From 5f97f7f9400de47ae837170bb274e90ad3934386 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 25 Sep 2006 23:32:13 -0700 Subject: [PATCH] avr32 architecture This adds support for the Atmel AVR32 architecture as well as the AT32AP7000 CPU and the AT32STK1000 development board. AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for cost-sensitive embedded applications, with particular emphasis on low power consumption and high code density. The AVR32 architecture is not binary compatible with earlier 8-bit AVR architectures. The AVR32 architecture, including the instruction set, is described by the AVR32 Architecture Manual, available from http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It features a 7-stage pipeline, 16KB instruction and data caches and a full Memory Management Unit. It also comes with a large set of integrated peripherals, many of which are shared with the AT91 ARM-based controllers from Atmel. Full data sheet is available from http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf while the CPU core implementation including caches and MMU is documented by the AVR32 AP Technical Reference, available from http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf Information about the AT32STK1000 development board can be found at http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918 including a BSP CD image with an earlier version of this patch, development tools (binaries and source/patches) and a root filesystem image suitable for booting from SD card. Alternatively, there's a preliminary "getting started" guide available at http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links to the sources and patches you will need in order to set up a cross-compiling environment for avr32-linux. This patch, as well as the other patches included with the BSP and the toolchain patches, is actively supported by Atmel Corporation. [dmccr@us.ibm.com: Fix more pxx_page macro locations] [bunk@stusta.de: fix `make defconfig'] Signed-off-by: Haavard Skinnemoen Signed-off-by: Adrian Bunk Signed-off-by: Dave McCracken Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-avr32/bitops.h | 296 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 296 insertions(+) create mode 100644 include/asm-avr32/bitops.h (limited to 'include/asm-avr32/bitops.h') diff --git a/include/asm-avr32/bitops.h b/include/asm-avr32/bitops.h new file mode 100644 index 00000000000..5299f8c8e11 --- /dev/null +++ b/include/asm-avr32/bitops.h @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_BITOPS_H +#define __ASM_AVR32_BITOPS_H + +#include +#include + +/* + * clear_bit() doesn't provide any barrier for the compiler + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/* + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void set_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long tmp; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " sbr %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "i"(nr) + : "cc"); + } else { + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " or %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "r"(mask) + : "cc"); + } +} + +/* + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static inline void clear_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long tmp; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " cbr %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "i"(nr) + : "cc"); + } else { + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " andn %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "r"(mask) + : "cc"); + } +} + +/* + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void change_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp; + + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " eor %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "r"(mask) + : "cc"); +} + +/* + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp, old; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %3\n" + " mov %2, %0\n" + " sbr %0, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "i"(nr) + : "memory", "cc"); + } else { + asm volatile( + "1: ssrf 5\n" + " ld.w %2, %3\n" + " or %0, %2, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "r"(mask) + : "memory", "cc"); + } + + return (old & mask) != 0; +} + +/* + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp, old; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %3\n" + " mov %2, %0\n" + " cbr %0, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "i"(nr) + : "memory", "cc"); + } else { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %3\n" + " mov %2, %0\n" + " andn %0, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "r"(mask) + : "memory", "cc"); + } + + return (old & mask) != 0; +} + +/* + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_change_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp, old; + + asm volatile( + "1: ssrf 5\n" + " ld.w %2, %3\n" + " eor %0, %2, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "r"(mask) + : "memory", "cc"); + + return (old & mask) != 0; +} + +#include + +/* Find First bit Set */ +static inline unsigned long __ffs(unsigned long word) +{ + unsigned long result; + + asm("brev %1\n\t" + "clz %0,%1" + : "=r"(result), "=&r"(word) + : "1"(word)); + return result; +} + +/* Find First Zero */ +static inline unsigned long ffz(unsigned long word) +{ + return __ffs(~word); +} + +/* Find Last bit Set */ +static inline int fls(unsigned long word) +{ + unsigned long result; + + asm("clz %0,%1" : "=r"(result) : "r"(word)); + return 32 - result; +} + +unsigned long find_first_zero_bit(const unsigned long *addr, + unsigned long size); +unsigned long find_next_zero_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); +unsigned long find_first_bit(const unsigned long *addr, + unsigned long size); +unsigned long find_next_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + * + * The difference is that bit numbering starts at 1, and if no bit is set, + * the function returns 0. + */ +static inline int ffs(unsigned long word) +{ + if(word == 0) + return 0; + return __ffs(word) + 1; +} + +#include +#include +#include + +#include +#include +#include + +#endif /* __ASM_AVR32_BITOPS_H */ -- cgit v1.2.3