From d04c56f73c30a5e593202ecfcf25ed43d42363a2 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 4 Oct 2006 16:47:49 +1000 Subject: [POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras --- include/asm-powerpc/hw_irq.h | 31 +++++++++++++++++++++---------- include/asm-powerpc/paca.h | 3 ++- 2 files changed, 23 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index d40359204ab..c4a1ab608f6 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -7,16 +7,30 @@ #ifdef __KERNEL__ #include +#include #include #include extern void timer_interrupt(struct pt_regs *); -#ifdef CONFIG_PPC_ISERIES +#ifdef CONFIG_PPC64 +#include + +static inline unsigned long local_get_flags(void) +{ + return get_paca()->soft_enabled; +} + +static inline unsigned long local_irq_disable(void) +{ + unsigned long flag = get_paca()->soft_enabled; + get_paca()->soft_enabled = 0; + barrier(); + return flag; +} -extern unsigned long local_get_flags(void); -extern unsigned long local_irq_disable(void); extern void local_irq_restore(unsigned long); +extern void iseries_handle_interrupts(void); #define local_irq_enable() local_irq_restore(1) #define local_save_flags(flags) ((flags) = local_get_flags()) @@ -24,17 +38,14 @@ extern void local_irq_restore(unsigned long); #define irqs_disabled() (local_get_flags() == 0) +#define hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) +#define hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) + #else #if defined(CONFIG_BOOKE) #define SET_MSR_EE(x) mtmsr(x) #define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") -#elif defined(__powerpc64__) -#define SET_MSR_EE(x) __mtmsrd(x, 1) -#define local_irq_restore(flags) do { \ - __asm__ __volatile__("": : :"memory"); \ - __mtmsrd((flags), 1); \ -} while(0) #else #define SET_MSR_EE(x) mtmsr(x) #define local_irq_restore(flags) mtmsr(flags) @@ -81,7 +92,7 @@ static inline void local_irq_save_ptr(unsigned long *flags) #define local_irq_save(flags) local_irq_save_ptr(&flags) #define irqs_disabled() ((mfmsr() & MSR_EE) == 0) -#endif /* CONFIG_PPC_ISERIES */ +#endif /* CONFIG_PPC64 */ #define mask_irq(irq) \ ({ \ diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h index 0a4e5c93e8e..0d3adc09c84 100644 --- a/include/asm-powerpc/paca.h +++ b/include/asm-powerpc/paca.h @@ -93,7 +93,8 @@ struct paca_struct { u64 stab_rr; /* stab/slb round-robin counter */ u64 saved_r1; /* r1 save for RTAS calls */ u64 saved_msr; /* MSR saved here by enter_rtas */ - u8 proc_enabled; /* irq soft-enable flag */ + u8 soft_enabled; /* irq soft-enable flag */ + u8 hard_enabled; /* set if irqs are enabled in MSR */ u8 io_sync; /* writel() needs spin_unlock sync */ /* Stuff for accurate time accounting */ -- cgit v1.2.3 From 0f03a43b8f0fc221986a46654282ec6a1e8c6d45 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 3 Oct 2006 16:57:44 +1000 Subject: [POWERPC] Remove todc code from ARCH=powerpc Apparently we've copied the todc drivers, for various RTCs used in embedded machines from ARCH=ppc to ARCH=powerpc, despite the fact that it's never used in the latter. This patch removes it. If we ever need these drivers (which we probably shouldn't now the RTC class stuff is in), we can transfer them one by one from ARCH=ppc, removing from the hideous abomination which is the todc "infrastructure". Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- include/asm-powerpc/todc.h | 487 --------------------------------------------- 1 file changed, 487 deletions(-) delete mode 100644 include/asm-powerpc/todc.h (limited to 'include') diff --git a/include/asm-powerpc/todc.h b/include/asm-powerpc/todc.h deleted file mode 100644 index 60a8c39b8c1..00000000000 --- a/include/asm-powerpc/todc.h +++ /dev/null @@ -1,487 +0,0 @@ -/* - * Definitions for the M48Txx and mc146818 series of Time of day/Real Time - * Clock chips. - * - * Author: Mark A. Greer - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips. - * Purpose is to make one generic file that handles all of these chips instead - * of every platform implementing the same code over & over again. - */ - -#ifndef __PPC_KERNEL_TODC_H -#define __PPC_KERNEL_TODC_H - -typedef struct { - uint rtc_type; /* your particular chip */ - - /* - * Following are the addresses of the AS0, AS1, and DATA registers - * of these chips. Note that these are board-specific. - */ - unsigned int nvram_as0; - unsigned int nvram_as1; - unsigned int nvram_data; - - /* - * Define bits to stop external set of regs from changing so - * the chip can be read/written reliably. - */ - unsigned char enable_read; - unsigned char enable_write; - - /* - * Following is the number of AS0 address bits. This is normally - * 8 but some bad hardware routes address lines incorrectly. - */ - int as0_bits; - - int nvram_size; /* Size of NVRAM on chip */ - int sw_flags; /* Software control flags */ - - /* Following are the register offsets for the particular chip */ - int year; - int month; - int day_of_month; - int day_of_week; - int hours; - int minutes; - int seconds; - int control_b; - int control_a; - int watchdog; - int interrupts; - int alarm_date; - int alarm_hour; - int alarm_minutes; - int alarm_seconds; - int century; - int flags; - - /* - * Some RTC chips have their NVRAM buried behind a addr/data pair of - * regs on the first level/clock registers. The following fields - * are the addresses for those addr/data regs. - */ - int nvram_addr_reg; - int nvram_data_reg; -} todc_info_t; - -/* - * Define the types of TODC/RTC variants that are supported in - * arch/ppc/kernel/todc_time.c - * Make a new one of these for any chip somehow differs from what's already - * defined. That way, if you ever need to put in code to touch those - * bits/registers in todc_time.c, you can put it inside an - * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break - * anyone else. - */ -#define TODC_TYPE_MK48T35 1 -#define TODC_TYPE_MK48T37 2 -#define TODC_TYPE_MK48T59 3 -#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */ -#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */ -#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */ -#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */ -#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */ -#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */ -#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */ -#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */ -#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */ -#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */ -#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */ - -/* - * Bit to clear/set to enable reads/writes to the chip - */ -#define TODC_MK48TXX_CNTL_A_R 0x40 -#define TODC_MK48TXX_CNTL_A_W 0x80 -#define TODC_MK48TXX_DAY_CB 0x80 - -#define TODC_DS1501_CNTL_B_TE 0x80 - -/* - * Define flag bits used by todc routines. - */ -#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001 - -/* - * Define the values for the various RTC's that should to into the todc_info - * table. - * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only - * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set. - */ -#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8 -#define TODC_TYPE_MK48T35_SW_FLAGS 0 -#define TODC_TYPE_MK48T35_YEAR 0x7fff -#define TODC_TYPE_MK48T35_MONTH 0x7ffe -#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */ -#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */ -#define TODC_TYPE_MK48T35_HOURS 0x7ffb -#define TODC_TYPE_MK48T35_MINUTES 0x7ffa -#define TODC_TYPE_MK48T35_SECONDS 0x7ff9 -#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9 -#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8 -#define TODC_TYPE_MK48T35_WATCHDOG 0x0000 -#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000 -#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000 -#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000 -#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000 -#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000 -#define TODC_TYPE_MK48T35_CENTURY 0x0000 -#define TODC_TYPE_MK48T35_FLAGS 0x0000 -#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0 - -#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0 -#define TODC_TYPE_MK48T37_SW_FLAGS 0 -#define TODC_TYPE_MK48T37_YEAR 0x7fff -#define TODC_TYPE_MK48T37_MONTH 0x7ffe -#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */ -#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */ -#define TODC_TYPE_MK48T37_HOURS 0x7ffb -#define TODC_TYPE_MK48T37_MINUTES 0x7ffa -#define TODC_TYPE_MK48T37_SECONDS 0x7ff9 -#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9 -#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8 -#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7 -#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6 -#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5 -#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4 -#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3 -#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2 -#define TODC_TYPE_MK48T37_CENTURY 0x7ff1 -#define TODC_TYPE_MK48T37_FLAGS 0x7ff0 -#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0 - -#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0 -#define TODC_TYPE_MK48T59_SW_FLAGS 0 -#define TODC_TYPE_MK48T59_YEAR 0x1fff -#define TODC_TYPE_MK48T59_MONTH 0x1ffe -#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_MK48T59_HOURS 0x1ffb -#define TODC_TYPE_MK48T59_MINUTES 0x1ffa -#define TODC_TYPE_MK48T59_SECONDS 0x1ff9 -#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9 -#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8 -#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff -#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff -#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff -#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff -#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff -#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff -#define TODC_TYPE_MK48T59_CENTURY 0x1fff -#define TODC_TYPE_MK48T59_FLAGS 0x1fff -#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100 -#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM -#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06) -#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05) -#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04) -#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03) -#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02) -#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01) -#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00) -#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) -#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) -#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b) -#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a) -#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09) -#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08) -#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07) -#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10 -#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13 - -#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0 -#define TODC_TYPE_DS1553_SW_FLAGS 0 -#define TODC_TYPE_DS1553_YEAR 0x1fff -#define TODC_TYPE_DS1553_MONTH 0x1ffe -#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1553_HOURS 0x1ffb -#define TODC_TYPE_DS1553_MINUTES 0x1ffa -#define TODC_TYPE_DS1553_SECONDS 0x1ff9 -#define TODC_TYPE_DS1553_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7 -#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6 -#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5 -#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4 -#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3 -#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2 -#define TODC_TYPE_DS1553_CENTURY 0x1ff8 -#define TODC_TYPE_DS1553_FLAGS 0x1ff0 -#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0 -#define TODC_TYPE_DS1557_SW_FLAGS 0 -#define TODC_TYPE_DS1557_YEAR 0x7ffff -#define TODC_TYPE_DS1557_MONTH 0x7fffe -#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */ -#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */ -#define TODC_TYPE_DS1557_HOURS 0x7fffb -#define TODC_TYPE_DS1557_MINUTES 0x7fffa -#define TODC_TYPE_DS1557_SECONDS 0x7fff9 -#define TODC_TYPE_DS1557_CNTL_B 0x7fff9 -#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7 -#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6 -#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5 -#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4 -#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3 -#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2 -#define TODC_TYPE_DS1557_CENTURY 0x7fff8 -#define TODC_TYPE_DS1557_FLAGS 0x7fff0 -#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8 -#define TODC_TYPE_DS1643_SW_FLAGS 0 -#define TODC_TYPE_DS1643_YEAR 0x1fff -#define TODC_TYPE_DS1643_MONTH 0x1ffe -#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1643_HOURS 0x1ffb -#define TODC_TYPE_DS1643_MINUTES 0x1ffa -#define TODC_TYPE_DS1643_SECONDS 0x1ff9 -#define TODC_TYPE_DS1643_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1643_WATCHDOG 0x1fff -#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff -#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff -#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff -#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff -#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff -#define TODC_TYPE_DS1643_CENTURY 0x1ff8 -#define TODC_TYPE_DS1643_FLAGS 0x1fff -#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */ -#define TODC_TYPE_DS1693_SW_FLAGS 0 -#define TODC_TYPE_DS1693_YEAR 0x09 -#define TODC_TYPE_DS1693_MONTH 0x08 -#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_DS1693_HOURS 0x04 -#define TODC_TYPE_DS1693_MINUTES 0x02 -#define TODC_TYPE_DS1693_SECONDS 0x00 -#define TODC_TYPE_DS1693_CNTL_B 0x0b -#define TODC_TYPE_DS1693_CNTL_A 0x0a -#define TODC_TYPE_DS1693_WATCHDOG 0xff -#define TODC_TYPE_DS1693_INTERRUPTS 0xff -#define TODC_TYPE_DS1693_ALARM_DATE 0x49 -#define TODC_TYPE_DS1693_ALARM_HOUR 0x05 -#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03 -#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01 -#define TODC_TYPE_DS1693_CENTURY 0x48 -#define TODC_TYPE_DS1693_FLAGS 0xff -#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8 -#define TODC_TYPE_DS1743_SW_FLAGS 0 -#define TODC_TYPE_DS1743_YEAR 0x1fff -#define TODC_TYPE_DS1743_MONTH 0x1ffe -#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1743_HOURS 0x1ffb -#define TODC_TYPE_DS1743_MINUTES 0x1ffa -#define TODC_TYPE_DS1743_SECONDS 0x1ff9 -#define TODC_TYPE_DS1743_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1743_WATCHDOG 0x1fff -#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff -#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff -#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff -#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff -#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff -#define TODC_TYPE_DS1743_CENTURY 0x1ff8 -#define TODC_TYPE_DS1743_FLAGS 0x1fff -#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8 -#define TODC_TYPE_DS1746_SW_FLAGS 0 -#define TODC_TYPE_DS1746_YEAR 0x1ffff -#define TODC_TYPE_DS1746_MONTH 0x1fffe -#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */ -#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */ -#define TODC_TYPE_DS1746_HOURS 0x1fffb -#define TODC_TYPE_DS1746_MINUTES 0x1fffa -#define TODC_TYPE_DS1746_SECONDS 0x1fff9 -#define TODC_TYPE_DS1746_CNTL_B 0x1fff9 -#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1746_WATCHDOG 0x00000 -#define TODC_TYPE_DS1746_INTERRUPTS 0x00000 -#define TODC_TYPE_DS1746_ALARM_DATE 0x00000 -#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000 -#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000 -#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000 -#define TODC_TYPE_DS1746_CENTURY 0x00000 -#define TODC_TYPE_DS1746_FLAGS 0x00000 -#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8 -#define TODC_TYPE_DS1747_SW_FLAGS 0 -#define TODC_TYPE_DS1747_YEAR 0x7ffff -#define TODC_TYPE_DS1747_MONTH 0x7fffe -#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */ -#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */ -#define TODC_TYPE_DS1747_HOURS 0x7fffb -#define TODC_TYPE_DS1747_MINUTES 0x7fffa -#define TODC_TYPE_DS1747_SECONDS 0x7fff9 -#define TODC_TYPE_DS1747_CNTL_B 0x7fff9 -#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1747_WATCHDOG 0x00000 -#define TODC_TYPE_DS1747_INTERRUPTS 0x00000 -#define TODC_TYPE_DS1747_ALARM_DATE 0x00000 -#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000 -#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000 -#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000 -#define TODC_TYPE_DS1747_CENTURY 0x00000 -#define TODC_TYPE_DS1747_FLAGS 0x00000 -#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */ -#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM -#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00) -#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01) -#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02) -#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03) -#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04) -#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05) -#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06) -#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07) -#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08) -#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09) -#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A) -#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B) -#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C) -#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D) -#define TODC_TYPE_DS17285_WATCHDOG 0 -#define TODC_TYPE_DS17285_INTERRUPTS 0 -#define TODC_TYPE_DS17285_ALARM_DATE 0 -#define TODC_TYPE_DS17285_CENTURY 0 -#define TODC_TYPE_DS17285_FLAGS 0 -#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50 -#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53 - -#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */ -#define TODC_TYPE_MC146818_SW_FLAGS 0 -#define TODC_TYPE_MC146818_YEAR 0x09 -#define TODC_TYPE_MC146818_MONTH 0x08 -#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_MC146818_HOURS 0x04 -#define TODC_TYPE_MC146818_MINUTES 0x02 -#define TODC_TYPE_MC146818_SECONDS 0x00 -#define TODC_TYPE_MC146818_CNTL_B 0x0a -#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */ -#define TODC_TYPE_MC146818_WATCHDOG 0 -#define TODC_TYPE_MC146818_INTERRUPTS 0x0c -#define TODC_TYPE_MC146818_ALARM_DATE 0xff -#define TODC_TYPE_MC146818_ALARM_HOUR 0x05 -#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03 -#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01 -#define TODC_TYPE_MC146818_CENTURY 0xff -#define TODC_TYPE_MC146818_FLAGS 0xff -#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0 - -#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */ -#define TODC_TYPE_PC97307_SW_FLAGS 0 -#define TODC_TYPE_PC97307_YEAR 0x09 -#define TODC_TYPE_PC97307_MONTH 0x08 -#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_PC97307_HOURS 0x04 -#define TODC_TYPE_PC97307_MINUTES 0x02 -#define TODC_TYPE_PC97307_SECONDS 0x00 -#define TODC_TYPE_PC97307_CNTL_B 0x0a -#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */ -#define TODC_TYPE_PC97307_WATCHDOG 0x0c -#define TODC_TYPE_PC97307_INTERRUPTS 0x0d -#define TODC_TYPE_PC97307_ALARM_DATE 0xff -#define TODC_TYPE_PC97307_ALARM_HOUR 0x05 -#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03 -#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01 -#define TODC_TYPE_PC97307_CENTURY 0xff -#define TODC_TYPE_PC97307_FLAGS 0xff -#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0 -#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0 - -/* - * Define macros to allocate and init the todc_info_t table that will - * be used by the todc_time.c routines. - */ -#define TODC_ALLOC() \ - static todc_info_t todc_info_alloc; \ - todc_info_t *todc_info = &todc_info_alloc; - -#define TODC_INIT(clock_type, as0, as1, data, bits) { \ - todc_info->rtc_type = clock_type; \ - \ - todc_info->nvram_as0 = (unsigned int)(as0); \ - todc_info->nvram_as1 = (unsigned int)(as1); \ - todc_info->nvram_data = (unsigned int)(data); \ - \ - todc_info->as0_bits = (bits); \ - \ - todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \ - todc_info->sw_flags = clock_type ##_SW_FLAGS; \ - \ - todc_info->year = clock_type ##_YEAR; \ - todc_info->month = clock_type ##_MONTH; \ - todc_info->day_of_month = clock_type ##_DOM; \ - todc_info->day_of_week = clock_type ##_DOW; \ - todc_info->hours = clock_type ##_HOURS; \ - todc_info->minutes = clock_type ##_MINUTES; \ - todc_info->seconds = clock_type ##_SECONDS; \ - todc_info->control_b = clock_type ##_CNTL_B; \ - todc_info->control_a = clock_type ##_CNTL_A; \ - todc_info->watchdog = clock_type ##_WATCHDOG; \ - todc_info->interrupts = clock_type ##_INTERRUPTS; \ - todc_info->alarm_date = clock_type ##_ALARM_DATE; \ - todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \ - todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \ - todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \ - todc_info->century = clock_type ##_CENTURY; \ - todc_info->flags = clock_type ##_FLAGS; \ - \ - todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \ - todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \ -} - -extern todc_info_t *todc_info; - -unsigned char todc_direct_read_val(int addr); -void todc_direct_write_val(int addr, unsigned char val); -unsigned char todc_m48txx_read_val(int addr); -void todc_m48txx_write_val(int addr, unsigned char val); -unsigned char todc_mc146818_read_val(int addr); -void todc_mc146818_write_val(int addr, unsigned char val); - -long todc_time_init(void); -void todc_get_rtc_time(struct rtc_time *); -int todc_set_rtc_time(struct rtc_time *); -void todc_calibrate_decr(void); - -#endif /* __PPC_KERNEL_TODC_H */ -- cgit v1.2.3 From 035223fb28791f0eb0d5719727355d3f6817d228 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 5 Oct 2006 11:35:10 -0700 Subject: [POWERPC] Make pSeries_lpar_hpte_insert static Change the powerpc hpte_insert routines now called through ppc_md to static scope. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- include/asm-powerpc/mmu.h | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index c3fc7a28e3c..41c8c9c5a25 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -248,21 +248,6 @@ extern void hpte_init_native(void); extern void hpte_init_lpar(void); extern void hpte_init_iSeries(void); -extern long pSeries_lpar_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - unsigned long rflags, - unsigned long vflags, int psize); - -extern long native_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - unsigned long rflags, - unsigned long vflags, int psize); - -extern long iSeries_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - unsigned long rflags, - unsigned long vflags, int psize); - extern void stabs_alloc(void); extern void slb_initialize(void); extern void slb_flush_and_rebolt(void); -- cgit v1.2.3 From 24f43b33f74c8e8c8aabc40b728eaf9137802942 Mon Sep 17 00:00:00 2001 From: Masato Noguchi Date: Tue, 24 Oct 2006 18:31:14 +0200 Subject: [POWERPC] spufs: wrap mfc sdr access SPRN_SDR1 and the SPE's MFC SDR are hypervisor resources and are not accessible from a logical partition. This change adds an access wrapper. When running on bare H/W, the spufs needs to only set the SPE's MFC SDR to the value of the PPE's SPRN_SDR1 once at SPE initialization, so this change renames mfc_sdr_set() to mfc_sdr_setup() and moves the access of SPRN_SDR1 into the mmio wrapper. It also removes the now unneeded member mfc_sdr_RW from struct spu_priv1_collapsed. Signed-off-by: Masato Noguchi Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann -- Signed-off-by: Paul Mackerras --- include/asm-powerpc/spu_csa.h | 1 - include/asm-powerpc/spu_priv1.h | 6 +++--- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index 964c2d38ccb..bdbf906a767 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -151,7 +151,6 @@ struct spu_priv1_collapsed { u64 mfc_fir_chkstp_enable_RW; u64 smf_sbi_signal_sel; u64 smf_ato_signal_sel; - u64 mfc_sdr_RW; u64 tlb_index_hint_RO; u64 tlb_index_W; u64 tlb_vpn_RW; diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h index 300c458b6d0..4f9a04db99f 100644 --- a/include/asm-powerpc/spu_priv1.h +++ b/include/asm-powerpc/spu_priv1.h @@ -37,7 +37,7 @@ struct spu_priv1_ops u64 (*mfc_dar_get) (struct spu *spu); u64 (*mfc_dsisr_get) (struct spu *spu); void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr); - void (*mfc_sdr_set) (struct spu *spu, u64 sdr); + void (*mfc_sdr_setup) (struct spu *spu); void (*mfc_sr1_set) (struct spu *spu, u64 sr1); u64 (*mfc_sr1_get) (struct spu *spu); void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id); @@ -112,9 +112,9 @@ spu_mfc_dsisr_set (struct spu *spu, u64 dsisr) } static inline void -spu_mfc_sdr_set (struct spu *spu, u64 sdr) +spu_mfc_sdr_setup (struct spu *spu) { - spu_priv1_ops->mfc_sdr_set(spu, sdr); + spu_priv1_ops->mfc_sdr_setup(spu); } static inline void -- cgit v1.2.3 From cc21a66d7f727ab97b27af9cf763bc0b51510ffa Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 24 Oct 2006 18:31:15 +0200 Subject: [POWERPC] cell: remove unused struct spu variable Remove the mostly unused variable isrc from struct spu and a forgotten function declaration. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/spu.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index e73ea00efd8..cac4ad90a1d 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -118,7 +118,6 @@ struct spu { int number; int nid; unsigned int irqs[3]; - u32 isrc; u32 node; u64 flags; u64 dar; -- cgit v1.2.3 From 5737edd1ddbde5ab7f63bb3cb36015edbdb7c295 Mon Sep 17 00:00:00 2001 From: Mark Nutter Date: Tue, 24 Oct 2006 18:31:16 +0200 Subject: [POWERPC] spufs: add support for nonschedulable contexts This adds two new flags to spu_create: SPU_CREATE_NONSCHED: create a context that is never moved away from an SPE once it has started running. This flag can only be used by tasks with the CAP_SYS_NICE capability. SPU_CREATE_ISOLATED: create a nonschedulable context that enters isolation mode upon first run. This requires the SPU_CREATE_NONSCHED flag. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/spu.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index cac4ad90a1d..a1cf476c66f 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -181,8 +181,10 @@ extern struct spufs_calls { */ #define SPU_CREATE_EVENTS_ENABLED 0x0001 #define SPU_CREATE_GANG 0x0002 +#define SPU_CREATE_NOSCHED 0x0004 +#define SPU_CREATE_ISOLATE 0x0008 -#define SPU_CREATE_FLAG_ALL 0x0003 /* mask of all valid flags */ +#define SPU_CREATE_FLAG_ALL 0x000f /* mask of all valid flags */ #ifdef CONFIG_SPU_FS_MODULE @@ -276,6 +278,7 @@ struct spu_problem { u32 spu_runcntl_RW; /* 0x401c */ #define SPU_RUNCNTL_STOP 0L #define SPU_RUNCNTL_RUNNABLE 1L +#define SPU_RUNCNTL_ISOLATE 2L u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */ u32 spu_status_R; /* 0x4024 */ #define SPU_STOP_STATUS_SHIFT 16 -- cgit v1.2.3 From eb758ce5b0d84e13cb643b6cc7cb429f6fa28258 Mon Sep 17 00:00:00 2001 From: "arnd@arndb.de" Date: Tue, 24 Oct 2006 18:31:17 +0200 Subject: [POWERPC] spufs: "stautus" isnt a word. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/spu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index a1cf476c66f..704e8a8d2eb 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -291,8 +291,8 @@ struct spu_problem { #define SPU_STATUS_INVALID_INSTR 0x20 #define SPU_STATUS_INVALID_CH 0x40 #define SPU_STATUS_ISOLATED_STATE 0x80 -#define SPU_STATUS_ISOLATED_LOAD_STAUTUS 0x200 -#define SPU_STATUS_ISOLATED_EXIT_STAUTUS 0x400 +#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200 +#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400 u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */ u32 spu_spe_R; /* 0x402c */ u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */ -- cgit v1.2.3 From e570beb6bb1a623849901efbf939063ec4775c9e Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Tue, 24 Oct 2006 18:31:23 +0200 Subject: [POWERPC] cell: add support for registering sysfs attributes to spus In order to add sysfs attributes to all spu's, there is a need for a list of all available spu's. Adding the device_node makes also sense, as it is needed for proper register access. This patch also adds two functions to create and remove sysfs attributes and attribute_groups to all spus. That allows to group spu attributes in a subdirectory like: /sys/devices/system/spu/spuX/group_name/what_ever This will be used by cbe_thermal to group all attributes dealing with thermal support in one directory. Signed-off-by: Christian Krafft Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/spu.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 704e8a8d2eb..ffa4df08360 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -115,6 +115,7 @@ struct spu { struct spu_priv2 __iomem *priv2; struct list_head list; struct list_head sched_list; + struct list_head full_list; int number; int nid; unsigned int irqs[3]; @@ -143,6 +144,8 @@ struct spu { char irq_c1[8]; char irq_c2[8]; + struct device_node *devnode; + struct sys_device sysdev; }; @@ -200,6 +203,12 @@ static inline void unregister_spu_syscalls(struct spufs_calls *calls) } #endif /* MODULE */ +int spu_add_sysdev_attr(struct sysdev_attribute *attr); +void spu_remove_sysdev_attr(struct sysdev_attribute *attr); + +int spu_add_sysdev_attr_group(struct attribute_group *attrs); +void spu_remove_sysdev_attr_group(struct attribute_group *attrs); + /* * Notifier blocks: -- cgit v1.2.3 From 0344c6c5387ba335bba5a66fd44714b94c98573f Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Tue, 24 Oct 2006 18:31:24 +0200 Subject: [POWERPC] sysfs: add support for adding/removing spu sysfs attributes This patch adds two functions to create and remove sysfs attributes and attribute_group to all cpus. That allows to register sysfs attributes in a subdirectory like: /sys/devices/system/cpu/cpuX/group_name/what_ever This will be used by cbe_thermal to group all attributes dealing with thermal support in one directory. Signed-of-by: Christian Krafft Signed-off-by: Paul Mackerras --- include/linux/cpu.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 3fef7d67aed..f02d71bf689 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -33,6 +33,14 @@ struct cpu { extern int register_cpu(struct cpu *cpu, int num); extern struct sys_device *get_cpu_sysdev(unsigned cpu); + +extern int cpu_add_sysdev_attr(struct sysdev_attribute *attr); +extern void cpu_remove_sysdev_attr(struct sysdev_attribute *attr); + +extern int cpu_add_sysdev_attr_group(struct attribute_group *attrs); +extern void cpu_remove_sysdev_attr_group(struct attribute_group *attrs); + + #ifdef CONFIG_HOTPLUG_CPU extern void unregister_cpu(struct cpu *cpu); #endif -- cgit v1.2.3 From ff8a8f25976aa58bbae7883405b00dcbaf4cc823 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Oct 2006 18:31:27 +0200 Subject: [POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/xmon.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index f1d337ed68d..88320a05f0a 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -14,8 +14,10 @@ #ifdef CONFIG_XMON extern void xmon_setup(void); +extern void xmon_register_spus(struct list_head *list); #else static inline void xmon_setup(void) { }; +static inline void xmon_register_spus(struct list_head *list) { }; #endif #endif /* __KERNEL __ */ -- cgit v1.2.3 From 2b890bc2ce95e8c141b38ea86100826b46534295 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 6 Nov 2006 11:19:08 +0100 Subject: [PATCH] Remove dead code in iommu.h iommu_setup_pSeries() and iommu_setup_dart() are declared extern but are not implemented, so remove them. Remove ifdef around extern function declaration. Signed-off-by: Sascha Hauer Signed-off-by: Paul Mackerras --- include/asm-powerpc/iommu.