From b4b86416712d79a77cdc53756751b3b91fbb7a3d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 10 Jul 2008 15:25:21 +0200 Subject: x86, VisWS: turn into generic arch, create include/asm-x86/visws/ move the include/asm-x86/mach-visws/ VISWS specific hardware details include files into include/asm-x86/visws, to be used from generic code. No code changed. Signed-off-by: Ingo Molnar --- include/asm-x86/mach-visws/piix4.h | 107 ------------------------------------- 1 file changed, 107 deletions(-) delete mode 100644 include/asm-x86/mach-visws/piix4.h (limited to 'include/asm-x86/mach-visws/piix4.h') diff --git a/include/asm-x86/mach-visws/piix4.h b/include/asm-x86/mach-visws/piix4.h deleted file mode 100644 index 83ea4f46e41..00000000000 --- a/include/asm-x86/mach-visws/piix4.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef __I386_SGI_PIIX_H -#define __I386_SGI_PIIX_H - -/* - * PIIX4 as used on SGI Visual Workstations - */ - -#define PIIX_PM_START 0x0F80 - -#define SIO_GPIO_START 0x0FC0 - -#define SIO_PM_START 0x0FC8 - -#define PMBASE PIIX_PM_START -#define GPIREG0 (PMBASE+0x30) -#define GPIREG(x) (GPIREG0+((x)/8)) -#define GPIBIT(x) (1 << ((x)%8)) - -#define PIIX_GPI_BD_ID1 18 -#define PIIX_GPI_BD_ID2 19 -#define PIIX_GPI_BD_ID3 20 -#define PIIX_GPI_BD_ID4 21 -#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) -#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \ - GPIBIT(PIIX_GPI_BD_ID2) | \ - GPIBIT(PIIX_GPI_BD_ID3) | \ - GPIBIT(PIIX_GPI_BD_ID4) ) - -#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) - -#define SIO_INDEX 0x2e -#define SIO_DATA 0x2f - -#define SIO_DEV_SEL 0x7 -#define SIO_DEV_ENB 0x30 -#define SIO_DEV_MSB 0x60 -#define SIO_DEV_LSB 0x61 - -#define SIO_GP_DEV 0x7 - -#define SIO_GP_BASE SIO_GPIO_START -#define SIO_GP_MSB (SIO_GP_BASE>>8) -#define SIO_GP_LSB (SIO_GP_BASE&0xff) - -#define SIO_GP_DATA1 (SIO_GP_BASE+0) - -#define SIO_PM_DEV 0x8 - -#define SIO_PM_BASE SIO_PM_START -#define SIO_PM_MSB (SIO_PM_BASE>>8) -#define SIO_PM_LSB (SIO_PM_BASE&0xff) -#define SIO_PM_INDEX (SIO_PM_BASE+0) -#define SIO_PM_DATA (SIO_PM_BASE+1) - -#define SIO_PM_FER2 0x1 - -#define SIO_PM_GP_EN 0x80 - - - -/* - * This is the dev/reg where generating a config cycle will - * result in a PCI special cycle. - */ -#define SPECIAL_DEV 0xff -#define SPECIAL_REG 0x00 - -/* - * PIIX4 needs to see a special cycle with the following data - * to be convinced the processor has gone into the stop grant - * state. PIIX4 insists on seeing this before it will power - * down a system. - */ -#define PIIX_SPECIAL_STOP 0x00120002 - -#define PIIX4_RESET_PORT 0xcf9 -#define PIIX4_RESET_VAL 0x6 - -#define PMSTS_PORT 0xf80 // 2 bytes PM Status -#define PMEN_PORT 0xf82 // 2 bytes PM Enable -#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control - -#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state - -/* - * PMSTS and PMEN I/O bit definitions. - * (Bits are the same in both registers) - */ -#define PM_STS_RSM (1<<15) // Resume Status -#define PM_STS_PWRBTNOR (1<<11) // Power Button Override -#define PM_STS_RTC (1<<10) // RTC status -#define PM_STS_PWRBTN (1<<8) // Power Button Pressed? -#define PM_STS_GBL (1<<5) // Global Status -#define PM_STS_BM (1<<4) // Bus Master Status -#define PM_STS_TMROF (1<<0) // Timer Overflow Status. - -/* - * Stop clock GPI register - */ -#define PIIX_GPIREG0 (0xf80 + 0x30) - -/* - * Stop clock GPI bit in GPIREG0 - */ -#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in - -#endif -- cgit v1.2.3