From f880632f963c3611d096d9373d16663c076310c7 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Wed, 6 Dec 2006 20:35:01 -0800 Subject: [PATCH] cciss: increase number of commands on controller Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds. Most Smart Array controllers can support up to 1024 commands but the E200 family can only support 128. To prevent annoying "fifo full" messages we define nr_cmds on a per controller basis by adding it the product table. Signed-off-by: Mike Miller Acked-by: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 74 ++++++++++++++++++++++++++------------------------- drivers/block/cciss.h | 2 ++ 2 files changed, 40 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index d1f65def8eb..0f976aaaf04 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -93,28 +93,29 @@ MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); /* board_id = Subsystem Device ID & Vendor ID * product = Marketing Name for the board * access = Address of the struct of function pointers + * nr_cmds = Number of commands supported by controller */ static struct board_type products[] = { - {0x40700E11, "Smart Array 5300", &SA5_access}, - {0x40800E11, "Smart Array 5i", &SA5B_access}, - {0x40820E11, "Smart Array 532", &SA5B_access}, - {0x40830E11, "Smart Array 5312", &SA5B_access}, - {0x409A0E11, "Smart Array 641", &SA5_access}, - {0x409B0E11, "Smart Array 642", &SA5_access}, - {0x409C0E11, "Smart Array 6400", &SA5_access}, - {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, - {0x40910E11, "Smart Array 6i", &SA5_access}, - {0x3225103C, "Smart Array P600", &SA5_access}, - {0x3223103C, "Smart Array P800", &SA5_access}, - {0x3234103C, "Smart Array P400", &SA5_access}, - {0x3235103C, "Smart Array P400i", &SA5_access}, - {0x3211103C, "Smart Array E200i", &SA5_access}, - {0x3212103C, "Smart Array E200", &SA5_access}, - {0x3213103C, "Smart Array E200i", &SA5_access}, - {0x3214103C, "Smart Array E200i", &SA5_access}, - {0x3215103C, "Smart Array E200i", &SA5_access}, - {0x3233103C, "Smart Array E500", &SA5_access}, - {0xFFFF103C, "Unknown Smart Array", &SA5_access}, + {0x40700E11, "Smart Array 5300", &SA5_access, 512}, + {0x40800E11, "Smart Array 5i", &SA5B_access, 512}, + {0x40820E11, "Smart Array 532", &SA5B_access, 512}, + {0x40830E11, "Smart Array 5312", &SA5B_access, 512}, + {0x409A0E11, "Smart Array 641", &SA5_access, 512}, + {0x409B0E11, "Smart Array 642", &SA5_access, 512}, + {0x409C0E11, "Smart Array 6400", &SA5_access, 512}, + {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512}, + {0x40910E11, "Smart Array 6i", &SA5_access, 512}, + {0x3225103C, "Smart Array P600", &SA5_access, 512}, + {0x3223103C, "Smart Array P800", &SA5_access, 512}, + {0x3234103C, "Smart Array P400", &SA5_access, 512}, + {0x3235103C, "Smart Array P400i", &SA5_access, 512}, + {0x3211103C, "Smart Array E200i", &SA5_access, 120}, + {0x3212103C, "Smart Array E200", &SA5_access, 120}, + {0x3213103C, "Smart Array E200i", &SA5_access, 120}, + {0x3214103C, "Smart Array E200i", &SA5_access, 120}, + {0x3215103C, "Smart Array E200i", &SA5_access, 120}, + {0x3233103C, "Smart Array E500", &SA5_access, 512}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -125,7 +126,6 @@ static struct board_type products[] = { #define MAX_CMD_RETRIES 3 #define READ_AHEAD 1024 -#define NR_CMDS 384 /* #commands that can be outstanding */ #define MAX_CTLR 32 /* Originally cciss driver only supports 8 major numbers */ @@ -404,8 +404,8 @@ static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool) } else { /* get it out of the controllers pool */ do { - i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS); - if (i == NR_CMDS) + i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); + if (i == h->nr_cmds) return NULL; } while (test_and_set_bit (i & (BITS_PER_LONG - 1), @@ -1247,7 +1247,7 @@ static void cciss_check_queues(ctlr_info_t *h) * in case the interrupt we serviced was from an ioctl and did not * free any new commands. */ - if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) + if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) return; /* We have room on the queue for more commands. Now we need to queue @@ -1266,7 +1266,7 @@ static void cciss_check_queues(ctlr_info_t *h) /* check to see if we have maxed out the number of commands * that can be placed on the queue. */ - if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) { + if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) { if (curr_queue == start_queue) { h->next_to_run = (start_queue + 1) % (h->highest_lun + 1); @@ -2140,7 +2140,7 @@ static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete) /* We've sent down an abort or reset, but something else has completed */ - if (srl->ncompletions >= (NR_CMDS + 2)) { + if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) { /* Uh oh. No room to save it for later... */ printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, " "reject list overflow, command lost!