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index a5e98641a2a..264ed624277 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -52,17 +52,9 @@ struct iommu_table { struct scatterlist; struct device_node; -#ifdef CONFIG_PPC_MULTIPLATFORM - -/* Walks all buses and creates iommu tables */ -extern void iommu_setup_pSeries(void); -extern void iommu_setup_dart(void); - /* Frees table for an individual device node */ extern void iommu_free_table(struct device_node *dn); -#endif /* CONFIG_PPC_MULTIPLATFORM */ - /* Initializes an iommu_table based in values set in the passed-in * structure */ -- cgit v1.2.3 From 67764a03193d0246cf9bb491b41806508d415830 Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Thu, 2 Nov 2006 13:56:00 +0100 Subject: [PATCH] Remove unnecessary ifdef in include/asm-powerpc/pci.h Current kernels always have one of CONFIG_PPC_MULTIPLATFORM or CONFIG_PPC32 defined, so remove bogus ifdef. Signed-off-by: Sascha Hauer Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h index 46afd29b904..051694f14c3 100644 --- a/include/asm-powerpc/pci.h +++ b/include/asm-powerpc/pci.h @@ -238,12 +238,10 @@ extern pgprot_t pci_phys_mem_access_prot(struct file *file, unsigned long size, pgprot_t prot); -#if defined(CONFIG_PPC_MULTIPLATFORM) || defined(CONFIG_PPC32) #define HAVE_ARCH_PCI_RESOURCE_TO_USER extern void pci_resource_to_user(const struct pci_dev *dev, int bar, const struct resource *rsrc, resource_size_t *start, resource_size_t *end); -#endif /* CONFIG_PPC_MULTIPLATFORM || CONFIG_PPC32 */ #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_PCI_H */ -- cgit v1.2.3 From 68e1300a55310a288b87f2a7d6045df0d0f802bc Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Thu, 2 Nov 2006 13:56:01 +0100 Subject: [PATCH] Remove _machine macro The _machine macro was once used for compatibility with ARCH=ppc drivers. It is unused in current kernels, so remove it. Signed-off-by: Sascha Hauer Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/processor.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index 6cb6fb19e57..a26c32ee552 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -53,10 +53,6 @@ extern unsigned char ucBoardRevMaj, ucBoardRevMin; #endif /* CONFIG_PPC_PREP */ -#ifndef CONFIG_PPC_MULTIPLATFORM -#define _machine 0 -#endif /* CONFIG_PPC_MULTIPLATFORM */ - #endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */ /* -- cgit v1.2.3 From 0f6c95dcabdaa8fdc95b125582bd12625adfbde6 Mon Sep 17 00:00:00 2001 From: Nicolas DET Date: Wed, 8 Nov 2006 17:14:43 +0100 Subject: [PATCH] Add MPC5200 Interrupt Controller support. This adds support for the MPC52xx Interrupt controller for ARCH=powerpc. It includes the main code in arch/powerpc/sysdev/ as well as a header file in include/asm-powerpc. Signed-off-by: Nicolas DET Acked-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc52xx.h | 287 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 287 insertions(+) create mode 100644 include/asm-powerpc/mpc52xx.h (limited to 'include') diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h new file mode 100644 index 00000000000..e9aa622f19f --- /dev/null +++ b/include/asm-powerpc/mpc52xx.h @@ -0,0 +1,287 @@ +/* + * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_POWERPC_MPC52xx_H__ +#define __ASM_POWERPC_MPC52xx_H__ + +#ifndef __ASSEMBLY__ +#include +#include +#endif /* __ASSEMBLY__ */ + + +/* ======================================================================== */ +/* HW IRQ mapping */ +/* ======================================================================== */ + +#define MPC52xx_IRQ_L1_CRIT (0) +#define MPC52xx_IRQ_L1_MAIN (1) +#define MPC52xx_IRQ_L1_PERP (2) +#define MPC52xx_IRQ_L1_SDMA (3) + +#define MPC52xx_IRQ_L1_OFFSET (6) +#define MPC52xx_IRQ_L1_MASK (0xc0) + +#define MPC52xx_IRQ_L2_OFFSET (0) +#define MPC52xx_IRQ_L2_MASK (0x3f) + +#define MPC52xx_IRQ_HIGHTESTHWIRQ (0xd0) + + +/* ======================================================================== */ +/* Structures mapping of some unit register set */ +/* ======================================================================== */ + +#ifndef __ASSEMBLY__ + +/* Interrupt controller Register set */ +struct mpc52xx_intr { + u32 per_mask; /* INTR + 0x00 */ + u32 per_pri1; /* INTR + 0x04 */ + u32 per_pri2; /* INTR + 0x08 */ + u32 per_pri3; /* INTR + 0x0c */ + u32 ctrl; /* INTR + 0x10 */ + u32 main_mask; /* INTR + 0x14 */ + u32 main_pri1; /* INTR + 0x18 */ + u32 main_pri2; /* INTR + 0x1c */ + u32 reserved1; /* INTR + 0x20 */ + u32 enc_status; /* INTR + 0x24 */ + u32 crit_status; /* INTR + 0x28 */ + u32 main_status; /* INTR + 0x2c */ + u32 per_status; /* INTR + 0x30 */ + u32 reserved2; /* INTR + 0x34 */ + u32 per_error; /* INTR + 0x38 */ +}; + +/* Memory Mapping Control */ +struct mpc52xx_mmap_ctl { + u32 mbar; /* MMAP_CTRL + 0x00 */ + + u32 cs0_start; /* MMAP_CTRL + 0x04 */ + u32 cs0_stop; /* MMAP_CTRL + 0x08 */ + u32 cs1_start; /* MMAP_CTRL + 0x0c */ + u32 cs1_stop; /* MMAP_CTRL + 0x10 */ + u32 cs2_start; /* MMAP_CTRL + 0x14 */ + u32 cs2_stop; /* MMAP_CTRL + 0x18 */ + u32 cs3_start; /* MMAP_CTRL + 0x1c */ + u32 cs3_stop; /* MMAP_CTRL + 0x20 */ + u32 cs4_start; /* MMAP_CTRL + 0x24 */ + u32 cs4_stop; /* MMAP_CTRL + 0x28 */ + u32 cs5_start; /* MMAP_CTRL + 0x2c */ + u32 cs5_stop; /* MMAP_CTRL + 0x30 */ + + u32 sdram0; /* MMAP_CTRL + 0x34 */ + u32 sdram1; /* MMAP_CTRL + 0X38 */ + + u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ + + u32 boot_start; /* MMAP_CTRL + 0x4c */ + u32 boot_stop; /* MMAP_CTRL + 0x50 */ + + u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ + + u32 cs6_start; /* MMAP_CTRL + 0x58 */ + u32 cs6_stop; /* MMAP_CTRL + 0x5c */ + u32 cs7_start; /* MMAP_CTRL + 0x60 */ + u32 cs7_stop; /* MMAP_CTRL + 0x64 */ +}; + +/* SDRAM control */ +struct mpc52xx_sdram { + u32 mode; /* SDRAM + 0x00 */ + u32 ctrl; /* SDRAM + 0x04 */ + u32 config1; /* SDRAM + 0x08 */ + u32 config2; /* SDRAM + 0x0c */ +}; + +/* SDMA */ +struct mpc52xx_sdma { + u32 taskBar; /* SDMA + 0x00 */ + u32 currentPointer; /* SDMA + 0x04 */ + u32 endPointer; /* SDMA + 0x08 */ + u32 variablePointer; /* SDMA + 0x0c */ + + u8 IntVect1; /* SDMA + 0x10 */ + u8 IntVect2; /* SDMA + 0x11 */ + u16 PtdCntrl; /* SDMA + 0x12 */ + + u32 IntPend; /* SDMA + 0x14 */ + u32 IntMask; /* SDMA + 0x18 */ + + u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ + + u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ + + u32 cReqSelect; /* SDMA + 0x5c */ + u32 task_size0; /* SDMA + 0x60 */ + u32 task_size1; /* SDMA + 0x64 */ + u32 MDEDebug; /* SDMA + 0x68 */ + u32 ADSDebug; /* SDMA + 0x6c */ + u32 Value1; /* SDMA + 0x70 */ + u32 Value2; /* SDMA + 0x74 */ + u32 Control; /* SDMA + 0x78 */ + u32 Status; /* SDMA + 0x7c */ + u32 PTDDebug; /* SDMA + 0x80 */ +}; + +/* GPT */ +struct mpc52xx_gpt { + u32 mode; /* GPTx + 0x00 */ + u32 count; /* GPTx + 0x04 */ + u32 pwm; /* GPTx + 0x08 */ + u32 status; /* GPTx + 0X0c */ +}; + +/* GPIO */ +struct mpc52xx_gpio { + u32 port_config; /* GPIO + 0x00 */ + u32 simple_gpioe; /* GPIO + 0x04 */ + u32 simple_ode; /* GPIO + 0x08 */ + u32 simple_ddr; /* GPIO + 0x0c */ + u32 simple_dvo; /* GPIO + 0x10 */ + u32 simple_ival; /* GPIO + 0x14 */ + u8 outo_gpioe; /* GPIO + 0x18 */ + u8 reserved1[3]; /* GPIO + 0x19 */ + u8 outo_dvo; /* GPIO + 0x1c */ + u8 reserved2[3]; /* GPIO + 0x1d */ + u8 sint_gpioe; /* GPIO + 0x20 */ + u8 reserved3[3]; /* GPIO + 0x21 */ + u8 sint_ode; /* GPIO + 0x24 */ + u8 reserved4[3]; /* GPIO + 0x25 */ + u8 sint_ddr; /* GPIO + 0x28 */ + u8 reserved5[3]; /* GPIO + 0x29 */ + u8 sint_dvo; /* GPIO + 0x2c */ + u8 reserved6[3]; /* GPIO + 0x2d */ + u8 sint_inten; /* GPIO + 0x30 */ + u8 reserved7[3]; /* GPIO + 0x31 */ + u16 sint_itype; /* GPIO + 0x34 */ + u16 reserved8; /* GPIO + 0x36 */ + u8 gpio_control; /* GPIO + 0x38 */ + u8 reserved9[3]; /* GPIO + 0x39 */ + u8 sint_istat; /* GPIO + 0x3c */ + u8 sint_ival; /* GPIO + 0x3d */ + u8 bus_errs; /* GPIO + 0x3e */ + u8 reserved10; /* GPIO + 0x3f */ +}; + +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 +#define MPC52xx_GPIO_PCI_DIS (1<<15) + +/* GPIO with WakeUp*/ +struct mpc52xx_gpio_wkup { + u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ + u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ + u8 wkup_ode; /* GPIO_WKUP + 0x04 */ + u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ + u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ + u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ + u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ + u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ + u8 wkup_inten; /* GPIO_WKUP + 0x10 */ + u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ + u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ + u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ + u16 wkup_itype; /* GPIO_WKUP + 0x18 */ + u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ + u8 wkup_maste; /* GPIO_WKUP + 0x1C */ + u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ + u8 wkup_ival; /* GPIO_WKUP + 0x20 */ + u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ + u8 wkup_istat; /* GPIO_WKUP + 0x24 */ + u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ +}; + +/* XLB Bus control */ +struct mpc52xx_xlb { + u8 reserved[0x40]; + u32 config; /* XLB + 0x40 */ + u32 version; /* XLB + 0x44 */ + u32 status; /* XLB + 0x48 */ + u32 int_enable; /* XLB + 0x4c */ + u32 addr_capture; /* XLB + 0x50 */ + u32 bus_sig_capture; /* XLB + 0x54 */ + u32 addr_timeout; /* XLB + 0x58 */ + u32 data_timeout; /* XLB + 0x5c */ + u32 bus_act_timeout; /* XLB + 0x60 */ + u32 master_pri_enable; /* XLB + 0x64 */ + u32 master_priority; /* XLB + 0x68 */ + u32 base_address; /* XLB + 0x6c */ + u32 snoop_window; /* XLB + 0x70 */ +}; + +#define MPC52xx_XLB_CFG_PLDIS (1 << 31) +#define MPC52xx_XLB_CFG_SNOOP (1 << 15) + +/* Clock Distribution control */ +struct mpc52xx_cdm { + u32 jtag_id; /* CDM + 0x00 reg0 read only */ + u32 rstcfg; /* CDM + 0x04 reg1 read only */ + u32 breadcrumb; /* CDM + 0x08 reg2 */ + + u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ + u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ + u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ + u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ + + u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ + u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ + u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ + + u32 clk_enables; /* CDM + 0x14 reg5 */ + + u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ + u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ + + u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ + u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ + u8 reserved1; /* CDM + 0x1e reg7 byte2 */ + u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ + + u8 soft_reset; /* CDM + 0x20 u8 byte0 */ + u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ + u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ + + u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ + u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ + u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ + u8 reserved3; /* CDM + 0x27 reg9 byte3 */ + + u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ + u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ + + u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ + u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ + + u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ + u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ + + u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ + u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ +}; + +#endif /* __ASSEMBLY__ */ + + +/* ========================================================================= */ +/* Prototypes for MPC52xx sysdev */ +/* ========================================================================= */ + +#ifndef __ASSEMBLY__ + +extern void mpc52xx_init_irq(void); +extern unsigned int mpc52xx_get_irq(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_POWERPC_MPC52xx_H__ */ + -- cgit v1.2.3 From a9b14973a8c42b2aecc968851372203c6567e196 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 19 Oct 2006 19:52:26 -0500 Subject: [PATCH] Slight refactor of interrupt mapping for FSL parts * Cleaned up interrupt mapping a little by adding a helper function which parses the irq out of the device-tree, and puts it into a resource. * Changed the arch/ppc platform files to specify PHY_POLL, instead of -1 * Changed the fixed phy to use PHY_IGNORE_INTERRUPT * Added ethtool.h and mii.h to phy.h includes Signed-off-by: Paul Mackerras --- include/asm-powerpc/prom.h | 7 +++++++ include/linux/phy.h | 3 +++ 2 files changed, 10 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 52462976933..39f04ef96f3 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -17,6 +17,7 @@ */ #include #include +#include #include /* Definitions used by the flattened device tree */ @@ -331,6 +332,12 @@ extern int of_irq_map_one(struct device_node *device, int index, struct pci_dev; extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); +static inline void of_irq_to_resource(struct device_node *dev, int index, struct resource *r) +{ + r->start = r->end = irq_of_parse_and_map(dev, index); + r->flags = IORESOURCE_IRQ; +} + #endif /* __KERNEL__ */ #endif /* _POWERPC_PROM_H */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 9447a57ee8a..892d6abe57e 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -20,6 +20,9 @@ #include #include +#include +#include +#include #define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ SUPPORTED_10baseT_Full | \ -- cgit v1.2.3 From 66a91e9c0ab62ea938afaba7352741d8c554a589 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 7 Nov 2006 16:57:22 -0600 Subject: [PATCH] of_irq_to_resource now returns the virq Mostly this is to allow for error checking (check the return for NO_IRQ) Added a check that the resource is non-NULL, too. Signed-off-by: Andrew Fleming Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/prom.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 39f04ef96f3..1fd7a2253e3 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -332,10 +332,18 @@ extern int of_irq_map_one(struct device_node *device, int index, struct pci_dev; extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); -static inline void of_irq_to_resource(struct device_node *dev, int index, struct resource *r) +static inline int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) { - r->start = r->end = irq_of_parse_and_map(dev, index); - r->flags = IORESOURCE_IRQ; + int irq = irq_of_parse_and_map(dev, index); + + /* Only dereference the resource if both the + * resource and the irq are valid. */ + if (r && irq != NO_IRQ) { + r->start = r->end = irq; + r->flags = IORESOURCE_IRQ; + } + + return irq; } -- cgit v1.2.3 From fc9e8b4e275b6882cb537154c8fc7cde3692eea0 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 9 Nov 2006 15:42:44 -0600 Subject: [PATCH] Optimize qe_brg struct to use an array The qe_brg structure manually defined each of the 16 BRG registers, which made any code that used them cumbersome. This patch replaces the fields with a single 16-element array. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- include/asm-powerpc/immap_qe.h | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h index ce12f85fff9..9fdd0491f6a 100644 --- a/include/asm-powerpc/immap_qe.h +++ b/include/asm-powerpc/immap_qe.h @@ -136,22 +136,7 @@ struct qe_timers { /* BRG */ struct qe_brg { - __be32 brgc1; /* BRG1 configuration register */ - __be32 brgc2; /* BRG2 configuration register */ - __be32 brgc3; /* BRG3 configuration register */ - __be32 brgc4; /* BRG4 configuration register */ - __be32 brgc5; /* BRG5 configuration register */ - __be32 brgc6; /* BRG6 configuration register */ - __be32 brgc7; /* BRG7 configuration register */ - __be32 brgc8; /* BRG8 configuration register */ - __be32 brgc9; /* BRG9 configuration register */ - __be32 brgc10; /* BRG10 configuration register */ - __be32 brgc11; /* BRG11 configuration register */ - __be32 brgc12; /* BRG12 configuration register */ - __be32 brgc13; /* BRG13 configuration register */ - __be32 brgc14; /* BRG14 configuration register */ - __be32 brgc15; /* BRG15 configuration register */ - __be32 brgc16; /* BRG16 configuration register */ + __be32 brgc[16]; /* BRG configuration registers */ u8 res0[0x40]; } __attribute__ ((packed)); -- cgit v1.2.3 From 19a79859e168640f8e16d7b216d211c1c52b687a Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Sat, 11 Nov 2006 10:53:19 +0100 Subject: [PATCH] ppc: Fix io.h for config with CONFIG_PCI not set When CONFIG_PCI option is not set, the variables pci_dram_offset, isa_io_base and isa_mem_base are not defined. Currently, the test is handled in each platform header. This patch moves the test in io.h once and for all. Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc85xx.h | 8 -------- include/asm-ppc/io.h | 8 +------- include/asm-ppc/mpc52xx.h | 11 ----------- include/asm-ppc/mpc83xx.h | 8 -------- include/asm-ppc/mpc85xx.h | 8 -------- 5 files changed, 1 insertion(+), 42 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/mpc85xx.h b/include/asm-powerpc/mpc85xx.h index ccdb8a21138..54142997a58 100644 --- a/include/asm-powerpc/mpc85xx.h +++ b/include/asm-powerpc/mpc85xx.h @@ -31,14 +31,6 @@ #include #endif -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#ifdef CONFIG_PCI -#define PCI_DRAM_OFFSET pci_dram_offset -#else -#define PCI_DRAM_OFFSET 0 -#endif - /* Let modules/drivers get at CCSRBAR */ extern phys_addr_t get_ccsrbar(void); diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index a4c411b753e..b744baf9e20 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -26,17 +26,11 @@ #if defined(CONFIG_4xx) #include -#elif defined(CONFIG_PPC_MPC52xx) -#include #elif defined(CONFIG_8xx) #include #elif defined(CONFIG_8260) #include -#elif defined(CONFIG_83xx) -#include -#elif defined(CONFIG_85xx) -#include -#elif defined(CONFIG_APUS) +#elif defined(CONFIG_APUS) || !defined(CONFIG_PCI) #define _IO_BASE 0 #define _ISA_MEM_BASE 0 #define PCI_DRAM_OFFSET 0 diff --git a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h index 64c8874618d..d9d21aa68ba 100644 --- a/include/asm-ppc/mpc52xx.h +++ b/include/asm-ppc/mpc52xx.h @@ -29,17 +29,6 @@ struct pt_regs; #endif /* __ASSEMBLY__ */ -#ifdef CONFIG_PCI -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET pci_dram_offset -#else -#define _IO_BASE 0 -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 -#endif - - /* ======================================================================== */ /* PPC Sys devices definition */ /* ======================================================================== */ diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h index 02ed2c32571..c3061972309 100644 --- a/include/asm-ppc/mpc83xx.h +++ b/include/asm-ppc/mpc83xx.h @@ -25,14 +25,6 @@ #include #endif -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#ifdef CONFIG_PCI -#define PCI_DRAM_OFFSET pci_dram_offset -#else -#define PCI_DRAM_OFFSET 0 -#endif - /* * The "residual" board information structure the boot loader passes * into the kernel. diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h index 9b4851199c7..d7e4a79d77f 100644 --- a/include/asm-ppc/mpc85xx.h +++ b/include/asm-ppc/mpc85xx.h @@ -44,14 +44,6 @@ #include #endif -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#ifdef CONFIG_PCI -#define PCI_DRAM_OFFSET pci_dram_offset -#else -#define PCI_DRAM_OFFSET 0 -#endif - /* * The "residual" board information structure the boot loader passes * into the kernel. -- cgit v1.2.3 From fc085150b491bfc186efbca90a14cf907a3060a9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 10 Oct 2006 14:28:11 -0700 Subject: [PATCH] libata: add 40pin "short" cable support, honour drive side speed detection [deweerdt@free.fr: build fix] Signed-off-by: Alan Cox Signed-off-by: Frederik Deweerdt Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/ata.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/ata.h b/include/linux/ata.h index d8944190702..1df941648a5 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -200,8 +200,9 @@ enum { ATA_CBL_NONE = 0, ATA_CBL_PATA40 = 1, ATA_CBL_PATA80 = 2, - ATA_CBL_PATA_UNK = 3, - ATA_CBL_SATA = 4, + ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */ + ATA_CBL_PATA_UNK = 4, + ATA_CBL_SATA = 5, /* SATA Status and Control Registers */ SCR_STATUS = 0, @@ -342,6 +343,15 @@ static inline int ata_id_is_cfa(const u16 *id) return 0; } +static inline int ata_drive_40wire(const u16 *dev_id) +{ + if (ata_id_major_version(dev_id) >= 5 && ata_id_is_sata(dev_id)) + return 0; /* SATA */ + if (dev_id[93] & 0x4000) + return 0; /* 80 wire */ + return 1; +} + static inline int atapi_cdb_len(const u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; -- cgit v1.2.3 From 6919a0a6cfdad9e83d02cef5973826acd416560c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 27 Oct 2006 19:08:46 -0700 Subject: [PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox Cc: Jeff Garzik Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/libata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index abd2debebca..2300fcc37f8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -307,6 +307,8 @@ enum { (some horkage may be drive/controller pair dependant */ ATA_HORKAGE_DIAGNOSTIC = (1 << 0), /* Failed boot diag */ + ATA_HORKAGE_NODMA = (1 << 1), /* DMA problems */ + ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */ }; enum hsm_task_states { @@ -787,6 +789,7 @@ extern void ata_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); +extern unsigned long ata_device_blacklisted(const struct ata_device *dev); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); -- cgit v1.2.3 From a20c9e820864e18b59d2a4f2f04e8b6053986c95 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 27 Oct 2006 19:08:48 -0700 Subject: [PATCH] ata: Generic platform_device libata driver needs a changelog Signed-off-by: Paul Mundt Acked-by: Russell King Cc: Jeff Garzik Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/pata_platform.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 include/linux/pata_platform.h (limited to 'include') diff --git a/include/linux/pata_platform.h b/include/linux/pata_platform.h new file mode 100644 index 00000000000..2d5fd647e0e --- /dev/null +++ b/include/linux/pata_platform.h @@ -0,0 +1,13 @@ +#ifndef __LINUX_PATA_PLATFORM_H +#define __LINUX_PATA_PLATFORM_H + +struct pata_platform_info { + /* + * I/O port shift, for platforms with ports that are + * constantly spaced and need larger than the 1-byte + * spacing used by ata_std_ports(). + */ + unsigned int ioport_shift; +}; + +#endif /* __LINUX_PATA_PLATFORM_H */ -- cgit v1.2.3 From d1adc1bbd6dde3e05a91e2d3e6ab42d202ea61d5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 9 Oct 2006 18:32:15 +0900 Subject: [PATCH] libata: handle 0xff status properly libata waits for !BSY even when the status register reports 0xff. This causes long boot delays when D8 isn't pulled down properly. This patch does the followings. * don't wait if status register is 0xff in all wait functions * make ata_busy_sleep() return 0 on success and -errno on failure. -ENODEV is returned on 0xff status and -EBUSY on other failures. * make ata_bus_softreset() succeed on 0xff status. 0xff status is not reset failure. It indicates no device. This removes unnecessary retries on such ports. Note that the code change assumes unoccupied port reporting 0xff status does not produce valid device signature. Signed-off-by: Tejun Heo Cc: Joe Jin Signed-off-by: Jeff Garzik --- include/linux/libata.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 2300fcc37f8..6c003d852a8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -746,9 +746,8 @@ extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg); extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); extern void ata_host_resume(struct ata_host *host); extern int ata_ratelimit(void); -extern unsigned int ata_busy_sleep(struct ata_port *ap, - unsigned long timeout_pat, - unsigned long timeout); +extern int ata_busy_sleep(struct ata_port *ap, + unsigned long timeout_pat, unsigned long timeout); extern void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, unsigned long delay); extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, @@ -1064,7 +1063,7 @@ static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits, udelay(10); status = ata_chk_status(ap); max--; - } while ((status & bits) && (max > 0)); + } while (status != 0xff && (status & bits) && (max > 0)); return status; } @@ -1085,7 +1084,7 @@ static inline u8 ata_wait_idle(struct ata_port *ap) { u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - if (status & (ATA_BUSY | ATA_DRQ)) { + if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ))) { unsigned long l = ap->ioaddr.status_addr; if (ata_msg_warn(ap)) printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n", -- cgit v1.2.3 From 90088bb41200b4da962282dfd45db82544adac3b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 9 Oct 2006 11:10:26 +0900 Subject: [PATCH] libata: move ata_irq_on() into libata-sff.c ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 31 ------------------------------- 1 file changed, 31 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6c003d852a8..d3bf7b936c3 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1149,37 +1149,6 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->result_tf.feature = 0; } -/** - * ata_irq_on - Enable interrupts on a port. - * @ap: Port on which interrupts are enabled. - * - * Enable interrupts on a legacy IDE device using MMIO or PIO, - * wait for idle, clear any pending interrupts. - * - * LOCKING: - * Inherited from caller. - */ - -static inline u8 ata_irq_on(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 tmp; - - ap->ctl &= ~ATA_NIEN; - ap->last_ctl = ap->ctl; - - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); - tmp = ata_wait_idle(ap); - - ap->ops->irq_clear(ap); - - return tmp; -} - - /** * ata_irq_ack - Acknowledge a device interrupt. * @ap: Port on which interrupts are enabled. -- cgit v1.2.3 From b6103f6d1659e2024776bc759d28613fb36344a8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Nov 2006 17:59:53 +0900 Subject: [PATCH] libata: separate out and export sata_port_hardreset() Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index d3bf7b936c3..41fa0890dbf 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -702,6 +702,8 @@ extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param); extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param); extern int ata_std_prereset(struct ata_port *ap); extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); +extern int sata_port_hardreset(struct ata_port *ap, + const unsigned long *timing); extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); extern void ata_port_disable(struct ata_port *); -- cgit v1.2.3 From efdaedc443e935eda82e9e78a6e65d1f993d242f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Nov 2006 18:38:52 +0900 Subject: [PATCH] libata: implement ATA_EHI_PRINTINFO Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 41fa0890dbf..949484627e6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -283,6 +283,7 @@ enum { ATA_EHI_QUIET = (1 << 3), /* be quiet */ ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ + ATA_EHI_PRINTINFO = (1 << 17), /* print configuration info */ ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK, -- cgit v1.2.3 From baa1e78a834c917984a4659fd282f712c17ee3bf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 1 Nov 2006 18:39:27 +0900 Subject: [PATCH] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODE libata EH used to perform ata_set_mode() iff the EH session performed reset as indicated by ATA_EHI_DID_RESET. This is incorrect because ->dev_config() called by revalidation is allowed to modify transfer mode which ata_set_mode() should take care of. This patch implements the following two flags. * ATA_EHI_SETMODE: set during EH to schedule ata_set_mode(). Both new device attachment and revalidation set this flag. * ATA_EHI_POST_SETMODE: set while the device is revalidated after ata_set_mode(). Post-setmode revalidation is different from initial configuaration and EH revalidation in that ->dev_config() is not allowed tune transfer mode. LLD can use this flag to determine whether it's allowed to tune transfer mode. Note that POST_SETMODE ->dev_config() is guaranteed to be preceded by non-POST_SETMODE ->dev_config(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 949484627e6..0d0ddeaee73 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -284,6 +284,8 @@ enum { ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ ATA_EHI_PRINTINFO = (1 << 17), /* print configuration info */ + ATA_EHI_SETMODE = (1 << 18), /* configure transfer mode */ + ATA_EHI_POST_SETMODE = (1 << 19), /* revaildating after setmode */ ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK, -- cgit v1.2.3 From 0df0d0a0ea9ffcee4e56f96cd9d9e32b0644eb21 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Tue, 14 Nov 2006 13:43:21 -0500 Subject: [libata] ARM: add ixp4xx PATA driver Signed-off-by: Alessandro Zummo Signed-off-by: Jeff Garzik --- include/asm-arm/arch-ixp4xx/platform.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include') diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index 8d10a918769..ab194e5f665 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -86,6 +86,19 @@ struct ixp4xx_i2c_pins { unsigned long scl_pin; }; +/* + * This structure provide a means for the board setup code + * to give information to th pata_ixp4xx driver. It is + * passed as platform_data. + */ +struct ixp4xx_pata_data { + volatile u32 *cs0_cfg; + volatile u32 *cs1_cfg; + unsigned long cs0_bits; + unsigned long cs1_bits; + void __iomem *cs0; + void __iomem *cs1; +}; struct sys_timer; -- cgit v1.2.3 From 6fc49adb9417b9c793e8f88d485387bb89ceb733 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Nov 2006 20:10:45 +0900 Subject: [PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limit Many drives support LBA48 even when its capacity is smaller than 1<<28, as LBA48 is required for many functionalities. FLUSH_EXT is mandatory for drives w/ LBA48 support. Interestingly, at least one of such drives (ST960812A) has problems dealing with FLUSH_EXT. It eventually completes the command but takes around 7 seconds to finish in many cases thus drastically slowing down IO transactions. This seems to be a firmware bug which sneaked into production probably because no other ATA driver including linux IDE issues FLUSH_EXT to drives which report support for LBA48 & FLUSH_EXT but is smaller than 1<<28 blocks. This patch adds ATA_DFLAG_FLUSH_EXT which is set iff the drive supports LBA48 & FLUSH_EXT and is larger than LBA28 limit. Both cache flush paths are updated to issue FLUSH_EXT only when the flag is set. Note that the changed behavior is more inline with the rest of libata. libata prefers shorter commands whenever possible. Signed-off-by: Tejun Heo Cc: Danny Kukawka Cc: Stefan Seyfried Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 0d0ddeaee73..36e233cc388 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -140,6 +140,7 @@ enum { ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */ ATA_DFLAG_CDB_INTR = (1 << 2), /* device asserts INTRQ when ready for CDB */ ATA_DFLAG_NCQ = (1 << 3), /* device supports NCQ */ + ATA_DFLAG_FLUSH_EXT = (1 << 4), /* do FLUSH_EXT instead of FLUSH */ ATA_DFLAG_CFG_MASK = (1 << 8) - 1, ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */ -- cgit v1.2.3 From 55a8e2c83ce50548dfef74bb19dfe2b809cb3099 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Nov 2006 18:08:10 +0900 Subject: [PATCH] libata: implement presence detection via polling IDENTIFY On some controllers (ICHs in piix mode), there is *NO* reliable way to determine device presence other than issuing IDENTIFY and see how the transaction proceeds by watching the TF status register. libata acted this way before irq-pio and phantom devices caused very little problem but now that IDENTIFY is performed using IRQ drive PIO, such phantom devices now result in multiple 30sec timeouts during boot. This patch implements ATA_FLAG_DETECT_POLLING. If a LLD sets this flag, libata core issues the initial IDENTIFY in polling mode and if the initial data transfer fails w/ HSM violation, the port is considered to be empty thus replicating the old libata and IDE behavior. Signed-off-by: Jeff Garzik --- include/linux/libata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 36e233cc388..9080789913f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -176,6 +176,8 @@ enum { ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), + ATA_FLAG_DETECT_POLLING = (1 << 14), /* detect device presence by + * polling IDENTIFY */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be @@ -335,6 +337,7 @@ enum ata_completion_errors { AC_ERR_SYSTEM = (1 << 6), /* system error */ AC_ERR_INVALID = (1 << 7), /* invalid argument */ AC_ERR_OTHER = (1 << 8), /* unknown */ + AC_ERR_NODEV_HINT = (1 << 9), /* polling device detection hint */ }; /* forward declarations */ -- cgit v1.2.3 From 582982e6991d6718ddadf8751072b50a850dde48 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 17 Nov 2006 12:05:11 +0900 Subject: [PATCH] libata: remove unused HSM_ST_UNKNOWN HSM_ST_UNKNOWN is not used anywhere. Its value is zero and supposed to serve sanity check purpose but HSM_ST_IDLE is used for that purpose. This unused state causes confusion. After a port is initialized but before the first command is executed, the idle hsm state is UNKNOWN. However, once a command has completed, the idle hsm state is IDLE. This defeats sanity check in ata_pio_task() for the first command. This patch removes HSM_ST_UNKNOWN and consequently make HSM_ST_IDLE the default state. Signed-off-by: Tejun Heo --- include/linux/libata.