From 7e36e2f5355ab87f8946041d044b34cda01e2077 Mon Sep 17 00:00:00 2001 From: Rod Whitby Date: Tue, 1 Apr 2008 10:53:23 +0100 Subject: [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby Signed-off-by: Russell King --- include/asm-arm/arch-ixp4xx/fsg.h | 50 ++++++++++++++++++++++++++++++++++ include/asm-arm/arch-ixp4xx/hardware.h | 1 + include/asm-arm/arch-ixp4xx/irqs.h | 7 +++++ 3 files changed, 58 insertions(+) create mode 100644 include/asm-arm/arch-ixp4xx/fsg.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h new file mode 100644 index 00000000000..c0100cc7981 --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/fsg.h @@ -0,0 +1,50 @@ +/* + * include/asm-arm/arch-ixp4xx/fsg.h + * + * Freecom FSG-3 platform specific definitions + * + * Author: Rod Whitby + * Author: Tomasz Chmielewski + * Maintainers: http://www.nslu2-linux.org + * + * Based on coyote.h by + * Copyright 2004 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#error "Do not include this directly, instead #include " +#endif + +#define FSG_SDA_PIN 12 +#define FSG_SCL_PIN 13 + +/* + * FSG PCI IRQs + */ +#define FSG_PCI_MAX_DEV 3 +#define FSG_PCI_IRQ_LINES 3 + + +/* PCI controller GPIO to IRQ pin mappings */ +#define FSG_PCI_INTA_PIN 6 +#define FSG_PCI_INTB_PIN 7 +#define FSG_PCI_INTC_PIN 5 + +/* Buttons */ + +#define FSG_SB_GPIO 4 /* sync button */ +#define FSG_RB_GPIO 9 /* reset button */ +#define FSG_UB_GPIO 10 /* usb button */ + +/* LEDs */ + +#define FSG_LED_WLAN_BIT 0 +#define FSG_LED_WAN_BIT 1 +#define FSG_LED_SATA_BIT 2 +#define FSG_LED_USB_BIT 4 +#define FSG_LED_RING_BIT 5 +#define FSG_LED_SYNC_BIT 7 diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h index 73e8dc36f6a..fa723a62785 100644 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ b/include/asm-arm/arch-ixp4xx/hardware.h @@ -45,5 +45,6 @@ #include "nslu2.h" #include "nas100d.h" #include "dsmg600.h" +#include "fsg.h" #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h index 11801605047..674af4a8414 100644 --- a/include/asm-arm/arch-ixp4xx/irqs.h +++ b/include/asm-arm/arch-ixp4xx/irqs.h @@ -128,4 +128,11 @@ #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 +/* + * Freecom FSG-3 Board IRQs + */ +#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6 +#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7 +#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 + #endif -- cgit v1.2.3 From e055d5bff318845f99c0fbf93245767fab8dce88 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 22 Apr 2008 01:43:27 +0100 Subject: [ARM] 5015/1: arm: remove ARCH_CO285 Trying to compile a kerel for ARCH_CO285 fails with the following error: <-- snip --> ... CC arch/arm/mach-footbridge/dc21285.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c: In function 'dc21285_base_address': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: 'PCICFG0_BASE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:57: error: 'PCICFG1_BASE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c: In function 'dc21285_scan_bus': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:286: error: implicit declaration of function 'pci_scan_bus' ... make[2]: *** [arch/arm/mach-footbridge/dc21285.o] Error 1 <-- snip --> This does not seem to be a recent breakage. The ARCH_CO285 support is old - kernel 2.2.0 contains first traces of it, an it seems to have been pretty complete in later 2.2 kernels. Since it seems to be completely dead code now this patch therefore removes it. Signed-off-by: Adrian Bunk Signed-off-by: Russell King --- include/asm-arm/arch-ebsa285/hardware.h | 26 -------------------------- include/asm-arm/arch-ebsa285/memory.h | 19 ------------------- include/asm-arm/arch-ebsa285/vmalloc.h | 4 ---- 3 files changed, 49 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h index daad8ee2d19..74610c2c63d 100644 --- a/include/asm-arm/arch-ebsa285/hardware.h +++ b/include/asm-arm/arch-ebsa285/hardware.h @@ -14,7 +14,6 @@ #include -#ifdef CONFIG_ARCH_FOOTBRIDGE /* Virtual Physical Size * 0xff800000 0x40000000 1MB X-Bus * 0xff000000 0x7c000000 1MB PCI I/O space @@ -50,31 +49,6 @@ #define PCIMEM_SIZE 0x01000000 #define PCIMEM_BASE 0xf0000000 -#elif defined(CONFIG_ARCH_CO285) -/* - * This is the COEBSA285 cut-down mapping - */ -#define PCIMEM_SIZE 0x80000000 -#define PCIMEM_BASE 0x80000000 - -#define WFLUSH_SIZE 0x01000000 -#define WFLUSH_BASE 0x7d000000 - -#define ARMCSR_SIZE 0x00100000 -#define ARMCSR_BASE 0x7cf00000 - -#define XBUS_SIZE 0x00020000 -#define XBUS_BASE 0x7cee0000 - -#define PCIO_SIZE 0x00010000 -#define PCIO_BASE 0x7ced0000 - -#else - -#error "Undefined footbridge architecture" - -#endif - #define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000)) #define XBUS_LED_AMBER (1 << 0) #define XBUS_LED_GREEN (1 << 1) diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h index cbd7ae64bcc..9019a3bf5ab 100644 --- a/include/asm-arm/arch-ebsa285/memory.h +++ b/include/asm-arm/arch-ebsa285/memory.h @@ -42,8 +42,6 @@ extern unsigned long __bus_to_virt(unsigned long); #endif -#if defined(CONFIG_ARCH_FOOTBRIDGE) - /* Task size and page offset at 3GB */ #define TASK_SIZE UL(0xbf000000) #define PAGE_OFFSET UL(0xc0000000) @@ -53,23 +51,6 @@ extern unsigned long __bus_to_virt(unsigned long); */ #define FLUSH_BASE 0xf9000000 -#elif defined(CONFIG_ARCH_CO285) - -/* Task size and page offset at 1.5GB */ -#define TASK_SIZE UL(0x5f000000) -#define PAGE_OFFSET UL(0x60000000) - -/* - * Cache flushing area. - */ -#define FLUSH_BASE 0x7e000000 - -#else - -#error "Undefined footbridge architecture" - -#endif - /* * Physical DRAM offset. */ diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h index 02598200997..e487d7e8c8a 100644 --- a/include/asm-arm/arch-ebsa285/vmalloc.h +++ b/include/asm-arm/arch-ebsa285/vmalloc.h @@ -7,8 +7,4 @@ */ -#ifdef CONFIG_ARCH_FOOTBRIDGE #define VMALLOC_END (PAGE_OFFSET + 0x30000000) -#else -#define VMALLOC_END (PAGE_OFFSET + 0x20000000) -#endif -- cgit v1.2.3 From 205bee6ad804d7034773b5978c74dde495df2301 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 13:57:26 +0100 Subject: [ARM] dyntick: Remove obsolete and unused ARM dyntick support dyntick is superseded by the clocksource/clockevent infrastructure, using the NO_HZ configuration option. No one implements dyntick on ARM anymore, so it's pointless keeping it around. Remove dyntick support. Signed-off-by: Russell King --- include/asm-arm/dyntick.h | 6 ------ include/asm-arm/hw_irq.h | 11 ----------- include/asm-arm/mach/time.h | 22 ---------------------- 3 files changed, 39 deletions(-) delete mode 100644 include/asm-arm/dyntick.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/dyntick.h b/include/asm-arm/dyntick.h deleted file mode 100644 index 19fab2d2b76..00000000000 --- a/include/asm-arm/dyntick.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASMARM_DYNTICK_H -#define _ASMARM_DYNTICK_H - -#include - -#endif /* _ASMARM_DYNTICK_H */ diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h index 98d594a973d..f1a08a50060 100644 --- a/include/asm-arm/hw_irq.h +++ b/include/asm-arm/hw_irq.h @@ -6,15 +6,4 @@ #include -#if defined(CONFIG_NO_IDLE_HZ) -# include -# define handle_dynamic_tick(action) \ - if (!(action->flags & IRQF_TIMER) && system_timer->dyn_tick) { \ - write_seqlock(&xtime_lock); \ - if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) \ - system_timer->dyn_tick->handler(irq, NULL); \ - write_sequnlock(&xtime_lock); \ - } -#endif - #endif diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h index 5dc357013b7..2fd36ea0130 100644 --- a/include/asm-arm/mach/time.h +++ b/include/asm-arm/mach/time.h @@ -41,30 +41,8 @@ struct sys_timer { #ifndef CONFIG_GENERIC_TIME unsigned long (*offset)(void); #endif - -#ifdef CONFIG_NO_IDLE_HZ - struct dyn_tick_timer *dyn_tick; -#endif -}; - -#ifdef CONFIG_NO_IDLE_HZ - -#define DYN_TICK_ENABLED (1 << 1) - -struct dyn_tick_timer { - spinlock_t lock; - unsigned int state; /* Current state */ - int (*enable)(void); /* Enables dynamic tick */ - int (*disable)(void); /* Disables dynamic tick */ - void (*reprogram)(unsigned long); /* Reprograms the timer */ - int (*handler)(int, void *); }; -void timer_dyn_reprogram(void); -#else -#define timer_dyn_reprogram() do { } while (0) -#endif - extern struct sys_timer *system_timer; extern void timer_tick(void); -- cgit v1.2.3 From 284d115ec9b70d7c38752d10ad393a198db07a4b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 17:32:16 +0100 Subject: [ARM] pxa: separate PXA25x and PXA27x UDC register definitions The PXA25x and PXA27x USB device controller register definitions are different. Currently, they live side by side in pxa-regs.h, but only one set is available depending on the setting of PXA25x or PXA27x. This means that if we build to support both PXA25x and PXA27x, the PXA27x definitions are unavailable, even to PXA27x specific code. Remove these definitions from pxa-regs.h, and place them in separate files. Include these files where appropriate. Note: according to the dependencies in drivers/usb/gadget/Kconfig, we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the platform devices from pxa27x.c and pxa3xx.c. Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 412 ---------------------------------- include/asm-arm/arch-pxa/pxa25x-udc.h | 163 ++++++++++++++ include/asm-arm/arch-pxa/pxa27x-udc.h | 256 +++++++++++++++++++++ 3 files changed, 419 insertions(+), 412 deletions(-) create mode 100644 include/asm-arm/arch-pxa/pxa25x-udc.h create mode 100644 include/asm-arm/arch-pxa/pxa27x-udc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 4b2ea1e95c5..68d74287730 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -599,418 +599,6 @@ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ -/* - * USB Device Controller - * PXA25x and PXA27x USB device controller registers are different. - */ -#if defined(CONFIG_PXA25x) - -#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ -#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#elif defined(CONFIG_PXA27x) - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ -#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation - Protocol Port Support */ -#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol - Support */ -#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol - Enable */ -#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ -#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ -#define UDCCR_ACN_S 11 -#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ -#define UDCCR_AIN_S 8 -#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface - Setting Number */ -#define UDCCR_AAISN_S 5 -#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active - Configuration */ -#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration - Error */ -#define UDCCR_UDR (1 << 2) /* UDC Resume */ -#define UDCCR_UDA (1 << 1) /* UDC Active */ -#define UDCCR_UDE (1 << 0) /* UDC Enable */ - -#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ -#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ -#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ -#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ -#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ -#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ -#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ - -#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ -#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ -#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ -#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ -#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ -#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ -#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ - -#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ -#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ -#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt - Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt - Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising - Edge Interrupt Enable */ -#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling - Edge Interrupt Enable */ -#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge - Interrupt Enable */ - -#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ - -#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ -#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ -#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ -#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ -#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ -#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ -#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ -#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ -#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ -#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ -#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ -#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ -#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ -#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ - -#define UDCCSN(x) __REG2(0x40600100, (x) << 2) -#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ -#define UDCCSR0_SA (1 << 7) /* Setup Active */ -#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ -#define UDCCSR0_FST (1 << 5) /* Force Stall */ -#define UDCCSR0_SST (1 << 4) /* Sent Stall */ -#define UDCCSR0_DME (1 << 3) /* DMA Enable */ -#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ -#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ -#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ - -#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ -#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ -#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ -#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ -#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ -#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ -#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ -#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ -#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ -#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ -#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ -#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ -#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ -#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ -#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ -#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ -#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ -#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ -#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ -#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ -#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ -#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ -#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ - -#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ -#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ -#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ -#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ -#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ -#define UDCCSR_FST (1 << 5) /* Force STALL */ -#define UDCCSR_SST (1 << 4) /* Sent STALL */ -#define UDCCSR_DME (1 << 3) /* DMA Enable */ -#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ -#define UDCCSR_PC (1 << 1) /* Packet Complete */ -#define UDCCSR_FS (1 << 0) /* FIFO needs service */ - -#define UDCBCN(x) __REG2(0x40600200, (x)<<2) -#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ -#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ -#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ -#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ -#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ -#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ -#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ -#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ -#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ -#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ -#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ -#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ -#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ -#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ -#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ -#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ -#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ -#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ -#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ -#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ -#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ -#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ -#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ -#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ - -#define UDCDN(x) __REG2(0x40600300, (x)<<2) -#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) -#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) -#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ -#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ -#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ -#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ -#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ -#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ -#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ -#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ -#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ -#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ -#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ -#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ -#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ -#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ -#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ -#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ -#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ -#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ -#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ -#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ -#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ -#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ -#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ -#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ - -#define UDCCN(x) __REG2(0x40600400, (x)<<2) -#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ -#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ -#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ -#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ -#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ -#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ -#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ -#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ -#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ -#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ -#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ -#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ -#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ -#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ -#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ -#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ -#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ -#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ -#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ -#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ -#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ -#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ -#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ - -#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ -#define UDCCONR_CN_S (25) -#define UDCCONR_IN (0x07 << 22) /* Interface Number */ -#define UDCCONR_IN_S (22) -#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ -#define UDCCONR_AISN_S (19) -#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ -#define UDCCONR_EN_S (15) -#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ -#define UDCCONR_ET_S (13) -#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ -#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ -#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ -#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ -#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ -#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ -#define UDCCONR_MPS_S (2) -#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ -#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ - - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDC_FNR_MASK (0x7ff) - -#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) -#define UDC_BCR_MASK (0x3ff) -#endif - /* * Fast Infrared Communication Port */ diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h new file mode 100644 index 00000000000..840305916b6 --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa25x-udc.h @@ -0,0 +1,163 @@ +#ifndef _ASM_ARCH_PXA25X_UDC_H +#define _ASM_ARCH_PXA25X_UDC_H + +#ifdef _ASM_ARCH_PXA27X_UDC_H +#error You can't include both PXA25x and PXA27x UDC support +#endif + +#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ +#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ +#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_UDE (1 << 0) /* UDC enable */ +#define UDCCR_UDA (1 << 1) /* UDC active */ +#define UDCCR_RSM (1 << 2) /* Device resume */ +#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ +#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ +#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ +#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ +#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ + +#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ +#define UDCCS0_IPR (1 << 1) /* IN packet ready */ +#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ +#define UDCCS0_SST (1 << 4) /* Sent stall */ +#define UDCCS0_FST (1 << 5) /* Force stall */ +#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ +#define UDCCS0_SA (1 << 7) /* Setup active */ + +/* Bulk IN - Endpoint 1,6,11 */ +#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ + +#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_BI_SST (1 << 4) /* Sent stall */ +#define UDCCS_BI_FST (1 << 5) /* Force stall */ +#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ + +/* Bulk OUT - Endpoint 2,7,12 */ +#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ + +#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_BO_DME (1 << 3) /* DMA enable */ +#define UDCCS_BO_SST (1 << 4) /* Sent stall */ +#define UDCCS_BO_FST (1 << 5) /* Force stall */ +#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ + +/* Isochronous IN - Endpoint 3,8,13 */ +#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ + +#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ + +/* Isochronous OUT - Endpoint 4,9,14 */ +#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ + +#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ +#define UDCCS_IO_DME (1 << 3) /* DMA enable */ +#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ + +/* Interrupt IN - Endpoint 5,10,15 */ +#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ + +#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_INT_SST (1 << 4) /* Sent stall */ +#define UDCCS_INT_FST (1 << 5) /* Force stall */ +#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ + +#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ +#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ +#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ +#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ +#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ +#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ +#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ +#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ +#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ +#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ +#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ +#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ +#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ +#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ +#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ +#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ +#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ +#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ +#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ +#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ +#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ +#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ +#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ +#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ + +#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ + +#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ +#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ +#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ +#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ +#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ +#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ +#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ +#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ + +#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ + +#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ +#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ +#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ +#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ +#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ +#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ +#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ +#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ + +#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ + +#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ +#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ +#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ +#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ +#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ +#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ +#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ +#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ + +#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ + +#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ +#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ +#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ +#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ +#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ +#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ +#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ +#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ + +#endif diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h new file mode 100644 index 00000000000..9cf0b1f8811 --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa27x-udc.h @@ -0,0 +1,256 @@ +#ifndef _ASM_ARCH_PXA27X_UDC_H +#define _ASM_ARCH_PXA27X_UDC_H + +#ifdef _ASM_ARCH_PXA25X_UDC_H +#error You can't include both PXA25x and PXA27x UDC support +#endif + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ +#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation + Protocol Port Support */ +#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol + Support */ +#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol + Enable */ +#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ +#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ +#define UDCCR_ACN_S 11 +#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ +#define UDCCR_AIN_S 8 +#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface + Setting Number */ +#define UDCCR_AAISN_S 5 +#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active + Configuration */ +#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration + Error */ +#define UDCCR_UDR (1 << 2) /* UDC Resume */ +#define UDCCR_UDA (1 << 1) /* UDC Active */ +#define UDCCR_UDE (1 << 0) /* UDC Enable */ + +#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ +#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ +#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ +#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ +#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ +#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ +#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ +#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ + +#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ +#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ +#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ +#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ +#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ +#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ +#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ + +#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ +#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ +#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt + Rising Edge Interrupt Enable */ +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt + Falling Edge Interrupt Enable */ +#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising + Edge Interrupt Enable */ +#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling + Edge Interrupt Enable */ +#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge + Interrupt Enable */ + +#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ + +#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ +#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ +#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ +#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ +#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ +#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ +#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ +#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ +#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ +#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ +#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ +#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ +#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ +#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ + +#define UDCCSN(x) __REG2(0x40600100, (x) << 2) +#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ +#define UDCCSR0_SA (1 << 7) /* Setup Active */ +#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define UDCCSR0_FST (1 << 5) /* Force Stall */ +#define UDCCSR0_SST (1 << 4) /* Sent Stall */ +#define UDCCSR0_DME (1 << 3) /* DMA Enable */ +#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ +#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ +#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ +#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ +#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ +#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ +#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ +#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ +#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ +#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ +#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ +#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ +#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ +#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ +#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ +#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ +#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ +#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ +#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ +#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ +#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ +#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ +#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ + +#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ +#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ +#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ +#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ +#define UDCCSR_FST (1 << 5) /* Force STALL */ +#define UDCCSR_SST (1 << 4) /* Sent STALL */ +#define UDCCSR_DME (1 << 3) /* DMA Enable */ +#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ +#define UDCCSR_PC (1 << 1) /* Packet Complete */ +#define UDCCSR_FS (1 << 0) /* FIFO needs service */ + +#define UDCBCN(x) __REG2(0x40600200, (x)<<2) +#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ +#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ +#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ +#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ +#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ +#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ +#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ +#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ +#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ +#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ +#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ +#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ +#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ +#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ +#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ +#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ +#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ +#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ +#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ +#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ +#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ +#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ +#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ +#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ + +#define UDCDN(x) __REG2(0x40600300, (x)<<2) +#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) +#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) +#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ +#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ +#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ +#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ +#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ +#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ +#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ +#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ +#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ +#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ +#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ +#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ +#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ +#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ +#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ +#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ +#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ +#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ +#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ +#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ +#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ +#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ +#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ +#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ + +#define UDCCN(x) __REG2(0x40600400, (x)<<2) +#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ +#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ +#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ +#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ +#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ +#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ +#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ +#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ +#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ +#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ +#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ +#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ +#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ +#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ +#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ +#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ +#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ +#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ +#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ +#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ +#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ +#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ +#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ + +#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ +#define UDCCONR_CN_S (25) +#define UDCCONR_IN (0x07 << 22) /* Interface Number */ +#define UDCCONR_IN_S (22) +#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ +#define UDCCONR_AISN_S (19) +#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ +#define UDCCONR_EN_S (15) +#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ +#define UDCCONR_ET_S (13) +#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ +#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ +#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ +#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ +#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ +#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ +#define UDCCONR_MPS_S (2) +#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ +#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ + + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDC_FNR_MASK (0x7ff) + +#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) +#define UDC_BCR_MASK (0x3ff) + +#endif -- cgit v1.2.3 From bedd78ca786c1d18c2a2785c7e40593dc9c9870f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:31:29 +0100 Subject: [RTC] remove old ARM rtc library code Now that all drivers using it are gone, remove the old ARM RTC library. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- include/asm-arm/rtc.h | 43 ------------------------------------------- 1 file changed, 43 deletions(-) delete mode 100644 include/asm-arm/rtc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/rtc.h b/include/asm-arm/rtc.h deleted file mode 100644 index 1a5c9232a91..00000000000 --- a/include/asm-arm/rtc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/include/asm-arm/rtc.h - * - * Copyright (C) 2003 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_RTC_H -#define ASMARM_RTC_H - -struct module; - -struct rtc_ops { - struct module *owner; - int (*open)(void); - void (*release)(void); - int (*ioctl)(unsigned int, unsigned long); - - int (*read_time)(struct rtc_time *); - int (*set_time)(struct rtc_time *); - int (*read_alarm)(struct rtc_wkalrm *); - int (*set_alarm)(struct rtc_wkalrm *); - int (*proc)(char *buf); -}; - -void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *); -void rtc_update(unsigned long, unsigned long); -int register_rtc(struct rtc_ops *); -void unregister_rtc(struct rtc_ops *); - -static inline int rtc_periodic_alarm(struct rtc_time *tm) -{ - return (tm->tm_year == -1) || - ((unsigned)tm->tm_mon >= 12) || - ((unsigned)(tm->tm_mday - 1) >= 31) || - ((unsigned)tm->tm_hour > 23) || - ((unsigned)tm->tm_min > 59) || - ((unsigned)tm->tm_sec > 59); -} - -#endif -- cgit v1.2.3 From 8ff7f2a46bd8831e1f1f2a694ec13921720180b7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 21 Feb 2008 16:30:10 +0100 Subject: There is no need to have BOOT_PARAMS_SIZE known outside of atags.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit atags.c was the only user of KEXEC_BOOT_PARAMS_SIZE and kexec.h was only included to get that definition. Signed-off-by: Uwe Kleine-König Acked-by: Uli Luckas --- include/asm-arm/kexec.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h index 47fe34d692d..c8986bb99ed 100644 --- a/include/asm-arm/kexec.h +++ b/include/asm-arm/kexec.h @@ -14,8 +14,6 @@ #define KEXEC_ARCH KEXEC_ARCH_ARM -#define KEXEC_BOOT_PARAMS_SIZE 1536 - #define KEXEC_ARM_ATAGS_OFFSET 0x1000 #define KEXEC_ARM_ZIMAGE_OFFSET 0x8000 -- cgit v1.2.3 From a4831fbe096a6f4f691fd71b041ce27add54088e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 21 May 2008 10:17:07 +0200 Subject: ns9xxx: fix assembler version of __REG2 to be consistent with the C version MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's not very critical because __REG2 isn't used in assembler code currently. Additionally some white space noise is fixed. Signed-off-by: Uwe Kleine-König --- include/asm-arm/arch-ns9xxx/hardware.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h index 0b7b34603f1..0dca11ce21f 100644 --- a/include/asm-arm/arch-ns9xxx/hardware.h +++ b/include/asm-arm/arch-ns9xxx/hardware.h @@ -66,13 +66,13 @@ __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field) # define REGGETIM_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) / \ + __REGGET(var, reg ## _ ## field((idx))) / \ __REGSHIFT(reg ## _ ## field((idx))) #else # define __REG(x) io_p2v(x) -# define __REG2(x, y) io_p2v((x) + (y)) +# define __REG2(x, y) io_p2v((x) + 4 * (y)) #endif -- cgit v1.2.3 From e0773410247f1e5fc6f7c52a4c5f3c6c9873d527 Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sat, 31 May 2008 14:24:02 +0530 Subject: ftrace: export kretprobe_trampoline for function tracer Follow suit from kprobe implementations on other archs and make kretprobe_trampoline non-static. Ftrace implmentation (more specifically, kernel/trace/trace.c) requires access to it (see-> http://kerneltrap.org/mailarchive/linux-kernel/2008/5/27/1955234). Signed-off-by: Abhishek Sagar Signed-off-by: Ingo Molnar --- include/asm-arm/kprobes.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h index c042194d3ab..b1a37876942 100644 --- a/include/asm-arm/kprobes.h +++ b/include/asm-arm/kprobes.h @@ -59,6 +59,7 @@ struct kprobe_ctlblk { }; void arch_remove_kprobe(struct kprobe *); +void kretprobe_trampoline(void); int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr); int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); -- cgit v1.2.3 From 1a7e612fa5ea0311232bd5418a40ec7280557789 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 31 May 2008 16:18:11 +0100 Subject: [ARM] 5074/1: fix warning: missing terminating ' character Signed-off-by: Dmitry Baryshkov Acked-by: Richard Purdie Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa27x-udc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h index 9cf0b1f8811..2d4e9cd3a5e 100644 --- a/include/asm-arm/arch-pxa/pxa27x-udc.h +++ b/include/asm-arm/arch-pxa/pxa27x-udc.h @@ -2,7 +2,7 @@ #define _ASM_ARCH_PXA27X_UDC_H #ifdef _ASM_ARCH_PXA25X_UDC_H -#error You can't include both PXA25x and PXA27x UDC support +#error You cannot include both PXA25x and PXA27x UDC support #endif #define UDCCR __REG(0x40600000) /* UDC Control Register */ -- cgit v1.2.3 From ca0a789ab9c83d8fdf28f5c2700b316cd5dec2f0 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Sat, 24 May 2008 17:47:04 +0100 Subject: [ARM] 5057/1: [AT91] Calao Systems - board files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: Grégory Hermant Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/timex.h | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h index f1933b0fa43..6e084eb839d 100644 --- a/include/asm-arm/arch-at91/timex.h +++ b/include/asm-arm/arch-at91/timex.h @@ -27,14 +27,29 @@ #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) -#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261) +#elif defined(CONFIG_ARCH_AT91SAM9260) + +#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260) +#define AT91SAM9_MASTER_CLOCK 90000000 +#else +#define AT91SAM9_MASTER_CLOCK 99300000 +#endif + +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#elif defined(CONFIG_ARCH_AT91SAM9261) #define AT91SAM9_MASTER_CLOCK 99300000 #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) #elif defined(CONFIG_ARCH_AT91SAM9263) +#if defined(CONFIG_MACH_USB_A9263) +#define AT91SAM9_MASTER_CLOCK 90000000 +#else #define AT91SAM9_MASTER_CLOCK 99959500 +#endif + #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) #elif defined(CONFIG_ARCH_AT91SAM9RL) -- cgit v1.2.3 From 53d7168026a440c4cba25468a3d926ddd7ab030a Mon Sep 17 00:00:00 2001 From: Stelian Pop Date: Sat, 5 Apr 2008 21:14:03 +0100 Subject: [ARM] 4933/1: AT91CAP9 UDPHS driver: generic AT91 parts. This is patch 1 of 2 adding support for the USB High Speed Device Port on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP as the AVR32 and the AT91SAM9RL. This patch makes the generic AT91 adaptations, mainly dealing with the addition of the UDPHS UTMI clock. Signed-off-by: Stelian Pop Acked-by: Haavard Skinnemoen Acked-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91_pmc.h | 7 ++++++- include/asm-arm/arch-at91/board.h | 4 ++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index c2b13c28015..2001e81f226 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -39,10 +39,14 @@ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ #define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ +#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ +#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ #define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ @@ -97,6 +101,7 @@ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index dc189f01c5b..1f247028686 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -36,6 +36,7 @@ #include #include #include +#include /* USB Device */ struct at91_udc_data { @@ -45,6 +46,9 @@ struct at91_udc_data { }; extern void __init at91_add_device_udc(struct at91_udc_data *data); + /* USB High Speed Device */ +extern void __init at91_add_device_usba(struct usba_platform_data *data); + /* Compact Flash */ struct at91_cf_data { u8 irq_pin; /* I/O IRQ */ -- cgit v1.2.3 From 7c8cf66529ebf95f1a5f34d1b69504d442b42630 Mon Sep 17 00:00:00 2001 From: Stelian Pop Date: Sat, 5 Apr 2008 21:15:25 +0100 Subject: [ARM] 4934/1: AT91CAP9 UDPHS driver: board and cpu integration. This is patch 2 of 2 adding support for the USB High Speed Device Port on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP as the AVR32 and the AT91SAM9RL. This patch declares the UDPHS ressources in the at91cap9 (cpu and adk board) files, wires up the atmel_usba_udc driver to them, and activates the driver in the defconfig. Signed-off-by: Stelian Pop Acked-by: Haavard Skinnemoen Acked-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91cap9.h | 2 +- include/asm-arm/arch-at91/at91cap9_matrix.h | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h index bac83adb505..6f14d9053ac 100644 --- a/include/asm-arm/arch-at91/at91cap9.h +++ b/include/asm-arm/arch-at91/at91cap9.h @@ -118,7 +118,7 @@ #define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ #define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */ +#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ #define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h index a641686b6c3..ddbd4873c84 100644 --- a/include/asm-arm/arch-at91/at91cap9_matrix.h +++ b/include/asm-arm/arch-at91/at91cap9_matrix.h @@ -106,6 +106,11 @@ #define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ #define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ +#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ +#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ +#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ +#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ + #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -- cgit v1.2.3 From ba45ca435060614e595a107ac323a36b52619d7d Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 8 Apr 2008 13:59:18 +0100 Subject: [ARM] 4940/1: AT91: UDPHS driver: SAM9RL board and cpu integration. Adds support for the USB High Speed Device Port on the AT91SAM9RL system on chip. The AT91SAM9RL uses the same UDPHS IP as the AVR32 and the AT91CAP9 (atmel_usba_udc driver). Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91sam9rl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h index 16d2832f6c0..622e56f81d4 100644 --- a/include/asm-arm/arch-at91/at91sam9rl.h +++ b/include/asm-arm/arch-at91/at91sam9rl.h @@ -110,6 +110,6 @@ #define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ #define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */ +#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ #endif -- cgit v1.2.3 From 0b0a9df6038752674e54e333cd247c877d29aab8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 May 2008 14:59:36 +0100 Subject: [ARM] pxa: separate out power manager and clock registers The power manager and core clock registers aren't present in PXA3 CPUs. Move them out of pxa-regs.h into pxa2xx-regs.h, and include pxa2xx-regs.h where necessary. Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 158 +------------------------------- include/asm-arm/arch-pxa/pxa2xx-regs.h | 162 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/system.h | 1 + 3 files changed, 165 insertions(+), 156 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 68d74287730..dce9308626b 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -825,120 +825,9 @@ #endif /* - * Power Manager + * Power Manager - see pxa2xx-regs.h */ -#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ -#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ -#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ -#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ -#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ -#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ -#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ -#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ -#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ -#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ -#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ -#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ -#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ - -#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ -#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */ -#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */ -#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ -#define PCMD(x) __REG2(0x40F00080, (x)<<2) -#define PCMD0 __REG(0x40F00080 + 0 * 4) -#define PCMD1 __REG(0x40F00080 + 1 * 4) -#define PCMD2 __REG(0x40F00080 + 2 * 4) -#define PCMD3 __REG(0x40F00080 + 3 * 4) -#define PCMD4 __REG(0x40F00080 + 4 * 4) -#define PCMD5 __REG(0x40F00080 + 5 * 4) -#define PCMD6 __REG(0x40F00080 + 6 * 4) -#define PCMD7 __REG(0x40F00080 + 7 * 4) -#define PCMD8 __REG(0x40F00080 + 8 * 4) -#define PCMD9 __REG(0x40F00080 + 9 * 4) -#define PCMD10 __REG(0x40F00080 + 10 * 4) -#define PCMD11 __REG(0x40F00080 + 11 * 4) -#define PCMD12 __REG(0x40F00080 + 12 * 4) -#define PCMD13 __REG(0x40F00080 + 13 * 4) -#define PCMD14 __REG(0x40F00080 + 14 * 4) -#define PCMD15 __REG(0x40F00080 + 15 * 4) -#define PCMD16 __REG(0x40F00080 + 16 * 4) -#define PCMD17 __REG(0x40F00080 + 17 * 4) -#define PCMD18 __REG(0x40F00080 + 18 * 4) -#define PCMD19 __REG(0x40F00080 + 19 * 4) -#define PCMD20 __REG(0x40F00080 + 20 * 4) -#define PCMD21 __REG(0x40F00080 + 21 * 4) -#define PCMD22 __REG(0x40F00080 + 22 * 4) -#define PCMD23 __REG(0x40F00080 + 23 * 4) -#define PCMD24 __REG(0x40F00080 + 24 * 4) -#define PCMD25 __REG(0x40F00080 + 25 * 4) -#define PCMD26 __REG(0x40F00080 + 26 * 4) -#define PCMD27 __REG(0x40F00080 + 27 * 4) -#define PCMD28 __REG(0x40F00080 + 28 * 4) -#define PCMD29 __REG(0x40F00080 + 29 * 4) -#define PCMD30 __REG(0x40F00080 + 30 * 4) -#define PCMD31 __REG(0x40F00080 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) -/* FIXME: PCMD_SQC need be checked. */ -#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, - bit 9 should be 0 all day. */ -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -#define PCFR_PI2C_EN (0x1 << 6) - -#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ -#define PSSR_RDH (1 << 5) /* Read Disable Hold */ -#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ -#define PSSR_STS (1 << 3) /* Standby Mode Status */ -#define PSSR_VFS (1 << 2) /* VDD Fault Status */ -#define PSSR_BFS (1 << 1) /* Battery Fault Status */ -#define PSSR_SSS (1 << 0) /* Software Sleep Status */ - -#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ - -#define PCFR_RO (1 << 15) /* RDH Override */ -#define PCFR_PO (1 << 14) /* PH Override */ -#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ -#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ -#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ -#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ -#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ -#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ -#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ -#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ -#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ -#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ - -#define RCSR_GPR (1 << 3) /* GPIO Reset */ -#define RCSR_SMR (1 << 2) /* Sleep Mode */ -#define RCSR_WDR (1 << 1) /* Watchdog Reset */ -#define RCSR_HWR (1 << 0) /* Hardware Reset */ - -#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ -#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ -#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ -#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ -#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ -#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ -#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ -#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ -#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ -#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ -#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ -#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ -#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ -#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ -#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ -#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ -#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ -#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ - /* * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h */ @@ -948,52 +837,9 @@ */ /* - * Core Clock + * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h */ -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ - -#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ - -#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ -#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ -#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ -#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ -#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ -#define CKEN_IM (20) /* Internal Memory Clock Enable */ -#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ -#define CKEN_USIM (18) /* USIM Unit Clock Enable */ -#define CKEN_MSL (17) /* MSL Unit Clock Enable */ -#define CKEN_LCD (16) /* LCD Unit Clock Enable */ -#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ -#define CKEN_I2C (14) /* I2C Unit Clock Enable */ -#define CKEN_FICP (13) /* FICP Unit Clock Enable */ -#define CKEN_MMC (12) /* MMC Unit Clock Enable */ -#define CKEN_USB (11) /* USB Unit Clock Enable */ -#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ -#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ -#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ -#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ -#define CKEN_I2S (8) /* I2S Unit Clock Enable */ -#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ -#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ -#define CKEN_STUART (5) /* STUART Unit Clock Enable */ -#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ -#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ -#define CKEN_SSP (3) /* SSP Unit Clock Enable */ -#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ -#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ -#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ -#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ - -#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ -#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ - #ifdef CONFIG_PXA27x /* Camera Interface */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h index 9553b54fa5b..73e0a329cf7 100644 --- a/include/asm-arm/arch-pxa/pxa2xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h @@ -81,4 +81,166 @@ #endif + +/* + * Power Manager + */ + +#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ +#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ +#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ +#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ +#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ +#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ +#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ +#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ +#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ +#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ +#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ +#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ + +#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ +#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ +#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ +#define PCMD(x) __REG2(0x40F00080, (x)<<2) +#define PCMD0 __REG(0x40F00080 + 0 * 4) +#define PCMD1 __REG(0x40F00080 + 1 * 4) +#define PCMD2 __REG(0x40F00080 + 2 * 4) +#define PCMD3 __REG(0x40F00080 + 3 * 4) +#define PCMD4 __REG(0x40F00080 + 4 * 4) +#define PCMD5 __REG(0x40F00080 + 5 * 4) +#define PCMD6 __REG(0x40F00080 + 6 * 4) +#define PCMD7 __REG(0x40F00080 + 7 * 4) +#define PCMD8 __REG(0x40F00080 + 8 * 4) +#define PCMD9 __REG(0x40F00080 + 9 * 4) +#define PCMD10 __REG(0x40F00080 + 10 * 4) +#define PCMD11 __REG(0x40F00080 + 11 * 4) +#define PCMD12 __REG(0x40F00080 + 12 * 4) +#define PCMD13 __REG(0x40F00080 + 13 * 4) +#define PCMD14 __REG(0x40F00080 + 14 * 4) +#define PCMD15 __REG(0x40F00080 + 15 * 4) +#define PCMD16 __REG(0x40F00080 + 16 * 4) +#define PCMD17 __REG(0x40F00080 + 17 * 4) +#define PCMD18 __REG(0x40F00080 + 18 * 4) +#define PCMD19 __REG(0x40F00080 + 19 * 4) +#define PCMD20 __REG(0x40F00080 + 20 * 4) +#define PCMD21 __REG(0x40F00080 + 21 * 4) +#define PCMD22 __REG(0x40F00080 + 22 * 4) +#define PCMD23 __REG(0x40F00080 + 23 * 4) +#define PCMD24 __REG(0x40F00080 + 24 * 4) +#define PCMD25 __REG(0x40F00080 + 25 * 4) +#define PCMD26 __REG(0x40F00080 + 26 * 4) +#define PCMD27 __REG(0x40F00080 + 27 * 4) +#define PCMD28 __REG(0x40F00080 + 28 * 4) +#define PCMD29 __REG(0x40F00080 + 29 * 4) +#define PCMD30 __REG(0x40F00080 + 30 * 4) +#define PCMD31 __REG(0x40F00080 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) +/* FIXME: PCMD_SQC need be checked. */ +#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, + bit 9 should be 0 all day. */ +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +#define PCFR_PI2C_EN (0x1 << 6) + +#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ +#define PSSR_RDH (1 << 5) /* Read Disable Hold */ +#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ +#define PSSR_STS (1 << 3) /* Standby Mode Status */ +#define PSSR_VFS (1 << 2) /* VDD Fault Status */ +#define PSSR_BFS (1 << 1) /* Battery Fault Status */ +#define PSSR_SSS (1 << 0) /* Software Sleep Status */ + +#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ + +#define PCFR_RO (1 << 15) /* RDH Override */ +#define PCFR_PO (1 << 14) /* PH Override */ +#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ +#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ +#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ +#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ +#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ +#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ +#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ +#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ +#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ +#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ + +#define RCSR_GPR (1 << 3) /* GPIO Reset */ +#define RCSR_SMR (1 << 2) /* Sleep Mode */ +#define RCSR_WDR (1 << 1) /* Watchdog Reset */ +#define RCSR_HWR (1 << 0) /* Hardware Reset */ + +#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ +#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ +#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ +#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ +#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ +#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ +#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ +#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ +#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ +#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ +#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ +#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ +#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ +#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ +#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ +#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ +#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ +#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ + +/* + * PXA2xx specific Core clock definitions + */ +#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ +#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ +#define CKEN __REG(0x41300004) /* Clock Enable Register */ +#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ + +#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ + +#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ +#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ +#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ +#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ +#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ +#define CKEN_IM (20) /* Internal Memory Clock Enable */ +#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ +#define CKEN_USIM (18) /* USIM Unit Clock Enable */ +#define CKEN_MSL (17) /* MSL Unit Clock Enable */ +#define CKEN_LCD (16) /* LCD Unit Clock Enable */ +#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ +#define CKEN_I2C (14) /* I2C Unit Clock Enable */ +#define CKEN_FICP (13) /* FICP Unit Clock Enable */ +#define CKEN_MMC (12) /* MMC Unit Clock Enable */ +#define CKEN_USB (11) /* USB Unit Clock Enable */ +#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ +#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ +#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ +#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ +#define CKEN_I2S (8) /* I2S Unit Clock Enable */ +#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ +#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ +#define CKEN_STUART (5) /* STUART Unit Clock Enable */ +#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ +#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ +#define CKEN_SSP (3) /* SSP Unit Clock Enable */ +#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ +#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ +#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ +#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ + +#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ +#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ + #endif diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index 9aa6c2e939e..ba7e132de1b 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -12,6 +12,7 @@ #include #include "hardware.h" +#include "pxa2xx-regs.h" #include "pxa-regs.h" static inline void arch_idle(void) -- cgit v1.2.3 From d4f4c0aa8e36f69e46360b3d3569dc15d6099894 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= Date: Fri, 6 Jun 2008 18:04:52 +0200 Subject: [MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen Signed-off-by: David Woodhouse --- include/asm-arm/arch-at91/at91_ecc.h | 38 ------------------------------------ 1 file changed, 38 deletions(-) delete mode 100644 include/asm-arm/arch-at91/at91_ecc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h deleted file mode 100644 index 1e5a8caca2d..00000000000 --- a/include/asm-arm/arch-at91/at91_ecc.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_ecc.h - * - * Error Corrected Code Controller (ECC) - System peripherals regsters. - * Based on AT91SAM9260 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef AT91_ECC_H -#define AT91_ECC_H - -#define AT91_ECC_CR 0x00 /* Control register */ -#define AT91_ECC_RST (1 << 0) /* Reset parity */ - -#define AT91_ECC_MR 0x04 /* Mode register */ -#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ -#define AT91_ECC_PAGESIZE_528 (0) -#define AT91_ECC_PAGESIZE_1056 (1) -#define AT91_ECC_PAGESIZE_2112 (2) -#define AT91_ECC_PAGESIZE_4224 (3) - -#define AT91_ECC_SR 0x08 /* Status register */ -#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ -#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ -#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ - -#define AT91_ECC_PR 0x0c /* Parity register */ -#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ -#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ - -#define AT91_ECC_NPR 0x10 /* NParity register */ -#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ - -#endif -- cgit v1.2.3 From 3c3796cc32b6e53653a5eb868dc959b8c2779db9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= Date: Fri, 6 Jun 2008 18:04:53 +0200 Subject: [MTD] [NAND] rename at91_nand -> atmel_nand: internal symbols MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is basically s/at91_nand/atmel_nand/g with some manual inspection. Signed-off-by: Håvard Skinnemoen Signed-off-by: David Woodhouse --- include/asm-arm/arch-at91/board.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index dc189f01c5b..6296922a684 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -85,7 +85,7 @@ struct at91_usbh_data { extern void __init at91_add_device_usbh(struct at91_usbh_data *data); /* NAND / SmartMedia */ -struct at91_nand_data { +struct atmel_nand_data { u8 enable_pin; /* chip enable */ u8 det_pin; /* card detect */ u8 rdy_pin; /* ready/busy */ @@ -94,7 +94,7 @@ struct at91_nand_data { u8 bus_width_16; /* buswidth is 16 bit */ struct mtd_partition* (*partition_info)(int, int*); }; -extern void __init at91_add_device_nand(struct at91_nand_data *data); +extern void __init at91_add_device_nand(struct atmel_nand_data *data); /* I2C*/ extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); -- cgit v1.2.3 From 9fc697b0b01416edae99dd9c5c49fb69c9282744 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Tue, 10 Jun 2008 08:57:27 +0100 Subject: [ARM] 5082/1: pxa: Definition for the third USB port control register UP3OCR This adds the definition for the third USB port control register UP3OCR. It is used on the EZX GSM mobile phones. Signed-off-by: Stefan Schmidt Acked-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa27x-udc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h index 2d4e9cd3a5e..bc1cf7d0773 100644 --- a/include/asm-arm/arch-pxa/pxa27x-udc.h +++ b/include/asm-arm/arch-pxa/pxa27x-udc.h @@ -82,6 +82,7 @@ Interrupt Enable */ #define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ +#define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */ #define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ #define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ -- cgit v1.2.3 From 2239aff6ab2b95af1f628eee7a809f21c41605b3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 31 Mar 2008 12:38:31 -0400 Subject: [ARM] cache align destination pointer when copying memory for some processors The implementation for memory copy functions on ARM had a (disabled) provision for aligning the source pointer before loading registers with data. Turns out that aligning the _destination_ pointer is much more useful, as the read side is already sufficiently helped with the use of preload. So this changes the definition of the CALGN() macro to target the destination pointer instead, and turns it on for Feroceon processors where the gain is very noticeable. Signed-off-by: Nicolas Pitre Signed-off-by: Lennert Buytenhek --- include/asm-arm/assembler.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h index fce83282082..911393b2c6f 100644 --- a/include/asm-arm/assembler.h +++ b/include/asm-arm/assembler.h @@ -55,6 +55,21 @@ #define PLD(code...) #endif +/* + * This can be used to enable code to cacheline align the destination + * pointer when bulk writing to memory. Experiments on StrongARM and + * XScale didn't show this a worthwhile thing to do when the cache is not + * set to write-allocate (this would need further testing on XScale when WA + * is used). + * + * On Feroceon there is much to gain however, regardless of cache mode. + */ +#ifdef CONFIG_CPU_FEROCEON +#define CALGN(code...) code +#else +#define CALGN(code...) +#endif + /* * Enable and disable interrupts */ -- cgit v1.2.3 From 6eef84a5496c678ab27b72bec0fc785c9cee063b Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 28 May 2008 16:20:56 +0200 Subject: [ARM] Orion: delete unused IO_SPACE_REMAP define This define isn't used anywhere in the kernel tree -- nuke it. Signed-off-by: Lennert Buytenhek Acked-by: Russell King --- include/asm-arm/arch-orion5x/io.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h index 50f8c880220..d9a4b2065e5 100644 --- a/include/asm-arm/arch-orion5x/io.h +++ b/include/asm-arm/arch-orion5x/io.h @@ -14,7 +14,6 @@ #include "orion5x.h" #define IO_SPACE_LIMIT 0xffffffff -#define IO_SPACE_REMAP ORION5X_PCI_SYS_IO_BASE static inline void __iomem * __arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) -- cgit v1.2.3 From d2b2a6bbc020e5a9a244f318d28515081e922882 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 31 May 2008 08:30:40 +0200 Subject: [ARM] Orion: add 88F5181L (Orion-VoIP) support Signed-off-by: Lennert Buytenhek Acked-by: Russell King --- include/asm-arm/arch-orion5x/orion5x.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h index 206ddd71e19..20f7b406a79 100644 --- a/include/asm-arm/arch-orion5x/orion5x.h +++ b/include/asm-arm/arch-orion5x/orion5x.h @@ -2,7 +2,7 @@ * include/asm-arm/arch-orion5x/orion5x.h * * Generic definitions of Orion SoC flavors: - * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. + * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2. * * Maintainer: Tzachi Perelstein * @@ -63,9 +63,11 @@ /******************************************************************************* * Supported Devices & Revisions ******************************************************************************/ -/* Orion-1 (88F5181) */ +/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ #define MV88F5181_DEV_ID 0x5181 #define MV88F5181_REV_B1 3 +#define MV88F5181L_REV_A0 8 +#define MV88F5181L_REV_A1 9 /* Orion-NAS (88F5182) */ #define MV88F5182_DEV_ID 0x5182 #define MV88F5182_REV_A2 2 -- cgit v1.2.3 From 0e3bc0503f7e7b5b0bd4416f43eeeca1b661e66e Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 4 Jun 2008 03:16:21 +0200 Subject: [ARM] Orion: use linux/serial_reg.h for Orion uncompress.h Signed-off-by: Lennert Buytenhek --- include/asm-arm/arch-orion5x/uncompress.h | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h index 5c13d4fafb4..7548cedf2d7 100644 --- a/include/asm-arm/arch-orion5x/uncompress.h +++ b/include/asm-arm/arch-orion5x/uncompress.h @@ -8,23 +8,38 @@ * warranty of any kind, whether express or implied. */ +#include #include -#define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) -#define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) - -#define LSR_THRE 0x20 +#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) static void putc(const char c) { - int j = 0x1000; - while (--j && !(*MV_UART_LSR & LSR_THRE)) + unsigned char *base = SERIAL_BASE; + int i; + + for (i = 0; i < 0x1000; i++) { + if (base[UART_LSR << 2] & UART_LSR_THRE) + break; barrier(); - *MV_UART_THR = c; + } + + base[UART_TX << 2] = c; } static void flush(void) { + unsigned char *base = SERIAL_BASE; + unsigned char mask; + int i; + + mask = UART_LSR_TEMT | UART_LSR_THRE; + + for (i = 0; i < 0x1000; i++) { + if ((base[UART_LSR << 2] & mask) == mask) + break; + barrier(); + } } /* -- cgit v1.2.3 From 79e90dd5aa95adfdc3117db8a559da3d0195ba58 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 28 May 2008 16:43:48 +0200 Subject: [ARM] Orion: nuke orion5x_{read,write} Nuke the Orion-specific orion5x_{read,write} wrappers. Signed-off-by: Lennert Buytenhek --- include/asm-arm/arch-orion5x/io.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h index d9a4b2065e5..59f1bc96a23 100644 --- a/include/asm-arm/arch-orion5x/io.h +++ b/include/asm-arm/arch-orion5x/io.h @@ -52,15 +52,12 @@ static inline void __iomem *__io(unsigned long addr) /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ -#define orion5x_read(r) __raw_readl(r) -#define orion5x_write(r, val) __raw_writel(val, r) - /* * These are not preempt-safe. Locks, if needed, must be taken * care of by the caller. */ -#define orion5x_setbits(r, mask) orion5x_write((r), orion5x_read(r) | (mask)) -#define orion5x_clrbits(r, mask) orion5x_write((r), orion5x_read(r) & ~(mask)) +#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r)) +#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r)) #endif -- cgit v1.2.3 From 1219715de70956557b9dedf3ee021a73d4f4ec52 Mon Sep 17 00:00:00 2001 From: Ke Wei Date: Fri, 23 May 2008 10:23:22 +0200 Subject: [ARM] Orion: add a separate BRIDGE_INT_TIMER1_CLR define Some Feroceon-based SoCs have an MBUS bridge interrupt controller that requires writing a one instead of a zero to clear edge interrupt sources such as timer expiry. This patch adds a new BRIDGE_INT_TIMER1_CLR define, which platform code can set to either ~BRIDGE_INT_TIMER1 (write-zero-to-clear) or BRIDGE_INT_TIMER1 (write-one-to-clear) depending on the platform. Signed-off-by: Lennert Buytenhek --- include/asm-arm/arch-orion5x/orion5x.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h index 20f7b406a79..10257f5c5e9 100644 --- a/include/asm-arm/arch-orion5x/orion5x.h +++ b/include/asm-arm/arch-orion5x/orion5x.h @@ -154,6 +154,7 @@ #define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) #define BRIDGE_INT_TIMER0 0x0002 #define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) #define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) #define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) -- cgit v1.2.3 From 777f9bebad3476b7dbf5cd8abbd3414139ca0e48 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 22 Jun 2008 22:45:02 +0200 Subject: [ARM] add Marvell Loki (88RC8480) SoC support The Marvell Loki (88RC8480) is an ARM SoC based on a Feroceon CPU core running at between 400 MHz and 1.0 GHz, and features a 64 bit DDR controller, 512K of internal SRAM, two x4 PCI-Express ports, two Gigabit Ethernet ports, two 4x SAS/SATA controllers, two UARTs, two TWSI controllers, and IDMA/XOR engines. This patch adds support for the Marvell LB88RC8480 Development Board, enabling the use of the PCIe interfaces, the ethernet interfaces, the TWSI interfaces and the UARTs. Signed-off-by: Lennert Buytenhek --- include/asm-arm/arch-loki/debug-macro.S | 20 +++++++ include/asm-arm/arch-loki/dma.h | 1 + include/asm-arm/arch-loki/entry-macro.S | 30 ++++++++++ include/asm-arm/arch-loki/hardware.h | 15 +++++ include/asm-arm/arch-loki/io.h | 26 +++++++++ include/asm-arm/arch-loki/irqs.h | 58 ++++++++++++++++++++ include/asm-arm/arch-loki/loki.h | 97 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-loki/memory.h | 14 +++++ include/asm-arm/arch-loki/system.h | 37 +++++++++++++ include/asm-arm/arch-loki/timex.h | 11 ++++ include/asm-arm/arch-loki/uncompress.h | 47 ++++++++++++++++ include/asm-arm/arch-loki/vmalloc.h | 5 ++ 12 files changed, 361 insertions(+) create mode 100644 include/asm-arm/arch-loki/debug-macro.S create mode 100644 include/asm-arm/arch-loki/dma.h create mode 100644 include/asm-arm/arch-loki/entry-macro.S create mode 100644 include/asm-arm/arch-loki/hardware.h create mode 100644 include/asm-arm/arch-loki/io.h create mode 100644 include/asm-arm/arch-loki/irqs.h create mode 100644 include/asm-arm/arch-loki/loki.h create mode 100644 include/asm-arm/arch-loki/memory.h create mode 100644 include/asm-arm/arch-loki/system.h create mode 100644 include/asm-arm/arch-loki/timex.h create mode 100644 include/asm-arm/arch-loki/uncompress.h create mode 100644 include/asm-arm/arch-loki/vmalloc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S new file mode 100644 index 00000000000..585502e9651 --- /dev/null +++ b/include/asm-arm/arch-loki/debug-macro.S @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-loki/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =LOKI_REGS_PHYS_BASE + ldrne \rx, =LOKI_REGS_VIRT_BASE + orr \rx, \rx, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/include/asm-arm/arch-loki/dma.h @@ -0,0 +1 @@ +/* empty */ diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S new file mode 100644 index 00000000000..693257cdbeb --- /dev/null +++ b/include/asm-arm/arch-loki/entry-macro.S @@ -0,0 +1,30 @@ +/* + * include/asm-arm/arch-loki/entry-macro.S + * + * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IRQ_VIRT_BASE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, [\base, #IRQ_CAUSE_OFF] + ldr \tmp, [\base, #IRQ_MASK_OFF] + mov \irqnr, #0 + ands \irqstat, \irqstat, \tmp + clzne \irqnr, \irqstat + rsbne \irqnr, \irqnr, #31 + .endm diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h new file mode 100644 index 00000000000..f65b01c733b --- /dev/null +++ b/include/asm-arm/arch-loki/hardware.h @@ -0,0 +1,15 @@ +/* + * include/asm-arm/arch-loki/hardware.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include "loki.h" + + +#endif diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h new file mode 100644 index 00000000000..e7418a915e7 --- /dev/null +++ b/include/asm-arm/arch-loki/io.h @@ -0,0 +1,26 @@ +/* + * include/asm-arm/arch-loki/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "loki.h" + +#define IO_SPACE_LIMIT 0xffffffff + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE) + + LOKI_PCIE0_IO_VIRT_BASE); +} + +#define __io(a) __io(a) +#define __mem_pci(a) (a) + + +#endif diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h new file mode 100644 index 00000000000..7e497143807 --- /dev/null +++ b/include/asm-arm/arch-loki/irqs.h @@ -0,0 +1,58 @@ +/* + * include/asm-arm/arch-loki/irqs.h + * + * IRQ definitions for Marvell Loki (88RC8480) SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include "loki.h" /* need GPIO_MAX */ + +/* + * Interrupt Controller + */ +#define IRQ_LOKI_PCIE_A_CPU_DRBL 0 +#define IRQ_LOKI_CPU_PCIE_A_DRBL 1 +#define IRQ_LOKI_PCIE_B_CPU_DRBL 2 +#define IRQ_LOKI_CPU_PCIE_B_DRBL 3 +#define IRQ_LOKI_COM_A_ERR 6 +#define IRQ_LOKI_COM_A_IN 7 +#define IRQ_LOKI_COM_A_OUT 8 +#define IRQ_LOKI_COM_B_ERR 9 +#define IRQ_LOKI_COM_B_IN 10 +#define IRQ_LOKI_COM_B_OUT 11 +#define IRQ_LOKI_DMA_A 12 +#define IRQ_LOKI_DMA_B 13 +#define IRQ_LOKI_SAS_A 14 +#define IRQ_LOKI_SAS_B 15 +#define IRQ_LOKI_DDR 16 +#define IRQ_LOKI_XOR 17 +#define IRQ_LOKI_BRIDGE 18 +#define IRQ_LOKI_PCIE_A_ERR 20 +#define IRQ_LOKI_PCIE_A_INT 21 +#define IRQ_LOKI_PCIE_B_ERR 22 +#define IRQ_LOKI_PCIE_B_INT 23 +#define IRQ_LOKI_GBE_A_INT 24 +#define IRQ_LOKI_GBE_B_INT 25 +#define IRQ_LOKI_DEV_ERR 26 +#define IRQ_LOKI_UART0 27 +#define IRQ_LOKI_UART1 28 +#define IRQ_LOKI_TWSI 29 +#define IRQ_LOKI_GPIO_23_0 30 +#define IRQ_LOKI_GPIO_25_24 31 + +/* + * Loki General Purpose Pins + */ +#define IRQ_LOKI_GPIO_START 32 +#define NR_GPIO_IRQS GPIO_MAX + +#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS) + + +#endif diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h new file mode 100644 index 00000000000..5dd05ee0a4e --- /dev/null +++ b/include/asm-arm/arch-loki/loki.h @@ -0,0 +1,97 @@ +/* + * include/asm-arm/arch-loki/loki.h + * + * Generic definitions for Marvell Loki (88RC8480) SoC flavors + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_LOKI_H +#define __ASM_ARCH_LOKI_H + +/* + * Marvell Loki (88RC8480) address maps. + * + * phys + * d0000000 on-chip peripheral registers + * e0000000 PCIe 0 Memory space + * e8000000 PCIe 1 Memory space + * f0000000 PCIe 0 I/O space + * f0100000 PCIe 1 I/O space + * + * virt phys size + * fed00000 d0000000 1M on-chip peripheral registers + * fee00000 f0000000 64K PCIe 0 I/O space + * fef00000 f0100000 64K PCIe 1 I/O space + */ + +#define LOKI_REGS_PHYS_BASE 0xd0000000 +#define LOKI_REGS_VIRT_BASE 0xfed00000 +#define LOKI_REGS_SIZE SZ_1M + +#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000 +#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000 +#define LOKI_PCIE0_IO_BUS_BASE 0x00000000 +#define LOKI_PCIE0_IO_SIZE SZ_64K + +#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000 +#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000 +#define LOKI_PCIE1_IO_BUS_BASE 0x00000000 +#define LOKI_PCIE1_IO_SIZE SZ_64K + +#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000 +#define LOKI_PCIE0_MEM_SIZE SZ_128M + +#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000 +#define LOKI_PCIE1_MEM_SIZE SZ_128M + +/* + * Register Map + */ +#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000) +#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) + +#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR 0x0004 +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_OFF 0x0000 +#define IRQ_MASK_OFF 0x0004 +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) + +#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000) + +#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000) + +#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000) + +#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000) +#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000) + +#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000) +#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000) + +#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000) +#define DDR_REG(x) (DDR_VIRT_BASE | (x)) + + +#define GPIO_MAX 8 + + +#endif diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h new file mode 100644 index 00000000000..835101e4987 --- /dev/null +++ b/include/asm-arm/arch-loki/memory.h @@ -0,0 +1,14 @@ +/* + * include/asm-arm/arch-loki/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + + +#endif diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h new file mode 100644 index 00000000000..a3568ac8ec3 --- /dev/null +++ b/include/asm-arm/arch-loki/system.h @@ -0,0 +1,37 @@ +/* + * include/asm-arm/arch-loki/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} + + +#endif diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h new file mode 100644 index 00000000000..940014f97ca --- /dev/null +++ b/include/asm-arm/arch-loki/timex.h @@ -0,0 +1,11 @@ +/* + * include/asm-arm/arch-loki/timex.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) + +#define LOKI_TCLK 180000000 diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h new file mode 100644 index 00000000000..89a0cf88d3a --- /dev/null +++ b/include/asm-arm/arch-loki/uncompress.h @@ -0,0 +1,47 @@ +/* + * include/asm-arm/arch-loki/uncompress.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + +#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) + +static void putc(const char c) +{ + unsigned char *base = SERIAL_BASE; + int i; + + for (i = 0; i < 0x1000; i++) { + if (base[UART_LSR << 2] & UART_LSR_THRE) + break; + barrier(); + } + + base[UART_TX << 2] = c; +} + +static void flush(void) +{ + unsigned char *base = SERIAL_BASE; + unsigned char mask; + int i; + + mask = UART_LSR_TEMT | UART_LSR_THRE; + + for (i = 0; i < 0x1000; i++) { + if ((base[UART_LSR << 2] & mask) == mask) + break; + barrier(); + } +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h new file mode 100644 index 00000000000..f5be0622049 --- /dev/null +++ b/include/asm-arm/arch-loki/vmalloc.h @@ -0,0 +1,5 @@ +/* + * include/asm-arm/arch-loki/vmalloc.h + */ + +#define VMALLOC_END 0xfe800000 -- cgit v1.2.3 From 836a8051d54525e0782f156dcfa3c13d30f22840 Mon Sep 17 00:00:00 2001 From: Stanislav Samsonov Date: Tue, 3 Jun 2008 11:24:40 +0300 Subject: [ARM] Feroceon: L1 cache range operation support This patch adds support for the L1 D cache range operations that are supported by the Marvell Discovery Duo and Marvell Kirkwood ARM SoCs. Signed-off-by: Stanislav Samsonov Acked-by: Saeed Bishara Reviewed-by: Nicolas Pitre Signed-off-by: Lennert Buytenhek --- include/asm-arm/cacheflush.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 759a97b56ee..b85d426bb52 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -95,11 +95,7 @@ #endif #if defined(CONFIG_CPU_FEROCEON) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE feroceon -# endif +# define MULTI_CACHE 1 #endif #if defined(CONFIG_CPU_V6) -- cgit v1.2.3 From 99c6dc117d27d6259214812bd0b113aaf467f600 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 22 Jun 2008 22:45:04 +0200 Subject: [ARM] Feroceon: L2 cache support This patch adds support for the unified Feroceon L2 cache controller as found in e.g. the Marvell Kirkwood and Marvell Discovery Duo families of ARM SoCs. Note that: - Page table walks are outer uncacheable on Kirkwood and Discovery Duo, since the ARMv5 spec provides no way to indicate outer cacheability of page table walks (specifying it in TTBR[4:3] is an ARMv6+ feature). This requires adding L2 cache clean instructions to proc-feroceon.S (dcache_clean_area(), set_pte()) as well as to tlbflush.h ({flush,clean}_pmd_entry()). The latter case is handled by defining a new TLB type (TLB_FEROCEON) which is almost identical to the v4wbi one but provides a TLB_L2CLEAN_FR flag. - The Feroceon L2 cache controller supports L2 range (i.e. 'clean L2 range by MVA' and 'invalidate L2 range by MVA') operations, and this patch uses those range operations for all Linux outer cache operations, as they are faster than the regular per-line operations. L2 range operations are not interruptible on this hardware, which avoids potential livelock issues, but can be bad for interrupt latency, so there is a compile-time tunable (MAX_RANGE_SIZE) which allows you to select the maximum range size to operate on at once. (Valid range is between one cache line and one 4KiB page, and must be a multiple of the line size.) Signed-off-by: Lennert Buytenhek --- include/asm-arm/plat-orion/cache-feroceon-l2.h | 11 ++++++++++ include/asm-arm/tlbflush.h | 30 ++++++++++++++++++++++++++ 2 files changed, 41 insertions(+) create mode 100644 include/asm-arm/plat-orion/cache-feroceon-l2.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-orion/cache-feroceon-l2.h b/include/asm-arm/plat-orion/cache-feroceon-l2.h new file mode 100644 index 00000000000..ba4e016d3ec --- /dev/null +++ b/include/asm-arm/plat-orion/cache-feroceon-l2.h @@ -0,0 +1,11 @@ +/* + * include/asm-arm/plat-orion/cache-feroceon-l2.h + * + * Copyright (C) 2008 Marvell Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +extern void __init feroceon_l2_init(int l2_wt_override); diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index 8c6bc1bb9d1..909656c747e 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -39,6 +39,7 @@ #define TLB_V6_D_ASID (1 << 17) #define TLB_V6_I_ASID (1 << 18) +#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ #define TLB_DCLEAN (1 << 30) #define TLB_WB (1 << 31) @@ -51,6 +52,7 @@ * v4 - ARMv4 without write buffer * v4wb - ARMv4 with write buffer without I TLB flush entry instruction * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction + * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction */ #undef _TLB @@ -103,6 +105,23 @@ # define v4wbi_always_flags (-1UL) #endif +#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_I_PAGE | TLB_V4_D_PAGE) + +#ifdef CONFIG_CPU_TLB_FEROCEON +# define fr_possible_flags fr_tlb_flags +# define fr_always_flags fr_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4wbi +# endif +#else +# define fr_possible_flags 0 +# define fr_always_flags (-1UL) +#endif + #define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \ TLB_V4_I_FULL | TLB_V4_D_FULL | \ TLB_V4_D_PAGE) @@ -245,12 +264,14 @@ extern struct cpu_tlb_fns cpu_tlb; #define possible_tlb_flags (v3_possible_flags | \ v4_possible_flags | \ v4wbi_possible_flags | \ + fr_possible_flags | \ v4wb_possible_flags | \ v6wbi_possible_flags) #define always_tlb_flags (v3_always_flags & \ v4_always_flags & \ v4wbi_always_flags & \ + fr_always_flags & \ v4wb_always_flags & \ v6wbi_always_flags) @@ -417,6 +438,11 @@ static inline void flush_pmd_entry(pmd_t *pmd) if (tlb_flag(TLB_DCLEAN)) asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_L2CLEAN_FR)) + asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" + : : "r" (pmd) : "cc"); + if (tlb_flag(TLB_WB)) dsb(); } @@ -428,6 +454,10 @@ static inline void clean_pmd_entry(pmd_t *pmd) if (tlb_flag(TLB_DCLEAN)) asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_L2CLEAN_FR)) + asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" + : : "r" (pmd) : "cc"); } #undef tlb_flag -- cgit v1.2.3 From 651c74c74bf84ba966b52588ba3329606f3fd8d4 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 22 Jun 2008 22:45:06 +0200 Subject: [ARM] add Marvell Kirkwood (88F6000) SoC support The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek --- include/asm-arm/arch-kirkwood/debug-macro.S | 20 ++++++ include/asm-arm/arch-kirkwood/dma.h | 1 + include/asm-arm/arch-kirkwood/entry-macro.S | 40 ++++++++++++ include/asm-arm/arch-kirkwood/hardware.h | 21 ++++++ include/asm-arm/arch-kirkwood/io.h | 26 ++++++++ include/asm-arm/arch-kirkwood/irqs.h | 63 ++++++++++++++++++ include/asm-arm/arch-kirkwood/kirkwood.h | 99 +++++++++++++++++++++++++++++ include/asm-arm/arch-kirkwood/memory.h | 14 ++++ include/asm-arm/arch-kirkwood/system.h | 37 +++++++++++ include/asm-arm/arch-kirkwood/timex.h | 11 ++++ include/asm-arm/arch-kirkwood/uncompress.h | 47 ++++++++++++++ include/asm-arm/arch-kirkwood/vmalloc.h | 5 ++ 12 files changed, 384 insertions(+) create mode 100644 include/asm-arm/arch-kirkwood/debug-macro.S create mode 100644 include/asm-arm/arch-kirkwood/dma.h create mode 100644 include/asm-arm/arch-kirkwood/entry-macro.S create mode 100644 include/asm-arm/arch-kirkwood/hardware.h create mode 100644 include/asm-arm/arch-kirkwood/io.h create mode 100644 include/asm-arm/arch-kirkwood/irqs.h create mode 100644 include/asm-arm/arch-kirkwood/kirkwood.h create mode 100644 include/asm-arm/arch-kirkwood/memory.h create mode 100644 include/asm-arm/arch-kirkwood/system.h create mode 100644 include/asm-arm/arch-kirkwood/timex.h create mode 100644 include/asm-arm/arch-kirkwood/uncompress.h create mode 100644 include/asm-arm/arch-kirkwood/vmalloc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S new file mode 100644 index 00000000000..f55fb8ad9ee --- /dev/null +++ b/include/asm-arm/arch-kirkwood/debug-macro.S @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-kirkwood/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE + ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE + orr \rx, \rx, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include diff --git a/include/asm-arm/arch-kirkwood/dma.h b/include/asm-arm/arch-kirkwood/dma.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/dma.h @@ -0,0 +1 @@ +/* empty */ diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S new file mode 100644 index 00000000000..fc6a43d9355 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/entry-macro.S @@ -0,0 +1,40 @@ +/* + * include/asm-arm/arch-kirkwood/entry-macro.S + * + * Low-level IRQ helper macros for Marvell Kirkwood platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IRQ_VIRT_BASE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ check low interrupts + ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] + ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] + mov \irqnr, #31 + ands \irqstat, \irqstat, \tmp + bne 1001f + + @ if no low interrupts set, check high interrupts + ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] + ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF] + mov \irqnr, #63 + ands \irqstat, \irqstat, \tmp + + @ find first active interrupt source +1001: clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h new file mode 100644 index 00000000000..e695719771a --- /dev/null +++ b/include/asm-arm/arch-kirkwood/hardware.h @@ -0,0 +1,21 @@ +/* + * include/asm-arm/arch-kirkwood/hardware.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include "kirkwood.h" + +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */ + + +#endif diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h new file mode 100644 index 00000000000..0ef6e95f5d5 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/io.h @@ -0,0 +1,26 @@ +/* + * include/asm-arm/arch-kirkwood/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "kirkwood.h" + +#define IO_SPACE_LIMIT 0xffffffff + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE) + + KIRKWOOD_PCIE_IO_VIRT_BASE); +} + +#define __io(a) __io(a) +#define __mem_pci(a) (a) + + +#endif diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h new file mode 100644 index 00000000000..2e7b5da6335 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/irqs.h @@ -0,0 +1,63 @@ +/* + * include/asm-arm/arch-kirkwood/irqs.h + * + * IRQ definitions for Marvell Kirkwood SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include "kirkwood.h" /* need GPIO_MAX */ + +/* + * Low Interrupt Controller + */ +#define IRQ_KIRKWOOD_HIGH_SUM 0 +#define IRQ_KIRKWOOD_BRIDGE 1 +#define IRQ_KIRKWOOD_HOST2CPU 2 +#define IRQ_KIRKWOOD_CPU2HOST 3 +#define IRQ_KIRKWOOD_XOR_00 5 +#define IRQ_KIRKWOOD_XOR_01 6 +#define IRQ_KIRKWOOD_XOR_10 7 +#define IRQ_KIRKWOOD_XOR_11 8 +#define IRQ_KIRKWOOD_PCIE 9 +#define IRQ_KIRKWOOD_GE00_SUM 11 +#define IRQ_KIRKWOOD_GE01_SUM 15 +#define IRQ_KIRKWOOD_USB 19 +#define IRQ_KIRKWOOD_SATA 21 +#define IRQ_KIRKWOOD_CRYPTO 22 +#define IRQ_KIRKWOOD_SPI 23 +#define IRQ_KIRKWOOD_I2S 24 +#define IRQ_KIRKWOOD_TS_0 26 +#define IRQ_KIRKWOOD_SDIO 28 +#define IRQ_KIRKWOOD_TWSI 29 +#define IRQ_KIRKWOOD_AVB 30 +#define IRQ_KIRKWOOD_TDMI 31 + +/* + * High Interrupt Controller + */ +#define IRQ_KIRKWOOD_UART_0 33 +#define IRQ_KIRKWOOD_UART_1 34 +#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35 +#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36 +#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37 +#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38 +#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39 +#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40 +#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41 + +/* + * KIRKWOOD General Purpose Pins + */ +#define IRQ_KIRKWOOD_GPIO_START 64 +#define NR_GPIO_IRQS GPIO_MAX + +#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS) + + +#endif diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h new file mode 100644 index 00000000000..520250dbd8a --- /dev/null +++ b/include/asm-arm/arch-kirkwood/kirkwood.h @@ -0,0 +1,99 @@ +/* + * include/asm-arm/arch-kirkwood/kirkwood.h + * + * Generic definitions for Marvell Kirkwood SoC flavors: + * 88F6180, 88F6192 and 88F6281. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_KIRKWOOD_H +#define __ASM_ARCH_KIRKWOOD_H + +/* + * Marvell Kirkwood address maps. + * + * phys + * e0000000 PCIe Memory space + * f1000000 on-chip peripheral registers + * f2000000 PCIe I/O space + * f3000000 NAND controller address window + * + * virt phys size + * fee00000 f1000000 1M on-chip peripheral registers + * fef00000 f2000000 1M PCIe I/O space + */ + +#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 +#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K + * is the minimal window size + */ + +#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 +#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 +#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 +#define KIRKWOOD_PCIE_IO_SIZE SZ_1M + +#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 +#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000 +#define KIRKWOOD_REGS_SIZE SZ_1M + +#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 +#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M + +/* + * MBUS bridge registers. + */ +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_RESET 0x00000002 +//#define L2_WRITETHROUGH 0x00020000 +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +/* + * Register Map + */ +#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) + +#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) +#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) +#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) +#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) +#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) +#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) + +#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) + +#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) + +#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) +#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) + +#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) + + +#define GPIO_MAX 50 + + +#endif diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h new file mode 100644 index 00000000000..e5108f408ce --- /dev/null +++ b/include/asm-arm/arch-kirkwood/memory.h @@ -0,0 +1,14 @@ +/* + * include/asm-arm/arch-kirkwood/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + + +#endif diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h new file mode 100644 index 00000000000..8dde7e37985 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/system.h @@ -0,0 +1,37 @@ +/* + * include/asm-arm/arch-kirkwood/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} + + +#endif diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h new file mode 100644 index 00000000000..82122e134e3 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/timex.h @@ -0,0 +1,11 @@ +/* + * include/asm-arm/arch-kirkwood/timex.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) + +#define KIRKWOOD_TCLK 166666667 diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h new file mode 100644 index 00000000000..a9062b6d768 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/uncompress.h @@ -0,0 +1,47 @@ +/* + * include/asm-arm/arch-kirkwood/uncompress.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + +#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) + +static void putc(const char c) +{ + unsigned char *base = SERIAL_BASE; + int i; + + for (i = 0; i < 0x1000; i++) { + if (base[UART_LSR << 2] & UART_LSR_THRE) + break; + barrier(); + } + + base[UART_TX << 2] = c; +} + +static void flush(void) +{ + unsigned char *base = SERIAL_BASE; + unsigned char mask; + int i; + + mask = UART_LSR_TEMT | UART_LSR_THRE; + + for (i = 0; i < 0x1000; i++) { + if ((base[UART_LSR << 2] & mask) == mask) + break; + barrier(); + } +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h new file mode 100644 index 00000000000..41852c6e77f --- /dev/null +++ b/include/asm-arm/arch-kirkwood/vmalloc.h @@ -0,0 +1,5 @@ +/* + * include/asm-arm/arch-kirkwood/vmalloc.h + */ + +#define VMALLOC_END 0xfe800000 -- cgit v1.2.3 From a9311cfed241ebcd6b5f9be5c8c6d519bf22f9e7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 22 Jun 2008 22:45:09 +0200 Subject: [ARM] Orion: PCIe x4/x1 detection support The Discovery Duo (MV78xx0) has two x4 PCIe ports which can either be used in x4 mode or in quad x1 mode. This patch adds an accessor function to the generic plat-orion PCIe handling code to detect in which of the two modes we're running (which is determined by strap pins and/or configured by the bootloader). Signed-off-by: Lennert Buytenhek --- include/asm-arm/plat-orion/pcie.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h index 6434ac685d2..e61b7bd97af 100644 --- a/include/asm-arm/plat-orion/pcie.h +++ b/include/asm-arm/plat-orion/pcie.h @@ -14,6 +14,7 @@ u32 orion_pcie_dev_id(void __iomem *base); u32 orion_pcie_rev(void __iomem *base); int orion_pcie_link_up(void __iomem *base); +int orion_pcie_x4_mode(void __iomem *base); int orion_pcie_get_local_bus_nr(void __iomem *base); void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); void orion_pcie_setup(void __iomem *base, -- cgit v1.2.3 From 794d15b25df5dda10efba600d6dd6cd74a7aa9cb Mon Sep 17 00:00:00 2001 From: Stanislav Samsonov Date: Sun, 22 Jun 2008 22:45:10 +0200 Subject: [ARM] add Marvell 78xx0 ARM SoC support The Marvell Discovery Duo (MV78xx0) is a family of ARM SoCs featuring (depending on the model) one or two Feroceon CPU cores with 512K of L2 cache and VFP coprocessors running at (depending on the model) between 800 MHz and 1.2 GHz, and features a DDR2 controller, two PCIe interfaces that can each run either in x4 or quad x1 mode, three USB 2.0 interfaces, two 3Gb/s SATA II interfaces, a SPI interface, two TWSI interfaces, a crypto accelerator, IDMA/XOR engines, a SPI interface, four UARTs, and depending on the model, two or four gigabit ethernet interfaces. This patch adds basic support for the platform, and allows booting on the MV78x00 development board, with functional UARTs, SATA, PCIe, GigE and USB ports. Signed-off-by: Stanislav Samsonov Signed-off-by: Lennert Buytenhek --- include/asm-arm/arch-mv78xx0/debug-macro.S | 20 +++++ include/asm-arm/arch-mv78xx0/dma.h | 1 + include/asm-arm/arch-mv78xx0/entry-macro.S | 39 +++++++++ include/asm-arm/arch-mv78xx0/hardware.h | 21 +++++ include/asm-arm/arch-mv78xx0/io.h | 26 ++++++ include/asm-arm/arch-mv78xx0/irqs.h | 91 +++++++++++++++++++++ include/asm-arm/arch-mv78xx0/memory.h | 14 ++++ include/asm-arm/arch-mv78xx0/mv78xx0.h | 126 +++++++++++++++++++++++++++++ include/asm-arm/arch-mv78xx0/system.h | 37 +++++++++ include/asm-arm/arch-mv78xx0/timex.h | 9 +++ include/asm-arm/arch-mv78xx0/uncompress.h | 47 +++++++++++ include/asm-arm/arch-mv78xx0/vmalloc.h | 5 ++ 12 files changed, 436 insertions(+) create mode 100644 include/asm-arm/arch-mv78xx0/debug-macro.S create mode 100644 include/asm-arm/arch-mv78xx0/dma.h create mode 100644 include/asm-arm/arch-mv78xx0/entry-macro.S create mode 100644 include/asm-arm/arch-mv78xx0/hardware.h create mode 100644 include/asm-arm/arch-mv78xx0/io.h create mode 100644 include/asm-arm/arch-mv78xx0/irqs.h create mode 100644 include/asm-arm/arch-mv78xx0/memory.h create mode 100644 include/asm-arm/arch-mv78xx0/mv78xx0.h create mode 100644 include/asm-arm/arch-mv78xx0/system.h create mode 100644 include/asm-arm/arch-mv78xx0/timex.h create mode 100644 include/asm-arm/arch-mv78xx0/uncompress.h create mode 100644 include/asm-arm/arch-mv78xx0/vmalloc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S new file mode 100644 index 00000000000..d0595bd645e --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/debug-macro.S @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-mv78xx0/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =MV78XX0_REGS_PHYS_BASE + ldrne \rx, =MV78XX0_REGS_VIRT_BASE + orr \rx, \rx, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/dma.h @@ -0,0 +1 @@ +/* empty */ diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S new file mode 100644 index 00000000000..e9a606b1266 --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/entry-macro.S @@ -0,0 +1,39 @@ +/* + * include/asm-arm/arch-mv78xx0/entry-macro.S + * + * Low-level IRQ helper macros for Marvell MV78xx0 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IRQ_VIRT_BASE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ check low interrupts + ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] + ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] + mov \irqnr, #31 + ands \irqstat, \irqstat, \tmp + + @ if no low interrupts set, check high interrupts + ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] + ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF] + moveq \irqnr, #63 + andeqs \irqstat, \irqstat, \tmp + + @ find first active interrupt source + clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h new file mode 100644 index 00000000000..8e17926086c --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/hardware.h @@ -0,0 +1,21 @@ +/* + * include/asm-arm/arch-mv78xx0/hardware.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include "mv78xx0.h" + +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */ + + +#endif diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h new file mode 100644 index 00000000000..415d4c98e3d --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/io.h @@ -0,0 +1,26 @@ +/* + * include/asm-arm/arch-mv78xx0/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "mv78xx0.h" + +#define IO_SPACE_LIMIT 0xffffffff + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0)) + + MV78XX0_PCIE_IO_VIRT_BASE(0)); +} + +#define __io(a) __io(a) +#define __mem_pci(a) (a) + + +#endif diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h new file mode 100644 index 00000000000..75930450cd6 --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/irqs.h @@ -0,0 +1,91 @@ +/* + * include/asm-arm/arch-mv78xx0/irqs.h + * + * IRQ definitions for Marvell MV78xx0 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include "mv78xx0.h" /* need GPIO_MAX */ + +/* + * MV78xx0 Low Interrupt Controller + */ +#define IRQ_MV78XX0_ERR 0 +#define IRQ_MV78XX0_SPI 1 +#define IRQ_MV78XX0_I2C_0 2 +#define IRQ_MV78XX0_I2C_1 3 +#define IRQ_MV78XX0_IDMA_0 4 +#define IRQ_MV78XX0_IDMA_1 5 +#define IRQ_MV78XX0_IDMA_2 6 +#define IRQ_MV78XX0_IDMA_3 7 +#define IRQ_MV78XX0_TIMER_0 8 +#define IRQ_MV78XX0_TIMER_1 9 +#define IRQ_MV78XX0_TIMER_2 10 +#define IRQ_MV78XX0_TIMER_3 11 +#define IRQ_MV78XX0_UART_0 12 +#define IRQ_MV78XX0_UART_1 13 +#define IRQ_MV78XX0_UART_2 14 +#define IRQ_MV78XX0_UART_3 15 +#define IRQ_MV78XX0_USB_0 16 +#define IRQ_MV78XX0_USB_1 17 +#define IRQ_MV78XX0_USB_2 18 +#define IRQ_MV78XX0_CRYPTO 19 +#define IRQ_MV78XX0_SDIO_0 20 +#define IRQ_MV78XX0_SDIO_1 21 +#define IRQ_MV78XX0_XOR_0 22 +#define IRQ_MV78XX0_XOR_1 23 +#define IRQ_MV78XX0_I2S_0 24 +#define IRQ_MV78XX0_I2S_1 25 +#define IRQ_MV78XX0_SATA 26 +#define IRQ_MV78XX0_TDMI 27 + +/* + * MV78xx0 High Interrupt Controller + */ +#define IRQ_MV78XX0_PCIE_00 32 +#define IRQ_MV78XX0_PCIE_01 33 +#define IRQ_MV78XX0_PCIE_02 34 +#define IRQ_MV78XX0_PCIE_03 35 +#define IRQ_MV78XX0_PCIE_10 36 +#define IRQ_MV78XX0_PCIE_11 37 +#define IRQ_MV78XX0_PCIE_12 38 +#define IRQ_MV78XX0_PCIE_13 39 +#define IRQ_MV78XX0_GE00_SUM 40 +#define IRQ_MV78XX0_GE00_RX 41 +#define IRQ_MV78XX0_GE00_TX 42 +#define IRQ_MV78XX0_GE00_MISC 43 +#define IRQ_MV78XX0_GE01_SUM 44 +#define IRQ_MV78XX0_GE01_RX 45 +#define IRQ_MV78XX0_GE01_TX 46 +#define IRQ_MV78XX0_GE01_MISC 47 +#define IRQ_MV78XX0_GE10_SUM 48 +#define IRQ_MV78XX0_GE10_RX 49 +#define IRQ_MV78XX0_GE10_TX 50 +#define IRQ_MV78XX0_GE10_MISC 51 +#define IRQ_MV78XX0_GE11_SUM 52 +#define IRQ_MV78XX0_GE11_RX 53 +#define IRQ_MV78XX0_GE11_TX 54 +#define IRQ_MV78XX0_GE11_MISC 55 +#define IRQ_MV78XX0_GPIO_0_7 56 +#define IRQ_MV78XX0_GPIO_8_15 57 +#define IRQ_MV78XX0_GPIO_16_23 58 +#define IRQ_MV78XX0_GPIO_24_31 59 +#define IRQ_MV78XX0_DB_IN 60 +#define IRQ_MV78XX0_DB_OUT 61 + +/* + * MV78XX0 General Purpose Pins + */ +#define IRQ_MV78XX0_GPIO_START 64 +#define NR_GPIO_IRQS GPIO_MAX + +#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) + + +#endif diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h new file mode 100644 index 00000000000..721a6b185b9 --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/memory.h @@ -0,0 +1,14 @@ +/* + * include/asm-arm/arch-mv78xx0/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + + +#endif diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h new file mode 100644 index 00000000000..9f5d83c73fa --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/mv78xx0.h @@ -0,0 +1,126 @@ +/* + * include/asm-arm/arch-mv78xx0/mv78xx0.h + * + * Generic definitions for Marvell MV78xx0 SoC flavors: + * MV781x0 and MV782x0. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_MV78XX0_H +#define __ASM_ARCH_MV78XX0_H + +/* + * Marvell MV78xx0 address maps. + * + * phys + * c0000000 PCIe Memory space + * f0800000 PCIe #0 I/O space + * f0900000 PCIe #1 I/O space + * f0a00000 PCIe #2 I/O space + * f0b00000 PCIe #3 I/O space + * f0c00000 PCIe #4 I/O space + * f0d00000 PCIe #5 I/O space + * f0e00000 PCIe #6 I/O space + * f0f00000 PCIe #7 I/O space + * f1000000 on-chip peripheral registers + * + * virt phys size + * fe400000 f102x000 16K core-specific peripheral registers + * fe700000 f0800000 1M PCIe #0 I/O space + * fe800000 f0900000 1M PCIe #1 I/O space + * fe900000 f0a00000 1M PCIe #2 I/O space + * fea00000 f0b00000 1M PCIe #3 I/O space + * feb00000 f0c00000 1M PCIe #4 I/O space + * fec00000 f0d00000 1M PCIe #5 I/O space + * fed00000 f0e00000 1M PCIe #6 I/O space + * fee00000 f0f00000 1M PCIe #7 I/O space + * fef00000 f1000000 1M on-chip peripheral registers + */ +#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 +#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 +#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_SIZE SZ_16K + +#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) +#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20)) +#define MV78XX0_PCIE_IO_SIZE SZ_1M + +#define MV78XX0_REGS_PHYS_BASE 0xf1000000 +#define MV78XX0_REGS_VIRT_BASE 0xfef00000 +#define MV78XX0_REGS_SIZE SZ_1M + +#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 +#define MV78XX0_PCIE_MEM_SIZE 0x30000000 + +/* + * Core-specific peripheral registers. + */ +#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define L2_WRITETHROUGH 0x00020000 +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0008 +#define IRQ_MASK_LOW_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +/* + * Register Map + */ +#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) +#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500) +#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700) + +#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000) +#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) +#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) +#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) +#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200) +#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200) +#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300) +#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300) + +#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000) +#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000) + +#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000) +#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000) +#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000) +#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000) + +#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000) +#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000) +#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000) + +#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000) +#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000) + +#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000) +#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000) +#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000) +#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000) + +#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) + + +#define GPIO_MAX 32 + + +#endif diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h new file mode 100644 index 00000000000..7eb47d376db --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/system.h @@ -0,0 +1,37 @@ +/* + * include/asm-arm/arch-mv78xx0/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} + + +#endif diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h new file mode 100644 index 00000000000..a854b1ccbd0 --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/timex.h @@ -0,0 +1,9 @@ +/* + * include/asm-arm/arch-mv78xx0/timex.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h new file mode 100644 index 00000000000..3bfe0a293ef --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/uncompress.h @@ -0,0 +1,47 @@ +/* + * include/asm-arm/arch-mv78xx0/uncompress.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + +#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) + +static void putc(const char c) +{ + unsigned char *base = SERIAL_BASE; + int i; + + for (i = 0; i < 0x1000; i++) { + if (base[UART_LSR << 2] & UART_LSR_THRE) + break; + barrier(); + } + + base[UART_TX << 2] = c; +} + +static void flush(void) +{ + unsigned char *base = SERIAL_BASE; + unsigned char mask; + int i; + + mask = UART_LSR_TEMT | UART_LSR_THRE; + + for (i = 0; i < 0x1000; i++) { + if ((base[UART_LSR << 2] & mask) == mask) + break; + barrier(); + } +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h new file mode 100644 index 00000000000..f2c51219757 --- /dev/null +++ b/include/asm-arm/arch-mv78xx0/vmalloc.h @@ -0,0 +1,5 @@ +/* + * include/asm-arm/arch-mv78xx0/vmalloc.h + */ + +#define VMALLOC_END 0xfe000000 -- cgit v1.2.3 From 395a59d0f8e86bb39cd700c3d185d30c670bb958 Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sat, 21 Jun 2008 23:47:27 +0530 Subject: ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar Cc: davem@davemloft.net Cc: Steven Rostedt Signed-off-by: Ingo Molnar --- include/asm-arm/ftrace.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 include/asm-arm/ftrace.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/ftrace.h b/include/asm-arm/ftrace.h new file mode 100644 index 00000000000..584ef9a8e5a --- /dev/null +++ b/include/asm-arm/ftrace.h @@ -0,0 +1,14 @@ +#ifndef _ASM_ARM_FTRACE +#define _ASM_ARM_FTRACE + +#ifdef CONFIG_FTRACE +#define MCOUNT_ADDR ((long)(mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void mcount(void); +#endif + +#endif + +#endif /* _ASM_ARM_FTRACE */ -- cgit v1.2.3 From f6dd9fa5a75a3dae16c6843e74e56bf75be51c7c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 10 Jun 2008 20:48:30 +0200 Subject: arm: convert to generic helpers for IPI function calls This converts arm to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Fixups and testing done by Catalin Marinas Cc: Russell King Signed-off-by: Jens Axboe --- include/asm-arm/smp.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h index af99636db40..7fffa2404b8 100644 --- a/include/asm-arm/smp.h +++ b/include/asm-arm/smp.h @@ -101,6 +101,9 @@ extern void platform_cpu_die(unsigned int cpu); extern int platform_cpu_kill(unsigned int cpu); extern void platform_cpu_enable(unsigned int cpu); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + /* * Local timer interrupt handling function (can be IPI'ed). */ -- cgit v1.2.3 From 1338760329c586e0141831099e15f5c336dd9c1d Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Mon, 23 Jun 2008 01:05:08 -1100 Subject: [ARM] Kirkwood: support L2 writeback mode This patch allows booting Kirkwood with the L2 in writeback mode, by reading the WT override bit from the L2 config register and passing that into the Feroceon L2 init routine, instead of assuming that the WT override bit will always be set Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek --- include/asm-arm/arch-kirkwood/kirkwood.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h index 520250dbd8a..bb31b315c35 100644 --- a/include/asm-arm/arch-kirkwood/kirkwood.h +++ b/include/asm-arm/arch-kirkwood/kirkwood.h @@ -49,7 +49,6 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) #define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) #define CPU_RESET 0x00000002 -//#define L2_WRITETHROUGH 0x00020000 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) @@ -65,6 +64,8 @@ #define IRQ_CAUSE_HIGH_OFF 0x0010 #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_WRITETHROUGH 0x00000010 /* * Register Map -- cgit v1.2.3 From f4db56ffd43a810424866fac6de9a32486415316 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 4 May 2008 19:25:52 -1100 Subject: [MTD] orion_nand: add chip_delay parameter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some SoCs need a different chip_delay value. Signed-off-by: Saeed Bishara Acked-by: Jörn Engel Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- include/asm-arm/plat-orion/orion_nand.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-orion/orion_nand.h b/include/asm-arm/plat-orion/orion_nand.h index ffd3852a0dd..ad4ce94c199 100644 --- a/include/asm-arm/plat-orion/orion_nand.h +++ b/include/asm-arm/plat-orion/orion_nand.h @@ -18,6 +18,7 @@ struct orion_nand_data { u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 width; /* buswidth */ + u8 chip_delay; }; -- cgit v1.2.3 From 3fddd09e59cf49dc339e2de74d31a76c1f7f172f Mon Sep 17 00:00:00 2001 From: Richard Woodruff Date: Thu, 3 Jul 2008 12:24:30 +0300 Subject: ARM: OMAP: DMTimer: Optimize by adding load and start This patch optimizes the timer load and start sequence. By combining the load and start a needless posted wait can be removed from the system timer execution path. * Before patch register writes are taking up .078% @ 500MHz during idle. Address |total |min |max |avr |count|ratio% old\process\default_idle|7.369s |0.0us|999.902ms|14.477ms|509. |62.661% ld\Global\cpu_v7_do_idle|4.265s |0.0us|375.786ms|24.374ms|175. |36.270% (UNKNOWN)|17.503ms|0.us|531.080us|5.119us|3419. |0.148% r\omap_dm_timer_set_load|8.135ms|0.0us|79.887us|15.065us|540. |0.069% <-- \vmlinux-old\Global\_end|2.023ms|0.0us|4.000us|0.560us|3613. |0.017% -old\Global\__raw_readsw|1.962ms|0.0us|108.610us|9.167us|214. |0.016% old\smc91x\smc_interrupt|1.353ms|0.0us|10.212us|2.348us|576. |0.011% s/namei\__link_path_walk|1.161ms|0.0us|4.310us|0.762us| 1524. |0.009% \omap_dm_timer_write_reg|1.085ms|0.0us|126.150us|2.153us|504. |0.009% <-- * After patch timer functions do not show up in top listings for long captures. Signed-off-by: Richard Woodruff Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/dmtimer.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h index fefb276ed40..02b29e8437a 100644 --- a/include/asm-arm/arch-omap/dmtimer.h +++ b/include/asm-arm/arch-omap/dmtimer.h @@ -66,6 +66,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer); void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); +void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); -- cgit v1.2.3 From 4a79acdc784c315d9c436ba2315d08f8f53b8adf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 3 Jul 2008 12:24:31 +0300 Subject: ARM: OMAP: Add OMAP3430 base defines Add symbolic constants for OMAP3430 base addresses; include that file in hardware.h. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/hardware.h | 1 + include/asm-arm/arch-omap/omap34xx.h | 72 ++++++++++++++++++++++++++++++++++++ 2 files changed, 73 insertions(+) create mode 100644 include/asm-arm/arch-omap/omap34xx.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index 91d85b3417b..45fdfccbd5d 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -284,6 +284,7 @@ #include "omap1510.h" #include "omap24xx.h" #include "omap16xx.h" +#include "omap34xx.h" #ifndef __ASSEMBLER__ diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h new file mode 100644 index 00000000000..aa30c6d10ab --- /dev/null +++ b/include/asm-arm/arch-omap/omap34xx.h @@ -0,0 +1,72 @@ +/* + * include/asm-arm/arch-omap/omap34xx.h + * + * This file contains the processor specific definitions of the TI OMAP34XX. + * + * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_OMAP34XX_H +#define __ASM_ARCH_OMAP34XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ + +#define L4_34XX_BASE 0x48000000 +#define L4_WK_34XX_BASE 0x48300000 +#define L4_WK_OMAP_BASE L4_WK_34XX_BASE +#define L4_PER_34XX_BASE 0x49000000 +#define L4_PER_OMAP_BASE L4_PER_34XX_BASE +#define L4_EMU_34XX_BASE 0x54000000 +#define L4_EMU_BASE L4_EMU_34XX_BASE +#define L3_34XX_BASE 0x68000000 +#define L3_OMAP_BASE L3_34XX_BASE + +#define OMAP3430_32KSYNCT_BASE 0x48320000 +#define OMAP3430_CM_BASE 0x48004800 +#define OMAP3430_PRM_BASE 0x48306800 +#define OMAP343X_SMS_BASE 0x6C000000 +#define OMAP343X_SDRC_BASE 0x6D000000 +#define OMAP34XX_GPMC_BASE 0x6E000000 +#define OMAP343X_SCM_BASE 0x48002000 +#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE + +#define OMAP34XX_IC_BASE 0x48200000 +#define OMAP34XX_IVA_INTC_BASE 0x40000000 +#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) +#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) +#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) + + +#if defined(CONFIG_ARCH_OMAP3430) + +#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE +#define OMAP2_CM_BASE OMAP3430_CM_BASE +#define OMAP2_PRM_BASE OMAP3430_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) + +#endif + +#define OMAP34XX_DSP_BASE 0x58000000 +#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) +#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) +#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000) +#endif /* __ASM_ARCH_OMAP34XX_H */ + -- cgit v1.2.3 From 4d96372e6daae89166fed7883ee092dc8db80b21 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:31 +0300 Subject: ARM: OMAP: DMA: Make channels dynamic for multi-boot Make DMA channels dynamic for multi-boot Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/dma.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index 24acf090030..46fe5a40a25 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -68,9 +68,10 @@ #define OMAP_DMA4_CAPS_3 (OMAP_DMA4_BASE + 0x70) #define OMAP_DMA4_CAPS_4 (OMAP_DMA4_BASE + 0x74) -#ifdef CONFIG_ARCH_OMAP1 +#define OMAP1_LOGICAL_DMA_CH_COUNT 17 +#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ -#define OMAP_LOGICAL_DMA_CH_COUNT 17 +#ifdef CONFIG_ARCH_OMAP1 /* Common channel specific registers for omap1 */ #define OMAP_DMA_CSDP_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00) @@ -89,8 +90,6 @@ #else -#define OMAP_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ - /* Common channel specific registers for omap2 */ #define OMAP_DMA_CCR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x80) #define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x84) -- cgit v1.2.3 From 0499bdeb1dec30325aa282a83f9374fa849aa01c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:36 +0300 Subject: ARM: OMAP: DMA: Remove __REG access Remove __REG access in DMA code, use dma_read/write instead: - dynamically set the omap_dma_base based on the omap type - omap_read/write becomes dma_read/write - dma channel registers are read with dma_ch_read/write Cc: David Brownell Cc: linux-usb@vger.kernel.org Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/dma.h | 210 +++++++++++++++++++++++----------------- 1 file changed, 120 insertions(+), 90 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index 46fe5a40a25..d188100f8f4 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -22,107 +22,128 @@ #define __ASM_ARCH_DMA_H /* Hardware registers for omap1 */ -#define OMAP_DMA_BASE (0xfffed800) -#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400) -#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404) -#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408) -#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442) -#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444) -#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446) -#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448) -#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a) -#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c) -#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e) -#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450) -#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452) -#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454) -#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456) -#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458) -#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a) -#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460) -#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480) -#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482) -#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0) - -/* Hardware registers for omap2 */ -#if defined(CONFIG_ARCH_OMAP3) -#define OMAP_DMA4_BASE (L4_34XX_BASE + 0x56000) -#else /* CONFIG_ARCH_OMAP2 */ -#define OMAP_DMA4_BASE (L4_24XX_BASE + 0x56000) -#endif - -#define OMAP_DMA4_REVISION (OMAP_DMA4_BASE + 0x00) -#define OMAP_DMA4_GCR_REG (OMAP_DMA4_BASE + 0x78) -#define OMAP_DMA4_IRQSTATUS_L0 (OMAP_DMA4_BASE + 0x08) -#define OMAP_DMA4_IRQSTATUS_L1 (OMAP_DMA4_BASE + 0x0c) -#define OMAP_DMA4_IRQSTATUS_L2 (OMAP_DMA4_BASE + 0x10) -#define OMAP_DMA4_IRQSTATUS_L3 (OMAP_DMA4_BASE + 0x14) -#define OMAP_DMA4_IRQENABLE_L0 (OMAP_DMA4_BASE + 0x18) -#define OMAP_DMA4_IRQENABLE_L1 (OMAP_DMA4_BASE + 0x1c) -#define OMAP_DMA4_IRQENABLE_L2 (OMAP_DMA4_BASE + 0x20) -#define OMAP_DMA4_IRQENABLE_L3 (OMAP_DMA4_BASE + 0x24) -#define OMAP_DMA4_SYSSTATUS (OMAP_DMA4_BASE + 0x28) -#define OMAP_DMA4_OCP_SYSCONFIG (OMAP_DMA4_BASE + 0x2c) -#define OMAP_DMA4_CAPS_0 (OMAP_DMA4_BASE + 0x64) -#define OMAP_DMA4_CAPS_2 (OMAP_DMA4_BASE + 0x6c) -#define OMAP_DMA4_CAPS_3 (OMAP_DMA4_BASE + 0x70) -#define OMAP_DMA4_CAPS_4 (OMAP_DMA4_BASE + 0x74) +#define OMAP1_DMA_BASE (0xfffed800) + +#define OMAP1_DMA_GCR 0x400 +#define OMAP1_DMA_GSCR 0x404 +#define OMAP1_DMA_GRST 0x408 +#define OMAP1_DMA_HW_ID 0x442 +#define OMAP1_DMA_PCH2_ID 0x444 +#define OMAP1_DMA_PCH0_ID 0x446 +#define OMAP1_DMA_PCH1_ID 0x448 +#define OMAP1_DMA_PCHG_ID 0x44a +#define OMAP1_DMA_PCHD_ID 0x44c +#define OMAP1_DMA_CAPS_0_U 0x44e +#define OMAP1_DMA_CAPS_0_L 0x450 +#define OMAP1_DMA_CAPS_1_U 0x452 +#define OMAP1_DMA_CAPS_1_L 0x454 +#define OMAP1_DMA_CAPS_2 0x456 +#define OMAP1_DMA_CAPS_3 0x458 +#define OMAP1_DMA_CAPS_4 0x45a +#define OMAP1_DMA_PCH2_SR 0x460 +#define OMAP1_DMA_PCH0_SR 0x480 +#define OMAP1_DMA_PCH1_SR 0x482 +#define OMAP1_DMA_PCHD_SR 0x4c0 + +/* Hardware registers for omap2 and omap3 */ +#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) +#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) + +#define OMAP_DMA4_REVISION 0x00 +#define OMAP_DMA4_GCR 0x78 +#define OMAP_DMA4_IRQSTATUS_L0 0x08 +#define OMAP_DMA4_IRQSTATUS_L1 0x0c +#define OMAP_DMA4_IRQSTATUS_L2 0x10 +#define OMAP_DMA4_IRQSTATUS_L3 0x14 +#define OMAP_DMA4_IRQENABLE_L0 0x18 +#define OMAP_DMA4_IRQENABLE_L1 0x1c +#define OMAP_DMA4_IRQENABLE_L2 0x20 +#define OMAP_DMA4_IRQENABLE_L3 0x24 +#define OMAP_DMA4_SYSSTATUS 0x28 +#define OMAP_DMA4_OCP_SYSCONFIG 0x2c +#define OMAP_DMA4_CAPS_0 0x64 +#define OMAP_DMA4_CAPS_2 0x6c +#define OMAP_DMA4_CAPS_3 0x70 +#define OMAP_DMA4_CAPS_4 0x74 #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ -#ifdef CONFIG_ARCH_OMAP1 - /* Common channel specific registers for omap1 */ -#define OMAP_DMA_CSDP_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00) -#define OMAP_DMA_CCR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x02) -#define OMAP_DMA_CICR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x04) -#define OMAP_DMA_CSR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x06) -#define OMAP_DMA_CEN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x10) -#define OMAP_DMA_CFN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x12) -#define OMAP_DMA_CSFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x14) -#define OMAP_DMA_CSEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x16) -#define OMAP_DMA_CSAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x18) -#define OMAP_DMA_CDAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1a) -#define OMAP_DMA_CDEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1c) -#define OMAP_DMA_CDFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1e) -#define OMAP_DMA_CLNK_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x28) - -#else +#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00) +#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00) +#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02) +#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04) +#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06) +#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10) +#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12) +#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14) +#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16) +#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */ +#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18) +#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a) +#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c) +#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e) +#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28) /* Common channel specific registers for omap2 */ -#define OMAP_DMA_CCR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x80) -#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x84) -#define OMAP_DMA_CICR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x88) -#define OMAP_DMA_CSR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x8c) -#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x90) -#define OMAP_DMA_CEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x94) -#define OMAP_DMA_CFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x98) -#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa4) -#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa8) -#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xac) -#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb0) -#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb4) -#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb8) - -#endif +#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80) +#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80) +#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84) +#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88) +#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c) +#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90) +#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94) +#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98) +#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4) +#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8) +#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac) +#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0) +#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4) +#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8) /* Channel specific registers only on omap1 */ -#define OMAP1_DMA_CSSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x08) -#define OMAP1_DMA_CSSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0a) -#define OMAP1_DMA_CDSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0c) -#define OMAP1_DMA_CDSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0e) -#define OMAP1_DMA_COLOR_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x20) -#define OMAP1_DMA_CCR2_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x24) -#define OMAP1_DMA_COLOR_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x22) -#define OMAP1_DMA_LCH_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a) +#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08) +#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a) +#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c) +#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e) +#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20) +#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22) +#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24) +#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */ +#define OMAP1_DMA_CCEN(n) 0 +#define OMAP1_DMA_CCFN(n) 0 /* Channel specific registers only on omap2 */ -#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x9c) -#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa0) -#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xbc) -#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc0) -#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc4) +#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c) +#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0) +#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc) +#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0) +#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4) + +/* Dummy defines to keep multi-omap compiles happy */ +#define OMAP1_DMA_REVISION 0 +#define OMAP1_DMA_IRQSTATUS_L0 0 +#define OMAP1_DMA_IRQENABLE_L0 0 +#define OMAP1_DMA_OCP_SYSCONFIG 0 +#define OMAP_DMA4_HW_ID 0 +#define OMAP_DMA4_CAPS_0_L 0 +#define OMAP_DMA4_CAPS_0_U 0 +#define OMAP_DMA4_CAPS_1_L 0 +#define OMAP_DMA4_CAPS_1_U 0 +#define OMAP_DMA4_GSCR 0 +#define OMAP_DMA4_CPC(n) 0 + +#define OMAP_DMA4_LCH_CTRL(n) 0 +#define OMAP_DMA4_COLOR_L(n) 0 +#define OMAP_DMA4_COLOR_U(n) 0 +#define OMAP_DMA4_CCR2(n) 0 +#define OMAP1_DMA_CSSA(n) 0 +#define OMAP1_DMA_CDSA(n) 0 +#define OMAP_DMA4_CSSA_L(n) 0 +#define OMAP_DMA4_CSSA_U(n) 0 +#define OMAP_DMA4_CDSA_L(n) 0 +#define OMAP_DMA4_CDSA_U(n) 0 /*----------------------------------------------------------------------------*/ @@ -369,6 +390,13 @@ enum omap_dma_write_mode { OMAP_DMA_WRITE_LAST_NON_POSTED }; +enum omap_dma_channel_mode { + OMAP_DMA_LCH_2D = 0, + OMAP_DMA_LCH_G, + OMAP_DMA_LCH_P, + OMAP_DMA_LCH_PD +}; + struct omap_dma_channel_params { int data_type; /* data type 8,16,32 */ int elem_count; /* number of elements in a frame */ @@ -417,6 +445,7 @@ extern void omap_set_dma_transfer_params(int lch, int data_type, extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color); extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); +extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, unsigned long src_start, @@ -447,6 +476,7 @@ extern dma_addr_t omap_get_dma_src_pos(int lch); extern dma_addr_t omap_get_dma_dst_pos(int lch); extern int omap_get_dma_src_addr_counter(int lch); extern void omap_clear_dma(int lch); +extern int omap_get_dma_active_status(int lch); extern int omap_dma_running(void); extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams); -- cgit v1.2.3 From 97b7f715589fb997e430c6aa824abbd9fd5ed42d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:37 +0300 Subject: ARM: OMAP: DMA: Clean-up code DMA clean-up, mostly checkpatch.pl fixes. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/dma.h | 161 +++++++++++++++++++++++++--------------- 1 file changed, 103 insertions(+), 58 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index d188100f8f4..f4dcb958786 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -216,63 +216,98 @@ #define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ #define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ #define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP24XX_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ #define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ #define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ #define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ #define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ #define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ #define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP24XX_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP24XX_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ +#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ +#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ +#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ +#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ +#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ +#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ #define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ #define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ #define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ #define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* SDMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* SDMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* SDMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* SDMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* SDMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* SDMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* SDMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* SDMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* SDMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* SDMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* SDMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* SDMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* SDMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* SDMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* SDMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* SDMA_45 */ - -#define OMAP24XX_DMA_UART1_TX 49 /* SDMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* SDMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* SDMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* SDMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* SDMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* SDMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* SDMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* SDMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* SDMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* SDMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* SDMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* SDMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* SDMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* SDMA_61 */ -#define OMAP24XX_DMA_MS 63 /* SDMA_62 */ -#define OMAP24XX_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ +#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ +#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ +#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ +#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ +#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ +#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ +#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ +#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ +#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ +#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ /*----------------------------------------------------------------------------*/ @@ -378,6 +413,11 @@ enum omap_dma_burst_mode { OMAP_DMA_DATA_BURST_16, }; +enum end_type { + OMAP_DMA_LITTLE_ENDIAN = 0, + OMAP_DMA_BIG_ENDIAN +}; + enum omap_dma_color_mode { OMAP_DMA_COLOR_DIS = 0, OMAP_DMA_CONSTANT_FILL, @@ -403,18 +443,21 @@ struct omap_dma_channel_params { int frame_count; /* number of frames in a element */ int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int src_amode; /* constant , post increment, indexed , double indexed */ + int src_amode; /* constant, post increment, indexed, + double indexed */ unsigned long src_start; /* source address : physical */ int src_ei; /* source element index */ int src_fi; /* source frame index */ int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int dst_amode; /* constant , post increment, indexed , double indexed */ + int dst_amode; /* constant, post increment, indexed, + double indexed */ unsigned long dst_start; /* source address : physical */ int dst_ei; /* source element index */ int dst_fi; /* source frame index */ - int trigger; /* trigger attached if the channel is synchronized */ + int trigger; /* trigger attached if the channel is + synchronized */ int sync_mode; /* sycn on element, frame , block or packet */ int src_or_dst_synch; /* source synch(1) or destination synch(0) */ @@ -431,8 +474,8 @@ struct omap_dma_channel_params { extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, - void (* callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch); + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); extern void omap_enable_dma_irq(int ch, u16 irq_bits); extern void omap_disable_dma_irq(int ch, u16 irq_bits); extern void omap_free_dma(int ch); @@ -464,17 +507,16 @@ extern void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode); extern void omap_set_dma_params(int lch, - struct omap_dma_channel_params * params); + struct omap_dma_channel_params *params); -extern void omap_dma_link_lch (int lch_head, int lch_queue); -extern void omap_dma_unlink_lch (int lch_head, int lch_queue); +extern void omap_dma_link_lch(int lch_head, int lch_queue); +extern void omap_dma_unlink_lch(int lch_head, int lch_queue); extern int omap_set_dma_callback(int lch, - void (* callback)(int lch, u16 ch_status, void *data), + void (*callback)(int lch, u16 ch_status, void *data), void *data); extern dma_addr_t omap_get_dma_src_pos(int lch); extern dma_addr_t omap_get_dma_dst_pos(int lch); -extern int omap_get_dma_src_addr_counter(int lch); extern void omap_clear_dma(int lch); extern int omap_get_dma_active_status(int lch); extern int omap_dma_running(void); @@ -482,6 +524,9 @@ extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams); extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, unsigned char write_prio); +extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); +extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); +extern int omap_get_dma_index(int lch, int *ei, int *fi); /* Chaining APIs */ #ifndef CONFIG_ARCH_OMAP1 @@ -507,7 +552,7 @@ extern int omap_dma_chain_status(int chain_id); #endif /* LCD DMA functions */ -extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data), +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), void *data); extern void omap_free_lcd_dma(void); extern void omap_setup_lcd_dma(void); -- cgit v1.2.3 From c2d43e39c7c303db53facd0bea44b66f263e3f35 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:38 +0300 Subject: ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S Split sram24xx.S into sram242x.S and sram243x.S Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/sram.h | 37 ++++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h index bb9bb3fd532..be59f4a9828 100644 --- a/include/asm-arm/arch-omap/sram.h +++ b/include/asm-arm/arch-omap/sram.h @@ -11,6 +11,7 @@ #ifndef __ARCH_ARM_OMAP_SRAM_H #define __ARCH_ARM_OMAP_SRAM_H +extern int __init omap_sram_init(void); extern void * omap_sram_push(void * start, unsigned long size); extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); @@ -21,17 +22,35 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); /* Do not use these */ -extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long sram_reprogram_clock_sz; +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; -extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long sram_ddr_init_sz; +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; -extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern unsigned long sram_set_prcm_sz; +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; -extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); -extern unsigned long sram_reprogram_sdrc_sz; +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; #endif -- cgit v1.2.3 From bc5d0c89c88df67f92d5d5882c27437379e9e8af Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 3 Jul 2008 12:24:39 +0300 Subject: ARM: OMAP: McBSP: Prepare for splitting into omap1 and omap2 code This patch transform mcbsp code to use platform data from arch/arm/plat-omap/devices.c It also gets ride of ifdefs on mcbsp.c code. To do it, a platform data structure was defined. Signed-off-by: Eduardo Valentin Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/mcbsp.h | 62 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 60 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h index c7a0cc1c4e9..26c78f67dc8 100644 --- a/include/asm-arm/arch-omap/mcbsp.h +++ b/include/asm-arm/arch-omap/mcbsp.h @@ -24,7 +24,11 @@ #ifndef __ASM_ARCH_OMAP_MCBSP_H #define __ASM_ARCH_OMAP_MCBSP_H +#include +#include + #include +#include #define OMAP730_MCBSP1_BASE 0xfffb1000 #define OMAP730_MCBSP2_BASE 0xfffb1800 @@ -40,6 +44,9 @@ #define OMAP24XX_MCBSP1_BASE 0x48074000 #define OMAP24XX_MCBSP2_BASE 0x48076000 +#define OMAP34XX_MCBSP1_BASE 0x48074000 +#define OMAP34XX_MCBSP2_BASE 0x49022000 + #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) #define OMAP_MCBSP_REG_DRR2 0x00 @@ -74,7 +81,8 @@ #define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERH 0x3C -#define OMAP_MAX_MCBSP_COUNT 3 +#define OMAP_MAX_MCBSP_COUNT 3 +#define MAX_MCBSP_CLOCKS 3 #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) @@ -117,7 +125,8 @@ #define OMAP_MCBSP_REG_XCERG 0x74 #define OMAP_MCBSP_REG_XCERH 0x78 -#define OMAP_MAX_MCBSP_COUNT 2 +#define OMAP_MAX_MCBSP_COUNT 2 +#define MAX_MCBSP_CLOCKS 2 #define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) @@ -298,6 +307,55 @@ struct omap_mcbsp_spi_cfg { omap_mcbsp_word_length word_length; }; +/* Platform specific configuration */ +struct omap_mcbsp_ops { + void (*request)(unsigned int); + void (*free)(unsigned int); + int (*check)(unsigned int); +}; + +struct omap_mcbsp_platform_data { + u32 virt_base; + u8 dma_rx_sync, dma_tx_sync; + u16 rx_irq, tx_irq; + struct omap_mcbsp_ops *ops; + char const *clk_name; +}; + +struct omap_mcbsp { + struct device *dev; + u32 io_base; + u8 id; + u8 free; + omap_mcbsp_word_length rx_word_length; + omap_mcbsp_word_length tx_word_length; + + omap_mcbsp_io_type_t io_type; /* IRQ or poll */ + /* IRQ based TX/RX */ + int rx_irq; + int tx_irq; + + /* DMA stuff */ + u8 dma_rx_sync; + short dma_rx_lch; + u8 dma_tx_sync; + short dma_tx_lch; + + /* Completion queues */ + struct completion tx_irq_completion; + struct completion rx_irq_completion; + struct completion tx_dma_completion; + struct completion rx_dma_completion; + + /* Protect the field .free, while checking if the mcbsp is in use */ + spinlock_t lock; + struct omap_mcbsp_platform_data *pdata; + struct clk *clk; +}; + +int omap_mcbsp_init(void); +void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, + int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); -- cgit v1.2.3 From 44f78f43b349d19d378a996c4a2d9fcdff771b1e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:41 +0300 Subject: ARM: OMAP: Clean up interrupt lines to fix warnings for multi-omap If boards with different NR_IRQS are compiled together, tons of compiler warnings are emitted about redefining NR_IRQS. This patch fixes the problem by adding up NR_IRQS in a common place. Patch also removes quite a bit of now unnecessary code. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/board-2430sdp.h | 5 --- include/asm-arm/arch-omap/board-h3.h | 6 ---- include/asm-arm/arch-omap/board-innovator.h | 3 -- include/asm-arm/arch-omap/board-perseus2.h | 6 ---- include/asm-arm/arch-omap/fpga.h | 49 ++++++++++++++--------------- include/asm-arm/arch-omap/irqs.h | 44 ++++++++++++++++++++------ 6 files changed, 59 insertions(+), 54 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h index e9c65ce3cb1..c7db9004ec3 100644 --- a/include/asm-arm/arch-omap/board-2430sdp.h +++ b/include/asm-arm/arch-omap/board-2430sdp.h @@ -36,9 +36,4 @@ #define TWL4030_IRQNUM INT_24XX_SYS_NIRQ -/* TWL4030 Primary Interrupt Handler (PIH) interrupts */ -#define IH_TWL4030_BASE IH_BOARD_BASE -#define IH_TWL4030_END (IH_TWL4030_BASE+8) -#define NR_IRQS (IH_TWL4030_END) - #endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h index 0f6404435ea..c5d0f32a40a 100644 --- a/include/asm-arm/arch-omap/board-h3.h +++ b/include/asm-arm/arch-omap/board-h3.h @@ -30,12 +30,6 @@ /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ #define OMAP1710_ETHR_START 0x04000300 -#define MAXIRQNUM (IH_BOARD_BASE) -#define MAXFIQNUM MAXIRQNUM -#define MAXSWINUM MAXIRQNUM - -#define NR_IRQS (MAXIRQNUM + 1) - extern void h3_mmc_init(void); extern void h3_mmc_slot_cover_handler(void *arg, int state); diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h index 56d2c98e143..9ca03dec9d3 100644 --- a/include/asm-arm/arch-omap/board-innovator.h +++ b/include/asm-arm/arch-omap/board-innovator.h @@ -36,9 +36,6 @@ #define OMAP1510P1_EMIFS_PRI_VALUE 0x00 #define OMAP1510P1_EMIFF_PRI_VALUE 0x00 -#define NR_FPGA_IRQS 24 -#define NR_IRQS (IH_BOARD_BASE + NR_FPGA_IRQS) - #ifndef __ASSEMBLY__ void fpga_write(unsigned char val, int reg); unsigned char fpga_read(int reg); diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h index eb74420cb43..d7429cb0f72 100644 --- a/include/asm-arm/arch-omap/board-perseus2.h +++ b/include/asm-arm/arch-omap/board-perseus2.h @@ -36,10 +36,4 @@ #define OMAP_SDRAM_DEVICE D256M_1X16_4B #endif -#define MAXIRQNUM IH_BOARD_BASE -#define MAXFIQNUM MAXIRQNUM -#define MAXSWINUM MAXIRQNUM - -#define NR_IRQS (MAXIRQNUM + 1) - #endif diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h index 6a883e0bdbb..f420881d2a3 100644 --- a/include/asm-arm/arch-omap/fpga.h +++ b/include/asm-arm/arch-omap/fpga.h @@ -169,30 +169,29 @@ struct h2p2_dbg_fpga { #define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) /* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_IH_FPGA_BASE IH_BOARD_BASE -#define OMAP1510_INT_FPGA_ATN (OMAP1510_IH_FPGA_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP1510_IH_FPGA_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP1510_IH_FPGA_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP1510_IH_FPGA_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP1510_IH_FPGA_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP1510_IH_FPGA_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP1510_IH_FPGA_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP1510_IH_FPGA_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP1510_IH_FPGA_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP1510_IH_FPGA_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP1510_IH_FPGA_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP1510_IH_FPGA_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP1510_IH_FPGA_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP1510_IH_FPGA_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP1510_IH_FPGA_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP1510_IH_FPGA_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP1510_IH_FPGA_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP1510_IH_FPGA_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP1510_IH_FPGA_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP1510_IH_FPGA_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP1510_IH_FPGA_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP1510_IH_FPGA_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP1510_IH_FPGA_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP1510_IH_FPGA_BASE + 23) +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) #endif diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 87973654e62..7464c694859 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -285,7 +285,41 @@ #define OMAP_MAX_GPIO_LINES 192 #define IH_GPIO_BASE (128 + IH2_BASE) #define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define IH_BOARD_BASE (16 + IH_MPUIO_BASE) +#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) + +/* External FPGA handles interrupts on Innovator boards */ +#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#define OMAP_FPGA_NR_IRQS 24 +#else +#define OMAP_FPGA_NR_IRQS 0 +#endif +#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) + +/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ +#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) +#ifdef CONFIG_TWL4030_CORE +#define TWL4030_BASE_NR_IRQS 8 +#define TWL4030_PWR_NR_IRQS 8 +#else +#define TWL4030_BASE_NR_IRQS 0 +#define TWL4030_PWR_NR_IRQS 0 +#endif +#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) +#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END +#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) + +/* External TWL4030 gpio interrupts are optional */ +#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END +#ifdef CONFIG_TWL4030_GPIO +#define TWL4030_GPIO_NR_IRQS 18 +#else +#define TWL4030_GPIO_NR_IRQS 0 +#endif +#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) + +/* Total number of interrupts depends on the enabled blocks above */ +#define NR_IRQS TWL4030_GPIO_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) @@ -293,14 +327,6 @@ extern void omap_init_irq(void); #endif -/* - * The definition of NR_IRQS is in board-specific header file, which is - * included via hardware.h - */ #include -#ifndef NR_IRQS -#define NR_IRQS IH_BOARD_BASE -#endif - #endif -- cgit v1.2.3 From 137b3ee27ab1b27dba081542476054836978ca45 Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Thu, 3 Jul 2008 12:24:41 +0300 Subject: ARM: OMAP: CLKFW: Initial debugfs support for omap clock framework debugfs can provide the infrastructure to trace the dependencies of clock tree hierarchy quite visibly. This patch enables to keep track of clock tree hierarchy and expose their attributes under each clock directry as below: omap:~# tree -d -L 2 /debug/clock/omap_32k_fck/ /debug/clock/omap_32k_fck/ |-- gpt10_fck |-- gpt11_fck |-- gpt1_fck |-- per_32k_alwon_fck | |-- gpio2_fck | |-- gpio3_fck | |-- gpio4_fck | |-- gpio5_fck | |-- gpio6_fck | `-- wdt3_fck |-- ts_fck `-- wkup_32k_fck |-- gpio1_fck `-- wdt2_fck 14 directories omap:~# tree /debug/clock/omap_32k_fck/gpt10_fck/ /debug/clock/omap_32k_fck/gpt10_fck/ |-- flags |-- rate `-- usecount 0 directories, 3 files Although, compared with David Brownell's small patch, this may look bit overkilling, I expect that this debugfs can deal with other PRCM complexities at the same time. For example, powerdomain dependencies can be expressed by using symbolic links of these clocks if powerdomain supports dubgfs as well. Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/clock.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index 12a5e4de951..8490fbba39d 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -71,6 +71,9 @@ struct clk { __u8 rate_offset; __u8 src_offset; #endif +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif }; struct cpufreq_frequency_table; -- cgit v1.2.3 From 030b15457d8069a6255579a28db196e002cb9c86 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:41 +0300 Subject: ARM: OMAP: Change omap_cf.c and omap_nor.c to use omap_readw/writew instead of __REG Change omap_cf.c and omap_nor.c to use omap_readw/writew instead of __REG. This is needed for multi-omap in the future. Cc: David Brownell Cc: linux-pcmcia@lists.infradead.org Cc: linux-mtd@lists.infradead.org Signed-off-by: Tony Lindren --- include/asm-arm/arch-omap/tc.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h index 8ded218cbea..65a9c82d3bf 100644 --- a/include/asm-arm/arch-omap/tc.h +++ b/include/asm-arm/arch-omap/tc.h @@ -75,16 +75,14 @@ #ifndef __ASSEMBLER__ /* EMIF Slow Interface Configuration Register */ -#define OMAP_EMIFS_CONFIG_REG __REG32(EMIFS_CONFIG) - #define OMAP_EMIFS_CONFIG_FR (1 << 4) #define OMAP_EMIFS_CONFIG_PDE (1 << 3) #define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) #define OMAP_EMIFS_CONFIG_BM (1 << 1) #define OMAP_EMIFS_CONFIG_WP (1 << 0) -#define EMIFS_CCS(n) __REG32(EMIFS_CS0_CONFIG + (4 * (n))) -#define EMIFS_ACS(n) __REG32(EMIFS_ACS0 + (4 * (n))) +#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) +#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -93,13 +91,13 @@ */ static inline u32 omap_cs0_phys(void) { - return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM) + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) ? OMAP_CS3_PHYS : 0; } static inline u32 omap_cs3_phys(void) { - return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM) + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) ? 0 : OMAP_CS3_PHYS; } -- cgit v1.2.3 From f35ae6346850f6c192269b09088b20261760f0e0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:43 +0300 Subject: ARM: OMAP: USB: Change omap USB code to use omap_read/write instead of __REG Change omap USB code to use omap_read/write instead of __REG for multi-omap Cc: David Brownell Cc: linux-usb@vger.kernel.org Cc: i2c@lm-sensors.org Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/usb.h | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h index 2147d18aaea..ddf1861e6df 100644 --- a/include/asm-arm/arch-omap/usb.h +++ b/include/asm-arm/arch-omap/usb.h @@ -34,11 +34,8 @@ /* * OTG and transceiver registers, for OMAPs starting with ARM926 */ -#define OTG_REG32(offset) __REG32(OTG_BASE + (offset)) -#define OTG_REG16(offset) __REG16(OTG_BASE + (offset)) - -#define OTG_REV_REG OTG_REG32(0x00) -#define OTG_SYSCON_1_REG OTG_REG32(0x04) +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) # define USB2_TRX_MODE(w) (((w)>>24)&0x07) # define USB1_TRX_MODE(w) (((w)>>20)&0x07) # define USB0_TRX_MODE(w) (((w)>>16)&0x07) @@ -47,7 +44,7 @@ # define DEV_IDLE_EN (1 << 13) # define OTG_RESET_DONE (1 << 2) # define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2_REG OTG_REG32(0x08) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) # define OTG_EN (1 << 31) # define USBX_SYNCHRO (1 << 30) # define OTG_MST16 (1 << 29) @@ -65,7 +62,7 @@ # define HMC_TLLSPEED (1 << 7) # define HMC_TLLATTACH (1 << 6) # define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL_REG OTG_REG32(0x0c) +#define OTG_CTRL (OTG_BASE + 0x0c) # define OTG_USB2_EN (1 << 29) # define OTG_USB2_DP (1 << 28) # define OTG_USB2_DM (1 << 27) @@ -92,7 +89,7 @@ # define OTG_PD_VBUS (1 << 2) # define OTG_PU_VBUS (1 << 1) # define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN_REG OTG_REG16(0x10) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ # define DRIVER_SWITCH (1 << 15) # define A_VBUS_ERR (1 << 13) # define A_REQ_TMROUT (1 << 12) @@ -102,9 +99,9 @@ # define B_SRP_DONE (1 << 8) # define B_SRP_STARTED (1 << 7) # define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC_REG OTG_REG16(0x14) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ // same bits as in IRQ_EN -#define OTG_OUTCTRL_REG OTG_REG16(0x18) +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ # define OTGVPD (1 << 14) # define OTGVPU (1 << 13) # define OTGPUID (1 << 12) @@ -117,13 +114,13 @@ # define USB0VDR (1 << 2) # define USB0PDEN (1 << 1) # define USB0PUEN (1 << 0) -#define OTG_TEST_REG OTG_REG16(0x20) -#define OTG_VENDOR_CODE_REG OTG_REG32(0xfc) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ /*-------------------------------------------------------------------------*/ /* OMAP1 */ -#define USB_TRANSCEIVER_CTRL_REG __REG32(0xfffe1000 + 0x0064) +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) # define CONF_USB2_UNI_R (1 << 8) # define CONF_USB1_UNI_R (1 << 7) # define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -- cgit v1.2.3 From e1f80bfca86ab48b7bed731b32262fb1a2835de5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:43 +0300 Subject: ARM: OMAP: Remove __REG access for multi-omap This does not play nicely with multi-omap as it cannot be replaced by a function in io.c for omaps with different IO bases. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/io.h | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 160578e1f55..e1fb7ec7d47 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -183,35 +183,12 @@ #define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) #define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) -/* 16 bit uses LDRH/STRH, base +/- offset_8 */ -typedef struct { volatile u16 offset[256]; } __regbase16; -#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \ - ->offset[((vaddr)&0xff)>>1] -#define __REG16(paddr) __REGV16(io_p2v(paddr)) - -/* 8/32 bit uses LDR/STR, base +/- offset_12 */ -typedef struct { volatile u8 offset[4096]; } __regbase8; -#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \ - ->offset[((vaddr)&4095)>>0] -#define __REG8(paddr) __REGV8(io_p2v(paddr)) - -typedef struct { volatile u32 offset[4096]; } __regbase32; -#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \ - ->offset[((vaddr)&4095)>>2] -#define __REG32(paddr) __REGV32(io_p2v(paddr)) - extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); extern void omap2_init_common_hw(void); -#else - -#define __REG8(paddr) io_p2v(paddr) -#define __REG16(paddr) io_p2v(paddr) -#define __REG32(paddr) io_p2v(paddr) - #endif #endif -- cgit v1.2.3 From a58caad11301a5bdc2d7b76596ab5477221f7a9b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 3 Jul 2008 12:24:44 +0300 Subject: ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap New struct omap_globals contains the omap processor specific module bases. Use omap_globals to set the various base addresses to make detecting omap chip type simpler. Also introduce OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS for future multi-omap patches. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/common.h | 15 +++++++++++++++ include/asm-arm/arch-omap/control.h | 4 +--- include/asm-arm/arch-omap/io.h | 3 +++ 3 files changed, 19 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h index 36a3b62d4d8..8ac03071f60 100644 --- a/include/asm-arm/arch-omap/common.h +++ b/include/asm-arm/arch-omap/common.h @@ -47,8 +47,23 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, } #endif +/* IO bases for various OMAP processors */ +struct omap_globals { + void __iomem *tap; /* Control module ID code */ + void __iomem *sdrc; /* SDRAM Controller */ + void __iomem *sms; /* SDRAM Memory Scheduler */ + void __iomem *ctrl; /* System Control Module */ + void __iomem *prm; /* Power and Reset Management */ + void __iomem *cm; /* Clock Management */ +}; + void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); void omap2_set_globals_343x(void); +/* These get called from omap2_set_globals_xxxx(), do not call these */ +void omap2_set_globals_memory(struct omap_globals *); +void omap2_set_globals_control(struct omap_globals *); +void omap2_set_globals_prcm(struct omap_globals *); + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h index 59c0686f8be..987553e3eeb 100644 --- a/include/asm-arm/arch-omap/control.h +++ b/include/asm-arm/arch-omap/control.h @@ -167,8 +167,7 @@ #ifndef __ASSEMBLY__ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -extern void omap_ctrl_base_set(u32 base); -extern u32 omap_ctrl_base_get(void); +extern void __iomem *omap_ctrl_base_get(void); extern u8 omap_ctrl_readb(u16 offset); extern u16 omap_ctrl_readw(u16 offset); extern u32 omap_ctrl_readl(u16 offset); @@ -176,7 +175,6 @@ extern void omap_ctrl_writeb(u8 val, u16 offset); extern void omap_ctrl_writew(u16 val, u16 offset); extern void omap_ctrl_writel(u32 val, u16 offset); #else -#define omap_ctrl_base_set(x) WARN_ON(1) #define omap_ctrl_base_get() 0 #define omap_ctrl_readb(x) 0 #define omap_ctrl_readw(x) 0 diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index e1fb7ec7d47..0b13557fd30 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -60,6 +60,7 @@ #define IO_SIZE 0x40000 #define IO_VIRT (IO_PHYS - IO_OFFSET) #define IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) #define io_p2v(pa) ((pa) - IO_OFFSET) #define io_v2p(va) ((va) + IO_OFFSET) @@ -91,6 +92,7 @@ #define IO_OFFSET 0x90000000 #define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ #define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ #define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ @@ -148,6 +150,7 @@ #define IO_OFFSET 0x90000000 #define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ #define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ #define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ -- cgit v1.2.3 From 097c584cd48844d9ef8402bdc6ab49e7e2135f31 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 3 Jul 2008 12:24:45 +0300 Subject: ARM: OMAP: Add OMAP chip type structure; clean up mach-omap2/id.c Add a new OMAP chip identification interface, omap_chip_id. omap_chip_id is a structure which contains one bit for each OMAP2/3 CPU type, and on 3430, ES level. For example, the CHIP_IS_OMAP2420 bit is set in omap_chip at boot on an OMAP2420. On OMAP3430ES2, both CHIP_IS_OMAP3430 and CHIP_IS_OMAP3430ES2 bits are set. omap_chip is set in mach-omap2/id.c by _set_omap_chip(). Other code should use the omap_chip_is() function to test against omap_chip. Also, clean up id.c by splitting some code out of omap_check_revision() into its own function, _set_system_rev(); and converting some debug printk()s into pr_debug(). Second revision. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/cpu.h | 39 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h index e8a4cf52778..52db09f8328 100644 --- a/include/asm-arm/arch-omap/cpu.h +++ b/include/asm-arm/arch-omap/cpu.h @@ -3,7 +3,7 @@ * * OMAP cpu type detection * - * Copyright (C) 2004 Nokia Corporation + * Copyright (C) 2004, 2008 Nokia Corporation * * Written by Tony Lindgren * @@ -26,6 +26,12 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +struct omap_chip_id { + u8 oc; +}; + +#define OMAP_CHIP_INIT(x) { .oc = x } + extern unsigned int system_rev; #define omap2_cpu_rev() ((system_rev >> 12) & 0x0f) @@ -345,6 +351,33 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP2430_REV_ES1_0 0x24300000 #define OMAP3430_REV_ES1_0 0x34300000 #define OMAP3430_REV_ES2_0 0x34301000 +#define OMAP3430_REV_ES2_1 0x34302000 +#define OMAP3430_REV_ES2_2 0x34303000 + +/* + * omap_chip bits + * + * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is + * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates + * something that is only valid on that particular ES revision. + * + * These bits may be ORed together to indicate structures that are + * available on multiple chip types. + * + * To test whether a particular structure matches the current OMAP chip type, + * use omap_chip_is(). + * + */ +#define CHIP_IS_OMAP2420 (1 << 0) +#define CHIP_IS_OMAP2430 (1 << 1) +#define CHIP_IS_OMAP3430 (1 << 2) +#define CHIP_IS_OMAP3430ES1 (1 << 3) +#define CHIP_IS_OMAP3430ES2 (1 << 4) + +#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) + +int omap_chip_is(struct omap_chip_id oci); + /* * Macro to detect device type i.e. EMU/HS/TST/GP/BAD @@ -362,6 +395,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP) #define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD) -#endif +void omap2_check_revision(void); + +#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ #endif -- cgit v1.2.3 From 542313cc98e72d026d2df86f515699dfaface460 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 3 Jul 2008 12:24:45 +0300 Subject: ARM: OMAP2: Clock: Add OMAP3 DPLL autoidle functions This patch adds support for DPLL autoidle control to the OMAP3 clock framework. These functions will be used by the noncore DPLL enable and disable code - this is because, according to the CDP code, the DPLL autoidle status must be saved and restored across DPLL lock/bypass/off transitions. N.B.: the CORE DPLL (DPLL3) has three autoidle mode options, rather than just two. This code currently does not support the third option, low-power bypass autoidle. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/clock.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index 8490fbba39d..22daa5d64d3 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -34,11 +34,16 @@ struct dpll_data { u32 mult_mask; u32 div1_mask; # if defined(CONFIG_ARCH_OMAP3) + u8 modes; void __iomem *control_reg; u32 enable_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; + void __iomem *autoidle_reg; + u32 autoidle_mask; + void __iomem *idlest_reg; + u8 idlest_bit; # endif }; -- cgit v1.2.3 From 88b8ba90570067178d32c654ad95786041e86e86 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 3 Jul 2008 12:24:46 +0300 Subject: ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm This patch adds a new rate rounding algorithm for DPLL clocks on the OMAP2/3 architecture. For a desired DPLL target rate, there may be several multiplier/divider (M, N) values which will generate a sufficiently close rate. Lower N values result in greater power economy. However, lower N values can cause the difference between the rounded rate and the target rate ("rate error") to be larger than it would be with a higher N. This can cause downstream devices to run more slowly than they otherwise would. This DPLL rate rounding algorithm: - attempts to find the lowest possible N (DPLL divider) to reach the target_rate (since, according to Richard Woodruff , lower N values save more power than higher N values). - allows developers to set an upper bound on the error between the rounded rate and the desired target rate ("rate tolerance"), so an appropriate balance between rate fidelity and power savings can be set. This maximum rate error tolerance is set via omap2_set_dpll_rate_tolerance(). - never returns a rounded rate higher than the target rate. The rate rounding algorithm caches the last rounded M, N, and rate computation to avoid rounding the rate twice for each clk_set_rate() call. (This patch does not yet implement set_rate for DPLLs; that follows in a future patch.) The algorithm trades execution speed for rate accuracy. It will find the (M, N) set that results in the least rate error, within a specified rate tolerance. It does this by evaluating each divider setting - on OMAP3, this involves 128 steps. Another approach to DPLL rate rounding would be to bail out as soon as a valid rate is found within the rate tolerance, which would trade rate accuracy for execution speed. Alternate implementations welcome. This code is not yet used by the OMAP24XX DPLL clock, since it is currently defined as a composite clock, fusing the DPLL M,N and the M2 output divider. This patch also renames the existing OMAP24xx DPLL programming functions to highlight that they program both the DPLL and the DPLL's output multiplier. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/clock.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index 22daa5d64d3..4c7b3514f71 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -33,6 +33,13 @@ struct dpll_data { void __iomem *mult_div1_reg; u32 mult_mask; u32 div1_mask; + u16 last_rounded_m; + u8 last_rounded_n; + unsigned long last_rounded_rate; + unsigned int rate_tolerance; + u16 max_multiplier; + u8 max_divider; + u32 max_tolerance; # if defined(CONFIG_ARCH_OMAP3) u8 modes; void __iomem *control_reg; @@ -71,7 +78,7 @@ struct clk { void __iomem *clksel_reg; u32 clksel_mask; const struct clksel *clksel; - const struct dpll_data *dpll_data; + struct dpll_data *dpll_data; #else __u8 rate_offset; __u8 src_offset; -- cgit v1.2.3 From 5cca91479b8ac6a60b61bc56e72389c681387211 Mon Sep 17 00:00:00 2001 From: eric miao Date: Sun, 13 Apr 2008 21:46:34 +0100 Subject: [ARM] pxa: make zylonite use the generic PWM backlight driver Patch mostly by Eric Miao, minor edits by rmk. Signed-off-by: eric miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/zylonite.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index 4881b80f0f9..de577de8d18 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -15,7 +15,6 @@ struct platform_mmc_slot { extern struct platform_mmc_slot zylonite_mmc_slot[]; -extern int gpio_backlight; extern int gpio_eth_irq; extern int wm9713_irq; -- cgit v1.2.3 From 50bbb05d60e1897abad92d42bf185314be36bd74 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 19 Apr 2008 15:56:08 +0100 Subject: [ARM] rpc: deprecate __ioaddr() and __ioaddrc() helpers Now everything is converted to use MMIO accessors, these helpers are no longer required. Signed-off-by: Russell King --- include/asm-arm/arch-rpc/io.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h index b4da08d7a33..6bd2295c0e0 100644 --- a/include/asm-arm/arch-rpc/io.h +++ b/include/asm-arm/arch-rpc/io.h @@ -126,7 +126,7 @@ static inline unsigned sz __in##fnsuffix (unsigned int port) \ return (unsigned sz)value; \ } -static inline void __iomem *__ioaddr(unsigned int port) +static inline void __iomem *__deprecated __ioaddr(unsigned int port) { void __iomem *ret; if (__PORT_PCIO(port)) @@ -232,8 +232,7 @@ DECLARE_IO(int,l,"") result; \ }) -#define __ioaddrc(port) \ - ((__PORT_PCIO(port) ? PCIO_BASE : IO_BASE) + ((port) << 2)) +#define __ioaddrc(port) __ioaddr(port) #define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) #define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -- cgit v1.2.3 From 9ecba1f288d2cf87d1b6a9401d5ce17464eb776d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 19 Apr 2008 16:01:38 +0100 Subject: [ARM] rpc: ecard: remove deprecated ecard_address() and relatives ecard_address() is obsolete, and has been marked deprecated since at least 2.6.12-rc2. All in-tree users have been updated to use the new approach, so it's time to remove this. Signed-off-by: Russell King --- include/asm-arm/ecard.h | 35 ----------------------------------- 1 file changed, 35 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h index 684fe064523..5e22881a630 100644 --- a/include/asm-arm/ecard.h +++ b/include/asm-arm/ecard.h @@ -85,19 +85,6 @@ #define MAX_ECARDS 9 -typedef enum { /* Cards address space */ - ECARD_IOC, - ECARD_MEMC, - ECARD_EASI -} card_type_t; - -typedef enum { /* Speed for ECARD_IOC space */ - ECARD_SLOW = 0, - ECARD_MEDIUM = 1, - ECARD_FAST = 2, - ECARD_SYNC = 3 -} card_speed_t; - struct ecard_id { /* Card ID structure */ unsigned short manufacturer; unsigned short product; @@ -189,16 +176,6 @@ struct in_chunk_dir { } d; }; -/* - * ecard_claim: claim an expansion card entry - */ -#define ecard_claim(ec) ((ec)->claimed = 1) - -/* - * ecard_release: release an expansion card entry - */ -#define ecard_release(ec) ((ec)->claimed = 0) - /* * Read a chunk from an expansion card * cd : where to put read data @@ -208,18 +185,6 @@ struct in_chunk_dir { */ extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num); -/* - * Obtain the address of a card. This returns the "old style" address - * and should no longer be used. - */ -static inline unsigned int __deprecated -ecard_address(struct expansion_card *ec, card_type_t type, card_speed_t speed) -{ - extern unsigned int __ecard_address(struct expansion_card *, - card_type_t, card_speed_t); - return __ecard_address(ec, type, speed); -} - /* * Request and release ecard resources */ -- cgit v1.2.3 From 3c093f9f182eef6a8dc535f2c62b36a0320d0db1 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Mon, 9 Jun 2008 16:24:10 -0700 Subject: [ARM] fix header guards Acked-by: Dan Williams Signed-off-by: Vegard Nossum Signed-off-by: Andrew Morton Signed-off-by: Russell King --- include/asm-arm/arch-iop13xx/dma.h | 2 +- include/asm-arm/arch-msm/irqs.h | 1 + include/asm-arm/arch-msm/timex.h | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h index 2e15da53ff7..d79846fbb39 100644 --- a/include/asm-arm/arch-iop13xx/dma.h +++ b/include/asm-arm/arch-iop13xx/dma.h @@ -1,3 +1,3 @@ #ifndef _IOP13XX_DMA_H -#define _IOP13XX_DMA_H_ +#define _IOP13XX_DMA_H #endif diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h index 565430cfaa7..e62a108b185 100644 --- a/include/asm-arm/arch-msm/irqs.h +++ b/include/asm-arm/arch-msm/irqs.h @@ -15,6 +15,7 @@ */ #ifndef __ASM_ARCH_MSM_IRQS_H +#define __ASM_ARCH_MSM_IRQS_H /* MSM ARM11 Interrupt Numbers */ /* See 80-VE113-1 A, pp219-221 */ diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h index 154b23fb359..8724487ab4c 100644 --- a/include/asm-arm/arch-msm/timex.h +++ b/include/asm-arm/arch-msm/timex.h @@ -14,6 +14,7 @@ */ #ifndef __ASM_ARCH_MSM_TIMEX_H +#define __ASM_ARCH_MSM_TIMEX_H #define CLOCK_TICK_RATE 1000000 -- cgit v1.2.3 From 826cbdaff29764bb6928c715c6a025e49469dda9 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 13 Jun 2008 10:28:36 +0100 Subject: [ARM] 5092/1: Fix the I-cache invalidation on ARMv6 and later CPUs This patch adds the I-cache invalidation in update_mmu_cache if the corresponding vma is marked as executable. It also invalidates the I-cache if a thread migrates to a CPU it never ran on. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 7 +++++++ include/asm-arm/mmu_context.h | 5 +++++ 2 files changed, 12 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 759a97b56ee..559fb4af1f6 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -410,6 +410,13 @@ extern void flush_dcache_page(struct page *); extern void __flush_dcache_page(struct address_space *mapping, struct page *page); +static inline void __flush_icache_all(void) +{ + asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" + : + : "r" (0)); +} + #define ARCH_HAS_FLUSH_ANON_PAGE static inline void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr) diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 6913d02ca5d..91b9dfdfed5 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -97,6 +97,11 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, #ifdef CONFIG_MMU unsigned int cpu = smp_processor_id(); +#ifdef CONFIG_SMP + /* check for possible thread migration */ + if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask)) + __flush_icache_all(); +#endif if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) { check_context(next); cpu_switch_mm(next->pgd, next); -- cgit v1.2.3 From f7def13ed0775ee506c62a8612a124dce1776ac2 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Wed, 25 Jun 2008 13:25:13 +0100 Subject: [ARM] 5122/1: imx_dma_request_by_prio simpilfication imx_dma_request_by_prio can return channel number by itself. No need to supply variable address through parameters. Also converted all drivers using this function. Signed-off-by: Paulius Zaleckas Acked-by: Sascha Hauer Signed-off-by: Russell King --- include/asm-arm/arch-imx/imx-dma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h index 5b1066da4e1..44d89c35539 100644 --- a/include/asm-arm/arch-imx/imx-dma.h +++ b/include/asm-arm/arch-imx/imx-dma.h @@ -88,7 +88,7 @@ int imx_dma_request(imx_dmach_t dma_ch, const char *name); void imx_dma_free(imx_dmach_t dma_ch); -int imx_dma_request_by_prio(imx_dmach_t *pdma_ch, const char *name, imx_dma_prio prio); +imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio); #endif /* _ASM_ARCH_IMX_DMA_H */ -- cgit v1.2.3 From f348a2a2817e9d24b1edd4befc9659ec83501ca5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 3 Jul 2008 11:24:25 +0100 Subject: [ARM] S3C24XX: Add gpiolib support Add support for gpilib on all S3C24XX platforms. Signed-off-by: Ben Dooks --- include/asm-arm/arch-s3c2410/gpio.h | 74 ++++++------------------------------- 1 file changed, 12 insertions(+), 62 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h index 7583895fd33..18e10d2c35e 100644 --- a/include/asm-arm/arch-s3c2410/gpio.h +++ b/include/asm-arm/arch-s3c2410/gpio.h @@ -1,68 +1,18 @@ -/* - * linux/include/asm-arm/arch-s3c2410/gpio.h +/* linux/include/asm-arm/arch-s3c2410/gpio.h * - * S3C2410 GPIO wrappers for arch-neutral GPIO calls + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks * - * Written by Philipp Zabel + * S3C2410 - GPIO lib support * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_S3C2410_GPIO_H -#define __ASM_ARCH_S3C2410_GPIO_H - -#include -#include -#include - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - return; -} - -static inline int gpio_direction_input(unsigned gpio) -{ - s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_INPUT); - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_OUTPUT); - /* REVISIT can we write the value first, to avoid glitching? */ - s3c2410_gpio_setpin(gpio, value); - return 0; -} - -#define gpio_get_value(gpio) s3c2410_gpio_getpin(gpio) -#define gpio_set_value(gpio,value) s3c2410_gpio_setpin(gpio, value) - -#include /* cansleep wrappers */ - -#ifdef CONFIG_CPU_S3C2400 -#define gpio_to_irq(gpio) s3c2400_gpio_getirq(gpio) -#else -#define gpio_to_irq(gpio) s3c2410_gpio_getirq(gpio) -#endif + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ -/* FIXME implement irq_to_gpio() */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep -#endif +#include -- cgit v1.2.3 From b4b68f8cfaf583945019e41674cfa858c83316c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 3 Jul 2008 11:24:26 +0100 Subject: [ARM] S3C24XX: Add PWM timer MUX defines Add timer defines for the MUX settings for each of the PWM timers to add to the per-timer defines already in the file. Signed-off-by: Ben Dooks --- include/asm-arm/plat-s3c/regs-timer.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h index 8b0d594397b..b5bc692f348 100644 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ b/include/asm-arm/plat-s3c/regs-timer.h @@ -65,6 +65,15 @@ #define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) #define S3C2410_TCFG1_MUX0_MASK (15<<0) +#define S3C2410_TCFG1_MUX_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX_TCLK (4<<0) +#define S3C2410_TCFG1_MUX_MASK (15<<0) + +#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) + /* for each timer, we have an count buffer, an compare buffer and * an observation buffer */ -- cgit v1.2.3 From d5c52922b618aa6ddd6b5ebebc8d0a5ec9a20f10 Mon Sep 17 00:00:00 2001 From: Matthieu Castet Date: Thu, 3 Jul 2008 11:24:45 +0100 Subject: [ARM] S3C2412: Correct parents for EREFCLK and UREFCLK For s3c2412, set parent for clk_erefclk and clk_urefclk. This allow for example to use xtal or extclk for i2s clock. Signed-off-by: Ben Dooks Signed-off-by: Matthieu Castet --- include/asm-arm/arch-s3c2410/regs-clock.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index ecae9e7f5e4..37661358b42 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -189,6 +189,8 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) #define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) #define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) +#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12) +#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14) #endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ -- cgit v1.2.3 From 6fc601e37bbb4045ee0afefc76b64284ea800c89 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 13:17:24 +0100 Subject: [ARM] S3C24XX: PWM API support. Add support for PWM in the S3C24XX series of SoC via the PWM API. Signed-off-by: Ben Dooks --- include/asm-arm/plat-s3c24xx/devs.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h index f9d6f0317bc..badaac9d64a 100644 --- a/include/asm-arm/plat-s3c24xx/devs.h +++ b/include/asm-arm/plat-s3c24xx/devs.h @@ -21,6 +21,8 @@ extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; +extern struct platform_device s3c_device_timer[]; + extern struct platform_device s3c_device_usb; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; @@ -36,11 +38,6 @@ extern struct platform_device s3c_device_spi1; extern struct platform_device s3c_device_nand; -extern struct platform_device s3c_device_timer0; -extern struct platform_device s3c_device_timer1; -extern struct platform_device s3c_device_timer2; -extern struct platform_device s3c_device_timer3; - extern struct platform_device s3c_device_usbgadget; /* s3c2440 specific devices */ -- cgit v1.2.3 From 63dd10846d4917534e9ec7bddf43be786effe8b8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:43 +0200 Subject: MXC: do not include board specific header from architecture include do not include board-mx31ads.h from hardware.h, instead include it directly only where needed. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/hardware.h | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index e87ff0679d5..4ed2d8072d0 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -1,11 +1,20 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ @@ -19,13 +28,4 @@ #include -/* - * --------------------------------------------------------------------------- - * Board specific defines - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_MACH_MX31ADS -# include -#endif - #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ -- cgit v1.2.3 From 2582d8c1655f2eda42d5358a242b256fd6e88571 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:45 +0200 Subject: IMX UART: Add board specific init/exit functions Add platform specific init functions. Also rename the struct platform_device dev into pdev. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-imx/imx-uart.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h index 3a685e1780e..d54eb1d4802 100644 --- a/include/asm-arm/arch-imx/imx-uart.h +++ b/include/asm-arm/arch-imx/imx-uart.h @@ -4,6 +4,8 @@ #define IMXUART_HAVE_RTSCTS (1<<0) struct imxuart_platform_data { + int (*init)(struct platform_device *pdev); + void (*exit)(struct platform_device *pdev); unsigned int flags; }; -- cgit v1.2.3 From 38a41fdf94c449c165213e4665c3f8a0d30f8aba Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:46 +0200 Subject: IMX: introduce clock API This patch introduces the clock API for i.MX and converts all in-Kernel drivers to use it. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-imx/hardware.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h index adffb6acf42..6542ca5e8c3 100644 --- a/include/asm-arm/arch-imx/hardware.h +++ b/include/asm-arm/arch-imx/hardware.h @@ -73,14 +73,6 @@ */ extern void imx_gpio_mode( int gpio_mode ); -/* get frequencies in Hz */ -extern unsigned int imx_get_system_clk(void); -extern unsigned int imx_get_mcu_clk(void); -extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */ -extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12] */ -extern unsigned int imx_get_perclk3(void); /* SSI */ -extern unsigned int imx_get_hclk(void); /* SDRAM, CSI, Memory Stick,*/ - /* I2C, DMA */ #endif #define MAXIRQNUM 62 -- cgit v1.2.3 From c0db2ea4e366c94dd3f880928c02534156e3d1b9 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:47 +0200 Subject: MXC family: Add clock handling Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/clock.h | 67 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 include/asm-arm/arch-mxc/clock.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/clock.h b/include/asm-arm/arch-mxc/clock.h new file mode 100644 index 00000000000..24caa2b7c91 --- /dev/null +++ b/include/asm-arm/arch-mxc/clock.h @@ -0,0 +1,67 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_CLOCK_H__ +#define __ASM_ARCH_MXC_CLOCK_H__ + +#ifndef __ASSEMBLY__ +#include + +struct module; + +struct clk { + struct list_head node; + struct module *owner; + const char *name; + int id; + /* Source clock this clk depends on */ + struct clk *parent; + /* Secondary clock to enable/disable with this clock */ + struct clk *secondary; + /* Reference count of clock enable/disable */ + __s8 usecount; + /* Register bit position for clock's enable/disable control. */ + u8 enable_shift; + /* Register address for clock's enable/disable control. */ + u32 enable_reg; + u32 flags; + /* get the current clock rate (always a fresh value) */ + unsigned long (*get_rate) (struct clk *); + /* Function ptr to set the clock to a new rate. The rate must match a + supported rate returned from round_rate. Leave blank if clock is not + programmable */ + int (*set_rate) (struct clk *, unsigned long); + /* Function ptr to round the requested clock rate to the nearest + supported rate that is less than or equal to the requested rate. */ + unsigned long (*round_rate) (struct clk *, unsigned long); + /* Function ptr to enable the clock. Leave blank if clock can not + be gated. */ + int (*enable) (struct clk *); + /* Function ptr to disable the clock. Leave blank if clock can not + be gated. */ + void (*disable) (struct clk *); + /* Function ptr to set the parent clock of the clock. */ + int (*set_parent) (struct clk *, struct clk *); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ -- cgit v1.2.3 From df1bf4bdb2a3a26d4bde8ae1aefc16385dd4898f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:48 +0200 Subject: i.MX3: introduce clock API This patch introduces the clock API for for arch-mxc Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/common.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h index 23b4350edbd..c6d4aa36063 100644 --- a/include/asm-arm/arch-mxc/common.h +++ b/include/asm-arm/arch-mxc/common.h @@ -16,5 +16,6 @@ struct sys_timer; extern void mxc_map_io(void); extern void mxc_init_irq(void); extern struct sys_timer mxc_timer; +extern int mxc_clocks_init(unsigned long fref); #endif -- cgit v1.2.3 From e3d13ff4b9d3b05d7a969153e2c049548e25deea Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:48 +0200 Subject: mxc: add MX3 support for i.MX internal UART driver This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/imx-uart.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/asm-arm/arch-mxc/imx-uart.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/include/asm-arm/arch-mxc/imx-uart.h new file mode 100644 index 00000000000..83fb72c4048 --- /dev/null +++ b/include/asm-arm/arch-mxc/imx-uart.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef ASMARM_ARCH_UART_H +#define ASMARM_ARCH_UART_H + +#define IMXUART_HAVE_RTSCTS (1<<0) + +struct imxuart_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + unsigned int flags; +}; + +int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); + +#endif -- cgit v1.2.3 From 07bd1a6cc7cbb3f373fbe49b204c6cde5e9155fc Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:49 +0200 Subject: MXC arch: Add gpio support for the whole platform This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert Acked-by: Daniel Mack --- include/asm-arm/arch-mxc/common.h | 1 + include/asm-arm/arch-mxc/gpio.h | 42 +++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/mx31.h | 19 ++++++++++++++++++ 3 files changed, 62 insertions(+) create mode 100644 include/asm-arm/arch-mxc/gpio.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h index c6d4aa36063..8774783ed98 100644 --- a/include/asm-arm/arch-mxc/common.h +++ b/include/asm-arm/arch-mxc/common.h @@ -17,5 +17,6 @@ extern void mxc_map_io(void); extern void mxc_init_irq(void); extern struct sys_timer mxc_timer; extern int mxc_clocks_init(unsigned long fref); +extern int mxc_register_gpios(void); #endif diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h new file mode 100644 index 00000000000..d393e15f5a6 --- /dev/null +++ b/include/asm-arm/arch-mxc/gpio.h @@ -0,0 +1,42 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_GPIO_H__ +#define __ASM_ARCH_MXC_GPIO_H__ + +#include +#include + +/* use gpiolib dispatchers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio)) +#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES) + +struct mxc_gpio_port { + void __iomem *base; + int irq; + int virtual_irq_start; + struct gpio_chip chip; +}; + +int mxc_gpio_init(struct mxc_gpio_port*, int); + +#endif diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h index 36a1af495bb..98e6a4cd1ea 100644 --- a/include/asm-arm/arch-mxc/mx31.h +++ b/include/asm-arm/arch-mxc/mx31.h @@ -347,6 +347,25 @@ #define SYSTEM_REV_MIN CHIP_REV_1_0 #define SYSTEM_REV_NUM 3 +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x00 +#define GPIO_GDIR 0x04 +#define GPIO_PSR 0x08 +#define GPIO_ICR1 0x0C +#define GPIO_ICR2 0x10 +#define GPIO_IMR 0x14 +#define GPIO_ISR 0x18 +#define GPIO_INT_LOW_LEV 0x0 +#define GPIO_INT_HIGH_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_FALL_EDGE 0x3 +#define GPIO_INT_NONE 0x4 + +/* Mandatory defines used globally */ + +/* this CPU supports up to 96 GPIOs */ +#define ARCH_NR_GPIOS 96 + #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) /* this is a i.MX31 CPU */ -- cgit v1.2.3 From 90292ea60f1c730efb9fea02b2e12676da89ebef Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:50 +0200 Subject: MXC: add io multiplexing functions for mx3 This patch adds functions to use the io multiplexer on mx3 platforms. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/iomux-mx3.h | 501 +++++++++++++++++++++++++++++++++++ 1 file changed, 501 insertions(+) create mode 100644 include/asm-arm/arch-mxc/iomux-mx3.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/include/asm-arm/arch-mxc/iomux-mx3.h new file mode 100644 index 00000000000..7509e7692f0 --- /dev/null +++ b/include/asm-arm/arch-mxc/iomux-mx3.h @@ -0,0 +1,501 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX31_IOMUX_H__ +#define __MACH_MX31_IOMUX_H__ + +#include + +/* + * various IOMUX output functions + */ + +#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ +#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ +#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ +#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ +#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ +#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ +#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ +#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ +#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ +#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ +#define IOMUX_ICONFIG_FUNC 2 /* used as function */ +#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ +#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ + +#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) +#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) +#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) +#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) + +/* + * various IOMUX pad functions + */ +enum iomux_pad_config { + PAD_CTL_NOLOOPBACK = 0x0 << 9, + PAD_CTL_LOOPBACK = 0x1 << 9, + PAD_CTL_PKE_NONE = 0x0 << 8, + PAD_CTL_PKE_ENABLE = 0x1 << 8, + PAD_CTL_PUE_KEEPER = 0x0 << 7, + PAD_CTL_PUE_PUD = 0x1 << 7, + PAD_CTL_100K_PD = 0x0 << 5, + PAD_CTL_100K_PU = 0x1 << 5, + PAD_CTL_47K_PU = 0x2 << 5, + PAD_CTL_22K_PU = 0x3 << 5, + PAD_CTL_HYS_CMOS = 0x0 << 4, + PAD_CTL_HYS_SCHMITZ = 0x1 << 4, + PAD_CTL_ODE_CMOS = 0x0 << 3, + PAD_CTL_ODE_OpenDrain = 0x1 << 3, + PAD_CTL_DRV_NORMAL = 0x0 << 1, + PAD_CTL_DRV_HIGH = 0x1 << 1, + PAD_CTL_DRV_MAX = 0x2 << 1, + PAD_CTL_SRE_SLOW = 0x0 << 0, + PAD_CTL_SRE_FAST = 0x1 << 0 +}; + +/* + * various IOMUX general purpose functions + */ +enum iomux_gp_func { + MUX_PGP_FIRI = 1 << 0, + MUX_DDR_MODE = 1 << 1, + MUX_PGP_CSPI_BB = 1 << 2, + MUX_PGP_ATA_1 = 1 << 3, + MUX_PGP_ATA_2 = 1 << 4, + MUX_PGP_ATA_3 = 1 << 5, + MUX_PGP_ATA_4 = 1 << 6, + MUX_PGP_ATA_5 = 1 << 7, + MUX_PGP_ATA_6 = 1 << 8, + MUX_PGP_ATA_7 = 1 << 9, + MUX_PGP_ATA_8 = 1 << 10, + MUX_PGP_UH2 = 1 << 11, + MUX_SDCTL_CSD0_SEL = 1 << 12, + MUX_SDCTL_CSD1_SEL = 1 << 13, + MUX_CSPI1_UART3 = 1 << 14, + MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, + MUX_TAMPER_DETECT_EN = 1 << 16, + MUX_PGP_USB_4WIRE = 1 << 17, + MUX_PGB_USB_COMMON = 1 << 18, + MUX_SDHC_MEMSTICK1 = 1 << 19, + MUX_SDHC_MEMSTICK2 = 1 << 20, + MUX_PGP_SPLL_BYP = 1 << 21, + MUX_PGP_UPLL_BYP = 1 << 22, + MUX_PGP_MSHC1_CLK_SEL = 1 << 23, + MUX_PGP_MSHC2_CLK_SEL = 1 << 24, + MUX_CSPI3_UART5_SEL = 1 << 25, + MUX_PGP_ATA_9 = 1 << 26, + MUX_PGP_USB_SUSPEND = 1 << 27, + MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, + MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, + MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, + MUX_CLKO_DDR_MODE = 1 << 31, +}; + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void iomux_config_gpr(enum iomux_gp_func , bool); + +/* + * set the mode for a IOMUX pin. + */ +int mxc_iomux_mode(unsigned int); + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void mxc_iomux_set_gpr(enum iomux_gp_func, bool); + +#define IOMUX_PADNUM_MASK 0x1ff +#define IOMUX_GPIONUM_SHIFT 9 +#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) +#define IOMUX_MODE_SHIFT 17 +#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT) + +#define IOMUX_PIN(gpionum, padnum) \ + (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \ + (padnum & IOMUX_PADNUM_MASK)) + +#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT) + +#define IOMUX_TO_GPIO(iomux_pin) \ + ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) +#define IOMUX_TO_IRQ(iomux_pin) \ + (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \ + MXC_GPIO_INT_BASE) + +/* + * This enumeration is constructed based on the Section + * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated + * value is constructed based on the rules described above. + */ + +enum iomux_pins { + MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0), + MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1), + MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2), + MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3), + MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4), + MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5), + MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6), + MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7), + MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8), + MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9), + MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10), + MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11), + MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12), + MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13), + MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14), + MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15), + MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16), + MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17), + MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18), + MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), + MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), + MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), + MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), + MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), + MX31_PIN_READ = IOMUX_PIN(0xff, 24), + MX31_PIN_WRITE = IOMUX_PIN(0xff, 25), + MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26), + MX31_PIN_SER_RS = IOMUX_PIN(89, 27), + MX31_PIN_LCS1 = IOMUX_PIN(88, 28), + MX31_PIN_LCS0 = IOMUX_PIN(87, 29), + MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30), + MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31), + MX31_PIN_SD_D_I = IOMUX_PIN(84, 32), + MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), + MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), + MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), + MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36), + MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), + MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), + MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), + MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), + MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), + MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), + MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), + MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), + MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), + MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), + MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), + MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), + MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), + MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), + MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), + MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), + MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), + MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), + MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55), + MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56), + MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57), + MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58), + MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59), + MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60), + MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61), + MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62), + MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63), + MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64), + MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65), + MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66), + MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67), + MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68), + MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69), + MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70), + MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71), + MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72), + MX31_PIN_USB_BYP = IOMUX_PIN(31, 73), + MX31_PIN_USB_OC = IOMUX_PIN(30, 74), + MX31_PIN_USB_PWR = IOMUX_PIN(29, 75), + MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76), + MX31_PIN_DE_B = IOMUX_PIN(0xff, 77), + MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78), + MX31_PIN_TDO = IOMUX_PIN(0xff, 79), + MX31_PIN_TDI = IOMUX_PIN(0xff, 80), + MX31_PIN_TMS = IOMUX_PIN(0xff, 81), + MX31_PIN_TCK = IOMUX_PIN(0xff, 82), + MX31_PIN_RTCK = IOMUX_PIN(0xff, 83), + MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84), + MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85), + MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86), + MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87), + MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88), + MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89), + MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90), + MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91), + MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92), + MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93), + MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94), + MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95), + MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96), + MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97), + MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98), + MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99), + MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100), + MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101), + MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102), + MX31_PIN_TXD2 = IOMUX_PIN(28, 103), + MX31_PIN_RXD2 = IOMUX_PIN(27, 104), + MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105), + MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106), + MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107), + MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108), + MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109), + MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110), + MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111), + MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112), + MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113), + MX31_PIN_CTS1 = IOMUX_PIN(39, 114), + MX31_PIN_RTS1 = IOMUX_PIN(38, 115), + MX31_PIN_TXD1 = IOMUX_PIN(37, 116), + MX31_PIN_RXD1 = IOMUX_PIN(36, 117), + MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118), + MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119), + MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120), + MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121), + MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122), + MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123), + MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124), + MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125), + MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126), + MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127), + MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128), + MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129), + MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130), + MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131), + MX31_PIN_SFS6 = IOMUX_PIN(26, 132), + MX31_PIN_SCK6 = IOMUX_PIN(25, 133), + MX31_PIN_SRXD6 = IOMUX_PIN(24, 134), + MX31_PIN_STXD6 = IOMUX_PIN(23, 135), + MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136), + MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137), + MX31_PIN_SRXD5 = IOMUX_PIN(22, 138), + MX31_PIN_STXD5 = IOMUX_PIN(21, 139), + MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140), + MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141), + MX31_PIN_SRXD4 = IOMUX_PIN(20, 142), + MX31_PIN_STXD4 = IOMUX_PIN(19, 143), + MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144), + MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145), + MX31_PIN_SRXD3 = IOMUX_PIN(18, 146), + MX31_PIN_STXD3 = IOMUX_PIN(17, 147), + MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148), + MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149), + MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150), + MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151), + MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152), + MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153), + MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154), + MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155), + MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156), + MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157), + MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158), + MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159), + MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160), + MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161), + MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162), + MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163), + MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164), + MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165), + MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166), + MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167), + MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168), + MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169), + MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170), + MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171), + MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172), + MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173), + MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174), + MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175), + MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176), + MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177), + MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178), + MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179), + MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180), + MX31_PIN_D0 = IOMUX_PIN(0xff, 181), + MX31_PIN_D1 = IOMUX_PIN(0xff, 182), + MX31_PIN_D2 = IOMUX_PIN(0xff, 183), + MX31_PIN_D3 = IOMUX_PIN(0xff, 184), + MX31_PIN_D4 = IOMUX_PIN(0xff, 185), + MX31_PIN_D5 = IOMUX_PIN(0xff, 186), + MX31_PIN_D6 = IOMUX_PIN(0xff, 187), + MX31_PIN_D7 = IOMUX_PIN(0xff, 188), + MX31_PIN_D8 = IOMUX_PIN(0xff, 189), + MX31_PIN_D9 = IOMUX_PIN(0xff, 190), + MX31_PIN_D10 = IOMUX_PIN(0xff, 191), + MX31_PIN_D11 = IOMUX_PIN(0xff, 192), + MX31_PIN_D12 = IOMUX_PIN(0xff, 193), + MX31_PIN_D13 = IOMUX_PIN(0xff, 194), + MX31_PIN_D14 = IOMUX_PIN(0xff, 195), + MX31_PIN_D15 = IOMUX_PIN(0xff, 196), + MX31_PIN_NFRB = IOMUX_PIN(16, 197), + MX31_PIN_NFCE_B = IOMUX_PIN(15, 198), + MX31_PIN_NFWP_B = IOMUX_PIN(14, 199), + MX31_PIN_NFCLE = IOMUX_PIN(13, 200), + MX31_PIN_NFALE = IOMUX_PIN(12, 201), + MX31_PIN_NFRE_B = IOMUX_PIN(11, 202), + MX31_PIN_NFWE_B = IOMUX_PIN(10, 203), + MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204), + MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205), + MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206), + MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207), + MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208), + MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209), + MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210), + MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211), + MX31_PIN_SDWE = IOMUX_PIN(0xff, 212), + MX31_PIN_CAS = IOMUX_PIN(0xff, 213), + MX31_PIN_RAS = IOMUX_PIN(0xff, 214), + MX31_PIN_RW = IOMUX_PIN(0xff, 215), + MX31_PIN_BCLK = IOMUX_PIN(0xff, 216), + MX31_PIN_LBA = IOMUX_PIN(0xff, 217), + MX31_PIN_ECB = IOMUX_PIN(0xff, 218), + MX31_PIN_CS5 = IOMUX_PIN(0xff, 219), + MX31_PIN_CS4 = IOMUX_PIN(0xff, 220), + MX31_PIN_CS3 = IOMUX_PIN(0xff, 221), + MX31_PIN_CS2 = IOMUX_PIN(0xff, 222), + MX31_PIN_CS1 = IOMUX_PIN(0xff, 223), + MX31_PIN_CS0 = IOMUX_PIN(0xff, 224), + MX31_PIN_OE = IOMUX_PIN(0xff, 225), + MX31_PIN_EB1 = IOMUX_PIN(0xff, 226), + MX31_PIN_EB0 = IOMUX_PIN(0xff, 227), + MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228), + MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229), + MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230), + MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231), + MX31_PIN_SD31 = IOMUX_PIN(0xff, 232), + MX31_PIN_SD30 = IOMUX_PIN(0xff, 233), + MX31_PIN_SD29 = IOMUX_PIN(0xff, 234), + MX31_PIN_SD28 = IOMUX_PIN(0xff, 235), + MX31_PIN_SD27 = IOMUX_PIN(0xff, 236), + MX31_PIN_SD26 = IOMUX_PIN(0xff, 237), + MX31_PIN_SD25 = IOMUX_PIN(0xff, 238), + MX31_PIN_SD24 = IOMUX_PIN(0xff, 239), + MX31_PIN_SD23 = IOMUX_PIN(0xff, 240), + MX31_PIN_SD22 = IOMUX_PIN(0xff, 241), + MX31_PIN_SD21 = IOMUX_PIN(0xff, 242), + MX31_PIN_SD20 = IOMUX_PIN(0xff, 243), + MX31_PIN_SD19 = IOMUX_PIN(0xff, 244), + MX31_PIN_SD18 = IOMUX_PIN(0xff, 245), + MX31_PIN_SD17 = IOMUX_PIN(0xff, 246), + MX31_PIN_SD16 = IOMUX_PIN(0xff, 247), + MX31_PIN_SD15 = IOMUX_PIN(0xff, 248), + MX31_PIN_SD14 = IOMUX_PIN(0xff, 249), + MX31_PIN_SD13 = IOMUX_PIN(0xff, 250), + MX31_PIN_SD12 = IOMUX_PIN(0xff, 251), + MX31_PIN_SD11 = IOMUX_PIN(0xff, 252), + MX31_PIN_SD10 = IOMUX_PIN(0xff, 253), + MX31_PIN_SD9 = IOMUX_PIN(0xff, 254), + MX31_PIN_SD8 = IOMUX_PIN(0xff, 255), + MX31_PIN_SD7 = IOMUX_PIN(0xff, 256), + MX31_PIN_SD6 = IOMUX_PIN(0xff, 257), + MX31_PIN_SD5 = IOMUX_PIN(0xff, 258), + MX31_PIN_SD4 = IOMUX_PIN(0xff, 259), + MX31_PIN_SD3 = IOMUX_PIN(0xff, 260), + MX31_PIN_SD2 = IOMUX_PIN(0xff, 261), + MX31_PIN_SD1 = IOMUX_PIN(0xff, 262), + MX31_PIN_SD0 = IOMUX_PIN(0xff, 263), + MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264), + MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265), + MX31_PIN_A25 = IOMUX_PIN(0xff, 266), + MX31_PIN_A24 = IOMUX_PIN(0xff, 267), + MX31_PIN_A23 = IOMUX_PIN(0xff, 268), + MX31_PIN_A22 = IOMUX_PIN(0xff, 269), + MX31_PIN_A21 = IOMUX_PIN(0xff, 270), + MX31_PIN_A20 = IOMUX_PIN(0xff, 271), + MX31_PIN_A19 = IOMUX_PIN(0xff, 272), + MX31_PIN_A18 = IOMUX_PIN(0xff, 273), + MX31_PIN_A17 = IOMUX_PIN(0xff, 274), + MX31_PIN_A16 = IOMUX_PIN(0xff, 275), + MX31_PIN_A14 = IOMUX_PIN(0xff, 276), + MX31_PIN_A15 = IOMUX_PIN(0xff, 277), + MX31_PIN_A13 = IOMUX_PIN(0xff, 278), + MX31_PIN_A12 = IOMUX_PIN(0xff, 279), + MX31_PIN_A11 = IOMUX_PIN(0xff, 280), + MX31_PIN_MA10 = IOMUX_PIN(0xff, 281), + MX31_PIN_A10 = IOMUX_PIN(0xff, 282), + MX31_PIN_A9 = IOMUX_PIN(0xff, 283), + MX31_PIN_A8 = IOMUX_PIN(0xff, 284), + MX31_PIN_A7 = IOMUX_PIN(0xff, 285), + MX31_PIN_A6 = IOMUX_PIN(0xff, 286), + MX31_PIN_A5 = IOMUX_PIN(0xff, 287), + MX31_PIN_A4 = IOMUX_PIN(0xff, 288), + MX31_PIN_A3 = IOMUX_PIN(0xff, 289), + MX31_PIN_A2 = IOMUX_PIN(0xff, 290), + MX31_PIN_A1 = IOMUX_PIN(0xff, 291), + MX31_PIN_A0 = IOMUX_PIN(0xff, 292), + MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293), + MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294), + MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295), + MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296), + MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297), + MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298), + MX31_PIN_CKIL = IOMUX_PIN(0xff, 299), + MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300), + MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301), + MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302), + MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303), + MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304), + MX31_PIN_CLKO = IOMUX_PIN(0xff, 305), + MX31_PIN_POR_B = IOMUX_PIN(0xff, 306), + MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307), + MX31_PIN_CKIH = IOMUX_PIN(0xff, 308), + MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309), + MX31_PIN_SRX0 = IOMUX_PIN(34, 310), + MX31_PIN_STX0 = IOMUX_PIN(33, 311), + MX31_PIN_SVEN0 = IOMUX_PIN(32, 312), + MX31_PIN_SRST0 = IOMUX_PIN(67, 313), + MX31_PIN_SCLK0 = IOMUX_PIN(66, 314), + MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315), + MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316), + MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317), + MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318), + MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319), + MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320), + MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321), + MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322), + MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323), + MX31_PIN_PWMO = IOMUX_PIN( 9, 324), + MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325), + MX31_PIN_COMPARE = IOMUX_PIN( 8, 326), + MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), +}; + +/* + * Convenience values for use with mxc_iomux_mode() + * + * Format here is MX31_PIN_(pin name)__(function) + */ +#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) + +/* + * This function configures the pad value for a IOMUX pin. + */ +void mxc_iomux_set_pad(enum iomux_pins, u32); + +#endif + -- cgit v1.2.3 From d0f349fbce2905607e0473d2358f97f48866e52c Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:50 +0200 Subject: i.MXC family: Adding timer support This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/common.h | 4 +- include/asm-arm/arch-mxc/mxc.h | 112 ++++--------------------- include/asm-arm/arch-mxc/mxc_timer.h | 158 +++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+), 100 deletions(-) create mode 100644 include/asm-arm/arch-mxc/mxc_timer.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h index 8774783ed98..a6d2e24aab1 100644 --- a/include/asm-arm/arch-mxc/common.h +++ b/include/asm-arm/arch-mxc/common.h @@ -11,11 +11,9 @@ #ifndef __ASM_ARCH_MXC_COMMON_H__ #define __ASM_ARCH_MXC_COMMON_H__ -struct sys_timer; - extern void mxc_map_io(void); extern void mxc_init_irq(void); -extern struct sys_timer mxc_timer; +extern void mxc_timer_init(const char *clk_timer); extern int mxc_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 146d3f60951..1df4e2f2492 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -1,11 +1,20 @@ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_H__ @@ -20,97 +29,6 @@ # define cpu_is_mx31() (0) #endif -/* - ***************************************** - * GPT Register definitions * - ***************************************** - */ -#define MXC_GPT_GPTCR IO_ADDRESS(GPT1_BASE_ADDR + 0x00) -#define MXC_GPT_GPTPR IO_ADDRESS(GPT1_BASE_ADDR + 0x04) -#define MXC_GPT_GPTSR IO_ADDRESS(GPT1_BASE_ADDR + 0x08) -#define MXC_GPT_GPTIR IO_ADDRESS(GPT1_BASE_ADDR + 0x0C) -#define MXC_GPT_GPTOCR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x10) -#define MXC_GPT_GPTOCR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x14) -#define MXC_GPT_GPTOCR3 IO_ADDRESS(GPT1_BASE_ADDR + 0x18) -#define MXC_GPT_GPTICR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x1C) -#define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20) -#define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24) - -/* GPT Control register bit definitions */ -#define GPTCR_FO3 (1 << 31) -#define GPTCR_FO2 (1 << 30) -#define GPTCR_FO1 (1 << 29) - -#define GPTCR_OM3_SHIFT 26 -#define GPTCR_OM3_MASK (7 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_DISCONNECTED (0 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_TOGGLE (1 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_CLEAR (2 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_SET (3 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_GENERATE_LOW (7 << GPTCR_OM3_SHIFT) - -#define GPTCR_OM2_SHIFT 23 -#define GPTCR_OM2_MASK (7 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_DISCONNECTED (0 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_TOGGLE (1 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_CLEAR (2 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_SET (3 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_GENERATE_LOW (7 << GPTCR_OM2_SHIFT) - -#define GPTCR_OM1_SHIFT 20 -#define GPTCR_OM1_MASK (7 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_DISCONNECTED (0 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_TOGGLE (1 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_CLEAR (2 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_SET (3 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_GENERATE_LOW (7 << GPTCR_OM1_SHIFT) - -#define GPTCR_IM2_SHIFT 18 -#define GPTCR_IM2_MASK (3 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_DISABLE (0 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_RISING (1 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_FALLING (2 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_BOTH (3 << GPTCR_IM2_SHIFT) - -#define GPTCR_IM1_SHIFT 16 -#define GPTCR_IM1_MASK (3 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_DISABLE (0 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_RISING (1 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_FALLING (2 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_BOTH (3 << GPTCR_IM1_SHIFT) - -#define GPTCR_SWR (1 << 15) -#define GPTCR_FRR (1 << 9) - -#define GPTCR_CLKSRC_SHIFT 6 -#define GPTCR_CLKSRC_MASK (7 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_NOCLOCK (0 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_HIGHFREQ (2 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_CLKIN (3 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_CLK32K (7 << GPTCR_CLKSRC_SHIFT) - -#define GPTCR_STOPEN (1 << 5) -#define GPTCR_DOZEN (1 << 4) -#define GPTCR_WAITEN (1 << 3) -#define GPTCR_DBGEN (1 << 2) - -#define GPTCR_ENMOD (1 << 1) -#define GPTCR_ENABLE (1 << 0) - -#define GPTSR_OF1 (1 << 0) -#define GPTSR_OF2 (1 << 1) -#define GPTSR_OF3 (1 << 2) -#define GPTSR_IF1 (1 << 3) -#define GPTSR_IF2 (1 << 4) -#define GPTSR_ROV (1 << 5) - -#define GPTIR_OF1IE GPTSR_OF1 -#define GPTIR_OF2IE GPTSR_OF2 -#define GPTIR_OF3IE GPTSR_OF3 -#define GPTIR_IF1IE GPTSR_IF1 -#define GPTIR_IF2IE GPTSR_IF2 -#define GPTIR_ROVIE GPTSR_ROV - /* ***************************************** * AVIC Registers * diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h new file mode 100644 index 00000000000..6cb11f4f1a0 --- /dev/null +++ b/include/asm-arm/arch-mxc/mxc_timer.h @@ -0,0 +1,158 @@ +/* + * mxc_timer.h + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef __PLAT_MXC_TIMER_H +#define __PLAT_MXC_TIMER_H + +#include +#include + +#ifdef CONFIG_ARCH_IMX +#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) +#define TIMER_INTERRUPT TIM1_INT + +#define TCTL_VAL TCTL_CLK_PCLK1 +#define TCTL_IRQEN (1<<4) +#define TCTL_FRR (1<<8) +#define TCTL_CLK_PCLK1 (1<<1) +#define TCTL_CLK_PCLK1_4 (2<<1) +#define TCTL_CLK_TIN (3<<1) +#define TCTL_CLK_32 (4<<1) + +#define MXC_TCTL 0x00 +#define MXC_TPRER 0x04 +#define MXC_TCMP 0x08 +#define MXC_TCR 0x0c +#define MXC_TCN 0x10 +#define MXC_TSTAT 0x14 +#define TSTAT_CAPT (1<<1) +#define TSTAT_COMP (1<<0) + +static inline void gpt_irq_disable(void) +{ + unsigned int tmp; + + tmp = __raw_readl(TIMER_BASE + MXC_TCTL); + __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); +} + +static inline void gpt_irq_enable(void) +{ + __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, + TIMER_BASE + MXC_TCTL); +} + +static void gpt_irq_acknowledge(void) +{ + __raw_writel(0, TIMER_BASE + MXC_TSTAT); +} +#endif /* CONFIG_ARCH_IMX */ + +#ifdef CONFIG_ARCH_MX2 +#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) +#define TIMER_INTERRUPT MXC_INT_GPT1 + +#define MXC_TCTL 0x00 +#define TCTL_VAL TCTL_CLK_PCLK1 +#define TCTL_CLK_PCLK1 (1<<1) +#define TCTL_CLK_PCLK1_4 (2<<1) +#define TCTL_IRQEN (1<<4) +#define TCTL_FRR (1<<8) +#define MXC_TPRER 0x04 +#define MXC_TCMP 0x08 +#define MXC_TCR 0x0c +#define MXC_TCN 0x10 +#define MXC_TSTAT 0x14 +#define TSTAT_CAPT (1<<1) +#define TSTAT_COMP (1<<0) + +static inline void gpt_irq_disable(void) +{ + unsigned int tmp; + + tmp = __raw_readl(TIMER_BASE + MXC_TCTL); + __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); +} + +static inline void gpt_irq_enable(void) +{ + __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, + TIMER_BASE + MXC_TCTL); +} + +static void gpt_irq_acknowledge(void) +{ + __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); +} +#endif /* CONFIG_ARCH_MX2 */ + +#ifdef CONFIG_ARCH_MX3 +#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) +#define TIMER_INTERRUPT MXC_INT_GPT + +#define MXC_TCTL 0x00 +#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) +#define TCTL_CLK_IPG (1<<6) +#define TCTL_FRR (1<<9) +#define TCTL_WAITEN (1<<3) + +#define MXC_TPRER 0x04 +#define MXC_TSTAT 0x08 +#define TSTAT_OF1 (1<<0) +#define TSTAT_OF2 (1<<1) +#define TSTAT_OF3 (1<<2) +#define TSTAT_IF1 (1<<3) +#define TSTAT_IF2 (1<<4) +#define TSTAT_ROV (1<<5) +#define MXC_IR 0x0c +#define MXC_TCMP 0x10 +#define MXC_TCMP2 0x14 +#define MXC_TCMP3 0x18 +#define MXC_TCR 0x1c +#define MXC_TCN 0x24 + +static inline void gpt_irq_disable(void) +{ + __raw_writel(0, TIMER_BASE + MXC_IR); +} + +static inline void gpt_irq_enable(void) +{ + __raw_writel(1<<0, TIMER_BASE + MXC_IR); +} + +static inline void gpt_irq_acknowledge(void) +{ + __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); +} +#endif /* CONFIG_ARCH_MX3 */ + +#define TCTL_SWR (1<<15) +#define TCTL_CC (1<<10) +#define TCTL_OM (1<<9) +#define TCTL_CAP_RIS (1<<6) +#define TCTL_CAP_FAL (2<<6) +#define TCTL_CAP_RIS_FAL (3<<6) +#define TCTL_CAP_ENA (1<<5) +#define TCTL_TEN (1<<0) + +#endif -- cgit v1.2.3 From 4bc256501a159abc7e9fee43f63c68894f6a11d8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:51 +0200 Subject: MXC: add debug-macro.S for mxc This patch adds debug-macro.S for arch-mxc Disadvantage: Due to the board specific UART definition, these macros (and compile time) will fail for multi board kernels. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/board-mx31ads.h | 5 +++++ include/asm-arm/arch-mxc/debug-macro.S | 38 ++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) create mode 100644 include/asm-arm/arch-mxc/debug-macro.S (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h index 8590127760a..1bc6fb0f9a8 100644 --- a/include/asm-arm/arch-mxc/board-mx31ads.h +++ b/include/asm-arm/arch-mxc/board-mx31ads.h @@ -109,4 +109,9 @@ #define MXC_MAX_EXP_IO_LINES 16 +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S new file mode 100644 index 00000000000..34befbb2ea4 --- /dev/null +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -0,0 +1,38 @@ +/* linux/include/asm-arm/arch-imx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +#ifdef CONFIG_MACH_MX31ADS +#include +#endif + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =MXC_LL_UART_PADDR @ physical + ldrne \rx, =MXC_LL_UART_VADDR @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x40] @ TXDATA + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x98] @ SR2 + tst \rd, #1 << 3 @ TXDC + beq 1002b @ wait until transmit done + .endm -- cgit v1.2.3 From ce8ffef0bfd6e55d5da3923d8e9af27c3b5c4eff Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:52 +0200 Subject: MX31: add basic pcm037 board support This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/board-pcm037.h | 27 +++++++++++++++++++++++++++ include/asm-arm/arch-mxc/debug-macro.S | 3 +++ 2 files changed, 30 insertions(+) create mode 100644 include/asm-arm/arch-mxc/board-pcm037.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/include/asm-arm/arch-mxc/board-pcm037.h new file mode 100644 index 00000000000..82232ba3c8f --- /dev/null +++ b/include/asm-arm/arch-mxc/board-pcm037.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2008 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ +#define __ASM_ARCH_MXC_BOARD_PCM037_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index 34befbb2ea4..81caa0aacfe 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -15,6 +15,9 @@ #ifdef CONFIG_MACH_MX31ADS #include +#endif +#ifdef CONFIG_MACH_PCM037 +#include #endif .macro addruart,rx -- cgit v1.2.3 From 9a4cd7a5c836e189a1712c9ffd2d76b2302ce212 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 5 Jul 2008 10:02:53 +0200 Subject: MX3: Add basic support for LogicPD i.MX31 LiteKit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+) --- include/asm-arm/arch-mxc/board-mx31lite.h | 38 +++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/debug-macro.S | 3 +++ 2 files changed, 41 insertions(+) create mode 100644 include/asm-arm/arch-mxc/board-mx31lite.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/include/asm-arm/arch-mxc/board-mx31lite.h new file mode 100644 index 00000000000..e4e5cf5ad7d --- /dev/null +++ b/include/asm-arm/arch-mxc/board-mx31lite.h @@ -0,0 +1,38 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ +#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ + +#define MXC_MAX_EXP_IO_LINES 16 + + +/* + * Memory Size parameters + */ + +/* + * Size of SDRAM memory + */ +#define SDRAM_MEM_SIZE SZ_128M +/* + * Size of MBX buffer memory + */ +#define MXC_MBX_MEM_SIZE SZ_16M +/* + * Size of memory available to kernel + */ +#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ + diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index 81caa0aacfe..5add48b6665 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -18,6 +18,9 @@ #endif #ifdef CONFIG_MACH_PCM037 #include +#endif +#ifdef CONFIG_MACH_MX31LITE +#include #endif .macro addruart,rx -- cgit v1.2.3 From 259bcaae9a2f28d7e3303b202b64a1fb0a9ab9e4 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:54 +0200 Subject: MXC arch: Simplify architecture's irq sources Simplify architecture's irq headers and sources, to share these files between MXC3 and MXC2. Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/irqs.h | 13 ------------- include/asm-arm/arch-mxc/mx31.h | 2 ++ include/asm-arm/arch-mxc/mxc.h | 38 -------------------------------------- 3 files changed, 2 insertions(+), 51 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h index b2c5205e196..f416130718c 100644 --- a/include/asm-arm/arch-mxc/irqs.h +++ b/include/asm-arm/arch-mxc/irqs.h @@ -13,17 +13,4 @@ #include -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE) -#define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x) - -/* Number of normal interrupts */ -#define NR_IRQS (MXC_MAX_INT_LINES + \ - MXC_MAX_GPIO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* Number of fast interrupts */ -#define NR_FIQS MXC_MAX_INTS - #endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h index 98e6a4cd1ea..a7373e4a56c 100644 --- a/include/asm-arm/arch-mxc/mx31.h +++ b/include/asm-arm/arch-mxc/mx31.h @@ -320,6 +320,8 @@ #define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) #define MXC_MAX_VIRTUAL_INTS 16 +#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS) + /*! * Number of GPIO port as defined in the IC Spec */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 1df4e2f2492..3e1c4ded18e 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -29,42 +29,4 @@ # define cpu_is_mx31() (0) #endif -/* - ***************************************** - * AVIC Registers * - ***************************************** - */ -#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ -#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ -#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ -#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ -#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ -#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ -#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ -#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ -#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */ -#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */ -#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */ -#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */ -#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */ -#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */ -#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */ -#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */ -#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ -#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ -#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ -#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ -#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ -#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ -#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ -#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ -#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ -#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ - -#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) -#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) -#define IIM_PROD_REV_SH 3 -#define IIM_PROD_REV_LEN 5 - #endif /* __ASM_ARCH_MXC_H__ */ -- cgit v1.2.3 From aa10abd381b9493a88f6b9e111adc79e33d548fa Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:55 +0200 Subject: i.MX2 family: Add GPIO multiplexing support This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/iomux-mx1-mx2.h | 372 +++++++++++++++++++++++++++++++ 1 file changed, 372 insertions(+) create mode 100644 include/asm-arm/arch-mxc/iomux-mx1-mx2.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h new file mode 100644 index 00000000000..076d37b38eb --- /dev/null +++ b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h @@ -0,0 +1,372 @@ +/* + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef _MXC_GPIO_MX1_MX2_H +#define _MXC_GPIO_MX1_MX2_H + +#include + +#define MXC_GPIO_ALLOC_MODE_NORMAL 0 +#define MXC_GPIO_ALLOC_MODE_NO_ALLOC 1 +#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC 2 +#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY 4 +#define MXC_GPIO_ALLOC_MODE_RELEASE 8 + +/* + * GPIO Module and I/O Multiplexer + * x = 0..3 for reg_A, reg_B, reg_C, reg_D + */ +#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) +#define MXC_DDIR(x) (0x00 + ((x) << 8)) +#define MXC_OCR1(x) (0x04 + ((x) << 8)) +#define MXC_OCR2(x) (0x08 + ((x) << 8)) +#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) +#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) +#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) +#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) +#define MXC_DR(x) (0x1c + ((x) << 8)) +#define MXC_GIUS(x) (0x20 + ((x) << 8)) +#define MXC_SSR(x) (0x24 + ((x) << 8)) +#define MXC_ICR1(x) (0x28 + ((x) << 8)) +#define MXC_ICR2(x) (0x2c + ((x) << 8)) +#define MXC_IMR(x) (0x30 + ((x) << 8)) +#define MXC_ISR(x) (0x34 + ((x) << 8)) +#define MXC_GPR(x) (0x38 + ((x) << 8)) +#define MXC_SWR(x) (0x3c + ((x) << 8)) +#define MXC_PUEN(x) (0x40 + ((x) << 8)) + +#ifdef CONFIG_ARCH_MX1 +# define GPIO_PORT_MAX 3 +#endif +#ifdef CONFIG_ARCH_MX2 +# define GPIO_PORT_MAX 5 +#endif + +#ifndef GPIO_PORT_MAX +# error "GPIO config port count unknown!" +#endif + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +#define GPIO_OUT (1 << 8) +#define GPIO_IN (0 << 8) +#define GPIO_PUEN (1 << 9) + +#define GPIO_PF (1 << 10) +#define GPIO_AF (1 << 11) + +#define GPIO_OCR_SHIFT 12 +#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) +#define GPIO_AIN (0 << GPIO_OCR_SHIFT) +#define GPIO_BIN (1 << GPIO_OCR_SHIFT) +#define GPIO_CIN (2 << GPIO_OCR_SHIFT) +#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) + +#define GPIO_AOUT_SHIFT 14 +#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) + +#define GPIO_BOUT_SHIFT 16 +#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + +extern void mxc_gpio_mode(int gpio_mode); +extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + int alloc_mode, const char *label); + +/*-------------------------------------------------------------------------*/ + +/* assignements for GPIO alternate/primary functions */ + +/* FIXME: This list is not completed. The correct directions are + * missing on some (many) pins + */ +#ifdef CONFIG_ARCH_MX1 +#define PA0_AIN_SPI2_CLK (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0) +#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) +#define PA1_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1) +#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2) +#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) +#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) +#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) +#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) +#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) +#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) +#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) +#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) +#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) +#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) +#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) +#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) +#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) +#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) +#define PA17_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17) +#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) +#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) +#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) +#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) +#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) +#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) +#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) +#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) +#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) +#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) +#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) +#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) +#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) +#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) +#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) +#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) +#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) +#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) +#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) +#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) +#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) +#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) +#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) +#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) +#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) +#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) +#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) +#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) +#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) +#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) +#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) +#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) +#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) +#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16) +#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17) +#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) +#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) +#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) +#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) +#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22) +#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) +#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) +#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28) +#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29) +#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30) +#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31) +#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) +#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) +#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) +#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6) +#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) +#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10) +#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) +#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12) +#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) +#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) +#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) +#define PC24_BIN_UART3_RI (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24) +#define PC25_BIN_UART3_DSR (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25) +#define PC26_AOUT_UART3_DTR (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26) +#define PC27_BIN_UART3_DCD (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27) +#define PC28_BIN_UART3_CTS (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28) +#define PC29_AOUT_UART3_RTS (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29) +#define PC30_BIN_UART3_TX (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30) +#define PC31_AOUT_UART3_RX (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) +#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6) +#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) +#define PD7_AF_UART2_DTR (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7) +#define PD7_AIN_SPI2_SCLK (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7) +#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) +#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8) +#define PD8_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8) +#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) +#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9) +#define PD9_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9) +#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10) +#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10) +#define PD10_AIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10) +#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11) +#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12) +#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13) +#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14) +#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15) +#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16) +#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) +#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) +#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19) +#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20) +#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21) +#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22) +#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23) +#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24) +#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) +#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) +#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) +#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) +#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) +#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30) +#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) +#define PD31_BIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31) +#endif + +#ifdef CONFIG_ARCH_MX2 +#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5) +#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6) +#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7) +#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8) +#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9) +#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10) +#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11) +#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12) +#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13) +#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14) +#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) +#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) +#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17) +#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18) +#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19) +#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20) +#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21) +#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22) +#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23) +#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24) +#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25) +#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26) +#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27) +#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28) +#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29) +#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30) +#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31) +#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10) +#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10) +#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11) +#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11) +#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12) +#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12) +#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13) +#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13) +#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14) +#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15) +#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16) +#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17) +#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18) +#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18) +#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19) +#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19) +#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20) +#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20) +#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21) +#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21) +#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26) +#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28) +#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29) +#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31) +#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) +#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6) +#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16) +#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17) +#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18) +#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19) +#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20) +#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21) +#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22) +#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23) +#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24) +#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25) +#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26) +#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27) +#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28) +#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29) +#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30) +#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31) +#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0) +#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1) +#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2) +#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3) +#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4) +#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5) +#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6) +#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7) +#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8) +#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9) +#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10) +#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11) +#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12) +#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13) +#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14) +#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15) +#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16) +#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) +#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) +#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) +#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) +#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) +#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) +#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) +#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30) +#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31) +#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23) +#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3) +#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4) +#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6) +#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7) +#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8) +#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9) +#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10) +#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11) +#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) +#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) +#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) +#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) +#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18) +#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21) +#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22) +#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23) +#endif + +/* decode irq number to use with IMR(x), ISR(x) and friends */ +#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5) + +#define IRQ_GPIOA(x) (MXC_MAX_INT_LINES + x) +#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) +#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) +#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) + +#endif /* _MXC_GPIO_MX1_MX2_H */ -- cgit v1.2.3 From 32dc80c9cb13a7ce686bcc26efcf39e35719b466 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:56 +0200 Subject: i.MX2 family: Add basic mach support (headers) This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/hardware.h | 3 ++ include/asm-arm/arch-mxc/iim.h | 77 +++++++++++++++++++++++++++++++++++++ 2 files changed, 80 insertions(+) create mode 100644 include/asm-arm/arch-mxc/iim.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index 4ed2d8072d0..f841127ef75 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -26,6 +26,9 @@ # include #endif +#ifdef CONFIG_ARCH_MX2 +#endif + #include #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/iim.h b/include/asm-arm/arch-mxc/iim.h new file mode 100644 index 00000000000..315bffadafd --- /dev/null +++ b/include/asm-arm/arch-mxc/iim.h @@ -0,0 +1,77 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_IIM_H__ +#define __ASM_ARCH_MXC_IIM_H__ + +/* Register offsets */ +#define MXC_IIMSTAT 0x0000 +#define MXC_IIMSTATM 0x0004 +#define MXC_IIMERR 0x0008 +#define MXC_IIMEMASK 0x000C +#define MXC_IIMFCTL 0x0010 +#define MXC_IIMUA 0x0014 +#define MXC_IIMLA 0x0018 +#define MXC_IIMSDAT 0x001C +#define MXC_IIMPREV 0x0020 +#define MXC_IIMSREV 0x0024 +#define MXC_IIMPRG_P 0x0028 +#define MXC_IIMSCS0 0x002C +#define MXC_IIMSCS1 0x0030 +#define MXC_IIMSCS2 0x0034 +#define MXC_IIMSCS3 0x0038 +#define MXC_IIMFBAC0 0x0800 +#define MXC_IIMJAC 0x0804 +#define MXC_IIMHWV1 0x0808 +#define MXC_IIMHWV2 0x080C +#define MXC_IIMHAB0 0x0810 +#define MXC_IIMHAB1 0x0814 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMMAC 0x0814 +#define MXC_IIMPREV_FUSE 0x0818 +#define MXC_IIMSREV_FUSE 0x081C +#define MXC_IIMSJC_CHALL_0 0x0820 +#define MXC_IIMSJC_CHALL_7 0x083C +#define MXC_IIMFB0UC17 0x0840 +#define MXC_IIMFB0UC255 0x0BFC +#define MXC_IIMFBAC1 0x0C00 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMSUID 0x0C04 +#define MXC_IIMKEY0 0x0C04 +#define MXC_IIMKEY20 0x0C54 +#define MXC_IIMSJC_RESP_0 0x0C58 +#define MXC_IIMSJC_RESP_7 0x0C74 +#define MXC_IIMFB1UC30 0x0C78 +#define MXC_IIMFB1UC255 0x0FFC + +/* Bit definitions */ + +#define MXC_IIMHWV1_WLOCK (0x1 << 7) +#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6) +#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5) +#define MXC_IIMHWV1_BOOT_INT (0x1 << 4) +#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3) +#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2) +#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1) + +#define MXC_IIMHWV2_WLOCK (0x1 << 7) +#define MXC_IIMHWV2_BP_SDMA (0x1 << 6) +#define MXC_IIMHWV2_SCM_DCM (0x1 << 5) + +#endif /* __ASM_ARCH_MXC_IIM_H__ */ -- cgit v1.2.3 From f31405cc4cc568baad28273c7f45b0563b57a17d Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:59 +0200 Subject: i.MX27 CPU: Add basic i.MX27 CPU support Add basic i.MX27 CPU support Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/hardware.h | 3 + include/asm-arm/arch-mxc/mx27.h | 302 ++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/mxc.h | 4 + 3 files changed, 309 insertions(+) create mode 100644 include/asm-arm/arch-mxc/mx27.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index f841127ef75..37cddbaaade 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -27,6 +27,9 @@ #endif #ifdef CONFIG_ARCH_MX2 +# ifdef CONFIG_MACH_MX27 +# include +# endif #endif #include diff --git a/include/asm-arm/arch-mxc/mx27.h b/include/asm-arm/arch-mxc/mx27.h new file mode 100644 index 00000000000..212ecc24662 --- /dev/null +++ b/include/asm-arm/arch-mxc/mx27.h @@ -0,0 +1,302 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_MX27_H__ +#define __ASM_ARCH_MXC_MX27_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +/* IRAM */ +#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ + +/* Register offests */ +#define AIPI_BASE_ADDR 0x10000000 +#define AIPI_BASE_ADDR_VIRT 0xF4000000 +#define AIPI_SIZE SZ_1M + +#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) +#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) +#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) +#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) +#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) +#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) +#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) +#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) +#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) +#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) +#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) +#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) +#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) +#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) +#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) +#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) +#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) +#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) +#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) +#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) +#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) +#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) + +#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) +#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000) +#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000) +#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000) +#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000) +#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000) +#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000) +#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000) +#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000) + +#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) +#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) +#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000) +#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) +/* for mx27*/ +#define OTG_BASE_ADDR USBOTG_BASE_ADDR +#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000) +#define EMMA_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) +#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) +#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) +#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000) + +#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000) +#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000) +#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000) +#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000) +#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000) + +#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) +#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) + +/* ROMP and AVIC */ +#define ROMP_BASE_ADDR 0x10041000 + +#define AVIC_BASE_ADDR 0x10040000 + +#define SAHB1_BASE_ADDR 0x80000000 +#define SAHB1_BASE_ADDR_VIRT 0xF4100000 +#define SAHB1_SIZE SZ_1M + +#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) +#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000) + +/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ +#define X_MEMC_BASE_ADDR 0xD8000000 +#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 +#define X_MEMC_SIZE SZ_1M + +#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) +#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) +#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) +#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) +#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) + +/* Memory regions and CS */ +#define SDRAM_BASE_ADDR 0xA0000000 +#define CSD1_BASE_ADDR 0xB0000000 + +#define CS0_BASE_ADDR 0xC0000000 +#define CS1_BASE_ADDR 0xC8000000 +#define CS2_BASE_ADDR 0xD0000000 +#define CS3_BASE_ADDR 0xD2000000 +#define CS4_BASE_ADDR 0xD4000000 +#define CS5_BASE_ADDR 0xD6000000 +#define PCMCIA_MEM_BASE_ADDR 0xDC000000 + +/* + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ +#define IO_ADDRESS(x) \ + (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ + AIPI_IO_ADDRESS(x) : \ + ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ + SAHB1_IO_ADDRESS(x) : \ + ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ + X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) + +/* define the address mapping macros: in physical address order */ +#define AIPI_IO_ADDRESS(x) \ + (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) + +#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) + +#define SAHB1_IO_ADDRESS(x) \ + (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) + +#define CS4_IO_ADDRESS(x) \ + (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) + +#define X_MEMC_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +#define PCMCIA_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +/* fixed interrput numbers */ +#define MXC_INT_CCM 63 +#define MXC_INT_IIM 62 +#define MXC_INT_LCDC 61 +#define MXC_INT_SLCDC 60 +#define MXC_INT_SAHARA 59 +#define MXC_INT_SCC_SCM 58 +#define MXC_INT_SCC_SMN 57 +#define MXC_INT_USB3 56 +#define MXC_INT_USB2 55 +#define MXC_INT_USB1 54 +#define MXC_INT_VPU 53 +#define MXC_INT_EMMAPP 52 +#define MXC_INT_EMMAPRP 51 +#define MXC_INT_FEC 50 +#define MXC_INT_UART5 49 +#define MXC_INT_UART6 48 +#define MXC_INT_DMACH15 47 +#define MXC_INT_DMACH14 46 +#define MXC_INT_DMACH13 45 +#define MXC_INT_DMACH12 44 +#define MXC_INT_DMACH11 43 +#define MXC_INT_DMACH10 42 +#define MXC_INT_DMACH9 41 +#define MXC_INT_DMACH8 40 +#define MXC_INT_DMACH7 39 +#define MXC_INT_DMACH6 38 +#define MXC_INT_DMACH5 37 +#define MXC_INT_DMACH4 36 +#define MXC_INT_DMACH3 35 +#define MXC_INT_DMACH2 34 +#define MXC_INT_DMACH1 33 +#define MXC_INT_DMACH0 32 +#define MXC_INT_CSI 31 +#define MXC_INT_ATA 30 +#define MXC_INT_NANDFC 29 +#define MXC_INT_PCMCIA 28 +#define MXC_INT_WDOG 27 +#define MXC_INT_GPT1 26 +#define MXC_INT_GPT2 25 +#define MXC_INT_GPT3 24 +#define MXC_INT_GPT INT_GPT1 +#define MXC_INT_PWM 23 +#define MXC_INT_RTC 22 +#define MXC_INT_KPP 21 +#define MXC_INT_UART1 20 +#define MXC_INT_UART2 19 +#define MXC_INT_UART3 18 +#define MXC_INT_UART4 17 +#define MXC_INT_CSPI1 16 +#define MXC_INT_CSPI2 15 +#define MXC_INT_SSI1 14 +#define MXC_INT_SSI2 13 +#define MXC_INT_I2C 12 +#define MXC_INT_SDHC1 11 +#define MXC_INT_SDHC2 10 +#define MXC_INT_SDHC3 9 +#define MXC_INT_GPIO 8 +#define MXC_INT_SDHC 7 +#define MXC_INT_CSPI3 6 +#define MXC_INT_RTIC 5 +#define MXC_INT_GPT4 4 +#define MXC_INT_GPT5 3 +#define MXC_INT_GPT6 2 +#define MXC_INT_I2C2 1 + +/* fixed DMA request numbers */ +#define DMA_REQ_NFC 37 +#define DMA_REQ_SDHC3 36 +#define DMA_REQ_UART6_RX 35 +#define DMA_REQ_UART6_TX 34 +#define DMA_REQ_UART5_RX 33 +#define DMA_REQ_UART5_TX 32 +#define DMA_REQ_CSI_RX 31 +#define DMA_REQ_CSI_STAT 30 +#define DMA_REQ_ATA_RCV 29 +#define DMA_REQ_ATA_TX 28 +#define DMA_REQ_UART1_TX 27 +#define DMA_REQ_UART1_RX 26 +#define DMA_REQ_UART2_TX 25 +#define DMA_REQ_UART2_RX 24 +#define DMA_REQ_UART3_TX 23 +#define DMA_REQ_UART3_RX 22 +#define DMA_REQ_UART4_TX 21 +#define DMA_REQ_UART4_RX 20 +#define DMA_REQ_CSPI1_TX 19 +#define DMA_REQ_CSPI1_RX 18 +#define DMA_REQ_CSPI2_TX 17 +#define DMA_REQ_CSPI2_RX 16 +#define DMA_REQ_SSI1_TX1 15 +#define DMA_REQ_SSI1_RX1 14 +#define DMA_REQ_SSI1_TX0 13 +#define DMA_REQ_SSI1_RX0 12 +#define DMA_REQ_SSI2_TX1 11 +#define DMA_REQ_SSI2_RX1 10 +#define DMA_REQ_SSI2_TX0 9 +#define DMA_REQ_SSI2_RX0 8 +#define DMA_REQ_SDHC1 7 +#define DMA_REQ_SDHC2 6 +#define DMA_REQ_MSHC 4 +#define DMA_REQ_EXT 3 +#define DMA_REQ_CSPI3_TX 2 +#define DMA_REQ_CSPI3_RX 1 + +/* silicon revisions specific to i.MX27 */ +#define CHIP_REV_1_0 0x00 +#define CHIP_REV_2_0 0x01 + +#ifndef __ASSEMBLY__ +extern int mx27_revision(void); +#endif + +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x1C +#define GPIO_GDIR 0x00 +#define GPIO_PSR 0x24 +#define GPIO_ICR1 0x28 +#define GPIO_ICR2 0x2C +#define GPIO_IMR 0x30 +#define GPIO_ISR 0x34 +#define GPIO_INT_LOW_LEV 0x3 +#define GPIO_INT_HIGH_LEV 0x2 +#define GPIO_INT_RISE_EDGE 0x0 +#define GPIO_INT_FALL_EDGE 0x1 +#define GPIO_INT_NONE 0x4 + +/* Mandatory defines used globally */ + +/* this is an i.MX27 CPU */ +#define cpu_is_mx27() (1) + +/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ +#define ARCH_NR_GPIOS (192 + 16) + +/* OS clock tick rate */ +#define CLOCK_TICK_RATE 13300000 + +/* Start of RAM */ +#define PHYS_OFFSET SDRAM_BASE_ADDR + +/* max interrupt lines count */ +#define NR_IRQS 256 + +/* count of internal interrupt sources */ +#define MXC_MAX_INT_LINES 64 + +#endif /* __ASM_ARCH_MXC_MX27_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 3e1c4ded18e..332eda4dbd3 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -29,4 +29,8 @@ # define cpu_is_mx31() (0) #endif +#ifndef CONFIG_MACH_MX27 +# define cpu_is_mx27() (0) +#endif + #endif /* __ASM_ARCH_MXC_H__ */ -- cgit v1.2.3 From 80eedae6f0322dafc749140b67986b2472473745 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:00 +0200 Subject: i.MX27: Add ADS platform support This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/board-mx27ads.h | 354 +++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/debug-macro.S | 4 +- 2 files changed, 357 insertions(+), 1 deletion(-) create mode 100644 include/asm-arm/arch-mxc/board-mx27ads.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/include/asm-arm/arch-mxc/board-mx27ads.h new file mode 100644 index 00000000000..61e66dac90e --- /dev/null +++ b/include/asm-arm/arch-mxc/board-mx27ads.h @@ -0,0 +1,354 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ +#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ + +/* external interrupt multiplexer */ +#define MXC_EXP_IO_BASE (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES) + +#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) +#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE +#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) +#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) + +#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ + MXC_MAX_VIRTUAL_INTS) + +/* + * MXC UART EVB board level configurations + */ + +#define MXC_LL_EXTUART_PADDR (CS4_BASE_ADDR + 0x20000) +#define MXC_LL_EXTUART_VADDR (CS4_BASE_ADDR_VIRT + 0x20000) +#define MXC_LL_EXTUART_16BIT_BUS + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) + +/* + * @name Memory Size parameters + */ + +/* + * Size of SDRAM memory + */ +#define SDRAM_MEM_SIZE SZ_128M + +/* + * PBC Controller parameters + */ + +/* + * Base address of PBC controller, CS4 + */ +#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset)) + +/* + * PBC Interupt name definitions + */ +#define PBC_GPIO1_0 0 +#define PBC_GPIO1_1 1 +#define PBC_GPIO1_2 2 +#define PBC_GPIO1_3 3 +#define PBC_GPIO1_4 4 +#define PBC_GPIO1_5 5 + +#define PBC_INTR_MAX_NUM 6 +#define PBC_INTR_SHARED_MAX_NUM 8 + +/* When the PBC address connection is fixed in h/w, defined as 1 */ +#define PBC_ADDR_SH 0 + +/* Offsets for the PBC Controller register */ +/* + * PBC Board version register offset + */ +#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 set address. + */ +#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 clear address. + */ +#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) +/* + * PBC Board control register 2 set address. + */ +#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) +/* + * PBC Board control register 2 clear address. + */ +#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) +/* + * PBC Board control register 3 set address. + */ +#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) +/* + * PBC Board control register 3 clear address. + */ +#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) +/* + * PBC Board control register 3 set address. + */ +#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) +/* + * PBC Board control register 4 clear address. + */ +#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) +/*PBC_ADDR_SH + * PBC Board status register 1. + */ +#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) +/* + * PBC Board interrupt status register. + */ +#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) +/* + * PBC Board interrupt current status register. + */ +#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) +/* + * PBC Interrupt mask register set address. + */ +#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) +/* + * PBC Interrupt mask register clear address. + */ +#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) +/* + * External UART A. + */ +#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) +/* + * UART 4 Expanding Signal Status. + */ +#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) +/* + * UART 4 Expanding Signal Control Set. + */ +#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) +/* + * UART 4 Expanding Signal Control Clear. + */ +#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) +/* + * Ethernet Controller IO base address. + */ +#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) +/* + * Ethernet Controller Memory base address. + */ +#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) +/* + * Ethernet Controller DMA base address. + */ +#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) + +/* PBC Board Version Register bit definition */ +#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ +#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ + +/* PBC Board Control Register 1 bit definitions */ +#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ +#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ +#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ +#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ +#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ + +/* PBC Board Control Register 2 bit definitions */ +#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ +#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ +#define PBC_BCTRL2_ATAFEC_EN 0X0010 +#define PBC_BCTRL2_ATAFEC_SEL 0X0020 +#define PBC_BCTRL2_ATA_EN 0X0040 +#define PBC_BCTRL2_IRDA_SD 0X0080 +#define PBC_BCTRL2_IRDA_EN 0X0100 +#define PBC_BCTRL2_CCTL10 0X0200 +#define PBC_BCTRL2_CCTL11 0X0400 + +/* PBC Board Control Register 3 bit definitions */ +#define PBC_BCTRL3_HSH_EN 0X0020 +#define PBC_BCTRL3_FSH_MOD 0X0040 +#define PBC_BCTRL3_OTG_HS_EN 0X0080 +#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 +#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 +#define PBC_BCTRL3_USB_OTG_ON 0X0800 +#define PBC_BCTRL3_USB_FSH_ON 0X1000 + +/* PBC Board Control Register 4 bit definitions */ +#define PBC_BCTRL4_REGEN_SEL 0X0001 +#define PBC_BCTRL4_USER_OFF 0X0002 +#define PBC_BCTRL4_VIB_EN 0X0004 +#define PBC_BCTRL4_PWRGT1_EN 0X0008 +#define PBC_BCTRL4_PWRGT2_EN 0X0010 +#define PBC_BCTRL4_STDBY_PRI 0X0020 + +#ifndef __ASSEMBLY__ +/* + * Enumerations for SD cards and memory stick card. This corresponds to + * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. + */ +enum mxc_card_no { + MXC_CARD_SD2 = 0, + MXC_CARD_SD3, + MXC_CARD_MS, + MXC_CARD_SD1, + MXC_CARD_MIN = MXC_CARD_SD2, + MXC_CARD_MAX = MXC_CARD_SD1, +}; +#endif + +#define MXC_CPLD_VER_1_50 0x01 + +/* + * PBC BSTAT Register bit definitions + */ +#define PBC_BSTAT_PRI_INT 0X0001 +#define PBC_BSTAT_USB_BYP 0X0002 +#define PBC_BSTAT_ATA_IOCS16 0X0004 +#define PBC_BSTAT_ATA_CBLID 0X0008 +#define PBC_BSTAT_ATA_DASP 0X0010 +#define PBC_BSTAT_PWR_RDY 0X0020 +#define PBC_BSTAT_SD3_WP 0X0100 +#define PBC_BSTAT_SD2_WP 0X0200 +#define PBC_BSTAT_SD1_WP 0X0400 +#define PBC_BSTAT_SD3_DET 0X0800 +#define PBC_BSTAT_SD2_DET 0X1000 +#define PBC_BSTAT_SD1_DET 0X2000 +#define PBC_BSTAT_MS_DET 0X4000 +#define PBC_BSTAT_SD3_DET_BIT 11 +#define PBC_BSTAT_SD2_DET_BIT 12 +#define PBC_BSTAT_SD1_DET_BIT 13 +#define PBC_BSTAT_MS_DET_BIT 14 +#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ + ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ + ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ + ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ + 0x0)))) + +/* + * PBC UART Control Register bit definitions + */ +#define PBC_UCTRL_DCE_DCD 0X0001 +#define PBC_UCTRL_DCE_DSR 0X0002 +#define PBC_UCTRL_DCE_RI 0X0004 +#define PBC_UCTRL_DTE_DTR 0X0100 + +/* + * PBC UART Status Register bit definitions + */ +#define PBC_USTAT_DTE_DCD 0X0001 +#define PBC_USTAT_DTE_DSR 0X0002 +#define PBC_USTAT_DTE_RI 0X0004 +#define PBC_USTAT_DCE_DTR 0X0100 + +/* + * PBC Interupt mask register bit definitions + */ +#define PBC_INTR_SD3_R_EN_BIT 4 +#define PBC_INTR_SD2_R_EN_BIT 0 +#define PBC_INTR_SD1_R_EN_BIT 6 +#define PBC_INTR_MS_R_EN_BIT 5 +#define PBC_INTR_SD3_EN_BIT 13 +#define PBC_INTR_SD2_EN_BIT 12 +#define PBC_INTR_MS_EN_BIT 14 +#define PBC_INTR_SD1_EN_BIT 15 + +#define PBC_INTR_SD2_R_EN 0x0001 +#define PBC_INTR_LOW_BAT 0X0002 +#define PBC_INTR_OTG_FSOVER 0X0004 +#define PBC_INTR_FSH_OVER 0X0008 +#define PBC_INTR_SD3_R_EN 0x0010 +#define PBC_INTR_MS_R_EN 0x0020 +#define PBC_INTR_SD1_R_EN 0x0040 +#define PBC_INTR_FEC_INT 0X0080 +#define PBC_INTR_ENET_INT 0X0100 +#define PBC_INTR_OTGFS_INT 0X0200 +#define PBC_INTR_XUART_INT 0X0400 +#define PBC_INTR_CCTL12 0X0800 +#define PBC_INTR_SD2_EN 0x1000 +#define PBC_INTR_SD3_EN 0x2000 +#define PBC_INTR_MS_EN 0x4000 +#define PBC_INTR_SD1_EN 0x8000 + + + +/* For interrupts like xuart, enet etc */ +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) +#define MXC_MAX_EXP_IO_LINES 16 + +/* + * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. + * + */ +#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) +#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) +#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) +#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) +#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) +#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) +#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) +#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) +#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) +#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) +#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) +#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) +#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) +#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) + +/* + * This is System IRQ used by CS8900A for interrupt generation + * taken from platform.h + */ +#define CS8900AIRQ EXPIO_INT_ENET_INT +/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ +#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) + +#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) + +/* +* This is used to detect if the CPLD version is for mx27 evb board rev-a +*/ +#define PBC_CPLD_VERSION_IS_REVA() \ + ((__raw_readw(PBC_VERSION_REG) & \ + (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ + == 0) + +/* This is used to active or inactive ata signal in CPLD . + * It is dependent with hardware + */ +#define PBC_ATA_SIGNAL_ACTIVE() \ + __raw_writew( \ + PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ + PBC_BCTRL2_CLEAR_REG) + +#define PBC_ATA_SIGNAL_INACTIVE() \ + __raw_writew( \ + PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ + PBC_BCTRL2_SET_REG) + +#define MXC_BD_LED1 (1 << 5) +#define MXC_BD_LED2 (1 << 6) +#define MXC_BD_LED_ON(led) \ + __raw_writew(led, PBC_BCTRL1_SET_REG) +#define MXC_BD_LED_OFF(led) \ + __raw_writew(led, PBC_BCTRL1_CLEAR_REG) + +/* to determine the correct external crystal reference */ +#define CKIH_27MHZ_BIT_SET (1 << 3) + +#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index 5add48b6665..c6c56805143 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -22,7 +22,9 @@ #ifdef CONFIG_MACH_MX31LITE #include #endif - +#ifdef CONFIG_MACH_MX27ADS +#include +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? -- cgit v1.2.3 From 7e5e9f5457f5cd019fd7e2f3da94e9fc72cc9ff6 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:00 +0200 Subject: i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/board-pcm038.h | 36 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/debug-macro.S | 3 +++ 2 files changed, 39 insertions(+) create mode 100644 include/asm-arm/arch-mxc/board-pcm038.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h new file mode 100644 index 00000000000..300467e8db6 --- /dev/null +++ b/include/asm-arm/arch-mxc/board-pcm038.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ +#define __ASM_ARCH_MXC_BOARD_PCM038_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) + +#ifndef __ASSEMBLY__ +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + * TODO: Add your own baseboard init function and call it from + * inside pcm038_init(). + */ +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index c6c56805143..575087f8561 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -24,6 +24,9 @@ #endif #ifdef CONFIG_MACH_MX27ADS #include +#endif +#ifdef CONFIG_MACH_PCM038 +#include #endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 -- cgit v1.2.3 From ff6552e4f3505da9c2886098773146be71c872e3 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:01 +0200 Subject: i.MX27 family: Add the Phytec PCM970 evaluation board The Phytec phyCORE-i.MX27 CPU module is delivered with the PCM970 baseboard by default. This patch adds support for the hardware. This code is only an empty stub; it is filled up with functionality in a later patch series. Signed-off-by: Juergen Beisert --- include/asm-arm/arch-mxc/board-pcm038.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h index 300467e8db6..750c62afd90 100644 --- a/include/asm-arm/arch-mxc/board-pcm038.h +++ b/include/asm-arm/arch-mxc/board-pcm038.h @@ -30,7 +30,12 @@ * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from * inside pcm038_init(). + * + * This example here is for the development board. Refer pcm970-baseboard.c */ + +extern void pcm970_baseboard_init(void); + #endif #endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ -- cgit v1.2.3 From 75f10b465af9efd59906e9079ed9cbda7e0f7a43 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 22 May 2008 16:20:18 +0100 Subject: [ARM] 5047/2: Support resetting by asserting GPIO pin This adds support for resetting via assertion of GPIO pin. This e.g. is used on Sharp Zaurus SL-6000. Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/hardware.h | 5 +++++ include/asm-arm/arch-pxa/system.h | 17 +---------------- 2 files changed, 6 insertions(+), 16 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index e25558faa5a..5547ec797ad 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -205,6 +205,11 @@ static inline void __deprecated pxa_set_cken(int clock, int enable) */ extern unsigned int get_memclk_frequency_10khz(void); +/* + * register GPIO as reset generator + */ +extern int init_gpio_reset(int gpio); + #endif #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index 9aa6c2e939e..14894ae3fa6 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -20,19 +20,4 @@ static inline void arch_idle(void) } -static inline void arch_reset(char mode) -{ - if (cpu_is_pxa2xx()) - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Initialize the watchdog and let it fire */ - OWER = OWER_WME; - OSSR = OSSR_M3; - OSMR3 = OSCR + 368640; /* ... in 100 ms */ - } -} - +void arch_reset(char mode); -- cgit v1.2.3 From b032fccca80cbbedaa80e5a72a202a43f08aa97e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 12 Jun 2008 11:42:07 +0100 Subject: [ARM] 5083/2: Tosa: fix IrDA transciver powerup. On tosa the tranciver LED isn't powered down if the GPIO47 (STUART_TX) isn't configured as low-level. Power it down if IrDA is off to save a bit of power. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- include/asm-arm/arch-pxa/tosa.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c5b6fde6907..18822621615 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -99,6 +99,7 @@ #define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ #define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ #define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_IRDA_TX (47) #define TOSA_GPIO_TG_SPI_SCLK (81) #define TOSA_GPIO_TG_SPI_CS (82) #define TOSA_GPIO_TG_SPI_MOSI (83) -- cgit v1.2.3 From bf0116e54e185fd63025f2b975f0f1616ffe41f1 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 14 Jun 2008 11:42:02 +0100 Subject: [ARM] 5097/1: Tosa: support TC6393XB device Add definitions for Toshiba TC6393XB companion chip and register the tc6393xb device. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- include/asm-arm/arch-pxa/irqs.h | 1 + include/asm-arm/arch-pxa/tosa.h | 44 ++++++++++++++++++++++++++++------------- 2 files changed, 31 insertions(+), 14 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index b6c8fe37768..fa05e76f64e 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -180,6 +180,7 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ + defined(CONFIG_MACH_TOSA) || \ defined(CONFIG_MACH_MAINSTONE) || \ defined(CONFIG_MACH_PCM027) || \ defined(CONFIG_MACH_MAGICIAN) diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index 18822621615..a16c103b725 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -25,7 +25,7 @@ */ #define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 -#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 +#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) #define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) #define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) @@ -35,11 +35,9 @@ #define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ +#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ TOSA_SCOOP_AUD_PWR_ON |\ - TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) -/* GPIO out put level when init 1: Hi */ -#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) + TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN) /* * SCOOP2 jacket GPIOs @@ -49,16 +47,34 @@ #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) #define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) -#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 -#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 +#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4) +#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 #define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( \ - TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ - TOSA_SCOOP_JC_CARD_LIMIT_SEL ) +#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) + +/* + * TC6393XB GPIOs + */ +#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) +#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) + +#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) +#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) +#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) +#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) +#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) +#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) +#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) +#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) +#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) +#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) +#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) +#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) /* * Timing Generator @@ -84,13 +100,13 @@ #define TOSA_GPIO_JACKET_DETECT (7) #define TOSA_GPIO_nSD_DETECT (9) #define TOSA_GPIO_nSD_INT (10) -#define TOSA_GPIO_TC6393_CLK (11) +#define TOSA_GPIO_TC6393XB_CLK (11) #define TOSA_GPIO_BAT1_CRG (12) #define TOSA_GPIO_CF_CD (13) #define TOSA_GPIO_BAT0_CRG (14) -#define TOSA_GPIO_TC6393_INT (15) +#define TOSA_GPIO_TC6393XB_INT (15) #define TOSA_GPIO_BAT0_LOW (17) -#define TOSA_GPIO_TC6393_RDY (18) +#define TOSA_GPIO_TC6393XB_RDY (18) #define TOSA_GPIO_ON_RESET (19) #define TOSA_GPIO_EAR_IN (20) #define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ @@ -138,7 +154,7 @@ #define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) #define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) #define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) +#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) #define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) #define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) #define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) -- cgit v1.2.3 From 16b32fd0a35b30cbd67395cfcbd360354db44f39 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 5 Jul 2008 09:02:48 +0100 Subject: [ARM] 5150/1: Tosa: support built-in bluetooth power-up The driver is pretty much generic and will be later shared with a few other devices, like hx4700 ipaq. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- include/asm-arm/arch-pxa/tosa.h | 7 +++---- include/asm-arm/arch-pxa/tosa_bt.h | 22 ++++++++++++++++++++++ 2 files changed, 25 insertions(+), 4 deletions(-) create mode 100644 include/asm-arm/arch-pxa/tosa_bt.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index a16c103b725..a72803f0461 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -30,14 +30,13 @@ #define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) #define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) #define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 -#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 -#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 +#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6) +#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7) #define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ #define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ - TOSA_SCOOP_AUD_PWR_ON |\ - TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN) + TOSA_SCOOP_AUD_PWR_ON) /* * SCOOP2 jacket GPIOs diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h new file mode 100644 index 00000000000..efc3c3d3b75 --- /dev/null +++ b/include/asm-arm/arch-pxa/tosa_bt.h @@ -0,0 +1,22 @@ +/* + * Tosa bluetooth built-in chip control. + * + * Later it may be shared with some other platforms. + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef TOSA_BT_H +#define TOSA_BT_H + +struct tosa_bt_data { + int gpio_pwr; + int gpio_reset; +}; + +#endif + -- cgit v1.2.3 From 5e329d1c7f5fe6adfee99c783fa98bda7dae8ac5 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 6 Jun 2008 10:12:37 +0100 Subject: [ARM] 5079/1: Warn people when using pxa2xx-gpio.h Warn people when using pxa2xx-gpio.h as it is only here for backwards compatibility. The new mfp-pxa2[57]x.h and the relevant API should be used instead. Signed-off-by: Stefan Schmidt Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa2xx-gpio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h index 763313c5e6b..a6e60f69161 100644 --- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARCH_PXA2XX_GPIO_H #define __ASM_ARCH_PXA2XX_GPIO_H +#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ -- cgit v1.2.3 From ff7b04796d9866327ea76e1393f1e902ef032f84 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Tue, 8 Jul 2008 11:58:36 -0700 Subject: dmaengine: DMA engine driver for Marvell XOR engine The XOR engine found in Marvell's SoCs and system controllers provides XOR and DMA operation, iSCSI CRC32C calculation, memory initialization, and memory ECC error cleanup operation support. This driver implements the DMA engine API and supports the following capabilities: - memcpy - xor - memset The XOR engine can be used by DMA engine clients implemented in the kernel, one of those clients is the RAID module. In that case, I observed 20% improvement in the raid5 write throughput, and 40% decrease in the CPU utilization when doing array construction, those results obtained on an 5182 running at 500Mhz. When enabling the NET DMA client, the performance decreased, so meanwhile it is recommended to keep this client off. Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- include/asm-arm/plat-orion/mv_xor.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 include/asm-arm/plat-orion/mv_xor.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-orion/mv_xor.h b/include/asm-arm/plat-orion/mv_xor.h new file mode 100644 index 00000000000..c349e8ff5cc --- /dev/null +++ b/include/asm-arm/plat-orion/mv_xor.h @@ -0,0 +1,28 @@ +/* + * Marvell XOR platform device data definition file. + */ + +#ifndef __ASM_PLAT_ORION_MV_XOR_H +#define __ASM_PLAT_ORION_MV_XOR_H + +#include +#include + +#define MV_XOR_SHARED_NAME "mv_xor_shared" +#define MV_XOR_NAME "mv_xor" + +struct mbus_dram_target_info; + +struct mv_xor_platform_shared_data { + struct mbus_dram_target_info *dram; +}; + +struct mv_xor_platform_data { + struct platform_device *shared; + int hw_id; + dma_cap_mask_t cap_mask; + size_t pool_size; +}; + + +#endif -- cgit v1.2.3 From 66a7f72d9892013e9ea663260f407758989ff510 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 2 Jun 2008 16:10:20 +0100 Subject: [ARM] pxa: remove pxa_set_cken() pxa_set_cken() is now unused, remove it. Signed-off-by: Russell King --- include/asm-arm/arch-pxa/hardware.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index e25558faa5a..d9af6dabc89 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -191,15 +191,6 @@ extern int pxa_gpio_get_value(unsigned gpio); */ extern void pxa_gpio_set_value(unsigned gpio, int value); -/* - * Routine to enable or disable CKEN - */ -static inline void __deprecated pxa_set_cken(int clock, int enable) -{ - extern void __pxa_set_cken(int clock, int enable); - __pxa_set_cken(clock, enable); -} - /* * return current memory and LCD clock frequency in units of 10kHz */ -- cgit v1.2.3 From 918dbcba4ee3f0ad7d617b3969d5016481b9ceff Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 2 Jul 2008 13:53:45 +0100 Subject: [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state Provide a set of functions to control state of pins dedicated to IrDA. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- include/asm-arm/arch-pxa/irda.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h index 99f4f423a8e..0a50c3c763d 100644 --- a/include/asm-arm/arch-pxa/irda.h +++ b/include/asm-arm/arch-pxa/irda.h @@ -16,4 +16,8 @@ struct pxaficp_platform_data { extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +void pxa2xx_transceiver_mode(struct device *dev, int mode); +#endif + #endif -- cgit v1.2.3 From 9f19d6382854d6b2d58cc364253779479e14facc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 10 Jun 2008 12:30:05 +0100 Subject: [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As well as moving all the device declarations to a single one in devices.c this causes all platforms to register the I/O and interrupt resources for the AC97 controller. Cc: eric miao Cc: Mike Rapoport Cc: Lennert Buytenhek Cc: Jürgen Schindele Cc: Juergen Beisert Signed-off-by: Mark Brown Signed-off-by: Russell King --- include/asm-arm/arch-pxa/audio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h index 52bbe3bc25e..f82f96dd105 100644 --- a/include/asm-arm/arch-pxa/audio.h +++ b/include/asm-arm/arch-pxa/audio.h @@ -12,4 +12,6 @@ typedef struct { void *priv; } pxa2xx_audio_ops_t; +extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); + #endif -- cgit v1.2.3 From e172274ccc55d20536fbdceb6131f38e288541e0 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 13 Jun 2008 09:17:31 +0100 Subject: [ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi platform devices Add a function to dynamically allocate and register pxa2xx-spi platform devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and lubbock to use it. Signed-off-by: Guennadi Liakhovetski Acked-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa2xx_spi.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index 3459fb26ce9..2206cb61a9f 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -41,4 +41,6 @@ struct pxa2xx_spi_chip { void (*cs_control)(u32 command); }; +extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); + #endif /*PXA2XX_SPI_H_*/ -- cgit v1.2.3 From 839257c9a818c81a802fdd705602589355571662 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Tue, 17 Jun 2008 09:49:27 +0100 Subject: [ARM] 5106/1: CM-X270: remove unneeded cm-x270.h The include/asm-arm/arch-pxa/cm-x270.h is not used anymore. Remove it. Signed-off-by: Mike Rapoport Signed-off-by: Russell King --- include/asm-arm/arch-pxa/cm-x270.h | 50 -------------------------------------- 1 file changed, 50 deletions(-) delete mode 100644 include/asm-arm/arch-pxa/cm-x270.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h deleted file mode 100644 index f8fac9e1800..00000000000 --- a/include/asm-arm/arch-pxa/cm-x270.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm/arch-pxa/cm-x270.h - * - * Copyright Compulab Ltd., 2003, 2007 - * Mike Rapoport - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* CM-x270 device physical addresses */ -#define CMX270_CS1_PHYS (PXA_CS1_PHYS) -#define MARATHON_PHYS (PXA_CS2_PHYS) -#define CMX270_IDE104_PHYS (PXA_CS3_PHYS) -#define CMX270_IT8152_PHYS (PXA_CS4_PHYS) - -/* Statically mapped regions */ -#define CMX270_VIRT_BASE (0xe8000000) -#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) -#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + SZ_64M) - -/* GPIO related definitions */ -#define GPIO_IT8152_IRQ (22) - -#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) -#define PME_IRQ IRQ_GPIO(0) -#define CMX270_IDE_IRQ IRQ_GPIO(100) -#define CMX270_GPIRQ1 IRQ_GPIO(101) -#define CMX270_TOUCHIRQ IRQ_GPIO(96) -#define CMX270_ETHIRQ IRQ_GPIO(10) -#define CMX270_GFXIRQ IRQ_GPIO(95) -#define CMX270_NANDIRQ IRQ_GPIO(89) -#define CMX270_MMC_IRQ IRQ_GPIO(83) - -/* PCMCIA related definitions */ -#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x))) -#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(82 - (x))) - -#define PCMCIA_S0_CD_VALID IRQ_GPIO(84) -#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES - -#define PCMCIA_S1_CD_VALID IRQ_GPIO(83) -#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES - -#define PCMCIA_S0_RDYINT IRQ_GPIO(82) -#define PCMCIA_S1_RDYINT IRQ_GPIO(81) - -#define PCMCIA_RESET_GPIO 53 -- cgit v1.2.3 From 6d3dfe4a3141476a3cf59ce6d2d1c25f9b5cfae8 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 2 Jun 2008 15:58:03 +0800 Subject: [ARM] pxa: allow display of uncompress message through STUART Some boards use UART other than FFUART for the console, E.g. Marvell PXA3xx Form Factor Platform (aka Littleton) uses STUART. This patch modifies the uncompress.h so that display of the uncompress message is routed to the STUART. Signed-off-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/uncompress.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index dadf4c20b62..f4551269aaf 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -11,11 +11,11 @@ #include #include +#include -#define __REG(x) ((volatile unsigned long *)x) - -#define UART FFUART +#define __REG(x) ((volatile unsigned long *)x) +static volatile unsigned long *UART = FFUART; static inline void putc(char c) { @@ -33,8 +33,13 @@ static inline void flush(void) { } +static inline void arch_decomp_setup(void) +{ + if (machine_is_littleton()) + UART = STUART; +} + /* * nothing to do */ -#define arch_decomp_setup() #define arch_decomp_wdog() -- cgit v1.2.3 From 566b450c33ea43f339d54d445f4ea1ab2e021909 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 16 Jun 2008 09:47:47 +0800 Subject: [ARM] pxa: add pxa2xx_mfp_set_lpm() to facilitate low power state change Some boards want to change low power state of pins on-the-fly, this function helps to facilitate that operation instead of switching back-n-forth between two configurations with pxa2xx_mfp_config(). Signed-off-by: Eric Miao Tested-by: Robert Jarzmik Signed-off-by: Russell King --- include/asm-arm/arch-pxa/mfp-pxa2xx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h index db8d890d237..8de1c0dae62 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h +++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h @@ -128,5 +128,6 @@ #define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); +extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm); extern int gpio_set_wake(unsigned int gpio, unsigned int on); #endif /* __ASM_ARCH_MFP_PXA2XX_H */ -- cgit v1.2.3 From 9ae819a819b4dfc60ac13dd1f1e1a7eaa3d4a6cb Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 2 Jun 2008 15:22:03 +0800 Subject: [ARM] pxa: add pxa3xx NAND device and clock sources A pxa3xx_set_nand_info() is also introduced to set the PXA3xx NAND driver specific platform_data structure pointer. Signed-off-by: Eric Miao Cc: Sergey Podstavin Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa3xx_nand.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h index 81a8937486c..eb4b190b665 100644 --- a/include/asm-arm/arch-pxa/pxa3xx_nand.h +++ b/include/asm-arm/arch-pxa/pxa3xx_nand.h @@ -15,4 +15,6 @@ struct pxa3xx_nand_platform_data { struct mtd_partition *parts; unsigned int nr_parts; }; + +extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); #endif /* __ASM_ARCH_PXA3XX_NAND_H */ -- cgit v1.2.3 From a1f7fc48c143537e2bf70affee7e8932f5be9bb4 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 28 May 2008 10:44:16 +0800 Subject: [ARM] pxa: add GPIO expander (PCA9539) support for zylonite And also reserve 32 IRQs for the two GPIO expanders. Signed-off-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/irqs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index b6c8fe37768..d8573604846 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -184,6 +184,8 @@ defined(CONFIG_MACH_PCM027) || \ defined(CONFIG_MACH_MAGICIAN) #define NR_IRQS (IRQ_BOARD_END) +#elif defined(CONFIG_MACH_ZYLONITE) +#define NR_IRQS (IRQ_BOARD_START + 32) #else #define NR_IRQS (IRQ_BOARD_START) #endif -- cgit v1.2.3 From 5c9f50e90e8056fb5a8bdd479ab0591d5dad79a0 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 17 Jun 2008 19:03:54 +0800 Subject: [ARM] pxa: add simple gpio debug LEDs support for zylonite Signed-off-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/zylonite.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index de577de8d18..0d35ca04731 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -16,6 +16,8 @@ struct platform_mmc_slot { extern struct platform_mmc_slot zylonite_mmc_slot[]; extern int gpio_eth_irq; +extern int gpio_debug_led1; +extern int gpio_debug_led2; extern int wm9713_irq; -- cgit v1.2.3 From 63f385cd1f649b3f4f2d59fc609e051981215fd7 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Tue, 8 Jul 2008 23:07:48 +0100 Subject: [ARM] 5160/1: IOP3XX: gpio/gpiolib support This patch brings support for gpio/gpiolib framework to Intel IOP3xx platforms. Signed-off-by: Arnaud Patard Acked-by: Dan Williams Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/gpio.h | 6 +++ include/asm-arm/arch-iop33x/gpio.h | 6 +++ include/asm-arm/hardware/iop3xx-gpio.h | 73 ++++++++++++++++++++++++++++++++++ 3 files changed, 85 insertions(+) create mode 100644 include/asm-arm/arch-iop32x/gpio.h create mode 100644 include/asm-arm/arch-iop33x/gpio.h create mode 100644 include/asm-arm/hardware/iop3xx-gpio.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/gpio.h b/include/asm-arm/arch-iop32x/gpio.h new file mode 100644 index 00000000000..708f4ec9db1 --- /dev/null +++ b/include/asm-arm/arch-iop32x/gpio.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_IOP32X_GPIO_H +#define __ASM_ARCH_IOP32X_GPIO_H + +#include + +#endif diff --git a/include/asm-arm/arch-iop33x/gpio.h b/include/asm-arm/arch-iop33x/gpio.h new file mode 100644 index 00000000000..ddd55bba9bb --- /dev/null +++ b/include/asm-arm/arch-iop33x/gpio.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_IOP33X_GPIO_H +#define __ASM_ARCH_IOP33X_GPIO_H + +#include + +#endif diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/include/asm-arm/hardware/iop3xx-gpio.h new file mode 100644 index 00000000000..0c9331f9ac2 --- /dev/null +++ b/include/asm-arm/hardware/iop3xx-gpio.h @@ -0,0 +1,73 @@ +/* + * linux/include/asm-arm/hardware/iop3xx-gpio.h + * + * IOP3xx GPIO wrappers + * + * Copyright (c) 2008 Arnaud Patard + * Based on IXP4XX gpio.h file + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H +#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H + +#include +#include + +#define IOP3XX_N_GPIOS 8 + +static inline int gpio_get_value(unsigned gpio) +{ + if (gpio > IOP3XX_N_GPIOS) + return __gpio_get_value(gpio); + + return gpio_line_get(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (gpio > IOP3XX_N_GPIOS) { + __gpio_set_value(gpio, value); + return; + } + gpio_line_set(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + if (gpio < IOP3XX_N_GPIOS) + return 0; + else + return __gpio_cansleep(gpio); +} + +/* + * The GPIOs are not generating any interrupt + * Note : manuals are not clear about this + */ +static inline int gpio_to_irq(int gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(int gpio) +{ + return -EINVAL; +} + +#endif + -- cgit v1.2.3 From aa9ae8eb1a917c8794bceef0a8e6ff1f4d7c46de Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Wed, 25 Jun 2008 22:17:16 +0100 Subject: Fix serial broken-ness on PXA250 PXA255 and 26x are the only PXA CPUs with HWUART. This patch prevents bogus initialisation on other models. Signed-off-by: Ian Molton --- include/asm-arm/arch-pxa/hardware.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index d9af6dabc89..b6a8317c2ec 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -69,6 +69,12 @@ _id == 0x212; \ }) +#define __cpu_is_pxa255(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x2d0; \ + }) + #define __cpu_is_pxa25x(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ @@ -76,6 +82,7 @@ }) #else #define __cpu_is_pxa21x(id) (0) +#define __cpu_is_pxa255(id) (0) #define __cpu_is_pxa25x(id) (0) #endif @@ -124,6 +131,11 @@ __cpu_is_pxa21x(read_cpuid_id()); \ }) +#define cpu_is_pxa255() \ + ({ \ + __cpu_is_pxa255(read_cpuid_id()); \ + }) + #define cpu_is_pxa25x() \ ({ \ __cpu_is_pxa25x(read_cpuid_id()); \ -- cgit v1.2.3 From 613526677a74c2b3d1b1696ea7334b2cf35155b3 Mon Sep 17 00:00:00 2001 From: sedji gaouaou Date: Thu, 10 Jul 2008 10:15:35 +0100 Subject: [ARM] 5130/4: Support for the at91sam9g20 Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou Signed-off-by: Justin Waters Acked-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91sam9260.h | 11 +++++++++++ include/asm-arm/arch-at91/board.h | 2 +- include/asm-arm/arch-at91/cpu.h | 7 +++++++ include/asm-arm/arch-at91/hardware.h | 2 +- include/asm-arm/arch-at91/timex.h | 5 +++++ 5 files changed, 25 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h index c8934fe34dc..889872a3f2a 100644 --- a/include/asm-arm/arch-at91/at91sam9260.h +++ b/include/asm-arm/arch-at91/at91sam9260.h @@ -6,6 +6,8 @@ * Common definitions. * Based on AT91SAM9260 datasheet revision A (Preliminary). * + * Includes also definitions for AT91SAM9XE and AT91SAM9G families + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -123,5 +125,14 @@ #define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ #define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ +#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ +#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ +#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ + +#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ #endif diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 1f247028686..94de788da76 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -77,7 +77,7 @@ struct at91_eth_data { }; extern void __init at91_add_device_eth(struct at91_eth_data *data); -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) #define eth_platform_data at91_eth_data #endif diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h index 7145166826a..52df794205c 100644 --- a/include/asm-arm/arch-at91/cpu.h +++ b/include/asm-arm/arch-at91/cpu.h @@ -21,6 +21,7 @@ #define ARCH_ID_AT91SAM9260 0x019803a0 #define ARCH_ID_AT91SAM9261 0x019703a0 #define ARCH_ID_AT91SAM9263 0x019607a0 +#define ARCH_ID_AT91SAM9G20 0x019905a0 #define ARCH_ID_AT91SAM9RL64 0x019b03a0 #define ARCH_ID_AT91CAP9 0x039A03A0 @@ -63,6 +64,12 @@ static inline unsigned long at91_arch_identify(void) #define cpu_is_at91sam9260() (0) #endif +#ifdef CONFIG_ARCH_AT91SAM9G20 +#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20) +#else +#define cpu_is_at91sam9g20() (0) +#endif + #ifdef CONFIG_ARCH_AT91SAM9261 #define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) #else diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index 2c826d8247a..016a3a3f663 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -18,7 +18,7 @@ #if defined(CONFIG_ARCH_AT91RM9200) #include -#elif defined(CONFIG_ARCH_AT91SAM9260) +#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) #include #elif defined(CONFIG_ARCH_AT91SAM9261) #include diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h index 6e084eb839d..298d8313cda 100644 --- a/include/asm-arm/arch-at91/timex.h +++ b/include/asm-arm/arch-at91/timex.h @@ -57,6 +57,11 @@ #define AT91SAM9_MASTER_CLOCK 100000000 #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) +#elif defined(CONFIG_ARCH_AT91SAM9G20) + +#define AT91SAM9_MASTER_CLOCK 132096000 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + #elif defined(CONFIG_ARCH_AT91CAP9) #define AT91CAP9_MASTER_CLOCK 100000000 -- cgit v1.2.3 From b5e4ad57eeffef0ac274413f83be4ef903719ea4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Va=C5=A1ut?= Date: Mon, 7 Jul 2008 17:25:46 +0100 Subject: [ARM] 5153/1: Add support for PalmTX handheld computer PalmTX is PXA27x based device with wifi, bluetooth, touchscreen, sdio slot, irda, keypad, nand flash, pxa framebuffer, serial and usb gadget interface. Supported by this patch is pxafb, touchscreen, irda, keypad and sdio slot. Signed-off-by: Marek Vasut Signed-off-by: Russell King --- include/asm-arm/arch-pxa/palmtx.h | 106 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 include/asm-arm/arch-pxa/palmtx.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/palmtx.h b/include/asm-arm/arch-pxa/palmtx.h new file mode 100644 index 00000000000..1e8bccbda51 --- /dev/null +++ b/include/asm-arm/arch-pxa/palmtx.h @@ -0,0 +1,106 @@ +/* + * GPIOs and interrupts for Palm T|X Handheld Computer + * + * Based on palmld-gpio.h by Alex Osborne + * + * Authors: Marek Vasut + * Cristiano P. + * Jan Herman <2hp@seznam.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTX_H_ +#define _INCLUDE_PALMTX_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTX_GPIO_RESET 1 + +#define GPIO_NR_PALMTX_POWER_DETECT 12 /* 90 */ +#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMTX_EARPHONE_DETECT 107 + +/* SD/MMC */ +#define GPIO_NR_PALMTX_SD_DETECT_N 14 +#define GPIO_NR_PALMTX_SD_POWER 114 /* probably */ +#define GPIO_NR_PALMTX_SD_READONLY 115 /* probably */ + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMTX_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTX_IR_DISABLE 40 + +/* USB */ +#define GPIO_NR_PALMTX_USB_DETECT_N 13 +#define GPIO_NR_PALMTX_USB_POWER 95 +#define GPIO_NR_PALMTX_USB_PULLUP 93 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTX_BL_POWER 84 +#define GPIO_NR_PALMTX_LCD_POWER 96 + +/* LCD BORDER */ +#define GPIO_NR_PALMTX_BORDER_SWITCH 98 +#define GPIO_NR_PALMTX_BORDER_SELECT 22 + +/* BLUETOOTH */ +#define GPIO_NR_PALMTX_BT_POWER 17 +#define GPIO_NR_PALMTX_BT_RESET 83 + +/* PCMCIA (WiFi) */ +#define GPIO_NR_PALMTX_PCMCIA_POWER1 94 +#define GPIO_NR_PALMTX_PCMCIA_POWER2 108 +#define GPIO_NR_PALMTX_PCMCIA_RESET 79 +#define GPIO_NR_PALMTX_PCMCIA_READY 116 + +/* NAND Flash ... this GPIO may be incorrect! */ +#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) +#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) +#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) +#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) + +/** HERE ARE INIT VALUES **/ + +/* Various addresses */ +#define PALMTX_PCMCIA_PHYS 0x28000000 +#define PALMTX_PCMCIA_VIRT 0xf0000000 +#define PALMTX_PCMCIA_SIZE 0x100000 + +#define PALMTX_PHYS_RAM_START 0xa0000000 +#define PALMTX_PHYS_IO_START 0x40000000 + +#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ +#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ + +/* TOUCHSCREEN */ +#define AC97_LINK_FRAME 21 + + +/* BATTERY */ +#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTX_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#define PALMTX_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMTX_MAX_INTENSITY 0xFE +#define PALMTX_DEFAULT_INTENSITY 0x7E +#define PALMTX_LIMIT_MASK 0x7F +#define PALMTX_PRESCALER 0x3F +#define PALMTX_PERIOD_NS 3500 + +#endif -- cgit v1.2.3 From 00249adc0ebf9bc5e1b7b53dee37601fd7291396 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Wed, 9 Jul 2008 08:05:42 +0100 Subject: [ARM] 5165/1: pxafb: More LCCR3 depth defines Add missing depth definitions to LCCR3. Signed-off-by: Daniel Ribeiro Acked-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/regs-lcd.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h index f762493f514..999b2a02ce2 100644 --- a/include/asm-arm/arch-pxa/regs-lcd.h +++ b/include/asm-arm/arch-pxa/regs-lcd.h @@ -24,6 +24,12 @@ #define LCCR3_4BPP (2 << 24) #define LCCR3_8BPP (3 << 24) #define LCCR3_16BPP (4 << 24) +#define LCCR3_18BPP (5 << 24) +#define LCCR3_18BPP_P (6 << 24) +#define LCCR3_19BPP (7 << 24) +#define LCCR3_19BPP_P (1 << 29) +#define LCCR3_24BPP ((1 << 29) | (1 << 24)) +#define LCCR3_25BPP ((1 << 29) | (2 << 24)) #define LCCR3_PDFOR_0 (0 << 30) #define LCCR3_PDFOR_1 (1 << 30) -- cgit v1.2.3 From c1450f156fda8921a55e3f4fe596274278010f31 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Wed, 9 Jul 2008 08:06:32 +0100 Subject: [ARM] 5164/1: pxafb: Support for RGB666, RGBT666, RGB888 and RGBT888 Add the .depth field to pxafb_mode_info and use it to set pixel data format as 18(RGB666), 19(RGBT666), 24(RGB888) or 25(RGBT888) Signed-off-by: Daniel Ribeiro Acked-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxafb.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h index bbd22396841..daf018d0c60 100644 --- a/include/asm-arm/arch-pxa/pxafb.h +++ b/include/asm-arm/arch-pxa/pxafb.h @@ -71,7 +71,8 @@ struct pxafb_mode_info { u_char bpp; u_int cmap_greyscale:1, - unused:31; + depth:8, + unused:23; /* Parallel Mode Timing */ u_char hsync_len; -- cgit v1.2.3 From 390d452fa1d912b6e76744a34777d7390ab1fa1c Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Wed, 9 Jul 2008 08:07:29 +0100 Subject: [ARM] 5163/1: pxa27x_udc: Allow choosing the bits in UP2OCR_SEOS Allow choosing the bits in UP2OCR_SEOS. Signed-off-by: Daniel Ribeiro Acked-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa27x-udc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h index bc1cf7d0773..ab1443f8bd8 100644 --- a/include/asm-arm/arch-pxa/pxa27x-udc.h +++ b/include/asm-arm/arch-pxa/pxa27x-udc.h @@ -97,7 +97,7 @@ #define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ #define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ #define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ -#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ +#define UP2OCR_SEOS(x) ((x & 7) << 24) /* Single-Ended Output Select */ #define UDCCSN(x) __REG2(0x40600100, (x) << 2) #define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ -- cgit v1.2.3 From 54b238469bce3a1b5012b2f0ebf261cf1c53e664 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 19 Jun 2008 03:11:49 +0100 Subject: [ARM] 5113/1: PXA SSP: Additional register definitions for PXA3xx SSP Also add some white space for a little clarity. Signed-off-by: Mark Brown Acked-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/regs-ssp.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h index 0255328c3c1..3c04cde2cf1 100644 --- a/include/asm-arm/arch-pxa/regs-ssp.h +++ b/include/asm-arm/arch-pxa/regs-ssp.h @@ -20,6 +20,10 @@ #define SSTSS (0x38) /* SSP Timeslot Status */ #define SSACD (0x3C) /* SSP Audio Clock Divider */ +#if defined(CONFIG_PXA3xx) +#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ +#endif + /* Common PXA2xx bits first */ #define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ #define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ @@ -29,10 +33,12 @@ #define SSCR0_National (0x2 << 4) /* National Microwire */ #define SSCR0_ECS (1 << 6) /* External clock select */ #define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ + #if defined(CONFIG_PXA25x) #define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ -#elif defined(CONFIG_PXA27x) + +#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ #define SSCR0_EDSS (1 << 20) /* Extended data size select */ @@ -45,6 +51,10 @@ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif +#if defined(CONFIG_PXA3xx) +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ +#endif + #define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ #define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ #define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ @@ -109,5 +119,9 @@ #define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ #define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ +#if defined(CONFIG_PXA3xx) +#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ +#endif + #endif /* __ASM_ARCH_REGS_SSP_H */ -- cgit v1.2.3 From c316f101a10f2681618ffb537ecba6084d5a137e Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Thu, 10 Jul 2008 20:01:07 +0100 Subject: E-series GPIO / IRQ definitions. --- include/asm-arm/arch-pxa/eseries-gpio.h | 50 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/eseries-irq.h | 27 ++++++++++++++++++ 2 files changed, 77 insertions(+) create mode 100644 include/asm-arm/arch-pxa/eseries-gpio.h create mode 100644 include/asm-arm/arch-pxa/eseries-irq.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/include/asm-arm/arch-pxa/eseries-gpio.h new file mode 100644 index 00000000000..4c90b131027 --- /dev/null +++ b/include/asm-arm/arch-pxa/eseries-gpio.h @@ -0,0 +1,50 @@ +/* + * eseries-gpio.h + * + * Copyright (C) Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* e-series power button */ +#define GPIO_ESERIES_POWERBTN 0 + +/* UDC GPIO definitions */ +#define GPIO_E7XX_USB_DISC 13 +#define GPIO_E7XX_USB_PULLUP 3 + +#define GPIO_E800_USB_DISC 4 +#define GPIO_E800_USB_PULLUP 84 + +/* e740 PCMCIA GPIO definitions */ +/* Note: PWR1 seems to be inverted */ +#define GPIO_E740_PCMCIA_CD0 8 +#define GPIO_E740_PCMCIA_CD1 44 +#define GPIO_E740_PCMCIA_RDY0 11 +#define GPIO_E740_PCMCIA_RDY1 6 +#define GPIO_E740_PCMCIA_RST0 27 +#define GPIO_E740_PCMCIA_RST1 24 +#define GPIO_E740_PCMCIA_PWR0 20 +#define GPIO_E740_PCMCIA_PWR1 23 + +/* e750 PCMCIA GPIO definitions */ +#define GPIO_E750_PCMCIA_CD0 8 +#define GPIO_E750_PCMCIA_RDY0 12 +#define GPIO_E750_PCMCIA_RST0 27 +#define GPIO_E750_PCMCIA_PWR0 20 + +/* e800 PCMCIA GPIO definitions */ +#define GPIO_E800_PCMCIA_RST0 69 +#define GPIO_E800_PCMCIA_RST1 72 +#define GPIO_E800_PCMCIA_PWR0 20 +#define GPIO_E800_PCMCIA_PWR1 73 + +/* e7xx IrDA power control */ +#define GPIO_E7XX_IR_ON 38 + +/* ASIC related GPIOs */ +#define GPIO_ESERIES_TMIO_IRQ 5 +#define GPIO_E800_ANGELX_IRQ 8 diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/include/asm-arm/arch-pxa/eseries-irq.h new file mode 100644 index 00000000000..f2a93d5e31d --- /dev/null +++ b/include/asm-arm/arch-pxa/eseries-irq.h @@ -0,0 +1,27 @@ +/* + * eseries-irq.h + * + * Copyright (C) Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8) +#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n)) + +#define ANGELX_RDY0_IRQ IRQ_ANGELX(0) +#define ANGELX_ST0_IRQ IRQ_ANGELX(1) +#define ANGELX_CD0_IRQ IRQ_ANGELX(2) +#define ANGELX_RDY1_IRQ IRQ_ANGELX(3) +#define ANGELX_ST1_IRQ IRQ_ANGELX(4) +#define ANGELX_CD1_IRQ IRQ_ANGELX(5) + +#define TMIO_IRQ_BASE (IRQ_BOARD_START+0) +#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n)) + +#define TMIO_SD_IRQ IRQ_TMIO(1) +#define TMIO_USB_IRQ IRQ_TMIO(2) + -- cgit v1.2.3 From 8fb105f5cc7f31ff37755945378a668f4c21590e Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Wed, 25 Jun 2008 22:34:51 +0100 Subject: PXA UDC - allow use of inverted GPIO for pullup Signed-off-by: Ian Molton --- include/asm-arm/mach/udc_pxa2xx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h index f9f3606986c..9e5ed7c0f27 100644 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ b/include/asm-arm/mach/udc_pxa2xx.h @@ -23,6 +23,7 @@ struct pxa2xx_udc_mach_info { */ bool gpio_vbus_inverted; u16 gpio_vbus; /* high == vbus present */ + bool gpio_pullup_inverted; u16 gpio_pullup; /* high == pullup activated */ }; -- cgit v1.2.3 From 5d31e43589589e63f5b96abc62372d2ef331c14a Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 11 Jul 2008 12:45:39 +0800 Subject: [ARM] pxa: add base support for PXA930 (aka Tavor-P) Signed-off-by: Eric Miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/hardware.h | 16 ++ include/asm-arm/arch-pxa/mfp-pxa930.h | 491 ++++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/mfp.h | 8 + 3 files changed, 515 insertions(+) create mode 100644 include/asm-arm/arch-pxa/mfp-pxa930.