From daa6eda65a53e5addf86c6bc829129ff51b08bda Mon Sep 17 00:00:00 2001 From: Gerd Knorr Date: Tue, 10 May 2005 10:59:13 +0200 Subject: [SCSI] add scsi changer driver This patch adds a device driver for scsi media changer devices. Signed-off-by: Gerd Knorr Signed-off-by: James Bottomley --- include/scsi/scsi.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/scsi') diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 659ecf48fb4..ca1e3b4a318 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -41,6 +41,7 @@ extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE]; #define FORMAT_UNIT 0x04 #define READ_BLOCK_LIMITS 0x05 #define REASSIGN_BLOCKS 0x07 +#define INITIALIZE_ELEMENT_STATUS 0x07 #define READ_6 0x08 #define WRITE_6 0x0a #define SEEK_6 0x0b @@ -65,6 +66,7 @@ extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE]; #define READ_10 0x28 #define WRITE_10 0x2a #define SEEK_10 0x2b +#define POSITION_TO_ELEMENT 0x2b #define WRITE_VERIFY 0x2e #define VERIFY 0x2f #define SEARCH_HIGH 0x30 @@ -97,6 +99,7 @@ extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE]; #define PERSISTENT_RESERVE_OUT 0x5f #define REPORT_LUNS 0xa0 #define MOVE_MEDIUM 0xa5 +#define EXCHANGE_MEDIUM 0xa6 #define READ_12 0xa8 #define WRITE_12 0xaa #define WRITE_VERIFY_12 0xae -- cgit v1.2.3 From 631e8a1398ce4cfef8b30678d51daf0c64313a09 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 16 May 2005 01:59:55 +0100 Subject: [SCSI] TYPE_RBC cache fixes (sbp2.c affected) a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off c) relevant places in midlayer and sd.c taught to accept TYPE_RBC d) sd.c::sd_read_cache_type() looks into page 6 when dealing with TYPE_RBC - these guys have writeback cache flag there and are not guaranteed to have page 8 at all. e) sd_read_cache_type() got an extra sanity check - it checks that it got the page it asked for before using its contents. And screams if mismatch had happened. Rationale: there are broken devices out there that are "helpful" enough to go for "I don't have a page you've asked for, here, have another one". For example, PL3507 had been caught doing just that... f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions in there are gone now. Incidentally, I wonder if USB storage devices that have no mode page 8 are simply RBC ones. I haven't touched that, but it might be interesting to check... Signed-off-by: Al Viro Signed-off-by: James Bottomley --- include/scsi/scsi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/scsi') diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index ca1e3b4a318..1fb23374151 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -213,6 +213,7 @@ static inline int scsi_status_is_good(int status) #define TYPE_COMM 0x09 /* Communications device */ #define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ #define TYPE_RAID 0x0c +#define TYPE_RBC 0x0e #define TYPE_NO_LUN 0x7f /* -- cgit v1.2.3 From a283bd37d00e92e8874ca6325ae071691d4db388 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 24 May 2005 12:06:38 -0500 Subject: [SCSI] Add target alloc/destroy callbacks to the host template This gives the HBA driver notice when a target is created and destroyed to allow it to manage its own target based allocations accordingly. This is a much reduced verson of the original patch sent in by James.Smart@Emulex.com Signed-off-by: James Bottomley --- include/scsi/scsi_device.h | 4 +++- include/scsi/scsi_host.h | 25 +++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 1 deletion(-) (limited to 'include/scsi') diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index c018020d916..63c91dd85ca 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -154,7 +154,9 @@ struct scsi_target { unsigned int id; /* target id ... replace * scsi_device.id eventually */ unsigned long create:1; /* signal that it needs to be added */ - unsigned long starget_data[0]; + void *hostdata; /* available to low-level driver */ + unsigned long starget_data[0]; /* for the transport */ + /* starget_data must be the last element!!!! */ } __attribute__((aligned(sizeof(unsigned long)))); #define to_scsi_target(d) container_of(d, struct scsi_target, dev) diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 1cee1e10094..db9914adeac 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -10,6 +10,7 @@ struct block_device; struct module; struct scsi_cmnd; struct scsi_device; +struct scsi_target; struct Scsi_Host; struct scsi_host_cmd_pool; struct scsi_transport_template; @@ -227,6 +228,30 @@ struct scsi_host_template { */ void (* slave_destroy)(struct scsi_device *); + /* + * Before the mid layer attempts to scan for a new device attached + * to a target where no target currently exists, it will call this + * entry in your driver. Should your driver need to allocate any + * structs or perform any other init items in order to send commands + * to a currently unused target, then this is where you can perform + * those allocations. + * + * Return values: 0 on success, non-0 on failure + * + * Status: OPTIONAL + */ + int (* target_alloc)(struct scsi_target *); + + /* + * Immediately prior to deallocating the target structure, and + * after all activity to attached scsi devices has ceased, the + * midlayer calls this point so that the driver may deallocate + * and terminate any references to the target. + * + * Status: OPTIONAL + */ + void (* target_destroy)(struct scsi_target *); + /* * fill in this function to allow the queue depth of this host * to be changeable (on a per device basis). returns either -- cgit v1.2.3 From c3e9dda4f5702ee5b346f4770de53f79e8ad1d8d Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 24 May 2005 16:57:31 -0500 Subject: [SCSI] allow the HBA to reserve target and device private areas This patch basically allows any HBA attached to the SPI transport class to declare an extra area which the mid-layer will allocate as part of its device and target allocations. Signed-off-by: James Bottomley --- include/scsi/scsi_transport.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include/scsi') diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h index 2dcee7a8475..a4f1837a33b 100644 --- a/include/scsi/scsi_transport.h +++ b/include/scsi/scsi_transport.h @@ -21,6 +21,7 @@ #define SCSI_TRANSPORT_H #include +#include struct scsi_transport_template { /* the attribute containers */ @@ -32,8 +33,11 @@ struct scsi_transport_template { * space of this size will be left at the end of the * scsi_* structure */ int device_size; + int device_private_offset; int target_size; + int target_private_offset; int host_size; + /* no private offset for the host; there's an alternative mechanism */ /* * True if the transport wants to use a host-based work-queue @@ -45,4 +49,38 @@ struct scsi_transport_template { dev_to_shost((tc)->dev) +/* Private area maintenance. The driver requested allocations come + * directly after the transport class allocations (if any). The idea + * is that you *must* call these only once. The code assumes that the + * initial values are the ones the transport specific code requires */ +static inline void +scsi_transport_reserve_target(struct scsi_transport_template * t, int space) +{ + BUG_ON(t->target_private_offset != 0); + t->target_private_offset = ALIGN(t->target_size, sizeof(void *)); + t->target_size = t->target_private_offset + space; +} +static inline void +scsi_transport_reserve_device(struct scsi_transport_template * t, int space) +{ + BUG_ON(t->device_private_offset != 0); + t->device_private_offset = ALIGN(t->device_size, sizeof(void *)); + t->device_size = t->device_private_offset + space; +} +static inline void * +scsi_transport_target_data(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + return (u8 *)starget->starget_data + + shost->transportt->target_private_offset; + +} +static inline void * +scsi_transport_device_data(struct scsi_device *sdev) +{ + struct Scsi_Host *shost = sdev->host; + return (u8 *)sdev->sdev_data + + shost->transportt->device_private_offset; +} + #endif /* SCSI_TRANSPORT_H */ -- cgit v1.2.3