From 6859a8402945cf1d74af75a2e1aa4e327a506ab4 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Wed, 26 Mar 2008 16:11:31 -0500 Subject: x86: resize NR_IRQS for large machines On machines with very large numbers of cpus, tables that are dimensioned by NR_IRQS get very large, especially the irq_desc table. They are also very sparsely used. When the cpu count is > MAX_IO_APICS, use MAX_IO_APICS to set NR_IRQS, otherwise use NR_CPUS. Signed-off-by: Alan Mayer Reviewed-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/kernel_stat.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index e8ffce898bf..cf9f40a91c9 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -1,11 +1,11 @@ #ifndef _LINUX_KERNEL_STAT_H #define _LINUX_KERNEL_STAT_H -#include #include #include #include #include +#include #include /* -- cgit v1.2.3 From 988f7b5789ccf5cfed14c72e28573a49f0cb4809 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Tue, 18 Mar 2008 17:00:22 -0700 Subject: x86: PAT export resource_wc in pci sysfs For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159bcd4e..d18b1dd49fa 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -206,6 +206,7 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ + struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */ #ifdef CONFIG_PCI_MSI struct list_head msi_list; #endif -- cgit v1.2.3 From 63687a528c39a67c1a213cdffa09feb0e6af9dbe Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: x86: move tracedata to RODATA .. allowing it to be write-protected just as other read-only data under CONFIG_DEBUG_RODATA. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/resume-trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h index f3f4f28c696..c9ba2fdf807 100644 --- a/include/linux/resume-trace.h +++ b/include/linux/resume-trace.h @@ -8,7 +8,7 @@ extern int pm_trace_enabled; struct device; extern void set_trace_device(struct device *); -extern void generate_resume_trace(void *tracedata, unsigned int user); +extern void generate_resume_trace(const void *tracedata, unsigned int user); #define TRACE_DEVICE(dev) do { \ if (pm_trace_enabled) \ -- cgit v1.2.3 From e9197bf0114661195bee35e7795cfc42164d9b2c Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:10 -0700 Subject: x86 boot: remove some unused extern function declarations Remove three extern declarations for routines that don't exist. Fix a typo in a comment. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- include/linux/efi.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/efi.h b/include/linux/efi.h index a5f359a7ad0..807373d467f 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -287,7 +287,6 @@ efi_guid_unparse(efi_guid_t *guid, char *out) extern void efi_init (void); extern void *efi_get_pal_addr (void); extern void efi_map_pal_code (void); -extern void efi_map_memmap(void); extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg); extern void efi_gettimeofday (struct timespec *ts); extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */ @@ -295,14 +294,11 @@ extern u64 efi_get_iobase (void); extern u32 efi_mem_type (unsigned long phys_addr); extern u64 efi_mem_attributes (unsigned long phys_addr); extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); -extern int efi_mem_attribute_range (unsigned long phys_addr, unsigned long size, - u64 attr); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); extern unsigned long efi_get_time(void); extern int efi_set_rtc_mmss(unsigned long nowtime); -extern int is_available_memory(efi_memory_desc_t * md); extern struct efi_memory_map memmap; /** -- cgit v1.2.3 From c801ed3860fe2f84281d4cae4c3e6ca87e81e890 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:23 -0700 Subject: x86 boot: simplify pageblock_bits enum declaration The use of #defines with '##' pre-processor concatenation is a useful way to form several symbol names with a common pattern. But when there is just a single name obtained from that #define, it's just obfuscation. Better to just write the plain symbol name, as is. The following patch is a result of my wasting ten minutes looking through the kernel to figure out what 'PB_migrate_end' meant, and forgetting what I came to do, by the time I figured out that the #define PB_range macro defined it. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- include/linux/pageblock-flags.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pageblock-flags.h b/include/linux/pageblock-flags.h index e875905f7b1..e8c06122be3 100644 --- a/include/linux/pageblock-flags.h +++ b/include/linux/pageblock-flags.h @@ -25,13 +25,11 @@ #include -/* Macro to aid the definition of ranges of bits */ -#define PB_range(name, required_bits) \ - name, name ## _end = (name + required_bits) - 1 - /* Bit indices that affect a whole block of pages */ enum pageblock_bits { - PB_range(PB_migrate, 3), /* 3 bits required for migrate types */ + PB_migrate, + PB_migrate_end = PB_migrate + 3 - 1, + /* 3 bits required for migrate types */ NR_PAGEBLOCK_BITS }; -- cgit v1.2.3 From 9e124fe16ff24746d6de5a2ad685266d7bce0e08 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:07 +0100 Subject: xen: Enable console tty by default in domU if it's not a dummy Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/linux/console.