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 9080789913f..6013211ac7d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -318,7 +318,6 @@ enum { }; enum hsm_task_states { - HSM_ST_UNKNOWN, /* state unknown */ HSM_ST_IDLE, /* no command on going */ HSM_ST, /* (waiting the device to) transfer data */ HSM_ST_LAST, /* (waiting the device to) complete command */ -- cgit v1.2.3 From 3d3cca37559e3ab2b574eda11ed5207ccdb8980a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 16 Nov 2006 10:50:50 +0900 Subject: [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2 This patch implements ATA_FLAG_SETXFER_POLLING and use in pata_via. If this flag is set, transfer mode setting performed by polling not by interrupt. This should help those controllers which raise interrupt before the command is actually complete on SETXFER. Rationale for this approach. * uses existing facility and relatively simple * no busy sleep in the interrupt handler * updating drivers is easy While at it, kill now unused flag ATA_FLAG_SRST in pata_via. Signed-off-by: Tejun Heo --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6013211ac7d..8b57b6a806c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -178,6 +178,7 @@ enum { ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_DETECT_POLLING = (1 << 14), /* detect device presence by * polling IDENTIFY */ + ATA_FLAG_SETXFER_POLLING= (1 << 15), /* use polling for SETXFER */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be -- cgit v1.2.3 From 800b399669ad495ad4361d134df87401ae36f44f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 3 Dec 2006 21:34:13 +0900 Subject: [PATCH] libata: always use polling IDENTIFY libata switched to IRQ-driven IDENTIFY when IRQ-driven PIO was introduced. This has caused a lot of problems including device misdetection and phantom device. ATA_FLAG_DETECT_POLLING was added recently to selectively use polling IDENTIFY on problemetic drivers but many controllers and devices are affected by this problem and trying to adding ATA_FLAG_DETECT_POLLING for each such case is diffcult and not very rewarding. This patch makes libata always use polling IDENTIFY. This is consistent with libata's original behavior and drivers/ide's behavior. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 8b57b6a806c..202283b5df9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -176,9 +176,7 @@ enum { ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), - ATA_FLAG_DETECT_POLLING = (1 << 14), /* detect device presence by - * polling IDENTIFY */ - ATA_FLAG_SETXFER_POLLING= (1 << 15), /* use polling for SETXFER */ + ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be -- cgit v1.2.3 From f90bb153b1493719d18b4529a46ebfe43220ea6c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:51 +1100 Subject: [POWERPC] Make pci_read_irq_line the default This patch reworks the way IRQs are fixed up on PCI for arch powerpc. It makes pci_read_irq_line() called by default in the PCI code for devices that are probed, and add an optional per-device fixup in ppc_md for platforms that really need to correct what they obtain from pci_read_irq_line(). It also removes ppc_md.irq_bus_setup which was only used by pSeries and should not be needed anymore. I've also removed the pSeries s7a workaround as it can't work with the current interrupt code anyway. I'm trying to get one of these machines working so I can test a proper fix for that problem. I also haven't updated the old-style fixup code from 85xx_cds.c because it's actually buggy :) It assigns pci_dev->irq hard coded numbers which is no good with the new IRQ mapping code. It should at least use irq_create_mapping(NULL, hard_coded_number); and possibly also set_irq_type() to set them as level low. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/machdep.h | 2 +- include/asm-powerpc/ppc-pci.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index dac90dc341c..3810f131901 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -86,7 +86,6 @@ struct machdep_calls { void (*tce_flush)(struct iommu_table *tbl); void (*iommu_dev_setup)(struct pci_dev *dev); void (*iommu_bus_setup)(struct pci_bus *bus); - void (*irq_bus_setup)(struct pci_bus *bus); #endif /* CONFIG_PPC64 */ int (*probe)(void); @@ -106,6 +105,7 @@ struct machdep_calls { /* Called after scanning the bus, before allocating resources */ void (*pcibios_fixup)(void); int (*pci_probe_mode)(struct pci_bus *); + void (*pci_irq_fixup)(struct pci_dev *dev); void (*restart)(char *cmd); void (*power_off)(void); diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 1115756c79f..8894d1d4226 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -47,7 +47,6 @@ unsigned long get_phb_buid (struct device_node *); /* From pSeries_pci.h */ extern void pSeries_final_fixup(void); -extern void pSeries_irq_bus_setup(struct pci_bus *bus); extern unsigned long pci_probe_only; -- cgit v1.2.3 From 69108cf00679716bcab58acb3135390654c5bb99 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:52 +1100 Subject: [POWERPC] Remove ppc_md.pci_map_irq & ppc_swizzle for ARCH=powerpc These were inherited from ARCH=ppc, but are not needed since parsing of interrupts should be done via the of_* functions (who can do swizzling). If we ever need to do non-standard swizzling on bridges without a device-node, then we might add back a slightly different version of ppc_md.pci_swizzle but for now, that is not the case. I removed the couple of calls for these in 83xx. If that breaks something, then there is a problem with the device-tree on these. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/machdep.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 3810f131901..162205f6264 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -199,10 +199,6 @@ struct machdep_calls { * Returns 0 to allow assignment/enabling of the device. */ int (*pcibios_enable_device_hook)(struct pci_dev *, int initial); - /* For interrupt routing */ - unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *); - int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char); - /* Called in indirect_* to avoid touching devices */ int (*pci_exclude_device)(unsigned char, unsigned char); -- cgit v1.2.3 From 4c75a6f441cdd1c69a6c173bc7944e12c2ba6f84 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:53 +1100 Subject: [POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/dcr-mmio.h | 51 ++++++++++++++++++++++++++++++++++++++++ include/asm-powerpc/dcr-native.h | 39 ++++++++++++++++++++++++++++++ include/asm-powerpc/dcr.h | 42 +++++++++++++++++++++++++++++++++ 3 files changed, 132 insertions(+) create mode 100644 include/asm-powerpc/dcr-mmio.h create mode 100644 include/asm-powerpc/dcr-native.h create mode 100644 include/asm-powerpc/dcr.h (limited to 'include') diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h new file mode 100644 index 00000000000..5dbfca8dde3 --- /dev/null +++ b/include/asm-powerpc/dcr-mmio.h @@ -0,0 +1,51 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_MMIO_H +#define _ASM_POWERPC_DCR_MMIO_H +#ifdef __KERNEL__ + +#include + +typedef struct { void __iomem *token; unsigned int stride; } dcr_host_t; + +#define DCR_MAP_OK(host) ((host).token != NULL) + +extern dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c); + +static inline u32 dcr_read(dcr_host_t host, unsigned int dcr_n) +{ + return in_be32(host.token + dcr_n * host.stride); +} + +static inline void dcr_write(dcr_host_t host, unsigned int dcr_n, u32 value) +{ + out_be32(host.token + dcr_n * host.stride, value); +} + +extern u64 of_translate_dcr_address(struct device_node *dev, + unsigned int dcr_n, + unsigned int *stride); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_MMIO_H */ + + diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h new file mode 100644 index 00000000000..fd4a5f5e33d --- /dev/null +++ b/include/asm-powerpc/dcr-native.h @@ -0,0 +1,39 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_NATIVE_H +#define _ASM_POWERPC_DCR_NATIVE_H +#ifdef __KERNEL__ + +#include + +typedef struct {} dcr_host_t; + +#define DCR_MAP_OK(host) (1) + +#define dcr_map(dev, dcr_n, dcr_c) {} +#define dcr_unmap(host, dcr_n, dcr_c) {} +#define dcr_read(host, dcr_n) mfdcr(dcr_n) +#define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value) + + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_NATIVE_H */ + + diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h new file mode 100644 index 00000000000..473f2c7fd89 --- /dev/null +++ b/include/asm-powerpc/dcr.h @@ -0,0 +1,42 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_H +#define _ASM_POWERPC_DCR_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC_DCR_NATIVE +#include +#else +#include +#endif + +/* + * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR + * base from the device-tree + */ +#ifdef CONFIG_PPC_MERGE +extern unsigned int dcr_resource_start(struct device_node *np, + unsigned int index); +extern unsigned int dcr_resource_len(struct device_node *np, + unsigned int index); +#endif /* CONFIG_PPC_MERGE */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_H */ -- cgit v1.2.3 From fbf0274e43b7e17ee740fee2d693932be093d56d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:55 +1100 Subject: [POWERPC] Support for DCR based MPIC This patch implements support for DCR based MPIC implementations. Such implementations have the MPIC_USES_DCR flag set and don't use the phys_addr argument of mpic_alloc (they require a valid dcr mapping in the device node) This version of the patch can use a little bif of cleanup still (I can probably consolidate rb->dbase/doff, at least once I'm sure on how the hardware is actually supposed to work vs. possible simulator issues) and it should be possible to build a DCR-only version of the driver. I need to cleanup a bit the CONFIG_* handling for that and probably introduce CONFIG_MPIC_MMIO and CONFIG_MPIC_DCR. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpic.h | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index ef0a5458d2b..ad989d182fb 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -3,6 +3,7 @@ #ifdef __KERNEL__ #include +#include /* * Global registers @@ -225,6 +226,23 @@ struct mpic_irq_fixup #endif /* CONFIG_MPIC_BROKEN_U3 */ +enum mpic_reg_type { + mpic_access_mmio_le, + mpic_access_mmio_be, +#ifdef CONFIG_PPC_DCR + mpic_access_dcr +#endif +}; + +struct mpic_reg_bank { + u32 __iomem *base; +#ifdef CONFIG_PPC_DCR + dcr_host_t dhost; + unsigned int dbase; + unsigned int doff; +#endif /* CONFIG_PPC_DCR */ +}; + /* The instance data of a given MPIC */ struct mpic { @@ -264,11 +282,18 @@ struct mpic spinlock_t fixup_lock; #endif + /* Register access method */ + enum mpic_reg_type reg_type; + /* The various ioremap'ed bases */ - volatile u32 __iomem *gregs; - volatile u32 __iomem *tmregs; - volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS]; - volatile u32 __iomem *isus[MPIC_MAX_ISU]; + struct mpic_reg_bank gregs; + struct mpic_reg_bank tmregs; + struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; + struct mpic_reg_bank isus[MPIC_MAX_ISU]; + +#ifdef CONFIG_PPC_DCR + unsigned int dcr_base; +#endif #ifdef CONFIG_MPIC_WEIRD /* Pointer to HW info array */ @@ -305,6 +330,8 @@ struct mpic #define MPIC_SPV_EOI 0x00000020 /* No passthrough disable */ #define MPIC_NO_PTHROU_DIS 0x00000040 +/* DCR based MPIC */ +#define MPIC_USES_DCR 0x00000080 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 -- cgit v1.2.3 From a959ff56bbf07954ea4fa1cf72f99a38795eadb3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:56 +1100 Subject: [POWERPC] Improve MPIC driver auto-configuration from DT This patch applies on top of the MPIC DCR support. It makes the MPIC driver capable of a lot more auto-configuration based on the device-tree, for example, it can retreive it's own physical address if not passed as an argument, find out if it's DCR or MMIO mapped, and set the BIG_ENDIAN flag automatically in the presence of a "big-endian" property in the device-tree node. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index ad989d182fb..b71e7b32a55 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -364,7 +364,7 @@ struct mpic * that is senses[0] correspond to linux irq "irq_offset". */ extern struct mpic *mpic_alloc(struct device_node *node, - unsigned long phys_addr, + phys_addr_t phys_addr, unsigned int flags, unsigned int isu_size, unsigned int irq_count, @@ -377,7 +377,7 @@ extern struct mpic *mpic_alloc(struct device_node *node, * @phys_addr: physical address of the ISU */ extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - unsigned long phys_addr); + phys_addr_t phys_addr); /* Set default sense codes * -- cgit v1.2.3 From 7eebde700fe6fd6573e80bd8e5ed82b4ae705575 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:59 +1100 Subject: [POWERPC] Souped-up of_platform_device support This patch first splits of_device.c and of_platform.c, the later containing the bits relative to of_platform_device's. On the "breaks" side of things, drivers uisng of_platform_device(s) need to include asm/of_platform.h now and of_(un)register_driver is now of_(un)register_platform_driver. In addition to a few utility functions to locate of_platform_device(s), the main new addition is of_platform_bus_probe() which allows the platform code to trigger an automatic creation of of_platform_devices for a whole tree of devices. The function acts based on the type of the various "parent" devices encountered from a provided root, using either a default known list of bus types that can be "probed" or a passed-in list. It will only register devices on busses matching that list, which mean that typically, it will not register PCI devices, as expected (since they will be picked up by the PCI layer). This will be used by Cell platforms using 4xx-type IOs in the Axon bridge and can be used by any embedded-type device as well. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/of_device.h | 34 ++-------------------- include/asm-powerpc/of_platform.h | 60 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+), 32 deletions(-) create mode 100644 include/asm-powerpc/of_platform.h (limited to 'include') diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h index c5c0b0b3cd5..1ef7e9edd1a 100644 --- a/include/asm-powerpc/of_device.h +++ b/include/asm-powerpc/of_device.h @@ -6,12 +6,6 @@ #include #include -/* - * The of_platform_bus_type is a bus type used by drivers that do not - * attach to a macio or similar bus but still use OF probing - * mechanism - */ -extern struct bus_type of_platform_bus_type; /* * The of_device is a kind of "base class" that is a superset of @@ -26,40 +20,16 @@ struct of_device }; #define to_of_device(d) container_of(d, struct of_device, dev) +extern const struct of_device_id *of_match_node( + const struct of_device_id *matches, const struct device_node *node); extern const struct of_device_id *of_match_device( const struct of_device_id *matches, const struct of_device *dev); extern struct of_device *of_dev_get(struct of_device *dev); extern void of_dev_put(struct of_device *dev); -/* - * An of_platform_driver driver is attached to a basic of_device on - * the "platform bus" (of_platform_bus_type) - */ -struct of_platform_driver -{ - char *name; - struct of_device_id *match_table; - struct module *owner; - - int (*probe)(struct of_device* dev, const struct of_device_id *match); - int (*remove)(struct of_device* dev); - - int (*suspend)(struct of_device* dev, pm_message_t state); - int (*resume)(struct of_device* dev); - int (*shutdown)(struct of_device* dev); - - struct device_driver driver; -}; -#define to_of_platform_driver(drv) container_of(drv,struct of_platform_driver, driver) - -extern int of_register_driver(struct of_platform_driver *drv); -extern void of_unregister_driver(struct of_platform_driver *drv); extern int of_device_register(struct of_device *ofdev); extern void of_device_unregister(struct of_device *ofdev); -extern struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent); extern void of_release_dev(struct device *dev); #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/of_platform.h b/include/asm-powerpc/of_platform.h new file mode 100644 index 00000000000..217eafb167e --- /dev/null +++ b/include/asm-powerpc/of_platform.h @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include + +/* + * The of_platform_bus_type is a bus type used by drivers that do not + * attach to a macio or similar bus but still use OF probing + * mechanism + */ +extern struct bus_type of_platform_bus_type; + +/* + * An of_platform_driver driver is attached to a basic of_device on + * the "platform bus" (of_platform_bus_type) + */ +struct of_platform_driver +{ + char *name; + struct of_device_id *match_table; + struct module *owner; + + int (*probe)(struct of_device* dev, + const struct of_device_id *match); + int (*remove)(struct of_device* dev); + + int (*suspend)(struct of_device* dev, pm_message_t state); + int (*resume)(struct of_device* dev); + int (*shutdown)(struct of_device* dev); + + struct device_driver driver; +}; +#define to_of_platform_driver(drv) \ + container_of(drv,struct of_platform_driver, driver) + +/* Platform drivers register/unregister */ +extern int of_register_platform_driver(struct of_platform_driver *drv); +extern void of_unregister_platform_driver(struct of_platform_driver *drv); + +/* Platform devices and busses creation */ +extern struct of_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent); +/* pseudo "matches" value to not do deep probe */ +#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) + +extern int of_platform_bus_probe(struct device_node *root, + struct of_device_id *matches, + struct device *parent); + +extern struct of_device *of_find_device_by_node(struct device_node *np); +extern struct of_device *of_find_device_by_phandle(phandle ph); -- cgit v1.2.3 From f6a570333e554b48ad589e7137c77c57809eee81 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 18 Oct 2006 01:47:25 -0400 Subject: [PATCH] severing module.h->sched.h Signed-off-by: Al Viro --- include/asm-x86_64/elf.h | 1 - include/linux/acct.h | 1 + include/linux/module.h | 13 +------------ include/scsi/libiscsi.h | 2 ++ 4 files changed, 4 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/asm-x86_64/elf.h b/include/asm-x86_64/elf.h index a406fcb1e92..6d24ea7c4d9 100644 --- a/include/asm-x86_64/elf.h +++ b/include/asm-x86_64/elf.h @@ -45,7 +45,6 @@ typedef struct user_i387_struct elf_fpregset_t; #ifdef __KERNEL__ #include -#include /* * This is used to ensure we don't load something for the wrong architecture. diff --git a/include/linux/acct.h b/include/linux/acct.h index 0496d1f0995..302eb727ecb 100644 --- a/include/linux/acct.h +++ b/include/linux/acct.h @@ -119,6 +119,7 @@ struct acct_v3 #ifdef CONFIG_BSD_PROCESS_ACCT struct vfsmount; struct super_block; +struct pacct_struct; extern void acct_auto_close_mnt(struct vfsmount *m); extern void acct_auto_close(struct super_block *sb); extern void acct_init_pacct(struct pacct_struct *pacct); diff --git a/include/linux/module.h b/include/linux/module.h index 9258ffd8a7f..d33df2408e0 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -6,7 +6,6 @@ * Rewritten by Richard Henderson Dec 1996 * Rewritten again by Rusty Russell, 2002 */ -#include #include #include #include @@ -411,17 +410,7 @@ static inline int try_module_get(struct module *module) return ret; } -static inline void module_put(struct module *module) -{ - if (module) { - unsigned int cpu = get_cpu(); - local_dec(&module->ref[cpu].count); - /* Maybe they're waiting for us to drop reference? */ - if (unlikely(!module_is_live(module))) - wake_up_process(module->waiter); - put_cpu(); - } -} +extern void module_put(struct module *module); #else /*!CONFIG_MODULE_UNLOAD*/ static inline int try_module_get(struct module *module) diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 61eebec00a7..ea0816d4904 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -25,6 +25,8 @@ #include #include +#include +#include #include #include -- cgit v1.2.3 From 914e26379decf1fd984b22e51fd2e4209b7a7f1b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 18 Oct 2006 13:55:46 -0400 Subject: [PATCH] severing fs.h, radix-tree.h -> sched.h Signed-off-by: Al Viro --- include/linux/fs.h | 37 +++++++------------------------------ include/linux/radix-tree.h | 1 - 2 files changed, 7 insertions(+), 31 deletions(-) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 2fe6e3f900b..cac7b1ef954 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -276,7 +276,7 @@ extern int dir_notify_enable; #include #include #include -#include +#include #include #include @@ -977,36 +977,13 @@ enum { #define vfs_check_frozen(sb, level) \ wait_event((sb)->s_wait_unfrozen, ((sb)->s_frozen < (level))) -static inline void get_fs_excl(void) -{ - atomic_inc(¤t->fs_excl); -} - -static inline void put_fs_excl(void) -{ - atomic_dec(¤t->fs_excl); -} - -static inline int has_fs_excl(void) -{ - return atomic_read(¤t->fs_excl); -} +#define get_fs_excl() atomic_inc(¤t->fs_excl) +#define put_fs_excl() atomic_dec(¤t->fs_excl) +#define has_fs_excl() atomic_read(¤t->fs_excl) - -/* - * Superblock locking. - */ -static inline void lock_super(struct super_block * sb) -{ - get_fs_excl(); - mutex_lock(&sb->s_lock); -} - -static inline void unlock_super(struct super_block * sb) -{ - put_fs_excl(); - mutex_unlock(&sb->s_lock); -} +/* not quite ready to be deprecated, but... */ +extern void lock_super(struct super_block *); +extern void unlock_super(struct super_block *); /* * VFS helper functions.. diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 9158a68140c..cbfa1153742 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -19,7 +19,6 @@ #ifndef _LINUX_RADIX_TREE_H #define _LINUX_RADIX_TREE_H -#include #include #include -- cgit v1.2.3 From b07e4ecd4d380ad697c54d729cb653d027077c99 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 19 Oct 2006 10:29:02 -0400 Subject: [PATCH] severing uaccess.h -> sched.h Signed-off-by: Al Viro --- include/asm-x86_64/uaccess.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-x86_64/uaccess.h b/include/asm-x86_64/uaccess.h index 19f99178fe8..d5dbc87274f 100644 --- a/include/asm-x86_64/uaccess.h +++ b/include/asm-x86_64/uaccess.h @@ -6,7 +6,6 @@ */ #include #include -#include #include #include -- cgit v1.2.3 From a1f8e7f7fb9d7e2cbcb53170edca7c0ac4680697 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 19 Oct 2006 16:08:53 -0400 Subject: [PATCH] severing skbuff.h -> highmem.h Signed-off-by: Al Viro --- include/linux/skbuff.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'include') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 14ec16d2d9b..24ce0add6c5 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -1295,24 +1294,6 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) return __pskb_trim(skb, len); } -static inline void *kmap_skb_frag(const skb_frag_t *frag) -{ -#ifdef CONFIG_HIGHMEM - BUG_ON(in_irq()); - - local_bh_disable(); -#endif - return kmap_atomic(frag->page, KM_SKB_DATA_SOFTIRQ); -} - -static inline void kunmap_skb_frag(void *vaddr) -{ - kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ); -#ifdef CONFIG_HIGHMEM - local_bh_enable(); -#endif -} - #define skb_queue_walk(queue, skb) \ for (skb = (queue)->next; \ prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \ -- cgit v1.2.3 From bd01f843c3368dcee735c19603251669f23f4477 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 19 Oct 2006 17:23:57 -0400 Subject: [PATCH] severing skbuff.h -> poll.h Signed-off-by: Al Viro --- include/linux/skbuff.h | 1 - include/net/inet_connection_sock.h | 1 + include/net/udp.h | 1 + 3 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 24ce0add6c5..5c5a08576dc 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index cccea051e92..bf16d98d372 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -18,6 +18,7 @@ #include #include #include +#include #include #include diff --git a/include/net/udp.h b/include/net/udp.h index 1548d68d45d..1b921fa8147 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -29,6 +29,7 @@ #include #include #include +#include /** * struct udp_skb_cb - UDP(-Lite) private variables -- cgit v1.2.3 From d7fe0f241dceade9c8d4af75498765c5ff7f27e6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 3 Dec 2006 23:15:30 -0500 Subject: [PATCH] severing skbuff.h -> mm.h Signed-off-by: Al Viro --- include/linux/igmp.h | 1 + include/linux/kernelcapi.h | 1 + include/linux/netdevice.h | 1 + include/linux/netfilter_ipv4/ip_conntrack.h | 1 + include/linux/skbuff.h | 1 - include/net/irda/timer.h | 1 + include/net/netfilter/nf_conntrack.h | 1 + include/net/netlink.h | 1 + include/net/sock.h | 1 + 9 files changed, 8 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/igmp.h b/include/linux/igmp.h index 6e7ea2f0a57..9dbb525c517 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -127,6 +127,7 @@ struct igmpv3_query { #ifdef __KERNEL__ #include +#include #include extern int sysctl_igmp_max_memberships; diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h index 891bb2cf0aa..f8a0ff86dac 100644 --- a/include/linux/kernelcapi.h +++ b/include/linux/kernelcapi.h @@ -47,6 +47,7 @@ typedef struct kcapi_carddef { #include #include +#include #define KCI_CONTRUP 0 /* arg: struct capi_profile */ #define KCI_CONTRDOWN 1 /* arg: NULL */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 949eada46ce..c57088f575a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -30,6 +30,7 @@ #include #ifdef __KERNEL__ +#include #include #include #include diff --git a/include/linux/netfilter_ipv4/ip_conntrack.h b/include/linux/netfilter_ipv4/ip_conntrack.h index 61da56941dc..33581c13d94 100644 --- a/include/linux/netfilter_ipv4/ip_conntrack.h +++ b/include/linux/netfilter_ipv4/ip_conntrack.h @@ -9,6 +9,7 @@ #include #include +#include #include #include #include diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 5c5a08576dc..6bdff9b148d 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/include/net/irda/timer.h b/include/net/irda/timer.h index 2c5d8864ab7..cb61568547d 100644 --- a/include/net/irda/timer.h +++ b/include/net/irda/timer.h @@ -28,6 +28,7 @@ #define TIMER_H #include +#include #include /* for HZ */ diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index 032b36a0e37..bd01b4633ee 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -56,6 +56,7 @@ union nf_conntrack_help { #include #include +#include #ifdef CONFIG_NETFILTER_DEBUG #define NF_CT_ASSERT(x) \ diff --git a/include/net/netlink.h b/include/net/netlink.h index fd75fd65d59..bcaf67b7a19 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -3,6 +3,7 @@ #include #include +#include /* ======================================================================== * Netlink Messages and Attributes Interface (As Seen On TV) diff --git a/include/net/sock.h b/include/net/sock.h index 26fc0b16bc0..fe3a33fad03 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -47,6 +47,7 @@ #include #include #include /* struct sk_buff */ +#include #include #include -- cgit v1.2.3 From f23f6e08c47acbdd20e9c49a79da8c404ea168e1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 20 Oct 2006 15:17:02 -0400 Subject: [PATCH] severing poll.h -> mm.h Signed-off-by: Al Viro --- include/linux/poll.h | 3 ++- include/sound/pcm.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/poll.h b/include/linux/poll.h index 51e1b56741f..27690798623 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -8,7 +8,8 @@ #include #include #include -#include +#include +#include #include /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating diff --git a/include/sound/pcm.h b/include/sound/pcm.h index afaf3e88e08..2f645dfd7f7 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -26,6 +26,7 @@ #include #include #include +#include #include #define snd_pcm_substream_chip(substream) ((substream)->private_data) -- cgit v1.2.3 From 12d04eef927bf61328af2c7cbe756c96f98ac3bf Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:02 +1100 Subject: [POWERPC] Refactor 64 bits DMA operations This patch completely refactors DMA operations for 64 bits powerpc. 32 bits is untouched for now. We use the new dev_archdata structure to add the dma operations pointer and associated data to struct device. While at it, we also add the OF node pointer and numa node. In the future, we might want to look into merging that with pci_dn as well. The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced by a set of generic iommu and direct DMA ops (non PCI specific) that can be used by bus types. The toplevel implementation is now inline. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/device.h | 19 +++- include/asm-powerpc/dma-mapping.h | 180 ++++++++++++++++++++++++++++-------- include/asm-powerpc/ibmebus.h | 1 - include/asm-powerpc/iommu.h | 20 ++-- include/asm-powerpc/iseries/iommu.h | 4 +- include/asm-powerpc/machdep.h | 4 +- include/asm-powerpc/of_device.h | 2 +- include/asm-powerpc/pci.h | 8 +- include/asm-powerpc/vio.h | 1 - 9 files changed, 180 insertions(+), 59 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/device.h b/include/asm-powerpc/device.h index d8f9872b0e2..228ab2a315b 100644 --- a/include/asm-powerpc/device.h +++ b/include/asm-powerpc/device.h @@ -3,5 +3,22 @@ * * This file is released under the GPLv2 */ -#include +#ifndef _ASM_POWERPC_DEVICE_H +#define _ASM_POWERPC_DEVICE_H +struct dma_mapping_ops; +struct device_node; + +struct dev_archdata { + /* Optional pointer to an OF device node */ + struct device_node *of_node; + + /* DMA operations on that device */ + struct dma_mapping_ops *dma_ops; + void *dma_data; + + /* NUMA node if applicable */ + int numa_node; +}; + +#endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 2ab9baf78bb..8367810c994 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -44,26 +44,148 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, #endif /* ! CONFIG_NOT_COHERENT_CACHE */ #ifdef CONFIG_PPC64 +/* + * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO + */ +struct dma_mapping_ops { + void * (*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + void (*free_coherent)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *dev, void *ptr, + size_t size, enum dma_data_direction direction); + void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction); + int (*map_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); + void (*unmap_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); + int (*dma_supported)(struct device *dev, u64 mask); + int (*dac_dma_supported)(struct device *dev, u64 mask); + int (*set_dma_mask)(struct device *dev, u64 dma_mask); +}; + +static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) +{ + /* We don't handle the NULL dev case for ISA for now. We could + * do it via an out of line call but it is not needed for now. The + * only ISA DMA device we support is the floppy and we have a hack + * in the floppy driver directly to get a device for us. + */ + if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL)) + return NULL; + return dev->archdata.dma_ops; +} + +static inline int dma_supported(struct device *dev, u64 mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return 0; + if (dma_ops->dma_supported == NULL) + return 1; + return dma_ops->dma_supported(dev, mask); +} + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return -EIO; + if (dma_ops->set_dma_mask != NULL) + return dma_ops->set_dma_mask(dev, dma_mask); + if (!dev->dma_mask || !dma_supported(dev, *dev->dma_mask)) + return -EIO; + *dev->dma_mask = dma_mask; + return 0; +} + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); +} + +static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, cpu_addr, size, direction); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_addr, size, direction); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, page_address(page) + offset, size, + direction); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_address, size, direction); +} + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_sg(dev, sg, nents, direction); +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_sg(dev, sg, nhwentries, direction); +} -extern int dma_supported(struct device *dev, u64 mask); -extern int dma_set_mask(struct device *dev, u64 dma_mask); -extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); -extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle); -extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, enum dma_data_direction direction); -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); -extern dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction); -extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction); -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction); + +/* + * Available generic sets of operations + */ +extern struct dma_mapping_ops dma_iommu_ops; +extern struct dma_mapping_ops dma_direct_ops; #else /* CONFIG_PPC64 */ @@ -261,25 +383,5 @@ static inline void dma_cache_sync(void *vaddr, size_t size, __dma_sync(vaddr, size, (int)direction); } -/* - * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO - */ -struct dma_mapping_ops { - void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - dma_addr_t (*map_single)(struct device *dev, void *ptr, - size_t size, enum dma_data_direction direction); - void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); - int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); - void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); - int (*dma_supported)(struct device *dev, u64 mask); - int (*dac_dma_supported)(struct device *dev, u64 mask); -}; - #endif /* __KERNEL__ */ #endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-powerpc/ibmebus.h b/include/asm-powerpc/ibmebus.h index 3493429b70f..66112114b8c 100644 --- a/include/asm-powerpc/ibmebus.h +++ b/include/asm-powerpc/ibmebus.h @@ -44,7 +44,6 @@ #include #include -extern struct dma_mapping_ops ibmebus_dma_ops; extern struct bus_type ibmebus_bus_type; struct ibmebus_dev { diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index 19e6f7e0a60..19403183dbb 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -79,22 +79,22 @@ extern void iommu_free_table(struct device_node *dn); extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, int nid); -extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, - struct scatterlist *sglist, int nelems, unsigned long mask, - enum dma_data_direction direction); +extern int iommu_map_sg(struct iommu_table *tbl, struct scatterlist *sglist, + int nelems, unsigned long mask, + enum dma_data_direction direction); extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction); + int nelems, enum dma_data_direction direction); extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, unsigned long mask, - gfp_t flag, int node); + dma_addr_t *dma_handle, unsigned long mask, + gfp_t flag, int node); extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, - void *vaddr, dma_addr_t dma_handle); + void *vaddr, dma_addr_t dma_handle); extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, - size_t size, unsigned long mask, - enum dma_data_direction direction); + size_t size, unsigned long mask, + enum dma_data_direction direction); extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction); + size_t size, enum dma_data_direction direction); extern void iommu_init_early_pSeries(void); extern void iommu_init_early_iSeries(void); diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h index 0edbfe10cb3..6e323a13ac3 100644 --- a/include/asm-powerpc/iseries/iommu.h +++ b/include/asm-powerpc/iseries/iommu.h @@ -21,11 +21,13 @@ * Boston, MA 02111-1307 USA */ +struct pci_dev; struct device_node; struct iommu_table; /* Creates table for an individual device node */ -extern void iommu_devnode_init_iSeries(struct device_node *dn); +extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, + struct device_node *dn); /* Get table parameters from HV */ extern void iommu_table_getparms_iSeries(unsigned long busno, diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 162205f6264..ccc29744656 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -84,8 +84,8 @@ struct machdep_calls { unsigned long (*tce_get)(struct iommu_table *tbl, long index); void (*tce_flush)(struct iommu_table *tbl); - void (*iommu_dev_setup)(struct pci_dev *dev); - void (*iommu_bus_setup)(struct pci_bus *bus); + void (*pci_dma_dev_setup)(struct pci_dev *dev); + void (*pci_dma_bus_setup)(struct pci_bus *bus); #endif /* CONFIG_PPC64 */ int (*probe)(void); diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h index 1ef7e9edd1a..a889b2005bf 100644 --- a/include/asm-powerpc/of_device.h +++ b/include/asm-powerpc/of_device.h @@ -14,7 +14,7 @@ */ struct of_device { - struct device_node *node; /* OF device node */ + struct device_node *node; /* to be obsoleted */ u64 dma_mask; /* DMA mask */ struct device dev; /* Generic device interface */ }; diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h index c7728605149..16f13319c76 100644 --- a/include/asm-powerpc/pci.h +++ b/include/asm-powerpc/pci.h @@ -70,15 +70,15 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) */ #define PCI_DISABLE_MWI -extern struct dma_mapping_ops pci_dma_ops; +extern struct dma_mapping_ops *pci_dma_ops; /* For DAC DMA, we currently don't support it by default, but * we let 64-bit platforms override this. */ static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask) { - if (pci_dma_ops.dac_dma_supported) - return pci_dma_ops.dac_dma_supported(&hwdev->dev, mask); + if (pci_dma_ops && pci_dma_ops->dac_dma_supported) + return pci_dma_ops->dac_dma_supported(&hwdev->dev, mask); return 0; } @@ -210,6 +210,8 @@ extern int remap_bus_range(struct pci_bus *bus); extern void pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus); +extern void pcibios_setup_new_device(struct pci_dev *dev); + extern void pcibios_claim_one_bus(struct pci_bus *b); extern struct pci_controller *init_phb_dynamic(struct device_node *dn); diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h index 4b51d42e141..0117b544ecb 100644 --- a/include/asm-powerpc/vio.h +++ b/include/asm-powerpc/vio.h @@ -45,7 +45,6 @@ struct iommu_table; * The vio_dev structure is used to describe virtual I/O devices. */ struct vio_dev { - struct iommu_table *iommu_table; /* vio_map_* uses this */ const char *name; const char *type; uint32_t unit_address; -- cgit v1.2.3 From 803d4573e60bc890d7fbc040ad1c18c2dc7f8279 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:07 +1100 Subject: [POWERPC] Add "parent" struct device for PCI host bridges Add a "parent" struct device to our PCI host bridge data structure so that PCI can be rooted off another device in sysfs. Note that arch/ppc doesn't use it, only arch/powerpc, though it's available for both 32 and 64 bits. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/pci-bridge.h | 1 + include/asm-ppc/pci-bridge.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index 86ee46b09b8..7bb7f900980 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -25,6 +25,7 @@ struct pci_controller { int node; void *arch_data; struct list_head list_node; + struct device *parent; int first_busno; int last_busno; diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h index 9d5230689b3..6c955d0c1ef 100644 --- a/include/asm-ppc/pci-bridge.h +++ b/include/asm-ppc/pci-bridge.h @@ -43,6 +43,7 @@ struct pci_controller { struct pci_controller *next; struct pci_bus *bus; void *arch_data; + struct device *parent; int first_busno; int last_busno; -- cgit v1.2.3 From 4c9d2800be5dfabf26acdeb401cbabe9edc1dcf2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:08 +1100 Subject: [POWERPC] Generic OF platform driver for PCI host bridges. When enabled in Kconfig, it will pick up any of_platform_device matching it's match list (currently type "pci", "pcix", "pcie", or "ht" and setup a PHB for it. Platform must provide a ppc_md.pci_setup_phb() for it to work (for doing the necessary initialisations specific to a given PHB like setting up the config space ops). It's currently only available on 64 bits as the 32 bits PCI code can't quite cope with it in it's current form. I will fix that later. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/machdep.h | 4 ++++ include/asm-powerpc/ppc-pci.h | 12 ++++++------ 2 files changed, 10 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index ccc29744656..23580cf5504 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -26,6 +26,7 @@ struct device_node; struct iommu_table; struct rtc_time; struct file; +struct pci_controller; #ifdef CONFIG_KEXEC struct kimage; #endif @@ -107,6 +108,9 @@ struct machdep_calls { int (*pci_probe_mode)(struct pci_bus *); void (*pci_irq_fixup)(struct pci_dev *dev); + /* To setup PHBs when using automatic OF platform driver for PCI */ + int (*pci_setup_phb)(struct pci_controller *host); + void (*restart)(char *cmd); void (*power_off)(void); void (*halt)(void); diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 8894d1d4226..ab6eddb518c 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -36,14 +36,14 @@ typedef void *(*traverse_func)(struct device_node *me, void *data); void *traverse_pci_devices(struct device_node *start, traverse_func pre, void *data); -void pci_devs_phb_init(void); -void pci_devs_phb_init_dynamic(struct pci_controller *phb); -int setup_phb(struct device_node *dev, struct pci_controller *phb); -void __devinit scan_phb(struct pci_controller *hose); +extern void pci_devs_phb_init(void); +extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); +extern void scan_phb(struct pci_controller *hose); /* From rtas_pci.h */ -void init_pci_config_tokens (void); -unsigned long get_phb_buid (struct device_node *); +extern void init_pci_config_tokens (void); +extern unsigned long get_phb_buid (struct device_node *); +extern int rtas_setup_phb(struct pci_controller *phb); /* From pSeries_pci.h */ extern void pSeries_final_fixup(void); -- cgit v1.2.3 From 4cb3cee03d558fd457cb58f56c80a2a09a66110c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:10 +1100 Subject: [POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bits This patch reworks the way iSeries hooks on PCI IO operations (both MMIO and PIO) and provides a generic way for other platforms to do so (we have need to do that for various other platforms). While reworking the IO ops, I ended up doing some spring cleaning in io.h and eeh.h which I might want to split into 2 or 3 patches (among others, eeh.h had a lot of useless stuff in it). A side effect is that EEH for PIO should work now (it used to pass IO ports down to the eeh address check functions which is bogus). Also, new are MMIO "repeat" ops, which other archs like ARM already had, and that we have too now: readsb, readsw, readsl, writesb, writesw, writesl. In the long run, I might also make EEH use the hooks instead of wrapping at the toplevel, which would make things even cleaner and relegate EEH completely in platforms/iseries, but we have to measure the performance impact there (though it's really only on MMIO reads) Since I also need to hook on ioremap, I shuffled the functions a bit there. I introduced ioremap_flags() to use by drivers who want to pass explicit flags to ioremap (and it can be hooked). The old __ioremap() is still there as a low level and cannot be hooked, thus drivers who use it should migrate unless they know they want the low level version. The patch "arch provides generic iomap missing accessors" (should be number 4 in this series) is a pre-requisite to provide full iomap API support with this patch. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/eeh.h | 118 ++------ include/asm-powerpc/ide.h | 7 + include/asm-powerpc/io-defs.h | 56 ++++ include/asm-powerpc/io.h | 641 +++++++++++++++++++++++++----------------- include/asm-powerpc/machdep.h | 4 + include/asm-ppc/io.h | 12 +- 6 files changed, 477 insertions(+), 361 deletions(-) create mode 100644 include/asm-powerpc/io-defs.h (limited to 'include') diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 6a784396660..66481bbf270 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -120,10 +120,6 @@ static inline u8 eeh_readb(const volatile void __iomem *addr) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writeb(u8 val, volatile void __iomem *addr) -{ - out_8(addr, val); -} static inline u16 eeh_readw(const volatile void __iomem *addr) { @@ -132,21 +128,6 @@ static inline u16 eeh_readw(const volatile void __iomem *addr) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writew(u16 val, volatile void __iomem *addr) -{ - out_le16(addr, val); -} -static inline u16 eeh_raw_readw(const volatile void __iomem *addr) -{ - u16 val = in_be16(addr); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure(addr, val); - return val; -} -static inline void eeh_raw_writew(u16 val, volatile void __iomem *addr) { - volatile u16 __iomem *vaddr = (volatile u16 __iomem *) addr; - out_be16(vaddr, val); -} static inline u32 eeh_readl(const volatile void __iomem *addr) { @@ -155,44 +136,38 @@ static inline u32 eeh_readl(const volatile void __iomem *addr) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writel(u32 val, volatile void __iomem *addr) -{ - out_le32(addr, val); -} -static inline u32 eeh_raw_readl(const volatile void __iomem *addr) + +static inline u64 eeh_readq(const volatile void __iomem *addr) { - u32 val = in_be32(addr); - if (EEH_POSSIBLE_ERROR(val, u32)) + u64 val = in_le64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) return eeh_check_failure(addr, val); return val; } -static inline void eeh_raw_writel(u32 val, volatile void __iomem *addr) -{ - out_be32(addr, val); -} -static inline u64 eeh_readq(const volatile void __iomem *addr) +static inline u16 eeh_readw_be(const volatile void __iomem *addr) { - u64 val = in_le64(addr); - if (EEH_POSSIBLE_ERROR(val, u64)) + u16 val = in_be16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writeq(u64 val, volatile void __iomem *addr) + +static inline u32 eeh_readl_be(const volatile void __iomem *addr) { - out_le64(addr, val); + u32 val = in_be32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + return eeh_check_failure(addr, val); + return val; } -static inline u64 eeh_raw_readq(const volatile void __iomem *addr) + +static inline u64 eeh_readq_be(const volatile void __iomem *addr) { u64 val = in_be64(addr); if (EEH_POSSIBLE_ERROR(val, u64)) return eeh_check_failure(addr, val); return val; } -static inline void eeh_raw_writeq(u64 val, volatile void __iomem *addr) -{ - out_be64(addr, val); -} #define EEH_CHECK_ALIGN(v,a) \ ((((unsigned long)(v)) & ((a) - 1)) == 0) @@ -292,68 +267,29 @@ static inline void eeh_memcpy_toio(volatile void __iomem *dest, const void *src, #undef EEH_CHECK_ALIGN -static inline u8 eeh_inb(unsigned long port) -{ - u8 val; - val = in_8((u8 __iomem *)(port+pci_io_base)); - if (EEH_POSSIBLE_ERROR(val, u8)) - return eeh_check_failure((void __iomem *)(port), val); - return val; -} - -static inline void eeh_outb(u8 val, unsigned long port) -{ - out_8((u8 __iomem *)(port+pci_io_base), val); -} - -static inline u16 eeh_inw(unsigned long port) -{ - u16 val; - val = in_le16((u16 __iomem *)(port+pci_io_base)); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure((void __iomem *)(port), val); - return val; -} - -static inline void eeh_outw(u16 val, unsigned long port) -{ - out_le16((u16 __iomem *)(port+pci_io_base), val); -} - -static inline u32 eeh_inl(unsigned long port) -{ - u32 val; - val = in_le32((u32 __iomem *)(port+pci_io_base)); - if (EEH_POSSIBLE_ERROR(val, u32)) - return eeh_check_failure((void __iomem *)(port), val); - return val; -} - -static inline void eeh_outl(u32 val, unsigned long port) -{ - out_le32((u32 __iomem *)(port+pci_io_base), val); -} - /* in-string eeh macros */ -static inline void eeh_insb(unsigned long port, void * buf, int ns) +static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, + int ns) { - _insb((u8 __iomem *)(port+pci_io_base), buf, ns); + _insb(addr, buf, ns); if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8)) - eeh_check_failure((void __iomem *)(port), *(u8*)buf); + eeh_check_failure(addr, *(u8*)buf); } -static inline void eeh_insw_ns(unsigned long port, void * buf, int ns) +static inline void eeh_readsw(const volatile void __iomem *addr, void * buf, + int ns) { - _insw_ns((u16 __iomem *)(port+pci_io_base), buf, ns); + _insw(addr, buf, ns); if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16)) - eeh_check_failure((void __iomem *)(port), *(u16*)buf); + eeh_check_failure(addr, *(u16*)buf); } -static inline void eeh_insl_ns(unsigned long port, void * buf, int nl) +static inline void eeh_readsl(const volatile void __iomem *addr, void * buf, + int nl) { - _insl_ns((u32 __iomem *)(port+pci_io_base), buf, nl); + _insl(addr, buf, nl); if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32)) - eeh_check_failure((void __iomem *)(port), *(u32*)buf); + eeh_check_failure(addr, *(u32*)buf); } #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index c8390f9485d..60a8fc42997 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -22,10 +22,17 @@ #endif #endif +#ifdef __powerpc64__ +#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) +#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) +#else #define __ide_mm_insw(p, a, c) _insw_ns((volatile u16 __iomem *)(p), (a), (c)) #define __ide_mm_insl(p, a, c) _insl_ns((volatile u32 __iomem *)(p), (a), (c)) #define __ide_mm_outsw(p, a, c) _outsw_ns((volatile u16 __iomem *)(p), (a), (c)) #define __ide_mm_outsl(p, a, c) _outsl_ns((volatile u32 __iomem *)(p), (a), (c)) +#endif #ifndef __powerpc64__ #include diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h new file mode 100644 index 00000000000..5a660f1130d --- /dev/null +++ b/include/asm-powerpc/io-defs.h @@ -0,0 +1,56 @@ +/* This file is meant to be include multiple times by other headers */ + +DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr)) + +DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port)) +DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port)) +DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port)) +DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port)) +DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port)) +DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port)) + +DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), \ + (a, b, c)) + +DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), \ + (p, b, c)) + +DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), \ + (a, c, n)) +DEF_PCI_AC_NORET(memcpy_fromio,(void *d,const PCI_IO_ADDR s,unsigned long n), \ + (d, s, n)) +DEF_PCI_AC_NORET(memcpy_toio,(PCI_IO_ADDR d,const void *s,unsigned long n), \ + (d, s, n)) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index c2c5f14b5f5..03e843fc143 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -31,57 +31,122 @@ extern int check_legacy_ioport(unsigned long base_port); #define SLOW_DOWN_IO +/* + * + * Low level MMIO accessors + * + * This provides the non-bus specific accessors to MMIO. Those are PowerPC + * specific and thus shouldn't be used in generic code. The accessors + * provided here are: + * + * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 + * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 + * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns + * + * Those operate directly on a kernel virtual address. Note that the prototype + * for the out_* accessors has the arguments in opposite order from the usual + * linux PCI accessors. Unlike those, they take the address first and the value + * next. + * + * Note: I might drop the _ns suffix on the stream operations soon as it is + * simply normal for stream operations to not swap in the first place. + * + */ + +#define IO_SET_SYNC_FLAG() do { get_paca()->io_sync = 1; } while(0) + +#define DEF_MMIO_IN(name, type, insn) \ +static inline type name(const volatile type __iomem *addr) \ +{ \ + type ret; \ + __asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \ + : "=r" (ret) : "r" (addr), "m" (*addr)); \ + return ret; \ +} + +#define DEF_MMIO_OUT(name, type, insn) \ +static inline void name(volatile type __iomem *addr, type val) \ +{ \ + __asm__ __volatile__("sync;" insn \ + : "=m" (*addr) : "r" (val), "r" (addr)); \ + IO_SET_SYNC_FLAG(); \ +} + + +#define DEF_MMIO_IN_BE(name, size, insn) \ + DEF_MMIO_IN(name, u##size, __stringify(insn)"%U2%X2 %0,%2") +#define DEF_MMIO_IN_LE(name, size, insn) \ + DEF_MMIO_IN(name, u##size, __stringify(insn)" %0,0,%1") + +#define DEF_MMIO_OUT_BE(name, size, insn) \ + DEF_MMIO_OUT(name, u##size, __stringify(insn)"%U0%X0 %1,%0") +#define DEF_MMIO_OUT_LE(name, size, insn) \ + DEF_MMIO_OUT(name, u##size, __stringify(insn)" %1,0,%2") + +DEF_MMIO_IN_BE(in_8, 8, lbz); +DEF_MMIO_IN_BE(in_be16, 16, lhz); +DEF_MMIO_IN_BE(in_be32, 32, lwz); +DEF_MMIO_IN_BE(in_be64, 64, ld); +DEF_MMIO_IN_LE(in_le16, 16, lhbrx); +DEF_MMIO_IN_LE(in_le32, 32, lwbrx); + +DEF_MMIO_OUT_BE(out_8, 8, stb); +DEF_MMIO_OUT_BE(out_be16, 16, sth); +DEF_MMIO_OUT_BE(out_be32, 32, stw); +DEF_MMIO_OUT_BE(out_be64, 64, std); +DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); +DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static inline u64 in_le64(const volatile u64 __iomem *addr) +{ + return le64_to_cpu(in_be64(addr)); +} + +static inline void out_le64(volatile u64 __iomem *addr, u64 val) +{ + out_be64(addr, cpu_to_le64(val)); +} + +/* + * Low level IO stream instructions are defined out of line for now + */ +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); + +/* The _ns naming is historical and will be removed. For now, just #define + * the non _ns equivalent names + */ +#define _insw _insw_ns +#define _insl _insl_ns +#define _outsw _outsw_ns +#define _outsl _outsl_ns + +/* + * + * PCI and standard ISA accessors + * + * Those are globally defined linux accessors for devices on PCI or ISA + * busses. They follow the Linux defined semantics. The current implementation + * for PowerPC is as close as possible to the x86 version of these, and thus + * provides fairly heavy weight barriers for the non-raw versions + * + * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO + * allowing the platform to provide its own implementation of some or all + * of the accessors. + */ + extern unsigned long isa_io_base; extern unsigned long pci_io_base; -#ifdef CONFIG_PPC_ISERIES - -extern int in_8(const volatile unsigned char __iomem *addr); -extern void out_8(volatile unsigned char __iomem *addr, int val); -extern int in_le16(const volatile unsigned short __iomem *addr); -extern int in_be16(const volatile unsigned short __iomem *addr); -extern void out_le16(volatile unsigned short __iomem *addr, int val); -extern void out_be16(volatile unsigned short __iomem *addr, int val); -extern unsigned in_le32(const volatile unsigned __iomem *addr); -extern unsigned in_be32(const volatile unsigned __iomem *addr); -extern void out_le32(volatile unsigned __iomem *addr, int val); -extern void out_be32(volatile unsigned __iomem *addr, int val); -extern unsigned long in_le64(const volatile unsigned long __iomem *addr); -extern unsigned long in_be64(const volatile unsigned long __iomem *addr); -extern void out_le64(volatile unsigned long __iomem *addr, unsigned long val); -extern void out_be64(volatile unsigned long __iomem *addr, unsigned long val); - -extern unsigned char __raw_readb(const volatile void __iomem *addr); -extern unsigned short __raw_readw(const volatile void __iomem *addr); -extern unsigned int __raw_readl(const volatile void __iomem *addr); -extern unsigned long __raw_readq(const volatile void __iomem *addr); -extern void __raw_writeb(unsigned char v, volatile void __iomem *addr); -extern void __raw_writew(unsigned short v, volatile void __iomem *addr); -extern void __raw_writel(unsigned int v, volatile void __iomem *addr); -extern void __raw_writeq(unsigned long v, volatile void __iomem *addr); - -extern void memset_io(volatile void __iomem *addr, int c, unsigned long n); -extern void memcpy_fromio(void *dest, const volatile void __iomem *src, - unsigned long n); -extern void memcpy_toio(volatile void __iomem *dest, const void *src, - unsigned long n); - -#else /* CONFIG_PPC_ISERIES */ - -#define in_8(addr) __in_8((addr)) -#define out_8(addr, val) __out_8((addr), (val)) -#define in_le16(addr) __in_le16((addr)) -#define in_be16(addr) __in_be16((addr)) -#define out_le16(addr, val) __out_le16((addr), (val)) -#define out_be16(addr, val) __out_be16((addr), (val)) -#define in_le32(addr) __in_le32((addr)) -#define in_be32(addr) __in_be32((addr)) -#define out_le32(addr, val) __out_le32((addr), (val)) -#define out_be32(addr, val) __out_be32((addr), (val)) -#define in_le64(addr) __in_le64((addr)) -#define in_be64(addr) __in_be64((addr)) -#define out_le64(addr, val) __out_le64((addr), (val)) -#define out_be64(addr, val) __out_be64((addr), (val)) + +/* + * Non ordered and non-swapping "raw" accessors + */ static inline unsigned char __raw_readb(const volatile void __iomem *addr) { @@ -115,52 +180,203 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) { *(volatile unsigned long __force *)addr = v; } -#define memset_io(a,b,c) eeh_memset_io((a),(b),(c)) -#define memcpy_fromio(a,b,c) eeh_memcpy_fromio((a),(b),(c)) -#define memcpy_toio(a,b,c) eeh_memcpy_toio((a),(b),(c)) -#endif /* CONFIG_PPC_ISERIES */ /* - * The insw/outsw/insl/outsl macros don't do byte-swapping. - * They are only used in practice for transferring buffers which - * are arrays of bytes, and byte-swapping is not appropriate in - * that case. - paulus */ -#define insb(port, buf, ns) eeh_insb((port), (buf), (ns)) -#define insw(port, buf, ns) eeh_insw_ns((port), (buf), (ns)) -#define insl(port, buf, nl) eeh_insl_ns((port), (buf), (nl)) - -#define outsb(port, buf, ns) _outsb((u8 __iomem *)((port)+pci_io_base), (buf), (ns)) -#define outsw(port, buf, ns) _outsw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns)) -#define outsl(port, buf, nl) _outsl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl)) - -#define readb(addr) eeh_readb(addr) -#define readw(addr) eeh_readw(addr) -#define readl(addr) eeh_readl(addr) -#define readq(addr) eeh_readq(addr) -#define writeb(data, addr) eeh_writeb((data), (addr)) -#define writew(data, addr) eeh_writew((data), (addr)) -#define writel(data, addr) eeh_writel((data), (addr)) -#define writeq(data, addr) eeh_writeq((data), (addr)) -#define inb(port) eeh_inb((unsigned long)port) -#define outb(val, port) eeh_outb(val, (unsigned long)port) -#define inw(port) eeh_inw((unsigned long)port) -#define outw(val, port) eeh_outw(val, (unsigned long)port) -#define inl(port) eeh_inl((unsigned long)port) -#define outl(val, port) eeh_outl(val, (unsigned long)port) + * + * PCI PIO and MMIO accessors. + * + */ + +#include + +/* Shortcut to the MMIO argument pointer */ +#define PCI_IO_ADDR volatile void __iomem * + +/* Indirect IO address tokens: + * + * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks + * on all IOs. + * + * To help platforms who may need to differenciate MMIO addresses in + * their hooks, a bitfield is reserved for use by the platform near the + * top of MMIO addresses (not PIO, those have to cope the hard way). + * + * This bit field is 12 bits and is at the top of the IO virtual + * addresses PCI_IO_INDIRECT_TOKEN_MASK. + * + * The kernel virtual space is thus: + * + * 0xD000000000000000 : vmalloc + * 0xD000080000000000 : PCI PHB IO space + * 0xD000080080000000 : ioremap + * 0xD0000fffffffffff : end of ioremap region + * + * Since the top 4 bits are reserved as the region ID, we use thus + * the next 12 bits and keep 4 bits available for the future if the + * virtual address space is ever to be extended. + * + * The direct IO mapping operations will then mask off those bits + * before doing the actual access, though that only happen when + * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that + * mechanism + */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul +#define PCI_IO_IND_TOKEN_SHIFT 48 +#define PCI_FIX_ADDR(addr) \ + ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) +#define PCI_GET_ADDR_TOKEN(addr) \ + (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ + PCI_IO_IND_TOKEN_SHIFT) +#define PCI_SET_ADDR_TOKEN(addr, token) \ +do { \ + unsigned long __a = (unsigned long)(addr); \ + __a &= ~PCI_IO_IND_TOKEN_MASK; \ + __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ + (addr) = (void __iomem *)__a; \ +} while(0) +#else +#define PCI_FIX_ADDR(addr) (addr) +#endif + +/* The "__do_*" operations below provide the actual "base" implementation + * for each of the defined acccessor. Some of them use the out_* functions + * directly, some of them still use EEH, though we might change that in the + * future. Those macros below provide the necessary argument swapping and + * handling of the IO base for PIO. + * + * They are themselves used by the macros that define the actual accessors + * and can be used by the hooks if any. + * + * Note that PIO operations are always defined in terms of their corresonding + * MMIO operations. That allows platforms like iSeries who want to modify the + * behaviour of both to only hook on the MMIO version and get both. It's also + * possible to hook directly at the toplevel PIO operation if they have to + * be handled differently + */ +#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) +#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) +#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) +#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) +#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) +#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) +#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) +#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) + +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)pci_io_base+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)pci_io_base+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)pci_io_base+port); +#define __do_inb(port) readb((PCI_IO_ADDR)pci_io_base + port); +#define __do_inw(port) readw((PCI_IO_ADDR)pci_io_base + port); +#define __do_inl(port) readl((PCI_IO_ADDR)pci_io_base + port); + +#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) + +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) eeh_memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_fromio(dst, src, n) eeh_memcpy_fromio(dst, \ + PCI_FIX_ADDR(src), n) +#define __do_memcpy_toio(dst, src, n) eeh_memcpy_toio(PCI_FIX_ADDR(dst), \ + src, n) + +#ifdef CONFIG_PPC_INDIRECT_IO +#define DEF_PCI_HOOK(x) x +#else +#define DEF_PCI_HOOK(x) NULL +#endif + +/* Structure containing all the hooks */ +extern struct ppc_pci_io { + +#define DEF_PCI_AC_RET(name, ret, at, al) ret (*name) at; +#define DEF_PCI_AC_NORET(name, at, al) void (*name) at; + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +} ppc_pci_io; + +/* The