\n", ctlr); @@ -2677,7 +2677,7 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id) a1 = a; if ((a & 0x04)) { a2 = (a >> 3); - if (a2 >= NR_CMDS) { + if (a2 >= h->nr_cmds) { printk(KERN_WARNING "cciss: controller cciss%d failed, stopping.\n", h->ctlr); @@ -2960,6 +2960,7 @@ static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) if (board_id == products[i].board_id) { c->product_name = products[i].product_name; c->access = *(products[i].access); + c->nr_cmds = products[i].nr_cmds; break; } } @@ -2979,6 +2980,7 @@ static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) if (subsystem_vendor_id == PCI_VENDOR_ID_HP) { c->product_name = products[i-1].product_name; c->access = *(products[i-1].access); + c->nr_cmds = products[i-1].nr_cmds; printk(KERN_WARNING "cciss: This is an unknown " "Smart Array controller.\n" "cciss: Please update to the latest driver " @@ -3286,15 +3288,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not"); hba[i]->cmd_pool_bits = - kmalloc(((NR_CMDS + BITS_PER_LONG - + kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG - 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL); hba[i]->cmd_pool = (CommandList_struct *) pci_alloc_consistent(hba[i]->pdev, - NR_CMDS * sizeof(CommandList_struct), + hba[i]->nr_cmds * sizeof(CommandList_struct), &(hba[i]->cmd_pool_dhandle)); hba[i]->errinfo_pool = (ErrorInfo_struct *) pci_alloc_consistent(hba[i]->pdev, - NR_CMDS * sizeof(ErrorInfo_struct), + hba[i]->nr_cmds * sizeof(ErrorInfo_struct), &(hba[i]->errinfo_pool_dhandle)); if ((hba[i]->cmd_pool_bits == NULL) || (hba[i]->cmd_pool == NULL) @@ -3305,7 +3307,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, #ifdef CONFIG_CISS_SCSI_TAPE hba[i]->scsi_rejects.complete = kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) * - (NR_CMDS + 5), GFP_KERNEL); + (hba[i]->nr_cmds + 5), GFP_KERNEL); if (hba[i]->scsi_rejects.complete == NULL) { printk(KERN_ERR "cciss: out of memory"); goto clean4; @@ -3319,7 +3321,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, /* command and error info recs zeroed out before they are used */ memset(hba[i]->cmd_pool_bits, 0, - ((NR_CMDS + BITS_PER_LONG - + ((hba[i]->nr_cmds + BITS_PER_LONG - 1) / BITS_PER_LONG) * sizeof(unsigned long)); #ifdef CCISS_DEBUG @@ -3388,11 +3390,11 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, kfree(hba[i]->cmd_pool_bits); if (hba[i]->cmd_pool) pci_free_consistent(hba[i]->pdev, - NR_CMDS * sizeof(CommandList_struct), + hba[i]->nr_cmds * sizeof(CommandList_struct), hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); if (hba[i]->errinfo_pool) pci_free_consistent(hba[i]->pdev, - NR_CMDS * sizeof(ErrorInfo_struct), + hba[i]->nr_cmds * sizeof(ErrorInfo_struct), hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]); @@ -3459,9 +3461,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) } } - pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct), + pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct), hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); - pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(ErrorInfo_struct), + pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct), hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); kfree(hba[i]->cmd_pool_bits); #ifdef CONFIG_CISS_SCSI_TAPE diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index 562235c1445..0d765f9237b 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -60,6 +60,7 @@ struct ctlr_info __u32 board_id; void __iomem *vaddr; unsigned long paddr; + int nr_cmds; /* Number of commands allowed on this controller */ CfgTable_struct __iomem *cfgtable; int interrupts_enabled; int major; @@ -282,6 +283,7 @@ struct board_type { __u32 board_id; char *product_name; struct access_method *access; + int nr_cmds; /* Max cmds this kind of ctlr can handle. */ }; #define CCISS_LOCK(i) (&hba[i]->lock) -- cgit v1.2.3