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/console.h b/include/linux/console.h index a4f27fbdf54..248e6e3b9b7 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -108,6 +108,8 @@ struct console { struct console *next; }; +extern int console_set_on_cmdline; + extern int add_preferred_console(char *name, int idx, char *options); extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options); extern void register_console(struct console *); -- cgit v1.2.3 From 0e91398f2a5d4eb6b07df8115917d0d1cf3e9b58 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:27 +0100 Subject: xen: implement save/restore This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/linux/page-flags.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 590cff32415..02955a1c3d7 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -157,6 +157,7 @@ PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active) __PAGEFLAG(Slab, slab) PAGEFLAG(Checked, owner_priv_1) /* Used by some filesystems */ PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */ +PAGEFLAG(SavePinned, dirty); /* Xen */ PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved) PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private) __SETPAGEFLAG(Private, private) -- cgit v1.2.3 From cc1a9d86ce989083703c4bdc11b75a87e1cc404a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 8 Jun 2008 19:39:16 -0700 Subject: mm, x86: shrink_active_range() should check all Now we are using register_e820_active_regions() instead of add_active_range() directly. So end_pfn could be different between the value in early_node_map to node_end_pfn. So we need to make shrink_active_range() smarter. shrink_active_range() is a generic MM function in mm/page_alloc.c but it is only used on 32-bit x86. Should we move it back to some file in arch/x86? Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/linux/mm.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index c31a9cd2a30..7cbd949f251 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -997,8 +997,7 @@ extern void free_area_init_node(int nid, pg_data_t *pgdat, extern void free_area_init_nodes(unsigned long *max_zone_pfn); extern void add_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); -extern void shrink_active_range(unsigned int nid, unsigned long old_end_pfn, - unsigned long new_end_pfn); +extern void shrink_active_range(unsigned int nid, unsigned long new_end_pfn); extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); extern void remove_all_active_ranges(void); -- cgit v1.2.3 From 3da757daf86e498872855f0b5e101f763ba79499 Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Fri, 20 Jun 2008 15:06:33 -0700 Subject: x86: use cpu_khz for loops_per_jiffy calculation On the x86 platform we can use the value of tsc_khz computed during tsc calibration to calculate the loops_per_jiffy value. Its very important to keep the error in lpj values to minimum as any error in that may result in kernel panic in check_timer. In virtualization environment, On a highly overloaded host the guest delay calibration may sometimes result in errors beyond the ~50% that timer_irq_works can handle, resulting in the guest panicking. Does some formating changes to lpj_setup code to now have a single printk to print the bogomips value. We do this only for the boot processor because the AP's can have different base frequencies or the BIOS might boot a AP at a different frequency. Signed-off-by: Alok N Kataria Cc: Arjan van de Ven Cc: Daniel Hecht Cc: Tim Mann Cc: Zach Amsden Cc: Sahil Rihan Signed-off-by: Ingo Molnar --- include/linux/delay.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/delay.h b/include/linux/delay.h index 54552d21296..01aec60590a 100644 --- a/include/linux/delay.h +++ b/include/linux/delay.h @@ -41,6 +41,7 @@ static inline void ndelay(unsigned long x) #define ndelay(x) ndelay(x) #endif +extern unsigned long lpj_tsc; void calibrate_delay(void); void msleep(unsigned int msecs); unsigned long msleep_interruptible(unsigned int msecs); -- cgit v1.2.3 From f3f3149f35b9195ef4b761b1353fc0766b5f53be Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Mon, 23 Jun 2008 18:21:56 -0700 Subject: x86: use cpu_khz for loops_per_jiffy calculation, cleanup As suggested by Ingo, remove all references to tsc from init/calibrate.c TSC is x86 specific, and using tsc in variable names in a generic file should be avoided. lpj_tsc is now called lpj_fine, since it is related to fine tuning of lpj value. Also tsc_rate_* is called timer_rate_* Signed-off-by: Alok N Kataria Cc: Arjan van de Ven Cc: Daniel Hecht Cc: Tim Mann Cc: Zach Amsden Cc: Sahil Rihan Signed-off-by: Ingo Molnar --- include/linux/delay.