From 1b2e2b73b4c84c918686c04a00724197036c0847 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 21 Aug 2006 17:06:38 +0100 Subject: [ARM] Cleanup arch/arm/mm a little Move top_pmd into arch/arm/mm/mm.h - nothing outside arch/arm/mm references it. Move the repeated definition of TOP_PTE into mm/mm.h, as well as a few function prototypes. Signed-off-by: Russell King --- include/asm-arm/page.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index b721270b998..af9c3fe7588 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -174,9 +174,6 @@ typedef unsigned long pgprot_t; #endif /* STRICT_MM_TYPECHECKS */ -/* the upper-most page table pointer */ -extern pmd_t *top_pmd; - #endif /* CONFIG_MMU */ #include -- cgit v1.2.3 From 7ad1bcb25c5623f1f87c50fdf2272f58ff91db5a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Aug 2006 12:07:02 +0100 Subject: [ARM] Add ARM irqtrace support This adds support for irqtrace for lockdep on ARM. Signed-off-by: Russell King --- include/asm-arm/irqflags.h | 132 +++++++++++++++++++++++++++++++++++++++++++++ include/asm-arm/system.h | 125 +----------------------------------------- 2 files changed, 133 insertions(+), 124 deletions(-) create mode 100644 include/asm-arm/irqflags.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/irqflags.h b/include/asm-arm/irqflags.h new file mode 100644 index 00000000000..6d09974e664 --- /dev/null +++ b/include/asm-arm/irqflags.h @@ -0,0 +1,132 @@ +#ifndef __ASM_ARM_IRQFLAGS_H +#define __ASM_ARM_IRQFLAGS_H + +#ifdef __KERNEL__ + +#include + +/* + * CPU interrupt mask handling. + */ +#if __LINUX_ARM_ARCH__ >= 6 + +#define raw_local_irq_save(x) \ + ({ \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_save\n" \ + "cpsid i" \ + : "=r" (x) : : "memory", "cc"); \ + }) + +#define raw_local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc") +#define raw_local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc") +#define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") +#define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") + +#else + +/* + * Save the current interrupt enable state & disable IRQs + */ +#define raw_local_irq_save(x) \ + ({ \ + unsigned long temp; \ + (void) (&temp == &x); \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_save\n" \ +" orr %1, %0, #128\n" \ +" msr cpsr_c, %1" \ + : "=r" (x), "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Enable IRQs + */ +#define raw_local_irq_enable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_enable\n" \ +" bic %0, %0, #128\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Disable IRQs + */ +#define raw_local_irq_disable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_disable\n" \ +" orr %0, %0, #128\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Enable FIQs + */ +#define local_fiq_enable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ stf\n" \ +" bic %0, %0, #64\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Disable FIQs + */ +#define local_fiq_disable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ clf\n" \ +" orr %0, %0, #64\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +#endif + +/* + * Save the current interrupt enable state. + */ +#define raw_local_save_flags(x) \ + ({ \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_save_flags" \ + : "=r" (x) : : "memory", "cc"); \ + }) + +/* + * restore saved IRQ & FIQ state + */ +#define raw_local_irq_restore(x) \ + __asm__ __volatile__( \ + "msr cpsr_c, %0 @ local_irq_restore\n" \ + : \ + : "r" (x) \ + : "memory", "cc") + +#define raw_irqs_disabled_flags(flags) \ +({ \ + (int)((flags) & PSR_I_BIT); \ +}) + +#endif +#endif diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 0947cbf9b69..174ff52661b 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -207,130 +207,7 @@ static inline void sched_cacheflush(void) { } -/* - * CPU interrupt mask handling. - */ -#if __LINUX_ARM_ARCH__ >= 6 - -#define local_irq_save(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ - "cpsid i" \ - : "=r" (x) : : "memory", "cc"); \ - }) - -#define local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc") -#define local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc") -#define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") -#define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") - -#else - -/* - * Save the current interrupt enable state & disable IRQs - */ -#define local_irq_save(x) \ - ({ \ - unsigned long temp; \ - (void) (&temp == &x); \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ -" orr %1, %0, #128\n" \ -" msr cpsr_c, %1" \ - : "=r" (x), "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Enable IRQs - */ -#define local_irq_enable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_enable\n" \ -" bic %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Disable IRQs - */ -#define local_irq_disable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_disable\n" \ -" orr %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Enable FIQs - */ -#define local_fiq_enable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ stf\n" \ -" bic %0, %0, #64\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Disable FIQs - */ -#define local_fiq_disable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ clf\n" \ -" orr %0, %0, #64\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -#endif - -/* - * Save the current interrupt enable state. - */ -#define local_save_flags(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_save_flags" \ - : "=r" (x) : : "memory", "cc"); \ - }) - -/* - * restore saved IRQ & FIQ state - */ -#define local_irq_restore(x) \ - __asm__ __volatile__( \ - "msr cpsr_c, %0 @ local_irq_restore\n" \ - : \ - : "r" (x) \ - : "memory", "cc") - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (int)(flags & PSR_I_BIT); \ -}) +#include #ifdef CONFIG_SMP -- cgit v1.2.3 From 6a39dd6222dda5ee2414a1b42e8e62118742a49e Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Wed, 30 Aug 2006 15:02:08 +0100 Subject: [ARM] 3759/2: Remove uses of %? Patch from Daniel Jacobowitz The ARM kernel has several uses of asm("foo%?"). %? is a GCC internal modifier used to output conditional execution predicates. However, no version of GCC supports conditionalizing asm statements. GCC 4.2 will correctly expand %? to the empty string in user asms. Earlier versions may reuse the condition from the previous instruction. In 'if (foo) asm ("bar%?");' this is somewhat likely to be right... but not reliable. So, the only safe thing to do is to remove the uses of %?. I believe the tlbflush.h occurances were supposed to be removed before, based on the comment about %? not working at the top of that file. Old versions of GCC could omit branches around user asms if the asm didn't mark the condition codes as clobbered. This problem hasn't been seen on any recent (3.x or 4.x) GCC, but it could theoretically happen. So, where %? was removed a cc clobber was added. Signed-off-by: Daniel Jacobowitz Signed-off-by: Russell King --- include/asm-arm/arch-l7200/io.h | 8 ++--- include/asm-arm/tlbflush.h | 76 ++++++++++++++++++++--------------------- 2 files changed, 42 insertions(+), 42 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h index cd080d8384d..d744d97c18a 100644 --- a/include/asm-arm/arch-l7200/io.h +++ b/include/asm-arm/arch-l7200/io.h @@ -31,9 +31,9 @@ static inline unsigned int __arch_getw(unsigned long a) { unsigned int value; - __asm__ __volatile__("ldr%?h %0, [%1, #0] @ getw" + __asm__ __volatile__("ldrh %0, [%1, #0] @ getw" : "=&r" (value) - : "r" (a)); + : "r" (a) : "cc"); return value; } @@ -42,8 +42,8 @@ static inline unsigned int __arch_getw(unsigned long a) static inline void __arch_putw(unsigned int value, unsigned long a) { - __asm__ __volatile__("str%?h %0, [%1, #0] @ putw" - : : "r" (value), "r" (a)); + __asm__ __volatile__("strh %0, [%1, #0] @ putw" + : : "r" (value), "r" (a) : "cc"); } /* diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index d97fc76189a..cd10a0b5f8a 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -247,16 +247,16 @@ static inline void local_flush_tlb_all(void) const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_WB)) - asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero)); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V3_FULL)) - asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL)) - asm("mcr%? p15, 0, %0, c8, c7, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL)) - asm("mcr%? p15, 0, %0, c8, c6, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) - asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } static inline void local_flush_tlb_mm(struct mm_struct *mm) @@ -266,25 +266,25 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_WB)) - asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero)); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) { if (tlb_flag(TLB_V3_FULL)) - asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_U_FULL)) - asm("mcr%? p15, 0, %0, c8, c7, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_D_FULL)) - asm("mcr%? p15, 0, %0, c8, c6, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_I_FULL)) - asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } if (tlb_flag(TLB_V6_U_ASID)) - asm("mcr%? p15, 0, %0, c8, c7, 2" : : "r" (asid)); + asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); if (tlb_flag(TLB_V6_D_ASID)) - asm("mcr%? p15, 0, %0, c8, c6, 2" : : "r" (asid)); + asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); if (tlb_flag(TLB_V6_I_ASID)) - asm("mcr%? p15, 0, %0, c8, c5, 2" : : "r" (asid)); + asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); } static inline void @@ -296,27 +296,27 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); if (tlb_flag(TLB_WB)) - asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero)); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero)); if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { if (tlb_flag(TLB_V3_PAGE)) - asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (uaddr)); + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (uaddr)); + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (uaddr)); + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr)); + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) - asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (uaddr)); + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (uaddr)); + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr)); + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); } static inline void local_flush_tlb_kernel_page(unsigned long kaddr) @@ -327,31 +327,31 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) kaddr &= PAGE_MASK; if (tlb_flag(TLB_WB)) - asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero)); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V3_PAGE)) - asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (kaddr)); + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (kaddr)); + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (kaddr)); + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (kaddr)); + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) - asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero)); + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (kaddr)); + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (kaddr)); + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (kaddr)); + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); /* The ARM ARM states that the completion of a TLB maintenance * operation is only guaranteed by a DSB instruction */ if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE)) - asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero)); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); } /* @@ -373,11 +373,11 @@ static inline void flush_pmd_entry(pmd_t *pmd) const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_DCLEAN)) - asm("mcr%? p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd)); + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); if (tlb_flag(TLB_WB)) - asm("mcr%? p15, 0, %0, c7, c10, 4 @ flush_pmd" - : : "r" (zero)); + asm("mcr p15, 0, %0, c7, c10, 4 @ flush_pmd" + : : "r" (zero) : "cc"); } static inline void clean_pmd_entry(pmd_t *pmd) @@ -385,8 +385,8 @@ static inline void clean_pmd_entry(pmd_t *pmd) const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_DCLEAN)) - asm("mcr%? p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd)); + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); } #undef tlb_flag -- cgit v1.2.3 From acc46c0144b6d1cf0d77bb8b4d1b7dcd5dc28d71 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 14 Sep 2006 00:28:26 +1000 Subject: [ARM] nommu: create flat.h to support uClinux flat binaries Create header with uClinux flat format binary support macros for ARM platforms. Derived from the m68knommu flat.h. Signed-off-by: Greg Ungerer Signed-off-by: Russell King --- include/asm-arm/flat.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 include/asm-arm/flat.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h new file mode 100644 index 00000000000..96694647858 --- /dev/null +++ b/include/asm-arm/flat.h @@ -0,0 +1,16 @@ +/* + * include/asm-arm/flat.h -- uClinux flat-format executables + */ + +#ifndef __ARM_FLAT_H__ +#define __ARM_FLAT_H__ + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 1 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) + +#endif /* __ARM_FLAT_H__ */ -- cgit v1.2.3 From fd88edd20fb0e8e2729aa8ce565316242189ceea Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 Sep 2006 23:34:34 +0100 Subject: [ARM] 3795/1: S3C24XX: add base AC97 registers Add base definitions for the AC97 register definitions. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/map.h | 5 +++++ include/asm-arm/arch-s3c2410/regs-ac97.h | 23 +++++++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 include/asm-arm/arch-s3c2410/regs-ac97.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 27ba0ac3fdd..7895042d176 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -160,6 +160,11 @@ #define S3C2440_PA_CAMIF (0x4F000000) #define S3C2440_SZ_CAMIF SZ_1M +/* AC97 */ + +#define S3C2440_PA_AC97 (0x5B000000) +#define S3C2440_SZ_AC97 SZ_1M + /* ISA style IO, for each machine to sort out mappings for, if it * implements it. We reserve two 16M regions for ISA. */ diff --git a/include/asm-arm/arch-s3c2410/regs-ac97.h b/include/asm-arm/arch-s3c2410/regs-ac97.h new file mode 100644 index 00000000000..bdd6a4f93d7 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-ac97.h @@ -0,0 +1,23 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h + * + * Copyright (c) 2006 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440 AC97 Controller +*/ + +#ifndef __ASM_ARCH_REGS_AC97_H +#define __ASM_ARCH_REGS_AC97_H __FILE__ + +#define S3C_AC97_GLBCTRL (0x00) +#define S3C_AC97_GLBSTAT (0x04) +#define S3C_AC97_CODEC_CMD (0x08) +#define S3C_AC97_PCM_ADDR (0x10) +#define S3C_AC97_PCM_DATA (0x18) +#define S3C_AC97_MIC_DATA (0x1C) + +#endif /* __ASM_ARCH_REGS_AC97_H */ -- cgit v1.2.3 From 505788cccbb96cd496b646594c8a5fcdc26bc2d9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 Sep 2006 23:42:24 +0100 Subject: [ARM] 3796/1: S3C24XX: Add per-cpu DMA channel mapper Allow each CPU type in the S3C24XX range to select the DMA channel mapping it supports. We change the DMA registration to use an virtual channel number that the DMA system will allocate to a hardware channel at request time. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/dma.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index 3661e465b0a..166fc89d62d 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -23,6 +23,36 @@ #define MAX_DMA_ADDRESS 0x40000000 #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ +/* We use `virtual` dma channels to hide the fact we have only a limited + * number of DMA channels, and not of all of them (dependant on the device) + * can be attached to any DMA source. We therefore let the DMA core handle + * the allocation of hardware channels to clients. +*/ + +enum dma_ch { + DMACH_XD0, + DMACH_XD1, + DMACH_SDI, + DMACH_SPI0, + DMACH_SPI1, + DMACH_UART0, + DMACH_UART1, + DMACH_UART2, + DMACH_TIMER, + DMACH_I2S_IN, + DMACH_I2S_OUT, + DMACH_PCM_IN, + DMACH_PCM_OUT, + DMACH_MIC_IN, + DMACH_USB_EP1, + DMACH_USB_EP2, + DMACH_USB_EP3, + DMACH_USB_EP4, + DMACH_MAX, /* the end entry */ +}; + +#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ + /* we have 4 dma channels */ #define S3C2410_DMA_CHANNELS (4) @@ -149,6 +179,8 @@ struct s3c2410_dma_stats { unsigned long timeout_failed; }; +struct s3c2410_dma_map; + /* struct s3c2410_dma_chan * * full state information for each DMA channel @@ -174,6 +206,8 @@ struct s3c2410_dma_chan { unsigned long load_timeout; unsigned int flags; /* channel flags */ + struct s3c24xx_dma_map *map; /* channel hw maps */ + /* channel's hardware position and configuration */ void __iomem *regs; /* channels registers */ void __iomem *addr_reg; /* data address register */ -- cgit v1.2.3 From 3e9fc8e5de0fb00226325cf34eb08411eb72ec6d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 16 Sep 2006 00:11:32 +0100 Subject: [ARM] 3804/1: S3C2442: LCD register update Add LCD register definitions for the S3C2442. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-lcd.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h index b306d6e3135..d8f1adfd17f 100644 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ b/include/asm-arm/arch-s3c2410/regs-lcd.h @@ -113,6 +113,13 @@ #define S3C2410_LCDINT_FRSYNC (1<<1) #define S3C2410_LCDINT_FICNT (1<<0) +/* s3c2442 extra stn registers */ + +#define S3C2442_REDLUT S3C2410_LCDREG(0x20) +#define S3C2442_GREENLUT S3C2410_LCDREG(0x24) +#define S3C2442_BLUELUT S3C2410_LCDREG(0x28) +#define S3C2442_DITHMODE S3C2410_LCDREG(0x20) + #define S3C2410_LPCSEL S3C2410_LCDREG(0x60) #define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) -- cgit v1.2.3 From 34148c6990d2f0107b53fe4ddf29b1ba30e613d3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 16 Sep 2006 00:12:53 +0100 Subject: [ARM] 3805/1: S3C2412: LCD register update Add LCD register definitions for the S3C2412. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-lcd.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h index d8f1adfd17f..6d7881c8cfc 100644 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ b/include/asm-arm/arch-s3c2410/regs-lcd.h @@ -63,6 +63,8 @@ #define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F) #define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF) +/* LDCCON4 changes for STN mode on the S3C2412 */ + #define S3C2410_LCDCON4_MVAL(x) ((x) << 8) #define S3C2410_LCDCON4_HSPW(x) ((x) << 0) #define S3C2410_LCDCON4_WLH(x) ((x) << 0) @@ -124,6 +126,27 @@ #define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) +/* S3C2412 registers */ + +#define S3C2412_TPAL S3C2410_LCDREG(0x20) + +#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24) +#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28) +#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C) + +#define S3C2412_TCONSEL S3C2410_LCDREG(0x30) + +#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34) +#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38) +#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C) +#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40) + +#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4)) +#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4)) +#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4)) + +#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4)) + #endif /* ___ASM_ARCH_REGS_LCD_H */ -- cgit v1.2.3 From 8dd5c845bbc26c3517398abc3e5477b4b42e7176 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 16 Sep 2006 10:47:18 +0100 Subject: [ARM] 3810/1: switch atomic helpers over to raw_local_irq_{save,restore} Now that we have raw_* variants of local_irq_$FOO(), switch the atomic helpers over to use those raw_* variants. This is necessary when using lockdep on pre-ARMv6 hardware, as lockdep uses atomic_t counters in the trace_hardirqs_off() path. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/atomic.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h index 4b0ce3e7de9..ea88aa6bfc7 100644 --- a/include/asm-arm/atomic.h +++ b/include/asm-arm/atomic.h @@ -128,10 +128,10 @@ static inline int atomic_add_return(int i, atomic_t *v) unsigned long flags; int val; - local_irq_save(flags); + raw_local_irq_save(flags); val = v->counter; v->counter = val += i; - local_irq_restore(flags); + raw_local_irq_restore(flags); return val; } @@ -141,10 +141,10 @@ static inline int atomic_sub_return(int i, atomic_t *v) unsigned long flags; int val; - local_irq_save(flags); + raw_local_irq_save(flags); val = v->counter; v->counter = val -= i; - local_irq_restore(flags); + raw_local_irq_restore(flags); return val; } @@ -154,11 +154,11 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new) int ret; unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); ret = v->counter; if (likely(ret == old)) v->counter = new; - local_irq_restore(flags); + raw_local_irq_restore(flags); return ret; } @@ -167,9 +167,9 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) { unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); *addr &= ~mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); } #endif /* __LINUX_ARM_ARCH__ */ -- cgit v1.2.3 From 51635ad282ead58b9d164f07e1fb62a9456b427c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 16 Sep 2006 10:50:22 +0100 Subject: [ARM] 3813/1: prevent >= 4G /dev/mem mmap() Prevent userland from mapping in physical address regions >= 4G by checking for that in valid_mmap_phys_addr_range(). Unfortunately, we cannot override valid_mmap_phys_addr_range() without also overriding valid_phys_addr_range(), so copy drivers/char/mem.c's version of valid_phys_addr_range() over to arch/arm/mm/mmap.c as well. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/io.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index bf7b9dea30f..8076a85c367 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -280,6 +280,10 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #define BIOVEC_MERGEABLE(vec1, vec2) \ ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); + /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access -- cgit v1.2.3 From 34348012d6b43eca5e241fe97381420d5758866c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 18 Sep 2006 23:52:03 +0100 Subject: [ARM] 3800/2: S3C2412: DMA channel mappings DMA channel mappings for the S3C2312 Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/dma.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index 166fc89d62d..7ac22483697 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -48,6 +48,9 @@ enum dma_ch { DMACH_USB_EP2, DMACH_USB_EP3, DMACH_USB_EP4, + DMACH_UART0_SRC2, /* s3c2412 second uart sources */ + DMACH_UART1_SRC2, + DMACH_UART2_SRC2, DMACH_MAX, /* the end entry */ }; @@ -317,6 +320,7 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); #define S3C2410_DMA_DCSRC (0x18) #define S3C2410_DMA_DCDST (0x1C) #define S3C2410_DMA_DMASKTRIG (0x20) +#define S3C2412_DMA_DMAREQSEL (0x24) #define S3C2410_DISRCC_INC (1<<0) #define S3C2410_DISRCC_APB (1<<1) @@ -383,4 +387,32 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); #define S3C2440_DCON_CH3_PCMOUT (6<<24) #endif +#ifdef CONFIG_CPU_S3C2412 + +#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2412_DMAREQSEL_HW (1) + +#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) +#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) +#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) +#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) +#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) +#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) +#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) +#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) +#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) +#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) +#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) +#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) +#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) +#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) +#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) +#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) +#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) +#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) +#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) +#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) + +#endif #endif /* __ASM_ARCH_DMA_H */ -- cgit v1.2.3 From 98954df6917cb8f7e65f4f0f79ed641112fcf6b6 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:02:25 +0100 Subject: [ARM] 3816/1: iop3xx: rename config symbols Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop3xx/debug-macro.S | 2 +- include/asm-arm/arch-iop3xx/entry-macro.S | 4 ++-- include/asm-arm/arch-iop3xx/iop321.h | 2 +- include/asm-arm/arch-iop3xx/iop331.h | 4 ++-- include/asm-arm/arch-iop3xx/irqs.h | 4 ++-- include/asm-arm/arch-iop3xx/memory.h | 6 +++--- include/asm-arm/arch-iop3xx/system.h | 4 ++-- include/asm-arm/arch-iop3xx/uncompress.h | 4 ++-- 8 files changed, 15 insertions(+), 15 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop3xx/debug-macro.S b/include/asm-arm/arch-iop3xx/debug-macro.S index ce007e53199..dcc6856d14f 100644 --- a/include/asm-arm/arch-iop3xx/debug-macro.S +++ b/include/asm-arm/arch-iop3xx/debug-macro.S @@ -15,7 +15,7 @@ mov \rx, #0xfe000000 @ physical #if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244) orr \rx, \rx, #0x00800000 @ location of the UART -#elif defined(CONFIG_ARCH_IOP331) +#elif defined(CONFIG_ARCH_IOP33X) mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0x000fe000 @ Physical Base diff --git a/include/asm-arm/arch-iop3xx/entry-macro.S b/include/asm-arm/arch-iop3xx/entry-macro.S index 926668c098a..f3db54637ad 100644 --- a/include/asm-arm/arch-iop3xx/entry-macro.S +++ b/include/asm-arm/arch-iop3xx/entry-macro.S @@ -9,7 +9,7 @@ */ #include -#if defined(CONFIG_ARCH_IOP321) +#if defined(CONFIG_ARCH_IOP32X) .macro disable_fiq .endm @@ -28,7 +28,7 @@ 1001: .endm -#elif defined(CONFIG_ARCH_IOP331) +#elif defined(CONFIG_ARCH_IOP33X) .macro disable_fiq .endm diff --git a/include/asm-arm/arch-iop3xx/iop321.h b/include/asm-arm/arch-iop3xx/iop321.h index f8df778a356..d198d72a50a 100644 --- a/include/asm-arm/arch-iop3xx/iop321.h +++ b/include/asm-arm/arch-iop3xx/iop321.h @@ -21,7 +21,7 @@ * IOP3xx variants but behave slightly differently on each. */ #ifndef __ASSEMBLY__ -#ifdef CONFIG_ARCH_IOP321 +#ifdef CONFIG_ARCH_IOP32X #define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420)) #else #define iop_is_321() 0 diff --git a/include/asm-arm/arch-iop3xx/iop331.h b/include/asm-arm/arch-iop3xx/iop331.h index fbf0cc11bdd..4d7bcc62cb3 100644 --- a/include/asm-arm/arch-iop3xx/iop331.h +++ b/include/asm-arm/arch-iop3xx/iop331.h @@ -20,7 +20,7 @@ * IOP3xx variants but behave slightly differently on each. */ #ifndef __ASSEMBLY__ -#ifdef CONFIG_ARCH_IOP331 +#ifdef CONFIG_ARCH_IOP33X /*#define iop_is_331() ((processor_id & 0xffffffb0) == 0x69054090) */ #define iop_is_331() ((processor_id & 0xffffff30) == 0x69054010) #else @@ -257,7 +257,7 @@ #define IOP331_TU_TISR (volatile u32 *)IOP331_REG_ADDR(0x000007E8) #define IOP331_TU_WDTCR (volatile u32 *)IOP331_REG_ADDR(0x000007EC) -#if defined(CONFIG_ARCH_IOP331) +#if defined(CONFIG_ARCH_IOP33X) #define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */ #endif diff --git a/include/asm-arm/arch-iop3xx/irqs.h b/include/asm-arm/arch-iop3xx/irqs.h index b2c03f4c269..4f7c7aa87b4 100644 --- a/include/asm-arm/arch-iop3xx/irqs.h +++ b/include/asm-arm/arch-iop3xx/irqs.h @@ -12,10 +12,10 @@ /* * Chipset-specific bits */ -#ifdef CONFIG_ARCH_IOP321 +#ifdef CONFIG_ARCH_IOP32X #include "iop321-irqs.h" #endif -#ifdef CONFIG_ARCH_IOP331 +#ifdef CONFIG_ARCH_IOP33X #include "iop331-irqs.h" #endif diff --git a/include/asm-arm/arch-iop3xx/memory.h b/include/asm-arm/arch-iop3xx/memory.h index e43ebd98474..25666184e8f 100644 --- a/include/asm-arm/arch-iop3xx/memory.h +++ b/include/asm-arm/arch-iop3xx/memory.h @@ -10,7 +10,7 @@ /* * Physical DRAM offset. */ -#ifndef CONFIG_ARCH_IOP331 +#ifndef CONFIG_ARCH_IOP33X #define PHYS_OFFSET UL(0xa0000000) #else #define PHYS_OFFSET UL(0x00000000) @@ -23,12 +23,12 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#if defined(CONFIG_ARCH_IOP321) +#if defined(CONFIG_ARCH_IOP32X) #define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0)) #define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2))) -#elif defined(CONFIG_ARCH_IOP331) +#elif defined(CONFIG_ARCH_IOP33X) #define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0)) #define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2))) diff --git a/include/asm-arm/arch-iop3xx/system.h b/include/asm-arm/arch-iop3xx/system.h index af6ae8cd36c..a16cbb77a7f 100644 --- a/include/asm-arm/arch-iop3xx/system.h +++ b/include/asm-arm/arch-iop3xx/system.h @@ -16,11 +16,11 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { -#ifdef CONFIG_ARCH_IOP321 +#ifdef CONFIG_ARCH_IOP32X *IOP321_PCSR = 0x30; #endif -#ifdef CONFIG_ARCH_IOP331 +#ifdef CONFIG_ARCH_IOP33X *IOP331_PCSR = 0x30; #endif diff --git a/include/asm-arm/arch-iop3xx/uncompress.h b/include/asm-arm/arch-iop3xx/uncompress.h index fbdd5af644f..066c16bc125 100644 --- a/include/asm-arm/arch-iop3xx/uncompress.h +++ b/include/asm-arm/arch-iop3xx/uncompress.h @@ -6,9 +6,9 @@ #include #include -#ifdef CONFIG_ARCH_IOP321 +#ifdef CONFIG_ARCH_IOP32X #define UTYPE unsigned char * -#elif defined(CONFIG_ARCH_IOP331) +#elif defined(CONFIG_ARCH_IOP33X) #define UTYPE u32 * #else #error "Missing IOP3xx arch type def" -- cgit v1.2.3 From 3f7e5815f4b774270e6506962de37af85aa9c830 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:10:26 +0100 Subject: [ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33x Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/debug-macro.S | 20 ++ include/asm-arm/arch-iop32x/dma.h | 9 + include/asm-arm/arch-iop32x/entry-macro.S | 28 +++ include/asm-arm/arch-iop32x/hardware.h | 54 +++++ include/asm-arm/arch-iop32x/io.h | 21 ++ include/asm-arm/arch-iop32x/iop321.h | 341 ++++++++++++++++++++++++++++ include/asm-arm/arch-iop32x/iq31244.h | 24 ++ include/asm-arm/arch-iop32x/iq80321.h | 24 ++ include/asm-arm/arch-iop32x/irqs.h | 98 ++++++++ include/asm-arm/arch-iop32x/memory.h | 27 +++ include/asm-arm/arch-iop32x/system.h | 29 +++ include/asm-arm/arch-iop32x/timex.h | 8 + include/asm-arm/arch-iop32x/uncompress.h | 38 ++++ include/asm-arm/arch-iop32x/vmalloc.h | 16 ++ include/asm-arm/arch-iop33x/debug-macro.S | 24 ++ include/asm-arm/arch-iop33x/dma.h | 9 + include/asm-arm/arch-iop33x/entry-macro.S | 34 +++ include/asm-arm/arch-iop33x/hardware.h | 54 +++++ include/asm-arm/arch-iop33x/io.h | 21 ++ include/asm-arm/arch-iop33x/iop331.h | 358 +++++++++++++++++++++++++++++ include/asm-arm/arch-iop33x/iq80331.h | 23 ++ include/asm-arm/arch-iop33x/iq80332.h | 23 ++ include/asm-arm/arch-iop33x/irqs.h | 130 +++++++++++ include/asm-arm/arch-iop33x/memory.h | 26 +++ include/asm-arm/arch-iop33x/system.h | 29 +++ include/asm-arm/arch-iop33x/timex.h | 8 + include/asm-arm/arch-iop33x/uncompress.h | 36 +++ include/asm-arm/arch-iop33x/vmalloc.h | 16 ++ include/asm-arm/arch-iop3xx/debug-macro.S | 35 --- include/asm-arm/arch-iop3xx/dma.h | 9 - include/asm-arm/arch-iop3xx/entry-macro.S | 57 ----- include/asm-arm/arch-iop3xx/hardware.h | 57 ----- include/asm-arm/arch-iop3xx/io.h | 21 -- include/asm-arm/arch-iop3xx/iop321-irqs.h | 100 -------- include/asm-arm/arch-iop3xx/iop321.h | 345 ---------------------------- include/asm-arm/arch-iop3xx/iop331-irqs.h | 132 ----------- include/asm-arm/arch-iop3xx/iop331.h | 363 ------------------------------ include/asm-arm/arch-iop3xx/iq31244.h | 24 -- include/asm-arm/arch-iop3xx/iq80321.h | 24 -- include/asm-arm/arch-iop3xx/iq80331.h | 23 -- include/asm-arm/arch-iop3xx/iq80332.h | 23 -- include/asm-arm/arch-iop3xx/irqs.h | 21 -- include/asm-arm/arch-iop3xx/memory.h | 38 ---- include/asm-arm/arch-iop3xx/system.h | 35 --- include/asm-arm/arch-iop3xx/timex.h | 20 -- include/asm-arm/arch-iop3xx/uncompress.h | 48 ---- include/asm-arm/arch-iop3xx/vmalloc.h | 16 -- 47 files changed, 1528 insertions(+), 1391 deletions(-) create mode 100644 include/asm-arm/arch-iop32x/debug-macro.S create mode 100644 include/asm-arm/arch-iop32x/dma.h create mode 100644 include/asm-arm/arch-iop32x/entry-macro.S create mode 100644 include/asm-arm/arch-iop32x/hardware.h create mode 100644 include/asm-arm/arch-iop32x/io.h create mode 100644 include/asm-arm/arch-iop32x/iop321.h create mode 100644 include/asm-arm/arch-iop32x/iq31244.h create mode 100644 include/asm-arm/arch-iop32x/iq80321.h create mode 100644 include/asm-arm/arch-iop32x/irqs.h create mode 100644 include/asm-arm/arch-iop32x/memory.h create mode 100644 include/asm-arm/arch-iop32x/system.h create mode 100644 include/asm-arm/arch-iop32x/timex.h create mode 100644 include/asm-arm/arch-iop32x/uncompress.h create mode 100644 include/asm-arm/arch-iop32x/vmalloc.h create mode 100644 include/asm-arm/arch-iop33x/debug-macro.S create mode 100644 include/asm-arm/arch-iop33x/dma.h create mode 100644 include/asm-arm/arch-iop33x/entry-macro.S create mode 100644 include/asm-arm/arch-iop33x/hardware.h create mode 100644 include/asm-arm/arch-iop33x/io.h create mode 100644 include/asm-arm/arch-iop33x/iop331.h create mode 100644 include/asm-arm/arch-iop33x/iq80331.h create mode 100644 include/asm-arm/arch-iop33x/iq80332.h create mode 100644 include/asm-arm/arch-iop33x/irqs.h create mode 100644 include/asm-arm/arch-iop33x/memory.h create mode 100644 include/asm-arm/arch-iop33x/system.h create mode 100644 include/asm-arm/arch-iop33x/timex.h create mode 100644 include/asm-arm/arch-iop33x/uncompress.h create mode 100644 include/asm-arm/arch-iop33x/vmalloc.h delete mode 100644 include/asm-arm/arch-iop3xx/debug-macro.S delete mode 100644 include/asm-arm/arch-iop3xx/dma.h delete mode 100644 include/asm-arm/arch-iop3xx/entry-macro.S delete mode 100644 include/asm-arm/arch-iop3xx/hardware.h delete mode 100644 include/asm-arm/arch-iop3xx/io.h delete mode 100644 include/asm-arm/arch-iop3xx/iop321-irqs.h delete mode 100644 include/asm-arm/arch-iop3xx/iop321.h delete mode 100644 include/asm-arm/arch-iop3xx/iop331-irqs.h delete mode 100644 include/asm-arm/arch-iop3xx/iop331.h delete mode 100644 include/asm-arm/arch-iop3xx/iq31244.h delete mode 100644 include/asm-arm/arch-iop3xx/iq80321.h delete mode 100644 include/asm-arm/arch-iop3xx/iq80331.h delete mode 100644 include/asm-arm/arch-iop3xx/iq80332.h delete mode 100644 include/asm-arm/arch-iop3xx/irqs.h delete mode 100644 include/asm-arm/arch-iop3xx/memory.h delete mode 100644 include/asm-arm/arch-iop3xx/system.h delete mode 100644 include/asm-arm/arch-iop3xx/timex.h delete mode 100644 include/asm-arm/arch-iop3xx/uncompress.h delete mode 100644 include/asm-arm/arch-iop3xx/vmalloc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S new file mode 100644 index 00000000000..75ab2e0d8c6 --- /dev/null +++ b/include/asm-arm/arch-iop32x/debug-macro.S @@ -0,0 +1,20 @@ +/* linux/include/asm-arm/arch-iop32x/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mov \rx, #0xfe000000 @ physical + orr \rx, \rx, #0x00800000 @ location of the UART + .endm + +#define UART_SHIFT 0 +#include diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h new file mode 100644 index 00000000000..5be36676e58 --- /dev/null +++ b/include/asm-arm/arch-iop32x/dma.h @@ -0,0 +1,9 @@ +/* + * linux/include/asm-arm/arch-iop32x/dma.h + * + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S new file mode 100644 index 00000000000..52d9435c6a3 --- /dev/null +++ b/include/asm-arm/arch-iop32x/entry-macro.S @@ -0,0 +1,28 @@ +/* + * include/asm-arm/arch-iop32x/entry-macro.S + * + * Low-level IRQ helper macros for IOP32x-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include + + .macro disable_fiq + .endm + + /* + * Note: only deal with normal interrupts, not FIQ + */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov \irqnr, #0 + mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC + cmp \irqstat, #0 + beq 1001f + clz \irqnr, \irqstat + mov \base, #31 + subs \irqnr,\base,\irqnr + add \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT +1001: + .endm diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h new file mode 100644 index 00000000000..8fb10134a10 --- /dev/null +++ b/include/asm-arm/arch-iop32x/hardware.h @@ -0,0 +1,54 @@ +/* + * linux/include/asm-arm/arch-iop32x/hardware.h + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include + +/* + * Note about PCI IO space mappings + * + * To make IO space accesses efficient, we store virtual addresses in + * the IO resources. + * + * The PCI IO space is located at virtual 0xfe000000 from physical + * 0x90000000. The PCI BARs must be programmed with physical addresses, + * but when we read them, we convert them to virtual addresses. See + * arch/arm/mach-iop3xx/iop3xx-pci.c + */ + +#define pcibios_assign_all_busses() 1 + + +/* + * The min PCI I/O and MEM space are dependent on what specific + * chipset/platform we are running on, so instead of hardcoding with + * #ifdefs, we just fill these in the platform level PCI init code. + */ +#ifndef __ASSEMBLY__ +extern unsigned long iop3xx_pcibios_min_io; +extern unsigned long iop3xx_pcibios_min_mem; + +extern unsigned int processor_id; +#endif + +/* + * We just set these to zero since they are really bogus anyways + */ +#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) +#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) + +/* + * Generic chipset bits + * + */ +#include "iop321.h" + +/* + * Board specific bits + */ +#include "iq80321.h" +#include "iq31244.h" + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h new file mode 100644 index 00000000000..36d05ada12c --- /dev/null +++ b/include/asm-arm/arch-iop32x/io.