From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-ppc/ppc4xx_dma.h | 583 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 583 insertions(+) create mode 100644 include/asm-ppc/ppc4xx_dma.h (limited to 'include/asm-ppc/ppc4xx_dma.h') diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h new file mode 100644 index 00000000000..8636cdbf6f8 --- /dev/null +++ b/include/asm-ppc/ppc4xx_dma.h @@ -0,0 +1,583 @@ +/* + * include/asm-ppc/ppc4xx_dma.h + * + * IBM PPC4xx DMA engine library + * + * Copyright 2000-2004 MontaVista Software Inc. + * + * Cleaned up a bit more, Matt Porter + * + * Original code by Armin Kuster + * and Pete Popov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef __KERNEL__ +#ifndef __ASMPPC_PPC4xx_DMA_H +#define __ASMPPC_PPC4xx_DMA_H + +#include +#include +#include +#include + +#undef DEBUG_4xxDMA + +#define MAX_PPC4xx_DMA_CHANNELS 4 + +/* in arch/ppc/kernel/setup.c -- Cort */ +extern unsigned long DMA_MODE_WRITE, DMA_MODE_READ; + +/* + * Function return status codes + * These values are used to indicate whether or not the function + * call was successful, or a bad/invalid parameter was passed. + */ +#define DMA_STATUS_GOOD 0 +#define DMA_STATUS_BAD_CHANNEL 1 +#define DMA_STATUS_BAD_HANDLE 2 +#define DMA_STATUS_BAD_MODE 3 +#define DMA_STATUS_NULL_POINTER 4 +#define DMA_STATUS_OUT_OF_MEMORY 5 +#define DMA_STATUS_SGL_LIST_EMPTY 6 +#define DMA_STATUS_GENERAL_ERROR 7 +#define DMA_STATUS_CHANNEL_NOTFREE 8 + +#define DMA_CHANNEL_BUSY 0x80000000 + +/* + * These indicate status as returned from the DMA Status Register. + */ +#define DMA_STATUS_NO_ERROR 0 +#define DMA_STATUS_CS 1 /* Count Status */ +#define DMA_STATUS_TS 2 /* Transfer Status */ +#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */ +#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */ + + +/* + * DMA Channel Control Registers + */ + +#ifdef CONFIG_44x +#define PPC4xx_DMA_64BIT +#define DMA_CR_OFFSET 1 +#else +#define DMA_CR_OFFSET 0 +#endif + +#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */ +#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31) +#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31) + +#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */ +#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30) +#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30) + +#define DMA_TD (1<<29) +#define SET_DMA_TD(x) (((x)&0x1)<<29) +#define GET_DMA_TD(x) (((x)&DMA_TD)>>29) + +#define DMA_PL (1<<28) /* Peripheral Location */ +#define SET_DMA_PL(x) (((x)&0x1)<<28) +#define GET_DMA_PL(x) (((x)&DMA_PL)>>28) + +#define EXTERNAL_PERIPHERAL 0 +#define INTERNAL_PERIPHERAL 1 + +#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */ +#define DMA_PW_MASK SET_DMA_PW(3) +#define PW_8 0 +#define PW_16 1 +#define PW_32 2 +#define PW_64 3 +/* FIXME: Add PW_128 support for 440GP DMA block */ +#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET)) + +#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */ +#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET)) + +#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */ +#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET)) + +#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */ +#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET)) + +#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */ +#define DMA_TM_MASK SET_DMA_TM(3) +#define TM_PERIPHERAL 0 /* Peripheral */ +#define TM_RESERVED 1 /* Reserved */ +#define TM_S_MM 2 /* Memory to Memory */ +#define TM_D_MM 3 /* Device Paced Memory to Memory */ +#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET)) + +#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */ +#define DMA_PSC_MASK SET_DMA_PSC(3) +#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET)) + +#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */ +#define DMA_PWC_MASK SET_DMA_PWC(0x3F) +#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET)) + +#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */ +#define DMA_PHC_MASK SET_DMA_PHC(0x7) +#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET)) + +#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */ +#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET)) + +#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET)) +#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET)) + +#define DMA_DEC (1<<(2)) /* Address