From f7ea3d7fc03753b08e267fece19c56383e6b856f Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 13 May 2009 12:19:00 +0900 Subject: PCI ASPM: cleanup __pcie_aspm_check_state_one Clean up and simplify __pcie_aspm_check_state_one(). Acked-by: Shaohua Li Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 67 ++++++++++++++++++------------------------------- 1 file changed, 25 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 68a4d4b15f9..694ba565775 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -370,56 +370,39 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) } } -static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev, - unsigned int state) +/** + * __pcie_aspm_check_state_one - check latency for endpoint device. + * @endpoint: pointer to the struct pci_dev of endpoint device + * + * TBD: The latency from the endpoint to root complex vary per switch's + * upstream link state above the device. Here we just do a simple check + * which assumes all links above the device can be in L1 state, that + * is we just consider the worst case. If switch's upstream link can't + * be put into L0S/L1, then our check is too strictly. + */ +static u32 __pcie_aspm_check_state_one(struct pci_dev *endpoint, u32 state) { - struct pci_dev *parent_dev, *tmp_dev; - unsigned int l1_latency = 0; - struct pcie_link_state *link_state; + u32 l1_switch_latency = 0; struct aspm_latency *acceptable; + struct pcie_link_state *link; - parent_dev = pdev->bus->self; - link_state = parent_dev->link_state; - state &= link_state->aspm_support; - if (state == 0) - return 0; - acceptable = &link_state->acceptable[PCI_FUNC(pdev->devfn)]; + link = endpoint->bus->self->link_state; + state &= link->aspm_support; + acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)]; - /* - * Check latency for endpoint device. - * TBD: The latency from the endpoint to root complex vary per - * switch's upstream link state above the device. Here we just do a - * simple check which assumes all links above the device can be in L1 - * state, that is we just consider the worst case. If switch's upstream - * link can't be put into L0S/L1, then our check is too strictly. - */ - tmp_dev = pdev; - while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) { - parent_dev = tmp_dev->bus->self; - link_state = parent_dev->link_state; + while (link && state) { if ((state & PCIE_LINK_STATE_L0S) && - (link_state->latency.l0s > acceptable->l0s)) + (link->latency.l0s > acceptable->l0s)) state &= ~PCIE_LINK_STATE_L0S; - if ((state & PCIE_LINK_STATE_L1) && - (link_state->latency.l1 + l1_latency > acceptable->l1)) + (link->latency.l1 + l1_switch_latency > acceptable->l1)) state &= ~PCIE_LINK_STATE_L1; - - if (!parent_dev->bus->self) /* parent_dev is a root port */ - break; - else { - /* - * parent_dev is the downstream port of a switch, make - * tmp_dev the upstream port of the switch - */ - tmp_dev = parent_dev->bus->self; - /* - * every switch on the path to root complex need 1 more - * microsecond for L1. Spec doesn't mention L0S. - */ - if (state & PCIE_LINK_STATE_L1) - l1_latency += 1000; - } + link = link->parent; + /* + * Every switch on the path to root complex need 1 + * more microsecond for L1. Spec doesn't mention L0s. + */ + l1_switch_latency += 1000; } return state; } -- cgit v1.2.3