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-iop32x/io.h + * + * Copyright (C) 2001 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(p) ((void __iomem *)(p)) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h new file mode 100644 index 00000000000..7ba93faf8da --- /dev/null +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -0,0 +1,341 @@ +/* + * linux/include/asm/arch-iop32x/iop321.h + * + * Intel IOP321 Chip definitions + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IOP321_HW_H_ +#define _IOP321_HW_H_ + + +/* + * This is needed for mixed drivers that need to work on all + * IOP3xx variants but behave slightly differently on each. + */ +#ifndef __ASSEMBLY__ +#define iop_is_321() 1 +#endif + +/* + * IOP321 I/O and Mem space regions for PCI autoconfiguration + */ +#define IOP321_PCI_IO_WINDOW_SIZE 0x00010000 +#define IOP321_PCI_LOWER_IO_PA 0x90000000 +#define IOP321_PCI_LOWER_IO_VA 0xfe000000 +#define IOP321_PCI_LOWER_IO_BA (*IOP321_OIOWTVR) +#define IOP321_PCI_UPPER_IO_PA (IOP321_PCI_LOWER_IO_PA + IOP321_PCI_IO_WINDOW_SIZE - 1) +#define IOP321_PCI_UPPER_IO_VA (IOP321_PCI_LOWER_IO_VA + IOP321_PCI_IO_WINDOW_SIZE - 1) +#define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1) +#define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA) + +/* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */ +#define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ +#define IOP321_PCI_LOWER_MEM_PA 0x80000000 +#define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0) +#define IOP321_PCI_UPPER_MEM_PA (IOP321_PCI_LOWER_MEM_PA + IOP321_PCI_MEM_WINDOW_SIZE - 1) +#define IOP321_PCI_UPPER_MEM_BA (IOP321_PCI_LOWER_MEM_BA + IOP321_PCI_MEM_WINDOW_SIZE - 1) +#define IOP321_PCI_MEM_OFFSET (IOP321_PCI_LOWER_MEM_PA - IOP321_PCI_LOWER_MEM_BA) + + +/* + * IOP321 chipset registers + */ +#define IOP321_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ +#define IOP321_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */ +#define IOP321_REG_ADDR(reg) (IOP321_VIRT_MEM_BASE | (reg)) + +/* Reserved 0x00000000 through 0x000000FF */ + +/* Address Translation Unit 0x00000100 through 0x000001FF */ +#define IOP321_ATUVID (volatile u16 *)IOP321_REG_ADDR(0x00000100) +#define IOP321_ATUDID (volatile u16 *)IOP321_REG_ADDR(0x00000102) +#define IOP321_ATUCMD (volatile u16 *)IOP321_REG_ADDR(0x00000104) +#define IOP321_ATUSR (volatile u16 *)IOP321_REG_ADDR(0x00000106) +#define IOP321_ATURID (volatile u8 *)IOP321_REG_ADDR(0x00000108) +#define IOP321_ATUCCR (volatile u32 *)IOP321_REG_ADDR(0x00000109) +#define IOP321_ATUCLSR (volatile u8 *)IOP321_REG_ADDR(0x0000010C) +#define IOP321_ATULT (volatile u8 *)IOP321_REG_ADDR(0x0000010D) +#define IOP321_ATUHTR (volatile u8 *)IOP321_REG_ADDR(0x0000010E) +#define IOP321_ATUBIST (volatile u8 *)IOP321_REG_ADDR(0x0000010F) +#define IOP321_IABAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000110) +#define IOP321_IAUBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000114) +#define IOP321_IABAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000118) +#define IOP321_IAUBAR1 (volatile u32 *)IOP321_REG_ADDR(0x0000011C) +#define IOP321_IABAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000120) +#define IOP321_IAUBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000124) +#define IOP321_ASVIR (volatile u16 *)IOP321_REG_ADDR(0x0000012C) +#define IOP321_ASIR (volatile u16 *)IOP321_REG_ADDR(0x0000012E) +#define IOP321_ERBAR (volatile u32 *)IOP321_REG_ADDR(0x00000130) +/* Reserved 0x00000134 through 0x0000013B */ +#define IOP321_ATUILR (volatile u8 *)IOP321_REG_ADDR(0x0000013C) +#define IOP321_ATUIPR (volatile u8 *)IOP321_REG_ADDR(0x0000013D) +#define IOP321_ATUMGNT (volatile u8 *)IOP321_REG_ADDR(0x0000013E) +#define IOP321_ATUMLAT (volatile u8 *)IOP321_REG_ADDR(0x0000013F) +#define IOP321_IALR0 (volatile u32 *)IOP321_REG_ADDR(0x00000140) +#define IOP321_IATVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000144) +#define IOP321_ERLR (volatile u32 *)IOP321_REG_ADDR(0x00000148) +#define IOP321_ERTVR (volatile u32 *)IOP321_REG_ADDR(0x0000014C) +#define IOP321_IALR1 (volatile u32 *)IOP321_REG_ADDR(0x00000150) +#define IOP321_IALR2 (volatile u32 *)IOP321_REG_ADDR(0x00000154) +#define IOP321_IATVR2 (volatile u32 *)IOP321_REG_ADDR(0x00000158) +#define IOP321_OIOWTVR (volatile u32 *)IOP321_REG_ADDR(0x0000015C) +#define IOP321_OMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000160) +#define IOP321_OUMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000164) +#define IOP321_OMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x00000168) +#define IOP321_OUMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x0000016C) +/* Reserved 0x00000170 through 0x00000177*/ +#define IOP321_OUDWTVR (volatile u32 *)IOP321_REG_ADDR(0x00000178) +/* Reserved 0x0000017C through 0x0000017F*/ +#define IOP321_ATUCR (volatile u32 *)IOP321_REG_ADDR(0x00000180) +#define IOP321_PCSR (volatile u32 *)IOP321_REG_ADDR(0x00000184) +#define IOP321_ATUISR (volatile u32 *)IOP321_REG_ADDR(0x00000188) +#define IOP321_ATUIMR (volatile u32 *)IOP321_REG_ADDR(0x0000018C) +#define IOP321_IABAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000190) +#define IOP321_IAUBAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000194) +#define IOP321_IALR3 (volatile u32 *)IOP321_REG_ADDR(0x00000198) +#define IOP321_IATVR3 (volatile u32 *)IOP321_REG_ADDR(0x0000019C) +/* Reserved 0x000001A0 through 0x000001A3*/ +#define IOP321_OCCAR (volatile u32 *)IOP321_REG_ADDR(0x000001A4) +/* Reserved 0x000001A8 through 0x000001AB*/ +#define IOP321_OCCDR (volatile u32 *)IOP321_REG_ADDR(0x000001AC) +/* Reserved 0x000001B0 through 0x000001BB*/ +#define IOP321_PDSCR (volatile u32 *)IOP321_REG_ADDR(0x000001BC) +#define IOP321_PMCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001C0) +#define IOP321_PMNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001C1) +#define IOP321_APMCR (volatile u16 *)IOP321_REG_ADDR(0x000001C2) +#define IOP321_APMCSR (volatile u16 *)IOP321_REG_ADDR(0x000001C4) +/* Reserved 0x000001C6 through 0x000001DF */ +#define IOP321_PCIXCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001E0) +#define IOP321_PCIXNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001E1) +#define IOP321_PCIXCMD (volatile u16 *)IOP321_REG_ADDR(0x000001E2) +#define IOP321_PCIXSR (volatile u32 *)IOP321_REG_ADDR(0x000001E4) +#define IOP321_PCIIRSR (volatile u32 *)IOP321_REG_ADDR(0x000001EC) + +/* Messaging Unit 0x00000300 through 0x000003FF */ + +/* Reserved 0x00000300 through 0x0000030c */ +#define IOP321_IMR0 (volatile u32 *)IOP321_REG_ADDR(0x00000310) +#define IOP321_IMR1 (volatile u32 *)IOP321_REG_ADDR(0x00000314) +#define IOP321_OMR0 (volatile u32 *)IOP321_REG_ADDR(0x00000318) +#define IOP321_OMR1 (volatile u32 *)IOP321_REG_ADDR(0x0000031C) +#define IOP321_IDR (volatile u32 *)IOP321_REG_ADDR(0x00000320) +#define IOP321_IISR (volatile u32 *)IOP321_REG_ADDR(0x00000324) +#define IOP321_IIMR (volatile u32 *)IOP321_REG_ADDR(0x00000328) +#define IOP321_ODR (volatile u32 *)IOP321_REG_ADDR(0x0000032C) +#define IOP321_OISR (volatile u32 *)IOP321_REG_ADDR(0x00000330) +#define IOP321_OIMR (volatile u32 *)IOP321_REG_ADDR(0x00000334) +/* Reserved 0x00000338 through 0x0000034F */ +#define IOP321_MUCR (volatile u32 *)IOP321_REG_ADDR(0x00000350) +#define IOP321_QBAR (volatile u32 *)IOP321_REG_ADDR(0x00000354) +/* Reserved 0x00000358 through 0x0000035C */ +#define IOP321_IFHPR (volatile u32 *)IOP321_REG_ADDR(0x00000360) +#define IOP321_IFTPR (volatile u32 *)IOP321_REG_ADDR(0x00000364) +#define IOP321_IPHPR (volatile u32 *)IOP321_REG_ADDR(0x00000368) +#define IOP321_IPTPR (volatile u32 *)IOP321_REG_ADDR(0x0000036C) +#define IOP321_OFHPR (volatile u32 *)IOP321_REG_ADDR(0x00000370) +#define IOP321_OFTPR (volatile u32 *)IOP321_REG_ADDR(0x00000374) +#define IOP321_OPHPR (volatile u32 *)IOP321_REG_ADDR(0x00000378) +#define IOP321_OPTPR (volatile u32 *)IOP321_REG_ADDR(0x0000037C) +#define IOP321_IAR (volatile u32 *)IOP321_REG_ADDR(0x00000380) + +#define IOP321_IIxR_MASK 0x7f /* masks all */ +#define IOP321_IIxR_IRI 0x40 /* RC Index Register Interrupt */ +#define IOP321_IIxR_OFQF 0x20 /* RC Output Free Q Full (ERROR) */ +#define IOP321_IIxR_ipq 0x10 /* RC Inbound Post Q (post) */ +#define IOP321_IIxR_ERRDI 0x08 /* RO Error Doorbell Interrupt */ +#define IOP321_IIxR_IDI 0x04 /* RO Inbound Doorbell Interrupt */ +#define IOP321_IIxR_IM1 0x02 /* RC Inbound Message 1 Interrupt */ +#define IOP321_IIxR_IM0 0x01 /* RC Inbound Message 0 Interrupt */ + +/* Reserved 0x00000384 through 0x000003FF */ + +/* DMA Controller 0x00000400 through 0x000004FF */ +#define IOP321_DMA0_CCR (volatile u32 *)IOP321_REG_ADDR(0x00000400) +#define IOP321_DMA0_CSR (volatile u32 *)IOP321_REG_ADDR(0x00000404) +#define IOP321_DMA0_DAR (volatile u32 *)IOP321_REG_ADDR(0x0000040C) +#define IOP321_DMA0_NDAR (volatile u32 *)IOP321_REG_ADDR(0x00000410) +#define IOP321_DMA0_PADR (volatile u32 *)IOP321_REG_ADDR(0x00000414) +#define IOP321_DMA0_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000418) +#define IOP321_DMA0_LADR (volatile u32 *)IOP321_REG_ADDR(0X0000041C) +#define IOP321_DMA0_BCR (volatile u32 *)IOP321_REG_ADDR(0x00000420) +#define IOP321_DMA0_DCR (volatile u32 *)IOP321_REG_ADDR(0x00000424) +/* Reserved 0x00000428 through 0x0000043C */ +#define IOP321_DMA1_CCR (volatile u32 *)IOP321_REG_ADDR(0x00000440) +#define IOP321_DMA1_CSR (volatile u32 *)IOP321_REG_ADDR(0x00000444) +#define IOP321_DMA1_DAR (volatile u32 *)IOP321_REG_ADDR(0x0000044C) +#define IOP321_DMA1_NDAR (volatile u32 *)IOP321_REG_ADDR(0x00000450) +#define IOP321_DMA1_PADR (volatile u32 *)IOP321_REG_ADDR(0x00000454) +#define IOP321_DMA1_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000458) +#define IOP321_DMA1_LADR (volatile u32 *)IOP321_REG_ADDR(0x0000045C) +#define IOP321_DMA1_BCR (volatile u32 *)IOP321_REG_ADDR(0x00000460) +#define IOP321_DMA1_DCR (volatile u32 *)IOP321_REG_ADDR(0x00000464) +/* Reserved 0x00000468 through 0x000004FF */ + +/* Memory controller 0x00000500 through 0x0005FF */ + +/* Peripheral bus interface unit 0x00000680 through 0x0006FF */ +#define IOP321_PBCR (volatile u32 *)IOP321_REG_ADDR(0x00000680) +#define IOP321_PBISR (volatile u32 *)IOP321_REG_ADDR(0x00000684) +#define IOP321_PBBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000688) +#define IOP321_PBLR0 (volatile u32 *)IOP321_REG_ADDR(0x0000068C) +#define IOP321_PBBAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000690) +#define IOP321_PBLR1 (volatile u32 *)IOP321_REG_ADDR(0x00000694) +#define IOP321_PBBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000698) +#define IOP321_PBLR2 (volatile u32 *)IOP321_REG_ADDR(0x0000069C) +#define IOP321_PBBAR3 (volatile u32 *)IOP321_REG_ADDR(0x000006A0) +#define IOP321_PBLR3 (volatile u32 *)IOP321_REG_ADDR(0x000006A4) +#define IOP321_PBBAR4 (volatile u32 *)IOP321_REG_ADDR(0x000006A8) +#define IOP321_PBLR4 (volatile u32 *)IOP321_REG_ADDR(0x000006AC) +#define IOP321_PBBAR5 (volatile u32 *)IOP321_REG_ADDR(0x000006B0) +#define IOP321_PBLR5 (volatile u32 *)IOP321_REG_ADDR(0x000006B4) +#define IOP321_PBDSCR (volatile u32 *)IOP321_REG_ADDR(0x000006B8) +/* Reserved 0x000006BC */ +#define IOP321_PMBR0 (volatile u32 *)IOP321_REG_ADDR(0x000006C0) +/* Reserved 0x000006C4 through 0x000006DC */ +#define IOP321_PMBR1 (volatile u32 *)IOP321_REG_ADDR(0x000006E0) +#define IOP321_PMBR2 (volatile u32 *)IOP321_REG_ADDR(0x000006E4) + +#define IOP321_PBCR_EN 0x1 + +#define IOP321_PBISR_BOOR_ERR 0x1 + +/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ +#define IOP321_GTMR (volatile u32 *)IOP321_REG_ADDR(0x00000700) +#define IOP321_ESR (volatile u32 *)IOP321_REG_ADDR(0x00000704) +#define IOP321_EMISR (volatile u32 *)IOP321_REG_ADDR(0x00000708) +/* reserved 0x00000070c */ +#define IOP321_GTSR (volatile u32 *)IOP321_REG_ADDR(0x00000710) +/* PERC0 DOESN'T EXIST - index from 1! */ +#define IOP321_PERCR0 (volatile u32 *)IOP321_REG_ADDR(0x00000710) + +#define IOP321_GTMR_NGCE 0x04 /* (Not) Global Counter Enable */ + +/* Internal arbitration unit 0x00000780 through 0x0007BF */ +#define IOP321_IACR (volatile u32 *)IOP321_REG_ADDR(0x00000780) +#define IOP321_MTTR1 (volatile u32 *)IOP321_REG_ADDR(0x00000784) +#define IOP321_MTTR2 (volatile u32 *)IOP321_REG_ADDR(0x00000788) + +/* General Purpose I/O Registers */ +#define IOP321_GPOE (volatile u32 *)IOP321_REG_ADDR(0x000007C4) +#define IOP321_GPID (volatile u32 *)IOP321_REG_ADDR(0x000007C8) +#define IOP321_GPOD (volatile u32 *)IOP321_REG_ADDR(0x000007CC) + +/* Interrupt Controller */ +#define IOP321_INTCTL (volatile u32 *)IOP321_REG_ADDR(0x000007D0) +#define IOP321_INTSTR (volatile u32 *)IOP321_REG_ADDR(0x000007D4) +#define IOP321_IINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007D8) +#define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC) + +/* Timers */ + +#define IOP321_TU_TMR0 (volatile u32 *)IOP321_REG_ADDR(0x000007E0) +#define IOP321_TU_TMR1 (volatile u32 *)IOP321_REG_ADDR(0x000007E4) + +#ifdef CONFIG_ARCH_IQ80321 +#define IOP321_TICK_RATE 200000000 /* 200 MHz clock */ +#elif defined(CONFIG_ARCH_IQ31244) +#define IOP321_TICK_RATE 198000000 /* 33.000 MHz crystal */ +#endif + +#ifdef CONFIG_ARCH_EP80219 +#undef IOP321_TICK_RATE +#define IOP321_TICK_RATE 200000000 /* 33.333333 Mhz crystal */ +#endif + +#define IOP321_TMR_TC 0x01 +#define IOP321_TMR_EN 0x02 +#define IOP321_TMR_RELOAD 0x04 +#define IOP321_TMR_PRIVILEGED 0x09 + +#define IOP321_TMR_RATIO_1_1 0x00 +#define IOP321_TMR_RATIO_4_1 0x10 +#define IOP321_TMR_RATIO_8_1 0x20 +#define IOP321_TMR_RATIO_16_1 0x30 + +#define IOP321_TU_TCR0 (volatile u32 *)IOP321_REG_ADDR(0x000007E8) +#define IOP321_TU_TCR1 (volatile u32 *)IOP321_REG_ADDR(0x000007EC) +#define IOP321_TU_TRR0 (volatile u32 *)IOP321_REG_ADDR(0x000007F0) +#define IOP321_TU_TRR1 (volatile u32 *)IOP321_REG_ADDR(0x000007F4) +#define IOP321_TU_TISR (volatile u32 *)IOP321_REG_ADDR(0x000007F8) +#define IOP321_TU_WDTCR (volatile u32 *)IOP321_REG_ADDR(0x000007FC) + +/* Application accelerator unit 0x00000800 - 0x000008FF */ +#define IOP321_AAU_ACR (volatile u32 *)IOP321_REG_ADDR(0x00000800) +#define IOP321_AAU_ASR (volatile u32 *)IOP321_REG_ADDR(0x00000804) +#define IOP321_AAU_ADAR (volatile u32 *)IOP321_REG_ADDR(0x00000808) +#define IOP321_AAU_ANDAR (volatile u32 *)IOP321_REG_ADDR(0x0000080C) +#define IOP321_AAU_SAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000810) +#define IOP321_AAU_SAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000814) +#define IOP321_AAU_SAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000818) +#define IOP321_AAU_SAR4 (volatile u32 *)IOP321_REG_ADDR(0x0000081C) +#define IOP321_AAU_SAR5 (volatile u32 *)IOP321_REG_ADDR(0x0000082C) +#define IOP321_AAU_SAR6 (volatile u32 *)IOP321_REG_ADDR(0x00000830) +#define IOP321_AAU_SAR7 (volatile u32 *)IOP321_REG_ADDR(0x00000834) +#define IOP321_AAU_SAR8 (volatile u32 *)IOP321_REG_ADDR(0x00000838) +#define IOP321_AAU_SAR9 (volatile u32 *)IOP321_REG_ADDR(0x00000840) +#define IOP321_AAU_SAR10 (volatile u32 *)IOP321_REG_ADDR(0x00000844) +#define IOP321_AAU_SAR11 (volatile u32 *)IOP321_REG_ADDR(0x00000848) +#define IOP321_AAU_SAR12 (volatile u32 *)IOP321_REG_ADDR(0x0000084C) +#define IOP321_AAU_SAR13 (volatile u32 *)IOP321_REG_ADDR(0x00000850) +#define IOP321_AAU_SAR14 (volatile u32 *)IOP321_REG_ADDR(0x00000854) +#define IOP321_AAU_SAR15 (volatile u32 *)IOP321_REG_ADDR(0x00000858) +#define IOP321_AAU_SAR16 (volatile u32 *)IOP321_REG_ADDR(0x0000085C) +#define IOP321_AAU_SAR17 (volatile u32 *)IOP321_REG_ADDR(0x00000864) +#define IOP321_AAU_SAR18 (volatile u32 *)IOP321_REG_ADDR(0x00000868) +#define IOP321_AAU_SAR19 (volatile u32 *)IOP321_REG_ADDR(0x0000086C) +#define IOP321_AAU_SAR20 (volatile u32 *)IOP321_REG_ADDR(0x00000870) +#define IOP321_AAU_SAR21 (volatile u32 *)IOP321_REG_ADDR(0x00000874) +#define IOP321_AAU_SAR22 (volatile u32 *)IOP321_REG_ADDR(0x00000878) +#define IOP321_AAU_SAR23 (volatile u32 *)IOP321_REG_ADDR(0x0000087C) +#define IOP321_AAU_SAR24 (volatile u32 *)IOP321_REG_ADDR(0x00000880) +#define IOP321_AAU_SAR25 (volatile u32 *)IOP321_REG_ADDR(0x00000888) +#define IOP321_AAU_SAR26 (volatile u32 *)IOP321_REG_ADDR(0x0000088C) +#define IOP321_AAU_SAR27 (volatile u32 *)IOP321_REG_ADDR(0x00000890) +#define IOP321_AAU_SAR28 (volatile u32 *)IOP321_REG_ADDR(0x00000894) +#define IOP321_AAU_SAR29 (volatile u32 *)IOP321_REG_ADDR(0x00000898) +#define IOP321_AAU_SAR30 (volatile u32 *)IOP321_REG_ADDR(0x0000089C) +#define IOP321_AAU_SAR31 (volatile u32 *)IOP321_REG_ADDR(0x000008A0) +#define IOP321_AAU_SAR32 (volatile u32 *)IOP321_REG_ADDR(0x000008A4) +#define IOP321_AAU_DAR (volatile u32 *)IOP321_REG_ADDR(0x00000820) +#define IOP321_AAU_ABCR (volatile u32 *)IOP321_REG_ADDR(0x00000824) +#define IOP321_AAU_ADCR (volatile u32 *)IOP321_REG_ADDR(0x00000828) +#define IOP321_AAU_EDCR0 (volatile u32 *)IOP321_REG_ADDR(0x0000083c) +#define IOP321_AAU_EDCR1 (volatile u32 *)IOP321_REG_ADDR(0x00000860) +#define IOP321_AAU_EDCR2 (volatile u32 *)IOP321_REG_ADDR(0x00000884) + + +/* SSP serial port unit 0x00001600 - 0x0000167F */ +/* I2C bus interface unit 0x00001680 - 0x000016FF */ +#define IOP321_ICR0 (volatile u32 *)IOP321_REG_ADDR(0x00001680) +#define IOP321_ISR0 (volatile u32 *)IOP321_REG_ADDR(0x00001684) +#define IOP321_ISAR0 (volatile u32 *)IOP321_REG_ADDR(0x00001688) +#define IOP321_IDBR0 (volatile u32 *)IOP321_REG_ADDR(0x0000168C) +/* Reserved 0x00001690 */ +#define IOP321_IBMR0 (volatile u32 *)IOP321_REG_ADDR(0x00001694) +/* Reserved 0x00001698 */ +/* Reserved 0x0000169C */ +#define IOP321_ICR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A0) +#define IOP321_ISR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A4) +#define IOP321_ISAR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A8) +#define IOP321_IDBR1 (volatile u32 *)IOP321_REG_ADDR(0x000016AC) +#define IOP321_IBMR1 (volatile u32 *)IOP321_REG_ADDR(0x000016B4) +/* Reserved 0x000016B8 through 0x000016FC */ + +/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ + + +#ifndef __ASSEMBLY__ +extern void iop321_map_io(void); +extern void iop321_init_irq(void); +extern void iop321_time_init(void); +#endif + +#endif // _IOP321_HW_H_ diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h new file mode 100644 index 00000000000..f490063d215 --- /dev/null +++ b/include/asm-arm/arch-iop32x/iq31244.h @@ -0,0 +1,24 @@ +/* + * linux/include/asm/arch-iop32x/iq31244.h + * + * Intel IQ31244 evaluation board registers + */ + +#ifndef _IQ31244_H_ +#define _IQ31244_H_ + +#define IQ31244_FLASHBASE 0xf0000000 /* Flash */ +#define IQ31244_FLASHSIZE 0x00800000 +#define IQ31244_FLASHWIDTH 2 + +#define IQ31244_UART 0xfe800000 /* UART #1 */ +#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */ +#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ +#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ +#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */ + +#ifndef __ASSEMBLY__ +extern void iq31244_map_io(void); +#endif + +#endif // _IQ31244_H_ diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h new file mode 100644 index 00000000000..7015a605ab6 --- /dev/null +++ b/include/asm-arm/arch-iop32x/iq80321.h @@ -0,0 +1,24 @@ +/* + * linux/include/asm/arch-iop32x/iq80321.h + * + * Intel IQ80321 evaluation board registers + */ + +#ifndef _IQ80321_H_ +#define _IQ80321_H_ + +#define IQ80321_FLASHBASE 0xf0000000 /* Flash */ +#define IQ80321_FLASHSIZE 0x00800000 +#define IQ80321_FLASHWIDTH 1 + +#define IQ80321_UART 0xfe800000 /* UART #1 */ +#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */ +#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ +#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ +#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */ + +#ifndef __ASSEMBLY__ +extern void iq80321_map_io(void); +#endif + +#endif // _IQ80321_H_ diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h new file mode 100644 index 00000000000..4b0c82711f9 --- /dev/null +++ b/include/asm-arm/arch-iop32x/irqs.h @@ -0,0 +1,98 @@ +/* + * linux/include/asm-arm/arch-iop32x/irqs.h + * + * Author: Rory Bolt + * Copyright: (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _IRQS_H_ +#define _IRQS_H_ + +/* + * IOP80321 chipset interrupts + */ +#define IOP321_IRQ_OFS 0 +#define IOP321_IRQ(x) (IOP321_IRQ_OFS + (x)) + +/* + * On IRQ or FIQ register + */ +#define IRQ_IOP321_DMA0_EOT IOP321_IRQ(0) +#define IRQ_IOP321_DMA0_EOC IOP321_IRQ(1) +#define IRQ_IOP321_DMA1_EOT IOP321_IRQ(2) +#define IRQ_IOP321_DMA1_EOC IOP321_IRQ(3) +#define IRQ_IOP321_RSVD_4 IOP321_IRQ(4) +#define IRQ_IOP321_RSVD_5 IOP321_IRQ(5) +#define IRQ_IOP321_AA_EOT IOP321_IRQ(6) +#define IRQ_IOP321_AA_EOC IOP321_IRQ(7) +#define IRQ_IOP321_CORE_PMON IOP321_IRQ(8) +#define IRQ_IOP321_TIMER0 IOP321_IRQ(9) +#define IRQ_IOP321_TIMER1 IOP321_IRQ(10) +#define IRQ_IOP321_I2C_0 IOP321_IRQ(11) +#define IRQ_IOP321_I2C_1 IOP321_IRQ(12) +#define IRQ_IOP321_MESSAGING IOP321_IRQ(13) +#define IRQ_IOP321_ATU_BIST IOP321_IRQ(14) +#define IRQ_IOP321_PERFMON IOP321_IRQ(15) +#define IRQ_IOP321_CORE_PMU IOP321_IRQ(16) +#define IRQ_IOP321_BIU_ERR IOP321_IRQ(17) +#define IRQ_IOP321_ATU_ERR IOP321_IRQ(18) +#define IRQ_IOP321_MCU_ERR IOP321_IRQ(19) +#define IRQ_IOP321_DMA0_ERR IOP321_IRQ(20) +#define IRQ_IOP321_DMA1_ERR IOP321_IRQ(21) +#define IRQ_IOP321_RSVD_22 IOP321_IRQ(22) +#define IRQ_IOP321_AA_ERR IOP321_IRQ(23) +#define IRQ_IOP321_MSG_ERR IOP321_IRQ(24) +#define IRQ_IOP321_SSP IOP321_IRQ(25) +#define IRQ_IOP321_RSVD_26 IOP321_IRQ(26) +#define IRQ_IOP321_XINT0 IOP321_IRQ(27) +#define IRQ_IOP321_XINT1 IOP321_IRQ(28) +#define IRQ_IOP321_XINT2 IOP321_IRQ(29) +#define IRQ_IOP321_XINT3 IOP321_IRQ(30) +#define IRQ_IOP321_HPI IOP321_IRQ(31) + +#define NR_IRQS (IOP321_IRQ(31) + 1) + + +/* + * Interrupts available on the IQ80321 board + */ + +/* + * On board devices + */ +#define IRQ_IQ80321_I82544 IRQ_IOP321_XINT0 +#define IRQ_IQ80321_UART IRQ_IOP321_XINT1 + +/* + * PCI interrupts + */ +#define IRQ_IQ80321_INTA IRQ_IOP321_XINT0 +#define IRQ_IQ80321_INTB IRQ_IOP321_XINT1 +#define IRQ_IQ80321_INTC IRQ_IOP321_XINT2 +#define IRQ_IQ80321_INTD IRQ_IOP321_XINT3 + +/* + * Interrupts on the IQ31244 board + */ + +/* + * On board devices + */ +#define IRQ_IQ31244_UART IRQ_IOP321_XINT1 +#define IRQ_IQ31244_I82546 IRQ_IOP321_XINT0 +#define IRQ_IQ31244_SATA IRQ_IOP321_XINT2 +#define IRQ_IQ31244_PCIX_SLOT IRQ_IOP321_XINT3 + +/* + * PCI interrupts + */ +#define IRQ_IQ31244_INTA IRQ_IOP321_XINT0 +#define IRQ_IQ31244_INTB IRQ_IOP321_XINT1 +#define IRQ_IQ31244_INTC IRQ_IOP321_XINT2 +#define IRQ_IQ31244_INTD IRQ_IOP321_XINT3 + +#endif // _IRQ_H_ diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h new file mode 100644 index 00000000000..b4073f15b40 --- /dev/null +++ b/include/asm-arm/arch-iop32x/memory.h @@ -0,0 +1,27 @@ +/* + * linux/include/asm-arm/arch-iop32x/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#include + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0xa0000000) + +/* + * Virtual view <-> PCI DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ + +#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0)) +#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2))) + + +#endif diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h new file mode 100644 index 00000000000..d4c8d691e1b --- /dev/null +++ b/include/asm-arm/arch-iop32x/system.h @@ -0,0 +1,29 @@ +/* + * linux/include/asm-arm/arch-iop32x/system.h + * + * Copyright (C) 2001 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + + +static inline void arch_reset(char mode) +{ + *IOP321_PCSR = 0x30; + + if ( 1 && mode == 's') { + /* Jump into ROM at address 0 */ + cpu_reset(0); + } else { + /* No on-chip reset capability */ + cpu_reset(0); + } +} + diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h new file mode 100644 index 00000000000..08badde2e82 --- /dev/null +++ b/include/asm-arm/arch-iop32x/timex.h @@ -0,0 +1,8 @@ +/* + * linux/include/asm-arm/arch-iop32x/timex.h + * + * IOP3xx architecture timex specifications + */ +#include + +#define CLOCK_TICK_RATE IOP321_TICK_RATE diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h new file mode 100644 index 00000000000..4a85f20c796 --- /dev/null +++ b/include/asm-arm/arch-iop32x/uncompress.h @@ -0,0 +1,38 @@ +/* + * linux/include/asm-arm/arch-iop32x/uncompress.h + */ +#include +#include +#include +#include + +static volatile u8 *uart_base; + +#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) + +static inline void putc(char c) +{ + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + *uart_base = c; +} + +static inline void flush(void) +{ +} + +static __inline__ void __arch_decomp_setup(unsigned long arch_id) +{ + if (machine_is_iq80321()) + uart_base = (volatile u8 *)IQ80321_UART; + else if (machine_is_iq31244()) + uart_base = (volatile u8 *)IQ31244_UART; + else + uart_base = (volatile u8 *)0xfe800000; +} + +/* + * nothing to do + */ +#define arch_decomp_setup() __arch_decomp_setup(arch_id) +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h new file mode 100644 index 00000000000..8492e1708a6 --- /dev/null +++ b/include/asm-arm/arch-iop32x/vmalloc.h @@ -0,0 +1,16 @@ +/* + * linux/include/asm-arm/arch-iop32x/vmalloc.h + */ + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +//#define VMALLOC_END (0xe8000000) +/* increase usable physical RAM to ~992M per RMK */ +#define VMALLOC_END (0xfe000000) + diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S new file mode 100644 index 00000000000..b647edff475 --- /dev/null +++ b/include/asm-arm/arch-iop33x/debug-macro.S @@ -0,0 +1,24 @@ +/* linux/include/asm-arm/arch-iop33x/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ mmu enabled? + moveq \rx, #0xff000000 @ physical + movne \rx, #0xfe000000 @ virtual + orr \rx, \rx, #0x00ff0000 + orr \rx, \rx, #0x0000f700 + .endm + +#define UART_SHIFT 2 +#include diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h new file mode 100644 index 00000000000..d577ca59f4b --- /dev/null +++ b/include/asm-arm/arch-iop33x/dma.h @@ -0,0 +1,9 @@ +/* + * linux/include/asm-arm/arch-iop33x/dma.h + * + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S new file mode 100644 index 00000000000..980ec9b1ac8 --- /dev/null +++ b/include/asm-arm/arch-iop33x/entry-macro.S @@ -0,0 +1,34 @@ +/* + * include/asm-arm/arch-iop33x/entry-macro.S + * + * Low-level IRQ helper macros for IOP33x-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include + + .macro disable_fiq + .endm + + /* + * Note: only deal with normal interrupts, not FIQ + */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov \irqnr, #0 + mrc p6, 0, \irqstat, c4, c0, 0 @ Read IINTSRC0 + cmp \irqstat, #0 + bne 1002f + mrc p6, 0, \irqstat, c5, c0, 0 @ Read IINTSRC1 + cmp \irqstat, #0 + beq 1001f + clz \irqnr, \irqstat + rsbs \irqnr,\irqnr,#31 @ recommend by RMK + add \irqnr,\irqnr,#IRQ_IOP331_XINT8 + b 1001f +1002: clz \irqnr, \irqstat + rsbs \irqnr,\irqnr,#31 @ recommend by RMK + add \irqnr,\irqnr,#IRQ_IOP331_DMA0_EOT +1001: + .endm diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h new file mode 100644 index 00000000000..4a457084c5c --- /dev/null +++ b/include/asm-arm/arch-iop33x/hardware.h @@ -0,0 +1,54 @@ +/* + * linux/include/asm-arm/arch-iop33x/hardware.h + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include + +/* + * Note about PCI IO space mappings + * + * To make IO space accesses efficient, we store virtual addresses in + * the IO resources. + * + * The PCI IO space is located at virtual 0xfe000000 from physical + * 0x90000000. The PCI BARs must be programmed with physical addresses, + * but when we read them, we convert them to virtual addresses. See + * arch/arm/mach-iop33x/pci.c + */ + +#define pcibios_assign_all_busses() 1 + + +/* + * The min PCI I/O and MEM space are dependent on what specific + * chipset/platform we are running on, so instead of hardcoding with + * #ifdefs, we just fill these in the platform level PCI init code. + */ +#ifndef __ASSEMBLY__ +extern unsigned long iop3xx_pcibios_min_io; +extern unsigned long iop3xx_pcibios_min_mem; + +extern unsigned int processor_id; +#endif + +/* + * We just set these to zero since they are really bogus anyways + */ +#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) +#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) + +/* + * Generic chipset bits + * + */ +#include "iop331.h" + +/* + * Board specific bits + */ +#include "iq80331.h" +#include "iq80332.h" + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h new file mode 100644 index 00000000000..a9949d5d495 --- /dev/null +++ b/include/asm-arm/arch-iop33x/io.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-iop33x/io.h + * + * Copyright (C) 2001 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(p) ((void __iomem *)(p)) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h new file mode 100644 index 00000000000..780b707edb1 --- /dev/null +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -0,0 +1,358 @@ +/* + * linux/include/asm/arch-iop33x/iop331.h + * + * Intel IOP331 Chip definitions + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright (C) 2003, 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IOP331_HW_H_ +#define _IOP331_HW_H_ + + +/* + * This is needed for mixed drivers that need to work on all + * IOP3xx variants but behave slightly differently on each. + */ +#ifndef __ASSEMBLY__ +#define iop_is_331() 1 +#endif + +/* + * IOP331 I/O and Mem space regions for PCI autoconfiguration + */ +#define IOP331_PCI_IO_WINDOW_SIZE 0x00010000 +#define IOP331_PCI_LOWER_IO_PA 0x90000000 +#define IOP331_PCI_LOWER_IO_VA 0xfe000000 +#define IOP331_PCI_LOWER_IO_BA (*IOP331_OIOWTVR) +#define IOP331_PCI_UPPER_IO_PA (IOP331_PCI_LOWER_IO_PA + IOP331_PCI_IO_WINDOW_SIZE - 1) +#define IOP331_PCI_UPPER_IO_VA (IOP331_PCI_LOWER_IO_VA + IOP331_PCI_IO_WINDOW_SIZE - 1) +#define IOP331_PCI_UPPER_IO_BA (IOP331_PCI_LOWER_IO_BA + IOP331_PCI_IO_WINDOW_SIZE - 1) +#define IOP331_PCI_IO_OFFSET (IOP331_PCI_LOWER_IO_VA - IOP331_PCI_LOWER_IO_BA) + +/* this can be 128M if OMWTVR1 is set */ +#define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ +/* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */ +#define IOP331_PCI_LOWER_MEM_PA 0x80000000 +#define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0) +#define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1) +#define IOP331_PCI_UPPER_MEM_BA (IOP331_PCI_LOWER_MEM_BA + IOP331_PCI_MEM_WINDOW_SIZE - 1) +#define IOP331_PCI_MEM_OFFSET (IOP331_PCI_LOWER_MEM_PA - IOP331_PCI_LOWER_MEM_BA) + +/* + * IOP331 chipset registers + */ +#define IOP331_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ +#define IOP331_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */ +#define IOP331_REG_ADDR(reg) (IOP331_VIRT_MEM_BASE | (reg)) + +/* Reserved 0x00000000 through 0x000000FF */ + +/* Address Translation Unit 0x00000100 through 0x000001FF */ +#define IOP331_ATUVID (volatile u16 *)IOP331_REG_ADDR(0x00000100) +#define IOP331_ATUDID (volatile u16 *)IOP331_REG_ADDR(0x00000102) +#define IOP331_ATUCMD (volatile u16 *)IOP331_REG_ADDR(0x00000104) +#define IOP331_ATUSR (volatile u16 *)IOP331_REG_ADDR(0x00000106) +#define IOP331_ATURID (volatile u8 *)IOP331_REG_ADDR(0x00000108) +#define IOP331_ATUCCR (volatile u32 *)IOP331_REG_ADDR(0x00000109) +#define IOP331_ATUCLSR (volatile u8 *)IOP331_REG_ADDR(0x0000010C) +#define IOP331_ATULT (volatile u8 *)IOP331_REG_ADDR(0x0000010D) +#define IOP331_ATUHTR (volatile u8 *)IOP331_REG_ADDR(0x0000010E) +#define IOP331_ATUBIST (volatile u8 *)IOP331_REG_ADDR(0x0000010F) +#define IOP331_IABAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000110) +#define IOP331_IAUBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000114) +#define IOP331_IABAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000118) +#define IOP331_IAUBAR1 (volatile u32 *)IOP331_REG_ADDR(0x0000011C) +#define IOP331_IABAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000120) +#define IOP331_IAUBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000124) +#define IOP331_ASVIR (volatile u16 *)IOP331_REG_ADDR(0x0000012C) +#define IOP331_ASIR (volatile u16 *)IOP331_REG_ADDR(0x0000012E) +#define IOP331_ERBAR (volatile u32 *)IOP331_REG_ADDR(0x00000130) +#define IOP331_ATU_CAPPTR (volatile u32 *)IOP331_REG_ADDR(0x00000134) +/* Reserved 0x00000138 through 0x0000013B */ +#define IOP331_ATUILR (volatile u8 *)IOP331_REG_ADDR(0x0000013C) +#define IOP331_ATUIPR (volatile u8 *)IOP331_REG_ADDR(0x0000013D) +#define IOP331_ATUMGNT (volatile u8 *)IOP331_REG_ADDR(0x0000013E) +#define IOP331_ATUMLAT (volatile u8 *)IOP331_REG_ADDR(0x0000013F) +#define IOP331_IALR0 (volatile u32 *)IOP331_REG_ADDR(0x00000140) +#define IOP331_IATVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000144) +#define IOP331_ERLR (volatile u32 *)IOP331_REG_ADDR(0x00000148) +#define IOP331_ERTVR (volatile u32 *)IOP331_REG_ADDR(0x0000014C) +#define IOP331_IALR1 (volatile u32 *)IOP331_REG_ADDR(0x00000150) +#define IOP331_IALR2 (volatile u32 *)IOP331_REG_ADDR(0x00000154) +#define IOP331_IATVR2 (volatile u32 *)IOP331_REG_ADDR(0x00000158) +#define IOP331_OIOWTVR (volatile u32 *)IOP331_REG_ADDR(0x0000015C) +#define IOP331_OMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000160) +#define IOP331_OUMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000164) +#define IOP331_OMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x00000168) +#define IOP331_OUMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x0000016C) +/* Reserved 0x00000170 through 0x00000177*/ +#define IOP331_OUDWTVR (volatile u32 *)IOP331_REG_ADDR(0x00000178) +/* Reserved 0x0000017C through 0x0000017F*/ +#define IOP331_ATUCR (volatile u32 *)IOP331_REG_ADDR(0x00000180) +#define IOP331_PCSR (volatile u32 *)IOP331_REG_ADDR(0x00000184) +#define IOP331_ATUISR (volatile u32 *)IOP331_REG_ADDR(0x00000188) +#define IOP331_ATUIMR (volatile u32 *)IOP331_REG_ADDR(0x0000018C) +#define IOP331_IABAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000190) +#define IOP331_IAUBAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000194) +#define IOP331_IALR3 (volatile u32 *)IOP331_REG_ADDR(0x00000198) +#define IOP331_IATVR3 (volatile u32 *)IOP331_REG_ADDR(0x0000019C) +/* Reserved 0x000001A0 through 0x000001A3*/ +#define IOP331_OCCAR (volatile u32 *)IOP331_REG_ADDR(0x000001A4) +/* Reserved 0x000001A8 through 0x000001AB*/ +#define IOP331_OCCDR (volatile u32 *)IOP331_REG_ADDR(0x000001AC) +/* Reserved 0x000001B0 through 0x000001BB*/ +#define IOP331_VPDCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001B8) +#define IOP331_VPDNXTP (volatile u8 *)IOP331_REG_ADDR(0x000001B9) +#define IOP331_VPDAR (volatile u16 *)IOP331_REG_ADDR(0x000001BA) +#define IOP331_VPDDR (volatile u32 *)IOP331_REG_ADDR(0x000001BC) +#define IOP331_PMCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001C0) +#define IOP331_PMNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001C1) +#define IOP331_APMCR (volatile u16 *)IOP331_REG_ADDR(0x000001C2) +#define IOP331_APMCSR (volatile u16 *)IOP331_REG_ADDR(0x000001C4) +/* Reserved 0x000001C6 through 0x000001CF */ +#define IOP331_MSICAPID (volatile u8 *)IOP331_REG_ADDR(0x000001D0) +#define IOP331_MSINXTP (volatile u8 *)IOP331_REG_ADDR(0x000001D1) +#define IOP331_MSIMCR (volatile u16 *)IOP331_REG_ADDR(0x000001D2) +#define IOP331_MSIMAR (volatile u32 *)IOP331_REG_ADDR(0x000001D4) +#define IOP331_MSIMUAR (volatile u32 *)IOP331_REG_ADDR(0x000001D8) +#define IOP331_MSIMDR (volatile u32 *)IOP331_REG_ADDR(0x000001DC) +#define IOP331_PCIXCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001E0) +#define IOP331_PCIXNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001E1) +#define IOP331_PCIXCMD (volatile u16 *)IOP331_REG_ADDR(0x000001E2) +#define IOP331_PCIXSR (volatile u32 *)IOP331_REG_ADDR(0x000001E4) +#define IOP331_PCIIRSR (volatile u32 *)IOP331_REG_ADDR(0x000001EC) + +/* Messaging Unit 0x00000300 through 0x000003FF */ + +/* Reserved 0x00000300 through 0x0000030c */ +#define IOP331_IMR0 (volatile u32 *)IOP331_REG_ADDR(0x00000310) +#define IOP331_IMR1 (volatile u32 *)IOP331_REG_ADDR(0x00000314) +#define IOP331_OMR0 (volatile u32 *)IOP331_REG_ADDR(0x00000318) +#define IOP331_OMR1 (volatile u32 *)IOP331_REG_ADDR(0x0000031C) +#define IOP331_IDR (volatile u32 *)IOP331_REG_ADDR(0x00000320) +#define IOP331_IISR (volatile u32 *)IOP331_REG_ADDR(0x00000324) +#define IOP331_IIMR (volatile u32 *)IOP331_REG_ADDR(0x00000328) +#define IOP331_ODR (volatile u32 *)IOP331_REG_ADDR(0x0000032C) +#define IOP331_OISR (volatile u32 *)IOP331_REG_ADDR(0x00000330) +#define IOP331_OIMR (volatile u32 *)IOP331_REG_ADDR(0x00000334) +/* Reserved 0x00000338 through 0x0000034F */ +#define IOP331_MUCR (volatile u32 *)IOP331_REG_ADDR(0x00000350) +#define IOP331_QBAR (volatile u32 *)IOP331_REG_ADDR(0x00000354) +/* Reserved 0x00000358 through 0x0000035C */ +#define IOP331_IFHPR (volatile u32 *)IOP331_REG_ADDR(0x00000360) +#define IOP331_IFTPR (volatile u32 *)IOP331_REG_ADDR(0x00000364) +#define IOP331_IPHPR (volatile u32 *)IOP331_REG_ADDR(0x00000368) +#define IOP331_IPTPR (volatile u32 *)IOP331_REG_ADDR(0x0000036C) +#define IOP331_OFHPR (volatile u32 *)IOP331_REG_ADDR(0x00000370) +#define IOP331_OFTPR (volatile u32 *)IOP331_REG_ADDR(0x00000374) +#define IOP331_OPHPR (volatile u32 *)IOP331_REG_ADDR(0x00000378) +#define IOP331_OPTPR (volatile u32 *)IOP331_REG_ADDR(0x0000037C) +#define IOP331_IAR (volatile u32 *)IOP331_REG_ADDR(0x00000380) +/* Reserved 0x00000384 through 0x000003FF */ + +/* DMA Controller 0x00000400 through 0x000004FF */ +#define IOP331_DMA0_CCR (volatile u32 *)IOP331_REG_ADDR(0x00000400) +#define IOP331_DMA0_CSR (volatile u32 *)IOP331_REG_ADDR(0x00000404) +#define IOP331_DMA0_DAR (volatile u32 *)IOP331_REG_ADDR(0x0000040C) +#define IOP331_DMA0_NDAR (volatile u32 *)IOP331_REG_ADDR(0x00000410) +#define IOP331_DMA0_PADR (volatile u32 *)IOP331_REG_ADDR(0x00000414) +#define IOP331_DMA0_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000418) +#define IOP331_DMA0_LADR (volatile u32 *)IOP331_REG_ADDR(0X0000041C) +#define IOP331_DMA0_BCR (volatile u32 *)IOP331_REG_ADDR(0x00000420) +#define IOP331_DMA0_DCR (volatile u32 *)IOP331_REG_ADDR(0x00000424) +/* Reserved 0x00000428 through 0x0000043C */ +#define IOP331_DMA1_CCR (volatile u32 *)IOP331_REG_ADDR(0x00000440) +#define IOP331_DMA1_CSR (volatile u32 *)IOP331_REG_ADDR(0x00000444) +#define IOP331_DMA1_DAR (volatile u32 *)IOP331_REG_ADDR(0x0000044C) +#define IOP331_DMA1_NDAR (volatile u32 *)IOP331_REG_ADDR(0x00000450) +#define IOP331_DMA1_PADR (volatile u32 *)IOP331_REG_ADDR(0x00000454) +#define IOP331_DMA1_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000458) +#define IOP331_DMA1_LADR (volatile u32 *)IOP331_REG_ADDR(0x0000045C) +#define IOP331_DMA1_BCR (volatile u32 *)IOP331_REG_ADDR(0x00000460) +#define IOP331_DMA1_DCR (volatile u32 *)IOP331_REG_ADDR(0x00000464) +/* Reserved 0x00000468 through 0x000004FF */ + +/* Memory controller 0x00000500 through 0x0005FF */ + +/* Peripheral bus interface unit 0x00000680 through 0x0006FF */ +#define IOP331_PBCR (volatile u32 *)IOP331_REG_ADDR(0x00000680) +#define IOP331_PBISR (volatile u32 *)IOP331_REG_ADDR(0x00000684) +#define IOP331_PBBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000688) +#define IOP331_PBLR0 (volatile u32 *)IOP331_REG_ADDR(0x0000068C) +#define IOP331_PBBAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000690) +#define IOP331_PBLR1 (volatile u32 *)IOP331_REG_ADDR(0x00000694) +#define IOP331_PBBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000698) +#define IOP331_PBLR2 (volatile u32 *)IOP331_REG_ADDR(0x0000069C) +#define IOP331_PBBAR3 (volatile u32 *)IOP331_REG_ADDR(0x000006A0) +#define IOP331_PBLR3 (volatile u32 *)IOP331_REG_ADDR(0x000006A4) +#define IOP331_PBBAR4 (volatile u32 *)IOP331_REG_ADDR(0x000006A8) +#define IOP331_PBLR4 (volatile u32 *)IOP331_REG_ADDR(0x000006AC) +#define IOP331_PBBAR5 (volatile u32 *)IOP331_REG_ADDR(0x000006B0) +#define IOP331_PBLR5 (volatile u32 *)IOP331_REG_ADDR(0x000006B4) +#define IOP331_PBDSCR (volatile u32 *)IOP331_REG_ADDR(0x000006B8) +/* Reserved 0x000006BC */ +#define IOP331_PMBR0 (volatile u32 *)IOP331_REG_ADDR(0x000006C0) +/* Reserved 0x000006C4 through 0x000006DC */ +#define IOP331_PMBR1 (volatile u32 *)IOP331_REG_ADDR(0x000006E0) +#define IOP331_PMBR2 (volatile u32 *)IOP331_REG_ADDR(0x000006E4) + +#define IOP331_PBCR_EN 0x1 + +#define IOP331_PBISR_BOOR_ERR 0x1 + + + +/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ +/* Internal arbitration unit 0x00000780 through 0x0007BF */ + +/* Interrupt Controller */ +#define IOP331_INTCTL0 (volatile u32 *)IOP331_REG_ADDR(0x00000790) +#define IOP331_INTCTL1 (volatile u32 *)IOP331_REG_ADDR(0x00000794) +#define IOP331_INTSTR0 (volatile u32 *)IOP331_REG_ADDR(0x00000798) +#define IOP331_INTSTR1 (volatile u32 *)IOP331_REG_ADDR(0x0000079C) +#define IOP331_IINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A0) +#define IOP331_IINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007A4) +#define IOP331_FINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A8) +#define IOP331_FINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007AC) +#define IOP331_IPR0 (volatile u32 *)IOP331_REG_ADDR(0x000007B0) +#define IOP331_IPR1 (volatile u32 *)IOP331_REG_ADDR(0x000007B4) +#define IOP331_IPR2 (volatile u32 *)IOP331_REG_ADDR(0x000007B8) +#define IOP331_IPR3 (volatile u32 *)IOP331_REG_ADDR(0x000007BC) +#define IOP331_INTBASE (volatile u32 *)IOP331_REG_ADDR(0x000007C0) +#define IOP331_INTSIZE (volatile u32 *)IOP331_REG_ADDR(0x000007C4) +#define