From f3db6e82034a6ea89191fdcc6b9a984dc0d5d533 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 5 Jan 2008 13:21:43 -0800 Subject: USB: at91_udc uses generic GPIO calls; minor cleanup Various small at91_udc cleanups: - Use generic GPIO calls, not older platform-specific ones - Use gpio_request()/gpio_free() - Use VERBOSE_DEBUG convention, not older VERBOSE - Fix sparse complaint about parameter type (changed to gfp_t) - Add missing newline to some rarely-seen debug messages - Fix some old cleanup bugs on probe() fault paths Also add a mechanism whereby rm9200 gpios can drive the D+ pullup through an inverting transistor, based on a patch from Steve Birtles. Most UDC drivers supporting a GPIO based pullup should probably have such an option, but testing it requries such a board in hand! Signed-off-by: David Brownell Cc: Steve Birtles Signed-off-by: Greg Kroah-Hartman --- include/asm-arm/arch-at91/board.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/asm-arm/arch-at91') diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 55b07bd5316..dc189f01c5b 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -40,7 +40,8 @@ /* USB Device */ struct at91_udc_data { u8 vbus_pin; /* high == host powering us */ - u8 pullup_pin; /* high == D+ pulled up */ + u8 pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ }; extern void __init at91_add_device_udc(struct at91_udc_data *data); -- cgit v1.2.3