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 09868de841a..979a45695d7 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -126,6 +126,16 @@ #define __cpu_is_pxa320(id) (0) #endif +#ifdef CONFIG_CPU_PXA930 +#define __cpu_is_pxa930(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x683; \ + }) +#else +#define __cpu_is_pxa930(id) (0) +#endif + #define cpu_is_pxa21x() \ ({ \ __cpu_is_pxa21x(read_cpuid_id()); \ @@ -161,6 +171,12 @@ __cpu_is_pxa320(read_cpuid_id()); \ }) +#define cpu_is_pxa930() \ + ({ \ + unsigned int id = read_cpuid(CPUID_ID); \ + __cpu_is_pxa930(id); \ + }) + /* * CPUID Core Generation Bit * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/include/asm-arm/arch-pxa/mfp-pxa930.h new file mode 100644 index 00000000000..c4e945ab192 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa930.h @@ -0,0 +1,491 @@ +/* + * linux/include/asm-arm/arch-pxa/mfp-pxa930.h + * + * PXA930 specific MFP configuration definitions + * + * Copyright (C) 2007-2008 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_PXA9xx_H +#define __ASM_ARCH_MFP_PXA9xx_H + +#include +#include + +/* GPIO */ +#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) +#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) +#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) + +#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0) +#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0) +#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0) +#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0) + +#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0) +#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0) +#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0) +#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0) +#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0) +#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0) +#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0) +#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0) +#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0) +#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0) +#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0) +#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0) +#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0) +#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0) +#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0) +#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0) +#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0) +#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0) +#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0) +#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0) +#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0) +#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0) +#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0) +#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0) +#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0) + +#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0) +#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0) +#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0) +#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0) +#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0) +#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0) +#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0) +#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0) +#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0) +#define RDY_GPIO_62 MFP_CFG(RDY, AF0) + +/* Chip Select */ +#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH) +#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH) + +/* AC97 */ +#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3) +#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3) +#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3) +#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3) +#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3) +#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3) + +/* I2C */ +#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH) +#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH) + +#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH) +#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH) + +#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH) +#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH) + +#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH) +#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH) + +#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH) +#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH) + +#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) +#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) + +#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH) +#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH) + +/* QCI */ +#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW) +#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW) +#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW) +#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW) +#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW) +#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW) +#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW) +#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW) +#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW) +#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW) +#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW) +#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW) +#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW) +#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW) + +/* KEYPAD */ +#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT) +#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT) +#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT) +#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT) +#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT) +#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT) +#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT) +#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT) + +#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT) +#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT) +#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT) +#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT) + +#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT) +#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT) +#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT) +#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT) +#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT) +#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT) + +#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT) +#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT) +#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT) +#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT) +#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT) +#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT) +#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT) +#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1) +#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4) + +#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH) +#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH) +#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH) +#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) +#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH) +#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH) +#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH) +#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH) +#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH) + +/* LCD */ +#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1) +#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1) +#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1) +#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1) +#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1) +#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2) +#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1) +#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1) +#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1) +#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1) +#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1) +#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1) +#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1) +#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1) +#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1) +#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1) +#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1) +#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1) +#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1) +#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1) +#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1) +#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1) +#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1) +#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1) +#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1) +#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3) +#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3) +#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1) + +/* Mini-LCD */ +#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3) +#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3) +#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3) +#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3) +#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3) +#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3) +#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3) +#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3) +#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3) +#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3) +#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3) +#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3) +#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3) +#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3) +#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3) +#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3) +#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3) +#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3) +#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3) +#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3) +#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5) + +/* MMC1 */ +#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4) +#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4) +#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4) +#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4) +#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4) +#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4) +#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3) +#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3) +#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3) +#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3) +#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3) +#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3) + +#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2) +#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2) +#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2) +#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3) +#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2) + +/* MMC2 */ +#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7) +#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7) +#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7) +#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7) +#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7) +#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7) + +#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1) +#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1) +#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1) +#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1) +#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1) +#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1) + +#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3) +#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3) +#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3) +#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3) +#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3) +#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3) + +/* BSSP1 */ +#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3) +#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3) +#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3) +#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3) +#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5) +#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5) + +/* BSSP2 */ +#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1) +#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1) +#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1) +#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1) +#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1) +#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4) + +/* BSSP3 */ +#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1) +#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1) +#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1) +#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1) +#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1) + +/* BSSP4 */ +#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4) +#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4) +#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4) +#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4) + +#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4) +#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4) +#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4) +#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4) + +/* GSSP1 */ +#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2) +#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2) +#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2) +#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2) +#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2) + +#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4) +#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4) +#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4) +#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4) + +/* GSSP2 */ +#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4) +#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4) +#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4) +#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4) + +#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4) +#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4) +#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4) +#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4) + +#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2) +#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2) +#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2) +#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2) +#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2) +#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5) + +#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2) +#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2) +#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2) +#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2) + +/* UART1 - FFUART */ +#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1) +#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1) +#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1) +#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1) +#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1) +#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1) +#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1) +#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1) + +#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2) +#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2) +#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2) +#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2) +#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2) +#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2) +#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2) +#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2) + +/* UART2 - BTUART */ +#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1) +#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1) +#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1) +#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1) + +/* UART3 - STUART */ +#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3) +#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3) +#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3) +#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3) + +#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5) +#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5) +#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5) +#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5) + +/* DFI */ +#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2) +#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2) +#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2) +#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2) +#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2) +#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2) +#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2) +#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2) +#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2) +#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2) +#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2) +#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2) +#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2) +#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2) +#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2) +#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2) +#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2) +#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2) +#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2) +#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2) +#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2) +#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2) + +/* DFI - NAND */ +#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH) +#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW) +#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW) +#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW) +#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW) +#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW) +#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW) +#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW) +#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW) +#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW) +#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW) +#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW) +#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW) +#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW) +#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW) +#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW) +#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW) +#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW) +#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH) +#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH) +#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH) +#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH) +#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH) +#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH) +#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH) + +/* PWM */ +#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW) +#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW) +#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW) +#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW) +#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW) +#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW) + +/* CIR */ +#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1) +#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3) + +/* USB P2 */ +#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3) +#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5) +#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2) +#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7) +#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6) +#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3) + +#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2) +#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT) +#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2) +#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2) +#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2) +#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2) +#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2) +#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2) + +#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3) +#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3) +#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3) +#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3) +#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3) +#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3) +#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3) +#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3) + +/* ULPI */ +#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4) +#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7) +#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5) +#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5) +#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5) +#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5) +#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5) +#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5) +#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4) +#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4) +#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4) +#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4) + +#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3) +#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7) +#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5) +#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4) +#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3) +#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3) + +#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5) +#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7) +#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5) +#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4) + +#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3) +#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7) +#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3) +#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5) +#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4) +#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3) + +/* 1 wire */ +#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5) + +#endif /* __ASM_ARCH_MFP_PXA9xx_H */ diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h index 02f6157396d..e7d58798da6 100644 --- a/include/asm-arm/arch-pxa/mfp.h +++ b/include/asm-arm/arch-pxa/mfp.h @@ -210,6 +210,14 @@ enum { MFP_PIN_DF_IO14, MFP_PIN_DF_IO15, + /* additional pins on PXA930 */ + MFP_PIN_GSIM_UIO, + MFP_PIN_GSIM_UCLK, + MFP_PIN_GSIM_UDET, + MFP_PIN_GSIM_nURST, + MFP_PIN_PMIC_INT, + MFP_PIN_RDY, + MFP_PIN_MAX, }; -- cgit v1.2.3 From c5a89c6c0805959f813e8342d6f4040860f6d7db Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Fri, 30 May 2008 14:07:47 +0200 Subject: mmc: at91_mci: avoid timeouts The at91 mci controller internal state machine seems to often crash. This can be fixed by resetting the controller after each command for at91rm9200 and by setting the MCI_BLKR register on at91sam926*. Signed-off-by: Marc Pignat Signed-off-by: Hans J Koch Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- include/asm-arm/arch-at91/at91_mci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h index 1551fc24eb4..400ec10014b 100644 --- a/include/asm-arm/arch-at91/at91_mci.h +++ b/include/asm-arm/arch-at91/at91_mci.h @@ -75,6 +75,10 @@ #define AT91_MCI_TRTYP_MULTIPLE (1 << 19) #define AT91_MCI_TRTYP_STREAM (2 << 19) +#define AT91_MCI_BLKR 0x18 /* Block Register */ +#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ +#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */ + #define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ #define AT91_MCR_RDR 0x30 /* Receive Data Register */ #define AT91_MCR_TDR 0x34 /* Transmit Data Register */ -- cgit v1.2.3 From be518018c6b9224c02284fb243207ef741c31ec6 Mon Sep 17 00:00:00 2001 From: Thomas Kleffel Date: Mon, 30 Jun 2008 22:40:24 +0100 Subject: MMC: S3C24XX MMC/SD driver. This is the latest S3C MMC/SD driver by Thomas Kleffel with cleanups as suggested by AKPM done by Ben Dooks. Signed-off-by: Ben Dooks Signed-off-by: Thomas Kleffel Signed-off-by: Pierre Ossman --- include/asm-arm/arch-s3c2410/regs-sdi.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h index bb9d30b7295..bfb222fa4ab 100644 --- a/include/asm-arm/arch-s3c2410/regs-sdi.h +++ b/include/asm-arm/arch-s3c2410/regs-sdi.h @@ -28,9 +28,15 @@ #define S3C2410_SDIDCNT (0x30) #define S3C2410_SDIDSTA (0x34) #define S3C2410_SDIFSTA (0x38) + #define S3C2410_SDIDATA (0x3C) #define S3C2410_SDIIMSK (0x40) +#define S3C2440_SDIDATA (0x40) +#define S3C2440_SDIIMSK (0x3C) + +#define S3C2440_SDICON_SDRESET (1<<8) +#define S3C2440_SDICON_MMCCLOCK (1<<5) #define S3C2410_SDICON_BYTEORDER (1<<4) #define S3C2410_SDICON_SDIOIRQ (1<<3) #define S3C2410_SDICON_RWAITEN (1<<2) @@ -42,7 +48,8 @@ #define S3C2410_SDICMDCON_LONGRSP (1<<10) #define S3C2410_SDICMDCON_WAITRSP (1<<9) #define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_INDEX (0xff) +#define S3C2410_SDICMDCON_SENDERHOST (1<<6) +#define S3C2410_SDICMDCON_INDEX (0x3f) #define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) #define S3C2410_SDICMDSTAT_CMDSENT (1<<11) @@ -51,6 +58,9 @@ #define S3C2410_SDICMDSTAT_XFERING (1<<8) #define S3C2410_SDICMDSTAT_INDEX (0xff) +#define S3C2440_SDIDCON_DS_BYTE (0<<22) +#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) +#define S3C2440_SDIDCON_DS_WORD (2<<22) #define S3C2410_SDIDCON_IRQPERIOD (1<<21) #define S3C2410_SDIDCON_TXAFTERRESP (1<<20) #define S3C2410_SDIDCON_RXAFTERCMD (1<<19) @@ -59,6 +69,7 @@ #define S3C2410_SDIDCON_WIDEBUS (1<<16) #define S3C2410_SDIDCON_DMAEN (1<<15) #define S3C2410_SDIDCON_STOP (1<<14) +#define S3C2440_SDIDCON_DATSTART (1<<14) #define S3C2410_SDIDCON_DATMODE (3<<12) #define S3C2410_SDIDCON_BLKNUM (0x7ff) @@ -68,6 +79,7 @@ #define S3C2410_SDIDCON_XFER_RXSTART (2<<12) #define S3C2410_SDIDCON_XFER_TXSTART (3<<12) +#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) #define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) #define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) @@ -82,10 +94,12 @@ #define S3C2410_SDIDSTA_TXDATAON (1<<1) #define S3C2410_SDIDSTA_RXDATAON (1<<0) +#define S3C2440_SDIFSTA_FIFORESET (1<<16) +#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ #define S3C2410_SDIFSTA_TFDET (1<<13) #define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TXHALF (1<<11) -#define S3C2410_SDIFSTA_TXEMPTY (1<<10) +#define S3C2410_SDIFSTA_TFHALF (1<<11) +#define S3C2410_SDIFSTA_TFEMPTY (1<<10) #define S3C2410_SDIFSTA_RFLAST (1<<9) #define S3C2410_SDIFSTA_RFFULL (1<<8) #define S3C2410_SDIFSTA_RFHALF (1<<7) -- cgit v1.2.3 From edb5a98e43682d66c98ddd1dee863d867807546e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:29 +0100 Subject: MMC: S3C24XX: Add platform data for MMC/SD driver This patch adds platform data support to the s3mci driver. This allows flexible board-specific configuration of set_power, card detect and read only pins. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- include/asm-arm/plat-s3c24xx/mci.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 include/asm-arm/plat-s3c24xx/mci.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h new file mode 100644 index 00000000000..5be2c1449c6 --- /dev/null +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -0,0 +1,12 @@ +#ifndef _ARCH_MCI_H +#define _ARCH_MCI_H + +struct s3c24xx_mci_pdata { + unsigned int gpio_detect; + unsigned int gpio_wprotect; + unsigned long ocr_avail; + void (*set_power)(unsigned char power_mode, + unsigned short vdd); +}; + +#endif /* _ARCH_NCI_H */ -- cgit v1.2.3 From cf0984c8edf63017fcc2ead212ca057877e345df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:30 +0100 Subject: MMC: S3C24XX: Add support to invert write protect line Support for inverting the sense of the MMC driver's write protect detection line. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- include/asm-arm/plat-s3c24xx/mci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h index 5be2c1449c6..4f4ccd18f0c 100644 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -2,6 +2,8 @@ #define _ARCH_MCI_H struct s3c24xx_mci_pdata { + unsigned int wprotect_invert : 1; + unsigned int gpio_detect; unsigned int gpio_wprotect; unsigned long ocr_avail; -- cgit v1.2.3 From 50a845700b3b55f825b0eb901b03d6091f66d9f4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:36 +0100 Subject: MMC: S3C24XX: Add media presence test to request handling. Ensure that we have physical media present before attempting to send a request to a card. This ensures that we do not get flooded by errors from commands that can never be completed timing out. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- include/asm-arm/plat-s3c24xx/mci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h index 4f4ccd18f0c..2d0852ac3b2 100644 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -3,6 +3,7 @@ struct s3c24xx_mci_pdata { unsigned int wprotect_invert : 1; + unsigned int detect_invert : 1; /* set => detect active high. */ unsigned int gpio_detect; unsigned int gpio_wprotect; -- cgit v1.2.3 From 2a46fa13d788364c093c4296fe01cae837aa8919 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Jul 2008 17:59:56 -0700 Subject: iop_adma: cleanup iop_chan_xor_slot_count - use a table for iop13xx, trade text for data - shrink the iop3xx to a cache line Signed-off-by: Dan Williams --- include/asm-arm/arch-iop13xx/adma.h | 18 +++++++----------- include/asm-arm/hardware/iop3xx-adma.h | 4 ++-- 2 files changed, 9 insertions(+), 13 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h index 90d14ee564f..ef4f5da2029 100644 --- a/include/asm-arm/arch-iop13xx/adma.h +++ b/include/asm-arm/arch-iop13xx/adma.h @@ -198,17 +198,13 @@ iop_chan_memset_slot_count(size_t len, int *slots_per_op) static inline int iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) { - int num_slots; - /* slots_to_find = 1 for basic descriptor + 1 per 4 sources above 1 - * (1 source => 8 bytes) (1 slot => 32 bytes) - */ - num_slots = 1 + (((src_cnt - 1) << 3) >> 5); - if (((src_cnt - 1) << 3) & 0x1f) - num_slots++; - - *slots_per_op = num_slots; - - return num_slots; + static const char slot_count_table[] = { 1, 2, 2, 2, + 2, 3, 3, 3, + 3, 4, 4, 4, + 4, 5, 5, 5, + }; + *slots_per_op = slot_count_table[src_cnt - 1]; + return *slots_per_op; } #define ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h index a32b86ac62a..af64676650a 100644 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ b/include/asm-arm/hardware/iop3xx-adma.h @@ -260,7 +260,7 @@ static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) { - static const int slot_count_table[] = { 0, + static const char slot_count_table[] = { 1, 1, 1, 1, /* 01 - 04 */ 2, 2, 2, 2, /* 05 - 08 */ 4, 4, 4, 4, /* 09 - 12 */ @@ -270,7 +270,7 @@ static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, 8, 8, 8, 8, /* 25 - 28 */ 8, 8, 8, 8, /* 29 - 32 */ }; - *slots_per_op = slot_count_table[src_cnt]; + *slots_per_op = slot_count_table[src_cnt - 1]; return *slots_per_op; } -- cgit v1.2.3 From 1fe532685a1984dc9f2603ed20bd5e630ba79709 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 18 Jul 2008 13:30:14 +0400 Subject: ARM: support generic per-device coherent dma mem Signed-off-by: Dmitry Baryshkov Cc: Jesse Barnes Cc: Russell King Signed-off-by: Ingo Molnar --- include/asm-arm/dma-mapping.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h index e99406a7bec..943f23bc99a 100644 --- a/include/asm-arm/dma-mapping.h +++ b/include/asm-arm/dma-mapping.h @@ -7,6 +7,8 @@ #include +#include + /* * DMA-consistent mapping functions. These allocate/free a region of * uncached, unwrite-buffered mapped memory space for use with DMA -- cgit v1.2.3 From 5cbad0ebf45c5417104b383dc0e34f64fa7f2473 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 20 Feb 2008 13:33:40 -0600 Subject: kgdb: support for ARCH=arm This patch adds the ARCH=arm specific a kgdb backend, originally written by Deepak Saxena and George Davis . Geoff Levand , Nicolas Pitre, Manish Lachwani, and Jason Wessel have contributed various fixups here as well. The KGDB patch makes one change to the core ARM architecture such that the traps are initialized early for use with the debugger or other subsystems. [ mingo@elte.hu: small cleanups. ] [ ben-linux@fluff.org: fixed early_trap_init ] Signed-off-by: Jason Wessel Acked-by: Deepak Saxena --- include/asm-arm/kgdb.h | 104 ++++++++++++++++++++++++++++++++++++++++++++++++ include/asm-arm/traps.h | 2 + 2 files changed, 106 insertions(+) create mode 100644 include/asm-arm/kgdb.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h new file mode 100644 index 00000000000..67af4b84198 --- /dev/null +++ b/include/asm-arm/kgdb.h @@ -0,0 +1,104 @@ +/* + * ARM KGDB support + * + * Author: Deepak Saxena + * + * Copyright (C) 2002 MontaVista Software Inc. + * + */ + +#ifndef __ARM_KGDB_H__ +#define __ARM_KGDB_H__ + +#include + +/* + * GDB assumes that we're a user process being debugged, so + * it will send us an SWI command to write into memory as the + * debug trap. When an SWI occurs, the next instruction addr is + * placed into R14_svc before jumping to the vector trap. + * This doesn't work for kernel debugging as we are already in SVC + * we would loose the kernel's LR, which is a bad thing. This + * is bad thing. + * + * By doing this as an undefined instruction trap, we force a mode + * switch from SVC to UND mode, allowing us to save full kernel state. + * + * We also define a KGDB_COMPILED_BREAK which can be used to compile + * in breakpoints. This is important for things like sysrq-G and for + * the initial breakpoint from trap_init(). + * + * Note to ARM HW designers: Add real trap support like SH && PPC to + * make our lives much much simpler. :) + */ +#define BREAK_INSTR_SIZE 4 +#define GDB_BREAKINST 0xef9f0001 +#define KGDB_BREAKINST 0xe7ffdefe +#define KGDB_COMPILED_BREAK 0xe7ffdeff +#define CACHE_FLUSH_IS_SAFE 1 + +#ifndef __ASSEMBLY__ + +static inline void arch_kgdb_breakpoint(void) +{ + asm(".word 0xe7ffdeff"); +} + +extern void kgdb_handle_bus_error(void); +extern int kgdb_fault_expected; + +#endif /* !__ASSEMBLY__ */ + +/* + * From Kevin Hilman: + * + * gdb is expecting the following registers layout. + * + * r0-r15: 1 long word each + * f0-f7: unused, 3 long words each !! + * fps: unused, 1 long word + * cpsr: 1 long word + * + * Even though f0-f7 and fps are not used, they need to be + * present in the registers sent for correct processing in + * the host-side gdb. + * + * In particular, it is crucial that CPSR is in the right place, + * otherwise gdb will not be able to correctly interpret stepping over + * conditional branches. + */ +#define _GP_REGS 16 +#define _FP_REGS 8 +#define _EXTRA_REGS 2 +#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) + +#define KGDB_MAX_NO_CPUS 1 +#define BUFMAX 400 +#define NUMREGBYTES (GDB_MAX_REGS << 2) +#define NUMCRITREGBYTES (32 << 2) + +#define _R0 0 +#define _R1 1 +#define _R2 2 +#define _R3 3 +#define _R4 4 +#define _R5 5 +#define _R6 6 +#define _R7 7 +#define _R8 8 +#define _R9 9 +#define _R10 10 +#define _FP 11 +#define _IP 12 +#define _SPT 13 +#define _LR 14 +#define _PC 15 +#define _CPSR (GDB_MAX_REGS - 1) + +/* + * So that we can denote the end of a frame for tracing, + * in the simple case: + */ +#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func) + +#endif /* __ASM_KGDB_H__ */ diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h index f1541afcf85..aa399aec568 100644 --- a/include/asm-arm/traps.h +++ b/include/asm-arm/traps.h @@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr) ptr < (unsigned long)&__exception_text_end; } +extern void __init early_trap_init(void); + #endif -- cgit v1.2.3 From 2351ec533ed0dd56052ab96988d2161d5ecc8ed9 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 24 Jul 2008 08:09:32 -0400 Subject: Remove asm/semaphore.h All users have now been converted to linux/semaphore.h and we don't need to keep these files around any longer. Signed-off-by: Matthew Wilcox --- include/asm-arm/semaphore.h | 1 - 1 file changed, 1 deletion(-) delete mode 100644 include/asm-arm/semaphore.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h deleted file mode 100644 index d9b2034ed1d..00000000000 --- a/include/asm-arm/semaphore.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v1.2.3 From 27ac792ca0b0a1e7e65f20342260650516c95864 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Wed, 23 Jul 2008 21:28:13 -0700 Subject: PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit boundary. For example: u64 val = PAGE_ALIGN(size); always returns a value < 4GB even if size is greater than 4GB. The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for example): #define PAGE_SHIFT 12 #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) ... #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) The "~" is performed on a 32-bit value, so everything in "and" with PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary. Using the ALIGN() macro seems to be the right way, because it uses typeof(addr) for the mask. Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in include/linux/mm.h. See also lkml discussion: http://lkml.org/lkml/2008/6/11/237 [akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c] [akpm@linux-foundation.org: fix v850] [akpm@linux-foundation.org: fix powerpc] [akpm@linux-foundation.org: fix arm] [akpm@linux-foundation.org: fix mips] [akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c] [akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c] [akpm@linux-foundation.org: fix powerpc] Signed-off-by: Andrea Righi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/page-nommu.h | 4 +--- include/asm-arm/page.h | 3 --- 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h index a1bcad06048..ea1cde84f50 100644 --- a/include/asm-arm/page-nommu.h +++ b/include/asm-arm/page-nommu.h @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + #ifndef _ASMARM_PAGE_NOMMU_H #define _ASMARM_PAGE_NOMMU_H @@ -42,9 +43,6 @@ typedef unsigned long pgprot_t; #define __pmd(x) (x) #define __pgprot(x) (x) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index 8e05bdb5f12..7c5fc5582e5 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -15,9 +15,6 @@ #define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #ifndef __ASSEMBLY__ #ifndef CONFIG_MMU -- cgit v1.2.3 From e7ecb331e11d1f7aa66aeef9170fc20781c9bb55 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 23 Jul 2008 21:28:35 -0700 Subject: pm: remove remaining obsolete definitions from pm.h Remove the remaining obsolete definitions from include/linux/pm.h and move the definitions of PM_SUSPEND and PM_RESUME to the header of h3600 which is the only user of them. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/arch-sa1100/h3600.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h index 1b635597157..3ca0ecf095e 100644 --- a/include/asm-arm/arch-sa1100/h3600.h +++ b/include/asm-arm/arch-sa1100/h3600.h @@ -23,6 +23,11 @@ #ifndef _INCLUDE_H3600_H_ #define _INCLUDE_H3600_H_ +typedef int __bitwise pm_request_t; + +#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */ +#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */ + /* generalized support for H3xxx series Compaq Pocket PC's */ #define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800()) -- cgit v1.2.3 From d83b8b85cd56a083d30df73f3fd5e4714591b910 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 24 Jul 2008 22:53:30 +0200 Subject: ide: define MAX_HWIFS in * Now that ide_hwif_t instances are allocated dynamically the difference between MAX_HWIFS == 2 and MAX_HWIFS == 10 is ~100 bytes (x86-32) so use MAX_HWIFS == 10 on all archs except these ones that use MAX_HWIFS == 1. * Define MAX_HWIFS in instead of . [ Please note that avr32/cris/v850 have no and alpha/ia64/sh always define CONFIG_IDE_MAX_HWIFS. ] Signed-off-by: Bartlomiej Zolnierkiewicz --- include/asm-arm/ide.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h index 88f4d231ce4..a48019f99d0 100644 --- a/include/asm-arm/ide.h +++ b/include/asm-arm/ide.h @@ -13,10 +13,6 @@ #ifdef __KERNEL__ -#ifndef MAX_HWIFS -#define MAX_HWIFS 4 -#endif - #define __ide_mm_insw(port,addr,len) readsw(port,addr,len) #define __ide_mm_insl(port,addr,len) readsl(port,addr,len) #define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) -- cgit v1.2.3 From b69c49b78457f681ecfb3147bd968434ee6559c1 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 25 Jul 2008 01:45:40 -0700 Subject: clean up duplicated alloc/free_thread_info We duplicate alloc/free_thread_info defines on many platforms (the majority uses __get_free_pages/free_pages). This patch defines common defines and removes these duplicated defines. __HAVE_ARCH_THREAD_INFO_ALLOCATOR is introduced for platforms that do something different. Signed-off-by: FUJITA Tomonori Acked-by: Russell King Cc: Pekka Enberg Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/thread_info.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index f5a66478631..d4be2d64616 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -97,19 +97,6 @@ static inline struct thread_info *current_thread_info(void) return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); } -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) \ - ((struct thread_info *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, \ - THREAD_SIZE_ORDER)) -#else -#define alloc_thread_info(tsk) \ - ((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER)) -#endif - -#define free_thread_info(info) \ - free_pages((unsigned long)info, THREAD_SIZE_ORDER); - #define thread_saved_pc(tsk) \ ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc))) #define thread_saved_fp(tsk) \ -- cgit v1.2.3 From f22ab814a24e654b1de24db0c5f8b57b5ab2026a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 25 Jul 2008 01:47:34 -0700 Subject: include/asm/ptrace.h userspace headers cleanup This patch contains the following cleanups for the asm/ptrace.h userspace headers: - include/asm-generic/Kbuild.asm already lists ptrace.h, remove the superfluous listings in the Kbuild files of the following architectures: - cris - frv - powerpc - x86 - don't expose function prototypes and macros to userspace: - arm - blackfin - cris - mn10300 - parisc - remove #ifdef CONFIG_'s around #define's: - blackfin - m68knommu - sh: AFAIK __SH5__ should work in both kernel and userspace, no need to leak CONFIG_SUPERH64 to userspace - xtensa: cosmetical change to remove empty #ifndef __ASSEMBLY__ #else #endif from the userspace headers Not changed by this patch is the fact that the following architectures have a different struct pt_regs depending on CONFIG_ variables: - h8300 - m68knommu - mips This does not work in userspace. Signed-off-by: Adrian Bunk Cc: Cc: Roland McGrath Cc: Oleg Nesterov Acked-by: Greg Ungerer Acked-by: Paul Mundt Acked-by: Grant Grundler Acked-by: Jesper Nilsson Acked-by: Chris Zankel Acked-by: David Howells Acked-by: Paul Mackerras Acked-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/ptrace.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h index 7aaa206cb54..8382b7510f9 100644 --- a/include/asm-arm/ptrace.h +++ b/include/asm-arm/ptrace.h @@ -139,8 +139,6 @@ static inline int valid_user_regs(struct pt_regs *regs) return 0; } -#endif /* __KERNEL__ */ - #define pc_pointer(v) \ ((v) & ~PCMASK) @@ -153,10 +151,10 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define profile_pc(regs) instruction_pointer(regs) #endif -#ifdef __KERNEL__ #define predicate(x) ((x) & 0xf0000000) #define PREDICATE_ALWAYS 0xe0000000 -#endif + +#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From 7dcf2a9fced59e58e4694cdcf15850c01fdba89b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 1 Jul 2008 19:27:16 +0300 Subject: remove dummy asm/kvm.h files This patch removes the dummy asm/kvm.h files on architectures not (yet) supporting KVM and uses the same conditional headers installation as already used for a.out.h . Also removed are superfluous install rules in the s390 and x86 Kbuild files (they are already in Kbuild.asm). Signed-off-by: Adrian Bunk Acked-by: Sam Ravnborg Signed-off-by: David Woodhouse --- include/asm-arm/kvm.h | 6 ------ 1 file changed, 6 deletions(-) delete mode 100644 include/asm-arm/kvm.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h deleted file mode 100644 index cb3c08cbcb9..00000000000 --- a/include/asm-arm/kvm.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __LINUX_KVM_ARM_H -#define __LINUX_KVM_ARM_H - -/* arm does not support KVM */ - -#endif -- cgit v1.2.3 From 0c65f459ce6c8bd873a61b3ae1e57858ab1debf3 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 23 Jul 2008 15:35:22 -0700 Subject: [ARM] fix fls() for 64-bit arguments arm's fls() is implemented as a macro, causing it to misbehave when passed 64-bit arguments. Fix. Cc: Nickolay Vinogradov Tested-by: Krzysztof Halasa Cc: Signed-off-by: Andrew Morton Signed-off-by: Russell King --- include/asm-arm/bitops.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index 5c60bfc1a84..9a1db20e032 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -277,9 +277,16 @@ static inline int constant_fls(int x) * the clz instruction for much better code efficiency. */ -#define fls(x) \ +#define __fls(x) \ ( __builtin_constant_p(x) ? constant_fls(x) : \ ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) + +/* Implement fls() in C so that 64-bit args are suitably truncated */ +static inline int fls(int x) +{ + return __fls(x); +} + #define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) #define __ffs(x) (ffs(x) - 1) #define ffz(x) __ffs( ~(x) ) -- cgit v1.2.3 From dd438e77f01d024919a8ae81d0cf2e4c6cda79cc Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 25 Jul 2008 20:55:52 +0100 Subject: [ARM] pci: provide dummy pci_get_legacy_ide_irq() This fixes footbridge_defconfig: drivers/pnp/resource.c: In function 'pci_dev_uses_irq': drivers/pnp/resource.c:317: error: implicit declaration of function 'pci_get_legacy_ide_irq' Signed-off-by: Russell King --- include/asm-arm/pci.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h index 75feb1574a6..2d84792f2e1 100644 --- a/include/asm-arm/pci.h +++ b/include/asm-arm/pci.h @@ -78,6 +78,14 @@ pcibios_select_root(struct pci_dev *pdev, struct resource *res) return root; } +/* + * Dummy implementation; always return 0. + */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return 0; +} + #endif /* __KERNEL__ */ #endif -- cgit v1.2.3 From 8d8bb39b9eba32dd70e87fd5ad5c5dd4ba118e06 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 25 Jul 2008 19:44:49 -0700 Subject: dma-mapping: add the device argument to dma_mapping_error() Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori Cc: Muli Ben-Yehuda Cc: Andi Kleen Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/dma-mapping.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h index e99406a7bec..f41335ba633 100644 --- a/include/asm-arm/dma-mapping.h +++ b/include/asm-arm/dma-mapping.h @@ -56,7 +56,7 @@ static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) /* * DMA errors are defined by all-bits-set in the DMA address. */ -static inline int dma_mapping_error(dma_addr_t dma_addr) +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return dma_addr == ~0; } -- cgit v1.2.3 From 19fd6231279be3c3bdd02ed99f9b0eb195978064 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 25 Jul 2008 19:45:32 -0700 Subject: mm: spinlock tree_lock mapping->tree_lock has no read lockers. convert the lock from an rwlock to a spinlock. Signed-off-by: Nick Piggin Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Hugh Dickins Cc: "Paul E. McKenney" Reviewed-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/cacheflush.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 70b0fe724b6..03cf1ee977b 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -424,9 +424,9 @@ static inline void flush_anon_page(struct vm_area_struct *vma, } #define flush_dcache_mmap_lock(mapping) \ - write_lock_irq(&(mapping)->tree_lock) + spin_lock_irq(&(mapping)->tree_lock) #define flush_dcache_mmap_unlock(mapping) \ - write_unlock_irq(&(mapping)->tree_lock) + spin_unlock_irq(&(mapping)->tree_lock) #define flush_icache_user_range(vma,page,addr,len) \ flush_dcache_page(page) -- cgit v1.2.3 From aafe0ad81d7458b6c61eeb39068432683c70c9a9 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Sat, 12 Jul 2008 11:55:42 +0100 Subject: [ARM] pxa: PXA25x UDC - Fix warning during build Fixes an unterminated ' warning building PXA25X UDC. Signed-off-by: Ian Molton --- include/asm-arm/arch-pxa/pxa25x-udc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h index 840305916b6..1b80a4805a6 100644 --- a/include/asm-arm/arch-pxa/pxa25x-udc.h +++ b/include/asm-arm/arch-pxa/pxa25x-udc.h @@ -2,7 +2,7 @@ #define _ASM_ARCH_PXA25X_UDC_H #ifdef _ASM_ARCH_PXA27X_UDC_H -#error You can't include both PXA25x and PXA27x UDC support +#error "You can't include both PXA25x and PXA27x UDC support" #endif #define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -- cgit v1.2.3 From 7f2da1e7d0330395e5e9e350b879b98a1ea495df Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 10 May 2008 20:44:54 -0400 Subject: [PATCH] kill altroot long overdue... Signed-off-by: Al Viro --- include/asm-arm/namei.h | 25 ------------------------- 1 file changed, 25 deletions(-) delete mode 100644 include/asm-arm/namei.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/namei.h b/include/asm-arm/namei.h deleted file mode 100644 index a402d3b9d0f..00000000000 --- a/include/asm-arm/namei.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * linux/include/asm-arm/namei.h - * - * Routines to handle famous /usr/gnemul - * Derived from the Sparc version of this file - * - * Included from linux/fs/namei.c - */ - -#ifndef __ASMARM_NAMEI_H -#define __ASMARM_NAMEI_H - -#define ARM_BSD_EMUL "usr/gnemul/bsd/" - -static inline char *__emul_prefix(void) -{ - switch (current->personality) { - case PER_BSD: - return ARM_BSD_EMUL; - default: - return NULL; - } -} - -#endif /* __ASMARM_NAMEI_H */ -- cgit v1.2.3 From 6cab48602996cdbcb277375a8107d53e21e8c9b9 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 27 Jul 2008 04:23:31 +0100 Subject: [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_* IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- include/asm-arm/arch-pnx4008/irqs.h | 48 ++++++++++++++--------------- include/asm-arm/arch-pxa/idp.h | 10 +++--- include/asm-arm/arch-pxa/pcm990_baseboard.h | 14 ++++----- include/asm-arm/arch-sa1100/ide.h | 2 +- include/asm-arm/irq.h | 17 ---------- 5 files changed, 37 insertions(+), 54 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h index 13ec7ed0f50..a25d18f2d87 100644 --- a/include/asm-arm/arch-pnx4008/irqs.h +++ b/include/asm-arm/arch-pnx4008/irqs.h @@ -135,30 +135,30 @@ #define PNX4008_IRQ_TYPES \ { /*IRQ #'s: */ \ -IRQT_LOW, IRQT_LOW, IRQT_LOW, IRQT_HIGH, /* 0, 1, 2, 3 */ \ -IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 4, 5, 6, 7 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 8, 9,10,11 */ \ -IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 28,29,30,31 */ \ -IRQT_HIGH, IRQT_LOW, IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 48,49,50,51 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_HIGH, /* 56,57,58,59 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */ \ +IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \ +IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \ +IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \ } /* Start Enable Pin Interrupts - table 58 page 66 */ diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h index b6952534a4e..21aa8ac35c1 100644 --- a/include/asm-arm/arch-pxa/idp.h +++ b/include/asm-arm/arch-pxa/idp.h @@ -138,18 +138,18 @@ #define TOUCH_PANEL_IRQ IRQ_GPIO(5) #define IDE_IRQ IRQ_GPIO(21) -#define TOUCH_PANEL_IRQ_EDGE IRQT_FALLING +#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define ETHERNET_IRQ IRQ_GPIO(4) -#define ETHERNET_IRQ_EDGE IRQT_RISING +#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define IDE_IRQ_EDGE IRQT_RISING +#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCMCIA_S0_CD_VALID IRQ_GPIO(7) -#define PCMCIA_S0_CD_VALID_EDGE IRQT_BOTHEDGE +#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH #define PCMCIA_S1_CD_VALID IRQ_GPIO(8) -#define PCMCIA_S1_CD_VALID_EDGE IRQT_BOTHEDGE +#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH #define PCMCIA_S0_RDYINT IRQ_GPIO(19) #define PCMCIA_S1_RDYINT IRQ_GPIO(22) diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h index b699d0d7bdb..2e201317906 100644 --- a/include/asm-arm/arch-pxa/pcm990_baseboard.h +++ b/include/asm-arm/arch-pxa/pcm990_baseboard.h @@ -29,14 +29,14 @@ /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ #define PCM990_CTRL_INT_IRQ_GPIO 9 #define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) -#define PCM990_CTRL_INT_IRQ_EDGE IRQT_RISING +#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ #define PCM990_CTRL_BASE 0xea000000 #define PCM990_CTRL_SIZE (1*1024*1024) #define PCM990_CTRL_PWR_IRQ_GPIO 14 #define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) -#define PCM990_CTRL_PWR_IRQ_EDGE IRQT_RISING +#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* visible CPLD (U7) registers */ #define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ @@ -133,7 +133,7 @@ */ #define PCM990_IDE_IRQ_GPIO 13 #define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) -#define PCM990_IDE_IRQ_EDGE IRQT_RISING +#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ #define PCM990_IDE_PLD_BASE 0xee000000 #define PCM990_IDE_PLD_SIZE (1*1024*1024) @@ -189,11 +189,11 @@ */ #define PCM990_CF_IRQ_GPIO 11 #define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) -#define PCM990_CF_IRQ_EDGE IRQT_RISING +#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_CD_GPIO 12 #define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) -#define PCM990_CF_CD_EDGE IRQT_RISING +#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ #define PCM990_CF_PLD_BASE 0xef000000 @@ -259,14 +259,14 @@ */ #define PCM990_AC97_IRQ_GPIO 10 #define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) -#define PCM990_AC97_IRQ_EDGE IRQT_RISING +#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* * MMC phyCORE */ #define PCM990_MMC0_IRQ_GPIO 9 #define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) -#define PCM990_MMC0_IRQ_EDGE IRQT_FALLING +#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING /* * USB phyCore diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h index b14cbda01dc..193f6c15f4d 100644 --- a/include/asm-arm/arch-sa1100/ide.h +++ b/include/asm-arm/arch-sa1100/ide.h @@ -61,7 +61,7 @@ ide_init_default_hwifs(void) /* Enable GPIO as interrupt line */ GPDR &= ~LART_GPIO_IDE; - set_irq_type(LART_IRQ_IDE, IRQT_RISING); + set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING); /* set PCMCIA interface timing */ MECR = 0x00060006; diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h index 1b882a255e3..9cb01907e43 100644 --- a/include/asm-arm/irq.h +++ b/include/asm-arm/irq.h @@ -19,23 +19,6 @@ #define NO_IRQ ((unsigned int)(-1)) #endif - -/* - * Migration helpers - */ -#define __IRQT_FALEDGE IRQ_TYPE_EDGE_FALLING -#define __IRQT_RISEDGE IRQ_TYPE_EDGE_RISING -#define __IRQT_LOWLVL IRQ_TYPE_LEVEL_LOW -#define __IRQT_HIGHLVL IRQ_TYPE_LEVEL_HIGH - -#define IRQT_NOEDGE (0) -#define IRQT_RISING (__IRQT_RISEDGE) -#define IRQT_FALLING (__IRQT_FALEDGE) -#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE) -#define IRQT_LOW (__IRQT_LOWLVL) -#define IRQT_HIGH (__IRQT_HIGHLVL) -#define IRQT_PROBE IRQ_TYPE_PROBE - #ifndef __ASSEMBLY__ struct irqaction; extern void migrate_irqs(void); -- cgit v1.2.3 From daf93dd55c48b65ab2f1907e0fc5ef994896c787 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Jul 2008 10:10:58 +0100 Subject: [ARM] fix VIPT/VIVT macro optimisations, add comments cacheflush.h was doing: ... VIVT only stuff ... VIPT only stuff ... VIVT or VIPT stuff which is clearly bogus - we would only ever use the "VIVT or VIPT" case when both VIVT and VIPT are not selected. Fix this. Add comments to each case, including noting the impossibility of correctly detecting the cache type of ARM926 and ARMv6 cores from the cache type register in the "VIVT or VIPT" case. Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 03cf1ee977b..e68a1cbcc85 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -459,15 +459,19 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, #define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0) #if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT) - +/* + * VIVT caches only + */ #define cache_is_vivt() 1 #define cache_is_vipt() 0 #define cache_is_vipt_nonaliasing() 0 #define cache_is_vipt_aliasing() 0 #define icache_is_vivt_asid_tagged() 0 -#elif defined(CONFIG_CPU_CACHE_VIPT) - +#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT) +/* + * VIPT caches only + */ #define cache_is_vivt() 0 #define cache_is_vipt() 1 #define cache_is_vipt_nonaliasing() \ @@ -489,7 +493,12 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, }) #else - +/* + * VIVT or VIPT caches. Note that this is unreliable since ARM926 + * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test. + * There's no way to tell from the CacheType register what type (!) + * the cache is. + */ #define cache_is_vivt() \ ({ \ unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ -- cgit v1.2.3 From 399dee2371787825a1845de87c0cbee7b7c30ad6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 28 Jul 2008 12:04:06 +0100 Subject: i2c: S3C2410: Pass the I2C bus number via drivers platform data Allow the platform data to specify the bus bumber that the new I2C bus will be given. This is to allow the use of the board registration mechanism to specify the new style of I2C device registration which allows boards to provide a list of attached devices. Note, as discussed on the mailing list, we have dropped backwards compatibility of adding an dynamic bus number as it should not affect most boards to have the bus pinned to 0 if they have either not specified platform data for driver. Any board supplying platform data will automatically have the bus_num field set to 0, and anyone who needs the driver on a different bus number can supply platform data to set bus_num. Signed-off-by: Ben Dooks --- include/asm-arm/plat-s3c/iic.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h index 71211c8b538..d08a1f2863e 100644 --- a/include/asm-arm/plat-s3c/iic.h +++ b/include/asm-arm/plat-s3c/iic.h @@ -21,6 +21,7 @@ */ struct s3c2410_platform_i2c { + int bus_num; /* bus number to use */ unsigned int flags; unsigned int slave_addr; /* slave address for controller */ unsigned long bus_freq; /* standard bus frequency */ -- cgit v1.2.3 From cb1d0a7a5d2e537f2f6ada22883abee1762e94b2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 28 Jul 2008 15:46:33 -0700 Subject: spi_s3c24xx: really assign busnum The original "Pass the bus number we expect the S3C24XX SPI driver to attach to via the platform data." [1] patch was mis-sent, and missed two important parts of the diff, which was to actually set the bus_num field and add the relevant field to the platform data. The previous commit 50f426b55d919dd017af35bb6a08753d1f262920 promised to add a bus_num field, but failed to include the two hunks that added this field to include/asm-arm/arch-s3c2410/spi.h and then pass it to the spi core when creating the new master field in drivers/spi/spi_s3c24xx.c. [1] git commit 50f426b55d919dd017af35bb6a08753d1f262920 Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/arch-s3c2410/spi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h index 352d33860b6..442169887d3 100644 --- a/include/asm-arm/arch-s3c2410/spi.h +++ b/include/asm-arm/arch-s3c2410/spi.h @@ -16,6 +16,7 @@ struct s3c2410_spi_info { unsigned long pin_cs; /* simple gpio cs */ unsigned int num_cs; /* total chipselects */ + int bus_num; /* bus number to use. */ void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; -- cgit v1.2.3 From 4baa9922430662431231ac637adedddbb0cfb2d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 10:55:55 +0100 Subject: [ARM] move include/asm-arm to arch/arm/include/asm Move platform independent header files to arch/arm/include/asm, leaving those in asm/arch* and asm/plat* alone. Signed-off-by: Russell King --- include/asm-arm/Kbuild | 3 - include/asm-arm/a.out-core.h | 49 -- include/asm-arm/a.out.h | 34 -- include/asm-arm/assembler.h | 116 ---- include/asm-arm/atomic.h | 212 ------- include/asm-arm/auxvec.h | 4 - include/asm-arm/bitops.h | 340 ----------- include/asm-arm/bug.h | 24 - include/asm-arm/bugs.h | 21 - include/asm-arm/byteorder.h | 58 -- include/asm-arm/cache.h | 10 - include/asm-arm/cacheflush.h | 537 ----------------- include/asm-arm/checksum.h | 139 ----- include/asm-arm/cnt32_to_63.h | 78 --- include/asm-arm/cpu-multi32.h | 69 --- include/asm-arm/cpu-single.h | 44 -- include/asm-arm/cpu.h | 25 - include/asm-arm/cputime.h | 6 - include/asm-arm/current.h | 15 - include/asm-arm/delay.h | 44 -- include/asm-arm/device.h | 15 - include/asm-arm/div64.h | 227 ------- include/asm-arm/dma-mapping.h | 456 -------------- include/asm-arm/dma.h | 143 ----- include/asm-arm/domain.h | 78 --- include/asm-arm/ecard.h | 219 ------- include/asm-arm/elf.h | 116 ---- include/asm-arm/emergency-restart.h | 6 - include/asm-arm/errno.h | 6 - include/asm-arm/fb.h | 19 - include/asm-arm/fcntl.h | 11 - include/asm-arm/fiq.h | 37 -- include/asm-arm/flat.h | 19 - include/asm-arm/floppy.h | 148 ----- include/asm-arm/fpstate.h | 93 --- include/asm-arm/ftrace.h | 14 - include/asm-arm/futex.h | 6 - include/asm-arm/glue.h | 149 ----- include/asm-arm/gpio.h | 7 - include/asm-arm/hardirq.h | 32 - include/asm-arm/hardware.h | 18 - include/asm-arm/hardware/arm_timer.h | 21 - include/asm-arm/hardware/arm_twd.h | 21 - include/asm-arm/hardware/cache-l2x0.h | 56 -- include/asm-arm/hardware/clps7111.h | 184 ------ include/asm-arm/hardware/cs89712.h | 49 -- include/asm-arm/hardware/debug-8250.S | 29 - include/asm-arm/hardware/debug-pl01x.S | 29 - include/asm-arm/hardware/dec21285.h | 147 ----- include/asm-arm/hardware/entry-macro-iomd.S | 139 ----- include/asm-arm/hardware/ep7211.h | 40 -- include/asm-arm/hardware/ep7212.h | 83 --- include/asm-arm/hardware/gic.h | 42 -- include/asm-arm/hardware/icst307.h | 38 -- include/asm-arm/hardware/icst525.h | 36 -- include/asm-arm/hardware/ioc.h | 72 --- include/asm-arm/hardware/iomd.h | 226 ------- include/asm-arm/hardware/iop3xx-adma.h | 888 ---------------------------- include/asm-arm/hardware/iop3xx-gpio.h | 73 --- include/asm-arm/hardware/iop3xx.h | 312 ---------- include/asm-arm/hardware/iop_adma.h | 116 ---- include/asm-arm/hardware/it8152.h | 99 ---- include/asm-arm/hardware/linkup-l1110.h | 48 -- include/asm-arm/hardware/locomo.h | 217 ------- include/asm-arm/hardware/memc.h | 26 - include/asm-arm/hardware/pci_v3.h | 186 ------ include/asm-arm/hardware/sa1111.h | 581 ------------------ include/asm-arm/hardware/scoop.h | 69 --- include/asm-arm/hardware/sharpsl_pm.h | 106 ---- include/asm-arm/hardware/ssp.h | 28 - include/asm-arm/hardware/uengine.h | 62 -- include/asm-arm/hardware/vic.h | 45 -- include/asm-arm/hw_irq.h | 9 - include/asm-arm/hwcap.h | 29 - include/asm-arm/ide.h | 23 - include/asm-arm/io.h | 287 --------- include/asm-arm/ioctl.h | 1 - include/asm-arm/ioctls.h | 84 --- include/asm-arm/ipcbuf.h | 29 - include/asm-arm/irq.h | 28 - include/asm-arm/irq_regs.h | 1 - include/asm-arm/irqflags.h | 132 ----- include/asm-arm/kdebug.h | 1 - include/asm-arm/kexec.h | 31 - include/asm-arm/kgdb.h | 104 ---- include/asm-arm/kmap_types.h | 24 - include/asm-arm/kprobes.h | 79 --- include/asm-arm/leds.h | 50 -- include/asm-arm/limits.h | 11 - include/asm-arm/linkage.h | 11 - include/asm-arm/local.h | 1 - include/asm-arm/locks.h | 274 --------- include/asm-arm/mach/arch.h | 60 -- include/asm-arm/mach/dma.h | 57 -- include/asm-arm/mach/flash.h | 39 -- include/asm-arm/mach/irda.h | 20 - include/asm-arm/mach/irq.h | 54 -- include/asm-arm/mach/map.h | 36 -- include/asm-arm/mach/mmc.h | 15 - include/asm-arm/mach/pci.h | 72 --- include/asm-arm/mach/serial_at91.h | 33 -- include/asm-arm/mach/serial_sa1100.h | 31 - include/asm-arm/mach/sharpsl_param.h | 37 -- include/asm-arm/mach/time.h | 57 -- include/asm-arm/mach/udc_pxa2xx.h | 29 - include/asm-arm/mc146818rtc.h | 28 - include/asm-arm/memory.h | 334 ----------- include/asm-arm/mman.h | 17 - include/asm-arm/mmu.h | 33 -- include/asm-arm/mmu_context.h | 117 ---- include/asm-arm/mmzone.h | 30 - include/asm-arm/module.h | 18 - include/asm-arm/msgbuf.h | 31 - include/asm-arm/mtd-xip.h | 26 - include/asm-arm/mutex.h | 127 ---- include/asm-arm/nwflash.h | 9 - include/asm-arm/page-nommu.h | 49 -- include/asm-arm/page.h | 199 ------- include/asm-arm/param.h | 31 - include/asm-arm/parport.h | 18 - include/asm-arm/pci.h | 91 --- include/asm-arm/percpu.h | 6 - include/asm-arm/pgalloc.h | 136 ----- include/asm-arm/pgtable-hwdef.h | 90 --- include/asm-arm/pgtable-nommu.h | 118 ---- include/asm-arm/pgtable.h | 401 ------------- include/asm-arm/poll.h | 1 - include/asm-arm/posix_types.h | 77 --- include/asm-arm/proc-fns.h | 241 -------- include/asm-arm/processor.h | 131 ---- include/asm-arm/procinfo.h | 49 -- include/asm-arm/ptrace.h | 162 ----- include/asm-arm/resource.h | 6 - include/asm-arm/scatterlist.h | 27 - include/asm-arm/sections.h | 1 - include/asm-arm/segment.h | 11 - include/asm-arm/sembuf.h | 25 - include/asm-arm/serial.h | 19 - include/asm-arm/setup.h | 226 ------- include/asm-arm/shmbuf.h | 42 -- include/asm-arm/shmparam.h | 16 - include/asm-arm/sigcontext.h | 34 -- include/asm-arm/siginfo.h | 6 - include/asm-arm/signal.h | 164 ----- include/asm-arm/sizes.h | 56 -- include/asm-arm/smp.h | 147 ----- include/asm-arm/socket.h | 57 -- include/asm-arm/sockios.h | 13 - include/asm-arm/sparsemem.h | 10 - include/asm-arm/spinlock.h | 224 ------- include/asm-arm/spinlock_types.h | 20 - include/asm-arm/stat.h | 87 --- include/asm-arm/statfs.h | 42 -- include/asm-arm/string.h | 50 -- include/asm-arm/suspend.h | 4 - include/asm-arm/system.h | 388 ------------ include/asm-arm/termbits.h | 197 ------ include/asm-arm/termios.h | 92 --- include/asm-arm/therm.h | 28 - include/asm-arm/thread_info.h | 153 ----- include/asm-arm/thread_notify.h | 48 -- include/asm-arm/timex.h | 24 - include/asm-arm/tlb.h | 94 --- include/asm-arm/tlbflush.h | 500 ---------------- include/asm-arm/topology.h | 6 - include/asm-arm/traps.h | 29 - include/asm-arm/types.h | 31 - include/asm-arm/uaccess.h | 444 -------------- include/asm-arm/ucontext.h | 103 ---- include/asm-arm/unaligned.h | 19 - include/asm-arm/unistd.h | 450 -------------- include/asm-arm/user.h | 84 --- include/asm-arm/vfp.h | 84 --- include/asm-arm/vfpmacros.h | 47 -- include/asm-arm/vga.h | 12 - include/asm-arm/xor.h | 141 ----- 176 files changed, 16295 deletions(-) delete mode 100644 include/asm-arm/Kbuild delete mode 100644 include/asm-arm/a.out-core.h delete mode 100644 include/asm-arm/a.out.h delete mode 100644 include/asm-arm/assembler.h delete mode 100644 include/asm-arm/atomic.h delete mode 100644 include/asm-arm/auxvec.h delete mode 100644 include/asm-arm/bitops.h delete mode 100644 include/asm-arm/bug.h delete mode 100644 include/asm-arm/bugs.h delete mode 100644 include/asm-arm/byteorder.h delete mode 100644 include/asm-arm/cache.h delete mode 100644 include/asm-arm/cacheflush.h delete mode 100644 include/asm-arm/checksum.h delete mode 100644 include/asm-arm/cnt32_to_63.h delete mode 100644 include/asm-arm/cpu-multi32.h delete mode 100644 include/asm-arm/cpu-single.h delete mode 100644 include/asm-arm/cpu.h delete mode 100644 include/asm-arm/cputime.h delete mode 100644 include/asm-arm/current.h delete mode 100644 include/asm-arm/delay.h delete mode 100644 include/asm-arm/device.h delete mode 100644 include/asm-arm/div64.h delete mode 100644 include/asm-arm/dma-mapping.h delete mode 100644 include/asm-arm/dma.h delete mode 100644 include/asm-arm/domain.h delete mode 100644 include/asm-arm/ecard.h delete mode 100644 include/asm-arm/elf.h delete mode 100644 include/asm-arm/emergency-restart.h delete mode 100644 include/asm-arm/errno.h delete mode 100644 include/asm-arm/fb.h delete mode 100644 include/asm-arm/fcntl.h delete mode 100644 include/asm-arm/fiq.h delete mode 100644 include/asm-arm/flat.h delete mode 100644 include/asm-arm/floppy.h delete mode 100644 include/asm-arm/fpstate.h delete mode 100644 include/asm-arm/ftrace.h delete mode 100644 include/asm-arm/futex.h delete mode 100644 include/asm-arm/glue.h delete mode 100644 include/asm-arm/gpio.h delete mode 100644 include/asm-arm/hardirq.h delete mode 100644 include/asm-arm/hardware.h delete mode 100644 include/asm-arm/hardware/arm_timer.h delete mode 100644 include/asm-arm/hardware/arm_twd.h delete mode 100644 include/asm-arm/hardware/cache-l2x0.h delete mode 100644 include/asm-arm/hardware/clps7111.h delete mode 100644 include/asm-arm/hardware/cs89712.h delete mode 100644 include/asm-arm/hardware/debug-8250.S delete mode 100644 include/asm-arm/hardware/debug-pl01x.S delete mode 100644 include/asm-arm/hardware/dec21285.h delete mode 100644 include/asm-arm/hardware/entry-macro-iomd.S delete mode 100644 include/asm-arm/hardware/ep7211.h delete mode 100644 include/asm-arm/hardware/ep7212.h delete mode 100644 include/asm-arm/hardware/gic.h delete mode 100644 include/asm-arm/hardware/icst307.h delete mode 100644 include/asm-arm/hardware/icst525.h delete mode 100644 include/asm-arm/hardware/ioc.h delete mode 100644 include/asm-arm/hardware/iomd.h delete mode 100644 include/asm-arm/hardware/iop3xx-adma.h delete mode 100644 include/asm-arm/hardware/iop3xx-gpio.h delete mode 100644 include/asm-arm/hardware/iop3xx.h delete mode 100644 include/asm-arm/hardware/iop_adma.h delete mode 100644 include/asm-arm/hardware/it8152.h delete mode 100644 include/asm-arm/hardware/linkup-l1110.h delete mode 100644 include/asm-arm/hardware/locomo.h delete mode 100644 include/asm-arm/hardware/memc.h delete mode 100644 include/asm-arm/hardware/pci_v3.h delete mode 100644 include/asm-arm/hardware/sa1111.h delete mode 100644 include/asm-arm/hardware/scoop.h delete mode 100644 include/asm-arm/hardware/sharpsl_pm.h delete mode 100644 include/asm-arm/hardware/ssp.h delete mode 100644 include/asm-arm/hardware/uengine.h delete mode 100644 include/asm-arm/hardware/vic.h delete mode 100644 include/asm-arm/hw_irq.h delete mode 100644 include/asm-arm/hwcap.h delete mode 100644 include/asm-arm/ide.h delete mode 100644 include/asm-arm/io.h delete mode 100644 include/asm-arm/ioctl.h delete mode 100644 include/asm-arm/ioctls.h delete mode 100644 include/asm-arm/ipcbuf.h delete mode 100644 include/asm-arm/irq.h delete mode 100644 include/asm-arm/irq_regs.h delete mode 100644 include/asm-arm/irqflags.h delete mode 100644 include/asm-arm/kdebug.h delete mode 100644 include/asm-arm/kexec.h delete mode 100644 include/asm-arm/kgdb.h delete mode 100644 include/asm-arm/kmap_types.h delete mode 100644 include/asm-arm/kprobes.h delete mode 100644 include/asm-arm/leds.h delete mode 100644 include/asm-arm/limits.h delete mode 100644 include/asm-arm/linkage.h delete mode 100644 include/asm-arm/local.h delete mode 100644 include/asm-arm/locks.h delete mode 100644 include/asm-arm/mach/arch.h delete mode 100644 include/asm-arm/mach/dma.h delete mode 100644 include/asm-arm/mach/flash.h delete mode 100644 include/asm-arm/mach/irda.h delete mode 100644 include/asm-arm/mach/irq.h delete mode 100644 include/asm-arm/mach/map.h delete mode 100644 include/asm-arm/mach/mmc.h delete mode 100644 include/asm-arm/mach/pci.h delete mode 100644 include/asm-arm/mach/serial_at91.h delete mode 100644 include/asm-arm/mach/serial_sa1100.h delete mode 100644 include/asm-arm/mach/sharpsl_param.h delete mode 100644 include/asm-arm/mach/time.h delete mode 100644 include/asm-arm/mach/udc_pxa2xx.h delete mode 100644 include/asm-arm/mc146818rtc.h delete mode 100644 include/asm-arm/memory.h delete mode 100644 include/asm-arm/mman.h delete mode 100644 include/asm-arm/mmu.h delete mode 100644 include/asm-arm/mmu_context.h delete mode 100644 include/asm-arm/mmzone.h delete mode 100644 include/asm-arm/module.h delete mode 100644 include/asm-arm/msgbuf.h delete mode 100644 include/asm-arm/mtd-xip.h delete mode 100644 include/asm-arm/mutex.h delete mode 100644 include/asm-arm/nwflash.h delete mode 100644 include/asm-arm/page-nommu.h delete mode 100644 include/asm-arm/page.h delete mode 100644 include/asm-arm/param.h delete mode 100644 include/asm-arm/parport.h delete mode 100644 include/asm-arm/pci.h delete mode 100644 include/asm-arm/percpu.h delete mode 100644 include/asm-arm/pgalloc.h delete mode 100644 include/asm-arm/pgtable-hwdef.h delete mode 100644 include/asm-arm/pgtable-nommu.h delete mode 100644 include/asm-arm/pgtable.h delete mode 100644 include/asm-arm/poll.h delete mode 100644 include/asm-arm/posix_types.h delete mode 100644 include/asm-arm/proc-fns.h delete mode 100644 include/asm-arm/processor.h delete mode 100644 include/asm-arm/procinfo.h delete mode 100644 include/asm-arm/ptrace.h delete mode 100644 include/asm-arm/resource.h delete mode 100644 include/asm-arm/scatterlist.h delete mode 100644 include/asm-arm/sections.h delete mode 100644 include/asm-arm/segment.h delete mode 100644 include/asm-arm/sembuf.h delete mode 100644 include/asm-arm/serial.h delete mode 100644 include/asm-arm/setup.h delete mode 100644 include/asm-arm/shmbuf.h delete mode 100644 include/asm-arm/shmparam.h delete mode 100644 include/asm-arm/sigcontext.h delete mode 100644 include/asm-arm/siginfo.h delete mode 100644 include/asm-arm/signal.h delete mode 100644 include/asm-arm/sizes.h delete mode 100644 include/asm-arm/smp.h delete mode 100644 include/asm-arm/socket.h delete mode 100644 include/asm-arm/sockios.h delete mode 100644 include/asm-arm/sparsemem.h delete mode 100644 include/asm-arm/spinlock.h delete mode 100644 include/asm-arm/spinlock_types.h delete mode 100644 include/asm-arm/stat.h delete mode 100644 include/asm-arm/statfs.h delete mode 100644 include/asm-arm/string.h delete mode 100644 include/asm-arm/suspend.h delete mode 100644 include/asm-arm/system.h delete mode 100644 include/asm-arm/termbits.h delete mode 100644 include/asm-arm/termios.h delete mode 100644 include/asm-arm/therm.h delete mode 100644 include/asm-arm/thread_info.h delete mode 100644 include/asm-arm/thread_notify.h delete mode 100644 include/asm-arm/timex.h delete mode 100644 include/asm-arm/tlb.h delete mode 100644 include/asm-arm/tlbflush.h delete mode 100644 include/asm-arm/topology.h delete mode 100644 include/asm-arm/traps.h delete mode 100644 include/asm-arm/types.h delete mode 100644 include/asm-arm/uaccess.h delete mode 100644 include/asm-arm/ucontext.h delete mode 100644 include/asm-arm/unaligned.h delete mode 100644 include/asm-arm/unistd.h delete mode 100644 include/asm-arm/user.h delete mode 100644 include/asm-arm/vfp.h delete mode 100644 include/asm-arm/vfpmacros.h delete mode 100644 include/asm-arm/vga.h delete mode 100644 include/asm-arm/xor.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/Kbuild b/include/asm-arm/Kbuild deleted file mode 100644 index 73237bd130a..00000000000 --- a/include/asm-arm/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm - -unifdef-y += hwcap.h diff --git a/include/asm-arm/a.out-core.h b/include/asm-arm/a.out-core.h deleted file mode 100644 index 93d04acaa31..00000000000 --- a/include/asm-arm/a.out-core.h +++ /dev/null @@ -1,49 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include -#include - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - struct task_struct *tsk = current; - - dump->magic = CMAGIC; - dump->start_code = tsk->mm->start_code; - dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1); - - dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT; - dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT; - dump->u_ssize = 0; - - dump->u_debugreg[0] = tsk->thread.debug.bp[0].address; - dump->u_debugreg[1] = tsk->thread.debug.bp[1].address; - dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm; - dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm; - dump->u_debugreg[4] = tsk->thread.debug.nsaved; - - if (dump->start_stack < 0x04000000) - dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT; - - dump->regs = *regs; - dump->u_fpvalid = dump_fpu (regs, &dump->u_fp); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/include/asm-arm/a.out.h b/include/asm-arm/a.out.h deleted file mode 100644 index 79489fdcc8b..00000000000 --- a/include/asm-arm/a.out.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ARM_A_OUT_H__ -#define __ARM_A_OUT_H__ - -#include -#include - -struct exec -{ - __u32 a_info; /* Use macros N_MAGIC, etc for access */ - __u32 a_text; /* length of text, in bytes */ - __u32 a_data; /* length of data, in bytes */ - __u32 a_bss; /* length of uninitialized data area for file, in bytes */ - __u32 a_syms; /* length of symbol table data in file, in bytes */ - __u32 a_entry; /* start address */ - __u32 a_trsize; /* length of relocation info for text, in bytes */ - __u32 a_drsize; /* length of relocation info for data, in bytes */ -}; - -/* - * This is always the same - */ -#define N_TXTADDR(a) (0x00008000) - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#define M_ARM 103 - -#ifndef LIBRARY_START_TEXT -#define LIBRARY_START_TEXT (0x00c00000) -#endif - -#endif /* __A_OUT_GNU_H__ */ diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h deleted file mode 100644 index 911393b2c6f..00000000000 --- a/include/asm-arm/assembler.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/assembler.h - * - * Copyright (C) 1996-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains arm architecture specific defines - * for the different processors. - * - * Do not include any C declarations in this file - it is included by - * assembler source. - */ -#ifndef __ASSEMBLY__ -#error "Only include this from assembly code" -#endif - -#include - -/* - * Endian independent macros for shifting bytes within registers. - */ -#ifndef __ARMEB__ -#define pull lsr -#define push lsl -#define get_byte_0 lsl #0 -#define get_byte_1 lsr #8 -#define get_byte_2 lsr #16 -#define get_byte_3 lsr #24 -#define put_byte_0 lsl #0 -#define put_byte_1 lsl #8 -#define put_byte_2 lsl #16 -#define put_byte_3 lsl #24 -#else -#define pull lsl -#define push lsr -#define get_byte_0 lsr #24 -#define get_byte_1 lsr #16 -#define get_byte_2 lsr #8 -#define get_byte_3 lsl #0 -#define put_byte_0 lsl #24 -#define put_byte_1 lsl #16 -#define put_byte_2 lsl #8 -#define put_byte_3 lsl #0 -#endif - -/* - * Data preload for architectures that support it - */ -#if __LINUX_ARM_ARCH__ >= 5 -#define PLD(code...) code -#else -#define PLD(code...) -#endif - -/* - * This can be used to enable code to cacheline align the destination - * pointer when bulk writing to memory. Experiments on StrongARM and - * XScale didn't show this a worthwhile thing to do when the cache is not - * set to write-allocate (this would need further testing on XScale when WA - * is used). - * - * On Feroceon there is much to gain however, regardless of cache mode. - */ -#ifdef CONFIG_CPU_FEROCEON -#define CALGN(code...) code -#else -#define CALGN(code...) -#endif - -/* - * Enable and disable interrupts - */ -#if __LINUX_ARM_ARCH__ >= 6 - .macro disable_irq - cpsid i - .endm - - .macro enable_irq - cpsie i - .endm -#else - .macro disable_irq - msr cpsr_c, #PSR_I_BIT | SVC_MODE - .endm - - .macro enable_irq - msr cpsr_c, #SVC_MODE - .endm -#endif - -/* - * Save the current IRQ state and disable IRQs. Note that this macro - * assumes FIQs are enabled, and that the processor is in SVC mode. - */ - .macro save_and_disable_irqs, oldcpsr - mrs \oldcpsr, cpsr - disable_irq - .endm - -/* - * Restore interrupt state previously stored in a register. We don't - * guarantee that this will preserve the flags. - */ - .macro restore_irqs, oldcpsr - msr cpsr_c, \oldcpsr - .endm - -#define USER(x...) \ -9999: x; \ - .section __ex_table,"a"; \ - .align 3; \ - .long 9999b,9001f; \ - .previous diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h deleted file mode 100644 index 3b59f94b5a3..00000000000 --- a/include/asm-arm/atomic.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - * linux/include/asm-arm/atomic.h - * - * Copyright (C) 1996 Russell King. - * Copyright (C) 2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_ATOMIC_H -#define __ASM_ARM_ATOMIC_H - -#include -#include - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -#define atomic_read(v) ((v)->counter) - -#if __LINUX_ARM_ARCH__ >= 6 - -/* - * ARMv6 UP and SMP safe atomic ops. We use load exclusive and - * store exclusive to ensure that these are atomic. We may loop - * to ensure that the update happens. Writing to 'v->counter' - * without using the following operations WILL break the atomic - * nature of these ops. - */ -static inline void atomic_set(atomic_t *v, int i) -{ - unsigned long tmp; - - __asm__ __volatile__("@ atomic_set\n" -"1: ldrex %0, [%1]\n" -" strex %0, %2, [%1]\n" -" teq %0, #0\n" -" bne 1b" - : "=&r" (tmp) - : "r" (&v->counter), "r" (i) - : "cc"); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - __asm__ __volatile__("@ atomic_add_return\n" -"1: ldrex %0, [%2]\n" -" add %0, %0, %3\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp) - : "r" (&v->counter), "Ir" (i) - : "cc"); - - return result; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - __asm__ __volatile__("@ atomic_sub_return\n" -"1: ldrex %0, [%2]\n" -" sub %0, %0, %3\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp) - : "r" (&v->counter), "Ir" (i) - : "cc"); - - return result; -} - -static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) -{ - unsigned long oldval, res; - - do { - __asm__ __volatile__("@ atomic_cmpxchg\n" - "ldrex %1, [%2]\n" - "mov %0, #0\n" - "teq %1, %3\n" - "strexeq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (&ptr->counter), "Ir" (old), "r" (new) - : "cc"); - } while (res); - - return oldval; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long tmp, tmp2; - - __asm__ __volatile__("@ atomic_clear_mask\n" -"1: ldrex %0, [%2]\n" -" bic %0, %0, %3\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (tmp), "=&r" (tmp2) - : "r" (addr), "Ir" (mask) - : "cc"); -} - -#else /* ARM_ARCH_6 */ - -#include - -#ifdef CONFIG_SMP -#error SMP not supported on pre-ARMv6 CPUs -#endif - -#define atomic_set(v,i) (((v)->counter) = (i)) - -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - raw_local_irq_save(flags); - val = v->counter; - v->counter = val += i; - raw_local_irq_restore(flags); - - return val; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - raw_local_irq_save(flags); - val = v->counter; - v->counter = val -= i; - raw_local_irq_restore(flags); - - return val; -} - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - raw_local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - raw_local_irq_restore(flags); - - return ret; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - raw_local_irq_save(flags); - *addr &= ~mask; - raw_local_irq_restore(flags); -} - -#endif /* __LINUX_ARM_ARCH__ */ - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - - c = atomic_read(v); - while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) - c = old; - return c != u; -} -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_add(i, v) (void) atomic_add_return(i, v) -#define atomic_inc(v) (void) atomic_add_return(1, v) -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) -#define atomic_dec(v) (void) atomic_sub_return(1, v) - -#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) -#define atomic_inc_return(v) (atomic_add_return(1, v)) -#define atomic_dec_return(v) (atomic_sub_return(1, v)) -#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) - -#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) - -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif -#endif diff --git a/include/asm-arm/auxvec.h b/include/asm-arm/auxvec.h deleted file mode 100644 index c0536f6b29a..00000000000 --- a/include/asm-arm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMARM_AUXVEC_H -#define __ASMARM_AUXVEC_H - -#endif diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h deleted file mode 100644 index 9a1db20e032..00000000000 --- a/include/asm-arm/bitops.h +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Copyright 1995, Russell King. - * Various bits and pieces copyrights include: - * Linus Torvalds (test_bit). - * Big endian support: Copyright 2001, Nicolas Pitre - * reworked by rmk. - * - * bit 0 is the LSB of an "unsigned long" quantity. - * - * Please note that the code in this file should never be included - * from user space. Many of these are not implemented in assembler - * since they would be too costly. Also, they require privileged - * instructions (which are not available from user mode) to ensure - * that they are atomic. - */ - -#ifndef __ASM_ARM_BITOPS_H -#define __ASM_ARM_BITOPS_H - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include - -#define smp_mb__before_clear_bit() mb() -#define smp_mb__after_clear_bit() mb() - -/* - * These functions are the basis of our bit ops. - * - * First, the atomic bitops. These use native endian. - */ -static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - *p |= mask; - raw_local_irq_restore(flags); -} - -static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - *p &= ~mask; - raw_local_irq_restore(flags); -} - -static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - *p ^= mask; - raw_local_irq_restore(flags); -} - -static inline int -____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned int res; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - res = *p; - *p = res | mask; - raw_local_irq_restore(flags); - - return res & mask; -} - -static inline int -____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned int res; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - res = *p; - *p = res & ~mask; - raw_local_irq_restore(flags); - - return res & mask; -} - -static inline int -____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned int res; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - res = *p; - *p = res ^ mask; - raw_local_irq_restore(flags); - - return res & mask; -} - -#include - -/* - * A note about Endian-ness. - * ------------------------- - * - * When the ARM is put into big endian mode via CR15, the processor - * merely swaps the order of bytes within words, thus: - * - * ------------ physical data bus bits ----------- - * D31 ... D24 D23 ... D16 D15 ... D8 D7 ... D0 - * little byte 3 byte 2 byte 1 byte 0 - * big byte 0 byte 1 byte 2 byte 3 - * - * This means that reading a 32-bit word at address 0 returns the same - * value irrespective of the endian mode bit. - * - * Peripheral devices should be connected with the data bus reversed in - * "Big Endian" mode. ARM Application Note 61 is applicable, and is - * available from http://www.arm.com/. - * - * The following assumes that the data bus connectivity for big endian - * mode has been followed. - * - * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0. - */ - -/* - * Little endian assembly bitops. nr = 0 -> byte 0 bit 0. - */ -extern void _set_bit_le(int nr, volatile unsigned long * p); -extern void _clear_bit_le(int nr, volatile unsigned long * p); -extern void _change_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_set_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_change_bit_le(int nr, volatile unsigned long * p); -extern int _find_first_zero_bit_le(const void * p, unsigned size); -extern int _find_next_zero_bit_le(const void * p, int size, int offset); -extern int _find_first_bit_le(const unsigned long *p, unsigned size); -extern int _find_next_bit_le(const unsigned long *p, int size, int offset); - -/* - * Big endian assembly bitops. nr = 0 -> byte 3 bit 0. - */ -extern void _set_bit_be(int nr, volatile unsigned long * p); -extern void _clear_bit_be(int nr, volatile unsigned long * p); -extern void _change_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_set_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_change_bit_be(int nr, volatile unsigned long * p); -extern int _find_first_zero_bit_be(const void * p, unsigned size); -extern int _find_next_zero_bit_be(const void * p, int size, int offset); -extern int _find_first_bit_be(const unsigned long *p, unsigned size); -extern int _find_next_bit_be(const unsigned long *p, int size, int offset); - -#ifndef CONFIG_SMP -/* - * The __* form of bitops are non-atomic and may be reordered. - */ -#define ATOMIC_BITOP_LE(name,nr,p) \ - (__builtin_constant_p(nr) ? \ - ____atomic_##name(nr, p) : \ - _##name##_le(nr,p)) - -#define ATOMIC_BITOP_BE(name,nr,p) \ - (__builtin_constant_p(nr) ? \ - ____atomic_##name(nr, p) : \ - _##name##_be(nr,p)) -#else -#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p) -#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p) -#endif - -#define NONATOMIC_BITOP(name,nr,p) \ - (____nonatomic_##name(nr, p)) - -#ifndef __ARMEB__ -/* - * These are the little endian, atomic definitions. - */ -#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p) -#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p) -#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p) -#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p) -#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p) -#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p) -#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz) -#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off) -#define find_first_bit(p,sz) _find_first_bit_le(p,sz) -#define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) - -#define WORD_BITOFF_TO_LE(x) ((x)) - -#else - -/* - * These are the big endian, atomic definitions. - */ -#define set_bit(nr,p) ATOMIC_BITOP_BE(set_bit,nr,p) -#define clear_bit(nr,p) ATOMIC_BITOP_BE(clear_bit,nr,p) -#define change_bit(nr,p) ATOMIC_BITOP_BE(change_bit,nr,p) -#define test_and_set_bit(nr,p) ATOMIC_BITOP_BE(test_and_set_bit,nr,p) -#define test_and_clear_bit(nr,p) ATOMIC_BITOP_BE(test_and_clear_bit,nr,p) -#define test_and_change_bit(nr,p) ATOMIC_BITOP_BE(test_and_change_bit,nr,p) -#define find_first_zero_bit(p,sz) _find_first_zero_bit_be(p,sz) -#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_be(p,sz,off) -#define find_first_bit(p,sz) _find_first_bit_be(p,sz) -#define find_next_bit(p,sz,off) _find_next_bit_be(p,sz,off) - -#define WORD_BITOFF_TO_LE(x) ((x) ^ 0x18) - -#endif - -#if __LINUX_ARM_ARCH__ < 5 - -#include -#include -#include -#include - -#else - -static inline int constant_fls(int x) -{ - int r = 32; - - if (!x) - return 0; - if (!(x & 0xffff0000u)) { - x <<= 16; - r -= 16; - } - if (!(x & 0xff000000u)) { - x <<= 8; - r -= 8; - } - if (!(x & 0xf0000000u)) { - x <<= 4; - r -= 4; - } - if (!(x & 0xc0000000u)) { - x <<= 2; - r -= 2; - } - if (!(x & 0x80000000u)) { - x <<= 1; - r -= 1; - } - return r; -} - -/* - * On ARMv5 and above those functions can be implemented around - * the clz instruction for much better code efficiency. - */ - -#define __fls(x) \ - ( __builtin_constant_p(x) ? constant_fls(x) : \ - ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) - -/* Implement fls() in C so that 64-bit args are suitably truncated */ -static inline int fls(int x) -{ - return __fls(x); -} - -#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) -#define __ffs(x) (ffs(x) - 1) -#define ffz(x) __ffs( ~(x) ) - -#endif - -#include - -#include -#include -#include - -/* - * Ext2 is defined to use little-endian byte ordering. - * These do not need to be atomic. - */ -#define ext2_set_bit(nr,p) \ - __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_set_bit_atomic(lock,nr,p) \ - test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_clear_bit(nr,p) \ - __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_clear_bit_atomic(lock,nr,p) \ - test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_test_bit(nr,p) \ - test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_find_first_zero_bit(p,sz) \ - _find_first_zero_bit_le(p,sz) -#define ext2_find_next_zero_bit(p,sz,off) \ - _find_next_zero_bit_le(p,sz,off) -#define ext2_find_next_bit(p, sz, off) \ - _find_next_bit_le(p, sz, off) - -/* - * Minix is defined to use little-endian byte ordering. - * These do not need to be atomic. - */ -#define minix_set_bit(nr,p) \ - __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_bit(nr,p) \ - test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_and_set_bit(nr,p) \ - __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_and_clear_bit(nr,p) \ - __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_find_first_zero_bit(p,sz) \ - _find_first_zero_bit_le(p,sz) - -#endif /* __KERNEL__ */ - -#endif /* _ARM_BITOPS_H */ diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h deleted file mode 100644 index 7b62351f097..00000000000 --- a/include/asm-arm/bug.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASMARM_BUG_H -#define _ASMARM_BUG_H - - -#ifdef CONFIG_BUG -#ifdef CONFIG_DEBUG_BUGVERBOSE -extern void __bug(const char *file, int line) __attribute__((noreturn)); - -/* give file/line information */ -#define BUG() __bug(__FILE__, __LINE__) - -#else - -/* this just causes an oops */ -#define BUG() (*(int *)0 = 0) - -#endif - -#define HAVE_ARCH_BUG -#endif - -#include - -#endif diff --git a/include/asm-arm/bugs.h b/include/asm-arm/bugs.h deleted file mode 100644 index ca54eb0f12d..00000000000 --- a/include/asm-arm/bugs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/bugs.h - * - * Copyright (C) 1995-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_BUGS_H -#define __ASM_BUGS_H - -#ifdef CONFIG_MMU -extern void check_writebuffer_bugs(void); - -#define check_bugs() check_writebuffer_bugs() -#else -#define check_bugs() do { } while (0) -#endif - -#endif diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h deleted file mode 100644 index e6f7fcdc73b..00000000000 --- a/include/asm-arm/byteorder.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/include/asm-arm/byteorder.h - * - * ARM Endian-ness. In little endian mode, the data bus is connected such - * that byte accesses appear as: - * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 - * and word accesses (data or instruction) appear as: - * d0...d31 - * - * When in big endian mode, byte accesses appear as: - * 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7 - * and word accesses (data or instruction) appear as: - * d0...d31 - */ -#ifndef __ASM_ARM_BYTEORDER_H -#define __ASM_ARM_BYTEORDER_H - -#include -#include - -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __u32 t; - -#ifndef __thumb__ - if (!__builtin_constant_p(x)) { - /* - * The compiler needs a bit of a hint here to always do the - * right thing and not screw it up to different degrees - * depending on the gcc version. - */ - asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); - } else -#endif - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ - - x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ - t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ - x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ - - return x; -} - -#define __arch__swab32(x) ___arch__swab32(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __ARMEB__ -#include -#else -#include -#endif - -#endif - diff --git a/include/asm-arm/cache.h b/include/asm-arm/cache.h deleted file mode 100644 index 31332c8ac04..00000000000 --- a/include/asm-arm/cache.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/cache.h - */ -#ifndef __ASMARM_CACHE_H -#define __ASMARM_CACHE_H - -#define L1_CACHE_SHIFT 5 -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#endif diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h deleted file mode 100644 index e68a1cbcc85..00000000000 --- a/include/asm-arm/cacheflush.h +++ /dev/null @@ -1,537 +0,0 @@ -/* - * linux/include/asm-arm/cacheflush.h - * - * Copyright (C) 1999-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_CACHEFLUSH_H -#define _ASMARM_CACHEFLUSH_H - -#include -#include - -#include -#include - -#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) - -/* - * Cache Model - * =========== - */ -#undef _CACHE -#undef MULTI_CACHE - -#if defined(CONFIG_CPU_CACHE_V3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v3 -# endif -#endif - -#if defined(CONFIG_CPU_CACHE_V4) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v4 -# endif -#endif - -#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ - defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) -# define MULTI_CACHE 1 -#endif - -#if defined(CONFIG_CPU_ARM926T) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm926 -# endif -#endif - -#if defined(CONFIG_CPU_ARM940T) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm940 -# endif -#endif - -#if defined(CONFIG_CPU_ARM946E) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm946 -# endif -#endif - -#if defined(CONFIG_CPU_CACHE_V4WB) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v4wb -# endif -#endif - -#if defined(CONFIG_CPU_XSCALE) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE xscale -# endif -#endif - -#if defined(CONFIG_CPU_XSC3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE xsc3 -# endif -#endif - -#if defined(CONFIG_CPU_FEROCEON) -# define MULTI_CACHE 1 -#endif - -#if defined(CONFIG_CPU_V6) -//# ifdef _CACHE -# define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif -#endif - -#if defined(CONFIG_CPU_V7) -//# ifdef _CACHE -# define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif -#endif - -#if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model -#endif - -/* - * This flag is used to indicate that the page pointed to by a pte - * is dirty and requires cleaning before returning it to the user. - */ -#define PG_dcache_dirty PG_arch_1 - -/* - * MM Cache Management - * =================== - * - * The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files - * implement these methods. - * - * Start addresses are inclusive and end addresses are exclusive; - * start addresses should be rounded down, end addresses up. - * - * See Documentation/cachetlb.txt for more information. - * Please note that the implementation of these, and the required - * effects are cache-type (VIVT/VIPT/PIPT) specific. - * - * flush_cache_kern_all() - * - * Unconditionally clean and invalidate the entire cache. - * - * flush_cache_user_mm(mm) - * - * Clean and invalidate all user space cache entries - * before a change of page tables. - * - * flush_cache_user_range(start, end, flags) - * - * Clean and invalidate a range of cache entries in the - * specified address space before a change of page tables. - * - start - user start address (inclusive, page aligned) - * - end - user end address (exclusive, page aligned) - * - flags - vma->vm_flags field - * - * coherent_kern_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start, end. If you have non-snooping - * Harvard caches, you need to implement this function. - * - start - virtual start address - * - end - virtual end address - * - * DMA Cache Coherency - * =================== - * - * dma_inv_range(start, end) - * - * Invalidate (discard) the specified virtual address range. - * May not write back any entries. If 'start' or 'end' - * are not cache line aligned, those lines must be written - * back. - * - start - virtual start address - * - end - virtual end address - * - * dma_clean_range(start, end) - * - * Clean (write back) the specified virtual address range. - * - start - virtual start address - * - end - virtual end address - * - * dma_flush_range(start, end) - * - * Clean and invalidate the specified virtual address range. - * - start - virtual start address - * - end - virtual end address - */ - -struct cpu_cache_fns { - void (*flush_kern_all)(void); - void (*flush_user_all)(void); - void (*flush_user_range)(unsigned long, unsigned long, unsigned int); - - void (*coherent_kern_range)(unsigned long, unsigned long); - void (*coherent_user_range)(unsigned long, unsigned long); - void (*flush_kern_dcache_page)(void *); - - void (*dma_inv_range)(const void *, const void *); - void (*dma_clean_range)(const void *, const void *); - void (*dma_flush_range)(const void *, const void *); -}; - -struct outer_cache_fns { - void (*inv_range)(unsigned long, unsigned long); - void (*clean_range)(unsigned long, unsigned long); - void (*flush_range)(unsigned long, unsigned long); -}; - -/* - * Select the calling method - */ -#ifdef MULTI_CACHE - -extern struct cpu_cache_fns cpu_cache; - -#define __cpuc_flush_kern_all cpu_cache.flush_kern_all -#define __cpuc_flush_user_all cpu_cache.flush_user_all -#define __cpuc_flush_user_range cpu_cache.flush_user_range -#define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range -#define __cpuc_coherent_user_range cpu_cache.coherent_user_range -#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page - -/* - * These are private to the dma-mapping API. Do not use directly. - * Their sole purpose is to ensure that data held in the cache - * is visible to DMA, or data written by DMA to system memory is - * visible to the CPU. - */ -#define dmac_inv_range cpu_cache.dma_inv_range -#define dmac_clean_range cpu_cache.dma_clean_range -#define dmac_flush_range cpu_cache.dma_flush_range - -#else - -#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) -#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) -#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) -#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) -#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) - -extern void __cpuc_flush_kern_all(void); -extern void __cpuc_flush_user_all(void); -extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); -extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); -extern void __cpuc_coherent_user_range(unsigned long, unsigned long); -extern void __cpuc_flush_dcache_page(void *); - -/* - * These are private to the dma-mapping API. Do not use directly. - * Their sole purpose is to ensure that data held in the cache - * is visible to DMA, or data written by DMA to system memory is - * visible to the CPU. - */ -#define dmac_inv_range __glue(_CACHE,_dma_inv_range) -#define dmac_clean_range __glue(_CACHE,_dma_clean_range) -#define dmac_flush_range __glue(_CACHE,_dma_flush_range) - -extern void dmac_inv_range(const void *, const void *); -extern void dmac_clean_range(const void *, const void *); -extern void dmac_flush_range(const void *, const void *); - -#endif - -#ifdef CONFIG_OUTER_CACHE - -extern struct outer_cache_fns outer_cache; - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ - if (outer_cache.inv_range) - outer_cache.inv_range(start, end); -} -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ - if (outer_cache.clean_range) - outer_cache.clean_range(start, end); -} -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ - if (outer_cache.flush_range) - outer_cache.flush_range(start, end); -} - -#else - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ } -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ } -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ } - -#endif - -/* - * flush_cache_vmap() is used when creating mappings (eg, via vmap, - * vmalloc, ioremap etc) in kernel space for pages. Since the - * direct-mappings of these pages may contain cached data, we need - * to do a full cache flush to ensure that writebacks don't corrupt - * data placed into these pages via the new mappings. - */ -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -/* - * Copy user data from/to a page which is mapped into a different - * processes address space. Really, we want to allow our "user - * space" model to handle this. - */ -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_ptrace_access(vma, page, vaddr, dst, len, 1);\ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - } while (0) - -/* - * Convert calls to our calling convention. - */ -#define flush_cache_all() __cpuc_flush_kern_all() -#ifndef CONFIG_CPU_CACHE_VIPT -static inline void flush_cache_mm(struct mm_struct *mm) -{ - if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) - __cpuc_flush_user_all(); -} - -static inline void -flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) -{ - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) - __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), - vma->vm_flags); -} - -static inline void -flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) -{ - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { - unsigned long addr = user_addr & PAGE_MASK; - __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); - } -} - -static inline void -flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, - unsigned long len, int write) -{ - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { - unsigned long addr = (unsigned long)kaddr; - __cpuc_coherent_kern_range(addr, addr + len); - } -} -#else -extern void flush_cache_mm(struct mm_struct *mm); -extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); -extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, - unsigned long len, int write); -#endif - -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - -/* - * flush_cache_user_range is used when we want to ensure that the - * Harvard caches are synchronised for the user space address range. - * This is used for the ARM private sys_cacheflush system call. - */ -#define flush_cache_user_range(vma,start,end) \ - __cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end)) - -/* - * Perform necessary cache operations to ensure that data previously - * stored within this range of addresses can be executed by the CPU. - */ -#define flush_icache_range(s,e) __cpuc_coherent_kern_range(s,e) - -/* - * Perform necessary cache operations to ensure that the TLB will - * see data written in the specified area. - */ -#define clean_dcache_area(start,size) cpu_dcache_clean_area(start, size) - -/* - * flush_dcache_page is used when the kernel has written to the page - * cache page at virtual address page->virtual. - * - * If this page isn't mapped (ie, page_mapping == NULL), or it might - * have userspace mappings, then we _must_ always clean + invalidate - * the dcache entries associated with the kernel mapping. - * - * Otherwise we can defer the operation, and clean the cache when we are - * about to change to user space. This is the same method as used on SPARC64. - * See update_mmu_cache for the user space part. - */ -extern void flush_dcache_page(struct page *); - -extern void __flush_dcache_page(struct address_space *mapping, struct page *page); - -static inline void __flush_icache_all(void) -{ - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - : - : "r" (0)); -} - -#define ARCH_HAS_FLUSH_ANON_PAGE -static inline void flush_anon_page(struct vm_area_struct *vma, - struct page *page, unsigned long vmaddr) -{ - extern void __flush_anon_page(struct vm_area_struct *vma, - struct page *, unsigned long); - if (PageAnon(page)) - __flush_anon_page(vma, page, vmaddr); -} - -#define flush_dcache_mmap_lock(mapping) \ - spin_lock_irq(&(mapping)->tree_lock) -#define flush_dcache_mmap_unlock(mapping) \ - spin_unlock_irq(&(mapping)->tree_lock) - -#define flush_icache_user_range(vma,page,addr,len) \ - flush_dcache_page(page) - -/* - * We don't appear to need to do anything here. In fact, if we did, we'd - * duplicate cache flushing elsewhere performed by flush_dcache_page(). - */ -#define flush_icache_page(vma,page) do { } while (0) - -static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, - unsigned offset, size_t size) -{ - const void *start = (void __force *)virt + offset; - dmac_inv_range(start, start + size); -} - -#define __cacheid_present(val) (val != read_cpuid(CPUID_ID)) -#define __cacheid_type_v7(val) ((val & (7 << 29)) == (4 << 29)) - -#define __cacheid_vivt_prev7(val) ((val & (15 << 25)) != (14 << 25)) -#define __cacheid_vipt_prev7(val) ((val & (15 << 25)) == (14 << 25)) -#define __cacheid_vipt_nonaliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25)) -#define __cacheid_vipt_aliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23)) - -#define __cacheid_vivt(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val)) -#define __cacheid_vipt(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val)) -#define __cacheid_vipt_nonaliasing(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val)) -#define __cacheid_vipt_aliasing(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val)) -#define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0) - -#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT) -/* - * VIVT caches only - */ -#define cache_is_vivt() 1 -#define cache_is_vipt() 0 -#define cache_is_vipt_nonaliasing() 0 -#define cache_is_vipt_aliasing() 0 -#define icache_is_vivt_asid_tagged() 0 - -#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT) -/* - * VIPT caches only - */ -#define cache_is_vivt() 0 -#define cache_is_vipt() 1 -#define cache_is_vipt_nonaliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_vipt_nonaliasing(__val); \ - }) - -#define cache_is_vipt_aliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_vipt_aliasing(__val); \ - }) - -#define icache_is_vivt_asid_tagged() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_vivt_asid_tagged_instr(__val); \ - }) - -#else -/* - * VIVT or VIPT caches. Note that this is unreliable since ARM926 - * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test. - * There's no way to tell from the CacheType register what type (!) - * the cache is. - */ -#define cache_is_vivt() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - (!__cacheid_present(__val)) || __cacheid_vivt(__val); \ - }) - -#define cache_is_vipt() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && __cacheid_vipt(__val); \ - }) - -#define cache_is_vipt_nonaliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && \ - __cacheid_vipt_nonaliasing(__val); \ - }) - -#define cache_is_vipt_aliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && \ - __cacheid_vipt_aliasing(__val); \ - }) - -#define icache_is_vivt_asid_tagged() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && \ - __cacheid_vivt_asid_tagged_instr(__val); \ - }) - -#endif - -#endif diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h deleted file mode 100644 index eaa0efd8d0d..00000000000 --- a/include/asm-arm/checksum.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * linux/include/asm-arm/checksum.h - * - * IP checksum routines - * - * Copyright (C) Original authors of ../asm-i386/checksum.h - * Copyright (C) 1996-1999 Russell King - */ -#ifndef __ASM_ARM_CHECKSUM_H -#define __ASM_ARM_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums, and handles user-space pointer exceptions correctly, when needed. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum -csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); - -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr); - -/* - * Fold a partial checksum without adding pseudo headers - */ -static inline __sum16 csum_fold(__wsum sum) -{ - __asm__( - "add %0, %1, %1, ror #16 @ csum_fold" - : "=r" (sum) - : "r" (sum) - : "cc"); - return (__force __sum16)(~(__force u32)sum >> 16); -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -static inline __sum16 -ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int tmp1; - __wsum sum; - - __asm__ __volatile__( - "ldr %0, [%1], #4 @ ip_fast_csum \n\ - ldr %3, [%1], #4 \n\ - sub %2, %2, #5 \n\ - adds %0, %0, %3 \n\ - ldr %3, [%1], #4 \n\ - adcs %0, %0, %3 \n\ - ldr %3, [%1], #4 \n\ -1: adcs %0, %0, %3 \n\ - ldr %3, [%1], #4 \n\ - tst %2, #15 @ do this carefully \n\ - subne %2, %2, #1 @ without destroying \n\ - bne 1b @ the carry flag \n\ - adcs %0, %0, %3 \n\ - adc %0, %0, #0" - : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1) - : "1" (iph), "2" (ihl) - : "cc", "memory"); - return csum_fold(sum); -} - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__( - "adds %0, %1, %2 @ csum_tcpudp_nofold \n\ - adcs %0, %0, %3 \n" -#ifdef __ARMEB__ - "adcs %0, %0, %4 \n" -#else - "adcs %0, %0, %4, lsl #8 \n" -#endif - "adcs %0, %0, %5 \n\ - adc %0, %0, #0" - : "=&r"(sum) - : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto)) - : "cc"); - return sum; -} -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 -ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -extern __wsum -__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len, - __be32 proto, __wsum sum); - -static inline __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len, - unsigned short proto, __wsum sum) -{ - return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), - htonl(proto), sum)); -} -#endif diff --git a/include/asm-arm/cnt32_to_63.h b/include/asm-arm/cnt32_to_63.h deleted file mode 100644 index 480c873fa74..00000000000 --- a/include/asm-arm/cnt32_to_63.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits - * - * Author: Nicolas Pitre - * Created: December 3, 2006 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __INCLUDE_CNT32_TO_63_H__ -#define __INCLUDE_CNT32_TO_63_H__ - -#include -#include -#include - -/* - * Prototype: u64 cnt32_to_63(u32 cnt) - * Many hardware clock counters are only 32 bits wide and therefore have - * a relatively short period making wrap-arounds rather frequent. This - * is a problem when implementing sched_clock() for example, where a 64-bit - * non-wrapping monotonic value is expected to be returned. - * - * To overcome that limitation, let's extend a 32-bit counter to 63 bits - * in a completely lock free fashion. Bits 0 to 31 of the clock are provided - * by the hardware while bits 32 to 62 are stored in memory. The top bit in - * memory is used to synchronize with the hardware clock half-period. When - * the top bit of both counters (hardware and in memory) differ then the - * memory is updated with a new value, incrementing it when the hardware - * counter wraps around. - * - * Because a word store in memory is atomic then the incremented value will - * always be in synch with the top bit indicating to any potential concurrent - * reader if the value in memory is up to date or not with regards to the - * needed increment. And any race in updating the value in memory is harmless - * as the same value would simply be stored more than once. - * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. - * - * Note that the top bit (bit 63) in the returned value should be considered - * as garbage. It is not cleared here because callers are likely to use a - * multiplier on the returned value which can get rid of the top bit - * implicitly by making the multiplier even, therefore saving on a runtime - * clear-bit instruction. Otherwise caller must remember to clear the top - * bit explicitly. - */ - -/* this is used only to give gcc a clue about good code generation */ -typedef union { - struct { -#if defined(__LITTLE_ENDIAN) - u32 lo, hi; -#elif defined(__BIG_ENDIAN) - u32 hi, lo; -#endif - }; - u64 val; -} cnt32_to_63_t; - -#define cnt32_to_63(cnt_lo) \ -({ \ - static volatile u32 __m_cnt_hi = 0; \ - cnt32_to_63_t __x; \ - __x.hi = __m_cnt_hi; \ - __x.lo = (cnt_lo); \ - if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ - __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ - __x.val; \ -}) - -#endif diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h deleted file mode 100644 index 3479de9266e..00000000000 --- a/include/asm-arm/cpu-multi32.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/include/asm-arm/cpu-multi32.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -struct mm_struct; - -/* - * Don't change this structure - ASM code - * relies on it. - */ -extern struct processor { - /* MISC - * get data abort address/flags - */ - void (*_data_abort)(unsigned long pc); - /* - * Retrieve prefetch fault address - */ - unsigned long (*_prefetch_abort)(unsigned long lr); - /* - * Set up any processor specifics - */ - void (*_proc_init)(void); - /* - * Disable any processor specifics - */ - void (*_proc_fin)(void); - /* - * Special stuff for a reset - */ - void (*reset)(unsigned long addr) __attribute__((noreturn)); - /* - * Idle the processor - */ - int (*_do_idle)(void); - /* - * Processor architecture specific - */ - /* - * clean a virtual address range from the - * D-cache without flushing the cache. - */ - void (*dcache_clean_area)(void *addr, int size); - - /* - * Set the page table - */ - void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); - /* - * Set a possibly extended PTE. Non-extended PTEs should - * ignore 'ext'. - */ - void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); -} processor; - -#define cpu_proc_init() processor._proc_init() -#define cpu_proc_fin() processor._proc_fin() -#define cpu_reset(addr) processor.reset(addr) -#define cpu_do_idle() processor._do_idle() -#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) -#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h deleted file mode 100644 index 0b120ee3609..00000000000 --- a/include/asm-arm/cpu-single.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/include/asm-arm/cpu-single.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/* - * Single CPU - */ -#ifdef __STDC__ -#define __catify_fn(name,x) name##x -#else -#define __catify_fn(name,x) name/**/x -#endif -#define __cpu_fn(name,x) __catify_fn(name,x) - -/* - * If we are supporting multiple CPUs, then we must use a table of - * function pointers for this lot. Otherwise, we can optimise the - * table away. - */ -#define cpu_proc_init __cpu_fn(CPU_NAME,_proc_init) -#define cpu_proc_fin __cpu_fn(CPU_NAME,_proc_fin) -#define cpu_reset __cpu_fn(CPU_NAME,_reset) -#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle) -#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area) -#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm) -#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext) - -#include - -struct mm_struct; - -/* declare all the functions as extern */ -extern void cpu_proc_init(void); -extern void cpu_proc_fin(void); -extern int cpu_do_idle(void); -extern void cpu_dcache_clean_area(void *, int); -extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); -extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); -extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/include/asm-arm/cpu.h b/include/asm-arm/cpu.h deleted file mode 100644 index 715426b9b08..00000000000 --- a/include/asm-arm/cpu.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * linux/include/asm-arm/cpu.h - * - * Copyright (C) 2004-2005 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_CPU_H -#define __ASM_ARM_CPU_H - -#include - -struct cpuinfo_arm { - struct cpu cpu; -#ifdef CONFIG_SMP - struct task_struct *idle; - unsigned int loops_per_jiffy; -#endif -}; - -DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data); - -#endif diff --git a/include/asm-arm/cputime.h b/include/asm-arm/cputime.h deleted file mode 100644 index 3a8002a5fec..00000000000 --- a/include/asm-arm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_CPUTIME_H -#define __ARM_CPUTIME_H - -#include - -#endif /* __ARM_CPUTIME_H */ diff --git a/include/asm-arm/current.h b/include/asm-arm/current.h deleted file mode 100644 index 75d21e2a3ff..00000000000 --- a/include/asm-arm/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASMARM_CURRENT_H -#define _ASMARM_CURRENT_H - -#include - -static inline struct task_struct *get_current(void) __attribute_const__; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current (get_current()) - -#endif /* _ASMARM_CURRENT_H */ diff --git a/include/asm-arm/delay.h b/include/asm-arm/delay.h deleted file mode 100644 index b2deda18154..00000000000 --- a/include/asm-arm/delay.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 1995-2004 Russell King - * - * Delay routines, using a pre-computed "loops_per_second" value. - */ -#ifndef __ASM_ARM_DELAY_H -#define __ASM_ARM_DELAY_H - -#include /* HZ */ - -extern void __delay(int loops); - -/* - * This function intentionally does not exist; if you see references to - * it, it means that you're calling udelay() with an out of range value. - * - * With currently imposed limits, this means that we support a max delay - * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 - */ -extern void __bad_udelay(void); - -/* - * division by multiplication: you don't have to worry about - * loss of precision. - * - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ -extern void __udelay(unsigned long usecs); -extern void __const_udelay(unsigned long); - -#define MAX_UDELAY_MS 2 - -#define udelay(n) \ - (__builtin_constant_p(n) ? \ - ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ - __const_udelay((n) * ((2199023U*HZ)>>11))) : \ - __udelay(n)) - -#endif /* defined(_ARM_DELAY_H) */ - diff --git a/include/asm-arm/device.h b/include/asm-arm/device.h deleted file mode 100644 index c61642b4060..00000000000 --- a/include/asm-arm/device.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#ifndef ASMARM_DEVICE_H -#define ASMARM_DEVICE_H - -struct dev_archdata { -#ifdef CONFIG_DMABOUNCE - struct dmabounce_device_info *dmabounce; -#endif -}; - -#endif diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h deleted file mode 100644 index 5001390be95..00000000000 --- a/include/asm-arm/div64.h +++ /dev/null @@ -1,227 +0,0 @@ -#ifndef __ASM_ARM_DIV64 -#define __ASM_ARM_DIV64 - -#include -#include - -/* - * The semantics of do_div() are: - * - * uint32_t do_div(uint64_t *n, uint32_t base) - * { - * uint32_t remainder = *n % base; - * *n = *n / base; - * return remainder; - * } - * - * In other words, a 64-bit dividend with a 32-bit divisor producing - * a 64-bit result and a 32-bit remainder. To accomplish this optimally - * we call a special __do_div64 helper with completely non standard - * calling convention for arguments and results (beware). - */ - -#ifdef __ARMEB__ -#define __xh "r0" -#define __xl "r1" -#else -#define __xl "r0" -#define __xh "r1" -#endif - -#define __do_div_asm(n, base) \ -({ \ - register unsigned int __base asm("r4") = base; \ - register unsigned long long __n asm("r0") = n; \ - register unsigned long long __res asm("r2"); \ - register unsigned int __rem asm(__xh); \ - asm( __asmeq("%0", __xh) \ - __asmeq("%1", "r2") \ - __asmeq("%2", "r0") \ - __asmeq("%3", "r4") \ - "bl __do_div64" \ - : "=r" (__rem), "=r" (__res) \ - : "r" (__n), "r" (__base) \ - : "ip", "lr", "cc"); \ - n = __res; \ - __rem; \ -}) - -#if __GNUC__ < 4 - -/* - * gcc versions earlier than 4.0 are simply too problematic for the - * optimized implementation below. First there is gcc PR 15089 that - * tend to trig on more complex constructs, spurious .global __udivsi3 - * are inserted even if none of those symbols are referenced in the - * generated code, and those gcc versions are not able to do constant - * propagation on long long values anyway. - */ -#define do_div(n, base) __do_div_asm(n, base) - -#elif __GNUC__ >= 4 - -#include - -/* - * If the divisor happens to be constant, we determine the appropriate - * inverse at compile time to turn the division into a few inline - * multiplications instead which is much faster. And yet only if compiling - * for ARMv4 or higher (we need umull/umlal) and if the gcc version is - * sufficiently recent to perform proper long long constant propagation. - * (It is unfortunate that gcc doesn't perform all this internally.) - */ -#define do_div(n, base) \ -({ \ - unsigned int __r, __b = (base); \ - if (!__builtin_constant_p(__b) || __b == 0 || \ - (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) { \ - /* non-constant divisor (or zero): slow path */ \ - __r = __do_div_asm(n, __b); \ - } else if ((__b & (__b - 1)) == 0) { \ - /* Trivial: __b is constant and a power of 2 */ \ - /* gcc does the right thing with this code. */ \ - __r = n; \ - __r &= (__b - 1); \ - n /= __b; \ - } else { \ - /* Multiply by inverse of __b: n/b = n*(p/b)/p */ \ - /* We rely on the fact that most of this code gets */ \ - /* optimized away at compile time due to constant */ \ - /* propagation and only a couple inline assembly */ \ - /* instructions should remain. Better avoid any */ \ - /* code construct that might prevent that. */ \ - unsigned long long __res, __x, __t, __m, __n = n; \ - unsigned int __c, __p, __z = 0; \ - /* preserve low part of n for reminder computation */ \ - __r = __n; \ - /* determine number of bits to represent __b */ \ - __p = 1 << __div64_fls(__b); \ - /* compute __m = ((__p << 64) + __b - 1) / __b */ \ - __m = (~0ULL / __b) * __p; \ - __m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b; \ - /* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */ \ - __x = ~0ULL / __b * __b - 1; \ - __res = (__m & 0xffffffff) * (__x & 0xffffffff); \ - __res >>= 32; \ - __res += (__m & 0xffffffff) * (__x >> 32); \ - __t = __res; \ - __res += (__x & 0xffffffff) * (__m >> 32); \ - __t = (__res < __t) ? (1ULL << 32) : 0; \ - __res = (__res >> 32) + __t; \ - __res += (__m >> 32) * (__x >> 32); \ - __res /= __p; \ - /* Now sanitize and optimize what we've got. */ \ - if (~0ULL % (__b / (__b & -__b)) == 0) { \ - /* those cases can be simplified with: */ \ - __n /= (__b & -__b); \ - __m = ~0ULL / (__b / (__b & -__b)); \ - __p = 1; \ - __c = 1; \ - } else if (__res != __x / __b) { \ - /* We can't get away without a correction */ \ - /* to compensate for bit truncation errors. */ \ - /* To avoid it we'd need an additional bit */ \ - /* to represent __m which would overflow it. */ \ - /* Instead we do m=p/b and n/b=(n*m+m)/p. */ \ - __c = 1; \ - /* Compute __m = (__p << 64) / __b */ \ - __m = (~0ULL / __b) * __p; \ - __m += ((~0ULL % __b + 1) * __p) / __b; \ - } else { \ - /* Reduce __m/__p, and try to clear bit 31 */ \ - /* of __m when possible otherwise that'll */ \ - /* need extra overflow handling later. */ \ - unsigned int __bits = -(__m & -__m); \ - __bits |= __m >> 32; \ - __bits = (~__bits) << 1; \ - /* If __bits == 0 then setting bit 31 is */ \ - /* unavoidable. Simply apply the maximum */ \ - /* possible reduction in that case. */ \ - /* Otherwise the MSB of __bits indicates the */ \ - /* best reduction we should apply. */ \ - if (!__bits) { \ - __p /= (__m & -__m); \ - __m /= (__m & -__m); \ - } else { \ - __p >>= __div64_fls(__bits); \ - __m >>= __div64_fls(__bits); \ - } \ - /* No correction needed. */ \ - __c = 0; \ - } \ - /* Now we have a combination of 2 conditions: */ \ - /* 1) whether or not we need a correction (__c), and */ \ - /* 2) whether or not there might be an overflow in */ \ - /* the cross product (__m & ((1<<63) | (1<<31))) */ \ - /* Select the best insn combination to perform the */ \ - /* actual __m * __n / (__p << 64) operation. */ \ - if (!__c) { \ - asm ( "umull %Q0, %R0, %1, %Q2\n\t" \ - "mov %Q0, #0" \ - : "=&r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ - __res = __m; \ - asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \ - "mov %Q0, #0" \ - : "+r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else { \ - asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ - "cmn %Q0, %Q1\n\t" \ - "adcs %R0, %R0, %R1\n\t" \ - "adc %Q0, %3, #0" \ - : "=&r" (__res) \ - : "r" (__m), "r" (__n), "r" (__z) \ - : "cc" ); \ - } \ - if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ - asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" \ - "umlal %R0, %Q0, %Q1, %R2\n\t" \ - "mov %R0, #0\n\t" \ - "umlal %Q0, %R0, %R1, %R2" \ - : "+r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else { \ - asm ( "umlal %R0, %Q0, %R2, %Q3\n\t" \ - "umlal %R0, %1, %Q2, %R3\n\t" \ - "mov %R0, #0\n\t" \ - "adds %Q0, %1, %Q0\n\t" \ - "adc %R0, %R0, #0\n\t" \ - "umlal %Q0, %R0, %R2, %R3" \ - : "+r" (__res), "+r" (__z) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } \ - __res /= __p; \ - /* The reminder can be computed with 32-bit regs */ \ - /* only, and gcc is good at that. */ \ - { \ - unsigned int __res0 = __res; \ - unsigned int __b0 = __b; \ - __r -= __res0 * __b0; \ - } \ - /* BUG_ON(__r >= __b || __res * __b + __r != n); */ \ - n = __res; \ - } \ - __r; \ -}) - -/* our own fls implementation to make sure constant propagation is fine */ -#define __div64_fls(bits) \ -({ \ - unsigned int __left = (bits), __nr = 0; \ - if (__left & 0xffff0000) __nr += 16, __left >>= 16; \ - if (__left & 0x0000ff00) __nr += 8, __left >>= 8; \ - if (__left & 0x000000f0) __nr += 4, __left >>= 4; \ - if (__left & 0x0000000c) __nr += 2, __left >>= 2; \ - if (__left & 0x00000002) __nr += 1; \ - __nr; \ -}) - -#endif - -#endif diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h deleted file mode 100644 index f41335ba633..00000000000 --- a/include/asm-arm/dma-mapping.h +++ /dev/null @@ -1,456 +0,0 @@ -#ifndef ASMARM_DMA_MAPPING_H -#define ASMARM_DMA_MAPPING_H - -#ifdef __KERNEL__ - -#include /* need struct page */ - -#include - -/* - * DMA-consistent mapping functions. These allocate/free a region of - * uncached, unwrite-buffered mapped memory space for use with DMA - * devices. This is the "generic" version. The PCI specific version - * is in pci.h - * - * Note: Drivers should NOT use this function directly, as it will break - * platforms with CONFIG_DMABOUNCE. - * Use the driver DMA support - see dma-mapping.h (dma_sync_*) - */ -extern void dma_cache_maint(const void *kaddr, size_t size, int rw); - -/* - * Return whether the given device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during bus mastering, then you would pass 0x00ffffff as the mask - * to this function. - * - * FIXME: This should really be a platform specific issue - we should - * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. - */ -static inline int dma_supported(struct device *dev, u64 mask) -{ - return dev->dma_mask && *dev->dma_mask != 0; -} - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - - *dev->dma_mask = dma_mask; - - return 0; -} - -static inline int dma_get_cache_alignment(void) -{ - return 32; -} - -static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) -{ - return !!arch_is_coherent(); -} - -/* - * DMA errors are defined by all-bits-set in the DMA address. - */ -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr == ~0; -} - -/* - * Dummy noncoherent implementation. We don't provide a dma_cache_sync - * function so drivers using this API are highlighted with build warnings. - */ -static inline void * -dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) -{ - return NULL; -} - -static inline void -dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle) -{ -} - -/** - * dma_alloc_coherent - allocate consistent memory for DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: required memory size - * @handle: bus-specific DMA address - * - * Allocate some uncached, unbuffered memory for a device for - * performing DMA. This function allocates pages, and will - * return the CPU-viewed address, and sets @handle to be the - * device-viewed address. - */ -extern void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); - -/** - * dma_free_coherent - free memory allocated by dma_alloc_coherent - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: size of memory originally requested in dma_alloc_coherent - * @cpu_addr: CPU-view address returned from dma_alloc_coherent - * @handle: device-view address returned from dma_alloc_coherent - * - * Free (and unmap) a DMA buffer previously allocated by - * dma_alloc_coherent(). - * - * References to memory and mappings associated with cpu_addr/handle - * during and after this call executing are illegal. - */ -extern void -dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle); - -/** - * dma_mmap_coherent - map a coherent DMA allocation into user space - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @vma: vm_area_struct describing requested user mapping - * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent - * @handle: device-view address returned from dma_alloc_coherent - * @size: size of memory originally requested in dma_alloc_coherent - * - * Map a coherent DMA buffer previously allocated by dma_alloc_coherent - * into user space. The coherent DMA buffer must not be freed by the - * driver until the user space mapping has been released. - */ -int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t handle, size_t size); - - -/** - * dma_alloc_writecombine - allocate writecombining memory for DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: required memory size - * @handle: bus-specific DMA address - * - * Allocate some uncached, buffered memory for a device for - * performing DMA. This function allocates pages, and will - * return the CPU-viewed address, and sets @handle to be the - * device-viewed address. - */ -extern void * -dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); - -#define dma_free_writecombine(dev,size,cpu_addr,handle) \ - dma_free_coherent(dev,size,cpu_addr,handle) - -int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t handle, size_t size); - - -/** - * dma_map_single - map a single buffer for streaming DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @cpu_addr: CPU direct mapped address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Ensure that any data held in the cache is appropriately discarded - * or written back. - * - * The device owns this memory once this call has completed. The CPU - * can regain ownership by calling dma_unmap_single() or - * dma_sync_single_for_cpu(). - */ -#ifndef CONFIG_DMABOUNCE -static inline dma_addr_t -dma_map_single(struct device *dev, void *cpu_addr, size_t size, - enum dma_data_direction dir) -{ - if (!arch_is_coherent()) - dma_cache_maint(cpu_addr, size, dir); - - return virt_to_dma(dev, (unsigned long)cpu_addr); -} -#else -extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction); -#endif - -/** - * dma_map_page - map a portion of a page for streaming DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @page: page that buffer resides in - * @offset: offset into page for start of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Ensure that any data held in the cache is appropriately discarded - * or written back. - * - * The device owns this memory once this call has completed. The CPU - * can regain ownership by calling dma_unmap_page() or - * dma_sync_single_for_cpu(). - */ -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_single(dev, page_address(page) + offset, size, (int)dir); -} - -/** - * dma_unmap_single - unmap a single buffer previously mapped - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Unmap a single streaming mode DMA translation. The handle and size - * must match what was provided in the previous dma_map_single() call. - * All other usages are undefined. - * - * After this call, reads by the CPU to the buffer are guaranteed to see - * whatever the device wrote there. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - /* nothing to do */ -} -#else -extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction); -#endif - -/** - * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Unmap a single streaming mode DMA translation. The handle and size - * must match what was provided in the previous dma_map_single() call. - * All other usages are undefined. - * - * After this call, reads by the CPU to the buffer are guaranteed to see - * whatever the device wrote there. - */ -static inline void -dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - dma_unmap_single(dev, handle, size, (int)dir); -} - -/** - * dma_map_sg - map a set of SG buffers for streaming mode DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scatter-gather version of the - * above dma_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for dma_map_single are - * the same here. - */ -#ifndef CONFIG_DMABOUNCE -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - char *virt; - - sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset; - virt = sg_virt(sg); - - if (!arch_is_coherent()) - dma_cache_maint(virt, sg->length, dir); - } - - return nents; -} -#else -extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); -#endif - -/** - * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Unmap a set of streaming mode DMA translations. - * Again, CPU read rules concerning calls here are the same as for - * dma_unmap_single() above. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - - /* nothing to do */ -} -#else -extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); -#endif - - -/** - * dma_sync_single_for_cpu - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Make physical memory consistent for a single streaming mode DMA - * translation after a transfer. - * - * If you perform a dma_map_single() but wish to interrogate the - * buffer using the cpu, yet do not wish to teardown the PCI dma - * mapping, you must call this function before doing so. At the - * next point you give the PCI dma address back to the card, you - * must first the perform a dma_sync_for_device, and then the - * device again owns the buffer. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - if (!arch_is_coherent()) - dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); -} - -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - if (!arch_is_coherent()) - dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); -} -#else -extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction); -extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction); -#endif - - -/** - * dma_sync_sg_for_cpu - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Make physical memory consistent for a set of streaming - * mode DMA translations after a transfer. - * - * The same as dma_sync_single_for_* but for a scatter-gather list, - * same rules and usage. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - char *virt = sg_virt(sg); - if (!arch_is_coherent()) - dma_cache_maint(virt, sg->length, dir); - } -} - -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - char *virt = sg_virt(sg); - if (!arch_is_coherent()) - dma_cache_maint(virt, sg->length, dir); - } -} -#else -extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction); -extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction); -#endif - -#ifdef CONFIG_DMABOUNCE -/* - * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" - * and utilize bounce buffers as needed to work around limited DMA windows. - * - * On the SA-1111, a bug limits DMA to only certain regions of RAM. - * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) - * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) - * - * The following are helper functions used by the dmabounce subystem - * - */ - -/** - * dmabounce_register_dev - * - * @dev: valid struct device pointer - * @small_buf_size: size of buffers to use with small buffer pool - * @large_buf_size: size of buffers to use with large buffer pool (can be 0) - * - * This function should be called by low-level platform code to register - * a device as requireing DMA buffer bouncing. The function will allocate - * appropriate DMA pools for the device. - * - */ -extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long); - -/** - * dmabounce_unregister_dev - * - * @dev: valid struct device pointer - * - * This function should be called by low-level platform code when device - * that was previously registered with dmabounce_register_dev is removed - * from the system. - * - */ -extern void dmabounce_unregister_dev(struct device *); - -/** - * dma_needs_bounce - * - * @dev: valid struct device pointer - * @dma_handle: dma_handle of unbounced buffer - * @size: size of region being mapped - * - * Platforms that utilize the dmabounce mechanism must implement - * this function. - * - * The dmabounce routines call this function whenever a dma-mapping - * is requested to determine whether a given buffer needs to be bounced - * or not. The function must return 0 if the buffer is OK for - * DMA access and 1 if the buffer needs to be bounced. - * - */ -extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); -#endif /* CONFIG_DMABOUNCE */ - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h deleted file mode 100644 index 9f2c5305c26..00000000000 --- a/include/asm-arm/dma.h +++ /dev/null @@ -1,143 +0,0 @@ -#ifndef __ASM_ARM_DMA_H -#define __ASM_ARM_DMA_H - -typedef unsigned int dmach_t; - -#include -#include -#include -#include - -/* - * This is the maximum virtual address which can be DMA'd from. - */ -#ifndef MAX_DMA_ADDRESS -#define MAX_DMA_ADDRESS 0xffffffff -#endif - -/* - * DMA modes - */ -typedef unsigned int dmamode_t; - -#define DMA_MODE_MASK 3 - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_CASCADE 2 -#define DMA_AUTOINIT 4 - -extern spinlock_t dma_spin_lock; - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - */ -#define clear_dma_ff(channel) - -/* Set only the page register bits of the transfer address. - * - * NOTE: This is an architecture specific function, and should - * be hidden from the drivers - */ -extern void set_dma_page(dmach_t channel, char pagenr); - -/* Request a DMA channel - * - * Some architectures may need to do allocate an interrupt - */ -extern int request_dma(dmach_t channel, const char * device_id); - -/* Free a DMA channel - * - * Some architectures may need to do free an interrupt - */ -extern void free_dma(dmach_t channel); - -/* Enable DMA for this channel - * - * On some architectures, this may have other side effects like - * enabling an interrupt and setting the DMA registers. - */ -extern void enable_dma(dmach_t channel); - -/* Disable DMA for this channel - * - * On some architectures, this may have other side effects like - * disabling an interrupt or whatever. - */ -extern void disable_dma(dmach_t channel); - -/* Test whether the specified channel has an active DMA transfer - */ -extern int dma_channel_active(dmach_t channel); - -/* Set the DMA scatter gather list for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA address immediately, but defer it to the enable_dma(). - */ -extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); - -/* Set the DMA address for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA address immediately, but defer it to the enable_dma(). - */ -extern void __set_dma_addr(dmach_t channel, void *addr); -#define set_dma_addr(channel, addr) \ - __set_dma_addr(channel, bus_to_virt(addr)) - -/* Set the DMA byte count for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA count immediately, but defer it to the enable_dma(). - */ -extern void set_dma_count(dmach_t channel, unsigned long count); - -/* Set the transfer direction for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA transfer direction immediately, but defer it to the - * enable_dma(). - */ -extern void set_dma_mode(dmach_t channel, dmamode_t mode); - -/* Set the transfer speed for this channel - */ -extern void set_dma_speed(dmach_t channel, int cycle_ns); - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -extern int get_dma_residue(dmach_t channel); - -#ifndef NO_DMA -#define NO_DMA 255 -#endif - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ARM_DMA_H */ diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h deleted file mode 100644 index 3c12a762530..00000000000 --- a/include/asm-arm/domain.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/include/asm-arm/domain.h - * - * Copyright (C) 1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PROC_DOMAIN_H -#define __ASM_PROC_DOMAIN_H - -/* - * Domain numbers - * - * DOMAIN_IO - domain 2 includes all IO only - * DOMAIN_USER - domain 1 includes all user memory only - * DOMAIN_KERNEL - domain 0 includes all kernel memory only - * - * The domain numbering depends on whether we support 36 physical - * address for I/O or not. Addresses above the 32 bit boundary can - * only be mapped using supersections and supersections can only - * be set for domain 0. We could just default to DOMAIN_IO as zero, - * but there may be systems with supersection support and no 36-bit - * addressing. In such cases, we want to map system memory with - * supersections to reduce TLB misses and footprint. - * - * 36-bit addressing and supersections are only available on - * CPUs based on ARMv6+ or the Intel XSC3 core. - */ -#ifndef CONFIG_IO_36 -#define DOMAIN_KERNEL 0 -#define DOMAIN_TABLE 0 -#define DOMAIN_USER 1 -#define DOMAIN_IO 2 -#else -#define DOMAIN_KERNEL 2 -#define DOMAIN_TABLE 2 -#define DOMAIN_USER 1 -#define DOMAIN_IO 0 -#endif - -/* - * Domain types - */ -#define DOMAIN_NOACCESS 0 -#define DOMAIN_CLIENT 1 -#define DOMAIN_MANAGER 3 - -#define domain_val(dom,type) ((type) << (2*(dom))) - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MMU -#define set_domain(x) \ - do { \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c3, c0 @ set domain" \ - : : "r" (x)); \ - isb(); \ - } while (0) - -#define modify_domain(dom,type) \ - do { \ - struct thread_info *thread = current_thread_info(); \ - unsigned int domain = thread->cpu_domain; \ - domain &= ~domain_val(dom, DOMAIN_MANAGER); \ - thread->cpu_domain = domain | domain_val(dom, type); \ - set_domain(thread->cpu_domain); \ - } while (0) - -#else -#define set_domain(x) do { } while (0) -#define modify_domain(dom,type) do { } while (0) -#endif - -#endif -#endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h deleted file mode 100644 index 5e22881a630..00000000000 --- a/include/asm-arm/ecard.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * linux/include/asm-arm/ecard.h - * - * definitions for expansion cards - * - * This is a new system as from Linux 1.2.3 - * - * Changelog: - * 11-12-1996 RMK Further minor improvements - * 12-09-1997 RMK Added interrupt enable/disable for card level - * - * Reference: Acorns Risc OS 3 Programmers Reference Manuals. - */ - -#ifndef __ASM_ECARD_H -#define __ASM_ECARD_H - -/* - * Currently understood cards (but not necessarily - * supported): - * Manufacturer Product ID - */ -#define MANU_ACORN 0x0000 -#define PROD_ACORN_SCSI 0x0002 -#define PROD_ACORN_ETHER1 0x0003 -#define PROD_ACORN_MFM 0x000b - -#define MANU_ANT2 0x0011 -#define PROD_ANT_ETHER3 0x00a4 - -#define MANU_ATOMWIDE 0x0017 -#define PROD_ATOMWIDE_3PSERIAL 0x0090 - -#define MANU_IRLAM_INSTRUMENTS 0x001f -#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678 - -#define MANU_OAK 0x0021 -#define PROD_OAK_SCSI 0x0058 - -#define MANU_MORLEY 0x002b -#define PROD_MORLEY_SCSI_UNCACHED 0x0067 - -#define MANU_CUMANA 0x003a -#define PROD_CUMANA_SCSI_2 0x003a -#define PROD_CUMANA_SCSI_1 0x00a0 - -#define MANU_ICS 0x003c -#define PROD_ICS_IDE 0x00ae - -#define MANU_ICS2 0x003d -#define PROD_ICS2_IDE 0x00ae - -#define MANU_SERPORT 0x003f -#define PROD_SERPORT_DSPORT 0x00b9 - -#define MANU_ARXE 0x0041 -#define PROD_ARXE_SCSI 0x00be - -#define MANU_I3 0x0046 -#define PROD_I3_ETHERLAN500 0x00d4 -#define PROD_I3_ETHERLAN600 0x00ec -#define PROD_I3_ETHERLAN600A 0x011e - -#define MANU_ANT 0x0053 -#define PROD_ANT_ETHERM 0x00d8 -#define PROD_ANT_ETHERB 0x00e4 - -#define MANU_ALSYSTEMS 0x005b -#define PROD_ALSYS_SCSIATAPI 0x0107 - -#define MANU_MCS 0x0063 -#define PROD_MCS_CONNECT32 0x0125 - -#define MANU_EESOX 0x0064 -#define PROD_EESOX_SCSI2 0x008c - -#define MANU_YELLOWSTONE 0x0096 -#define PROD_YELLOWSTONE_RAPIDE32 0x0120 - -#ifdef ECARD_C -#define CONST -#else -#define CONST const -#endif - -#define MAX_ECARDS 9 - -struct ecard_id { /* Card ID structure */ - unsigned short manufacturer; - unsigned short product; - void *data; -}; - -struct in_ecid { /* Packed card ID information */ - unsigned short product; /* Product code */ - unsigned short manufacturer; /* Manufacturer code */ - unsigned char id:4; /* Simple ID */ - unsigned char cd:1; /* Chunk dir present */ - unsigned char is:1; /* Interrupt status pointers */ - unsigned char w:2; /* Width */ - unsigned char country; /* Country */ - unsigned char irqmask; /* IRQ mask */ - unsigned char fiqmask; /* FIQ mask */ - unsigned long irqoff; /* IRQ offset */ - unsigned long fiqoff; /* FIQ offset */ -}; - -typedef struct expansion_card ecard_t; -typedef unsigned long *loader_t; - -typedef struct expansion_card_ops { /* Card handler routines */ - void (*irqenable)(ecard_t *ec, int irqnr); - void (*irqdisable)(ecard_t *ec, int irqnr); - int (*irqpending)(ecard_t *ec); - void (*fiqenable)(ecard_t *ec, int fiqnr); - void (*fiqdisable)(ecard_t *ec, int fiqnr); - int (*fiqpending)(ecard_t *ec); -} expansioncard_ops_t; - -#define ECARD_NUM_RESOURCES (6) - -#define ECARD_RES_IOCSLOW (0) -#define ECARD_RES_IOCMEDIUM (1) -#define ECARD_RES_IOCFAST (2) -#define ECARD_RES_IOCSYNC (3) -#define ECARD_RES_MEMC (4) -#define ECARD_RES_EASI (5) - -#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start) -#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end) -#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \ - (ec)->resource[nr].start + 1) -#define ecard_resource_flags(ec,nr) ((ec)->resource[nr].flags) - -/* - * This contains all the info needed on an expansion card - */ -struct expansion_card { - struct expansion_card *next; - - struct device dev; - struct resource resource[ECARD_NUM_RESOURCES]; - - /* Public data */ - void __iomem *irqaddr; /* address of IRQ register */ - void __iomem *fiqaddr; /* address of FIQ register */ - unsigned char irqmask; /* IRQ mask */ - unsigned char fiqmask; /* FIQ mask */ - unsigned char claimed; /* Card claimed? */ - unsigned char easi; /* EASI card */ - - void *irq_data; /* Data for use for IRQ by card */ - void *fiq_data; /* Data for use for FIQ by card */ - const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */ - - CONST unsigned int slot_no; /* Slot number */ - CONST unsigned int dma; /* DMA number (for request_dma) */ - CONST unsigned int irq; /* IRQ number (for request_irq) */ - CONST unsigned int fiq; /* FIQ number (for request_irq) */ - CONST struct in_ecid cid; /* Card Identification */ - - /* Private internal data */ - const char *card_desc; /* Card description */ - CONST unsigned int podaddr; /* Base Linux address for card */ - CONST loader_t loader; /* loader program */ - u64 dma_mask; -}; - -void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data); - -struct in_chunk_dir { - unsigned int start_offset; - union { - unsigned char string[256]; - unsigned char data[1]; - } d; -}; - -/* - * Read a chunk from an expansion card - * cd : where to put read data - * ec : expansion card info struct - * id : id number to find - * num: (n+1)'th id to find. - */ -extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num); - -/* - * Request and release ecard resources - */ -extern int ecard_request_resources(struct expansion_card *ec); -extern void ecard_release_resources(struct expansion_card *ec); - -void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, - unsigned long offset, unsigned long maxsize); -#define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr) - -extern struct bus_type ecard_bus_type; - -#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev) - -struct ecard_driver { - int (*probe)(struct expansion_card *, const struct ecard_id *id); - void (*remove)(struct expansion_card *); - void (*shutdown)(struct expansion_card *); - const struct ecard_id *id_table; - unsigned int id; - struct device_driver drv; -}; - -#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv) - -#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data)) -#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev) - -int ecard_register_driver(struct ecard_driver *); -void ecard_remove_driver(struct ecard_driver *); - -#endif diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h deleted file mode 100644 index 4ca75162748..00000000000 --- a/include/asm-arm/elf.h +++ /dev/null @@ -1,116 +0,0 @@ -#ifndef __ASMARM_ELF_H -#define __ASMARM_ELF_H - -#include - -#ifndef __ASSEMBLY__ -/* - * ELF register definitions.. - */ -#include -#include - -typedef unsigned long elf_greg_t; -typedef unsigned long elf_freg_t[3]; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fp elf_fpregset_t; -#endif - -#define EM_ARM 40 -#define EF_ARM_APCS26 0x08 -#define EF_ARM_SOFT_FLOAT 0x200 -#define EF_ARM_EABI_MASK 0xFF000000 - -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#ifdef __ARMEB__ -#define ELF_DATA ELFDATA2MSB -#else -#define ELF_DATA ELFDATA2LSB -#endif -#define ELF_ARCH EM_ARM - -#ifndef __ASSEMBLY__ -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - * - * For now we just provide a fairly general string that describes the - * processor family. This could be made more specific later if someone - * implemented optimisations that require it. 26-bit CPUs give you - * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't - * supported). 32-bit CPUs give you "v3[lb]" for anything based on an - * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1 - * core. - */ -#define ELF_PLATFORM_SIZE 8 -#define ELF_PLATFORM (elf_platform) - -extern char elf_platform[]; -#endif - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x)) - -/* - * 32-bit code is always OK. Some cpus can do 26-bit, some can't. - */ -#define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x)) - -#define ELF_THUMB_OK(x) \ - ((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \ - ((x)->e_entry & 3) == 0) - -#define ELF_26BIT_OK(x) \ - ((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \ - ((x)->e_flags & EF_ARM_APCS26) == 0) - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -/* When the program starts, a1 contains a pointer to a function to be - registered with atexit, as per the SVR4 ABI. A value of 0 means we - have no such handler. */ -#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 - -/* - * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0 - * and CP1, we only enable access to the iWMMXt coprocessor if the - * binary is EABI or softfloat (and thus, guaranteed not to use - * FPA instructions.) - */ -#define SET_PERSONALITY(ex, ibcs2) \ - do { \ - if ((ex).e_flags & EF_ARM_APCS26) { \ - set_personality(PER_LINUX); \ - } else { \ - set_personality(PER_LINUX_32BIT); \ - if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \ - set_thread_flag(TIF_USING_IWMMXT); \ - else \ - clear_thread_flag(TIF_USING_IWMMXT); \ - } \ - } while (0) - -#endif diff --git a/include/asm-arm/emergency-restart.h b/include/asm-arm/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/include/asm-arm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-arm/errno.h b/include/asm-arm/errno.h deleted file mode 100644 index 6e60f0612bb..00000000000 --- a/include/asm-arm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_ERRNO_H -#define _ARM_ERRNO_H - -#include - -#endif diff --git a/include/asm-arm/fb.h b/include/asm-arm/fb.h deleted file mode 100644 index d92e99cd8c8..00000000000 --- a/include/asm-arm/fb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-arm/fcntl.h b/include/asm-arm/fcntl.h deleted file mode 100644 index a80b6607b2e..00000000000 --- a/include/asm-arm/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ARM_FCNTL_H -#define _ARM_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ -#define O_LARGEFILE 0400000 - -#include - -#endif diff --git a/include/asm-arm/fiq.h b/include/asm-arm/fiq.h deleted file mode 100644 index a3bad09e825..00000000000 --- a/include/asm-arm/fiq.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/fiq.h - * - * Support for FIQ on ARM architectures. - * Written by Philip Blundell , 1998 - * Re-written by Russell King - */ - -#ifndef __ASM_FIQ_H -#define __ASM_FIQ_H - -#include - -struct fiq_handler { - struct fiq_handler *next; - /* Name - */ - const char *name; - /* Called to ask driver to relinquish/ - * reacquire FIQ - * return zero to accept, or - - */ - int (*fiq_op)(void *, int relinquish); - /* data for the relinquish/reacquire functions - */ - void *dev_id; -}; - -extern int claim_fiq(struct fiq_handler *f); -extern void release_fiq(struct fiq_handler *f); -extern void set_fiq_handler(void *start, unsigned int length); -extern void set_fiq_regs(struct pt_regs *regs); -extern void get_fiq_regs(struct pt_regs *regs); -extern void enable_fiq(int fiq); -extern void disable_fiq(int fiq); - -#endif diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h deleted file mode 100644 index 9918aa46d9e..00000000000 --- a/include/asm-arm/flat.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/flat.h -- uClinux flat-format executables - */ - -#ifndef __ARM_FLAT_H__ -#define __ARM_FLAT_H__ - -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) -#define flat_argvp_envp_on_stack() 1 -#define flat_old_ram_flag(flags) (flags) -#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) -#define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) 0 - -#endif /* __ARM_FLAT_H__ */ diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h deleted file mode 100644 index 41a5e9d6bb6..00000000000 --- a/include/asm-arm/floppy.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/include/asm-arm/floppy.h - * - * Copyright (C) 1996-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here - */ -#ifndef __ASM_ARM_FLOPPY_H -#define __ASM_ARM_FLOPPY_H -#if 0 -#include -#endif - -#define fd_outb(val,port) \ - do { \ - if ((port) == FD_DOR) \ - fd_setdor((val)); \ - else \ - outb((val),(port)); \ - } while(0) - -#define fd_inb(port) inb((port)) -#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\ - IRQF_DISABLED,"floppy",NULL) -#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL) -#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK) -#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK) - -static inline int fd_dma_setup(void *data, unsigned int length, - unsigned int mode, unsigned long addr) -{ - set_dma_mode(DMA_FLOPPY, mode); - __set_dma_addr(DMA_FLOPPY, data); - set_dma_count(DMA_FLOPPY, length); - virtual_dma_port = addr; - enable_dma(DMA_FLOPPY); - return 0; -} -#define fd_dma_setup fd_dma_setup - -#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy") -#define fd_free_dma() free_dma(DMA_FLOPPY) -#define fd_disable_dma() disable_dma(DMA_FLOPPY) - -/* need to clean up dma.h */ -#define DMA_FLOPPYDISK DMA_FLOPPY - -/* Floppy_selects is the list of DOR's to select drive fd - * - * On initialisation, the floppy list is scanned, and the drives allocated - * in the order that they are found. This is done by seeking the drive - * to a non-zero track, and then restoring it to track 0. If an error occurs, - * then there is no floppy drive present. [to be put back in again] - */ -static unsigned char floppy_selects[2][4] = -{ - { 0x10, 0x21, 0x23, 0x33 }, - { 0x10, 0x21, 0x23, 0x33 } -}; - -#define fd_setdor(dor) \ -do { \ - int new_dor = (dor); \ - if (new_dor & 0xf0) \ - new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \ - else \ - new_dor &= 0x0c; \ - outb(new_dor, FD_DOR); \ -} while (0) - -/* - * Someday, we'll automatically detect which drives are present... - */ -static inline void fd_scandrives (void) -{ -#if 0 - int floppy, drive_count; - - fd_disable_irq(); - raw_cmd = &default_raw_cmd; - raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK; - raw_cmd->track = 0; - raw_cmd->rate = ?; - drive_count = 0; - for (floppy = 0; floppy < 4; floppy ++) { - current_drive = drive_count; - /* - * Turn on floppy motor - */ - if (start_motor(redo_fd_request)) - continue; - /* - * Set up FDC - */ - fdc_specify(); - /* - * Tell FDC to recalibrate - */ - output_byte(FD_RECALIBRATE); - LAST_OUT(UNIT(floppy)); - /* wait for command to complete */ - if (!successful) { - int i; - for (i = drive_count; i < 3; i--) - floppy_selects[fdc][i] = floppy_selects[fdc][i + 1]; - floppy_selects[fdc][3] = 0; - floppy -= 1; - } else - drive_count++; - } -#else - floppy_selects[0][0] = 0x10; - floppy_selects[0][1] = 0x21; - floppy_selects[0][2] = 0x23; - floppy_selects[0][3] = 0x33; -#endif -} - -#define FDC1 (0x3f0) - -#define FLOPPY0_TYPE 4 -#define FLOPPY1_TYPE 4 - -#define N_FDC 1 -#define N_DRIVE 4 - -#define CROSS_64KB(a,s) (0) - -/* - * This allows people to reverse the order of - * fd0 and fd1, in case their hardware is - * strangely connected (as some RiscPCs - * and A5000s seem to be). - */ -static void driveswap(int *ints, int dummy, int dummy2) -{ - floppy_selects[0][0] ^= floppy_selects[0][1]; - floppy_selects[0][1] ^= floppy_selects[0][0]; - floppy_selects[0][0] ^= floppy_selects[0][1]; -} - -#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 } - -#endif diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h deleted file mode 100644 index 392eb533232..00000000000 --- a/include/asm-arm/fpstate.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * linux/include/asm-arm/fpstate.h - * - * Copyright (C) 1995 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_FPSTATE_H -#define __ASM_ARM_FPSTATE_H - - -#ifndef __ASSEMBLY__ - -/* - * VFP storage area has: - * - FPEXC, FPSCR, FPINST and FPINST2. - * - 16 or 32 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) - * - * FPEXC will always be non-zero once the VFP has been used in this process. - */ - -struct vfp_hard_struct { -#ifdef CONFIG_VFPv3 - __u64 fpregs[32]; -#else - __u64 fpregs[16]; -#endif -#if __LINUX_ARM_ARCH__ < 6 - __u32 fpmx_state; -#endif - __u32 fpexc; - __u32 fpscr; - /* - * VFP implementation specific state - */ - __u32 fpinst; - __u32 fpinst2; - -#ifdef CONFIG_SMP - __u32 cpu; -#endif -}; - -union vfp_state { - struct vfp_hard_struct hard; -}; - -extern void vfp_flush_thread(union vfp_state *); -extern void vfp_release_thread(union vfp_state *); - -#define FP_HARD_SIZE 35 - -struct fp_hard_struct { - unsigned int save[FP_HARD_SIZE]; /* as yet undefined */ -}; - -#define FP_SOFT_SIZE 35 - -struct fp_soft_struct { - unsigned int save[FP_SOFT_SIZE]; /* undefined information */ -}; - -#define IWMMXT_SIZE 0x98 - -struct iwmmxt_struct { - unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)]; -}; - -union fp_state { - struct fp_hard_struct hard; - struct fp_soft_struct soft; -#ifdef CONFIG_IWMMXT - struct iwmmxt_struct iwmmxt; -#endif -}; - -#define FP_SIZE (sizeof(union fp_state) / sizeof(int)) - -struct crunch_state { - unsigned int mvdx[16][2]; - unsigned int mvax[4][3]; - unsigned int dspsc[2]; -}; - -#define CRUNCH_SIZE sizeof(struct crunch_state) - -#endif - -#endif diff --git a/include/asm-arm/ftrace.h b/include/asm-arm/ftrace.h deleted file mode 100644 index 584ef9a8e5a..00000000000 --- a/include/asm-arm/ftrace.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_ARM_FTRACE -#define _ASM_ARM_FTRACE - -#ifdef CONFIG_FTRACE -#define MCOUNT_ADDR ((long)(mcount)) -#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ - -#ifndef __ASSEMBLY__ -extern void mcount(void); -#endif - -#endif - -#endif /* _ASM_ARM_FTRACE */ diff --git a/include/asm-arm/futex.h b/include/asm-arm/futex.h deleted file mode 100644 index 6a332a9f099..00000000000 --- a/include/asm-arm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-arm/glue.h b/include/asm-arm/glue.h deleted file mode 100644 index a97a182ba28..00000000000 --- a/include/asm-arm/glue.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * linux/include/asm-arm/glue.h - * - * Copyright (C) 1997-1999 Russell King - * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file provides the glue to stick the processor-specific bits - * into the kernel in an efficient manner. The idea is to use branches - * when we're only targetting one class of TLB, or indirect calls - * when we're targetting multiple classes of TLBs. - */ -#ifdef __KERNEL__ - - -#ifdef __STDC__ -#define ____glue(name,fn) name##fn -#else -#define ____glue(name,fn) name/**/fn -#endif -#define __glue(name,fn) ____glue(name,fn) - - - -/* - * Data Abort Model - * ================ - * - * We have the following to choose from: - * arm6 - ARM6 style - * arm7 - ARM7 style - * v4_early - ARMv4 without Thumb early abort handler - * v4t_late - ARMv4 with Thumb late abort handler - * v4t_early - ARMv4 with Thumb early abort handler - * v5tej_early - ARMv5 with Thumb and Java early abort handler - * xscale - ARMv5 with Thumb with Xscale extensions - * v6_early - ARMv6 generic early abort handler - * v7_early - ARMv7 generic early abort handler - */ -#undef CPU_DABORT_HANDLER -#undef MULTI_DABORT - -#if defined(CONFIG_CPU_ARM610) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm6_data_abort -# endif -#endif - -#if defined(CONFIG_CPU_ARM710) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm7_data_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_LV4T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4t_late_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV4 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV4T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4t_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV5TJ -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v5tj_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV5T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v5t_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV6 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v6_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV7 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v7_early_abort -# endif -#endif - -#ifndef CPU_DABORT_HANDLER -#error Unknown data abort handler type -#endif - -/* - * Prefetch abort handler. If the CPU has an IFAR use that, otherwise - * use the address of the aborted instruction - */ -#undef CPU_PABORT_HANDLER -#undef MULTI_PABORT - -#ifdef CONFIG_CPU_PABRT_IFAR -# ifdef CPU_PABORT_HANDLER -# define MULTI_PABORT 1 -# else -# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2 -# endif -#endif - -#ifdef CONFIG_CPU_PABRT_NOIFAR -# ifdef CPU_PABORT_HANDLER -# define MULTI_PABORT 1 -# else -# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn -# endif -#endif - -#ifndef CPU_PABORT_HANDLER -#error Unknown prefetch abort handler type -#endif - -#endif diff --git a/include/asm-arm/gpio.h b/include/asm-arm/gpio.h deleted file mode 100644 index fff4f800ee4..00000000000 --- a/include/asm-arm/gpio.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ARCH_ARM_GPIO_H -#define _ARCH_ARM_GPIO_H - -/* not all ARM platforms necessarily support this API ... */ -#include - -#endif /* _ARCH_ARM_GPIO_H */ diff --git a/include/asm-arm/hardirq.h b/include/asm-arm/hardirq.h deleted file mode 100644 index 182310b9919..00000000000 --- a/include/asm-arm/hardirq.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include -#include -#include - -typedef struct { - unsigned int __softirq_pending; - unsigned int local_timer_irqs; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#if NR_IRQS > 256 -#define HARDIRQ_BITS 9 -#else -#define HARDIRQ_BITS 8 -#endif - -/* - * The hardirq mask has to be large enough to have space - * for potentially all IRQ sources in the system nesting - * on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 - -#endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-arm/hardware.h b/include/asm-arm/hardware.h deleted file mode 100644 index 1fd1a5b6504..00000000000 --- a/include/asm-arm/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/hardware.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Common hardware definitions - */ - -#ifndef __ASM_HARDWARE_H -#define __ASM_HARDWARE_H - -#include - -#endif diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h deleted file mode 100644 index 04be3bdf46b..00000000000 --- a/include/asm-arm/hardware/arm_timer.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H -#define __ASM_ARM_HARDWARE_ARM_TIMER_H - -#define TIMER_LOAD 0x00 -#define TIMER_VALUE 0x04 -#define TIMER_CTRL 0x08 -#define TIMER_CTRL_ONESHOT (1 << 0) -#define TIMER_CTRL_32BIT (1 << 1) -#define TIMER_CTRL_DIV1 (0 << 2) -#define TIMER_CTRL_DIV16 (1 << 2) -#define TIMER_CTRL_DIV256 (2 << 2) -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ -#define TIMER_CTRL_PERIODIC (1 << 6) -#define TIMER_CTRL_ENABLE (1 << 7) - -#define TIMER_INTCLR 0x0c -#define TIMER_RIS 0x10 -#define TIMER_MIS 0x14 -#define TIMER_BGLOAD 0x18 - -#endif diff --git a/include/asm-arm/hardware/arm_twd.h b/include/asm-arm/hardware/arm_twd.h deleted file mode 100644 index e521b70713c..00000000000 --- a/include/asm-arm/hardware/arm_twd.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_HARDWARE_TWD_H -#define __ASM_HARDWARE_TWD_H - -#define TWD_TIMER_LOAD 0x00 -#define TWD_TIMER_COUNTER 0x04 -#define TWD_TIMER_CONTROL 0x08 -#define TWD_TIMER_INTSTAT 0x0C - -#define TWD_WDOG_LOAD 0x20 -#define TWD_WDOG_COUNTER 0x24 -#define TWD_WDOG_CONTROL 0x28 -#define TWD_WDOG_INTSTAT 0x2C -#define TWD_WDOG_RESETSTAT 0x30 -#define TWD_WDOG_DISABLE 0x34 - -#define TWD_TIMER_CONTROL_ENABLE (1 << 0) -#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) -#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) -#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) - -#endif diff --git a/include/asm-arm/hardware/cache-l2x0.h b/include/asm-arm/hardware/cache-l2x0.h deleted file mode 100644 index 54029a74039..00000000000 --- a/include/asm-arm/hardware/cache-l2x0.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-arm/hardware/cache-l2x0.h - * - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_HARDWARE_L2X0_H -#define __ASM_ARM_HARDWARE_L2X0_H - -#define L2X0_CACHE_ID 0x000 -#define L2X0_CACHE_TYPE 0x004 -#define L2X0_CTRL 0x100 -#define L2X0_AUX_CTRL 0x104 -#define L2X0_EVENT_CNT_CTRL 0x200 -#define L2X0_EVENT_CNT1_CFG 0x204 -#define L2X0_EVENT_CNT0_CFG 0x208 -#define L2X0_EVENT_CNT1_VAL 0x20C -#define L2X0_EVENT_CNT0_VAL 0x210 -#define L2X0_INTR_MASK 0x214 -#define L2X0_MASKED_INTR_STAT 0x218 -#define L2X0_RAW_INTR_STAT 0x21C -#define L2X0_INTR_CLEAR 0x220 -#define L2X0_CACHE_SYNC 0x730 -#define L2X0_INV_LINE_PA 0x770 -#define L2X0_INV_WAY 0x77C -#define L2X0_CLEAN_LINE_PA 0x7B0 -#define L2X0_CLEAN_LINE_IDX 0x7B8 -#define L2X0_CLEAN_WAY 0x7BC -#define L2X0_CLEAN_INV_LINE_PA 0x7F0 -#define L2X0_CLEAN_INV_LINE_IDX 0x7F8 -#define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 -#define L2X0_TEST_OPERATION 0xF00 -#define L2X0_LINE_DATA 0xF10 -#define L2X0_LINE_TAG 0xF30 -#define L2X0_DEBUG_CTRL 0xF40 - -#ifndef __ASSEMBLY__ -extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); -#endif - -#endif diff --git a/include/asm-arm/hardware/clps7111.h b/include/asm-arm/hardware/clps7111.h deleted file mode 100644 index 8d3228dc177..00000000000 --- a/include/asm-arm/hardware/clps7111.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * linux/include/asm-arm/hardware/clps7111.h - * - * This file contains the hardware definitions of the CLPS7111 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CLPS7111_H -#define __ASM_HARDWARE_CLPS7111_H - -#define CLPS7111_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) -#define clps_readw(off) __raw_readw(CLPS7111_BASE + (off)) -#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) -#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) -#define clps_writew(val,off) __raw_writew(val, CLPS7111_BASE + (off)) -#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) -#endif - -#define PADR (0x0000) -#define PBDR (0x0001) -#define PDDR (0x0003) -#define PADDR (0x0040) -#define PBDDR (0x0041) -#define PDDDR (0x0043) -#define PEDR (0x0080) -#define PEDDR (0x00c0) -#define SYSCON1 (0x0100) -#define SYSFLG1 (0x0140) -#define MEMCFG1 (0x0180) -#define MEMCFG2 (0x01c0) -#define DRFPR (0x0200) -#define INTSR1 (0x0240) -#define INTMR1 (0x0280) -#define LCDCON (0x02c0) -#define TC1D (0x0300) -#define TC2D (0x0340) -#define RTCDR (0x0380) -#define RTCMR (0x03c0) -#define PMPCON (0x0400) -#define CODR (0x0440) -#define UARTDR1 (0x0480) -#define UBRLCR1 (0x04c0) -#define SYNCIO (0x0500) -#define PALLSW (0x0540) -#define PALMSW (0x0580) -#define STFCLR (0x05c0) -#define BLEOI (0x0600) -#define MCEOI (0x0640) -#define TEOI (0x0680) -#define TC1EOI (0x06c0) -#define TC2EOI (0x0700) -#define RTCEOI (0x0740) -#define UMSEOI (0x0780) -#define COEOI (0x07c0) -#define HALT (0x0800) -#define STDBY (0x0840) - -#define FBADDR (0x1000) -#define SYSCON2 (0x1100) -#define SYSFLG2 (0x1140) -#define INTSR2 (0x1240) -#define INTMR2 (0x1280) -#define UARTDR2 (0x1480) -#define UBRLCR2 (0x14c0) -#define SS2DR (0x1500) -#define SRXEOF (0x1600) -#define SS2POP (0x16c0) -#define KBDEOI (0x1700) - -/* common bits: SYSCON1 / SYSCON2 */ -#define SYSCON_UARTEN (1 << 8) - -#define SYSCON1_KBDSCAN(x) ((x) & 15) -#define SYSCON1_KBDSCANMASK (15) -#define SYSCON1_TC1M (1 << 4) -#define SYSCON1_TC1S (1 << 5) -#define SYSCON1_TC2M (1 << 6) -#define SYSCON1_TC2S (1 << 7) -#define SYSCON1_UART1EN SYSCON_UARTEN -#define SYSCON1_BZTOG (1 << 9) -#define SYSCON1_BZMOD (1 << 10) -#define SYSCON1_DBGEN (1 << 11) -#define SYSCON1_LCDEN (1 << 12) -#define SYSCON1_CDENTX (1 << 13) -#define SYSCON1_CDENRX (1 << 14) -#define SYSCON1_SIREN (1 << 15) -#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) -#define SYSCON1_ADCKSEL_MASK (3 << 16) -#define SYSCON1_EXCKEN (1 << 18) -#define SYSCON1_WAKEDIS (1 << 19) -#define SYSCON1_IRTXM (1 << 20) - -/* common bits: SYSFLG1 / SYSFLG2 */ -#define SYSFLG_UBUSY (1 << 11) -#define SYSFLG_URXFE (1 << 22) -#define SYSFLG_UTXFF (1 << 23) - -#define SYSFLG1_MCDR (1 << 0) -#define SYSFLG1_DCDET (1 << 1) -#define SYSFLG1_WUDR (1 << 2) -#define SYSFLG1_WUON (1 << 3) -#define SYSFLG1_CTS (1 << 8) -#define SYSFLG1_DSR (1 << 9) -#define SYSFLG1_DCD (1 << 10) -#define SYSFLG1_UBUSY SYSFLG_UBUSY -#define SYSFLG1_NBFLG (1 << 12) -#define SYSFLG1_RSTFLG (1 << 13) -#define SYSFLG1_PFFLG (1 << 14) -#define SYSFLG1_CLDFLG (1 << 15) -#define SYSFLG1_URXFE SYSFLG_URXFE -#define SYSFLG1_UTXFF SYSFLG_UTXFF -#define SYSFLG1_CRXFE (1 << 24) -#define SYSFLG1_CTXFF (1 << 25) -#define SYSFLG1_SSIBUSY (1 << 26) -#define SYSFLG1_ID (1 << 29) - -#define SYSFLG2_SSRXOF (1 << 0) -#define SYSFLG2_RESVAL (1 << 1) -#define SYSFLG2_RESFRM (1 << 2) -#define SYSFLG2_SS2RXFE (1 << 3) -#define SYSFLG2_SS2TXFF (1 << 4) -#define SYSFLG2_SS2TXUF (1 << 5) -#define SYSFLG2_CKMODE (1 << 6) -#define SYSFLG2_UBUSY SYSFLG_UBUSY -#define SYSFLG2_URXFE SYSFLG_URXFE -#define SYSFLG2_UTXFF SYSFLG_UTXFF - -#define LCDCON_GSEN (1 << 30) -#define LCDCON_GSMD (1 << 31) - -#define SYSCON2_SERSEL (1 << 0) -#define SYSCON2_KBD6 (1 << 1) -#define SYSCON2_DRAMZ (1 << 2) -#define SYSCON2_KBWEN (1 << 3) -#define SYSCON2_SS2TXEN (1 << 4) -#define SYSCON2_PCCARD1 (1 << 5) -#define SYSCON2_PCCARD2 (1 << 6) -#define SYSCON2_SS2RXEN (1 << 7) -#define SYSCON2_UART2EN SYSCON_UARTEN -#define SYSCON2_SS2MAEN (1 << 9) -#define SYSCON2_OSTB (1 << 12) -#define SYSCON2_CLKENSL (1 << 13) -#define SYSCON2_BUZFREQ (1 << 14) - -/* common bits: UARTDR1 / UARTDR2 */ -#define UARTDR_FRMERR (1 << 8) -#define UARTDR_PARERR (1 << 9) -#define UARTDR_OVERR (1 << 10) - -/* common bits: UBRLCR1 / UBRLCR2 */ -#define UBRLCR_BAUD_MASK ((1 << 12) - 1) -#define UBRLCR_BREAK (1 << 12) -#define UBRLCR_PRTEN (1 << 13) -#define UBRLCR_EVENPRT (1 << 14) -#define UBRLCR_XSTOP (1 << 15) -#define UBRLCR_FIFOEN (1 << 16) -#define UBRLCR_WRDLEN5 (0 << 17) -#define UBRLCR_WRDLEN6 (1 << 17) -#define UBRLCR_WRDLEN7 (2 << 17) -#define UBRLCR_WRDLEN8 (3 << 17) -#define UBRLCR_WRDLEN_MASK (3 << 17) - -#define SYNCIO_SMCKEN (1 << 13) -#define SYNCIO_TXFRMEN (1 << 14) - -#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/include/asm-arm/hardware/cs89712.h b/include/asm-arm/hardware/cs89712.h deleted file mode 100644 index ad99a3e1b80..00000000000 --- a/include/asm-arm/hardware/cs89712.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/hardware/cs89712.h - * - * This file contains the hardware definitions of the CS89712 - * additional internal registers. - * - * Copyright (C) 2001 Thomas Gleixner autronix automation - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CS89712_H -#define __ASM_HARDWARE_CS89712_H - -/* -* CS89712 additional registers -*/ - -#define PCDR 0x0002 /* Port C Data register ---------------------------- */ -#define PCDDR 0x0042 /* Port C Data Direction register ------------------ */ -#define SDCONF 0x2300 /* SDRAM Configuration register ---------------------*/ -#define SDRFPR 0x2340 /* SDRAM Refresh period register --------------------*/ - -#define SDCONF_ACTIVE (1 << 10) -#define SDCONF_CLKCTL (1 << 9) -#define SDCONF_WIDTH_4 (0 << 7) -#define SDCONF_WIDTH_8 (1 << 7) -#define SDCONF_WIDTH_16 (2 << 7) -#define SDCONF_WIDTH_32 (3 << 7) -#define SDCONF_SIZE_16 (0 << 5) -#define SDCONF_SIZE_64 (1 << 5) -#define SDCONF_SIZE_128 (2 << 5) -#define SDCONF_SIZE_256 (3 << 5) -#define SDCONF_CASLAT_2 (2) -#define SDCONF_CASLAT_3 (3) - -#endif /* __ASM_HARDWARE_CS89712_H */ diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S deleted file mode 100644 index 07c97fb233f..00000000000 --- a/include/asm-arm/hardware/debug-8250.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/hardware/debug-8250.S - * - * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - - .macro senduart,rd,rx - strb \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - .macro waituart,rd,rx -#ifdef FLOW_CONTROL -1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -#endif - .endm diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S deleted file mode 100644 index 23c541a9e89..00000000000 --- a/include/asm-arm/hardware/debug-pl01x.S +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/hardware/debug-pl01x.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ -#include - - .macro senduart,rd,rx - strb \rd, [\rx, #UART01x_DR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UART01x_FR] - tst \rd, #UART01x_FR_TXFF - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UART01x_FR] - tst \rd, #UART01x_FR_BUSY - bne 1001b - .endm diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h deleted file mode 100644 index 546f7077be9..00000000000 --- a/include/asm-arm/hardware/dec21285.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/include/asm-arm/hardware/dec21285.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * DC21285 registers - */ -#define DC21285_PCI_IACK 0x79000000 -#define DC21285_ARMCSR_BASE 0x42000000 -#define DC21285_PCI_TYPE_0_CONFIG 0x7b000000 -#define DC21285_PCI_TYPE_1_CONFIG 0x7a000000 -#define DC21285_OUTBOUND_WRITE_FLUSH 0x78000000 -#define DC21285_FLASH 0x41000000 -#define DC21285_PCI_IO 0x7c000000 -#define DC21285_PCI_MEM 0x80000000 - -#ifndef __ASSEMBLY__ -#include -#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) -#else -#define DC21285_IO(x) (x) -#endif - -#define CSR_PCICMD DC21285_IO(0x0004) -#define CSR_CLASSREV DC21285_IO(0x0008) -#define CSR_PCICACHELINESIZE DC21285_IO(0x000c) -#define CSR_PCICSRBASE DC21285_IO(0x0010) -#define CSR_PCICSRIOBASE DC21285_IO(0x0014) -#define CSR_PCISDRAMBASE DC21285_IO(0x0018) -#define CSR_PCIROMBASE DC21285_IO(0x0030) -#define CSR_MBOX0 DC21285_IO(0x0050) -#define CSR_MBOX1 DC21285_IO(0x0054) -#define CSR_MBOX2 DC21285_IO(0x0058) -#define CSR_MBOX3 DC21285_IO(0x005c) -#define CSR_DOORBELL DC21285_IO(0x0060) -#define CSR_DOORBELL_SETUP DC21285_IO(0x0064) -#define CSR_ROMWRITEREG DC21285_IO(0x0068) -#define CSR_CSRBASEMASK DC21285_IO(0x00f8) -#define CSR_CSRBASEOFFSET DC21285_IO(0x00fc) -#define CSR_SDRAMBASEMASK DC21285_IO(0x0100) -#define CSR_SDRAMBASEOFFSET DC21285_IO(0x0104) -#define CSR_ROMBASEMASK DC21285_IO(0x0108) -#define CSR_SDRAMTIMING DC21285_IO(0x010c) -#define CSR_SDRAMADDRSIZE0 DC21285_IO(0x0110) -#define CSR_SDRAMADDRSIZE1 DC21285_IO(0x0114) -#define CSR_SDRAMADDRSIZE2 DC21285_IO(0x0118) -#define CSR_SDRAMADDRSIZE3 DC21285_IO(0x011c) -#define CSR_I2O_INFREEHEAD DC21285_IO(0x0120) -#define CSR_I2O_INPOSTTAIL DC21285_IO(0x0124) -#define CSR_I2O_OUTPOSTHEAD DC21285_IO(0x0128) -#define CSR_I2O_OUTFREETAIL DC21285_IO(0x012c) -#define CSR_I2O_INFREECOUNT DC21285_IO(0x0130) -#define CSR_I2O_OUTPOSTCOUNT DC21285_IO(0x0134) -#define CSR_I2O_INPOSTCOUNT DC21285_IO(0x0138) -#define CSR_SA110_CNTL DC21285_IO(0x013c) -#define SA110_CNTL_INITCMPLETE (1 << 0) -#define SA110_CNTL_ASSERTSERR (1 << 1) -#define SA110_CNTL_RXSERR (1 << 3) -#define SA110_CNTL_SA110DRAMPARITY (1 << 4) -#define SA110_CNTL_PCISDRAMPARITY (1 << 5) -#define SA110_CNTL_DMASDRAMPARITY (1 << 6) -#define SA110_CNTL_DISCARDTIMER (1 << 8) -#define SA110_CNTL_PCINRESET (1 << 9) -#define SA110_CNTL_I2O_256 (0 << 10) -#define SA110_CNTL_I20_512 (1 << 10) -#define SA110_CNTL_I2O_1024 (2 << 10) -#define SA110_CNTL_I2O_2048 (3 << 10) -#define SA110_CNTL_I2O_4096 (4 << 10) -#define SA110_CNTL_I2O_8192 (5 << 10) -#define SA110_CNTL_I2O_16384 (6 << 10) -#define SA110_CNTL_I2O_32768 (7 << 10) -#define SA110_CNTL_WATCHDOG (1 << 13) -#define SA110_CNTL_ROMWIDTH_UNDEF (0 << 14) -#define SA110_CNTL_ROMWIDTH_16 (1 << 14) -#define SA110_CNTL_ROMWIDTH_32 (2 << 14) -#define SA110_CNTL_ROMWIDTH_8 (3 << 14) -#define SA110_CNTL_ROMACCESSTIME(x) ((x)<<16) -#define SA110_CNTL_ROMBURSTTIME(x) ((x)<<20) -#define SA110_CNTL_ROMTRISTATETIME(x) ((x)<<24) -#define SA110_CNTL_XCSDIR(x) ((x)<<28) -#define SA110_CNTL_PCICFN (1 << 31) - -/* - * footbridge_cfn_mode() is used when we want - * to check whether we are the central function - */ -#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) -#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) -#define footbridge_cfn_mode() __footbridge_cfn_mode() -#elif defined(CONFIG_FOOTBRIDGE_HOST) -#define footbridge_cfn_mode() (1) -#else -#define footbridge_cfn_mode() (0) -#endif - -#define CSR_PCIADDR_EXTN DC21285_IO(0x0140) -#define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) -#define CSR_XBUS_CYCLE DC21285_IO(0x0148) -#define CSR_XBUS_IOSTROBE DC21285_IO(0x014c) -#define CSR_DOORBELL_PCI DC21285_IO(0x0150) -#define CSR_DOORBELL_SA110 DC21285_IO(0x0154) -#define CSR_UARTDR DC21285_IO(0x0160) -#define CSR_RXSTAT DC21285_IO(0x0164) -#define CSR_H_UBRLCR DC21285_IO(0x0168) -#define CSR_M_UBRLCR DC21285_IO(0x016c) -#define CSR_L_UBRLCR DC21285_IO(0x0170) -#define CSR_UARTCON DC21285_IO(0x0174) -#define CSR_UARTFLG DC21285_IO(0x0178) -#define CSR_IRQ_STATUS DC21285_IO(0x0180) -#define CSR_IRQ_RAWSTATUS DC21285_IO(0x0184) -#define CSR_IRQ_ENABLE DC21285_IO(0x0188) -#define CSR_IRQ_DISABLE DC21285_IO(0x018c) -#define CSR_IRQ_SOFT DC21285_IO(0x0190) -#define CSR_FIQ_STATUS DC21285_IO(0x0280) -#define CSR_FIQ_RAWSTATUS DC21285_IO(0x0284) -#define CSR_FIQ_ENABLE DC21285_IO(0x0288) -#define CSR_FIQ_DISABLE DC21285_IO(0x028c) -#define CSR_FIQ_SOFT DC21285_IO(0x0290) -#define CSR_TIMER1_LOAD DC21285_IO(0x0300) -#define CSR_TIMER1_VALUE DC21285_IO(0x0304) -#define CSR_TIMER1_CNTL DC21285_IO(0x0308) -#define CSR_TIMER1_CLR DC21285_IO(0x030c) -#define CSR_TIMER2_LOAD DC21285_IO(0x0320) -#define CSR_TIMER2_VALUE DC21285_IO(0x0324) -#define CSR_TIMER2_CNTL DC21285_IO(0x0328) -#define CSR_TIMER2_CLR DC21285_IO(0x032c) -#define CSR_TIMER3_LOAD DC21285_IO(0x0340) -#define CSR_TIMER3_VALUE DC21285_IO(0x0344) -#define CSR_TIMER3_CNTL DC21285_IO(0x0348) -#define CSR_TIMER3_CLR DC21285_IO(0x034c) -#define CSR_TIMER4_LOAD DC21285_IO(0x0360) -#define CSR_TIMER4_VALUE DC21285_IO(0x0364) -#define CSR_TIMER4_CNTL DC21285_IO(0x0368) -#define CSR_TIMER4_CLR DC21285_IO(0x036c) - -#define TIMER_CNTL_ENABLE (1 << 7) -#define TIMER_CNTL_AUTORELOAD (1 << 6) -#define TIMER_CNTL_DIV1 (0) -#define TIMER_CNTL_DIV16 (1 << 2) -#define TIMER_CNTL_DIV256 (2 << 2) -#define TIMER_CNTL_CNTEXT (3 << 2) - - diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S deleted file mode 100644 index 9bb580a5b15..00000000000 --- a/include/asm-arm/hardware/entry-macro-iomd.S +++ /dev/null @@ -1,139 +0,0 @@ -/* - * include/asm-arm/hardware/entry-macro-iomd.S - * - * Low-level IRQ helper macros for IOC/IOMD based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* IOC / IOMD based hardware */ -#include - - .macro disable_fiq - mov r12, #ioc_base_high - .if ioc_base_low - orr r12, r12, #ioc_base_low - .endif - strb r12, [r12, #0x38] @ Disable FIQ register - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first - ldr \tmp, =irq_prio_h - teq \irqstat, #0 -#ifdef IOMD_BASE - ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma - addeq \tmp, \tmp, #256 @ irq_prio_h table size - teqeq \irqstat, #0 - bne 2406f -#endif - ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority - addeq \tmp, \tmp, #256 @ irq_prio_d table size - teqeq \irqstat, #0 -#ifdef IOMD_IRQREQC - ldreqb \irqstat, [\base, #IOMD_IRQREQC] - addeq \tmp, \tmp, #256 @ irq_prio_l table size - teqeq \irqstat, #0 -#endif -#ifdef IOMD_IRQREQD - ldreqb \irqstat, [\base, #IOMD_IRQREQD] - addeq \tmp, \tmp, #256 @ irq_prio_lc table size - teqeq \irqstat, #0 -#endif -2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number - .endm - -/* - * Interrupt table (incorporates priority). Please note that we - * rely on the order of these tables (see above code). - */ - .align 5 -irq_prio_h: .byte 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 -#ifdef IOMD_BASE -irq_prio_d: .byte 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 -#endif -irq_prio_l: .byte 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -#ifdef IOMD_IRQREQC -irq_prio_lc: .byte 24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 - .byte 28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 - .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 -#endif -#ifdef IOMD_IRQREQD -irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 - .byte 44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 - .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 -#endif - diff --git a/include/asm-arm/hardware/ep7211.h b/include/asm-arm/hardware/ep7211.h deleted file mode 100644 index 017aa68f612..00000000000 --- a/include/asm-arm/hardware/ep7211.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ep7211.h - * - * This file contains the hardware definitions of the EP7211 internal - * registers. - * - * Copyright (C) 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_EP7211_H -#define __ASM_HARDWARE_EP7211_H - -#include - -/* - * define EP7211_BASE to be the base address of the region - * you want to access. - */ - -#define EP7211_PHYS_BASE (0x80000000) - -/* - * XXX miket@bluemug.com: need to introduce EP7211 registers (those not - * present in 7212) here. - */ - -#endif /* __ASM_HARDWARE_EP7211_H */ diff --git a/include/asm-arm/hardware/ep7212.h b/include/asm-arm/hardware/ep7212.h deleted file mode 100644 index 0e952e74707..00000000000 --- a/include/asm-arm/hardware/ep7212.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ep7212.h - * - * This file contains the hardware definitions of the EP7212 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_EP7212_H -#define __ASM_HARDWARE_EP7212_H - -/* - * define EP7212_BASE to be the base address of the region - * you want to access. - */ - -#define EP7212_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define ep_readl(off) __raw_readl(EP7212_BASE + (off)) -#define ep_writel(val,off) __raw_writel(val, EP7212_BASE + (off)) -#endif - -/* - * These registers are specific to the EP7212 only - */ -#define DAIR 0x2000 -#define DAIR0 0x2040 -#define DAIDR1 0x2080 -#define DAIDR2 0x20c0 -#define DAISR 0x2100 -#define SYSCON3 0x2200 -#define INTSR3 0x2240 -#define INTMR3 0x2280 -#define LEDFLSH 0x22c0 - -#define DAIR_DAIEN (1 << 16) -#define DAIR_ECS (1 << 17) -#define DAIR_LCTM (1 << 19) -#define DAIR_LCRM (1 << 20) -#define DAIR_RCTM (1 << 21) -#define DAIR_RCRM (1 << 22) -#define DAIR_LBM (1 << 23) - -#define DAIDR2_FIFOEN (1 << 15) -#define DAIDR2_FIFOLEFT (0x0d << 16) -#define DAIDR2_FIFORIGHT (0x11 << 16) - -#define DAISR_RCTS (1 << 0) -#define DAISR_RCRS (1 << 1) -#define DAISR_LCTS (1 << 2) -#define DAISR_LCRS (1 << 3) -#define DAISR_RCTU (1 << 4) -#define DAISR_RCRO (1 << 5) -#define DAISR_LCTU (1 << 6) -#define DAISR_LCRO (1 << 7) -#define DAISR_RCNF (1 << 8) -#define DAISR_RCNE (1 << 9) -#define DAISR_LCNF (1 << 10) -#define DAISR_LCNE (1 << 11) -#define DAISR_FIFO (1 << 12) - -#define SYSCON3_ADCCON (1 << 0) -#define SYSCON3_DAISEL (1 << 3) -#define SYSCON3_ADCCKNSEN (1 << 4) -#define SYSCON3_FASTWAKE (1 << 8) -#define SYSCON3_DAIEN (1 << 9) - -#endif /* __ASM_HARDWARE_EP7212_H */ diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h deleted file mode 100644 index 966e428ad32..00000000000 --- a/include/asm-arm/hardware/gic.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/include/asm-arm/hardware/gic.h - * - * Copyright (C) 2002 ARM Limited, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_HARDWARE_GIC_H -#define __ASM_ARM_HARDWARE_GIC_H - -#include - -#define GIC_CPU_CTRL 0x00 -#define GIC_CPU_PRIMASK 0x04 -#define GIC_CPU_BINPOINT 0x08 -#define GIC_CPU_INTACK 0x0c -#define GIC_CPU_EOI 0x10 -#define GIC_CPU_RUNNINGPRI 0x14 -#define GIC_CPU_HIGHPRI 0x18 - -#define GIC_DIST_CTRL 0x000 -#define GIC_DIST_CTR 0x004 -#define GIC_DIST_ENABLE_SET 0x100 -#define GIC_DIST_ENABLE_CLEAR 0x180 -#define GIC_DIST_PENDING_SET 0x200 -#define GIC_DIST_PENDING_CLEAR 0x280 -#define GIC_DIST_ACTIVE_BIT 0x300 -#define GIC_DIST_PRI 0x400 -#define GIC_DIST_TARGET 0x800 -#define GIC_DIST_CONFIG 0xc00 -#define GIC_DIST_SOFTINT 0xf00 - -#ifndef __ASSEMBLY__ -void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); -void gic_cpu_init(unsigned int gic_nr, void __iomem *base); -void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); -#endif - -#endif diff --git a/include/asm-arm/hardware/icst307.h b/include/asm-arm/hardware/icst307.h deleted file mode 100644 index ff8618a441c..00000000000 --- a/include/asm-arm/hardware/icst307.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/hardware/icst307.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICS307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This file is similar to the icst525.h file - */ -#ifndef ASMARM_HARDWARE_ICST307_H -#define ASMARM_HARDWARE_ICST307_H - -struct icst307_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst307_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); -struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); -struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); - -#endif diff --git a/include/asm-arm/hardware/icst525.h b/include/asm-arm/hardware/icst525.h deleted file mode 100644 index edd5a570440..00000000000 --- a/include/asm-arm/hardware/icst525.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/hardware/icst525.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#ifndef ASMARM_HARDWARE_ICST525_H -#define ASMARM_HARDWARE_ICST525_H - -struct icst525_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst525_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); -struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); -struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); - -#endif diff --git a/include/asm-arm/hardware/ioc.h b/include/asm-arm/hardware/ioc.h deleted file mode 100644 index b3b46ef6594..00000000000 --- a/include/asm-arm/hardware/ioc.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ioc.h - * - * Copyright (C) Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Use these macros to read/write the IOC. All it does is perform the actual - * read/write. - */ -#ifndef __ASMARM_HARDWARE_IOC_H -#define __ASMARM_HARDWARE_IOC_H - -#ifndef __ASSEMBLY__ - -/* - * We use __raw_base variants here so that we give the compiler the - * chance to keep IOC_BASE in a register. - */ -#define ioc_readb(off) __raw_readb(IOC_BASE + (off)) -#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off)) - -#endif - -#define IOC_CONTROL (0x00) -#define IOC_KARTTX (0x04) -#define IOC_KARTRX (0x04) - -#define IOC_IRQSTATA (0x10) -#define IOC_IRQREQA (0x14) -#define IOC_IRQCLRA (0x14) -#define IOC_IRQMASKA (0x18) - -#define IOC_IRQSTATB (0x20) -#define IOC_IRQREQB (0x24) -#define IOC_IRQMASKB (0x28) - -#define IOC_FIQSTAT (0x30) -#define IOC_FIQREQ (0x34) -#define IOC_FIQMASK (0x38) - -#define IOC_T0CNTL (0x40) -#define IOC_T0LTCHL (0x40) -#define IOC_T0CNTH (0x44) -#define IOC_T0LTCHH (0x44) -#define IOC_T0GO (0x48) -#define IOC_T0LATCH (0x4c) - -#define IOC_T1CNTL (0x50) -#define IOC_T1LTCHL (0x50) -#define IOC_T1CNTH (0x54) -#define IOC_T1LTCHH (0x54) -#define IOC_T1GO (0x58) -#define IOC_T1LATCH (0x5c) - -#define IOC_T2CNTL (0x60) -#define IOC_T2LTCHL (0x60) -#define IOC_T2CNTH (0x64) -#define IOC_T2LTCHH (0x64) -#define IOC_T2GO (0x68) -#define IOC_T2LATCH (0x6c) - -#define IOC_T3CNTL (0x70) -#define IOC_T3LTCHL (0x70) -#define IOC_T3CNTH (0x74) -#define IOC_T3LTCHH (0x74) -#define IOC_T3GO (0x78) -#define IOC_T3LATCH (0x7c) - -#endif diff --git a/include/asm-arm/hardware/iomd.h b/include/asm-arm/hardware/iomd.h deleted file mode 100644 index 396e55ad06c..00000000000 --- a/include/asm-arm/hardware/iomd.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * linux/include/asm-arm/hardware/iomd.h - * - * Copyright (C) 1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains information out the IOMD ASIC used in the - * Acorn RiscPC and subsequently integrated into the CLPS7500 chips. - */ -#ifndef __ASMARM_HARDWARE_IOMD_H -#define __ASMARM_HARDWARE_IOMD_H - - -#ifndef __ASSEMBLY__ - -/* - * We use __raw_base variants here so that we give the compiler the - * chance to keep IOC_BASE in a register. - */ -#define iomd_readb(off) __raw_readb(IOMD_BASE + (off)) -#define iomd_readl(off) __raw_readl(IOMD_BASE + (off)) -#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off)) -#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off)) - -#endif - -#define IOMD_CONTROL (0x000) -#define IOMD_KARTTX (0x004) -#define IOMD_KARTRX (0x004) -#define IOMD_KCTRL (0x008) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_IOLINES (0x00C) -#endif - -#define IOMD_IRQSTATA (0x010) -#define IOMD_IRQREQA (0x014) -#define IOMD_IRQCLRA (0x014) -#define IOMD_IRQMASKA (0x018) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_SUSMODE (0x01C) -#endif - -#define IOMD_IRQSTATB (0x020) -#define IOMD_IRQREQB (0x024) -#define IOMD_IRQMASKB (0x028) - -#define IOMD_FIQSTAT (0x030) -#define IOMD_FIQREQ (0x034) -#define IOMD_FIQMASK (0x038) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_CLKCTL (0x03C) -#endif - -#define IOMD_T0CNTL (0x040) -#define IOMD_T0LTCHL (0x040) -#define IOMD_T0CNTH (0x044) -#define IOMD_T0LTCHH (0x044) -#define IOMD_T0GO (0x048) -#define IOMD_T0LATCH (0x04c) - -#define IOMD_T1CNTL (0x050) -#define IOMD_T1LTCHL (0x050) -#define IOMD_T1CNTH (0x054) -#define IOMD_T1LTCHH (0x054) -#define IOMD_T1GO (0x058) -#define IOMD_T1LATCH (0x05c) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_IRQSTATC (0x060) -#define IOMD_IRQREQC (0x064) -#define IOMD_IRQMASKC (0x068) - -#define IOMD_VIDMUX (0x06c) - -#define IOMD_IRQSTATD (0x070) -#define IOMD_IRQREQD (0x074) -#define IOMD_IRQMASKD (0x078) -#endif - -#define IOMD_ROMCR0 (0x080) -#define IOMD_ROMCR1 (0x084) -#ifdef CONFIG_ARCH_RPC -#define IOMD_DRAMCR (0x088) -#endif -#define IOMD_REFCR (0x08C) - -#define IOMD_FSIZE (0x090) -#define IOMD_ID0 (0x094) -#define IOMD_ID1 (0x098) -#define IOMD_VERSION (0x09C) - -#ifdef CONFIG_ARCH_RPC -#define IOMD_MOUSEX (0x0A0) -#define IOMD_MOUSEY (0x0A4) -#endif - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_MSEDAT (0x0A8) -#define IOMD_MSECTL (0x0Ac) -#endif - -#ifdef CONFIG_ARCH_RPC -#define IOMD_DMATCR (0x0C0) -#endif -#define IOMD_IOTCR (0x0C4) -#define IOMD_ECTCR (0x0C8) -#ifdef CONFIG_ARCH_RPC -#define IOMD_DMAEXT (0x0CC) -#endif -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_ASTCR (0x0CC) -#define IOMD_DRAMCR (0x0D0) -#define IOMD_SELFREF (0x0D4) -#define IOMD_ATODICR (0x0E0) -#define IOMD_ATODSR (0x0E4) -#define IOMD_ATODCC (0x0E8) -#define IOMD_ATODCNT1 (0x0EC) -#define IOMD_ATODCNT2 (0x0F0) -#define IOMD_ATODCNT3 (0x0F4) -#define IOMD_ATODCNT4 (0x0F8) -#endif - -#ifdef CONFIG_ARCH_RPC -#define DMA_EXT_IO0 1 -#define DMA_EXT_IO1 2 -#define DMA_EXT_IO2 4 -#define DMA_EXT_IO3 8 - -#define IOMD_IO0CURA (0x100) -#define IOMD_IO0ENDA (0x104) -#define IOMD_IO0CURB (0x108) -#define IOMD_IO0ENDB (0x10C) -#define IOMD_IO0CR (0x110) -#define IOMD_IO0ST (0x114) - -#define IOMD_IO1CURA (0x120) -#define IOMD_IO1ENDA (0x124) -#define IOMD_IO1CURB (0x128) -#define IOMD_IO1ENDB (0x12C) -#define IOMD_IO1CR (0x130) -#define IOMD_IO1ST (0x134) - -#define IOMD_IO2CURA (0x140) -#define IOMD_IO2ENDA (0x144) -#define IOMD_IO2CURB (0x148) -#define IOMD_IO2ENDB (0x14C) -#define IOMD_IO2CR (0x150) -#define IOMD_IO2ST (0x154) - -#define IOMD_IO3CURA (0x160) -#define IOMD_IO3ENDA (0x164) -#define IOMD_IO3CURB (0x168) -#define IOMD_IO3ENDB (0x16C) -#define IOMD_IO3CR (0x170) -#define IOMD_IO3ST (0x174) -#endif - -#define IOMD_SD0CURA (0x180) -#define IOMD_SD0ENDA (0x184) -#define IOMD_SD0CURB (0x188) -#define IOMD_SD0ENDB (0x18C) -#define IOMD_SD0CR (0x190) -#define IOMD_SD0ST (0x194) - -#ifdef CONFIG_ARCH_RPC -#define IOMD_SD1CURA (0x1A0) -#define IOMD_SD1ENDA (0x1A4) -#define IOMD_SD1CURB (0x1A8) -#define IOMD_SD1ENDB (0x1AC) -#define IOMD_SD1CR (0x1B0) -#define IOMD_SD1ST (0x1B4) -#endif - -#define IOMD_CURSCUR (0x1C0) -#define IOMD_CURSINIT (0x1C4) - -#define IOMD_VIDCUR (0x1D0) -#define IOMD_VIDEND (0x1D4) -#define IOMD_VIDSTART (0x1D8) -#define IOMD_VIDINIT (0x1DC) -#define IOMD_VIDCR (0x1E0) - -#define IOMD_DMASTAT (0x1F0) -#define IOMD_DMAREQ (0x1F4) -#define IOMD_DMAMASK (0x1F8) - -#define DMA_END_S (1 << 31) -#define DMA_END_L (1 << 30) - -#define DMA_CR_C 0x80 -#define DMA_CR_D 0x40 -#define DMA_CR_E 0x20 - -#define DMA_ST_OFL 4 -#define DMA_ST_INT 2 -#define DMA_ST_AB 1 - -/* - * DMA (MEMC) compatibility - */ -#define HALF_SAM vram_half_sam -#define VDMA_ALIGNMENT (HALF_SAM * 2) -#define VDMA_XFERSIZE (HALF_SAM) -#define VDMA_INIT IOMD_VIDINIT -#define VDMA_START IOMD_VIDSTART -#define VDMA_END IOMD_VIDEND - -#ifndef __ASSEMBLY__ -extern unsigned int vram_half_sam; -#define video_set_dma(start,end,offset) \ -do { \ - outl (SCREEN_START + start, VDMA_START); \ - outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \ - if (offset >= end - VDMA_XFERSIZE) \ - offset |= 0x40000000; \ - outl (SCREEN_START + offset, VDMA_INIT); \ -} while (0) -#endif - -#endif diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h deleted file mode 100644 index af64676650a..00000000000 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ /dev/null @@ -1,888 +0,0 @@ -/* - * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -#ifndef _ADMA_H -#define _ADMA_H -#include -#include -#include -#include - -/* Memory copy units */ -#define DMA_CCR(chan) (chan->mmr_base + 0x0) -#define DMA_CSR(chan) (chan->mmr_base + 0x4) -#define DMA_DAR(chan) (chan->mmr_base + 0xc) -#define DMA_NDAR(chan) (chan->mmr_base + 0x10) -#define DMA_PADR(chan) (chan->mmr_base + 0x14) -#define DMA_PUADR(chan) (chan->mmr_base + 0x18) -#define DMA_LADR(chan) (chan->mmr_base + 0x1c) -#define DMA_BCR(chan) (chan->mmr_base + 0x20) -#define DMA_DCR(chan) (chan->mmr_base + 0x24) - -/* Application accelerator unit */ -#define AAU_ACR(chan) (chan->mmr_base + 0x0) -#define AAU_ASR(chan) (chan->mmr_base + 0x4) -#define AAU_ADAR(chan) (chan->mmr_base + 0x8) -#define AAU_ANDAR(chan) (chan->mmr_base + 0xc) -#define AAU_SAR(src, chan) (chan->mmr_base + (0x10 + ((src) << 2))) -#define AAU_DAR(chan) (chan->mmr_base + 0x20) -#define AAU_ABCR(chan) (chan->mmr_base + 0x24) -#define AAU_ADCR(chan) (chan->mmr_base + 0x28) -#define AAU_SAR_EDCR(src_edc) (chan->mmr_base + (0x02c + ((src_edc-4) << 2))) -#define AAU_EDCR0_IDX 8 -#define AAU_EDCR1_IDX 17 -#define AAU_EDCR2_IDX 26 - -#define DMA0_ID 0 -#define DMA1_ID 1 -#define AAU_ID 2 - -struct iop3xx_aau_desc_ctrl { - unsigned int int_en:1; - unsigned int blk1_cmd_ctrl:3; - unsigned int blk2_cmd_ctrl:3; - unsigned int blk3_cmd_ctrl:3; - unsigned int blk4_cmd_ctrl:3; - unsigned int blk5_cmd_ctrl:3; - unsigned int blk6_cmd_ctrl:3; - unsigned int blk7_cmd_ctrl:3; - unsigned int blk8_cmd_ctrl:3; - unsigned int blk_ctrl:2; - unsigned int dual_xor_en:1; - unsigned int tx_complete:1; - unsigned int zero_result_err:1; - unsigned int zero_result_en:1; - unsigned int dest_write_en:1; -}; - -struct iop3xx_aau_e_desc_ctrl { - unsigned int reserved:1; - unsigned int blk1_cmd_ctrl:3; - unsigned int blk2_cmd_ctrl:3; - unsigned int blk3_cmd_ctrl:3; - unsigned int blk4_cmd_ctrl:3; - unsigned int blk5_cmd_ctrl:3; - unsigned int blk6_cmd_ctrl:3; - unsigned int blk7_cmd_ctrl:3; - unsigned int blk8_cmd_ctrl:3; - unsigned int reserved2:7; -}; - -struct iop3xx_dma_desc_ctrl { - unsigned int pci_transaction:4; - unsigned int int_en:1; - unsigned int dac_cycle_en:1; - unsigned int mem_to_mem_en:1; - unsigned int crc_data_tx_en:1; - unsigned int crc_gen_en:1; - unsigned int crc_seed_dis:1; - unsigned int reserved:21; - unsigned int crc_tx_complete:1; -}; - -struct iop3xx_desc_dma { - u32 next_desc; - union { - u32 pci_src_addr; - u32 pci_dest_addr; - u32 src_addr; - }; - union { - u32 upper_pci_src_addr; - u32 upper_pci_dest_addr; - }; - union { - u32 local_pci_src_addr; - u32 local_pci_dest_addr; - u32 dest_addr; - }; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_dma_desc_ctrl desc_ctrl_field; - }; - u32 crc_addr; -}; - -struct iop3xx_desc_aau { - u32 next_desc; - u32 src[4]; - u32 dest_addr; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_aau_desc_ctrl desc_ctrl_field; - }; - union { - u32 src_addr; - u32 e_desc_ctrl; - struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; - } src_edc[31]; -}; - -struct iop3xx_aau_gfmr { - unsigned int gfmr1:8; - unsigned int gfmr2:8; - unsigned int gfmr3:8; - unsigned int gfmr4:8; -}; - -struct iop3xx_desc_pq_xor { - u32 next_desc; - u32 src[3]; - union { - u32 data_mult1; - struct iop3xx_aau_gfmr data_mult1_field; - }; - u32 dest_addr; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_aau_desc_ctrl desc_ctrl_field; - }; - union { - u32 src_addr; - u32 e_desc_ctrl; - struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; - u32 data_multiplier; - struct iop3xx_aau_gfmr data_mult_field; - u32 reserved; - } src_edc_gfmr[19]; -}; - -struct iop3xx_desc_dual_xor { - u32 next_desc; - u32 src0_addr; - u32 src1_addr; - u32 h_src_addr; - u32 d_src_addr; - u32 h_dest_addr; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_aau_desc_ctrl desc_ctrl_field; - }; - u32 d_dest_addr; -}; - -union iop3xx_desc { - struct iop3xx_desc_aau *aau; - struct iop3xx_desc_dma *dma; - struct iop3xx_desc_pq_xor *pq_xor; - struct iop3xx_desc_dual_xor *dual_xor; - void *ptr; -}; - -static inline int iop_adma_get_max_xor(void) -{ - return 32; -} - -static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) -{ - int id = chan->device->id; - - switch (id) { - case DMA0_ID: - case DMA1_ID: - return __raw_readl(DMA_DAR(chan)); - case AAU_ID: - return __raw_readl(AAU_ADAR(chan)); - default: - BUG(); - } - return 0; -} - -static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan, - u32 next_desc_addr) -{ - int id = chan->device->id; - - switch (id) { - case DMA0_ID: - case DMA1_ID: - __raw_writel(next_desc_addr, DMA_NDAR(chan)); - break; - case AAU_ID: - __raw_writel(next_desc_addr, AAU_ANDAR(chan)); - break; - } - -} - -#define IOP_ADMA_STATUS_BUSY (1 << 10) -#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024) -#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024) -#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) - -static inline int iop_chan_is_busy(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0; -} - -static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc, - int num_slots) -{ - /* num_slots will only ever be 1, 2, 4, or 8 */ - return (desc->idx & (num_slots - 1)) ? 0 : 1; -} - -/* to do: support large (i.e. > hw max) buffer sizes */ -static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -/* to do: support large (i.e. > hw max) buffer sizes */ -static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, - int *slots_per_op) -{ - static const char slot_count_table[] = { - 1, 1, 1, 1, /* 01 - 04 */ - 2, 2, 2, 2, /* 05 - 08 */ - 4, 4, 4, 4, /* 09 - 12 */ - 4, 4, 4, 4, /* 13 - 16 */ - 8, 8, 8, 8, /* 17 - 20 */ - 8, 8, 8, 8, /* 21 - 24 */ - 8, 8, 8, 8, /* 25 - 28 */ - 8, 8, 8, 8, /* 29 - 32 */ - }; - *slots_per_op = slot_count_table[src_cnt - 1]; - return *slots_per_op; -} - -static inline int -iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return iop_chan_memcpy_slot_count(0, slots_per_op); - case AAU_ID: - return iop3xx_aau_xor_slot_count(0, 2, slots_per_op); - default: - BUG(); - } - return 0; -} - -static inline int iop_chan_xor_slot_count(size_t len, int src_cnt, - int *slots_per_op) -{ - int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); - - if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT) - return slot_cnt; - - len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; - while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) { - len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; - slot_cnt += *slots_per_op; - } - - if (len) - slot_cnt += *slots_per_op; - - return slot_cnt; -} - -/* zero sum on iop3xx is limited to 1k at a time so it requires multiple - * descriptors - */ -static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt, - int *slots_per_op) -{ - int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); - - if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) - return slot_cnt; - - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - slot_cnt += *slots_per_op; - } - - if (len) - slot_cnt += *slots_per_op; - - return slot_cnt; -} - -static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return hw_desc.dma->dest_addr; - case AAU_ID: - return hw_desc.aau->dest_addr; - default: - BUG(); - } - return 0; -} - -static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return hw_desc.dma->byte_count; - case AAU_ID: - return hw_desc.aau->byte_count; - default: - BUG(); - } - return 0; -} - -/* translate the src_idx to a descriptor word index */ -static inline int __desc_idx(int src_idx) -{ - static const int desc_idx_table[] = { 0, 0, 0, 0, - 0, 1, 2, 3, - 5, 6, 7, 8, - 9, 10, 11, 12, - 14, 15, 16, 17, - 18, 19, 20, 21, - 23, 24, 25, 26, - 27, 28, 29, 30, - }; - - return desc_idx_table[src_idx]; -} - -static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - int src_idx) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return hw_desc.dma->src_addr; - case AAU_ID: - break; - default: - BUG(); - } - - if (src_idx < 4) - return hw_desc.aau->src[src_idx]; - else - return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr; -} - -static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc, - int src_idx, dma_addr_t addr) -{ - if (src_idx < 4) - hw_desc->src[src_idx] = addr; - else - hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr; -} - -static inline void -iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop3xx_desc_dma *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop3xx_dma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.mem_to_mem_en = 1; - u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->upper_pci_src_addr = 0; - hw_desc->crc_addr = 0; -} - -static inline void -iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */ - u_desc_ctrl.field.dest_write_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; -} - -static inline u32 -iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt, - unsigned long flags) -{ - int i, shift; - u32 edcr; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - switch (src_cnt) { - case 25 ... 32: - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - edcr = 0; - shift = 1; - for (i = 24; i < src_cnt; i++) { - edcr |= (1 << shift); - shift += 3; - } - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr; - src_cnt = 24; - /* fall through */ - case 17 ... 24: - if (!u_desc_ctrl.field.blk_ctrl) { - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - } - edcr = 0; - shift = 1; - for (i = 16; i < src_cnt; i++) { - edcr |= (1 << shift); - shift += 3; - } - hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr; - src_cnt = 16; - /* fall through */ - case 9 ... 16: - if (!u_desc_ctrl.field.blk_ctrl) - u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ - edcr = 0; - shift = 1; - for (i = 8; i < src_cnt; i++) { - edcr |= (1 << shift); - shift += 3; - } - hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr; - src_cnt = 8; - /* fall through */ - case 2 ... 8: - shift = 1; - for (i = 0; i < src_cnt; i++) { - u_desc_ctrl.value |= (1 << shift); - shift += 3; - } - - if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) - u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ - } - - u_desc_ctrl.field.dest_write_en = 1; - u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - - return u_desc_ctrl.value; -} - -static inline void -iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags); -} - -/* return the number of operations */ -static inline int -iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - int i, j; - - hw_desc = desc->hw_desc; - - for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0; - i += slots_per_op, j++) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags); - u_desc_ctrl.field.dest_write_en = 0; - u_desc_ctrl.field.zero_result_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - iter->desc_ctrl = u_desc_ctrl.value; - - /* for the subsequent descriptors preserve the store queue - * and chain them together - */ - if (i) { - prev_hw_desc = - iop_hw_desc_slot_idx(hw_desc, i - slots_per_op); - prev_hw_desc->next_desc = - (u32) (desc->async_tx.phys + (i << 5)); - } - } - - return j; -} - -static inline void -iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - switch (src_cnt) { - case 25 ... 32: - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; - /* fall through */ - case 17 ... 24: - if (!u_desc_ctrl.field.blk_ctrl) { - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - } - hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0; - /* fall through */ - case 9 ... 16: - if (!u_desc_ctrl.field.blk_ctrl) - u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ - hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0; - /* fall through */ - case 1 ... 8: - if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) - u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ - } - - u_desc_ctrl.field.dest_write_en = 0; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; -} - -static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - u32 byte_count) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - hw_desc.dma->byte_count = byte_count; - break; - case AAU_ID: - hw_desc.aau->byte_count = byte_count; - break; - default: - BUG(); - } -} - -static inline void -iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - iop_desc_init_memcpy(desc, 1); - hw_desc.dma->byte_count = 0; - hw_desc.dma->dest_addr = 0; - hw_desc.dma->src_addr = 0; - break; - case AAU_ID: - iop_desc_init_null_xor(desc, 2, 1); - hw_desc.aau->byte_count = 0; - hw_desc.aau->dest_addr = 0; - hw_desc.aau->src[0] = 0; - hw_desc.aau->src[1] = 0; - break; - default: - BUG(); - } -} - -static inline void -iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) -{ - int slots_per_op = desc->slots_per_op; - struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; - int i = 0; - - if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - hw_desc->byte_count = len; - } else { - do { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - i += slots_per_op; - } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT); - - if (len) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = len; - } - } -} - -static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - dma_addr_t addr) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - hw_desc.dma->dest_addr = addr; - break; - case AAU_ID: - hw_desc.aau->dest_addr = addr; - break; - default: - BUG(); - } -} - -static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc, - dma_addr_t addr) -{ - struct iop3xx_desc_dma *hw_desc = desc->hw_desc; - hw_desc->src_addr = addr; -} - -static inline void -iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx, - dma_addr_t addr) -{ - - struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - int i; - - for (i = 0; (slot_cnt -= slots_per_op) >= 0; - i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); - } -} - -static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc, - int src_idx, dma_addr_t addr) -{ - - struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - int i; - - for (i = 0; (slot_cnt -= slots_per_op) >= 0; - i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); - } -} - -static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, - u32 next_desc_addr) -{ - /* hw_desc->next_desc is the same location for all channels */ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - BUG_ON(hw_desc.dma->next_desc); - hw_desc.dma->next_desc = next_desc_addr; -} - -static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc) -{ - /* hw_desc->next_desc is the same location for all channels */ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - return hw_desc.dma->next_desc; -} - -static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc) -{ - /* hw_desc->next_desc is the same location for all channels */ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - hw_desc.dma->next_desc = 0; -} - -static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, - u32 val) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - hw_desc->src[0] = val; -} - -static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; - - BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); - return desc_ctrl.zero_result_err; -} - -static inline void iop_chan_append(struct iop_adma_chan *chan) -{ - u32 dma_chan_ctrl; - - dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); - dma_chan_ctrl |= 0x2; - __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); -} - -static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) -{ - return __raw_readl(DMA_CSR(chan)); -} - -static inline void iop_chan_disable(struct iop_adma_chan *chan) -{ - u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); - dma_chan_ctrl &= ~1; - __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); -} - -static inline void iop_chan_enable(struct iop_adma_chan *chan) -{ - u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); - - dma_chan_ctrl |= 1; - __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); -} - -static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - status &= (1 << 9); - __raw_writel(status, DMA_CSR(chan)); -} - -static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - status &= (1 << 8); - __raw_writel(status, DMA_CSR(chan)); -} - -static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1); - break; - case AAU_ID: - status &= (1 << 5); - break; - default: - BUG(); - } - - __raw_writel(status, DMA_CSR(chan)); -} - -static inline int -iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(5, &status); -} - -static inline int -iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return test_bit(2, &status); - default: - return 0; - } -} - -static inline int -iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return test_bit(3, &status); - default: - return 0; - } -} - -static inline int -iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return test_bit(1, &status); - default: - return 0; - } -} -#endif /* _ADMA_H */ diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/include/asm-arm/hardware/iop3xx-gpio.h deleted file mode 100644 index 0c9331f9ac2..00000000000 --- a/include/asm-arm/hardware/iop3xx-gpio.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/include/asm-arm/hardware/iop3xx-gpio.h - * - * IOP3xx GPIO wrappers - * - * Copyright (c) 2008 Arnaud Patard - * Based on IXP4XX gpio.h file - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H -#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H - -#include -#include - -#define IOP3XX_N_GPIOS 8 - -static inline int gpio_get_value(unsigned gpio) -{ - if (gpio > IOP3XX_N_GPIOS) - return __gpio_get_value(gpio); - - return gpio_line_get(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (gpio > IOP3XX_N_GPIOS) { - __gpio_set_value(gpio, value); - return; - } - gpio_line_set(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - if (gpio < IOP3XX_N_GPIOS) - return 0; - else - return __gpio_cansleep(gpio); -} - -/* - * The GPIOs are not generating any interrupt - * Note : manuals are not clear about this - */ -static inline int gpio_to_irq(int gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(int gpio) -{ - return -EINVAL; -} - -#endif - diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h deleted file mode 100644 index 18f6937f501..00000000000 --- a/include/asm-arm/hardware/iop3xx.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - * include/asm-arm/hardware/iop3xx.h - * - * Intel IOP32X and IOP33X register definitions - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOP3XX_H -#define __IOP3XX_H - -/* - * IOP3XX GPIO handling - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 -#define GPIO_LOW 0 -#define GPIO_HIGH 1 -#define IOP3XX_GPIO_LINE(x) (x) - -#ifndef __ASSEMBLY__ -extern void gpio_line_config(int line, int direction); -extern int gpio_line_get(int line); -extern void gpio_line_set(int line, int value); -extern int init_atu; -extern int iop3xx_get_init_atu(void); -#endif - - -/* - * IOP3XX processor registers - */ -#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 -#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 -#define IOP3XX_PERIPHERAL_SIZE 0x00002000 -#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ - IOP3XX_PERIPHERAL_SIZE - 1) -#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\ - IOP3XX_PERIPHERAL_SIZE - 1) -#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\ - (IOP3XX_PERIPHERAL_PHYS_BASE\ - - IOP3XX_PERIPHERAL_VIRT_BASE)) -#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) - -/* Address Translation Unit */ -#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100) -#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102) -#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104) -#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106) -#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108) -#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109) -#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c) -#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d) -#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e) -#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f) -#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110) -#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114) -#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118) -#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c) -#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120) -#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124) -#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c) -#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e) -#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130) -#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c) -#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d) -#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e) -#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f) -#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140) -#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144) -#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148) -#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c) -#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150) -#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154) -#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158) -#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c) -#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160) -#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164) -#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168) -#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c) -#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178) -#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180) -#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184) -#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188) -#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c) -#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190) -#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194) -#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198) -#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c) -#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4) -#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac) -#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc) -#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0) -#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1) -#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2) -#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4) -#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0) -#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1) -#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2) -#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) -#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) -#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15) -#define IOP3XX_PCSR_IN_Q_BUSY (1 << 14) -#define IOP3XX_ATUCR_OUT_EN (1 << 1) - -#define IOP3XX_INIT_ATU_DEFAULT 0 -#define IOP3XX_INIT_ATU_DISABLE -1 -#define IOP3XX_INIT_ATU_ENABLE 1 - -/* Messaging Unit */ -#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) -#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) -#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318) -#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c) -#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320) -#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324) -#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328) -#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c) -#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330) -#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334) -#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350) -#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354) -#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360) -#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364) -#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368) -#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c) -#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370) -#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374) -#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378) -#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c) -#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380) - -/* DMA Controller */ -#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \ - (0x400 + (chan << 6))) -#define IOP3XX_DMA_UPPER_PA(chan) (IOP3XX_DMA_PHYS_BASE(chan) + 0x27) - -/* Peripheral bus interface */ -#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680) -#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684) -#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688) -#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c) -#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690) -#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694) -#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698) -#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c) -#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0) -#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4) -#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8) -#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac) -#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0) -#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4) -#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0) -#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0) -#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4) - -/* Peripheral performance monitoring unit */ -#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700) -#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704) -#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708) -#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710) -/* PERCR0 DOESN'T EXIST - index from 1! */ -#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710) - -/* General Purpose I/O */ -#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000) -#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004) -#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008) - -/* Timers */ -#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) -#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) -#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008) -#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c) -#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010) -#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014) -#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018) -#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c) -#define IOP_TMR_EN 0x02 -#define IOP_TMR_RELOAD 0x04 -#define IOP_TMR_PRIVILEGED 0x08 -#define IOP_TMR_RATIO_1_1 0x00 - -/* Watchdog timer definitions */ -#define IOP_WDTCR_EN_ARM 0x1e1e1e1e -#define IOP_WDTCR_EN 0xe1e1e1e1 -/* iop3xx does not support stopping the watchdog, so we just re-arm */ -#define IOP_WDTCR_DIS_ARM (IOP_WDTCR_EN_ARM) -#define IOP_WDTCR_DIS (IOP_WDTCR_EN) - -/* Application accelerator unit */ -#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800) -#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7) - -/* I2C bus interface unit */ -#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) -#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) -#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688) -#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c) -#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694) -#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0) -#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4) -#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8) -#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac) -#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4) - - -/* - * IOP3XX I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 - -#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP3XX_PCI_LOWER_IO_PA 0x90000000 -#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 -#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 -#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ - IOP3XX_PCI_LOWER_IO_PA) +\ - IOP3XX_PCI_LOWER_IO_VA) - - -#ifndef __ASSEMBLY__ -void iop3xx_map_io(void); -void iop_init_cp6_handler(void); -void iop_init_time(unsigned long tickrate); -unsigned long iop_gettimeoffset(void); - -static inline void write_tmr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val)); -} - -static inline void write_tmr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val)); -} - -static inline u32 read_tcr0(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val)); - return val; -} - -static inline u32 read_tcr1(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val)); - return val; -} - -static inline void write_trr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val)); -} - -static inline void write_trr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val)); -} - -static inline void write_tisr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val)); -} - -static inline u32 read_wdtcr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val)); - return val; -} -static inline void write_wdtcr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val)); -} - -extern unsigned long get_iop_tick_rate(void); - -/* only iop13xx has these registers, we define these to present a - * common register interface for the iop_wdt driver. - */ -#define IOP_RCSR_WDT (0) -static inline u32 read_rcsr(void) -{ - return 0; -} -static inline void write_wdtsr(u32 val) -{ - do { } while (0); -} - -extern struct platform_device iop3xx_dma_0_channel; -extern struct platform_device iop3xx_dma_1_channel; -extern struct platform_device iop3xx_aau_channel; -extern struct platform_device iop3xx_i2c0_device; -extern struct platform_device iop3xx_i2c1_device; - -#endif - - -#endif diff --git a/include/asm-arm/hardware/iop_adma.h b/include/asm-arm/hardware/iop_adma.h deleted file mode 100644 index cb7e3611bcb..00000000000 --- a/include/asm-arm/hardware/iop_adma.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -#ifndef IOP_ADMA_H -#define IOP_ADMA_H -#include -#include -#include - -#define IOP_ADMA_SLOT_SIZE 32 -#define IOP_ADMA_THRESHOLD 4 - -/** - * struct iop_adma_device - internal representation of an ADMA device - * @pdev: Platform device - * @id: HW ADMA Device selector - * @dma_desc_pool: base of DMA descriptor region (DMA address) - * @dma_desc_pool_virt: base of DMA descriptor region (CPU address) - * @common: embedded struct dma_device - */ -struct iop_adma_device { - struct platform_device *pdev; - int id; - dma_addr_t dma_desc_pool; - void *dma_desc_pool_virt; - struct dma_device common; -}; - -/** - * struct iop_adma_chan - internal representation of an ADMA device - * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation - * @lock: serializes enqueue/dequeue operations to the slot pool - * @mmr_base: memory mapped register base - * @chain: device chain view of the descriptors - * @device: parent device - * @common: common dmaengine channel object members - * @last_used: place holder for allocation to continue from where it left off - * @all_slots: complete domain of slots usable by the channel - * @slots_allocated: records the actual size of the descriptor slot pool - * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs - */ -struct iop_adma_chan { - int pending; - dma_cookie_t completed_cookie; - spinlock_t lock; /* protects the descriptor slot pool */ - void __iomem *mmr_base; - struct list_head chain; - struct iop_adma_device *device; - struct dma_chan common; - struct iop_adma_desc_slot *last_used; - struct list_head all_slots; - int slots_allocated; - struct tasklet_struct irq_tasklet; -}; - -/** - * struct iop_adma_desc_slot - IOP-ADMA software descriptor - * @slot_node: node on the iop_adma_chan.all_slots list - * @chain_node: node on the op_adma_chan.chain list - * @hw_desc: virtual address of the hardware descriptor chain - * @phys: hardware address of the hardware descriptor chain - * @group_head: first operation in a transaction - * @slot_cnt: total slots used in an transaction (group of operations) - * @slots_per_op: number of slots per operation - * @idx: pool index - * @unmap_src_cnt: number of xor sources - * @unmap_len: transaction bytecount - * @async_tx: support for the async_tx api - * @group_list: list of slots that make up a multi-descriptor transaction - * for example transfer lengths larger than the supported hw max - * @xor_check_result: result of zero sum - * @crc32_result: result crc calculation - */ -struct iop_adma_desc_slot { - struct list_head slot_node; - struct list_head chain_node; - void *hw_desc; - struct iop_adma_desc_slot *group_head; - u16 slot_cnt; - u16 slots_per_op; - u16 idx; - u16 unmap_src_cnt; - size_t unmap_len; - struct dma_async_tx_descriptor async_tx; - union { - u32 *xor_check_result; - u32 *crc32_result; - }; -}; - -struct iop_adma_platform_data { - int hw_id; - dma_cap_mask_t cap_mask; - size_t pool_size; -}; - -#define to_iop_sw_desc(addr_hw_desc) \ - container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc) -#define iop_hw_desc_slot_idx(hw_desc, idx) \ - ( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) ) -#endif diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h deleted file mode 100644 index 74b5fff7f57..00000000000 --- a/include/asm-arm/hardware/it8152.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * linux/include/arm/hardware/it8152.h - * - * Copyright Compulab Ltd., 2006,2007 - * Mike Rapoport - * - * ITE 8152 companion chip register definitions - */ - -#ifndef __ASM_HARDWARE_IT8152_H -#define __ASM_HARDWARE_IT8152_H -extern unsigned long it8152_base_address; - -#define IT8152_IO_BASE (it8152_base_address + 0x03e00000) -#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) - -#define __REG_IT8152(x) (it8152_base_address + (x)) - -#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800) -#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804) - -#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300) -#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304) -#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308) -#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C) -#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310) -#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314) -#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320) -#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324) -#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328) -#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C) -#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330) -#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334) -#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340) -#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344) -#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348) -#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C) -#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350) -#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354) -#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC) - -#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500) - -/* - Interrupt controller per register summary: - --------------------------------------- - LCDNIRR: - IT8152_LD_IRQ(8) PCICLK stop - IT8152_LD_IRQ(7) MCLK ready - IT8152_LD_IRQ(6) s/w - IT8152_LD_IRQ(5) UART - IT8152_LD_IRQ(4) GPIO - IT8152_LD_IRQ(3) TIMER 4 - IT8152_LD_IRQ(2) TIMER 3 - IT8152_LD_IRQ(1) TIMER 2 - IT8152_LD_IRQ(0) TIMER 1 - - LPCNIRR: - IT8152_LP_IRQ(x) serial IRQ x - - PCIDNIRR: - IT8152_PD_IRQ(14) PCISERR - IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR) - IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR) - IT8152_PD_IRQ(11) PCI INTD - IT8152_PD_IRQ(10) PCI INTC - IT8152_PD_IRQ(9) PCI INTB - IT8152_PD_IRQ(8) PCI INTA - IT8152_PD_IRQ(7) serial INTD - IT8152_PD_IRQ(6) serial INTC - IT8152_PD_IRQ(5) serial INTB - IT8152_PD_IRQ(4) serial INTA - IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR) - IT8152_PD_IRQ(2) chaining DMA (CDMAR) - IT8152_PD_IRQ(1) USB (USBR) - IT8152_PD_IRQ(0) Audio controller (ACR) - */ -/* frequently used interrupts */ -#define IT8152_PCISERR IT8152_PD_IRQ(14) -#define IT8152_H2PTADR IT8152_PD_IRQ(13) -#define IT8152_H2PMAR IT8152_PD_IRQ(12) -#define IT8152_PCI_INTD IT8152_PD_IRQ(11) -#define IT8152_PCI_INTC IT8152_PD_IRQ(10) -#define IT8152_PCI_INTB IT8152_PD_IRQ(9) -#define IT8152_PCI_INTA IT8152_PD_IRQ(8) -#define IT8152_CDMA_INT IT8152_PD_IRQ(2) -#define IT8152_USB_INT IT8152_PD_IRQ(1) -#define IT8152_AUDIO_INT IT8152_PD_IRQ(0) - -struct pci_dev; -struct pci_sys_data; - -extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc); -extern void it8152_init_irq(void); -extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); -extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); -extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys); - -#endif /* __ASM_HARDWARE_IT8152_H */ diff --git a/include/asm-arm/hardware/linkup-l1110.h b/include/asm-arm/hardware/linkup-l1110.h deleted file mode 100644 index 7ec91168a57..00000000000 --- a/include/asm-arm/hardware/linkup-l1110.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -* -* Definitions for H3600 Handheld Computer -* -* Copyright 2001 Compaq Computer Corporation. -* -* Use consistent with the GNU GPL is permitted, -* provided that this copyright notice is -* preserved in its entirety in all copies and derived works. -* -* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -* FITNESS FOR ANY PARTICULAR PURPOSE. -* -* Author: Jamey Hicks. -* -*/ - -/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ - -/* PC Card Status Register */ -#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ -#define LINKUP_PRS_S2 (1 << 1) -#define LINKUP_PRS_S3 (1 << 2) -#define LINKUP_PRS_S4 (1 << 3) -#define LINKUP_PRS_BVD1 (1 << 4) -#define LINKUP_PRS_BVD2 (1 << 5) -#define LINKUP_PRS_VS1 (1 << 6) -#define LINKUP_PRS_VS2 (1 << 7) -#define LINKUP_PRS_RDY (1 << 8) -#define LINKUP_PRS_CD1 (1 << 9) -#define LINKUP_PRS_CD2 (1 << 10) - -/* PC Card Command Register */ -#define LINKUP_PRC_S1 (1 << 0) -#define LINKUP_PRC_S2 (1 << 1) -#define LINKUP_PRC_S3 (1 << 2) -#define LINKUP_PRC_S4 (1 << 3) -#define LINKUP_PRC_RESET (1 << 4) -#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ -#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ -#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ -#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ -#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ - -struct linkup_l1110 { - volatile short prc; -}; diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h deleted file mode 100644 index fb0645de6f3..00000000000 --- a/include/asm-arm/hardware/locomo.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - * linux/include/asm-arm/hardware/locomo.h - * - * This file contains the definitions for the LoCoMo G/A Chip - * - * (C) Copyright 2004 John Lenz - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Based on sa1111.h - */ -#ifndef _ASM_ARCH_LOCOMO -#define _ASM_ARCH_LOCOMO - -#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); }) -#define locomo_readl(addr) (*(volatile u16 *)(addr)) - -/* LOCOMO version */ -#define LOCOMO_VER 0x00 - -/* Pin status */ -#define LOCOMO_ST 0x04 - -/* Pin status */ -#define LOCOMO_C32K 0x08 - -/* Interrupt controller */ -#define LOCOMO_ICR 0x0C - -/* MCS decoder for boot selecting */ -#define LOCOMO_MCSX0 0x10 -#define LOCOMO_MCSX1 0x14 -#define LOCOMO_MCSX2 0x18 -#define LOCOMO_MCSX3 0x1c - -/* Touch panel controller */ -#define LOCOMO_ASD 0x20 /* AD start delay */ -#define LOCOMO_HSD 0x28 /* HSYS delay */ -#define LOCOMO_HSC 0x2c /* HSYS period */ -#define LOCOMO_TADC 0x30 /* tablet ADC clock */ - - -/* Long time timer */ -#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ -#define LOCOMO_LTINT 0xdc /* LTC interrupt */ - -/* DAC control signal for LCD (COMADJ ) */ -#define LOCOMO_DAC 0xe0 -/* DAC control */ -#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ -#define LOCOMO_DAC_TEST 0x04 /* Test bit */ -#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ -#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ - -/* SPI interface */ -#define LOCOMO_SPI 0x60 -#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ -#define LOCOMO_SPICT 0x04 /* SPI mode control */ -#define LOCOMO_SPIST 0x08 /* SPI status */ -#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ -#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */ -#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ -#define LOCOMO_SPI_RFR (1) /* read buffer bit */ - -#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ -#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ -#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ -#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ -#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ -#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ -#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ -#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ - -/* GPIO */ -#define LOCOMO_GPD 0x90 /* GPIO direction */ -#define LOCOMO_GPE 0x94 /* GPIO input enable */ -#define LOCOMO_GPL 0x98 /* GPIO level */ -#define LOCOMO_GPO 0x9c /* GPIO out data setting */ -#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ -#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ -#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ -#define LOCOMO_GWE 0xac /* GPIO status write enable */ -#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */ -#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */ -#define LOCOMO_GPIO(Nb) (0x01 << (Nb)) -#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0) -#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1) -#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2) -#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3) -#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4) -#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5) -#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6) -#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7) -#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8) -#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9) -#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10) -#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11) -#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12) -#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13) -#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14) -#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15) - -/* Start the definitions of the devices. Each device has an initial - * base address and a series of offsets from that base address. */ - -/* Keyboard controller */ -#define LOCOMO_KEYBOARD 0x40 -#define LOCOMO_KIB 0x00 /* KIB level */ -#define LOCOMO_KSC 0x04 /* KSTRB control */ -#define LOCOMO_KCMD 0x08 /* KSTRB command */ -#define LOCOMO_KIC 0x0c /* Key interrupt */ - -/* Front light adjustment controller */ -#define LOCOMO_FRONTLIGHT 0xc8 -#define LOCOMO_ALS 0x00 /* Adjust light cycle */ -#define LOCOMO_ALD 0x04 /* Adjust light duty */ - -#define LOCOMO_ALC_EN 0x8000 - -/* Backlight controller: TFT signal */ -#define LOCOMO_BACKLIGHT 0x38 -#define LOCOMO_TC 0x00 /* TFT control signal */ -#define LOCOMO_CPSD 0x04 /* CPS delay */ - -/* Audio controller */ -#define LOCOMO_AUDIO 0x54 -#define LOCOMO_ACC 0x00 /* Audio clock */ -#define LOCOMO_PAIF 0xD0 /* PCM audio interface */ -/* Audio clock */ -#define LOCOMO_ACC_XON 0x80 -#define LOCOMO_ACC_XEN 0x40 -#define LOCOMO_ACC_XSEL0 0x00 -#define LOCOMO_ACC_XSEL1 0x20 -#define LOCOMO_ACC_MCLKEN 0x10 -#define LOCOMO_ACC_64FSEN 0x08 -#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ -#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ -#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ -#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ -#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ -#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ -/* PCM audio interface */ -#define LOCOMO_PAIF_SCINV 0x20 -#define LOCOMO_PAIF_SCEN 0x10 -#define LOCOMO_PAIF_LRCRST 0x08 -#define LOCOMO_PAIF_LRCEVE 0x04 -#define LOCOMO_PAIF_LRCINV 0x02 -#define LOCOMO_PAIF_LRCEN 0x01 - -/* LED controller */ -#define LOCOMO_LED 0xe8 -#define LOCOMO_LPT0 0x00 -#define LOCOMO_LPT1 0x04 -/* LED control */ -#define LOCOMO_LPT_TOFH 0x80 -#define LOCOMO_LPT_TOFL 0x08 -#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) -#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) - -extern struct bus_type locomo_bus_type; - -#define LOCOMO_DEVID_KEYBOARD 0 -#define LOCOMO_DEVID_FRONTLIGHT 1 -#define LOCOMO_DEVID_BACKLIGHT 2 -#define LOCOMO_DEVID_AUDIO 3 -#define LOCOMO_DEVID_LED 4 -#define LOCOMO_DEVID_UART 5 -#define LOCOMO_DEVID_SPI 6 - -struct locomo_dev { - struct device dev; - unsigned int devid; - unsigned int irq[1]; - - void *mapbase; - unsigned long length; - - u64 dma_mask; -}; - -#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev) - -#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev) -#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) - -struct locomo_driver { - struct device_driver drv; - unsigned int devid; - int (*probe)(struct locomo_dev *); - int (*remove)(struct locomo_dev *); - int (*suspend)(struct locomo_dev *, pm_message_t); - int (*resume)(struct locomo_dev *); -}; - -#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) - -#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name) - -void locomo_lcd_power(struct locomo_dev *, int, unsigned int); - -int locomo_driver_register(struct locomo_driver *); -void locomo_driver_unregister(struct locomo_driver *); - -/* GPIO control functions */ -void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); -int locomo_gpio_read_level(struct device *dev, unsigned int bits); -int locomo_gpio_read_output(struct device *dev, unsigned int bits); -void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); - -/* M62332 control function */ -void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); - -/* Frontlight control */ -void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); - -#endif diff --git a/include/asm-arm/hardware/memc.h b/include/asm-arm/hardware/memc.h deleted file mode 100644 index 8aef5aa0e01..00000000000 --- a/include/asm-arm/hardware/memc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/hardware/memc.h - * - * Copyright (C) Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VDMA_ALIGNMENT PAGE_SIZE -#define VDMA_XFERSIZE 16 -#define VDMA_INIT 0 -#define VDMA_START 1 -#define VDMA_END 2 - -#ifndef __ASSEMBLY__ -extern void memc_write(unsigned int reg, unsigned long val); - -#define video_set_dma(start,end,offset) \ -do { \ - memc_write (VDMA_START, (start >> 2)); \ - memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \ - memc_write (VDMA_INIT, (offset >> 2)); \ -} while (0) - -#endif diff --git a/include/asm-arm/hardware/pci_v3.h b/include/asm-arm/hardware/pci_v3.h deleted file mode 100644 index 4d497bdb9a9..00000000000 --- a/include/asm-arm/hardware/pci_v3.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/include/asm-arm/hardware/pci_v3.h - * - * Internal header file PCI V3 chip - * - * Copyright (C) ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef ASM_ARM_HARDWARE_PCI_V3_H -#define ASM_ARM_HARDWARE_PCI_V3_H - -/* ------------------------------------------------------------------------------- - * V3 Local Bus to PCI Bridge definitions - * ------------------------------------------------------------------------------- - * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 - * All V3 register names are prefaced by V3_ to avoid clashing with any other - * PCI definitions. Their names match the user's manual. - * - * I'm assuming that I20 is disabled. - * - */ -#define V3_PCI_VENDOR 0x00000000 -#define V3_PCI_DEVICE 0x00000002 -#define V3_PCI_CMD 0x00000004 -#define V3_PCI_STAT 0x00000006 -#define V3_PCI_CC_REV 0x00000008 -#define V3_PCI_HDR_CFG 0x0000000C -#define V3_PCI_IO_BASE 0x00000010 -#define V3_PCI_BASE0 0x00000014 -#define V3_PCI_BASE1 0x00000018 -#define V3_PCI_SUB_VENDOR 0x0000002C -#define V3_PCI_SUB_ID 0x0000002E -#define V3_PCI_ROM 0x00000030 -#define V3_PCI_BPARAM 0x0000003C -#define V3_PCI_MAP0 0x00000040 -#define V3_PCI_MAP1 0x00000044 -#define V3_PCI_INT_STAT 0x00000048 -#define V3_PCI_INT_CFG 0x0000004C -#define V3_LB_BASE0 0x00000054 -#define V3_LB_BASE1 0x00000058 -#define V3_LB_MAP0 0x0000005E -#define V3_LB_MAP1 0x00000062 -#define V3_LB_BASE2 0x00000064 -#define V3_LB_MAP2 0x00000066 -#define V3_LB_SIZE 0x00000068 -#define V3_LB_IO_BASE 0x0000006E -#define V3_FIFO_CFG 0x00000070 -#define V3_FIFO_PRIORITY 0x00000072 -#define V3_FIFO_STAT 0x00000074 -#define V3_LB_ISTAT 0x00000076 -#define V3_LB_IMASK 0x00000077 -#define V3_SYSTEM 0x00000078 -#define V3_LB_CFG 0x0000007A -#define V3_PCI_CFG 0x0000007C -#define V3_DMA_PCI_ADR0 0x00000080 -#define V3_DMA_PCI_ADR1 0x00000090 -#define V3_DMA_LOCAL_ADR0 0x00000084 -#define V3_DMA_LOCAL_ADR1 0x00000094 -#define V3_DMA_LENGTH0 0x00000088 -#define V3_DMA_LENGTH1 0x00000098 -#define V3_DMA_CSR0 0x0000008B -#define V3_DMA_CSR1 0x0000009B -#define V3_DMA_CTLB_ADR0 0x0000008C -#define V3_DMA_CTLB_ADR1 0x0000009C -#define V3_DMA_DELAY 0x000000E0 -#define V3_MAIL_DATA 0x000000C0 -#define V3_PCI_MAIL_IEWR 0x000000D0 -#define V3_PCI_MAIL_IERD 0x000000D2 -#define V3_LB_MAIL_IEWR 0x000000D4 -#define V3_LB_MAIL_IERD 0x000000D6 -#define V3_MAIL_WR_STAT 0x000000D8 -#define V3_MAIL_RD_STAT 0x000000DA -#define V3_QBA_MAP 0x000000DC - -/* PCI COMMAND REGISTER bits - */ -#define V3_COMMAND_M_FBB_EN (1 << 9) -#define V3_COMMAND_M_SERR_EN (1 << 8) -#define V3_COMMAND_M_PAR_EN (1 << 6) -#define V3_COMMAND_M_MASTER_EN (1 << 2) -#define V3_COMMAND_M_MEM_EN (1 << 1) -#define V3_COMMAND_M_IO_EN (1 << 0) - -/* SYSTEM REGISTER bits - */ -#define V3_SYSTEM_M_RST_OUT (1 << 15) -#define V3_SYSTEM_M_LOCK (1 << 14) - -/* PCI_CFG bits - */ -#define V3_PCI_CFG_M_I2O_EN (1 << 15) -#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) -#define V3_PCI_CFG_M_IO_DIS (1 << 13) -#define V3_PCI_CFG_M_EN3V (1 << 12) -#define V3_PCI_CFG_M_RETRY_EN (1 << 10) -#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) -#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) - -/* PCI_BASE register bits (PCI -> Local Bus) - */ -#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 -#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 -#define V3_PCI_BASE_M_PREFETCH (1 << 3) -#define V3_PCI_BASE_M_TYPE (3 << 1) -#define V3_PCI_BASE_M_IO (1 << 0) - -/* PCI MAP register bits (PCI -> Local bus) - */ -#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 -#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) -#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) -#define V3_PCI_MAP_M_SWAP (3 << 8) -#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 -#define V3_PCI_MAP_M_REG_EN (1 << 1) -#define V3_PCI_MAP_M_ENABLE (1 << 0) - -/* - * LB_BASE0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_BASE_ADR_BASE 0xfff00000 -#define V3_LB_BASE_SWAP (3 << 8) -#define V3_LB_BASE_ADR_SIZE (15 << 4) -#define V3_LB_BASE_PREFETCH (1 << 3) -#define V3_LB_BASE_ENABLE (1 << 0) - -#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) -#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) -#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) -#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) -#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) -#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) -#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) -#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) -#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) -#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) -#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) -#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) - -#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) - -/* - * LB_MAP0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_MAP_MAP_ADR 0xfff0 -#define V3_LB_MAP_TYPE (7 << 1) -#define V3_LB_MAP_AD_LOW_EN (1 << 0) - -#define V3_LB_MAP_TYPE_IACK (0 << 1) -#define V3_LB_MAP_TYPE_IO (1 << 1) -#define V3_LB_MAP_TYPE_MEM (3 << 1) -#define V3_LB_MAP_TYPE_CONFIG (5 << 1) -#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) - -#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) - -/* - * LB_BASE2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_BASE2_ADR_BASE 0xff00 -#define V3_LB_BASE2_SWAP (3 << 6) -#define V3_LB_BASE2_ENABLE (1 << 0) - -#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) - -/* - * LB_MAP2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_MAP2_MAP_ADR 0xff00 - -#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) - -#endif diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h deleted file mode 100644 index 61b1d05c7df..00000000000 --- a/include/asm-arm/hardware/sa1111.h +++ /dev/null @@ -1,581 +0,0 @@ -/* - * linux/include/asm-arm/hardware/sa1111.h - * - * Copyright (C) 2000 John G Dorsey - * - * This file contains definitions for the SA-1111 Companion Chip. - * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.) - * - * Macro that calculates real address for registers in the SA-1111 - */ - -#ifndef _ASM_ARCH_SA1111 -#define _ASM_ARCH_SA1111 - -#include - -/* - * The SA1111 is always located at virtual 0xf4000000, and is always - * "native" endian. - */ - -#define SA1111_VBASE 0xf4000000 - -/* Don't use these! */ -#define SA1111_p2v( x ) ((x) - SA1111_BASE + SA1111_VBASE) -#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE) - -#ifndef __ASSEMBLY__ -#define _SA1111(x) ((x) + sa1111->resource.start) -#endif - -#define sa1111_writel(val,addr) __raw_writel(val, addr) -#define sa1111_readl(addr) __raw_readl(addr) - -/* - * 26 bits of the SA-1110 address bus are available to the SA-1111. - * Use these when feeding target addresses to the DMA engines. - */ - -#define SA1111_ADDR_WIDTH (26) -#define SA1111_ADDR_MASK ((1<dev) -#define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) - -struct sa1111_driver { - struct device_driver drv; - unsigned int devid; - int (*probe)(struct sa1111_dev *); - int (*remove)(struct sa1111_dev *); - int (*suspend)(struct sa1111_dev *, pm_message_t); - int (*resume)(struct sa1111_dev *); -}; - -#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) - -#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) - -/* - * These frob the SKPCR register. - */ -void sa1111_enable_device(struct sa1111_dev *); -void sa1111_disable_device(struct sa1111_dev *); - -unsigned int sa1111_pll_clock(struct sa1111_dev *); - -#define SA1111_AUDIO_ACLINK 0 -#define SA1111_AUDIO_I2S 1 - -void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode); -int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate); -int sa1111_get_audio_rate(struct sa1111_dev *sadev); - -int sa1111_check_dma_bug(dma_addr_t addr); - -int sa1111_driver_register(struct sa1111_driver *); -void sa1111_driver_unregister(struct sa1111_driver *); - -void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir); -void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); -void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); - -#endif /* _ASM_ARCH_SA1111 */ diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h deleted file mode 100644 index dfb8330599f..00000000000 --- a/include/asm-arm/hardware/scoop.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Definitions for the SCOOP interface found on various Sharp PDAs - * - * Copyright (c) 2004 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define SCOOP_MCR 0x00 -#define SCOOP_CDR 0x04 -#define SCOOP_CSR 0x08 -#define SCOOP_CPR 0x0C -#define SCOOP_CCR 0x10 -#define SCOOP_IRR 0x14 -#define SCOOP_IRM 0x14 -#define SCOOP_IMR 0x18 -#define SCOOP_ISR 0x1C -#define SCOOP_GPCR 0x20 -#define SCOOP_GPWR 0x24 -#define SCOOP_GPRR 0x28 - -#define SCOOP_GPCR_PA22 ( 1 << 12 ) -#define SCOOP_GPCR_PA21 ( 1 << 11 ) -#define SCOOP_GPCR_PA20 ( 1 << 10 ) -#define SCOOP_GPCR_PA19 ( 1 << 9 ) -#define SCOOP_GPCR_PA18 ( 1 << 8 ) -#define SCOOP_GPCR_PA17 ( 1 << 7 ) -#define SCOOP_GPCR_PA16 ( 1 << 6 ) -#define SCOOP_GPCR_PA15 ( 1 << 5 ) -#define SCOOP_GPCR_PA14 ( 1 << 4 ) -#define SCOOP_GPCR_PA13 ( 1 << 3 ) -#define SCOOP_GPCR_PA12 ( 1 << 2 ) -#define SCOOP_GPCR_PA11 ( 1 << 1 ) - -struct scoop_config { - unsigned short io_out; - unsigned short io_dir; - unsigned short suspend_clr; - unsigned short suspend_set; - int gpio_base; -}; - -/* Structure for linking scoop devices to PCMCIA sockets */ -struct scoop_pcmcia_dev { - struct device *dev; /* Pointer to this socket's scoop device */ - int irq; /* irq for socket */ - int cd_irq; - const char *cd_irq_str; - unsigned char keep_vs; - unsigned char keep_rd; -}; - -struct scoop_pcmcia_config { - struct scoop_pcmcia_dev *devs; - int num_devs; - void (*pcmcia_init)(void); - void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr); -}; - -extern struct scoop_pcmcia_config *platform_scoop_config; - -void reset_scoop(struct device *dev); -unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short read_scoop_reg(struct device *dev, unsigned short reg); -void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h deleted file mode 100644 index 2d00db22b98..00000000000 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * SharpSL Battery/PM Driver - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -struct sharpsl_charger_machinfo { - void (*init)(void); - void (*exit)(void); - int gpio_acin; - int gpio_batfull; - int batfull_irq; - int gpio_batlock; - int gpio_fatal; - void (*discharge)(int); - void (*discharge1)(int); - void (*charge)(int); - void (*measure_temp)(int); - void (*presuspend)(void); - void (*postsuspend)(void); - void (*earlyresume)(void); - unsigned long (*read_devdata)(int); -#define SHARPSL_BATT_VOLT 1 -#define SHARPSL_BATT_TEMP 2 -#define SHARPSL_ACIN_VOLT 3 -#define SHARPSL_STATUS_ACIN 4 -#define SHARPSL_STATUS_LOCK 5 -#define SHARPSL_STATUS_CHRGFULL 6 -#define SHARPSL_STATUS_FATAL 7 - unsigned long (*charger_wakeup)(void); - int (*should_wakeup)(unsigned int resume_on_alarm); - void (*backlight_limit)(int); - int (*backlight_get_status) (void); - int charge_on_volt; - int charge_on_temp; - int charge_acin_high; - int charge_acin_low; - int fatal_acin_volt; - int fatal_noacin_volt; - int bat_levels; - struct battery_thresh *bat_levels_noac; - struct battery_thresh *bat_levels_acin; - struct battery_thresh *bat_levels_noac_bl; - struct battery_thresh *bat_levels_acin_bl; - int status_high_acin; - int status_low_acin; - int status_high_noac; - int status_low_noac; -}; - -struct battery_thresh { - int voltage; - int percentage; -}; - -struct battery_stat { - int ac_status; /* APM AC Present/Not Present */ - int mainbat_status; /* APM Main Battery Status */ - int mainbat_percent; /* Main Battery Percentage Charge */ - int mainbat_voltage; /* Main Battery Voltage */ -}; - -struct sharpsl_pm_status { - struct device *dev; - struct timer_list ac_timer; - struct timer_list chrg_full_timer; - - int charge_mode; -#define CHRG_ERROR (-1) -#define CHRG_OFF (0) -#define CHRG_ON (1) -#define CHRG_DONE (2) - - unsigned int flags; -#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ -#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ -#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ -#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ -#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ - - int full_count; - unsigned long charge_start_time; - struct sharpsl_charger_machinfo *machinfo; - struct battery_stat battstat; -}; - -extern struct sharpsl_pm_status sharpsl_pm; - - -#define SHARPSL_LED_ERROR 2 -#define SHARPSL_LED_ON 1 -#define SHARPSL_LED_OFF 0 - -void sharpsl_battery_kick(void); -void sharpsl_pm_led(int val); -irqreturn_t sharpsl_ac_isr(int irq, void *dev_id); -irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id); -irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id); - diff --git a/include/asm-arm/hardware/ssp.h b/include/asm-arm/hardware/ssp.h deleted file mode 100644 index 3b42e181997..00000000000 --- a/include/asm-arm/hardware/ssp.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef SSP_H -#define SSP_H - -struct ssp_state { - unsigned int cr0; - unsigned int cr1; -}; - -int ssp_write_word(u16 data); -int ssp_read_word(u16 *data); -int ssp_flush(void); -void ssp_enable(void); -void ssp_disable(void); -void ssp_save_state(struct ssp_state *ssp); -void ssp_restore_state(struct ssp_state *ssp); -int ssp_init(void); -void ssp_exit(void); - -#endif diff --git a/include/asm-arm/hardware/uengine.h b/include/asm-arm/hardware/uengine.h deleted file mode 100644 index b442d65c659..00000000000 --- a/include/asm-arm/hardware/uengine.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#ifndef __IXP2000_UENGINE_H -#define __IXP2000_UENGINE_H - -extern u32 ixp2000_uengine_mask; - -struct ixp2000_uengine_code -{ - u32 cpu_model_bitmask; - u8 cpu_min_revision; - u8 cpu_max_revision; - - u32 uengine_parameters; - - struct ixp2000_reg_value { - int reg; - u32 value; - } *initial_reg_values; - - int num_insns; - u8 *insns; -}; - -u32 ixp2000_uengine_csr_read(int uengine, int offset); -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); -void ixp2000_uengine_reset(u32 uengine_mask); -void ixp2000_uengine_set_mode(int uengine, u32 mode); -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); -void ixp2000_uengine_init_context(int uengine, int context, int pc); -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); - -#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 -#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 -#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 -#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 -#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 -#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 -#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 -#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 -#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 -#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 - - -#endif diff --git a/include/asm-arm/hardware/vic.h b/include/asm-arm/hardware/vic.h deleted file mode 100644 index ed9ca3736a0..00000000000 --- a/include/asm-arm/hardware/vic.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/hardware/vic.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_HARDWARE_VIC_H -#define __ASM_ARM_HARDWARE_VIC_H - -#define VIC_IRQ_STATUS 0x00 -#define VIC_FIQ_STATUS 0x04 -#define VIC_RAW_STATUS 0x08 -#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ -#define VIC_INT_ENABLE 0x10 /* 1 = enable, 0 = disable */ -#define VIC_INT_ENABLE_CLEAR 0x14 -#define VIC_INT_SOFT 0x18 -#define VIC_INT_SOFT_CLEAR 0x1c -#define VIC_PROTECT 0x20 -#define VIC_VECT_ADDR 0x30 -#define VIC_DEF_VECT_ADDR 0x34 - -#define VIC_VECT_ADDR0 0x100 /* 0 to 15 */ -#define VIC_VECT_CNTL0 0x200 /* 0 to 15 */ -#define VIC_ITCR 0x300 /* VIC test control register */ - -#define VIC_VECT_CNTL_ENABLE (1 << 5) - -#ifndef __ASSEMBLY__ -void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); -#endif - -#endif diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h deleted file mode 100644 index f1a08a50060..00000000000 --- a/include/asm-arm/hw_irq.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Nothing to see here yet - */ -#ifndef _ARCH_ARM_HW_IRQ_H -#define _ARCH_ARM_HW_IRQ_H - -#include - -#endif diff --git a/include/asm-arm/hwcap.h b/include/asm-arm/hwcap.h deleted file mode 100644 index 81f4c899a55..00000000000 --- a/include/asm-arm/hwcap.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASMARM_HWCAP_H -#define __ASMARM_HWCAP_H - -/* - * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP - */ -#define HWCAP_SWP 1 -#define HWCAP_HALF 2 -#define HWCAP_THUMB 4 -#define HWCAP_26BIT 8 /* Play it safe */ -#define HWCAP_FAST_MULT 16 -#define HWCAP_FPA 32 -#define HWCAP_VFP 64 -#define HWCAP_EDSP 128 -#define HWCAP_JAVA 256 -#define HWCAP_IWMMXT 512 -#define HWCAP_CRUNCH 1024 -#define HWCAP_THUMBEE 2048 - -#if defined(__KERNEL__) && !defined(__ASSEMBLY__) -/* - * This yields a mask that user programs can use to figure out what - * instruction set this cpu supports. - */ -#define ELF_HWCAP (elf_hwcap) -extern unsigned int elf_hwcap; -#endif - -#endif diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h deleted file mode 100644 index a48019f99d0..00000000000 --- a/include/asm-arm/ide.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/ide.h - * - * Copyright (C) 1994-1996 Linus Torvalds & authors - */ - -/* - * This file contains the ARM architecture specific IDE code. - */ - -#ifndef __ASMARM_IDE_H -#define __ASMARM_IDE_H - -#ifdef __KERNEL__ - -#define __ide_mm_insw(port,addr,len) readsw(port,addr,len) -#define __ide_mm_insl(port,addr,len) readsl(port,addr,len) -#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) -#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len) - -#endif /* __KERNEL__ */ - -#endif /* __ASMARM_IDE_H */ diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h deleted file mode 100644 index eebe56e74d6..00000000000 --- a/include/asm-arm/io.h +++ /dev/null @@ -1,287 +0,0 @@ -/* - * linux/include/asm-arm/io.h - * - * Copyright (C) 1996-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both - * constant addresses and variable addresses. - * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture - * specific IO header files. - * 27-Mar-1999 PJB Second parameter of memcpy_toio is const.. - * 04-Apr-1999 PJB Added check_signature. - * 12-Dec-1999 RMK More cleanups - * 18-Jun-2000 RMK Removed virt_to_* and friends definitions - * 05-Oct-2004 BJD Moved memory string functions to use void __iomem - */ -#ifndef __ASM_ARM_IO_H -#define __ASM_ARM_IO_H - -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * ISA I/O bus memory addresses are 1:1 with the physical address. - */ -#define isa_virt_to_bus virt_to_phys -#define isa_page_to_bus page_to_phys -#define isa_bus_to_virt phys_to_virt - -/* - * Generic IO read/write. These perform native-endian accesses. Note - * that some architectures will want to re-define __raw_{read,write}w. - */ -extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen); -extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); -extern void __raw_writesl(void __iomem *addr, const void *data, int longlen); - -extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); -extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); -extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); - -#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v)) -#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)) -#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v)) - -#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) -#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) -#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) - -/* - * Architecture ioremap implementation. - */ -#define MT_DEVICE 0 -#define MT_DEVICE_NONSHARED 1 -#define MT_DEVICE_CACHED 2 -#define MT_DEVICE_IXP2000 3 -/* - * types 4 onwards can be found in asm/mach/map.h and are undefined - * for ioremap - */ - -/* - * __arm_ioremap takes CPU physical address. - * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page - */ -extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); -extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int); -extern void __iounmap(volatile void __iomem *addr); - -/* - * Bad read/write accesses... - */ -extern void __readwrite_bug(const char *fn); - -/* - * Now, pick up the machine-defined IO definitions - */ -#include - -/* - * IO port access primitives - * ------------------------- - * - * The ARM doesn't have special IO access instructions; all IO is memory - * mapped. Note that these are defined to perform little endian accesses - * only. Their primary purpose is to access PCI and ISA peripherals. - * - * Note that for a big endian machine, this implies that the following - * big endian mode connectivity is in place, as described by numerous - * ARM documents: - * - * PCI: D0-D7 D8-D15 D16-D23 D24-D31 - * ARM: D24-D31 D16-D23 D8-D15 D0-D7 - * - * The machine specific io.h include defines __io to translate an "IO" - * address to a memory address. - * - * Note that we prevent GCC re-ordering or caching values in expressions - * by introducing sequence points into the in*() definitions. Note that - * __raw_* do not guarantee this behaviour. - * - * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. - */ -#ifdef __io -#define outb(v,p) __raw_writeb(v,__io(p)) -#define outw(v,p) __raw_writew((__force __u16) \ - cpu_to_le16(v),__io(p)) -#define outl(v,p) __raw_writel((__force __u32) \ - cpu_to_le32(v),__io(p)) - -#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) -#define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__io(p))); __v; }) -#define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__io(p))); __v; }) - -#define outsb(p,d,l) __raw_writesb(__io(p),d,l) -#define outsw(p,d,l) __raw_writesw(__io(p),d,l) -#define outsl(p,d,l) __raw_writesl(__io(p),d,l) - -#define insb(p,d,l) __raw_readsb(__io(p),d,l) -#define insw(p,d,l) __raw_readsw(__io(p),d,l) -#define insl(p,d,l) __raw_readsl(__io(p),d,l) -#endif - -#define outb_p(val,port) outb((val),(port)) -#define outw_p(val,port) outw((val),(port)) -#define outl_p(val,port) outl((val),(port)) -#define inb_p(port) inb((port)) -#define inw_p(port) inw((port)) -#define inl_p(port) inl((port)) - -#define outsb_p(port,from,len) outsb(port,from,len) -#define outsw_p(port,from,len) outsw(port,from,len) -#define outsl_p(port,from,len) outsl(port,from,len) -#define insb_p(port,to,len) insb(port,to,len) -#define insw_p(port,to,len) insw(port,to,len) -#define insl_p(port,to,len) insl(port,to,len) - -/* - * String version of IO memory access ops: - */ -extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t); -extern void _memcpy_toio(volatile void __iomem *, const void *, size_t); -extern void _memset_io(volatile void __iomem *, int, size_t); - -#define mmiowb() - -/* - * Memory access primitives - * ------------------------ - * - * These perform PCI memory accesses via an ioremap region. They don't - * take an address as such, but a cookie. - * - * Again, this are defined to perform little endian accesses. See the - * IO port primitives for more information. - */ -#ifdef __mem_pci -#define readb(c) ({ __u8 __v = __raw_readb(__mem_pci(c)); __v; }) -#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__mem_pci(c))); __v; }) -#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__mem_pci(c))); __v; }) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define readsb(p,d,l) __raw_readsb(__mem_pci(p),d,l) -#define readsw(p,d,l) __raw_readsw(__mem_pci(p),d,l) -#define readsl(p,d,l) __raw_readsl(__mem_pci(p),d,l) - -#define writeb(v,c) __raw_writeb(v,__mem_pci(c)) -#define writew(v,c) __raw_writew((__force __u16) \ - cpu_to_le16(v),__mem_pci(c)) -#define writel(v,c) __raw_writel((__force __u32) \ - cpu_to_le32(v),__mem_pci(c)) - -#define writesb(p,d,l) __raw_writesb(__mem_pci(p),d,l) -#define writesw(p,d,l) __raw_writesw(__mem_pci(p),d,l) -#define writesl(p,d,l) __raw_writesl(__mem_pci(p),d,l) - -#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l)) -#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) -#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) - -#elif !defined(readb) - -#define readb(c) (__readwrite_bug("readb"),0) -#define readw(c) (__readwrite_bug("readw"),0) -#define readl(c) (__readwrite_bug("readl"),0) -#define writeb(v,c) __readwrite_bug("writeb") -#define writew(v,c) __readwrite_bug("writew") -#define writel(v,c) __readwrite_bug("writel") - -#define check_signature(io,sig,len) (0) - -#endif /* __mem_pci */ - -/* - * ioremap and friends. - * - * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. - * - */ -#ifndef __arch_ioremap -#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) -#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) -#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED) -#define iounmap(cookie) __iounmap(cookie) -#else -#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) -#define iounmap(cookie) __arch_iounmap(cookie) -#endif - -/* - * io{read,write}{8,16,32} macros - */ -#ifndef ioread8 -#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) -#define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; }) -#define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; }) - -#define iowrite8(v,p) __raw_writeb(v, p) -#define iowrite16(v,p) __raw_writew((__force __u16)cpu_to_le16(v), p) -#define iowrite32(v,p) __raw_writel((__force __u32)cpu_to_le32(v), p) - -#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) -#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) -#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) - -#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) -#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) -#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) - -extern void __iomem *ioport_map(unsigned long port, unsigned int nr); -extern void ioport_unmap(void __iomem *addr); -#endif - -struct pci_dev; - -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen); -extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); - -/* - * can the hardware map this into one segment or not, given no other - * constraints. - */ -#define BIOVEC_MERGEABLE(vec1, vec2) \ - ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) - -#ifdef CONFIG_MMU -#define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern int valid_phys_addr_range(unsigned long addr, size_t size); -extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); -#endif - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -/* - * Register ISA memory and port locations for glibc iopl/inb/outb - * emulation. - */ -extern void register_isa_ports(unsigned int mmio, unsigned int io, - unsigned int io_shift); - -#endif /* __KERNEL__ */ -#endif /* __ASM_ARM_IO_H */ diff --git a/include/asm-arm/ioctl.h b/include/asm-arm/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/include/asm-arm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h deleted file mode 100644 index a91d8a1523c..00000000000 --- a/include/asm-arm/ioctls.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef __ASM_ARM_IOCTLS_H -#define __ASM_ARM_IOCTLS_H - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif diff --git a/include/asm-arm/ipcbuf.h b/include/asm-arm/ipcbuf.h deleted file mode 100644 index 97683975f7d..00000000000 --- a/include/asm-arm/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASMARM_IPCBUF_H -#define __ASMARM_IPCBUF_H - -/* - * The ipc64_perm structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASMARM_IPCBUF_H */ diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h deleted file mode 100644 index 9cb01907e43..00000000000 --- a/include/asm-arm/irq.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_ARM_IRQ_H -#define __ASM_ARM_IRQ_H - -#include - -#ifndef irq_canonicalize -#define irq_canonicalize(i) (i) -#endif - -#ifndef NR_IRQS -#define NR_IRQS 128 -#endif - -/* - * Use this value to indicate lack of interrupt - * capability - */ -#ifndef NO_IRQ -#define NO_IRQ ((unsigned int)(-1)) -#endif - -#ifndef __ASSEMBLY__ -struct irqaction; -extern void migrate_irqs(void); -#endif - -#endif - diff --git a/include/asm-arm/irq_regs.h b/include/asm-arm/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/include/asm-arm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/irqflags.h b/include/asm-arm/irqflags.h deleted file mode 100644 index 6d09974e664..00000000000 --- a/include/asm-arm/irqflags.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef __ASM_ARM_IRQFLAGS_H -#define __ASM_ARM_IRQFLAGS_H - -#ifdef __KERNEL__ - -#include - -/* - * CPU interrupt mask handling. - */ -#if __LINUX_ARM_ARCH__ >= 6 - -#define raw_local_irq_save(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ - "cpsid i" \ - : "=r" (x) : : "memory", "cc"); \ - }) - -#define raw_local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc") -#define raw_local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc") -#define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") -#define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") - -#else - -/* - * Save the current interrupt enable state & disable IRQs - */ -#define raw_local_irq_save(x) \ - ({ \ - unsigned long temp; \ - (void) (&temp == &x); \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ -" orr %1, %0, #128\n" \ -" msr cpsr_c, %1" \ - : "=r" (x), "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Enable IRQs - */ -#define raw_local_irq_enable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_enable\n" \ -" bic %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Disable IRQs - */ -#define raw_local_irq_disable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_disable\n" \ -" orr %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Enable FIQs - */ -#define local_fiq_enable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ stf\n" \ -" bic %0, %0, #64\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Disable FIQs - */ -#define local_fiq_disable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ clf\n" \ -" orr %0, %0, #64\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -#endif - -/* - * Save the current interrupt enable state. - */ -#define raw_local_save_flags(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_save_flags" \ - : "=r" (x) : : "memory", "cc"); \ - }) - -/* - * restore saved IRQ & FIQ state - */ -#define raw_local_irq_restore(x) \ - __asm__ __volatile__( \ - "msr cpsr_c, %0 @ local_irq_restore\n" \ - : \ - : "r" (x) \ - : "memory", "cc") - -#define raw_irqs_disabled_flags(flags) \ -({ \ - (int)((flags) & PSR_I_BIT); \ -}) - -#endif -#endif diff --git a/include/asm-arm/kdebug.h b/include/asm-arm/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/include/asm-arm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h deleted file mode 100644 index c8986bb99ed..00000000000 --- a/include/asm-arm/kexec.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ARM_KEXEC_H -#define _ARM_KEXEC_H - -#ifdef CONFIG_KEXEC - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) -/* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -#define KEXEC_ARCH KEXEC_ARCH_ARM - -#define KEXEC_ARM_ATAGS_OFFSET 0x1000 -#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000 - -#ifndef __ASSEMBLY__ - -struct kimage; -/* Provide a dummy definition to avoid build failures. */ -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) { } - -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_KEXEC */ - -#endif /* _ARM_KEXEC_H */ diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h deleted file mode 100644 index 67af4b84198..00000000000 --- a/include/asm-arm/kgdb.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * ARM KGDB support - * - * Author: Deepak Saxena - * - * Copyright (C) 2002 MontaVista Software Inc. - * - */ - -#ifndef __ARM_KGDB_H__ -#define __ARM_KGDB_H__ - -#include - -/* - * GDB assumes that we're a user process being debugged, so - * it will send us an SWI command to write into memory as the - * debug trap. When an SWI occurs, the next instruction addr is - * placed into R14_svc before jumping to the vector trap. - * This doesn't work for kernel debugging as we are already in SVC - * we would loose the kernel's LR, which is a bad thing. This - * is bad thing. - * - * By doing this as an undefined instruction trap, we force a mode - * switch from SVC to UND mode, allowing us to save full kernel state. - * - * We also define a KGDB_COMPILED_BREAK which can be used to compile - * in breakpoints. This is important for things like sysrq-G and for - * the initial breakpoint from trap_init(). - * - * Note to ARM HW designers: Add real trap support like SH && PPC to - * make our lives much much simpler. :) - */ -#define BREAK_INSTR_SIZE 4 -#define GDB_BREAKINST 0xef9f0001 -#define KGDB_BREAKINST 0xe7ffdefe -#define KGDB_COMPILED_BREAK 0xe7ffdeff -#define CACHE_FLUSH_IS_SAFE 1 - -#ifndef __ASSEMBLY__ - -static inline void arch_kgdb_breakpoint(void) -{ - asm(".word 0xe7ffdeff"); -} - -extern void kgdb_handle_bus_error(void); -extern int kgdb_fault_expected; - -#endif /* !__ASSEMBLY__ */ - -/* - * From Kevin Hilman: - * - * gdb is expecting the following registers layout. - * - * r0-r15: 1 long word each - * f0-f7: unused, 3 long words each !! - * fps: unused, 1 long word - * cpsr: 1 long word - * - * Even though f0-f7 and fps are not used, they need to be - * present in the registers sent for correct processing in - * the host-side gdb. - * - * In particular, it is crucial that CPSR is in the right place, - * otherwise gdb will not be able to correctly interpret stepping over - * conditional branches. - */ -#define _GP_REGS 16 -#define _FP_REGS 8 -#define _EXTRA_REGS 2 -#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) - -#define KGDB_MAX_NO_CPUS 1 -#define BUFMAX 400 -#define NUMREGBYTES (GDB_MAX_REGS << 2) -#define NUMCRITREGBYTES (32 << 2) - -#define _R0 0 -#define _R1 1 -#define _R2 2 -#define _R3 3 -#define _R4 4 -#define _R5 5 -#define _R6 6 -#define _R7 7 -#define _R8 8 -#define _R9 9 -#define _R10 10 -#define _FP 11 -#define _IP 12 -#define _SPT 13 -#define _LR 14 -#define _PC 15 -#define _CPSR (GDB_MAX_REGS - 1) - -/* - * So that we can denote the end of a frame for tracing, - * in the simple case: - */ -#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func) - -#endif /* __ASM_KGDB_H__ */ diff --git a/include/asm-arm/kmap_types.h b/include/asm-arm/kmap_types.h deleted file mode 100644 index 45def13ee17..00000000000 --- a/include/asm-arm/kmap_types.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ARM_KMAP_TYPES_H -#define __ARM_KMAP_TYPES_H - -/* - * This is the "bare minimum". AIO seems to require this. - */ -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h deleted file mode 100644 index b1a37876942..00000000000 --- a/include/asm-arm/kprobes.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * include/asm-arm/kprobes.h - * - * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#ifndef _ARM_KPROBES_H -#define _ARM_KPROBES_H - -#include -#include -#include - -#define __ARCH_WANT_KPROBES_INSN_SLOT -#define MAX_INSN_SIZE 2 -#define MAX_STACK_SIZE 64 /* 32 would probably be OK */ - -/* - * This undefined instruction must be unique and - * reserved solely for kprobes' use. - */ -#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8 - -#define regs_return_value(regs) ((regs)->ARM_r0) -#define flush_insn_slot(p) do { } while (0) -#define kretprobe_blacklist_size 0 - -typedef u32 kprobe_opcode_t; - -struct kprobe; -typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); - -/* Architecture specific copy of original instruction. */ -struct arch_specific_insn { - kprobe_opcode_t *insn; - kprobe_insn_handler_t *insn_handler; -}; - -struct prev_kprobe { - struct kprobe *kp; - unsigned int status; -}; - -/* per-cpu kprobe control block */ -struct kprobe_ctlblk { - unsigned int kprobe_status; - struct prev_kprobe prev_kprobe; - struct pt_regs jprobe_saved_regs; - char jprobes_stack[MAX_STACK_SIZE]; -}; - -void arch_remove_kprobe(struct kprobe *); -void kretprobe_trampoline(void); - -int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr); -int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); -int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -enum kprobe_insn { - INSN_REJECTED, - INSN_GOOD, - INSN_GOOD_NO_SLOT -}; - -enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t, - struct arch_specific_insn *); -void __init arm_kprobe_decode_init(void); - -#endif /* _ARM_KPROBES_H */ diff --git a/include/asm-arm/leds.h b/include/asm-arm/leds.h deleted file mode 100644 index 12290ea5580..00000000000 --- a/include/asm-arm/leds.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/leds.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Event-driven interface for LEDs on machines - * Added led_start and led_stop- Alex Holden, 28th Dec 1998. - */ -#ifndef ASM_ARM_LEDS_H -#define ASM_ARM_LEDS_H - - -typedef enum { - led_idle_start, - led_idle_end, - led_timer, - led_start, - led_stop, - led_claim, /* override idle & timer leds */ - led_release, /* restore idle & timer leds */ - led_start_timer_mode, - led_stop_timer_mode, - led_green_on, - led_green_off, - led_amber_on, - led_amber_off, - led_red_on, - led_red_off, - led_blue_on, - led_blue_off, - /* - * I want this between led_timer and led_start, but - * someone has decided to export this to user space - */ - led_halted -} led_event_t; - -/* Use this routine to handle LEDs */ - -#ifdef CONFIG_LEDS -extern void (*leds_event)(led_event_t); -#else -#define leds_event(e) -#endif - -#endif diff --git a/include/asm-arm/limits.h b/include/asm-arm/limits.h deleted file mode 100644 index 08d8c660080..00000000000 --- a/include/asm-arm/limits.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_PIPE_H -#define __ASM_PIPE_H - -#ifndef PAGE_SIZE -#include -#endif - -#define PIPE_BUF PAGE_SIZE - -#endif - diff --git a/include/asm-arm/linkage.h b/include/asm-arm/linkage.h deleted file mode 100644 index 5a25632b1bc..00000000000 --- a/include/asm-arm/linkage.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .align 0 -#define __ALIGN_STR ".align 0" - -#define ENDPROC(name) \ - .type name, %function; \ - END(name) - -#endif diff --git a/include/asm-arm/local.h b/include/asm-arm/local.h deleted file mode 100644 index c11c530f74d..00000000000 --- a/include/asm-arm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/locks.h b/include/asm-arm/locks.h deleted file mode 100644 index 852220eecdb..00000000000 --- a/include/asm-arm/locks.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * linux/include/asm-arm/locks.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Interrupt safe locking assembler. - */ -#ifndef __ASM_PROC_LOCKS_H -#define __ASM_PROC_LOCKS_H - -#if __LINUX_ARM_ARCH__ >= 6 - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -"1: ldrex lr, [%1]\n" \ -" sub lr, lr, %2\n" \ -" strex ip, lr, [%1]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" cmp lr, #0\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#else - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%1]\n" \ -" subs lr, lr, %2\n" \ -" str lr, [%1]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#endif - -#endif diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h deleted file mode 100644 index bcc8aed7c9a..00000000000 --- a/include/asm-arm/mach/arch.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * linux/include/asm-arm/mach/arch.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASSEMBLY__ - -struct tag; -struct meminfo; -struct sys_timer; - -struct machine_desc { - /* - * Note! The first four elements are used - * by assembler code in head.S, head-common.S - */ - unsigned int nr; /* architecture number */ - unsigned int phys_io; /* start of physical io */ - unsigned int io_pg_offst; /* byte offset for io - * page tabe entry */ - - const char *name; /* architecture name */ - unsigned long boot_params; /* tagged list */ - - unsigned int video_start; /* start of video RAM */ - unsigned int video_end; /* end of video RAM */ - - unsigned int reserve_lp0 :1; /* never has lp0 */ - unsigned int reserve_lp1 :1; /* never has lp1 */ - unsigned int reserve_lp2 :1; /* never has lp2 */ - unsigned int soft_reboot :1; /* soft reboot */ - void (*fixup)(struct machine_desc *, - struct tag *, char **, - struct meminfo *); - void (*map_io)(void);/* IO mapping function */ - void (*init_irq)(void); - struct sys_timer *timer; /* system tick timer */ - void (*init_machine)(void); -}; - -/* - * Set of macros to define architecture features. This is built into - * a table by the linker. - */ -#define MACHINE_START(_type,_name) \ -static const struct machine_desc __mach_desc_##_type \ - __used \ - __attribute__((__section__(".arch.info.init"))) = { \ - .nr = MACH_TYPE_##_type, \ - .name = _name, - -#define MACHINE_END \ -}; - -#endif diff --git a/include/asm-arm/mach/dma.h b/include/asm-arm/mach/dma.h deleted file mode 100644 index e7c4a20aad5..00000000000 --- a/include/asm-arm/mach/dma.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/mach/dma.h - * - * Copyright (C) 1998-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This header file describes the interface between the generic DMA handler - * (dma.c) and the architecture-specific DMA backends (dma-*.c) - */ - -struct dma_struct; -typedef struct dma_struct dma_t; - -struct dma_ops { - int (*request)(dmach_t, dma_t *); /* optional */ - void (*free)(dmach_t, dma_t *); /* optional */ - void (*enable)(dmach_t, dma_t *); /* mandatory */ - void (*disable)(dmach_t, dma_t *); /* mandatory */ - int (*residue)(dmach_t, dma_t *); /* optional */ - int (*setspeed)(dmach_t, dma_t *, int); /* optional */ - char *type; -}; - -struct dma_struct { - void *addr; /* single DMA address */ - unsigned long count; /* single DMA size */ - struct scatterlist buf; /* single DMA */ - int sgcount; /* number of DMA SG */ - struct scatterlist *sg; /* DMA Scatter-Gather List */ - - unsigned int active:1; /* Transfer active */ - unsigned int invalid:1; /* Address/Count changed */ - - dmamode_t dma_mode; /* DMA mode */ - int speed; /* DMA speed */ - - unsigned int lock; /* Device is allocated */ - const char *device_id; /* Device name */ - - unsigned int dma_base; /* Controller base address */ - int dma_irq; /* Controller IRQ */ - struct scatterlist cur_sg; /* Current controller buffer */ - unsigned int state; - - struct dma_ops *d_ops; -}; - -/* Prototype: void arch_dma_init(dma) - * Purpose : Initialise architecture specific DMA - * Params : dma - pointer to array of DMA structures - */ -extern void arch_dma_init(dma_t *dma); - -extern void isa_init_dma(dma_t *dma); diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h deleted file mode 100644 index 05b029ef637..00000000000 --- a/include/asm-arm/mach/flash.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/mach/flash.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_MACH_FLASH_H -#define ASMARM_MACH_FLASH_H - -struct mtd_partition; -struct mtd_info; - -/* - * map_name: the map probe function name - * name: flash device name (eg, as used with mtdparts=) - * width: width of mapped device - * init: method called at driver/device initialisation - * exit: method called at driver/device removal - * set_vpp: method called to enable or disable VPP - * mmcontrol: method called to enable or disable Sync. Burst Read in OneNAND - * parts: optional array of mtd_partitions for static partitioning - * nr_parts: number of mtd_partitions for static partitoning - */ -struct flash_platform_data { - const char *map_name; - const char *name; - unsigned int width; - int (*init)(void); - void (*exit)(void); - void (*set_vpp)(int on); - void (*mmcontrol)(struct mtd_info *mtd, int sync_read); - struct mtd_partition *parts; - unsigned int nr_parts; -}; - -#endif diff --git a/include/asm-arm/mach/irda.h b/include/asm-arm/mach/irda.h deleted file mode 100644 index 58984d9c0b0..00000000000 --- a/include/asm-arm/mach/irda.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/mach/irda.h - * - * Copyright (C) 2004 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_IRDA_H -#define __ASM_ARM_MACH_IRDA_H - -struct irda_platform_data { - int (*startup)(struct device *); - void (*shutdown)(struct device *); - int (*set_power)(struct device *, unsigned int state); - void (*set_speed)(struct device *, unsigned int speed); -}; - -#endif diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h deleted file mode 100644 index eb0bfba6570..00000000000 --- a/include/asm-arm/mach/irq.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-arm/mach/irq.h - * - * Copyright (C) 1995-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_IRQ_H -#define __ASM_ARM_MACH_IRQ_H - -#include - -struct seq_file; - -/* - * This is internal. Do not use it. - */ -extern void (*init_arch_irq)(void); -extern void init_FIQ(void); -extern int show_fiq_list(struct seq_file *, void *); - -/* - * Obsolete inline function for calling irq descriptor handlers. - */ -static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - desc->handle_irq(irq, desc); -} - -void set_irq_flags(unsigned int irq, unsigned int flags); - -#define IRQF_VALID (1 << 0) -#define IRQF_PROBE (1 << 1) -#define IRQF_NOAUTOEN (1 << 2) - -/* - * This is for easy migration, but should be changed in the source - */ -#define do_bad_IRQ(irq,desc) \ -do { \ - spin_lock(&desc->lock); \ - handle_bad_irq(irq, desc); \ - spin_unlock(&desc->lock); \ -} while(0) - -extern unsigned long irq_err_count; -static inline void ack_bad_irq(int irq) -{ - irq_err_count++; -} - -#endif diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h deleted file mode 100644 index 7ef3c839018..00000000000 --- a/include/asm-arm/mach/map.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/map.h - * - * Copyright (C) 1999-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Page table mapping constructs and function prototypes - */ -#include - -struct map_desc { - unsigned long virtual; - unsigned long pfn; - unsigned long length; - unsigned int type; -}; - -/* types 0-3 are defined in asm/io.h */ -#define MT_CACHECLEAN 4 -#define MT_MINICLEAN 5 -#define MT_LOW_VECTORS 6 -#define MT_HIGH_VECTORS 7 -#define MT_MEMORY 8 -#define MT_ROM 9 - -#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED -#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000 - -#ifdef CONFIG_MMU -extern void iotable_init(struct map_desc *, int); -#else -#define iotable_init(map,num) do { } while (0) -#endif diff --git a/include/asm-arm/mach/mmc.h b/include/asm-arm/mach/mmc.h deleted file mode 100644 index eb91145c00c..00000000000 --- a/include/asm-arm/mach/mmc.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-arm/mach/mmc.h - */ -#ifndef ASMARM_MACH_MMC_H -#define ASMARM_MACH_MMC_H - -#include - -struct mmc_platform_data { - unsigned int ocr_mask; /* available voltages */ - u32 (*translate_vdd)(struct device *, unsigned int); - unsigned int (*status)(struct device *); -}; - -#endif diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h deleted file mode 100644 index 9d4f6b5ea41..00000000000 --- a/include/asm-arm/mach/pci.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * linux/include/asm-arm/mach/pci.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -struct pci_sys_data; -struct pci_bus; - -struct hw_pci { - struct list_head buses; - int nr_controllers; - int (*setup)(int nr, struct pci_sys_data *); - struct pci_bus *(*scan)(int nr, struct pci_sys_data *); - void (*preinit)(void); - void (*postinit)(void); - u8 (*swizzle)(struct pci_dev *dev, u8 *pin); - int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin); -}; - -/* - * Per-controller structure - */ -struct pci_sys_data { - struct list_head node; - int busnr; /* primary bus number */ - u64 mem_offset; /* bus->cpu memory mapping offset */ - unsigned long io_offset; /* bus->cpu IO mapping offset */ - struct pci_bus *bus; /* PCI bus */ - struct resource *resource[3]; /* Primary PCI bus resources */ - /* Bridge swizzling */ - u8 (*swizzle)(struct pci_dev *, u8 *); - /* IRQ mapping */ - int (*map_irq)(struct pci_dev *, u8, u8); - struct hw_pci *hw; -}; - -/* - * This is the standard PCI-PCI bridge swizzling algorithm. - */ -u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp); - -/* - * Call this with your hw_pci struct to initialise the PCI system. - */ -void pci_common_init(struct hw_pci *); - -/* - * PCI controllers - */ -extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); -extern void iop3xx_pci_preinit(void); -extern void iop3xx_pci_preinit_cond(void); - -extern int dc21285_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); -extern void dc21285_preinit(void); -extern void dc21285_postinit(void); - -extern int via82c505_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *); -extern void via82c505_init(void *sysdata); - -extern int pci_v3_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *); -extern void pci_v3_preinit(void); -extern void pci_v3_postinit(void); diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h deleted file mode 100644 index 55b317a8906..00000000000 --- a/include/asm-arm/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct atmel_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void atmel_register_uart_fns(struct atmel_port_fns *fns); -#else -#define atmel_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/include/asm-arm/mach/serial_sa1100.h b/include/asm-arm/mach/serial_sa1100.h deleted file mode 100644 index 20c22bb218d..00000000000 --- a/include/asm-arm/mach/serial_sa1100.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_sa1100.h - * - * Author: Nicolas Pitre - * - * Moved to include/asm-arm/mach and changed lots, Russell King - * - * Low level machine dependent UART functions. - */ - -struct uart_port; -struct uart_info; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct sa1100_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); -}; - -#ifdef CONFIG_SERIAL_SA1100 -void sa1100_register_uart_fns(struct sa1100_port_fns *fns); -void sa1100_register_uart(int idx, int port); -#else -#define sa1100_register_uart_fns(fns) do { } while (0) -#define sa1100_register_uart(idx,port) do { } while (0) -#endif diff --git a/include/asm-arm/mach/sharpsl_param.h b/include/asm-arm/mach/sharpsl_param.h deleted file mode 100644 index 7a24ecf0422..00000000000 --- a/include/asm-arm/mach/sharpsl_param.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Hardware parameter area specific to Sharp SL series devices - * - * Copyright (c) 2005 Richard Purdie - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -struct sharpsl_param_info { - unsigned int comadj_keyword; - unsigned int comadj; - - unsigned int uuid_keyword; - unsigned char uuid[16]; - - unsigned int touch_keyword; - unsigned int touch_xp; - unsigned int touch_yp; - unsigned int touch_xd; - unsigned int touch_yd; - - unsigned int adadj_keyword; - unsigned int adadj; - - unsigned int phad_keyword; - unsigned int phadadj; -} __attribute__((packed)); - - -extern struct sharpsl_param_info sharpsl_param; -extern void sharpsl_save_param(void); - diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h deleted file mode 100644 index 2fd36ea0130..00000000000 --- a/include/asm-arm/mach/time.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/mach/time.h - * - * Copyright (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_TIME_H -#define __ASM_ARM_MACH_TIME_H - -#include - -/* - * This is our kernel timer structure. - * - * - init - * Initialise the kernels jiffy timer source, claim interrupt - * using setup_irq. This is called early on during initialisation - * while interrupts are still disabled on the local CPU. - * - suspend - * Suspend the kernel jiffy timer source, if necessary. This - * is called with interrupts disabled, after all normal devices - * have been suspended. If no action is required, set this to - * NULL. - * - resume - * Resume the kernel jiffy timer source, if necessary. This - * is called with interrupts disabled before any normal devices - * are resumed. If no action is required, set this to NULL. - * - offset - * Return the timer offset in microseconds since the last timer - * interrupt. Note: this must take account of any unprocessed - * timer interrupt which may be pending. - */ -struct sys_timer { - struct sys_device dev; - void (*init)(void); - void (*suspend)(void); - void (*resume)(void); -#ifndef CONFIG_GENERIC_TIME - unsigned long (*offset)(void); -#endif -}; - -extern struct sys_timer *system_timer; -extern void timer_tick(void); - -/* - * Kernel time keeping support. - */ -struct timespec; -extern int (*set_rtc)(void); -extern void save_time_delta(struct timespec *delta, struct timespec *rtc); -extern void restore_time_delta(struct timespec *delta, struct timespec *rtc); - -#endif diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h deleted file mode 100644 index 9e5ed7c0f27..00000000000 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/mach/udc_pxa2xx.h - * - * This supports machine-specific differences in how the PXA2xx - * USB Device Controller (UDC) is wired. - * - * It is set in linux/arch/arm/mach-pxa/.c or in - * linux/arch/mach-ixp4xx/.c and used in - * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c - */ - -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ - - /* Boards following the design guidelines in the developer's manual, - * with on-chip GPIOs not Lubbock's weird hardware, can have a sane - * VBUS IRQ and omit the methods above. Store the GPIO number - * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. - * Note that sometimes the signals go through inverters... - */ - bool gpio_vbus_inverted; - u16 gpio_vbus; /* high == vbus present */ - bool gpio_pullup_inverted; - u16 gpio_pullup; /* high == pullup activated */ -}; - diff --git a/include/asm-arm/mc146818rtc.h b/include/asm-arm/mc146818rtc.h deleted file mode 100644 index 7b81e0c4254..00000000000 --- a/include/asm-arm/mc146818rtc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - -#include -#include - -#ifndef RTC_PORT -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ -#endif - -/* - * The yet supported machines all access the RTC index register via - * an ISA port access but the way to access the date register differs ... - */ -#define CMOS_READ(addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -outb_p((val),RTC_PORT(1)); \ -}) - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h deleted file mode 100644 index 9ba4d7136e6..00000000000 --- a/include/asm-arm/memory.h +++ /dev/null @@ -1,334 +0,0 @@ -/* - * linux/include/asm-arm/memory.h - * - * Copyright (C) 2000-2002 Russell King - * modification for nommu, Hyok S. Choi, 2004 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note: this file should not be included by non-asm/.h files - */ -#ifndef __ASM_ARM_MEMORY_H -#define __ASM_ARM_MEMORY_H - -/* - * Allow for constants defined here to be used from assembly code - * by prepending the UL suffix only with actual C code compilation. - */ -#ifndef __ASSEMBLY__ -#define UL(x) (x##UL) -#else -#define UL(x) (x) -#endif - -#include -#include -#include - -#ifdef CONFIG_MMU - -#ifndef TASK_SIZE -/* - * TASK_SIZE - the maximum size of a user space task. - * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area - */ -#define TASK_SIZE UL(0xbf000000) -#define TASK_UNMAPPED_BASE UL(0x40000000) -#endif - -/* - * The maximum size of a 26-bit user space task. - */ -#define TASK_SIZE_26 UL(0x04000000) - -/* - * Page offset: 3GB - */ -#ifndef PAGE_OFFSET -#define PAGE_OFFSET UL(0xc0000000) -#endif - -/* - * The module space lives between the addresses given by TASK_SIZE - * and PAGE_OFFSET - it must be within 32MB of the kernel text. - */ -#define MODULE_END (PAGE_OFFSET) -#define MODULE_START (MODULE_END - 16*1048576) - -#if TASK_SIZE > MODULE_START -#error Top of user space clashes with start of module space -#endif - -/* - * The XIP kernel gets mapped at the bottom of the module vm area. - * Since we use sections to map it, this macro replaces the physical address - * with its virtual address while keeping offset from the base section. - */ -#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) - -/* - * Allow 16MB-aligned ioremap pages - */ -#define IOREMAP_MAX_ORDER 24 - -#else /* CONFIG_MMU */ - -/* - * The limitation of user task size can grow up to the end of free ram region. - * It is difficult to define and perhaps will never meet the original meaning - * of this define that was meant to. - * Fortunately, there is no reference for this in noMMU mode, for now. - */ -#ifndef TASK_SIZE -#define TASK_SIZE (CONFIG_DRAM_SIZE) -#endif - -#ifndef TASK_UNMAPPED_BASE -#define TASK_UNMAPPED_BASE UL(0x00000000) -#endif - -#ifndef PHYS_OFFSET -#define PHYS_OFFSET (CONFIG_DRAM_BASE) -#endif - -#ifndef END_MEM -#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE) -#endif - -#ifndef PAGE_OFFSET -#define PAGE_OFFSET (PHYS_OFFSET) -#endif - -/* - * The module can be at any place in ram in nommu mode. - */ -#define MODULE_END (END_MEM) -#define MODULE_START (PHYS_OFFSET) - -#endif /* !CONFIG_MMU */ - -/* - * Size of DMA-consistent memory region. Must be multiple of 2M, - * between 2MB and 14MB inclusive. - */ -#ifndef CONSISTENT_DMA_SIZE -#define CONSISTENT_DMA_SIZE SZ_2M -#endif - -/* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ -#ifndef __virt_to_phys -#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) -#endif - -/* - * Convert a physical address to a Page Frame Number and back - */ -#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) -#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) - -#ifndef __ASSEMBLY__ - -/* - * The DMA mask corresponding to the maximum bus address allocatable - * using GFP_DMA. The default here places no restriction on DMA - * allocations. This must be the smallest DMA mask in the system, - * so a successful GFP_DMA allocation will always satisfy this. - */ -#ifndef ISA_DMA_THRESHOLD -#define ISA_DMA_THRESHOLD (0xffffffffULL) -#endif - -#ifndef arch_adjust_zones -#define arch_adjust_zones(node,size,holes) do { } while (0) -#endif - -/* - * PFNs are used to describe any physical page; this means - * PFN 0 == physical address 0. - * - * This is the PFN of the first RAM page in the kernel - * direct-mapped view. We assume this is the first page - * of RAM in the mem_map as well. - */ -#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) - -/* - * These are *only* valid on the kernel direct mapped RAM memory. - * Note: Drivers should NOT use these. They are the wrong - * translation for translating DMA addresses. Use the driver - * DMA support - see dma-mapping.h. - */ -static inline unsigned long virt_to_phys(void *x) -{ - return __virt_to_phys((unsigned long)(x)); -} - -static inline void *phys_to_virt(unsigned long x) -{ - return (void *)(__phys_to_virt((unsigned long)(x))); -} - -/* - * Drivers should NOT use these either. - */ -#define __pa(x) __virt_to_phys((unsigned long)(x)) -#define __va(x) ((void *)__phys_to_virt((unsigned long)(x))) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -/* - * Virtual <-> DMA view memory address translations - * Again, these are *only* valid on the kernel direct mapped RAM - * memory. Use of these is *deprecated* (and that doesn't mean - * use the __ prefixed forms instead.) See dma-mapping.h. - */ -static inline __deprecated unsigned long virt_to_bus(void *x) -{ - return __virt_to_bus((unsigned long)x); -} - -static inline __deprecated void *bus_to_virt(unsigned long x) -{ - return (void *)__bus_to_virt(x); -} - -/* - * Conversion between a struct page and a physical address. - * - * Note: when converting an unknown physical address to a - * struct page, the resulting pointer must be validated - * using VALID_PAGE(). It must return an invalid struct page - * for any physical address not corresponding to a system - * RAM address. - * - * page_to_pfn(page) convert a struct page * to a PFN number - * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * - * pfn_valid(pfn) indicates whether a PFN number is valid - * - * virt_to_page(k) convert a _valid_ virtual address to struct page * - * virt_addr_valid(k) indicates whether a virtual address is valid - */ -#ifndef CONFIG_DISCONTIGMEM - -#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET - -#ifndef CONFIG_SPARSEMEM -#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) - -#define PHYS_TO_NID(addr) (0) - -#else /* CONFIG_DISCONTIGMEM */ - -/* - * This is more complex. We have a set of mem_map arrays spread - * around in memory. - */ -#include - -#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn) -#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT) - -#define pfn_valid(pfn) \ - ({ \ - unsigned int nid = PFN_TO_NID(pfn); \ - int valid = nid < MAX_NUMNODES; \ - if (valid) { \ - pg_data_t *node = NODE_DATA(nid); \ - valid = (pfn - node->node_start_pfn) < \ - node->node_spanned_pages; \ - } \ - valid; \ - }) - -#define virt_to_page(kaddr) \ - (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) - -#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES) - -/* - * Common discontigmem stuff. - * PHYS_TO_NID is used by the ARM kernel/setup.c - */ -#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and returns the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and returns the mem_map of that node. - */ -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -#ifdef NODE_MEM_SIZE_BITS -#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1) - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) \ - (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT)) - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT) - -#endif /* NODE_MEM_SIZE_BITS */ - -#endif /* !CONFIG_DISCONTIGMEM */ - -/* - * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die. - */ -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -/* - * Optional device DMA address remapping. Do _not_ use directly! - * We should really eliminate virt_to_bus() here - it's deprecated. - */ -#ifndef __arch_page_to_dma -#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page))) -#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr)) -#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr))) -#else -#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page)) -#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr)) -#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr)) -#endif - -/* - * Optional coherency support. Currently used only by selected - * Intel XSC3-based systems. - */ -#ifndef arch_is_coherent -#define arch_is_coherent() 0 -#endif - -#endif - -#include - -#endif diff --git a/include/asm-arm/mman.h b/include/asm-arm/mman.h deleted file mode 100644 index 54570d2e95b..00000000000 --- a/include/asm-arm/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ARM_MMAN_H__ -#define __ARM_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __ARM_MMAN_H__ */ diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h deleted file mode 100644 index 53099d4ee42..00000000000 --- a/include/asm-arm/mmu.