IOP331_IINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007C8) +#define IOP331_FINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007CC) + + +/* Timers */ + +#define IOP331_TU_TMR0 (volatile u32 *)IOP331_REG_ADDR(0x000007D0) +#define IOP331_TU_TMR1 (volatile u32 *)IOP331_REG_ADDR(0x000007D4) + +#define IOP331_TMR_TC 0x01 +#define IOP331_TMR_EN 0x02 +#define IOP331_TMR_RELOAD 0x04 +#define IOP331_TMR_PRIVILEGED 0x09 + +#define IOP331_TMR_RATIO_1_1 0x00 +#define IOP331_TMR_RATIO_4_1 0x10 +#define IOP331_TMR_RATIO_8_1 0x20 +#define IOP331_TMR_RATIO_16_1 0x30 + +#define IOP331_TU_TCR0 (volatile u32 *)IOP331_REG_ADDR(0x000007D8) +#define IOP331_TU_TCR1 (volatile u32 *)IOP331_REG_ADDR(0x000007DC) +#define IOP331_TU_TRR0 (volatile u32 *)IOP331_REG_ADDR(0x000007E0) +#define IOP331_TU_TRR1 (volatile u32 *)IOP331_REG_ADDR(0x000007E4) +#define IOP331_TU_TISR (volatile u32 *)IOP331_REG_ADDR(0x000007E8) +#define IOP331_TU_WDTCR (volatile u32 *)IOP331_REG_ADDR(0x000007EC) + +#if defined(CONFIG_ARCH_IOP33X) +#define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */ +#endif + +#if defined(CONFIG_IOP331_STEPD) || defined(CONFIG_ARCH_IQ80333) +#undef IOP331_TICK_RATE +#define IOP331_TICK_RATE 333000000 /* 333 Mhz IB clock */ +#endif + +/* Application accelerator unit 0x00000800 - 0x000008FF */ +#define IOP331_AAU_ACR (volatile u32 *)IOP331_REG_ADDR(0x00000800) +#define IOP331_AAU_ASR (volatile u32 *)IOP331_REG_ADDR(0x00000804) +#define IOP331_AAU_ADAR (volatile u32 *)IOP331_REG_ADDR(0x00000808) +#define IOP331_AAU_ANDAR (volatile u32 *)IOP331_REG_ADDR(0x0000080C) +#define IOP331_AAU_SAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000810) +#define IOP331_AAU_SAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000814) +#define IOP331_AAU_SAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000818) +#define IOP331_AAU_SAR4 (volatile u32 *)IOP331_REG_ADDR(0x0000081C) +#define IOP331_AAU_SAR5 (volatile u32 *)IOP331_REG_ADDR(0x0000082C) +#define IOP331_AAU_SAR6 (volatile u32 *)IOP331_REG_ADDR(0x00000830) +#define IOP331_AAU_SAR7 (volatile u32 *)IOP331_REG_ADDR(0x00000834) +#define IOP331_AAU_SAR8 (volatile u32 *)IOP331_REG_ADDR(0x00000838) +#define IOP331_AAU_SAR9 (volatile u32 *)IOP331_REG_ADDR(0x00000840) +#define IOP331_AAU_SAR10 (volatile u32 *)IOP331_REG_ADDR(0x00000844) +#define IOP331_AAU_SAR11 (volatile u32 *)IOP331_REG_ADDR(0x00000848) +#define IOP331_AAU_SAR12 (volatile u32 *)IOP331_REG_ADDR(0x0000084C) +#define IOP331_AAU_SAR13 (volatile u32 *)IOP331_REG_ADDR(0x00000850) +#define IOP331_AAU_SAR14 (volatile u32 *)IOP331_REG_ADDR(0x00000854) +#define IOP331_AAU_SAR15 (volatile u32 *)IOP331_REG_ADDR(0x00000858) +#define IOP331_AAU_SAR16 (volatile u32 *)IOP331_REG_ADDR(0x0000085C) +#define IOP331_AAU_SAR17 (volatile u32 *)IOP331_REG_ADDR(0x00000864) +#define IOP331_AAU_SAR18 (volatile u32 *)IOP331_REG_ADDR(0x00000868) +#define IOP331_AAU_SAR19 (volatile u32 *)IOP331_REG_ADDR(0x0000086C) +#define IOP331_AAU_SAR20 (volatile u32 *)IOP331_REG_ADDR(0x00000870) +#define IOP331_AAU_SAR21 (volatile u32 *)IOP331_REG_ADDR(0x00000874) +#define IOP331_AAU_SAR22 (volatile u32 *)IOP331_REG_ADDR(0x00000878) +#define IOP331_AAU_SAR23 (volatile u32 *)IOP331_REG_ADDR(0x0000087C) +#define IOP331_AAU_SAR24 (volatile u32 *)IOP331_REG_ADDR(0x00000880) +#define IOP331_AAU_SAR25 (volatile u32 *)IOP331_REG_ADDR(0x00000888) +#define IOP331_AAU_SAR26 (volatile u32 *)IOP331_REG_ADDR(0x0000088C) +#define IOP331_AAU_SAR27 (volatile u32 *)IOP331_REG_ADDR(0x00000890) +#define IOP331_AAU_SAR28 (volatile u32 *)IOP331_REG_ADDR(0x00000894) +#define IOP331_AAU_SAR29 (volatile u32 *)IOP331_REG_ADDR(0x00000898) +#define IOP331_AAU_SAR30 (volatile u32 *)IOP331_REG_ADDR(0x0000089C) +#define IOP331_AAU_SAR31 (volatile u32 *)IOP331_REG_ADDR(0x000008A0) +#define IOP331_AAU_SAR32 (volatile u32 *)IOP331_REG_ADDR(0x000008A4) +#define IOP331_AAU_DAR (volatile u32 *)IOP331_REG_ADDR(0x00000820) +#define IOP331_AAU_ABCR (volatile u32 *)IOP331_REG_ADDR(0x00000824) +#define IOP331_AAU_ADCR (volatile u32 *)IOP331_REG_ADDR(0x00000828) +#define IOP331_AAU_EDCR0 (volatile u32 *)IOP331_REG_ADDR(0x0000083c) +#define IOP331_AAU_EDCR1 (volatile u32 *)IOP331_REG_ADDR(0x00000860) +#define IOP331_AAU_EDCR2 (volatile u32 *)IOP331_REG_ADDR(0x00000884) + + +#define IOP331_SPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C0) +#define IOP331_PPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C8) +/* SSP serial port unit 0x00001600 - 0x0000167F */ + +/* I2C bus interface unit 0x00001680 - 0x000016FF */ +/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ + +#define IOP331_ICR0 (volatile u32 *)IOP331_REG_ADDR(0x00001680) +#define IOP331_ISR0 (volatile u32 *)IOP331_REG_ADDR(0x00001684) +#define IOP331_ISAR0 (volatile u32 *)IOP331_REG_ADDR(0x00001688) +#define IOP331_IDBR0 (volatile u32 *)IOP331_REG_ADDR(0x0000168C) +/* Reserved 0x00001690 */ +#define IOP331_IBMR0 (volatile u32 *)IOP331_REG_ADDR(0x00001694) +/* Reserved 0x00001698 */ +/* Reserved 0x0000169C */ +#define IOP331_ICR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A0) +#define IOP331_ISR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A4) +#define IOP331_ISAR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A8) +#define IOP331_IDBR1 (volatile u32 *)IOP331_REG_ADDR(0x000016AC) +#define IOP331_IBMR1 (volatile u32 *)IOP331_REG_ADDR(0x000016B4) +/* Reserved 0x000016B8 through 0x000016FF */ + +/* 0x00001700 through 0x0000172C UART 0 */ + +/* Reserved 0x00001730 through 0x0000173F */ + +/* 0x00001740 through 0x0000176C UART 1 */ + +#define IOP331_UART0_PHYS (IOP331_PHYS_MEM_BASE | 0x00001700) /* UART #1 physical */ +#define IOP331_UART1_PHYS (IOP331_PHYS_MEM_BASE | 0x00001740) /* UART #2 physical */ +#define IOP331_UART0_VIRT (IOP331_VIRT_MEM_BASE | 0x00001700) /* UART #1 virtual addr */ +#define IOP331_UART1_VIRT (IOP331_VIRT_MEM_BASE | 0x00001740) /* UART #2 virtual addr */ + +/* Reserved 0x00001770 through 0x0000177F */ + +/* General Purpose I/O Registers */ +#define IOP331_GPOE (volatile u32 *)IOP331_REG_ADDR(0x00001780) +#define IOP331_GPID (volatile u32 *)IOP331_REG_ADDR(0x00001784) +#define IOP331_GPOD (volatile u32 *)IOP331_REG_ADDR(0x00001788) + +/* Reserved 0x0000178c through 0x000019ff */ + + +#ifndef __ASSEMBLY__ +extern void iop331_map_io(void); +extern void iop331_init_irq(void); +extern void iop331_time_init(void); +#endif + +#endif // _IOP331_HW_H_ diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h new file mode 100644 index 00000000000..bda7ab6d55c --- /dev/null +++ b/include/asm-arm/arch-iop33x/iq80331.h @@ -0,0 +1,23 @@ +/* + * linux/include/asm/arch-iop33x/iq80331.h + * + * Intel IQ80331 evaluation board registers + */ + +#ifndef _IQ80331_H_ +#define _IQ80331_H_ + +#define IQ80331_FLASHBASE 0xc0000000 /* Flash */ +#define IQ80331_FLASHSIZE 0x00800000 +#define IQ80331_FLASHWIDTH 1 + +#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */ +#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ +#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */ +#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */ + +#ifndef __ASSEMBLY__ +extern void iq80331_map_io(void); +#endif + +#endif // _IQ80331_H_ diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h new file mode 100644 index 00000000000..f728e04378a --- /dev/null +++ b/include/asm-arm/arch-iop33x/iq80332.h @@ -0,0 +1,23 @@ +/* + * linux/include/asm/arch-iop33x/iq80332.h + * + * Intel IQ80332 evaluation board registers + */ + +#ifndef _IQ80332_H_ +#define _IQ80332_H_ + +#define IQ80332_FLASHBASE 0xc0000000 /* Flash */ +#define IQ80332_FLASHSIZE 0x00800000 +#define IQ80332_FLASHWIDTH 1 + +#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */ +#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ +#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */ +#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */ + +#ifndef __ASSEMBLY__ +extern void iq80332_map_io(void); +#endif + +#endif // _IQ80332_H_ diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h new file mode 100644 index 00000000000..45856a12815 --- /dev/null +++ b/include/asm-arm/arch-iop33x/irqs.h @@ -0,0 +1,130 @@ +/* + * linux/include/asm-arm/arch-iop33x/irqs.h + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright: (C) 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _IRQS_H_ +#define _IRQS_H_ + +/* + * IOP80331 chipset interrupts + */ +#define IOP331_IRQ_OFS 0 +#define IOP331_IRQ(x) (IOP331_IRQ_OFS + (x)) + +/* + * On IRQ or FIQ register + */ +#define IRQ_IOP331_DMA0_EOT IOP331_IRQ(0) +#define IRQ_IOP331_DMA0_EOC IOP331_IRQ(1) +#define IRQ_IOP331_DMA1_EOT IOP331_IRQ(2) +#define IRQ_IOP331_DMA1_EOC IOP331_IRQ(3) +#define IRQ_IOP331_RSVD_4 IOP331_IRQ(4) +#define IRQ_IOP331_RSVD_5 IOP331_IRQ(5) +#define IRQ_IOP331_AA_EOT IOP331_IRQ(6) +#define IRQ_IOP331_AA_EOC IOP331_IRQ(7) +#define IRQ_IOP331_TIMER0 IOP331_IRQ(8) +#define IRQ_IOP331_TIMER1 IOP331_IRQ(9) +#define IRQ_IOP331_I2C_0 IOP331_IRQ(10) +#define IRQ_IOP331_I2C_1 IOP331_IRQ(11) +#define IRQ_IOP331_MSG IOP331_IRQ(12) +#define IRQ_IOP331_MSGIBQ IOP331_IRQ(13) +#define IRQ_IOP331_ATU_BIST IOP331_IRQ(14) +#define IRQ_IOP331_PERFMON IOP331_IRQ(15) +#define IRQ_IOP331_CORE_PMU IOP331_IRQ(16) +#define IRQ_IOP331_RSVD_17 IOP331_IRQ(17) +#define IRQ_IOP331_RSVD_18 IOP331_IRQ(18) +#define IRQ_IOP331_RSVD_19 IOP331_IRQ(19) +#define IRQ_IOP331_RSVD_20 IOP331_IRQ(20) +#define IRQ_IOP331_RSVD_21 IOP331_IRQ(21) +#define IRQ_IOP331_RSVD_22 IOP331_IRQ(22) +#define IRQ_IOP331_RSVD_23 IOP331_IRQ(23) +#define IRQ_IOP331_XINT0 IOP331_IRQ(24) +#define IRQ_IOP331_XINT1 IOP331_IRQ(25) +#define IRQ_IOP331_XINT2 IOP331_IRQ(26) +#define IRQ_IOP331_XINT3 IOP331_IRQ(27) +#define IRQ_IOP331_RSVD_28 IOP331_IRQ(28) +#define IRQ_IOP331_RSVD_29 IOP331_IRQ(29) +#define IRQ_IOP331_RSVD_30 IOP331_IRQ(30) +#define IRQ_IOP331_RSVD_31 IOP331_IRQ(31) +#define IRQ_IOP331_XINT8 IOP331_IRQ(32) // 0 +#define IRQ_IOP331_XINT9 IOP331_IRQ(33) // 1 +#define IRQ_IOP331_XINT10 IOP331_IRQ(34) // 2 +#define IRQ_IOP331_XINT11 IOP331_IRQ(35) // 3 +#define IRQ_IOP331_XINT12 IOP331_IRQ(36) // 4 +#define IRQ_IOP331_XINT13 IOP331_IRQ(37) // 5 +#define IRQ_IOP331_XINT14 IOP331_IRQ(38) // 6 +#define IRQ_IOP331_XINT15 IOP331_IRQ(39) // 7 +#define IRQ_IOP331_RSVD_40 IOP331_IRQ(40) // 8 +#define IRQ_IOP331_RSVD_41 IOP331_IRQ(41) // 9 +#define IRQ_IOP331_RSVD_42 IOP331_IRQ(42) // 10 +#define IRQ_IOP331_RSVD_43 IOP331_IRQ(43) // 11 +#define IRQ_IOP331_RSVD_44 IOP331_IRQ(44) // 12 +#define IRQ_IOP331_RSVD_45 IOP331_IRQ(45) // 13 +#define IRQ_IOP331_RSVD_46 IOP331_IRQ(46) // 14 +#define IRQ_IOP331_RSVD_47 IOP331_IRQ(47) // 15 +#define IRQ_IOP331_RSVD_48 IOP331_IRQ(48) // 16 +#define IRQ_IOP331_RSVD_49 IOP331_IRQ(49) // 17 +#define IRQ_IOP331_RSVD_50 IOP331_IRQ(50) // 18 +#define IRQ_IOP331_UART0 IOP331_IRQ(51) // 19 +#define IRQ_IOP331_UART1 IOP331_IRQ(52) // 20 +#define IRQ_IOP331_PBIE IOP331_IRQ(53) // 21 +#define IRQ_IOP331_ATU_CRW IOP331_IRQ(54) // 22 +#define IRQ_IOP331_ATU_ERR IOP331_IRQ(55) // 23 +#define IRQ_IOP331_MCU_ERR IOP331_IRQ(56) // 24 +#define IRQ_IOP331_DMA0_ERR IOP331_IRQ(57) // 25 +#define IRQ_IOP331_DMA1_ERR IOP331_IRQ(58) // 26 +#define IRQ_IOP331_RSVD_59 IOP331_IRQ(59) // 27 +#define IRQ_IOP331_AA_ERR IOP331_IRQ(60) // 28 +#define IRQ_IOP331_RSVD_61 IOP331_IRQ(61) // 29 +#define IRQ_IOP331_MSG_ERR IOP331_IRQ(62) // 30 +#define IRQ_IOP331_HPI IOP331_IRQ(63) // 31 + +#define NR_IRQS (IOP331_IRQ(63) + 1) + + +/* + * Interrupts available on the IQ80331 board + */ + +/* + * On board devices + */ +#define IRQ_IQ80331_I82544 IRQ_IOP331_XINT0 +#define IRQ_IQ80331_UART0 IRQ_IOP331_UART0 +#define IRQ_IQ80331_UART1 IRQ_IOP331_UART1 + +/* + * PCI interrupts + */ +#define IRQ_IQ80331_INTA IRQ_IOP331_XINT0 +#define IRQ_IQ80331_INTB IRQ_IOP331_XINT1 +#define IRQ_IQ80331_INTC IRQ_IOP331_XINT2 +#define IRQ_IQ80331_INTD IRQ_IOP331_XINT3 + +/* + * Interrupts available on the IQ80332 board + */ + +/* + * On board devices + */ +#define IRQ_IQ80332_I82544 IRQ_IOP331_XINT0 +#define IRQ_IQ80332_UART0 IRQ_IOP331_UART0 +#define IRQ_IQ80332_UART1 IRQ_IOP331_UART1 + +/* + * PCI interrupts + */ +#define IRQ_IQ80332_INTA IRQ_IOP331_XINT0 +#define IRQ_IQ80332_INTB IRQ_IOP331_XINT1 +#define IRQ_IQ80332_INTC IRQ_IOP331_XINT2 +#define IRQ_IQ80332_INTD IRQ_IOP331_XINT3 + +#endif // _IRQ_H_ diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h new file mode 100644 index 00000000000..5e47164934c --- /dev/null +++ b/include/asm-arm/arch-iop33x/memory.h @@ -0,0 +1,26 @@ +/* + * linux/include/asm-arm/arch-iop33x/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#include + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) + +/* + * Virtual view <-> PCI DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0)) +#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2))) + + +#endif diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h new file mode 100644 index 00000000000..43cc787ea62 --- /dev/null +++ b/include/asm-arm/arch-iop33x/system.h @@ -0,0 +1,29 @@ +/* + * linux/include/asm-arm/arch-iop33x/system.h + * + * Copyright (C) 2001 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + + +static inline void arch_reset(char mode) +{ + *IOP331_PCSR = 0x30; + + if ( 1 && mode == 's') { + /* Jump into ROM at address 0 */ + cpu_reset(0); + } else { + /* No on-chip reset capability */ + cpu_reset(0); + } +} + diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h new file mode 100644 index 00000000000..cc8085fa2a1 --- /dev/null +++ b/include/asm-arm/arch-iop33x/timex.h @@ -0,0 +1,8 @@ +/* + * linux/include/asm-arm/arch-iop33x/timex.h + * + * IOP3xx architecture timex specifications + */ +#include + +#define CLOCK_TICK_RATE IOP331_TICK_RATE diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h new file mode 100644 index 00000000000..62904ae3b03 --- /dev/null +++ b/include/asm-arm/arch-iop33x/uncompress.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/arch-iop33x/uncompress.h + */ +#include +#include +#include +#include + +static volatile u32 *uart_base; + +#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) + +static inline void putc(char c) +{ + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + *uart_base = c; +} + +static inline void flush(void) +{ +} + +static __inline__ void __arch_decomp_setup(unsigned long arch_id) +{ + if (machine_is_iq80331() || machine_is_iq80332()) + uart_base = (volatile u32 *)IOP331_UART0_PHYS; + else + uart_base = (volatile u32 *)0xfe800000; +} + +/* + * nothing to do + */ +#define arch_decomp_setup() __arch_decomp_setup(arch_id) +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h new file mode 100644 index 00000000000..b5092027449 --- /dev/null +++ b/include/asm-arm/arch-iop33x/vmalloc.h @@ -0,0 +1,16 @@ +/* + * linux/include/asm-arm/arch-iop33x/vmalloc.h + */ + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +//#define VMALLOC_END (0xe8000000) +/* increase usable physical RAM to ~992M per RMK */ +#define VMALLOC_END (0xfe000000) + diff --git a/include/asm-arm/arch-iop3xx/debug-macro.S b/include/asm-arm/arch-iop3xx/debug-macro.S deleted file mode 100644 index dcc6856d14f..00000000000 --- a/include/asm-arm/arch-iop3xx/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/include/asm-arm/arch-iop3xx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mov \rx, #0xfe000000 @ physical -#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244) - orr \rx, \rx, #0x00800000 @ location of the UART -#elif defined(CONFIG_ARCH_IOP33X) - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x000fe000 @ Physical Base - movne \rx, #0 - orr \rx, \rx, #0xfe000000 - orr \rx, \rx, #0x00f00000 @ Virtual Base - orr \rx, \rx, #0x00001700 @ location of the UART -#else -#error Unknown IOP3XX implementation -#endif - .endm - -#if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331) -#define FLOW_CONTROL -#endif -#define UART_SHIFT 0 -#include diff --git a/include/asm-arm/arch-iop3xx/dma.h b/include/asm-arm/arch-iop3xx/dma.h deleted file mode 100644 index 1e808db8af2..00000000000 --- a/include/asm-arm/arch-iop3xx/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/dma.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-iop3xx/entry-macro.S b/include/asm-arm/arch-iop3xx/entry-macro.S deleted file mode 100644 index f3db54637ad..00000000000 --- a/include/asm-arm/arch-iop3xx/entry-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-iop3xx/entry-macro.S - * - * Low-level IRQ helper macros for IOP3xx-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - -#if defined(CONFIG_ARCH_IOP32X) - .macro disable_fiq - .endm - - /* - * Note: only deal with normal interrupts, not FIQ - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 - mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC - cmp \irqstat, #0 - beq 1001f - clz \irqnr, \irqstat - mov \base, #31 - subs \irqnr,\base,\irqnr - add \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT -1001: - .endm - -#elif defined(CONFIG_ARCH_IOP33X) - .macro disable_fiq - .endm - - /* - * Note: only deal with normal interrupts, not FIQ - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 - mrc p6, 0, \irqstat, c4, c0, 0 @ Read IINTSRC0 - cmp \irqstat, #0 - bne 1002f - mrc p6, 0, \irqstat, c5, c0, 0 @ Read IINTSRC1 - cmp \irqstat, #0 - beq 1001f - clz \irqnr, \irqstat - rsbs \irqnr,\irqnr,#31 @ recommend by RMK - add \irqnr,\irqnr,#IRQ_IOP331_XINT8 - b 1001f -1002: clz \irqnr, \irqstat - rsbs \irqnr,\irqnr,#31 @ recommend by RMK - add \irqnr,\irqnr,#IRQ_IOP331_DMA0_EOT -1001: - .endm - -#endif - diff --git a/include/asm-arm/arch-iop3xx/hardware.h b/include/asm-arm/arch-iop3xx/hardware.h deleted file mode 100644 index 3b138171d08..00000000000 --- a/include/asm-arm/arch-iop3xx/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/hardware.h - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* - * Note about PCI IO space mappings - * - * To make IO space accesses efficient, we store virtual addresses in - * the IO resources. - * - * The PCI IO space is located at virtual 0xfe000000 from physical - * 0x90000000. The PCI BARs must be programmed with physical addresses, - * but when we read them, we convert them to virtual addresses. See - * arch/arm/mach-iop3xx/iop3xx-pci.c - */ - -#define pcibios_assign_all_busses() 1 - - -/* - * The min PCI I/O and MEM space are dependent on what specific - * chipset/platform we are running on, so instead of hardcoding with - * #ifdefs, we just fill these in the platform level PCI init code. - */ -#ifndef __ASSEMBLY__ -extern unsigned long iop3xx_pcibios_min_io; -extern unsigned long iop3xx_pcibios_min_mem; - -extern unsigned int processor_id; -#endif - -/* - * We just set these to zero since they are really bogus anyways - */ -#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) - -/* - * Generic chipset bits - * - */ -#include "iop321.h" -#include "iop331.h" - -/* - * Board specific bits - */ -#include "iq80321.h" -#include "iq31244.h" -#include "iq80331.h" -#include "iq80332.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h deleted file mode 100644 index 36adbdf5055..00000000000 --- a/include/asm-arm/arch-iop3xx/io.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) ((void __iomem *)(p)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-iop3xx/iop321-irqs.h b/include/asm-arm/arch-iop3xx/iop321-irqs.h deleted file mode 100644 index 2fcc1654cb9..00000000000 --- a/include/asm-arm/arch-iop3xx/iop321-irqs.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/irqs.h - * - * Author: Rory Bolt - * Copyright: (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _IOP321_IRQS_H_ -#define _IOP321_IRQS_H_ - -/* - * IOP80321 chipset interrupts - */ -#define IOP321_IRQ_OFS 0 -#define IOP321_IRQ(x) (IOP321_IRQ_OFS + (x)) - -/* - * On IRQ or FIQ register - */ -#define IRQ_IOP321_DMA0_EOT IOP321_IRQ(0) -#define IRQ_IOP321_DMA0_EOC IOP321_IRQ(1) -#define IRQ_IOP321_DMA1_EOT IOP321_IRQ(2) -#define IRQ_IOP321_DMA1_EOC IOP321_IRQ(3) -#define IRQ_IOP321_RSVD_4 IOP321_IRQ(4) -#define IRQ_IOP321_RSVD_5 IOP321_IRQ(5) -#define IRQ_IOP321_AA_EOT IOP321_IRQ(6) -#define IRQ_IOP321_AA_EOC IOP321_IRQ(7) -#define IRQ_IOP321_CORE_PMON IOP321_IRQ(8) -#define IRQ_IOP321_TIMER0 IOP321_IRQ(9) -#define IRQ_IOP321_TIMER1 IOP321_IRQ(10) -#define IRQ_IOP321_I2C_0 IOP321_IRQ(11) -#define IRQ_IOP321_I2C_1 IOP321_IRQ(12) -#define IRQ_IOP321_MESSAGING IOP321_IRQ(13) -#define IRQ_IOP321_ATU_BIST IOP321_IRQ(14) -#define IRQ_IOP321_PERFMON IOP321_IRQ(15) -#define IRQ_IOP321_CORE_PMU IOP321_IRQ(16) -#define IRQ_IOP321_BIU_ERR IOP321_IRQ(17) -#define IRQ_IOP321_ATU_ERR IOP321_IRQ(18) -#define IRQ_IOP321_MCU_ERR IOP321_IRQ(19) -#define IRQ_IOP321_DMA0_ERR IOP321_IRQ(20) -#define IRQ_IOP321_DMA1_ERR IOP321_IRQ(21) -#define IRQ_IOP321_RSVD_22 IOP321_IRQ(22) -#define IRQ_IOP321_AA_ERR IOP321_IRQ(23) -#define IRQ_IOP321_MSG_ERR IOP321_IRQ(24) -#define IRQ_IOP321_SSP IOP321_IRQ(25) -#define IRQ_IOP321_RSVD_26 IOP321_IRQ(26) -#define IRQ_IOP321_XINT0 IOP321_IRQ(27) -#define IRQ_IOP321_XINT1 IOP321_IRQ(28) -#define IRQ_IOP321_XINT2 IOP321_IRQ(29) -#define IRQ_IOP321_XINT3 IOP321_IRQ(30) -#define IRQ_IOP321_HPI IOP321_IRQ(31) - -#define NR_IOP321_IRQS (IOP321_IRQ(31) + 1) - -#define NR_IRQS NR_IOP321_IRQS - - -/* - * Interrupts available on the IQ80321 board - */ - -/* - * On board devices - */ -#define IRQ_IQ80321_I82544 IRQ_IOP321_XINT0 -#define IRQ_IQ80321_UART IRQ_IOP321_XINT1 - -/* - * PCI interrupts - */ -#define IRQ_IQ80321_INTA IRQ_IOP321_XINT0 -#define IRQ_IQ80321_INTB IRQ_IOP321_XINT1 -#define IRQ_IQ80321_INTC IRQ_IOP321_XINT2 -#define IRQ_IQ80321_INTD IRQ_IOP321_XINT3 - -/* - * Interrupts on the IQ31244 board - */ - -/* - * On board devices - */ -#define IRQ_IQ31244_UART IRQ_IOP321_XINT1 -#define IRQ_IQ31244_I82546 IRQ_IOP321_XINT0 -#define IRQ_IQ31244_SATA IRQ_IOP321_XINT2 -#define IRQ_IQ31244_PCIX_SLOT IRQ_IOP321_XINT3 - -/* - * PCI interrupts - */ -#define IRQ_IQ31244_INTA IRQ_IOP321_XINT0 -#define IRQ_IQ31244_INTB IRQ_IOP321_XINT1 -#define IRQ_IQ31244_INTC IRQ_IOP321_XINT2 -#define IRQ_IQ31244_INTD IRQ_IOP321_XINT3 - -#endif // _IOP321_IRQ_H_ diff --git a/include/asm-arm/arch-iop3xx/iop321.h b/include/asm-arm/arch-iop3xx/iop321.h deleted file mode 100644 index d198d72a50a..00000000000 --- a/include/asm-arm/arch-iop3xx/iop321.h +++ /dev/null @@ -1,345 +0,0 @@ -/* - * linux/include/asm/arch-iop3xx/iop321.h - * - * Intel IOP321 Chip definitions - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IOP321_HW_H_ -#define _IOP321_HW_H_ - - -/* - * This is needed for mixed drivers that need to work on all - * IOP3xx variants but behave slightly differently on each. - */ -#ifndef __ASSEMBLY__ -#ifdef CONFIG_ARCH_IOP32X -#define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420)) -#else -#define iop_is_321() 0 -#endif -#endif - -/* - * IOP321 I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP321_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP321_PCI_LOWER_IO_PA 0x90000000 -#define IOP321_PCI_LOWER_IO_VA 0xfe000000 -#define IOP321_PCI_LOWER_IO_BA (*IOP321_OIOWTVR) -#define IOP321_PCI_UPPER_IO_PA (IOP321_PCI_LOWER_IO_PA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_IO_VA (IOP321_PCI_LOWER_IO_VA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA) - -/* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */ -#define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -#define IOP321_PCI_LOWER_MEM_PA 0x80000000 -#define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0) -#define IOP321_PCI_UPPER_MEM_PA (IOP321_PCI_LOWER_MEM_PA + IOP321_PCI_MEM_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_MEM_BA (IOP321_PCI_LOWER_MEM_BA + IOP321_PCI_MEM_WINDOW_SIZE - 1) -#define IOP321_PCI_MEM_OFFSET (IOP321_PCI_LOWER_MEM_PA - IOP321_PCI_LOWER_MEM_BA) - - -/* - * IOP321 chipset registers - */ -#define IOP321_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ -#define IOP321_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */ -#define IOP321_REG_ADDR(reg) (IOP321_VIRT_MEM_BASE | (reg)) - -/* Reserved 0x00000000 through 0x000000FF */ - -/* Address Translation Unit 0x00000100 through 0x000001FF */ -#define IOP321_ATUVID (volatile u16 *)IOP321_REG_ADDR(0x00000100) -#define IOP321_ATUDID (volatile u16 *)IOP321_REG_ADDR(0x00000102) -#define IOP321_ATUCMD (volatile u16 *)IOP321_REG_ADDR(0x00000104) -#define IOP321_ATUSR (volatile u16 *)IOP321_REG_ADDR(0x00000106) -#define IOP321_ATURID (volatile u8 *)IOP321_REG_ADDR(0x00000108) -#define IOP321_ATUCCR (volatile u32 *)IOP321_REG_ADDR(0x00000109) -#define IOP321_ATUCLSR (volatile u8 *)IOP321_REG_ADDR(0x0000010C) -#define IOP321_ATULT (volatile u8 *)IOP321_REG_ADDR(0x0000010D) -#define IOP321_ATUHTR (volatile u8 *)IOP321_REG_ADDR(0x0000010E) -#define IOP321_ATUBIST (volatile u8 *)IOP321_REG_ADDR(0x0000010F) -#define IOP321_IABAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000110) -#define IOP321_IAUBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000114) -#define IOP321_IABAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000118) -#define IOP321_IAUBAR1 (volatile u32 *)IOP321_REG_ADDR(0x0000011C) -#define IOP321_IABAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000120) -#define IOP321_IAUBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000124) -#define IOP321_ASVIR (volatile u16 *)IOP321_REG_ADDR(0x0000012C) -#define IOP321_ASIR (volatile u16 *)IOP321_REG_ADDR(0x0000012E) -#define IOP321_ERBAR (volatile u32 *)IOP321_REG_ADDR(0x00000130) -/* Reserved 0x00000134 through 0x0000013B */ -#define IOP321_ATUILR (volatile u8 *)IOP321_REG_ADDR(0x0000013C) -#define IOP321_ATUIPR (volatile u8 *)IOP321_REG_ADDR(0x0000013D) -#define IOP321_ATUMGNT (volatile u8 *)IOP321_REG_ADDR(0x0000013E) -#define IOP321_ATUMLAT (volatile u8 *)IOP321_REG_ADDR(0x0000013F) -#define IOP321_IALR0 (volatile u32 *)IOP321_REG_ADDR(0x00000140) -#define IOP321_IATVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000144) -#define IOP321_ERLR (volatile u32 *)IOP321_REG_ADDR(0x00000148) -#define IOP321_ERTVR (volatile u32 *)IOP321_REG_ADDR(0x0000014C) -#define IOP321_IALR1 (volatile u32 *)IOP321_REG_ADDR(0x00000150) -#define IOP321_IALR2 (volatile u32 *)IOP321_REG_ADDR(0x00000154) -#define IOP321_IATVR2 (volatile u32 *)IOP321_REG_ADDR(0x00000158) -#define IOP321_OIOWTVR (volatile u32 *)IOP321_REG_ADDR(0x0000015C) -#define IOP321_OMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000160) -#define IOP321_OUMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000164) -#define IOP321_OMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x00000168) -#define IOP321_OUMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x0000016C) -/* Reserved 0x00000170 through 0x00000177*/ -#define IOP321_OUDWTVR (volatile u32 *)IOP321_REG_ADDR(0x00000178) -/* Reserved 0x0000017C through 0x0000017F*/ -#define IOP321_ATUCR (volatile u32 *)IOP321_REG_ADDR(0x00000180) -#define IOP321_PCSR (volatile u32 *)IOP321_REG_ADDR(0x00000184) -#define IOP321_ATUISR (volatile u32 *)IOP321_REG_ADDR(0x00000188) -#define IOP321_ATUIMR (volatile u32 *)IOP321_REG_ADDR(0x0000018C) -#define IOP321_IABAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000190) -#define IOP321_IAUBAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000194) -#define IOP321_IALR3 (volatile u32 *)IOP321_REG_ADDR(0x00000198) -#define IOP321_IATVR3 (volatile u32 *)IOP321_REG_ADDR(0x0000019C) -/* Reserved 0x000001A0 through 0x000001A3*/ -#define IOP321_OCCAR (volatile u32 *)IOP321_REG_ADDR(0x000001A4) -/* Reserved 0x000001A8 through 0x000001AB*/ -#define IOP321_OCCDR (volatile u32 *)IOP321_REG_ADDR(0x000001AC) -/* Reserved 0x000001B0 through 0x000001BB*/ -#define IOP321_PDSCR (volatile u32 *)IOP321_REG_ADDR(0x000001BC) -#define IOP321_PMCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001C0) -#define IOP321_PMNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001C1) -#define IOP321_APMCR (volatile u16 *)IOP321_REG_ADDR(0x000001C2) -#define IOP321_APMCSR (volatile u16 *)IOP321_REG_ADDR(0x000001C4) -/* Reserved 0x000001C6 through 0x000001DF */ -#define IOP321_PCIXCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001E0) -#define IOP321_PCIXNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001E1) -#define IOP321_PCIXCMD (volatile u16 *)IOP321_REG_ADDR(0x000001E2) -#define IOP321_PCIXSR (volatile u32 *)IOP321_REG_ADDR(0x000001E4) -#define IOP321_PCIIRSR (volatile u32 *)IOP321_REG_ADDR(0x000001EC) - -/* Messaging Unit 0x00000300 through 0x000003FF */ - -/* Reserved 0x00000300 through 0x0000030c */ -#define IOP321_IMR0 (volatile u32 *)IOP321_REG_ADDR(0x00000310) -#define IOP321_IMR1 (volatile u32 *)IOP321_REG_ADDR(0x00000314) -#define IOP321_OMR0 (volatile u32 *)IOP321_REG_ADDR(0x00000318) -#define IOP321_OMR1 (volatile u32 *)IOP321_REG_ADDR(0x0000031C) -#define IOP321_IDR (volatile u32 *)IOP321_REG_ADDR(0x00000320) -#define IOP321_IISR (volatile u32 *)IOP321_REG_ADDR(0x00000324) -#define IOP321_IIMR (volatile u32 *)IOP321_REG_ADDR(0x00000328) -#define IOP321_ODR (volatile u32 *)IOP321_REG_ADDR(0x0000032C) -#define IOP321_OISR (volatile u32 *)IOP321_REG_ADDR(0x00000330) -#define IOP321_OIMR (volatile u32 *)IOP321_REG_ADDR(0x00000334) -/* Reserved 0x00000338 through 0x0000034F */ -#define IOP321_MUCR (volatile u32 *)IOP321_REG_ADDR(0x00000350) -#define IOP321_QBAR (volatile u32 *)IOP321_REG_ADDR(0x00000354) -/* Reserved 0x00000358 through 0x0000035C */ -#define IOP321_IFHPR (volatile u32 *)IOP321_REG_ADDR(0x00000360) -#define IOP321_IFTPR (volatile u32 *)IOP321_REG_ADDR(0x00000364) -#define IOP321_IPHPR (volatile u32 *)IOP321_REG_ADDR(0x00000368) -#define IOP321_IPTPR (volatile u32 *)IOP321_REG_ADDR(0x0000036C) -#define IOP321_OFHPR (volatile u32 *)IOP321_REG_ADDR(0x00000370) -#define IOP321_OFTPR (volatile u32 *)IOP321_REG_ADDR(0x00000374) -#define IOP321_OPHPR (volatile u32 *)IOP321_REG_ADDR(0x00000378) -#define IOP321_OPTPR (volatile u32 *)IOP321_REG_ADDR(0x0000037C) -#define IOP321_IAR (volatile u32 *)IOP321_REG_ADDR(0x00000380) - -#define IOP321_IIxR_MASK 0x7f /* masks all */ -#define IOP321_IIxR_IRI 0x40 /* RC Index Register Interrupt */ -#define IOP321_IIxR_OFQF 0x20 /* RC Output Free Q Full (ERROR) */ -#define IOP321_IIxR_ipq 0x10 /* RC Inbound Post Q (post) */ -#define IOP321_IIxR_ERRDI 0x08 /* RO Error Doorbell Interrupt */ -#define IOP321_IIxR_IDI 0x04 /* RO Inbound Doorbell Interrupt */ -#define IOP321_IIxR_IM1 0x02 /* RC Inbound Message 1 Interrupt */ -#define IOP321_IIxR_IM0 0x01 /* RC Inbound Message 0 Interrupt */ - -/* Reserved 0x00000384 through 0x000003FF */ - -/* DMA Controller 0x00000400 through 0x000004FF */ -#define IOP321_DMA0_CCR (volatile u32 *)IOP321_REG_ADDR(0x00000400) -#define IOP321_DMA0_CSR (volatile u32 *)IOP321_REG_ADDR(0x00000404) -#define IOP321_DMA0_DAR (volatile u32 *)IOP321_REG_ADDR(0x0000040C) -#define IOP321_DMA0_NDAR (volatile u32 *)IOP321_REG_ADDR(0x00000410) -#define IOP321_DMA0_PADR (volatile u32 *)IOP321_REG_ADDR(0x00000414) -#define IOP321_DMA0_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000418) -#define IOP321_DMA0_LADR (volatile u32 *)IOP321_REG_ADDR(0X0000041C) -#define IOP321_DMA0_BCR (volatile u32 *)IOP321_REG_ADDR(0x00000420) -#define IOP321_DMA0_DCR (volatile u32 *)IOP321_REG_ADDR(0x00000424) -/* Reserved 0x00000428 through 0x0000043C */ -#define IOP321_DMA1_CCR (volatile u32 *)IOP321_REG_ADDR(0x00000440) -#define IOP321_DMA1_CSR (volatile u32 *)IOP321_REG_ADDR(0x00000444) -#define IOP321_DMA1_DAR (volatile u32 *)IOP321_REG_ADDR(0x0000044C) -#define IOP321_DMA1_NDAR (volatile u32 *)IOP321_REG_ADDR(0x00000450) -#define IOP321_DMA1_PADR (volatile u32 *)IOP321_REG_ADDR(0x00000454) -#define IOP321_DMA1_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000458) -#define IOP321_DMA1_LADR (volatile u32 *)IOP321_REG_ADDR(0x0000045C) -#define IOP321_DMA1_BCR (volatile u32 *)IOP321_REG_ADDR(0x00000460) -#define IOP321_DMA1_DCR (volatile u32 *)IOP321_REG_ADDR(0x00000464) -/* Reserved 0x00000468 through 0x000004FF */ - -/* Memory controller 0x00000500 through 0x0005FF */ - -/* Peripheral bus interface unit 0x00000680 through 0x0006FF */ -#define IOP321_PBCR (volatile u32 *)IOP321_REG_ADDR(0x00000680) -#define IOP321_PBISR (volatile u32 *)IOP321_REG_ADDR(0x00000684) -#define IOP321_PBBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000688) -#define IOP321_PBLR0 (volatile u32 *)IOP321_REG_ADDR(0x0000068C) -#define IOP321_PBBAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000690) -#define IOP321_PBLR1 (volatile u32 *)IOP321_REG_ADDR(0x00000694) -#define IOP321_PBBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000698) -#define IOP321_PBLR2 (volatile u32 *)IOP321_REG_ADDR(0x0000069C) -#define IOP321_PBBAR3 (volatile u32 *)IOP321_REG_ADDR(0x000006A0) -#define IOP321_PBLR3 (volatile u32 *)IOP321_REG_ADDR(0x000006A4) -#define IOP321_PBBAR4 (volatile u32 *)IOP321_REG_ADDR(0x000006A8) -#define IOP321_PBLR4 (volatile u32 *)IOP321_REG_ADDR(0x000006AC) -#define IOP321_PBBAR5 (volatile u32 *)IOP321_REG_ADDR(0x000006B0) -#define IOP321_PBLR5 (volatile u32 *)IOP321_REG_ADDR(0x000006B4) -#define IOP321_PBDSCR (volatile u32 *)IOP321_REG_ADDR(0x000006B8) -/* Reserved 0x000006BC */ -#define IOP321_PMBR0 (volatile u32 *)IOP321_REG_ADDR(0x000006C0) -/* Reserved 0x000006C4 through 0x000006DC */ -#define IOP321_PMBR1 (volatile u32 *)IOP321_REG_ADDR(0x000006E0) -#define IOP321_PMBR2 (volatile u32 *)IOP321_REG_ADDR(0x000006E4) - -#define IOP321_PBCR_EN 0x1 - -#define IOP321_PBISR_BOOR_ERR 0x1 - -/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ -#define IOP321_GTMR (volatile u32 *)IOP321_REG_ADDR(0x00000700) -#define IOP321_ESR (volatile u32 *)IOP321_REG_ADDR(0x00000704) -#define IOP321_EMISR (volatile u32 *)IOP321_REG_ADDR(0x00000708) -/* reserved 0x00000070c */ -#define IOP321_GTSR (volatile u32 *)IOP321_REG_ADDR(0x00000710) -/* PERC0 DOESN'T EXIST - index from 1! */ -#define IOP321_PERCR0 (volatile u32 *)IOP321_REG_ADDR(0x00000710) - -#define IOP321_GTMR_NGCE 0x04 /* (Not) Global Counter Enable */ - -/* Internal arbitration unit 0x00000780 through 0x0007BF */ -#define IOP321_IACR (volatile u32 *)IOP321_REG_ADDR(0x00000780) -#define IOP321_MTTR1 (volatile u32 *)IOP321_REG_ADDR(0x00000784) -#define IOP321_MTTR2 (volatile u32 *)IOP321_REG_ADDR(0x00000788) - -/* General Purpose I/O Registers */ -#define IOP321_GPOE (volatile u32 *)IOP321_REG_ADDR(0x000007C4) -#define IOP321_GPID (volatile u32 *)IOP321_REG_ADDR(0x000007C8) -#define IOP321_GPOD (volatile u32 *)IOP321_REG_ADDR(0x000007CC) - -/* Interrupt Controller */ -#define IOP321_INTCTL (volatile u32 *)IOP321_REG_ADDR(0x000007D0) -#define IOP321_INTSTR (volatile u32 *)IOP321_REG_ADDR(0x000007D4) -#define IOP321_IINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007D8) -#define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC) - -/* Timers */ - -#define IOP321_TU_TMR0 (volatile u32 *)IOP321_REG_ADDR(0x000007E0) -#define IOP321_TU_TMR1 (volatile u32 *)IOP321_REG_ADDR(0x000007E4) - -#ifdef CONFIG_ARCH_IQ80321 -#define IOP321_TICK_RATE 200000000 /* 200 MHz clock */ -#elif defined(CONFIG_ARCH_IQ31244) -#define IOP321_TICK_RATE 198000000 /* 33.000 MHz crystal */ -#endif - -#ifdef CONFIG_ARCH_EP80219 -#undef IOP321_TICK_RATE -#define IOP321_TICK_RATE 200000000 /* 33.333333 Mhz crystal */ -#endif - -#define IOP321_TMR_TC 0x01 -#define IOP321_TMR_EN 0x02 -#define IOP321_TMR_RELOAD 0x04 -#define IOP321_TMR_PRIVILEGED 0x09 - -#define IOP321_TMR_RATIO_1_1 0x00 -#define IOP321_TMR_RATIO_4_1 0x10 -#define IOP321_TMR_RATIO_8_1 0x20 -#define IOP321_TMR_RATIO_16_1 0x30 - -#define IOP321_TU_TCR0 (volatile u32 *)IOP321_REG_ADDR(0x000007E8) -#define IOP321_TU_TCR1 (volatile u32 *)IOP321_REG_ADDR(0x000007EC) -#define IOP321_TU_TRR0 (volatile u32 *)IOP321_REG_ADDR(0x000007F0) -#define IOP321_TU_TRR1 (volatile u32 *)IOP321_REG_ADDR(0x000007F4) -#define IOP321_TU_TISR (volatile u32 *)IOP321_REG_ADDR(0x000007F8) -#define IOP321_TU_WDTCR (volatile u32 *)IOP321_REG_ADDR(0x000007FC) - -/* Application accelerator unit 0x00000800 - 0x000008FF */ -#define IOP321_AAU_ACR (volatile u32 *)IOP321_REG_ADDR(0x00000800) -#define IOP321_AAU_ASR (volatile u32 *)IOP321_REG_ADDR(0x00000804) -#define IOP321_AAU_ADAR (volatile u32 *)IOP321_REG_ADDR(0x00000808) -#define IOP321_AAU_ANDAR (volatile u32 *)IOP321_REG_ADDR(0x0000080C) -#define IOP321_AAU_SAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000810) -#define IOP321_AAU_SAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000814) -#define IOP321_AAU_SAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000818) -#define IOP321_AAU_SAR4 (volatile u32 *)IOP321_REG_ADDR(0x0000081C) -#define IOP321_AAU_SAR5 (volatile u32 *)IOP321_REG_ADDR(0x0000082C) -#define IOP321_AAU_SAR6 (volatile u32 *)IOP321_REG_ADDR(0x00000830) -#define IOP321_AAU_SAR7 (volatile u32 *)IOP321_REG_ADDR(0x00000834) -#define IOP321_AAU_SAR8 (volatile u32 *)IOP321_REG_ADDR(0x00000838) -#define IOP321_AAU_SAR9 (volatile u32 *)IOP321_REG_ADDR(0x00000840) -#define IOP321_AAU_SAR10 (volatile u32 *)IOP321_REG_ADDR(0x00000844) -#define IOP321_AAU_SAR11 (volatile u32 *)IOP321_REG_ADDR(0x00000848) -#define IOP321_AAU_SAR12 (volatile u32 *)IOP321_REG_ADDR(0x0000084C) -#define IOP321_AAU_SAR13 (volatile u32 *)IOP321_REG_ADDR(0x00000850) -#define IOP321_AAU_SAR14 (volatile u32 *)IOP321_REG_ADDR(0x00000854) -#define IOP321_AAU_SAR15 (volatile u32 *)IOP321_REG_ADDR(0x00000858) -#define IOP321_AAU_SAR16 (volatile u32 *)IOP321_REG_ADDR(0x0000085C) -#define IOP321_AAU_SAR17 (volatile u32 *)IOP321_REG_ADDR(0x00000864) -#define IOP321_AAU_SAR18 (volatile u32 *)IOP321_REG_ADDR(0x00000868) -#define IOP321_AAU_SAR19 (volatile u32 *)IOP321_REG_ADDR(0x0000086C) -#define IOP321_AAU_SAR20 (volatile u32 *)IOP321_REG_ADDR(0x00000870) -#define IOP321_AAU_SAR21 (volatile u32 *)IOP321_REG_ADDR(0x00000874) -#define IOP321_AAU_SAR22 (volatile u32 *)IOP321_REG_ADDR(0x00000878) -#define IOP321_AAU_SAR23 (volatile u32 *)IOP321_REG_ADDR(0x0000087C) -#define IOP321_AAU_SAR24 (volatile u32 *)IOP321_REG_ADDR(0x00000880) -#define IOP321_AAU_SAR25 (volatile u32 *)IOP321_REG_ADDR(0x00000888) -#define IOP321_AAU_SAR26 (volatile u32 *)IOP321_REG_ADDR(0x0000088C) -#define IOP321_AAU_SAR27 (volatile u32 *)IOP321_REG_ADDR(0x00000890) -#define IOP321_AAU_SAR28 (volatile u32 *)IOP321_REG_ADDR(0x00000894) -#define IOP321_AAU_SAR29 (volatile u32 *)IOP321_REG_ADDR(0x00000898) -#define IOP321_AAU_SAR30 (volatile u32 *)IOP321_REG_ADDR(0x0000089C) -#define IOP321_AAU_SAR31 (volatile u32 *)IOP321_REG_ADDR(0x000008A0) -#define IOP321_AAU_SAR32 (volatile u32 *)IOP321_REG_ADDR(0x000008A4) -#define IOP321_AAU_DAR (volatile u32 *)IOP321_REG_ADDR(0x00000820) -#define IOP321_AAU_ABCR (volatile u32 *)IOP321_REG_ADDR(0x00000824) -#define IOP321_AAU_ADCR (volatile u32 *)IOP321_REG_ADDR(0x00000828) -#define IOP321_AAU_EDCR0 (volatile u32 *)IOP321_REG_ADDR(0x0000083c) -#define IOP321_AAU_EDCR1 (volatile u32 *)IOP321_REG_ADDR(0x00000860) -#define IOP321_AAU_EDCR2 (volatile u32 *)IOP321_REG_ADDR(0x00000884) - - -/* SSP serial port unit 0x00001600 - 0x0000167F */ -/* I2C bus interface unit 0x00001680 - 0x000016FF */ -#define IOP321_ICR0 (volatile u32 *)IOP321_REG_ADDR(0x00001680) -#define IOP321_ISR0 (volatile u32 *)IOP321_REG_ADDR(0x00001684) -#define IOP321_ISAR0 (volatile u32 *)IOP321_REG_ADDR(0x00001688) -#define IOP321_IDBR0 (volatile u32 *)IOP321_REG_ADDR(0x0000168C) -/* Reserved 0x00001690 */ -#define IOP321_IBMR0 (volatile u32 *)IOP321_REG_ADDR(0x00001694) -/* Reserved 0x00001698 */ -/* Reserved 0x0000169C */ -#define IOP321_ICR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A0) -#define IOP321_ISR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A4) -#define IOP321_ISAR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A8) -#define IOP321_IDBR1 (volatile u32 *)IOP321_REG_ADDR(0x000016AC) -#define IOP321_IBMR1 (volatile u32 *)IOP321_REG_ADDR(0x000016B4) -/* Reserved 0x000016B8 through 0x000016FC */ - -/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ - - -#ifndef __ASSEMBLY__ -extern void iop321_map_io(void); -extern void iop321_init_irq(void); -extern void iop321_time_init(void); -#endif - -#endif // _IOP321_HW_H_ diff --git a/include/asm-arm/arch-iop3xx/iop331-irqs.h b/include/asm-arm/arch-iop3xx/iop331-irqs.h deleted file mode 100644 index 7135ad7e335..00000000000 --- a/include/asm-arm/arch-iop3xx/iop331-irqs.