From 05043d08045271eb5655308371dd285a852ef855 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Fri, 1 Dec 2006 11:51:19 +0100 Subject: [ARM] 3960/1: AT91: Final SAM9 intergration patches. This patch includes a number of small changes for integrating the AT91SAM9261 and AT91SAM0260 support. * Can only select support for one AT91 processor at a time. * Remove most of the remaining static memory mapping for the AT91RM9200. * Reserve 1Mb of memory below the IO for mapping the internal SRAM and any custom board-specific devices (ie, FPGA). * The SAM9260 has more serial ports, so increase the maximum to 7. * Define the standard chipselect addresses, and define other addresses relative to those. * CLOCK_TICK_RATE is different on the SAM926x's. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/hardware.h | 30 ++++++++++++++---------------- include/asm-arm/arch-at91rm9200/timex.h | 9 +++++++++ include/asm-arm/arch-at91rm9200/vmalloc.h | 2 +- 3 files changed, 24 insertions(+), 17 deletions(-) (limited to 'include/asm-arm/arch-at91rm9200') diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index d42e310584a..9ea5bfe0632 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -42,29 +42,27 @@ * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI) #define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) -#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI) -#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI) -#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP) /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) +#define AT91_SRAM_MAX SZ_1M +#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) /* Serial ports */ -#define ATMEL_MAX_UART 5 /* 4 USART3's and one DBGU port */ - -/* FLASH */ -#define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */ +#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ + +/* External Memory Map */ +#define AT91_CHIPSELECT_0 0x10000000 +#define AT91_CHIPSELECT_1 0x20000000 +#define AT91_CHIPSELECT_2 0x30000000 +#define AT91_CHIPSELECT_3 0x40000000 +#define AT91_CHIPSELECT_4 0x50000000 +#define AT91_CHIPSELECT_5 0x60000000 +#define AT91_CHIPSELECT_6 0x70000000 +#define AT91_CHIPSELECT_7 0x80000000 /* SDRAM */ -#define AT91_SDRAM_BASE 0x20000000 /* NCS1: SDRAM physical base address */ - -/* SmartMedia */ -#define AT91_SMARTMEDIA_BASE 0x40000000 /* NCS3: Smartmedia physical base address */ - -/* Compact Flash */ -#define AT91_CF_BASE 0x50000000 /* NCS4-NCS6: Compact Flash physical base address */ +#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h index 88687cefe6e..faeca45a8d4 100644 --- a/include/asm-arm/arch-at91rm9200/timex.h +++ b/include/asm-arm/arch-at91rm9200/timex.h @@ -23,6 +23,15 @@ #include +#if defined(CONFIG_ARCH_AT91RM9200) + #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) +#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261) + +#define AT91SAM9_MASTER_CLOCK 99300000 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#endif + #endif diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h index 4c367eb57f4..0a23b8c562b 100644 --- a/include/asm-arm/arch-at91rm9200/vmalloc.h +++ b/include/asm-arm/arch-at91rm9200/vmalloc.h @@ -21,6 +21,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (AT91_SRAM_VIRT_BASE & PGDIR_MASK) +#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) #endif -- cgit v1.2.3