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ARM_MMU_H -#define __ARM_MMU_H - -#ifdef CONFIG_MMU - -typedef struct { -#ifdef CONFIG_CPU_HAS_ASID - unsigned int id; -#endif - unsigned int kvm_seq; -} mm_context_t; - -#ifdef CONFIG_CPU_HAS_ASID -#define ASID(mm) ((mm)->context.id & 255) -#else -#define ASID(mm) (0) -#endif - -#else - -/* - * From nommu.h: - * Copyright (C) 2002, David McCullough - * modified for 2.6 by Hyok S. Choi - */ -typedef struct { - struct vm_list_struct *vmlist; - unsigned long end_brk; -} mm_context_t; - -#endif - -#endif diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h deleted file mode 100644 index 91b9dfdfed5..00000000000 --- a/include/asm-arm/mmu_context.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * linux/include/asm-arm/mmu_context.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - */ -#ifndef __ASM_ARM_MMU_CONTEXT_H -#define __ASM_ARM_MMU_CONTEXT_H - -#include -#include -#include -#include - -void __check_kvm_seq(struct mm_struct *mm); - -#ifdef CONFIG_CPU_HAS_ASID - -/* - * On ARMv6, we have the following structure in the Context ID: - * - * 31 7 0 - * +-------------------------+-----------+ - * | process ID | ASID | - * +-------------------------+-----------+ - * | context ID | - * +-------------------------------------+ - * - * The ASID is used to tag entries in the CPU caches and TLBs. - * The context ID is used by debuggers and trace logic, and - * should be unique within all running processes. - */ -#define ASID_BITS 8 -#define ASID_MASK ((~0) << ASID_BITS) -#define ASID_FIRST_VERSION (1 << ASID_BITS) - -extern unsigned int cpu_last_asid; - -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm); -void __new_context(struct mm_struct *mm); - -static inline void check_context(struct mm_struct *mm) -{ - if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) - __new_context(mm); - - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); -} - -#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0) - -#else - -static inline void check_context(struct mm_struct *mm) -{ - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); -} - -#define init_new_context(tsk,mm) 0 - -#endif - -#define destroy_context(mm) do { } while(0) - -/* - * This is called when "tsk" is about to enter lazy TLB mode. - * - * mm: describes the currently active mm context - * tsk: task which is entering lazy tlb - * cpu: cpu number which is entering lazy tlb - * - * tsk->mm will be NULL - */ -static inline void -enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -/* - * This is the actual mm switch as far as the scheduler - * is concerned. No registers are touched. We avoid - * calling the CPU specific function when the mm hasn't - * actually changed. - */ -static inline void -switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ -#ifdef CONFIG_MMU - unsigned int cpu = smp_processor_id(); - -#ifdef CONFIG_SMP - /* check for possible thread migration */ - if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask)) - __flush_icache_all(); -#endif - if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) { - check_context(next); - cpu_switch_mm(next->pgd, next); - if (cache_is_vivt()) - cpu_clear(cpu, prev->cpu_vm_mask); - } -#endif -} - -#define deactivate_mm(tsk,mm) do { } while (0) -#define activate_mm(prev,next) switch_mm(prev, next, NULL) - -#endif diff --git a/include/asm-arm/mmzone.h b/include/asm-arm/mmzone.h deleted file mode 100644 index b87de151f0a..00000000000 --- a/include/asm-arm/mmzone.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/include/asm-arm/mmzone.h - * - * 1999-12-29 Nicolas Pitre Created - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_MMZONE_H -#define __ASM_MMZONE_H - -/* - * Currently defined in arch/arm/mm/discontig.c - */ -extern pg_data_t discontig_node_data[]; - -/* - * Return a pointer to the node data for node n. - */ -#define NODE_DATA(nid) (&discontig_node_data[nid]) - -/* - * NODE_MEM_MAP gives the kaddr for the mem_map of the node. - */ -#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) - -#include - -#endif diff --git a/include/asm-arm/module.h b/include/asm-arm/module.h deleted file mode 100644 index 24b168dc31a..00000000000 --- a/include/asm-arm/module.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_ARM_MODULE_H -#define _ASM_ARM_MODULE_H - -struct mod_arch_specific -{ - int foo; -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -/* - * Include the ARM architecture version. - */ -#define MODULE_ARCH_VERMAGIC "ARMv" __stringify(__LINUX_ARM_ARCH__) " " - -#endif /* _ASM_ARM_MODULE_H */ diff --git a/include/asm-arm/msgbuf.h b/include/asm-arm/msgbuf.h deleted file mode 100644 index 33b35b946ea..00000000000 --- a/include/asm-arm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASMARM_MSGBUF_H -#define _ASMARM_MSGBUF_H - -/* - * The msqid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASMARM_MSGBUF_H */ diff --git a/include/asm-arm/mtd-xip.h b/include/asm-arm/mtd-xip.h deleted file mode 100644 index 9eb127cc7db..00000000000 --- a/include/asm-arm/mtd-xip.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ - */ - -#ifndef __ARM_MTD_XIP_H__ -#define __ARM_MTD_XIP_H__ - -#include -#include - -/* fill instruction prefetch */ -#define xip_iprefetch() do { asm volatile (".rep 8; nop; .endr"); } while (0) - -#endif /* __ARM_MTD_XIP_H__ */ diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h deleted file mode 100644 index 020bd98710a..00000000000 --- a/include/asm-arm/mutex.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * include/asm-arm/mutex.h - * - * ARM optimized mutex locking primitives - * - * Please look into asm-generic/mutex-xchg.h for a formal definition. - */ -#ifndef _ASM_MUTEX_H -#define _ASM_MUTEX_H - -#if __LINUX_ARM_ARCH__ < 6 -/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */ -# include -#else - -/* - * Attempting to lock a mutex on ARMv6+ can be done with a bastardized - * atomic decrement (it is not a reliable atomic decrement but it satisfies - * the defined semantics for our purpose, while being smaller and faster - * than a real atomic decrement or atomic swap. The idea is to attempt - * decrementing the lock value only once. If once decremented it isn't zero, - * or if its store-back fails due to a dispute on the exclusive store, we - * simply bail out immediately through the slow path where the lock will be - * reattempted until it succeeds. - */ -static inline void -__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - fail_fn(count); -} - -static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - __res = fail_fn(count); - return __res; -} - -/* - * Same trick is used for the unlock fast path. However the original value, - * rather than the result, is used to test for success in order to have - * better generated assembly. - */ -static inline void -__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "ldrex %0, [%3] \n\t" - "add %1, %0, #1 \n\t" - "strex %2, %1, [%3] " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __orig |= __ex_flag; - if (unlikely(__orig != 0)) - fail_fn(count); -} - -/* - * If the unlock was done on a contended lock, or if the unlock simply fails - * then the mutex remains locked. - */ -#define __mutex_slowpath_needs_to_unlock() 1 - -/* - * For __mutex_fastpath_trylock we use another construct which could be - * described as a "single value cmpxchg". - * - * This provides the needed trylock semantics like cmpxchg would, but it is - * lighter and less generic than a true cmpxchg implementation. - */ -static inline int -__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "1: ldrex %0, [%3] \n\t" - "subs %1, %0, #1 \n\t" - "strexeq %2, %1, [%3] \n\t" - "movlt %0, #0 \n\t" - "cmpeq %2, #0 \n\t" - "bgt 1b " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&count->counter) - : "cc", "memory" ); - - return __orig; -} - -#endif -#endif diff --git a/include/asm-arm/nwflash.h b/include/asm-arm/nwflash.h deleted file mode 100644 index 04e5a557a88..00000000000 --- a/include/asm-arm/nwflash.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _FLASH_H -#define _FLASH_H - -#define FLASH_MINOR 160 /* MAJOR is 10 - miscdevice */ -#define CMD_WRITE_DISABLE 0 -#define CMD_WRITE_ENABLE 0x28 -#define CMD_WRITE_BASE64K_ENABLE 0x47 - -#endif /* _FLASH_H */ diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h deleted file mode 100644 index ea1cde84f50..00000000000 --- a/include/asm-arm/page-nommu.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/page-nommu.h - * - * Copyright (C) 2004 Hyok S. Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _ASMARM_PAGE_NOMMU_H -#define _ASMARM_PAGE_NOMMU_H - -#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13 -#define KTHREAD_SIZE (8192) -#else -#define KTHREAD_SIZE PAGE_SIZE -#endif - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef unsigned long pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h deleted file mode 100644 index 7c5fc5582e5..00000000000 --- a/include/asm-arm/page.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * linux/include/asm-arm/page.h - * - * Copyright (C) 1995-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PAGE_H -#define _ASMARM_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifndef __ASSEMBLY__ - -#ifndef CONFIG_MMU - -#include "page-nommu.h" - -#else - -#include - -/* - * User Space Model - * ================ - * - * This section selects the correct set of functions for dealing with - * page-based copying and clearing for user space for the particular - * processor(s) we're building for. - * - * We have the following to choose from: - * v3 - ARMv3 - * v4wt - ARMv4 with writethrough cache, without minicache - * v4wb - ARMv4 with writeback cache, without minicache - * v4_mc - ARMv4 with minicache - * xscale - Xscale - * xsc3 - XScalev3 - */ -#undef _USER -#undef MULTI_USER - -#ifdef CONFIG_CPU_COPY_V3 -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v3 -# endif -#endif - -#ifdef CONFIG_CPU_COPY_V4WT -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v4wt -# endif -#endif - -#ifdef CONFIG_CPU_COPY_V4WB -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v4wb -# endif -#endif - -#ifdef CONFIG_CPU_COPY_FEROCEON -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER feroceon -# endif -#endif - -#ifdef CONFIG_CPU_SA1100 -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v4_mc -# endif -#endif - -#ifdef CONFIG_CPU_XSCALE -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER xscale_mc -# endif -#endif - -#ifdef CONFIG_CPU_XSC3 -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER xsc3_mc -# endif -#endif - -#ifdef CONFIG_CPU_COPY_V6 -# define MULTI_USER 1 -#endif - -#if !defined(_USER) && !defined(MULTI_USER) -#error Unknown user operations model -#endif - -struct cpu_user_fns { - void (*cpu_clear_user_page)(void *p, unsigned long user); - void (*cpu_copy_user_page)(void *to, const void *from, - unsigned long user); -}; - -#ifdef MULTI_USER -extern struct cpu_user_fns cpu_user; - -#define __cpu_clear_user_page cpu_user.cpu_clear_user_page -#define __cpu_copy_user_page cpu_user.cpu_copy_user_page - -#else - -#define __cpu_clear_user_page __glue(_USER,_clear_user_page) -#define __cpu_copy_user_page __glue(_USER,_copy_user_page) - -extern void __cpu_clear_user_page(void *p, unsigned long user); -extern void __cpu_copy_user_page(void *to, const void *from, - unsigned long user); -#endif - -#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr) -#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr) - -#define clear_page(page) memzero((void *)(page), PAGE_SIZE) -extern void copy_page(void *to, const void *from); - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd[2]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef unsigned long pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ - -#endif /* CONFIG_MMU */ - -typedef struct page *pgtable_t; - -#include - -#endif /* !__ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -/* - * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. - */ -#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) -#define ARCH_SLAB_MINALIGN 8 -#endif - -#include - -#endif diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h deleted file mode 100644 index 15806468ba7..00000000000 --- a/include/asm-arm/param.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/include/asm-arm/param.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PARAM_H -#define __ASM_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -/* max length of hostname */ -#define MAXHOSTNAMELEN 64 - -#endif - diff --git a/include/asm-arm/parport.h b/include/asm-arm/parport.h deleted file mode 100644 index f2f90c76ddd..00000000000 --- a/include/asm-arm/parport.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/parport.h: ARM-specific parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef __ASMARM_PARPORT_H -#define __ASMARM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports (autoirq, autodma); -} - -#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h deleted file mode 100644 index 2d84792f2e1..00000000000 --- a/include/asm-arm/pci.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef ASMARM_PCI_H -#define ASMARM_PCI_H - -#ifdef __KERNEL__ -#include - -#include /* for PCIBIOS_MIN_* */ - -#define pcibios_scan_all_fns(a, b) 0 - -#ifdef CONFIG_PCI_HOST_ITE8152 -/* ITE bridge requires setting latency timer to avoid early bus access - termination by PIC bus mater devices -*/ -extern void pcibios_set_master(struct pci_dev *dev); -#else -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} -#endif - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* - * The PCI address space does equal the physical memory address space. - * The networking and block device layers use this boolean for bounce - * buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (0) - -/* - * Whether pci_unmap_{single,page} is a nop depends upon the - * configuration. - */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -#define HAVE_PCI_MMAP -extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -/* - * Dummy implementation; always return 0. - */ -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return 0; -} - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-arm/percpu.h b/include/asm-arm/percpu.h deleted file mode 100644 index b4e32d8ec07..00000000000 --- a/include/asm-arm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_PERCPU -#define __ARM_PERCPU - -#include - -#endif diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h deleted file mode 100644 index 163b0305dd7..00000000000 --- a/include/asm-arm/pgalloc.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/include/asm-arm/pgalloc.h - * - * Copyright (C) 2000-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGALLOC_H -#define _ASMARM_PGALLOC_H - -#include -#include -#include -#include -#include - -#define check_pgt_cache() do { } while (0) - -#ifdef CONFIG_MMU - -#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER)) -#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL)) - -/* - * Since we have only two-level page tables, these are trivial - */ -#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, pmd) do { } while (0) -#define pgd_populate(mm,pmd,pte) BUG() - -extern pgd_t *get_pgd_slow(struct mm_struct *mm); -extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd); - -#define pgd_alloc(mm) get_pgd_slow(mm) -#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd) - -/* - * Allocate one PTE table. - * - * This actually allocates two hardware PTE tables, but we wrap this up - * into one table thus: - * - * +------------+ - * | h/w pt 0 | - * +------------+ - * | h/w pt 1 | - * +------------+ - * | Linux pt 0 | - * +------------+ - * | Linux pt 1 | - * +------------+ - */ -static inline pte_t * -pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr) -{ - pte_t *pte; - - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); - if (pte) { - clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE); - pte += PTRS_PER_PTE; - } - - return pte; -} - -static inline pgtable_t -pte_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - struct page *pte; - - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); - if (pte) { - void *page = page_address(pte); - clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE); - pgtable_page_ctor(pte); - } - - return pte; -} - -/* - * Free one PTE table. - */ -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - if (pte) { - pte -= PTRS_PER_PTE; - free_page((unsigned long)pte); - } -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - -static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval) -{ - pmdp[0] = __pmd(pmdval); - pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); - flush_pmd_entry(pmdp); -} - -/* - * Populate the pmdp entry with a pointer to the pte. This pmd is part - * of the mm address space. - * - * Ensure that we always set both PMD entries. - */ -static inline void -pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) -{ - unsigned long pte_ptr = (unsigned long)ptep; - - /* - * The pmd must be loaded with the physical - * address of the PTE table - */ - pte_ptr -= PTRS_PER_PTE * sizeof(void *); - __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE); -} - -static inline void -pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep) -{ - __pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -#endif /* CONFIG_MMU */ - -#endif diff --git a/include/asm-arm/pgtable-hwdef.h b/include/asm-arm/pgtable-hwdef.h deleted file mode 100644 index f3b5120c99f..00000000000 --- a/include/asm-arm/pgtable-hwdef.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * linux/include/asm-arm/pgtable-hwdef.h - * - * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGTABLE_HWDEF_H -#define _ASMARM_PGTABLE_HWDEF_H - -/* - * Hardware page table definitions. - * - * + Level 1 descriptor (PMD) - * - common - */ -#define PMD_TYPE_MASK (3 << 0) -#define PMD_TYPE_FAULT (0 << 0) -#define PMD_TYPE_TABLE (1 << 0) -#define PMD_TYPE_SECT (2 << 0) -#define PMD_BIT4 (1 << 4) -#define PMD_DOMAIN(x) ((x) << 5) -#define PMD_PROTECTION (1 << 9) /* v5 */ -/* - * - section - */ -#define PMD_SECT_BUFFERABLE (1 << 2) -#define PMD_SECT_CACHEABLE (1 << 3) -#define PMD_SECT_XN (1 << 4) /* v6 */ -#define PMD_SECT_AP_WRITE (1 << 10) -#define PMD_SECT_AP_READ (1 << 11) -#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */ -#define PMD_SECT_APX (1 << 15) /* v6 */ -#define PMD_SECT_S (1 << 16) /* v6 */ -#define PMD_SECT_nG (1 << 17) /* v6 */ -#define PMD_SECT_SUPER (1 << 18) /* v6 */ - -#define PMD_SECT_UNCACHED (0) -#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) -#define PMD_SECT_WT (PMD_SECT_CACHEABLE) -#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) -#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) - -/* - * - coarse table (not used) - */ - -/* - * + Level 2 descriptor (PTE) - * - common - */ -#define PTE_TYPE_MASK (3 << 0) -#define PTE_TYPE_FAULT (0 << 0) -#define PTE_TYPE_LARGE (1 << 0) -#define PTE_TYPE_SMALL (2 << 0) -#define PTE_TYPE_EXT (3 << 0) /* v5 */ -#define PTE_BUFFERABLE (1 << 2) -#define PTE_CACHEABLE (1 << 3) - -/* - * - extended small page/tiny page - */ -#define PTE_EXT_XN (1 << 0) /* v6 */ -#define PTE_EXT_AP_MASK (3 << 4) -#define PTE_EXT_AP0 (1 << 4) -#define PTE_EXT_AP1 (2 << 4) -#define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) -#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) -#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) -#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ -#define PTE_EXT_APX (1 << 9) /* v6 */ -#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */ -#define PTE_EXT_SHARED (1 << 10) /* v6 */ -#define PTE_EXT_NG (1 << 11) /* v6 */ - -/* - * - small page - */ -#define PTE_SMALL_AP_MASK (0xff << 4) -#define PTE_SMALL_AP_UNO_SRO (0x00 << 4) -#define PTE_SMALL_AP_UNO_SRW (0x55 << 4) -#define PTE_SMALL_AP_URO_SRW (0xaa << 4) -#define PTE_SMALL_AP_URW_SRW (0xff << 4) - -#endif diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h deleted file mode 100644 index 386fcc10a97..00000000000 --- a/include/asm-arm/pgtable-nommu.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * linux/include/asm-arm/pgtable-nommu.h - * - * Copyright (C) 1995-2002 Russell King - * Copyright (C) 2004 Hyok S. Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGTABLE_NOMMU_H -#define _ASMARM_PGTABLE_NOMMU_H - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -/* - * Trivial page table functions. - */ -#define pgd_present(pgd) (1) -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) -#define kern_addr_valid(addr) (1) -#define pmd_offset(a, b) ((void *)0) -/* FIXME */ -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PGDIR_SHIFT 21 - -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) -/* FIXME */ - -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) - -#define swapper_pg_dir ((pgd_t *) 0) - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - - -typedef pte_t *pte_addr_t; - -static inline int pte_file(pte_t pte) { return 0; } - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) - -/* - * Mark the prot value as uncacheable and unbufferable. - */ -#define pgprot_noncached(prot) __pgprot(0) -#define pgprot_writecombine(prot) __pgprot(0) - - -/* - * These would be in other places but having them here reduces the diffs. - */ -extern unsigned int kobjsize(const void *objp); - -/* - * No page table caches to initialise. - */ -#define pgtable_cache_init() do { } while (0) -#define io_remap_page_range remap_page_range -#define io_remap_pfn_range remap_pfn_range - - -/* - * All 32bit addresses are effectively valid for vmalloc... - * Sort of meaningless for non-VM targets. - */ -#define VMALLOC_START 0 -#define VMALLOC_END 0xffffffff - -#define FIRST_USER_ADDRESS (0) - -#include - -#else - -/* - * dummy tlb and user structures. - */ -#define v3_tlb_fns (0) -#define v4_tlb_fns (0) -#define v4wb_tlb_fns (0) -#define v4wbi_tlb_fns (0) -#define v6wbi_tlb_fns (0) -#define v7wbi_tlb_fns (0) - -#define v3_user_fns (0) -#define v4_user_fns (0) -#define v4_mc_user_fns (0) -#define v4wb_user_fns (0) -#define v4wt_user_fns (0) -#define v6_user_fns (0) -#define xscale_mc_user_fns (0) - -#endif /*__ASSEMBLY__*/ - -#endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h deleted file mode 100644 index 5571c13c3f3..00000000000 --- a/include/asm-arm/pgtable.h +++ /dev/null @@ -1,401 +0,0 @@ -/* - * linux/include/asm-arm/pgtable.h - * - * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGTABLE_H -#define _ASMARM_PGTABLE_H - -#include -#include - -#ifndef CONFIG_MMU - -#include "pgtable-nommu.h" - -#else - -#include -#include -#include - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * - * Note that platforms may override VMALLOC_START, but they must provide - * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space, - * which may not overlap IO space. - */ -#ifndef VMALLOC_START -#define VMALLOC_OFFSET (8*1024*1024) -#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#endif - -/* - * Hardware-wise, we have a two level page table structure, where the first - * level has 4096 entries, and the second level has 256 entries. Each entry - * is one 32-bit word. Most of the bits in the second level entry are used - * by hardware, and there aren't any "accessed" and "dirty" bits. - * - * Linux on the other hand has a three level page table structure, which can - * be wrapped to fit a two level page table structure easily - using the PGD - * and PTE only. However, Linux also expects one "PTE" table per page, and - * at least a "dirty" bit. - * - * Therefore, we tweak the implementation slightly - we tell Linux that we - * have 2048 entries in the first level, each of which is 8 bytes (iow, two - * hardware pointers to the second level.) The second level contains two - * hardware PTE tables arranged contiguously, followed by Linux versions - * which contain the state information Linux needs. We, therefore, end up - * with 512 entries in the "PTE" level. - * - * This leads to the page tables having the following layout: - * - * pgd pte - * | | - * +--------+ +0 - * | |-----> +------------+ +0 - * +- - - - + +4 | h/w pt 0 | - * | |-----> +------------+ +1024 - * +--------+ +8 | h/w pt 1 | - * | | +------------+ +2048 - * +- - - - + | Linux pt 0 | - * | | +------------+ +3072 - * +--------+ | Linux pt 1 | - * | | +------------+ +4096 - * - * See L_PTE_xxx below for definitions of bits in the "Linux pt", and - * PTE_xxx for definitions of bits appearing in the "h/w pt". - * - * PMD_xxx definitions refer to bits in the first level page table. - * - * The "dirty" bit is emulated by only granting hardware write permission - * iff the page is marked "writable" and "dirty" in the Linux PTE. This - * means that a write to a clean page will cause a permission fault, and - * the Linux MM layer will mark the page dirty via handle_pte_fault(). - * For the hardware to notice the permission change, the TLB entry must - * be flushed, and ptep_set_access_flags() does that for us. - * - * The "accessed" or "young" bit is emulated by a similar method; we only - * allow accesses to the page if the "young" bit is set. Accesses to the - * page will cause a fault, and handle_pte_fault() will set the young bit - * for us as long as the page is marked present in the corresponding Linux - * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is - * up to date. - * - * However, when the "young" bit is cleared, we deny access to the page - * by clearing the hardware PTE. Currently Linux does not flush the TLB - * for us in this case, which means the TLB will retain the transation - * until either the TLB entry is evicted under pressure, or a context - * switch which changes the user space mapping occurs. - */ -#define PTRS_PER_PTE 512 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 - -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PMD_SHIFT 21 -#define PGDIR_SHIFT 21 - -#define LIBRARY_TEXT_START 0x0c000000 - -#ifndef __ASSEMBLY__ -extern void __pte_error(const char *file, int line, unsigned long val); -extern void __pmd_error(const char *file, int line, unsigned long val); -extern void __pgd_error(const char *file, int line, unsigned long val); - -#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) -#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd)) -#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) -#endif /* !__ASSEMBLY__ */ - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * This is the lowest virtual address we can permit any user space - * mapping to be mapped at. This is particularly important for - * non-high vector CPUs. - */ -#define FIRST_USER_ADDRESS PAGE_SIZE - -#define FIRST_USER_PGD_NR 1 -#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR) - -/* - * section address mask and size definitions. - */ -#define SECTION_SHIFT 20 -#define SECTION_SIZE (1UL << SECTION_SHIFT) -#define SECTION_MASK (~(SECTION_SIZE-1)) - -/* - * ARMv6 supersection address mask and size definitions. - */ -#define SUPERSECTION_SHIFT 24 -#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) -#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) - -/* - * "Linux" PTE definitions. - * - * We keep two sets of PTEs - the hardware and the linux version. - * This allows greater flexibility in the way we map the Linux bits - * onto the hardware tables, and allows us to have YOUNG and DIRTY - * bits. - * - * The PTE table pointer refers to the hardware entries; the "Linux" - * entries are stored 1024 bytes below. - */ -#define L_PTE_PRESENT (1 << 0) -#define L_PTE_FILE (1 << 1) /* only when !PRESENT */ -#define L_PTE_YOUNG (1 << 1) -#define L_PTE_BUFFERABLE (1 << 2) /* matches PTE */ -#define L_PTE_CACHEABLE (1 << 3) /* matches PTE */ -#define L_PTE_USER (1 << 4) -#define L_PTE_WRITE (1 << 5) -#define L_PTE_EXEC (1 << 6) -#define L_PTE_DIRTY (1 << 7) -#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ - -#ifndef __ASSEMBLY__ - -/* - * The pgprot_* and protection_map entries will be fixed up in runtime - * to include the cachable and bufferable bits based on memory policy, - * as well as any architecture dependent bits like global/ASID and SMP - * shared mapping bits. - */ -#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE -#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC - -extern pgprot_t pgprot_user; -extern pgprot_t pgprot_kernel; - -#define PAGE_NONE pgprot_user -#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) -#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \ - L_PTE_WRITE) -#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) -#define PAGE_KERNEL pgprot_kernel - -#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT) -#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) -#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE) -#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) - -#endif /* __ASSEMBLY__ */ - -/* - * The table below defines the page protection levels that we insert into our - * Linux page table version. These get translated into the best that the - * architecture can perform. Note that on most ARM hardware: - * 1) We cannot do execute protection - * 2) If we could do execute protection, then read is implied - * 3) write implies read permissions - */ -#define __P000 __PAGE_NONE -#define __P001 __PAGE_READONLY -#define __P010 __PAGE_COPY -#define __P011 __PAGE_COPY -#define __P100 __PAGE_READONLY -#define __P101 __PAGE_READONLY -#define __P110 __PAGE_COPY -#define __P111 __PAGE_COPY - -#define __S000 __PAGE_NONE -#define __S001 __PAGE_READONLY -#define __S010 __PAGE_SHARED -#define __S011 __PAGE_SHARED -#define __S100 __PAGE_READONLY -#define __S101 __PAGE_READONLY -#define __S110 __PAGE_SHARED -#define __S111 __PAGE_SHARED - -#ifndef __ASSEMBLY__ -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern struct page *empty_zero_page; -#define ZERO_PAGE(vaddr) (empty_zero_page) - -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) - -#define pte_none(pte) (!pte_val(pte)) -#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) -#define pte_page(pte) (pfn_to_page(pte_pfn(pte))) -#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) - -#define set_pte_at(mm,addr,ptep,pteval) do { \ - set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ - } while (0) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_special(pte) (0) - -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - -#define PTE_BIT_FUNC(fn,op) \ -static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } - -PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE); -PTE_BIT_FUNC(mkwrite, |= L_PTE_WRITE); -PTE_BIT_FUNC(mkclean, &= ~L_PTE_DIRTY); -PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY); -PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG); -PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG); - -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -/* - * Mark the prot value as uncacheable and unbufferable. - */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE)) -#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_present(pmd) (pmd_val(pmd)) -#define pmd_bad(pmd) (pmd_val(pmd) & 2) - -#define copy_pmd(pmdpd,pmdps) \ - do { \ - pmdpd[0] = pmdps[0]; \ - pmdpd[1] = pmdps[1]; \ - flush_pmd_entry(pmdpd); \ - } while (0) - -#define pmd_clear(pmdp) \ - do { \ - pmdp[0] = __pmd(0); \ - pmdp[1] = __pmd(0); \ - clean_pmd_entry(pmdp); \ - } while (0) - -static inline pte_t *pmd_page_vaddr(pmd_t pmd) -{ - unsigned long ptr; - - ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1); - ptr += PTRS_PER_PTE * sizeof(void *); - - return __va(ptr); -} - -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) - -/* - * Permanent address of a page. We never have highmem, so this is trivial. - */ -#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_present(pgd) (1) -#define pgd_clear(pgdp) do { } while (0) -#define set_pgd(pgd,pgdp) do { } while (0) - -/* to find an entry in a page-table-directory */ -#define pgd_index(addr) ((addr) >> PGDIR_SHIFT) - -#define pgd_offset(mm, addr) ((mm)->pgd+pgd_index(addr)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(addr) pgd_offset(&init_mm, addr) - -/* Find an entry in the second-level page table.. */ -#define pmd_offset(dir, addr) ((pmd_t *)(dir)) - -/* Find an entry in the third-level page table.. */ -#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER; - pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); - return pte; -} - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -/* Encode and decode a swap entry. - * - * We support up to 32GB of swap on 4k machines - */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -/* FIXME: this is not correct */ -#define kern_addr_valid(addr) (1) - -#include - -/* - * We provide our own arch_get_unmapped_area to cope with VIPT caches. - */ -#define HAVE_ARCH_UNMAPPED_AREA - -/* - * remap a physical page `pfn' of size `size' with page protection `prot' - * into virtual address `from' - */ -#define io_remap_pfn_range(vma,from,pfn,size,prot) \ - remap_pfn_range(vma, from, pfn, size, prot) - -#define pgtable_cache_init() do { } while (0) - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_MMU */ - -#endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm/poll.h b/include/asm-arm/poll.h deleted file mode 100644 index c98509d3149..00000000000 --- a/include/asm-arm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/posix_types.h b/include/asm-arm/posix_types.h deleted file mode 100644 index c37379dadcb..00000000000 --- a/include/asm-arm/posix_types.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * linux/include/asm-arm/posix_types.h - * - * Copyright (C) 1996-1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - */ -#ifndef __ARCH_ARM_POSIX_TYPES_H -#define __ARCH_ARM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(fd, fdsetp) \ - (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31))) - -#undef __FD_CLR -#define __FD_CLR(fd, fdsetp) \ - (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31))) - -#undef __FD_ISSET -#define __FD_ISSET(fd, fdsetp) \ - ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) \ - (memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp)))) - -#endif - -#endif diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h deleted file mode 100644 index 75ec760f4c7..00000000000 --- a/include/asm-arm/proc-fns.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * linux/include/asm-arm/proc-fns.h - * - * Copyright (C) 1997-1999 Russell King - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PROCFNS_H -#define __ASM_PROCFNS_H - -#ifdef __KERNEL__ - - -/* - * Work out if we need multiple CPU support - */ -#undef MULTI_CPU -#undef CPU_NAME - -/* - * CPU_NAME - the prefix for CPU related functions - */ - -#ifdef CONFIG_CPU_32 -# ifdef CONFIG_CPU_ARM610 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm6 -# endif -# endif -# ifdef CONFIG_CPU_ARM7TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7tdmi -# endif -# endif -# ifdef CONFIG_CPU_ARM710 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7 -# endif -# endif -# ifdef CONFIG_CPU_ARM720T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm720 -# endif -# endif -# ifdef CONFIG_CPU_ARM740T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm740 -# endif -# endif -# ifdef CONFIG_CPU_ARM9TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm9tdmi -# endif -# endif -# ifdef CONFIG_CPU_ARM920T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm920 -# endif -# endif -# ifdef CONFIG_CPU_ARM922T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm922 -# endif -# endif -# ifdef CONFIG_CPU_ARM925T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm925 -# endif -# endif -# ifdef CONFIG_CPU_ARM926T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm926 -# endif -# endif -# ifdef CONFIG_CPU_ARM940T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm940 -# endif -# endif -# ifdef CONFIG_CPU_ARM946E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm946 -# endif -# endif -# ifdef CONFIG_CPU_SA110 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa110 -# endif -# endif -# ifdef CONFIG_CPU_SA1100 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa1100 -# endif -# endif -# ifdef CONFIG_CPU_ARM1020 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020 -# endif -# endif -# ifdef CONFIG_CPU_ARM1020E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020e -# endif -# endif -# ifdef CONFIG_CPU_ARM1022 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1022 -# endif -# endif -# ifdef CONFIG_CPU_ARM1026 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1026 -# endif -# endif -# ifdef CONFIG_CPU_XSCALE -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xscale -# endif -# endif -# ifdef CONFIG_CPU_XSC3 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xsc3 -# endif -# endif -# ifdef CONFIG_CPU_FEROCEON -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_feroceon -# endif -# endif -# ifdef CONFIG_CPU_V6 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v6 -# endif -# endif -# ifdef CONFIG_CPU_V7 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v7 -# endif -# endif -#endif - -#ifndef __ASSEMBLY__ - -#ifndef MULTI_CPU -#include -#else -#include -#endif - -#include - -#ifdef CONFIG_MMU - -#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm) - -#define cpu_get_pgd() \ - ({ \ - unsigned long pg; \ - __asm__("mrc p15, 0, %0, c2, c0, 0" \ - : "=r" (pg) : : "cc"); \ - pg &= ~0x3fff; \ - (pgd_t *)phys_to_virt(pg); \ - }) - -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* __ASM_PROCFNS_H */ diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h deleted file mode 100644 index bd8029e8dc6..00000000000 --- a/include/asm-arm/processor.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * linux/include/asm-arm/processor.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_PROCESSOR_H -#define __ASM_ARM_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#ifdef __KERNEL__ - -#include -#include - -#ifdef __KERNEL__ -#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \ - TASK_SIZE : TASK_SIZE_26) -#define STACK_TOP_MAX TASK_SIZE -#endif - -union debug_insn { - u32 arm; - u16 thumb; -}; - -struct debug_entry { - u32 address; - union debug_insn insn; -}; - -struct debug_info { - int nsaved; - struct debug_entry bp[2]; -}; - -struct thread_struct { - /* fault info */ - unsigned long address; - unsigned long trap_no; - unsigned long error_code; - /* debugging */ - struct debug_info debug; -}; - -#define INIT_THREAD { } - -#ifdef CONFIG_MMU -#define nommu_start_thread(regs) do { } while (0) -#else -#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data -#endif - -#define start_thread(regs,pc,sp) \ -({ \ - unsigned long *stack = (unsigned long *)sp; \ - set_fs(USER_DS); \ - memzero(regs->uregs, sizeof(regs->uregs)); \ - if (current->personality & ADDR_LIMIT_32BIT) \ - regs->ARM_cpsr = USR_MODE; \ - else \ - regs->ARM_cpsr = USR26_MODE; \ - if (elf_hwcap & HWCAP_THUMB && pc & 1) \ - regs->ARM_cpsr |= PSR_T_BIT; \ - regs->ARM_pc = pc & ~1; /* pc */ \ - regs->ARM_sp = sp; /* sp */ \ - regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ - regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ - regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ - nommu_start_thread(regs); \ -}) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -unsigned long get_wchan(struct task_struct *p); - -#define cpu_relax() barrier() - -/* - * Create a new kernel thread - */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -#define task_pt_regs(p) \ - ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) - -#define KSTK_EIP(tsk) task_pt_regs(tsk)->ARM_pc -#define KSTK_ESP(tsk) task_pt_regs(tsk)->ARM_sp - -/* - * Prefetching support - only ARMv5. - */ -#if __LINUX_ARM_ARCH__ >= 5 - -#define ARCH_HAS_PREFETCH -static inline void prefetch(const void *ptr) -{ - __asm__ __volatile__( - "pld\t%0" - : - : "o" (*(char *)ptr) - : "cc"); -} - -#define ARCH_HAS_PREFETCHW -#define prefetchw(ptr) prefetch(ptr) - -#define ARCH_HAS_SPINLOCK_PREFETCH -#define spin_lock_prefetch(x) do { } while (0) - -#endif - -#endif - -#endif /* __ASM_ARM_PROCESSOR_H */ diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h deleted file mode 100644 index 4d3c685075e..00000000000 --- a/include/asm-arm/procinfo.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/procinfo.h - * - * Copyright (C) 1996-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PROCINFO_H -#define __ASM_PROCINFO_H - -#ifdef __KERNEL__ - -struct cpu_tlb_fns; -struct cpu_user_fns; -struct cpu_cache_fns; -struct processor; - -/* - * Note! struct processor is always defined if we're - * using MULTI_CPU, otherwise this entry is unused, - * but still exists. - * - * NOTE! The following structure is defined by assembly - * language, NOT C code. For more information, check: - * arch/arm/mm/proc-*.S and arch/arm/kernel/head.S - */ -struct proc_info_list { - unsigned int cpu_val; - unsigned int cpu_mask; - unsigned long __cpu_mm_mmu_flags; /* used by head.S */ - unsigned long __cpu_io_mmu_flags; /* used by head.S */ - unsigned long __cpu_flush; /* used by head.S */ - const char *arch_name; - const char *elf_name; - unsigned int elf_hwcap; - const char *cpu_name; - struct processor *proc; - struct cpu_tlb_fns *tlb; - struct cpu_user_fns *user; - struct cpu_cache_fns *cache; -}; - -#else /* __KERNEL__ */ -#include -#warning "Please include asm/elf.h instead" -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h deleted file mode 100644 index 8382b7510f9..00000000000 --- a/include/asm-arm/ptrace.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * linux/include/asm-arm/ptrace.h - * - * Copyright (C) 1996-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_PTRACE_H -#define __ASM_ARM_PTRACE_H - -#include - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -/* PTRACE_ATTACH is 16 */ -/* PTRACE_DETACH is 17 */ -#define PTRACE_GETWMMXREGS 18 -#define PTRACE_SETWMMXREGS 19 -/* 20 is unused */ -#define PTRACE_OLDSETOPTIONS 21 -#define PTRACE_GET_THREAD_AREA 22 -#define PTRACE_SET_SYSCALL 23 -/* PTRACE_SYSCALL is 24 */ -#define PTRACE_GETCRUNCHREGS 25 -#define PTRACE_SETCRUNCHREGS 26 - -/* - * PSR bits - */ -#define USR26_MODE 0x00000000 -#define FIQ26_MODE 0x00000001 -#define IRQ26_MODE 0x00000002 -#define SVC26_MODE 0x00000003 -#define USR_MODE 0x00000010 -#define FIQ_MODE 0x00000011 -#define IRQ_MODE 0x00000012 -#define SVC_MODE 0x00000013 -#define ABT_MODE 0x00000017 -#define UND_MODE 0x0000001b -#define SYSTEM_MODE 0x0000001f -#define MODE32_BIT 0x00000010 -#define MODE_MASK 0x0000001f -#define PSR_T_BIT 0x00000020 -#define PSR_F_BIT 0x00000040 -#define PSR_I_BIT 0x00000080 -#define PSR_A_BIT 0x00000100 -#define PSR_J_BIT 0x01000000 -#define PSR_Q_BIT 0x08000000 -#define PSR_V_BIT 0x10000000 -#define PSR_C_BIT 0x20000000 -#define PSR_Z_BIT 0x40000000 -#define PSR_N_BIT 0x80000000 -#define PCMASK 0 - -/* - * Groups of PSR bits - */ -#define PSR_f 0xff000000 /* Flags */ -#define PSR_s 0x00ff0000 /* Status */ -#define PSR_x 0x0000ff00 /* Extension */ -#define PSR_c 0x000000ff /* Control */ - -#ifndef __ASSEMBLY__ - -/* - * This struct defines the way the registers are stored on the - * stack during a system call. Note that sizeof(struct pt_regs) - * has to be a multiple of 8. - */ -struct pt_regs { - long uregs[18]; -}; - -#define ARM_cpsr uregs[16] -#define ARM_pc uregs[15] -#define ARM_lr uregs[14] -#define ARM_sp uregs[13] -#define ARM_ip uregs[12] -#define ARM_fp uregs[11] -#define ARM_r10 uregs[10] -#define ARM_r9 uregs[9] -#define ARM_r8 uregs[8] -#define ARM_r7 uregs[7] -#define ARM_r6 uregs[6] -#define ARM_r5 uregs[5] -#define ARM_r4 uregs[4] -#define ARM_r3 uregs[3] -#define ARM_r2 uregs[2] -#define ARM_r1 uregs[1] -#define ARM_r0 uregs[0] -#define ARM_ORIG_r0 uregs[17] - -#ifdef __KERNEL__ - -#define user_mode(regs) \ - (((regs)->ARM_cpsr & 0xf) == 0) - -#ifdef CONFIG_ARM_THUMB -#define thumb_mode(regs) \ - (((regs)->ARM_cpsr & PSR_T_BIT)) -#else -#define thumb_mode(regs) (0) -#endif - -#define isa_mode(regs) \ - ((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \ - (((regs)->ARM_cpsr & PSR_T_BIT) >> 5)) - -#define processor_mode(regs) \ - ((regs)->ARM_cpsr & MODE_MASK) - -#define interrupts_enabled(regs) \ - (!((regs)->ARM_cpsr & PSR_I_BIT)) - -#define fast_interrupts_enabled(regs) \ - (!((regs)->ARM_cpsr & PSR_F_BIT)) - -/* Are the current registers suitable for user mode? - * (used to maintain security in signal handlers) - */ -static inline int valid_user_regs(struct pt_regs *regs) -{ - if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) { - regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT); - return 1; - } - - /* - * Force CPSR to something logical... - */ - regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT; - if (!(elf_hwcap & HWCAP_26BIT)) - regs->ARM_cpsr |= USR_MODE; - - return 0; -} - -#define pc_pointer(v) \ - ((v) & ~PCMASK) - -#define instruction_pointer(regs) \ - (pc_pointer((regs)->ARM_pc)) - -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - -#define predicate(x) ((x) & 0xf0000000) -#define PREDICATE_ALWAYS 0xe0000000 - -#endif /* __KERNEL__ */ - -#endif /* __ASSEMBLY__ */ - -#endif - diff --git a/include/asm-arm/resource.h b/include/asm-arm/resource.h deleted file mode 100644 index 734b581b5b6..00000000000 --- a/include/asm-arm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_RESOURCE_H -#define _ARM_RESOURCE_H - -#include - -#endif diff --git a/include/asm-arm/scatterlist.h b/include/asm-arm/scatterlist.h deleted file mode 100644 index ca0a37d0340..00000000000 --- a/include/asm-arm/scatterlist.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASMARM_SCATTERLIST_H -#define _ASMARM_SCATTERLIST_H - -#include -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* buffer offset */ - dma_addr_t dma_address; /* dma address */ - unsigned int length; /* length */ -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* _ASMARM_SCATTERLIST_H */ diff --git a/include/asm-arm/sections.h b/include/asm-arm/sections.h deleted file mode 100644 index 2b8c5160388..00000000000 --- a/include/asm-arm/sections.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/segment.h b/include/asm-arm/segment.h deleted file mode 100644 index 9e24c21f630..00000000000 --- a/include/asm-arm/segment.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_ARM_SEGMENT_H -#define __ASM_ARM_SEGMENT_H - -#define __KERNEL_CS 0x0 -#define __KERNEL_DS 0x0 - -#define __USER_CS 0x1 -#define __USER_DS 0x1 - -#endif /* __ASM_ARM_SEGMENT_H */ - diff --git a/include/asm-arm/sembuf.h b/include/asm-arm/sembuf.h deleted file mode 100644 index 1c028395428..00000000000 --- a/include/asm-arm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASMARM_SEMBUF_H -#define _ASMARM_SEMBUF_H - -/* - * The semid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SEMBUF_H */ diff --git a/include/asm-arm/serial.h b/include/asm-arm/serial.h deleted file mode 100644 index 015b262dc14..00000000000 --- a/include/asm-arm/serial.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/serial.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 15-10-1996 RMK Created - */ - -#ifndef __ASM_SERIAL_H -#define __ASM_SERIAL_H - -#define BASE_BAUD (1843200 / 16) - -#endif diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h deleted file mode 100644 index 7bbf105463f..00000000000 --- a/include/asm-arm/setup.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * linux/include/asm/setup.h - * - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Structure passed to kernel to tell it about the - * hardware it's running on. See Documentation/arm/Setup - * for more info. - */ -#ifndef __ASMARM_SETUP_H -#define __ASMARM_SETUP_H - -#include - -#define COMMAND_LINE_SIZE 1024 - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - __u32 size; - __u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - __u32 flags; /* bit 0 = read-only */ - __u32 pagesize; - __u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 - -struct tag_mem32 { - __u32 size; - __u32 start; /* physical start address */ -}; - -/* VGA text type displays */ -#define ATAG_VIDEOTEXT 0x54410003 - -struct tag_videotext { - __u8 x; - __u8 y; - __u16 video_page; - __u8 video_mode; - __u8 video_cols; - __u16 video_ega_bx; - __u8 video_lines; - __u8 video_isvga; - __u16 video_points; -}; - -/* describes how the ramdisk will be used in kernel */ -#define ATAG_RAMDISK 0x54410004 - -struct tag_ramdisk { - __u32 flags; /* bit 0 = load, bit 1 = prompt */ - __u32 size; /* decompressed ramdisk size in _kilo_ bytes */ - __u32 start; /* starting block of floppy-based RAM disk image */ -}; - -/* describes where the compressed ramdisk image lives (virtual address) */ -/* - * this one accidentally used virtual addresses - as such, - * it's deprecated. - */ -#define ATAG_INITRD 0x54410005 - -/* describes where the compressed ramdisk image lives (physical address) */ -#define ATAG_INITRD2 0x54420005 - -struct tag_initrd { - __u32 start; /* physical start address */ - __u32 size; /* size of compressed ramdisk image in bytes */ -}; - -/* board serial number. "64 bits should be enough for everybody" */ -#define ATAG_SERIAL 0x54410006 - -struct tag_serialnr { - __u32 low; - __u32 high; -}; - -/* board revision */ -#define ATAG_REVISION 0x54410007 - -struct tag_revision { - __u32 rev; -}; - -/* initial values for vesafb-type framebuffers. see struct screen_info - * in include/linux/tty.h - */ -#define ATAG_VIDEOLFB 0x54410008 - -struct tag_videolfb { - __u16 lfb_width; - __u16 lfb_height; - __u16 lfb_depth; - __u16 lfb_linelength; - __u32 lfb_base; - __u32 lfb_size; - __u8 red_size; - __u8 red_pos; - __u8 green_size; - __u8 green_pos; - __u8 blue_size; - __u8 blue_pos; - __u8 rsvd_size; - __u8 rsvd_pos; -}; - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410009 - -struct tag_cmdline { - char cmdline[1]; /* this is the minimum size */ -}; - -/* acorn RiscPC specific information */ -#define ATAG_ACORN 0x41000101 - -struct tag_acorn { - __u32 memc_control_reg; - __u32 vram_pages; - __u8 sounddefault; - __u8 adfsdrives; -}; - -/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ -#define ATAG_MEMCLK 0x41000402 - -struct tag_memclk { - __u32 fmemclk; -}; - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem32 mem; - struct tag_videotext videotext; - struct tag_ramdisk ramdisk; - struct tag_initrd initrd; - struct tag_serialnr serialnr; - struct tag_revision revision; - struct tag_videolfb videolfb; - struct tag_cmdline cmdline; - - /* - * Acorn specific - */ - struct tag_acorn acorn; - - /* - * DC21285 specific - */ - struct tag_memclk memclk; - } u; -}; - -struct tagtable { - __u32 tag; - int (*parse)(const struct tag *); -}; - -#define tag_member_present(tag,member) \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(t,base) \ - for (t = base; t->hdr.size; t = tag_next(t)) - -#ifdef __KERNEL__ - -#define __tag __used __attribute__((__section__(".taglist.init"))) -#define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } - -/* - * Memory map description - */ -#ifdef CONFIG_ARCH_LH7A40X -# define NR_BANKS 16 -#else -# define NR_BANKS 8 -#endif - -struct membank { - unsigned long start; - unsigned long size; - int node; -}; - -struct meminfo { - int nr_banks; - struct membank bank[NR_BANKS]; -}; - -/* - * Early command line parameters. - */ -struct early_params { - const char *arg; - void (*fn)(char **p); -}; - -#define __early_param(name,fn) \ -static struct early_params __early_##fn __used \ -__attribute__((__section__(".early_param.init"))) = { name, fn } - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-arm/shmbuf.h b/include/asm-arm/shmbuf.h deleted file mode 100644 index 2e5c67ba1c9..00000000000 --- a/include/asm-arm/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_SHMBUF_H -#define _ASMARM_SHMBUF_H - -/* - * The shmid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SHMBUF_H */ diff --git a/include/asm-arm/shmparam.h b/include/asm-arm/shmparam.h deleted file mode 100644 index a5223b3a9bf..00000000000 --- a/include/asm-arm/shmparam.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASMARM_SHMPARAM_H -#define _ASMARM_SHMPARAM_H - -/* - * This should be the size of the virtually indexed cache/ways, - * or page size, whichever is greater since the cache aliases - * every size/ways bytes. - */ -#define SHMLBA (4 * PAGE_SIZE) /* attach addr a multiple of this */ - -/* - * Enforce SHMLBA in shmat - */ -#define __ARCH_FORCE_SHMLBA - -#endif /* _ASMARM_SHMPARAM_H */ diff --git a/include/asm-arm/sigcontext.h b/include/asm-arm/sigcontext.h deleted file mode 100644 index fc0b80b6a6f..00000000000 --- a/include/asm-arm/sigcontext.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASMARM_SIGCONTEXT_H -#define _ASMARM_SIGCONTEXT_H - -/* - * Signal context structure - contains all info to do with the state - * before the signal handler was invoked. Note: only add new entries - * to the end of the structure. - */ -struct sigcontext { - unsigned long trap_no; - unsigned long error_code; - unsigned long oldmask; - unsigned long arm_r0; - unsigned long arm_r1; - unsigned long arm_r2; - unsigned long arm_r3; - unsigned long arm_r4; - unsigned long arm_r5; - unsigned long arm_r6; - unsigned long arm_r7; - unsigned long arm_r8; - unsigned long arm_r9; - unsigned long arm_r10; - unsigned long arm_fp; - unsigned long arm_ip; - unsigned long arm_sp; - unsigned long arm_lr; - unsigned long arm_pc; - unsigned long arm_cpsr; - unsigned long fault_address; -}; - - -#endif diff --git a/include/asm-arm/siginfo.h b/include/asm-arm/siginfo.h deleted file mode 100644 index 5e21852e603..00000000000 --- a/include/asm-arm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASMARM_SIGINFO_H -#define _ASMARM_SIGINFO_H - -#include - -#endif diff --git a/include/asm-arm/signal.h b/include/asm-arm/signal.h deleted file mode 100644 index d0fb487aba4..00000000000 --- a/include/asm-arm/signal.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef _ASMARM_SIGNAL_H -#define _ASMARM_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -#define SIGSWI 32 - -/* - * SA_FLAGS values: - * - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_SIGINFO deliver the signal with SIGINFO structs - * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task - * is running in 26-bit. - * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NODEFER prevents the current signal from being masked in the handler. - * SA_RESETHAND clears the handler when the signal is delivered. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_THIRTYTWO 0x02000000 -#define SA_RESTORER 0x04000000 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include -#define ptrace_signal_deliver(regs, cookie) do { } while (0) -#endif - -#endif diff --git a/include/asm-arm/sizes.h b/include/asm-arm/sizes.h deleted file mode 100644 index 503843db156..00000000000 --- a/include/asm-arm/sizes.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_16 0x00000010 -#define SZ_256 0x00000100 -#define SZ_512 0x00000200 - -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif - -/* END */ diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h deleted file mode 100644 index 7fffa2404b8..00000000000 --- a/include/asm-arm/smp.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/include/asm-arm/smp.h - * - * Copyright (C) 2004-2005 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_SMP_H -#define __ASM_ARM_SMP_H - -#include -#include -#include - -#include - -#ifndef CONFIG_SMP -# error " included in non-SMP build" -#endif - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -/* - * at the moment, there's not a big penalty for changing CPUs - * (the >big< penalty is running SMP in the first place) - */ -#define PROC_CHANGE_PENALTY 15 - -struct seq_file; - -/* - * generate IPI list text - */ -extern void show_ipi_list(struct seq_file *p); - -/* - * Called from assembly code, this handles an IPI. - */ -asmlinkage void do_IPI(struct pt_regs *regs); - -/* - * Setup the SMP cpu_possible_map - */ -extern void smp_init_cpus(void); - -/* - * Move global data into per-processor storage. - */ -extern void smp_store_cpu_info(unsigned int cpuid); - -/* - * Raise an IPI cross call on CPUs in callmap. - */ -extern void smp_cross_call(cpumask_t callmap); - -/* - * Broadcast a timer interrupt to the other CPUs. - */ -extern void smp_send_timer(void); - -/* - * Broadcast a clock event to other CPUs. - */ -extern void smp_timer_broadcast(cpumask_t mask); - -/* - * Boot a secondary CPU, and assign it the specified idle task. - * This also gives us the initial stack to use for this CPU. - */ -extern int boot_secondary(unsigned int cpu, struct task_struct *); - -/* - * Called from platform specific assembly code, this is the - * secondary CPU entry point. - */ -asmlinkage void secondary_start_kernel(void); - -/* - * Perform platform specific initialisation of the specified CPU. - */ -extern void platform_secondary_init(unsigned int cpu); - -/* - * Initial data for bringing up a secondary CPU. - */ -struct secondary_data { - unsigned long pgdir; - void *stack; -}; -extern struct secondary_data secondary_data; - -extern int __cpu_disable(void); -extern int mach_cpu_disable(unsigned int cpu); - -extern void __cpu_die(unsigned int cpu); -extern void cpu_die(void); - -extern void platform_cpu_die(unsigned int cpu); -extern int platform_cpu_kill(unsigned int cpu); -extern void platform_cpu_enable(unsigned int cpu); - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -/* - * Local timer interrupt handling function (can be IPI'ed). - */ -extern void local_timer_interrupt(void); - -#ifdef CONFIG_LOCAL_TIMERS - -/* - * Stop a local timer interrupt. - */ -extern void local_timer_stop(unsigned int cpu); - -/* - * Platform provides this to acknowledge a local timer IRQ - */ -extern int local_timer_ack(void); - -#else - -static inline void local_timer_stop(unsigned int cpu) -{ -} - -#endif - -/* - * Setup a local timer interrupt for a CPU. - */ -extern void local_timer_setup(unsigned int cpu); - -/* - * show local interrupt info - */ -extern void show_local_irqs(struct seq_file *); - -/* - * Called from assembly, this is the local timer IRQ handler - */ -asmlinkage void do_local_timer(struct pt_regs *); - -#endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/include/asm-arm/socket.h b/include/asm-arm/socket.h deleted file mode 100644 index 6817be9573a..00000000000 --- a/include/asm-arm/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASMARM_SOCKET_H -#define _ASMARM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-arm/sockios.h b/include/asm-arm/sockios.h deleted file mode 100644 index a2588a2512d..00000000000 --- a/include/asm-arm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_ARM_SOCKIOS_H -#define __ARCH_ARM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/include/asm-arm/sparsemem.h b/include/asm-arm/sparsemem.h deleted file mode 100644 index 277158191a0..00000000000 --- a/include/asm-arm/sparsemem.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef ASMARM_SPARSEMEM_H -#define ASMARM_SPARSEMEM_H - -#include - -#define MAX_PHYSADDR_BITS 32 -#define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS - -#endif diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h deleted file mode 100644 index 2b41ebbfa7f..00000000000 --- a/include/asm-arm/spinlock.h +++ /dev/null @@ -1,224 +0,0 @@ -#ifndef __ASM_SPINLOCK_H -#define __ASM_SPINLOCK_H - -#if __LINUX_ARM_ARCH__ < 6 -#error SMP not supported on pre-ARMv6 CPUs -#endif - -/* - * ARMv6 Spin-locking. - * - * We exclusively read the old value. If it is zero, we may have - * won the lock, so we try exclusively storing it. A memory barrier - * is required after we get a lock, and before we release it, because - * V6 CPUs are assumed to have weakly ordered memory. - * - * Unlocked value: 0 - * Locked value: 1 - */ - -#define __raw_spin_is_locked(x) ((x)->lock != 0) -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) - -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - unsigned long tmp; - - __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" -#ifdef CONFIG_CPU_32v6K -" wfene\n" -#endif -" strexeq %0, %2, [%1]\n" -" teqeq %0, #0\n" -" bne 1b" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) - : "cc"); - - smp_mb(); -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - unsigned long tmp; - - __asm__ __volatile__( -" ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) - : "cc"); - - if (tmp == 0) { - smp_mb(); - return 1; - } else { - return 0; - } -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - smp_mb(); - - __asm__ __volatile__( -" str %1, [%0]\n" -#ifdef CONFIG_CPU_32v6K -" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */ -" sev" -#endif - : - : "r" (&lock->lock), "r" (0) - : "cc"); -} - -/* - * RWLOCKS - * - * - * Write locks are easy - we just set bit 31. When unlocking, we can - * just write zero since the lock is exclusively held. - */ - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" -#ifdef CONFIG_CPU_32v6K -" wfene\n" -#endif -" strexeq %0, %2, [%1]\n" -" teq %0, #0\n" -" bne 1b" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc"); - - smp_mb(); -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc"); - - if (tmp == 0) { - smp_mb(); - return 1; - } else { - return 0; - } -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - smp_mb(); - - __asm__ __volatile__( - "str %1, [%0]\n" -#ifdef CONFIG_CPU_32v6K -" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */ -" sev\n" -#endif - : - : "r" (&rw->lock), "r" (0) - : "cc"); -} - -/* write_can_lock - would write_trylock() succeed? */ -#define __raw_write_can_lock(x) ((x)->lock == 0) - -/* - * Read locks are a bit more hairy: - * - Exclusively load the lock value. - * - Increment it. - * - Store new lock value if positive, and we still own this location. - * If the value is negative, we've already failed. - * - If we failed to store the value, we want a negative result. - * - If we failed, try again. - * Unlocking is similarly hairy. We may have multiple read locks - * currently active. However, we know we won't have any write - * locks. - */ -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - unsigned long tmp, tmp2; - - __asm__ __volatile__( -"1: ldrex %0, [%2]\n" -" adds %0, %0, #1\n" -" strexpl %1, %0, [%2]\n" -#ifdef CONFIG_CPU_32v6K -" wfemi\n" -#endif -" rsbpls %0, %1, #0\n" -" bmi 1b" - : "=&r" (tmp), "=&r" (tmp2) - : "r" (&rw->lock) - : "cc"); - - smp_mb(); -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - unsigned long tmp, tmp2; - - smp_mb(); - - __asm__ __volatile__( -"1: ldrex %0, [%2]\n" -" sub %0, %0, #1\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" -#ifdef CONFIG_CPU_32v6K -"\n cmp %0, #0\n" -" mcreq p15, 0, %0, c7, c10, 4\n" -" seveq" -#endif - : "=&r" (tmp), "=&r" (tmp2) - : "r" (&rw->lock) - : "cc"); -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp, tmp2 = 1; - - __asm__ __volatile__( -"1: ldrex %0, [%2]\n" -" adds %0, %0, #1\n" -" strexpl %1, %0, [%2]\n" - : "=&r" (tmp), "+r" (tmp2) - : "r" (&rw->lock) - : "cc"); - - smp_mb(); - return tmp2 == 0; -} - -/* read_can_lock - would read_trylock() succeed? */ -#define __raw_read_can_lock(x) ((x)->lock < 0x80000000) - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-arm/spinlock_types.h b/include/asm-arm/spinlock_types.h deleted file mode 100644 index 43e83f6d2ee..00000000000 --- a/include/asm-arm/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SPINLOCK_TYPES_H -#define __ASM_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile unsigned int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-arm/stat.h b/include/asm-arm/stat.h deleted file mode 100644 index 42c0c13999d..00000000000 --- a/include/asm-arm/stat.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _ASMARM_STAT_H -#define _ASMARM_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#define STAT_HAVE_NSEC - -struct stat { -#if defined(__ARMEB__) - unsigned short st_dev; - unsigned short __pad1; -#else - unsigned long st_dev; -#endif - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; -#if defined(__ARMEB__) - unsigned short st_rdev; - unsigned short __pad2; -#else - unsigned long st_rdev; -#endif - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - * Note: The kernel zero's the padded region because glibc might read them - * in the hope that the kernel has stretched to using larger sizes. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#endif diff --git a/include/asm-arm/statfs.h b/include/asm-arm/statfs.h deleted file mode 100644 index a02e6a8c3d7..00000000000 --- a/include/asm-arm/statfs.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_STATFS_H -#define _ASMARM_STATFS_H - -#ifndef __KERNEL_STRICT_NAMES -# include -typedef __kernel_fsid_t fsid_t; -#endif - -struct statfs { - __u32 f_type; - __u32 f_bsize; - __u32 f_blocks; - __u32 f_bfree; - __u32 f_bavail; - __u32 f_files; - __u32 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -}; - -/* - * With EABI there is 4 bytes of padding added to this structure. - * Let's pack it so the padding goes away to simplify dual ABI support. - * Note that user space does NOT have to pack this structure. - */ -struct statfs64 { - __u32 f_type; - __u32 f_bsize; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_bavail; - __u64 f_files; - __u64 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -} __attribute__ ((packed,aligned(4))); - -#endif diff --git a/include/asm-arm/string.h b/include/asm-arm/string.h deleted file mode 100644 index e50c4a39b69..00000000000 --- a/include/asm-arm/string.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_ARM_STRING_H -#define __ASM_ARM_STRING_H - -/* - * We don't do inline string functions, since the - * optimised inline asm versions are not small. - */ - -#define __HAVE_ARCH_STRRCHR -extern char * strrchr(const char * s, int c); - -#define __HAVE_ARCH_STRCHR -extern char * strchr(const char * s, int c); - -#define __HAVE_ARCH_MEMCPY -extern void * memcpy(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMMOVE -extern void * memmove(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMCHR -extern void * memchr(const void *, int, __kernel_size_t); - -#define __HAVE_ARCH_MEMZERO -#define __HAVE_ARCH_MEMSET -extern void * memset(void *, int, __kernel_size_t); - -extern void __memzero(void *ptr, __kernel_size_t n); - -#define memset(p,v,n) \ - ({ \ - void *__p = (p); size_t __n = n; \ - if ((__n) != 0) { \ - if (__builtin_constant_p((v)) && (v) == 0) \ - __memzero((__p),(__n)); \ - else \ - memset((__p),(v),(__n)); \ - } \ - (__p); \ - }) - -#define memzero(p,n) \ - ({ \ - void *__p = (p); size_t __n = n; \ - if ((__n) != 0) \ - __memzero((__p),(__n)); \ - (__p); \ - }) - -#endif diff --git a/include/asm-arm/suspend.h b/include/asm-arm/suspend.h deleted file mode 100644 index cf0d0bdee74..00000000000 --- a/include/asm-arm/suspend.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASMARM_SUSPEND_H -#define _ASMARM_SUSPEND_H - -#endif diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h deleted file mode 100644 index 514af792a59..00000000000 --- a/include/asm-arm/system.h +++ /dev/null @@ -1,388 +0,0 @@ -#ifndef __ASM_ARM_SYSTEM_H -#define __ASM_ARM_SYSTEM_H - -#ifdef __KERNEL__ - -#include - -#define CPU_ARCH_UNKNOWN 0 -#define CPU_ARCH_ARMv3 1 -#define CPU_ARCH_ARMv4 2 -#define CPU_ARCH_ARMv4T 3 -#define CPU_ARCH_ARMv5 4 -#define CPU_ARCH_ARMv5T 5 -#define CPU_ARCH_ARMv5TE 6 -#define CPU_ARCH_ARMv5TEJ 7 -#define CPU_ARCH_ARMv6 8 -#define CPU_ARCH_ARMv7 9 - -/* - * CR1 bits (CP#15 CR1) - */ -#define CR_M (1 << 0) /* MMU enable */ -#define CR_A (1 << 1) /* Alignment abort enable */ -#define CR_C (1 << 2) /* Dcache enable */ -#define CR_W (1 << 3) /* Write buffer enable */ -#define CR_P (1 << 4) /* 32-bit exception handler */ -#define CR_D (1 << 5) /* 32-bit data address range */ -#define CR_L (1 << 6) /* Implementation defined */ -#define CR_B (1 << 7) /* Big endian */ -#define CR_S (1 << 8) /* System MMU protection */ -#define CR_R (1 << 9) /* ROM MMU protection */ -#define CR_F (1 << 10) /* Implementation defined */ -#define CR_Z (1 << 11) /* Implementation defined */ -#define CR_I (1 << 12) /* Icache enable */ -#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ -#define CR_RR (1 << 14) /* Round Robin cache replacement */ -#define CR_L4 (1 << 15) /* LDR pc can set T bit */ -#define CR_DT (1 << 16) -#define CR_IT (1 << 18) -#define CR_ST (1 << 19) -#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ -#define CR_U (1 << 22) /* Unaligned access operation */ -#define CR_XP (1 << 23) /* Extended page tables */ -#define CR_VE (1 << 24) /* Vectored interrupts */ - -#define CPUID_ID 0 -#define CPUID_CACHETYPE 1 -#define CPUID_TCM 2 -#define CPUID_TLBTYPE 3 - -/* - * This is used to ensure the compiler did actually allocate the register we - * asked it for some inline assembly sequences. Apparently we can't trust - * the compiler from one version to another so a bit of paranoia won't hurt. - * This string is meant to be concatenated with the inline asm string and - * will cause compilation to stop on mismatch. - * (for details, see gcc PR 15089) - */ -#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -#ifdef CONFIG_CPU_CP15 -#define read_cpuid(reg) \ - ({ \ - unsigned int __val; \ - asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \ - : "=r" (__val) \ - : \ - : "cc"); \ - __val; \ - }) -#else -extern unsigned int processor_id; -#define read_cpuid(reg) (processor_id) -#endif - -/* - * The CPU ID never changes at run time, so we might as well tell the - * compiler that it's constant. Use this function to read the CPU ID - * rather than directly reading processor_id or read_cpuid() directly. - */ -static inline unsigned int read_cpuid_id(void) __attribute_const__; - -static inline unsigned int read_cpuid_id(void) -{ - return read_cpuid(CPUID_ID); -} - -#define __exception __attribute__((section(".exception.text"))) - -struct thread_info; -struct task_struct; - -/* information about the system we're running on */ -extern unsigned int system_rev; -extern unsigned int system_serial_low; -extern unsigned int system_serial_high; -extern unsigned int mem_fclk_21285; - -struct pt_regs; - -void die(const char *msg, struct pt_regs *regs, int err) - __attribute__((noreturn)); - -struct siginfo; -void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, - unsigned long err, unsigned long trap); - -void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, - struct pt_regs *), - int sig, const char *name); - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -extern asmlinkage void __backtrace(void); -extern asmlinkage void c_backtrace(unsigned long fp, int pmode); - -struct mm_struct; -extern void show_pte(struct mm_struct *mm, unsigned long addr); -extern void __show_regs(struct pt_regs *); - -extern int cpu_architecture(void); -extern void cpu_init(void); - -void arm_machine_restart(char mode); -extern void (*arm_pm_restart)(char str); - -/* - * Intel's XScale3 core supports some v6 features (supersections, L2) - * but advertises itself as v5 as it does not support the v6 ISA. For - * this reason, we need a way to explicitly test for this type of CPU. - */ -#ifndef CONFIG_CPU_XSC3 -#define cpu_is_xsc3() 0 -#else -static inline int cpu_is_xsc3(void) -{ - extern unsigned int processor_id; - - if ((processor_id & 0xffffe000) == 0x69056000) - return 1; - - return 0; -} -#endif - -#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) -#define cpu_is_xscale() 0 -#else -#define cpu_is_xscale() 1 -#endif - -#define UDBG_UNDEFINED (1 << 0) -#define UDBG_SYSCALL (1 << 1) -#define UDBG_BADABORT (1 << 2) -#define UDBG_SEGV (1 << 3) -#define UDBG_BUS (1 << 4) - -extern unsigned int user_debug; - -#if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) -#else -#define vectors_high() (0) -#endif - -#if __LINUX_ARM_ARCH__ >= 7 -#define isb() __asm__ __volatile__ ("isb" : : : "memory") -#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") -#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") -#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ - : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ - : : "r" (0) : "memory") -#else -#define isb() __asm__ __volatile__ ("" : : : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") -#endif - -#ifndef CONFIG_SMP -#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#else -#define mb() dmb() -#define rmb() dmb() -#define wmb() dmb() -#define smp_mb() dmb() -#define smp_rmb() dmb() -#define smp_wmb() dmb() -#endif -#define read_barrier_depends() do { } while(0) -#define smp_read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; smp_mb(); } while (0) -#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); - -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ -extern unsigned long cr_alignment; /* defined in entry-armv.S */ - -static inline unsigned int get_cr(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); - return val; -} - -static inline void set_cr(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" - : : "r" (val) : "cc"); - isb(); -} - -#ifndef CONFIG_SMP -extern void adjust_cr(unsigned long mask, unsigned long set); -#endif - -#define CPACC_FULL(n) (3 << (n * 2)) -#define CPACC_SVC(n) (1 << (n * 2)) -#define CPACC_DISABLE(n) (0 << (n * 2)) - -static inline unsigned int get_copro_access(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" - : "=r" (val) : : "cc"); - return val; -} - -static inline void set_copro_access(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" - : : "r" (val) : "cc"); - isb(); -} - -/* - * switch_mm() may do a full cache flush over the context switch, - * so enable interrupts over the context switch to avoid high - * latency. - */ -#define __ARCH_WANT_INTERRUPTS_ON_CTXSW - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. schedule() itself - * contains the memory barrier to tell GCC not to cache `current'. - */ -extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); - -#define switch_to(prev,next,last) \ -do { \ - last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ -} while (0) - -#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) -/* - * On the StrongARM, "swp" is terminally broken since it bypasses the - * cache totally. This means that the cache becomes inconsistent, and, - * since we use normal loads/stores as well, this is really bad. - * Typically, this causes oopsen in filp_close, but could have other, - * more disasterous effects. There are two work-arounds: - * 1. Disable interrupts and emulate the atomic swap - * 2. Clean the cache, perform atomic swap, flush the cache - * - * We choose (1) since its the "easiest" to achieve here and is not - * dependent on the processor type. - * - * NOTE that this solution won't work on an SMP system, so explcitly - * forbid it here. - */ -#define swp_is_buggy -#endif - -static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) -{ - extern void __bad_xchg(volatile void *, int); - unsigned long ret; -#ifdef swp_is_buggy - unsigned long flags; -#endif -#if __LINUX_ARM_ARCH__ >= 6 - unsigned int tmp; -#endif - - switch (size) { -#if __LINUX_ARM_ARCH__ >= 6 - case 1: - asm volatile("@ __xchg1\n" - "1: ldrexb %0, [%3]\n" - " strexb %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - "1: ldrex %0, [%3]\n" - " strex %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#elif defined(swp_is_buggy) -#ifdef CONFIG_SMP -#error SMP is not supported on this platform -#endif - case 1: - raw_local_irq_save(flags); - ret = *(volatile unsigned char *)ptr; - *(volatile unsigned char *)ptr = x; - raw_local_irq_restore(flags); - break; - - case 4: - raw_local_irq_save(flags); - ret = *(volatile unsigned long *)ptr; - *(volatile unsigned long *)ptr = x; - raw_local_irq_restore(flags); - break; -#else - case 1: - asm volatile("@ __xchg1\n" - " swpb %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - " swp %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#endif - default: - __bad_xchg(ptr, size), ret = 0; - break; - } - - return ret; -} - -extern void disable_hlt(void); -extern void enable_hlt(void); - -#include - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include -#endif - -#endif /* __ASSEMBLY__ */ - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h deleted file mode 100644 index f784d11f40b..00000000000 --- a/include/asm-arm/termbits.h +++ /dev/null @@ -1,197 +0,0 @@ -#ifndef __ASM_ARM_TERMBITS_H -#define __ASM_ARM_TERMBITS_H - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/include/asm-arm/termios.h b/include/asm-arm/termios.h deleted file mode 100644 index 293e3f1bc3f..00000000000 --- a/include/asm-arm/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ASM_ARM_TERMIOS_H -#define __ASM_ARM_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_ARM_TERMIOS_H */ diff --git a/include/asm-arm/therm.h b/include/asm-arm/therm.h deleted file mode 100644 index e51c923ecdf..00000000000 --- a/include/asm-arm/therm.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor - * DS1620 thermometer driver (as used in the Rebel.com NetWinder) - */ -#ifndef __ASM_THERM_H -#define __ASM_THERM_H - -/* ioctl numbers for /dev/therm */ -#define CMD_SET_THERMOSTATE 0x53 -#define CMD_GET_THERMOSTATE 0x54 -#define CMD_GET_STATUS 0x56 -#define CMD_GET_TEMPERATURE 0x57 -#define CMD_SET_THERMOSTATE2 0x58 -#define CMD_GET_THERMOSTATE2 0x59 -#define CMD_GET_TEMPERATURE2 0x5a -#define CMD_GET_FAN 0x5b -#define CMD_SET_FAN 0x5c - -#define FAN_OFF 0 -#define FAN_ON 1 -#define FAN_ALWAYS_ON 2 - -struct therm { - int hi; - int lo; -}; - -#endif diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h deleted file mode 100644 index d4be2d64616..00000000000 --- a/include/asm-arm/thread_info.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * linux/include/asm-arm/thread_info.h - * - * Copyright (C) 2002 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_THREAD_INFO_H -#define __ASM_ARM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include -#include - -#define THREAD_SIZE_ORDER 1 -#define THREAD_SIZE 8192 -#define THREAD_START_SP (THREAD_SIZE - 8) - -#ifndef __ASSEMBLY__ - -struct task_struct; -struct exec_domain; - -#include -#include - -typedef unsigned long mm_segment_t; - -struct cpu_context_save { - __u32 r4; - __u32 r5; - __u32 r6; - __u32 r7; - __u32 r8; - __u32 r9; - __u32 sl; - __u32 fp; - __u32 sp; - __u32 pc; - __u32 extra[2]; /* Xscale 'acc' register, etc */ -}; - -/* - * low level task data that entry.S needs immediate access to. - * __switch_to() assumes cpu_context follows immediately after cpu_domain. - */ -struct thread_info { - unsigned long flags; /* low level flags */ - int preempt_count; /* 0 => preemptable, <0 => bug */ - mm_segment_t addr_limit; /* address limit */ - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - __u32 cpu; /* cpu */ - __u32 cpu_domain; /* cpu domain */ - struct cpu_context_save cpu_context; /* cpu context */ - __u32 syscall; /* syscall number */ - __u8 used_cp[16]; /* thread used copro */ - unsigned long tp_value; - struct crunch_state crunchstate; - union fp_state fpstate __attribute__((aligned(8))); - union vfp_state vfpstate; -#ifdef CONFIG_ARM_THUMBEE - unsigned long thumbee_state; /* ThumbEE Handler Base register */ -#endif - struct restart_block restart_block; -}; - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_IO, DOMAIN_CLIENT), \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* - * how to get the thread information struct from C - */ -static inline struct thread_info *current_thread_info(void) __attribute_const__; - -static inline struct thread_info *current_thread_info(void) -{ - register unsigned long sp asm ("sp"); - return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); -} - -#define thread_saved_pc(tsk) \ - ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc))) -#define thread_saved_fp(tsk) \ - ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) - -extern void crunch_task_disable(struct thread_info *); -extern void crunch_task_copy(struct thread_info *, void *); -extern void crunch_task_restore(struct thread_info *, void *); -extern void crunch_task_release(struct thread_info *); - -extern void iwmmxt_task_disable(struct thread_info *); -extern void iwmmxt_task_copy(struct thread_info *, void *); -extern void iwmmxt_task_restore(struct thread_info *, void *); -extern void iwmmxt_task_release(struct thread_info *); -extern void iwmmxt_task_switch(struct thread_info *); - -#endif - -/* - * We use bit 30 of the preempt_count to indicate that kernel - * preemption is occurring. See include/asm-arm/hardirq.h. - */ -#define PREEMPT_ACTIVE 0x40000000 - -/* - * thread information flags: - * TIF_SYSCALL_TRACE - syscall trace active - * TIF_SIGPENDING - signal pending - * TIF_NEED_RESCHED - rescheduling necessary - * TIF_USEDFPU - FPU was used by this task this quantum (SMP) - * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED - */ -#define TIF_SIGPENDING 0 -#define TIF_NEED_RESCHED 1 -#define TIF_SYSCALL_TRACE 8 -#define TIF_POLLING_NRFLAG 16 -#define TIF_USING_IWMMXT 17 -#define TIF_MEMDIE 18 -#define TIF_FREEZE 19 - -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) -#define _TIF_FREEZE (1 << TIF_FREEZE) - -/* - * Change these and you break ASM code in entry-common.S - */ -#define _TIF_WORK_MASK 0x000000ff - -#endif /* __KERNEL__ */ -#endif /* __ASM_ARM_THREAD_INFO_H */ diff --git a/include/asm-arm/thread_notify.h b/include/asm-arm/thread_notify.h deleted file mode 100644 index 8866e521684..00000000000 --- a/include/asm-arm/thread_notify.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/asm-arm/thread_notify.h - * - * Copyright (C) 2006 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_THREAD_NOTIFY_H -#define ASMARM_THREAD_NOTIFY_H - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -#include -#include - -static inline int thread_register_notifier(struct notifier_block *n) -{ - extern struct atomic_notifier_head thread_notify_head; - return atomic_notifier_chain_register(&thread_notify_head, n); -} - -static inline void thread_unregister_notifier(struct notifier_block *n) -{ - extern struct atomic_notifier_head thread_notify_head; - atomic_notifier_chain_unregister(&thread_notify_head, n); -} - -static inline void thread_notify(unsigned long rc, struct thread_info *thread) -{ - extern struct atomic_notifier_head thread_notify_head; - atomic_notifier_call_chain(&thread_notify_head, rc, thread); -} - -#endif - -/* - * These are the reason codes for the thread notifier. - */ -#define THREAD_NOTIFY_FLUSH 0 -#define THREAD_NOTIFY_RELEASE 1 -#define THREAD_NOTIFY_SWITCH 2 - -#endif -#endif diff --git a/include/asm-arm/timex.h b/include/asm-arm/timex.h deleted file mode 100644 index 7b8d4cb24be..00000000000 --- a/include/asm-arm/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/timex.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Architecture Specific TIME specifications - */ -#ifndef _ASMARM_TIMEX_H -#define _ASMARM_TIMEX_H - -#include - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles (void) -{ - return 0; -} - -#endif diff --git a/include/asm-arm/tlb.h b/include/asm-arm/tlb.h deleted file mode 100644 index 36bd402a21c..00000000000 --- a/include/asm-arm/tlb.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/include/asm-arm/tlb.h - * - * Copyright (C) 2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Experimentation shows that on a StrongARM, it appears to be faster - * to use the "invalidate whole tlb" rather than "invalidate single - * tlb" for this. - * - * This appears true for both the process fork+exit case, as well as - * the munmap-large-area case. - */ -#ifndef __ASMARM_TLB_H -#define __ASMARM_TLB_H - -#include -#include - -#ifndef CONFIG_MMU - -#include -#include - -#else /* !CONFIG_MMU */ - -#include - -/* - * TLB handling. This allows us to remove pages from the page - * tables, and efficiently handle the TLB issues. - */ -struct mmu_gather { - struct mm_struct *mm; - unsigned int fullmm; -}; - -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - -static inline struct mmu_gather * -tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) -{ - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - - tlb->mm = mm; - tlb->fullmm = full_mm_flush; - - return tlb; -} - -static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) -{ - if (tlb->fullmm) - flush_tlb_mm(tlb->mm); - - /* keep the page table cache within bounds */ - check_pgt_cache(); - - put_cpu_var(mmu_gathers); -} - -#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) - -/* - * In the case of tlb vma handling, we can optimise these away in the - * case where we're doing a full MM flush. When we're doing a munmap, - * the vmas are adjusted to only cover the region to be torn down. - */ -static inline void -tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) -{ - if (!tlb->fullmm) - flush_cache_range(vma, vma->vm_start, vma->vm_end); -} - -static inline void -tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) -{ - if (!tlb->fullmm) - flush_tlb_range(vma, vma->vm_start, vma->vm_end); -} - -#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) - -#define tlb_migrate_finish(mm) do { } while (0) - -#endif /* CONFIG_MMU */ -#endif diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h deleted file mode 100644 index 909656c747e..00000000000 --- a/include/asm-arm/tlbflush.h +++ /dev/null @@ -1,500 +0,0 @@ -/* - * linux/include/asm-arm/tlbflush.h - * - * Copyright (C) 1999-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_TLBFLUSH_H -#define _ASMARM_TLBFLUSH_H - - -#ifndef CONFIG_MMU - -#define tlb_flush(tlb) ((void) tlb) - -#else /* CONFIG_MMU */ - -#include - -#define TLB_V3_PAGE (1 << 0) -#define TLB_V4_U_PAGE (1 << 1) -#define TLB_V4_D_PAGE (1 << 2) -#define TLB_V4_I_PAGE (1 << 3) -#define TLB_V6_U_PAGE (1 << 4) -#define TLB_V6_D_PAGE (1 << 5) -#define TLB_V6_I_PAGE (1 << 6) - -#define TLB_V3_FULL (1 << 8) -#define TLB_V4_U_FULL (1 << 9) -#define TLB_V4_D_FULL (1 << 10) -#define TLB_V4_I_FULL (1 << 11) -#define TLB_V6_U_FULL (1 << 12) -#define TLB_V6_D_FULL (1 << 13) -#define TLB_V6_I_FULL (1 << 14) - -#define TLB_V6_U_ASID (1 << 16) -#define TLB_V6_D_ASID (1 << 17) -#define TLB_V6_I_ASID (1 << 18) - -#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ -#define TLB_DCLEAN (1 << 30) -#define TLB_WB (1 << 31) - -/* - * MMU TLB Model - * ============= - * - * We have the following to choose from: - * v3 - ARMv3 - * v4 - ARMv4 without write buffer - * v4wb - ARMv4 with write buffer without I TLB flush entry instruction - * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction - * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) - * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction - */ -#undef _TLB -#undef MULTI_TLB - -#define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE) - -#ifdef CONFIG_CPU_TLB_V3 -# define v3_possible_flags v3_tlb_flags -# define v3_always_flags v3_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v3 -# endif -#else -# define v3_possible_flags 0 -# define v3_always_flags (-1UL) -#endif - -#define v4_tlb_flags (TLB_V4_U_FULL | TLB_V4_U_PAGE) - -#ifdef CONFIG_CPU_TLB_V4WT -# define v4_possible_flags v4_tlb_flags -# define v4_always_flags v4_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4 -# endif -#else -# define v4_possible_flags 0 -# define v4_always_flags (-1UL) -#endif - -#define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ - TLB_V4_I_FULL | TLB_V4_D_FULL | \ - TLB_V4_I_PAGE | TLB_V4_D_PAGE) - -#ifdef CONFIG_CPU_TLB_V4WBI -# define v4wbi_possible_flags v4wbi_tlb_flags -# define v4wbi_always_flags v4wbi_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4wbi -# endif -#else -# define v4wbi_possible_flags 0 -# define v4wbi_always_flags (-1UL) -#endif - -#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \ - TLB_V4_I_FULL | TLB_V4_D_FULL | \ - TLB_V4_I_PAGE | TLB_V4_D_PAGE) - -#ifdef CONFIG_CPU_TLB_FEROCEON -# define fr_possible_flags fr_tlb_flags -# define fr_always_flags fr_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4wbi -# endif -#else -# define fr_possible_flags 0 -# define fr_always_flags (-1UL) -#endif - -#define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \ - TLB_V4_I_FULL | TLB_V4_D_FULL | \ - TLB_V4_D_PAGE) - -#ifdef CONFIG_CPU_TLB_V4WB -# define v4wb_possible_flags v4wb_tlb_flags -# define v4wb_always_flags v4wb_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4wb -# endif -#else -# define v4wb_possible_flags 0 -# define v4wb_always_flags (-1UL) -#endif - -#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ - TLB_V6_I_FULL | TLB_V6_D_FULL | \ - TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ - TLB_V6_I_ASID | TLB_V6_D_ASID) - -#ifdef CONFIG_CPU_TLB_V6 -# define v6wbi_possible_flags v6wbi_tlb_flags -# define v6wbi_always_flags v6wbi_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v6wbi -# endif -#else -# define v6wbi_possible_flags 0 -# define v6wbi_always_flags (-1UL) -#endif - -#ifdef CONFIG_CPU_TLB_V7 -# define v7wbi_possible_flags v6wbi_tlb_flags -# define v7wbi_always_flags v6wbi_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v7wbi -# endif -#else -# define v7wbi_possible_flags 0 -# define v7wbi_always_flags (-1UL) -#endif - -#ifndef _TLB -#error Unknown TLB model -#endif - -#ifndef __ASSEMBLY__ - -#include - -struct cpu_tlb_fns { - void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *); - void (*flush_kern_range)(unsigned long, unsigned long); - unsigned long tlb_flags; -}; - -/* - * Select the calling method - */ -#ifdef MULTI_TLB - -#define __cpu_flush_user_tlb_range cpu_tlb.flush_user_range -#define __cpu_flush_kern_tlb_range cpu_tlb.flush_kern_range - -#else - -#define __cpu_flush_user_tlb_range __glue(_TLB,_flush_user_tlb_range) -#define __cpu_flush_kern_tlb_range __glue(_TLB,_flush_kern_tlb_range) - -extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); -extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long); - -#endif - -extern struct cpu_tlb_fns cpu_tlb; - -#define __cpu_tlb_flags cpu_tlb.tlb_flags - -/* - * TLB Management - * ============== - * - * The arch/arm/mm/tlb-*.S files implement these methods. - * - * The TLB specific code is expected to perform whatever tests it - * needs to determine if it should invalidate the TLB for each - * call. Start addresses are inclusive and end addresses are - * exclusive; it is safe to round these addresses down. - * - * flush_tlb_all() - * - * Invalidate the entire TLB. - * - * flush_tlb_mm(mm) - * - * Invalidate all TLB entries in a particular address - * space. - * - mm - mm_struct describing address space - * - * flush_tlb_range(mm,start,end) - * - * Invalidate a range of TLB entries in the specified - * address space. - * - mm - mm_struct describing address space - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - * flush_tlb_page(vaddr,vma) - * - * Invalidate the specified page in the specified address range. - * - vaddr - virtual address (may not be aligned) - * - vma - vma_struct describing address range - * - * flush_kern_tlb_page(kaddr) - * - * Invalidate the TLB entry for the specified page. The address - * will be in the kernels virtual memory space. Current uses - * only require the D-TLB to be invalidated. - * - kaddr - Kernel virtual memory address - */ - -/* - * We optimise the code below by: - * - building a set of TLB flags that might be set in __cpu_tlb_flags - * - building a set of TLB flags that will always be set in __cpu_tlb_flags - * - if we're going to need __cpu_tlb_flags, access it once and only once - * - * This allows us to build optimal assembly for the single-CPU type case, - * and as close to optimal given the compiler constrants for multi-CPU - * case. We could do better for the multi-CPU case if the compiler - * implemented the "%?" method, but this has been discontinued due to too - * many people getting it wrong. - */ -#define possible_tlb_flags (v3_possible_flags | \ - v4_possible_flags | \ - v4wbi_possible_flags | \ - fr_possible_flags | \ - v4wb_possible_flags | \ - v6wbi_possible_flags) - -#define always_tlb_flags (v3_always_flags & \ - v4_always_flags & \ - v4wbi_always_flags & \ - fr_always_flags & \ - v4wb_always_flags & \ - v6wbi_always_flags) - -#define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) - -static inline void local_flush_tlb_all(void) -{ - const int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_WB)) - dsb(); - - if (tlb_flag(TLB_V3_FULL)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL)) - asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL)) - asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } -} - -static inline void local_flush_tlb_mm(struct mm_struct *mm) -{ - const int zero = 0; - const int asid = ASID(mm); - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_WB)) - dsb(); - - if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) { - if (tlb_flag(TLB_V3_FULL)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_U_FULL)) - asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_D_FULL)) - asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - } - - if (tlb_flag(TLB_V6_U_ASID)) - asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V6_D_ASID)) - asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V6_I_ASID)) - asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } -} - -static inline void -local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) -{ - const int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - - uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); - - if (tlb_flag(TLB_WB)) - dsb(); - - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { - if (tlb_flag(TLB_V3_PAGE)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); - if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - } - - if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } -} - -static inline void local_flush_tlb_kernel_page(unsigned long kaddr) -{ - const int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - - kaddr &= PAGE_MASK; - - if (tlb_flag(TLB_WB)) - dsb(); - - if (tlb_flag(TLB_V3_PAGE)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); - if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - - if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } -} - -/* - * flush_pmd_entry - * - * Flush a PMD entry (word aligned, or double-word aligned) to - * RAM if the TLB for the CPU we are running on requires this. - * This is typically used when we are creating PMD entries. - * - * clean_pmd_entry - * - * Clean (but don't drain the write buffer) if the CPU requires - * these operations. This is typically used when we are removing - * PMD entries. - */ -static inline void flush_pmd_entry(pmd_t *pmd) -{ - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_DCLEAN)) - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_L2CLEAN_FR)) - asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_WB)) - dsb(); -} - -static inline void clean_pmd_entry(pmd_t *pmd) -{ - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_DCLEAN)) - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_L2CLEAN_FR)) - asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" - : : "r" (pmd) : "cc"); -} - -#undef tlb_flag -#undef always_tlb_flags -#undef possible_tlb_flags - -/* - * Convert calls to our calling convention. - */ -#define local_flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) -#define local_flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) - -#ifndef CONFIG_SMP -#define flush_tlb_all local_flush_tlb_all -#define flush_tlb_mm local_flush_tlb_mm -#define flush_tlb_page local_flush_tlb_page -#define flush_tlb_kernel_page local_flush_tlb_kernel_page -#define flush_tlb_range local_flush_tlb_range -#define flush_tlb_kernel_range local_flush_tlb_kernel_range -#else -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr); -extern void flush_tlb_kernel_page(unsigned long kaddr); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -#endif - -/* - * if PG_dcache_dirty is set for the page, we need to ensure that any - * cache entries for the kernels virtual memory range are written - * back to the page. - */ -extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte); - -#endif - -#endif /* CONFIG_MMU */ - -#endif diff --git a/include/asm-arm/topology.h b/include/asm-arm/topology.h deleted file mode 100644 index accbd7cad9b..00000000000 --- a/include/asm-arm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_ARM_TOPOLOGY_H -#define _ASM_ARM_TOPOLOGY_H - -#include - -#endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h deleted file mode 100644 index aa399aec568..00000000000 --- a/include/asm-arm/traps.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASMARM_TRAP_H -#define _ASMARM_TRAP_H - -#include - -struct undef_hook { - struct list_head node; - u32 instr_mask; - u32 instr_val; - u32 cpsr_mask; - u32 cpsr_val; - int (*fn)(struct pt_regs *regs, unsigned int instr); -}; - -void register_undef_hook(struct undef_hook *hook); -void unregister_undef_hook(struct undef_hook *hook); - -static inline int in_exception_text(unsigned long ptr) -{ - extern char __exception_text_start[]; - extern char __exception_text_end[]; - - return ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; -} - -extern void __init early_trap_init(void); - -#endif diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h deleted file mode 100644 index 345df01534a..00000000000 --- a/include/asm-arm/types.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; -typedef u32 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif - diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h deleted file mode 100644 index 4c1a3fa9f25..00000000000 --- a/include/asm-arm/uaccess.h +++ /dev/null @@ -1,444 +0,0 @@ -/* - * linux/include/asm-arm/uaccess.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_UACCESS_H -#define _ASMARM_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - -/* - * These two are intentionally not defined anywhere - if the kernel - * code generates any references to them, that's a bug. - */ -extern int __get_user_bad(void); -extern int __put_user_bad(void); - -/* - * Note that this is actually 0x1,0000,0000 - */ -#define KERNEL_DS 0x00000000 -#define get_ds() (KERNEL_DS) - -#ifdef CONFIG_MMU - -#define USER_DS TASK_SIZE -#define get_fs() (current_thread_info()->addr_limit) - -static inline void set_fs(mm_segment_t fs) -{ - current_thread_info()->addr_limit = fs; - modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); -} - -#define segment_eq(a,b) ((a) == (b)) - -#define __addr_ok(addr) ({ \ - unsigned long flag; \ - __asm__("cmp %2, %0; movlo %0, #0" \ - : "=&r" (flag) \ - : "0" (current_thread_info()->addr_limit), "r" (addr) \ - : "cc"); \ - (flag == 0); }) - -/* We use 33-bit arithmetic here... */ -#define __range_ok(addr,size) ({ \ - unsigned long flag, roksum; \ - __chk_user_ptr(addr); \ - __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \ - : "=&r" (flag), "=&r" (roksum) \ - : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \ - : "cc"); \ - flag; }) - -/* - * Single-value transfer routines. They automatically use the right - * size if we just have the right pointer type. Note that the functions - * which read from user space (*get_*) need to take care not to leak - * kernel data even if the calling code is buggy and fails to check - * the return value. This means zeroing out the destination variable - * or buffer on error. Normally this is done out of line by the - * fixup code, but there are a few places where it intrudes on the - * main code path. When we only write to user space, there is no - * problem. - */ -extern int __get_user_1(void *); -extern int __get_user_2(void *); -extern int __get_user_4(void *); - -#define __get_user_x(__r2,__p,__e,__s,__i...) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%1", "r2") \ - "bl __get_user_" #__s \ - : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") - -#define get_user(x,p) \ - ({ \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register unsigned long __r2 asm("r2"); \ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ - case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ - break; \ - case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ - break; \ - default: __e = __get_user_bad(); break; \ - } \ - x = (typeof(*(p))) __r2; \ - __e; \ - }) - -extern int __put_user_1(void *, unsigned int); -extern int __put_user_2(void *, unsigned int); -extern int __put_user_4(void *, unsigned int); -extern int __put_user_8(void *, unsigned long long); - -#define __put_user_x(__r2,__p,__e,__s) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%2", "r2") \ - "bl __put_user_" #__s \ - : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ - : "ip", "lr", "cc") - -#define put_user(x,p) \ - ({ \ - register const typeof(*(p)) __r2 asm("r2") = (x); \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __put_user_x(__r2, __p, __e, 1); \ - break; \ - case 2: \ - __put_user_x(__r2, __p, __e, 2); \ - break; \ - case 4: \ - __put_user_x(__r2, __p, __e, 4); \ - break; \ - case 8: \ - __put_user_x(__r2, __p, __e, 8); \ - break; \ - default: __e = __put_user_bad(); break; \ - } \ - __e; \ - }) - -#else /* CONFIG_MMU */ - -/* - * uClinux has only one addr space, so has simplified address limits. - */ -#define USER_DS KERNEL_DS - -#define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) -#define get_fs() (KERNEL_DS) - -static inline void set_fs(mm_segment_t fs) -{ -} - -#define get_user(x,p) __get_user(x,p) -#define put_user(x,p) __put_user(x,p) - -#endif /* CONFIG_MMU */ - -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) - -/* - * The "__xxx" versions of the user access functions do not verify the - * address space - it must have been done previously with a separate - * "access_ok()" call. - * - * The "xxx_error" versions set the third argument to EFAULT if an - * error occurs, and leave it unchanged on success. Note that these - * versions are void (ie, don't return a value as such). - */ -#define __get_user(x,ptr) \ -({ \ - long __gu_err = 0; \ - __get_user_err((x),(ptr),__gu_err); \ - __gu_err; \ -}) - -#define __get_user_error(x,ptr,err) \ -({ \ - __get_user_err((x),(ptr),err); \ - (void) 0; \ -}) - -#define __get_user_err(x,ptr,err) \ -do { \ - unsigned long __gu_addr = (unsigned long)(ptr); \ - unsigned long __gu_val; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ - case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ - case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \ - default: (__gu_val) = __get_user_bad(); \ - } \ - (x) = (__typeof__(*(ptr)))__gu_val; \ -} while (0) - -#define __get_user_asm_byte(x,addr,err) \ - __asm__ __volatile__( \ - "1: ldrbt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " mov %1, #0\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __get_user_asm_half(x,__gu_addr,err) \ -({ \ - unsigned long __b1, __b2; \ - __get_user_asm_byte(__b1, __gu_addr, err); \ - __get_user_asm_byte(__b2, __gu_addr + 1, err); \ - (x) = __b1 | (__b2 << 8); \ -}) -#else -#define __get_user_asm_half(x,__gu_addr,err) \ -({ \ - unsigned long __b1, __b2; \ - __get_user_asm_byte(__b1, __gu_addr, err); \ - __get_user_asm_byte(__b2, __gu_addr + 1, err); \ - (x) = (__b1 << 8) | __b2; \ -}) -#endif - -#define __get_user_asm_word(x,addr,err) \ - __asm__ __volatile__( \ - "1: ldrt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " mov %1, #0\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT) \ - : "cc") - -#define __put_user(x,ptr) \ -({ \ - long __pu_err = 0; \ - __put_user_err((x),(ptr),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_error(x,ptr,err) \ -({ \ - __put_user_err((x),(ptr),err); \ - (void) 0; \ -}) - -#define __put_user_err(x,ptr,err) \ -do { \ - unsigned long __pu_addr = (unsigned long)(ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ - case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ - case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \ - case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __put_user_asm_byte(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strbt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err) \ - : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __put_user_asm_half(x,__pu_addr,err) \ -({ \ - unsigned long __temp = (unsigned long)(x); \ - __put_user_asm_byte(__temp, __pu_addr, err); \ - __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \ -}) -#else -#define __put_user_asm_half(x,__pu_addr,err) \ -({ \ - unsigned long __temp = (unsigned long)(x); \ - __put_user_asm_byte(__temp >> 8, __pu_addr, err); \ - __put_user_asm_byte(__temp, __pu_addr + 1, err); \ -}) -#endif - -#define __put_user_asm_word(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err) \ - : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __reg_oper0 "%R2" -#define __reg_oper1 "%Q2" -#else -#define __reg_oper0 "%Q2" -#define __reg_oper1 "%R2" -#endif - -#define __put_user_asm_dword(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strt " __reg_oper1 ", [%1], #4\n" \ - "2: strt " __reg_oper0 ", [%1], #0\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "4: mov %0, %3\n" \ - " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 4b\n" \ - " .long 2b, 4b\n" \ - " .previous" \ - : "+r" (err), "+r" (__pu_addr) \ - : "r" (x), "i" (-EFAULT) \ - : "cc") - - -#ifdef CONFIG_MMU -extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n); -extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); -#else -#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) -#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) -#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) -#endif - -extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count); -extern unsigned long __must_check __strnlen_user(const char __user *s, long n); - -static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - n = __copy_from_user(to, from, n); - else /* security hole - plug it */ - memzero(to, n); - return n; -} - -static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - n = __copy_to_user(to, from, n); - return n; -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - n = __clear_user(to, n); - return n; -} - -static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - res = __strncpy_from_user(dst, src, count); - return res; -} - -#define strlen_user(s) strnlen_user(s, ~0UL >> 1) - -static inline long __must_check strnlen_user(const char __user *s, long n) -{ - unsigned long res = 0; - - if (__addr_ok(s)) - res = __strnlen_user(s, n); - - return res; -} - -#endif /* _ASMARM_UACCESS_H */ diff --git a/include/asm-arm/ucontext.h b/include/asm-arm/ucontext.h deleted file mode 100644 index bf65e9f4525..00000000000 --- a/include/asm-arm/ucontext.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef _ASMARM_UCONTEXT_H -#define _ASMARM_UCONTEXT_H - -#include - -/* - * struct sigcontext only has room for the basic registers, but struct - * ucontext now has room for all registers which need to be saved and - * restored. Coprocessor registers are stored in uc_regspace. Each - * coprocessor's saved state should start with a documented 32-bit magic - * number, followed by a 32-bit word giving the coproccesor's saved size. - * uc_regspace may be expanded if necessary, although this takes some - * coordination with glibc. - */ - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; - /* Allow for uc_sigmask growth. Glibc uses a 1024-bit sigset_t. */ - int __unused[32 - (sizeof (sigset_t) / sizeof (int))]; - /* Last for extensibility. Eight byte aligned because some - coprocessors require eight byte alignment. */ - unsigned long uc_regspace[128] __attribute__((__aligned__(8))); -}; - -#ifdef __KERNEL__ - -/* - * Coprocessor save state. The magic values and specific - * coprocessor's layouts are part of the userspace ABI. Each one of - * these should be a multiple of eight bytes and aligned to eight - * bytes, to prevent unpredictable padding in the signal frame. - */ - -#ifdef CONFIG_CRUNCH -#define CRUNCH_MAGIC 0x5065cf03 -#define CRUNCH_STORAGE_SIZE (CRUNCH_SIZE + 8) - -struct crunch_sigframe { - unsigned long magic; - unsigned long size; - struct crunch_state storage; -} __attribute__((__aligned__(8))); -#endif - -#ifdef CONFIG_IWMMXT -/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ -#define IWMMXT_MAGIC 0x12ef842a -#define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) - -struct iwmmxt_sigframe { - unsigned long magic; - unsigned long size; - struct iwmmxt_struct storage; -} __attribute__((__aligned__(8))); -#endif /* CONFIG_IWMMXT */ - -#ifdef CONFIG_VFP -#if __LINUX_ARM_ARCH__ < 6 -/* For ARM pre-v6, we use fstmiax and fldmiax. This adds one extra - * word after the registers, and a word of padding at the end for - * alignment. */ -#define VFP_MAGIC 0x56465001 -#define VFP_STORAGE_SIZE 152 -#else -#define VFP_MAGIC 0x56465002 -#define VFP_STORAGE_SIZE 144 -#endif - -struct vfp_sigframe -{ - unsigned long magic; - unsigned long size; - union vfp_state storage; -}; -#endif /* CONFIG_VFP */ - -/* - * Auxiliary signal frame. This saves stuff like FP state. - * The layout of this structure is not part of the user ABI, - * because the config options aren't. uc_regspace is really - * one of these. - */ -struct aux_sigframe { -#ifdef CONFIG_CRUNCH - struct crunch_sigframe crunch; -#endif -#ifdef CONFIG_IWMMXT - struct iwmmxt_sigframe iwmmxt; -#endif -#if 0 && defined CONFIG_VFP /* Not yet saved. */ - struct vfp_sigframe vfp; -#endif - /* Something that isn't a valid magic number for any coprocessor. */ - unsigned long end_magic; -} __attribute__((__aligned__(8))); - -#endif - -#endif /* !_ASMARM_UCONTEXT_H */ diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h deleted file mode 100644 index 44593a89490..00000000000 --- a/include/asm-arm/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_ARM_UNALIGNED_H -#define _ASM_ARM_UNALIGNED_H - -#include -#include -#include - -/* - * Select endianness - */ -#ifndef __ARMEB__ -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le -#else -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_ARM_UNALIGNED_H */ diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h deleted file mode 100644 index 7c570082b1e..00000000000 --- a/include/asm-arm/unistd.h +++ /dev/null @@ -1,450 +0,0 @@ -/* - * linux/include/asm-arm/unistd.h - * - * Copyright (C) 2001-2005 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Please forward _all_ changes to this file to rmk@arm.linux.org.uk, - * no matter what the change is. Thanks! - */ -#ifndef __ASM_ARM_UNISTD_H -#define __ASM_ARM_UNISTD_H - -#define __NR_OABI_SYSCALL_BASE 0x900000 - -#if defined(__thumb__) || defined(__ARM_EABI__) -#define __NR_SYSCALL_BASE 0 -#else -#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE -#endif - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) - /* 335 for pselect6 */ - /* 336 for ppoll */ -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) -#define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) - /* 346 for epoll_pwait */ -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) - -/* - * The following SWIs are ARM private. - */ -#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) -#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) -#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) -#define __ARM_NR_usr26 (__ARM_NR_BASE+3) -#define __ARM_NR_usr32 (__ARM_NR_BASE+4) -#define __ARM_NR_set_tls (__ARM_NR_BASE+5) - -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if defined(__ARM_EABI__) && !defined(__KERNEL__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif - -#ifdef __KERNEL__ - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_SYS_SOCKETCALL -#endif - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -/* - * Unimplemented (or alternatively implemented) syscalls - */ -#define __IGNORE_fadvise64_64 1 - -#endif /* __KERNEL__ */ -#endif /* __ASM_ARM_UNISTD_H */ diff --git a/include/asm-arm/user.h b/include/asm-arm/user.h deleted file mode 100644 index 825c1e7c582..00000000000 --- a/include/asm-arm/user.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _ARM_USER_H -#define _ARM_USER_H - -#include -#include -/* Core file format: The core file is written in such a way that gdb - can understand it and provide useful information to the user (under - linux we use the 'trad-core' bfd). There are quite a number of - obstacles to being able to view the contents of the floating point - registers, and until these are solved you will not be able to view the - contents of them. Actually, you can read in the core file and look at - the contents of the user struct to find out what the floating point - registers contain. - The actual file contents are as follows: - UPAGE: 1 page consisting of a user struct that tells gdb what is present - in the file. Directly after this is a copy of the task_struct, which - is currently not used by gdb, but it may come in useful at some point. - All of the registers are stored as part of the upage. The upage should - always be only one page. - DATA: The data area is stored. We use current->end_text to - current->brk to pick up all of the user variables, plus any memory - that may have been malloced. No attempt is made to determine if a page - is demand-zero or if a page is totally unused, we just cover the entire - range. All of the addresses are rounded in such a way that an integral - number of pages is written. - STACK: We need the stack information in order to get a meaningful - backtrace. We need to write the data from (esp) to - current->start_stack, so we round each of these off in order to be able - to write an integer number of pages. - The minimum core file size is 3 pages, or 12288 bytes. -*/ - -struct user_fp { - struct fp_reg { - unsigned int sign1:1; - unsigned int unused:15; - unsigned int sign2:1; - unsigned int exponent:14; - unsigned int j:1; - unsigned int mantissa1:31; - unsigned int mantissa0:32; - } fpregs[8]; - unsigned int fpsr:32; - unsigned int fpcr:32; - unsigned char ftype[8]; - unsigned int init_flag; -}; - -/* When the kernel dumps core, it starts by dumping the user struct - - this will be used by gdb to figure out where the data and stack segments - are within the file, and what virtual addresses to use. */ -struct user{ -/* We start with the registers, to mimic the way that "memory" is returned - from the ptrace(3,...) function. */ - struct pt_regs regs; /* Where the registers are actually stored */ -/* ptrace does not yet supply these. Someday.... */ - int u_fpvalid; /* True if math co-processor being used. */ - /* for this mess. Not yet used. */ -/* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - unsigned long u_ar0; /* Used by gdb to help find the values for */ - /* the registers. */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ - int u_debugreg[8]; - struct user_fp u_fp; /* FP state */ - struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */ - /* the FP registers. */ -}; -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* _ARM_USER_H */ diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h deleted file mode 100644 index 5f9a2cb3d45..00000000000 --- a/include/asm-arm/vfp.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/include/asm-arm/vfp.h - * - * VFP register definitions. - * First, the standard VFP set. - */ - -#define FPSID cr0 -#define FPSCR cr1 -#define MVFR1 cr6 -#define MVFR0 cr7 -#define FPEXC cr8 -#define FPINST cr9 -#define FPINST2 cr10 - -/* FPSID bits */ -#define FPSID_IMPLEMENTER_BIT (24) -#define FPSID_IMPLEMENTER_MASK (0xff << FPSID_IMPLEMENTER_BIT) -#define FPSID_SOFTWARE (1<<23) -#define FPSID_FORMAT_BIT (21) -#define FPSID_FORMAT_MASK (0x3 << FPSID_FORMAT_BIT) -#define FPSID_NODOUBLE (1<<20) -#define FPSID_ARCH_BIT (16) -#define FPSID_ARCH_MASK (0xF << FPSID_ARCH_BIT) -#define FPSID_PART_BIT (8) -#define FPSID_PART_MASK (0xFF << FPSID_PART_BIT) -#define FPSID_VARIANT_BIT (4) -#define FPSID_VARIANT_MASK (0xF << FPSID_VARIANT_BIT) -#define FPSID_REV_BIT (0) -#define FPSID_REV_MASK (0xF << FPSID_REV_BIT) - -/* FPEXC bits */ -#define FPEXC_EX (1 << 31) -#define FPEXC_EN (1 << 30) -#define FPEXC_DEX (1 << 29) -#define FPEXC_FP2V (1 << 28) -#define FPEXC_VV (1 << 27) -#define FPEXC_TFV (1 << 26) -#define FPEXC_LENGTH_BIT (8) -#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT) -#define FPEXC_IDF (1 << 7) -#define FPEXC_IXF (1 << 4) -#define FPEXC_UFF (1 << 3) -#define FPEXC_OFF (1 << 2) -#define FPEXC_DZF (1 << 1) -#define FPEXC_IOF (1 << 0) -#define FPEXC_TRAP_MASK (FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF) - -/* FPSCR bits */ -#define FPSCR_DEFAULT_NAN (1<<25) -#define FPSCR_FLUSHTOZERO (1<<24) -#define FPSCR_ROUND_NEAREST (0<<22) -#define FPSCR_ROUND_PLUSINF (1<<22) -#define FPSCR_ROUND_MINUSINF (2<<22) -#define FPSCR_ROUND_TOZERO (3<<22) -#define FPSCR_RMODE_BIT (22) -#define FPSCR_RMODE_MASK (3 << FPSCR_RMODE_BIT) -#define FPSCR_STRIDE_BIT (20) -#define FPSCR_STRIDE_MASK (3 << FPSCR_STRIDE_BIT) -#define FPSCR_LENGTH_BIT (16) -#define FPSCR_LENGTH_MASK (7 << FPSCR_LENGTH_BIT) -#define FPSCR_IOE (1<<8) -#define FPSCR_DZE (1<<9) -#define FPSCR_OFE (1<<10) -#define FPSCR_UFE (1<<11) -#define FPSCR_IXE (1<<12) -#define FPSCR_IDE (1<<15) -#define FPSCR_IOC (1<<0) -#define FPSCR_DZC (1<<1) -#define FPSCR_OFC (1<<2) -#define FPSCR_UFC (1<<3) -#define FPSCR_IXC (1<<4) -#define FPSCR_IDC (1<<7) - -/* MVFR0 bits */ -#define MVFR0_A_SIMD_BIT (0) -#define MVFR0_A_SIMD_MASK (0xf << MVFR0_A_SIMD_BIT) - -/* Bit patterns for decoding the packaged operation descriptors */ -#define VFPOPDESC_LENGTH_BIT (9) -#define VFPOPDESC_LENGTH_MASK (0x07 << VFPOPDESC_LENGTH_BIT) -#define VFPOPDESC_UNUSED_BIT (24) -#define VFPOPDESC_UNUSED_MASK (0xFF << VFPOPDESC_UNUSED_BIT) -#define VFPOPDESC_OPDESC_MASK (~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK)) diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h deleted file mode 100644 index cccb3892e73..00000000000 --- a/include/asm-arm/vfpmacros.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/include/asm-arm/vfpmacros.h - * - * Assembler-only file containing VFP macros and register definitions. - */ -#include "vfp.h" - -@ Macros to allow building with old toolkits (with no VFP support) - .macro VFPFMRX, rd, sysreg, cond - MRC\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMRX \rd, \sysreg - .endm - - .macro VFPFMXR, sysreg, rd, cond - MCR\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMXR \sysreg, \rd - .endm - - @ read all the working registers back into the VFP - .macro VFPFLDMIA, base, tmp -#if __LINUX_ARM_ARCH__ < 6 - LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} -#else - LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} -#endif -#ifdef CONFIG_VFPv3 - VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 - and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field - cmp \tmp, #2 @ 32 x 64bit registers? - ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space -#endif - .endm - - @ write all the working registers out of the VFP - .macro VFPFSTMIA, base, tmp -#if __LINUX_ARM_ARCH__ < 6 - STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} -#else - STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} -#endif -#ifdef CONFIG_VFPv3 - VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 - and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field - cmp \tmp, #2 @ 32 x 64bit registers? - stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space -#endif - .endm diff --git a/include/asm-arm/vga.h b/include/asm-arm/vga.h deleted file mode 100644 index 1e0b913c3d7..00000000000 --- a/include/asm-arm/vga.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef ASMARM_VGA_H -#define ASMARM_VGA_H - -#include -#include - -#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) - -#define vga_readb(x) (*((volatile unsigned char *)x)) -#define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) - -#endif diff --git a/include/asm-arm/xor.h b/include/asm-arm/xor.h deleted file mode 100644 index e7c4cf58bed..00000000000 --- a/include/asm-arm/xor.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * linux/include/asm-arm/xor.h - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -#define __XOR(a1, a2) a1 ^= a2 - -#define GET_BLOCK_2(dst) \ - __asm__("ldmia %0, {%1, %2}" \ - : "=r" (dst), "=r" (a1), "=r" (a2) \ - : "0" (dst)) - -#define GET_BLOCK_4(dst) \ - __asm__("ldmia %0, {%1, %2, %3, %4}" \ - : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ - : "0" (dst)) - -#define XOR_BLOCK_2(src) \ - __asm__("ldmia %0!, {%1, %2}" \ - : "=r" (src), "=r" (b1), "=r" (b2) \ - : "0" (src)); \ - __XOR(a1, b1); __XOR(a2, b2); - -#define XOR_BLOCK_4(src) \ - __asm__("ldmia %0!, {%1, %2, %3, %4}" \ - : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ - : "0" (src)); \ - __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) - -#define PUT_BLOCK_2(dst) \ - __asm__ __volatile__("stmia %0!, {%2, %3}" \ - : "=r" (dst) \ - : "0" (dst), "r" (a1), "r" (a2)) - -#define PUT_BLOCK_4(dst) \ - __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ - : "=r" (dst) \ - : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) - -static void -xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 4; - register unsigned int a1 __asm__("r4"); - register unsigned int a2 __asm__("r5"); - register unsigned int a3 __asm__("r6"); - register unsigned int a4 __asm__("r7"); - register unsigned int b1 __asm__("r8"); - register unsigned int b2 __asm__("r9"); - register unsigned int b3 __asm__("ip"); - register unsigned int b4 __asm__("lr"); - - do { - GET_BLOCK_4(p1); - XOR_BLOCK_4(p2); - PUT_BLOCK_4(p1); - } while (--lines); -} - -static void -xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 4; - register unsigned int a1 __asm__("r4"); - register unsigned int a2 __asm__("r5"); - register unsigned int a3 __asm__("r6"); - register unsigned int a4 __asm__("r7"); - register unsigned int b1 __asm__("r8"); - register unsigned int b2 __asm__("r9"); - register unsigned int b3 __asm__("ip"); - register unsigned int b4 __asm__("lr"); - - do { - GET_BLOCK_4(p1); - XOR_BLOCK_4(p2); - XOR_BLOCK_4(p3); - PUT_BLOCK_4(p1); - } while (--lines); -} - -static void -xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3, unsigned long *p4) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 2; - register unsigned int a1 __asm__("r8"); - register unsigned int a2 __asm__("r9"); - register unsigned int b1 __asm__("ip"); - register unsigned int b2 __asm__("lr"); - - do { - GET_BLOCK_2(p1); - XOR_BLOCK_2(p2); - XOR_BLOCK_2(p3); - XOR_BLOCK_2(p4); - PUT_BLOCK_2(p1); - } while (--lines); -} - -static void -xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3, unsigned long *p4, unsigned long *p5) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 2; - register unsigned int a1 __asm__("r8"); - register unsigned int a2 __asm__("r9"); - register unsigned int b1 __asm__("ip"); - register unsigned int b2 __asm__("lr"); - - do { - GET_BLOCK_2(p1); - XOR_BLOCK_2(p2); - XOR_BLOCK_2(p3); - XOR_BLOCK_2(p4); - XOR_BLOCK_2(p5); - PUT_BLOCK_2(p1); - } while (--lines); -} - -static struct xor_block_template xor_block_arm4regs = { - .name = "arm4regs", - .do_2 = xor_arm4regs_2, - .do_3 = xor_arm4regs_3, - .do_4 = xor_arm4regs_4, - .do_5 = xor_arm4regs_5, -}; - -#undef XOR_TRY_TEMPLATES -#define XOR_TRY_TEMPLATES \ - do { \ - xor_speed(&xor_block_arm4regs); \ - xor_speed(&xor_block_8regs); \ - xor_speed(&xor_block_32regs); \ - } while (0) -- cgit v1.2.3 From bccf650270a94cec6e9238743e84c6e01de30c70 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 22:33:18 +0100 Subject: [ARM] Fix explicit asm(-arm)?/arch-foo references No file should be explicitly referencing its own platform headers by specifying an absolute include path. Fix these paths to use standard includes. Signed-off-by: Russell King --- include/asm-arm/arch-ns9xxx/debug-macro.S | 2 +- include/asm-arm/arch-ns9xxx/entry-macro.S | 2 +- include/asm-arm/arch-ns9xxx/processor.h | 2 +- include/asm-arm/arch-ns9xxx/system.h | 4 ++-- include/asm-arm/arch-omap/board.h | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S index b21b93eb2db..94680950ee6 100644 --- a/include/asm-arm/arch-ns9xxx/debug-macro.S +++ b/include/asm-arm/arch-ns9xxx/debug-macro.S @@ -9,7 +9,7 @@ */ #include -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 89a21c53046..2f6c89ddf95 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -9,7 +9,7 @@ * the Free Software Foundation. */ #include -#include +#include .macro get_irqnr_preamble, base, tmp ldr \base, =SYS_ISRADDR diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h index f7b53b65de8..3137e5ba01a 100644 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_PROCESSOR_H #define __ASM_ARCH_PROCESSOR_H -#include +#include #define processor_is_ns9210() (0 \ || module_is_cc7ucamry() \ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h index 1348073afe4..c2941684d66 100644 --- a/include/asm-arm/arch-ns9xxx/system.h +++ b/include/asm-arm/arch-ns9xxx/system.h @@ -12,8 +12,8 @@ #define __ASM_ARCH_SYSTEM_H #include -#include -#include +#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h index db44c5d1f1a..99564c70f12 100644 --- a/include/asm-arm/arch-omap/board.h +++ b/include/asm-arm/arch-omap/board.h @@ -154,7 +154,7 @@ struct omap_version_config { }; -#include +#include struct omap_board_config_entry { u16 tag; -- cgit v1.2.3 From 0f8469a54f7bd65f2c740a5480c56260dc8a7ae0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Aug 2008 15:06:16 +0100 Subject: [ARM] Eliminate useless includes of asm/mach-types.h There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King --- include/asm-arm/arch-ixp23xx/memory.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h index 6d859d742d7..6940a14f32a 100644 --- a/include/asm-arm/arch-ixp23xx/memory.h +++ b/include/asm-arm/arch-ixp23xx/memory.h @@ -28,7 +28,6 @@ * to an address that the kernel can use. */ #ifndef __ASSEMBLY__ -#include #define __virt_to_bus(v) \ ({ unsigned int ret; \ -- cgit v1.2.3 From be509729356b7433f73df2b9a966674a437fbbc1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Aug 2008 10:41:28 +0100 Subject: [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King --- include/asm-arm/arch-aaec2000/io.h | 2 +- include/asm-arm/arch-at91/cpu.h | 2 +- include/asm-arm/arch-at91/debug-macro.S | 2 +- include/asm-arm/arch-at91/entry-macro.S | 2 +- include/asm-arm/arch-at91/memory.h | 2 +- include/asm-arm/arch-at91/system.h | 2 +- include/asm-arm/arch-at91/timex.h | 2 +- include/asm-arm/arch-cl7500/entry-macro.S | 2 +- include/asm-arm/arch-cl7500/io.h | 2 +- include/asm-arm/arch-clps711x/entry-macro.S | 2 +- include/asm-arm/arch-clps711x/io.h | 2 +- include/asm-arm/arch-clps711x/system.h | 2 +- include/asm-arm/arch-clps711x/uncompress.h | 2 +- include/asm-arm/arch-davinci/gpio.h | 2 +- include/asm-arm/arch-davinci/system.h | 2 +- include/asm-arm/arch-ebsa285/entry-macro.S | 2 +- include/asm-arm/arch-ebsa285/io.h | 2 +- include/asm-arm/arch-ebsa285/system.h | 2 +- include/asm-arm/arch-ep93xx/hardware.h | 4 ++++ include/asm-arm/arch-ep93xx/system.h | 2 +- include/asm-arm/arch-h720x/io.h | 2 +- include/asm-arm/arch-h720x/system.h | 2 +- include/asm-arm/arch-h720x/uncompress.h | 2 +- include/asm-arm/arch-imx/entry-macro.S | 2 +- include/asm-arm/arch-imx/io.h | 2 +- include/asm-arm/arch-imx/irqs.h | 2 +- include/asm-arm/arch-integrator/entry-macro.S | 2 +- include/asm-arm/arch-iop13xx/adma.h | 2 +- include/asm-arm/arch-iop13xx/timex.h | 2 +- include/asm-arm/arch-iop13xx/uncompress.h | 2 +- include/asm-arm/arch-iop32x/io.h | 2 +- include/asm-arm/arch-iop32x/memory.h | 2 +- include/asm-arm/arch-iop32x/timex.h | 2 +- include/asm-arm/arch-iop32x/uncompress.h | 2 +- include/asm-arm/arch-iop33x/io.h | 2 +- include/asm-arm/arch-iop33x/memory.h | 2 +- include/asm-arm/arch-iop33x/timex.h | 2 +- include/asm-arm/arch-iop33x/uncompress.h | 2 +- include/asm-arm/arch-ixp2000/io.h | 2 +- include/asm-arm/arch-ixp2000/system.h | 2 +- include/asm-arm/arch-ixp23xx/memory.h | 2 +- include/asm-arm/arch-ixp23xx/system.h | 2 +- include/asm-arm/arch-ixp4xx/avila.h | 2 +- include/asm-arm/arch-ixp4xx/coyote.h | 2 +- include/asm-arm/arch-ixp4xx/dma.h | 2 +- include/asm-arm/arch-ixp4xx/dsmg600.h | 2 +- include/asm-arm/arch-ixp4xx/entry-macro.S | 2 +- include/asm-arm/arch-ixp4xx/fsg.h | 2 +- include/asm-arm/arch-ixp4xx/gpio.h | 2 +- include/asm-arm/arch-ixp4xx/gtwx5715.h | 2 +- include/asm-arm/arch-ixp4xx/io.h | 2 +- include/asm-arm/arch-ixp4xx/ixdp425.h | 2 +- include/asm-arm/arch-ixp4xx/nas100d.h | 2 +- include/asm-arm/arch-ixp4xx/nslu2.h | 2 +- include/asm-arm/arch-ixp4xx/platform.h | 2 +- include/asm-arm/arch-ixp4xx/prpmc1100.h | 2 +- include/asm-arm/arch-ixp4xx/system.h | 2 +- include/asm-arm/arch-ixp4xx/timex.h | 2 +- include/asm-arm/arch-ks8695/debug-macro.S | 2 +- include/asm-arm/arch-ks8695/entry-macro.S | 2 +- include/asm-arm/arch-ks8695/memory.h | 2 +- include/asm-arm/arch-l7200/aux_reg.h | 2 +- include/asm-arm/arch-l7200/entry-macro.S | 2 +- include/asm-arm/arch-l7200/gp_timers.h | 2 +- include/asm-arm/arch-l7200/io.h | 2 +- include/asm-arm/arch-l7200/system.h | 2 +- include/asm-arm/arch-l7200/uncompress.h | 2 +- include/asm-arm/arch-lh7a40x/entry-macro.S | 2 +- include/asm-arm/arch-lh7a40x/io.h | 2 +- include/asm-arm/arch-msm/debug-macro.S | 2 +- include/asm-arm/arch-msm/system.h | 2 +- include/asm-arm/arch-mxc/gpio.h | 2 +- include/asm-arm/arch-mxc/irqs.h | 2 +- include/asm-arm/arch-mxc/memory.h | 2 +- include/asm-arm/arch-mxc/mxc_timer.h | 2 +- include/asm-arm/arch-mxc/timex.h | 2 +- include/asm-arm/arch-mxc/uncompress.h | 2 +- include/asm-arm/arch-netx/entry-macro.S | 2 +- include/asm-arm/arch-netx/system.h | 2 +- include/asm-arm/arch-ns9xxx/debug-macro.S | 2 +- include/asm-arm/arch-ns9xxx/entry-macro.S | 2 +- include/asm-arm/arch-ns9xxx/regs-bbu.h | 2 +- include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h | 2 +- include/asm-arm/arch-ns9xxx/regs-mem.h | 2 +- include/asm-arm/arch-ns9xxx/regs-sys-common.h | 2 +- include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h | 2 +- include/asm-arm/arch-omap/entry-macro.S | 2 +- include/asm-arm/arch-omap/io.h | 2 +- include/asm-arm/arch-omap/irqs.h | 2 +- include/asm-arm/arch-omap/mcbsp.h | 2 +- include/asm-arm/arch-omap/mtd-xip.h | 2 +- include/asm-arm/arch-omap/system.h | 2 +- include/asm-arm/arch-pnx4008/system.h | 2 +- include/asm-arm/arch-pnx4008/timex.h | 2 +- include/asm-arm/arch-pxa/entry-macro.S | 2 +- include/asm-arm/arch-pxa/gpio.h | 2 +- include/asm-arm/arch-pxa/io.h | 2 +- include/asm-arm/arch-realview/entry-macro.S | 2 +- include/asm-arm/arch-realview/system.h | 2 +- include/asm-arm/arch-realview/uncompress.h | 2 +- include/asm-arm/arch-rpc/entry-macro.S | 2 +- include/asm-arm/arch-rpc/io.h | 2 +- include/asm-arm/arch-rpc/system.h | 2 +- include/asm-arm/arch-rpc/uncompress.h | 2 +- include/asm-arm/arch-s3c2410/dma.h | 2 +- include/asm-arm/arch-s3c2410/entry-macro.S | 2 +- include/asm-arm/arch-s3c2410/hardware.h | 4 ---- include/asm-arm/arch-s3c2410/io.h | 2 +- include/asm-arm/arch-s3c2410/system-reset.h | 2 +- include/asm-arm/arch-s3c2410/system.h | 2 +- include/asm-arm/arch-sa1100/badge4.h | 2 +- include/asm-arm/arch-sa1100/debug-macro.S | 2 +- include/asm-arm/arch-sa1100/gpio.h | 2 +- include/asm-arm/arch-sa1100/ide.h | 2 +- include/asm-arm/arch-sa1100/system.h | 2 +- include/asm-arm/arch-shark/io.h | 2 +- include/asm-arm/arch-versatile/entry-macro.S | 2 +- include/asm-arm/arch-versatile/system.h | 2 +- 118 files changed, 120 insertions(+), 120 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h index d710204ac74..bc2364ab875 100644 --- a/include/asm-arm/arch-aaec2000/io.h +++ b/include/asm-arm/arch-aaec2000/io.h @@ -6,7 +6,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h index 52df794205c..f24b55c9083 100644 --- a/include/asm-arm/arch-at91/cpu.h +++ b/include/asm-arm/arch-at91/cpu.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_CPU_H #define __ASM_ARCH_CPU_H -#include +#include #include diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S index 13e9f5e1d4f..ff28696b6d9 100644 --- a/include/asm-arm/arch-at91/debug-macro.S +++ b/include/asm-arm/arch-at91/debug-macro.S @@ -11,7 +11,7 @@ * */ -#include +#include #include .macro addruart,rx diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S index 1005eee6219..cbaf6050154 100644 --- a/include/asm-arm/arch-at91/entry-macro.S +++ b/include/asm-arm/arch-at91/entry-macro.S @@ -10,7 +10,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h index 4835d678450..904fbd60f0e 100644 --- a/include/asm-arm/arch-at91/memory.h +++ b/include/asm-arm/arch-at91/memory.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include +#include #define PHYS_OFFSET (AT91_SDRAM_BASE) diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h index 6bf846098ea..c5e3d035726 100644 --- a/include/asm-arm/arch-at91/system.h +++ b/include/asm-arm/arch-at91/system.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include #include #include diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h index 298d8313cda..67c86a89828 100644 --- a/include/asm-arm/arch-at91/timex.h +++ b/include/asm-arm/arch-at91/timex.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -#include +#include #if defined(CONFIG_ARCH_AT91RM9200) diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S index 038b761fdad..5bd55557ccc 100644 --- a/include/asm-arm/arch-cl7500/entry-macro.S +++ b/include/asm-arm/arch-cl7500/entry-macro.S @@ -1,4 +1,4 @@ -#include +#include #include .equ ioc_base_high, IOC_BASE & 0xff000000 diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h index 89a33287f4f..80f9b19cac9 100644 --- a/include/asm-arm/arch-cl7500/io.h +++ b/include/asm-arm/arch-cl7500/io.h @@ -10,7 +10,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S index cd8c5a0bc7b..3554887cbcc 100644 --- a/include/asm-arm/arch-clps711x/entry-macro.S +++ b/include/asm-arm/arch-clps711x/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h index 53d790202c1..2b84dac8b2f 100644 --- a/include/asm-arm/arch-clps711x/io.h +++ b/include/asm-arm/arch-clps711x/io.h @@ -20,7 +20,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h index 11e1491535a..1f561772bee 100644 --- a/include/asm-arm/arch-clps711x/system.h +++ b/include/asm-arm/arch-clps711x/system.h @@ -20,7 +20,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include #include #include diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h index 03d233ae87c..8c5684ad086 100644 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ b/include/asm-arm/arch-clps711x/uncompress.h @@ -18,7 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include -#include +#include #include #undef CLPS7111_BASE diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h index ff8de30b2fb..54fda734649 100644 --- a/include/asm-arm/arch-davinci/gpio.h +++ b/include/asm-arm/arch-davinci/gpio.h @@ -14,7 +14,7 @@ #define __DAVINCI_GPIO_H #include -#include +#include /* * basic gpio routines diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h index 440ac515804..6713e4a44ee 100644 --- a/include/asm-arm/arch-davinci/system.h +++ b/include/asm-arm/arch-davinci/system.h @@ -12,7 +12,7 @@ #define __ASM_ARCH_SYSTEM_H #include -#include +#include extern void davinci_watchdog_reset(void); diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S index e63064edb73..e203c628d50 100644 --- a/include/asm-arm/arch-ebsa285/entry-macro.S +++ b/include/asm-arm/arch-ebsa285/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include #include diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h index f9c72914186..e88c6e23038 100644 --- a/include/asm-arm/arch-ebsa285/io.h +++ b/include/asm-arm/arch-ebsa285/io.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffff diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h index bf91c695c4b..a720bf7ca12 100644 --- a/include/asm-arm/arch-ebsa285/system.h +++ b/include/asm-arm/arch-ebsa285/system.h @@ -9,7 +9,7 @@ */ #include #include -#include +#include #include #include diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h index 9b69f454065..4233f6e8515 100644 --- a/include/asm-arm/arch-ep93xx/hardware.h +++ b/include/asm-arm/arch-ep93xx/hardware.h @@ -1,6 +1,8 @@ /* * linux/include/asm-arm/arch-ep93xx/hardware.h */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H #include "ep93xx-regs.h" @@ -10,3 +12,5 @@ #include "gesbc9312.h" #include "ts72xx.h" + +#endif diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h index 79b71858674..f1a5acf5191 100644 --- a/include/asm-arm/arch-ep93xx/system.h +++ b/include/asm-arm/arch-ep93xx/system.h @@ -2,7 +2,7 @@ * linux/include/asm-arm/arch-ep93xx/system.h */ -#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h index d3ccfd8172b..68814828c9a 100644 --- a/include/asm-arm/arch-h720x/io.h +++ b/include/asm-arm/arch-h720x/io.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h index 8dc1460b230..ddba93760b4 100644 --- a/include/asm-arm/arch-h720x/system.h +++ b/include/asm-arm/arch-h720x/system.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include static void arch_idle(void) { diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h index 18c69e0f358..61584cd5f42 100644 --- a/include/asm-arm/arch-h720x/uncompress.h +++ b/include/asm-arm/arch-h720x/uncompress.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include +#include #define LSR 0x14 #define TEMPTY 0x40 diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S index 0b84e81031c..5dc0f307c1b 100644 --- a/include/asm-arm/arch-imx/entry-macro.S +++ b/include/asm-arm/arch-imx/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h index b191cdd0557..1a1d9bb8863 100644 --- a/include/asm-arm/arch-imx/io.h +++ b/include/asm-arm/arch-imx/io.h @@ -20,7 +20,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h index f195542898e..238197cfb9d 100644 --- a/include/asm-arm/arch-imx/irqs.h +++ b/include/asm-arm/arch-imx/irqs.h @@ -23,7 +23,7 @@ #define __ARM_IRQS_H__ /* Use the imx definitions */ -#include +#include /* * IMX Interrupt numbers diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S index 491af1a23de..ef535a68bdd 100644 --- a/include/asm-arm/arch-integrator/entry-macro.S +++ b/include/asm-arm/arch-integrator/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h index ef4f5da2029..26f60af6716 100644 --- a/include/asm-arm/arch-iop13xx/adma.h +++ b/include/asm-arm/arch-iop13xx/adma.h @@ -19,7 +19,7 @@ #define _ADMA_H #include #include -#include +#include #include #define ADMA_ACCR(chan) (chan->mmr_base + 0x0) diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h index f0c51dd97ed..47564ecb387 100644 --- a/include/asm-arm/arch-iop13xx/timex.h +++ b/include/asm-arm/arch-iop13xx/timex.h @@ -1,3 +1,3 @@ -#include +#include #define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h index dd9c2934190..5d4418decb8 100644 --- a/include/asm-arm/arch-iop13xx/uncompress.h +++ b/include/asm-arm/arch-iop13xx/uncompress.h @@ -1,6 +1,6 @@ #include #include -#include +#include #define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS) #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h index 958af751a48..47b2736236e 100644 --- a/include/asm-arm/arch-iop32x/io.h +++ b/include/asm-arm/arch-iop32x/io.h @@ -11,7 +11,7 @@ #ifndef __IO_H #define __IO_H -#include +#include extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, unsigned int mtype); diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h index c51072af214..bdcf03895ee 100644 --- a/include/asm-arm/arch-iop32x/memory.h +++ b/include/asm-arm/arch-iop32x/memory.h @@ -5,7 +5,7 @@ #ifndef __MEMORY_H #define __MEMORY_H -#include +#include /* * Physical DRAM offset. diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h index 9934b087311..44570461982 100644 --- a/include/asm-arm/arch-iop32x/timex.h +++ b/include/asm-arm/arch-iop32x/timex.h @@ -4,6 +4,6 @@ * IOP32x architecture timex specifications */ -#include +#include #define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h index 070f15818fe..07028786394 100644 --- a/include/asm-arm/arch-iop32x/uncompress.h +++ b/include/asm-arm/arch-iop32x/uncompress.h @@ -5,7 +5,7 @@ #include #include #include -#include +#include static volatile u8 *uart_base; diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h index fec9c53e2b1..3fc607c46f0 100644 --- a/include/asm-arm/arch-iop33x/io.h +++ b/include/asm-arm/arch-iop33x/io.h @@ -11,7 +11,7 @@ #ifndef __IO_H #define __IO_H -#include +#include extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, unsigned int mtype); diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h index c8749127d6a..d798d83c83a 100644 --- a/include/asm-arm/arch-iop33x/memory.h +++ b/include/asm-arm/arch-iop33x/memory.h @@ -5,7 +5,7 @@ #ifndef __MEMORY_H #define __MEMORY_H -#include +#include /* * Physical DRAM offset. diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h index fe3e1e369ff..75a001e93da 100644 --- a/include/asm-arm/arch-iop33x/timex.h +++ b/include/asm-arm/arch-iop33x/timex.h @@ -4,6 +4,6 @@ * IOP3xx architecture timex specifications */ -#include +#include #define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h index e17fbc05877..34d9e8e8287 100644 --- a/include/asm-arm/arch-iop33x/uncompress.h +++ b/include/asm-arm/arch-iop33x/uncompress.h @@ -5,7 +5,7 @@ #include #include #include -#include +#include static volatile u32 *uart_base; diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index c0ff2c6c66e..5dc1d25dcb4 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -15,7 +15,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h index 3cc9a04f68c..8731dd36e45 100644 --- a/include/asm-arm/arch-ixp2000/system.h +++ b/include/asm-arm/arch-ixp2000/system.h @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -#include +#include #include static inline void arch_idle(void) diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h index 6940a14f32a..c3d906af9fe 100644 --- a/include/asm-arm/arch-ixp23xx/memory.h +++ b/include/asm-arm/arch-ixp23xx/memory.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include +#include /* * Physical DRAM offset. diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h index 925e6b0c338..54e8a51475e 100644 --- a/include/asm-arm/arch-ixp23xx/system.h +++ b/include/asm-arm/arch-ixp23xx/system.h @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include +#include #include static inline void arch_idle(void) diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h index 0dfea0ccd6b..88f053d6443 100644 --- a/include/asm-arm/arch-ixp4xx/avila.h +++ b/include/asm-arm/arch-ixp4xx/avila.h @@ -16,7 +16,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #define AVILA_SDA_PIN 7 diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h index 7ac9ba2c035..428b298afc1 100644 --- a/include/asm-arm/arch-ixp4xx/coyote.h +++ b/include/asm-arm/arch-ixp4xx/coyote.h @@ -13,7 +13,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif /* PCI controller GPIO to IRQ pin mappings */ diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h index 2c7f5327d80..0b755d6e919 100644 --- a/include/asm-arm/arch-ixp4xx/dma.h +++ b/include/asm-arm/arch-ixp4xx/dma.h @@ -14,7 +14,7 @@ #include #include #include -#include +#include #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h index b7673e171ab..5afae8c2e29 100644 --- a/include/asm-arm/arch-ixp4xx/dsmg600.h +++ b/include/asm-arm/arch-ixp4xx/dsmg600.h @@ -13,7 +13,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #define DSMG600_SDA_PIN 5 diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S index f144a005ed9..ed313c52a8a 100644 --- a/include/asm-arm/arch-ixp4xx/entry-macro.S +++ b/include/asm-arm/arch-ixp4xx/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h index c0100cc7981..168b9848eb4 100644 --- a/include/asm-arm/arch-ixp4xx/fsg.h +++ b/include/asm-arm/arch-ixp4xx/fsg.h @@ -16,7 +16,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #define FSG_SDA_PIN 12 diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h index 3a4c5b8ae9e..28e7d27b1b8 100644 --- a/include/asm-arm/arch-ixp4xx/gpio.h +++ b/include/asm-arm/arch-ixp4xx/gpio.h @@ -25,7 +25,7 @@ #ifndef __ASM_ARCH_IXP4XX_GPIO_H #define __ASM_ARCH_IXP4XX_GPIO_H -#include +#include static inline int gpio_request(unsigned gpio, const char *label) { diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h index c3069d67c00..2192dedc2f5 100644 --- a/include/asm-arm/arch-ixp4xx/gtwx5715.h +++ b/include/asm-arm/arch-ixp4xx/gtwx5715.h @@ -21,7 +21,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #include "irqs.h" diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h index de181ce958d..8e7426081f0 100644 --- a/include/asm-arm/arch-ixp4xx/io.h +++ b/include/asm-arm/arch-ixp4xx/io.h @@ -15,7 +15,7 @@ #include -#include +#include #define IO_SPACE_LIMIT 0xffff0000 diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h index e0791af3bfe..d0a1dcb48d5 100644 --- a/include/asm-arm/arch-ixp4xx/ixdp425.h +++ b/include/asm-arm/arch-ixp4xx/ixdp425.h @@ -13,7 +13,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #define IXDP425_SDA_PIN 7 diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h index 98d937897bc..ecb12d66399 100644 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ b/include/asm-arm/arch-ixp4xx/nas100d.h @@ -16,7 +16,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #define NAS100D_SDA_PIN 5 diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h index 714bbc65126..fa895f44e43 100644 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ b/include/asm-arm/arch-ixp4xx/nslu2.h @@ -15,7 +15,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #define NSLU2_SDA_PIN 7 diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index a1f2b5404db..b2af5154cef 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -8,7 +8,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #ifndef __ASSEMBLY__ diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h index e2532ab7f48..100855feafd 100644 --- a/include/asm-arm/arch-ixp4xx/prpmc1100.h +++ b/include/asm-arm/arch-ixp4xx/prpmc1100.h @@ -13,7 +13,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " +#error "Do not include this directly, instead #include " #endif #define PRPMC1100_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h index 8e1db423b1c..f11b92262a0 100644 --- a/include/asm-arm/arch-ixp4xx/system.h +++ b/include/asm-arm/arch-ixp4xx/system.h @@ -9,7 +9,7 @@ * */ -#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h index 3745e35cc03..c2559e28cbc 100644 --- a/include/asm-arm/arch-ixp4xx/timex.h +++ b/include/asm-arm/arch-ixp4xx/timex.h @@ -3,7 +3,7 @@ * */ -#include +#include /* * We use IXP425 General purpose timer for our timer needs, it runs at diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S index cd5f2fb1f06..d2583ffffa9 100644 --- a/include/asm-arm/arch-ks8695/debug-macro.S +++ b/include/asm-arm/arch-ks8695/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ -#include +#include #include .macro addruart, rx diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S index e34bdf85920..3993cfe67cf 100644 --- a/include/asm-arm/arch-ks8695/entry-macro.S +++ b/include/asm-arm/arch-ks8695/entry-macro.S @@ -11,7 +11,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h index 24f6a6e4a30..1b542f77977 100644 --- a/include/asm-arm/arch-ks8695/memory.h +++ b/include/asm-arm/arch-ks8695/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include +#include /* * Physical SRAM offset. diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h index 5b4396de16a..762cbc76c50 100644 --- a/include/asm-arm/arch-l7200/aux_reg.h +++ b/include/asm-arm/arch-l7200/aux_reg.h @@ -9,7 +9,7 @@ #ifndef _ASM_ARCH_AUXREG_H #define _ASM_ARCH_AUXREG_H -#include +#include #define l7200aux_reg *((volatile unsigned int *) (AUX_BASE)) diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S index 63411d3e9df..d5e7294df1d 100644 --- a/include/asm-arm/arch-l7200/entry-macro.S +++ b/include/asm-arm/arch-l7200/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include .equ irq_base_addr, IO_BASE_2 diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h index 9c4804d1357..6f20962df24 100644 --- a/include/asm-arm/arch-l7200/gp_timers.h +++ b/include/asm-arm/arch-l7200/gp_timers.h @@ -10,7 +10,7 @@ #ifndef _ASM_ARCH_GPTIMERS_H #define _ASM_ARCH_GPTIMERS_H -#include +#include /* * Layout of L7200 general purpose timer registers diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h index 645dbdfb390..e24a10a7ed8 100644 --- a/include/asm-arm/arch-l7200/io.h +++ b/include/asm-arm/arch-l7200/io.h @@ -10,7 +10,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h index 18825cf071b..efef950a5b5 100644 --- a/include/asm-arm/arch-l7200/system.h +++ b/include/asm-arm/arch-l7200/system.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h index 04be2a08863..c5ba0adf4a5 100644 --- a/include/asm-arm/arch-l7200/uncompress.h +++ b/include/asm-arm/arch-l7200/uncompress.h @@ -9,7 +9,7 @@ * 07-26-2000 SJH Removed hard coded baud rate */ -#include +#include #define IO_UART IO_START + 0x00044000 diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S index ffe397250f0..34468e06462 100644 --- a/include/asm-arm/arch-lh7a40x/entry-macro.S +++ b/include/asm-arm/arch-lh7a40x/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include /* In order to allow there to be support for both of the processor diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h index 17bc9409748..8d591d0927c 100644 --- a/include/asm-arm/arch-lh7a40x/io.h +++ b/include/asm-arm/arch-lh7a40x/io.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S index 393d5272e50..e131b44b210 100644 --- a/include/asm-arm/arch-msm/debug-macro.S +++ b/include/asm-arm/arch-msm/debug-macro.S @@ -14,7 +14,7 @@ * */ -#include +#include #include .macro addruart,rx diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h index 7c5544bdd0c..fb31b3aa675 100644 --- a/include/asm-arm/arch-msm/system.h +++ b/include/asm-arm/arch-msm/system.h @@ -13,7 +13,7 @@ * */ -#include +#include void arch_idle(void); diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h index d393e15f5a6..5f13a65e404 100644 --- a/include/asm-arm/arch-mxc/gpio.h +++ b/include/asm-arm/arch-mxc/gpio.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_GPIO_H__ #define __ASM_ARCH_MXC_GPIO_H__ -#include +#include #include /* use gpiolib dispatchers */ diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h index f416130718c..21411efc10f 100644 --- a/include/asm-arm/arch-mxc/irqs.h +++ b/include/asm-arm/arch-mxc/irqs.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ -#include +#include #endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h index 059f83023a1..7e669ee0d63 100644 --- a/include/asm-arm/arch-mxc/memory.h +++ b/include/asm-arm/arch-mxc/memory.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_MXC_MEMORY_H__ #define __ASM_ARCH_MXC_MEMORY_H__ -#include +#include /* * Virtual view <-> DMA view memory address translations diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h index 6cb11f4f1a0..5439fa6cf61 100644 --- a/include/asm-arm/arch-mxc/mxc_timer.h +++ b/include/asm-arm/arch-mxc/mxc_timer.h @@ -24,7 +24,7 @@ #define __PLAT_MXC_TIMER_H #include -#include +#include #ifdef CONFIG_ARCH_IMX #define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h index 59019fa58f8..432e0c84c50 100644 --- a/include/asm-arm/arch-mxc/timex.h +++ b/include/asm-arm/arch-mxc/timex.h @@ -20,6 +20,6 @@ #ifndef __ASM_ARCH_MXC_TIMEX_H__ #define __ASM_ARCH_MXC_TIMEX_H__ -#include /* for CLOCK_TICK_RATE */ +#include /* for CLOCK_TICK_RATE */ #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h index 42cc0cb3fef..18f33b0cdeb 100644 --- a/include/asm-arm/arch-mxc/uncompress.h +++ b/include/asm-arm/arch-mxc/uncompress.h @@ -25,7 +25,7 @@ #define __MXC_BOOT_UNCOMPRESS -#include +#include #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S index 83ad188a084..4115bbdf97a 100644 --- a/include/asm-arm/arch-netx/entry-macro.S +++ b/include/asm-arm/arch-netx/entry-macro.S @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h index 52adf368d76..0624d87e1db 100644 --- a/include/asm-arm/arch-netx/system.h +++ b/include/asm-arm/arch-netx/system.h @@ -20,7 +20,7 @@ #define __ASM_ARCH_SYSTEM_H #include -#include +#include #include "netx-regs.h" static inline void arch_idle(void) diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S index 94680950ee6..c78908d7203 100644 --- a/include/asm-arm/arch-ns9xxx/debug-macro.S +++ b/include/asm-arm/arch-ns9xxx/debug-macro.S @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#include +#include #include diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 2f6c89ddf95..e9d9449d300 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -8,7 +8,7 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#include +#include #include .macro get_irqnr_preamble, base, tmp diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h index 7ee194dc635..b41b31d04f0 100644 --- a/include/asm-arm/arch-ns9xxx/regs-bbu.h +++ b/include/asm-arm/arch-ns9xxx/regs-bbu.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_REGSBBU_H #define __ASM_ARCH_REGSBBU_H -#include +#include /* BBus Utility */ diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h index afa3a9db3e1..6bf1ed2ac3d 100644 --- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h +++ b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_REGSBOARDA9M9750_H #define __ASM_ARCH_REGSBOARDA9M9750_H -#include +#include #define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0)) #define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08) diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h index fb455a0ed84..023f7be6f4c 100644 --- a/include/asm-arm/arch-ns9xxx/regs-mem.h +++ b/include/asm-arm/arch-ns9xxx/regs-mem.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_REGSMEM_H #define __ASM_ARCH_REGSMEM_H -#include +#include /* Memory Module */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h index 956c57cb781..bc82d5ec2a8 100644 --- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h +++ b/include/asm-arm/arch-ns9xxx/regs-sys-common.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_REGSSYSCOMMON_H #define __ASM_ARCH_REGSSYSCOMMON_H -#include +#include /* Interrupt Vector Address Register Level x */ #define SYS_IVA(x) __REG2(0xa09000c4, (x)) diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h index 318b6945afb..821275a88cb 100644 --- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h +++ b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_REGSSYSNS9360_H #define __ASM_ARCH_REGSSYSNS9360_H -#include +#include /* System Control Module */ diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S index 369093a45fc..67ed7839e78 100644 --- a/include/asm-arm/arch-omap/entry-macro.S +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include #include diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 0b13557fd30..449e3568baa 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -34,7 +34,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 7464c694859..afbf1e84646 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -327,6 +327,6 @@ extern void omap_init_irq(void); #endif -#include +#include #endif diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h index 26c78f67dc8..3da459a282b 100644 --- a/include/asm-arm/arch-omap/mcbsp.h +++ b/include/asm-arm/arch-omap/mcbsp.h @@ -27,7 +27,7 @@ #include #include -#include +#include #include #define OMAP730_MCBSP1_BASE 0xfffb1000 diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h index a73a28571fe..f4714b5270d 100644 --- a/include/asm-arm/arch-omap/mtd-xip.h +++ b/include/asm-arm/arch-omap/mtd-xip.h @@ -14,7 +14,7 @@ #ifndef __ARCH_OMAP_MTD_XIP_H__ #define __ARCH_OMAP_MTD_XIP_H__ -#include +#include #define OMAP_MPU_TIMER_BASE (0xfffec500) #define OMAP_MPU_TIMER_OFFSET 0x100 diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h index ac2bfa433f0..176d9d6c258 100644 --- a/include/asm-arm/arch-omap/system.h +++ b/include/asm-arm/arch-omap/system.h @@ -7,7 +7,7 @@ #include #include -#include +#include #ifndef CONFIG_MACH_VOICEBLUE #define voiceblue_reset() do {} while (0) diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h index 6e3da70ab10..17f9d7f9e5a 100644 --- a/include/asm-arm/arch-pnx4008/system.h +++ b/include/asm-arm/arch-pnx4008/system.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include #include #include diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h index ee470a39089..f22ee24a021 100644 --- a/include/asm-arm/arch-pnx4008/timex.h +++ b/include/asm-arm/arch-pnx4008/timex.h @@ -14,7 +14,7 @@ #ifndef __PNX4008_TIMEX_H #define __PNX4008_TIMEX_H -#include +#include #include #define CLOCK_TICK_RATE 1000000 diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S index c145bb01bc8..897d164da22 100644 --- a/include/asm-arm/arch-pxa/entry-macro.S +++ b/include/asm-arm/arch-pxa/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h index bdbf5f9ffdd..2c1e3d8ad7a 100644 --- a/include/asm-arm/arch-pxa/gpio.h +++ b/include/asm-arm/arch-pxa/gpio.h @@ -26,7 +26,7 @@ #include #include -#include +#include #include diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h index 7f8d817b446..af34e0f2f7d 100644 --- a/include/asm-arm/arch-pxa/io.h +++ b/include/asm-arm/arch-pxa/io.h @@ -6,7 +6,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S index cd26306d8e5..31a39a7cdaa 100644 --- a/include/asm-arm/arch-realview/entry-macro.S +++ b/include/asm-arm/arch-realview/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h index 6f3d0ce0ca1..bff3d3fcf84 100644 --- a/include/asm-arm/arch-realview/system.h +++ b/include/asm-arm/arch-realview/system.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include #include #include diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h index 4c905d7a13a..3f7ae2e0260 100644 --- a/include/asm-arm/arch-realview/uncompress.h +++ b/include/asm-arm/arch-realview/uncompress.h @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include #include #include diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S index 038b761fdad..5bd55557ccc 100644 --- a/include/asm-arm/arch-rpc/entry-macro.S +++ b/include/asm-arm/arch-rpc/entry-macro.S @@ -1,4 +1,4 @@ -#include +#include #include .equ ioc_base_high, IOC_BASE & 0xff000000 diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h index 6bd2295c0e0..0d10d4591a4 100644 --- a/include/asm-arm/arch-rpc/io.h +++ b/include/asm-arm/arch-rpc/io.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h index 729c2ae4b51..ca3277d1d5e 100644 --- a/include/asm-arm/arch-rpc/system.h +++ b/include/asm-arm/arch-rpc/system.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h index b8e29efd8c5..844e4d469fb 100644 --- a/include/asm-arm/arch-rpc/uncompress.h +++ b/include/asm-arm/arch-rpc/uncompress.h @@ -9,7 +9,7 @@ */ #define VIDMEM ((char *)SCREEN_START) -#include +#include #include #include #include diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index 4f291d9b7d9..86eaa0c2dc1 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -14,7 +14,7 @@ #define __ASM_ARCH_DMA_H __FILE__ #include -#include +#include /* * This is the maximum DMA address(physical address) that can be DMAd to. diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S index bbec0a8ff15..f70d051b267 100644 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -19,7 +19,7 @@ #define INTPND (0x10) #define INTOFFSET (0x14) -#include +#include #include .macro get_irqnr_preamble, base, tmp diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h index 29592c3ebf2..6dd10be4314 100644 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -13,10 +13,6 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#ifndef __ASM_HARDWARE_H -#error "Do not include this directly, instead #include " -#endif - #ifndef __ASSEMBLY__ /* external functions for GPIO support diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h index 6b35a4f2630..3756c993776 100644 --- a/include/asm-arm/arch-s3c2410/io.h +++ b/include/asm-arm/arch-s3c2410/io.h @@ -9,7 +9,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h index 1615bce0c02..beeec770dcf 100644 --- a/include/asm-arm/arch-s3c2410/system-reset.h +++ b/include/asm-arm/arch-s3c2410/system-reset.h @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index ad258085e53..98f690e7d33 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/include/asm-arm/arch-sa1100/badge4.h b/include/asm-arm/arch-sa1100/badge4.h index 8d7a671492d..d93a9a83b25 100644 --- a/include/asm-arm/arch-sa1100/badge4.h +++ b/include/asm-arm/arch-sa1100/badge4.h @@ -13,7 +13,7 @@ */ #ifndef __ASM_ARCH_HARDWARE_H -#error "include instead" +#error "include instead" #endif #define BADGE4_SA1111_BASE (0x48000000) diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S index 267c317a740..1b7753654bd 100644 --- a/include/asm-arm/arch-sa1100/debug-macro.S +++ b/include/asm-arm/arch-sa1100/debug-macro.S @@ -10,7 +10,7 @@ * published by the Free Software Foundation. * */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h index 93d3395b102..e66ecf74e80 100644 --- a/include/asm-arm/arch-sa1100/gpio.h +++ b/include/asm-arm/arch-sa1100/gpio.h @@ -24,7 +24,7 @@ #ifndef __ASM_ARCH_SA1100_GPIO_H #define __ASM_ARCH_SA1100_GPIO_H -#include +#include #include #include diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h index 193f6c15f4d..24972f30195 100644 --- a/include/asm-arm/arch-sa1100/ide.h +++ b/include/asm-arm/arch-sa1100/ide.h @@ -10,7 +10,7 @@ */ #include -#include +#include #include #error "This code is broken and needs update to match with current ide support" diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h index aef91e3b63f..63375a0c014 100644 --- a/include/asm-arm/arch-sa1100/system.h +++ b/include/asm-arm/arch-sa1100/system.h @@ -3,7 +3,7 @@ * * Copyright (c) 1999 Nicolas Pitre */ -#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h index 87ffa27f296..b11d7860a9d 100644 --- a/include/asm-arm/arch-shark/io.h +++ b/include/asm-arm/arch-shark/io.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S index 924d1a8fe36..cd114169c3e 100644 --- a/include/asm-arm/arch-versatile/entry-macro.S +++ b/include/asm-arm/arch-versatile/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h index 71c6254c0d9..3ea4e07b58c 100644 --- a/include/asm-arm/arch-versatile/system.h +++ b/include/asm-arm/arch-versatile/system.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include #include #include -- cgit v1.2.3 From a09e64fbc0094e3073dbb09c3b4bfe4ab669244b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 5 Aug 2008 16:14:15 +0100 Subject: [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King --- include/asm-arm/arch-aaec2000/aaec2000.h | 207 -- include/asm-arm/arch-aaec2000/aaed2000.h | 40 - include/asm-arm/arch-aaec2000/debug-macro.S | 37 - include/asm-arm/arch-aaec2000/dma.h | 9 - include/asm-arm/arch-aaec2000/entry-macro.S | 40 - include/asm-arm/arch-aaec2000/hardware.h | 50 - include/asm-arm/arch-aaec2000/io.h | 20 - include/asm-arm/arch-aaec2000/irqs.h | 46 - include/asm-arm/arch-aaec2000/memory.h | 30 - include/asm-arm/arch-aaec2000/system.h | 24 - include/asm-arm/arch-aaec2000/timex.h | 18 - include/asm-arm/arch-aaec2000/uncompress.h | 46 - include/asm-arm/arch-aaec2000/vmalloc.h | 16 - include/asm-arm/arch-at91/at91_adc.h | 61 - include/asm-arm/arch-at91/at91_aic.h | 53 - include/asm-arm/arch-at91/at91_dbgu.h | 66 - include/asm-arm/arch-at91/at91_mci.h | 113 -- include/asm-arm/arch-at91/at91_pio.h | 49 - include/asm-arm/arch-at91/at91_pit.h | 29 - include/asm-arm/arch-at91/at91_pmc.h | 111 -- include/asm-arm/arch-at91/at91_rstc.h | 38 - include/asm-arm/arch-at91/at91_rtc.h | 75 - include/asm-arm/arch-at91/at91_rtt.h | 32 - include/asm-arm/arch-at91/at91_shdwc.h | 35 - include/asm-arm/arch-at91/at91_spi.h | 81 - include/asm-arm/arch-at91/at91_ssc.h | 106 - include/asm-arm/arch-at91/at91_st.h | 49 - include/asm-arm/arch-at91/at91_tc.h | 146 -- include/asm-arm/arch-at91/at91_twi.h | 68 - include/asm-arm/arch-at91/at91_wdt.h | 34 - include/asm-arm/arch-at91/at91cap9.h | 126 -- include/asm-arm/arch-at91/at91cap9_ddrsdr.h | 100 - include/asm-arm/arch-at91/at91cap9_matrix.h | 137 -- include/asm-arm/arch-at91/at91rm9200.h | 115 -- include/asm-arm/arch-at91/at91rm9200_emac.h | 138 -- include/asm-arm/arch-at91/at91rm9200_mc.h | 160 -- include/asm-arm/arch-at91/at91sam9260.h | 138 -- include/asm-arm/arch-at91/at91sam9260_matrix.h | 78 - include/asm-arm/arch-at91/at91sam9261.h | 105 - include/asm-arm/arch-at91/at91sam9261_matrix.h | 62 - include/asm-arm/arch-at91/at91sam9263.h | 127 -- include/asm-arm/arch-at91/at91sam9263_matrix.h | 129 -- include/asm-arm/arch-at91/at91sam9_sdramc.h | 83 - include/asm-arm/arch-at91/at91sam9_smc.h | 73 - include/asm-arm/arch-at91/at91sam9rl.h | 115 -- include/asm-arm/arch-at91/at91sam9rl_matrix.h | 96 - include/asm-arm/arch-at91/at91x40.h | 55 - include/asm-arm/arch-at91/board.h | 172 -- include/asm-arm/arch-at91/cpu.h | 103 - include/asm-arm/arch-at91/debug-macro.S | 39 - include/asm-arm/arch-at91/dma.h | 19 - include/asm-arm/arch-at91/entry-macro.S | 32 - include/asm-arm/arch-at91/gpio.h | 252 --- include/asm-arm/arch-at91/hardware.h | 92 - include/asm-arm/arch-at91/io.h | 48 - include/asm-arm/arch-at91/irqs.h | 48 - include/asm-arm/arch-at91/memory.h | 39 - include/asm-arm/arch-at91/system.h | 53 - include/asm-arm/arch-at91/timex.h | 77 - include/asm-arm/arch-at91/uncompress.h | 76 - include/asm-arm/arch-at91/vmalloc.h | 26 - include/asm-arm/arch-cl7500/acornfb.h | 33 - include/asm-arm/arch-cl7500/debug-macro.S | 21 - include/asm-arm/arch-cl7500/dma.h | 21 - include/asm-arm/arch-cl7500/entry-macro.S | 16 - include/asm-arm/arch-cl7500/hardware.h | 67 - include/asm-arm/arch-cl7500/io.h | 255 --- include/asm-arm/arch-cl7500/irq.h | 32 - include/asm-arm/arch-cl7500/irqs.h | 66 - include/asm-arm/arch-cl7500/memory.h | 35 - include/asm-arm/arch-cl7500/system.h | 23 - include/asm-arm/arch-cl7500/timex.h | 13 - include/asm-arm/arch-cl7500/uncompress.h | 35 - include/asm-arm/arch-cl7500/vmalloc.h | 4 - include/asm-arm/arch-clps711x/autcpu12.h | 78 - include/asm-arm/arch-clps711x/debug-macro.S | 46 - include/asm-arm/arch-clps711x/dma.h | 19 - include/asm-arm/arch-clps711x/entry-macro.S | 58 - include/asm-arm/arch-clps711x/hardware.h | 237 --- include/asm-arm/arch-clps711x/io.h | 38 - include/asm-arm/arch-clps711x/irqs.h | 53 - include/asm-arm/arch-clps711x/memory.h | 94 - include/asm-arm/arch-clps711x/syspld.h | 121 -- include/asm-arm/arch-clps711x/system.h | 40 - include/asm-arm/arch-clps711x/time.h | 49 - include/asm-arm/arch-clps711x/timex.h | 23 - include/asm-arm/arch-clps711x/uncompress.h | 59 - include/asm-arm/arch-clps711x/vmalloc.h | 20 - include/asm-arm/arch-davinci/clock.h | 22 - include/asm-arm/arch-davinci/common.h | 19 - include/asm-arm/arch-davinci/debug-macro.S | 21 - include/asm-arm/arch-davinci/dma.h | 16 - include/asm-arm/arch-davinci/entry-macro.S | 32 - include/asm-arm/arch-davinci/gpio.h | 159 -- include/asm-arm/arch-davinci/hardware.h | 52 - include/asm-arm/arch-davinci/i2c.h | 21 - include/asm-arm/arch-davinci/io.h | 79 - include/asm-arm/arch-davinci/irqs.h | 105 - include/asm-arm/arch-davinci/memory.h | 64 - include/asm-arm/arch-davinci/mux.h | 55 - include/asm-arm/arch-davinci/psc.h | 76 - include/asm-arm/arch-davinci/serial.h | 20 - include/asm-arm/arch-davinci/system.h | 29 - include/asm-arm/arch-davinci/timex.h | 17 - include/asm-arm/arch-davinci/uncompress.h | 35 - include/asm-arm/arch-davinci/vmalloc.h | 15 - include/asm-arm/arch-ebsa110/debug-macro.S | 21 - include/asm-arm/arch-ebsa110/dma.h | 11 - include/asm-arm/arch-ebsa110/entry-macro.S | 39 - include/asm-arm/arch-ebsa110/hardware.h | 63 - include/asm-arm/arch-ebsa110/io.h | 92 - include/asm-arm/arch-ebsa110/irqs.h | 20 - include/asm-arm/arch-ebsa110/memory.h | 37 - include/asm-arm/arch-ebsa110/system.h | 39 - include/asm-arm/arch-ebsa110/timex.h | 19 - include/asm-arm/arch-ebsa110/uncompress.h | 45 - include/asm-arm/arch-ebsa110/vmalloc.h | 10 - include/asm-arm/arch-ebsa285/debug-macro.S | 57 - include/asm-arm/arch-ebsa285/dma.h | 25 - include/asm-arm/arch-ebsa285/entry-macro.S | 113 -- include/asm-arm/arch-ebsa285/hardware.h | 105 - include/asm-arm/arch-ebsa285/io.h | 39 - include/asm-arm/arch-ebsa285/irqs.h | 98 - include/asm-arm/arch-ebsa285/memory.h | 67 - include/asm-arm/arch-ebsa285/system.h | 69 - include/asm-arm/arch-ebsa285/timex.h | 18 - include/asm-arm/arch-ebsa285/uncompress.h | 38 - include/asm-arm/arch-ebsa285/vmalloc.h | 10 - include/asm-arm/arch-ep93xx/debug-macro.S | 22 - include/asm-arm/arch-ep93xx/dma.h | 3 - include/asm-arm/arch-ep93xx/entry-macro.S | 59 - include/asm-arm/arch-ep93xx/ep93xx-regs.h | 133 -- include/asm-arm/arch-ep93xx/gesbc9312.h | 3 - include/asm-arm/arch-ep93xx/gpio.h | 128 -- include/asm-arm/arch-ep93xx/hardware.h | 16 - include/asm-arm/arch-ep93xx/io.h | 8 - include/asm-arm/arch-ep93xx/irqs.h | 78 - include/asm-arm/arch-ep93xx/memory.h | 14 - include/asm-arm/arch-ep93xx/platform.h | 20 - include/asm-arm/arch-ep93xx/system.h | 26 - include/asm-arm/arch-ep93xx/timex.h | 5 - include/asm-arm/arch-ep93xx/ts72xx.h | 101 - include/asm-arm/arch-ep93xx/uncompress.h | 85 - include/asm-arm/arch-ep93xx/vmalloc.h | 5 - include/asm-arm/arch-h720x/boards.h | 53 - include/asm-arm/arch-h720x/debug-macro.S | 40 - include/asm-arm/arch-h720x/dma.h | 26 - include/asm-arm/arch-h720x/entry-macro.S | 66 - include/asm-arm/arch-h720x/h7201-regs.h | 67 - include/asm-arm/arch-h720x/h7202-regs.h | 155 -- include/asm-arm/arch-h720x/hardware.h | 192 -- include/asm-arm/arch-h720x/io.h | 24 - include/asm-arm/arch-h720x/irqs.h | 116 -- include/asm-arm/arch-h720x/memory.h | 29 - include/asm-arm/arch-h720x/system.h | 33 - include/asm-arm/arch-h720x/timex.h | 15 - include/asm-arm/arch-h720x/uncompress.h | 37 - include/asm-arm/arch-h720x/vmalloc.h | 10 - include/asm-arm/arch-imx/debug-macro.S | 34 - include/asm-arm/arch-imx/dma.h | 56 - include/asm-arm/arch-imx/entry-macro.S | 32 - include/asm-arm/arch-imx/gpio.h | 102 - include/asm-arm/arch-imx/hardware.h | 91 - include/asm-arm/arch-imx/imx-dma.h | 94 - include/asm-arm/arch-imx/imx-regs.h | 482 ----- include/asm-arm/arch-imx/imx-uart.h | 12 - include/asm-arm/arch-imx/imxfb.h | 37 - include/asm-arm/arch-imx/io.h | 30 - include/asm-arm/arch-imx/irqs.h | 116 -- include/asm-arm/arch-imx/memory.h | 36 - include/asm-arm/arch-imx/mmc.h | 15 - include/asm-arm/arch-imx/mx1ads.h | 36 - include/asm-arm/arch-imx/spi_imx.h | 72 - include/asm-arm/arch-imx/system.h | 40 - include/asm-arm/arch-imx/timex.h | 26 - include/asm-arm/arch-imx/uncompress.h | 71 - include/asm-arm/arch-imx/vmalloc.h | 20 - include/asm-arm/arch-integrator/bits.h | 61 - include/asm-arm/arch-integrator/cm.h | 36 - include/asm-arm/arch-integrator/debug-macro.S | 22 - include/asm-arm/arch-integrator/dma.h | 19 - include/asm-arm/arch-integrator/entry-macro.S | 44 - include/asm-arm/arch-integrator/hardware.h | 48 - include/asm-arm/arch-integrator/impd1.h | 18 - include/asm-arm/arch-integrator/io.h | 36 - include/asm-arm/arch-integrator/irqs.h | 82 - include/asm-arm/arch-integrator/lm.h | 23 - include/asm-arm/arch-integrator/memory.h | 39 - include/asm-arm/arch-integrator/platform.h | 469 ----- include/asm-arm/arch-integrator/system.h | 44 - include/asm-arm/arch-integrator/timex.h | 26 - include/asm-arm/arch-integrator/uncompress.h | 50 - include/asm-arm/arch-integrator/vmalloc.h | 20 - include/asm-arm/arch-iop13xx/adma.h | 537 ----- include/asm-arm/arch-iop13xx/debug-macro.S | 26 - include/asm-arm/arch-iop13xx/dma.h | 3 - include/asm-arm/arch-iop13xx/entry-macro.S | 45 - include/asm-arm/arch-iop13xx/hardware.h | 28 - include/asm-arm/arch-iop13xx/io.h | 41 - include/asm-arm/arch-iop13xx/iop13xx.h | 526 ----- include/asm-arm/arch-iop13xx/iq81340.h | 28 - include/asm-arm/arch-iop13xx/irqs.h | 196 -- include/asm-arm/arch-iop13xx/memory.h | 64 - include/asm-arm/arch-iop13xx/msi.h | 11 - include/asm-arm/arch-iop13xx/pci.h | 57 - include/asm-arm/arch-iop13xx/system.h | 27 - include/asm-arm/arch-iop13xx/time.h | 107 - include/asm-arm/arch-iop13xx/timex.h | 3 - include/asm-arm/arch-iop13xx/uncompress.h | 23 - include/asm-arm/arch-iop13xx/vmalloc.h | 4 - include/asm-arm/arch-iop32x/adma.h | 5 - include/asm-arm/arch-iop32x/debug-macro.S | 20 - include/asm-arm/arch-iop32x/dma.h | 9 - include/asm-arm/arch-iop32x/entry-macro.S | 36 - include/asm-arm/arch-iop32x/glantank.h | 13 - include/asm-arm/arch-iop32x/gpio.h | 6 - include/asm-arm/arch-iop32x/hardware.h | 44 - include/asm-arm/arch-iop32x/io.h | 27 - include/asm-arm/arch-iop32x/iop32x.h | 37 - include/asm-arm/arch-iop32x/iq31244.h | 17 - include/asm-arm/arch-iop32x/iq80321.h | 17 - include/asm-arm/arch-iop32x/irqs.h | 50 - include/asm-arm/arch-iop32x/memory.h | 26 - include/asm-arm/arch-iop32x/n2100.h | 19 - include/asm-arm/arch-iop32x/system.h | 33 - include/asm-arm/arch-iop32x/time.h | 4 - include/asm-arm/arch-iop32x/timex.h | 9 - include/asm-arm/arch-iop32x/uncompress.h | 39 - include/asm-arm/arch-iop32x/vmalloc.h | 5 - include/asm-arm/arch-iop33x/adma.h | 5 - include/asm-arm/arch-iop33x/debug-macro.S | 24 - include/asm-arm/arch-iop33x/dma.h | 9 - include/asm-arm/arch-iop33x/entry-macro.S | 37 - include/asm-arm/arch-iop33x/gpio.h | 6 - include/asm-arm/arch-iop33x/hardware.h | 46 - include/asm-arm/arch-iop33x/io.h | 27 - include/asm-arm/arch-iop33x/iop33x.h | 43 - include/asm-arm/arch-iop33x/iq80331.h | 16 - include/asm-arm/arch-iop33x/iq80332.h | 16 - include/asm-arm/arch-iop33x/irqs.h | 60 - include/asm-arm/arch-iop33x/memory.h | 26 - include/asm-arm/arch-iop33x/system.h | 22 - include/asm-arm/arch-iop33x/time.h | 4 - include/asm-arm/arch-iop33x/timex.h | 9 - include/asm-arm/arch-iop33x/uncompress.h | 37 - include/asm-arm/arch-iop33x/vmalloc.h | 5 - include/asm-arm/arch-ixp2000/debug-macro.S | 27 - include/asm-arm/arch-ixp2000/dma.h | 9 - include/asm-arm/arch-ixp2000/enp2611.h | 46 - include/asm-arm/arch-ixp2000/entry-macro.S | 60 - include/asm-arm/arch-ixp2000/gpio.h | 48 - include/asm-arm/arch-ixp2000/hardware.h | 44 - include/asm-arm/arch-ixp2000/io.h | 134 -- include/asm-arm/arch-ixp2000/irqs.h | 207 -- include/asm-arm/arch-ixp2000/ixdp2x00.h | 92 - include/asm-arm/arch-ixp2000/ixdp2x01.h | 57 - include/asm-arm/arch-ixp2000/ixp2000-regs.h | 457 ----- include/asm-arm/arch-ixp2000/memory.h | 34 - include/asm-arm/arch-ixp2000/platform.h | 152 -- include/asm-arm/arch-ixp2000/system.h | 49 - include/asm-arm/arch-ixp2000/timex.h | 13 - include/asm-arm/arch-ixp2000/uncompress.h | 47 - include/asm-arm/arch-ixp2000/vmalloc.h | 20 - include/asm-arm/arch-ixp23xx/debug-macro.S | 26 - include/asm-arm/arch-ixp23xx/dma.h | 3 - include/asm-arm/arch-ixp23xx/entry-macro.S | 37 - include/asm-arm/arch-ixp23xx/hardware.h | 37 - include/asm-arm/arch-ixp23xx/io.h | 54 - include/asm-arm/arch-ixp23xx/irqs.h | 223 --- include/asm-arm/arch-ixp23xx/ixdp2351.h | 89 - include/asm-arm/arch-ixp23xx/ixp23xx.h | 298 --- include/asm-arm/arch-ixp23xx/memory.h | 48 - include/asm-arm/arch-ixp23xx/platform.h | 57 - include/asm-arm/arch-ixp23xx/system.h | 33 - include/asm-arm/arch-ixp23xx/time.h | 3 - include/asm-arm/arch-ixp23xx/timex.h | 7 - include/asm-arm/arch-ixp23xx/uncompress.h | 40 - include/asm-arm/arch-ixp23xx/vmalloc.h | 10 - include/asm-arm/arch-ixp4xx/avila.h | 39 - include/asm-arm/arch-ixp4xx/coyote.h | 33 - include/asm-arm/arch-ixp4xx/cpu.h | 46 - include/asm-arm/arch-ixp4xx/debug-macro.S | 24 - include/asm-arm/arch-ixp4xx/dma.h | 21 - include/asm-arm/arch-ixp4xx/dsmg600.h | 52 - include/asm-arm/arch-ixp4xx/entry-macro.S | 47 - include/asm-arm/arch-ixp4xx/fsg.h | 50 - include/asm-arm/arch-ixp4xx/gpio.h | 73 - include/asm-arm/arch-ixp4xx/gtwx5715.h | 116 -- include/asm-arm/arch-ixp4xx/hardware.h | 50 - include/asm-arm/arch-ixp4xx/io.h | 569 ------ include/asm-arm/arch-ixp4xx/irqs.h | 138 -- include/asm-arm/arch-ixp4xx/ixdp425.h | 39 - include/asm-arm/arch-ixp4xx/ixp4xx-regs.h | 638 ------ include/asm-arm/arch-ixp4xx/memory.h | 40 - include/asm-arm/arch-ixp4xx/nas100d.h | 52 - include/asm-arm/arch-ixp4xx/npe.h | 39 - include/asm-arm/arch-ixp4xx/nslu2.h | 55 - include/asm-arm/arch-ixp4xx/platform.h | 173 -- include/asm-arm/arch-ixp4xx/prpmc1100.h | 33 - include/asm-arm/arch-ixp4xx/qmgr.h | 126 -- include/asm-arm/arch-ixp4xx/system.h | 42 - include/asm-arm/arch-ixp4xx/timex.h | 15 - include/asm-arm/arch-ixp4xx/udc.h | 8 - include/asm-arm/arch-ixp4xx/uncompress.h | 57 - include/asm-arm/arch-ixp4xx/vmalloc.h | 5 - include/asm-arm/arch-kirkwood/debug-macro.S | 20 - include/asm-arm/arch-kirkwood/dma.h | 1 - include/asm-arm/arch-kirkwood/entry-macro.S | 40 - include/asm-arm/arch-kirkwood/hardware.h | 21 - include/asm-arm/arch-kirkwood/io.h | 26 - include/asm-arm/arch-kirkwood/irqs.h | 63 - include/asm-arm/arch-kirkwood/kirkwood.h | 100 - include/asm-arm/arch-kirkwood/memory.h | 14 - include/asm-arm/arch-kirkwood/system.h | 37 - include/asm-arm/arch-kirkwood/timex.h | 11 - include/asm-arm/arch-kirkwood/uncompress.h | 47 - include/asm-arm/arch-kirkwood/vmalloc.h | 5 - include/asm-arm/arch-ks8695/debug-macro.S | 38 - include/asm-arm/arch-ks8695/devices.h | 37 - include/asm-arm/arch-ks8695/dma.h | 17 - include/asm-arm/arch-ks8695/entry-macro.S | 53 - include/asm-arm/arch-ks8695/gpio.h | 79 - include/asm-arm/arch-ks8695/hardware.h | 49 - include/asm-arm/arch-ks8695/io.h | 19 - include/asm-arm/arch-ks8695/irqs.h | 54 - include/asm-arm/arch-ks8695/memory.h | 49 - include/asm-arm/arch-ks8695/regs-gpio.h | 55 - include/asm-arm/arch-ks8695/regs-hpna.h | 25 - include/asm-arm/arch-ks8695/regs-irq.h | 41 - include/asm-arm/arch-ks8695/regs-lan.h | 65 - include/asm-arm/arch-ks8695/regs-mem.h | 89 - include/asm-arm/arch-ks8695/regs-misc.h | 97 - include/asm-arm/arch-ks8695/regs-pci.h | 53 - include/asm-arm/arch-ks8695/regs-switch.h | 66 - include/asm-arm/arch-ks8695/regs-sys.h | 34 - include/asm-arm/arch-ks8695/regs-timer.h | 40 - include/asm-arm/arch-ks8695/regs-uart.h | 92 - include/asm-arm/arch-ks8695/regs-wan.h | 65 - include/asm-arm/arch-ks8695/system.h | 48 - include/asm-arm/arch-ks8695/timex.h | 20 - include/asm-arm/arch-ks8695/uncompress.h | 37 - include/asm-arm/arch-ks8695/vmalloc.h | 19 - include/asm-arm/arch-l7200/aux_reg.h | 28 - include/asm-arm/arch-l7200/debug-macro.S | 40 - include/asm-arm/arch-l7200/dma.h | 23 - include/asm-arm/arch-l7200/entry-macro.S | 35 - include/asm-arm/arch-l7200/gp_timers.h | 42 - include/asm-arm/arch-l7200/gpio.h | 105 - include/asm-arm/arch-l7200/hardware.h | 57 - include/asm-arm/arch-l7200/io.h | 27 - include/asm-arm/arch-l7200/irqs.h | 56 - include/asm-arm/arch-l7200/memory.h | 29 - include/asm-arm/arch-l7200/pmpcon.h | 46 - include/asm-arm/arch-l7200/pmu.h | 125 -- include/asm-arm/arch-l7200/serial.h | 37 - include/asm-arm/arch-l7200/serial_l7200.h | 101 - include/asm-arm/arch-l7200/sib.h | 119 -- include/asm-arm/arch-l7200/sys-clock.h | 67 - include/asm-arm/arch-l7200/system.h | 29 - include/asm-arm/arch-l7200/time.h | 73 - include/asm-arm/arch-l7200/timex.h | 20 - include/asm-arm/arch-l7200/uncompress.h | 39 - include/asm-arm/arch-l7200/vmalloc.h | 4 - include/asm-arm/arch-lh7a40x/clocks.h | 18 - include/asm-arm/arch-lh7a40x/constants.h | 91 - include/asm-arm/arch-lh7a40x/debug-macro.S | 39 - include/asm-arm/arch-lh7a40x/dma.h | 86 - include/asm-arm/arch-lh7a40x/entry-macro.S | 149 -- include/asm-arm/arch-lh7a40x/hardware.h | 62 - include/asm-arm/arch-lh7a40x/io.h | 22 - include/asm-arm/arch-lh7a40x/irqs.h | 200 -- include/asm-arm/arch-lh7a40x/memory.h | 76 - include/asm-arm/arch-lh7a40x/registers.h | 224 --- include/asm-arm/arch-lh7a40x/ssp.h | 71 - include/asm-arm/arch-lh7a40x/system.h | 19 - include/asm-arm/arch-lh7a40x/timex.h | 17 - include/asm-arm/arch-lh7a40x/uncompress.h | 38 - include/asm-arm/arch-lh7a40x/vmalloc.h | 10 - include/asm-arm/arch-loki/debug-macro.S | 20 - include/asm-arm/arch-loki/dma.h | 1 - include/asm-arm/arch-loki/entry-macro.S | 30 - include/asm-arm/arch-loki/hardware.h | 15 - include/asm-arm/arch-loki/io.h | 26 - include/asm-arm/arch-loki/irqs.h | 58 - include/asm-arm/arch-loki/loki.h | 97 - include/asm-arm/arch-loki/memory.h | 14 - include/asm-arm/arch-loki/system.h | 37 - include/asm-arm/arch-loki/timex.h | 11 - include/asm-arm/arch-loki/uncompress.h | 47 - include/asm-arm/arch-loki/vmalloc.h | 5 - include/asm-arm/arch-msm/board.h | 37 - include/asm-arm/arch-msm/debug-macro.S | 40 - include/asm-arm/arch-msm/dma.h | 151 -- include/asm-arm/arch-msm/entry-macro.S | 38 - include/asm-arm/arch-msm/hardware.h | 18 - include/asm-arm/arch-msm/io.h | 33 - include/asm-arm/arch-msm/irqs.h | 90 - include/asm-arm/arch-msm/memory.h | 27 - include/asm-arm/arch-msm/msm_iomap.h | 104 - include/asm-arm/arch-msm/system.h | 23 - include/asm-arm/arch-msm/timex.h | 21 - include/asm-arm/arch-msm/uncompress.h | 36 - include/asm-arm/arch-msm/vmalloc.h | 22 - include/asm-arm/arch-mv78xx0/debug-macro.S | 20 - include/asm-arm/arch-mv78xx0/dma.h | 1 - include/asm-arm/arch-mv78xx0/entry-macro.S | 39 - include/asm-arm/arch-mv78xx0/hardware.h | 21 - include/asm-arm/arch-mv78xx0/io.h | 26 - include/asm-arm/arch-mv78xx0/irqs.h | 91 - include/asm-arm/arch-mv78xx0/memory.h | 14 - include/asm-arm/arch-mv78xx0/mv78xx0.h | 126 -- include/asm-arm/arch-mv78xx0/system.h | 37 - include/asm-arm/arch-mv78xx0/timex.h | 9 - include/asm-arm/arch-mv78xx0/uncompress.h | 47 - include/asm-arm/arch-mv78xx0/vmalloc.h | 5 - include/asm-arm/arch-mxc/board-mx27ads.h | 354 ---- include/asm-arm/arch-mxc/board-mx31ads.h | 117 -- include/asm-arm/arch-mxc/board-mx31lite.h | 38 - include/asm-arm/arch-mxc/board-pcm037.h | 27 - include/asm-arm/arch-mxc/board-pcm038.h | 41 - include/asm-arm/arch-mxc/clock.h | 67 - include/asm-arm/arch-mxc/common.h | 20 - include/asm-arm/arch-mxc/debug-macro.S | 49 - include/asm-arm/arch-mxc/dma.h | 14 - include/asm-arm/arch-mxc/entry-macro.S | 39 - include/asm-arm/arch-mxc/gpio.h | 42 - include/asm-arm/arch-mxc/hardware.h | 37 - include/asm-arm/arch-mxc/iim.h | 77 - include/asm-arm/arch-mxc/imx-uart.h | 32 - include/asm-arm/arch-mxc/io.h | 22 - include/asm-arm/arch-mxc/iomux-mx1-mx2.h | 372 ---- include/asm-arm/arch-mxc/iomux-mx3.h | 501 ----- include/asm-arm/arch-mxc/irqs.h | 16 - include/asm-arm/arch-mxc/memory.h | 29 - include/asm-arm/arch-mxc/mx27.h | 302 --- include/asm-arm/arch-mxc/mx31.h | 384 ---- include/asm-arm/arch-mxc/mxc.h | 36 - include/asm-arm/arch-mxc/mxc_timer.h | 158 -- include/asm-arm/arch-mxc/system.h | 34 - include/asm-arm/arch-mxc/timex.h | 25 - include/asm-arm/arch-mxc/uncompress.h | 78 - include/asm-arm/arch-mxc/vmalloc.h | 26 - include/asm-arm/arch-netx/debug-macro.S | 38 - include/asm-arm/arch-netx/dma.h | 21 - include/asm-arm/arch-netx/entry-macro.S | 41 - include/asm-arm/arch-netx/eth.h | 27 - include/asm-arm/arch-netx/hardware.h | 39 - include/asm-arm/arch-netx/io.h | 28 - include/asm-arm/arch-netx/irqs.h | 70 - include/asm-arm/arch-netx/memory.h | 36 - include/asm-arm/arch-netx/netx-regs.h | 410 ---- include/asm-arm/arch-netx/param.h | 18 - include/asm-arm/arch-netx/pfifo.h | 54 - include/asm-arm/arch-netx/system.h | 38 - include/asm-arm/arch-netx/timex.h | 20 - include/asm-arm/arch-netx/uncompress.h | 76 - include/asm-arm/arch-netx/vmalloc.h | 19 - include/asm-arm/arch-netx/xc.h | 42 - include/asm-arm/arch-ns9xxx/board.h | 42 - include/asm-arm/arch-ns9xxx/debug-macro.S | 22 - include/asm-arm/arch-ns9xxx/dma.h | 14 - include/asm-arm/arch-ns9xxx/entry-macro.S | 28 - include/asm-arm/arch-ns9xxx/gpio.h | 47 - include/asm-arm/arch-ns9xxx/hardware.h | 79 - include/asm-arm/arch-ns9xxx/io.h | 20 - include/asm-arm/arch-ns9xxx/irqs.h | 86 - include/asm-arm/arch-ns9xxx/memory.h | 27 - include/asm-arm/arch-ns9xxx/module.h | 60 - include/asm-arm/arch-ns9xxx/processor-ns9360.h | 32 - include/asm-arm/arch-ns9xxx/processor.h | 42 - include/asm-arm/arch-ns9xxx/regs-bbu.h | 45 - .../asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h | 24 - include/asm-arm/arch-ns9xxx/regs-mem.h | 135 -- include/asm-arm/arch-ns9xxx/regs-sys-common.h | 31 - include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h | 148 -- include/asm-arm/arch-ns9xxx/system.h | 35 - include/asm-arm/arch-ns9xxx/timex.h | 20 - include/asm-arm/arch-ns9xxx/uncompress.h | 164 -- include/asm-arm/arch-ns9xxx/vmalloc.h | 16 - include/asm-arm/arch-omap/aic23.h | 116 -- include/asm-arm/arch-omap/blizzard.h | 12 - include/asm-arm/arch-omap/board-2430sdp.h | 39 - include/asm-arm/arch-omap/board-ams-delta.h | 76 - include/asm-arm/arch-omap/board-apollon.h | 38 - include/asm-arm/arch-omap/board-fsample.h | 51 - include/asm-arm/arch-omap/board-h2.h | 41 - include/asm-arm/arch-omap/board-h3.h | 36 - include/asm-arm/arch-omap/board-h4.h | 35 - include/asm-arm/arch-omap/board-innovator.h | 52 - include/asm-arm/arch-omap/board-nokia.h | 54 - include/asm-arm/arch-omap/board-osk.h | 47 - include/asm-arm/arch-omap/board-palmte.h | 32 - include/asm-arm/arch-omap/board-palmtt.h | 23 - include/asm-arm/arch-omap/board-palmz71.h | 26 - include/asm-arm/arch-omap/board-perseus2.h | 39 - include/asm-arm/arch-omap/board-sx1.h | 52 - include/asm-arm/arch-omap/board-voiceblue.h | 20 - include/asm-arm/arch-omap/board.h | 186 -- include/asm-arm/arch-omap/clock.h | 162 -- include/asm-arm/arch-omap/common.h | 69 - include/asm-arm/arch-omap/control.h | 189 -- include/asm-arm/arch-omap/cpu.h | 402 ---- include/asm-arm/arch-omap/debug-macro.S | 58 - include/asm-arm/arch-omap/dma.h | 570 ------ include/asm-arm/arch-omap/dmtimer.h | 84 - include/asm-arm/arch-omap/dsp_common.h | 40 - include/asm-arm/arch-omap/eac.h | 100 - include/asm-arm/arch-omap/entry-macro.S | 89 - include/asm-arm/arch-omap/fpga.h | 197 -- include/asm-arm/arch-omap/gpio-switch.h | 54 - include/asm-arm/arch-omap/gpio.h | 122 -- include/asm-arm/arch-omap/gpioexpander.h | 35 - include/asm-arm/arch-omap/gpmc.h | 96 - include/asm-arm/arch-omap/hardware.h | 355 ---- include/asm-arm/arch-omap/hwa742.h | 12 - include/asm-arm/arch-omap/io.h | 197 -- include/asm-arm/arch-omap/irda.h | 37 - include/asm-arm/arch-omap/irqs.h | 332 ---- include/asm-arm/arch-omap/keypad.h | 39 - include/asm-arm/arch-omap/lcd_mipid.h | 24 - include/asm-arm/arch-omap/led.h | 24 - include/asm-arm/arch-omap/mailbox.h | 73 - include/asm-arm/arch-omap/mcbsp.h | 380 ---- include/asm-arm/arch-omap/mcspi.h | 15 - include/asm-arm/arch-omap/memory.h | 103 - include/asm-arm/arch-omap/menelaus.h | 49 - include/asm-arm/arch-omap/mmc.h | 74 - include/asm-arm/arch-omap/mtd-xip.h | 61 - include/asm-arm/arch-omap/mux.h | 615 ------ include/asm-arm/arch-omap/nand.h | 24 - include/asm-arm/arch-omap/omap-alsa.h | 123 -- include/asm-arm/arch-omap/omap1510.h | 48 - include/asm-arm/arch-omap/omap16xx.h | 197 -- include/asm-arm/arch-omap/omap24xx.h | 107 - include/asm-arm/arch-omap/omap34xx.h | 72 - include/asm-arm/arch-omap/omap730.h | 102 - include/asm-arm/arch-omap/omapfb.h | 395 ---- include/asm-arm/arch-omap/onenand.h | 21 - include/asm-arm/arch-omap/param.h | 8 - include/asm-arm/arch-omap/pm.h | 356 ---- include/asm-arm/arch-omap/prcm.h | 33 - include/asm-arm/arch-omap/sdrc.h | 75 - include/asm-arm/arch-omap/serial.h | 37 - include/asm-arm/arch-omap/sram.h | 56 - include/asm-arm/arch-omap/system.h | 49 - include/asm-arm/arch-omap/tc.h | 106 - include/asm-arm/arch-omap/timex.h | 41 - include/asm-arm/arch-omap/uncompress.h | 83 - include/asm-arm/arch-omap/usb.h | 141 -- include/asm-arm/arch-omap/vmalloc.h | 21 - include/asm-arm/arch-orion5x/debug-macro.S | 22 - include/asm-arm/arch-orion5x/dma.h | 1 - include/asm-arm/arch-orion5x/entry-macro.S | 31 - include/asm-arm/arch-orion5x/gpio.h | 28 - include/asm-arm/arch-orion5x/hardware.h | 21 - include/asm-arm/arch-orion5x/io.h | 63 - include/asm-arm/arch-orion5x/irqs.h | 62 - include/asm-arm/arch-orion5x/memory.h | 16 - include/asm-arm/arch-orion5x/orion5x.h | 162 -- include/asm-arm/arch-orion5x/system.h | 32 - include/asm-arm/arch-orion5x/timex.h | 13 - include/asm-arm/arch-orion5x/uncompress.h | 49 - include/asm-arm/arch-orion5x/vmalloc.h | 5 - include/asm-arm/arch-pnx4008/clock.h | 62 - include/asm-arm/arch-pnx4008/debug-macro.S | 23 - include/asm-arm/arch-pnx4008/dma.h | 162 -- include/asm-arm/arch-pnx4008/entry-macro.S | 127 -- include/asm-arm/arch-pnx4008/gpio.h | 241 --- include/asm-arm/arch-pnx4008/hardware.h | 32 - include/asm-arm/arch-pnx4008/i2c.h | 67 - include/asm-arm/arch-pnx4008/io.h | 21 - include/asm-arm/arch-pnx4008/irq.h | 42 - include/asm-arm/arch-pnx4008/irqs.h | 215 -- include/asm-arm/arch-pnx4008/memory.h | 24 - include/asm-arm/arch-pnx4008/param.h | 21 - include/asm-arm/arch-pnx4008/platform.h | 69 - include/asm-arm/arch-pnx4008/pm.h | 33 - include/asm-arm/arch-pnx4008/system.h | 38 - include/asm-arm/arch-pnx4008/timex.h | 73 - include/asm-arm/arch-pnx4008/uncompress.h | 46 - include/asm-arm/arch-pnx4008/vmalloc.h | 20 - include/asm-arm/arch-pxa/akita.h | 32 - include/asm-arm/arch-pxa/audio.h | 17 - include/asm-arm/arch-pxa/bitfield.h | 113 -- include/asm-arm/arch-pxa/camera.h | 48 - include/asm-arm/arch-pxa/colibri.h | 19 - include/asm-arm/arch-pxa/corgi.h | 109 - include/asm-arm/arch-pxa/debug-macro.S | 25 - include/asm-arm/arch-pxa/dma.h | 50 - include/asm-arm/arch-pxa/entry-macro.S | 57 - include/asm-arm/arch-pxa/eseries-gpio.h | 50 - include/asm-arm/arch-pxa/eseries-irq.h | 27 - include/asm-arm/arch-pxa/gpio.h | 65 - include/asm-arm/arch-pxa/gumstix.h | 96 - include/asm-arm/arch-pxa/hardware.h | 240 --- include/asm-arm/arch-pxa/i2c.h | 77 - include/asm-arm/arch-pxa/idp.h | 199 -- include/asm-arm/arch-pxa/io.h | 20 - include/asm-arm/arch-pxa/irda.h | 23 - include/asm-arm/arch-pxa/irqs.h | 264 --- include/asm-arm/arch-pxa/littleton.h | 6 - include/asm-arm/arch-pxa/lpd270.h | 38 - include/asm-arm/arch-pxa/lubbock.h | 40 - include/asm-arm/arch-pxa/magician.h | 117 -- include/asm-arm/arch-pxa/mainstone.h | 120 -- include/asm-arm/arch-pxa/memory.h | 52 - include/asm-arm/arch-pxa/mfp-pxa25x.h | 161 -- include/asm-arm/arch-pxa/mfp-pxa27x.h | 433 ---- include/asm-arm/arch-pxa/mfp-pxa2xx.h | 133 -- include/asm-arm/arch-pxa/mfp-pxa300.h | 575 ------ include/asm-arm/arch-pxa/mfp-pxa320.h | 447 ----- include/asm-arm/arch-pxa/mfp-pxa3xx.h | 252 --- include/asm-arm/arch-pxa/mfp-pxa930.h | 491 ----- include/asm-arm/arch-pxa/mfp.h | 319 --- include/asm-arm/arch-pxa/mmc.h | 23 - include/asm-arm/arch-pxa/mtd-xip.h | 37 - include/asm-arm/arch-pxa/ohci.h | 20 - include/asm-arm/arch-pxa/palmtx.h | 106 - include/asm-arm/arch-pxa/pcm027.h | 75 - include/asm-arm/arch-pxa/pcm990_baseboard.h | 275 --- include/asm-arm/arch-pxa/pm.h | 27 - include/asm-arm/arch-pxa/poodle.h | 75 - include/asm-arm/arch-pxa/pxa-regs.h | 1070 ---------- include/asm-arm/arch-pxa/pxa25x-udc.h | 163 -- include/asm-arm/arch-pxa/pxa27x-udc.h | 257 --- include/asm-arm/arch-pxa/pxa27x_keypad.h | 58 - include/asm-arm/arch-pxa/pxa2xx-gpio.h | 368 ---- include/asm-arm/arch-pxa/pxa2xx-regs.h | 246 --- include/asm-arm/arch-pxa/pxa2xx_spi.h | 46 - include/asm-arm/arch-pxa/pxa3xx-regs.h | 183 -- include/asm-arm/arch-pxa/pxa3xx_nand.h | 20 - include/asm-arm/arch-pxa/pxafb.h | 151 -- include/asm-arm/arch-pxa/regs-lcd.h | 180 -- include/asm-arm/arch-pxa/regs-ssp.h | 127 -- include/asm-arm/arch-pxa/sharpsl.h | 34 - include/asm-arm/arch-pxa/spitz.h | 158 -- include/asm-arm/arch-pxa/ssp.h | 83 - include/asm-arm/arch-pxa/system.h | 24 - include/asm-arm/arch-pxa/timex.h | 26 - include/asm-arm/arch-pxa/tosa.h | 198 -- include/asm-arm/arch-pxa/tosa_bt.h | 22 - include/asm-arm/arch-pxa/trizeps4.h | 106 - include/asm-arm/arch-pxa/udc.h | 8 - include/asm-arm/arch-pxa/uncompress.h | 45 - include/asm-arm/arch-pxa/vmalloc.h | 11 - include/asm-arm/arch-pxa/zylonite.h | 47 - include/asm-arm/arch-realview/board-eb.h | 191 -- include/asm-arm/arch-realview/board-pb1176.h | 152 -- include/asm-arm/arch-realview/board-pb11mp.h | 186 -- include/asm-arm/arch-realview/debug-macro.S | 22 - include/asm-arm/arch-realview/dma.h | 20 - include/asm-arm/arch-realview/entry-macro.S | 81 - include/asm-arm/arch-realview/hardware.h | 31 - include/asm-arm/arch-realview/io.h | 33 - include/asm-arm/arch-realview/irqs.h | 38 - include/asm-arm/arch-realview/memory.h | 38 - include/asm-arm/arch-realview/platform.h | 293 --- include/asm-arm/arch-realview/scu.h | 13 - include/asm-arm/arch-realview/smp.h | 30 - include/asm-arm/arch-realview/system.h | 51 - include/asm-arm/arch-realview/timex.h | 23 - include/asm-arm/arch-realview/uncompress.h | 72 - include/asm-arm/arch-realview/vmalloc.h | 21 - include/asm-arm/arch-rpc/acornfb.h | 140 -- include/asm-arm/arch-rpc/debug-macro.S | 25 - include/asm-arm/arch-rpc/dma.h | 33 - include/asm-arm/arch-rpc/entry-macro.S | 16 - include/asm-arm/arch-rpc/hardware.h | 83 - include/asm-arm/arch-rpc/io.h | 258 --- include/asm-arm/arch-rpc/irqs.h | 46 - include/asm-arm/arch-rpc/memory.h | 39 - include/asm-arm/arch-rpc/system.h | 27 - include/asm-arm/arch-rpc/timex.h | 17 - include/asm-arm/arch-rpc/uncompress.h | 198 -- include/asm-arm/arch-rpc/vmalloc.h | 10 - include/asm-arm/arch-s3c2400/map.h | 66 - include/asm-arm/arch-s3c2400/memory.h | 23 - include/asm-arm/arch-s3c2410/anubis-cpld.h | 25 - include/asm-arm/arch-s3c2410/anubis-irq.h | 21 - include/asm-arm/arch-s3c2410/anubis-map.h | 38 - include/asm-arm/arch-s3c2410/audio.h | 45 - include/asm-arm/arch-s3c2410/bast-cpld.h | 53 - include/asm-arm/arch-s3c2410/bast-irq.h | 29 - include/asm-arm/arch-s3c2410/bast-map.h | 146 -- include/asm-arm/arch-s3c2410/bast-pmu.h | 40 - include/asm-arm/arch-s3c2410/debug-macro.S | 102 - include/asm-arm/arch-s3c2410/dma.h | 453 ----- include/asm-arm/arch-s3c2410/entry-macro.S | 78 - include/asm-arm/arch-s3c2410/fb.h | 74 - include/asm-arm/arch-s3c2410/gpio.h | 18 - include/asm-arm/arch-s3c2410/h1940-latch.h | 64 - include/asm-arm/arch-s3c2410/h1940.h | 21 - include/asm-arm/arch-s3c2410/hardware.h | 137 -- include/asm-arm/arch-s3c2410/idle.h | 24 - include/asm-arm/arch-s3c2410/io.h | 218 -- include/asm-arm/arch-s3c2410/irqs.h | 166 -- include/asm-arm/arch-s3c2410/leds-gpio.h | 28 - include/asm-arm/arch-s3c2410/map.h | 178 -- include/asm-arm/arch-s3c2410/memory.h | 19 - include/asm-arm/arch-s3c2410/osiris-cpld.h | 30 - include/asm-arm/arch-s3c2410/osiris-map.h | 42 - include/asm-arm/arch-s3c2410/otom-map.h | 30 - include/asm-arm/arch-s3c2410/regs-clock.h | 197 -- include/asm-arm/arch-s3c2410/regs-dsc.h | 184 -- include/asm-arm/arch-s3c2410/regs-gpio.h | 1163 ----------- include/asm-arm/arch-s3c2410/regs-gpioj.h | 106 - include/asm-arm/arch-s3c2410/regs-irq.h | 43 - include/asm-arm/arch-s3c2410/regs-lcd.h | 162 -- include/asm-arm/arch-s3c2410/regs-mem.h | 220 --- include/asm-arm/arch-s3c2410/regs-power.h | 40 - include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h | 29 - include/asm-arm/arch-s3c2410/regs-s3c2412.h | 23 - include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h | 195 -- include/asm-arm/arch-s3c2410/regs-sdi.h | 127 -- include/asm-arm/arch-s3c2410/reset.h | 22 - include/asm-arm/arch-s3c2410/spi-gpio.h | 27 - include/asm-arm/arch-s3c2410/spi.h | 25 - include/asm-arm/arch-s3c2410/system-reset.h | 64 - include/asm-arm/arch-s3c2410/system.h | 58 - include/asm-arm/arch-s3c2410/timex.h | 26 - include/asm-arm/arch-s3c2410/uncompress.h | 52 - include/asm-arm/arch-s3c2410/usb-control.h | 41 - include/asm-arm/arch-s3c2410/vmalloc.h | 20 - include/asm-arm/arch-s3c2410/vr1000-cpld.h | 18 - include/asm-arm/arch-s3c2410/vr1000-irq.h | 26 - include/asm-arm/arch-s3c2410/vr1000-map.h | 110 -- include/asm-arm/arch-sa1100/SA-1100.h | 2072 -------------------- include/asm-arm/arch-sa1100/SA-1101.h | 925 --------- include/asm-arm/arch-sa1100/SA-1111.h | 5 - include/asm-arm/arch-sa1100/assabet.h | 105 - include/asm-arm/arch-sa1100/badge4.h | 75 - include/asm-arm/arch-sa1100/bitfield.h | 113 -- include/asm-arm/arch-sa1100/cerf.h | 28 - include/asm-arm/arch-sa1100/collie.h | 88 - include/asm-arm/arch-sa1100/debug-macro.S | 58 - include/asm-arm/arch-sa1100/dma.h | 117 -- include/asm-arm/arch-sa1100/entry-macro.S | 47 - include/asm-arm/arch-sa1100/gpio.h | 68 - include/asm-arm/arch-sa1100/h3600.h | 169 -- include/asm-arm/arch-sa1100/h3600_gpio.h | 540 ----- include/asm-arm/arch-sa1100/hardware.h | 57 - include/asm-arm/arch-sa1100/ide.h | 75 - include/asm-arm/arch-sa1100/io.h | 26 - include/asm-arm/arch-sa1100/irqs.h | 197 -- include/asm-arm/arch-sa1100/jornada720.h | 27 - include/asm-arm/arch-sa1100/lart.h | 13 - include/asm-arm/arch-sa1100/mcp.h | 21 - include/asm-arm/arch-sa1100/memory.h | 68 - include/asm-arm/arch-sa1100/mtd-xip.h | 26 - include/asm-arm/arch-sa1100/neponset.h | 74 - include/asm-arm/arch-sa1100/shannon.h | 43 - include/asm-arm/arch-sa1100/simpad.h | 112 -- include/asm-arm/arch-sa1100/system.h | 22 - include/asm-arm/arch-sa1100/timex.h | 12 - include/asm-arm/arch-sa1100/uncompress.h | 50 - include/asm-arm/arch-sa1100/vmalloc.h | 4 - include/asm-arm/arch-shark/debug-macro.S | 31 - include/asm-arm/arch-shark/dma.h | 18 - include/asm-arm/arch-shark/entry-macro.S | 41 - include/asm-arm/arch-shark/hardware.h | 51 - include/asm-arm/arch-shark/io.h | 56 - include/asm-arm/arch-shark/irqs.h | 13 - include/asm-arm/arch-shark/memory.h | 48 - include/asm-arm/arch-shark/system.h | 28 - include/asm-arm/arch-shark/timex.h | 7 - include/asm-arm/arch-shark/uncompress.h | 51 - include/asm-arm/arch-shark/vmalloc.h | 4 - include/asm-arm/arch-versatile/debug-macro.S | 23 - include/asm-arm/arch-versatile/dma.h | 20 - include/asm-arm/arch-versatile/entry-macro.S | 44 - include/asm-arm/arch-versatile/hardware.h | 52 - include/asm-arm/arch-versatile/io.h | 32 - include/asm-arm/arch-versatile/irqs.h | 211 -- include/asm-arm/arch-versatile/memory.h | 38 - include/asm-arm/arch-versatile/platform.h | 510 ----- include/asm-arm/arch-versatile/system.h | 49 - include/asm-arm/arch-versatile/timex.h | 23 - include/asm-arm/arch-versatile/uncompress.h | 46 - include/asm-arm/arch-versatile/vmalloc.h | 21 - include/asm-arm/plat-s3c/iic.h | 2 +- include/asm-arm/plat-s3c/nand.h | 2 +- include/asm-arm/plat-s3c/regs-ac97.h | 2 +- include/asm-arm/plat-s3c/regs-adc.h | 2 +- include/asm-arm/plat-s3c/regs-iic.h | 2 +- include/asm-arm/plat-s3c/regs-nand.h | 2 +- include/asm-arm/plat-s3c/regs-rtc.h | 2 +- include/asm-arm/plat-s3c/regs-serial.h | 2 +- include/asm-arm/plat-s3c/regs-timer.h | 2 +- include/asm-arm/plat-s3c/regs-watchdog.h | 2 +- include/asm-arm/plat-s3c24xx/regs-iis.h | 2 +- include/asm-arm/plat-s3c24xx/regs-spi.h | 2 +- include/asm-arm/plat-s3c24xx/regs-udc.h | 2 +- include/asm-arm/plat-s3c24xx/udc.h | 2 +- 793 files changed, 14 insertions(+), 62504 deletions(-) delete mode 100644 include/asm-arm/arch-aaec2000/aaec2000.h delete mode 100644 include/asm-arm/arch-aaec2000/aaed2000.h delete mode 100644 include/asm-arm/arch-aaec2000/debug-macro.S delete mode 100644 include/asm-arm/arch-aaec2000/dma.h delete mode 100644 include/asm-arm/arch-aaec2000/entry-macro.S delete mode 100644 include/asm-arm/arch-aaec2000/hardware.h delete mode 100644 include/asm-arm/arch-aaec2000/io.h delete mode 100644 include/asm-arm/arch-aaec2000/irqs.h delete mode 100644 include/asm-arm/arch-aaec2000/memory.h delete mode 100644 include/asm-arm/arch-aaec2000/system.h delete mode 100644 include/asm-arm/arch-aaec2000/timex.h delete mode 100644 include/asm-arm/arch-aaec2000/uncompress.h delete mode 100644 include/asm-arm/arch-aaec2000/vmalloc.h delete mode 100644 include/asm-arm/arch-at91/at91_adc.h delete mode 100644 include/asm-arm/arch-at91/at91_aic.h delete mode 100644 include/asm-arm/arch-at91/at91_dbgu.h delete mode 100644 include/asm-arm/arch-at91/at91_mci.h delete mode 100644 include/asm-arm/arch-at91/at91_pio.h delete mode 100644 include/asm-arm/arch-at91/at91_pit.h delete mode 100644 include/asm-arm/arch-at91/at91_pmc.h delete mode 100644 include/asm-arm/arch-at91/at91_rstc.h delete mode 100644 include/asm-arm/arch-at91/at91_rtc.h delete mode 100644 include/asm-arm/arch-at91/at91_rtt.h delete mode 100644 include/asm-arm/arch-at91/at91_shdwc.h delete mode 100644 include/asm-arm/arch-at91/at91_spi.h delete mode 100644 include/asm-arm/arch-at91/at91_ssc.h delete mode 100644 include/asm-arm/arch-at91/at91_st.h delete mode 100644 include/asm-arm/arch-at91/at91_tc.h delete mode 100644 include/asm-arm/arch-at91/at91_twi.h delete mode 100644 include/asm-arm/arch-at91/at91_wdt.h delete mode 100644 include/asm-arm/arch-at91/at91cap9.h delete mode 100644 include/asm-arm/arch-at91/at91cap9_ddrsdr.h delete mode 100644 include/asm-arm/arch-at91/at91cap9_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91rm9200.h delete mode 100644 include/asm-arm/arch-at91/at91rm9200_emac.h delete mode 100644 include/asm-arm/arch-at91/at91rm9200_mc.h delete mode 100644 include/asm-arm/arch-at91/at91sam9260.h delete mode 100644 include/asm-arm/arch-at91/at91sam9260_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91sam9261.h delete mode 100644 include/asm-arm/arch-at91/at91sam9261_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91sam9263.h delete mode 100644 include/asm-arm/arch-at91/at91sam9263_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91sam9_sdramc.h delete mode 100644 include/asm-arm/arch-at91/at91sam9_smc.h delete mode 100644 include/asm-arm/arch-at91/at91sam9rl.h delete mode 100644 include/asm-arm/arch-at91/at91sam9rl_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91x40.h delete mode 100644 include/asm-arm/arch-at91/board.h delete mode 100644 include/asm-arm/arch-at91/cpu.h delete mode 100644 include/asm-arm/arch-at91/debug-macro.S delete mode 100644 include/asm-arm/arch-at91/dma.h delete mode 100644 include/asm-arm/arch-at91/entry-macro.S delete mode 100644 include/asm-arm/arch-at91/gpio.h delete mode 100644 include/asm-arm/arch-at91/hardware.h delete mode 100644 include/asm-arm/arch-at91/io.h delete mode 100644 include/asm-arm/arch-at91/irqs.h delete mode 100644 include/asm-arm/arch-at91/memory.h delete mode 100644 include/asm-arm/arch-at91/system.h delete mode 100644 include/asm-arm/arch-at91/timex.h delete mode 100644 include/asm-arm/arch-at91/uncompress.h delete mode 100644 include/asm-arm/arch-at91/vmalloc.h delete mode 100644 include/asm-arm/arch-cl7500/acornfb.h delete mode 100644 include/asm-arm/arch-cl7500/debug-macro.S delete mode 100644 include/asm-arm/arch-cl7500/dma.h delete mode 100644 include/asm-arm/arch-cl7500/entry-macro.S delete mode 100644 include/asm-arm/arch-cl7500/hardware.h delete mode 100644 include/asm-arm/arch-cl7500/io.h delete mode 100644 include/asm-arm/arch-cl7500/irq.h delete mode 100644 include/asm-arm/arch-cl7500/irqs.h delete mode 100644 include/asm-arm/arch-cl7500/memory.h delete mode 100644 include/asm-arm/arch-cl7500/system.h delete mode 100644 include/asm-arm/arch-cl7500/timex.h delete mode 100644 include/asm-arm/arch-cl7500/uncompress.h delete mode 100644 include/asm-arm/arch-cl7500/vmalloc.h delete mode 100644 include/asm-arm/arch-clps711x/autcpu12.h delete mode 100644 include/asm-arm/arch-clps711x/debug-macro.S delete mode 100644 include/asm-arm/arch-clps711x/dma.h delete mode 100644 include/asm-arm/arch-clps711x/entry-macro.S delete mode 100644 include/asm-arm/arch-clps711x/hardware.h delete mode 100644 include/asm-arm/arch-clps711x/io.h delete mode 100644 include/asm-arm/arch-clps711x/irqs.h delete mode 100644 include/asm-arm/arch-clps711x/memory.h delete mode 100644 include/asm-arm/arch-clps711x/syspld.h delete mode 100644 include/asm-arm/arch-clps711x/system.h delete mode 100644 include/asm-arm/arch-clps711x/time.h delete mode 100644 include/asm-arm/arch-clps711x/timex.h delete mode 100644 include/asm-arm/arch-clps711x/uncompress.h delete mode 100644 include/asm-arm/arch-clps711x/vmalloc.h delete mode 100644 include/asm-arm/arch-davinci/clock.h delete mode 100644 include/asm-arm/arch-davinci/common.h delete mode 100644 include/asm-arm/arch-davinci/debug-macro.S delete mode 100644 include/asm-arm/arch-davinci/dma.h delete mode 100644 include/asm-arm/arch-davinci/entry-macro.S delete mode 100644 include/asm-arm/arch-davinci/gpio.h delete mode 100644 include/asm-arm/arch-davinci/hardware.h delete mode 100644 include/asm-arm/arch-davinci/i2c.h delete mode 100644 include/asm-arm/arch-davinci/io.h delete mode 100644 include/asm-arm/arch-davinci/irqs.h delete mode 100644 include/asm-arm/arch-davinci/memory.h delete mode 100644 include/asm-arm/arch-davinci/mux.h delete mode 100644 include/asm-arm/arch-davinci/psc.h delete mode 100644 include/asm-arm/arch-davinci/serial.h delete mode 100644 include/asm-arm/arch-davinci/system.h delete mode 100644 include/asm-arm/arch-davinci/timex.h delete mode 100644 include/asm-arm/arch-davinci/uncompress.h delete mode 100644 include/asm-arm/arch-davinci/vmalloc.h delete mode 100644 include/asm-arm/arch-ebsa110/debug-macro.S delete mode 100644 include/asm-arm/arch-ebsa110/dma.h delete mode 100644 include/asm-arm/arch-ebsa110/entry-macro.S delete mode 100644 include/asm-arm/arch-ebsa110/hardware.h delete mode 100644 include/asm-arm/arch-ebsa110/io.h delete mode 100644 include/asm-arm/arch-ebsa110/irqs.h delete mode 100644 include/asm-arm/arch-ebsa110/memory.h delete mode 100644 include/asm-arm/arch-ebsa110/system.h delete mode 100644 include/asm-arm/arch-ebsa110/timex.h delete mode 100644 include/asm-arm/arch-ebsa110/uncompress.h delete mode 100644 include/asm-arm/arch-ebsa110/vmalloc.h delete mode 100644 include/asm-arm/arch-ebsa285/debug-macro.S delete mode 100644 include/asm-arm/arch-ebsa285/dma.h delete mode 100644 include/asm-arm/arch-ebsa285/entry-macro.S delete mode 100644 include/asm-arm/arch-ebsa285/hardware.h delete mode 100644 include/asm-arm/arch-ebsa285/io.h delete mode 100644 include/asm-arm/arch-ebsa285/irqs.h delete mode 100644 include/asm-arm/arch-ebsa285/memory.h delete mode 100644 include/asm-arm/arch-ebsa285/system.h delete mode 100644 include/asm-arm/arch-ebsa285/timex.h delete mode 100644 include/asm-arm/arch-ebsa285/uncompress.h delete mode 100644 include/asm-arm/arch-ebsa285/vmalloc.h delete mode 100644 include/asm-arm/arch-ep93xx/debug-macro.S delete mode 100644 include/asm-arm/arch-ep93xx/dma.h delete mode 100644 include/asm-arm/arch-ep93xx/entry-macro.S delete mode 100644 include/asm-arm/arch-ep93xx/ep93xx-regs.h delete mode 100644 include/asm-arm/arch-ep93xx/gesbc9312.h delete mode 100644 include/asm-arm/arch-ep93xx/gpio.h delete mode 100644 include/asm-arm/arch-ep93xx/hardware.h delete mode 100644 include/asm-arm/arch-ep93xx/io.h delete mode 100644 include/asm-arm/arch-ep93xx/irqs.h delete mode 100644 include/asm-arm/arch-ep93xx/memory.h delete mode 100644 include/asm-arm/arch-ep93xx/platform.h delete mode 100644 include/asm-arm/arch-ep93xx/system.h delete mode 100644 include/asm-arm/arch-ep93xx/timex.h delete mode 100644 include/asm-arm/arch-ep93xx/ts72xx.h delete mode 100644 include/asm-arm/arch-ep93xx/uncompress.h delete mode 100644 include/asm-arm/arch-ep93xx/vmalloc.h delete mode 100644 include/asm-arm/arch-h720x/boards.h delete mode 100644 include/asm-arm/arch-h720x/debug-macro.S delete mode 100644 include/asm-arm/arch-h720x/dma.h delete mode 100644 include/asm-arm/arch-h720x/entry-macro.S delete mode 100644 include/asm-arm/arch-h720x/h7201-regs.h delete mode 100644 include/asm-arm/arch-h720x/h7202-regs.h delete mode 100644 include/asm-arm/arch-h720x/hardware.h delete mode 100644 include/asm-arm/arch-h720x/io.h delete mode 100644 include/asm-arm/arch-h720x/irqs.h delete mode 100644 include/asm-arm/arch-h720x/memory.h delete mode 100644 include/asm-arm/arch-h720x/system.h delete mode 100644 include/asm-arm/arch-h720x/timex.h delete mode 100644 include/asm-arm/arch-h720x/uncompress.h delete mode 100644 include/asm-arm/arch-h720x/vmalloc.h delete mode 100644 include/asm-arm/arch-imx/debug-macro.S delete mode 100644 include/asm-arm/arch-imx/dma.h delete mode 100644 include/asm-arm/arch-imx/entry-macro.S delete mode 100644 include/asm-arm/arch-imx/gpio.h delete mode 100644 include/asm-arm/arch-imx/hardware.h delete mode 100644 include/asm-arm/arch-imx/imx-dma.h delete mode 100644 include/asm-arm/arch-imx/imx-regs.h delete mode 100644 include/asm-arm/arch-imx/imx-uart.h delete mode 100644 include/asm-arm/arch-imx/imxfb.h delete mode 100644 include/asm-arm/arch-imx/io.h delete mode 100644 include/asm-arm/arch-imx/irqs.h delete mode 100644 include/asm-arm/arch-imx/memory.h delete mode 100644 include/asm-arm/arch-imx/mmc.h delete mode 100644 include/asm-arm/arch-imx/mx1ads.h delete mode 100644 include/asm-arm/arch-imx/spi_imx.h delete mode 100644 include/asm-arm/arch-imx/system.h delete mode 100644 include/asm-arm/arch-imx/timex.h delete mode 100644 include/asm-arm/arch-imx/uncompress.h delete mode 100644 include/asm-arm/arch-imx/vmalloc.h delete mode 100644 include/asm-arm/arch-integrator/bits.h delete mode 100644 include/asm-arm/arch-integrator/cm.h delete mode 100644 include/asm-arm/arch-integrator/debug-macro.S delete mode 100644 include/asm-arm/arch-integrator/dma.h delete mode 100644 include/asm-arm/arch-integrator/entry-macro.S delete mode 100644 include/asm-arm/arch-integrator/hardware.h delete mode 100644 include/asm-arm/arch-integrator/impd1.h delete mode 100644 include/asm-arm/arch-integrator/io.h delete mode 100644 include/asm-arm/arch-integrator/irqs.h delete mode 100644 include/asm-arm/arch-integrator/lm.h delete mode 100644 include/asm-arm/arch-integrator/memory.h delete mode 100644 include/asm-arm/arch-integrator/platform.h delete mode 100644 include/asm-arm/arch-integrator/system.h delete mode 100644 include/asm-arm/arch-integrator/timex.h delete mode 100644 include/asm-arm/arch-integrator/uncompress.h delete mode 100644 include/asm-arm/arch-integrator/vmalloc.h delete mode 100644 include/asm-arm/arch-iop13xx/adma.h delete mode 100644 include/asm-arm/arch-iop13xx/debug-macro.S delete mode 100644 include/asm-arm/arch-iop13xx/dma.h delete mode 100644 include/asm-arm/arch-iop13xx/entry-macro.S delete mode 100644 include/asm-arm/arch-iop13xx/hardware.h delete mode 100644 include/asm-arm/arch-iop13xx/io.h delete mode 100644 include/asm-arm/arch-iop13xx/iop13xx.h delete mode 100644 include/asm-arm/arch-iop13xx/iq81340.h delete mode 100644 include/asm-arm/arch-iop13xx/irqs.h delete mode 100644 include/asm-arm/arch-iop13xx/memory.h delete mode 100644 include/asm-arm/arch-iop13xx/msi.h delete mode 100644 include/asm-arm/arch-iop13xx/pci.h delete mode 100644 include/asm-arm/arch-iop13xx/system.h delete mode 100644 include/asm-arm/arch-iop13xx/time.h delete mode 100644 include/asm-arm/arch-iop13xx/timex.h delete mode 100644 include/asm-arm/arch-iop13xx/uncompress.h delete mode 100644 include/asm-arm/arch-iop13xx/vmalloc.h delete mode 100644 include/asm-arm/arch-iop32x/adma.h delete mode 100644 include/asm-arm/arch-iop32x/debug-macro.S delete mode 100644 include/asm-arm/arch-iop32x/dma.h delete mode 100644 include/asm-arm/arch-iop32x/entry-macro.S delete mode 100644 include/asm-arm/arch-iop32x/glantank.h delete mode 100644 include/asm-arm/arch-iop32x/gpio.h delete mode 100644 include/asm-arm/arch-iop32x/hardware.h delete mode 100644 include/asm-arm/arch-iop32x/io.h delete mode 100644 include/asm-arm/arch-iop32x/iop32x.h delete mode 100644 include/asm-arm/arch-iop32x/iq31244.h delete mode 100644 include/asm-arm/arch-iop32x/iq80321.h delete mode 100644 include/asm-arm/arch-iop32x/irqs.h delete mode 100644 include/asm-arm/arch-iop32x/memory.h delete mode 100644 include/asm-arm/arch-iop32x/n2100.h delete mode 100644 include/asm-arm/arch-iop32x/system.h delete mode 100644 include/asm-arm/arch-iop32x/time.h delete mode 100644 include/asm-arm/arch-iop32x/timex.h delete mode 100644 include/asm-arm/arch-iop32x/uncompress.h delete mode 100644 include/asm-arm/arch-iop32x/vmalloc.h delete mode 100644 include/asm-arm/arch-iop33x/adma.h delete mode 100644 include/asm-arm/arch-iop33x/debug-macro.S delete mode 100644 include/asm-arm/arch-iop33x/dma.h delete mode 100644 include/asm-arm/arch-iop33x/entry-macro.S delete mode 100644 include/asm-arm/arch-iop33x/gpio.h delete mode 100644 include/asm-arm/arch-iop33x/hardware.h delete mode 100644 include/asm-arm/arch-iop33x/io.h delete mode 100644 include/asm-arm/arch-iop33x/iop33x.h delete mode 100644 include/asm-arm/arch-iop33x/iq80331.h delete mode 100644 include/asm-arm/arch-iop33x/iq80332.h delete mode 100644 include/asm-arm/arch-iop33x/irqs.h delete mode 100644 include/asm-arm/arch-iop33x/memory.h delete mode 100644 include/asm-arm/arch-iop33x/system.h delete mode 100644 include/asm-arm/arch-iop33x/time.h delete mode 100644 include/asm-arm/arch-iop33x/timex.h delete mode 100644 include/asm-arm/arch-iop33x/uncompress.h delete mode 100644 include/asm-arm/arch-iop33x/vmalloc.h delete mode 100644 include/asm-arm/arch-ixp2000/debug-macro.S delete mode 100644 include/asm-arm/arch-ixp2000/dma.h delete mode 100644 include/asm-arm/arch-ixp2000/enp2611.h delete mode 100644 include/asm-arm/arch-ixp2000/entry-macro.S delete mode 100644 include/asm-arm/arch-ixp2000/gpio.h delete mode 100644 include/asm-arm/arch-ixp2000/hardware.h delete mode 100644 include/asm-arm/arch-ixp2000/io.h delete mode 100644 include/asm-arm/arch-ixp2000/irqs.h delete mode 100644 include/asm-arm/arch-ixp2000/ixdp2x00.h delete mode 100644 include/asm-arm/arch-ixp2000/ixdp2x01.h delete mode 100644 include/asm-arm/arch-ixp2000/ixp2000-regs.h delete mode 100644 include/asm-arm/arch-ixp2000/memory.h delete mode 100644 include/asm-arm/arch-ixp2000/platform.h delete mode 100644 include/asm-arm/arch-ixp2000/system.h delete mode 100644 include/asm-arm/arch-ixp2000/timex.h delete mode 100644 include/asm-arm/arch-ixp2000/uncompress.h delete mode 100644 include/asm-arm/arch-ixp2000/vmalloc.h delete mode 100644 include/asm-arm/arch-ixp23xx/debug-macro.S delete mode 100644 include/asm-arm/arch-ixp23xx/dma.h delete mode 100644 include/asm-arm/arch-ixp23xx/entry-macro.S delete mode 100644 include/asm-arm/arch-ixp23xx/hardware.h delete mode 100644 include/asm-arm/arch-ixp23xx/io.h delete mode 100644 include/asm-arm/arch-ixp23xx/irqs.h delete mode 100644 include/asm-arm/arch-ixp23xx/ixdp2351.h delete mode 100644 include/asm-arm/arch-ixp23xx/ixp23xx.h delete mode 100644 include/asm-arm/arch-ixp23xx/memory.h delete mode 100644 include/asm-arm/arch-ixp23xx/platform.h delete mode 100644 include/asm-arm/arch-ixp23xx/system.h delete mode 100644 include/asm-arm/arch-ixp23xx/time.h delete mode 100644 include/asm-arm/arch-ixp23xx/timex.h delete mode 100644 include/asm-arm/arch-ixp23xx/uncompress.h delete mode 100644 include/asm-arm/arch-ixp23xx/vmalloc.h delete mode 100644 include/asm-arm/arch-ixp4xx/avila.h delete mode 100644 include/asm-arm/arch-ixp4xx/coyote.h delete mode 100644 include/asm-arm/arch-ixp4xx/cpu.h delete mode 100644 include/asm-arm/arch-ixp4xx/debug-macro.S delete mode 100644 include/asm-arm/arch-ixp4xx/dma.h delete mode 100644 include/asm-arm/arch-ixp4xx/dsmg600.h delete mode 100644 include/asm-arm/arch-ixp4xx/entry-macro.S delete mode 100644 include/asm-arm/arch-ixp4xx/fsg.h delete mode 100644 include/asm-arm/arch-ixp4xx/gpio.h delete mode 100644 include/asm-arm/arch-ixp4xx/gtwx5715.h delete mode 100644 include/asm-arm/arch-ixp4xx/hardware.h delete mode 100644 include/asm-arm/arch-ixp4xx/io.h delete mode 100644 include/asm-arm/arch-ixp4xx/irqs.h delete mode 100644 include/asm-arm/arch-ixp4xx/ixdp425.h delete mode 100644 include/asm-arm/arch-ixp4xx/ixp4xx-regs.h delete mode 100644 include/asm-arm/arch-ixp4xx/memory.h delete mode 100644 include/asm-arm/arch-ixp4xx/nas100d.h delete mode 100644 include/asm-arm/arch-ixp4xx/npe.h delete mode 100644 include/asm-arm/arch-ixp4xx/nslu2.h delete mode 100644 include/asm-arm/arch-ixp4xx/platform.h delete mode 100644 include/asm-arm/arch-ixp4xx/prpmc1100.h delete mode 100644 include/asm-arm/arch-ixp4xx/qmgr.h delete mode 100644 include/asm-arm/arch-ixp4xx/system.h delete mode 100644 include/asm-arm/arch-ixp4xx/timex.h delete mode 100644 include/asm-arm/arch-ixp4xx/udc.h delete mode 100644 include/asm-arm/arch-ixp4xx/uncompress.h delete mode 100644 include/asm-arm/arch-ixp4xx/vmalloc.h delete mode 100644 include/asm-arm/arch-kirkwood/debug-macro.S delete mode 100644 include/asm-arm/arch-kirkwood/dma.h delete mode 100644 include/asm-arm/arch-kirkwood/entry-macro.S delete mode 100644 include/asm-arm/arch-kirkwood/hardware.h delete mode 100644 include/asm-arm/arch-kirkwood/io.h delete mode 100644 include/asm-arm/arch-kirkwood/irqs.h delete mode 100644 include/asm-arm/arch-kirkwood/kirkwood.h delete mode 100644 include/asm-arm/arch-kirkwood/memory.h delete mode 100644 include/asm-arm/arch-kirkwood/system.h delete mode 100644 include/asm-arm/arch-kirkwood/timex.h delete mode 100644 include/asm-arm/arch-kirkwood/uncompress.h delete mode 100644 include/asm-arm/arch-kirkwood/vmalloc.h delete mode 100644 include/asm-arm/arch-ks8695/debug-macro.S delete mode 100644 include/asm-arm/arch-ks8695/devices.h delete mode 100644 include/asm-arm/arch-ks8695/dma.h delete mode 100644 include/asm-arm/arch-ks8695/entry-macro.S delete mode 100644 include/asm-arm/arch-ks8695/gpio.h delete mode 100644 include/asm-arm/arch-ks8695/hardware.h delete mode 100644 include/asm-arm/arch-ks8695/io.h delete mode 100644 include/asm-arm/arch-ks8695/irqs.h delete mode 100644 include/asm-arm/arch-ks8695/memory.h delete mode 100644 include/asm-arm/arch-ks8695/regs-gpio.h delete mode 100644 include/asm-arm/arch-ks8695/regs-hpna.h delete mode 100644 include/asm-arm/arch-ks8695/regs-irq.h delete mode 100644 include/asm-arm/arch-ks8695/regs-lan.h delete mode 100644 include/asm-arm/arch-ks8695/regs-mem.h delete mode 100644 include/asm-arm/arch-ks8695/regs-misc.h delete mode 100644 include/asm-arm/arch-ks8695/regs-pci.h delete mode 100644 include/asm-arm/arch-ks8695/regs-switch.h delete mode 100644 include/asm-arm/arch-ks8695/regs-sys.h delete mode 100644 include/asm-arm/arch-ks8695/regs-timer.h delete mode 100644 include/asm-arm/arch-ks8695/regs-uart.h delete mode 100644 include/asm-arm/arch-ks8695/regs-wan.h delete mode 100644 include/asm-arm/arch-ks8695/system.h delete mode 100644 include/asm-arm/arch-ks8695/timex.h delete mode 100644 include/asm-arm/arch-ks8695/uncompress.h delete mode 100644 include/asm-arm/arch-ks8695/vmalloc.h delete mode 100644 include/asm-arm/arch-l7200/aux_reg.h delete mode 100644 include/asm-arm/arch-l7200/debug-macro.S delete mode 100644 include/asm-arm/arch-l7200/dma.h delete mode 100644 include/asm-arm/arch-l7200/entry-macro.S delete mode 100644 include/asm-arm/arch-l7200/gp_timers.h delete mode 100644 include/asm-arm/arch-l7200/gpio.h delete mode 100644 include/asm-arm/arch-l7200/hardware.h delete mode 100644 include/asm-arm/arch-l7200/io.h delete mode 100644 include/asm-arm/arch-l7200/irqs.h delete mode 100644 include/asm-arm/arch-l7200/memory.h delete mode 100644 include/asm-arm/arch-l7200/pmpcon.h delete mode 100644 include/asm-arm/arch-l7200/pmu.h delete mode 100644 include/asm-arm/arch-l7200/serial.h delete mode 100644 include/asm-arm/arch-l7200/serial_l7200.h delete mode 100644 include/asm-arm/arch-l7200/sib.h delete mode 100644 include/asm-arm/arch-l7200/sys-clock.h delete mode 100644 include/asm-arm/arch-l7200/system.h delete mode 100644 include/asm-arm/arch-l7200/time.h delete mode 100644 include/asm-arm/arch-l7200/timex.h delete mode 100644 include/asm-arm/arch-l7200/uncompress.h delete mode 100644 include/asm-arm/arch-l7200/vmalloc.h delete mode 100644 include/asm-arm/arch-lh7a40x/clocks.h delete mode 100644 include/asm-arm/arch-lh7a40x/constants.h delete mode 100644 include/asm-arm/arch-lh7a40x/debug-macro.S delete mode 100644 include/asm-arm/arch-lh7a40x/dma.h delete mode 100644 include/asm-arm/arch-lh7a40x/entry-macro.S delete mode 100644 include/asm-arm/arch-lh7a40x/hardware.h delete mode 100644 include/asm-arm/arch-lh7a40x/io.h delete mode 100644 include/asm-arm/arch-lh7a40x/irqs.h delete mode 100644 include/asm-arm/arch-lh7a40x/memory.h delete mode 100644 include/asm-arm/arch-lh7a40x/registers.h delete mode 100644 include/asm-arm/arch-lh7a40x/ssp.h delete mode 100644 include/asm-arm/arch-lh7a40x/system.h delete mode 100644 include/asm-arm/arch-lh7a40x/timex.h delete mode 100644 include/asm-arm/arch-lh7a40x/uncompress.h delete mode 100644 include/asm-arm/arch-lh7a40x/vmalloc.h delete mode 100644 include/asm-arm/arch-loki/debug-macro.S delete mode 100644 include/asm-arm/arch-loki/dma.h delete mode 100644 include/asm-arm/arch-loki/entry-macro.S delete mode 100644 include/asm-arm/arch-loki/hardware.h delete mode 100644 include/asm-arm/arch-loki/io.h delete mode 100644 include/asm-arm/arch-loki/irqs.h delete mode 100644 include/asm-arm/arch-loki/loki.h delete mode 100644 include/asm-arm/arch-loki/memory.h delete mode 100644 include/asm-arm/arch-loki/system.h delete mode 100644 include/asm-arm/arch-loki/timex.h delete mode 100644 include/asm-arm/arch-loki/uncompress.h delete mode 100644 include/asm-arm/arch-loki/vmalloc.h delete mode 100644 include/asm-arm/arch-msm/board.h delete mode 100644 include/asm-arm/arch-msm/debug-macro.S delete mode 100644 include/asm-arm/arch-msm/dma.h delete mode 100644 include/asm-arm/arch-msm/entry-macro.S delete mode 100644 include/asm-arm/arch-msm/hardware.h delete mode 100644 include/asm-arm/arch-msm/io.h delete mode 100644 include/asm-arm/arch-msm/irqs.h delete mode 100644 include/asm-arm/arch-msm/memory.h delete mode 100644 include/asm-arm/arch-msm/msm_iomap.h delete mode 100644 include/asm-arm/arch-msm/system.h delete mode 100644 include/asm-arm/arch-msm/timex.h delete mode 100644 include/asm-arm/arch-msm/uncompress.h delete mode 100644 include/asm-arm/arch-msm/vmalloc.h delete mode 100644 include/asm-arm/arch-mv78xx0/debug-macro.S delete mode 100644 include/asm-arm/arch-mv78xx0/dma.h delete mode 100644 include/asm-arm/arch-mv78xx0/entry-macro.S delete mode 100644 include/asm-arm/arch-mv78xx0/hardware.h delete mode 100644 include/asm-arm/arch-mv78xx0/io.h delete mode 100644 include/asm-arm/arch-mv78xx0/irqs.h delete mode 100644 include/asm-arm/arch-mv78xx0/memory.h delete mode 100644 include/asm-arm/arch-mv78xx0/mv78xx0.h delete mode 100644 include/asm-arm/arch-mv78xx0/system.h delete mode 100644 include/asm-arm/arch-mv78xx0/timex.h delete mode 100644 include/asm-arm/arch-mv78xx0/uncompress.h delete mode 100644 include/asm-arm/arch-mv78xx0/vmalloc.h delete mode 100644 include/asm-arm/arch-mxc/board-mx27ads.h delete mode 100644 include/asm-arm/arch-mxc/board-mx31ads.h delete mode 100644 include/asm-arm/arch-mxc/board-mx31lite.h delete mode 100644 include/asm-arm/arch-mxc/board-pcm037.h delete mode 100644 include/asm-arm/arch-mxc/board-pcm038.h delete mode 100644 include/asm-arm/arch-mxc/clock.h delete mode 100644 include/asm-arm/arch-mxc/common.h delete mode 100644 include/asm-arm/arch-mxc/debug-macro.S delete mode 100644 include/asm-arm/arch-mxc/dma.h delete mode 100644 include/asm-arm/arch-mxc/entry-macro.S delete mode 100644 include/asm-arm/arch-mxc/gpio.h delete mode 100644 include/asm-arm/arch-mxc/hardware.h delete mode 100644 include/asm-arm/arch-mxc/iim.h delete mode 100644 include/asm-arm/arch-mxc/imx-uart.h delete mode 100644 include/asm-arm/arch-mxc/io.h delete mode 100644 include/asm-arm/arch-mxc/iomux-mx1-mx2.h delete mode 100644 include/asm-arm/arch-mxc/iomux-mx3.h delete mode 100644 include/asm-arm/arch-mxc/irqs.h delete mode 100644 include/asm-arm/arch-mxc/memory.h delete mode 100644 include/asm-arm/arch-mxc/mx27.h delete mode 100644 include/asm-arm/arch-mxc/mx31.h delete mode 100644 include/asm-arm/arch-mxc/mxc.h delete mode 100644 include/asm-arm/arch-mxc/mxc_timer.h delete mode 100644 include/asm-arm/arch-mxc/system.h delete mode 100644 include/asm-arm/arch-mxc/timex.h delete mode 100644 include/asm-arm/arch-mxc/uncompress.h delete mode 100644 include/asm-arm/arch-mxc/vmalloc.h delete mode 100644 include/asm-arm/arch-netx/debug-macro.S delete mode 100644 include/asm-arm/arch-netx/dma.h delete mode 100644 include/asm-arm/arch-netx/entry-macro.S delete mode 100644 include/asm-arm/arch-netx/eth.h delete mode 100644 include/asm-arm/arch-netx/hardware.h delete mode 100644 include/asm-arm/arch-netx/io.h delete mode 100644 include/asm-arm/arch-netx/irqs.h delete mode 100644 include/asm-arm/arch-netx/memory.h delete mode 100644 include/asm-arm/arch-netx/netx-regs.h delete mode 100644 include/asm-arm/arch-netx/param.h delete mode 100644 include/asm-arm/arch-netx/pfifo.h delete mode 100644 include/asm-arm/arch-netx/system.h delete mode 100644 include/asm-arm/arch-netx/timex.h delete mode 100644 include/asm-arm/arch-netx/uncompress.h delete mode 100644 include/asm-arm/arch-netx/vmalloc.h delete mode 100644 include/asm-arm/arch-netx/xc.h delete mode 100644 include/asm-arm/arch-ns9xxx/board.h delete mode 100644 include/asm-arm/arch-ns9xxx/debug-macro.S delete mode 100644 include/asm-arm/arch-ns9xxx/dma.h delete mode 100644 include/asm-arm/arch-ns9xxx/entry-macro.S delete mode 100644 include/asm-arm/arch-ns9xxx/gpio.h delete mode 100644 include/asm-arm/arch-ns9xxx/hardware.h delete mode 100644 include/asm-arm/arch-ns9xxx/io.h delete mode 100644 include/asm-arm/arch-ns9xxx/irqs.h delete mode 100644 include/asm-arm/arch-ns9xxx/memory.h delete mode 100644 include/asm-arm/arch-ns9xxx/module.h delete mode 100644 include/asm-arm/arch-ns9xxx/processor-ns9360.h delete mode 100644 include/asm-arm/arch-ns9xxx/processor.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-bbu.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-mem.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-sys-common.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h delete mode 100644 include/asm-arm/arch-ns9xxx/system.h delete mode 100644 include/asm-arm/arch-ns9xxx/timex.h delete mode 100644 include/asm-arm/arch-ns9xxx/uncompress.h delete mode 100644 include/asm-arm/arch-ns9xxx/vmalloc.h delete mode 100644 include/asm-arm/arch-omap/aic23.h delete mode 100644 include/asm-arm/arch-omap/blizzard.h delete mode 100644 include/asm-arm/arch-omap/board-2430sdp.h delete mode 100644 include/asm-arm/arch-omap/board-ams-delta.h delete mode 100644 include/asm-arm/arch-omap/board-apollon.h delete mode 100644 include/asm-arm/arch-omap/board-fsample.h delete mode 100644 include/asm-arm/arch-omap/board-h2.h delete mode 100644 include/asm-arm/arch-omap/board-h3.h delete mode 100644 include/asm-arm/arch-omap/board-h4.h delete mode 100644 include/asm-arm/arch-omap/board-innovator.h delete mode 100644 include/asm-arm/arch-omap/board-nokia.h delete mode 100644 include/asm-arm/arch-omap/board-osk.h delete mode 100644 include/asm-arm/arch-omap/board-palmte.h delete mode 100644 include/asm-arm/arch-omap/board-palmtt.h delete mode 100644 include/asm-arm/arch-omap/board-palmz71.h delete mode 100644 include/asm-arm/arch-omap/board-perseus2.h delete mode 100644 include/asm-arm/arch-omap/board-sx1.h delete mode 100644 include/asm-arm/arch-omap/board-voiceblue.h delete mode 100644 include/asm-arm/arch-omap/board.h delete mode 100644 include/asm-arm/arch-omap/clock.h delete mode 100644 include/asm-arm/arch-omap/common.h delete mode 100644 include/asm-arm/arch-omap/control.h delete mode 100644 include/asm-arm/arch-omap/cpu.h delete mode 100644 include/asm-arm/arch-omap/debug-macro.S delete mode 100644 include/asm-arm/arch-omap/dma.h delete mode 100644 include/asm-arm/arch-omap/dmtimer.h delete mode 100644 include/asm-arm/arch-omap/dsp_common.h delete mode 100644 include/asm-arm/arch-omap/eac.h delete mode 100644 include/asm-arm/arch-omap/entry-macro.S delete mode 100644 include/asm-arm/arch-omap/fpga.h delete mode 100644 include/asm-arm/arch-omap/gpio-switch.h delete mode 100644 include/asm-arm/arch-omap/gpio.h delete mode 100644 include/asm-arm/arch-omap/gpioexpander.h delete mode 100644 include/asm-arm/arch-omap/gpmc.h delete mode 100644 include/asm-arm/arch-omap/hardware.h delete mode 100644 include/asm-arm/arch-omap/hwa742.h delete mode 100644 include/asm-arm/arch-omap/io.h delete mode 100644 include/asm-arm/arch-omap/irda.h delete mode 100644 include/asm-arm/arch-omap/irqs.h delete mode 100644 include/asm-arm/arch-omap/keypad.h delete mode 100644 include/asm-arm/arch-omap/lcd_mipid.h delete mode 100644 include/asm-arm/arch-omap/led.h delete mode 100644 include/asm-arm/arch-omap/mailbox.h delete mode 100644 include/asm-arm/arch-omap/mcbsp.h delete mode 100644 include/asm-arm/arch-omap/mcspi.h delete mode 100644 include/asm-arm/arch-omap/memory.h delete mode 100644 include/asm-arm/arch-omap/menelaus.h delete mode 100644 include/asm-arm/arch-omap/mmc.h delete mode 100644 include/asm-arm/arch-omap/mtd-xip.h delete mode 100644 include/asm-arm/arch-omap/mux.h delete mode 100644 include/asm-arm/arch-omap/nand.h delete mode 100644 include/asm-arm/arch-omap/omap-alsa.h delete mode 100644 include/asm-arm/arch-omap/omap1510.h delete mode 100644 include/asm-arm/arch-omap/omap16xx.h delete mode 100644 include/asm-arm/arch-omap/omap24xx.h delete mode 100644 include/asm-arm/arch-omap/omap34xx.h delete mode 100644 include/asm-arm/arch-omap/omap730.h delete mode 100644 include/asm-arm/arch-omap/omapfb.h delete mode 100644 include/asm-arm/arch-omap/onenand.h delete mode 100644 include/asm-arm/arch-omap/param.h delete mode 100644 include/asm-arm/arch-omap/pm.h delete mode 100644 include/asm-arm/arch-omap/prcm.h delete mode 100644 include/asm-arm/arch-omap/sdrc.h delete mode 100644 include/asm-arm/arch-omap/serial.h delete mode 100644 include/asm-arm/arch-omap/sram.h delete mode 100644 include/asm-arm/arch-omap/system.h delete mode 100644 include/asm-arm/arch-omap/tc.h delete mode 100644 include/asm-arm/arch-omap/timex.h delete mode 100644 include/asm-arm/arch-omap/uncompress.h delete mode 100644 include/asm-arm/arch-omap/usb.h delete mode 100644 include/asm-arm/arch-omap/vmalloc.h delete mode 100644 include/asm-arm/arch-orion5x/debug-macro.S delete mode 100644 include/asm-arm/arch-orion5x/dma.h delete mode 100644 include/asm-arm/arch-orion5x/entry-macro.S delete mode 100644 include/asm-arm/arch-orion5x/gpio.h delete mode 100644 include/asm-arm/arch-orion5x/hardware.h delete mode 100644 include/asm-arm/arch-orion5x/io.h delete mode 100644 include/asm-arm/arch-orion5x/irqs.h delete mode 100644 include/asm-arm/arch-orion5x/memory.h delete mode 100644 include/asm-arm/arch-orion5x/orion5x.h delete mode 100644 include/asm-arm/arch-orion5x/system.h delete mode 100644 include/asm-arm/arch-orion5x/timex.h delete mode 100644 include/asm-arm/arch-orion5x/uncompress.h delete mode 100644 include/asm-arm/arch-orion5x/vmalloc.h delete mode 100644 include/asm-arm/arch-pnx4008/clock.h delete mode 100644 include/asm-arm/arch-pnx4008/debug-macro.S delete mode 100644 include/asm-arm/arch-pnx4008/dma.h delete mode 100644 include/asm-arm/arch-pnx4008/entry-macro.S delete mode 100644 include/asm-arm/arch-pnx4008/gpio.h delete mode 100644 include/asm-arm/arch-pnx4008/hardware.h delete mode 100644 include/asm-arm/arch-pnx4008/i2c.h delete mode 100644 include/asm-arm/arch-pnx4008/io.h delete mode 100644 include/asm-arm/arch-pnx4008/irq.h delete mode 100644 include/asm-arm/arch-pnx4008/irqs.h delete mode 100644 include/asm-arm/arch-pnx4008/memory.h delete mode 100644 include/asm-arm/arch-pnx4008/param.h delete mode 100644 include/asm-arm/arch-pnx4008/platform.h delete mode 100644 include/asm-arm/arch-pnx4008/pm.h delete mode 100644 include/asm-arm/arch-pnx4008/system.h delete mode 100644 include/asm-arm/arch-pnx4008/timex.h delete mode 100644 include/asm-arm/arch-pnx4008/uncompress.h delete mode 100644 include/asm-arm/arch-pnx4008/vmalloc.h delete mode 100644 include/asm-arm/arch-pxa/akita.h delete mode 100644 include/asm-arm/arch-pxa/audio.h delete mode 100644 include/asm-arm/arch-pxa/bitfield.h delete mode 100644 include/asm-arm/arch-pxa/camera.h delete mode 100644 include/asm-arm/arch-pxa/colibri.h delete mode 100644 include/asm-arm/arch-pxa/corgi.h delete mode 100644 include/asm-arm/arch-pxa/debug-macro.S delete mode 100644 include/asm-arm/arch-pxa/dma.h delete mode 100644 include/asm-arm/arch-pxa/entry-macro.S delete mode 100644 include/asm-arm/arch-pxa/eseries-gpio.h delete mode 100644 include/asm-arm/arch-pxa/eseries-irq.h delete mode 100644 include/asm-arm/arch-pxa/gpio.h delete mode 100644 include/asm-arm/arch-pxa/gumstix.h delete mode 100644 include/asm-arm/arch-pxa/hardware.h delete mode 100644 include/asm-arm/arch-pxa/i2c.h delete mode 100644 include/asm-arm/arch-pxa/idp.h delete mode 100644 include/asm-arm/arch-pxa/io.h delete mode 100644 include/asm-arm/arch-pxa/irda.h delete mode 100644 include/asm-arm/arch-pxa/irqs.h delete mode 100644 include/asm-arm/arch-pxa/littleton.h delete mode 100644 include/asm-arm/arch-pxa/lpd270.h delete mode 100644 include/asm-arm/arch-pxa/lubbock.h delete mode 100644 include/asm-arm/arch-pxa/magician.h delete mode 100644 include/asm-arm/arch-pxa/mainstone.h delete mode 100644 include/asm-arm/arch-pxa/memory.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa25x.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa27x.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa2xx.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa300.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa320.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa3xx.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa930.h delete mode 100644 include/asm-arm/arch-pxa/mfp.h delete mode 100644 include/asm-arm/arch-pxa/mmc.h delete mode 100644 include/asm-arm/arch-pxa/mtd-xip.h delete mode 100644 include/asm-arm/arch-pxa/ohci.h delete mode 100644 include/asm-arm/arch-pxa/palmtx.h delete mode 100644 include/asm-arm/arch-pxa/pcm027.h delete mode 100644 include/asm-arm/arch-pxa/pcm990_baseboard.h delete mode 100644 include/asm-arm/arch-pxa/pm.h delete mode 100644 include/asm-arm/arch-pxa/poodle.h delete mode 100644 include/asm-arm/arch-pxa/pxa-regs.h delete mode 100644 include/asm-arm/arch-pxa/pxa25x-udc.h delete mode 100644 include/asm-arm/arch-pxa/pxa27x-udc.h delete mode 100644 include/asm-arm/arch-pxa/pxa27x_keypad.h delete mode 100644 include/asm-arm/arch-pxa/pxa2xx-gpio.h delete mode 100644 include/asm-arm/arch-pxa/pxa2xx-regs.h delete mode 100644 include/asm-arm/arch-pxa/pxa2xx_spi.h delete mode 100644 include/asm-arm/arch-pxa/pxa3xx-regs.h delete mode 100644 include/asm-arm/arch-pxa/pxa3xx_nand.h delete mode 100644 include/asm-arm/arch-pxa/pxafb.h delete mode 100644 include/asm-arm/arch-pxa/regs-lcd.h delete mode 100644 include/asm-arm/arch-pxa/regs-ssp.h delete mode 100644 include/asm-arm/arch-pxa/sharpsl.h delete mode 100644 include/asm-arm/arch-pxa/spitz.h delete mode 100644 include/asm-arm/arch-pxa/ssp.h delete mode 100644 include/asm-arm/arch-pxa/system.h delete mode 100644 include/asm-arm/arch-pxa/timex.h delete mode 100644 include/asm-arm/arch-pxa/tosa.h delete mode 100644 include/asm-arm/arch-pxa/tosa_bt.h delete mode 100644 include/asm-arm/arch-pxa/trizeps4.h delete mode 100644 include/asm-arm/arch-pxa/udc.h delete mode 100644 include/asm-arm/arch-pxa/uncompress.h delete mode 100644 include/asm-arm/arch-pxa/vmalloc.h delete mode 100644 include/asm-arm/arch-pxa/zylonite.h delete mode 100644 include/asm-arm/arch-realview/board-eb.h delete mode 100644 include/asm-arm/arch-realview/board-pb1176.h delete mode 100644 include/asm-arm/arch-realview/board-pb11mp.h delete mode 100644 include/asm-arm/arch-realview/debug-macro.S delete mode 100644 include/asm-arm/arch-realview/dma.h delete mode 100644 include/asm-arm/arch-realview/entry-macro.S delete mode 100644 include/asm-arm/arch-realview/hardware.h delete mode 100644 include/asm-arm/arch-realview/io.h delete mode 100644 include/asm-arm/arch-realview/irqs.h delete mode 100644 include/asm-arm/arch-realview/memory.h delete mode 100644 include/asm-arm/arch-realview/platform.h delete mode 100644 include/asm-arm/arch-realview/scu.h delete mode 100644 include/asm-arm/arch-realview/smp.h delete mode 100644 include/asm-arm/arch-realview/system.h delete mode 100644 include/asm-arm/arch-realview/timex.h delete mode 100644 include/asm-arm/arch-realview/uncompress.h delete mode 100644 include/asm-arm/arch-realview/vmalloc.h delete mode 100644 include/asm-arm/arch-rpc/acornfb.h delete mode 100644 include/asm-arm/arch-rpc/debug-macro.S delete mode 100644 include/asm-arm/arch-rpc/dma.h delete mode 100644 include/asm-arm/arch-rpc/entry-macro.S delete mode 100644 include/asm-arm/arch-rpc/hardware.h delete mode 100644 include/asm-arm/arch-rpc/io.h delete mode 100644 include/asm-arm/arch-rpc/irqs.h delete mode 100644 include/asm-arm/arch-rpc/memory.h delete mode 100644 include/asm-arm/arch-rpc/system.h delete mode 100644 include/asm-arm/arch-rpc/timex.h delete mode 100644 include/asm-arm/arch-rpc/uncompress.h delete mode 100644 include/asm-arm/arch-rpc/vmalloc.h delete mode 100644 include/asm-arm/arch-s3c2400/map.h delete mode 100644 include/asm-arm/arch-s3c2400/memory.h delete mode 100644 include/asm-arm/arch-s3c2410/anubis-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/anubis-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/anubis-map.h delete mode 100644 include/asm-arm/arch-s3c2410/audio.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-map.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-pmu.h delete mode 100644 include/asm-arm/arch-s3c2410/debug-macro.S delete mode 100644 include/asm-arm/arch-s3c2410/dma.h delete mode 100644 include/asm-arm/arch-s3c2410/entry-macro.S delete mode 100644 include/asm-arm/arch-s3c2410/fb.h delete mode 100644 include/asm-arm/arch-s3c2410/gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/h1940-latch.h delete mode 100644 include/asm-arm/arch-s3c2410/h1940.h delete mode 100644 include/asm-arm/arch-s3c2410/hardware.h delete mode 100644 include/asm-arm/arch-s3c2410/idle.h delete mode 100644 include/asm-arm/arch-s3c2410/io.h delete mode 100644 include/asm-arm/arch-s3c2410/irqs.h delete mode 100644 include/asm-arm/arch-s3c2410/leds-gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/map.h delete mode 100644 include/asm-arm/arch-s3c2410/memory.h delete mode 100644 include/asm-arm/arch-s3c2410/osiris-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/osiris-map.h delete mode 100644 include/asm-arm/arch-s3c2410/otom-map.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-clock.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-dsc.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-gpioj.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-lcd.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-mem.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-power.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2412.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-sdi.h delete mode 100644 include/asm-arm/arch-s3c2410/reset.h delete mode 100644 include/asm-arm/arch-s3c2410/spi-gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/spi.h delete mode 100644 include/asm-arm/arch-s3c2410/system-reset.h delete mode 100644 include/asm-arm/arch-s3c2410/system.h delete mode 100644 include/asm-arm/arch-s3c2410/timex.h delete mode 100644 include/asm-arm/arch-s3c2410/uncompress.h delete mode 100644 include/asm-arm/arch-s3c2410/usb-control.h delete mode 100644 include/asm-arm/arch-s3c2410/vmalloc.h delete mode 100644 include/asm-arm/arch-s3c2410/vr1000-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/vr1000-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/vr1000-map.h delete mode 100644 include/asm-arm/arch-sa1100/SA-1100.h delete mode 100644 include/asm-arm/arch-sa1100/SA-1101.h delete mode 100644 include/asm-arm/arch-sa1100/SA-1111.h delete mode 100644 include/asm-arm/arch-sa1100/assabet.h delete mode 100644 include/asm-arm/arch-sa1100/badge4.h delete mode 100644 include/asm-arm/arch-sa1100/bitfield.h delete mode 100644 include/asm-arm/arch-sa1100/cerf.h delete mode 100644 include/asm-arm/arch-sa1100/collie.h delete mode 100644 include/asm-arm/arch-sa1100/debug-macro.S delete mode 100644 include/asm-arm/arch-sa1100/dma.h delete mode 100644 include/asm-arm/arch-sa1100/entry-macro.S delete mode 100644 include/asm-arm/arch-sa1100/gpio.h delete mode 100644 include/asm-arm/arch-sa1100/h3600.h delete mode 100644 include/asm-arm/arch-sa1100/h3600_gpio.h delete mode 100644 include/asm-arm/arch-sa1100/hardware.h delete mode 100644 include/asm-arm/arch-sa1100/ide.h delete mode 100644 include/asm-arm/arch-sa1100/io.h delete mode 100644 include/asm-arm/arch-sa1100/irqs.h delete mode 100644 include/asm-arm/arch-sa1100/jornada720.h delete mode 100644 include/asm-arm/arch-sa1100/lart.h delete mode 100644 include/asm-arm/arch-sa1100/mcp.h delete mode 100644 include/asm-arm/arch-sa1100/memory.h delete mode 100644 include/asm-arm/arch-sa1100/mtd-xip.h delete mode 100644 include/asm-arm/arch-sa1100/neponset.h delete mode 100644 include/asm-arm/arch-sa1100/shannon.h delete mode 100644 include/asm-arm/arch-sa1100/simpad.h delete mode 100644 include/asm-arm/arch-sa1100/system.h delete mode 100644 include/asm-arm/arch-sa1100/timex.h delete mode 100644 include/asm-arm/arch-sa1100/uncompress.h delete mode 100644 include/asm-arm/arch-sa1100/vmalloc.h delete mode 100644 include/asm-arm/arch-shark/debug-macro.S delete mode 100644 include/asm-arm/arch-shark/dma.h delete mode 100644 include/asm-arm/arch-shark/entry-macro.S delete mode 100644 include/asm-arm/arch-shark/hardware.h delete mode 100644 include/asm-arm/arch-shark/io.h delete mode 100644 include/asm-arm/arch-shark/irqs.h delete mode 100644 include/asm-arm/arch-shark/memory.h delete mode 100644 include/asm-arm/arch-shark/system.h delete mode 100644 include/asm-arm/arch-shark/timex.h delete mode 100644 include/asm-arm/arch-shark/uncompress.h delete mode 100644 include/asm-arm/arch-shark/vmalloc.h delete mode 100644 include/asm-arm/arch-versatile/debug-macro.S delete mode 100644 include/asm-arm/arch-versatile/dma.h delete mode 100644 include/asm-arm/arch-versatile/entry-macro.S delete mode 100644 include/asm-arm/arch-versatile/hardware.h delete mode 100644 include/asm-arm/arch-versatile/io.h delete mode 100644 include/asm-arm/arch-versatile/irqs.h delete mode 100644 include/asm-arm/arch-versatile/memory.h delete mode 100644 include/asm-arm/arch-versatile/platform.h delete mode 100644 include/asm-arm/arch-versatile/system.h delete mode 100644 include/asm-arm/arch-versatile/timex.h delete mode 100644 include/asm-arm/arch-versatile/uncompress.h delete mode 100644 include/asm-arm/arch-versatile/vmalloc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h deleted file mode 100644 index a6d1ee0980f..00000000000 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/aaec2000.h - * - * AAEC-2000 registers definition - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_AAEC2000_H -#define __ASM_ARCH_AAEC2000_H - -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not this file -#endif /* __ASM_ARCH_HARDWARE_H */ - -/* Chip selects */ -#define AAEC_CS0 0x00000000 -#define AAEC_CS1 0x10000000 -#define AAEC_CS2 0x20000000 -#define AAEC_CS3 0x30000000 - -/* Flash */ -#define AAEC_FLASH_BASE AAEC_CS0 -#define AAEC_FLASH_SIZE SZ_64M - -/* Interrupt controller */ -#define IRQ_BASE __REG(0x80000500) -#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */ -#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */ -#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */ -#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */ - -/* UART 1 */ -#define UART1_BASE __REG(0x80000600) -#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */ -#define UART1_LCR __REG(0x80000604) /* Link Control Register */ -#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */ -#define UART1_CR __REG(0x8000060c) /* Control Register */ -#define UART1_SR __REG(0x80000610) /* Status Register */ -#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */ -#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */ -#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */ - -/* UART 2 */ -#define UART2_BASE __REG(0x80000700) -#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */ -#define UART2_LCR __REG(0x80000704) /* Link Control Register */ -#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */ -#define UART2_CR __REG(0x8000070c) /* Control Register */ -#define UART2_SR __REG(0x80000710) /* Status Register */ -#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */ -#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */ -#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */ - -/* UART 3 */ -#define UART3_BASE __REG(0x80000800) -#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */ -#define UART3_LCR __REG(0x80000804) /* Link Control Register */ -#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */ -#define UART3_CR __REG(0x8000080c) /* Control Register */ -#define UART3_SR __REG(0x80000810) /* Status Register */ -#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */ -#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */ -#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */ - -/* These are used in some places */ -#define _UART1_BASE __PREG(UART1_BASE) -#define _UART2_BASE __PREG(UART2_BASE) -#define _UART3_BASE __PREG(UART3_BASE) - -/* UART Registers Offsets */ -#define UART_DR 0x00 -#define UART_LCR 0x04 -#define UART_BRCR 0x08 -#define UART_CR 0x0c -#define UART_SR 0x10 -#define UART_INT 0x14 -#define UART_INTM 0x18 -#define UART_INTRES 0x1c - -/* UART_LCR Bitmask */ -#define UART_LCR_BRK (1 << 0) /* Send Break */ -#define UART_LCR_PEN (1 << 1) /* Parity Enable */ -#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */ -#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */ -#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */ -#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */ -#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */ -#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */ -#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */ - -/* UART_CR Bitmask */ -#define UART_CR_EN (1 << 0) /* UART Enable */ -#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */ -#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */ -#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */ -#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */ -#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */ -#define UART_CR_LOOP (1 << 6) /* Loopback Mode */ - -/* UART_SR Bitmask */ -#define UART_SR_CTS (1 << 0) /* Clear To Send Status */ -#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */ -#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */ -#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */ -#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */ -#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */ -#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */ -#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */ - -/* UART_INT Bitmask */ -#define UART_INT_RIS (1 << 0) /* Rx Interrupt */ -#define UART_INT_TIS (1 << 1) /* Tx Interrupt */ -#define UART_INT_MIS (1 << 2) /* Modem Interrupt */ -#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */ - -/* Timer 1 */ -#define TIMER1_BASE __REG(0x80000c00) -#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */ -#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */ -#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */ -#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */ - -/* Timer 2 */ -#define TIMER2_BASE __REG(0x80000d00) -#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */ -#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */ -#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */ -#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */ - -/* Timer 3 */ -#define TIMER3_BASE __REG(0x80000e00) -#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */ -#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */ -#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */ -#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */ - -/* Timer Control register bits */ -#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */ -#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */ -#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */ -#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */ -#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */ - -/* Power and State Control */ -#define POWER_BASE __REG(0x80000400) -#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */ -#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */ -#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */ -#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */ -#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */ -#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */ -#define POWER_TEOI __REG(0x80000418) /* Tick EoI */ -#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */ -#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */ - -/* GPIO Registers */ -#define AAEC_GPIO_PHYS 0x80000e00 - -#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00) -#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04) -#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08) -#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c) -#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10) -#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14) -#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18) -#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c) -#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20) -#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24) -#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28) -#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c) -#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30) -#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34) -#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38) -#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c) -#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40) -#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44) -#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48) -#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c) -#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50) -#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54) -#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58) -#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c) -#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60) -#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64) -#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68) -#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c) -#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70) -#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74) -#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78) -#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c) -#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80) -#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84) - -#define AAEC_GPIO_PINMUX_PE0CON (1 << 0) -#define AAEC_GPIO_PINMUX_PD0CON (1 << 1) -#define AAEC_GPIO_PINMUX_CODECON (1 << 2) -#define AAEC_GPIO_PINMUX_UART3CON (1 << 3) - -/* LCD Controller */ -#define AAEC_CLCD_PHYS 0x80003000 - -#endif /* __ARM_ARCH_AAEC2000_H */ diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h deleted file mode 100644 index bc76d2badb9..00000000000 --- a/include/asm-arm/arch-aaec2000/aaed2000.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/aaed2000.h - * - * AAED-2000 specific bits definition - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_AAED2000_H -#define __ASM_ARCH_AAED2000_H - -/* External GPIOs. */ - -#define EXT_GPIO_PBASE AAEC_CS3 -#define EXT_GPIO_VBASE 0xf8100000 -#define EXT_GPIO_LENGTH 0x00001000 - -#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE) -#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE) - -#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x))) -#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x))) - -#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE) - -#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */ -#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */ -#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */ -#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */ -#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */ -#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */ -#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */ -#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */ - - -#endif /* __ARM_ARCH_AAED2000_H */ diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S deleted file mode 100644 index 7b1fce021d8..00000000000 --- a/include/asm-arm/arch-aaec2000/debug-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/include/asm-arm/arch-aaec2000/debug-macro.S - * - * Debugging macro include header - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include "hardware.h" - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical - movne \rx, #io_p2v(0x80000000) @ virtual - orr \rx, \rx, #0x00000800 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x10] - tst \rd, #(1 << 7) - beq 1002b - .endm - - .macro waituart,rd,rx -#if 0 -1001: ldr \rd, [\rx, #0x10] - tst \rd, #(1 << 5) - beq 1001b -#endif - .endm diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h deleted file mode 100644 index e100b1e526f..00000000000 --- a/include/asm-arm/arch-aaec2000/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/dma.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S deleted file mode 100644 index 83fdf68f6b7..00000000000 --- a/include/asm-arm/arch-aaec2000/entry-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/entry-macro.S - * - * Low-level IRQ helper for aaec-2000 based platforms - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xf8000000 - add r4, r4, #0x00000500 - mov \base, r4 - ldr \irqstat, [\base, #0] - cmp \irqstat, #0 - bne 1001f - ldr \irqnr, =NR_IRQS+1 - b 1003f -1001: mov \irqnr, #0 -1002: ands \tmp, \irqstat, #1 - mov \irqstat, \irqstat, LSR #1 - add \irqnr, \irqnr, #1 - beq 1002b - sub \irqnr, \irqnr, #1 -1003: - .endm diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h deleted file mode 100644 index 153506fd06e..00000000000 --- a/include/asm-arm/arch-aaec2000/hardware.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/hardware.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* The kernel is loaded at physical address 0xf8000000. - * We map the IO space a bit after - */ -#define PIO_APB_BASE 0x80000000 -#define VIO_APB_BASE 0xf8000000 -#define IO_APB_LENGTH 0x2000 -#define PIO_AHB_BASE 0x80002000 -#define VIO_AHB_BASE 0xf8002000 -#define IO_AHB_LENGTH 0x2000 - -#define VIO_BASE VIO_APB_BASE -#define PIO_BASE PIO_APB_BASE - -#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE ) -#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE ) - -#ifndef __ASSEMBLY__ - -#include - -/* FIXME: Is it needed to optimize this a la pxa ?? */ -#define __REG(x) (*((volatile u32 *)io_p2v(x))) -#define __PREG(x) (io_v2p((u32)&(x))) - -#else /* __ASSEMBLY__ */ - -#define __REG(x) io_p2v(x) -#define __PREG(x) io_v2p(x) - -#endif - -#include "aaec2000.h" - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h deleted file mode 100644 index bc2364ab875..00000000000 --- a/include/asm-arm/arch-aaec2000/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/io.h - * - * Copied from asm/arch/sa1100/io.h - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h deleted file mode 100644 index de252220e80..00000000000 --- a/include/asm-arm/arch-aaec2000/irqs.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/irqs.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */ -#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */ -#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */ -#define INT_MV_FIQ 3 /* Media Changed Interrupt */ -#define INT_SC 4 /* Sound Codec Interrupt */ -#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */ -#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */ -#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */ -#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */ -#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */ -#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */ -#define INT_TICK 11 /* 64Hz Tick Interrupt */ -#define INT_UART1 12 /* UART1 Interrupt */ -#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */ -#define INT_LCD 14 /* LCD Interrupt */ -#define INT_SSI 15 /* SSI End of Transfer Interrupt */ -#define INT_UART3 16 /* UART3 Interrupt */ -#define INT_SCI 17 /* SCI Interrupt */ -#define INT_AAC 18 /* Advanced Audio Codec Interrupt */ -#define INT_MMC 19 /* MMC Interrupt */ -#define INT_USB 20 /* USB Interrupt */ -#define INT_DMA 21 /* DMA Interrupt */ -#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */ -#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */ -#define INT_BMI 27 /* BMI Interrupt */ - -#define NR_IRQS (INT_BMI + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h deleted file mode 100644 index 9eceb414892..00000000000 --- a/include/asm-arm/arch-aaec2000/memory.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/memory.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - - -#define PHYS_OFFSET UL(0xf0000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * The nodes are the followings: - * - * node 0: 0xf000.0000 - 0xf3ff.ffff - * node 1: 0xf400.0000 - 0xf7ff.ffff - * node 2: 0xf800.0000 - 0xfbff.ffff - * node 3: 0xfc00.0000 - 0xffff.ffff - */ -#define NODE_MEM_SIZE_BITS 26 - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h deleted file mode 100644 index 08de97b407a..00000000000 --- a/include/asm-arm/arch-aaec2000/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaed2000/system.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h deleted file mode 100644 index f5708b38fb7..00000000000 --- a/include/asm-arm/arch-aaec2000/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/timex.h - * - * AAEC-2000 Architecture timex specification - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 508000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h deleted file mode 100644 index 300f4bf3bc7..00000000000 --- a/include/asm-arm/arch-aaec2000/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/uncompress.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include "hardware.h" - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -static void putc(int c) -{ - unsigned long serial_port; - do { - serial_port = _UART3_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - serial_port = _UART1_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - serial_port = _UART2_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - return; - } while (0); - - /* wait for space in the UART's transmitter */ - while ((UART(UART_SR) & UART_SR_TxFF)) - barrier(); - - /* send the character out. */ - UART(UART_DR) = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h deleted file mode 100644 index ecb991e2e4f..00000000000 --- a/include/asm-arm/arch-aaec2000/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/vmalloc.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h deleted file mode 100644 index 6d71ea2637b..00000000000 --- a/include/asm-arm/arch-at91/at91_adc.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_adc.h - * - * Copyright (C) SAN People - * - * Analog-to-Digital Converter (ADC) registers. - * Based on AT91SAM9260 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ADC_H -#define AT91_ADC_H - -#define AT91_ADC_CR 0x00 /* Control Register */ -#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ -#define AT91_ADC_START (1 << 1) /* Start Conversion */ - -#define AT91_ADC_MR 0x04 /* Mode Register */ -#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ -#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ -#define AT91_ADC_TRGSEL_TC0 (0 << 1) -#define AT91_ADC_TRGSEL_TC1 (1 << 1) -#define AT91_ADC_TRGSEL_TC2 (2 << 1) -#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) -#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ -#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ -#define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ -#define AT91_ADC_STARTUP_(x) ((x) << 16) -#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ -#define AT91_ADC_SHTIM_(x) ((x) << 24) - -#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ -#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ -#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ -#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ - -#define AT91_ADC_SR 0x1C /* Status Register */ -#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ -#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ -#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ -#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ -#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ -#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ - -#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ -#define AT91_ADC_LDATA (0x3ff) - -#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ - -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ -#define AT91_ADC_DATA (0x3ff) - -#endif diff --git a/include/asm-arm/arch-at91/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h deleted file mode 100644 index df44c12a12d..00000000000 --- a/include/asm-arm/arch-at91/at91_aic.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_aic.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Advanced Interrupt Controller (AIC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_AIC_H -#define AT91_AIC_H - -#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */ -#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ -#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ -#define AT91_AIC_SRCTYPE_LOW (0 << 5) -#define AT91_AIC_SRCTYPE_FALLING (1 << 5) -#define AT91_AIC_SRCTYPE_HIGH (2 << 5) -#define AT91_AIC_SRCTYPE_RISING (3 << 5) - -#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ -#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */ -#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */ -#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */ -#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ - -#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */ -#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */ -#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */ -#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ -#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ - -#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */ -#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */ -#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */ -#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */ -#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */ -#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */ -#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */ -#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ -#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ - -#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ -#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ -#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h deleted file mode 100644 index 8019ffd0ad3..00000000000 --- a/include/asm-arm/arch-at91/at91_dbgu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_dbgu.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Debug Unit (DBGU) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_DBGU_H -#define AT91_DBGU_H - -#ifdef AT91_DBGU -#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ -#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ -#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ -#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ -#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ - -#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ -#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */ -#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ - -#endif /* AT91_DBGU */ - -/* - * Some AT91 parts that don't have full DEBUG units still support the ID - * and extensions register. - */ -#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ -#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ -#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ -#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ -#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ -#define AT91_CIDR_SRAMSIZ_1K (1 << 16) -#define AT91_CIDR_SRAMSIZ_2K (2 << 16) -#define AT91_CIDR_SRAMSIZ_112K (4 << 16) -#define AT91_CIDR_SRAMSIZ_4K (5 << 16) -#define AT91_CIDR_SRAMSIZ_80K (6 << 16) -#define AT91_CIDR_SRAMSIZ_160K (7 << 16) -#define AT91_CIDR_SRAMSIZ_8K (8 << 16) -#define AT91_CIDR_SRAMSIZ_16K (9 << 16) -#define AT91_CIDR_SRAMSIZ_32K (10 << 16) -#define AT91_CIDR_SRAMSIZ_64K (11 << 16) -#define AT91_CIDR_SRAMSIZ_128K (12 << 16) -#define AT91_CIDR_SRAMSIZ_256K (13 << 16) -#define AT91_CIDR_SRAMSIZ_96K (14 << 16) -#define AT91_CIDR_SRAMSIZ_512K (15 << 16) -#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ -#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ -#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h deleted file mode 100644 index 400ec10014b..00000000000 --- a/include/asm-arm/arch-at91/at91_mci.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_mci.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * MultiMedia Card Interface (MCI) registers. - * Based on AT91RM9200 datasheet revision F. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_MCI_H -#define AT91_MCI_H - -#define AT91_MCI_CR 0x00 /* Control Register */ -#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */ -#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */ -#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */ -#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */ -#define AT91_MCI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_MCI_MR 0x04 /* Mode Register */ -#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ -#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ -#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ -#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ -#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ -#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ -#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ -#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ - -#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */ -#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */ -#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */ -#define AT91_MCI_DTOMUL_1 (0 << 4) -#define AT91_MCI_DTOMUL_16 (1 << 4) -#define AT91_MCI_DTOMUL_128 (2 << 4) -#define AT91_MCI_DTOMUL_256 (3 << 4) -#define AT91_MCI_DTOMUL_1K (4 << 4) -#define AT91_MCI_DTOMUL_4K (5 << 4) -#define AT91_MCI_DTOMUL_64K (6 << 4) -#define AT91_MCI_DTOMUL_1M (7 << 4) - -#define AT91_MCI_SDCR 0x0c /* SD Card Register */ -#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */ -#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ - -#define AT91_MCI_ARGR 0x10 /* Argument Register */ - -#define AT91_MCI_CMDR 0x14 /* Command Register */ -#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */ -#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */ -#define AT91_MCI_RSPTYP_NONE (0 << 6) -#define AT91_MCI_RSPTYP_48 (1 << 6) -#define AT91_MCI_RSPTYP_136 (2 << 6) -#define AT91_MCI_SPCMD (7 << 8) /* Special Command */ -#define AT91_MCI_SPCMD_NONE (0 << 8) -#define AT91_MCI_SPCMD_INIT (1 << 8) -#define AT91_MCI_SPCMD_SYNC (2 << 8) -#define AT91_MCI_SPCMD_ICMD (4 << 8) -#define AT91_MCI_SPCMD_IRESP (5 << 8) -#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */ -#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */ -#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */ -#define AT91_MCI_TRCMD_NONE (0 << 16) -#define AT91_MCI_TRCMD_START (1 << 16) -#define AT91_MCI_TRCMD_STOP (2 << 16) -#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */ -#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */ -#define AT91_MCI_TRTYP_BLOCK (0 << 19) -#define AT91_MCI_TRTYP_MULTIPLE (1 << 19) -#define AT91_MCI_TRTYP_STREAM (2 << 19) - -#define AT91_MCI_BLKR 0x18 /* Block Register */ -#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ -#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */ - -#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ -#define AT91_MCR_RDR 0x30 /* Receive Data Register */ -#define AT91_MCR_TDR 0x34 /* Transmit Data Register */ - -#define AT91_MCI_SR 0x40 /* Status Register */ -#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */ -#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ -#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */ -#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */ -#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */ -#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */ -#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ -#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ -#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ -#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ -#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ -#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ -#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ -#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ -#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ -#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ -#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ -#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ -#define AT91_MCI_OVRE (1 << 30) /* Overrun */ -#define AT91_MCI_UNRE (1 << 31) /* Underrun */ - -#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */ -#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h deleted file mode 100644 index 84c3866d309..00000000000 --- a/include/asm-arm/arch-at91/at91_pio.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_pio.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Parallel I/O Controller (PIO) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIO_H -#define AT91_PIO_H - -#define PIO_PER 0x00 /* Enable Register */ -#define PIO_PDR 0x04 /* Disable Register */ -#define PIO_PSR 0x08 /* Status Register */ -#define PIO_OER 0x10 /* Output Enable Register */ -#define PIO_ODR 0x14 /* Output Disable Register */ -#define PIO_OSR 0x18 /* Output Status Register */ -#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ -#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ -#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ -#define PIO_SODR 0x30 /* Set Output Data Register */ -#define PIO_CODR 0x34 /* Clear Output Data Register */ -#define PIO_ODSR 0x38 /* Output Data Status Register */ -#define PIO_PDSR 0x3c /* Pin Data Status Register */ -#define PIO_IER 0x40 /* Interrupt Enable Register */ -#define PIO_IDR 0x44 /* Interrupt Disable Register */ -#define PIO_IMR 0x48 /* Interrupt Mask Register */ -#define PIO_ISR 0x4c /* Interrupt Status Register */ -#define PIO_MDER 0x50 /* Multi-driver Enable Register */ -#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ -#define PIO_MDSR 0x58 /* Multi-driver Status Register */ -#define PIO_PUDR 0x60 /* Pull-up Disable Register */ -#define PIO_PUER 0x64 /* Pull-up Enable Register */ -#define PIO_PUSR 0x68 /* Pull-up Status Register */ -#define PIO_ASR 0x70 /* Peripheral A Select Register */ -#define PIO_BSR 0x74 /* Peripheral B Select Register */ -#define PIO_ABSR 0x78 /* AB Status Register */ -#define PIO_OWER 0xa0 /* Output Write Enable Register */ -#define PIO_OWDR 0xa4 /* Output Write Disable Register */ -#define PIO_OWSR 0xa8 /* Output Write Status Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h deleted file mode 100644 index 5026325a5ae..00000000000 --- a/include/asm-arm/arch-at91/at91_pit.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_pit.h - * - * Periodic Interval Timer (PIT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIT_H -#define AT91_PIT_H - -#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h deleted file mode 100644 index 2001e81f226..00000000000 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_pmc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Power Management Controller (PMC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PMC_H -#define AT91_PMC_H - -#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ -#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ - -#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ -#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ -#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ -#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ -#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ -#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ -#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ -#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ - -#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ -#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ -#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ - -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ -#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ -#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ -#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ - -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ -#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ -#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ - -#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ -#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ -#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ - -#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ -#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ -#define AT91_PMC_DIV (0xff << 0) /* Divider */ -#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ -#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ -#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ -#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ -#define AT91_PMC_USBDIV_1 (0 << 28) -#define AT91_PMC_USBDIV_2 (1 << 28) -#define AT91_PMC_USBDIV_4 (2 << 28) -#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ - -#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ -#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ -#define AT91_PMC_CSS_SLOW (0 << 0) -#define AT91_PMC_CSS_MAIN (1 << 0) -#define AT91_PMC_CSS_PLLA (2 << 0) -#define AT91_PMC_CSS_PLLB (3 << 0) -#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) -#define AT91_PMC_PRES_2 (1 << 2) -#define AT91_PMC_PRES_4 (2 << 2) -#define AT91_PMC_PRES_8 (3 << 2) -#define AT91_PMC_PRES_16 (4 << 2) -#define AT91_PMC_PRES_32 (5 << 2) -#define AT91_PMC_PRES_64 (6 << 2) -#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ -#define AT91RM9200_PMC_MDIV_2 (1 << 8) -#define AT91RM9200_PMC_MDIV_3 (2 << 8) -#define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ -#define AT91SAM9_PMC_MDIV_2 (1 << 8) -#define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) -#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ -#define AT91_PMC_PDIV_1 (0 << 12) -#define AT91_PMC_PDIV_2 (1 << 12) - -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ - -#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ -#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ -#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ -#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ -#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ -#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ -#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ -#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h deleted file mode 100644 index fb8d1618a23..00000000000 --- a/include/asm-arm/arch-at91/at91_rstc.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_rstc.h - * - * Reset Controller (RSTC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RSTC_H -#define AT91_RSTC_H - -#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ -#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ -#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ -#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ -#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ -#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ -#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) -#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) -#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) -#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) -#define AT91_RSTC_RSTTYP_USER (4 << 8) -#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ -#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ - -#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ -#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ -#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ -#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h deleted file mode 100644 index af9bd28174c..00000000000 --- a/include/asm-arm/arch-at91/at91_rtc.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_rtc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Real Time Clock (RTC) - System peripheral registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTC_H -#define AT91_RTC_H - -#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */ -#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ -#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ -#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ -#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) -#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) - -#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ - -#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ -#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ -#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ - -#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ -#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ -#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ -#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ -#define AT91_RTC_DAY (7 << 21) /* Current Day */ -#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ - -#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */ -#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ -#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ -#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ - -#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */ -#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ -#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ - -#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */ -#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ -#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ -#define AT91_RTC_SECEV (1 << 2) /* Second Event */ -#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ -#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ - -#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */ -#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */ -#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */ -#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */ - -#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */ -#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ -#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ -#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h deleted file mode 100644 index 39a32633b27..00000000000 --- a/include/asm-arm/arch-at91/at91_rtt.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_rtt.h - * - * Real-time Timer (RTT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTT_H -#define AT91_RTT_H - -#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ -#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ -#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ -#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ -#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ - -#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ -#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ - -#define AT91_RTT_VR 0x08 /* Real-time Value Register */ -#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ - -#define AT91_RTT_SR 0x0c /* Real-time Status Register */ -#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ -#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h deleted file mode 100644 index 581fa41d90e..00000000000 --- a/include/asm-arm/arch-at91/at91_shdwc.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_shdwc.h - * - * Shutdown Controller (SHDWC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SHDWC_H -#define AT91_SHDWC_H - -#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */ -#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */ -#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */ -#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ -#define AT91_SHDW_WKMODE0_NONE 0 -#define AT91_SHDW_WKMODE0_HIGH 1 -#define AT91_SHDW_WKMODE0_LOW 2 -#define AT91_SHDW_WKMODE0_ANYLEVEL 3 -#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0_(x) ((x) << 4) -#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ - -#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ -#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ -#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ -#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h deleted file mode 100644 index f9b9a846499..00000000000 --- a/include/asm-arm/arch-at91/at91_spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_spi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Serial Peripheral Interface (SPI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SPI_H -#define AT91_SPI_H - -#define AT91_SPI_CR 0x00 /* Control Register */ -#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ -#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ -#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_MR 0x04 /* Mode Register */ -#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ -#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ -#define AT91_SPI_PS_FIXED (0 << 1) -#define AT91_SPI_PS_VARIABLE (1 << 1) -#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ -#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ -#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ - -#define AT91_SPI_RDR 0x08 /* Receive Data Register */ -#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ - -#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ -#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_SR 0x10 /* Status Register */ -#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ -#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ -#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ -#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ -#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ -#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ -#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ -#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ -#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ -#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ -#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ - -#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ -#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ -#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ -#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ -#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ -#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ -#define AT91_SPI_BITS_8 (0 << 4) -#define AT91_SPI_BITS_9 (1 << 4) -#define AT91_SPI_BITS_10 (2 << 4) -#define AT91_SPI_BITS_11 (3 << 4) -#define AT91_SPI_BITS_12 (4 << 4) -#define AT91_SPI_BITS_13 (5 << 4) -#define AT91_SPI_BITS_14 (6 << 4) -#define AT91_SPI_BITS_15 (7 << 4) -#define AT91_SPI_BITS_16 (8 << 4) -#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ -#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ -#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h deleted file mode 100644 index 0ecc73460b5..00000000000 --- a/include/asm-arm/arch-at91/at91_ssc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_ssc.h - * - * Copyright (C) SAN People - * - * Serial Synchronous Controller (SSC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SSC_H -#define AT91_SSC_H - -#define AT91_SSC_CR 0x00 /* Control Register */ -#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ -#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ -#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ -#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ -#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ - -#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ -#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ - -#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ -#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ -#define AT91_SSC_CKS_DIV (0 << 0) -#define AT91_SSC_CKS_CLOCK (1 << 0) -#define AT91_SSC_CKS_PIN (2 << 0) -#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ -#define AT91_SSC_CKO_NONE (0 << 2) -#define AT91_SSC_CKO_CONTINUOUS (1 << 2) -#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ -#define AT91_SSC_CKI_FALLING (0 << 5) -#define AT91_SSC_CK_RISING (1 << 5) -#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ -#define AT91_SSC_CKG_NONE (0 << 6) -#define AT91_SSC_CKG_RFLOW (1 << 6) -#define AT91_SSC_CKG_RFHIGH (2 << 6) -#define AT91_SSC_START (0xf << 8) /* Start Selection */ -#define AT91_SSC_START_CONTINUOUS (0 << 8) -#define AT91_SSC_START_TX_RX (1 << 8) -#define AT91_SSC_START_LOW_RF (2 << 8) -#define AT91_SSC_START_HIGH_RF (3 << 8) -#define AT91_SSC_START_FALLING_RF (4 << 8) -#define AT91_SSC_START_RISING_RF (5 << 8) -#define AT91_SSC_START_LEVEL_RF (6 << 8) -#define AT91_SSC_START_EDGE_RF (7 << 8) -#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ -#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ -#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ - -#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ -#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ -#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ -#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ -#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ -#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ -#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ -#define AT91_SSC_FSOS_NONE (0 << 20) -#define AT91_SSC_FSOS_NEGATIVE (1 << 20) -#define AT91_SSC_FSOS_POSITIVE (2 << 20) -#define AT91_SSC_FSOS_LOW (3 << 20) -#define AT91_SSC_FSOS_HIGH (4 << 20) -#define AT91_SSC_FSOS_TOGGLE (5 << 20) -#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ -#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) -#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) - -#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ -#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ -#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ -#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ - -#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ -#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ -#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ -#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ - -#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ -#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ - -#define AT91_SSC_SR 0x40 /* Status Register */ -#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ -#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ -#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ -#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ -#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ -#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ -#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ -#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ -#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ -#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ -#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ -#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ -#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ -#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ - -#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ -#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_st.h b/include/asm-arm/arch-at91/at91_st.h deleted file mode 100644 index 30446e2ea77..00000000000 --- a/include/asm-arm/arch-at91/at91_st.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_st.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * System Timer (ST) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ST_H -#define AT91_ST_H - -#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ -#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ - -#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ -#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ - -#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ -#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ -#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ -#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ - -#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ -#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ - -#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ -#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ -#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ -#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ -#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ - -#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ -#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ -#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ - -#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ -#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ - -#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ -#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h deleted file mode 100644 index b85d3faeef5..00000000000 --- a/include/asm-arm/arch-at91/at91_tc.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_tc.h - * - * Copyright (C) SAN People - * - * Timer/Counter Unit (TC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TC_H -#define AT91_TC_H - -#define AT91_TC_BCR 0xc0 /* TC Block Control Register */ -#define AT91_TC_SYNC (1 << 0) /* Synchro Command */ - -#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */ -#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */ -#define AT91_TC_TC0XC0S_TCLK0 (0 << 0) -#define AT91_TC_TC0XC0S_NONE (1 << 0) -#define AT91_TC_TC0XC0S_TIOA1 (2 << 0) -#define AT91_TC_TC0XC0S_TIOA2 (3 << 0) -#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */ -#define AT91_TC_TC1XC1S_TCLK1 (0 << 2) -#define AT91_TC_TC1XC1S_NONE (1 << 2) -#define AT91_TC_TC1XC1S_TIOA0 (2 << 2) -#define AT91_TC_TC1XC1S_TIOA2 (3 << 2) -#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */ -#define AT91_TC_TC2XC2S_TCLK2 (0 << 4) -#define AT91_TC_TC2XC2S_NONE (1 << 4) -#define AT91_TC_TC2XC2S_TIOA0 (2 << 4) -#define AT91_TC_TC2XC2S_TIOA1 (3 << 4) - - -#define AT91_TC_CCR 0x00 /* Channel Control Register */ -#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */ -#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */ -#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */ - -#define AT91_TC_CMR 0x04 /* Channel Mode Register */ -#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */ -#define AT91_TC_TIMER_CLOCK1 (0 << 0) -#define AT91_TC_TIMER_CLOCK2 (1 << 0) -#define AT91_TC_TIMER_CLOCK3 (2 << 0) -#define AT91_TC_TIMER_CLOCK4 (3 << 0) -#define AT91_TC_TIMER_CLOCK5 (4 << 0) -#define AT91_TC_XC0 (5 << 0) -#define AT91_TC_XC1 (6 << 0) -#define AT91_TC_XC2 (7 << 0) -#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */ -#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */ -#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */ -#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */ -#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */ -#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */ -#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */ -#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */ -#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */ -#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */ - -#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */ -#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */ -#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */ -#define AT91_TC_EEVTEDG_NONE (0 << 8) -#define AT91_TC_EEVTEDG_RISING (1 << 8) -#define AT91_TC_EEVTEDG_FALLING (2 << 8) -#define AT91_TC_EEVTEDG_BOTH (3 << 8) -#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */ -#define AT91_TC_EEVT_TIOB (0 << 10) -#define AT91_TC_EEVT_XC0 (1 << 10) -#define AT91_TC_EEVT_XC1 (2 << 10) -#define AT91_TC_EEVT_XC2 (3 << 10) -#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */ -#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */ -#define AT91_TC_WAVESEL_UP (0 << 13) -#define AT91_TC_WAVESEL_UP_AUTO (2 << 13) -#define AT91_TC_WAVESEL_UPDOWN (1 << 13) -#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13) -#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */ -#define AT91_TC_ACPA_NONE (0 << 16) -#define AT91_TC_ACPA_SET (1 << 16) -#define AT91_TC_ACPA_CLEAR (2 << 16) -#define AT91_TC_ACPA_TOGGLE (3 << 16) -#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */ -#define AT91_TC_ACPC_NONE (0 << 18) -#define AT91_TC_ACPC_SET (1 << 18) -#define AT91_TC_ACPC_CLEAR (2 << 18) -#define AT91_TC_ACPC_TOGGLE (3 << 18) -#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */ -#define AT91_TC_AEEVT_NONE (0 << 20) -#define AT91_TC_AEEVT_SET (1 << 20) -#define AT91_TC_AEEVT_CLEAR (2 << 20) -#define AT91_TC_AEEVT_TOGGLE (3 << 20) -#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */ -#define AT91_TC_ASWTRG_NONE (0 << 22) -#define AT91_TC_ASWTRG_SET (1 << 22) -#define AT91_TC_ASWTRG_CLEAR (2 << 22) -#define AT91_TC_ASWTRG_TOGGLE (3 << 22) -#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */ -#define AT91_TC_BCPB_NONE (0 << 24) -#define AT91_TC_BCPB_SET (1 << 24) -#define AT91_TC_BCPB_CLEAR (2 << 24) -#define AT91_TC_BCPB_TOGGLE (3 << 24) -#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */ -#define AT91_TC_BCPC_NONE (0 << 26) -#define AT91_TC_BCPC_SET (1 << 26) -#define AT91_TC_BCPC_CLEAR (2 << 26) -#define AT91_TC_BCPC_TOGGLE (3 << 26) -#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */ -#define AT91_TC_BEEVT_NONE (0 << 28) -#define AT91_TC_BEEVT_SET (1 << 28) -#define AT91_TC_BEEVT_CLEAR (2 << 28) -#define AT91_TC_BEEVT_TOGGLE (3 << 28) -#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */ -#define AT91_TC_BSWTRG_NONE (0 << 30) -#define AT91_TC_BSWTRG_SET (1 << 30) -#define AT91_TC_BSWTRG_CLEAR (2 << 30) -#define AT91_TC_BSWTRG_TOGGLE (3 << 30) - -#define AT91_TC_CV 0x10 /* Counter Value */ -#define AT91_TC_RA 0x14 /* Register A */ -#define AT91_TC_RB 0x18 /* Register B */ -#define AT91_TC_RC 0x1c /* Register C */ - -#define AT91_TC_SR 0x20 /* Status Register */ -#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */ -#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */ -#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */ -#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */ -#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */ -#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */ -#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */ -#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */ -#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */ -#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */ -#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */ - -#define AT91_TC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h deleted file mode 100644 index f9f2e3cd95c..00000000000 --- a/include/asm-arm/arch-at91/at91_twi.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_twi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Two-wire Interface (TWI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TWI_H -#define AT91_TWI_H - -#define AT91_TWI_CR 0x00 /* Control Register */ -#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ -#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ -#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ -#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ -#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ -#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ -#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_TWI_MMR 0x04 /* Master Mode Register */ -#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ -#define AT91_TWI_IADRSZ_NO (0 << 8) -#define AT91_TWI_IADRSZ_1 (1 << 8) -#define AT91_TWI_IADRSZ_2 (2 << 8) -#define AT91_TWI_IADRSZ_3 (3 << 8) -#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ -#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ - -#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ -#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ - -#define AT91_TWI_IADR 0x0c /* Internal Address Register */ - -#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ -#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ -#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ -#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ - -#define AT91_TWI_SR 0x20 /* Status Register */ -#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ -#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ -#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ -#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ -#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ -#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ -#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ -#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ -#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ -#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ -#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ -#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ - -#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ -#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ -#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ - -#endif - diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h deleted file mode 100644 index 1014e9bf181..00000000000 --- a/include/asm-arm/arch-at91/at91_wdt.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_wdt.h - * - * Watchdog Timer (WDT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_WDT_H -#define AT91_WDT_H - -#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ -#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ -#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ -#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ -#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ -#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ -#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ -#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ -#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ -#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ -#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ - -#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ -#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ -#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ - -#endif diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h deleted file mode 100644 index 6f14d9053ac..00000000000 --- a/include/asm-arm/arch-at91/at91cap9.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91cap9.h - * - * Copyright (C) 2007 Stelian Pop - * Copyright (C) 2007 Lead Tech Design - * Copyright (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8 /* USART 0 */ -#define AT91CAP9_ID_US1 9 /* USART 1 */ -#define AT91CAP9_ID_US2 10 /* USART 2 */ -#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13 /* CAN */ -#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91CAP9_BASE_UDPHS 0xfff78000 -#define AT91CAP9_BASE_TCB0 0xfff7c000 -#define AT91CAP9_BASE_TC0 0xfff7c000 -#define AT91CAP9_BASE_TC1 0xfff7c040 -#define AT91CAP9_BASE_TC2 0xfff7c080 -#define AT91CAP9_BASE_MCI0 0xfff80000 -#define AT91CAP9_BASE_MCI1 0xfff84000 -#define AT91CAP9_BASE_TWI 0xfff88000 -#define AT91CAP9_BASE_US0 0xfff8c000 -#define AT91CAP9_BASE_US1 0xfff90000 -#define AT91CAP9_BASE_US2 0xfff94000 -#define AT91CAP9_BASE_SSC0 0xfff98000 -#define AT91CAP9_BASE_SSC1 0xfff9c000 -#define AT91CAP9_BASE_AC97C 0xfffa0000 -#define AT91CAP9_BASE_SPI0 0xfffa4000 -#define AT91CAP9_BASE_SPI1 0xfffa8000 -#define AT91CAP9_BASE_CAN 0xfffac000 -#define AT91CAP9_BASE_PWMC 0xfffb8000 -#define AT91CAP9_BASE_EMAC 0xfffbc000 -#define AT91CAP9_BASE_ADC 0xfffc0000 -#define AT91CAP9_BASE_ISI 0xfffc4000 -#define AT91_BASE_SYS 0xffffe200 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) -#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) -#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) -#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) -#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91_USART0 AT91CAP9_BASE_US0 -#define AT91_USART1 AT91CAP9_BASE_US1 -#define AT91_USART2 AT91CAP9_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ - -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - -#endif diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h deleted file mode 100644 index efdb23af1ee..00000000000 --- a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91cap9_ddrsdr.h - * - * DDR/SDR Controller (DDRSDRC) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_DDRSDR_H -#define AT91CAP9_DDRSDR_H - -#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ -#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ - -#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_DDR 2 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 - -#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h deleted file mode 100644 index ddbd4873c84..00000000000 --- a/include/asm-arm/arch-at91/at91cap9_matrix.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91cap9_matrix.h - * - * Copyright (C) 2007 Stelian Pop - * Copyright (C) 2007 Lead Tech Design - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ -#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ -#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ -#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h deleted file mode 100644 index e8fc0b1c33f..00000000000 --- a/include/asm-arm/arch-at91/at91rm9200.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91rm9200.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_H -#define AT91RM9200_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ -#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91RM9200_ID_US0 6 /* USART 0 */ -#define AT91RM9200_ID_US1 7 /* USART 1 */ -#define AT91RM9200_ID_US2 8 /* USART 2 */ -#define AT91RM9200_ID_US3 9 /* USART 3 */ -#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91RM9200_ID_UDP 11 /* USB Device Port */ -#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ -#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ -#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ -#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ -#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ -#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ -#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ -#define AT91RM9200_ID_UHP 23 /* USB Host port */ -#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ -#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ -#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ -#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ -#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ -#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ - - -/* - * Peripheral physical base addresses. - */ -#define AT91RM9200_BASE_TCB0 0xfffa0000 -#define AT91RM9200_BASE_TC0 0xfffa0000 -#define AT91RM9200_BASE_TC1 0xfffa0040 -#define AT91RM9200_BASE_TC2 0xfffa0080 -#define AT91RM9200_BASE_TCB1 0xfffa4000 -#define AT91RM9200_BASE_TC3 0xfffa4000 -#define AT91RM9200_BASE_TC4 0xfffa4040 -#define AT91RM9200_BASE_TC5 0xfffa4080 -#define AT91RM9200_BASE_UDP 0xfffb0000 -#define AT91RM9200_BASE_MCI 0xfffb4000 -#define AT91RM9200_BASE_TWI 0xfffb8000 -#define AT91RM9200_BASE_EMAC 0xfffbc000 -#define AT91RM9200_BASE_US0 0xfffc0000 -#define AT91RM9200_BASE_US1 0xfffc4000 -#define AT91RM9200_BASE_US2 0xfffc8000 -#define AT91RM9200_BASE_US3 0xfffcc000 -#define AT91RM9200_BASE_SSC0 0xfffd0000 -#define AT91RM9200_BASE_SSC1 0xfffd4000 -#define AT91RM9200_BASE_SSC2 0xfffd8000 -#define AT91RM9200_BASE_SPI 0xfffe0000 -#define AT91_BASE_SYS 0xfffff000 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */ -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */ -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */ -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */ -#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */ -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */ -#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */ -#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */ -#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ - -#define AT91_USART0 AT91RM9200_BASE_US0 -#define AT91_USART1 AT91RM9200_BASE_US1 -#define AT91_USART2 AT91RM9200_BASE_US2 -#define AT91_USART3 AT91RM9200_BASE_US3 - -#define AT91_MATRIX 0 /* not supported */ - -/* - * Internal Memory. - */ -#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ -#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h deleted file mode 100644 index 0c417af5fe7..00000000000 --- a/include/asm-arm/arch-at91/at91rm9200_emac.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91rm9200_emac.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Ethernet MAC registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_EMAC_H -#define AT91RM9200_EMAC_H - -#define AT91_EMAC_CTL 0x00 /* Control Register */ -#define AT91_EMAC_LB (1 << 0) /* Loopback */ -#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */ -#define AT91_EMAC_RE (1 << 2) /* Receive Enable */ -#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */ -#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */ -#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */ -#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */ -#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */ -#define AT91_EMAC_BP (1 << 8) /* Back Pressure */ - -#define AT91_EMAC_CFG 0x04 /* Configuration Register */ -#define AT91_EMAC_SPD (1 << 0) /* Speed */ -#define AT91_EMAC_FD (1 << 1) /* Full Duplex */ -#define AT91_EMAC_BR (1 << 2) /* Bit Rate */ -#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */ -#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */ -#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */ -#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */ -#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */ -#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */ -#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */ -#define AT91_EMAC_CLK_DIV8 (0 << 10) -#define AT91_EMAC_CLK_DIV16 (1 << 10) -#define AT91_EMAC_CLK_DIV32 (2 << 10) -#define AT91_EMAC_CLK_DIV64 (3 << 10) -#define AT91_EMAC_RTY (1 << 12) /* Retry Test */ -#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */ - -#define AT91_EMAC_SR 0x08 /* Status Register */ -#define AT91_EMAC_SR_LINK (1 << 0) /* Link */ -#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */ -#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */ - -#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */ - -#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */ -#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */ -#define AT91_EMAC_NCRC (1 << 15) /* No CRC */ - -#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */ -#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */ -#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */ -#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */ -#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */ -#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */ -#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */ -#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */ - -#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */ - -#define AT91_EMAC_RSR 0x20 /* Receive Status Register */ -#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */ -#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */ -#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */ - -#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */ -#define AT91_EMAC_DONE (1 << 0) /* Management Done */ -#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */ -#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */ -#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */ -#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */ -#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */ -#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */ -#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */ -#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */ -#define AT91_EMAC_LINK (1 << 9) /* Link */ -#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */ -#define AT91_EMAC_ABT (1 << 11) /* Abort */ - -#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */ -#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */ -#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */ - -#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */ -#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */ -#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */ -#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */ -#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */ -#define AT91_EMAC_RW_W (1 << 28) -#define AT91_EMAC_RW_R (2 << 28) -#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */ - -/* - * Statistics Registers. - */ -#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */ -#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */ -#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */ -#define AT91_EMAC_OK 0x4c /* Frames Received OK */ -#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */ -#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */ -#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */ -#define AT91_EMAC_LCOL 0x5c /* Late Collision */ -#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */ -#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */ -#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */ -#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */ -#define AT91_EMAC_ROV 0x70 /* Receive Overrun */ -#define AT91_EMAC_CDE 0x74 /* Code Error */ -#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */ -#define AT91_EMAC_RJB 0x7c /* Receive Jabber */ -#define AT91_EMAC_USF 0x80 /* Undersize Frame */ -#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */ - -/* - * Address Registers. - */ -#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */ -#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */ -#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */ -#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */ -#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */ -#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */ -#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */ -#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */ -#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */ -#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */ - -#endif diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h deleted file mode 100644 index 24d012939cc..00000000000 --- a/include/asm-arm/arch-at91/at91rm9200_mc.