From c3d1d5c8c10c937c65186f6dac75e2fb4675ef07 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 30 Apr 2008 23:29:04 +0400 Subject: [MIPS] Pb1200/DBAu1200 code style cleanup Fix several errors and warnings given by checkpatch.pl: - use of C99 // comments; - initialization of a 'static' variable to 0; - space after opening and before closing parentheses; - missing space between 'for' and opening parenthesis; - macros with complex values not enclosed in parentheses; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used; - line over 80 characters. In addition to these changes, also do the following: - mention DBAu1200 board in the Makefile; - replace the group of #include/#ifdef directives by a single #include since this header contains the needed stuff; - properly indent the blocks; - insert spaces between operator and its operands, remove excess spaces there; - remove needless parentheses and add some for clarity; - replace numeric literals/expressions with the matching macros; - remove space after the type cast's closing parenthesis; - reduce pb1200_setup_cascade() to the single 'return' statement; - reduce the number of printed empty lines in the so-called CPLD workaround; - remove #undef AU1X00_EXTERNAL_INT since that macro is not defined anywhere; - replace spaces after the macro name with tabs in the #define directives; - remove excess tabs after the macro name in the #define directives; - fix typo in the BCSR_RESETS_PWMR1mUX macro's name; - group all Pb1200 PCMCIA definitions together; - put the function's result type and name/parameters on the same line; - insert missing and remove excess new lines; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line and/or adding space/asterisk on their left side; - fix typos/errors, capitalize acronyms, etc. in the comments; - combine some comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- include/asm-mips/mach-db1x00/db1200.h | 73 +++++++++++++-------------- include/asm-mips/mach-pb1x00/pb1200.h | 93 +++++++++++++++++------------------ 2 files changed, 81 insertions(+), 85 deletions(-) (limited to 'include/asm-mips') diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index eedd048a726..27f26102b1b 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -1,6 +1,6 @@ /* - * AMD Alchemy DB1200 Referrence Board - * Board Registers defines. + * AMD Alchemy DBAu1200 Reference Board + * Board register defines. * * ######################################################################## * @@ -27,26 +27,25 @@ #include #include -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC'97 and I2S are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define AC97_PSC_BASE PSC1_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xB9800000 +#define BCSR_KSEG1_ADDR 0xB9800000 typedef volatile struct { @@ -102,9 +101,9 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -122,8 +121,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 #define BCSR_RESETS_TV 0x0010 -/* not resets but in the same register */ -#define BCSR_RESETS_PWMR1mUX 0x0800 +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 @@ -160,7 +159,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -179,10 +178,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x20000000 +#define NAND_PHYS_ADDR 0x20000000 /* - * External Interrupts for Pb1200 as of 8/6/2004. + * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking * the interrupt define and subtracting the DB1200_INT_BEGIN value. * @@ -211,23 +210,21 @@ enum external_pb1200_ints { }; -/* For drivers/pcmcia/au1000_db1x00.c */ - -/* PCMCIA Db1x00 specific defines */ - -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* + * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#define BOARD_PC0_INT DB1200_PC0_INT -#define BOARD_PC1_INT DB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +#define BOARD_PC0_INT DB1200_PC0_INT +#define BOARD_PC1_INT DB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) -/* Nand chip select */ +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_DB1200_H */ - diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index e2c6bcac3b4..c8618df88cb 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy PB1200 Referrence Board + * AMD Alchemy Pb1200 Referrence Board * Board Registers defines. * * ######################################################################## @@ -27,21 +27,20 @@ #include #include -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the Pb1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC97 and I2S are muxed on the Pb1200 board. + * Refer to board documentation. */ #define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR @@ -102,10 +101,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_SD1WP 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -123,11 +122,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 /* not resets but in the same register */ -#define BCSR_RESETS_WSCFSM 0x0800 +#define BCSR_RESETS_WSCFSM 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_SD1MUX 0x8000 +#define BCSR_RESETS_SD1MUX 0x8000 #define BCSR_PCMCIA_PC0VPP 0x0003 #define BCSR_PCMCIA_PC0VCC 0x000C @@ -163,7 +162,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -174,14 +173,6 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_SD1INSERT 0x4000 #define BCSR_INT_SD1EJECT 0x8000 -/* PCMCIA Db1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - #define SMC91C111_PHYS_ADDR 0x0D000300 #define SMC91C111_INT PB1200_ETH_INT @@ -192,18 +183,19 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x1C000000 +#define NAND_PHYS_ADDR 0x1C000000 -/* Timing values as described in databook, * ns value stripped of +/* + * Timing values as described in databook, * ns value stripped of * lower 2 bits. - * These defines are here rather than an SOC1200 generic file because + * These defines are here rather than an Au1200 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -211,11 +203,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) - +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) /* * External Interrupts for Pb1200 as of 8/6/2004. @@ -248,13 +239,21 @@ enum external_pb1200_ints { PB1200_INT_END = PB1200_INT_BEGIN + 15 }; -/* For drivers/pcmcia/au1000_db1x00.c */ -#define BOARD_PC0_INT PB1200_PC0_INT -#define BOARD_PC1_INT PB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* + * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) -/* Nand chip select */ +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT PB1200_PC0_INT +#define BOARD_PC1_INT PB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_PB1200_H */ - -- cgit v1.2.3