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/irqs.h - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright: (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _IOP331_IRQS_H_ -#define _IOP331_IRQS_H_ - -/* - * IOP80331 chipset interrupts - */ -#define IOP331_IRQ_OFS 0 -#define IOP331_IRQ(x) (IOP331_IRQ_OFS + (x)) - -/* - * On IRQ or FIQ register - */ -#define IRQ_IOP331_DMA0_EOT IOP331_IRQ(0) -#define IRQ_IOP331_DMA0_EOC IOP331_IRQ(1) -#define IRQ_IOP331_DMA1_EOT IOP331_IRQ(2) -#define IRQ_IOP331_DMA1_EOC IOP331_IRQ(3) -#define IRQ_IOP331_RSVD_4 IOP331_IRQ(4) -#define IRQ_IOP331_RSVD_5 IOP331_IRQ(5) -#define IRQ_IOP331_AA_EOT IOP331_IRQ(6) -#define IRQ_IOP331_AA_EOC IOP331_IRQ(7) -#define IRQ_IOP331_TIMER0 IOP331_IRQ(8) -#define IRQ_IOP331_TIMER1 IOP331_IRQ(9) -#define IRQ_IOP331_I2C_0 IOP331_IRQ(10) -#define IRQ_IOP331_I2C_1 IOP331_IRQ(11) -#define IRQ_IOP331_MSG IOP331_IRQ(12) -#define IRQ_IOP331_MSGIBQ IOP331_IRQ(13) -#define IRQ_IOP331_ATU_BIST IOP331_IRQ(14) -#define IRQ_IOP331_PERFMON IOP331_IRQ(15) -#define IRQ_IOP331_CORE_PMU IOP331_IRQ(16) -#define IRQ_IOP331_RSVD_17 IOP331_IRQ(17) -#define IRQ_IOP331_RSVD_18 IOP331_IRQ(18) -#define IRQ_IOP331_RSVD_19 IOP331_IRQ(19) -#define IRQ_IOP331_RSVD_20 IOP331_IRQ(20) -#define IRQ_IOP331_RSVD_21 IOP331_IRQ(21) -#define IRQ_IOP331_RSVD_22 IOP331_IRQ(22) -#define IRQ_IOP331_RSVD_23 IOP331_IRQ(23) -#define IRQ_IOP331_XINT0 IOP331_IRQ(24) -#define IRQ_IOP331_XINT1 IOP331_IRQ(25) -#define IRQ_IOP331_XINT2 IOP331_IRQ(26) -#define IRQ_IOP331_XINT3 IOP331_IRQ(27) -#define IRQ_IOP331_RSVD_28 IOP331_IRQ(28) -#define IRQ_IOP331_RSVD_29 IOP331_IRQ(29) -#define IRQ_IOP331_RSVD_30 IOP331_IRQ(30) -#define IRQ_IOP331_RSVD_31 IOP331_IRQ(31) -#define IRQ_IOP331_XINT8 IOP331_IRQ(32) // 0 -#define IRQ_IOP331_XINT9 IOP331_IRQ(33) // 1 -#define IRQ_IOP331_XINT10 IOP331_IRQ(34) // 2 -#define IRQ_IOP331_XINT11 IOP331_IRQ(35) // 3 -#define IRQ_IOP331_XINT12 IOP331_IRQ(36) // 4 -#define IRQ_IOP331_XINT13 IOP331_IRQ(37) // 5 -#define IRQ_IOP331_XINT14 IOP331_IRQ(38) // 6 -#define IRQ_IOP331_XINT15 IOP331_IRQ(39) // 7 -#define IRQ_IOP331_RSVD_40 IOP331_IRQ(40) // 8 -#define IRQ_IOP331_RSVD_41 IOP331_IRQ(41) // 9 -#define IRQ_IOP331_RSVD_42 IOP331_IRQ(42) // 10 -#define IRQ_IOP331_RSVD_43 IOP331_IRQ(43) // 11 -#define IRQ_IOP331_RSVD_44 IOP331_IRQ(44) // 12 -#define IRQ_IOP331_RSVD_45 IOP331_IRQ(45) // 13 -#define IRQ_IOP331_RSVD_46 IOP331_IRQ(46) // 14 -#define IRQ_IOP331_RSVD_47 IOP331_IRQ(47) // 15 -#define IRQ_IOP331_RSVD_48 IOP331_IRQ(48) // 16 -#define IRQ_IOP331_RSVD_49 IOP331_IRQ(49) // 17 -#define IRQ_IOP331_RSVD_50 IOP331_IRQ(50) // 18 -#define IRQ_IOP331_UART0 IOP331_IRQ(51) // 19 -#define IRQ_IOP331_UART1 IOP331_IRQ(52) // 20 -#define IRQ_IOP331_PBIE IOP331_IRQ(53) // 21 -#define IRQ_IOP331_ATU_CRW IOP331_IRQ(54) // 22 -#define IRQ_IOP331_ATU_ERR IOP331_IRQ(55) // 23 -#define IRQ_IOP331_MCU_ERR IOP331_IRQ(56) // 24 -#define IRQ_IOP331_DMA0_ERR IOP331_IRQ(57) // 25 -#define IRQ_IOP331_DMA1_ERR IOP331_IRQ(58) // 26 -#define IRQ_IOP331_RSVD_59 IOP331_IRQ(59) // 27 -#define IRQ_IOP331_AA_ERR IOP331_IRQ(60) // 28 -#define IRQ_IOP331_RSVD_61 IOP331_IRQ(61) // 29 -#define IRQ_IOP331_MSG_ERR IOP331_IRQ(62) // 30 -#define IRQ_IOP331_HPI IOP331_IRQ(63) // 31 - -#define NR_IOP331_IRQS (IOP331_IRQ(63) + 1) - -#define NR_IRQS NR_IOP331_IRQS - - -/* - * Interrupts available on the IQ80331 board - */ - -/* - * On board devices - */ -#define IRQ_IQ80331_I82544 IRQ_IOP331_XINT0 -#define IRQ_IQ80331_UART0 IRQ_IOP331_UART0 -#define IRQ_IQ80331_UART1 IRQ_IOP331_UART1 - -/* - * PCI interrupts - */ -#define IRQ_IQ80331_INTA IRQ_IOP331_XINT0 -#define IRQ_IQ80331_INTB IRQ_IOP331_XINT1 -#define IRQ_IQ80331_INTC IRQ_IOP331_XINT2 -#define IRQ_IQ80331_INTD IRQ_IOP331_XINT3 - -/* - * Interrupts available on the IQ80332 board - */ - -/* - * On board devices - */ -#define IRQ_IQ80332_I82544 IRQ_IOP331_XINT0 -#define IRQ_IQ80332_UART0 IRQ_IOP331_UART0 -#define IRQ_IQ80332_UART1 IRQ_IOP331_UART1 - -/* - * PCI interrupts - */ -#define IRQ_IQ80332_INTA IRQ_IOP331_XINT0 -#define IRQ_IQ80332_INTB IRQ_IOP331_XINT1 -#define IRQ_IQ80332_INTC IRQ_IOP331_XINT2 -#define IRQ_IQ80332_INTD IRQ_IOP331_XINT3 - -#endif // _IOP331_IRQ_H_ diff --git a/include/asm-arm/arch-iop3xx/iop331.h b/include/asm-arm/arch-iop3xx/iop331.h deleted file mode 100644 index 4d7bcc62cb3..00000000000 --- a/include/asm-arm/arch-iop3xx/iop331.h +++ /dev/null @@ -1,363 +0,0 @@ -/* - * linux/include/asm/arch-iop3xx/iop331.h - * - * Intel IOP331 Chip definitions - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IOP331_HW_H_ -#define _IOP331_HW_H_ - - -/* - * This is needed for mixed drivers that need to work on all - * IOP3xx variants but behave slightly differently on each. - */ -#ifndef __ASSEMBLY__ -#ifdef CONFIG_ARCH_IOP33X -/*#define iop_is_331() ((processor_id & 0xffffffb0) == 0x69054090) */ -#define iop_is_331() ((processor_id & 0xffffff30) == 0x69054010) -#else -#define iop_is_331() 0 -#endif -#endif - -/* - * IOP331 I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP331_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP331_PCI_LOWER_IO_PA 0x90000000 -#define IOP331_PCI_LOWER_IO_VA 0xfe000000 -#define IOP331_PCI_LOWER_IO_BA (*IOP331_OIOWTVR) -#define IOP331_PCI_UPPER_IO_PA (IOP331_PCI_LOWER_IO_PA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_IO_VA (IOP331_PCI_LOWER_IO_VA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_IO_BA (IOP331_PCI_LOWER_IO_BA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_IO_OFFSET (IOP331_PCI_LOWER_IO_VA - IOP331_PCI_LOWER_IO_BA) - -/* this can be 128M if OMWTVR1 is set */ -#define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -/* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */ -#define IOP331_PCI_LOWER_MEM_PA 0x80000000 -#define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0) -#define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_MEM_BA (IOP331_PCI_LOWER_MEM_BA + IOP331_PCI_MEM_WINDOW_SIZE - 1) -#define IOP331_PCI_MEM_OFFSET (IOP331_PCI_LOWER_MEM_PA - IOP331_PCI_LOWER_MEM_BA) - -/* - * IOP331 chipset registers - */ -#define IOP331_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ -#define IOP331_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */ -#define IOP331_REG_ADDR(reg) (IOP331_VIRT_MEM_BASE | (reg)) - -/* Reserved 0x00000000 through 0x000000FF */ - -/* Address Translation Unit 0x00000100 through 0x000001FF */ -#define IOP331_ATUVID (volatile u16 *)IOP331_REG_ADDR(0x00000100) -#define IOP331_ATUDID (volatile u16 *)IOP331_REG_ADDR(0x00000102) -#define IOP331_ATUCMD (volatile u16 *)IOP331_REG_ADDR(0x00000104) -#define IOP331_ATUSR (volatile u16 *)IOP331_REG_ADDR(0x00000106) -#define IOP331_ATURID (volatile u8 *)IOP331_REG_ADDR(0x00000108) -#define IOP331_ATUCCR (volatile u32 *)IOP331_REG_ADDR(0x00000109) -#define IOP331_ATUCLSR (volatile u8 *)IOP331_REG_ADDR(0x0000010C) -#define IOP331_ATULT (volatile u8 *)IOP331_REG_ADDR(0x0000010D) -#define IOP331_ATUHTR (volatile u8 *)IOP331_REG_ADDR(0x0000010E) -#define IOP331_ATUBIST (volatile u8 *)IOP331_REG_ADDR(0x0000010F) -#define IOP331_IABAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000110) -#define IOP331_IAUBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000114) -#define IOP331_IABAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000118) -#define IOP331_IAUBAR1 (volatile u32 *)IOP331_REG_ADDR(0x0000011C) -#define IOP331_IABAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000120) -#define IOP331_IAUBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000124) -#define IOP331_ASVIR (volatile u16 *)IOP331_REG_ADDR(0x0000012C) -#define IOP331_ASIR (volatile u16 *)IOP331_REG_ADDR(0x0000012E) -#define IOP331_ERBAR (volatile u32 *)IOP331_REG_ADDR(0x00000130) -#define IOP331_ATU_CAPPTR (volatile u32 *)IOP331_REG_ADDR(0x00000134) -/* Reserved 0x00000138 through 0x0000013B */ -#define IOP331_ATUILR (volatile u8 *)IOP331_REG_ADDR(0x0000013C) -#define IOP331_ATUIPR (volatile u8 *)IOP331_REG_ADDR(0x0000013D) -#define IOP331_ATUMGNT (volatile u8 *)IOP331_REG_ADDR(0x0000013E) -#define IOP331_ATUMLAT (volatile u8 *)IOP331_REG_ADDR(0x0000013F) -#define IOP331_IALR0 (volatile u32 *)IOP331_REG_ADDR(0x00000140) -#define IOP331_IATVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000144) -#define IOP331_ERLR (volatile u32 *)IOP331_REG_ADDR(0x00000148) -#define IOP331_ERTVR (volatile u32 *)IOP331_REG_ADDR(0x0000014C) -#define IOP331_IALR1 (volatile u32 *)IOP331_REG_ADDR(0x00000150) -#define IOP331_IALR2 (volatile u32 *)IOP331_REG_ADDR(0x00000154) -#define IOP331_IATVR2 (volatile u32 *)IOP331_REG_ADDR(0x00000158) -#define IOP331_OIOWTVR (volatile u32 *)IOP331_REG_ADDR(0x0000015C) -#define IOP331_OMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000160) -#define IOP331_OUMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000164) -#define IOP331_OMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x00000168) -#define IOP331_OUMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x0000016C) -/* Reserved 0x00000170 through 0x00000177*/ -#define IOP331_OUDWTVR (volatile u32 *)IOP331_REG_ADDR(0x00000178) -/* Reserved 0x0000017C through 0x0000017F*/ -#define IOP331_ATUCR (volatile u32 *)IOP331_REG_ADDR(0x00000180) -#define IOP331_PCSR (volatile u32 *)IOP331_REG_ADDR(0x00000184) -#define IOP331_ATUISR (volatile u32 *)IOP331_REG_ADDR(0x00000188) -#define IOP331_ATUIMR (volatile u32 *)IOP331_REG_ADDR(0x0000018C) -#define IOP331_IABAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000190) -#define IOP331_IAUBAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000194) -#define IOP331_IALR3 (volatile u32 *)IOP331_REG_ADDR(0x00000198) -#define IOP331_IATVR3 (volatile u32 *)IOP331_REG_ADDR(0x0000019C) -/* Reserved 0x000001A0 through 0x000001A3*/ -#define IOP331_OCCAR (volatile u32 *)IOP331_REG_ADDR(0x000001A4) -/* Reserved 0x000001A8 through 0x000001AB*/ -#define IOP331_OCCDR (volatile u32 *)IOP331_REG_ADDR(0x000001AC) -/* Reserved 0x000001B0 through 0x000001BB*/ -#define IOP331_VPDCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001B8) -#define IOP331_VPDNXTP (volatile u8 *)IOP331_REG_ADDR(0x000001B9) -#define IOP331_VPDAR (volatile u16 *)IOP331_REG_ADDR(0x000001BA) -#define IOP331_VPDDR (volatile u32 *)IOP331_REG_ADDR(0x000001BC) -#define IOP331_PMCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001C0) -#define IOP331_PMNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001C1) -#define IOP331_APMCR (volatile u16 *)IOP331_REG_ADDR(0x000001C2) -#define IOP331_APMCSR (volatile u16 *)IOP331_REG_ADDR(0x000001C4) -/* Reserved 0x000001C6 through 0x000001CF */ -#define IOP331_MSICAPID (volatile u8 *)IOP331_REG_ADDR(0x000001D0) -#define IOP331_MSINXTP (volatile u8 *)IOP331_REG_ADDR(0x000001D1) -#define IOP331_MSIMCR (volatile u16 *)IOP331_REG_ADDR(0x000001D2) -#define IOP331_MSIMAR (volatile u32 *)IOP331_REG_ADDR(0x000001D4) -#define IOP331_MSIMUAR (volatile u32 *)IOP331_REG_ADDR(0x000001D8) -#define IOP331_MSIMDR (volatile u32 *)IOP331_REG_ADDR(0x000001DC) -#define IOP331_PCIXCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001E0) -#define IOP331_PCIXNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001E1) -#define IOP331_PCIXCMD (volatile u16 *)IOP331_REG_ADDR(0x000001E2) -#define IOP331_PCIXSR (volatile u32 *)IOP331_REG_ADDR(0x000001E4) -#define IOP331_PCIIRSR (volatile u32 *)IOP331_REG_ADDR(0x000001EC) - -/* Messaging Unit 0x00000300 through 0x000003FF */ - -/* Reserved 0x00000300 through 0x0000030c */ -#define IOP331_IMR0 (volatile u32 *)IOP331_REG_ADDR(0x00000310) -#define IOP331_IMR1 (volatile u32 *)IOP331_REG_ADDR(0x00000314) -#define IOP331_OMR0 (volatile u32 *)IOP331_REG_ADDR(0x00000318) -#define IOP331_OMR1 (volatile u32 *)IOP331_REG_ADDR(0x0000031C) -#define IOP331_IDR (volatile u32 *)IOP331_REG_ADDR(0x00000320) -#define IOP331_IISR (volatile u32 *)IOP331_REG_ADDR(0x00000324) -#define IOP331_IIMR (volatile u32 *)IOP331_REG_ADDR(0x00000328) -#define IOP331_ODR (volatile u32 *)IOP331_REG_ADDR(0x0000032C) -#define IOP331_OISR (volatile u32 *)IOP331_REG_ADDR(0x00000330) -#define IOP331_OIMR (volatile u32 *)IOP331_REG_ADDR(0x00000334) -/* Reserved 0x00000338 through 0x0000034F */ -#define IOP331_MUCR (volatile u32 *)IOP331_REG_ADDR(0x00000350) -#define IOP331_QBAR (volatile u32 *)IOP331_REG_ADDR(0x00000354) -/* Reserved 0x00000358 through 0x0000035C */ -#define IOP331_IFHPR (volatile u32 *)IOP331_REG_ADDR(0x00000360) -#define IOP331_IFTPR (volatile u32 *)IOP331_REG_ADDR(0x00000364) -#define IOP331_IPHPR (volatile u32 *)IOP331_REG_ADDR(0x00000368) -#define IOP331_IPTPR (volatile u32 *)IOP331_REG_ADDR(0x0000036C) -#define IOP331_OFHPR (volatile u32 *)IOP331_REG_ADDR(0x00000370) -#define IOP331_OFTPR (volatile u32 *)IOP331_REG_ADDR(0x00000374) -#define IOP331_OPHPR (volatile u32 *)IOP331_REG_ADDR(0x00000378) -#define IOP331_OPTPR (volatile u32 *)IOP331_REG_ADDR(0x0000037C) -#define IOP331_IAR (volatile u32 *)IOP331_REG_ADDR(0x00000380) -/* Reserved 0x00000384 through 0x000003FF */ - -/* DMA Controller 0x00000400 through 0x000004FF */ -#define IOP331_DMA0_CCR (volatile u32 *)IOP331_REG_ADDR(0x00000400) -#define IOP331_DMA0_CSR (volatile u32 *)IOP331_REG_ADDR(0x00000404) -#define IOP331_DMA0_DAR (volatile u32 *)IOP331_REG_ADDR(0x0000040C) -#define IOP331_DMA0_NDAR (volatile u32 *)IOP331_REG_ADDR(0x00000410) -#define IOP331_DMA0_PADR (volatile u32 *)IOP331_REG_ADDR(0x00000414) -#define IOP331_DMA0_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000418) -#define IOP331_DMA0_LADR (volatile u32 *)IOP331_REG_ADDR(0X0000041C) -#define IOP331_DMA0_BCR (volatile u32 *)IOP331_REG_ADDR(0x00000420) -#define IOP331_DMA0_DCR (volatile u32 *)IOP331_REG_ADDR(0x00000424) -/* Reserved 0x00000428 through 0x0000043C */ -#define IOP331_DMA1_CCR (volatile u32 *)IOP331_REG_ADDR(0x00000440) -#define IOP331_DMA1_CSR (volatile u32 *)IOP331_REG_ADDR(0x00000444) -#define IOP331_DMA1_DAR (volatile u32 *)IOP331_REG_ADDR(0x0000044C) -#define IOP331_DMA1_NDAR (volatile u32 *)IOP331_REG_ADDR(0x00000450) -#define IOP331_DMA1_PADR (volatile u32 *)IOP331_REG_ADDR(0x00000454) -#define IOP331_DMA1_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000458) -#define IOP331_DMA1_LADR (volatile u32 *)IOP331_REG_ADDR(0x0000045C) -#define IOP331_DMA1_BCR (volatile u32 *)IOP331_REG_ADDR(0x00000460) -#define IOP331_DMA1_DCR (volatile u32 *)IOP331_REG_ADDR(0x00000464) -/* Reserved 0x00000468 through 0x000004FF */ - -/* Memory controller 0x00000500 through 0x0005FF */ - -/* Peripheral bus interface unit 0x00000680 through 0x0006FF */ -#define IOP331_PBCR (volatile u32 *)IOP331_REG_ADDR(0x00000680) -#define IOP331_PBISR (volatile u32 *)IOP331_REG_ADDR(0x00000684) -#define IOP331_PBBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000688) -#define IOP331_PBLR0 (volatile u32 *)IOP331_REG_ADDR(0x0000068C) -#define IOP331_PBBAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000690) -#define IOP331_PBLR1 (volatile u32 *)IOP331_REG_ADDR(0x00000694) -#define IOP331_PBBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000698) -#define IOP331_PBLR2 (volatile u32 *)IOP331_REG_ADDR(0x0000069C) -#define IOP331_PBBAR3 (volatile u32 *)IOP331_REG_ADDR(0x000006A0) -#define IOP331_PBLR3 (volatile u32 *)IOP331_REG_ADDR(0x000006A4) -#define IOP331_PBBAR4 (volatile u32 *)IOP331_REG_ADDR(0x000006A8) -#define IOP331_PBLR4 (volatile u32 *)IOP331_REG_ADDR(0x000006AC) -#define IOP331_PBBAR5 (volatile u32 *)IOP331_REG_ADDR(0x000006B0) -#define IOP331_PBLR5 (volatile u32 *)IOP331_REG_ADDR(0x000006B4) -#define IOP331_PBDSCR (volatile u32 *)IOP331_REG_ADDR(0x000006B8) -/* Reserved 0x000006BC */ -#define IOP331_PMBR0 (volatile u32 *)IOP331_REG_ADDR(0x000006C0) -/* Reserved 0x000006C4 through 0x000006DC */ -#define IOP331_PMBR1 (volatile u32 *)IOP331_REG_ADDR(0x000006E0) -#define IOP331_PMBR2 (volatile u32 *)IOP331_REG_ADDR(0x000006E4) - -#define IOP331_PBCR_EN 0x1 - -#define IOP331_PBISR_BOOR_ERR 0x1 - - - -/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ -/* Internal arbitration unit 0x00000780 through 0x0007BF */ - -/* Interrupt Controller */ -#define IOP331_INTCTL0 (volatile u32 *)IOP331_REG_ADDR(0x00000790) -#define IOP331_INTCTL1 (volatile u32 *)IOP331_REG_ADDR(0x00000794) -#define IOP331_INTSTR0 (volatile u32 *)IOP331_REG_ADDR(0x00000798) -#define IOP331_INTSTR1 (volatile u32 *)IOP331_REG_ADDR(0x0000079C) -#define IOP331_IINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A0) -#define IOP331_IINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007A4) -#define IOP331_FINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A8) -#define IOP331_FINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007AC) -#define IOP331_IPR0 (volatile u32 *)IOP331_REG_ADDR(0x000007B0) -#define IOP331_IPR1 (volatile u32 *)IOP331_REG_ADDR(0x000007B4) -#define IOP331_IPR2 (volatile u32 *)IOP331_REG_ADDR(0x000007B8) -#define IOP331_IPR3 (volatile u32 *)IOP331_REG_ADDR(0x000007BC) -#define IOP331_INTBASE (volatile u32 *)IOP331_REG_ADDR(0x000007C0) -#define IOP331_INTSIZE (volatile u32 *)IOP331_REG_ADDR(0x000007C4) -#define IOP331_IINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007C8) -#define IOP331_FINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007CC) - - -/* Timers */ - -#define IOP331_TU_TMR0 (volatile u32 *)IOP331_REG_ADDR(0x000007D0) -#define IOP331_TU_TMR1 (volatile u32 *)IOP331_REG_ADDR(0x000007D4) - -#define IOP331_TMR_TC 0x01 -#define IOP331_TMR_EN 0x02 -#define IOP331_TMR_RELOAD 0x04 -#define IOP331_TMR_PRIVILEGED 0x09 - -#define IOP331_TMR_RATIO_1_1 0x00 -#define IOP331_TMR_RATIO_4_1 0x10 -#define IOP331_TMR_RATIO_8_1 0x20 -#define IOP331_TMR_RATIO_16_1 0x30 - -#define IOP331_TU_TCR0 (volatile u32 *)IOP331_REG_ADDR(0x000007D8) -#define IOP331_TU_TCR1 (volatile u32 *)IOP331_REG_ADDR(0x000007DC) -#define IOP331_TU_TRR0 (volatile u32 *)IOP331_REG_ADDR(0x000007E0) -#define IOP331_TU_TRR1 (volatile u32 *)IOP331_REG_ADDR(0x000007E4) -#define IOP331_TU_TISR (volatile u32 *)IOP331_REG_ADDR(0x000007E8) -#define IOP331_TU_WDTCR (volatile u32 *)IOP331_REG_ADDR(0x000007EC) - -#if defined(CONFIG_ARCH_IOP33X) -#define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */ -#endif - -#if defined(CONFIG_IOP331_STEPD) || defined(CONFIG_ARCH_IQ80333) -#undef IOP331_TICK_RATE -#define IOP331_TICK_RATE 333000000 /* 333 Mhz IB clock */ -#endif - -/* Application accelerator unit 0x00000800 - 0x000008FF */ -#define IOP331_AAU_ACR (volatile u32 *)IOP331_REG_ADDR(0x00000800) -#define IOP331_AAU_ASR (volatile u32 *)IOP331_REG_ADDR(0x00000804) -#define IOP331_AAU_ADAR (volatile u32 *)IOP331_REG_ADDR(0x00000808) -#define IOP331_AAU_ANDAR (volatile u32 *)IOP331_REG_ADDR(0x0000080C) -#define IOP331_AAU_SAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000810) -#define IOP331_AAU_SAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000814) -#define IOP331_AAU_SAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000818) -#define IOP331_AAU_SAR4 (volatile u32 *)IOP331_REG_ADDR(0x0000081C) -#define IOP331_AAU_SAR5 (volatile u32 *)IOP331_REG_ADDR(0x0000082C) -#define IOP331_AAU_SAR6 (volatile u32 *)IOP331_REG_ADDR(0x00000830) -#define IOP331_AAU_SAR7 (volatile u32 *)IOP331_REG_ADDR(0x00000834) -#define IOP331_AAU_SAR8 (volatile u32 *)IOP331_REG_ADDR(0x00000838) -#define IOP331_AAU_SAR9 (volatile u32 *)IOP331_REG_ADDR(0x00000840) -#define IOP331_AAU_SAR10 (volatile u32 *)IOP331_REG_ADDR(0x00000844) -#define IOP331_AAU_SAR11 (volatile u32 *)IOP331_REG_ADDR(0x00000848) -#define IOP331_AAU_SAR12 (volatile u32 *)IOP331_REG_ADDR(0x0000084C) -#define IOP331_AAU_SAR13 (volatile u32 *)IOP331_REG_ADDR(0x00000850) -#define IOP331_AAU_SAR14 (volatile u32 *)IOP331_REG_ADDR(0x00000854) -#define IOP331_AAU_SAR15 (volatile u32 *)IOP331_REG_ADDR(0x00000858) -#define IOP331_AAU_SAR16 (volatile u32 *)IOP331_REG_ADDR(0x0000085C) -#define IOP331_AAU_SAR17 (volatile u32 *)IOP331_REG_ADDR(0x00000864) -#define IOP331_AAU_SAR18 (volatile u32 *)IOP331_REG_ADDR(0x00000868) -#define IOP331_AAU_SAR19 (volatile u32 *)IOP331_REG_ADDR(0x0000086C) -#define IOP331_AAU_SAR20 (volatile u32 *)IOP331_REG_ADDR(0x00000870) -#define IOP331_AAU_SAR21 (volatile u32 *)IOP331_REG_ADDR(0x00000874) -#define IOP331_AAU_SAR22 (volatile u32 *)IOP331_REG_ADDR(0x00000878) -#define IOP331_AAU_SAR23 (volatile u32 *)IOP331_REG_ADDR(0x0000087C) -#define IOP331_AAU_SAR24 (volatile u32 *)IOP331_REG_ADDR(0x00000880) -#define IOP331_AAU_SAR25 (volatile u32 *)IOP331_REG_ADDR(0x00000888) -#define IOP331_AAU_SAR26 (volatile u32 *)IOP331_REG_ADDR(0x0000088C) -#define IOP331_AAU_SAR27 (volatile u32 *)IOP331_REG_ADDR(0x00000890) -#define IOP331_AAU_SAR28 (volatile u32 *)IOP331_REG_ADDR(0x00000894) -#define IOP331_AAU_SAR29 (volatile u32 *)IOP331_REG_ADDR(0x00000898) -#define IOP331_AAU_SAR30 (volatile u32 *)IOP331_REG_ADDR(0x0000089C) -#define IOP331_AAU_SAR31 (volatile u32 *)IOP331_REG_ADDR(0x000008A0) -#define IOP331_AAU_SAR32 (volatile u32 *)IOP331_REG_ADDR(0x000008A4) -#define IOP331_AAU_DAR (volatile u32 *)IOP331_REG_ADDR(0x00000820) -#define IOP331_AAU_ABCR (volatile u32 *)IOP331_REG_ADDR(0x00000824) -#define IOP331_AAU_ADCR (volatile u32 *)IOP331_REG_ADDR(0x00000828) -#define IOP331_AAU_EDCR0 (volatile u32 *)IOP331_REG_ADDR(0x0000083c) -#define IOP331_AAU_EDCR1 (volatile u32 *)IOP331_REG_ADDR(0x00000860) -#define IOP331_AAU_EDCR2 (volatile u32 *)IOP331_REG_ADDR(0x00000884) - - -#define IOP331_SPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C0) -#define IOP331_PPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C8) -/* SSP serial port unit 0x00001600 - 0x0000167F */ - -/* I2C bus interface unit 0x00001680 - 0x000016FF */ -/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ - -#define IOP331_ICR0 (volatile u32 *)IOP331_REG_ADDR(0x00001680) -#define IOP331_ISR0 (volatile u32 *)IOP331_REG_ADDR(0x00001684) -#define IOP331_ISAR0 (volatile u32 *)IOP331_REG_ADDR(0x00001688) -#define IOP331_IDBR0 (volatile u32 *)IOP331_REG_ADDR(0x0000168C) -/* Reserved 0x00001690 */ -#define IOP331_IBMR0 (volatile u32 *)IOP331_REG_ADDR(0x00001694) -/* Reserved 0x00001698 */ -/* Reserved 0x0000169C */ -#define IOP331_ICR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A0) -#define IOP331_ISR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A4) -#define IOP331_ISAR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A8) -#define IOP331_IDBR1 (volatile u32 *)IOP331_REG_ADDR(0x000016AC) -#define IOP331_IBMR1 (volatile u32 *)IOP331_REG_ADDR(0x000016B4) -/* Reserved 0x000016B8 through 0x000016FF */ - -/* 0x00001700 through 0x0000172C UART 0 */ - -/* Reserved 0x00001730 through 0x0000173F */ - -/* 0x00001740 through 0x0000176C UART 1 */ - -#define IOP331_UART0_PHYS (IOP331_PHYS_MEM_BASE | 0x00001700) /* UART #1 physical */ -#define IOP331_UART1_PHYS (IOP331_PHYS_MEM_BASE | 0x00001740) /* UART #2 physical */ -#define IOP331_UART0_VIRT (IOP331_VIRT_MEM_BASE | 0x00001700) /* UART #1 virtual addr */ -#define IOP331_UART1_VIRT (IOP331_VIRT_MEM_BASE | 0x00001740) /* UART #2 virtual addr */ - -/* Reserved 0x00001770 through 0x0000177F */ - -/* General Purpose I/O Registers */ -#define IOP331_GPOE (volatile u32 *)IOP331_REG_ADDR(0x00001780) -#define IOP331_GPID (volatile u32 *)IOP331_REG_ADDR(0x00001784) -#define IOP331_GPOD (volatile u32 *)IOP331_REG_ADDR(0x00001788) - -/* Reserved 0x0000178c through 0x000019ff */ - - -#ifndef __ASSEMBLY__ -extern void iop331_map_io(void); -extern void iop331_init_irq(void); -extern void iop331_time_init(void); -#endif - -#endif // _IOP331_HW_H_ diff --git a/include/asm-arm/arch-iop3xx/iq31244.h b/include/asm-arm/arch-iop3xx/iq31244.h deleted file mode 100644 index 4177cfa8100..00000000000 --- a/include/asm-arm/arch-iop3xx/iq31244.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm/arch-iop3xx/iq31244.h - * - * Intel IQ31244 evaluation board registers - */ - -#ifndef _IQ31244_H_ -#define _IQ31244_H_ - -#define IQ31244_FLASHBASE 0xf0000000 /* Flash */ -#define IQ31244_FLASHSIZE 0x00800000 -#define IQ31244_FLASHWIDTH 2 - -#define IQ31244_UART 0xfe800000 /* UART #1 */ -#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */ -#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ -#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ -#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */ - -#ifndef __ASSEMBLY__ -extern void iq31244_map_io(void); -#endif - -#endif // _IQ31244_H_ diff --git a/include/asm-arm/arch-iop3xx/iq80321.h b/include/asm-arm/arch-iop3xx/iq80321.h deleted file mode 100644 index cb8725979ff..00000000000 --- a/include/asm-arm/arch-iop3xx/iq80321.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm/arch-iop3xx/iq80321.h - * - * Intel IQ80321 evaluation board registers - */ - -#ifndef _IQ80321_H_ -#define _IQ80321_H_ - -#define IQ80321_FLASHBASE 0xf0000000 /* Flash */ -#define IQ80321_FLASHSIZE 0x00800000 -#define IQ80321_FLASHWIDTH 1 - -#define IQ80321_UART 0xfe800000 /* UART #1 */ -#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */ -#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ -#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ -#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */ - -#ifndef __ASSEMBLY__ -extern void iq80321_map_io(void); -#endif - -#endif // _IQ80321_H_ diff --git a/include/asm-arm/arch-iop3xx/iq80331.h b/include/asm-arm/arch-iop3xx/iq80331.h deleted file mode 100644 index 0668e78d483..00000000000 --- a/include/asm-arm/arch-iop3xx/iq80331.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm/arch-iop3xx/iq80331.h - * - * Intel IQ80331 evaluation board registers - */ - -#ifndef _IQ80331_H_ -#define _IQ80331_H_ - -#define IQ80331_FLASHBASE 0xc0000000 /* Flash */ -#define IQ80331_FLASHSIZE 0x00800000 -#define IQ80331_FLASHWIDTH 1 - -#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */ -#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ -#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */ -#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */ - -#ifndef __ASSEMBLY__ -extern void iq80331_map_io(void); -#endif - -#endif // _IQ80331_H_ diff --git a/include/asm-arm/arch-iop3xx/iq80332.h b/include/asm-arm/arch-iop3xx/iq80332.h deleted file mode 100644 index e5fff1775d1..00000000000 --- a/include/asm-arm/arch-iop3xx/iq80332.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm/arch-iop3xx/iq80332.h - * - * Intel IQ80332 evaluation board registers - */ - -#ifndef _IQ80332_H_ -#define _IQ80332_H_ - -#define IQ80332_FLASHBASE 0xc0000000 /* Flash */ -#define IQ80332_FLASHSIZE 0x00800000 -#define IQ80332_FLASHWIDTH 1 - -#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */ -#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ -#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */ -#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */ - -#ifndef __ASSEMBLY__ -extern void iq80332_map_io(void); -#endif - -#endif // _IQ80332_H_ diff --git a/include/asm-arm/arch-iop3xx/irqs.h b/include/asm-arm/arch-iop3xx/irqs.h deleted file mode 100644 index 4f7c7aa87b4..00000000000 --- a/include/asm-arm/arch-iop3xx/irqs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/irqs.h - * - * Copyright: (C) 2001-2003 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* - * Chipset-specific bits - */ -#ifdef CONFIG_ARCH_IOP32X -#include "iop321-irqs.h" -#endif - -#ifdef CONFIG_ARCH_IOP33X -#include "iop331-irqs.h" -#endif diff --git a/include/asm-arm/arch-iop3xx/memory.h b/include/asm-arm/arch-iop3xx/memory.h deleted file mode 100644 index 25666184e8f..00000000000 --- a/include/asm-arm/arch-iop3xx/memory.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#ifndef CONFIG_ARCH_IOP33X -#define PHYS_OFFSET UL(0xa0000000) -#else -#define PHYS_OFFSET UL(0x00000000) -#endif - -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#if defined(CONFIG_ARCH_IOP32X) - -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2))) - -#elif defined(CONFIG_ARCH_IOP33X) - -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2))) - -#endif - -#endif diff --git a/include/asm-arm/arch-iop3xx/system.h b/include/asm-arm/arch-iop3xx/system.h deleted file mode 100644 index a16cbb77a7f..00000000000 --- a/include/asm-arm/arch-iop3xx/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - - -static inline void arch_reset(char mode) -{ -#ifdef CONFIG_ARCH_IOP32X - *IOP321_PCSR = 0x30; -#endif - -#ifdef CONFIG_ARCH_IOP33X - *IOP331_PCSR = 0x30; -#endif - - if ( 1 && mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* No on-chip reset capability */ - cpu_reset(0); - } -} - diff --git a/include/asm-arm/arch-iop3xx/timex.h b/include/asm-arm/arch-iop3xx/timex.h deleted file mode 100644 index 14ca8d0f7b2..00000000000 --- a/include/asm-arm/arch-iop3xx/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/timex.h - * - * IOP3xx architecture timex specifications - */ -#include - -#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244) - -#define CLOCK_TICK_RATE IOP321_TICK_RATE - -#elif defined(CONFIG_ARCH_IQ80331) || defined(CONFIG_MACH_IQ80332) - -#define CLOCK_TICK_RATE IOP331_TICK_RATE - -#else - -#error "No IOP3xx timex information for this architecture" - -#endif diff --git a/include/asm-arm/arch-iop3xx/uncompress.h b/include/asm-arm/arch-iop3xx/uncompress.h deleted file mode 100644 index 066c16bc125..00000000000 --- a/include/asm-arm/arch-iop3xx/uncompress.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/uncompress.h - */ -#include -#include -#include -#include - -#ifdef CONFIG_ARCH_IOP32X -#define UTYPE unsigned char * -#elif defined(CONFIG_ARCH_IOP33X) -#define UTYPE u32 * -#else -#error "Missing IOP3xx arch type def" -#endif - -static volatile UTYPE uart_base; - -#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - *uart_base = c; -} - -static inline void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - if(machine_is_iq80321()) - uart_base = (volatile UTYPE)IQ80321_UART; - else if(machine_is_iq31244()) - uart_base = (volatile UTYPE)IQ31244_UART; - else if(machine_is_iq80331() || machine_is_iq80332()) - uart_base = (volatile UTYPE)IOP331_UART0_PHYS; - else - uart_base = (volatile UTYPE)0xfe800000; -} - -/* - * nothing to do - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop3xx/vmalloc.h b/include/asm-arm/arch-iop3xx/vmalloc.h deleted file mode 100644 index 0f2f6847f93..00000000000 --- a/include/asm-arm/arch-iop3xx/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/vmalloc.h - */ - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -//#define VMALLOC_END (0xe8000000) -/* increase usable physical RAM to ~992M per RMK */ -#define VMALLOC_END (0xfe000000) - -- cgit v1.2.3 From 7ae1f7ec525c32db441836ab0ab010b85cb819a2 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:12:53 +0100 Subject: [ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x code Introduce the arch/arm/plat-iop directory, for code shared between the iop32x and iop33x, and move the common memory map setup bits there. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop321.h | 1 - include/asm-arm/arch-iop33x/iop331.h | 1 - include/asm-arm/hardware/iop3xx.h | 43 ++++++++++++++++++++++++++++++++++++ 3 files changed, 43 insertions(+), 2 deletions(-) create mode 100644 include/asm-arm/hardware/iop3xx.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 7ba93faf8da..307272b0780 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -333,7 +333,6 @@ #ifndef __ASSEMBLY__ -extern void iop321_map_io(void); extern void iop321_init_irq(void); extern void iop321_time_init(void); #endif diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index 780b707edb1..21430f877ea 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -350,7 +350,6 @@ #ifndef __ASSEMBLY__ -extern void iop331_map_io(void); extern void iop331_init_irq(void); extern void iop331_time_init(void); #endif diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h new file mode 100644 index 00000000000..c17cc19cdfa --- /dev/null +++ b/include/asm-arm/hardware/iop3xx.h @@ -0,0 +1,43 @@ +/* + * include/asm-arm/hardware/iop3xx.h + * + * Intel IOP32X and IOP33X register definitions + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOP3XX_H +#define __IOP3XX_H + +/* + * IOP3XX processor registers + */ +#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 +#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 +#define IOP3XX_PERIPHERAL_SIZE 0x00002000 +#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) + + +/* + * IOP3XX I/O and Mem space regions for PCI autoconfiguration + */ +#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x04000000 +#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 + +#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 +#define IOP3XX_PCI_LOWER_IO_PA 0x90000000 +#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 + + +#ifndef __ASSEMBLY__ +void iop3xx_map_io(void); +#endif + + +#endif -- cgit v1.2.3 From e25d64f1242e8586f6e20c26fd876a4d956a6c45 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:15:21 +0100 Subject: [ARM] 3819/1: iop3xx: factor out shared i2c code Move the i2c bits shared between iop32x and iop33x to plat-iop/i2c.c and include/asm-arm/hardware/iop3xx.h. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop321.h | 14 -------------- include/asm-arm/arch-iop33x/iop331.h | 16 ---------------- include/asm-arm/hardware/iop3xx.h | 15 +++++++++++++++ 3 files changed, 15 insertions(+), 30 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 307272b0780..1a82dd96bf5 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -314,20 +314,6 @@ /* SSP serial port unit 0x00001600 - 0x0000167F */ /* I2C bus interface unit 0x00001680 - 0x000016FF */ -#define IOP321_ICR0 (volatile u32 *)IOP321_REG_ADDR(0x00001680) -#define IOP321_ISR0 (volatile u32 *)IOP321_REG_ADDR(0x00001684) -#define IOP321_ISAR0 (volatile u32 *)IOP321_REG_ADDR(0x00001688) -#define IOP321_IDBR0 (volatile u32 *)IOP321_REG_ADDR(0x0000168C) -/* Reserved 0x00001690 */ -#define IOP321_IBMR0 (volatile u32 *)IOP321_REG_ADDR(0x00001694) -/* Reserved 0x00001698 */ -/* Reserved 0x0000169C */ -#define IOP321_ICR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A0) -#define IOP321_ISR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A4) -#define IOP321_ISAR1 (volatile u32 *)IOP321_REG_ADDR(0x000016A8) -#define IOP321_IDBR1 (volatile u32 *)IOP321_REG_ADDR(0x000016AC) -#define IOP321_IBMR1 (volatile u32 *)IOP321_REG_ADDR(0x000016B4) -/* Reserved 0x000016B8 through 0x000016FC */ /* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index 21430f877ea..a7f47122c5e 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -311,22 +311,6 @@ /* SSP serial port unit 0x00001600 - 0x0000167F */ /* I2C bus interface unit 0x00001680 - 0x000016FF */ -/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ - -#define IOP331_ICR0 (volatile u32 *)IOP331_REG_ADDR(0x00001680) -#define IOP331_ISR0 (volatile u32 *)IOP331_REG_ADDR(0x00001684) -#define IOP331_ISAR0 (volatile u32 *)IOP331_REG_ADDR(0x00001688) -#define IOP331_IDBR0 (volatile u32 *)IOP331_REG_ADDR(0x0000168C) -/* Reserved 0x00001690 */ -#define IOP331_IBMR0 (volatile u32 *)IOP331_REG_ADDR(0x00001694) -/* Reserved 0x00001698 */ -/* Reserved 0x0000169C */ -#define IOP331_ICR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A0) -#define IOP331_ISR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A4) -#define IOP331_ISAR1 (volatile u32 *)IOP331_REG_ADDR(0x000016A8) -#define IOP331_IDBR1 (volatile u32 *)IOP331_REG_ADDR(0x000016AC) -#define IOP331_IBMR1 (volatile u32 *)IOP331_REG_ADDR(0x000016B4) -/* Reserved 0x000016B8 through 0x000016FF */ /* 0x00001700 through 0x0000172C UART 0 */ diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index c17cc19cdfa..ea7d0597000 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -23,6 +23,18 @@ #define IOP3XX_PERIPHERAL_SIZE 0x00002000 #define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) +/* I2C bus interface unit */ +#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) +#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) +#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688) +#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c) +#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694) +#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0) +#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4) +#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8) +#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac) +#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4) + /* * IOP3XX I/O and Mem space regions for PCI autoconfiguration @@ -37,6 +49,9 @@ #ifndef __ASSEMBLY__ void iop3xx_map_io(void); + +extern struct platform_device iop3xx_i2c0_device; +extern struct platform_device iop3xx_i2c1_device; #endif -- cgit v1.2.3 From 0cb015f9dea8a40d82d170be1a4f39ff909890bf Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:16:23 +0100 Subject: [ARM] 3820/1: iop3xx: factor out shared pci code Merge the iop32x PCI code and iop33x PCI code into plat-iop/pci.c. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/hardware/iop3xx.h | 60 +++++++++++++++++++++++++++++++++++++++ include/asm-arm/mach/pci.h | 4 +++ 2 files changed, 64 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index ea7d0597000..d488ced2e12 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -23,6 +23,64 @@ #define IOP3XX_PERIPHERAL_SIZE 0x00002000 #define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) +/* Address Translation Unit */ +#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100) +#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102) +#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104) +#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106) +#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108) +#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109) +#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c) +#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d) +#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e) +#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f) +#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110) +#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114) +#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118) +#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c) +#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120) +#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124) +#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c) +#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e) +#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130) +#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c) +#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d) +#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e) +#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f) +#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140) +#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144) +#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148) +#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c) +#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150) +#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154) +#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158) +#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c) +#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160) +#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164) +#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168) +#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c) +#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178) +#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180) +#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184) +#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188) +#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c) +#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190) +#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194) +#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198) +#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c) +#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4) +#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac) +#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc) +#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0) +#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1) +#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2) +#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4) +#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0) +#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1) +#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2) +#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) +#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) + /* I2C bus interface unit */ #define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) #define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) @@ -41,10 +99,12 @@ */ #define IOP3XX_PCI_MEM_WINDOW_SIZE 0x04000000 #define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 +#define IOP3XX_PCI_LOWER_MEM_BA (*IOP3XX_OMWTVR0) #define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 #define IOP3XX_PCI_LOWER_IO_PA 0x90000000 #define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 +#define IOP3XX_PCI_LOWER_IO_BA (*IOP3XX_OIOWTVR) #ifndef __ASSEMBLY__ diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index 923e0ca6620..cb41defad4a 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h @@ -52,6 +52,10 @@ void pci_common_init(struct hw_pci *); /* * PCI controllers */ +extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); +extern void iop3xx_pci_preinit(void); + extern int iop321_setup(int nr, struct pci_sys_data *); extern struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *); extern void iop321_init(void); -- cgit v1.2.3 From 7e9740b11529a0a69789fbe92d324f293e6266f6 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:17:36 +0100 Subject: [ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci code Switch the iop32x and iop33x code over to the common PCI implementation, and remove the (nearly identical) iop32x and iop33x PCI implementations. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/hardware.h | 20 +------ include/asm-arm/arch-iop32x/iop321.h | 86 +----------------------------- include/asm-arm/arch-iop32x/memory.h | 4 +- include/asm-arm/arch-iop32x/system.h | 2 +- include/asm-arm/arch-iop33x/hardware.h | 20 +------ include/asm-arm/arch-iop33x/iop331.h | 96 +--------------------------------- include/asm-arm/arch-iop33x/memory.h | 4 +- include/asm-arm/arch-iop33x/system.h | 2 +- include/asm-arm/mach/pci.h | 8 --- 9 files changed, 14 insertions(+), 228 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h index 8fb10134a10..16d0630ab25 100644 --- a/include/asm-arm/arch-iop32x/hardware.h +++ b/include/asm-arm/arch-iop32x/hardware.h @@ -19,26 +19,10 @@ */ #define pcibios_assign_all_busses() 1 +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0x00000000 -/* - * The min PCI I/O and MEM space are dependent on what specific - * chipset/platform we are running on, so instead of hardcoding with - * #ifdefs, we just fill these in the platform level PCI init code. - */ -#ifndef __ASSEMBLY__ -extern unsigned long iop3xx_pcibios_min_io; -extern unsigned long iop3xx_pcibios_min_mem; - -extern unsigned int processor_id; -#endif - -/* - * We just set these to zero since they are really bogus anyways - */ -#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) - /* * Generic chipset bits * diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 1a82dd96bf5..e3c85a05e73 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -24,27 +24,6 @@ #define iop_is_321() 1 #endif -/* - * IOP321 I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP321_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP321_PCI_LOWER_IO_PA 0x90000000 -#define IOP321_PCI_LOWER_IO_VA 0xfe000000 -#define IOP321_PCI_LOWER_IO_BA (*IOP321_OIOWTVR) -#define IOP321_PCI_UPPER_IO_PA (IOP321_PCI_LOWER_IO_PA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_IO_VA (IOP321_PCI_LOWER_IO_VA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA) - -/* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */ -#define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -#define IOP321_PCI_LOWER_MEM_PA 0x80000000 -#define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0) -#define IOP321_PCI_UPPER_MEM_PA (IOP321_PCI_LOWER_MEM_PA + IOP321_PCI_MEM_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_MEM_BA (IOP321_PCI_LOWER_MEM_BA + IOP321_PCI_MEM_WINDOW_SIZE - 1) -#define IOP321_PCI_MEM_OFFSET (IOP321_PCI_LOWER_MEM_PA - IOP321_PCI_LOWER_MEM_BA) - - /* * IOP321 chipset registers */ @@ -55,69 +34,6 @@ /* Reserved 0x00000000 through 0x000000FF */ /* Address Translation Unit 0x00000100 through 0x000001FF */ -#define IOP321_ATUVID (volatile u16 *)IOP321_REG_ADDR(0x00000100) -#define IOP321_ATUDID (volatile u16 *)IOP321_REG_ADDR(0x00000102) -#define IOP321_ATUCMD (volatile u16 *)IOP321_REG_ADDR(0x00000104) -#define IOP321_ATUSR (volatile u16 *)IOP321_REG_ADDR(0x00000106) -#define IOP321_ATURID (volatile u8 *)IOP321_REG_ADDR(0x00000108) -#define IOP321_ATUCCR (volatile u32 *)IOP321_REG_ADDR(0x00000109) -#define IOP321_ATUCLSR (volatile u8 *)IOP321_REG_ADDR(0x0000010C) -#define IOP321_ATULT (volatile u8 *)IOP321_REG_ADDR(0x0000010D) -#define IOP321_ATUHTR (volatile u8 *)IOP321_REG_ADDR(0x0000010E) -#define IOP321_ATUBIST (volatile u8 *)IOP321_REG_ADDR(0x0000010F) -#define IOP321_IABAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000110) -#define IOP321_IAUBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000114) -#define IOP321_IABAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000118) -#define IOP321_IAUBAR1 (volatile u32 *)IOP321_REG_ADDR(0x0000011C) -#define IOP321_IABAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000120) -#define IOP321_IAUBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000124) -#define IOP321_ASVIR (volatile u16 *)IOP321_REG_ADDR(0x0000012C) -#define IOP321_ASIR (volatile u16 *)IOP321_REG_ADDR(0x0000012E) -#define IOP321_ERBAR (volatile u32 *)IOP321_REG_ADDR(0x00000130) -/* Reserved 0x00000134 through 0x0000013B */ -#define IOP321_ATUILR (volatile u8 *)IOP321_REG_ADDR(0x0000013C) -#define IOP321_ATUIPR (volatile u8 *)IOP321_REG_ADDR(0x0000013D) -#define IOP321_ATUMGNT (volatile u8 *)IOP321_REG_ADDR(0x0000013E) -#define IOP321_ATUMLAT (volatile u8 *)IOP321_REG_ADDR(0x0000013F) -#define IOP321_IALR0 (volatile u32 *)IOP321_REG_ADDR(0x00000140) -#define IOP321_IATVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000144) -#define IOP321_ERLR (volatile u32 *)IOP321_REG_ADDR(0x00000148) -#define IOP321_ERTVR (volatile u32 *)IOP321_REG_ADDR(0x0000014C) -#define IOP321_IALR1 (volatile u32 *)IOP321_REG_ADDR(0x00000150) -#define IOP321_IALR2 (volatile u32 *)IOP321_REG_ADDR(0x00000154) -#define IOP321_IATVR2 (volatile u32 *)IOP321_REG_ADDR(0x00000158) -#define IOP321_OIOWTVR (volatile u32 *)IOP321_REG_ADDR(0x0000015C) -#define IOP321_OMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000160) -#define IOP321_OUMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000164) -#define IOP321_OMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x00000168) -#define IOP321_OUMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x0000016C) -/* Reserved 0x00000170 through 0x00000177*/ -#define IOP321_OUDWTVR (volatile u32 *)IOP321_REG_ADDR(0x00000178) -/* Reserved 0x0000017C through 0x0000017F*/ -#define IOP321_ATUCR (volatile u32 *)IOP321_REG_ADDR(0x00000180) -#define IOP321_PCSR (volatile u32 *)IOP321_REG_ADDR(0x00000184) -#define IOP321_ATUISR (volatile u32 *)IOP321_REG_ADDR(0x00000188) -#define IOP321_ATUIMR (volatile u32 *)IOP321_REG_ADDR(0x0000018C) -#define IOP321_IABAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000190) -#define IOP321_IAUBAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000194) -#define IOP321_IALR3 (volatile u32 *)IOP321_REG_ADDR(0x00000198) -#define IOP321_IATVR3 (volatile u32 *)IOP321_REG_ADDR(0x0000019C) -/* Reserved 0x000001A0 through 0x000001A3*/ -#define IOP321_OCCAR (volatile u32 *)IOP321_REG_ADDR(0x000001A4) -/* Reserved 0x000001A8 through 0x000001AB*/ -#define IOP321_OCCDR (volatile u32 *)IOP321_REG_ADDR(0x000001AC) -/* Reserved 0x000001B0 through 0x000001BB*/ -#define IOP321_PDSCR (volatile u32 *)IOP321_REG_ADDR(0x000001BC) -#define IOP321_PMCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001C0) -#define IOP321_PMNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001C1) -#define IOP321_APMCR (volatile u16 *)IOP321_REG_ADDR(0x000001C2) -#define IOP321_APMCSR (volatile u16 *)IOP321_REG_ADDR(0x000001C4) -/* Reserved 0x000001C6 through 0x000001DF */ -#define IOP321_PCIXCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001E0) -#define IOP321_PCIXNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001E1) -#define IOP321_PCIXCMD (volatile u16 *)IOP321_REG_ADDR(0x000001E2) -#define IOP321_PCIXSR (volatile u32 *)IOP321_REG_ADDR(0x000001E4) -#define IOP321_PCIIRSR (volatile u32 *)IOP321_REG_ADDR(0x000001EC) /* Messaging Unit 0x00000300 through 0x000003FF */ @@ -317,6 +233,8 @@ /* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ +#include + #ifndef __ASSEMBLY__ extern void iop321_init_irq(void); diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h index b4073f15b40..4c64d9e7229 100644 --- a/include/asm-arm/arch-iop32x/memory.h +++ b/include/asm-arm/arch-iop32x/memory.h @@ -20,8 +20,8 @@ * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2))) +#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) +#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) #endif diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h index d4c8d691e1b..1ac207a0d52 100644 --- a/include/asm-arm/arch-iop32x/system.h +++ b/include/asm-arm/arch-iop32x/system.h @@ -16,7 +16,7 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - *IOP321_PCSR = 0x30; + *IOP3XX_PCSR = 0x30; if ( 1 && mode == 's') { /* Jump into ROM at address 0 */ diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h index 4a457084c5c..5e3cb32af02 100644 --- a/include/asm-arm/arch-iop33x/hardware.h +++ b/include/asm-arm/arch-iop33x/hardware.h @@ -19,26 +19,10 @@ */ #define pcibios_assign_all_busses() 1 +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0x00000000 -/* - * The min PCI I/O and MEM space are dependent on what specific - * chipset/platform we are running on, so instead of hardcoding with - * #ifdefs, we just fill these in the platform level PCI init code. - */ -#ifndef __ASSEMBLY__ -extern unsigned long iop3xx_pcibios_min_io; -extern unsigned long iop3xx_pcibios_min_mem; - -extern unsigned int processor_id; -#endif - -/* - * We just set these to zero since they are really bogus anyways - */ -#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) - /* * Generic chipset bits * diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index a7f47122c5e..e85e1a2e1a8 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -23,27 +23,6 @@ #define iop_is_331() 1 #endif -/* - * IOP331 I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP331_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP331_PCI_LOWER_IO_PA 0x90000000 -#define IOP331_PCI_LOWER_IO_VA 0xfe000000 -#define IOP331_PCI_LOWER_IO_BA (*IOP331_OIOWTVR) -#define IOP331_PCI_UPPER_IO_PA (IOP331_PCI_LOWER_IO_PA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_IO_VA (IOP331_PCI_LOWER_IO_VA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_IO_BA (IOP331_PCI_LOWER_IO_BA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_IO_OFFSET (IOP331_PCI_LOWER_IO_VA - IOP331_PCI_LOWER_IO_BA) - -/* this can be 128M if OMWTVR1 is set */ -#define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -/* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */ -#define IOP331_PCI_LOWER_MEM_PA 0x80000000 -#define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0) -#define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_MEM_BA (IOP331_PCI_LOWER_MEM_BA + IOP331_PCI_MEM_WINDOW_SIZE - 1) -#define IOP331_PCI_MEM_OFFSET (IOP331_PCI_LOWER_MEM_PA - IOP331_PCI_LOWER_MEM_BA) - /* * IOP331 chipset registers */ @@ -54,79 +33,6 @@ /* Reserved 0x00000000 through 0x000000FF */ /* Address Translation Unit 0x00000100 through 0x000001FF */ -#define IOP331_ATUVID (volatile u16 *)IOP331_REG_ADDR(0x00000100) -#define IOP331_ATUDID (volatile u16 *)IOP331_REG_ADDR(0x00000102) -#define IOP331_ATUCMD (volatile u16 *)IOP331_REG_ADDR(0x00000104) -#define IOP331_ATUSR (volatile u16 *)IOP331_REG_ADDR(0x00000106) -#define IOP331_ATURID (volatile u8 *)IOP331_REG_ADDR(0x00000108) -#define IOP331_ATUCCR (volatile u32 *)IOP331_REG_ADDR(0x00000109) -#define IOP331_ATUCLSR (volatile u8 *)IOP331_REG_ADDR(0x0000010C) -#define IOP331_ATULT (volatile u8 *)IOP331_REG_ADDR(0x0000010D) -#define IOP331_ATUHTR (volatile u8 *)IOP331_REG_ADDR(0x0000010E) -#define IOP331_ATUBIST (volatile u8 *)IOP331_REG_ADDR(0x0000010F) -#define IOP331_IABAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000110) -#define IOP331_IAUBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000114) -#define IOP331_IABAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000118) -#define IOP331_IAUBAR1 (volatile u32 *)IOP331_REG_ADDR(0x0000011C) -#define IOP331_IABAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000120) -#define IOP331_IAUBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000124) -#define IOP331_ASVIR (volatile u16 *)IOP331_REG_ADDR(0x0000012C) -#define IOP331_ASIR (volatile u16 *)IOP331_REG_ADDR(0x0000012E) -#define IOP331_ERBAR (volatile u32 *)IOP331_REG_ADDR(0x00000130) -#define IOP331_ATU_CAPPTR (volatile u32 *)IOP331_REG_ADDR(0x00000134) -/* Reserved 0x00000138 through 0x0000013B */ -#define IOP331_ATUILR (volatile u8 *)IOP331_REG_ADDR(0x0000013C) -#define IOP331_ATUIPR (volatile u8 *)IOP331_REG_ADDR(0x0000013D) -#define IOP331_ATUMGNT (volatile u8 *)IOP331_REG_ADDR(0x0000013E) -#define IOP331_ATUMLAT (volatile u8 *)IOP331_REG_ADDR(0x0000013F) -#define IOP331_IALR0 (volatile u32 *)IOP331_REG_ADDR(0x00000140) -#define IOP331_IATVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000144) -#define IOP331_ERLR (volatile u32 *)IOP331_REG_ADDR(0x00000148) -#define IOP331_ERTVR (volatile u32 *)IOP331_REG_ADDR(0x0000014C) -#define IOP331_IALR1 (volatile u32 *)IOP331_REG_ADDR(0x00000150) -#define IOP331_IALR2 (volatile u32 *)IOP331_REG_ADDR(0x00000154) -#define IOP331_IATVR2 (volatile u32 *)IOP331_REG_ADDR(0x00000158) -#define IOP331_OIOWTVR (volatile u32 *)IOP331_REG_ADDR(0x0000015C) -#define IOP331_OMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000160) -#define IOP331_OUMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000164) -#define IOP331_OMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x00000168) -#define IOP331_OUMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x0000016C) -/* Reserved 0x00000170 through 0x00000177*/ -#define IOP331_OUDWTVR (volatile u32 *)IOP331_REG_ADDR(0x00000178) -/* Reserved 0x0000017C through 0x0000017F*/ -#define IOP331_ATUCR (volatile u32 *)IOP331_REG_ADDR(0x00000180) -#define IOP331_PCSR (volatile u32 *)IOP331_REG_ADDR(0x00000184) -#define IOP331_ATUISR (volatile u32 *)IOP331_REG_ADDR(0x00000188) -#define IOP331_ATUIMR (volatile u32 *)IOP331_REG_ADDR(0x0000018C) -#define IOP331_IABAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000190) -#define IOP331_IAUBAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000194) -#define IOP331_IALR3 (volatile u32 *)IOP331_REG_ADDR(0x00000198) -#define IOP331_IATVR3 (volatile u32 *)IOP331_REG_ADDR(0x0000019C) -/* Reserved 0x000001A0 through 0x000001A3*/ -#define IOP331_OCCAR (volatile u32 *)IOP331_REG_ADDR(0x000001A4) -/* Reserved 0x000001A8 through 0x000001AB*/ -#define IOP331_OCCDR (volatile u32 *)IOP331_REG_ADDR(0x000001AC) -/* Reserved 0x000001B0 through 0x000001BB*/ -#define IOP331_VPDCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001B8) -#define IOP331_VPDNXTP (volatile u8 *)IOP331_REG_ADDR(0x000001B9) -#define IOP331_VPDAR (volatile u16 *)IOP331_REG_ADDR(0x000001BA) -#define IOP331_VPDDR (volatile u32 *)IOP331_REG_ADDR(0x000001BC) -#define IOP331_PMCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001C0) -#define IOP331_PMNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001C1) -#define IOP331_APMCR (volatile u16 *)IOP331_REG_ADDR(0x000001C2) -#define IOP331_APMCSR (volatile u16 *)IOP331_REG_ADDR(0x000001C4) -/* Reserved 0x000001C6 through 0x000001CF */ -#define IOP331_MSICAPID (volatile u8 *)IOP331_REG_ADDR(0x000001D0) -#define IOP331_MSINXTP (volatile u8 *)IOP331_REG_ADDR(0x000001D1) -#define IOP331_MSIMCR (volatile u16 *)IOP331_REG_ADDR(0x000001D2) -#define IOP331_MSIMAR (volatile u32 *)IOP331_REG_ADDR(0x000001D4) -#define IOP331_MSIMUAR (volatile u32 *)IOP331_REG_ADDR(0x000001D8) -#define IOP331_MSIMDR (volatile u32 *)IOP331_REG_ADDR(0x000001DC) -#define IOP331_PCIXCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001E0) -#define IOP331_PCIXNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001E1) -#define IOP331_PCIXCMD (volatile u16 *)IOP331_REG_ADDR(0x000001E2) -#define IOP331_PCIXSR (volatile u32 *)IOP331_REG_ADDR(0x000001E4) -#define IOP331_PCIIRSR (volatile u32 *)IOP331_REG_ADDR(0x000001EC) /* Messaging Unit 0x00000300 through 0x000003FF */ @@ -332,6 +238,8 @@ /* Reserved 0x0000178c through 0x000019ff */ +#include + #ifndef __ASSEMBLY__ extern void iop331_init_irq(void); diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h index 5e47164934c..de208d2cca4 100644 --- a/include/asm-arm/arch-iop33x/memory.h +++ b/include/asm-arm/arch-iop33x/memory.h @@ -19,8 +19,8 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2))) +#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) +#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) #endif diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h index 43cc787ea62..8270ad9f86c 100644 --- a/include/asm-arm/arch-iop33x/system.h +++ b/include/asm-arm/arch-iop33x/system.h @@ -16,7 +16,7 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - *IOP331_PCSR = 0x30; + *IOP3XX_PCSR = 0x30; if ( 1 && mode == 's') { /* Jump into ROM at address 0 */ diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index cb41defad4a..24621c49a0c 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h @@ -56,14 +56,6 @@ extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); extern void iop3xx_pci_preinit(void); -extern int iop321_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *); -extern void iop321_init(void); - -extern int iop331_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *); -extern void iop331_init(void); - extern int dc21285_setup(int nr, struct pci_sys_data *); extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); extern void dc21285_preinit(void); -- cgit v1.2.3 From 48388b2a56ae5e0f1c422e84d536f31729469b17 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:18:16 +0100 Subject: [ARM] 3822/1: iop3xx: rewrite time handling Merge and rewrite the iop32x/iop33x time code to do lost jiffy tracking properly, and put the result in plat-iop/time.c. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop321.h | 6 ++++++ include/asm-arm/arch-iop33x/iop331.h | 6 ++++++ include/asm-arm/hardware/iop3xx.h | 20 ++++++++++++++++++++ 3 files changed, 32 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index e3c85a05e73..bd96b8d55a7 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -233,6 +233,12 @@ /* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ +/* + * Peripherals that are shared between the iop32x and iop33x but + * located at different addresses. + */ +#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) + #include diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index e85e1a2e1a8..b301ef8f7f3 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -238,6 +238,12 @@ /* Reserved 0x0000178c through 0x000019ff */ +/* + * Peripherals that are shared between the iop32x and iop33x but + * located at different addresses. + */ +#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg)) + #include diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index d488ced2e12..b21ea41b149 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -81,6 +81,24 @@ #define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) #define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) +/* Timers */ +#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) +#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) +#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008) +#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c) +#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010) +#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014) +#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018) +#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c) +#define IOP3XX_TMR_TC 0x01 +#define IOP3XX_TMR_EN 0x02 +#define IOP3XX_TMR_RELOAD 0x04 +#define IOP3XX_TMR_PRIVILEGED 0x09 +#define IOP3XX_TMR_RATIO_1_1 0x00 +#define IOP3XX_TMR_RATIO_4_1 0x10 +#define IOP3XX_TMR_RATIO_8_1 0x20 +#define IOP3XX_TMR_RATIO_16_1 0x30 + /* I2C bus interface unit */ #define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) #define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) @@ -109,6 +127,8 @@ #ifndef __ASSEMBLY__ void iop3xx_map_io(void); +void iop3xx_init_time(unsigned long); +unsigned long iop3xx_gettimeoffset(void); extern struct platform_device iop3xx_i2c0_device; extern struct platform_device iop3xx_i2c1_device; -- cgit v1.2.3 From 863753a81e4f863015be34900dc2ba3637622f34 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:19:02 +0100 Subject: [ARM] 3823/1: iop3xx: switch iop32x/iop33x over to shared time code Switch the iop32x and iop33x code over to the common time implementation, and remove the (nearly identical) iop32x and iop33x time implementations. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop321.h | 21 --------------------- include/asm-arm/arch-iop32x/timex.h | 2 +- include/asm-arm/arch-iop33x/iop331.h | 21 --------------------- include/asm-arm/arch-iop33x/timex.h | 2 +- 4 files changed, 2 insertions(+), 44 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index bd96b8d55a7..34fe07f0a44 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -151,10 +151,6 @@ #define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC) /* Timers */ - -#define IOP321_TU_TMR0 (volatile u32 *)IOP321_REG_ADDR(0x000007E0) -#define IOP321_TU_TMR1 (volatile u32 *)IOP321_REG_ADDR(0x000007E4) - #ifdef CONFIG_ARCH_IQ80321 #define IOP321_TICK_RATE 200000000 /* 200 MHz clock */ #elif defined(CONFIG_ARCH_IQ31244) @@ -166,23 +162,6 @@ #define IOP321_TICK_RATE 200000000 /* 33.333333 Mhz crystal */ #endif -#define IOP321_TMR_TC 0x01 -#define IOP321_TMR_EN 0x02 -#define IOP321_TMR_RELOAD 0x04 -#define IOP321_TMR_PRIVILEGED 0x09 - -#define IOP321_TMR_RATIO_1_1 0x00 -#define IOP321_TMR_RATIO_4_1 0x10 -#define IOP321_TMR_RATIO_8_1 0x20 -#define IOP321_TMR_RATIO_16_1 0x30 - -#define IOP321_TU_TCR0 (volatile u32 *)IOP321_REG_ADDR(0x000007E8) -#define IOP321_TU_TCR1 (volatile u32 *)IOP321_REG_ADDR(0x000007EC) -#define IOP321_TU_TRR0 (volatile u32 *)IOP321_REG_ADDR(0x000007F0) -#define IOP321_TU_TRR1 (volatile u32 *)IOP321_REG_ADDR(0x000007F4) -#define IOP321_TU_TISR (volatile u32 *)IOP321_REG_ADDR(0x000007F8) -#define IOP321_TU_WDTCR (volatile u32 *)IOP321_REG_ADDR(0x000007FC) - /* Application accelerator unit 0x00000800 - 0x000008FF */ #define IOP321_AAU_ACR (volatile u32 *)IOP321_REG_ADDR(0x00000800) #define IOP321_AAU_ASR (volatile u32 *)IOP321_REG_ADDR(0x00000804) diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h index 08badde2e82..328f37282c3 100644 --- a/include/asm-arm/arch-iop32x/timex.h +++ b/include/asm-arm/arch-iop32x/timex.h @@ -5,4 +5,4 @@ */ #include -#define CLOCK_TICK_RATE IOP321_TICK_RATE +#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index b301ef8f7f3..4ebcd7197c8 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -137,27 +137,6 @@ /* Timers */ - -#define IOP331_TU_TMR0 (volatile u32 *)IOP331_REG_ADDR(0x000007D0) -#define IOP331_TU_TMR1 (volatile u32 *)IOP331_REG_ADDR(0x000007D4) - -#define IOP331_TMR_TC 0x01 -#define IOP331_TMR_EN 0x02 -#define IOP331_TMR_RELOAD 0x04 -#define IOP331_TMR_PRIVILEGED 0x09 - -#define IOP331_TMR_RATIO_1_1 0x00 -#define IOP331_TMR_RATIO_4_1 0x10 -#define IOP331_TMR_RATIO_8_1 0x20 -#define IOP331_TMR_RATIO_16_1 0x30 - -#define IOP331_TU_TCR0 (volatile u32 *)IOP331_REG_ADDR(0x000007D8) -#define IOP331_TU_TCR1 (volatile u32 *)IOP331_REG_ADDR(0x000007DC) -#define IOP331_TU_TRR0 (volatile u32 *)IOP331_REG_ADDR(0x000007E0) -#define IOP331_TU_TRR1 (volatile u32 *)IOP331_REG_ADDR(0x000007E4) -#define IOP331_TU_TISR (volatile u32 *)IOP331_REG_ADDR(0x000007E8) -#define IOP331_TU_WDTCR (volatile u32 *)IOP331_REG_ADDR(0x000007EC) - #if defined(CONFIG_ARCH_IOP33X) #define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */ #endif diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h index cc8085fa2a1..8994322a09f 100644 --- a/include/asm-arm/arch-iop33x/timex.h +++ b/include/asm-arm/arch-iop33x/timex.h @@ -5,4 +5,4 @@ */ #include -#define CLOCK_TICK_RATE IOP331_TICK_RATE +#define CLOCK_TICK_RATE (100 * HZ) -- cgit v1.2.3 From 0b29de4a6ac0936f56b974a3c19bd9c24ac5b5d7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:20:55 +0100 Subject: [ARM] 3824/1: iop3xx: add cp6 enable/disable macros Add macros to enable and disable access to CP6. On the iop3xx, enabling CP6 access unfortunately also enables access to that coprocessor from unprivileged code, so we need these macros to enable and disable access to the coprocessor whenever we need to access it. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/hardware/iop3xx.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index b21ea41b149..98b7cbc405e 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -132,6 +132,34 @@ unsigned long iop3xx_gettimeoffset(void); extern struct platform_device iop3xx_i2c0_device; extern struct platform_device iop3xx_i2c1_device; + +extern inline void iop3xx_cp6_enable(void) +{ + u32 temp; + + asm volatile ( + "mrc p15, 0, %0, c15, c1, 0\n\t" + "orr %0, %0, #(1 << 6)\n\t" + "mcr p15, 0, %0, c15, c1, 0\n\t" + "mrc p15, 0, %0, c15, c1, 0\n\t" + "mov %0, %0\n\t" + "sub pc, pc, #4\n\t" + : "=r" (temp) ); +} + +extern inline void iop3xx_cp6_disable(void) +{ + u32 temp; + + asm volatile ( + "mrc p15, 0, %0, c15, c1, 0\n\t" + "bic %0, %0, #(1 << 6)\n\t" + "mcr p15, 0, %0, c15, c1, 0\n\t" + "mrc p15, 0, %0, c15, c1, 0\n\t" + "mov %0, %0\n\t" + "sub pc, pc, #4\n\t" + : "=r" (temp) ); +} #endif -- cgit v1.2.3 From 38ce73ebd74a9a1738b73619557f2397c59ba628 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:21:38 +0100 Subject: [ARM] 3825/1: iop3xx: use cp6 enable/disable macros Add CP6 enable/disable sequences to the timekeeping code and the IRQ code. As a result, we can't depend on CP6 access being enabled when we enter get_irqnr_and_base anymore, so switch the latter over to using memory-mapped accesses for now. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/entry-macro.S | 3 ++- include/asm-arm/arch-iop33x/entry-macro.S | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S index 52d9435c6a3..00038c17317 100644 --- a/include/asm-arm/arch-iop32x/entry-macro.S +++ b/include/asm-arm/arch-iop32x/entry-macro.S @@ -17,7 +17,8 @@ */ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \irqnr, #0 - mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC + ldr \base, =IOP3XX_REG_ADDR(0x07D8) + ldr \irqstat, [\base] @ Read IINTSRC cmp \irqstat, #0 beq 1001f clz \irqnr, \irqstat diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S index 980ec9b1ac8..57f6ea0069e 100644 --- a/include/asm-arm/arch-iop33x/entry-macro.S +++ b/include/asm-arm/arch-iop33x/entry-macro.S @@ -17,10 +17,11 @@ */ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \irqnr, #0 - mrc p6, 0, \irqstat, c4, c0, 0 @ Read IINTSRC0 + ldr \base, =IOP3XX_REG_ADDR(0x7A0) + ldr \irqstat, [\base] @ Read IINTSRC0 cmp \irqstat, #0 bne 1002f - mrc p6, 0, \irqstat, c5, c0, 0 @ Read IINTSRC1 + ldr \irqstat, [\base, #4] @ Read IINTSRC1 cmp \irqstat, #0 beq 1001f clz \irqnr, \irqstat -- cgit v1.2.3 From 610300e8f4f833904096ca1233ffd9dbd73fb11f Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:22:24 +0100 Subject: [ARM] 3826/1: iop3xx: remove IOP3??_IRQ_OFS irq offset Get rid of the unused IOP3??_IRQ_OFS irq offset define, start IRQ numbering from zero. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/entry-macro.S | 1 - include/asm-arm/arch-iop32x/irqs.h | 68 ++++++++---------- include/asm-arm/arch-iop33x/entry-macro.S | 1 - include/asm-arm/arch-iop33x/irqs.h | 110 +++++++++++------------------- 4 files changed, 68 insertions(+), 112 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S index 00038c17317..c5ec1e23cbe 100644 --- a/include/asm-arm/arch-iop32x/entry-macro.S +++ b/include/asm-arm/arch-iop32x/entry-macro.S @@ -24,6 +24,5 @@ clz \irqnr, \irqstat mov \base, #31 subs \irqnr,\base,\irqnr - add \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT 1001: .endm diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h index 4b0c82711f9..9fefcf3372b 100644 --- a/include/asm-arm/arch-iop32x/irqs.h +++ b/include/asm-arm/arch-iop32x/irqs.h @@ -15,46 +15,36 @@ /* * IOP80321 chipset interrupts */ -#define IOP321_IRQ_OFS 0 -#define IOP321_IRQ(x) (IOP321_IRQ_OFS + (x)) +#define IRQ_IOP321_DMA0_EOT 0 +#define IRQ_IOP321_DMA0_EOC 1 +#define IRQ_IOP321_DMA1_EOT 2 +#define IRQ_IOP321_DMA1_EOC 3 +#define IRQ_IOP321_AA_EOT 6 +#define IRQ_IOP321_AA_EOC 7 +#define IRQ_IOP321_CORE_PMON 8 +#define IRQ_IOP321_TIMER0 9 +#define IRQ_IOP321_TIMER1 10 +#define IRQ_IOP321_I2C_0 11 +#define IRQ_IOP321_I2C_1 12 +#define IRQ_IOP321_MESSAGING 13 +#define IRQ_IOP321_ATU_BIST 14 +#define IRQ_IOP321_PERFMON 15 +#define IRQ_IOP321_CORE_PMU 16 +#define IRQ_IOP321_BIU_ERR 17 +#define IRQ_IOP321_ATU_ERR 18 +#define IRQ_IOP321_MCU_ERR 19 +#define IRQ_IOP321_DMA0_ERR 20 +#define IRQ_IOP321_DMA1_ERR 21 +#define IRQ_IOP321_AA_ERR 23 +#define IRQ_IOP321_MSG_ERR 24 +#define IRQ_IOP321_SSP 25 +#define IRQ_IOP321_XINT0 27 +#define IRQ_IOP321_XINT1 28 +#define IRQ_IOP321_XINT2 29 +#define IRQ_IOP321_XINT3 30 +#define IRQ_IOP321_HPI 31 -/* - * On IRQ or FIQ register - */ -#define IRQ_IOP321_DMA0_EOT IOP321_IRQ(0) -#define IRQ_IOP321_DMA0_EOC IOP321_IRQ(1) -#define IRQ_IOP321_DMA1_EOT IOP321_IRQ(2) -#define IRQ_IOP321_DMA1_EOC IOP321_IRQ(3) -#define IRQ_IOP321_RSVD_4 IOP321_IRQ(4) -#define IRQ_IOP321_RSVD_5 IOP321_IRQ(5) -#define IRQ_IOP321_AA_EOT IOP321_IRQ(6) -#define IRQ_IOP321_AA_EOC IOP321_IRQ(7) -#define IRQ_IOP321_CORE_PMON IOP321_IRQ(8) -#define IRQ_IOP321_TIMER0 IOP321_IRQ(9) -#define IRQ_IOP321_TIMER1 IOP321_IRQ(10) -#define IRQ_IOP321_I2C_0 IOP321_IRQ(11) -#define IRQ_IOP321_I2C_1 IOP321_IRQ(12) -#define IRQ_IOP321_MESSAGING IOP321_IRQ(13) -#define IRQ_IOP321_ATU_BIST IOP321_IRQ(14) -#define IRQ_IOP321_PERFMON IOP321_IRQ(15) -#define IRQ_IOP321_CORE_PMU IOP321_IRQ(16) -#define IRQ_IOP321_BIU_ERR IOP321_IRQ(17) -#define IRQ_IOP321_ATU_ERR IOP321_IRQ(18) -#define IRQ_IOP321_MCU_ERR IOP321_IRQ(19) -#define IRQ_IOP321_DMA0_ERR IOP321_IRQ(20) -#define IRQ_IOP321_DMA1_ERR IOP321_IRQ(21) -#define IRQ_IOP321_RSVD_22 IOP321_IRQ(22) -#define IRQ_IOP321_AA_ERR IOP321_IRQ(23) -#define IRQ_IOP321_MSG_ERR IOP321_IRQ(24) -#define IRQ_IOP321_SSP IOP321_IRQ(25) -#define IRQ_IOP321_RSVD_26 IOP321_IRQ(26) -#define IRQ_IOP321_XINT0 IOP321_IRQ(27) -#define IRQ_IOP321_XINT1 IOP321_IRQ(28) -#define IRQ_IOP321_XINT2 IOP321_IRQ(29) -#define IRQ_IOP321_XINT3 IOP321_IRQ(30) -#define IRQ_IOP321_HPI IOP321_IRQ(31) - -#define NR_IRQS (IOP321_IRQ(31) + 1) +#define NR_IRQS 32 /* diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S index 57f6ea0069e..425aa7aafa0 100644 --- a/include/asm-arm/arch-iop33x/entry-macro.S +++ b/include/asm-arm/arch-iop33x/entry-macro.S @@ -30,6 +30,5 @@ b 1001f 1002: clz \irqnr, \irqstat rsbs \irqnr,\irqnr,#31 @ recommend by RMK - add \irqnr,\irqnr,#IRQ_IOP331_DMA0_EOT 1001: .endm diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h index 45856a12815..2e3ade3b5ff 100644 --- a/include/asm-arm/arch-iop33x/irqs.h +++ b/include/asm-arm/arch-iop33x/irqs.h @@ -15,78 +15,46 @@ /* * IOP80331 chipset interrupts */ -#define IOP331_IRQ_OFS 0 -#define IOP331_IRQ(x) (IOP331_IRQ_OFS + (x)) +#define IRQ_IOP331_DMA0_EOT 0 +#define IRQ_IOP331_DMA0_EOC 1 +#define IRQ_IOP331_DMA1_EOT 2 +#define IRQ_IOP331_DMA1_EOC 3 +#define IRQ_IOP331_AA_EOT 6 +#define IRQ_IOP331_AA_EOC 7 +#define IRQ_IOP331_TIMER0 8 +#define IRQ_IOP331_TIMER1 9 +#define IRQ_IOP331_I2C_0 10 +#define IRQ_IOP331_I2C_1 11 +#define IRQ_IOP331_MSG 12 +#define IRQ_IOP331_MSGIBQ 13 +#define IRQ_IOP331_ATU_BIST 14 +#define IRQ_IOP331_PERFMON 15 +#define IRQ_IOP331_CORE_PMU 16 +#define IRQ_IOP331_XINT0 24 +#define IRQ_IOP331_XINT1 25 +#define IRQ_IOP331_XINT2 26 +#define IRQ_IOP331_XINT3 27 +#define IRQ_IOP331_XINT8 32 +#define IRQ_IOP331_XINT9 33 +#define IRQ_IOP331_XINT10 34 +#define IRQ_IOP331_XINT11 35 +#define IRQ_IOP331_XINT12 36 +#define IRQ_IOP331_XINT13 37 +#define IRQ_IOP331_XINT14 38 +#define IRQ_IOP331_XINT15 39 +#define IRQ_IOP331_UART0 51 +#define IRQ_IOP331_UART1 52 +#define IRQ_IOP331_PBIE 53 +#define IRQ_IOP331_ATU_CRW 54 +#define IRQ_IOP331_ATU_ERR 55 +#define IRQ_IOP331_MCU_ERR 56 +#define IRQ_IOP331_DMA0_ERR 57 +#define IRQ_IOP331_DMA1_ERR 58 +#define IRQ_IOP331_AA_ERR 60 +#define IRQ_IOP331_MSG_ERR 62 +#define IRQ_IOP331_HPI 63 -/* - * On IRQ or FIQ register - */ -#define IRQ_IOP331_DMA0_EOT IOP331_IRQ(0) -#define IRQ_IOP331_DMA0_EOC IOP331_IRQ(1) -#define IRQ_IOP331_DMA1_EOT IOP331_IRQ(2) -#define IRQ_IOP331_DMA1_EOC IOP331_IRQ(3) -#define IRQ_IOP331_RSVD_4 IOP331_IRQ(4) -#define IRQ_IOP331_RSVD_5 IOP331_IRQ(5) -#define IRQ_IOP331_AA_EOT IOP331_IRQ(6) -#define IRQ_IOP331_AA_EOC IOP331_IRQ(7) -#define IRQ_IOP331_TIMER0 IOP331_IRQ(8) -#define IRQ_IOP331_TIMER1 IOP331_IRQ(9) -#define IRQ_IOP331_I2C_0 IOP331_IRQ(10) -#define IRQ_IOP331_I2C_1 IOP331_IRQ(11) -#define IRQ_IOP331_MSG IOP331_IRQ(12) -#define IRQ_IOP331_MSGIBQ IOP331_IRQ(13) -#define IRQ_IOP331_ATU_BIST IOP331_IRQ(14) -#define IRQ_IOP331_PERFMON IOP331_IRQ(15) -#define IRQ_IOP331_CORE_PMU IOP331_IRQ(16) -#define IRQ_IOP331_RSVD_17 IOP331_IRQ(17) -#define IRQ_IOP331_RSVD_18 IOP331_IRQ(18) -#define IRQ_IOP331_RSVD_19 IOP331_IRQ(19) -#define IRQ_IOP331_RSVD_20 IOP331_IRQ(20) -#define IRQ_IOP331_RSVD_21 IOP331_IRQ(21) -#define IRQ_IOP331_RSVD_22 IOP331_IRQ(22) -#define IRQ_IOP331_RSVD_23 IOP331_IRQ(23) -#define IRQ_IOP331_XINT0 IOP331_IRQ(24) -#define IRQ_IOP331_XINT1 IOP331_IRQ(25) -#define IRQ_IOP331_XINT2 IOP331_IRQ(26) -#define IRQ_IOP331_XINT3 IOP331_IRQ(27) -#define IRQ_IOP331_RSVD_28 IOP331_IRQ(28) -#define IRQ_IOP331_RSVD_29 IOP331_IRQ(29) -#define IRQ_IOP331_RSVD_30 IOP331_IRQ(30) -#define IRQ_IOP331_RSVD_31 IOP331_IRQ(31) -#define IRQ_IOP331_XINT8 IOP331_IRQ(32) // 0 -#define IRQ_IOP331_XINT9 IOP331_IRQ(33) // 1 -#define IRQ_IOP331_XINT10 IOP331_IRQ(34) // 2 -#define IRQ_IOP331_XINT11 IOP331_IRQ(35) // 3 -#define IRQ_IOP331_XINT12 IOP331_IRQ(36) // 4 -#define IRQ_IOP331_XINT13 IOP331_IRQ(37) // 5 -#define IRQ_IOP331_XINT14 IOP331_IRQ(38) // 6 -#define IRQ_IOP331_XINT15 IOP331_IRQ(39) // 7 -#define IRQ_IOP331_RSVD_40 IOP331_IRQ(40) // 8 -#define IRQ_IOP331_RSVD_41 IOP331_IRQ(41) // 9 -#define IRQ_IOP331_RSVD_42 IOP331_IRQ(42) // 10 -#define IRQ_IOP331_RSVD_43 IOP331_IRQ(43) // 11 -#define IRQ_IOP331_RSVD_44 IOP331_IRQ(44) // 12 -#define IRQ_IOP331_RSVD_45 IOP331_IRQ(45) // 13 -#define IRQ_IOP331_RSVD_46 IOP331_IRQ(46) // 14 -#define IRQ_IOP331_RSVD_47 IOP331_IRQ(47) // 15 -#define IRQ_IOP331_RSVD_48 IOP331_IRQ(48) // 16 -#define IRQ_IOP331_RSVD_49 IOP331_IRQ(49) // 17 -#define IRQ_IOP331_RSVD_50 IOP331_IRQ(50) // 18 -#define IRQ_IOP331_UART0 IOP331_IRQ(51) // 19 -#define IRQ_IOP331_UART1 IOP331_IRQ(52) // 20 -#define IRQ_IOP331_PBIE IOP331_IRQ(53) // 21 -#define IRQ_IOP331_ATU_CRW IOP331_IRQ(54) // 22 -#define IRQ_IOP331_ATU_ERR IOP331_IRQ(55) // 23 -#define IRQ_IOP331_MCU_ERR IOP331_IRQ(56) // 24 -#define IRQ_IOP331_DMA0_ERR IOP331_IRQ(57) // 25 -#define IRQ_IOP331_DMA1_ERR IOP331_IRQ(58) // 26 -#define IRQ_IOP331_RSVD_59 IOP331_IRQ(59) // 27 -#define IRQ_IOP331_AA_ERR IOP331_IRQ(60) // 28 -#define IRQ_IOP331_RSVD_61 IOP331_IRQ(61) // 29 -#define IRQ_IOP331_MSG_ERR IOP331_IRQ(62) // 30 -#define IRQ_IOP331_HPI IOP331_IRQ(63) // 31 - -#define NR_IRQS (IOP331_IRQ(63) + 1) +#define NR_IRQS 64 /* -- cgit v1.2.3 From 72edd84a6b2db1a21d1ed07929cae560e276a0a6 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:23:07 +0100 Subject: [ARM] 3827/1: iop3xx: add common gpio module Implement the gpio_line_{config,get,set} API for iop3xx. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop321.h | 1 + include/asm-arm/arch-iop33x/iop331.h | 1 + include/asm-arm/hardware/iop3xx.h | 21 +++++++++++++++++++++ 3 files changed, 23 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 34fe07f0a44..1e57e009476 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -216,6 +216,7 @@ * Peripherals that are shared between the iop32x and iop33x but * located at different addresses. */ +#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg)) #define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) #include diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index 4ebcd7197c8..d12a95aa967 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -221,6 +221,7 @@ * Peripherals that are shared between the iop32x and iop33x but * located at different addresses. */ +#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg)) #define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg)) #include diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index 98b7cbc405e..f3c61d041fc 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -15,6 +15,22 @@ #ifndef __IOP3XX_H #define __IOP3XX_H +/* + * IOP3XX GPIO handling + */ +#define GPIO_IN 0 +#define GPIO_OUT 1 +#define GPIO_LOW 0 +#define GPIO_HIGH 1 +#define IOP3XX_GPIO_LINE(x) (x) + +#ifndef __ASSEMBLY__ +extern void gpio_line_config(int line, int direction); +extern int gpio_line_get(int line); +extern void gpio_line_set(int line, int value); +#endif + + /* * IOP3XX processor registers */ @@ -81,6 +97,11 @@ #define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) #define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) +/* General Purpose I/O */ +#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0004) +#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0008) +#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x000c) + /* Timers */ #define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) #define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) -- cgit v1.2.3 From 7412b10f7967ef4210ed6f793004d23642dc5140 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:24:10 +0100 Subject: [ARM] 3829/1: iop3xx: optimise irq entry macros Squeeze three instructions out of the iop32x irq demuxer, and nine out of the iop33x irq demuxer by using the hardware vector generator. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/entry-macro.S | 10 +++------- include/asm-arm/arch-iop33x/entry-macro.S | 22 +++++----------------- 2 files changed, 8 insertions(+), 24 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S index c5ec1e23cbe..3497fef0b89 100644 --- a/include/asm-arm/arch-iop32x/entry-macro.S +++ b/include/asm-arm/arch-iop32x/entry-macro.S @@ -16,13 +16,9 @@ * Note: only deal with normal interrupts, not FIQ */ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 ldr \base, =IOP3XX_REG_ADDR(0x07D8) ldr \irqstat, [\base] @ Read IINTSRC - cmp \irqstat, #0 - beq 1001f - clz \irqnr, \irqstat - mov \base, #31 - subs \irqnr,\base,\irqnr -1001: + cmp \irqstat, #0 + clzne \irqnr, \irqstat + rsbne \irqnr, \irqnr, #31 .endm diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S index 425aa7aafa0..4750e98e9b4 100644 --- a/include/asm-arm/arch-iop33x/entry-macro.S +++ b/include/asm-arm/arch-iop33x/entry-macro.S @@ -12,23 +12,11 @@ .macro disable_fiq .endm - /* - * Note: only deal with normal interrupts, not FIQ - */ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 - ldr \base, =IOP3XX_REG_ADDR(0x7A0) - ldr \irqstat, [\base] @ Read IINTSRC0 - cmp \irqstat, #0 - bne 1002f - ldr \irqstat, [\base, #4] @ Read IINTSRC1 + ldr \base, =IOP3XX_REG_ADDR(0x07C8) + ldr \irqstat, [\base] @ Read IINTVEC cmp \irqstat, #0 - beq 1001f - clz \irqnr, \irqstat - rsbs \irqnr,\irqnr,#31 @ recommend by RMK - add \irqnr,\irqnr,#IRQ_IOP331_XINT8 - b 1001f -1002: clz \irqnr, \irqstat - rsbs \irqnr,\irqnr,#31 @ recommend by RMK -1001: + ldreq \irqstat, [\base] @ erratum 63 workaround + adds \irqnr, \irqstat, #1 + movne \irqnr, \irqstat, lsr #2 .endm -- cgit v1.2.3 From c680b77efe4542830bb170e1cc40db1c47c569bc Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:24:52 +0100 Subject: [ARM] 3830/1: iop3xx: board support file cleanup Revamp the iop3xx board support: move the support code for each iop board type into its own file, start using platform serial and platform physmap flash devices, switch to a per-board time tick rate, and get rid of the ARCH_EP80219 and STEPD config options by doing the relevant checks at run time. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop321.h | 12 ----------- include/asm-arm/arch-iop32x/iq31244.h | 7 ------- include/asm-arm/arch-iop32x/iq80321.h | 7 ------- include/asm-arm/arch-iop32x/irqs.h | 38 ---------------------------------- include/asm-arm/arch-iop33x/hardware.h | 5 +++++ include/asm-arm/arch-iop33x/iop331.h | 10 --------- include/asm-arm/arch-iop33x/iq80331.h | 7 ------- include/asm-arm/arch-iop33x/iq80332.h | 7 ------- include/asm-arm/arch-iop33x/irqs.h | 38 ---------------------------------- 9 files changed, 5 insertions(+), 126 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 1e57e009476..8042946327e 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -150,18 +150,6 @@ #define IOP321_IINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007D8) #define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC) -/* Timers */ -#ifdef CONFIG_ARCH_IQ80321 -#define IOP321_TICK_RATE 200000000 /* 200 MHz clock */ -#elif defined(CONFIG_ARCH_IQ31244) -#define IOP321_TICK_RATE 198000000 /* 33.000 MHz crystal */ -#endif - -#ifdef CONFIG_ARCH_EP80219 -#undef IOP321_TICK_RATE -#define IOP321_TICK_RATE 200000000 /* 33.333333 Mhz crystal */ -#endif - /* Application accelerator unit 0x00000800 - 0x000008FF */ #define IOP321_AAU_ACR (volatile u32 *)IOP321_REG_ADDR(0x00000800) #define IOP321_AAU_ASR (volatile u32 *)IOP321_REG_ADDR(0x00000804) diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h index f490063d215..cf2d2343398 100644 --- a/include/asm-arm/arch-iop32x/iq31244.h +++ b/include/asm-arm/arch-iop32x/iq31244.h @@ -7,18 +7,11 @@ #ifndef _IQ31244_H_ #define _IQ31244_H_ -#define IQ31244_FLASHBASE 0xf0000000 /* Flash */ -#define IQ31244_FLASHSIZE 0x00800000 -#define IQ31244_FLASHWIDTH 2 - #define IQ31244_UART 0xfe800000 /* UART #1 */ #define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */ #define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ #define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ #define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */ -#ifndef __ASSEMBLY__ -extern void iq31244_map_io(void); -#endif #endif // _IQ31244_H_ diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h index 7015a605ab6..55d70f49b7f 100644 --- a/include/asm-arm/arch-iop32x/iq80321.h +++ b/include/asm-arm/arch-iop32x/iq80321.h @@ -7,18 +7,11 @@ #ifndef _IQ80321_H_ #define _IQ80321_H_ -#define IQ80321_FLASHBASE 0xf0000000 /* Flash */ -#define IQ80321_FLASHSIZE 0x00800000 -#define IQ80321_FLASHWIDTH 1 - #define IQ80321_UART 0xfe800000 /* UART #1 */ #define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */ #define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ #define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ #define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */ -#ifndef __ASSEMBLY__ -extern void iq80321_map_io(void); -#endif #endif // _IQ80321_H_ diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h index 9fefcf3372b..a48327ced92 100644 --- a/include/asm-arm/arch-iop32x/irqs.h +++ b/include/asm-arm/arch-iop32x/irqs.h @@ -47,42 +47,4 @@ #define NR_IRQS 32 -/* - * Interrupts available on the IQ80321 board - */ - -/* - * On board devices - */ -#define IRQ_IQ80321_I82544 IRQ_IOP321_XINT0 -#define IRQ_IQ80321_UART IRQ_IOP321_XINT1 - -/* - * PCI interrupts - */ -#define IRQ_IQ80321_INTA IRQ_IOP321_XINT0 -#define IRQ_IQ80321_INTB IRQ_IOP321_XINT1 -#define IRQ_IQ80321_INTC IRQ_IOP321_XINT2 -#define IRQ_IQ80321_INTD IRQ_IOP321_XINT3 - -/* - * Interrupts on the IQ31244 board - */ - -/* - * On board devices - */ -#define IRQ_IQ31244_UART IRQ_IOP321_XINT1 -#define IRQ_IQ31244_I82546 IRQ_IOP321_XINT0 -#define IRQ_IQ31244_SATA IRQ_IOP321_XINT2 -#define IRQ_IQ31244_PCIX_SLOT IRQ_IOP321_XINT3 - -/* - * PCI interrupts - */ -#define IRQ_IQ31244_INTA IRQ_IOP321_XINT0 -#define IRQ_IQ31244_INTB IRQ_IOP321_XINT1 -#define IRQ_IQ31244_INTC IRQ_IOP321_XINT2 -#define IRQ_IQ31244_INTD IRQ_IOP321_XINT3 - #endif // _IRQ_H_ diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h index 5e3cb32af02..3ebfdc6fea9 100644 --- a/include/asm-arm/arch-iop33x/hardware.h +++ b/include/asm-arm/arch-iop33x/hardware.h @@ -22,6 +22,11 @@ #define PCIBIOS_MIN_IO 0x00000000 #define PCIBIOS_MIN_MEM 0x00000000 +#ifndef __ASSEMBLY__ +extern struct platform_device iop33x_uart0_device; +extern struct platform_device iop33x_uart1_device; +#endif + /* * Generic chipset bits diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index d12a95aa967..a21872abd87 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -136,16 +136,6 @@ #define IOP331_FINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007CC) -/* Timers */ -#if defined(CONFIG_ARCH_IOP33X) -#define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */ -#endif - -#if defined(CONFIG_IOP331_STEPD) || defined(CONFIG_ARCH_IQ80333) -#undef IOP331_TICK_RATE -#define IOP331_TICK_RATE 333000000 /* 333 Mhz IB clock */ -#endif - /* Application accelerator unit 0x00000800 - 0x000008FF */ #define IOP331_AAU_ACR (volatile u32 *)IOP331_REG_ADDR(0x00000800) #define IOP331_AAU_ASR (volatile u32 *)IOP331_REG_ADDR(0x00000804) diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h index bda7ab6d55c..186762bf894 100644 --- a/include/asm-arm/arch-iop33x/iq80331.h +++ b/include/asm-arm/arch-iop33x/iq80331.h @@ -7,17 +7,10 @@ #ifndef _IQ80331_H_ #define _IQ80331_H_ -#define IQ80331_FLASHBASE 0xc0000000 /* Flash */ -#define IQ80331_FLASHSIZE 0x00800000 -#define IQ80331_FLASHWIDTH 1 - #define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */ #define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ #define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */ #define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */ -#ifndef __ASSEMBLY__ -extern void iq80331_map_io(void); -#endif #endif // _IQ80331_H_ diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h index f728e04378a..2a5d4ee01df 100644 --- a/include/asm-arm/arch-iop33x/iq80332.h +++ b/include/asm-arm/arch-iop33x/iq80332.h @@ -7,17 +7,10 @@ #ifndef _IQ80332_H_ #define _IQ80332_H_ -#define IQ80332_FLASHBASE 0xc0000000 /* Flash */ -#define IQ80332_FLASHSIZE 0x00800000 -#define IQ80332_FLASHWIDTH 1 - #define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */ #define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ #define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */ #define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */ -#ifndef __ASSEMBLY__ -extern void iq80332_map_io(void); -#endif #endif // _IQ80332_H_ diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h index 2e3ade3b5ff..a875404a07f 100644 --- a/include/asm-arm/arch-iop33x/irqs.h +++ b/include/asm-arm/arch-iop33x/irqs.h @@ -57,42 +57,4 @@ #define NR_IRQS 64 -/* - * Interrupts available on the IQ80331 board - */ - -/* - * On board devices - */ -#define IRQ_IQ80331_I82544 IRQ_IOP331_XINT0 -#define IRQ_IQ80331_UART0 IRQ_IOP331_UART0 -#define IRQ_IQ80331_UART1 IRQ_IOP331_UART1 - -/* - * PCI interrupts - */ -#define IRQ_IQ80331_INTA IRQ_IOP331_XINT0 -#define IRQ_IQ80331_INTB IRQ_IOP331_XINT1 -#define IRQ_IQ80331_INTC IRQ_IOP331_XINT2 -#define IRQ_IQ80331_INTD IRQ_IOP331_XINT3 - -/* - * Interrupts available on the IQ80332 board - */ - -/* - * On board devices - */ -#define IRQ_IQ80332_I82544 IRQ_IOP331_XINT0 -#define IRQ_IQ80332_UART0 IRQ_IOP331_UART0 -#define IRQ_IQ80332_UART1 IRQ_IOP331_UART1 - -/* - * PCI interrupts - */ -#define IRQ_IQ80332_INTA IRQ_IOP331_XINT0 -#define IRQ_IQ80332_INTB IRQ_IOP331_XINT1 -#define IRQ_IQ80332_INTC IRQ_IOP331_XINT2 -#define IRQ_IQ80332_INTD IRQ_IOP331_XINT3 - #endif // _IRQ_H_ -- cgit v1.2.3 From 475549faa161f4e002225f2ef75fdd2a6d83d151 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:25:33 +0100 Subject: [ARM] 3831/1: iop3xx: factor out common register defines Factor out the register defines for a number of other peripherals common to the iop32x and iop33x. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop321.h | 132 ----------------------------------- include/asm-arm/arch-iop33x/iop331.h | 115 ------------------------------ include/asm-arm/hardware/iop3xx.h | 114 ++++++++++++++++++++++++++++++ 3 files changed, 114 insertions(+), 247 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 8042946327e..1757222a4ca 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -37,102 +37,13 @@ /* Messaging Unit 0x00000300 through 0x000003FF */ -/* Reserved 0x00000300 through 0x0000030c */ -#define IOP321_IMR0 (volatile u32 *)IOP321_REG_ADDR(0x00000310) -#define IOP321_IMR1 (volatile u32 *)IOP321_REG_ADDR(0x00000314) -#define IOP321_OMR0 (volatile u32 *)IOP321_REG_ADDR(0x00000318) -#define IOP321_OMR1 (volatile u32 *)IOP321_REG_ADDR(0x0000031C) -#define IOP321_IDR (volatile u32 *)IOP321_REG_ADDR(0x00000320) -#define IOP321_IISR (volatile u32 *)IOP321_REG_ADDR(0x00000324) -#define IOP321_IIMR (volatile u32 *)IOP321_REG_ADDR(0x00000328) -#define IOP321_ODR (volatile u32 *)IOP321_REG_ADDR(0x0000032C) -#define IOP321_OISR (volatile u32 *)IOP321_REG_ADDR(0x00000330) -#define IOP321_OIMR (volatile u32 *)IOP321_REG_ADDR(0x00000334) -/* Reserved 0x00000338 through 0x0000034F */ -#define IOP321_MUCR (volatile u32 *)IOP321_REG_ADDR(0x00000350) -#define IOP321_QBAR (volatile u32 *)IOP321_REG_ADDR(0x00000354) -/* Reserved 0x00000358 through 0x0000035C */ -#define IOP321_IFHPR (volatile u32 *)IOP321_REG_ADDR(0x00000360) -#define IOP321_IFTPR (volatile u32 *)IOP321_REG_ADDR(0x00000364) -#define IOP321_IPHPR (volatile u32 *)IOP321_REG_ADDR(0x00000368) -#define IOP321_IPTPR (volatile u32 *)IOP321_REG_ADDR(0x0000036C) -#define IOP321_OFHPR (volatile u32 *)IOP321_REG_ADDR(0x00000370) -#define IOP321_OFTPR (volatile u32 *)IOP321_REG_ADDR(0x00000374) -#define IOP321_OPHPR (volatile u32 *)IOP321_REG_ADDR(0x00000378) -#define IOP321_OPTPR (volatile u32 *)IOP321_REG_ADDR(0x0000037C) -#define IOP321_IAR (volatile u32 *)IOP321_REG_ADDR(0x00000380) - -#define IOP321_IIxR_MASK 0x7f /* masks all */ -#define IOP321_IIxR_IRI 0x40 /* RC Index Register Interrupt */ -#define IOP321_IIxR_OFQF 0x20 /* RC Output Free Q Full (ERROR) */ -#define IOP321_IIxR_ipq 0x10 /* RC Inbound Post Q (post) */ -#define IOP321_IIxR_ERRDI 0x08 /* RO Error Doorbell Interrupt */ -#define IOP321_IIxR_IDI 0x04 /* RO Inbound Doorbell Interrupt */ -#define IOP321_IIxR_IM1 0x02 /* RC Inbound Message 1 Interrupt */ -#define IOP321_IIxR_IM0 0x01 /* RC Inbound Message 0 Interrupt */ - -/* Reserved 0x00000384 through 0x000003FF */ - /* DMA Controller 0x00000400 through 0x000004FF */ -#define IOP321_DMA0_CCR (volatile u32 *)IOP321_REG_ADDR(0x00000400) -#define IOP321_DMA0_CSR (volatile u32 *)IOP321_REG_ADDR(0x00000404) -#define IOP321_DMA0_DAR (volatile u32 *)IOP321_REG_ADDR(0x0000040C) -#define IOP321_DMA0_NDAR (volatile u32 *)IOP321_REG_ADDR(0x00000410) -#define IOP321_DMA0_PADR (volatile u32 *)IOP321_REG_ADDR(0x00000414) -#define IOP321_DMA0_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000418) -#define IOP321_DMA0_LADR (volatile u32 *)IOP321_REG_ADDR(0X0000041C) -#define IOP321_DMA0_BCR (volatile u32 *)IOP321_REG_ADDR(0x00000420) -#define IOP321_DMA0_DCR (volatile u32 *)IOP321_REG_ADDR(0x00000424) -/* Reserved 0x00000428 through 0x0000043C */ -#define IOP321_DMA1_CCR (volatile u32 *)IOP321_REG_ADDR(0x00000440) -#define IOP321_DMA1_CSR (volatile u32 *)IOP321_REG_ADDR(0x00000444) -#define IOP321_DMA1_DAR (volatile u32 *)IOP321_REG_ADDR(0x0000044C) -#define IOP321_DMA1_NDAR (volatile u32 *)IOP321_REG_ADDR(0x00000450) -#define IOP321_DMA1_PADR (volatile u32 *)IOP321_REG_ADDR(0x00000454) -#define IOP321_DMA1_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000458) -#define IOP321_DMA1_LADR (volatile u32 *)IOP321_REG_ADDR(0x0000045C) -#define IOP321_DMA1_BCR (volatile u32 *)IOP321_REG_ADDR(0x00000460) -#define IOP321_DMA1_DCR (volatile u32 *)IOP321_REG_ADDR(0x00000464) -/* Reserved 0x00000468 through 0x000004FF */ /* Memory controller 0x00000500 through 0x0005FF */ /* Peripheral bus interface unit 0x00000680 through 0x0006FF */ -#define IOP321_PBCR (volatile u32 *)IOP321_REG_ADDR(0x00000680) -#define IOP321_PBISR (volatile u32 *)IOP321_REG_ADDR(0x00000684) -#define IOP321_PBBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000688) -#define IOP321_PBLR0 (volatile u32 *)IOP321_REG_ADDR(0x0000068C) -#define IOP321_PBBAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000690) -#define IOP321_PBLR1 (volatile u32 *)IOP321_REG_ADDR(0x00000694) -#define IOP321_PBBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000698) -#define IOP321_PBLR2 (volatile u32 *)IOP321_REG_ADDR(0x0000069C) -#define IOP321_PBBAR3 (volatile u32 *)IOP321_REG_ADDR(0x000006A0) -#define IOP321_PBLR3 (volatile u32 *)IOP321_REG_ADDR(0x000006A4) -#define IOP321_PBBAR4 (volatile u32 *)IOP321_REG_ADDR(0x000006A8) -#define IOP321_PBLR4 (volatile u32 *)IOP321_REG_ADDR(0x000006AC) -#define IOP321_PBBAR5 (volatile u32 *)IOP321_REG_ADDR(0x000006B0) -#define IOP321_PBLR5 (volatile u32 *)IOP321_REG_ADDR(0x000006B4) -#define IOP321_PBDSCR (volatile u32 *)IOP321_REG_ADDR(0x000006B8) -/* Reserved 0x000006BC */ -#define IOP321_PMBR0 (volatile u32 *)IOP321_REG_ADDR(0x000006C0) -/* Reserved 0x000006C4 through 0x000006DC */ -#define IOP321_PMBR1 (volatile u32 *)IOP321_REG_ADDR(0x000006E0) -#define IOP321_PMBR2 (volatile u32 *)IOP321_REG_ADDR(0x000006E4) - -#define IOP321_PBCR_EN 0x1 - -#define IOP321_PBISR_BOOR_ERR 0x1 /* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ -#define IOP321_GTMR (volatile u32 *)IOP321_REG_ADDR(0x00000700) -#define IOP321_ESR (volatile u32 *)IOP321_REG_ADDR(0x00000704) -#define IOP321_EMISR (volatile u32 *)IOP321_REG_ADDR(0x00000708) -/* reserved 0x00000070c */ -#define IOP321_GTSR (volatile u32 *)IOP321_REG_ADDR(0x00000710) -/* PERC0 DOESN'T EXIST - index from 1! */ -#define IOP321_PERCR0 (volatile u32 *)IOP321_REG_ADDR(0x00000710) - -#define IOP321_GTMR_NGCE 0x04 /* (Not) Global Counter Enable */ /* Internal arbitration unit 0x00000780 through 0x0007BF */ #define IOP321_IACR (volatile u32 *)IOP321_REG_ADDR(0x00000780) @@ -151,49 +62,6 @@ #define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC) /* Application accelerator unit 0x00000800 - 0x000008FF */ -#define IOP321_AAU_ACR (volatile u32 *)IOP321_REG_ADDR(0x00000800) -#define IOP321_AAU_ASR (volatile u32 *)IOP321_REG_ADDR(0x00000804) -#define IOP321_AAU_ADAR (volatile u32 *)IOP321_REG_ADDR(0x00000808) -#define IOP321_AAU_ANDAR (volatile u32 *)IOP321_REG_ADDR(0x0000080C) -#define IOP321_AAU_SAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000810) -#define IOP321_AAU_SAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000814) -#define IOP321_AAU_SAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000818) -#define IOP321_AAU_SAR4 (volatile u32 *)IOP321_REG_ADDR(0x0000081C) -#define IOP321_AAU_SAR5 (volatile u32 *)IOP321_REG_ADDR(0x0000082C) -#define IOP321_AAU_SAR6 (volatile u32 *)IOP321_REG_ADDR(0x00000830) -#define IOP321_AAU_SAR7 (volatile u32 *)IOP321_REG_ADDR(0x00000834) -#define IOP321_AAU_SAR8 (volatile u32 *)IOP321_REG_ADDR(0x00000838) -#define IOP321_AAU_SAR9 (volatile u32 *)IOP321_REG_ADDR(0x00000840) -#define IOP321_AAU_SAR10 (volatile u32 *)IOP321_REG_ADDR(0x00000844) -#define IOP321_AAU_SAR11 (volatile u32 *)IOP321_REG_ADDR(0x00000848) -#define IOP321_AAU_SAR12 (volatile u32 *)IOP321_REG_ADDR(0x0000084C) -#define IOP321_AAU_SAR13 (volatile u32 *)IOP321_REG_ADDR(0x00000850) -#define IOP321_AAU_SAR14 (volatile u32 *)IOP321_REG_ADDR(0x00000854) -#define IOP321_AAU_SAR15 (volatile u32 *)IOP321_REG_ADDR(0x00000858) -#define IOP321_AAU_SAR16 (volatile u32 *)IOP321_REG_ADDR(0x0000085C) -#define IOP321_AAU_SAR17 (volatile u32 *)IOP321_REG_ADDR(0x00000864) -#define IOP321_AAU_SAR18 (volatile u32 *)IOP321_REG_ADDR(0x00000868) -#define IOP321_AAU_SAR19 (volatile u32 *)IOP321_REG_ADDR(0x0000086C) -#define IOP321_AAU_SAR20 (volatile u32 *)IOP321_REG_ADDR(0x00000870) -#define IOP321_AAU_SAR21 (volatile u32 *)IOP321_REG_ADDR(0x00000874) -#define IOP321_AAU_SAR22 (volatile u32 *)IOP321_REG_ADDR(0x00000878) -#define IOP321_AAU_SAR23 (volatile u32 *)IOP321_REG_ADDR(0x0000087C) -#define IOP321_AAU_SAR24 (volatile u32 *)IOP321_REG_ADDR(0x00000880) -#define IOP321_AAU_SAR25 (volatile u32 *)IOP321_REG_ADDR(0x00000888) -#define IOP321_AAU_SAR26 (volatile u32 *)IOP321_REG_ADDR(0x0000088C) -#define IOP321_AAU_SAR27 (volatile u32 *)IOP321_REG_ADDR(0x00000890) -#define IOP321_AAU_SAR28 (volatile u32 *)IOP321_REG_ADDR(0x00000894) -#define IOP321_AAU_SAR29 (volatile u32 *)IOP321_REG_ADDR(0x00000898) -#define IOP321_AAU_SAR30 (volatile u32 *)IOP321_REG_ADDR(0x0000089C) -#define IOP321_AAU_SAR31 (volatile u32 *)IOP321_REG_ADDR(0x000008A0) -#define IOP321_AAU_SAR32 (volatile u32 *)IOP321_REG_ADDR(0x000008A4) -#define IOP321_AAU_DAR (volatile u32 *)IOP321_REG_ADDR(0x00000820) -#define IOP321_AAU_ABCR (volatile u32 *)IOP321_REG_ADDR(0x00000824) -#define IOP321_AAU_ADCR (volatile u32 *)IOP321_REG_ADDR(0x00000828) -#define IOP321_AAU_EDCR0 (volatile u32 *)IOP321_REG_ADDR(0x0000083c) -#define IOP321_AAU_EDCR1 (volatile u32 *)IOP321_REG_ADDR(0x00000860) -#define IOP321_AAU_EDCR2 (volatile u32 *)IOP321_REG_ADDR(0x00000884) - /* SSP serial port unit 0x00001600 - 0x0000167F */ /* I2C bus interface unit 0x00001680 - 0x000016FF */ diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index a21872abd87..8c7ec583615 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -36,83 +36,11 @@ /* Messaging Unit 0x00000300 through 0x000003FF */ -/* Reserved 0x00000300 through 0x0000030c */ -#define IOP331_IMR0 (volatile u32 *)IOP331_REG_ADDR(0x00000310) -#define IOP331_IMR1 (volatile u32 *)IOP331_REG_ADDR(0x00000314) -#define IOP331_OMR0 (volatile u32 *)IOP331_REG_ADDR(0x00000318) -#define IOP331_OMR1 (volatile u32 *)IOP331_REG_ADDR(0x0000031C) -#define IOP331_IDR (volatile u32 *)IOP331_REG_ADDR(0x00000320) -#define IOP331_IISR (volatile u32 *)IOP331_REG_ADDR(0x00000324) -#define IOP331_IIMR (volatile u32 *)IOP331_REG_ADDR(0x00000328) -#define IOP331_ODR (volatile u32 *)IOP331_REG_ADDR(0x0000032C) -#define IOP331_OISR (volatile u32 *)IOP331_REG_ADDR(0x00000330) -#define IOP331_OIMR (volatile u32 *)IOP331_REG_ADDR(0x00000334) -/* Reserved 0x00000338 through 0x0000034F */ -#define IOP331_MUCR (volatile u32 *)IOP331_REG_ADDR(0x00000350) -#define IOP331_QBAR (volatile u32 *)IOP331_REG_ADDR(0x00000354) -/* Reserved 0x00000358 through 0x0000035C */ -#define IOP331_IFHPR (volatile u32 *)IOP331_REG_ADDR(0x00000360) -#define IOP331_IFTPR (volatile u32 *)IOP331_REG_ADDR(0x00000364) -#define IOP331_IPHPR (volatile u32 *)IOP331_REG_ADDR(0x00000368) -#define IOP331_IPTPR (volatile u32 *)IOP331_REG_ADDR(0x0000036C) -#define IOP331_OFHPR (volatile u32 *)IOP331_REG_ADDR(0x00000370) -#define IOP331_OFTPR (volatile u32 *)IOP331_REG_ADDR(0x00000374) -#define IOP331_OPHPR (volatile u32 *)IOP331_REG_ADDR(0x00000378) -#define IOP331_OPTPR (volatile u32 *)IOP331_REG_ADDR(0x0000037C) -#define IOP331_IAR (volatile u32 *)IOP331_REG_ADDR(0x00000380) -/* Reserved 0x00000384 through 0x000003FF */ - /* DMA Controller 0x00000400 through 0x000004FF */ -#define IOP331_DMA0_CCR (volatile u32 *)IOP331_REG_ADDR(0x00000400) -#define IOP331_DMA0_CSR (volatile u32 *)IOP331_REG_ADDR(0x00000404) -#define IOP331_DMA0_DAR (volatile u32 *)IOP331_REG_ADDR(0x0000040C) -#define IOP331_DMA0_NDAR (volatile u32 *)IOP331_REG_ADDR(0x00000410) -#define IOP331_DMA0_PADR (volatile u32 *)IOP331_REG_ADDR(0x00000414) -#define IOP331_DMA0_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000418) -#define IOP331_DMA0_LADR (volatile u32 *)IOP331_REG_ADDR(0X0000041C) -#define IOP331_DMA0_BCR (volatile u32 *)IOP331_REG_ADDR(0x00000420) -#define IOP331_DMA0_DCR (volatile u32 *)IOP331_REG_ADDR(0x00000424) -/* Reserved 0x00000428 through 0x0000043C */ -#define IOP331_DMA1_CCR (volatile u32 *)IOP331_REG_ADDR(0x00000440) -#define IOP331_DMA1_CSR (volatile u32 *)IOP331_REG_ADDR(0x00000444) -#define IOP331_DMA1_DAR (volatile u32 *)IOP331_REG_ADDR(0x0000044C) -#define IOP331_DMA1_NDAR (volatile u32 *)IOP331_REG_ADDR(0x00000450) -#define IOP331_DMA1_PADR (volatile u32 *)IOP331_REG_ADDR(0x00000454) -#define IOP331_DMA1_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000458) -#define IOP331_DMA1_LADR (volatile u32 *)IOP331_REG_ADDR(0x0000045C) -#define IOP331_DMA1_BCR (volatile u32 *)IOP331_REG_ADDR(0x00000460) -#define IOP331_DMA1_DCR (volatile u32 *)IOP331_REG_ADDR(0x00000464) -/* Reserved 0x00000468 through 0x000004FF */ /* Memory controller 0x00000500 through 0x0005FF */ /* Peripheral bus interface unit 0x00000680 through 0x0006FF */ -#define IOP331_PBCR (volatile u32 *)IOP331_REG_ADDR(0x00000680) -#define IOP331_PBISR (volatile u32 *)IOP331_REG_ADDR(0x00000684) -#define IOP331_PBBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000688) -#define IOP331_PBLR0 (volatile u32 *)IOP331_REG_ADDR(0x0000068C) -#define IOP331_PBBAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000690) -#define IOP331_PBLR1 (volatile u32 *)IOP331_REG_ADDR(0x00000694) -#define IOP331_PBBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000698) -#define IOP331_PBLR2 (volatile u32 *)IOP331_REG_ADDR(0x0000069C) -#define IOP331_PBBAR3 (volatile u32 *)IOP331_REG_ADDR(0x000006A0) -#define IOP331_PBLR3 (volatile u32 *)IOP331_REG_ADDR(0x000006A4) -#define IOP331_PBBAR4 (volatile u32 *)IOP331_REG_ADDR(0x000006A8) -#define IOP331_PBLR4 (volatile u32 *)IOP331_REG_ADDR(0x000006AC) -#define IOP331_PBBAR5 (volatile u32 *)IOP331_REG_ADDR(0x000006B0) -#define IOP331_PBLR5 (volatile u32 *)IOP331_REG_ADDR(0x000006B4) -#define IOP331_PBDSCR (volatile u32 *)IOP331_REG_ADDR(0x000006B8) -/* Reserved 0x000006BC */ -#define IOP331_PMBR0 (volatile u32 *)IOP331_REG_ADDR(0x000006C0) -/* Reserved 0x000006C4 through 0x000006DC */ -#define IOP331_PMBR1 (volatile u32 *)IOP331_REG_ADDR(0x000006E0) -#define IOP331_PMBR2 (volatile u32 *)IOP331_REG_ADDR(0x000006E4) - -#define IOP331_PBCR_EN 0x1 - -#define IOP331_PBISR_BOOR_ERR 0x1 - - /* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ /* Internal arbitration unit 0x00000780 through 0x0007BF */ @@ -137,49 +65,6 @@ /* Application accelerator unit 0x00000800 - 0x000008FF */ -#define IOP331_AAU_ACR (volatile u32 *)IOP331_REG_ADDR(0x00000800) -#define IOP331_AAU_ASR (volatile u32 *)IOP331_REG_ADDR(0x00000804) -#define IOP331_AAU_ADAR (volatile u32 *)IOP331_REG_ADDR(0x00000808) -#define IOP331_AAU_ANDAR (volatile u32 *)IOP331_REG_ADDR(0x0000080C) -#define IOP331_AAU_SAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000810) -#define IOP331_AAU_SAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000814) -#define IOP331_AAU_SAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000818) -#define IOP331_AAU_SAR4 (volatile u32 *)IOP331_REG_ADDR(0x0000081C) -#define IOP331_AAU_SAR5 (volatile u32 *)IOP331_REG_ADDR(0x0000082C) -#define IOP331_AAU_SAR6 (volatile u32 *)IOP331_REG_ADDR(0x00000830) -#define IOP331_AAU_SAR7 (volatile u32 *)IOP331_REG_ADDR(0x00000834) -#define IOP331_AAU_SAR8 (volatile u32 *)IOP331_REG_ADDR(0x00000838) -#define IOP331_AAU_SAR9 (volatile u32 *)IOP331_REG_ADDR(0x00000840) -#define IOP331_AAU_SAR10 (volatile u32 *)IOP331_REG_ADDR(0x00000844) -#define IOP331_AAU_SAR11 (volatile u32 *)IOP331_REG_ADDR(0x00000848) -#define IOP331_AAU_SAR12 (volatile u32 *)IOP331_REG_ADDR(0x0000084C) -#define IOP331_AAU_SAR13 (volatile u32 *)IOP331_REG_ADDR(0x00000850) -#define IOP331_AAU_SAR14 (volatile u32 *)IOP331_REG_ADDR(0x00000854) -#define IOP331_AAU_SAR15 (volatile u32 *)IOP331_REG_ADDR(0x00000858) -#define IOP331_AAU_SAR16 (volatile u32 *)IOP331_REG_ADDR(0x0000085C) -#define IOP331_AAU_SAR17 (volatile u32 *)IOP331_REG_ADDR(0x00000864) -#define IOP331_AAU_SAR18 (volatile u32 *)IOP331_REG_ADDR(0x00000868) -#define IOP331_AAU_SAR19 (volatile u32 *)IOP331_REG_ADDR(0x0000086C) -#define IOP331_AAU_SAR20 (volatile u32 *)IOP331_REG_ADDR(0x00000870) -#define IOP331_AAU_SAR21 (volatile u32 *)IOP331_REG_ADDR(0x00000874) -#define IOP331_AAU_SAR22 (volatile u32 *)IOP331_REG_ADDR(0x00000878) -#define IOP331_AAU_SAR23 (volatile u32 *)IOP331_REG_ADDR(0x0000087C) -#define IOP331_AAU_SAR24 (volatile u32 *)IOP331_REG_ADDR(0x00000880) -#define IOP331_AAU_SAR25 (volatile u32 *)IOP331_REG_ADDR(0x00000888) -#define IOP331_AAU_SAR26 (volatile u32 *)IOP331_REG_ADDR(0x0000088C) -#define IOP331_AAU_SAR27 (volatile u32 *)IOP331_REG_ADDR(0x00000890) -#define IOP331_AAU_SAR28 (volatile u32 *)IOP331_REG_ADDR(0x00000894) -#define IOP331_AAU_SAR29 (volatile u32 *)IOP331_REG_ADDR(0x00000898) -#define IOP331_AAU_SAR30 (volatile u32 *)IOP331_REG_ADDR(0x0000089C) -#define IOP331_AAU_SAR31 (volatile u32 *)IOP331_REG_ADDR(0x000008A0) -#define IOP331_AAU_SAR32 (volatile u32 *)IOP331_REG_ADDR(0x000008A4) -#define IOP331_AAU_DAR (volatile u32 *)IOP331_REG_ADDR(0x00000820) -#define IOP331_AAU_ABCR (volatile u32 *)IOP331_REG_ADDR(0x00000824) -#define IOP331_AAU_ADCR (volatile u32 *)IOP331_REG_ADDR(0x00000828) -#define IOP331_AAU_EDCR0 (volatile u32 *)IOP331_REG_ADDR(0x0000083c) -#define IOP331_AAU_EDCR1 (volatile u32 *)IOP331_REG_ADDR(0x00000860) -#define IOP331_AAU_EDCR2 (volatile u32 *)IOP331_REG_ADDR(0x00000884) - #define IOP331_SPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C0) #define IOP331_PPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C8) diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index f3c61d041fc..1018a7486ab 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -97,6 +97,76 @@ extern void gpio_line_set(int line, int value); #define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) #define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) +/* Messaging Unit */ +#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) +#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) +#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318) +#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c) +#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320) +#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324) +#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328) +#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c) +#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330) +#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334) +#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350) +#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354) +#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360) +#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364) +#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368) +#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c) +#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370) +#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374) +#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378) +#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c) +#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380) + +/* DMA Controller */ +#define IOP3XX_DMA0_CCR (volatile u32 *)IOP3XX_REG_ADDR(0x0400) +#define IOP3XX_DMA0_CSR (volatile u32 *)IOP3XX_REG_ADDR(0x0404) +#define IOP3XX_DMA0_DAR (volatile u32 *)IOP3XX_REG_ADDR(0x040c) +#define IOP3XX_DMA0_NDAR (volatile u32 *)IOP3XX_REG_ADDR(0x0410) +#define IOP3XX_DMA0_PADR (volatile u32 *)IOP3XX_REG_ADDR(0x0414) +#define IOP3XX_DMA0_PUADR (volatile u32 *)IOP3XX_REG_ADDR(0x0418) +#define IOP3XX_DMA0_LADR (volatile u32 *)IOP3XX_REG_ADDR(0x041c) +#define IOP3XX_DMA0_BCR (volatile u32 *)IOP3XX_REG_ADDR(0x0420) +#define IOP3XX_DMA0_DCR (volatile u32 *)IOP3XX_REG_ADDR(0x0424) +#define IOP3XX_DMA1_CCR (volatile u32 *)IOP3XX_REG_ADDR(0x0440) +#define IOP3XX_DMA1_CSR (volatile u32 *)IOP3XX_REG_ADDR(0x0444) +#define IOP3XX_DMA1_DAR (volatile u32 *)IOP3XX_REG_ADDR(0x044c) +#define IOP3XX_DMA1_NDAR (volatile u32 *)IOP3XX_REG_ADDR(0x0450) +#define IOP3XX_DMA1_PADR (volatile u32 *)IOP3XX_REG_ADDR(0x0454) +#define IOP3XX_DMA1_PUADR (volatile u32 *)IOP3XX_REG_ADDR(0x0458) +#define IOP3XX_DMA1_LADR (volatile u32 *)IOP3XX_REG_ADDR(0x045c) +#define IOP3XX_DMA1_BCR (volatile u32 *)IOP3XX_REG_ADDR(0x0460) +#define IOP3XX_DMA1_DCR (volatile u32 *)IOP3XX_REG_ADDR(0x0464) + +/* Peripheral bus interface */ +#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680) +#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684) +#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688) +#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c) +#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690) +#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694) +#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698) +#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c) +#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0) +#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4) +#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8) +#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac) +#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0) +#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4) +#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0) +#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0) +#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4) + +/* Peripheral performance monitoring unit */ +#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700) +#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704) +#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708) +#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710) +/* PERCR0 DOESN'T EXIST - index from 1! */ +#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710) + /* General Purpose I/O */ #define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0004) #define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0008) @@ -120,6 +190,50 @@ extern void gpio_line_set(int line, int value); #define IOP3XX_TMR_RATIO_8_1 0x20 #define IOP3XX_TMR_RATIO_16_1 0x30 +/* Application accelerator unit */ +#define IOP3XX_AAU_ACR (volatile u32 *)IOP3XX_REG_ADDR(0x0800) +#define IOP3XX_AAU_ASR (volatile u32 *)IOP3XX_REG_ADDR(0x0804) +#define IOP3XX_AAU_ADAR (volatile u32 *)IOP3XX_REG_ADDR(0x0808) +#define IOP3XX_AAU_ANDAR (volatile u32 *)IOP3XX_REG_ADDR(0x080c) +#define IOP3XX_AAU_SAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0810) +#define IOP3XX_AAU_SAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0814) +#define IOP3XX_AAU_SAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0818) +#define IOP3XX_AAU_SAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x081c) +#define IOP3XX_AAU_DAR (volatile u32 *)IOP3XX_REG_ADDR(0x0820) +#define IOP3XX_AAU_ABCR (volatile u32 *)IOP3XX_REG_ADDR(0x0824) +#define IOP3XX_AAU_ADCR (volatile u32 *)IOP3XX_REG_ADDR(0x0828) +#define IOP3XX_AAU_SAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x082c) +#define IOP3XX_AAU_SAR6 (volatile u32 *)IOP3XX_REG_ADDR(0x0830) +#define IOP3XX_AAU_SAR7 (volatile u32 *)IOP3XX_REG_ADDR(0x0834) +#define IOP3XX_AAU_SAR8 (volatile u32 *)IOP3XX_REG_ADDR(0x0838) +#define IOP3XX_AAU_EDCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x083c) +#define IOP3XX_AAU_SAR9 (volatile u32 *)IOP3XX_REG_ADDR(0x0840) +#define IOP3XX_AAU_SAR10 (volatile u32 *)IOP3XX_REG_ADDR(0x0844) +#define IOP3XX_AAU_SAR11 (volatile u32 *)IOP3XX_REG_ADDR(0x0848) +#define IOP3XX_AAU_SAR12 (volatile u32 *)IOP3XX_REG_ADDR(0x084c) +#define IOP3XX_AAU_SAR13 (volatile u32 *)IOP3XX_REG_ADDR(0x0850) +#define IOP3XX_AAU_SAR14 (volatile u32 *)IOP3XX_REG_ADDR(0x0854) +#define IOP3XX_AAU_SAR15 (volatile u32 *)IOP3XX_REG_ADDR(0x0858) +#define IOP3XX_AAU_SAR16 (volatile u32 *)IOP3XX_REG_ADDR(0x085c) +#define IOP3XX_AAU_EDCR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0860) +#define IOP3XX_AAU_SAR17 (volatile u32 *)IOP3XX_REG_ADDR(0x0864) +#define IOP3XX_AAU_SAR18 (volatile u32 *)IOP3XX_REG_ADDR(0x0868) +#define IOP3XX_AAU_SAR19 (volatile u32 *)IOP3XX_REG_ADDR(0x086c) +#define IOP3XX_AAU_SAR20 (volatile u32 *)IOP3XX_REG_ADDR(0x0870) +#define IOP3XX_AAU_SAR21 (volatile u32 *)IOP3XX_REG_ADDR(0x0874) +#define IOP3XX_AAU_SAR22 (volatile u32 *)IOP3XX_REG_ADDR(0x0878) +#define IOP3XX_AAU_SAR23 (volatile u32 *)IOP3XX_REG_ADDR(0x087c) +#define IOP3XX_AAU_SAR24 (volatile u32 *)IOP3XX_REG_ADDR(0x0880) +#define IOP3XX_AAU_EDCR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0884) +#define IOP3XX_AAU_SAR25 (volatile u32 *)IOP3XX_REG_ADDR(0x0888) +#define IOP3XX_AAU_SAR26 (volatile u32 *)IOP3XX_REG_ADDR(0x088c) +#define IOP3XX_AAU_SAR27 (volatile u32 *)IOP3XX_REG_ADDR(0x0890) +#define IOP3XX_AAU_SAR28 (volatile u32 *)IOP3XX_REG_ADDR(0x0894) +#define IOP3XX_AAU_SAR29 (volatile u32 *)IOP3XX_REG_ADDR(0x0898) +#define IOP3XX_AAU_SAR30 (volatile u32 *)IOP3XX_REG_ADDR(0x089c) +#define IOP3XX_AAU_SAR31 (volatile u32 *)IOP3XX_REG_ADDR(0x08a0) +#define IOP3XX_AAU_SAR32 (volatile u32 *)IOP3XX_REG_ADDR(0x08a4) + /* I2C bus interface unit */ #define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) #define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) -- cgit v1.2.3 From c852ac80440db9b0a47f48578e9c6303078abbc1 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Sep 2006 23:26:25 +0100 Subject: [ARM] 3832/1: iop3xx: coding style cleanup Since the iop32x code isn't iop321-specific, and the iop33x code isn't iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up the code to conform to the coding style guidelines somewhat better. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/debug-macro.S | 14 ++-- include/asm-arm/arch-iop32x/dma.h | 4 +- include/asm-arm/arch-iop32x/entry-macro.S | 11 ++- include/asm-arm/arch-iop32x/hardware.h | 24 ++++--- include/asm-arm/arch-iop32x/io.h | 11 +-- include/asm-arm/arch-iop32x/iop321.h | 86 ----------------------- include/asm-arm/arch-iop32x/iop32x.h | 28 ++++++++ include/asm-arm/arch-iop32x/iq31244.h | 8 +-- include/asm-arm/arch-iop32x/iq80321.h | 8 +-- include/asm-arm/arch-iop32x/irqs.h | 66 +++++++++--------- include/asm-arm/arch-iop32x/memory.h | 7 +- include/asm-arm/arch-iop32x/system.h | 17 ++--- include/asm-arm/arch-iop32x/timex.h | 5 +- include/asm-arm/arch-iop32x/uncompress.h | 7 +- include/asm-arm/arch-iop32x/vmalloc.h | 15 +--- include/asm-arm/arch-iop33x/debug-macro.S | 12 ++-- include/asm-arm/arch-iop33x/dma.h | 4 +- include/asm-arm/arch-iop33x/entry-macro.S | 8 +-- include/asm-arm/arch-iop33x/hardware.h | 19 +++--- include/asm-arm/arch-iop33x/io.h | 12 ++-- include/asm-arm/arch-iop33x/iop331.h | 110 ------------------------------ include/asm-arm/arch-iop33x/iop33x.h | 33 +++++++++ include/asm-arm/arch-iop33x/iq80331.h | 8 +-- include/asm-arm/arch-iop33x/iq80332.h | 8 +-- include/asm-arm/arch-iop33x/irqs.h | 86 +++++++++++------------ include/asm-arm/arch-iop33x/memory.h | 6 +- include/asm-arm/arch-iop33x/system.h | 17 ++--- include/asm-arm/arch-iop33x/timex.h | 3 +- include/asm-arm/arch-iop33x/uncompress.h | 9 +-- include/asm-arm/arch-iop33x/vmalloc.h | 15 +--- 30 files changed, 249 insertions(+), 412 deletions(-) delete mode 100644 include/asm-arm/arch-iop32x/iop321.h create mode 100644 include/asm-arm/arch-iop32x/iop32x.h delete mode 100644 include/asm-arm/arch-iop33x/iop331.h create mode 100644 include/asm-arm/arch-iop33x/iop33x.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S index 75ab2e0d8c6..9022b6849e2 100644 --- a/include/asm-arm/arch-iop32x/debug-macro.S +++ b/include/asm-arm/arch-iop32x/debug-macro.S @@ -1,18 +1,18 @@ -/* linux/include/asm-arm/arch-iop32x/debug-macro.S +/* + * include/asm-arm/arch-iop32x/debug-macro.S * * Debugging macro include header * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * -*/ + */ - .macro addruart,rx - mov \rx, #0xfe000000 @ physical + .macro addruart, rx + mov \rx, #0xfe000000 @ physical as well as virtual orr \rx, \rx, #0x00800000 @ location of the UART .endm diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h index 5be36676e58..e977a9ef316 100644 --- a/include/asm-arm/arch-iop32x/dma.h +++ b/include/asm-arm/arch-iop32x/dma.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-iop32x/dma.h + * include/asm-arm/arch-iop32x/dma.h * - * Copyright (C) 2004 Intel Corp. + * Copyright (C) 2004 Intel Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S index 3497fef0b89..1500cbbd229 100644 --- a/include/asm-arm/arch-iop32x/entry-macro.S +++ b/include/asm-arm/arch-iop32x/entry-macro.S @@ -3,19 +3,16 @@ * * Low-level IRQ helper macros for IOP32x-based platforms * - * This file is licensed under the terms of the GNU General Public + * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include - .macro disable_fiq + .macro disable_fiq .endm - /* - * Note: only deal with normal interrupts, not FIQ - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \base, =IOP3XX_REG_ADDR(0x07D8) ldr \irqstat, [\base] @ Read IINTSRC cmp \irqstat, #0 diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h index 16d0630ab25..6a3001f2f7e 100644 --- a/include/asm-arm/arch-iop32x/hardware.h +++ b/include/asm-arm/arch-iop32x/hardware.h @@ -1,8 +1,9 @@ /* - * linux/include/asm-arm/arch-iop32x/hardware.h + * include/asm-arm/arch-iop32x/hardware.h */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H + +#ifndef __HARDWARE_H +#define __HARDWARE_H #include @@ -13,21 +14,23 @@ * the IO resources. * * The PCI IO space is located at virtual 0xfe000000 from physical - * 0x90000000. The PCI BARs must be programmed with physical addresses, - * but when we read them, we convert them to virtual addresses. See - * arch/arm/mach-iop3xx/iop3xx-pci.c + * 0x90000000. The PCI BARs must be programmed with physical addresses, + * but when we read them, we convert them to virtual addresses. See + * arch/arm/plat-iop/pci.c. */ - #define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x00000000 #define PCIBIOS_MIN_MEM 0x00000000 +#ifndef __ASSEMBLY__ +void iop32x_init_irq(void); +#endif + /* * Generic chipset bits - * */ -#include "iop321.h" +#include "iop32x.h" /* * Board specific bits @@ -35,4 +38,5 @@ #include "iq80321.h" #include "iq31244.h" -#endif /* _ASM_ARCH_HARDWARE_H */ + +#endif diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h index 36d05ada12c..12d9ee02cde 100644 --- a/include/asm-arm/arch-iop32x/io.h +++ b/include/asm-arm/arch-iop32x/io.h @@ -1,21 +1,22 @@ /* - * linux/include/asm-arm/arch-iop32x/io.h + * include/asm-arm/arch-iop32x/io.h * - * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2001 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H +#ifndef __IO_H +#define __IO_H #include -#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)(p)) #define __mem_pci(a) (a) + #endif diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h deleted file mode 100644 index 1757222a4ca..00000000000 --- a/include/asm-arm/arch-iop32x/iop321.