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91rm9200_mc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_MC_H -#define AT91RM9200_MC_H - -/* Memory Controller */ -#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ -#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ - -#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ -#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ -#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ -#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ -#define AT91_MC_ABTSZ_BYTE (0 << 8) -#define AT91_MC_ABTSZ_HALFWORD (1 << 8) -#define AT91_MC_ABTSZ_WORD (2 << 8) -#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */ -#define AT91_MC_ABTTYP_DATAREAD (0 << 10) -#define AT91_MC_ABTTYP_DATAWRITE (1 << 10) -#define AT91_MC_ABTTYP_FETCH (2 << 10) -#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */ -#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */ -#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */ -#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */ -#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */ -#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */ -#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ -#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ - -#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ - -#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ -#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ -#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ -#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ -#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ - -/* External Bus Interface (EBI) registers */ -#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ -#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ -#define AT91_EBI_CS0A_SMC (0 << 0) -#define AT91_EBI_CS0A_BFC (1 << 0) -#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_EBI_CS1A_SMC (0 << 1) -#define AT91_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */ -#define AT91_EBI_CS3A_SMC (0 << 3) -#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */ -#define AT91_EBI_CS4A_SMC (0 << 4) -#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4) -#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */ -#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ - -/* Static Memory Controller (SMC) registers */ -#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ -#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ -#define AT91_SMC_NWS_(x) ((x) << 0) -#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ -#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */ -#define AT91_SMC_TDF_(x) ((x) << 8) -#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */ -#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */ -#define AT91_SMC_DBW_16 (1 << 13) -#define AT91_SMC_DBW_8 (2 << 13) -#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */ -#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */ -#define AT91_SMC_ACSS_STD (0 << 16) -#define AT91_SMC_ACSS_1 (1 << 16) -#define AT91_SMC_ACSS_2 (2 << 16) -#define AT91_SMC_ACSS_3 (3 << 16) -#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */ -#define AT91_SMC_RWSETUP_(x) ((x) << 24) -#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ -#define AT91_SMC_RWHOLD_(x) ((x) << 28) - -/* SDRAM Controller registers */ -#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91_SDRAMC_MODE_NOP (1 << 0) -#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91_SDRAMC_MODE_LMR (3 << 0) -#define AT91_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 4) -#define AT91_SDRAMC_DBW_16 (1 << 4) - -#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */ -#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */ -#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */ - -/* Burst Flash Controller register */ -#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */ -#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ -#define AT91_BFC_BFCOM_DISABLED (0 << 0) -#define AT91_BFC_BFCOM_ASYNC (1 << 0) -#define AT91_BFC_BFCOM_BURST (2 << 0) -#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */ -#define AT91_BFC_BFCC_MCK (1 << 2) -#define AT91_BFC_BFCC_DIV2 (2 << 2) -#define AT91_BFC_BFCC_DIV4 (3 << 2) -#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */ -#define AT91_BFC_PAGES (7 << 8) /* Page Size */ -#define AT91_BFC_PAGES_NO_PAGE (0 << 8) -#define AT91_BFC_PAGES_16 (1 << 8) -#define AT91_BFC_PAGES_32 (2 << 8) -#define AT91_BFC_PAGES_64 (3 << 8) -#define AT91_BFC_PAGES_128 (4 << 8) -#define AT91_BFC_PAGES_256 (5 << 8) -#define AT91_BFC_PAGES_512 (6 << 8) -#define AT91_BFC_PAGES_1024 (7 << 8) -#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */ -#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */ -#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */ -#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */ -#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h deleted file mode 100644 index 889872a3f2a..00000000000 --- a/include/asm-arm/arch-at91/at91sam9260.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9260.h - * - * (C) 2006 Andrew Victor - * - * Common definitions. - * Based on AT91SAM9260 datasheet revision A (Preliminary). - * - * Includes also definitions for AT91SAM9XE and AT91SAM9G families - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_H -#define AT91SAM9260_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ -#define AT91SAM9260_ID_US0 6 /* USART 0 */ -#define AT91SAM9260_ID_US1 7 /* USART 1 */ -#define AT91SAM9260_ID_US2 8 /* USART 2 */ -#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ -#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9260_ID_UHP 20 /* USB Host port */ -#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ -#define AT91SAM9260_ID_US3 23 /* USART 3 */ -#define AT91SAM9260_ID_US4 24 /* USART 4 */ -#define AT91SAM9260_ID_US5 25 /* USART 5 */ -#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ -#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ -#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ -#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9260_BASE_TCB0 0xfffa0000 -#define AT91SAM9260_BASE_TC0 0xfffa0000 -#define AT91SAM9260_BASE_TC1 0xfffa0040 -#define AT91SAM9260_BASE_TC2 0xfffa0080 -#define AT91SAM9260_BASE_UDP 0xfffa4000 -#define AT91SAM9260_BASE_MCI 0xfffa8000 -#define AT91SAM9260_BASE_TWI 0xfffac000 -#define AT91SAM9260_BASE_US0 0xfffb0000 -#define AT91SAM9260_BASE_US1 0xfffb4000 -#define AT91SAM9260_BASE_US2 0xfffb8000 -#define AT91SAM9260_BASE_SSC 0xfffbc000 -#define AT91SAM9260_BASE_ISI 0xfffc0000 -#define AT91SAM9260_BASE_EMAC 0xfffc4000 -#define AT91SAM9260_BASE_SPI0 0xfffc8000 -#define AT91SAM9260_BASE_SPI1 0xfffcc000 -#define AT91SAM9260_BASE_US3 0xfffd0000 -#define AT91SAM9260_BASE_US4 0xfffd4000 -#define AT91SAM9260_BASE_US5 0xfffd8000 -#define AT91SAM9260_BASE_TCB1 0xfffdc000 -#define AT91SAM9260_BASE_TC3 0xfffdc000 -#define AT91SAM9260_BASE_TC4 0xfffdc040 -#define AT91SAM9260_BASE_TC5 0xfffdc080 -#define AT91SAM9260_BASE_ADC 0xfffe0000 -#define AT91_BASE_SYS 0xffffe800 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9260_BASE_US0 -#define AT91_USART1 AT91SAM9260_BASE_US1 -#define AT91_USART2 AT91SAM9260_BASE_US2 -#define AT91_USART3 AT91SAM9260_BASE_US3 -#define AT91_USART4 AT91SAM9260_BASE_US4 -#define AT91_USART5 AT91SAM9260_BASE_US5 - - -/* - * Internal Memory. - */ -#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ -#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ - -#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ - -#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ -#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ - -#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ -#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ - -#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h deleted file mode 100644 index a8e9fec6c73..00000000000 --- a/include/asm-arm/arch-at91/at91sam9260_matrix.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9260_matrix.h - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9260 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_MATRIX_H -#define AT91SAM9260_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h deleted file mode 100644 index c7c4778dac4..00000000000 --- a/include/asm-arm/arch-at91/at91sam9261.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9261.h - * - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91SAM9261 datasheet revision E. (Preliminary) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_H -#define AT91SAM9261_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9261_ID_US0 6 /* USART 0 */ -#define AT91SAM9261_ID_US1 7 /* USART 1 */ -#define AT91SAM9261_ID_US2 8 /* USART 2 */ -#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9261_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9261_ID_UHP 20 /* USB Host port */ -#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */ -#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9261_BASE_TCB0 0xfffa0000 -#define AT91SAM9261_BASE_TC0 0xfffa0000 -#define AT91SAM9261_BASE_TC1 0xfffa0040 -#define AT91SAM9261_BASE_TC2 0xfffa0080 -#define AT91SAM9261_BASE_UDP 0xfffa4000 -#define AT91SAM9261_BASE_MCI 0xfffa8000 -#define AT91SAM9261_BASE_TWI 0xfffac000 -#define AT91SAM9261_BASE_US0 0xfffb0000 -#define AT91SAM9261_BASE_US1 0xfffb4000 -#define AT91SAM9261_BASE_US2 0xfffb8000 -#define AT91SAM9261_BASE_SSC0 0xfffbc000 -#define AT91SAM9261_BASE_SSC1 0xfffc0000 -#define AT91SAM9261_BASE_SSC2 0xfffc4000 -#define AT91SAM9261_BASE_SPI0 0xfffc8000 -#define AT91SAM9261_BASE_SPI1 0xfffcc000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9261_BASE_US0 -#define AT91_USART1 AT91SAM9261_BASE_US1 -#define AT91_USART2 AT91SAM9261_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ - -#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */ -#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h deleted file mode 100644 index 6f072421be5..00000000000 --- a/include/asm-arm/arch-at91/at91sam9261_matrix.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9261_matrix.h - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_MATRIX_H -#define AT91SAM9261_MATRIX_H - -#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ -#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h deleted file mode 100644 index 018a647311d..00000000000 --- a/include/asm-arm/arch-at91/at91sam9263.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9263.h - * - * (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_H -#define AT91SAM9263_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ -#define AT91SAM9263_ID_US0 7 /* USART 0 */ -#define AT91SAM9263_ID_US1 8 /* USART 1 */ -#define AT91SAM9263_ID_US2 9 /* USART 2 */ -#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */ -#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */ -#define AT91SAM9263_ID_CAN 12 /* CAN */ -#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */ -#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */ -#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */ -#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */ -#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */ -#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */ -#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */ -#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */ -#define AT91SAM9263_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */ -#define AT91SAM9263_ID_UDP 24 /* USB Device Port */ -#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */ -#define AT91SAM9263_ID_DMA 27 /* DMA Controller */ -#define AT91SAM9263_ID_UHP 29 /* USB Host port */ -#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9263_BASE_UDP 0xfff78000 -#define AT91SAM9263_BASE_TCB0 0xfff7c000 -#define AT91SAM9263_BASE_TC0 0xfff7c000 -#define AT91SAM9263_BASE_TC1 0xfff7c040 -#define AT91SAM9263_BASE_TC2 0xfff7c080 -#define AT91SAM9263_BASE_MCI0 0xfff80000 -#define AT91SAM9263_BASE_MCI1 0xfff84000 -#define AT91SAM9263_BASE_TWI 0xfff88000 -#define AT91SAM9263_BASE_US0 0xfff8c000 -#define AT91SAM9263_BASE_US1 0xfff90000 -#define AT91SAM9263_BASE_US2 0xfff94000 -#define AT91SAM9263_BASE_SSC0 0xfff98000 -#define AT91SAM9263_BASE_SSC1 0xfff9c000 -#define AT91SAM9263_BASE_AC97C 0xfffa0000 -#define AT91SAM9263_BASE_SPI0 0xfffa4000 -#define AT91SAM9263_BASE_SPI1 0xfffa8000 -#define AT91SAM9263_BASE_CAN 0xfffac000 -#define AT91SAM9263_BASE_PWMC 0xfffb8000 -#define AT91SAM9263_BASE_EMAC 0xfffbc000 -#define AT91SAM9263_BASE_ISI 0xfffc4000 -#define AT91SAM9263_BASE_2DGE 0xfffc8000 -#define AT91_BASE_SYS 0xffffe000 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS) -#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) -#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS) -#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS) -#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) -#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS) -#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) -#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9263_BASE_US0 -#define AT91_USART1 AT91SAM9263_BASE_US1 -#define AT91_USART2 AT91SAM9263_BASE_US2 - -#define AT91_SMC AT91_SMC0 - -/* - * Internal Memory. - */ -#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */ -#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */ - -#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */ -#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ - -#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */ -#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ -#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h deleted file mode 100644 index 72f6e668e41..00000000000 --- a/include/asm-arm/arch-at91/at91sam9263_matrix.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9263_matrix.h - * - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_MATRIX_H -#define AT91SAM9263_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) - -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) -#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h deleted file mode 100644 index d3b8b3da6b4..00000000000 --- a/include/asm-arm/arch-at91/at91sam9_sdramc.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9_sdramc.h - * - * SDRAM Controllers (SDRAMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9_SDRAMC_H -#define AT91SAM9_SDRAMC_H - -/* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL 0 -#define AT91_SDRAMC_MODE_NOP 1 -#define AT91_SDRAMC_MODE_PRECHARGE 2 -#define AT91_SDRAMC_MODE_LMR 3 -#define AT91_SDRAMC_MODE_REFRESH 4 -#define AT91_SDRAMC_MODE_EXT_LMR 5 -#define AT91_SDRAMC_MODE_DEEP 6 - -#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_1 (1 << 5) -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_CAS_3 (3 << 5) -#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 7) -#define AT91_SDRAMC_DBW_16 (1 << 7) -#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ -#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_SDRAMC_LPCB_DISABLE 0 -#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 -#define AT91_SDRAMC_LPCB_POWER_DOWN 2 -#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ -#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ -#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ - -#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ -#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ -#define AT91_SDRAMC_MD_SDRAM 0 -#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 - - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h deleted file mode 100644 index 9e49eed31e5..00000000000 --- a/include/asm-arm/arch-at91/at91sam9_smc.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9_smc.h - * - * Static Memory Controllers (SMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9_SMC_H -#define AT91SAM9_SMC_H - -#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -#define AT91_SMC_NWESETUP_(x) ((x) << 0) -#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) - -#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) - -#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) - -#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -#define AT91_SMC_EXNWMODE_READY (3 << 4) -#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -#define AT91_SMC_BAT_SELECT (0 << 8) -#define AT91_SMC_BAT_WRITE (1 << 8) -#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -#define AT91_SMC_DBW_8 (0 << 12) -#define AT91_SMC_DBW_16 (1 << 12) -#define AT91_SMC_DBW_32 (2 << 12) -#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -#define AT91_SMC_TDF_(x) ((x) << 16) -#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -#define AT91_SMC_PS (3 << 28) /* Page Size */ -#define AT91_SMC_PS_4 (0 << 28) -#define AT91_SMC_PS_8 (1 << 28) -#define AT91_SMC_PS_16 (2 << 28) -#define AT91_SMC_PS_32 (3 << 28) - -#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#endif - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h deleted file mode 100644 index 622e56f81d4..00000000000 --- a/include/asm-arm/arch-at91/at91sam9rl.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9260.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Common definitions. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_H -#define AT91SAM9RL_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ -#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91SAM9RL_ID_US0 6 /* USART 0 */ -#define AT91SAM9RL_ID_US1 7 /* USART 1 */ -#define AT91SAM9RL_ID_US2 8 /* USART 2 */ -#define AT91SAM9RL_ID_US3 9 /* USART 3 */ -#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */ -#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */ -#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */ -#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */ -#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */ -#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */ -#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */ -#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */ -#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */ -#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */ -#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ -#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9RL_BASE_TCB0 0xfffa0000 -#define AT91SAM9RL_BASE_TC0 0xfffa0000 -#define AT91SAM9RL_BASE_TC1 0xfffa0040 -#define AT91SAM9RL_BASE_TC2 0xfffa0080 -#define AT91SAM9RL_BASE_MCI 0xfffa4000 -#define AT91SAM9RL_BASE_TWI0 0xfffa8000 -#define AT91SAM9RL_BASE_TWI1 0xfffac000 -#define AT91SAM9RL_BASE_US0 0xfffb0000 -#define AT91SAM9RL_BASE_US1 0xfffb4000 -#define AT91SAM9RL_BASE_US2 0xfffb8000 -#define AT91SAM9RL_BASE_US3 0xfffbc000 -#define AT91SAM9RL_BASE_SSC0 0xfffc0000 -#define AT91SAM9RL_BASE_SSC1 0xfffc4000 -#define AT91SAM9RL_BASE_PWMC 0xfffc8000 -#define AT91SAM9RL_BASE_SPI 0xfffcc000 -#define AT91SAM9RL_BASE_TSC 0xfffd0000 -#define AT91SAM9RL_BASE_UDPHS 0xfffd4000 -#define AT91SAM9RL_BASE_AC97C 0xfffd8000 -#define AT91_BASE_SYS 0xffffc000 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_DMA (0xffffe600 - AT91_BASE_SYS) -#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) -#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9RL_BASE_US0 -#define AT91_USART1 AT91SAM9RL_BASE_US1 -#define AT91_USART2 AT91SAM9RL_BASE_US2 -#define AT91_USART3 AT91SAM9RL_BASE_US3 - - -/* - * Internal Memory. - */ -#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ - -#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h deleted file mode 100644 index 84224174e6a..00000000000 --- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9rl_matrix.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_MATRIX_H -#define AT91SAM9RL_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) - -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - - -#endif diff --git a/include/asm-arm/arch-at91/at91x40.h b/include/asm-arm/arch-at91/at91x40.h deleted file mode 100644 index 612203e0177..00000000000 --- a/include/asm-arm/arch-at91/at91x40.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91x40.h - * - * (C) Copyright 2007, Greg Ungerer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91X40_H -#define AT91X40_H - -/* - * IRQ list. - */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ -#define AT91X40_ID_USART0 2 /* USART port 0 */ -#define AT91X40_ID_USART1 3 /* USART port 1 */ -#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ -#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/ -#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/ -#define AT91X40_ID_WD 7 /* Watchdog? */ -#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */ - -#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */ -#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */ -#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */ - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_BASE_SYS 0xffc00000 - -#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */ -#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */ -#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */ -#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */ -#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */ -#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */ -#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */ -#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */ -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ - -/* - * The AT91x40 series doesn't have a debug unit like the other AT91 parts. - * But it does have a chip identify register and extension ID, so define at - * least these here. - */ -#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */ -#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */ - -#endif /* AT91X40_H */ diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h deleted file mode 100644 index 48bbd854f57..00000000000 --- a/include/asm-arm/arch-at91/board.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * include/asm-arm/arch-at91/board.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * These are data structures found in platform_device.dev.platform_data, - * and describing board-specific data needed by drivers. For example, - * which pin is used for a given GPIO role. - * - * In 2.6, drivers should strongly avoid board-specific knowledge so - * that supporting new boards normally won't require driver patches. - * Most board-specific knowledge should be in arch/.../board-*.c files. - */ - -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include -#include -#include -#include -#include -#include - - /* USB Device */ -struct at91_udc_data { - u8 vbus_pin; /* high == host powering us */ - u8 pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; -extern void __init at91_add_device_udc(struct at91_udc_data *data); - - /* USB High Speed Device */ -extern void __init at91_add_device_usba(struct usba_platform_data *data); - - /* Compact Flash */ -struct at91_cf_data { - u8 irq_pin; /* I/O IRQ */ - u8 det_pin; /* Card detect */ - u8 vcc_pin; /* power switching */ - u8 rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ -}; -extern void __init at91_add_device_cf(struct at91_cf_data *data); - - /* MMC / SD */ -struct at91_mmc_data { - u8 det_pin; /* card detect IRQ */ - unsigned slot_b:1; /* uses Slot B */ - unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - u8 wp_pin; /* (SD) writeprotect detect */ - u8 vcc_pin; /* power switching (high == on) */ -}; -extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - - /* Ethernet (EMAC & MACB) */ -struct at91_eth_data { - u32 phy_mask; - u8 phy_irq_pin; /* PHY IRQ */ - u8 is_rmii; /* using RMII interface? */ -}; -extern void __init at91_add_device_eth(struct at91_eth_data *data); - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) -#define eth_platform_data at91_eth_data -#endif - - /* USB Host */ -struct at91_usbh_data { - u8 ports; /* number of ports on root hub */ - u8 vbus_pin[]; /* port power-control pin */ -}; -extern void __init at91_add_device_usbh(struct at91_usbh_data *data); - - /* NAND / SmartMedia */ -struct atmel_nand_data { - u8 enable_pin; /* chip enable */ - u8 det_pin; /* card detect */ - u8 rdy_pin; /* ready/busy */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - struct mtd_partition* (*partition_info)(int, int*); -}; -extern void __init at91_add_device_nand(struct atmel_nand_data *data); - - /* I2C*/ -extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); - - /* SPI */ -extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); - - /* Serial */ -#define ATMEL_UART_CTS 0x01 -#define ATMEL_UART_RTS 0x02 -#define ATMEL_UART_DSR 0x04 -#define ATMEL_UART_DTR 0x08 -#define ATMEL_UART_DCD 0x10 -#define ATMEL_UART_RI 0x20 - -extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); -extern void __init at91_set_serial_console(unsigned portnr); - -struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ -}; -extern struct platform_device *atmel_default_console_device; -extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); - -struct atmel_uart_data { - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ -}; -extern void __init at91_add_device_serial(void); - -/* - * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC - * platform devices. Their SSC ID is part of their configuration data, - * along with information about which SSC signals they should use. - */ -#define ATMEL_SSC_TK 0x01 -#define ATMEL_SSC_TF 0x02 -#define ATMEL_SSC_TD 0x04 -#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) - -#define ATMEL_SSC_RK 0x10 -#define ATMEL_SSC_RF 0x20 -#define ATMEL_SSC_RD 0x40 -#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) - -extern void __init at91_add_device_ssc(unsigned id, unsigned pins); - - /* LCD Controller */ -struct atmel_lcdfb_info; -extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); - - /* AC97 */ -struct atmel_ac97_data { - u8 reset_pin; /* reset */ -}; -extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); - - /* ISI */ -extern void __init at91_add_device_isi(void); - - /* LEDs */ -extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); -extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); - -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - -#endif diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h deleted file mode 100644 index f24b55c9083..00000000000 --- a/include/asm-arm/arch-at91/cpu.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * include/asm-arm/arch-at91/cpu.h - * - * Copyright (C) 2006 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_CPU_H -#define __ASM_ARCH_CPU_H - -#include -#include - - -#define ARCH_ID_AT91RM9200 0x09290780 -#define ARCH_ID_AT91SAM9260 0x019803a0 -#define ARCH_ID_AT91SAM9261 0x019703a0 -#define ARCH_ID_AT91SAM9263 0x019607a0 -#define ARCH_ID_AT91SAM9G20 0x019905a0 -#define ARCH_ID_AT91SAM9RL64 0x019b03a0 -#define ARCH_ID_AT91CAP9 0x039A03A0 - -#define ARCH_ID_AT91SAM9XE128 0x329973a0 -#define ARCH_ID_AT91SAM9XE256 0x329a93a0 -#define ARCH_ID_AT91SAM9XE512 0x329aa3a0 - -#define ARCH_ID_AT91M40800 0x14080044 -#define ARCH_ID_AT91R40807 0x44080746 -#define ARCH_ID_AT91M40807 0x14080745 -#define ARCH_ID_AT91R40008 0x44000840 - -static inline unsigned long at91_cpu_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); -} - - -#define ARCH_FAMILY_AT91X92 0x09200000 -#define ARCH_FAMILY_AT91SAM9 0x01900000 -#define ARCH_FAMILY_AT91SAM9XE 0x02900000 - -static inline unsigned long at91_arch_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); -} - - -#ifdef CONFIG_ARCH_AT91RM9200 -#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) -#else -#define cpu_is_at91rm9200() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9260 -#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE) -#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe()) -#else -#define cpu_is_at91sam9xe() (0) -#define cpu_is_at91sam9260() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9G20 -#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20) -#else -#define cpu_is_at91sam9g20() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9261 -#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) -#else -#define cpu_is_at91sam9261() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9263 -#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) -#else -#define cpu_is_at91sam9263() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9RL -#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64) -#else -#define cpu_is_at91sam9rl() (0) -#endif - -#ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) -#else -#define cpu_is_at91cap9() (0) -#endif - -/* - * Since this is ARM, we will never run on any AVR32 CPU. But these - * definitions may reduce clutter in common drivers. - */ -#define cpu_is_at32ap7000() (0) - -#endif diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S deleted file mode 100644 index ff28696b6d9..00000000000 --- a/include/asm-arm/arch-at91/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-at91/debug-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) - .endm - - .macro senduart,rd,rx - strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete - beq 1001b - .endm - diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h deleted file mode 100644 index 774565412be..00000000000 --- a/include/asm-arm/arch-at91/dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-at91/dma.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S deleted file mode 100644 index cbaf6050154..00000000000 --- a/include/asm-arm/arch-at91/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-at91/entry-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Low-level IRQ helper macros for AT91RM9200 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now. - .endm - diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h deleted file mode 100644 index 0a241e2fb67..00000000000 --- a/include/asm-arm/arch-at91/gpio.h +++ /dev/null @@ -1,252 +0,0 @@ -/* - * include/asm-arm/arch-at91/gpio.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_AT91RM9200_GPIO_H -#define __ASM_ARCH_AT91RM9200_GPIO_H - -#include - -#define PIN_BASE NR_AIC_IRQS - -#define MAX_GPIO_BANKS 5 - -/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ - -#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) -#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) -#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) -#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) -#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) -#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) -#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) -#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) -#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) -#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) -#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) -#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) -#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) -#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) -#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) -#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) -#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) -#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) -#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) -#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) -#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) -#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) -#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) -#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) -#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) -#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) -#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) -#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) -#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) -#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) -#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) -#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) - -#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) -#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) -#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) -#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) -#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) -#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) -#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) -#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) -#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) -#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) -#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) -#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) -#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) -#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) -#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) -#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) -#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) -#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) -#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) -#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) -#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) -#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) -#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) -#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) -#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) -#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) -#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) -#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) -#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) -#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) -#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) -#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) - -#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) -#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) -#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) -#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) -#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) -#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) -#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) -#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) -#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) -#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) -#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) -#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) -#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) -#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) -#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) -#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) -#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) -#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) -#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) -#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) -#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) -#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) -#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) -#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) -#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) -#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) -#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) -#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) -#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) -#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) -#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) -#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) - -#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) -#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) -#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) -#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) -#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) -#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) -#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) -#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) -#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) -#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) -#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) -#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) -#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) -#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) -#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) -#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) -#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) -#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) -#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) -#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) -#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) -#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) -#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) -#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) -#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) -#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) -#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) -#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) -#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) -#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) -#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) -#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) - -#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) -#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) -#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) -#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) -#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) -#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) -#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) -#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) -#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) -#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) -#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) -#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) -#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) -#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) -#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) -#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) -#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) -#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) -#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) -#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) -#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) -#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) -#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) -#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) -#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) -#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) -#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) -#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) -#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) -#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) -#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) -#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) - -#ifndef __ASSEMBLY__ -/* setup setup routines, called from board init or driver probe() */ -extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); -extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); -extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); - -/* callable at any time */ -extern int at91_set_gpio_value(unsigned pin, int value); -extern int at91_get_gpio_value(unsigned pin); - -/* callable only from core power-management code */ -extern void at91_gpio_suspend(void); -extern void at91_gpio_resume(void); - -/*-------------------------------------------------------------------------*/ - -/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should - * eventually be removed (along with this errno.h inclusion), and the - * gpio request/free calls should probably be implemented. - */ - -#include - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ -} - -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - -static inline int gpio_get_value(unsigned gpio) -{ - return at91_get_gpio_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - at91_set_gpio_value(gpio, value); -} - -#include /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} - -#endif /* __ASSEMBLY__ */ - -#endif diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h deleted file mode 100644 index 016a3a3f663..00000000000 --- a/include/asm-arm/arch-at91/hardware.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * include/asm-arm/arch-at91/hardware.h - * - * Copyright (C) 2003 SAN People - * Copyright (C) 2003 ATMEL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -#if defined(CONFIG_ARCH_AT91RM9200) -#include -#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#include -#elif defined(CONFIG_ARCH_AT91SAM9261) -#include -#elif defined(CONFIG_ARCH_AT91SAM9263) -#include -#elif defined(CONFIG_ARCH_AT91SAM9RL) -#include -#elif defined(CONFIG_ARCH_AT91CAP9) -#include -#elif defined(CONFIG_ARCH_AT91X40) -#include -#else -#error "Unsupported AT91 processor" -#endif - - -#ifdef CONFIG_MMU -/* - * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF - * to 0xFEF78000 .. 0xFF000000. (544Kb) - */ -#define AT91_IO_PHYS_BASE 0xFFF78000 -#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) -#else -/* - * Identity mapping for the non MMU case. - */ -#define AT91_IO_PHYS_BASE AT91_BASE_SYS -#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE -#endif - -#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) - - /* Convert a physical IO address to virtual IO address */ -#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) - -/* - * Virtual to Physical Address mapping for IO devices. - */ -#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) - - /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_MAX SZ_1M -#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) - -/* Serial ports */ -#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ - -/* External Memory Map */ -#define AT91_CHIPSELECT_0 0x10000000 -#define AT91_CHIPSELECT_1 0x20000000 -#define AT91_CHIPSELECT_2 0x30000000 -#define AT91_CHIPSELECT_3 0x40000000 -#define AT91_CHIPSELECT_4 0x50000000 -#define AT91_CHIPSELECT_5 0x60000000 -#define AT91_CHIPSELECT_6 0x70000000 -#define AT91_CHIPSELECT_7 0x80000000 - -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - -/* Clocks */ -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - - -#endif diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h deleted file mode 100644 index f8beaa22846..00000000000 --- a/include/asm-arm/arch-at91/io.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-at91/io.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xFFFFFFFF - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - - -#ifndef __ASSEMBLY__ - -static inline unsigned int at91_sys_read(unsigned int reg_offset) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - return __raw_readl(addr + reg_offset); -} - -static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - __raw_writel(value, addr + reg_offset); -} - -#endif - -#endif diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h deleted file mode 100644 index 70b1216dce5..00000000000 --- a/include/asm-arm/arch-at91/irqs.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-at91/irqs.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include -#include - -#define NR_AIC_IRQS 32 - - -/* - * Acknowledge interrupt with AIC after interrupt has been handled. - * (by kernel/irq.c) - */ -#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0) - - -/* - * IRQ interrupt symbols are the AT91xxx_ID_* symbols - * for IRQs handled directly through the AIC, or else the AT91_PIN_* - * symbols in gpio.h for ones handled indirectly as GPIOs. - * We make provision for 5 banks of GPIO. - */ -#define NR_IRQS (NR_AIC_IRQS + (5 * 32)) - -/* FIQ is AIC source 0. */ -#define FIQ_START AT91_ID_FIQ - -#endif diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h deleted file mode 100644 index 904fbd60f0e..00000000000 --- a/include/asm-arm/arch-at91/memory.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-at91/memory.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -#define PHYS_OFFSET (AT91_SDRAM_BASE) - - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h deleted file mode 100644 index c5e3d035726..00000000000 --- a/include/asm-arm/arch-at91/system.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-at91/system.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ -// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - - /* - * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Unlike disabling the processor clock via the PMC (above) - * this allows the processor to be woken via JTAG. - */ - cpu_do_idle(); -} - -void (*at91_arch_reset)(void); - -static inline void arch_reset(char mode) -{ - /* call the CPU-specific reset function */ - if (at91_arch_reset) - (at91_arch_reset)(); -} - -#endif diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h deleted file mode 100644 index 67c86a89828..00000000000 --- a/include/asm-arm/arch-at91/timex.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * include/asm-arm/arch-at91/timex.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include - -#if defined(CONFIG_ARCH_AT91RM9200) - -#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) - -#elif defined(CONFIG_ARCH_AT91SAM9260) - -#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260) -#define AT91SAM9_MASTER_CLOCK 90000000 -#else -#define AT91SAM9_MASTER_CLOCK 99300000 -#endif - -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9261) - -#define AT91SAM9_MASTER_CLOCK 99300000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9263) - -#if defined(CONFIG_MACH_USB_A9263) -#define AT91SAM9_MASTER_CLOCK 90000000 -#else -#define AT91SAM9_MASTER_CLOCK 99959500 -#endif - -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9RL) - -#define AT91SAM9_MASTER_CLOCK 100000000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9G20) - -#define AT91SAM9_MASTER_CLOCK 132096000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91CAP9) - -#define AT91CAP9_MASTER_CLOCK 100000000 -#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91X40) - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) - -#endif - -#endif diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h deleted file mode 100644 index f5636a8f613..00000000000 --- a/include/asm-arm/arch-at91/uncompress.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-arm/arch-at91/uncompress.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -#if defined(CONFIG_AT91_EARLY_DBGU) -#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS) -#elif defined(CONFIG_AT91_EARLY_USART0) -#define UART_OFFSET AT91_USART0 -#elif defined(CONFIG_AT91_EARLY_USART1) -#define UART_OFFSET AT91_USART1 -#elif defined(CONFIG_AT91_EARLY_USART2) -#define UART_OFFSET AT91_USART2 -#elif defined(CONFIG_AT91_EARLY_USART3) -#define UART_OFFSET AT91_USART3 -#elif defined(CONFIG_AT91_EARLY_USART4) -#define UART_OFFSET AT91_USART4 -#elif defined(CONFIG_AT91_EARLY_USART5) -#define UART_OFFSET AT91_USART5 -#endif - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ -#ifdef UART_OFFSET - void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ - - while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY)) - barrier(); - __raw_writel(c, sys + ATMEL_US_THR); -#endif -} - -static inline void flush(void) -{ -#ifdef UART_OFFSET - void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ - - /* wait for transmission to complete */ - while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) - barrier(); -#endif -} - -#define arch_decomp_setup() - -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h deleted file mode 100644 index bb05e70e932..00000000000 --- a/include/asm-arm/arch-at91/vmalloc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-at91/vmalloc.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) - -#endif diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/include/asm-arm/arch-cl7500/acornfb.h deleted file mode 100644 index aea6330c974..00000000000 --- a/include/asm-arm/arch-cl7500/acornfb.h +++ /dev/null @@ -1,33 +0,0 @@ -#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119) - -static inline void -acornfb_vidc20_find_rates(struct vidc_timing *vidc, - struct fb_var_screeninfo *var) -{ - u_int bandwidth; - - vidc->control |= VIDC20_CTRL_PIX_CK; - - /* Calculate bandwidth */ - bandwidth = var->pixclock * 8 / var->bits_per_pixel; - - /* Encode bandwidth as VIDC20 setting */ - if (bandwidth > 16667*2) - vidc->control |= VIDC20_CTRL_FIFO_16; - else if (bandwidth > 13333*2) - vidc->control |= VIDC20_CTRL_FIFO_20; - else if (bandwidth > 11111*2) - vidc->control |= VIDC20_CTRL_FIFO_24; - else - vidc->control |= VIDC20_CTRL_FIFO_28; - - vidc->pll_ctl = 0x2020; -} - -#ifdef CONFIG_CHRONTEL_7003 -#define acornfb_default_control() VIDC20_CTRL_PIX_HCLK -#else -#define acornfb_default_control() VIDC20_CTRL_PIX_VCLK -#endif - -#define acornfb_default_econtrol() VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S deleted file mode 100644 index 9a2b67d2409..00000000000 --- a/include/asm-arm/arch-cl7500/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-cl7500/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mov \rx, #0xe0000000 - orr \rx, \rx, #0x00010000 - orr \rx, \rx, #0x00000be0 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h deleted file mode 100644 index 591ed255189..00000000000 --- a/include/asm-arm/arch-cl7500/dma.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/dma.h - * - * Copyright (C) 1999 Nexus Electronics Ltd. - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* DMA is not yet implemented! It should be the same as acorn, copy over.. */ - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 - -#define DMA_S0 0 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S deleted file mode 100644 index 5bd55557ccc..00000000000 --- a/include/asm-arm/arch-cl7500/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -#include -#include - - .equ ioc_base_high, IOC_BASE & 0xff000000 - .equ ioc_base_low, IOC_BASE & 0x00ff0000 - - .macro get_irqnr_preamble, base, tmp - mov \base, #ioc_base_high @ point at IOC - .if ioc_base_low - orr \base, \base, #ioc_base_low - .endif - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - diff --git a/include/asm-arm/arch-cl7500/hardware.h b/include/asm-arm/arch-cl7500/hardware.h deleted file mode 100644 index 1adfd18e615..00000000000 --- a/include/asm-arm/arch-cl7500/hardware.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/hardware.h - * - * Copyright (C) 1996-1999 Russell King. - * Copyright (C) 1999 Nexus Electronics Ltd. - * - * This file contains the hardware definitions of the - * CL7500 evaluation board. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -#ifdef __ASSEMBLY__ -#define IOMEM(x) x -#else -#define IOMEM(x) ((void __iomem *)(x)) -#endif - -/* - * What hardware must be present - */ -#define HAS_IOMD -#define HAS_VIDC20 - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ - -#define IO_START 0x03000000 /* I/O */ -#define IO_SIZE 0x01000000 -#define IO_BASE IOMEM(0xe0000000) - -#define ISA_START 0x0c000000 /* ISA */ -#define ISA_SIZE 0x00010000 -#define ISA_BASE 0xe1000000 - -#define FLASH_START 0x01000000 /* XXX */ -#define FLASH_SIZE 0x01000000 -#define FLASH_BASE 0xe2000000 - -#define LED_START 0x0302B000 -#define LED_SIZE 0x00001000 -#define LED_BASE 0xe3000000 -#define LED_ADDRESS (LED_BASE + 0xa00) - -/* Let's define SCREEN_START for CL7500, even though it's a lie. */ -#define SCREEN_START 0x02000000 /* VRAM */ -#define SCREEN_END 0xdfc00000 -#define SCREEN_BASE 0xdf800000 - -#define VIDC_BASE (void __iomem *)0xe0400000 -#define IOMD_BASE IOMEM(0xe0200000) -#define IOC_BASE IOMEM(0xe0200000) -#define FLOPPYDMA_BASE IOMEM(0xe002a000) -#define PCIO_BASE IOMEM(0xe0010000) - -#define vidc_writel(val) __raw_writel(val, VIDC_BASE) - -/* in/out bias for the ISA slot region */ -#define ISASLOT_IO 0x80400000 - -#endif diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h deleted file mode 100644 index 80f9b19cac9..00000000000 --- a/include/asm-arm/arch-cl7500/io.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/io.h - * from linux/include/asm-arm/arch-rpc/io.h - * - * Copyright (C) 1997 Russell King - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * GCC is totally crap at loading/storing data. We try to persuade it - * to do the right thing by using these whereever possible instead of - * the above. - */ -#define __arch_base_getb(b,o) \ - ({ \ - unsigned int v, r = (b); \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2]" \ - : "=r" (v) \ - : "r" (r), "Ir" (o)); \ - v; \ - }) - -#define __arch_base_getl(b,o) \ - ({ \ - unsigned int v, r = (b); \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2]" \ - : "=r" (v) \ - : "r" (r), "Ir" (o)); \ - v; \ - }) - -#define __arch_base_putb(v,b,o) \ - ({ \ - unsigned int r = (b); \ - __asm__ __volatile__( \ - "strb %0, [%1, %2]" \ - : \ - : "r" (v), "r" (r), "Ir" (o)); \ - }) - -#define __arch_base_putl(v,b,o) \ - ({ \ - unsigned int r = (b); \ - __asm__ __volatile__( \ - "str %0, [%1, %2]" \ - : \ - : "r" (v), "r" (r), "Ir" (o)); \ - }) - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. Note that all addresses are - * shifted left! - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -/* - * Dynamic IO functions - let the compiler - * optimize the expressions - */ -static inline void __outb (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "strb %1, [%0, %2, lsl #2] @ outb" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outw (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outw" - : "=&r" (temp) - : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outl (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outl" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline unsigned int __ioaddr (unsigned int port) \ -{ \ - if (__PORT_PCIO(port)) \ - return (unsigned int)(PCIO_BASE + (port << 2)); \ - else \ - return (unsigned int)(IO_BASE + (port << 2)); \ -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __ioaddrc(port) \ - (__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2)) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) -#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) __ioaddr((port)) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) - -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - -#endif diff --git a/include/asm-arm/arch-cl7500/irq.h b/include/asm-arm/arch-cl7500/irq.h deleted file mode 100644 index 4b286331f3f..00000000000 --- a/include/asm-arm/arch-cl7500/irq.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-cl7500/irq.h - * - * Copyright (C) 1996 Russell King - * Copyright (C) 1999, 2001 Nexus Electronics Ltd. - * - * Changelog: - * 10-10-1996 RMK Brought up to date with arch-sa110eval - * 22-08-1998 RMK Restructured IRQ routines - * 11-08-1999 PJB Created ARM7500 version, derived from RiscPC code - */ - -#include -#include - -static inline int fixup_irq(unsigned int irq) -{ - if (irq == IRQ_ISA) { - int isabits = *((volatile unsigned int *)0xe002b700); - if (isabits == 0) { - printk("Spurious ISA IRQ!\n"); - return irq; - } - irq = IRQ_ISA_BASE; - while (!(isabits & 1)) { - irq++; - isabits >>= 1; - } - } - - return irq; -} diff --git a/include/asm-arm/arch-cl7500/irqs.h b/include/asm-arm/arch-cl7500/irqs.h deleted file mode 100644 index f20996eadf1..00000000000 --- a/include/asm-arm/arch-cl7500/irqs.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/irqs.h - * - * Copyright (C) 1999 Nexus Electronics Ltd - */ - -#define IRQ_INT2 0 -#define IRQ_INT1 2 -#define IRQ_VSYNCPULSE 3 -#define IRQ_POWERON 4 -#define IRQ_TIMER0 5 -#define IRQ_TIMER1 6 -#define IRQ_FORCE 7 -#define IRQ_INT8 8 -#define IRQ_ISA 9 -#define IRQ_INT6 10 -#define IRQ_INT5 11 -#define IRQ_INT4 12 -#define IRQ_INT3 13 -#define IRQ_KEYBOARDTX 14 -#define IRQ_KEYBOARDRX 15 - -#define IRQ_DMA0 16 -#define IRQ_DMA1 17 -#define IRQ_DMA2 18 -#define IRQ_DMA3 19 -#define IRQ_DMAS0 20 -#define IRQ_DMAS1 21 - -#define IRQ_IOP0 24 -#define IRQ_IOP1 25 -#define IRQ_IOP2 26 -#define IRQ_IOP3 27 -#define IRQ_IOP4 28 -#define IRQ_IOP5 29 -#define IRQ_IOP6 30 -#define IRQ_IOP7 31 - -#define IRQ_MOUSERX 40 -#define IRQ_MOUSETX 41 -#define IRQ_ADC 42 -#define IRQ_EVENT1 43 -#define IRQ_EVENT2 44 - -#define IRQ_ISA_BASE 48 -#define IRQ_ISA_3 48 -#define IRQ_ISA_4 49 -#define IRQ_ISA_5 50 -#define IRQ_ISA_7 51 -#define IRQ_ISA_9 52 -#define IRQ_ISA_10 53 -#define IRQ_ISA_11 54 -#define IRQ_ISA_14 55 - -#define FIQ_INT9 0 -#define FIQ_INT5 1 -#define FIQ_INT6 4 -#define FIQ_INT8 6 -#define FIQ_FORCE 7 - -/* - * This is the offset of the FIQ "IRQ" numbers - */ -#define FIQ_START 64 - -#define IRQ_TIMER IRQ_TIMER0 diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h deleted file mode 100644 index 3178140e24c..00000000000 --- a/include/asm-arm/arch-cl7500/memory.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/memory.h - * - * Copyright (c) 1996,1997,1998 Russell King. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 11-Jan-1998 RMK Uninlined to reduce hits on cache - * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Added TASK_SIZE and PAGE_OFFSET - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x10000000) - -/* - * These are exactly the same on the RiscPC as the - * physical memory view. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - ROM - */ -#define FLUSH_BASE_PHYS 0x00000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-cl7500/system.h b/include/asm-arm/arch-cl7500/system.h deleted file mode 100644 index a9505d6a74d..00000000000 --- a/include/asm-arm/arch-cl7500/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/system.h - * - * Copyright (c) 1999 Nexus Electronics Ltd. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - iomd_writeb(0, IOMD_SUSMODE); -} - -#define arch_reset(mode) \ - do { \ - iomd_writeb(0, IOMD_ROMCR0); \ - cpu_reset(0); \ - } while (0) - -#endif diff --git a/include/asm-arm/arch-cl7500/timex.h b/include/asm-arm/arch-cl7500/timex.h deleted file mode 100644 index 8a4175fc010..00000000000 --- a/include/asm-arm/arch-cl7500/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/timex.h - * - * CL7500 architecture timex specifications - * - * Copyright (C) 1999 Nexus Electronics Ltd - */ - -/* - * On the ARM7500, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h deleted file mode 100644 index c437e0c88c3..00000000000 --- a/include/asm-arm/arch-cl7500/uncompress.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/uncompress.h - * - * Copyright (C) 1999, 2000 Nexus Electronics Ltd. - */ -#define BASE 0x03010000 -#define SERBASE (BASE + (0x2f8 << 2)) - -static inline void putc(char c) -{ - while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20)) - barrier(); - - *((volatile unsigned int *)(SERBASE)) = c; -} - -static inline void flush(void) -{ -} - -static __inline__ void arch_decomp_setup(void) -{ - int baud = 3686400 / (9600 * 32); - - *((volatile unsigned int *)(SERBASE + 0xC)) = 0x80; - *((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff; - *((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8; - *((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */ - *((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */ -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/include/asm-arm/arch-cl7500/vmalloc.h deleted file mode 100644 index ba8d7a84456..00000000000 --- a/include/asm-arm/arch-cl7500/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/vmalloc.h - */ -#define VMALLOC_END (PAGE_OFFSET + 0x1c000000) diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/include/asm-arm/arch-clps711x/autcpu12.h deleted file mode 100644 index 1588a365f61..00000000000 --- a/include/asm-arm/arch-clps711x/autcpu12.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * AUTCPU12 specific defines - * - * (c) 2001 Thomas Gleixner, autronix automation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_AUTCPU12_H -#define __ASM_ARCH_AUTCPU12_H - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - */ -#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */ -#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */ - -/* - * The flash bank is wired to chip select 0 - */ -#define AUTCPU12_PHYS_FLASH CS0_PHYS_BASE /* physical */ - -/* offset for device specific information structure */ -#define AUTCPU12_LCDINFO_OFFS (0x00010000) -/* -* Videomemory is the internal SRAM (CS 6) -*/ -#define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE -#define AUTCPU12_VIRT_VIDEO (0xfd000000) - -/* -* All special IO's are tied to CS1 -*/ -#define AUTCPU12_PHYS_CHAR_LCD CS1_PHYS_BASE +0x00000000 /* physical */ - -#define AUTCPU12_PHYS_NVRAM CS1_PHYS_BASE +0x02000000 /* physical */ - -#define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ - -#define AUTCPU12_PHYS_SMC CS1_PHYS_BASE +0x06000000 /* physical */ - -#define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ - -#define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ - -#define AUTCPU12_PHYS_IO CS1_PHYS_BASE +0x0C000000 /* physical */ - -#define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ - -/* -* defines for smartmedia card access -*/ -#define AUTCPU12_SMC_RDY (1<<2) -#define AUTCPU12_SMC_ALE (1<<3) -#define AUTCPU12_SMC_CLE (1<<4) -#define AUTCPU12_SMC_PORT_OFFSET PBDR -#define AUTCPU12_SMC_SELECT_OFFSET 0x10 -/* -* defines for lcd contrast -*/ -#define AUTCPU12_DPOT_PORT_OFFSET PEDR -#define AUTCPU12_DPOT_CS (1<<0) -#define AUTCPU12_DPOT_CLK (1<<1) -#define AUTCPU12_DPOT_UD (1<<2) - -#endif diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/include/asm-arm/arch-clps711x/debug-macro.S deleted file mode 100644 index bc0a5760722..00000000000 --- a/include/asm-arm/arch-clps711x/debug-macro.S +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/include/asm-arm/arch-clps711x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #CLPS7111_PHYS_BASE - movne \rx, #CLPS7111_VIRT_BASE -#ifndef CONFIG_DEBUG_CLPS711X_UART2 - add \rx, \rx, #0x0000 @ UART1 -#else - add \rx, \rx, #0x1000 @ UART2 -#endif - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0480] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 11 @ UBUSYx - bne 1001b - .endm - - .macro busyuart,rd,rx - tst \rx, #0x1000 @ UART2 does not have CTS here - bne 1002f -1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 8 @ CTS - bne 1001b -1002: - .endm - diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h deleted file mode 100644 index 61099793842..00000000000 --- a/include/asm-arm/arch-clps711x/dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S deleted file mode 100644 index 3554887cbcc..00000000000 --- a/include/asm-arm/arch-clps711x/entry-macro.S +++ /dev/null @@ -1,58 +0,0 @@ -/* - * include/asm-arm/arch-clps711x/entry-macro.S - * - * Low-level IRQ helper macros for CLPS711X-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1) -#error INTSR stride != INTMR stride -#endif - - .macro get_irqnr_and_base, irqnr, stat, base, mask - mov \base, #CLPS7111_BASE - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #4 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - movs \stat, \stat, lsr #4 - bne 1001f - - add \base, \base, #INTSR2 - INTSR1 - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #16 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - -1001: tst \stat, #255 - addeq \irqnr, \irqnr, #8 - moveq \stat, \stat, lsr #8 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - - diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h deleted file mode 100644 index 0fdbe72fff2..00000000000 --- a/include/asm-arm/arch-clps711x/hardware.h +++ /dev/null @@ -1,237 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/hardware.h - * - * This file contains the hardware definitions of the Prospector P720T. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - - -#define CLPS7111_VIRT_BASE 0xff000000 -#define CLPS7111_BASE CLPS7111_VIRT_BASE - -/* - * The physical addresses that the external chip select signals map to is - * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212 - * processors. CONFIG_EP72XX_BOOT_ROM is only available if these - * processors are in use. - */ -#ifndef CONFIG_EP72XX_ROM_BOOT -#define CS0_PHYS_BASE (0x00000000) -#define CS1_PHYS_BASE (0x10000000) -#define CS2_PHYS_BASE (0x20000000) -#define CS3_PHYS_BASE (0x30000000) -#define CS4_PHYS_BASE (0x40000000) -#define CS5_PHYS_BASE (0x50000000) -#define CS6_PHYS_BASE (0x60000000) -#define CS7_PHYS_BASE (0x70000000) -#else -#define CS0_PHYS_BASE (0x70000000) -#define CS1_PHYS_BASE (0x60000000) -#define CS2_PHYS_BASE (0x50000000) -#define CS3_PHYS_BASE (0x40000000) -#define CS4_PHYS_BASE (0x30000000) -#define CS5_PHYS_BASE (0x20000000) -#define CS6_PHYS_BASE (0x10000000) -#define CS7_PHYS_BASE (0x00000000) -#endif - -#if defined (CONFIG_ARCH_EP7211) - -#define EP7211_VIRT_BASE CLPS7111_VIRT_BASE -#define EP7211_BASE CLPS7111_VIRT_BASE -#include - -#elif defined (CONFIG_ARCH_EP7212) - -#define EP7212_VIRT_BASE CLPS7111_VIRT_BASE -#define EP7212_BASE CLPS7111_VIRT_BASE -#include - -#endif - -#define SYSPLD_VIRT_BASE 0xfe000000 -#define SYSPLD_BASE SYSPLD_VIRT_BASE - -#ifndef __ASSEMBLER__ - -#define PCIO_BASE IO_BASE - -#endif - - -#if defined (CONFIG_ARCH_AUTCPU12) - -#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE -#define CS89712_BASE CLPS7111_VIRT_BASE - -#include -#include -#include - -#endif - - -#if defined (CONFIG_ARCH_CDB89712) - -#include -#include -#include - -/* dynamic ioremap() areas */ -#define FLASH_START 0x00000000 -#define FLASH_SIZE 0x800000 -#define FLASH_WIDTH 4 - -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - - -/* static cdb89712_map_io() areas */ -#define REGISTER_START 0x80000000 -#define REGISTER_SIZE 0x4000 -#define REGISTER_BASE 0xff000000 - -#define ETHER_START 0x20000000 -#define ETHER_SIZE 0x1000 -#define ETHER_BASE 0xfe000000 - -#endif - - -#if defined (CONFIG_ARCH_EDB7211) - -/* - * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) - * and repeat across it. This is the mapping for it. - * - * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */ - -#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */ - - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - * - * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */ - -#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */ - - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */ - -#endif /* CONFIG_ARCH_EDB7211 */ - - -/* - * Relevant bits in port D, which controls power to the various parts of - * the LCD on the EDB7211. - */ -#define EDB_PD1_LCD_DC_DC_EN (1<<1) -#define EDB_PD2_LCDEN (1<<2) -#define EDB_PD3_LCDBL (1<<3) - - -#if defined (CONFIG_ARCH_CEIVA) - -#define CEIVA_VIRT_BASE CLPS7111_VIRT_BASE -#define CEIVA_BASE CLPS7111_VIRT_BASE - -#include -#include - - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define CEIVA_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define CEIVA_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define CEIVA_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define CEIVA_VIRT_FLASH2 (0xfb000000) /* virtual */ - -#define CEIVA_FLASH_SIZE 0x100000 -#define CEIVA_FLASH_WIDTH 2 - -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - -/* - * SED1355 LCD controller - */ -#define CEIVA_PHYS_SED1355 CS2_PHYS_BASE -#define CEIVA_VIRT_SED1355 (0xfc000000) - -/* - * Relevant bits in port D, which controls power to the various parts of - * the LCD on the Ceiva Photo Max, and reset to the LCD controller. - */ - -// Reset line to SED1355 (must be high to operate) -#define CEIVA_PD1_LCDRST (1<<1) -// LCD panel enable (set to one, to enable LCD) -#define CEIVA_PD4_LCDEN (1<<4) -// Backlight (set to one, to turn on backlight -#define CEIVA_PD5_LCDBL (1<<5) - -/* - * Relevant bits in port B, which report the status of the buttons. - */ - -// White button -#define CEIVA_PB4_WHT_BTN (1<<4) -// Black button -#define CEIVA_PB0_BLK_BTN (1<<0) -#endif // #if defined (CONFIG_ARCH_CEIVA) - -#endif diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h deleted file mode 100644 index 2b84dac8b2f..00000000000 --- a/include/asm-arm/arch-clps711x/io.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -/* - * We don't support ins[lb]/outs[lb]. Make them fault. - */ -#define __raw_readsb(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_readsl(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_writesb(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_writesl(p,d,l) do { *(int *)0 = 0; } while (0) - -#endif diff --git a/include/asm-arm/arch-clps711x/irqs.h b/include/asm-arm/arch-clps711x/irqs.h deleted file mode 100644 index 76025dc8763..00000000000 --- a/include/asm-arm/arch-clps711x/irqs.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/irqs.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupts from INTSR1 - */ -#define IRQ_CSINT 4 -#define IRQ_EINT1 5 -#define IRQ_EINT2 6 -#define IRQ_EINT3 7 -#define IRQ_TC1OI 8 -#define IRQ_TC2OI 9 -#define IRQ_RTCMI 10 -#define IRQ_TINT 11 -#define IRQ_UTXINT1 12 -#define IRQ_URXINT1 13 -#define IRQ_UMSINT 14 -#define IRQ_SSEOTI 15 - -#define INT1_IRQS (0x0000fff0) -#define INT1_ACK_IRQS (0x00004f10) - -/* - * Interrupts from INTSR2 - */ -#define IRQ_KBDINT (16+0) /* bit 0 */ -#define IRQ_SS2RX (16+1) /* bit 1 */ -#define IRQ_SS2TX (16+2) /* bit 2 */ -#define IRQ_UTXINT2 (16+12) /* bit 12 */ -#define IRQ_URXINT2 (16+13) /* bit 13 */ - -#define INT2_IRQS (0x30070000) -#define INT2_ACK_IRQS (0x00010000) - -#define NR_IRQS 30 - diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h deleted file mode 100644 index 42768cc8bfb..00000000000 --- a/include/asm-arm/arch-clps711x/memory.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xc0000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ - -#if defined(CONFIG_ARCH_CDB89712) - -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -#elif defined (CONFIG_ARCH_AUTCPU12) - -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -#else - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - -#endif - - -/* - * Like the SA1100, the EDB7211 has a large gap between physical RAM - * banks. In 2.2, the Psion (CL-PS7110) port added custom support for - * discontiguous physical memory. In 2.4, we can use the standard - * Linux NUMA support. - * - * This is not necessary for EP7211 implementations with only one used - * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM. - */ - -/* - * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 - * uses only one of the two banks (bank #1). However, even within - * bank #1, memory is discontiguous. - * - * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between - * them, so we use 24 for the node max shift to get 16MB node sizes. - */ - -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much more convenient to use Linux's NUMA support to implement - * our memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ -#define NODE_MEM_SIZE_BITS 24 - -#endif - diff --git a/include/asm-arm/arch-clps711x/syspld.h b/include/asm-arm/arch-clps711x/syspld.h deleted file mode 100644 index 960578a22a8..00000000000 --- a/include/asm-arm/arch-clps711x/syspld.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/syspld.h - * - * System Control PLD register definitions. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSPLD_H -#define __ASM_ARCH_SYSPLD_H - -#define SYSPLD_PHYS_BASE (0x10000000) - -#ifndef __ASSEMBLY__ -#include - -#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off)) -#else -#define SYSPLD_REG(type,off) (off) -#endif - -#define PLD_INT SYSPLD_REG(u32, 0x000000) -#define PLD_INT_PENIRQ (1 << 5) -#define PLD_INT_UCB_IRQ (1 << 1) -#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */ - -#define PLD_PWR SYSPLD_REG(u32, 0x000004) -#define PLD_PWR_EXT (1 << 5) -#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */ -#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */ -#define PLD_S3_ON (1 << 2) /* LCD backlight enable */ -#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */ -#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */ - -#define PLD_KBD SYSPLD_REG(u32, 0x000008) -#define PLD_KBD_WAKE (1 << 1) -#define PLD_KBD_EN (1 << 0) - -#define PLD_SPI SYSPLD_REG(u32, 0x00000c) -#define PLD_SPI_EN (1 << 0) - -#define PLD_IO SYSPLD_REG(u32, 0x000010) -#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */ -#define PLD_IO_USER (1 << 5) /* user defined switch */ -#define PLD_IO_LED3 (1 << 4) -#define PLD_IO_LED2 (1 << 3) -#define PLD_IO_LED1 (1 << 2) -#define PLD_IO_LED0 (1 << 1) -#define PLD_IO_LEDEN (1 << 0) - -#define PLD_IRDA SYSPLD_REG(u32, 0x000014) -#define PLD_IRDA_EN (1 << 0) - -#define PLD_COM2 SYSPLD_REG(u32, 0x000018) -#define PLD_COM2_EN (1 << 0) - -#define PLD_COM1 SYSPLD_REG(u32, 0x00001c) -#define PLD_COM1_EN (1 << 0) - -#define PLD_AUD SYSPLD_REG(u32, 0x000020) -#define PLD_AUD_DIV1 (1 << 6) -#define PLD_AUD_DIV0 (1 << 5) -#define PLD_AUD_CLK_SEL1 (1 << 4) -#define PLD_AUD_CLK_SEL0 (1 << 3) -#define PLD_AUD_MIC_PWR (1 << 2) -#define PLD_AUD_MIC_GAIN (1 << 1) -#define PLD_AUD_CODEC_EN (1 << 0) - -#define PLD_CF SYSPLD_REG(u32, 0x000024) -#define PLD_CF2_SLEEP (1 << 5) -#define PLD_CF1_SLEEP (1 << 4) -#define PLD_CF2_nPDREQ (1 << 3) -#define PLD_CF1_nPDREQ (1 << 2) -#define PLD_CF2_nIRQ (1 << 1) -#define PLD_CF1_nIRQ (1 << 0) - -#define PLD_SDC SYSPLD_REG(u32, 0x000028) -#define PLD_SDC_INT_EN (1 << 2) -#define PLD_SDC_WP (1 << 1) -#define PLD_SDC_CD (1 << 0) - -#define PLD_FPGA SYSPLD_REG(u32, 0x00002c) - -#define PLD_CODEC SYSPLD_REG(u32, 0x400000) -#define PLD_CODEC_IRQ3 (1 << 4) -#define PLD_CODEC_IRQ2 (1 << 3) -#define PLD_CODEC_IRQ1 (1 << 2) -#define PLD_CODEC_EN (1 << 0) - -#define PLD_BRITE SYSPLD_REG(u32, 0x400004) -#define PLD_BRITE_UP (1 << 1) -#define PLD_BRITE_DN (1 << 0) - -#define PLD_LCDEN SYSPLD_REG(u32, 0x400008) -#define PLD_LCDEN_EN (1 << 0) - -#define PLD_ID SYSPLD_REG(u32, 0x40000c) - -#define PLD_TCH SYSPLD_REG(u32, 0x400010) -#define PLD_TCH_PENIRQ (1 << 1) -#define PLD_TCH_EN (1 << 0) - -#define PLD_GPIO SYSPLD_REG(u32, 0x400014) -#define PLD_GPIO2 (1 << 2) -#define PLD_GPIO1 (1 << 1) -#define PLD_GPIO0 (1 << 0) - -#endif diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h deleted file mode 100644 index 1f561772bee..00000000000 --- a/include/asm-arm/arch-clps711x/system.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/system.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif diff --git a/include/asm-arm/arch-clps711x/time.h b/include/asm-arm/arch-clps711x/time.h deleted file mode 100644 index 5edaae1c61d..00000000000 --- a/include/asm-arm/arch-clps711x/time.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/time.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include - -extern void clps711x_setup_timer(void); - -/* - * IRQ handler for the timer - */ -static irqreturn_t -p720t_timer_interrupt(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - do_leds(); - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - do_profile(regs); - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init time_init(void) -{ - clps711x_setup_timer(); - timer_irq.handler = p720t_timer_interrupt; - setup_irq(IRQ_TC2OI, &timer_irq); -} diff --git a/include/asm-arm/arch-clps711x/timex.h b/include/asm-arm/arch-clps711x/timex.h deleted file mode 100644 index dcbb381da3d..00000000000 --- a/include/asm-arm/arch-clps711x/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/timex.h - * - * Prospector 720T architecture timex specifications - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 512000 diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h deleted file mode 100644 index 8c5684ad086..00000000000 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/uncompress.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#undef CLPS7111_BASE -#define CLPS7111_BASE CLPS7111_PHYS_BASE - -#define __raw_readl(p) (*(unsigned long *)(p)) -#define __raw_writel(v,p) (*(unsigned long *)(p) = (v)) - -#ifdef CONFIG_DEBUG_CLPS711X_UART2 -#define SYSFLGx SYSFLG2 -#define UARTDRx UARTDR2 -#else -#define SYSFLGx SYSFLG1 -#define UARTDRx UARTDR1 -#endif - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) - barrier(); - clps_writel(c, UARTDRx); -} - -static inline void flush(void) -{ - while (clps_readl(SYSFLGx) & SYSFLG_UBUSY) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/include/asm-arm/arch-clps711x/vmalloc.h deleted file mode 100644 index a5dfe96abc9..00000000000 --- a/include/asm-arm/arch-clps711x/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/vmalloc.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-davinci/clock.h b/include/asm-arm/arch-davinci/clock.h deleted file mode 100644 index cc168b7a14f..00000000000 --- a/include/asm-arm/arch-davinci/clock.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-davinci/clock.h - * - * Clock control driver for DaVinci - header file - * - * Authors: Vladimir Barinov - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DAVINCI_CLOCK_H -#define __ASM_ARCH_DAVINCI_CLOCK_H - -struct clk; - -extern int clk_register(struct clk *clk); -extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); - -#endif diff --git a/include/asm-arm/arch-davinci/common.h b/include/asm-arm/arch-davinci/common.h deleted file mode 100644 index a97dfbb15e5..00000000000 --- a/include/asm-arm/arch-davinci/common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Header for code common to all DaVinci machines. - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H -#define __ARCH_ARM_MACH_DAVINCI_COMMON_H - -struct sys_timer; - -extern struct sys_timer davinci_timer; - -#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/include/asm-arm/arch-davinci/debug-macro.S deleted file mode 100644 index e6c0f0d5d06..00000000000 --- a/include/asm-arm/arch-davinci/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Debugging macro for DaVinci - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x01000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00c20000 @ UART 0 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-davinci/dma.h b/include/asm-arm/arch-davinci/dma.h deleted file mode 100644 index 8e2f2d0ba66..00000000000 --- a/include/asm-arm/arch-davinci/dma.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * DaVinci DMA definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_ADDRESS 0xffffffff - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S deleted file mode 100644 index 3ebfcc5cb58..00000000000 --- a/include/asm-arm/arch-davinci/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Low-level IRQ helper macros for TI DaVinci-based platforms - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE) - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \tmp, [\base, #0x14] - mov \tmp, \tmp, lsr #2 - sub \irqnr, \tmp, #1 - cmp \tmp, #0 - .endm - - .macro irq_prio_table - .endm diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h deleted file mode 100644 index 54fda734649..00000000000 --- a/include/asm-arm/arch-davinci/gpio.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_GPIO_H -#define __DAVINCI_GPIO_H - -#include -#include - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are - * used as gpios, not with other peripherals. - * - * GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, and maybe - * for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) - */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ - -struct gpio_controller { - u32 dir; - u32 out_data; - u32 set_data; - u32 clr_data; - u32 in_data; - u32 set_rising; - u32 clr_rising; - u32 set_falling; - u32 clr_falling; - u32 intstat; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct gpio_controller *__iomem -__gpio_to_controller(unsigned gpio) -{ - void *__iomem ptr; - - if (gpio < 32) - ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) - ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) - ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); - else - ptr = NULL; - return ptr; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} - -/* The get/set/clear functions will inline when called with constant - * parameters, for low-overhead bitbanging. Illegal constant parameters - * cause link-time errors. - * - * Otherwise, calls with variable parameters use outlined functions. - */ -extern int __error_inval_gpio(void); - -extern void __gpio_set(unsigned gpio, int value); -extern int __gpio_get(unsigned gpio); - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(value)) { - struct gpio_controller *__iomem g; - u32 mask; - - if (gpio >= DAVINCI_N_GPIO) - __error_inval_gpio(); - - g = __gpio_to_controller(gpio); - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, &g->set_data); - else - __raw_writel(mask, &g->clr_data); - return; - } - - __gpio_set(gpio, value); -} - -/* Returns zero or nonzero; works for gpios configured as inputs OR - * as outputs. - * - * NOTE: changes in reported values are synchronized to the GPIO clock. - * This is most easily seen after calling gpio_set_value() and then immediatly - * gpio_get_value(), where the gpio_get_value() would return the old value - * until the GPIO clock ticks and the new value gets latched. - */ - -static inline int gpio_get_value(unsigned gpio) -{ - struct gpio_controller *__iomem g; - - if (!__builtin_constant_p(gpio)) - return __gpio_get(gpio); - - if (gpio >= DAVINCI_N_GPIO) - return __error_inval_gpio(); - - g = __gpio_to_controller(gpio); - return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data)); -} - -/* powerup default direction is IN */ -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - -#include /* cansleep wrappers */ - -extern int gpio_request(unsigned gpio, const char *tag); -extern void gpio_free(unsigned gpio); - -static inline int gpio_to_irq(unsigned gpio) -{ - return DAVINCI_N_AINTC_IRQ + gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq - DAVINCI_N_AINTC_IRQ; -} - -#endif /* __DAVINCI_GPIO_H */ diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h deleted file mode 100644 index a2e8969afac..00000000000 --- a/include/asm-arm/arch-davinci/hardware.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Common hardware definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * Base register addresses - */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-davinci/i2c.h b/include/asm-arm/arch-davinci/i2c.h deleted file mode 100644 index e2f54168abd..00000000000 --- a/include/asm-arm/arch-davinci/i2c.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * DaVinci I2C controller platfrom_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency */ - unsigned int bus_delay; /* transaction delay */ -}; - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/include/asm-arm/arch-davinci/io.h b/include/asm-arm/arch-davinci/io.h deleted file mode 100644 index e7accb91086..00000000000 --- a/include/asm-arm/arch-davinci/io.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * DaVinci IO address definitions - * - * Copied from include/asm/arm/arch-omap/io.h - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- - */ -#define IO_PHYS 0x01c00000 -#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */ -#define IO_SIZE 0x00400000 -#define IO_VIRT (IO_PHYS + IO_OFFSET) -#define io_p2v(pa) ((pa) + IO_OFFSET) -#define io_v2p(va) ((va) - IO_OFFSET) -#define IO_ADDRESS(x) io_p2v(x) - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define PCIO_BASE 0 -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#define __mem_pci(a) (a) -#define __mem_isa(a) (a) - -#ifndef __ASSEMBLER__ - -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) -#define davinci_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) -#define davinci_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) - -#define davinci_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) -#define davinci_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) -#define davinci_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) - -/* 16 bit uses LDRH/STRH, base +/- offset_8 */ -typedef struct { volatile u16 offset[256]; } __regbase16; -#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \ - ->offset[((vaddr)&0xff)>>1] -#define __REG16(paddr) __REGV16(io_p2v(paddr)) - -/* 8/32 bit uses LDR/STR, base +/- offset_12 */ -typedef struct { volatile u8 offset[4096]; } __regbase8; -#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \ - ->offset[((vaddr)&4095)>>0] -#define __REG8(paddr) __REGV8(io_p2v(paddr)) - -typedef struct { volatile u32 offset[4096]; } __regbase32; -#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \ - ->offset[((vaddr)&4095)>>2] - -#define __REG(paddr) __REGV32(io_p2v(paddr)) -#else - -#define __REG(x) (*((volatile unsigned long *)io_p2v(x))) - -#endif /* __ASSEMBLER__ */ -#endif /* __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-davinci/irqs.h b/include/asm-arm/arch-davinci/irqs.h deleted file mode 100644 index f4c5ca6da9f..00000000000 --- a/include/asm-arm/arch-davinci/irqs.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * DaVinci interrupt controller definitions - * - * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* Base address */ -#define DAVINCI_ARM_INTC_BASE 0x01C48000 - -/* Interrupt lines */ -#define IRQ_VDINT0 0 -#define IRQ_VDINT1 1 -#define IRQ_VDINT2 2 -#define IRQ_HISTINT 3 -#define IRQ_H3AINT 4 -#define IRQ_PRVUINT 5 -#define IRQ_RSZINT 6 -#define IRQ_VFOCINT 7 -#define IRQ_VENCINT 8 -#define IRQ_ASQINT 9 -#define IRQ_IMXINT 10 -#define IRQ_VLCDINT 11 -#define IRQ_USBINT 12 -#define IRQ_EMACINT 13 - -#define IRQ_CCINT0 16 -#define IRQ_CCERRINT 17 -#define IRQ_TCERRINT0 18 -#define IRQ_TCERRINT 19 -#define IRQ_PSCIN 20 - -#define IRQ_IDE 22 -#define IRQ_HPIINT 23 -#define IRQ_MBXINT 24 -#define IRQ_MBRINT 25 -#define IRQ_MMCINT 26 -#define IRQ_SDIOINT 27 -#define IRQ_MSINT 28 -#define IRQ_DDRINT 29 -#define IRQ_AEMIFINT 30 -#define IRQ_VLQINT 31 -#define IRQ_TINT0_TINT12 32 -#define IRQ_TINT0_TINT34 33 -#define IRQ_TINT1_TINT12 34 -#define IRQ_TINT1_TINT34 35 -#define IRQ_PWMINT0 36 -#define IRQ_PWMINT1 37 -#define IRQ_PWMINT2 38 -#define IRQ_I2C 39 -#define IRQ_UARTINT0 40 -#define IRQ_UARTINT1 41 -#define IRQ_UARTINT2 42 -#define IRQ_SPINT0 43 -#define IRQ_SPINT1 44 - -#define IRQ_DSP2ARM0 46 -#define IRQ_DSP2ARM1 47 -#define IRQ_GPIO0 48 -#define IRQ_GPIO1 49 -#define IRQ_GPIO2 50 -#define IRQ_GPIO3 51 -#define IRQ_GPIO4 52 -#define IRQ_GPIO5 53 -#define IRQ_GPIO6 54 -#define IRQ_GPIO7 55 -#define IRQ_GPIOBNK0 56 -#define IRQ_GPIOBNK1 57 -#define IRQ_GPIOBNK2 58 -#define IRQ_GPIOBNK3 59 -#define IRQ_GPIOBNK4 60 -#define IRQ_COMMTX 61 -#define IRQ_COMMRX 62 -#define IRQ_EMUINT 63 - -#define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 - -#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) - -#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-davinci/memory.h b/include/asm-arm/arch-davinci/memory.h deleted file mode 100644 index dd1625c23cf..00000000000 --- a/include/asm-arm/arch-davinci/memory.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * DaVinci memory space definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/************************************************************************** - * Included Files - **************************************************************************/ -#include -#include - -/************************************************************************** - * Definitions - **************************************************************************/ -#define DAVINCI_DDR_BASE 0x80000000 -#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */ - -#define PHYS_OFFSET DAVINCI_DDR_BASE - -/* - * Increase size of DMA-consistent memory region - */ -#define CONSISTENT_DMA_SIZE (14<<20) - -#ifndef __ASSEMBLY__ -/* - * Restrict DMA-able region to workaround silicon bug. The bug - * restricts buffers available for DMA to video hardware to be - * below 128M - */ -static inline void -__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) -{ - unsigned int sz = (128<<20) >> PAGE_SHIFT; - - if (node != 0) - sz = 0; - - size[1] = size[0] - sz; - size[0] = sz; -} - -#define arch_adjust_zones(node, zone_size, holes) \ - if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1) - -#endif - -/* - * Bus address is physical address - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/include/asm-arm/arch-davinci/mux.h b/include/asm-arm/arch-davinci/mux.h deleted file mode 100644 index c24b6782804..00000000000 --- a/include/asm-arm/arch-davinci/mux.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * DaVinci pin multiplexing defines - * - * Author: Vladimir Barinov, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ diff --git a/include/asm-arm/arch-davinci/psc.h b/include/asm-arm/arch-davinci/psc.h deleted file mode 100644 index 4977aa071e1..00000000000 --- a/include/asm-arm/arch-davinci/psc.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * DaVinci Power & Sleep Controller (PSC) defines - * - * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#ifndef __ASM_ARCH_PSC_H -#define __ASM_ARCH_PSC_H - -/* Power and Sleep Controller (PSC) Domains */ -#define DAVINCI_GPSC_ARMDOMAIN 0 -#define DAVINCI_GPSC_DSPDOMAIN 1 - -#define DAVINCI_LPSC_VPSSMSTR 0 -#define DAVINCI_LPSC_VPSSSLV 1 -#define DAVINCI_LPSC_TPCC 2 -#define DAVINCI_LPSC_TPTC0 3 -#define DAVINCI_LPSC_TPTC1 4 -#define DAVINCI_LPSC_EMAC 5 -#define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 -#define DAVINCI_LPSC_USB 9 -#define DAVINCI_LPSC_ATA 10 -#define DAVINCI_LPSC_VLYNQ 11 -#define DAVINCI_LPSC_UHPI 12 -#define DAVINCI_LPSC_DDR_EMIF 13 -#define DAVINCI_LPSC_AEMIF 14 -#define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 -#define DAVINCI_LPSC_McBSP 17 -#define DAVINCI_LPSC_I2C 18 -#define DAVINCI_LPSC_UART0 19 -#define DAVINCI_LPSC_UART1 20 -#define DAVINCI_LPSC_UART2 21 -#define DAVINCI_LPSC_SPI 22 -#define DAVINCI_LPSC_PWM0 23 -#define DAVINCI_LPSC_PWM1 24 -#define DAVINCI_LPSC_PWM2 25 -#define DAVINCI_LPSC_GPIO 26 -#define DAVINCI_LPSC_TIMER0 27 -#define DAVINCI_LPSC_TIMER1 28 -#define DAVINCI_LPSC_TIMER2 29 -#define DAVINCI_LPSC_SYSTEM_SUBSYS 30 -#define DAVINCI_LPSC_ARM 31 -#define DAVINCI_LPSC_SCR2 32 -#define DAVINCI_LPSC_SCR3 33 -#define DAVINCI_LPSC_SCR4 34 -#define DAVINCI_LPSC_CROSSBAR 35 -#define DAVINCI_LPSC_CFG27 36 -#define DAVINCI_LPSC_CFG3 37 -#define DAVINCI_LPSC_CFG5 38 -#define DAVINCI_LPSC_GEM 39 -#define DAVINCI_LPSC_IMCOP 40 - -#endif /* __ASM_ARCH_PSC_H */ diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h deleted file mode 100644 index ed418ef7680..00000000000 --- a/include/asm-arm/arch-davinci/serial.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * DaVinci serial device definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include - -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) - -#endif /* __ASM_ARCH_SERIAL_H */ diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h deleted file mode 100644 index 6713e4a44ee..00000000000 --- a/include/asm-arm/arch-davinci/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * DaVinci system defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -extern void davinci_watchdog_reset(void); - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -static void arch_reset(char mode) -{ - davinci_watchdog_reset(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-davinci/timex.h b/include/asm-arm/arch-davinci/timex.h deleted file mode 100644 index 52827567841..00000000000 --- a/include/asm-arm/arch-davinci/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* The source frequency for the timers is the 27MHz clock */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h deleted file mode 100644 index f6d1570f720..00000000000 --- a/include/asm-arm/arch-davinci/uncompress.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Serial port stubs for kernel decompress status messages - * - * Author: Anant Gole - * (C) Copyright (C) 2006, Texas Instruments, Inc - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include - -/* PORT_16C550A, in polled non-fifo mode */ - -static void putc(char c) -{ - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; - - while (!(uart[UART_LSR] & UART_LSR_THRE)) - barrier(); - uart[UART_TX] = c; -} - -static inline void flush(void) -{ - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; - while (!(uart[UART_LSR] & UART_LSR_THRE)) - barrier(); -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h deleted file mode 100644 index 9b47fa89b33..00000000000 --- a/include/asm-arm/arch-davinci/vmalloc.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * DaVinci vmalloc definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include - -/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */ -#define VMALLOC_END (IO_VIRT - (2<<20)) diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S deleted file mode 100644 index 9213bfe4831..00000000000 --- a/include/asm-arm/arch-ebsa110/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-ebsa110/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -**/ - - .macro addruart,rx - mov \rx, #0xf0000000 - orr \rx, \rx, #0x00000be0 - .endm - -#define UART_SHIFT 2 -#define FLOW_CONTROL -#include diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h deleted file mode 100644 index c52f9e2ab0b..00000000000 --- a/include/asm-arm/arch-ebsa110/dma.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 DMA definitions - */ diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S deleted file mode 100644 index f242be5c49b..00000000000 --- a/include/asm-arm/arch-ebsa110/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-ebsa110/entry-macro.S - * - * Low-level IRQ helper macros for ebsa110 platform. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - - -#define IRQ_STAT 0xff000000 /* read */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mov \base, #IRQ_STAT - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, stat, base, tmp - ldrb \stat, [\base] @ get interrupts - mov \irqnr, #0 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/include/asm-arm/arch-ebsa110/hardware.h deleted file mode 100644 index 3ce864def41..00000000000 --- a/include/asm-arm/arch-ebsa110/hardware.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/hardware.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains the hardware definitions of the EBSA-110. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * The EBSA110 has a weird "ISA IO" region: - * - * Region 0 (addr = 0xf0000000 + io << 2) - * -------------------------------------------------------- - * Physical region IO region - * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 - * f0000e60 - f0000e64 398 - 399 - * f0000de0 - f0000dfc 378 - 37f lp0 - * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 - * - * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) - * -------------------------------------------------------- - * Physical region IO region - * f00014f1 a79 pnp write data - * f00007c0 - f00007c1 3e0 - 3e1 pcmcia - * f00004f1 279 pnp address - * f0000440 - f000046c 220 - 236 eth0 - * f0000405 203 pnp read data - */ - -#define ISAMEM_PHYS 0xe0000000 -#define ISAMEM_SIZE 0x10000000 - -#define ISAIO_PHYS 0xf0000000 -#define ISAIO_SIZE PGDIR_SIZE - -#define TRICK0_PHYS 0xf2000000 -#define TRICK1_PHYS 0xf2400000 -#define TRICK2_PHYS 0xf2800000 -#define TRICK3_PHYS 0xf2c00000 -#define TRICK4_PHYS 0xf3000000 -#define TRICK5_PHYS 0xf3400000 -#define TRICK6_PHYS 0xf3800000 -#define TRICK7_PHYS 0xf3c00000 - -#define ISAMEM_BASE 0xe0000000 -#define ISAIO_BASE 0xf0000000 - -#define PIT_BASE 0xfc000000 -#define SOFT_BASE 0xfd000000 - -/* - * RAM definitions - */ -#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */ - -#endif - diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h deleted file mode 100644 index 44a4001de80..00000000000 --- a/include/asm-arm/arch-ebsa110/io.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/io.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffff - -u8 __inb8(unsigned int port); -void __outb8(u8 val, unsigned int port); - -u8 __inb16(unsigned int port); -void __outb16(u8 val, unsigned int port); - -u16 __inw(unsigned int port); -void __outw(u16 val, unsigned int port); - -u32 __inl(unsigned int port); -void __outl(u32 val, unsigned int port); - -u8 __readb(const volatile void __iomem *addr); -u16 __readw(const volatile void __iomem *addr); -u32 __readl(const volatile void __iomem *addr); - -void __writeb(u8 val, void __iomem *addr); -void __writew(u16 val, void __iomem *addr); -void __writel(u32 val, void __iomem *addr); - -/* - * Argh, someone forgot the IOCS16 line. We therefore have to handle - * the byte stearing by selecting the correct byte IO functions here. - */ -#ifdef ISA_SIXTEEN_BIT_PERIPHERAL -#define inb(p) __inb16(p) -#define outb(v,p) __outb16(v,p) -#else -#define inb(p) __inb8(p) -#define outb(v,p) __outb8(v,p) -#endif - -#define inw(p) __inw(p) -#define outw(v,p) __outw(v,p) - -#define inl(p) __inl(p) -#define outl(v,p) __outl(v,p) - -#define readb(b) __readb(b) -#define readw(b) __readw(b) -#define readl(b) __readl(b) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb(v,b) __writeb(v,b) -#define writew(v,b) __writew(v,b) -#define writel(v,b) __writel(v,b) - -static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size, - unsigned int flags) -{ - return (void __iomem *)cookie; -} - -#define __arch_ioremap __arch_ioremap -#define __arch_iounmap(cookie) do { } while (0) - -extern void insb(unsigned int port, void *buf, int sz); -extern void insw(unsigned int port, void *buf, int sz); -extern void insl(unsigned int port, void *buf, int sz); - -extern void outsb(unsigned int port, const void *buf, int sz); -extern void outsw(unsigned int port, const void *buf, int sz); -extern void outsl(unsigned int port, const void *buf, int sz); - -/* can't support writesb atm */ -extern void writesw(void __iomem *addr, const void *data, int wordlen); -extern void writesl(void __iomem *addr, const void *data, int longlen); - -/* can't support readsb atm */ -extern void readsw(const void __iomem *addr, void *data, int wordlen); -extern void readsl(const void __iomem *addr, void *data, int longlen); - -#endif diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/include/asm-arm/arch-ebsa110/irqs.h deleted file mode 100644 index ded9bd9d7b8..00000000000 --- a/include/asm-arm/arch-ebsa110/irqs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/irqs.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define NR_IRQS 8 - -#define IRQ_EBSA110_PRINTER 0 -#define IRQ_EBSA110_COM1 1 -#define IRQ_EBSA110_COM2 2 -#define IRQ_EBSA110_ETHERNET 3 -#define IRQ_EBSA110_TIMER0 4 -#define IRQ_EBSA110_TIMER1 5 -#define IRQ_EBSA110_PCMCIA 6 -#define IRQ_EBSA110_IMMEDIATE 7 diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h deleted file mode 100644 index c7c500e176d..00000000000 --- a/include/asm-arm/arch-ebsa110/memory.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/memory.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Moved TASK_SIZE and PAGE_OFFSET here - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * We keep this 1:1 so that we don't interfere - * with the PCMCIA memory regions - */ -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -/* - * Cache flushing area - SRAM - */ -#define FLUSH_BASE_PHYS 0x40000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-ebsa110/system.h b/include/asm-arm/arch-ebsa110/system.h deleted file mode 100644 index d7c8fece0bc..00000000000 --- a/include/asm-arm/arch-ebsa110/system.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/system.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static inline void arch_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -#define arch_reset(mode) cpu_reset(0x80000000) - -#endif diff --git a/include/asm-arm/arch-ebsa110/timex.h b/include/asm-arm/arch-ebsa110/timex.h deleted file mode 100644 index 1e9ef045092..00000000000 --- a/include/asm-arm/arch-ebsa110/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 architecture timex specifications - */ - -/* - * On the EBSA, the clock ticks at weird rates. - * This is therefore not used to calculate the - * divisor. - */ -#define CLOCK_TICK_RATE 47894000 - diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h deleted file mode 100644 index ae5b775eb0b..00000000000 --- a/include/asm-arm/arch-ebsa110/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/uncompress.h - * - * Copyright (C) 1996,1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -#define SERIAL_BASE ((unsigned char *)0xf0000be0) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while (!(v & UART_LSR_THRE)); - - base[UART_TX << 2] = c; -} - -static inline void flush(void) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) != - (UART_LSR_TEMT|UART_LSR_THRE)); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/include/asm-arm/arch-ebsa110/vmalloc.h deleted file mode 100644 index 26674ba4683..00000000000 --- a/include/asm-arm/arch-ebsa110/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/vmalloc.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END (PAGE_OFFSET + 0x1f000000) diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S deleted file mode 100644 index b48cec4a0c4..00000000000 --- a/include/asm-arm/arch-ebsa285/debug-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* linux/include/asm-arm/arch-ebsa285/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include - -#ifndef CONFIG_DEBUG_DC21285_PORT - /* For NetWinder debugging */ - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x7c000000 @ physical - movne \rx, #0xff000000 @ virtual - orr \rx, \rx, #0x000003f8 - .endm - -#define UART_SHIFT 0 -#define FLOW_CONTROL -#include - -#else - /* For EBSA285 debugging */ - .equ dc21285_high, ARMCSR_BASE & 0xff000000 - .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x42000000 - movne \rx, #dc21285_high - .if dc21285_low - orrne \rx, \rx, #dc21285_low - .endif - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x160] @ UARTDR - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x178] @ UARTFLG - tst \rd, #1 << 3 - bne 1001b - .endm - - .macro waituart,rd,rx - .endm -#endif diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h deleted file mode 100644 index 0259ad45d33..00000000000 --- a/include/asm-arm/arch-ebsa285/dma.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/dma.h - * - * Architecture DMA routines - * - * Copyright (C) 1998,1999 Russell King - * Copyright (C) 1998,1999 Philip Blundell - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * The 21285 has two internal DMA channels; we call these 8 and 9. - * On CATS hardware we have an additional eight ISA dma channels - * numbered 0..7. - */ -#define _ISA_DMA(x) (0+(x)) -#define _DC21285_DMA(x) (8+(x)) - -#define MAX_DMA_CHANNELS 10 - -#define DMA_FLOPPY _ISA_DMA(2) -#define DMA_ISA_CASCADE _ISA_DMA(4) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S deleted file mode 100644 index e203c628d50..00000000000 --- a/include/asm-arm/arch-ebsa285/entry-macro.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * include/asm-arm/arch-ebsa285/entry-macro.S - * - * Low-level IRQ helper macros for footbridge-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include - - .equ dc21285_high, ARMCSR_BASE & 0xff000000 - .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mov \base, #dc21285_high - .if dc21285_low - orr \base, \base, #dc21285_low - .endif - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #0x180] @ get interrupts - - mov \irqnr, #IRQ_SDRAMPARITY - tst \irqstat, #IRQ_MASK_SDRAMPARITY - bne 1001f - - tst \irqstat, #IRQ_MASK_UART_RX - movne \irqnr, #IRQ_CONRX - bne 1001f - - tst \irqstat, #IRQ_MASK_DMA1 - movne \irqnr, #IRQ_DMA1 - bne 1001f - - tst \irqstat, #IRQ_MASK_DMA2 - movne \irqnr, #IRQ_DMA2 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN0 - movne \irqnr, #IRQ_IN0 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN1 - movne \irqnr, #IRQ_IN1 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN2 - movne \irqnr, #IRQ_IN2 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN3 - movne \irqnr, #IRQ_IN3 - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI - movne \irqnr, #IRQ_PCI - bne 1001f - - tst \irqstat, #IRQ_MASK_DOORBELLHOST - movne \irqnr, #IRQ_DOORBELLHOST - bne 1001f - - tst \irqstat, #IRQ_MASK_I2OINPOST - movne \irqnr, #IRQ_I2OINPOST - bne 1001f - - tst \irqstat, #IRQ_MASK_TIMER1 - movne \irqnr, #IRQ_TIMER1 - bne 1001f - - tst \irqstat, #IRQ_MASK_TIMER2 - movne \irqnr, #IRQ_TIMER2 - bne 1001f - - tst \irqstat, #IRQ_MASK_TIMER3 - movne \irqnr, #IRQ_TIMER3 - bne 1001f - - tst \irqstat, #IRQ_MASK_UART_TX - movne \irqnr, #IRQ_CONTX - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_ABORT - movne \irqnr, #IRQ_PCI_ABORT - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_SERR - movne \irqnr, #IRQ_PCI_SERR - bne 1001f - - tst \irqstat, #IRQ_MASK_DISCARD_TIMER - movne \irqnr, #IRQ_DISCARD_TIMER - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_DPERR - movne \irqnr, #IRQ_PCI_DPERR - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_PERR - movne \irqnr, #IRQ_PCI_PERR -1001: - .endm - diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h deleted file mode 100644 index 74610c2c63d..00000000000 --- a/include/asm-arm/arch-ebsa285/hardware.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/hardware.h - * - * Copyright (C) 1998-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains the hardware definitions of the EBSA-285. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* Virtual Physical Size - * 0xff800000 0x40000000 1MB X-Bus - * 0xff000000 0x7c000000 1MB PCI I/O space - * 0xfe000000 0x42000000 1MB CSR - * 0xfd000000 0x78000000 1MB Outbound write flush (not supported) - * 0xfc000000 0x79000000 1MB PCI IACK/special space - * 0xfb000000 0x7a000000 16MB PCI Config type 1 - * 0xfa000000 0x7b000000 16MB PCI Config type 0 - * 0xf9000000 0x50000000 1MB Cache flush - * 0xf0000000 0x80000000 16MB ISA memory - */ -#define XBUS_SIZE 0x00100000 -#define XBUS_BASE 0xff800000 - -#define PCIO_SIZE 0x00100000 -#define PCIO_BASE 0xff000000 - -#define ARMCSR_SIZE 0x00100000 -#define ARMCSR_BASE 0xfe000000 - -#define WFLUSH_SIZE 0x00100000 -#define WFLUSH_BASE 0xfd000000 - -#define PCIIACK_SIZE 0x00100000 -#define PCIIACK_BASE 0xfc000000 - -#define PCICFG1_SIZE 0x01000000 -#define PCICFG1_BASE 0xfb000000 - -#define PCICFG0_SIZE 0x01000000 -#define PCICFG0_BASE 0xfa000000 - -#define PCIMEM_SIZE 0x01000000 -#define PCIMEM_BASE 0xf0000000 - -#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000)) -#define XBUS_LED_AMBER (1 << 0) -#define XBUS_LED_GREEN (1 << 1) -#define XBUS_LED_RED (1 << 2) -#define XBUS_LED_TOGGLE (1 << 8) - -#define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000)) -#define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15) -#define XBUS_SWITCH_J17_13 ((*XBUS_SWITCH) & (1 << 4)) -#define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5)) -#define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6)) - -#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108) - - -/* PIC irq control */ -#define PIC_LO 0x20 -#define PIC_MASK_LO 0x21 -#define PIC_HI 0xA0 -#define PIC_MASK_HI 0xA1 - -/* GPIO pins */ -#define GPIO_CCLK 0x800 -#define GPIO_DSCLK 0x400 -#define GPIO_E2CLK 0x200 -#define GPIO_IOLOAD 0x100 -#define GPIO_RED_LED 0x080 -#define GPIO_WDTIMER 0x040 -#define GPIO_DATA 0x020 -#define GPIO_IOCLK 0x010 -#define GPIO_DONE 0x008 -#define GPIO_FAN 0x004 -#define GPIO_GREEN_LED 0x002 -#define GPIO_RESET 0x001 - -/* CPLD pins */ -#define CPLD_DS_ENABLE 8 -#define CPLD_7111_DISABLE 4 -#define CPLD_UNMUTE 2 -#define CPLD_FLASH_WR_ENABLE 1 - -#ifndef __ASSEMBLY__ -extern void gpio_modify_op(int mask, int set); -extern void gpio_modify_io(int mask, int in); -extern int gpio_read(void); -extern void cpld_modify(int mask, int set); -#endif - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x81000000 - -#endif diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h deleted file mode 100644 index e88c6e23038..00000000000 --- a/include/asm-arm/arch-ebsa285/io.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffff - -/* - * Translation of various region addresses to virtual addresses - */ -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#if 1 -#define __mem_pci(a) (a) -#else - -static inline void __iomem *___mem_pci(void __iomem *p) -{ - unsigned long a = (unsigned long)p; - BUG_ON(a <= 0xc0000000 || a >= 0xe0000000); - return p; -} - -#define __mem_pci(a) ___mem_pci(a) -#endif - -#endif diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/include/asm-arm/arch-ebsa285/irqs.h deleted file mode 100644 index 3e766f1cecf..00000000000 --- a/include/asm-arm/arch-ebsa285/irqs.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/irqs.h - * - * Copyright (C) 1998 Russell King - * Copyright (C) 1998 Phil Blundell - * - * Changelog: - * 20-Jan-1998 RMK Started merge of EBSA286, CATS and NetWinder - * 01-Feb-1999 PJB ISA IRQs start at 0 not 16 - */ -#include - -#define NR_IRQS 36 -#define NR_DC21285_IRQS 16 - -#define _ISA_IRQ(x) (0 + (x)) -#define _ISA_INR(x) ((x) - 0) -#define _DC21285_IRQ(x) (16 + (x)) -#define _DC21285_INR(x) ((x) - 16) - -/* - * This is a list of all interrupts that the 21285 - * can generate and we handle. - */ -#define IRQ_CONRX _DC21285_IRQ(0) -#define IRQ_CONTX _DC21285_IRQ(1) -#define IRQ_TIMER1 _DC21285_IRQ(2) -#define IRQ_TIMER2 _DC21285_IRQ(3) -#define IRQ_TIMER3 _DC21285_IRQ(4) -#define IRQ_IN0 _DC21285_IRQ(5) -#define IRQ_IN1 _DC21285_IRQ(6) -#define IRQ_IN2 _DC21285_IRQ(7) -#define IRQ_IN3 _DC21285_IRQ(8) -#define IRQ_DOORBELLHOST _DC21285_IRQ(9) -#define IRQ_DMA1 _DC21285_IRQ(10) -#define IRQ_DMA2 _DC21285_IRQ(11) -#define IRQ_PCI _DC21285_IRQ(12) -#define IRQ_SDRAMPARITY _DC21285_IRQ(13) -#define IRQ_I2OINPOST _DC21285_IRQ(14) -#define IRQ_PCI_ABORT _DC21285_IRQ(15) -#define IRQ_PCI_SERR _DC21285_IRQ(16) -#define IRQ_DISCARD_TIMER _DC21285_IRQ(17) -#define IRQ_PCI_DPERR _DC21285_IRQ(18) -#define IRQ_PCI_PERR _DC21285_IRQ(19) - -#define IRQ_ISA_TIMER _ISA_IRQ(0) -#define IRQ_ISA_KEYBOARD _ISA_IRQ(1) -#define IRQ_ISA_CASCADE _ISA_IRQ(2) -#define IRQ_ISA_UART2 _ISA_IRQ(3) -#define IRQ_ISA_UART _ISA_IRQ(4) -#define IRQ_ISA_FLOPPY _ISA_IRQ(6) -#define IRQ_ISA_PRINTER _ISA_IRQ(7) -#define IRQ_ISA_RTC_ALARM _ISA_IRQ(8) -#define IRQ_ISA_2 _ISA_IRQ(9) -#define IRQ_ISA_PS2MOUSE _ISA_IRQ(12) -#define IRQ_ISA_HARDDISK1 _ISA_IRQ(14) -#define IRQ_ISA_HARDDISK2 _ISA_IRQ(15) - -#define IRQ_MASK_UART_RX (1 << 2) -#define IRQ_MASK_UART_TX (1 << 3) -#define IRQ_MASK_TIMER1 (1 << 4) -#define IRQ_MASK_TIMER2 (1 << 5) -#define IRQ_MASK_TIMER3 (1 << 6) -#define IRQ_MASK_IN0 (1 << 8) -#define IRQ_MASK_IN1 (1 << 9) -#define IRQ_MASK_IN2 (1 << 10) -#define IRQ_MASK_IN3 (1 << 11) -#define IRQ_MASK_DOORBELLHOST (1 << 15) -#define IRQ_MASK_DMA1 (1 << 16) -#define IRQ_MASK_DMA2 (1 << 17) -#define IRQ_MASK_PCI (1 << 18) -#define IRQ_MASK_SDRAMPARITY (1 << 24) -#define IRQ_MASK_I2OINPOST (1 << 25) -#define IRQ_MASK_PCI_ABORT ((1 << 29) | (1 << 30)) -#define IRQ_MASK_PCI_SERR (1 << 23) -#define IRQ_MASK_DISCARD_TIMER (1 << 27) -#define IRQ_MASK_PCI_DPERR (1 << 28) -#define IRQ_MASK_PCI_PERR (1 << 31) - -/* - * Netwinder interrupt allocations - */ -#define IRQ_NETWINDER_ETHER10 IRQ_IN0 -#define IRQ_NETWINDER_ETHER100 IRQ_IN1 -#define IRQ_NETWINDER_VIDCOMP IRQ_IN2 -#define IRQ_NETWINDER_PS2MOUSE _ISA_IRQ(5) -#define IRQ_NETWINDER_IR _ISA_IRQ(6) -#define IRQ_NETWINDER_BUTTON _ISA_IRQ(10) -#define IRQ_NETWINDER_VGA _ISA_IRQ(11) -#define IRQ_NETWINDER_SOUND _ISA_IRQ(12) - -#undef RTC_IRQ -#define RTC_IRQ IRQ_ISA_RTC_ALARM -#define I8042_KBD_IRQ IRQ_ISA_KEYBOARD -#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) -#define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY - -#define irq_canonicalize(_i) (((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i) diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h deleted file mode 100644 index 9019a3bf5ab..00000000000 --- a/include/asm-arm/arch-ebsa285/memory.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/memory.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings. - * 17-May-1998 DAG Added __virt_to_bus and __bus_to_virt functions. - * 21-Nov-1998 RMK Changed __virt_to_bus and __bus_to_virt to macros. - * 21-Mar-1999 RMK Added PAGE_OFFSET for co285 architecture. - * Renamed to memory.h - * Moved PAGE_OFFSET and TASK_SIZE here - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - - -#if defined(CONFIG_FOOTBRIDGE_ADDIN) -/* - * If we may be using add-in footbridge mode, then we must - * use the out-of-line translation that makes use of the - * PCI BAR - */ -#ifndef __ASSEMBLY__ -extern unsigned long __virt_to_bus(unsigned long); -extern unsigned long __bus_to_virt(unsigned long); -#endif - -#elif defined(CONFIG_FOOTBRIDGE_HOST) - -#define __virt_to_bus(x) ((x) - 0xe0000000) -#define __bus_to_virt(x) ((x) + 0xe0000000) - -#else - -#error "Undefined footbridge mode" - -#endif - -/* Task size and page offset at 3GB */ -#define TASK_SIZE UL(0xbf000000) -#define PAGE_OFFSET UL(0xc0000000) - -/* - * Cache flushing area. - */ -#define FLUSH_BASE 0xf9000000 - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3) - -#define FLUSH_BASE_PHYS 0x50000000 - -#endif diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h deleted file mode 100644 index a720bf7ca12..00000000000 --- a/include/asm-arm/arch-ebsa285/system.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - if (mode == 's') { - /* - * Jump into the ROM - */ - cpu_reset(0x41000000); - } else { - if (machine_is_netwinder()) { - /* open up the SuperIO chip - */ - outb(0x87, 0x370); - outb(0x87, 0x370); - - /* aux function group 1 (logical device 7) - */ - outb(0x07, 0x370); - outb(0x07, 0x371); - - /* set GP16 for WD-TIMER output - */ - outb(0xe6, 0x370); - outb(0x00, 0x371); - - /* set a RED LED and toggle WD_TIMER for rebooting - */ - outb(0xc4, 0x338); - } else { - /* - * Force the watchdog to do a CPU reset. - * - * After making sure that the watchdog is disabled - * (so we can change the timer registers) we first - * enable the timer to autoreload itself. Next, the - * timer interval is set really short and any - * current interrupt request is cleared (so we can - * see an edge transition). Finally, TIMER4 is - * enabled as the watchdog. - */ - *CSR_SA110_CNTL &= ~(1 << 13); - *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE | - TIMER_CNTL_AUTORELOAD | - TIMER_CNTL_DIV16; - *CSR_TIMER4_LOAD = 0x2; - *CSR_TIMER4_CLR = 0; - *CSR_SA110_CNTL |= (1 << 13); - } - } -} diff --git a/include/asm-arm/arch-ebsa285/timex.h b/include/asm-arm/arch-ebsa285/timex.h deleted file mode 100644 index df60b3812d9..00000000000 --- a/include/asm-arm/arch-ebsa285/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/timex.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA285 architecture timex specifications - */ - -/* - * We assume a constant here; this satisfies the maths in linux/timex.h - * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but - * this must be a constant. - */ -#define CLOCK_TICK_RATE (50000000/16) diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h deleted file mode 100644 index 86142c882b3..00000000000 --- a/include/asm-arm/arch-ebsa285/uncompress.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/uncompress.h - * - * Copyright (C) 1996-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -/* - * Note! This could cause problems on the NetWinder - */ -#define DC21285_BASE ((volatile unsigned int *)0x42000160) -#define SER0_BASE ((volatile unsigned char *)0x7c0003f8) - -static inline void putc(char c) -{ - if (machine_is_netwinder()) { - while ((SER0_BASE[5] & 0x60) != 0x60) - barrier(); - SER0_BASE[0] = c; - } else { - while (DC21285_BASE[6] & 8); - DC21285_BASE[0] = c; - } -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h deleted file mode 100644 index e487d7e8c8a..00000000000 --- a/include/asm-arm/arch-ebsa285/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#define VMALLOC_END (PAGE_OFFSET + 0x30000000) diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S deleted file mode 100644 index 397565a0c67..00000000000 --- a/include/asm-arm/arch-ep93xx/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/debug-macro.S - * Debugging macro include header - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base - ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rx, \rx, #0x000c0000 - .endm - -#include diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h deleted file mode 100644 index 898b3ab7fd4..00000000000 --- a/include/asm-arm/arch-ep93xx/dma.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/dma.h - */ diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S deleted file mode 100644 index 241ec221a04..00000000000 --- a/include/asm-arm/arch-ep93xx/entry-macro.S +++ /dev/null @@ -1,59 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/entry-macro.S - * IRQ demultiplexing for EP93xx - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(EP93XX_AHB_VIRT_BASE) - orr \base, \base, #0x000b0000 - mov \irqnr, #0 - ldr \irqstat, [\base] @ lower 32 interrupts - cmp \irqstat, #0 - bne 1001f - - eor \base, \base, #0x00070000 - ldr \irqstat, [\base] @ upper 32 interrupts - cmp \irqstat, #0 - beq 1002f - mov \irqnr, #0x20 - -1001: - movs \tmp, \irqstat, lsl #16 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - - movs \tmp, \irqstat, lsl #8 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #8 - - movs \tmp, \irqstat, lsl #4 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #4 - - movs \tmp, \irqstat, lsl #2 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #2 - - movs \tmp, \irqstat, lsl #1 - addeq \irqnr, \irqnr, #1 - orrs \base, \base, #1 - -1002: - .endm diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h deleted file mode 100644 index 625c6f0abc0..00000000000 --- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h - */ - -#ifndef __ASM_ARCH_EP93XX_REGS_H -#define __ASM_ARCH_EP93XX_REGS_H - -/* - * EP93xx linux memory map: - * - * virt phys size - * fe800000 5M per-platform mappings - * fed00000 80800000 2M APB - * fef00000 80000000 1M AHB - */ - -#define EP93XX_AHB_PHYS_BASE 0x80000000 -#define EP93XX_AHB_VIRT_BASE 0xfef00000 -#define EP93XX_AHB_SIZE 0x00100000 - -#define EP93XX_APB_PHYS_BASE 0x80800000 -#define EP93XX_APB_VIRT_BASE 0xfed00000 -#define EP93XX_APB_SIZE 0x00200000 - - -/* AHB peripherals */ -#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000) - -#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000) -#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) - -#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000) -#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) - -#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000) - -#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000) - -#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000) - -#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000) - -#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000) - - -/* APB peripherals */ -#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000) -#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) -#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) -#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) -#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) -#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) -#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) -#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) -#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) -#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) -#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) -#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) -#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) -#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) -#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) -#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) - -#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000) - -#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000) - -#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c) -#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50) -#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54) -#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) -#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) -#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) -#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac) -#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0) -#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4) -#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) - -#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000) - -#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000) - -#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000) - -#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000) -#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000) - -#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000) -#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000) - -#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000) -#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000) - -#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000) - -#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) -#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) - -#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) - -#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) - -#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000 -#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) - - -#endif diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h deleted file mode 100644 index 4d0b3023bff..00000000000 --- a/include/asm-arm/arch-ep93xx/gesbc9312.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/gesbc9312.h - */ diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h deleted file mode 100644 index 186e7c715f8..00000000000 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/gpio.h - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -/* new generic GPIO API - see Documentation/gpio.txt */ - -#include - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Map GPIO A0..A7 (0..7) to irq 64..71, - * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (16..24) to irq 80..87. - */ -static inline int gpio_to_irq(unsigned gpio) -{ - if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) - return 64 + gpio; - - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq - gpio_to_irq(0); -} - -#endif diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h deleted file mode 100644 index 4233f6e8515..00000000000 --- a/include/asm-arm/arch-ep93xx/hardware.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/hardware.h - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "ep93xx-regs.h" - -#define pcibios_assign_all_busses() 0 - -#include "platform.h" - -#include "gesbc9312.h" -#include "ts72xx.h" - -#endif diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h deleted file mode 100644 index 7b4d25e2906..00000000000 --- a/include/asm-arm/arch-ep93xx/io.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/io.h - */ - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) ((void __iomem *)(p)) -#define __mem_pci(p) (p) diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h deleted file mode 100644 index 53d4a68bfc8..00000000000 --- a/include/asm-arm/arch-ep93xx/irqs.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/irqs.h - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_EP93XX_COMMRX 2 -#define IRQ_EP93XX_COMMTX 3 -#define IRQ_EP93XX_TIMER1 4 -#define IRQ_EP93XX_TIMER2 5 -#define IRQ_EP93XX_AACINTR 6 -#define IRQ_EP93XX_DMAM2P0 7 -#define IRQ_EP93XX_DMAM2P1 8 -#define IRQ_EP93XX_DMAM2P2 9 -#define IRQ_EP93XX_DMAM2P3 10 -#define IRQ_EP93XX_DMAM2P4 11 -#define IRQ_EP93XX_DMAM2P5 12 -#define IRQ_EP93XX_DMAM2P6 13 -#define IRQ_EP93XX_DMAM2P7 14 -#define IRQ_EP93XX_DMAM2P8 15 -#define IRQ_EP93XX_DMAM2P9 16 -#define IRQ_EP93XX_DMAM2M0 17 -#define IRQ_EP93XX_DMAM2M1 18 -#define IRQ_EP93XX_GPIO0MUX 19 -#define IRQ_EP93XX_GPIO1MUX 20 -#define IRQ_EP93XX_GPIO2MUX 21 -#define IRQ_EP93XX_GPIO3MUX 22 -#define IRQ_EP93XX_UART1RX 23 -#define IRQ_EP93XX_UART1TX 24 -#define IRQ_EP93XX_UART2RX 25 -#define IRQ_EP93XX_UART2TX 26 -#define IRQ_EP93XX_UART3RX 27 -#define IRQ_EP93XX_UART3TX 28 -#define IRQ_EP93XX_KEY 29 -#define IRQ_EP93XX_TOUCH 30 -#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc - -#define IRQ_EP93XX_EXT0 32 -#define IRQ_EP93XX_EXT1 33 -#define IRQ_EP93XX_EXT2 34 -#define IRQ_EP93XX_64HZ 35 -#define IRQ_EP93XX_WATCHDOG 36 -#define IRQ_EP93XX_RTC 37 -#define IRQ_EP93XX_IRDA 38 -#define IRQ_EP93XX_ETHERNET 39 -#define IRQ_EP93XX_EXT3 40 -#define IRQ_EP93XX_PROG 41 -#define IRQ_EP93XX_1HZ 42 -#define IRQ_EP93XX_VSYNC 43 -#define IRQ_EP93XX_VIDEO_FIFO 44 -#define IRQ_EP93XX_SSP1RX 45 -#define IRQ_EP93XX_SSP1TX 46 -#define IRQ_EP93XX_GPIO4MUX 47 -#define IRQ_EP93XX_GPIO5MUX 48 -#define IRQ_EP93XX_GPIO6MUX 49 -#define IRQ_EP93XX_GPIO7MUX 50 -#define IRQ_EP93XX_TIMER3 51 -#define IRQ_EP93XX_UART1 52 -#define IRQ_EP93XX_SSP 53 -#define IRQ_EP93XX_UART2 54 -#define IRQ_EP93XX_UART3 55 -#define IRQ_EP93XX_USB 56 -#define IRQ_EP93XX_ETHERNET_PME 57 -#define IRQ_EP93XX_DSP 58 -#define IRQ_EP93XX_GPIO_AB 59 -#define IRQ_EP93XX_SAI 60 -#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff - -#define NR_EP93XX_IRQS (64 + 24) - -#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -#define EP93XX_BOARD_IRQS 32 - -#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS) - - -#endif diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h deleted file mode 100644 index 4b1a5c7c836..00000000000 --- a/include/asm-arm/arch-ep93xx/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __bus_to_virt(x) __phys_to_virt(x) -#define __virt_to_bus(x) __virt_to_phys(x) - - -#endif diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h deleted file mode 100644 index 44eccec2cba..00000000000 --- a/include/asm-arm/arch-ep93xx/platform.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/platform.h - */ - -#ifndef __ASSEMBLY__ - -void ep93xx_map_io(void); -void ep93xx_init_irq(void); -void ep93xx_init_time(unsigned long); -void ep93xx_init_devices(void); -extern struct sys_timer ep93xx_timer; - -struct ep93xx_eth_data -{ - unsigned char dev_addr[6]; - unsigned char phy_id; -}; - - -#endif diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h deleted file mode 100644 index f1a5acf5191..00000000000 --- a/include/asm-arm/arch-ep93xx/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/system.h - */ - -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - u32 devicecfg; - - local_irq_disable(); - - devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); - - while (1) - ; -} diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h deleted file mode 100644 index 4140bddc97e..00000000000 --- a/include/asm-arm/arch-ep93xx/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/timex.h - */ - -#define CLOCK_TICK_RATE 983040 diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h deleted file mode 100644 index a94f63ff053..00000000000 --- a/include/asm-arm/arch-ep93xx/ts72xx.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/ts72xx.h - */ - -/* - * TS72xx memory map: - * - * virt phys size - * febff000 22000000 4K model number register - * febfe000 22400000 4K options register - * febfd000 22800000 4K options register #2 - * febfc000 [67]0000000 4K NAND data register - * febfb000 [67]0400000 4K NAND control register - * febfa000 [67]0800000 4K NAND busy register - * febf9000 10800000 4K TS-5620 RTC index register - * febf8000 11700000 4K TS-5620 RTC data register - */ - -#define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE 0xfebff000 -#define TS72XX_MODEL_SIZE 0x00001000 - -#define TS72XX_MODEL_TS7200 0x00 -#define TS72XX_MODEL_TS7250 0x01 -#define TS72XX_MODEL_TS7260 0x02 - - -#define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000 -#define TS72XX_OPTIONS_SIZE 0x00001000 - -#define TS72XX_OPTIONS_COM2_RS485 0x02 -#define TS72XX_OPTIONS_MAX197 0x01 - - -#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000 -#define TS72XX_OPTIONS2_SIZE 0x00001000 - -#define TS72XX_OPTIONS2_TS9420 0x04 -#define TS72XX_OPTIONS2_TS9420_BOOT 0x02 - - -#define TS72XX_NOR_PHYS_BASE 0x60000000 -#define TS72XX_NOR2_PHYS_BASE 0x62000000 - -#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000 -#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000 -#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000 -#define TS72XX_NAND_DATA_SIZE 0x00001000 - -#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000 -#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000 -#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000 -#define TS72XX_NAND_CONTROL_SIZE 0x00001000 - -#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000 -#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000 -#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000 -#define TS72XX_NAND_BUSY_SIZE 0x00001000 - - -#define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000 -#define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000 -#define TS72XX_RTC_INDEX_SIZE 0x00001000 - -#define TS72XX_RTC_DATA_VIRT_BASE 0xfebf8000 -#define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 -#define TS72XX_RTC_DATA_SIZE 0x00001000 - - -#ifndef __ASSEMBLY__ -#include - -static inline int board_is_ts7200(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; -} - -static inline int board_is_ts7250(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; -} - -static inline int board_is_ts7260(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; -} - -static inline int is_max197_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & - TS72XX_OPTIONS_MAX197); -} - -static inline int is_ts9420_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & - TS72XX_OPTIONS2_TS9420); -} -#endif diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h deleted file mode 100644 index c15274c85d5..00000000000 --- a/include/asm-arm/arch-ep93xx/uncompress.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/uncompress.h - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include - -static unsigned char __raw_readb(unsigned int ptr) -{ - return *((volatile unsigned char *)ptr); -} - -static unsigned int __raw_readl(unsigned int ptr) -{ - return *((volatile unsigned int *)ptr); -} - -static void __raw_writeb(unsigned char value, unsigned int ptr) -{ - *((volatile unsigned char *)ptr) = value; -} - -static void __raw_writel(unsigned int value, unsigned int ptr) -{ - *((volatile unsigned int *)ptr) = value; -} - - -#define PHYS_UART1_DATA 0x808c0000 -#define PHYS_UART1_FLAG 0x808c0018 -#define UART1_FLAG_TXFF 0x20 - -static inline void putc(int c) -{ - int i; - - for (i = 0; i < 1000; i++) { - /* Transmit fifo not full? */ - if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF)) - break; - } - - __raw_writeb(c, PHYS_UART1_DATA); -} - -static inline void flush(void) -{ -} - - -/* - * Some bootloaders don't turn off DMA from the ethernet MAC before - * jumping to linux, which means that we might end up with bits of RX - * status and packet data scribbled over the uncompressed kernel image. - * Work around this by resetting the ethernet MAC before we uncompress. - */ -#define PHYS_ETH_SELF_CTL 0x80010020 -#define ETH_SELF_CTL_RESET 0x00000001 - -static void ethernet_reset(void) -{ - unsigned int v; - - /* Reset the ethernet MAC. */ - v = __raw_readl(PHYS_ETH_SELF_CTL); - __raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL); - - /* Wait for reset to finish. */ - while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET) - ; -} - - -static void arch_decomp_setup(void) -{ - ethernet_reset(); -} - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h deleted file mode 100644 index 205ea6b1cf5..00000000000 --- a/include/asm-arm/arch-ep93xx/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000 diff --git a/include/asm-arm/arch-h720x/boards.h b/include/asm-arm/arch-h720x/boards.h deleted file mode 100644 index 8021f81f074..00000000000 --- a/include/asm-arm/arch-h720x/boards.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/boards.h - * - * Copyright (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * - * This file contains the board specific defines for various devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_INCMACH_H -#error Do not include this file directly. Include asm/hardware.h instead ! -#endif - -/* Hynix H7202 developer board specific device defines */ -#ifdef CONFIG_ARCH_H7202 - -/* FLASH */ -#define FLASH_VIRT 0xd0000000 -#define FLASH_PHYS 0x00000000 -#define FLASH_SIZE 0x02000000 - -/* onboard LAN controller */ -# define ETH0_PHYS 0x08000000 - -/* Touch screen defines */ -/* GPIO Port */ -#define PEN_GPIO GPIO_B_VIRT -/* Bitmask for pen down interrupt */ -#define PEN_INT_BIT (1<<7) -/* Bitmask for pen up interrupt */ -#define PEN_ENA_BIT (1<<6) -/* pen up interrupt */ -#define IRQ_PEN IRQ_MUX_GPIOB(7) - -#endif - -/* Hynix H7201 developer board specific device defines */ -#if defined (CONFIG_ARCH_H7201) -/* ROM DISK SPACE */ -#define ROM_DISK_BASE 0xc1800000 -#define ROM_DISK_START 0x41800000 -#define ROM_DISK_SIZE 0x00700000 - -/* SRAM DISK SPACE */ -#define SRAM_DISK_BASE 0xf1000000 -#define SRAM_DISK_START 0x04000000 -#define SRAM_DISK_SIZE 0x00400000 -#endif - diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/include/asm-arm/arch-h720x/debug-macro.S deleted file mode 100644 index 82822d36273..00000000000 --- a/include/asm-arm/arch-h720x/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-h720x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00020000 @ UART1 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/include/asm-arm/arch-h720x/dma.h b/include/asm-arm/arch-h720x/dma.h deleted file mode 100644 index bfc6636679f..00000000000 --- a/include/asm-arm/arch-h720x/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/dma.h - * - * Architecture DMA routes - * - * Copyright (C) 1997.1998 Russell King - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 - -#if defined (CONFIG_CPU_H7201) -#define MAX_DMA_CHANNELS 3 -#elif defined (CONFIG_CPU_H7202) -#define MAX_DMA_CHANNELS 4 -#else -#error processor definition missmatch -#endif - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/include/asm-arm/arch-h720x/entry-macro.S deleted file mode 100644 index 38dd63ae104..00000000000 --- a/include/asm-arm/arch-h720x/entry-macro.S +++ /dev/null @@ -1,66 +0,0 @@ -/* - * include/asm-arm/arch-h720x/entry-macro.S - * - * Low-level IRQ helper macros for Hynix HMS720x based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202) - @ we could use the id register on H7202, but this is not - @ properly updated when we come back from asm_do_irq - @ without a previous return from interrupt - @ (see loops below in irq_svc, irq_usr) - @ We see unmasked pending ints only, as the masked pending ints - @ are not visible here - - mov \base, #0xf0000000 @ base register - orr \base, \base, #0x24000 @ irqbase - ldr \irqstat, [\base, #0x04] @ get interrupt status -#if defined (CONFIG_CPU_H7201) - ldr \tmp, =0x001fffff -#else - mvn \tmp, #0xc0000000 -#endif - and \irqstat, \irqstat, \tmp @ mask out unused ints - mov \irqnr, #0 - - mov \tmp, #0xff00 - orr \tmp, \tmp, #0xff - tst \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr #16 - tst \irqstat, #255 - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr #8 - tst \irqstat, #15 - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr #4 - tst \irqstat, #3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr #2 - tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tst \irqstat, #1 @ bit 0 should be set - .endm - - .macro irq_prio_table - .endm - -#else -#error hynix processor selection missmatch -#endif - diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/include/asm-arm/arch-h720x/h7201-regs.h deleted file mode 100644 index 49d4f6bd308..00000000000 --- a/include/asm-arm/arch-h720x/h7201-regs.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/h7201-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * (C) 2004 Sascha Hauer - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_VIRT (IO_VIRT + 0x50100) -#define SERIAL3_VIRT (IO_VIRT + 0x50200) - -/* - * PCMCIA - */ -#define PCMCIA0_ATT_BASE 0xe5000000 -#define PCMCIA0_ATT_SIZE 0x00200000 -#define PCMCIA0_ATT_START 0x20000000 -#define PCMCIA0_MEM_BASE 0xe5200000 -#define PCMCIA0_MEM_SIZE 0x00200000 -#define PCMCIA0_MEM_START 0x24000000 -#define PCMCIA0_IO_BASE 0xe5400000 -#define PCMCIA0_IO_SIZE 0x00200000 -#define PCMCIA0_IO_START 0x28000000 - -#define PCMCIA1_ATT_BASE 0xe5600000 -#define PCMCIA1_ATT_SIZE 0x00200000 -#define PCMCIA1_ATT_START 0x30000000 -#define PCMCIA1_MEM_BASE 0xe5800000 -#define PCMCIA1_MEM_SIZE 0x00200000 -#define PCMCIA1_MEM_START 0x34000000 -#define PCMCIA1_IO_BASE 0xe5a00000 -#define PCMCIA1_IO_SIZE 0x00200000 -#define PCMCIA1_IO_START 0x38000000 - -#define PRIME3C_BASE 0xf0050000 -#define PRIME3C_SIZE 0x00001000 -#define PRIME3C_START 0x10000000 - -/* VGA Controller */ -#define VGA_RAMBASE 0x50 -#define VGA_TIMING0 0x60 -#define VGA_TIMING1 0x64 -#define VGA_TIMING2 0x68 -#define VGA_TIMING3 0x6c - -#define LCD_CTRL_VGA_ENABLE 0x00000100 -#define LCD_CTRL_VGA_BPP_MASK 0x00000600 -#define LCD_CTRL_VGA_4BPP 0x00000000 -#define LCD_CTRL_VGA_8BPP 0x00000200 -#define LCD_CTRL_VGA_16BPP 0x00000300 -#define LCD_CTRL_SHARE_DMA 0x00000800 -#define LCD_CTRL_VDE 0x00100000 -#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */ -#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */ - -#define VGA_PALETTE_BASE (IO_VIRT + 0x10800) diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/include/asm-arm/arch-h720x/h7202-regs.h deleted file mode 100644 index 43d8ba8a601..00000000000 --- a/include/asm-arm/arch-h720x/h7202-regs.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/h7202-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * (C) 2004 Sascha Hauer - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_OFS 0x2d000 -#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS) -#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS) -#define SERIAL3_OFS 0x2e000 -#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS) -#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS) - -/* Matrix Keyboard Controller */ -#define KBD_VIRT (IO_VIRT + 0x22000) -#define KBD_KBCR 0x00 -#define KBD_KBSC 0x04 -#define KBD_KBTR 0x08 -#define KBD_KBVR0 0x0C -#define KBD_KBVR1 0x10 -#define KBD_KBSR 0x18 - -#define KBD_KBCR_SCANENABLE (1 << 7) -#define KBD_KBCR_NPOWERDOWN (1 << 2) -#define KBD_KBCR_CLKSEL_MASK (3) -#define KBD_KBCR_CLKSEL_PCLK2 0x0 -#define KBD_KBCR_CLKSEL_PCLK128 0x1 -#define KBD_KBCR_CLKSEL_PCLK256 0x2 -#define KBD_KBCR_CLKSEL_PCLK512 0x3 - -#define KBD_KBSR_INTR (1 << 0) -#define KBD_KBSR_WAKEUP (1 << 1) - -/* USB device controller */ - -#define USBD_BASE (IO_VIRT + 0x12000) -#define USBD_LENGTH 0x3C - -#define USBD_GCTRL 0x00 -#define USBD_EPCTRL 0x04 -#define USBD_INTMASK 0x08 -#define USBD_INTSTAT 0x0C -#define USBD_PWR 0x10 -#define USBD_DMARXTX 0x14 -#define USBD_DEVID 0x18 -#define USBD_DEVCLASS 0x1C -#define USBD_INTCLASS 0x20 -#define USBD_SETUP0 0x24 -#define USBD_SETUP1 0x28 -#define USBD_ENDP0RD 0x2C -#define USBD_ENDP0WT 0x30 -#define USBD_ENDP1RD 0x34 -#define USBD_ENDP2WT 0x38 - -/* PS/2 port */ -#define PSDATA 0x00 -#define PSSTAT 0x04 -#define PSSTAT_TXEMPTY (1<<0) -#define PSSTAT_TXBUSY (1<<1) -#define PSSTAT_RXFULL (1<<2) -#define PSSTAT_RXBUSY (1<<3) -#define PSSTAT_CLKIN (1<<4) -#define PSSTAT_DATAIN (1<<5) -#define PSSTAT_PARITY (1<<6) - -#define PSCONF 0x08 -#define PSCONF_ENABLE (1<<0) -#define PSCONF_TXINTEN (1<<2) -#define PSCONF_RXINTEN (1<<3) -#define PSCONF_FORCECLKLOW (1<<4) -#define PSCONF_FORCEDATLOW (1<<5) -#define PSCONF_LCE (1<<6) - -#define PSINTR 0x0C -#define PSINTR_TXINT (1<<0) -#define PSINTR_RXINT (1<<1) -#define PSINTR_PAR (1<<2) -#define PSINTR_RXTO (1<<3) -#define PSINTR_TXTO (1<<4) - -#define PSTDLO 0x10 /* clk low before start transmission */ -#define PSTPRI 0x14 /* PRI clock */ -#define PSTXMT 0x18 /* maximum transmission time */ -#define PSTREC 0x20 /* maximum receive time */ -#define PSPWDN 0x3c - -/* ADC converter */ -#define ADC_BASE (IO_VIRT + 0x29000) -#define ADC_CR 0x00 -#define ADC_TSCTRL 0x04 -#define ADC_BT_CTRL 0x08 -#define ADC_MC_CTRL 0x0C -#define ADC_STATUS 0x10 - -/* ADC control register bits */ -#define ADC_CR_PW_CTRL 0x80 -#define ADC_CR_DIRECTC 0x04 -#define ADC_CR_CONTIME_NO 0x00 -#define ADC_CR_CONTIME_2 0x04 -#define ADC_CR_CONTIME_4 0x08 -#define ADC_CR_CONTIME_ADE 0x0c -#define ADC_CR_LONGCALTIME 0x01 - -/* ADC touch panel register bits */ -#define ADC_TSCTRL_ENABLE 0x80 -#define ADC_TSCTRL_INTR 0x40 -#define ADC_TSCTRL_SWBYPSS 0x20 -#define ADC_TSCTRL_SWINVT 0x10 -#define ADC_TSCTRL_S400 0x03 -#define ADC_TSCTRL_S200 0x02 -#define ADC_TSCTRL_S100 0x01 -#define ADC_TSCTRL_S50 0x00 - -/* ADC Interrupt Status Register bits */ -#define ADC_STATUS_TS_BIT 0x80 -#define ADC_STATUS_MBT_BIT 0x40 -#define ADC_STATUS_BBT_BIT 0x20 -#define ADC_STATUS_MIC_BIT 0x10 - -/* Touch data registers */ -#define ADC_TS_X0X1 0x30 -#define ADC_TS_X2X3 0x34 -#define ADC_TS_Y0Y1 0x38 -#define ADC_TS_Y2Y3 0x3c -#define ADC_TS_X4X5 0x40 -#define ADC_TS_X6X7 0x44 -#define ADC_TS_Y4Y5 0x48 -#define ADC_TS_Y6Y7 0x50 - -/* battery data */ -#define ADC_MB_DATA 0x54 -#define ADC_BB_DATA 0x58 - -/* Sound data register */ -#define ADC_SD_DAT0 0x60 -#define ADC_SD_DAT1 0x64 -#define ADC_SD_DAT2 0x68 -#define ADC_SD_DAT3 0x6c -#define ADC_SD_DAT4 0x70 -#define ADC_SD_DAT5 0x74 -#define ADC_SD_DAT6 0x78 -#define ADC_SD_DAT7 0x7c diff --git a/include/asm-arm/arch-h720x/hardware.h b/include/asm-arm/arch-h720x/hardware.h deleted file mode 100644 index dfb778906a9..00000000000 --- a/include/asm-arm/arch-h720x/hardware.h +++ /dev/null @@ -1,192 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/hardware.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define IOCLK (3686400L) - -/* Onchip peripherals */ - -#define IO_VIRT 0xf0000000 /* IO peripherals */ -#define IO_PHYS 0x80000000 -#define IO_SIZE 0x00050000 - -#ifdef CONFIG_CPU_H7202 -#include "h7202-regs.h" -#elif defined CONFIG_CPU_H7201 -#include "h7201-regs.h" -#else -#error machine definition mismatch -#endif - -/* Macro to access the CPU IO */ -#define CPU_IO(x) (*(volatile u32*)(x)) - -/* Macro to access general purpose regs (base, offset) */ -#define CPU_REG(x,y) CPU_IO(x+y) - -/* Macro to access irq related regs */ -#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x) - -/* CPU registers */ -/* general purpose I/O */ -#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5)) -#define GPIO_A_VIRT (GPIO_VIRT(0)) -#define GPIO_B_VIRT (GPIO_VIRT(1)) -#define GPIO_C_VIRT (GPIO_VIRT(2)) -#define GPIO_D_VIRT (GPIO_VIRT(3)) -#define GPIO_E_VIRT (GPIO_VIRT(4)) -#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4) - -#define AMULSEL_USIN2 (1<<5) -#define AMULSEL_USOUT2 (1<<6) -#define AMULSEL_USIN3 (1<<13) -#define AMULSEL_USOUT3 (1<<14) -#define AMULSEL_IRDIN (1<<15) -#define AMULSEL_IRDOUT (1<<7) - -/* Register offsets general purpose I/O */ -#define GPIO_DATA 0x00 -#define GPIO_DIR 0x04 -#define GPIO_MASK 0x08 -#define GPIO_STAT 0x0C -#define GPIO_EDGE 0x10 -#define GPIO_CLR 0x14 -#define GPIO_POL 0x18 -#define GPIO_EN 0x1C - -/*interrupt controller */ -#define IRQC_VIRT (IO_VIRT + 0x24000) -/* register offset interrupt controller */ -#define IRQC_IER 0x00 -#define IRQC_ISR 0x04 - -/* timer unit */ -#define TIMER_VIRT (IO_VIRT + 0x25000) -/* Register offsets timer unit */ -#define TM0_PERIOD 0x00 -#define TM0_COUNT 0x08 -#define TM0_CTRL 0x10 -#define TM1_PERIOD 0x20 -#define TM1_COUNT 0x28 -#define TM1_CTRL 0x30 -#define TM2_PERIOD 0x40 -#define TM2_COUNT 0x48 -#define TM2_CTRL 0x50 -#define TIMER_TOPCTRL 0x60 -#define TIMER_TOPSTAT 0x64 -#define T64_COUNTL 0x80 -#define T64_COUNTH 0x84 -#define T64_CTRL 0x88 -#define T64_BASEL 0x94 -#define T64_BASEH 0x98 -/* Bitmaks timer unit TOPSTAT reg */ -#define TSTAT_T0INT 0x1 -#define TSTAT_T1INT 0x2 -#define TSTAT_T2INT 0x4 -#define TSTAT_T3INT 0x8 -/* Bit description of TMx_CTRL register */ -#define TM_START 0x1 -#define TM_REPEAT 0x2 -#define TM_RESET 0x4 -/* Bit description of TIMER_CTRL register */ -#define ENABLE_TM0_INTR 0x1 -#define ENABLE_TM1_INTR 0x2 -#define ENABLE_TM2_INTR 0x4 -#define TIMER_ENABLE_BIT 0x8 -#define ENABLE_TIMER64 0x10 -#define ENABLE_TIMER64_INT 0x20 - -/* PMU & PLL */ -#define PMU_BASE (IO_VIRT + 0x1000) -#define PMU_MODE 0x00 -#define PMU_STAT 0x20 -#define PMU_PLL_CTRL 0x28 - -/* PMU Mode bits */ -#define PMU_MODE_SLOW 0x00 -#define PMU_MODE_RUN 0x01 -#define PMU_MODE_IDLE 0x02 -#define PMU_MODE_SLEEP 0x03 -#define PMU_MODE_INIT 0x04 -#define PMU_MODE_DEEPSLEEP 0x07 -#define PMU_MODE_WAKEUP 0x08 - -/* PMU ... */ -#define PLL_2_EN 0x8000 -#define PLL_1_EN 0x4000 -#define PLL_3_MUTE 0x0080 - -/* Control bits for PMU/ PLL */ -#define PMU_WARMRESET 0x00010000 -#define PLL_CTRL_MASK23 0x000080ff - -/* LCD Controller */ -#define LCD_BASE (IO_VIRT + 0x10000) -#define LCD_CTRL 0x00 -#define LCD_STATUS 0x04 -#define LCD_STATUS_M 0x08 -#define LCD_INTERRUPT 0x0C -#define LCD_DBAR 0x10 -#define LCD_DCAR 0x14 -#define LCD_TIMING0 0x20 -#define LCD_TIMING1 0x24 -#define LCD_TIMING2 0x28 -#define LCD_TEST 0x40 - -/* LCD Control Bits */ -#define LCD_CTRL_LCD_ENABLE 0x00000001 -/* Bits per pixel */ -#define LCD_CTRL_LCD_BPP_MASK 0x00000006 -#define LCD_CTRL_LCD_4BPP 0x00000000 -#define LCD_CTRL_LCD_8BPP 0x00000002 -#define LCD_CTRL_LCD_16BPP 0x00000004 -#define LCD_CTRL_LCD_BW 0x00000008 -#define LCD_CTRL_LCD_TFT 0x00000010 -#define LCD_CTRL_BGR 0x00001000 -#define LCD_CTRL_LCD_VCOMP 0x00080000 -#define LCD_CTRL_LCD_MONO8 0x00200000 -#define LCD_CTRL_LCD_PWR 0x00400000 -#define LCD_CTRL_LCD_BLE 0x00800000 -#define LCD_CTRL_LDBUSEN 0x01000000 - -/* Palette */ -#define LCD_PALETTE_BASE (IO_VIRT + 0x10400) - -/* Serial ports */ -#define SERIAL0_OFS 0x20000 -#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS) -#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS) - -#define SERIAL1_OFS 0x21000 -#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS) -#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS) - -#define SERIAL_ENABLE 0x30 -#define SERIAL_ENABLE_EN (1<<0) - -/* General defines to pacify gcc */ -#define PCIO_BASE (0) /* for inb, outb and friends */ -#define PCIO_VIRT PCIO_BASE - -#define __ASM_ARCH_HARDWARE_INCMACH_H -#include "boards.h" -#undef __ASM_ARCH_HARDWARE_INCMACH_H - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h deleted file mode 100644 index 68814828c9a..00000000000 --- a/include/asm-arm/arch-h720x/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/io.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * - * 09-19-2001 JJKIM - * Created from linux/include/asm-arm/arch-l7200/io.h - * - * 03-27-2003 Robert Schwebel : - * re-unified header files for h720x - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-h720x/irqs.h b/include/asm-arm/arch-h720x/irqs.h deleted file mode 100644 index 8244413988b..00000000000 --- a/include/asm-arm/arch-h720x/irqs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/irqs.h - * - * Copyright (C) 2000 Jungjun Kim - * (C) 2003 Robert Schwebel - * (C) 2003 Thomas Gleixner - * - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#if defined (CONFIG_CPU_H7201) - -#define IRQ_PMU 0 /* 0x000001 */ -#define IRQ_DMA 1 /* 0x000002 */ -#define IRQ_LCD 2 /* 0x000004 */ -#define IRQ_VGA 3 /* 0x000008 */ -#define IRQ_PCMCIA1 4 /* 0x000010 */ -#define IRQ_PCMCIA2 5 /* 0x000020 */ -#define IRQ_AFE 6 /* 0x000040 */ -#define IRQ_AIC 7 /* 0x000080 */ -#define IRQ_KEYBOARD 8 /* 0x000100 */ -#define IRQ_TIMER0 9 /* 0x000200 */ -#define IRQ_RTC 10 /* 0x000400 */ -#define IRQ_SOUND 11 /* 0x000800 */ -#define IRQ_USB 12 /* 0x001000 */ -#define IRQ_IrDA 13 /* 0x002000 */ -#define IRQ_UART0 14 /* 0x004000 */ -#define IRQ_UART1 15 /* 0x008000 */ -#define IRQ_SPI 16 /* 0x010000 */ -#define IRQ_GPIOA 17 /* 0x020000 */ -#define IRQ_GPIOB 18 /* 0x040000 */ -#define IRQ_GPIOC 19 /* 0x080000 */ -#define IRQ_GPIOD 20 /* 0x100000 */ -#define IRQ_CommRX 21 /* 0x200000 */ -#define IRQ_CommTX 22 /* 0x400000 */ -#define IRQ_Soft 23 /* 0x800000 */ - -#define NR_GLBL_IRQS 24 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define NR_IRQS IRQ_CHAINED_GPIOD(32) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<> 5) -#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32)) - -#endif diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h deleted file mode 100644 index 53e923dba76..00000000000 --- a/include/asm-arm/arch-h720x/memory.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/memory.h - * - * Copyright (c) 2000 Jungjun Kim - * - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Page offset: - * ( 0xc0000000UL ) - */ -#define PHYS_OFFSET UL(0x40000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * There is something to do here later !, Mar 2000, Jungjun Kim - */ - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h deleted file mode 100644 index ddba93760b4..00000000000 --- a/include/asm-arm/arch-h720x/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/system.h - * - * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * linux/include/asm-arm/arch-h720x/system.h - * - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include - -static void arch_idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - - -static __inline__ void arch_reset(char mode) -{ - CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; -} - -#endif diff --git a/include/asm-arm/arch-h720x/timex.h b/include/asm-arm/arch-h720x/timex.h deleted file mode 100644 index 48a391c4080..00000000000 --- a/include/asm-arm/arch-h720x/timex.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/timex.h - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX -#define __ASM_ARCH_TIMEX - -#define CLOCK_TICK_RATE 3686400 - -#endif diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h deleted file mode 100644 index 61584cd5f42..00000000000 --- a/include/asm-arm/arch-h720x/uncompress.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/uncompress.h - * - * Copyright (C) 2001-2002 Jungjun Kim - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include - -#define LSR 0x14 -#define TEMPTY 0x40 - -static inline void putc(int c) -{ - volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000); - - /* wait until transmit buffer is empty */ - while((p[LSR] & TEMPTY) == 0x0) - barrier(); - - /* write next character */ - *p = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/include/asm-arm/arch-h720x/vmalloc.h deleted file mode 100644 index b4693cb821e..00000000000 --- a/include/asm-arm/arch-h720x/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/vmalloc.h - */ - -#ifndef __ARCH_ARM_VMALLOC_H -#define __ARCH_ARM_VMALLOC_H - -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - -#endif diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S deleted file mode 100644 index c611871643a..00000000000 --- a/include/asm-arm/arch-imx/debug-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/include/asm-arm/arch-imx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00000000 @ physical - movne \rx, #0xe0000000 @ virtual - orreq \rx, \rx, #0x00200000 @ physical - orr \rx, \rx, #0x00006000 @ UART1 offset - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h deleted file mode 100644 index 621ff2c730f..00000000000 --- a/include/asm-arm/arch-imx/dma.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} imx_dma_prio; - -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20+(x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S deleted file mode 100644 index 5dc0f307c1b..00000000000 --- a/include/asm-arm/arch-imx/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-imx/entry-macro.S - * - * Low-level IRQ helper macros for iMX-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#define AITC_NIVECSR 0x40 - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(IMX_AITC_BASE) - @ Load offset & priority of the highest priority - @ interrupt pending. - ldr \irqstat, [\base, #AITC_NIVECSR] - @ Shift off the priority leaving the offset or - @ "interrupt number", use arithmetic shift to - @ transform illegal source (0xffff) as -1 - mov \irqnr, \irqstat, asr #16 - adds \tmp, \irqnr, #1 - .endm diff --git a/include/asm-arm/arch-imx/gpio.h b/include/asm-arm/arch-imx/gpio.h deleted file mode 100644 index 486023263f3..00000000000 --- a/include/asm-arm/arch-imx/gpio.h +++ /dev/null @@ -1,102 +0,0 @@ -#ifndef _IMX_GPIO_H - -#include - -#define IMX_GPIO_ALLOC_MODE_NORMAL 0 -#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define IMX_GPIO_ALLOC_MODE_RELEASE 8 - -extern int imx_gpio_request(unsigned gpio, const char *label); - -extern void imx_gpio_free(unsigned gpio); - -extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -extern int imx_gpio_direction_input(unsigned gpio); - -extern int imx_gpio_direction_output(unsigned gpio, int value); - -extern void __imx_gpio_set_value(unsigned gpio, int value); - -static inline int imx_gpio_get_value(unsigned gpio) -{ - return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK)); -} - -static inline void imx_gpio_set_value_inline(unsigned gpio, int value) -{ - unsigned long flags; - - raw_local_irq_save(flags); - if(value) - DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK)); - else - DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK)); - raw_local_irq_restore(flags); -} - -static inline void imx_gpio_set_value(unsigned gpio, int value) -{ - if(__builtin_constant_p(gpio)) - imx_gpio_set_value_inline(gpio, value); - else - __imx_gpio_set_value(gpio, value); -} - -extern int imx_gpio_to_irq(unsigned gpio); - -extern int imx_irq_to_gpio(unsigned irq); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions - * to allow future extension of GPIO logic. - */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return imx_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - imx_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return imx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return imx_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return imx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); -} - -#include /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return imx_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return imx_irq_to_gpio(irq); -} - - -#endif diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h deleted file mode 100644 index 6542ca5e8c3..00000000000 --- a/include/asm-arm/arch-imx/hardware.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/hardware.h - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include "imx-regs.h" - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) - -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -#endif - -/* - * Memory map - */ - -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE 0xe0000000 - -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 -#define IMX_CS0_VIRT 0xe8000000 - -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 -#define IMX_CS1_VIRT 0xea000000 - -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 -#define IMX_CS2_VIRT 0xeb000000 - -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 -#define IMX_CS3_VIRT 0xec000000 - -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 -#define IMX_CS4_VIRT 0xed000000 - -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 -#define IMX_CS5_VIRT 0xee000000 - -#define IMX_FB_VIRT 0xF1000000 -#define IMX_FB_SIZE (256*1024) - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -#ifndef __ASSEMBLY__ -/* - * Handy routine to set GPIO functions - */ -extern void imx_gpio_mode( int gpio_mode ); - -#endif - -#define MAXIRQNUM 62 -#define MAXFIQNUM 62 -#define MAXSWINUM 62 - -/* - * Use SDRAM for memory - */ -#define MEM_SIZE 0x01000000 - -#ifdef CONFIG_ARCH_MX1ADS -#include "mx1ads.h" -#endif - -#endif diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h deleted file mode 100644 index 44d89c35539..00000000000 --- a/include/asm-arm/arch-imx/imx-dma.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -#ifndef __ASM_ARCH_IMX_DMA_H -#define __ASM_ARCH_IMX_DMA_H - -#define IMX_DMA_CHANNELS 11 - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @sgbc: counter of processed bytes in the actual read/written chunk - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void *data; - dmamode_t dma_mode; - struct scatterlist *sg; - unsigned int sgbc; - unsigned int sgcount; - unsigned int resbytes; - int dma_num; -}; - -extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -#define IMX_DMA_ERR_BURST 1 -#define IMX_DMA_ERR_REQUEST 2 -#define IMX_DMA_ERR_TRANSFER 4 -#define IMX_DMA_ERR_BUFFER 8 - -/* The type to distinguish channel numbers parameter from ordinal int type */ -typedef int imx_dmach_t; - -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, dmamode_t dmamode); - -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, dmamode_t dmamode); - -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -void imx_dma_enable(imx_dmach_t dma_ch); - -void imx_dma_disable(imx_dmach_t dma_ch); - -int imx_dma_request(imx_dmach_t dma_ch, const char *name); - -void imx_dma_free(imx_dmach_t dma_ch); - -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio); - - -#endif /* _ASM_ARCH_IMX_DMA_H */ diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h deleted file mode 100644 index fb9de273387..00000000000 --- a/include/asm-arm/arch-imx/imx-regs.h +++ /dev/null @@ -1,482 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * Interrupt controller - */ - -#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00) -#define INTCNTL_FIAD (1<<19) -#define INTCNTL_NIAD (1<<20) - -#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04) -#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08) -#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c) -#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10) -#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14) - -/* - * General purpose timers - */ -#define IMX_TCTL(x) __REG( 0x00 + (x)) -#define TCTL_SWR (1<<15) -#define TCTL_FRR (1<<8) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_OM (1<<5) -#define TCTL_IRQEN (1<<4) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_16 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) -#define TCTL_TEN (1<<0) - -#define IMX_TPRER(x) __REG( 0x04 + (x)) -#define IMX_TCMP(x) __REG( 0x08 + (x)) -#define IMX_TCR(x) __REG( 0x0C + (x)) -#define IMX_TCN(x) __REG( 0x10 + (x)) -#define IMX_TSTAT(x) __REG( 0x14 + (x)) -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -/* - * LCD Controller - */ - -#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00) - -#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04) -#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) -#define SIZE_YMAX(y) ( (y) & 0x1ff ) - -#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08) -#define VPW_VPW(x) ( (x) & 0x3ff ) - -#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C) -#define CPOS_CC1 (1<<31) -#define CPOS_CC0 (1<<30) -#define CPOS_OP (1<<28) -#define CPOS_CXP(x) (((x) & 3ff) << 16) -#define CPOS_CYP(y) ((y) & 0x1ff) - -#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10) -#define LCWHB_BK_EN (1<<31) -#define LCWHB_CW(w) (((w) & 0x1f) << 24) -#define LCWHB_CH(h) (((h) & 0x1f) << 16) -#define LCWHB_BD(x) ((x) & 0xff) - -#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14) -#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) -#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) -#define LCHCC_CUR_COL_B(b) ((b) & 0x1f) - -#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18) -#define PCR_TFT (1<<31) -#define PCR_COLOR (1<<30) -#define PCR_PBSIZ_1 (0<<28) -#define PCR_PBSIZ_2 (1<<28) -#define PCR_PBSIZ_4 (2<<28) -#define PCR_PBSIZ_8 (3<<28) -#define PCR_BPIX_1 (0<<25) -#define PCR_BPIX_2 (1<<25) -#define PCR_BPIX_4 (2<<25) -#define PCR_BPIX_8 (3<<25) -#define PCR_BPIX_12 (4<<25) -#define PCR_BPIX_16 (4<<25) -#define PCR_PIXPOL (1<<24) -#define PCR_FLMPOL (1<<23) -#define PCR_LPPOL (1<<22) -#define PCR_CLKPOL (1<<21) -#define PCR_OEPOL (1<<20) -#define PCR_SCLKIDLE (1<<19) -#define PCR_END_SEL (1<<18) -#define PCR_END_BYTE_SWAP (1<<17) -#define PCR_REV_VS (1<<16) -#define PCR_ACD_SEL (1<<15) -#define PCR_ACD(x) (((x) & 0x7f) << 8) -#define PCR_SCLK_SEL (1<<7) -#define PCR_SHARP (1<<6) -#define PCR_PCD(x) ((x) & 0x3f) - -#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C) -#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) -#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) -#define HCR_H_WAIT_2(x) ((x) & 0xff) - -#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20) -#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) -#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) -#define VCR_V_WAIT_2(x) ((x) & 0xff) - -#define LCDC_POS __REG(IMX_LCDC_BASE+0x24) -#define POS_POS(x) ((x) & 1f) - -#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28) -#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) -#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) -#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) -#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) -#define LSCR1_GRAY1(x) (((x) & 0xf)) - -#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C) -#define PWMR_CLS(x) (((x) & 0x1ff) << 16) -#define PWMR_LDMSK (1<<15) -#define PWMR_SCR1 (1<<10) -#define PWMR_SCR0 (1<<9) -#define PWMR_CC_EN (1<<8) -#define PWMR_PW(x) ((x) & 0xff) - -#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30) -#define DMACR_BURST (1<<31) -#define DMACR_HM(x) (((x) & 0xf) << 16) -#define DMACR_TM(x) ((x) &0xf) - -#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34) -#define RMCR_LCDC_EN (1<<1) -#define RMCR_SELF_REF (1<<0) - -#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38) -#define LCDICR_INT_SYN (1<<2) -#define LCDICR_INT_CON (1) - -#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40) -#define LCDISR_UDR_ERR (1<<3) -#define LCDISR_ERR_RES (1<<2) -#define LCDISR_EOF (1<<1) -#define LCDISR_BOF (1<<0) - -#endif // _IMX_REGS_H diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h deleted file mode 100644 index d54eb1d4802..00000000000 --- a/include/asm-arm/arch-imx/imx-uart.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -#endif diff --git a/include/asm-arm/arch-imx/imxfb.h b/include/asm-arm/arch-imx/imxfb.h deleted file mode 100644 index 3ed9ec8b9f0..00000000000 --- a/include/asm-arm/arch-imx/imxfb.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This structure describes the machine which we are running on. - */ -struct imxfb_mach_info { - u_long pixclock; - - u_short xres; - u_short yres; - - u_int nonstd; - u_char bpp; - u_char hsync_len; - u_char left_margin; - u_char right_margin; - - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; - - u_int cmap_greyscale:1, - cmap_inverse:1, - cmap_static:1, - unused:29; - - u_int pcr; - u_int pwmr; - u_int lscr1; - u_int dmacr; - - u_char * fixed_screen_cpu; - dma_addr_t fixed_screen_dma; - - void (*lcd_power)(int); - void (*backlight_power)(int); -}; -void set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info); diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h deleted file mode 100644 index 1a1d9bb8863..00000000000 --- a/include/asm-arm/arch-imx/io.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h deleted file mode 100644 index 238197cfb9d..00000000000 --- a/include/asm-arm/arch-imx/irqs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ARM_IRQS_H__ -#define __ARM_IRQS_H__ - -/* Use the imx definitions */ -#include - -/* - * IMX Interrupt numbers - * - */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 - -#define IMX_IRQS (64) - -/* note: the IMX has four gpio ports (A-D), but only - * the following pins are connected to the outside - * world: - * - * PORT A: bits 0-31 - * PORT B: bits 8-31 - * PORT C: bits 3-17 - * PORT D: bits 6-31 - * - * We map these interrupts straight on. As a result we have - * several holes in the interrupt mapping. We do this for two - * reasons: - * - mapping the interrupts without holes would get - * far more complicated - * - Motorola could well decide to bring some processor - * with more pins connected - */ - -#define IRQ_GPIOA(x) (IMX_IRQS + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5) - -#define NR_IRQS (IRQ_GPIOD(32) + 1) -#define IRQ_GPIO(x) -#endif diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h deleted file mode 100644 index 5ad90127915..00000000000 --- a/include/asm-arm/arch-imx/memory.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/memory.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H - -#define PHYS_OFFSET UL(0x08000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET) -#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-imx/mmc.h b/include/asm-arm/arch-imx/mmc.h deleted file mode 100644 index 4712f354dcc..00000000000 --- a/include/asm-arm/arch-imx/mmc.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include - -struct device; - -struct imxmmc_platform_data { - int (*card_present)(struct device *); - int (*get_ro)(struct device *); -}; - -extern void imx_set_mmc_info(struct imxmmc_platform_data *info); - -#endif diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h deleted file mode 100644 index d90fa4b49ce..00000000000 --- a/include/asm-arm/arch-imx/mx1ads.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/mx1ads.h - * - * Copyright (C) 2004 Robert Schwebel, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_MX1ADS_H -#define __ASM_ARCH_MX1ADS_H - -/* ------------------------------------------------------------------------ */ -/* Memory Map for the M9328MX1ADS (MX1ADS) Board */ -/* ------------------------------------------------------------------------ */ - -#define MX1ADS_FLASH_PHYS 0x10000000 -#define MX1ADS_FLASH_SIZE (16*1024*1024) - -#define IMX_FB_PHYS (0x0C000000 - 0x40000) - -#define CLK32 32000 - -#endif /* __ASM_ARCH_MX1ADS_H */ diff --git a/include/asm-arm/arch-imx/spi_imx.h b/include/asm-arm/arch-imx/spi_imx.h deleted file mode 100644 index 2165449e976..00000000000 --- a/include/asm-arm/arch-imx/spi_imx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * include/asm-arm/arch-imx/spi_imx.h - * - * Copyright (C) 2006 SWAPP - * Andrea Paterniani - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/include/asm-arm/arch-pxa/pxa2xx_spi.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef SPI_IMX_H_ -#define SPI_IMX_H_ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects - 1. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. - * @enable_dma: if true enables DMA driven transfers. -*/ -struct spi_imx_master { - u8 num_chipselect; - u8 enable_dma:1; -}; -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_chip - spi_board_info.controller_data for SPI - * slave devices, copied to spi_device.controller_data. - * @enable_loopback : used for test purpouse to internally connect RX and TX - * sections. - * @enable_dma : enables dma transfer (provided that controller driver has - * dma enabled too). - * @ins_ss_pulse : enable /SS pulse insertion between SPI burst. - * @bclk_wait : number of bclk waits between each bits_per_word SPI burst. - * @cs_control : function pointer to board-specific function to assert/deassert - * I/O port to control HW generation of devices chip-select. -*/ -struct spi_imx_chip { - u8 enable_loopback:1; - u8 enable_dma:1; - u8 ins_ss_pulse:1; - u16 bclk_wait:15; - void (*cs_control)(u32 control); -}; - -/* Chip-select state */ -#define SPI_CS_ASSERT (1 << 0) -#define SPI_CS_DEASSERT (1 << 1) -/*-------------------------------------------------------------------------*/ - - -#endif /* SPI_IMX_H_*/ diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h deleted file mode 100644 index c645fe9afb9..00000000000 --- a/include/asm-arm/arch-imx/system.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void -arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void -arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h deleted file mode 100644 index e22ba789546..00000000000 --- a/include/asm-arm/arch-imx/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/imx/timex.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (16000000) - -#endif diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h deleted file mode 100644 index da333f69136..00000000000 --- a/include/asm-arm/arch-imx/uncompress.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define UART1_BASE 0x206000 -#define UART2_BASE 0x207000 -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = UART1_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - serial_port = UART2_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - return; - } while(0); - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h deleted file mode 100644 index cb616912706..00000000000 --- a/include/asm-arm/arch-imx/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-integrator/bits.h b/include/asm-arm/arch-integrator/bits.h deleted file mode 100644 index 09b024e0496..00000000000 --- a/include/asm-arm/arch-integrator/bits.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Bit field definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 0x00000001 -#define BIT1 0x00000002 -#define BIT2 0x00000004 -#define BIT3 0x00000008 -#define BIT4 0x00000010 -#define BIT5 0x00000020 -#define BIT6 0x00000040 -#define BIT7 0x00000080 -#define BIT8 0x00000100 -#define BIT9 0x00000200 -#define BIT10 0x00000400 -#define BIT11 0x00000800 -#define BIT12 0x00001000 -#define BIT13 0x00002000 -#define BIT14 0x00004000 -#define BIT15 0x00008000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - -#endif - -/* END */ diff --git a/include/asm-arm/arch-integrator/cm.h b/include/asm-arm/arch-integrator/cm.h deleted file mode 100644 index 1ab353e2359..00000000000 --- a/include/asm-arm/arch-integrator/cm.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * update the core module control register. - */ -void cm_control(u32, u32); - -#define CM_CTRL_LED (1 << 0) -#define CM_CTRL_nMBDET (1 << 1) -#define CM_CTRL_REMAP (1 << 2) -#define CM_CTRL_RESET (1 << 3) - -/* - * Integrator/AP,PP2 specific - */ -#define CM_CTRL_HIGHVECTORS (1 << 4) -#define CM_CTRL_BIGENDIAN (1 << 5) -#define CM_CTRL_FASTBUS (1 << 6) -#define CM_CTRL_SYNC (1 << 7) - -/* - * ARM926/946/966 Integrator/CP specific - */ -#define CM_CTRL_LCDBIASEN (1 << 8) -#define CM_CTRL_LCDBIASUP (1 << 9) -#define CM_CTRL_LCDBIASDN (1 << 10) -#define CM_CTRL_LCDMUXSEL_MASK (7 << 11) -#define CM_CTRL_LCDMUXSEL_GENLCD (1 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_16BPP (2 << 11) -#define CM_CTRL_LCDMUXSEL_SHARPLCD (3 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_8421BPP (4 << 11) -#define CM_CTRL_LCDEN0 (1 << 14) -#define CM_CTRL_LCDEN1 (1 << 15) -#define CM_CTRL_STATIC1 (1 << 16) -#define CM_CTRL_STATIC2 (1 << 17) -#define CM_CTRL_STATIC (1 << 18) -#define CM_CTRL_n24BITEN (1 << 19) -#define CM_CTRL_EBIWP (1 << 20) diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S deleted file mode 100644 index 85b327c352d..00000000000 --- a/include/asm-arm/arch-integrator/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-integrator/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x16000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x16000000 >> 4 - .endm - -#include diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h deleted file mode 100644 index 83fd6bbaf9d..00000000000 --- a/include/asm-arm/arch-integrator/dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S deleted file mode 100644 index ef535a68bdd..00000000000 --- a/include/asm-arm/arch-integrator/entry-macro.S +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-arm/arch-integrator/entry-macro.S - * - * Low-level IRQ helper macros for Integrator platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -/* FIXME: should not be using soo many LDRs here */ - ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE) - mov \irqnr, #IRQ_PIC_START - ldr \irqstat, [\base, #IRQ_STATUS] @ get masked status - ldr \base, =IO_ADDRESS(INTEGRATOR_HDR_BASE) - teq \irqstat, #0 - ldreq \irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)] - moveq \irqnr, #IRQ_CIC_START - -1001: tst \irqstat, #15 - bne 1002f - add \irqnr, \irqnr, #4 - movs \irqstat, \irqstat, lsr #4 - bne 1001b -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - .endm - diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h deleted file mode 100644 index 6f0947bc500..00000000000 --- a/include/asm-arm/arch-integrator/hardware.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/hardware.h - * - * This file contains the hardware definitions of the Integrator. - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* - * Where in virtual memory the IO devices (timers, system controllers - * and so on) - */ -#define IO_BASE 0xF0000000 // VA of IO -#define IO_SIZE 0x0B000000 // How much? -#define IO_START INTEGRATOR_HDR_BASE // PA of IO - -#define PCIO_BASE PCI_IO_VADDR -#define PCIMEM_BASE PCI_MEMORY_VADDR - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x6000 -#define PCIBIOS_MIN_MEM 0x00100000 - -#endif - diff --git a/include/asm-arm/arch-integrator/impd1.h b/include/asm-arm/arch-integrator/impd1.h deleted file mode 100644 index d75de4b1423..00000000000 --- a/include/asm-arm/arch-integrator/impd1.h +++ /dev/null @@ -1,18 +0,0 @@ -#define IMPD1_OSC1 0x00 -#define IMPD1_OSC2 0x04 -#define IMPD1_LOCK 0x08 -#define IMPD1_LEDS 0x0c -#define IMPD1_INT 0x10 -#define IMPD1_SW 0x14 -#define IMPD1_CTRL 0x18 - -#define IMPD1_CTRL_DISP_LCD (0 << 0) -#define IMPD1_CTRL_DISP_VGA (1 << 0) -#define IMPD1_CTRL_DISP_LCD1 (2 << 0) -#define IMPD1_CTRL_DISP_ENABLE (1 << 2) -#define IMPD1_CTRL_DISP_MASK (7 << 0) - -struct device; - -void impd1_tweak_control(struct device *dev, u32 mask, u32 val); - diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h deleted file mode 100644 index c8f2175948b..00000000000 --- a/include/asm-arm/arch-integrator/io.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffff - -/* - * WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-integrator/irqs.h b/include/asm-arm/arch-integrator/irqs.h deleted file mode 100644 index ba7b3afee44..00000000000 --- a/include/asm-arm/arch-integrator/irqs.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupt numbers - */ -#define IRQ_PIC_START 0 -#define IRQ_SOFTINT 0 -#define IRQ_UARTINT0 1 -#define IRQ_UARTINT1 2 -#define IRQ_KMIINT0 3 -#define IRQ_KMIINT1 4 -#define IRQ_TIMERINT0 5 -#define IRQ_TIMERINT1 6 -#define IRQ_TIMERINT2 7 -#define IRQ_RTCINT 8 -#define IRQ_AP_EXPINT0 9 -#define IRQ_AP_EXPINT1 10 -#define IRQ_AP_EXPINT2 11 -#define IRQ_AP_EXPINT3 12 -#define IRQ_AP_PCIINT0 13 -#define IRQ_AP_PCIINT1 14 -#define IRQ_AP_PCIINT2 15 -#define IRQ_AP_PCIINT3 16 -#define IRQ_AP_V3INT 17 -#define IRQ_AP_CPINT0 18 -#define IRQ_AP_CPINT1 19 -#define IRQ_AP_LBUSTIMEOUT 20 -#define IRQ_AP_APCINT 21 -#define IRQ_CP_CLCDCINT 22 -#define IRQ_CP_MMCIINT0 23 -#define IRQ_CP_MMCIINT1 24 -#define IRQ_CP_AACIINT 25 -#define IRQ_CP_CPPLDINT 26 -#define IRQ_CP_ETHINT 27 -#define IRQ_CP_TSPENINT 28 -#define IRQ_PIC_END 31 - -#define IRQ_CIC_START 32 -#define IRQ_CM_SOFTINT 32 -#define IRQ_CM_COMMRX 33 -#define IRQ_CM_COMMTX 34 -#define IRQ_CIC_END 34 - -/* - * IntegratorCP only - */ -#define IRQ_SIC_START 35 -#define IRQ_SIC_CP_SOFTINT 35 -#define IRQ_SIC_CP_RI0 36 -#define IRQ_SIC_CP_RI1 37 -#define IRQ_SIC_CP_CARDIN 38 -#define IRQ_SIC_CP_LMINT0 39 -#define IRQ_SIC_CP_LMINT1 40 -#define IRQ_SIC_CP_LMINT2 41 -#define IRQ_SIC_CP_LMINT3 42 -#define IRQ_SIC_CP_LMINT4 43 -#define IRQ_SIC_CP_LMINT5 44 -#define IRQ_SIC_CP_LMINT6 45 -#define IRQ_SIC_CP_LMINT7 46 -#define IRQ_SIC_END 46 - -#define NR_IRQS 47 - diff --git a/include/asm-arm/arch-integrator/lm.h b/include/asm-arm/arch-integrator/lm.h deleted file mode 100644 index 28186b6f2c0..00000000000 --- a/include/asm-arm/arch-integrator/lm.h +++ /dev/null @@ -1,23 +0,0 @@ - -struct lm_device { - struct device dev; - struct resource resource; - unsigned int irq; - unsigned int id; -}; - -struct lm_driver { - struct device_driver drv; - int (*probe)(struct lm_device *); - void (*remove)(struct lm_device *); - int (*suspend)(struct lm_device *, pm_message_t); - int (*resume)(struct lm_device *); -}; - -int lm_driver_register(struct lm_driver *drv); -void lm_driver_unregister(struct lm_driver *drv); - -int lm_device_register(struct lm_device *dev); - -#define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev) -#define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d) diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h deleted file mode 100644 index 1ab56d783e7..00000000000 --- a/include/asm-arm/arch-integrator/memory.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) -#define BUS_OFFSET UL(0x80000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (x - PAGE_OFFSET + BUS_OFFSET) -#define __bus_to_virt(x) (x - BUS_OFFSET + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h deleted file mode 100644 index 83c4c1ceb41..00000000000 --- a/include/asm-arm/arch-integrator/platform.h +++ /dev/null @@ -1,469 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/************************************************************************** - * * Copyright © ARM Limited 1998. All rights reserved. - * ***********************************************************************/ -/* ************************************************************************ - * - * Integrator address map - * - * NOTE: This is a multi-hosted header file for use with uHAL and - * supported debuggers. - * - * $Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $ - * - * ***********************************************************************/ - -#ifndef __address_h -#define __address_h 1 - -/* ======================================================================== - * Integrator definitions - * ======================================================================== - * ------------------------------------------------------------------------ - * Memory definitions - * ------------------------------------------------------------------------ - * Integrator memory map - * - */ -#define INTEGRATOR_BOOT_ROM_LO 0x00000000 -#define INTEGRATOR_BOOT_ROM_HI 0x20000000 -#define INTEGRATOR_BOOT_ROM_BASE INTEGRATOR_BOOT_ROM_HI /* Normal position */ -#define INTEGRATOR_BOOT_ROM_SIZE SZ_512K - -/* - * New Core Modules have different amounts of SSRAM, the amount of SSRAM - * fitted can be found in HDR_STAT. - * - * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to - * the minimum amount of SSRAM fitted on any core module. - * - * New Core Modules also alias the SSRAM. - * - */ -#define INTEGRATOR_SSRAM_BASE 0x00000000 -#define INTEGRATOR_SSRAM_ALIAS_BASE 0x10800000 -#define INTEGRATOR_SSRAM_SIZE SZ_256K - -#define INTEGRATOR_FLASH_BASE 0x24000000 -#define INTEGRATOR_FLASH_SIZE SZ_32M - -#define INTEGRATOR_MBRD_SSRAM_BASE 0x28000000 -#define INTEGRATOR_MBRD_SSRAM_SIZE SZ_512K - -/* - * SDRAM is a SIMM therefore the size is not known. - * - */ -#define INTEGRATOR_SDRAM_BASE 0x00040000 - -#define INTEGRATOR_SDRAM_ALIAS_BASE 0x80000000 -#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 -#define INTEGRATOR_HDR1_SDRAM_BASE 0x90000000 -#define INTEGRATOR_HDR2_SDRAM_BASE 0xA0000000 -#define INTEGRATOR_HDR3_SDRAM_BASE 0xB0000000 - -/* - * Logic expansion modules - * - */ -#define INTEGRATOR_LOGIC_MODULES_BASE 0xC0000000 -#define INTEGRATOR_LOGIC_MODULE0_BASE 0xC0000000 -#define INTEGRATOR_LOGIC_MODULE1_BASE 0xD0000000 -#define INTEGRATOR_LOGIC_MODULE2_BASE 0xE0000000 -#define INTEGRATOR_LOGIC_MODULE3_BASE 0xF0000000 - -/* ------------------------------------------------------------------------ - * Integrator header card registers - * ------------------------------------------------------------------------ - * - */ -#define INTEGRATOR_HDR_ID_OFFSET 0x00 -#define INTEGRATOR_HDR_PROC_OFFSET 0x04 -#define INTEGRATOR_HDR_OSC_OFFSET 0x08 -#define INTEGRATOR_HDR_CTRL_OFFSET 0x0C -#define INTEGRATOR_HDR_STAT_OFFSET 0x10 -#define INTEGRATOR_HDR_LOCK_OFFSET 0x14 -#define INTEGRATOR_HDR_SDRAM_OFFSET 0x20 -#define INTEGRATOR_HDR_INIT_OFFSET 0x24 /* CM9x6 */ -#define INTEGRATOR_HDR_IC_OFFSET 0x40 -#define INTEGRATOR_HDR_SPDBASE_OFFSET 0x100 -#define INTEGRATOR_HDR_SPDTOP_OFFSET 0x200 - -#define INTEGRATOR_HDR_BASE 0x10000000 -#define INTEGRATOR_HDR_ID (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET) -#define INTEGRATOR_HDR_PROC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET) -#define INTEGRATOR_HDR_OSC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET) -#define INTEGRATOR_HDR_CTRL (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET) -#define INTEGRATOR_HDR_STAT (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET) -#define INTEGRATOR_HDR_LOCK (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET) -#define INTEGRATOR_HDR_SDRAM (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET) -#define INTEGRATOR_HDR_INIT (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET) -#define INTEGRATOR_HDR_IC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET) -#define INTEGRATOR_HDR_SPDBASE (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET) -#define INTEGRATOR_HDR_SPDTOP (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET) - -#define INTEGRATOR_HDR_CTRL_LED 0x01 -#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02 -#define INTEGRATOR_HDR_CTRL_REMAP 0x04 -#define INTEGRATOR_HDR_CTRL_RESET 0x08 -#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10 -#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN 0x20 -#define INTEGRATOR_HDR_CTRL_FASTBUS 0x40 -#define INTEGRATOR_HDR_CTRL_SYNC 0x80 - -#define INTEGRATOR_HDR_OSC_CORE_10MHz 0x102 -#define INTEGRATOR_HDR_OSC_CORE_15MHz 0x107 -#define INTEGRATOR_HDR_OSC_CORE_20MHz 0x10C -#define INTEGRATOR_HDR_OSC_CORE_25MHz 0x111 -#define INTEGRATOR_HDR_OSC_CORE_30MHz 0x116 -#define INTEGRATOR_HDR_OSC_CORE_35MHz 0x11B -#define INTEGRATOR_HDR_OSC_CORE_40MHz 0x120 -#define INTEGRATOR_HDR_OSC_CORE_45MHz 0x125 -#define INTEGRATOR_HDR_OSC_CORE_50MHz 0x12A -#define INTEGRATOR_HDR_OSC_CORE_55MHz 0x12F -#define INTEGRATOR_HDR_OSC_CORE_60MHz 0x134 -#define INTEGRATOR_HDR_OSC_CORE_65MHz 0x139 -#define INTEGRATOR_HDR_OSC_CORE_70MHz 0x13E -#define INTEGRATOR_HDR_OSC_CORE_75MHz 0x143 -#define INTEGRATOR_HDR_OSC_CORE_80MHz 0x148 -#define INTEGRATOR_HDR_OSC_CORE_85MHz 0x14D -#define INTEGRATOR_HDR_OSC_CORE_90MHz 0x152 -#define INTEGRATOR_HDR_OSC_CORE_95MHz 0x157 -#define INTEGRATOR_HDR_OSC_CORE_100MHz 0x15C -#define INTEGRATOR_HDR_OSC_CORE_105MHz 0x161 -#define INTEGRATOR_HDR_OSC_CORE_110MHz 0x166 -#define INTEGRATOR_HDR_OSC_CORE_115MHz 0x16B -#define INTEGRATOR_HDR_OSC_CORE_120MHz 0x170 -#define INTEGRATOR_HDR_OSC_CORE_125MHz 0x175 -#define INTEGRATOR_HDR_OSC_CORE_130MHz 0x17A -#define INTEGRATOR_HDR_OSC_CORE_135MHz 0x17F -#define INTEGRATOR_HDR_OSC_CORE_140MHz 0x184 -#define INTEGRATOR_HDR_OSC_CORE_145MHz 0x189 -#define INTEGRATOR_HDR_OSC_CORE_150MHz 0x18E -#define INTEGRATOR_HDR_OSC_CORE_155MHz 0x193 -#define INTEGRATOR_HDR_OSC_CORE_160MHz 0x198 -#define INTEGRATOR_HDR_OSC_CORE_MASK 0x7FF - -#define INTEGRATOR_HDR_OSC_MEM_10MHz 0x10C000 -#define INTEGRATOR_HDR_OSC_MEM_15MHz 0x116000 -#define INTEGRATOR_HDR_OSC_MEM_20MHz 0x120000 -#define INTEGRATOR_HDR_OSC_MEM_25MHz 0x12A000 -#define INTEGRATOR_HDR_OSC_MEM_30MHz 0x134000 -#define INTEGRATOR_HDR_OSC_MEM_33MHz 0x13A000 -#define INTEGRATOR_HDR_OSC_MEM_40MHz 0x148000 -#define INTEGRATOR_HDR_OSC_MEM_50MHz 0x15C000 -#define INTEGRATOR_HDR_OSC_MEM_60MHz 0x170000 -#define INTEGRATOR_HDR_OSC_MEM_66MHz 0x17C000 -#define INTEGRATOR_HDR_OSC_MEM_MASK 0x7FF000 - -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0 0x0 -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0 0x0800000 -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6 0x1000000 -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00 0x1800000 -#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK 0x1800000 - -#define INTEGRATOR_HDR_SDRAM_SPD_OK (1 << 5) - - -/* ------------------------------------------------------------------------ - * Integrator system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * System Controller - * - */ -#define INTEGRATOR_SC_ID_OFFSET 0x00 -#define INTEGRATOR_SC_OSC_OFFSET 0x04 -#define INTEGRATOR_SC_CTRLS_OFFSET 0x08 -#define INTEGRATOR_SC_CTRLC_OFFSET 0x0C -#define INTEGRATOR_SC_DEC_OFFSET 0x10 -#define INTEGRATOR_SC_ARB_OFFSET 0x14 -#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 -#define INTEGRATOR_SC_LOCK_OFFSET 0x1C - -#define INTEGRATOR_SC_BASE 0x11000000 -#define INTEGRATOR_SC_ID (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET) -#define INTEGRATOR_SC_OSC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET) -#define INTEGRATOR_SC_CTRLS (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET) -#define INTEGRATOR_SC_CTRLC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET) -#define INTEGRATOR_SC_DEC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET) -#define INTEGRATOR_SC_ARB (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET) -#define INTEGRATOR_SC_PCIENABLE (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET) -#define INTEGRATOR_SC_LOCK (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET) - -#define INTEGRATOR_SC_OSC_SYS_10MHz 0x20 -#define INTEGRATOR_SC_OSC_SYS_15MHz 0x34 -#define INTEGRATOR_SC_OSC_SYS_20MHz 0x48 -#define INTEGRATOR_SC_OSC_SYS_25MHz 0x5C -#define INTEGRATOR_SC_OSC_SYS_33MHz 0x7C -#define INTEGRATOR_SC_OSC_SYS_MASK 0xFF - -#define INTEGRATOR_SC_OSC_PCI_25MHz 0x100 -#define INTEGRATOR_SC_OSC_PCI_33MHz 0x0 -#define INTEGRATOR_SC_OSC_PCI_MASK 0x100 - -#define INTEGRATOR_SC_CTRL_SOFTRST (1 << 0) -#define INTEGRATOR_SC_CTRL_nFLVPPEN (1 << 1) -#define INTEGRATOR_SC_CTRL_nFLWP (1 << 2) -#define INTEGRATOR_SC_CTRL_URTS0 (1 << 4) -#define INTEGRATOR_SC_CTRL_UDTR0 (1 << 5) -#define INTEGRATOR_SC_CTRL_URTS1 (1 << 6) -#define INTEGRATOR_SC_CTRL_UDTR1 (1 << 7) - -/* - * External Bus Interface - * - */ -#define INTEGRATOR_EBI_BASE 0x12000000 - -#define INTEGRATOR_EBI_CSR0_OFFSET 0x00 -#define INTEGRATOR_EBI_CSR1_OFFSET 0x04 -#define INTEGRATOR_EBI_CSR2_OFFSET 0x08 -#define INTEGRATOR_EBI_CSR3_OFFSET 0x0C -#define INTEGRATOR_EBI_LOCK_OFFSET 0x20 - -#define INTEGRATOR_EBI_CSR0 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET) -#define INTEGRATOR_EBI_CSR1 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) -#define INTEGRATOR_EBI_CSR2 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET) -#define INTEGRATOR_EBI_CSR3 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET) -#define INTEGRATOR_EBI_LOCK (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) - -#define INTEGRATOR_EBI_8_BIT 0x00 -#define INTEGRATOR_EBI_16_BIT 0x01 -#define INTEGRATOR_EBI_32_BIT 0x02 -#define INTEGRATOR_EBI_WRITE_ENABLE 0x04 -#define INTEGRATOR_EBI_SYNC 0x08 -#define INTEGRATOR_EBI_WS_2 0x00 -#define INTEGRATOR_EBI_WS_3 0x10 -#define INTEGRATOR_EBI_WS_4 0x20 -#define INTEGRATOR_EBI_WS_5 0x30 -#define INTEGRATOR_EBI_WS_6 0x40 -#define INTEGRATOR_EBI_WS_7 0x50 -#define INTEGRATOR_EBI_WS_8 0x60 -#define INTEGRATOR_EBI_WS_9 0x70 -#define INTEGRATOR_EBI_WS_10 0x80 -#define INTEGRATOR_EBI_WS_11 0x90 -#define INTEGRATOR_EBI_WS_12 0xA0 -#define INTEGRATOR_EBI_WS_13 0xB0 -#define INTEGRATOR_EBI_WS_14 0xC0 -#define INTEGRATOR_EBI_WS_15 0xD0 -#define INTEGRATOR_EBI_WS_16 0xE0 -#define INTEGRATOR_EBI_WS_17 0xF0 - - -#define INTEGRATOR_CT_BASE 0x13000000 /* Counter/Timers */ -#define INTEGRATOR_IC_BASE 0x14000000 /* Interrupt Controller */ -#define INTEGRATOR_RTC_BASE 0x15000000 /* Real Time Clock */ -#define INTEGRATOR_UART0_BASE 0x16000000 /* UART 0 */ -#define INTEGRATOR_UART1_BASE 0x17000000 /* UART 1 */ -#define INTEGRATOR_KBD_BASE 0x18000000 /* Keyboard */ -#define INTEGRATOR_MOUSE_BASE 0x19000000 /* Mouse */ - -/* - * LED's & Switches - * - */ -#define INTEGRATOR_DBG_ALPHA_OFFSET 0x00 -#define INTEGRATOR_DBG_LEDS_OFFSET 0x04 -#define INTEGRATOR_DBG_SWITCH_OFFSET 0x08 - -#define INTEGRATOR_DBG_BASE 0x1A000000 -#define INTEGRATOR_DBG_ALPHA (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET) -#define INTEGRATOR_DBG_LEDS (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET) -#define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) - - -#if defined(CONFIG_ARCH_INTEGRATOR_AP) -#define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ -#elif defined(CONFIG_ARCH_INTEGRATOR_CP) -#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ -#endif - -/* ------------------------------------------------------------------------ - * KMI keyboard/mouse definitions - * ------------------------------------------------------------------------ - */ -/* PS2 Keyboard interface */ -#define KMI0_BASE INTEGRATOR_KBD_BASE - -/* PS2 Mouse interface */ -#define KMI1_BASE INTEGRATOR_MOUSE_BASE - -/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */ - -/* ------------------------------------------------------------------------ - * Where in the memory map does PCI live? - * ------------------------------------------------------------------------ - * This represents a fairly liberal usage of address space. Even though - * the V3 only has two windows (therefore we need to map stuff on the fly), - * we maintain the same addresses, even if they're not mapped. - * - */ -#define PHYS_PCI_MEM_BASE 0x40000000 /* 512M to xxx */ -/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? - */ -#define PHYS_PCI_IO_BASE 0x60000000 /* 16M to xxx */ -/* unused (128-16)M from B1000000-B7FFFFFF - */ -#define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ -/* unused ((128-16)M - 64K) from XXX - */ -#define PHYS_PCI_V3_BASE 0x62000000 - -#define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE - -/* 'export' these to UHAL */ -#define UHAL_PCI_IO PCI_IO_BASE -#define UHAL_PCI_MEM PCI_MEM_BASE -#define UHAL_PCI_ALLOC_IO_BASE 0x00004000 -#define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE -#define UHAL_PCI_MAX_SLOT 20 - -/* ======================================================================== - * Start of uHAL definitions - * ======================================================================== - */ - -/* ------------------------------------------------------------------------ - * Integrator Interrupt Controllers - * ------------------------------------------------------------------------ - * - * Offsets from interrupt controller base - * - * System Controller interrupt controller base is - * - * INTEGRATOR_IC_BASE + (header_number << 6) - * - * Core Module interrupt controller base is - * - * INTEGRATOR_HDR_IC - * - */ -#define IRQ_STATUS 0 -#define IRQ_RAW_STATUS 0x04 -#define IRQ_ENABLE 0x08 -#define IRQ_ENABLE_SET 0x08 -#define IRQ_ENABLE_CLEAR 0x0C - -#define INT_SOFT_SET 0x10 -#define INT_SOFT_CLEAR 0x14 - -#define FIQ_STATUS 0x20 -#define FIQ_RAW_STATUS 0x24 -#define FIQ_ENABLE 0x28 -#define FIQ_ENABLE_SET 0x28 -#define FIQ_ENABLE_CLEAR 0x2C - - -/* ------------------------------------------------------------------------ - * Interrupts - * ------------------------------------------------------------------------ - * - * - * Each Core Module has two interrupts controllers, one on the core module - * itself and one in the system controller on the motherboard. The - * READ_INT macro in target.s reads both interrupt controllers and returns - * a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller - * and bits 24 to 31 are from the core module. - * - * The following definitions relate to the bitmask returned by READ_INT. - * - */ - -/* ------------------------------------------------------------------------ - * LED's - The header LED is not accessible via the uHAL API - * ------------------------------------------------------------------------ - * - */ -#define GREEN_LED 0x01 -#define YELLOW_LED 0x02 -#define RED_LED 0x04 -#define GREEN_LED_2 0x08 -#define ALL_LEDS 0x0F - -#define LED_BANK INTEGRATOR_DBG_LEDS - -/* - * Memory definitions - run uHAL out of SSRAM. - * - */ -#define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE - -/* - * Application Flash - * - */ -#define FLASH_BASE INTEGRATOR_FLASH_BASE -#define FLASH_SIZE INTEGRATOR_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE INTEGRATOR_BOOT_ROM_HI -#define EPROM_SIZE INTEGRATOR_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE EPROM_BASE - -/* - * Timer definitions - * - * Only use timer 1 & 2 - * (both run at 24MHz and will need the clock divider set to 16). - * - * Timer 0 runs at bus frequency and therefore could vary and currently - * uHAL can't handle that. - * - */ - -#define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE -#define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) -#define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) - -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 24 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - -#define INTEGRATOR_CSR_BASE 0x10000000 -#define INTEGRATOR_CSR_SIZE 0x10000000 - -#endif - -/* END */ diff --git a/include/asm-arm/arch-integrator/system.h b/include/asm-arm/arch-integrator/system.h deleted file mode 100644 index 8ea442237d2..00000000000 --- a/include/asm-arm/arch-integrator/system.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - cm_control(CM_CTRL_RESET, CM_CTRL_RESET); -} - -#endif diff --git a/include/asm-arm/arch-integrator/timex.h b/include/asm-arm/arch-integrator/timex.h deleted file mode 100644 index 87a762818ba..00000000000 --- a/include/asm-arm/arch-integrator/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/timex.h - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h deleted file mode 100644 index f61825c4d90..00000000000 --- a/include/asm-arm/arch-integrator/uncompress.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define AMBA_UART_DR (*(volatile unsigned char *)0x16000000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0x16000008) -#define AMBA_UART_LCRM (*(volatile unsigned char *)0x1600000c) -#define AMBA_UART_LCRL (*(volatile unsigned char *)0x16000010) -#define AMBA_UART_CR (*(volatile unsigned char *)0x16000014) -#define AMBA_UART_FR (*(volatile unsigned char *)0x16000018) - -/* - * This does not append a newline - */ -static void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/include/asm-arm/arch-integrator/vmalloc.h deleted file mode 100644 index 170cccece52..00000000000 --- a/include/asm-arm/arch-integrator/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h deleted file mode 100644 index 26f60af6716..00000000000 --- a/include/asm-arm/arch-iop13xx/adma.h +++ /dev/null @@ -1,537 +0,0 @@ -/* - * Copyright(c) 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -#ifndef _ADMA_H -#define _ADMA_H -#include -#include -#include -#include - -#define ADMA_ACCR(chan) (chan->mmr_base + 0x0) -#define ADMA_ACSR(chan) (chan->mmr_base + 0x4) -#define ADMA_ADAR(chan) (chan->mmr_base + 0x8) -#define ADMA_IIPCR(chan) (chan->mmr_base + 0x18) -#define ADMA_IIPAR(chan) (chan->mmr_base + 0x1c) -#define ADMA_IIPUAR(chan) (chan->mmr_base + 0x20) -#define ADMA_ANDAR(chan) (chan->mmr_base + 0x24) -#define ADMA_ADCR(chan) (chan->mmr_base + 0x28) -#define ADMA_CARMD(chan) (chan->mmr_base + 0x2c) -#define ADMA_ABCR(chan) (chan->mmr_base + 0x30) -#define ADMA_DLADR(chan) (chan->mmr_base + 0x34) -#define ADMA_DUADR(chan) (chan->mmr_base + 0x38) -#define ADMA_SLAR(src, chan) (chan->mmr_base + (0x3c + (src << 3))) -#define ADMA_SUAR(src, chan) (chan->mmr_base + (0x40 + (src << 3))) - -struct iop13xx_adma_src { - u32 src_addr; - union { - u32 upper_src_addr; - struct { - unsigned int pq_upper_src_addr:24; - unsigned int pq_dmlt:8; - }; - }; -}; - -struct iop13xx_adma_desc_ctrl { - unsigned int int_en:1; - unsigned int xfer_dir:2; - unsigned int src_select:4; - unsigned int zero_result:1; - unsigned int block_fill_en:1; - unsigned int crc_gen_en:1; - unsigned int crc_xfer_dis:1; - unsigned int crc_seed_fetch_dis:1; - unsigned int status_write_back_en:1; - unsigned int endian_swap_en:1; - unsigned int reserved0:2; - unsigned int pq_update_xfer_en:1; - unsigned int dual_xor_en:1; - unsigned int pq_xfer_en:1; - unsigned int p_xfer_dis:1; - unsigned int reserved1:10; - unsigned int relax_order_en:1; - unsigned int no_snoop_en:1; -}; - -struct iop13xx_adma_byte_count { - unsigned int byte_count:24; - unsigned int host_if:3; - unsigned int reserved:2; - unsigned int zero_result_err_q:1; - unsigned int zero_result_err:1; - unsigned int tx_complete:1; -}; - -struct iop13xx_adma_desc_hw { - u32 next_desc; - union { - u32 desc_ctrl; - struct iop13xx_adma_desc_ctrl desc_ctrl_field; - }; - union { - u32 crc_addr; - u32 block_fill_data; - u32 q_dest_addr; - }; - union { - u32 byte_count; - struct iop13xx_adma_byte_count byte_count_field; - }; - union { - u32 dest_addr; - u32 p_dest_addr; - }; - union { - u32 upper_dest_addr; - u32 pq_upper_dest_addr; - }; - struct iop13xx_adma_src src[1]; -}; - -struct iop13xx_adma_desc_dual_xor { - u32 next_desc; - u32 desc_ctrl; - u32 reserved; - u32 byte_count; - u32 h_dest_addr; - u32 h_upper_dest_addr; - u32 src0_addr; - u32 upper_src0_addr; - u32 src1_addr; - u32 upper_src1_addr; - u32 h_src_addr; - u32 h_upper_src_addr; - u32 d_src_addr; - u32 d_upper_src_addr; - u32 d_dest_addr; - u32 d_upper_dest_addr; -}; - -struct iop13xx_adma_desc_pq_update { - u32 next_desc; - u32 desc_ctrl; - u32 reserved; - u32 byte_count; - u32 p_dest_addr; - u32 p_upper_dest_addr; - u32 src0_addr; - u32 upper_src0_addr; - u32 src1_addr; - u32 upper_src1_addr; - u32 p_src_addr; - u32 p_upper_src_addr; - u32 q_src_addr; - struct { - unsigned int q_upper_src_addr:24; - unsigned int q_dmlt:8; - }; - u32 q_dest_addr; - u32 q_upper_dest_addr; -}; - -static inline int iop_adma_get_max_xor(void) -{ - return 16; -} - -static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) -{ - return __raw_readl(ADMA_ADAR(chan)); -} - -static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan, - u32 next_desc_addr) -{ - __raw_writel(next_desc_addr, ADMA_ANDAR(chan)); -} - -#define ADMA_STATUS_BUSY (1 << 13) - -static inline char iop_chan_is_busy(struct iop_adma_chan *chan) -{ - if (__raw_readl(ADMA_ACSR(chan)) & - ADMA_STATUS_BUSY) - return 1; - else - return 0; -} - -static inline int -iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots) -{ - return 1; -} -#define iop_desc_is_aligned(x, y) 1 - -static inline int -iop_chan_memcpy_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s) - -static inline int -iop_chan_memset_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -static inline int -iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) -{ - static const char slot_count_table[] = { 1, 2, 2, 2, - 2, 3, 3, 3, - 3, 4, 4, 4, - 4, 5, 5, 5, - }; - *slots_per_op = slot_count_table[src_cnt - 1]; - return *slots_per_op; -} - -#define ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) -#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT -#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT -#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT -#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o) - -static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->dest_addr; -} - -static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->byte_count_field.byte_count; -} - -static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - int src_idx) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->src[src_idx].src_addr; -} - -static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->desc_ctrl_field.src_select + 1; -} - -static inline void -iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; -} - -static inline void -iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.block_fill_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; -} - -/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */ -static inline void -iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.src_select = src_cnt - 1; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; - -} -#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i) - -/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */ -static inline int -iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.src_select = src_cnt - 1; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.zero_result = 1; - u_desc_ctrl.field.status_write_back_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; - - return 1; -} - -static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - u32 byte_count) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->byte_count = byte_count; -} - -static inline void -iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) -{ - int slots_per_op = desc->slots_per_op; - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter; - int i = 0; - - if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - hw_desc->byte_count = len; - } else { - do { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - i += slots_per_op; - } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT); - - if (len) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = len; - } - } -} - - -static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - dma_addr_t addr) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->dest_addr = addr; - hw_desc->upper_dest_addr = 0; -} - -static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc, - dma_addr_t addr) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->src[0].src_addr = addr; - hw_desc->src[0].upper_src_addr = 0; -} - -static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc, - int src_idx, dma_addr_t addr) -{ - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter; - int i = 0; - - do { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->src[src_idx].src_addr = addr; - iter->src[src_idx].upper_src_addr = 0; - slot_cnt -= slots_per_op; - if (slot_cnt) { - i += slots_per_op; - addr += IOP_ADMA_XOR_MAX_BYTE_COUNT; - } - } while (slot_cnt); -} - -static inline void -iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - iop_desc_init_memcpy(desc, 1); - iop_desc_set_byte_count(desc, chan, 0); - iop_desc_set_dest_addr(desc, chan, 0); - iop_desc_set_memcpy_src_addr(desc, 0); -} - -#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr - -static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, - u32 next_desc_addr) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - BUG_ON(hw_desc->next_desc); - hw_desc->next_desc = next_desc_addr; -} - -static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->next_desc; -} - -static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->next_desc = 0; -} - -static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, - u32 val) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->block_fill_data = val; -} - -static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; - struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field; - - BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result)); - - if (desc_ctrl.pq_xfer_en) - return byte_count.zero_result_err_q; - else - return byte_count.zero_result_err; -} - -static inline void iop_chan_append(struct iop_adma_chan *chan) -{ - u32 adma_accr; - - adma_accr = __raw_readl(ADMA_ACCR(chan)); - adma_accr |= 0x2; - __raw_writel(adma_accr, ADMA_ACCR(chan)); -} - -static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) -{ - return __raw_readl(ADMA_ACSR(chan)); -} - -static inline void iop_chan_disable(struct iop_adma_chan *chan) -{ - u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan)); - adma_chan_ctrl &= ~0x1; - __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan)); -} - -static inline void iop_chan_enable(struct iop_adma_chan *chan) -{ - u32 adma_chan_ctrl; - - adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan)); - adma_chan_ctrl |= 0x1; - __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan)); -} - -static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(ADMA_ACSR(chan)); - status &= (1 << 12); - __raw_writel(status, ADMA_ACSR(chan)); -} - -static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(ADMA_ACSR(chan)); - status &= (1 << 11); - __raw_writel(status, ADMA_ACSR(chan)); -} - -static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(ADMA_ACSR(chan)); - status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3); - __raw_writel(status, ADMA_ACSR(chan)); -} - -static inline int -iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(9, &status); -} - -static inline int -iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(5, &status); -} - -static inline int -iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(4, &status); -} - -static inline int -iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(3, &status); -} - -static inline int -iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -#endif /* _ADMA_H */ diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S deleted file mode 100644 index 788b4e386c1..00000000000 --- a/include/asm-arm/arch-iop13xx/debug-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-iop13xx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - orreq \rx, \rx, #0x00d80000 - movne \rx, #0xfe000000 @ virtual - orrne \rx, \rx, #0x00e80000 - orr \rx, \rx, #0x00002300 - orr \rx, \rx, #0x00000040 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h deleted file mode 100644 index d79846fbb39..00000000000 --- a/include/asm-arm/arch-iop13xx/dma.h +++ /dev/null @@ -1,3 +0,0 @@ -#ifndef _IOP13XX_DMA_H -#define _IOP13XX_DMA_H -#endif diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/include/asm-arm/arch-iop13xx/entry-macro.S deleted file mode 100644 index a624a7870c6..00000000000 --- a/include/asm-arm/arch-iop13xx/entry-macro.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * iop13xx low level irq macros - * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mrc p15, 0, \tmp, c15, c1, 0 - orr \tmp, \tmp, #(1 << 6) - mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access - .endm - - /* - * Note: a 1-cycle window exists where iintvec will return the value - * of iintbase, so we explicitly check for "bad zeros" - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p6, 0, \irqnr, c3, c2, 0 @ Read IINTVEC - cmp \irqnr, #0 - mrceq p6, 0, \irqnr, c3, c2, 0 @ Re-read on potentially bad zero - adds \irqstat, \irqnr, #1 @ Check for 0xffffffff - movne \irqnr, \irqnr, lsr #2 @ Convert to irqnr - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - mrc p15, 0, \tmp1, c15, c1, 0 - ands \tmp2, \tmp1, #(1 << 6) - bicne \tmp1, \tmp1, #(1 << 6) - mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access - .endm diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/include/asm-arm/arch-iop13xx/hardware.h deleted file mode 100644 index 8e1d5628984..00000000000 --- a/include/asm-arm/arch-iop13xx/hardware.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H -#include - -#define pcibios_assign_all_busses() 1 - -#ifndef __ASSEMBLY__ -extern unsigned long iop13xx_pcibios_min_io; -extern unsigned long iop13xx_pcibios_min_mem; -extern u16 iop13xx_dev_id(void); -extern void iop13xx_set_atu_mmr_bases(void); -#endif - -#define PCIBIOS_MIN_IO (iop13xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop13xx_pcibios_min_mem) - -/* - * Generic chipset bits - * - */ -#include "iop13xx.h" - -/* - * Board specific bits - */ -#include "iq81340.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h deleted file mode 100644 index a6e0f9e6ddc..00000000000 --- a/include/asm-arm/arch-iop13xx/io.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * iop13xx custom ioremap implementation - * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __iop13xx_io(a) -#define __mem_pci(a) (a) -#define __mem_isa(a) (a) - -extern void __iomem * __iop13xx_io(unsigned long io_addr); -extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop13xx_iounmap(void __iomem *addr); - -extern u32 iop13xx_atue_mem_base; -extern u32 iop13xx_atux_mem_base; -extern size_t iop13xx_atue_mem_size; -extern size_t iop13xx_atux_mem_size; - -#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop13xx_iounmap(a) - -#endif diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h deleted file mode 100644 index 52b7fab7ef6..00000000000 --- a/include/asm-arm/arch-iop13xx/iop13xx.h +++ /dev/null @@ -1,526 +0,0 @@ -#ifndef _IOP13XX_HW_H_ -#define _IOP13XX_HW_H_ - -#ifndef __ASSEMBLY__ -/* The ATU offsets can change based on the strapping */ -extern u32 iop13xx_atux_pmmr_offset; -extern u32 iop13xx_atue_pmmr_offset; -void iop13xx_init_irq(void); -void iop13xx_map_io(void); -void iop13xx_platform_init(void); -void iop13xx_add_tpmi_devices(void); -void iop13xx_init_irq(void); - -/* CPUID CP6 R0 Page 0 */ -static inline int iop13xx_cpu_id(void) -{ - int id; - asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id)); - return id; -} - -/* WDTCR CP6 R7 Page 9 */ -static inline u32 read_wdtcr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val)); - return val; -} -static inline void write_wdtcr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val)); -} - -/* WDTSR CP6 R8 Page 9 */ -static inline u32 read_wdtsr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val)); - return val; -} -static inline void write_wdtsr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val)); -} - -/* RCSR - Reset Cause Status Register */ -static inline u32 read_rcsr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val)); - return val; -} - -extern unsigned long get_iop_tick_rate(void); -#endif - -/* - * IOP13XX I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP13XX_MAX_RAM_SIZE 0x80000000UL /* 2GB */ -#define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE - -/* PCI MAP - * bus range cpu phys cpu virt note - * 0x0000.0000 + 2GB (n/a) (n/a) inbound, 1:1 mapping with Physical RAM - * 0x8000.0000 + 928M 0x1.8000.0000 (ioremap) PCIX outbound memory window - * 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window - * - * IO MAP - * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window - * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window - */ -#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL -#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL -#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL -#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIX_LOWER_IO_PA\ - - IOP13XX_PCIX_LOWER_IO_VA)) - -#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL -#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL -#define IOP13XX_PCIX_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET) -#define IOP13XX_PCIX_LOWER_MEM_PA (IOP13XX_PCIX_MEM_PHYS_OFFSET +\ - IOP13XX_PCIX_LOWER_MEM_BA) -#define IOP13XX_PCIX_UPPER_MEM_PA (IOP13XX_PCIX_LOWER_MEM_PA +\ - IOP13XX_PCIX_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_UPPER_MEM_BA (IOP13XX_PCIX_LOWER_MEM_BA +\ - IOP13XX_PCIX_MEM_WINDOW_SIZE - 1) - -#define IOP13XX_PCIX_MEM_COOKIE 0x80000000UL -#define IOP13XX_PCIX_LOWER_MEM_RA IOP13XX_PCIX_MEM_COOKIE -#define IOP13XX_PCIX_UPPER_MEM_RA (IOP13XX_PCIX_LOWER_MEM_RA +\ - IOP13XX_PCIX_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_MEM_OFFSET (IOP13XX_PCIX_MEM_COOKIE -\ - IOP13XX_PCIX_LOWER_MEM_BA) - -/* PCI-E ranges */ -#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL -#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL -#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL -#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIE_LOWER_IO_PA\ - - IOP13XX_PCIE_LOWER_IO_VA)) - -#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL -#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL -#define IOP13XX_PCIE_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET) -#define IOP13XX_PCIE_LOWER_MEM_PA (IOP13XX_PCIE_MEM_PHYS_OFFSET +\ - IOP13XX_PCIE_LOWER_MEM_BA) -#define IOP13XX_PCIE_UPPER_MEM_PA (IOP13XX_PCIE_LOWER_MEM_PA +\ - IOP13XX_PCIE_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_MEM_BA (IOP13XX_PCIE_LOWER_MEM_BA +\ - IOP13XX_PCIE_MEM_WINDOW_SIZE - 1) - -/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */ -#define IOP13XX_PCIE_MEM_COOKIE 0xc0000000UL -#define IOP13XX_PCIE_LOWER_MEM_RA IOP13XX_PCIE_MEM_COOKIE -#define IOP13XX_PCIE_UPPER_MEM_RA (IOP13XX_PCIE_LOWER_MEM_RA +\ - IOP13XX_PCIE_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_MEM_OFFSET (IOP13XX_PCIE_MEM_COOKIE -\ - IOP13XX_PCIE_LOWER_MEM_BA) - -/* PBI Ranges */ -#define IOP13XX_PBI_LOWER_MEM_PA 0xf0000000UL -#define IOP13XX_PBI_MEM_WINDOW_SIZE 0x04000000UL -#define IOP13XX_PBI_MEM_COOKIE 0xfa000000UL -#define IOP13XX_PBI_LOWER_MEM_RA IOP13XX_PBI_MEM_COOKIE -#define IOP13XX_PBI_UPPER_MEM_RA (IOP13XX_PBI_LOWER_MEM_RA +\ - IOP13XX_PBI_MEM_WINDOW_SIZE - 1) - -/* - * IOP13XX chipset registers - */ -#define IOP13XX_PMMR_PHYS_MEM_BASE 0xffd80000UL /* PMMR phys. address */ -#define IOP13XX_PMMR_VIRT_MEM_BASE 0xfee80000UL /* PMMR phys. address */ -#define IOP13XX_PMMR_MEM_WINDOW_SIZE 0x80000 -#define IOP13XX_PMMR_UPPER_MEM_VA (IOP13XX_PMMR_VIRT_MEM_BASE +\ - IOP13XX_PMMR_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PMMR_UPPER_MEM_PA (IOP13XX_PMMR_PHYS_MEM_BASE +\ - IOP13XX_PMMR_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (u32) ((u32) addr +\ - (IOP13XX_PMMR_PHYS_MEM_BASE\ - - IOP13XX_PMMR_VIRT_MEM_BASE)) -#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PMMR_PHYS_MEM_BASE\ - - IOP13XX_PMMR_VIRT_MEM_BASE)) -#define IOP13XX_REG_ADDR32(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR16(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR8(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR32_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR16_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR8_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg)) -#define IOP13XX_PMMR_SIZE 0x00080000 - -/*=================== Defines for Platform Devices =====================*/ -#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300) -#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340) -#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300) -#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340) - -#define IOP13XX_I2C0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500) -#define IOP13XX_I2C1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520) -#define IOP13XX_I2C2_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540) -#define IOP13XX_I2C0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500) -#define IOP13XX_I2C1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520) -#define IOP13XX_I2C2_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540) - -/* ATU selection flags */ -/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */ -#define IOP13XX_INIT_ATU_DEFAULT (0) -#define IOP13XX_INIT_ATU_ATUX (1 << 0) -#define IOP13XX_INIT_ATU_ATUE (1 << 1) -#define IOP13XX_INIT_ATU_NONE (1 << 2) - -/* UART selection flags */ -/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */ -#define IOP13XX_INIT_UART_DEFAULT (0) -#define IOP13XX_INIT_UART_0 (1 << 0) -#define IOP13XX_INIT_UART_1 (1 << 1) - -/* I2C selection flags */ -/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */ -#define IOP13XX_INIT_I2C_DEFAULT (0) -#define IOP13XX_INIT_I2C_0 (1 << 0) -#define IOP13XX_INIT_I2C_1 (1 << 1) -#define IOP13XX_INIT_I2C_2 (1 << 2) - -/* ADMA selection flags */ -/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */ -#define IOP13XX_INIT_ADMA_DEFAULT (0) -#define IOP13XX_INIT_ADMA_0 (1 << 0) -#define IOP13XX_INIT_ADMA_1 (1 << 1) -#define IOP13XX_INIT_ADMA_2 (1 << 2) - -/* Platform devices */ -#define IQ81340_NUM_UART 2 -#define IQ81340_NUM_I2C 3 -#define IQ81340_NUM_PHYS_MAP_FLASH 1 -#define IQ81340_NUM_ADMA 3 -#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \ - IQ81340_NUM_I2C + \ - IQ81340_NUM_PHYS_MAP_FLASH + \ - IQ81340_NUM_ADMA) - -/*========================== PMMR offsets for key registers ============*/ -#define IOP13XX_ATU0_PMMR_OFFSET 0x00048000 -#define IOP13XX_ATU1_PMMR_OFFSET 0x0004c000 -#define IOP13XX_ATU2_PMMR_OFFSET 0x0004d000 -#define IOP13XX_ADMA0_PMMR_OFFSET 0x00000000 -#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200 -#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400 -#define IOP13XX_PBI_PMMR_OFFSET 0x00001580 -#define IOP13XX_MU_PMMR_OFFSET 0x00004000 -#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188 -#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188) - -#define IOP13XX_ESSR0_IFACE_MASK 0x00004000 /* Interface PCI-X / PCI-E */ -#define IOP13XX_CONTROLLER_ONLY (1 << 14) -#define IOP13XX_INTERFACE_SEL_PCIX (1 << 15) - -#define IOP13XX_PMON_PMMR_OFFSET 0x0001A000 -#define IOP13XX_PMON_BASE (IOP13XX_PMMR_VIRT_MEM_BASE +\ - IOP13XX_PMON_PMMR_OFFSET) -#define IOP13XX_PMON_PHYSBASE (IOP13XX_PMMR_PHYS_MEM_BASE +\ - IOP13XX_PMON_PMMR_OFFSET) - -#define IOP13XX_PMON_CMD0 (IOP13XX_PMON_BASE + 0x0) -#define IOP13XX_PMON_EVR0 (IOP13XX_PMON_BASE + 0x4) -#define IOP13XX_PMON_STS0 (IOP13XX_PMON_BASE + 0x8) -#define IOP13XX_PMON_DATA0 (IOP13XX_PMON_BASE + 0xC) - -#define IOP13XX_PMON_CMD3 (IOP13XX_PMON_BASE + 0x30) -#define IOP13XX_PMON_EVR3 (IOP13XX_PMON_BASE + 0x34) -#define IOP13XX_PMON_STS3 (IOP13XX_PMON_BASE + 0x38) -#define IOP13XX_PMON_DATA3 (IOP13XX_PMON_BASE + 0x3C) - -#define IOP13XX_PMON_CMD7 (IOP13XX_PMON_BASE + 0x70) -#define IOP13XX_PMON_EVR7 (IOP13XX_PMON_BASE + 0x74) -#define IOP13XX_PMON_STS7 (IOP13XX_PMON_BASE + 0x78) -#define IOP13XX_PMON_DATA7 (IOP13XX_PMON_BASE + 0x7C) - -#define IOP13XX_PMONEN (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040) -#define IOP13XX_PMONSTAT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044) - -/*================================ATU===================================*/ -#define IOP13XX_ATUX_OFFSET(ofs) IOP13XX_REG_ADDR32(\ - iop13xx_atux_pmmr_offset + (ofs)) - -#define IOP13XX_ATUX_DID IOP13XX_REG_ADDR16(\ - iop13xx_atux_pmmr_offset + 0x2) - -#define IOP13XX_ATUX_ATUCMD IOP13XX_REG_ADDR16(\ - iop13xx_atux_pmmr_offset + 0x4) -#define IOP13XX_ATUX_ATUSR IOP13XX_REG_ADDR16(\ - iop13xx_atux_pmmr_offset + 0x6) - -#define IOP13XX_ATUX_IABAR0 IOP13XX_ATUX_OFFSET(0x10) -#define IOP13XX_ATUX_IAUBAR0 IOP13XX_ATUX_OFFSET(0x14) -#define IOP13XX_ATUX_IABAR1 IOP13XX_ATUX_OFFSET(0x18) -#define IOP13XX_ATUX_IAUBAR1 IOP13XX_ATUX_OFFSET(0x1c) -#define IOP13XX_ATUX_IABAR2 IOP13XX_ATUX_OFFSET(0x20) -#define IOP13XX_ATUX_IAUBAR2 IOP13XX_ATUX_OFFSET(0x24) -#define IOP13XX_ATUX_IALR0 IOP13XX_ATUX_OFFSET(0x40) -#define IOP13XX_ATUX_IATVR0 IOP13XX_ATUX_OFFSET(0x44) -#define IOP13XX_ATUX_IAUTVR0 IOP13XX_ATUX_OFFSET(0x48) -#define IOP13XX_ATUX_IALR1 IOP13XX_ATUX_OFFSET(0x4c) -#define IOP13XX_ATUX_IATVR1 IOP13XX_ATUX_OFFSET(0x50) -#define IOP13XX_ATUX_IAUTVR1 IOP13XX_ATUX_OFFSET(0x54) -#define IOP13XX_ATUX_IALR2 IOP13XX_ATUX_OFFSET(0x58) -#define IOP13XX_ATUX_IATVR2 IOP13XX_ATUX_OFFSET(0x5c) -#define IOP13XX_ATUX_IAUTVR2 IOP13XX_ATUX_OFFSET(0x60) -#define IOP13XX_ATUX_ATUCR IOP13XX_ATUX_OFFSET(0x70) -#define IOP13XX_ATUX_PCSR IOP13XX_ATUX_OFFSET(0x74) -#define IOP13XX_ATUX_ATUISR IOP13XX_ATUX_OFFSET(0x78) -#define IOP13XX_ATUX_PCIXSR IOP13XX_ATUX_OFFSET(0xD4) -#define IOP13XX_ATUX_IABAR3 IOP13XX_ATUX_OFFSET(0x200) -#define IOP13XX_ATUX_IAUBAR3 IOP13XX_ATUX_OFFSET(0x204) -#define IOP13XX_ATUX_IALR3 IOP13XX_ATUX_OFFSET(0x208) -#define IOP13XX_ATUX_IATVR3 IOP13XX_ATUX_OFFSET(0x20c) -#define IOP13XX_ATUX_IAUTVR3 IOP13XX_ATUX_OFFSET(0x210) - -#define IOP13XX_ATUX_OIOBAR IOP13XX_ATUX_OFFSET(0x300) -#define IOP13XX_ATUX_OIOWTVR IOP13XX_ATUX_OFFSET(0x304) -#define IOP13XX_ATUX_OUMBAR0 IOP13XX_ATUX_OFFSET(0x308) -#define IOP13XX_ATUX_OUMWTVR0 IOP13XX_ATUX_OFFSET(0x30c) -#define IOP13XX_ATUX_OUMBAR1 IOP13XX_ATUX_OFFSET(0x310) -#define IOP13XX_ATUX_OUMWTVR1 IOP13XX_ATUX_OFFSET(0x314) -#define IOP13XX_ATUX_OUMBAR2 IOP13XX_ATUX_OFFSET(0x318) -#define IOP13XX_ATUX_OUMWTVR2 IOP13XX_ATUX_OFFSET(0x31c) -#define IOP13XX_ATUX_OUMBAR3 IOP13XX_ATUX_OFFSET(0x320) -#define IOP13XX_ATUX_OUMWTVR3 IOP13XX_ATUX_OFFSET(0x324) -#define IOP13XX_ATUX_OUDMABAR IOP13XX_ATUX_OFFSET(0x328) -#define IOP13XX_ATUX_OUMSIBAR IOP13XX_ATUX_OFFSET(0x32c) -#define IOP13XX_ATUX_OCCAR IOP13XX_ATUX_OFFSET(0x330) -#define IOP13XX_ATUX_OCCDR IOP13XX_ATUX_OFFSET(0x334) - -#define IOP13XX_ATUX_ATUCR_OUT_EN (1 << 1) -#define IOP13XX_ATUX_PCSR_CENTRAL_RES (1 << 25) -#define IOP13XX_ATUX_PCSR_P_RSTOUT (1 << 21) -#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY (1 << 15) -#define IOP13XX_ATUX_PCSR_IN_Q_BUSY (1 << 14) -#define IOP13XX_ATUX_PCSR_FREQ_OFFSET (16) - -#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR (1 << 18) -#define IOP13XX_ATUX_STAT_VPD_ADDR (1 << 17) -#define IOP13XX_ATUX_STAT_INT_PAR_ERR (1 << 16) -#define IOP13XX_ATUX_STAT_CFG_WRITE (1 << 15) -#define IOP13XX_ATUX_STAT_ERR_COR (1 << 14) -#define IOP13XX_ATUX_STAT_TX_SCEM (1 << 13) -#define IOP13XX_ATUX_STAT_REC_SCEM (1 << 12) -#define IOP13XX_ATUX_STAT_POWER_TRAN (1 << 11) -#define IOP13XX_ATUX_STAT_TX_SERR (1 << 10) -#define IOP13XX_ATUX_STAT_DET_PAR_ERR (1 << 9 ) -#define IOP13XX_ATUX_STAT_BIST (1 << 8 ) -#define IOP13XX_ATUX_STAT_INT_REC_MABORT (1 << 7 ) -#define IOP13XX_ATUX_STAT_REC_SERR (1 << 4 ) -#define IOP13XX_ATUX_STAT_EXT_REC_MABORT (1 << 3 ) -#define IOP13XX_ATUX_STAT_EXT_REC_TABORT (1 << 2 ) -#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT (1 << 1 ) -#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR (1 << 0 ) - -#define IOP13XX_ATUX_PCIXSR_BUS_NUM (8) -#define IOP13XX_ATUX_PCIXSR_DEV_NUM (3) -#define IOP13XX_ATUX_PCIXSR_FUNC_NUM (0) - -#define IOP13XX_ATUX_IALR_DISABLE 0x00000001 -#define IOP13XX_ATUX_OUMBAR_ENABLE 0x80000000 - -#define IOP13XX_ATUE_OFFSET(ofs) IOP13XX_REG_ADDR32(\ - iop13xx_atue_pmmr_offset + (ofs)) - -#define IOP13XX_ATUE_DID IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0x2) -#define IOP13XX_ATUE_ATUCMD IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0x4) -#define IOP13XX_ATUE_ATUSR IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0x6) - -#define IOP13XX_ATUE_IABAR0 IOP13XX_ATUE_OFFSET(0x10) -#define IOP13XX_ATUE_IAUBAR0 IOP13XX_ATUE_OFFSET(0x14) -#define IOP13XX_ATUE_IABAR1 IOP13XX_ATUE_OFFSET(0x18) -#define IOP13XX_ATUE_IAUBAR1 IOP13XX_ATUE_OFFSET(0x1c) -#define IOP13XX_ATUE_IABAR2 IOP13XX_ATUE_OFFSET(0x20) -#define IOP13XX_ATUE_IAUBAR2 IOP13XX_ATUE_OFFSET(0x24) -#define IOP13XX_ATUE_IALR0 IOP13XX_ATUE_OFFSET(0x40) -#define IOP13XX_ATUE_IATVR0 IOP13XX_ATUE_OFFSET(0x44) -#define IOP13XX_ATUE_IAUTVR0 IOP13XX_ATUE_OFFSET(0x48) -#define IOP13XX_ATUE_IALR1 IOP13XX_ATUE_OFFSET(0x4c) -#define IOP13XX_ATUE_IATVR1 IOP13XX_ATUE_OFFSET(0x50) -#define IOP13XX_ATUE_IAUTVR1 IOP13XX_ATUE_OFFSET(0x54) -#define IOP13XX_ATUE_IALR2 IOP13XX_ATUE_OFFSET(0x58) -#define IOP13XX_ATUE_IATVR2 IOP13XX_ATUE_OFFSET(0x5c) -#define IOP13XX_ATUE_IAUTVR2 IOP13XX_ATUE_OFFSET(0x60) -#define IOP13XX_ATUE_PE_LSTS IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0xe2) -#define IOP13XX_ATUE_OIOWTVR IOP13XX_ATUE_OFFSET(0x304) -#define IOP13XX_ATUE_OUMBAR0 IOP13XX_ATUE_OFFSET(0x308) -#define IOP13XX_ATUE_OUMWTVR0 IOP13XX_ATUE_OFFSET(0x30c) -#define IOP13XX_ATUE_OUMBAR1 IOP13XX_ATUE_OFFSET(0x310) -#define IOP13XX_ATUE_OUMWTVR1 IOP13XX_ATUE_OFFSET(0x314) -#define IOP13XX_ATUE_OUMBAR2 IOP13XX_ATUE_OFFSET(0x318) -#define IOP13XX_ATUE_OUMWTVR2 IOP13XX_ATUE_OFFSET(0x31c) -#define IOP13XX_ATUE_OUMBAR3 IOP13XX_ATUE_OFFSET(0x320) -#define IOP13XX_ATUE_OUMWTVR3 IOP13XX_ATUE_OFFSET(0x324) - -#define IOP13XX_ATUE_ATUCR IOP13XX_ATUE_OFFSET(0x70) -#define IOP13XX_ATUE_PCSR IOP13XX_ATUE_OFFSET(0x74) -#define IOP13XX_ATUE_ATUISR IOP13XX_ATUE_OFFSET(0x78) -#define IOP13XX_ATUE_OIOBAR IOP13XX_ATUE_OFFSET(0x300) -#define IOP13XX_ATUE_OCCAR IOP13XX_ATUE_OFFSET(0x32c) -#define IOP13XX_ATUE_OCCDR IOP13XX_ATUE_OFFSET(0x330) - -#define IOP13XX_ATUE_PIE_STS IOP13XX_ATUE_OFFSET(0x384) -#define IOP13XX_ATUE_PIE_MSK IOP13XX_ATUE_OFFSET(0x388) - -#define IOP13XX_ATUE_ATUCR_IVM (1 << 6) -#define IOP13XX_ATUE_ATUCR_OUT_EN (1 << 1) -#define IOP13XX_ATUE_OCCAR_BUS_NUM (24) -#define IOP13XX_ATUE_OCCAR_DEV_NUM (19) -#define IOP13XX_ATUE_OCCAR_FUNC_NUM (16) -#define IOP13XX_ATUE_OCCAR_EXT_REG (8) -#define IOP13XX_ATUE_OCCAR_REG (2) - -#define IOP13XX_ATUE_PCSR_BUS_NUM (24) -#define IOP13XX_ATUE_PCSR_DEV_NUM (19) -#define IOP13XX_ATUE_PCSR_FUNC_NUM (16) -#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY (1 << 15) -#define IOP13XX_ATUE_PCSR_IN_Q_BUSY (1 << 14) -#define IOP13XX_ATUE_PCSR_END_POINT (1 << 13) -#define IOP13XX_ATUE_PCSR_LLRB_BUSY (1 << 12) - -#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK (0xff) -#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK (0x1f) -#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK (0x7) - -#define IOP13XX_ATUE_PCSR_CORE_RESET (8) -#define IOP13XX_ATUE_PCSR_FUNC_NUM (16) - -#define IOP13XX_ATUE_LSTS_TRAINING (1 << 11) -#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG (1 << 28) -#define IOP13XX_ATUE_STAT_PME (1 << 27) -#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG (1 << 26) -#define IOP13XX_ATUE_STAT_IVM (1 << 25) -#define IOP13XX_ATUE_STAT_BIST (1 << 24) -#define IOP13XX_ATUE_STAT_CFG_WRITE (1 << 18) -#define IOP13XX_ATUE_STAT_VPD_ADDR (1 << 17) -#define IOP13XX_ATUE_STAT_POWER_TRAN (1 << 16) -#define IOP13XX_ATUE_STAT_HALT_ON_ERROR (1 << 13) -#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR (1 << 12) -#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG (1 << 11) -#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR (1 << 10) -#define IOP13XX_ATUE_STAT_ERR_COR (1 << 9 ) -#define IOP13XX_ATUE_STAT_ERR_UNCOR (1 << 8 ) -#define IOP13XX_ATUE_STAT_CRS (1 << 7 ) -#define IOP13XX_ATUE_STAT_LNK_DWN (1 << 6 ) -#define IOP13XX_ATUE_STAT_INT_REC_MABORT (1 << 5 ) -#define IOP13XX_ATUE_STAT_DET_PAR_ERR (1 << 4 ) -#define IOP13XX_ATUE_STAT_EXT_REC_MABORT (1 << 3 ) -#define IOP13XX_ATUE_STAT_SIG_TABORT (1 << 2 ) -#define IOP13XX_ATUE_STAT_EXT_REC_TABORT (1 << 1 ) -#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR (1 << 0 ) - -#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ (1 << 31) -#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT (1 << 30) -#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP (1 << 29) -#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR (1 << 28) -#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ (1 << 20) -#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR (1 << 19) -#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP (1 << 18) -#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW (1 << 17) -#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP (1 << 16) -#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT (1 << 15) -#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT (1 << 14) -#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR (1 << 13) -#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP (1 << 12) -#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR (1 << 4 ) -#define IOP13XX_ATUE_ESTAT_TRAINING_ERR (1 << 0 ) - -#define IOP13XX_ATUE_IALR_DISABLE (0x00000001) -#define IOP13XX_ATUE_OUMBAR_ENABLE (0x80000000) -#define IOP13XX_ATU_OUMBAR_FUNC_NUM (28) -#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7) -/*=======================================================================*/ - -/*============================MESSAGING UNIT=============================*/ -#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\ - (ofs)) - -#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10) -#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14) -#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18) -#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C) -#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20) -#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24) -#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28) -#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C) -#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30) -#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34) -#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38) -#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C) -#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48) -#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50) -#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54) -#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84) - -#define IOP13XX_MU_WINDOW_SIZE (8 * 1024) -#define IOP13XX_MU_BASE_PHYS (0xff000000) -#define IOP13XX_MU_BASE_PCI (0xff000000) -#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48) -#define IOP13XX_MU_MIMR_CORE_SELECT (15) -/*=======================================================================*/ - -/*==============================ADMA UNITS===============================*/ -#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9)) -#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0) - -/*==============================XSI BRIDGE===============================*/ -#define IOP13XX_XBG_BECSR IOP13XX_REG_ADDR32(0x178c) -#define IOP13XX_XBG_BERAR IOP13XX_REG_ADDR32(0x1790) -#define IOP13XX_XBG_BERUAR IOP13XX_REG_ADDR32(0x1794) -#define is_atue_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \ - IOP13XX_PMMR_VIRT_TO_PHYS(\ - IOP13XX_ATUE_OCCDR))\ - && (__raw_readl(IOP13XX_XBG_BECSR) & 1)) -#define is_atux_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \ - IOP13XX_PMMR_VIRT_TO_PHYS(\ - IOP13XX_ATUX_OCCDR))\ - && (__raw_readl(IOP13XX_XBG_BECSR) & 1)) -/*=======================================================================*/ - -#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\ - (ofs)) - -#define IOP13XX_PBI_CR IOP13XX_PBI_OFFSET(0x0) -#define IOP13XX_PBI_SR IOP13XX_PBI_OFFSET(0x4) -#define IOP13XX_PBI_BAR0 IOP13XX_PBI_OFFSET(0x8) -#define IOP13XX_PBI_LR0 IOP13XX_PBI_OFFSET(0xc) -#define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10) -#define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14) - -#define IOP13XX_PROCESSOR_FREQ IOP13XX_REG_ADDR32(0x2180) - -/* Watchdog timer definitions */ -#define IOP_WDTCR_EN_ARM 0x1e1e1e1e -#define IOP_WDTCR_EN 0xe1e1e1e1 -#define IOP_WDTCR_DIS_ARM 0x1f1f1f1f -#define IOP_WDTCR_DIS 0xf1f1f1f1 -#define IOP_RCSR_WDT (1 << 5) /* reset caused by watchdog timer */ -#define IOP13XX_WDTSR_WRITE_EN (1 << 31) /* used to speed up reset requests */ -#define IOP13XX_WDTCR_IB_RESET (1 << 0) - -#endif /* _IOP13XX_HW_H_ */ diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/include/asm-arm/arch-iop13xx/iq81340.h deleted file mode 100644 index ba2cf931e9c..00000000000 --- a/include/asm-arm/arch-iop13xx/iq81340.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _IQ81340_H_ -#define _IQ81340_H_ - -#define IQ81340_PCE_BAR0 IOP13XX_PBI_LOWER_MEM_RA -#define IQ81340_PCE_BAR1 (IQ81340_PCE_BAR0 + 0x02000000) - -#define IQ81340_FLASHBASE IQ81340_PCE_BAR0 /* Flash */ - -#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a)) - -#define IQ81340_PRD_CODE IQ81340_PCE_BAR1_OFFSET(0) -#define IQ81340_BRD_STEP IQ81340_PCE_BAR1_OFFSET(0x10000) -#define IQ81340_CPLD_REV IQ81340_PCE_BAR1_OFFSET(0x20000) -#define IQ81340_LED IQ81340_PCE_BAR1_OFFSET(0x30000) -#define IQ81340_LHEX IQ81340_PCE_BAR1_OFFSET(0x40000) -#define IQ81340_RHEX IQ81340_PCE_BAR1_OFFSET(0x50000) -#define IQ81340_BUZZER IQ81340_PCE_BAR1_OFFSET(0x60000) -#define IQ81340_32K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x70000) -#define IQ81340_256K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x80000) -#define IQ81340_ROTARY_SW IQ81340_PCE_BAR1_OFFSET(0xd0000) -#define IQ81340_BATT_STAT IQ81340_PCE_BAR1_OFFSET(0xf0000) -#define IQ81340_CMP_FLSH IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */ - -#define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH) -#define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1) - - -#endif /* _IQ81340_H_ */ diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h deleted file mode 100644 index 054e7acb5bf..00000000000 --- a/include/asm-arm/arch-iop13xx/irqs.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef _IOP13XX_IRQS_H_ -#define _IOP13XX_IRQS_H_ - -#ifndef __ASSEMBLER__ -#include - -/* INTPND0 CP6 R0 Page 3 - */ -static inline u32 read_intpnd_0(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val)); - return val; -} - -/* INTPND1 CP6 R1 Page 3 - */ -static inline u32 read_intpnd_1(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val)); - return val; -} - -/* INTPND2 CP6 R2 Page 3 - */ -static inline u32 read_intpnd_2(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val)); - return val; -} - -/* INTPND3 CP6 R3 Page 3 - */ -static inline u32 read_intpnd_3(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val)); - return val; -} -#endif - -#define INTBASE 0 -#define INTSIZE_4 1 - -/* - * iop34x chipset interrupts - */ -#define IOP13XX_IRQ(x) (IOP13XX_IRQ_OFS + (x)) - -/* - * On IRQ or FIQ register - */ -#define IRQ_IOP13XX_ADMA0_EOT (0) -#define IRQ_IOP13XX_ADMA0_EOC (1) -#define IRQ_IOP13XX_ADMA1_EOT (2) -#define IRQ_IOP13XX_ADMA1_EOC (3) -#define IRQ_IOP13XX_ADMA2_EOT (4) -#define IRQ_IOP13XX_ADMA2_EOC (5) -#define IRQ_IOP134_WATCHDOG (6) -#define IRQ_IOP13XX_RSVD_7 (7) -#define IRQ_IOP13XX_TIMER0 (8) -#define IRQ_IOP13XX_TIMER1 (9) -#define IRQ_IOP13XX_I2C_0 (10) -#define IRQ_IOP13XX_I2C_1 (11) -#define IRQ_IOP13XX_MSG (12) -#define IRQ_IOP13XX_MSGIBQ (13) -#define IRQ_IOP13XX_ATU_IM (14) -#define IRQ_IOP13XX_ATU_BIST (15) -#define IRQ_IOP13XX_PPMU (16) -#define IRQ_IOP13XX_COREPMU (17) -#define IRQ_IOP13XX_CORECACHE (18) -#define IRQ_IOP13XX_RSVD_19 (19) -#define IRQ_IOP13XX_RSVD_20 (20) -#define IRQ_IOP13XX_RSVD_21 (21) -#define IRQ_IOP13XX_RSVD_22 (22) -#define IRQ_IOP13XX_RSVD_23 (23) -#define IRQ_IOP13XX_XINT0 (24) -#define IRQ_IOP13XX_XINT1 (25) -#define IRQ_IOP13XX_XINT2 (26) -#define IRQ_IOP13XX_XINT3 (27) -#define IRQ_IOP13XX_XINT4 (28) -#define IRQ_IOP13XX_XINT5 (29) -#define IRQ_IOP13XX_XINT6 (30) -#define IRQ_IOP13XX_XINT7 (31) - /* IINTSRC1 bit */ -#define IRQ_IOP13XX_XINT8 (32) /* 0 */ -#define IRQ_IOP13XX_XINT9 (33) /* 1 */ -#define IRQ_IOP13XX_XINT10 (34) /* 2 */ -#define IRQ_IOP13XX_XINT11 (35) /* 3 */ -#define IRQ_IOP13XX_XINT12 (36) /* 4 */ -#define IRQ_IOP13XX_XINT13 (37) /* 5 */ -#define IRQ_IOP13XX_XINT14 (38) /* 6 */ -#define IRQ_IOP13XX_XINT15 (39) /* 7 */ -#define IRQ_IOP13XX_RSVD_40 (40) /* 8 */ -#define IRQ_IOP13XX_RSVD_41 (41) /* 9 */ -#define IRQ_IOP13XX_RSVD_42 (42) /* 10 */ -#define IRQ_IOP13XX_RSVD_43 (43) /* 11 */ -#define IRQ_IOP13XX_RSVD_44 (44) /* 12 */ -#define IRQ_IOP13XX_RSVD_45 (45) /* 13 */ -#define IRQ_IOP13XX_RSVD_46 (46) /* 14 */ -#define IRQ_IOP13XX_RSVD_47 (47) /* 15 */ -#define IRQ_IOP13XX_RSVD_48 (48) /* 16 */ -#define IRQ_IOP13XX_RSVD_49 (49) /* 17 */ -#define IRQ_IOP13XX_RSVD_50 (50) /* 18 */ -#define IRQ_IOP13XX_UART0 (51) /* 19 */ -#define IRQ_IOP13XX_UART1 (52) /* 20 */ -#define IRQ_IOP13XX_PBIE (53) /* 21 */ -#define IRQ_IOP13XX_ATU_CRW (54) /* 22 */ -#define IRQ_IOP13XX_ATU_ERR (55) /* 23 */ -#define IRQ_IOP13XX_MCU_ERR (56) /* 24 */ -#define IRQ_IOP13XX_ADMA0_ERR (57) /* 25 */ -#define IRQ_IOP13XX_ADMA1_ERR (58) /* 26 */ -#define IRQ_IOP13XX_ADMA2_ERR (59) /* 27 */ -#define IRQ_IOP13XX_RSVD_60 (60) /* 28 */ -#define IRQ_IOP13XX_RSVD_61 (61) /* 29 */ -#define IRQ_IOP13XX_MSG_ERR (62) /* 30 */ -#define IRQ_IOP13XX_RSVD_63 (63) /* 31 */ - /* IINTSRC2 bit */ -#define IRQ_IOP13XX_INTERPROC (64) /* 0 */ -#define IRQ_IOP13XX_RSVD_65 (65) /* 1 */ -#define IRQ_IOP13XX_RSVD_66 (66) /* 2 */ -#define IRQ_IOP13XX_RSVD_67 (67) /* 3 */ -#define IRQ_IOP13XX_RSVD_68 (68) /* 4 */ -#define IRQ_IOP13XX_RSVD_69 (69) /* 5 */ -#define IRQ_IOP13XX_RSVD_70 (70) /* 6 */ -#define IRQ_IOP13XX_RSVD_71 (71) /* 7 */ -#define IRQ_IOP13XX_RSVD_72 (72) /* 8 */ -#define IRQ_IOP13XX_RSVD_73 (73) /* 9 */ -#define IRQ_IOP13XX_RSVD_74 (74) /* 10 */ -#define IRQ_IOP13XX_RSVD_75 (75) /* 11 */ -#define IRQ_IOP13XX_RSVD_76 (76) /* 12 */ -#define IRQ_IOP13XX_RSVD_77 (77) /* 13 */ -#define IRQ_IOP13XX_RSVD_78 (78) /* 14 */ -#define IRQ_IOP13XX_RSVD_79 (79) /* 15 */ -#define IRQ_IOP13XX_RSVD_80 (80) /* 16 */ -#define IRQ_IOP13XX_RSVD_81 (81) /* 17 */ -#define IRQ_IOP13XX_RSVD_82 (82) /* 18 */ -#define IRQ_IOP13XX_RSVD_83 (83) /* 19 */ -#define IRQ_IOP13XX_RSVD_84 (84) /* 20 */ -#define IRQ_IOP13XX_RSVD_85 (85) /* 21 */ -#define IRQ_IOP13XX_RSVD_86 (86) /* 22 */ -#define IRQ_IOP13XX_RSVD_87 (87) /* 23 */ -#define IRQ_IOP13XX_RSVD_88 (88) /* 24 */ -#define IRQ_IOP13XX_RSVD_89 (89) /* 25 */ -#define IRQ_IOP13XX_RSVD_90 (90) /* 26 */ -#define IRQ_IOP13XX_RSVD_91 (91) /* 27 */ -#define IRQ_IOP13XX_RSVD_92 (92) /* 28 */ -#define IRQ_IOP13XX_RSVD_93 (93) /* 29 */ -#define IRQ_IOP13XX_SIB_ERR (94) /* 30 */ -#define IRQ_IOP13XX_SRAM_ERR (95) /* 31 */ - /* IINTSRC3 bit */ -#define IRQ_IOP13XX_I2C_2 (96) /* 0 */ -#define IRQ_IOP13XX_ATUE_BIST (97) /* 1 */ -#define IRQ_IOP13XX_ATUE_CRW (98) /* 2 */ -#define IRQ_IOP13XX_ATUE_ERR (99) /* 3 */ -#define IRQ_IOP13XX_IMU (100) /* 4 */ -#define IRQ_IOP13XX_RSVD_101 (101) /* 5 */ -#define IRQ_IOP13XX_RSVD_102 (102) /* 6 */ -#define IRQ_IOP13XX_TPMI0_OUT (103) /* 7 */ -#define IRQ_IOP13XX_TPMI1_OUT (104) /* 8 */ -#define IRQ_IOP13XX_TPMI2_OUT (105) /* 9 */ -#define IRQ_IOP13XX_TPMI3_OUT (106) /* 10 */ -#define IRQ_IOP13XX_ATUE_IMA (107) /* 11 */ -#define IRQ_IOP13XX_ATUE_IMB (108) /* 12 */ -#define IRQ_IOP13XX_ATUE_IMC (109) /* 13 */ -#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */ -#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */ -#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */ -#define IRQ_IOP13XX_INBD_MSI (113) /* 17 */ -#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */ -#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */ -#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */ -#define IRQ_IOP13XX_RSVD_117 (117) /* 21 */ -#define IRQ_IOP13XX_RSVD_118 (118) /* 22 */ -#define IRQ_IOP13XX_RSVD_119 (119) /* 23 */ -#define IRQ_IOP13XX_RSVD_120 (120) /* 24 */ -#define IRQ_IOP13XX_RSVD_121 (121) /* 25 */ -#define IRQ_IOP13XX_RSVD_122 (122) /* 26 */ -#define IRQ_IOP13XX_RSVD_123 (123) /* 27 */ -#define IRQ_IOP13XX_RSVD_124 (124) /* 28 */ -#define IRQ_IOP13XX_RSVD_125 (125) /* 29 */ -#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */ -#define IRQ_IOP13XX_HPI (127) /* 31 */ - -#ifdef CONFIG_PCI_MSI -#define IRQ_IOP13XX_MSI_0 (IRQ_IOP13XX_HPI + 1) -#define NR_IOP13XX_IRQS (IRQ_IOP13XX_MSI_0 + 128) -#else -#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1) -#endif - -#define NR_IRQS NR_IOP13XX_IRQS - -#endif /* _IOP13XX_IRQ_H_ */ diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h deleted file mode 100644 index 031a0fa78ef..00000000000 --- a/include/asm-arm/arch-iop13xx/memory.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) -#define TASK_SIZE UL(0x3f000000) -#define PAGE_OFFSET UL(0x40000000) -#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3) - -#ifndef __ASSEMBLY__ - -#if defined(CONFIG_ARCH_IOP13XX) -#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE) -#define IOP13XX_PMMR_V_END (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE) -#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE) -#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE) - -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ - -/* RAM has 1:1 mapping on the PCIe/x Busses */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - -#define virt_to_lbus(x) \ -(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) && \ -((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? \ -((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \ -((x) - PAGE_OFFSET + PHYS_OFFSET)) - -#define lbus_to_virt(x) \ -(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \ -((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \ -((x) - PHYS_OFFSET + PAGE_OFFSET)) - -/* Device is an lbus device if it is on the platform bus of the IOP13XX */ -#define is_lbus_device(dev) (dev &&\ - (strncmp(dev->bus->name, "platform", 8) == 0)) - -#define __arch_page_to_dma(dev, page) \ -({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \ -(dma_addr_t)__virt_to_bus(page_address(page));}) - -#define __arch_dma_to_virt(dev, addr) \ -({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);}) - -#define __arch_virt_to_dma(dev, addr) \ -({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);}) - -#endif /* CONFIG_ARCH_IOP13XX */ -#endif /* !ASSEMBLY */ - -#define PFN_TO_NID(addr) (0) - -#endif diff --git a/include/asm-arm/arch-iop13xx/msi.h b/include/asm-arm/arch-iop13xx/msi.h deleted file mode 100644 index b80c5ae17e9..00000000000 --- a/include/asm-arm/arch-iop13xx/msi.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _IOP13XX_MSI_H_ -#define _IOP13XX_MSI_H_ -#ifdef CONFIG_PCI_MSI -void iop13xx_msi_init(void); -#else -static inline void iop13xx_msi_init(void) -{ - return; -} -#endif -#endif diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h deleted file mode 100644 index 4041f30d4cd..00000000000 --- a/include/asm-arm/arch-iop13xx/pci.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _IOP13XX_PCI_H_ -#define _IOP13XX_PCI_H_ -#include -#include - -struct pci_sys_data; -struct hw_pci; -int iop13xx_pci_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *); -void iop13xx_atu_select(struct hw_pci *plat_pci); -void iop13xx_pci_init(void); -void iop13xx_map_pci_memory(void); - -#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \ - PCI_STATUS_SIG_TARGET_ABORT | \ - PCI_STATUS_REC_TARGET_ABORT | \ - PCI_STATUS_REC_TARGET_ABORT | \ - PCI_STATUS_REC_MASTER_ABORT | \ - PCI_STATUS_SIG_SYSTEM_ERROR | \ - PCI_STATUS_DETECTED_PARITY) - -#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \ - IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \ - IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \ - IOP13XX_ATUE_STAT_ERR_COR | \ - IOP13XX_ATUE_STAT_ERR_UNCOR | \ - IOP13XX_ATUE_STAT_CRS | \ - IOP13XX_ATUE_STAT_DET_PAR_ERR | \ - IOP13XX_ATUE_STAT_EXT_REC_MABORT | \ - IOP13XX_ATUE_STAT_SIG_TABORT | \ - IOP13XX_ATUE_STAT_EXT_REC_TABORT | \ - IOP13XX_ATUE_STAT_MASTER_DATA_PAR) - -#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \ - IOP13XX_ATUX_STAT_REC_SCEM | \ - IOP13XX_ATUX_STAT_TX_SERR | \ - IOP13XX_ATUX_STAT_DET_PAR_ERR | \ - IOP13XX_ATUX_STAT_INT_REC_MABORT | \ - IOP13XX_ATUX_STAT_REC_SERR | \ - IOP13XX_ATUX_STAT_EXT_REC_MABORT | \ - IOP13XX_ATUX_STAT_EXT_REC_TABORT | \ - IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \ - IOP13XX_ATUX_STAT_MASTER_DATA_PAR) - -/* PCI interrupts - */ -#define ATUX_INTA IRQ_IOP13XX_XINT0 -#define ATUX_INTB IRQ_IOP13XX_XINT1 -#define ATUX_INTC IRQ_IOP13XX_XINT2 -#define ATUX_INTD IRQ_IOP13XX_XINT3 - -#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA -#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB -#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC -#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD - -#endif /* _IOP13XX_PCI_H_ */ diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h deleted file mode 100644 index 8575af8db78..00000000000 --- a/include/asm-arm/arch-iop13xx/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop13xx/system.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Reset the internal bus (warning both cores are reset) - */ - write_wdtcr(IOP_WDTCR_EN_ARM); - write_wdtcr(IOP_WDTCR_EN); - write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET); - write_wdtcr(0x1000); - - for(;;); -} diff --git a/include/asm-arm/arch-iop13xx/time.h b/include/asm-arm/arch-iop13xx/time.h deleted file mode 100644 index 49213d9d7ca..00000000000 --- a/include/asm-arm/arch-iop13xx/time.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef _IOP13XX_TIME_H_ -#define _IOP13XX_TIME_H_ -#define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0 - -#define IOP_TMR_EN 0x02 -#define IOP_TMR_RELOAD 0x04 -#define IOP_TMR_PRIVILEGED 0x08 -#define IOP_TMR_RATIO_1_1 0x00 - -#define IOP13XX_XSI_FREQ_RATIO_MASK (3 << 19) -#define IOP13XX_XSI_FREQ_RATIO_2 (0 << 19) -#define IOP13XX_XSI_FREQ_RATIO_3 (1 << 19) -#define IOP13XX_XSI_FREQ_RATIO_4 (2 << 19) -#define IOP13XX_CORE_FREQ_MASK (7 << 16) -#define IOP13XX_CORE_FREQ_600 (0 << 16) -#define IOP13XX_CORE_FREQ_667 (1 << 16) -#define IOP13XX_CORE_FREQ_800 (2 << 16) -#define IOP13XX_CORE_FREQ_933 (3 << 16) -#define IOP13XX_CORE_FREQ_1000 (4 << 16) -#define IOP13XX_CORE_FREQ_1200 (5 << 16) - -void iop_init_time(unsigned long tickrate); -unsigned long iop_gettimeoffset(void); - -static inline unsigned long iop13xx_core_freq(void) -{ - unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ); - freq &= IOP13XX_CORE_FREQ_MASK; - switch (freq) { - case IOP13XX_CORE_FREQ_600: - return 600000000; - case IOP13XX_CORE_FREQ_667: - return 667000000; - case IOP13XX_CORE_FREQ_800: - return 800000000; - case IOP13XX_CORE_FREQ_933: - return 933000000; - case IOP13XX_CORE_FREQ_1000: - return 1000000000; - case IOP13XX_CORE_FREQ_1200: - return 1200000000; - default: - printk("%s: warning unknown frequency, defaulting to 800Mhz\n", - __FUNCTION__); - } - - return 800000000; -} - -static inline unsigned long iop13xx_xsi_bus_ratio(void) -{ - unsigned long ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ); - ratio &= IOP13XX_XSI_FREQ_RATIO_MASK; - switch (ratio) { - case IOP13XX_XSI_FREQ_RATIO_2: - return 2; - case IOP13XX_XSI_FREQ_RATIO_3: - return 3; - case IOP13XX_XSI_FREQ_RATIO_4: - return 4; - default: - printk("%s: warning unknown ratio, defaulting to 2\n", - __FUNCTION__); - } - - return 2; -} - -static inline void write_tmr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val)); -} - -static inline void write_tmr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (val)); -} - -static inline u32 read_tcr0(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c9, 0" : "=r" (val)); - return val; -} - -static inline u32 read_tcr1(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val)); - return val; -} - -static inline void write_trr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val)); -} - -static inline void write_trr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (val)); -} - -static inline void write_tisr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (val)); -} -#endif diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h deleted file mode 100644 index 47564ecb387..00000000000 --- a/include/asm-arm/arch-iop13xx/timex.h +++ /dev/null @@ -1,3 +0,0 @@ -#include - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h deleted file mode 100644 index 5d4418decb8..00000000000 --- a/include/asm-arm/arch-iop13xx/uncompress.h +++ /dev/null @@ -1,23 +0,0 @@ -#include -#include -#include - -#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS) -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - UART_BASE[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/include/asm-arm/arch-iop13xx/vmalloc.h deleted file mode 100644 index c5345674034..00000000000 --- a/include/asm-arm/arch-iop13xx/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _VMALLOC_H_ -#define _VMALLOC_H_ -#define VMALLOC_END 0xfa000000UL -#endif diff --git a/include/asm-arm/arch-iop32x/adma.h b/include/asm-arm/arch-iop32x/adma.h deleted file mode 100644 index 5ed92037dd1..00000000000 --- a/include/asm-arm/arch-iop32x/adma.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef IOP32X_ADMA_H -#define IOP32X_ADMA_H -#include -#endif - diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S deleted file mode 100644 index 9022b6849e2..00000000000 --- a/include/asm-arm/arch-iop32x/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rx - mov \rx, #0xfe000000 @ physical as well as virtual - orr \rx, \rx, #0x00800000 @ location of the UART - .endm - -#define UART_SHIFT 0 -#include diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h deleted file mode 100644 index e977a9ef316..00000000000 --- a/include/asm-arm/arch-iop32x/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/dma.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S deleted file mode 100644 index 207db99dfbd..00000000000 --- a/include/asm-arm/arch-iop32x/entry-macro.S +++ /dev/null @@ -1,36 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/entry-macro.S - * - * Low-level IRQ helper macros for IOP32x-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mrc p15, 0, \tmp, c15, c1, 0 - orr \tmp, \tmp, #(1 << 6) - mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access - mrc p15, 0, \tmp, c15, c1, 0 - mov \tmp, \tmp - sub pc, pc, #4 @ cp_wait - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC - cmp \irqstat, #0 - clzne \irqnr, \irqstat - rsbne \irqnr, \irqnr, #31 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - mrc p15, 0, \tmp1, c15, c1, 0 - ands \tmp2, \tmp1, #(1 << 6) - bicne \tmp1, \tmp1, #(1 << 6) - mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access - .endm diff --git a/include/asm-arm/arch-iop32x/glantank.h b/include/asm-arm/arch-iop32x/glantank.h deleted file mode 100644 index bf0665acc1c..00000000000 --- a/include/asm-arm/arch-iop32x/glantank.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/glantank.h - * - * IO-Data GLAN Tank board registers - */ - -#ifndef __GLANTANK_H -#define __GLANTANK_H - -#define GLANTANK_UART 0xfe800000 /* UART */ - - -#endif diff --git a/include/asm-arm/arch-iop32x/gpio.h b/include/asm-arm/arch-iop32x/gpio.h deleted file mode 100644 index 708f4ec9db1..00000000000 --- a/include/asm-arm/arch-iop32x/gpio.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_IOP32X_GPIO_H -#define __ASM_ARCH_IOP32X_GPIO_H - -#include - -#endif diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h deleted file mode 100644 index 6556ed5eee3..00000000000 --- a/include/asm-arm/arch-iop32x/hardware.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/hardware.h - */ - -#ifndef __HARDWARE_H -#define __HARDWARE_H - -#include - -/* - * Note about PCI IO space mappings - * - * To make IO space accesses efficient, we store virtual addresses in - * the IO resources. - * - * The PCI IO space is located at virtual 0xfe000000 from physical - * 0x90000000. The PCI BARs must be programmed with physical addresses, - * but when we read them, we convert them to virtual addresses. See - * arch/arm/plat-iop/pci.c. - */ -#define pcibios_assign_all_busses() 1 -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 - -#ifndef __ASSEMBLY__ -void iop32x_init_irq(void); -#endif - - -/* - * Generic chipset bits - */ -#include "iop32x.h" - -/* - * Board specific bits - */ -#include "glantank.h" -#include "iq80321.h" -#include "iq31244.h" -#include "n2100.h" - - -#endif diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h deleted file mode 100644 index 47b2736236e..00000000000 --- a/include/asm-arm/arch-iop32x/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include - -extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop3xx_iounmap(void __iomem *addr); - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) -#define __mem_pci(a) (a) - -#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop3xx_iounmap(a) - -#endif diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h deleted file mode 100644 index 0d8af57221a..00000000000 --- a/include/asm-arm/arch-iop32x/iop32x.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/iop32x.h - * - * Intel IOP32X Chip definitions - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOP32X_H -#define __IOP32X_H - -/* - * Peripherals that are shared between the iop32x and iop33x but - * located at different addresses. - */ -#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg)) -#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) - -#include - -/* ATU Parameters - * set up a 1:1 bus to physical ram relationship - * w/ physical ram on top of pci in the memory map - */ -#define IOP32X_MAX_RAM_SIZE 0x40000000UL -#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE -#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000 -#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000 -#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE - -#endif diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h deleted file mode 100644 index fff4eafa1f6..00000000000 --- a/include/asm-arm/arch-iop32x/iq31244.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/iq31244.h - * - * Intel IQ31244 evaluation board registers - */ - -#ifndef __IQ31244_H -#define __IQ31244_H - -#define IQ31244_UART 0xfe800000 /* UART #1 */ -#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */ -#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ -#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ -#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h deleted file mode 100644 index eb69db9b9a0..00000000000 --- a/include/asm-arm/arch-iop32x/iq80321.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/iq80321.h - * - * Intel IQ80321 evaluation board registers - */ - -#ifndef __IQ80321_H -#define __IQ80321_H - -#define IQ80321_UART 0xfe800000 /* UART #1 */ -#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */ -#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ -#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ -#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h deleted file mode 100644 index bbaef873afc..00000000000 --- a/include/asm-arm/arch-iop32x/irqs.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/irqs.h - * - * Author: Rory Bolt - * Copyright: (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IRQS_H -#define __IRQS_H - -/* - * IOP80321 chipset interrupts - */ -#define IRQ_IOP32X_DMA0_EOT 0 -#define IRQ_IOP32X_DMA0_EOC 1 -#define IRQ_IOP32X_DMA1_EOT 2 -#define IRQ_IOP32X_DMA1_EOC 3 -#define IRQ_IOP32X_AA_EOT 6 -#define IRQ_IOP32X_AA_EOC 7 -#define IRQ_IOP32X_CORE_PMON 8 -#define IRQ_IOP32X_TIMER0 9 -#define IRQ_IOP32X_TIMER1 10 -#define IRQ_IOP32X_I2C_0 11 -#define IRQ_IOP32X_I2C_1 12 -#define IRQ_IOP32X_MESSAGING 13 -#define IRQ_IOP32X_ATU_BIST 14 -#define IRQ_IOP32X_PERFMON 15 -#define IRQ_IOP32X_CORE_PMU 16 -#define IRQ_IOP32X_BIU_ERR 17 -#define IRQ_IOP32X_ATU_ERR 18 -#define IRQ_IOP32X_MCU_ERR 19 -#define IRQ_IOP32X_DMA0_ERR 20 -#define IRQ_IOP32X_DMA1_ERR 21 -#define IRQ_IOP32X_AA_ERR 23 -#define IRQ_IOP32X_MSG_ERR 24 -#define IRQ_IOP32X_SSP 25 -#define IRQ_IOP32X_XINT0 27 -#define IRQ_IOP32X_XINT1 28 -#define IRQ_IOP32X_XINT2 29 -#define IRQ_IOP32X_XINT3 30 -#define IRQ_IOP32X_HPI 31 - -#define NR_IRQS 32 - - -#endif diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h deleted file mode 100644 index bdcf03895ee..00000000000 --- a/include/asm-arm/arch-iop32x/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xa0000000) - -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - - -#endif diff --git a/include/asm-arm/arch-iop32x/n2100.h b/include/asm-arm/arch-iop32x/n2100.h deleted file mode 100644 index 77a8af47662..00000000000 --- a/include/asm-arm/arch-iop32x/n2100.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/n2100.h - * - * Thecus N2100 board registers - */ - -#ifndef __N2100_H -#define __N2100_H - -#define N2100_UART 0xfe800000 /* UART */ - -#define N2100_COPY_BUTTON IOP3XX_GPIO_LINE(0) -#define N2100_PCA9532_RESET IOP3XX_GPIO_LINE(2) -#define N2100_RESET_BUTTON IOP3XX_GPIO_LINE(3) -#define N2100_HARDWARE_RESET IOP3XX_GPIO_LINE(4) -#define N2100_POWER_BUTTON IOP3XX_GPIO_LINE(5) - - -#endif diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h deleted file mode 100644 index 17b7eb7e9c0..00000000000 --- a/include/asm-arm/arch-iop32x/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - local_irq_disable(); - - if (machine_is_n2100()) { - gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW); - gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT); - while (1) - ; - } - - *IOP3XX_PCSR = 0x30; - - /* Jump into ROM at address 0 */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-iop32x/time.h b/include/asm-arm/arch-iop32x/time.h deleted file mode 100644 index 0f28c994962..00000000000 --- a/include/asm-arm/arch-iop32x/time.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _IOP32X_TIME_H_ -#define _IOP32X_TIME_H_ -#define IRQ_IOP_TIMER0 IRQ_IOP32X_TIMER0 -#endif diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h deleted file mode 100644 index 44570461982..00000000000 --- a/include/asm-arm/arch-iop32x/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/timex.h - * - * IOP32x architecture timex specifications - */ - -#include - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h deleted file mode 100644 index 07028786394..00000000000 --- a/include/asm-arm/arch-iop32x/uncompress.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/uncompress.h - */ - -#include -#include -#include -#include - -static volatile u8 *uart_base; - -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - uart_base[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - if (machine_is_iq80321()) - uart_base = (volatile u8 *)IQ80321_UART; - else if (machine_is_iq31244() || machine_is_em7210()) - uart_base = (volatile u8 *)IQ31244_UART; - else - uart_base = (volatile u8 *)0xfe800000; -} - -/* - * nothing to do - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h deleted file mode 100644 index 0a70baa1951..00000000000 --- a/include/asm-arm/arch-iop32x/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000 diff --git a/include/asm-arm/arch-iop33x/adma.h b/include/asm-arm/arch-iop33x/adma.h deleted file mode 100644 index 4b92f795f90..00000000000 --- a/include/asm-arm/arch-iop33x/adma.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef IOP33X_ADMA_H -#define IOP33X_ADMA_H -#include -#endif - diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S deleted file mode 100644 index 9e7132ebe6a..00000000000 --- a/include/asm-arm/arch-iop33x/debug-macro.S +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - movne \rx, #0xfe000000 @ virtual - orr \rx, \rx, #0x00ff0000 - orr \rx, \rx, #0x0000f700 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h deleted file mode 100644 index b7775fdc5ad..00000000000 --- a/include/asm-arm/arch-iop33x/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/dma.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S deleted file mode 100644 index b8e3d449e88..00000000000 --- a/include/asm-arm/arch-iop33x/entry-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/entry-macro.S - * - * Low-level IRQ helper macros for IOP33x-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mrc p15, 0, \tmp, c15, c1, 0 - orr \tmp, \tmp, #(1 << 6) - mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access - mrc p15, 0, \tmp, c15, c1, 0 - mov \tmp, \tmp - sub pc, pc, #4 @ cp_wait - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p6, 0, \irqstat, c14, c0, 0 @ Read IINTVEC - cmp \irqstat, #0 - mrceq p6, 0, \irqstat, c14, c0, 0 @ erratum 63 workaround - adds \irqnr, \irqstat, #1 - movne \irqnr, \irqstat, lsr #2 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - mrc p15, 0, \tmp1, c15, c1, 0 - ands \tmp2, \tmp1, #(1 << 6) - bicne \tmp1, \tmp1, #(1 << 6) - mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access - .endm diff --git a/include/asm-arm/arch-iop33x/gpio.h b/include/asm-arm/arch-iop33x/gpio.h deleted file mode 100644 index ddd55bba9bb..00000000000 --- a/include/asm-arm/arch-iop33x/gpio.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_IOP33X_GPIO_H -#define __ASM_ARCH_IOP33X_GPIO_H - -#include - -#endif diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h deleted file mode 100644 index 0659cf94d04..00000000000 --- a/include/asm-arm/arch-iop33x/hardware.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/hardware.h - */ - -#ifndef __HARDWARE_H -#define __HARDWARE_H - -#include - -/* - * Note about PCI IO space mappings - * - * To make IO space accesses efficient, we store virtual addresses in - * the IO resources. - * - * The PCI IO space is located at virtual 0xfe000000 from physical - * 0x90000000. The PCI BARs must be programmed with physical addresses, - * but when we read them, we convert them to virtual addresses. See - * arch/arm/mach-iop3xx/iop3xx-pci.c - */ -#define pcibios_assign_all_busses() 1 -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 - -#ifndef __ASSEMBLY__ -void iop33x_init_irq(void); - -extern struct platform_device iop33x_uart0_device; -extern struct platform_device iop33x_uart1_device; -#endif - - -/* - * Generic chipset bits - * - */ -#include "iop33x.h" - -/* - * Board specific bits - */ -#include "iq80331.h" -#include "iq80332.h" - - -#endif diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h deleted file mode 100644 index 3fc607c46f0..00000000000 --- a/include/asm-arm/arch-iop33x/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include - -extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop3xx_iounmap(void __iomem *addr); - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) -#define __mem_pci(a) (a) - -#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop3xx_iounmap(a) - -#endif diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h deleted file mode 100644 index 766985b9a72..00000000000 --- a/include/asm-arm/arch-iop33x/iop33x.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/iop33x.h - * - * Intel IOP33X Chip definitions - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOP33X_H -#define __IOP33X_H - -/* - * Peripherals that are shared between the iop32x and iop33x but - * located at different addresses. - */ -#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg)) -#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg)) - -#include - -/* UARTs */ -#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700) -#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700) -#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740) -#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740) - -/* ATU Parameters - * set up a 1:1 bus to physical ram relationship - * w/ pci on top of physical ram in memory map - */ -#define IOP33X_MAX_RAM_SIZE 0x80000000UL -#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE -#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE) -#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000 -#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE - - -#endif diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h deleted file mode 100644 index 79b9302017e..00000000000 --- a/include/asm-arm/arch-iop33x/iq80331.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/iq80331.h - * - * Intel IQ80331 evaluation board registers - */ - -#ifndef __IQ80331_H -#define __IQ80331_H - -#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */ -#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ -#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */ -#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h deleted file mode 100644 index 05316562949..00000000000 --- a/include/asm-arm/arch-iop33x/iq80332.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/iq80332.h - * - * Intel IQ80332 evaluation board registers - */ - -#ifndef __IQ80332_H -#define __IQ80332_H - -#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */ -#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ -#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */ -#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h deleted file mode 100644 index d045f840339..00000000000 --- a/include/asm-arm/arch-iop33x/irqs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/irqs.h - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright: (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IRQS_H -#define __IRQS_H - -/* - * IOP80331 chipset interrupts - */ -#define IRQ_IOP33X_DMA0_EOT 0 -#define IRQ_IOP33X_DMA0_EOC 1 -#define IRQ_IOP33X_DMA1_EOT 2 -#define IRQ_IOP33X_DMA1_EOC 3 -#define IRQ_IOP33X_AA_EOT 6 -#define IRQ_IOP33X_AA_EOC 7 -#define IRQ_IOP33X_TIMER0 8 -#define IRQ_IOP33X_TIMER1 9 -#define IRQ_IOP33X_I2C_0 10 -#define IRQ_IOP33X_I2C_1 11 -#define IRQ_IOP33X_MSG 12 -#define IRQ_IOP33X_MSGIBQ 13 -#define IRQ_IOP33X_ATU_BIST 14 -#define IRQ_IOP33X_PERFMON 15 -#define IRQ_IOP33X_CORE_PMU 16 -#define IRQ_IOP33X_XINT0 24 -#define IRQ_IOP33X_XINT1 25 -#define IRQ_IOP33X_XINT2 26 -#define IRQ_IOP33X_XINT3 27 -#define IRQ_IOP33X_XINT8 32 -#define IRQ_IOP33X_XINT9 33 -#define IRQ_IOP33X_XINT10 34 -#define IRQ_IOP33X_XINT11 35 -#define IRQ_IOP33X_XINT12 36 -#define IRQ_IOP33X_XINT13 37 -#define IRQ_IOP33X_XINT14 38 -#define IRQ_IOP33X_XINT15 39 -#define IRQ_IOP33X_UART0 51 -#define IRQ_IOP33X_UART1 52 -#define IRQ_IOP33X_PBIE 53 -#define IRQ_IOP33X_ATU_CRW 54 -#define IRQ_IOP33X_ATU_ERR 55 -#define IRQ_IOP33X_MCU_ERR 56 -#define IRQ_IOP33X_DMA0_ERR 57 -#define IRQ_IOP33X_DMA1_ERR 58 -#define IRQ_IOP33X_AA_ERR 60 -#define IRQ_IOP33X_MSG_ERR 62 -#define IRQ_IOP33X_HPI 63 - -#define NR_IRQS 64 - - -#endif diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h deleted file mode 100644 index d798d83c83a..00000000000 --- a/include/asm-arm/arch-iop33x/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - - -#endif diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h deleted file mode 100644 index 00dd07ece26..00000000000 --- a/include/asm-arm/arch-iop33x/system.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - *IOP3XX_PCSR = 0x30; - - /* Jump into ROM at address 0 */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-iop33x/time.h b/include/asm-arm/arch-iop33x/time.h deleted file mode 100644 index 4ac4d7664f8..00000000000 --- a/include/asm-arm/arch-iop33x/time.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _IOP33X_TIME_H_ -#define _IOP33X_TIME_H_ -#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0 -#endif diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h deleted file mode 100644 index 75a001e93da..00000000000 --- a/include/asm-arm/arch-iop33x/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/timex.h - * - * IOP3xx architecture timex specifications - */ - -#include - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h deleted file mode 100644 index 34d9e8e8287..00000000000 --- a/include/asm-arm/arch-iop33x/uncompress.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/uncompress.h - */ - -#include -#include -#include -#include - -static volatile u32 *uart_base; - -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - uart_base[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - if (machine_is_iq80331() || machine_is_iq80332()) - uart_base = (volatile u32 *)IOP33X_UART0_PHYS; - else - uart_base = (volatile u32 *)0xfe800000; -} - -/* - * nothing to do - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h deleted file mode 100644 index 66f545a7f4f..00000000000 --- a/include/asm-arm/arch-iop33x/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000 diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S deleted file mode 100644 index bc8b3965479..00000000000 --- a/include/asm-arm/arch-ixp2000/debug-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/include/asm-arm/arch-ixp2000/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc0000000 @ Physical base - movne \rx, #0xfe000000 @ virtual base - orrne \rx, \rx, #0x00f00000 - orr \rx, \rx, #0x00030000 -#ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 -#endif - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h deleted file mode 100644 index 548d8dc507e..00000000000 --- a/include/asm-arm/arch-ixp2000/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/dma.h - * - * Copyright (C) 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h deleted file mode 100644 index 42f3c28dc5c..00000000000 --- a/include/asm-arm/arch-ixp2000/enp2611.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/enp2611.h - * - * Register and other defines for Radisys ENP-2611 - * - * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The - * original version carries the following notices: - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ENP2611_H -#define __ENP2611_H - -#define ENP2611_CALEB_PHYS_BASE 0xc5000000 -#define ENP2611_CALEB_VIRT_BASE 0xfe000000 -#define ENP2611_CALEB_SIZE 0x00100000 - -#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000 -#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000 -#define ENP2611_PM3386_0_SIZE 0x00100000 - -#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000 -#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000 -#define ENP2611_PM3386_1_SIZE 0x00100000 - -#define ENP2611_GPIO_SCL 7 -#define ENP2611_GPIO_SDA 6 - -#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4 -#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3 -#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2 -#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1 -#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0 - - -#endif diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S deleted file mode 100644 index 11d512ad594..00000000000 --- a/include/asm-arm/arch-ixp2000/entry-macro.S +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/entry-macro.S - * - * Low-level IRQ helper macros for IXP2000-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \irqnr, #0x0 @clear out irqnr as default - mov \base, #0xfe000000 - orr \base, \base, #0x00e00000 - orr \base, \base, #0x08 - ldr \irqstat, [\base] @ get interrupts - - cmp \irqstat, #0 - beq 1001f - - clz \irqnr, \irqstat - mov \base, #31 - subs \irqnr, \base, \irqnr - - /* - * We handle PCIA and PCIB here so we don't have an - * extra layer of code just to check these two bits. - */ - cmp \irqnr, #IRQ_IXP2000_PCI - bne 1001f - - mov \base, #0xfe000000 - orr \base, \base, #0x00c00000 - orr \base, \base, #0x00000100 - orr \base, \base, #0x00000058 - ldr \irqstat, [\base] - - mov \tmp, #(1<<26) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIA - bne 1001f - - mov \tmp, #(1<<27) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIB - -1001: - .endm - diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h deleted file mode 100644 index 03cbbe1fd9d..00000000000 --- a/include/asm-arm/arch-ixp2000/gpio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/gpio.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software, you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * IXP2000 GPIO in/out, edge/level detection for IRQs: - * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High - * or both Falling-edge and Rising-edge. - * This must be called *before* the corresponding IRQ is registerd. - * Use this instead of directly setting the GPIO registers. - * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) - */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#ifndef __ASSEMBLY__ - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#define IXP2000_GPIO_LOW 0 -#define IXP2000_GPIO_HIGH 1 - -extern void gpio_line_config(int line, int direction); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value == IXP2000_GPIO_HIGH) { - ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); - } else if (value == IXP2000_GPIO_LOW) { - ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); - } -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/include/asm-arm/arch-ixp2000/hardware.h deleted file mode 100644 index e7ea781c48a..00000000000 --- a/include/asm-arm/arch-ixp2000/hardware.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/hardware.h - * - * Hardware definitions for IXP2400/2800 based systems - * - * Original Author: Naeem M Afzal - * - * Maintainer: Deepak Saxena - * - * Copyright (C) 2001-2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ - -/* - * This needs to be platform-specific? - */ -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 - -#include "ixp2000-regs.h" /* Chipset Registers */ - -#define pcibios_assign_all_busses() 0 - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific bits - */ -#include "enp2611.h" /* ENP-2611 */ -#include "ixdp2x00.h" /* IXDP2400/2800 */ -#include "ixdp2x01.h" /* IXDP2401/2801 */ - -#endif /* _ASM_ARCH_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h deleted file mode 100644 index 5dc1d25dcb4..00000000000 --- a/include/asm-arm/arch-ixp2000/io.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/io.h - * - * Original Author: Naeem M Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyrgiht (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff -#define __mem_pci(a) (a) - -/* - * The A? revisions of the IXP2000s assert byte lanes for PCI I/O - * transactions the other way round (MEM transactions don't have this - * issue), so if we want to support those models, we need to override - * the standard I/O functions. - * - * B0 and later have a bit that can be set to 1 to get the proper - * behavior for I/O transactions, which then allows us to use the - * standard I/O functions. This is what we do if the user does not - * explicitly ask for support for pre-B0. - */ -#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO -#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) - -#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) - -#define outb(v,p) __raw_writeb((v),alignb(___io(p))) -#define outw(v,p) __raw_writew((v),alignw(___io(p))) -#define outl(v,p) __raw_writel((v),___io(p)) - -#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; }) -#define inw(p) \ - ({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; }) -#define inl(p) \ - ({ unsigned int __v = (__raw_readl(___io(p))); __v; }) - -#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l) -#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l) -#define outsl(p,d,l) __raw_writesl(___io(p),d,l) - -#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l) -#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) -#define insl(p,d,l) __raw_readsl(___io(p),d,l) - -#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) - -#define ioread8(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readb(alignb(p)); \ - } else { \ - __v = __raw_readb(p); \ - } \ - \ - __v; \ - }) \ - -#define ioread16(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readw(alignw(p)); \ - } else { \ - __v = le16_to_cpu(__raw_readw(p)); \ - } \ - \ - __v; \ - }) - -#define ioread32(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readl(p); \ - } else { \ - __v = le32_to_cpu(__raw_readl(p)); \ - } \ - \ - __v; \ - }) - -#define iowrite8(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writeb((v), alignb(p)); \ - } else { \ - __raw_writeb((v), p); \ - } \ - }) - -#define iowrite16(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writew((v), alignw(p)); \ - } else { \ - __raw_writew(cpu_to_le16(v), p); \ - } \ - }) - -#define iowrite32(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writel((v), p); \ - } else { \ - __raw_writel(cpu_to_le32(v), p); \ - } \ - }) - -#define ioport_map(port, nr) ___io(port) - -#define ioport_unmap(addr) -#else -#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) -#endif - - -#endif diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h deleted file mode 100644 index 62f09c7ff42..00000000000 --- a/include/asm-arm/arch-ixp2000/irqs.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/irqs.h - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IRQS_H -#define _IRQS_H - -/* - * Do NOT add #ifdef MACHINE_FOO in here. - * Simpy add your machine IRQs here and increase NR_IRQS if needed to - * hold your machine's IRQ table. - */ - -/* - * Some interrupt numbers go unused b/c the IRQ mask/ummask/status - * register has those bit reserved. We just mark those interrupts - * as invalid and this allows us to do mask/unmask with a single - * shift operation instead of having to map the IRQ number to - * a HW IRQ number. - */ -#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */ -#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/ -#define IRQ_IXP2000_UART 2 -#define IRQ_IXP2000_GPIO 3 -#define IRQ_IXP2000_TIMER1 4 -#define IRQ_IXP2000_TIMER2 5 -#define IRQ_IXP2000_TIMER3 6 -#define IRQ_IXP2000_TIMER4 7 -#define IRQ_IXP2000_PMU 8 -#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */ -#define IRQ_IXP2000_DMA1 10 -#define IRQ_IXP2000_DMA2 11 -#define IRQ_IXP2000_DMA3 12 -#define IRQ_IXP2000_PCI_DOORBELL 13 -#define IRQ_IXP2000_ME_ATTN 14 -#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */ -#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */ -#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */ -#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */ -#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */ -#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */ -#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */ -#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */ -#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */ - -/* define generic GPIOs */ -#define IRQ_IXP2000_GPIO0 32 -#define IRQ_IXP2000_GPIO1 33 -#define IRQ_IXP2000_GPIO2 34 -#define IRQ_IXP2000_GPIO3 35 -#define IRQ_IXP2000_GPIO4 36 -#define IRQ_IXP2000_GPIO5 37 -#define IRQ_IXP2000_GPIO6 38 -#define IRQ_IXP2000_GPIO7 39 - -/* split off the 2 PCI sources */ -#define IRQ_IXP2000_PCIA 40 -#define IRQ_IXP2000_PCIB 41 - -/* Int sources from IRQ_ERROR_STATUS */ -#define IRQ_IXP2000_DRAM0_MIN_ERR 42 -#define IRQ_IXP2000_DRAM0_MAJ_ERR 43 -#define IRQ_IXP2000_DRAM1_MIN_ERR 44 -#define IRQ_IXP2000_DRAM1_MAJ_ERR 45 -#define IRQ_IXP2000_DRAM2_MIN_ERR 46 -#define IRQ_IXP2000_DRAM2_MAJ_ERR 47 -/* 48-57 reserved */ -#define IRQ_IXP2000_SRAM0_ERR 58 -#define IRQ_IXP2000_SRAM1_ERR 59 -#define IRQ_IXP2000_SRAM2_ERR 60 -#define IRQ_IXP2000_SRAM3_ERR 61 -/* 62-65 reserved */ -#define IRQ_IXP2000_MEDIA_ERR 66 -#define IRQ_IXP2000_PCI_ERR 67 -#define IRQ_IXP2000_SP_INT 68 - -#define NR_IXP2000_IRQS 69 - -#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x)) - -#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS)) - -#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) -#define IXP2000_VALID_ERR_IRQ_MASK (\ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) ) - -/* - * This allows for all the on-chip sources plus up to 32 CPLD based - * IRQs. Should be more than enough. - */ -#define IXP2000_BOARD_IRQS 32 -#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS) - - -/* - * IXDP2400 specific IRQs - */ -#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7) - -#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1) -#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS - -/* IXDP2800 specific IRQs */ -#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5) - -#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1) -#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS - -/* - * IRQs on both IXDP2x01 boards - */ -#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7) -#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8) -#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16) -#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17) -#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18) -#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19) -#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21) -#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22) -#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24) -#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25) -#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26) - -#define IXDP2X01_VALID_IRQ_MASK ( \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) ) - -/* - * IXDP2401 specific IRQs - */ -#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1) - -#define IXDP2401_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546)) - -/* - * IXDP2801-specific IRQs - */ -#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27) -#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28) - -#define IXDP2801_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF)) - -#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1) - -#endif /*_IRQS_H*/ diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h deleted file mode 100644 index 546e2e8e27b..00000000000 --- a/include/asm-arm/arch-ixp2000/ixdp2x00.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/ixdp2x00.h - * - * Register and other defines for IXDP2[48]00 platforms - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXDP2X00_H_ -#define _IXDP2X00_H_ - -/* - * On board CPLD memory map - */ -#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000 -#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X00_CPLD_SIZE 0x00100000 - - -#define IXDP2X00_CPLD_REG(x) \ - (volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x) - -/* - * IXDP2400 CPLD registers - */ -#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0) -#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4) -#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8) -#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc) -#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10) -#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14) -#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18) -#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48) - -/* - * IXDP2800 CPLD registers - */ -#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0) -#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140) - - -#define IXDP2X00_GPIO_I2C_ENABLE 0x02 -#define IXDP2X00_GPIO_SCL 0x07 -#define IXDP2X00_GPIO_SDA 0x06 - -/* - * PCI devfns for on-board devices. We need these to be able to - * properly translate IRQs and for device removal. - */ -#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */ -#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */ -#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */ -#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */ -#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */ -#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */ - -#ifndef __ASSEMBLY__ -/* - * The master NPU is always PCI master. - */ -static inline unsigned int ixdp2x00_master_npu(void) -{ - return !!ixp2000_is_pcimaster(); -} - -/* - * Helper functions used by ixdp2400 and ixdp2800 specific code - */ -void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long); -void ixdp2x00_slave_pci_postinit(void); -void ixdp2x00_init_machine(void); -void ixdp2x00_map_io(void); - -#endif - -#endif /*_IXDP2X00_H_ */ diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h deleted file mode 100644 index c6d51426e98..00000000000 --- a/include/asm-arm/arch-ixp2000/ixdp2x01.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/ixdp2x01.h - * - * Platform definitions for IXDP2X01 && IXDP2801 systems - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * Based on original code Copyright (c) 2002-2003 Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __IXDP2X01_H__ -#define __IXDP2X01_H__ - -#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000 -#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X01_CPLD_REGION_SIZE 0x00100000 - -#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg) -#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg) - -#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40) -#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40) - -#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60) -#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60) - -#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80) -#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16) - -#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00) -#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08) -#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C) -#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10) -#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG -#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14) - -#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20) - -#define IXDP2X01_CPLD_FLASH_INTERN 0x8000 -#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF -#define IXDP2X01_FLASH_WINDOW_BITS 25 -#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS) -#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1) - -#define IXDP2X01_UART_CLK 1843200 - -#define IXDP2X01_GPIO_I2C_ENABLE 0x02 -#define IXDP2X01_GPIO_SCL 0x07 -#define IXDP2X01_GPIO_SDA 0x06 - -#endif /* __IXDP2x01_H__ */ diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h deleted file mode 100644 index ccae4bec92c..00000000000 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ /dev/null @@ -1,457 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/ixp2000-regs.h - * - * Chipset register definitions for IXP2400/2800 based systems. - * - * Original Author: Naeem Afzal - * - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXP2000_REGS_H_ -#define _IXP2000_REGS_H_ - -/* - * IXP2000 linux memory map: - * - * virt phys size - * fb000000 db000000 16M PCI CFG1 - * fc000000 da000000 16M PCI CFG0 - * fd000000 d8000000 16M PCI I/O - * fe[0-7]00000 8M per-platform mappings - * fe900000 80000000 1M SRAM #0 (first MB) - * fea00000 cb400000 1M SCRATCH ring get/put - * feb00000 c8000000 1M MSF - * fec00000 df000000 1M PCI CSRs - * fed00000 de000000 1M PCI CREG - * fee00000 d6000000 1M INTCTL - * fef00000 c0000000 1M CAP - */ - -/* - * Static I/O regions. - * - * Most of the registers are clumped in 4K regions spread throughout - * the 0xc0000000 -> 0xc0100000 address range, but we just map in - * the whole range using a single 1 MB section instead of small - * 4K pages. This has two advantages for us: - * - * 1) We use only one TLB entry for large number of on-chip I/O devices. - * - * 2) We can easily set the Section attributes to XCB=101 on the IXP2400 - * as required per erratum #66. We accomplish this by using a - * new MT_IXP2000_DEVICE memory type with the bits set as required. - * - * CAP stands for CSR Access Proxy. - * - * If you change the virtual address of this mapping, please propagate - * the change to arch/arm/kernel/debug.S, which hardcodes the virtual - * address of the UART located in this region. - */ - -#define IXP2000_CAP_PHYS_BASE 0xc0000000 -#define IXP2000_CAP_VIRT_BASE 0xfef00000 -#define IXP2000_CAP_SIZE 0x00100000 - -/* - * Addresses for specific on-chip peripherals. - */ -#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000 -#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000 -#define IXP2000_UART_PHYS_BASE 0xc0030000 -#define IXP2000_UART_VIRT_BASE 0xfef30000 -#define IXP2000_TIMER_VIRT_BASE 0xfef20000 -#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000 -#define IXP2000_GPIO_VIRT_BASE 0xfef10000 - -/* - * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual - * addresses of the INTCTL and PCI_CSR mappings are hardcoded in - * entry-macro.S, so if you ever change these please propagate - * the change. - */ -#define IXP2000_INTCTL_PHYS_BASE 0xd6000000 -#define IXP2000_INTCTL_VIRT_BASE 0xfee00000 -#define IXP2000_INTCTL_SIZE 0x00100000 - -#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000 -#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000 -#define IXP2000_PCI_CREG_SIZE 0x00100000 - -#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000 -#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 -#define IXP2000_PCI_CSR_SIZE 0x00100000 - -#define IXP2000_MSF_PHYS_BASE 0xc8000000 -#define IXP2000_MSF_VIRT_BASE 0xfeb00000 -#define IXP2000_MSF_SIZE 0x00100000 - -#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000 -#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000 -#define IXP2000_SCRATCH_RING_SIZE 0x00100000 - -#define IXP2000_SRAM0_PHYS_BASE 0x80000000 -#define IXP2000_SRAM0_VIRT_BASE 0xfe900000 -#define IXP2000_SRAM0_SIZE 0x00100000 - -#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 -#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 -#define IXP2000_PCI_IO_SIZE 0x01000000 - -#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000 -#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000 -#define IXP2000_PCI_CFG0_SIZE 0x01000000 - -#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000 -#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000 -#define IXP2000_PCI_CFG1_SIZE 0x01000000 - -/* - * Timers - */ -#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x))) -/* Timer control */ -#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00) -#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04) -#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08) -#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c) -/* Store initial value */ -#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10) -#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14) -#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18) -#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c) -/* Read current value */ -#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20) -#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24) -#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28) -#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c) -/* Clear associated timer interrupt */ -#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30) -#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34) -#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38) -#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c) -/* Timer watchdog enable for T4 */ -#define IXP2000_TWDE IXP2000_TIMER_REG(0x40) - -#define WDT_ENABLE 0x00000001 -#define TIMER_DIVIDER_256 0x00000008 -#define TIMER_ENABLE 0x00000080 -#define IRQ_MASK_TIMER1 (1 << 4) - -/* - * Interrupt controller registers - */ -#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x)) -#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08) -#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18) -#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14) -#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24) -#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c) -#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30) -#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34) -#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60) -#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64) -#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68) -#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c) -#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80) -#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84) -#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88) -#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c) -#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0) -#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4) -#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8) -#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec) -#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100) -#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104) -#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108) -#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c) -#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160) -#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164) -#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168) -#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c) -#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180) -#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184) -#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188) -#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c) - -/* - * Mask of valid IRQs in the 32-bit IRQ register. We use - * this to mark certain IRQs as being invalid. - */ -#define IXP2000_VALID_IRQ_MASK 0x0f0fffff - -/* - * PCI config register access from core - */ -#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x)) -#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04) -#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10) -#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14) -#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18) - -/* - * PCI CSRs - */ -#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x)) - -/* - * PCI outbound interrupts - */ -#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30) -#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34) -/* - * PCI communications - */ -#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50) -#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54) -#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58) -#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C) -#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60) -#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64) -#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70) -#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74) - -/* - * DMA engines - */ -#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80) -#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84) -#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88) -#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C) -#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90) -#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94) -#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0) -#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4) -#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8) -#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC) -#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0) -#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4) -#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0) -#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4) -#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8) -#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC) -#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0) -#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4) -#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0) -/* - * Size masks for BARs - */ -#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC) -#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100) -/* - * Control and uEngine related - */ -#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C) -#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140) -#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148) -#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C) -#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150) -#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154) -/* - * Inbound PCI interrupt control - */ -#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158) -#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C) - -#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */ -#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */ -#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */ - -/* These are from the IRQ register in the PCI ISR register */ -#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */ -#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ -#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ -#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ - -#define IXP2000_PCI_RST_REL (1 << 2) -#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) -#define CFG_PCI_BOOT_HOST (1 << 2) -#define CFG_BOOT_PROM (1 << 1) - -/* - * SlowPort CSRs - * - * The slowport is used to access things like flash, SONET framer control - * ports, slave microprocessors, CPLDs, and others of chip memory mapped - * peripherals. - */ -#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x)) - -#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00) -#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04) -#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08) -#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c) -#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10) -#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14) -#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18) -#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C) -#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20) -#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24) -#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28) - -/* - * CCR values. - * The CCR configures the clock division for the slowport interface. - */ -#define SLOWPORT_CCR_DIV_1 0x00 -#define SLOWPORT_CCR_DIV_2 0x01 -#define SLOWPORT_CCR_DIV_4 0x02 -#define SLOWPORT_CCR_DIV_6 0x03 -#define SLOWPORT_CCR_DIV_8 0x04 -#define SLOWPORT_CCR_DIV_10 0x05 -#define SLOWPORT_CCR_DIV_12 0x06 -#define SLOWPORT_CCR_DIV_14 0x07 -#define SLOWPORT_CCR_DIV_16 0x08 -#define SLOWPORT_CCR_DIV_18 0x09 -#define SLOWPORT_CCR_DIV_20 0x0a -#define SLOWPORT_CCR_DIV_22 0x0b -#define SLOWPORT_CCR_DIV_24 0x0c -#define SLOWPORT_CCR_DIV_26 0x0d -#define SLOWPORT_CCR_DIV_28 0x0e -#define SLOWPORT_CCR_DIV_30 0x0f - -/* - * PCR values. PCR configure the mode of the interface. - */ -#define SLOWPORT_MODE_FLASH 0x00 -#define SLOWPORT_MODE_LUCENT 0x01 -#define SLOWPORT_MODE_PMC_SIERRA 0x02 -#define SLOWPORT_MODE_INTEL_UP 0x03 -#define SLOWPORT_MODE_MOTOROLA_UP 0x04 - -/* - * ADC values. Defines data and address bus widths. - */ -#define SLOWPORT_ADDR_WIDTH_8 0x00 -#define SLOWPORT_ADDR_WIDTH_16 0x01 -#define SLOWPORT_ADDR_WIDTH_24 0x02 -#define SLOWPORT_ADDR_WIDTH_32 0x03 -#define SLOWPORT_DATA_WIDTH_8 0x00 -#define SLOWPORT_DATA_WIDTH_16 0x10 -#define SLOWPORT_DATA_WIDTH_24 0x20 -#define SLOWPORT_DATA_WIDTH_32 0x30 - -/* - * Masks and shifts for various fields in the WTC and RTC registers. - */ -#define SLOWPORT_WRTC_MASK_HD 0x0003 -#define SLOWPORT_WRTC_MASK_PW 0x003c -#define SLOWPORT_WRTC_MASK_SU 0x03c0 - -#define SLOWPORT_WRTC_SHIFT_HD 0x00 -#define SLOWPORT_WRTC_SHIFT_SU 0x02 -#define SLOWPORT_WRTC_SHFIT_PW 0x06 - - -/* - * GPIO registers & GPIO interface. - */ -#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x))) -#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00) -#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04) -#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08) -#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c) -#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10) -#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14) -#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18) -#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c) -#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20) -#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24) -#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28) -#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c) -#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30) -#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34) -#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38) -#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c) -#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40) - -/* - * "Global" registers...whatever that's supposed to mean. - */ -#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00) -#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x)) - -#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000 -#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000 -#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00 -#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200 -#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100 -#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000 -#define IXP2000_MAJ_REV_MASK 0x000000F0 -#define IXP2000_MIN_REV_MASK 0x0000000F -#define IXP2000_PROD_ID_MASK 0xFFFFFFFF - -#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) -#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) -#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) -#define IXP2000_RESET0 GLOBAL_REG(0x0c) -#define IXP2000_RESET1 GLOBAL_REG(0x10) -#define IXP2000_CCR GLOBAL_REG(0x14) -#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18) - -#define RSTALL (1 << 16) -#define WDT_RESET_ENABLE 0x01000000 - - -/* - * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF - * units, but the registers that differ between the two don't overlap, - * so we can have one register list for both. - */ -#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) -#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) -#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) -#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) -#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) -#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) -#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) -#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) -#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) -#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) -#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) -#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) -#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) -#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) -#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) -#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) -#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) -#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) -#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) -#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) -#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) -#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) -#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) -#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) -#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) -#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) -#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) -#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) -#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) -#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) - - -#endif /* _IXP2000_H_ */ diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h deleted file mode 100644 index 21e1de51e3f..00000000000 --- a/include/asm-arm/arch-ixp2000/memory.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/memory.h - * - * Copyright (c) 2002 Intel Corp. - * Copyright (c) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#include - -#define __virt_to_bus(v) \ - (((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0))) - -#define __bus_to_virt(b) \ - __phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0))) - -#endif - diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h deleted file mode 100644 index a66317ab207..00000000000 --- a/include/asm-arm/arch-ixp2000/platform.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -/* - * On the IXP2400, we can't use XCB=000 due to chip bugs. We use - * XCB=101 instead, but that makes all I/O accesses bufferable. This - * is not a problem in general, but we do have to be slightly more - * careful because I/O writes are no longer automatically flushed out - * of the write buffer. - * - * In cases where we want to make sure that a write has been flushed - * out of the write buffer before we proceed, for example when masking - * a device interrupt before re-enabling IRQs in CPSR, we can use this - * function, ixp2000_reg_wrb, which performs a write, a readback, and - * issues a dummy instruction dependent on the value of the readback - * (mov rX, rX) to make sure that the readback has completed before we - * continue. - */ -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - unsigned long dummy; - - *((volatile unsigned long *)reg) = val; - - dummy = *((volatile unsigned long *)reg); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - -/* - * Boards may multiplex different devices on the 2nd channel of - * the slowport interface that each need different configuration - * settings. For example, the IXDP2400 uses channel 2 on the interface - * to access the CPLD, the switch fabric card, and the media card. Each - * one needs a different mode so drivers must save/restore the mode - * before and after each operation. - * - * acquire_slowport(&your_config); - * ... - * do slowport operations - * ... - * release_slowport(); - * - * Note that while you have the slowport, you are holding a spinlock, - * so your code should be written as if you explicitly acquired a lock. - * - * The configuration only affects device 2 on the slowport, so the - * MTD map driver does not acquire/release the slowport. - */ -struct slowport_cfg { - unsigned long CCR; /* Clock divide */ - unsigned long WTC; /* Write Timing Control */ - unsigned long RTC; /* Read Timing Control */ - unsigned long PCR; /* Protocol Control Register */ - unsigned long ADC; /* Address/Data Width Control */ -}; - - -void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *); -void ixp2000_release_slowport(struct slowport_cfg *); - -/* - * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires - * tweaking of addresses in the MTD driver. - */ -static inline unsigned ixp2000_has_broken_slowport(void) -{ - unsigned long id = *IXP2000_PRODUCT_ID; - unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK | - IXP2000_MIN_PROD_TYPE_MASK); - return (((id_prod == - /* fixed in IXP2400-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2400)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2800-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2800)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2850-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2850)) && - ((id & IXP2000_MAJ_REV_MASK) == 0))); -} - -static inline unsigned int ixp2000_has_flash(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM)); -} - -static inline unsigned int ixp2000_is_pcimaster(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST)); -} - -void ixp2000_map_io(void); -void ixp2000_uart_init(void); -void ixp2000_init_irq(void); -void ixp2000_init_time(unsigned long); -unsigned long ixp2000_gettimeoffset(void); - -struct pci_sys_data; - -u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where); -void ixp2000_pci_preinit(void); -int ixp2000_pci_setup(int, struct pci_sys_data*); -struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*); -int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *); -int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32); - -/* - * Several of the IXP2000 systems have banked flash so we need to extend the - * flash_platform_data structure with some private pointers - */ -struct ixp2000_flash_data { - struct flash_platform_data *platform_data; - int nr_banks; - unsigned long (*bank_setup)(unsigned long); -}; - -struct ixp2000_i2c_pins { - unsigned long sda_pin; - unsigned long scl_pin; -}; - - -#endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h deleted file mode 100644 index 8731dd36e45..00000000000 --- a/include/asm-arm/arch-ixp2000/system.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/system.h - * - * Copyright (C) 2002 Intel Corp. - * Copyricht (C) 2003-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - local_irq_disable(); - - /* - * Reset flash banking register so that we are pointing at - * RedBoot bank. - */ - if (machine_is_ixdp2401()) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, - ((0 >> IXDP2X01_FLASH_WINDOW_BITS) - | IXDP2X01_CPLD_FLASH_INTERN)); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff); - } - - /* - * On IXDP2801 we need to write this magic sequence to the CPLD - * to cause a complete reset of the CPU and all external devices - * and move the flash bank register back to 0. - */ - if (machine_is_ixdp2801() || machine_is_ixdp28x5()) { - unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; - - reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); - ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000); - } - - ixp2000_reg_wrb(IXP2000_RESET0, RSTALL); -} diff --git a/include/asm-arm/arch-ixp2000/timex.h b/include/asm-arm/arch-ixp2000/timex.h deleted file mode 100644 index b78a183d469..00000000000 --- a/include/asm-arm/arch-ixp2000/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/timex.h - * - * IXP2000 architecture timex specifications - */ - - -/* - * Default clock is 50MHz APB, but platform code can override this - */ -#define CLOCK_TICK_RATE 50000000 - - diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h deleted file mode 100644 index f66b408f363..00000000000 --- a/include/asm-arm/arch-ixp2000/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/uncompress.h - * - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include - -#define UART_BASE 0xc0030000 - -#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x)) - -#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */ -#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/ -#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/ -#define UARTIER PHYS(0x04) /* Interrupt enable reg */ -#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/ -#define UARTLCR PHYS(0x0c) /* Control reg */ -#define UARTSR PHYS(0x14) /* Status reg */ - - -static inline void putc(int c) -{ - int j = 0x1000; - - while (--j && !(*UARTSR & UART_LSR_THRE)) - barrier(); - - *UARTDR = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h deleted file mode 100644 index 275136963a0..00000000000 --- a/include/asm-arm/arch-ixp2000/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/vmalloc.h - * - * Author: Naeem Afzal - * - * Copyright 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_END 0xfb000000 diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S deleted file mode 100644 index 2b25e640247..00000000000 --- a/include/asm-arm/arch-ixp23xx/debug-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical - ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual -#ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 -#endif - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h deleted file mode 100644 index 2f4335e3b83..00000000000 --- a/include/asm-arm/arch-ixp23xx/dma.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/dma.h - */ diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S deleted file mode 100644 index ec9dd6fc2d0..00000000000 --- a/include/asm-arm/arch-ixp23xx/entry-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/entry-macro.S - */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) - ldr \irqnr, [\irqnr] @ get interrupt number - cmp \irqnr, #0x0 @ spurious interrupt ? - movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits - subne \irqnr, \irqnr, #1 @ convert to 0 based - -#if 0 - cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH - bne 1001f - mov \irqnr, #IRQ_IXP23XX_INTA - - ldr \irqnr, =0xf5000030 - - mov \tmp, #(1<<26) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTB - - mov \tmp, #(1<<27) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTA -1001: -#endif - .endm diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h deleted file mode 100644 index c0010d21a68..00000000000 --- a/include/asm-arm/arch-ixp23xx/hardware.