From efe90d273b6f365d37c0f82fbbd68a40982c3265 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 8 Dec 2006 15:22:20 +0000 Subject: [ARM] Handle HWCAP_VFP in VFP support code Don't set HWCAP_VFP in the processor support file; not only does it depend on the processor features, but it also depends on the support code being present. Therefore, only set it if the support code detects that we have a VFP coprocessor attached. Also, move the VFP handling of the coprocessor access register into the VFP support code. Signed-off-by: Russell King --- include/asm-arm/system.h | 43 ++++++++++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 13 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index f05fbe31576..f60faccf01f 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -139,19 +139,36 @@ static inline int cpu_is_xsc3(void) #define cpu_is_xscale() 1 #endif -#define set_cr(x) \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c1, c0, 0 @ set CR" \ - : : "r" (x) : "cc") - -#define get_cr() \ - ({ \ - unsigned int __val; \ - __asm__ __volatile__( \ - "mrc p15, 0, %0, c1, c0, 0 @ get CR" \ - : "=r" (__val) : : "cc"); \ - __val; \ - }) +static inline unsigned int get_cr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_cr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" + : : "r" (val) : "cc"); +} + +#define CPACC_FULL(n) (3 << (n * 2)) +#define CPACC_SVC(n) (1 << (n * 2)) +#define CPACC_DISABLE(n) (0 << (n * 2)) + +static inline unsigned int get_copro_access(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" + : "=r" (val) : : "cc"); + return val; +} + +static inline void set_copro_access(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" + : : "r" (val) : "cc"); +} extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ -- cgit v1.2.3 From 9fddda232ca2de4d40ba9c3890e27bdb4f4f8bbd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 8 Dec 2006 00:08:33 +0100 Subject: [ARM] 4004/1: S3C24XX: UDC remove implict addition of VA to regs Remove the implicit addition of a virtual address to the UDC registers. This should have been done by ioremap() in the driver, not by a static map. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-udc.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h index 487861d5b49..3c8354619b6 100644 --- a/include/asm-arm/arch-s3c2410/regs-udc.h +++ b/include/asm-arm/arch-s3c2410/regs-udc.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_REGS_UDC_H #define __ASM_ARCH_REGS_UDC_H - -#define S3C2410_USBDREG(x) ((x) + S3C24XX_VA_USBDEV) +#define S3C2410_USBDREG(x) (x) #define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) #define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) @@ -136,8 +135,8 @@ #define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W #define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W -#define S3C2410_UDC_SETIX(x) \ - __raw_writel(S3C2410_UDC_INDEX_ ## x, S3C2410_UDC_INDEX_REG); +#define S3C2410_UDC_SETIX(base,x) \ + writel(S3C2410_UDC_INDEX_ ## x, base+S3C2410_UDC_INDEX_REG); #define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) -- cgit v1.2.3 From bca0b8e75f6b7cf52cf52c967286b72d84f9b37e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 9 Dec 2006 16:41:55 +0000 Subject: [ARM] Add sys_*at syscalls Later glibc requires the *at syscalls. Add them. Signed-off-by: Russell King --- include/asm-arm/unistd.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index d44c629d842..32b06eb5281 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -347,6 +347,19 @@ #define __NR_mbind (__NR_SYSCALL_BASE+319) #define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) #define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) +#define __NR_openat (__NR_SYSCALL_BASE+322) +#define __NR_mkdirat (__NR_SYSCALL_BASE+323) +#define __NR_mknodat (__NR_SYSCALL_BASE+324) +#define __NR_fchownat (__NR_SYSCALL_BASE+325) +#define __NR_futimesat (__NR_SYSCALL_BASE+326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) +#define __NR_unlinkat (__NR_SYSCALL_BASE+328) +#define __NR_renameat (__NR_SYSCALL_BASE+329) +#define __NR_linkat (__NR_SYSCALL_BASE+330) +#define __NR_symlinkat (__NR_SYSCALL_BASE+331) +#define __NR_readlinkat (__NR_SYSCALL_BASE+332) +#define __NR_fchmodat (__NR_SYSCALL_BASE+333) +#define __NR_faccessat (__NR_SYSCALL_BASE+334) /* * The following SWIs are ARM private. -- cgit v1.2.3 From