From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-mips/mach-ev64120/mach-gt64120.h | 61 ++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 include/asm-mips/mach-ev64120/mach-gt64120.h (limited to 'include/asm-mips/mach-ev64120/mach-gt64120.h') diff --git a/include/asm-mips/mach-ev64120/mach-gt64120.h b/include/asm-mips/mach-ev64120/mach-gt64120.h new file mode 100644 index 00000000000..13b1443a7a6 --- /dev/null +++ b/include/asm-mips/mach-ev64120/mach-gt64120.h @@ -0,0 +1,61 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef __ASM_GALILEO_BOARDS_MIPS_EV64120_H +#define __ASM_GALILEO_BOARDS_MIPS_EV64120_H + +/* + * GT64120 config space base address + */ +extern unsigned long gt64120_base; + +#define GT64120_BASE (gt64120_base) + +/* + * PCI Bus allocation + */ +#define GT_PCI_MEM_BASE 0x12000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_IO_BASE 0x10000000UL +#define GT_PCI_IO_SIZE 0x02000000UL +#define GT_ISA_IO_BASE PCI_IO_BASE + +/* + * Duart I/O ports. + */ +#define EV64120_COM1_BASE_ADDR (0x1d000000 + 0x20) +#define EV64120_COM2_BASE_ADDR (0x1d000000 + 0x00) + + +/* + * EV64120 interrupt controller register base. + */ +#define EV64120_ICTRL_REGS_BASE (KSEG1ADDR(0x1f000000)) + +/* + * EV64120 UART register base. + */ +#define EV64120_UART0_REGS_BASE (KSEG1ADDR(EV64120_COM1_BASE_ADDR)) +#define EV64120_UART1_REGS_BASE (KSEG1ADDR(EV64120_COM2_BASE_ADDR)) +#define EV64120_BASE_BAUD ( 3686400 / 16 ) + +/* + * PCI interrupts will come in on either the INTA or INTD interrups lines, + * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our + * boards, they all either come in on IntD or they all come in on IntA, they + * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the + * "requested" interrupt numbers and go through the list whenever we get an + * IntA/D. + * + * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and + * INTD is 11. + */ +#define GT_TIMER 4 +#define GT_INTA 2 +#define GT_INTD 5 + +#endif /* __ASM_GALILEO_BOARDS_MIPS_EV64120_H */ -- cgit v1.2.3