Decrement */ +#define SET_DMA_DEC(x) (((x)&0x1)<<2) +#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2) + + +/* + * Transfer Modes + * These modes are defined in a way that makes it possible to + * simply "or" in the value in the control register. + */ + +#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */ + + /* Device-paced memory to memory, */ + /* device is at source address */ +#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM)) + + /* Device-paced memory to memory, */ + /* device is at destination address */ +#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM)) + +/* 405gp/440gp */ +#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */ +#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3) +#define PREFETCH_1 0 /* Prefetch 1 Double Word */ +#define PREFETCH_2 1 +#define PREFETCH_4 2 +#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET)) + +#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */ +#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET)) +#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET)) + +/* stb3x */ + +#define DMA_ECE_ENABLE (1<<5) +#define SET_DMA_ECE(x) (((x)&0x1)<<5) +#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5) + +#define DMA_TCD_DISABLE (1<<4) +#define SET_DMA_TCD(x) (((x)&0x1)<<4) +#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4) + +typedef uint32_t sgl_handle_t; + +#ifdef CONFIG_PPC4xx_EDMA + +#define SGL_LIST_SIZE 4096 +#define DMA_PPC4xx_SIZE SGL_LIST_SIZE + +#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */ +#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3) +#define PRIORITY_LOW 0 +#define PRIORITY_MID_LOW 1 +#define PRIORITY_MID_HIGH 2 +#define PRIORITY_HIGH 3 +#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET)) + +/* + * DMA Polarity Configuration Register + */ +#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3))) +#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3))) +#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */ + +/* + * DMA Sleep Mode Register + */ +#define SLEEP_MODE_ENABLE (1<<21) + +/* + * DMA Status Register + */ +#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ +#define DMA_CS1 (1<<30) +#define DMA_CS2 (1<<29) +#define DMA_CS3 (1<<28) + +#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ +#define DMA_TS1 (1<<26) +#define DMA_TS2 (1<<25) +#define DMA_TS3 (1<<24) + +#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ +#define DMA_CH1_ERR (1<<22) +#define DMA_CH2_ERR (1<<21) +#define DMA_CH3_ERR (1<<20) + +#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */ +#define DMA_IN_DMA_REQ1 (1<<18) +#define DMA_IN_DMA_REQ2 (1<<17) +#define DMA_IN_DMA_REQ3 (1<<16) + +#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */ +#define DMA_EXT_DMA_REQ1 (1<<14) +#define DMA_EXT_DMA_REQ2 (1<<13) +#define DMA_EXT_DMA_REQ3 (1<<12) + +#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */ +#define DMA_CH1_BUSY (1<<10) +#define DMA_CH2_BUSY (1<<9) +#define DMA_CH3_BUSY (1<<8) + +#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */ +#define DMA_SG1 (1<<6) +#define DMA_SG2 (1<<5) +#define DMA_SG3 (1<<4) + +/* DMA Channel Count Register */ +#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */ +#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */ +#define DMA_CTC_BSIZ_2 (0) +#define DMA_CTC_BSIZ_4 (1<<21) +#define DMA_CTC_BSIZ_8 (2<<21) +#define DMA_CTC_BSIZ_16 (3<<21) + +/* + * DMA SG Command Register + */ +#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */ +#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */ + +/* + * DMA Scatter/Gather Descriptor Bit fields + */ +#define SG_LINK (1<<31) /* Link */ +#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */ +#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */ +#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */ +#define SG_COUNT_MASK 0xFFFF /* Count Field */ + +#define SET_DMA_CONTROL \ + (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ + SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\ + SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ + SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ + SET_DMA_PL(p_init->pl) | /* peripheral location */ \ + SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ + SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ + SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ + SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ + SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ + SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ + SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ + SET_DMA_PREFETCH(p_init->pf) /* read prefetch */) + +#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan)) + +#elif defined(CONFIG_STBXXX_DMA) /* stb03xxx */ + +#define DMA_PPC4xx_SIZE 4096 + +/* + * DMA Status Register + */ + +#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */ +#define DMA_PRIORITY_MASK 0x00800001 +#define PRIORITY_LOW 0x00000000 +#define PRIORITY_MID_LOW 0x00000001 +#define PRIORITY_MID_HIGH 0x00800000 +#define PRIORITY_HIGH 0x00800001 +#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001)) + +#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ +#define DMA_CS1 (1<<30) +#define DMA_CS2 (1<<29) +#define DMA_CS3 (1<<28) + +#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ +#define DMA_TS1 (1<<26) +#define DMA_TS2 (1<<25) +#define DMA_TS3 (1<<24) + +#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ +#define DMA_CH1_ERR (1<<22) +#define DMA_CH2_ERR (1<<21) +#define DMA_CH3_ERR (1<<20) + +#define DMA_CT0 (1<<19) /* Chained transfere */ + +#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */ +#define DMA_IN_DMA_REQ1 (1<<17) +#define DMA_IN_DMA_REQ2 (1<<16) +#define DMA_IN_DMA_REQ3 (1<<15) + +#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */ +#define DMA_EXT_DMA_REQ1 (1<<13) +#define DMA_EXT_DMA_REQ2 (1<<12) +#define DMA_EXT_DMA_REQ3 (1<<11) + +#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */ +#define DMA_CH1_BUSY (1<<9) +#define DMA_CH2_BUSY (1<<8) +#define DMA_CH3_BUSY (1<<7) + +#define DMA_CT1 (1<<6) /* Chained transfere */ +#define DMA_CT2 (1<<5) +#define DMA_CT3 (1<<4) + +#define DMA_CH_ENABLE (1<<7) +#define SET_DMA_CH(x) (((x)&0x1)<<7) +#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7) + +/* STBx25xxx dma unique */ +/* enable device port on a dma channel + * example ext 0 on dma 1 + */ + +#define SSP0_RECV 15 +#define SSP0_XMIT 14 +#define EXT_DMA_0 12 +#define SC1_XMIT 11 +#define SC1_RECV 10 +#define EXT_DMA_2 9 +#define EXT_DMA_3 8 +#define SERIAL2_XMIT 7 +#define SERIAL2_RECV 6 +#define SC0_XMIT 5 +#define SC0_RECV 4 +#define SERIAL1_XMIT 3 +#define SERIAL1_RECV 2 +#define SERIAL0_XMIT 1 +#define SERIAL0_RECV 0 + +#define DMA_CHAN_0 1 +#define DMA_CHAN_1 2 +#define DMA_CHAN_2 3 +#define DMA_CHAN_3 4 + +/* end STBx25xx */ + +/* + * Bit 30 must be one for Redwoods, otherwise transfers may receive errors. + */ +#define DMA_CR_MB0 0x2 + +#define SET_DMA_CONTROL \ + (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ + SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ + SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ + SET_DMA_PL(p_init->pl) | /* peripheral location */ \ + SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ + SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ + SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ + SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ + SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ + SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ + SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ + SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \ + SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \ + SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \ + DMA_CR_MB0 /* must be one */) + +#define GET_DMA_POLARITY(chan) chan + +#endif + +typedef struct { + unsigned short in_use; /* set when channel is being used, clr when + * available. + */ + /* + * Valid polarity settings: + * DMAReq_ActiveLow(n) + * DMAAck_ActiveLow(n) + * EOT_ActiveLow(n) + * + * n is 0 to max dma chans + */ + unsigned int polarity; + + char buffer_enable; /* Boolean: buffer enable */ + char tce_enable; /* Boolean: terminal count enable */ + char etd_output; /* Boolean: eot pin is a tc output */ + char pce; /* Boolean: parity check enable */ + + /* + * Peripheral location: + * INTERNAL_PERIPHERAL (UART0 on the 405GP) + * EXTERNAL_PERIPHERAL + */ + char pl; /* internal/external peripheral */ + + /* + * Valid pwidth settings: + * PW_8 + * PW_16 + * PW_32 + * PW_64 + */ + unsigned int pwidth; + + char dai; /* Boolean: dst address increment */ + char sai; /* Boolean: src address increment */ + + /* + * Valid psc settings: 0-3 + */ + unsigned