From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-i386/io.h | 381 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 381 insertions(+) create mode 100644 include/asm-i386/io.h (limited to 'include/asm-i386/io.h') diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h new file mode 100644 index 00000000000..7babb97a02e --- /dev/null +++ b/include/asm-i386/io.h @@ -0,0 +1,381 @@ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include +#include +#include + +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo + */ + +#define IO_SPACE_LIMIT 0xffff + +#define XQUAD_PORTIO_BASE 0xfe400000 +#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ + +#ifdef __KERNEL__ + +#include + +#include + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa(address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline void * phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) + +extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); + +/** + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + */ + +static inline void __iomem * ioremap(unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size, 0); +} + +extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size); +extern void iounmap(volatile void __iomem *addr); + +/* + * bt_ioremap() and bt_iounmap() are for temporary early boot-time + * mappings, before the real ioremap() is functional. + * A boot-time mapping is currently limited to at most 16 pages. + */ +extern void *bt_ioremap(unsigned long offset, unsigned long size); +extern void bt_iounmap(void *addr, unsigned long size); + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +#define isa_virt_to_bus virt_to_phys +#define isa_page_to_bus page_to_phys +#define isa_bus_to_virt phys_to_virt + +/* + * However PCI ones are not necessarily 1:1 and therefore these interfaces + * are forbidden in portable PCI drivers. + * + * Allow them on x86 for legacy drivers, though. + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the x86 architecture, we just read/write the + * memory location directly. + */ + +static inline unsigned char readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *) addr; +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *) addr; +} +static inline unsigned int readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *) addr; +} +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +static inline void writeb(unsigned char b, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *) addr = b; +} +static inline void writew(unsigned short b, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *) addr = b; +} +static inline void writel(unsigned int b, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *) addr = b; +} +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define mmiowb() + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + __memcpy(dst, (void __force *) src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + __memcpy((void __force *) dst, src, count); +} + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) + +#define isa_readb(a) readb(__ISA_IO_base + (a)) +#define isa_readw(a) readw(__ISA_IO_base + (a)) +#define isa_readl(a) readl(__ISA_IO_base + (a)) +#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a)) +#define isa_writew(w,a) writew(w,__ISA_IO_base + (a)) +#define isa_writel(l,a) writel(l,__ISA_IO_base + (a)) +#define isa_memset_io(a,b,c) memset_io(__ISA_IO_base + (a),(b),(c)) +#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c)) +#define isa_memcpy_toio(a,b,c) memcpy_toio(__ISA_IO_base + (a),(b),(c)) + + +/* + * Again, i386 does not require mem IO specific function. + */ + +#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d)) +#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(__ISA_IO_base + (b)),(c),(d)) + +/** + * check_signature - find BIOS signatures + * @io_addr: mmio address to check + * @signature: signature block + * @length: length of signature + * + * Perform a signature comparison with the mmio address io_addr. This + * address should have been obtained by ioremap. + * Returns 1 on a match. + */ + +static inline int check_signature(volatile void __iomem * io_addr, + const unsigned char *signature, int length) +{ + int retval = 0; + do { + if (readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} + +/* + * Cache management + * + * This needed for two cases + * 1. Out of order aware processors + * 2. Accidentally out of order processors (PPro errata #51) + */ + +#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) + +static inline void flush_write_buffers(void) +{ + __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory"); +} + +#define dma_cache_inv(_start,_size) flush_write_buffers() +#define dma_cache_wback(_start,_size) flush_write_buffers() +#define dma_cache_wback_inv(_start,_size) flush_write_buffers() + +#else + +/* Nothing to do */ + +#define dma_cache_inv(_start,_size) do { } while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { } while (0) +#define flush_write_buffers() + +#endif + +#endif /* __KERNEL__ */ + +#ifdef SLOW_IO_BY_JUMPING +#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:" +#else +#define __SLOW_DOWN_IO "outb %%al,$0x80;" +#endif + +static inline void slow_down_io(void) { + __asm__ __volatile__( + __SLOW_DOWN_IO +#ifdef REALLY_SLOW_IO + __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO +#endif + : : ); +} + +#ifdef CONFIG_X86_NUMAQ +extern void *xquad_portio; /* Where the IO area was mapped */ +#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) +#define __BUILDIO(bwl,bw,type) \ +static inline void out##bwl##_quad(unsigned type value, int port, int quad) { \ + if (xquad_portio) \ + write##bwl(value, XQUAD_PORT_ADDR(port, quad)); \ + else \ + out##bwl##_local(value, port); \ +} \ +static inline void out##bwl(unsigned type value, int port) { \ + out##bwl##_quad(value, port, 0); \ +} \ +static inline unsigned type in##bwl##_quad(int port, int quad) { \ + if (xquad_portio) \ + return read##bwl(XQUAD_PORT_ADDR(port, quad)); \ + else \ + return in##bwl##_local(port); \ +} \ +static inline unsigned type in##bwl(int port) { \ + return in##bwl##_quad(port, 0); \ +} +#else +#define __BUILDIO(bwl,bw,type) \ +static inline void out##bwl(unsigned type value, int port) { \ + out##bwl##_local(value, port); \ +} \ +static inline unsigned type in##bwl(int port) { \ + return in##bwl##_local(port); \ +} +#endif + + +#define BUILDIO(bwl,bw,type) \ +static inline void out##bwl##_local(unsigned type value, int port) { \ + __asm__ __volatile__("out" #bwl " %" #bw "0, %w1" : : "a"(value), "Nd"(port)); \ +} \ +static inline unsigned type in##bwl##_local(int port) { \ + unsigned type value; \ + __asm__ __volatile__("in" #bwl " %w1, %" #bw "0" : "=a"(value) : "Nd"(port)); \ + return value; \ +} \ +static inline void out##bwl##_local_p(unsigned type value, int port) { \ + out##bwl##_local(value, port); \ + slow_down_io(); \ +} \ +static inline unsigned type in##bwl##_local_p(int port) { \ + unsigned type value = in##bwl##_local(port); \ + slow_down_io(); \ + return value; \ +} \ +__BUILDIO(bwl,bw,type) \ +static inline void out##bwl##_p(unsigned type value, int port) { \ + out##bwl(value, port); \ + slow_down_io(); \ +} \ +static inline unsigned type in##bwl##_p(int port) { \ + unsigned type value = in##bwl(port); \ + slow_down_io(); \ + return value; \ +} \ +static inline void outs##bwl(int port, const void *addr, unsigned long count) { \ + __asm__ __volatile__("rep; outs" #bwl : "+S"(addr), "+c"(count) : "d"(port)); \ +} \ +static inline void ins##bwl(int port, void *addr, unsigned long count) { \ + __asm__ __volatile__("rep; ins" #bwl : "+D"(addr), "+c"(count) : "d"(port)); \ +} + +BUILDIO(b,b,char) +BUILDIO(w,w,short) +BUILDIO(l,,int) + +#endif -- cgit v1.2.3