From 36d6825b91bc492b65b6333c369cd96a2fc8c903 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 May 2008 12:55:26 +0200 Subject: mac80211: let drivers wake but not start queues Having drivers start queues is just confusing, their ->start() callback can block and do whatever is necessary, so let mac80211 start queues and have drivers wake queues when necessary (to get packets flowing again right away.) Signed-off-by: Johannes Berg Acked-by: David S. Miller Signed-off-by: John W. Linville --- include/net/mac80211.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 909956c97c4..f00fc76a734 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1566,14 +1566,6 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue); */ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); -/** - * ieee80211_start_queues - start all queues - * @hw: pointer to as obtained from ieee80211_alloc_hw(). - * - * Drivers should use this function instead of netif_start_queue. - */ -void ieee80211_start_queues(struct ieee80211_hw *hw); - /** * ieee80211_stop_queues - stop all queues * @hw: pointer as obtained from ieee80211_alloc_hw(). -- cgit v1.2.3 From 2e92e6f2c50b4baf85cca968f0e6f1b5c0df7d39 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 May 2008 12:55:27 +0200 Subject: mac80211: use rate index in TX control This patch modifies struct ieee80211_tx_control to give band info and the rate index (instead of rate pointers) to drivers. This mostly serves to reduce the TX control structure size to make it fit into skb->cb so that the fragmentation code can put it there and we can think about passing it to drivers that way in the future. The rt2x00 driver update was done by Ivo, thanks. Signed-off-by: Ivo van Doorn Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 51 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 12 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index f00fc76a734..0df91bea6c1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -266,27 +266,26 @@ enum mac80211_tx_control_flags { * ieee80211_ops->remove_interface() callback funtion. * The hw_key pointer is valid until it has been removed with the * ieee80211_ops->set_key() callback function. - * The tx_rate and alt_retry_rate pointers are valid until the phy is - * deregistered. */ struct ieee80211_tx_control { - struct ieee80211_vif *vif; - struct ieee80211_rate *tx_rate; + u32 flags; /* tx control flags defined above */ + + s8 tx_rate_idx, /* Transmit rate (indexes registered rates) */ + rts_cts_rate_idx, /* Transmit rate for RTS/CTS frame */ + alt_retry_rate_idx; /* retry rate for the last retries */ - /* Transmit rate for RTS/CTS frame */ - struct ieee80211_rate *rts_cts_rate; + s8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. + * This could be used when set_retry_limit + * is not implemented by the driver */ - /* retry rate for the last retries */ - struct ieee80211_rate *alt_retry_rate; + struct ieee80211_vif *vif; /* Key used for hardware encryption * NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ struct ieee80211_key_conf *hw_key; - u32 flags; /* tx control flags defined above */ - u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. - * This could be used when set_retry_limit - * is not implemented by the driver */ + enum ieee80211_band band; + u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit * position represents antenna number used */ u8 icv_len; /* length of the ICV/MIC field in octets */ @@ -298,6 +297,7 @@ struct ieee80211_tx_control { }; + /** * enum mac80211_rx_flags - receive flags * @@ -823,6 +823,33 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); } +static inline struct ieee80211_rate * +ieee80211_get_tx_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_control *c) +{ + if (WARN_ON(c->tx_rate_idx < 0)) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_control *c) +{ + if (c->rts_cts_rate_idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->rts_cts_rate_idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_control *c) +{ + if (c->alt_retry_rate_idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->alt_retry_rate_idx]; +} + /** * DOC: Hardware crypto acceleration * -- cgit v1.2.3 From e039fa4a4195ac4ee895e6f3d1334beed63256fe Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 May 2008 12:55:29 +0200 Subject: mac80211: move TX info into skb->cb This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn Signed-off-by: Johannes Berg Acked-by: David S. Miller Signed-off-by: John W. Linville --- include/net/mac80211.h | 299 ++++++++++++++++++++++--------------------------- 1 file changed, 133 insertions(+), 166 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0df91bea6c1..54960b83db7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -201,101 +201,127 @@ struct ieee80211_bss_conf { }; /** - * enum mac80211_tx_control_flags - flags to describe Tx configuration for - * the Tx frame - * - * These flags are used with the @flags member of &ieee80211_tx_control - * - * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption; - * e.g., for EAPOL frame - * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) - * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TXCTL_RATE_CTRL_PROBE - * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter - * for destination station - * @IEEE80211_TXCTL_REQUEUE: - * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long - * retry value - * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211 - * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon - * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted - * from antenna_sel_tx, so if 1 antenna is marked - * use SISO, 2 antennas marked use MIMO, n antennas - * marked use MIMO_n. - * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval + * enum mac80211_tx_flags - flags to transmission information/status + * + * These flags are used with the @flags member of &ieee80211_tx_info + * + * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. + * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; + * e.g., for EAPOL frame + * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame + * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., + * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE + * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination + * station + * @IEEE80211_TX_CTL_REQUEUE: + * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame + * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the + * through set_retry_limit configured long retry value + * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 + * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon + * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU + * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number + * of streams when this flag is on can be extracted from antenna_sel_tx, + * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n + * antennas marked use MIMO_n. + * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame + * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width + * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels + * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval + * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted + * because the destination STA was in powersave mode. + * @IEEE80211_TX_STAT_ACK: Frame was acknowledged + * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status + * is for the whole aggregation. */ enum mac80211_tx_control_flags { - IEEE80211_TXCTL_REQ_TX_STATUS = (1<<0), - IEEE80211_TXCTL_DO_NOT_ENCRYPT = (1<<1), - IEEE80211_TXCTL_USE_RTS_CTS = (1<<2), - IEEE80211_TXCTL_USE_CTS_PROTECT = (1<<3), - IEEE80211_TXCTL_NO_ACK = (1<<4), - IEEE80211_TXCTL_RATE_CTRL_PROBE = (1<<5), - IEEE80211_TXCTL_CLEAR_PS_FILT = (1<<6), - IEEE80211_TXCTL_REQUEUE = (1<<7), - IEEE80211_TXCTL_FIRST_FRAGMENT = (1<<8), - IEEE80211_TXCTL_SHORT_PREAMBLE = (1<<9), - IEEE80211_TXCTL_LONG_RETRY_LIMIT = (1<<10), - IEEE80211_TXCTL_EAPOL_FRAME = (1<<11), - IEEE80211_TXCTL_SEND_AFTER_DTIM = (1<<12), - IEEE80211_TXCTL_AMPDU = (1<<13), - IEEE80211_TXCTL_OFDM_HT = (1<<14), - IEEE80211_TXCTL_GREEN_FIELD = (1<<15), - IEEE80211_TXCTL_40_MHZ_WIDTH = (1<<16), - IEEE80211_TXCTL_DUP_DATA = (1<<17), - IEEE80211_TXCTL_SHORT_GI = (1<<18), + IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), + IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1), + IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), + IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), + IEEE80211_TX_CTL_NO_ACK = BIT(4), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), + IEEE80211_TX_CTL_REQUEUE = BIT(7), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), + IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), + IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), + IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), + IEEE80211_TX_CTL_AMPDU = BIT(13), + IEEE80211_TX_CTL_OFDM_HT = BIT(14), + IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), + IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), + IEEE80211_TX_CTL_DUP_DATA = BIT(17), + IEEE80211_TX_CTL_SHORT_GI = BIT(18), + IEEE80211_TX_CTL_INJECTED = BIT(19), + IEEE80211_TX_STAT_TX_FILTERED = BIT(20), + IEEE80211_TX_STAT_ACK = BIT(21), + IEEE80211_TX_STAT_AMPDU = BIT(22), }; -/* Transmit control fields. This data structure is passed to low-level driver - * with each TX frame. The low-level driver is responsible for configuring - * the hardware to use given values (depending on what is supported). - * - * NOTE: Be careful with using the pointers outside of the ieee80211_ops->tx() - * context (i.e. when defering the work to a workqueue). - * The vif pointer is valid until the it has been removed with the - * ieee80211_ops->remove_interface() callback funtion. - * The hw_key pointer is valid until it has been removed with the - * ieee80211_ops->set_key() callback function. - */ -struct ieee80211_tx_control { - u32 flags; /* tx control flags defined above */ - - s8 tx_rate_idx, /* Transmit rate (indexes registered rates) */ - rts_cts_rate_idx, /* Transmit rate for RTS/CTS frame */ - alt_retry_rate_idx; /* retry rate for the last retries */ - - s8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. - * This could be used when set_retry_limit - * is not implemented by the driver */ - struct ieee80211_vif *vif; - - /* Key used for hardware encryption - * NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ - struct ieee80211_key_conf *hw_key; +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ + (sizeof(((struct sk_buff *)0)->cb) - 8) +#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ + (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) - enum ieee80211_band band; +/** + * struct ieee80211_tx_info - skb transmit information + * + * This structure is placed in skb->cb for three uses: + * (1) mac80211 TX control - mac80211 tells the driver what to do + * (2) driver internal use (if applicable) + * (3) TX status information - driver tells mac80211 what happened + * + * @flags: transmit info flags, defined above + * @retry_count: number of retries + * @excessive_retries: set to 1 if the frame was retried many times + * but not acknowledged + * @ampdu_ack_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ampdu_ack_map: block ack bit map for the aggregation. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ack_signal: signal strength of the ACK frame + */ +struct ieee80211_tx_info { + /* common information */ + u32 flags; + u8 band; + s8 tx_rate_idx; + u8 antenna_sel_tx; - u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit - * position represents antenna number used */ - u8 icv_len; /* length of the ICV/MIC field in octets */ - u8 iv_len; /* length of the IV field in octets */ - u16 queue; /* hardware queue to use for this frame; - * 0 = highest, hw->queues-1 = lowest */ - u16 aid; /* Station AID */ - int type; /* internal */ + u8 queue; /* use skb_queue_mapping soon */ + + union { + struct { + struct ieee80211_vif *vif; + struct ieee80211_key_conf *hw_key; + unsigned long jiffies; + int ifindex; + u16 aid; + s8 rts_cts_rate_idx, alt_retry_rate_idx; + u8 retry_limit; + u8 icv_len; + u8 iv_len; + } control; + struct { + u64 ampdu_ack_map; + int ack_signal; + u8 retry_count; + bool excessive_retries; + u8 ampdu_ack_len; + } status; + void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + }; }; +static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) +{ + return (struct ieee80211_tx_info *)skb->cb; +} /** @@ -362,52 +388,6 @@ struct ieee80211_rx_status { int flag; }; -/** - * enum ieee80211_tx_status_flags - transmit status flags - * - * Status flags to indicate various transmit conditions. - * - * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted - * because the destination STA was in powersave mode. - * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged - * @IEEE80211_TX_STATUS_AMPDU: The frame was aggregated, so status - * is for the whole aggregation. - */ -enum ieee80211_tx_status_flags { - IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, - IEEE80211_TX_STATUS_ACK = 1<<1, - IEEE80211_TX_STATUS_AMPDU = 1<<2, -}; - -/** - * struct ieee80211_tx_status - transmit status - * - * As much information as possible should be provided for each transmitted - * frame with ieee80211_tx_status(). - * - * @control: a copy of the &struct ieee80211_tx_control passed to the driver - * in the tx() callback. - * @flags: transmit status flags, defined above - * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged - * @ampdu_ack_len: number of aggregated frames. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ampdu_ack_map: block ack bit map for the aggregation. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ack_signal: signal strength of the ACK frame either in dBm, dB or unspec - * depending on hardware capabilites flags @IEEE80211_HW_SIGNAL_* - */ -struct ieee80211_tx_status { - struct ieee80211_tx_control control; - u8 flags; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; - u64 ampdu_ack_map; - int ack_signal; -}; - /** * enum ieee80211_conf_flags - configuration flags * @@ -563,7 +543,6 @@ struct ieee80211_if_conf { u8 *ssid; size_t ssid_len; struct sk_buff *beacon; - struct ieee80211_tx_control *beacon_control; }; /** @@ -825,7 +804,7 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { if (WARN_ON(c->tx_rate_idx < 0)) return NULL; @@ -834,20 +813,20 @@ ieee80211_get_tx_rate(const struct ieee80211_hw *hw, static inline struct ieee80211_rate * ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { - if (c->rts_cts_rate_idx < 0) + if (c->control.rts_cts_rate_idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->rts_cts_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx]; } static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { - if (c->alt_retry_rate_idx < 0) + if (c->control.alt_retry_rate_idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->alt_retry_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.alt_retry_rate_idx]; } /** @@ -1142,8 +1121,7 @@ enum ieee80211_ampdu_mlme_action { * that TX/RX_STOP can pass NULL for this parameter. */ struct ieee80211_ops { - int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); + int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); int (*start)(struct ieee80211_hw *hw); void (*stop)(struct ieee80211_hw *hw); int (*add_interface)(struct ieee80211_hw *hw, @@ -1187,8 +1165,7 @@ struct ieee80211_ops { u64 (*get_tsf)(struct ieee80211_hw *hw); void (*reset_tsf)(struct ieee80211_hw *hw); int (*beacon_update)(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_control *control); + struct sk_buff *skb); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, @@ -1384,13 +1361,9 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** * ieee80211_tx_status_irqsafe - irq-safe transmit status callback @@ -1403,13 +1376,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** * ieee80211_beacon_get - beacon generation function @@ -1425,8 +1394,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, * is responsible of freeing it. */ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); + struct ieee80211_vif *vif); /** * ieee80211_rts_get - RTS frame generation function @@ -1434,7 +1402,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the RTS. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @rts: The buffer where to store the RTS frame. * * If the RTS frames are generated by the host system (i.e., not in @@ -1444,7 +1412,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, */ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_rts *rts); /** @@ -1452,7 +1420,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the RTS. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the RTS is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1460,7 +1428,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, */ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_ctstoself_get - CTS-to-self frame generation function @@ -1468,7 +1436,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the CTS-to-self. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @cts: The buffer where to store the CTS-to-self frame. * * If the CTS-to-self frames are generated by the host system (i.e., not in @@ -1479,7 +1447,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_cts *cts); /** @@ -1487,7 +1455,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the CTS-to-self is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1496,7 +1464,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_generic_frame_duration - Calculate the duration field for a frame @@ -1535,8 +1503,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, * use common code for all beacons. */ struct sk_buff * -ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** * ieee80211_get_hdrlen_from_skb - get header length from data -- cgit v1.2.3 From eefce91a384a64c7bbf913eb08c4adfb911c3639 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 17 May 2008 00:57:13 +0200 Subject: mac80211: dont allow fragmentation and requeuing on A-MPDU queues There really is no reason for a driver to reject a frame on an A-MPDU queue when it can stop that queue for any period of time and is given frames one by one. Hence, disallow it with a big warning and reduce mac80211-internal state. Also add a warning when we try to fragment a frame destined for an A-MPDU queue and drop it, the actual bug needs to be fixed elsewhere but I'm not exactly sure how to yet. Signed-off-by: Johannes Berg Cc: Ron Rindjunsky Signed-off-by: John W. Linville --- include/net/mac80211.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 54960b83db7..4df39eb9115 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -986,8 +986,10 @@ enum ieee80211_ampdu_mlme_action { * @tx: Handler that 802.11 module calls for each transmitted frame. * skb contains the buffer starting from the IEEE 802.11 header. * The low-level driver should send the frame out based on - * configuration in the TX control data. Must be implemented and - * atomic. + * configuration in the TX control data. This handler should, + * preferably, never fail and stop queues appropriately, more + * importantly, however, it must never fail for A-MPDU-queues. + * Must be implemented and atomic. * * @start: Called before the first netdevice attached to the hardware * is enabled. This should turn on the hardware and must turn on -- cgit v1.2.3 From e2530083609148a7835b54c431f6b8956407c1f6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 17 May 2008 00:57:14 +0200 Subject: mac80211: use multi-queue master netdevice This patch updates mac80211 and drivers to be multi-queue aware and use that instead of the internal queue mapping. Also does a number of cleanups in various pieces of the code that fall out and reduces internal mac80211 state size. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4df39eb9115..c80e3be8f79 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -293,7 +293,7 @@ struct ieee80211_tx_info { s8 tx_rate_idx; u8 antenna_sel_tx; - u8 queue; /* use skb_queue_mapping soon */ + /* 1 byte hole */ union { struct { @@ -802,6 +802,24 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); } +static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_QOS + return hw->queues; +#else + return 1; +#endif +} + +static inline int ieee80211_num_queues(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_QOS + return hw->queues + hw->ampdu_queues; +#else + return 1; +#endif +} + static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) -- cgit v1.2.3 From 9306102ea5696a3815f8d24ac0c0fbd1e19be7d3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 29 May 2008 16:35:23 +0800 Subject: mac80211: allow disable FAT in specific configurations This patch allows to disable FAT channel in specific configurations. For example the configuration (8, +1), (primary channel 8, extension channel 12) isn't permitted in U.S., but (8, -1), (primary channel 8, extension channel 4) is. When FAT channel configuration is not permitted, FAT channel should be reported as not supported in the capabilities of the HT IE in association request. And sssociation is performed on 20Mhz channel. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- include/net/wireless.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/net') diff --git a/include/net/wireless.h b/include/net/wireless.h index 667b4080d30..9324f8dd183 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -39,12 +39,18 @@ enum ieee80211_band { * on this channel. * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. + * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel + * is not permitted. + * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel + * is not permitted. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, IEEE80211_CHAN_NO_IBSS = 1<<2, IEEE80211_CHAN_RADAR = 1<<3, + IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4, + IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, }; /** -- cgit v1.2.3