From 853116a10544206b6b2cf42ebc9d78fba2668888 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 14 Jan 2009 23:03:17 -0800 Subject: regulator: add get_status() Based on previous LKML discussions: * Update docs for regulator sysfs class attributes to highlight the fact that all current attributes are intended to be control inputs, including notably "state" and "opmode" which previously implied otherwise. * Define a new regulator driver get_status() method, which is the first method reporting regulator outputs instead of inputs. It can report on/off and error status; or instead of simply "on", report the actual operating mode. For the moment, this is a sysfs-only interface, not accessible to regulator clients. Such clients can use the current notification interfaces to detect errors, if the regulator reports them. Signed-off-by: David Brownell Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 2dae05705f1..6e957aae762 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -21,6 +21,17 @@ struct regulator_dev; struct regulator_init_data; +enum regulator_status { + REGULATOR_STATUS_OFF, + REGULATOR_STATUS_ON, + REGULATOR_STATUS_ERROR, + /* fast/normal/idle/standby are flavors of "on" */ + REGULATOR_STATUS_FAST, + REGULATOR_STATUS_NORMAL, + REGULATOR_STATUS_IDLE, + REGULATOR_STATUS_STANDBY, +}; + /** * struct regulator_ops - regulator operations. * @@ -72,6 +83,12 @@ struct regulator_ops { int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); + /* report regulator status ... most other accessors report + * control inputs, this reports results of combining inputs + * from Linux (and other sources) with the actual load. + */ + int (*get_status)(struct regulator_dev *); + /* get most efficient regulator operating mode for load */ unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, int output_uV, int load_uA); -- cgit v1.2.3 From b136fb4463d13eea129bf090a8a465bba6bf0003 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 19 Jan 2009 18:20:58 +0000 Subject: Regulator: Push lock out of _notifier_call_chain + add voltage change event. Regulator: Push lock out of _notifier_call_chain and into caller functions (side effect of fixing deadlock in regulator_force_disable) + Add a voltage changed event. Signed-off-by: Jonathan Cameron Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 801bf77ff4e..533f4e26db9 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -88,6 +88,7 @@ * FAIL Regulator output has failed. * OVER_TEMP Regulator over temp. * FORCE_DISABLE Regulator shut down by software. + * VOLTAGE_CHANGE Regulator voltage changed. * * NOTE: These events can be OR'ed together when passed into handler. */ @@ -98,6 +99,7 @@ #define REGULATOR_EVENT_FAIL 0x08 #define REGULATOR_EVENT_OVER_TEMP 0x10 #define REGULATOR_EVENT_FORCE_DISABLE 0x20 +#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40 struct regulator; -- cgit v1.2.3 From 0527100fd11d9710c7e153d791da78824b7b46fa Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 Jan 2009 13:37:02 +0000 Subject: regulator: Pass regulator init data as explict argument when registering Rather than having the regulator init data read from the platform_data member of the struct device that is registered for the regulator make the init data an explict argument passed in when registering. This allows drivers to use the platform data for their own purposes if they wish. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 6e957aae762..2254ad93b78 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -138,7 +138,8 @@ struct regulator_desc { }; struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - struct device *dev, void *driver_data); + struct device *dev, struct regulator_init_data *init_data, + void *driver_data); void regulator_unregister(struct regulator_dev *rdev); int regulator_notifier_call_chain(struct regulator_dev *rdev, -- cgit v1.2.3 From 93c62da23a717f59933ec799688da42f71d8c6c4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 Jan 2009 13:37:03 +0000 Subject: regulator: Allow init data to be supplied for bq24022 Previously it was not possible to do so, making it impossible for machines to configure the driver. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/bq24022.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h index e84b0a9feda..a6d014005d4 100644 --- a/include/linux/regulator/bq24022.h +++ b/include/linux/regulator/bq24022.h @@ -10,6 +10,8 @@ * */ +struct regulator_init_data; + /** * bq24022_mach_info - platform data for bq24022 * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging @@ -18,4 +20,5 @@ struct bq24022_mach_info { int gpio_nce; int gpio_iset2; + struct regulator_init_data *init_data; }; -- cgit v1.2.3 From bcf3402c50a48d51462f37f72129d9c4369702b4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 Jan 2009 13:37:04 +0000 Subject: regulator: Allow init_data to be passed to fixed voltage regulators Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/fixed.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 1387a5d2190..91b4da31f1b 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -14,9 +14,12 @@ #ifndef __REGULATOR_FIXED_H #define __REGULATOR_FIXED_H +struct regulator_init_data; + struct fixed_voltage_config { const char *supply_name; int microvolts; + struct regulator_init_data *init_data; }; #endif -- cgit v1.2.3 From 1fa9ad52b07811ebf258f3f6907de8dbf020ec2d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 21 Jan 2009 14:08:40 +0000 Subject: regulator: Hoist struct regulator_dev out of core to fix notifiers Commit 872ed3fe176833f7d43748eb88010da4bbd2f983 caused regulator drivers to take the struct regulator_dev lock themselves which requires that the struct be visible to them. Band aid this by making the struct visible. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 2254ad93b78..c263e36e564 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -137,6 +137,38 @@ struct regulator_desc { struct module *owner; }; +/* + * struct regulator_dev + * + * Voltage / Current regulator class device. One for each + * regulator. + * + * This should *not* be used directly by anything except the regulator + * core and notification injection (which should take the mutex and do + * no other direct access). + */ +struct regulator_dev { + struct regulator_desc *desc; + int use_count; + + /* lists we belong to */ + struct list_head list; /* list of all regulators */ + struct list_head slist; /* list of supplied regulators */ + + /* lists we own */ + struct list_head consumer_list; /* consumers we supply */ + struct list_head supply_list; /* regulators we supply */ + + struct blocking_notifier_head notifier; + struct mutex mutex; /* consumer lock */ + struct module *owner; + struct device dev; + struct regulation_constraints *constraints; + struct regulator_dev *supply; /* for tree */ + + void *reg_data; /* regulator_dev data */ +}; + struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, struct device *dev, struct regulator_init_data *init_data, void *driver_data); -- cgit v1.2.3 From 90ca563b1030bece8a4f15a910e39a46f059ff48 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 20 Jan 2009 16:29:05 -0800 Subject: regulator: fix header file missing kernel-doc Fix regulator/driver.h missing kernel-doc: Warning(linux-next-20090120//include/linux/regulator/driver.h:108): No description found for parameter 'get_status' Signed-off-by: Randy Dunlap cc: Liam Girdwood cc: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index c263e36e564..eb8773b05ac 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -51,6 +51,7 @@ enum regulator_status { * * @set_mode: Set the operating mode for the regulator. * @get_mode: Get the current operating mode for the regulator. + * @get_status: Report the regulator status. * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. * -- cgit v1.2.3 From 1dd68f01886a2d5cabbbe90b86e82f70917de89c Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Mon, 2 Feb 2009 21:43:31 +0000 Subject: regulator: email - update email address and regulator webpage. Remove deceased email address and update to new address. Also update website details in MAINTAINERS with correct page. Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 2 +- include/linux/regulator/driver.h | 2 +- include/linux/regulator/machine.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 533f4e26db9..df6c4bcf38f 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -3,7 +3,7 @@ * * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. * - * Author: Liam Girdwood + * Author: Liam Girdwood * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index eb8773b05ac..0cf37bc85c4 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -3,7 +3,7 @@ * * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. * - * Author: Liam Girdwood + * Author: Liam Girdwood * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 3794773b23d..5aa00ee36a3 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -3,7 +3,7 @@ * * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. * - * Author: Liam Girdwood + * Author: Liam Girdwood * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- cgit v1.2.3 From a308466c24b4f42bab6945026e938874d22cde50 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 26 Feb 2009 19:24:19 +0000 Subject: regulator: Allow regulators to set the initial operating mode This is useful when wishing to run in a fixed operating mode that isn't the default. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5aa00ee36a3..1eb861cf4b2 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -83,6 +83,7 @@ struct regulator_state { * @state_standby: State for regulator when system is suspended in standby * mode. * @initial_state: Suspend state to set by default. + * @initial_mode: Mode to set at startup. */ struct regulation_constraints { @@ -111,6 +112,9 @@ struct regulation_constraints { struct regulator_state state_standby; suspend_state_t initial_state; /* suspend state to set at init */ + /* mode to set on startup */ + unsigned int initial_mode; + /* constriant flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ -- cgit v1.2.3 From 4367cfdc7c657ad8a797f51b9ffd3c64b31910e7 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 26 Feb 2009 11:48:36 -0800 Subject: regulator: enumerate voltages (v2) Add a basic mechanism for regulators to report the discrete voltages they support: list_voltage() enumerates them using selectors numbered from 0 to an upper bound. Use those methods to force machine-level constraints into bounds. (Example: regulator supports 1.8V, 2.4V, 2.6V, 3.3V, and board constraints for that rail are 2.0V to 3.6V ... so the range of voltages is then 2.4V to 3.3V on this board.) Export those voltages to the regulator consumer interface, so for example regulator hooked up to an MMC/SD/SDIO slot can report the actual voltage options available to cards connected there. Signed-off-by: David Brownell Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 