From e535c7566e1318ccfa015e297f0309994f7bc078 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 23 May 2009 11:18:45 +0200 Subject: mac80211: deprecate conf.beacon_int properly Ivo has updated the driver to no longer use the change flag, so we can remove that, but rt2x00 and ath5k still use the actual value so let's mark it as deprecated too. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d72346ff324..0270aa6e08f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -527,7 +527,6 @@ enum ieee80211_conf_flags { * enum ieee80211_conf_changed - denotes which configuration changed * * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed - * @_IEEE80211_CONF_CHANGE_BEACON_INTERVAL: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed @@ -538,7 +537,6 @@ enum ieee80211_conf_flags { */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), - _IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), @@ -548,14 +546,6 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; -static inline __deprecated enum ieee80211_conf_changed -__IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void) -{ - return _IEEE80211_CONF_CHANGE_BEACON_INTERVAL; -} -#define IEEE80211_CONF_CHANGE_BEACON_INTERVAL \ - __IEEE80211_CONF_CHANGE_BEACON_INTERVAL() - /** * struct ieee80211_conf - configuration of the device * @@ -564,7 +554,7 @@ __IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void) * @flags: configuration flags defined above * * @radio_enabled: when zero, driver is required to switch off the radio. - * @beacon_int: beacon interval (TODO make interface config) + * @beacon_int: DEPRECATED, DO NOT USE * * @listen_interval: listen interval in units of beacon interval * @max_sleep_period: the maximum number of beacon intervals to sleep for @@ -589,7 +579,7 @@ __IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void) * number of transmissions not the number of retries */ struct ieee80211_conf { - int beacon_int; + int __deprecated beacon_int; u32 flags; int power_level, dynamic_ps_timeout; int max_sleep_period; -- cgit v1.2.3 From 19d337dff95cbf76edd3ad95c0cee2732c3e1ec5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:37 +0200 Subject: rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins Signed-off-by: Henrique de Moraes Holschuh [thinkpad] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/wimax.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'include/net') diff --git a/include/net/wimax.h b/include/net/wimax.h index 6b3824edb39..2af7bf839f2 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -253,7 +253,6 @@ struct net_device; struct genl_info; struct wimax_dev; -struct input_dev; /** * struct wimax_dev - Generic WiMAX device @@ -293,8 +292,8 @@ struct input_dev; * See wimax_reset()'s documentation. * * @name: [fill] A way to identify this device. We need to register a - * name with many subsystems (input for RFKILL, workqueue - * creation, etc). We can't use the network device name as that + * name with many subsystems (rfkill, workqueue creation, etc). + * We can't use the network device name as that * might change and in some instances we don't know it yet (until * we don't call register_netdev()). So we generate an unique one * using the driver name and device bus id, place it here and use @@ -316,9 +315,6 @@ struct input_dev; * * @rfkill: [private] integration into the RF-Kill infrastructure. * - * @rfkill_input: [private] virtual input device to process the - * hardware RF Kill switches. - * * @rf_sw: [private] State of the software radio switch (OFF/ON) * * @rf_hw: [private] State of the hardware radio switch (OFF/ON) -- cgit v1.2.3 From 7643a2c3fcc13cd6fbd731f214463547383418ae Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:39 +0200 Subject: cfg80211: move txpower wext from mac80211 This patch introduces new cfg80211 API to set the TX power via cfg80211, puts the wext code into cfg80211 and updates mac80211 to use all that. The -ENETDOWN bits are a hack but will go away soon. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/cfg80211.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f20da7d63b1..8b8e4b89362 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -751,6 +751,21 @@ enum wiphy_params_flags { WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, }; +/** + * enum tx_power_setting - TX power adjustment + * + * @TX_POWER_AUTOMATIC: the dbm parameter is ignored + * @TX_POWER_LIMITED: limit TX power by the dbm parameter + * @TX_POWER_FIXED: fix TX power to the dbm parameter + * @TX_POWER_OFF: turn off completely (will go away) + */ +enum tx_power_setting { + TX_POWER_AUTOMATIC, + TX_POWER_LIMITED, + TX_POWER_FIXED, + TX_POWER_OFF, +}; + /** * struct cfg80211_ops - backend description for wireless configuration * @@ -837,6 +852,11 @@ enum wiphy_params_flags { * @changed bitfield (see &enum wiphy_params_flags) describes which values * have changed. The actual parameter values are available in * struct wiphy. If returning an error, no value should be changed. + * + * @set_tx_power: set the transmit power according to the parameters + * @get_tx_power: store the current TX power into the dbm variable; + * return 0 if