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * linux/include/asm/arch-iop32x/iop321.h - * - * Intel IOP321 Chip definitions - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IOP321_HW_H_ -#define _IOP321_HW_H_ - - -/* - * This is needed for mixed drivers that need to work on all - * IOP3xx variants but behave slightly differently on each. - */ -#ifndef __ASSEMBLY__ -#define iop_is_321() 1 -#endif - -/* - * IOP321 chipset registers - */ -#define IOP321_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ -#define IOP321_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */ -#define IOP321_REG_ADDR(reg) (IOP321_VIRT_MEM_BASE | (reg)) - -/* Reserved 0x00000000 through 0x000000FF */ - -/* Address Translation Unit 0x00000100 through 0x000001FF */ - -/* Messaging Unit 0x00000300 through 0x000003FF */ - -/* DMA Controller 0x00000400 through 0x000004FF */ - -/* Memory controller 0x00000500 through 0x0005FF */ - -/* Peripheral bus interface unit 0x00000680 through 0x0006FF */ - -/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ - -/* Internal arbitration unit 0x00000780 through 0x0007BF */ -#define IOP321_IACR (volatile u32 *)IOP321_REG_ADDR(0x00000780) -#define IOP321_MTTR1 (volatile u32 *)IOP321_REG_ADDR(0x00000784) -#define IOP321_MTTR2 (volatile u32 *)IOP321_REG_ADDR(0x00000788) - -/* General Purpose I/O Registers */ -#define IOP321_GPOE (volatile u32 *)IOP321_REG_ADDR(0x000007C4) -#define IOP321_GPID (volatile u32 *)IOP321_REG_ADDR(0x000007C8) -#define IOP321_GPOD (volatile u32 *)IOP321_REG_ADDR(0x000007CC) - -/* Interrupt Controller */ -#define IOP321_INTCTL (volatile u32 *)IOP321_REG_ADDR(0x000007D0) -#define IOP321_INTSTR (volatile u32 *)IOP321_REG_ADDR(0x000007D4) -#define IOP321_IINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007D8) -#define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC) - -/* Application accelerator unit 0x00000800 - 0x000008FF */ - -/* SSP serial port unit 0x00001600 - 0x0000167F */ -/* I2C bus interface unit 0x00001680 - 0x000016FF */ - -/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ - -/* - * Peripherals that are shared between the iop32x and iop33x but - * located at different addresses. - */ -#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg)) -#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) - -#include - - -#ifndef __ASSEMBLY__ -extern void iop321_init_irq(void); -extern void iop321_time_init(void); -#endif - -#endif // _IOP321_HW_H_ diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h new file mode 100644 index 00000000000..4bbd85f3ed2 --- /dev/null +++ b/include/asm-arm/arch-iop32x/iop32x.h @@ -0,0 +1,28 @@ +/* + * include/asm-arm/arch-iop32x/iop32x.h + * + * Intel IOP32X Chip definitions + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOP32X_H +#define __IOP32X_H + +/* + * Peripherals that are shared between the iop32x and iop33x but + * located at different addresses. + */ +#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg)) +#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) + +#include + + +#endif diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h index cf2d2343398..fff4eafa1f6 100644 --- a/include/asm-arm/arch-iop32x/iq31244.h +++ b/include/asm-arm/arch-iop32x/iq31244.h @@ -1,11 +1,11 @@ /* - * linux/include/asm/arch-iop32x/iq31244.h + * include/asm-arm/arch-iop32x/iq31244.h * * Intel IQ31244 evaluation board registers */ -#ifndef _IQ31244_H_ -#define _IQ31244_H_ +#ifndef __IQ31244_H +#define __IQ31244_H #define IQ31244_UART 0xfe800000 /* UART #1 */ #define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */ @@ -14,4 +14,4 @@ #define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */ -#endif // _IQ31244_H_ +#endif diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h index 55d70f49b7f..eb69db9b9a0 100644 --- a/include/asm-arm/arch-iop32x/iq80321.h +++ b/include/asm-arm/arch-iop32x/iq80321.h @@ -1,11 +1,11 @@ /* - * linux/include/asm/arch-iop32x/iq80321.h + * include/asm-arm/arch-iop32x/iq80321.h * * Intel IQ80321 evaluation board registers */ -#ifndef _IQ80321_H_ -#define _IQ80321_H_ +#ifndef __IQ80321_H +#define __IQ80321_H #define IQ80321_UART 0xfe800000 /* UART #1 */ #define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */ @@ -14,4 +14,4 @@ #define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */ -#endif // _IQ80321_H_ +#endif diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h index a48327ced92..bbaef873afc 100644 --- a/include/asm-arm/arch-iop32x/irqs.h +++ b/include/asm-arm/arch-iop32x/irqs.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-iop32x/irqs.h + * include/asm-arm/arch-iop32x/irqs.h * * Author: Rory Bolt * Copyright: (C) 2002 Rory Bolt @@ -7,44 +7,44 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ -#ifndef _IRQS_H_ -#define _IRQS_H_ + +#ifndef __IRQS_H +#define __IRQS_H /* * IOP80321 chipset interrupts */ -#define IRQ_IOP321_DMA0_EOT 0 -#define IRQ_IOP321_DMA0_EOC 1 -#define IRQ_IOP321_DMA1_EOT 2 -#define IRQ_IOP321_DMA1_EOC 3 -#define IRQ_IOP321_AA_EOT 6 -#define IRQ_IOP321_AA_EOC 7 -#define IRQ_IOP321_CORE_PMON 8 -#define IRQ_IOP321_TIMER0 9 -#define IRQ_IOP321_TIMER1 10 -#define IRQ_IOP321_I2C_0 11 -#define IRQ_IOP321_I2C_1 12 -#define IRQ_IOP321_MESSAGING 13 -#define IRQ_IOP321_ATU_BIST 14 -#define IRQ_IOP321_PERFMON 15 -#define IRQ_IOP321_CORE_PMU 16 -#define IRQ_IOP321_BIU_ERR 17 -#define IRQ_IOP321_ATU_ERR 18 -#define IRQ_IOP321_MCU_ERR 19 -#define IRQ_IOP321_DMA0_ERR 20 -#define IRQ_IOP321_DMA1_ERR 21 -#define IRQ_IOP321_AA_ERR 23 -#define IRQ_IOP321_MSG_ERR 24 -#define IRQ_IOP321_SSP 25 -#define IRQ_IOP321_XINT0 27 -#define IRQ_IOP321_XINT1 28 -#define IRQ_IOP321_XINT2 29 -#define IRQ_IOP321_XINT3 30 -#define IRQ_IOP321_HPI 31 +#define IRQ_IOP32X_DMA0_EOT 0 +#define IRQ_IOP32X_DMA0_EOC 1 +#define IRQ_IOP32X_DMA1_EOT 2 +#define IRQ_IOP32X_DMA1_EOC 3 +#define IRQ_IOP32X_AA_EOT 6 +#define IRQ_IOP32X_AA_EOC 7 +#define IRQ_IOP32X_CORE_PMON 8 +#define IRQ_IOP32X_TIMER0 9 +#define IRQ_IOP32X_TIMER1 10 +#define IRQ_IOP32X_I2C_0 11 +#define IRQ_IOP32X_I2C_1 12 +#define IRQ_IOP32X_MESSAGING 13 +#define IRQ_IOP32X_ATU_BIST 14 +#define IRQ_IOP32X_PERFMON 15 +#define IRQ_IOP32X_CORE_PMU 16 +#define IRQ_IOP32X_BIU_ERR 17 +#define IRQ_IOP32X_ATU_ERR 18 +#define IRQ_IOP32X_MCU_ERR 19 +#define IRQ_IOP32X_DMA0_ERR 20 +#define IRQ_IOP32X_DMA1_ERR 21 +#define IRQ_IOP32X_AA_ERR 23 +#define IRQ_IOP32X_MSG_ERR 24 +#define IRQ_IOP32X_SSP 25 +#define IRQ_IOP32X_XINT0 27 +#define IRQ_IOP32X_XINT1 28 +#define IRQ_IOP32X_XINT2 29 +#define IRQ_IOP32X_XINT3 30 +#define IRQ_IOP32X_HPI 31 #define NR_IRQS 32 -#endif // _IRQ_H_ +#endif diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h index 4c64d9e7229..764cd3f0d41 100644 --- a/include/asm-arm/arch-iop32x/memory.h +++ b/include/asm-arm/arch-iop32x/memory.h @@ -1,9 +1,9 @@ /* - * linux/include/asm-arm/arch-iop32x/memory.h + * include/asm-arm/arch-iop32x/memory.h */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H +#ifndef __MEMORY_H +#define __MEMORY_H #include @@ -19,7 +19,6 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ - #define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) #define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h index 1ac207a0d52..c65ede3e627 100644 --- a/include/asm-arm/arch-iop32x/system.h +++ b/include/asm-arm/arch-iop32x/system.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-iop32x/system.h + * include/asm-arm/arch-iop32x/system.h * - * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2001 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,17 +13,10 @@ static inline void arch_idle(void) cpu_do_idle(); } - static inline void arch_reset(char mode) { - *IOP3XX_PCSR = 0x30; + *IOP3XX_PCSR = 0x30; - if ( 1 && mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* No on-chip reset capability */ - cpu_reset(0); - } + /* Jump into ROM at address 0 */ + cpu_reset(0); } - diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h index 328f37282c3..9934b087311 100644 --- a/include/asm-arm/arch-iop32x/timex.h +++ b/include/asm-arm/arch-iop32x/timex.h @@ -1,8 +1,9 @@ /* - * linux/include/asm-arm/arch-iop32x/timex.h + * include/asm-arm/arch-iop32x/timex.h * - * IOP3xx architecture timex specifications + * IOP32x architecture timex specifications */ + #include #define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h index 4a85f20c796..e64f52bf2bc 100644 --- a/include/asm-arm/arch-iop32x/uncompress.h +++ b/include/asm-arm/arch-iop32x/uncompress.h @@ -1,6 +1,7 @@ /* - * linux/include/asm-arm/arch-iop32x/uncompress.h + * include/asm-arm/arch-iop32x/uncompress.h */ + #include #include #include @@ -8,13 +9,13 @@ static volatile u8 *uart_base; -#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) +#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) static inline void putc(char c) { while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) barrier(); - *uart_base = c; + uart_base[UART_TX] = c; } static inline void flush(void) diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h index 8492e1708a6..0a70baa1951 100644 --- a/include/asm-arm/arch-iop32x/vmalloc.h +++ b/include/asm-arm/arch-iop32x/vmalloc.h @@ -1,16 +1,5 @@ /* - * linux/include/asm-arm/arch-iop32x/vmalloc.h + * include/asm-arm/arch-iop32x/vmalloc.h */ -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -//#define VMALLOC_END (0xe8000000) -/* increase usable physical RAM to ~992M per RMK */ -#define VMALLOC_END (0xfe000000) - +#define VMALLOC_END 0xfe000000 diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S index b647edff475..9e7132ebe6a 100644 --- a/include/asm-arm/arch-iop33x/debug-macro.S +++ b/include/asm-arm/arch-iop33x/debug-macro.S @@ -1,17 +1,17 @@ -/* linux/include/asm-arm/arch-iop33x/debug-macro.S +/* + * include/asm-arm/arch-iop33x/debug-macro.S * * Debugging macro include header * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * -*/ + */ - .macro addruart,rx + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ mmu enabled? moveq \rx, #0xff000000 @ physical diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h index d577ca59f4b..b7775fdc5ad 100644 --- a/include/asm-arm/arch-iop33x/dma.h +++ b/include/asm-arm/arch-iop33x/dma.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-iop33x/dma.h + * include/asm-arm/arch-iop33x/dma.h * - * Copyright (C) 2004 Intel Corp. + * Copyright (C) 2004 Intel Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S index 4750e98e9b4..92b791702e3 100644 --- a/include/asm-arm/arch-iop33x/entry-macro.S +++ b/include/asm-arm/arch-iop33x/entry-macro.S @@ -3,16 +3,16 @@ * * Low-level IRQ helper macros for IOP33x-based platforms * - * This file is licensed under the terms of the GNU General Public + * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include +#include - .macro disable_fiq + .macro disable_fiq .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \base, =IOP3XX_REG_ADDR(0x07C8) ldr \irqstat, [\base] @ Read IINTVEC cmp \irqstat, #0 diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h index 3ebfdc6fea9..0659cf94d04 100644 --- a/include/asm-arm/arch-iop33x/hardware.h +++ b/include/asm-arm/arch-iop33x/hardware.h @@ -1,8 +1,9 @@ /* - * linux/include/asm-arm/arch-iop33x/hardware.h + * include/asm-arm/arch-iop33x/hardware.h */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H + +#ifndef __HARDWARE_H +#define __HARDWARE_H #include @@ -15,14 +16,15 @@ * The PCI IO space is located at virtual 0xfe000000 from physical * 0x90000000. The PCI BARs must be programmed with physical addresses, * but when we read them, we convert them to virtual addresses. See - * arch/arm/mach-iop33x/pci.c + * arch/arm/mach-iop3xx/iop3xx-pci.c */ - -#define pcibios_assign_all_busses() 1 +#define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x00000000 #define PCIBIOS_MIN_MEM 0x00000000 #ifndef __ASSEMBLY__ +void iop33x_init_irq(void); + extern struct platform_device iop33x_uart0_device; extern struct platform_device iop33x_uart1_device; #endif @@ -32,7 +34,7 @@ extern struct platform_device iop33x_uart1_device; * Generic chipset bits * */ -#include "iop331.h" +#include "iop33x.h" /* * Board specific bits @@ -40,4 +42,5 @@ extern struct platform_device iop33x_uart1_device; #include "iq80331.h" #include "iq80332.h" -#endif /* _ASM_ARCH_HARDWARE_H */ + +#endif diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h index a9949d5d495..c017402bab9 100644 --- a/include/asm-arm/arch-iop33x/io.h +++ b/include/asm-arm/arch-iop33x/io.h @@ -1,21 +1,21 @@ /* - * linux/include/asm-arm/arch-iop33x/io.h + * include/asm-arm/arch-iop33x/io.h * - * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2001 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H +#ifndef __IO_H +#define __IO_H #include -#define IO_SPACE_LIMIT 0xffffffff - +#define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)(p)) #define __mem_pci(a) (a) + #endif diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h deleted file mode 100644 index 8c7ec583615..00000000000 --- a/include/asm-arm/arch-iop33x/iop331.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * linux/include/asm/arch-iop33x/iop331.h - * - * Intel IOP331 Chip definitions - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IOP331_HW_H_ -#define _IOP331_HW_H_ - - -/* - * This is needed for mixed drivers that need to work on all - * IOP3xx variants but behave slightly differently on each. - */ -#ifndef __ASSEMBLY__ -#define iop_is_331() 1 -#endif - -/* - * IOP331 chipset registers - */ -#define IOP331_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ -#define IOP331_PHYS_MEM_BASE 0xffffe000 /* chip physical memory address */ -#define IOP331_REG_ADDR(reg) (IOP331_VIRT_MEM_BASE | (reg)) - -/* Reserved 0x00000000 through 0x000000FF */ - -/* Address Translation Unit 0x00000100 through 0x000001FF */ - -/* Messaging Unit 0x00000300 through 0x000003FF */ - -/* DMA Controller 0x00000400 through 0x000004FF */ - -/* Memory controller 0x00000500 through 0x0005FF */ - -/* Peripheral bus interface unit 0x00000680 through 0x0006FF */ - -/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */ -/* Internal arbitration unit 0x00000780 through 0x0007BF */ - -/* Interrupt Controller */ -#define IOP331_INTCTL0 (volatile u32 *)IOP331_REG_ADDR(0x00000790) -#define IOP331_INTCTL1 (volatile u32 *)IOP331_REG_ADDR(0x00000794) -#define IOP331_INTSTR0 (volatile u32 *)IOP331_REG_ADDR(0x00000798) -#define IOP331_INTSTR1 (volatile u32 *)IOP331_REG_ADDR(0x0000079C) -#define IOP331_IINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A0) -#define IOP331_IINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007A4) -#define IOP331_FINTSRC0 (volatile u32 *)IOP331_REG_ADDR(0x000007A8) -#define IOP331_FINTSRC1 (volatile u32 *)IOP331_REG_ADDR(0x000007AC) -#define IOP331_IPR0 (volatile u32 *)IOP331_REG_ADDR(0x000007B0) -#define IOP331_IPR1 (volatile u32 *)IOP331_REG_ADDR(0x000007B4) -#define IOP331_IPR2 (volatile u32 *)IOP331_REG_ADDR(0x000007B8) -#define IOP331_IPR3 (volatile u32 *)IOP331_REG_ADDR(0x000007BC) -#define IOP331_INTBASE (volatile u32 *)IOP331_REG_ADDR(0x000007C0) -#define IOP331_INTSIZE (volatile u32 *)IOP331_REG_ADDR(0x000007C4) -#define IOP331_IINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007C8) -#define IOP331_FINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007CC) - - -/* Application accelerator unit 0x00000800 - 0x000008FF */ - -#define IOP331_SPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C0) -#define IOP331_PPDSCR (volatile u32 *)IOP331_REG_ADDR(0x000015C8) -/* SSP serial port unit 0x00001600 - 0x0000167F */ - -/* I2C bus interface unit 0x00001680 - 0x000016FF */ - -/* 0x00001700 through 0x0000172C UART 0 */ - -/* Reserved 0x00001730 through 0x0000173F */ - -/* 0x00001740 through 0x0000176C UART 1 */ - -#define IOP331_UART0_PHYS (IOP331_PHYS_MEM_BASE | 0x00001700) /* UART #1 physical */ -#define IOP331_UART1_PHYS (IOP331_PHYS_MEM_BASE | 0x00001740) /* UART #2 physical */ -#define IOP331_UART0_VIRT (IOP331_VIRT_MEM_BASE | 0x00001700) /* UART #1 virtual addr */ -#define IOP331_UART1_VIRT (IOP331_VIRT_MEM_BASE | 0x00001740) /* UART #2 virtual addr */ - -/* Reserved 0x00001770 through 0x0000177F */ - -/* General Purpose I/O Registers */ -#define IOP331_GPOE (volatile u32 *)IOP331_REG_ADDR(0x00001780) -#define IOP331_GPID (volatile u32 *)IOP331_REG_ADDR(0x00001784) -#define IOP331_GPOD (volatile u32 *)IOP331_REG_ADDR(0x00001788) - -/* Reserved 0x0000178c through 0x000019ff */ - -/* - * Peripherals that are shared between the iop32x and iop33x but - * located at different addresses. - */ -#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg)) -#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg)) - -#include - - -#ifndef __ASSEMBLY__ -extern void iop331_init_irq(void); -extern void iop331_time_init(void); -#endif - -#endif // _IOP331_HW_H_ diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h new file mode 100644 index 00000000000..7ac6e93db5f --- /dev/null +++ b/include/asm-arm/arch-iop33x/iop33x.h @@ -0,0 +1,33 @@ +/* + * include/asm-arm/arch-iop33x/iop33x.h + * + * Intel IOP33X Chip definitions + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright (C) 2003, 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOP33X_H +#define __IOP33X_H + +/* + * Peripherals that are shared between the iop32x and iop33x but + * located at different addresses. + */ +#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg)) +#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg)) + +#include + +/* UARTs */ +#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700) +#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700) +#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740) +#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740) + + +#endif diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h index 186762bf894..79b9302017e 100644 --- a/include/asm-arm/arch-iop33x/iq80331.h +++ b/include/asm-arm/arch-iop33x/iq80331.h @@ -1,11 +1,11 @@ /* - * linux/include/asm/arch-iop33x/iq80331.h + * include/asm-arm/arch-iop33x/iq80331.h * * Intel IQ80331 evaluation board registers */ -#ifndef _IQ80331_H_ -#define _IQ80331_H_ +#ifndef __IQ80331_H +#define __IQ80331_H #define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */ #define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ @@ -13,4 +13,4 @@ #define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */ -#endif // _IQ80331_H_ +#endif diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h index 2a5d4ee01df..05316562949 100644 --- a/include/asm-arm/arch-iop33x/iq80332.h +++ b/include/asm-arm/arch-iop33x/iq80332.h @@ -1,11 +1,11 @@ /* - * linux/include/asm/arch-iop33x/iq80332.h + * include/asm-arm/arch-iop33x/iq80332.h * * Intel IQ80332 evaluation board registers */ -#ifndef _IQ80332_H_ -#define _IQ80332_H_ +#ifndef __IQ80332_H +#define __IQ80332_H #define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */ #define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ @@ -13,4 +13,4 @@ #define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */ -#endif // _IQ80332_H_ +#endif diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h index a875404a07f..d045f840339 100644 --- a/include/asm-arm/arch-iop33x/irqs.h +++ b/include/asm-arm/arch-iop33x/irqs.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-iop33x/irqs.h + * include/asm-arm/arch-iop33x/irqs.h * * Author: Dave Jiang (dave.jiang@intel.com) * Copyright: (C) 2003 Intel Corp. @@ -7,54 +7,54 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ -#ifndef _IRQS_H_ -#define _IRQS_H_ + +#ifndef __IRQS_H +#define __IRQS_H /* * IOP80331 chipset interrupts */ -#define IRQ_IOP331_DMA0_EOT 0 -#define IRQ_IOP331_DMA0_EOC 1 -#define IRQ_IOP331_DMA1_EOT 2 -#define IRQ_IOP331_DMA1_EOC 3 -#define IRQ_IOP331_AA_EOT 6 -#define IRQ_IOP331_AA_EOC 7 -#define IRQ_IOP331_TIMER0 8 -#define IRQ_IOP331_TIMER1 9 -#define IRQ_IOP331_I2C_0 10 -#define IRQ_IOP331_I2C_1 11 -#define IRQ_IOP331_MSG 12 -#define IRQ_IOP331_MSGIBQ 13 -#define IRQ_IOP331_ATU_BIST 14 -#define IRQ_IOP331_PERFMON 15 -#define IRQ_IOP331_CORE_PMU 16 -#define IRQ_IOP331_XINT0 24 -#define IRQ_IOP331_XINT1 25 -#define IRQ_IOP331_XINT2 26 -#define IRQ_IOP331_XINT3 27 -#define IRQ_IOP331_XINT8 32 -#define IRQ_IOP331_XINT9 33 -#define IRQ_IOP331_XINT10 34 -#define IRQ_IOP331_XINT11 35 -#define IRQ_IOP331_XINT12 36 -#define IRQ_IOP331_XINT13 37 -#define IRQ_IOP331_XINT14 38 -#define IRQ_IOP331_XINT15 39 -#define IRQ_IOP331_UART0 51 -#define IRQ_IOP331_UART1 52 -#define IRQ_IOP331_PBIE 53 -#define IRQ_IOP331_ATU_CRW 54 -#define IRQ_IOP331_ATU_ERR 55 -#define IRQ_IOP331_MCU_ERR 56 -#define IRQ_IOP331_DMA0_ERR 57 -#define IRQ_IOP331_DMA1_ERR 58 -#define IRQ_IOP331_AA_ERR 60 -#define IRQ_IOP331_MSG_ERR 62 -#define IRQ_IOP331_HPI 63 +#define IRQ_IOP33X_DMA0_EOT 0 +#define IRQ_IOP33X_DMA0_EOC 1 +#define IRQ_IOP33X_DMA1_EOT 2 +#define IRQ_IOP33X_DMA1_EOC 3 +#define IRQ_IOP33X_AA_EOT 6 +#define IRQ_IOP33X_AA_EOC 7 +#define IRQ_IOP33X_TIMER0 8 +#define IRQ_IOP33X_TIMER1 9 +#define IRQ_IOP33X_I2C_0 10 +#define IRQ_IOP33X_I2C_1 11 +#define IRQ_IOP33X_MSG 12 +#define IRQ_IOP33X_MSGIBQ 13 +#define IRQ_IOP33X_ATU_BIST 14 +#define IRQ_IOP33X_PERFMON 15 +#define IRQ_IOP33X_CORE_PMU 16 +#define IRQ_IOP33X_XINT0 24 +#define IRQ_IOP33X_XINT1 25 +#define IRQ_IOP33X_XINT2 26 +#define IRQ_IOP33X_XINT3 27 +#define IRQ_IOP33X_XINT8 32 +#define IRQ_IOP33X_XINT9 33 +#define IRQ_IOP33X_XINT10 34 +#define IRQ_IOP33X_XINT11 35 +#define IRQ_IOP33X_XINT12 36 +#define IRQ_IOP33X_XINT13 37 +#define IRQ_IOP33X_XINT14 38 +#define IRQ_IOP33X_XINT15 39 +#define IRQ_IOP33X_UART0 51 +#define IRQ_IOP33X_UART1 52 +#define IRQ_IOP33X_PBIE 53 +#define IRQ_IOP33X_ATU_CRW 54 +#define IRQ_IOP33X_ATU_ERR 55 +#define IRQ_IOP33X_MCU_ERR 56 +#define IRQ_IOP33X_DMA0_ERR 57 +#define IRQ_IOP33X_DMA1_ERR 58 +#define IRQ_IOP33X_AA_ERR 60 +#define IRQ_IOP33X_MSG_ERR 62 +#define IRQ_IOP33X_HPI 63 #define NR_IRQS 64 -#endif // _IRQ_H_ +#endif diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h index de208d2cca4..0d39139b241 100644 --- a/include/asm-arm/arch-iop33x/memory.h +++ b/include/asm-arm/arch-iop33x/memory.h @@ -1,9 +1,9 @@ /* - * linux/include/asm-arm/arch-iop33x/memory.h + * include/asm-arm/arch-iop33x/memory.h */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H +#ifndef __MEMORY_H +#define __MEMORY_H #include diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h index 8270ad9f86c..00dd07ece26 100644 --- a/include/asm-arm/arch-iop33x/system.h +++ b/include/asm-arm/arch-iop33x/system.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-iop33x/system.h + * include/asm-arm/arch-iop33x/system.h * - * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2001 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,17 +13,10 @@ static inline void arch_idle(void) cpu_do_idle(); } - static inline void arch_reset(char mode) { - *IOP3XX_PCSR = 0x30; + *IOP3XX_PCSR = 0x30; - if ( 1 && mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* No on-chip reset capability */ - cpu_reset(0); - } + /* Jump into ROM at address 0 */ + cpu_reset(0); } - diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h index 8994322a09f..fe3e1e369ff 100644 --- a/include/asm-arm/arch-iop33x/timex.h +++ b/include/asm-arm/arch-iop33x/timex.h @@ -1,8 +1,9 @@ /* - * linux/include/asm-arm/arch-iop33x/timex.h + * include/asm-arm/arch-iop33x/timex.h * * IOP3xx architecture timex specifications */ + #include #define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h index 62904ae3b03..e17fbc05877 100644 --- a/include/asm-arm/arch-iop33x/uncompress.h +++ b/include/asm-arm/arch-iop33x/uncompress.h @@ -1,6 +1,7 @@ /* - * linux/include/asm-arm/arch-iop33x/uncompress.h + * include/asm-arm/arch-iop33x/uncompress.h */ + #include #include #include @@ -8,13 +9,13 @@ static volatile u32 *uart_base; -#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) +#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) static inline void putc(char c) { while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) barrier(); - *uart_base = c; + uart_base[UART_TX] = c; } static inline void flush(void) @@ -24,7 +25,7 @@ static inline void flush(void) static __inline__ void __arch_decomp_setup(unsigned long arch_id) { if (machine_is_iq80331() || machine_is_iq80332()) - uart_base = (volatile u32 *)IOP331_UART0_PHYS; + uart_base = (volatile u32 *)IOP33X_UART0_PHYS; else uart_base = (volatile u32 *)0xfe800000; } diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h index b5092027449..66f545a7f4f 100644 --- a/include/asm-arm/arch-iop33x/vmalloc.h +++ b/include/asm-arm/arch-iop33x/vmalloc.h @@ -1,16 +1,5 @@ /* - * linux/include/asm-arm/arch-iop33x/vmalloc.h + * include/asm-arm/arch-iop33x/vmalloc.h */ -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -//#define VMALLOC_END (0xe8000000) -/* increase usable physical RAM to ~992M per RMK */ -#define VMALLOC_END (0xfe000000) - +#define VMALLOC_END 0xfe000000 -- cgit v1.2.3 From 3b7a86c2f01dafa797908fdcf386f51eb0d01f29 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 20 Sep 2006 21:57:06 +0100 Subject: [ARM] 3846/1: S3C24XX: Fix osiris memory map The memory mapping for the Osiris machine are all off by one bit, and the base address has been fixed for writing (bit25 is being checked by the write, but not on read) Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/osiris-map.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h index e2d406218ae..a14164dfa52 100644 --- a/include/asm-arm/arch-s3c2410/osiris-map.h +++ b/include/asm-arm/arch-s3c2410/osiris-map.h @@ -18,22 +18,22 @@ /* start peripherals off after the S3C2410 */ -#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x05000000)) +#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000)) -#define OSIRIS_PA_CPLD (S3C2410_CS1 | (3<<25)) +#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26)) /* we put the CPLD registers next, to get them out of the way */ -#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00000000) /* 0x01300000 */ +#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00000000) #define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD) -#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00100000) /* 0x01400000 */ -#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (1<<24)) +#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00100000) +#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (1<<23)) -#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00200000) /* 0x01500000 */ -#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<24)) +#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00200000) +#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23)) -#define OSIRIS_VA_CTRL4 OSIRIS_IOADDR(0x00300000) /* 0x01600000 */ -#define OSIRIS_PA_CTRL4 (OSIRIS_PA_CPLD + (3<<24)) +#define OSIRIS_VA_CTRL4 OSIRIS_IOADDR(0x00300000) +#define OSIRIS_PA_CTRL4 (OSIRIS_PA_CPLD + (3<<23)) #endif /* __ASM_ARCH_OSIRISMAP_H */ -- cgit v1.2.3 From 17b602b1c1a38f3f0a4461bb1f571346e751b36b Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 21 Sep 2006 02:24:38 +0100 Subject: [ARM] 3849/1: fix get_unaligned() for gcc >= 4.1 gcc 4.1's __typeof__ propagates 'const', which breaks get_unaligned(). Rewrite get_unaligned() not to use __typeof__. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/unaligned.h | 62 ++++++++++++++++++--------------------------- 1 file changed, 25 insertions(+), 37 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h index 1b39c2f322c..795b9e5b9e6 100644 --- a/include/asm-arm/unaligned.h +++ b/include/asm-arm/unaligned.h @@ -3,7 +3,7 @@ #include -extern int __bug_unaligned_x(void *ptr); +extern int __bug_unaligned_x(const void *ptr); /* * What is the most efficient way of loading/storing an unaligned value? @@ -51,44 +51,32 @@ extern int __bug_unaligned_x(void *ptr); #define __get_unaligned_4_be(__p) \ (__p[0] << 24 | __p[1] << 16 | __p[2] << 8 | __p[3]) -#define __get_unaligned_le(ptr) \ - ({ \ - __typeof__(*(ptr)) __v; \ - __u8 *__p = (__u8 *)(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __v = *(ptr); break; \ - case 2: __v = __get_unaligned_2_le(__p); break; \ - case 4: __v = __get_unaligned_4_le(__p); break; \ - case 8: { \ - unsigned int __v1, __v2; \ - __v2 = __get_unaligned_4_le((__p+4)); \ - __v1 = __get_unaligned_4_le(__p); \ - __v = ((unsigned long long)__v2 << 32 | __v1); \ - } \ - break; \ - default: __v = __bug_unaligned_x(__p); break; \ - } \ - __v; \ +#define __get_unaligned_8_le(__p) \ + ((unsigned long long)__get_unaligned_4_le((__p+4)) << 32 | \ + __get_unaligned_4_le(__p)) + +#define __get_unaligned_8_be(__p) \ + ((unsigned long long)__get_unaligned_4_be(__p) << 32 | \ + __get_unaligned_4_be((__p+4))) + +#define __get_unaligned_le(ptr) \ + ({ \ + const __u8 *__p = (const __u8 *)(ptr); \ + __builtin_choose_expr(sizeof(*(ptr)) == 1, *__p, \ + __builtin_choose_expr(sizeof(*(ptr)) == 2, __get_unaligned_2_le(__p), \ + __builtin_choose_expr(sizeof(*(ptr)) == 4, __get_unaligned_4_le(__p), \ + __builtin_choose_expr(sizeof(*(ptr)) == 8, __get_unaligned_8_le(__p), \ + (void)__bug_unaligned_x(__p))))); \ }) -#define __get_unaligned_be(ptr) \ - ({ \ - __typeof__(*(ptr)) __v; \ - __u8 *__p = (__u8 *)(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __v = *(ptr); break; \ - case 2: __v = __get_unaligned_2_be(__p); break; \ - case 4: __v = __get_unaligned_4_be(__p); break; \ - case 8: { \ - unsigned int __v1, __v2; \ - __v2 = __get_unaligned_4_be(__p); \ - __v1 = __get_unaligned_4_be((__p+4)); \ - __v = ((unsigned long long)__v2 << 32 | __v1); \ - } \ - break; \ - default: __v = __bug_unaligned_x(__p); break; \ - } \ - __v; \ +#define __get_unaligned_be(ptr) \ + ({ \ + const __u8 *__p = (const __u8 *)(ptr); \ + __builtin_choose_expr(sizeof(*(ptr)) == 1, *__p, \ + __builtin_choose_expr(sizeof(*(ptr)) == 2, __get_unaligned_2_be(__p), \ + __builtin_choose_expr(sizeof(*(ptr)) == 4, __get_unaligned_4_be(__p), \ + __builtin_choose_expr(sizeof(*(ptr)) == 8, __get_unaligned_8_be(__p), \ + (void)__bug_unaligned_x(__p))))); \ }) -- cgit v1.2.3 From e60d07b6cd38a7afb85f2cf51aebcb3359b63819 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 21 Sep 2006 02:42:12 +0100 Subject: [ARM] 3850/1: iop3xx: add thecus n2100 support Add support for the Thecus n2100 (80219-based.) Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/hardware.h | 1 + include/asm-arm/arch-iop32x/n2100.h | 19 +++++++++++++++++++ include/asm-arm/arch-iop32x/system.h | 11 +++++++++++ 3 files changed, 31 insertions(+) create mode 100644 include/asm-arm/arch-iop32x/n2100.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h index 6a3001f2f7e..c6f58b91ddb 100644 --- a/include/asm-arm/arch-iop32x/hardware.h +++ b/include/asm-arm/arch-iop32x/hardware.h @@ -37,6 +37,7 @@ void iop32x_init_irq(void); */ #include "iq80321.h" #include "iq31244.h" +#include "n2100.h" #endif diff --git a/include/asm-arm/arch-iop32x/n2100.h b/include/asm-arm/arch-iop32x/n2100.h new file mode 100644 index 00000000000..fed31a64842 --- /dev/null +++ b/include/asm-arm/arch-iop32x/n2100.h @@ -0,0 +1,19 @@ +/* + * include/asm/arch-iop32x/n2100.h + * + * Thecus N2100 board registers + */ + +#ifndef __N2100_H +#define __N2100_H + +#define N2100_UART 0xfe800000 /* UART */ + +#define N2100_COPY_BUTTON IOP3XX_GPIO_LINE(0) +#define N2100_PCA9532_RESET IOP3XX_GPIO_LINE(2) +#define N2100_RESET_BUTTON IOP3XX_GPIO_LINE(3) +#define N2100_HARDWARE_RESET IOP3XX_GPIO_LINE(4) +#define N2100_POWER_BUTTON IOP3XX_GPIO_LINE(5) + + +#endif diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h index c65ede3e627..17b7eb7e9c0 100644 --- a/include/asm-arm/arch-iop32x/system.h +++ b/include/asm-arm/arch-iop32x/system.h @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include + static inline void arch_idle(void) { cpu_do_idle(); @@ -15,6 +17,15 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { + local_irq_disable(); + + if (machine_is_n2100()) { + gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW); + gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT); + while (1) + ; + } + *IOP3XX_PCSR = 0x30; /* Jump into ROM at address 0 */ -- cgit v1.2.3 From 0c92e830bd39f3e6cf7b151dffecafbdc623496c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 21 Sep 2006 02:46:03 +0100 Subject: [ARM] 3851/1: iop3xx: add io-data glantank support Add support for the IO-Data GLAN Tank, from Martin Michlmayr. Signed-off-by: Martin Michlmayr Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/glantank.h | 13 +++++++++++++ include/asm-arm/arch-iop32x/hardware.h | 1 + 2 files changed, 14 insertions(+) create mode 100644 include/asm-arm/arch-iop32x/glantank.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-iop32x/glantank.h b/include/asm-arm/arch-iop32x/glantank.h new file mode 100644 index 00000000000..3b065618dd0 --- /dev/null +++ b/include/asm-arm/arch-iop32x/glantank.h @@ -0,0 +1,13 @@ +/* + * include/asm/arch-iop32x/glantank.h + * + * IO-Data GLAN Tank board registers + */ + +#ifndef __GLANTANK_H +#define __GLANTANK_H + +#define GLANTANK_UART 0xfe800000 /* UART */ + + +#endif diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h index c6f58b91ddb..6556ed5eee3 100644 --- a/include/asm-arm/arch-iop32x/hardware.h +++ b/include/asm-arm/arch-iop32x/hardware.h @@ -35,6 +35,7 @@ void iop32x_init_irq(void); /* * Board specific bits */ +#include "glantank.h" #include "iq80321.h" #include "iq31244.h" #include "n2100.h" -- cgit v1.2.3 From e7cc2c59cc83558fc26f17eee3c8f901119f0a7c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 21 Sep 2006 03:35:20 +0100 Subject: [ARM] 3852/1: convert atomic bitops and __xchg over to raw_local_irq_{save,restore} Thomas Gleixner noticed that bitops.h should also use the raw_* irq disable/enable variants, and __xchg needs them as well. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/bitops.h | 24 ++++++++++++------------ include/asm-arm/system.h | 8 ++++---- 2 files changed, 16 insertions(+), 16 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index 0ac54b1a8ba..b41831b6432 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -37,9 +37,9 @@ static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long * p += bit >> 5; - local_irq_save(flags); + raw_local_irq_save(flags); *p |= mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); } static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p) @@ -49,9 +49,9 @@ static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long p += bit >> 5; - local_irq_save(flags); + raw_local_irq_save(flags); *p &= ~mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); } static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p) @@ -61,9 +61,9 @@ static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned lon p += bit >> 5; - local_irq_save(flags); + raw_local_irq_save(flags); *p ^= mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); } static inline int @@ -75,10 +75,10 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) p += bit >> 5; - local_irq_save(flags); + raw_local_irq_save(flags); res = *p; *p = res | mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); return res & mask; } @@ -92,10 +92,10 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) p += bit >> 5; - local_irq_save(flags); + raw_local_irq_save(flags); res = *p; *p = res & ~mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); return res & mask; } @@ -109,10 +109,10 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) p += bit >> 5; - local_irq_save(flags); + raw_local_irq_save(flags); res = *p; *p = res ^ mask; - local_irq_restore(flags); + raw_local_irq_restore(flags); return res & mask; } diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 174ff52661b..c19c5b009f7 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -282,17 +282,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size #error SMP is not supported on this platform #endif case 1: - local_irq_save(flags); + raw_local_irq_save(flags); ret = *(volatile unsigned char *)ptr; *(volatile unsigned char *)ptr = x; - local_irq_restore(flags); + raw_local_irq_restore(flags); break; case 4: - local_irq_save(flags); + raw_local_irq_save(flags); ret = *(volatile unsigned long *)ptr; *(volatile unsigned long *)ptr = x; - local_irq_restore(flags); + raw_local_irq_restore(flags); break; #else case 1: -- cgit v1.2.3 From 93bda4c0214441b0bb03b61c2bf1d6727896a750 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 25 Sep 2006 12:41:22 +0300 Subject: ARM: OMAP: Added OMAP24xx camera IRQ definition Signed-off-by: Samuel Ortiz Signed-off-by: Juha Yrjola Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/irqs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 2542495d8a4..636f21cae3e 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -237,6 +237,7 @@ #define INT_24XX_SDMA_IRQ1 13 #define INT_24XX_SDMA_IRQ2 14 #define INT_24XX_SDMA_IRQ3 15 +#define INT_24XX_CAM_IRQ 24 #define INT_24XX_DSS_IRQ 25 #define INT_24XX_GPIO_BANK1 29 #define INT_24XX_GPIO_BANK2 30 -- cgit v1.2.3 From abc45e1d69542281fb2b40968e5d112f51976623 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 25 Sep 2006 12:41:25 +0300 Subject: ARM: OMAP: Apollon MMC support Apollon board MMC supports on OMAP2 TODO: We have to check MMC on H4 Signed-off-by: Kyungmin Park Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/irqs.h | 1 + include/asm-arm/arch-omap/mux.h | 14 ++++++++++++++ 2 files changed, 15 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 636f21cae3e..c5bb05a69b8 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -262,6 +262,7 @@ #define INT_24XX_UART1_IRQ 72 #define INT_24XX_UART2_IRQ 73 #define INT_24XX_UART3_IRQ 74 +#define INT_24XX_MMC_IRQ 83 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and * 16 MPUIO lines */ diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index 679869c5e68..a6df97c1183 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -461,6 +461,20 @@ enum omap24xx_index { K15_24XX_UART3_TX, K14_24XX_UART3_RX, + /* MMC/SDIO */ + G19_24XX_MMC_CLKO, + H18_24XX_MMC_CMD, + F20_24XX_MMC_DAT0, + H14_24XX_MMC_DAT1, + E19_24XX_MMC_DAT2, + D19_24XX_MMC_DAT3, + F19_24XX_MMC_DAT_DIR0, + E20_24XX_MMC_DAT_DIR1, + F18_24XX_MMC_DAT_DIR2, + E18_24XX_MMC_DAT_DIR3, + G18_24XX_MMC_CMD_DIR, + H15_24XX_MMC_CLKI, + /* Keypad GPIO*/ T19_24XX_KBR0, R19_24XX_KBR1, -- cgit v1.2.3 From 75a1d10e2f110380adaa9b993fd417537e2f85ba Mon Sep 17 00:00:00 2001 From: Mark Howell Date: Mon, 25 Sep 2006 12:41:29 +0300 Subject: ARM: OMAP: mux: add config for 16xx SPI pins This patch adds pin mux info for the SPI master/slave interface on OMAP16xx. Data from OMAP 1611/1612 TRM and errata. Works for me on my 1611/H2 with current git kernel. Signed-off-by: Mark Howell Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/mux.