From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-sh/snapgear/io.h | 92 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 include/asm-sh/snapgear/io.h (limited to 'include/asm-sh/snapgear') diff --git a/include/asm-sh/snapgear/io.h b/include/asm-sh/snapgear/io.h new file mode 100644 index 00000000000..bfa97ac0628 --- /dev/null +++ b/include/asm-sh/snapgear/io.h @@ -0,0 +1,92 @@ +/* + * include/asm-sh/snapgear/io.h + * + * Modified version of io_se.h for the snapgear-specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for a SnapGear + */ + +#ifndef _ASM_SH_IO_SNAPGEAR_H +#define _ASM_SH_IO_SNAPGEAR_H + +#if defined(CONFIG_CPU_SH4) +/* + * The external interrupt lines, these take up ints 0 - 15 inclusive + * depending on the priority for the interrupt. In fact the priority + * is the interrupt :-) + */ + +#define IRL0_IRQ 2 +#define IRL0_IPR_ADDR INTC_IPRD +#define IRL0_IPR_POS 3 +#define IRL0_PRIORITY 13 + +#define IRL1_IRQ 5 +#define IRL1_IPR_ADDR INTC_IPRD +#define IRL1_IPR_POS 2 +#define IRL1_PRIORITY 10 + +#define IRL2_IRQ 8 +#define IRL2_IPR_ADDR INTC_IPRD +#define IRL2_IPR_POS 1 +#define IRL2_PRIORITY 7 + +#define IRL3_IRQ 11 +#define IRL3_IPR_ADDR INTC_IPRD +#define IRL3_IPR_POS 0 +#define IRL3_PRIORITY 4 +#endif + +extern unsigned char snapgear_inb(unsigned long port); +extern unsigned short snapgear_inw(unsigned long port); +extern unsigned int snapgear_inl(unsigned long port); + +extern void snapgear_outb(unsigned char value, unsigned long port); +extern void snapgear_outw(unsigned short value, unsigned long port); +extern void snapgear_outl(unsigned int value, unsigned long port); + +extern unsigned char snapgear_inb_p(unsigned long port); +extern void snapgear_outb_p(unsigned char value, unsigned long port); + +extern void snapgear_insl(unsigned long port, void *addr, unsigned long count); +extern void snapgear_outsl(unsigned long port, const void *addr, unsigned long count); + +extern unsigned long snapgear_isa_port2addr(unsigned long offset); + +#ifdef CONFIG_SH_SECUREEDGE5410 +/* + * We need to remember what was written to the ioport as some bits + * are shared with other functions and you cannot read back what was + * written :-| + * + * Bit Read Write + * ----------------------------------------------- + * D0 DCD on ttySC1 power + * D1 Reset Switch heatbeat + * D2 ttySC0 CTS (7100) LAN + * D3 - WAN + * D4 ttySC0 DCD (7100) CONSOLE + * D5 - ONLINE + * D6 - VPN + * D7 - DTR on ttySC1 + * D8 - ttySC0 RTS (7100) + * D9 - ttySC0 DTR (7100) + * D10 - RTC SCLK + * D11 RTC DATA RTC DATA + * D12 - RTS RESET + */ + + #define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) + extern unsigned short secureedge5410_ioport; + + #define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ + (secureedge5410_ioport = \ + ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) + #define SECUREEDGE_READ_IOPORT() \ + ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) +#endif + +#endif /* _ASM_SH_IO_SNAPGEAR_H */ -- cgit v1.2.3