successful; or -ENETDOWN if successful but power + * is disabled (this will go away) */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -928,6 +948,10 @@ struct cfg80211_ops { int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); + + int (*set_tx_power)(struct wiphy *wiphy, + enum tx_power_setting type, int dbm); + int (*get_tx_power)(struct wiphy *wiphy, int *dbm); }; /* @@ -1451,6 +1475,12 @@ int cfg80211_wext_siwencode(struct net_device *dev, int cfg80211_wext_giwencode(struct net_device *dev, struct iw_request_info *info, struct iw_point *erq, char *keybuf); +int cfg80211_wext_siwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); +int cfg80211_wext_giwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); /* * callbacks for asynchronous cfg80211 methods, notification -- cgit v1.2.3 From 1f87f7d3a3b42b20f34cb03f0fd1a41c3d0e27f3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:41 +0200 Subject: cfg80211: add rfkill support To be easier on drivers and users, have cfg80211 register an rfkill structure that drivers can access. When soft-killed, simply take down all interfaces; when hard-killed the driver needs to notify us and we will take down the interfaces after the fact. While rfkilled, interfaces cannot be set UP. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/cfg80211.h | 29 +++++++++++++++++++++++++---- include/net/mac80211.h | 20 +++++++++++++++++--- 2 files changed, 42 insertions(+), 7 deletions(-) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8b8e4b89362..1a21895b732 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -757,13 +757,11 @@ enum wiphy_params_flags { * @TX_POWER_AUTOMATIC: the dbm parameter is ignored * @TX_POWER_LIMITED: limit TX power by the dbm parameter * @TX_POWER_FIXED: fix TX power to the dbm parameter - * @TX_POWER_OFF: turn off completely (will go away) */ enum tx_power_setting { TX_POWER_AUTOMATIC, TX_POWER_LIMITED, TX_POWER_FIXED, - TX_POWER_OFF, }; /** @@ -855,8 +853,10 @@ enum tx_power_setting { * * @set_tx_power: set the transmit power according to the parameters * @get_tx_power: store the current TX power into the dbm variable; - * return 0 if successful; or -ENETDOWN if successful but power - * is disabled (this will go away) + * return 0 if successful + * + * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting + * functions to adjust rfkill hw state */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -952,6 +952,8 @@ struct cfg80211_ops { int (*set_tx_power)(struct wiphy *wiphy, enum tx_power_setting type, int dbm); int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + + void (*rfkill_poll)(struct wiphy *wiphy); }; /* @@ -1666,4 +1668,23 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, */ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); +/** + * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state + * @wiphy: the wiphy + * @blocked: block status + */ +void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); + +/** + * wiphy_rfkill_start_polling - start polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_start_polling(struct wiphy *wiphy); + +/** + * wiphy_rfkill_stop_polling - stop polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_stop_polling(struct wiphy *wiphy); + #endif /* __NET_CFG80211_H */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0270aa6e08f..17d61d19d91 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -526,7 +526,7 @@ enum ieee80211_conf_flags { /** * enum ieee80211_conf_changed - denotes which configuration changed * - * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed + * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed @@ -536,7 +536,7 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed */ enum ieee80211_conf_changed { - IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), + _IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), @@ -546,6 +546,14 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; +static inline __deprecated enum ieee80211_conf_changed +__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void) +{ + return _IEEE80211_CONF_CHANGE_RADIO_ENABLED; +} +#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \ + __IEEE80211_CONF_CHANGE_RADIO_ENABLED() + /** * struct ieee80211_conf - configuration of the device * @@ -585,7 +593,7 @@ struct ieee80211_conf { int max_sleep_period; u16 listen_interval; - bool radio_enabled; + bool __deprecated radio_enabled; u8 long_frame_max_tx_count, short_frame_max_tx_count; @@ -1396,6 +1404,10 @@ enum ieee80211_ampdu_mlme_action { * is the first frame we expect to perform the action on. Notice * that TX/RX_STOP can pass NULL for this parameter. * Returns a negative error code on failure. + * + * @rfkill_poll: Poll rfkill hardware state. If you need this, you also + * need to set wiphy->rfkill_poll to %true before registration, + * and need to call wiphy_rfkill_set_hw_state() in the callback. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -1444,6 +1456,8 @@ struct ieee80211_ops { int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, struct ieee80211_sta *sta, u16 tid, u16 *ssn); + + void (*rfkill_poll)(struct ieee80211_hw *hw); }; /** -- cgit v1.2.3