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index a6df97c1183..828cc5c114e 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -320,6 +320,17 @@ enum omap1xxx_index { P15_1610_UWIRE_CS3, N15_1610_UWIRE_CS1, + /* OMAP-1610 SPI */ + U19_1610_SPIF_SCK, + U18_1610_SPIF_DIN, + P20_1610_SPIF_DIN, + W21_1610_SPIF_DOUT, + R18_1610_SPIF_DOUT, + N14_1610_SPIF_CS0, + N15_1610_SPIF_CS1, + T19_1610_SPIF_CS2, + P15_1610_SPIF_CS3, + /* OMAP-1610 Flash */ L3_1610_FLASH_CS2B_OE, M8_1610_FLASH_CS2B_WE, -- cgit v1.2.3 From 2eaff915744b6c8db7770fa9e841fd1c0105fb0b Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Mon, 25 Sep 2006 12:41:31 +0300 Subject: ARM: OMAP: Add some extra #defines for Amstrad Delta This patch adds some further #defines regarding GPIOs and latch bits for the Amstrad Delta; the drivers that use them will be submitted at a later date but there's no reason not to have the information already there and available for use. Signed-off-by: Jonathan McDowell Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/board-ams-delta.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h index 0070f6d3b75..9aee15d9714 100644 --- a/include/asm-arm/arch-omap/board-ams-delta.h +++ b/include/asm-arm/arch-omap/board-ams-delta.h @@ -50,9 +50,20 @@ #define AMS_DELTA_LATCH2_NAND_NWE 0x0020 #define AMS_DELTA_LATCH2_NAND_ALE 0x0040 #define AMS_DELTA_LATCH2_NAND_CLE 0x0080 +#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 +#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 +#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 +#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 #define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 +#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 +#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 +#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 +#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 +#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 +#define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 #ifndef __ASSEMBLY__ -- cgit v1.2.3 From f37e4580c409e290f6e482007c3573cdb4470bf9 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Mon, 25 Sep 2006 12:41:33 +0300 Subject: ARM: OMAP2: Dynamic allocator for GPMC memory space Add support for assigning memory regions dynamically to peripherals attached to GPMC interface. Platform specific code should now call gpmc_cs_request to get a free GPMC memory region instead of using a fixed address. Make the H4 and Apollon platform initialization use the new API. Signed-off-by: Imre Deak Signed-off-by: Juha Yrjola Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/gpmc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h index 1a0a5207822..7c03ef6c14c 100644 --- a/include/asm-arm/arch-omap/gpmc.h +++ b/include/asm-arm/arch-omap/gpmc.h @@ -85,7 +85,7 @@ extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern unsigned long gpmc_cs_get_base_addr(int cs); - +extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); +extern void gpmc_cs_free(int cs); #endif -- cgit v1.2.3 From 123e9a5573098dbb10194c18d6d575620d0e94f3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Sep 2006 12:41:34 +0300 Subject: ARM: OMAP: DMA source and destination addresses are unsigned Also export some omap24xx specific DMA functions. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/dma.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index 1b1b02307e7..33cd48d9a85 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -338,13 +338,13 @@ struct omap_dma_channel_params { int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ int src_amode; /* constant , post increment, indexed , double indexed */ - int src_start; /* source address : physical */ + unsigned long src_start; /* source address : physical */ int src_ei; /* source element index */ int src_fi; /* source frame index */ int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ int dst_amode; /* constant , post increment, indexed , double indexed */ - int dst_start; /* source address : physical */ + unsigned long dst_start; /* source address : physical */ int dst_ei; /* source element index */ int dst_fi; /* source frame index */ -- cgit v1.2.3 From 12583a70ac6b6641905e37fdd61a7f711fb4ce2b Mon Sep 17 00:00:00 2001 From: Timo Teras Date: Mon, 25 Sep 2006 12:41:42 +0300 Subject: ARM: OMAP: Add enable/disable functions for dmtimer Add enable/disable functions which effectively control the GPT iclk and fclk. Signed-off-by: Timo Teras Signed-off-by: Juha Yrjola Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/dmtimer.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h index 7a289ff0740..b5f3a71b899 100644 --- a/include/asm-arm/arch-omap/dmtimer.h +++ b/include/asm-arm/arch-omap/dmtimer.h @@ -52,6 +52,8 @@ int omap_dm_timer_init(void); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); void omap_dm_timer_free(struct omap_dm_timer *timer); +void omap_dm_timer_enable(struct omap_dm_timer *timer); +void omap_dm_timer_disable(struct omap_dm_timer *timer); int omap_dm_timer_get_irq(struct omap_dm_timer *timer); -- cgit v1.2.3 From 709eb3e5ccb304dca011c41456da5ffd246d7271 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Sep 2006 12:45:45 +0300 Subject: ARM: OMAP: Sync DMA with linux-omap tree This patch syncs OMAP DMA code with linux-omap tree. Mostly allow changing DMA callback function and set OMAP2 specific transfer mode. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/dma.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index 33cd48d9a85..d591d0585bb 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -331,6 +331,12 @@ enum omap_dma_color_mode { OMAP_DMA_TRANSPARENT_COPY }; +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + struct omap_dma_channel_params { int data_type; /* data type 8,16,32 */ int elem_count; /* number of elements in a frame */ @@ -356,7 +362,7 @@ struct omap_dma_channel_params { }; -extern void omap_set_dma_priority(int dst_port, int priority); +extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (* callback)(int lch, u16 ch_status, void *data), void *data, int *dma_ch); @@ -371,6 +377,7 @@ extern void omap_set_dma_transfer_params(int lch, int data_type, int dma_trigger, int src_or_dst_synch); extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, unsigned long src_start, @@ -394,6 +401,9 @@ extern void omap_set_dma_params(int lch, extern void omap_dma_link_lch (int lch_head, int lch_queue); extern void omap_dma_unlink_lch (int lch_head, int lch_queue); +extern int omap_set_dma_callback(int lch, + void (* callback)(int lch, u16 ch_status, void *data), + void *data); extern dma_addr_t omap_get_dma_src_pos(int lch); extern dma_addr_t omap_get_dma_dst_pos(int lch); extern int omap_get_dma_src_addr_counter(int lch); -- cgit v1.2.3 From 90afd5cb2ac0977c38e83b6b21493da911b242b3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Sep 2006 13:27:20 +0300 Subject: ARM: OMAP: Sync clocks with linux-omap tree Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a patch from Imre Deak to make McSPI clocks use id. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/clock.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index f83003f5287..fa688104990 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -45,6 +45,7 @@ struct clk_functions { struct clk * (*clk_get_parent)(struct clk *clk); void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); }; extern unsigned int mpurate; -- cgit v1.2.3 From 4052ebb7a2729bd7c28260cdf8e470c0d81b9c56 Mon Sep 17 00:00:00 2001 From: "George G. Davis" Date: Fri, 22 Sep 2006 18:36:38 +0100 Subject: [ARM] 3859/1: Fix devicemaps_init() XIP_KERNEL odd 1MiB XIP_PHYS_ADDR translation error The ARM XIP_KERNEL map created in devicemaps_init() is wrong. The map.pfn is rounded down to an even 1MiB section boundary which results in va/pa translations errors when XIP_PHYS_ADDR starts on an odd 1MiB boundary and this causes the kernel to hang. This patch fixes ARM XIP_KERNEL translation errors for the odd 1MiB XIP_PHYS_ADDR boundary case. Signed-off-by: George G. Davis Signed-off-by: Russell King --- include/asm-arm/pgtable.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index 8d3919c6458..38b2b55688e 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -135,6 +135,13 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define FIRST_USER_PGD_NR 1 #define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR) +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 20 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + /* * ARMv6 supersection address mask and size definitions. */ -- cgit v1.2.3 From 456335e2072fb35bf290b45e61d51916c322c145 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Sep 2006 10:00:54 +0100 Subject: [ARM] Separate page table manipulation code from bootmem initialisation nommu does not require the page table manipulation code in the bootmem initialisation paths. Move this into separate inline functions. Signed-off-by: Russell King --- include/asm-arm/setup.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h index ea3ed246523..aa4b5782f0c 100644 --- a/include/asm-arm/setup.h +++ b/include/asm-arm/setup.h @@ -194,13 +194,15 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } # define NR_BANKS 8 #endif +struct membank { + unsigned long start; + unsigned long size; + int node; +}; + struct meminfo { int nr_banks; - struct { - unsigned long start; - unsigned long size; - int node; - } bank[NR_BANKS]; + struct membank bank[NR_BANKS]; }; /* -- cgit v1.2.3 From f12d0d7c7786af39435ef6ae9defe47fb58f6091 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Tue, 26 Sep 2006 17:36:37 +0900 Subject: [ARM] nommu: manage the CP15 things All the current CP15 access codes in ARM arch can be categorized and conditioned by the defines as follows: Related operation Safe condition a. any CP15 access !CPU_CP15 b. alignment trap CPU_CP15_MMU c. D-cache(C-bit) CPU_CP15 d. I-cache CPU_CP15 && !( CPU_ARM610 || CPU_ARM710 || CPU_ARM720 || CPU_ARM740 || CPU_XSCALE || CPU_XSC3 ) e. alternate vector CPU_CP15 && !CPU_ARM740 f. TTB CPU_CP15_MMU g. Domain CPU_CP15_MMU h. FSR/FAR CPU_CP15_MMU For example, alternate vector is supported if and only if "CPU_CP15 && !CPU_ARM740" is satisfied. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- include/asm-arm/system.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index c19c5b009f7..f05fbe31576 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -46,6 +46,7 @@ #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#ifdef CONFIG_CPU_CP15 #define read_cpuid(reg) \ ({ \ unsigned int __val; \ @@ -55,6 +56,9 @@ : "cc"); \ __val; \ }) +#else +#define read_cpuid(reg) (processor_id) +#endif /* * This is used to ensure the compiler did actually allocate the register we -- cgit v1.2.3 From 07e0da78abdc679714a12e7a60137d950c346681 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Tue, 26 Sep 2006 17:37:36 +0900 Subject: [ARM] nommu: add ARM7TDMI core support This patch adds ARM7TDMI core support which has no cache and no CP15 register(no memory control unit). Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 2 +- include/asm-arm/proc-fns.h | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index e4a2569c636..e7bfff298e4 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -33,7 +33,7 @@ # endif #endif -#if defined(CONFIG_CPU_ARM720T) +#if defined(CONFIG_CPU_ARM720T) || defined(CONFIG_CPU_ARM7TDMI) # ifdef _CACHE # define MULTI_CACHE 1 # else diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 1bde92cdaeb..3e8c057e66b 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -33,6 +33,14 @@ # define CPU_NAME cpu_arm6 # endif # endif +# ifdef CONFIG_CPU_ARM7TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7tdmi +# endif +# endif # ifdef CONFIG_CPU_ARM710 # ifdef CPU_NAME # undef MULTI_CPU -- cgit v1.2.3 From b731c3118d87f26c8bf3f358ffbbc24450af50a6 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Tue, 26 Sep 2006 17:37:50 +0900 Subject: [ARM] nommu: add ARM740T core support This patch adds ARM740T core support which has a MPU and 4KB or 8KB cache. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 3 ++- include/asm-arm/proc-fns.h | 8 ++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index e7bfff298e4..24924e64f88 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -25,7 +25,8 @@ #undef _CACHE #undef MULTI_CACHE -#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) +#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) || \ + defined(CONFIG_CPU_ARM740T) # ifdef _CACHE # define MULTI_CACHE 1 # else diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 3e8c057e66b..17dfc0de965 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -57,6 +57,14 @@ # define CPU_NAME cpu_arm720 # endif # endif +# ifdef CONFIG_CPU_ARM740T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm740 +# endif +# endif # ifdef CONFIG_CPU_ARM920T # ifdef CPU_NAME # undef MULTI_CPU -- cgit v1.2.3 From 43f5f0146ef5c3a3421ea53a0708fd37edcb8905 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Tue, 26 Sep 2006 17:38:05 +0900 Subject: [ARM] nommu: add ARM9TDMI core support This patch adds ARM9TDMI core support which has no cache and no CP15 register(no memory control unit). Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 3 ++- include/asm-arm/proc-fns.h | 8 ++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 24924e64f88..77ff6fe86db 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -34,7 +34,8 @@ # endif #endif -#if defined(CONFIG_CPU_ARM720T) || defined(CONFIG_CPU_ARM7TDMI) +#if defined(CONFIG_CPU_ARM720T) || defined(CONFIG_CPU_ARM7TDMI) || \ + defined(CONFIG_CPU_ARM9TDMI) # ifdef _CACHE # define MULTI_CACHE 1 # else diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 17dfc0de965..7bb9dab310f 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -65,6 +65,14 @@ # define CPU_NAME cpu_arm740 # endif # endif +# ifdef CONFIG_CPU_ARM9TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm9tdmi +# endif +# endif # ifdef CONFIG_CPU_ARM920T # ifdef CPU_NAME # undef MULTI_CPU -- cgit v1.2.3 From d60674eb5d961b2421db16cc373dc163f38cc105 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Tue, 26 Sep 2006 17:38:18 +0900 Subject: [ARM] nommu: add ARM940T core support This patch adds ARM940T core support which has 4KB D-cache, 4KB I-cache and a MPU. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 8 ++++++++ include/asm-arm/proc-fns.h | 8 ++++++++ 2 files changed, 16 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 77ff6fe86db..b0a8603400b 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -56,6 +56,14 @@ # endif #endif +#if defined(CONFIG_CPU_ARM940T) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm940 +# endif +#endif + #if defined(CONFIG_CPU_SA110) || defined(CONFIG_CPU_SA1100) # ifdef _CACHE # define MULTI_CACHE 1 diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 7bb9dab310f..87f3ea97f48 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -105,6 +105,14 @@ # define CPU_NAME cpu_arm926 # endif # endif +# ifdef CONFIG_CPU_ARM940T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm940 +# endif +# endif # ifdef CONFIG_CPU_SA110 # ifdef CPU_NAME # undef MULTI_CPU -- cgit v1.2.3 From f37f46eb1c0bd0b11c34ef06c7365658be989d80 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Tue, 26 Sep 2006 17:38:32 +0900 Subject: [ARM] nommu: add ARM946E-S core support This patch adds ARM946E-S core support which has typically 8KB I&D cache. It has a MPU and supports ARMv5TE instruction set. Because the ARM946E-S core can be synthesizable with various cache size, CONFIG_CPU_DCACHE_SIZE is defined for vendor specific configurations. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 8 ++++++++ include/asm-arm/proc-fns.h | 8 ++++++++ 2 files changed, 16 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index b0a8603400b..b611a8ea0bb 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -64,6 +64,14 @@ # endif #endif +#if defined(CONFIG_CPU_ARM946E) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm946 +# endif +#endif + #if defined(CONFIG_CPU_SA110) || defined(CONFIG_CPU_SA1100) # ifdef _CACHE # define MULTI_CACHE 1 diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 87f3ea97f48..ea7e54c319b 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -113,6 +113,14 @@ # define CPU_NAME cpu_arm940 # endif # endif +# ifdef CONFIG_CPU_ARM946E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm946 +# endif +# endif # ifdef CONFIG_CPU_SA110 # ifdef CPU_NAME # undef MULTI_CPU -- cgit v1.2.3 From 6cc7cbef948ea2660cc40d7aab090a479f7db6a2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Sep 2006 18:00:35 +0100 Subject: [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h Three of the generic cache method options were using explicit CPU types, whereas they could use the CPU_CACHE_* definitions instead. Switch them over to use the CPU_CACHE_* definitions. Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index b611a8ea0bb..f0845646aac 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -25,8 +25,7 @@ #undef _CACHE #undef MULTI_CACHE -#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) || \ - defined(CONFIG_CPU_ARM740T) +#if defined(CONFIG_CPU_CACHE_V3) # ifdef _CACHE # define MULTI_CACHE 1 # else @@ -34,8 +33,7 @@ # endif #endif -#if defined(CONFIG_CPU_ARM720T) || defined(CONFIG_CPU_ARM7TDMI) || \ - defined(CONFIG_CPU_ARM9TDMI) +#if defined(CONFIG_CPU_CACHE_V4) # ifdef _CACHE # define MULTI_CACHE 1 # else @@ -72,7 +70,7 @@ # endif #endif -#if defined(CONFIG_CPU_SA110) || defined(CONFIG_CPU_SA1100) +#if defined(CONFIG_CPU_CACHE_V4WB) # ifdef _CACHE # define MULTI_CACHE 1 # else -- cgit v1.2.3 From 8d48427ecb0639593ccf14e807479b7873254ccb Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 25 Sep 2006 20:11:48 +0100 Subject: [ARM] 3847/2: Convert LOMOMO to use struct device for GPIOs Convert LOMOMO to use struct device * for GPIOs instead of struct locomo_dev. This enables access to the GPIOs from code which is not a locomo device itself (such as audio). Access for gpio 31 is removed for error handling (no such hardware exists). Signed-off-by: Richard Purdie Signed-off-by: Russell King --- include/asm-arm/hardware/locomo.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h index 22dfb173776..2599a6bc70e 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/include/asm-arm/hardware/locomo.h @@ -197,10 +197,11 @@ int locomo_driver_register(struct locomo_driver *); void locomo_driver_unregister(struct locomo_driver *); /* GPIO control functions */ -void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir); -unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits); -unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits); -void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set); +void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); +int locomo_gpio_read_level(struct device *dev, unsigned int bits); +int locomo_gpio_read_output(struct device *dev, unsigned int bits); +void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); + /* M62332 control function */ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); -- cgit v1.2.3 From a2025e7f73ae5eab0a25dad88c60aba67e3ae690 Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Mon, 25 Sep 2006 22:41:47 +0100 Subject: [ARM] 3863/1: Add Locomo SPI Device The Locomo chip has a SPI interface which is used for SD/MMC cards (only collie). This patch adds the definition for the SPI device inside the Locomo chip. Signed-off-by: Dirk Opfer Signed-off-by: Russell King --- include/asm-arm/hardware/locomo.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h index 2599a6bc70e..adab77780ed 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/include/asm-arm/hardware/locomo.h @@ -54,17 +54,18 @@ #define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ /* SPI interface */ -#define LOCOMO_SPIMD 0x60 /* SPI mode setting */ -#define LOCOMO_SPICT 0x64 /* SPI mode control */ -#define LOCOMO_SPIST 0x68 /* SPI status */ -#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */ -#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */ -#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */ -#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */ -#define LOCOMO_SPITD 0x80 /* SPI transfer data write */ -#define LOCOMO_SPIRD 0x84 /* SPI receive data read */ -#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */ -#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */ +#define LOCOMO_SPI 0x60 +#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ +#define LOCOMO_SPICT 0x04 /* SPI mode control */ +#define LOCOMO_SPIST 0x08 /* SPI status */ +#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ +#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ #define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ #define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */ #define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ @@ -161,6 +162,7 @@ extern struct bus_type locomo_bus_type; #define LOCOMO_DEVID_AUDIO 3 #define LOCOMO_DEVID_LED 4 #define LOCOMO_DEVID_UART 5 +#define LOCOMO_DEVID_SPI 6 struct locomo_dev { struct device dev; -- cgit v1.2.3 From 576b3ef2495c732a56509febd5de5144f3ebccf6 Mon Sep 17 00:00:00 2001 From: Dirk Opfer Date: Mon, 25 Sep 2006 22:51:02 +0100 Subject: [ARM] 3864/1: Refactore sharpsl_pm This patch adds another hook into sharpsl_pm to notify the machine specific driver immediately after resume. This is needed to support the Sharp SL-6000 (Tosa). Signed-off-by: Dirk Opfer Signed-off-by: Russell King --- include/asm-arm/hardware/sharpsl_pm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h index ecf15b83956..a836e76a14f 100644 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ b/include/asm-arm/hardware/sharpsl_pm.h @@ -25,6 +25,7 @@ struct sharpsl_charger_machinfo { void (*measure_temp)(int); void (*presuspend)(void); void (*postsuspend)(void); + void (*earlyresume)(void); unsigned long (*read_devdata)(int); #define SHARPSL_BATT_VOLT 1 #define SHARPSL_BATT_TEMP 2 -- cgit v1.2.3 From 72729910c38ca5b4736032c15dc3f9d48fe4f68a Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 27 Sep 2006 09:44:11 +0100 Subject: [ARM] 3865/1: AT91RM9200 header updates This is more preparation for adding support for the new Atmel AT91SAM9 processors. Changes include: - Replace AT91_BASE_* with AT91RM9200_BASE_* - Replace AT91_ID_* with AT91RM9200_ID_* - ROM, SRAM and UHP address definitions moved to at91rm9200.h. - The raw AT91_P[ABCD]_* definitions are now depreciated in favour of the GPIO API. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/at91rm9200.h | 118 +++++++++++++++------------ include/asm-arm/arch-at91rm9200/gpio.h | 2 +- include/asm-arm/arch-at91rm9200/hardware.h | 37 ++++----- include/asm-arm/arch-at91rm9200/irqs.h | 2 +- 4 files changed, 83 insertions(+), 76 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h index 58f40931a5c..a5a86b1ff88 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -19,66 +19,79 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ -#define AT91_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91_ID_US0 6 /* USART 0 */ -#define AT91_ID_US1 7 /* USART 1 */ -#define AT91_ID_US2 8 /* USART 2 */ -#define AT91_ID_US3 9 /* USART 3 */ -#define AT91_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91_ID_UDP 11 /* USB Device Port */ -#define AT91_ID_TWI 12 /* Two-Wire Interface */ -#define AT91_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91_ID_TC0 17 /* Timer Counter 0 */ -#define AT91_ID_TC1 18 /* Timer Counter 1 */ -#define AT91_ID_TC2 19 /* Timer Counter 2 */ -#define AT91_ID_TC3 20 /* Timer Counter 3 */ -#define AT91_ID_TC4 21 /* Timer Counter 4 */ -#define AT91_ID_TC5 22 /* Timer Counter 5 */ -#define AT91_ID_UHP 23 /* USB Host port */ -#define AT91_ID_EMAC 24 /* Ethernet MAC */ -#define AT91_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ -#define AT91_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ -#define AT91_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ -#define AT91_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ -#define AT91_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripheral */ +#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ +#define AT91RM9200_ID_US0 6 /* USART 0 */ +#define AT91RM9200_ID_US1 7 /* USART 1 */ +#define AT91RM9200_ID_US2 8 /* USART 2 */ +#define AT91RM9200_ID_US3 9 /* USART 3 */ +#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ +#define AT91RM9200_ID_UDP 11 /* USB Device Port */ +#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ +#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ +#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ +#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ +#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ +#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ +#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ +#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ +#define AT91RM9200_ID_UHP 23 /* USB Host port */ +#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ +#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ +#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ +#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ +#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ +#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ /* * Peripheral physical base addresses. */ -#define AT91_BASE_TCB0 0xfffa0000 -#define AT91_BASE_TC0 0xfffa0000 -#define AT91_BASE_TC1 0xfffa0040 -#define AT91_BASE_TC2 0xfffa0080 -#define AT91_BASE_TCB1 0xfffa4000 -#define AT91_BASE_TC3 0xfffa4000 -#define AT91_BASE_TC4 0xfffa4040 -#define AT91_BASE_TC5 0xfffa4080 -#define AT91_BASE_UDP 0xfffb0000 -#define AT91_BASE_MCI 0xfffb4000 -#define AT91_BASE_TWI 0xfffb8000 -#define AT91_BASE_EMAC 0xfffbc000 -#define AT91_BASE_US0 0xfffc0000 -#define AT91_BASE_US1 0xfffc4000 -#define AT91_BASE_US2 0xfffc8000 -#define AT91_BASE_US3 0xfffcc000 -#define AT91_BASE_SSC0 0xfffd0000 -#define AT91_BASE_SSC1 0xfffd4000 -#define AT91_BASE_SSC2 0xfffd8000 -#define AT91_BASE_SPI 0xfffe0000 +#define AT91RM9200_BASE_TCB0 0xfffa0000 +#define AT91RM9200_BASE_TC0 0xfffa0000 +#define AT91RM9200_BASE_TC1 0xfffa0040 +#define AT91RM9200_BASE_TC2 0xfffa0080 +#define AT91RM9200_BASE_TCB1 0xfffa4000 +#define AT91RM9200_BASE_TC3 0xfffa4000 +#define AT91RM9200_BASE_TC4 0xfffa4040 +#define AT91RM9200_BASE_TC5 0xfffa4080 +#define AT91RM9200_BASE_UDP 0xfffb0000 +#define AT91RM9200_BASE_MCI 0xfffb4000 +#define AT91RM9200_BASE_TWI 0xfffb8000 +#define AT91RM9200_BASE_EMAC 0xfffbc000 +#define AT91RM9200_BASE_US0 0xfffc0000 +#define AT91RM9200_BASE_US1 0xfffc4000 +#define AT91RM9200_BASE_US2 0xfffc8000 +#define AT91RM9200_BASE_US3 0xfffcc000 +#define AT91RM9200_BASE_SSC0 0xfffd0000 +#define AT91RM9200_BASE_SSC1 0xfffd4000 +#define AT91RM9200_BASE_SSC2 0xfffd8000 +#define AT91RM9200_BASE_SPI 0xfffe0000 #define AT91_BASE_SYS 0xfffff000 +/* + * Internal Memory. + */ +#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ +#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ + +#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ + + +#if 0 /* * PIO pin definitions (peripheral A/B multiplexing). */ @@ -257,5 +270,6 @@ #define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */ #define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */ #define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */ +#endif #endif diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index dbde1baaf25..6243f28a0b8 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -20,7 +20,7 @@ #define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ #define BGA_GPIO_BANKS 4 /* BGA package has 4 banks */ -/* these pin numbers double as IRQ numbers, like AT91_ID_* values */ +/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ #define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) #define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 235d39d9110..878e65f369b 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -34,27 +34,23 @@ * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91_BASE_SPI) -#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91_BASE_SSC2) -#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91_BASE_SSC1) -#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91_BASE_SSC0) -#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91_BASE_US3) -#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91_BASE_US2) -#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91_BASE_US1) -#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91_BASE_US0) -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91_BASE_EMAC) -#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91_BASE_TWI) -#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91_BASE_MCI) -#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91_BASE_UDP) -#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91_BASE_TCB1) -#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0) - -/* Internal SRAM */ -#define AT91_SRAM_BASE 0x00200000 /* Internal SRAM base address */ -#define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */ +#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI) +#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91RM9200_BASE_SSC2) +#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91RM9200_BASE_SSC1) +#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91RM9200_BASE_SSC0) +#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91RM9200_BASE_US3) +#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91RM9200_BASE_US2) +#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91RM9200_BASE_US1) +#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91RM9200_BASE_US0) +#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) +#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI) +#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI) +#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP) +#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91RM9200_BASE_TCB1) +#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91RM9200_BASE_TCB0) /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) +#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) /* Serial ports */ #define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ @@ -71,9 +67,6 @@ /* Compact Flash */ #define AT91_CF_BASE 0x50000000 /* NCS4-NCS6: Compact Flash physical base address */ -/* Multi-Master Memory controller */ -#define AT91_UHP_BASE 0x00300000 /* USB Host controller */ - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index f63842c2c09..763cb96c418 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -32,7 +32,7 @@ /* - * IRQ interrupt symbols are the AT91_ID_* symbols in at91rm9200.h + * IRQ interrupt symbols are the AT91xxx_ID_* symbols * for IRQs handled directly through the AIC, or else the AT91_PIN_* * symbols in gpio.h for ones handled indirectly as GPIOs. * We make provision for 4 banks of GPIO. -- cgit v1.2.3 From f21738341ca330ec83ef978ee63ffa5ecf13f082 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 27 Sep 2006 13:23:00 +0100 Subject: [ARM] 3867/1: AT91 GPIO update This patch makes the AT91 gpio.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The GPIO controllers supported by a particular AT91 processor are defined in the processor-specific file and are registered with gpio.c at startup. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/gpio.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index 6243f28a0b8..a011d27876a 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -17,8 +17,7 @@ #define PIN_BASE NR_AIC_IRQS -#define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ -#define BGA_GPIO_BANKS 4 /* BGA package has 4 banks */ +#define MAX_GPIO_BANKS 4 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ @@ -180,17 +179,18 @@ #ifndef __ASSEMBLY__ /* setup setup routines, called from board init or driver probe() */ -extern int at91_set_A_periph(unsigned pin, int use_pullup); -extern int at91_set_B_periph(unsigned pin, int use_pullup); -extern int at91_set_gpio_input(unsigned pin, int use_pullup); -extern int at91_set_gpio_output(unsigned pin, int value); -extern int at91_set_deglitch(unsigned pin, int is_on); -extern int at91_set_multi_drive(unsigned pin, int is_on); +extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); +extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); +extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); extern int at91_get_gpio_value(unsigned pin); +/* callable only from core power-management code */ extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); #endif -- cgit v1.2.3 From 97f0fb68f142b477773c05140da27c1dbd31a2ab Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 27 Sep 2006 16:18:18 +0100 Subject: [ARM] 3868/1: AT91 hardware header update This patch adds the hardware register definitions for the TWI (I2C) controller found on the AT91RM9200 and AT91SAM9xx processors. It also defines the AIC Fast-Forcing registers added to the AT91SAM9's. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/at91rm9200_sys.h | 3 ++ include/asm-arm/arch-at91rm9200/at91rm9200_twi.h | 57 ++++++++++++++++++++++++ 2 files changed, 60 insertions(+) create mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_twi.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h index 0f4c12d5f0c..73693fea76a 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h @@ -80,6 +80,9 @@ #define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ #define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ +#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ /* * PIO Controllers. diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h b/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h new file mode 100644 index 00000000000..93547d7482b --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h @@ -0,0 +1,57 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_twi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Two-wire Interface (TWI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_TWI_H +#define AT91RM9200_TWI_H + +#define AT91_TWI_CR 0x00 /* Control Register */ +#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ +#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ +#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ +#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ +#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ + +#define AT91_TWI_MMR 0x04 /* Master Mode Register */ +#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ +#define AT91_TWI_IADRSZ_NO (0 << 8) +#define AT91_TWI_IADRSZ_1 (1 << 8) +#define AT91_TWI_IADRSZ_2 (2 << 8) +#define AT91_TWI_IADRSZ_3 (3 << 8) +#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ +#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ + +#define AT91_TWI_IADR 0x0c /* Internal Address Register */ + +#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ +#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ +#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ +#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ + +#define AT91_TWI_SR 0x20 /* Status Register */ +#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ +#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ +#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ +#define AT91_TWI_OVRE (1 << 6) /* Overrun Error */ +#define AT91_TWI_UNRE (1 << 7) /* Underrun Error */ +#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ + +#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ +#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ +#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ +#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ + +#endif + -- cgit v1.2.3 From 1f51c10c5e85050506663bce1d69513eb901db87 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Thu, 28 Sep 2006 16:26:47 +0100 Subject: [ARM] 3870/1: AT91: Start removing static memory mappings This patch removes the static memory mapping for the currently-unused peripherals [Synchronous Serial, Timer/Counter unit], and for those drivers that already ioremap() their registers [UART]. Also, the Ethernet driver now uses the platform_device resources but doesn't yet use ioremap() so we need to pass it the virtual address instead of the physical address. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/hardware.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 878e65f369b..6551b4d1ff7 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -35,19 +35,10 @@ */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) #define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI) -#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91RM9200_BASE_SSC2) -#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91RM9200_BASE_SSC1) -#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91RM9200_BASE_SSC0) -#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91RM9200_BASE_US3) -#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91RM9200_BASE_US2) -#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91RM9200_BASE_US1) -#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91RM9200_BASE_US0) #define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) #define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI) #define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI) #define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP) -#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91RM9200_BASE_TCB1) -#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91RM9200_BASE_TCB0) /* Internal SRAM is mapped below the IO devices */ #define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) -- cgit v1.2.3 From 746140c71d537560bbd22c1b148fb21031c30e71 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 22 Sep 2006 00:16:30 +0100 Subject: [ARM] 3855/1: Add generic time support This patch adds Generic time-of-day support for the ARM architecture. The support is currently added using #ifdef's so that it can support sub-arches that do not (yet) have a clocksource added. As sub-arches add clocksource support, they should 'select GENERIC_TIME' Signed-off-by: Deepak Saxena Signed-off-by: Daniel Walker Signed-off-by: Kevin Hilman Acked-by: John Stultz Signed-off-by: Russell King --- include/asm-arm/mach/time.h | 2 ++ include/asm-arm/timeofday.h | 4 ++++ 2 files changed, 6 insertions(+) create mode 100644 include/asm-arm/timeofday.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h index dee0bc336fe..1eb93f5c0d6 100644 --- a/include/asm-arm/mach/time.h +++ b/include/asm-arm/mach/time.h @@ -38,7 +38,9 @@ struct sys_timer { void (*init)(void); void (*suspend)(void); void (*resume)(void); +#ifndef CONFIG_GENERIC_TIME unsigned long (*offset)(void); +#endif #ifdef CONFIG_NO_IDLE_HZ struct dyn_tick_timer *dyn_tick; diff --git a/include/asm-arm/timeofday.h b/include/asm-arm/timeofday.h new file mode 100644 index 00000000000..27254bd5b94 --- /dev/null +++ b/include/asm-arm/timeofday.h @@ -0,0 +1,4 @@ +#ifndef _ASM_ARM_TIMEOFDAY_H +#define _ASM_ARM_TIMEOFDAY_H +#include +#endif -- cgit v1.2.3 From 84904d0ead0a8c419abd45c7b2ac8d76d50a0d48 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 22 Sep 2006 00:58:57 +0100 Subject: [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms Enables the ixp4xx platforms to use Generic time-of-day. Signed-off-by: Kevin Hilman Acked-by: John Stultz Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp4xx/platform.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index 13aee17b047..8d10a918769 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -89,6 +89,11 @@ struct ixp4xx_i2c_pins { struct sys_timer; +/* + * Frequency of clock used for primary clocksource + */ +extern unsigned long ixp4xx_timer_freq; + /* * Functions used by platform-level setup code */ -- cgit v1.2.3