inline wrappers */ +#define DEF_PCI_AC_RET(name, ret, at, al) \ +static inline ret name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + return ppc_pci_io.name al; \ + return __do_##name al; \ +} + +#define DEF_PCI_AC_NORET(name, at, al) \ +static inline void name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + ppc_pci_io.name al; \ + else \ + __do_##name al; \ +} + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +/* Some drivers check for the presence of readq & writeq with + * a #ifdef, so we make them happy here. + */ +#define readq readq +#define writeq writeq + +/* Nothing to do for cache stuff x*/ + +#define dma_cache_inv(_start,_size) do { } while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { } while (0) + + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p +/* + * We don't do relaxed operations yet, at least not with this semantic + */ #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) #define readl_relaxed(addr) readl(addr) #define readq_relaxed(addr) readq(addr) -extern void _insb(volatile u8 __iomem *port, void *buf, long count); -extern void _outsb(volatile u8 __iomem *port, const void *buf, long count); -extern void _insw_ns(volatile u16 __iomem *port, void *buf, long count); -extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, long count); -extern void _insl_ns(volatile u32 __iomem *port, void *buf, long count); -extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, long count); - +/* + * Enforce synchronisation of stores vs. spin_unlock + * (this does it explicitely, though our implementation of spin_unlock + * does it implicitely too) + */ static inline void mmiowb(void) { unsigned long tmp; @@ -170,6 +386,23 @@ static inline void mmiowb(void) : "memory"); } +static inline void iosync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* Enforce in-order execution of data I/O. + * No distinction between read/write on PPC; use eieio for all three. + * Those are fairly week though. They don't provide a barrier between + * MMIO and cacheable storage nor do they provide a barrier vs. locks, + * they only provide barriers between 2 __raw MMIO operations and + * possibly break write combining. + */ +#define iobarrier_rw() eieio() +#define iobarrier_r() eieio() +#define iobarrier_w() eieio() + + /* * output pause versions need a delay at least for the * w83c105 ide controller in a p610. @@ -185,11 +418,6 @@ static inline void mmiowb(void) #define IO_SPACE_LIMIT ~(0UL) -extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr, - unsigned long size, unsigned long flags); -extern void __iomem *__ioremap(unsigned long address, unsigned long size, - unsigned long flags); - /** * ioremap - map bus memory into CPU space * @address: bus address of the memory @@ -200,14 +428,70 @@ extern void __iomem *__ioremap(unsigned long address, unsigned long size, * writew/writel functions and the other mmio helpers. The returned * address is not guaranteed to be usable directly as a virtual * address. + * + * We provide a few variations of it: + * + * * ioremap is the standard one and provides non-cacheable guarded mappings + * and can be hooked by the platform via ppc_md + * + * * ioremap_flags allows to specify the page flags as an argument and can + * also be hooked by the platform via ppc_md + * + * * ioremap_nocache is identical to ioremap + * + * * iounmap undoes such a mapping and can be hooked + * + * * __ioremap_explicit (and the pending __iounmap_explicit) are low level + * functions to create hand-made mappings for use only by the PCI code + * and cannot currently be hooked. + * + * * __ioremap is the low level implementation used by ioremap and + * ioremap_flags and cannot be hooked (but can be used by a hook on one + * of the previous ones) + * + * * __iounmap, is the low level implementation used by iounmap and cannot + * be hooked (but can be used by a hook on iounmap) + * */ extern void __iomem *ioremap(unsigned long address, unsigned long size); - +extern void __iomem *ioremap_flags(unsigned long address, unsigned long size, + unsigned long flags); #define ioremap_nocache(addr, size) ioremap((addr), (size)) -extern int iounmap_explicit(volatile void __iomem *addr, unsigned long size); -extern void iounmap(volatile void __iomem *addr); +extern void iounmap(void __iomem *addr); + +extern void __iomem *__ioremap(unsigned long address, unsigned long size, + unsigned long flags); +extern void __iounmap(void __iomem *addr); + +extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr, + unsigned long size, unsigned long flags); +extern int __iounmap_explicit(void __iomem *start, unsigned long size); + extern void __iomem * reserve_phb_iospace(unsigned long size); + +/* + * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation + * which needs some additional definitions here. They basically allow PIO + * space overall to be 1GB. This will work as long as we never try to use + * iomap to map MMIO below 1GB which should be fine on ppc64 + */ +#define HAVE_ARCH_PIO_SIZE 1 +#define PIO_OFFSET 0x00000000UL +#define PIO_MASK 0x3fffffffUL +#define PIO_RESERVED 0x40000000UL + +#define mmio_read16be(addr) readw_be(addr) +#define mmio_read32be(addr) readl_be(addr) +#define mmio_write16be(val, addr) writew_be(val, addr) +#define mmio_write32be(val, addr) writel_be(val, addr) +#define mmio_insb(addr, dst, count) readsb(addr, dst, count) +#define mmio_insw(addr, dst, count) readsw(addr, dst, count) +#define mmio_insl(addr, dst, count) readsl(addr, dst, count) +#define mmio_outsb(addr, src, count) writesb(addr, src, count) +#define mmio_outsw(addr, src, count) writesw(addr, src, count) +#define mmio_outsl(addr, src, count) writesl(addr, src, count) + /** * virt_to_phys - map virtual addresses to physical * @address: address to remap @@ -254,177 +538,6 @@ static inline void * phys_to_virt(unsigned long address) */ #define BIO_VMERGE_BOUNDARY 0 -static inline void iosync(void) -{ - __asm__ __volatile__ ("sync" : : : "memory"); -} - -/* Enforce in-order execution of data I/O. - * No distinction between read/write on PPC; use eieio for all three. - */ -#define iobarrier_rw() eieio() -#define iobarrier_r() eieio() -#define iobarrier_w() eieio() - -/* - * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. - * These routines do not perform EEH-related I/O address translation, - * and should not be used directly by device drivers. Use inb/readb - * instead. - */ -static inline int __in_8(const volatile unsigned char __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lbz%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_8(volatile unsigned char __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stb%U0%X0 %1,%0" - : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -static inline int __in_le16(const volatile unsigned short __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lhbrx %0,0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "r" (addr), "m" (*addr)); - return ret; -} - -static inline int __in_be16(const volatile unsigned short __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lhz%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_le16(volatile unsigned short __iomem *addr, int val) -{ - __asm__ __volatile__("sync; sthbrx %1,0,%2" - : "=m" (*addr) : "r" (val), "r" (addr)); - get_paca()->io_sync = 1; -} - -static inline void __out_be16(volatile unsigned short __iomem *addr, int val) -{ - __asm__ __volatile__("sync; sth%U0%X0 %1,%0" - : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -static inline unsigned __in_le32(const volatile unsigned __iomem *addr) -{ - unsigned ret; - - __asm__ __volatile__("sync; lwbrx %0,0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "r" (addr), "m" (*addr)); - return ret; -} - -static inline unsigned __in_be32(const volatile unsigned __iomem *addr) -{ - unsigned ret; - - __asm__ __volatile__("sync; lwz%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_le32(volatile unsigned __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) - : "r" (val), "r" (addr)); - get_paca()->io_sync = 1; -} - -static inline void __out_be32(volatile unsigned __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stw%U0%X0 %1,%0" - : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -static inline unsigned long __in_le64(const volatile unsigned long __iomem *addr) -{ - unsigned long tmp, ret; - - __asm__ __volatile__( - "sync\n" - "ld %1,0(%2)\n" - "twi 0,%1,0\n" - "isync\n" - "rldimi %0,%1,5*8,1*8\n" - "rldimi %0,%1,3*8,2*8\n" - "rldimi %0,%1,1*8,3*8\n" - "rldimi %0,%1,7*8,4*8\n" - "rldicl %1,%1,32,0\n" - "rlwimi %0,%1,8,8,31\n" - "rlwimi %0,%1,24,16,23\n" - : "=r" (ret) , "=r" (tmp) : "b" (addr) , "m" (*addr)); - return ret; -} - -static inline unsigned long __in_be64(const volatile unsigned long __iomem *addr) -{ - unsigned long ret; - - __asm__ __volatile__("sync; ld%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_le64(volatile unsigned long __iomem *addr, unsigned long val) -{ - unsigned long tmp; - - __asm__ __volatile__( - "rldimi %0,%1,5*8,1*8\n" - "rldimi %0,%1,3*8,2*8\n" - "rldimi %0,%1,1*8,3*8\n" - "rldimi %0,%1,7*8,4*8\n" - "rldicl %1,%1,32,0\n" - "rlwimi %0,%1,8,8,31\n" - "rlwimi %0,%1,24,16,23\n" - "sync\n" - "std %0,0(%3)" - : "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr)); - get_paca()->io_sync = 1; -} - -static inline void __out_be64(volatile unsigned long __iomem *addr, unsigned long val) -{ - __asm__ __volatile__("sync; std%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -#include - -/* Nothing to do */ - -#define dma_cache_inv(_start,_size) do { } while (0) -#define dma_cache_wback(_start,_size) do { } while (0) -#define dma_cache_wback_inv(_start,_size) do { } while (0) - - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - #endif /* __KERNEL__ */ #endif /* CONFIG_PPC64 */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 23580cf5504..8c1a2dfe5cc 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -87,6 +87,10 @@ struct machdep_calls { void (*tce_flush)(struct iommu_table *tbl); void (*pci_dma_dev_setup)(struct pci_dev *dev); void (*pci_dma_bus_setup)(struct pci_bus *bus); + + void __iomem * (*ioremap)(unsigned long addr, unsigned long size, + unsigned long flags); + void (*iounmap)(void __iomem *token); #endif /* CONFIG_PPC64 */ int (*probe)(void); diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index b744baf9e20..bfb639f9e42 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -321,12 +321,12 @@ __do_out_asm(outl, "stwbrx") #define inl_p(port) inl((port)) #define outl_p(val, port) outl((val), (port)) -extern void _insb(volatile u8 __iomem *port, void *buf, long count); -extern void _outsb(volatile u8 __iomem *port, const void *buf, long count); -extern void _insw_ns(volatile u16 __iomem *port, void *buf, long count); -extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, long count); -extern void _insl_ns(volatile u32 __iomem *port, void *buf, long count); -extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, long count); +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); #define IO_SPACE_LIMIT ~0 -- cgit v1.2.3 From 92b20c40dcca2d441f367da57e7665cce15c492a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:14 +1100 Subject: [POWERPC] Add an optional offset to direct DMA on 64 bits This patch adds an optional global offset that can be added to DMA addresses when using the direct DMA operations. That brings it a step closer to the 32 bits direct DMA operations, and makes it useable on Cell when the MMU is disabled and we are using a spider southbridge. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/dma-mapping.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 8367810c994..7e38b5fddad 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -187,6 +187,8 @@ static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, extern struct dma_mapping_ops dma_iommu_ops; extern struct dma_mapping_ops dma_direct_ops; +extern unsigned long dma_direct_offset; + #else /* CONFIG_PPC64 */ #define dma_supported(dev, mask) (1) -- cgit v1.2.3 From 165785e5c0be3ad43e8b8eadfbd25e92c2cd002a Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Sat, 11 Nov 2006 17:25:18 +1100 Subject: [POWERPC] Cell iommu support This patch adds full cell iommu support (and iommu disabled mode). It implements mapping/unmapping of iommu pages on demand using the standard powerpc iommu framework. It also supports running with iommu disabled for machines with less than 2GB of memory. (The default is off in that case, though it can be forced on with the kernel command line option iommu=force). Signed-off-by: Jeremy Kerr Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/iommu.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index 19403183dbb..f85dbd30555 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -34,7 +34,9 @@ #define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) -#ifndef __ASSEMBLY__ +/* Boot time flags */ +extern int iommu_is_off; +extern int iommu_force_on; /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) @@ -42,8 +44,6 @@ static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1; } -#endif /* __ASSEMBLY__ */ - /* * IOMAP_MAX_ORDER defines the largest contiguous block -- cgit v1.2.3 From 68a64357d15ae4f596e92715719071952006e83c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 13 Nov 2006 09:27:39 +1100 Subject: [POWERPC] Merge 32 and 64 bits asm-powerpc/io.h powerpc: Merge 32 and 64 bits asm-powerpc/io.h The rework on io.h done for the new hookable accessors made it easier, so I just finished the work and merged 32 and 64 bits io.h for arch/powerpc. arch/ppc still uses the old version in asm-ppc, there is just too much gunk in there that I really can't be bothered trying to cleanup. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/eeh.h | 95 +------------- include/asm-powerpc/ide.h | 7 -- include/asm-powerpc/io-defs.h | 9 +- include/asm-powerpc/io.h | 286 +++++++++++++++++++++++++++++++++++------- include/asm-powerpc/machdep.h | 4 +- 5 files changed, 254 insertions(+), 147 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 66481bbf270..b886bec6701 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -169,104 +169,19 @@ static inline u64 eeh_readq_be(const volatile void __iomem *addr) return val; } -#define EEH_CHECK_ALIGN(v,a) \ - ((((unsigned long)(v)) & ((a) - 1)) == 0) - -static inline void eeh_memset_io(volatile void __iomem *addr, int c, - unsigned long n) -{ - void *p = (void __force *)addr; - u32 lc = c; - lc |= lc << 8; - lc |= lc << 16; - - __asm__ __volatile__ ("sync" : : : "memory"); - while(n && !EEH_CHECK_ALIGN(p, 4)) { - *((volatile u8 *)p) = c; - p++; - n--; - } - while(n >= 4) { - *((volatile u32 *)p) = lc; - p += 4; - n -= 4; - } - while(n) { - *((volatile u8 *)p) = c; - p++; - n--; - } - __asm__ __volatile__ ("sync" : : : "memory"); -} -static inline void eeh_memcpy_fromio(void *dest, const volatile void __iomem *src, +static inline void eeh_memcpy_fromio(void *dest, const + volatile void __iomem *src, unsigned long n) { - void *vsrc = (void __force *) src; - void *destsave = dest; - unsigned long nsave = n; - - __asm__ __volatile__ ("sync" : : : "memory"); - while(n && (!EEH_CHECK_ALIGN(vsrc, 4) || !EEH_CHECK_ALIGN(dest, 4))) { - *((u8 *)dest) = *((volatile u8 *)vsrc); - __asm__ __volatile__ ("eieio" : : : "memory"); - vsrc++; - dest++; - n--; - } - while(n > 4) { - *((u32 *)dest) = *((volatile u32 *)vsrc); - __asm__ __volatile__ ("eieio" : : : "memory"); - vsrc += 4; - dest += 4; - n -= 4; - } - while(n) { - *((u8 *)dest) = *((volatile u8 *)vsrc); - __asm__ __volatile__ ("eieio" : : : "memory"); - vsrc++; - dest++; - n--; - } - __asm__ __volatile__ ("sync" : : : "memory"); + _memcpy_fromio(dest, src, n); /* Look for ffff's here at dest[n]. Assume that at least 4 bytes * were copied. Check all four bytes. */ - if ((nsave >= 4) && - (EEH_POSSIBLE_ERROR((*((u32 *) destsave+nsave-4)), u32))) { - eeh_check_failure(src, (*((u32 *) destsave+nsave-4))); - } + if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32)) + eeh_check_failure(src, *((u32 *)(dest + n - 4))); } -static inline void eeh_memcpy_toio(volatile void __iomem *dest, const void *src, - unsigned long n) -{ - void *vdest = (void __force *) dest; - - __asm__ __volatile__ ("sync" : : : "memory"); - while(n && (!EEH_CHECK_ALIGN(vdest, 4) || !EEH_CHECK_ALIGN(src, 4))) { - *((volatile u8 *)vdest) = *((u8 *)src); - src++; - vdest++; - n--; - } - while(n > 4) { - *((volatile u32 *)vdest) = *((volatile u32 *)src); - src += 4; - vdest += 4; - n-=4; - } - while(n) { - *((volatile u8 *)vdest) = *((u8 *)src); - src++; - vdest++; - n--; - } - __asm__ __volatile__ ("sync" : : : "memory"); -} - -#undef EEH_CHECK_ALIGN - /* in-string eeh macros */ static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, int ns) diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index 60a8fc42997..0f66f0f82c3 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -22,17 +22,10 @@ #endif #endif -#ifdef __powerpc64__ #define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) #define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) #define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) #define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) -#else -#define __ide_mm_insw(p, a, c) _insw_ns((volatile u16 __iomem *)(p), (a), (c)) -#define __ide_mm_insl(p, a, c) _insl_ns((volatile u32 __iomem *)(p), (a), (c)) -#define __ide_mm_outsw(p, a, c) _outsw_ns((volatile u16 __iomem *)(p), (a), (c)) -#define __ide_mm_outsl(p, a, c) _outsl_ns((volatile u32 __iomem *)(p), (a), (c)) -#endif #ifndef __powerpc64__ #include diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h index 5a660f1130d..03691ab6921 100644 --- a/include/asm-powerpc/io-defs.h +++ b/include/asm-powerpc/io-defs.h @@ -3,17 +3,20 @@ DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr)) -DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr)) -DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr)) -DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr)) + +#ifdef __powerpc64__ +DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr)) +#endif /* __powerpc64__ */ DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port)) DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port)) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 03e843fc143..53bff8bd39b 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -13,24 +13,51 @@ extern int check_legacy_ioport(unsigned long base_port); #define PNPBIOS_BASE 0xf000 /* only relevant for PReP */ -#ifndef CONFIG_PPC64 -#include -#else - #include #include #include -#include #include #include +#include #include +#ifdef CONFIG_PPC64 +#include +#endif + #define SIO_CONFIG_RA 0x398 #define SIO_CONFIG_RD 0x399 #define SLOW_DOWN_IO +/* 32 bits uses slightly different variables for the various IO + * bases. Most of this file only uses _IO_BASE though which we + * define properly based on the platform + */ +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#elif defined(CONFIG_PPC32) +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define _IO_BASE pci_io_base +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#endif + +extern unsigned long isa_io_base; +extern unsigned long isa_mem_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO) +#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits +#endif + /* * * Low level MMIO accessors @@ -53,7 +80,11 @@ extern int check_legacy_ioport(unsigned long base_port); * */ +#ifdef CONFIG_PPC64 #define IO_SET_SYNC_FLAG() do { get_paca()->io_sync = 1; } while(0) +#else +#define IO_SET_SYNC_FLAG() +#endif #define DEF_MMIO_IN(name, type, insn) \ static inline type name(const volatile type __iomem *addr) \ @@ -86,17 +117,19 @@ static inline void name(volatile type __iomem *addr, type val) \ DEF_MMIO_IN_BE(in_8, 8, lbz); DEF_MMIO_IN_BE(in_be16, 16, lhz); DEF_MMIO_IN_BE(in_be32, 32, lwz); -DEF_MMIO_IN_BE(in_be64, 64, ld); DEF_MMIO_IN_LE(in_le16, 16, lhbrx); DEF_MMIO_IN_LE(in_le32, 32, lwbrx); DEF_MMIO_OUT_BE(out_8, 8, stb); DEF_MMIO_OUT_BE(out_be16, 16, sth); DEF_MMIO_OUT_BE(out_be32, 32, stw); -DEF_MMIO_OUT_BE(out_be64, 64, std); DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); +#ifdef __powerpc64__ +DEF_MMIO_OUT_BE(out_be64, 64, std); +DEF_MMIO_IN_BE(in_be64, 64, ld); + /* There is no asm instructions for 64 bits reverse loads and stores */ static inline u64 in_le64(const volatile u64 __iomem *addr) { @@ -107,6 +140,7 @@ static inline void out_le64(volatile u64 __iomem *addr, u64 val) { out_be64(addr, cpu_to_le64(val)); } +#endif /* __powerpc64__ */ /* * Low level IO stream instructions are defined out of line for now @@ -126,6 +160,17 @@ extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); #define _outsw _outsw_ns #define _outsl _outsl_ns + +/* + * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line + */ + +extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); +extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n); +extern void _memcpy_toio(volatile void __iomem *dest, const void *src, + unsigned long n); + /* * * PCI and standard ISA accessors @@ -140,9 +185,6 @@ extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); * of the accessors. */ -extern unsigned long isa_io_base; -extern unsigned long pci_io_base; - /* * Non ordered and non-swapping "raw" accessors @@ -160,10 +202,6 @@ static inline unsigned int __raw_readl(const volatile void __iomem *addr) { return *(volatile unsigned int __force *)addr; } -static inline unsigned long __raw_readq(const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *)addr; -} static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) { *(volatile unsigned char __force *)addr = v; @@ -176,11 +214,17 @@ static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) { *(volatile unsigned int __force *)addr = v; } + +#ifdef __powerpc64__ +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)addr; +} static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) { *(volatile unsigned long __force *)addr = v; } - +#endif /* __powerpc64__ */ /* * @@ -188,7 +232,13 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) * */ +/* + * Include the EEH definitions when EEH is enabled only so they don't get + * in the way when building for 32 bits + */ +#ifdef CONFIG_EEH #include +#endif /* Shortcut to the MMIO argument pointer */ #define PCI_IO_ADDR volatile void __iomem * @@ -196,7 +246,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) /* Indirect IO address tokens: * * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks - * on all IOs. + * on all IOs. (Note that this is all 64 bits only for now) * * To help platforms who may need to differenciate MMIO addresses in * their hooks, a bitfield is reserved for use by the platform near the @@ -241,6 +291,70 @@ do { \ #define PCI_FIX_ADDR(addr) (addr) #endif +/* + * On 32 bits, PIO operations have a recovery mechanism in case they trigger + * machine checks (which they occasionally do when probing non existing + * IO ports on some platforms, like PowerMac and 8xx). + * I always found it to be of dubious reliability and I am tempted to get + * rid of it one of these days. So if you think it's important to keep it, + * please voice up asap. We never had it for 64 bits and I do not intend + * to port it over + */ + +#ifdef CONFIG_PPC32 + +#define __do_in_asm(name, op) \ +extern __inline__ unsigned int name(unsigned int port) \ +{ \ + unsigned int x; \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: twi 0,%0,0\n" \ + "2: isync\n" \ + "3: nop\n" \ + "4:\n" \ + ".section .fixup,\"ax\"\n" \ + "5: li %0,-1\n" \ + " b 4b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,5b\n" \ + " .long 1b,5b\n" \ + " .long 2b,5b\n" \ + " .long 3b,5b\n" \ + ".previous" \ + : "=&r" (x) \ + : "r" (port + _IO_BASE)); \ + return x; \ +} + +#define __do_out_asm(name, op) \ +extern __inline__ void name(unsigned int val, unsigned int port) \ +{ \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: sync\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,2b\n" \ + " .long 1b,2b\n" \ + ".previous" \ + : : "r" (val), "r" (port + _IO_BASE)); \ +} + +__do_in_asm(_rec_inb, "lbzx") +__do_in_asm(_rec_inw, "lhbrx") +__do_in_asm(_rec_inl, "lwbrx") +__do_out_asm(_rec_outb, "stbx") +__do_out_asm(_rec_outw, "sthbrx") +__do_out_asm(_rec_outl, "stwbrx") + +#endif /* CONFIG_PPC32 */ + /* The "__do_*" operations below provide the actual "base" implementation * for each of the defined acccessor. Some of them use the out_* functions * directly, some of them still use EEH, though we might change that in the @@ -263,6 +377,8 @@ do { \ #define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) #define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) #define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) + +#ifdef CONFIG_EEH #define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) #define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) #define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) @@ -270,33 +386,64 @@ do { \ #define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) #define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) #define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) - -#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)pci_io_base+port); -#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)pci_io_base+port); -#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)pci_io_base+port); -#define __do_inb(port) readb((PCI_IO_ADDR)pci_io_base + port); -#define __do_inw(port) readw((PCI_IO_ADDR)pci_io_base + port); -#define __do_inl(port) readl((PCI_IO_ADDR)pci_io_base + port); - +#else /* CONFIG_EEH */ +#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) +#endif /* !defined(CONFIG_EEH) */ + +#ifdef CONFIG_PPC32 +#define __do_outb(val, port) _rec_outb(val, port) +#define __do_outw(val, port) _rec_outw(val, port) +#define __do_outl(val, port) _rec_outl(val, port) +#define __do_inb(port) _rec_inb(port) +#define __do_inw(port) _rec_inw(port) +#define __do_inl(port) _rec_inl(port) +#else /* CONFIG_PPC32 */ +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); +#endif /* !CONFIG_PPC32 */ + +#ifdef CONFIG_EEH #define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) #define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) #define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#else /* CONFIG_EEH */ +#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) +#endif /* !CONFIG_EEH */ #define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) #define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) #define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) -#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) -#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) -#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) -#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) -#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) -#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) - -#define __do_memset_io(addr, c, n) eeh_memset_io(PCI_FIX_ADDR(addr), c, n) -#define __do_memcpy_fromio(dst, src, n) eeh_memcpy_fromio(dst, \ - PCI_FIX_ADDR(src), n) -#define __do_memcpy_toio(dst, src, n) eeh_memcpy_toio(PCI_FIX_ADDR(dst), \ - src, n) +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) \ + _memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_toio(dst, src, n) \ + _memcpy_toio(PCI_FIX_ADDR(dst), src, n) + +#ifdef CONFIG_EEH +#define __do_memcpy_fromio(dst, src, n) \ + eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) +#else /* CONFIG_EEH */ +#define __do_memcpy_fromio(dst, src, n) \ + _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) +#endif /* !CONFIG_EEH */ #ifdef CONFIG_PPC_INDIRECT_IO #define DEF_PCI_HOOK(x) x @@ -343,15 +490,27 @@ static inline void name at \ /* Some drivers check for the presence of readq & writeq with * a #ifdef, so we make them happy here. */ +#ifdef __powerpc64__ #define readq readq #define writeq writeq +#endif + +#ifdef CONFIG_NOT_COHERENT_CACHE -/* Nothing to do for cache stuff x*/ +#define dma_cache_inv(_start,_size) \ + invalidate_dcache_range(_start, (_start + _size)) +#define dma_cache_wback(_start,_size) \ + clean_dcache_range(_start, (_start + _size)) +#define dma_cache_wback_inv(_start,_size) \ + flush_dcache_range(_start, (_start + _size)) + +#else /* CONFIG_NOT_COHERENT_CACHE */ #define dma_cache_inv(_start,_size) do { } while (0) #define dma_cache_wback(_start,_size) do { } while (0) #define dma_cache_wback_inv(_start,_size) do { } while (0) +#endif /* !CONFIG_NOT_COHERENT_CACHE */ /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem @@ -372,6 +531,9 @@ static inline void name at \ #define readl_relaxed(addr) readl(addr) #define readq_relaxed(addr) readq(addr) +#ifdef CONFIG_PPC32 +#define mmiowb() +#else /* * Enforce synchronisation of stores vs. spin_unlock * (this does it explicitely, though our implementation of spin_unlock @@ -385,6 +547,7 @@ static inline void mmiowb(void) : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync)) : "memory"); } +#endif /* !CONFIG_PPC32 */ static inline void iosync(void) { @@ -453,22 +616,29 @@ static inline void iosync(void) * be hooked (but can be used by a hook on iounmap) * */ -extern void __iomem *ioremap(unsigned long address, unsigned long size); -extern void __iomem *ioremap_flags(unsigned long address, unsigned long size, +extern void __iomem *ioremap(phys_addr_t address, unsigned long size); +extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, unsigned long flags); #define ioremap_nocache(addr, size) ioremap((addr), (size)) -extern void iounmap(void __iomem *addr); +extern void iounmap(volatile void __iomem *addr); -extern void __iomem *__ioremap(unsigned long address, unsigned long size, +extern void __iomem *__ioremap(phys_addr_t, unsigned long size, unsigned long flags); -extern void __iounmap(void __iomem *addr); +extern void __iounmap(volatile void __iomem *addr); -extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr, +extern int __ioremap_explicit(phys_addr_t p_addr, unsigned long v_addr, unsigned long size, unsigned long flags); -extern int __iounmap_explicit(void __iomem *start, unsigned long size); +extern int __iounmap_explicit(volatile void __iomem *start, + unsigned long size); extern void __iomem * reserve_phb_iospace(unsigned long size); +/* Those are more 32 bits only functions */ +extern unsigned long iopa(unsigned long addr); +extern unsigned long mm_ptov(unsigned long addr) __attribute_const__; +extern void io_block_mapping(unsigned long virt, phys_addr_t phys, + unsigned int size, int flags); + /* * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation @@ -538,7 +708,33 @@ static inline void * phys_to_virt(unsigned long address) */ #define BIO_VMERGE_BOUNDARY 0 +/* + * 32 bits still uses virt_to_bus() for it's implementation of DMA + * mappings se we have to keep it defined here. We also have some old + * drivers (shame shame shame) that use bus_to_virt() and haven't been + * fixed yet so I need to define it here. + */ +#ifdef CONFIG_PPC32 + +static inline unsigned long virt_to_bus(volatile void * address) +{ + if (address == NULL) + return 0; + return __pa(address) + PCI_DRAM_OFFSET; +} + +static inline void * bus_to_virt(unsigned long address) +{ + if (address == 0) + return NULL; + return __va(address - PCI_DRAM_OFFSET); +} + +#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) + +#endif /* CONFIG_PPC32 */ + + #endif /* __KERNEL__ */ -#endif /* CONFIG_PPC64 */ #endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 8c1a2dfe5cc..1b04e572354 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -88,9 +88,9 @@ struct machdep_calls { void (*pci_dma_dev_setup)(struct pci_dev *dev); void (*pci_dma_bus_setup)(struct pci_bus *bus); - void __iomem * (*ioremap)(unsigned long addr, unsigned long size, + void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, unsigned long flags); - void (*iounmap)(void __iomem *token); + void (*iounmap)(volatile void __iomem *token); #endif /* CONFIG_PPC64 */ int (*probe)(void); -- cgit v1.2.3 From 757db1ed9b50d28cd4c1e7d9925c9ea7783b2f91 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 Nov 2006 12:35:29 +1100 Subject: [POWERPC] Fix __raw* accessors The new IO accessor code allows to stick a token in the top bit of MMIO addresses which gets masked out during actual accesses. However, the __raw_* accessors forgot to mask it out. This fixes it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/io.h | 92 +++++++++++++++++++++++------------------------- 1 file changed, 45 insertions(+), 47 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 53bff8bd39b..75df3bce9cc 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -185,53 +185,6 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src, * of the accessors. */ - -/* - * Non ordered and non-swapping "raw" accessors - */ - -static inline unsigned char __raw_readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} -static inline unsigned short __raw_readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} -static inline unsigned int __raw_readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *)addr; -} -static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)addr = v; -} -static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)addr = v; -} -static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)addr = v; -} - -#ifdef __powerpc64__ -static inline unsigned long __raw_readq(const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *)addr; -} -static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) -{ - *(volatile unsigned long __force *)addr = v; -} -#endif /* __powerpc64__ */ - -/* - * - * PCI PIO and MMIO accessors. - * - */ - /* * Include the EEH definitions when EEH is enabled only so they don't get * in the way when building for 32 bits @@ -291,7 +244,52 @@ do { \ #define PCI_FIX_ADDR(addr) (addr) #endif + +/* + * Non ordered and non-swapping "raw" accessors + */ + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v; +} + +#ifdef __powerpc64__ +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) +{ + *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v; +} +#endif /* __powerpc64__ */ + /* + * + * PCI PIO and MMIO accessors. + * + * * On 32 bits, PIO operations have a recovery mechanism in case they trigger * machine checks (which they occasionally do when probing non existing * IO ports on some platforms, like PowerMac and 8xx). -- cgit v1.2.3 From 6ad4e70cafc43155d3a7e6e796e8b6b6967fc9e2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 Nov 2006 13:45:56 +1100 Subject: [POWERPC] Fix IDE build with ARCH=ppc The recent IO accessor changes broke IDE on arch/ppc due to the IDE stream IO macros using the new reads/writes{b,w,l} accessors that are only defined for arch/powerpc. This adds them to arch/ppc. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-ppc/io.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index bfb639f9e42..ccf1a9bb2e4 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -231,6 +231,14 @@ static inline void __raw_writel(__u32 b, volatile void __iomem *addr) #define insl(port, buf, nl) _insl_ns((port)+___IO_BASE, (buf), (nl)) #define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl)) +#define readsb(a, b, n) _insb((a), (b), (n)) +#define readsw(a, b, n) _insw_ns((a), (b), (n)) +#define readsl(a, b, n) _insl_ns((a), (b), (n)) +#define writesb(a, b, n) _outsb((a),(b),(n)) +#define writesw(a, b, n) _outsw_ns((a),(b),(n)) +#define writesl(a, b, n) _outsl_ns((a),(b),(n)) + + /* * On powermacs and 8xx we will get a machine check exception * if we try to read data from a non-existent I/O port. Because -- cgit v1.2.3 From ef2b343e99e772e35f0f9d00f7db318b6629c16e Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 10 Nov 2006 21:32:40 +0000 Subject: [POWERPC] Make soft_enabled irqs preempt safe Rewrite local_get_flags and local_irq_disable to use r13 explicitly, to avoid the risk that gcc will split get_paca()->soft_enabled into a sequence unsafe against preemption. Similar care in local_irq_restore. Signed-off-by: Hugh Dickins Signed-off-by: Paul Mackerras --- include/asm-powerpc/hw_irq.h | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index c4a1ab608f6..fd3f2a20627 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -18,15 +18,25 @@ extern void timer_interrupt(struct pt_regs *); static inline unsigned long local_get_flags(void) { - return get_paca()->soft_enabled; + unsigned long flags; + + __asm__ __volatile__("lbz %0,%1(13)" + : "=r" (flags) + : "i" (offsetof(struct paca_struct, soft_enabled))); + + return flags; } static inline unsigned long local_irq_disable(void) { - unsigned long flag = get_paca()->soft_enabled; - get_paca()->soft_enabled = 0; - barrier(); - return flag; + unsigned long flags, zero; + + __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)" + : "=r" (flags), "=&r" (zero) + : "i" (offsetof(struct paca_struct, soft_enabled)) + : "memory"); + + return flags; } extern void local_irq_restore(unsigned long); -- cgit v1.2.3 From 088df4d256227b3d927bb6ed57e66d138da0565c Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 16 Nov 2006 15:41:15 -0600 Subject: [POWERPC] Wrap cpu_die() with CONFIG_HOTPLUG_CPU Per email discussion, it appears that rtas_stop_self() and pSeries_mach_cpu_die() should not be compiled if CONFIG_HOTPLUG_CPU is not defined. This patch adds #ifdefs around these bits of code. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- include/asm-powerpc/rtas.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index d34f9e1f242..5a0c136c041 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -54,8 +54,6 @@ struct rtas_args { rtas_arg_t *rets; /* Pointer to return values in args[]. */ }; -extern struct rtas_args rtas_stop_self_args; - struct rtas_t { unsigned long entry; /* physical address pointer */ unsigned long base; /* physical address pointer */ -- cgit v1.2.3 From 3e00a5aec3d6af687e37f4e7482f5c7ecdcabd0b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 16 Nov 2006 14:03:33 +1100 Subject: [POWERPC] Xserve cpu-meter driver This is a small driver for the Xserve G5 CPU-meter blue LEDs on the front-panel. It might work on the Xserve G4 as well though that was not tested. It's pretty basic and could use some improvements if somebody cares doing them. :) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/dbdma.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/dbdma.h b/include/asm-powerpc/dbdma.h index 8973565f95d..e23f07e73cb 100644 --- a/include/asm-powerpc/dbdma.h +++ b/include/asm-powerpc/dbdma.h @@ -95,7 +95,13 @@ struct dbdma_cmd { #define DBDMA_DO_STOP(regs) do { \ out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ - ; \ + ; \ +} while(0) + +#define DBDMA_DO_RESET(regs) do { \ + out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\ + while(in_le32(&((regs)->status)) & (RUN)) \ + ; \ } while(0) #endif /* _ASM_DBDMA_H_ */ -- cgit v1.2.3 From 8dc86ab954d28513f75918d743c40cddbff7388a Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Mon, 20 Nov 2006 18:44:56 +0100 Subject: [POWERPC] Change ppc_rtas declaration to weak Change the definition of powerpc's cond_syscall() to use the standard gcc weak attribute specifier which provides proper support for C linkage as needed by spu_syscall_table[]. Fixes this powerpc build error with CONFIG_SPU_FS=y, CONFIG_PPC_RTAS=n: arch/powerpc/platforms/built-in.o: undefined reference to `ppc_rtas' Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/unistd.h | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h index 0e4ea37f646..04b6c17cc59 100644 --- a/include/asm-powerpc/unistd.h +++ b/include/asm-powerpc/unistd.h @@ -446,7 +446,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6 #include #include #include -#include #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR @@ -481,16 +480,9 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6 /* * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand */ -#ifdef CONFIG_PPC32 -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#else -#define cond_syscall(x) asm(".weak\t." #x "\n\t.set\t." #x ",.sys_ni_syscall") -#endif - +#define cond_syscall(x) \ + asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall"))) #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ -- cgit v1.2.3 From b9e3bd774bb1a90fee9b90f461a51e4ba295fe6d Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Mon, 20 Nov 2006 18:44:58 +0100 Subject: [POWERPC] spufs: Add /lslr, /dma_info and /proxydma files The /lslr file gives read access to the SPU_LSLR register in hex; 0x3fff for example The /dma_info file provides read access to the SPU Command Queue in a binary format. The /proxydma_info files provides read access access to the Proxy Command Queue in a binary format. The spu_info.h file provides data structures for interpreting the binary format of /dma_info and /proxydma_info. Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/Kbuild | 1 + include/asm-powerpc/spu_info.h | 54 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) create mode 100644 include/asm-powerpc/spu_info.h (limited to 'include') diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 9827849953a..1e637381c11 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -17,6 +17,7 @@ header-y += ipc.h header-y += poll.h header-y += shmparam.h header-y += sockios.h +header-y += spu_info.h header-y += ucontext.h header-y += ioctl.h header-y += linkage.h diff --git a/include/asm-powerpc/spu_info.h b/include/asm-powerpc/spu_info.h new file mode 100644 index 00000000000..3545efbf989 --- /dev/null +++ b/include/asm-powerpc/spu_info.h @@ -0,0 +1,54 @@ +/* + * SPU info structures + * + * (C) Copyright 2006 IBM Corp. + * + * Author: Dwayne Grant McConnell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_INFO_H +#define _SPU_INFO_H + +#ifdef __KERNEL__ +#include +#include +#else +struct mfc_cq_sr { + __u64 mfc_cq_data0_RW; + __u64 mfc_cq_data1_RW; + __u64 mfc_cq_data2_RW; + __u64 mfc_cq_data3_RW; +}; +#endif /* __KERNEL__ */ + +struct spu_dma_info { + __u64 dma_info_type; + __u64 dma_info_mask; + __u64 dma_info_status; + __u64 dma_info_stall_and_notify; + __u64 dma_info_atomic_command_status; + struct mfc_cq_sr dma_info_command_data[16]; +}; + +struct spu_proxydma_info { + __u64 proxydma_info_type; + __u64 proxydma_info_mask; + __u64 proxydma_info_status; + struct mfc_cq_sr proxydma_info_command_data[8]; +}; + +#endif -- cgit v1.2.3 From e4f6948cfc8b9626022db0f93e7cf2ce5c0998cd Mon Sep 17 00:00:00 2001 From: Kevin Corry Date: Mon, 20 Nov 2006 18:45:14 +0100 Subject: [POWERPC] cell: Move PMU-related stuff to include/asm-powerpc/cell-pmu.h Move some PMU-related macros and function prototypes from cbe_regs.h and pmu.h in arch/powerpc/platforms/cell/ to a new header at include/asm-powerpc/cell-pmu.h This is cleaner to use from the oprofile code, since that sits in arch/powerpc/oprofile, not in the cell platform directory. Signed-off-by: Kevin Corry Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/cell-pmu.h | 90 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 include/asm-powerpc/cell-pmu.h (limited to 'include') diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h new file mode 100644 index 00000000000..c416fe30dee --- /dev/null +++ b/include/asm-powerpc/cell-pmu.h @@ -0,0 +1,90 @@ +/* + * Cell Broadband Engine Performance Monitor + * + * (C) Copyright IBM Corporation 2006 + * + * Author: + * David Erb (djerb@us.ibm.com) + * Kevin Corry (kevcorry@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_CELL_PMU_H__ +#define __ASM_CELL_PMU_H__ + +/* The Cell PMU has four hardware performance counters, which can be + * configured as four 32-bit counters or eight 16-bit counters. + */ +#define NR_PHYS_CTRS 4 +#define NR_CTRS (NR_PHYS_CTRS * 2) + +/* Macros for the pm_control register. */ +#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) +#define CBE_PM_ENABLE_PERF_MON 0x80000000 +#define CBE_PM_STOP_AT_MAX 0x40000000 +#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) +#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) +#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) +#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 +#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 + +/* Macros for the trace_address register. */ +#define CBE_PM_TRACE_BUF_FULL 0x00000800 +#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 +#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) +#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 + +/* Macros for the pm07_control registers. */ +#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) +#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 +#define CBE_PM_CTR_POLARITY 0x01000000 +#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 +#define CBE_PM_CTR_ENABLE 0x00400000 + +/* Macros for the pm_status register. */ +#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) + +enum pm_reg_name { + group_control, + debug_bus_control, + trace_address, + ext_tr_timer, + pm_status, + pm_control, + pm_interval, + pm_start_stop, +}; + +/* Routines for reading/writing the PMU registers. */ +extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); +extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +extern u32 cbe_read_ctr(u32 cpu, u32 ctr); +extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); + +extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); +extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); +extern u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg); +extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); +extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +extern void cbe_enable_pm(u32 cpu); +extern void cbe_disable_pm(u32 cpu); + +extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); + +#endif /* __ASM_CELL_PMU_H__ */ -- cgit v1.2.3 From 0443bbd3d8496f9c2bc3e8c9d1833c6638722743 Mon Sep 17 00:00:00 2001 From: Kevin Corry Date: Mon, 20 Nov 2006 18:45:15 +0100 Subject: [POWERPC] cell: Add routines for managing PMU interrupts The following routines are added to arch/powerpc/platforms/cell/pmu.c: cbe_clear_pm_interrupts() cbe_enable_pm_interrupts() cbe_disable_pm_interrupts() cbe_query_pm_interrupts() cbe_pm_irq() cbe_init_pm_irq() This also adds a routine in arch/powerpc/platforms/cell/interrupt.c and some macros in cbe_regs.h to manipulate the IIC_IR register: iic_set_interrupt_routing() Signed-off-by: Kevin Corry Signed-off-by: Carl Love Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/cell-pmu.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h index c416fe30dee..63037c352fd 100644 --- a/include/asm-powerpc/cell-pmu.h +++ b/include/asm-powerpc/cell-pmu.h @@ -87,4 +87,9 @@ extern void cbe_disable_pm(u32 cpu); extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); +extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +extern void cbe_disable_pm_interrupts(u32 cpu); +extern u32 cbe_query_pm_interrupts(u32 cpu); +extern u32 cbe_clear_pm_interrupts(u32 cpu); + #endif /* __ASM_CELL_PMU_H__ */ -- cgit v1.2.3 From 18f2190d796198fbb5d4bc4c87511acf3ced7d47 Mon Sep 17 00:00:00 2001 From: Maynard Johnson Date: Mon, 20 Nov 2006 18:45:16 +0100 Subject: [POWERPC] cell: Add oprofile support Add PPU event-based and cycle-based profiling support to Oprofile for Cell. Oprofile is expected to collect data on all CPUs simultaneously. However, there is one set of performance counters per node. There are two hardware threads or virtual CPUs on each node. Hence, OProfile must multiplex in time the performance counter collection on the two virtual CPUs. The multiplexing of the performance counters is done by a virtual counter routine. Initially, the counters are configured to collect data on the even CPUs in the system, one CPU per node. In order to capture the PC for the virtual CPU when the performance counter interrupt occurs (the specified number of events between samples has occurred), the even processors are configured to handle the performance counter interrupts for their node. The virtual counter routine is called via a kernel timer after the virtual sample time. The routine stops the counters, saves the current counts, loads the last counts for the other virtual CPU on the node, sets interrupts to be handled by the other virtual CPU and restarts the counters, the virtual timer routine is scheduled to run again. The virtual sample time is kept relatively small to make sure sampling occurs on both CPUs on the node with a relatively small granularity. Whenever the counters overflow, the performance counter interrupt is called to collect the PC for the CPU where data is being collected. The oprofile driver relies on a firmware RTAS call to setup the debug bus to route the desired signals to the performance counter hardware to be counted. The RTAS call must set the routing registers appropriately in each of the islands to pass the signals down the debug bus as well as routing the signals from a particular island onto the bus. There is a second firmware RTAS call to reset the debug bus to the non pass thru state when the counters are not in use. Signed-off-by: Carl Love Signed-off-by: Maynard Johnson Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/cell-pmu.h | 18 ++++++++++++++++++ include/asm-powerpc/cputable.h | 1 + include/asm-powerpc/oprofile_impl.h | 3 +++ 3 files changed, 22 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h index 63037c352fd..e8c2ebd3ddd 100644 --- a/include/asm-powerpc/cell-pmu.h +++ b/include/asm-powerpc/cell-pmu.h @@ -91,5 +91,23 @@ extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); extern void cbe_disable_pm_interrupts(u32 cpu); extern u32 cbe_query_pm_interrupts(u32 cpu); extern u32 cbe_clear_pm_interrupts(u32 cpu); +extern void cbe_sync_irq(int node); + +/* Utility functions, macros */ +extern u32 cbe_get_hw_thread_id(int cpu); + +#define cbe_cpu_to_node(cpu) ((cpu) >> 1) + +#define CBE_COUNT_SUPERVISOR_MODE 0 +#define CBE_COUNT_HYPERVISOR_MODE 1 +#define CBE_COUNT_PROBLEM_MODE 2 +#define CBE_COUNT_ALL_MODES 3 + +/* Macros for the pm07_control registers. */ +#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) +#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) +#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) +#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) +#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) #endif /* __ASM_CELL_PMU_H__ */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index a9a40149a7c..762d15e4887 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -45,6 +45,7 @@ enum powerpc_oprofile_type { PPC_OPROFILE_POWER4 = 2, PPC_OPROFILE_G4 = 3, PPC_OPROFILE_BOOKE = 4, + PPC_OPROFILE_CELL = 5, }; struct cpu_spec { diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h index 07a10e590c1..71043bf3641 100644 --- a/include/asm-powerpc/oprofile_impl.h +++ b/include/asm-powerpc/oprofile_impl.h @@ -44,7 +44,9 @@ struct op_powerpc_model { int num_counters); void (*cpu_setup) (struct op_counter_config *); void (*start) (struct op_counter_config *); + void (*global_start) (struct op_counter_config *); void (*stop) (void); + void (*global_stop) (void); void (*handle_interrupt) (struct pt_regs *, struct op_counter_config *); int num_counters; @@ -54,6 +56,7 @@ extern struct op_powerpc_model op_model_fsl_booke; extern struct op_powerpc_model op_model_rs64; extern struct op_powerpc_model op_model_power4; extern struct op_powerpc_model op_model_7450; +extern struct op_powerpc_model op_model_cell; #ifndef CONFIG_FSL_BOOKE -- cgit v1.2.3 From 974a76f51355d22f4f63d83d6bb1ccecd019ec58 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 10 Nov 2006 20:38:53 +1100 Subject: [POWERPC] Distinguish POWER6 partition modes and tell userspace This adds code to look at the properties firmware puts in the device tree to determine what compatibility mode the partition is in on POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM entries appropriately. Specifically, we look at the cpu-version property in the cpu node(s). If that contains a "logical" PVR value (of the form 0x0f00000x), we call identify_cpu again with this PVR value. A value of 0x0f000001 indicates the partition is in POWER5+ compatibility mode, and a value of 0x0f000002 indicates "POWER6 architected" mode, with various extensions disabled. We also look for various other properties: ibm,dfp, ibm,purr and ibm,spurr. Signed-off-by: Paul Mackerras --- include/asm-powerpc/cputable.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 762d15e4887..d06222a5be5 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -24,6 +24,8 @@ #define PPC_FEATURE_ICACHE_SNOOP 0x00002000 #define PPC_FEATURE_ARCH_2_05 0x00001000 #define PPC_FEATURE_PA6T 0x00000800 +#define PPC_FEATURE_HAS_DFP 0x00000400 +#define PPC_FEATURE_POWER6_EXT 0x00000200 #define PPC_FEATURE_TRUE_LE 0x00000002 #define PPC_FEATURE_PPC_LE 0x00000001 @@ -92,7 +94,7 @@ extern struct cpu_spec *cur_cpu_spec; extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; -extern struct cpu_spec *identify_cpu(unsigned long offset); +extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); extern void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end); @@ -149,6 +151,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) #define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) #define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) +#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) #ifndef __ASSEMBLY__ @@ -333,7 +336,13 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_REAL_LE) + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE) +#define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \ + CPU_FTR_SPURR | CPU_FTR_REAL_LE) #define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ -- cgit v1.2.3 From bf1ab978be2318c5a564de9aa0f1a217b44170d4 Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Thu, 23 Nov 2006 00:46:37 +0100 Subject: [POWERPC] coredump: Add SPU elf notes to coredump. This patch adds SPU elf notes to the coredump. It creates a separate note for each of /regs, /fpcr, /lslr, /decr, /decr_status, /mem, /signal1, /signal1_type, /signal2, /signal2_type, /event_mask, /event_status, /mbox_info, /ibox_info, /wbox_info, /dma_info, /proxydma_info, /object-id. A new macro, ARCH_HAVE_EXTRA_NOTES, was created for architectures to specify they have extra elf core notes. A new macro, ELF_CORE_EXTRA_NOTES_SIZE, was created so the size of the additional notes could be calculated and added to the notes phdr entry. A new macro, ELF_CORE_WRITE_EXTRA_NOTES, was created so the new notes would be written after the existing notes. The SPU coredump code resides in spufs. Stub functions are provided in the kernel which are hooked into the spufs code which does the actual work via register_arch_coredump_calls(). A new set of __spufs__read/get() functions was provided to allow the coredump code to read from the spufs files without having to lock the SPU context for each file read from. Cc: Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann --- include/asm-powerpc/elf.h | 13 +++++++++++++ include/asm-powerpc/spu.h | 10 ++++++++++ include/linux/elf.h | 7 +++++++ 3 files changed, 30 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index 9a83a987d39..4545aa68250 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -411,4 +411,17 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 +#ifdef CONFIG_PPC_CELL +/* Notes used in ET_CORE. Note name is "SPU//". */ +#define NT_SPU 1 + +extern int arch_notes_size(void); +extern void arch_write_notes(struct file *file); + +#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size() +#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file) + +#define ARCH_HAVE_EXTRA_ELF_NOTES +#endif /* CONFIG_PPC_CELL */ + #endif /* _ASM_POWERPC_ELF_H */ diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index ffa4df08360..f968f869753 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -172,6 +172,13 @@ extern struct spufs_calls { struct module *owner; } spufs_calls; +/* coredump calls implemented in spufs */ +struct spu_coredump_calls { + asmlinkage int (*arch_notes_size)(void); + asmlinkage void (*arch_write_notes)(struct file *file); + struct module *owner; +}; + /* return status from spu_run, same as in libspe */ #define SPE_EVENT_DMA_ALIGNMENT 0x0008 /*A DMA alignment error */ #define SPE_EVENT_SPE_ERROR 0x0010 /*An illegal instruction error*/ @@ -203,6 +210,9 @@ static inline void unregister_spu_syscalls(struct spufs_calls *calls) } #endif /* MODULE */ +int register_arch_coredump_calls(struct spu_coredump_calls *calls); +void unregister_arch_coredump_calls(struct spu_coredump_calls *calls); + int spu_add_sysdev_attr(struct sysdev_attribute *attr); void spu_remove_sysdev_attr(struct sysdev_attribute *attr); diff --git a/include/linux/elf.h b/include/linux/elf.h index b70d1d2c8d2..743d5c8e6d3 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -368,5 +368,12 @@ extern Elf64_Dyn _DYNAMIC []; #endif +#ifndef ARCH_HAVE_EXTRA_ELF_NOTES +static inline int arch_notes_size(void) { return 0; } +static inline void arch_write_notes(struct file *file) { } + +#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size() +#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file) +#endif /* ARCH_HAVE_EXTRA_ELF_NOTES */ #endif /* _LINUX_ELF_H */ -- cgit v1.2.3 From 0b8e2e131094d162a836e2afe86e52acbfa05703 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:46 +0100 Subject: [POWERPC] Make 64-bit cpu features defined on 32-bit It saves #ifdef'ing in callers if we at least define the 64-bit cpu features for 32-bit also. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- include/asm-powerpc/cputable.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index d06222a5be5..354f66da9dc 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -315,7 +315,8 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_E500_2 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) -#ifdef __powerpc64__ + +/* 64-bit CPUs */ #define CPU_FTRS_POWER3 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE) #define CPU_FTRS_RS64 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ @@ -353,7 +354,6 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_PURR | CPU_FTR_REAL_LE) #define CPU_FTRS_COMPATIBLE (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2) -#endif #ifdef __powerpc64__ #define CPU_FTRS_POSSIBLE \ -- cgit v1.2.3 From e34226d2cd443a67f46fc531e3a6bc6e03843ce2 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:48 +0100 Subject: [POWERPC] add virq_to_hw accessor routine This adds an accessor routine virq_to_hw() to the virq routines which hides the implementation details of the virq to hwirq map. Acked-by: Benjamin Herrenschmidt Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/irq.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index f960f5346f4..46476e9a494 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -135,6 +135,10 @@ struct irq_map_entry { extern struct irq_map_entry irq_map[NR_IRQS]; +static inline irq_hw_number_t virq_to_hw(unsigned int virq) +{ + return irq_map[virq].hwirq; +} /** * irq_alloc_host - Allocate a new irq_host data structure -- cgit v1.2.3 From e28b003136b5b2f10c25b49c32df9b7742550c23 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:49 +0100 Subject: [POWERPC] cell: abstract spu management routines This adds a platform specific spu management abstraction and the coresponding routines to support the IBM Cell Blade. It also removes the hypervisor only resources that were included in struct spu. Three new platform specific routines are introduced, spu_enumerate_spus(), spu_create_spu() and spu_destroy_spu(). The underlying design uses a new type, struct spu_management_ops, to hold function pointers that the platform setup code is expected to initialize to instances appropriate to that platform. For the IBM Cell Blade support, I put the hypervisor only resources that were in struct spu into a platform specific data structure struct spu_pdata. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/spu.h | 5 +---- include/asm-powerpc/spu_priv1.h | 40 +++++++++++++++++++++++++++++++++++----- 2 files changed, 36 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index f968f869753..fdad4267b44 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -111,13 +111,11 @@ struct spu { u8 *local_store; unsigned long problem_phys; struct spu_problem __iomem *problem; - struct spu_priv1 __iomem *priv1; struct spu_priv2 __iomem *priv2; struct list_head list; struct list_head sched_list; struct list_head full_list; int number; - int nid; unsigned int irqs[3]; u32 node; u64 flags; @@ -144,8 +142,7 @@ struct spu { char irq_c1[8]; char irq_c2[8]; - struct device_node *devnode; - + void* pdata; /* platform private data */ struct sys_device sysdev; }; diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h index 4f9a04db99f..69dcb0c5388 100644 --- a/include/asm-powerpc/spu_priv1.h +++ b/include/asm-powerpc/spu_priv1.h @@ -21,12 +21,13 @@ #define _SPU_PRIV1_H #if defined(__KERNEL__) +#include + struct spu; /* access to priv1 registers */ -struct spu_priv1_ops -{ +struct spu_priv1_ops { void (*int_mask_and) (struct spu *spu, int class, u64 mask); void (*int_mask_or) (struct spu *spu, int class, u64 mask); void (*int_mask_set) (struct spu *spu, int class, u64 mask); @@ -171,12 +172,41 @@ spu_resource_allocation_enable_get (struct spu *spu) return spu_priv1_ops->resource_allocation_enable_get(spu); } -/* The declarations folowing are put here for convenience - * and only intended to be used by the platform setup code - * for initializing spu_priv1_ops. +/* spu management abstraction */ + +struct spu_management_ops { + int (*enumerate_spus)(int (*fn)(void *data)); + int (*create_spu)(struct spu *spu, void *data); + int (*destroy_spu)(struct spu *spu); +}; + +extern const struct spu_management_ops* spu_management_ops; + +static inline int +spu_enumerate_spus (int (*fn)(void *data)) +{ + return spu_management_ops->enumerate_spus(fn); +} + +static inline int +spu_create_spu (struct spu *spu, void *data) +{ + return spu_management_ops->create_spu(spu, data); +} + +static inline int +spu_destroy_spu (struct spu *spu) +{ + return spu_management_ops->destroy_spu(spu); +} + +/* + * The declarations folowing are put here for convenience + * and only intended to be used by the platform setup code. */ extern const struct spu_priv1_ops spu_priv1_mmio_ops; +extern const struct spu_management_ops spu_management_of_ops; #endif /* __KERNEL__ */ #endif -- cgit v1.2.3 From f58a9d171a346afb1b09190427e6c28c6118703e Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:51 +0100 Subject: [POWERPC] ps3: add support for ps3 platform Adds the core platform support for the PS3 game console and other devices using the PS3 hypervisor. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/ps3.h | 250 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 include/asm-powerpc/ps3.h (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h new file mode 100644 index 00000000000..d0109ffac50 --- /dev/null +++ b/include/asm-powerpc/ps3.h @@ -0,0 +1,250 @@ +/* + * PS3 platform declarations. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_PS3_H) +#define _ASM_POWERPC_PS3_H + +#include /* for __deprecated */ +#include +#include +#include + +/** + * struct ps3_device_id - HV bus device identifier from the system repository + * @bus_id: HV bus id, {1..} (zero invalid) + * @dev_id: HV device id, {0..