int psc; /* Peripheral Setup Cycles */ + + /* + * Valid pwc settings: + * 0-63 + */ + unsigned int pwc; /* Peripheral Wait Cycles */ + + /* + * Valid phc settings: + * 0-7 + */ + unsigned int phc; /* Peripheral Hold Cycles */ + + /* + * Valid cp (channel priority) settings: + * PRIORITY_LOW + * PRIORITY_MID_LOW + * PRIORITY_MID_HIGH + * PRIORITY_HIGH + */ + unsigned int cp; /* channel priority */ + + /* + * Valid pf (memory read prefetch) settings: + * + * PREFETCH_1 + * PREFETCH_2 + * PREFETCH_4 + */ + unsigned int pf; /* memory read prefetch */ + + /* + * Boolean: channel interrupt enable + * NOTE: for sgl transfers, only the last descriptor will be setup to + * interrupt. + */ + char int_enable; + + char shift; /* easy access to byte_count shift, based on */ + /* the width of the channel */ + + uint32_t control; /* channel control word */ + + /* These variabled are used ONLY in single dma transfers */ + unsigned int mode; /* transfer mode */ + phys_addr_t addr; + char ce; /* channel enable */ +#ifdef CONFIG_STB03xxx + char ch_enable; + char tcd_disable; + char ece_enable; + char td; /* transfer direction */ +#endif + + char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */ +} ppc_dma_ch_t; + +/* + * PPC44x DMA implementations have a slightly different + * descriptor layout. Probably moved about due to the + * change to 64-bit addresses and link pointer. I don't + * know why they didn't just leave control_count after + * the dst_addr. + */ +#ifdef PPC4xx_DMA_64BIT +typedef struct { + uint32_t control; + uint32_t control_count; + phys_addr_t src_addr; + phys_addr_t dst_addr; + phys_addr_t next; +} ppc_sgl_t; +#else +typedef struct { + uint32_t control; + phys_addr_t src_addr; + phys_addr_t dst_addr; + uint32_t control_count; + uint32_t next; +} ppc_sgl_t; +#endif + +typedef struct { + unsigned int dmanr; + uint32_t control; /* channel ctrl word; loaded from each descrptr */ + uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */ + dma_addr_t dma_addr; /* dma (physical) address of this list */ + ppc_sgl_t *phead; + dma_addr_t phead_dma; + ppc_sgl_t *ptail; + dma_addr_t ptail_dma; +} sgl_list_info_t; + +typedef struct { + phys_addr_t *src_addr; + phys_addr_t *dst_addr; + phys_addr_t dma_src_addr; + phys_addr_t dma_dst_addr; +} pci_alloc_desc_t; + +extern ppc_dma_ch_t dma_channels[]; + +/* + * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c + */ +extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *); +extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *); +extern int ppc4xx_set_channel_priority(unsigned int, unsigned int); +extern unsigned int ppc4xx_get_peripheral_width(unsigned int); +extern void ppc4xx_set_sg_addr(int, phys_addr_t); +extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int); +extern void ppc4xx_enable_dma_sgl(sgl_handle_t); +extern void ppc4xx_disable_dma_sgl(sgl_handle_t); +extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *); +extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *); +extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int); +extern void ppc4xx_free_dma_handle(sgl_handle_t); +extern int ppc4xx_get_dma_status(void); +extern int ppc4xx_enable_burst(unsigned int); +extern int ppc4xx_disable_burst(unsigned int); +extern int ppc4xx_set_burst_size(unsigned int, unsigned int); +extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr); +extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr); +extern void ppc4xx_enable_dma(unsigned int dmanr); +extern void ppc4xx_disable_dma(unsigned int dmanr); +extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count); +extern int ppc4xx_get_dma_residue(unsigned int dmanr); +extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr, + phys_addr_t dst_dma_addr); +extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr); +extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr); +extern int ppc4xx_clr_dma_status(unsigned int dmanr); +extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); +extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); +extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode); + +/* These are in kernel/dma.c: */ + +/* reserve a DMA channel */ +extern int request_dma(unsigned int dmanr, const char *device_id); +/* release it again */ +extern void free_dma(unsigned int dmanr); +#endif +#endif /* __KERNEL__ */ -- cgit v1.2.3