ad1ae2fe7fe68414ef29eab3c87b48841f8b72f2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 13 Dec 2006 14:34:43 +0000 Subject: [ARM] Unuse another Linux PTE bit L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King --- include/asm-arm/cpu-multi32.h | 7 ++++--- include/asm-arm/cpu-single.h | 4 ++-- include/asm-arm/pgtable.h | 11 +++++++---- 3 files changed, 13 insertions(+), 9 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h index 4679f63688e..715e18a4add 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/include/asm-arm/cpu-multi32.h @@ -50,9 +50,10 @@ extern struct processor { */ void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); /* - * Set a PTE + * Set a possibly extended PTE. Non-extended PTEs should + * ignore 'ext'. */ - void (*set_pte)(pte_t *ptep, pte_t pte); + void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); } processor; #define cpu_proc_init() processor._proc_init() @@ -60,5 +61,5 @@ extern struct processor { #define cpu_reset(addr) processor.reset(addr) #define cpu_do_idle() processor._do_idle() #define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte(ptep, pte) processor.set_pte(ptep, pte) +#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) #define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h index 6723e67244f..0b120ee3609 100644 --- a/include/asm-arm/cpu-single.h +++ b/include/asm-arm/cpu-single.h @@ -28,7 +28,7 @@ #define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle) #define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area) #define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm) -#define cpu_set_pte __cpu_fn(CPU_NAME,_set_pte) +#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext) #include @@ -40,5 +40,5 @@ extern void cpu_proc_fin(void); extern int cpu_do_idle(void); extern void cpu_dcache_clean_area(void *, int); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); -extern void cpu_set_pte(pte_t *ptep, pte_t pte); +extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index 88cd5c784ef..b8cf2d5ec30 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -21,6 +21,7 @@ #include #include +#include /* * Just any arbitrary offset to the start of the vmalloc VM area: the @@ -170,7 +171,6 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define L_PTE_EXEC (1 << 6) #define L_PTE_DIRTY (1 << 7) #define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ -#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */ #ifndef __ASSEMBLY__ @@ -228,7 +228,7 @@ extern struct page *empty_zero_page; #define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) #define pte_none(pte) (!pte_val(pte)) -#define pte_clear(mm,addr,ptep) set_pte_at((mm),(addr),(ptep), __pte(0)) +#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) #define pte_page(pte) (pfn_to_page(pte_pfn(pte))) #define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) #define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) @@ -236,8 +236,11 @@ extern struct page *empty_zero_page; #define pte_unmap(pte) do { } while (0) #define pte_unmap_nested(pte) do { } while (0) -#define set_pte(ptep, pte) cpu_set_pte(ptep,pte) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) +#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) + +#define set_pte_at(mm,addr,ptep,pteval) do { \ + set_pte_ext(ptep, pteval, (addr) >= PAGE_OFFSET ? 0 : PTE_EXT_NG); \ + } while (0) /* * The following only work if pte_present() is true. -- cgit v1.2.3 From 02828845dda5ccf921ab2557c6ca17b6e7fc70e2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 13 Dec 2006 18:39:26 +0100 Subject: [ARM] 4016/1: prefetch macro is wrong wrt gcc's "delete-null-pointer-checks" optimization The gcc manual says: |`-fdelete-null-pointer-checks' | Use global dataflow analysis to identify and eliminate useless | checks for null pointers. The compiler assumes that dereferencing | a null pointer would have halted the program. If a pointer is | checked after it has already been dereferenced, it cannot be null. | Enabled at levels `-O2', `-O3', `-Os'. Now the problem can be seen with this test case: #include extern void bar(char *x); void foo(char *x) { prefetch(x); if (x) bar(x); } Because the constraint to the inline asm used in the prefetch() macro is a memory operand, gcc assumes that the asm code does dereference the pointer and the delete-null-pointer-checks optimization kicks in. Inspection of generated assembly for the above example