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/hardware.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * Copyricht (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Hardware definitions for IXP23XX based systems - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* PCI IO info */ -#define PCIO_BASE IXP23XX_PCI_IO_VIRT -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0xe0000000 - -#include "ixp23xx.h" - -#define pcibios_assign_all_busses() 0 - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific headers - */ -#include "ixdp2351.h" - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h deleted file mode 100644 index 66f5bafc315..00000000000 --- a/include/asm-arm/arch-ixp23xx/io.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/io.h - * - * Original Author: Naeem M Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2003-2005 Intel Corp. - * Copyright (C) 2005 MontaVista Software, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) -#define __mem_pci(a) (a) - -#include /* For BUG */ - -static inline void __iomem * -ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype) -{ - if (addr >= IXP23XX_PCI_MEM_START && - addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) { - if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) - return NULL; - - return (void __iomem *) - ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT); - } - - return __arm_ioremap(addr, size, mtype); -} - -static inline void -ixp23xx_iounmap(void __iomem *addr) -{ - if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) && - (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE)) - return; - - __iounmap(addr); -} - -#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f) -#define __arch_iounmap(a) ixp23xx_iounmap(a) - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h deleted file mode 100644 index 27c58089895..00000000000 --- a/include/asm-arm/arch-ixp23xx/irqs.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/irqs.h - * - * IRQ definitions for IXP23XX based systems - * - * Author: Naeem Afzal - * - * Copyright (C) 2003-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1 -#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS - - -#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */ -#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */ -#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */ -#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */ -#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */ -#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */ -#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */ -#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */ -#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */ -#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */ -#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */ -#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */ -#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */ -#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */ -#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */ -#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */ -#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */ -#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */ -#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */ -#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */ -#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */ -#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */ -#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */ -#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */ -#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */ -#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */ -#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */ -#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */ -#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */ -#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */ -#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */ -#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */ -#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */ -#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */ -#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */ -#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */ -#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */ -#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */ -#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */ -#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */ -#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */ -#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */ - -#define NUM_IXP23XX_RAW_IRQS 120 - -#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */ -#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */ - -#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1) - -/* - * We default to 32 per-board IRQs. Increase this number if you need - * more, but keep it realistic. - */ -#define NR_IXP23XX_MACH_IRQS 32 - -#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS) - -#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq)) - - -/* - * IXDP2351-specific interrupts - */ - -/* - * External PCI interrupts signaled through INTB - * - */ -#define IXDP2351_INTB_IRQ_BASE 0 -#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0) -#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1) -#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2) -#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3) -#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4) -#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5) -#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6) -#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7) -#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8) - -#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0)) -#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq)) -#define IXDP2351_INTB_IRQ_VALID 0x01FF -#define IXDP2351_INTB_IRQ_NUM 16 - -/* - * Other external interrupts signaled through INTA - */ -#define IXDP2351_INTA_IRQ_BASE 16 -#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16) -#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17) -#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18) -#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19) -#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20) -#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21) -#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24) -#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25) -#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26) -#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27) -#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28) -#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29) -#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30) -#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31) - -#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16)) -#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq)) -#define IXDP2351_INTA_IRQ_VALID 0xFF3F -#define IXDP2351_INTA_IRQ_NUM 16 - - -/* - * ADI RoadRunner IRQs - */ -#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA -#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB -#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11 -#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12 - -/* - * Put new board definitions here - */ - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/include/asm-arm/arch-ixp23xx/ixdp2351.h deleted file mode 100644 index d5e8a43d7bb..00000000000 --- a/include/asm-arm/arch-ixp23xx/ixdp2351.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/ixdp2351.h - * - * Register and other defines for IXDP2351 - * - * Copyright (c) 2002-2004 Intel Corp. - * Copytight (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_IXDP2351_H -#define __ASM_ARCH_IXDP2351_H - -/* - * NP module memory map - */ -#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE) -#define IXDP2351_NP_PHYS_SIZE 0x00100000 -#define IXDP2351_NP_VIRT_BASE 0xeff00000 - -#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE) -#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16) - -#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000) - -#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg)) - -#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00) -#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02) -#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04) - -/* - * Base board module memory map - */ - -#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE) -#define IXDP2351_BB_SIZE 0x01000000 -#define IXDP2351_BB_BASE_VIRT (0xee000000) - -#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset) - -#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0) -#define IXDP2351_NVRAM_SIZE (0x20000) - -#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP2351_BB_AREA_BASE(0x00020000) -#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0) -#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000) -#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000) -#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000) -#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000) - -/* - * On board CPLD registers - */ -#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg)) - -#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00) -#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04) - -#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA -#define IXDP2351_CPLD_RESET1_ENABLE 0x8000 - -#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08) -#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10) -#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14) -#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18) -#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C) -#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */ -#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */ -#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */ -#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */ -#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28) -#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C) - /* Interrupt bits are defined in irqs.h */ -#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30) -#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34) - -/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */ -/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */ -/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */ -/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */ -/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */ - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h deleted file mode 100644 index 3927b1d61b1..00000000000 --- a/include/asm-arm/arch-ixp23xx/ixp23xx.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/ixp23xx.h - * - * Register definitions for IXP23XX - * - * Copyright (C) 2003-2005 Intel Corporation. - * Copyright (C) 2005 MontaVista Software, Inc. - * - * Maintainer: Deepak Saxena - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IXP23XX_H -#define __ASM_ARCH_IXP23XX_H - -/* - * IXP2300 linux memory map: - * - * virt phys size - * fffd0000 a0000000 64K XSI2CPP_CSR - * fffc0000 c4000000 4K EXP_CFG - * fff00000 c8000000 64K PERIPHERAL - * fe000000 1c0000000 16M CAP_CSR - * fd000000 1c8000000 16M MSF_CSR - * fb000000 16M --- - * fa000000 1d8000000 32M PCI_IO - * f8000000 1da000000 32M PCI_CFG - * f6000000 1de000000 32M PCI_CREG - * f4000000 32M --- - * f0000000 1e0000000 64M PCI_MEM - * e[c-f]000000 per-platform mappings - */ - - -/**************************************************************************** - * Static mappings. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000 -#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000 -#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000 - -#define IXP23XX_EXP_CFG_PHYS 0xc4000000 -#define IXP23XX_EXP_CFG_VIRT 0xfffc0000 -#define IXP23XX_EXP_CFG_SIZE 0x00001000 - -#define IXP23XX_PERIPHERAL_PHYS 0xc8000000 -#define IXP23XX_PERIPHERAL_VIRT 0xfff00000 -#define IXP23XX_PERIPHERAL_SIZE 0x00010000 - -#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL -#define IXP23XX_CAP_CSR_VIRT 0xfe000000 -#define IXP23XX_CAP_CSR_SIZE 0x01000000 - -#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL -#define IXP23XX_MSF_CSR_VIRT 0xfd000000 -#define IXP23XX_MSF_CSR_SIZE 0x01000000 - -#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL -#define IXP23XX_PCI_IO_VIRT 0xfa000000 -#define IXP23XX_PCI_IO_SIZE 0x02000000 - -#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL -#define IXP23XX_PCI_CFG_VIRT 0xf8000000 -#define IXP23XX_PCI_CFG_SIZE 0x02000000 -#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT -#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000) - -#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL -#define IXP23XX_PCI_CREG_VIRT 0xf6000000 -#define IXP23XX_PCI_CREG_SIZE 0x02000000 -#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000) - -#define IXP23XX_PCI_MEM_START 0xe0000000 -#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL -#define IXP23XX_PCI_MEM_VIRT 0xf0000000 -#define IXP23XX_PCI_MEM_SIZE 0x04000000 - - -/**************************************************************************** - * XSI2CPP CSRs. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x))) -#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8) -#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19) -#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20) -#define IXP23XX_CPP2XSI_COH_OFF (1 << 21) - - -/**************************************************************************** - * Expansion Bus Config. - ****************************************************************************/ -#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x))) -#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00) -#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04) -#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08) -#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c) -#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10) -#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14) -#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18) -#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c) -#define IXP23XX_FLASH_WRITABLE (0x2) -#define IXP23XX_FLASH_BUS8 (0x1) - -#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20) -#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24) -#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21) -#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19) -#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18) -#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16) -#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14) -#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13) -#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12) -#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5) -#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4) -#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3) -#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2) -#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1) -#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0) - -#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) -#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) -#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34) - -#define IXP23XX_EXP_BUS_PHYS 0x90000000 -#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 - -#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000) -#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000) -#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000) -#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000) -#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000) -#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000) -#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000) -#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000) - - -/**************************************************************************** - * Peripherals. - ****************************************************************************/ -#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000) -#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000) -#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000) -#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000) -#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000) -#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000) -#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000) -#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000) -#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000) -#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000) -#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000) -#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000) -#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000) -#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000) - -#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000) -#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000) -#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000) -#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000) -#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000) -#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000) -#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000) -#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000) -#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000) -#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000) -#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000) -#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000) -#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000) -#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000) - - -/**************************************************************************** - * Interrupt controller. - ****************************************************************************/ -#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x))) -#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00) -#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04) -#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08) -#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c) -#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10) -#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14) -#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18) -#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c) -#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20) -#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24) -#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28) -#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c) -#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30) -#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34) -#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38) -#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c) -#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54 - - -/**************************************************************************** - * GPIO. - ****************************************************************************/ -#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x))) -#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00) -#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04) -#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08) -#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c) -#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10) -#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14) -#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18) -#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c) - -#define IXP23XX_GPIO_STYLE_MASK 0x7 -#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4 - -#define IXP23XX_GPIO_STYLE_SIZE 3 - - -/**************************************************************************** - * Timer. - ****************************************************************************/ -#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x))) -#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00) -#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04) -#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08) -#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c) -#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10) -#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14) -#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18) -#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c) -#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e -#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20) -#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24) -#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28) - -#define IXP23XX_TIMER_ENABLE (1 << 0) -#define IXP23XX_TIMER_ONE_SHOT (1 << 1) -/* Low order bits of reload value ignored */ -#define IXP23XX_TIMER_RELOAD_MASK (0x3) -#define IXP23XX_TIMER_DISABLED (0x0) -#define IXP23XX_TIMER1_INT_PEND (1 << 0) -#define IXP23XX_TIMER2_INT_PEND (1 << 1) -#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2) -#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3) -#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4) - - -/**************************************************************************** - * CAP CSRs. - ****************************************************************************/ -#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) -#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00) -#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) -#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) -#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) -#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10) -#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18) - -#define IXP23XX_ENABLE_WATCHDOG (1 << 24) -#define IXP23XX_SHPC_INIT_COMP (1 << 21) -#define IXP23XX_RST_ALL (1 << 16) -#define IXP23XX_RESET_PCI (1 << 2) -#define IXP23XX_PCI_UNIT_RESET (1 << 1) -#define IXP23XX_XSCALE_RESET (1 << 0) - -#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000) - - -/**************************************************************************** - * PCI CSRs. - ****************************************************************************/ -#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x))) -#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04) -#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14) -#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18) - - -#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x))) -#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030) -#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034) -#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc) -#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100) -#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c) -#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140) -#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148) -#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c) -#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154) -#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158) -#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c) -#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160) - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h deleted file mode 100644 index c3d906af9fe..00000000000 --- a/include/asm-arm/arch-ixp23xx/memory.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/memory.h - * - * Copyright (c) 2003-2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET (0x00000000) - - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#ifndef __ASSEMBLY__ - -#define __virt_to_bus(v) \ - ({ unsigned int ret; \ - ret = ((__virt_to_phys(v) - 0x00000000) + \ - (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \ - ret; }) - -#define __bus_to_virt(b) \ - ({ unsigned int data; \ - data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \ - __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); }) - -#define arch_is_coherent() 1 - -#endif - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h deleted file mode 100644 index db8aa304c93..00000000000 --- a/include/asm-arm/arch-ixp23xx/platform.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -struct pci_sys_data; - -void ixp23xx_map_io(void); -void ixp23xx_init_irq(void); -void ixp23xx_sys_init(void); -int ixp23xx_pci_setup(int, struct pci_sys_data *); -void ixp23xx_pci_preinit(void); -struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*); -void ixp23xx_pci_slave_init(void); - -extern struct sys_timer ixp23xx_timer; - -#define IXP23XX_UART_XTAL 14745600 - -#ifndef __ASSEMBLY__ -/* - * Is system memory on the XSI or CPP bus? - */ -static inline unsigned ixp23xx_cpp_boot(void) -{ - return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); -} -#endif - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h deleted file mode 100644 index 54e8a51475e..00000000000 --- a/include/asm-arm/arch-ixp23xx/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/system.h - * - * Copyright (C) 2003 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(); -#endif -} - -static inline void arch_reset(char mode) -{ - /* First try machine specific support */ - if (machine_is_ixdp2351()) { - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; - (void) *IXDP2351_CPLD_RESET1_REG; - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; - } - - /* Use on-chip reset capability */ - *IXP23XX_RESET0 |= IXP23XX_RST_ALL; -} diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h deleted file mode 100644 index f6828fdd288..00000000000 --- a/include/asm-arm/arch-ixp23xx/time.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/time.h - */ diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h deleted file mode 100644 index 516f72fe608..00000000000 --- a/include/asm-arm/arch-ixp23xx/timex.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/timex.h - * - * XScale architecture timex specifications - */ - -#define CLOCK_TICK_RATE 75000000 diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h deleted file mode 100644 index 16c1110f230..00000000000 --- a/include/asm-arm/arch-ixp23xx/uncompress.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/uncompress.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS) - -static inline void putc(char c) -{ - int j; - - for (j = 0; j < 0x1000; j++) { - if (UART_BASE[UART_LSR] & UART_LSR_THRE) - break; - barrier(); - } - - UART_BASE[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h deleted file mode 100644 index 9f256665854..00000000000 --- a/include/asm-arm/arch-ixp23xx/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/vmalloc.h - * - * Copyright (c) 2005 MontaVista Software, Inc. - * - * NPU mappings end at 0xf0000000 and we allocate 64MB for board - * specific static I/O. - */ - -#define VMALLOC_END (0xec000000) diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h deleted file mode 100644 index 88f053d6443..00000000000 --- a/include/asm-arm/arch-ixp4xx/avila.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/avila.h - * - * Gateworks Avila platform specific definitions - * - * Author: Michael-Luke Jones - * - * Based on ixdp425.h - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define AVILA_SDA_PIN 7 -#define AVILA_SCL_PIN 6 - -/* - * AVILA PCI IRQs - */ -#define AVILA_PCI_MAX_DEV 4 -#define LOFT_PCI_MAX_DEV 6 -#define AVILA_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define AVILA_PCI_INTA_PIN 11 -#define AVILA_PCI_INTB_PIN 10 -#define AVILA_PCI_INTC_PIN 9 -#define AVILA_PCI_INTD_PIN 8 - - diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h deleted file mode 100644 index 428b298afc1..00000000000 --- a/include/asm-arm/arch-ixp4xx/coyote.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/coyote.h - * - * ADI Engineering platform specific definitions - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -/* PCI controller GPIO to IRQ pin mappings */ -#define COYOTE_PCI_SLOT0_PIN 6 -#define COYOTE_PCI_SLOT1_PIN 11 - -#define COYOTE_PCI_SLOT0_DEVID 14 -#define COYOTE_PCI_SLOT1_DEVID 15 - -#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) -#define COYOTE_IDE_BASE_VIRT 0xFFFE1000 -#define COYOTE_IDE_REGION_SIZE 0x1000 - -#define COYOTE_IDE_DATA_PORT 0xFFFE10E0 -#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC -#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2 - diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h deleted file mode 100644 index 2fa3d6b8dbb..00000000000 --- a/include/asm-arm/arch-ixp4xx/cpu.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/cpu.h - * - * IXP4XX cpu type detection - * - * Copyright (C) 2007 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CPU_H__ -#define __ASM_ARCH_CPU_H__ - -extern unsigned int processor_id; -/* Processor id value in CP15 Register 0 */ -#define IXP425_PROCESSOR_ID_VALUE 0x690541c0 -#define IXP435_PROCESSOR_ID_VALUE 0x69054040 -#define IXP465_PROCESSOR_ID_VALUE 0x69054200 -#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0 - -#define cpu_is_ixp42x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP425_PROCESSOR_ID_VALUE) -#define cpu_is_ixp43x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP435_PROCESSOR_ID_VALUE) -#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP465_PROCESSOR_ID_VALUE) - -static inline u32 ixp4xx_read_feature_bits(void) -{ - unsigned int val = ~*IXP4XX_EXP_CFG2; - val &= ~IXP4XX_FEATURE_RESERVED; - if (!cpu_is_ixp46x()) - val &= ~IXP4XX_FEATURE_IXP46X_ONLY; - - return val; -} - -static inline void ixp4xx_write_feature_bits(u32 value) -{ - *IXP4XX_EXP_CFG2 = ~value; -} - -#endif /* _ASM_ARCH_CPU_H */ diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S deleted file mode 100644 index 37bc8ef23e6..00000000000 --- a/include/asm-arm/arch-ixp4xx/debug-macro.S +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc8000000 - movne \rx, #0xff000000 - orrne \rx, \rx, #0x00b00000 - add \rx,\rx,#3 @ Uart regs are at off set of 3 if - @ byte writes used - Big Endian. - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h deleted file mode 100644 index 0b755d6e919..00000000000 --- a/include/asm-arm/arch-ixp4xx/dma.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/dma.h - * - * Copyright (C) 2001-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include -#include -#include -#include - -#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h deleted file mode 100644 index 5afae8c2e29..00000000000 --- a/include/asm-arm/arch-ixp4xx/dsmg600.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * DSM-G600 platform specific definitions - * - * Copyright (C) 2006 Tower Technologies - * Author: Alessandro Zummo - * - * based on ixdp425.h: - * Copyright 2004 (C) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define DSMG600_SDA_PIN 5 -#define DSMG600_SCL_PIN 4 - -/* - * DSMG600 PCI IRQs - */ -#define DSMG600_PCI_MAX_DEV 4 -#define DSMG600_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define DSMG600_PCI_INTA_PIN 11 -#define DSMG600_PCI_INTB_PIN 10 -#define DSMG600_PCI_INTC_PIN 9 -#define DSMG600_PCI_INTD_PIN 8 -#define DSMG600_PCI_INTE_PIN 7 -#define DSMG600_PCI_INTF_PIN 6 - -/* DSM-G600 Timer Setting */ -#define DSMG600_FREQ 66000000 - -/* Buttons */ - -#define DSMG600_PB_GPIO 15 /* power button */ -#define DSMG600_RB_GPIO 3 /* reset button */ - -/* Power control */ - -#define DSMG600_PO_GPIO 2 /* power off */ - -/* LEDs */ - -#define DSMG600_LED_PWR_GPIO 0 -#define DSMG600_LED_WLAN_GPIO 14 diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S deleted file mode 100644 index ed313c52a8a..00000000000 --- a/include/asm-arm/arch-ixp4xx/entry-macro.S +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/entry-macro.S - * - * Low-level IRQ helper macros for IXP4xx-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) - ldr \irqstat, [\irqstat] @ get interrupts - cmp \irqstat, #0 - beq 1001f @ upper IRQ? - clz \irqnr, \irqstat - mov \base, #31 - sub \irqnr, \base, \irqnr - b 1002f @ lower IRQ being - @ handled - -1001: - /* - * IXP465/IXP435 has an upper IRQ status register - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) - ldr \irqstat, [\irqstat] @ get upper interrupts - mov \irqnr, #63 - clz \irqstat, \irqstat - cmp \irqstat, #32 - subne \irqnr, \irqnr, \irqstat -#endif -1002: - .endm - - diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h deleted file mode 100644 index 168b9848eb4..00000000000 --- a/include/asm-arm/arch-ixp4xx/fsg.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/fsg.h - * - * Freecom FSG-3 platform specific definitions - * - * Author: Rod Whitby - * Author: Tomasz Chmielewski - * Maintainers: http://www.nslu2-linux.org - * - * Based on coyote.h by - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define FSG_SDA_PIN 12 -#define FSG_SCL_PIN 13 - -/* - * FSG PCI IRQs - */ -#define FSG_PCI_MAX_DEV 3 -#define FSG_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define FSG_PCI_INTA_PIN 6 -#define FSG_PCI_INTB_PIN 7 -#define FSG_PCI_INTC_PIN 5 - -/* Buttons */ - -#define FSG_SB_GPIO 4 /* sync button */ -#define FSG_RB_GPIO 9 /* reset button */ -#define FSG_UB_GPIO 10 /* usb button */ - -/* LEDs */ - -#define FSG_LED_WLAN_BIT 0 -#define FSG_LED_WAN_BIT 1 -#define FSG_LED_SATA_BIT 2 -#define FSG_LED_USB_BIT 4 -#define FSG_LED_RING_BIT 5 -#define FSG_LED_SYNC_BIT 7 diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h deleted file mode 100644 index 28e7d27b1b8..00000000000 --- a/include/asm-arm/arch-ixp4xx/gpio.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/gpio.h - * - * IXP4XX GPIO wrappers for arch-neutral GPIO calls - * - * Written by Milan Svoboda - * Based on PXA implementation by Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_IXP4XX_GPIO_H -#define __ASM_ARCH_IXP4XX_GPIO_H - -#include - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - return; -} - -static inline int gpio_direction_input(unsigned gpio) -{ - gpio_line_config(gpio, IXP4XX_GPIO_IN); - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int level) -{ - gpio_line_set(gpio, level); - gpio_line_config(gpio, IXP4XX_GPIO_OUT); - return 0; -} - -static inline int gpio_get_value(unsigned gpio) -{ - int value; - - gpio_line_get(gpio, &value); - - return value; -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - gpio_line_set(gpio, value); -} - -#include /* cansleep wrappers */ - -extern int gpio_to_irq(int gpio); -extern int irq_to_gpio(int gpio); - -#endif - diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h deleted file mode 100644 index 2192dedc2f5..00000000000 --- a/include/asm-arm/arch-ixp4xx/gtwx5715.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/gtwx5715.h - * - * Gemtek GTWX5715 Gateway (Linksys WRV54G) - * - * Copyright 2004 (c) George T. Joseph - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif -#include "irqs.h" - -#define GTWX5715_GPIO0 0 -#define GTWX5715_GPIO1 1 -#define GTWX5715_GPIO2 2 -#define GTWX5715_GPIO3 3 -#define GTWX5715_GPIO4 4 -#define GTWX5715_GPIO5 5 -#define GTWX5715_GPIO6 6 -#define GTWX5715_GPIO7 7 -#define GTWX5715_GPIO8 8 -#define GTWX5715_GPIO9 9 -#define GTWX5715_GPIO10 10 -#define GTWX5715_GPIO11 11 -#define GTWX5715_GPIO12 12 -#define GTWX5715_GPIO13 13 -#define GTWX5715_GPIO14 14 - -#define GTWX5715_GPIO0_IRQ IRQ_IXP4XX_GPIO0 -#define GTWX5715_GPIO1_IRQ IRQ_IXP4XX_GPIO1 -#define GTWX5715_GPIO2_IRQ IRQ_IXP4XX_GPIO2 -#define GTWX5715_GPIO3_IRQ IRQ_IXP4XX_GPIO3 -#define GTWX5715_GPIO4_IRQ IRQ_IXP4XX_GPIO4 -#define GTWX5715_GPIO5_IRQ IRQ_IXP4XX_GPIO5 -#define GTWX5715_GPIO6_IRQ IRQ_IXP4XX_GPIO6 -#define GTWX5715_GPIO7_IRQ IRQ_IXP4XX_GPIO7 -#define GTWX5715_GPIO8_IRQ IRQ_IXP4XX_GPIO8 -#define GTWX5715_GPIO9_IRQ IRQ_IXP4XX_GPIO9 -#define GTWX5715_GPIO10_IRQ IRQ_IXP4XX_GPIO10 -#define GTWX5715_GPIO11_IRQ IRQ_IXP4XX_GPIO11 -#define GTWX5715_GPIO12_IRQ IRQ_IXP4XX_GPIO12 -#define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1 -#define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2 - -/* PCI controller GPIO to IRQ pin mappings - - INTA INTB -SLOT 0 10 11 -SLOT 1 11 10 - -*/ - -#define GTWX5715_PCI_SLOT0_DEVID 0 -#define GTWX5715_PCI_SLOT0_INTA_GPIO GTWX5715_GPIO10 -#define GTWX5715_PCI_SLOT0_INTB_GPIO GTWX5715_GPIO11 -#define GTWX5715_PCI_SLOT0_INTA_IRQ GTWX5715_GPIO10_IRQ -#define GTWX5715_PCI_SLOT0_INTB_IRQ GTWX5715_GPIO11_IRQ - -#define GTWX5715_PCI_SLOT1_DEVID 1 -#define GTWX5715_PCI_SLOT1_INTA_GPIO GTWX5715_GPIO11 -#define GTWX5715_PCI_SLOT1_INTB_GPIO GTWX5715_GPIO10 -#define GTWX5715_PCI_SLOT1_INTA_IRQ GTWX5715_GPIO11_IRQ -#define GTWX5715_PCI_SLOT1_INTB_IRQ GTWX5715_GPIO10_IRQ - -#define GTWX5715_PCI_SLOT_COUNT 2 -#define GTWX5715_PCI_INT_PIN_COUNT 2 - -/* - * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch - * and operate as an SPI type interface. The details of the interface - * are available on Kendin/Micrel's web site. - */ - -#define GTWX5715_KSSPI_SELECT GTWX5715_GPIO5 -#define GTWX5715_KSSPI_TXD GTWX5715_GPIO6 -#define GTWX5715_KSSPI_CLOCK GTWX5715_GPIO7 -#define GTWX5715_KSSPI_RXD GTWX5715_GPIO12 - -/* - * The "reset" button is wired to GPIO 3. - * The GPIO is brought "low" when the button is pushed. - */ - -#define GTWX5715_BUTTON_GPIO GTWX5715_GPIO3 -#define GTWX5715_BUTTON_IRQ GTWX5715_GPIO3_IRQ - -/* - * Board Label Front Label - * LED1 Power - * LED2 Wireless-G - * LED3 not populated but could be - * LED4 Internet - * LED5 - LED8 Controlled by KS8995M Switch - * LED9 DMZ - */ - -#define GTWX5715_LED1_GPIO GTWX5715_GPIO2 -#define GTWX5715_LED2_GPIO GTWX5715_GPIO9 -#define GTWX5715_LED3_GPIO GTWX5715_GPIO8 -#define GTWX5715_LED4_GPIO GTWX5715_GPIO1 -#define GTWX5715_LED9_GPIO GTWX5715_GPIO4 diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h deleted file mode 100644 index fa723a62785..00000000000 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/hardware.h - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* - * Hardware definitions for IXP4xx based systems - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x40000000 : 0x48000000) - -/* - * We override the standard dma-mask routines for bouncing. - */ -#define HAVE_ARCH_PCI_SET_DMA_MASK - -#define pcibios_assign_all_busses() 1 - -/* Register locations and bits */ -#include "ixp4xx-regs.h" - -#ifndef __ASSEMBLER__ -#include -#endif - -/* Platform helper functions and definitions */ -#include "platform.h" - -/* Platform specific details */ -#include "ixdp425.h" -#include "avila.h" -#include "coyote.h" -#include "prpmc1100.h" -#include "nslu2.h" -#include "nas100d.h" -#include "dsmg600.h" -#include "fsg.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h deleted file mode 100644 index 8e7426081f0..00000000000 --- a/include/asm-arm/arch-ixp4xx/io.h +++ /dev/null @@ -1,569 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/io.h - * - * Author: Deepak Saxena - * - * Copyright (C) 2002-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#include - -#define IO_SPACE_LIMIT 0xffff0000 - -extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); -extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); - - -/* - * IXP4xx provides two methods of accessing PCI memory space: - * - * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB). - * To access PCI via this space, we simply ioremap() the BAR - * into the kernel and we can use the standard read[bwl]/write[bwl] - * macros. This is the preffered method due to speed but it - * limits the system to just 64MB of PCI memory. This can be - * problamatic if using video cards and other memory-heavy - * targets. - * - * 2) If > 64MB of memory space is required, the IXP4xx can be configured - * to use indirect registers to access PCI (as we do below for I/O - * transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff) - * of memory on the bus. The disadvantage of this is that every - * PCI access requires three local register accesses plus a spinlock, - * but in some cases the performance hit is acceptable. In addition, - * you cannot mmap() PCI devices in this case. - * - */ -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - -#define __mem_pci(a) (a) - -#else - -#include - -/* - * In the case of using indirect PCI, we simply return the actual PCI - * address and our read/write implementation use that to drive the - * access registers. If something outside of PCI is ioremap'd, we - * fallback to the default. - */ -static inline void __iomem * -__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype) -{ - if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff)) - return __arm_ioremap(addr, size, mtype); - - return (void __iomem *)addr; -} - -static inline void -__ixp4xx_iounmap(void __iomem *addr) -{ - if ((__force u32)addr >= VMALLOC_START) - __iounmap(addr); -} - -#define __arch_ioremap(a, s, f) __ixp4xx_ioremap(a, s, f) -#define __arch_iounmap(a) __ixp4xx_iounmap(a) - -#define writeb(v, p) __ixp4xx_writeb(v, p) -#define writew(v, p) __ixp4xx_writew(v, p) -#define writel(v, p) __ixp4xx_writel(v, p) - -#define writesb(p, v, l) __ixp4xx_writesb(p, v, l) -#define writesw(p, v, l) __ixp4xx_writesw(p, v, l) -#define writesl(p, v, l) __ixp4xx_writesl(p, v, l) - -#define readb(p) __ixp4xx_readb(p) -#define readw(p) __ixp4xx_readw(p) -#define readl(p) __ixp4xx_readl(p) - -#define readsb(p, v, l) __ixp4xx_readsb(p, v, l) -#define readsw(p, v, l) __ixp4xx_readsw(p, v, l) -#define readsl(p, v, l) __ixp4xx_readsl(p, v, l) - -static inline void -__ixp4xx_writeb(u8 value, volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) { - __raw_writeb(value, addr); - return; - } - - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); -} - -static inline void -__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count) -{ - while (count--) - writeb(*vaddr++, bus_addr); -} - -static inline void -__ixp4xx_writew(u16 value, volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) { - __raw_writew(value, addr); - return; - } - - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); -} - -static inline void -__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) -{ - while (count--) - writew(*vaddr++, bus_addr); -} - -static inline void -__ixp4xx_writel(u32 value, volatile void __iomem *p) -{ - u32 addr = (__force u32)p; - if (addr >= VMALLOC_START) { - __raw_writel(value, p); - return; - } - - ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value); -} - -static inline void -__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count) -{ - while (count--) - writel(*vaddr++, bus_addr); -} - -static inline unsigned char -__ixp4xx_readb(const volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) - return __raw_readb(addr); - - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) - return 0xff; - - return data >> (8*n); -} - -static inline void -__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = readb(bus_addr); -} - -static inline unsigned short -__ixp4xx_readw(const volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) - return __raw_readw(addr); - - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) - return 0xffff; - - return data>>(8*n); -} - -static inline void -__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = readw(bus_addr); -} - -static inline unsigned long -__ixp4xx_readl(const volatile void __iomem *p) -{ - u32 addr = (__force u32)p; - u32 data; - - if (addr >= VMALLOC_START) - return __raw_readl(p); - - if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) - return 0xffffffff; - - return data; -} - -static inline void -__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = readl(bus_addr); -} - - -/* - * We can use the built-in functions b/c they end up calling writeb/readb - */ -#define memset_io(c,v,l) _memset_io((c),(v),(l)) -#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l)) -#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l)) - -#endif - -#ifndef CONFIG_PCI - -#define __io(v) v - -#else - -/* - * IXP4xx does not have a transparent cpu -> PCI I/O translation - * window. Instead, it has a set of registers that must be tweaked - * with the proper byte lanes, command types, and address for the - * transaction. This means that we need to override the default - * I/O functions. - */ -#define outb(p, v) __ixp4xx_outb(p, v) -#define outw(p, v) __ixp4xx_outw(p, v) -#define outl(p, v) __ixp4xx_outl(p, v) - -#define outsb(p, v, l) __ixp4xx_outsb(p, v, l) -#define outsw(p, v, l) __ixp4xx_outsw(p, v, l) -#define outsl(p, v, l) __ixp4xx_outsl(p, v, l) - -#define inb(p) __ixp4xx_inb(p) -#define inw(p) __ixp4xx_inw(p) -#define inl(p) __ixp4xx_inl(p) - -#define insb(p, v, l) __ixp4xx_insb(p, v, l) -#define insw(p, v, l) __ixp4xx_insw(p, v, l) -#define insl(p, v, l) __ixp4xx_insl(p, v, l) - - -static inline void -__ixp4xx_outb(u8 value, u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); -} - -static inline void -__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count) -{ - while (count--) - outb(*vaddr++, io_addr); -} - -static inline void -__ixp4xx_outw(u16 value, u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); -} - -static inline void -__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count) -{ - while (count--) - outw(cpu_to_le16(*vaddr++), io_addr); -} - -static inline void -__ixp4xx_outl(u32 value, u32 addr) -{ - ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value); -} - -static inline void -__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count) -{ - while (count--) - outl(*vaddr++, io_addr); -} - -static inline u8 -__ixp4xx_inb(u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) - return 0xff; - - return data >> (8*n); -} - -static inline void -__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = inb(io_addr); -} - -static inline u16 -__ixp4xx_inw(u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) - return 0xffff; - - return data>>(8*n); -} - -static inline void -__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = le16_to_cpu(inw(io_addr)); -} - -static inline u32 -__ixp4xx_inl(u32 addr) -{ - u32 data; - if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data)) - return 0xffffffff; - - return data; -} - -static inline void -__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = inl(io_addr); -} - -#define PIO_OFFSET 0x10000UL -#define PIO_MASK 0x0ffffUL - -#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ - ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) -static inline unsigned int -__ixp4xx_ioread8(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inb(port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return (unsigned int)__raw_readb(port); -#else - return (unsigned int)__ixp4xx_readb(addr); -#endif -} - -static inline void -__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_insb(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsb(addr, vaddr, count); -#else - __ixp4xx_readsb(addr, vaddr, count); -#endif -} - -static inline unsigned int -__ixp4xx_ioread16(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inw(port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le16_to_cpu(__raw_readw((u32)port)); -#else - return (unsigned int)__ixp4xx_readw(addr); -#endif -} - -static inline void -__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_insw(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsw(addr, vaddr, count); -#else - __ixp4xx_readsw(addr, vaddr, count); -#endif -} - -static inline unsigned int -__ixp4xx_ioread32(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inl(port & PIO_MASK); - else { -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le32_to_cpu((__force __le32)__raw_readl(addr)); -#else - return (unsigned int)__ixp4xx_readl(addr); -#endif - } -} - -static inline void -__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_insl(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsl(addr, vaddr, count); -#else - __ixp4xx_readsl(addr, vaddr, count); -#endif -} - -static inline void -__ixp4xx_iowrite8(u8 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outb(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writeb(value, port); -#else - __ixp4xx_writeb(value, addr); -#endif -} - -static inline void -__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outsb(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesb(addr, vaddr, count); -#else - __ixp4xx_writesb(addr, vaddr, count); -#endif -} - -static inline void -__ixp4xx_iowrite16(u16 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outw(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writew(cpu_to_le16(value), addr); -#else - __ixp4xx_writew(value, addr); -#endif -} - -static inline void -__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outsw(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesw(addr, vaddr, count); -#else - __ixp4xx_writesw(addr, vaddr, count); -#endif -} - -static inline void -__ixp4xx_iowrite32(u32 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outl(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writel((u32 __force)cpu_to_le32(value), addr); -#else - __ixp4xx_writel(value, addr); -#endif -} - -static inline void -__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outsl(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesl(addr, vaddr, count); -#else - __ixp4xx_writesl(addr, vaddr, count); -#endif -} - -#define ioread8(p) __ixp4xx_ioread8(p) -#define ioread16(p) __ixp4xx_ioread16(p) -#define ioread32(p) __ixp4xx_ioread32(p) - -#define ioread8_rep(p, v, c) __ixp4xx_ioread8_rep(p, v, c) -#define ioread16_rep(p, v, c) __ixp4xx_ioread16_rep(p, v, c) -#define ioread32_rep(p, v, c) __ixp4xx_ioread32_rep(p, v, c) - -#define iowrite8(v,p) __ixp4xx_iowrite8(v,p) -#define iowrite16(v,p) __ixp4xx_iowrite16(v,p) -#define iowrite32(v,p) __ixp4xx_iowrite32(v,p) - -#define iowrite8_rep(p, v, c) __ixp4xx_iowrite8_rep(p, v, c) -#define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c) -#define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c) - -#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) -#define ioport_unmap(addr) -#endif // !CONFIG_PCI - -#endif // __ASM_ARM_ARCH_IO_H - diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h deleted file mode 100644 index 674af4a8414..00000000000 --- a/include/asm-arm/arch-ixp4xx/irqs.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/irqs.h - * - * IRQ definitions for IXP4XX based systems - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ARCH_IXP4XX_IRQS_H_ -#define _ARCH_IXP4XX_IRQS_H_ - - -#define IRQ_IXP4XX_NPEA 0 -#define IRQ_IXP4XX_NPEB 1 -#define IRQ_IXP4XX_NPEC 2 -#define IRQ_IXP4XX_QM1 3 -#define IRQ_IXP4XX_QM2 4 -#define IRQ_IXP4XX_TIMER1 5 -#define IRQ_IXP4XX_GPIO0 6 -#define IRQ_IXP4XX_GPIO1 7 -#define IRQ_IXP4XX_PCI_INT 8 -#define IRQ_IXP4XX_PCI_DMA1 9 -#define IRQ_IXP4XX_PCI_DMA2 10 -#define IRQ_IXP4XX_TIMER2 11 -#define IRQ_IXP4XX_USB 12 -#define IRQ_IXP4XX_UART2 13 -#define IRQ_IXP4XX_TIMESTAMP 14 -#define IRQ_IXP4XX_UART1 15 -#define IRQ_IXP4XX_WDOG 16 -#define IRQ_IXP4XX_AHB_PMU 17 -#define IRQ_IXP4XX_XSCALE_PMU 18 -#define IRQ_IXP4XX_GPIO2 19 -#define IRQ_IXP4XX_GPIO3 20 -#define IRQ_IXP4XX_GPIO4 21 -#define IRQ_IXP4XX_GPIO5 22 -#define IRQ_IXP4XX_GPIO6 23 -#define IRQ_IXP4XX_GPIO7 24 -#define IRQ_IXP4XX_GPIO8 25 -#define IRQ_IXP4XX_GPIO9 26 -#define IRQ_IXP4XX_GPIO10 27 -#define IRQ_IXP4XX_GPIO11 28 -#define IRQ_IXP4XX_GPIO12 29 -#define IRQ_IXP4XX_SW_INT1 30 -#define IRQ_IXP4XX_SW_INT2 31 -#define IRQ_IXP4XX_USB_HOST 32 -#define IRQ_IXP4XX_I2C 33 -#define IRQ_IXP4XX_SSP 34 -#define IRQ_IXP4XX_TSYNC 35 -#define IRQ_IXP4XX_EAU_DONE 36 -#define IRQ_IXP4XX_SHA_DONE 37 -#define IRQ_IXP4XX_SWCP_PE 58 -#define IRQ_IXP4XX_QM_PE 60 -#define IRQ_IXP4XX_MCU_ECC 61 -#define IRQ_IXP4XX_EXP_PE 62 - -/* - * Only first 32 sources are valid if running on IXP42x systems - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) -#define NR_IRQS 64 -#else -#define NR_IRQS 32 -#endif - -#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) - -/* - * IXDP425 board IRQs - */ -#define IRQ_IXDP425_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_IXDP425_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8 - -/* - * Gateworks Avila board IRQs - */ -#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8 - - -/* - * PrPMC1100 Board IRQs - */ -#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_PRPMC1100_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8 - -/* - * ADI Coyote Board IRQs - */ -#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6 -#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 -#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -/* - * NSLU2 board IRQs - */ -#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 - -/* - * NAS100D board IRQs - */ -#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 -#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 - -/* - * D-Link DSM-G600 RevA board IRQs - */ -#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8 -#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 -#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 - -/* - * Freecom FSG-3 Board IRQs - */ -#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6 -#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7 -#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 - -#endif diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h deleted file mode 100644 index d0a1dcb48d5..00000000000 --- a/include/asm-arm/arch-ixp4xx/ixdp425.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/ixdp425.h - * - * IXDP425 platform specific definitions - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define IXDP425_SDA_PIN 7 -#define IXDP425_SCL_PIN 6 - -/* - * IXDP425 PCI IRQs - */ -#define IXDP425_PCI_MAX_DEV 4 -#define IXDP425_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define IXDP425_PCI_INTA_PIN 11 -#define IXDP425_PCI_INTB_PIN 10 -#define IXDP425_PCI_INTC_PIN 9 -#define IXDP425_PCI_INTD_PIN 8 - -/* NAND Flash pins */ -#define IXDP425_NAND_NCE_PIN 12 - -#define IXDP425_NAND_CMD_BYTE 0x01 -#define IXDP425_NAND_ADDR_BYTE 0x02 diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h deleted file mode 100644 index 68aca8554f5..00000000000 --- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +++ /dev/null @@ -1,638 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h - * - * Register definitions for IXP4xx chipset. This file contains - * register location and bit definitions only. Platform specific - * definitions and helper function declarations are in platform.h - * and machine-name.h. - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ASM_ARM_IXP4XX_H_ -#define _ASM_ARM_IXP4XX_H_ - -/* - * IXP4xx Linux Memory Map: - * - * Phy Size Virt Description - * ========================================================================= - * - * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM - * - * 0x48000000 0x04000000 ioremap'd PCI Memory Space - * - * 0x50000000 0x10000000 ioremap'd EXP BUS - * - * 0x6000000 0x00004000 ioremap'd QMgr - * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG - * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG - * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals - */ - -/* - * Queue Manager - */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) - -/* - * Expansion BUS Configuration registers - */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) - -/* - * PCI Config registers - */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) - -/* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. - */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) - -#define IXP4XX_EXP_CS0_OFFSET 0x00 -#define IXP4XX_EXP_CS1_OFFSET 0x04 -#define IXP4XX_EXP_CS2_OFFSET 0x08 -#define IXP4XX_EXP_CS3_OFFSET 0x0C -#define IXP4XX_EXP_CS4_OFFSET 0x10 -#define IXP4XX_EXP_CS5_OFFSET 0x14 -#define IXP4XX_EXP_CS6_OFFSET 0x18 -#define IXP4XX_EXP_CS7_OFFSET 0x1C -#define IXP4XX_EXP_CFG0_OFFSET 0x20 -#define IXP4XX_EXP_CFG1_OFFSET 0x24 -#define IXP4XX_EXP_CFG2_OFFSET 0x28 -#define IXP4XX_EXP_CFG3_OFFSET 0x2C - -/* - * Expansion Bus Controller registers. - */ -#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x))) - -#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET) -#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET) -#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) -#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET) -#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET) -#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET) -#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET) -#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET) - -#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) -#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) -#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) -#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET) - - -/* - * Peripheral Space Register Region Base Addresses - */ -#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000) -#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000) -#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000) -#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000) -#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000) -#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000) -#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000) -#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000) -#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000) -#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000) -#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000) -#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000) -/* ixp46X only */ -#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000) -#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000) -#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000) -#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000) -#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000) -#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000) -#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000) - - -#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000) -#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000) -#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000) -#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) -#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) -#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) -#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000) -#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000) -#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000) -#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) -#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) -#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) -/* ixp46X only */ -#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000) -#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000) -#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000) -#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000) -#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000) -#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000) -#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) - -/* - * Constants to make it easy to access Interrupt Controller registers - */ -#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */ -#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */ -#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ -#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */ -#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */ -#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */ -#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ -#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ - -/* - * IXP465-only - */ -#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */ -#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */ -#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */ -#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */ -#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */ -#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */ - - -/* - * Interrupt Controller Register Definitions. - */ - -#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x))) - -#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET) -#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET) -#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET) -#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET) -#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET) -#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET) -#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) -#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET) -#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET) -#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET) -#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET) -#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET) -#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET) -#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET) - -/* - * Constants to make it easy to access GPIO registers - */ -#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00 -#define IXP4XX_GPIO_GPOER_OFFSET 0x04 -#define IXP4XX_GPIO_GPINR_OFFSET 0x08 -#define IXP4XX_GPIO_GPISR_OFFSET 0x0C -#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10 -#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14 -#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18 -#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C - -/* - * GPIO Register Definitions. - * [Only perform 32bit reads/writes] - */ -#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x))) - -#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET) -#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET) -#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET) -#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET) -#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET) -#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET) -#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET) -#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET) - -/* - * GPIO register bit definitions - */ - -/* Interrupt styles - */ -#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 - -/* - * Mask used to clear interrupt styles - */ -#define IXP4XX_GPIO_STYLE_CLEAR 0x7 -#define IXP4XX_GPIO_STYLE_SIZE 3 - -/* - * Constants to make it easy to access Timer Control/Status registers - */ -#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */ -#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ -#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ -#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ -#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ -#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */ -#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */ -#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */ -#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */ - -/* - * Operating System Timer Register Definitions. - */ - -#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x))) - -#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET) -#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET) -#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET) -#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET) -#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET) -#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET) -#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET) -#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET) -#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET) - -/* - * Timer register values and bit definitions - */ -#define IXP4XX_OST_ENABLE 0x00000001 -#define IXP4XX_OST_ONE_SHOT 0x00000002 -/* Low order bits of reload value ignored */ -#define IXP4XX_OST_RELOAD_MASK 0x00000003 -#define IXP4XX_OST_DISABLED 0x00000000 -#define IXP4XX_OSST_TIMER_1_PEND 0x00000001 -#define IXP4XX_OSST_TIMER_2_PEND 0x00000002 -#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004 -#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008 -#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010 - -#define IXP4XX_WDT_KEY 0x0000482E - -#define IXP4XX_WDT_RESET_ENABLE 0x00000001 -#define IXP4XX_WDT_IRQ_ENABLE 0x00000002 -#define IXP4XX_WDT_COUNT_ENABLE 0x00000004 - - -/* - * Constants to make it easy to access PCI Control/Status registers - */ -#define PCI_NP_AD_OFFSET 0x00 -#define PCI_NP_CBE_OFFSET 0x04 -#define PCI_NP_WDATA_OFFSET 0x08 -#define PCI_NP_RDATA_OFFSET 0x0c -#define PCI_CRP_AD_CBE_OFFSET 0x10 -#define PCI_CRP_WDATA_OFFSET 0x14 -#define PCI_CRP_RDATA_OFFSET 0x18 -#define PCI_CSR_OFFSET 0x1c -#define PCI_ISR_OFFSET 0x20 -#define PCI_INTEN_OFFSET 0x24 -#define PCI_DMACTRL_OFFSET 0x28 -#define PCI_AHBMEMBASE_OFFSET 0x2c -#define PCI_AHBIOBASE_OFFSET 0x30 -#define PCI_PCIMEMBASE_OFFSET 0x34 -#define PCI_AHBDOORBELL_OFFSET 0x38 -#define PCI_PCIDOORBELL_OFFSET 0x3C -#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40 -#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44 -#define PCI_ATPDMA0_LENADDR_OFFSET 0x48 -#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C -#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 -#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 - -/* - * PCI Control/Status Registers - */ -#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x))) - -#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET) -#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET) -#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET) -#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET) -#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET) -#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET) -#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET) -#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET) -#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET) -#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET) -#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET) -#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET) -#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET) -#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET) -#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET) -#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET) -#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET) -#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET) -#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET) -#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) -#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) -#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) - -/* - * PCI register values and bit definitions - */ - -/* CSR bit definitions */ -#define PCI_CSR_HOST 0x00000001 -#define PCI_CSR_ARBEN 0x00000002 -#define PCI_CSR_ADS 0x00000004 -#define PCI_CSR_PDS 0x00000008 -#define PCI_CSR_ABE 0x00000010 -#define PCI_CSR_DBT 0x00000020 -#define PCI_CSR_ASE 0x00000100 -#define PCI_CSR_IC 0x00008000 - -/* ISR (Interrupt status) Register bit definitions */ -#define PCI_ISR_PSE 0x00000001 -#define PCI_ISR_PFE 0x00000002 -#define PCI_ISR_PPE 0x00000004 -#define PCI_ISR_AHBE 0x00000008 -#define PCI_ISR_APDC 0x00000010 -#define PCI_ISR_PADC 0x00000020 -#define PCI_ISR_ADB 0x00000040 -#define PCI_ISR_PDB 0x00000080 - -/* INTEN (Interrupt Enable) Register bit definitions */ -#define PCI_INTEN_PSE 0x00000001 -#define PCI_INTEN_PFE 0x00000002 -#define PCI_INTEN_PPE 0x00000004 -#define PCI_INTEN_AHBE 0x00000008 -#define PCI_INTEN_APDC 0x00000010 -#define PCI_INTEN_PADC 0x00000020 -#define PCI_INTEN_ADB 0x00000040 -#define PCI_INTEN_PDB 0x00000080 - -/* - * Shift value for byte enable on NP cmd/byte enable register - */ -#define IXP4XX_PCI_NP_CBE_BESL 4 - -/* - * PCI commands supported by NP access unit - */ -#define NP_CMD_IOREAD 0x2 -#define NP_CMD_IOWRITE 0x3 -#define NP_CMD_CONFIGREAD 0xa -#define NP_CMD_CONFIGWRITE 0xb -#define NP_CMD_MEMREAD 0x6 -#define NP_CMD_MEMWRITE 0x7 - -/* - * Constants for CRP access into local config space - */ -#define CRP_AD_CBE_BESL 20 -#define CRP_AD_CBE_WRITE 0x00010000 - - -/* - * USB Device Controller - * - * These are used by the USB gadget driver, so they don't follow the - * IXP4XX_ naming convetions. - * - */ -# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x))) - -/* UDC Undocumented - Reserved1 */ -#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004) -/* UDC Undocumented - Reserved2 */ -#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008) -/* UDC Undocumented - Reserved3 */ -#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C) -/* UDC Control Register */ -#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) -/* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010) -/* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014) -/* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018) -/* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C) -/* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020) -/* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024) -/* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028) -/* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C) -/* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030) -/* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034) -/* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038) -/* UDC Endpoint 11 (IN) Control/Status Register */ -#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C) -/* UDC Endpoint 12 (OUT) Control/Status Register */ -#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040) -/* UDC Endpoint 13 (IN) Control/Status Register */ -#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044) -/* UDC Endpoint 14 (OUT) Control/Status Register */ -#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048) -/* UDC Endpoint 15 (Interrupt) Control/Status Register */ -#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C) -/* UDC Frame Number Register High */ -#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060) -/* UDC Frame Number Register Low */ -#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064) -/* UDC Byte Count Reg 2 */ -#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068) -/* UDC Byte Count Reg 4 */ -#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c) -/* UDC Byte Count Reg 7 */ -#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070) -/* UDC Byte Count Reg 9 */ -#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074) -/* UDC Byte Count Reg 12 */ -#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078) -/* UDC Byte Count Reg 14 */ -#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c) -/* UDC Endpoint 0 Data Register */ -#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080) -/* UDC Endpoint 1 Data Register */ -#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100) -/* UDC Endpoint 2 Data Register */ -#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180) -/* UDC Endpoint 3 Data Register */ -#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200) -/* UDC Endpoint 4 Data Register */ -#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400) -/* UDC Endpoint 5 Data Register */ -#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0) -/* UDC Endpoint 6 Data Register */ -#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600) -/* UDC Endpoint 7 Data Register */ -#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680) -/* UDC Endpoint 8 Data Register */ -#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700) -/* UDC Endpoint 9 Data Register */ -#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900) -/* UDC Endpoint 10 Data Register */ -#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0) -/* UDC Endpoint 11 Data Register */ -#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00) -/* UDC Endpoint 12 Data Register */ -#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80) -/* UDC Endpoint 13 Data Register */ -#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00) -/* UDC Endpoint 14 Data Register */ -#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00) -/* UDC Endpoint 15 Data Register */ -#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0) -/* UDC Interrupt Control Register 0 */ -#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050) -/* UDC Interrupt Control Register 1 */ -#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054) -/* UDC Status Interrupt Register 0 */ -#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058) -/* UDC Status Interrupt Register 1 */ -#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C) - -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* "fuse" bits of IXP_EXP_CFG2 */ -#define IXP4XX_FEATURE_RCOMP (1 << 0) -#define IXP4XX_FEATURE_USB_DEVICE (1 << 1) -#define IXP4XX_FEATURE_HASH (1 << 2) -#define IXP4XX_FEATURE_AES (1 << 3) -#define IXP4XX_FEATURE_DES (1 << 4) -#define IXP4XX_FEATURE_HDLC (1 << 5) -#define IXP4XX_FEATURE_AAL (1 << 6) -#define IXP4XX_FEATURE_HSS (1 << 7) -#define IXP4XX_FEATURE_UTOPIA (1 << 8) -#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9) -#define IXP4XX_FEATURE_NPEC_ETH (1 << 10) -#define IXP4XX_FEATURE_RESET_NPEA (1 << 11) -#define IXP4XX_FEATURE_RESET_NPEB (1 << 12) -#define IXP4XX_FEATURE_RESET_NPEC (1 << 13) -#define IXP4XX_FEATURE_PCI (1 << 14) -#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) -#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16) -#define IXP4XX_FEATURE_USB_HOST (1 << 18) -#define IXP4XX_FEATURE_NPEA_ETH (1 << 19) -#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20) -#define IXP4XX_FEATURE_RSA (1 << 21) -#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) -#define IXP4XX_FEATURE_RESERVED (0xFF << 24) - -#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \ - IXP4XX_FEATURE_USB_HOST | \ - IXP4XX_FEATURE_NPEA_ETH | \ - IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ - IXP4XX_FEATURE_RSA | \ - IXP4XX_FEATURE_XSCALE_MAX_FREQ) - -#endif diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h deleted file mode 100644 index af9667b57ab..00000000000 --- a/include/asm-arm/arch-ixp4xx/memory.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/memory.h - * - * Copyright (c) 2001-2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI) - -void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes); - -#define arch_adjust_zones(node, size, holes) \ - ixp4xx_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (SZ_64M - 1) - -#endif - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * These are dummies for now. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h deleted file mode 100644 index ecb12d66399..00000000000 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nas100d.h - * - * NAS100D platform specific definitions - * - * Copyright (c) 2005 Tower Technologies - * - * Author: Alessandro Zummo - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define NAS100D_SDA_PIN 5 -#define NAS100D_SCL_PIN 6 - -/* - * NAS100D PCI IRQs - */ -#define NAS100D_PCI_MAX_DEV 3 -#define NAS100D_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NAS100D_PCI_INTA_PIN 11 -#define NAS100D_PCI_INTB_PIN 10 -#define NAS100D_PCI_INTC_PIN 9 -#define NAS100D_PCI_INTD_PIN 8 -#define NAS100D_PCI_INTE_PIN 7 - -/* Buttons */ - -#define NAS100D_PB_GPIO 14 /* power button */ -#define NAS100D_RB_GPIO 4 /* reset button */ - -/* Power control */ - -#define NAS100D_PO_GPIO 12 /* power off */ - -/* LEDs */ - -#define NAS100D_LED_WLAN_GPIO 0 -#define NAS100D_LED_DISK_GPIO 3 -#define NAS100D_LED_PWR_GPIO 15 diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/arch-ixp4xx/npe.h deleted file mode 100644 index 37d0511689d..00000000000 --- a/include/asm-arm/arch-ixp4xx/npe.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef __IXP4XX_NPE_H -#define __IXP4XX_NPE_H - -#include - -extern const char *npe_names[]; - -struct npe_regs { - u32 exec_addr, exec_data, exec_status_cmd, exec_count; - u32 action_points[4]; - u32 watchpoint_fifo, watch_count; - u32 profile_count; - u32 messaging_status, messaging_control; - u32 mailbox_status, /*messaging_*/ in_out_fifo; -}; - -struct npe { - struct resource *mem_res; - struct npe_regs __iomem *regs; - u32 regs_phys; - int id; - int valid; -}; - - -static inline const char *npe_name(struct npe *npe) -{ - return npe_names[npe->id]; -} - -int npe_running(struct npe *npe); -int npe_send_message(struct npe *npe, const void *msg, const char *what); -int npe_recv_message(struct npe *npe, void *msg, const char *what); -int npe_send_recv_message(struct npe *npe, void *msg, const char *what); -int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); -struct npe *npe_request(int id); -void npe_release(struct npe *npe); - -#endif /* __IXP4XX_NPE_H */ diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h deleted file mode 100644 index fa895f44e43..00000000000 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nslu2.h - * - * NSLU2 platform specific definitions - * - * Author: Mark Rakes - * Maintainers: http://www.nslu2-linux.org - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define NSLU2_SDA_PIN 7 -#define NSLU2_SCL_PIN 6 - -/* - * NSLU2 PCI IRQs - */ -#define NSLU2_PCI_MAX_DEV 3 -#define NSLU2_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NSLU2_PCI_INTA_PIN 11 -#define NSLU2_PCI_INTB_PIN 10 -#define NSLU2_PCI_INTC_PIN 9 -#define NSLU2_PCI_INTD_PIN 8 - -/* NSLU2 Timer */ -#define NSLU2_FREQ 66000000 - -/* Buttons */ - -#define NSLU2_PB_GPIO 5 /* power button */ -#define NSLU2_PO_GPIO 8 /* power off */ -#define NSLU2_RB_GPIO 12 /* reset button */ - -/* Buzzer */ - -#define NSLU2_GPIO_BUZZ 4 - -/* LEDs */ - -#define NSLU2_LED_RED_GPIO 0 -#define NSLU2_LED_GRN_GPIO 1 -#define NSLU2_LED_DISK1_GPIO 3 -#define NSLU2_LED_DISK2_GPIO 2 diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h deleted file mode 100644 index b2af5154cef..00000000000 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/platform.h - * - * Constants and functions that are useful to IXP4xx platform-specific code - * and device drivers. - * - * Copyright (C) 2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#ifndef __ASSEMBLY__ - -#include - -#ifndef __ARMEB__ -#define REG_OFFSET 0 -#else -#define REG_OFFSET 3 -#endif - -/* - * Expansion bus memory regions - */ -#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) - -/* - * The expansion bus on the IXP4xx can be configured for either 16 or - * 32MB windows and the CS offset for each region changes based on the - * current configuration. This means that we cannot simply hardcode - * each offset. ixp4xx_sys_init() looks at the expansion bus configuration - * as setup by the bootloader to determine our window size. - */ -extern unsigned long ixp4xx_exp_bus_size; - -#define IXP4XX_EXP_BUS_BASE(region)\ - (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) - -#define IXP4XX_EXP_BUS_END(region)\ - (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1) - -/* Those macros can be used to adjust timing and configure - * other features for each region. - */ - -#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16) -#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20) -#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22) -#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26) -#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28) -#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10) -#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14) - -#define IXP4XX_EXP_BUS_CS_EN (1L << 31) -#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6) -#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5) -#define IXP4XX_EXP_BUS_MUX_EN (1L << 4) -#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3) -#define IXP4XX_EXP_BUS_WR_EN (1L << 1) -#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0) - -#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00 -#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01 -#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02 - -#define IXP4XX_FLASH_WRITABLE (0x2) -#define IXP4XX_FLASH_DEFAULT (0xbcd23c40) -#define IXP4XX_FLASH_WRITE (0xbcd23c42) - -/* - * Clock Speed Definitions. - */ -#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ -#define IXP4XX_UART_XTAL 14745600 - -/* - * This structure provide a means for the board setup code - * to give information to th pata_ixp4xx driver. It is - * passed as platform_data. - */ -struct ixp4xx_pata_data { - volatile u32 *cs0_cfg; - volatile u32 *cs1_cfg; - unsigned long cs0_bits; - unsigned long cs1_bits; - void __iomem *cs0; - void __iomem *cs1; -}; - -struct sys_timer; - -#define IXP4XX_ETH_NPEA 0x00 -#define IXP4XX_ETH_NPEB 0x10 -#define IXP4XX_ETH_NPEC 0x20 - -/* Information about built-in Ethernet MAC interfaces */ -struct eth_plat_info { - u8 phy; /* MII PHY ID, 0 - 31 */ - u8 rxq; /* configurable, currently 0 - 31 only */ - u8 txreadyq; - u8 hwaddr[6]; -}; - -/* Information about built-in HSS (synchronous serial) interfaces */ -struct hss_plat_info { - int (*set_clock)(int port, unsigned int clock_type); - int (*open)(int port, void *pdev, - void (*set_carrier_cb)(void *pdev, int carrier)); - void (*close)(int port, void *pdev); - u8 txreadyq; -}; - -/* - * Frequency of clock used for primary clocksource - */ -extern unsigned long ixp4xx_timer_freq; - -/* - * Functions used by platform-level setup code - */ -extern void ixp4xx_map_io(void); -extern void ixp4xx_init_irq(void); -extern void ixp4xx_sys_init(void); -extern void ixp4xx_timer_init(void); -extern struct sys_timer ixp4xx_timer; -extern void ixp4xx_pci_preinit(void); -struct pci_sys_data; -extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); - -/* - * GPIO-functions - */ -/* - * The following converted to the real HW bits the gpio_line_config - */ -/* GPIO pin types */ -#define IXP4XX_GPIO_OUT 0x1 -#define IXP4XX_GPIO_IN 0x2 - -/* GPIO signal types */ -#define IXP4XX_GPIO_LOW 0 -#define IXP4XX_GPIO_HIGH 1 - -/* GPIO Clocks */ -#define IXP4XX_GPIO_CLK_0 14 -#define IXP4XX_GPIO_CLK_1 15 - -static inline void gpio_line_config(u8 line, u32 direction) -{ - if (direction == IXP4XX_GPIO_IN) - *IXP4XX_GPIO_GPOER |= (1 << line); - else - *IXP4XX_GPIO_GPOER &= ~(1 << line); -} - -static inline void gpio_line_get(u8 line, int *value) -{ - *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; -} - -static inline void gpio_line_set(u8 line, int value) -{ - if (value == IXP4XX_GPIO_HIGH) - *IXP4XX_GPIO_GPOUTR |= (1 << line); - else if (value == IXP4XX_GPIO_LOW) - *IXP4XX_GPIO_GPOUTR &= ~(1 << line); -} - -#endif // __ASSEMBLY__ - diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h deleted file mode 100644 index 100855feafd..00000000000 --- a/include/asm-arm/arch-ixp4xx/prpmc1100.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/prpmc1100.h - * - * Motorolla PrPMC1100 platform specific definitions - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define PRPMC1100_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define PRPMC1100_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - -#define PRPMC1100_PCI_MIN_DEVID 10 -#define PRPMC1100_PCI_MAX_DEVID 16 -#define PRPMC1100_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define PRPMC1100_PCI_INTA_PIN 11 -#define PRPMC1100_PCI_INTB_PIN 10 -#define PRPMC1100_PCI_INTC_PIN 9 -#define PRPMC1100_PCI_INTD_PIN 8 - - diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/include/asm-arm/arch-ixp4xx/qmgr.h deleted file mode 100644 index 1e52b95cede..00000000000 --- a/include/asm-arm/arch-ixp4xx/qmgr.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright (C) 2007 Krzysztof Halasa - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - */ - -#ifndef IXP4XX_QMGR_H -#define IXP4XX_QMGR_H - -#include -#include - -#define HALF_QUEUES 32 -#define QUEUES 64 /* only 32 lower queues currently supported */ -#define MAX_QUEUE_LENGTH 4 /* in dwords */ - -#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ -#define QUEUE_STAT1_NEARLY_EMPTY 2 -#define QUEUE_STAT1_NEARLY_FULL 4 -#define QUEUE_STAT1_FULL 8 -#define QUEUE_STAT2_UNDERFLOW 1 -#define QUEUE_STAT2_OVERFLOW 2 - -#define QUEUE_WATERMARK_0_ENTRIES 0 -#define QUEUE_WATERMARK_1_ENTRY 1 -#define QUEUE_WATERMARK_2_ENTRIES 2 -#define QUEUE_WATERMARK_4_ENTRIES 3 -#define QUEUE_WATERMARK_8_ENTRIES 4 -#define QUEUE_WATERMARK_16_ENTRIES 5 -#define QUEUE_WATERMARK_32_ENTRIES 6 -#define QUEUE_WATERMARK_64_ENTRIES 7 - -/* queue interrupt request conditions */ -#define QUEUE_IRQ_SRC_EMPTY 0 -#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 -#define QUEUE_IRQ_SRC_NEARLY_FULL 2 -#define QUEUE_IRQ_SRC_FULL 3 -#define QUEUE_IRQ_SRC_NOT_EMPTY 4 -#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 -#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 -#define QUEUE_IRQ_SRC_NOT_FULL 7 - -struct qmgr_regs { - u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ - u32 stat1[4]; /* 0x400 - 0x40F */ - u32 stat2[2]; /* 0x410 - 0x417 */ - u32 statne_h; /* 0x418 - queue nearly empty */ - u32 statf_h; /* 0x41C - queue full */ - u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ - u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ - u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ - u32 reserved[1776]; - u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ -}; - -void qmgr_set_irq(unsigned int queue, int src, - void (*handler)(void *pdev), void *pdev); -void qmgr_enable_irq(unsigned int queue); -void qmgr_disable_irq(unsigned int queue); - -/* request_ and release_queue() must be called from non-IRQ context */ -int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark); -void qmgr_release_queue(unsigned int queue); - - -static inline void qmgr_put_entry(unsigned int queue, u32 val) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - __raw_writel(val, &qmgr_regs->acc[queue][0]); -} - -static inline u32 qmgr_get_entry(unsigned int queue) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - return __raw_readl(&qmgr_regs->acc[queue][0]); -} - -static inline int qmgr_get_stat1(unsigned int queue) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) - >> ((queue & 7) << 2)) & 0xF; -} - -static inline int qmgr_get_stat2(unsigned int queue) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) - >> ((queue & 0xF) << 1)) & 0x3; -} - -static inline int qmgr_stat_empty(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY); -} - -static inline int qmgr_stat_nearly_empty(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY); -} - -static inline int qmgr_stat_nearly_full(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL); -} - -static inline int qmgr_stat_full(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL); -} - -static inline int qmgr_stat_underflow(unsigned int queue) -{ - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW); -} - -static inline int qmgr_stat_overflow(unsigned int queue) -{ - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW); -} - -#endif diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h deleted file mode 100644 index f11b92262a0..00000000000 --- a/include/asm-arm/arch-ixp4xx/system.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/system.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(0); -#endif -} - - -static inline void arch_reset(char mode) -{ - if ( 1 && mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Use on-chip reset capability */ - - /* set the "key" register to enable access to - * "timer" and "enable" registers - */ - *IXP4XX_OSWK = IXP4XX_WDT_KEY; - - /* write 0 to the timer register for an immediate reset */ - *IXP4XX_OSWT = 0; - - *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; - } -} - diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h deleted file mode 100644 index c2559e28cbc..00000000000 --- a/include/asm-arm/arch-ixp4xx/timex.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/timex.h - * - */ - -#include - -/* - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. - */ -#define FREQ 66666666 -#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h deleted file mode 100644 index dbdec36ff0d..00000000000 --- a/include/asm-arm/arch-ixp4xx/udc.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/udc.h - * - */ -#include - -extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); - diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h deleted file mode 100644 index 34ef48fe327..00000000000 --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/uncompress.h - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ARCH_UNCOMPRESS_H_ -#define _ARCH_UNCOMPRESS_H_ - -#include "ixp4xx-regs.h" -#include -#include - -#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) - -static volatile u32* uart_base; - -static inline void putc(int c) -{ - /* Check THRE and TEMT bits before we transmit the character. - */ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - - *uart_base = c; -} - -static void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - /* - * Some boards are using UART2 as console - */ - if (machine_is_adi_coyote() || machine_is_gtwx5715() || - machine_is_gateway7001() || machine_is_wg302v2()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; -} - -/* - * arch_id is a variable in decompress_kernel() - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h deleted file mode 100644 index 050d46e6b12..00000000000 --- a/include/asm-arm/arch-ixp4xx/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/vmalloc.h - */ -#define VMALLOC_END (0xFF000000) - diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S deleted file mode 100644 index f55fb8ad9ee..00000000000 --- a/include/asm-arm/arch-kirkwood/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE - ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-kirkwood/dma.h b/include/asm-arm/arch-kirkwood/dma.h deleted file mode 100644 index 40a8c178f10..00000000000 --- a/include/asm-arm/arch-kirkwood/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S deleted file mode 100644 index fc6a43d9355..00000000000 --- a/include/asm-arm/arch-kirkwood/entry-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Kirkwood platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 - ands \irqstat, \irqstat, \tmp - bne 1001f - - @ if no low interrupts set, check high interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF] - mov \irqnr, #63 - ands \irqstat, \irqstat, \tmp - - @ find first active interrupt source -1001: clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h deleted file mode 100644 index e695719771a..00000000000 --- a/include/asm-arm/arch-kirkwood/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "kirkwood.h" - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */ - - -#endif diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h deleted file mode 100644 index 0ef6e95f5d5..00000000000 --- a/include/asm-arm/arch-kirkwood/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "kirkwood.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE) - + KIRKWOOD_PCIE_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h deleted file mode 100644 index 2e7b5da6335..00000000000 --- a/include/asm-arm/arch-kirkwood/irqs.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/irqs.h - * - * IRQ definitions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "kirkwood.h" /* need GPIO_MAX */ - -/* - * Low Interrupt Controller - */ -#define IRQ_KIRKWOOD_HIGH_SUM 0 -#define IRQ_KIRKWOOD_BRIDGE 1 -#define IRQ_KIRKWOOD_HOST2CPU 2 -#define IRQ_KIRKWOOD_CPU2HOST 3 -#define IRQ_KIRKWOOD_XOR_00 5 -#define IRQ_KIRKWOOD_XOR_01 6 -#define IRQ_KIRKWOOD_XOR_10 7 -#define IRQ_KIRKWOOD_XOR_11 8 -#define IRQ_KIRKWOOD_PCIE 9 -#define IRQ_KIRKWOOD_GE00_SUM 11 -#define IRQ_KIRKWOOD_GE01_SUM 15 -#define IRQ_KIRKWOOD_USB 19 -#define IRQ_KIRKWOOD_SATA 21 -#define IRQ_KIRKWOOD_CRYPTO 22 -#define IRQ_KIRKWOOD_SPI 23 -#define IRQ_KIRKWOOD_I2S 24 -#define IRQ_KIRKWOOD_TS_0 26 -#define IRQ_KIRKWOOD_SDIO 28 -#define IRQ_KIRKWOOD_TWSI 29 -#define IRQ_KIRKWOOD_AVB 30 -#define IRQ_KIRKWOOD_TDMI 31 - -/* - * High Interrupt Controller - */ -#define IRQ_KIRKWOOD_UART_0 33 -#define IRQ_KIRKWOOD_UART_1 34 -#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35 -#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36 -#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37 -#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38 -#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39 -#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40 -#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41 - -/* - * KIRKWOOD General Purpose Pins - */ -#define IRQ_KIRKWOOD_GPIO_START 64 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h deleted file mode 100644 index bb31b315c35..00000000000 --- a/include/asm-arm/arch-kirkwood/kirkwood.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/kirkwood.h - * - * Generic definitions for Marvell Kirkwood SoC flavors: - * 88F6180, 88F6192 and 88F6281. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_KIRKWOOD_H -#define __ASM_ARCH_KIRKWOOD_H - -/* - * Marvell Kirkwood address maps. - * - * phys - * e0000000 PCIe Memory space - * f1000000 on-chip peripheral registers - * f2000000 PCIe I/O space - * f3000000 NAND controller address window - * - * virt phys size - * fee00000 f1000000 1M on-chip peripheral registers - * fef00000 f2000000 1M PCIe I/O space - */ - -#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K - * is the minimal window size - */ - -#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 -#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 -#define KIRKWOOD_PCIE_IO_SIZE SZ_1M - -#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000 -#define KIRKWOOD_REGS_SIZE SZ_1M - -#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M - -/* - * MBUS bridge registers. - */ -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -/* - * Register Map - */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) - - -#define GPIO_MAX 50 - - -#endif diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h deleted file mode 100644 index e5108f408ce..00000000000 --- a/include/asm-arm/arch-kirkwood/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h deleted file mode 100644 index 8dde7e37985..00000000000 --- a/include/asm-arm/arch-kirkwood/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h deleted file mode 100644 index 82122e134e3..00000000000 --- a/include/asm-arm/arch-kirkwood/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define KIRKWOOD_TCLK 166666667 diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h deleted file mode 100644 index a9062b6d768..00000000000 --- a/include/asm-arm/arch-kirkwood/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h deleted file mode 100644 index 41852c6e77f..00000000000 --- a/include/asm-arm/arch-kirkwood/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000 diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S deleted file mode 100644 index d2583ffffa9..00000000000 --- a/include/asm-arm/arch-ks8695/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/debug-macro.S - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Debug macros - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KS8695_UART_PA @ physical base address - ldrne \rx, =KS8695_UART_VA @ virtual base address - .endm - - .macro senduart, rd, rx - str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register - .endm - - .macro busyuart, rd, rx -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register - tst \rd, #URLS_URTE @ Holding & Shift registers empty? - beq 1001b - .endm - - .macro waituart, rd, rx -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register - tst \rd, #URLS_URTHRE @ Holding Register empty? - beq 1001b - .endm diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h deleted file mode 100644 index 7ad2c656e16..00000000000 --- a/include/asm-arm/arch-ks8695/devices.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/devices.h - * - * Copyright (C) 2006 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_DEVICES_H -#define __ASM_ARCH_DEVICES_H - -#include - - /* Ethernet */ -extern void __init ks8695_add_device_wan(void); -extern void __init ks8695_add_device_lan(void); -extern void __init ks8695_add_device_hpna(void); - - /* LEDs */ -extern short ks8695_leds_cpu; -extern short ks8695_leds_timer; -extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led); - - /* PCI */ -#define KS8695_MODE_PCI 0 -#define KS8695_MODE_MINIPCI 1 -#define KS8695_MODE_CARDBUS 2 - -struct ks8695_pci_cfg { - short mode; - int (*map_irq)(struct pci_dev *, u8, u8); -}; -extern __init void ks8695_init_pci(struct ks8695_pci_cfg *); - -#endif diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h deleted file mode 100644 index e5159ed42a4..00000000000 --- a/include/asm-arm/arch-ks8695/dma.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/dma.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S deleted file mode 100644 index 3993cfe67cf..00000000000 --- a/include/asm-arm/arch-ks8695/entry-macro.S +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/entry-macro.S - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * Low-level IRQ helper macros for KS8695 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register - - teq \irqstat, #0 - beq 1001f - - mov \irqnr, #0 - - tst \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tst \irqstat, #0x0f - moveq \irqstat, \irqstat, lsr #4 - addeq \irqnr, \irqnr, #4 - tst \irqstat, #0x03 - moveq \irqstat, \irqstat, lsr #2 - addeq \irqnr, \irqnr, #2 - tst \irqstat, #0x01 - addeqs \irqnr, \irqnr, #1 -1001: - .endm diff --git a/include/asm-arm/arch-ks8695/gpio.h b/include/asm-arm/arch-ks8695/gpio.h deleted file mode 100644 index 65ceea28607..00000000000 --- a/include/asm-arm/arch-ks8695/gpio.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/gpio.h - * - * Copyright (C) 2006 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_GPIO_H_ -#define __ASM_ARCH_GPIO_H_ - -#define KS8695_GPIO_0 0 -#define KS8695_GPIO_1 1 -#define KS8695_GPIO_2 2 -#define KS8695_GPIO_3 3 -#define KS8695_GPIO_4 4 -#define KS8695_GPIO_5 5 -#define KS8695_GPIO_6 6 -#define KS8695_GPIO_7 7 -#define KS8695_GPIO_8 8 -#define KS8695_GPIO_9 9 -#define KS8695_GPIO_10 10 -#define KS8695_GPIO_11 11 -#define KS8695_GPIO_12 12 -#define KS8695_GPIO_13 13 -#define KS8695_GPIO_14 14 -#define KS8695_GPIO_15 15 - - -/* - * Configure GPIO pin as external interrupt source. - */ -int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type); - -/* - * Configure the GPIO line as an input. - */ -int __init_or_module gpio_direction_input(unsigned int pin); - -/* - * Configure the GPIO line as an output, with default state. - */ -int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state); - -/* - * Set the state of an output GPIO line. - */ -void gpio_set_value(unsigned int pin, unsigned int state); - -/* - * Read the state of a GPIO line. - */ -int gpio_get_value(unsigned int pin); - -/* - * Map GPIO line to IRQ number. - */ -int gpio_to_irq(unsigned int pin); - -/* - * Map IRQ number to GPIO line. - */ -int irq_to_gpio(unsigned int irq); - - -#include - -static inline int gpio_request(unsigned int pin, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned int pin) -{ -} - -#endif diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h deleted file mode 100644 index cb732bff328..00000000000 --- a/include/asm-arm/arch-ks8695/hardware.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/hardware.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Memory Map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* - * Physical RAM address. - */ -#define KS8695_SDRAM_PA 0x00000000 - - -/* - * We map an entire MiB with the System Configuration Registers in even - * though only 64KiB is needed. This makes it easier for use with the - * head debug code as the initial MMU setup only deals in L1 sections. - */ -#define KS8695_IO_PA 0x03F00000 -#define KS8695_IO_VA 0xF0000000 -#define KS8695_IO_SIZE SZ_1M - -#define KS8695_PCIMEM_PA 0x60000000 -#define KS8695_PCIMEM_SIZE SZ_512M - -#define KS8695_PCIIO_PA 0x80000000 -#define KS8695_PCIIO_SIZE SZ_64K - - -/* - * PCI support - */ -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0 -#define PCIBIOS_MIN_MEM 0 - -#endif diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h deleted file mode 100644 index 8edc4bd6aad..00000000000 --- a/include/asm-arm/arch-ks8695/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/io.h - * - * Copyright (C) 2006 Andrew Victor - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h deleted file mode 100644 index 8b1c4fe96a8..00000000000 --- a/include/asm-arm/arch-ks8695/irqs.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-arm/arch-ks8695/irqs.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define NR_IRQS 32 - -/* - * IRQ definitions - */ -#define KS8695_IRQ_COMM_RX 0 -#define KS8695_IRQ_COMM_TX 1 -#define KS8695_IRQ_EXTERN0 2 -#define KS8695_IRQ_EXTERN1 3 -#define KS8695_IRQ_EXTERN2 4 -#define KS8695_IRQ_EXTERN3 5 -#define KS8695_IRQ_TIMER0 6 -#define KS8695_IRQ_TIMER1 7 -#define KS8695_IRQ_UART_TX 8 -#define KS8695_IRQ_UART_RX 9 -#define KS8695_IRQ_UART_LINE_STATUS 10 -#define KS8695_IRQ_UART_MODEM_STATUS 11 -#define KS8695_IRQ_LAN_RX_STOP 12 -#define KS8695_IRQ_LAN_TX_STOP 13 -#define KS8695_IRQ_LAN_RX_BUF 14 -#define KS8695_IRQ_LAN_TX_BUF 15 -#define KS8695_IRQ_LAN_RX_STATUS 16 -#define KS8695_IRQ_LAN_TX_STATUS 17 -#define KS8695_IRQ_HPNA_RX_STOP 18 -#define KS8695_IRQ_HPNA_TX_STOP 19 -#define KS8695_IRQ_HPNA_RX_BUF 20 -#define KS8695_IRQ_HPNA_TX_BUF 21 -#define KS8695_IRQ_HPNA_RX_STATUS 22 -#define KS8695_IRQ_HPNA_TX_STATUS 23 -#define KS8695_IRQ_BUS_ERROR 24 -#define KS8695_IRQ_WAN_RX_STOP 25 -#define KS8695_IRQ_WAN_TX_STOP 26 -#define KS8695_IRQ_WAN_RX_BUF 27 -#define KS8695_IRQ_WAN_TX_BUF 28 -#define KS8695_IRQ_WAN_RX_STATUS 29 -#define KS8695_IRQ_WAN_TX_STATUS 30 -#define KS8695_IRQ_WAN_LINK 31 - -#endif diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h deleted file mode 100644 index 1b542f77977..00000000000 --- a/include/asm-arm/arch-ks8695/memory.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/memory.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 Memory definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical SRAM offset. - */ -#define PHYS_OFFSET KS8695_SDRAM_PA - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_PCI - -/* PCI mappings */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA) -#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET) - -/* Platform-bus mapping */ -extern struct bus_type platform_bus_type; -#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type) -#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \ - __phys_to_virt(x) : __bus_to_virt(x); }) -#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \ - (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); }) -#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x)) - -#else - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif - -#endif - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h deleted file mode 100644 index 6b95d77aea1..00000000000 --- a/include/asm-arm/arch-ks8695/regs-gpio.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-gpio.h - * - * Copyright (C) 2007 Andrew Victor - * - * KS8695 - GPIO control registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_GPIO_H -#define KS8695_GPIO_H - -#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600) -#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET) -#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET) - - -#define KS8695_IOPM (0x00) /* I/O Port Mode Register */ -#define KS8695_IOPC (0x04) /* I/O Port Control Register */ -#define KS8695_IOPD (0x08) /* I/O Port Data Register */ - - -/* Port Mode Register */ -#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */ - -/* Port Control Register */ -#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */ -#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */ -#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */ -#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */ -#define IOPC_IOEINT3_MODE(x) ((x) << 12) -#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */ -#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */ -#define IOPC_IOEINT2_MODE(x) ((x) << 8) -#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */ -#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */ -#define IOPC_IOEINT1_MODE(x) ((x) << 4) -#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */ -#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */ -#define IOPC_IOEINT0_MODE(x) ((x) << 0) - - /* Trigger Modes */ -#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */ -#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */ -#define IOPC_TM_RISING (2) /* Rising Edge Detection */ -#define IOPC_TM_FALLING (4) /* Falling Edge Detection */ -#define IOPC_TM_EDGE (6) /* Both Edge Detection */ - -/* Port Data Register */ -#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */ - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/include/asm-arm/arch-ks8695/regs-hpna.h deleted file mode 100644 index 14091cdec10..00000000000 --- a/include/asm-arm/arch-ks8695/regs-hpna.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-wan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - HPNA Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_HPNA_H -#define KS8695_HPNA_H - -#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000) -#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET) -#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET) - - -/* - * HPNA registers - */ - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h deleted file mode 100644 index 70b193f6b75..00000000000 --- a/include/asm-arm/arch-ks8695/regs-irq.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-irq.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - IRQ registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_IRQ_H -#define KS8695_IRQ_H - -#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200) -#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET) -#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET) - - -/* - * Interrupt Controller registers - */ -#define KS8695_INTMC (0x00) /* Mode Control Register */ -#define KS8695_INTEN (0x04) /* Interrupt Enable Register */ -#define KS8695_INTST (0x08) /* Interrupt Status Register */ -#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */ -#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */ -#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */ -#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */ -#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */ -#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */ -#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */ -#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */ -#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */ -#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */ -#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/include/asm-arm/arch-ks8695/regs-lan.h deleted file mode 100644 index a63bd61c64e..00000000000 --- a/include/asm-arm/arch-ks8695/regs-lan.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-lan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - LAN Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_LAN_H -#define KS8695_LAN_H - -#define KS8695_LAN_OFFSET (0xF0000 + 0x8000) -#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET) -#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET) - - -/* - * LAN registers - */ -#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */ -#define KS8695_LMDRXC (0x04) /* DMA Receive Control */ -#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */ -#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */ -#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */ -#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */ -#define KS8695_LMAL (0x18) /* MAC Station Address Low */ -#define KS8695_LMAH (0x1c) /* MAC Station Address High */ -#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */ -#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */ - - -/* DMA Transmit Control Register */ -#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */ -#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */ -#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */ -#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */ -#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */ -#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */ -#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */ -#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */ -#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */ -#define LMDTXC_LMTE (1 << 0) /* TX Enable */ - -/* DMA Receive Control Register */ -#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */ -#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */ -#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */ -#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */ -#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */ -#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */ -#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */ -#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */ -#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */ -#define LMDRXC_LMRA (1 << 2) /* Receive All */ -#define LMDRXC_LMRE (1 << 1) /* RX Enable */ - -/* Additional Station Address High */ -#define LMAAH_E (1 << 31) /* Address Enabled */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h deleted file mode 100644 index 76b38e0862e..00000000000 --- a/include/asm-arm/arch-ks8695/regs-mem.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-mem.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Memory Controller registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_MEM_H -#define KS8695_MEM_H - -#define KS8695_MEM_OFFSET (0xF0000 + 0x4000) -#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET) -#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET) - - -/* - * Memory Controller Registers - */ -#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */ -#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */ -#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */ -#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */ -#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */ -#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */ -#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */ -#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */ -#define KS8695_SDGCON (0x38) /* SDRAM General Control */ -#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */ -#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */ - - -/* External I/O Access Control Registers */ -#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */ -#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */ -#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */ -#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */ -#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */ -#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */ - -/* ROM/SRAM/Flash Control Register */ -#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */ -#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */ -#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */ -#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */ -#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */ -#define PMC_NORMAL (0 << 0) -#define PMC_4WORD (1 << 0) -#define PMC_8WORD (2 << 0) -#define PMC_16WORD (3 << 0) - -/* External I/O and ROM/SRAM/Flash General Register */ -#define ERGCON_TMULT (3 << 28) /* Time Multiplier */ -#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */ -#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */ -#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */ -#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */ -#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */ - -/* SDRAM Control Register */ -#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */ -#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */ -#define SDCON_DBCAB (3 << 8) /* Column Address Bits */ -#define SDCON_DBBNUM (1 << 3) /* Number of Banks */ -#define SDCON_DBDBW (3 << 1) /* Data Bus Width */ - -/* SDRAM General Control Register */ -#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */ -#define SDGCON_SDCAS (3 << 0) /* CAS latency */ - -/* SDRAM Buffer Control Register */ -#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */ -#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */ -#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */ -#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */ -#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */ -#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */ -#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */ -#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */ - -/* SDRAM Refresh Timer Register */ -#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/include/asm-arm/arch-ks8695/regs-misc.h deleted file mode 100644 index 632ca6601a9..00000000000 --- a/include/asm-arm/arch-ks8695/regs-misc.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-misc.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Miscellaneous Registers - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_MISC_H -#define KS8695_MISC_H - -#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00) -#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET) -#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET) - - -/* - * Miscellaneous registers - */ -#define KS8695_DID (0x00) /* Device ID */ -#define KS8695_RID (0x04) /* Revision ID */ -#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */ -#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */ -#define KS8695_WPPM (0x10) /* WAN PHY Power Management */ -#define KS8695_PPS (0x1c) /* PHY PowerSave */ - -/* Device ID Register */ -#define DID_ID (0xffff << 0) /* Device ID */ - -/* Revision ID Register */ -#define RID_SUBID (0xf << 4) /* Sub-Device ID */ -#define RID_REVISION (0xf << 0) /* Revision ID */ - -/* HPNA Miscellaneous Control Register */ -#define HMC_HSS (1 << 1) /* Speed */ -#define HMC_HDS (1 << 0) /* Duplex */ - -/* WAN Miscellaneous Control Register */ -#define WMC_WANC (1 << 30) /* Auto-negotiation complete */ -#define WMC_WANR (1 << 29) /* Auto-negotiation restart */ -#define WMC_WANAP (1 << 28) /* Advertise Pause */ -#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */ -#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */ -#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */ -#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */ -#define WMC_WLS (1 << 23) /* Link status */ -#define WMC_WDS (1 << 22) /* Duplex status */ -#define WMC_WSS (1 << 21) /* Speed status */ -#define WMC_WLPP (1 << 20) /* Link Partner Pause */ -#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */ -#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */ -#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */ -#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */ -#define WMC_WAND (1 << 15) /* Auto-negotiation disable */ -#define WMC_WANF100 (1 << 14) /* Force 100 */ -#define WMC_WANFF (1 << 13) /* Force FDX */ -#define WMC_WLED1S (7 << 4) /* LED1 Select */ -#define WLED1S_SPEED (0 << 4) -#define WLED1S_LINK (1 << 4) -#define WLED1S_DUPLEX (2 << 4) -#define WLED1S_COLLISION (3 << 4) -#define WLED1S_ACTIVITY (4 << 4) -#define WLED1S_FDX_COLLISION (5 << 4) -#define WLED1S_LINK_ACTIVITY (6 << 4) -#define WMC_WLED0S (7 << 0) /* LED0 Select */ -#define WLED0S_SPEED (0 << 0) -#define WLED0S_LINK (1 << 0) -#define WLED0S_DUPLEX (2 << 0) -#define WLED0S_COLLISION (3 << 0) -#define WLED0S_ACTIVITY (4 << 0) -#define WLED0S_FDX_COLLISION (5 << 0) -#define WLED0S_LINK_ACTIVITY (6 << 0) - -/* WAN PHY Power Management Register */ -#define WPPM_WLPBK (1 << 14) /* Local Loopback */ -#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */ -#define WPPM_WPI (1 << 12) /* PHY isolate */ -#define WPPM_WFL (1 << 10) /* Force link */ -#define WPPM_MDIXS (1 << 9) /* MDIX Status */ -#define WPPM_FEF (1 << 8) /* Far End Fault */ -#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */ -#define WPPM_TXDIS (1 << 6) /* Disable transmitter */ -#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */ -#define WPPM_PD (1 << 4) /* Power Down */ -#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */ -#define WPPM_FMDX (1 << 2) /* Force MDIX */ -#define WPPM_LPBK (1 << 1) /* MAX Loopback */ - -/* PHY Power Save Register */ -#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/include/asm-arm/arch-ks8695/regs-pci.h deleted file mode 100644 index 286d6d488df..00000000000 --- a/include/asm-arm/arch-ks8695/regs-pci.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-pci.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - PCI bridge registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define KS8695_PCI_OFFSET (0xF0000 + 0x2000) -#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET) -#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET) - - -#define KS8695_CRCFID (0x000) /* Configuration: Identification */ -#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */ -#define KS8695_CRCFRV (0x008) /* Configuration: Revision */ -#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */ -#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */ -#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */ -#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */ -#define KS8695_PBCA (0x100) /* Bridge Configuration Address */ -#define KS8695_PBCD (0x104) /* Bridge Configuration Data */ -#define KS8695_PBM (0x200) /* Bridge Mode */ -#define KS8695_PBCS (0x204) /* Bridge Control and Status */ -#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */ -#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */ -#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */ -#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */ -#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */ -#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */ -#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */ -#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */ - - -/* Configuration: Identification */ - -/* Configuration: Command and Status */ - -/* Configuration: Revision */ - - - -#define CFRV_GUEST (1 << 23) - -#define PBCA_TYPE1 (1) -#define PBCA_ENABLE (1 << 31) - - diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/include/asm-arm/arch-ks8695/regs-switch.h deleted file mode 100644 index 5f37be3f2f6..00000000000 --- a/include/asm-arm/arch-ks8695/regs-switch.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-switch.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Switch Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_SWITCH_H -#define KS8695_SWITCH_H - -#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800) -#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET) -#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET) - - -/* - * Switch registers - */ -#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */ -#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ -#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ - -#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ - -#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ -#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ -#define KS8695_SEIAC (0x50) /* Indirect Access Control */ -#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */ -#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */ -#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */ -#define KS8695_SEAFC (0x60) /* Advance Feature Control */ -#define KS8695_SEDSCPH (0x64) /* TOS Priority High */ -#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */ -#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */ -#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */ -#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */ -#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */ - - -/* Switch Engine Control 0 */ -#define SEC0_LLED1S (7 << 25) /* LED1 Select */ -#define LLED1S_SPEED (0 << 25) -#define LLED1S_LINK (1 << 25) -#define LLED1S_DUPLEX (2 << 25) -#define LLED1S_COLLISION (3 << 25) -#define LLED1S_ACTIVITY (4 << 25) -#define LLED1S_FDX_COLLISION (5 << 25) -#define LLED1S_LINK_ACTIVITY (6 << 25) -#define SEC0_LLED0S (7 << 22) /* LED0 Select */ -#define LLED0S_SPEED (0 << 22) -#define LLED0S_LINK (1 << 22) -#define LLED0S_DUPLEX (2 << 22) -#define LLED0S_COLLISION (3 << 22) -#define LLED0S_ACTIVITY (4 << 22) -#define LLED0S_FDX_COLLISION (5 << 22) -#define LLED0S_LINK_ACTIVITY (6 << 22) -#define SEC0_ENABLE (1 << 0) /* Enable Switch */ - - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/include/asm-arm/arch-ks8695/regs-sys.h deleted file mode 100644 index f3179815b8e..00000000000 --- a/include/asm-arm/arch-ks8695/regs-sys.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-sys.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - System control registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_SYS_H -#define KS8695_SYS_H - -#define KS8695_SYS_OFFSET (0xF0000 + 0x0000) -#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET) -#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET) - - -#define KS8695_SYSCFG (0x00) /* System Configuration Register */ -#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */ - - -/* System Configuration Register */ -#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */ - -/* System Clock and Bus Control Register */ -#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */ -#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/include/asm-arm/arch-ks8695/regs-timer.h deleted file mode 100644 index 0a9f7f99ec5..00000000000 --- a/include/asm-arm/arch-ks8695/regs-timer.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-timer.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Timer registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_TIMER_H -#define KS8695_TIMER_H - -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) -#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) - - -/* - * Timer registers - */ -#define KS8695_TMCON (0x00) /* Timer Control Register */ -#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ -#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ -#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ - - -/* Timer Control Register */ -#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ - -/* Timer0 Timeout Counter Register */ -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/include/asm-arm/arch-ks8695/regs-uart.h deleted file mode 100644 index a27cb20502a..00000000000 --- a/include/asm-arm/arch-ks8695/regs-uart.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/include/asm-arm/arch-ks8695/regs-uart.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - UART register and bit definitions. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef KS8695_UART_H -#define KS8695_UART_H - -#define KS8695_UART_OFFSET (0xF0000 + 0xE000) -#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET) -#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET) - - -/* - * UART registers - */ -#define KS8695_URRB (0x00) /* Receive Buffer Register */ -#define KS8695_URTH (0x04) /* Transmit Holding Register */ -#define KS8695_URFC (0x08) /* FIFO Control Register */ -#define KS8695_URLC (0x0C) /* Line Control Register */ -#define KS8695_URMC (0x10) /* Modem Control Register */ -#define KS8695_URLS (0x14) /* Line Status Register */ -#define KS8695_URMS (0x18) /* Modem Status Register */ -#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */ -#define KS8695_USR (0x20) /* Status Register */ - - -/* FIFO Control Register */ -#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */ -#define URFC_URFRT_1 (0 << 6) -#define URFC_URFRT_4 (1 << 6) -#define URFC_URFRT_8 (2 << 6) -#define URFC_URFRT_14 (3 << 6) -#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */ -#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */ -#define URFC_URFE (1 << 0) /* FIFO Enable */ - -/* Line Control Register */ -#define URLC_URSBC (1 << 6) /* Set Break Condition */ -#define URLC_PARITY (7 << 3) /* Parity */ -#define URPE_NONE (0 << 3) -#define URPE_ODD (1 << 3) -#define URPE_EVEN (3 << 3) -#define URPE_MARK (5 << 3) -#define URPE_SPACE (7 << 3) -#define URLC_URSB (1 << 2) /* Stop Bits */ -#define URLC_URCL (3 << 0) /* Character Length */ -#define URCL_5 (0 << 0) -#define URCL_6 (1 << 0) -#define URCL_7 (2 << 0) -#define URCL_8 (3 << 0) - -/* Modem Control Register */ -#define URMC_URLB (1 << 4) /* Loop-back mode */ -#define URMC_UROUT2 (1 << 3) /* OUT2 signal */ -#define URMC_UROUT1 (1 << 2) /* OUT1 signal */ -#define URMC_URRTS (1 << 1) /* Request to Send */ -#define URMC_URDTR (1 << 0) /* Data Terminal Ready */ - -/* Line Status Register */ -#define URLS_URRFE (1 << 7) /* Receive FIFO Error */ -#define URLS_URTE (1 << 6) /* Transmit Empty */ -#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */ -#define URLS_URBI (1 << 4) /* Break Interrupt */ -#define URLS_URFE (1 << 3) /* Framing Error */ -#define URLS_URPE (1 << 2) /* Parity Error */ -#define URLS_URROE (1 << 1) /* Receive Overrun Error */ -#define URLS_URDR (1 << 0) /* Receive Data Ready */ - -/* Modem Status Register */ -#define URMS_URDCD (1 << 7) /* Data Carrier Detect */ -#define URMS_URRI (1 << 6) /* Ring Indicator */ -#define URMS_URDSR (1 << 5) /* Data Set Ready */ -#define URMS_URCTS (1 << 4) /* Clear to Send */ -#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */ -#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */ -#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */ - -/* Status Register */ -#define USR_UTI (1 << 0) /* Timeout Indication */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/include/asm-arm/arch-ks8695/regs-wan.h deleted file mode 100644 index 52e35b0d65e..00000000000 --- a/include/asm-arm/arch-ks8695/regs-wan.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-wan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - WAN Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_WAN_H -#define KS8695_WAN_H - -#define KS8695_WAN_OFFSET (0xF0000 + 0x6000) -#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET) -#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET) - - -/* - * WAN registers - */ -#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */ -#define KS8695_WMDRXC (0x04) /* DMA Receive Control */ -#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */ -#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */ -#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */ -#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */ -#define KS8695_WMAL (0x18) /* MAC Station Address Low */ -#define KS8695_WMAH (0x1c) /* MAC Station Address High */ -#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */ -#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */ - - -/* DMA Transmit Control Register */ -#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */ -#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */ -#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */ -#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */ -#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */ -#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */ -#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */ -#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */ -#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */ -#define WMDTXC_WMTE (1 << 0) /* TX Enable */ - -/* DMA Receive Control Register */ -#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */ -#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */ -#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */ -#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */ -#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */ -#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */ -#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */ -#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */ -#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */ -#define WMDRXC_WMRA (1 << 2) /* Receive All */ -#define WMDRXC_WMRE (1 << 0) /* RX Enable */ - -/* Additional Station Address High */ -#define WMAAH_E (1 << 31) /* Address Enabled */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h deleted file mode 100644 index 3bc28106d93..00000000000 --- a/include/asm-arm/arch-ks8695/system.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-s3c2410/system.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * KS8695 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks, - */ - cpu_do_idle(); - -} - -static void arch_reset(char mode) -{ - unsigned int reg; - - if (mode == 's') - cpu_reset(0); - - /* disable timer0 */ - reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - - /* enable watchdog mode */ - __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); - - /* re-enable timer0 */ - __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); -} - -#endif diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h deleted file mode 100644 index 8320d528b90..00000000000 --- a/include/asm-arm/arch-ks8695/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/timex.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * KS8695 - Time Parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* timers are derived from MCLK, which is 25MHz */ -#define CLOCK_TICK_RATE 25000000 - -#endif diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h deleted file mode 100644 index 733a50855b5..00000000000 --- a/include/asm-arm/arch-ks8695/uncompress.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/uncompress.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Kernel uncompressor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -static void putc(char c) -{ - while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE)) - barrier(); - - __raw_writel(c, KS8695_UART_PA + KS8695_URTH); -} - -static inline void flush(void) -{ - while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE)) - barrier(); -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h deleted file mode 100644 index d1d88e58117..00000000000 --- a/include/asm-arm/arch-ks8695/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/vmalloc.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 vmalloc definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK) - -#endif diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h deleted file mode 100644 index 762cbc76c50..00000000000 --- a/include/asm-arm/arch-l7200/aux_reg.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/aux_reg.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 08-02-2000 SJH Created file - */ -#ifndef _ASM_ARCH_AUXREG_H -#define _ASM_ARCH_AUXREG_H - -#include - -#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE)) - -/* - * Auxillary register values - */ -#define AUX_CLEAR 0x00000000 -#define AUX_DIAG_LED_ON 0x00000002 -#define AUX_RTS_UART1 0x00000004 -#define AUX_DTR_UART1 0x00000008 -#define AUX_KBD_COLUMN_12_HIGH 0x00000010 -#define AUX_KBD_COLUMN_12_OFF 0x00000020 -#define AUX_KBD_COLUMN_13_HIGH 0x00000040 -#define AUX_KBD_COLUMN_13_OFF 0x00000080 - -#endif diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S deleted file mode 100644 index 846473318e8..00000000000 --- a/include/asm-arm/arch-l7200/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-l7200/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00044000 @ UART1 -@ add \rx, \rx, #0x00045000 @ UART2 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h deleted file mode 100644 index 4c7eca63f03..00000000000 --- a/include/asm-arm/arch-l7200/dma.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/dma.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 08-29-2000 SJH Created - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* DMA is not yet implemented! It should be the same as acorn, copy over.. */ - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 - -#define DMA_S0 0 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S deleted file mode 100644 index d5e7294df1d..00000000000 --- a/include/asm-arm/arch-l7200/entry-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-arm/arch-l7200/entry-macro.S - * - * Low-level IRQ helper macros for L7200-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .equ irq_base_addr, IO_BASE_2 - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqstat, #irq_base_addr @ Virt addr IRQ regs - add \irqstat, \irqstat, #0x00001000 @ Status reg - ldr \irqstat, [\irqstat, #0] @ get interrupts - mov \irqnr, #0 -1001: tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tsteq \irqnr, #32 - beq 1001b - teq \irqnr, #32 - .endm - diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h deleted file mode 100644 index 6f20962df24..00000000000 --- a/include/asm-arm/arch-l7200/gp_timers.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/gp_timers.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 07-28-2000 SJH Created file - * 08-02-2000 SJH Used structure for registers - */ -#ifndef _ASM_ARCH_GPTIMERS_H -#define _ASM_ARCH_GPTIMERS_H - -#include - -/* - * Layout of L7200 general purpose timer registers - */ -struct GPT_Regs { - unsigned int TIMERLOAD; - unsigned int TIMERVALUE; - unsigned int TIMERCONTROL; - unsigned int TIMERCLEAR; -}; - -#define GPT_BASE (IO_BASE_2 + 0x3000) -#define l7200_timer1_regs ((volatile struct GPT_Regs *) (GPT_BASE)) -#define l7200_timer2_regs ((volatile struct GPT_Regs *) (GPT_BASE + 0x20)) - -/* - * General register values - */ -#define GPT_PRESCALE_1 0x00000000 -#define GPT_PRESCALE_16 0x00000004 -#define GPT_PRESCALE_256 0x00000008 -#define GPT_MODE_FREERUN 0x00000000 -#define GPT_MODE_PERIODIC 0x00000040 -#define GPT_ENABLE 0x00000080 -#define GPT_BZTOG 0x00000100 -#define GPT_BZMOD 0x00000200 -#define GPT_LOAD_MASK 0x0000ffff - -#endif diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h deleted file mode 100644 index 0b63e4239bd..00000000000 --- a/include/asm-arm/arch-l7200/gpio.h +++ /dev/null @@ -1,105 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/gpio.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * GPIO. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define GPIO_OFF 0x00005000 /* Offset from IO_START to the GPIO reg's. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */ -#define GPIO_BASE (IO_BASE_2 + GPIO_OFF) /* Virtual addr of the GPIO reg. */ - -/* Offsets from the start of the GPIO for all the registers. */ -#define PADR_OFF 0x000 -#define PADDR_OFF 0x004 -#define PASBSR_OFF 0x008 -#define PAEENR_OFF 0x00c -#define PAESNR_OFF 0x010 -#define PAESTR_OFF 0x014 -#define PAIMR_OFF 0x018 -#define PAINT_OFF 0x01c - -#define PBDR_OFF 0x020 -#define PBDDR_OFF 0x024 -#define PBSBSR_OFF 0x028 -#define PBIMR_OFF 0x038 -#define PBINT_OFF 0x03c - -#define PCDR_OFF 0x040 -#define PCDDR_OFF 0x044 -#define PCSBSR_OFF 0x048 -#define PCIMR_OFF 0x058 -#define PCINT_OFF 0x05c - -#define PDDR_OFF 0x060 -#define PDDDR_OFF 0x064 -#define PDSBSR_OFF 0x068 -#define PDEENR_OFF 0x06c -#define PDESNR_OFF 0x070 -#define PDESTR_OFF 0x074 -#define PDIMR_OFF 0x078 -#define PDINT_OFF 0x07c - -#define PEDR_OFF 0x080 -#define PEDDR_OFF 0x084 -#define PESBSR_OFF 0x088 -#define PEEENR_OFF 0x08c -#define PEESNR_OFF 0x090 -#define PEESTR_OFF 0x094 -#define PEIMR_OFF 0x098 -#define PEINT_OFF 0x09c - -/* Define the GPIO registers for use by device drivers and the kernel. */ -#define PADR (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF)) -#define PADDR (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF)) -#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF)) -#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF)) -#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF)) -#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF)) -#define PAIMR (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF)) -#define PAINT (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF)) - -#define PBDR (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF)) -#define PBDDR (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF)) -#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF)) -#define PBIMR (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF)) -#define PBINT (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF)) - -#define PCDR (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF)) -#define PCDDR (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF)) -#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF)) -#define PCIMR (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF)) -#define PCINT (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF)) - -#define PDDR (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF)) -#define PDDDR (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF)) -#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF)) -#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF)) -#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF)) -#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF)) -#define PDIMR (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF)) -#define PDINT (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF)) - -#define PEDR (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF)) -#define PEDDR (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF)) -#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF)) -#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF)) -#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF)) -#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF)) -#define PEIMR (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF)) -#define PEINT (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF)) - -#define VEE_EN 0x02 -#define BACKLIGHT_EN 0x04 diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h deleted file mode 100644 index 2ab43f3a4a8..00000000000 --- a/include/asm-arm/arch-l7200/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/hardware.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * This file contains the hardware definitions for the - * LinkUp Systems L7200 SOC development board. - * - * Changelog: - * 02-01-2000 RS Created L7200 version, derived from rpc code - * 03-21-2000 SJH Cleaned up file - * 04-21-2000 RS Changed mapping of I/O in virtual space - * 04-25-2000 SJH Removed unused symbols and such - * 05-05-2000 SJH Complete rewrite - * 07-31-2000 SJH Added undocumented debug auxillary port to - * get at last two columns for keyboard driver - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ -#define RAM_START 0xf0000000 -#define RAM_SIZE 0x02000000 -#define RAM_BASE 0xc0000000 - -#define IO_START 0x80000000 /* I/O */ -#define IO_SIZE 0x01000000 -#define IO_BASE 0xd0000000 - -#define IO_START_2 0x90000000 /* I/O */ -#define IO_SIZE_2 0x01000000 -#define IO_BASE_2 0xd1000000 - -#define AUX_START 0x1a000000 /* AUX PORT */ -#define AUX_SIZE 0x01000000 -#define AUX_BASE 0xd2000000 - -#define FLASH1_START 0x00000000 /* FLASH BANK 1 */ -#define FLASH1_SIZE 0x01000000 -#define FLASH1_BASE 0xd3000000 - -#define FLASH2_START 0x10000000 /* FLASH BANK 2 */ -#define FLASH2_SIZE 0x01000000 -#define FLASH2_BASE 0xd4000000 - -#define ISA_START 0x20000000 /* ISA */ -#define ISA_SIZE 0x20000000 -#define ISA_BASE 0xe0000000 - -#define PCIO_BASE IO_BASE - -#endif diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h deleted file mode 100644 index e24a10a7ed8..00000000000 --- a/include/asm-arm/arch-l7200/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/io.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 03-21-2000 SJH Created from linux/include/asm-arm/arch-nexuspci/io.h - * 08-31-2000 SJH Added in IO functions necessary for new drivers - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * There are not real ISA nor PCI buses, so we fake it. - */ -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h deleted file mode 100644 index 7120c016e29..00000000000 --- a/include/asm-arm/arch-l7200/irqs.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-arm/arch-l7200/irqs.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 01-02-2000 RS Create l7200 version - * 03-28-2000 SJH Removed unused interrupt - * 07-28-2000 SJH Added pseudo-keyboard interrupt - */ - -/* - * NOTE: The second timer (Timer 2) is used as the keyboard - * interrupt when the keyboard driver is enabled. - */ - -#define NR_IRQS 32 - -#define IRQ_STWDOG 0 /* Watchdog timer */ -#define IRQ_PROG 1 /* Programmable interrupt */ -#define IRQ_DEBUG_RX 2 /* Comm Rx debug */ -#define IRQ_DEBUG_TX 3 /* Comm Tx debug */ -#define IRQ_GCTC1 4 /* Timer 1 */ -#define IRQ_GCTC2 5 /* Timer 2 / Keyboard */ -#define IRQ_DMA 6 /* DMA controller */ -#define IRQ_CLCD 7 /* Color LCD controller */ -#define IRQ_SM_RX 8 /* Smart card */ -#define IRQ_SM_TX 9 /* Smart cart */ -#define IRQ_SM_RST 10 /* Smart card */ -#define IRQ_SIB 11 /* Serial Interface Bus */ -#define IRQ_MMC 12 /* MultiMediaCard */ -#define IRQ_SSP1 13 /* Synchronous Serial Port 1 */ -#define IRQ_SSP2 14 /* Synchronous Serial Port 1 */ -#define IRQ_SPI 15 /* SPI slave */ -#define IRQ_UART_1 16 /* UART 1 */ -#define IRQ_UART_2 17 /* UART 2 */ -#define IRQ_IRDA 18 /* IRDA */ -#define IRQ_RTC_TICK 19 /* Real Time Clock tick */ -#define IRQ_RTC_ALARM 20 /* Real Time Clock alarm */ -#define IRQ_GPIO 21 /* General Purpose IO */ -#define IRQ_GPIO_DMA 22 /* General Purpose IO, DMA */ -#define IRQ_M2M 23 /* Memory to memory DMA */ -#define IRQ_RESERVED 24 /* RESERVED, don't use */ -#define IRQ_INTF 25 /* External active low interrupt */ -#define IRQ_INT0 26 /* External active low interrupt */ -#define IRQ_INT1 27 /* External active low interrupt */ -#define IRQ_INT2 28 /* External active low interrupt */ -#define IRQ_UCB1200 29 /* Interrupt generated by UCB1200*/ -#define IRQ_BAT_LO 30 /* Low batery or external power */ -#define IRQ_MEDIA_CHG 31 /* Media change interrupt */ - -/* - * This is the offset of the FIQ "IRQ" numbers - */ -#define FIQ_START 64 diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h deleted file mode 100644 index 402df637e74..00000000000 --- a/include/asm-arm/arch-l7200/memory.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/memory.h - * - * Copyright (c) 2000 Steve Hill (sjhill@cotw.com) - * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net) - * - * Changelog: - * 03-13-2000 SJH Created - * 04-13-2000 RS Changed bus macros for new addr - * 05-03-2000 SJH Removed bus macros and fixed virt_to_phys macro - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset on the L7200 SDB. - */ -#define PHYS_OFFSET UL(0xf0000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - ROM - */ -#define FLUSH_BASE_PHYS 0x40000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h deleted file mode 100644 index 730056c194b..00000000000 --- a/include/asm-arm/arch-l7200/pmpcon.h +++ /dev/null @@ -1,46 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/pmpcon.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * DC/DC converter register. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define PMPCON_OFF 0x00006000 /* Offset from IO_START_2. */ - -/* IO_START_2 and IO_BASE_2 are defined in hardware.h */ - -#define PMPCON_START (IO_START_2 + PMPCON_OFF) /* Physical address of reg. */ -#define PMPCON_BASE (IO_BASE_2 + PMPCON_OFF) /* Virtual address of reg. */ - - -#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE)) - -#define PWM2_50CYCLE 0x800 -#define CONTRAST 0x9 - -#define PWM1H (CONTRAST) -#define PWM1L (CONTRAST << 4) - -#define PMPCON_VALUE (PWM2_50CYCLE | PWM1L | PWM1H) - -/* PMPCON = 0x811; // too light and fuzzy - * PMPCON = 0x844; - * PMPCON = 0x866; // better color poor depth - * PMPCON = 0x888; // Darker but better depth - * PMPCON = 0x899; // Darker even better depth - * PMPCON = 0x8aa; // too dark even better depth - * PMPCON = 0X8cc; // Way too dark - */ - -/* As CONTRAST value increases the greater the depth perception and - * the darker the colors. - */ diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h deleted file mode 100644 index 57faea76d1b..00000000000 --- a/include/asm-arm/arch-l7200/pmu.h +++ /dev/null @@ -1,125 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/pmu.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * Power Management Unit (PMU). - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */ -#define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */ - - -/* Define the PMU registers for use by device drivers and the kernel. */ - -typedef struct { - unsigned int CURRENT; /* Current configuration register */ - unsigned int NEXT; /* Next configuration register */ - unsigned int reserved; - unsigned int RUN; /* Run configuration register */ - unsigned int COMM; /* Configuration command register */ - unsigned int SDRAM; /* SDRAM configuration bypass register */ -} pmu_interface; - -#define PMU ((volatile pmu_interface *)(PMU_BASE)) - - -/* Macro's for reading the common register fields. */ - -#define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */ -#define GET_OSCEN(reg) ((reg >> 16) & 0x01) -#define GET_OSCMUX(reg) ((reg >> 15) & 0x01) -#define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */ -#define GET_PLLEN(reg) ((reg >> 8) & 0x01) -#define GET_PLLMUX(reg) ((reg >> 7) & 0x01) -#define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */ -#define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01) -#define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01) -#define GET_FASTBUS(reg) (reg & 0x1) - -/* CFG_NEXT register */ - -#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */ -#define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01) -#define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01) -#define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01) - -/* Useful field values that can be used to construct the - * CFG_NEXT and CFG_RUN registers. - */ - -#define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */ -#define NOCHANGE_STALL 1<<25 -#define CHANGE_NOSTALL 2<<25 -#define CHANGE_STALL 3<<25 - -#define INTRET 1<<17 -#define OSCEN 1<<16 -#define OSCMUX 1<<15 - -/* PLL frequencies */ - -#define PLLMUL_0 0<<9 /* 3.6864 MHz */ -#define PLLMUL_1 1<<9 /* ?????? MHz */ -#define PLLMUL_5 5<<9 /* 18.432 MHz */ -#define PLLMUL_10 10<<9 /* 36.864 MHz */ -#define PLLMUL_18 18<<9 /* ?????? MHz */ -#define PLLMUL_20 20<<9 /* 73.728 MHz */ -#define PLLMUL_32 32<<9 /* ?????? MHz */ -#define PLLMUL_35 35<<9 /* 129.024 MHz */ -#define PLLMUL_36 36<<9 /* ?????? MHz */ -#define PLLMUL_39 39<<9 /* ?????? MHz */ -#define PLLMUL_40 40<<9 /* 147.456 MHz */ - -/* Clock recovery times */ - -#define CRCLOCK_1 1<<18 -#define CRCLOCK_2 2<<18 -#define CRCLOCK_4 4<<18 -#define CRCLOCK_8 8<<18 -#define CRCLOCK_16 16<<18 -#define CRCLOCK_32 32<<18 -#define CRCLOCK_63 63<<18 -#define CRCLOCK_127 127<<18 - -#define PLLEN 1<<8 -#define PLLMUX 1<<7 -#define SDR_STOP 1<<6 -#define SYSCLKEN 1<<5 - -#define BCLK_DIV_4 2<<3 -#define BCLK_DIV_2 1<<3 -#define BCLK_DIV_1 0<<3 - -#define SDRB_SEL 1<<2 -#define SDRF_SEL 1<<1 -#define FASTBUS 1<<0 - - -/* CFG_SDRAM */ - -#define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */ -#define SDRREFACK 1<<1 /* Read-only */ -#define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */ -#define SDRSTOPACK 1<<3 /* Read-only */ -#define PICEN 1<<4 /* Enable Co-procesor */ -#define PICTEST 1<<5 - -#define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01) -#define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */ -#define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01) -#define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */ -#define GET_PICEN ((PMU->SDRAM >> 4) & 0x01) -#define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01) diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h deleted file mode 100644 index defb8b7fca7..00000000000 --- a/include/asm-arm/arch-l7200/serial.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/serial.h - * - * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 03-20-2000 SJH Created - * 03-26-2000 SJH Added flags for serial ports - * 03-27-2000 SJH Corrected BASE_BAUD value - * 04-14-2000 RS Made register addr dependent on IO_BASE - * 05-03-2000 SJH Complete rewrite - * 05-09-2000 SJH Stripped out architecture specific serial stuff - * and placed it in a separate file - * 07-28-2000 SJH Moved base baud rate variable - */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -/* - * This assumes you have a 3.6864 MHz clock for your UART. - */ -#define BASE_BAUD 3686400 - -/* - * Standard COM flags - */ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#define STD_SERIAL_PORT_DEFNS \ - /* MAGIC UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS }, /* ttyLU0 */ \ - { 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS }, /* ttyLU1 */ \ - -#define EXTRA_SERIAL_PORT_DEFNS - -#endif diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h deleted file mode 100644 index b1008a9d23e..00000000000 --- a/include/asm-arm/arch-l7200/serial_l7200.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/serial_l7200.h - * - * Copyright (c) 2000 Steven Hill (sjhill@cotw.com) - * - * Changelog: - * 05-09-2000 SJH Created - */ -#ifndef __ASM_ARCH_SERIAL_L7200_H -#define __ASM_ARCH_SERIAL_L7200_H - -#include - -/* - * This assumes you have a 3.6864 MHz clock for your UART. - */ -#define BASE_BAUD 3686400 - -/* - * UART base register addresses - */ -#define UART1_BASE (IO_BASE + 0x00044000) -#define UART2_BASE (IO_BASE + 0x00045000) - -/* - * UART register offsets - */ -#define UARTDR 0x00 /* Tx/Rx data */ -#define RXSTAT 0x04 /* Rx status */ -#define H_UBRLCR 0x08 /* mode register high */ -#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/ -#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/ -#define UARTCON 0x14 /* control register */ -#define UARTFLG 0x18 /* flag register */ -#define UARTINTSTAT 0x1C /* FIFO IRQ status register */ -#define UARTINTMASK 0x20 /* FIFO IRQ mask register */ - -/* - * UART baud rate register values - */ -#define BR_110 0x827 -#define BR_1200 0x06e -#define BR_2400 0x05f -#define BR_4800 0x02f -#define BR_9600 0x017 -#define BR_14400 0x00f -#define BR_19200 0x00b -#define BR_38400 0x005 -#define BR_57600 0x003 -#define BR_76800 0x002 -#define BR_115200 0x001 - -/* - * Receiver status register (RXSTAT) mask values - */ -#define RXSTAT_NO_ERR 0x00 /* No error */ -#define RXSTAT_FRM_ERR 0x01 /* Framing error */ -#define RXSTAT_PAR_ERR 0x02 /* Parity error */ -#define RXSTAT_OVR_ERR 0x04 /* Overrun error */ - -/* - * High byte of UART bit rate and line control register (H_UBRLCR) values - */ -#define UBRLCR_BRK 0x01 /* generate break on tx */ -#define UBRLCR_PEN 0x02 /* enable parity */ -#define UBRLCR_PDIS 0x00 /* disable parity */ -#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */ -#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */ -#define UBRLCR_FIFO 0x10 /* enable FIFO */ -#define UBRLCR_LEN5 0x60 /* word length5 */ -#define UBRLCR_LEN6 0x40 /* word length6 */ -#define UBRLCR_LEN7 0x20 /* word length7 */ -#define UBRLCR_LEN8 0x00 /* word length8 */ - -/* - * UART control register (UARTCON) values - */ -#define UARTCON_UARTEN 0x01 /* Enable UART */ -#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */ - -/* - * UART flag register (UARTFLG) mask values - */ -#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */ -#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */ -#define UARTFLG_UBUSY 0x08 /* Transmitter busy */ -#define UARTFLG_DCD 0x04 /* Data carrier detect */ -#define UARTFLG_DSR 0x02 /* Data set ready */ -#define UARTFLG_CTS 0x01 /* Clear to send */ - -/* - * UART interrupt status/clear registers (UARTINTSTAT/CLR) values - */ -#define UART_TXINT 0x01 /* TX interrupt */ -#define UART_RXINT 0x02 /* RX interrupt */ -#define UART_RXERRINT 0x04 /* RX error interrupt */ -#define UART_MSINT 0x08 /* Modem Status interrupt */ -#define UART_UDINT 0x10 /* UART Disabled interrupt */ -#define UART_ALLIRQS 0x1f /* All interrupts */ - -#endif diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h deleted file mode 100644 index bf4364ee253..00000000000 --- a/include/asm-arm/arch-l7200/sib.h +++ /dev/null @@ -1,119 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/sib.h - * - * Registers and helper functions for the Serial Interface Bus. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */ -#define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */ - -/* Offsets from the start of the SIB for all the registers. */ - -/* Define the SIB registers for use by device drivers and the kernel. */ - -typedef struct -{ - unsigned int MCCR; /* SIB Control Register Offset: 0x00 */ - unsigned int RES1; /* Reserved Offset: 0x04 */ - unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */ - unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */ - unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */ - unsigned int RES2; /* Reserved Offset: 0x14 */ - unsigned int MCSR; /* SIB Status Register Offset: 0x18 */ -} SIB_Interface; - -#define SIB ((volatile SIB_Interface *) (SIB_BASE)) - -/* MCCR */ - -#define INTERNAL_FREQ 9216000 /* Hertz */ -#define AUDIO_FREQ 5000 /* Hertz */ -#define TELECOM_FREQ 5000 /* Hertz */ - -#define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ)) -#define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ)) - -#define MCCR_ASD57 AUDIO_DIVIDE -#define MCCR_TSD57 (TELECOM_DIVIDE << 8) -#define MCCR_MCE (1 << 16) /* SIB enable */ -#define MCCR_ECS (1 << 17) /* External Clock Select */ -#define MCCR_ADM (1 << 18) /* A/D Data Sampling */ -#define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */ - - -#define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */ -#define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */ -#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */ -#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */ -#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */ -#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ -#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */ -#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ -#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */ -#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */ -#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */ -#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */ -#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */ -#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */ - -/* MCDR0 */ - -#define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff) -#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4)) - -/* MCDR1 */ - -#define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff) -#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2)) - - -/* MCSR */ - -#define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */ -#define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */ -#define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */ -#define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */ - -#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO) - - -#define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/ -#define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/ -#define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */ -#define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */ -#define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */ -#define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */ -#define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */ -#define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */ -#define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */ -#define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */ -#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */ -#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */ -#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */ -#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */ -#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */ -#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */ - -/* MCDR2 */ - -#define MCDR2_rW (1 << 16) - -#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff))) -#define MCDR2_WRITE_COMPLETE GET_CWC - -#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17)) -#define MCDR2_READ_COMPLETE GET_CRC -#define MCDR2_READ (SIB->MCDR2 & 0xffff) diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h deleted file mode 100644 index 771c774f481..00000000000 --- a/include/asm-arm/arch-l7200/sys-clock.h +++ /dev/null @@ -1,67 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/sys-clock.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * System clocks. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define SYS_CLOCK_OFF 0x00050030 /* Offset from IO_START. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */ -#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ - -/* Define the interface to the SYS_CLOCK */ - -typedef struct -{ - unsigned int ENABLE; - unsigned int ESYNC; - unsigned int SELECT; -} sys_clock_interface; - -#define SYS_CLOCK ((volatile sys_clock_interface *)(SYS_CLOCK_BASE)) - -//#define CLOCK_EN (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF)) -//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF)) -//#define CLOCK_SEL (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF)) - -/* SYS_CLOCK -> ENABLE */ - -#define SYN_EN 1<<0 -#define B18M_EN 1<<1 -#define CLK3M6_EN 1<<2 -#define BUART_EN 1<<3 -#define CLK18MU_EN 1<<4 -#define FIR_EN 1<<5 -#define MIRN_EN 1<<6 -#define UARTM_EN 1<<7 -#define SIBADC_EN 1<<8 -#define ALTD_EN 1<<9 -#define CLCLK_EN 1<<10 - -/* SYS_CLOCK -> SELECT */ - -#define CLK18M_DIV 1<<0 -#define MIR_SEL 1<<1 -#define SSP_SEL 1<<4 -#define MM_DIV 1<<5 -#define MM_SEL 1<<6 -#define ADC_SEL_2 0<<7 -#define ADC_SEL_4 1<<7 -#define ADC_SEL_8 3<<7 -#define ADC_SEL_16 7<<7 -#define ADC_SEL_32 0x0f<<7 -#define ADC_SEL_64 0x1f<<7 -#define ADC_SEL_128 0x3f<<7 -#define ALTD_SEL 1<<13 diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h deleted file mode 100644 index efef950a5b5..00000000000 --- a/include/asm-arm/arch-l7200/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/system.h - * - * Copyright (c) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog - * 03-21-2000 SJH Created - * 04-26-2000 SJH Fixed functions - * 05-03-2000 SJH Removed usage of obsolete 'iomd.h' - * 05-31-2000 SJH Properly implemented 'arch_idle' - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include - -static inline void arch_idle(void) -{ - *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */ -} - -static inline void arch_reset(char mode) -{ - if (mode == 's') { - cpu_reset(0); - } -} - -#endif diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h deleted file mode 100644 index ea22f7fff9c..00000000000 --- a/include/asm-arm/arch-l7200/time.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/time.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 01-02-2000 RS Created l7200 version, derived from rpc code - * 05-03-2000 SJH Complete rewrite - */ -#ifndef _ASM_ARCH_TIME_H -#define _ASM_ARCH_TIME_H - -#include - -/* - * RTC base register address - */ -#define RTC_BASE (IO_BASE_2 + 0x2000) - -/* - * RTC registers - */ -#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000)) -#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004)) -#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008)) -#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008)) -#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c)) -#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010)) - -/* - * RTCCR register values - */ -#define RTC_RATE_32 0x00 /* 32 Hz tick */ -#define RTC_RATE_64 0x10 /* 64 Hz tick */ -#define RTC_RATE_128 0x20 /* 128 Hz tick */ -#define RTC_RATE_256 0x30 /* 256 Hz tick */ -#define RTC_EN_ALARM 0x01 /* Enable alarm */ -#define RTC_EN_TIC 0x04 /* Enable counter */ -#define RTC_EN_STWDOG 0x08 /* Enable watchdog */ - -/* - * Handler for RTC timer interrupt - */ -static irqreturn_t -timer_interrupt(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - do_profile(regs); - RTC_RTCC = 0; /* Clear interrupt */ - - return IRQ_HANDLED; -} - -/* - * Set up RTC timer interrupt, and return the current time in seconds. - */ -void __init time_init(void) -{ - RTC_RTCC = 0; /* Clear interrupt */ - - timer_irq.handler = timer_interrupt; - - setup_irq(IRQ_RTC_TICK, &timer_irq); - - RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */ -} - -#endif diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h deleted file mode 100644 index 3c3202620f0..00000000000 --- a/include/asm-arm/arch-l7200/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/timex.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * 04-21-2000 RS Created file - * 05-03-2000 SJH Tick rate was wrong - * - */ - -/* - * On the ARM720T, clock ticks are set to 128 Hz. - * - * NOTE: The actual RTC value is set in 'time.h' which - * must be changed when choosing a different tick - * rate. The value of HZ in 'param.h' must also - * be changed to match below. - */ -#define CLOCK_TICK_RATE 128 diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h deleted file mode 100644 index c5ba0adf4a5..00000000000 --- a/include/asm-arm/arch-l7200/uncompress.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/uncompress.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 05-01-2000 SJH Created - * 05-13-2000 SJH Filled in function bodies - * 07-26-2000 SJH Removed hard coded baud rate - */ - -#include - -#define IO_UART IO_START + 0x00044000 - -#define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v)) -#define __raw_readb(p) (*(volatile unsigned char *)(p)) - -static inline void putc(int c) -{ - while(__raw_readb(IO_UART + 0x18) & 0x20 || - __raw_readb(IO_UART + 0x18) & 0x08) - barrier(); - - __raw_writeb(c, IO_UART + 0x00); -} - -static inline void flush(void) -{ -} - -static __inline__ void arch_decomp_setup(void) -{ - __raw_writeb(0x00, IO_UART + 0x08); /* Set HSB */ - __raw_writeb(0x00, IO_UART + 0x20); /* Disable IRQs */ - __raw_writeb(0x01, IO_UART + 0x14); /* Enable UART */ -} - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h deleted file mode 100644 index 816231eedaa..00000000000 --- a/include/asm-arm/arch-l7200/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/vmalloc.h - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h deleted file mode 100644 index 7d0ba18ad57..00000000000 --- a/include/asm-arm/arch-lh7a40x/clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/clocks.h - * - * Copyright (C) 2004 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CLOCKS_H -#define __ASM_ARCH_CLOCKS_H - -unsigned int fclkfreq_get (void); -unsigned int hclkfreq_get (void); -unsigned int pclkfreq_get (void); - -#endif /* _ASM_ARCH_CLOCKS_H */ diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h deleted file mode 100644 index 51de96e87fa..00000000000 --- a/include/asm-arm/arch-lh7a40x/constants.h +++ /dev/null @@ -1,91 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/constants.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CONSTANTS_H -#define __ASM_ARCH_CONSTANTS_H - - -/* Addressing constants */ - - /* SoC CPU IO addressing */ -#define IO_PHYS (0x80000000) -#define IO_VIRT (0xf8000000) -#define IO_SIZE (0x0000B000) - -#ifdef CONFIG_MACH_KEV7A400 -# define CPLD_PHYS (0x20000000) -# define CPLD_VIRT (0xf2000000) -# define CPLD_SIZE PAGE_SIZE -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) - -# define IOBARRIER_PHYS 0x10000000 /* Second bank, fastest timing */ -# define IOBARRIER_VIRT 0xf0000000 -# define IOBARRIER_SIZE PAGE_SIZE - -# define CF_PHYS 0x60200000 -# define CF_VIRT 0xf6020000 -# define CF_SIZE (8*1024) - - /* The IO mappings for the LPD CPLD are, unfortunately, sparse. */ -# define CPLDX_PHYS(x) (0x70000000 | ((x) << 20)) -# define CPLDX_VIRT(x) (0xf7000000 | ((x) << 16)) -# define CPLD00_PHYS CPLDX_PHYS (0x00) /* Wired LAN */ -# define CPLD00_VIRT CPLDX_VIRT (0x00) -# define CPLD00_SIZE PAGE_SIZE -# define CPLD02_PHYS CPLDX_PHYS (0x02) -# define CPLD02_VIRT CPLDX_VIRT (0x02) -# define CPLD02_SIZE PAGE_SIZE -# define CPLD06_PHYS CPLDX_PHYS (0x06) -# define CPLD06_VIRT CPLDX_VIRT (0x06) -# define CPLD06_SIZE PAGE_SIZE -# define CPLD08_PHYS CPLDX_PHYS (0x08) -# define CPLD08_VIRT CPLDX_VIRT (0x08) -# define CPLD08_SIZE PAGE_SIZE -# define CPLD0A_PHYS CPLDX_PHYS (0x0a) -# define CPLD0A_VIRT CPLDX_VIRT (0x0a) -# define CPLD0A_SIZE PAGE_SIZE -# define CPLD0C_PHYS CPLDX_PHYS (0x0c) -# define CPLD0C_VIRT CPLDX_VIRT (0x0c) -# define CPLD0C_SIZE PAGE_SIZE -# define CPLD0E_PHYS CPLDX_PHYS (0x0e) -# define CPLD0E_VIRT CPLDX_VIRT (0x0e) -# define CPLD0E_SIZE PAGE_SIZE -# define CPLD10_PHYS CPLDX_PHYS (0x10) -# define CPLD10_VIRT CPLDX_VIRT (0x10) -# define CPLD10_SIZE PAGE_SIZE -# define CPLD12_PHYS CPLDX_PHYS (0x12) -# define CPLD12_VIRT CPLDX_VIRT (0x12) -# define CPLD12_SIZE PAGE_SIZE -# define CPLD14_PHYS CPLDX_PHYS (0x14) -# define CPLD14_VIRT CPLDX_VIRT (0x14) -# define CPLD14_SIZE PAGE_SIZE -# define CPLD16_PHYS CPLDX_PHYS (0x16) -# define CPLD16_VIRT CPLDX_VIRT (0x16) -# define CPLD16_SIZE PAGE_SIZE -# define CPLD18_PHYS CPLDX_PHYS (0x18) -# define CPLD18_VIRT CPLDX_VIRT (0x18) -# define CPLD18_SIZE PAGE_SIZE -# define CPLD1A_PHYS CPLDX_PHYS (0x1a) -# define CPLD1A_VIRT CPLDX_VIRT (0x1a) -# define CPLD1A_SIZE PAGE_SIZE -#endif - - /* Timing constants */ - -#define XTAL_IN 14745600 /* 14.7456 MHz crystal */ -#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */ -#define MAX_HCLK_KHZ 100000 /* HCLK max limit ~100MHz */ -#define HCLK (99993600) -//#define HCLK (119808000) - -#endif /* __ASM_ARCH_CONSTANTS_H */ diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/include/asm-arm/arch-lh7a40x/debug-macro.S deleted file mode 100644 index 421dcd6a850..00000000000 --- a/include/asm-arm/arch-lh7a40x/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - @ It is not known if this will be appropriate for every 40x - @ board. - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00000700 @ offset from base - orreq \rx, \rx, #0x80000000 @ physical base - orrne \rx, \rx, #0xf8000000 @ virtual base - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] @ DATA - .endm - - .macro busyuart,rd,rx @ spin while busy -1001: ldr \rd, [\rx, #0x10] @ STATUS - tst \rd, #1 << 3 @ BUSY (TX FIFO not empty) - bne 1001b @ yes, spin - .endm - - .macro waituart,rd,rx @ wait for Tx FIFO room -1001: ldrb \rd, [\rx, #0x10] @ STATUS - tst \rd, #1 << 5 @ TXFF (TX FIFO full) - bne 1001b @ yes, spin - .endm diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h deleted file mode 100644 index a8cbd14bbf9..00000000000 --- a/include/asm-arm/arch-lh7a40x/dma.h +++ /dev/null @@ -1,86 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/dma.h - * - * Copyright (C) 2005 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -typedef enum { - DMA_M2M0 = 0, - DMA_M2M1 = 1, - DMA_M2P0 = 2, /* Tx */ - DMA_M2P1 = 3, /* Rx */ - DMA_M2P2 = 4, /* Tx */ - DMA_M2P3 = 5, /* Rx */ - DMA_M2P4 = 6, /* Tx - AC97 */ - DMA_M2P5 = 7, /* Rx - AC97 */ - DMA_M2P6 = 8, /* Tx */ - DMA_M2P7 = 9, /* Rx */ -} dma_device_t; - -#define DMA_LENGTH_MAX ((64*1024) - 4) /* bytes */ - -#define DMAC_GCA __REG(DMAC_PHYS + 0x2b80) -#define DMAC_GIR __REG(DMAC_PHYS + 0x2bc0) - -#define DMAC_GIR_MMI1 (1<<11) -#define DMAC_GIR_MMI0 (1<<10) -#define DMAC_GIR_MPI8 (1<<9) -#define DMAC_GIR_MPI9 (1<<8) -#define DMAC_GIR_MPI6 (1<<7) -#define DMAC_GIR_MPI7 (1<<6) -#define DMAC_GIR_MPI4 (1<<5) -#define DMAC_GIR_MPI5 (1<<4) -#define DMAC_GIR_MPI2 (1<<3) -#define DMAC_GIR_MPI3 (1<<2) -#define DMAC_GIR_MPI0 (1<<1) -#define DMAC_GIR_MPI1 (1<<0) - -#define DMAC_M2P0 0x0000 -#define DMAC_M2P1 0x0040 -#define DMAC_M2P2 0x0080 -#define DMAC_M2P3 0x00c0 -#define DMAC_M2P4 0x0240 -#define DMAC_M2P5 0x0200 -#define DMAC_M2P6 0x02c0 -#define DMAC_M2P7 0x0280 -#define DMAC_M2P8 0x0340 -#define DMAC_M2P9 0x0300 -#define DMAC_M2M0 0x0100 -#define DMAC_M2M1 0x0140 - -#define DMAC_P_PCONTROL(c) __REG(DMAC_PHYS + (c) + 0x00) -#define DMAC_P_PINTERRUPT(c) __REG(DMAC_PHYS + (c) + 0x04) -#define DMAC_P_PPALLOC(c) __REG(DMAC_PHYS + (c) + 0x08) -#define DMAC_P_PSTATUS(c) __REG(DMAC_PHYS + (c) + 0x0c) -#define DMAC_P_REMAIN(c) __REG(DMAC_PHYS + (c) + 0x14) -#define DMAC_P_MAXCNT0(c) __REG(DMAC_PHYS + (c) + 0x20) -#define DMAC_P_BASE0(c) __REG(DMAC_PHYS + (c) + 0x24) -#define DMAC_P_CURRENT0(c) __REG(DMAC_PHYS + (c) + 0x28) -#define DMAC_P_MAXCNT1(c) __REG(DMAC_PHYS + (c) + 0x30) -#define DMAC_P_BASE1(c) __REG(DMAC_PHYS + (c) + 0x34) -#define DMAC_P_CURRENT1(c) __REG(DMAC_PHYS + (c) + 0x38) - -#define DMAC_PCONTROL_ENABLE (1<<4) - -#define DMAC_PORT_USB 0 -#define DMAC_PORT_SDMMC 1 -#define DMAC_PORT_AC97_1 2 -#define DMAC_PORT_AC97_2 3 -#define DMAC_PORT_AC97_3 4 -#define DMAC_PORT_UART1 6 -#define DMAC_PORT_UART2 7 -#define DMAC_PORT_UART3 8 - -#define DMAC_PSTATUS_CURRSTATE_SHIFT 4 -#define DMAC_PSTATUS_CURRSTATE_MASK 0x3 - -#define DMAC_PSTATUS_NEXTBUF (1<<6) -#define DMAC_PSTATUS_STALLRINT (1<<0) - -#define DMAC_INT_CHE (1<<3) -#define DMAC_INT_NFB (1<<1) -#define DMAC_INT_STALL (1<<0) diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S deleted file mode 100644 index 34468e06462..00000000000 --- a/include/asm-arm/arch-lh7a40x/entry-macro.S +++ /dev/null @@ -1,149 +0,0 @@ -/* - * include/asm-arm/arch-lh7a40x/entry-macro.S - * - * Low-level IRQ helper macros for LH7A40x platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - -/* In order to allow there to be support for both of the processor - classes at the same time, we make a hack here that isn't very - pretty. At startup, the link pointed to with the - branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is - detected as a lh7a404. - - *** FIXME: we should clean this up so that there is only one - implementation for each CPU's design. - -*/ - -#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - -branch_irq_lh7a400: b 1000f - -@ Implementation of the LH7A404 get_irqnr_and_base. - - mov \irqnr, #0 @ VIC1 irq base - mov \base, #io_p2v(0x80000000) @ APB registers - add \base, \base, #0x8000 - ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 - ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS - bne 1001f - add \base, \base, #(0xa000 - 0x8000) - ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS - mov \irqnr, #32 @ VIC2 irq base - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits -1008: movs \irqstat, #1 @ Force !Z - str \tmp, [\base, #0x0030] @ Clear vector - b 1009f - -@ Implementation of the LH7A400 get_irqnr_and_base. - -1000: mov \irqnr, #0 - mov \base, #io_p2v(0x80000000) @ APB registers - ldr \irqstat, [\base, #0x500] @ PIC INTSR - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1008: movs \irqstat, #1 @ Force !Z - -1009: - .endm - - - -#elif defined (CONFIG_ARCH_LH7A400) - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 - mov \base, #io_p2v(0x80000000) @ APB registers - ldr \irqstat, [\base, #0x500] @ PIC INTSR - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1008: movs \irqstat, #1 @ Force !Z -1009: - .endm - -#elif defined(CONFIG_ARCH_LH7A404) - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 @ VIC1 irq base - mov \base, #io_p2v(0x80000000) @ APB registers - add \base, \base, #0x8000 - ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 - ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS - bne 1001f - add \base, \base, #(0xa000 - 0x8000) - ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS - mov \irqnr, #32 @ VIC2 irq base - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits -1008: movs \irqstat, #1 @ Force !Z - str \tmp, [\base, #0x0030] @ Clear vector -1009: - .endm -#endif - - diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h deleted file mode 100644 index e9ff74fd793..00000000000 --- a/include/asm-arm/arch-lh7a40x/hardware.h +++ /dev/null @@ -1,62 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/hardware.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ] - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include /* Added for the sake of amba-clcd driver */ - -#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff)) -#define io_v2p(x) ( (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff)) - -#ifdef __ASSEMBLY__ - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#else - -# if 0 -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -# else -/* - * This __REG() version gives the same results as the one above, except - * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc - * doesn't guess this by itself. - */ -#include -typedef struct { volatile u32 offset[4096]; } __regbase; -# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] -# define __REG(x) __REGP(io_p2v(x)) -typedef struct { volatile u16 offset[4096]; } __regbase16; -# define __REGP16(x) ((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1] -# define __REG16(x) __REGP16(io_p2v(x)) -typedef struct { volatile u8 offset[4096]; } __regbase8; -# define __REGP8(x) ((__regbase8 *)((x)&~4095))->offset[(x)&4095] -# define __REG8(x) __REGP8(io_p2v(x)) -#endif - -/* Let's kick gcc's ass again... */ -# define __REG2(x,y) \ - ( __builtin_constant_p(y) ? (__REG((x) + (y))) \ - : (*(volatile u32 *)((u32)&__REG(x) + (y))) ) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#endif - -#define MASK_AND_SET(v,m,s) (v) = ((v)&~(m))|(s) - -#include "registers.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h deleted file mode 100644 index 8d591d0927c..00000000000 --- a/include/asm-arm/arch-lh7a40x/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/io.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* No ISA or PCI bus on this machine. */ -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif /* __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h deleted file mode 100644 index afe8c7cbad6..00000000000 --- a/include/asm-arm/arch-lh7a40x/irqs.h +++ /dev/null @@ -1,200 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/irqs.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -/* It is to be seen whether or not we can build a kernel for more than - * one board. For the time being, these macros assume that we cannot. - * Thus, it is OK to ifdef machine/board specific IRQ assignments. - */ - - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define FIQ_START 80 - -#if defined (CONFIG_ARCH_LH7A400) - - /* FIQs */ - -# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */ -# define IRQ_BLINT 1 /* Battery Low */ -# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */ -# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */ - - /* IRQs */ - -# define IRQ_CSINT 4 /* Audio Codec (ACI) */ -# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */ -# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */ -# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */ -# define IRQ_T1UI 8 /* Timer 1 underflow */ -# define IRQ_T2UI 9 /* Timer 2 underflow */ -# define IRQ_RTCMI 10 -# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */ -# define IRQ_UART1INTR 12 -# define IRQ_UART2INTR 13 -# define IRQ_LCDINTR 14 -# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */ -# define IRQ_UART3INTR 16 -# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */ -# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */ -# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */ -# define IRQ_USBINTR 20 -# define IRQ_DMAINTR 21 -# define IRQ_T3UI 22 /* Timer 3 underflow */ -# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */ -# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */ -# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */ -# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */ -# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */ - -# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */ - - /* Given IRQ, return GPIO interrupt number 0-7 */ -# define IRQ_TO_GPIO(i) ((i) \ - - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\ - - (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0)) - -#endif - -#if defined (CONFIG_ARCH_LH7A404) - -# define IRQ_BROWN 0 /* Brownout */ -# define IRQ_WDTINTR 1 /* Watchdog Timer */ -# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */ -# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */ -# define IRQ_T1UI 4 /* Timer 1 underflow */ -# define IRQ_T2UI 5 /* Timer 2 underflow */ -# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */ -# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */ -# define IRQ_DMAM2P1 8 -# define IRQ_DMAM2P2 9 -# define IRQ_DMAM2P3 10 -# define IRQ_DMAM2P4 11 -# define IRQ_DMAM2P5 12 -# define IRQ_DMAM2P6 13 -# define IRQ_DMAM2P7 14 -# define IRQ_DMAM2P8 15 -# define IRQ_DMAM2P9 16 -# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */ -# define IRQ_DMAM2M1 18 -# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */ -# define IRQ_GPIO1INTR 20 -# define IRQ_GPIO2INTR 21 -# define IRQ_GPIO3INTR 22 -# define IRQ_SOFT_V1_23 23 /* -- Unassigned */ -# define IRQ_SOFT_V1_24 24 -# define IRQ_SOFT_V1_25 25 -# define IRQ_SOFT_V1_26 26 -# define IRQ_SOFT_V1_27 27 -# define IRQ_SOFT_V1_28 28 -# define IRQ_SOFT_V1_29 29 -# define IRQ_SOFT_V1_30 30 -# define IRQ_SOFT_V1_31 31 - -# define IRQ_BLINT 32 /* Battery Low */ -# define IRQ_BMIINTR 33 /* Battery Monitor */ -# define IRQ_MCINTR 34 /* Media Change */ -# define IRQ_TINTR 35 /* 64Hz Tick */ -# define IRQ_WEINT 36 /* Watchdog Expired */ -# define IRQ_RTCMI 37 /* Real-time Clock Match */ -# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */ -# define IRQ_UART1ERR 39 /* UART1 Error */ -# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */ -# define IRQ_UART2ERR 41 /* UART2 Error */ -# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */ -# define IRQ_UART3ERR 43 /* UART3 Error */ -# define IRQ_SCIINTR 44 /* Smart Card */ -# define IRQ_TSCINTR 45 /* Touchscreen */ -# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */ -# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */ -# define IRQ_GPIO5INTR 48 -# define IRQ_GPIO6INTR 49 -# define IRQ_GPIO7INTR 50 -# define IRQ_T3UI 51 /* Timer 3 underflow */ -# define IRQ_LCDINTR 52 /* LCD Controller */ -# define IRQ_SSPINTR 53 /* Synchronous Serial Port */ -# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */ -# define IRQ_USBINTR 55 /* USB Device Port */ -# define IRQ_USHINTR 56 /* USB Host Port */ -# define IRQ_SOFT_V2_25 57 /* -- Unassigned */ -# define IRQ_SOFT_V2_26 58 -# define IRQ_SOFT_V2_27 59 -# define IRQ_SOFT_V2_28 60 -# define IRQ_SOFT_V2_29 61 -# define IRQ_SOFT_V2_30 62 -# define IRQ_SOFT_V2_31 63 - -# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */ - - /* Given IRQ, return GPIO interrupt number 0-7 */ -# define IRQ_TO_GPIO(i) ((i) \ - - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\ - - IRQ_GPIO0INTR) - - /* Vector Address constants */ -# define VA_VECTORED 0x100 /* Set for vectored interrupt */ -# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */ -# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */ - -#endif - - /* IRQ aliases */ - -#if !defined (IRQ_GPIO0INTR) -# define IRQ_GPIO0INTR IRQ_GPIO0FIQ -#endif -#define IRQ_TICK IRQ_TINTR -#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */ -#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */ -#define IRQ_USB IRQ_USBINTR /* USB device */ - -#ifdef CONFIG_MACH_KEV7A400 -# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */ -# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */ -# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */ -# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */ -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */ -# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */ -#endif - - /* System specific IRQs */ - -#define IRQ_BOARD_START NR_IRQ_CPU - -#ifdef CONFIG_MACH_KEV7A400 -# define IRQ_KEV7A400_CPLD IRQ_BOARD_START -# define NR_IRQ_BOARD 5 -# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */ -# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */ -# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */ -# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */ -# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4 -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START -# define NR_IRQ_BOARD 2 -# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */ -# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */ -#endif - -#if defined (CONFIG_MACH_LPD7A400) -# define IRQ_TOUCH IRQ_LPD7A400_TS -#endif - -#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD) - -#endif diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h deleted file mode 100644 index 9b0c8012e71..00000000000 --- a/include/asm-arm/arch-lh7a40x/memory.h +++ /dev/null @@ -1,76 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/memory.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * - * Refer to for more information. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xc0000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#ifdef CONFIG_DISCONTIGMEM - -/* - * Given a kernel address, find the home node of the underlying memory. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define KVADDR_TO_NID(addr) \ - ( ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) & 1)\ - | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1)) -# else /* 2 banks per node */ -# define KVADDR_TO_NID(addr) \ - (((unsigned long) (addr) - PAGE_OFFSET) >> 26) -# endif - -/* - * Given a page frame number, convert it to a node id. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define PFN_TO_NID(pfn) \ - (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) & 1)\ - | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1)) -# else /* 2 banks per node */ -# define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT)) -#endif - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT) -# else /* 2 banks per node */ -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT) -# endif - -#endif - -#endif diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h deleted file mode 100644 index b4f09b3e2d0..00000000000 --- a/include/asm-arm/arch-lh7a40x/registers.h +++ /dev/null @@ -1,224 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/registers.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#ifndef __ASM_ARCH_REGISTERS_H -#define __ASM_ARCH_REGISTERS_H - - - /* Physical register base addresses */ - -#define AC97C_PHYS (0x80000000) /* AC97 Controller */ -#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */ -#define USB_PHYS (0x80000200) /* USB Client */ -#define SCI_PHYS (0x80000300) /* Secure Card Interface */ -#define CSC_PHYS (0x80000400) /* Clock/State Controller */ -#define INTC_PHYS (0x80000500) /* Interrupt Controller */ -#define UART1_PHYS (0x80000600) /* UART1 Controller */ -#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */ -#define UART2_PHYS (0x80000700) /* UART2 Controller */ -#define UART3_PHYS (0x80000800) /* UART3 Controller */ -#define DCDC_PHYS (0x80000900) /* DC to DC Controller */ -#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */ -#define SSP_PHYS (0x80000b00) /* Synchronous ... */ -#define TIMER_PHYS (0x80000c00) /* Timer Controller */ -#define RTC_PHYS (0x80000d00) /* Real-time Clock */ -#define GPIO_PHYS (0x80000e00) /* General Purpose IO */ -#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */ -#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */ -#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */ -#define WDT_PHYS (0x80001400) /* Watchdog Timer */ -#define SMC_PHYS (0x80002000) /* Static Memory Controller */ -#define SDRC_PHYS (0x80002400) /* SDRAM Controller */ -#define DMAC_PHYS (0x80002800) /* DMA Controller */ -#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */ - - /* Physical registers of the LH7A404 */ - -#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */ -#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */ -#define USBH_PHYS (0x80009000) /* USB OHCI host controller */ -#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */ - -/*#define KBD_PHYS (0x80000e00) */ -/*#define LCDICP_PHYS (0x80001000) */ - - - /* Clock/State Controller register */ - -#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */ -#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */ -#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */ -#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */ - -#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */ -#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27) -#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26) -#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25) -#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24) -#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23) -#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22) -#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21) -#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20) -#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19) -#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18) -#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17) -#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16) - -#define CSC_PWRSR_CHIPMAN_SHIFT (24) -#define CSC_PWRSR_CHIPMAN_MASK (0xff) -#define CSC_PWRSR_CHIPID_SHIFT (16) -#define CSC_PWRSR_CHIPID_MASK (0xff) - -#define CSC_USBDRESET_APBRESETREG (1<<1) -#define CSC_USBDRESET_IORESETREG (1<<0) - - /* Interrupt Controller registers */ - -#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */ -#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */ -#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */ -#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */ - - - /* Vectored Interrupted Controller registers */ - -#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00) -#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04) -#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08) -#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c) -#define VIC1_INTEN __REG(VIC1_PHYS + 0x10) -#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14) -#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18) -#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c) -#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20) -#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30) -#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34) -#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100) -#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200) -#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00) -#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04) -#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08) -#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c) -#define VIC2_INTEN __REG(VIC2_PHYS + 0x10) -#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14) -#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18) -#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c) -#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20) -#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30) -#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34) -#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100) -#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200) - -#define VIC_CNTL_ENABLE (0x20) - - /* USB Host registers (Open HCI compatible) */ - -#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08) - - - /* GPIO registers */ - -#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */ -#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */ -#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */ -#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */ -#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */ -#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c) -#define GPIO_PADD __REG(GPIO_PHYS + 0x10) -#define GPIO_PAD __REG(GPIO_PHYS + 0x00) -#define GPIO_PCD __REG(GPIO_PHYS + 0x08) -#define GPIO_PCDD __REG(GPIO_PHYS + 0x18) -#define GPIO_PEDD __REG(GPIO_PHYS + 0x24) -#define GPIO_PED __REG(GPIO_PHYS + 0x20) - - - /* Static Memory Controller registers */ - -#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */ -#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */ -#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */ -#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */ -#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */ -#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */ - - -#ifdef CONFIG_MACH_KEV7A400 -# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */ -# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */ -# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */ -# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */ -# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */ -# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */ -# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08) -# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08) -# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a) -# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a) -# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c) -# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */ - -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) - -# define CPLD_CONTROL __REG16(CPLD02_PHYS) -# define CPLD_SPI_DATA __REG16(CPLD06_PHYS) -# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS) -# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS) -# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */ -# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS) -# define CPLD_FLASH __REG16(CPLD10_PHYS) -# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS) -# define CPLD_REVISION __REG16(CPLD14_PHYS) -# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS) -# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS) -# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS) - -#endif - - /* Timer registers */ - -#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */ -#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */ -#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */ -#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */ - -#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */ -#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */ -#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */ -#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */ - -#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */ - -#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */ -#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */ -#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */ -#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */ - -#define TIMER_C_ENABLE (1<<7) -#define TIMER_C_PERIODIC (1<<6) -#define TIMER_C_FREERUNNING (0) -#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */ -#define TIMER_C_508KHZ (0x08) - - /* GPIO registers */ - -#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */ -#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */ -#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */ -#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */ -#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */ -#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */ -#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */ - - -#endif /* _ASM_ARCH_REGISTERS_H */ diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/include/asm-arm/arch-lh7a40x/ssp.h deleted file mode 100644 index 132b1c4d5ce..00000000000 --- a/include/asm-arm/arch-lh7a40x/ssp.h +++ /dev/null @@ -1,71 +0,0 @@ -/* ssp.h - $Id$ - - written by Marc Singer - 6 Dec 2004 - - Copyright (C) 2004 Marc Singer - - ----------- - DESCRIPTION - ----------- - - This SSP header is available throughout the kernel, for this - machine/architecture, because drivers that use it may be dispersed. - - This file was cloned from the 7952x implementation. It would be - better to share them, but we're taking an easier approach for the - time being. - -*/ - -#if !defined (__SSP_H__) -# define __SSP_H__ - -/* ----- Includes */ - -/* ----- Types */ - -struct ssp_driver { - int (*init) (void); - void (*exit) (void); - void (*acquire) (void); - void (*release) (void); - int (*configure) (int device, int mode, int speed, - int frame_size_write, int frame_size_read); - void (*chip_select) (int enable); - void (*set_callbacks) (void* handle, - irqreturn_t (*callback_tx)(void*), - irqreturn_t (*callback_rx)(void*)); - void (*enable) (void); - void (*disable) (void); -// int (*save_state) (void*); -// void (*restore_state) (void*); - int (*read) (void); - int (*write) (u16 data); - int (*write_read) (u16 data); - void (*flush) (void); - void (*write_async) (void* pv, size_t cb); - size_t (*write_pos) (void); -}; - - /* These modes are only available on the LH79524 */ -#define SSP_MODE_SPI (1) -#define SSP_MODE_SSI (2) -#define SSP_MODE_MICROWIRE (3) -#define SSP_MODE_I2S (4) - - /* CPLD SPI devices */ -#define DEVICE_EEPROM 0 /* Configuration eeprom */ -#define DEVICE_MAC 1 /* MAC eeprom (LPD79524) */ -#define DEVICE_CODEC 2 /* Audio codec */ -#define DEVICE_TOUCH 3 /* Touch screen (LPD79520) */ - -/* ----- Globals */ - -/* ----- Prototypes */ - -//extern struct ssp_driver lh79520_i2s_driver; -extern struct ssp_driver lh7a400_cpld_ssp_driver; - -#endif /* __SSP_H__ */ diff --git a/include/asm-arm/arch-lh7a40x/system.h b/include/asm-arm/arch-lh7a40x/system.h deleted file mode 100644 index e1df8aa460f..00000000000 --- a/include/asm-arm/arch-lh7a40x/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/system.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -static inline void arch_idle(void) -{ - cpu_do_idle (); -} - -static inline void arch_reset(char mode) -{ - cpu_reset (0); -} diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/include/asm-arm/arch-lh7a40x/timex.h deleted file mode 100644 index fa726b67082..00000000000 --- a/include/asm-arm/arch-lh7a40x/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/timex.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#define CLOCK_TICK_RATE (PLL_CLOCK/6/16) - -/* -#define CLOCK_TICK_RATE 3686400 -*/ diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h deleted file mode 100644 index 3d1ce0426a3..00000000000 --- a/include/asm-arm/arch-lh7a40x/uncompress.h +++ /dev/null @@ -1,38 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/uncompress.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#ifndef UART_R_DATA -# define UART_R_DATA (0x00) -#endif -#ifndef UART_R_STATUS -# define UART_R_STATUS (0x10) -#endif -#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */ - - /* Access UART with physical addresses before MMU is setup */ -#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS)) -#define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA)) - -static inline void putc(int ch) -{ - while (UART_STATUS & nTxRdy) - barrier(); - UART_DATA = ch; -} - -static inline void flush(void) -{ -} - - /* NULL functions; we don't presently need them */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/include/asm-arm/arch-lh7a40x/vmalloc.h deleted file mode 100644 index 8163e45109b..00000000000 --- a/include/asm-arm/arch-lh7a40x/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/vmalloc.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ -#define VMALLOC_END (0xe8000000) diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S deleted file mode 100644 index 585502e9651..00000000000 --- a/include/asm-arm/arch-loki/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-loki/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =LOKI_REGS_PHYS_BASE - ldrne \rx, =LOKI_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h deleted file mode 100644 index 40a8c178f10..00000000000 --- a/include/asm-arm/arch-loki/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S deleted file mode 100644 index 693257cdbeb..00000000000 --- a/include/asm-arm/arch-loki/entry-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * include/asm-arm/arch-loki/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #IRQ_CAUSE_OFF] - ldr \tmp, [\base, #IRQ_MASK_OFF] - mov \irqnr, #0 - ands \irqstat, \irqstat, \tmp - clzne \irqnr, \irqstat - rsbne \irqnr, \irqnr, #31 - .endm diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h deleted file mode 100644 index f65b01c733b..00000000000 --- a/include/asm-arm/arch-loki/hardware.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * include/asm-arm/arch-loki/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "loki.h" - - -#endif diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h deleted file mode 100644 index e7418a915e7..00000000000 --- a/include/asm-arm/arch-loki/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-loki/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "loki.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE) - + LOKI_PCIE0_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h deleted file mode 100644 index 7e497143807..00000000000 --- a/include/asm-arm/arch-loki/irqs.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * include/asm-arm/arch-loki/irqs.h - * - * IRQ definitions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "loki.h" /* need GPIO_MAX */ - -/* - * Interrupt Controller - */ -#define IRQ_LOKI_PCIE_A_CPU_DRBL 0 -#define IRQ_LOKI_CPU_PCIE_A_DRBL 1 -#define IRQ_LOKI_PCIE_B_CPU_DRBL 2 -#define IRQ_LOKI_CPU_PCIE_B_DRBL 3 -#define IRQ_LOKI_COM_A_ERR 6 -#define IRQ_LOKI_COM_A_IN 7 -#define IRQ_LOKI_COM_A_OUT 8 -#define IRQ_LOKI_COM_B_ERR 9 -#define IRQ_LOKI_COM_B_IN 10 -#define IRQ_LOKI_COM_B_OUT 11 -#define IRQ_LOKI_DMA_A 12 -#define IRQ_LOKI_DMA_B 13 -#define IRQ_LOKI_SAS_A 14 -#define IRQ_LOKI_SAS_B 15 -#define IRQ_LOKI_DDR 16 -#define IRQ_LOKI_XOR 17 -#define IRQ_LOKI_BRIDGE 18 -#define IRQ_LOKI_PCIE_A_ERR 20 -#define IRQ_LOKI_PCIE_A_INT 21 -#define IRQ_LOKI_PCIE_B_ERR 22 -#define IRQ_LOKI_PCIE_B_INT 23 -#define IRQ_LOKI_GBE_A_INT 24 -#define IRQ_LOKI_GBE_B_INT 25 -#define IRQ_LOKI_DEV_ERR 26 -#define IRQ_LOKI_UART0 27 -#define IRQ_LOKI_UART1 28 -#define IRQ_LOKI_TWSI 29 -#define IRQ_LOKI_GPIO_23_0 30 -#define IRQ_LOKI_GPIO_25_24 31 - -/* - * Loki General Purpose Pins - */ -#define IRQ_LOKI_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h deleted file mode 100644 index 5dd05ee0a4e..00000000000 --- a/include/asm-arm/arch-loki/loki.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * include/asm-arm/arch-loki/loki.h - * - * Generic definitions for Marvell Loki (88RC8480) SoC flavors - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_LOKI_H -#define __ASM_ARCH_LOKI_H - -/* - * Marvell Loki (88RC8480) address maps. - * - * phys - * d0000000 on-chip peripheral registers - * e0000000 PCIe 0 Memory space - * e8000000 PCIe 1 Memory space - * f0000000 PCIe 0 I/O space - * f0100000 PCIe 1 I/O space - * - * virt phys size - * fed00000 d0000000 1M on-chip peripheral registers - * fee00000 f0000000 64K PCIe 0 I/O space - * fef00000 f0100000 64K PCIe 1 I/O space - */ - -#define LOKI_REGS_PHYS_BASE 0xd0000000 -#define LOKI_REGS_VIRT_BASE 0xfed00000 -#define LOKI_REGS_SIZE SZ_1M - -#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000 -#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000 -#define LOKI_PCIE0_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE0_IO_SIZE SZ_64K - -#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000 -#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000 -#define LOKI_PCIE1_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE1_IO_SIZE SZ_64K - -#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000 -#define LOKI_PCIE0_MEM_SIZE SZ_128M - -#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define LOKI_PCIE1_MEM_SIZE SZ_128M - -/* - * Register Map - */ -#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR 0x0004 -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) - -#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000) - -#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000) - -#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000) - -#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000) -#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000) - -#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000) -#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000) - -#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000) -#define DDR_REG(x) (DDR_VIRT_BASE | (x)) - - -#define GPIO_MAX 8 - - -#endif diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h deleted file mode 100644 index 835101e4987..00000000000 --- a/include/asm-arm/arch-loki/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-loki/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h deleted file mode 100644 index a3568ac8ec3..00000000000 --- a/include/asm-arm/arch-loki/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-loki/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h deleted file mode 100644 index 940014f97ca..00000000000 --- a/include/asm-arm/arch-loki/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-arm/arch-loki/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define LOKI_TCLK 180000000 diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h deleted file mode 100644 index 89a0cf88d3a..00000000000 --- a/include/asm-arm/arch-loki/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-loki/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h deleted file mode 100644 index f5be0622049..00000000000 --- a/include/asm-arm/arch-loki/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-loki/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000 diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h deleted file mode 100644 index 763051f8ba1..00000000000 --- a/include/asm-arm/arch-msm/board.h +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/include/asm-arm/arch-msm/board.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_BOARD_H -#define __ASM_ARCH_MSM_BOARD_H - -#include - -/* platform device data structures */ - -struct msm_mddi_platform_data -{ - void (*panel_power)(int on); - unsigned has_vsync_irq:1; -}; - -/* common init routines for use by arch/arm/mach-msm/board-*.c */ - -void __init msm_add_devices(void); -void __init msm_map_common_io(void); -void __init msm_init_irq(void); -void __init msm_init_gpio(void); - -#endif diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S deleted file mode 100644 index e131b44b210..00000000000 --- a/include/asm-arm/arch-msm/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* include/asm-arm/arch-msm7200/debug-macro.S - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include - - .macro addruart,rx - @ see if the MMU is enabled and select appropriate base address - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =MSM_UART1_PHYS - ldrne \rx, =MSM_UART1_BASE - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0C] - .endm - - .macro waituart,rd,rx - @ wait for TX_READY -1: ldr \rd, [\rx, #0x08] - tst \rd, #0x04 - beq 1b - .endm - - .macro busyuart,rd,rx - .endm diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h deleted file mode 100644 index e4b565b27b3..00000000000 --- a/include/asm-arm/arch-msm/dma.h +++ /dev/null @@ -1,151 +0,0 @@ -/* linux/include/asm-arm/arch-msm/dma.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_DMA_H - -#include -#include - -struct msm_dmov_cmd { - struct list_head list; - unsigned int cmdptr; - void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result); -/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */ -}; - -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd); -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); -/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */ - - - -#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) -#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) -#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) -#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) - -/* only security domain 3 is available to the ARM11 - * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM - */ - -#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch) -#define DMOV_CMD_LIST (0 << 29) /* does not work */ -#define DMOV_CMD_PTR_LIST (1 << 29) /* works */ -#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ -#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ -#define DMOV_CMD_ADDR(addr) ((addr) >> 3) - -#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch) -#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ -#define DMOV_RSLT_ERROR (1 << 3) -#define DMOV_RSLT_FLUSH (1 << 2) -#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ -#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ - -#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch) - -#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch) -#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) -#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) -#define DMOV_STATUS_RSLT_VALID (1 << 1) -#define DMOV_STATUS_CMD_PTR_RDY (1 << 0) - -#define DMOV_ISR DMOV_SD3(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch) -#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) -#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) -#define DMOV_CONFIG_IRQ_EN (1 << 0) - -/* channel assignments */ - -#define DMOV_NAND_CHAN 7 -#define DMOV_NAND_CRCI_CMD 5 -#define DMOV_NAND_CRCI_DATA 4 - -#define DMOV_SDC1_CHAN 8 -#define DMOV_SDC1_CRCI 6 - -#define DMOV_SDC2_CHAN 8 -#define DMOV_SDC2_CRCI 7 - -#define DMOV_TSIF_CHAN 10 -#define DMOV_TSIF_CRCI 10 - -#define DMOV_USB_CHAN 11 - -/* no client rate control ifc (eg, ram) */ -#define DMOV_NONE_CRCI 0 - - -/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover - * is going to walk a list of 32bit pointers as described below. Each - * pointer points to a *array* of dmov_s, etc structs. The last pointer - * in the list is marked with CMD_PTR_LP. The last struct in each array - * is marked with CMD_LC (see below). - */ -#define CMD_PTR_ADDR(addr) ((addr) >> 3) -#define CMD_PTR_LP (1 << 31) /* last pointer */ -#define CMD_PTR_PT (3 << 29) /* ? */ - -/* Single Item Mode */ -typedef struct { - unsigned cmd; - unsigned src; - unsigned dst; - unsigned len; -} dmov_s; - -/* Scatter/Gather Mode */ -typedef struct { - unsigned cmd; - unsigned src_dscr; - unsigned dst_dscr; - unsigned _reserved; -} dmov_sg; - -/* bits for the cmd field of the above structures */ - -#define CMD_LC (1 << 31) /* last command */ -#define CMD_FR (1 << 22) /* force result -- does not work? */ -#define CMD_OCU (1 << 21) /* other channel unblock */ -#define CMD_OCB (1 << 20) /* other channel block */ -#define CMD_TCB (1 << 19) /* ? */ -#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/ -#define CMD_SAH (1 << 17) /* source address hold -- does not work? */ - -#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */ -#define CMD_MODE_SG (1 << 0) /* untested */ -#define CMD_MODE_IND_SG (2 << 0) /* untested */ -#define CMD_MODE_BOX (3 << 0) /* untested */ - -#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */ -#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */ -#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */ - -#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */ -#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */ -#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */ - -#define CMD_DST_CRCI(n) (((n) & 15) << 7) -#define CMD_SRC_CRCI(n) (((n) & 15) << 3) - -#endif diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S deleted file mode 100644 index ee24aece4cb..00000000000 --- a/include/asm-arm/arch-msm/entry-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* include/asm-arm/arch-msm7200/entry-macro.S - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - mov \base, #MSM_VIC_BASE - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ 0xD0 has irq# or old irq# if the irq has been handled - @ 0xD4 has irq# or -1 if none pending *but* if you just - @ read 0xD4 you never get the first irq for some reason - ldr \irqnr, [\base, #0xD0] - ldr \irqnr, [\base, #0xD4] - cmp \irqnr, #0xffffffff - .endm diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h deleted file mode 100644 index 89af2b70182..00000000000 --- a/include/asm-arm/arch-msm/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/include/asm-arm/arch-msm/hardware.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_HARDWARE_H - -#endif diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h deleted file mode 100644 index 4645ae26b62..00000000000 --- a/include/asm-arm/arch-msm/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* include/asm-arm/arch-msm/io.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __arch_ioremap __msm_ioremap -#define __arch_iounmap __iounmap - -void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype); - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h deleted file mode 100644 index e62a108b185..00000000000 --- a/include/asm-arm/arch-msm/irqs.h +++ /dev/null @@ -1,90 +0,0 @@ -/* linux/include/asm-arm/arch-msm/irqs.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_IRQS_H -#define __ASM_ARCH_MSM_IRQS_H - -/* MSM ARM11 Interrupt Numbers */ -/* See 80-VE113-1 A, pp219-221 */ - -#define INT_A9_M2A_0 0 -#define INT_A9_M2A_1 1 -#define INT_A9_M2A_2 2 -#define INT_A9_M2A_3 3 -#define INT_A9_M2A_4 4 -#define INT_A9_M2A_5 5 -#define INT_A9_M2A_6 6 -#define INT_GP_TIMER_EXP 7 -#define INT_DEBUG_TIMER_EXP 8 -#define INT_UART1 9 -#define INT_UART2 10 -#define INT_UART3 11 -#define INT_UART1_RX 12 -#define INT_UART2_RX 13 -#define INT_UART3_RX 14 -#define INT_USB_OTG 15 -#define INT_MDDI_PRI 16 -#define INT_MDDI_EXT 17 -#define INT_MDDI_CLIENT 18 -#define INT_MDP 19 -#define INT_GRAPHICS 20 -#define INT_ADM_AARM 21 -#define INT_ADSP_A11 22 -#define INT_ADSP_A9_A11 23 -#define INT_SDC1_0 24 -#define INT_SDC1_1 25 -#define INT_SDC2_0 26 -#define INT_SDC2_1 27 -#define INT_KEYSENSE 28 -#define INT_TCHSCRN_SSBI 29 -#define INT_TCHSCRN1 30 -#define INT_TCHSCRN2 31 - -#define INT_GPIO_GROUP1 (32 + 0) -#define INT_GPIO_GROUP2 (32 + 1) -#define INT_PWB_I2C (32 + 2) -#define INT_SOFTRESET (32 + 3) -#define INT_NAND_WR_ER_DONE (32 + 4) -#define INT_NAND_OP_DONE (32 + 5) -#define INT_PBUS_ARM11 (32 + 6) -#define INT_AXI_MPU_SMI (32 + 7) -#define INT_AXI_MPU_EBI1 (32 + 8) -#define INT_AD_HSSD (32 + 9) -#define INT_ARM11_PMU (32 + 10) -#define INT_ARM11_DMA (32 + 11) -#define INT_TSIF_IRQ (32 + 12) -#define INT_UART1DM_IRQ (32 + 13) -#define INT_UART1DM_RX (32 + 14) -#define INT_USB_HS (32 + 15) -#define INT_SDC3_0 (32 + 16) -#define INT_SDC3_1 (32 + 17) -#define INT_SDC4_0 (32 + 18) -#define INT_SDC4_1 (32 + 19) -#define INT_UART2DM_RX (32 + 20) -#define INT_UART2DM_IRQ (32 + 21) - -/* 22-31 are reserved */ - -#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31)) - -#define NR_MSM_IRQS 64 -#define NR_GPIO_IRQS 122 -#define NR_BOARD_IRQS 64 -#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) - -#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n)) - -#endif diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h deleted file mode 100644 index b5ce0e9ac86..00000000000 --- a/include/asm-arm/arch-msm/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/include/asm-arm/arch-msm/memory.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* physical offset of RAM */ -#define PHYS_OFFSET UL(0x10000000) - -/* bus address and physical addresses are identical */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif - diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h deleted file mode 100644 index b8955cc26fe..00000000000 --- a/include/asm-arm/arch-msm/msm_iomap.h +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/include/asm-arm/arch-msm/msm_iomap.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_H -#define __ASM_ARCH_MSM_IOMAP_H - -#include - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE 0xE0000000 -#define MSM_VIC_PHYS 0xC0000000 -#define MSM_VIC_SIZE SZ_4K - -#define MSM_CSR_BASE 0xE0001000 -#define MSM_CSR_PHYS 0xC0100000 -#define MSM_CSR_SIZE SZ_4K - -#define MSM_GPT_PHYS MSM_CSR_PHYS -#define MSM_GPT_BASE MSM_CSR_BASE -#define MSM_GPT_SIZE SZ_4K - -#define MSM_DMOV_BASE 0xE0002000 -#define MSM_DMOV_PHYS 0xA9700000 -#define MSM_DMOV_SIZE SZ_4K - -#define MSM_UART1_BASE 0xE0003000 -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_BASE 0xE0004000 -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_BASE 0xE0005000 -#define MSM_UART3_PHYS 0xA9C00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_I2C_BASE 0xE0006000 -#define MSM_I2C_PHYS 0xA9900000 -#define MSM_I2C_SIZE SZ_4K - -#define MSM_GPIO1_BASE 0xE0007000 -#define MSM_GPIO1_PHYS 0xA9200000 -#define MSM_GPIO1_SIZE SZ_4K - -#define MSM_GPIO2_BASE 0xE0008000 -#define MSM_GPIO2_PHYS 0xA9300000 -#define MSM_GPIO2_SIZE SZ_4K - -#define MSM_HSUSB_BASE 0xE0009000 -#define MSM_HSUSB_PHYS 0xA0800000 -#define MSM_HSUSB_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE 0xE000A000 -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_PMDH_BASE 0xE000B000 -#define MSM_PMDH_PHYS 0xAA600000 -#define MSM_PMDH_SIZE SZ_4K - -#define MSM_EMDH_BASE 0xE000C000 -#define MSM_EMDH_PHYS 0xAA700000 -#define MSM_EMDH_SIZE SZ_4K - -#define MSM_MDP_BASE 0xE0010000 -#define MSM_MDP_PHYS 0xAA200000 -#define MSM_MDP_SIZE 0x000F0000 - -#define MSM_SHARED_RAM_BASE 0xE0100000 -#define MSM_SHARED_RAM_PHYS 0x01F00000 -#define MSM_SHARED_RAM_SIZE SZ_1M - -#endif diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h deleted file mode 100644 index fb31b3aa675..00000000000 --- a/include/asm-arm/arch-msm/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-msm/system.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - -void arch_idle(void); - -static inline void arch_reset(char mode) -{ - for (;;) ; /* depends on IPC w/ other core */ -} diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h deleted file mode 100644 index 8724487ab4c..00000000000 --- a/include/asm-arm/arch-msm/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-msm/timex.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_TIMEX_H -#define __ASM_ARCH_MSM_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h deleted file mode 100644 index e91ed786ffe..00000000000 --- a/include/asm-arm/arch-msm/uncompress.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/include/asm-arm/arch-msm/uncompress.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H - -#include "hardware.h" - -static void putc(int c) -{ -} - -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ -} - -static inline void arch_decomp_wdog(void) -{ -} - -#endif diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h deleted file mode 100644 index 60f8d910e82..00000000000 --- a/include/asm-arm/arch-msm/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-msm/vmalloc.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_VMALLOC_H -#define __ASM_ARCH_MSM_VMALLOC_H - -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - -#endif - diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S deleted file mode 100644 index d0595bd645e..00000000000 --- a/include/asm-arm/arch-mv78xx0/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MV78XX0_REGS_PHYS_BASE - ldrne \rx, =MV78XX0_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h deleted file mode 100644 index 40a8c178f10..00000000000 --- a/include/asm-arm/arch-mv78xx0/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S deleted file mode 100644 index e9a606b1266..00000000000 --- a/include/asm-arm/arch-mv78xx0/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/entry-macro.S - * - * Low-level IRQ helper macros for Marvell MV78xx0 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 - ands \irqstat, \irqstat, \tmp - - @ if no low interrupts set, check high interrupts - ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF] - moveq \irqnr, #63 - andeqs \irqstat, \irqstat, \tmp - - @ find first active interrupt source - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h deleted file mode 100644 index 8e17926086c..00000000000 --- a/include/asm-arm/arch-mv78xx0/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/hardware.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "mv78xx0.h" - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */ - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h deleted file mode 100644 index 415d4c98e3d..00000000000 --- a/include/asm-arm/arch-mv78xx0/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "mv78xx0.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0)) - + MV78XX0_PCIE_IO_VIRT_BASE(0)); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h deleted file mode 100644 index 75930450cd6..00000000000 --- a/include/asm-arm/arch-mv78xx0/irqs.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/irqs.h - * - * IRQ definitions for Marvell MV78xx0 SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "mv78xx0.h" /* need GPIO_MAX */ - -/* - * MV78xx0 Low Interrupt Controller - */ -#define IRQ_MV78XX0_ERR 0 -#define IRQ_MV78XX0_SPI 1 -#define IRQ_MV78XX0_I2C_0 2 -#define IRQ_MV78XX0_I2C_1 3 -#define IRQ_MV78XX0_IDMA_0 4 -#define IRQ_MV78XX0_IDMA_1 5 -#define IRQ_MV78XX0_IDMA_2 6 -#define IRQ_MV78XX0_IDMA_3 7 -#define IRQ_MV78XX0_TIMER_0 8 -#define IRQ_MV78XX0_TIMER_1 9 -#define IRQ_MV78XX0_TIMER_2 10 -#define IRQ_MV78XX0_TIMER_3 11 -#define IRQ_MV78XX0_UART_0 12 -#define IRQ_MV78XX0_UART_1 13 -#define IRQ_MV78XX0_UART_2 14 -#define IRQ_MV78XX0_UART_3 15 -#define IRQ_MV78XX0_USB_0 16 -#define IRQ_MV78XX0_USB_1 17 -#define IRQ_MV78XX0_USB_2 18 -#define IRQ_MV78XX0_CRYPTO 19 -#define IRQ_MV78XX0_SDIO_0 20 -#define IRQ_MV78XX0_SDIO_1 21 -#define IRQ_MV78XX0_XOR_0 22 -#define IRQ_MV78XX0_XOR_1 23 -#define IRQ_MV78XX0_I2S_0 24 -#define IRQ_MV78XX0_I2S_1 25 -#define IRQ_MV78XX0_SATA 26 -#define IRQ_MV78XX0_TDMI 27 - -/* - * MV78xx0 High Interrupt Controller - */ -#define IRQ_MV78XX0_PCIE_00 32 -#define IRQ_MV78XX0_PCIE_01 33 -#define IRQ_MV78XX0_PCIE_02 34 -#define IRQ_MV78XX0_PCIE_03 35 -#define IRQ_MV78XX0_PCIE_10 36 -#define IRQ_MV78XX0_PCIE_11 37 -#define IRQ_MV78XX0_PCIE_12 38 -#define IRQ_MV78XX0_PCIE_13 39 -#define IRQ_MV78XX0_GE00_SUM 40 -#define IRQ_MV78XX0_GE00_RX 41 -#define IRQ_MV78XX0_GE00_TX 42 -#define IRQ_MV78XX0_GE00_MISC 43 -#define IRQ_MV78XX0_GE01_SUM 44 -#define IRQ_MV78XX0_GE01_RX 45 -#define IRQ_MV78XX0_GE01_TX 46 -#define IRQ_MV78XX0_GE01_MISC 47 -#define IRQ_MV78XX0_GE10_SUM 48 -#define IRQ_MV78XX0_GE10_RX 49 -#define IRQ_MV78XX0_GE10_TX 50 -#define IRQ_MV78XX0_GE10_MISC 51 -#define IRQ_MV78XX0_GE11_SUM 52 -#define IRQ_MV78XX0_GE11_RX 53 -#define IRQ_MV78XX0_GE11_TX 54 -#define IRQ_MV78XX0_GE11_MISC 55 -#define IRQ_MV78XX0_GPIO_0_7 56 -#define IRQ_MV78XX0_GPIO_8_15 57 -#define IRQ_MV78XX0_GPIO_16_23 58 -#define IRQ_MV78XX0_GPIO_24_31 59 -#define IRQ_MV78XX0_DB_IN 60 -#define IRQ_MV78XX0_DB_OUT 61 - -/* - * MV78XX0 General Purpose Pins - */ -#define IRQ_MV78XX0_GPIO_START 64 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h deleted file mode 100644 index 721a6b185b9..00000000000 --- a/include/asm-arm/arch-mv78xx0/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h deleted file mode 100644 index 9f5d83c73fa..00000000000 --- a/include/asm-arm/arch-mv78xx0/mv78xx0.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/mv78xx0.h - * - * Generic definitions for Marvell MV78xx0 SoC flavors: - * MV781x0 and MV782x0. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_MV78XX0_H -#define __ASM_ARCH_MV78XX0_H - -/* - * Marvell MV78xx0 address maps. - * - * phys - * c0000000 PCIe Memory space - * f0800000 PCIe #0 I/O space - * f0900000 PCIe #1 I/O space - * f0a00000 PCIe #2 I/O space - * f0b00000 PCIe #3 I/O space - * f0c00000 PCIe #4 I/O space - * f0d00000 PCIe #5 I/O space - * f0e00000 PCIe #6 I/O space - * f0f00000 PCIe #7 I/O space - * f1000000 on-chip peripheral registers - * - * virt phys size - * fe400000 f102x000 16K core-specific peripheral registers - * fe700000 f0800000 1M PCIe #0 I/O space - * fe800000 f0900000 1M PCIe #1 I/O space - * fe900000 f0a00000 1M PCIe #2 I/O space - * fea00000 f0b00000 1M PCIe #3 I/O space - * feb00000 f0c00000 1M PCIe #4 I/O space - * fec00000 f0d00000 1M PCIe #5 I/O space - * fed00000 f0e00000 1M PCIe #6 I/O space - * fee00000 f0f00000 1M PCIe #7 I/O space - * fef00000 f1000000 1M on-chip peripheral registers - */ -#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 -#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 -#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 -#define MV78XX0_CORE_REGS_SIZE SZ_16K - -#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_SIZE SZ_1M - -#define MV78XX0_REGS_PHYS_BASE 0xf1000000 -#define MV78XX0_REGS_VIRT_BASE 0xfef00000 -#define MV78XX0_REGS_SIZE SZ_1M - -#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 -#define MV78XX0_PCIE_MEM_SIZE 0x30000000 - -/* - * Core-specific peripheral registers. - */ -#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -/* - * Register Map - */ -#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700) - -#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) -#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) -#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200) -#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200) -#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300) -#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300) - -#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000) -#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000) - -#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000) -#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000) -#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000) -#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000) - -#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000) -#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000) -#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000) - -#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000) - -#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000) -#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000) -#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000) -#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000) - -#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) - - -#define GPIO_MAX 32 - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h deleted file mode 100644 index 7eb47d376db..00000000000 --- a/include/asm-arm/arch-mv78xx0/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h deleted file mode 100644 index a854b1ccbd0..00000000000 --- a/include/asm-arm/arch-mv78xx0/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h deleted file mode 100644 index 3bfe0a293ef..00000000000 --- a/include/asm-arm/arch-mv78xx0/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h deleted file mode 100644 index f2c51219757..00000000000 --- a/include/asm-arm/arch-mv78xx0/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000 diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/include/asm-arm/arch-mxc/board-mx27ads.h deleted file mode 100644 index 61e66dac90e..00000000000 --- a/include/asm-arm/arch-mxc/board-mx27ads.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ - -/* external interrupt multiplexer */ -#define MXC_EXP_IO_BASE (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES) - -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* - * MXC UART EVB board level configurations - */ - -#define MXC_LL_EXTUART_PADDR (CS4_BASE_ADDR + 0x20000) -#define MXC_LL_EXTUART_VADDR (CS4_BASE_ADDR_VIRT + 0x20000) -#define MXC_LL_EXTUART_16BIT_BUS - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) - -/* - * @name Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M - -/* - * PBC Controller parameters - */ - -/* - * Base address of PBC controller, CS4 - */ -#define PBC_BASE_ADDRESS 0xEB000000 -#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset)) - -/* - * PBC Interupt name definitions - */ -#define PBC_GPIO1_0 0 -#define PBC_GPIO1_1 1 -#define PBC_GPIO1_2 2 -#define PBC_GPIO1_3 3 -#define PBC_GPIO1_4 4 -#define PBC_GPIO1_5 5 - -#define PBC_INTR_MAX_NUM 6 -#define PBC_INTR_SHARED_MAX_NUM 8 - -/* When the PBC address connection is fixed in h/w, defined as 1 */ -#define PBC_ADDR_SH 0 - -/* Offsets for the PBC Controller register */ -/* - * PBC Board version register offset - */ -#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 set address. - */ -#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 clear address. - */ -#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) -/* - * PBC Board control register 2 set address. - */ -#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) -/* - * PBC Board control register 2 clear address. - */ -#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 clear address. - */ -#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) -/* - * PBC Board control register 4 clear address. - */ -#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) -/*PBC_ADDR_SH - * PBC Board status register 1. - */ -#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) -/* - * PBC Board interrupt status register. - */ -#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) -/* - * PBC Board interrupt current status register. - */ -#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register set address. - */ -#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register clear address. - */ -#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) -/* - * External UART A. - */ -#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Status. - */ -#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Set. - */ -#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Clear. - */ -#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) -/* - * Ethernet Controller IO base address. - */ -#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) -/* - * Ethernet Controller Memory base address. - */ -#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) -/* - * Ethernet Controller DMA base address. - */ -#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) - -/* PBC Board Version Register bit definition */ -#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ -#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ - -/* PBC Board Control Register 1 bit definitions */ -#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ -#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ -#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ -#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ -#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ - -/* PBC Board Control Register 2 bit definitions */ -#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ -#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ -#define PBC_BCTRL2_ATAFEC_EN 0X0010 -#define PBC_BCTRL2_ATAFEC_SEL 0X0020 -#define PBC_BCTRL2_ATA_EN 0X0040 -#define PBC_BCTRL2_IRDA_SD 0X0080 -#define PBC_BCTRL2_IRDA_EN 0X0100 -#define PBC_BCTRL2_CCTL10 0X0200 -#define PBC_BCTRL2_CCTL11 0X0400 - -/* PBC Board Control Register 3 bit definitions */ -#define PBC_BCTRL3_HSH_EN 0X0020 -#define PBC_BCTRL3_FSH_MOD 0X0040 -#define PBC_BCTRL3_OTG_HS_EN 0X0080 -#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 -#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 -#define PBC_BCTRL3_USB_OTG_ON 0X0800 -#define PBC_BCTRL3_USB_FSH_ON 0X1000 - -/* PBC Board Control Register 4 bit definitions */ -#define PBC_BCTRL4_REGEN_SEL 0X0001 -#define PBC_BCTRL4_USER_OFF 0X0002 -#define PBC_BCTRL4_VIB_EN 0X0004 -#define PBC_BCTRL4_PWRGT1_EN 0X0008 -#define PBC_BCTRL4_PWRGT2_EN 0X0010 -#define PBC_BCTRL4_STDBY_PRI 0X0020 - -#ifndef __ASSEMBLY__ -/* - * Enumerations for SD cards and memory stick card. This corresponds to - * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. - */ -enum mxc_card_no { - MXC_CARD_SD2 = 0, - MXC_CARD_SD3, - MXC_CARD_MS, - MXC_CARD_SD1, - MXC_CARD_MIN = MXC_CARD_SD2, - MXC_CARD_MAX = MXC_CARD_SD1, -}; -#endif - -#define MXC_CPLD_VER_1_50 0x01 - -/* - * PBC BSTAT Register bit definitions - */ -#define PBC_BSTAT_PRI_INT 0X0001 -#define PBC_BSTAT_USB_BYP 0X0002 -#define PBC_BSTAT_ATA_IOCS16 0X0004 -#define PBC_BSTAT_ATA_CBLID 0X0008 -#define PBC_BSTAT_ATA_DASP 0X0010 -#define PBC_BSTAT_PWR_RDY 0X0020 -#define PBC_BSTAT_SD3_WP 0X0100 -#define PBC_BSTAT_SD2_WP 0X0200 -#define PBC_BSTAT_SD1_WP 0X0400 -#define PBC_BSTAT_SD3_DET 0X0800 -#define PBC_BSTAT_SD2_DET 0X1000 -#define PBC_BSTAT_SD1_DET 0X2000 -#define PBC_BSTAT_MS_DET 0X4000 -#define PBC_BSTAT_SD3_DET_BIT 11 -#define PBC_BSTAT_SD2_DET_BIT 12 -#define PBC_BSTAT_SD1_DET_BIT 13 -#define PBC_BSTAT_MS_DET_BIT 14 -#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ - ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ - ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ - ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ - 0x0)))) - -/* - * PBC UART Control Register bit definitions - */ -#define PBC_UCTRL_DCE_DCD 0X0001 -#define PBC_UCTRL_DCE_DSR 0X0002 -#define PBC_UCTRL_DCE_RI 0X0004 -#define PBC_UCTRL_DTE_DTR 0X0100 - -/* - * PBC UART Status Register bit definitions - */ -#define PBC_USTAT_DTE_DCD 0X0001 -#define PBC_USTAT_DTE_DSR 0X0002 -#define PBC_USTAT_DTE_RI 0X0004 -#define PBC_USTAT_DCE_DTR 0X0100 - -/* - * PBC Interupt mask register bit definitions - */ -#define PBC_INTR_SD3_R_EN_BIT 4 -#define PBC_INTR_SD2_R_EN_BIT 0 -#define PBC_INTR_SD1_R_EN_BIT 6 -#define PBC_INTR_MS_R_EN_BIT 5 -#define PBC_INTR_SD3_EN_BIT 13 -#define PBC_INTR_SD2_EN_BIT 12 -#define PBC_INTR_MS_EN_BIT 14 -#define PBC_INTR_SD1_EN_BIT 15 - -#define PBC_INTR_SD2_R_EN 0x0001 -#define PBC_INTR_LOW_BAT 0X0002 -#define PBC_INTR_OTG_FSOVER 0X0004 -#define PBC_INTR_FSH_OVER 0X0008 -#define PBC_INTR_SD3_R_EN 0x0010 -#define PBC_INTR_MS_R_EN 0x0020 -#define PBC_INTR_SD1_R_EN 0x0040 -#define PBC_INTR_FEC_INT 0X0080 -#define PBC_INTR_ENET_INT 0X0100 -#define PBC_INTR_OTGFS_INT 0X0200 -#define PBC_INTR_XUART_INT 0X0400 -#define PBC_INTR_CCTL12 0X0800 -#define PBC_INTR_SD2_EN 0x1000 -#define PBC_INTR_SD3_EN 0x2000 -#define PBC_INTR_MS_EN 0x4000 -#define PBC_INTR_SD1_EN 0x8000 - - - -/* For interrupts like xuart, enet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) -#define MXC_MAX_EXP_IO_LINES 16 - -/* - * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. - * - */ -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) - -/* - * This is System IRQ used by CS8900A for interrupt generation - * taken from platform.h - */ -#define CS8900AIRQ EXPIO_INT_ENET_INT -/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ -#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) - -#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) - -/* -* This is used to detect if the CPLD version is for mx27 evb board rev-a -*/ -#define PBC_CPLD_VERSION_IS_REVA() \ - ((__raw_readw(PBC_VERSION_REG) & \ - (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ - == 0) - -/* This is used to active or inactive ata signal in CPLD . - * It is dependent with hardware - */ -#define PBC_ATA_SIGNAL_ACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_CLEAR_REG) - -#define PBC_ATA_SIGNAL_INACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_SET_REG) - -#define MXC_BD_LED1 (1 << 5) -#define MXC_BD_LED2 (1 << 6) -#define MXC_BD_LED_ON(led) \ - __raw_writew(led, PBC_BCTRL1_SET_REG) -#define MXC_BD_LED_OFF(led) \ - __raw_writew(led, PBC_BCTRL1_CLEAR_REG) - -/* to determine the correct external crystal reference */ -#define CKIH_27MHZ_BIT_SET (1 << 3) - -#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h deleted file mode 100644 index 1bc6fb0f9a8..00000000000 --- a/include/asm-arm/arch-mxc/board-mx31ads.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) -/* Offsets for the PBC Controller register */ - -/* PBC Board status register offset */ -#define PBC_BSTAT 0x000002 - -/* PBC Board control register 1 set address */ -#define PBC_BCTRL1_SET 0x000004 - -/* PBC Board control register 1 clear address */ -#define PBC_BCTRL1_CLEAR 0x000006 - -/* PBC Board control register 2 set address */ -#define PBC_BCTRL2_SET 0x000008 - -/* PBC Board control register 2 clear address */ -#define PBC_BCTRL2_CLEAR 0x00000A - -/* PBC Board control register 3 set address */ -#define PBC_BCTRL3_SET 0x00000C - -/* PBC Board control register 3 clear address */ -#define PBC_BCTRL3_CLEAR 0x00000E - -/* PBC Board control register 4 set address */ -#define PBC_BCTRL4_SET 0x000010 - -/* PBC Board control register 4 clear address */ -#define PBC_BCTRL4_CLEAR 0x000012 - -/* PBC Board status register 1 */ -#define PBC_BSTAT1 0x000014 - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -/* Ethernet Controller Memory base address */ -#define PBC_CS8900A_MEMBASE 0x021000 - -/* Ethernet Controller DMA base address */ -#define PBC_CS8900A_DMABASE 0x022000 - -/* External chip select 0 */ -#define PBC_XCS0 0x040000 - -/* LCD Display enable */ -#define PBC_LCD_EN_B 0x060000 - -/* Code test debug enable */ -#define PBC_CODE_B 0x070000 - -/* PSRAM memory select */ -#define PBC_PSRAM_B 0x5000000 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) - -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) - -#define MXC_MAX_EXP_IO_LINES 16 - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/include/asm-arm/arch-mxc/board-mx31lite.h deleted file mode 100644 index e4e5cf5ad7d..00000000000 --- a/include/asm-arm/arch-mxc/board-mx31lite.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ - -#define MXC_MAX_EXP_IO_LINES 16 - - -/* - * Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M -/* - * Size of MBX buffer memory - */ -#define MXC_MBX_MEM_SIZE SZ_16M -/* - * Size of memory available to kernel - */ -#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ - diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/include/asm-arm/arch-mxc/board-pcm037.h deleted file mode 100644 index 82232ba3c8f..00000000000 --- a/include/asm-arm/arch-mxc/board-pcm037.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ -#define __ASM_ARCH_MXC_BOARD_PCM037_H__ - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h deleted file mode 100644 index 750c62afd90..00000000000 --- a/include/asm-arm/arch-mxc/board-pcm038.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ -#define __ASM_ARCH_MXC_BOARD_PCM038_H__ - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside pcm038_init(). - * - * This example here is for the development board. Refer pcm970-baseboard.c - */ - -extern void pcm970_baseboard_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/include/asm-arm/arch-mxc/clock.h b/include/asm-arm/arch-mxc/clock.h deleted file mode 100644 index 24caa2b7c91..00000000000 --- a/include/asm-arm/arch-mxc/clock.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_CLOCK_H__ -#define __ASM_ARCH_MXC_CLOCK_H__ - -#ifndef __ASSEMBLY__ -#include - -struct module; - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - int id; - /* Source clock this clk depends on */ - struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; - /* Reference count of clock enable/disable */ - __s8 usecount; - /* Register bit position for clock's enable/disable control. */ - u8 enable_shift; - /* Register address for clock's enable/disable control. */ - u32 enable_reg; - u32 flags; - /* get the current clock rate (always a fresh value) */ - unsigned long (*get_rate) (struct clk *); - /* Function ptr to set the clock to a new rate. The rate must match a - supported rate returned from round_rate. Leave blank if clock is not - programmable */ - int (*set_rate) (struct clk *, unsigned long); - /* Function ptr to round the requested clock rate to the nearest - supported rate that is less than or equal to the requested rate. */ - unsigned long (*round_rate) (struct clk *, unsigned long); - /* Function ptr to enable the clock. Leave blank if clock can not - be gated. */ - int (*enable) (struct clk *); - /* Function ptr to disable the clock. Leave blank if clock can not - be gated. */ - void (*disable) (struct clk *); - /* Function ptr to set the parent clock of the clock. */ - int (*set_parent) (struct clk *, struct clk *); -}; - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h deleted file mode 100644 index a6d2e24aab1..00000000000 --- a/include/asm-arm/arch-mxc/common.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_COMMON_H__ -#define __ASM_ARCH_MXC_COMMON_H__ - -extern void mxc_map_io(void); -extern void mxc_init_irq(void); -extern void mxc_timer_init(const char *clk_timer); -extern int mxc_clocks_init(unsigned long fref); -extern int mxc_register_gpios(void); - -#endif diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S deleted file mode 100644 index 575087f8561..00000000000 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/include/asm-arm/arch-imx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -#ifdef CONFIG_MACH_MX31ADS -#include -#endif -#ifdef CONFIG_MACH_PCM037 -#include -#endif -#ifdef CONFIG_MACH_MX31LITE -#include -#endif -#ifdef CONFIG_MACH_MX27ADS -#include -#endif -#ifdef CONFIG_MACH_PCM038 -#include -#endif - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MXC_LL_UART_PADDR @ physical - ldrne \rx, =MXC_LL_UART_VADDR @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h deleted file mode 100644 index c822d569a05..00000000000 --- a/include/asm-arm/arch-mxc/dma.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_DMA_H__ -#define __ASM_ARCH_MXC_DMA_H__ - -#endif diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/include/asm-arm/arch-mxc/entry-macro.S deleted file mode 100644 index b542433afb1..00000000000 --- a/include/asm-arm/arch-mxc/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2007 Lennert Buytenhek - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - @ this macro disables fast irq (not implemented) - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - @ this macro checks which interrupt occured - @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR) - @ Load offset & priority of the highest priority - @ interrupt pending from AVIC_NIVECSR - ldr \irqstat, [\base, #0x40] - @ Shift to get the decoded IRQ number, using ASR so - @ 'no interrupt pending' becomes 0xffffffff - mov \irqnr, \irqstat, asr #16 - @ set zero flag if IRQ + 1 == 0 - adds \tmp, \irqnr, #1 - .endm - - @ irq priority table (not used) - .macro irq_prio_table - .endm diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h deleted file mode 100644 index 5f13a65e404..00000000000 --- a/include/asm-arm/arch-mxc/gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_GPIO_H__ -#define __ASM_ARCH_MXC_GPIO_H__ - -#include -#include - -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio)) -#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES) - -struct mxc_gpio_port { - void __iomem *base; - int irq; - int virtual_irq_start; - struct gpio_chip chip; -}; - -int mxc_gpio_init(struct mxc_gpio_port*, int); - -#endif diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h deleted file mode 100644 index 37cddbaaade..00000000000 --- a/include/asm-arm/arch-mxc/hardware.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#define __ASM_ARCH_MXC_HARDWARE_H__ - -#include - -#ifdef CONFIG_ARCH_MX3 -# include -#endif - -#ifdef CONFIG_ARCH_MX2 -# ifdef CONFIG_MACH_MX27 -# include -# endif -#endif - -#include - -#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/iim.h b/include/asm-arm/arch-mxc/iim.h deleted file mode 100644 index 315bffadafd..00000000000 --- a/include/asm-arm/arch-mxc/iim.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_IIM_H__ -#define __ASM_ARCH_MXC_IIM_H__ - -/* Register offsets */ -#define MXC_IIMSTAT 0x0000 -#define MXC_IIMSTATM 0x0004 -#define MXC_IIMERR 0x0008 -#define MXC_IIMEMASK 0x000C -#define MXC_IIMFCTL 0x0010 -#define MXC_IIMUA 0x0014 -#define MXC_IIMLA 0x0018 -#define MXC_IIMSDAT 0x001C -#define MXC_IIMPREV 0x0020 -#define MXC_IIMSREV 0x0024 -#define MXC_IIMPRG_P 0x0028 -#define MXC_IIMSCS0 0x002C -#define MXC_IIMSCS1 0x0030 -#define MXC_IIMSCS2 0x0034 -#define MXC_IIMSCS3 0x0038 -#define MXC_IIMFBAC0 0x0800 -#define MXC_IIMJAC 0x0804 -#define MXC_IIMHWV1 0x0808 -#define MXC_IIMHWV2 0x080C -#define MXC_IIMHAB0 0x0810 -#define MXC_IIMHAB1 0x0814 -/* Definitions for i.MX27 TO2 */ -#define MXC_IIMMAC 0x0814 -#define MXC_IIMPREV_FUSE 0x0818 -#define MXC_IIMSREV_FUSE 0x081C -#define MXC_IIMSJC_CHALL_0 0x0820 -#define MXC_IIMSJC_CHALL_7 0x083C -#define MXC_IIMFB0UC17 0x0840 -#define MXC_IIMFB0UC255 0x0BFC -#define MXC_IIMFBAC1 0x0C00 -/* Definitions for i.MX27 TO2 */ -#define MXC_IIMSUID 0x0C04 -#define MXC_IIMKEY0 0x0C04 -#define MXC_IIMKEY20 0x0C54 -#define MXC_IIMSJC_RESP_0 0x0C58 -#define MXC_IIMSJC_RESP_7 0x0C74 -#define MXC_IIMFB1UC30 0x0C78 -#define MXC_IIMFB1UC255 0x0FFC - -/* Bit definitions */ - -#define MXC_IIMHWV1_WLOCK (0x1 << 7) -#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6) -#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5) -#define MXC_IIMHWV1_BOOT_INT (0x1 << 4) -#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3) -#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2) -#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1) - -#define MXC_IIMHWV2_WLOCK (0x1 << 7) -#define MXC_IIMHWV2_BP_SDMA (0x1 << 6) -#define MXC_IIMHWV2_SCM_DCM (0x1 << 5) - -#endif /* __ASM_ARCH_MXC_IIM_H__ */ diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/include/asm-arm/arch-mxc/imx-uart.h deleted file mode 100644 index 83fb72c4048..00000000000 --- a/include/asm-arm/arch-mxc/imx-uart.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - -#endif diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h deleted file mode 100644 index 65b6810124c..00000000000 --- a/include/asm-arm/arch-mxc/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IO_H__ -#define __ASM_ARCH_MXC_IO_H__ - -/* Allow IO space to be anywhere in the memory */ -#define IO_SPACE_LIMIT 0xffffffff - -/* io address mapping macro */ -#define __io(a) ((void __iomem *)(a)) - -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h deleted file mode 100644 index 076d37b38eb..00000000000 --- a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef _MXC_GPIO_MX1_MX2_H -#define _MXC_GPIO_MX1_MX2_H - -#include - -#define MXC_GPIO_ALLOC_MODE_NORMAL 0 -#define MXC_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define MXC_GPIO_ALLOC_MODE_RELEASE 8 - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#ifdef CONFIG_ARCH_MX1 -# define GPIO_PORT_MAX 3 -#endif -#ifdef CONFIG_ARCH_MX2 -# define GPIO_PORT_MAX 5 -#endif - -#ifndef GPIO_PORT_MAX -# error "GPIO config port count unknown!" -#endif - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) - -extern void mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -/*-------------------------------------------------------------------------*/ - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#ifdef CONFIG_ARCH_MX1 -#define PA0_AIN_SPI2_CLK (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24) -#define PC25_BIN_UART3_DSR (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25) -#define PC26_AOUT_UART3_DTR (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27) -#define PC28_BIN_UART3_CTS (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28) -#define PC29_AOUT_UART3_RTS (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8) -#define PD8_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10) -#define PD10_AIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31) -#endif - -#ifdef CONFIG_ARCH_MX2 -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21) -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13) -#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23) -#endif - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5) - -#define IRQ_GPIOA(x) (MXC_MAX_INT_LINES + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -#endif /* _MXC_GPIO_MX1_MX2_H */ diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/include/asm-arm/arch-mxc/iomux-mx3.h deleted file mode 100644 index 7509e7692f0..00000000000 --- a/include/asm-arm/arch-mxc/iomux-mx3.h +++ /dev/null @@ -1,501 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MX31_IOMUX_H__ -#define __MACH_MX31_IOMUX_H__ - -#include - -/* - * various IOMUX output functions - */ - -#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ -#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ -#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ -#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ -#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ -#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ -#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ -#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ -#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ -#define IOMUX_ICONFIG_FUNC 2 /* used as function */ -#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ -#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ - -#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) -#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) -#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) -#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) - -/* - * various IOMUX pad functions - */ -enum iomux_pad_config { - PAD_CTL_NOLOOPBACK = 0x0 << 9, - PAD_CTL_LOOPBACK = 0x1 << 9, - PAD_CTL_PKE_NONE = 0x0 << 8, - PAD_CTL_PKE_ENABLE = 0x1 << 8, - PAD_CTL_PUE_KEEPER = 0x0 << 7, - PAD_CTL_PUE_PUD = 0x1 << 7, - PAD_CTL_100K_PD = 0x0 << 5, - PAD_CTL_100K_PU = 0x1 << 5, - PAD_CTL_47K_PU = 0x2 << 5, - PAD_CTL_22K_PU = 0x3 << 5, - PAD_CTL_HYS_CMOS = 0x0 << 4, - PAD_CTL_HYS_SCHMITZ = 0x1 << 4, - PAD_CTL_ODE_CMOS = 0x0 << 3, - PAD_CTL_ODE_OpenDrain = 0x1 << 3, - PAD_CTL_DRV_NORMAL = 0x0 << 1, - PAD_CTL_DRV_HIGH = 0x1 << 1, - PAD_CTL_DRV_MAX = 0x2 << 1, - PAD_CTL_SRE_SLOW = 0x0 << 0, - PAD_CTL_SRE_FAST = 0x1 << 0 -}; - -/* - * various IOMUX general purpose functions - */ -enum iomux_gp_func { - MUX_PGP_FIRI = 1 << 0, - MUX_DDR_MODE = 1 << 1, - MUX_PGP_CSPI_BB = 1 << 2, - MUX_PGP_ATA_1 = 1 << 3, - MUX_PGP_ATA_2 = 1 << 4, - MUX_PGP_ATA_3 = 1 << 5, - MUX_PGP_ATA_4 = 1 << 6, - MUX_PGP_ATA_5 = 1 << 7, - MUX_PGP_ATA_6 = 1 << 8, - MUX_PGP_ATA_7 = 1 << 9, - MUX_PGP_ATA_8 = 1 << 10, - MUX_PGP_UH2 = 1 << 11, - MUX_SDCTL_CSD0_SEL = 1 << 12, - MUX_SDCTL_CSD1_SEL = 1 << 13, - MUX_CSPI1_UART3 = 1 << 14, - MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, - MUX_TAMPER_DETECT_EN = 1 << 16, - MUX_PGP_USB_4WIRE = 1 << 17, - MUX_PGB_USB_COMMON = 1 << 18, - MUX_SDHC_MEMSTICK1 = 1 << 19, - MUX_SDHC_MEMSTICK2 = 1 << 20, - MUX_PGP_SPLL_BYP = 1 << 21, - MUX_PGP_UPLL_BYP = 1 << 22, - MUX_PGP_MSHC1_CLK_SEL = 1 << 23, - MUX_PGP_MSHC2_CLK_SEL = 1 << 24, - MUX_CSPI3_UART5_SEL = 1 << 25, - MUX_PGP_ATA_9 = 1 << 26, - MUX_PGP_USB_SUSPEND = 1 << 27, - MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, - MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, - MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, - MUX_CLKO_DDR_MODE = 1 << 31, -}; - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void iomux_config_gpr(enum iomux_gp_func , bool); - -/* - * set the mode for a IOMUX pin. - */ -int mxc_iomux_mode(unsigned int); - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void mxc_iomux_set_gpr(enum iomux_gp_func, bool); - -#define IOMUX_PADNUM_MASK 0x1ff -#define IOMUX_GPIONUM_SHIFT 9 -#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) -#define IOMUX_MODE_SHIFT 17 -#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT) - -#define IOMUX_PIN(gpionum, padnum) \ - (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \ - (padnum & IOMUX_PADNUM_MASK)) - -#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT) - -#define IOMUX_TO_GPIO(iomux_pin) \ - ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) -#define IOMUX_TO_IRQ(iomux_pin) \ - (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \ - MXC_GPIO_INT_BASE) - -/* - * This enumeration is constructed based on the Section - * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated - * value is constructed based on the rules described above. - */ - -enum iomux_pins { - MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0), - MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1), - MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2), - MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3), - MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4), - MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5), - MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6), - MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7), - MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8), - MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9), - MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10), - MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11), - MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12), - MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13), - MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14), - MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15), - MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16), - MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17), - MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18), - MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), - MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), - MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), - MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), - MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), - MX31_PIN_READ = IOMUX_PIN(0xff, 24), - MX31_PIN_WRITE = IOMUX_PIN(0xff, 25), - MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26), - MX31_PIN_SER_RS = IOMUX_PIN(89, 27), - MX31_PIN_LCS1 = IOMUX_PIN(88, 28), - MX31_PIN_LCS0 = IOMUX_PIN(87, 29), - MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30), - MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31), - MX31_PIN_SD_D_I = IOMUX_PIN(84, 32), - MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), - MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), - MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), - MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36), - MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), - MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), - MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), - MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), - MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), - MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), - MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), - MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), - MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), - MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), - MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), - MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), - MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), - MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), - MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), - MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), - MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), - MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), - MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55), - MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56), - MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57), - MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58), - MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59), - MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60), - MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61), - MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62), - MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63), - MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64), - MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65), - MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66), - MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67), - MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68), - MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69), - MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70), - MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71), - MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72), - MX31_PIN_USB_BYP = IOMUX_PIN(31, 73), - MX31_PIN_USB_OC = IOMUX_PIN(30, 74), - MX31_PIN_USB_PWR = IOMUX_PIN(29, 75), - MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76), - MX31_PIN_DE_B = IOMUX_PIN(0xff, 77), - MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78), - MX31_PIN_TDO = IOMUX_PIN(0xff, 79), - MX31_PIN_TDI = IOMUX_PIN(0xff, 80), - MX31_PIN_TMS = IOMUX_PIN(0xff, 81), - MX31_PIN_TCK = IOMUX_PIN(0xff, 82), - MX31_PIN_RTCK = IOMUX_PIN(0xff, 83), - MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84), - MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85), - MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86), - MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87), - MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88), - MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89), - MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90), - MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91), - MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92), - MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93), - MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94), - MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95), - MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96), - MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97), - MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98), - MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99), - MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100), - MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101), - MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102), - MX31_PIN_TXD2 = IOMUX_PIN(28, 103), - MX31_PIN_RXD2 = IOMUX_PIN(27, 104), - MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105), - MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106), - MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107), - MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108), - MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109), - MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110), - MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111), - MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112), - MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113), - MX31_PIN_CTS1 = IOMUX_PIN(39, 114), - MX31_PIN_RTS1 = IOMUX_PIN(38, 115), - MX31_PIN_TXD1 = IOMUX_PIN(37, 116), - MX31_PIN_RXD1 = IOMUX_PIN(36, 117), - MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118), - MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119), - MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120), - MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121), - MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122), - MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123), - MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124), - MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125), - MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126), - MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127), - MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128), - MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129), - MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130), - MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131), - MX31_PIN_SFS6 = IOMUX_PIN(26, 132), - MX31_PIN_SCK6 = IOMUX_PIN(25, 133), - MX31_PIN_SRXD6 = IOMUX_PIN(24, 134), - MX31_PIN_STXD6 = IOMUX_PIN(23, 135), - MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136), - MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137), - MX31_PIN_SRXD5 = IOMUX_PIN(22, 138), - MX31_PIN_STXD5 = IOMUX_PIN(21, 139), - MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140), - MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141), - MX31_PIN_SRXD4 = IOMUX_PIN(20, 142), - MX31_PIN_STXD4 = IOMUX_PIN(19, 143), - MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144), - MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145), - MX31_PIN_SRXD3 = IOMUX_PIN(18, 146), - MX31_PIN_STXD3 = IOMUX_PIN(17, 147), - MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148), - MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149), - MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150), - MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151), - MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152), - MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153), - MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154), - MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155), - MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156), - MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157), - MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158), - MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159), - MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160), - MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161), - MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162), - MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163), - MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164), - MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165), - MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166), - MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167), - MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168), - MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169), - MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170), - MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171), - MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172), - MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173), - MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174), - MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175), - MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176), - MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177), - MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178), - MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179), - MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180), - MX31_PIN_D0 = IOMUX_PIN(0xff, 181), - MX31_PIN_D1 = IOMUX_PIN(0xff, 182), - MX31_PIN_D2 = IOMUX_PIN(0xff, 183), - MX31_PIN_D3 = IOMUX_PIN(0xff, 184), - MX31_PIN_D4 = IOMUX_PIN(0xff, 185), - MX31_PIN_D5 = IOMUX_PIN(0xff, 186), - MX31_PIN_D6 = IOMUX_PIN(0xff, 187), - MX31_PIN_D7 = IOMUX_PIN(0xff, 188), - MX31_PIN_D8 = IOMUX_PIN(0xff, 189), - MX31_PIN_D9 = IOMUX_PIN(0xff, 190), - MX31_PIN_D10 = IOMUX_PIN(0xff, 191), - MX31_PIN_D11 = IOMUX_PIN(0xff, 192), - MX31_PIN_D12 = IOMUX_PIN(0xff, 193), - MX31_PIN_D13 = IOMUX_PIN(0xff, 194), - MX31_PIN_D14 = IOMUX_PIN(0xff, 195), - MX31_PIN_D15 = IOMUX_PIN(0xff, 196), - MX31_PIN_NFRB = IOMUX_PIN(16, 197), - MX31_PIN_NFCE_B = IOMUX_PIN(15, 198), - MX31_PIN_NFWP_B = IOMUX_PIN(14, 199), - MX31_PIN_NFCLE = IOMUX_PIN(13, 200), - MX31_PIN_NFALE = IOMUX_PIN(12, 201), - MX31_PIN_NFRE_B = IOMUX_PIN(11, 202), - MX31_PIN_NFWE_B = IOMUX_PIN(10, 203), - MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204), - MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205), - MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206), - MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207), - MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208), - MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209), - MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210), - MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211), - MX31_PIN_SDWE = IOMUX_PIN(0xff, 212), - MX31_PIN_CAS = IOMUX_PIN(0xff, 213), - MX31_PIN_RAS = IOMUX_PIN(0xff, 214), - MX31_PIN_RW = IOMUX_PIN(0xff, 215), - MX31_PIN_BCLK = IOMUX_PIN(0xff, 216), - MX31_PIN_LBA = IOMUX_PIN(0xff, 217), - MX31_PIN_ECB = IOMUX_PIN(0xff, 218), - MX31_PIN_CS5 = IOMUX_PIN(0xff, 219), - MX31_PIN_CS4 = IOMUX_PIN(0xff, 220), - MX31_PIN_CS3 = IOMUX_PIN(0xff, 221), - MX31_PIN_CS2 = IOMUX_PIN(0xff, 222), - MX31_PIN_CS1 = IOMUX_PIN(0xff, 223), - MX31_PIN_CS0 = IOMUX_PIN(0xff, 224), - MX31_PIN_OE = IOMUX_PIN(0xff, 225), - MX31_PIN_EB1 = IOMUX_PIN(0xff, 226), - MX31_PIN_EB0 = IOMUX_PIN(0xff, 227), - MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228), - MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229), - MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230), - MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231), - MX31_PIN_SD31 = IOMUX_PIN(0xff, 232), - MX31_PIN_SD30 = IOMUX_PIN(0xff, 233), - MX31_PIN_SD29 = IOMUX_PIN(0xff, 234), - MX31_PIN_SD28 = IOMUX_PIN(0xff, 235), - MX31_PIN_SD27 = IOMUX_PIN(0xff, 236), - MX31_PIN_SD26 = IOMUX_PIN(0xff, 237), - MX31_PIN_SD25 = IOMUX_PIN(0xff, 238), - MX31_PIN_SD24 = IOMUX_PIN(0xff, 239), - MX31_PIN_SD23 = IOMUX_PIN(0xff, 240), - MX31_PIN_SD22 = IOMUX_PIN(0xff, 241), - MX31_PIN_SD21 = IOMUX_PIN(0xff, 242), - MX31_PIN_SD20 = IOMUX_PIN(0xff, 243), - MX31_PIN_SD19 = IOMUX_PIN(0xff, 244), - MX31_PIN_SD18 = IOMUX_PIN(0xff, 245), - MX31_PIN_SD17 = IOMUX_PIN(0xff, 246), - MX31_PIN_SD16 = IOMUX_PIN(0xff, 247), - MX31_PIN_SD15 = IOMUX_PIN(0xff, 248), - MX31_PIN_SD14 = IOMUX_PIN(0xff, 249), - MX31_PIN_SD13 = IOMUX_PIN(0xff, 250), - MX31_PIN_SD12 = IOMUX_PIN(0xff, 251), - MX31_PIN_SD11 = IOMUX_PIN(0xff, 252), - MX31_PIN_SD10 = IOMUX_PIN(0xff, 253), - MX31_PIN_SD9 = IOMUX_PIN(0xff, 254), - MX31_PIN_SD8 = IOMUX_PIN(0xff, 255), - MX31_PIN_SD7 = IOMUX_PIN(0xff, 256), - MX31_PIN_SD6 = IOMUX_PIN(0xff, 257), - MX31_PIN_SD5 = IOMUX_PIN(0xff, 258), - MX31_PIN_SD4 = IOMUX_PIN(0xff, 259), - MX31_PIN_SD3 = IOMUX_PIN(0xff, 260), - MX31_PIN_SD2 = IOMUX_PIN(0xff, 261), - MX31_PIN_SD1 = IOMUX_PIN(0xff, 262), - MX31_PIN_SD0 = IOMUX_PIN(0xff, 263), - MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264), - MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265), - MX31_PIN_A25 = IOMUX_PIN(0xff, 266), - MX31_PIN_A24 = IOMUX_PIN(0xff, 267), - MX31_PIN_A23 = IOMUX_PIN(0xff, 268), - MX31_PIN_A22 = IOMUX_PIN(0xff, 269), - MX31_PIN_A21 = IOMUX_PIN(0xff, 270), - MX31_PIN_A20 = IOMUX_PIN(0xff, 271), - MX31_PIN_A19 = IOMUX_PIN(0xff, 272), - MX31_PIN_A18 = IOMUX_PIN(0xff, 273), - MX31_PIN_A17 = IOMUX_PIN(0xff, 274), - MX31_PIN_A16 = IOMUX_PIN(0xff, 275), - MX31_PIN_A14 = IOMUX_PIN(0xff, 276), - MX31_PIN_A15 = IOMUX_PIN(0xff, 277), - MX31_PIN_A13 = IOMUX_PIN(0xff, 278), - MX31_PIN_A12 = IOMUX_PIN(0xff, 279), - MX31_PIN_A11 = IOMUX_PIN(0xff, 280), - MX31_PIN_MA10 = IOMUX_PIN(0xff, 281), - MX31_PIN_A10 = IOMUX_PIN(0xff, 282), - MX31_PIN_A9 = IOMUX_PIN(0xff, 283), - MX31_PIN_A8 = IOMUX_PIN(0xff, 284), - MX31_PIN_A7 = IOMUX_PIN(0xff, 285), - MX31_PIN_A6 = IOMUX_PIN(0xff, 286), - MX31_PIN_A5 = IOMUX_PIN(0xff, 287), - MX31_PIN_A4 = IOMUX_PIN(0xff, 288), - MX31_PIN_A3 = IOMUX_PIN(0xff, 289), - MX31_PIN_A2 = IOMUX_PIN(0xff, 290), - MX31_PIN_A1 = IOMUX_PIN(0xff, 291), - MX31_PIN_A0 = IOMUX_PIN(0xff, 292), - MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293), - MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294), - MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295), - MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296), - MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297), - MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298), - MX31_PIN_CKIL = IOMUX_PIN(0xff, 299), - MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300), - MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301), - MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302), - MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303), - MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304), - MX31_PIN_CLKO = IOMUX_PIN(0xff, 305), - MX31_PIN_POR_B = IOMUX_PIN(0xff, 306), - MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307), - MX31_PIN_CKIH = IOMUX_PIN(0xff, 308), - MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309), - MX31_PIN_SRX0 = IOMUX_PIN(34, 310), - MX31_PIN_STX0 = IOMUX_PIN(33, 311), - MX31_PIN_SVEN0 = IOMUX_PIN(32, 312), - MX31_PIN_SRST0 = IOMUX_PIN(67, 313), - MX31_PIN_SCLK0 = IOMUX_PIN(66, 314), - MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315), - MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316), - MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317), - MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318), - MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319), - MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320), - MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321), - MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322), - MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323), - MX31_PIN_PWMO = IOMUX_PIN( 9, 324), - MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325), - MX31_PIN_COMPARE = IOMUX_PIN( 8, 326), - MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), -}; - -/* - * Convenience values for use with mxc_iomux_mode() - * - * Format here is MX31_PIN_(pin name)__(function) - */ -#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins, u32); - -#endif - diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h deleted file mode 100644 index 21411efc10f..00000000000 --- a/include/asm-arm/arch-mxc/irqs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IRQS_H__ -#define __ASM_ARCH_MXC_IRQS_H__ - -#include - -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h deleted file mode 100644 index 7e669ee0d63..00000000000 --- a/include/asm-arm/arch-mxc/memory.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MEMORY_H__ -#define __ASM_ARCH_MXC_MEMORY_H__ - -#include - -/* - * Virtual view <-> DMA view memory address translations - * This macro is used to translate the virtual address to an address - * suitable to be passed to set_dma_addr() - */ -#define __virt_to_bus(a) __virt_to_phys(a) - -/* - * Used to convert an address for DMA operations to an address that the - * kernel can use. - */ -#define __bus_to_virt(a) __phys_to_virt(a) - -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/include/asm-arm/arch-mxc/mx27.h b/include/asm-arm/arch-mxc/mx27.h deleted file mode 100644 index 212ecc24662..00000000000 --- a/include/asm-arm/arch-mxc/mx27.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_MX27_H__ -#define __ASM_ARCH_MXC_MX27_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* IRAM */ -#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ - -/* Register offests */ -#define AIPI_BASE_ADDR 0x10000000 -#define AIPI_BASE_ADDR_VIRT 0xF4000000 -#define AIPI_SIZE SZ_1M - -#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) -#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) -#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) -#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) -#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) -#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) -#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) -#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) -#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) -#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) -#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) -#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) -#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) -#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) -#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) -#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) -#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) -#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) -#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) -#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) -#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) -#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) - -#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) -#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000) -#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000) -#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000) -#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000) -#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000) -#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000) -#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000) -#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000) - -#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) -#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) -#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000) -#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) -/* for mx27*/ -#define OTG_BASE_ADDR USBOTG_BASE_ADDR -#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000) -#define EMMA_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) -#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) -#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) -#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000) - -#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000) -#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000) -#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000) -#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000) -#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000) - -#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) -#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) - -/* ROMP and AVIC */ -#define ROMP_BASE_ADDR 0x10041000 - -#define AVIC_BASE_ADDR 0x10040000 - -#define SAHB1_BASE_ADDR 0x80000000 -#define SAHB1_BASE_ADDR_VIRT 0xF4100000 -#define SAHB1_SIZE SZ_1M - -#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) -#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000) - -/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ -#define X_MEMC_BASE_ADDR 0xD8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 -#define X_MEMC_SIZE SZ_1M - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) -#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) - -/* Memory regions and CS */ -#define SDRAM_BASE_ADDR 0xA0000000 -#define CSD1_BASE_ADDR 0xB0000000 - -#define CS0_BASE_ADDR 0xC0000000 -#define CS1_BASE_ADDR 0xC8000000 -#define CS2_BASE_ADDR 0xD0000000 -#define CS3_BASE_ADDR 0xD2000000 -#define CS4_BASE_ADDR 0xD4000000 -#define CS5_BASE_ADDR 0xD6000000 -#define PCMCIA_MEM_BASE_ADDR 0xDC000000 - -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ - AIPI_IO_ADDRESS(x) : \ - ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ - SAHB1_IO_ADDRESS(x) : \ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ - X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) - -/* define the address mapping macros: in physical address order */ -#define AIPI_IO_ADDRESS(x) \ - (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) - -#define SAHB1_IO_ADDRESS(x) \ - (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* fixed interrput numbers */ -#define MXC_INT_CCM 63 -#define MXC_INT_IIM 62 -#define MXC_INT_LCDC 61 -#define MXC_INT_SLCDC 60 -#define MXC_INT_SAHARA 59 -#define MXC_INT_SCC_SCM 58 -#define MXC_INT_SCC_SMN 57 -#define MXC_INT_USB3 56 -#define MXC_INT_USB2 55 -#define MXC_INT_USB1 54 -#define MXC_INT_VPU 53 -#define MXC_INT_EMMAPP 52 -#define MXC_INT_EMMAPRP 51 -#define MXC_INT_FEC 50 -#define MXC_INT_UART5 49 -#define MXC_INT_UART6 48 -#define MXC_INT_DMACH15 47 -#define MXC_INT_DMACH14 46 -#define MXC_INT_DMACH13 45 -#define MXC_INT_DMACH12 44 -#define MXC_INT_DMACH11 43 -#define MXC_INT_DMACH10 42 -#define MXC_INT_DMACH9 41 -#define MXC_INT_DMACH8 40 -#define MXC_INT_DMACH7 39 -#define MXC_INT_DMACH6 38 -#define MXC_INT_DMACH5 37 -#define MXC_INT_DMACH4 36 -#define MXC_INT_DMACH3 35 -#define MXC_INT_DMACH2 34 -#define MXC_INT_DMACH1 33 -#define MXC_INT_DMACH0 32 -#define MXC_INT_CSI 31 -#define MXC_INT_ATA 30 -#define MXC_INT_NANDFC 29 -#define MXC_INT_PCMCIA 28 -#define MXC_INT_WDOG 27 -#define MXC_INT_GPT1 26 -#define MXC_INT_GPT2 25 -#define MXC_INT_GPT3 24 -#define MXC_INT_GPT INT_GPT1 -#define MXC_INT_PWM 23 -#define MXC_INT_RTC 22 -#define MXC_INT_KPP 21 -#define MXC_INT_UART1 20 -#define MXC_INT_UART2 19 -#define MXC_INT_UART3 18 -#define MXC_INT_UART4 17 -#define MXC_INT_CSPI1 16 -#define MXC_INT_CSPI2 15 -#define MXC_INT_SSI1 14 -#define MXC_INT_SSI2 13 -#define MXC_INT_I2C 12 -#define MXC_INT_SDHC1 11 -#define MXC_INT_SDHC2 10 -#define MXC_INT_SDHC3 9 -#define MXC_INT_GPIO 8 -#define MXC_INT_SDHC 7 -#define MXC_INT_CSPI3 6 -#define MXC_INT_RTIC 5 -#define MXC_INT_GPT4 4 -#define MXC_INT_GPT5 3 -#define MXC_INT_GPT6 2 -#define MXC_INT_I2C2 1 - -/* fixed DMA request numbers */ -#define DMA_REQ_NFC 37 -#define DMA_REQ_SDHC3 36 -#define DMA_REQ_UART6_RX 35 -#define DMA_REQ_UART6_TX 34 -#define DMA_REQ_UART5_RX 33 -#define DMA_REQ_UART5_TX 32 -#define DMA_REQ_CSI_RX 31 -#define DMA_REQ_CSI_STAT 30 -#define DMA_REQ_ATA_RCV 29 -#define DMA_REQ_ATA_TX 28 -#define DMA_REQ_UART1_TX 27 -#define DMA_REQ_UART1_RX 26 -#define DMA_REQ_UART2_TX 25 -#define DMA_REQ_UART2_RX 24 -#define DMA_REQ_UART3_TX 23 -#define DMA_REQ_UART3_RX 22 -#define DMA_REQ_UART4_TX 21 -#define DMA_REQ_UART4_RX 20 -#define DMA_REQ_CSPI1_TX 19 -#define DMA_REQ_CSPI1_RX 18 -#define DMA_REQ_CSPI2_TX 17 -#define DMA_REQ_CSPI2_RX 16 -#define DMA_REQ_SSI1_TX1 15 -#define DMA_REQ_SSI1_RX1 14 -#define DMA_REQ_SSI1_TX0 13 -#define DMA_REQ_SSI1_RX0 12 -#define DMA_REQ_SSI2_TX1 11 -#define DMA_REQ_SSI2_RX1 10 -#define DMA_REQ_SSI2_TX0 9 -#define DMA_REQ_SSI2_RX0 8 -#define DMA_REQ_SDHC1 7 -#define DMA_REQ_SDHC2 6 -#define DMA_REQ_MSHC 4 -#define DMA_REQ_EXT 3 -#define DMA_REQ_CSPI3_TX 2 -#define DMA_REQ_CSPI3_RX 1 - -/* silicon revisions specific to i.MX27 */ -#define CHIP_REV_1_0 0x00 -#define CHIP_REV_2_0 0x01 - -#ifndef __ASSEMBLY__ -extern int mx27_revision(void); -#endif - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x1C -#define GPIO_GDIR 0x00 -#define GPIO_PSR 0x24 -#define GPIO_ICR1 0x28 -#define GPIO_ICR2 0x2C -#define GPIO_IMR 0x30 -#define GPIO_ISR 0x34 -#define GPIO_INT_LOW_LEV 0x3 -#define GPIO_INT_HIGH_LEV 0x2 -#define GPIO_INT_RISE_EDGE 0x0 -#define GPIO_INT_FALL_EDGE 0x1 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this is an i.MX27 CPU */ -#define cpu_is_mx27() (1) - -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (192 + 16) - -/* OS clock tick rate */ -#define CLOCK_TICK_RATE 13300000 - -/* Start of RAM */ -#define PHYS_OFFSET SDRAM_BASE_ADDR - -/* max interrupt lines count */ -#define NR_IRQS 256 - -/* count of internal interrupt sources */ -#define MXC_MAX_INT_LINES 64 - -#endif /* __ASM_ARCH_MXC_MX27_H__ */ diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h deleted file mode 100644 index a7373e4a56c..00000000000 --- a/include/asm-arm/arch-mxc/mx31.h +++ /dev/null @@ -1,384 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/*! - * defines the hardware clock tick rate - */ -#define CLOCK_TICK_RATE 16625000 - -/* - * MX31 memory map: - * - * Virt Phys Size What - * --------------------------------------------------------------------------- - * F8000000 1FFC0000 16K IRAM - * F9000000 30000000 256M L2CC - * FC000000 43F00000 1M AIPS 1 - * FC100000 50000000 1M SPBA - * FC200000 53F00000 1M AIPS 2 - * FC500000 60000000 128M ROMPATCH - * FC400000 68000000 128M AVIC - * 70000000 256M IPU (MAX M2) - * 80000000 256M CSD0 SDRAM/DDR - * 90000000 256M CSD1 SDRAM/DDR - * A0000000 128M CS0 Flash - * A8000000 128M CS1 Flash - * B0000000 32M CS2 - * B2000000 32M CS3 - * F4000000 B4000000 32M CS4 - * B6000000 32M CS5 - * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers - * C0000000 64M PCMCIA/CF - */ - -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/* - * IRAM - */ -#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ -#define IRAM_BASE_ADDR_VIRT 0xF8000000 -#define IRAM_SIZE SZ_16K - -/* - * L2CC - */ -#define L2CC_BASE_ADDR 0x30000000 -#define L2CC_BASE_ADDR_VIRT 0xF9000000 -#define L2CC_SIZE SZ_1M - -/* - * AIPS 1 - */ -#define AIPS1_BASE_ADDR 0x43F00000 -#define AIPS1_BASE_ADDR_VIRT 0xFC000000 -#define AIPS1_SIZE SZ_1M - -#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) -#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) -#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) -#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) -#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) -#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) -#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) -#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) -#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) -#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) -#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) -#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) -#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) -#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) -#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) -#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) -#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) -#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) -#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) - -/* - * SPBA global module enabled #0 - */ -#define SPBA0_BASE_ADDR 0x50000000 -#define SPBA0_BASE_ADDR_VIRT 0xFC100000 -#define SPBA0_SIZE SZ_1M - -#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) -#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) -#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) -#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) -#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) -#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000) -#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) -#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) - -/* - * AIPS 2 - */ -#define AIPS2_BASE_ADDR 0x53F00000 -#define AIPS2_BASE_ADDR_VIRT 0xFC200000 -#define AIPS2_SIZE SZ_1M -#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) -#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) -#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) -#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) -#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) -#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) -#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) -#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) -#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000) -#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000) -#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) -#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) -#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) -#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) -#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) -#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) -#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) -#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) -#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) -#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) -#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) - -/* - * ROMP and AVIC - */ -#define ROMP_BASE_ADDR 0x60000000 -#define ROMP_BASE_ADDR_VIRT 0xFC500000 -#define ROMP_SIZE SZ_1M - -#define AVIC_BASE_ADDR 0x68000000 -#define AVIC_BASE_ADDR_VIRT 0xFC400000 -#define AVIC_SIZE SZ_1M - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ -#define X_MEMC_BASE_ADDR 0xB8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 -#define X_MEMC_SIZE SZ_64K - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) -#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR - -/* - * Memory regions and CS - */ -#define IPU_MEM_BASE_ADDR 0x70000000 -#define CSD0_BASE_ADDR 0x80000000 -#define CSD1_BASE_ADDR 0x90000000 -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/*! - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\ - ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\ - ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ - ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ - ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ - ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ - ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ - ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ - -#define IRAM_IO_ADDRESS(x) \ - (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT) - -#define L2CC_IO_ADDRESS(x) \ - (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) - -#define AIPS1_IO_ADDRESS(x) \ - (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) - -#define SPBA0_IO_ADDRESS(x) \ - (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) - -#define AIPS2_IO_ADDRESS(x) \ - (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) - -#define ROMP_IO_ADDRESS(x) \ - (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) \ - (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */ -#define PHYS_OFFSET CSD0_BASE_ADDR - -/* - * Interrupt numbers - */ -#define MXC_INT_PEN_ADS7843 0 -#define MXC_INT_RESV1 1 -#define MXC_INT_CS8900A 2 -#define MXC_INT_I2C3 3 -#define MXC_INT_I2C2 4 -#define MXC_INT_MPEG4_ENCODER 5 -#define MXC_INT_RTIC 6 -#define MXC_INT_FIRI 7 -#define MXC_INT_MMC_SDHC2 8 -#define MXC_INT_MMC_SDHC1 9 -#define MXC_INT_I2C 10 -#define MXC_INT_SSI2 11 -#define MXC_INT_SSI1 12 -#define MXC_INT_CSPI2 13 -#define MXC_INT_CSPI1 14 -#define MXC_INT_ATA 15 -#define MXC_INT_MBX 16 -#define MXC_INT_CSPI3 17 -#define MXC_INT_UART3 18 -#define MXC_INT_IIM 19 -#define MXC_INT_SIM2 20 -#define MXC_INT_SIM1 21 -#define MXC_INT_RNGA 22 -#define MXC_INT_EVTMON 23 -#define MXC_INT_KPP 24 -#define MXC_INT_RTC 25 -#define MXC_INT_PWM 26 -#define MXC_INT_EPIT2 27 -#define MXC_INT_EPIT1 28 -#define MXC_INT_GPT 29 -#define MXC_INT_RESV30 30 -#define MXC_INT_RESV31 31 -#define MXC_INT_UART2 32 -#define MXC_INT_NANDFC 33 -#define MXC_INT_SDMA 34 -#define MXC_INT_USB1 35 -#define MXC_INT_USB2 36 -#define MXC_INT_USB3 37 -#define MXC_INT_USB4 38 -#define MXC_INT_MSHC1 39 -#define MXC_INT_MSHC2 40 -#define MXC_INT_IPU_ERR 41 -#define MXC_INT_IPU_SYN 42 -#define MXC_INT_RESV43 43 -#define MXC_INT_RESV44 44 -#define MXC_INT_UART1 45 -#define MXC_INT_UART4 46 -#define MXC_INT_UART5 47 -#define MXC_INT_ECT 48 -#define MXC_INT_SCC_SCM 49 -#define MXC_INT_SCC_SMN 50 -#define MXC_INT_GPIO2 51 -#define MXC_INT_GPIO1 52 -#define MXC_INT_CCM 53 -#define MXC_INT_PCMCIA 54 -#define MXC_INT_WDOG 55 -#define MXC_INT_GPIO3 56 -#define MXC_INT_RESV57 57 -#define MXC_INT_EXT_POWER 58 -#define MXC_INT_EXT_TEMPER 59 -#define MXC_INT_EXT_SENSOR60 60 -#define MXC_INT_EXT_SENSOR61 61 -#define MXC_INT_EXT_WDOG 62 -#define MXC_INT_EXT_TV 63 - -#define MXC_MAX_INT_LINES 64 - -#define MXC_GPIO_INT_BASE MXC_MAX_INT_LINES -#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) -#define MXC_MAX_VIRTUAL_INTS 16 - -#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS) - -/*! - * Number of GPIO port as defined in the IC Spec - */ -#define GPIO_PORT_NUM 3 -/*! - * Number of GPIO pins per port - */ -#define GPIO_NUM_PIN 32 - -#define PROD_SIGNATURE 0x1 /* For MX31 */ - -/* silicon revisions specific to i.MX31 */ -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_1_2 0x12 -#define CHIP_REV_1_3 0x13 -#define CHIP_REV_2_0 0x20 -#define CHIP_REV_2_1 0x21 -#define CHIP_REV_2_2 0x22 -#define CHIP_REV_2_3 0x23 -#define CHIP_REV_3_0 0x30 -#define CHIP_REV_3_1 0x31 -#define CHIP_REV_3_2 0x32 - -#define SYSTEM_REV_MIN CHIP_REV_1_0 -#define SYSTEM_REV_NUM 3 - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x00 -#define GPIO_GDIR 0x04 -#define GPIO_PSR 0x08 -#define GPIO_ICR1 0x0C -#define GPIO_ICR2 0x10 -#define GPIO_IMR 0x14 -#define GPIO_ISR 0x18 -#define GPIO_INT_LOW_LEV 0x0 -#define GPIO_INT_HIGH_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_FALL_EDGE 0x3 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this CPU supports up to 96 GPIOs */ -#define ARCH_NR_GPIOS 96 - -#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - -/* this is a i.MX31 CPU */ -#define cpu_is_mx31() (1) - -extern unsigned int system_rev; - -static inline int mx31_revision(void) -{ - return system_rev; -} -#endif - -#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h deleted file mode 100644 index 332eda4dbd3..00000000000 --- a/include/asm-arm/arch-mxc/mxc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_H__ -#define __ASM_ARCH_MXC_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* clean up all things that are not used */ -#ifndef CONFIG_ARCH_MX3 -# define cpu_is_mx31() (0) -#endif - -#ifndef CONFIG_MACH_MX27 -# define cpu_is_mx27() (0) -#endif - -#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h deleted file mode 100644 index 5439fa6cf61..00000000000 --- a/include/asm-arm/arch-mxc/mxc_timer.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * mxc_timer.h - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef __PLAT_MXC_TIMER_H -#define __PLAT_MXC_TIMER_H - -#include -#include - -#ifdef CONFIG_ARCH_IMX -#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) -#define TIMER_INTERRUPT TIM1_INT - -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) - -#define MXC_TCTL 0x00 -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(0, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_IMX */ - -#ifdef CONFIG_ARCH_MX2 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT1 - -#define MXC_TCTL 0x00 -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX2 */ - -#ifdef CONFIG_ARCH_MX3 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT - -#define MXC_TCTL 0x00 -#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) -#define TCTL_CLK_IPG (1<<6) -#define TCTL_FRR (1<<9) -#define TCTL_WAITEN (1<<3) - -#define MXC_TPRER 0x04 -#define MXC_TSTAT 0x08 -#define TSTAT_OF1 (1<<0) -#define TSTAT_OF2 (1<<1) -#define TSTAT_OF3 (1<<2) -#define TSTAT_IF1 (1<<3) -#define TSTAT_IF2 (1<<4) -#define TSTAT_ROV (1<<5) -#define MXC_IR 0x0c -#define MXC_TCMP 0x10 -#define MXC_TCMP2 0x14 -#define MXC_TCMP3 0x18 -#define MXC_TCR 0x1c -#define MXC_TCN 0x24 - -static inline void gpt_irq_disable(void) -{ - __raw_writel(0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(1<<0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX3 */ - -#define TCTL_SWR (1<<15) -#define TCTL_CC (1<<10) -#define TCTL_OM (1<<9) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_CAP_ENA (1<<5) -#define TCTL_TEN (1<<0) - -#endif diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h deleted file mode 100644 index bbfc37465fc..00000000000 --- a/include/asm-arm/arch-mxc/system.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_SYSTEM_H__ -#define __ASM_ARCH_MXC_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h deleted file mode 100644 index 432e0c84c50..00000000000 --- a/include/asm-arm/arch-mxc/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_TIMEX_H__ -#define __ASM_ARCH_MXC_TIMEX_H__ - -#include /* for CLOCK_TICK_RATE */ - -#endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h deleted file mode 100644 index 18f33b0cdeb..00000000000 --- a/include/asm-arm/arch-mxc/uncompress.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-arm/arch-mxc/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ -#define __ASM_ARCH_MXC_UNCOMPRESS_H__ - -#define __MXC_BOOT_UNCOMPRESS - -#include - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -static void putc(int ch) -{ - static unsigned long serial_port = 0; - - if (unlikely(serial_port == 0)) { - do { - serial_port = UART1_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - serial_port = UART2_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - return; - } while (0); - } - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = ch; -} - -#define flush() do { } while (0) - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h deleted file mode 100644 index 62d97623412..00000000000 --- a/include/asm-arm/arch-mxc/vmalloc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2000 Russell King. - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_VMALLOC_H__ -#define __ASM_ARCH_MXC_VMALLOC_H__ - -/* vmalloc ending address */ -#define VMALLOC_END 0xF4000000 - -#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S deleted file mode 100644 index a940d0e80cb..00000000000 --- a/include/asm-arm/arch-netx/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/include/asm-arm/arch-netx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include "hardware.h" - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00100000 @ physical - movne \rx, #io_p2v(0x00100000) @ virtual - orr \rx, \rx, #0x00000a00 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x18] - tst \rd, #(1 << 3) - bne 1002b - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] - tst \rd, #(1 << 3) - bne 1001b - .endm diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h deleted file mode 100644 index 4eda5feed81..00000000000 --- a/include/asm-arm/arch-netx/dma.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/dma.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define MAX_DMA_CHANNELS 0 -#define MAX_DMA_ADDRESS ~0 diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S deleted file mode 100644 index 4115bbdf97a..00000000000 --- a/include/asm-arm/arch-netx/entry-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-arm/arch-netx/entry-macro.S - * - * Low-level IRQ helper macros for Hilscher netX based platforms - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \base, #io_p2v(0x00100000) - add \base, \base, #0x000ff000 - - ldr \irqstat, [\base, #0] - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 - cmp \irqstat, #0 - .endm - diff --git a/include/asm-arm/arch-netx/eth.h b/include/asm-arm/arch-netx/eth.h deleted file mode 100644 index 643c90ef8b7..00000000000 --- a/include/asm-arm/arch-netx/eth.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-netx/eth.h - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef ASMARM_ARCH_ETH_H -#define ASMARM_ARCH_ETH_H - -struct netxeth_platform_data { - unsigned int xcno; /* number of xmac/xpec engine this eth uses */ -}; - -#endif diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h deleted file mode 100644 index 7786c45455c..00000000000 --- a/include/asm-arm/arch-netx/hardware.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-netx/hardware.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define NETX_IO_PHYS 0x00100000 -#define NETX_IO_VIRT 0xe0000000 -#define NETX_IO_SIZE 0x00100000 - -#define SRAM_INTERNAL_PHYS_0 0x00000 -#define SRAM_INTERNAL_PHYS_1 0x08000 -#define SRAM_INTERNAL_PHYS_2 0x10000 -#define SRAM_INTERNAL_PHYS_3 0x18000 -#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000) - -#define XPEC_MEM_SIZE 0x4000 -#define XMAC_MEM_SIZE 0x1000 -#define SRAM_MEM_SIZE 0x8000 - -#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT) -#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS) - -#endif diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h deleted file mode 100644 index a7a53f80165..00000000000 --- a/include/asm-arm/arch-netx/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/io.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h deleted file mode 100644 index a487dc6e266..00000000000 --- a/include/asm-arm/arch-netx/irqs.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-arm/arch-netx/irqs.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define NETX_IRQ_VIC_START 0 -#define NETX_IRQ_SOFTINT 0 -#define NETX_IRQ_TIMER0 1 -#define NETX_IRQ_TIMER1 2 -#define NETX_IRQ_TIMER2 3 -#define NETX_IRQ_SYSTIME_NS 4 -#define NETX_IRQ_SYSTIME_S 5 -#define NETX_IRQ_GPIO_15 6 -#define NETX_IRQ_WATCHDOG 7 -#define NETX_IRQ_UART0 8 -#define NETX_IRQ_UART1 9 -#define NETX_IRQ_UART2 10 -#define NETX_IRQ_USB 11 -#define NETX_IRQ_SPI 12 -#define NETX_IRQ_I2C 13 -#define NETX_IRQ_LCD 14 -#define NETX_IRQ_HIF 15 -#define NETX_IRQ_GPIO_0_14 16 -#define NETX_IRQ_XPEC0 17 -#define NETX_IRQ_XPEC1 18 -#define NETX_IRQ_XPEC2 19 -#define NETX_IRQ_XPEC3 20 -#define NETX_IRQ_XPEC(no) (17 + (no)) -#define NETX_IRQ_MSYNC0 21 -#define NETX_IRQ_MSYNC1 22 -#define NETX_IRQ_MSYNC2 23 -#define NETX_IRQ_MSYNC3 24 -#define NETX_IRQ_IRQ_PHY 25 -#define NETX_IRQ_ISO_AREA 26 -/* int 27 is reserved */ -/* int 28 is reserved */ -#define NETX_IRQ_TIMER3 29 -#define NETX_IRQ_TIMER4 30 -/* int 31 is reserved */ - -#define NETX_IRQS 32 - -/* for multiplexed irqs on gpio 0..14 */ -#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x)) -#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14) - -/* Host interface interrupts */ -#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x)) -#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0) -#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1) -#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2) -#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3) -#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4) -#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4) - -#define NR_IRQS (NETX_IRQ_HIF_LAST + 1) diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h deleted file mode 100644 index 6d8d2df3e99..00000000000 --- a/include/asm-arm/arch-netx/memory.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/memory.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x80000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif - diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h deleted file mode 100644 index fc9aa21f360..00000000000 --- a/include/asm-arm/arch-netx/netx-regs.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * include/asm-arm/arch-netx/netx-regs.h - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_NETX_REGS_H -#define __ASM_ARCH_NETX_REGS_H - -/* offsets relative to the beginning of the io space */ -#define NETX_OFS_SYSTEM 0x00000 -#define NETX_OFS_MEMCR 0x00100 -#define NETX_OFS_DPMAS 0x03000 -#define NETX_OFS_GPIO 0x00800 -#define NETX_OFS_PIO 0x00900 -#define NETX_OFS_UART0 0x00a00 -#define NETX_OFS_UART1 0x00a40 -#define NETX_OFS_UART2 0x00a80 -#define NETX_OF_MIIMU 0x00b00 -#define NETX_OFS_SPI 0x00c00 -#define NETX_OFS_I2C 0x00d00 -#define NETX_OFS_SYSTIME 0x01100 -#define NETX_OFS_RTC 0x01200 -#define NETX_OFS_EXTBUS 0x03600 -#define NETX_OFS_LCD 0x04000 -#define NETX_OFS_USB 0x20000 -#define NETX_OFS_XMAC0 0x60000 -#define NETX_OFS_XMAC1 0x61000 -#define NETX_OFS_XMAC2 0x62000 -#define NETX_OFS_XMAC3 0x63000 -#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000) -#define NETX_OFS_PFIFO 0x64000 -#define NETX_OFS_XPEC0 0x70000 -#define NETX_OFS_XPEC1 0x74000 -#define NETX_OFS_XPEC2 0x78000 -#define NETX_OFS_XPEC3 0x7c000 -#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000) -#define NETX_OFS_VIC 0xff000 - -/* physical addresses */ -#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM) -#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR) -#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS) -#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO) -#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO) -#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0) -#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1) -#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2) -#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU) -#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI) -#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C) -#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME) -#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC) -#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS) -#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD) -#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB) -#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0) -#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1) -#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2) -#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3) -#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no)) -#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO) -#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0) -#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1) -#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2) -#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3) -#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no)) -#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC) - -/* virual addresses */ -#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM) -#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR) -#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS) -#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO) -#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO) -#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0) -#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1) -#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2) -#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU) -#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI) -#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C) -#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME) -#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC) -#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS) -#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD) -#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB) -#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0) -#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1) -#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2) -#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3) -#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no)) -#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO) -#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0) -#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1) -#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2) -#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3) -#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no)) -#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC) - -/********************************* - * System functions * - *********************************/ - -/* Registers */ -#define NETX_SYSTEM_REG(ofs) __io(NETX_VA_SYSTEM + (ofs)) -#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00) -#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04) -#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08) - -/* FIXME: Docs are not consistent */ -/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */ -#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c) - -#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10) -#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34) -#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70) -#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200) -#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204) -#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208) -#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c) - -/* Bits */ -#define NETX_SYSTEM_RES_CR_RSTIN (1<<0) -#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1) -#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2) -#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3) -#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4) -#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5) -#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6) -#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7) -#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16) -#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17) -#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18) -#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23) -#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24) -#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25) -#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26) - -#define PHY_CONTROL_RESET (1<<31) -#define PHY_CONTROL_SIM_BYP (1<<30) -#define PHY_CONTROL_CLK_XLATIN (1<<29) -#define PHY_CONTROL_PHY1_EN (1<<21) -#define PHY_CONTROL_PHY1_NP_MSG_CODE -#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17) -#define PHY_CONTROL_PHY1_FIXMODE (1<<16) -#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13) -#define PHY_CONTROL_PHY0_EN (1<<12) -#define PHY_CONTROL_PHY0_NP_MSG_CODE -#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8) -#define PHY_CONTROL_PHY0_FIXMODE (1<<7) -#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4) -#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf) - -#define PHY_MODE_10BASE_T_HALF 0 -#define PHY_MODE_10BASE_T_FULL 1 -#define PHY_MODE_100BASE_TX_FX_FULL 2 -#define PHY_MODE_100BASE_TX_FX_HALF 3 -#define PHY_MODE_100BASE_TX_HALF 4 -#define PHY_MODE_REPEATER 5 -#define PHY_MODE_POWER_DOWN 6 -#define PHY_MODE_ALL 7 - -/* Bits */ -#define VECT_CNTL_ENABLE (1 << 5) - -/******************************* - * GPIO and timer module * - *******************************/ - -/* Registers */ -#define NETX_GPIO_REG(ofs) __io(NETX_VA_GPIO + (ofs)) -#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2)) -#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2)) -#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2)) -#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2)) -#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2)) -#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc) -#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0) -#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4) -#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8) -#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0) - -/* Bits */ -#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0) -#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1) -#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2) -#define NETX_GPIO_CFG_INV (1<<2) -#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5) -#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5) - -#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0) -#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1) -#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2) -#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3) -#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4) -#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5) -#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6) -#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */ - -#define GPIO_BIT(gpio) (1<<(gpio)) -#define COUNTER_BIT(counter) ((1<<16)<<(counter)) - -/******************************* - * PIO * - *******************************/ - -/* Registers */ -#define NETX_PIO_REG(ofs) __io(NETX_VA_PIO + (ofs)) -#define NETX_PIO_INPIO NETX_PIO_REG(0x0) -#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4) -#define NETX_PIO_OEPIO NETX_PIO_REG(0x8) - -/******************************* - * MII Unit * - *******************************/ - -/* Registers */ -#define NETX_MIIMU __io(NETX_VA_MIIMU) - -/* Bits */ -#define MIIMU_SNRDY (1<<0) -#define MIIMU_PREAMBLE (1<<1) -#define MIIMU_OPMODE_WRITE (1<<2) -#define MIIMU_MDC_PERIOD (1<<3) -#define MIIMU_PHY_NRES (1<<4) -#define MIIMU_RTA (1<<5) -#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6) -#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11) -#define MIIMU_DATA(data) (((data) & 0xffff) << 16) - -/******************************* - * xmac / xpec * - *******************************/ - -/* XPEC register offsets relative to NETX_VA_XPEC(no) */ -#define NETX_XPEC_R0_OFS 0x00 -#define NETX_XPEC_R1_OFS 0x04 -#define NETX_XPEC_R2_OFS 0x08 -#define NETX_XPEC_R3_OFS 0x0c -#define NETX_XPEC_R4_OFS 0x10 -#define NETX_XPEC_R5_OFS 0x14 -#define NETX_XPEC_R6_OFS 0x18 -#define NETX_XPEC_R7_OFS 0x1c -#define NETX_XPEC_RANGE01_OFS 0x20 -#define NETX_XPEC_RANGE23_OFS 0x24 -#define NETX_XPEC_RANGE45_OFS 0x28 -#define NETX_XPEC_RANGE67_OFS 0x2c -#define NETX_XPEC_PC_OFS 0x48 -#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2)) -#define NETX_XPEC_IRQ_OFS 0x8c -#define NETX_XPEC_SYSTIME_NS_OFS 0x90 -#define NETX_XPEC_FIFO_DATA_OFS 0x94 -#define NETX_XPEC_SYSTIME_S_OFS 0x98 -#define NETX_XPEC_ADC_OFS 0x9c -#define NETX_XPEC_URX_COUNT_OFS 0x40 -#define NETX_XPEC_UTX_COUNT_OFS 0x44 -#define NETX_XPEC_PC_OFS 0x48 -#define NETX_XPEC_ZERO_OFS 0x4c -#define NETX_XPEC_STATCFG_OFS 0x50 -#define NETX_XPEC_EC_MASKA_OFS 0x54 -#define NETX_XPEC_EC_MASKB_OFS 0x58 -#define NETX_XPEC_EC_MASK0_OFS 0x5c -#define NETX_XPEC_EC_MASK8_OFS 0x7c -#define NETX_XPEC_EC_MASK9_OFS 0x80 -#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100 -#define NETX_XPEC_RAM_START_OFS 0x2000 - -/* Bits */ -#define XPU_HOLD_PC (1<<0) - -/* XMAC register offsets relative to NETX_VA_XMAC(no) */ -#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000 -#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff -#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400 -#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff -#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00 -#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04 -#define NETX_XMAC_STATUS_SHARED0_OFS 0x840 -#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844 -#define NETX_XMAC_STATUS_SHARED1_OFS 0x848 -#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c -#define NETX_XMAC_STATUS_SHARED2_OFS 0x850 -#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854 -#define NETX_XMAC_STATUS_SHARED3_OFS 0x858 -#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c - -#define RPU_HOLD_PC (1<<15) -#define TPU_HOLD_PC (1<<15) - -/******************************* - * Pointer FIFO * - *******************************/ - -/* Registers */ -#define NETX_PFIFO_REG(ofs) __io(NETX_VA_PFIFO + (ofs)) -#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2)) -#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2)) -#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100) -#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104) -#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108) -#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c) -#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110) -#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2)) -#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2)) - -/******************************* - * Dual Port Memory * - *******************************/ - -/* Registers */ -#define NETX_DPMAS_REG(ofs) __io(NETX_VA_DPMAS + (ofs)) -#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8) -#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0) -#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0) -#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608) -#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c) -#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs)) -#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */ -#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624) -#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628) -#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */ -#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634) -#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638) - -/* Bits */ -#define NETX_DPMAS_INT_EN_GLB_EN (1<<31) -#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30) -#define NETX_DPMAS_INT_EN_WDG (1<<29) -#define NETX_DPMAS_INT_EN_PIO72 (1<<28) -#define NETX_DPMAS_INT_EN_PIO47 (1<<27) -#define NETX_DPMAS_INT_EN_PIO40 (1<<26) -#define NETX_DPMAS_INT_EN_PIO36 (1<<25) -#define NETX_DPMAS_INT_EN_PIO35 (1<<24) - -#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28) -#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28) -#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28) -#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28) -#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14) - -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30) - -#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29) -#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26) -#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23) -#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20) -#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17) -#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12) -#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7) -#define NETX_EXT_CONFIG_WAIT_POL (1<<6) -#define NETX_EXT_CONFIG_WAIT_EN (1<<5) -#define NETX_EXT_CONFIG_NRD_MODE (1<<4) -#define NETX_EXT_CONFIG_DS_MODE (1<<3) -#define NETX_EXT_CONFIG_NWR_MODE (1<<2) -#define NETX_EXT_CONFIG_16BIT (1<<1) -#define NETX_EXT_CONFIG_CS_ENABLE (1<<0) - -#define NETX_DPMAS_IO_MODE0_WRL (1<<13) -#define NETX_DPMAS_IO_MODE0_WAIT (1<<14) -#define NETX_DPMAS_IO_MODE0_READY (1<<15) -#define NETX_DPMAS_IO_MODE0_CS0 (1<<19) -#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20) - -#define NETX_DPMAS_IO_MODE1_CS2 (1<<15) -#define NETX_DPMAS_IO_MODE1_CS1 (1<<16) -#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30) - -/******************************* - * I2C * - *******************************/ -#define NETX_I2C_REG(ofs) __io(NETX_VA_I2C, (ofs)) -#define NETX_I2C_CTRL NETX_I2C_REG(0x0) -#define NETX_I2C_DATA NETX_I2C_REG(0x4) - -#endif /* __ASM_ARCH_NETX_REGS_H */ diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h deleted file mode 100644 index 7a80c26178a..00000000000 --- a/include/asm-arm/arch-netx/param.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/param.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h deleted file mode 100644 index 4af2ee4a32c..00000000000 --- a/include/asm-arm/arch-netx/pfifo.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * include/asm-arm/arch-netx/pfifo.h - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#ifndef ASM_ARCH_PFIFO_H -#define ASM_ARCH_PFIFO_H - -static inline int pfifo_push(int no, unsigned int pointer) -{ - writel(pointer, NETX_PFIFO_BASE(no)); - return 0; -} - -static inline unsigned int pfifo_pop(int no) -{ - return readl(NETX_PFIFO_BASE(no)); -} - -static inline int pfifo_fill_level(int no) -{ - - return readl(NETX_PFIFO_FILL_LEVEL(no)); -} - -static inline int pfifo_full(int no) -{ - return readl(NETX_PFIFO_FULL) & (1<, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include "netx-regs.h" - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, - NETX_SYSTEM_RES_CR); -} - -#endif - diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h deleted file mode 100644 index 7fdb42da0b4..00000000000 --- a/include/asm-arm/arch-netx/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-netx/timex.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 100000000 diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h deleted file mode 100644 index f8943454710..00000000000 --- a/include/asm-arm/arch-netx/uncompress.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-arm/arch-netx/uncompress.