2 ++ include/linux/regulator/driver.h | 9 +++++++++ 2 files changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index df6c4bcf38f..277f4b964df 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -142,6 +142,8 @@ int regulator_bulk_disable(int num_consumers, void regulator_bulk_free(int num_consumers, struct regulator_bulk_data *consumers); +int regulator_count_voltages(struct regulator *regulator); +int regulator_list_voltage(struct regulator *regulator, unsigned selector); int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); int regulator_get_voltage(struct regulator *regulator); int regulator_set_current_limit(struct regulator *regulator, diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 0cf37bc85c4..2255468d456 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -45,6 +45,10 @@ enum regulator_status { * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. * @get_voltage: Return the currently configured voltage for the regulator. + * @list_voltage: Return one of the supported voltages, in microvolts; zero + * if the selector indicates a voltage that is unusable on this system; + * or negative errno. Selectors range from zero to one less than + * regulator_desc.n_voltages. Voltages may be reported in any order. * * @set_current_limit: Configure a limit for a current-limited regulator. * @get_current_limit: Get the limit for a current-limited regulator. @@ -66,6 +70,9 @@ enum regulator_status { */ struct regulator_ops { + /* enumerate supported voltages */ + int (*list_voltage) (struct regulator_dev *, unsigned selector); + /* get/set regulator voltage */ int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV); int (*get_voltage) (struct regulator_dev *); @@ -124,6 +131,7 @@ enum regulator_type { * * @name: Identifying name for the regulator. * @id: Numerical identifier for the regulator. + * @n_voltages: Number of selectors available for ops.list_voltage(). * @ops: Regulator operations table. * @irq: Interrupt number for the regulator. * @type: Indicates if the regulator is a voltage or current regulator. @@ -132,6 +140,7 @@ enum regulator_type { struct regulator_desc { const char *name; int id; + unsigned n_voltages; struct regulator_ops *ops; int irq; enum regulator_type type; -- cgit v1.2.3 From 3b2a6061afe6fcc44437cd5ec641b0aeb2825ee3 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 26 Feb 2009 13:28:41 -0800 Subject: regulator: get_status() grows kerneldoc Add kerneldoc for the new get_status() message. Fix the existing kerneldoc for that struct in two ways: (a) Syntax, making sure parameter descriptions immediately follow the one-line struct description and that the first blank lines is before any more expansive description; (b) Presentation for a few points, to highlight the fact that the previous "get" methods exist only to report the current configuration, not to display actual status. Signed-off-by: David Brownell Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 2255468d456..4848d8dacd9 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -35,11 +35,8 @@ enum regulator_status { /** * struct regulator_ops - regulator operations. * - * This struct describes regulator operations which can be implemented by - * regulator chip drivers. - * - * @enable: Enable the regulator. - * @disable: Disable the regulator. + * @enable: Configure the regulator as enabled. + * @disable: Configure the regulator as disabled. * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. * * @set_voltage: Set the voltage for the regulator within the range specified. @@ -51,11 +48,11 @@ enum regulator_status { * regulator_desc.n_voltages. Voltages may be reported in any order. * * @set_current_limit: Configure a limit for a current-limited regulator. - * @get_current_limit: Get the limit for a current-limited regulator. + * @get_current_limit: Get the configured limit for a current-limited regulator. * - * @set_mode: Set the operating mode for the regulator. - * @get_mode: Get the current operating mode for the regulator. - * @get_status: Report the regulator status. + * @get_mode: Get the configured operating mode for the regulator. + * @get_status: Return actual (not as-configured) status of regulator, as a + * REGULATOR_STATUS value (or negative errno) * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. * @@ -67,6 +64,9 @@ enum regulator_status { * suspended. * @set_suspend_mode: Set the operating mode for the regulator when the * system is suspended. + * + * This struct describes regulator operations which can be implemented by + * regulator chip drivers. */ struct regulator_ops { @@ -94,6 +94,7 @@ struct regulator_ops { /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs * from Linux (and other sources) with the actual load. + * returns REGULATOR_STATUS_* or negative errno. */ int (*get_status)(struct regulator_dev *); -- cgit v1.2.3 From fa16a5c13a2fc1433cfff38a083b4f8c5138d022 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 8 Feb 2009 10:37:06 -0800 Subject: regulator: twl4030 regulators Support most of the LDO regulators in the twl4030 family chips. In the case of LDOs supporting MMC/SD, the voltage controls are used; but in most other cases, the regulator framework is only used to enable/disable a supplies, conserving power when a given voltage rail is not needed. The drivers/mfd/twl4030-core.c code already sets up the various regulators according to board-specific configuration, and knows that some chips don't