shows that bar() is indeed called unconditionally without any test on the value of x. Of course in the prefetch case there is no real dereference and it cannot be assumed that a null pointer would have been caught at that point. This causes kernel oopses with constructs like hlist_for_each_entry() where the list's 'next' content is prefetched before the pointer is tested against NULL, and only when gcc feels like applying this optimization which doesn't happen all the time with more complex code. It appears that the way to prevent delete-null-pointer-checks optimization to occur in this case is to make prefetch() into a static inline function instead of a macro. At least this is what is done on x86_64 where a similar inline asm memory operand is used (I presume they would have seen the same problem if it didn't work) and resulting code for the above example confirms that. An alternative would consist of replacing the memory operand by a register operand containing the pointer, and use the addressing mode explicitly in the asm template. But that would be less optimal than an offsettable memory reference. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- include/asm-arm/processor.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h index b442e8e2a80..1bbf16182d6 100644 --- a/include/asm-arm/processor.h +++ b/include/asm-arm/processor.h @@ -103,14 +103,14 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); #if __LINUX_ARM_ARCH__ >= 5 #define ARCH_HAS_PREFETCH -#define prefetch(ptr) \ - ({ \ - __asm__ __volatile__( \ - "pld\t%0" \ - : \ - : "o" (*(char *)(ptr)) \ - : "cc"); \ - }) +static inline void prefetch(const void *ptr) +{ + __asm__ __volatile__( + "pld\t%0" + : + : "o" (*(char *)ptr) + : "cc"); +} #define ARCH_HAS_PREFETCHW #define prefetchw(ptr) prefetch(ptr) -- cgit v1.2.3 From 47fd705287e9377acd2a4cee9aeeea02867d2e54 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 13 Dec 2006 18:33:53 +0000 Subject: [ARM] Provide a method to alter the control register i.MX needs to tweak the control register to support CPU frequency scaling. Rather than have folk blindly try and change the control register by writing to it and then wondering why it doesn't work, provide a method (which is safe for UP only, and therefore only available for UP) to achieve this. Signed-off-by: Russell King --- include/asm-arm/system.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index f60faccf01f..e160aeb0138 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -173,6 +173,26 @@ static inline void set_copro_access(unsigned int val) extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ +#ifndef CONFIG_SMP +static inline void adjust_cr(unsigned long mask, unsigned long set) +{ + unsigned long flags, cr; + + mask &= ~CR_A; + + set &= mask; + + local_irq_save(flags); + + cr_no_alignment = (cr_no_alignment & ~mask) | set; + cr_alignment = (cr_alignment & ~mask) | set; + + set_cr((get_cr() & ~mask) | set); + + local_irq_restore(flags); +} +#endif + #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) #define UDBG_BADABORT (1 << 2) -- cgit v1.2.3 From 3c8cd0cce9ab8a25dbcf519cb0de00d2716f8379 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Wed, 6 Dec 2006 17:25:04 +0100 Subject: [ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support Support to change MX1 CPU frequency at runtime. Tested on PiKRON's PiMX1 board and seems to be fully stable up to 200 MHz end even as low as 8 MHz. Signed-off-by: Pavel Pisa Signed-off-by: Russell King --- include/asm-arm/arch-imx/imx-regs.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index a6912b3d867..e56a4e247d6 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -41,7 +41,13 @@ /* PLL registers */ #define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SYSTEM_SEL (1<<16) +#define CSCR_SPLL_RESTART (1<<22) +#define CSCR_MPLL_RESTART (1<<21) +#define CSCR_SYSTEM_SEL (1<<16) +#define CSCR_BCLK_DIV (0xf<<10) +#define CSCR_MPU_PRESC (1<<15) +#define CSCR_SPEN (1<<1) +#define CSCR_MPEN (1<<0) #define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ #define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ @@ -49,8 +55,6 @@ #define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ #define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ -#define CSCR_MPLL_RESTART (1<<21) - /* * GPIO Module and I/O Multiplexer * x = 0..3 for reg_A, reg_B, reg_C, reg_D -- cgit v1.2.3