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/delay.h b/include/linux/delay.h index 01aec60590a..fd832c6d419 100644 --- a/include/linux/delay.h +++ b/include/linux/delay.h @@ -41,7 +41,7 @@ static inline void ndelay(unsigned long x) #define ndelay(x) ndelay(x) #endif -extern unsigned long lpj_tsc; +extern unsigned long lpj_fine; void calibrate_delay(void); void msleep(unsigned int msecs); unsigned long msleep_interruptible(unsigned int msecs); -- cgit v1.2.3 From d2dbf343329dc777d77488743465f7be4245971d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 13 Jun 2008 02:00:56 -0700 Subject: x86: clean up reserve_bootmem_generic() and port it to 32-bit 1. add reserve_bootmem_generic for 32bit 2. change len to unsigned long 3. make early_res_to_bootmem to use it Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/linux/bootmem.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 686895bacd9..a1d9b79078e 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -84,6 +84,8 @@ extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags); __alloc_bootmem_low(x, PAGE_SIZE, 0) #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ +extern int reserve_bootmem_generic(unsigned long addr, unsigned long size, + int flags); extern unsigned long free_all_bootmem(void); extern unsigned long free_all_bootmem_node(pg_data_t *pgdat); extern void *__alloc_bootmem_node(pg_data_t *pgdat, -- cgit v1.2.3 From cc1050bafebfb1d7935331282e948b5016318192 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 13 Jun 2008 19:08:52 -0700 Subject: x86: replace shrink_active_range() with remove_active_range() in case we have kva before ramdisk on a node, we still need to use those ranges. v2: reserve_early kva ram area, in case there are holes in highmem, to avoid those area could be treat as free high pages. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/linux/mm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index ce8e397a61f..034a3156d2f 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -998,7 +998,8 @@ extern void free_area_init_node(int nid, pg_data_t *pgdat, extern void free_area_init_nodes(unsigned long *max_zone_pfn); extern void add_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); -extern void shrink_active_range(unsigned int nid, unsigned long new_end_pfn); +extern void remove_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); extern void remove_all_active_ranges(void); -- cgit v1.2.3 From b5bc6c0e55000dab86b73f838f5ad02908b23755 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 14 Jun 2008 18:32:52 -0700 Subject: x86, mm: use add_highpages_with_active_regions() for high pages init v2 use early_node_map to init high pages, so we can remove page_is_ram() and page_is_reserved_early() in the big loop with add_one_highpage also remove page_is_reserved_early(), it is not needed anymore. v2: fix the build of other platforms Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/linux/mm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 034a3156d2f..e4de460907c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1011,6 +1011,8 @@ extern unsigned long find_min_pfn_with_active_regions(void); extern unsigned long find_max_pfn_with_active_regions(void); extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); +typedef void (*work_fn_t)(unsigned long, unsigned long, void *); +extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data); extern void sparse_memory_present_with_active_regions(int nid); #ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID extern int early_pfn_to_nid(unsigned long pfn); -- cgit v1.2.3 From 3461b0af025251bbc6b3d56c821c6ac2de6f7209 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:13 +0200 Subject: x86: remove static boot_cpu_pda array v2 * Remove the boot_cpu_pda array and pointer table from the data section. Allocate the pointer table and array during init. do_boot_cpu() will reallocate the pda in node local memory and if the cpu is being brought up before the bootmem array is released (after_bootmem = 0), then it will free the initial pda. This will happen for all cpus present at system startup. This removes 512k + 32k bytes from the data section. For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 586a943cab0..0ea48a5af82 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1024,6 +1024,7 @@ extern void mem_init(void); extern void show_mem(void); extern void si_meminfo(struct sysinfo * val); extern void si_meminfo_node(struct sysinfo *val, int nid); +extern int after_bootmem; #ifdef CONFIG_NUMA extern void setup_per_cpu_pageset(void); -- cgit v1.2.3 From a7bf0bd5e6af7fe69342dabf2a3b721f0163469a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 28 May 2008 15:02:14 +0100 Subject: build: add __page_aligned_data and __page_aligned_bss Making a variable page-aligned by using __attribute__((section(".data.page_aligned"))) is fragile because if sizeof(variable) is not also a multiple of page size, it leaves variables in the remainder of the section unaligned. This patch introduces two new qualifiers, __page_aligned_data and __page_aligned_bss to set the section *and* the alignment of variables. This makes page-aligned variables more robust because the linker will make sure they're aligned properly. Unfortunately it requires *all* page-aligned data to use these macros... Signed-off-by: Ingo Molnar --- include/linux/linkage.