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -#define REG(x) (*(volatile unsigned long *)(x)) - -#define UART1_BASE 0x100a00 -#define UART2_BASE 0x100a80 - -#define UART_DR 0x0 - -#define UART_CR 0x14 -#define CR_UART_EN (1<<0) - -#define UART_FR 0x18 -#define FR_BUSY (1<<3) -#define FR_TXFF (1<<5) - -static void putc(char c) -{ - unsigned long base; - - if (REG(UART1_BASE + UART_CR) & CR_UART_EN) - base = UART1_BASE; - else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) - base = UART2_BASE; - else - return; - - while (REG(base + UART_FR) & FR_TXFF); - REG(base + UART_DR) = c; -} - -static inline void flush(void) -{ - unsigned long base; - - if (REG(UART1_BASE + UART_CR) & CR_UART_EN) - base = UART1_BASE; - else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) - base = UART2_BASE; - else - return; - - while (REG(base + UART_FR) & FR_BUSY); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h deleted file mode 100644 index da2da5a595d..00000000000 --- a/include/asm-arm/arch-netx/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/vmalloc.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h deleted file mode 100644 index 659af19512a..00000000000 --- a/include/asm-arm/arch-netx/xc.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/xc.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_XC_H -#define __ASM_ARCH_XC_H - -struct xc { - int no; - unsigned int type; - unsigned int version; - void __iomem *xpec_base; - void __iomem *xmac_base; - void __iomem *sram_base; - int irq; - struct device *dev; -}; - -int xc_reset(struct xc *x); -int xc_stop(struct xc* x); -int xc_start(struct xc *x); -int xc_running(struct xc *x); -int xc_request_firmware(struct xc* x); -struct xc* request_xc(int xcno, struct device *dev); -void free_xc(struct xc *x); - -#endif /* __ASM_ARCH_XC_H */ diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h deleted file mode 100644 index e57443bdbbd..00000000000 --- a/include/asm-arm/arch-ns9xxx/board.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/board.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include - -#define board_is_a9m9750dev() (0 \ - || machine_is_cc9p9360dev() \ - || machine_is_cc9p9750dev() \ - ) - -#define board_is_a9mvali() (0 \ - || machine_is_cc9p9360val() \ - || machine_is_cc9p9750val() \ - ) - -#define board_is_jscc9p9210() (0 \ - || machine_is_cc9p9210js() \ - ) - -#define board_is_jscc9p9215() (0 \ - || machine_is_cc9p9215js() \ - ) - -#define board_is_jscc9p9360() (0 \ - || machine_is_cc9p9360js() \ - ) - -#define board_is_uncbas() (0 \ - || machine_is_cc7ucamry() \ - ) - -#endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S deleted file mode 100644 index c78908d7203..00000000000 --- a/include/asm-arm/arch-ns9xxx/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/debug-macro.S - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0) - ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h deleted file mode 100644 index a67cbbe009c..00000000000 --- a/include/asm-arm/arch-ns9xxx/dma.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/dma.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#endif /* ifndef __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S deleted file mode 100644 index e9d9449d300..00000000000 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/entry-macro.S - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include -#include - - .macro get_irqnr_preamble, base, tmp - ldr \base, =SYS_ISRADDR - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)] - cmp \irqstat, #0 - ldrne \irqnr, [\base] - .endm - - .macro disable_fiq - .endm diff --git a/include/asm-arm/arch-ns9xxx/gpio.h b/include/asm-arm/arch-ns9xxx/gpio.h deleted file mode 100644 index adbca08583c..00000000000 --- a/include/asm-arm/arch-ns9xxx/gpio.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/gpio.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. -*/ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include - -int gpio_request(unsigned gpio, const char *label); - -void gpio_free(unsigned gpio); - -int ns9xxx_gpio_configure(unsigned gpio, int inv, int func); - -int gpio_direction_input(unsigned gpio); - -int gpio_direction_output(unsigned gpio, int value); - -int gpio_get_value(unsigned gpio); - -void gpio_set_value(unsigned gpio, int value); - -/* - * ns9xxx can use gpio pins to trigger an irq, but it's not generic - * enough to be supported by the gpio_to_irq/irq_to_gpio interface - */ -static inline int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -/* get the cansleep() stubs */ -#include - -#endif /* ifndef __ASM_ARCH_GPIO_H */ diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h deleted file mode 100644 index 0dca11ce21f..00000000000 --- a/include/asm-arm/arch-ns9xxx/hardware.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/hardware.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* - * NetSilicon NS9xxx internal mapping: - * - * physical <--> virtual - * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff - * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff - */ -#define io_p2v(x) (0xf0000000 \ - + (((x) & 0xf0000000) >> 4) \ - + ((x) & 0x00ffffff)) - -#define io_v2p(x) ((((x) & 0x0f000000) << 4) \ - + ((x) & 0x00ffffff)) - -#define __REGSHIFT(mask) ((mask) & (-(mask))) - -#define __REGBIT(bit) ((u32)1 << (bit)) -#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit)) -#define __REGVAL(mask, value) (((value) * __REGSHIFT(mask)) & (mask)) - -#ifndef __ASSEMBLY__ - -# define __REG(x) ((void __iomem __force *)io_p2v((x))) -# define __REG2(x, y) ((void __iomem __force *)(io_p2v((x)) + 4 * (y))) - -# define __REGSET(var, field, value) \ - ((var) = (((var) & ~((field) & ~(value))) | (value))) - -# define REGSET(var, reg, field, value) \ - __REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value) - -# define REGSET_IDX(var, reg, field, idx, value) \ - __REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx))) - -# define REGSETIM(var, reg, field, value) \ - __REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value))) - -# define REGSETIM_IDX(var, reg, field, idx, value) \ - __REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value))) - -# define __REGGET(var, field) \ - (((var) & (field))) - -# define REGGET(var, reg, field) \ - __REGGET(var, reg ## _ ## field) - -# define REGGET_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) - -# define REGGETIM(var, reg, field) \ - __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field) - -# define REGGETIM_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) / \ - __REGSHIFT(reg ## _ ## field((idx))) - -#else - -# define __REG(x) io_p2v(x) -# define __REG2(x, y) io_p2v((x) + 4 * (y)) - -#endif - -#endif /* ifndef __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h deleted file mode 100644 index 6f82d28af12..00000000000 --- a/include/asm-arm/arch-ns9xxx/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/io.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff /* XXX */ - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) -#define __mem_isa(a) (IO_BASE + (a)) - -#endif /* ifndef __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h deleted file mode 100644 index e83d48ec42c..00000000000 --- a/include/asm-arm/arch-ns9xxx/irqs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/irqs.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* NetSilicon 9360 */ -#define IRQ_NS9XXX_WATCHDOG 0 -#define IRQ_NS9XXX_AHBBUSERR 1 -#define IRQ_NS9360_BBUSAGG 2 -/* irq 3 is reserved for NS9360 */ -#define IRQ_NS9XXX_ETHRX 4 -#define IRQ_NS9XXX_ETHTX 5 -#define IRQ_NS9XXX_ETHPHY 6 -#define IRQ_NS9360_LCD 7 -#define IRQ_NS9360_SERBRX 8 -#define IRQ_NS9360_SERBTX 9 -#define IRQ_NS9360_SERARX 10 -#define IRQ_NS9360_SERATX 11 -#define IRQ_NS9360_SERCRX 12 -#define IRQ_NS9360_SERCTX 13 -#define IRQ_NS9360_I2C 14 -#define IRQ_NS9360_BBUSDMA 15 -#define IRQ_NS9360_TIMER0 16 -#define IRQ_NS9360_TIMER1 17 -#define IRQ_NS9360_TIMER2 18 -#define IRQ_NS9360_TIMER3 19 -#define IRQ_NS9360_TIMER4 20 -#define IRQ_NS9360_TIMER5 21 -#define IRQ_NS9360_TIMER6 22 -#define IRQ_NS9360_TIMER7 23 -#define IRQ_NS9360_RTC 24 -#define IRQ_NS9360_USBHOST 25 -#define IRQ_NS9360_USBDEVICE 26 -#define IRQ_NS9360_IEEE1284 27 -#define IRQ_NS9XXX_EXT0 28 -#define IRQ_NS9XXX_EXT1 29 -#define IRQ_NS9XXX_EXT2 30 -#define IRQ_NS9XXX_EXT3 31 - -#define BBUS_IRQ(irq) (32 + irq) - -#define IRQ_BBUS_DMA BBUS_IRQ(0) -#define IRQ_BBUS_SERBRX BBUS_IRQ(2) -#define IRQ_BBUS_SERBTX BBUS_IRQ(3) -#define IRQ_BBUS_SERARX BBUS_IRQ(4) -#define IRQ_BBUS_SERATX BBUS_IRQ(5) -#define IRQ_BBUS_SERCRX BBUS_IRQ(6) -#define IRQ_BBUS_SERCTX BBUS_IRQ(7) -#define IRQ_BBUS_SERDRX BBUS_IRQ(8) -#define IRQ_BBUS_SERDTX BBUS_IRQ(9) -#define IRQ_BBUS_I2C BBUS_IRQ(10) -#define IRQ_BBUS_1284 BBUS_IRQ(11) -#define IRQ_BBUS_UTIL BBUS_IRQ(12) -#define IRQ_BBUS_RTC BBUS_IRQ(13) -#define IRQ_BBUS_USBHST BBUS_IRQ(14) -#define IRQ_BBUS_USBDEV BBUS_IRQ(15) -#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24) -#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25) - -/* - * these Interrupts are specific for the a9m9750dev board. - * They are generated by an FPGA that interrupts the CPU on - * IRQ_NS9360_EXT2 - */ -#define FPGA_IRQ(irq) (64 + irq) - -#define IRQ_FPGA_UARTA FPGA_IRQ(0) -#define IRQ_FPGA_UARTB FPGA_IRQ(1) -#define IRQ_FPGA_UARTC FPGA_IRQ(2) -#define IRQ_FPGA_UARTD FPGA_IRQ(3) -#define IRQ_FPGA_TOUCH FPGA_IRQ(4) -#define IRQ_FPGA_CF FPGA_IRQ(5) -#define IRQ_FPGA_CAN0 FPGA_IRQ(6) -#define IRQ_FPGA_CAN1 FPGA_IRQ(7) - -#define NR_IRQS 72 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h deleted file mode 100644 index ce1343e593e..00000000000 --- a/include/asm-arm/arch-ns9xxx/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/memory.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. -*/ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* x in [0..3] */ -#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28) - -#define NS9XXX_CS0STAT_LENGTH UL(0x1000) -#define NS9XXX_CS1STAT_LENGTH UL(0x1000) -#define NS9XXX_CS2STAT_LENGTH UL(0x1000) -#define NS9XXX_CS3STAT_LENGTH UL(0x1000) - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h deleted file mode 100644 index ac08a31111e..00000000000 --- a/include/asm-arm/arch-ns9xxx/module.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/module.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_MODULE_H -#define __ASM_ARCH_MODULE_H - -#include - -#define module_is_cc7ucamry() (0 \ - || machine_is_cc7ucamry() \ - ) - -#define module_is_cc9c() (0 \ - || machine_is_cc9c() \ - ) - -#define module_is_cc9p9210() (0 \ - || machine_is_cc9p9210() \ - || machine_is_cc9p9210js() \ - ) - -#define module_is_cc9p9215() (0 \ - || machine_is_cc9p9215() \ - || machine_is_cc9p9215js() \ - ) - -#define module_is_cc9p9360() (0 \ - || machine_is_a9m9360() \ - || machine_is_cc9p9360dev() \ - || machine_is_cc9p9360js() \ - || machine_is_cc9p9360val() \ - ) - -#define module_is_cc9p9750() (0 \ - || machine_is_a9m9750() \ - || machine_is_cc9p9750dev() \ - || machine_is_cc9p9750js() \ - || machine_is_cc9p9750val() \ - ) - -#define module_is_ccw9c() (0 \ - || machine_is_ccw9c() \ - ) - -#define module_is_inc20otter() (0 \ - || machine_is_inc20otter() \ - ) - -#define module_is_otter() (0 \ - || machine_is_otter() \ - ) - -#endif /* ifndef __ASM_ARCH_MODULE_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h deleted file mode 100644 index f3aa6c50dbe..00000000000 --- a/include/asm-arm/arch-ns9xxx/processor-ns9360.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/processor-ns9360.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_PROCESSORNS9360_H -#define __ASM_ARCH_PROCESSORNS9360_H - -#include - -void ns9360_reset(char mode); - -unsigned long ns9360_systemclock(void) __attribute__((const)); - -static inline unsigned long ns9360_cpuclock(void) __attribute__((const)); -static inline unsigned long ns9360_cpuclock(void) -{ - return ns9360_systemclock() / 2; -} - -void __init ns9360_map_io(void); - -extern struct sys_timer ns9360_timer; - -int ns9360_gpio_configure(unsigned gpio, int inv, int func); - -#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h deleted file mode 100644 index 3137e5ba01a..00000000000 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/processor.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_PROCESSOR_H -#define __ASM_ARCH_PROCESSOR_H - -#include - -#define processor_is_ns9210() (0 \ - || module_is_cc7ucamry() \ - || module_is_cc9p9210() \ - || module_is_inc20otter() \ - || module_is_otter() \ - ) - -#define processor_is_ns9215() (0 \ - || module_is_cc9p9215() \ - ) - -#define processor_is_ns9360() (0 \ - || module_is_cc9p9360() \ - || module_is_cc9c() \ - || module_is_ccw9c() \ - ) - -#define processor_is_ns9750() (0 \ - || module_is_cc9p9750() \ - ) - -#define processor_is_ns921x() (0 \ - || processor_is_ns9210() \ - || processor_is_ns9215() \ - ) - -#endif /* ifndef __ASM_ARCH_PROCESSOR_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h deleted file mode 100644 index b41b31d04f0..00000000000 --- a/include/asm-arm/arch-ns9xxx/regs-bbu.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-bbu.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSBBU_H -#define __ASM_ARCH_REGSBBU_H - -#include - -/* BBus Utility */ - -/* GPIO Configuration Registers block 1 */ -/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is - * at 0 for each block. That is, BBU_GCONFb1(0) is GPIO Configuration Register - * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */ -#define BBU_GCONFb1(x) __REG2(0x90600010, (x)) -#define BBU_GCONFb2(x) __REG2(0x90600100, (x)) - -#define BBU_GCONFx_DIR(m) __REGBIT(3 + (((m) & 7) << 2)) -#define BBU_GCONFx_DIR_INPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 0) -#define BBU_GCONFx_DIR_OUTPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 1) -#define BBU_GCONFx_INV(m) __REGBIT(2 + (((m) & 7) << 2)) -#define BBU_GCONFx_INV_NO(m) __REGVAL(BBU_GCONFx_INV(m), 0) -#define BBU_GCONFx_INV_YES(m) __REGVAL(BBU_GCONFx_INV(m), 1) -#define BBU_GCONFx_FUNC(m) __REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2) -#define BBU_GCONFx_FUNC_0(m) __REGVAL(BBU_GCONFx_FUNC(m), 0) -#define BBU_GCONFx_FUNC_1(m) __REGVAL(BBU_GCONFx_FUNC(m), 1) -#define BBU_GCONFx_FUNC_2(m) __REGVAL(BBU_GCONFx_FUNC(m), 2) -#define BBU_GCONFx_FUNC_3(m) __REGVAL(BBU_GCONFx_FUNC(m), 3) - -#define BBU_GCTRL1 __REG(0x90600030) -#define BBU_GCTRL2 __REG(0x90600034) -#define BBU_GCTRL3 __REG(0x90600120) - -#define BBU_GSTAT1 __REG(0x90600040) -#define BBU_GSTAT2 __REG(0x90600044) -#define BBU_GSTAT3 __REG(0x90600130) - -#endif /* ifndef __ASM_ARCH_REGSBBU_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h deleted file mode 100644 index 6bf1ed2ac3d..00000000000 --- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSBOARDA9M9750_H -#define __ASM_ARCH_REGSBOARDA9M9750_H - -#include - -#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0)) -#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08) -#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10) -#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18) - -#define FPGA_IER __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50) -#define FPGA_ISR __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60) - -#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h deleted file mode 100644 index 023f7be6f4c..00000000000 --- a/include/asm-arm/arch-ns9xxx/regs-mem.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-mem.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSMEM_H -#define __ASM_ARCH_REGSMEM_H - -#include - -/* Memory Module */ - -/* Control register */ -#define MEM_CTRL __REG(0xa0700000) - -/* Status register */ -#define MEM_STAT __REG(0xa0700004) - -/* Configuration register */ -#define MEM_CONF __REG(0xa0700008) - -/* Dynamic Memory Control register */ -#define MEM_DMCTRL __REG(0xa0700020) - -/* Dynamic Memory Refresh Timer */ -#define MEM_DMRT __REG(0xa0700024) - -/* Dynamic Memory Read Configuration register */ -#define MEM_DMRC __REG(0xa0700028) - -/* Dynamic Memory Precharge Command Period (tRP) */ -#define MEM_DMPCP __REG(0xa0700030) - -/* Dynamic Memory Active to Precharge Command Period (tRAS) */ -#define MEM_DMAPCP __REG(0xa0700034) - -/* Dynamic Memory Self-Refresh Exit Time (tSREX) */ -#define MEM_DMSRET __REG(0xa0700038) - -/* Dynamic Memory Last Data Out to Active Time (tAPR) */ -#define MEM_DMLDOAT __REG(0xa070003c) - -/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */ -#define MEM_DMDIACT __REG(0xa0700040) - -/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */ -#define MEM_DMWRT __REG(0xa0700044) - -/* Dynamic Memory Active to Active Command Period (tRC) */ -#define MEM_DMAACP __REG(0xa0700048) - -/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */ -#define MEM_DMARP __REG(0xa070004c) - -/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */ -#define MEM_DMESRAC __REG(0xa0700050) - -/* Dynamic Memory Active Bank A to Active B Time (tRRD) */ -#define MEM_DMABAABT __REG(0xa0700054) - -/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */ -#define MEM_DMLMACT __REG(0xa0700058) - -/* Static Memory Extended Wait */ -#define MEM_SMEW __REG(0xa0700080) - -/* Dynamic Memory Configuration Register x */ -#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3) - -/* Dynamic Memory RAS and CAS Delay x */ -#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3) - -/* Static Memory Configuration Register x */ -#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3) - -/* Static Memory Configuration Register x: Write protect */ -#define MEM_SMC_PSMC __REGBIT(20) -#define MEM_SMC_PSMC_OFF __REGVAL(MEM_SMC_PSMC, 0) -#define MEM_SMC_PSMC_ON __REGVAL(MEM_SMC_PSMC, 1) - -/* Static Memory Configuration Register x: Buffer enable */ -#define MEM_SMC_BSMC __REGBIT(19) -#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0) -#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1) - -/* Static Memory Configuration Register x: Extended Wait */ -#define MEM_SMC_EW __REGBIT(8) -#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0) -#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1) - -/* Static Memory Configuration Register x: Byte lane state */ -#define MEM_SMC_PB __REGBIT(7) -#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0) -#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1) - -/* Static Memory Configuration Register x: Chip select polarity */ -#define MEM_SMC_PC __REGBIT(6) -#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0) -#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1) - -/* static memory configuration register x: page mode*/ -#define MEM_SMC_PM __REGBIT(3) -#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0) -#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1) - -/* static memory configuration register x: Memory width */ -#define MEM_SMC_MW __REGBITS(1, 0) -#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0) -#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1) -#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2) - -/* Static Memory Write Enable Delay x */ -#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3) - -/* Static Memory Output Enable Delay x */ -#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3) - -/* Static Memory Read Delay x */ -#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3) - -/* Static Memory Page Mode Read Delay 0 */ -#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3) - -/* Static Memory Write Delay */ -#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3) - -/* Static Memory Turn Round Delay x */ -#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3) - -#endif /* ifndef __ASM_ARCH_REGSMEM_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h deleted file mode 100644 index bc82d5ec2a8..00000000000 --- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-sys-common.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_REGSSYSCOMMON_H -#define __ASM_ARCH_REGSSYSCOMMON_H -#include - -/* Interrupt Vector Address Register Level x */ -#define SYS_IVA(x) __REG2(0xa09000c4, (x)) - -/* Interrupt Configuration registers */ -#define SYS_IC(x) __REG2(0xa0900144, (x)) - -/* ISRADDR */ -#define SYS_ISRADDR __REG(0xa0900164) - -/* Interrupt Status Active */ -#define SYS_ISA __REG(0xa0900168) - -/* Interrupt Status Raw */ -#define SYS_ISR __REG(0xa090016c) - -#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h deleted file mode 100644 index 821275a88cb..00000000000 --- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSSYSNS9360_H -#define __ASM_ARCH_REGSSYSNS9360_H - -#include - -/* System Control Module */ - -/* AHB Arbiter Gen Configuration */ -#define SYS_AHBAGENCONF __REG(0xa0900000) - -/* BRC */ -#define SYS_BRC(x) __REG2(0xa0900004, (x)) - -/* Timer x Reload Count register */ -#define SYS_TRC(x) __REG2(0xa0900044, (x)) - -/* Timer x Read register */ -#define SYS_TR(x) __REG2(0xa0900084, (x)) - -/* Timer Interrupt Status register */ -#define SYS_TIS __REG(0xa0900170) - -/* PLL Configuration register */ -#define SYS_PLL __REG(0xa0900188) - -/* PLL FS status */ -#define SYS_PLL_FS __REGBITS(24, 23) - -/* PLL ND status */ -#define SYS_PLL_ND __REGBITS(20, 16) - -/* PLL Configuration register: PLL SW change */ -#define SYS_PLL_SWC __REGBIT(15) -#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0) -#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1) - -/* Timer x Control register */ -#define SYS_TC(x) __REG2(0xa0900190, (x)) - -/* Timer x Control register: Timer enable */ -#define SYS_TCx_TEN __REGBIT(15) -#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0) -#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1) - -/* Timer x Control register: CPU debug mode */ -#define SYS_TCx_TDBG __REGBIT(10) -#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0) -#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1) - -/* Timer x Control register: Interrupt clear */ -#define SYS_TCx_INTC __REGBIT(9) -#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0) -#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1) - -/* Timer x Control register: Timer clock select */ -#define SYS_TCx_TLCS __REGBITS(8, 6) -#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */ -#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */ -#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */ -#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */ -#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */ -#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */ -#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */ -#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7) - -/* Timer x Control register: Timer mode */ -#define SYS_TCx_TM __REGBITS(5, 4) -#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */ -#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */ -#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */ -#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */ - -/* Timer x Control register: Interrupt select */ -#define SYS_TCx_INTS __REGBIT(3) -#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0) -#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1) - -/* Timer x Control register: Up/down select */ -#define SYS_TCx_UDS __REGBIT(2) -#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0) -#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1) - -/* Timer x Control register: 32- or 16-bit timer */ -#define SYS_TCx_TSZ __REGBIT(1) -#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0) -#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1) - -/* Timer x Control register: Reload enable */ -#define SYS_TCx_REN __REGBIT(0) -#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0) -#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1) - -/* System Memory Chip Select x Dynamic Memory Base */ -#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1) - -/* System Memory Chip Select x Dynamic Memory Mask */ -#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1) - -/* System Memory Chip Select x Static Memory Base */ -#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1) - -/* System Memory Chip Select x Static Memory Base: Chip select x base */ -#define SYS_SMCSSMB_CSxB __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask */ -#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1) - -/* System Memory Chip Select x Static Memory Mask: Chip select x mask */ -#define SYS_SMCSSMM_CSxM __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask: Chip select x enable */ -#define SYS_SMCSSMM_CSEx __REGBIT(0) -#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0) -#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1) - -/* General purpose, user-defined ID register */ -#define SYS_GENID __REG(0xa0900210) - -/* External Interrupt x Control register */ -#define SYS_EIC(x) __REG2(0xa0900214, (x)) - -/* External Interrupt x Control register: Status */ -#define SYS_EIC_STS __REGBIT(3) - -/* External Interrupt x Control register: Clear */ -#define SYS_EIC_CLR __REGBIT(2) - -/* External Interrupt x Control register: Polarity */ -#define SYS_EIC_PLTY __REGBIT(1) -#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0) -#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1) - -/* External Interrupt x Control register: Level edge */ -#define SYS_EIC_LVEDG __REGBIT(0) -#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) -#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) - -#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h deleted file mode 100644 index c2941684d66..00000000000 --- a/include/asm-arm/arch-ns9xxx/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/system.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ -#ifdef CONFIG_PROCESSOR_NS9360 - if (processor_is_ns9360()) - ns9360_reset(mode); - else -#endif - BUG(); - - BUG(); -} - -#endif /* ifndef __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h deleted file mode 100644 index f776cbd2622..00000000000 --- a/include/asm-arm/arch-ns9xxx/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/timex.h - * - * Copyright (C) 2005-2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h. - * See there for an explanation. - */ -#define CLOCK_TICK_RATE 12000000 - -#endif /* ifndef __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h deleted file mode 100644 index 71066baceab..00000000000 --- a/include/asm-arm/arch-ns9xxx/uncompress.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/uncompress.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include - -#define __REG(x) ((void __iomem __force *)(x)) - -static void putc_dummy(char c, void __iomem *base) -{ - /* nothing */ -} - -static void putc_ns9360(char c, void __iomem *base) -{ - static int t = 0x10000; - do { - if (t) - --t; - - if (__raw_readl(base + 8) & (1 << 3)) { - __raw_writeb(c, base + 16); - t = 0x10000; - break; - } - } while (t); -} - -static void putc_a9m9750dev(char c, void __iomem *base) -{ - static int t = 0x10000; - do { - if (t) - --t; - - if (__raw_readb(base + 5) & (1 << 5)) { - __raw_writeb(c, base); - t = 0x10000; - break; - } - } while (t); - -} - -static void putc_ns921x(char c, void __iomem *base) -{ - static int t = 0x10000; - do { - if (t) - --t; - - if (!(__raw_readl(base) & (1 << 11))) { - __raw_writeb(c, base + 0x0028); - t = 0x10000; - break; - } - } while (t); -} - -#define MSCS __REG(0xA0900184) - -#define NS9360_UARTA __REG(0x90200040) -#define NS9360_UARTB __REG(0x90200000) -#define NS9360_UARTC __REG(0x90300000) -#define NS9360_UARTD __REG(0x90300040) - -#define NS9360_UART_ENABLED(base) \ - (__raw_readl(NS9360_UARTA) & (1 << 31)) - -#define A9M9750DEV_UARTA __REG(0x40000000) - -#define NS921XSYS_CLOCK __REG(0xa090017c) -#define NS921X_UARTA __REG(0x90010000) -#define NS921X_UARTB __REG(0x90018000) -#define NS921X_UARTC __REG(0x90020000) -#define NS921X_UARTD __REG(0x90028000) - -#define NS921X_UART_ENABLED(base) \ - (__raw_readl((base) + 0x1000) & (1 << 29)) - -static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base) -{ - if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) { - /* ns9360 or ns9750 */ - if (NS9360_UART_ENABLED(NS9360_UARTA)) { - *putc = putc_ns9360; - *base = NS9360_UARTA; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTB)) { - *putc = putc_ns9360; - *base = NS9360_UARTB; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTC)) { - *putc = putc_ns9360; - *base = NS9360_UARTC; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTD)) { - *putc = putc_ns9360; - *base = NS9360_UARTD; - return; - } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) { - *putc = putc_a9m9750dev; - *base = A9M9750DEV_UARTA; - return; - } - } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) { - /* ns921x */ - u32 clock = __raw_readl(NS921XSYS_CLOCK); - - if ((clock & (1 << 1)) && - NS921X_UART_ENABLED(NS921X_UARTA)) { - *putc = putc_ns921x; - *base = NS921X_UARTA; - return; - } else if ((clock & (1 << 2)) && - NS921X_UART_ENABLED(NS921X_UARTB)) { - *putc = putc_ns921x; - *base = NS921X_UARTB; - return; - } else if ((clock & (1 << 3)) && - NS921X_UART_ENABLED(NS921X_UARTC)) { - *putc = putc_ns921x; - *base = NS921X_UARTC; - return; - } else if ((clock & (1 << 4)) && - NS921X_UART_ENABLED(NS921X_UARTD)) { - *putc = putc_ns921x; - *base = NS921X_UARTD; - return; - } - } - - *putc = putc_dummy; -} - -void (*myputc)(char, void __iomem *); -void __iomem *base; - -static void putc(char c) -{ - myputc(c, base); -} - -static void arch_decomp_setup(void) -{ - autodetect(&myputc, &base); -} -#define arch_decomp_wdog() - -static void flush(void) -{ - /* nothing */ -} - -#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h deleted file mode 100644 index 2f3cb6f6be2..00000000000 --- a/include/asm-arm/arch-ns9xxx/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/vmalloc.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xf0000000) - -#endif /* ifndef __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h deleted file mode 100644 index aec2d656362..00000000000 --- a/include/asm-arm/arch-omap/aic23.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/aic23.h - * - * Hardware definitions for TI TLV320AIC23 audio codec - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_AIC23_H -#define __ASM_ARCH_AIC23_H - -// Codec TLV320AIC23 -#define LEFT_LINE_VOLUME_ADDR 0x00 -#define RIGHT_LINE_VOLUME_ADDR 0x01 -#define LEFT_CHANNEL_VOLUME_ADDR 0x02 -#define RIGHT_CHANNEL_VOLUME_ADDR 0x03 -#define ANALOG_AUDIO_CONTROL_ADDR 0x04 -#define DIGITAL_AUDIO_CONTROL_ADDR 0x05 -#define POWER_DOWN_CONTROL_ADDR 0x06 -#define DIGITAL_AUDIO_FORMAT_ADDR 0x07 -#define SAMPLE_RATE_CONTROL_ADDR 0x08 -#define DIGITAL_INTERFACE_ACT_ADDR 0x09 -#define RESET_CONTROL_ADDR 0x0F - -// Left (right) line input volume control register -#define LRS_ENABLED 0x0100 -#define LIM_MUTED 0x0080 -#define LIV_DEFAULT 0x0017 -#define LIV_MAX 0x001f -#define LIV_MIN 0x0000 - -// Left (right) channel headphone volume control register -#define LZC_ON 0x0080 -#define LHV_DEFAULT 0x0079 -#define LHV_MAX 0x007f -#define LHV_MIN 0x0000 - -// Analog audio path control register -#define STA_REG(x) ((x)<<6) -#define STE_ENABLED 0x0020 -#define DAC_SELECTED 0x0010 -#define BYPASS_ON 0x0008 -#define INSEL_MIC 0x0004 -#define MICM_MUTED 0x0002 -#define MICB_20DB 0x0001 - -// Digital audio path control register -#define DACM_MUTE 0x0008 -#define DEEMP_32K 0x0002 -#define DEEMP_44K 0x0004 -#define DEEMP_48K 0x0006 -#define ADCHP_ON 0x0001 - -// Power control down register -#define DEVICE_POWER_OFF 0x0080 -#define CLK_OFF 0x0040 -#define OSC_OFF 0x0020 -#define OUT_OFF 0x0010 -#define DAC_OFF 0x0008 -#define ADC_OFF 0x0004 -#define MIC_OFF 0x0002 -#define LINE_OFF 0x0001 - -// Digital audio interface register -#define MS_MASTER 0x0040 -#define LRSWAP_ON 0x0020 -#define LRP_ON 0x0010 -#define IWL_16 0x0000 -#define IWL_20 0x0004 -#define IWL_24 0x0008 -#define IWL_32 0x000C -#define FOR_I2S 0x0002 -#define FOR_DSP 0x0003 - -// Sample rate control register -#define CLKOUT_HALF 0x0080 -#define CLKIN_HALF 0x0040 -#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode -#define USB_CLK_ON 0x0001 -#define SR_MASK 0xf -#define CLKOUT_SHIFT 7 -#define CLKIN_SHIFT 6 -#define SR_SHIFT 2 -#define BOSR_SHIFT 1 - -// Digital interface register -#define ACT_ON 0x0001 - -#define TLV320AIC23ID1 (0x1a) // cs low -#define TLV320AIC23ID2 (0x1b) // cs high - -void aic23_power_up(void); -void aic23_power_down(void); - -#endif /* __ASM_ARCH_AIC23_H */ diff --git a/include/asm-arm/arch-omap/blizzard.h b/include/asm-arm/arch-omap/blizzard.h deleted file mode 100644 index 8d160f17137..00000000000 --- a/include/asm-arm/arch-omap/blizzard.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _BLIZZARD_H -#define _BLIZZARD_H - -struct blizzard_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected : 1; -}; - -#endif diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h deleted file mode 100644 index c7db9004ec3..00000000000 --- a/include/asm-arm/arch-omap/board-2430sdp.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-2430sdp.h - * - * Hardware definitions for TI OMAP2430 SDP board. - * - * Based on board-h4.h by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_2430SDP_H -#define __ASM_ARCH_OMAP_2430SDP_H - -/* Placeholder for 2430SDP specific defines */ -#define OMAP24XX_ETHR_START 0x08000300 -#define OMAP24XX_ETHR_GPIO_IRQ 149 -#define SDP2430_CS0_BASE 0x04000000 - -#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ - -#endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h deleted file mode 100644 index 9aee15d9714..00000000000 --- a/include/asm-arm/arch-omap/board-ams-delta.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-ams-delta.h - * - * Copyright (C) 2006 Jonathan McDowell - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H -#define __ASM_ARCH_OMAP_AMS_DELTA_H - -#if defined (CONFIG_MACH_AMS_DELTA) - -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 -#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 -#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 -#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 - -#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 -#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 -#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 -#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 -#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 -#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 -#define AMS_DELTA_GPIO_PIN_CONFIG 11 -#define AMS_DELTA_GPIO_PIN_NAND_RB 12 - -#ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); -#endif - -#endif /* CONFIG_MACH_AMS_DELTA */ - -#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h deleted file mode 100644 index 547125a4695..00000000000 --- a/include/asm-arm/arch-omap/board-apollon.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-apollon.h - * - * Hardware definitions for Samsung OMAP24XX Apollon board. - * - * Initial creation by Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_APOLLON_H -#define __ASM_ARCH_OMAP_APOLLON_H - -extern void apollon_mmc_init(void); - -/* Placeholder for APOLLON specific defines */ -#define APOLLON_ETHR_GPIO_IRQ 74 - -#endif /* __ASM_ARCH_OMAP_APOLLON_H */ - diff --git a/include/asm-arm/arch-omap/board-fsample.h b/include/asm-arm/arch-omap/board-fsample.h deleted file mode 100644 index 89a1e529fb6..00000000000 --- a/include/asm-arm/arch-omap/board-fsample.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-fsample.h - * - * Board-specific goodies for TI F-Sample. - * - * Copyright (C) 2006 Google, Inc. - * Author: Brian Swetland - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FSAMPLE_H -#define __ASM_ARCH_OMAP_FSAMPLE_H - -/* fsample is pretty close to p2-sample */ -#include - -#define fsample_cpld_read(reg) __raw_readb(reg) -#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) - -#define FSAMPLE_CPLD_BASE 0xE8100000 -#define FSAMPLE_CPLD_SIZE SZ_4K -#define FSAMPLE_CPLD_START 0x05080000 - -#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) -#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) -#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) -#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) - -#define FSAMPLE_CPLD_BIT_BT_RESET 0 -#define FSAMPLE_CPLD_BIT_LCD_RESET 1 -#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 -#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 -#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 -#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 -#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 -#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 -#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 -#define FSAMPLE_CPLD_BIT_OTG_RESET 9 - -#define fsample_cpld_set(bit) \ - fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) - -#define fsample_cpld_clear(bit) \ - fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) - -#endif diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h deleted file mode 100644 index c322796d0d2..00000000000 --- a/include/asm-arm/arch-omap/board-h2.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-h2.h - * - * Hardware definitions for TI OMAP1610 H2 board. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_H2_H -#define __ASM_ARCH_OMAP_H2_H - -/* Placeholder for H2 specific defines */ - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define OMAP1610_ETHR_START 0x04000300 - -extern void h2_mmc_init(void); -extern void h2_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_OMAP_H2_H */ - diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h deleted file mode 100644 index c5d0f32a40a..00000000000 --- a/include/asm-arm/arch-omap/board-h3.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-h3.h - * - * Copyright (C) 2001 RidgeRun, Inc. - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_H3_H -#define __ASM_ARCH_OMAP_H3_H - -/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ -#define OMAP1710_ETHR_START 0x04000300 - -extern void h3_mmc_init(void); -extern void h3_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h deleted file mode 100644 index 7e0efef4bb6..00000000000 --- a/include/asm-arm/arch-omap/board-h4.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-h4.h - * - * Hardware definitions for TI OMAP1610 H4 board. - * - * Initial creation by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_H4_H -#define __ASM_ARCH_OMAP_H4_H - -/* Placeholder for H4 specific defines */ -#define OMAP24XX_ETHR_GPIO_IRQ 92 -#endif /* __ASM_ARCH_OMAP_H4_H */ - diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h deleted file mode 100644 index 9ca03dec9d3..00000000000 --- a/include/asm-arm/arch-omap/board-innovator.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-innovator.h - * - * Copyright (C) 2001 RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_INNOVATOR_H -#define __ASM_ARCH_OMAP_INNOVATOR_H - -#if defined (CONFIG_ARCH_OMAP15XX) - -#ifndef OMAP_SDRAM_DEVICE -#define OMAP_SDRAM_DEVICE D256M_1X16_4B -#endif - -#define OMAP1510P1_IMIF_PRI_VALUE 0x00 -#define OMAP1510P1_EMIFS_PRI_VALUE 0x00 -#define OMAP1510P1_EMIFF_PRI_VALUE 0x00 - -#ifndef __ASSEMBLY__ -void fpga_write(unsigned char val, int reg); -unsigned char fpga_read(int reg); -#endif - -#endif /* CONFIG_ARCH_OMAP15XX */ - -#if defined (CONFIG_ARCH_OMAP16XX) - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define INNOVATOR1610_ETHR_START 0x04000300 - -#endif /* CONFIG_ARCH_OMAP1610 */ -#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */ diff --git a/include/asm-arm/arch-omap/board-nokia.h b/include/asm-arm/arch-omap/board-nokia.h deleted file mode 100644 index 72deea20349..00000000000 --- a/include/asm-arm/arch-omap/board-nokia.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-nokia.h - * - * Information structures for Nokia-specific board config data - * - * Copyright (C) 2005 Nokia Corporation - */ - -#ifndef _OMAP_BOARD_NOKIA_H -#define _OMAP_BOARD_NOKIA_H - -#include - -#define OMAP_TAG_NOKIA_BT 0x4e01 -#define OMAP_TAG_WLAN_CX3110X 0x4e02 -#define OMAP_TAG_CBUS 0x4e03 -#define OMAP_TAG_EM_ASIC_BB5 0x4e04 - - -#define BT_CHIP_CSR 1 -#define BT_CHIP_TI 2 - -#define BT_SYSCLK_12 1 -#define BT_SYSCLK_38_4 2 - -struct omap_bluetooth_config { - u8 chip_type; - u8 bt_wakeup_gpio; - u8 host_wakeup_gpio; - u8 reset_gpio; - u8 bt_uart; - u8 bd_addr[6]; - u8 bt_sysclk; -}; - -struct omap_wlan_cx3110x_config { - u8 chip_type; - s16 power_gpio; - s16 irq_gpio; - s16 spi_cs_gpio; -}; - -struct omap_cbus_config { - s16 clk_gpio; - s16 dat_gpio; - s16 sel_gpio; -}; - -struct omap_em_asic_bb5_config { - s16 retu_irq_gpio; - s16 tahvo_irq_gpio; -}; - -#endif diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h deleted file mode 100644 index 94926090e47..00000000000 --- a/include/asm-arm/arch-omap/board-osk.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-osk.h - * - * Hardware definitions for TI OMAP5912 OSK board. - * - * Written by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_OSK_H -#define __ASM_ARCH_OMAP_OSK_H - -/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ -#define OMAP_OSK_ETHR_START 0x04800300 - -/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with - * alternate pin configurations for hardware-controlled blinking. - */ -#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) -# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) -# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) -# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) -# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) -# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) - -#endif /* __ASM_ARCH_OMAP_OSK_H */ - diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h deleted file mode 100644 index 6fac2c8935b..00000000000 --- a/include/asm-arm/arch-omap/board-palmte.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-palmte.h - * - * Hardware definitions for the Palm Tungsten E device. - * - * Maintainters : http://palmtelinux.sf.net - * palmtelinux-developpers@lists.sf.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMTE_H -#define __OMAP_BOARD_PALMTE_H - -#define PALMTE_USBDETECT_GPIO 0 -#define PALMTE_USB_OR_DC_GPIO 1 -#define PALMTE_TSC_GPIO 4 -#define PALMTE_PINTDAV_GPIO 6 -#define PALMTE_MMC_WP_GPIO 8 -#define PALMTE_MMC_POWER_GPIO 9 -#define PALMTE_HDQ_GPIO 11 -#define PALMTE_HEADPHONES_GPIO 14 -#define PALMTE_SPEAKER_GPIO 15 -#define PALMTE_DC_GPIO OMAP_MPUIO(2) -#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4) -#define PALMTE_MMC1_GPIO OMAP_MPUIO(6) -#define PALMTE_MMC2_GPIO OMAP_MPUIO(7) -#define PALMTE_MMC3_GPIO OMAP_MPUIO(11) - -#endif /* __OMAP_BOARD_PALMTE_H */ diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/include/asm-arm/arch-omap/board-palmtt.h deleted file mode 100644 index d9590b0ec90..00000000000 --- a/include/asm-arm/arch-omap/board-palmtt.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-palmte.h - * - * Hardware definitions for the Palm Tungsten|T device. - * - * Maintainters : Marek Vasut - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMTT_H -#define __OMAP_BOARD_PALMTT_H - -#define PALMTT_USBDETECT_GPIO 0 -#define PALMTT_CABLE_GPIO 1 -#define PALMTT_LED_GPIO 3 -#define PALMTT_PENIRQ_GPIO 6 -#define PALMTT_MMC_WP_GPIO 8 -#define PALMTT_HDQ_GPIO 11 - -#endif /* __OMAP_BOARD_PALMTT_H */ diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/include/asm-arm/arch-omap/board-palmz71.h deleted file mode 100644 index 1252a859787..00000000000 --- a/include/asm-arm/arch-omap/board-palmz71.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-palmz71.h - * - * Hardware definitions for the Palm Zire71 device. - * - * Maintainters : Marek Vasut - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMZ71_H -#define __OMAP_BOARD_PALMZ71_H - -#define PALMZ71_USBDETECT_GPIO 0 -#define PALMZ71_PENIRQ_GPIO 6 -#define PALMZ71_MMC_WP_GPIO 8 -#define PALMZ71_HDQ_GPIO 11 - -#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) -#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) -#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) -#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) - -#endif /* __OMAP_BOARD_PALMZ71_H */ diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h deleted file mode 100644 index d7429cb0f72..00000000000 --- a/include/asm-arm/arch-omap/board-perseus2.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-perseus2.h - * - * Copyright 2003 by Texas Instruments Incorporated - * OMAP730 / Perseus2 support by Jean Pihet - * - * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com) - * Author: RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_PERSEUS2_H -#define __ASM_ARCH_OMAP_PERSEUS2_H - -#include - -#ifndef OMAP_SDRAM_DEVICE -#define OMAP_SDRAM_DEVICE D256M_1X16_4B -#endif - -#endif diff --git a/include/asm-arm/arch-omap/board-sx1.h b/include/asm-arm/arch-omap/board-sx1.h deleted file mode 100644 index 355adbdaae3..00000000000 --- a/include/asm-arm/arch-omap/board-sx1.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Siemens SX1 board definitions - * - * Copyright: Vovan888 at gmail com - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H -#define __ASM_ARCH_SX1_I2C_CHIPS_H - -#define SOFIA_MAX_LIGHT_VAL 0x2B - -#define SOFIA_I2C_ADDR 0x32 -/* Sofia reg 3 bits masks */ -#define SOFIA_POWER1_REG 0x03 - -#define SOFIA_USB_POWER 0x01 -#define SOFIA_MMC_POWER 0x04 -#define SOFIA_BLUETOOTH_POWER 0x08 -#define SOFIA_MMILIGHT_POWER 0x20 - -#define SOFIA_POWER2_REG 0x04 -#define SOFIA_BACKLIGHT_REG 0x06 -#define SOFIA_KEYLIGHT_REG 0x07 -#define SOFIA_DIMMING_REG 0x09 - - -/* Function Prototypes for SX1 devices control on I2C bus */ - -int sx1_setbacklight(u8 backlight); -int sx1_getbacklight(u8 *backlight); -int sx1_setkeylight(u8 keylight); -int sx1_getkeylight(u8 *keylight); - -int sx1_setmmipower(u8 onoff); -int sx1_setusbpower(u8 onoff); -int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); -int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); - -/* MMC prototypes */ - -extern void sx1_mmc_init(void); -extern void sx1_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/include/asm-arm/arch-omap/board-voiceblue.h deleted file mode 100644 index ed6d346ee12..00000000000 --- a/include/asm-arm/arch-omap/board-voiceblue.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl - * - * Hardware definitions for OMAP5910 based VoiceBlue board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VOICEBLUE_H -#define __ASM_ARCH_VOICEBLUE_H - -extern void voiceblue_wdt_enable(void); -extern void voiceblue_wdt_disable(void); -extern void voiceblue_wdt_ping(void); -extern void voiceblue_reset(void); - -#endif /* __ASM_ARCH_VOICEBLUE_H */ - diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h deleted file mode 100644 index 99564c70f12..00000000000 --- a/include/asm-arm/arch-omap/board.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include - -#include - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_MMC 0x4f02 -#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 -#define OMAP_TAG_USB 0x4f04 -#define OMAP_TAG_LCD 0x4f05 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_UART 0x4f07 -#define OMAP_TAG_FBMEM 0x4f08 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_mmc_conf { - unsigned enabled:1; - /* nomux means "standard" muxing is wrong on this board, and that - * board-specific code handled it before common init logic. - */ - unsigned nomux:1; - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - /* 4 wire signaling is optional, and is only used for SD/SDIO */ - unsigned wire4:1; - s16 power_pin; - s16 switch_pin; - s16 wp_pin; -}; - -struct omap_mmc_config { - struct omap_mmc_conf mmc[2]; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); - int (*check_fb)(struct fb_info *fb); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - - -#include - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h deleted file mode 100644 index 4c7b3514f71..00000000000 --- a/include/asm-arm/arch-omap/clock.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/clock.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -struct module; -struct clk; - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - -struct clksel_rate { - u8 div; - u32 val; - u8 flags; -}; - -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - u16 last_rounded_m; - u8 last_rounded_n; - unsigned long last_rounded_rate; - unsigned int rate_tolerance; - u16 max_multiplier; - u8 max_divider; - u32 max_tolerance; -# if defined(CONFIG_ARCH_OMAP3) - u8 modes; - void __iomem *control_reg; - u32 enable_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - void __iomem *autoidle_reg; - u32 autoidle_mask; - void __iomem *idlest_reg; - u8 idlest_bit; -# endif -}; - -#endif - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - int id; - struct clk *parent; - unsigned long rate; - __u32 flags; - void __iomem *enable_reg; - __u8 enable_bit; - __s8 usecount; - void (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - int (*enable)(struct clk *); - void (*disable)(struct clk *); -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - u8 fixed_div; - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; -#else - __u8 rate_offset; - __u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct cpufreq_frequency_table; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - struct clk * (*clk_get_parent)(struct clk *clk); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -#ifdef CONFIG_CPU_FREQ - void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); -#endif -}; - -extern unsigned int mpurate; - -extern int clk_init(struct clk_functions * custom_clocks); -extern int clk_register(struct clk *clk); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern void followparent_recalc(struct clk * clk); -extern void clk_allow_idle(struct clk *clk); -extern void clk_deny_idle(struct clk *clk); -extern int clk_get_usecount(struct clk *clk); -extern void clk_enable_init_clocks(void); - -/* Clock flags */ -#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ -#define RATE_FIXED (1 << 1) /* Fixed clock rate */ -#define RATE_PROPAGATES (1 << 2) /* Program children too */ -#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */ -#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */ -#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ -#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ -#define CLOCK_IDLE_CONTROL (1 << 7) -#define CLOCK_NO_IDLE_PARENT (1 << 8) -#define DELAYED_APP (1 << 9) /* Delay application of clock */ -#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ -#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ -/* bits 13-20 are currently free */ -#define CLOCK_IN_OMAP310 (1 << 21) -#define CLOCK_IN_OMAP730 (1 << 22) -#define CLOCK_IN_OMAP1510 (1 << 23) -#define CLOCK_IN_OMAP16XX (1 << 24) -#define CLOCK_IN_OMAP242X (1 << 25) -#define CLOCK_IN_OMAP243X (1 << 26) -#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ -#define PARENT_CONTROLS_CLOCK (1 << 28) -#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ -#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ - -/* Clksel_rate flags */ -#define DEFAULT_RATE (1 << 0) -#define RATE_IN_242X (1 << 1) -#define RATE_IN_243X (1 << 2) -#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ -#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) - - -/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */ -#define CORE_CLK_SRC_32K 0 -#define CORE_CLK_SRC_DPLL 1 -#define CORE_CLK_SRC_DPLL_X2 2 - -#endif diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h deleted file mode 100644 index 8ac03071f60..00000000000 --- a/include/asm-arm/arch-omap/common.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include - -struct sys_timer; - -extern void omap_map_common_io(void); -extern struct sys_timer omap_timer; -extern void omap_serial_init(void); -#ifdef CONFIG_I2C_OMAP -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif - -/* IO bases for various OMAP processors */ -struct omap_globals { - void __iomem *tap; /* Control module ID code */ - void __iomem *sdrc; /* SDRAM Controller */ - void __iomem *sms; /* SDRAM Memory Scheduler */ - void __iomem *ctrl; /* System Control Module */ - void __iomem *prm; /* Power and Reset Management */ - void __iomem *cm; /* Clock Management */ -}; - -void omap2_set_globals_242x(void); -void omap2_set_globals_243x(void); -void omap2_set_globals_343x(void); - -/* These get called from omap2_set_globals_xxxx(), do not call these */ -void omap2_set_globals_memory(struct omap_globals *); -void omap2_set_globals_control(struct omap_globals *); -void omap2_set_globals_prcm(struct omap_globals *); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h deleted file mode 100644 index 987553e3eeb..00000000000 --- a/include/asm-arm/arch-omap/control.h +++ /dev/null @@ -1,189 +0,0 @@ -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - -/* - * include/asm-arm/arch-omap/control.h - * - * OMAP2/3 System Control Module definitions - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - */ - -#include - -#define OMAP242X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) - -/* - * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for - * OMAP24XX and OMAP34XX. - */ - -/* Control submodule offsets */ - -#define OMAP2_CONTROL_INTERFACE 0x000 -#define OMAP2_CONTROL_PADCONFS 0x030 -#define OMAP2_CONTROL_GENERAL 0x270 -#define OMAP343X_CONTROL_MEM_WKUP 0x600 -#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 -#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 - -/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ - -#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) - -/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ -#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) -#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) -#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) -#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) -#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) -#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) -#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) -#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) -#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) -#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) -#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) -#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) - -/* 242x-only CONTROL_GENERAL register offsets */ -#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ -#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) - -/* 243x-only CONTROL_GENERAL register offsets */ -/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ -#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) -#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) - -/* 24xx-only CONTROL_GENERAL register offsets */ -#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) -#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) -#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) -#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) -#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) -#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) -#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) -#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) -#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) -#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) -#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) -#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) - -/* 34xx-only CONTROL_GENERAL register offsets */ -#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) -#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) -#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) -#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) -#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) -#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) -#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) -#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) -#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) -#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) - -/* - * REVISIT: This list of registers is not comprehensive - there are more - * that should be added. - */ - -/* - * Control module register bit defines - these should eventually go into - * their own regbits file. Some of these will be complicated, depending - * on the device type (general-purpose, emulator, test, secure, bad, other) - * and the security mode (secure, non-secure, don't care) - */ -/* CONTROL_DEVCONF0 bits */ -#define OMAP24XX_USBSTANDBYCTRL (1 << 15) -#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) -#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) - -/* CONTROL_DEVCONF1 bits */ -#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ -#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ -#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ - -/* CONTROL_STATUS bits */ -#define OMAP2_DEVICETYPE_MASK (0x7 << 8) -#define OMAP2_SYSBOOT_5_MASK (1 << 5) -#define OMAP2_SYSBOOT_4_MASK (1 << 4) -#define OMAP2_SYSBOOT_3_MASK (1 << 3) -#define OMAP2_SYSBOOT_2_MASK (1 << 2) -#define OMAP2_SYSBOOT_1_MASK (1 << 1) -#define OMAP2_SYSBOOT_0_MASK (1 << 0) - -#ifndef __ASSEMBLY__ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -extern void __iomem *omap_ctrl_base_get(void); -extern u8 omap_ctrl_readb(u16 offset); -extern u16 omap_ctrl_readw(u16 offset); -extern u32 omap_ctrl_readl(u16 offset); -extern void omap_ctrl_writeb(u8 val, u16 offset); -extern void omap_ctrl_writew(u16 val, u16 offset); -extern void omap_ctrl_writel(u32 val, u16 offset); -#else -#define omap_ctrl_base_get() 0 -#define omap_ctrl_readb(x) 0 -#define omap_ctrl_readw(x) 0 -#define omap_ctrl_readl(x) 0 -#define omap_ctrl_writeb(x, y) WARN_ON(1) -#define omap_ctrl_writew(x, y) WARN_ON(1) -#define omap_ctrl_writel(x, y) WARN_ON(1) -#endif -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_CONTROL_H */ - diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h deleted file mode 100644 index 52db09f8328..00000000000 --- a/include/asm-arm/arch-omap/cpu.h +++ /dev/null @@ -1,402 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/cpu.h - * - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -struct omap_chip_id { - u8 oc; -}; - -#define OMAP_CHIP_INIT(x) { .oc = x } - -extern unsigned int system_rev; - -#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f) - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)) -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2 can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3430 -# endif -#endif - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - */ -#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((system_rev >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap24xx -# undef cpu_is_omap242x -# undef cpu_is_omap243x -# define cpu_is_omap24xx() is_omap24xx() -# define cpu_is_omap242x() is_omap242x() -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap330(): True for OMAP330 - * cpu_is_omap730(): True for OMAP730 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(730, 0x0730) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap730() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() 1 -# endif -#endif - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 330 vs. 1510 and 1611B/5912 vs. 1710. - */ -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap3430 -# define cpu_is_omap3430() is_omap3430() -#endif - -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -/* - * Macros to detect silicon revision of OMAP2/3 processors. - * is_sil_rev_greater_than: true if passed cpu type & its rev is greater. - * is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser. - * is_sil_rev_equal_to: true if passed cpu type & its rev is equal. - * get_sil_rev: return the silicon rev value. - */ -#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16) -#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12) - -#define is_sil_rev_greater_than(rev) \ - ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ - (get_sil_revision(system_rev) > get_sil_revision(rev))) - -#define is_sil_rev_less_than(rev) \ - ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ - (get_sil_revision(system_rev) < get_sil_revision(rev))) - -#define is_sil_rev_equal_to(rev) \ - ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ - (get_sil_revision(system_rev) == get_sil_revision(rev))) - -#define get_sil_rev() \ - get_sil_revision(system_rev) - -/* Various silicon macros defined here */ -#define OMAP2420_REV_ES1_0 0x24200000 -#define OMAP2420_REV_ES2_0 0x24201000 -#define OMAP2430_REV_ES1_0 0x24300000 -#define OMAP3430_REV_ES1_0 0x34300000 -#define OMAP3430_REV_ES2_0 0x34301000 -#define OMAP3430_REV_ES2_1 0x34302000 -#define OMAP3430_REV_ES2_2 0x34303000 - -/* - * omap_chip bits - * - * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is - * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates - * something that is only valid on that particular ES revision. - * - * These bits may be ORed together to indicate structures that are - * available on multiple chip types. - * - * To test whether a particular structure matches the current OMAP chip type, - * use omap_chip_is(). - * - */ -#define CHIP_IS_OMAP2420 (1 << 0) -#define CHIP_IS_OMAP2430 (1 << 1) -#define CHIP_IS_OMAP3430 (1 << 2) -#define CHIP_IS_OMAP3430ES1 (1 << 3) -#define CHIP_IS_OMAP3430ES2 (1 << 4) - -#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) - -int omap_chip_is(struct omap_chip_id oci); - - -/* - * Macro to detect device type i.e. EMU/HS/TST/GP/BAD - */ -#define DEVICE_TYPE_TEST 0 -#define DEVICE_TYPE_EMU 1 -#define DEVICE_TYPE_SEC 2 -#define DEVICE_TYPE_GP 3 -#define DEVICE_TYPE_BAD 4 - -#define get_device_type() ((system_rev & 0x700) >> 8) -#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST) -#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU) -#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC) -#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP) -#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD) - -void omap2_check_revision(void); - -#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ - -#endif diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S deleted file mode 100644 index ca4f577f967..00000000000 --- a/include/asm-arm/arch-omap/debug-macro.S +++ /dev/null @@ -1,58 +0,0 @@ -/* linux/include/asm-arm/arch-omap/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? -#ifdef CONFIG_ARCH_OMAP1 - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - orr \rx, \rx, #0x00009000 @ UART 3 -#endif -#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) - orr \rx, \rx, #0x00000800 @ UART 2 & 3 -#endif - -#elif CONFIG_ARCH_OMAP2 - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base - orr \rx, \rx, #0x0006a000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART2 - add \rx, \rx, #0x00002000 @ UART 2 -#endif -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - add \rx, \rx, #0x00004000 @ UART 3 -#endif -#endif - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends - and \rd, \rd, #0x60 - teq \rd, #0x60 - beq 1002f - ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only - and \rd, \rd, #0x60 - teq \rd, #0x60 - bne 1001b -1002: - .endm - - .macro waituart,rd,rx - .endm diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h deleted file mode 100644 index f4dcb958786..00000000000 --- a/include/asm-arm/arch-omap/dma.h +++ /dev/null @@ -1,570 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/dma.h - * - * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* Hardware registers for omap1 */ -#define OMAP1_DMA_BASE (0xfffed800) - -#define OMAP1_DMA_GCR 0x400 -#define OMAP1_DMA_GSCR 0x404 -#define OMAP1_DMA_GRST 0x408 -#define OMAP1_DMA_HW_ID 0x442 -#define OMAP1_DMA_PCH2_ID 0x444 -#define OMAP1_DMA_PCH0_ID 0x446 -#define OMAP1_DMA_PCH1_ID 0x448 -#define OMAP1_DMA_PCHG_ID 0x44a -#define OMAP1_DMA_PCHD_ID 0x44c -#define OMAP1_DMA_CAPS_0_U 0x44e -#define OMAP1_DMA_CAPS_0_L 0x450 -#define OMAP1_DMA_CAPS_1_U 0x452 -#define OMAP1_DMA_CAPS_1_L 0x454 -#define OMAP1_DMA_CAPS_2 0x456 -#define OMAP1_DMA_CAPS_3 0x458 -#define OMAP1_DMA_CAPS_4 0x45a -#define OMAP1_DMA_PCH2_SR 0x460 -#define OMAP1_DMA_PCH0_SR 0x480 -#define OMAP1_DMA_PCH1_SR 0x482 -#define OMAP1_DMA_PCHD_SR 0x4c0 - -/* Hardware registers for omap2 and omap3 */ -#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) -#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) - -#define OMAP_DMA4_REVISION 0x00 -#define OMAP_DMA4_GCR 0x78 -#define OMAP_DMA4_IRQSTATUS_L0 0x08 -#define OMAP_DMA4_IRQSTATUS_L1 0x0c -#define OMAP_DMA4_IRQSTATUS_L2 0x10 -#define OMAP_DMA4_IRQSTATUS_L3 0x14 -#define OMAP_DMA4_IRQENABLE_L0 0x18 -#define OMAP_DMA4_IRQENABLE_L1 0x1c -#define OMAP_DMA4_IRQENABLE_L2 0x20 -#define OMAP_DMA4_IRQENABLE_L3 0x24 -#define OMAP_DMA4_SYSSTATUS 0x28 -#define OMAP_DMA4_OCP_SYSCONFIG 0x2c -#define OMAP_DMA4_CAPS_0 0x64 -#define OMAP_DMA4_CAPS_2 0x6c -#define OMAP_DMA4_CAPS_3 0x70 -#define OMAP_DMA4_CAPS_4 0x74 - -#define OMAP1_LOGICAL_DMA_CH_COUNT 17 -#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ - -/* Common channel specific registers for omap1 */ -#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00) -#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00) -#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02) -#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04) -#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06) -#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10) -#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12) -#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14) -#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16) -#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */ -#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18) -#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a) -#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c) -#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e) -#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28) - -/* Common channel specific registers for omap2 */ -#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80) -#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80) -#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84) -#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88) -#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c) -#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90) -#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94) -#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98) -#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4) -#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8) -#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac) -#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0) -#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4) -#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8) - -/* Channel specific registers only on omap1 */ -#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08) -#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a) -#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c) -#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e) -#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20) -#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22) -#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24) -#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */ -#define OMAP1_DMA_CCEN(n) 0 -#define OMAP1_DMA_CCFN(n) 0 - -/* Channel specific registers only on omap2 */ -#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c) -#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0) -#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc) -#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0) -#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4) - -/* Dummy defines to keep multi-omap compiles happy */ -#define OMAP1_DMA_REVISION 0 -#define OMAP1_DMA_IRQSTATUS_L0 0 -#define OMAP1_DMA_IRQENABLE_L0 0 -#define OMAP1_DMA_OCP_SYSCONFIG 0 -#define OMAP_DMA4_HW_ID 0 -#define OMAP_DMA4_CAPS_0_L 0 -#define OMAP_DMA4_CAPS_0_U 0 -#define OMAP_DMA4_CAPS_1_L 0 -#define OMAP_DMA4_CAPS_1_U 0 -#define OMAP_DMA4_GSCR 0 -#define OMAP_DMA4_CPC(n) 0 - -#define OMAP_DMA4_LCH_CTRL(n) 0 -#define OMAP_DMA4_COLOR_L(n) 0 -#define OMAP_DMA4_COLOR_U(n) 0 -#define OMAP_DMA4_CCR2(n) 0 -#define OMAP1_DMA_CSSA(n) 0 -#define OMAP1_DMA_CDSA(n) 0 -#define OMAP_DMA4_CSSA_L(n) 0 -#define OMAP_DMA4_CSSA_U(n) 0 -#define OMAP_DMA4_CDSA_L(n) 0 -#define OMAP_DMA4_CDSA_U(n) 0 - -/*----------------------------------------------------------------------------*/ - -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -/*----------------------------------------------------------------------------*/ - -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - -#define OMAP1_DMA_TOUT_IRQ (1 << 0) -#define OMAP_DMA_DROP_IRQ (1 << 1) -#define OMAP_DMA_HALF_IRQ (1 << 2) -#define OMAP_DMA_FRAME_IRQ (1 << 3) -#define OMAP_DMA_LAST_IRQ (1 << 4) -#define OMAP_DMA_BLOCK_IRQ (1 << 5) -#define OMAP1_DMA_SYNC_IRQ (1 << 6) -#define OMAP2_DMA_PKT_IRQ (1 << 7) -#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) -#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) -#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) -#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) - -#define OMAP_DMA_DATA_TYPE_S8 0x00 -#define OMAP_DMA_DATA_TYPE_S16 0x01 -#define OMAP_DMA_DATA_TYPE_S32 0x02 - -#define OMAP_DMA_SYNC_ELEMENT 0x00 -#define OMAP_DMA_SYNC_FRAME 0x01 -#define OMAP_DMA_SYNC_BLOCK 0x02 -#define OMAP_DMA_SYNC_PACKET 0x03 - -#define OMAP_DMA_SRC_SYNC 0x01 -#define OMAP_DMA_DST_SYNC 0x00 - -#define OMAP_DMA_PORT_EMIFF 0x00 -#define OMAP_DMA_PORT_EMIFS 0x01 -#define OMAP_DMA_PORT_OCP_T1 0x02 -#define OMAP_DMA_PORT_TIPB 0x03 -#define OMAP_DMA_PORT_OCP_T2 0x04 -#define OMAP_DMA_PORT_MPUI 0x05 - -#define OMAP_DMA_AMODE_CONSTANT 0x00 -#define OMAP_DMA_AMODE_POST_INC 0x01 -#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 -#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 - -#define DMA_DEFAULT_FIFO_DEPTH 0x10 -#define DMA_DEFAULT_ARB_RATE 0x01 -/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ -#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ -#define DMA_THREAD_RESERVE_ONET (0x01 << 12) -#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) -#define DMA_THREAD_RESERVE_THREET (0x03 << 12) -#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ -#define DMA_THREAD_FIFO_75 (0x01 << 14) -#define DMA_THREAD_FIFO_25 (0x02 << 14) -#define DMA_THREAD_FIFO_50 (0x03 << 14) - -/* Chaining modes*/ -#ifndef CONFIG_ARCH_OMAP1 -#define OMAP_DMA_STATIC_CHAIN 0x1 -#define OMAP_DMA_DYNAMIC_CHAIN 0x2 -#define OMAP_DMA_CHAIN_ACTIVE 0x1 -#define OMAP_DMA_CHAIN_INACTIVE 0x0 -#endif - -#define DMA_CH_PRIO_HIGH 0x1 -#define DMA_CH_PRIO_LOW 0x0 /* Def */ - -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - -enum omap_dma_burst_mode { - OMAP_DMA_DATA_BURST_DIS = 0, - OMAP_DMA_DATA_BURST_4, - OMAP_DMA_DATA_BURST_8, - OMAP_DMA_DATA_BURST_16, -}; - -enum end_type { - OMAP_DMA_LITTLE_ENDIAN = 0, - OMAP_DMA_BIG_ENDIAN -}; - -enum omap_dma_color_mode { - OMAP_DMA_COLOR_DIS = 0, - OMAP_DMA_CONSTANT_FILL, - OMAP_DMA_TRANSPARENT_COPY -}; - -enum omap_dma_write_mode { - OMAP_DMA_WRITE_NON_POSTED = 0, - OMAP_DMA_WRITE_POSTED, - OMAP_DMA_WRITE_LAST_NON_POSTED -}; - -enum omap_dma_channel_mode { - OMAP_DMA_LCH_2D = 0, - OMAP_DMA_LCH_G, - OMAP_DMA_LCH_P, - OMAP_DMA_LCH_PD -}; - -struct omap_dma_channel_params { - int data_type; /* data type 8,16,32 */ - int elem_count; /* number of elements in a frame */ - int frame_count; /* number of frames in a element */ - - int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int src_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long src_start; /* source address : physical */ - int src_ei; /* source element index */ - int src_fi; /* source frame index */ - - int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int dst_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long dst_start; /* source address : physical */ - int dst_ei; /* source element index */ - int dst_fi; /* source frame index */ - - int trigger; /* trigger attached if the channel is - synchronized */ - int sync_mode; /* sycn on element, frame , block or packet */ - int src_or_dst_synch; /* source synch(1) or destination synch(0) */ - - int ie; /* interrupt enabled */ - - unsigned char read_prio;/* read priority */ - unsigned char write_prio;/* write priority */ - -#ifndef CONFIG_ARCH_OMAP1 - enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ -#endif -}; - - -extern void omap_set_dma_priority(int lch, int dst_port, int priority); -extern int omap_request_dma(int dev_id, const char *dev_name, - void (*callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch); -extern void omap_enable_dma_irq(int ch, u16 irq_bits); -extern void omap_disable_dma_irq(int ch, u16 irq_bits); -extern void omap_free_dma(int ch); -extern void omap_start_dma(int lch); -extern void omap_stop_dma(int lch); -extern void omap_set_dma_transfer_params(int lch, int data_type, - int elem_count, int frame_count, - int sync_mode, - int dma_trigger, int src_or_dst_synch); -extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, - u32 color); -extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); -extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); - -extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start, - int src_ei, int src_fi); -extern void omap_set_dma_src_index(int lch, int eidx, int fidx); -extern void omap_set_dma_src_data_pack(int lch, int enable); -extern void omap_set_dma_src_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start, - int dst_ei, int dst_fi); -extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); -extern void omap_set_dma_dest_data_pack(int lch, int enable); -extern void omap_set_dma_dest_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_params(int lch, - struct omap_dma_channel_params *params); - -extern void omap_dma_link_lch(int lch_head, int lch_queue); -extern void omap_dma_unlink_lch(int lch_head, int lch_queue); - -extern int omap_set_dma_callback(int lch, - void (*callback)(int lch, u16 ch_status, void *data), - void *data); -extern dma_addr_t omap_get_dma_src_pos(int lch); -extern dma_addr_t omap_get_dma_dst_pos(int lch); -extern void omap_clear_dma(int lch); -extern int omap_get_dma_active_status(int lch); -extern int omap_dma_running(void); -extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, - int tparams); -extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, - unsigned char write_prio); -extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); -extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); -extern int omap_get_dma_index(int lch, int *ei, int *fi); - -/* Chaining APIs */ -#ifndef CONFIG_ARCH_OMAP1 -extern int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int chain_id, u16 ch_status, - void *data), - int *chain_id, int no_of_chans, - int chain_mode, - struct omap_dma_channel_params params); -extern int omap_free_dma_chain(int chain_id); -extern int omap_dma_chain_a_transfer(int chain_id, int src_start, - int dest_start, int elem_count, - int frame_count, void *callbk_data); -extern int omap_start_dma_chain_transfers(int chain_id); -extern int omap_stop_dma_chain_transfers(int chain_id); -extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); -extern int omap_get_dma_chain_dst_pos(int chain_id); -extern int omap_get_dma_chain_src_pos(int chain_id); - -extern int omap_modify_dma_chain_params(int chain_id, - struct omap_dma_channel_params params); -extern int omap_dma_chain_status(int chain_id); -#endif - -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h deleted file mode 100644 index 02b29e8437a..00000000000 --- a/include/asm-arm/arch-omap/dmtimer.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/dmtimer.h - * - * OMAP Dual-Mode Timers - * - * Copyright (C) 2005 Nokia Corporation - * Author: Lauri Leukkunen - * PWM and clock framwork support by Timo Teras. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_DMTIMER_H -#define __ASM_ARCH_DMTIMER_H - -/* clock sources */ -#define OMAP_TIMER_SRC_SYS_CLK 0x00 -#define OMAP_TIMER_SRC_32_KHZ 0x01 -#define OMAP_TIMER_SRC_EXT_CLK 0x02 - -/* timer interrupt enable bits */ -#define OMAP_TIMER_INT_CAPTURE (1 << 2) -#define OMAP_TIMER_INT_OVERFLOW (1 << 1) -#define OMAP_TIMER_INT_MATCH (1 << 0) - -/* trigger types */ -#define OMAP_TIMER_TRIGGER_NONE 0x00 -#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 -#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 - -struct omap_dm_timer; -struct clk; - -int omap_dm_timer_init(void); - -struct omap_dm_timer *omap_dm_timer_request(void); -struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); -void omap_dm_timer_free(struct omap_dm_timer *timer); -void omap_dm_timer_enable(struct omap_dm_timer *timer); -void omap_dm_timer_disable(struct omap_dm_timer *timer); - -int omap_dm_timer_get_irq(struct omap_dm_timer *timer); - -u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); -struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer); - -void omap_dm_timer_trigger(struct omap_dm_timer *timer); -void omap_dm_timer_start(struct omap_dm_timer *timer); -void omap_dm_timer_stop(struct omap_dm_timer *timer); - -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); -void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); -void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); -void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); - -void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); - -unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); -void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); -unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); -void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); - -int omap_dm_timers_active(void); - - -#endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/include/asm-arm/arch-omap/dsp_common.h b/include/asm-arm/arch-omap/dsp_common.h deleted file mode 100644 index da97736f3ef..00000000000 --- a/include/asm-arm/arch-omap/dsp_common.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) - * - * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. - * - * Contact: Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef ASM_ARCH_DSP_COMMON_H -#define ASM_ARCH_DSP_COMMON_H - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) -extern void omap_dsp_request_mpui(void); -extern void omap_dsp_release_mpui(void); -extern int omap_dsp_request_mem(void); -extern int omap_dsp_release_mem(void); -#else -static inline int omap_dsp_request_mem(void) -{ - return 0; -} -#define omap_dsp_release_mem() do {} while (0) -#endif - -#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/eac.h b/include/asm-arm/arch-omap/eac.h deleted file mode 100644 index ccee3b0700b..00000000000 --- a/include/asm-arm/arch-omap/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include -#include -#include - -#include - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S deleted file mode 100644 index 67ed7839e78..00000000000 --- a/include/asm-arm/arch-omap/entry-macro.S +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-arm/arch-omap/entry-macro.S - * - * Low-level IRQ helper macros for OMAP-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include - -#if defined(CONFIG_ARCH_OMAP1) - -#if defined(CONFIG_ARCH_OMAP730) && \ - (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP730 doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) -#define INT_IH2_IRQ INT_730_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP15XX) -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP16XX) -#define INT_IH2_IRQ INT_1610_IH2_IRQ -#else -#warning "IH2 IRQ defaulted" -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#endif - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(OMAP_IH1_BASE) - ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] - ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] - mov \irqstat, #0xffffffff - bic \tmp, \irqstat, \tmp - tst \irqnr, \tmp - beq 1510f - - ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] - cmp \irqnr, #0 - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - cmpeq \irqnr, #INT_IH2_IRQ - ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE) - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - addeqs \irqnr, \irqnr, #32 -1510: - .endm - -#elif defined(CONFIG_ARCH_OMAP24XX) - -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP2_VA_IC_BASE - ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ - cmp \irqnr, #0x0 - bne 2222f - ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ - cmp \irqnr, #0x0 - bne 2222f - ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ - cmp \irqnr, #0x0 -2222: - ldrne \irqnr, [\base, #IRQ_SIR_IRQ] - - .endm - - .macro irq_prio_table - .endm - -#endif diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h deleted file mode 100644 index f420881d2a3..00000000000 --- a/include/asm-arm/arch-omap/fpga.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) -extern void omap1510_fpga_init_irq(void); -#else -#define omap1510_fpga_init_irq() (0) -#endif - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* Physical */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif diff --git a/include/asm-arm/arch-omap/gpio-switch.h b/include/asm-arm/arch-omap/gpio-switch.h deleted file mode 100644 index 10da0e07c0c..00000000000 --- a/include/asm-arm/arch-omap/gpio-switch.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * GPIO switch definitions - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H -#define __ASM_ARCH_OMAP_GPIO_SWITCH_H - -#include - -/* Cover: - * high -> closed - * low -> open - * Connection: - * high -> connected - * low -> disconnected - * Activity: - * high -> active - * low -> inactive - * - */ -#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 -#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 - -struct omap_gpio_switch { - const char *name; - s16 gpio; - unsigned flags:4; - unsigned type:4; - - /* Time in ms to debounce when transitioning from - * inactive state to active state. */ - u16 debounce_rising; - /* Same for transition from active to inactive state. */ - u16 debounce_falling; - - /* notify board-specific code about state changes */ - void (* notify)(void *data, int state); - void *notify_data; -}; - -/* Call at init time only */ -extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, - int count); - -#endif diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h deleted file mode 100644 index 5ee6a49864c..00000000000 --- a/include/asm-arm/arch-omap/gpio.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/gpio.h - * - * OMAP GPIO handling defines and functions - * - * Copyright (C) 2003-2005 Nokia Corporation - * - * Written by Juha Yrjölä - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_H -#define __ASM_ARCH_OMAP_GPIO_H - -#include -#include - -#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000 - -#ifdef CONFIG_ARCH_OMAP730 -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x02 -#define OMAP_MPUIO_IO_CNTL 0x04 -#define OMAP_MPUIO_KBR_LATCH 0x08 -#define OMAP_MPUIO_KBC 0x0a -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c -#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e -#define OMAP_MPUIO_KBD_INT 0x10 -#define OMAP_MPUIO_GPIO_INT 0x12 -#define OMAP_MPUIO_KBD_MASKIT 0x14 -#define OMAP_MPUIO_GPIO_MASKIT 0x16 -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 -#define OMAP_MPUIO_LATCH 0x1a -#else -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x04 -#define OMAP_MPUIO_IO_CNTL 0x08 -#define OMAP_MPUIO_KBR_LATCH 0x10 -#define OMAP_MPUIO_KBC 0x14 -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 -#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c -#define OMAP_MPUIO_KBD_INT 0x20 -#define OMAP_MPUIO_GPIO_INT 0x24 -#define OMAP_MPUIO_KBD_MASKIT 0x28 -#define OMAP_MPUIO_GPIO_MASKIT 0x2c -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 -#define OMAP_MPUIO_LATCH 0x34 -#endif - -#define OMAP34XX_NR_GPIOS 6 - -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - -#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ - IH_MPUIO_BASE + ((nr) & 0x0f) : \ - IH_GPIO_BASE + (nr)) - -extern int omap_gpio_init(void); /* Call from board init only */ -extern int omap_request_gpio(int gpio); -extern void omap_free_gpio(int gpio); -extern void omap_set_gpio_direction(int gpio, int is_input); -extern void omap_set_gpio_dataout(int gpio, int enable); -extern int omap_get_gpio_datain(int gpio); -extern void omap_set_gpio_debounce(int gpio, int enable); -extern void omap_set_gpio_debounce_time(int gpio, int enable); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls, using the new infrastructure - * which lets us plug in FPGA, I2C, and other implementations. - * * - * The original OMAP-specfic calls should eventually be removed. - */ - -#include -#include - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - if (gpio < (OMAP_MAX_GPIO_LINES + 16)) - return OMAP_GPIO_IRQ(gpio); - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) - return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; - return irq - IH_GPIO_BASE; -} - -#endif diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h deleted file mode 100644 index 4eed1f80e2f..00000000000 --- a/include/asm-arm/arch-omap/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h deleted file mode 100644 index 6a8e07ffc2d..00000000000 --- a/include/asm-arm/arch-omap/gpmc.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * General-Purpose Memory Controller for OMAP2 - * - * Copyright (C) 2005-2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_GPMC_H -#define __OMAP2_GPMC_H - -#define GPMC_CS_CONFIG1 0x00 -#define GPMC_CS_CONFIG2 0x04 -#define GPMC_CS_CONFIG3 0x08 -#define GPMC_CS_CONFIG4 0x0c -#define GPMC_CS_CONFIG5 0x10 -#define GPMC_CS_CONFIG6 0x14 -#define GPMC_CS_CONFIG7 0x18 -#define GPMC_CS_NAND_COMMAND 0x1c -#define GPMC_CS_NAND_ADDRESS 0x20 -#define GPMC_CS_NAND_DATA 0x24 - -#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) -#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) -#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) -#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) -#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) -#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) -#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) -#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) -#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) -#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) -#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) -#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) -#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) -#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) -#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) -#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) -#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) -#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) -#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) -#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) -#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) -#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) - -/* - * Note that all values in this struct are in nanoseconds, while - * the register values are in gpmc_fck cycles. - */ -struct gpmc_timings { - /* Minimum clock period for synchronous mode */ - u16 sync_clk; - - /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ - u16 cs_on; /* Assertion time */ - u16 cs_rd_off; /* Read deassertion time */ - u16 cs_wr_off; /* Write deassertion time */ - - /* ADV signal timings corresponding to GPMC_CONFIG3 */ - u16 adv_on; /* Assertion time */ - u16 adv_rd_off; /* Read deassertion time */ - u16 adv_wr_off; /* Write deassertion time */ - - /* WE signals timings corresponding to GPMC_CONFIG4 */ - u16 we_on; /* WE assertion time */ - u16 we_off; /* WE deassertion time */ - - /* OE signals timings corresponding to GPMC_CONFIG4 */ - u16 oe_on; /* OE assertion time */ - u16 oe_off; /* OE deassertion time */ - - /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ - u16 page_burst_access; /* Multiple access word delay */ - u16 access; /* Start-cycle to first data valid delay */ - u16 rd_cycle; /* Total read cycle time */ - u16 wr_cycle; /* Total write cycle time */ -}; - -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); - -extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); -extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); - -#endif diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h deleted file mode 100644 index 45fdfccbd5d..00000000000 --- a/include/asm-arm/arch-omap/hardware.h +++ /dev/null @@ -1,355 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon - * - * Reorganized for Linux-2.6 by Tony Lindgren - * and Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H - -#include -#ifndef __ASSEMBLER__ -#include -#include -#endif -#include - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE (0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - -#endif - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include "omap730.h" -#include "omap1510.h" -#include "omap24xx.h" -#include "omap16xx.h" -#include "omap34xx.h" - -#ifndef __ASSEMBLER__ - -/* - * --------------------------------------------------------------------------- - * Board specific defines - * --------------------------------------------------------------------------- - */ - -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#include "board-innovator.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H2 -#include "board-h2.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 -#include "board-perseus2.h" -#endif - -#ifdef CONFIG_MACH_OMAP_FSAMPLE -#include "board-fsample.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H3 -#include "board-h3.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H4 -#include "board-h4.h" -#endif - -#ifdef CONFIG_MACH_OMAP_2430SDP -#include "board-2430sdp.h" -#endif - -#ifdef CONFIG_MACH_OMAP_APOLLON -#include "board-apollon.h" -#endif - -#ifdef CONFIG_MACH_OMAP_OSK -#include "board-osk.h" -#endif - -#ifdef CONFIG_MACH_VOICEBLUE -#include "board-voiceblue.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMTE -#include "board-palmte.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMZ71 -#include "board-palmz71.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMTT -#include "board-palmtt.h" -#endif - -#ifdef CONFIG_MACH_SX1 -#include "board-sx1.h" -#endif - -#endif /* !__ASSEMBLER__ */ - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/include/asm-arm/arch-omap/hwa742.h b/include/asm-arm/arch-omap/hwa742.h deleted file mode 100644 index 577f492f2d3..00000000000 --- a/include/asm-arm/arch-omap/hwa742.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _HWA742_H -#define _HWA742_H - -struct hwa742_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected:1; -}; - -#endif diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h deleted file mode 100644 index 449e3568baa..00000000000 --- a/include/asm-arm/arch-omap/io.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from linux/include/asm-arm/arch-sa1100/io.h - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#define __mem_pci(a) (a) - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- - */ - -#define PCIO_BASE 0 - -#if defined(CONFIG_ARCH_OMAP1) - -#define IO_PHYS 0xFFFB0000 -#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define IO_SIZE 0x40000 -#define IO_VIRT (IO_PHYS - IO_OFFSET) -#define IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define io_p2v(pa) ((pa) - IO_OFFSET) -#define io_v2p(va) ((va) + IO_OFFSET) - -#elif defined(CONFIG_ARCH_OMAP2) - -/* We map both L3 and L4 on OMAP2 */ -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ -#define L3_24XX_VIRT 0xf8000000 -#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ -#define L4_24XX_VIRT 0xd8000000 -#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ - -#ifdef CONFIG_ARCH_OMAP2430 -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ -#define L4_WK_243X_VIRT 0xd9000000 -#define L4_WK_243X_SIZE SZ_1M -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ -#define OMAP243X_GPMC_VIRT 0xFE000000 -#define OMAP243X_GPMC_SIZE SZ_1M -#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE -#define OMAP243X_SDRC_VIRT 0xFD000000 -#define OMAP243X_SDRC_SIZE SZ_1M -#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE -#define OMAP243X_SMS_VIRT 0xFC000000 -#define OMAP243X_SMS_SIZE SZ_1M - -#endif - -#define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ - -/* DSP */ -#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_24XX_VIRT 0xe0000000 -#define DSP_MEM_24XX_SIZE 0x28000 -#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_24XX_VIRT 0xe1000000 -#define DSP_IPI_24XX_SIZE SZ_4K -#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_24XX_VIRT 0xe2000000 -#define DSP_MMU_24XX_SIZE SZ_4K - -#elif defined(CONFIG_ARCH_OMAP3) - -/* We map both L3 and L4 on OMAP3 */ -#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ -#define L3_34XX_VIRT 0xf8000000 -#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ - -#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ -#define L4_34XX_VIRT 0xd8000000 -#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ - -/* - * Need to look at the Size 4M for L4. - * VPOM3430 was not working for Int controller - */ - -#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ -#define L4_WK_34XX_VIRT 0xd8300000 -#define L4_WK_34XX_SIZE SZ_1M - -#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ -#define L4_PER_34XX_VIRT 0xd9000000 -#define L4_PER_34XX_SIZE SZ_1M - -#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ -#define L4_EMU_34XX_VIRT 0xe4000000 -#define L4_EMU_34XX_SIZE SZ_64M - -#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ -#define OMAP34XX_GPMC_VIRT 0xFE000000 -#define OMAP34XX_GPMC_SIZE SZ_1M - -#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ -#define OMAP343X_SMS_VIRT 0xFC000000 -#define OMAP343X_SMS_SIZE SZ_1M - -#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ -#define OMAP343X_SDRC_VIRT 0xFD000000 -#define OMAP343X_SDRC_SIZE SZ_1M - - -#define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ - -/* DSP */ -#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_34XX_VIRT 0xe0000000 -#define DSP_MEM_34XX_SIZE 0x28000 -#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_34XX_VIRT 0xe1000000 -#define DSP_IPI_34XX_SIZE SZ_4K -#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_34XX_VIRT 0xe2000000 -#define DSP_MMU_34XX_SIZE SZ_4K - -#endif - -#ifndef __ASSEMBLER__ - -/* - * Functions to access the OMAP IO region - * - * NOTE: - Use omap_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) -#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) -#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) - -#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) -#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) -#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) - -extern void omap1_map_common_io(void); -extern void omap1_init_common_hw(void); - -extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(void); - -#endif - -#endif diff --git a/include/asm-arm/arch-omap/irda.h b/include/asm-arm/arch-omap/irda.h deleted file mode 100644 index 96bb12fab43..00000000000 --- a/include/asm-arm/arch-omap/irda.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/irda.h - * - * Copyright (C) 2005-2006 Komal Shah - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_SEL 1 /* Selects IrDA */ -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 -#define IR_MIRMODE 8 - -struct omap_irda_config { - int transceiver_cap; - int (*transceiver_mode)(struct device *dev, int mode); - int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; - int rx_channel; - int tx_channel; - unsigned long dest_start; - unsigned long src_start; - int tx_trigger; - int rx_trigger; - int mode; -}; - -#endif diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h deleted file mode 100644 index afbf1e84646..00000000000 --- a/include/asm-arm/arch-omap/irqs.h +++ /dev/null @@ -1,332 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. - */ - -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_DMA_LCD 25 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ 0 -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-730 specific IRQ numbers for interrupt handler 1 - */ -#define INT_730_IH2_FIQ 0 -#define INT_730_IH2_IRQ 1 -#define INT_730_USB_NON_ISO 2 -#define INT_730_USB_ISO 3 -#define INT_730_ICR 4 -#define INT_730_EAC 5 -#define INT_730_GPIO_BANK1 6 -#define INT_730_GPIO_BANK2 7 -#define INT_730_GPIO_BANK3 8 -#define INT_730_McBSP2TX 10 -#define INT_730_McBSP2RX 11 -#define INT_730_McBSP2RX_OVF 12 -#define INT_730_LCD_LINE 14 -#define INT_730_GSM_PROTECT 15 -#define INT_730_TIMER3 16 -#define INT_730_GPIO_BANK5 17 -#define INT_730_GPIO_BANK6 18 -#define INT_730_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) - -/* - * OMAP-730 specific IRQ numbers for interrupt handler 2 - */ -#define INT_730_HW_ERRORS (0 + IH2_BASE) -#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_730_CFCD (2 + IH2_BASE) -#define INT_730_CFIREQ (3 + IH2_BASE) -#define INT_730_I2C (4 + IH2_BASE) -#define INT_730_PCC (5 + IH2_BASE) -#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_730_SPI_100K_1 (7 + IH2_BASE) -#define INT_730_SYREN_SPI (8 + IH2_BASE) -#define INT_730_VLYNQ (9 + IH2_BASE) -#define INT_730_GPIO_BANK4 (10 + IH2_BASE) -#define INT_730_McBSP1TX (11 + IH2_BASE) -#define INT_730_McBSP1RX (12 + IH2_BASE) -#define INT_730_McBSP1RX_OF (13 + IH2_BASE) -#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_730_UART_MODEM_1 (15 + IH2_BASE) -#define INT_730_MCSI (16 + IH2_BASE) -#define INT_730_uWireTX (17 + IH2_BASE) -#define INT_730_uWireRX (18 + IH2_BASE) -#define INT_730_SMC_CD (19 + IH2_BASE) -#define INT_730_SMC_IREQ (20 + IH2_BASE) -#define INT_730_HDQ_1WIRE (21 + IH2_BASE) -#define INT_730_TIMER32K (22 + IH2_BASE) -#define INT_730_MMC_SDIO (23 + IH2_BASE) -#define INT_730_UPLD (24 + IH2_BASE) -#define INT_730_USB_HHC_1 (27 + IH2_BASE) -#define INT_730_USB_HHC_2 (28 + IH2_BASE) -#define INT_730_USB_GENI (29 + IH2_BASE) -#define INT_730_USB_OTG (30 + IH2_BASE) -#define INT_730_CAMERA_IF (31 + IH2_BASE) -#define INT_730_RNG (32 + IH2_BASE) -#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_730_DBB_RF_EN (34 + IH2_BASE) -#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_730_SHA1_MD5 (36 + IH2_BASE) -#define INT_730_SPI_100K_2 (37 + IH2_BASE) -#define INT_730_RNG_IDLE (38 + IH2_BASE) -#define INT_730_MPUIO (39 + IH2_BASE) -#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_730_LLPC_VSYNC (43 + IH2_BASE) -#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_730_DMA_CH6 (53 + IH2_BASE) -#define INT_730_DMA_CH7 (54 + IH2_BASE) -#define INT_730_DMA_CH8 (55 + IH2_BASE) -#define INT_730_DMA_CH9 (56 + IH2_BASE) -#define INT_730_DMA_CH10 (57 + IH2_BASE) -#define INT_730_DMA_CH11 (58 + IH2_BASE) -#define INT_730_DMA_CH12 (59 + IH2_BASE) -#define INT_730_DMA_CH13 (60 + IH2_BASE) -#define INT_730_DMA_CH14 (61 + IH2_BASE) -#define INT_730_DMA_CH15 (62 + IH2_BASE) -#define INT_730_NAND (63 + IH2_BASE) - -#define INT_24XX_SYS_NIRQ 7 -#define INT_24XX_SDMA_IRQ0 12 -#define INT_24XX_SDMA_IRQ1 13 -#define INT_24XX_SDMA_IRQ2 14 -#define INT_24XX_SDMA_IRQ3 15 -#define INT_24XX_CAM_IRQ 24 -#define INT_24XX_DSS_IRQ 25 -#define INT_24XX_MAIL_U0_MPU 26 -#define INT_24XX_DSP_UMA 27 -#define INT_24XX_DSP_MMU 28 -#define INT_24XX_GPIO_BANK1 29 -#define INT_24XX_GPIO_BANK2 30 -#define INT_24XX_GPIO_BANK3 31 -#define INT_24XX_GPIO_BANK4 32 -#define INT_24XX_GPIO_BANK5 33 -#define INT_24XX_MAIL_U3_MPU 34 -#define INT_24XX_GPTIMER1 37 -#define INT_24XX_GPTIMER2 38 -#define INT_24XX_GPTIMER3 39 -#define INT_24XX_GPTIMER4 40 -#define INT_24XX_GPTIMER5 41 -#define INT_24XX_GPTIMER6 42 -#define INT_24XX_GPTIMER7 43 -#define INT_24XX_GPTIMER8 44 -#define INT_24XX_GPTIMER9 45 -#define INT_24XX_GPTIMER10 46 -#define INT_24XX_GPTIMER11 47 -#define INT_24XX_GPTIMER12 48 -#define INT_24XX_I2C1_IRQ 56 -#define INT_24XX_I2C2_IRQ 57 -#define INT_24XX_MCBSP1_IRQ_TX 59 -#define INT_24XX_MCBSP1_IRQ_RX 60 -#define INT_24XX_MCBSP2_IRQ_TX 62 -#define INT_24XX_MCBSP2_IRQ_RX 63 -#define INT_24XX_UART1_IRQ 72 -#define INT_24XX_UART2_IRQ 73 -#define INT_24XX_UART3_IRQ 74 -#define INT_24XX_USB_IRQ_GEN 75 -#define INT_24XX_USB_IRQ_NISO 76 -#define INT_24XX_USB_IRQ_ISO 77 -#define INT_24XX_USB_IRQ_HGEN 78 -#define INT_24XX_USB_IRQ_HSOF 79 -#define INT_24XX_USB_IRQ_OTG 80 -#define INT_24XX_MMC_IRQ 83 - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ -#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL4030_BASE_NR_IRQS 8 -#define TWL4030_PWR_NR_IRQS 8 -#else -#define TWL4030_BASE_NR_IRQS 0 -#define TWL4030_PWR_NR_IRQS 0 -#endif -#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) -#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END -#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) - -/* External TWL4030 gpio interrupts are optional */ -#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_TWL4030_GPIO -#define TWL4030_GPIO_NR_IRQS 18 -#else -#define TWL4030_GPIO_NR_IRQS 0 -#endif -#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) - -/* Total number of interrupts depends on the enabled blocks above */ -#define NR_IRQS TWL4030_GPIO_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#ifndef __ASSEMBLY__ -extern void omap_init_irq(void); -#endif - -#include - -#endif diff --git a/include/asm-arm/arch-omap/keypad.h b/include/asm-arm/arch-omap/keypad.h deleted file mode 100644 index b7f83075436..00000000000 --- a/include/asm-arm/arch-omap/keypad.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/keypad.h - * - * Copyright (C) 2006 Komal Shah - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_KEYPAD_H -#define ASMARM_ARCH_KEYPAD_H - -struct omap_kp_platform_data { - int rows; - int cols; - int *keymap; - unsigned int keymapsize; - unsigned int rep:1; - unsigned long delay; - unsigned int dbounce:1; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; -}; - -/* Group (0..3) -- when multiple keys are pressed, only the - * keys pressed in the same group are considered as pressed. This is - * in order to workaround certain crappy HW designs that produce ghost - * keypresses. */ -#define GROUP_0 (0 << 16) -#define GROUP_1 (1 << 16) -#define GROUP_2 (2 << 16) -#define GROUP_3 (3 << 16) -#define GROUP_MASK GROUP_3 - -#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) - -#endif - diff --git a/include/asm-arm/arch-omap/lcd_mipid.h b/include/asm-arm/arch-omap/lcd_mipid.h deleted file mode 100644 index f8fbc4801e5..00000000000 --- a/include/asm-arm/arch-omap/lcd_mipid.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __LCD_MIPID_H -#define __LCD_MIPID_H - -enum mipid_test_num { - MIPID_TEST_RGB_LINES, -}; - -enum mipid_test_result { - MIPID_TEST_SUCCESS, - MIPID_TEST_INVALID, - MIPID_TEST_FAILED, -}; - -#ifdef __KERNEL__ - -struct mipid_platform_data { - int nreset_gpio; - int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); -}; - -#endif - -#endif diff --git a/include/asm-arm/arch-omap/led.h b/include/asm-arm/arch-omap/led.h deleted file mode 100644 index f3acae28e2d..00000000000 --- a/include/asm-arm/arch-omap/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/include/asm-arm/arch-omap/mailbox.h b/include/asm-arm/arch-omap/mailbox.h deleted file mode 100644 index 7cbed9332e1..00000000000 --- a/include/asm-arm/arch-omap/mailbox.h +++ /dev/null @@ -1,73 +0,0 @@ -/* mailbox.h */ - -#ifndef MAILBOX_H -#define MAILBOX_H - -#include -#include -#include - -typedef u32 mbox_msg_t; -typedef void (mbox_receiver_t)(mbox_msg_t msg); -struct omap_mbox; - -typedef int __bitwise omap_mbox_irq_t; -#define IRQ_TX ((__force omap_mbox_irq_t) 1) -#define IRQ_RX ((__force omap_mbox_irq_t) 2) - -typedef int __bitwise omap_mbox_type_t; -#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) -#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) - -struct omap_mbox_ops { - omap_mbox_type_t type; - int (*startup)(struct omap_mbox *mbox); - void (*shutdown)(struct omap_mbox *mbox); - /* fifo */ - mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); - void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); - int (*fifo_empty)(struct omap_mbox *mbox); - int (*fifo_full)(struct omap_mbox *mbox); - /* irq */ - void (*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); -}; - -struct omap_mbox_queue { - spinlock_t lock; - struct request_queue *queue; - struct work_struct work; - int (*callback)(void *); - struct omap_mbox *mbox; -}; - -struct omap_mbox { - char *name; - unsigned int irq; - - struct omap_mbox_queue *txq, *rxq; - - struct omap_mbox_ops *ops; - - mbox_msg_t seq_snd, seq_rcv; - - struct device dev; - - struct omap_mbox *next; - void *priv; - - void (*err_notify)(void); -}; - -int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *); -void omap_mbox_init_seq(struct omap_mbox *); - -struct omap_mbox *omap_mbox_get(const char *); -void omap_mbox_put(struct omap_mbox *); - -int omap_mbox_register(struct omap_mbox *); -int omap_mbox_unregister(struct omap_mbox *); - -#endif /* MAILBOX_H */ diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h deleted file mode 100644 index 3da459a282b..00000000000 --- a/include/asm-arm/arch-omap/mcbsp.h +++ /dev/null @@ -1,380 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/mcbsp.h - * - * Defines for Multi-Channel Buffered Serial Port - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_OMAP_MCBSP_H -#define __ASM_ARCH_OMAP_MCBSP_H - -#include -#include - -#include -#include - -#define OMAP730_MCBSP1_BASE 0xfffb1000 -#define OMAP730_MCBSP2_BASE 0xfffb1800 - -#define OMAP1510_MCBSP1_BASE 0xe1011800 -#define OMAP1510_MCBSP2_BASE 0xfffb1000 -#define OMAP1510_MCBSP3_BASE 0xe1017000 - -#define OMAP1610_MCBSP1_BASE 0xe1011800 -#define OMAP1610_MCBSP2_BASE 0xfffb1000 -#define OMAP1610_MCBSP3_BASE 0xe1017000 - -#define OMAP24XX_MCBSP1_BASE 0x48074000 -#define OMAP24XX_MCBSP2_BASE 0x48076000 - -#define OMAP34XX_MCBSP1_BASE 0x48074000 -#define OMAP34XX_MCBSP2_BASE 0x49022000 - -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x02 -#define OMAP_MCBSP_REG_DXR2 0x04 -#define OMAP_MCBSP_REG_DXR1 0x06 -#define OMAP_MCBSP_REG_SPCR2 0x08 -#define OMAP_MCBSP_REG_SPCR1 0x0a -#define OMAP_MCBSP_REG_RCR2 0x0c -#define OMAP_MCBSP_REG_RCR1 0x0e -#define OMAP_MCBSP_REG_XCR2 0x10 -#define OMAP_MCBSP_REG_XCR1 0x12 -#define OMAP_MCBSP_REG_SRGR2 0x14 -#define OMAP_MCBSP_REG_SRGR1 0x16 -#define OMAP_MCBSP_REG_MCR2 0x18 -#define OMAP_MCBSP_REG_MCR1 0x1a -#define OMAP_MCBSP_REG_RCERA 0x1c -#define OMAP_MCBSP_REG_RCERB 0x1e -#define OMAP_MCBSP_REG_XCERA 0x20 -#define OMAP_MCBSP_REG_XCERB 0x22 -#define OMAP_MCBSP_REG_PCR0 0x24 -#define OMAP_MCBSP_REG_RCERC 0x26 -#define OMAP_MCBSP_REG_RCERD 0x28 -#define OMAP_MCBSP_REG_XCERC 0x2A -#define OMAP_MCBSP_REG_XCERD 0x2C -#define OMAP_MCBSP_REG_RCERE 0x2E -#define OMAP_MCBSP_REG_RCERF 0x30 -#define OMAP_MCBSP_REG_XCERE 0x32 -#define OMAP_MCBSP_REG_XCERF 0x34 -#define OMAP_MCBSP_REG_RCERG 0x36 -#define OMAP_MCBSP_REG_RCERH 0x38 -#define OMAP_MCBSP_REG_XCERG 0x3A -#define OMAP_MCBSP_REG_XCERH 0x3C - -#define OMAP_MAX_MCBSP_COUNT 3 -#define MAX_MCBSP_CLOCKS 3 - -#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP1 -#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX -#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX - -#elif defined(CONFIG_ARCH_OMAP24XX) - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x04 -#define OMAP_MCBSP_REG_DXR2 0x08 -#define OMAP_MCBSP_REG_DXR1 0x0C -#define OMAP_MCBSP_REG_SPCR2 0x10 -#define OMAP_MCBSP_REG_SPCR1 0x14 -#define OMAP_MCBSP_REG_RCR2 0x18 -#define OMAP_MCBSP_REG_RCR1 0x1C -#define OMAP_MCBSP_REG_XCR2 0x20 -#define OMAP_MCBSP_REG_XCR1 0x24 -#define OMAP_MCBSP_REG_SRGR2 0x28 -#define OMAP_MCBSP_REG_SRGR1 0x2C -#define OMAP_MCBSP_REG_MCR2 0x30 -#define OMAP_MCBSP_REG_MCR1 0x34 -#define OMAP_MCBSP_REG_RCERA 0x38 -#define OMAP_MCBSP_REG_RCERB 0x3C -#define OMAP_MCBSP_REG_XCERA 0x40 -#define OMAP_MCBSP_REG_XCERB 0x44 -#define OMAP_MCBSP_REG_PCR0 0x48 -#define OMAP_MCBSP_REG_RCERC 0x4C -#define OMAP_MCBSP_REG_RCERD 0x50 -#define OMAP_MCBSP_REG_XCERC 0x54 -#define OMAP_MCBSP_REG_XCERD 0x58 -#define OMAP_MCBSP_REG_RCERE 0x5C -#define OMAP_MCBSP_REG_RCERF 0x60 -#define OMAP_MCBSP_REG_XCERE 0x64 -#define OMAP_MCBSP_REG_XCERF 0x68 -#define OMAP_MCBSP_REG_RCERG 0x6C -#define OMAP_MCBSP_REG_RCERH 0x70 -#define OMAP_MCBSP_REG_XCERG 0x74 -#define OMAP_MCBSP_REG_XCERH 0x78 - -#define OMAP_MAX_MCBSP_COUNT 2 -#define MAX_MCBSP_CLOCKS 2 - -#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP2 -#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX -#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX - -#endif - -#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg) -#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg) - - -/************************** McBSP SPCR1 bit definitions ***********************/ -#define RRST 0x0001 -#define RRDY 0x0002 -#define RFULL 0x0004 -#define RSYNC_ERR 0x0008 -#define RINTM(value) ((value)<<4) /* bits 4:5 */ -#define ABIS 0x0040 -#define DXENA 0x0080 -#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ -#define RJUST(value) ((value)<<13) /* bits 13:14 */ -#define DLB 0x8000 - -/************************** McBSP SPCR2 bit definitions ***********************/ -#define XRST 0x0001 -#define XRDY 0x0002 -#define XEMPTY 0x0004 -#define XSYNC_ERR 0x0008 -#define XINTM(value) ((value)<<4) /* bits 4:5 */ -#define GRST 0x0040 -#define FRST 0x0080 -#define SOFT 0x0100 -#define FREE 0x0200 - -/************************** McBSP PCR bit definitions *************************/ -#define CLKRP 0x0001 -#define CLKXP 0x0002 -#define FSRP 0x0004 -#define FSXP 0x0008 -#define DR_STAT 0x0010 -#define DX_STAT 0x0020 -#define CLKS_STAT 0x0040 -#define SCLKME 0x0080 -#define CLKRM 0x0100 -#define CLKXM 0x0200 -#define FSRM 0x0400 -#define FSXM 0x0800 -#define RIOEN 0x1000 -#define XIOEN 0x2000 -#define IDLE_EN 0x4000 - -/************************** McBSP RCR1 bit definitions ************************/ -#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/************************** McBSP XCR1 bit definitions ************************/ -#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/*************************** McBSP RCR2 bit definitions ***********************/ -#define RDATDLY(value) (value) /* Bits 0:1 */ -#define RFIG 0x0004 -#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define RPHASE 0x8000 - -/*************************** McBSP XCR2 bit definitions ***********************/ -#define XDATDLY(value) (value) /* Bits 0:1 */ -#define XFIG 0x0004 -#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define XPHASE 0x8000 - -/************************* McBSP SRGR1 bit definitions ************************/ -#define CLKGDV(value) (value) /* Bits 0:7 */ -#define FWID(value) ((value)<<8) /* Bits 8:15 */ - -/************************* McBSP SRGR2 bit definitions ************************/ -#define FPER(value) (value) /* Bits 0:11 */ -#define FSGM 0x1000 -#define CLKSM 0x2000 -#define CLKSP 0x4000 -#define GSYNC 0x8000 - -/************************* McBSP MCR1 bit definitions *************************/ -#define RMCM 0x0001 -#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/************************* McBSP MCR2 bit definitions *************************/ -#define XMCM(value) (value) /* Bits 0:1 */ -#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ - - -/* we don't do multichannel for now */ -struct omap_mcbsp_reg_cfg { - u16 spcr2; - u16 spcr1; - u16 rcr2; - u16 rcr1; - u16 xcr2; - u16 xcr1; - u16 srgr2; - u16 srgr1; - u16 mcr2; - u16 mcr1; - u16 pcr0; - u16 rcerc; - u16 rcerd; - u16 xcerc; - u16 xcerd; - u16 rcere; - u16 rcerf; - u16 xcere; - u16 xcerf; - u16 rcerg; - u16 rcerh; - u16 xcerg; - u16 xcerh; -}; - -typedef enum { - OMAP_MCBSP1 = 0, - OMAP_MCBSP2, - OMAP_MCBSP3, -} omap_mcbsp_id; - -typedef int __bitwise omap_mcbsp_io_type_t; -#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) -#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) - -typedef enum { - OMAP_MCBSP_WORD_8 = 0, - OMAP_MCBSP_WORD_12, - OMAP_MCBSP_WORD_16, - OMAP_MCBSP_WORD_20, - OMAP_MCBSP_WORD_24, - OMAP_MCBSP_WORD_32, -} omap_mcbsp_word_length; - -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - -/* Platform specific configuration */ -struct omap_mcbsp_ops { - void (*request)(unsigned int); - void (*free)(unsigned int); - int (*check)(unsigned int); -}; - -struct omap_mcbsp_platform_data { - u32 virt_base; - u8 dma_rx_sync, dma_tx_sync; - u16 rx_irq, tx_irq; - struct omap_mcbsp_ops *ops; - char const *clk_name; -}; - -struct omap_mcbsp { - struct device *dev; - u32 io_base; - u8 id; - u8 free; - omap_mcbsp_word_length rx_word_length; - omap_mcbsp_word_length tx_word_length; - - omap_mcbsp_io_type_t io_type; /* IRQ or poll */ - /* IRQ based TX/RX */ - int rx_irq; - int tx_irq; - - /* DMA stuff */ - u8 dma_rx_sync; - short dma_rx_lch; - u8 dma_tx_sync; - short dma_tx_lch; - - /* Completion queues */ - struct completion tx_irq_completion; - struct completion rx_irq_completion; - struct completion tx_dma_completion; - struct completion rx_dma_completion; - - /* Protect the field .free, while checking if the mcbsp is in use */ - spinlock_t lock; - struct omap_mcbsp_platform_data *pdata; - struct clk *clk; -}; - -int omap_mcbsp_init(void); -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size); -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -int omap_mcbsp_request(unsigned int id); -void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id); -void omap_mcbsp_stop(unsigned int id); -void omap_mcbsp_xmit_word(unsigned int id, u32 word); -u32 omap_mcbsp_recv_word(unsigned int id); - -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - - -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); - -/* Polled read/write functions */ -int omap_mcbsp_pollread(unsigned int id, u16 * buf); -int omap_mcbsp_pollwrite(unsigned int id, u16 buf); - -#endif diff --git a/include/asm-arm/arch-omap/mcspi.h b/include/asm-arm/arch-omap/mcspi.h deleted file mode 100644 index 1254e4945b6..00000000000 --- a/include/asm-arm/arch-omap/mcspi.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _OMAP2_MCSPI_H -#define _OMAP2_MCSPI_H - -struct omap2_mcspi_platform_config { - unsigned short num_cs; -}; - -struct omap2_mcspi_device_config { - unsigned turbo_mode:1; - - /* Do we want one channel enabled at the same time? */ - unsigned single_channel:1; -}; - -#endif diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h deleted file mode 100644 index 14cba97c18a..00000000000 --- a/include/asm-arm/arch-omap/memory.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/memory.h - * - * Memory map for OMAP-1510 and 1610 - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#if defined(CONFIG_ARCH_OMAP1) -#define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) -#define PHYS_OFFSET UL(0x80000000) -#endif - -/* - * Conversion between SDRAM and fake PCI bus, used by USB - * NOTE: Physical address must be converted to Local Bus address - * on OMAP-1510 only - */ - -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - * Note that the is_lbus_device() test is not very efficient on 1510 - * because of the strncmp(). - */ -#ifdef CONFIG_ARCH_OMAP15XX - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - -#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) -#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0)) - -#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \ - (dma_addr_t)virt_to_lbus(page_address(page)) : \ - (dma_addr_t)__virt_to_bus(page_address(page));}) - -#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __bus_to_virt(addr);}) - -#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \ - virt_to_lbus(addr) : \ - __virt_to_bus(addr);}) - -#endif /* CONFIG_ARCH_OMAP15XX */ - -/* Override the ARM default */ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - -#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) -#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE -#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 -#endif - -#define CONSISTENT_DMA_SIZE \ - (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) - -#endif - -#endif - diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h deleted file mode 100644 index 69ed7ee4017..00000000000 --- a/include/asm-arm/arch-omap/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h deleted file mode 100644 index 7cfc5f25856..00000000000 --- a/include/asm-arm/arch-omap/mmc.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include -#include -#include - -#include - -#define OMAP_MMC_MAX_SLOTS 2 - -struct omap_mmc_platform_data { - struct omap_mmc_conf conf; - - /* number of slots on board */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (* switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (* init)(struct device *dev); - void (* cleanup)(struct device *dev); - void (* shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - struct omap_mmc_slot_data { - int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (* set_power)(struct device *dev, int slot, int power_on, int vdd); - int (* get_ro)(struct device *dev, int slot); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - open - * 1 - closed - */ - int (* get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (* card_detect)(int irq); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info); - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); - -#endif diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h deleted file mode 100644 index f4714b5270d..00000000000 --- a/include/asm-arm/arch-omap/mtd-xip.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions. - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Vladimir Barinov - * - * (c) 2005 MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express or - * implied. - */ - -#ifndef __ARCH_OMAP_MTD_XIP_H__ -#define __ARCH_OMAP_MTD_XIP_H__ - -#include -#define OMAP_MPU_TIMER_BASE (0xfffec500) -#define OMAP_MPU_TIMER_OFFSET 0x100 - -typedef struct { - u32 cntl; /* CNTL_TIMER, R/W */ - u32 load_tim; /* LOAD_TIM, W */ - u32 read_tim; /* READ_TIM, R */ -} xip_omap_mpu_timer_regs_t; - -#define xip_omap_mpu_timer_base(n) \ -((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ - (n)*OMAP_MPU_TIMER_OFFSET)) - -static inline unsigned long xip_omap_mpu_timer_read(int nr) -{ - volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr); - return timer->read_tim; -} - -#define xip_irqpending() \ - (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR)) -#define xip_currtime() (~xip_omap_mpu_timer_read(0)) - -/* - * It's permitted to do approxmation for xip_elapsed_since macro - * (see linux/mtd/xip.h) - */ - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 -#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7) -#else -#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6) -#endif - -/* - * xip_cpu_idle() is used when waiting for a delay equal or larger than - * the system timer tick period. This should put the CPU into idle mode - * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. - */ - -#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1)) - -#endif /* __ARCH_OMAP_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h deleted file mode 100644 index ff9a5b5575f..00000000000 --- a/include/asm-arm/arch-omap/mux.h +++ /dev/null @@ -1,615 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/mux.h - * - * Table of the Omap register configurations for the FUNC_MUX and - * PULL_DWN combinations. - * - * Copyright (C) 2004 - 2008 Texas Instruments Inc. - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: Please use the following naming style for new pin entries. - * For example, W8_1610_MMC2_DAT0, where: - * - W8 = ball - * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 - * - MMC2_DAT0 = function - */ - -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ -#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ - -#ifdef CONFIG_OMAP_MUX_DEBUG -#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ - .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ - .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ - .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#else - -#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#endif /* CONFIG_OMAP_MUX_DEBUG */ - -#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ - pull_reg, pull_bit, pull_status, \ - pu_pd_reg, pu_pd_status, debug_status) \ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG(mux_reg, mode_offset, mode) \ - PULL_REG(pull_reg, pull_bit, pull_status) \ - PU_PD_REG(pu_pd_reg, pu_pd_status) \ -}, - - -/* - * OMAP730 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and - * not the FUNC_MUX_CTRL_x regs from hardware.h - * - for pull-up/down, only has one enable bit which is is in the same register - * as mux config - */ -#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_730(mux_reg, mode_offset, mode) \ - PULL_REG_730(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - -#define MUX_CFG_24XX(desc, reg_offset, mode, \ - pull_en, pull_mode, dbg) \ -{ \ - .name = desc, \ - .debug = dbg, \ - .mux_reg = reg_offset, \ - .mask = mode, \ - .pull_val = pull_en, \ - .pu_pd_val = pull_mode, \ -}, - - -#define PULL_DISABLED 0 -#define PULL_ENABLED 1 - -#define PULL_DOWN 0 -#define PULL_UP 1 - -struct pin_config { - char *name; - unsigned char busy; - unsigned char debug; - - const char *mux_reg_name; - const unsigned int mux_reg; - const unsigned char mask_offset; - const unsigned char mask; - - const char *pull_name; - const unsigned int pull_reg; - const unsigned char pull_val; - const unsigned char pull_bit; - - const char *pu_pd_name; - const unsigned int pu_pd_reg; - const unsigned char pu_pd_val; -}; - -enum omap730_index { - /* OMAP 730 keyboard */ - E2_730_KBR0, - J7_730_KBR1, - E1_730_KBR2, - F3_730_KBR3, - D2_730_KBR4, - C2_730_KBC0, - D3_730_KBC1, - E4_730_KBC2, - F4_730_KBC3, - E3_730_KBC4, - - /* USB */ - AA17_730_USB_DM, - W16_730_USB_PU_EN, - W17_730_USB_VBUSI, -}; - -enum omap1xxx_index { - /* UART1 (BT_UART_GATING)*/ - UART1_TX = 0, - UART1_RTS, - - /* UART2 (COM_UART_GATING)*/ - UART2_TX, - UART2_RX, - UART2_CTS, - UART2_RTS, - - /* UART3 (GIGA_UART_GATING) */ - UART3_TX, - UART3_RX, - UART3_CTS, - UART3_RTS, - UART3_CLKREQ, - UART3_BCLK, /* 12MHz clock out */ - Y15_1610_UART3_RTS, - - /* PWT & PWL */ - PWT, - PWL, - - /* USB master generic */ - R18_USB_VBUS, - R18_1510_USB_GPIO0, - W4_USB_PUEN, - W4_USB_CLKO, - W4_USB_HIGHZ, - W4_GPIO58, - - /* USB1 master */ - USB1_SUSP, - USB1_SEO, - W13_1610_USB1_SE0, - USB1_TXEN, - USB1_TXD, - USB1_VP, - USB1_VM, - USB1_RCV, - USB1_SPEED, - R13_1610_USB1_SPEED, - R13_1710_USB1_SE0, - - /* USB2 master */ - USB2_SUSP, - USB2_VP, - USB2_TXEN, - USB2_VM, - USB2_RCV, - USB2_SEO, - USB2_TXD, - - /* OMAP-1510 GPIO */ - R18_1510_GPIO0, - R19_1510_GPIO1, - M14_1510_GPIO2, - - /* OMAP1610 GPIO */ - P18_1610_GPIO3, - Y15_1610_GPIO17, - - /* OMAP-1710 GPIO */ - R18_1710_GPIO0, - V2_1710_GPIO10, - N21_1710_GPIO14, - W15_1710_GPIO40, - - /* MPUIO */ - MPUIO2, - N15_1610_MPUIO2, - MPUIO4, - MPUIO5, - T20_1610_MPUIO5, - W11_1610_MPUIO6, - V10_1610_MPUIO7, - W11_1610_MPUIO9, - V10_1610_MPUIO10, - W10_1610_MPUIO11, - E20_1610_MPUIO13, - U20_1610_MPUIO14, - E19_1610_MPUIO15, - - /* MCBSP2 */ - MCBSP2_CLKR, - MCBSP2_CLKX, - MCBSP2_DR, - MCBSP2_DX, - MCBSP2_FSR, - MCBSP2_FSX, - - /* MCBSP3 */ - MCBSP3_CLKX, - - /* Misc ballouts */ - BALLOUT_V8_ARMIO3, - N20_HDQ, - - /* OMAP-1610 MMC2 */ - W8_1610_MMC2_DAT0, - V8_1610_MMC2_DAT1, - W15_1610_MMC2_DAT2, - R10_1610_MMC2_DAT3, - Y10_1610_MMC2_CLK, - Y8_1610_MMC2_CMD, - V9_1610_MMC2_CMDDIR, - V5_1610_MMC2_DATDIR0, - W19_1610_MMC2_DATDIR1, - R18_1610_MMC2_CLKIN, - - /* OMAP-1610 External Trace Interface */ - M19_1610_ETM_PSTAT0, - L15_1610_ETM_PSTAT1, - L18_1610_ETM_PSTAT2, - L19_1610_ETM_D0, - J19_1610_ETM_D6, - J18_1610_ETM_D7, - - /* OMAP16XX GPIO */ - P20_1610_GPIO4, - V9_1610_GPIO7, - W8_1610_GPIO9, - N20_1610_GPIO11, - N19_1610_GPIO13, - P10_1610_GPIO22, - V5_1610_GPIO24, - AA20_1610_GPIO_41, - W19_1610_GPIO48, - M7_1610_GPIO62, - V14_16XX_GPIO37, - R9_16XX_GPIO18, - L14_16XX_GPIO49, - - /* OMAP-1610 uWire */ - V19_1610_UWIRE_SCLK, - U18_1610_UWIRE_SDI, - W21_1610_UWIRE_SDO, - N14_1610_UWIRE_CS0, - P15_1610_UWIRE_CS3, - N15_1610_UWIRE_CS1, - - /* OMAP-1610 SPI */ - U19_1610_SPIF_SCK, - U18_1610_SPIF_DIN, - P20_1610_SPIF_DIN, - W21_1610_SPIF_DOUT, - R18_1610_SPIF_DOUT, - N14_1610_SPIF_CS0, - N15_1610_SPIF_CS1, - T19_1610_SPIF_CS2, - P15_1610_SPIF_CS3, - - /* OMAP-1610 Flash */ - L3_1610_FLASH_CS2B_OE, - M8_1610_FLASH_CS2B_WE, - - /* First MMC */ - MMC_CMD, - MMC_DAT1, - MMC_DAT2, - MMC_DAT0, - MMC_CLK, - MMC_DAT3, - - /* OMAP-1710 MMC CMDDIR and DATDIR0 */ - M15_1710_MMC_CLKI, - P19_1710_MMC_CMDDIR, - P20_1710_MMC_DATDIR0, - - /* OMAP-1610 USB0 alternate pin configuration */ - W9_USB0_TXEN, - AA9_USB0_VP, - Y5_USB0_RCV, - R9_USB0_VM, - V6_USB0_TXD, - W5_USB0_SE0, - V9_USB0_SPEED, - V9_USB0_SUSP, - - /* USB2 */ - W9_USB2_TXEN, - AA9_USB2_VP, - Y5_USB2_RCV, - R9_USB2_VM, - V6_USB2_TXD, - W5_USB2_SE0, - - /* 16XX UART */ - R13_1610_UART1_TX, - V14_16XX_UART1_RX, - R14_1610_UART1_CTS, - AA15_1610_UART1_RTS, - R9_16XX_UART2_RX, - L14_16XX_UART3_RX, - - /* I2C OMAP-1610 */ - I2C_SCL, - I2C_SDA, - - /* Keypad */ - F18_1610_KBC0, - D20_1610_KBC1, - D19_1610_KBC2, - E18_1610_KBC3, - C21_1610_KBC4, - G18_1610_KBR0, - F19_1610_KBR1, - H14_1610_KBR2, - E20_1610_KBR3, - E19_1610_KBR4, - N19_1610_KBR5, - - /* Power management */ - T20_1610_LOW_PWR, - - /* MCLK Settings */ - V5_1710_MCLK_ON, - V5_1710_MCLK_OFF, - R10_1610_MCLK_ON, - R10_1610_MCLK_OFF, - - /* CompactFlash controller */ - P11_1610_CF_CD2, - R11_1610_CF_IOIS16, - V10_1610_CF_IREQ, - W10_1610_CF_RESET, - W11_1610_CF_CD1, - - /* parallel camera */ - J15_1610_CAM_LCLK, - J18_1610_CAM_D7, - J19_1610_CAM_D6, - J14_1610_CAM_D5, - K18_1610_CAM_D4, - K19_1610_CAM_D3, - K15_1610_CAM_D2, - K14_1610_CAM_D1, - L19_1610_CAM_D0, - L18_1610_CAM_VS, - L15_1610_CAM_HS, - M19_1610_CAM_RSTZ, - Y15_1610_CAM_OUTCLK, - - /* serial camera */ - H19_1610_CAM_EXCLK, - Y12_1610_CCP_CLKP, - W13_1610_CCP_CLKM, - W14_1610_CCP_DATAP, - Y14_1610_CCP_DATAM, - -}; - -enum omap24xx_index { - /* 24xx I2C */ - M19_24XX_I2C1_SCL, - L15_24XX_I2C1_SDA, - J15_24XX_I2C2_SCL, - H19_24XX_I2C2_SDA, - - /* 24xx Menelaus interrupt */ - W19_24XX_SYS_NIRQ, - - /* 24xx clock */ - W14_24XX_SYS_CLKOUT, - - /* 24xx GPMC chipselects, wait pin monitoring */ - E2_GPMC_NCS2, - L2_GPMC_NCS7, - L3_GPMC_WAIT0, - N7_GPMC_WAIT1, - M1_GPMC_WAIT2, - P1_GPMC_WAIT3, - - /* 242X McBSP */ - Y15_24XX_MCBSP2_CLKX, - R14_24XX_MCBSP2_FSX, - W15_24XX_MCBSP2_DR, - V15_24XX_MCBSP2_DX, - - /* 24xx GPIO */ - M21_242X_GPIO11, - P21_242X_GPIO12, - AA10_242X_GPIO13, - AA6_242X_GPIO14, - AA4_242X_GPIO15, - Y11_242X_GPIO16, - AA12_242X_GPIO17, - AA8_242X_GPIO58, - Y20_24XX_GPIO60, - W4__24XX_GPIO74, - N15_24XX_GPIO85, - M15_24XX_GPIO92, - P20_24XX_GPIO93, - P18_24XX_GPIO95, - M18_24XX_GPIO96, - L14_24XX_GPIO97, - J15_24XX_GPIO99, - V14_24XX_GPIO117, - P14_24XX_GPIO125, - - /* 242x DBG GPIO */ - V4_242X_GPIO49, - W2_242X_GPIO50, - U4_242X_GPIO51, - V3_242X_GPIO52, - V2_242X_GPIO53, - V6_242X_GPIO53, - T4_242X_GPIO54, - Y4_242X_GPIO54, - T3_242X_GPIO55, - U2_242X_GPIO56, - - /* 24xx external DMA requests */ - AA10_242X_DMAREQ0, - AA6_242X_DMAREQ1, - E4_242X_DMAREQ2, - G4_242X_DMAREQ3, - D3_242X_DMAREQ4, - E3_242X_DMAREQ5, - - /* UART3 */ - K15_24XX_UART3_TX, - K14_24XX_UART3_RX, - - /* MMC/SDIO */ - G19_24XX_MMC_CLKO, - H18_24XX_MMC_CMD, - F20_24XX_MMC_DAT0, - H14_24XX_MMC_DAT1, - E19_24XX_MMC_DAT2, - D19_24XX_MMC_DAT3, - F19_24XX_MMC_DAT_DIR0, - E20_24XX_MMC_DAT_DIR1, - F18_24XX_MMC_DAT_DIR2, - E18_24XX_MMC_DAT_DIR3, - G18_24XX_MMC_CMD_DIR, - H15_24XX_MMC_CLKI, - - /* Full speed USB */ - J20_24XX_USB0_PUEN, - J19_24XX_USB0_VP, - K20_24XX_USB0_VM, - J18_24XX_USB0_RCV, - K19_24XX_USB0_TXEN, - J14_24XX_USB0_SE0, - K18_24XX_USB0_DAT, - - N14_24XX_USB1_SE0, - W12_24XX_USB1_SE0, - P15_24XX_USB1_DAT, - R13_24XX_USB1_DAT, - W20_24XX_USB1_TXEN, - P13_24XX_USB1_TXEN, - V19_24XX_USB1_RCV, - V12_24XX_USB1_RCV, - - AA10_24XX_USB2_SE0, - Y11_24XX_USB2_DAT, - AA12_24XX_USB2_TXEN, - AA6_24XX_USB2_RCV, - AA4_24XX_USB2_TLLSE0, - - /* Keypad GPIO*/ - T19_24XX_KBR0, - R19_24XX_KBR1, - V18_24XX_KBR2, - M21_24XX_KBR3, - E5__24XX_KBR4, - M18_24XX_KBR5, - R20_24XX_KBC0, - M14_24XX_KBC1, - H19_24XX_KBC2, - V17_24XX_KBC3, - P21_24XX_KBC4, - L14_24XX_KBC5, - N19_24XX_KBC6, - - /* 24xx Menelaus Keypad GPIO */ - B3__24XX_KBR5, - AA4_24XX_KBC2, - B13_24XX_KBC6, - - /* 2430 USB */ - AD9_2430_USB0_PUEN, - Y11_2430_USB0_VP, - AD7_2430_USB0_VM, - AE7_2430_USB0_RCV, - AD4_2430_USB0_TXEN, - AF9_2430_USB0_SE0, - AE6_2430_USB0_DAT, - AD24_2430_USB1_SE0, - AB24_2430_USB1_RCV, - Y25_2430_USB1_TXEN, - AA26_2430_USB1_DAT, - - /* 2430 HS-USB */ - AD9_2430_USB0HS_DATA3, - Y11_2430_USB0HS_DATA4, - AD7_2430_USB0HS_DATA5, - AE7_2430_USB0HS_DATA6, - AD4_2430_USB0HS_DATA2, - AF9_2430_USB0HS_DATA0, - AE6_2430_USB0HS_DATA1, - AE8_2430_USB0HS_CLK, - AD8_2430_USB0HS_DIR, - AE5_2430_USB0HS_STP, - AE9_2430_USB0HS_NXT, - AC7_2430_USB0HS_DATA7, - - /* 2430 McBSP */ - AC10_2430_MCBSP2_FSX, - AD16_2430_MCBSP2_CLX, - AE13_2430_MCBSP2_DX, - AD13_2430_MCBSP2_DR, - AC10_2430_MCBSP2_FSX_OFF, - AD16_2430_MCBSP2_CLX_OFF, - AE13_2430_MCBSP2_DX_OFF, - AD13_2430_MCBSP2_DR_OFF, - -}; - -struct omap_mux_cfg { - struct pin_config *pins; - unsigned long size; - int (*cfg_reg)(const struct pin_config *cfg); -}; - -#ifdef CONFIG_OMAP_MUX -/* setup pin muxing in Linux */ -extern int omap1_mux_init(void); -extern int omap2_mux_init(void); -extern int omap_mux_register(struct omap_mux_cfg *); -extern int omap_cfg_reg(unsigned long reg_cfg); -#else -/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ -static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } -static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } -#endif - -#endif diff --git a/include/asm-arm/arch-omap/nand.h b/include/asm-arm/arch-omap/nand.h deleted file mode 100644 index 17ae26e3535..00000000000 --- a/include/asm-arm/arch-omap/nand.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-arm/arch-omap/nand.h - * - * Copyright (C) 2006 Micron Technology Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -struct omap_nand_platform_data { - unsigned int options; - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*nand_setup)(void __iomem *); - int (*dev_ready)(struct omap_nand_platform_data *); - int dma_channel; - void __iomem *gpmc_cs_baseaddr; - void __iomem *gpmc_baseaddr; -}; diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/include/asm-arm/arch-omap/omap-alsa.h deleted file mode 100644 index faa0ed23d4b..00000000000 --- a/include/asm-arm/arch-omap/omap-alsa.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/omap-alsa.h - * - * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards. - * - * Copyright (C) 2006 Mika Laitio - * - * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil - * Written by Daniel Petrini, David Cohen, Anderson Briglia - * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History - * ------- - * - * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk, - * original version based in sa1100 driver - * and omap oss driver. - */ - -#ifndef __OMAP_ALSA_H -#define __OMAP_ALSA_H - -#include -#include -#include -#include -#include - -#define DMA_BUF_SIZE (1024 * 8) - -/* - * Buffer management for alsa and dma - */ -struct audio_stream { - char *id; /* identification string */ - int stream_id; /* numeric identification */ - int dma_dev; /* dma number of that device */ - int *lch; /* Chain of channels this stream is linked to */ - char started; /* to store if the chain was started or not */ - int dma_q_head; /* DMA Channel Q Head */ - int dma_q_tail; /* DMA Channel Q Tail */ - char dma_q_count; /* DMA Channel Q Count */ - int active:1; /* we are using this stream for transfer now */ - int period; /* current transfer period */ - int periods; /* current count of periods registerd in the DMA engine */ - spinlock_t dma_lock; /* for locking in DMA operations */ - struct snd_pcm_substream *stream; /* the pcm stream */ - unsigned linked:1; /* dma channels linked */ - int offset; /* store start position of the last period in the alsa buffer */ - int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */ - int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */ -}; - -/* - * Alsa card structure for aic23 - */ -struct snd_card_omap_codec { - struct snd_card *card; - struct snd_pcm *pcm; - long samplerate; - struct audio_stream s[2]; /* playback & capture */ -}; - -/* Codec specific information and function pointers. - * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c) - * are responsible for defining the function pointers. - */ -struct omap_alsa_codec_config { - char *name; - struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa; - struct snd_pcm_hw_constraint_list *hw_constraints_rates; - struct snd_pcm_hardware *snd_omap_alsa_playback; - struct snd_pcm_hardware *snd_omap_alsa_capture; - void (*codec_configure_dev)(void); - void (*codec_set_samplerate)(long); - void (*codec_clock_setup)(void); - int (*codec_clock_on)(void); - int (*codec_clock_off)(void); - int (*get_default_samplerate)(void); -}; - -/*********** Mixer function prototypes *************************/ -int snd_omap_mixer(struct snd_card_omap_codec *); -void snd_omap_init_mixer(void); - -#ifdef CONFIG_PM -void snd_omap_suspend_mixer(void); -void snd_omap_resume_mixer(void); -#endif - -int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config); -int snd_omap_alsa_remove(struct platform_device *pdev); -#ifdef CONFIG_PM -int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state); -int snd_omap_alsa_resume(struct platform_device *pdev); -#else -#define snd_omap_alsa_suspend NULL -#define snd_omap_alsa_resume NULL -#endif - -void callback_omap_alsa_sound_dma(void *); - -#endif diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h deleted file mode 100644 index c575d354850..00000000000 --- a/include/asm-arm/arch-omap/omap1510.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/include/asm-arm/arch-omap/omap1510.h - * - * Hardware definitions for TI OMAP1510 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP15XX_H -#define __ASM_ARCH_OMAP15XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP1510_DSP_BASE 0xE0000000 -#define OMAP1510_DSP_SIZE 0x28000 -#define OMAP1510_DSP_START 0xE0000000 - -#define OMAP1510_DSPREG_BASE 0xE1000000 -#define OMAP1510_DSPREG_SIZE SZ_128K -#define OMAP1510_DSPREG_START 0xE1000000 - -#endif /* __ASM_ARCH_OMAP15XX_H */ - diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h deleted file mode 100644 index f7f5cdfdccc..00000000000 --- a/include/asm-arm/arch-omap/omap16xx.h +++ /dev/null @@ -1,197 +0,0 @@ -/* linux/include/asm-arm/arch-omap/omap16xx.h - * - * Hardware definitions for TI OMAP1610/5912/1710 processors. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP16XX_H -#define __ASM_ARCH_OMAP16XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP16XX_DSP_BASE 0xE0000000 -#define OMAP16XX_DSP_SIZE 0x28000 -#define OMAP16XX_DSP_START 0xE0000000 - -#define OMAP16XX_DSPREG_BASE 0xE1000000 -#define OMAP16XX_DSPREG_SIZE SZ_128K -#define OMAP16XX_DSPREG_START 0xE1000000 - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#define OMAP_IH2_0_BASE (0xfffe0000) -#define OMAP_IH2_1_BASE (0xfffe0100) -#define OMAP_IH2_2_BASE (0xfffe0200) -#define OMAP_IH2_3_BASE (0xfffe0300) - -#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) -#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) -#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) -#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) -#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) -#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) -#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) - -#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) -#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) -#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) -#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) -#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) -#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) -#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) - -#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) -#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) -#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) -#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) -#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) -#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) -#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) - -#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) -#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) -#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) -#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) -#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) -#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) -#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -/* - * ---------------------------------------------------------------------------- - * Pin configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) -#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP1610_RESET_CONTROL 0xfffe1140 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_SWITCH_BASE (0xfffbc800) -#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) - -/* UART3 Registers Maping through MPU bus */ -#define UART3_RHR (OMAP_UART3_BASE + 0) -#define UART3_THR (OMAP_UART3_BASE + 0) -#define UART3_DLL (OMAP_UART3_BASE + 0) -#define UART3_IER (OMAP_UART3_BASE + 4) -#define UART3_DLH (OMAP_UART3_BASE + 4) -#define UART3_IIR (OMAP_UART3_BASE + 8) -#define UART3_FCR (OMAP_UART3_BASE + 8) -#define UART3_EFR (OMAP_UART3_BASE + 8) -#define UART3_LCR (OMAP_UART3_BASE + 0x0C) -#define UART3_MCR (OMAP_UART3_BASE + 0x10) -#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10) -#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14) -#define UART3_LSR (OMAP_UART3_BASE + 0x14) -#define UART3_TCR (OMAP_UART3_BASE + 0x18) -#define UART3_MSR (OMAP_UART3_BASE + 0x18) -#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18) -#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C) -#define UART3_SPR (OMAP_UART3_BASE + 0x1C) -#define UART3_TLR (OMAP_UART3_BASE + 0x1C) -#define UART3_MDR1 (OMAP_UART3_BASE + 0x20) -#define UART3_MDR2 (OMAP_UART3_BASE + 0x24) -#define UART3_SFLSR (OMAP_UART3_BASE + 0x28) -#define UART3_TXFLL (OMAP_UART3_BASE + 0x28) -#define UART3_RESUME (OMAP_UART3_BASE + 0x2C) -#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C) -#define UART3_SFREGL (OMAP_UART3_BASE + 0x30) -#define UART3_RXFLL (OMAP_UART3_BASE + 0x30) -#define UART3_SFREGH (OMAP_UART3_BASE + 0x34) -#define UART3_RXFLH (OMAP_UART3_BASE + 0x34) -#define UART3_BLR (OMAP_UART3_BASE + 0x38) -#define UART3_ACREG (OMAP_UART3_BASE + 0x3C) -#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C) -#define UART3_SCR (OMAP_UART3_BASE + 0x40) -#define UART3_SSR (OMAP_UART3_BASE + 0x44) -#define UART3_EBLR (OMAP_UART3_BASE + 0x48) -#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C) -#define UART3_MVR (OMAP_UART3_BASE + 0x50) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* 32-bit Watchdog timer in OMAP 16XX */ -#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) -#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) -#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) -#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) -#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) -#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) -#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) -#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) -#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) -#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) - -#define WCLR_PRE_SHIFT 5 -#define WCLR_PTV_SHIFT 2 - -#define WWPS_W_PEND_WSPR (1 << 4) -#define WWPS_W_PEND_WTGR (1 << 3) -#define WWPS_W_PEND_WLDR (1 << 2) -#define WWPS_W_PEND_WCRR (1 << 1) -#define WWPS_W_PEND_WCLR (1 << 0) - -#define WSPR_ENABLE_0 (0x0000bbbb) -#define WSPR_ENABLE_1 (0x00004444) -#define WSPR_DISABLE_0 (0x0000aaaa) -#define WSPR_DISABLE_1 (0x00005555) - -/* Mailbox */ -#define OMAP16XX_MAILBOX_BASE (0xfffcf000) - -#endif /* __ASM_ARCH_OMAP16XX_H */ - diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h deleted file mode 100644 index b9fcaae287c..00000000000 --- a/include/asm-arm/arch-omap/omap24xx.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * include/asm-arm/arch-omap/omap24xx.h - * - * This file contains the processor specific definitions - * of the TI OMAP24XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP24XX_H -#define __ASM_ARCH_OMAP24XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. Note also that some of these defines are needed - * for omap1 to compile without adding ifdefs. - */ - -#define L4_24XX_BASE 0x48000000 -#define L4_WK_243X_BASE 0x49000000 -#define L3_24XX_BASE 0x68000000 - -/* interrupt controller */ -#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) -#define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 - -#define OMAP2420_CTRL_BASE L4_24XX_BASE -#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) -#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_PRM_BASE OMAP2420_CM_BASE -#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) -#define OMAP2420_SMS_BASE 0x68008000 - -#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) -#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_PRM_BASE OMAP2430_CM_BASE - -#define OMAP243X_SMS_BASE 0x6C000000 -#define OMAP243X_SDRC_BASE 0x6D000000 -#define OMAP243X_GPMC_BASE 0x6E000000 -#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) -#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE -#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) - -/* DSP SS */ -#define OMAP2420_DSP_BASE 0x58000000 -#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) -#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) -#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) - -#define OMAP243X_DSP_BASE 0x5C000000 -#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) -#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) - -/* Mailbox */ -#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) - -/* Camera */ -#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) - -/* Security */ -#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) -#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) -#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) -#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) -#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) -#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) - -#if defined(CONFIG_ARCH_OMAP2420) - -#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE -#define OMAP2_CM_BASE OMAP2420_CM_BASE -#define OMAP2_PRM_BASE OMAP2420_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#elif defined(CONFIG_ARCH_OMAP2430) - -#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE -#define OMAP2_CM_BASE OMAP2430_CM_BASE -#define OMAP2_PRM_BASE OMAP2430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#endif - -#endif /* __ASM_ARCH_OMAP24XX_H */ - diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h deleted file mode 100644 index aa30c6d10ab..00000000000 --- a/include/asm-arm/arch-omap/omap34xx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * include/asm-arm/arch-omap/omap34xx.h - * - * This file contains the processor specific definitions of the TI OMAP34XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_OMAP34XX_H -#define __ASM_ARCH_OMAP34XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. - */ - -#define L4_34XX_BASE 0x48000000 -#define L4_WK_34XX_BASE 0x48300000 -#define L4_WK_OMAP_BASE L4_WK_34XX_BASE -#define L4_PER_34XX_BASE 0x49000000 -#define L4_PER_OMAP_BASE L4_PER_34XX_BASE -#define L4_EMU_34XX_BASE 0x54000000 -#define L4_EMU_BASE L4_EMU_34XX_BASE -#define L3_34XX_BASE 0x68000000 -#define L3_OMAP_BASE L3_34XX_BASE - -#define OMAP3430_32KSYNCT_BASE 0x48320000 -#define OMAP3430_CM_BASE 0x48004800 -#define OMAP3430_PRM_BASE 0x48306800 -#define OMAP343X_SMS_BASE 0x6C000000 -#define OMAP343X_SDRC_BASE 0x6D000000 -#define OMAP34XX_GPMC_BASE 0x6E000000 -#define OMAP343X_SCM_BASE 0x48002000 -#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE - -#define OMAP34XX_IC_BASE 0x48200000 -#define OMAP34XX_IVA_INTC_BASE 0x40000000 -#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) -#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) -#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) - - -#if defined(CONFIG_ARCH_OMAP3430) - -#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE -#define OMAP2_CM_BASE OMAP3430_CM_BASE -#define OMAP2_PRM_BASE OMAP3430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) - -#endif - -#define OMAP34XX_DSP_BASE 0x58000000 -#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) -#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) -#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000) -#endif /* __ASM_ARCH_OMAP34XX_H */ - diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h deleted file mode 100644 index 755b64c5e9f..00000000000 --- a/include/asm-arm/arch-omap/omap730.h +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/include/asm-arm/arch-omap/omap730.h - * - * Hardware definitions for TI OMAP730 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP730_H -#define __ASM_ARCH_OMAP730_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP730_DSP_BASE 0xE0000000 -#define OMAP730_DSP_SIZE 0x50000 -#define OMAP730_DSP_START 0xE0000000 - -#define OMAP730_DSPREG_BASE 0xE1000000 -#define OMAP730_DSPREG_SIZE SZ_128K -#define OMAP730_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_CONFIG_BASE 0xfffe1000 -#define OMAP730_IO_CONF_0 0xfffe1070 -#define OMAP730_IO_CONF_1 0xfffe1074 -#define OMAP730_IO_CONF_2 0xfffe1078 -#define OMAP730_IO_CONF_3 0xfffe107c -#define OMAP730_IO_CONF_4 0xfffe1080 -#define OMAP730_IO_CONF_5 0xfffe1084 -#define OMAP730_IO_CONF_6 0xfffe1088 -#define OMAP730_IO_CONF_7 0xfffe108c -#define OMAP730_IO_CONF_8 0xfffe1090 -#define OMAP730_IO_CONF_9 0xfffe1094 -#define OMAP730_IO_CONF_10 0xfffe1098 -#define OMAP730_IO_CONF_11 0xfffe109c -#define OMAP730_IO_CONF_12 0xfffe10a0 -#define OMAP730_IO_CONF_13 0xfffe10a4 - -#define OMAP730_MODE_1 0xfffe1010 -#define OMAP730_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP730_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_FLASH_CFG_0 0xfffecc10 -#define OMAP730_FLASH_ACFG_0 0xfffecc50 -#define OMAP730_FLASH_CFG_1 0xfffecc14 -#define OMAP730_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_ICR_BASE 0xfffbb800 -#define OMAP730_DSP_M_CTL 0xfffbb804 -#define OMAP730_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP730_H */ - diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h deleted file mode 100644 index 46d7a4f6085..00000000000 --- a/include/asm-arm/arch-omap/omapfb.h +++ /dev/null @@ -1,395 +0,0 @@ -/* - * File: include/asm-arm/arch-omap/omapfb.h - * - * Framebuffer driver for TI OMAP boards - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAPFB_H -#define __OMAPFB_H - -#include -#include - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_EVENT_READY 1 -#define OMAPFB_EVENT_DISABLED 2 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; - -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 reserved1; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -#include - -#define OMAP_LCDC_INV_VSYNC 0x0001 -#define OMAP_LCDC_INV_HSYNC 0x0002 -#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 -#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 -#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 -#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 - -#define OMAP_LCDC_SIGNAL_MASK 0x003f - -#define OMAP_LCDC_PANEL_TFT 0x0100 - -#define OMAPFB_PLANE_XRES_MIN 8 -#define OMAPFB_PLANE_YRES_MIN 8 - -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_device; - -struct lcd_panel { - const char *name; - int config; /* TFT/STN, signal inversion */ - int bpp; /* Pixel format in fb mem */ - int data_lines; /* Lines on LCD HW interface */ - - int x_res, y_res; - int pixel_clock; /* In kHz */ - int hsw; /* Horizontal synchronization - pulse width */ - int hfp; /* Horizontal front porch */ - int hbp; /* Horizontal back porch */ - int vsw; /* Vertical synchronization - pulse width */ - int vfp; /* Vertical front porch */ - int vbp; /* Vertical back porch */ - int acb; /* ac-bias pin frequency */ - int pcd; /* pixel clock divider. - Obsolete use pixel_clock instead */ - - int (*init) (struct lcd_panel *panel, - struct omapfb_device *fbdev); - void (*cleanup) (struct lcd_panel *panel); - int (*enable) (struct lcd_panel *panel); - void (*disable) (struct lcd_panel *panel); - unsigned long (*get_caps) (struct lcd_panel *panel); - int (*set_bklight_level)(struct lcd_panel *panel, - unsigned int level); - unsigned int (*get_bklight_level)(struct lcd_panel *panel); - unsigned int (*get_bklight_max) (struct lcd_panel *panel); - int (*run_test) (struct lcd_panel *panel, int test_num); -}; - -struct extif_timings { - int cs_on_time; - int cs_off_time; - int we_on_time; - int we_off_time; - int re_on_time; - int re_off_time; - int we_cycle_time; - int re_cycle_time; - int cs_pulse_width; - int access_time; - - int clk_div; - - u32 tim[5]; /* set by extif->convert_timings */ - - int converted; -}; - -struct lcd_ctrl_extif { - int (*init) (struct omapfb_device *fbdev); - void (*cleanup) (void); - void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); - unsigned long (*get_max_tx_rate)(void); - int (*convert_timings) (struct extif_timings *timings); - void (*set_timings) (const struct extif_timings *timings); - void (*set_bits_per_cycle)(int bpc); - void (*write_command) (const void *buf, unsigned int len); - void (*read_data) (void *buf, unsigned int len); - void (*write_data) (const void *buf, unsigned int len); - void (*transfer_area) (int width, int height, - void (callback)(void * data), void *data); - int (*setup_tearsync) (unsigned pin_cnt, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int div); - int (*enable_tearsync) (int enable, unsigned line); - - unsigned long max_transmit_size; -}; - -struct omapfb_notifier_block { - struct notifier_block nb; - void *data; - int plane_idx; -}; - -typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, - unsigned long event, - void *fbi); - -struct omapfb_mem_region { - dma_addr_t paddr; - void *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - -struct lcd_ctrl { - const char *name; - void *data; - - int (*init) (struct omapfb_device *fbdev, - int ext_mode, - struct omapfb_mem_desc *req_md); - void (*cleanup) (void); - void (*bind_client) (struct omapfb_notifier_block *nb); - void (*get_caps) (int plane, struct omapfb_caps *caps); - int (*set_update_mode)(enum omapfb_update_mode mode); - enum omapfb_update_mode (*get_update_mode)(void); - int (*setup_plane) (int plane, int channel_out, - unsigned long offset, - int screen_width, - int pos_x, int pos_y, int width, - int height, int color_mode); - int (*setup_mem) (int plane, size_t size, - int mem_type, unsigned long *paddr); - int (*mmap) (struct fb_info *info, - struct vm_area_struct *vma); - int (*set_scale) (int plane, - int orig_width, int orig_height, - int out_width, int out_height); - int (*enable_plane) (int plane, int enable); - int (*update_window) (struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - void (*sync) (void); - void (*suspend) (void); - void (*resume) (void); - int (*run_test) (int test_num); - int (*setcolreg) (u_int regno, u16 red, u16 green, - u16 blue, u16 transp, - int update_hw_mem); - int (*set_color_key) (struct omapfb_color_key *ck); - int (*get_color_key) (struct omapfb_color_key *ck); -}; - -enum omapfb_state { - OMAPFB_DISABLED = 0, - OMAPFB_SUSPENDED= 99, - OMAPFB_ACTIVE = 100 -}; - -struct omapfb_plane_struct { - int idx; - struct omapfb_plane_info info; - enum omapfb_color_format color_mode; - struct omapfb_device *fbdev; -}; - -struct omapfb_device { - int state; - int ext_lcdc; /* Using external - LCD controller */ - struct mutex rqueue_mutex; - - int palette_size; - u32 pseudo_palette[17]; - - struct lcd_panel *panel; /* LCD panel */ - struct lcd_ctrl *ctrl; /* LCD controller */ - struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ - struct lcd_ctrl_extif *ext_if; /* LCD ctrl external - interface */ - struct device *dev; - struct fb_var_screeninfo new_var; /* for mode changes */ - - struct omapfb_mem_desc mem_desc; - struct fb_info *fb_info[OMAPFB_PLANE_NUM]; -}; - -struct omapfb_platform_data { - struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; -}; - -#ifdef CONFIG_ARCH_OMAP1 -extern struct lcd_ctrl omap1_lcd_ctrl; -#else -extern struct lcd_ctrl omap2_disp_ctrl; -#endif - -extern void omapfb_register_panel(struct lcd_panel *panel); -extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); -extern void omapfb_notify_clients(struct omapfb_device *fbdev, - unsigned long event); -extern int omapfb_register_client(struct omapfb_notifier_block *nb, - omapfb_notifier_callback_t callback, - void *callback_data); -extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); -extern int omapfb_update_window_async(struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_ctrl_platform_data(void *pdata); - -#endif /* __KERNEL__ */ - -#endif /* __OMAPFB_H */ diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h deleted file mode 100644 index 6c959d0ce47..00000000000 --- a/include/asm-arm/arch-omap/onenand.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-omap/onenand.h - * - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *); - int dma_channel; -}; diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h deleted file mode 100644 index face9ad41e9..00000000000 --- a/include/asm-arm/arch-omap/param.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/param.h - * - */ - -#ifdef CONFIG_OMAP_32K_TIMER_HZ -#define HZ CONFIG_OMAP_32K_TIMER_HZ -#endif diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h deleted file mode 100644 index 14588059981..00000000000 --- a/include/asm-arm/arch-omap/pm.h +++ /dev/null @@ -1,356 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/pm.h - * - * Header file for OMAP Power Management Routines - * - * Author: MontaVista Software, Inc. - * support@mvista.com - * - * Copyright 2002 MontaVista Software Inc. - * - * Cleanup 2004 for Linux 2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_PM_H -#define __ASM_ARCH_OMAP_PM_H - -/* - * ---------------------------------------------------------------------------- - * Register and offset definitions to be used in PM assembler code - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00) -#define ARM_IDLECT1_ASM_OFFSET 0x04 -#define ARM_IDLECT2_ASM_OFFSET 0x08 - -#define TCMIF_ASM_BASE io_p2v(0xfffecc00) -#define EMIFS_CONFIG_ASM_OFFSET 0x0c -#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 - -/* - * ---------------------------------------------------------------------------- - * Power management bitmasks - * ---------------------------------------------------------------------------- - */ -#define IDLE_WAIT_CYCLES 0x00000fff -#define PERIPHERAL_ENABLE 0x2 - -#define SELF_REFRESH_MODE 0x0c000001 -#define IDLE_EMIFS_REQUEST 0xc -#define MODEM_32K_EN 0x1 -#define PER_EN 0x1 - -#define CPU_SUSPEND_SIZE 200 -#define ULPD_LOW_PWR_EN 0x0001 -#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010 -#define ULPD_SETUP_ANALOG_CELL_3_VAL 0 -#define ULPD_POWER_CTRL_REG_VAL 0x0219 - -#define DSP_IDLE_DELAY 10 -#define DSP_IDLE 0x0040 -#define DSP_RST 0x0004 -#define DSP_ENABLE 0x0002 -#define SUFFICIENT_DSP_RESET_TIME 1000 -#define DEFAULT_MPUI_CONFIG 0x05cf -#define ENABLE_XORCLK 0x2 -#define DSP_CLOCK_ENABLE 0x2000 -#define DSP_IDLE_MODE 0x2 -#define TC_IDLE_REQUEST (0x0000000c) - -#define IRQ_LEVEL2 (1<<0) -#define IRQ_KEYBOARD (1<<1) -#define IRQ_UART2 (1<<15) - -#define PDE_BIT 0x08 -#define PWD_EN_BIT 0x04 -#define EN_PERCK_BIT 0x04 - -#define OMAP1510_DEEP_SLEEP_REQUEST 0x0ec7 -#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5 -#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00 -#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2 - -/* Both big sleep and deep sleep use same values. Difference is in ULPD. */ -#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7 -#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP1610_IDLECT3_VAL 0x3f -#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c -#define OMAP1610_IDLECT3 0xfffece24 -#define OMAP1610_IDLE_LOOP_REQUEST 0x0400 - -#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP730_IDLECT3_VAL 0x3f -#define OMAP730_IDLECT3 0xfffece24 -#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 - -#if !defined(CONFIG_ARCH_OMAP730) && \ - !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) && \ - !defined(CONFIG_ARCH_OMAP24XX) -#error "Power management for this processor not implemented yet" -#endif - -#ifndef __ASSEMBLER__ - -#include - -extern void prevent_idle_sleep(void); -extern void allow_idle_sleep(void); - -/** - * clk_deny_idle - Prevents the clock from being idled during MPU idle - * @clk: clock signal handle - */ -void clk_deny_idle(struct clk *clk); - -/** - * clk_allow_idle - Counters previous clk_deny_idle - * @clk: clock signal handle - */ -void clk_deny_idle(struct clk *clk); - -extern void omap_pm_idle(void); -extern void omap_pm_suspend(void); -extern void omap730_cpu_suspend(unsigned short, unsigned short); -extern void omap1510_cpu_suspend(unsigned short, unsigned short); -extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision); -extern void omap730_idle_loop_suspend(void); -extern void omap1510_idle_loop_suspend(void); -extern void omap1610_idle_loop_suspend(void); -extern void omap24xx_idle_loop_suspend(void); - -extern unsigned int omap730_cpu_suspend_sz; -extern unsigned int omap1510_cpu_suspend_sz; -extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap24xx_cpu_suspend_sz; -extern unsigned int omap730_idle_loop_suspend_sz; -extern unsigned int omap1510_idle_loop_suspend_sz; -extern unsigned int omap1610_idle_loop_suspend_sz; -extern unsigned int omap24xx_idle_loop_suspend_sz; - -#ifdef CONFIG_OMAP_SERIAL_WAKE -extern void omap_serial_wake_trigger(int enable); -#else -#define omap_serial_wakeup_init() {} -#define omap_serial_wake_trigger(x) {} -#endif /* CONFIG_OMAP_SERIAL_WAKE */ - -#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x) -#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x)) -#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] - -#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x) -#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x)) -#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] - -#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x) -#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) -#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] - -#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) -#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] - -#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) -#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] - -#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) -#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] - -#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x -#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] -#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] - -/* - * List of global OMAP registers to preserve. - * More ones like CP and general purpose register values are preserved - * with the stack pointer in sleep.S. - */ - -enum arm_save_state { - ARM_SLEEP_SAVE_START = 0, - /* - * MPU control registers 32 bits - */ - ARM_SLEEP_SAVE_ARM_CKCTL, - ARM_SLEEP_SAVE_ARM_IDLECT1, - ARM_SLEEP_SAVE_ARM_IDLECT2, - ARM_SLEEP_SAVE_ARM_IDLECT3, - ARM_SLEEP_SAVE_ARM_EWUPCT, - ARM_SLEEP_SAVE_ARM_RSTCT1, - ARM_SLEEP_SAVE_ARM_RSTCT2, - ARM_SLEEP_SAVE_ARM_SYSST, - ARM_SLEEP_SAVE_SIZE -}; - -enum dsp_save_state { - DSP_SLEEP_SAVE_START = 0, - /* - * DSP registers 16 bits - */ - DSP_SLEEP_SAVE_DSP_IDLECT2, - DSP_SLEEP_SAVE_SIZE -}; - -enum ulpd_save_state { - ULPD_SLEEP_SAVE_START = 0, - /* - * ULPD registers 16 bits - */ - ULPD_SLEEP_SAVE_ULPD_IT_STATUS, - ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL, - ULPD_SLEEP_SAVE_ULPD_SOFT_REQ, - ULPD_SLEEP_SAVE_ULPD_STATUS_REQ, - ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL, - ULPD_SLEEP_SAVE_ULPD_POWER_CTRL, - ULPD_SLEEP_SAVE_SIZE -}; - -enum mpui1510_save_state { - MPUI1510_SLEEP_SAVE_START = 0, - /* - * MPUI registers 32 bits - */ - MPUI1510_SLEEP_SAVE_MPUI_CTRL, - MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI1510_SLEEP_SAVE_EMIFS_CONFIG, - MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR, -#if defined(CONFIG_ARCH_OMAP15XX) - MPUI1510_SLEEP_SAVE_SIZE -#else - MPUI1510_SLEEP_SAVE_SIZE = 0 -#endif -}; - -enum mpui730_save_state { - MPUI730_SLEEP_SAVE_START = 0, - /* - * MPUI registers 32 bits - */ - MPUI730_SLEEP_SAVE_MPUI_CTRL, - MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI730_SLEEP_SAVE_EMIFS_CONFIG, - MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) - MPUI730_SLEEP_SAVE_SIZE -#else - MPUI730_SLEEP_SAVE_SIZE = 0 -#endif -}; - -enum mpui1610_save_state { - MPUI1610_SLEEP_SAVE_START = 0, - /* - * MPUI registers 32 bits - */ - MPUI1610_SLEEP_SAVE_MPUI_CTRL, - MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI1610_SLEEP_SAVE_EMIFS_CONFIG, - MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR, -#if defined(CONFIG_ARCH_OMAP16XX) - MPUI1610_SLEEP_SAVE_SIZE -#else - MPUI1610_SLEEP_SAVE_SIZE = 0 -#endif -}; - -enum omap24xx_save_state { - OMAP24XX_SLEEP_SAVE_START = 0, - OMAP24XX_SLEEP_SAVE_INTC_MIR0, - OMAP24XX_SLEEP_SAVE_INTC_MIR1, - OMAP24XX_SLEEP_SAVE_INTC_MIR2, - - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM, - - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM, - - OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE, - OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_OE, - OMAP24XX_SLEEP_SAVE_GPIO4_OE, - OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT, - OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0, - OMAP24XX_SLEEP_SAVE_SIZE -}; - -#endif /* ASSEMBLER */ -#endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h deleted file mode 100644 index 7bcaf94bde9..00000000000 --- a/include/asm-arm/arch-omap/prcm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/prcm.h - * - * Access definations for use in OMAP24XX clock and power management - * - * Copyright (C) 2005 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_DPM_PRCM_H -#define __ASM_ARM_ARCH_DPM_PRCM_H - -u32 omap_prcm_get_reset_sources(void); - -#endif - - - - - diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h deleted file mode 100644 index 673b3965bef..00000000000 --- a/include/asm-arm/arch-omap/sdrc.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MR_0 0x084 -#define SDRC_RFR_CTRL_0 0x0a4 - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - - -#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -/* REVISIT: fill in other SMS registers here */ - -#endif diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h deleted file mode 100644 index 79a5297af9f..00000000000 --- a/include/asm-arm/arch-omap/serial.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/serial.h - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#if defined(CONFIG_ARCH_OMAP1) -/* OMAP1 serial ports */ -#define OMAP_UART1_BASE 0xfffb0000 -#define OMAP_UART2_BASE 0xfffb0800 -#define OMAP_UART3_BASE 0xfffb9800 -#elif defined(CONFIG_ARCH_OMAP2) -/* OMAP2 serial ports */ -#define OMAP_UART1_BASE 0x4806a000 -#define OMAP_UART2_BASE 0x4806c000 -#define OMAP_UART3_BASE 0x4806e000 -#endif - -#define OMAP_MAX_NR_PORTS 3 -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) - -#define is_omap_port(p) ({int __ret = 0; \ - if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ - p == IO_ADDRESS(OMAP_UART2_BASE) || \ - p == IO_ADDRESS(OMAP_UART3_BASE)) \ - __ret = 1; \ - __ret; \ - }) - -#endif diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h deleted file mode 100644 index be59f4a9828..00000000000 --- a/include/asm-arm/arch-omap/sram.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -extern int __init omap_sram_init(void); -extern void * omap_sram_push(void * start, unsigned long size); -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -#endif diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h deleted file mode 100644 index 176d9d6c258..00000000000 --- a/include/asm-arm/arch-omap/system.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copied from linux/include/asm-arm/arch-sa1100/system.h - * Copyright (c) 1999 Nicolas Pitre - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include - -#include -#include - -#ifndef CONFIG_MACH_VOICEBLUE -#define voiceblue_reset() do {} while (0) -#endif - -extern void omap_prcm_arch_reset(char mode); - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void omap1_arch_reset(char mode) -{ - /* - * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 - * "Global Software Reset Affects Traffic Controller Frequency". - */ - if (cpu_is_omap5912()) { - omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), - DPLL_CTL); - omap_writew(0x8, ARM_RSTCT1); - } - - if (machine_is_voiceblue()) - voiceblue_reset(); - else - omap_writew(1, ARM_RSTCT1); -} - -static inline void arch_reset(char mode) -{ - if (!cpu_is_omap24xx()) - omap1_arch_reset(mode); - else - omap_prcm_arch_reset(mode); -} - -#endif diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h deleted file mode 100644 index 65a9c82d3bf..00000000000 --- a/include/asm-arm/arch-omap/tc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/tc.h - * - * OMAP Traffic Controller - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_TC_H -#define __ASM_ARCH_TC_H - -#define TCMIF_BASE 0xfffecc00 -#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) -#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) -#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) -#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) -#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) -#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) -#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) -#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) -#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) -#define EMIFF_MRS (TCMIF_BASE + 0x24) -#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) -#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) -#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) -#define TC_ENDIANISM (TCMIF_BASE + 0x34) -#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) -#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) -#define EMIFS_ACS0 (TCMIF_BASE + 0x50) -#define EMIFS_ACS1 (TCMIF_BASE + 0x54) -#define EMIFS_ACS2 (TCMIF_BASE + 0x58) -#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) -#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) - -/* external EMIFS chipselect regions */ -#define OMAP_CS0_PHYS 0x00000000 -#define OMAP_CS0_SIZE SZ_64M - -#define OMAP_CS1_PHYS 0x04000000 -#define OMAP_CS1_SIZE SZ_64M - -#define OMAP_CS1A_PHYS OMAP_CS1_PHYS -#define OMAP_CS1A_SIZE SZ_32M - -#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) -#define OMAP_CS1B_SIZE SZ_32M - -#define OMAP_CS2_PHYS 0x08000000 -#define OMAP_CS2_SIZE SZ_64M - -#define OMAP_CS2A_PHYS OMAP_CS2_PHYS -#define OMAP_CS2A_SIZE SZ_32M - -#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) -#define OMAP_CS2B_SIZE SZ_32M - -#define OMAP_CS3_PHYS 0x0c000000 -#define OMAP_CS3_SIZE SZ_64M - -#ifndef __ASSEMBLER__ - -/* EMIF Slow Interface Configuration Register */ -#define OMAP_EMIFS_CONFIG_FR (1 << 4) -#define OMAP_EMIFS_CONFIG_PDE (1 << 3) -#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) -#define OMAP_EMIFS_CONFIG_BM (1 << 1) -#define OMAP_EMIFS_CONFIG_WP (1 << 0) - -#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) -#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) - -/* Almost all documentation for chip and board memory maps assumes - * BM is clear. Most devel boards have a switch to control booting - * from NOR flash (using external chipselect 3) rather than mask ROM, - * which uses BM to interchange the physical CS0 and CS3 addresses. - */ -static inline u32 omap_cs0_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? OMAP_CS3_PHYS : 0; -} - -static inline u32 omap_cs3_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? 0 : OMAP_CS3_PHYS; -} - -#endif /* __ASSEMBLER__ */ - -#endif /* __ASM_ARCH_TC_H */ diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h deleted file mode 100644 index 21f2e367185..00000000000 --- a/include/asm-arm/arch-omap/timex.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/timex.h - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -/* - * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer, - * and that's why the CLOCK_TICK_RATE is not 32768. - */ -#ifdef CONFIG_OMAP_32K_TIMER -#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ) -#else -#define CLOCK_TICK_RATE (HZ * 100000UL) -#endif - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h deleted file mode 100644 index aca0adfef1b..00000000000 --- a/include/asm-arm/arch-omap/uncompress.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Rewritten by: - * Author: - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include - -unsigned int system_rev; - -#define UART_OMAP_MDR1 0x08 /* mode definition register */ -#define OMAP_ID_730 0x355F -#define ID_MASK 0x7fff -#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) -#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK - -static void putc(int c) -{ - volatile u8 * uart = 0; - int shift = 2; - -#ifdef CONFIG_MACH_OMAP_PALMTE - return; -#endif - -#ifdef CONFIG_ARCH_OMAP -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - uart = (volatile u8 *)(OMAP_UART3_BASE); -#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) - uart = (volatile u8 *)(OMAP_UART2_BASE); -#else - uart = (volatile u8 *)(OMAP_UART1_BASE); -#endif - -#ifdef CONFIG_ARCH_OMAP1 - /* Determine which serial port to use */ - do { - /* MMU is not on, so cpu_is_omapXXXX() won't work here */ - unsigned int omap_id = omap_get_id(); - - if (omap_id == OMAP_ID_730) - shift = 0; - - if (check_port(uart, shift)) - break; - /* Silent boot if no serial ports are enabled. */ - return; - } while (0); -#endif /* CONFIG_ARCH_OMAP1 */ -#endif - - /* - * Now, xmit each character - */ - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h deleted file mode 100644 index ddf1861e6df..00000000000 --- a/include/asm-arm/arch-omap/usb.h +++ /dev/null @@ -1,141 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include - -/*-------------------------------------------------------------------------*/ - -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) - -#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h deleted file mode 100644 index 5b8bd8dae8b..00000000000 --- a/include/asm-arm/arch-omap/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S deleted file mode 100644 index 4f98f3ba292..00000000000 --- a/include/asm-arm/arch-orion5x/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/debug-macro.S - * - * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION5X_REGS_PHYS_BASE - ldrne \rx, =ORION5X_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-orion5x/dma.h b/include/asm-arm/arch-orion5x/dma.h deleted file mode 100644 index 40a8c178f10..00000000000 --- a/include/asm-arm/arch-orion5x/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S deleted file mode 100644 index d8ef54c0ee9..00000000000 --- a/include/asm-arm/arch-orion5x/entry-macro.S +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/entry-macro.S - * - * Low-level IRQ helper macros for Orion platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =MAIN_IRQ_CAUSE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #0] @ main cause - ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask - mov \irqnr, #0 @ default irqnr - @ find cause bits that are unmasked - ands \irqstat, \irqstat, \tmp @ clear Z flag if any - clzne \irqnr, \irqstat @ calc irqnr - rsbne \irqnr, \irqnr, #31 - .endm diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h deleted file mode 100644 index c85e498388b..00000000000 --- a/include/asm-arm/arch-orion5x/gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/gpio.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -extern int gpio_request(unsigned pin, const char *label); -extern void gpio_free(unsigned pin); -extern int gpio_direction_input(unsigned pin); -extern int gpio_direction_output(unsigned pin, int value); -extern int gpio_get_value(unsigned pin); -extern void gpio_set_value(unsigned pin, int value); -extern void orion5x_gpio_set_blink(unsigned pin, int blink); -extern void gpio_display(void); /* debug */ - -static inline int gpio_to_irq(int pin) -{ - return pin + IRQ_ORION5X_GPIO_START; -} - -static inline int irq_to_gpio(int irq) -{ - return irq - IRQ_ORION5X_GPIO_START; -} - -#include /* cansleep wrappers */ diff --git a/include/asm-arm/arch-orion5x/hardware.h b/include/asm-arm/arch-orion5x/hardware.h deleted file mode 100644 index 5d2d8e0b563..00000000000 --- a/include/asm-arm/arch-orion5x/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "orion5x.h" - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE - - -#endif diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h deleted file mode 100644 index 59f1bc96a23..00000000000 --- a/include/asm-arm/arch-orion5x/io.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/io.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "orion5x.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem * -__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) -{ - void __iomem *retval; - unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE; - if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE && - size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) { - retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs; - } else { - retval = __arm_ioremap(paddr, size, mtype); - } - - return retval; -} - -static inline void -__arch_iounmap(void __iomem *addr) -{ - if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE || - addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE)) - __iounmap(addr); -} - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) -#define __arch_iounmap(a) __arch_iounmap(a) -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -/***************************************************************************** - * Helpers to access Orion registers - ****************************************************************************/ -/* - * These are not preempt-safe. Locks, if needed, must be taken - * care of by the caller. - */ -#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r)) -#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r)) - - -#endif diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h deleted file mode 100644 index abdd61a4833..00000000000 --- a/include/asm-arm/arch-orion5x/irqs.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/irqs.h - * - * IRQ definitions for Orion SoC - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "orion5x.h" /* need GPIO_MAX */ - -/* - * Orion Main Interrupt Controller - */ -#define IRQ_ORION5X_BRIDGE 0 -#define IRQ_ORION5X_DOORBELL_H2C 1 -#define IRQ_ORION5X_DOORBELL_C2H 2 -#define IRQ_ORION5X_UART0 3 -#define IRQ_ORION5X_UART1 4 -#define IRQ_ORION5X_I2C 5 -#define IRQ_ORION5X_GPIO_0_7 6 -#define IRQ_ORION5X_GPIO_8_15 7 -#define IRQ_ORION5X_GPIO_16_23 8 -#define IRQ_ORION5X_GPIO_24_31 9 -#define IRQ_ORION5X_PCIE0_ERR 10 -#define IRQ_ORION5X_PCIE0_INT 11 -#define IRQ_ORION5X_USB1_CTRL 12 -#define IRQ_ORION5X_DEV_BUS_ERR 14 -#define IRQ_ORION5X_PCI_ERR 15 -#define IRQ_ORION5X_USB_BR_ERR 16 -#define IRQ_ORION5X_USB0_CTRL 17 -#define IRQ_ORION5X_ETH_RX 18 -#define IRQ_ORION5X_ETH_TX 19 -#define IRQ_ORION5X_ETH_MISC 20 -#define IRQ_ORION5X_ETH_SUM 21 -#define IRQ_ORION5X_ETH_ERR 22 -#define IRQ_ORION5X_IDMA_ERR 23 -#define IRQ_ORION5X_IDMA_0 24 -#define IRQ_ORION5X_IDMA_1 25 -#define IRQ_ORION5X_IDMA_2 26 -#define IRQ_ORION5X_IDMA_3 27 -#define IRQ_ORION5X_CESA 28 -#define IRQ_ORION5X_SATA 29 -#define IRQ_ORION5X_XOR0 30 -#define IRQ_ORION5X_XOR1 31 - -/* - * Orion General Purpose Pins - */ -#define IRQ_ORION5X_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-orion5x/memory.h b/include/asm-arm/arch-orion5x/memory.h deleted file mode 100644 index 80053a7afc7..00000000000 --- a/include/asm-arm/arch-orion5x/memory.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/memory.h - * - * Marvell Orion memory definitions - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h deleted file mode 100644 index 10257f5c5e9..00000000000 --- a/include/asm-arm/arch-orion5x/orion5x.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/orion5x.h - * - * Generic definitions of Orion SoC flavors: - * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2. - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_ORION5X_H -#define __ASM_ARCH_ORION5X_H - -/***************************************************************************** - * Orion Address Maps - * - * phys - * e0000000 PCIe MEM space - * e8000000 PCI MEM space - * f0000000 PCIe WA space (Orion-1/Orion-NAS only) - * f1000000 on-chip peripheral registers - * f2000000 PCIe I/O space - * f2100000 PCI I/O space - * f4000000 device bus mappings (boot) - * fa000000 device bus mappings (cs0) - * fa800000 device bus mappings (cs2) - * fc000000 device bus mappings (cs0/cs1) - * - * virt phys size - * fdd00000 f1000000 1M on-chip peripheral registers - * fde00000 f2000000 1M PCIe I/O space - * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) - ****************************************************************************/ -#define ORION5X_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_VIRT_BASE 0xfdd00000 -#define ORION5X_REGS_SIZE SZ_1M - -#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 -#define ORION5X_PCIE_IO_BUS_BASE 0x00000000 -#define ORION5X_PCIE_IO_SIZE SZ_1M - -#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 -#define ORION5X_PCI_IO_BUS_BASE 0x00100000 -#define ORION5X_PCI_IO_SIZE SZ_1M - -/* Relevant only for Orion-1/Orion-NAS */ -#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 -#define ORION5X_PCIE_WA_SIZE SZ_16M - -#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 -#define ORION5X_PCIE_MEM_SIZE SZ_128M - -#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 -#define ORION5X_PCI_MEM_SIZE SZ_128M - -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 - -/******************************************************************************* - * Orion Registers Map - ******************************************************************************/ -#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) - -#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) -#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) -#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) -#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) - -#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - -#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) - -#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) -#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) - -#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) -#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) -#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) - -#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) -#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) -#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) - -#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) -#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) -#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) - -#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) -#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) -#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) - -/******************************************************************************* - * Device Bus Registers - ******************************************************************************/ -#define MPP_0_7_CTRL ORION5X_DEV_BUS_REG(0x000) -#define MPP_8_15_CTRL ORION5X_DEV_BUS_REG(0x004) -#define MPP_16_19_CTRL ORION5X_DEV_BUS_REG(0x050) -#define MPP_DEV_CTRL ORION5X_DEV_BUS_REG(0x008) -#define MPP_RESET_SAMPLE ORION5X_DEV_BUS_REG(0x010) -#define GPIO_OUT ORION5X_DEV_BUS_REG(0x100) -#define GPIO_IO_CONF ORION5X_DEV_BUS_REG(0x104) -#define GPIO_BLINK_EN ORION5X_DEV_BUS_REG(0x108) -#define GPIO_IN_POL ORION5X_DEV_BUS_REG(0x10c) -#define GPIO_DATA_IN ORION5X_DEV_BUS_REG(0x110) -#define GPIO_EDGE_CAUSE ORION5X_DEV_BUS_REG(0x114) -#define GPIO_EDGE_MASK ORION5X_DEV_BUS_REG(0x118) -#define GPIO_LEVEL_MASK ORION5X_DEV_BUS_REG(0x11c) -#define DEV_BANK_0_PARAM ORION5X_DEV_BUS_REG(0x45c) -#define DEV_BANK_1_PARAM ORION5X_DEV_BUS_REG(0x460) -#define DEV_BANK_2_PARAM ORION5X_DEV_BUS_REG(0x464) -#define DEV_BANK_BOOT_PARAM ORION5X_DEV_BUS_REG(0x46c) -#define DEV_BUS_CTRL ORION5X_DEV_BUS_REG(0x4c0) -#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) -#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) -#define GPIO_MAX 32 - -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION5X_BRIDGE_REG(0x100) -#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) -#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) -#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) - - -#endif diff --git a/include/asm-arm/arch-orion5x/system.h b/include/asm-arm/arch-orion5x/system.h deleted file mode 100644 index 3f1d1e2d38f..00000000000 --- a/include/asm-arm/arch-orion5x/system.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/system.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable and issue soft reset - */ - orion5x_setbits(CPU_RESET_MASK, (1 << 2)); - orion5x_setbits(CPU_SOFT_RESET, 1); -} - - -#endif diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h deleted file mode 100644 index 31c568e28cc..00000000000 --- a/include/asm-arm/arch-orion5x/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/timex.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define ORION5X_TCLK 166666667 diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h deleted file mode 100644 index 7548cedf2d7..00000000000 --- a/include/asm-arm/arch-orion5x/uncompress.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/uncompress.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h deleted file mode 100644 index 2b3061e90dc..00000000000 --- a/include/asm-arm/arch-orion5x/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/vmalloc.h - */ - -#define VMALLOC_END 0xfd800000 diff --git a/include/asm-arm/arch-pnx4008/clock.h b/include/asm-arm/arch-pnx4008/clock.h deleted file mode 100644 index ce155e16126..00000000000 --- a/include/asm-arm/arch-pnx4008/clock.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/clock.h - * - * Clock control driver for PNX4008 - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_CLOCK_H__ -#define __PNX4008_CLOCK_H__ - -struct module; -struct clk; - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40) -#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44) -#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48) -#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c) -#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50) -#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58) -#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64) -#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68) -#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80) -#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84) -#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90) -#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac) -#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0) -#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4) -#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8) -#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc) -#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4) -#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8) -#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0) -#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4) -#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8) -#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec) -#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc) - -#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE) -#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60) -#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64) -#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68) -#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C) - -#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4) - -#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE) - -#define CLK_RATE_13MHZ 13000 -#define CLK_RATE_1MHZ 1000 -#define CLK_RATE_208MHZ 208000 -#define CLK_RATE_48MHZ 48000 -#define CLK_RATE_32KHZ 32 - -#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */ - -#endif diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S deleted file mode 100644 index 67d18a203d2..00000000000 --- a/include/asm-arm/arch-pnx4008/debug-macro.S +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-pnx4008/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00090000 - addeq \rx, \rx, #0x40000000 - addne \rx, \rx, #0xf4000000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-pnx4008/dma.h b/include/asm-arm/arch-pnx4008/dma.h deleted file mode 100644 index 418f15283ff..00000000000 --- a/include/asm-arm/arch-pnx4008/dma.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/dma.h - * - * PNX4008 DMA header file - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "platform.h" - -#define MAX_DMA_ADDRESS 0xffffffff - -#define MAX_DMA_CHANNELS 8 - -#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE) -#define DMAC_INT_STAT (DMAC_BASE + 0x0000) -#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004) -#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008) -#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c) -#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010) -#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024) -#define DMAC_CONFIG (DMAC_BASE + 0x0030) -#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20) -#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20) -#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20) -#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20) -#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20) - -enum { - WIDTH_BYTE = 0, - WIDTH_HWORD, - WIDTH_WORD -}; - -enum { - FC_MEM2MEM_DMA, - FC_MEM2PER_DMA, - FC_PER2MEM_DMA, - FC_PER2PER_DMA, - FC_PER2PER_DPER, - FC_MEM2PER_PER, - FC_PER2MEM_PER, - FC_PER2PER_SPER -}; - -enum { - DMA_INT_UNKNOWN = 0, - DMA_ERR_INT = 1, - DMA_TC_INT = 2, -}; - -enum { - DMA_BUFFER_ALLOCATED = 1, - DMA_HAS_LL = 2, -}; - -enum { - PER_CAM_DMA_1 = 0, - PER_NDF_FLASH = 1, - PER_MBX_SLAVE_FIFO = 2, - PER_SPI2_REC_XMIT = 3, - PER_MS_SD_RX_XMIT = 4, - PER_HS_UART_1_XMIT = 5, - PER_HS_UART_1_RX = 6, - PER_HS_UART_2_XMIT = 7, - PER_HS_UART_2_RX = 8, - PER_HS_UART_7_XMIT = 9, - PER_HS_UART_7_RX = 10, - PER_SPI1_REC_XMIT = 11, - PER_MLC_NDF_SREC = 12, - PER_CAM_DMA_2 = 13, - PER_PRNG_INFIFO = 14, - PER_PRNG_OUTFIFO = 15, -}; - -struct pnx4008_dma_ch_ctrl { - int tc_mask; - int cacheable; - int bufferable; - int priv_mode; - int di; - int si; - int dest_ahb1; - int src_ahb1; - int dwidth; - int swidth; - int dbsize; - int sbsize; - int tr_size; -}; - -struct pnx4008_dma_ch_config { - int halt; - int active; - int lock; - int itc; - int ie; - int flow_cntrl; - int dest_per; - int src_per; -}; - -struct pnx4008_dma_ll { - unsigned long src_addr; - unsigned long dest_addr; - u32 next_dma; - unsigned long ch_ctrl; - struct pnx4008_dma_ll *next; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -struct pnx4008_dma_config { - int is_ll; - unsigned long src_addr; - unsigned long dest_addr; - unsigned long ch_ctrl; - unsigned long ch_cfg; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *); -extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t); -extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *); - -extern int pnx4008_request_channel(char *, int, - void (*)(int, int, void *), - void *); -extern void pnx4008_free_channel(int); -extern int pnx4008_config_dma(int, int, int); -extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *, - unsigned long *); -extern int pnx4008_dma_parse_control(unsigned long, - struct pnx4008_dma_ch_ctrl *); -extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *, - unsigned long *); -extern int pnx4008_dma_parse_config(unsigned long, - struct pnx4008_dma_ch_config *); -extern int pnx4008_config_channel(int, struct pnx4008_dma_config *); -extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *); -extern int pnx4008_dma_ch_enable(int); -extern int pnx4008_dma_ch_disable(int); -extern int pnx4008_dma_ch_enabled(int); -extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *, - struct pnx4008_dma_ch_ctrl *); -extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *, - struct pnx4008_dma_ch_ctrl *); - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/include/asm-arm/arch-pnx4008/entry-macro.S deleted file mode 100644 index f11731974e5..00000000000 --- a/include/asm-arm/arch-pnx4008/entry-macro.S +++ /dev/null @@ -1,127 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/entry-macro.S - * - * Low-level IRQ helper macros for PNX4008-based platforms - * - * 2005-2006 (c) MontaVista Software, Inc. - * Author: Vitaly Wool - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include "platform.h" - -#define IO_BASE 0xF0000000 -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#define INTRC_MASK 0x00 -#define INTRC_RAW_STAT 0x04 -#define INTRC_STAT 0x08 -#define INTRC_POLAR 0x0C -#define INTRC_ACT_TYPE 0x10 -#define INTRC_TYPE 0x14 - -#define SIC1_BASE_INT 32 -#define SIC2_BASE_INT 64 - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -/* decode the MIC interrupt numbers */ - ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) - ldr \irqstat, [\base, #INTRC_STAT] - - cmp \irqstat,#1<<16 - movhs \irqnr,#16 - movlo \irqnr,#0 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - -/* was there an interrupt ? if not then drop out with EQ status */ - teq \irqstat,#0 - beq 1003f - -/* and now check for extended IRQ reasons */ - cmp \irqnr,#1 - bls 1003f - cmp \irqnr,#30 - blo 1002f - -/* IRQ 31,30 : High priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */ -/* set the base IRQ number */ - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - moveq \irqnr,#SIC1_BASE_INT - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - movne \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - and \irqstat,\irqstat,\tmp - b 1004f - -1003: -/* IRQ 1,0 : Low priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/ -/* read the correct SIC */ -/* set the base IRQ number */ - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - movne \irqnr,#SIC1_BASE_INT - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - moveq \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - bic \irqstat,\irqstat,\tmp - -1004: - - cmp \irqstat,#1<<16 - addhs \irqnr,\irqnr,#16 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - - -/* is irqstat not zero */ - -1002: -/* we assert that irqstat is not equal to zero and return ne status if true*/ - teq \irqstat,#0 -1003: - .endm - - - .macro irq_prio_table - .endm - - diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h deleted file mode 100644 index d01bf83d55c..00000000000 --- a/include/asm-arm/arch-pnx4008/gpio.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/gpio.h - * - * PNX4008 GPIO driver - header file - * - * Author: Dmitry Chigirev - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef _PNX4008_GPIO_H_ -#define _PNX4008_GPIO_H_ - - -/* Block numbers */ -#define GPIO_IN (0) -#define GPIO_OUT (0x100) -#define GPIO_BID (0x200) -#define GPIO_RAM (0x300) -#define GPIO_MUX (0x400) - -#define GPIO_TYPE_MASK(K) ((K) & 0x700) - -/* INPUT GPIOs */ -/* GPI */ -#define GPI_00 (GPIO_IN | 0) -#define GPI_01 (GPIO_IN | 1) -#define GPI_02 (GPIO_IN | 2) -#define GPI_03 (GPIO_IN | 3) -#define GPI_04 (GPIO_IN | 4) -#define GPI_05 (GPIO_IN | 5) -#define GPI_06 (GPIO_IN | 6) -#define GPI_07 (GPIO_IN | 7) -#define GPI_08 (GPIO_IN | 8) -#define GPI_09 (GPIO_IN | 9) -#define U1_RX (GPIO_IN | 15) -#define U2_HTCS (GPIO_IN | 16) -#define U2_RX (GPIO_IN | 17) -#define U3_RX (GPIO_IN | 18) -#define U4_RX (GPIO_IN | 19) -#define U5_RX (GPIO_IN | 20) -#define U6_IRRX (GPIO_IN | 21) -#define U7_HCTS (GPIO_IN | 22) -#define U7_RX (GPIO_IN | 23) -/* MISC IN */ -#define SPI1_DATIN (GPIO_IN | 25) -#define DISP_SYNC (GPIO_IN | 26) -#define SPI2_DATIN (GPIO_IN | 27) -#define GPI_11 (GPIO_IN | 28) - -#define GPIO_IN_MASK 0x1eff83ff - -/* OUTPUT GPIOs */ -/* GPO */ -#define GPO_00 (GPIO_OUT | 0) -#define GPO_01 (GPIO_OUT | 1) -#define GPO_02 (GPIO_OUT | 2) -#define GPO_03 (GPIO_OUT | 3) -#define GPO_04 (GPIO_OUT | 4) -#define GPO_05 (GPIO_OUT | 5) -#define GPO_06 (GPIO_OUT | 6) -#define GPO_07 (GPIO_OUT | 7) -#define GPO_08 (GPIO_OUT | 8) -#define GPO_09 (GPIO_OUT | 9) -#define GPO_10 (GPIO_OUT | 10) -#define GPO_11 (GPIO_OUT | 11) -#define GPO_12 (GPIO_OUT | 12) -#define GPO_13 (GPIO_OUT | 13) -#define GPO_14 (GPIO_OUT | 14) -#define GPO_15 (GPIO_OUT | 15) -#define GPO_16 (GPIO_OUT | 16) -#define GPO_17 (GPIO_OUT | 17) -#define GPO_18 (GPIO_OUT | 18) -#define GPO_19 (GPIO_OUT | 19) -#define GPO_20 (GPIO_OUT | 20) -#define GPO_21 (GPIO_OUT | 21) -#define GPO_22 (GPIO_OUT | 22) -#define GPO_23 (GPIO_OUT | 23) - -#define GPIO_OUT_MASK 0xffffff - -/* BIDIRECTIONAL GPIOs */ -/* RAM pins */ -#define RAM_D19 (GPIO_RAM | 0) -#define RAM_D20 (GPIO_RAM | 1) -#define RAM_D21 (GPIO_RAM | 2) -#define RAM_D22 (GPIO_RAM | 3) -#define RAM_D23 (GPIO_RAM | 4) -#define RAM_D24 (GPIO_RAM | 5) -#define RAM_D25 (GPIO_RAM | 6) -#define RAM_D26 (GPIO_RAM | 7) -#define RAM_D27 (GPIO_RAM | 8) -#define RAM_D28 (GPIO_RAM | 9) -#define RAM_D29 (GPIO_RAM | 10) -#define RAM_D30 (GPIO_RAM | 11) -#define RAM_D31 (GPIO_RAM | 12) - -#define GPIO_RAM_MASK 0x1fff - -/* I/O pins */ -#define GPIO_00 (GPIO_BID | 25) -#define GPIO_01 (GPIO_BID | 26) -#define GPIO_02 (GPIO_BID | 27) -#define GPIO_03 (GPIO_BID | 28) -#define GPIO_04 (GPIO_BID | 29) -#define GPIO_05 (GPIO_BID | 30) - -#define GPIO_BID_MASK 0x7e000000 - -/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */ -#define GPIO_SDRAM_SEL (GPIO_MUX | 3) - -#define GPIO_MUX_MASK 0x8 - -/* Extraction/assembly macros */ -#define GPIO_BIT_MASK(K) ((K) & 0x1F) -#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K)) -#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK)) -#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK)) -#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK)) -#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) -#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 -#define SE_USB_OTG_ATX_INT_N 19 -/*18 unused*/ -#define SE_DSP_GPIO4_INT 17 -#define SE_KEY_IRQ 16 -#define SE_DSP_SLAVEPORT_INT 15 -#define SE_DSP_GPIO1_INT 14 -#define SE_DSP_GPIO0_INT 13 -#define SE_DSP_AHB_INT 12 -/*11-6 unused*/ -#define SE_GPIO_05_INT 5 -#define SE_GPIO_04_INT 4 -#define SE_GPIO_03_INT 3 -#define SE_GPIO_02_INT 2 -#define SE_GPIO_01_INT 1 -#define SE_GPIO_00_INT 0 - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern int pnx4008_gpio_register_pin(unsigned short pin); -extern int pnx4008_gpio_unregister_pin(unsigned short pin); -extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); -extern int pnx4008_gpio_write_pin(unsigned short pin, int output); -extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_direction(unsigned short pin); -extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_mux(unsigned short pin); - -static inline void start_int_umask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_mask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_ack(u8 irq) -{ - __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); -} - -static inline void start_int_set_falling_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -static inline void start_int_set_rising_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -#endif /* _PNX4008_GPIO_H_ */ diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/include/asm-arm/arch-pnx4008/hardware.h deleted file mode 100644 index a4410397a92..00000000000 --- a/include/asm-arm/arch-pnx4008/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/hardware.h - * - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* Start of virtual addresses for IO devices */ -#define IO_BASE 0xF0000000 - -/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */ -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#endif diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h deleted file mode 100644 index 92e8d65006f..00000000000 --- a/include/asm-arm/arch-pnx4008/i2c.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * PNX4008-specific tweaks for I2C IP3204 block - * - * Author: Vitaly Wool - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_I2C_H__ -#define __ASM_ARCH_I2C_H__ - -#include -#include - -enum { - mstatus_tdi = 0x00000001, - mstatus_afi = 0x00000002, - mstatus_nai = 0x00000004, - mstatus_drmi = 0x00000008, - mstatus_active = 0x00000020, - mstatus_scl = 0x00000040, - mstatus_sda = 0x00000080, - mstatus_rff = 0x00000100, - mstatus_rfe = 0x00000200, - mstatus_tff = 0x00000400, - mstatus_tfe = 0x00000800, -}; - -enum { - mcntrl_tdie = 0x00000001, - mcntrl_afie = 0x00000002, - mcntrl_naie = 0x00000004, - mcntrl_drmie = 0x00000008, - mcntrl_daie = 0x00000020, - mcntrl_rffie = 0x00000040, - mcntrl_tffie = 0x00000080, - mcntrl_reset = 0x00000100, - mcntrl_cdbmode = 0x00000400, -}; - -enum { - rw_bit = 1 << 0, - start_bit = 1 << 8, - stop_bit = 1 << 9, -}; - -#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ -#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ -#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ -#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ -#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ -#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ -#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ -#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ -#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ -#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ -#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ -#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ -#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ - -#define HCLK_MHZ 13 -#define I2C_CHIP_NAME "PNX4008-I2C" - -#endif /* __ASM_ARCH_I2C_H___ */ diff --git a/include/asm-arm/arch-pnx4008/io.h b/include/asm-arm/arch-pnx4008/io.h deleted file mode 100644 index 29ee43955c5..00000000000 --- a/include/asm-arm/arch-pnx4008/io.h +++ /dev/null @@ -1,21 +0,0 @@ - -/* - * include/asm-arm/arch-pnx4008/io.h - * - * Author: Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-pnx4008/irq.h b/include/asm-arm/arch-pnx4008/irq.h deleted file mode 100644 index fabff5dc337..00000000000 --- a/include/asm-arm/arch-pnx4008/irq.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/irq.h - * - * PNX4008 IRQ controller driver - header file - * this one is used in entry-arnv.S as well so it cannot contain C code - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __PNX4008_IRQ_H__ -#define __PNX4008_IRQ_H__ - -#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) -#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) -#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - -/* Manual: Chapter 20, page 195 */ - -#define INTC_BIT(irq) (1<< ((irq) & 0x1F)) - -#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9))) -#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9))) -#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9))) -#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9))) -#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9))) -#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9))) - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern void __init pnx4008_init_irq(void); - -#endif /* __PNX4008_IRQ_H__ */ diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h deleted file mode 100644 index a25d18f2d87..00000000000 --- a/include/asm-arm/arch-pnx4008/irqs.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/irqs.h - * - * PNX4008 IRQ controller driver - header file - * - * Author: Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_IRQS_h__ -#define __PNX4008_IRQS_h__ - -#define NR_IRQS 96 - -/*Manual: table 259, page 199*/ - -/*SUB2 Interrupt Routing (SIC2)*/ - -#define SIC2_BASE_INT 64 - -#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */ -#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */ -#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */ -#define GPI_06_INT 92 -#define GPI_05_INT 91 -#define GPI_04_INT 90 -#define GPI_03_INT 89 -#define GPI_02_INT 88 -#define GPI_01_INT 87 -#define GPI_00_INT 86 -#define BT_CLKREQ_INT 85 -#define SPI1_DATIN_INT 84 -#define U5_RX_INT 83 -#define SDIO_INT_N 82 -#define CAM_HS_INT 81 -#define CAM_VS_INT 80 -#define GPI_07_INT 79 -#define DISP_SYNC_INT 78 -#define DSP_INT8 77 -#define U7_HCTS_INT 76 -#define GPI_10_INT 75 -#define GPI_09_INT 74 -#define GPI_08_INT 73 -#define DSP_INT7 72 -#define U2_HCTS_INT 71 -#define SPI2_DATIN_INT 70 -#define GPIO_05_INT 69 -#define GPIO_04_INT 68 -#define GPIO_03_INT 67 -#define GPIO_02_INT 66 -#define GPIO_01_INT 65 -#define GPIO_00_INT 64 - -/*Manual: table 258, page 198*/ - -/*SUB1 Interrupt Routing (SIC1)*/ - -#define SIC1_BASE_INT 32 - -#define USB_I2C_INT 63 -#define USB_DEV_HP_INT 62 -#define USB_DEV_LP_INT 61 -#define USB_DEV_DMA_INT 60 -#define USB_HOST_INT 59 -#define USB_OTG_ATX_INT_N 58 -#define USB_OTG_TIMER_INT 57 -#define SW_INT 56 -#define SPI1_INT 55 -#define KEY_IRQ 54 -#define DSP_M_INT 53 -#define RTC_INT 52 -#define I2C_1_INT 51 -#define I2C_2_INT 50 -#define PLL1_LOCK_INT 49 -#define PLL2_LOCK_INT 48 -#define PLL3_LOCK_INT 47 -#define PLL4_LOCK_INT 46 -#define PLL5_LOCK_INT 45 -#define SPI2_INT 44 -#define DSP_INT1 43 -#define DSP_INT2 42 -#define DSP_TDM_INT2 41 -#define TS_AUX_INT 40 -#define TS_IRQ 39 -#define TS_P_INT 38 -#define UOUT1_TO_PAD_INT 37 -#define GPI_11_INT 36 -#define DSP_INT4 35 -#define JTAG_COMM_RX_INT 34 -#define JTAG_COMM_TX_INT 33 -#define DSP_INT3 32 - -/*Manual: table 257, page 197*/ - -/*MAIN Interrupt Routing*/ - -#define MAIN_BASE_INT 0 - -#define SUB2_FIQ_N 31 /*active low */ -#define SUB1_FIQ_N 30 /*active low */ -#define JPEG_INT 29 -#define DMA_INT 28 -#define MSTIMER_INT 27 -#define IIR1_INT 26 -#define IIR2_INT 25 -#define IIR7_INT 24 -#define DSP_TDM_INT0 23 -#define DSP_TDM_INT1 22 -#define DSP_P_INT 21 -#define DSP_INT0 20 -#define DUM_INT 19 -#define UOUT0_TO_PAD_INT 18 -#define MP4_ENC_INT 17 -#define MP4_DEC_INT 16 -#define SD0_INT 15 -#define MBX_INT 14 -#define SD1_INT 13 -#define MS_INT_N 12 -#define FLASH_INT 11 /*NAND*/ -#define IIR6_INT 10 -#define IIR5_INT 9 -#define IIR4_INT 8 -#define IIR3_INT 7 -#define WATCH_INT 6 -#define HSTIMER_INT 5 -#define ARCH_TIMER_IRQ HSTIMER_INT -#define CAM_INT 4 -#define PRNG_INT 3 -#define CRYPTO_INT 2 -#define SUB2_IRQ_N 1 /*active low */ -#define SUB1_IRQ_N 0 /*active low */ - -#define PNX4008_IRQ_TYPES \ -{ /*IRQ #'s: */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \ -} - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 - -#endif /* __PNX4008_IRQS_h__ */ diff --git a/include/asm-arm/arch-pnx4008/memory.h b/include/asm-arm/arch-pnx4008/memory.h deleted file mode 100644 index 0d8268a9526..00000000000 --- a/include/asm-arm/arch-pnx4008/memory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/memory.h - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET (0x80000000) - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET) - -#endif diff --git a/include/asm-arm/arch-pnx4008/param.h b/include/asm-arm/arch-pnx4008/param.h deleted file mode 100644 index 95d5f547b41..00000000000 --- a/include/asm-arm/arch-pnx4008/param.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/param.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define HZ 100 diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h deleted file mode 100644 index 2613c7c669b..00000000000 --- a/include/asm-arm/arch-pnx4008/platform.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/platform.h - * - * PNX4008 Base addresses - header file - * - * Author: Dmitry Chigirev - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ - -#define PNX4008_IRAM_BASE 0x08000000 -#define PNX4008_IRAM_SIZE 0x00010000 -#define PNX4008_YUV_SLAVE_BASE 0x10000000 -#define PNX4008_DUM_SLAVE_BASE 0x18000000 -#define PNX4008_NDF_FLASH_BASE 0x20020000 -#define PNX4008_SPI1_BASE 0x20088000 -#define PNX4008_SPI2_BASE 0x20090000 -#define PNX4008_SD_CONFIG_BASE 0x20098000 -#define PNX4008_FLASH_DATA 0x200B0000 -#define PNX4008_MLC_FLASH_BASE 0x200B8000 -#define PNX4008_JPEG_CONFIG_BASE 0x300A0000 -#define PNX4008_DMA_CONFIG_BASE 0x31000000 -#define PNX4008_USB_CONFIG_BASE 0x31020000 -#define PNX4008_SDRAM_CFG_BASE 0x31080000 -#define PNX4008_AHB2FAB_BASE 0x40000000 -#define PNX4008_PWRMAN_BASE 0x40004000 -#define PNX4008_INTCTRLMIC_BASE 0x40008000 -#define PNX4008_INTCTRLSIC1_BASE 0x4000C000 -#define PNX4008_INTCTRLSIC2_BASE 0x40010000 -#define PNX4008_HSUART1_BASE 0x40014000 -#define PNX4008_HSUART2_BASE 0x40018000 -#define PNX4008_HSUART7_BASE 0x4001C000 -#define PNX4008_RTC_BASE 0x40024000 -#define PNX4008_PIO_BASE 0x40028000 -#define PNX4008_MSTIMER_BASE 0x40034000 -#define PNX4008_HSTIMER_BASE 0x40038000 -#define PNX4008_WDOG_BASE 0x4003C000 -#define PNX4008_DEBUG_BASE 0x40040000 -#define PNX4008_TOUCH1_BASE 0x40048000 -#define PNX4008_KEYSCAN_BASE 0x40050000 -#define PNX4008_UARTCTRL_BASE 0x40054000 -#define PNX4008_PWM_BASE 0x4005C000 -#define PNX4008_UART3_BASE 0x40080000 -#define PNX4008_UART4_BASE 0x40088000 -#define PNX4008_UART5_BASE 0x40090000 -#define PNX4008_UART6_BASE 0x40098000 -#define PNX4008_I2C1_BASE 0x400A0000 -#define PNX4008_I2C2_BASE 0x400A8000 -#define PNX4008_MAGICGATE_BASE 0x400B0000 -#define PNX4008_DUMCONF_BASE 0x400B8000 -#define PNX4008_DUM_MAINCFG_BASE 0x400BC000 -#define PNX4008_DSP_BASE 0x400C0000 -#define PNX4008_PROFCOUNTER_BASE 0x400C8000 -#define PNX4008_CRYPTO_BASE 0x400D0000 -#define PNX4008_CAMIFCONF_BASE 0x400D8000 -#define PNX4008_YUV2RGB_BASE 0x400E0000 -#define PNX4008_AUDIOCONFIG_BASE 0x400E8000 - -#endif diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h deleted file mode 100644 index bac1634cb3e..00000000000 --- a/include/asm-arm/arch-pnx4008/pm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/pm.h - * - * PNX4008 Power Management Routiness - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_PNX4008_PM_H -#define __ASM_ARCH_PNX4008_PM_H - -#ifndef __ASSEMBLER__ -#include "irq.h" -#include "irqs.h" -#include "clock.h" - -extern void pnx4008_pm_idle(void); -extern void pnx4008_pm_suspend(void); -extern unsigned int pnx4008_cpu_suspend_sz; -extern void pnx4008_cpu_suspend(void); -extern unsigned int pnx4008_cpu_standby_sz; -extern void pnx4008_cpu_standby(void); - -extern int pnx4008_startup_pll(struct clk *); -extern int pnx4008_shutdown_pll(struct clk *); - -#endif /* ASSEMBLER */ -#endif /* __ASM_ARCH_PNX4008_PM_H */ diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h deleted file mode 100644 index 17f9d7f9e5a..00000000000 --- a/include/asm-arm/arch-pnx4008/system.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/system.h - * - * Copyright (C) 2003 Philips Semiconductors - * Copyright (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h deleted file mode 100644 index f22ee24a021..00000000000 --- a/include/asm-arm/arch-pnx4008/timex.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PNX4008_TIMEX_H -#define __PNX4008_TIMEX_H - -#include -#include - -#define CLOCK_TICK_RATE 1000000 - -#define TICKS2USECS(x) (x) - -/* MilliSecond Timer - Chapter 21 Page 202 */ - -#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) -#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) -#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) -#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) -#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) -#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) - -/* High Speed Timer - Chpater 22, Page 205 */ - -#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) -#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) -#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) -#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) -#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) -#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) -#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) -#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) -#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) -#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) -#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) -#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) - -/* IMPORTANT: both timers are UPCOUNTING */ - -/* xSTIM_MCTRL bit definitions */ -#define MR0_INT 1 -#define RESET_COUNT0 (1<<1) -#define STOP_COUNT0 (1<<2) -#define MR1_INT (1<<3) -#define RESET_COUNT1 (1<<4) -#define STOP_COUNT1 (1<<5) -#define MR2_INT (1<<6) -#define RESET_COUNT2 (1<<7) -#define STOP_COUNT2 (1<<8) - -/* xSTIM_CTRL bit definitions */ -#define COUNT_ENAB 1 -#define RESET_COUNT (1<<1) -#define DEBUG_EN (1<<2) - -/* xSTIM_INT bit definitions */ -#define MATCH0_INT 1 -#define MATCH1_INT (1<<1) -#define MATCH2_INT (1<<2) -#define RTC_TICK0 (1<<4) -#define RTC_TICK1 (1<<5) - -#endif diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/include/asm-arm/arch-pnx4008/uncompress.h deleted file mode 100644 index 8fa4d24b72b..00000000000 --- a/include/asm-arm/arch-pnx4008/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2006 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART5_BASE 0x40090000 - -#define UART5_DR (*(volatile unsigned char *) (UART5_BASE)) -#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18)) - -static __inline__ void putc(char c) -{ - while (UART5_FR & (1 << 5)) - barrier(); - - UART5_DR = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/include/asm-arm/arch-pnx4008/vmalloc.h deleted file mode 100644 index 140d925f6f3..00000000000 --- a/include/asm-arm/arch-pnx4008/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/vmalloc.h - * - * Author: Vitaly Wool - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-pxa/akita.h b/include/asm-arm/arch-pxa/akita.h deleted file mode 100644 index 5d8cc1d9cb1..00000000000 --- a/include/asm-arm/arch-pxa/akita.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Hardware specific definitions for SL-C1000 (Akita) - * - * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* Akita IO Expander GPIOs */ - -#define AKITA_IOEXP_RESERVED_7 (1 << 7) -#define AKITA_IOEXP_IR_ON (1 << 6) -#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) -#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) -#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) -#define AKITA_IOEXP_MIC_BIAS (1 << 2) -#define AKITA_IOEXP_RESERVED_1 (1 << 1) -#define AKITA_IOEXP_RESERVED_0 (1 << 0) - -/* Direction Bitfield 0=output 1=input */ -#define AKITA_IOEXP_IO_DIR 0 -/* Default Values */ -#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP) - -extern struct platform_device akitaioexp_device; - -void akita_set_ioexp(struct device *dev, unsigned char bitmask); -void akita_reset_ioexp(struct device *dev, unsigned char bitmask); - diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h deleted file mode 100644 index f82f96dd105..00000000000 --- a/include/asm-arm/arch-pxa/audio.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_ARCH_AUDIO_H__ -#define __ASM_ARCH_AUDIO_H__ - -#include -#include - -typedef struct { - int (*startup)(struct snd_pcm_substream *, void *); - void (*shutdown)(struct snd_pcm_substream *, void *); - void (*suspend)(void *); - void (*resume)(void *); - void *priv; -} pxa2xx_audio_ops_t; - -extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); - -#endif diff --git a/include/asm-arm/arch-pxa/bitfield.h b/include/asm-arm/arch-pxa/bitfield.h deleted file mode 100644 index f1f0e3387d9..00000000000 --- a/include/asm-arm/arch-pxa/bitfield.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * FILE bitfield.h - * - * Version 1.1 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date April 1998 (April 1997) - * System Advanced RISC Machine (ARM) - * Language C or ARM Assembly - * Purpose Definition of macros to operate on bit fields. - */ - - - -#ifndef __BITFIELD_H -#define __BITFIELD_H - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - - -/* - * MACRO: Fld - * - * Purpose - * The macro "Fld" encodes a bit field, given its size and its shift value - * with respect to bit 0. - * - * Note - * A more intuitive way to encode bit fields would have been to use their - * mask. However, extracting size and shift value information from a bit - * field's mask is cumbersome and might break the assembler (255-character - * line-size limit). - * - * Input - * Size Size of the bit field, in number of bits. - * Shft Shift value of the bit field with respect to bit 0. - * - * Output - * Fld Encoded bit field. - */ - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - - -/* - * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit - * - * Purpose - * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return - * the size, shift value, mask, aligned mask, and first bit of a - * bit field. - * - * Input - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FSize Size of the bit field, in number of bits. - * FShft Shift value of the bit field with respect to bit 0. - * FMsk Mask for the bit field. - * FAlnMsk Mask for the bit field, aligned on bit 0. - * F1stBit First bit of the bit field. - */ - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - - -/* - * MACRO: FInsrt - * - * Purpose - * The macro "FInsrt" inserts a value into a bit field by shifting the - * former appropriately. - * - * Input - * Value Bit-field value. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FInsrt Bit-field value positioned appropriately. - */ - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - - -/* - * MACRO: FExtr - * - * Purpose - * The macro "FExtr" extracts the value of a bit field by masking and - * shifting it appropriately. - * - * Input - * Data Data containing the bit-field to be extracted. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FExtr Bit-field value. - */ - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - - -#endif /* __BITFIELD_H */ diff --git a/include/asm-arm/arch-pxa/camera.h b/include/asm-arm/arch-pxa/camera.h deleted file mode 100644 index 39516ced8b1..00000000000 --- a/include/asm-arm/arch-pxa/camera.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - camera.h - PXA camera driver header file - - Copyright (C) 2003, Intel Corporation - Copyright (C) 2008, Guennadi Liakhovetski - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef __ASM_ARCH_CAMERA_H_ -#define __ASM_ARCH_CAMERA_H_ - -#define PXA_CAMERA_MASTER 1 -#define PXA_CAMERA_DATAWIDTH_4 2 -#define PXA_CAMERA_DATAWIDTH_5 4 -#define PXA_CAMERA_DATAWIDTH_8 8 -#define PXA_CAMERA_DATAWIDTH_9 0x10 -#define PXA_CAMERA_DATAWIDTH_10 0x20 -#define PXA_CAMERA_PCLK_EN 0x40 -#define PXA_CAMERA_MCLK_EN 0x80 -#define PXA_CAMERA_PCP 0x100 -#define PXA_CAMERA_HSP 0x200 -#define PXA_CAMERA_VSP 0x400 - -struct pxacamera_platform_data { - int (*init)(struct device *); - int (*power)(struct device *, int); - int (*reset)(struct device *, int); - - unsigned long flags; - unsigned long mclk_10khz; -}; - -extern void pxa_set_camera_info(struct pxacamera_platform_data *); - -#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/asm-arm/arch-pxa/colibri.h b/include/asm-arm/arch-pxa/colibri.h deleted file mode 100644 index 2ae373fb567..00000000000 --- a/include/asm-arm/arch-pxa/colibri.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _COLIBRI_H_ -#define _COLIBRI_H_ - -/* physical memory regions */ -#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ -#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ - -/* virtual memory regions */ -#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ - -/* size of flash */ -#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ - -/* Ethernet Controller Davicom DM9000 */ -#define GPIO_DM9000 114 -#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) - -#endif /* _COLIBRI_H_ */ diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h deleted file mode 100644 index bf856503baf..00000000000 --- a/include/asm-arm/arch-pxa/corgi.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Hardware specific definitions for SL-C7xx series of PDAs - * - * Copyright (c) 2004-2005 Richard Purdie - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef __ASM_ARCH_CORGI_H -#define __ASM_ARCH_CORGI_H 1 - - -/* - * Corgi (Non Standard) GPIO Definitions - */ -#define CORGI_GPIO_KEY_INT (0) /* Keyboard Interrupt */ -#define CORGI_GPIO_AC_IN (1) /* Charger Detection */ -#define CORGI_GPIO_WAKEUP (3) /* System wakeup notification? */ -#define CORGI_GPIO_AK_INT (4) /* Headphone Jack Control Interrupt */ -#define CORGI_GPIO_TP_INT (5) /* Touch Panel Interrupt */ -#define CORGI_GPIO_nSD_WP (7) /* SD Write Protect? */ -#define CORGI_GPIO_nSD_DETECT (9) /* MMC/SD Card Detect */ -#define CORGI_GPIO_nSD_INT (10) /* SD Interrupt for SDIO? */ -#define CORGI_GPIO_MAIN_BAT_LOW (11) /* Main Battery Low Notification */ -#define CORGI_GPIO_BAT_COVER (11) /* Battery Cover Detect */ -#define CORGI_GPIO_LED_ORANGE (13) /* Orange LED Control */ -#define CORGI_GPIO_CF_CD (14) /* Compact Flash Card Detect */ -#define CORGI_GPIO_CHRG_FULL (16) /* Charging Complete Notification */ -#define CORGI_GPIO_CF_IRQ (17) /* Compact Flash Interrupt */ -#define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */ -#define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */ -#define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */ -#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */ -#define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */ -#define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */ -#define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */ -#define CORGI_GPIO_DISCHARGE_ON (42) /* Enable battery Discharge */ -#define CORGI_GPIO_CHRG_UKN (43) /* Unknown Charging (Bypass Control?) */ -#define CORGI_GPIO_HSYNC (44) /* LCD HSync Pulse */ -#define CORGI_GPIO_USB_PULLUP (45) /* USB show presence to host */ - - -/* - * Corgi Keyboard Definitions - */ -#define CORGI_KEY_STROBE_NUM (12) -#define CORGI_KEY_SENSE_NUM (8) -#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc) -#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000) -#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26) -#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003) -#define CORGI_GPIO_LOW_SENSE_LSHIFT (6) -#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a)) -#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a)) -#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0) -#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000) -#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f) -#define CORGI_GPIO_KEY_SENSE(a) (58+(a)) -#define CORGI_GPIO_KEY_STROBE(a) (66+(a)) - - -/* - * Corgi Interrupts - */ -#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0) -#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3) -#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4) -#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10) -#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11) -#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */ -#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */ - - -/* - * Corgi SCOOP GPIOs and Config - */ -#define CORGI_SCP_LED_GREEN SCOOP_GPCR_PA11 -#define CORGI_SCP_SWA SCOOP_GPCR_PA12 /* Hinge Switch A */ -#define CORGI_SCP_SWB SCOOP_GPCR_PA13 /* Hinge Switch B */ -#define CORGI_SCP_MUTE_L SCOOP_GPCR_PA14 -#define CORGI_SCP_MUTE_R SCOOP_GPCR_PA15 -#define CORGI_SCP_AKIN_PULLUP SCOOP_GPCR_PA16 -#define CORGI_SCP_APM_ON SCOOP_GPCR_PA17 -#define CORGI_SCP_BACKLIGHT_CONT SCOOP_GPCR_PA18 -#define CORGI_SCP_MIC_BIAS SCOOP_GPCR_PA19 - -#define CORGI_SCOOP_IO_DIR ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \ - CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \ - CORGI_SCP_MIC_BIAS ) -#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) - - -/* - * Shared data structures - */ -extern struct platform_device corgiscoop_device; -extern struct platform_device corgissp_device; - -#endif /* __ASM_ARCH_CORGI_H */ - diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S deleted file mode 100644 index 9012cbc0ad8..00000000000 --- a/include/asm-arm/arch-pxa/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-pxa/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include "hardware.h" - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x40000000 @ physical - movne \rx, #io_p2v(0x40000000) @ virtual - orr \rx, \rx, #0x00100000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h deleted file mode 100644 index dbe110ee266..00000000000 --- a/include/asm-arm/arch-pxa/dma.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/dma.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * Descriptor structure for PXA's DMA engine - * Note: this structure must always be aligned to a 16-byte boundary. - */ - -typedef struct pxa_dma_desc { - volatile u32 ddadr; /* Points to the next descriptor + flags */ - volatile u32 dsadr; /* DSADR value for the current transfer */ - volatile u32 dtadr; /* DTADR value for the current transfer */ - volatile u32 dcmd; /* DCMD value for the current transfer */ -} pxa_dma_desc; - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} pxa_dma_prio; - -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define HAVE_ARCH_PCI_SET_DMA_MASK 1 -#endif - -/* - * DMA registration - */ - -int __init pxa_init_dma(int num_ch); - -int pxa_request_dma (char *name, - pxa_dma_prio prio, - void (*irq_handler)(int, void *), - void *data); - -void pxa_free_dma (int dma_ch); - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S deleted file mode 100644 index 897d164da22..00000000000 --- a/include/asm-arm/arch-pxa/entry-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-pxa/entry-macro.S - * - * Low-level IRQ helper macros for PXA-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p15, 0, \tmp, c0, c0, 0 @ CPUID - mov \tmp, \tmp, lsr #13 - and \tmp, \tmp, #0x7 @ Core G - cmp \tmp, #1 - bhi 1004f - - mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 - add \base, \base, #0x00d00000 - ldr \irqstat, [\base, #0] @ ICIP - ldr \irqnr, [\base, #4] @ ICMR - b 1002f - -1004: - mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2 - mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2 - ands \irqnr, \irqstat, \irqnr - beq 1003f - rsb \irqstat, \irqnr, #0 - and \irqstat, \irqstat, \irqnr - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 - add \irqnr, \irqnr, #32 - b 1001f -1003: - mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP - mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR -1002: - ands \irqnr, \irqstat, \irqnr - beq 1001f - rsb \irqstat, \irqnr, #0 - and \irqstat, \irqstat, \irqnr - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 -1001: - .endm diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/include/asm-arm/arch-pxa/eseries-gpio.h deleted file mode 100644 index 4c90b131027..00000000000 --- a/include/asm-arm/arch-pxa/eseries-gpio.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * eseries-gpio.h - * - * Copyright (C) Ian Molton - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* e-series power button */ -#define GPIO_ESERIES_POWERBTN 0 - -/* UDC GPIO definitions */ -#define GPIO_E7XX_USB_DISC 13 -#define GPIO_E7XX_USB_PULLUP 3 - -#define GPIO_E800_USB_DISC 4 -#define GPIO_E800_USB_PULLUP 84 - -/* e740 PCMCIA GPIO definitions */ -/* Note: PWR1 seems to be inverted */ -#define GPIO_E740_PCMCIA_CD0 8 -#define GPIO_E740_PCMCIA_CD1 44 -#define GPIO_E740_PCMCIA_RDY0 11 -#define GPIO_E740_PCMCIA_RDY1 6 -#define GPIO_E740_PCMCIA_RST0 27 -#define GPIO_E740_PCMCIA_RST1 24 -#define GPIO_E740_PCMCIA_PWR0 20 -#define GPIO_E740_PCMCIA_PWR1 23 - -/* e750 PCMCIA GPIO definitions */ -#define GPIO_E750_PCMCIA_CD0 8 -#define GPIO_E750_PCMCIA_RDY0 12 -#define GPIO_E750_PCMCIA_RST0 27 -#define GPIO_E750_PCMCIA_PWR0 20 - -/* e800 PCMCIA GPIO definitions */ -#define GPIO_E800_PCMCIA_RST0 69 -#define GPIO_E800_PCMCIA_RST1 72 -#define GPIO_E800_PCMCIA_PWR0 20 -#define GPIO_E800_PCMCIA_PWR1 73 - -/* e7xx IrDA power control */ -#define GPIO_E7XX_IR_ON 38 - -/* ASIC related GPIOs */ -#define GPIO_ESERIES_TMIO_IRQ 5 -#define GPIO_E800_ANGELX_IRQ 8 diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/include/asm-arm/arch-pxa/eseries-irq.h deleted file mode 100644 index f2a93d5e31d..00000000000 --- a/include/asm-arm/arch-pxa/eseries-irq.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * eseries-irq.h - * - * Copyright (C) Ian Molton - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8) -#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n)) - -#define ANGELX_RDY0_IRQ IRQ_ANGELX(0) -#define ANGELX_ST0_IRQ IRQ_ANGELX(1) -#define ANGELX_CD0_IRQ IRQ_ANGELX(2) -#define ANGELX_RDY1_IRQ IRQ_ANGELX(3) -#define ANGELX_ST1_IRQ IRQ_ANGELX(4) -#define ANGELX_CD1_IRQ IRQ_ANGELX(5) - -#define TMIO_IRQ_BASE (IRQ_BOARD_START+0) -#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n)) - -#define TMIO_SD_IRQ IRQ_TMIO(1) -#define TMIO_USB_IRQ IRQ_TMIO(2) - diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h deleted file mode 100644 index 2c1e3d8ad7a..00000000000 --- a/include/asm-arm/arch-pxa/gpio.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/gpio.h - * - * PXA GPIO wrappers for arch-neutral GPIO calls - * - * Written by Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_PXA_GPIO_H -#define __ASM_ARCH_PXA_GPIO_H - -#include -#include -#include - -#include - - -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space. - */ -#define NR_BUILTIN_GPIO 128 - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); - else - GPCR(gpio) = GPIO_bit(gpio); - } else { - __gpio_set_value(gpio, value); - } -} - -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) - - -#endif diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h deleted file mode 100644 index 6fa85c4f94f..00000000000 --- a/include/asm-arm/arch-pxa/gumstix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/gumstix.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* BTRESET - Reset line to Bluetooth module, active low signal. */ -#define GPIO_GUMSTIX_BTRESET 7 -#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) - - -/* -GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean -interrupt signal for determining cable presence. On the original gumstix, -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, -this moves to GPIO17 and GPIO37. */ - -/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn -has detected a cable insertion; driven low otherwise. */ - -#ifdef CONFIG_ARCH_GUMSTIX_ORIG - -#define GPIO_GUMSTIX_USB_GPIOn 81 -#define GPIO_GUMSTIX_USB_GPIOx 83 - -#else - -#define GPIO_GUMSTIX_USB_GPIOn 35 -#define GPIO_GUMSTIX_USB_GPIOx 41 - -#endif - -/* usb state change */ -#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) - -#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) -#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) -#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) - -/* - * SD/MMC definitions - */ -#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ -#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ -#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) - -/* - * SMC Ethernet definitions - * ETH_RST provides a hardware reset line to the ethernet chip - * ETH is the IRQ line in from the ethernet chip to the PXA - */ -#define GPIO_GUMSTIX_ETH0_RST 80 -#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) -#define GPIO_GUMSTIX_ETH1_RST 52 -#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) - -#define GPIO_GUMSTIX_ETH0 36 -#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) -#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) -#define GPIO_GUMSTIX_ETH1 27 -#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) -#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) - - -/* CF reset line */ -#define GPIO8_RESET 8 - -/* CF slot 0 */ -#define GPIO4_nBVD1 4 -#define GPIO4_nSTSCHG GPIO4_nBVD1 -#define GPIO11_nCD 11 -#define GPIO26_PRDY_nBSY 26 -#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) -#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) -#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) - -/* CF slot 1 */ -#define GPIO18_nBVD1 18 -#define GPIO18_nSTSCHG GPIO18_nBVD1 -#define GPIO36_nCD 36 -#define GPIO27_PRDY_nBSY 27 -#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) -#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) -#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) - -/* CF GPIO line modes */ -#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) -#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) -#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) -#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) -#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) -#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) -#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h deleted file mode 100644 index 979a45695d7..00000000000 --- a/include/asm-arm/arch-pxa/hardware.h +++ /dev/null @@ -1,240 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/hardware.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * We requires absolute addresses. - */ -#define PCIO_BASE 0 - -/* - * Workarounds for at least 2 errata so far require this. - * The mapping is set in mach-pxa/generic.c. - */ -#define UNCACHED_PHYS_0 0xff000000 -#define UNCACHED_ADDR UNCACHED_PHYS_0 - -/* - * Intel PXA2xx internal register mapping: - * - * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff - * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff - * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff - * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff - * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff - * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff - * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff - * - * Note that not all PXA2xx chips implement all those addresses, and the - * kernel only maps the minimum needed range of this mapping. - */ -#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) -#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) - -#ifndef __ASSEMBLY__ - -# define __REG(x) (*((volatile u32 *)io_p2v(x))) - -/* With indexed regs we don't want to feed the index through io_p2v() - especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) \ - (*(volatile u32 *)((u32)&__REG(x) + (y))) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#else - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#endif - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_PXA25x -#define __cpu_is_pxa21x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xf3f; \ - _id == 0x212; \ - }) - -#define __cpu_is_pxa255(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x2d0; \ - }) - -#define __cpu_is_pxa25x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x2d0 || _id == 0x290; \ - }) -#else -#define __cpu_is_pxa21x(id) (0) -#define __cpu_is_pxa255(id) (0) -#define __cpu_is_pxa25x(id) (0) -#endif - -#ifdef CONFIG_PXA27x -#define __cpu_is_pxa27x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x411; \ - }) -#else -#define __cpu_is_pxa27x(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA300 -#define __cpu_is_pxa300(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x688; \ - }) -#else -#define __cpu_is_pxa300(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA310 -#define __cpu_is_pxa310(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x689; \ - }) -#else -#define __cpu_is_pxa310(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA320 -#define __cpu_is_pxa320(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x603 || _id == 0x682; \ - }) -#else -#define __cpu_is_pxa320(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA930 -#define __cpu_is_pxa930(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x683; \ - }) -#else -#define __cpu_is_pxa930(id) (0) -#endif - -#define cpu_is_pxa21x() \ - ({ \ - __cpu_is_pxa21x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa255() \ - ({ \ - __cpu_is_pxa255(read_cpuid_id()); \ - }) - -#define cpu_is_pxa25x() \ - ({ \ - __cpu_is_pxa25x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa27x() \ - ({ \ - __cpu_is_pxa27x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa300() \ - ({ \ - __cpu_is_pxa300(read_cpuid_id()); \ - }) - -#define cpu_is_pxa310() \ - ({ \ - __cpu_is_pxa310(read_cpuid_id()); \ - }) - -#define cpu_is_pxa320() \ - ({ \ - __cpu_is_pxa320(read_cpuid_id()); \ - }) - -#define cpu_is_pxa930() \ - ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa930(id); \ - }) - -/* - * CPUID Core Generation Bit - * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x - * == 0x3 for pxa300/pxa310/pxa320 - */ -#define __cpu_is_pxa2xx(id) \ - ({ \ - unsigned int _id = (id) >> 13 & 0x7; \ - _id <= 0x2; \ - }) - -#define __cpu_is_pxa3xx(id) \ - ({ \ - unsigned int _id = (id) >> 13 & 0x7; \ - _id == 0x3; \ - }) - -#define cpu_is_pxa2xx() \ - ({ \ - __cpu_is_pxa2xx(read_cpuid_id()); \ - }) - -#define cpu_is_pxa3xx() \ - ({ \ - __cpu_is_pxa3xx(read_cpuid_id()); \ - }) - -/* - * Handy routine to set GPIO alternate functions - */ -extern int pxa_gpio_mode( int gpio_mode ); - -/* - * Return GPIO level, nonzero means high, zero is low - */ -extern int pxa_gpio_get_value(unsigned gpio); - -/* - * Set output GPIO level - */ -extern void pxa_gpio_set_value(unsigned gpio, int value); - -/* - * return current memory and LCD clock frequency in units of 10kHz - */ -extern unsigned int get_memclk_frequency_10khz(void); - -/* - * register GPIO as reset generator - */ -extern int init_gpio_reset(int gpio); - -#endif - -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define PCIBIOS_MIN_IO 0 -#define PCIBIOS_MIN_MEM 0 -#define pcibios_assign_all_busses() 1 -#endif - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h deleted file mode 100644 index 80596b01344..00000000000 --- a/include/asm-arm/arch-pxa/i2c.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * i2c_pxa.h - * - * Copyright (C) 2002 Intrinsyc Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _I2C_PXA_H_ -#define _I2C_PXA_H_ - -#if 0 -#define DEF_TIMEOUT 3 -#else -/* need a longer timeout if we're dealing with the fact we may well be - * looking at a multi-master environment -*/ -#define DEF_TIMEOUT 32 -#endif - -#define BUS_ERROR (-EREMOTEIO) -#define XFER_NAKED (-ECONNREFUSED) -#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ - -/* ICR initialize bit values -* -* 15. FM 0 (100 Khz operation) -* 14. UR 0 (No unit reset) -* 13. SADIE 0 (Disables the unit from interrupting on slave addresses -* matching its slave address) -* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration -* in master mode) -* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) -* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) -* 9. IRFIE 1 (Enable interrupts from full buffer received) -* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) -* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) -* 6. IUE 0 (Disable unit until we change settings) -* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) -* 4. MA 0 (Only send stop with the ICR stop bit) -* 3. TB 0 (We are not transmitting a byte initially) -* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) -* 1. STOP 0 (Do not send a STOP) -* 0. START 0 (Do not send a START) -* -*/ -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) - -/* I2C status register init values - * - * 10. BED 1 (Clear bus error detected) - * 9. SAD 1 (Clear slave address detected) - * 7. IRF 1 (Clear IDBR Receive Full) - * 6. ITE 1 (Clear IDBR Transmit Empty) - * 5. ALD 1 (Clear Arbitration Loss Detected) - * 4. SSD 1 (Clear Slave Stop Detected) - */ -#define I2C_ISR_INIT 0x7FF /* status register init */ - -struct i2c_slave_client; - -struct i2c_pxa_platform_data { - unsigned int slave_addr; - struct i2c_slave_client *slave; - unsigned int class; - int use_pio; -}; - -extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); - -#ifdef CONFIG_PXA27x -extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info); -#endif - -#endif diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h deleted file mode 100644 index 21aa8ac35c1..00000000000 --- a/include/asm-arm/arch-pxa/idp.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/idp.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc. - * - * 2001-09-13: Cliff Brake - * Initial code - * - * 2005-02-15: Cliff Brake - * - * Changes for 2.6 kernel. - */ - - -/* - * Note: this file must be safe to include in assembly files - * - * Support for the Vibren PXA255 IDP requires rev04 or later - * IDP hardware. - */ - - -#define IDP_FLASH_PHYS (PXA_CS0_PHYS) -#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) -#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS) -#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000) -#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000) -#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000) -#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000) - - -/* - * virtual memory map - */ - -#define IDP_COREVOLT_VIRT (0xf0000000) -#define IDP_COREVOLT_SIZE (1*1024*1024) - -#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE) -#define IDP_CPLD_SIZE (1*1024*1024) - -#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000 -#error Your custom IO space is getting a bit large !! -#endif - -#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT) -#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS) - -#ifndef __ASSEMBLY__ -# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x))) -#else -# define __CPLD_REG(x) CPLD_P2V(x) -#endif - -/* board level registers in the CPLD: (offsets from CPLD_VIRT) */ - -#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00) -#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04) -#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08) -#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C) -#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10) -#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14) -#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18) -#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C) -#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20) -#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24) -#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28) -#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C) -#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30) -#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34) - -#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50) -#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54) -#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58) -#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C) - -/* FPGA register virtual addresses */ - -#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV) -#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR) -#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL) -#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH) -#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW) -#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN) -#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR) -#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE) -#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR) -#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE) -#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR) -#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL) -#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD) -#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE) - -#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW) -#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS) -#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS) -#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS) - - -/* - * Bit masks for various registers - */ - -// IDP_CPLD_PCCARD_PWR -#define PCC0_PWR0 (1 << 0) -#define PCC0_PWR1 (1 << 1) -#define PCC0_PWR2 (1 << 2) -#define PCC0_PWR3 (1 << 3) -#define PCC1_PWR0 (1 << 4) -#define PCC1_PWR1 (1 << 5) -#define PCC1_PWR2 (1 << 6) -#define PCC1_PWR3 (1 << 7) - -// IDP_CPLD_PCCARD_EN -#define PCC0_RESET (1 << 6) -#define PCC1_RESET (1 << 7) -#define PCC0_ENABLE (1 << 0) -#define PCC1_ENABLE (1 << 1) - -// IDP_CPLD_PCCARDx_STATUS -#define _PCC_WRPROT (1 << 7) // 7-4 read as low true -#define _PCC_RESET (1 << 6) -#define _PCC_IRQ (1 << 5) -#define _PCC_INPACK (1 << 4) -#define PCC_BVD2 (1 << 3) -#define PCC_BVD1 (1 << 2) -#define PCC_VS2 (1 << 1) -#define PCC_VS1 (1 << 0) - -#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) - -/* A listing of interrupts used by external hardware devices */ - -#define TOUCH_PANEL_IRQ IRQ_GPIO(5) -#define IDE_IRQ IRQ_GPIO(21) - -#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING - -#define ETHERNET_IRQ IRQ_GPIO(4) -#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) -#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH - -#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) -#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH - -#define PCMCIA_S0_RDYINT IRQ_GPIO(19) -#define PCMCIA_S1_RDYINT IRQ_GPIO(22) - - -/* - * Macros for LED Driver - */ - -/* leds 0 = ON */ -#define IDP_HB_LED (1<<5) -#define IDP_BUSY_LED (1<<6) - -#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED) - -/* - * macros for MTD driver - */ - -#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1)) -#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1)) - -/* - * macros for matrix keyboard driver - */ - -#define KEYBD_MATRIX_NUMBER_INPUTS 7 -#define KEYBD_MATRIX_NUMBER_OUTPUTS 14 - -#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE -#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE - -#define KEYBD_MATRIX_SETTLING_TIME_US 100 -#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2 - -#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \ -{\ - IDP_CPLD_KB_COL_LOW = outputs;\ - IDP_CPLD_KB_COL_HIGH = outputs >> 7;\ -} - -#define KEYBD_MATRIX_GET_INPUTS(inputs) \ -{\ - inputs = (IDP_CPLD_KB_ROW & 0x7f);\ -} - - diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h deleted file mode 100644 index af34e0f2f7d..00000000000 --- a/include/asm-arm/arch-pxa/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/io.h - * - * Copied from asm/arch/sa1100/io.h - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h deleted file mode 100644 index 0a50c3c763d..00000000000 --- a/include/asm-arm/arch-pxa/irda.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_OFF 1 -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 - -struct pxaficp_platform_data { - int transceiver_cap; - void (*transceiver_mode)(struct device *dev, int mode); - int (*startup)(struct device *dev); - void (*shutdown)(struct device *dev); -}; - -extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); - -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) -void pxa2xx_transceiver_mode(struct device *dev, int mode); -#endif - -#endif diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h deleted file mode 100644 index 9413121b0ed..00000000000 --- a/include/asm-arm/arch-pxa/irqs.h +++ /dev/null @@ -1,264 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/irqs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#define PXA_IRQ(x) (x) - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ -#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ -#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */ -#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */ -#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */ -#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */ -#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */ -#endif - -#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */ -#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */ -#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */ -#define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */ -#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */ -#define IRQ_USB PXA_IRQ(11) /* USB Service */ -#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */ -#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */ -#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */ -#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */ -#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */ -#define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */ -#define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */ -#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */ -#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */ -#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */ -#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */ -#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */ -#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/ -#define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */ -#define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */ -#define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */ -#define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */ -#define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */ -#define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */ -#define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */ -#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */ -#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */ - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */ -#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */ -#endif - -#ifdef CONFIG_PXA3xx -#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */ -#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */ -#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */ -#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */ -#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */ -#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */ -#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */ -#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */ -#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */ -#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */ -#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */ -#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */ -#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ -#endif - -#define PXA_GPIO_IRQ_BASE (64) -#define PXA_GPIO_IRQ_NUM (128) - -#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) -#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) - -#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) -#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - -/* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase IRQ_BOARD_END, but keep it - * within sensible limits. - */ -#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) -#define IRQ_BOARD_END (IRQ_BOARD_START + 16) - -#define IRQ_SA1111_START (IRQ_BOARD_END) -#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) -#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) -#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) -#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) -#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) -#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) -#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) -#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) -#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) -#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) -#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) -#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) -#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) -#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) -#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) -#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) -#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) -#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) -#define IRQ_MSTXINT (IRQ_BOARD_END + 18) -#define IRQ_MSRXINT (IRQ_BOARD_END + 19) -#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) -#define IRQ_TPTXINT (IRQ_BOARD_END + 21) -#define IRQ_TPRXINT (IRQ_BOARD_END + 22) -#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) -#define SSPXMTINT (IRQ_BOARD_END + 24) -#define SSPRCVINT (IRQ_BOARD_END + 25) -#define SSPROR (IRQ_BOARD_END + 26) -#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) -#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) -#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) -#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) -#define AUDTFSR (IRQ_BOARD_END + 36) -#define AUDRFSR (IRQ_BOARD_END + 37) -#define AUDTUR (IRQ_BOARD_END + 38) -#define AUDROR (IRQ_BOARD_END + 39) -#define AUDDTS (IRQ_BOARD_END + 40) -#define AUDRDD (IRQ_BOARD_END + 41) -#define AUDSTO (IRQ_BOARD_END + 42) -#define IRQ_USBPWR (IRQ_BOARD_END + 43) -#define IRQ_HCIM (IRQ_BOARD_END + 44) -#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) -#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) -#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) -#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) -#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) -#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) -#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) -#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) -#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) -#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) - -#define IRQ_LOCOMO_START (IRQ_BOARD_END) -#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) -#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) -#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) -#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) -#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) -#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) -#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) -#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) -#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) -#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) -#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) -#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) -#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) -#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) -#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) -#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) -#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) -#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) -#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) -#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) -#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20) -#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) - -/* - * Figure out the MAX IRQ number. - * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 - * Otherwise, we have the standard IRQs only. - */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) -#elif defined(CONFIG_ARCH_LUBBOCK) || \ - defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_TOSA) || \ - defined(CONFIG_MACH_MAINSTONE) || \ - defined(CONFIG_MACH_PCM027) || \ - defined(CONFIG_MACH_MAGICIAN) -#define NR_IRQS (IRQ_BOARD_END) -#elif defined(CONFIG_MACH_ZYLONITE) -#define NR_IRQS (IRQ_BOARD_START + 32) -#else -#define NR_IRQS (IRQ_BOARD_START) -#endif - -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) -#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) -#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) -#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ -#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3) -#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4) -#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5) -#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ -#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) - -#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) -#define LPD270_USBC_IRQ LPD270_IRQ(2) -#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) -#define LPD270_AC97_IRQ LPD270_IRQ(4) - -#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) -#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) -#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) -#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) -#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3) -#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4) -#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5) -#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6) -#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7) -#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9) -#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10) -#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11) -#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13) -#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) -#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) - -/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ -#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) -#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) -#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) -#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) - -/* phyCORE-PXA270 (PCM027) Interrupts */ -#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) -#define PCM027_BTDET_IRQ PCM027_IRQ(0) -#define PCM027_FF_RI_IRQ PCM027_IRQ(1) -#define PCM027_MMCDET_IRQ PCM027_IRQ(2) -#define PCM027_PM_5V_IRQ PCM027_IRQ(3) - -/* ITE8152 irqs */ -/* add IT8152 IRQs beyond BOARD_END */ -#ifdef CONFIG_PCI_HOST_ITE8152 -#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) - -/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ -#define IT8152_LD_IRQ_COUNT 9 -#define IT8152_LP_IRQ_COUNT 16 -#define IT8152_PD_IRQ_COUNT 15 - -/* Priorities: */ -#define IT8152_PD_IRQ(i) IT8152_IRQ(i) -#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) -#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) - -#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) - -#if NR_IRQS < (IT8152_LAST_IRQ+1) -#undef NR_IRQS -#define NR_IRQS (IT8152_LAST_IRQ+1) -#endif - -#endif /* CONFIG_PCI_HOST_ITE8152 */ diff --git a/include/asm-arm/arch-pxa/littleton.h b/include/asm-arm/arch-pxa/littleton.h deleted file mode 100644 index 79d209b826f..00000000000 --- a/include/asm-arm/arch-pxa/littleton.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_ZYLONITE_H -#define __ASM_ARCH_ZYLONITE_H - -#define LITTLETON_ETH_PHYS 0x30000000 - -#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h deleted file mode 100644 index 501d240ac12..00000000000 --- a/include/asm-arm/arch-pxa/lpd270.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-arm/arch-pxa/lpd270.h - * - * Author: Lennert Buytenhek - * Created: Feb 10, 2006 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_LPD270_H -#define __ASM_ARCH_LPD270_H - -#define LPD270_CPLD_PHYS PXA_CS2_PHYS -#define LPD270_CPLD_VIRT 0xf0000000 -#define LPD270_CPLD_SIZE 0x00100000 - -#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) - -/* CPLD registers */ -#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) -#define LPD270_CONTROL LPD270_CPLD_REG(0x00) -#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) -#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) -#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14) -#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20) -#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24) -#define LPD270_EGPIO LPD270_CPLD_REG(0x30) -#define LPD270_INT_MASK LPD270_CPLD_REG(0x40) -#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50) - -#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ -#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ -#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */ - - -#endif diff --git a/include/asm-arm/arch-pxa/lubbock.h b/include/asm-arm/arch-pxa/lubbock.h deleted file mode 100644 index 11ee73593fc..00000000000 --- a/include/asm-arm/arch-pxa/lubbock.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/lubbock.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS - -#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS -#define LUBBOCK_FPGA_VIRT (0xf0000000) -#define LUB_P2V(x) ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT) -#define LUB_V2P(x) ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS) - -#ifndef __ASSEMBLY__ -# define __LUB_REG(x) (*((volatile unsigned long *)LUB_P2V(x))) -#else -# define __LUB_REG(x) LUB_P2V(x) -#endif - -/* FPGA register virtual addresses */ -#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000) -#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) -#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040) -#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050) -#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060) -#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) -#define LUB_MISC_RD __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090) -#define LUB_IRQ_MASK_EN __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0) -#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0) -#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100) - -#ifndef __ASSEMBLY__ -extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); -#endif diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h deleted file mode 100644 index 169b374f992..00000000000 --- a/include/asm-arm/arch-pxa/magician.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * GPIO and IRQ definitions for HTC Magician PDA phones - * - * Copyright (c) 2007 Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _MAGICIAN_H_ -#define _MAGICIAN_H_ - -#include - -/* - * PXA GPIOs - */ - -#define GPIO0_MAGICIAN_KEY_POWER 0 -#define GPIO9_MAGICIAN_UNKNOWN 9 -#define GPIO10_MAGICIAN_GSM_IRQ 10 -#define GPIO11_MAGICIAN_GSM_OUT1 11 -#define GPIO13_MAGICIAN_CPLD_IRQ 13 -#define GPIO18_MAGICIAN_UNKNOWN 18 -#define GPIO22_MAGICIAN_VIBRA_EN 22 -#define GPIO26_MAGICIAN_GSM_POWER 26 -#define GPIO27_MAGICIAN_USBC_PUEN 27 -#define GPIO30_MAGICIAN_nCHARGE_EN 30 -#define GPIO37_MAGICIAN_KEY_HANGUP 37 -#define GPIO38_MAGICIAN_KEY_CONTACTS 38 -#define GPIO40_MAGICIAN_GSM_OUT2 40 -#define GPIO48_MAGICIAN_UNKNOWN 48 -#define GPIO56_MAGICIAN_UNKNOWN 56 -#define GPIO57_MAGICIAN_CAM_RESET 57 -#define GPIO75_MAGICIAN_SAMSUNG_POWER 75 -#define GPIO83_MAGICIAN_nIR_EN 83 -#define GPIO86_MAGICIAN_GSM_RESET 86 -#define GPIO87_MAGICIAN_GSM_SELECT 87 -#define GPIO90_MAGICIAN_KEY_CALENDAR 90 -#define GPIO91_MAGICIAN_KEY_CAMERA 91 -#define GPIO93_MAGICIAN_KEY_UP 93 -#define GPIO94_MAGICIAN_KEY_DOWN 94 -#define GPIO95_MAGICIAN_KEY_LEFT 95 -#define GPIO96_MAGICIAN_KEY_RIGHT 96 -#define GPIO97_MAGICIAN_KEY_ENTER 97 -#define GPIO98_MAGICIAN_KEY_RECORD 98 -#define GPIO99_MAGICIAN_HEADPHONE_IN 99 -#define GPIO100_MAGICIAN_KEY_VOL_UP 100 -#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 -#define GPIO102_MAGICIAN_KEY_PHONE 102 -#define GPIO103_MAGICIAN_LED_KP 103 -#define GPIO104_MAGICIAN_LCD_POWER_1 104 -#define GPIO105_MAGICIAN_LCD_POWER_2 105 -#define GPIO106_MAGICIAN_LCD_POWER_3 106 -#define GPIO107_MAGICIAN_DS1WM_IRQ 107 -#define GPIO108_MAGICIAN_GSM_READY 108 -#define GPIO114_MAGICIAN_UNKNOWN 114 -#define GPIO115_MAGICIAN_nPEN_IRQ 115 -#define GPIO116_MAGICIAN_nCAM_EN 116 -#define GPIO119_MAGICIAN_UNKNOWN 119 -#define GPIO120_MAGICIAN_UNKNOWN 120 - -/* - * CPLD IRQs - */ - -#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) -#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) -#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) -#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) - -/* - * CPLD EGPIOs - */ - -#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ -#define MAGICIAN_EGPIO(reg,bit) \ - (MAGICIAN_EGPIO_BASE + 8*reg + bit) - -/* output */ - -#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) -#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) -#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) -#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) -#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) -#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) -#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) -#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) -#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) -#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) -#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) -#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) -#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) -#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) -#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) -#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) -#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) -#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) - -/* input */ - -#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) -#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) - -#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) -#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) -#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) -#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) -#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) - -#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) - -#endif /* _MAGICIAN_H_ */ diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h deleted file mode 100644 index 14c862adcaa..00000000000 --- a/include/asm-arm/arch-pxa/mainstone.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mainstone.h - * - * Author: Nicolas Pitre - * Created: Nov 14, 2002 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ASM_ARCH_MAINSTONE_H -#define ASM_ARCH_MAINSTONE_H - -#define MST_ETH_PHYS PXA_CS4_PHYS - -#define MST_FPGA_PHYS PXA_CS2_PHYS -#define MST_FPGA_VIRT (0xf0000000) -#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT) -#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS) - -#ifndef __ASSEMBLY__ -# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x))) -#else -# define __MST_REG(x) MST_P2V(x) -#endif - -/* board level registers in the FPGA */ - -#define MST_LEDDAT1 __MST_REG(0x08000010) -#define MST_LEDDAT2 __MST_REG(0x08000014) -#define MST_LEDCTRL __MST_REG(0x08000040) -#define MST_GPSWR __MST_REG(0x08000060) -#define MST_MSCWR1 __MST_REG(0x08000080) -#define MST_MSCWR2 __MST_REG(0x08000084) -#define MST_MSCWR3 __MST_REG(0x08000088) -#define MST_MSCRD __MST_REG(0x08000090) -#define MST_INTMSKENA __MST_REG(0x080000c0) -#define MST_INTSETCLR __MST_REG(0x080000d0) -#define MST_PCMCIA0 __MST_REG(0x080000e0) -#define MST_PCMCIA1 __MST_REG(0x080000e4) - -#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */ -#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */ -#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */ -#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */ -#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */ -#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */ -#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */ -#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */ -#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */ - -#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */ -#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */ -#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */ -#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */ -#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */ - -#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */ -#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */ -#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */ -#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */ -#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */ - -#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */ -#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */ -#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */ -#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */ -#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */ -#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */ -#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */ - -#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */ -#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */ -#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */ - -#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */ -#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */ -#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */ -#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */ -#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */ -#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */ -#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */ -#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */ -#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */ -#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */ - -#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */ -#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */ -#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */ -#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */ -#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */ -#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */ -#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */ -#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */ -#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */ -#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ -#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ -#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */ -#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */ -#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */ - -#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */ -#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */ -#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */ -#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */ -#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */ -#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */ -#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */ -#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */ - -#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */ -#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/ -#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */ -#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */ -#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */ -#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ - -#endif diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h deleted file mode 100644 index bee81d66c18..00000000000 --- a/include/asm-arm/arch-pxa/memory.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/memory.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xa0000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * The nodes are matched with the physical SDRAM banks as follows: - * - * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff - * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff - * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff - * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff - * - * This needs a node mem size of 26 bits. - */ -#define NODE_MEM_SIZE_BITS 26 - -#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -void cmx270_pci_adjust_zones(int node, unsigned long *size, - unsigned long *holes); - -#define arch_adjust_zones(node, size, holes) \ - cmx270_pci_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) -#endif - -#endif diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h deleted file mode 100644 index 0499323010b..00000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa25x.