} + */ + +struct ps3_device_id { + unsigned int bus_id; + unsigned int dev_id; +}; + + +/* dma routines */ + +enum ps3_dma_page_size { + PS3_DMA_4K = 12U, + PS3_DMA_64K = 16U, + PS3_DMA_1M = 20U, + PS3_DMA_16M = 24U, +}; + +enum ps3_dma_region_type { + PS3_DMA_OTHER = 0, + PS3_DMA_INTERNAL = 2, +}; + +/** + * struct ps3_dma_region - A per device dma state variables structure + * @did: The HV device id. + * @page_size: The ioc pagesize. + * @region_type: The HV region type. + * @bus_addr: The 'translated' bus address of the region. + * @len: The length in bytes of the region. + * @chunk_list: Opaque variable used by the ioc page manager. + */ + +struct ps3_dma_region { + struct ps3_device_id did; + enum ps3_dma_page_size page_size; + enum ps3_dma_region_type region_type; + unsigned long bus_addr; + unsigned long len; + struct { + spinlock_t lock; + struct list_head head; + } chunk_list; +}; + +/** + * struct ps3_dma_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +static inline void ps3_dma_region_init(struct ps3_dma_region *r, + const struct ps3_device_id* did, enum ps3_dma_page_size page_size, + enum ps3_dma_region_type region_type) +{ + r->did = *did; + r->page_size = page_size; + r->region_type = region_type; +} +int ps3_dma_region_create(struct ps3_dma_region *r); +int ps3_dma_region_free(struct ps3_dma_region *r); +int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, + unsigned long len, unsigned long *bus_addr); +int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr, + unsigned long len); + +/* mmio routines */ + +enum ps3_mmio_page_size { + PS3_MMIO_4K = 12U, + PS3_MMIO_64K = 16U +}; + +/** + * struct ps3_mmio_region - a per device mmio state variables structure + * + * Current systems can be supported with a single region per device. + */ + +struct ps3_mmio_region { + struct ps3_device_id did; + unsigned long bus_addr; + unsigned long len; + enum ps3_mmio_page_size page_size; + unsigned long lpar_addr; +}; + +/** + * struct ps3_mmio_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +static inline void ps3_mmio_region_init(struct ps3_mmio_region *r, + const struct ps3_device_id* did, unsigned long bus_addr, + unsigned long len, enum ps3_mmio_page_size page_size) +{ + r->did = *did; + r->bus_addr = bus_addr; + r->len = len; + r->page_size = page_size; +} +int ps3_mmio_region_create(struct ps3_mmio_region *r); +int ps3_free_mmio_region(struct ps3_mmio_region *r); +unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); + +/* inrerrupt routines */ + +int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq); +int ps3_free_io_irq(unsigned int virq); +int ps3_alloc_event_irq(unsigned int *virq); +int ps3_free_event_irq(unsigned int virq); +int ps3_send_event_locally(unsigned int virq); +int ps3_connect_event_irq(const struct ps3_device_id *did, + unsigned int interrupt_id, unsigned int *virq); +int ps3_disconnect_event_irq(const struct ps3_device_id *did, + unsigned int interrupt_id, unsigned int virq); +int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq); +int ps3_free_vuart_irq(unsigned int virq); +int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class, + unsigned int *virq); +int ps3_free_spe_irq(unsigned int virq); + +/* lv1 result codes */ + +enum lv1_result { + LV1_SUCCESS = 0, + /* not used -1 */ + LV1_RESOURCE_SHORTAGE = -2, + LV1_NO_PRIVILEGE = -3, + LV1_DENIED_BY_POLICY = -4, + LV1_ACCESS_VIOLATION = -5, + LV1_NO_ENTRY = -6, + LV1_DUPLICATE_ENTRY = -7, + LV1_TYPE_MISMATCH = -8, + LV1_BUSY = -9, + LV1_EMPTY = -10, + LV1_WRONG_STATE = -11, + /* not used -12 */ + LV1_NO_MATCH = -13, + LV1_ALREADY_CONNECTED = -14, + LV1_UNSUPPORTED_PARAMETER_VALUE = -15, + LV1_CONDITION_NOT_SATISFIED = -16, + LV1_ILLEGAL_PARAMETER_VALUE = -17, + LV1_BAD_OPTION = -18, + LV1_IMPLEMENTATION_LIMITATION = -19, + LV1_NOT_IMPLEMENTED = -20, + LV1_INVALID_CLASS_ID = -21, + LV1_CONSTRAINT_NOT_SATISFIED = -22, + LV1_ALIGNMENT_ERROR = -23, + LV1_INTERNAL_ERROR = -32768, +}; + +static inline const char* ps3_result(int result) +{ +#if defined(DEBUG) + switch (result) { + case LV1_SUCCESS: + return "LV1_SUCCESS (0)"; + case -1: + return "** unknown result ** (-1)"; + case LV1_RESOURCE_SHORTAGE: + return "LV1_RESOURCE_SHORTAGE (-2)"; + case LV1_NO_PRIVILEGE: + return "LV1_NO_PRIVILEGE (-3)"; + case LV1_DENIED_BY_POLICY: + return "LV1_DENIED_BY_POLICY (-4)"; + case LV1_ACCESS_VIOLATION: + return "LV1_ACCESS_VIOLATION (-5)"; + case LV1_NO_ENTRY: + return "LV1_NO_ENTRY (-6)"; + case LV1_DUPLICATE_ENTRY: + return "LV1_DUPLICATE_ENTRY (-7)"; + case LV1_TYPE_MISMATCH: + return "LV1_TYPE_MISMATCH (-8)"; + case LV1_BUSY: + return "LV1_BUSY (-9)"; + case LV1_EMPTY: + return "LV1_EMPTY (-10)"; + case LV1_WRONG_STATE: + return "LV1_WRONG_STATE (-11)"; + case -12: + return "** unknown result ** (-12)"; + case LV1_NO_MATCH: + return "LV1_NO_MATCH (-13)"; + case LV1_ALREADY_CONNECTED: + return "LV1_ALREADY_CONNECTED (-14)"; + case LV1_UNSUPPORTED_PARAMETER_VALUE: + return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)"; + case LV1_CONDITION_NOT_SATISFIED: + return "LV1_CONDITION_NOT_SATISFIED (-16)"; + case LV1_ILLEGAL_PARAMETER_VALUE: + return "LV1_ILLEGAL_PARAMETER_VALUE (-17)"; + case LV1_BAD_OPTION: + return "LV1_BAD_OPTION (-18)"; + case LV1_IMPLEMENTATION_LIMITATION: + return "LV1_IMPLEMENTATION_LIMITATION (-19)"; + case LV1_NOT_IMPLEMENTED: + return "LV1_NOT_IMPLEMENTED (-20)"; + case LV1_INVALID_CLASS_ID: + return "LV1_INVALID_CLASS_ID (-21)"; + case LV1_CONSTRAINT_NOT_SATISFIED: + return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; + case LV1_ALIGNMENT_ERROR: + return "LV1_ALIGNMENT_ERROR (-23)"; + case LV1_INTERNAL_ERROR: + return "LV1_INTERNAL_ERROR (-32768)"; + default: + BUG(); + return "** unknown result **"; + }; +#else + return ""; +#endif +} + +#endif -- cgit v1.2.3 From 1e4ed915d133aaa2802d11914a7e80b3e31304e6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:52 +0100 Subject: [POWERPC] ps3: add lv1 hvcalls Adds the PS3 hvcalls. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/lv1call.h | 345 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 345 insertions(+) create mode 100644 include/asm-powerpc/lv1call.h (limited to 'include') diff --git a/include/asm-powerpc/lv1call.h b/include/asm-powerpc/lv1call.h new file mode 100644 index 00000000000..f733beeea63 --- /dev/null +++ b/include/asm-powerpc/lv1call.h @@ -0,0 +1,345 @@ +/* + * PS3 hvcall interface. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * Copyright 2003, 2004 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_LV1CALL_H) +#define _ASM_POWERPC_LV1CALL_H + +#if !defined(__ASSEMBLY__) + +#include + +/* lv1 call declaration macros */ + +#define LV1_1_IN_ARG_DECL u64 in_1 +#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2 +#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3 +#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4 +#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5 +#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6 +#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7 +#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8 +#define LV1_1_OUT_ARG_DECL u64 *out_1 +#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2 +#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3 +#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4 +#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5 +#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6 +#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7 + +#define LV1_0_IN_0_OUT_ARG_DECL void +#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL +#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL +#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL +#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL +#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL +#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL +#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL + +#define LV1_0_IN_1_OUT_ARG_DECL LV1_1_OUT_ARG_DECL +#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL + +#define LV1_0_IN_2_OUT_ARG_DECL LV1_2_OUT_ARG_DECL +#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL + +#define LV1_0_IN_3_OUT_ARG_DECL LV1_3_OUT_ARG_DECL +#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL + +#define LV1_0_IN_4_OUT_ARG_DECL LV1_4_OUT_ARG_DECL +#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL + +#define LV1_0_IN_5_OUT_ARG_DECL LV1_5_OUT_ARG_DECL +#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL + +#define LV1_0_IN_6_OUT_ARG_DECL LV1_6_OUT_ARG_DECL +#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL + +#define LV1_0_IN_7_OUT_ARG_DECL LV1_7_OUT_ARG_DECL +#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL + +#define LV1_1_IN_ARGS in_1 +#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2 +#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3 +#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4 +#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5 +#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6 +#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7 +#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8 + +#define LV1_1_OUT_ARGS out_1 +#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2 +#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3 +#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4 +#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5 +#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6 +#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7 + +#define LV1_0_IN_0_OUT_ARGS +#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS +#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS +#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS +#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS +#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS +#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS +#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS + +#define LV1_0_IN_1_OUT_ARGS LV1_1_OUT_ARGS +#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS + +#define LV1_0_IN_2_OUT_ARGS LV1_2_OUT_ARGS +#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS + +#define LV1_0_IN_3_OUT_ARGS LV1_3_OUT_ARGS +#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS + +#define LV1_0_IN_4_OUT_ARGS LV1_4_OUT_ARGS +#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS + +#define LV1_0_IN_5_OUT_ARGS LV1_5_OUT_ARGS +#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS + +#define LV1_0_IN_6_OUT_ARGS LV1_6_OUT_ARGS +#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS + +#define LV1_0_IN_7_OUT_ARGS LV1_7_OUT_ARGS +#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS + +/* + * This LV1_CALL() macro is for use by callers. It expands into an + * inline call wrapper and an underscored HV call declaration. The + * wrapper can be used to instrument the lv1 call interface. The + * file lv1call.S defines its own LV1_CALL() macro to expand into + * the actual underscored call definition. + */ + +#if !defined(LV1_CALL) +#define LV1_CALL(name, in, out, num) \ + extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ + static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \ + {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);} +#endif + +#endif /* !defined(__ASSEMBLY__) */ + +/* lv1 call table */ + +LV1_CALL(allocate_memory, 4, 2, 0 ) +LV1_CALL(write_htab_entry, 4, 0, 1 ) +LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) +LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) +LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 ) +LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) +LV1_CALL(select_virtual_address_space, 1, 0, 7 ) +LV1_CALL(pause, 1, 0, 9 ) +LV1_CALL(destruct_virtual_address_space, 1, 0, 10 ) +LV1_CALL(configure_irq_state_bitmap, 3, 0, 11 ) +LV1_CALL(connect_irq_plug_ext, 5, 0, 12 ) +LV1_CALL(release_memory, 1, 0, 13 ) +LV1_CALL(disconnect_irq_plug_ext, 3, 0, 17 ) +LV1_CALL(construct_event_receive_port, 0, 1, 18 ) +LV1_CALL(destruct_event_receive_port, 1, 0, 19 ) +LV1_CALL(send_event_locally, 1, 0, 24 ) +LV1_CALL(end_of_interrupt, 1, 0, 27 ) +LV1_CALL(connect_irq_plug, 2, 0, 28 ) +LV1_CALL(disconnect_irq_plug, 1, 0, 29 ) +LV1_CALL(end_of_interrupt_ext, 3, 0, 30 ) +LV1_CALL(did_update_interrupt_mask, 2, 0, 31 ) +LV1_CALL(shutdown_logical_partition, 1, 0, 44 ) +LV1_CALL(destruct_logical_spe, 1, 0, 54 ) +LV1_CALL(construct_logical_spe, 7, 6, 57 ) +LV1_CALL(set_spe_interrupt_mask, 3, 0, 61 ) +LV1_CALL(set_spe_transition_notifier, 3, 0, 64 ) +LV1_CALL(disable_logical_spe, 2, 0, 65 ) +LV1_CALL(clear_spe_interrupt_status, 4, 0, 66 ) +LV1_CALL(get_spe_interrupt_status, 2, 1, 67 ) +LV1_CALL(get_logical_ppe_id, 0, 1, 69 ) +LV1_CALL(set_interrupt_mask, 5, 0, 73 ) +LV1_CALL(get_logical_partition_id, 0, 1, 74 ) +LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) +LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) +LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) +LV1_CALL(create_repository_node, 6, 0, 90 ) +LV1_CALL(get_repository_node_value, 5, 2, 91 ) +LV1_CALL(modify_repository_node_value, 6, 0, 92 ) +LV1_CALL(remove_repository_node, 4, 0, 93 ) +LV1_CALL(read_htab_entries, 2, 5, 95 ) +LV1_CALL(set_dabr, 2, 0, 96 ) +LV1_CALL(get_total_execution_time, 2, 1, 103 ) +LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) +LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) +LV1_CALL(map_htab, 1, 1, 122 ) +LV1_CALL(unmap_htab, 1, 0, 123 ) +LV1_CALL(get_version_info, 0, 1, 127 ) +LV1_CALL(insert_htab_entry, 6, 3, 158 ) +LV1_CALL(read_virtual_uart, 3, 1, 162 ) +LV1_CALL(write_virtual_uart, 3, 1, 163 ) +LV1_CALL(set_virtual_uart_param, 3, 0, 164 ) +LV1_CALL(get_virtual_uart_param, 2, 1, 165 ) +LV1_CALL(configure_virtual_uart_irq, 1, 1, 166 ) +LV1_CALL(open_device, 3, 0, 170 ) +LV1_CALL(close_device, 2, 0, 171 ) +LV1_CALL(map_device_mmio_region, 5, 1, 172 ) +LV1_CALL(unmap_device_mmio_region, 3, 0, 173 ) +LV1_CALL(allocate_device_dma_region, 5, 1, 174 ) +LV1_CALL(free_device_dma_region, 3, 0, 175 ) +LV1_CALL(map_device_dma_region, 6, 0, 176 ) +LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) +LV1_CALL(net_add_multicast_address, 4, 0, 185 ) +LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) +LV1_CALL(net_start_tx_dma, 4, 0, 187 ) +LV1_CALL(net_stop_tx_dma, 3, 0, 188 ) +LV1_CALL(net_start_rx_dma, 4, 0, 189 ) +LV1_CALL(net_stop_rx_dma, 3, 0, 190 ) +LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) +LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) +LV1_CALL(net_control, 6, 2, 194 ) +LV1_CALL(connect_interrupt_event_receive_port, 4, 0, 197 ) +LV1_CALL(disconnect_interrupt_event_receive_port, 4, 0, 198 ) +LV1_CALL(get_spe_all_interrupt_statuses, 1, 1, 199 ) +LV1_CALL(deconfigure_virtual_uart_irq, 0, 0, 202 ) +LV1_CALL(enable_logical_spe, 2, 0, 207 ) +LV1_CALL(gpu_open, 1, 0, 210 ) +LV1_CALL(gpu_close, 0, 0, 211 ) +LV1_CALL(gpu_device_map, 1, 2, 212 ) +LV1_CALL(gpu_device_unmap, 1, 0, 213 ) +LV1_CALL(gpu_memory_allocate, 5, 2, 214 ) +LV1_CALL(gpu_memory_free, 1, 0, 216 ) +LV1_CALL(gpu_context_allocate, 2, 5, 217 ) +LV1_CALL(gpu_context_free, 1, 0, 218 ) +LV1_CALL(gpu_context_iomap, 5, 0, 221 ) +LV1_CALL(gpu_context_attribute, 6, 0, 225 ) +LV1_CALL(gpu_context_intr, 1, 1, 227 ) +LV1_CALL(gpu_attribute, 5, 0, 228 ) +LV1_CALL(get_rtc, 0, 2, 232 ) +LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) +LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) +LV1_CALL(stop_ppe_periodic_tracer, 1, 1, 242 ) +LV1_CALL(storage_read, 6, 1, 245 ) +LV1_CALL(storage_write, 6, 1, 246 ) +LV1_CALL(storage_send_device_command, 6, 1, 248 ) +LV1_CALL(storage_get_async_status, 1, 2, 249 ) +LV1_CALL(storage_check_async_status, 2, 1, 254 ) +LV1_CALL(panic, 1, 0, 255 ) +LV1_CALL(construct_lpm, 6, 3, 140 ) +LV1_CALL(destruct_lpm, 1, 0, 141 ) +LV1_CALL(start_lpm, 1, 0, 142 ) +LV1_CALL(stop_lpm, 1, 1, 143 ) +LV1_CALL(copy_lpm_trace_buffer, 3, 1, 144 ) +LV1_CALL(add_lpm_event_bookmark, 5, 0, 145 ) +LV1_CALL(delete_lpm_event_bookmark, 3, 0, 146 ) +LV1_CALL(set_lpm_interrupt_mask, 3, 1, 147 ) +LV1_CALL(get_lpm_interrupt_status, 1, 1, 148 ) +LV1_CALL(set_lpm_general_control, 5, 2, 149 ) +LV1_CALL(set_lpm_interval, 3, 1, 150 ) +LV1_CALL(set_lpm_trigger_control, 3, 1, 151 ) +LV1_CALL(set_lpm_counter_control, 4, 1, 152 ) +LV1_CALL(set_lpm_group_control, 3, 1, 153 ) +LV1_CALL(set_lpm_debug_bus_control, 3, 1, 154 ) +LV1_CALL(set_lpm_counter, 5, 2, 155 ) +LV1_CALL(set_lpm_signal, 7, 0, 156 ) +LV1_CALL(set_lpm_spr_trigger, 2, 0, 157 ) + +#endif -- cgit v1.2.3 From 82a527f0bd84977d7e85f15fb1f987c42cc0a68d Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:53 +0100 Subject: [POWERPC] ps3: add feature bits Adds the needed firmware feature bits for the PS3. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/firmware.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index fdf9aff7115..d1011b892d5 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -58,12 +58,17 @@ enum { FW_FEATURE_PSERIES_ALWAYS = 0, FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, + FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR, + FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR, FW_FEATURE_POSSIBLE = #ifdef CONFIG_PPC_PSERIES FW_FEATURE_PSERIES_POSSIBLE | #endif #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_POSSIBLE | +#endif +#ifdef CONFIG_PS3 + FW_FEATURE_PS3_POSSIBLE | #endif 0, FW_FEATURE_ALWAYS = @@ -72,6 +77,9 @@ enum { #endif #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_ALWAYS & +#endif +#ifdef CONFIG_PS3 + FW_FEATURE_PS3_ALWAYS & #endif FW_FEATURE_POSSIBLE, -- cgit v1.2.3 From 6e74b38a7ffa6b69f287ae629aae91e725916e6f Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:55 +0100 Subject: [POWERPC] ps3: add repository support Adds support for the PS3 repository. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/ps3.h | 139 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index d0109ffac50..eb4bbb6cff5 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -247,4 +247,143 @@ static inline const char* ps3_result(int result) #endif } +/* repository bus info */ + +enum ps3_bus_type { + PS3_BUS_TYPE_SB = 4, + PS3_BUS_TYPE_STORAGE = 5, +}; + +enum ps3_dev_type { + PS3_DEV_TYPE_SB_GELIC = 3, + PS3_DEV_TYPE_SB_USB = 4, + PS3_DEV_TYPE_SB_GPIO = 6, +}; + +int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str, + u64 *value); +int ps3_repository_read_bus_id(unsigned int bus_index, unsigned int *bus_id); +int ps3_repository_read_bus_type(unsigned int bus_index, + enum ps3_bus_type *bus_type); +int ps3_repository_read_bus_num_dev(unsigned int bus_index, + unsigned int *num_dev); + +/* repository bus device info */ + +enum ps3_interrupt_type { + PS3_INTERRUPT_TYPE_EVENT_PORT = 2, + PS3_INTERRUPT_TYPE_SB_OHCI = 3, + PS3_INTERRUPT_TYPE_SB_EHCI = 4, + PS3_INTERRUPT_TYPE_OTHER = 5, +}; + +enum ps3_region_type { + PS3_REGION_TYPE_SB_OHCI = 3, + PS3_REGION_TYPE_SB_EHCI = 4, + PS3_REGION_TYPE_SB_GPIO = 5, +}; + +int ps3_repository_read_dev_str(unsigned int bus_index, + unsigned int dev_index, const char *dev_str, u64 *value); +int ps3_repository_read_dev_id(unsigned int bus_index, unsigned int dev_index, + unsigned int *dev_id); +int ps3_repository_read_dev_type(unsigned int bus_index, + unsigned int dev_index, enum ps3_dev_type *dev_type); +int ps3_repository_read_dev_intr(unsigned int bus_index, + unsigned int dev_index, unsigned int intr_index, + enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id); +int ps3_repository_read_dev_reg_type(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, + enum ps3_region_type *reg_type); +int ps3_repository_read_dev_reg_addr(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, u64 *bus_addr, + u64 *len); +int ps3_repository_read_dev_reg(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, + enum ps3_region_type *reg_type, u64 *bus_addr, u64 *len); + +/* repository bus enumerators */ + +struct ps3_repository_device { + unsigned int bus_index; + unsigned int dev_index; + struct ps3_device_id did; +}; + +int ps3_repository_find_device(enum ps3_bus_type bus_type, + enum ps3_dev_type dev_type, + const struct ps3_repository_device *start_dev, + struct ps3_repository_device *dev); +static inline int ps3_repository_find_first_device( + enum ps3_bus_type bus_type, enum ps3_dev_type dev_type, + struct ps3_repository_device *dev) +{ + return ps3_repository_find_device(bus_type, dev_type, NULL, dev); +} +int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, + enum ps3_interrupt_type intr_type, unsigned int *interrupt_id); +int ps3_repository_find_region(const struct ps3_repository_device *dev, + enum ps3_region_type reg_type, u64 *bus_addr, u64 *len); + +/* repository block device info */ + +int ps3_repository_read_dev_port(unsigned int bus_index, + unsigned int dev_index, u64 *port); +int ps3_repository_read_dev_blk_size(unsigned int bus_index, + unsigned int dev_index, u64 *blk_size); +int ps3_repository_read_dev_num_blocks(unsigned int bus_index, + unsigned int dev_index, u64 *num_blocks); +int ps3_repository_read_dev_num_regions(unsigned int bus_index, + unsigned int dev_index, unsigned int *num_regions); +int ps3_repository_read_dev_region_id(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, + unsigned int *region_id); +int ps3_repository_read_dev_region_size(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_size); +int ps3_repository_read_dev_region_start(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_start); + +/* repository pu and memory info */ + +int ps3_repository_read_num_pu(unsigned int *num_pu); +int ps3_repository_read_ppe_id(unsigned int *pu_index, unsigned int *ppe_id); +int ps3_repository_read_rm_base(unsigned int ppe_id, u64 *rm_base); +int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size); +int ps3_repository_read_region_total(u64 *region_total); +int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, + u64 *region_total); + +/* repository pme info */ + +int ps3_repository_read_num_be(unsigned int *num_be); +int ps3_repository_read_be_node_id(unsigned int be_index, u64 *node_id); +int ps3_repository_read_tb_freq(u64 node_id, u64 *tb_freq); +int ps3_repository_read_be_tb_freq(unsigned int be_index, u64 *tb_freq); + +/* repository 'Other OS' area */ + +int ps3_repository_read_boot_dat_addr(u64 *lpar_addr); +int ps3_repository_read_boot_dat_size(unsigned int *size); +int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size); + +/* repository spu info */ + +/** + * enum spu_resource_type - Type of spu resource. + * @spu_resource_type_shared: Logical spu is shared with other partions. + * @spu_resource_type_exclusive: Logical spu is not shared with other partions. + * + * Returned by ps3_repository_read_spu_resource_id(). + */ + +enum ps3_spu_resource_type { + PS3_SPU_RESOURCE_TYPE_SHARED = 0, + PS3_SPU_RESOURCE_TYPE_EXCLUSIVE = 0x8000000000000000UL, +}; + +int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved); +int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id); +int ps3_repository_read_spu_resource_id(unsigned int res_index, + enum ps3_spu_resource_type* resource_type, unsigned int *resource_id); + #endif -- cgit v1.2.3 From 261efc3f178c8c5b55d76208aee1f39ce247f723 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:57 +0100 Subject: [POWERPC] ps3: add lpar addressing Adds some needed bits for a config option PS3_USE_LPAR_ADDR that disables the PS3 lpar address translation mechanism. This is a currently needed workaround for limitations in the design of the generic cell spu support. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/sparsemem.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h index 38b1ea3b58f..48ad807a0b8 100644 --- a/include/asm-powerpc/sparsemem.h +++ b/include/asm-powerpc/sparsemem.h @@ -9,8 +9,14 @@ * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space */ #define SECTION_SIZE_BITS 24 + +#if defined(CONFIG_PS3_USE_LPAR_ADDR) +#define MAX_PHYSADDR_BITS 47 +#define MAX_PHYSMEM_BITS 47 +#else #define MAX_PHYSADDR_BITS 44 #define MAX_PHYSMEM_BITS 44 +#endif #ifdef CONFIG_MEMORY_HOTPLUG extern void create_section_mapping(unsigned long start, unsigned long end); -- cgit v1.2.3 From a3d4d6435b56eb0b6ff4f88e5a513cfccfb3e770 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:47:00 +0100 Subject: [POWERPC] ps3: add ps3 platform system bus support Adds a PS3 system bus driver. This system bus is a virtual bus used to present the PS3 system devices in the LDM. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- include/asm-powerpc/ps3.h | 73 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index eb4bbb6cff5..52a69ed0d90 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -386,4 +386,77 @@ int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id); int ps3_repository_read_spu_resource_id(unsigned int res_index, enum ps3_spu_resource_type* resource_type, unsigned int *resource_id); + +/* system bus routines */ + +enum ps3_match_id { + PS3_MATCH_ID_EHCI = 1, + PS3_MATCH_ID_OHCI, + PS3_MATCH_ID_GELIC, + PS3_MATCH_ID_AV_SETTINGS, + PS3_MATCH_ID_SYSTEM_MANAGER, +}; + +/** + * struct ps3_system_bus_device - a device on the system bus + */ + +struct ps3_system_bus_device { + enum ps3_match_id match_id; + struct ps3_device_id did; + unsigned int interrupt_id; +/* struct iommu_table *iommu_table; -- waiting for Ben's cleanups */ + struct ps3_dma_region *d_region; + struct ps3_mmio_region *m_region; + struct device core; +}; + +/** + * struct ps3_system_bus_driver - a driver for a device on the system bus + */ + +struct ps3_system_bus_driver { + enum ps3_match_id match_id; + struct device_driver core; + int (*probe)(struct ps3_system_bus_device *); + int (*remove)(struct ps3_system_bus_device *); +/* int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */ +/* int (*resume)(struct ps3_system_bus_device *); */ +}; + +int ps3_system_bus_device_register(struct ps3_system_bus_device *dev); +int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv); +void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv); +static inline struct ps3_system_bus_driver *to_ps3_system_bus_driver( + struct device_driver *_drv) +{ + return container_of(_drv, struct ps3_system_bus_driver, core); +} +static inline struct ps3_system_bus_device *to_ps3_system_bus_device( + struct device *_dev) +{ + return container_of(_dev, struct ps3_system_bus_device, core); +} + +/** + * ps3_system_bus_set_drvdata - + * @dev: device structure + * @data: Data to set + */ + +static inline void ps3_system_bus_set_driver_data( + struct ps3_system_bus_device *dev, void *data) +{ + dev->core.driver_data = data; +} +static inline void *ps3_system_bus_get_driver_data( + struct ps3_system_bus_device *dev) +{ + return dev->core.driver_data; +} + +/* These two need global scope for get_dma_ops(). */ + +extern struct bus_type ps3_system_bus_type; + #endif -- cgit v1.2.3 From e055595d3e5f5233374211bc6893e5d16976df99 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:18:55 +0100 Subject: [POWERPC] cell: fix building without spufs It may be desireable to build a kernel for cell without spufs, e.g. as the initial kboot kernel. This requires that the SPU specific parts of the core dump and the xmon code depend on CONFIG_SPU_BASE instead of CONFIG_PPC_CELL. Signed-off-by: Arnd Bergmann --- include/asm-powerpc/elf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index 4545aa68250..b5436642a10 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -411,7 +411,7 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 -#ifdef CONFIG_PPC_CELL +#ifdef CONFIG_SPU_BASE /* Notes used in ET_CORE. Note name is "SPU//". */ #define NT_SPU 1 -- cgit v1.2.3 From eb30c72026500f9efa9bb23ab2393d6a9e36c5e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 27 Nov 2006 19:18:56 +0100 Subject: [POWERPC] ps3: Missed renames of CONFIG_PS3 to CONFIG_PPC_PS3 When renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been missed. I also fixed up the alignment in arch/powerpc/platforms/Makefile. Signed-off-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann --- include/asm-powerpc/firmware.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index d1011b892d5..84d43d6e13e 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -67,7 +67,7 @@ enum { #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_POSSIBLE | #endif -#ifdef CONFIG_PS3 +#ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_POSSIBLE | #endif 0, @@ -78,7 +78,7 @@ enum { #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_ALWAYS & #endif -#ifdef CONFIG_PS3 +#ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_ALWAYS & #endif FW_FEATURE_POSSIBLE, -- cgit v1.2.3 From e22ba7e38144c1cccac5024cfd6ec88bb64d3e1f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:18:57 +0100 Subject: [POWERPC] ps3: multiplatform build fixes A few code paths need to check whether or not they are running on the PS3's LV1 hypervisor before making hcalls. This introduces a new firmware feature bit for this, FW_FEATURE_PS3_LV1. Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES, FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time, which is a bug. The same problem can also happen for (PPC_ISERIES && !PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I introduce a new CONFIG_PPC_NATIVE option that is set when at least one platform is selected that can run without a hypervisor and then turns the firmware feature check into a run-time option. The new cell oprofile support that was recently merged does not work on hypervisor based platforms like the PS3, therefore make it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change if we get oprofile support for PS3. Signed-off-by: Arnd Bergmann --- include/asm-powerpc/firmware.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index 84d43d6e13e..98f7b62422c 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -42,6 +42,7 @@ #define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) #define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) #define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) +#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) #ifndef __ASSEMBLY__ @@ -58,8 +59,10 @@ enum { FW_FEATURE_PSERIES_ALWAYS = 0, FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, - FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR, - FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR, + FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_NATIVE_POSSIBLE = 0, + FW_FEATURE_NATIVE_ALWAYS = 0, FW_FEATURE_POSSIBLE = #ifdef CONFIG_PPC_PSERIES FW_FEATURE_PSERIES_POSSIBLE | @@ -69,6 +72,9 @@ enum { #endif #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_POSSIBLE | +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS | #endif 0, FW_FEATURE_ALWAYS = @@ -80,6 +86,9 @@ enum { #endif #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_ALWAYS & +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS & #endif FW_FEATURE_POSSIBLE, -- cgit v1.2.3 From 11faa658c668030759d4aea6a273b7ac9a0b4746 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:19:00 +0100 Subject: [POWERPC] fix building without PCI At least the ide driver calls pcibus_to_node, which is not defined when CONFIG_PCI is disabled. This adds a nop function for the !PCI case. Signed-off-by: Arnd Bergmann --- include/asm-powerpc/topology.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 9fe7894ee03..50c014007de 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -32,7 +32,14 @@ static inline int node_to_first_cpu(int node) int of_node_to_nid(struct device_node *device); struct pci_bus; +#ifdef CONFIG_PCI extern int pcibus_to_node(struct pci_bus *bus); +#else +static inline int pcibus_to_node(struct pci_bus *bus) +{ + return -1; +} +#endif #define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ CPU_MASK_ALL : \ -- cgit v1.2.3 From 4cfbdfff70989a0d99b6f357fbbe379c22a05f7c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 1 Dec 2006 12:53:18 +0100 Subject: [POWERPC] include/asm-powerpc/: "extern inline" -> "static inline" "extern inline" generates a warning with -Wmissing-prototypes and I'm currently working on getting the kernel cleaned up for adding this to the CFLAGS since it will help us to avoid a nasty class of runtime errors. If there are places that really need a forced inline, __always_inline would be the correct solution. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras --- include/asm-powerpc/io.h | 4 ++-- include/asm-powerpc/tsi108.h | 4 ++-- include/asm-powerpc/uaccess.