provide the full set of voltage rails. The omitted regulators are intended to be under hardware control, such as during the hardware-mediated system powerup, powerdown, and suspend states. Unless/until software hooks are known to be safe, they won't be exported here. These regulators implement the new get_status() operation, but can't realistically implement get_mode(); the status output is effectively the result of a vote, with the relevant hardware inputs not exposed. Signed-off-by: David Brownell Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/i2c/twl4030.h | 47 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 8137f660a5c..0dc80ef2497 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -218,6 +218,53 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /*----------------------------------------------------------------------*/ +/* Power bus message definitions */ + +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 +#define DEV_GRP_P2 0x2 +#define DEV_GRP_P3 0x4 + +#define RES_GRP_RES 0x0 +#define RES_GRP_PP 0x1 +#define RES_GRP_RC 0x2 +#define RES_GRP_PP_RC 0x3 +#define RES_GRP_PR 0x4 +#define RES_GRP_PP_PR 0x5 +#define RES_GRP_RC_PR 0x6 +#define RES_GRP_ALL 0x7 + +#define RES_TYPE2_R0 0x0 + +#define RES_TYPE_ALL 0x7 + +#define RES_STATE_WRST 0xF +#define RES_STATE_ACTIVE 0xE +#define RES_STATE_SLEEP 0x8 +#define RES_STATE_OFF 0x0 + +/* + * Power Bus Message Format ... these can be sent individually by Linux, + * but are usually part of downloaded scripts that are run when various + * power events are triggered. + * + * Broadcast Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] + * RES_STATE[3:0] + * + * Singular Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] + */ + +#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ + ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ + | (type) << 4 | (state)) + +#define MSG_SINGULAR(devgrp, id, state) \ + ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) + +/*----------------------------------------------------------------------*/ + struct twl4030_bci_platform_data { int *battery_tmp_tbl; unsigned int tblsize; -- cgit v1.2.3 From 5c13941acc513669c7d07b28789c3f9ba66ddddf Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 11 Mar 2009 03:30:43 -0800 Subject: MMC: regulator utilities Glue between MMC and regulator stacks ... verified with some OMAP3 boards using adjustable and configured-as-fixed regulators on several MMC controllers. These calls are intended to be used by MMC host adapters using at least one regulator per host. Examples include slots with regulators supporting multiple voltages and ones using multiple voltage rails (e.g. DAT4..DAT7 using a separate supply, or a split rail chip like certain SDIO WLAN or eMMC solutions). Signed-off-by: David Brownell Acked-by: Pierre Ossman Signed-off-by: Liam Girdwood --- include/linux/mmc/host.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 4e457256bd3..3e7615e9087 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -192,5 +192,10 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host) wake_up_process(host->sdio_irq_thread); } +struct regulator; + +int mmc_regulator_get_ocrmask(struct regulator *supply); +int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit); + #endif -- cgit v1.2.3 From cacf90f24e80cec9334f98e0377149f943fe9f16 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 2 Mar 2009 16:32:46 +0000 Subject: regulator: Allow boot_on regulators to be disabled by clients Rather than incrementing the reference count for boot_on regulators (which prevents them being disabled later on) simply force the regulator to be enabled when applying the constraints. Previously boot_on was essentially equivalent to always_on. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 1eb861cf4b2..5de7aa3b02a 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -73,7 +73,9 @@ struct regulator_state { * * @always_on: Set if the regulator should never be disabled. * @boot_on: Set if the regulator is enabled when the system is initially - * started. + * started. If the regulator is not enabled by the hardware or + * bootloader then it will be enabled when the constraints are + * applied. * @apply_uV: Apply the voltage constraint when initialising. * * @input_uV: Input voltage for regulator when supplied by another regulator. -- cgit v1.2.3 From ca7255614e0861e36480103f4a402a115803d7b5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Mar 2009 19:36:34 +0000 Subject: regulator: Support disabling of unused regulators by machines At present it is not possible for machine constraints to disable regulators which have been left on when the system starts, for example as a result of fixed default configurations in hardware. This means that power may be wasted by these regulators if they are not in use. Provide intial support for this with a late_initcall which will disable any unused regulators if the machine has enabled this feature by calling regulator_has_full_constraints(). If this has not been called then print a warning to encourage users to fully specify their constraints so that we can change this to be the default behaviour in future. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5de7aa3b02a..bac64fa390f 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -166,4 +166,6 @@ struct regulator_init_data { int regulator_suspend_prepare(suspend_state_t state); +void regulator_has_full_constraints(void); + #endif -- cgit v1.2.3