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA25X_H -#define __ASM_ARCH_MFP_PXA25X_H - -#include -#include - -/* GPIO */ -#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0) -#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0) -#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0) -#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0) -#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0) -#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0) -#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0) - -#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1) - -/* Crystal and Clock Signals */ -#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) -#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) -#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW) -#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) -#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW) -#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) -#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW) - -/* SDRAM and Static Memory I/O Signals */ -#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) -#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) -#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) -#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) -#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) - -/* Miscellaneous I/O and DMA Signals */ -#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) -#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) -#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1) - -/* Alternate Bus Master Mode I/O Signals */ -#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW) -#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW) -#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1) -#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1) - -/* PC CARD */ -#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH) -#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH) -#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) -#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) -#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) -#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) -#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) -#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) -#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) -#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) - -/* FFUART */ -#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) -#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) -#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) -#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) -#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) -#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) -#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) -#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) - -/* BTUART */ -#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) -#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) -#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) -#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) - -/* STUART */ -#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) -#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) - -/* HWUART */ -#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3) -#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH) -#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3) -#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH) -#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH) -#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1) -#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1) -#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH) - -/* FICP */ -#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) -#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) - -/* PWM 0/1 */ -#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) -#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) - -/* AC97 */ -#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) -#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) -#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) -#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) -#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1) - -/* I2S */ -#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) -#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) -#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) -#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) -#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) -#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) - -/* SSP 1 */ -#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) -#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW) -#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) -#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) -#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1) - -/* SSP 2 - NSSP */ -#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) -#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1) -#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW) -#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1) -#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW) -#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2) -#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW) -#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2) - -/* MMC */ -#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW) -#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW) -#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) -#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW) -#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) -#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) -#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW) -#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW) -#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW) -#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW) - -/* LCD */ -#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) -#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) -#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) -#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) -#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) -#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) -#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) -#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) -#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) -#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) -#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) -#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) -#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) -#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) -#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) -#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) -#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) -#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) -#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) -#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) - -#endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h deleted file mode 100644 index bc73ab84167..00000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa27x.h +++ /dev/null @@ -1,433 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA27X_H -#define __ASM_ARCH_MFP_PXA27X_H - -/* - * NOTE: for those special-function bidirectional GPIOs, as described - * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input - * alternative is preserved, the direction is actually selected by the - * specific controller, and this should work in most cases. - */ - -#include -#include - -/* GPIO */ -#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0) -#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) -#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0) -#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0) -#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0) -#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0) -#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0) -#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0) -#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0) -#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0) -#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0) -#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0) -#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0) -#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0) -#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0) -#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0) -#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0) -#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0) -#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0) -#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0) -#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0) -#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0) -#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0) -#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0) -#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0) -#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0) -#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0) -#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0) -#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0) -#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0) -#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0) -#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0) -#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0) -#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0) -#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0) -#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0) - -/* Crystal and Clock Signals */ -#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) -#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) -#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW) -#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW) -#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1) - -/* OS Timer Signals */ -#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1) -#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1) -#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW) -#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW) -#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) -#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) - -/* SDRAM and Static Memory I/O Signals */ -#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH) -#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH) -#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) -#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) -#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) -#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) -#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) - -/* Miscellaneous I/O and DMA Signals */ -#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH) -#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH) -#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH) -#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH) -#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) -#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) -#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1) -#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1) -#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2) -#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2) -#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2) - -/* Alternate Bus Master Mode I/O Signals */ -#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2) -#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2) -#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2) -#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3) -#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW) -#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW) -#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW) -#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW) - -/* PC CARD */ -#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH) -#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH) -#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH) -#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH) -#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) -#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH) -#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1) -#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) -#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) -#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) -#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) -#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) -#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) -#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) -#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) -#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH) - -/* I2C */ -#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) -#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1) - -/* FFUART */ -#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3) -#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3) -#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) -#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3) -#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1) -#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) -#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2) -#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) -#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) -#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3) -#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3) -#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1) -#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) -#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1) -#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1) -#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1) -#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3) -#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3) -#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH) -#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH) -#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) -#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH) -#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH) -#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH) -#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) -#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH) -#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH) -#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) -#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH) - -/* BTUART */ -#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) -#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) -#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) -#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) - -/* STUART */ -#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) -#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) - -/* FICP */ -#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2) -#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) -#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH) -#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) - -/* PWM 0/1/2/3 */ -#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW) -#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW) -#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) -#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) -#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW) -#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW) -#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW) -#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW) -#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW) -#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW) - -/* AC97 */ -#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) -#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW) -#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) -#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW) -#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW) -#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW) -#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW) -#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW) -#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW) -#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) -#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) -#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2) -#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2) - -/* I2S */ -#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) -#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) -#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) -#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) -#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) -#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW) - -/* SSP 1 */ -#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) -#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3) -#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) -#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW) -#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2) -#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3) -#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) -#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW) -#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) -#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2) - -/* SSP 2 */ -#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1) -#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3) -#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW) -#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2) -#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3) -#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW) -#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2) -#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2) -#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW) -#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3) -#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW) -#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW) -#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW) -#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW) -#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2) -#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW) -#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1) -#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1) -#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2) -#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1) -#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1) -#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2) -#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2) - -/* SSP 3 */ -#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3) -#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW) -#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2) -#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1) -#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW) -#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3) -#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3) -#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1) -#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW) -#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW) -#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) -#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3) -#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1) -#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1) - -/* MMC */ -#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW) -#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1) -#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1) -#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1) -#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1) -#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1) - -/* LCD */ -#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) -#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) -#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) -#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) -#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) -#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) -#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) -#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) -#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) -#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) -#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) -#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) -#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) -#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) -#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) -#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) -#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW) -#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW) -#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) -#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) -#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) -#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) -#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1) -#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW) - -/* Keypad */ -#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1) -#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1) -#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1) -#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1) -#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1) -#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1) -#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1) -#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2) -#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1) -#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1) -#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1) -#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2) -#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3) -#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3) -#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3) -#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2) -#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1) -#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1) -#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1) -#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3) -#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1) -#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1) -#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3) -#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3) -#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3) -#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH) -#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH) -#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH) -#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH) -#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH) -#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH) -#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH) -#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH) -#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH) -#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH) -#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH) - -/* USB P3 */ -#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3) -#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3) -#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) -#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) -#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW) -#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3) -#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3) -#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2) -#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2) -#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3) - -/* USB P2 */ -#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW) -#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2) -#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW) -#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW) -#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3) -#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) -#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3) -#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2) -#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2) - -/* USB Host Port 1/2 */ -#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1) -#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW) -#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1) -#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW) - -/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */ -#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2) -#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1) -#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2) -#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2) -#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW) -#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1) -#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1) -#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2) -#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3) -#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW) -#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3) -#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3) -#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3) -#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1) -#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1) -#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1) -#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1) -#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1) -#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW) -#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3) -#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1) -#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2) -#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3) -#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3) -#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3) -#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3) -#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3) -#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3) -#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2) -#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2) -#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2) -#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2) -#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1) -#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1) -#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1) -#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1) -#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1) -#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1) -#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1) - -/* Universal Subscriber ID Interface */ -#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW) -#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW) -#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW) -#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW) -#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW) -#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW) -#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW) -#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3) -#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW) -#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW) - -/* Mobile Scalable Link (MSL) Interface */ -#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW) -#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW) -#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW) -#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW) -#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW) -#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) -#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2) -#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2) -#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2) -#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2) -#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2) -#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2) -#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2) -#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW) - -/* Memory Stick Host Controller */ -#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW) -#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2) -#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) -#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) - -extern int keypad_set_wake(unsigned int on); -#endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h deleted file mode 100644 index 8de1c0dae62..00000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h +++ /dev/null @@ -1,133 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA2XX_H -#define __ASM_ARCH_MFP_PXA2XX_H - -#include - -/* - * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: - * - * MFP_PIN(x) - * MFP_AFx - * MFP_LPM_DRIVE_{LOW, HIGH} - * MFP_LPM_EDGE_x - * - * other MFP_x bit definitions will be ignored - * - * and adds the below two bits specifically for pxa2xx: - * - * bit 23 - Input/Output (PXA2xx specific) - * bit 24 - Wakeup Enable(PXA2xx specific) - */ - -#define MFP_DIR_IN (0x0 << 23) -#define MFP_DIR_OUT (0x1 << 23) -#define MFP_DIR_MASK (0x1 << 23) -#define MFP_DIR(x) (((x) >> 23) & 0x1) - -#define MFP_LPM_CAN_WAKEUP (0x1 << 24) -#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) -#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) -#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) - -/* specifically for enabling wakeup on keypad GPIOs */ -#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP) - -#define MFP_CFG_IN(pin, af) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN)) - -/* NOTE: pins configured as output _must_ provide a low power state, - * and this state should help to minimize the power dissipation. - */ -#define MFP_CFG_OUT(pin, af, state) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) - -/* Common configurations for pxa25x and pxa27x - * - * Note: pins configured as GPIO are always initialized to input - * so not to cause any side effect - */ -#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0) -#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0) -#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0) -#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0) -#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0) -#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0) -#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0) -#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0) -#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0) -#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0) -#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0) -#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0) -#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0) -#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0) -#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0) -#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0) -#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0) -#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0) -#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0) -#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0) -#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0) -#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0) -#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0) -#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0) -#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0) -#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0) -#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0) -#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0) -#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0) -#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0) -#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0) -#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0) -#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0) -#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0) -#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0) -#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0) -#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0) -#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0) -#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0) -#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0) -#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0) -#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0) -#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0) -#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0) -#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0) -#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0) -#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0) -#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0) -#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0) -#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0) -#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0) -#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0) -#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0) -#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0) -#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0) -#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0) -#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0) -#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0) -#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0) -#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0) -#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0) -#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0) -#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0) -#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0) -#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0) -#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0) -#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0) -#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0) -#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0) -#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0) -#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0) -#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0) -#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0) -#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0) -#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0) -#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0) -#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0) -#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) - -extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); -extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm); -extern int gpio_set_wake(unsigned int gpio, unsigned int on); -#endif /* __ASM_ARCH_MFP_PXA2XX_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h deleted file mode 100644 index bb410313556..00000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa300.h +++ /dev/null @@ -1,575 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp-pxa300.h - * - * PXA300/PXA310 specific MFP configuration definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * 2007-08-21: eric miao - * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_PXA300_H -#define __ASM_ARCH_MFP_PXA300_H - -#include -#include - -/* GPIO */ -#define GPIO46_GPIO MFP_CFG(GPIO46, AF1) -#define GPIO49_GPIO MFP_CFG(GPIO49, AF3) -#define GPIO50_GPIO MFP_CFG(GPIO50, AF2) -#define GPIO51_GPIO MFP_CFG(GPIO51, AF3) -#define GPIO52_GPIO MFP_CFG(GPIO52, AF3) -#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) -#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) -#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) -#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) -#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) -#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) - -#ifdef CONFIG_CPU_PXA310 -#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -#endif - -/* Chip Select */ -#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) - -/* AC97 */ -#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1) -#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1) -#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1) -#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1) -#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1) -#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3) -#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2) -#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3) -#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2) -#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) -#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1) - -/* I2C */ -#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH) -#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH) - -/* QCI */ -#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X) -#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X) -#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X) -#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X) -#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X) -#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X) -#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X) -#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) -#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) -#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) -#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) -#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) -#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) -#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) - -/* KEYPAD */ -#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) -#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT) -#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT) -#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT) -#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT) -#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT) -#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT) -#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT) -#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT) -#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT) -#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT) -#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT) -#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) -#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT) -#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) -#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT) - -#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT) -#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT) -#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT) -#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT) -#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT) -#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT) -#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT) -#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT) -#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT) -#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT) -#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT) -#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT) -#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT) - -#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) -#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH) -#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH) -#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH) -#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH) -#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH) -#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH) -#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH) -#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH) -#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH) -#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH) -#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH) -#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH) -#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) -#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH) -#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH) - -/* LCD */ -#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X) -#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X) -#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X) -#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X) -#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X) -#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X) -#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X) -#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X) -#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X) -#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X) -#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X) -#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X) -#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X) -#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X) -#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) -#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) -#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) -#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) -#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) -#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) -#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) -#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X) -#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) -#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) - -#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) -#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) -#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X) - -/* Mini-LCD */ -#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X) -#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X) -#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X) -#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X) -#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X) -#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X) -#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X) -#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X) -#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X) -#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X) -#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X) -#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X) -#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X) -#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X) -#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X) -#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X) -#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X) -#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X) -#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X) -#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X) - -/* MMC1 */ -#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH) -#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH) -#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH) -#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH) -#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) - -/* MMC2 */ -#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH) -#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH) -#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH) -#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH) -#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH) -#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH) -#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) -#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) -#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH) -#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH) - -/* SSP1 */ -#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1) -#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1) -#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6) -#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2) -#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5) -#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5) -#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1) -#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1) -#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7) -#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2) -#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2) -#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7) -#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5) -#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4) -#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5) -#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6) -#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1) -#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6) -#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6) -#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1) - -/* SSP2 */ -#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2) -#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2) -#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2) -#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2) -#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2) -#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6) -#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6) -#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2) -#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2) -#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2) -#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7) -#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5) -#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4) -#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) -#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) -#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5) -#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2) -#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7) -#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6) -#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4) -#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2) -#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2) -#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4) -#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7) - -/* SSP3 */ -#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW) -#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT) -#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW) -#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT) -#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) -#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT) -#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW) -#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT) -#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW) -#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT) -#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW) -#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) - -/* SSP4 */ -#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH) -#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH) -#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH) -#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH) - -/* UART1 */ -#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT) -#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT) -#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT) -#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT) -#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT) -#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT) - -#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT) -#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT) -#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT) -#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT) -#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT) -#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) - -#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT) -#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT) -#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT) -#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT) -#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT) - -#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT) -#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT) -#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT) -#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT) -#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT) - -#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT) -#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT) -#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT) - -#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT) -#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT) -#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT) - -#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT) -#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT) -#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT) -#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT) -#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT) -#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT) -#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT) - -#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT) -#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT) -#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT) -#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT) -#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT) - -/* UART2 */ -#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT) -#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT) -#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT) -#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT) - -#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT) -#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT) -#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT) -#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT) - -#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT) -#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT) -#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT) -#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT) - -#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT) -#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT) -#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT) -#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT) - -/* UART3 */ -#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT) -#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT) -#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT) -#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT) - -#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT) -#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT) -#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT) -#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT) - -#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT) -#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) -#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT) -#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT) -#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT) -#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) - -#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT) -#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) -#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT) -#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT) -#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT) -#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) - -/* USB Host */ -#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1) -#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1) - -/* USB P3 */ -#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2) -#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2) -#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2) -#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2) -#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2) -#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2) - -/* PWM */ -#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1) -#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1) -#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1) -#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1) - -/* CIR */ -#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5) -#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3) - -#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5) -#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2) - -#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1) -#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7) -#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6) -#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6) -#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6) -#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6) -#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2) -#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3) -#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7) -#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6) - -#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1) - -#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1) -#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1) -#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1) -#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1) - -#define GPIO9_SCIO MFP_CFG(GPIO9, AF1) -#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4) -#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1) - -/* - * PXA300 specific MFP configurations - */ -#ifdef CONFIG_CPU_PXA300 -#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2) -#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3) -#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4) -#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4) -#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5) -#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2) -#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2) -#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2) -#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2) -#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2) -#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2) -#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2) - -/* U2D UTMI */ -#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1) -#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3) -#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1) -#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5) -#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3) -#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2) -#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5) -#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3) -#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2) -#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1) -#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5) -#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1) -#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3) -#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3) -#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3) -#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4) -#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3) -#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3) -#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3) -#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4) -#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2) -#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7) -#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4) -#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2) -#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3) -#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5) -#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1) -#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2) -#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3) -#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3) -#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2) -#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3) -#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5) -#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3) -#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5) -#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3) -#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4) -#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3) -#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7) -#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5) -#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3) -#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5) -#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3) -#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3) -#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3) -#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3) -#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3) -#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3) -#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3) -#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3) -#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3) -#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3) -#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3) -#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3) -#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3) -#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3) -#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3) -#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3) -#endif /* CONFIG_CPU_PXA300 */ - -/* - * PXA310 specific MFP configurations - */ -#ifdef CONFIG_CPU_PXA310 -/* USB P2 */ -#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1) -#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1) -#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1) -#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1) -#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1) -#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1) - -/* MMC1 */ -#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3) -#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3) - -/* MMC3 */ -#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2) -#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2) -#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1) -#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1) -#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1) -#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1) -#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1) -#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1) - -/* ULPI */ -#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1) -#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3) -#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3) -#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3) -#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3) -#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3) -#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3) -#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3) -#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) -#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) - -#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) -#endif /* CONFIG_CPU_PXA310 */ - -#endif /* __ASM_ARCH_MFP_PXA300_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h deleted file mode 100644 index 576aa46d90f..00000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa320.h +++ /dev/null @@ -1,447 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp-pxa320.h - * - * PXA320 specific MFP configuration definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * 2007-08-21: eric miao - * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_PXA320_H -#define __ASM_ARCH_MFP_PXA320_H - -#include -#include - -/* GPIO */ -#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) -#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) -#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) -#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) -#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) - -#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0) -#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0) -#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0) -#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0) -#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) - -/* Chip Select */ -#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) - -/* AC97 */ -#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1) -#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1) -#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1) -#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1) -#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1) -#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2) -#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2) -#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3) -#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3) -#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1) -#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1) - -/* I2C */ -#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH) -#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH) - -/* QCI */ -#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X) -#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X) -#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X) -#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X) -#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X) -#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X) -#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X) -#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X) -#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X) -#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X) -#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X) -#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X) -#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X) -#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X) - -#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5) - -#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3) -#define GPIO0_DRQ MFP_CFG(GPIO0, AF2) -#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5) -#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6) -#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1) -#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4) -#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1) -#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1) - -#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT) -#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT) -#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT) - -#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT) -#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT) -#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT) - -#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT) - -#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT) -#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT) - -#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) - -#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT) -#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT) -#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT) - -#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH) -#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH) -#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH) - -#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH) -#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH) -#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) - -/* LCD */ -#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X) -#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X) -#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X) -#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X) -#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X) -#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X) -#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X) -#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X) -#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X) -#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X) -#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X) -#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X) -#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X) -#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X) -#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X) -#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X) -#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X) -#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X) -#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X) -#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X) -#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X) -#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X) -#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X) -#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X) -#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X) -#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X) - -#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X) -#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X) -#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X) -#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X) -#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X) -#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X) -#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X) -#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X) -#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X) -#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X) -#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X) -#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X) -#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X) -#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X) -#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X) -#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X) -#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X) -#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X) -#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X) -#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X) -#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X) -#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X) -#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X) -#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X) - -/* MMC1 */ -#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH) -#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH) -#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH) -#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH) -#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH) -#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) -#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH) -#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH) -#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH) -#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH) - -#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH) -#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH) -#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH) -#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH) -#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) - -#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH) -#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH) -#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH) -#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) -#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH) -#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH) -#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH) -#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH) -#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH) -#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH) -#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) - -/* 1-Wire */ -#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT) -#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) - -/* SSP1 */ -#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1) -#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1) -#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1) -#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1) -#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6) -#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1) -#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1) -#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6) - -/* SSP2 */ -#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2) -#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2) -#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2) -#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2) -#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2) -#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5) -#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2) -#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) -#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) - -#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) -#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) -#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) -#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) -#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) -#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) -#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) -#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW) -#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT) -#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW) -#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT) -#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW) - -#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH) -#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH) -#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH) -#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH) -#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH) - -/* UART1 */ -#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT) -#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) -#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) -#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) -#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) -#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) -#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) -#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT) -#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT) -#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) -#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) -#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) -#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) -#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) -#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) -#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT) -#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT) -#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) -#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) -#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) -#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) -#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) -#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) -#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) -#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) - -/* UART2 */ -#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT) -#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT) -#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT) -#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT) -#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) -#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) -#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT) -#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT) - -/* UART3 */ -#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT) -#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT) -#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT) -#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT) -#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT) -#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT) -#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT) -#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) -#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT) -#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT) -#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT) -#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT) -#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT) -#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT) -#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT) -#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT) -#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT) -#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT) - - -/* USB 2.0 UTMI */ -#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1) -#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3) -#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1) -#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5) -#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3) -#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2) -#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5) -#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3) -#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1) -#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5) -#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1) -#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3) -#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3) -#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3) -#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4) -#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3) -#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3) -#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3) - -#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3) -#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3) -#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3) -#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3) -#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3) -#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3) -#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3) -#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3) - -#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3) -#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3) -#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3) -#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3) -#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3) -#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3) -#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3) -#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3) - -#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4) -#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2) -#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7) - -#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4) -#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2) -#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4) -#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5) - -#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1) -#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2) -#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3) - -#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3) -#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2) -#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3) - -#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5) -#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3) -#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7) -#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5) - -#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4) -#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5) -#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7) - -#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5) -#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3) -#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5) - -/* USB Host 1.1 */ -#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1) -#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1) - -/* USB P2 */ -#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2) -#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4) -#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4) -#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2) -#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2) -#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2) -#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2) -#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2) -#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2) -#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2) - -/* USB P3 */ -#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2) -#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2) -#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2) -#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2) -#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2) -#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2) - -#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6) -#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6) - -#define GPIO2_RDY MFP_CFG(GPIO2, AF1) -#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) - -#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) -#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) -#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1) -#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1) - -#endif /* __ASM_ARCH_MFP_PXA320_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/include/asm-arm/arch-pxa/mfp-pxa3xx.h deleted file mode 100644 index 1f6b35c015d..00000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa3xx.h +++ /dev/null @@ -1,252 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA3XX_H -#define __ASM_ARCH_MFP_PXA3XX_H - -#define MFPR_BASE (0x40e10000) -#define MFPR_SIZE (PAGE_SIZE) - -/* MFPR register bit definitions */ -#define MFPR_PULL_SEL (0x1 << 15) -#define MFPR_PULLUP_EN (0x1 << 14) -#define MFPR_PULLDOWN_EN (0x1 << 13) -#define MFPR_SLEEP_SEL (0x1 << 9) -#define MFPR_SLEEP_OE_N (0x1 << 7) -#define MFPR_EDGE_CLEAR (0x1 << 6) -#define MFPR_EDGE_FALL_EN (0x1 << 5) -#define MFPR_EDGE_RISE_EN (0x1 << 4) - -#define MFPR_SLEEP_DATA(x) ((x) << 8) -#define MFPR_DRIVE(x) (((x) & 0x7) << 10) -#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) - -#define MFPR_EDGE_NONE (0) -#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) -#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) -#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) - -/* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) - * - * Input 0 X(0) X(0) X(0) 0 - * Drive 0 0 0 0 X(1) 0 - * Drive 1 0 1 X(1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFPR_LPM_INPUT (0) -#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) -#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) -#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) -#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) -#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) -#define MFPR_LPM_MASK (0xe080) - -/* - * The pullup and pulldown state of the MFP pin at run mode is by default - * determined by the selected alternate function. In case that some buggy - * devices need to override this default behavior, the definitions below - * indicates the setting of corresponding MFPR bits - * - * Definition pull_sel pullup_en pulldown_en - * MFPR_PULL_NONE 0 0 0 - * MFPR_PULL_LOW 1 0 1 - * MFPR_PULL_HIGH 1 1 0 - * MFPR_PULL_BOTH 1 1 1 - */ -#define MFPR_PULL_NONE (0) -#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) -#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) -#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) - -/* PXA3xx common MFP configurations - processor specific ones defined - * in mfp-pxa300.h and mfp-pxa320.h - */ -#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) -#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) -#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) -#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) -#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) -#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) -#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) -#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) -#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) -#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) -#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) -#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) -#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) -#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) -#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) -#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) -#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) -#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) -#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) -#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) -#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) -#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) -#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) -#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) -#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) -#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) -#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) -#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) -#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) -#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) -#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) -#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) -#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) -#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) -#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) -#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) -#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) -#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) -#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) -#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) -#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) -#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) -#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) -#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) -#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) -#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) - -#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) -#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) - -#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) -#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) -#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) - -#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) - -#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) -#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) -#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) -#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) -#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) -#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) -#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) -#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) -#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) -#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) -#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) -#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) -#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) -#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) -#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) -#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) -#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) -#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) -#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) -#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) -#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) -#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) -#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) -#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) -#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) -#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) -#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) -#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) -#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) -#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) -#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) -#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) -#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) -#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) -#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) -#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) -#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) -#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) -#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) -#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) -#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) -#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) -#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) -#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) -#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) -#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) -#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) -#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) -#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) -#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) -#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) -#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) -#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) -#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) -#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) -#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) -#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) -#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) -#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) -#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) -#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) -#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) -#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) -#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) -#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) - -#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) -#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) -#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) -#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) -#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) -#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) -#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) - -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by pxa3xx_mfp_init_addr() - * - * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" - * structure, which represents a range of MFP pins from "start" to - * "end", with the offset begining at "offset", to define a single - * pin, let "end" = -1 - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct pxa3xx_mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -/* - * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access - * to the MFPR register - */ -unsigned long pxa3xx_mfp_read(int mfp); -void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); - -/* - * pxa3xx_mfp_config - configure the MFPR registers - * - * used by board specific initialization code - */ -void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); - -/* - * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin - * index and MFPR register offset - * - * used by processor specific code - */ -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -void __init pxa3xx_init_mfp(void); -#endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/include/asm-arm/arch-pxa/mfp-pxa930.h deleted file mode 100644 index c4e945ab192..00000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa930.h +++ /dev/null @@ -1,491 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp-pxa930.h - * - * PXA930 specific MFP configuration definitions - * - * Copyright (C) 2007-2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_PXA9xx_H -#define __ASM_ARCH_MFP_PXA9xx_H - -#include -#include - -/* GPIO */ -#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) -#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) -#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) -#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) -#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) -#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) -#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) -#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) -#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) -#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) -#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) - -#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0) -#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0) -#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0) -#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0) - -#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0) -#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0) -#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0) -#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0) -#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0) -#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0) -#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0) -#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0) -#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0) -#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0) -#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0) -#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0) -#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0) -#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0) -#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0) -#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0) -#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0) -#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0) -#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0) -#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0) -#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0) -#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0) -#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0) -#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0) -#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0) - -#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0) -#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0) -#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0) -#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0) -#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0) -#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0) -#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0) -#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0) -#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0) -#define RDY_GPIO_62 MFP_CFG(RDY, AF0) - -/* Chip Select */ -#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH) -#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH) - -/* AC97 */ -#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3) -#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3) -#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3) -#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3) -#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3) -#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3) - -/* I2C */ -#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH) -#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH) - -#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH) -#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH) - -#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH) -#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH) - -#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH) -#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH) - -#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH) -#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH) - -#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) - -#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH) -#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH) - -/* QCI */ -#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW) -#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW) -#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW) -#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW) -#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW) -#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW) -#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW) -#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW) -#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW) -#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW) -#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW) -#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW) -#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW) -#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW) - -/* KEYPAD */ -#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT) -#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT) -#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT) -#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT) -#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT) -#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT) -#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT) -#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT) - -#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT) -#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT) -#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT) -#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT) - -#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT) -#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT) -#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT) -#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT) -#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT) -#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT) - -#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT) -#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT) -#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT) -#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT) -#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT) -#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT) -#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT) -#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1) -#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4) - -#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH) -#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH) -#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH) -#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) -#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH) -#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH) -#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH) -#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH) -#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH) - -/* LCD */ -#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1) -#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1) -#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1) -#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1) -#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1) -#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2) -#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1) -#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1) -#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1) -#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1) -#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1) -#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1) -#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1) -#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1) -#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1) -#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1) -#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1) -#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1) -#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1) -#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1) -#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1) -#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1) -#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1) -#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1) -#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1) -#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3) -#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3) -#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1) - -/* Mini-LCD */ -#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3) -#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3) -#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3) -#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3) -#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3) -#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3) -#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3) -#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3) -#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3) -#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3) -#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3) -#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3) -#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3) -#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3) -#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3) -#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3) -#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3) -#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3) -#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3) -#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3) -#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5) - -/* MMC1 */ -#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4) -#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4) -#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4) -#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4) -#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4) -#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4) -#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3) -#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3) -#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3) -#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3) -#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3) -#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3) - -#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2) -#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2) -#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2) -#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3) -#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2) - -/* MMC2 */ -#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7) -#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7) -#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7) -#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7) -#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7) -#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7) - -#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1) -#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1) -#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1) -#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1) -#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1) -#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1) - -#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3) -#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3) -#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3) -#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3) -#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3) -#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3) - -/* BSSP1 */ -#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3) -#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3) -#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3) -#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3) -#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5) -#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5) - -/* BSSP2 */ -#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1) -#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1) -#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1) -#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1) -#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1) -#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4) - -/* BSSP3 */ -#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1) -#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1) -#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1) -#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1) -#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1) - -/* BSSP4 */ -#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4) -#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4) -#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4) -#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4) - -#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4) -#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4) -#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4) -#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4) - -/* GSSP1 */ -#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2) -#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2) -#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2) -#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2) -#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2) - -#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4) -#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4) -#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4) -#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4) - -/* GSSP2 */ -#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4) -#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4) -#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4) -#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4) - -#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4) -#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4) -#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4) -#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4) - -#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2) -#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2) -#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2) -#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2) -#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2) -#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5) - -#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2) -#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2) -#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2) -#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2) - -/* UART1 - FFUART */ -#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1) -#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1) -#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1) -#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1) -#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1) -#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1) -#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1) -#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1) - -#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2) -#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2) -#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2) -#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2) -#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2) -#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2) -#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2) -#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2) - -/* UART2 - BTUART */ -#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1) -#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1) -#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1) -#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1) - -/* UART3 - STUART */ -#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3) -#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3) -#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3) -#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3) - -#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5) -#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5) -#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5) -#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5) - -/* DFI */ -#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2) -#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2) -#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2) -#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2) -#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2) -#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2) -#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2) -#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2) -#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2) -#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2) -#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2) -#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2) -#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2) -#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2) -#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2) -#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2) -#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2) -#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2) -#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2) -#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2) -#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2) -#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2) - -/* DFI - NAND */ -#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH) -#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW) -#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW) -#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW) -#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW) -#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW) -#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW) -#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW) -#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW) -#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW) -#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW) -#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW) -#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW) -#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW) -#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW) -#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW) -#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW) -#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW) -#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH) -#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH) -#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH) -#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH) -#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH) -#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH) -#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH) - -/* PWM */ -#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW) -#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW) -#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW) -#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW) -#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW) -#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW) - -/* CIR */ -#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1) -#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3) - -/* USB P2 */ -#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3) -#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5) -#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2) -#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7) -#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6) -#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3) - -#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2) -#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT) -#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2) -#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2) -#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2) -#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2) -#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2) -#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2) - -#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3) -#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3) -#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3) -#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3) -#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3) -#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3) -#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3) -#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3) - -/* ULPI */ -#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4) -#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7) -#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5) -#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5) -#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5) -#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5) -#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5) -#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5) -#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4) -#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4) -#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4) -#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4) - -#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3) -#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7) -#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5) -#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4) -#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3) -#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3) - -#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5) -#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7) -#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5) -#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4) - -#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3) -#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7) -#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3) -#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5) -#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4) -#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3) - -/* 1 wire */ -#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5) - -#endif /* __ASM_ARCH_MFP_PXA9xx_H */ diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h deleted file mode 100644 index e7d58798da6..00000000000 --- a/include/asm-arm/arch-pxa/mfp.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp.h - * - * Multi-Function Pin Definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * - * 2007-8-21: eric miao - * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_H -#define __ASM_ARCH_MFP_H - -#define mfp_to_gpio(m) ((m) % 128) - -/* list of all the configurable MFP pins */ -enum { - MFP_PIN_INVALID = -1, - - MFP_PIN_GPIO0 = 0, - MFP_PIN_GPIO1, - MFP_PIN_GPIO2, - MFP_PIN_GPIO3, - MFP_PIN_GPIO4, - MFP_PIN_GPIO5, - MFP_PIN_GPIO6, - MFP_PIN_GPIO7, - MFP_PIN_GPIO8, - MFP_PIN_GPIO9, - MFP_PIN_GPIO10, - MFP_PIN_GPIO11, - MFP_PIN_GPIO12, - MFP_PIN_GPIO13, - MFP_PIN_GPIO14, - MFP_PIN_GPIO15, - MFP_PIN_GPIO16, - MFP_PIN_GPIO17, - MFP_PIN_GPIO18, - MFP_PIN_GPIO19, - MFP_PIN_GPIO20, - MFP_PIN_GPIO21, - MFP_PIN_GPIO22, - MFP_PIN_GPIO23, - MFP_PIN_GPIO24, - MFP_PIN_GPIO25, - MFP_PIN_GPIO26, - MFP_PIN_GPIO27, - MFP_PIN_GPIO28, - MFP_PIN_GPIO29, - MFP_PIN_GPIO30, - MFP_PIN_GPIO31, - MFP_PIN_GPIO32, - MFP_PIN_GPIO33, - MFP_PIN_GPIO34, - MFP_PIN_GPIO35, - MFP_PIN_GPIO36, - MFP_PIN_GPIO37, - MFP_PIN_GPIO38, - MFP_PIN_GPIO39, - MFP_PIN_GPIO40, - MFP_PIN_GPIO41, - MFP_PIN_GPIO42, - MFP_PIN_GPIO43, - MFP_PIN_GPIO44, - MFP_PIN_GPIO45, - MFP_PIN_GPIO46, - MFP_PIN_GPIO47, - MFP_PIN_GPIO48, - MFP_PIN_GPIO49, - MFP_PIN_GPIO50, - MFP_PIN_GPIO51, - MFP_PIN_GPIO52, - MFP_PIN_GPIO53, - MFP_PIN_GPIO54, - MFP_PIN_GPIO55, - MFP_PIN_GPIO56, - MFP_PIN_GPIO57, - MFP_PIN_GPIO58, - MFP_PIN_GPIO59, - MFP_PIN_GPIO60, - MFP_PIN_GPIO61, - MFP_PIN_GPIO62, - MFP_PIN_GPIO63, - MFP_PIN_GPIO64, - MFP_PIN_GPIO65, - MFP_PIN_GPIO66, - MFP_PIN_GPIO67, - MFP_PIN_GPIO68, - MFP_PIN_GPIO69, - MFP_PIN_GPIO70, - MFP_PIN_GPIO71, - MFP_PIN_GPIO72, - MFP_PIN_GPIO73, - MFP_PIN_GPIO74, - MFP_PIN_GPIO75, - MFP_PIN_GPIO76, - MFP_PIN_GPIO77, - MFP_PIN_GPIO78, - MFP_PIN_GPIO79, - MFP_PIN_GPIO80, - MFP_PIN_GPIO81, - MFP_PIN_GPIO82, - MFP_PIN_GPIO83, - MFP_PIN_GPIO84, - MFP_PIN_GPIO85, - MFP_PIN_GPIO86, - MFP_PIN_GPIO87, - MFP_PIN_GPIO88, - MFP_PIN_GPIO89, - MFP_PIN_GPIO90, - MFP_PIN_GPIO91, - MFP_PIN_GPIO92, - MFP_PIN_GPIO93, - MFP_PIN_GPIO94, - MFP_PIN_GPIO95, - MFP_PIN_GPIO96, - MFP_PIN_GPIO97, - MFP_PIN_GPIO98, - MFP_PIN_GPIO99, - MFP_PIN_GPIO100, - MFP_PIN_GPIO101, - MFP_PIN_GPIO102, - MFP_PIN_GPIO103, - MFP_PIN_GPIO104, - MFP_PIN_GPIO105, - MFP_PIN_GPIO106, - MFP_PIN_GPIO107, - MFP_PIN_GPIO108, - MFP_PIN_GPIO109, - MFP_PIN_GPIO110, - MFP_PIN_GPIO111, - MFP_PIN_GPIO112, - MFP_PIN_GPIO113, - MFP_PIN_GPIO114, - MFP_PIN_GPIO115, - MFP_PIN_GPIO116, - MFP_PIN_GPIO117, - MFP_PIN_GPIO118, - MFP_PIN_GPIO119, - MFP_PIN_GPIO120, - MFP_PIN_GPIO121, - MFP_PIN_GPIO122, - MFP_PIN_GPIO123, - MFP_PIN_GPIO124, - MFP_PIN_GPIO125, - MFP_PIN_GPIO126, - MFP_PIN_GPIO127, - MFP_PIN_GPIO0_2, - MFP_PIN_GPIO1_2, - MFP_PIN_GPIO2_2, - MFP_PIN_GPIO3_2, - MFP_PIN_GPIO4_2, - MFP_PIN_GPIO5_2, - MFP_PIN_GPIO6_2, - MFP_PIN_GPIO7_2, - MFP_PIN_GPIO8_2, - MFP_PIN_GPIO9_2, - MFP_PIN_GPIO10_2, - MFP_PIN_GPIO11_2, - MFP_PIN_GPIO12_2, - MFP_PIN_GPIO13_2, - MFP_PIN_GPIO14_2, - MFP_PIN_GPIO15_2, - MFP_PIN_GPIO16_2, - MFP_PIN_GPIO17_2, - - MFP_PIN_ULPI_STP, - MFP_PIN_ULPI_NXT, - MFP_PIN_ULPI_DIR, - - MFP_PIN_nXCVREN, - MFP_PIN_DF_CLE_nOE, - MFP_PIN_DF_nADV1_ALE, - MFP_PIN_DF_SCLK_E, - MFP_PIN_DF_SCLK_S, - MFP_PIN_nBE0, - MFP_PIN_nBE1, - MFP_PIN_DF_nADV2_ALE, - MFP_PIN_DF_INT_RnB, - MFP_PIN_DF_nCS0, - MFP_PIN_DF_nCS1, - MFP_PIN_nLUA, - MFP_PIN_nLLA, - MFP_PIN_DF_nWE, - MFP_PIN_DF_ALE_nWE, - MFP_PIN_DF_nRE_nOE, - MFP_PIN_DF_ADDR0, - MFP_PIN_DF_ADDR1, - MFP_PIN_DF_ADDR2, - MFP_PIN_DF_ADDR3, - MFP_PIN_DF_IO0, - MFP_PIN_DF_IO1, - MFP_PIN_DF_IO2, - MFP_PIN_DF_IO3, - MFP_PIN_DF_IO4, - MFP_PIN_DF_IO5, - MFP_PIN_DF_IO6, - MFP_PIN_DF_IO7, - MFP_PIN_DF_IO8, - MFP_PIN_DF_IO9, - MFP_PIN_DF_IO10, - MFP_PIN_DF_IO11, - MFP_PIN_DF_IO12, - MFP_PIN_DF_IO13, - MFP_PIN_DF_IO14, - MFP_PIN_DF_IO15, - - /* additional pins on PXA930 */ - MFP_PIN_GSIM_UIO, - MFP_PIN_GSIM_UCLK, - MFP_PIN_GSIM_UDET, - MFP_PIN_GSIM_nURST, - MFP_PIN_PMIC_INT, - MFP_PIN_RDY, - - MFP_PIN_MAX, -}; - -/* - * a possible MFP configuration is represented by a 32-bit integer - * - * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) - * bit 10..12 - Alternate Function Selection - * bit 13..15 - Drive Strength - * bit 16..18 - Low Power Mode State - * bit 19..20 - Low Power Mode Edge Detection - * bit 21..22 - Run Mode Pull State - * - * to facilitate the definition, the following macros are provided - * - * MFP_CFG_DEFAULT - default MFP configuration value, with - * alternate function = 0, - * drive strength = fast 3mA (MFP_DS03X) - * low power mode = default - * edge detection = none - * - * MFP_CFG - default MFPR value with alternate function - * MFP_CFG_DRV - default MFPR value with alternate function and - * pin drive strength - * MFP_CFG_LPM - default MFPR value with alternate function and - * low power mode - * MFP_CFG_X - default MFPR value with alternate function, - * pin drive strength and low power mode - */ - -typedef unsigned long mfp_cfg_t; - -#define MFP_PIN(x) ((x) & 0x3ff) - -#define MFP_AF0 (0x0 << 10) -#define MFP_AF1 (0x1 << 10) -#define MFP_AF2 (0x2 << 10) -#define MFP_AF3 (0x3 << 10) -#define MFP_AF4 (0x4 << 10) -#define MFP_AF5 (0x5 << 10) -#define MFP_AF6 (0x6 << 10) -#define MFP_AF7 (0x7 << 10) -#define MFP_AF_MASK (0x7 << 10) -#define MFP_AF(x) (((x) >> 10) & 0x7) - -#define MFP_DS01X (0x0 << 13) -#define MFP_DS02X (0x1 << 13) -#define MFP_DS03X (0x2 << 13) -#define MFP_DS04X (0x3 << 13) -#define MFP_DS06X (0x4 << 13) -#define MFP_DS08X (0x5 << 13) -#define MFP_DS10X (0x6 << 13) -#define MFP_DS13X (0x7 << 13) -#define MFP_DS_MASK (0x7 << 13) -#define MFP_DS(x) (((x) >> 13) & 0x7) - -#define MFP_LPM_INPUT (0x0 << 16) -#define MFP_LPM_DRIVE_LOW (0x1 << 16) -#define MFP_LPM_DRIVE_HIGH (0x2 << 16) -#define MFP_LPM_PULL_LOW (0x3 << 16) -#define MFP_LPM_PULL_HIGH (0x4 << 16) -#define MFP_LPM_FLOAT (0x5 << 16) -#define MFP_LPM_STATE_MASK (0x7 << 16) -#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) - -#define MFP_LPM_EDGE_NONE (0x0 << 19) -#define MFP_LPM_EDGE_RISE (0x1 << 19) -#define MFP_LPM_EDGE_FALL (0x2 << 19) -#define MFP_LPM_EDGE_BOTH (0x3 << 19) -#define MFP_LPM_EDGE_MASK (0x3 << 19) -#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) - -#define MFP_PULL_NONE (0x0 << 21) -#define MFP_PULL_LOW (0x1 << 21) -#define MFP_PULL_HIGH (0x2 << 21) -#define MFP_PULL_BOTH (0x3 << 21) -#define MFP_PULL_MASK (0x3 << 21) -#define MFP_PULL(x) (((x) >> 21) & 0x3) - -#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ - MFP_LPM_EDGE_NONE | MFP_PULL_NONE) - -#define MFP_CFG(pin, af) \ - ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) - -#define MFP_CFG_DRV(pin, af, drv) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) - -#define MFP_CFG_LPM(pin, af, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) - -#define MFP_CFG_X(pin, af, drv, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) - -#endif /* __ASM_ARCH_MFP_H */ diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h deleted file mode 100644 index 6d1304c9270..00000000000 --- a/include/asm-arm/arch-pxa/mmc.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include -#include - -struct device; -struct mmc_host; - -struct pxamci_platform_data { - unsigned int ocr_mask; /* available voltages */ - unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ - int (*init)(struct device *, irq_handler_t , void *); - int (*get_ro)(struct device *); - void (*setpower)(struct device *, unsigned int); - void (*exit)(struct device *, void *); -}; - -extern void pxa_set_mci_info(struct pxamci_platform_data *info); -extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); -extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); - -#endif diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/include/asm-arm/arch-pxa/mtd-xip.h deleted file mode 100644 index 8704dbceb43..00000000000 --- a/include/asm-arm/arch-pxa/mtd-xip.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ - */ - -#ifndef __ARCH_PXA_MTD_XIP_H__ -#define __ARCH_PXA_MTD_XIP_H__ - -#include - -#define xip_irqpending() (ICIP & ICMR) - -/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) - -/* - * xip_cpu_idle() is used when waiting for a delay equal or larger than - * the system timer tick period. This should put the CPU into idle mode - * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. - */ - -#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) - -#endif /* __ARCH_PXA_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-pxa/ohci.h b/include/asm-arm/arch-pxa/ohci.h deleted file mode 100644 index e848a47128c..00000000000 --- a/include/asm-arm/arch-pxa/ohci.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef ASMARM_ARCH_OHCI_H -#define ASMARM_ARCH_OHCI_H - -struct device; - -struct pxaohci_platform_data { - int (*init)(struct device *); - void (*exit)(struct device *); - - int port_mode; -#define PMM_NPS_MODE 1 -#define PMM_GLOBAL_MODE 2 -#define PMM_PERPORT_MODE 3 - - int power_budget; -}; - -extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); - -#endif diff --git a/include/asm-arm/arch-pxa/palmtx.h b/include/asm-arm/arch-pxa/palmtx.h deleted file mode 100644 index 1e8bccbda51..00000000000 --- a/include/asm-arm/arch-pxa/palmtx.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * GPIOs and interrupts for Palm T|X Handheld Computer - * - * Based on palmld-gpio.h by Alex Osborne - * - * Authors: Marek Vasut - * Cristiano P. - * Jan Herman <2hp@seznam.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _INCLUDE_PALMTX_H_ -#define _INCLUDE_PALMTX_H_ - -/** HERE ARE GPIOs **/ - -/* GPIOs */ -#define GPIO_NR_PALMTX_GPIO_RESET 1 - -#define GPIO_NR_PALMTX_POWER_DETECT 12 /* 90 */ -#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N 10 -#define GPIO_NR_PALMTX_EARPHONE_DETECT 107 - -/* SD/MMC */ -#define GPIO_NR_PALMTX_SD_DETECT_N 14 -#define GPIO_NR_PALMTX_SD_POWER 114 /* probably */ -#define GPIO_NR_PALMTX_SD_READONLY 115 /* probably */ - -/* TOUCHSCREEN */ -#define GPIO_NR_PALMTX_WM9712_IRQ 27 - -/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ -#define GPIO_NR_PALMTX_IR_DISABLE 40 - -/* USB */ -#define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 -#define GPIO_NR_PALMTX_USB_PULLUP 93 - -/* LCD/BACKLIGHT */ -#define GPIO_NR_PALMTX_BL_POWER 84 -#define GPIO_NR_PALMTX_LCD_POWER 96 - -/* LCD BORDER */ -#define GPIO_NR_PALMTX_BORDER_SWITCH 98 -#define GPIO_NR_PALMTX_BORDER_SELECT 22 - -/* BLUETOOTH */ -#define GPIO_NR_PALMTX_BT_POWER 17 -#define GPIO_NR_PALMTX_BT_RESET 83 - -/* PCMCIA (WiFi) */ -#define GPIO_NR_PALMTX_PCMCIA_POWER1 94 -#define GPIO_NR_PALMTX_PCMCIA_POWER2 108 -#define GPIO_NR_PALMTX_PCMCIA_RESET 79 -#define GPIO_NR_PALMTX_PCMCIA_READY 116 - -/* NAND Flash ... this GPIO may be incorrect! */ -#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 - -/* INTERRUPTS */ -#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) -#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) -#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) -#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) - -/** HERE ARE INIT VALUES **/ - -/* Various addresses */ -#define PALMTX_PCMCIA_PHYS 0x28000000 -#define PALMTX_PCMCIA_VIRT 0xf0000000 -#define PALMTX_PCMCIA_SIZE 0x100000 - -#define PALMTX_PHYS_RAM_START 0xa0000000 -#define PALMTX_PHYS_IO_START 0x40000000 - -#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ -#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ - -/* TOUCHSCREEN */ -#define AC97_LINK_FRAME 21 - - -/* BATTERY */ -#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ -#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ -#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ -#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ -#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ -#define PALMTX_MAX_LIFE_MINS 360 /* on-life in minutes */ - -#define PALMTX_BAT_MEASURE_DELAY (HZ * 1) - -/* BACKLIGHT */ -#define PALMTX_MAX_INTENSITY 0xFE -#define PALMTX_DEFAULT_INTENSITY 0x7E -#define PALMTX_LIMIT_MASK 0x7F -#define PALMTX_PRESCALER 0x3F -#define PALMTX_PERIOD_NS 3500 - -#endif diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h deleted file mode 100644 index 7beae1472c3..00000000000 --- a/include/asm-arm/arch-pxa/pcm027.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pcm027.h - * - * (c) 2003 Phytec Messtechnik GmbH - * (c) 2007 Juergen Beisert - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Definitions of CPU card resources only - */ - -/* I2C RTC */ -#define PCM027_RTC_IRQ_GPIO 0 -#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) -#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define ADR_PCM027_RTC 0x51 /* I2C address */ - -/* I2C EEPROM */ -#define ADR_PCM027_EEPROM 0x54 /* I2C address */ - -/* Ethernet chip (SMSC91C111) */ -#define PCM027_ETH_IRQ_GPIO 52 -#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) -#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCM027_ETH_PHYS PXA_CS5_PHYS -#define PCM027_ETH_SIZE (1*1024*1024) - -/* CAN controller SJA1000 (unsupported yet) */ -#define PCM027_CAN_IRQ_GPIO 114 -#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) -#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define PCM027_CAN_PHYS 0x22000000 -#define PCM027_CAN_SIZE 0x100 - -/* SPI GPIO expander (unsupported yet) */ -#define PCM027_EGPIO_IRQ_GPIO 27 -#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) -#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define PCM027_EGPIO_CS 24 -/* - * TODO: Switch this pin from dedicated usage to GPIO if - * more than the MAX7301 device is connected to this SPI bus - */ -#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD - -/* Flash memory */ -#define PCM027_FLASH_PHYS 0x00000000 -#define PCM027_FLASH_SIZE 0x02000000 - -/* onboard LEDs connected to GPIO */ -#define PCM027_LED_CPU 90 -#define PCM027_LED_HEARD_BEAT 91 - -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. - * TODO: Add your own basebaord init function and call it from - * inside pcm027_init(). This example here is for the developmen board. - * Refer pcm990-baseboard.c - */ -extern void pcm990_baseboard_init(void); diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h deleted file mode 100644 index 2e201317906..00000000000 --- a/include/asm-arm/arch-pxa/pcm990_baseboard.h +++ /dev/null @@ -1,275 +0,0 @@ -/* - * include/asm-arm/arch-pxa/pcm990_baseboard.h - * - * (c) 2003 Phytec Messtechnik GmbH - * (c) 2007 Juergen Beisert - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -/* - * definitions relevant only when the PCM-990 - * development base board is in use - */ - -/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ -#define PCM990_CTRL_INT_IRQ_GPIO 9 -#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) -#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ -#define PCM990_CTRL_BASE 0xea000000 -#define PCM990_CTRL_SIZE (1*1024*1024) - -#define PCM990_CTRL_PWR_IRQ_GPIO 14 -#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) -#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -/* visible CPLD (U7) registers */ -#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ -#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */ -#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */ -#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */ - -#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */ -#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */ -#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */ -#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */ - -#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */ -#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */ -#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */ -#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */ - -#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */ -#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */ -#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */ -#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */ -#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */ - -#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */ -#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */ - -#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */ -#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */ -#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */ -#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ -#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ - -#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */ -#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */ -#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */ -#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */ -#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */ - -#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */ -#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */ -#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */ -#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */ -#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */ - -#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */ -#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */ -#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */ -#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */ -#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */ - -#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */ -#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */ -#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */ -#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */ - -#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */ -#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */ -#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */ - -#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */ -#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */ -#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */ -#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */ -#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */ - -#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE) -#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS) - -#ifndef __ASSEMBLY__ -# define __PCM990_CTRL_REG(x) \ - (*((volatile unsigned char *)PCM990_CTRL_P2V(x))) -#else -# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x) -#endif - -#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) -#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) -#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0) -#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1) -#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2) -#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) -#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4) -#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) -#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) -#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) -#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8) -#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9) -#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10) -#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11) - - -/* - * IDE - */ -#define PCM990_IDE_IRQ_GPIO 13 -#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) -#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ -#define PCM990_IDE_PLD_BASE 0xee000000 -#define PCM990_IDE_PLD_SIZE (1*1024*1024) - -/* visible CPLD (U6) registers */ -#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */ -#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */ -#define PCM990_IDE_STBY 0x0008 /* R System StandBy */ - -#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */ -#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */ -#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */ -#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */ - -#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */ -#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */ -#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */ -#define PCM990_IDE_RDY 0x0008 /* RDY */ - -#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */ -#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */ -#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */ -#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */ - -#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */ -#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */ -#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */ -#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */ - -#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE) -#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS) - -#ifndef __ASSEMBLY__ -# define __PCM990_IDE_PLD_REG(x) \ - (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x))) -#else -# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x) -#endif - -#define PCM990_IDE0 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0) -#define PCM990_IDE1 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1) -#define PCM990_IDE2 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2) -#define PCM990_IDE3 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3) -#define PCM990_IDE4 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4) - -/* - * Compact Flash - */ -#define PCM990_CF_IRQ_GPIO 11 -#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) -#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -#define PCM990_CF_CD_GPIO 12 -#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) -#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING - -#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ -#define PCM990_CF_PLD_BASE 0xef000000 -#define PCM990_CF_PLD_SIZE (1*1024*1024) -#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE) -#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS) - -/* visible CPLD (U6) registers */ -#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */ -#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */ -#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */ -#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */ -#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */ - -#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */ -#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */ -#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */ - -#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */ -#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */ -#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */ -#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */ - -#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */ -#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */ -#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */ -#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */ -#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */ - -#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */ -#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */ -#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */ -#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */ -#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */ - -#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */ -#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */ -#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */ -#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */ -#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */ - -#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */ -#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ -#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ - -#ifndef __ASSEMBLY__ -# define __PCM990_CF_PLD_REG(x) \ - (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x))) -#else -# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x) -#endif - -#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0) -#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1) -#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2) -#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3) -#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4) -#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5) -#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6) - -/* - * Wolfson AC97 Touch - */ -#define PCM990_AC97_IRQ_GPIO 10 -#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) -#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -/* - * MMC phyCORE - */ -#define PCM990_MMC0_IRQ_GPIO 9 -#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) -#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING - -/* - * USB phyCore - */ -#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN) -#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT) diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h deleted file mode 100644 index 261e5bc958d..00000000000 --- a/include/asm-arm/arch-pxa/pm.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -struct pxa_cpu_pm_fns { - int save_count; - void (*save)(unsigned long *); - void (*restore)(unsigned long *); - int (*valid)(suspend_state_t state); - void (*enter)(suspend_state_t state); -}; - -extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; - -/* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int); -extern void pxa27x_cpu_suspend(unsigned int); -extern void pxa_cpu_resume(void); - -extern int pxa_pm_enter(suspend_state_t state); diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h deleted file mode 100644 index 4d6a4031576..00000000000 --- a/include/asm-arm/arch-pxa/poodle.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/poodle.h - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Based on: - * linux/include/asm-arm/arch-sa1100/collie.h - * - * ChangeLog: - * 04-06-2001 Lineo Japan, Inc. - * 04-16-2001 SHARP Corporation - * Update to 2.6 John Lenz - */ -#ifndef __ASM_ARCH_POODLE_H -#define __ASM_ARCH_POODLE_H 1 - -/* - * GPIOs - */ -/* PXA GPIOs */ -#define POODLE_GPIO_ON_KEY (0) -#define POODLE_GPIO_AC_IN (1) -#define POODLE_GPIO_CO 16 -#define POODLE_GPIO_TP_INT (5) -#define POODLE_GPIO_WAKEUP (11) /* change battery */ -#define POODLE_GPIO_GA_INT (10) -#define POODLE_GPIO_IR_ON (22) -#define POODLE_GPIO_HP_IN (4) -#define POODLE_GPIO_CF_IRQ (17) -#define POODLE_GPIO_CF_CD (14) -#define POODLE_GPIO_CF_STSCHG (14) -#define POODLE_GPIO_SD_PWR (33) -#define POODLE_GPIO_SD_PWR1 (3) -#define POODLE_GPIO_nSD_CLK (6) -#define POODLE_GPIO_nSD_WP (7) -#define POODLE_GPIO_nSD_INT (8) -#define POODLE_GPIO_nSD_DETECT (9) -#define POODLE_GPIO_MAIN_BAT_LOW (13) -#define POODLE_GPIO_BAT_COVER (13) -#define POODLE_GPIO_USB_PULLUP (20) -#define POODLE_GPIO_ADC_TEMP_ON (21) -#define POODLE_GPIO_BYPASS_ON (36) -#define POODLE_GPIO_CHRG_ON (38) -#define POODLE_GPIO_CHRG_FULL (16) -#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ - -/* PXA GPIOs */ -#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) -#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4) -#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16) -#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11) -#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10) -#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8) -#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13) - -/* SCOOP GPIOs */ -#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 -#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13 -#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18 -#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20 -#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21 -#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22 - -#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) -#define POODLE_SCOOP_IO_OUT ( 0 ) - -extern struct platform_device poodle_locomo_device; - -#endif /* __ASM_ARCH_POODLE_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h deleted file mode 100644 index dce9308626b..00000000000 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ /dev/null @@ -1,1070 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxa-regs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PXA_REGS_H -#define __PXA_REGS_H - - -/* - * PXA Chip selects - */ - -#define PXA_CS0_PHYS 0x00000000 -#define PXA_CS1_PHYS 0x04000000 -#define PXA_CS2_PHYS 0x08000000 -#define PXA_CS3_PHYS 0x0C000000 -#define PXA_CS4_PHYS 0x10000000 -#define PXA_CS5_PHYS 0x14000000 - - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ - -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ - - - -/* - * DMA Controller - */ - -#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ -#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ -#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ -#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ -#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ -#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ -#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ -#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ -#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ -#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ -#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ -#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ -#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ -#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ -#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ -#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ - -#define DCSR(x) __REG2(0x40000000, (x) << 2) - -#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#ifdef CONFIG_PXA27x -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ -#endif -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ - -#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ -#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ - -#define DRCMR(n) (*(((n) < 64) ? \ - &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ - &__REG2(0x40001100, ((n) & 0x3f) << 2))) - -#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ -#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ -#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ -#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ -#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ -#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ -#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ -#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ -#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ -#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ -#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ -#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ -#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ -#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ -#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ -#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ -#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ -#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ -#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ -#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ -#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ -#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ -#define DRCMR23 __REG(0x4000015c) /* Reserved */ -#define DRCMR24 __REG(0x40000160) /* Reserved */ -#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ -#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ -#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ -#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 __REG(0x40000174) /* Reserved */ -#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ -#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ -#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ -#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 __REG(0x40000188) /* Reserved */ -#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ -#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ -#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ -#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 __REG(0x4000019C) /* Reserved */ -#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ -#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ -#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ -#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ -#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ - -#define DRCMRRXSADR DRCMR2 -#define DRCMRTXSADR DRCMR3 -#define DRCMRRXBTRBR DRCMR4 -#define DRCMRTXBTTHR DRCMR5 -#define DRCMRRXFFRBR DRCMR6 -#define DRCMRTXFFTHR DRCMR7 -#define DRCMRRXMCDR DRCMR8 -#define DRCMRRXMODR DRCMR9 -#define DRCMRTXMODR DRCMR10 -#define DRCMRRXPCDR DRCMR11 -#define DRCMRTXPCDR DRCMR12 -#define DRCMRRXSSDR DRCMR13 -#define DRCMRTXSSDR DRCMR14 -#define DRCMRRXSS2DR DRCMR15 -#define DRCMRTXSS2DR DRCMR16 -#define DRCMRRXICDR DRCMR17 -#define DRCMRTXICDR DRCMR18 -#define DRCMRRXSTRBR DRCMR19 -#define DRCMRTXSTTHR DRCMR20 -#define DRCMRRXMMC DRCMR21 -#define DRCMRTXMMC DRCMR22 -#define DRCMRRXSS3DR DRCMR66 -#define DRCMRTXSS3DR DRCMR67 -#define DRCMRUDC(x) DRCMR((x) + 24) - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ - -#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ -#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ -#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ -#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ -#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ -#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ -#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ -#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ -#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ -#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ -#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ -#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ -#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ -#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ -#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ -#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ -#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ -#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ -#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ -#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ -#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ -#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ -#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ -#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ -#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ -#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ -#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ -#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ -#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ -#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ -#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ -#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ -#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ -#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ -#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ -#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ -#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ -#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ -#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ -#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ -#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ -#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ -#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ -#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ -#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ -#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ -#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ -#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ -#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ -#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ -#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ -#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ -#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ -#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ -#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ -#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ -#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ -#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ -#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ -#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ -#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ -#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ -#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ -#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ - -#define DDADR(x) __REG2(0x40000200, (x) << 4) -#define DSADR(x) __REG2(0x40000204, (x) << 4) -#define DTADR(x) __REG2(0x40000208, (x) << 4) -#define DCMD(x) __REG2(0x4000020c, (x) << 4) - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ -#define DDADR_STOP (1 << 0) /* Stop (read / write) */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - - -/* - * UARTs - */ - -/* Full Function UART (FFUART) */ -#define FFUART FFRBR -#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ -#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ -#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ -#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ -#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ -#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ -#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ -#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ -#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ -#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ -#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ -#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Bluetooth UART (BTUART) */ -#define BTUART BTRBR -#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ -#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ -#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ -#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ -#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ -#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ -#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ -#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ -#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ -#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ -#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ -#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Standard UART (STUART) */ -#define STUART STRBR -#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ -#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ -#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ -#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ -#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ -#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ -#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ -#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ -#define STMSR __REG(0x40700018) /* Reserved */ -#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ -#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ -#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Hardware UART (HWUART) */ -#define HWUART HWRBR -#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ -#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ -#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ -#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ -#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ -#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ -#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ -#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ -#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ -#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ -#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ -#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ -#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ -#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ -#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -#define IER_DMAE (1 << 7) /* DMA Requests Enable */ -#define IER_UUE (1 << 6) /* UART Unit Enable */ -#define IER_NRZE (1 << 5) /* NRZ coding Enable */ -#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ -#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ -#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ -#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ -#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ - -#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ -#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ -#define IIR_TOD (1 << 3) /* Time Out Detected */ -#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ -#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ -#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ - -#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ -#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ -#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ -#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ -#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ -#define FCR_ITL_1 (0) -#define FCR_ITL_8 (FCR_ITL1) -#define FCR_ITL_16 (FCR_ITL2) -#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) - -#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ -#define LCR_SB (1 << 6) /* Set Break */ -#define LCR_STKYP (1 << 5) /* Sticky Parity */ -#define LCR_EPS (1 << 4) /* Even Parity Select */ -#define LCR_PEN (1 << 3) /* Parity Enable */ -#define LCR_STB (1 << 2) /* Stop Bit */ -#define LCR_WLS1 (1 << 1) /* Word Length Select */ -#define LCR_WLS0 (1 << 0) /* Word Length Select */ - -#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ -#define LSR_TEMT (1 << 6) /* Transmitter Empty */ -#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ -#define LSR_BI (1 << 4) /* Break Interrupt */ -#define LSR_FE (1 << 3) /* Framing Error */ -#define LSR_PE (1 << 2) /* Parity Error */ -#define LSR_OE (1 << 1) /* Overrun Error */ -#define LSR_DR (1 << 0) /* Data Ready */ - -#define MCR_LOOP (1 << 4) -#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ -#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ -#define MCR_RTS (1 << 1) /* Request to Send */ -#define MCR_DTR (1 << 0) /* Data Terminal Ready */ - -#define MSR_DCD (1 << 7) /* Data Carrier Detect */ -#define MSR_RI (1 << 6) /* Ring Indicator */ -#define MSR_DSR (1 << 5) /* Data Set Ready */ -#define MSR_CTS (1 << 4) /* Clear To Send */ -#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ -#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ -#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ - -/* - * IrSR (Infrared Selection Register) - */ -#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ -#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ -#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ -#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ -#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ - - -/* - * I2C registers - */ - -#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ -#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ -#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ -#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ -#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ - -#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ -#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ -#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ - -#define ICR_START (1 << 0) /* start bit */ -#define ICR_STOP (1 << 1) /* stop bit */ -#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ -#define ICR_TB (1 << 3) /* transfer byte bit */ -#define ICR_MA (1 << 4) /* master abort */ -#define ICR_SCLE (1 << 5) /* master clock enable */ -#define ICR_IUE (1 << 6) /* unit enable */ -#define ICR_GCD (1 << 7) /* general call disable */ -#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ -#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ -#define ICR_BEIE (1 << 10) /* enable bus error ints */ -#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ -#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ -#define ICR_SADIE (1 << 13) /* slave address detected int enable */ -#define ICR_UR (1 << 14) /* unit reset */ - -#define ISR_RWM (1 << 0) /* read/write mode */ -#define ISR_ACKNAK (1 << 1) /* ack/nak status */ -#define ISR_UB (1 << 2) /* unit busy */ -#define ISR_IBB (1 << 3) /* bus busy */ -#define ISR_SSD (1 << 4) /* slave stop detected */ -#define ISR_ALD (1 << 5) /* arbitration loss detected */ -#define ISR_ITE (1 << 6) /* tx buffer empty */ -#define ISR_IRF (1 << 7) /* rx buffer full */ -#define ISR_GCAD (1 << 8) /* general call address detected */ -#define ISR_SAD (1 << 9) /* slave address detected */ -#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ - - -/* - * Serial Audio Controller - */ - -#define SACR0 __REG(0x40400000) /* Global Control Register */ -#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ -#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ -#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ -#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ -#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ - -#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ -#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ -#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ -#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ -#define SACR0_ENB (1 << 0) /* Enable I2S Link */ -#define SACR1_ENLBF (1 << 5) /* Enable Loopback */ -#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ -#define SACR1_DREC (1 << 3) /* Disable Recording Function */ -#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ - -#define SASR0_I2SOFF (1 << 7) /* Controller Status */ -#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ -#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ -#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ -#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ -#define SASR0_BSY (1 << 2) /* I2S Busy */ -#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ -#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ - -#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ -#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ - -#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ -#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ -#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ -#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ - -/* - * AC97 Controller registers - */ - -#define POCR __REG(0x40500000) /* PCM Out Control Register */ -#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define PICR __REG(0x40500004) /* PCM In Control Register */ -#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MCCR __REG(0x40500008) /* Mic In Control Register */ -#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define GCR __REG(0x4050000C) /* Global Control Register */ -#ifdef CONFIG_PXA3xx -#define GCR_CLKBPB (1 << 31) /* Internal clock enable */ -#endif -#define GCR_nDMAEN (1 << 24) /* non DMA Enable */ -#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ -#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ -#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ -#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ -#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ -#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ -#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ -#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ -#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ -#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ - -#define POSR __REG(0x40500010) /* PCM Out Status Register */ -#define POSR_FIFOE (1 << 4) /* FIFO error */ -#define POSR_FSR (1 << 2) /* FIFO Service Request */ - -#define PISR __REG(0x40500014) /* PCM In Status Register */ -#define PISR_FIFOE (1 << 4) /* FIFO error */ -#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define PISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MCSR __REG(0x40500018) /* Mic In Status Register */ -#define MCSR_FIFOE (1 << 4) /* FIFO error */ -#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MCSR_FSR (1 << 2) /* FIFO Service Request */ - -#define GSR __REG(0x4050001C) /* Global Status Register */ -#define GSR_CDONE (1 << 19) /* Command Done */ -#define GSR_SDONE (1 << 18) /* Status Done */ -#define GSR_RDCS (1 << 15) /* Read Completion Status */ -#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ -#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ -#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ -#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ -#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ -#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ -#define GSR_PCR (1 << 8) /* Primary Codec Ready */ -#define GSR_MCINT (1 << 7) /* Mic In Interrupt */ -#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ -#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ -#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ -#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ -#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ -#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ - -#define CAR __REG(0x40500020) /* CODEC Access Register */ -#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ - -#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ -#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ - -#define MOCR __REG(0x40500100) /* Modem Out Control Register */ -#define MOCR_FEIE (1 << 3) /* FIFO Error */ -#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MICR __REG(0x40500108) /* Modem In Control Register */ -#define MICR_FEIE (1 << 3) /* FIFO Error */ -#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MOSR __REG(0x40500110) /* Modem Out Status Register */ -#define MOSR_FIFOE (1 << 4) /* FIFO error */ -#define MOSR_FSR (1 << 2) /* FIFO Service Request */ - -#define MISR __REG(0x40500118) /* Modem In Status Register */ -#define MISR_FIFOE (1 << 4) /* FIFO error */ -#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ - -#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ -#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ -#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ -#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ - - -/* - * Fast Infrared Communication Port - */ - -#define FICP __REG(0x40800000) /* Start of FICP area */ -#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ -#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ -#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ -#define ICDR __REG(0x4080000c) /* ICP Data Register */ -#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ -#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ - -#define ICCR0_AME (1 << 7) /* Address match enable */ -#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ -#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ -#define ICCR0_RXE (1 << 4) /* Receive enable */ -#define ICCR0_TXE (1 << 3) /* Transmit enable */ -#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ -#define ICCR0_LBM (1 << 1) /* Loopback mode */ -#define ICCR0_ITR (1 << 0) /* IrDA transmission */ - -#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ -#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ -#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ -#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ -#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ -#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ - -#ifdef CONFIG_PXA27x -#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ -#endif -#define ICSR0_FRE (1 << 5) /* Framing error */ -#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ -#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ -#define ICSR0_RAB (1 << 2) /* Receiver abort */ -#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ -#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ - -#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ -#define ICSR1_CRE (1 << 5) /* CRC error */ -#define ICSR1_EOF (1 << 4) /* End of frame */ -#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ -#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ -#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ -#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ - - -/* - * Real Time Clock - */ - -#define RCNR __REG(0x40900000) /* RTC Count Register */ -#define RTAR __REG(0x40900004) /* RTC Alarm Register */ -#define RTSR __REG(0x40900008) /* RTC Status Register */ -#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ - -#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - - -/* - * OS Timer & Match Registers - */ - -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ - -#define OSSR_M3 (1 << 3) /* Match status channel 3 */ -#define OSSR_M2 (1 << 2) /* Match status channel 2 */ -#define OSSR_M1 (1 << 1) /* Match status channel 1 */ -#define OSSR_M0 (1 << 0) /* Match status channel 0 */ - -#define OWER_WME (1 << 0) /* Watchdog Match Enable */ - -#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ -#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ -#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ -#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - - -/* - * Pulse Width Modulator - */ - -#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ -#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ -#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ - -#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ -#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ -#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ - - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -/* - * General Purpose I/O - */ - -#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) -#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) -#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) -#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - -#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ -#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ -#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ - -#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ -#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ -#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ - -#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ -#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ -#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ - -#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ -#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ -#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ - -#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ -#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ -#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ - -#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ -#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ - -#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ -#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ -#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ - -#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ -#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ -#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ -#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ -#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ - -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - -/* Interrupt Controller */ - -#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) -#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) -#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) -#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) -#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) -#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) -#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) -#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ - ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) -#else - -#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#endif - -/* - * Power Manager - see pxa2xx-regs.h - */ - -/* - * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h - */ - -/* - * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h - */ - -/* - * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h - */ - -#ifdef CONFIG_PXA27x - -/* Camera Interface */ -#define CICR0 __REG(0x50000000) -#define CICR1 __REG(0x50000004) -#define CICR2 __REG(0x50000008) -#define CICR3 __REG(0x5000000C) -#define CICR4 __REG(0x50000010) -#define CISR __REG(0x50000014) -#define CIFR __REG(0x50000018) -#define CITOR __REG(0x5000001C) -#define CIBR0 __REG(0x50000028) -#define CIBR1 __REG(0x50000030) -#define CIBR2 __REG(0x50000038) - -#define CICR0_DMAEN (1 << 31) /* DMA request enable */ -#define CICR0_PAR_EN (1 << 30) /* Parity enable */ -#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ -#define CICR0_ENB (1 << 28) /* Camera interface enable */ -#define CICR0_DIS (1 << 27) /* Camera interface disable */ -#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ -#define CICR0_TOM (1 << 9) /* Time-out mask */ -#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ -#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ -#define CICR0_EOLM (1 << 6) /* End-of-line mask */ -#define CICR0_PERRM (1 << 5) /* Parity-error mask */ -#define CICR0_QDM (1 << 4) /* Quick-disable mask */ -#define CICR0_CDM (1 << 3) /* Disable-done mask */ -#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ -#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ -#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ - -#define CICR1_TBIT (1 << 31) /* Transparency bit */ -#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ -#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ -#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ -#define CICR1_RGB_F (1 << 11) /* RGB format */ -#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ -#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ -#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ -#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ -#define CICR1_DW (0x7 << 0) /* Data width mask */ - -#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock - wait count mask */ -#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock - wait count mask */ -#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ -#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR2_FSW (0x7 << 0) /* Frame stabilization - wait count mask */ - -#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock - wait count mask */ -#define CICR3_EFW (0xff << 16) /* End-of-frame line clock - wait count mask */ -#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ -#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ - -#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ -#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ -#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ -#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ -#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ -#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ -#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ -#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ - -#define CISR_FTO (1 << 15) /* FIFO time-out */ -#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ -#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ -#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ -#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ -#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ -#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ -#define CISR_EOL (1 << 8) /* End of line */ -#define CISR_PAR_ERR (1 << 7) /* Parity error */ -#define CISR_CQD (1 << 6) /* Camera interface quick disable */ -#define CISR_CDD (1 << 5) /* Camera interface disable done */ -#define CISR_SOF (1 << 4) /* Start of frame */ -#define CISR_EOF (1 << 3) /* End of frame */ -#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ -#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ -#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ - -#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ -#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ -#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ -#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ -#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ -#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ -#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ -#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ - -#define SRAM_SIZE 0x40000 /* 4x64K */ - -#define SRAM_MEM_PHYS 0x5C000000 - -#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ -#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ - -#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ -#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ -#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ -#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ - -#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ -#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ -#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ -#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ - -#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ -#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ -#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ -#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ - -#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ -#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ -#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ -#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ - -#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ -#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ -#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ -#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ - -#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ - -#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ -#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ -#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ - -#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ -#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ -#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ - -#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ -#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ -#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ - -#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ -#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ -#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ - -#endif - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -/* - * UHC: USB Host Controller (OHCI-like) register definitions - */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ - -#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ -#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ - -#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ - -#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ -#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ -#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ -#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ -#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ -#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ -#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ -#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ -#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ -#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ - -#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ -#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ -#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ -#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ -#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ -#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ -#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ -#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ -#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ -#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ -#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ -#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ - -#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ -#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ -#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ -#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ -#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ -#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort - Interrupt Enable*/ -#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ -#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ - -#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ - -#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ - -/* PWRMODE register M field values */ - -#define PWRMODE_IDLE 0x1 -#define PWRMODE_STANDBY 0x2 -#define PWRMODE_SLEEP 0x3 -#define PWRMODE_DEEPSLEEP 0x7 - -#endif diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h deleted file mode 100644 index 1b80a4805a6..00000000000 --- a/include/asm-arm/arch-pxa/pxa25x-udc.h +++ /dev/null @@ -1,163 +0,0 @@ -#ifndef _ASM_ARCH_PXA25X_UDC_H -#define _ASM_ARCH_PXA25X_UDC_H - -#ifdef _ASM_ARCH_PXA27X_UDC_H -#error "You can't include both PXA25x and PXA27x UDC support" -#endif - -#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ -#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#endif diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h deleted file mode 100644 index ab1443f8bd8..00000000000 --- a/include/asm-arm/arch-pxa/pxa27x-udc.h +++ /dev/null @@ -1,257 +0,0 @@ -#ifndef _ASM_ARCH_PXA27X_UDC_H -#define _ASM_ARCH_PXA27X_UDC_H - -#ifdef _ASM_ARCH_PXA25X_UDC_H -#error You cannot include both PXA25x and PXA27x UDC support -#endif - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ -#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation - Protocol Port Support */ -#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol - Support */ -#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol - Enable */ -#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ -#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ -#define UDCCR_ACN_S 11 -#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ -#define UDCCR_AIN_S 8 -#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface - Setting Number */ -#define UDCCR_AAISN_S 5 -#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active - Configuration */ -#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration - Error */ -#define UDCCR_UDR (1 << 2) /* UDC Resume */ -#define UDCCR_UDA (1 << 1) /* UDC Active */ -#define UDCCR_UDE (1 << 0) /* UDC Enable */ - -#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ -#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ -#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ -#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ -#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ -#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ -#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ - -#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ -#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ -#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ -#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ -#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ -#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ -#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ - -#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ -#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ -#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt - Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt - Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising - Edge Interrupt Enable */ -#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling - Edge Interrupt Enable */ -#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge - Interrupt Enable */ - -#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ -#define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */ - -#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ -#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ -#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ -#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ -#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ -#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ -#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ -#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ -#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ -#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ -#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ -#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ -#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ -#define UP2OCR_SEOS(x) ((x & 7) << 24) /* Single-Ended Output Select */ - -#define UDCCSN(x) __REG2(0x40600100, (x) << 2) -#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ -#define UDCCSR0_SA (1 << 7) /* Setup Active */ -#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ -#define UDCCSR0_FST (1 << 5) /* Force Stall */ -#define UDCCSR0_SST (1 << 4) /* Sent Stall */ -#define UDCCSR0_DME (1 << 3) /* DMA Enable */ -#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ -#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ -#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ - -#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ -#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ -#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ -#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ -#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ -#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ -#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ -#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ -#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ -#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ -#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ -#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ -#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ -#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ -#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ -#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ -#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ -#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ -#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ -#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ -#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ -#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ -#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ - -#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ -#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ -#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ -#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ -#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ -#define UDCCSR_FST (1 << 5) /* Force STALL */ -#define UDCCSR_SST (1 << 4) /* Sent STALL */ -#define UDCCSR_DME (1 << 3) /* DMA Enable */ -#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ -#define UDCCSR_PC (1 << 1) /* Packet Complete */ -#define UDCCSR_FS (1 << 0) /* FIFO needs service */ - -#define UDCBCN(x) __REG2(0x40600200, (x)<<2) -#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ -#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ -#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ -#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ -#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ -#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ -#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ -#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ -#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ -#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ -#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ -#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ -#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ -#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ -#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ -#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ -#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ -#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ -#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ -#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ -#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ -#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ -#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ -#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ - -#define UDCDN(x) __REG2(0x40600300, (x)<<2) -#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) -#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) -#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ -#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ -#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ -#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ -#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ -#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ -#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ -#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ -#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ -#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ -#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ -#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ -#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ -#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ -#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ -#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ -#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ -#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ -#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ -#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ -#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ -#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ -#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ -#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ - -#define UDCCN(x) __REG2(0x40600400, (x)<<2) -#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ -#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ -#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ -#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ -#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ -#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ -#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ -#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ -#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ -#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ -#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ -#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ -#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ -#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ -#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ -#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ -#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ -#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ -#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ -#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ -#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ -#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ -#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ - -#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ -#define UDCCONR_CN_S (25) -#define UDCCONR_IN (0x07 << 22) /* Interface Number */ -#define UDCCONR_IN_S (22) -#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ -#define UDCCONR_AISN_S (19) -#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ -#define UDCCONR_EN_S (15) -#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ -#define UDCCONR_ET_S (13) -#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ -#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ -#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ -#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ -#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ -#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ -#define UDCCONR_MPS_S (2) -#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ -#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ - - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDC_FNR_MASK (0x7ff) - -#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) -#define UDC_BCR_MASK (0x3ff) - -#endif diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h deleted file mode 100644 index d5a48a96dea..00000000000 --- a/include/asm-arm/arch-pxa/pxa27x_keypad.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef __ASM_ARCH_PXA27x_KEYPAD_H -#define __ASM_ARCH_PXA27x_KEYPAD_H - -#include - -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) - -/* pxa3xx keypad platform specific parameters - * - * NOTE: - * 1. direct_key_num indicates the number of keys in the direct keypad - * _plus_ the number of rotary-encoder sensor inputs, this can be - * left as 0 if only rotary encoders are enabled, the driver will - * automatically calculate this - * - * 2. direct_key_map is the key code map for the direct keys, if rotary - * encoder(s) are enabled, direct key 0/1(2/3) will be ignored - * - * 3. rotary can be either interpreted as a relative input event (e.g. - * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) - * - * 4. matrix key and direct key will use the same debounce_interval by - * default, which should be sufficient in most cases - */ -struct pxa27x_keypad_platform_data { - - /* code map for the matrix keys */ - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - unsigned int *matrix_key_map; - int matrix_key_map_size; - - /* direct keys */ - int direct_key_num; - unsigned int direct_key_map[8]; - - /* rotary encoders 0 */ - int enable_rotary0; - int rotary0_rel_code; - int rotary0_up_key; - int rotary0_down_key; - - /* rotary encoders 1 */ - int enable_rotary1; - int rotary1_rel_code; - int rotary1_up_key; - int rotary1_down_key; - - /* key debounce interval */ - unsigned int debounce_interval; -}; - -#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) - -extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); - -#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h deleted file mode 100644 index 6ef1dd09970..00000000000 --- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h +++ /dev/null @@ -1,368 +0,0 @@ -#ifndef __ASM_ARCH_PXA2XX_GPIO_H -#define __ASM_ARCH_PXA2XX_GPIO_H - -#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO24_CIF_FV 24 /* Camera frame start signal */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO25_CIF_LV 25 /* Camera line start signal */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO43_CIF_FV 43 /* Camera frame start signal */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO44_CIF_LV 44 /* Camera line start signal */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO84_CIF_FV 84 /* Camera frame start signal */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO85_CIF_LV 85 /* Camera line start signal */ -#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ -#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ -#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ -#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ -#define GPIO96_FFRXD 96 /* FFUART recieve */ -#define GPIO98_FFRTS 98 /* FFUART request to send */ -#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ -#define GPIO99_FFTXD 99 /* FFUART transmit data */ -#define GPIO100_FFCTS 100 /* FFUART Clear to send */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ -#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ -#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ -#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ -#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ -#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ -#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ -#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ -#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) -#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) -#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) -#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) -#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) -#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) -#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) -#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) -#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) -#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) -#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) -#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) -#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) -#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) -#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) -#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) -#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) -#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) -#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) -#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) -#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) -#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) -#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) -#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) -#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) -#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) -#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) -#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) -#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - -#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h deleted file mode 100644 index 73e0a329cf7..00000000000 --- a/include/asm-arm/arch-pxa/pxa2xx-regs.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxa2xx-regs.h - * - * Taken from pxa-regs.h by Russell King - * - * Author: Nicolas Pitre - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PXA2XX_REGS_H -#define __PXA2XX_REGS_H - -/* - * Memory controller - */ - -#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ -#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ -#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ -#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ -#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ -#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ -#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ -#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ -#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ -#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ -#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ -#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ - -/* - * More handy macros for PCMCIA - * - * Arg is socket number - */ -#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ -#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ -#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ - -/* MECR register defines */ -#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ -#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ - -#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ -#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ -#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ -#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ -#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ -#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ -#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ -#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ -#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ -#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ -#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ -#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ -#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ -#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - - -#ifdef CONFIG_PXA27x - -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - -#endif - - -/* - * Power Manager - */ - -#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ -#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ -#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ -#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ -#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ -#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ -#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ -#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ -#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ -#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ -#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ -#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ -#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ - -#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ -#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ -#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ -#define PCMD(x) __REG2(0x40F00080, (x)<<2) -#define PCMD0 __REG(0x40F00080 + 0 * 4) -#define PCMD1 __REG(0x40F00080 + 1 * 4) -#define PCMD2 __REG(0x40F00080 + 2 * 4) -#define PCMD3 __REG(0x40F00080 + 3 * 4) -#define PCMD4 __REG(0x40F00080 + 4 * 4) -#define PCMD5 __REG(0x40F00080 + 5 * 4) -#define PCMD6 __REG(0x40F00080 + 6 * 4) -#define PCMD7 __REG(0x40F00080 + 7 * 4) -#define PCMD8 __REG(0x40F00080 + 8 * 4) -#define PCMD9 __REG(0x40F00080 + 9 * 4) -#define PCMD10 __REG(0x40F00080 + 10 * 4) -#define PCMD11 __REG(0x40F00080 + 11 * 4) -#define PCMD12 __REG(0x40F00080 + 12 * 4) -#define PCMD13 __REG(0x40F00080 + 13 * 4) -#define PCMD14 __REG(0x40F00080 + 14 * 4) -#define PCMD15 __REG(0x40F00080 + 15 * 4) -#define PCMD16 __REG(0x40F00080 + 16 * 4) -#define PCMD17 __REG(0x40F00080 + 17 * 4) -#define PCMD18 __REG(0x40F00080 + 18 * 4) -#define PCMD19 __REG(0x40F00080 + 19 * 4) -#define PCMD20 __REG(0x40F00080 + 20 * 4) -#define PCMD21 __REG(0x40F00080 + 21 * 4) -#define PCMD22 __REG(0x40F00080 + 22 * 4) -#define PCMD23 __REG(0x40F00080 + 23 * 4) -#define PCMD24 __REG(0x40F00080 + 24 * 4) -#define PCMD25 __REG(0x40F00080 + 25 * 4) -#define PCMD26 __REG(0x40F00080 + 26 * 4) -#define PCMD27 __REG(0x40F00080 + 27 * 4) -#define PCMD28 __REG(0x40F00080 + 28 * 4) -#define PCMD29 __REG(0x40F00080 + 29 * 4) -#define PCMD30 __REG(0x40F00080 + 30 * 4) -#define PCMD31 __REG(0x40F00080 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) -/* FIXME: PCMD_SQC need be checked. */ -#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, - bit 9 should be 0 all day. */ -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -#define PCFR_PI2C_EN (0x1 << 6) - -#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ -#define PSSR_RDH (1 << 5) /* Read Disable Hold */ -#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ -#define PSSR_STS (1 << 3) /* Standby Mode Status */ -#define PSSR_VFS (1 << 2) /* VDD Fault Status */ -#define PSSR_BFS (1 << 1) /* Battery Fault Status */ -#define PSSR_SSS (1 << 0) /* Software Sleep Status */ - -#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ - -#define PCFR_RO (1 << 15) /* RDH Override */ -#define PCFR_PO (1 << 14) /* PH Override */ -#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ -#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ -#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ -#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ -#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ -#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ -#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ -#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ -#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ -#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ - -#define RCSR_GPR (1 << 3) /* GPIO Reset */ -#define RCSR_SMR (1 << 2) /* Sleep Mode */ -#define RCSR_WDR (1 << 1) /* Watchdog Reset */ -#define RCSR_HWR (1 << 0) /* Hardware Reset */ - -#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ -#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ -#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ -#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ -#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ -#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ -#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ -#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ -#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ -#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ -#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ -#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ -#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ -#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ -#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ -#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ -#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ -#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ - -/* - * PXA2xx specific Core clock definitions - */ -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ - -#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ - -#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ -#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ -#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ -#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ -#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ -#define CKEN_IM (20) /* Internal Memory Clock Enable */ -#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ -#define CKEN_USIM (18) /* USIM Unit Clock Enable */ -#define CKEN_MSL (17) /* MSL Unit Clock Enable */ -#define CKEN_LCD (16) /* LCD Unit Clock Enable */ -#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ -#define CKEN_I2C (14) /* I2C Unit Clock Enable */ -#define CKEN_FICP (13) /* FICP Unit Clock Enable */ -#define CKEN_MMC (12) /* MMC Unit Clock Enable */ -#define CKEN_USB (11) /* USB Unit Clock Enable */ -#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ -#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ -#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ -#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ -#define CKEN_I2S (8) /* I2S Unit Clock Enable */ -#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ -#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ -#define CKEN_STUART (5) /* STUART Unit Clock Enable */ -#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ -#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ -#define CKEN_SSP (3) /* SSP Unit Clock Enable */ -#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ -#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ -#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ -#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ - -#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ -#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ - -#endif diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h deleted file mode 100644 index 2206cb61a9f..00000000000 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef PXA2XX_SPI_H_ -#define PXA2XX_SPI_H_ - -#define PXA2XX_CS_ASSERT (0x01) -#define PXA2XX_CS_DEASSERT (0x02) - -/* device.platform_data for SSP controller devices */ -struct pxa2xx_spi_master { - u32 clock_enable; - u16 num_chipselect; - u8 enable_dma; -}; - -/* spi_board_info.controller_data for SPI slave devices, - * copied to spi_device.platform_data ... mostly for dma tuning - */ -struct pxa2xx_spi_chip { - u8 tx_threshold; - u8 rx_threshold; - u8 dma_burst_size; - u32 timeout; - u8 enable_loopback; - void (*cs_control)(u32 command); -}; - -extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); - -#endif /*PXA2XX_SPI_H_*/ diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h deleted file mode 100644 index fe9364c83a2..00000000000 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ /dev/null @@ -1,183 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h - * - * PXA3xx specific register definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_PXA3XX_REGS_H -#define __ASM_ARCH_PXA3XX_REGS_H - -/* - * Oscillator Configuration Register (OSCC) - */ -#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ - -#define OSCC_PEN (1 << 11) /* 13MHz POUT */ - - -/* - * Service Power Management Unit (MPMU) - */ -#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ -#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ -#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ -#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ -#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ -#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ -#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ -#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ -#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ -#define PCMD(x) __REG(0x40F50110 + ((x) << 2)) - -/* - * Slave Power Managment Unit - */ -#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ -#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ -#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ -#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ -#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ -#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ -#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ -#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ -#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ -#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ -#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ -#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ -#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ -#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ - -/* - * Application Subsystem Configuration bits. - */ -#define ASCR_RDH (1 << 31) -#define ASCR_D1S (1 << 2) -#define ASCR_D2S (1 << 1) -#define ASCR_D3S (1 << 0) - -/* - * Application Reset Status bits. - */ -#define ARSR_GPR (1 << 3) -#define ARSR_LPMR (1 << 2) -#define ARSR_WDT (1 << 1) -#define ARSR_HWR (1 << 0) - -/* - * Application Subsystem Wake-Up bits. - */ -#define ADXER_WRTC (1 << 31) /* RTC */ -#define ADXER_WOST (1 << 30) /* OS Timer */ -#define ADXER_WTSI (1 << 29) /* Touchscreen */ -#define ADXER_WUSBH (1 << 28) /* USB host */ -#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ -#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ -#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ -#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ -#define ADXER_WKP (1 << 21) /* Keypad */ -#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ -#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ -#define ADXER_WOTG (1 << 16) /* USBOTG input */ -#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ -#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ -#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ -#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ -#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ -#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ -#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ -#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ -#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ -#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ -#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ -#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ -#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ -#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ -#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ -#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ - -/* - * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. - */ -#define ADXR_L2 (1 << 8) -#define ADXR_R5 (1 << 5) -#define ADXR_R4 (1 << 4) -#define ADXR_R3 (1 << 3) -#define ADXR_R2 (1 << 2) -#define ADXR_R1 (1 << 1) -#define ADXR_R0 (1 << 0) - -/* - * Values for PWRMODE CP15 register - */ -#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ -#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ -#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ -#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ -#define PXA3xx_PM_S0D0C1 0x01 - -/* - * Application Subsystem Clock - */ -#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ -#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ -#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ -#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ -#define CKENB __REG(0x41340010) /* B Clock Enable Register */ -#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ - -/* - * Clock Enable Bit - */ -#define CKEN_LCD 1 /* < LCD Clock Enable */ -#define CKEN_USBH 2 /* < USB host clock enable */ -#define CKEN_CAMERA 3 /* < Camera interface clock enable */ -#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ -#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ -#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ -#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ -#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ -#define CKEN_BOOT 11 /* < Boot rom clock enable */ -#define CKEN_MMC1 12 /* < MMC1 Clock enable */ -#define CKEN_MMC2 13 /* < MMC2 clock enable */ -#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ -#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ -#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ -#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ -#define CKEN_TPM 19 /* < TPM clock enable */ -#define CKEN_UDC 20 /* < UDC clock enable */ -#define CKEN_BTUART 21 /* < BTUART clock enable */ -#define CKEN_FFUART 22 /* < FFUART clock enable */ -#define CKEN_STUART 23 /* < STUART clock enable */ -#define CKEN_AC97 24 /* < AC97 clock enable */ -#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ -#define CKEN_SSP1 26 /* < SSP1 clock enable */ -#define CKEN_SSP2 27 /* < SSP2 clock enable */ -#define CKEN_SSP3 28 /* < SSP3 clock enable */ -#define CKEN_SSP4 29 /* < SSP4 clock enable */ -#define CKEN_MSL0 30 /* < MSL0 clock enable */ -#define CKEN_PWM0 32 /* < PWM[0] clock enable */ -#define CKEN_PWM1 33 /* < PWM[1] clock enable */ -#define CKEN_I2C 36 /* < I2C clock enable */ -#define CKEN_INTC 38 /* < Interrupt controller clock enable */ -#define CKEN_GPIO 39 /* < GPIO clock enable */ -#define CKEN_1WIRE 40 /* < 1-wire clock enable */ -#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ -#define CKEN_MINI_IM 48 /* < Mini-IM */ -#define CKEN_MINI_LCD 49 /* < Mini LCD */ - -#if defined(CONFIG_CPU_PXA310) -#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ -#define CKEN_MVED 43 /* < MVED clock enable */ -#endif - -/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ -#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ -#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ - -#endif /* __ASM_ARCH_PXA3XX_REGS_H */ diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h deleted file mode 100644 index eb4b190b665..00000000000 --- a/include/asm-arm/arch-pxa/pxa3xx_nand.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_ARCH_PXA3XX_NAND_H -#define __ASM_ARCH_PXA3XX_NAND_H - -#include -#include - -struct pxa3xx_nand_platform_data { - - /* the data flash bus is shared between the Static Memory - * Controller and the Data Flash Controller, the arbiter - * controls the ownership of the bus - */ - int enable_arbiter; - - struct mtd_partition *parts; - unsigned int nr_parts; -}; - -extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); -#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h deleted file mode 100644 index daf018d0c60..00000000000 --- a/include/asm-arm/arch-pxa/pxafb.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxafb.h - * - * Support for the xscale frame buffer. - * - * Author: Jean-Frederic Clere - * Created: Sep 22, 2003 - * Copyright: jfclere@sinix.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -/* - * Supported LCD connections - * - * bits 0 - 3: for LCD panel type: - * - * STN - for passive matrix - * DSTN - for dual scan passive matrix - * TFT - for active matrix - * - * bits 4 - 9 : for bus width - * bits 10-17 : for AC Bias Pin Frequency - * bit 18 : for output enable polarity - * bit 19 : for pixel clock edge - */ -#define LCD_CONN_TYPE(_x) ((_x) & 0x0f) -#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) - -#define LCD_TYPE_UNKNOWN 0 -#define LCD_TYPE_MONO_STN 1 -#define LCD_TYPE_MONO_DSTN 2 -#define LCD_TYPE_COLOR_STN 3 -#define LCD_TYPE_COLOR_DSTN 4 -#define LCD_TYPE_COLOR_TFT 5 -#define LCD_TYPE_SMART_PANEL 6 -#define LCD_TYPE_MAX 7 - -#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) -#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) -#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) -#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) -#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) -#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) -#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) -#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) -#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) -#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) - -#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) -#define LCD_BIAS_ACTIVE_HIGH (0 << 17) -#define LCD_BIAS_ACTIVE_LOW (1 << 17) -#define LCD_PCLK_EDGE_RISE (0 << 18) -#define LCD_PCLK_EDGE_FALL (1 << 18) - -/* - * This structure describes the machine which we are running on. - * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine - * of linux/drivers/video/pxafb.c - */ -struct pxafb_mode_info { - u_long pixclock; - - u_short xres; - u_short yres; - - u_char bpp; - u_int cmap_greyscale:1, - depth:8, - unused:23; - - /* Parallel Mode Timing */ - u_char hsync_len; - u_char left_margin; - u_char right_margin; - - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; - - /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details - * Note: - * 1. all parameters in nanosecond (ns) - * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits - * in pxa27x and pxa3xx, initialize them to the same value or - * the larger one will be used - * 3. same to {rd,wr}_pulse_width - */ - unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ - unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ - unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ - unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ - unsigned cmd_inh_time; /* Command Inhibit time between two writes */ - unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ -}; - -struct pxafb_mach_info { - struct pxafb_mode_info *modes; - unsigned int num_modes; - - unsigned int lcd_conn; - - u_int fixed_modes:1, - cmap_inverse:1, - cmap_static:1, - unused:29; - - /* The following should be defined in LCCR0 - * LCCR0_Act or LCCR0_Pas Active or Passive - * LCCR0_Sngl or LCCR0_Dual Single/Dual panel - * LCCR0_Mono or LCCR0_Color Mono/Color - * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) - * LCCR0_DMADel(Tcpu) (optional) DMA request delay - * - * The following should not be defined in LCCR0: - * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM - * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB - */ - u_int lccr0; - /* The following should be defined in LCCR3 - * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity - * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type - * LCCR3_Acb(X) AB Bias pin frequency - * LCCR3_DPC (optional) Double Pixel Clock mode (untested) - * - * The following should not be defined in LCCR3 - * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp - */ - u_int lccr3; - /* The following should be defined in LCCR4 - * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 - * - * All other bits in LCCR4 should be left alone. - */ - u_int lccr4; - void (*pxafb_backlight_power)(int); - void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); - void (*smart_update)(struct fb_info *); -}; -void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); -void set_pxa_fb_parent(struct device *parent_dev); -unsigned long pxafb_get_hsync_time(struct device *dev); - -extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); -extern int pxafb_smart_flush(struct fb_info *info); diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h deleted file mode 100644 index 820a189684a..00000000000 --- a/include/asm-arm/arch-pxa/regs-lcd.h +++ /dev/null @@ -1,180 +0,0 @@ -#ifndef __ASM_ARCH_REGS_LCD_H -#define __ASM_ARCH_REGS_LCD_H - -#include - -/* - * LCD Controller Registers and Bits Definitions - */ -#define LCCR0 (0x000) /* LCD Controller Control Register 0 */ -#define LCCR1 (0x004) /* LCD Controller Control Register 1 */ -#define LCCR2 (0x008) /* LCD Controller Control Register 2 */ -#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */ -#define LCCR4 (0x010) /* LCD Controller Control Register 4 */ -#define LCCR5 (0x014) /* LCD Controller Control Register 5 */ -#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */ -#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR (0x038) /* LCD Controller Status Register */ -#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR (0x040) /* TMED RGB Seed Register */ -#define TMEDCR (0x044) /* TMED Control Register */ - -#define CMDCR (0x100) /* Command Control Register */ -#define PRSR (0x104) /* Panel Read Status Register */ - -#define LCCR3_1BPP (0 << 24) -#define LCCR3_2BPP (1 << 24) -#define LCCR3_4BPP (2 << 24) -#define LCCR3_8BPP (3 << 24) -#define LCCR3_16BPP (4 << 24) -#define LCCR3_18BPP (5 << 24) -#define LCCR3_18BPP_P (6 << 24) -#define LCCR3_19BPP (7 << 24) -#define LCCR3_19BPP_P (1 << 29) -#define LCCR3_24BPP ((1 << 29) | (1 << 24)) -#define LCCR3_25BPP ((1 << 29) | (2 << 24)) - -#define LCCR3_PDFOR_0 (0 << 30) -#define LCCR3_PDFOR_1 (1 << 30) -#define LCCR3_PDFOR_2 (2 << 30) -#define LCCR3_PDFOR_3 (3 << 30) - -#define LCCR4_PAL_FOR_0 (0 << 15) -#define LCCR4_PAL_FOR_1 (1 << 15) -#define LCCR4_PAL_FOR_2 (2 << 15) -#define LCCR4_PAL_FOR_MASK (3 << 15) - -#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */ -#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */ -#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */ -#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */ -#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */ -#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */ -#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */ -#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */ -#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */ - -#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ - -#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ -#define LCCR0_SFM (1 << 4) /* Start of frame mask */ -#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ -#define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */ -#define LCCR0_DIS (1 << 10) /* LCD Disable */ -#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ -#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ -#define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ -#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#define LCCR0_LCDT (1 << 22) /* LCD panel type */ -#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ -#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ -#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ -#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */ -#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ -#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW)) - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */ -#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ -#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ -#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW)) - -#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ -#define LCCR3_API_S 16 -#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ -#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ - -#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - -#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD))) - -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP))) - -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB))) - -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */ - -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */ - -#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */ -#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */ -#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */ -#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ -#define LCSR_RD_ST (1 << 11) /* read status */ -#define LCSR_CMD_INT (1 << 12) /* command interrupt */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -/* smartpanel related */ -#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */ -#define PRSR_A0 (1 << 8) /* Read Data Source */ -#define PRSR_ST_OK (1 << 9) /* Status OK */ -#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */ - -#define SMART_CMD_A0 (0x1 << 8) -#define SMART_CMD_READ_STATUS_REG (0x0 << 9) -#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_COMMAND (0x1 << 9) -#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0) -#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9) -#define SMART_CMD_NOOP (0x4 << 9) -#define SMART_CMD_INTERRUPT (0x5 << 9) - -#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff)) -#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff)) -#endif /* __ASM_ARCH_REGS_LCD_H */ diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h deleted file mode 100644 index 3c04cde2cf1..00000000000 --- a/include/asm-arm/arch-pxa/regs-ssp.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef __ASM_ARCH_REGS_SSP_H -#define __ASM_ARCH_REGS_SSP_H - -/* - * SSP Serial Port Registers - * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. - * PXA255, PXA26x and PXA27x have extra ports, registers and bits. - */ - -#define SSCR0 (0x00) /* SSP Control Register 0 */ -#define SSCR1 (0x04) /* SSP Control Register 1 */ -#define SSSR (0x08) /* SSP Status Register */ -#define SSITR (0x0C) /* SSP Interrupt Test Register */ -#define SSDR (0x10) /* SSP Data Write/Data Read Register */ - -#define SSTO (0x28) /* SSP Time Out Register */ -#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ -#define SSTSA (0x30) /* SSP Tx Timeslot Active */ -#define SSRSA (0x34) /* SSP Rx Timeslot Active */ -#define SSTSS (0x38) /* SSP Timeslot Status */ -#define SSACD (0x3C) /* SSP Audio Clock Divider */ - -#if defined(CONFIG_PXA3xx) -#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ -#endif - -/* Common PXA2xx bits first */ -#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ -#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ -#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ -#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ -#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ -#define SSCR0_National (0x2 << 4) /* National Microwire */ -#define SSCR0_ECS (1 << 6) /* External clock select */ -#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ - -#if defined(CONFIG_PXA25x) -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ - -#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#define SSCR0_EDSS (1 << 20) /* Extended data size select */ -#define SSCR0_NCS (1 << 21) /* Network clock select */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ -#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ -#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ -#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ -#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ -#endif - -#if defined(CONFIG_PXA3xx) -#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ -#endif - -#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ -#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ -#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ -#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ -#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ -#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ -#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ -#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ - -#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ -#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ -#define SSSR_BSY (1 << 4) /* SSP Busy */ -#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ -#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ -#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ - -#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ -#define SSCR0_NCS (1 << 21) /* Network Clock Select */ -#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ - -/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ -#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ -#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ -#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ -#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ -#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ -#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ -#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ -#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ -#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ -#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ -#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ -#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ -#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ -#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ -#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ -#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ -#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ -#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ -#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ - -#define SSSR_BCE (1 << 23) /* Bit Count Error */ -#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ -#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ -#define SSSR_EOC (1 << 20) /* End Of Chain */ -#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ -#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ - -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ -#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ - -#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ -#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ -#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ -#if defined(CONFIG_PXA3xx) -#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ -#endif - - -#endif /* __ASM_ARCH_REGS_SSP_H */ diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h deleted file mode 100644 index 3b1d4a72d4d..00000000000 --- a/include/asm-arm/arch-pxa/sharpsl.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * SharpSL SSP Driver - */ - -unsigned long corgi_ssp_ads7846_putget(unsigned long); -unsigned long corgi_ssp_ads7846_get(void); -void corgi_ssp_ads7846_put(unsigned long data); -void corgi_ssp_ads7846_lock(void); -void corgi_ssp_ads7846_unlock(void); -void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); -void corgi_ssp_blduty_set(int duty); -int corgi_ssp_max1111_get(unsigned long data); - -/* - * SharpSL Touchscreen Driver - */ - -struct corgits_machinfo { - unsigned long (*get_hsync_invperiod)(void); - void (*put_hsync)(void); - void (*wait_hsync)(void); -}; - - -/* - * SharpSL Backlight - */ -extern void corgibl_limit_intensity(int limit); - - -/* - * SharpSL Battery/PM Driver - */ -extern void sharpsl_battery_kick(void); diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h deleted file mode 100644 index bd14365f7ed..00000000000 --- a/include/asm-arm/arch-pxa/spitz.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Hardware specific definitions for SL-Cx000 series of PDAs - * - * Copyright (c) 2005 Alexander Wykes - * Copyright (c) 2005 Richard Purdie - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef __ASM_ARCH_SPITZ_H -#define __ASM_ARCH_SPITZ_H 1 -#endif - -#include - -/* Spitz/Akita GPIOs */ - -#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ -#define SPITZ_GPIO_RESET (1) -#define SPITZ_GPIO_nSD_DETECT (9) -#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */ -#define SPITZ_GPIO_AK_INT (13) /* Remote Control */ -#define SPITZ_GPIO_ADS7846_CS (14) -#define SPITZ_GPIO_SYNC (16) -#define SPITZ_GPIO_MAX1111_CS (20) -#define SPITZ_GPIO_FATAL_BAT (21) -#define SPITZ_GPIO_HSYNC (22) -#define SPITZ_GPIO_nSD_CLK (32) -#define SPITZ_GPIO_USB_DEVICE (35) -#define SPITZ_GPIO_USB_HOST (37) -#define SPITZ_GPIO_USB_CONNECT (41) -#define SPITZ_GPIO_LCDCON_CS (53) -#define SPITZ_GPIO_nPCE (54) -#define SPITZ_GPIO_nSD_WP (81) -#define SPITZ_GPIO_ON_RESET (89) -#define SPITZ_GPIO_BAT_COVER (90) -#define SPITZ_GPIO_CF_CD (94) -#define SPITZ_GPIO_ON_KEY (95) -#define SPITZ_GPIO_SWA (97) -#define SPITZ_GPIO_SWB (96) -#define SPITZ_GPIO_CHRG_FULL (101) -#define SPITZ_GPIO_CO (101) -#define SPITZ_GPIO_CF_IRQ (105) -#define SPITZ_GPIO_AC_IN (115) -#define SPITZ_GPIO_HP_IN (116) - -/* Spitz Only GPIOs */ - -#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ -#define SPITZ_GPIO_CF2_CD (93) - - -/* Spitz/Akita Keyboard Definitions */ - -#define SPITZ_KEY_STROBE_NUM (11) -#define SPITZ_KEY_SENSE_NUM (7) -#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 -#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 -#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 -#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 -#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 -#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 -#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 -#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 - -#define SPITZ_GPIO_KEY_STROBE0 88 -#define SPITZ_GPIO_KEY_STROBE1 23 -#define SPITZ_GPIO_KEY_STROBE2 24 -#define SPITZ_GPIO_KEY_STROBE3 25 -#define SPITZ_GPIO_KEY_STROBE4 26 -#define SPITZ_GPIO_KEY_STROBE5 27 -#define SPITZ_GPIO_KEY_STROBE6 52 -#define SPITZ_GPIO_KEY_STROBE7 103 -#define SPITZ_GPIO_KEY_STROBE8 107 -#define SPITZ_GPIO_KEY_STROBE9 108 -#define SPITZ_GPIO_KEY_STROBE10 114 - -#define SPITZ_GPIO_KEY_SENSE0 12 -#define SPITZ_GPIO_KEY_SENSE1 17 -#define SPITZ_GPIO_KEY_SENSE2 91 -#define SPITZ_GPIO_KEY_SENSE3 34 -#define SPITZ_GPIO_KEY_SENSE4 36 -#define SPITZ_GPIO_KEY_SENSE5 38 -#define SPITZ_GPIO_KEY_SENSE6 39 - - -/* Spitz Scoop Device (No. 1) GPIOs */ -/* Suspend States in comments */ -#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */ -#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */ -#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */ -#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */ -#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */ -#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */ -#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */ -#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ -#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ - -#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ - SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ - SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) -#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) -#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) -#define SPITZ_SCP_SUS_SET 0 - -/* Spitz Scoop Device (No. 2) GPIOs */ -/* Suspend States in comments */ -#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ -#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */ -#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ -#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ -#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ -#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ -#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */ -#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ -#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ - -#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ - SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ - SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) - -#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) -#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ - SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) -#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) - - -/* Spitz IRQ Definitions */ - -#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) -#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) -#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) -#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) -#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) -#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) -#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) -#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) -#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) -#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) -#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) -#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) -#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) -#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) -#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) -#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) -#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) - -/* - * Shared data structures - */ -extern struct platform_device spitzscoop_device; -extern struct platform_device spitzscoop2_device; -extern struct platform_device spitzssp_device; -extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h deleted file mode 100644 index a012882c9ee..00000000000 --- a/include/asm-arm/arch-pxa/ssp.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver supports the following PXA CPU/SSP ports:- - * - * PXA250 SSP - * PXA255 SSP, NSSP - * PXA26x SSP, NSSP, ASSP - * PXA27x SSP1, SSP2, SSP3 - * PXA3xx SSP1, SSP2, SSP3, SSP4 - */ - -#ifndef __ASM_ARCH_SSP_H -#define __ASM_ARCH_SSP_H - -#include - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - -struct ssp_device { - struct platform_device *pdev; - struct list_head node; - - struct clk *clk; - void __iomem *mmio_base; - unsigned long phys_base; - - const char *label; - int port_id; - int type; - int use_count; - int irq; - int drcmr_rx; - int drcmr_tx; -}; - -/* - * SSP initialisation flags - */ -#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */ - -struct ssp_state { - u32 cr0; - u32 cr1; - u32 to; - u32 psp; -}; - -struct ssp_dev { - struct ssp_device *ssp; - u32 port; - u32 mode; - u32 flags; - u32 psp_flags; - u32 speed; - int irq; -}; - -int ssp_write_word(struct ssp_dev *dev, u32 data); -int ssp_read_word(struct ssp_dev *dev, u32 *data); -int ssp_flush(struct ssp_dev *dev); -void ssp_enable(struct ssp_dev *dev); -void ssp_disable(struct ssp_dev *dev); -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); -void ssp_exit(struct ssp_dev *dev); - -struct ssp_device *ssp_request(int port, const char *label); -void ssp_free(struct ssp_device *); -#endif /* __ASM_ARCH_SSP_H */ diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h deleted file mode 100644 index 6956fc5235f..00000000000 --- a/include/asm-arm/arch-pxa/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/system.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include "hardware.h" -#include "pxa2xx-regs.h" -#include "pxa-regs.h" - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - - -void arch_reset(char mode); diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h deleted file mode 100644 index 8d882f0b6a1..00000000000 --- a/include/asm-arm/arch-pxa/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/timex.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#if defined(CONFIG_PXA25x) -/* PXA250/210 timer base */ -#define CLOCK_TICK_RATE 3686400 -#elif defined(CONFIG_PXA27x) -/* PXA27x timer base */ -#ifdef CONFIG_MACH_MAINSTONE -#define CLOCK_TICK_RATE 3249600 -#else -#define CLOCK_TICK_RATE 3250000 -#endif -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h deleted file mode 100644 index a72803f0461..00000000000 --- a/include/asm-arm/arch-pxa/tosa.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Hardware specific definitions for Sharp SL-C6000x series of PDAs - * - * Copyright (c) 2005 Dirk Opfer - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _ASM_ARCH_TOSA_H_ -#define _ASM_ARCH_TOSA_H_ 1 - -/* TOSA Chip selects */ -#define TOSA_LCDC_PHYS PXA_CS4_PHYS -/* Internel Scoop */ -#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000) -/* Jacket Scoop */ -#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) - -/* - * SCOOP2 internal GPIOs - */ -#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO -#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 -#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) -#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) -#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) -#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) -#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 -#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6) -#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7) -#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 - -/* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ - TOSA_SCOOP_AUD_PWR_ON) - -/* - * SCOOP2 jacket GPIOs - */ -#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) -#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) -#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) -#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) -#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) -#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4) -#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) -#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 -#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) -#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 - -/* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) - -/* - * TC6393XB GPIOs - */ -#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) -#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) -#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) - -#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) -#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) -#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) -#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) -#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) -#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) -#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) -#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) -#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) -#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) -#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) -#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) - -/* - * Timing Generator - */ -#define TG_PNLCTL 0x00 -#define TG_TPOSCTL 0x01 -#define TG_DUTYCTL 0x02 -#define TG_GPOSR 0x03 -#define TG_GPODR1 0x04 -#define TG_GPODR2 0x05 -#define TG_PINICTL 0x06 -#define TG_HPOSCTL 0x07 - -/* - * PXA GPIOs - */ -#define TOSA_GPIO_POWERON (0) -#define TOSA_GPIO_RESET (1) -#define TOSA_GPIO_AC_IN (2) -#define TOSA_GPIO_RECORD_BTN (3) -#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */ -#define TOSA_GPIO_USB_IN (5) -#define TOSA_GPIO_JACKET_DETECT (7) -#define TOSA_GPIO_nSD_DETECT (9) -#define TOSA_GPIO_nSD_INT (10) -#define TOSA_GPIO_TC6393XB_CLK (11) -#define TOSA_GPIO_BAT1_CRG (12) -#define TOSA_GPIO_CF_CD (13) -#define TOSA_GPIO_BAT0_CRG (14) -#define TOSA_GPIO_TC6393XB_INT (15) -#define TOSA_GPIO_BAT0_LOW (17) -#define TOSA_GPIO_TC6393XB_RDY (18) -#define TOSA_GPIO_ON_RESET (19) -#define TOSA_GPIO_EAR_IN (20) -#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ -#define TOSA_GPIO_ON_KEY (22) -#define TOSA_GPIO_VGA_LINE (27) -#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ -#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ -#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ -#define TOSA_GPIO_IRDA_TX (47) -#define TOSA_GPIO_TG_SPI_SCLK (81) -#define TOSA_GPIO_TG_SPI_CS (82) -#define TOSA_GPIO_TG_SPI_MOSI (83) -#define TOSA_GPIO_BAT1_LOW (84) - -#define TOSA_GPIO_HP_IN GPIO_EAR_IN - -#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW - -#define TOSA_KEY_STROBE_NUM (11) -#define TOSA_KEY_SENSE_NUM (7) - -#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000) -#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f) -#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0) -#define TOSA_GPIO_ALL_SENSE_RSHIFT (5) -#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a)) -#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a)) -#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000) -#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff) -#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00) -#define TOSA_GPIO_KEY_SENSE(a) (69+(a)) -#define TOSA_GPIO_KEY_STROBE(a) (58+(a)) - -/* - * Interrupts - */ -#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) -#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) -#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) -#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) -#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) -#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) -#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) -#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) -#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) -#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) -#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) -#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) -#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) -#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) -#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) -#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) -#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) -#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) -#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) -#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) -#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) - -#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) - -#define TOSA_KEY_SYNC KEY_102ND /* ??? */ - -#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES -#define TOSA_KEY_RECORD KEY_YEN -#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA -#define TOSA_KEY_CANCEL KEY_ESC -#define TOSA_KEY_CENTER KEY_HIRAGANA -#define TOSA_KEY_OK KEY_HENKAN -#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA -#define TOSA_KEY_HOMEPAGE KEY_HANGEUL -#define TOSA_KEY_LIGHT KEY_MUHENKAN -#define TOSA_KEY_MENU KEY_HANJA -#define TOSA_KEY_FN KEY_RIGHTALT -#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU -#else -#define TOSA_KEY_RECORD KEY_RECORD -#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK -#define TOSA_KEY_CANCEL KEY_CANCEL -#define TOSA_KEY_CENTER KEY_SELECT /* ??? */ -#define TOSA_KEY_OK KEY_OK -#define TOSA_KEY_CALENDAR KEY_CALENDAR -#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE -#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE -#define TOSA_KEY_MENU KEY_MENU -#define TOSA_KEY_FN KEY_FN -#define TOSA_KEY_MAIL KEY_MAIL -#endif - -#endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h deleted file mode 100644 index efc3c3d3b75..00000000000 --- a/include/asm-arm/arch-pxa/tosa_bt.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Tosa bluetooth built-in chip control. - * - * Later it may be shared with some other platforms. - * - * Copyright (c) 2008 Dmitry Baryshkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef TOSA_BT_H -#define TOSA_BT_H - -struct tosa_bt_data { - int gpio_pwr; - int gpio_reset; -}; - -#endif - diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/include/asm-arm/arch-pxa/trizeps4.h deleted file mode 100644 index 641d0ec110b..00000000000 --- a/include/asm-arm/arch-pxa/trizeps4.h +++ /dev/null @@ -1,106 +0,0 @@ -/************************************************************************ - * Include file for TRIZEPS4 SoM and ConXS eval-board - * Copyright (c) Jürgen Schindele - * 2006 - ************************************************************************/ - -/* - * Includes/Defines - */ -#ifndef _TRIPEPS4_H_ -#define _TRIPEPS4_H_ - -/* physical memory regions */ -#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */ -#define TRIZEPS4_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ -#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */ -#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */ - -#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */ -#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */ -#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/ -#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/ -#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/ - -/* virtual memory regions */ -#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */ - -#define TRIZEPS4_PIC_VIRT 0xF0100000 /* not used */ -#define TRIZEPS4_CFSR_VIRT 0xF0100000 -#define TRIZEPS4_BOCR_VIRT 0xF0200000 -#define TRIZEPS4_DICR_VIRT 0xF0300000 -#define TRIZEPS4_IRCR_VIRT 0xF0400000 -#define TRIZEPS4_UPSR_VIRT 0xF0500000 - -/* size of flash */ -#define TRIZEPS4_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ - -/* Ethernet Controller Davicom DM9000 */ -#define GPIO_DM9000 101 -#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000) - -/* UCB1400 audio / TS-controller */ -#define GPIO_UCB1400 1 -#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400) - -/* PCMCIA socket Compact Flash */ -#define GPIO_PCD 11 /* PCMCIA Card Detect */ -#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD) -#define GPIO_PRDY 13 /* READY / nINT */ -#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY) - -/* MMC socket */ -#define GPIO_MMC_DET 12 -#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) - -/* LEDS using tx2 / rx2 */ -#define GPIO_SYS_BUSY_LED 46 -#define GPIO_HEARTBEAT_LED 47 - -/* Off-module PIC on ConXS board */ -#define GPIO_PIC 0 -#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) - -#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) -#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) - -#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) -#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) - -#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) -#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) - -#ifndef __ASSEMBLY__ -#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000))) -#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000))) -#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000))) -#else -#define ConXS_CFSR CFSR_P2V(0x0C000000) -#define ConXS_BCR BCR_P2V(0x0E000000) -#define ConXS_DCR DCR_P2V(0x0F800000) -#endif - -#define ConXS_CFSR_BVD_MASK 0x0003 -#define ConXS_CFSR_BVD1 (1 << 0) -#define ConXS_CFSR_BVD2 (1 << 1) -#define ConXS_CFSR_VS_MASK 0x000C -#define ConXS_CFSR_VS1 (1 << 2) -#define ConXS_CFSR_VS2 (1 << 3) -#define ConXS_CFSR_VS_5V (0x3 << 2) -#define ConXS_CFSR_VS_3V3 0x0 - -#define ConXS_BCR_S0_POW_EN0 (1 << 0) -#define ConXS_BCR_S0_POW_EN1 (1 << 1) -#define ConXS_BCR_L_DISP (1 << 4) -#define ConXS_BCR_CF_BUF_EN (1 << 5) -#define ConXS_BCR_CF_RESET (1 << 7) -#define ConXS_BCR_S0_VCC_3V3 0x1 -#define ConXS_BCR_S0_VCC_5V0 0x2 -#define ConXS_BCR_S0_VPP_12V 0x4 -#define ConXS_BCR_S0_VPP_3V3 0x8 - -#define ConXS_IRCR_MODE (1 << 0) -#define ConXS_IRCR_SD (1 << 1) - -#endif /* _TRIPEPS4_H_ */ diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h deleted file mode 100644 index 27aa3a91012..00000000000 --- a/include/asm-arm/arch-pxa/udc.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/udc.h - * - */ -#include - -extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); - diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h deleted file mode 100644 index f4551269aaf..00000000000 --- a/include/asm-arm/arch-pxa/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/uncompress.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#define __REG(x) ((volatile unsigned long *)x) - -static volatile unsigned long *UART = FFUART; - -static inline void putc(char c) -{ - if (!(UART[UART_IER] & IER_UUE)) - return; - while (!(UART[UART_LSR] & LSR_TDRQ)) - barrier(); - UART[UART_TX] = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ - if (machine_is_littleton()) - UART = STUART; -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/include/asm-arm/arch-pxa/vmalloc.h deleted file mode 100644 index 5bb450c7aa2..00000000000 --- a/include/asm-arm/arch-pxa/vmalloc.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/vmalloc.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END (0xe8000000) diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h deleted file mode 100644 index 0d35ca04731..00000000000 --- a/include/asm-arm/arch-pxa/zylonite.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef __ASM_ARCH_ZYLONITE_H -#define __ASM_ARCH_ZYLONITE_H - -#define ZYLONITE_ETH_PHYS 0x14000000 - -#define EXT_GPIO(x) (128 + (x)) - -/* the following variables are processor specific and initialized - * by the corresponding zylonite_pxa3xx_init() - */ -struct platform_mmc_slot { - int gpio_cd; - int gpio_wp; -}; - -extern struct platform_mmc_slot zylonite_mmc_slot[]; - -extern int gpio_eth_irq; -extern int gpio_debug_led1; -extern int gpio_debug_led2; - -extern int wm9713_irq; - -extern int lcd_id; -extern int lcd_orientation; - -#ifdef CONFIG_CPU_PXA300 -extern void zylonite_pxa300_init(void); -#else -static inline void zylonite_pxa300_init(void) -{ - if (cpu_is_pxa300() || cpu_is_pxa310()) - panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__); -} -#endif - -#ifdef CONFIG_CPU_PXA320 -extern void zylonite_pxa320_init(void); -#else -static inline void zylonite_pxa320_init(void) -{ - if (cpu_is_pxa320()) - panic("%s: PXA320 not supported\n", __FUNCTION__); -} -#endif - -#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h deleted file mode 100644 index 206f7a75288..00000000000 --- a/include/asm-arm/arch-realview/board-eb.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * include/asm-arm/arch-realview/board-eb.h - * - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_EB_H -#define __ASM_ARCH_BOARD_EB_H - -#include - -/* - * RealView EB + ARM11MPCore peripheral addresses - */ -#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ - -#define REALVIEW_EB_FLASH_BASE 0x40000000 -#define REALVIEW_EB_FLASH_SIZE SZ_64M -#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ - -#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x10100700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ -#else -#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x1F000700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ -#endif - -#define IRQ_EB_GIC_START 32 - -/* - * RealView EB interrupt sources - */ -#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ -#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ -#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ -#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ -#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ -#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ -#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ -#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ -#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ -#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ -#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ -#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ -#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ -#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ -#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ -#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ - -/* - * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) - */ -#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) -#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) -#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) -#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) -#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) -#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) -#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) -#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) -#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) -#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) -#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ -#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ -#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ -#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ -#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) -#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) - -#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) -#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) -#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) -#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) -#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) -#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) -#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) -#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) -#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) -#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) -#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) -#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) - -#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) -#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) -#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) - -#define IRQ_EB11MP_UART2 -1 -#define IRQ_EB11MP_UART3 -1 -#define IRQ_EB11MP_CLCD -1 -#define IRQ_EB11MP_DMA -1 -#define IRQ_EB11MP_WDOG -1 -#define IRQ_EB11MP_GPIO0 -1 -#define IRQ_EB11MP_GPIO1 -1 -#define IRQ_EB11MP_GPIO2 -1 -#define IRQ_EB11MP_SCI -1 -#define IRQ_EB11MP_SSP -1 - -#define NR_GIC_EB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - -/* - * Core tile identification (REALVIEW_SYS_PROCID) - */ -#define REALVIEW_EB_PROC_MASK 0xFF000000 -#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000 -#define REALVIEW_EB_PROC_ARM9 0x02000000 -#define REALVIEW_EB_PROC_ARM11 0x04000000 -#define REALVIEW_EB_PROC_ARM11MP 0x06000000 - -#define check_eb_proc(proc_type) \ - ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ - == proc_type) - -#ifdef CONFIG_REALVIEW_EB_ARM11MP -#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP) -#else -#define core_tile_eb11mp() 0 -#endif - -#endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h deleted file mode 100644 index 48ce9c83370..00000000000 --- a/include/asm-arm/arch-realview/board-pb1176.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-arm/arch-realview/board-pb1176.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB1176_H -#define __ASM_ARCH_BOARD_PB1176_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ -#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ -#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ -#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_PB1176_FLASH_BASE 0x30000000 -#define REALVIEW_PB1176_FLASH_SIZE SZ_64M - -#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ -#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ -#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ -#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ -#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ -#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ -#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ -#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ -#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ -#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ -#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ -#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ -#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ -#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ - -/* - * PCI regions - */ -#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ -#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ -#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ -#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ -#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ -#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ - -#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ - -#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ -#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ -#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ -#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ -#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ - -/* - * Irqs - */ -#define IRQ_DC1176_GIC_START 32 -#define IRQ_PB1176_GIC_START 64 - -/* - * ARM1176 DevChip interrupt sources (primary GIC) - */ -#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ -#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ -#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ -#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ -#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ -#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) -#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) -#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) -#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) -#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ -#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ -#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ -#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ - -#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ -#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ - -/* - * RealView PB1176 interrupt sources (secondary GIC) - */ -#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ -#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ -#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ -#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ -#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) -#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ -#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ -#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) -#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) -#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ -#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ - -#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) - -#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ - -#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) -#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) -#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ -#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ - -#define IRQ_PB1176_GPIO0 -1 -#define IRQ_PB1176_SSP -1 -#define IRQ_PB1176_SCTL -1 - -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB1176 */ - -#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h deleted file mode 100644 index a1294d915fa..00000000000 --- a/include/asm-arm/arch-realview/board-pb11mp.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * include/asm-arm/arch-realview/board-pb11mp.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB11MP_H -#define __ASM_ARCH_BOARD_PB11MP_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ -#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ -#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 -#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M -#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 -#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M -#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 - -/* - * PB11MPCore PCI regions - */ -#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -/* - * Testchip peripheral and fpga gic regions - */ -#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ -#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ -#define REALVIEW_TC11MP_TWD_BASE 0x1F000700 -#define REALVIEW_TC11MP_TWD_SIZE 0x00000100 -#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ -#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ - -/* - * Irqs - */ -#define IRQ_TC11MP_GIC_START 32 -#define IRQ_PB11MP_GIC_START 64 - -/* - * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) - */ -#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) -#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) -#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) -#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) -#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) -#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) -#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) -#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) -#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) -#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) -#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ -#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ -#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ -#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ -#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) -#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) - -#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) -#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) -#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) -#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) -#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) -#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) -#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) -#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) -#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) -#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) -#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) -#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) - -#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) -#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) -#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) - -/* - * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) - */ -#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ -#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ -#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ -#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ -#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ -#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ -#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ -#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ -#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - -#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S deleted file mode 100644 index c8c860c3c26..00000000000 --- a/include/asm-arm/arch-realview/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-realview/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf0000000 @ virtual base - orr \rx, \rx, #0x00009000 - .endm - -#include diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h deleted file mode 100644 index 8342e3f9d6e..00000000000 --- a/include/asm-arm/arch-realview/dma.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/dma.h - * - * Copyright (C) 2003 ARM Limited. - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S deleted file mode 100644 index 31a39a7cdaa..00000000000 --- a/include/asm-arm/arch-realview/entry-macro.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * include/asm-arm/arch-realview/entry-macro.S - * - * Low-level IRQ helper macros for RealView platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h deleted file mode 100644 index 1ee8313ceb6..00000000000 --- a/include/asm-arm/arch-realview/hardware.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/hardware.h - * - * This file contains the hardware definitions of the RealView boards. - * - * Copyright (C) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000) -#define __io_address(n) __io(IO_ADDRESS(n)) - -#endif diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h deleted file mode 100644 index c70f1dfbe13..00000000000 --- a/include/asm-arm/arch-realview/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h deleted file mode 100644 index ccbac59235c..00000000000 --- a/include/asm-arm/arch-realview/irqs.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include -#include -#include - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -#define IRQ_GIC_START 32 - -#ifndef NR_IRQS -#error "NR_IRQS not defined by the board-specific files" -#endif - -#endif diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h deleted file mode 100644 index ed370abb638..00000000000 --- a/include/asm-arm/arch-realview/memory.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h deleted file mode 100644 index 424c0aaf46a..00000000000 --- a/include/asm-arm/arch-realview/platform.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/platform.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PLATFORM_H -#define __ASM_ARCH_PLATFORM_H - -/* - * Memory definitions - */ -#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ -#define REALVIEW_BOOT_ROM_HI 0x30000000 -#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */ -#define REALVIEW_BOOT_ROM_SIZE SZ_64M - -#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ -#define REALVIEW_SSRAM_SIZE SZ_2M - -/* - * SDRAM - */ -#define REALVIEW_SDRAM_BASE 0x00000000 - -/* - * Logic expansion modules - * - */ - - -/* ------------------------------------------------------------------------ - * RealView Registers - * ------------------------------------------------------------------------ - * - */ -#define REALVIEW_SYS_ID_OFFSET 0x00 -#define REALVIEW_SYS_SW_OFFSET 0x04 -#define REALVIEW_SYS_LED_OFFSET 0x08 -#define REALVIEW_SYS_OSC0_OFFSET 0x0C - -#define REALVIEW_SYS_OSC1_OFFSET 0x10 -#define REALVIEW_SYS_OSC2_OFFSET 0x14 -#define REALVIEW_SYS_OSC3_OFFSET 0x18 -#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */ - -#define REALVIEW_SYS_LOCK_OFFSET 0x20 -#define REALVIEW_SYS_100HZ_OFFSET 0x24 -#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28 -#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C -#define REALVIEW_SYS_FLAGS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34 -#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C -#define REALVIEW_SYS_RESETCTL_OFFSET 0x40 -#define REALVIEW_SYS_PCICTL_OFFSET 0x44 -#define REALVIEW_SYS_MCI_OFFSET 0x48 -#define REALVIEW_SYS_FLASH_OFFSET 0x4C -#define REALVIEW_SYS_CLCD_OFFSET 0x50 -#define REALVIEW_SYS_CLCDSER_OFFSET 0x54 -#define REALVIEW_SYS_BOOTCS_OFFSET 0x58 -#define REALVIEW_SYS_24MHz_OFFSET 0x5C -#define REALVIEW_SYS_MISC_OFFSET 0x60 -#define REALVIEW_SYS_IOSEL_OFFSET 0x70 -#define REALVIEW_SYS_PROCID_OFFSET 0x84 -#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0 -#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4 -#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8 -#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC -#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0 - -#define REALVIEW_SYS_BASE 0x10000000 -#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) -#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET) -#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET) -#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET) -#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET) - -#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET) -#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET) -#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET) -#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET) -#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET) -#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET) -#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET) -#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET) -#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET) -#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET) -#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET) -#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET) -#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET) -#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET) -#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET) -#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET) -#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET) -#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) -#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) -#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) -#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET) -#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) -#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) -#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) -#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) -#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) - -/* - * Values for REALVIEW_SYS_RESET_CTRL - */ -#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03 -#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04 -#define REALVIEW_SYS_CTRL_RESET_POR 0x05 -#define REALVIEW_SYS_CTRL_RESET_DoC 0x06 - -#define REALVIEW_SYS_CTRL_LED (1 << 0) - - -/* ------------------------------------------------------------------------ - * RealView control registers - * ------------------------------------------------------------------------ - */ - -/* - * REALVIEW_IDFIELD - * - * 31:24 = manufacturer (0x41 = ARM) - * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) - * 15:12 = FPGA (0x3 = XVC600 or XVC600E) - * 11:4 = build value - * 3:0 = revision number (0x1 = rev B (AHB)) - */ - -/* - * REALVIEW_SYS_LOCK - * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, - * SYS_CLD, SYS_BOOTCS - */ -#define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ - -/* - * REALVIEW_SYS_FLASH - */ -#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ - -/* - * REALVIEW_INTREG - * - used to acknowledge and control MMCI and UART interrupts - */ -#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ -#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ -#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */ - /* write 1 to acknowledge and clear */ -#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ -#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ - -/* - * RealView common peripheral addresses - */ -#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ -#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ -#define REALVIEW_AACI_BASE 0x10004000 /* Audio */ -#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ -#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ -#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ -#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ -#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ -#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ -#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ -#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ - -/* PCI space */ -#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ -#define REALVIEW_PCI_CFG_BASE 0x42000000 -#define REALVIEW_PCI_MEM_BASE0 0x44000000 -#define REALVIEW_PCI_MEM_BASE1 0x50000000 -#define REALVIEW_PCI_MEM_BASE2 0x60000000 -/* Sizes of above maps */ -#define REALVIEW_PCI_BASE_SIZE 0x01000000 -#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000 -#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ -#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ -#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ - -#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ - -/* - * Disk on Chip - */ -#define REALVIEW_DOC_BASE 0x2C000000 -#define REALVIEW_DOC_SIZE (16 << 20) -#define REALVIEW_DOC_PAGE_SIZE 512 -#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) - -#define ERASE_UNIT_PAGES 32 -#define START_PAGE 0x80 - -/* - * LED settings, bits [7:0] - */ -#define REALVIEW_SYS_LED0 (1 << 0) -#define REALVIEW_SYS_LED1 (1 << 1) -#define REALVIEW_SYS_LED2 (1 << 2) -#define REALVIEW_SYS_LED3 (1 << 3) -#define REALVIEW_SYS_LED4 (1 << 4) -#define REALVIEW_SYS_LED5 (1 << 5) -#define REALVIEW_SYS_LED6 (1 << 6) -#define REALVIEW_SYS_LED7 (1 << 7) - -#define ALL_LEDS 0xFF - -#define LED_BANK REALVIEW_SYS_LED - -/* - * Control registers - */ -#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */ -#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */ -#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ -#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ - -/* - * Application Flash - * - */ -#define FLASH_BASE REALVIEW_FLASH_BASE -#define FLASH_SIZE REALVIEW_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE REALVIEW_BOOT_ROM_HI -#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE EPROM_BASE - -/* - * System controller bit assignment - */ -#define REALVIEW_REFCLK 0 -#define REALVIEW_TIMCLK 1 - -#define REALVIEW_TIMER1_EnSel 15 -#define REALVIEW_TIMER2_EnSel 17 -#define REALVIEW_TIMER3_EnSel 19 -#define REALVIEW_TIMER4_EnSel 21 - - -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - -#define REALVIEW_CSR_BASE 0x10000000 -#define REALVIEW_CSR_SIZE 0x10000000 - -#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h deleted file mode 100644 index d55802d645a..00000000000 --- a/include/asm-arm/arch-realview/scu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASMARM_ARCH_SCU_H -#define __ASMARM_ARCH_SCU_H - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/include/asm-arm/arch-realview/smp.h b/include/asm-arm/arch-realview/smp.h deleted file mode 100644 index 515819efd04..00000000000 --- a/include/asm-arm/arch-realview/smp.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef ASMARM_ARCH_SMP_H -#define ASMARM_ARCH_SMP_H - - -#include - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - -/* - * We use IRQ1 as the IPI - */ -static inline void smp_cross_call(cpumask_t callmap) -{ - gic_raise_softirq(callmap, 1); -} - -/* - * Do nothing on MPcore. - */ -static inline void smp_cross_call_done(cpumask_t callmap) -{ -} - -#endif diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h deleted file mode 100644 index bff3d3fcf84..00000000000 --- a/include/asm-arm/arch-realview/system.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; - unsigned int val; - - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - val = __raw_readl(hdr_ctrl); - val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); -} - -#endif diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h deleted file mode 100644 index 5b9d82d0a5e..00000000000 --- a/include/asm-arm/arch-realview/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/timex.h - * - * RealView architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h deleted file mode 100644 index 3f7ae2e0260..00000000000 --- a/include/asm-arm/arch-realview/uncompress.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include - -#include -#include -#include - -#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) -#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) -#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) -#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) - -/* - * Return the UART base address - */ -static inline unsigned long get_uart_base(void) -{ - if (machine_is_realview_eb()) - return REALVIEW_EB_UART0_BASE; - else if (machine_is_realview_pb11mp()) - return REALVIEW_PB11MP_UART0_BASE; - else if (machine_is_realview_pb1176()) - return REALVIEW_PB1176_UART0_BASE; - else - return 0; -} - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 5)) - barrier(); - - AMBA_UART_DR(base) = c; -} - -static inline void flush(void) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h deleted file mode 100644 index 0ad49af186a..00000000000 --- a/include/asm-arm/arch-realview/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/vmalloc.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/include/asm-arm/arch-rpc/acornfb.h b/include/asm-arm/arch-rpc/acornfb.h deleted file mode 100644 index ecb7733a094..00000000000 --- a/include/asm-arm/arch-rpc/acornfb.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/acornfb.h - * - * Copyright (C) 1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * AcornFB architecture specific code - */ - -#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel) - -static inline int -acornfb_valid_pixrate(struct fb_var_screeninfo *var) -{ - u_long limit; - - if (!var->pixclock) - return 0; - - /* - * Limits below are taken from RISC OS bandwidthlimit file - */ - if (current_par.using_vram) { - if (current_par.vram_half_sam == 2048) - limit = 6578; - else - limit = 13157; - } else { - limit = 26315; - } - - return acornfb_bandwidth(var) >= limit; -} - -/* - * Try to find the best PLL parameters for the pixel clock. - * This algorithm seems to give best predictable results, - * and produces the same values as detailed in the VIDC20 - * data sheet. - */ -static inline u_int -acornfb_vidc20_find_pll(u_int pixclk) -{ - u_int r, best_r = 2, best_v = 2; - int best_d = 0x7fffffff; - - for (r = 2; r <= 32; r++) { - u_int rr, v, p; - int d; - - rr = 41667 * r; - - v = (rr + pixclk / 2) / pixclk; - - if (v > 32 || v < 2) - continue; - - p = (rr + v / 2) / v; - - d = pixclk - p; - - if (d < 0) - d = -d; - - if (d < best_d) { - best_d = d; - best_v = v - 1; - best_r = r - 1; - } - - if (d == 0) - break; - } - - return best_v << 8 | best_r; -} - -static inline void -acornfb_vidc20_find_rates(struct vidc_timing *vidc, - struct fb_var_screeninfo *var) -{ - u_int div; - - /* Select pixel-clock divisor to keep PLL in range */ - div = var->pixclock / 9090; /*9921*/ - - /* Limit divisor */ - if (div == 0) - div = 1; - if (div > 8) - div = 8; - - /* Encode divisor to VIDC20 setting */ - switch (div) { - case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break; - case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break; - case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break; - case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break; - case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break; - case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break; - case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break; - case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break; - } - - /* - * With VRAM, the FIFO can be set to the highest possible setting - * because there are no latency considerations for other memory - * accesses. However, in 64 bit bus mode the FIFO preload value - * must not be set to VIDC20_CTRL_FIFO_28 because this will let - * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the - * FIFO preload value). - */ - if (current_par.using_vram) { - if (current_par.vram_half_sam == 2048) - vidc->control |= VIDC20_CTRL_FIFO_24; - else - vidc->control |= VIDC20_CTRL_FIFO_28; - } else { - unsigned long bandwidth = acornfb_bandwidth(var); - - /* Encode bandwidth as VIDC20 setting */ - if (bandwidth > 33334) /* < 30.0MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_16; - else if (bandwidth > 26666) /* < 37.5MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_20; - else if (bandwidth > 22222) /* < 45.0MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_24; - else /* > 45.0MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_28; - } - - /* Find the PLL values */ - vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div); -} - -#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK) -#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3)) diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S deleted file mode 100644 index c634c8d8f4a..00000000000 --- a/include/asm-arm/arch-rpc/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-rpc/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x03000000 - movne \rx, #0xe0000000 - orr \rx, \rx, #0x00010000 - orr \rx, \rx, #0x00000fe0 - .endm - -#define UART_SHIFT 2 -#define FLOW_CONTROL -#include diff --git a/include/asm-arm/arch-rpc/dma.h b/include/asm-arm/arch-rpc/dma.h deleted file mode 100644 index d24a27e30b9..00000000000 --- a/include/asm-arm/arch-rpc/dma.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/dma.h - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 -#define MAX_DMA_CHANNELS 8 - -#define DMA_0 0 -#define DMA_1 1 -#define DMA_2 2 -#define DMA_3 3 -#define DMA_S0 4 -#define DMA_S1 5 -#define DMA_VIRTUAL_FLOPPY 6 -#define DMA_VIRTUAL_SOUND 7 - -#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S deleted file mode 100644 index 5bd55557ccc..00000000000 --- a/include/asm-arm/arch-rpc/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -#include -#include - - .equ ioc_base_high, IOC_BASE & 0xff000000 - .equ ioc_base_low, IOC_BASE & 0x00ff0000 - - .macro get_irqnr_preamble, base, tmp - mov \base, #ioc_base_high @ point at IOC - .if ioc_base_low - orr \base, \base, #ioc_base_low - .endif - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - diff --git a/include/asm-arm/arch-rpc/hardware.h b/include/asm-arm/arch-rpc/hardware.h deleted file mode 100644 index 7480f4e8d97..00000000000 --- a/include/asm-arm/arch-rpc/hardware.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/hardware.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains the hardware definitions of the RiscPC series machines. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -#ifndef __ASSEMBLY__ -#define IOMEM(x) ((void __iomem *)(unsigned long)(x)) -#else -#define IOMEM(x) x -#endif /* __ASSEMBLY__ */ - -/* - * What hardware must be present - */ -#define HAS_IOMD -#define HAS_VIDC20 - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ -#define RAM_SIZE 0x10000000 -#define RAM_START 0x10000000 - -#define EASI_SIZE 0x08000000 /* EASI I/O */ -#define EASI_START 0x08000000 -#define EASI_BASE 0xe5000000 - -#define IO_START 0x03000000 /* I/O */ -#define IO_SIZE 0x01000000 -#define IO_BASE IOMEM(0xe0000000) - -#define SCREEN_START 0x02000000 /* VRAM */ -#define SCREEN_END 0xdfc00000 -#define SCREEN_BASE 0xdf800000 - -#define UNCACHEABLE_ADDR 0xdf010000 - -/* - * IO Addresses - */ -#define VIDC_BASE IOMEM(0xe0400000) -#define EXPMASK_BASE 0xe0360000 -#define IOMD_BASE IOMEM(0xe0200000) -#define IOC_BASE IOMEM(0xe0200000) -#define PCIO_BASE IOMEM(0xe0010000) -#define FLOPPYDMA_BASE IOMEM(0xe002a000) - -#define vidc_writel(val) __raw_writel(val, VIDC_BASE) - -#define IO_EC_EASI_BASE 0x81400000 -#define IO_EC_IOC4_BASE 0x8009c000 -#define IO_EC_IOC_BASE 0x80090000 -#define IO_EC_MEMC8_BASE 0x8000ac00 -#define IO_EC_MEMC_BASE 0x80000000 - -#define NETSLOT_BASE 0x0302b000 -#define NETSLOT_SIZE 0x00001000 - -#define PODSLOT_IOC0_BASE 0x03240000 -#define PODSLOT_IOC4_BASE 0x03270000 -#define PODSLOT_IOC_SIZE (1 << 14) -#define PODSLOT_MEMC_BASE 0x03000000 -#define PODSLOT_MEMC_SIZE (1 << 14) -#define PODSLOT_EASI_BASE 0x08000000 -#define PODSLOT_EASI_SIZE (1 << 24) - -#define EXPMASK_STATUS (EXPMASK_BASE + 0x00) -#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04) - -#endif diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h deleted file mode 100644 index 0d10d4591a4..00000000000 --- a/include/asm-arm/arch-rpc/io.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/io.h - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * GCC is totally crap at loading/storing data. We try to persuade it - * to do the right thing by using these whereever possible instead of - * the above. - */ -#define __arch_base_getb(b,o) \ - ({ \ - unsigned int __v, __r = (b); \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2]" \ - : "=r" (__v) \ - : "r" (__r), "Ir" (o)); \ - __v; \ - }) - -#define __arch_base_getl(b,o) \ - ({ \ - unsigned int __v, __r = (b); \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2]" \ - : "=r" (__v) \ - : "r" (__r), "Ir" (o)); \ - __v; \ - }) - -#define __arch_base_putb(v,b,o) \ - ({ \ - unsigned int __r = (b); \ - __asm__ __volatile__( \ - "strb %0, [%1, %2]" \ - : \ - : "r" (v), "r" (__r), "Ir" (o));\ - }) - -#define __arch_base_putl(v,b,o) \ - ({ \ - unsigned int __r = (b); \ - __asm__ __volatile__( \ - "str %0, [%1, %2]" \ - : \ - : "r" (v), "r" (__r), "Ir" (o));\ - }) - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. Note that all addresses are - * shifted left! - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -/* - * Dynamic IO functions. - */ -static inline void __outb (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "strb %1, [%0, %2, lsl #2] @ outb" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outw (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outw" - : "=&r" (temp) - : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outl (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outl" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__deprecated __ioaddr(unsigned int port) -{ - void __iomem *ret; - if (__PORT_PCIO(port)) - ret = PCIO_BASE; - else - ret = IO_BASE; - return ret + (port << 2); -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __ioaddrc(port) __ioaddr(port) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) -#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) ((unsigned long)__ioaddr((port))) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) - -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - -#endif diff --git a/include/asm-arm/arch-rpc/irqs.h b/include/asm-arm/arch-rpc/irqs.h deleted file mode 100644 index 27c35b05b27..00000000000 --- a/include/asm-arm/arch-rpc/irqs.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/irqs.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define IRQ_PRINTER 0 -#define IRQ_BATLOW 1 -#define IRQ_FLOPPYINDEX 2 -#define IRQ_VSYNCPULSE 3 -#define IRQ_POWERON 4 -#define IRQ_TIMER0 5 -#define IRQ_TIMER1 6 -#define IRQ_IMMEDIATE 7 -#define IRQ_EXPCARDFIQ 8 -#define IRQ_HARDDISK 9 -#define IRQ_SERIALPORT 10 -#define IRQ_FLOPPYDISK 12 -#define IRQ_EXPANSIONCARD 13 -#define IRQ_KEYBOARDTX 14 -#define IRQ_KEYBOARDRX 15 - -#define IRQ_DMA0 16 -#define IRQ_DMA1 17 -#define IRQ_DMA2 18 -#define IRQ_DMA3 19 -#define IRQ_DMAS0 20 -#define IRQ_DMAS1 21 - -#define FIQ_FLOPPYDATA 0 -#define FIQ_ECONET 2 -#define FIQ_SERIALPORT 4 -#define FIQ_EXPANSIONCARD 6 -#define FIQ_FORCE 7 - -/* - * This is the offset of the FIQ "IRQ" numbers - */ -#define FIQ_START 64 - -#define IRQ_TIMER IRQ_TIMER0 - diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h deleted file mode 100644 index 303c424ce67..00000000000 --- a/include/asm-arm/arch-rpc/memory.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 11-Jan-1998 RMK Uninlined to reduce hits on cache - * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Added TASK_SIZE and PAGE_OFFSET - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x10000000) - -/* - * These are exactly the same on the RiscPC as the - * physical memory view. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - ROM - */ -#define FLUSH_BASE_PHYS 0x00000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h deleted file mode 100644 index ca3277d1d5e..00000000000 --- a/include/asm-arm/arch-rpc/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - iomd_writeb(0, IOMD_ROMCR0); - - /* - * Jump into the ROM - */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-rpc/timex.h b/include/asm-arm/arch-rpc/timex.h deleted file mode 100644 index ed7df64d960..00000000000 --- a/include/asm-arm/arch-rpc/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * RiscPC architecture timex specifications - */ - -/* - * On the RiscPC, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h deleted file mode 100644 index 844e4d469fb..00000000000 --- a/include/asm-arm/arch-rpc/uncompress.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/uncompress.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VIDMEM ((char *)SCREEN_START) - -#include -#include -#include -#include - -int video_size_row; -unsigned char bytes_per_char_h; -extern unsigned long con_charconvtable[256]; - -struct param_struct { - unsigned long page_size; - unsigned long nr_pages; - unsigned long ramdisk_size; - unsigned long mountrootrdonly; - unsigned long rootdev; - unsigned long video_num_cols; - unsigned long video_num_rows; - unsigned long video_x; - unsigned long video_y; - unsigned long memc_control_reg; - unsigned char sounddefault; - unsigned char adfsdrives; - unsigned char bytes_per_char_h; - unsigned char bytes_per_char_v; - unsigned long unused[256/4-11]; -}; - -static const unsigned long palette_4[16] = { - 0x00000000, - 0x000000cc, - 0x0000cc00, /* Green */ - 0x0000cccc, /* Yellow */ - 0x00cc0000, /* Blue */ - 0x00cc00cc, /* Magenta */ - 0x00cccc00, /* Cyan */ - 0x00cccccc, /* White */ - 0x00000000, - 0x000000ff, - 0x0000ff00, - 0x0000ffff, - 0x00ff0000, - 0x00ff00ff, - 0x00ffff00, - 0x00ffffff -}; - -#define palette_setpixel(p) *(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255) -#define palette_write(v) *(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff) - -/* - * params_phys is a linker defined symbol - see - * arch/arm/boot/compressed/Makefile - */ -extern __attribute__((pure)) struct param_struct *params(void); -#define params (params()) - -#ifndef STANDALONE_DEBUG -static unsigned long video_num_cols; -static unsigned long video_num_rows; -static unsigned long video_x; -static unsigned long video_y; -static unsigned char bytes_per_char_v; -static int white; - -/* - * This does not append a newline - */ -static void putc(int c) -{ - extern void ll_write_char(char *, char c, char white); - int x,y; - char *ptr; - - x = video_x; - y = video_y; - - if (c == '\n') { - if (++y >= video_num_rows) - y--; - } else if (c == '\r') { - x = 0; - } else { - ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h); - ll_write_char(ptr, c, white); - if (++x >= video_num_cols) { - x = 0; - if ( ++y >= video_num_rows ) { - y--; - } - } - } - - video_x = x; - video_y = y; -} - -static inline void flush(void) -{ -} - -static void error(char *x); - -/* - * Setup for decompression - */ -static void arch_decomp_setup(void) -{ - int i; - struct tag *t = (struct tag *)params; - unsigned int nr_pages = 0, page_size = PAGE_SIZE; - - if (t->hdr.tag == ATAG_CORE) - { - for (; t->hdr.size; t = tag_next(t)) - { - if (t->hdr.tag == ATAG_VIDEOTEXT) - { - video_num_rows = t->u.videotext.video_lines; - video_num_cols = t->u.videotext.video_cols; - bytes_per_char_h = t->u.videotext.video_points; - bytes_per_char_v = t->u.videotext.video_points; - video_x = t->u.videotext.x; - video_y = t->u.videotext.y; - } - - if (t->hdr.tag == ATAG_MEM) - { - page_size = PAGE_SIZE; - nr_pages += (t->u.mem.size / PAGE_SIZE); - } - } - } - else - { - nr_pages = params->nr_pages; - page_size = params->page_size; - video_num_rows = params->video_num_rows; - video_num_cols = params->video_num_cols; - video_x = params->video_x; - video_y = params->video_y; - bytes_per_char_h = params->bytes_per_char_h; - bytes_per_char_v = params->bytes_per_char_v; - } - - video_size_row = video_num_cols * bytes_per_char_h; - - if (bytes_per_char_h == 4) - for (i = 0; i < 256; i++) - con_charconvtable[i] = - (i & 128 ? 1 << 0 : 0) | - (i & 64 ? 1 << 4 : 0) | - (i & 32 ? 1 << 8 : 0) | - (i & 16 ? 1 << 12 : 0) | - (i & 8 ? 1 << 16 : 0) | - (i & 4 ? 1 << 20 : 0) | - (i & 2 ? 1 << 24 : 0) | - (i & 1 ? 1 << 28 : 0); - else - for (i = 0; i < 16; i++) - con_charconvtable[i] = - (i & 8 ? 1 << 0 : 0) | - (i & 4 ? 1 << 8 : 0) | - (i & 2 ? 1 << 16 : 0) | - (i & 1 ? 1 << 24 : 0); - - - palette_setpixel(0); - if (bytes_per_char_h == 1) { - palette_write (0); - palette_write (0x00ffffff); - for (i = 2; i < 256; i++) - palette_write (0); - white = 1; - } else { - for (i = 0; i < 256; i++) - palette_write (i < 16 ? palette_4[i] : 0); - white = 7; - } - - if (nr_pages * page_size < 4096*1024) error("<4M of mem\n"); -} -#endif - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/include/asm-arm/arch-rpc/vmalloc.h deleted file mode 100644 index 077046bb2f3..00000000000 --- a/include/asm-arm/arch-rpc/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/vmalloc.h - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END (PAGE_OFFSET + 0x1c000000) diff --git a/include/asm-arm/arch-s3c2400/map.h b/include/asm-arm/arch-s3c2400/map.h deleted file mode 100644 index 1184d907b31..00000000000 --- a/include/asm-arm/arch-s3c2400/map.h +++ /dev/null @@ -1,66 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2400/map.h - * - * Copyright 2003,2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * Copyright 2003, Lucas Correia Villa Real - * - * S3C2400 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C2400_PA_MEMCTRL (0x14000000) -#define S3C2400_PA_USBHOST (0x14200000) -#define S3C2400_PA_IRQ (0x14400000) -#define S3C2400_PA_DMA (0x14600000) -#define S3C2400_PA_CLKPWR (0x14800000) -#define S3C2400_PA_LCD (0x14A00000) -#define S3C2400_PA_UART (0x15000000) -#define S3C2400_PA_TIMER (0x15100000) -#define S3C2400_PA_USBDEV (0x15200140) -#define S3C2400_PA_WATCHDOG (0x15300000) -#define S3C2400_PA_IIC (0x15400000) -#define S3C2400_PA_IIS (0x15508000) -#define S3C2400_PA_GPIO (0x15600000) -#define S3C2400_PA_RTC (0x15700040) -#define S3C2400_PA_ADC (0x15800000) -#define S3C2400_PA_SPI (0x15900000) - -#define S3C2400_PA_MMC (0x15A00000) -#define S3C2400_SZ_MMC SZ_1M - -/* physical addresses of all the chip-select areas */ - -#define S3C2400_CS0 (0x00000000) -#define S3C2400_CS1 (0x02000000) -#define S3C2400_CS2 (0x04000000) -#define S3C2400_CS3 (0x06000000) -#define S3C2400_CS4 (0x08000000) -#define S3C2400_CS5 (0x0A000000) -#define S3C2400_CS6 (0x0C000000) -#define S3C2400_CS7 (0x0E000000) - -#define S3C2400_SDRAM_PA (S3C2400_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2400_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST -#define S3C24XX_PA_DMA S3C2400_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2400_PA_LCD -#define S3C24XX_PA_UART S3C2400_PA_UART -#define S3C24XX_PA_TIMER S3C2400_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2400_PA_IIC -#define S3C24XX_PA_IIS S3C2400_PA_IIS -#define S3C24XX_PA_GPIO S3C2400_PA_GPIO -#define S3C24XX_PA_RTC S3C2400_PA_RTC -#define S3C24XX_PA_ADC S3C2400_PA_ADC -#define S3C24XX_PA_SPI S3C2400_PA_SPI diff --git a/include/asm-arm/arch-s3c2400/memory.h b/include/asm-arm/arch-s3c2400/memory.h deleted file mode 100644 index fb0381dde70..00000000000 --- a/include/asm-arm/arch-s3c2400/memory.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2400/memory.h - * from linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x0C000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h deleted file mode 100644 index 168b93fee52..00000000000 --- a/include/asm-arm/arch-s3c2410/anubis-cpld.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISCPLD_H -#define __ASM_ARCH_ANUBISCPLD_H - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define ANUBIS_CTRL1_NANDSEL (0x3) - -/* IDREG - revision */ - -#define ANUBIS_IDREG_REVMASK (0x7) - -#endif /* __ASM_ARCH_ANUBISCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h deleted file mode 100644 index cd77a70d45c..00000000000 --- a/include/asm-arm/arch-s3c2410/anubis-irq.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISIRQ_H -#define __ASM_ARCH_ANUBISIRQ_H - -#define IRQ_IDE0 IRQ_EINT2 -#define IRQ_IDE1 IRQ_EINT3 -#define IRQ_ASIX IRQ_EINT1 - -#endif /* __ASM_ARCH_ANUBISIRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h deleted file mode 100644 index 830d114261d..00000000000 --- a/include/asm-arm/arch-s3c2410/anubis-map.h +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/anubis-map.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_ANUBISMAP_H -#define __ASM_ARCH_ANUBISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) - -#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */ -#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD) - -#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */ -#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23)) - -#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) -#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) -#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) -#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) - -#endif /* __ASM_ARCH_ANUBISMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h deleted file mode 100644 index 0a6977fb577..00000000000 --- a/include/asm-arm/arch-s3c2410/audio.h +++ /dev/null @@ -1,45 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/audio.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Ben Dooks - * - * S3C24XX - Audio platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_AUDIO_H -#define __ASM_ARCH_AUDIO_H __FILE__ - -/* struct s3c24xx_iis_ops - * - * called from the s3c24xx audio core to deal with the architecture - * or the codec's setup and control. - * - * the pointer to itself is passed through in case the caller wants to - * embed this in an larger structure for easy reference to it's context. -*/ - -struct s3c24xx_iis_ops { - struct module *owner; - - int (*startup)(struct s3c24xx_iis_ops *me); - void (*shutdown)(struct s3c24xx_iis_ops *me); - int (*suspend)(struct s3c24xx_iis_ops *me); - int (*resume)(struct s3c24xx_iis_ops *me); - - int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); - int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); - int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt); -}; - -struct s3c24xx_platdata_iis { - const char *codec_clk; - struct s3c24xx_iis_ops *ops; - int (*match_dev)(struct device *dev); -}; - -#endif /* __ASM_ARCH_AUDIO_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h deleted file mode 100644 index 034d2c5a47c..00000000000 --- a/include/asm-arm/arch-s3c2410/bast-cpld.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * BAST - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTCPLD_H -#define __ASM_ARCH_BASTCPLD_H - -/* CTRL1 - Audio LR routing */ - -#define BAST_CPLD_CTRL1_LRCOFF (0x00) -#define BAST_CPLD_CTRL1_LRCADC (0x01) -#define BAST_CPLD_CTRL1_LRCDAC (0x02) -#define BAST_CPLD_CTRL1_LRCARM (0x03) -#define BAST_CPLD_CTRL1_LRMASK (0x03) - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define BAST_CPLD_CTRL2_WNAND (0x04) -#define BAST_CPLD_CTLR2_IDERST (0x08) - -/* CTRL3 - rom write control, CPLD identity */ - -#define BAST_CPLD_CTRL3_IDMASK (0x0e) -#define BAST_CPLD_CTRL3_ROMWEN (0x01) - -/* CTRL4 - 8bit LCD interface control/status */ - -#define BAST_CPLD_CTRL4_LLAT (0x01) -#define BAST_CPLD_CTRL4_LCDRW (0x02) -#define BAST_CPLD_CTRL4_LCDCMD (0x04) -#define BAST_CPLD_CTRL4_LCDE2 (0x01) - -/* CTRL5 - DMA routing */ - -#define BAST_CPLD_DMA0_PRIIDE (0<<0) -#define BAST_CPLD_DMA0_SECIDE (1<<0) -#define BAST_CPLD_DMA0_ISA15 (2<<0) -#define BAST_CPLD_DMA0_ISA36 (3<<0) - -#define BAST_CPLD_DMA1_PRIIDE (0<<2) -#define BAST_CPLD_DMA1_SECIDE (1<<2) -#define BAST_CPLD_DMA1_ISA15 (2<<2) -#define BAST_CPLD_DMA1_ISA36 (3<<2) - -#endif /* __ASM_ARCH_BASTCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h deleted file mode 100644 index 726c0466f85..00000000000 --- a/include/asm-arm/arch-s3c2410/bast-irq.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-irq.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * Machine BAST - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTIRQ_H -#define __ASM_ARCH_BASTIRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT18 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_PCSERIAL1 IRQ_EINT15 -#define IRQ_PCSERIAL2 IRQ_EINT14 -#define IRQ_PCPARALLEL IRQ_EINT13 -#define IRQ_ASIX IRQ_EINT11 -#define IRQ_DM9000 IRQ_EINT10 -#define IRQ_ISA IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_BASTIRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h deleted file mode 100644 index 86ac1c108db..00000000000 --- a/include/asm-arm/arch-s3c2410/bast-map.h +++ /dev/null @@ -1,146 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-map.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * Machine BAST - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_BASTMAP_H -#define __ASM_ARCH_BASTMAP_H - -#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */ -#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */ -#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */ -#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */ -#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) - -#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) - -#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) - -#define BAST_PA_LCD_RCMD1 (0x8800000) -#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) - -#define BAST_PA_LCD_WCMD1 (0x8000000) -#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) - -#define BAST_PA_LCD_RDATA1 (0x9800000) -#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) - -#define BAST_PA_LCD_WDATA1 (0x9000000) -#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) - -#define BAST_PA_LCD_RCMD2 (0xA800000) -#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) - -#define BAST_PA_LCD_WCMD2 (0xA000000) -#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) - -#define BAST_PA_LCD_RDATA2 (0xB800000) -#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) - -#define BAST_PA_LCD_WDATA2 (0xB000000) -#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) - - -/* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x00000000 to 0x01000000 16MB ISA IO space - * 0x01000000 to 0x02000000 16MB ISA memory space - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02400000 to 0x02500000 1MB ASIX ethernet controller - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller - * 0x02600000 to 0x02700000 1MB PC SuperIO controller - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) -#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) -#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) -#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) -#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) -#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) -#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) -#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) -#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VAM_CS2 (0x00000000) -#define BAST_VAM_CS3 (0x04000000) -#define BAST_VAM_CS4 (0x08000000) -#define BAST_VAM_CS5 (0x0C000000) - -/* physical offset addresses for the peripherals */ - -#define BAST_PA_ISAIO (0x00000000) -#define BAST_PA_ASIXNET (0x01000000) -#define BAST_PA_SUPERIO (0x01800000) -#define BAST_PA_IDEPRI (0x02000000) -#define BAST_PA_IDEPRIAUX (0x02800000) -#define BAST_PA_IDESEC (0x03000000) -#define BAST_PA_IDESECAUX (0x03800000) -#define BAST_PA_ISAMEM (0x04000000) -#define BAST_PA_DM9000 (0x05000000) - -/* some configurations for the peripherals */ - -#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) -/* */ - -#define BAST_ASIXNET_CS BAST_VAM_CS5 -#define BAST_IDE_CS BAST_VAM_CS5 -#define BAST_DM9000_CS BAST_VAM_CS4 - -#endif /* __ASM_ARCH_BASTMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h deleted file mode 100644 index 37a11fe54a7..00000000000 --- a/include/asm-arm/arch-s3c2410/bast-pmu.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * Vincent Sanders - * - * Machine BAST - Power Management chip - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTPMU_H -#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" - -#define BASTPMU_REG_IDENT (0x00) -#define BASTPMU_REG_VERSION (0x01) -#define BASTPMU_REG_DDCCTRL (0x02) -#define BASTPMU_REG_POWER (0x03) -#define BASTPMU_REG_RESET (0x04) -#define BASTPMU_REG_GWO (0x05) -#define BASTPMU_REG_WOL (0x06) -#define BASTPMU_REG_WOR (0x07) -#define BASTPMU_REG_UID (0x09) - -#define BASTPMU_EEPROM (0xC0) - -#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) -#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) -#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) - -#define BASTPMU_IDENT_0 0x53 -#define BASTPMU_IDENT_1 0x42 -#define BASTPMU_IDENT_2 0x50 -#define BASTPMU_IDENT_3 0x4d - -#define BASTPMU_RESET_GUARD (0x55) - -#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S deleted file mode 100644 index 89076c32272..00000000000 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - -#define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx -#endif - -/* include the reset of the code which will do the work */ - -#include diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h deleted file mode 100644 index 86eaa0c2dc1..00000000000 --- a/include/asm-arm/arch-s3c2410/dma.h +++ /dev/null @@ -1,453 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/dma.h - * - * Copyright (C) 2003,2004,2006 Simtec Electronics - * Ben Dooks - * - * Samsung S3C241XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H __FILE__ - -#include -#include - -/* - * This is the maximum DMA address(physical address) that can be DMAd to. - * - */ -#define MAX_DMA_ADDRESS 0x40000000 -#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ - -/* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) - * can be attached to any DMA source. We therefore let the DMA core handle - * the allocation of hardware channels to clients. -*/ - -enum dma_ch { - DMACH_XD0, - DMACH_XD1, - DMACH_SDI, - DMACH_SPI0, - DMACH_SPI1, - DMACH_UART0, - DMACH_UART1, - DMACH_UART2, - DMACH_TIMER, - DMACH_I2S_IN, - DMACH_I2S_OUT, - DMACH_PCM_IN, - DMACH_PCM_OUT, - DMACH_MIC_IN, - DMACH_USB_EP1, - DMACH_USB_EP2, - DMACH_USB_EP3, - DMACH_USB_EP4, - DMACH_UART0_SRC2, /* s3c2412 second uart sources */ - DMACH_UART1_SRC2, - DMACH_UART2_SRC2, - DMACH_UART3, /* s3c2443 has extra uart */ - DMACH_UART3_SRC2, - DMACH_MAX, /* the end entry */ -}; - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -/* we have 4 dma channels */ -#ifndef CONFIG_CPU_S3C2443 -#define S3C2410_DMA_CHANNELS (4) -#else -#define S3C2410_DMA_CHANNELS (6) -#endif - -/* types */ - -enum s3c2410_dma_state { - S3C2410_DMA_IDLE, - S3C2410_DMA_RUNNING, - S3C2410_DMA_PAUSED -}; - - -/* enum s3c2410_dma_loadst - * - * This represents the state of the DMA engine, wrt to the loaded / running - * transfers. Since we don't have any way of knowing exactly the state of - * the DMA transfers, we need to know the state to make decisions on wether - * we can - * - * S3C2410_DMA_NONE - * - * There are no buffers loaded (the channel should be inactive) - * - * S3C2410_DMA_1LOADED - * - * There is one buffer loaded, however it has not been confirmed to be - * loaded by the DMA engine. This may be because the channel is not - * yet running, or the DMA driver decided that it was too costly to - * sit and wait for it to happen. - * - * S3C2410_DMA_1RUNNING - * - * The buffer has been confirmed running, and not finisged - * - * S3C2410_DMA_1LOADED_1RUNNING - * - * There is a buffer waiting to be loaded by the DMA engine, and one - * currently running. -*/ - -enum s3c2410_dma_loadst { - S3C2410_DMALOAD_NONE, - S3C2410_DMALOAD_1LOADED, - S3C2410_DMALOAD_1RUNNING, - S3C2410_DMALOAD_1LOADED_1RUNNING, -}; - -enum s3c2410_dma_buffresult { - S3C2410_RES_OK, - S3C2410_RES_ERR, - S3C2410_RES_ABORT -}; - -enum s3c2410_dmasrc { - S3C2410_DMASRC_HW, /* source is memory */ - S3C2410_DMASRC_MEM /* source is hardware */ -}; - -/* enum s3c2410_chan_op - * - * operation codes passed to the DMA code by the user, and also used - * to inform the current channel owner of any changes to the system state -*/ - -enum s3c2410_chan_op { - S3C2410_DMAOP_START, - S3C2410_DMAOP_STOP, - S3C2410_DMAOP_PAUSE, - S3C2410_DMAOP_RESUME, - S3C2410_DMAOP_FLUSH, - S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ - S3C2410_DMAOP_STARTED, /* indicate channel started */ -}; - -/* flags */ - -#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about - * waiting for reloads */ -#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ - -/* dma buffer */ - -struct s3c2410_dma_client { - char *name; -}; - -/* s3c2410_dma_buf_s - * - * internally used buffer structure to describe a queued or running - * buffer. -*/ - -struct s3c2410_dma_buf; -struct s3c2410_dma_buf { - struct s3c2410_dma_buf *next; - int magic; /* magic */ - int size; /* buffer size in bytes */ - dma_addr_t data; /* start of DMA data */ - dma_addr_t ptr; /* where the DMA got to [1] */ - void *id; /* client's id */ -}; - -/* [1] is this updated for both recv/send modes? */ - -struct s3c2410_dma_chan; - -/* s3c2410_dma_cbfn_t - * - * buffer callback routine type -*/ - -typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, - void *buf, int size, - enum s3c2410_dma_buffresult result); - -typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, - enum s3c2410_chan_op ); - -struct s3c2410_dma_stats { - unsigned long loads; - unsigned long timeout_longest; - unsigned long timeout_shortest; - unsigned long timeout_avg; - unsigned long timeout_failed; -}; - -struct s3c2410_dma_map; - -/* struct s3c2410_dma_chan - * - * full state information for each DMA channel -*/ - -struct s3c2410_dma_chan { - /* channel state flags and information */ - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char irq_claimed; /* irq claimed for channel */ - unsigned char irq_enabled; /* irq enabled for channel */ - unsigned char xfer_unit; /* size of an transfer */ - - /* channel state */ - - enum s3c2410_dma_state state; - enum s3c2410_dma_loadst load_state; - struct s3c2410_dma_client *client; - - /* channel configuration */ - enum s3c2410_dmasrc source; - unsigned long dev_addr; - unsigned long load_timeout; - unsigned int flags; /* channel flags */ - unsigned int hw_cfg; /* last hw config */ - - struct s3c24xx_dma_map *map; /* channel hw maps */ - - /* channel's hardware position and configuration */ - void __iomem *regs; /* channels registers */ - void __iomem *addr_reg; /* data address register */ - unsigned int irq; /* channel irq */ - unsigned long dcon; /* default value of DCON */ - - /* driver handles */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* stats gathering */ - struct s3c2410_dma_stats *stats; - struct s3c2410_dma_stats stats_store; - - /* buffer list and information */ - struct s3c2410_dma_buf *curr; /* current dma buffer */ - struct s3c2410_dma_buf *next; /* next buffer to load */ - struct s3c2410_dma_buf *end; /* end of queue */ - - /* system device */ - struct sys_device dev; -}; - -/* the currently allocated channel information */ -extern struct s3c2410_dma_chan s3c2410_chans[]; - -/* note, we don't really use dma_device_t at the moment */ -typedef unsigned long dma_device_t; - -/* functions --------------------------------------------------------------- */ - -/* s3c2410_dma_request - * - * request a dma channel exclusivley -*/ - -extern int s3c2410_dma_request(dmach_t channel, - struct s3c2410_dma_client *, void *dev); - - -/* s3c2410_dma_ctrl - * - * change the state of the dma channel -*/ - -extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op); - -/* s3c2410_dma_setflags - * - * set the channel's flags to a given state -*/ - -extern int s3c2410_dma_setflags(dmach_t channel, - unsigned int flags); - -/* s3c2410_dma_free - * - * free the dma channel (will also abort any outstanding operations) -*/ - -extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *); - -/* s3c2410_dma_enqueue - * - * place the given buffer onto the queue of operations for the channel. - * The buffer must be allocated from dma coherent memory, or the Dcache/WB - * drained before the buffer is given to the DMA system. -*/ - -extern int s3c2410_dma_enqueue(dmach_t channel, void *id, - dma_addr_t data, int size); - -/* s3c2410_dma_config - * - * configure the dma channel -*/ - -extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon); - -/* s3c2410_dma_devconfig - * - * configure the device we're talking to -*/ - -extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - int hwcfg, unsigned long devaddr); - -/* s3c2410_dma_getposition - * - * get the position that the dma transfer is currently at -*/ - -extern int s3c2410_dma_getposition(dmach_t channel, - dma_addr_t *src, dma_addr_t *dest); - -extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); - -/* DMA Register definitions */ - -#define S3C2410_DMA_DISRC (0x00) -#define S3C2410_DMA_DISRCC (0x04) -#define S3C2410_DMA_DIDST (0x08) -#define S3C2410_DMA_DIDSTC (0x0C) -#define S3C2410_DMA_DCON (0x10) -#define S3C2410_DMA_DSTAT (0x14) -#define S3C2410_DMA_DCSRC (0x18) -#define S3C2410_DMA_DCDST (0x1C) -#define S3C2410_DMA_DMASKTRIG (0x20) -#define S3C2412_DMA_DMAREQSEL (0x24) -#define S3C2443_DMA_DMAREQSEL (0x24) - -#define S3C2410_DISRCC_INC (1<<0) -#define S3C2410_DISRCC_APB (1<<1) - -#define S3C2410_DMASKTRIG_STOP (1<<2) -#define S3C2410_DMASKTRIG_ON (1<<1) -#define S3C2410_DMASKTRIG_SWTRIG (1<<0) - -#define S3C2410_DCON_DEMAND (0<<31) -#define S3C2410_DCON_HANDSHAKE (1<<31) -#define S3C2410_DCON_SYNC_PCLK (0<<30) -#define S3C2410_DCON_SYNC_HCLK (1<<30) - -#define S3C2410_DCON_INTREQ (1<<29) - -#define S3C2410_DCON_CH0_XDREQ0 (0<<24) -#define S3C2410_DCON_CH0_UART0 (1<<24) -#define S3C2410_DCON_CH0_SDI (2<<24) -#define S3C2410_DCON_CH0_TIMER (3<<24) -#define S3C2410_DCON_CH0_USBEP1 (4<<24) - -#define S3C2410_DCON_CH1_XDREQ1 (0<<24) -#define S3C2410_DCON_CH1_UART1 (1<<24) -#define S3C2410_DCON_CH1_I2SSDI (2<<24) -#define S3C2410_DCON_CH1_SPI (3<<24) -#define S3C2410_DCON_CH1_USBEP2 (4<<24) - -#define S3C2410_DCON_CH2_I2SSDO (0<<24) -#define S3C2410_DCON_CH2_I2SSDI (1<<24) -#define S3C2410_DCON_CH2_SDI (2<<24) -#define S3C2410_DCON_CH2_TIMER (3<<24) -#define S3C2410_DCON_CH2_USBEP3 (4<<24) - -#define S3C2410_DCON_CH3_UART2 (0<<24) -#define S3C2410_DCON_CH3_SDI (1<<24) -#define S3C2410_DCON_CH3_SPI (2<<24) -#define S3C2410_DCON_CH3_TIMER (3<<24) -#define S3C2410_DCON_CH3_USBEP4 (4<<24) - -#define S3C2410_DCON_SRCSHIFT (24) -#define S3C2410_DCON_SRCMASK (7<<24) - -#define S3C2410_DCON_BYTE (0<<20) -#define S3C2410_DCON_HALFWORD (1<<20) -#define S3C2410_DCON_WORD (2<<20) - -#define S3C2410_DCON_AUTORELOAD (0<<22) -#define S3C2410_DCON_NORELOAD (1<<22) -#define S3C2410_DCON_HWTRIG (1<<23) - -#ifdef CONFIG_CPU_S3C2440 -#define S3C2440_DIDSTC_CHKINT (1<<2) - -#define S3C2440_DCON_CH0_I2SSDO (5<<24) -#define S3C2440_DCON_CH0_PCMIN (6<<24) - -#define S3C2440_DCON_CH1_PCMOUT (5<<24) -#define S3C2440_DCON_CH1_SDI (6<<24) - -#define S3C2440_DCON_CH2_PCMIN (5<<24) -#define S3C2440_DCON_CH2_MICIN (6<<24) - -#define S3C2440_DCON_CH3_MICIN (5<<24) -#define S3C2440_DCON_CH3_PCMOUT (6<<24) -#endif - -#ifdef CONFIG_CPU_S3C2412 - -#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) - -#define S3C2412_DMAREQSEL_HW (1) - -#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) -#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) -#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) -#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) -#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) -#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) -#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) -#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) -#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) -#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) -#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) -#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) -#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) -#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) -#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) -#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) -#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) -#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) -#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) -#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) - -#endif - -#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) - -#define S3C2443_DMAREQSEL_HW (1) - -#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) -#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) -#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) -#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) -#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) -#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) -#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) -#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) -#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) -#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) -#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) -#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) -#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) -#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) -#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) -#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) -#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) -#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) -#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) -#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) -#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S deleted file mode 100644 index f70d051b267..00000000000 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-arm/arch-s3c2410/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include -#include - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [ \base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [ \base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm - - /* currently don't need an disable_fiq macro */ - - .macro disable_fiq - .endm diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h deleted file mode 100644 index 5d0262601a7..00000000000 --- a/include/asm-arm/arch-s3c2410/fb.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/fb.h - * - * Copyright (c) 2004 Arnaud Patard - * - * Inspired by pxafb.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_FB_H -#define __ASM_ARM_FB_H - -#include - -struct s3c2410fb_hw { - unsigned long lcdcon1; - unsigned long lcdcon2; - unsigned long lcdcon3; - unsigned long lcdcon4; - unsigned long lcdcon5; -}; - -/* LCD description */ -struct s3c2410fb_display { - /* LCD type */ - unsigned type; - - /* Screen size */ - unsigned short width; - unsigned short height; - - /* Screen info */ - unsigned short xres; - unsigned short yres; - unsigned short bpp; - - unsigned pixclock; /* pixclock in picoseconds */ - unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ - - /* lcd configuration registers */ - unsigned long lcdcon5; -}; - -struct s3c2410fb_mach_info { - - struct s3c2410fb_display *displays; /* attached diplays info */ - unsigned num_displays; /* number of defined displays */ - unsigned default_display; - - /* GPIOs */ - - unsigned long gpcup; - unsigned long gpcup_mask; - unsigned long gpccon; - unsigned long gpccon_mask; - unsigned long gpdup; - unsigned long gpdup_mask; - unsigned long gpdcon; - unsigned long gpdcon_mask; - - /* lpc3600 control register */ - unsigned long lpcsel; -}; - -extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); - -#endif /* __ASM_ARM_FB_H */ diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h deleted file mode 100644 index 18e10d2c35e..00000000000 --- a/include/asm-arm/arch-s3c2410/gpio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/gpio.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#include diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h deleted file mode 100644 index c3de5ab102e..00000000000 --- a/include/asm-arm/arch-s3c2410/h1940-latch.h +++ /dev/null @@ -1,64 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h - * - * Copyright (c) 2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * iPAQ H1940 series - latch definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_LATCH_H -#define __ASM_ARCH_H1940_LATCH_H - - -#ifndef __ASSEMBLY__ -#define H1940_LATCH ((void __force __iomem *)0xF8000000) -#else -#define H1940_LATCH 0xF8000000 -#endif - -#define H1940_PA_LATCH (S3C2410_CS2) - -/* SD layer latch */ - -#define H1940_LATCH_SDQ1 (1<<16) -#define H1940_LATCH_LCD_P1 (1<<17) -#define H1940_LATCH_LCD_P2 (1<<18) -#define H1940_LATCH_LCD_P3 (1<<19) -#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ -#define H1940_LATCH_LED_RED (1<<21) -#define H1940_LATCH_SDQ7 (1<<22) -#define H1940_LATCH_USB_DP (1<<23) - -/* CPU layer latch */ - -#define H1940_LATCH_UDA_POWER (1<<24) -#define H1940_LATCH_AUDIO_POWER (1<<25) -#define H1940_LATCH_SM803_ENABLE (1<<26) -#define H1940_LATCH_LCD_P4 (1<<27) -#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ -#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ -#define H1940_LATCH_LED_GREEN (1<<30) -#define H1940_LATCH_LED_FLASH (1<<31) - -/* default settings */ - -#define H1940_LATCH_DEFAULT \ - H1940_LATCH_LCD_P4 | \ - H1940_LATCH_SM803_ENABLE | \ - H1940_LATCH_SDQ1 | \ - H1940_LATCH_LCD_P1 | \ - H1940_LATCH_LCD_P2 | \ - H1940_LATCH_LCD_P3 | \ - H1940_LATCH_MAX1698_nSHUTDOWN | \ - H1940_LATCH_CPUQ5 - -/* control functions */ - -extern void h1940_latch_control(unsigned int clear, unsigned int set); - -#endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h deleted file mode 100644 index 6135592e60f..00000000000 --- a/include/asm-arm/arch-s3c2410/h1940.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/h1940.h - * - * Copyright 2006 Ben Dooks - * - * H1940 definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_H -#define __ASM_ARCH_H1940_H - -#define H1940_SUSPEND_CHECKSUM (0x30003ff8) -#define H1940_SUSPEND_RESUMEAT (0x30081000) -#define H1940_SUSPEND_CHECK (0x30080000) - -extern void h1940_pm_return(void); - -#endif /* __ASM_ARCH_H1940_H */ diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h deleted file mode 100644 index 6dd10be4314..00000000000 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ /dev/null @@ -1,137 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/hardware.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#ifndef __ASSEMBLY__ - -/* external functions for GPIO support - * - * These allow various different clients to access the same GPIO - * registers without conflicting. If your driver only owns the entire - * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. -*/ - -/* s3c2410_gpio_cfgpin - * - * set the configuration of the given pin to the value passed. - * - * eg: - * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0); - * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); -*/ - -extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); - -extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); - -/* s3c2410_gpio_getirq - * - * turn the given pin number into the corresponding IRQ number - * - * returns: - * < 0 = no interrupt for this pin - * >=0 = interrupt number for the pin -*/ - -extern int s3c2410_gpio_getirq(unsigned int pin); - -/* s3c2410_gpio_irq2pin - * - * turn the given irq number into the corresponding GPIO number - * - * returns: - * < 0 = no pin - * >=0 = gpio pin number -*/ - -extern int s3c2410_gpio_irq2pin(unsigned int irq); - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_gpio_getirq(unsigned int pin); - -#endif /* CONFIG_CPU_S3C2400 */ - -/* s3c2410_gpio_irqfilter - * - * set the irq filtering on the given pin - * - * on = 0 => disable filtering - * 1 => enable filtering - * - * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with - * width of filter (0 through 63) - * - * -*/ - -extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config); - -/* s3c2410_gpio_pullup - * - * configure the pull-up control on the given pin - * - * to = 1 => disable the pull-up - * 0 => enable the pull-up - * - * eg; - * - * s3c2410_gpio_pullup(S3C2410_GPB0, 0); - * s3c2410_gpio_pullup(S3C2410_GPE8, 0); -*/ - -extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - -/* s3c2410_gpio_getpull - * - * Read the state of the pull-up on a given pin - * - * return: - * < 0 => error code - * 0 => enabled - * 1 => disabled -*/ - -extern int s3c2410_gpio_getpull(unsigned int pin); - -extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); - -extern unsigned int s3c2410_gpio_getpin(unsigned int pin); - -extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); - -#ifdef CONFIG_CPU_S3C2440 - -extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); - -#endif /* CONFIG_CPU_S3C2440 */ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); - -#endif /* CONFIG_CPU_S3C2412 */ - -#endif /* __ASSEMBLY__ */ - -#include -#include - -/* machine specific hardware definitions should go after this */ - -/* currently here until moved into config (todo) */ -#define CONFIG_NO_MULTIWORD_IO - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h deleted file mode 100644 index eed450608f9..00000000000 --- a/include/asm-arm/arch-s3c2410/idle.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/idle.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU Idle controls -*/ - -#ifndef __ASM_ARCH_IDLE_H -#define __ASM_ARCH_IDLE_H __FILE__ - -/* This allows the over-ride of the default idle code, in case there - * is any other things to be done over idle (like DVS) -*/ - -extern void (*s3c24xx_idle)(void); - -extern void s3c24xx_default_idle(void); - -#endif /* __ASM_ARCH_IDLE_H */ diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h deleted file mode 100644 index 3756c993776..00000000000 --- a/include/asm-arm/arch-s3c2410/io.h +++ /dev/null @@ -1,218 +0,0 @@ -/* - * linux/include/asm-arm/arch-s3c2410/io.h - * from linux/include/asm-arm/arch-rpc/io.h - * - * Copyright (C) 1997 Russell King - * (C) 2003 Simtec Electronics -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28 - * and are translated to the start of IO. Note that all addresses are - * not shifted left! - */ - -#define __PORT_PCIO(x) ((x) < (1<<28)) - -#define PCIO_BASE (S3C24XX_VA_ISA_WORD) -#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE) -#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD) -#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD) -/* - * Dynamic IO functions - let the compiler - * optimize the expressions - */ - -#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \ -static inline void __out##fnsuffix (unsigned int val, unsigned int port) \ -{ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "cmp %2, #(1<<28)\n\t" \ - "mov %0, %2\n\t" \ - "addcc %0, %0, %3\n\t" \ - "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \ - : "=&r" (temp) \ - : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ - : "cc"); \ -} - - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "cmp %2, #(1<<28)\n\t" \ - "mov %0, %2\n\t" \ - "addcc %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__ioaddr (unsigned long port) -{ - return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port; -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) \ - DECLARE_DYN_OUT(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"h") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, #0] @ outbc" \ - : : "r" (value), "r" ((port))); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, #0] @ inbc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) { \ - if ((port) < 256 && (port) > -256) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ - else if ((port) > 0) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v), \ - "r" (PCIO_BASE + ((port) & ~0xff)), \ - "Jr" (((port) & 0xff))); \ - else \ - __asm__ __volatile__( \ - "strh %0, [%1, #0] @ outwc" \ - : : "r" (v), \ - "r" (PCIO_BASE + (port))); \ - } else \ - __asm__ __volatile__( \ - "strh %0, [%1, #0] @ outwc" \ - : : "r" (v), "r" ((port))); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) { \ - if ((port) < 256 && (port) > -256 ) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE), \ - "Jr" ((port))); \ - else if ((port) > 0) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE + ((port) & ~0xff)), \ - "Jr" (((port) & 0xff))); \ - else \ - __asm__ __volatile__( \ - "ldrh %0, [%1, #0] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE + ((port)))); \ - } else \ - __asm__ __volatile__( \ - "ldrh %0, [%1, #0] @ inwc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, #0] @ outlc" \ - : : "r" (v), "r" ((port))); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, #0] @ inlc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) -#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) __ioaddr((port)) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) -#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) -#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l) - -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - -#endif diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h deleted file mode 100644 index f5435d8c376..00000000000 --- a/include/asm-arm/arch-s3c2410/irqs.h +++ /dev/null @@ -1,166 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/irqs.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#ifndef __ASM_ARM_IRQ_H -#error "Do not include this directly, instead #include " -#endif - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - */ - -#define S3C2410_CPUIRQ_OFFSET (16) - -#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET) - -/* main cpu interrupts */ -#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */ -#define IRQ_EINT1 S3C2410_IRQ(1) -#define IRQ_EINT2 S3C2410_IRQ(2) -#define IRQ_EINT3 S3C2410_IRQ(3) -#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */ -#define IRQ_EINT8t23 S3C2410_IRQ(5) -#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */ -#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */ -#define IRQ_BATT_FLT S3C2410_IRQ(7) -#define IRQ_TICK S3C2410_IRQ(8) /* 24 */ -#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */ -#define IRQ_TIMER0 S3C2410_IRQ(10) -#define IRQ_TIMER1 S3C2410_IRQ(11) -#define IRQ_TIMER2 S3C2410_IRQ(12) -#define IRQ_TIMER3 S3C2410_IRQ(13) -#define IRQ_TIMER4 S3C2410_IRQ(14) -#define IRQ_UART2 S3C2410_IRQ(15) -#define IRQ_LCD S3C2410_IRQ(16) /* 32 */ -#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */ -#define IRQ_DMA1 S3C2410_IRQ(18) -#define IRQ_DMA2 S3C2410_IRQ(19) -#define IRQ_DMA3 S3C2410_IRQ(20) -#define IRQ_SDI S3C2410_IRQ(21) -#define IRQ_SPI0 S3C2410_IRQ(22) -#define IRQ_UART1 S3C2410_IRQ(23) -#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */ -#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */ -#define IRQ_USBD S3C2410_IRQ(25) -#define IRQ_USBH S3C2410_IRQ(26) -#define IRQ_IIC S3C2410_IRQ(27) -#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */ -#define IRQ_SPI1 S3C2410_IRQ(29) -#define IRQ_RTC S3C2410_IRQ(30) -#define IRQ_ADCPARENT S3C2410_IRQ(31) - -/* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) - - -#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) - -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) - -/* IRQs for the interal UARTs, and ADC - * these need to be ordered in number of appearance in the - * SUBSRC mask register -*/ - -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) - -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ -#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) -#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) - -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ -#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) -#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) - -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ -#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) -#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) - -#define IRQ_TC S3C2410_IRQSUB(9) -#define IRQ_ADC S3C2410_IRQSUB(10) - -/* extra irqs for s3c2412 */ - -#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21) - -#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) -#define IRQ_S3C2412_CF S3C2410_IRQSUB(14) - -/* extra irqs for s3c2440 */ - -#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ -#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */ -#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13) -#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14) - -/* irqs for s3c2443 */ - -#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ -#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */ -#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */ -#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ -#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ - -#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) -#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) -#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) -#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17) - -#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18) -#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19) -#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20) -#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21) -#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22) -#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23) - -/* UART3 */ -#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24) -#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25) -#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26) - -#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) -#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) - -#ifdef CONFIG_CPU_S3C2443 -#define NR_IRQS (IRQ_S3C2443_AC97+1) -#else -#define NR_IRQS (IRQ_S3C2440_AC97+1) -#endif - -/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ -#define FIQ_START IRQ_EINT0 - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h deleted file mode 100644 index 800846ebddb..00000000000 --- a/include/asm-arm/arch-s3c2410/leds-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX - LEDs GPIO connector - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_LEDSGPIO_H -#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h" - -#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ -#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ - -struct s3c24xx_led_platdata { - unsigned int gpio; - unsigned int flags; - - char *name; - char *def_trigger; -}; - -#endif /* __ASM_ARCH_LEDSGPIO_H */ diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h deleted file mode 100644 index b33ed3b05ef..00000000000 --- a/include/asm-arm/arch-s3c2410/map.h +++ /dev/null @@ -1,178 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/map.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H - -#include - -#define S3C2410_ADDR(x) S3C_ADDR(x) - -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* USB host controller */ -#define S3C2410_PA_USBHOST (0x49000000) -#define S3C24XX_SZ_USBHOST SZ_1M - -/* DMA controller */ -#define S3C2410_PA_DMA (0x4B000000) -#define S3C24XX_SZ_DMA SZ_1M - -/* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS -#define S3C2410_PA_CLKPWR (0x4C000000) -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* LCD controller */ -#define S3C2410_PA_LCD (0x4D000000) -#define S3C24XX_SZ_LCD SZ_1M - -/* NAND flash controller */ -#define S3C2410_PA_NAND (0x4E000000) -#define S3C24XX_SZ_NAND SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* IIC hardware controller */ -#define S3C2410_PA_IIC (0x54000000) -#define S3C24XX_SZ_IIC SZ_1M - -/* IIS controller */ -#define S3C2410_PA_IIS (0x55000000) -#define S3C24XX_SZ_IIS SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M - -/* RTC */ -#define S3C2410_PA_RTC (0x57000000) -#define S3C24XX_SZ_RTC SZ_1M - -/* ADC */ -#define S3C2410_PA_ADC (0x58000000) -#define S3C24XX_SZ_ADC SZ_1M - -/* SPI */ -#define S3C2410_PA_SPI (0x59000000) -#define S3C24XX_SZ_SPI SZ_1M - -/* SDI */ -#define S3C2410_PA_SDI (0x5A000000) -#define S3C24XX_SZ_SDI SZ_1M - -/* CAMIF */ -#define S3C2440_PA_CAMIF (0x4F000000) -#define S3C2440_SZ_CAMIF SZ_1M - -/* AC97 */ - -#define S3C2440_PA_AC97 (0x5B000000) -#define S3C2440_SZ_AC97 SZ_1M - -/* S3C2443 High-speed SD/MMC */ -#define S3C2443_PA_HSMMC (0x4A800000) -#define S3C2443_SZ_HSMMC (256) - -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - -/* physical addresses of all the chip-select areas */ - -#define S3C2410_CS0 (0x00000000) -#define S3C2410_CS1 (0x08000000) -#define S3C2410_CS2 (0x10000000) -#define S3C2410_CS3 (0x18000000) -#define S3C2410_CS4 (0x20000000) -#define S3C2410_CS5 (0x28000000) -#define S3C2410_CS6 (0x30000000) -#define S3C2410_CS7 (0x38000000) - -#define S3C2410_SDRAM_PA (S3C2410_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2410_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST -#define S3C24XX_PA_DMA S3C2410_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_UART S3C2410_PA_UART -#define S3C24XX_PA_TIMER S3C2410_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2410_PA_IIC -#define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO -#define S3C24XX_PA_RTC S3C2410_PA_RTC -#define S3C24XX_PA_ADC S3C2410_PA_ADC -#define S3C24XX_PA_SPI S3C2410_PA_SPI - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h deleted file mode 100644 index 533e2436e70..00000000000 --- a/include/asm-arm/arch-s3c2410/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/memory.h - * from linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x30000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h deleted file mode 100644 index 229ab2351db..00000000000 --- a/include/asm-arm/arch-s3c2410/osiris-cpld.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h - * - * Copyright 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * OSIRIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_OSIRISCPLD_H -#define __ASM_ARCH_OSIRISCPLD_H - -/* CTRL0 - NAND WP control */ - -#define OSIRIS_CTRL0_NANDSEL (0x3) -#define OSIRIS_CTRL0_BOOT_INT (1<<3) -#define OSIRIS_CTRL0_PCMCIA (1<<4) -#define OSIRIS_CTRL0_FIX8 (1<<5) -#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) -#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) - -#define OSIRIS_CTRL1_FIX8 (1<<0) - -#define OSIRIS_ID_REVMASK (0x7) - -#endif /* __ASM_ARCH_OSIRISCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h deleted file mode 100644 index b5c74d2b9aa..00000000000 --- a/include/asm-arm/arch-s3c2410/osiris-map.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/osiris-map.h - * - * (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * OSIRIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_OSIRISMAP_H -#define __ASM_ARCH_OSIRISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000)) - -#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000) -#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD) - -#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000) -#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23)) - -#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000) -#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000) -#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000) -#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23)) - -#endif /* __ASM_ARCH_OSIRISMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h deleted file mode 100644 index e40c9342985..00000000000 --- a/include/asm-arm/arch-s3c2410/otom-map.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/otom-map.h - * - * (c) 2005 Guillaume GOURAT / NexVision - * guillaume.gourat@nexvision.fr - * - * NexVision OTOM board memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x01300000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. - */ - -#ifndef __ASM_ARCH_OTOMMAP_H -#define __ASM_ARCH_OTOMMAP_H - -#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ -#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ - -/* physical offset addresses for the peripherals */ - -#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */ - -#endif /* __ASM_ARCH_OTOMMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h deleted file mode 100644 index 37661358b42..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ /dev/null @@ -1,197 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-clock.h - * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 clock register definitions -*/ - -#ifndef __ASM_ARM_REGS_CLOCK -#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $" - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s))) - -#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00) -#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) -#define S3C2410_UPLLCON S3C2410_CLKREG(0x08) -#define S3C2410_CLKCON S3C2410_CLKREG(0x0C) -#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10) -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - -#define S3C2410_CLKCON_IDLE (1<<2) -#define S3C2410_CLKCON_POWER (1<<3) -#define S3C2410_CLKCON_NAND (1<<4) -#define S3C2410_CLKCON_LCDC (1<<5) -#define S3C2410_CLKCON_USBH (1<<6) -#define S3C2410_CLKCON_USBD (1<<7) -#define S3C2410_CLKCON_PWMT (1<<8) -#define S3C2410_CLKCON_SDI (1<<9) -#define S3C2410_CLKCON_UART0 (1<<10) -#define S3C2410_CLKCON_UART1 (1<<11) -#define S3C2410_CLKCON_UART2 (1<<12) -#define S3C2410_CLKCON_GPIO (1<<13) -#define S3C2410_CLKCON_RTC (1<<14) -#define S3C2410_CLKCON_ADC (1<<15) -#define S3C2410_CLKCON_IIC (1<<16) -#define S3C2410_CLKCON_IIS (1<<17) -#define S3C2410_CLKCON_SPI (1<<18) - -#define S3C2410_PLLCON_MDIVSHIFT 12 -#define S3C2410_PLLCON_PDIVSHIFT 4 -#define S3C2410_PLLCON_SDIVSHIFT 0 -#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) -#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1) -#define S3C2410_PLLCON_SDIVMASK 3 - -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - -#define S3C2410_CLKDIVN_PDIVN (1<<0) -#define S3C2410_CLKDIVN_HDIVN (1<<1) - -#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) -#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) -#define S3C2410_CLKSLOW_SLOW (1<<4) -#define S3C2410_CLKSLOW_SLOWVAL(x) (x) -#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) - -#ifndef __ASSEMBLY__ - -#include - -static inline unsigned int -s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT; - - mdiv &= S3C2410_PLLCON_MDIVMASK; - pdiv &= S3C2410_PLLCON_PDIVMASK; - sdiv &= S3C2410_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#endif /* __ASSEMBLY__ */ - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -/* extra registers */ -#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) - -#define S3C2440_CLKCON_CAMERA (1<<19) -#define S3C2440_CLKCON_AC97 (1<<20) - -#define S3C2440_CLKDIVN_PDIVN (1<<0) -#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) -#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) -#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) -#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) -#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) -#define S3C2440_CLKDIVN_UCLK (1<<3) - -#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) -#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) -#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) -#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) -#define S3C2440_CAMDIVN_DVSEN (1<<12) - -#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) - -#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) - -#define S3C2412_OSCSET S3C2410_CLKREG(0x18) -#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C) - -#define S3C2412_PLLCON_OFF (1<<20) - -#define S3C2412_CLKDIVN_PDIVN (1<<2) -#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2412_CLKDIVN_ARMDIVN (1<<3) -#define S3C2412_CLKDIVN_DVSEN (1<<4) -#define S3C2412_CLKDIVN_HALFHCLK (1<<5) -#define S3C2412_CLKDIVN_USB48DIV (1<<6) -#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) -#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) -#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) -#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) -#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) -#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) - -#define S3C2412_CLKCON_WDT (1<<28) -#define S3C2412_CLKCON_SPI (1<<27) -#define S3C2412_CLKCON_IIS (1<<26) -#define S3C2412_CLKCON_IIC (1<<25) -#define S3C2412_CLKCON_ADC (1<<24) -#define S3C2412_CLKCON_RTC (1<<23) -#define S3C2412_CLKCON_GPIO (1<<22) -#define S3C2412_CLKCON_UART2 (1<<21) -#define S3C2412_CLKCON_UART1 (1<<20) -#define S3C2412_CLKCON_UART0 (1<<19) -#define S3C2412_CLKCON_SDI (1<<18) -#define S3C2412_CLKCON_PWMT (1<<17) -#define S3C2412_CLKCON_USBD (1<<16) -#define S3C2412_CLKCON_CAMCLK (1<<15) -#define S3C2412_CLKCON_UARTCLK (1<<14) -/* missing 13 */ -#define S3C2412_CLKCON_USB_HOST48 (1<<12) -#define S3C2412_CLKCON_USB_DEV48 (1<<11) -#define S3C2412_CLKCON_HCLKdiv2 (1<<10) -#define S3C2412_CLKCON_HCLKx2 (1<<9) -#define S3C2412_CLKCON_SDRAM (1<<8) -/* missing 7 */ -#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH -#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC -#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND -#define S3C2412_CLKCON_DMA3 (1<<3) -#define S3C2412_CLKCON_DMA2 (1<<2) -#define S3C2412_CLKCON_DMA1 (1<<1) -#define S3C2412_CLKCON_DMA0 (1<<0) - -/* clock sourec controls */ - -#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0) -#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0) -#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3) -#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4) -#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5) -#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8) -#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) -#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) -#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) -#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12) -#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14) - -#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ - -#endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h deleted file mode 100644 index 1235df70f34..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-dsc.h +++ /dev/null @@ -1,184 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440/S3C2412 Signal Drive Strength Control -*/ - - -#ifndef __ASM_ARCH_REGS_DSC_H -#define __ASM_ARCH_REGS_DSC_H "2440-dsc" - -#if defined(CONFIG_CPU_S3C2412) -#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) -#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) -#endif - -#if defined(CONFIG_CPU_S3C244X) - -#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) -#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) - -#define S3C2440_SELECT_DSC0 (0) -#define S3C2440_SELECT_DSC1 (1<<31) - -#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) - -#define S3C2440_DSC0_DISABLE (1<<31) - -#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) -#define S3C2440_DSC0_ADDR_12mA (0<<8) -#define S3C2440_DSC0_ADDR_10mA (1<<8) -#define S3C2440_DSC0_ADDR_8mA (2<<8) -#define S3C2440_DSC0_ADDR_6mA (3<<8) -#define S3C2440_DSC0_ADDR_MASK (3<<8) - -/* D24..D31 */ -#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) -#define S3C2440_DSC0_DATA3_12mA (0<<6) -#define S3C2440_DSC0_DATA3_10mA (1<<6) -#define S3C2440_DSC0_DATA3_8mA (2<<6) -#define S3C2440_DSC0_DATA3_6mA (3<<6) -#define S3C2440_DSC0_DATA3_MASK (3<<6) - -/* D16..D23 */ -#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) -#define S3C2440_DSC0_DATA2_12mA (0<<4) -#define S3C2440_DSC0_DATA2_10mA (1<<4) -#define S3C2440_DSC0_DATA2_8mA (2<<4) -#define S3C2440_DSC0_DATA2_6mA (3<<4) -#define S3C2440_DSC0_DATA2_MASK (3<<4) - -/* D8..D15 */ -#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) -#define S3C2440_DSC0_DATA1_12mA (0<<2) -#define S3C2440_DSC0_DATA1_10mA (1<<2) -#define S3C2440_DSC0_DATA1_8mA (2<<2) -#define S3C2440_DSC0_DATA1_6mA (3<<2) -#define S3C2440_DSC0_DATA1_MASK (3<<2) - -/* D0..D7 */ -#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) -#define S3C2440_DSC0_DATA0_12mA (0<<0) -#define S3C2440_DSC0_DATA0_10mA (1<<0) -#define S3C2440_DSC0_DATA0_8mA (2<<0) -#define S3C2440_DSC0_DATA0_6mA (3<<0) -#define S3C2440_DSC0_DATA0_MASK (3<<0) - -#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) -#define S3C2440_DSC1_SCK1_12mA (0<<28) -#define S3C2440_DSC1_SCK1_10mA (1<<28) -#define S3C2440_DSC1_SCK1_8mA (2<<28) -#define S3C2440_DSC1_SCK1_6mA (3<<28) -#define S3C2440_DSC1_SCK1_MASK (3<<28) - -#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) -#define S3C2440_DSC1_SCK0_12mA (0<<26) -#define S3C2440_DSC1_SCK0_10mA (1<<26) -#define S3C2440_DSC1_SCK0_8mA (2<<26) -#define S3C2440_DSC1_SCK0_6mA (3<<26) -#define S3C2440_DSC1_SCK0_MASK (3<<26) - -#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) -#define S3C2440_DSC1_SCKE_10mA (0<<24) -#define S3C2440_DSC1_SCKE_8mA (1<<24) -#define S3C2440_DSC1_SCKE_6mA (2<<24) -#define S3C2440_DSC1_SCKE_4mA (3<<24) -#define S3C2440_DSC1_SCKE_MASK (3<<24) - -/* SDRAM nRAS/nCAS */ -#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) -#define S3C2440_DSC1_SDR_10mA (0<<22) -#define S3C2440_DSC1_SDR_8mA (1<<22) -#define S3C2440_DSC1_SDR_6mA (2<<22) -#define S3C2440_DSC1_SDR_4mA (3<<22) -#define S3C2440_DSC1_SDR_MASK (3<<22) - -/* NAND Flash Controller */ -#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) -#define S3C2440_DSC1_NFC_10mA (0<<20) -#define S3C2440_DSC1_NFC_8mA (1<<20) -#define S3C2440_DSC1_NFC_6mA (2<<20) -#define S3C2440_DSC1_NFC_4mA (3<<20) -#define S3C2440_DSC1_NFC_MASK (3<<20) - -/* nBE[0..3] */ -#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) -#define S3C2440_DSC1_nBE_10mA (0<<18) -#define S3C2440_DSC1_nBE_8mA (1<<18) -#define S3C2440_DSC1_nBE_6mA (2<<18) -#define S3C2440_DSC1_nBE_4mA (3<<18) -#define S3C2440_DSC1_nBE_MASK (3<<18) - -#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) -#define S3C2440_DSC1_WOE_10mA (0<<16) -#define S3C2440_DSC1_WOE_8mA (1<<16) -#define S3C2440_DSC1_WOE_6mA (2<<16) -#define S3C2440_DSC1_WOE_4mA (3<<16) -#define S3C2440_DSC1_WOE_MASK (3<<16) - -#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) -#define S3C2440_DSC1_CS7_10mA (0<<14) -#define S3C2440_DSC1_CS7_8mA (1<<14) -#define S3C2440_DSC1_CS7_6mA (2<<14) -#define S3C2440_DSC1_CS7_4mA (3<<14) -#define S3C2440_DSC1_CS7_MASK (3<<14) - -#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) -#define S3C2440_DSC1_CS6_10mA (0<<12) -#define S3C2440_DSC1_CS6_8mA (1<<12) -#define S3C2440_DSC1_CS6_6mA (2<<12) -#define S3C2440_DSC1_CS6_4mA (3<<12) -#define S3C2440_DSC1_CS6_MASK (3<<12) - -#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) -#define S3C2440_DSC1_CS5_10mA (0<<10) -#define S3C2440_DSC1_CS5_8mA (1<<10) -#define S3C2440_DSC1_CS5_6mA (2<<10) -#define S3C2440_DSC1_CS5_4mA (3<<10) -#define S3C2440_DSC1_CS5_MASK (3<<10) - -#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) -#define S3C2440_DSC1_CS4_10mA (0<<8) -#define S3C2440_DSC1_CS4_8mA (1<<8) -#define S3C2440_DSC1_CS4_6mA (2<<8) -#define S3C2440_DSC1_CS4_4mA (3<<8) -#define S3C2440_DSC1_CS4_MASK (3<<8) - -#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) -#define S3C2440_DSC1_CS3_10mA (0<<6) -#define S3C2440_DSC1_CS3_8mA (1<<6) -#define S3C2440_DSC1_CS3_6mA (2<<6) -#define S3C2440_DSC1_CS3_4mA (3<<6) -#define S3C2440_DSC1_CS3_MASK (3<<6) - -#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) -#define S3C2440_DSC1_CS2_10mA (0<<4) -#define S3C2440_DSC1_CS2_8mA (1<<4) -#define S3C2440_DSC1_CS2_6mA (2<<4) -#define S3C2440_DSC1_CS2_4mA (3<<4) -#define S3C2440_DSC1_CS2_MASK (3<<4) - -#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) -#define S3C2440_DSC1_CS1_10mA (0<<2) -#define S3C2440_DSC1_CS1_8mA (1<<2) -#define S3C2440_DSC1_CS1_6mA (2<<2) -#define S3C2440_DSC1_CS1_4mA (3<<2) -#define S3C2440_DSC1_CS1_MASK (3<<2) - -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) -#define S3C2440_DSC1_CS0_10mA (0<<0) -#define S3C2440_DSC1_CS0_8mA (1<<0) -#define S3C2440_DSC1_CS0_6mA (2<<0) -#define S3C2440_DSC1_CS0_4mA (3<<0) -#define S3C2440_DSC1_CS0_MASK (3<<0) - -#endif /* CONFIG_CPU_S3C2440 */ - -#endif /* __ASM_ARCH_REGS_DSC_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h deleted file mode 100644 index 497dd06e2c9..