From d30ce47da36cc3610ae5b0cea3f64b6fd389294a Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Wed, 19 Nov 2008 17:11:20 +0000 Subject: jffs2-choke-gc-thread.patch I've noticed some pretty poor behavior on OLPC machines after bootup, when gdm/X are starting. The GCD monopolizes the scheduler (which in turns means it gets to do more nand i/o), which results in processes taking much much longer than they should to start. As an example, on an OLPC machine going from OFW to a usable X (via auto-login gdm) takes 2m 30s. The majority of this time is consumed by the switch into graphical mode. With this patch, we cut a full 60s off of bootup time. After bootup, things are much snappier as well. Note that we have seen a CRC node error with this patch that causes the machine to fail to boot, but we've also seen that problem without this patch. Signed-off-by: Andres Salomon --- fs/jffs2/background.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'fs') diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c index 3cceef4ad2b..e9580104b6b 100644 --- a/fs/jffs2/background.c +++ b/fs/jffs2/background.c @@ -95,13 +95,17 @@ static int jffs2_garbage_collect_thread(void *_c) spin_unlock(&c->erase_completion_lock); - /* This thread is purely an optimisation. But if it runs when - other things could be running, it actually makes things a - lot worse. Use yield() and put it at the back of the runqueue - every time. Especially during boot, pulling an inode in - with read_inode() is much preferable to having the GC thread - get there first. */ - yield(); + /* Problem - immediately after bootup, the GCD spends a lot + * of time in places like jffs2_kill_fragtree(); so much so + * that userspace processes (like gdm and X) are starved + * despite plenty of cond_resched()s and renicing. Yield() + * doesn't help, either (presumably because userspace and GCD + * are generally competing for a higher latency resource - + * disk). + * This forces the GCD to slow the hell down. Pulling an + * inode in with read_inode() is much preferable to having + * the GC thread get there first. */ + schedule_timeout_interruptible(msecs_to_jiffies(50)); /* Put_super will send a SIGKILL and then wait on the sem. */ -- cgit v1.2.3