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 2119610b24f..9fd1f859021 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -1,6 +1,7 @@ #ifndef _LINUX_LINKAGE_H #define _LINUX_LINKAGE_H +#include #include #ifdef __cplusplus @@ -17,6 +18,9 @@ # define asmregparm #endif +#define __page_aligned_data __section(.data.page_aligned) __aligned(PAGE_SIZE) +#define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE) + /* * This is used by architectures to keep arguments on the stack * untouched by the compiler by keeping them live until the end. -- cgit v1.2.3 From d52d53b8a5b258bfaab9223a5e7284fcfdd48577 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 16 Jun 2008 20:10:55 -0700 Subject: RFC x86: try to remove arch_get_ram_range want to remove arch_get_ram_range, and use early_node_map instead. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/linux/mm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 3d647b24041..cf1cd3a2ed7 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1011,7 +1011,7 @@ extern unsigned long find_min_pfn_with_active_regions(void); extern unsigned long find_max_pfn_with_active_regions(void); extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); -typedef void (*work_fn_t)(unsigned long, unsigned long, void *); +typedef int (*work_fn_t)(unsigned long, unsigned long, void *); extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data); extern void sparse_memory_present_with_active_regions(int nid); #ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -- cgit v1.2.3 From 3c999f142665265afd0fe9190204dd051f17e505 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 20 Jun 2008 16:11:20 -0700 Subject: x86: check command line when CONFIG_X86_MPPARSE is not set, v2 if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic. Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: "Maciej W. Rozycki" Signed-off-by: Ingo Molnar --- include/linux/acpi.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 41f7ce7edd7..0601075d09a 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -82,6 +82,7 @@ char * __acpi_map_table (unsigned long phys_addr, unsigned long size); int early_acpi_boot_init(void); int acpi_boot_init (void); int acpi_boot_table_init (void); +int acpi_mps_check (void); int acpi_numa_init (void); int acpi_table_init (void); @@ -250,6 +251,11 @@ static inline int acpi_boot_table_init(void) return 0; } +static inline int acpi_mps_check(void) +{ + return 0; +} + static inline int acpi_check_resource_conflict(struct resource *res) { return 0; -- cgit v1.2.3 From 69ac9cd629ca96e59f34eb4ccd12d00b2c8276a7 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Fri, 27 Jun 2008 13:12:54 +0200 Subject: sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle Acked-by: Greg KH Acked-by: Vivek Goyal Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar --- include/linux/firmware-map.h | 74 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 include/linux/firmware-map.h (limited to 'include/linux') diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h new file mode 100644 index 00000000000..acbdbcc1605 --- /dev/null +++ b/include/linux/firmware-map.h @@ -0,0 +1,74 @@ +/* + * include/linux/firmware-map.h: + * Copyright (C) 2008 SUSE LINUX Products GmbH + * by Bernhard Walle + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef _LINUX_FIRMWARE_MAP_H +#define _LINUX_FIRMWARE_MAP_H + +#include +#include + +/* + * provide a dummy interface if CONFIG_FIRMWARE_MEMMAP is disabled + */ +#ifdef CONFIG_FIRMWARE_MEMMAP + +/** + * Adds a firmware mapping entry. This function uses kmalloc() for memory + * allocation. Use firmware_map_add_early() if you want to use the bootmem + * allocator. + * + * That function must be called before late_initcall. + * + * @start: Start of the memory range. + * @end: End of the memory range (inclusive). + * @type: Type of the memory range. + * + * Returns 0 on success, or -ENOMEM if no memory could be allocated. + */ +int firmware_map_add(resource_size_t start, resource_size_t end, + const char *type); + +/** + * Adds a firmware mapping entry. This function uses the bootmem allocator + * for memory allocation. Use firmware_map_add() if you want to use kmalloc(). + * + * That function must be called before late_initcall. + * + * @start: Start of the memory range. + * @end: End of the memory range (inclusive). + * @type: Type of the memory range. + * + * Returns 0 on success, or -ENOMEM if no memory could be allocated. + */ +int firmware_map_add_early(resource_size_t start, resource_size_t end, + const char *type); + +#else /* CONFIG_FIRMWARE_MEMMAP */ + +static inline int firmware_map_add(resource_size_t start, resource_size_t end, + const char *type) +{ + return 0; +} + +static inline int firmware_map_add_early(resource_size_t start, + resource_size_t end, const char *type) +{ + return 0; +} + +#endif /* CONFIG_FIRMWARE_MEMMAP */ + +#endif /* _LINUX_FIRMWARE_MAP_H */ -- cgit v1.2.3