This fixes kernel.org bug #13584. The IOVA code attempted to optimise the insertion of new ranges into the rbtree, with the unfortunate result that some ranges just didn't get inserted into the tree at all. Then those ranges would be handed out more than once, and things kind of go downhill from there. Introduced after 2.6.25 by ddf02886cbe665d67ca750750196ea5bf524b10b ("PCI: iova RB tree setup tweak"). Signed-off-by: David Woodhouse Cc: mark gross Cc: Andrew Morton Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/pci/iova.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c index 2287116e982..46dd440e231 100644 --- a/drivers/pci/iova.c +++ b/drivers/pci/iova.c @@ -1,9 +1,19 @@ /* - * Copyright (c) 2006, Intel Corporation. + * Copyright © 2006-2009, Intel Corporation. * - * This file is released under the GPLv2. + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. * - * Copyright (C) 2006-2008 Intel Corporation * Author: Anil S Keshavamurthy */ @@ -123,7 +133,15 @@ move_left: /* Insert the new_iova into domain rbtree by holding writer lock */ /* Add new node and rebalance tree. */ { - struct rb_node **entry = &((prev)), *parent = NULL; + struct rb_node **entry, *parent = NULL; + + /* If we have 'prev', it's a valid place to start the + insertion. Otherwise, start from the root. */ + if (prev) + entry = &prev; + else + entry = &iovad->rbroot.rb_node; + /* Figure out where to put new node */ while (*entry) { struct iova *this = container_of(*entry, -- cgit v1.2.3 From 6ff4fd05676bc5b5c930bef25901e489f7843660 Mon Sep 17 00:00:00 2001 From: "ling.ma@intel.com" Date: Thu, 25 Jun 2009 10:59:22 +0800 Subject: drm/i915: Set SSC frequency for 8xx chips correctly All 8xx class chips have the 66/48 split, not just 855. Signed-off-by: Ma Ling Reviewed-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_bios.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 716409a5724..da22863c05c 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -195,10 +195,12 @@ parse_general_features(struct drm_i915_private *dev_priv, dev_priv->lvds_use_ssc = general->enable_ssc; if (dev_priv->lvds_use_ssc) { - if (IS_I855(dev_priv->dev)) - dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48; - else - dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; + if (IS_I85X(dev_priv->dev)) + dev_priv->lvds_ssc_freq = + general->ssc_freq ? 66 : 48; + else + dev_priv->lvds_ssc_freq = + general->ssc_freq ? 100 : 96; } } } -- cgit v1.2.3 From c85994e4771025ef2a66533eb1a4c6c2217b9cda Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 1 Jul 2009 19:21:24 +0100 Subject: intel-iommu: Ensure that PTE writes are 64-bit atomic, even on i386 Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index ec7e032d5ab..eea1006c860 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -222,7 +222,12 @@ static inline void dma_set_pte_prot(struct dma_pte *pte, unsigned long prot) static inline u64 dma_pte_addr(struct dma_pte *pte) { - return (pte->val & VTD_PAGE_MASK); +#ifdef CONFIG_64BIT + return pte->val & VTD_PAGE_MASK; +#else + /* Must have a full atomic 64-bit read */ + return __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK; +#endif } static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn) @@ -712,6 +717,8 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, break; if (!dma_pte_present(pte)) { + uint64_t pteval; + tmp_page = alloc_pgtable_page(); if (!tmp_page) { @@ -719,15 +726,15 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, flags); return NULL; } - domain_flush_cache(domain, tmp_page, PAGE_SIZE); - dma_set_pte_pfn(pte, virt_to_dma_pfn(tmp_page)); - /* - * high level table always sets r/w, last level page - * table control read/write - */ - dma_set_pte_readable(pte); - dma_set_pte_writable(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); + domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE); + pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE; + if (cmpxchg64(&pte->val, 0ULL, pteval)) { + /* Someone else set it while we were thinking; use theirs. */ + free_pgtable_page(tmp_page); + } else { + dma_pte_addr(pte); + domain_flush_cache(domain, pte, sizeof(*pte)); + } } parent = phys_to_virt(dma_pte_addr(pte)); level--; @@ -1666,6 +1673,8 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, } while (nr_pages--) { + uint64_t tmp; + if (!sg_res) { sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT; sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset; @@ -1680,17 +1689,17 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, /* We don't need lock here, nobody else * touches the iova range */ - if (unlikely(dma_pte_addr(pte))) { + tmp = cmpxchg64(&pte->val, 0ULL, pteval); + if (tmp) { static int dumps = 5; - printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx)\n", - iov_pfn, pte->val); + printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n", + iov_pfn, tmp, (unsigned long long)pteval); if (dumps) { dumps--; debug_dma_dump_mappings(NULL); } WARN_ON(1); } - pte->val = pteval; pte++; if (!nr_pages || (unsigned long)pte >> VTD_PAGE_SHIFT != -- cgit v1.2.3 From 1c6a307a54668eda556f499c94e75086aaf8f80f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 1 Jul 2009 06:50:31 +0000 Subject: sh: LCDC dcache flush for deferred io Since writenotify on uncached vmas is unsupported in 2.6.31, live with cached framebuffer memory in the deferred io case for now and flush the dcache before forcing refresh. Signed-off-by: Paul Mundt Acked-by: Magnus damm --- drivers/video/sh_mobile_lcdcfb.c | 53 ++++++++++++++++++++++++++++++++++------ 1 file changed, 45 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index f10d2fbeda0..da983b720f0 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -17,6 +17,7 @@ #include #include #include +#include #include