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ /dev/null @@ -1,1163 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 GPIO register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $" - -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) - -#define S3C2410_GPIO_BANKA (32*0) -#define S3C2410_GPIO_BANKB (32*1) -#define S3C2410_GPIO_BANKC (32*2) -#define S3C2410_GPIO_BANKD (32*3) -#define S3C2410_GPIO_BANKE (32*4) -#define S3C2410_GPIO_BANKF (32*5) -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) - -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C2400_MISCCR -#else -#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) -#endif /* CONFIG_CPU_S3C2400 */ - - -/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */ - -#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32) -#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2)) -#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \ - (2 * (S3C2400_BANKNUM(pin)-2))) - -#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \ - S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \ - S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO) - - -#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO) -#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31) - -/* general configuration options */ - -#define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ -#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) -#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ -#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ -#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ - -/* register address for the GPIO registers. - * S3C24XX_GPIOREG2 is for the second set of registers in the - * GPIO which move between s3c2410 and s3c2412 type systems */ - -#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2) - - -/* configure GPIO ports A..G */ - -/* port A - S3C2410: 22bits, zero in bit X makes pin X output - * S3C2400: 18bits, zero in bit X makes pin X output - * 1 makes port special function, this is default -*/ -#define S3C2410_GPACON S3C2410_GPIOREG(0x00) -#define S3C2410_GPADAT S3C2410_GPIOREG(0x04) - -#define S3C2400_GPACON S3C2410_GPIOREG(0x00) -#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) - -#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0) -#define S3C2410_GPA0_OUT (0<<0) -#define S3C2410_GPA0_ADDR0 (1<<0) - -#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1) -#define S3C2410_GPA1_OUT (0<<1) -#define S3C2410_GPA1_ADDR16 (1<<1) - -#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2) -#define S3C2410_GPA2_OUT (0<<2) -#define S3C2410_GPA2_ADDR17 (1<<2) - -#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3) -#define S3C2410_GPA3_OUT (0<<3) -#define S3C2410_GPA3_ADDR18 (1<<3) - -#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4) -#define S3C2410_GPA4_OUT (0<<4) -#define S3C2410_GPA4_ADDR19 (1<<4) - -#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5) -#define S3C2410_GPA5_OUT (0<<5) -#define S3C2410_GPA5_ADDR20 (1<<5) - -#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6) -#define S3C2410_GPA6_OUT (0<<6) -#define S3C2410_GPA6_ADDR21 (1<<6) - -#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7) -#define S3C2410_GPA7_OUT (0<<7) -#define S3C2410_GPA7_ADDR22 (1<<7) - -#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8) -#define S3C2410_GPA8_OUT (0<<8) -#define S3C2410_GPA8_ADDR23 (1<<8) - -#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9) -#define S3C2410_GPA9_OUT (0<<9) -#define S3C2410_GPA9_ADDR24 (1<<9) - -#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10) -#define S3C2410_GPA10_OUT (0<<10) -#define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2400_GPA10_SCKE (1<<10) - -#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11) -#define S3C2410_GPA11_OUT (0<<11) -#define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2400_GPA11_nCAS0 (1<<11) - -#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12) -#define S3C2410_GPA12_OUT (0<<12) -#define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2400_GPA12_nCAS1 (1<<12) - -#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13) -#define S3C2410_GPA13_OUT (0<<13) -#define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2400_GPA13_nGCS1 (1<<13) - -#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14) -#define S3C2410_GPA14_OUT (0<<14) -#define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2400_GPA14_nGCS2 (1<<14) - -#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15) -#define S3C2410_GPA15_OUT (0<<15) -#define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2400_GPA15_nGCS3 (1<<15) - -#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16) -#define S3C2410_GPA16_OUT (0<<16) -#define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2400_GPA16_nGCS4 (1<<16) - -#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17) -#define S3C2410_GPA17_OUT (0<<17) -#define S3C2410_GPA17_CLE (1<<17) -#define S3C2400_GPA17_nGCS5 (1<<17) - -#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18) -#define S3C2410_GPA18_OUT (0<<18) -#define S3C2410_GPA18_ALE (1<<18) - -#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19) -#define S3C2410_GPA19_OUT (0<<19) -#define S3C2410_GPA19_nFWE (1<<19) - -#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20) -#define S3C2410_GPA20_OUT (0<<20) -#define S3C2410_GPA20_nFRE (1<<20) - -#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21) -#define S3C2410_GPA21_OUT (0<<21) -#define S3C2410_GPA21_nRSTOUT (1<<21) - -#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22) -#define S3C2410_GPA22_OUT (0<<22) -#define S3C2410_GPA22_nFCE (1<<22) - -/* 0x08 and 0x0c are reserved on S3C2410 */ - -/* S3C2410: - * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=special function, 11=reserved - - * S3C2400: - * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=data, 11=special function - - * bit 0,1 = pin 0, 2,3= pin 1... - * - * CPBUP = pull up resistor control, 1=disabled, 0=enabled -*/ - -#define S3C2410_GPBCON S3C2410_GPIOREG(0x10) -#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) -#define S3C2410_GPBUP S3C2410_GPIOREG(0x18) - -#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) -#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) -#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) - -/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ - -#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0) -#define S3C2410_GPB0_INP (0x00 << 0) -#define S3C2410_GPB0_OUTP (0x01 << 0) -#define S3C2410_GPB0_TOUT0 (0x02 << 0) -#define S3C2400_GPB0_DATA16 (0x02 << 0) - -#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1) -#define S3C2410_GPB1_INP (0x00 << 2) -#define S3C2410_GPB1_OUTP (0x01 << 2) -#define S3C2410_GPB1_TOUT1 (0x02 << 2) -#define S3C2400_GPB1_DATA17 (0x02 << 2) - -#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2) -#define S3C2410_GPB2_INP (0x00 << 4) -#define S3C2410_GPB2_OUTP (0x01 << 4) -#define S3C2410_GPB2_TOUT2 (0x02 << 4) -#define S3C2400_GPB2_DATA18 (0x02 << 4) -#define S3C2400_GPB2_TCLK1 (0x03 << 4) - -#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3) -#define S3C2410_GPB3_INP (0x00 << 6) -#define S3C2410_GPB3_OUTP (0x01 << 6) -#define S3C2410_GPB3_TOUT3 (0x02 << 6) -#define S3C2400_GPB3_DATA19 (0x02 << 6) -#define S3C2400_GPB3_TXD1 (0x03 << 6) - -#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4) -#define S3C2410_GPB4_INP (0x00 << 8) -#define S3C2410_GPB4_OUTP (0x01 << 8) -#define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2400_GPB4_DATA20 (0x02 << 8) -#define S3C2410_GPB4_MASK (0x03 << 8) -#define S3C2400_GPB4_RXD1 (0x03 << 8) -#define S3C2400_GPB4_MASK (0x03 << 8) - -#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5) -#define S3C2410_GPB5_INP (0x00 << 10) -#define S3C2410_GPB5_OUTP (0x01 << 10) -#define S3C2410_GPB5_nXBACK (0x02 << 10) -#define S3C2443_GPB5_XBACK (0x03 << 10) -#define S3C2400_GPB5_DATA21 (0x02 << 10) -#define S3C2400_GPB5_nCTS1 (0x03 << 10) - -#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6) -#define S3C2410_GPB6_INP (0x00 << 12) -#define S3C2410_GPB6_OUTP (0x01 << 12) -#define S3C2410_GPB6_nXBREQ (0x02 << 12) -#define S3C2443_GPB6_XBREQ (0x03 << 12) -#define S3C2400_GPB6_DATA22 (0x02 << 12) -#define S3C2400_GPB6_nRTS1 (0x03 << 12) - -#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7) -#define S3C2410_GPB7_INP (0x00 << 14) -#define S3C2410_GPB7_OUTP (0x01 << 14) -#define S3C2410_GPB7_nXDACK1 (0x02 << 14) -#define S3C2443_GPB7_XDACK1 (0x03 << 14) -#define S3C2400_GPB7_DATA23 (0x02 << 14) - -#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8) -#define S3C2410_GPB8_INP (0x00 << 16) -#define S3C2410_GPB8_OUTP (0x01 << 16) -#define S3C2410_GPB8_nXDREQ1 (0x02 << 16) -#define S3C2400_GPB8_DATA24 (0x02 << 16) - -#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9) -#define S3C2410_GPB9_INP (0x00 << 18) -#define S3C2410_GPB9_OUTP (0x01 << 18) -#define S3C2410_GPB9_nXDACK0 (0x02 << 18) -#define S3C2443_GPB9_XDACK0 (0x03 << 18) -#define S3C2400_GPB9_DATA25 (0x02 << 18) -#define S3C2400_GPB9_I2SSDI (0x03 << 18) - -#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10) -#define S3C2410_GPB10_INP (0x00 << 20) -#define S3C2410_GPB10_OUTP (0x01 << 20) -#define S3C2410_GPB10_nXDRE0 (0x02 << 20) -#define S3C2443_GPB10_XDREQ0 (0x03 << 20) -#define S3C2400_GPB10_DATA26 (0x02 << 20) -#define S3C2400_GPB10_nSS (0x03 << 20) - -#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11) -#define S3C2400_GPB11_INP (0x00 << 22) -#define S3C2400_GPB11_OUTP (0x01 << 22) -#define S3C2400_GPB11_DATA27 (0x02 << 22) - -#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12) -#define S3C2400_GPB12_INP (0x00 << 24) -#define S3C2400_GPB12_OUTP (0x01 << 24) -#define S3C2400_GPB12_DATA28 (0x02 << 24) - -#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13) -#define S3C2400_GPB13_INP (0x00 << 26) -#define S3C2400_GPB13_OUTP (0x01 << 26) -#define S3C2400_GPB13_DATA29 (0x02 << 26) - -#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14) -#define S3C2400_GPB14_INP (0x00 << 28) -#define S3C2400_GPB14_OUTP (0x01 << 28) -#define S3C2400_GPB14_DATA30 (0x02 << 28) - -#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15) -#define S3C2400_GPB15_INP (0x00 << 30) -#define S3C2400_GPB15_OUTP (0x01 << 30) -#define S3C2400_GPB15_DATA31 (0x02 << 30) - -#define S3C2410_GPB_PUPDIS(x) (1<<(x)) - -/* Port C consits of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's sync/etc. -*/ - -#define S3C2410_GPCCON S3C2410_GPIOREG(0x20) -#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) -#define S3C2410_GPCUP S3C2410_GPIOREG(0x28) - -#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) -#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) -#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) - -#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0) -#define S3C2410_GPC0_INP (0x00 << 0) -#define S3C2410_GPC0_OUTP (0x01 << 0) -#define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2400_GPC0_VD0 (0x02 << 0) - -#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1) -#define S3C2410_GPC1_INP (0x00 << 2) -#define S3C2410_GPC1_OUTP (0x01 << 2) -#define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2400_GPC1_VD1 (0x02 << 2) - -#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2) -#define S3C2410_GPC2_INP (0x00 << 4) -#define S3C2410_GPC2_OUTP (0x01 << 4) -#define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2400_GPC2_VD2 (0x02 << 4) - -#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3) -#define S3C2410_GPC3_INP (0x00 << 6) -#define S3C2410_GPC3_OUTP (0x01 << 6) -#define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2400_GPC3_VD3 (0x02 << 6) - -#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4) -#define S3C2410_GPC4_INP (0x00 << 8) -#define S3C2410_GPC4_OUTP (0x01 << 8) -#define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2400_GPC4_VD4 (0x02 << 8) - -#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5) -#define S3C2410_GPC5_INP (0x00 << 10) -#define S3C2410_GPC5_OUTP (0x01 << 10) -#define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2400_GPC5_VD5 (0x02 << 10) - -#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6) -#define S3C2410_GPC6_INP (0x00 << 12) -#define S3C2410_GPC6_OUTP (0x01 << 12) -#define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2400_GPC6_VD6 (0x02 << 12) - -#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7) -#define S3C2410_GPC7_INP (0x00 << 14) -#define S3C2410_GPC7_OUTP (0x01 << 14) -#define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2400_GPC7_VD7 (0x02 << 14) - -#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8) -#define S3C2410_GPC8_INP (0x00 << 16) -#define S3C2410_GPC8_OUTP (0x01 << 16) -#define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2400_GPC8_VD8 (0x02 << 16) - -#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9) -#define S3C2410_GPC9_INP (0x00 << 18) -#define S3C2410_GPC9_OUTP (0x01 << 18) -#define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2400_GPC9_VD9 (0x02 << 18) - -#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10) -#define S3C2410_GPC10_INP (0x00 << 20) -#define S3C2410_GPC10_OUTP (0x01 << 20) -#define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2400_GPC10_VD10 (0x02 << 20) - -#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11) -#define S3C2410_GPC11_INP (0x00 << 22) -#define S3C2410_GPC11_OUTP (0x01 << 22) -#define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2400_GPC11_VD11 (0x02 << 22) - -#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12) -#define S3C2410_GPC12_INP (0x00 << 24) -#define S3C2410_GPC12_OUTP (0x01 << 24) -#define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2400_GPC12_VD12 (0x02 << 24) - -#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13) -#define S3C2410_GPC13_INP (0x00 << 26) -#define S3C2410_GPC13_OUTP (0x01 << 26) -#define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2400_GPC13_VD13 (0x02 << 26) - -#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14) -#define S3C2410_GPC14_INP (0x00 << 28) -#define S3C2410_GPC14_OUTP (0x01 << 28) -#define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2400_GPC14_VD14 (0x02 << 28) - -#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15) -#define S3C2410_GPC15_INP (0x00 << 30) -#define S3C2410_GPC15_OUTP (0x01 << 30) -#define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2400_GPC15_VD15 (0x02 << 30) - -#define S3C2410_GPC_PUPDIS(x) (1<<(x)) - -/* - * S3C2410: Port D consists of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's data. - * - * S3C2400: Port D consists of 11 GPIO/Special function - * - * almost identical setup to port c -*/ - -#define S3C2410_GPDCON S3C2410_GPIOREG(0x30) -#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) -#define S3C2410_GPDUP S3C2410_GPIOREG(0x38) - -#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) -#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) -#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) - -#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0) -#define S3C2410_GPD0_INP (0x00 << 0) -#define S3C2410_GPD0_OUTP (0x01 << 0) -#define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2400_GPD0_VFRAME (0x02 << 0) -#define S3C2442_GPD0_nSPICS1 (0x03 << 0) - -#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) -#define S3C2410_GPD1_INP (0x00 << 2) -#define S3C2410_GPD1_OUTP (0x01 << 2) -#define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2400_GPD1_VM (0x02 << 2) -#define S3C2442_GPD1_SPICLK1 (0x03 << 2) - -#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) -#define S3C2410_GPD2_INP (0x00 << 4) -#define S3C2410_GPD2_OUTP (0x01 << 4) -#define S3C2410_GPD2_VD10 (0x02 << 4) -#define S3C2400_GPD2_VLINE (0x02 << 4) - -#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3) -#define S3C2410_GPD3_INP (0x00 << 6) -#define S3C2410_GPD3_OUTP (0x01 << 6) -#define S3C2410_GPD3_VD11 (0x02 << 6) -#define S3C2400_GPD3_VCLK (0x02 << 6) - -#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4) -#define S3C2410_GPD4_INP (0x00 << 8) -#define S3C2410_GPD4_OUTP (0x01 << 8) -#define S3C2410_GPD4_VD12 (0x02 << 8) -#define S3C2400_GPD4_LEND (0x02 << 8) - -#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5) -#define S3C2410_GPD5_INP (0x00 << 10) -#define S3C2410_GPD5_OUTP (0x01 << 10) -#define S3C2410_GPD5_VD13 (0x02 << 10) -#define S3C2400_GPD5_TOUT0 (0x02 << 10) - -#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6) -#define S3C2410_GPD6_INP (0x00 << 12) -#define S3C2410_GPD6_OUTP (0x01 << 12) -#define S3C2410_GPD6_VD14 (0x02 << 12) -#define S3C2400_GPD6_TOUT1 (0x02 << 12) - -#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7) -#define S3C2410_GPD7_INP (0x00 << 14) -#define S3C2410_GPD7_OUTP (0x01 << 14) -#define S3C2410_GPD7_VD15 (0x02 << 14) -#define S3C2400_GPD7_TOUT2 (0x02 << 14) - -#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8) -#define S3C2410_GPD8_INP (0x00 << 16) -#define S3C2410_GPD8_OUTP (0x01 << 16) -#define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2400_GPD8_TOUT3 (0x02 << 16) - -#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9) -#define S3C2410_GPD9_INP (0x00 << 18) -#define S3C2410_GPD9_OUTP (0x01 << 18) -#define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2400_GPD9_TCLK0 (0x02 << 18) -#define S3C2410_GPD9_MASK (0x03 << 18) - -#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10) -#define S3C2410_GPD10_INP (0x00 << 20) -#define S3C2410_GPD10_OUTP (0x01 << 20) -#define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2400_GPD10_nWAIT (0x02 << 20) - -#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11) -#define S3C2410_GPD11_INP (0x00 << 22) -#define S3C2410_GPD11_OUTP (0x01 << 22) -#define S3C2410_GPD11_VD19 (0x02 << 22) - -#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12) -#define S3C2410_GPD12_INP (0x00 << 24) -#define S3C2410_GPD12_OUTP (0x01 << 24) -#define S3C2410_GPD12_VD20 (0x02 << 24) - -#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13) -#define S3C2410_GPD13_INP (0x00 << 26) -#define S3C2410_GPD13_OUTP (0x01 << 26) -#define S3C2410_GPD13_VD21 (0x02 << 26) - -#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14) -#define S3C2410_GPD14_INP (0x00 << 28) -#define S3C2410_GPD14_OUTP (0x01 << 28) -#define S3C2410_GPD14_VD22 (0x02 << 28) -#define S3C2410_GPD14_nSS1 (0x03 << 28) - -#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) -#define S3C2410_GPD15_INP (0x00 << 30) -#define S3C2410_GPD15_OUTP (0x01 << 30) -#define S3C2410_GPD15_VD23 (0x02 << 30) -#define S3C2410_GPD15_nSS0 (0x03 << 30) - -#define S3C2410_GPD_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port E consists of 16 GPIO/Special function - * - * again, the same as port B, but dealing with I2S, SDI, and - * more miscellaneous functions - * - * S3C2400: - * Port E consists of 12 GPIO/Special function - * - * GPIO / interrupt inputs -*/ - -#define S3C2410_GPECON S3C2410_GPIOREG(0x40) -#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) -#define S3C2410_GPEUP S3C2410_GPIOREG(0x48) - -#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) -#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) -#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) - -#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0) -#define S3C2410_GPE0_INP (0x00 << 0) -#define S3C2410_GPE0_OUTP (0x01 << 0) -#define S3C2410_GPE0_I2SLRCK (0x02 << 0) -#define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2400_GPE0_EINT0 (0x02 << 0) -#define S3C2410_GPE0_MASK (0x03 << 0) - -#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1) -#define S3C2410_GPE1_INP (0x00 << 2) -#define S3C2410_GPE1_OUTP (0x01 << 2) -#define S3C2410_GPE1_I2SSCLK (0x02 << 2) -#define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2400_GPE1_EINT1 (0x02 << 2) -#define S3C2400_GPE1_nSS (0x03 << 2) -#define S3C2410_GPE1_MASK (0x03 << 2) - -#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2) -#define S3C2410_GPE2_INP (0x00 << 4) -#define S3C2410_GPE2_OUTP (0x01 << 4) -#define S3C2410_GPE2_CDCLK (0x02 << 4) -#define S3C2443_GPE2_AC_BITCLK (0x03 << 4) -#define S3C2400_GPE2_EINT2 (0x02 << 4) -#define S3C2400_GPE2_I2SSDI (0x03 << 4) - -#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3) -#define S3C2410_GPE3_INP (0x00 << 6) -#define S3C2410_GPE3_OUTP (0x01 << 6) -#define S3C2410_GPE3_I2SSDI (0x02 << 6) -#define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2400_GPE3_EINT3 (0x02 << 6) -#define S3C2400_GPE3_nCTS1 (0x03 << 6) -#define S3C2410_GPE3_nSS0 (0x03 << 6) -#define S3C2410_GPE3_MASK (0x03 << 6) - -#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4) -#define S3C2410_GPE4_INP (0x00 << 8) -#define S3C2410_GPE4_OUTP (0x01 << 8) -#define S3C2410_GPE4_I2SSDO (0x02 << 8) -#define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2400_GPE4_EINT4 (0x02 << 8) -#define S3C2400_GPE4_nRTS1 (0x03 << 8) -#define S3C2410_GPE4_I2SSDI (0x03 << 8) -#define S3C2410_GPE4_MASK (0x03 << 8) - -#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5) -#define S3C2410_GPE5_INP (0x00 << 10) -#define S3C2410_GPE5_OUTP (0x01 << 10) -#define S3C2410_GPE5_SDCLK (0x02 << 10) -#define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2400_GPE5_EINT5 (0x02 << 10) -#define S3C2400_GPE5_TCLK1 (0x03 << 10) - -#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6) -#define S3C2410_GPE6_INP (0x00 << 12) -#define S3C2410_GPE6_OUTP (0x01 << 12) -#define S3C2410_GPE6_SDCMD (0x02 << 12) -#define S3C2443_GPE6_SD1_CMD (0x02 << 12) -#define S3C2443_GPE6_AC_BITCLK (0x03 << 12) -#define S3C2400_GPE6_EINT6 (0x02 << 12) - -#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7) -#define S3C2410_GPE7_INP (0x00 << 14) -#define S3C2410_GPE7_OUTP (0x01 << 14) -#define S3C2410_GPE7_SDDAT0 (0x02 << 14) -#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) -#define S3C2443_GPE7_AC_SDI (0x03 << 14) -#define S3C2400_GPE7_EINT7 (0x02 << 14) - -#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8) -#define S3C2410_GPE8_INP (0x00 << 16) -#define S3C2410_GPE8_OUTP (0x01 << 16) -#define S3C2410_GPE8_SDDAT1 (0x02 << 16) -#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) -#define S3C2443_GPE8_AC_SDO (0x03 << 16) -#define S3C2400_GPE8_nXDACK0 (0x02 << 16) - -#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9) -#define S3C2410_GPE9_INP (0x00 << 18) -#define S3C2410_GPE9_OUTP (0x01 << 18) -#define S3C2410_GPE9_SDDAT2 (0x02 << 18) -#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) -#define S3C2443_GPE9_AC_SYNC (0x03 << 18) -#define S3C2400_GPE9_nXDACK1 (0x02 << 18) -#define S3C2400_GPE9_nXBACK (0x03 << 18) - -#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10) -#define S3C2410_GPE10_INP (0x00 << 20) -#define S3C2410_GPE10_OUTP (0x01 << 20) -#define S3C2410_GPE10_SDDAT3 (0x02 << 20) -#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) -#define S3C2443_GPE10_AC_nRESET (0x03 << 20) -#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) - -#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11) -#define S3C2410_GPE11_INP (0x00 << 22) -#define S3C2410_GPE11_OUTP (0x01 << 22) -#define S3C2410_GPE11_SPIMISO0 (0x02 << 22) -#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) -#define S3C2400_GPE11_nXBREQ (0x03 << 22) - -#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12) -#define S3C2410_GPE12_INP (0x00 << 24) -#define S3C2410_GPE12_OUTP (0x01 << 24) -#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) - -#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13) -#define S3C2410_GPE13_INP (0x00 << 26) -#define S3C2410_GPE13_OUTP (0x01 << 26) -#define S3C2410_GPE13_SPICLK0 (0x02 << 26) - -#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14) -#define S3C2410_GPE14_INP (0x00 << 28) -#define S3C2410_GPE14_OUTP (0x01 << 28) -#define S3C2410_GPE14_IICSCL (0x02 << 28) -#define S3C2410_GPE14_MASK (0x03 << 28) - -#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15) -#define S3C2410_GPE15_INP (0x00 << 30) -#define S3C2410_GPE15_OUTP (0x01 << 30) -#define S3C2410_GPE15_IICSDA (0x02 << 30) -#define S3C2410_GPE15_MASK (0x03 << 30) - -#define S3C2440_GPE0_ACSYNC (0x03 << 0) -#define S3C2440_GPE1_ACBITCLK (0x03 << 2) -#define S3C2440_GPE2_ACRESET (0x03 << 4) -#define S3C2440_GPE3_ACIN (0x03 << 6) -#define S3C2440_GPE4_ACOUT (0x03 << 8) - -#define S3C2410_GPE_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port F consists of 8 GPIO/Special function - * - * GPIO / interrupt inputs - * - * GPFCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined - * - * pull up works like all other ports. - * - * S3C2400: - * Port F consists of 7 GPIO/Special function - * - * GPIO/serial/misc pins -*/ - -#define S3C2410_GPFCON S3C2410_GPIOREG(0x50) -#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) -#define S3C2410_GPFUP S3C2410_GPIOREG(0x58) - -#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) -#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) -#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) - -#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0) -#define S3C2410_GPF0_INP (0x00 << 0) -#define S3C2410_GPF0_OUTP (0x01 << 0) -#define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2400_GPF0_RXD0 (0x02 << 0) - -#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1) -#define S3C2410_GPF1_INP (0x00 << 2) -#define S3C2410_GPF1_OUTP (0x01 << 2) -#define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2400_GPF1_RXD1 (0x02 << 2) -#define S3C2400_GPF1_IICSDA (0x03 << 2) - -#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2) -#define S3C2410_GPF2_INP (0x00 << 4) -#define S3C2410_GPF2_OUTP (0x01 << 4) -#define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2400_GPF2_TXD0 (0x02 << 4) - -#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3) -#define S3C2410_GPF3_INP (0x00 << 6) -#define S3C2410_GPF3_OUTP (0x01 << 6) -#define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2400_GPF3_TXD1 (0x02 << 6) -#define S3C2400_GPF3_IICSCL (0x03 << 6) - -#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4) -#define S3C2410_GPF4_INP (0x00 << 8) -#define S3C2410_GPF4_OUTP (0x01 << 8) -#define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2400_GPF4_nRTS0 (0x02 << 8) -#define S3C2400_GPF4_nXBACK (0x03 << 8) - -#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5) -#define S3C2410_GPF5_INP (0x00 << 10) -#define S3C2410_GPF5_OUTP (0x01 << 10) -#define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2400_GPF5_nCTS0 (0x02 << 10) -#define S3C2400_GPF5_nXBREQ (0x03 << 10) - -#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6) -#define S3C2410_GPF6_INP (0x00 << 12) -#define S3C2410_GPF6_OUTP (0x01 << 12) -#define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2400_GPF6_CLKOUT (0x02 << 12) - -#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7) -#define S3C2410_GPF7_INP (0x00 << 14) -#define S3C2410_GPF7_OUTP (0x01 << 14) -#define S3C2410_GPF7_EINT7 (0x02 << 14) - -#define S3C2410_GPF_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port G consists of 8 GPIO/IRQ/Special function - * - * GPGCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. - * - * S3C2400: - * Port G consists of 10 GPIO/Special function -*/ - -#define S3C2410_GPGCON S3C2410_GPIOREG(0x60) -#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) -#define S3C2410_GPGUP S3C2410_GPIOREG(0x68) - -#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) -#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) -#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) - -#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0) -#define S3C2410_GPG0_INP (0x00 << 0) -#define S3C2410_GPG0_OUTP (0x01 << 0) -#define S3C2410_GPG0_EINT8 (0x02 << 0) -#define S3C2400_GPG0_I2SLRCK (0x02 << 0) - -#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1) -#define S3C2410_GPG1_INP (0x00 << 2) -#define S3C2410_GPG1_OUTP (0x01 << 2) -#define S3C2410_GPG1_EINT9 (0x02 << 2) -#define S3C2400_GPG1_I2SSCLK (0x02 << 2) - -#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2) -#define S3C2410_GPG2_INP (0x00 << 4) -#define S3C2410_GPG2_OUTP (0x01 << 4) -#define S3C2410_GPG2_EINT10 (0x02 << 4) -#define S3C2410_GPG2_nSS0 (0x03 << 4) -#define S3C2400_GPG2_CDCLK (0x02 << 4) - -#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) -#define S3C2410_GPG3_INP (0x00 << 6) -#define S3C2410_GPG3_OUTP (0x01 << 6) -#define S3C2410_GPG3_EINT11 (0x02 << 6) -#define S3C2410_GPG3_nSS1 (0x03 << 6) -#define S3C2400_GPG3_I2SSDO (0x02 << 6) -#define S3C2400_GPG3_I2SSDI (0x03 << 6) - -#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4) -#define S3C2410_GPG4_INP (0x00 << 8) -#define S3C2410_GPG4_OUTP (0x01 << 8) -#define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2400_GPG4_MMCCLK (0x02 << 8) -#define S3C2400_GPG4_I2SSDI (0x03 << 8) -#define S3C2410_GPG4_LCDPWREN (0x03 << 8) -#define S3C2443_GPG4_LCDPWRDN (0x03 << 8) - -#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5) -#define S3C2410_GPG5_INP (0x00 << 10) -#define S3C2410_GPG5_OUTP (0x01 << 10) -#define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2400_GPG5_MMCCMD (0x02 << 10) -#define S3C2400_GPG5_IICSDA (0x03 << 10) -#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ - -#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6) -#define S3C2410_GPG6_INP (0x00 << 12) -#define S3C2410_GPG6_OUTP (0x01 << 12) -#define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2400_GPG6_MMCDAT (0x02 << 12) -#define S3C2400_GPG6_IICSCL (0x03 << 12) -#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) - -#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7) -#define S3C2410_GPG7_INP (0x00 << 14) -#define S3C2410_GPG7_OUTP (0x01 << 14) -#define S3C2410_GPG7_EINT15 (0x02 << 14) -#define S3C2410_GPG7_SPICLK1 (0x03 << 14) -#define S3C2400_GPG7_SPIMISO (0x02 << 14) -#define S3C2400_GPG7_IICSDA (0x03 << 14) - -#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8) -#define S3C2410_GPG8_INP (0x00 << 16) -#define S3C2410_GPG8_OUTP (0x01 << 16) -#define S3C2410_GPG8_EINT16 (0x02 << 16) -#define S3C2400_GPG8_SPIMOSI (0x02 << 16) -#define S3C2400_GPG8_IICSCL (0x03 << 16) - -#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9) -#define S3C2410_GPG9_INP (0x00 << 18) -#define S3C2410_GPG9_OUTP (0x01 << 18) -#define S3C2410_GPG9_EINT17 (0x02 << 18) -#define S3C2400_GPG9_SPICLK (0x02 << 18) -#define S3C2400_GPG9_MMCCLK (0x03 << 18) - -#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10) -#define S3C2410_GPG10_INP (0x00 << 20) -#define S3C2410_GPG10_OUTP (0x01 << 20) -#define S3C2410_GPG10_EINT18 (0x02 << 20) - -#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11) -#define S3C2410_GPG11_INP (0x00 << 22) -#define S3C2410_GPG11_OUTP (0x01 << 22) -#define S3C2410_GPG11_EINT19 (0x02 << 22) -#define S3C2410_GPG11_TCLK1 (0x03 << 22) -#define S3C2443_GPG11_CF_nIREQ (0x03 << 22) - -#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12) -#define S3C2410_GPG12_INP (0x00 << 24) -#define S3C2410_GPG12_OUTP (0x01 << 24) -#define S3C2410_GPG12_EINT20 (0x02 << 24) -#define S3C2410_GPG12_XMON (0x03 << 24) -#define S3C2442_GPG12_nSPICS0 (0x03 << 24) -#define S3C2443_GPG12_nINPACK (0x03 << 24) - -#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) -#define S3C2410_GPG13_INP (0x00 << 26) -#define S3C2410_GPG13_OUTP (0x01 << 26) -#define S3C2410_GPG13_EINT21 (0x02 << 26) -#define S3C2410_GPG13_nXPON (0x03 << 26) -#define S3C2443_GPG13_CF_nREG (0x03 << 26) - -#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14) -#define S3C2410_GPG14_INP (0x00 << 28) -#define S3C2410_GPG14_OUTP (0x01 << 28) -#define S3C2410_GPG14_EINT22 (0x02 << 28) -#define S3C2410_GPG14_YMON (0x03 << 28) -#define S3C2443_GPG14_CF_RESET (0x03 << 28) - -#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15) -#define S3C2410_GPG15_INP (0x00 << 30) -#define S3C2410_GPG15_OUTP (0x01 << 30) -#define S3C2410_GPG15_EINT23 (0x02 << 30) -#define S3C2410_GPG15_nYPON (0x03 << 30) -#define S3C2443_GPG15_CF_PWR (0x03 << 30) - -#define S3C2410_GPG_PUPDIS(x) (1<<(x)) - -/* Port H consists of11 GPIO/serial/Misc pins - * - * GPGCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. -*/ - -#define S3C2410_GPHCON S3C2410_GPIOREG(0x70) -#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74) -#define S3C2410_GPHUP S3C2410_GPIOREG(0x78) - -#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0) -#define S3C2410_GPH0_INP (0x00 << 0) -#define S3C2410_GPH0_OUTP (0x01 << 0) -#define S3C2410_GPH0_nCTS0 (0x02 << 0) - -#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1) -#define S3C2410_GPH1_INP (0x00 << 2) -#define S3C2410_GPH1_OUTP (0x01 << 2) -#define S3C2410_GPH1_nRTS0 (0x02 << 2) - -#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2) -#define S3C2410_GPH2_INP (0x00 << 4) -#define S3C2410_GPH2_OUTP (0x01 << 4) -#define S3C2410_GPH2_TXD0 (0x02 << 4) - -#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3) -#define S3C2410_GPH3_INP (0x00 << 6) -#define S3C2410_GPH3_OUTP (0x01 << 6) -#define S3C2410_GPH3_RXD0 (0x02 << 6) - -#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4) -#define S3C2410_GPH4_INP (0x00 << 8) -#define S3C2410_GPH4_OUTP (0x01 << 8) -#define S3C2410_GPH4_TXD1 (0x02 << 8) - -#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5) -#define S3C2410_GPH5_INP (0x00 << 10) -#define S3C2410_GPH5_OUTP (0x01 << 10) -#define S3C2410_GPH5_RXD1 (0x02 << 10) - -#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6) -#define S3C2410_GPH6_INP (0x00 << 12) -#define S3C2410_GPH6_OUTP (0x01 << 12) -#define S3C2410_GPH6_TXD2 (0x02 << 12) -#define S3C2410_GPH6_nRTS1 (0x03 << 12) - -#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7) -#define S3C2410_GPH7_INP (0x00 << 14) -#define S3C2410_GPH7_OUTP (0x01 << 14) -#define S3C2410_GPH7_RXD2 (0x02 << 14) -#define S3C2410_GPH7_nCTS1 (0x03 << 14) - -#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8) -#define S3C2410_GPH8_INP (0x00 << 16) -#define S3C2410_GPH8_OUTP (0x01 << 16) -#define S3C2410_GPH8_UCLK (0x02 << 16) - -#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9) -#define S3C2410_GPH9_INP (0x00 << 18) -#define S3C2410_GPH9_OUTP (0x01 << 18) -#define S3C2410_GPH9_CLKOUT0 (0x02 << 18) -#define S3C2442_GPH9_nSPICS0 (0x03 << 18) - -#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10) -#define S3C2410_GPH10_INP (0x00 << 20) -#define S3C2410_GPH10_OUTP (0x01 << 20) -#define S3C2410_GPH10_CLKOUT1 (0x02 << 20) - -/* The S3C2412 and S3C2413 move the GPJ register set to after - * GPH, which means all registers after 0x80 are now offset by 0x10 - * for the 2412/2413 from the 2410/2440/2442 -*/ - -/* miscellaneous control */ -#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) -#define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) - -/* see clock.h for dclk definitions */ - -/* pullup control on databus */ -#define S3C2410_MISCCR_SPUCR_HEN (0<<0) -#define S3C2410_MISCCR_SPUCR_HDIS (1<<0) -#define S3C2410_MISCCR_SPUCR_LEN (0<<1) -#define S3C2410_MISCCR_SPUCR_LDIS (1<<1) - -#define S3C2400_MISCCR_SPUCR_LEN (0<<0) -#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) -#define S3C2400_MISCCR_SPUCR_HEN (0<<1) -#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) - -#define S3C2400_MISCCR_HZ_STOPEN (0<<2) -#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) - -#define S3C2410_MISCCR_USBDEV (0<<3) -#define S3C2410_MISCCR_USBHOST (1<<3) - -#define S3C2410_MISCCR_CLK0_MPLL (0<<4) -#define S3C2410_MISCCR_CLK0_UPLL (1<<4) -#define S3C2410_MISCCR_CLK0_FCLK (2<<4) -#define S3C2410_MISCCR_CLK0_HCLK (3<<4) -#define S3C2410_MISCCR_CLK0_PCLK (4<<4) -#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) -#define S3C2410_MISCCR_CLK0_MASK (7<<4) - -#define S3C2412_MISCCR_CLK0_RTC (2<<4) - -#define S3C2410_MISCCR_CLK1_MPLL (0<<8) -#define S3C2410_MISCCR_CLK1_UPLL (1<<8) -#define S3C2410_MISCCR_CLK1_FCLK (2<<8) -#define S3C2410_MISCCR_CLK1_HCLK (3<<8) -#define S3C2410_MISCCR_CLK1_PCLK (4<<8) -#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) -#define S3C2410_MISCCR_CLK1_MASK (7<<8) - -#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) - -#define S3C2410_MISCCR_USBSUSPND0 (1<<12) -#define S3C2410_MISCCR_USBSUSPND1 (1<<13) - -#define S3C2410_MISCCR_nRSTCON (1<<16) - -#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) -#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ -#define S3C2410_MISCCR_SDSLEEP (7<<17) - -/* external interrupt control... */ -/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 - * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 - * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23 - * - * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23 - * - * Samsung datasheet p9-25 -*/ -#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) -#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) -#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) -#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) - -#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88) -#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) -#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) - -/* values for S3C2410_EXTINT0/1/2 */ -#define S3C2410_EXTINT_LOWLEV (0x00) -#define S3C2410_EXTINT_HILEV (0x01) -#define S3C2410_EXTINT_FALLEDGE (0x02) -#define S3C2410_EXTINT_RISEEDGE (0x04) -#define S3C2410_EXTINT_BOTHEDGE (0x06) - -/* interrupt filtering conrrol for EINT16..EINT23 */ -#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) -#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) -#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) -#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) - -#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94) -#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98) -#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C) -#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0) - -/* values for interrupt filtering */ -#define S3C2410_EINTFLT_PCLK (0x00) -#define S3C2410_EINTFLT_EXTCLK (1<<7) -#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f) - -/* removed EINTxxxx defs from here, not meant for this */ - -/* GSTATUS have miscellaneous information in them - * - * These move between s3c2410 and s3c2412 style systems. - */ - -#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) -#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0) -#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4) -#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) -#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) - -#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC) -#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0) -#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4) -#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8) -#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC) - -#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC) -#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0) -#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4) -#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8) -#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC) - -#define S3C2410_GSTATUS0_nWAIT (1<<3) -#define S3C2410_GSTATUS0_NCON (1<<2) -#define S3C2410_GSTATUS0_RnB (1<<1) -#define S3C2410_GSTATUS0_nBATTFLT (1<<0) - -#define S3C2410_GSTATUS1_IDMASK (0xffff0000) -#define S3C2410_GSTATUS1_2410 (0x32410000) -#define S3C2410_GSTATUS1_2412 (0x32412001) -#define S3C2410_GSTATUS1_2440 (0x32440000) -#define S3C2410_GSTATUS1_2442 (0x32440aaa) - -#define S3C2410_GSTATUS2_WTRESET (1<<2) -#define S3C2410_GSTATUS2_OFFRESET (1<<1) -#define S3C2410_GSTATUS2_PONRESET (1<<0) - -/* open drain control register */ -#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) - -#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) -#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) -#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) -#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) -#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) -#define S3C2400_OPENCR_OPC_CMDEN (1<<2) -#define S3C2400_OPENCR_OPC_DATDIS (0<<3) -#define S3C2400_OPENCR_OPC_DATEN (1<<3) -#define S3C2400_OPENCR_OPC_MISODIS (0<<4) -#define S3C2400_OPENCR_OPC_MISOEN (1<<4) -#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) -#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) - -/* 2412/2413 sleep configuration registers */ - -#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) -#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) -#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) -#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) -#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) -#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) - -/* definitions for each pin bit */ -#define S3C2412_GPIO_SLPCON_LOW ( 0x00 ) -#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 ) -#define S3C2412_GPIO_SLPCON_IN ( 0x02 ) -#define S3C2412_GPIO_SLPCON_PULL ( 0x03 ) - -#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) -#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2)) -#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) -#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2)) -#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */ -#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2)) - -#define S3C2412_SLPCON_ALL_LOW (0x0) -#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444) -#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888) -#define S3C2412_SLPCON_ALL_PULL (0x33333333) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h deleted file mode 100644 index 0362332faaf..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-gpioj.h +++ /dev/null @@ -1,106 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2440_GPIO_BANKJ (416) - -#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) -#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) -#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) -#define S3C2440_GPJ0_INP (0x00 << 0) -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) -#define S3C2440_GPJ1_INP (0x00 << 2) -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) -#define S3C2440_GPJ2_INP (0x00 << 4) -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) -#define S3C2440_GPJ3_INP (0x00 << 6) -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) -#define S3C2440_GPJ4_INP (0x00 << 8) -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) -#define S3C2440_GPJ5_INP (0x00 << 10) -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) -#define S3C2440_GPJ6_INP (0x00 << 12) -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) -#define S3C2440_GPJ7_INP (0x00 << 14) -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) -#define S3C2440_GPJ8_INP (0x00 << 16) -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) -#define S3C2440_GPJ9_INP (0x00 << 18) -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) -#define S3C2440_GPJ10_INP (0x00 << 20) -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) -#define S3C2440_GPJ11_INP (0x00 << 22) -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) -#define S3C2440_GPJ12_INP (0x00 << 24) -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) -#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) -#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h deleted file mode 100644 index 498184cb8ad..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-irq.h +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-irq.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_REGS_IRQ_H -#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $" - -/* interrupt controller */ - -#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) -#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) - -#define S3C2410_SRCPND S3C2410_IRQREG(0x000) -#define S3C2410_INTMOD S3C2410_IRQREG(0x004) -#define S3C2410_INTMSK S3C2410_IRQREG(0x008) -#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C) -#define S3C2410_INTPND S3C2410_IRQREG(0x010) -#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014) -#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) -#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) - -/* mask: 0=enable, 1=disable - * 1 bit EINT, 4=EINT4, 23=EINT23 - * EINT0,1,2,3 are not handled here. -*/ - -#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) -#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) -#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) -#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) - -#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) -#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) - -#endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h deleted file mode 100644 index bd854845697..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ /dev/null @@ -1,162 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_REGS_LCD_H -#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $" - -#define S3C2410_LCDREG(x) (x) - -/* LCD control registers */ -#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) -#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04) -#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08) -#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C) -#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10) - -#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8) -#define S3C2410_LCDCON1_MMODE (1<<7) -#define S3C2410_LCDCON1_DSCAN4 (0<<5) -#define S3C2410_LCDCON1_STN4 (1<<5) -#define S3C2410_LCDCON1_STN8 (2<<5) -#define S3C2410_LCDCON1_TFT (3<<5) - -#define S3C2410_LCDCON1_STN1BPP (0<<1) -#define S3C2410_LCDCON1_STN2GREY (1<<1) -#define S3C2410_LCDCON1_STN4GREY (2<<1) -#define S3C2410_LCDCON1_STN8BPP (3<<1) -#define S3C2410_LCDCON1_STN12BPP (4<<1) - -#define S3C2410_LCDCON1_TFT1BPP (8<<1) -#define S3C2410_LCDCON1_TFT2BPP (9<<1) -#define S3C2410_LCDCON1_TFT4BPP (10<<1) -#define S3C2410_LCDCON1_TFT8BPP (11<<1) -#define S3C2410_LCDCON1_TFT16BPP (12<<1) -#define S3C2410_LCDCON1_TFT24BPP (13<<1) - -#define S3C2410_LCDCON1_ENVID (1) - -#define S3C2410_LCDCON1_MODEMASK 0x1E - -#define S3C2410_LCDCON2_VBPD(x) ((x) << 24) -#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14) -#define S3C2410_LCDCON2_VFPD(x) ((x) << 6) -#define S3C2410_LCDCON2_VSPW(x) ((x) << 0) - -#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF) -#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF) -#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F) - -#define S3C2410_LCDCON3_HBPD(x) ((x) << 19) -#define S3C2410_LCDCON3_WDLY(x) ((x) << 19) -#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8) -#define S3C2410_LCDCON3_HFPD(x) ((x) << 0) -#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0) - -#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F) -#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF) - -/* LDCCON4 changes for STN mode on the S3C2412 */ - -#define S3C2410_LCDCON4_MVAL(x) ((x) << 8) -#define S3C2410_LCDCON4_HSPW(x) ((x) << 0) -#define S3C2410_LCDCON4_WLH(x) ((x) << 0) - -#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF) - -#define S3C2410_LCDCON5_BPP24BL (1<<12) -#define S3C2410_LCDCON5_FRM565 (1<<11) -#define S3C2410_LCDCON5_INVVCLK (1<<10) -#define S3C2410_LCDCON5_INVVLINE (1<<9) -#define S3C2410_LCDCON5_INVVFRAME (1<<8) -#define S3C2410_LCDCON5_INVVD (1<<7) -#define S3C2410_LCDCON5_INVVDEN (1<<6) -#define S3C2410_LCDCON5_INVPWREN (1<<5) -#define S3C2410_LCDCON5_INVLEND (1<<4) -#define S3C2410_LCDCON5_PWREN (1<<3) -#define S3C2410_LCDCON5_ENLEND (1<<2) -#define S3C2410_LCDCON5_BSWP (1<<1) -#define S3C2410_LCDCON5_HWSWP (1<<0) - -/* framebuffer start addressed */ -#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14) -#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18) -#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C) - -#define S3C2410_LCDBANK(x) ((x) << 21) -#define S3C2410_LCDBASEU(x) (x) - -#define S3C2410_OFFSIZE(x) ((x) << 11) -#define S3C2410_PAGEWIDTH(x) (x) - -/* colour lookup and miscellaneous controls */ - -#define S3C2410_REDLUT S3C2410_LCDREG(0x20) -#define S3C2410_GREENLUT S3C2410_LCDREG(0x24) -#define S3C2410_BLUELUT S3C2410_LCDREG(0x28) - -#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C) -#define S3C2410_TPAL S3C2410_LCDREG(0x50) - -#define S3C2410_TPAL_EN (1<<24) - -/* interrupt info */ -#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54) -#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58) -#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C) -#define S3C2410_LCDINT_FIWSEL (1<<2) -#define S3C2410_LCDINT_FRSYNC (1<<1) -#define S3C2410_LCDINT_FICNT (1<<0) - -/* s3c2442 extra stn registers */ - -#define S3C2442_REDLUT S3C2410_LCDREG(0x20) -#define S3C2442_GREENLUT S3C2410_LCDREG(0x24) -#define S3C2442_BLUELUT S3C2410_LCDREG(0x28) -#define S3C2442_DITHMODE S3C2410_LCDREG(0x20) - -#define S3C2410_LPCSEL S3C2410_LCDREG(0x60) - -#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) - -/* S3C2412 registers */ - -#define S3C2412_TPAL S3C2410_LCDREG(0x20) - -#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24) -#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28) -#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C) - -#define S3C2412_TCONSEL S3C2410_LCDREG(0x30) - -#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34) -#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38) -#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C) -#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40) - -#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4)) -#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4)) -#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4)) - -#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4)) - -/* general registers */ - -/* base of the LCD registers, where INTPND, INTSRC and then INTMSK - * are available. */ - -#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54) -#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24) - -#define S3C24XX_LCDINTPND (0x00) -#define S3C24XX_LCDSRCPND (0x04) -#define S3C24XX_LCDINTMSK (0x08) - -#endif /* ___ASM_ARCH_REGS_LCD_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h deleted file mode 100644 index 312ff93b63c..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-mem.h +++ /dev/null @@ -1,220 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-mem.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Memory Control register definitions -*/ - -#ifndef __ASM_ARM_MEMREGS_H -#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $" - -#ifndef S3C2410_MEMREG -#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -/* bus width, and wait state control */ -#define S3C2410_BWSCON S3C2410_MEMREG(0x0000) - -/* bank zero config - note, pinstrapped from OM pins! */ -#define S3C2410_BWSCON_DW0_16 (1<<1) -#define S3C2410_BWSCON_DW0_32 (2<<1) - -/* bank one configs */ -#define S3C2410_BWSCON_DW1_8 (0<<4) -#define S3C2410_BWSCON_DW1_16 (1<<4) -#define S3C2410_BWSCON_DW1_32 (2<<4) -#define S3C2410_BWSCON_WS1 (1<<6) -#define S3C2410_BWSCON_ST1 (1<<7) - -/* bank 2 configurations */ -#define S3C2410_BWSCON_DW2_8 (0<<8) -#define S3C2410_BWSCON_DW2_16 (1<<8) -#define S3C2410_BWSCON_DW2_32 (2<<8) -#define S3C2410_BWSCON_WS2 (1<<10) -#define S3C2410_BWSCON_ST2 (1<<11) - -/* bank 3 configurations */ -#define S3C2410_BWSCON_DW3_8 (0<<12) -#define S3C2410_BWSCON_DW3_16 (1<<12) -#define S3C2410_BWSCON_DW3_32 (2<<12) -#define S3C2410_BWSCON_WS3 (1<<14) -#define S3C2410_BWSCON_ST3 (1<<15) - -/* bank 4 configurations */ -#define S3C2410_BWSCON_DW4_8 (0<<16) -#define S3C2410_BWSCON_DW4_16 (1<<16) -#define S3C2410_BWSCON_DW4_32 (2<<16) -#define S3C2410_BWSCON_WS4 (1<<18) -#define S3C2410_BWSCON_ST4 (1<<19) - -/* bank 5 configurations */ -#define S3C2410_BWSCON_DW5_8 (0<<20) -#define S3C2410_BWSCON_DW5_16 (1<<20) -#define S3C2410_BWSCON_DW5_32 (2<<20) -#define S3C2410_BWSCON_WS5 (1<<22) -#define S3C2410_BWSCON_ST5 (1<<23) - -/* bank 6 configurations */ -#define S3C2410_BWSCON_DW6_8 (0<<24) -#define S3C2410_BWSCON_DW6_16 (1<<24) -#define S3C2410_BWSCON_DW6_32 (2<<24) -#define S3C2410_BWSCON_WS6 (1<<26) -#define S3C2410_BWSCON_ST6 (1<<27) - -/* bank 7 configurations */ -#define S3C2410_BWSCON_DW7_8 (0<<28) -#define S3C2410_BWSCON_DW7_16 (1<<28) -#define S3C2410_BWSCON_DW7_32 (2<<28) -#define S3C2410_BWSCON_WS7 (1<<30) -#define S3C2410_BWSCON_ST7 (1<<31) - -/* memory set (rom, ram) */ -#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) -#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) -#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C) -#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010) -#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014) -#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018) -#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C) -#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020) - -/* bank configuration registers */ - -#define S3C2410_BANKCON_PMCnorm (0x00) -#define S3C2410_BANKCON_PMC4 (0x01) -#define S3C2410_BANKCON_PMC8 (0x02) -#define S3C2410_BANKCON_PMC16 (0x03) - -/* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on - * the memory type bits */ - -#define S3C2410_BANKCON_Tacp2 (0x0 << 2) -#define S3C2410_BANKCON_Tacp3 (0x1 << 2) -#define S3C2410_BANKCON_Tacp4 (0x2 << 2) -#define S3C2410_BANKCON_Tacp6 (0x3 << 2) -#define S3C2410_BANKCON_Tacp_SHIFT (2) - -#define S3C2410_BANKCON_Tcah0 (0x0 << 4) -#define S3C2410_BANKCON_Tcah1 (0x1 << 4) -#define S3C2410_BANKCON_Tcah2 (0x2 << 4) -#define S3C2410_BANKCON_Tcah4 (0x3 << 4) -#define S3C2410_BANKCON_Tcah_SHIFT (4) - -#define S3C2410_BANKCON_Tcoh0 (0x0 << 6) -#define S3C2410_BANKCON_Tcoh1 (0x1 << 6) -#define S3C2410_BANKCON_Tcoh2 (0x2 << 6) -#define S3C2410_BANKCON_Tcoh4 (0x3 << 6) -#define S3C2410_BANKCON_Tcoh_SHIFT (6) - -#define S3C2410_BANKCON_Tacc1 (0x0 << 8) -#define S3C2410_BANKCON_Tacc2 (0x1 << 8) -#define S3C2410_BANKCON_Tacc3 (0x2 << 8) -#define S3C2410_BANKCON_Tacc4 (0x3 << 8) -#define S3C2410_BANKCON_Tacc6 (0x4 << 8) -#define S3C2410_BANKCON_Tacc8 (0x5 << 8) -#define S3C2410_BANKCON_Tacc10 (0x6 << 8) -#define S3C2410_BANKCON_Tacc14 (0x7 << 8) -#define S3C2410_BANKCON_Tacc_SHIFT (8) - -#define S3C2410_BANKCON_Tcos0 (0x0 << 11) -#define S3C2410_BANKCON_Tcos1 (0x1 << 11) -#define S3C2410_BANKCON_Tcos2 (0x2 << 11) -#define S3C2410_BANKCON_Tcos4 (0x3 << 11) -#define S3C2410_BANKCON_Tcos_SHIFT (11) - -#define S3C2410_BANKCON_Tacs0 (0x0 << 13) -#define S3C2410_BANKCON_Tacs1 (0x1 << 13) -#define S3C2410_BANKCON_Tacs2 (0x2 << 13) -#define S3C2410_BANKCON_Tacs4 (0x3 << 13) -#define S3C2410_BANKCON_Tacs_SHIFT (13) - -#define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2400_BANKCON_EDODRAM (0x2 << 15) -#define S3C2410_BANKCON_SDRAM (0x3 << 15) - -/* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) - -/* CAS pulse width */ -#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) -#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) - -/* CAS pre-charge */ -#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) -#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) - -/* control column address select */ -#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) -#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) -#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) -#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) - -/* next bits only for SDRAM in 6,7 */ -#define S3C2410_BANKCON_Trcd2 (0x00 << 2) -#define S3C2410_BANKCON_Trcd3 (0x01 << 2) -#define S3C2410_BANKCON_Trcd4 (0x02 << 2) - -/* control column address select */ -#define S3C2410_BANKCON_SCANb8 (0x00 << 0) -#define S3C2410_BANKCON_SCANb9 (0x01 << 0) -#define S3C2410_BANKCON_SCANb10 (0x02 << 0) - -#define S3C2410_REFRESH S3C2410_MEMREG(0x0024) -#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028) -#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C) -#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030) - -/* refresh control */ - -#define S3C2410_REFRESH_REFEN (1<<23) -#define S3C2410_REFRESH_SELF (1<<22) -#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1) - -#define S3C2410_REFRESH_TRP_MASK (3<<20) -#define S3C2410_REFRESH_TRP_2clk (0<<20) -#define S3C2410_REFRESH_TRP_3clk (1<<20) -#define S3C2410_REFRESH_TRP_4clk (2<<20) - -#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20) -#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20) -#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20) -#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20) - -#define S3C2410_REFRESH_TSRC_MASK (3<<18) -#define S3C2410_REFRESH_TSRC_4clk (0<<18) -#define S3C2410_REFRESH_TSRC_5clk (1<<18) -#define S3C2410_REFRESH_TSRC_6clk (2<<18) -#define S3C2410_REFRESH_TSRC_7clk (3<<18) - - -/* mode select register(s) */ - -#define S3C2410_MRSRB_CL1 (0x00 << 4) -#define S3C2410_MRSRB_CL2 (0x02 << 4) -#define S3C2410_MRSRB_CL3 (0x03 << 4) - -/* bank size register */ -#define S3C2410_BANKSIZE_128M (0x2 << 0) -#define S3C2410_BANKSIZE_64M (0x1 << 0) -#define S3C2410_BANKSIZE_32M (0x0 << 0) -#define S3C2410_BANKSIZE_16M (0x7 << 0) -#define S3C2410_BANKSIZE_8M (0x6 << 0) -#define S3C2410_BANKSIZE_4M (0x5 << 0) -#define S3C2410_BANKSIZE_2M (0x4 << 0) -#define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2400_BANKSIZE_MASK (0x4 << 0) -#define S3C2410_BANKSIZE_SCLK_EN (1<<4) -#define S3C2410_BANKSIZE_SCKE_EN (1<<5) -#define S3C2410_BANKSIZE_BURST (1<<7) - -#endif /* __ASM_ARM_MEMREGS_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h deleted file mode 100644 index 13d13b7cfe9..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-power.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-power.h - * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX power control register definitions -*/ - -#ifndef __ASM_ARM_REGS_PWR -#define __ASM_ARM_REGS_PWR __FILE__ - -#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) -#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) - -#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) -#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) -#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) -#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) - -#define S3C2412_PWRCFG_BATF_IRQ (1<<0) -#define S3C2412_PWRCFG_BATF_IGNORE (2<<0) -#define S3C2412_PWRCFG_BATF_SLEEP (3<<0) -#define S3C2412_PWRCFG_BATF_MASK (3<<0) - -#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6) -#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6) -#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6) -#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6) -#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6) - -#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8) -#define S3C2412_PWRCFG_NAND_NORST (1<<9) - -#endif /* __ASM_ARM_REGS_PWR */ diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h deleted file mode 100644 index c8c793e7893..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2412_MEM -#define __ASM_ARM_REGS_S3C2412_MEM - -#ifndef S3C2412_MEMREG -#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) -#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) -#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) -#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) - -#define S3C2412_REFRESH S3C2412_MEMREG(0x10) -#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) - -#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h deleted file mode 100644 index 783b18f5bce..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_H -#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" - -#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) -#define S3C2412_SWRST_RESET (0x533C2412) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2412_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h deleted file mode 100644 index c1414658d1c..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h +++ /dev/null @@ -1,195 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2443 clock register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2443_CLOCK -#define __ASM_ARM_REGS_S3C2443_CLOCK - -#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2443_PLLCON_MDIVSHIFT 16 -#define S3C2443_PLLCON_PDIVSHIFT 8 -#define S3C2443_PLLCON_SDIVSHIFT 0 -#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1) -#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1) -#define S3C2443_PLLCON_SDIVMASK (3) - -#define S3C2443_MPLLCON S3C2443_CLKREG(0x10) -#define S3C2443_EPLLCON S3C2443_CLKREG(0x18) -#define S3C2443_CLKSRC S3C2443_CLKREG(0x20) -#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24) -#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28) -#define S3C2443_HCLKCON S3C2443_CLKREG(0x30) -#define S3C2443_PCLKCON S3C2443_CLKREG(0x34) -#define S3C2443_SCLKCON S3C2443_CLKREG(0x38) -#define S3C2443_PWRMODE S3C2443_CLKREG(0x40) -#define S3C2443_SWRST S3C2443_CLKREG(0x44) -#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50) -#define S3C2443_SYSID S3C2443_CLKREG(0x5C) -#define S3C2443_PWRCFG S3C2443_CLKREG(0x60) -#define S3C2443_RSTCON S3C2443_CLKREG(0x64) - -#define S3C2443_SWRST_RESET (0x533c2443) - -#define S3C2443_PLLCON_OFF (1<<24) - -#define S3C2443_CLKSRC_I2S_EXT (1<<14) -#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14) -#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14) -#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14) -#define S3C2443_CLKSRC_I2S_MASK (3<<14) - -#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8) -#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8) -#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8) - -#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6) -#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4) -#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3) - -#define S3C2443_CLKDIV0_DVS (1<<13) -#define S3C2443_CLKDIV0_HALF_HCLK (1<<3) -#define S3C2443_CLKDIV0_HALF_PCLK (1<<2) - -#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0) - -#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6) -#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6) - -#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4) -#define S3C2443_CLKDIV0_PREDIV_SHIFT (4) - -#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9) -#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9) -#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9) -#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9) -#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9) -#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9) -#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9) -#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9) -#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9) -#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9) - -/* S3C2443_CLKDIV1 */ - -#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26) -#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26) - -#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24) -#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24) - -#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16) -#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16) - -#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12) -#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12) - -#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8) -#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8) - -#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6) -#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6) - -#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4) -#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4) - -#define S3C2443_CLKCON_NAND - -#define S3C2443_HCLKCON_DMA0 (1<<0) -#define S3C2443_HCLKCON_DMA1 (1<<1) -#define S3C2443_HCLKCON_DMA2 (1<<2) -#define S3C2443_HCLKCON_DMA3 (1<<3) -#define S3C2443_HCLKCON_DMA4 (1<<4) -#define S3C2443_HCLKCON_DMA5 (1<<5) -#define S3C2443_HCLKCON_CAMIF (1<<8) -#define S3C2443_HCLKCON_DISP (1<<9) -#define S3C2443_HCLKCON_LCDC (1<<10) -#define S3C2443_HCLKCON_USBH (1<<11) -#define S3C2443_HCLKCON_USBD (1<<12) -#define S3C2443_HCLKCON_HSMMC (1<<16) -#define S3C2443_HCLKCON_CFC (1<<17) -#define S3C2443_HCLKCON_SSMC (1<<18) -#define S3C2443_HCLKCON_DRAMC (1<<19) - -#define S3C2443_PCLKCON_UART0 (1<<0) -#define S3C2443_PCLKCON_UART1 (1<<1) -#define S3C2443_PCLKCON_UART2 (1<<2) -#define S3C2443_PCLKCON_UART3 (1<<3) -#define S3C2443_PCLKCON_IIC (1<<4) -#define S3C2443_PCLKCON_SDI (1<<5) -#define S3C2443_PCLKCON_ADC (1<<7) -#define S3C2443_PCLKCON_AC97 (1<<8) -#define S3C2443_PCLKCON_IIS (1<<9) -#define S3C2443_PCLKCON_PWMT (1<<10) -#define S3C2443_PCLKCON_WDT (1<<11) -#define S3C2443_PCLKCON_RTC (1<<12) -#define S3C2443_PCLKCON_GPIO (1<<13) -#define S3C2443_PCLKCON_SPI0 (1<<14) -#define S3C2443_PCLKCON_SPI1 (1<<15) - -#define S3C2443_SCLKCON_DDRCLK (1<<16) -#define S3C2443_SCLKCON_SSMCCLK (1<<15) -#define S3C2443_SCLKCON_HSSPICLK (1<<14) -#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13) -#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12) -#define S3C2443_SCLKCON_CAMCLK (1<<11) -#define S3C2443_SCLKCON_DISPCLK (1<<10) -#define S3C2443_SCLKCON_I2SCLK (1<<9) -#define S3C2443_SCLKCON_UARTCLK (1<<8) -#define S3C2443_SCLKCON_USBHOST (1<<1) - -#include - -static inline unsigned int -s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (2 * (mdiv + 8)); - do_div(fvco, pdiv << sdiv); - - return (unsigned int)fvco; -} - -static inline unsigned int -s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ - diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h deleted file mode 100644 index bfb222fa4ab..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-sdi.h +++ /dev/null @@ -1,127 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 MMC/SDIO register definitions -*/ - -#ifndef __ASM_ARM_REGS_SDI -#define __ASM_ARM_REGS_SDI "regs-sdi.h" - -#define S3C2410_SDICON (0x00) -#define S3C2410_SDIPRE (0x04) -#define S3C2410_SDICMDARG (0x08) -#define S3C2410_SDICMDCON (0x0C) -#define S3C2410_SDICMDSTAT (0x10) -#define S3C2410_SDIRSP0 (0x14) -#define S3C2410_SDIRSP1 (0x18) -#define S3C2410_SDIRSP2 (0x1C) -#define S3C2410_SDIRSP3 (0x20) -#define S3C2410_SDITIMER (0x24) -#define S3C2410_SDIBSIZE (0x28) -#define S3C2410_SDIDCON (0x2C) -#define S3C2410_SDIDCNT (0x30) -#define S3C2410_SDIDSTA (0x34) -#define S3C2410_SDIFSTA (0x38) - -#define S3C2410_SDIDATA (0x3C) -#define S3C2410_SDIIMSK (0x40) - -#define S3C2440_SDIDATA (0x40) -#define S3C2440_SDIIMSK (0x3C) - -#define S3C2440_SDICON_SDRESET (1<<8) -#define S3C2440_SDICON_MMCCLOCK (1<<5) -#define S3C2410_SDICON_BYTEORDER (1<<4) -#define S3C2410_SDICON_SDIOIRQ (1<<3) -#define S3C2410_SDICON_RWAITEN (1<<2) -#define S3C2410_SDICON_FIFORESET (1<<1) -#define S3C2410_SDICON_CLOCKTYPE (1<<0) - -#define S3C2410_SDICMDCON_ABORT (1<<12) -#define S3C2410_SDICMDCON_WITHDATA (1<<11) -#define S3C2410_SDICMDCON_LONGRSP (1<<10) -#define S3C2410_SDICMDCON_WAITRSP (1<<9) -#define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -#define S3C2410_SDICMDCON_INDEX (0x3f) - -#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -#define S3C2410_SDICMDSTAT_XFERING (1<<8) -#define S3C2410_SDICMDSTAT_INDEX (0xff) - -#define S3C2440_SDIDCON_DS_BYTE (0<<22) -#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -#define S3C2440_SDIDCON_DS_WORD (2<<22) -#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -#define S3C2410_SDIDCON_WIDEBUS (1<<16) -#define S3C2410_SDIDCON_DMAEN (1<<15) -#define S3C2410_SDIDCON_STOP (1<<14) -#define S3C2440_SDIDCON_DATSTART (1<<14) -#define S3C2410_SDIDCON_DATMODE (3<<12) -#define S3C2410_SDIDCON_BLKNUM (0x7ff) - -/* constants for S3C2410_SDIDCON_DATMODE */ -#define S3C2410_SDIDCON_XFER_READY (0<<12) -#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) - -#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) - -#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -#define S3C2410_SDIDSTA_TXDATAON (1<<1) -#define S3C2410_SDIDSTA_RXDATAON (1<<0) - -#define S3C2440_SDIFSTA_FIFORESET (1<<16) -#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -#define S3C2410_SDIFSTA_TFDET (1<<13) -#define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TFHALF (1<<11) -#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -#define S3C2410_SDIFSTA_RFLAST (1<<9) -#define S3C2410_SDIFSTA_RFFULL (1<<8) -#define S3C2410_SDIFSTA_RFHALF (1<<7) -#define S3C2410_SDIFSTA_COUNTMASK (0x7f) - -#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -#define S3C2410_SDIIMSK_CMDSENT (1<<16) -#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -#define S3C2410_SDIIMSK_READWAIT (1<<13) -#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -#define S3C2410_SDIIMSK_DATACRC (1<<9) -#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) - -#endif /* __ASM_ARM_REGS_SDI */ diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h deleted file mode 100644 index 4f866cdecab..00000000000 --- a/include/asm-arm/arch-s3c2410/reset.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/reset.h - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU reset controls -*/ - -#ifndef __ASM_ARCH_RESET_H -#define __ASM_ARCH_RESET_H __FILE__ - -/* This allows the over-ride of the default reset code -*/ - -extern void (*s3c24xx_reset_hook)(void); - -#endif /* __ASM_ARCH_RESET_H */ diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h deleted file mode 100644 index 73803731142..00000000000 --- a/include/asm-arm/arch-s3c2410/spi-gpio.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * S3C2410 - SPI Controller platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPIGPIO_H -#define __ASM_ARCH_SPIGPIO_H __FILE__ - -struct s3c2410_spigpio_info { - unsigned long pin_clk; - unsigned long pin_mosi; - unsigned long pin_miso; - - int bus_num; - - void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -}; - - -#endif /* __ASM_ARCH_SPIGPIO_H */ diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h deleted file mode 100644 index 442169887d3..00000000000 --- a/include/asm-arm/arch-s3c2410/spi.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/spi.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_H -#define __ASM_ARCH_SPI_H __FILE__ - -struct s3c2410_spi_info { - unsigned long pin_cs; /* simple gpio cs */ - unsigned int num_cs; /* total chipselects */ - int bus_num; /* bus number to use. */ - - void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); -}; - - -#endif /* __ASM_ARCH_SPI_H */ diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h deleted file mode 100644 index beeec770dcf..00000000000 --- a/include/asm-arm/arch-s3c2410/system-reset.h +++ /dev/null @@ -1,64 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/system-reset.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks - * - * S3C2410 - System define for arch_reset() function - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include - -#include -#include - -#include -#include - -extern void (*s3c24xx_reset_hook)(void); - -static void -arch_reset(char mode) -{ - struct clk *wdtclk; - - if (mode == 's') { - cpu_reset(0); - } - - if (s3c24xx_reset_hook) - s3c24xx_reset_hook(); - - printk("arch_reset: attempting watchdog reset\n"); - - __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); - - /* put initial values into count and data */ - __raw_writel(0x80, S3C2410_WTCNT); - __raw_writel(0x80, S3C2410_WTDAT); - - /* set the watchdog to go and reset... */ - __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); - - /* wait for reset to assert... */ - mdelay(500); - - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - - /* we'll take a jump through zero as a poor second */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h deleted file mode 100644 index 98f690e7d33..00000000000 --- a/include/asm-arm/arch-s3c2410/system.h +++ /dev/null @@ -1,58 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/system.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include - -#include -#include -#include - -#include - -void (*s3c24xx_idle)(void); -void (*s3c24xx_reset_hook)(void); - -void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) { - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - } - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static void arch_idle(void) -{ - if (s3c24xx_idle != NULL) - (s3c24xx_idle)(); - else - s3c24xx_default_idle(); -} - -#include diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h deleted file mode 100644 index c16a99c5a59..00000000000 --- a/include/asm-arm/arch-s3c2410/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - - -#define CLOCK_TICK_RATE 12000000 - - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h deleted file mode 100644 index 48a5731ee98..00000000000 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/uncompress.h - * - * Copyright (c) 2003, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -/* working in physical space... */ -#undef S3C2410_GPIOREG -#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) - -#include - -static inline int is_arm926(void) -{ - unsigned int cpuid; - - asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid)); - - return ((cpuid & 0xff0) == 0x260); -} - -static void arch_detect_cpu(void) -{ - unsigned int cpuid; - - cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); - cpuid &= S3C2410_GSTATUS1_IDMASK; - - if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442) { - fifo_mask = S3C2440_UFSTAT_TXMASK; - fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; - } else { - fifo_mask = S3C2410_UFSTAT_TXMASK; - fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT; - } -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h deleted file mode 100644 index 5bfa376e33d..00000000000 --- a/include/asm-arm/arch-s3c2410/usb-control.h +++ /dev/null @@ -1,41 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/usb-control.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks - * - * S3C2410 - usb port information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_USBCONTROL_H -#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h" - -#define S3C_HCDFLG_USED (1) - -struct s3c2410_hcd_port { - unsigned char flags; - unsigned char power; - unsigned char oc_status; - unsigned char oc_changed; -}; - -struct s3c2410_hcd_info { - struct usb_hcd *hcd; - struct s3c2410_hcd_port port[2]; - - void (*power_control)(int port, int to); - void (*enable_oc)(struct s3c2410_hcd_info *, int on); - void (*report_oc)(struct s3c2410_hcd_info *, int ports); -}; - -static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) -{ - if (info->report_oc != NULL) { - (info->report_oc)(info, ports); - } -} - -#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h deleted file mode 100644 index 0ae3bdb7e03..00000000000 --- a/include/asm-arm/arch-s3c2410/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vmalloc.h - * - * from linux/include/asm-arm/arch-iop3xx/vmalloc.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xE0000000) - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h deleted file mode 100644 index 0557b0a5ab1..00000000000 --- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * VR1000 - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000CPLD_H -#define __ASM_ARCH_VR1000CPLD_H - -#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ - -#endif /* __ASM_ARCH_VR1000CPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h deleted file mode 100644 index 890937083c6..00000000000 --- a/include/asm-arm/arch-s3c2410/vr1000-irq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * Machine VR1000 - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000IRQ_H -#define __ASM_ARCH_VR1000IRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT19 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_VR1000_SERIAL IRQ_EINT12 -#define IRQ_VR1000_DM9000A IRQ_EINT10 -#define IRQ_VR1000_DM9000N IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_VR1000IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h deleted file mode 100644 index 92a56a724a8..00000000000 --- a/include/asm-arm/arch-s3c2410/vr1000-map.h +++ /dev/null @@ -1,110 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * Machine VR1000 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_VR1000MAP_H -#define __ASM_ARCH_VR1000MAP_H - -#include - -#define VR1000_IOADDR(x) BAST_IOADDR(x) - -/* we put the CPLD registers next, to get them out of the way */ - -#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ -#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ -#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ -#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ -#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) - -#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) - -#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) - -/* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers - * 0x02600000 to 0x02700000 1MB - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define VR1000_VA_MULTISPACE (0xE0000000) - -#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) -#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) -#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) -#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) -#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) -#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) -#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) -#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) -#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) - -/* physical offset addresses for the peripherals */ - -#define VR1000_PA_IDEPRI (0x02000000) -#define VR1000_PA_IDEPRIAUX (0x02800000) -#define VR1000_PA_IDESEC (0x03000000) -#define VR1000_PA_IDESECAUX (0x03800000) -#define VR1000_PA_DM9000 (0x05000000) - -#define VR1000_PA_SERIAL (0x11800000) -#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) - -/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ -#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) - -/* some configurations for the peripherals */ - -#define VR1000_DM9000_CS VR1000_VAM_CS4 - -#endif /* __ASM_ARCH_VR1000MAP_H */ diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/include/asm-arm/arch-sa1100/SA-1100.h deleted file mode 100644 index 62aaf04a390..00000000000 --- a/include/asm-arm/arch-sa1100/SA-1100.h +++ /dev/null @@ -1,2072 +0,0 @@ -/* - * FILE SA-1100.h - * - * Version 1.2 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date January 1998 (April 1997) - * System StrongARM SA-1100 - * Language C or ARM Assembly - * Purpose Definition of constants related to the StrongARM - * SA-1100 microprocessor (Advanced RISC Machine (ARM) - * architecture version 4). This file is based on the - * StrongARM SA-1100 data sheet version 2.2. - * - */ - - -/* Be sure that virtual mapping is defined right */ -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not SA-1100.h -#endif - -#include "bitfield.h" - -/* - * SA1100 CS line to physical address - */ - -#define SA1100_CS0_PHYS 0x00000000 -#define SA1100_CS1_PHYS 0x08000000 -#define SA1100_CS2_PHYS 0x10000000 -#define SA1100_CS3_PHYS 0x18000000 -#define SA1100_CS4_PHYS 0x40000000 -#define SA1100_CS5_PHYS 0x48000000 - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ - -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ - - -/* - * Universal Serial Bus (USB) Device Controller (UDC) control registers - * - * Registers - * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control Register (read/write). - * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Address Register (read/write). - * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Output Maximum Packet size register - * (read/write). - * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Input Maximum Packet size register - * (read/write). - * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control/Status register end-point 0 - * (read/write). - * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control/Status register end-point 1 - * (output, read/write). - * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control/Status register end-point 2 - * (input, read/write). - * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Data register end-point 0 - * (read/write). - * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Write Count register end-point 0 - * (read). - * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Data Register (read/write). - * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Status Register (read/write). - */ - -#define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */ -#define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */ -#define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */ -#define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */ -#define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */ -#define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */ -#define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */ -#define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */ -#define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */ -#define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */ -#define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */ - -#define UDCCR_UDD 0x00000001 /* UDC Disable */ -#define UDCCR_UDA 0x00000002 /* UDC Active (read) */ -#define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */ -#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */ - /* (disable) */ -#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */ - /* (disable) */ -#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */ - /* (disable) */ -#define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */ - /* (disable) */ -#define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */ -#define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */ - -#define UDCAR_ADD Fld (7, 0) /* function ADDress */ - -#define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */ - /* [byte] */ -#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \ - /* [1..256 byte] */ \ - (((Size) - 1) << FShft (UDCOMP_OUTMAXP)) - -#define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */ - /* [byte] */ -#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \ - /* [1..256 byte] */ \ - (((Size) - 1) << FShft (UDCIMP_INMAXP)) - -#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */ -#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */ -#define UDCCS0_SST 0x00000004 /* Sent STall */ -#define UDCCS0_FST 0x00000008 /* Force STall */ -#define UDCCS0_DE 0x00000010 /* Data End */ -#define UDCCS0_SE 0x00000020 /* Setup End (read) */ -#define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */ - /* (write) */ -#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */ - -#define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */ - /* Service request (read) */ -#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */ -#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */ -#define UDCCS1_SST 0x00000008 /* Sent STall */ -#define UDCCS1_FST 0x00000010 /* Force STall */ -#define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */ - -#define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */ - /* Service request (read) */ -#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */ -#define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */ -#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */ -#define UDCCS2_SST 0x00000010 /* Sent STall */ -#define UDCCS2_FST 0x00000020 /* Force STall */ - -#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ - -#define UDCWC_WC Fld (4, 0) /* Write Count */ - -#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ - -#define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */ -#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */ -#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */ -#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */ -#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */ -#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */ - - -/* - * Universal Asynchronous Receiver/Transmitter (UART) control registers - * - * Registers - * Ser1UTCR0 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 0 - * (read/write). - * Ser1UTCR1 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 1 - * (read/write). - * Ser1UTCR2 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 2 - * (read/write). - * Ser1UTCR3 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 3 - * (read/write). - * Ser1UTDR Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Data Register - * (read/write). - * Ser1UTSR0 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 0 - * (read/write). - * Ser1UTSR1 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 1 (read). - * - * Ser2UTCR0 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 0 - * (read/write). - * Ser2UTCR1 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 1 - * (read/write). - * Ser2UTCR2 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 2 - * (read/write). - * Ser2UTCR3 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 3 - * (read/write). - * Ser2UTCR4 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 4 - * (read/write). - * Ser2UTDR Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Data Register - * (read/write). - * Ser2UTSR0 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 0 - * (read/write). - * Ser2UTSR1 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 1 (read). - * - * Ser3UTCR0 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 0 - * (read/write). - * Ser3UTCR1 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 1 - * (read/write). - * Ser3UTCR2 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 2 - * (read/write). - * Ser3UTCR3 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 3 - * (read/write). - * Ser3UTDR Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Data Register - * (read/write). - * Ser3UTSR0 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 0 - * (read/write). - * Ser3UTSR1 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 1 (read). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fua, Tua Frequency, period of the UART communication. - */ - -#define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */ -#define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */ -#define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */ -#define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */ -#define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */ -#define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */ -#define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */ -#define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */ - -#define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */ -#define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */ -#define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */ -#define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */ -#define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */ -#define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */ -#define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */ - -#define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */ -#define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */ -#define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */ -#define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */ -#define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */ -#define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */ -#define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */ -#define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */ - -#define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */ -#define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */ -#define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */ -#define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */ -#define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */ -#define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */ -#define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */ - -/* Those are still used in some places */ -#define _Ser1UTCR0 __PREG(Ser1UTCR0) -#define _Ser2UTCR0 __PREG(Ser2UTCR0) -#define _Ser3UTCR0 __PREG(Ser3UTCR0) - -/* Register offsets */ -#define UTCR0 0x00 -#define UTCR1 0x04 -#define UTCR2 0x08 -#define UTCR3 0x0c -#define UTDR 0x14 -#define UTSR0 0x1c -#define UTSR1 0x20 - -#define UTCR0_PE 0x00000001 /* Parity Enable */ -#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */ -#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */ -#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */ -#define UTCR0_SBS 0x00000004 /* Stop Bit Select */ -#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */ -#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */ -#define UTCR0_DSS 0x00000008 /* Data Size Select */ -#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */ -#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */ -#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */ - /* (ser. port 1: GPIO [18], */ - /* ser. port 3: GPIO [20]) */ -#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */ -#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */ -#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */ -#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */ -#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */ -#define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */ -#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \ - (UTCR0_1StpBit + UTCR0_8BitData) - -#define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ -#define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ - /* fua = fxtl/(16*(BRD[11:0] + 1)) */ - /* Tua = 16*(BRD [11:0] + 1)*Txtl */ -#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \ - FShft (UTCR1_BRD)) -#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \ - FShft (UTCR2_BRD)) - /* fua = fxtl/(16*Floor (Div/16)) */ - /* Tua = 16*Floor (Div/16)*Txtl */ -#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \ - FShft (UTCR1_BRD)) -#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \ - FShft (UTCR2_BRD)) - /* fua = fxtl/(16*Ceil (Div/16)) */ - /* Tua = 16*Ceil (Div/16)*Txtl */ - -#define UTCR3_RXE 0x00000001 /* Receive Enable */ -#define UTCR3_TXE 0x00000002 /* Transmit Enable */ -#define UTCR3_BRK 0x00000004 /* BReaK mode */ -#define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Interrupt Enable */ -#define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define UTCR3_LBM 0x00000020 /* Look-Back Mode */ -#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \ - /* TIE, LBM can be set or cleared) */ \ - (UTCR3_RXE + UTCR3_TXE) - -#define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */ - /* (HP-SIR) modulation Enable */ -#define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */ -#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */ -#define UTCR4_LPM 0x00000002 /* Low-Power Mode */ -#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */ -#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */ - -#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ -#if 0 /* Hidden receive FIFO bits */ -#define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */ -#define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */ -#define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ -#endif /* 0 */ - -#define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Service request (read) */ -#define UTSR0_RID 0x00000004 /* Receiver IDle */ -#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */ -#define UTSR0_REB 0x00000010 /* Receive End of Break */ -#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */ - -#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ -#define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */ -#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ -#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */ -#define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */ -#define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */ - - -/* - * Synchronous Data Link Controller (SDLC) control registers - * - * Registers - * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 0 (read/write). - * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 1 (read/write). - * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 2 (read/write). - * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 3 (read/write). - * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 4 (read/write). - * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC) - * Data Register (read/write). - * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC) - * Status Register 0 (read/write). - * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC) - * Status Register 1 (read/write). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fsd, Tsd Frequency, period of the SDLC communication. - */ - -#define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */ -#define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */ -#define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */ -#define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */ -#define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */ -#define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */ -#define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */ -#define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */ - -#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */ -#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */ -#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */ -#define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */ -#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */ -#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */ -#define SDCR0_LBM 0x00000004 /* Look-Back Mode */ -#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */ -#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */ -#define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */ -#define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */ -#define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */ - /* (GPIO [16]) */ -#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */ -#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */ -#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */ -#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */ -#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */ -#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */ -#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */ -#define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */ - -#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */ - /* (GPIO [17]) */ -#define SDCR1_TXE 0x00000002 /* Transmit Enable */ -#define SDCR1_RXE 0x00000004 /* Receive Enable */ -#define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Interrupt Enable */ -#define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define SDCR1_AME 0x00000020 /* Address Match Enable */ -#define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */ -#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */ -#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */ -#define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */ - -#define SDCR2_AMV Fld (8, 0) /* Address Match Value */ - -#define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ -#define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ - /* fsd = fxtl/(16*(BRD[11:0] + 1)) */ - /* Tsd = 16*(BRD[11:0] + 1)*Txtl */ -#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \ - FShft (SDCR3_BRD)) -#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \ - FShft (SDCR4_BRD)) - /* fsd = fxtl/(16*Floor (Div/16)) */ - /* Tsd = 16*Floor (Div/16)*Txtl */ -#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \ - FShft (SDCR3_BRD)) -#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \ - FShft (SDCR4_BRD)) - /* fsd = fxtl/(16*Ceil (Div/16)) */ - /* Tsd = 16*Ceil (Div/16)*Txtl */ - -#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ -#if 0 /* Hidden receive FIFO bits */ -#define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ -#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */ -#define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ -#endif /* 0 */ - -#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */ -#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ -#define SDSR0_RAB 0x00000004 /* Receive ABort */ -#define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Service request (read) */ - -#define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ -#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */ -#define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ -#define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ -#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */ -#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */ -#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */ -#define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */ - - -/* - * High-Speed Serial to Parallel controller (HSSP) control registers - * - * Registers - * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Control Register 0 (read/write). - * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Control Register 1 (read/write). - * Ser2HSDR Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Data Register (read/write). - * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Status Register 0 (read/write). - * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Status Register 1 (read). - * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Control Register 2 (read/write). - * [The HSCR2 register is only implemented in - * versions 2.0 (rev. = 8) and higher of the StrongARM - * SA-1100.] - */ - -#define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */ -#define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */ -#define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */ -#define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */ -#define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */ -#define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */ - -#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */ -#define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */ -#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */ -#define HSCR0_LBM 0x00000002 /* Look-Back Mode */ -#define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */ -#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */ -#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */ -#define HSCR0_TXE 0x00000008 /* Transmit Enable */ -#define HSCR0_RXE 0x00000010 /* Receive Enable */ -#define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */ - /* more Interrupt Enable */ -#define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define HSCR0_AME 0x00000080 /* Address Match Enable */ - -#define HSCR1_AMV Fld (8, 0) /* Address Match Value */ - -#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ -#if 0 /* Hidden receive FIFO bits */ -#define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ -#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */ -#define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ -#endif /* 0 */ - -#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */ -#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ -#define HSSR0_RAB 0x00000004 /* Receive ABort */ -#define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */ - /* more Service request (read) */ -#define HSSR0_FRE 0x00000020 /* receive FRaming Error */ - -#define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ -#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */ -#define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ -#define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ -#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */ -#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */ -#define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */ - -#define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */ -#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */ - /* (inverted) */ -#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */ - /* (non-inverted) */ -#define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */ -#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */ - /* (inverted) */ -#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */ - /* (non-inverted) */ - - -/* - * Multi-media Communications Port (MCP) control registers - * - * Registers - * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP) - * Control Register 0 (read/write). - * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP) - * Data Register 0 (audio, read/write). - * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP) - * Data Register 1 (telecom, read/write). - * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP) - * Data Register 2 (CODEC registers, read/write). - * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP) - * Status Register (read/write). - * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP) - * Control Register 1 (read/write). - * [The MCCR1 register is only implemented in - * versions 2.0 (rev. = 8) and higher of the StrongARM - * SA-1100.] - * - * Clocks - * fmc, Tmc Frequency, period of the MCP communication (10 MHz, - * 12 MHz, or GPIO [21]). - * faud, Taud Frequency, period of the audio sampling. - * ftcm, Ttcm Frequency, period of the telecom sampling. - */ - -#define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */ -#define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */ -#define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */ -#define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */ -#define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */ -#define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */ - -#define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */ - /* [6..127] */ - /* faud = fmc/(32*ASD) */ - /* Taud = 32*ASD*Tmc */ -#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \ - /* [192..4064] */ \ - ((Div)/32 << FShft (MCCR0_ASD)) - /* faud = fmc/(32*Floor (Div/32)) */ - /* Taud = 32*Floor (Div/32)*Tmc */ -#define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \ - (((Div) + 31)/32 << FShft (MCCR0_ASD)) - /* faud = fmc/(32*Ceil (Div/32)) */ - /* Taud = 32*Ceil (Div/32)*Tmc */ -#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */ - /* Divisor/32 [16..127] */ - /* ftcm = fmc/(32*TSD) */ - /* Ttcm = 32*TSD*Tmc */ -#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \ - /* [512..4064] */ \ - ((Div)/32 << FShft (MCCR0_TSD)) - /* ftcm = fmc/(32*Floor (Div/32)) */ - /* Ttcm = 32*Floor (Div/32)*Tmc */ -#define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \ - (((Div) + 31)/32 << FShft (MCCR0_TSD)) - /* ftcm = fmc/(32*Ceil (Div/32)) */ - /* Ttcm = 32*Ceil (Div/32)*Tmc */ -#define MCCR0_MCE 0x00010000 /* MCP Enable */ -#define MCCR0_ECS 0x00020000 /* External Clock Select */ -#define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */ -#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */ -#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */ - /* sampling/storing Mode */ -#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */ -#define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */ -#define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */ - /* or less interrupt Enable */ -#define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */ - /* or more interrupt Enable */ -#define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */ - /* or less interrupt Enable */ -#define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */ - /* more interrupt Enable */ -#define MCCR0_LBM 0x00800000 /* Look-Back Mode */ -#define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */ -#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \ - (((Div) - 1) << FShft (MCCR0_ECP)) - -#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */ - /* FIFOs */ - -#define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */ - /* FIFOs */ - - /* receive/transmit CODEC reg. */ - /* FIFOs: */ -#define MCDR2_DATA Fld (16, 0) /* reg. DATA */ -#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */ -#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */ -#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */ -#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */ - -#define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */ - /* or less Service request (read) */ -#define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */ - /* more Service request (read) */ -#define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */ - /* or less Service request (read) */ -#define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */ - /* or more Service request (read) */ -#define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */ -#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */ -#define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */ -#define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */ -#define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */ - /* (read) */ -#define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */ - /* (read) */ -#define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */ - /* (read) */ -#define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */ - /* (read) */ -#define MCSR_CWC 0x00001000 /* CODEC register Write Completed */ - /* (read) */ -#define MCSR_CRC 0x00002000 /* CODEC register Read Completed */ - /* (read) */ -#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */ -#define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */ - -#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */ -#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */ - /* (11.981 MHz) */ -#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */ - /* (9.585 MHz) */ - - -/* - * Synchronous Serial Port (SSP) control registers - * - * Registers - * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control - * Register 0 (read/write). - * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control - * Register 1 (read/write). - * [Bits SPO and SP are only implemented in versions 2.0 - * (rev. = 8) and higher of the StrongARM SA-1100.] - * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data - * Register (read/write). - * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status - * Register (read/write). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fss, Tss Frequency, period of the SSP communication. - */ - -#define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */ -#define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */ -#define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */ -#define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */ - -#define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */ -#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \ - (((Size) - 1) << FShft (SSCR0_DSS)) -#define SSCR0_FRF Fld (2, 4) /* FRame Format */ -#define SSCR0_Motorola /* Motorola Serial Peripheral */ \ - /* Interface (SPI) format */ \ - (0 << FShft (SSCR0_FRF)) -#define SSCR0_TI /* Texas Instruments Synchronous */ \ - /* Serial format */ \ - (1 << FShft (SSCR0_FRF)) -#define SSCR0_National /* National Microwire format */ \ - (2 << FShft (SSCR0_FRF)) -#define SSCR0_SSE 0x00000080 /* SSP Enable */ -#define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */ - /* fss = fxtl/(2*(SCR + 1)) */ - /* Tss = 2*(SCR + 1)*Txtl */ -#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \ - (((Div) - 2)/2 << FShft (SSCR0_SCR)) - /* fss = fxtl/(2*Floor (Div/2)) */ - /* Tss = 2*Floor (Div/2)*Txtl */ -#define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \ - (((Div) - 1)/2 << FShft (SSCR0_SCR)) - /* fss = fxtl/(2*Ceil (Div/2)) */ - /* Tss = 2*Ceil (Div/2)*Txtl */ - -#define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */ - /* Interrupt Enable */ -#define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define SSCR1_LBM 0x00000004 /* Look-Back Mode */ -#define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */ -#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */ -#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */ -#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */ -#define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */ - /* after frame (SFRM, 1st edge) */ -#define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */ - /* after frame (SFRM, 1st edge) */ -#define SSCR1_ECS 0x00000020 /* External Clock Select */ -#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */ -#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */ - -#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */ - -#define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */ -#define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ -#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */ -#define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */ - /* Service request (read) */ -#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */ - - -/* - * Operating System (OS) timer control registers - * - * Registers - * OSMR0 Operating System (OS) timer Match Register 0 - * (read/write). - * OSMR1 Operating System (OS) timer Match Register 1 - * (read/write). - * OSMR2 Operating System (OS) timer Match Register 2 - * (read/write). - * OSMR3 Operating System (OS) timer Match Register 3 - * (read/write). - * OSCR Operating System (OS) timer Counter Register - * (read/write). - * OSSR Operating System (OS) timer Status Register - * (read/write). - * OWER Operating System (OS) timer Watch-dog Enable Register - * (read/write). - * OIER Operating System (OS) timer Interrupt Enable Register - * (read/write). - */ - -#define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */ -#define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */ -#define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */ -#define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */ -#define OSCR __REG(0x90000010) /* OS timer Counter Reg. */ -#define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */ -#define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */ -#define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */ - -#define OSSR_M(Nb) /* Match detected [0..3] */ \ - (0x00000001 << (Nb)) -#define OSSR_M0 OSSR_M (0) /* Match detected 0 */ -#define OSSR_M1 OSSR_M (1) /* Match detected 1 */ -#define OSSR_M2 OSSR_M (2) /* Match detected 2 */ -#define OSSR_M3 OSSR_M (3) /* Match detected 3 */ - -#define OWER_WME 0x00000001 /* Watch-dog Match Enable */ - /* (set only) */ - -#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \ - (0x00000001 << (Nb)) -#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */ -#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */ -#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */ -#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */ - - -/* - * Real-Time Clock (RTC) control registers - * - * Registers - * RTAR Real-Time Clock (RTC) Alarm Register (read/write). - * RCNR Real-Time Clock (RTC) CouNt Register (read/write). - * RTTR Real-Time Clock (RTC) Trim Register (read/write). - * RTSR Real-Time Clock (RTC) Status Register (read/write). - * - * Clocks - * frtx, Trtx Frequency, period of the real-time clock crystal - * (32.768 kHz nominal). - * frtc, Trtc Frequency, period of the real-time clock counter - * (1 Hz nominal). - */ - -#define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ -#define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ -#define RTTR __REG(0x90010008) /* RTC Trim Reg. */ -#define RTSR __REG(0x90010010) /* RTC Status Reg. */ - -#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */ -#define RTTR_D Fld (10, 16) /* trim Delete count */ - /* frtc = (1023*(C + 1) - D)*frtx/ */ - /* (1023*(C + 1)^2) */ - /* Trtc = (1023*(C + 1)^2)*Trtx/ */ - /* (1023*(C + 1) - D) */ - -#define RTSR_AL 0x00000001 /* ALarm detected */ -#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */ -#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */ -#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */ - - -/* - * Power Manager (PM) control registers - * - * Registers - * PMCR Power Manager (PM) Control Register (read/write). - * PSSR Power Manager (PM) Sleep Status Register (read/write). - * PSPR Power Manager (PM) Scratch-Pad Register (read/write). - * PWER Power Manager (PM) Wake-up Enable Register - * (read/write). - * PCFR Power Manager (PM) general ConFiguration Register - * (read/write). - * PPCR Power Manager (PM) Phase-Locked Loop (PLL) - * Configuration Register (read/write). - * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO) - * Sleep state Register (read/write, see GPIO pins). - * POSR Power Manager (PM) Oscillator Status Register (read). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - */ - -#define PMCR __REG(0x90020000) /* PM Control Reg. */ -#define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */ -#define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */ -#define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */ -#define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */ -#define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */ -#define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */ -#define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */ - -#define PMCR_SF 0x00000001 /* Sleep Force (set only) */ - -#define PSSR_SS 0x00000001 /* Software Sleep */ -#define PSSR_BFS 0x00000002 /* Battery Fault Status */ - /* (BATT_FAULT) */ -#define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */ -#define PSSR_DH 0x00000008 /* DRAM control Hold */ -#define PSSR_PH 0x00000010 /* Peripheral control Hold */ - -#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */ -#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ -#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ -#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ -#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ -#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ -#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ -#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ -#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ -#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ -#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ -#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ -#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ -#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ -#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ -#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ -#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ -#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */ -#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */ -#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */ -#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */ -#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */ -#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */ -#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */ -#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */ -#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */ -#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */ -#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */ -#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */ -#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ - -#define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */ -#define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */ -#define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */ -#define PCFR_FP 0x00000002 /* Float PCMCIA pins */ -#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */ -#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */ -#define PCFR_FS 0x00000004 /* Float Static memory pins */ -#define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */ -#define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */ -#define PCFR_FO 0x00000008 /* Force RTC oscillator */ - /* (32.768 kHz) enable On */ - -#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */ -#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \ - (0x00 << FShft (PPCR_CCF)) -#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \ - (0x01 << FShft (PPCR_CCF)) -#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \ - (0x02 << FShft (PPCR_CCF)) -#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \ - (0x03 << FShft (PPCR_CCF)) -#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \ - (0x04 << FShft (PPCR_CCF)) -#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \ - (0x05 << FShft (PPCR_CCF)) -#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \ - (0x06 << FShft (PPCR_CCF)) -#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \ - (0x07 << FShft (PPCR_CCF)) -#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \ - (0x08 << FShft (PPCR_CCF)) -#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \ - (0x09 << FShft (PPCR_CCF)) -#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \ - (0x0A << FShft (PPCR_CCF)) -#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \ - (0x0B << FShft (PPCR_CCF)) -#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \ - (0x0C << FShft (PPCR_CCF)) -#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \ - (0x0D << FShft (PPCR_CCF)) -#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \ - (0x0E << FShft (PPCR_CCF)) -#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \ - (0x0F << FShft (PPCR_CCF)) - /* 3.6864 MHz crystal (fxtl): */ -#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */ -#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */ -#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */ -#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */ -#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */ -#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */ -#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */ -#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */ -#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */ -#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */ -#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */ -#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */ -#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */ -#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */ -#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */ -#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */ - /* 3.5795 MHz crystal (fxtl): */ -#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */ -#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */ -#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */ -#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */ -#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */ -#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */ -#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */ -#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */ -#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */ -#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */ -#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */ -#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */ -#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */ -#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */ -#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */ -#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */ - -#define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */ - - -/* - * Reset Controller (RC) control registers - * - * Registers - * RSRR Reset Controller (RC) Software Reset Register - * (read/write). - * RCSR Reset Controller (RC) Status Register (read/write). - */ - -#define RSRR __REG(0x90030000) /* RC Software Reset Reg. */ -#define RCSR __REG(0x90030004) /* RC Status Reg. */ - -#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */ - -#define RCSR_HWR 0x00000001 /* HardWare Reset */ -#define RCSR_SWR 0x00000002 /* SoftWare Reset */ -#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */ -#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */ - - -/* - * Test unit control registers - * - * Registers - * TUCR Test Unit Control Register (read/write). - */ - -#define TUCR __REG(0x90030008) /* Test Unit Control Reg. */ - -#define TUCR_TIC 0x00000040 /* TIC mode */ -#define TUCR_TTST 0x00000080 /* Trim TeST mode */ -#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */ - /* Check */ -#define TUCR_PMD 0x00000200 /* Power Management Disable */ -#define TUCR_MR 0x00000400 /* Memory Request mode */ -#define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */ -#define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */ - /* grant (MBGNT) on GPIO [22:21] */ -#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */ -#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */ -#define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */ -#define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */ -#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */ -#define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */ -#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \ - (0 << FShft (TUCR_TSEL)) -#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \ - (1 << FShft (TUCR_TSEL)) -#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \ - (2 << FShft (TUCR_TSEL)) -#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \ - (3 << FShft (TUCR_TSEL)) -#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \ - /* Clocks on GPIO [26:27] */ \ - (4 << FShft (TUCR_TSEL)) -#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \ - /* (Alternative) */ \ - (5 << FShft (TUCR_TSEL)) -#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \ - (6 << FShft (TUCR_TSEL)) -#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \ - (7 << FShft (TUCR_TSEL)) - - -/* - * General-Purpose Input/Output (GPIO) control registers - * - * Registers - * GPLR General-Purpose Input/Output (GPIO) Pin Level - * Register (read). - * GPDR General-Purpose Input/Output (GPIO) Pin Direction - * Register (read/write). - * GPSR General-Purpose Input/Output (GPIO) Pin output Set - * Register (write). - * GPCR General-Purpose Input/Output (GPIO) Pin output Clear - * Register (write). - * GRER General-Purpose Input/Output (GPIO) Rising-Edge - * detect Register (read/write). - * GFER General-Purpose Input/Output (GPIO) Falling-Edge - * detect Register (read/write). - * GEDR General-Purpose Input/Output (GPIO) Edge Detect - * status Register (read/write). - * GAFR General-Purpose Input/Output (GPIO) Alternate - * Function Register (read/write). - * - * Clock - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - */ - -#define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */ -#define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */ -#define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */ -#define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */ -#define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */ -#define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */ -#define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */ -#define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */ - -#define GPIO_MIN (0) -#define GPIO_MAX (27) - -#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ - (0x00000001 << (Nb)) -#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */ -#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */ -#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */ -#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */ -#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */ -#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */ -#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */ -#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */ -#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */ -#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */ -#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */ -#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */ -#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */ -#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */ -#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */ -#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */ -#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */ -#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */ -#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */ -#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */ -#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */ -#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */ -#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */ -#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */ -#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */ -#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */ -#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */ -#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */ - -#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \ - GPIO_GPIO ((Nb) - 6) -#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */ -#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */ -#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */ -#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */ -#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */ -#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */ -#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */ -#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */ - /* ser. port 4: */ -#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */ -#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */ -#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */ -#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */ - /* ser. port 1: */ -#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */ -#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */ -#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */ -#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */ -#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */ - /* ser. port 4: */ -#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */ - /* ser. port 3: */ -#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */ - /* ser. port 4: */ -#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */ - /* test controller: */ -#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */ -#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */ -#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */ -#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */ -#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */ -#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */ -#define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */ -#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */ - -#define GPDR_In 0 /* Input */ -#define GPDR_Out 1 /* Output */ - - -/* - * Interrupt Controller (IC) control registers - * - * Registers - * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ) - * Pending register (read). - * ICMR Interrupt Controller (IC) Mask Register (read/write). - * ICLR Interrupt Controller (IC) Level Register (read/write). - * ICCR Interrupt Controller (IC) Control Register - * (read/write). - * [The ICCR register is only implemented in versions 2.0 - * (rev. = 8) and higher of the StrongARM SA-1100.] - * ICFP Interrupt Controller (IC) Fast Interrupt reQuest - * (FIQ) Pending register (read). - * ICPR Interrupt Controller (IC) Pending Register (read). - * [The ICPR register is active low (inverted) in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it is active high (non-inverted) in - * versions 2.0 (rev. = 8) and higher.] - */ - -#define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */ -#define ICMR __REG(0x90050004) /* IC Mask Reg. */ -#define ICLR __REG(0x90050008) /* IC Level Reg. */ -#define ICCR __REG(0x9005000C) /* IC Control Reg. */ -#define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */ -#define ICPR __REG(0x90050020) /* IC Pending Reg. */ - -#define IC_GPIO(Nb) /* GPIO [0..10] */ \ - (0x00000001 << (Nb)) -#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */ -#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */ -#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */ -#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */ -#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */ -#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */ -#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */ -#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */ -#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */ -#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */ -#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */ -#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */ -#define IC_LCD 0x00001000 /* LCD controller */ -#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */ -#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */ -#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */ -#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */ -#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */ -#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */ -#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */ -#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \ - (0x00100000 << (Nb)) -#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */ -#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */ -#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */ -#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */ -#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */ -#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */ -#define IC_OST(Nb) /* OS Timer match [0..3] */ \ - (0x04000000 << (Nb)) -#define IC_OST0 IC_OST (0) /* OS Timer match 0 */ -#define IC_OST1 IC_OST (1) /* OS Timer match 1 */ -#define IC_OST2 IC_OST (2) /* OS Timer match 2 */ -#define IC_OST3 IC_OST (3) /* OS Timer match 3 */ -#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */ -#define IC_RTCAlrm 0x80000000 /* RTC Alarm */ - -#define ICLR_IRQ 0 /* Interrupt ReQuest */ -#define ICLR_FIQ 1 /* Fast Interrupt reQuest */ - -#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */ - /* Mask */ -#define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */ - /* (ICMR ignored) */ -#define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */ - /* enable (ICMR used) */ - - -/* - * Peripheral Pin Controller (PPC) control registers - * - * Registers - * PPDR Peripheral Pin Controller (PPC) Pin Direction - * Register (read/write). - * PPSR Peripheral Pin Controller (PPC) Pin State Register - * (read/write). - * PPAR Peripheral Pin Controller (PPC) Pin Assignment - * Register (read/write). - * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin - * Direction Register (read/write). - * PPFR Peripheral Pin Controller (PPC) Pin Flag Register - * (read). - */ - -#define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */ -#define PPSR __REG(0x90060004) /* PPC Pin State Reg. */ -#define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */ -#define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */ -#define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */ - -#define PPC_LDD(Nb) /* LCD Data [0..7] */ \ - (0x00000001 << (Nb)) -#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */ -#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */ -#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */ -#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */ -#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */ -#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */ -#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */ -#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */ -#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */ -#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */ -#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */ -#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */ - /* ser. port 1: */ -#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */ -#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */ - /* ser. port 2: */ -#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */ -#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */ - /* ser. port 3: */ -#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */ -#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */ - /* ser. port 4: */ -#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */ -#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */ -#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */ -#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */ - -#define PPDR_In 0 /* Input */ -#define PPDR_Out 1 /* Output */ - - /* ser. port 1: */ -#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */ -#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */ -#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */ - /* ser. port 4: */ -#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */ -#define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */ - /* & SFRM_C */ -#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */ - -#define PSDR_OutL 0 /* Output Low in sleep mode */ -#define PSDR_Flt 1 /* Floating (input) in sleep mode */ - -#define PPFR_LCD 0x00000001 /* LCD controller */ -#define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */ -#define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */ -#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */ -#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */ -#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */ -#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */ -#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */ -#define PPFR_PerEn 0 /* Peripheral Enabled */ -#define PPFR_PPCEn 1 /* PPC Enabled */ - - -/* - * Dynamic Random-Access Memory (DRAM) control registers - * - * Registers - * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM) - * CoNFiGuration register (read/write). - * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM) - * Column Address Strobe (CAS) shift register 0 - * (read/write). - * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM) - * Column Address Strobe (CAS) shift register 1 - * (read/write). - * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM) - * Column Address Strobe (CAS) shift register 2 - * (read/write). - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - * fcas, Tcas Frequency, period of the DRAM CAS shift registers. - */ - -#define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */ -#define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */ -#define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */ -#define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */ - -/* SA1100 MDCNFG values */ -#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \ - (0x00000001 << (Nb)) -#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */ -#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */ -#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */ -#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */ -#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */ -#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \ - (((Add) - 9) << FShft (MDCNFG_DRAC)) -#define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */ - /* (fcas = fcpu/2) */ -#define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */ -#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \ - (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP)) -#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \ - (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP)) -#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */ -#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \ - (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR)) -#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \ - (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR)) -#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */ -#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \ - ((Tcpu) << FShft (MDCNFG_TDL)) -#define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */ - /* [Tmem] */ -#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \ - /* [0..262136 Tcpu] */ \ - ((Tcpu)/8 << FShft (MDCNFG_DRI)) - -/* SA1110 MDCNFG values */ -#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */ -#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */ -#define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */ -#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */ -#define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */ - /* bank 0/1 */ -#define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */ -#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */ -#define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/ - /* deassertion 0/1 */ -#define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */ -#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */ -#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */ -#define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */ -#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */ -#define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */ - /* bank 0/1 */ -#define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */ -#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */ -#define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/ - /* deassertion 0/1 */ -#define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */ - - -/* - * Static memory control registers - * - * Registers - * MSC0 Memory system: Static memory Control register 0 - * (read/write). - * MSC1 Memory system: Static memory Control register 1 - * (read/write). - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - */ - -#define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */ -#define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */ -#define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */ - -#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \ - Fld (16, ((Nb) Modulo 2)*16) -#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */ -#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */ -#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */ -#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */ - -#define MSC_RT Fld (2, 0) /* ROM/static memory Type */ -#define MSC_NonBrst /* Non-Burst static memory */ \ - (0 << FShft (MSC_RT)) -#define MSC_SRAM /* 32-bit byte-writable SRAM */ \ - (1 << FShft (MSC_RT)) -#define MSC_Brst4 /* Burst-of-4 static memory */ \ - (2 << FShft (MSC_RT)) -#define MSC_Brst8 /* Burst-of-8 static memory */ \ - (3 << FShft (MSC_RT)) -#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */ -#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */ -#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */ -#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */ - /* First access - 1(.5) [Tmem] */ -#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \ - /* static memory) [3..65 Tcpu] */ \ - ((((Tcpu) - 3)/2) << FShft (MSC_RDF)) -#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) -#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \ - /* static memory) [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) -#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MSC_RDF)) -#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */ - /* Next access - 1 [Tmem] */ -#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \ - /* static memory) [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) -#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) -#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \ - /* static memory) [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) -#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) -#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */ - /* time/2 [Tmem] */ -#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \ - (((Tcpu)/4) << FShft (MSC_RRR)) -#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \ - ((((Tcpu) + 3)/4) << FShft (MSC_RRR)) - - -/* - * Personal Computer Memory Card International Association (PCMCIA) control - * register - * - * Register - * MECR Memory system: Expansion memory bus (PCMCIA) - * Configuration Register (read/write). - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK). - */ - - /* Memory system: */ -#define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */ - -#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \ - Fld (15, (Nb)*16) -#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */ -#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */ - -#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */ -#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MECR_BSIO)) -#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MECR_BSIO)) -#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */ - /* [Tmem] */ -#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MECR_BSA)) -#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MECR_BSA)) -#define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */ -#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MECR_BSM)) -#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MECR_BSM)) - -/* - * On SA1110 only - */ - -#define MDREFR __REG(0xA000001C) - -#define MDREFR_TRASR Fld (4, 0) -#define MDREFR_DRI Fld (12, 4) -#define MDREFR_E0PIN (1 << 16) -#define MDREFR_K0RUN (1 << 17) -#define MDREFR_K0DB2 (1 << 18) -#define MDREFR_E1PIN (1 << 20) -#define MDREFR_K1RUN (1 << 21) -#define MDREFR_K1DB2 (1 << 22) -#define MDREFR_K2RUN (1 << 25) -#define MDREFR_K2DB2 (1 << 26) -#define MDREFR_EAPD (1 << 28) -#define MDREFR_KAPD (1 << 29) -#define MDREFR_SLFRSH (1 << 31) - - -/* - * Direct Memory Access (DMA) control registers - * - * Registers - * DDAR0 Direct Memory Access (DMA) Device Address Register - * channel 0 (read/write). - * DCSR0 Direct Memory Access (DMA) Control and Status - * Register channel 0 (read/write). - * DBSA0 Direct Memory Access (DMA) Buffer Start address - * register A channel 0 (read/write). - * DBTA0 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 0 (read/write). - * DBSB0 Direct Memory Access (DMA) Buffer Start address - * register B channel 0 (read/write). - * DBTB0 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 0 (read/write). - * - * DDAR1 Direct Memory Access (DMA) Device Address Register - * channel 1 (read/write). - * DCSR1 Direct Memory Access (DMA) Control and Status - * Register channel 1 (read/write). - * DBSA1 Direct Memory Access (DMA) Buffer Start address - * register A channel 1 (read/write). - * DBTA1 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 1 (read/write). - * DBSB1 Direct Memory Access (DMA) Buffer Start address - * register B channel 1 (read/write). - * DBTB1 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 1 (read/write). - * - * DDAR2 Direct Memory Access (DMA) Device Address Register - * channel 2 (read/write). - * DCSR2 Direct Memory Access (DMA) Control and Status - * Register channel 2 (read/write). - * DBSA2 Direct Memory Access (DMA) Buffer Start address - * register A channel 2 (read/write). - * DBTA2 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 2 (read/write). - * DBSB2 Direct Memory Access (DMA) Buffer Start address - * register B channel 2 (read/write). - * DBTB2 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 2 (read/write). - * - * DDAR3 Direct Memory Access (DMA) Device Address Register - * channel 3 (read/write). - * DCSR3 Direct Memory Access (DMA) Control and Status - * Register channel 3 (read/write). - * DBSA3 Direct Memory Access (DMA) Buffer Start address - * register A channel 3 (read/write). - * DBTA3 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 3 (read/write). - * DBSB3 Direct Memory Access (DMA) Buffer Start address - * register B channel 3 (read/write). - * DBTB3 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 3 (read/write). - * - * DDAR4 Direct Memory Access (DMA) Device Address Register - * channel 4 (read/write). - * DCSR4 Direct Memory Access (DMA) Control and Status - * Register channel 4 (read/write). - * DBSA4 Direct Memory Access (DMA) Buffer Start address - * register A channel 4 (read/write). - * DBTA4 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 4 (read/write). - * DBSB4 Direct Memory Access (DMA) Buffer Start address - * register B channel 4 (read/write). - * DBTB4 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 4 (read/write). - * - * DDAR5 Direct Memory Access (DMA) Device Address Register - * channel 5 (read/write). - * DCSR5 Direct Memory Access (DMA) Control and Status - * Register channel 5 (read/write). - * DBSA5 Direct Memory Access (DMA) Buffer Start address - * register A channel 5 (read/write). - * DBTA5 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 5 (read/write). - * DBSB5 Direct Memory Access (DMA) Buffer Start address - * register B channel 5 (read/write). - * DBTB5 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 5 (read/write). - */ - -#define DMASp 0x00000020 /* DMA control reg. Space [byte] */ - -#define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */ -#define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */ -#define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */ -#define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */ -#define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */ -#define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */ -#define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */ -#define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */ - -#define DDAR_RW 0x00000001 /* device data Read/Write */ -#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */ - /* (memory -> device) */ -#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */ - /* (device -> memory) */ -#define DDAR_E 0x00000002 /* big/little Endian device */ -#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */ -#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */ -#define DDAR_BS 0x00000004 /* device Burst Size */ -#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */ -#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */ -#define DDAR_DW 0x00000008 /* device Data Width */ -#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */ -#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */ -#define DDAR_DS Fld (4, 4) /* Device Select */ -#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \ - (0x0 << FShft (DDAR_DS)) -#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \ - (0x1 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \ - (0x2 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \ - (0x3 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \ - (0x4 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \ - (0x5 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \ - (0x6 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \ - (0x7 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \ - (0x8 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \ - (0x9 << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \ - /* (audio) */ \ - (0xA << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \ - /* (audio) */ \ - (0xB << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \ - /* (telecom) */ \ - (0xC << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \ - /* (telecom) */ \ - (0xD << FShft (DDAR_DS)) -#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \ - (0xE << FShft (DDAR_DS)) -#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \ - (0xF << FShft (DDAR_DS)) -#define DDAR_DA Fld (24, 8) /* Device Address */ -#define DDAR_DevAdd(Add) /* Device Address */ \ - (((Add) & 0xF0000000) | \ - (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2))) -#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \ - /* (telecom) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \ - /* (telecom) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) - -#define DCSR_RUN 0x00000001 /* DMA RUNing */ -#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ -#define DCSR_ERROR 0x00000004 /* DMA ERROR */ -#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ -#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */ -#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */ -#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */ -#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */ -#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */ -#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */ - -#define DBT_TC Fld (13, 0) /* Transfer Count */ -#define DBTA_TCA DBT_TC /* Transfer Count buffer A */ -#define DBTB_TCB DBT_TC /* Transfer Count buffer B */ - - -/* - * Liquid Crystal Display (LCD) control registers - * - * Registers - * LCCR0 Liquid Crystal Display (LCD) Control Register 0 - * (read/write). - * [Bits LDM, BAM, and ERM are only implemented in - * versions 2.0 (rev. = 8) and higher of the StrongARM - * SA-1100.] - * LCSR Liquid Crystal Display (LCD) Status Register - * (read/write). - * [Bit LDD can be only read in versions 1.0 (rev. = 1) - * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be - * read and written (cleared) in versions 2.0 (rev. = 8) - * and higher.] - * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Base Address Register channel 1 (read/write). - * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Current Address Register channel 1 (read). - * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Base Address Register channel 2 (read/write). - * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Current Address Register channel 2 (read). - * LCCR1 Liquid Crystal Display (LCD) Control Register 1 - * (read/write). - * [The LCCR1 register can be only written in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it can be written and read in - * versions 2.0 (rev. = 8) and higher.] - * LCCR2 Liquid Crystal Display (LCD) Control Register 2 - * (read/write). - * [The LCCR1 register can be only written in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it can be written and read in - * versions 2.0 (rev. = 8) and higher.] - * LCCR3 Liquid Crystal Display (LCD) Control Register 3 - * (read/write). - * [The LCCR1 register can be only written in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it can be written and read in - * versions 2.0 (rev. = 8) and higher. Bit PCP is only - * implemented in versions 2.0 (rev. = 8) and higher of - * the StrongARM SA-1100.] - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - * fpix, Tpix Frequency, period of the pixel clock. - * fln, Tln Frequency, period of the line clock. - * fac, Tac Frequency, period of the AC bias clock. - */ - -#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */ -#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \ - /* [byte] */ \ - (16*LCD_PEntrySp) -#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \ - /* [byte] */ \ - (256*LCD_PEntrySp) -#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \ - /* dummy-Palette Space [byte] */ \ - (16*LCD_PEntrySp) - -#define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */ -#define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */ -#define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */ -#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */ -#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */ -#define LCD_4Bit /* LCD 4-Bit pixel mode */ \ - (0 << FShft (LCD_PBS)) -#define LCD_8Bit /* LCD 8-Bit pixel mode */ \ - (1 << FShft (LCD_PBS)) -#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \ - (2 << FShft (LCD_PBS)) - -#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */ -#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */ -#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */ -#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */ -#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */ -#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */ -#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */ -#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */ -#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */ -#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */ -#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */ -#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */ -#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */ -#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */ -#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */ -#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ - /* (Alternative) */ - -#define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */ -#define LCSR __REG(0xB0100004) /* LCD Status Reg. */ -#define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */ -#define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */ -#define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */ -#define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */ -#define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */ -#define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */ -#define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */ - -#define LCCR0_LEN 0x00000001 /* LCD ENable */ -#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */ - /* Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ -#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */ - /* interrupt Mask (disable) */ -#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */ - /* interrupt Mask (disable) */ -#define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */ - /* IUU, OOL, OUL, OOU, and OUU) */ - /* interrupt Mask (disable) */ -#define LCCR0_PAS 0x00000080 /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */ -#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */ -#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */ -#define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */ - /* display mode) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ - /* display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ - /* display */ -#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */ - /* [Tmem] */ -#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \ - /* [0..510 Tcpu] */ \ - ((Tcpu)/2 << FShft (LCCR0_PDD)) - -#define LCSR_LDD 0x00000001 /* LCD Disable Done */ -#define LCSR_BAU 0x00000002 /* Base Address Update (read) */ -#define LCSR_BER 0x00000004 /* Bus ERror */ -#define LCSR_ABC 0x00000008 /* AC Bias clock Count */ -#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */ - /* panel */ -#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */ - /* panel */ -#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */ - /* panel */ -#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */ - /* panel */ -#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */ - /* panel */ -#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */ - /* panel */ -#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */ - /* panel */ -#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */ - /* panel */ - -#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \ - (((Pixel) - 16)/16 << FShft (LCCR1_PPL)) -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ - /* pulse Width - 1 [Tpix] (L_LCLK) */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_HSW)) -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_ELW)) -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_BLW)) - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ - (((Line) - 1) << FShft (LCCR2_LPP)) -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ - (((Tln) - 1) << FShft (LCCR2_VSW)) -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_EFW)) -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_BFW)) - -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */ - /* [1..255] (L_PCLK) */ - /* fpix = fcpu/(2*(PCD + 2)) */ - /* Tpix = 2*(PCD + 2)*Tcpu */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \ - (((Div) - 4)/2 << FShft (LCCR3_PCD)) - /* fpix = fcpu/(2*Floor (Div/2)) */ - /* Tpix = 2*Floor (Div/2)*Tcpu */ -#define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \ - (((Div) - 3)/2 << FShft (LCCR3_PCD)) - /* fpix = fcpu/(2*Ceil (Div/2)) */ - /* Tpix = 2*Ceil (Div/2)*Tcpu */ -#define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */ - /* [Tln] (L_BIAS) */ -#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \ - (((Div) - 2)/2 << FShft (LCCR3_ACB)) - /* fac = fln/(2*Floor (Div/2)) */ - /* Tac = 2*Floor (Div/2)*Tln */ -#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \ - (((Div) - 1)/2 << FShft (LCCR3_ACB)) - /* fac = fln/(2*Ceil (Div/2)) */ - /* Tac = 2*Ceil (Div/2)*Tln */ -#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */ - /* Interrupt */ -#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \ - /* Off */ \ - (0 << FShft (LCCR3_API)) -#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \ - /* [1..15] */ \ - ((Trans) << FShft (LCCR3_API)) -#define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */ - /* Polarity (L_FCLK) */ -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ -#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */ - /* pulse Polarity (L_LCLK) */ -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ - /* pulse active Low */ -#define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ -#define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */ - /* active display mode) */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - -#ifndef __ASSEMBLY__ -extern unsigned int processor_id; -#endif - -#define CPU_REVISION (processor_id & 15) -#define CPU_SA1110_A0 (0) -#define CPU_SA1110_B0 (4) -#define CPU_SA1110_B1 (5) -#define CPU_SA1110_B2 (6) -#define CPU_SA1110_B4 (8) - -#define CPU_SA1100_ID (0x4401a110) -#define CPU_SA1100_MASK (0xfffffff0) -#define CPU_SA1110_ID (0x6901b110) -#define CPU_SA1110_MASK (0xfffffff0) diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/include/asm-arm/arch-sa1100/SA-1101.h deleted file mode 100644 index 65ca8c79e6d..00000000000 --- a/include/asm-arm/arch-sa1100/SA-1101.h +++ /dev/null @@ -1,925 +0,0 @@ -/* - * SA-1101.h - * - * Copyright (c) Peter Danielsson 1999 - * - * Definition of constants related to the sa1101 - * support chip for the sa1100 - * - */ - - -/* Be sure that virtual mapping is defined right */ -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not SA-1101.h -#endif - -#ifndef SA1101_BASE -#error You must define SA-1101 physical base address -#endif - -#ifndef LANGUAGE -# ifdef __ASSEMBLY__ -# define LANGUAGE Assembly -# else -# define LANGUAGE C -# endif -#endif - -/* - * We have mapped the sa1101 depending on the value of SA1101_BASE. - * It then appears from 0xf4000000. - */ - -#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000) -#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE) - -#ifndef SA1101_p2v -#define SA1101_p2v(PhAdd) (PhAdd) -#endif - -#include - -#define C 0 -#define Assembly 1 - - -/* - * Memory map - */ - -#define __SHMEM_CONTROL0 0x00000000 -#define __SYSTEM_CONTROL1 0x00000400 -#define __ARBITER 0x00020000 -#define __SYSTEM_CONTROL2 0x00040000 -#define __SYSTEM_CONTROL3 0x00060000 -#define __PARALLEL_PORT 0x00080000 -#define __VIDMEM_CONTROL 0x00100000 -#define __UPDATE_FIFO 0x00120000 -#define __SHMEM_CONTROL1 0x00140000 -#define __INTERRUPT_CONTROL 0x00160000 -#define __USB_CONTROL 0x00180000 -#define __TRACK_INTERFACE 0x001a0000 -#define __MOUSE_INTERFACE 0x001b0000 -#define __KEYPAD_INTERFACE 0x001c0000 -#define __PCMCIA_INTERFACE 0x001e0000 -#define __VGA_CONTROL 0x00200000 -#define __GPIO_INTERFACE 0x00300000 - -/* - * Macro that calculates real address for registers in the SA-1101 - */ - -#define _SA1101( x ) ((x) + SA1101_BASE) - -/* - * Interface and shared memory controller registers - * - * Registers - * SKCR SA-1101 control register (read/write) - * SMCR Shared Memory Controller Register - * SNPR Snoop Register - */ - -#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */ -#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */ -#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */ - -#if LANGUAGE == C -#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR))) -#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR))) -#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR))) - -#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */ -#define SKCR_BCLKEn 0x0002 /* Enables BCLK */ -#define SKCR_Sleep 0x0004 /* Sleep Mode */ -#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */ -#define SKCR_VCOON 0x0010 /* VCO bias */ -#define SKCR_ScanTestEn 0x0020 /* Enables scan test */ -#define SKCR_ClockTestEn 0x0040 /* Enables clock test */ - -#define SMCR_DCAC Fld(2,0) /* Number of column address bits */ -#define SMCR_DRAC Fld(2,2) /* Number of row address bits */ -#define SMCR_ArbiterBias 0x0008 /* favor video or USB */ -#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */ - -#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \ - (( (x) - 8 ) << FShft (SMCR_DCAC)) -#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\ - (( (x) - 9 ) << FShft (SMCR_DRAC)) - -#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */ -#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */ -#define SNPR_WholeBank (1 << 23) /* Whole bank bit */ -#define SNPR_BankSelect Fld(2,27) /* Bank select */ -#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */ - -#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \ - ( (x) << FShft (SNPR_VFBsize)) -#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \ - (( (x) + 1 ) << FShft (SNPR_BankSelect )) - -#endif /* LANGUAGE == C */ - -/* - * Video Memory Controller - * - * Registers - * VMCCR Configuration register - * VMCAR VMC address register - * VMCDR VMC data register - * - */ - -#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */ -#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */ -#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */ - -#if LANGUAGE == C -#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR))) -#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR))) -#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR))) - -#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */ -#define VMCCR_Config 0x0001 /* DRAM size */ -#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */ -#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */ -#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/ -#define VMCCR_RefTest (1<<10) /* refresh test */ -#define VMCCR_RefLow Fld(6,11) /* refresh low counter */ -#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */ -#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */ -#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */ - -#endif LANGUAGE == C - - -/* Update FIFO - * - * Registers - * UFCR Update FIFO Control Register - * UFSR Update FIFO Status Register - * UFLVLR update FIFO level register - * UFDR update FIFO data register - */ - -#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */ -#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */ -#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */ -#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */ - -#if LANGUAGE == C - -#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR))) -#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR))) -#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR))) -#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR))) - - -#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */ - -#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */ - -#endif /* LANGUAGE == C */ - -/* System Controller - * - * Registers - * SKPCR Power Control Register - * SKCDR Clock Divider Register - * DACDR1 DAC1 Data register - * DACDR2 DAC2 Data register - */ - -#define _SKPCR _SA1101(0x00000400) -#define _SKCDR _SA1101(0x00040000) -#define _DACDR1 _SA1101(0x00060000) -#define _DACDR2 _SA1101(0x00060400) - -#if LANGUAGE == C -#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR))) -#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR))) -#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1))) -#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2))) - -#define SKPCR_UCLKEn 0x01 /* USB Enable */ -#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */ -#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */ -#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */ -#define SKPCR_PICLKEn 0x10 /* parallel port Enable */ -#define SKPCR_DCLKEn 0x20 /* DACs Enable */ -#define SKPCR_nKPADEn 0x40 /* Multiplexer */ - -#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */ -#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */ -#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */ -#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */ -#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */ -#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */ -#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */ -#define SKDCR_ChargePump (1<<25) /* Charge pump control */ -#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */ -#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */ -#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */ - -#define DACDR_DACCount Fld(8,0) /* Count value */ -#define DACDR1_DACCount DACDR_DACCount -#define DACDR2_DACCount DACDR_DACCount - -#endif /* LANGUAGE == C */ - -/* - * Parallel Port Interface - * - * Registers - * IEEE_Config IEEE mode selection and programmable attributes - * IEEE_Control Controls the states of IEEE port control outputs - * IEEE_Data Forward transfer data register - * IEEE_Addr Forward transfer address register - * IEEE_Status Port IO signal status register - * IEEE_IntStatus Port interrupts status register - * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels - * IEEE_InitTime Forward timeout counter initial value - * IEEE_TimerStatus Forward timeout counter current value - * IEEE_FifoReset Reset forward transfer FIFO - * IEEE_ReloadValue Counter reload value - * IEEE_TestControl Control testmode - * IEEE_TestDataIn Test data register - * IEEE_TestDataInEn Enable test data - * IEEE_TestCtrlIn Test control signals - * IEEE_TestCtrlInEn Enable test control signals - * IEEE_TestDataStat Current data bus value - * - */ - -/* - * The control registers are defined as offsets from a base address - */ - -#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT ) - -#define _IEEE_Config _IEEE( 0x0000 ) -#define _IEEE_Control _IEEE( 0x0400 ) -#define _IEEE_Data _IEEE( 0x4000 ) -#define _IEEE_Addr _IEEE( 0x0800 ) -#define _IEEE_Status _IEEE( 0x0c00 ) -#define _IEEE_IntStatus _IEEE( 0x1000 ) -#define _IEEE_FifoLevels _IEEE( 0x1400 ) -#define _IEEE_InitTime _IEEE( 0x1800 ) -#define _IEEE_TimerStatus _IEEE( 0x1c00 ) -#define _IEEE_FifoReset _IEEE( 0x2000 ) -#define _IEEE_ReloadValue _IEEE( 0x3c00 ) -#define _IEEE_TestControl _IEEE( 0x2400 ) -#define _IEEE_TestDataIn _IEEE( 0x2800 ) -#define _IEEE_TestDataInEn _IEEE( 0x2c00 ) -#define _IEEE_TestCtrlIn _IEEE( 0x3000 ) -#define _IEEE_TestCtrlInEn _IEEE( 0x3400 ) -#define _IEEE_TestDataStat _IEEE( 0x3800 ) - - -#if LANGUAGE == C -#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config))) -#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control))) -#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data))) -#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr))) -#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status))) -#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus))) -#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels))) -#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime))) -#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus))) -#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset))) -#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue))) -#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl))) -#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn))) -#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn))) -#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn))) -#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn))) -#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat))) - - -#define IEEE_Config_M Fld(3,0) /* Mode select */ -#define IEEE_Config_D 0x04 /* FIFO access enable */ -#define IEEE_Config_B 0x08 /* 9-bit word enable */ -#define IEEE_Config_T 0x10 /* Data transfer enable */ -#define IEEE_Config_A 0x20 /* Data transfer direction */ -#define IEEE_Config_E 0x40 /* Timer enable */ -#define IEEE_Control_A 0x08 /* AutoFd output */ -#define IEEE_Control_E 0x04 /* Selectin output */ -#define IEEE_Control_T 0x02 /* Strobe output */ -#define IEEE_Control_I 0x01 /* Port init output */ -#define IEEE_Data_C (1<<31) /* Byte count */ -#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */ -#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */ -#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */ -#define IEEE_Status_A 0x0100 /* nAutoFd port output status */ -#define IEEE_Status_E 0x0080 /* nSelectIn port output status */ -#define IEEE_Status_T 0x0040 /* nStrobe port output status */ -#define IEEE_Status_I 0x0020 /* nInit port output status */ -#define IEEE_Status_B 0x0010 /* Busy port inout status */ -#define IEEE_Status_S 0x0008 /* Select port input status */ -#define IEEE_Status_K 0x0004 /* nAck port input status */ -#define IEEE_Status_F 0x0002 /* nFault port input status */ -#define IEEE_Status_R 0x0001 /* pError port input status */ - -#define IEEE_IntStatus_IntReqDat 0x0100 -#define IEEE_IntStatus_IntReqEmp 0x0080 -#define IEEE_IntStatus_IntReqInt 0x0040 -#define IEEE_IntStatus_IntReqRav 0x0020 -#define IEEE_IntStatus_IntReqTim 0x0010 -#define IEEE_IntStatus_RevAddrComp 0x0008 -#define IEEE_IntStatus_RevDataComp 0x0004 -#define IEEE_IntStatus_FwdAddrComp 0x0002 -#define IEEE_IntStatus_FwdDataComp 0x0001 -#define IEEE_FifoLevels_RevFifoLevel 2 -#define IEEE_FifoLevels_FwdFifoLevel 1 -#define IEEE_InitTime_TimValInit Fld(22,0) -#define IEEE_TimerStatus_TimValStat Fld(22,0) -#define IEEE_ReloadValue_Reload Fld(4,0) - -#define IEEE_TestControl_RegClk 0x04 -#define IEEE_TestControl_ClockSelect Fld(2,1) -#define IEEE_TestControl_TimerTestModeEn 0x01 -#define IEEE_TestCtrlIn_PError 0x10 -#define IEEE_TestCtrlIn_nFault 0x08 -#define IEEE_TestCtrlIn_nAck 0x04 -#define IEEE_TestCtrlIn_PSel 0x02 -#define IEEE_TestCtrlIn_Busy 0x01 - -#endif /* LANGUAGE == C */ - -/* - * VGA Controller - * - * Registers - * VideoControl Video Control Register - * VgaTiming0 VGA Timing Register 0 - * VgaTiming1 VGA Timing Register 1 - * VgaTiming2 VGA Timing Register 2 - * VgaTiming3 VGA Timing Register 3 - * VgaBorder VGA Border Color Register - * VgaDBAR VGADMA Base Address Register - * VgaDCAR VGADMA Channel Current Address Register - * VgaStatus VGA Status Register - * VgaInterruptMask VGA Interrupt Mask Register - * VgaPalette VGA Palette Registers - * DacControl DAC Control Register - * VgaTest VGA Controller Test Register - */ - -#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL ) - -#define _VideoControl _VGA( 0x0000 ) -#define _VgaTiming0 _VGA( 0x0400 ) -#define _VgaTiming1 _VGA( 0x0800 ) -#define _VgaTiming2 _VGA( 0x0c00 ) -#define _VgaTiming3 _VGA( 0x1000 ) -#define _VgaBorder _VGA( 0x1400 ) -#define _VgaDBAR _VGA( 0x1800 ) -#define _VgaDCAR _VGA( 0x1c00 ) -#define _VgaStatus _VGA( 0x2000 ) -#define _VgaInterruptMask _VGA( 0x2400 ) -#define _VgaPalette _VGA( 0x40000 ) -#define _DacControl _VGA( 0x3000 ) -#define _VgaTest _VGA( 0x2c00 ) - -#if (LANGUAGE == C) -#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl))) -#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0))) -#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1))) -#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2))) -#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3))) -#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder))) -#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR))) -#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR))) -#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus))) -#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask))) -#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette))) -#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl))) -#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest))) - -#define VideoControl_VgaEn 0x00000000 -#define VideoControl_BGR 0x00000001 -#define VideoControl_VCompVal Fld(2,2) -#define VideoControl_VgaReq Fld(4,4) -#define VideoControl_VBurstL Fld(4,8) -#define VideoControl_VMode (1<<12) -#define VideoControl_PalRead (1<<13) - -#define VgaTiming0_PPL Fld(6,2) -#define VgaTiming0_HSW Fld(8,8) -#define VgaTiming0_HFP Fld(8,16) -#define VgaTiming0_HBP Fld(8,24) - -#define VgaTiming1_LPS Fld(10,0) -#define VgaTiming1_VSW Fld(6,10) -#define VgaTiming1_VFP Fld(8,16) -#define VgaTiming1_VBP Fld(8,24) - -#define VgaTiming2_IVS 0x01 -#define VgaTiming2_IHS 0x02 -#define VgaTiming2_CVS 0x04 -#define VgaTiming2_CHS 0x08 - -#define VgaTiming3_HBS Fld(8,0) -#define VgaTiming3_HBE Fld(8,8) -#define VgaTiming3_VBS Fld(8,16) -#define VgaTiming3_VBE Fld(8,24) - -#define VgaBorder_BCOL Fld(24,0) - -#define VgaStatus_VFUF 0x01 -#define VgaStatus_VNext 0x02 -#define VgaStatus_VComp 0x04 - -#define VgaInterruptMask_VFUFMask 0x00 -#define VgaInterruptMask_VNextMask 0x01 -#define VgaInterruptMask_VCompMask 0x02 - -#define VgaPalette_R Fld(8,0) -#define VgaPalette_G Fld(8,8) -#define VgaPalette_B Fld(8,16) - -#define DacControl_DACON 0x0001 -#define DacControl_COMPON 0x0002 -#define DacControl_PEDON 0x0004 -#define DacControl_RTrim Fld(5,4) -#define DacControl_GTrim Fld(5,9) -#define DacControl_BTrim Fld(5,14) - -#define VgaTest_TDAC 0x00 -#define VgaTest_Datatest Fld(4,1) -#define VgaTest_DACTESTDAC 0x10 -#define VgaTest_DACTESTOUT Fld(3,5) - -#endif /* LANGUAGE == C */ - -/* - * USB Host Interface Controller - * - * Registers - * Revision - * Control - * CommandStatus - * InterruptStatus - * InterruptEnable - * HCCA - * PeriodCurrentED - * ControlHeadED - * BulkHeadED - * BulkCurrentED - * DoneHead - * FmInterval - * FmRemaining - * FmNumber - * PeriodicStart - * LSThreshold - * RhDescriptorA - * RhDescriptorB - * RhStatus - * RhPortStatus - * USBStatus - * USBReset - * USTAR - * USWER - * USRFR - * USNFR - * USTCSR - * USSR - * - */ - -#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL ) - - -#define _Revision _USB( 0x0000 ) -#define _Control _USB( 0x0888 ) -#define _CommandStatus _USB( 0x0c00 ) -#define _InterruptStatus _USB( 0x1000 ) -#define _InterruptEnable _USB( 0x1400 ) -#define _HCCA _USB( 0x1800 ) -#define _PeriodCurrentED _USB( 0x1c00 ) -#define _ControlHeadED _USB( 0x2000 ) -#define _BulkHeadED _USB( 0x2800 ) -#define _BulkCurrentED _USB( 0x2c00 ) -#define _DoneHead _USB( 0x3000 ) -#define _FmInterval _USB( 0x3400 ) -#define _FmRemaining _USB( 0x3800 ) -#define _FmNumber _USB( 0x3c00 ) -#define _PeriodicStart _USB( 0x4000 ) -#define _LSThreshold _USB( 0x4400 ) -#define _RhDescriptorA _USB( 0x4800 ) -#define _RhDescriptorB _USB( 0x4c00 ) -#define _RhStatus _USB( 0x5000 ) -#define _RhPortStatus _USB( 0x5400 ) -#define _USBStatus _USB( 0x11800 ) -#define _USBReset _USB( 0x11c00 ) - -#define _USTAR _USB( 0x10400 ) -#define _USWER _USB( 0x10800 ) -#define _USRFR _USB( 0x10c00 ) -#define _USNFR _USB( 0x11000 ) -#define _USTCSR _USB( 0x11400 ) -#define _USSR _USB( 0x11800 ) - - -#if (LANGUAGE == C) - -#define Revision (*((volatile Word *) SA1101_p2v (_Revision))) -#define Control (*((volatile Word *) SA1101_p2v (_Control))) -#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus))) -#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus))) -#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable))) -#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA))) -#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED))) -#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED))) -#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED))) -#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED))) -#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead))) -#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval))) -#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining))) -#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber))) -#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart))) -#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold))) -#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA))) -#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB))) -#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus))) -#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus))) -#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus))) -#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset))) -#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR))) -#define USWER (*((volatile Word *) SA1101_p2v (_USWER))) -#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR))) -#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR))) -#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR))) -#define USSR (*((volatile Word *) SA1101_p2v (_USSR))) - - -#define USBStatus_IrqHciRmtWkp (1<<7) -#define USBStatus_IrqHciBuffAcc (1<<8) -#define USBStatus_nIrqHciM (1<<9) -#define USBStatus_nHciMFClr (1<<10) - -#define USBReset_ForceIfReset 0x01 -#define USBReset_ForceHcReset 0x02 -#define USBReset_ClkGenReset 0x04 - -#define USTCR_RdBstCntrl Fld(3,0) -#define USTCR_ByteEnable Fld(4,3) -#define USTCR_WriteEn (1<<7) -#define USTCR_FifoCir (1<<8) -#define USTCR_TestXferSel (1<<9) -#define USTCR_FifoCirAtEnd (1<<10) -#define USTCR_nSimScaleDownClk (1<<11) - -#define USSR_nAppMDEmpty 0x01 -#define USSR_nAppMDFirst 0x02 -#define USSR_nAppMDLast 0x04 -#define USSR_nAppMDFull 0x08 -#define USSR_nAppMAFull 0x10 -#define USSR_XferReq 0x20 -#define USSR_XferEnd 0x40 - -#endif /* LANGUAGE == C */ - - -/* - * Interrupt Controller - * - * Registers - * INTTEST0 Test register 0 - * INTTEST1 Test register 1 - * INTENABLE0 Interrupt Enable register 0 - * INTENABLE1 Interrupt Enable register 1 - * INTPOL0 Interrupt Polarity selection 0 - * INTPOL1 Interrupt Polarity selection 1 - * INTTSTSEL Interrupt source selection - * INTSTATCLR0 Interrupt Status 0 - * INTSTATCLR1 Interrupt Status 1 - * INTSET0 Interrupt Set 0 - * INTSET1 Interrupt Set 1 - */ - -#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL) - -#define _INTTEST0 _INT( 0x1000 ) -#define _INTTEST1 _INT( 0x1400 ) -#define _INTENABLE0 _INT( 0x2000 ) -#define _INTENABLE1 _INT( 0x2400 ) -#define _INTPOL0 _INT( 0x3000 ) -#define _INTPOL1 _INT( 0x3400 ) -#define _INTTSTSEL _INT( 0x5000 ) -#define _INTSTATCLR0 _INT( 0x6000 ) -#define _INTSTATCLR1 _INT( 0x6400 ) -#define _INTSET0 _INT( 0x7000 ) -#define _INTSET1 _INT( 0x7400 ) - -#if ( LANGUAGE == C ) -#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0))) -#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1))) -#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0))) -#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1))) -#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0))) -#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1))) -#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL))) -#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0))) -#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1))) -#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0))) -#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1))) - -#endif /* LANGUAGE == C */ - -/* - * PS/2 Trackpad and Mouse Interfaces - * - * Registers (prefix kbd applies to trackpad interface, mse to mouse) - * KBDCR Control Register - * KBDSTAT Status Register - * KBDDATA Transmit/Receive Data register - * KBDCLKDIV Clock Division Register - * KBDPRECNT Clock Precount Register - * KBDTEST1 Test register 1 - * KBDTEST2 Test register 2 - * KBDTEST3 Test register 3 - * KBDTEST4 Test register 4 - * MSECR - * MSESTAT - * MSEDATA - * MSECLKDIV - * MSEPRECNT - * MSETEST1 - * MSETEST2 - * MSETEST3 - * MSETEST4 - * - */ - -#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE ) -#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE ) - -#define _KBDCR _KBD( 0x0000 ) -#define _KBDSTAT _KBD( 0x0400 ) -#define _KBDDATA _KBD( 0x0800 ) -#define _KBDCLKDIV _KBD( 0x0c00 ) -#define _KBDPRECNT _KBD( 0x1000 ) -#define _KBDTEST1 _KBD( 0x2000 ) -#define _KBDTEST2 _KBD( 0x2400 ) -#define _KBDTEST3 _KBD( 0x2800 ) -#define _KBDTEST4 _KBD( 0x2c00 ) -#define _MSECR _MSE( 0x0000 ) -#define _MSESTAT _MSE( 0x0400 ) -#define _MSEDATA _MSE( 0x0800 ) -#define _MSECLKDIV _MSE( 0x0c00 ) -#define _MSEPRECNT _MSE( 0x1000 ) -#define _MSETEST1 _MSE( 0x2000 ) -#define _MSETEST2 _MSE( 0x2400 ) -#define _MSETEST3 _MSE( 0x2800 ) -#define _MSETEST4 _MSE( 0x2c00 ) - -#if ( LANGUAGE == C ) - -#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR))) -#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT))) -#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA))) -#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV))) -#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT))) -#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1))) -#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2))) -#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3))) -#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4))) -#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR))) -#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT))) -#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA))) -#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV))) -#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT))) -#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1))) -#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2))) -#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3))) -#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4))) - - -#define KBDCR_ENA 0x08 -#define KBDCR_FKD 0x02 -#define KBDCR_FKC 0x01 - -#define KBDSTAT_TXE 0x80 -#define KBDSTAT_TXB 0x40 -#define KBDSTAT_RXF 0x20 -#define KBDSTAT_RXB 0x10 -#define KBDSTAT_ENA 0x08 -#define KBDSTAT_RXP 0x04 -#define KBDSTAT_KBD 0x02 -#define KBDSTAT_KBC 0x01 - -#define KBDCLKDIV_DivVal Fld(4,0) - -#define MSECR_ENA 0x08 -#define MSECR_FKD 0x02 -#define MSECR_FKC 0x01 - -#define MSESTAT_TXE 0x80 -#define MSESTAT_TXB 0x40 -#define MSESTAT_RXF 0x20 -#define MSESTAT_RXB 0x10 -#define MSESTAT_ENA 0x08 -#define MSESTAT_RXP 0x04 -#define MSESTAT_MSD 0x02 -#define MSESTAT_MSC 0x01 - -#define MSECLKDIV_DivVal Fld(4,0) - -#define KBDTEST1_CD 0x80 -#define KBDTEST1_RC1 0x40 -#define KBDTEST1_MC 0x20 -#define KBDTEST1_C Fld(2,3) -#define KBDTEST1_T2 0x40 -#define KBDTEST1_T1 0x20 -#define KBDTEST1_T0 0x10 -#define KBDTEST2_TICBnRES 0x08 -#define KBDTEST2_RKC 0x04 -#define KBDTEST2_RKD 0x02 -#define KBDTEST2_SEL 0x01 -#define KBDTEST3_ms_16 0x80 -#define KBDTEST3_us_64 0x40 -#define KBDTEST3_us_16 0x20 -#define KBDTEST3_DIV8 0x10 -#define KBDTEST3_DIn 0x08 -#define KBDTEST3_CIn 0x04 -#define KBDTEST3_KD 0x02 -#define KBDTEST3_KC 0x01 -#define KBDTEST4_BC12 0x80 -#define KBDTEST4_BC11 0x40 -#define KBDTEST4_TRES 0x20 -#define KBDTEST4_CLKOE 0x10 -#define KBDTEST4_CRES 0x08 -#define KBDTEST4_RXB 0x04 -#define KBDTEST4_TXB 0x02 -#define KBDTEST4_SRX 0x01 - -#define MSETEST1_CD 0x80 -#define MSETEST1_RC1 0x40 -#define MSETEST1_MC 0x20 -#define MSETEST1_C Fld(2,3) -#define MSETEST1_T2 0x40 -#define MSETEST1_T1 0x20 -#define MSETEST1_T0 0x10 -#define MSETEST2_TICBnRES 0x08 -#define MSETEST2_RKC 0x04 -#define MSETEST2_RKD 0x02 -#define MSETEST2_SEL 0x01 -#define MSETEST3_ms_16 0x80 -#define MSETEST3_us_64 0x40 -#define MSETEST3_us_16 0x20 -#define MSETEST3_DIV8 0x10 -#define MSETEST3_DIn 0x08 -#define MSETEST3_CIn 0x04 -#define MSETEST3_KD 0x02 -#define MSETEST3_KC 0x01 -#define MSETEST4_BC12 0x80 -#define MSETEST4_BC11 0x40 -#define MSETEST4_TRES 0x20 -#define MSETEST4_CLKOE 0x10 -#define MSETEST4_CRES 0x08 -#define MSETEST4_RXB 0x04 -#define MSETEST4_TXB 0x02 -#define MSETEST4_SRX 0x01 - -#endif /* LANGUAGE == C */ - - -/* - * General-Purpose I/O Interface - * - * Registers - * PADWR Port A Data Write Register - * PBDWR Port B Data Write Register - * PADRR Port A Data Read Register - * PBDRR Port B Data Read Register - * PADDR Port A Data Direction Register - * PBDDR Port B Data Direction Register - * PASSR Port A Sleep State Register - * PBSSR Port B Sleep State Register - * - */ - -#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE ) - -#define _PADWR _PIO( 0x0000 ) -#define _PBDWR _PIO( 0x0400 ) -#define _PADRR _PIO( 0x0000 ) -#define _PBDRR _PIO( 0x0400 ) -#define _PADDR _PIO( 0x0800 ) -#define _PBDDR _PIO( 0x0c00 ) -#define _PASSR _PIO( 0x1000 ) -#define _PBSSR _PIO( 0x1400 ) - - -#if ( LANGUAGE == C ) - - -#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR))) -#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR))) -#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR))) -#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR))) -#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR))) -#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR))) -#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR))) -#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR))) - -#endif - - - -/* - * Keypad Interface - * - * Registers - * PXDWR - * PXDRR - * PYDWR - * PYDRR - * - */ - -#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE ) - -#define _PXDWR _KEYPAD( 0x0000 ) -#define _PXDRR _KEYPAD( 0x0000 ) -#define _PYDWR _KEYPAD( 0x0400 ) -#define _PYDRR _KEYPAD( 0x0400 ) - -#if ( LANGUAGE == C ) - - -#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR))) -#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR))) -#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR))) -#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR))) - -#endif - - - -/* - * PCMCIA Interface - * - * Registers - * PCSR Status Register - * PCCR Control Register - * PCSSR Sleep State Register - * - */ - -#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE ) - -#define _PCSR _CARD( 0x0000 ) -#define _PCCR _CARD( 0x0400 ) -#define _PCSSR _CARD( 0x0800 ) - -#if ( LANGUAGE == C ) -#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR))) -#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR))) -#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR))) - -#define PCSR_S0_ready 0x0001 -#define PCSR_S1_ready 0x0002 -#define PCSR_S0_detected 0x0004 -#define PCSR_S1_detected 0x0008 -#define PCSR_S0_VS1 0x0010 -#define PCSR_S0_VS2 0x0020 -#define PCSR_S1_VS1 0x0040 -#define PCSR_S1_VS2 0x0080 -#define PCSR_S0_WP 0x0100 -#define PCSR_S1_WP 0x0200 -#define PCSR_S0_BVD1_nSTSCHG 0x0400 -#define PCSR_S0_BVD2_nSPKR 0x0800 -#define PCSR_S1_BVD1_nSTSCHG 0x1000 -#define PCSR_S1_BVD2_nSPKR 0x2000 - -#define PCCR_S0_VPP0 0x0001 -#define PCCR_S0_VPP1 0x0002 -#define PCCR_S0_VCC0 0x0004 -#define PCCR_S0_VCC1 0x0008 -#define PCCR_S1_VPP0 0x0010 -#define PCCR_S1_VPP1 0x0020 -#define PCCR_S1_VCC0 0x0040 -#define PCCR_S1_VCC1 0x0080 -#define PCCR_S0_reset 0x0100 -#define PCCR_S1_reset 0x0200 -#define PCCR_S0_float 0x0400 -#define PCCR_S1_float 0x0800 - -#define PCSSR_S0_VCC0 0x0001 -#define PCSSR_S0_VCC1 0x0002 -#define PCSSR_S0_VPP0 0x0004 -#define PCSSR_S0_VPP1 0x0008 -#define PCSSR_S0_control 0x0010 -#define PCSSR_S1_VCC0 0x0020 -#define PCSSR_S1_VCC1 0x0040 -#define PCSSR_S1_VPP0 0x0080 -#define PCSSR_S1_VPP1 0x0100 -#define PCSSR_S1_control 0x0200 - -#endif - -#undef C -#undef Assembly diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/include/asm-arm/arch-sa1100/SA-1111.h deleted file mode 100644 index c38f60915cb..00000000000 --- a/include/asm-arm/arch-sa1100/SA-1111.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * Moved to new location - */ -#warning using old SA-1111.h - update to -#include diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h deleted file mode 100644 index d6a1bb5b494..00000000000 --- a/include/asm-arm/arch-sa1100/assabet.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/assabet.h - * - * Created 2000/06/05 by Nicolas Pitre - * - * This file contains the hardware specific definitions for Assabet - * Only include this file from SA1100-specific files. - * - * 2000/05/23 John Dorsey - * Definitions for Neponset added. - */ -#ifndef __ASM_ARCH_ASSABET_H -#define __ASM_ARCH_ASSABET_H - - -/* System Configuration Register flags */ - -#define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */ -#define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */ -#define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */ -#define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */ -#define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */ -#define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */ - -#define ASSABET_SCR_INIT -1 - -extern unsigned long SCR_value; - -#ifdef CONFIG_ASSABET_NEPONSET -#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0) -#else -#define machine_has_neponset() (0) -#endif - -/* Board Control Register */ - -#define ASSABET_BCR_BASE 0xf1000000 -#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE)) - -#define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */ -#define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */ -#define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */ -#define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */ -#define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */ -#define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */ -#define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */ -#define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */ -#define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */ -#define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */ -#define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */ -#define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */ -#define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */ -#define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */ -#define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */ -#define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */ -#define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */ -#define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */ -#define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */ -#define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */ -#define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */ -#define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */ -#define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */ -#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */ -#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */ - -#ifdef CONFIG_SA1100_ASSABET -extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set); -#else -#define ASSABET_BCR_frob(x,y) do { } while (0) -#endif - -#define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x)) -#define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0) - -#define ASSABET_BSR_BASE 0xf1000000 -#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE)) - -#define ASSABET_BSR_RS232_VALID (1 << 24) -#define ASSABET_BSR_COM_DCD (1 << 25) -#define ASSABET_BSR_COM_CTS (1 << 26) -#define ASSABET_BSR_COM_DSR (1 << 27) -#define ASSABET_BSR_RAD_CTS (1 << 28) -#define ASSABET_BSR_RAD_DSR (1 << 29) -#define ASSABET_BSR_RAD_DCD (1 << 30) -#define ASSABET_BSR_RAD_RI (1 << 31) - - -/* GPIOs for which the generic definition doesn't say much */ -#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */ -#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */ -#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */ -#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */ -#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */ -#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */ -#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */ -#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */ -#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */ -#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */ - -#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21 -#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22 -#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24 -#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25 - -#endif diff --git a/include/asm-arm/arch-sa1100/badge4.h b/include/asm-arm/arch-sa1100/badge4.h deleted file mode 100644 index d93a9a83b25..00000000000 --- a/include/asm-arm/arch-sa1100/badge4.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/badge4.h - * - * Tim Connors - * Christopher Hoover - * - * Copyright (C) 2002 Hewlett-Packard Company - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#error "include instead" -#endif - -#define BADGE4_SA1111_BASE (0x48000000) - -/* GPIOs on the BadgePAD 4 */ -#define BADGE4_GPIO_INT_1111 GPIO_GPIO0 /* SA-1111 IRQ */ - -#define BADGE4_GPIO_INT_VID GPIO_GPIO1 /* Video expansion */ -#define BADGE4_GPIO_LGP2 GPIO_GPIO2 /* GPIO_LDD8 */ -#define BADGE4_GPIO_LGP3 GPIO_GPIO3 /* GPIO_LDD9 */ -#define BADGE4_GPIO_LGP4 GPIO_GPIO4 /* GPIO_LDD10 */ -#define BADGE4_GPIO_LGP5 GPIO_GPIO5 /* GPIO_LDD11 */ -#define BADGE4_GPIO_LGP6 GPIO_GPIO6 /* GPIO_LDD12 */ -#define BADGE4_GPIO_LGP7 GPIO_GPIO7 /* GPIO_LDD13 */ -#define BADGE4_GPIO_LGP8 GPIO_GPIO8 /* GPIO_LDD14 */ -#define BADGE4_GPIO_LGP9 GPIO_GPIO9 /* GPIO_LDD15 */ -#define BADGE4_GPIO_GPA_VID GPIO_GPIO10 /* Video expansion */ -#define BADGE4_GPIO_GPB_VID GPIO_GPIO11 /* Video expansion */ -#define BADGE4_GPIO_GPC_VID GPIO_GPIO12 /* Video expansion */ - -#define BADGE4_GPIO_UART_HS1 GPIO_GPIO13 -#define BADGE4_GPIO_UART_HS2 GPIO_GPIO14 - -#define BADGE4_GPIO_MUXSEL0 GPIO_GPIO15 -#define BADGE4_GPIO_TESTPT_J7 GPIO_GPIO16 - -#define BADGE4_GPIO_SDSDA GPIO_GPIO17 /* SDRAM SPD Data */ -#define BADGE4_GPIO_SDSCL GPIO_GPIO18 /* SDRAM SPD Clock */ -#define BADGE4_GPIO_SDTYP0 GPIO_GPIO19 /* SDRAM Type Control */ -#define BADGE4_GPIO_SDTYP1 GPIO_GPIO20 /* SDRAM Type Control */ - -#define BADGE4_GPIO_BGNT_1111 GPIO_GPIO21 /* GPIO_MBGNT */ -#define BADGE4_GPIO_BREQ_1111 GPIO_GPIO22 /* GPIO_TREQA */ - -#define BADGE4_GPIO_TESTPT_J6 GPIO_GPIO23 - -#define BADGE4_GPIO_PCMEN5V GPIO_GPIO24 /* 5V power */ - -#define BADGE4_GPIO_SA1111_NRST GPIO_GPIO25 /* SA-1111 nRESET */ - -#define BADGE4_GPIO_TESTPT_J5 GPIO_GPIO26 - -#define BADGE4_GPIO_CLK_1111 GPIO_GPIO27 /* GPIO_32_768kHz */ - -/* Interrupts on the BadgePAD 4 */ -#define BADGE4_IRQ_GPIO_SA1111 IRQ_GPIO0 /* SA-1111 interrupt */ - - -/* PCM5ENV Usage tracking */ - -#define BADGE4_5V_PCMCIA_SOCK0 (1<<0) -#define BADGE4_5V_PCMCIA_SOCK1 (1<<1) -#define BADGE4_5V_PCMCIA_SOCK(n) (1<<(n)) -#define BADGE4_5V_USB (1<<2) -#define BADGE4_5V_INITIALLY (1<<3) - -#ifndef __ASSEMBLY__ -extern void badge4_set_5V(unsigned subsystem, int on); -#endif diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h deleted file mode 100644 index f1f0e3387d9..00000000000 --- a/include/asm-arm/arch-sa1100/bitfield.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * FILE bitfield.h - * - * Version 1.1 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date April 1998 (April 1997) - * System Advanced RISC Machine (ARM) - * Language C or ARM Assembly - * Purpose Definition of macros to operate on bit fields. - */ - - - -#ifndef __BITFIELD_H -#define __BITFIELD_H - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - - -/* - * MACRO: Fld - * - * Purpose - * The macro "Fld" encodes a bit field, given its size and its shift value - * with respect to bit 0. - * - * Note - * A more intuitive way to encode bit fields would have been to use their - * mask. However, extracting size and shift value information from a bit - * field's mask is cumbersome and might break the assembler (255-character - * line-size limit). - * - * Input - * Size Size of the bit field, in number of bits. - * Shft Shift value of the bit field with respect to bit 0. - * - * Output - * Fld Encoded bit field. - */ - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - - -/* - * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit - * - * Purpose - * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return - * the size, shift value, mask, aligned mask, and first bit of a - * bit field. - * - * Input - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FSize Size of the bit field, in number of bits. - * FShft Shift value of the bit field with respect to bit 0. - * FMsk Mask for the bit field. - * FAlnMsk Mask for the bit field, aligned on bit 0. - * F1stBit First bit of the bit field. - */ - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - - -/* - * MACRO: FInsrt - * - * Purpose - * The macro "FInsrt" inserts a value into a bit field by shifting the - * former appropriately. - * - * Input - * Value Bit-field value. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FInsrt Bit-field value positioned appropriately. - */ - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - - -/* - * MACRO: FExtr - * - * Purpose - * The macro "FExtr" extracts the value of a bit field by masking and - * shifting it appropriately. - * - * Input - * Data Data containing the bit-field to be extracted. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FExtr Bit-field value. - */ - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - - -#endif /* __BITFIELD_H */ diff --git a/include/asm-arm/arch-sa1100/cerf.h b/include/asm-arm/arch-sa1100/cerf.h deleted file mode 100644 index 9a19c3d07c1..00000000000 --- a/include/asm-arm/arch-sa1100/cerf.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-sa1100/cerf.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Apr-2003 : Removed some old PDA crud [FB] - */ -#ifndef _INCLUDE_CERF_H_ -#define _INCLUDE_CERF_H_ - - -#define CERF_ETH_IO 0xf0000000 -#define CERF_ETH_IRQ IRQ_GPIO26 - -#define CERF_GPIO_CF_BVD2 GPIO_GPIO (19) -#define CERF_GPIO_CF_BVD1 GPIO_GPIO (20) -#define CERF_GPIO_CF_RESET GPIO_GPIO (21) -#define CERF_GPIO_CF_IRQ GPIO_GPIO (22) -#define CERF_GPIO_CF_CD GPIO_GPIO (23) - -#define CERF_IRQ_GPIO_CF_BVD2 IRQ_GPIO19 -#define CERF_IRQ_GPIO_CF_BVD1 IRQ_GPIO20 -#define CERF_IRQ_GPIO_CF_IRQ IRQ_GPIO22 -#define CERF_IRQ_GPIO_CF_CD IRQ_GPIO23 - -#endif // _INCLUDE_CERF_H_ diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h deleted file mode 100644 index 762eba53581..00000000000 --- a/include/asm-arm/arch-sa1100/collie.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/collie.h - * - * This file contains the hardware specific definitions for Assabet - * Only include this file from SA1100-specific files. - * - * ChangeLog: - * 04-06-2001 Lineo Japan, Inc. - * 04-16-2001 SHARP Corporation - * 07-07-2002 Chris Larson - * - */ -#ifndef __ASM_ARCH_COLLIE_H -#define __ASM_ARCH_COLLIE_H - - -#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11 -#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12 -#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13 -#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14 -#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15 -#define COLLIE_SCP_5VON SCOOP_GPCR_PA16 -#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17 -#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18 -#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19 - -#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ - COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \ - COLLIE_SCP_LB_VOL_CHG ) -#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \ - COLLIE_SCP_CHARGE_ON ) - -/* GPIOs for which the generic definition doesn't say much */ - -#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0) -#define COLLIE_GPIO_AC_IN GPIO_GPIO (1) -#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11) -#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14) -#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15) -#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16) -#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17) -#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18) -#define COLLIE_GPIO_CO GPIO_GPIO (20) -#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21) -#define COLLIE_GPIO_CF_CD GPIO_GPIO (22) -#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23) -#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24) -#define COLLIE_GPIO_GA_INT GPIO_GPIO (25) -#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26) - -/* Interrupts */ - -#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0 -#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1 -#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11 -#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14 -#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15 -#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20 -#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22 -#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23 -#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24 -#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25 -#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26 - -#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0 -#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1 -#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2 -#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3 -#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13 -#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14 - -/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */ -#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */ -#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */ -#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */ -#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */ -#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */ -#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */ -#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */ -#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */ -#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */ -#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */ -#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */ -#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 ) -#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \ - UCB_IO_7 | UCB_IO_8 | UCB_IO_9 ) - -#endif diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S deleted file mode 100644 index 1b7753654bd..00000000000 --- a/include/asm-arm/arch-sa1100/debug-macro.S +++ /dev/null @@ -1,58 +0,0 @@ -/* linux/include/asm-arm/arch-sa1100/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - movne \rx, #0xf8000000 @ virtual address - - @ We probe for the active serial port here, coherently with - @ the comment in include/asm-arm/arch-sa1100/uncompress.h. - @ We assume r1 can be clobbered. - - @ see if Ser3 is active - add \rx, \rx, #0x00050000 - ldr r1, [\rx, #UTCR3] - tst r1, #UTCR3_TXE - - @ if Ser3 is inactive, then try Ser1 - addeq \rx, \rx, #(0x00010000 - 0x00050000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE - - @ if Ser1 is inactive, then try Ser2 - addeq \rx, \rx, #(0x00030000 - 0x00010000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE - - @ if all ports are inactive, then there is nothing we can do - moveq pc, lr - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UTDR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TNF - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TBY - bne 1001b - .endm diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h deleted file mode 100644 index 6b7917a2e77..00000000000 --- a/include/asm-arm/arch-sa1100/dma.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/dma.h - * - * Generic SA1100 DMA support - * - * Copyright (C) 2000 Nicolas Pitre - * - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "hardware.h" - - -/* - * The SA1100 has six internal DMA channels. - */ -#define SA1100_DMA_CHANNELS 6 - -/* - * Maximum physical DMA buffer size - */ -#define MAX_DMA_SIZE 0x1fff -#define CUT_DMA_SIZE 0x1000 - -/* - * All possible SA1100 devices a DMA channel can be attached to. - */ -typedef enum { - DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */ - DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */ - DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */ - DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */ - DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */ - DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */ - DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */ - DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */ - DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */ - DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */ - DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */ - DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */ - DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */ - DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */ - DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */ - DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */ - DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */ - DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ -} dma_device_t; - -typedef struct { - volatile u_long DDAR; - volatile u_long SetDCSR; - volatile u_long ClrDCSR; - volatile u_long RdDCSR; - volatile dma_addr_t DBSA; - volatile u_long DBTA; - volatile dma_addr_t DBSB; - volatile u_long DBTB; -} dma_regs_t; - -typedef void (*dma_callback_t)(void *data); - -/* - * DMA function prototypes - */ - -extern int sa1100_request_dma( dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **regs ); -extern void sa1100_free_dma( dma_regs_t *regs ); -extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size ); -extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs); -extern void sa1100_reset_dma(dma_regs_t *regs); - -/** - * sa1100_stop_dma - stop DMA in progress - * @regs: identifier for the channel to use - * - * This stops DMA without clearing buffer pointers. Unlike - * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma() - * or sa1100_get_dma_pos(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_resume_dma - resume DMA on a stopped channel - * @regs: identifier for the channel to use - * - * This resumes DMA on a channel previously stopped with - * sa1100_stop_dma(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_clear_dma - clear DMA pointers - * @regs: identifier for the channel to use - * - * This clear any DMA state so the DMA engine is ready to restart - * with new buffers through sa1100_start_dma(). Any buffers in flight - * are discarded. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S deleted file mode 100644 index 127db4aaf4f..00000000000 --- a/include/asm-arm/arch-sa1100/entry-macro.S +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-sa1100/entry-macro.S - * - * Low-level IRQ helper macros for SA1100-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mov \base, #0xfa000000 @ ICIP = 0xfa050000 - add \base, \base, #0x00050000 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base] @ get irqs - ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004 - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #0 - beq 1001f - tst \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tst \irqstat, #0x0f - moveq \irqstat, \irqstat, lsr #4 - addeq \irqnr, \irqnr, #4 - tst \irqstat, #0x03 - moveq \irqstat, \irqstat, lsr #2 - addeq \irqnr, \irqnr, #2 - tst \irqstat, #0x01 - addeqs \irqnr, \irqnr, #1 -1001: - .endm - diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h deleted file mode 100644 index e66ecf74e80..00000000000 --- a/include/asm-arm/arch-sa1100/gpio.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/gpio.h - * - * SA1100 GPIO wrappers for arch-neutral GPIO calls - * - * Written by Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_SA1100_GPIO_H -#define __ASM_ARCH_SA1100_GPIO_H - -#include -#include -#include - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) - return GPLR & GPIO_GPIO(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) - if (value) - GPSR = GPIO_GPIO(gpio); - else - GPCR = GPIO_GPIO(gpio); - else - __gpio_set_value(gpio, value); -} - -#define gpio_cansleep __gpio_cansleep - -static inline unsigned gpio_to_irq(unsigned gpio) -{ - if (gpio < 11) - return IRQ_GPIO0 + gpio; - else - return IRQ_GPIO11 - 11 + gpio; -} - -static inline unsigned irq_to_gpio(unsigned irq) -{ - if (irq < IRQ_GPIO11_27) - return irq - IRQ_GPIO0; - else - return irq - IRQ_GPIO11 + 11; -} - -#endif diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h deleted file mode 100644 index 3ca0ecf095e..00000000000 --- a/include/asm-arm/arch-sa1100/h3600.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * - * Definitions for H3600 Handheld Computer - * - * Copyright 2000 Compaq Computer Corporation. - * - * Use consistent with the GNU GPL is permitted, - * provided that this copyright notice is - * preserved in its entirety in all copies and derived works. - * - * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, - * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS - * FITNESS FOR ANY PARTICULAR PURPOSE. - * - * Author: Jamey Hicks. - * - * History: - * - * 2001-10-?? Andrew Christian Added support for iPAQ H3800 - * - */ - -#ifndef _INCLUDE_H3600_H_ -#define _INCLUDE_H3600_H_ - -typedef int __bitwise pm_request_t; - -#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */ -#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */ - -/* generalized support for H3xxx series Compaq Pocket PC's */ -#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800()) - -/* Physical memory regions corresponding to chip selects */ -#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) -#define H3600_BANK_2_PHYS SA1100_CS2_PHYS -#define H3600_BANK_4_PHYS SA1100_CS4_PHYS - -/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */ -#define H3600_EGPIO_VIRT 0xf0000000 -#define H3600_BANK_2_VIRT 0xf1000000 -#define H3600_BANK_4_VIRT 0xf3800000 - -/* - Machine-independent GPIO definitions - --- these are common across all current iPAQ platforms -*/ - -#define GPIO_H3600_NPOWER_BUTTON GPIO_GPIO (0) /* Also known as the "off button" */ - -#define GPIO_H3600_PCMCIA_CD1 GPIO_GPIO (10) -#define GPIO_H3600_PCMCIA_IRQ1 GPIO_GPIO (11) - -/* UDA1341 L3 Interface */ -#define GPIO_H3600_L3_DATA GPIO_GPIO (14) -#define GPIO_H3600_L3_MODE GPIO_GPIO (15) -#define GPIO_H3600_L3_CLOCK GPIO_GPIO (16) - -#define GPIO_H3600_PCMCIA_CD0 GPIO_GPIO (17) -#define GPIO_H3600_SYS_CLK GPIO_GPIO (19) -#define GPIO_H3600_PCMCIA_IRQ0 GPIO_GPIO (21) - -#define GPIO_H3600_COM_DCD GPIO_GPIO (23) -#define GPIO_H3600_OPT_IRQ GPIO_GPIO (24) -#define GPIO_H3600_COM_CTS GPIO_GPIO (25) -#define GPIO_H3600_COM_RTS GPIO_GPIO (26) - -#define IRQ_GPIO_H3600_NPOWER_BUTTON IRQ_GPIO0 -#define IRQ_GPIO_H3600_PCMCIA_CD1 IRQ_GPIO10 -#define IRQ_GPIO_H3600_PCMCIA_IRQ1 IRQ_GPIO11 -#define IRQ_GPIO_H3600_PCMCIA_CD0 IRQ_GPIO17 -#define IRQ_GPIO_H3600_PCMCIA_IRQ0 IRQ_GPIO21 -#define IRQ_GPIO_H3600_COM_DCD IRQ_GPIO23 -#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24 -#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25 - - -#ifndef __ASSEMBLY__ - -enum ipaq_egpio_type { - IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */ - IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */ - IPAQ_EGPIO_AUDIO_ON, /* Audio power */ - IPAQ_EGPIO_QMUTE, /* Audio muting */ - IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */ - IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */ - IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */ - IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */ - IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */ - IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */ - IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */ - IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */ - IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */ -}; - -struct ipaq_model_ops { - const char *generic_name; - void (*control)(enum ipaq_egpio_type, int); - unsigned long (*read)(void); - void (*blank_callback)(int blank); - int (*pm_callback)(int req); /* Primary model callback */ - int (*pm_callback_aux)(int req); /* Secondary callback (used by HAL modules) */ -}; - -extern struct ipaq_model_ops ipaq_model_ops; - -static __inline__ const char * h3600_generic_name(void) -{ - return ipaq_model_ops.generic_name; -} - -static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,level); -} - -static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,0); -} - -static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,1); -} - -static __inline__ unsigned long read_h3600_egpio(void) -{ - if (ipaq_model_ops.read) - return ipaq_model_ops.read(); - return 0; -} - -static __inline__ int h3600_register_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = f; - return 0; -} - -static __inline__ void h3600_unregister_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = NULL; -} - - -static __inline__ int h3600_register_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = f; - return 0; -} - -static __inline__ void h3600_unregister_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = NULL; -} - -static __inline__ int h3600_power_management(int req) -{ - if (ipaq_model_ops.pm_callback) - return ipaq_model_ops.pm_callback(req); - return 0; -} - -#endif /* ASSEMBLY */ - -#endif /* _INCLUDE_H3600_H_ */ diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/include/asm-arm/arch-sa1100/h3600_gpio.h deleted file mode 100644 index 62b0b787968..00000000000 --- a/include/asm-arm/arch-sa1100/h3600_gpio.h +++ /dev/null @@ -1,540 +0,0 @@ -/* - * - * Definitions for H3600 Handheld Computer - * - * Copyright 2000 Compaq Computer Corporation. - * - * Use consistent with the GNU GPL is permitted, - * provided that this copyright notice is - * preserved in its entirety in all copies and derived works. - * - * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, - * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS - * FITNESS FOR ANY PARTICULAR PURPOSE. - * - * Author: Jamey Hicks. - * - * History: - * - * 2001-10-?? Andrew Christian Added support for iPAQ H3800 - * - */ - -#ifndef _INCLUDE_H3600_GPIO_H_ -#define _INCLUDE_H3600_GPIO_H_ - -/* - * GPIO lines that are common across ALL iPAQ models are in "h3600.h" - * This file contains machine-specific definitions - */ - -#define GPIO_H3600_SUSPEND GPIO_GPIO (0) -/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */ -#define GPIO_H3100_BT_ON GPIO_GPIO (2) -#define GPIO_H3100_GPIO3 GPIO_GPIO (3) -#define GPIO_H3100_QMUTE GPIO_GPIO (4) -#define GPIO_H3100_LCD_3V_ON GPIO_GPIO (5) -#define GPIO_H3100_AUD_ON GPIO_GPIO (6) -#define GPIO_H3100_AUD_PWR_ON GPIO_GPIO (7) -#define GPIO_H3100_IR_ON GPIO_GPIO (8) -#define GPIO_H3100_IR_FSEL GPIO_GPIO (9) - -/* for H3600, audio sample rate clock generator */ -#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12) -#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13) - -#define GPIO_H3600_ACTION_BUTTON GPIO_GPIO (18) -#define GPIO_H3600_SOFT_RESET GPIO_GPIO (20) /* Also known as BATT_FAULT */ -#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22) -#define GPIO_H3600_OPT_DET GPIO_GPIO (27) - -/* H3800 specific pins */ -#define GPIO_H3800_AC_IN GPIO_GPIO (12) -#define GPIO_H3800_COM_DSR GPIO_GPIO (13) -#define GPIO_H3800_MMC_INT GPIO_GPIO (18) -#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */ -#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22) -#define GPIO_H3800_CLK_OUT GPIO_GPIO (27) - -/****************************************************/ - -#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18 -#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27 - -#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18 -#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */ - -/* H3100 / 3600 EGPIO pins */ -#define EGPIO_H3600_VPP_ON (1 << 0) -#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */ -#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */ -#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */ -#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */ -#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */ -#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */ -#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */ - -/* H3600 only EGPIO pins */ -#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */ -#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */ -#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */ -#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */ -#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */ -#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */ -#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */ -#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */ - -/********************* H3800, ASIC #2 ********************/ - -#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT) -#define H3800_ASIC2_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) -#define H3800_ASIC2_NOFFSET(s,x,n,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) - -#define _H3800_ASIC2_GPIO_Base 0x0000 -#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */ -#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */ -#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */ -#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */ -#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */ - -#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType ) -#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType ) -#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType ) -#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear ) -#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag ) -#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data ) -#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut ) -#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable ) -#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate ) - -#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */ -#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */ -#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */ -#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */ -#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */ -#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */ -#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */ -#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */ -#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */ -#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */ -#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */ -#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */ - -#define _H3800_ASIC2_KPIO_Base 0x0200 -#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */ -#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */ -#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */ - -#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction ) -#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType ) -#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType ) -#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType ) -#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear ) -#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag ) -#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data ) -#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut ) -#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable ) -#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate ) - -#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 ) -#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 ) -#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 ) -#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 ) -#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 ) -#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 ) -#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 ) -#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 ) - -#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */ -#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */ -#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */ -#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */ -#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */ -#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */ -#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */ -#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */ -#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */ -#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */ -#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */ -#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */ - -/* Alternate KPIO functions (set by default) */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */ - -#define _H3800_ASIC2_SPI_Base 0x0400 -#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */ - -#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control ) -#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data ) -#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled ) - -#define _H3800_ASIC2_PWM_0_Base 0x0600 -#define _H3800_ASIC2_PWM_1_Base 0x0700 -#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */ -#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */ - -#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase ) -#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime ) -#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime ) - -#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase ) -#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime ) -#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime ) - -#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */ -#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */ -#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */ - -#define _H3800_ASIC2_LED_0_Base 0x0800 -#define _H3800_ASIC2_LED_1_Base 0x0880 -#define _H3800_ASIC2_LED_2_Base 0x0900 -#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */ -#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */ - -#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase ) -#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime ) -#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime ) -#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock ) - -#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase ) -#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime ) -#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime ) -#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock ) - -#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase ) -#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime ) -#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime ) -#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock ) - -#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */ -#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */ -#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 ) -#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */ - -#define _H3800_ASIC2_UART_0_Base 0x0A00 -#define _H3800_ASIC2_UART_1_Base 0x0C00 -#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */ -#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */ -#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */ - -#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive ) -#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit ) -#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable ) -#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify ) -#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl ) -#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl ) -#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus ) -#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus ) -#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad ) -#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL ) -#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH ) - -#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive ) -#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit ) -#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable ) -#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify ) -#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl ) -#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl ) -#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus ) -#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus ) -#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad ) -#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL ) -#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH ) - -#define _H3800_ASIC2_TIMER_Base 0x0E00 -#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */ - -#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command ) - -#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */ -#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */ -#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */ -#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */ -#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */ -#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */ -#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */ -#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */ - -#define _H3800_ASIC2_CLOCK_Base 0x1000 -#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */ - -#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable ) - -#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */ -#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */ -#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */ -#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */ -#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */ -#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */ -#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */ -#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */ -#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */ -#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */ -#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */ -#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */ -#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */ - -#define _H3800_ASIC2_ADC_Base 0x1200 -#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */ -#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */ - -#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer ) -#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus ) -#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data ) - -#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */ -#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */ - -#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */ -#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 ) -#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 ) -#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */ -#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */ - - -#define _H3800_ASIC2_INTR_Base 0x1600 -#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */ -#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */ -#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */ - -#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag ) -#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale ) -#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet ) - -#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */ -#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 ) -#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 ) -#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 ) -#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 ) - -#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */ -#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */ - - -#define _H3800_ASIC2_OWM_Base 0x1800 -#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */ -#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */ -#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */ -#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */ -#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */ - -#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command ) -#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data ) -#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt ) -#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable ) -#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor ) - -#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */ -#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */ -#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */ -#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */ - -#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */ -#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */ -#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */ -#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */ -#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */ - -#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */ -#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */ -#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */ - -#define _H3800_ASIC2_FlashCtl_Base 0x1A00 - -/****************************************************/ -/* H3800, ASIC #1 - * This ASIC is accesed through ASIC #2, and - * mapped into the 1c00 - 1f00 region - */ - -#define H3800_ASIC1_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1)))) - -#define _H3800_ASIC1_MMC_Base 0x1c00 - -#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */ -#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */ -#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */ -#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */ -#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */ -#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */ -#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */ -#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */ -#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */ -#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */ -#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */ -#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */ -#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */ - -#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock ) -#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status ) -#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate ) -#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister ) -#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont ) -#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout ) -#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout ) -#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength ) -#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks ) -#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask ) -#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber ) -#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH ) -#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL ) -#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo ) -#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull ) - -#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */ -#define H3800_ASIC1_MMC_START_CLOCK (1 << 1) - -#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0) -#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1) -#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2) -#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3) -#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */ -#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5) -#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6) -#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7) -#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */ -#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */ -#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */ -#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */ - -#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */ -#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */ -#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */ -#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */ - -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */ - -#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0) -#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1) -#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2) -#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3) - -#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0) - -/********* GPIO **********/ - -#define _H3800_ASIC1_GPIO_Base 0x1e00 - -#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */ -#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */ -#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */ -#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */ -#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */ -#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */ -#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */ -#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */ -#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */ -#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */ -#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */ -#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */ - -#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask ) -#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out ) -#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType ) -#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger ) -#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger ) -#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus ) -#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus ) -#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State ) -#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset ) -#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask ) -#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir ) -#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut ) -#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status ) -#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir ) -#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut ) - -#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0) -#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1) -#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2) -#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3) -#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4) -#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5) - -#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0) -#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1) -#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2) - -/* These are all outputs */ -#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */ -#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */ -#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */ -#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */ -#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */ -#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */ -#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */ -#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */ -#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */ -#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */ -#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */ -#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */ -#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */ -#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */ -#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */ - -/* Write enable for the flash */ - -#define _H3800_ASIC1_FlashWP_Base 0x1F00 -#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */ -#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON ) - -#endif /* _INCLUDE_H3600_GPIO_H_ */ diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h deleted file mode 100644 index 1abd7cfc8bc..00000000000 --- a/include/asm-arm/arch-sa1100/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/hardware.h - * - * Copyright (C) 1998 Nicolas Pitre - * - * This file contains the hardware definitions for SA1100 architecture - * - * 2000/05/23 John Dorsey - * Definitions for SA1111 added. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - - -#define UNCACHEABLE_ADDR 0xfa050000 - - -/* - * SA1100 internal I/O mappings - * - * We have the following mapping: - * phys virt - * 80000000 f8000000 - * 90000000 fa000000 - * a0000000 fc000000 - * b0000000 fe000000 - */ - -#define VIO_BASE 0xf8000000 /* virtual start of IO space */ -#define VIO_SHIFT 3 /* x = IO space shrink power */ -#define PIO_START 0x80000000 /* physical start of IO space */ - -#define io_p2v( x ) \ - ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE ) -#define io_v2p( x ) \ - ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))< -#include -#include - -#error "This code is broken and needs update to match with current ide support" - - -/* - * Set up a hw structure for a specified data port, control port and IRQ. - * This should follow whatever the default interface uses. - */ -static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, - unsigned long ctrl_port, int *irq) -{ - unsigned long reg = data_port; - int i; - int regincr = 1; - - /* The Empeg board has the first two address lines unused */ - if (machine_is_empeg()) - regincr = 1 << 2; - - /* The LART doesn't use A0 for IDE */ - if (machine_is_lart()) - regincr = 1 << 1; - - memset(hw, 0, sizeof(*hw)); - - for (i = 0; i <= 7; i++) { - hw->io_ports_array[i] = reg; - reg += regincr; - } - - hw->io_ports.ctl_addr = ctrl_port; - - if (irq) - *irq = 0; -} - -/* - * This registers the standard ports for this architecture with the IDE - * driver. - */ -static __inline__ void -ide_init_default_hwifs(void) -{ - if (machine_is_lart()) { -#ifdef CONFIG_SA1100_LART - hw_regs_t hw; - - /* Enable GPIO as interrupt line */ - GPDR &= ~LART_GPIO_IDE; - set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING); - - /* set PCMCIA interface timing */ - MECR = 0x00060006; - - /* init the interface */ - ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL); - hw.irq = LART_IRQ_IDE; - ide_register_hw(&hw); -#endif - } -} diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h deleted file mode 100644 index 0756269404b..00000000000 --- a/include/asm-arm/arch-sa1100/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h deleted file mode 100644 index 7bf80484bb7..00000000000 --- a/include/asm-arm/arch-sa1100/irqs.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/irqs.h - * - * Copyright (C) 1996 Russell King - * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus). - * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation) - * - * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. - */ - -#define IRQ_GPIO0 0 -#define IRQ_GPIO1 1 -#define IRQ_GPIO2 2 -#define IRQ_GPIO3 3 -#define IRQ_GPIO4 4 -#define IRQ_GPIO5 5 -#define IRQ_GPIO6 6 -#define IRQ_GPIO7 7 -#define IRQ_GPIO8 8 -#define IRQ_GPIO9 9 -#define IRQ_GPIO10 10 -#define IRQ_GPIO11_27 11 -#define IRQ_LCD 12 /* LCD controller */ -#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */ -#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */ -#define IRQ_Ser1UART 15 /* Ser. port 1 UART */ -#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */ -#define IRQ_Ser3UART 17 /* Ser. port 3 UART */ -#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */ -#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */ -#define IRQ_DMA0 20 /* DMA controller channel 0 */ -#define IRQ_DMA1 21 /* DMA controller channel 1 */ -#define IRQ_DMA2 22 /* DMA controller channel 2 */ -#define IRQ_DMA3 23 /* DMA controller channel 3 */ -#define IRQ_DMA4 24 /* DMA controller channel 4 */ -#define IRQ_DMA5 25 /* DMA controller channel 5 */ -#define IRQ_OST0 26 /* OS Timer match 0 */ -#define IRQ_OST1 27 /* OS Timer match 1 */ -#define IRQ_OST2 28 /* OS Timer match 2 */ -#define IRQ_OST3 29 /* OS Timer match 3 */ -#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */ -#define IRQ_RTCAlrm 31 /* RTC Alarm */ - -#define IRQ_GPIO11 32 -#define IRQ_GPIO12 33 -#define IRQ_GPIO13 34 -#define IRQ_GPIO14 35 -#define IRQ_GPIO15 36 -#define IRQ_GPIO16 37 -#define IRQ_GPIO17 38 -#define IRQ_GPIO18 39 -#define IRQ_GPIO19 40 -#define IRQ_GPIO20 41 -#define IRQ_GPIO21 42 -#define IRQ_GPIO22 43 -#define IRQ_GPIO23 44 -#define IRQ_GPIO24 45 -#define IRQ_GPIO25 46 -#define IRQ_GPIO26 47 -#define IRQ_GPIO27 48 - -/* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase IRQ_BOARD_END, but keep it - * within sensible limits. IRQs 49 to 64 are available. - */ -#define IRQ_BOARD_START 49 -#define IRQ_BOARD_END 65 - -#define IRQ_SA1111_START (IRQ_BOARD_END) -#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) -#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) -#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) -#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) -#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) -#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) -#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) -#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) -#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) -#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) -#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) -#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) -#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) -#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) -#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) -#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) -#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) -#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) -#define IRQ_MSTXINT (IRQ_BOARD_END + 18) -#define IRQ_MSRXINT (IRQ_BOARD_END + 19) -#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) -#define IRQ_TPTXINT (IRQ_BOARD_END + 21) -#define IRQ_TPRXINT (IRQ_BOARD_END + 22) -#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) -#define SSPXMTINT (IRQ_BOARD_END + 24) -#define SSPRCVINT (IRQ_BOARD_END + 25) -#define SSPROR (IRQ_BOARD_END + 26) -#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) -#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) -#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) -#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) -#define AUDTFSR (IRQ_BOARD_END + 36) -#define AUDRFSR (IRQ_BOARD_END + 37) -#define AUDTUR (IRQ_BOARD_END + 38) -#define AUDROR (IRQ_BOARD_END + 39) -#define AUDDTS (IRQ_BOARD_END + 40) -#define AUDRDD (IRQ_BOARD_END + 41) -#define AUDSTO (IRQ_BOARD_END + 42) -#define IRQ_USBPWR (IRQ_BOARD_END + 43) -#define IRQ_HCIM (IRQ_BOARD_END + 44) -#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) -#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) -#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) -#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) -#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) -#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) -#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) -#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) -#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) -#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) - -#define IRQ_LOCOMO_START (IRQ_BOARD_END) -#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) -#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) -#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) -#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) -#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) -#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) -#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) -#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) -#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) -#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) -#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) -#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) -#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) -#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) -#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) -#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) -#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) -#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) -#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) -#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) -#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20) -#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) - -/* - * Figure out the MAX IRQ number. - * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 - * Otherwise, we have the standard IRQs only. - */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SA1100_H3800) -#define NR_IRQS (IRQ_BOARD_END) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) -#else -#define NR_IRQS (IRQ_BOARD_START) -#endif - -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) -#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) -#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) - -/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ -#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) -#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) -#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) -#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) - -/* H3800-specific IRQs (CONFIG_SA1100_H3800) */ -#define H3800_KPIO_IRQ_START (IRQ_BOARD_START) -#define IRQ_H3800_KEY (IRQ_BOARD_START + 0) -#define IRQ_H3800_SPI (IRQ_BOARD_START + 1) -#define IRQ_H3800_OWM (IRQ_BOARD_START + 2) -#define IRQ_H3800_ADC (IRQ_BOARD_START + 3) -#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4) -#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5) -#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6) -#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7) -#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8) -#define H3800_KPIO_IRQ_COUNT 9 - -#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9) -#define IRQ_H3800_PEN (IRQ_BOARD_START + 9) -#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10) -#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11) -#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12) -#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13) -#define H3800_GPIO_IRQ_COUNT 5 diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h deleted file mode 100644 index 45d2bb59f9d..00000000000 --- a/include/asm-arm/arch-sa1100/jornada720.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-sa1100/jornada720.h - * - * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728 - * - * Copyright (C) 2007 Kristoffer Ericson - * Copyright (C) 2000 John Ankcorn - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - - /* HP Jornada 7xx microprocessor commands */ -#define GETBATTERYDATA 0xc0 -#define GETSCANKEYCODE 0x90 -#define GETTOUCHSAMPLES 0xa0 -#define GETCONTRAST 0xD0 -#define SETCONTRAST 0xD1 -#define GETBRIGHTNESS 0xD2 -#define SETBRIGHTNESS 0xD3 -#define CONTRASTOFF 0xD8 -#define BRIGHTNESSOFF 0xD9 -#define PWMOFF 0xDF -#define TXDUMMY 0x11 -#define ERRORCODE 0x00 diff --git a/include/asm-arm/arch-sa1100/lart.h b/include/asm-arm/arch-sa1100/lart.h deleted file mode 100644 index 8a5482d908d..00000000000 --- a/include/asm-arm/arch-sa1100/lart.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _INCLUDE_LART_H -#define _INCLUDE_LART_H - -#define LART_GPIO_ETH0 GPIO_GPIO0 -#define LART_IRQ_ETH0 IRQ_GPIO0 - -#define LART_GPIO_IDE GPIO_GPIO1 -#define LART_IRQ_IDE IRQ_GPIO1 - -#define LART_GPIO_UCB1200 GPIO_GPIO18 -#define LART_IRQ_UCB1200 IRQ_GPIO18 - -#endif diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h deleted file mode 100644 index f58a22755c6..00000000000 --- a/include/asm-arm/arch-sa1100/mcp.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/mcp.h - * - * Copyright (C) 2005 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_ARCH_MCP_H -#define __ASM_ARM_ARCH_MCP_H - -#include - -struct mcp_plat_data { - u32 mccr0; - u32 mccr1; - unsigned int sclk_rate; -}; - -#endif diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h deleted file mode 100644 index 0e907fc6d42..00000000000 --- a/include/asm-arm/arch-sa1100/memory.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/memory.h - * - * Copyright (C) 1999-2000 Nicolas Pitre - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset is 0xc0000000 on the SA1100 - */ -#define PHYS_OFFSET UL(0xc0000000) - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_SA1111 -void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); - -#define arch_adjust_zones(node, size, holes) \ - sa1111_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1) - -#endif -#endif - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * On the SA1100, bus addresses are equivalent to physical addresses. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much convenient to use Linux's NUMA support to implement our - * memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ -#define NODE_MEM_SIZE_BITS 27 - -/* - * Cache flushing area - SA1100 zero bank - */ -#define FLUSH_BASE_PHYS 0xe0000000 -#define FLUSH_BASE 0xf5000000 -#define FLUSH_BASE_MINICACHE 0xf5100000 - -#endif diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/include/asm-arm/arch-sa1100/mtd-xip.h deleted file mode 100644 index 80cfdac2b94..00000000000 --- a/include/asm-arm/arch-sa1100/mtd-xip.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ - */ - -#ifndef __ARCH_SA1100_MTD_XIP_H__ -#define __ARCH_SA1100_MTD_XIP_H__ - -#define xip_irqpending() (ICIP & ICMR) - -/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) - -#endif /* __ARCH_SA1100_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-sa1100/neponset.h b/include/asm-arm/arch-sa1100/neponset.h deleted file mode 100644 index 09ec9e2bd18..00000000000 --- a/include/asm-arm/arch-sa1100/neponset.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/neponset.h - * - * Created 2000/06/05 by Nicolas Pitre - * - * This file contains the hardware specific definitions for Assabet - * Only include this file from SA1100-specific files. - * - * 2000/05/23 John Dorsey - * Definitions for Neponset added. - */ -#ifndef __ASM_ARCH_NEPONSET_H -#define __ASM_ARCH_NEPONSET_H - -/* - * Neponset definitions: - */ - -#define NEPONSET_CPLD_BASE (0x10000000) -#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000) -#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE) - -#define _IRR 0x10000024 /* Interrupt Reason Register */ -#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */ -#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */ -#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */ -#define _NCR_0 0x100000a0 /* Control Register (RW) */ -#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */ -#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */ -#define _SWPK 0x10000020 /* Switch pack (RO) */ -#define _WHOAMI 0x10000000 /* System ID Register (RO) */ - -#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */ - -#define IRR (*((volatile u_char *) Nep_p2v(_IRR))) -#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL))) -#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0))) -#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1))) -#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0))) -#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT))) -#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN))) -#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK))) -#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI))) - -#define LEDS (*((volatile Word *) Nep_p2v(_LEDS))) - -#define IRR_ETHERNET (1<<0) -#define IRR_USAR (1<<1) -#define IRR_SA1111 (1<<2) - -#define AUD_SEL_1341 (1<<0) -#define AUD_MUTE_1341 (1<<1) - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) - -#define NCR_GP01_OFF (1<<0) -#define NCR_TP_PWR_EN (1<<1) -#define NCR_MS_PWR_EN (1<<2) -#define NCR_ENET_OSC_EN (1<<3) -#define NCR_SPI_KB_WK_UP (1<<4) -#define NCR_A0VPP (1<<5) -#define NCR_A1VPP (1<<6) - -#endif diff --git a/include/asm-arm/arch-sa1100/shannon.h b/include/asm-arm/arch-sa1100/shannon.h deleted file mode 100644 index ec27d6e1214..00000000000 --- a/include/asm-arm/arch-sa1100/shannon.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _INCLUDE_SHANNON_H -#define _INCLUDE_SHANNON_H - -/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT, - * written by */ - -#define SHANNON_GPIO_SPI_FLASH GPIO_GPIO (0) /* Output - Driven low, enables SPI to flash */ -#define SHANNON_GPIO_SPI_DSP GPIO_GPIO (1) /* Output - Driven low, enables SPI to DSP */ -/* lcd lower = GPIO 2-9 */ -#define SHANNON_GPIO_SPI_OUTPUT GPIO_GPIO (10) /* Output - SPI output to DSP */ -#define SHANNON_GPIO_SPI_INPUT GPIO_GPIO (11) /* Input - SPI input from DSP */ -#define SHANNON_GPIO_SPI_CLOCK GPIO_GPIO (12) /* Output - Clock for SPI */ -#define SHANNON_GPIO_SPI_FRAME GPIO_GPIO (13) /* Output - Frame marker - not used */ -#define SHANNON_GPIO_SPI_RTS GPIO_GPIO (14) /* Input - SPI Ready to Send */ -#define SHANNON_IRQ_GPIO_SPI_RTS IRQ_GPIO14 -#define SHANNON_GPIO_SPI_CTS GPIO_GPIO (15) /* Output - SPI Clear to Send */ -#define SHANNON_GPIO_IRQ_CODEC GPIO_GPIO (16) /* in, irq from ucb1200 */ -#define SHANNON_IRQ_GPIO_IRQ_CODEC IRQ_GPIO16 -#define SHANNON_GPIO_DSP_RESET GPIO_GPIO (17) /* Output - Drive low to reset the DSP */ -#define SHANNON_GPIO_CODEC_RESET GPIO_GPIO (18) /* Output - Drive low to reset the UCB1x00 */ -#define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */ -#define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */ -#define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */ -#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */ -/* XXX GPIO 23 unaccounted for */ -#define SHANNON_GPIO_EJECT_0 GPIO_GPIO (24) /* in */ -#define SHANNON_IRQ_GPIO_EJECT_0 IRQ_GPIO24 -#define SHANNON_GPIO_EJECT_1 GPIO_GPIO (25) /* in */ -#define SHANNON_IRQ_GPIO_EJECT_1 IRQ_GPIO25 -#define SHANNON_GPIO_RDY_0 GPIO_GPIO (26) /* in */ -#define SHANNON_IRQ_GPIO_RDY_0 IRQ_GPIO26 -#define SHANNON_GPIO_RDY_1 GPIO_GPIO (27) /* in */ -#define SHANNON_IRQ_GPIO_RDY_1 IRQ_GPIO27 - -/* MCP UCB codec GPIO pins... */ - -#define SHANNON_UCB_GPIO_BACKLIGHT 9 -#define SHANNON_UCB_GPIO_BRIGHT_MASK 7 -#define SHANNON_UCB_GPIO_BRIGHT 6 -#define SHANNON_UCB_GPIO_CONTRAST_MASK 0x3f -#define SHANNON_UCB_GPIO_CONTRAST 0 - -#endif diff --git a/include/asm-arm/arch-sa1100/simpad.h b/include/asm-arm/arch-sa1100/simpad.h deleted file mode 100644 index 034301d23f6..00000000000 --- a/include/asm-arm/arch-sa1100/simpad.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/simpad.h - * - * based of assabet.h same as HUW_Webpanel - * - * This file contains the hardware specific definitions for SIMpad - * - * 2001/05/14 Juergen Messerer - */ - -#ifndef __ASM_ARCH_SIMPAD_H -#define __ASM_ARCH_SIMPAD_H - - -#define GPIO_UART1_RTS GPIO_GPIO14 -#define GPIO_UART1_DTR GPIO_GPIO7 -#define GPIO_UART1_CTS GPIO_GPIO8 -#define GPIO_UART1_DCD GPIO_GPIO23 -#define GPIO_UART1_DSR GPIO_GPIO6 - -#define GPIO_UART3_RTS GPIO_GPIO12 -#define GPIO_UART3_DTR GPIO_GPIO16 -#define GPIO_UART3_CTS GPIO_GPIO13 -#define GPIO_UART3_DCD GPIO_GPIO18 -#define GPIO_UART3_DSR GPIO_GPIO17 - -#define GPIO_POWER_BUTTON GPIO_GPIO0 -#define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */ - -#define IRQ_UART1_CTS IRQ_GPIO15 -#define IRQ_UART1_DCD GPIO_GPIO23 -#define IRQ_UART1_DSR GPIO_GPIO6 -#define IRQ_UART3_CTS GPIO_GPIO13 -#define IRQ_UART3_DCD GPIO_GPIO18 -#define IRQ_UART3_DSR GPIO_GPIO17 - -#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22 -#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0 - - -/*--- PCMCIA ---*/ -#define GPIO_CF_CD GPIO_GPIO24 -#define GPIO_CF_IRQ GPIO_GPIO1 -#define IRQ_GPIO_CF_IRQ IRQ_GPIO1 -#define IRQ_GPIO_CF_CD IRQ_GPIO24 - -/*--- SmartCard ---*/ -#define GPIO_SMART_CARD GPIO_GPIO10 -#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10 - -// CS3 Latch is write only, a shadow is necessary - -#define CS3BUSTYPE unsigned volatile long -#define CS3_BASE 0xf1000000 - -#define VCC_5V_EN 0x0001 // For 5V PCMCIA -#define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA -#define EN1 0x0004 // This is only for EPROM's -#define EN0 0x0008 // Both should be enable for 3.3V or 5V -#define DISPLAY_ON 0x0010 -#define PCMCIA_BUFF_DIS 0x0020 -#define MQ_RESET 0x0040 -#define PCMCIA_RESET 0x0080 -#define DECT_POWER_ON 0x0100 -#define IRDA_SD 0x0200 // Shutdown for powersave -#define RS232_ON 0x0400 -#define SD_MEDIAQ 0x0800 // Shutdown for powersave -#define LED2_ON 0x1000 -#define IRDA_MODE 0x2000 // Fast/Slow IrDA mode -#define ENABLE_5V 0x4000 // Enable 5V circuit -#define RESET_SIMCARD 0x8000 - -#define RS232_ENABLE 0x0440 -#define PCMCIAMASK 0x402f - - -struct simpad_battery { - unsigned char ac_status; /* line connected yes/no */ - unsigned char status; /* battery loading yes/no */ - unsigned char percentage; /* percentage loaded */ - unsigned short life; /* life till empty */ -}; - -/* These should match the apm_bios.h definitions */ -#define SIMPAD_AC_STATUS_AC_OFFLINE 0x00 -#define SIMPAD_AC_STATUS_AC_ONLINE 0x01 -#define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */ -#define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff - -/* These bitfields are rarely "or'd" together */ -#define SIMPAD_BATT_STATUS_HIGH 0x01 -#define SIMPAD_BATT_STATUS_LOW 0x02 -#define SIMPAD_BATT_STATUS_CRITICAL 0x04 -#define SIMPAD_BATT_STATUS_CHARGING 0x08 -#define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10 -#define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */ -#define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */ -#define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */ -#define SIMPAD_BATT_STATUS_NOBATT 0x80 -#define SIMPAD_BATT_STATUS_UNKNOWN 0xff - -extern int simpad_get_battery(struct simpad_battery* ); - -#endif // __ASM_ARCH_SIMPAD_H - - - - - - - - diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h deleted file mode 100644 index 63375a0c014..00000000000 --- a/include/asm-arm/arch-sa1100/system.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/system.h - * - * Copyright (c) 1999 Nicolas Pitre - */ -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Use on-chip reset capability */ - RSRR = RSRR_SWR; - } -} diff --git a/include/asm-arm/arch-sa1100/timex.h b/include/asm-arm/arch-sa1100/timex.h deleted file mode 100644 index 837be9b797d..00000000000 --- a/include/asm-arm/arch-sa1100/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/timex.h - * - * SA1100 architecture timex specifications - * - * Copyright (C) 1998 - */ - -/* - * SA1100 timer - */ -#define CLOCK_TICK_RATE 3686400 diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h deleted file mode 100644 index 17e64d232e7..00000000000 --- a/include/asm-arm/arch-sa1100/uncompress.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/uncompress.h - * - * (C) 1999 Nicolas Pitre - * - * Reorganised to be machine independent. - */ - -#include "hardware.h" - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = _Ser3UTCR0; - if (UART(UTCR3) & UTCR3_TXE) break; - serial_port = _Ser1UTCR0; - if (UART(UTCR3) & UTCR3_TXE) break; - serial_port = _Ser2UTCR0; - if (UART(UTCR3) & UTCR3_TXE) break; - return; - } while (0); - - /* wait for space in the UART's transmitter */ - while (!(UART(UTSR1) & UTSR1_TNF)) - barrier(); - - /* send the character out. */ - UART(UTDR) = c; -} - -static inline void flush(void) -{ -} - -/* - * Nothing to do for these - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h deleted file mode 100644 index 2fb1c6f3aa1..00000000000 --- a/include/asm-arm/arch-sa1100/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/vmalloc.h - */ -#define VMALLOC_END (0xe8000000) diff --git a/include/asm-arm/arch-shark/debug-macro.S b/include/asm-arm/arch-shark/debug-macro.S deleted file mode 100644 index 7cb37f78825..00000000000 --- a/include/asm-arm/arch-shark/debug-macro.S +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/include/asm-arm/arch-shark/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mov \rx, #0xe0000000 - orr \rx, \rx, #0x000003f8 - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx - mov \rd, #0 -1001: add \rd, \rd, #1 - teq \rd, #0x10000 - bne 1001b - .endm - - .macro waituart,rd,rx - .endm diff --git a/include/asm-arm/arch-shark/dma.h b/include/asm-arm/arch-shark/dma.h deleted file mode 100644 index fc985d5e62a..00000000000 --- a/include/asm-arm/arch-shark/dma.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/dma.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* Use only the lowest 4MB, nothing else works. - * The rest is not DMAable. See dev / .properties - * in OpenFirmware. - */ -#define MAX_DMA_ADDRESS 0xC0400000 -#define MAX_DMA_CHANNELS 8 -#define DMA_ISA_CASCADE 4 - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-shark/entry-macro.S b/include/asm-arm/arch-shark/entry-macro.S deleted file mode 100644 index 82463f30f3d..00000000000 --- a/include/asm-arm/arch-shark/entry-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-arm/arch-shark/entry-macro.S - * - * Low-level IRQ helper macros for Shark platform - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xe0000000 - - mov \irqstat, #0x0C - strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */ - ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7 - and \irqstat, \irqnr, #0x80 - teq \irqstat, #0 - beq 43f - and \irqnr, \irqnr, #7 - teq \irqnr, #2 - bne 44f -43: mov \irqstat, #0x0C - strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ - ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8 - and \irqstat, \irqnr, #0x80 - teq \irqstat, #0 - beq 44f - and \irqnr, \irqnr, #7 - add \irqnr, \irqnr, #8 -44: teq \irqstat, #0 - .endm - diff --git a/include/asm-arm/arch-shark/hardware.h b/include/asm-arm/arch-shark/hardware.h deleted file mode 100644 index ecba4526089..00000000000 --- a/include/asm-arm/arch-shark/hardware.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/hardware.h - * - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa110/hardware.h - * Copyright (C) 1996-1999 Russell King. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#ifndef __ASSEMBLY__ - -/* - * Mapping areas - */ -#define IO_BASE 0xe0000000 - -#else - -#define IO_BASE 0 - -#endif - -#define IO_SIZE 0x08000000 -#define IO_START 0x40000000 -#define ROMCARD_SIZE 0x08000000 -#define ROMCARD_START 0x10000000 - -#define PCIO_BASE 0xe0000000 - - -/* defines for the Framebuffer */ -#define FB_START 0x06000000 -#define FB_SIZE 0x01000000 - -#define UNCACHEABLE_ADDR 0xdf010000 - -#define SEQUOIA_LED_GREEN (1<<6) -#define SEQUOIA_LED_AMBER (1<<5) -#define SEQUOIA_LED_BACK (1<<7) - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x6000 -#define PCIBIOS_MIN_MEM 0x50000000 -#define PCIMEM_BASE 0xe8000000 - -#endif - diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h deleted file mode 100644 index b11d7860a9d..00000000000 --- a/include/asm-arm/arch-shark/io.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/io.h - * - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa110/io.h - * Copyright (C) 1997,1998 Russell King - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) - - -static inline unsigned int __ioaddr (unsigned int port) \ -{ \ - if (__PORT_PCIO(port)) \ - return (unsigned int)(PCIO_BASE + (port)); \ - else \ - return (unsigned int)(IO_BASE + (port)); \ -} - -#define __mem_pci(addr) (addr) - -/* - * Translated address IO functions - * - * IO address has already been translated to a virtual address - */ -#define outb_t(v,p) \ - (*(volatile unsigned char *)(p) = (v)) - -#define inb_t(p) \ - (*(volatile unsigned char *)(p)) - -#define outl_t(v,p) \ - (*(volatile unsigned long *)(p) = (v)) - -#define inl_t(p) \ - (*(volatile unsigned long *)(p)) - -#endif diff --git a/include/asm-arm/arch-shark/irqs.h b/include/asm-arm/arch-shark/irqs.h deleted file mode 100644 index b36cc975b29..00000000000 --- a/include/asm-arm/arch-shark/irqs.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/irqs.h - * - * by Alexander Schulz - */ - -#define NR_IRQS 16 - -#define IRQ_ISA_KEYBOARD 1 -#define RTC_IRQ 8 -#define I8042_KBD_IRQ 1 -#define I8042_AUX_IRQ 12 -#define IRQ_HARDDISK 14 diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h deleted file mode 100644 index 6968d6103ea..00000000000 --- a/include/asm-arm/arch-shark/memory.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/memory.h - * - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa110/memory.h - * Copyright (c) 1996-1999 Russell King. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x08000000) - -#ifndef __ASSEMBLY__ - -static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) -{ - if (node != 0) return; - /* Only the first 4 MB (=1024 Pages) are usable for DMA */ - zone_size[1] = zone_size[0] - 1024; - zone_size[0] = 1024; - zhole_size[1] = zhole_size[0]; - zhole_size[0] = 0; -} - -#define arch_adjust_zones(node, size, holes) \ - __arch_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1) - -#endif - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - */ -#define FLUSH_BASE_PHYS 0x80000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-shark/system.h b/include/asm-arm/arch-shark/system.h deleted file mode 100644 index f12d771ab4c..00000000000 --- a/include/asm-arm/arch-shark/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/system.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include - -static void arch_reset(char mode) -{ - short temp; - local_irq_disable(); - /* Reset the Machine via pc[3] of the sequoia chipset */ - outw(0x09,0x24); - temp=inw(0x26); - temp = temp | (1<<3) | (1<<10); - outw(0x09,0x24); - outw(temp,0x26); - -} - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/include/asm-arm/arch-shark/timex.h b/include/asm-arm/arch-shark/timex.h deleted file mode 100644 index 0d02d255513..00000000000 --- a/include/asm-arm/arch-shark/timex.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/timex.h - * - * by Alexander Schulz - */ - -#define CLOCK_TICK_RATE 1193180 diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h deleted file mode 100644 index 7eca6534f1b..00000000000 --- a/include/asm-arm/arch-shark/uncompress.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/uncompress.h - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa285/uncompress.h - * Copyright (C) 1996,1997,1998 Russell King - */ - -#define SERIAL_BASE ((volatile unsigned char *)0x400003f8) - -static inline void putc(int c) -{ - int t; - - SERIAL_BASE[0] = c; - t=0x10000; - while (t--); -} - -static inline void flush(void) -{ -} - -#ifdef DEBUG -static void putn(unsigned long z) -{ - int i; - char x; - - putc('0'); - putc('x'); - for (i=0;i<8;i++) { - x='0'+((z>>((7-i)*4))&0xf); - if (x>'9') x=x-'0'+'A'-10; - putc(x); - } -} - -static void putr() -{ - putc('\n'); - putc('\r'); -} -#endif - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h deleted file mode 100644 index fac37c636b3..00000000000 --- a/include/asm-arm/arch-shark/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/vmalloc.h - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S deleted file mode 100644 index fe106d184e6..00000000000 --- a/include/asm-arm/arch-versatile/debug-macro.S +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-versatile/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf1000000 @ virtual base - orr \rx, \rx, #0x001F0000 - orr \rx, \rx, #0x00001000 - .endm - -#include diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h deleted file mode 100644 index 64257734862..00000000000 --- a/include/asm-arm/arch-versatile/dma.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/dma.h - * - * Copyright (C) 2003 ARM Limited. - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S deleted file mode 100644 index cd114169c3e..00000000000 --- a/include/asm-arm/arch-versatile/entry-macro.S +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-arm/arch-versatile/entry-macro.S - * - * Low-level IRQ helper macros for Versatile platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE) - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status - mov \irqnr, #0 - teq \irqstat, #0 - beq 1003f - -1001: tst \irqstat, #15 - bne 1002f - add \irqnr, \irqnr, #4 - movs \irqstat, \irqstat, lsr #4 - bne 1001b -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - -@ clz \irqnr, \irqstat -@1003: /* EQ will be set if we reach MAXIRQNUM */ - .endm - diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h deleted file mode 100644 index edc06598d18..00000000000 --- a/include/asm-arm/arch-versatile/hardware.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/hardware.h - * - * This file contains the hardware definitions of the Versatile boards. - * - * Copyright (C) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* - * PCI space virtual addresses - */ -#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul -#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul - -#if 0 -#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000 -#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000 -#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000 - -#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0 -#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1 -#endif - -/* CIK guesswork */ -#define PCIBIOS_MIN_IO 0x44000000 -#define PCIBIOS_MIN_MEM 0x50000000 - -#define pcibios_assign_all_busses() 1 - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) - -#endif diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h deleted file mode 100644 index c4d01948e00..00000000000 --- a/include/asm-arm/arch-versatile/io.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h deleted file mode 100644 index f7263b99403..00000000000 --- a/include/asm-arm/arch-versatile/irqs.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -/* - * IRQ interrupts definitions are the same as the INT definitions - * held within platform.h - */ -#define IRQ_VIC_START 0 -#define IRQ_WDOGINT (IRQ_VIC_START + INT_WDOGINT) -#define IRQ_SOFTINT (IRQ_VIC_START + INT_SOFTINT) -#define IRQ_COMMRx (IRQ_VIC_START + INT_COMMRx) -#define IRQ_COMMTx (IRQ_VIC_START + INT_COMMTx) -#define IRQ_TIMERINT0_1 (IRQ_VIC_START + INT_TIMERINT0_1) -#define IRQ_TIMERINT2_3 (IRQ_VIC_START + INT_TIMERINT2_3) -#define IRQ_GPIOINT0 (IRQ_VIC_START + INT_GPIOINT0) -#define IRQ_GPIOINT1 (IRQ_VIC_START + INT_GPIOINT1) -#define IRQ_GPIOINT2 (IRQ_VIC_START + INT_GPIOINT2) -#define IRQ_GPIOINT3 (IRQ_VIC_START + INT_GPIOINT3) -#define IRQ_RTCINT (IRQ_VIC_START + INT_RTCINT) -#define IRQ_SSPINT (IRQ_VIC_START + INT_SSPINT) -#define IRQ_UARTINT0 (IRQ_VIC_START + INT_UARTINT0) -#define IRQ_UARTINT1 (IRQ_VIC_START + INT_UARTINT1) -#define IRQ_UARTINT2 (IRQ_VIC_START + INT_UARTINT2) -#define IRQ_SCIINT (IRQ_VIC_START + INT_SCIINT) -#define IRQ_CLCDINT (IRQ_VIC_START + INT_CLCDINT) -#define IRQ_DMAINT (IRQ_VIC_START + INT_DMAINT) -#define IRQ_PWRFAILINT (IRQ_VIC_START + INT_PWRFAILINT) -#define IRQ_MBXINT (IRQ_VIC_START + INT_MBXINT) -#define IRQ_GNDINT (IRQ_VIC_START + INT_GNDINT) -#define IRQ_VICSOURCE21 (IRQ_VIC_START + INT_VICSOURCE21) -#define IRQ_VICSOURCE22 (IRQ_VIC_START + INT_VICSOURCE22) -#define IRQ_VICSOURCE23 (IRQ_VIC_START + INT_VICSOURCE23) -#define IRQ_VICSOURCE24 (IRQ_VIC_START + INT_VICSOURCE24) -#define IRQ_VICSOURCE25 (IRQ_VIC_START + INT_VICSOURCE25) -#define IRQ_VICSOURCE26 (IRQ_VIC_START + INT_VICSOURCE26) -#define IRQ_VICSOURCE27 (IRQ_VIC_START + INT_VICSOURCE27) -#define IRQ_VICSOURCE28 (IRQ_VIC_START + INT_VICSOURCE28) -#define IRQ_VICSOURCE29 (IRQ_VIC_START + INT_VICSOURCE29) -#define IRQ_VICSOURCE30 (IRQ_VIC_START + INT_VICSOURCE30) -#define IRQ_VICSOURCE31 (IRQ_VIC_START + INT_VICSOURCE31) -#define IRQ_VIC_END (IRQ_VIC_START + 31) - -#define IRQMASK_WDOGINT INTMASK_WDOGINT -#define IRQMASK_SOFTINT INTMASK_SOFTINT -#define IRQMASK_COMMRx INTMASK_COMMRx -#define IRQMASK_COMMTx INTMASK_COMMTx -#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1 -#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3 -#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0 -#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1 -#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2 -#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3 -#define IRQMASK_RTCINT INTMASK_RTCINT -#define IRQMASK_SSPINT INTMASK_SSPINT -#define IRQMASK_UARTINT0 INTMASK_UARTINT0 -#define IRQMASK_UARTINT1 INTMASK_UARTINT1 -#define IRQMASK_UARTINT2 INTMASK_UARTINT2 -#define IRQMASK_SCIINT INTMASK_SCIINT -#define IRQMASK_CLCDINT INTMASK_CLCDINT -#define IRQMASK_DMAINT INTMASK_DMAINT -#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT -#define IRQMASK_MBXINT INTMASK_MBXINT -#define IRQMASK_GNDINT INTMASK_GNDINT -#define IRQMASK_VICSOURCE21 INTMASK_VICSOURCE21 -#define IRQMASK_VICSOURCE22 INTMASK_VICSOURCE22 -#define IRQMASK_VICSOURCE23 INTMASK_VICSOURCE23 -#define IRQMASK_VICSOURCE24 INTMASK_VICSOURCE24 -#define IRQMASK_VICSOURCE25 INTMASK_VICSOURCE25 -#define IRQMASK_VICSOURCE26 INTMASK_VICSOURCE26 -#define IRQMASK_VICSOURCE27 INTMASK_VICSOURCE27 -#define IRQMASK_VICSOURCE28 INTMASK_VICSOURCE28 -#define IRQMASK_VICSOURCE29 INTMASK_VICSOURCE29 -#define IRQMASK_VICSOURCE30 INTMASK_VICSOURCE30 -#define IRQMASK_VICSOURCE31 INTMASK_VICSOURCE31 - -/* - * FIQ interrupts definitions are the same as the INT definitions. - */ -#define FIQ_WDOGINT INT_WDOGINT -#define FIQ_SOFTINT INT_SOFTINT -#define FIQ_COMMRx INT_COMMRx -#define FIQ_COMMTx INT_COMMTx -#define FIQ_TIMERINT0_1 INT_TIMERINT0_1 -#define FIQ_TIMERINT2_3 INT_TIMERINT2_3 -#define FIQ_GPIOINT0 INT_GPIOINT0 -#define FIQ_GPIOINT1 INT_GPIOINT1 -#define FIQ_GPIOINT2 INT_GPIOINT2 -#define FIQ_GPIOINT3 INT_GPIOINT3 -#define FIQ_RTCINT INT_RTCINT -#define FIQ_SSPINT INT_SSPINT -#define FIQ_UARTINT0 INT_UARTINT0 -#define FIQ_UARTINT1 INT_UARTINT1 -#define FIQ_UARTINT2 INT_UARTINT2 -#define FIQ_SCIINT INT_SCIINT -#define FIQ_CLCDINT INT_CLCDINT -#define FIQ_DMAINT INT_DMAINT -#define FIQ_PWRFAILINT INT_PWRFAILINT -#define FIQ_MBXINT INT_MBXINT -#define FIQ_GNDINT INT_GNDINT -#define FIQ_VICSOURCE21 INT_VICSOURCE21 -#define FIQ_VICSOURCE22 INT_VICSOURCE22 -#define FIQ_VICSOURCE23 INT_VICSOURCE23 -#define FIQ_VICSOURCE24 INT_VICSOURCE24 -#define FIQ_VICSOURCE25 INT_VICSOURCE25 -#define FIQ_VICSOURCE26 INT_VICSOURCE26 -#define FIQ_VICSOURCE27 INT_VICSOURCE27 -#define FIQ_VICSOURCE28 INT_VICSOURCE28 -#define FIQ_VICSOURCE29 INT_VICSOURCE29 -#define FIQ_VICSOURCE30 INT_VICSOURCE30 -#define FIQ_VICSOURCE31 INT_VICSOURCE31 - - -#define FIQMASK_WDOGINT INTMASK_WDOGINT -#define FIQMASK_SOFTINT INTMASK_SOFTINT -#define FIQMASK_COMMRx INTMASK_COMMRx -#define FIQMASK_COMMTx INTMASK_COMMTx -#define FIQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1 -#define FIQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3 -#define FIQMASK_GPIOINT0 INTMASK_GPIOINT0 -#define FIQMASK_GPIOINT1 INTMASK_GPIOINT1 -#define FIQMASK_GPIOINT2 INTMASK_GPIOINT2 -#define FIQMASK_GPIOINT3 INTMASK_GPIOINT3 -#define FIQMASK_RTCINT INTMASK_RTCINT -#define FIQMASK_SSPINT INTMASK_SSPINT -#define FIQMASK_UARTINT0 INTMASK_UARTINT0 -#define FIQMASK_UARTINT1 INTMASK_UARTINT1 -#define FIQMASK_UARTINT2 INTMASK_UARTINT2 -#define FIQMASK_SCIINT INTMASK_SCIINT -#define FIQMASK_CLCDINT INTMASK_CLCDINT -#define FIQMASK_DMAINT INTMASK_DMAINT -#define FIQMASK_PWRFAILINT INTMASK_PWRFAILINT -#define FIQMASK_MBXINT INTMASK_MBXINT -#define FIQMASK_GNDINT INTMASK_GNDINT -#define FIQMASK_VICSOURCE21 INTMASK_VICSOURCE21 -#define FIQMASK_VICSOURCE22 INTMASK_VICSOURCE22 -#define FIQMASK_VICSOURCE23 INTMASK_VICSOURCE23 -#define FIQMASK_VICSOURCE24 INTMASK_VICSOURCE24 -#define FIQMASK_VICSOURCE25 INTMASK_VICSOURCE25 -#define FIQMASK_VICSOURCE26 INTMASK_VICSOURCE26 -#define FIQMASK_VICSOURCE27 INTMASK_VICSOURCE27 -#define FIQMASK_VICSOURCE28 INTMASK_VICSOURCE28 -#define FIQMASK_VICSOURCE29 INTMASK_VICSOURCE29 -#define FIQMASK_VICSOURCE30 INTMASK_VICSOURCE30 -#define FIQMASK_VICSOURCE31 INTMASK_VICSOURCE31 - -/* - * Secondary interrupt controller - */ -#define IRQ_SIC_START 32 -#define IRQ_SIC_MMCI0B (IRQ_SIC_START + SIC_INT_MMCI0B) -#define IRQ_SIC_MMCI1B (IRQ_SIC_START + SIC_INT_MMCI1B) -#define IRQ_SIC_KMI0 (IRQ_SIC_START + SIC_INT_KMI0) -#define IRQ_SIC_KMI1 (IRQ_SIC_START + SIC_INT_KMI1) -#define IRQ_SIC_SCI3 (IRQ_SIC_START + SIC_INT_SCI3) -#define IRQ_SIC_UART3 (IRQ_SIC_START + SIC_INT_UART3) -#define IRQ_SIC_CLCD (IRQ_SIC_START + SIC_INT_CLCD) -#define IRQ_SIC_TOUCH (IRQ_SIC_START + SIC_INT_TOUCH) -#define IRQ_SIC_KEYPAD (IRQ_SIC_START + SIC_INT_KEYPAD) -#define IRQ_SIC_DoC (IRQ_SIC_START + SIC_INT_DoC) -#define IRQ_SIC_MMCI0A (IRQ_SIC_START + SIC_INT_MMCI0A) -#define IRQ_SIC_MMCI1A (IRQ_SIC_START + SIC_INT_MMCI1A) -#define IRQ_SIC_AACI (IRQ_SIC_START + SIC_INT_AACI) -#define IRQ_SIC_ETH (IRQ_SIC_START + SIC_INT_ETH) -#define IRQ_SIC_USB (IRQ_SIC_START + SIC_INT_USB) -#define IRQ_SIC_PCI0 (IRQ_SIC_START + SIC_INT_PCI0) -#define IRQ_SIC_PCI1 (IRQ_SIC_START + SIC_INT_PCI1) -#define IRQ_SIC_PCI2 (IRQ_SIC_START + SIC_INT_PCI2) -#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3) -#define IRQ_SIC_END 63 - -#define SIC_IRQMASK_MMCI0B SIC_INTMASK_MMCI0B -#define SIC_IRQMASK_MMCI1B SIC_INTMASK_MMCI1B -#define SIC_IRQMASK_KMI0 SIC_INTMASK_KMI0 -#define SIC_IRQMASK_KMI1 SIC_INTMASK_KMI1 -#define SIC_IRQMASK_SCI3 SIC_INTMASK_SCI3 -#define SIC_IRQMASK_UART3 SIC_INTMASK_UART3 -#define SIC_IRQMASK_CLCD SIC_INTMASK_CLCD -#define SIC_IRQMASK_TOUCH SIC_INTMASK_TOUCH -#define SIC_IRQMASK_KEYPAD SIC_INTMASK_KEYPAD -#define SIC_IRQMASK_DoC SIC_INTMASK_DoC -#define SIC_IRQMASK_MMCI0A SIC_INTMASK_MMCI0A -#define SIC_IRQMASK_MMCI1A SIC_INTMASK_MMCI1A -#define SIC_IRQMASK_AACI SIC_INTMASK_AACI -#define SIC_IRQMASK_ETH SIC_INTMASK_ETH -#define SIC_IRQMASK_USB SIC_INTMASK_USB -#define SIC_IRQMASK_PCI0 SIC_INTMASK_PCI0 -#define SIC_IRQMASK_PCI1 SIC_INTMASK_PCI1 -#define SIC_IRQMASK_PCI2 SIC_INTMASK_PCI2 -#define SIC_IRQMASK_PCI3 SIC_INTMASK_PCI3 - -#define NR_IRQS 64 diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h deleted file mode 100644 index a9370976cc5..00000000000 --- a/include/asm-arm/arch-versatile/memory.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h deleted file mode 100644 index 2af9d7c9c63..00000000000 --- a/include/asm-arm/arch-versatile/platform.h +++ /dev/null @@ -1,510 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/platform.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __address_h -#define __address_h 1 - -/* - * Memory definitions - */ -#define VERSATILE_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ -#define VERSATILE_BOOT_ROM_HI 0x30000000 -#define VERSATILE_BOOT_ROM_BASE VERSATILE_BOOT_ROM_HI /* Normal position */ -#define VERSATILE_BOOT_ROM_SIZE SZ_64M - -#define VERSATILE_SSRAM_BASE /* VERSATILE_SSMC_BASE ? */ -#define VERSATILE_SSRAM_SIZE SZ_2M - -#define VERSATILE_FLASH_BASE 0x34000000 -#define VERSATILE_FLASH_SIZE SZ_64M - -/* - * SDRAM - */ -#define VERSATILE_SDRAM_BASE 0x00000000 - -/* - * Logic expansion modules - * - */ - - -/* ------------------------------------------------------------------------ - * Versatile Registers - * ------------------------------------------------------------------------ - * - */ -#define VERSATILE_SYS_ID_OFFSET 0x00 -#define VERSATILE_SYS_SW_OFFSET 0x04 -#define VERSATILE_SYS_LED_OFFSET 0x08 -#define VERSATILE_SYS_OSC0_OFFSET 0x0C - -#if defined(CONFIG_ARCH_VERSATILE_PB) -#define VERSATILE_SYS_OSC1_OFFSET 0x10 -#define VERSATILE_SYS_OSC2_OFFSET 0x14 -#define VERSATILE_SYS_OSC3_OFFSET 0x18 -#define VERSATILE_SYS_OSC4_OFFSET 0x1C -#elif defined(CONFIG_MACH_VERSATILE_AB) -#define VERSATILE_SYS_OSC1_OFFSET 0x1C -#endif - -#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c - -#define VERSATILE_SYS_LOCK_OFFSET 0x20 -#define VERSATILE_SYS_100HZ_OFFSET 0x24 -#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28 -#define VERSATILE_SYS_CFGDATA2_OFFSET 0x2C -#define VERSATILE_SYS_FLAGS_OFFSET 0x30 -#define VERSATILE_SYS_FLAGSSET_OFFSET 0x30 -#define VERSATILE_SYS_FLAGSCLR_OFFSET 0x34 -#define VERSATILE_SYS_NVFLAGS_OFFSET 0x38 -#define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38 -#define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C -#define VERSATILE_SYS_RESETCTL_OFFSET 0x40 -#define VERSATILE_SYS_PCICTL_OFFSET 0x44 -#define VERSATILE_SYS_MCI_OFFSET 0x48 -#define VERSATILE_SYS_FLASH_OFFSET 0x4C -#define VERSATILE_SYS_CLCD_OFFSET 0x50 -#define VERSATILE_SYS_CLCDSER_OFFSET 0x54 -#define VERSATILE_SYS_BOOTCS_OFFSET 0x58 -#define VERSATILE_SYS_24MHz_OFFSET 0x5C -#define VERSATILE_SYS_MISC_OFFSET 0x60 -#define VERSATILE_SYS_TEST_OSC0_OFFSET 0x80 -#define VERSATILE_SYS_TEST_OSC1_OFFSET 0x84 -#define VERSATILE_SYS_TEST_OSC2_OFFSET 0x88 -#define VERSATILE_SYS_TEST_OSC3_OFFSET 0x8C -#define VERSATILE_SYS_TEST_OSC4_OFFSET 0x90 - -#define VERSATILE_SYS_BASE 0x10000000 -#define VERSATILE_SYS_ID (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET) -#define VERSATILE_SYS_SW (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET) -#define VERSATILE_SYS_LED (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET) -#define VERSATILE_SYS_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET) -#define VERSATILE_SYS_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET) - -#if defined(CONFIG_ARCH_VERSATILE_PB) -#define VERSATILE_SYS_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET) -#define VERSATILE_SYS_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET) -#define VERSATILE_SYS_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET) -#endif - -#define VERSATILE_SYS_LOCK (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET) -#define VERSATILE_SYS_100HZ (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET) -#define VERSATILE_SYS_CFGDATA1 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET) -#define VERSATILE_SYS_CFGDATA2 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET) -#define VERSATILE_SYS_FLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET) -#define VERSATILE_SYS_FLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET) -#define VERSATILE_SYS_FLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET) -#define VERSATILE_SYS_NVFLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET) -#define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET) -#define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET) -#define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET) -#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET) -#define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET) -#define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) -#define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET) -#define VERSATILE_SYS_CLCDSER (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET) -#define VERSATILE_SYS_BOOTCS (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET) -#define VERSATILE_SYS_24MHz (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET) -#define VERSATILE_SYS_MISC (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET) -#define VERSATILE_SYS_TEST_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET) -#define VERSATILE_SYS_TEST_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET) -#define VERSATILE_SYS_TEST_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET) -#define VERSATILE_SYS_TEST_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET) -#define VERSATILE_SYS_TEST_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET) - -/* - * Values for VERSATILE_SYS_RESET_CTRL - */ -#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define VERSATILE_SYS_CTRL_RESET_DLLRESET 0x03 -#define VERSATILE_SYS_CTRL_RESET_PLLRESET 0x04 -#define VERSATILE_SYS_CTRL_RESET_POR 0x05 -#define VERSATILE_SYS_CTRL_RESET_DoC 0x06 - -#define VERSATILE_SYS_CTRL_LED (1 << 0) - - -/* ------------------------------------------------------------------------ - * Versatile control registers - * ------------------------------------------------------------------------ - */ - -/* - * VERSATILE_IDFIELD - * - * 31:24 = manufacturer (0x41 = ARM) - * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) - * 15:12 = FPGA (0x3 = XVC600 or XVC600E) - * 11:4 = build value - * 3:0 = revision number (0x1 = rev B (AHB)) - */ - -/* - * VERSATILE_SYS_LOCK - * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, - * SYS_CLD, SYS_BOOTCS - */ -#define VERSATILE_SYS_LOCK_LOCKED (1 << 16) -#define VERSATILE_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ - -/* - * VERSATILE_SYS_FLASH - */ -#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ - -/* - * VERSATILE_INTREG - * - used to acknowledge and control MMCI and UART interrupts - */ -#define VERSATILE_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ -#define VERSATILE_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ -#define VERSATILE_INTREG_CARDIN 0x08 /* MMCI card in detect */ - /* write 1 to acknowledge and clear */ -#define VERSATILE_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ -#define VERSATILE_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ - -/* - * VERSATILE peripheral addresses - */ -#define VERSATILE_PCI_CORE_BASE 0x10001000 /* PCI core control */ -#define VERSATILE_I2C_BASE 0x10002000 /* I2C control */ -#define VERSATILE_SIC_BASE 0x10003000 /* Secondary interrupt controller */ -#define VERSATILE_AACI_BASE 0x10004000 /* Audio */ -#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ -#define VERSATILE_KMI0_BASE 0x10006000 /* KMI interface */ -#define VERSATILE_KMI1_BASE 0x10007000 /* KMI 2nd interface */ -#define VERSATILE_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define VERSATILE_UART3_BASE 0x10009000 /* UART 3 */ -#define VERSATILE_SCI1_BASE 0x1000A000 -#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ - /* 0x1000C000 - 0x1000CFFF = reserved */ -#define VERSATILE_ETH_BASE 0x10010000 /* Ethernet */ -#define VERSATILE_USB_BASE 0x10020000 /* USB */ - /* 0x10030000 - 0x100FFFFF = reserved */ -#define VERSATILE_SMC_BASE 0x10100000 /* SMC */ -#define VERSATILE_MPMC_BASE 0x10110000 /* MPMC */ -#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ -#define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */ -#define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */ -#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ - /* 0x10000000 - 0x100FFFFF */ -#define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */ -#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ -#define VERSATILE_WATCHDOG_BASE 0x101E1000 /* Watchdog */ -#define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */ -#define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */ -#define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */ -#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ -#define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */ -#define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */ -#define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */ - /* 0x101E9000 - reserved */ -#define VERSATILE_SCI_BASE 0x101F0000 /* Smart card controller */ -#define VERSATILE_UART0_BASE 0x101F1000 /* Uart 0 */ -#define VERSATILE_UART1_BASE 0x101F2000 /* Uart 1 */ -#define VERSATILE_UART2_BASE 0x101F3000 /* Uart 2 */ -#define VERSATILE_SSP_BASE 0x101F4000 /* Synchronous Serial Port */ - -#define VERSATILE_SSMC_BASE 0x20000000 /* SSMC */ -#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ -#define VERSATILE_MBX_BASE 0x40000000 /* MBX */ - -/* PCI space */ -#define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */ -#define VERSATILE_PCI_CFG_BASE 0x42000000 -#define VERSATILE_PCI_MEM_BASE0 0x44000000 -#define VERSATILE_PCI_MEM_BASE1 0x50000000 -#define VERSATILE_PCI_MEM_BASE2 0x60000000 -/* Sizes of above maps */ -#define VERSATILE_PCI_BASE_SIZE 0x01000000 -#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000 -#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ -#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ -#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ - -#define VERSATILE_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define VERSATILE_LT_BASE 0x80000000 /* Logic Tile expansion */ - -/* - * Disk on Chip - */ -#define VERSATILE_DOC_BASE 0x2C000000 -#define VERSATILE_DOC_SIZE (16 << 20) -#define VERSATILE_DOC_PAGE_SIZE 512 -#define VERSATILE_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) - -#define ERASE_UNIT_PAGES 32 -#define START_PAGE 0x80 - -/* - * LED settings, bits [7:0] - */ -#define VERSATILE_SYS_LED0 (1 << 0) -#define VERSATILE_SYS_LED1 (1 << 1) -#define VERSATILE_SYS_LED2 (1 << 2) -#define VERSATILE_SYS_LED3 (1 << 3) -#define VERSATILE_SYS_LED4 (1 << 4) -#define VERSATILE_SYS_LED5 (1 << 5) -#define VERSATILE_SYS_LED6 (1 << 6) -#define VERSATILE_SYS_LED7 (1 << 7) - -#define ALL_LEDS 0xFF - -#define LED_BANK VERSATILE_SYS_LED - -/* - * Control registers - */ -#define VERSATILE_IDFIELD_OFFSET 0x0 /* Versatile build information */ -#define VERSATILE_FLASHPROG_OFFSET 0x4 /* Flash devices */ -#define VERSATILE_INTREG_OFFSET 0x8 /* Interrupt control */ -#define VERSATILE_DECODE_OFFSET 0xC /* Fitted logic modules */ - - -/* ------------------------------------------------------------------------ - * Versatile Interrupt Controller - control registers - * ------------------------------------------------------------------------ - * - * Offsets from interrupt controller base - * - * System Controller interrupt controller base is - * - * VERSATILE_IC_BASE - * - * Core Module interrupt controller base is - * - * VERSATILE_SYS_IC - * - */ -/* VIC definitions in include/asm-arm/hardware/vic.h */ - -#define SIC_IRQ_STATUS 0 -#define SIC_IRQ_RAW_STATUS 0x04 -#define SIC_IRQ_ENABLE 0x08 -#define SIC_IRQ_ENABLE_SET 0x08 -#define SIC_IRQ_ENABLE_CLEAR 0x0C -#define SIC_INT_SOFT_SET 0x10 -#define SIC_INT_SOFT_CLEAR 0x14 -#define SIC_INT_PIC_ENABLE 0x20 /* read status of pass through mask */ -#define SIC_INT_PIC_ENABLES 0x20 /* set interrupt pass through bits */ -#define SIC_INT_PIC_ENABLEC 0x24 /* Clear interrupt pass through bits */ - -/* ------------------------------------------------------------------------ - * Interrupts - bit assignment (primary) - * ------------------------------------------------------------------------ - */ - -#define INT_WDOGINT 0 /* Watchdog timer */ -#define INT_SOFTINT 1 /* Software interrupt */ -#define INT_COMMRx 2 /* Debug Comm Rx interrupt */ -#define INT_COMMTx 3 /* Debug Comm Tx interrupt */ -#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */ -#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */ -#define INT_GPIOINT0 6 /* GPIO 0 */ -#define INT_GPIOINT1 7 /* GPIO 1 */ -#define INT_GPIOINT2 8 /* GPIO 2 */ -#define INT_GPIOINT3 9 /* GPIO 3 */ -#define INT_RTCINT 10 /* Real Time Clock */ -#define INT_SSPINT 11 /* Synchronous Serial Port */ -#define INT_UARTINT0 12 /* UART 0 on development chip */ -#define INT_UARTINT1 13 /* UART 1 on development chip */ -#define INT_UARTINT2 14 /* UART 2 on development chip */ -#define INT_SCIINT 15 /* Smart Card Interface */ -#define INT_CLCDINT 16 /* CLCD controller */ -#define INT_DMAINT 17 /* DMA controller */ -#define INT_PWRFAILINT 18 /* Power failure */ -#define INT_MBXINT 19 /* Graphics processor */ -#define INT_GNDINT 20 /* Reserved */ - /* External interrupt signals from logic tiles or secondary controller */ -#define INT_VICSOURCE21 21 /* Disk on Chip */ -#define INT_VICSOURCE22 22 /* MCI0A */ -#define INT_VICSOURCE23 23 /* MCI1A */ -#define INT_VICSOURCE24 24 /* AACI */ -#define INT_VICSOURCE25 25 /* Ethernet */ -#define INT_VICSOURCE26 26 /* USB */ -#define INT_VICSOURCE27 27 /* PCI 0 */ -#define INT_VICSOURCE28 28 /* PCI 1 */ -#define INT_VICSOURCE29 29 /* PCI 2 */ -#define INT_VICSOURCE30 30 /* PCI 3 */ -#define INT_VICSOURCE31 31 /* SIC source */ - -/* - * Interrupt bit positions - * - */ -#define INTMASK_WDOGINT (1 << INT_WDOGINT) -#define INTMASK_SOFTINT (1 << INT_SOFTINT) -#define INTMASK_COMMRx (1 << INT_COMMRx) -#define INTMASK_COMMTx (1 << INT_COMMTx) -#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1) -#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3) -#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0) -#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1) -#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2) -#define INTMASK_GPIOINT3 (1 << INT_GPIOINT3) -#define INTMASK_RTCINT (1 << INT_RTCINT) -#define INTMASK_SSPINT (1 << INT_SSPINT) -#define INTMASK_UARTINT0 (1 << INT_UARTINT0) -#define INTMASK_UARTINT1 (1 << INT_UARTINT1) -#define INTMASK_UARTINT2 (1 << INT_UARTINT2) -#define INTMASK_SCIINT (1 << INT_SCIINT) -#define INTMASK_CLCDINT (1 << INT_CLCDINT) -#define INTMASK_DMAINT (1 << INT_DMAINT) -#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT) -#define INTMASK_MBXINT (1 << INT_MBXINT) -#define INTMASK_GNDINT (1 << INT_GNDINT) -#define INTMASK_VICSOURCE21 (1 << INT_VICSOURCE21) -#define INTMASK_VICSOURCE22 (1 << INT_VICSOURCE22) -#define INTMASK_VICSOURCE23 (1 << INT_VICSOURCE23) -#define INTMASK_VICSOURCE24 (1 << INT_VICSOURCE24) -#define INTMASK_VICSOURCE25 (1 << INT_VICSOURCE25) -#define INTMASK_VICSOURCE26 (1 << INT_VICSOURCE26) -#define INTMASK_VICSOURCE27 (1 << INT_VICSOURCE27) -#define INTMASK_VICSOURCE28 (1 << INT_VICSOURCE28) -#define INTMASK_VICSOURCE29 (1 << INT_VICSOURCE29) -#define INTMASK_VICSOURCE30 (1 << INT_VICSOURCE30) -#define INTMASK_VICSOURCE31 (1 << INT_VICSOURCE31) - - -#define VERSATILE_SC_VALID_INT 0x003FFFFF - -#define MAXIRQNUM 31 -#define MAXFIQNUM 31 -#define MAXSWINUM 31 - -/* ------------------------------------------------------------------------ - * Interrupts - bit assignment (secondary) - * ------------------------------------------------------------------------ - */ -#define SIC_INT_MMCI0B 1 /* Multimedia Card 0B */ -#define SIC_INT_MMCI1B 2 /* Multimedia Card 1B */ -#define SIC_INT_KMI0 3 /* Keyboard/Mouse port 0 */ -#define SIC_INT_KMI1 4 /* Keyboard/Mouse port 1 */ -#define SIC_INT_SCI3 5 /* Smart Card interface */ -#define SIC_INT_UART3 6 /* UART 3 empty or data available */ -#define SIC_INT_CLCD 7 /* Character LCD */ -#define SIC_INT_TOUCH 8 /* Touchscreen */ -#define SIC_INT_KEYPAD 9 /* Key pressed on display keypad */ - /* 10:20 - reserved */ -#define SIC_INT_DoC 21 /* Disk on Chip memory controller */ -#define SIC_INT_MMCI0A 22 /* MMC 0A */ -#define SIC_INT_MMCI1A 23 /* MMC 1A */ -#define SIC_INT_AACI 24 /* Audio Codec */ -#define SIC_INT_ETH 25 /* Ethernet controller */ -#define SIC_INT_USB 26 /* USB controller */ -#define SIC_INT_PCI0 27 -#define SIC_INT_PCI1 28 -#define SIC_INT_PCI2 29 -#define SIC_INT_PCI3 30 - - -#define SIC_INTMASK_MMCI0B (1 << SIC_INT_MMCI0B) -#define SIC_INTMASK_MMCI1B (1 << SIC_INT_MMCI1B) -#define SIC_INTMASK_KMI0 (1 << SIC_INT_KMI0) -#define SIC_INTMASK_KMI1 (1 << SIC_INT_KMI1) -#define SIC_INTMASK_SCI3 (1 << SIC_INT_SCI3) -#define SIC_INTMASK_UART3 (1 << SIC_INT_UART3) -#define SIC_INTMASK_CLCD (1 << SIC_INT_CLCD) -#define SIC_INTMASK_TOUCH (1 << SIC_INT_TOUCH) -#define SIC_INTMASK_KEYPAD (1 << SIC_INT_KEYPAD) -#define SIC_INTMASK_DoC (1 << SIC_INT_DoC) -#define SIC_INTMASK_MMCI0A (1 << SIC_INT_MMCI0A) -#define SIC_INTMASK_MMCI1A (1 << SIC_INT_MMCI1A) -#define SIC_INTMASK_AACI (1 << SIC_INT_AACI) -#define SIC_INTMASK_ETH (1 << SIC_INT_ETH) -#define SIC_INTMASK_USB (1 << SIC_INT_USB) -#define SIC_INTMASK_PCI0 (1 << SIC_INT_PCI0) -#define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1) -#define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2) -#define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3) -/* - * Application Flash - * - */ -#define FLASH_BASE VERSATILE_FLASH_BASE -#define FLASH_SIZE VERSATILE_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE VERSATILE_BOOT_ROM_HI -#define EPROM_SIZE VERSATILE_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE EPROM_BASE - -/* - * System controller bit assignment - */ -#define VERSATILE_REFCLK 0 -#define VERSATILE_TIMCLK 1 - -#define VERSATILE_TIMER1_EnSel 15 -#define VERSATILE_TIMER2_EnSel 17 -#define VERSATILE_TIMER3_EnSel 19 -#define VERSATILE_TIMER4_EnSel 21 - - -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - -#define VERSATILE_CSR_BASE 0x10000000 -#define VERSATILE_CSR_SIZE 0x10000000 - -#ifdef CONFIG_MACH_VERSATILE_AB -/* - * IB2 Versatile/AB expansion board definitions - */ -#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE -#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000) - -/* VICINTSOURCE27 */ -#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000) -#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0) -#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4) - -#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) -#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0) -#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4) -#endif - -#endif - -/* END */ diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h deleted file mode 100644 index 3ea4e07b58c..00000000000 --- a/include/asm-arm/arch-versatile/system.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - u32 val; - - val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7; - val |= 0x105; - - __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK)); - __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL)); - __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK)); -} - -#endif diff --git a/include/asm-arm/arch-versatile/timex.h b/include/asm-arm/arch-versatile/timex.h deleted file mode 100644 index 38fd04fc914..00000000000 --- a/include/asm-arm/arch-versatile/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/timex.h - * - * Versatile architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h deleted file mode 100644 index 7215133d051..00000000000 --- a/include/asm-arm/arch-versatile/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define AMBA_UART_DR (*(volatile unsigned char *)0x101F1000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0x101F102C) -#define AMBA_UART_CR (*(volatile unsigned char *)0x101F1030) -#define AMBA_UART_FR (*(volatile unsigned char *)0x101F1018) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/include/asm-arm/arch-versatile/vmalloc.h deleted file mode 100644 index ac780df6215..00000000000 --- a/include/asm-arm/arch-versatile/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/vmalloc.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h index d08a1f2863e..5106acaa1d0 100644 --- a/include/asm-arm/plat-s3c/iic.h +++ b/include/asm-arm/plat-s3c/iic.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/iic.h +/* arch/arm/mach-s3c2410/include/mach/iic.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h index ad6bbe90616..f4dcd14af05 100644 --- a/include/asm-arm/plat-s3c/nand.h +++ b/include/asm-arm/plat-s3c/nand.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/nand.h +/* arch/arm/mach-s3c2410/include/mach/nand.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h index b004dee6bca..c3878f7acb8 100644 --- a/include/asm-arm/plat-s3c/regs-ac97.h +++ b/include/asm-arm/plat-s3c/regs-ac97.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h +/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h * * Copyright (c) 2006 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h index c7f231963e7..4323cccc86c 100644 --- a/include/asm-arm/plat-s3c/regs-adc.h +++ b/include/asm-arm/plat-s3c/regs-adc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-adc.h +/* arch/arm/mach-s3c2410/include/mach/regs-adc.h * * Copyright (c) 2004 Shannon Holland * diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h index 2ae29522f25..2f7c17de8ac 100644 --- a/include/asm-arm/plat-s3c/regs-iic.h +++ b/include/asm-arm/plat-s3c/regs-iic.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-iic.h +/* arch/arm/mach-s3c2410/include/mach/regs-iic.h * * Copyright (c) 2004 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h index d742205ac17..09f0b5503f5 100644 --- a/include/asm-arm/plat-s3c/regs-nand.h +++ b/include/asm-arm/plat-s3c/regs-nand.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-nand.h +/* arch/arm/mach-s3c2410/include/mach/regs-nand.h * * Copyright (c) 2004,2005 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h index 93b03c49710..d5837cf8e40 100644 --- a/include/asm-arm/plat-s3c/regs-rtc.h +++ b/include/asm-arm/plat-s3c/regs-rtc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h +/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h index 923e114db66..a0daa647b92 100644 --- a/include/asm-arm/plat-s3c/regs-serial.h +++ b/include/asm-arm/plat-s3c/regs-serial.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-serial.h +/* arch/arm/mach-s3c2410/include/mach/regs-serial.h * * From linux/include/asm-arm/hardware/serial_s3c2410.h * diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h index b5bc692f348..b4366ea3967 100644 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ b/include/asm-arm/plat-s3c/regs-timer.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-timer.h +/* arch/arm/mach-s3c2410/include/mach/regs-timer.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h index 56c4193b7a4..1229f076c0a 100644 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ b/include/asm-arm/plat-s3c/regs-watchdog.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-watchdog.h +/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h index eaf77916a60..a6f1d5df13b 100644 --- a/include/asm-arm/plat-s3c24xx/regs-iis.h +++ b/include/asm-arm/plat-s3c24xx/regs-iis.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-iis.h +/* arch/arm/mach-s3c2410/include/mach/regs-iis.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h index ea565b007d0..2b35479ee35 100644 --- a/include/asm-arm/plat-s3c24xx/regs-spi.h +++ b/include/asm-arm/plat-s3c24xx/regs-spi.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-spi.h +/* arch/arm/mach-s3c2410/include/mach/regs-spi.h * * Copyright (c) 2004 Fetron GmbH * diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h index e1e9805d2d9..f0dd4a41b37 100644 --- a/include/asm-arm/plat-s3c24xx/regs-udc.h +++ b/include/asm-arm/plat-s3c24xx/regs-udc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-udc.h +/* arch/arm/mach-s3c2410/include/mach/regs-udc.h * * Copyright (C) 2004 Herbert Poetzl * diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h index b8aa6cb69b5..546bb4008f4 100644 --- a/include/asm-arm/plat-s3c24xx/udc.h +++ b/include/asm-arm/plat-s3c24xx/udc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/udc.h +/* arch/arm/mach-s3c2410/include/mach/udc.h * * Copyright (c) 2005 Arnaud Patard * -- cgit v1.2.3 From 6f088f1d215be5250582b974f83f0e3aa6ad3a28 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 9 Aug 2008 13:44:58 +0200 Subject: [ARM] Move include/asm-arm/plat-orion to arch/arm/plat-orion/include/plat This patch performs the equivalent include directory shuffle for plat-orion, and fixes up all users. Signed-off-by: Lennert Buytenhek --- include/asm-arm/plat-orion/cache-feroceon-l2.h | 11 --------- include/asm-arm/plat-orion/ehci-orion.h | 19 --------------- include/asm-arm/plat-orion/irq.h | 17 -------------- include/asm-arm/plat-orion/mv_xor.h | 28 ---------------------- include/asm-arm/plat-orion/orion_nand.h | 25 -------------------- include/asm-arm/plat-orion/pcie.h | 32 -------------------------- include/asm-arm/plat-orion/time.h | 17 -------------- 7 files changed, 149 deletions(-) delete mode 100644 include/asm-arm/plat-orion/cache-feroceon-l2.h delete mode 100644 include/asm-arm/plat-orion/ehci-orion.h delete mode 100644 include/asm-arm/plat-orion/irq.h delete mode 100644 include/asm-arm/plat-orion/mv_xor.h delete mode 100644 include/asm-arm/plat-orion/orion_nand.h delete mode 100644 include/asm-arm/plat-orion/pcie.h delete mode 100644 include/asm-arm/plat-orion/time.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-orion/cache-feroceon-l2.h b/include/asm-arm/plat-orion/cache-feroceon-l2.h deleted file mode 100644 index ba4e016d3ec..00000000000 --- a/include/asm-arm/plat-orion/cache-feroceon-l2.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-arm/plat-orion/cache-feroceon-l2.h - * - * Copyright (C) 2008 Marvell Semiconductor - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -extern void __init feroceon_l2_init(int l2_wt_override); diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/include/asm-arm/plat-orion/ehci-orion.h deleted file mode 100644 index 785705651e2..00000000000 --- a/include/asm-arm/plat-orion/ehci-orion.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/plat-orion/ehci-orion.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_PLAT_ORION_EHCI_ORION_H -#define __ASM_PLAT_ORION_EHCI_ORION_H - -#include - -struct orion_ehci_data { - struct mbus_dram_target_info *dram; -}; - - -#endif diff --git a/include/asm-arm/plat-orion/irq.h b/include/asm-arm/plat-orion/irq.h deleted file mode 100644 index 94aeed919d5..00000000000 --- a/include/asm-arm/plat-orion/irq.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/plat-orion/irq.h - * - * Marvell Orion SoC IRQ handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_PLAT_ORION_IRQ_H -#define __ASM_PLAT_ORION_IRQ_H - -void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); - - -#endif diff --git a/include/asm-arm/plat-orion/mv_xor.h b/include/asm-arm/plat-orion/mv_xor.h deleted file mode 100644 index c349e8ff5cc..00000000000 --- a/include/asm-arm/plat-orion/mv_xor.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Marvell XOR platform device data definition file. - */ - -#ifndef __ASM_PLAT_ORION_MV_XOR_H -#define __ASM_PLAT_ORION_MV_XOR_H - -#include -#include - -#define MV_XOR_SHARED_NAME "mv_xor_shared" -#define MV_XOR_NAME "mv_xor" - -struct mbus_dram_target_info; - -struct mv_xor_platform_shared_data { - struct mbus_dram_target_info *dram; -}; - -struct mv_xor_platform_data { - struct platform_device *shared; - int hw_id; - dma_cap_mask_t cap_mask; - size_t pool_size; -}; - - -#endif diff --git a/include/asm-arm/plat-orion/orion_nand.h b/include/asm-arm/plat-orion/orion_nand.h deleted file mode 100644 index ad4ce94c199..00000000000 --- a/include/asm-arm/plat-orion/orion_nand.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-arm/plat-orion/orion_nand.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_PLAT_ORION_ORION_NAND_H -#define __ASM_PLAT_ORION_ORION_NAND_H - -/* - * Device bus NAND private data - */ -struct orion_nand_data { - struct mtd_partition *parts; - u32 nr_parts; - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 width; /* buswidth */ - u8 chip_delay; -}; - - -#endif diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h deleted file mode 100644 index e61b7bd97af..00000000000 --- a/include/asm-arm/plat-orion/pcie.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/plat-orion/pcie.h - * - * Marvell Orion SoC PCIe handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_PLAT_ORION_PCIE_H -#define __ASM_PLAT_ORION_PCIE_H - -u32 orion_pcie_dev_id(void __iomem *base); -u32 orion_pcie_rev(void __iomem *base); -int orion_pcie_link_up(void __iomem *base); -int orion_pcie_x4_mode(void __iomem *base); -int orion_pcie_get_local_bus_nr(void __iomem *base); -void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); -void orion_pcie_setup(void __iomem *base, - struct mbus_dram_target_info *dram); -int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, - u32 devfn, int where, int size, u32 *val); -int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, - u32 devfn, int where, int size, u32 *val); -int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus, - u32 devfn, int where, int size, u32 *val); -int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus, - u32 devfn, int where, int size, u32 val); - - -#endif diff --git a/include/asm-arm/plat-orion/time.h b/include/asm-arm/plat-orion/time.h deleted file mode 100644 index 0e85cc8f44d..00000000000 --- a/include/asm-arm/plat-orion/time.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/plat-orion/time.h - * - * Marvell Orion SoC time handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_PLAT_ORION_TIME_H -#define __ASM_PLAT_ORION_TIME_H - -void orion_time_init(unsigned int irq, unsigned int tclk); - - -#endif -- cgit v1.2.3 From 631c9a8a79b9b94eef56afa3bff107ce27c4c2bb Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 8 Aug 2008 21:34:10 +0100 Subject: [ARM] S3C24XX: Compilation fix if s3c2410 is not selected This patch fixes compilation error if no s3c2410 processor is selected but the s3c244x is selected. The function s3c2410_baseclk_add() is now available for all Samsung cpus. Signed-off-by: Krzysztof Helt [ben-linux@fluff.org: Whitespace and description fixups] Signed-off-by: Ben Dooks --- include/asm-arm/plat-s3c24xx/s3c2410.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h index 36de0b83587..3cd1ec677b3 100644 --- a/include/asm-arm/plat-s3c24xx/s3c2410.h +++ b/include/asm-arm/plat-s3c24xx/s3c2410.h @@ -21,11 +21,11 @@ extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); -extern int s3c2410_baseclk_add(void); - #else #define s3c2410_init_clocks NULL #define s3c2410_init_uarts NULL #define s3c2410_map_io NULL #define s3c2410_init NULL #endif + +extern int s3c2410_baseclk_add(void); -- cgit v1.2.3 From 66bfa2f03191aec2e2958414b1dfb80a56637133 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 10 Aug 2008 15:25:55 +0100 Subject: [ARM] 5191/1: ARM: remove CVS keywords This patch removes CVS keywords that weren't updated for a long time. Signed-off-by: Adrian Bunk Signed-off-by: Russell King --- include/asm-arm/plat-s3c/regs-nand.h | 2 +- include/asm-arm/plat-s3c/regs-timer.h | 2 +- include/asm-arm/plat-s3c/regs-watchdog.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h index 09f0b5503f5..b2caa4bca27 100644 --- a/include/asm-arm/plat-s3c/regs-nand.h +++ b/include/asm-arm/plat-s3c/regs-nand.h @@ -11,7 +11,7 @@ */ #ifndef __ASM_ARM_REGS_NAND -#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $" +#define __ASM_ARM_REGS_NAND #define S3C2410_NFREG(x) (x) diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h index b4366ea3967..cc0eedd53e3 100644 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ b/include/asm-arm/plat-s3c/regs-timer.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_REGS_TIMER_H -#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $" +#define __ASM_ARCH_REGS_TIMER_H #define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) #define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h index 1229f076c0a..4938492470f 100644 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ b/include/asm-arm/plat-s3c/regs-watchdog.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_REGS_WATCHDOG_H -#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $" +#define __ASM_ARCH_REGS_WATCHDOG_H #define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) -- cgit v1.2.3