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 75df3bce9cc..1cd532379c3 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -302,7 +302,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) #ifdef CONFIG_PPC32 #define __do_in_asm(name, op) \ -extern __inline__ unsigned int name(unsigned int port) \ +static inline unsigned int name(unsigned int port) \ { \ unsigned int x; \ __asm__ __volatile__( \ @@ -329,7 +329,7 @@ extern __inline__ unsigned int name(unsigned int port) \ } #define __do_out_asm(name, op) \ -extern __inline__ void name(unsigned int val, unsigned int port) \ +static inline void name(unsigned int val, unsigned int port) \ { \ __asm__ __volatile__( \ "sync\n" \ diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h index 2c702d35a7c..4e95d153be8 100644 --- a/include/asm-powerpc/tsi108.h +++ b/include/asm-powerpc/tsi108.h @@ -98,12 +98,12 @@ typedef struct { extern u32 get_vir_csrbase(void); extern u32 tsi108_csr_vir_base; -extern inline u32 tsi108_read_reg(u32 reg_offset) +static inline u32 tsi108_read_reg(u32 reg_offset) { return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); } -extern inline void tsi108_write_reg(u32 reg_offset, u32 val) +static inline void tsi108_write_reg(u32 reg_offset, u32 val) { out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); } diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h index d83fc29c2bb..adbf16b8cfb 100644 --- a/include/asm-powerpc/uaccess.h +++ b/include/asm-powerpc/uaccess.h @@ -304,7 +304,7 @@ extern unsigned long __copy_tofrom_user(void __user *to, #ifndef __powerpc64__ -extern inline unsigned long copy_from_user(void *to, +static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) { unsigned long over; @@ -319,7 +319,7 @@ extern inline unsigned long copy_from_user(void *to, return n; } -extern inline unsigned long copy_to_user(void __user *to, +static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n) { unsigned long over; -- cgit v1.2.3 From 143db67af02cecab28032ec3a52e586b1433fe70 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sun, 26 Nov 2006 17:36:15 +1100 Subject: [POWERPC] Provide dummy hard_irq_enable/disable() for PPC32 To allow arch/powerpc/kernel/crash.c to build on 32-bit we need a definition of hard_irq_disable(). 32-bit doesn't support the lazy interrupt disabling mechanism, so on 32-bit hard_irq_disable() is simply local_irq_disable(). Add a definition for hard_irq_enable() just for completeness. This allows (KEXEC=y && PPC32=y) to build again. Broken since d04c56f73c30a5e593202ecfcf25ed43d42363a2. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- include/asm-powerpc/hw_irq.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index fd3f2a20627..d604863d72f 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -102,6 +102,9 @@ static inline void local_irq_save_ptr(unsigned long *flags) #define local_irq_save(flags) local_irq_save_ptr(&flags) #define irqs_disabled() ((mfmsr() & MSR_EE) == 0) +#define hard_irq_enable() local_irq_enable() +#define hard_irq_disable() local_irq_disable() + #endif /* CONFIG_PPC64 */ #define mask_irq(irq) \ -- cgit v1.2.3 From e65fdfd6ca447353ad1b4c0a0d20df55f3f6f233 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 27 Nov 2006 14:16:26 -0700 Subject: [POWERPC] Separate IRQ config / register set from main header There is no need to expose these settings outside the scope of the interrupt controller code itself. Signed-off-by: Sylvain Munaut Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc52xx.h | 37 ------------------------------------- 1 file changed, 37 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h index e9aa622f19f..fff752c4bd1 100644 --- a/include/asm-powerpc/mpc52xx.h +++ b/include/asm-powerpc/mpc52xx.h @@ -19,49 +19,12 @@ #endif /* __ASSEMBLY__ */ -/* ======================================================================== */ -/* HW IRQ mapping */ -/* ======================================================================== */ - -#define MPC52xx_IRQ_L1_CRIT (0) -#define MPC52xx_IRQ_L1_MAIN (1) -#define MPC52xx_IRQ_L1_PERP (2) -#define MPC52xx_IRQ_L1_SDMA (3) - -#define MPC52xx_IRQ_L1_OFFSET (6) -#define MPC52xx_IRQ_L1_MASK (0xc0) - -#define MPC52xx_IRQ_L2_OFFSET (0) -#define MPC52xx_IRQ_L2_MASK (0x3f) - -#define MPC52xx_IRQ_HIGHTESTHWIRQ (0xd0) - - /* ======================================================================== */ /* Structures mapping of some unit register set */ /* ======================================================================== */ #ifndef __ASSEMBLY__ -/* Interrupt controller Register set */ -struct mpc52xx_intr { - u32 per_mask; /* INTR + 0x00 */ - u32 per_pri1; /* INTR + 0x04 */ - u32 per_pri2; /* INTR + 0x08 */ - u32 per_pri3; /* INTR + 0x0c */ - u32 ctrl; /* INTR + 0x10 */ - u32 main_mask; /* INTR + 0x14 */ - u32 main_pri1; /* INTR + 0x18 */ - u32 main_pri2; /* INTR + 0x1c */ - u32 reserved1; /* INTR + 0x20 */ - u32 enc_status; /* INTR + 0x24 */ - u32 crit_status; /* INTR + 0x28 */ - u32 main_status; /* INTR + 0x2c */ - u32 per_status; /* INTR + 0x30 */ - u32 reserved2; /* INTR + 0x34 */ - u32 per_error; /* INTR + 0x38 */ -}; - /* Memory Mapping Control */ struct mpc52xx_mmap_ctl { u32 mbar; /* MMAP_CTRL + 0x00 */ -- cgit v1.2.3 From 6065170cf75c64267f6edec5fd359ce8444bd13d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:27 -0700 Subject: [POWERPC] Add common routines for 52xx support in arch/powerpc Adds utility routines used by 52xx device drivers and board support code. Main functionality is to add device nodes to the of_platform_bus, retrieve the IPB bus frequency, and find+ioremap device registers. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc52xx.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h index fff752c4bd1..4a28a850998 100644 --- a/include/asm-powerpc/mpc52xx.h +++ b/include/asm-powerpc/mpc52xx.h @@ -241,6 +241,10 @@ struct mpc52xx_cdm { #ifndef __ASSEMBLY__ +extern void __iomem * mpc52xx_find_and_map(const char *); +extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); +extern void mpc52xx_setup_cpu(void); + extern void mpc52xx_init_irq(void); extern unsigned int mpc52xx_get_irq(void); -- cgit v1.2.3 From 0470466dbafd1db0815bb884d26a6be431e19f96 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 30 Nov 2006 11:46:22 +1100 Subject: [POWERPC] Fix cputable.h for combined build Remove CPU_FTR_16M_PAGE from the cupfeatures mask at runtime on iSeries. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- include/asm-powerpc/cputable.h | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 354f66da9dc..6fe5c9d4ca3 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -155,16 +155,9 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #ifndef __ASSEMBLY__ -#define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \ - CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ - CPU_FTR_NODSISRALIGN) - -/* iSeries doesn't support large pages */ -#ifdef CONFIG_PPC_ISERIES -#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_PPCAS_ARCH_V2_BASE) -#else -#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_PPCAS_ARCH_V2_BASE | CPU_FTR_16M_PAGE) -#endif /* CONFIG_PPC_ISERIES */ +#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \ + CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE) /* We only set the altivec features if the kernel was compiled with altivec * support -- cgit v1.2.3 From 25a31e2df0ee22bdc23494371db9e858b3a23471 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Thu, 30 Nov 2006 10:25:23 +0100 Subject: [POWERPC] ppc: m48t35 add missing bracket Add missing bracket in definition for m48t35 RTC chip. Signed-off-by: Mariusz Kozlowski Signed-off-by: Paul Mackerras --- include/asm-ppc/m48t35.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-ppc/m48t35.h b/include/asm-ppc/m48t35.h index f3c5e5dfa98..a5277ea4b19 100644 --- a/include/asm-ppc/m48t35.h +++ b/include/asm-ppc/m48t35.h @@ -39,7 +39,7 @@ #define M48T35_RTC_WATCHDOG_RB 0x03 #define M48T35_RTC_WATCHDOG_BMB 0x7c #define M48T35_RTC_WATCHDOG_WDS 0x80 -#define M48T35_RTC_WATCHDOG_ALL (M48T35_RTC_WATCHDOG_RB|M48T35_RTC_WATCHDOG_BMB|M48T35_RTC_W +#define M48T35_RTC_WATCHDOG_ALL (M48T35_RTC_WATCHDOG_RB|M48T35_RTC_WATCHDOG_BMB|M48T35_RTC_W) #define M48T35_RTC_CONTROL_WRITE 0x80 #define M48T35_RTC_CONTROL_READ 0x40 -- cgit v1.2.3 From f7675ad791df4bec2b9d21bcc0f846320f0a921b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:39:55 +0100 Subject: [S390] Add __must_check to uaccess functions. Follow other architectures and add __must_check to uaccess functions. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/uaccess.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h index 72ae4efddb4..73ac4e82217 100644 --- a/include/asm-s390/uaccess.h +++ b/include/asm-s390/uaccess.h @@ -201,7 +201,7 @@ extern int __get_user_bad(void) __attribute__((noreturn)); * Returns number of bytes that could not be copied. * On success, this will be zero. */ -static inline unsigned long +static inline unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n) { if (__builtin_constant_p(n) && (n <= 256)) @@ -226,7 +226,7 @@ __copy_to_user(void __user *to, const void *from, unsigned long n) * Returns number of bytes that could not be copied. * On success, this will be zero. */ -static inline unsigned long +static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n) { might_sleep(); @@ -252,7 +252,7 @@ copy_to_user(void __user *to, const void *from, unsigned long n) * If some data could not be copied, this function will pad the copied * data to the requested size using zero bytes. */ -static inline unsigned long +static inline unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n) { if (__builtin_constant_p(n) && (n <= 256)) @@ -277,7 +277,7 @@ __copy_from_user(void *to, const void __user *from, unsigned long n) * If some data could not be copied, this function will pad the copied * data to the requested size using zero bytes. */ -static inline unsigned long +static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) { might_sleep(); @@ -288,13 +288,13 @@ copy_from_user(void *to, const void __user *from, unsigned long n) return n; } -static inline unsigned long +static inline unsigned long __must_check __copy_in_user(void __user *to, const void __user *from, unsigned long n) { return uaccess.copy_in_user(n, to, from); } -static inline unsigned long +static inline unsigned long __must_check copy_in_user(void __user *to, const void __user *from, unsigned long n) { might_sleep(); @@ -306,7 +306,7 @@ copy_in_user(void __user *to, const void __user *from, unsigned long n) /* * Copy a null terminated string from userspace. */ -static inline long +static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) { long res = -EFAULT; @@ -343,13 +343,13 @@ strnlen_user(const char __user * src, unsigned long n) * Zero Userspace */ -static inline unsigned long +static inline unsigned long __must_check __clear_user(void __user *to, unsigned long n) { return uaccess.clear_user(n, to); } -static inline unsigned long +static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) { might_sleep(); -- cgit v1.2.3 From bba125a6116e51faff98df1906bf77d06b644aea Mon Sep 17 00:00:00 2001 From: Ralph Wuerthner Date: Mon, 4 Dec 2006 15:40:00 +0100 Subject: [S390] update interface notes in zcrypt.h Signed-off-by: Ralph Wuerthner Signed-off-by: Martin Schwidefsky --- include/asm-s390/zcrypt.h | 91 +++++++++++++++++++++-------------------------- 1 file changed, 41 insertions(+), 50 deletions(-) (limited to 'include') diff --git a/include/asm-s390/zcrypt.h b/include/asm-s390/zcrypt.h index 7244c68464f..b90e55888a5 100644 --- a/include/asm-s390/zcrypt.h +++ b/include/asm-s390/zcrypt.h @@ -180,40 +180,8 @@ struct ica_xcRB { * for the implementation details for the contents of the * block * - * Z90STAT_TOTALCOUNT - * Return an integer count of all device types together. - * - * Z90STAT_PCICACOUNT - * Return an integer count of all PCICAs. - * - * Z90STAT_PCICCCOUNT - * Return an integer count of all PCICCs. - * - * Z90STAT_PCIXCCMCL2COUNT - * Return an integer count of all MCL2 PCIXCCs. - * - * Z90STAT_PCIXCCMCL3COUNT - * Return an integer count of all MCL3 PCIXCCs. - * - * Z90STAT_CEX2CCOUNT - * Return an integer count of all CEX2Cs. - * - * Z90STAT_CEX2ACOUNT - * Return an integer count of all CEX2As. - * - * Z90STAT_REQUESTQ_COUNT - * Return an integer count of the number of entries waiting to be - * sent to a device. - * - * Z90STAT_PENDINGQ_COUNT - * Return an integer count of the number of entries sent to a - * device awaiting the reply. - * - * Z90STAT_TOTALOPEN_COUNT - * Return an integer count of the number of open file handles. - * - * Z90STAT_DOMAIN_INDEX - * Return the integer value of the Cryptographic Domain. + * ZSECSENDCPRB + * Send an arbitrary CPRB to a crypto card. * * Z90STAT_STATUS_MASK * Return an 64 element array of unsigned chars for the status of @@ -235,28 +203,51 @@ struct ica_xcRB { * of successfully completed requests per device since the device * was detected and made available. * - * ICAZ90STATUS (deprecated) + * Z90STAT_REQUESTQ_COUNT + * Return an integer count of the number of entries waiting to be + * sent to a device. + * + * Z90STAT_PENDINGQ_COUNT + * Return an integer count of the number of entries sent to all + * devices awaiting the reply. + * + * Z90STAT_TOTALOPEN_COUNT + * Return an integer count of the number of open file handles. + * + * Z90STAT_DOMAIN_INDEX + * Return the integer value of the Cryptographic Domain. + * + * The following ioctls are deprecated and should be no longer used: + * + * Z90STAT_TOTALCOUNT + * Return an integer count of all device types together. + * + * Z90STAT_PCICACOUNT + * Return an integer count of all PCICAs. + * + * Z90STAT_PCICCCOUNT + * Return an integer count of all PCICCs. + * + * Z90STAT_PCIXCCMCL2COUNT + * Return an integer count of all MCL2 PCIXCCs. + * + * Z90STAT_PCIXCCMCL3COUNT + * Return an integer count of all MCL3 PCIXCCs. + * + * Z90STAT_CEX2CCOUNT + * Return an integer count of all CEX2Cs. + * + * Z90STAT_CEX2ACOUNT + * Return an integer count of all CEX2As. + * + * ICAZ90STATUS * Return some device driver status in a ica_z90_status struct * This takes an ica_z90_status struct as its arg. * - * NOTE: this ioctl() is deprecated, and has been replaced with - * single ioctl()s for each type of status being requested - * - * Z90STAT_PCIXCCCOUNT (deprecated) + * Z90STAT_PCIXCCCOUNT * Return an integer count of all PCIXCCs (MCL2 + MCL3). * This is DEPRECATED now that MCL3 PCIXCCs are treated differently from * MCL2 PCIXCCs. - * - * Z90QUIESCE (not recommended) - * Quiesce the driver. This is intended to stop all new - * requests from being processed. Its use is NOT recommended, - * except in circumstances where there is no other way to stop - * callers from accessing the driver. Its original use was to - * allow the driver to be "drained" of work in preparation for - * a system shutdown. - * - * NOTE: once issued, this ban on new work cannot be undone - * except by unloading and reloading the driver. */ /** -- cgit v1.2.3 From 654452a48aa2bbfa276016a1e35d8988ff991ebb Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:02 +0100 Subject: [S390] termio <-> termios conversion error handling. Get rid of our own user_termio_to_kernel_termios() and kernel_termios_to_user_termio() macros which didn't check for errors on user space accesses. Instead use the generic functions which handle this properly. In addition the generic version of user_termio_to_kernel_termios() also copies the c_line member which was missing in our variant. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/termios.h | 34 +--------------------------------- 1 file changed, 1 insertion(+), 33 deletions(-) (limited to 'include') diff --git a/include/asm-s390/termios.h b/include/asm-s390/termios.h index d1e29cca54c..62b23caf370 100644 --- a/include/asm-s390/termios.h +++ b/include/asm-s390/termios.h @@ -75,39 +75,7 @@ struct termio { */ #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - (termios)->x = (0xffff0000 & ((termios)->x)) | __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#include #endif /* __KERNEL__ */ -- cgit v1.2.3 From 15e9b586e0bd3692e2a21c5be178810d9d32214e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:26 +0100 Subject: [S390] Reset infrastructure for re-IPL. In case of re-IPL and diag308 doesn't work we have to reset all devices manually and wait synchronously that each reset finished. This patch adds the necessary infrastucture and the first exploiter of it. Subsystems that need to add a function that needs to be called at re-IPL may register/unregister this function via struct reset_call { struct reset_call *next; void (*fn)(void); }; void register_reset_call(struct reset_call *reset); void unregister_reset_call(struct reset_call *reset); When the registered function get called the context is: - all cpus beside the current one are stopped - all machine checks and interrupts are disabled - prefixing is disabled - a default machine check handler is available for use The registered functions may not take any locks are sleep. For the common I/O layer part of this patch: Introduce a reset_call css_reset that does the following: - clear all subchannels - perform a rchp on all channel paths and wait for the resulting machine checks This replaces the calls to clear_all_subchannels() and cio_reset_channel_paths() for kexec and ccw reipl. reipl_ccw_dev() now uses reipl_find_schid() to determine the subchannel id for a given device id. Also remove cio_reset_channel_paths() and friends since they are not needed anymore. Signed-off-by: Heiko Carstens Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- include/asm-s390/cio.h | 4 ---- include/asm-s390/lowcore.h | 8 ++++++++ include/asm-s390/reset.h | 23 +++++++++++++++++++++++ 3 files changed, 31 insertions(+), 4 deletions(-) create mode 100644 include/asm-s390/reset.h (limited to 'include') diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h index 81287d86329..cabd5bb74b5 100644 --- a/include/asm-s390/cio.h +++ b/include/asm-s390/cio.h @@ -285,10 +285,6 @@ extern int diag210(struct diag210 *addr); extern void wait_cons_dev(void); -extern void clear_all_subchannels(void); - -extern void cio_reset_channel_paths(void); - extern void css_schedule_reprobe(void); extern void reipl_ccw_dev(struct ccw_dev_id *id); diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h index 06583ed0bde..74f7389bd3e 100644 --- a/include/asm-s390/lowcore.h +++ b/include/asm-s390/lowcore.h @@ -362,6 +362,14 @@ static inline void set_prefix(__u32 address) asm volatile("spx %0" : : "m" (address) : "memory"); } +static inline __u32 store_prefix(void) +{ + __u32 address; + + asm volatile("stpx %0" : "=m" (address)); + return address; +} + #define __PANIC_MAGIC 0xDEADC0DE #endif diff --git a/include/asm-s390/reset.h b/include/asm-s390/reset.h new file mode 100644 index 00000000000..9b439cf6780 --- /dev/null +++ b/include/asm-s390/reset.h @@ -0,0 +1,23 @@ +/* + * include/asm-s390/reset.h + * + * Copyright IBM Corp. 2006 + * Author(s): Heiko Carstens + */ + +#ifndef _ASM_S390_RESET_H +#define _ASM_S390_RESET_H + +#include + +struct reset_call { + struct list_head list; + void (*fn)(void); +}; + +extern void register_reset_call(struct reset_call *reset); +extern void unregister_reset_call(struct reset_call *reset); +extern void s390_reset_system(void); +extern void (*s390_reset_mcck_handler)(void); + +#endif /* _ASM_S390_RESET_H */ -- cgit v1.2.3 From a1a392f0b4f27604811bf8aa8d7636b3b4bc3803 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:28 +0100 Subject: [S390] Bad kexec control page allocation. KEXEC_CONTROL_MEMORY_LIMIT is an unsigned long value and therefore should be defined as one. Otherwise the kexec control page can be allocated above 2GB which will cause a specification exception on the sam31 instruction in the s390 kexec relocation code. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/kexec.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-s390/kexec.h b/include/asm-s390/kexec.h index ce28ddda0f5..9c35c8ad1af 100644 --- a/include/asm-s390/kexec.h +++ b/include/asm-s390/kexec.h @@ -26,7 +26,7 @@ /* Maximum address we can use for the control pages */ /* Not more than 2GB */ -#define KEXEC_CONTROL_MEMORY_LIMIT (1<<31) +#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31) /* Allocate one page for the pdp and the second for the code */ #define KEXEC_CONTROL_CODE_SIZE 4096 -- cgit v1.2.3 From 740b5706b9c4b3767f597b3ea76654c6f2a800b2 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:30 +0100 Subject: [S390] cpcmd <-> __cpcmd calling issues In case of reipl cpcmd gets called when all other cpus are not running anymore. To prevent deadlocks change __cpcmd so that it doesn't take any locks and call cpcmd or __cpcmd, whatever is correct in the current context. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/cpcmd.h | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/asm-s390/cpcmd.h b/include/asm-s390/cpcmd.h index 1fcf65be7a2..48a9eab1642 100644 --- a/include/asm-s390/cpcmd.h +++ b/include/asm-s390/cpcmd.h @@ -7,8 +7,8 @@ * Christian Borntraeger (cborntra@de.ibm.com), */ -#ifndef __CPCMD__ -#define __CPCMD__ +#ifndef _ASM_S390_CPCMD_H +#define _ASM_S390_CPCMD_H /* * the lowlevel function for cpcmd @@ -16,9 +16,6 @@ */ extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code); -#ifndef __s390x__ -#define cpcmd __cpcmd -#else /* * cpcmd is the in-kernel interface for issuing CP commands * @@ -33,6 +30,5 @@ extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code * NOTE: If the response buffer is not below 2 GB, cpcmd can sleep */ extern int cpcmd(const char *cmd, char *response, int rlen, int *response_code); -#endif /*__s390x__*/ -#endif +#endif /* _ASM_S390_CPCMD_H */ -- cgit v1.2.3 From c6b5b847a7cf11f131c43fe0041443ec11697fc7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:33 +0100 Subject: [S390] cpu shutdown rework Let one master cpu kill all other cpus instead of sending an external interrupt to all other cpus so they can kill themselves. Simplifies reipl/shutdown functions a lot. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/smp.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h index c3cf030ada4..7097c96ed02 100644 --- a/include/asm-s390/smp.h +++ b/include/asm-s390/smp.h @@ -18,6 +18,7 @@ #include #include +#include /* s390 specific smp.c headers @@ -101,6 +102,13 @@ smp_call_function_on(void (*func) (void *info), void *info, func(info); return 0; } + +static inline void smp_send_stop(void) +{ + /* Disable all interrupts/machine checks */ + __load_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK); +} + #define smp_cpu_not_running(cpu) 1 #define smp_get_cpu(cpu) ({ 0; }) #define smp_put_cpu(cpu) ({ 0; }) -- cgit v1.2.3 From 36a2bd425d9b3ba2a40b0653e08d17702c78558e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:38 +0100 Subject: [S390] Cleanup memory_chunk array usage. Need this at yet another file and don't want to add yet another extern... Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/setup.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index 5d72eda8a11..7664bacdd83 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -2,7 +2,7 @@ * include/asm-s390/setup.h * * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Copyright IBM Corp. 1999,2006 */ #ifndef _ASM_S390_SETUP_H @@ -30,6 +30,17 @@ #endif /* __s390x__ */ #define COMMAND_LINE ((char *) (0x10480)) +#define CHUNK_READ_WRITE 0 +#define CHUNK_READ_ONLY 1 + +struct mem_chunk { + unsigned long addr; + unsigned long size; + unsigned long type; +}; + +extern struct mem_chunk memory_chunk[]; + /* * Machine features detected in head.S */ @@ -53,7 +64,6 @@ extern unsigned long machine_flags; #define MACHINE_HAS_MVCOS (machine_flags & 512) #endif /* __s390x__ */ - #define MACHINE_HAS_SCLP (!MACHINE_IS_P390) /* @@ -71,7 +81,6 @@ extern unsigned int console_irq; #define SET_CONSOLE_3215 do { console_mode = 2; } while (0) #define SET_CONSOLE_3270 do { console_mode = 3; } while (0) - struct ipl_list_hdr { u32 len; u8 reserved1[3]; -- cgit v1.2.3 From 29b08d2bae854f66d3cfd5f57aaf2e7c2c7fce32 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:40 +0100 Subject: [S390] pfault code cleanup. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/system.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h index ccbafe4bf2c..bd0b05ae87d 100644 --- a/include/asm-s390/system.h +++ b/include/asm-s390/system.h @@ -115,6 +115,16 @@ extern void account_system_vtime(struct task_struct *); #define account_vtime(x) do { /* empty */ } while (0) #endif +#ifdef CONFIG_PFAULT +extern void pfault_irq_init(void); +extern int pfault_init(void); +extern void pfault_fini(void); +#else /* CONFIG_PFAULT */ +#define pfault_irq_init() do { } while (0) +#define pfault_init() ({-1;}) +#define pfault_fini() do { } while (0) +#endif /* CONFIG_PFAULT */ + #define finish_arch_switch(prev) do { \ set_fs(current->thread.mm_segment); \ account_vtime(prev); \ -- cgit v1.2.3 From ce26a8532fd062ccd3f3c589a4be269a2dc20f00 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Mon, 4 Dec 2006 15:40:54 +0100 Subject: [S390] cio: Make ccw_dev_id_is_equal() more robust. Using memcmp to compare ccw_dev_id implies that the whole structure (incl. padding) has always been completely initialized to sane values. Comparing the structures field by field doesn't make such assumptions. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- include/asm-s390/cio.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h index cabd5bb74b5..d9278503098 100644 --- a/include/asm-s390/cio.h +++ b/include/asm-s390/cio.h @@ -278,7 +278,10 @@ struct ccw_dev_id { static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1, struct ccw_dev_id *dev_id2) { - return !memcmp(dev_id1, dev_id2, sizeof(struct ccw_dev_id)); + if ((dev_id1->ssid == dev_id2->ssid) && + (dev_id1->devno == dev_id2->devno)) + return 1; + return 0; } extern int diag210(struct diag210 *addr); -- cgit v1.2.3 From 8b62bc9642300471737bc3b77b2a4a2ead46dedb Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Dec 2006 15:40:56 +0100 Subject: [S390] Memory detection fixes. VMALLOC_END on 31bit should be 0x8000000UL instead of 0x7fffffffL. The page mask which is used to make sure memory_end is on 4MB/2MB boundary is wrong and not needed. Therefore remove it. Make sure a vmalloc area does also exist and work on (future) machines with 4TB and more memory. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/pgtable.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index 36bb6dacf00..2d968a69ed1 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -110,13 +110,22 @@ extern char empty_zero_page[PAGE_SIZE]; #define VMALLOC_OFFSET (8*1024*1024) #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) \ & ~(VMALLOC_OFFSET-1)) + +/* + * We need some free virtual space to be able to do vmalloc. + * VMALLOC_MIN_SIZE defines the minimum size of the vmalloc + * area. On a machine with 2GB memory we make sure that we + * have at least 128MB free space for vmalloc. On a machine + * with 4TB we make sure we have at least 1GB. + */ #ifndef __s390x__ -# define VMALLOC_END (0x7fffffffL) +#define VMALLOC_MIN_SIZE 0x8000000UL +#define VMALLOC_END 0x80000000UL #else /* __s390x__ */ -# define VMALLOC_END (0x40000000000L) +#define VMALLOC_MIN_SIZE 0x40000000UL +#define VMALLOC_END 0x40000000000UL #endif /* __s390x__ */ - /* * A 31 bit pagetable entry of S390 has following format: * | PFRA | | OS | -- cgit v1.2.3 From 5a31be3fb52c276b4913bd89e77481fae0001510 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 4 Dec 2006 17:27:36 +1000 Subject: [PATCH] m68knommu: memory register defines for 520x ColdFire CPU's Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. (This part of the patch if the memory register defines for the 520x ColdFire CPU family - Greg). Signed-off-by: Michael Broughton Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- include/asm-m68knommu/m520xsim.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-m68knommu/m520xsim.h b/include/asm-m68knommu/m520xsim.h index 1dac22ea95b..49d016e6391 100644 --- a/include/asm-m68knommu/m520xsim.h +++ b/include/asm-m68knommu/m520xsim.h @@ -31,6 +31,16 @@ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ +/* + * SDRAM configuration registers. + */ +#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ +#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ +#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ +#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ +#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ +#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ + #define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_FECI2C (0xA4033) @@ -47,7 +57,7 @@ #define ICR_INTRCONF 0x05 #define MCFPIT_IMR MCFINTC_IMRL -#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) +#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) /****************************************************************************/ #endif /* m520xsim_h */ -- cgit v1.2.3 From 04a9f081b76f536bcf69db066153c2a4231d5783 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 4 Dec 2006 17:27:58 +1000 Subject: [PATCH] m68knommu: fix dma-mapping.h Make the m68knommu DMA handling consistent with other architectures. Compile problems pointed out by Adrian Bunk Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- include/asm-m68knommu/dma-mapping.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-m68knommu/dma-mapping.h b/include/asm-m68knommu/dma-mapping.h index 5622b855a57..6aeab18e58b 100644 --- a/include/asm-m68knommu/dma-mapping.h +++ b/include/asm-m68knommu/dma-mapping.h @@ -1,9 +1,10 @@ #ifndef _M68KNOMMU_DMA_MAPPING_H #define _M68KNOMMU_DMA_MAPPING_H - #ifdef CONFIG_PCI #include +#else +#include #endif #endif /* _M68KNOMMU_DMA_MAPPING_H */ -- cgit v1.2.3 From f75e3b1de6a72f6eb22f3ab120dd52b902357c03 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 4 Dec 2006 17:28:03 +1000 Subject: [PATCH] m68knommu: fix missing bracket in scatterlist.h This patch adds missing bracket. Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- include/asm-m68knommu/scatterlist.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h index 12309b181d2..2085d6ff878 100644 --- a/include/asm-m68knommu/scatterlist.h +++ b/include/asm-m68knommu/scatterlist.h @@ -10,7 +10,7 @@ struct scatterlist { unsigned int length; }; -#define sg_address(sg) (page_address((sg)->page) + (sg)->offset +#define sg_address(sg) (page_address((sg)->page) + (sg)->offset) #define sg_dma_address(sg) ((sg)->dma_address) #define sg_dma_len(sg) ((sg)->length) -- cgit v1.2.3 From 0c789ff64e874bbece03b607f200566ab24ea9ab Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 4 Dec 2006 10:52:29 -0800 Subject: netfilter.h needs rcuupdate.h for RCU locking functions This was exposed by Al's recent header file dependency reduction patches.. Cc: Al Viro Cc: David S. Miller Signed-off-by: Linus Torvalds --- include/linux/netfilter.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index d4c4c5120bc..9389cf7d406 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -11,6 +11,7 @@ #include #endif #include +#include /* Responses from hook functions. */ #define NF_DROP 0 -- cgit v1.2.3 From a80958f4849316a18c06f75b9e850ccecbf20df8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 4 Dec 2006 20:41:19 +0000 Subject: [PATCH] fix fallout from header dependency trimming OK, that seems to be enough to deal with the mess. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/kernelcapi.h | 1 + include/linux/netfilter.h | 1 - include/linux/skbuff.h | 1 + 3 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h index f8a0ff86dac..aea34e74c49 100644 --- a/include/linux/kernelcapi.h +++ b/include/linux/kernelcapi.h @@ -48,6 +48,7 @@ typedef struct kcapi_carddef { #include #include #include +#include #define KCI_CONTRUP 0 /* arg: struct capi_profile */ #define KCI_CONTRDOWN 1 /* arg: NULL */ diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 9389cf7d406..d4c4c5120bc 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -11,7 +11,6 @@ #include #endif #include -#include /* Responses from hook functions. */ #define NF_DROP 0 diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6bdff9b148d..a05a5f7c0b7 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -25,6 +25,7 @@ #include #include #include +#include #include #define HAVE_ALLOC_SKB /* For the drivers to know */ -- cgit v1.2.3 From 9567772f14f6d2692ea88ddc111a5a6b352fd512 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Thu, 30 Nov 2006 10:16:29 +0100 Subject: [MIPS] klconfig add missing bracket Signed-off-by: Mariusz Kozlowski Signed-off-by: Ralf Baechle --- include/asm-mips/sn/klconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h index b63cd0655b3..15d70ca5618 100644 --- a/include/asm-mips/sn/klconfig.h +++ b/include/asm-mips/sn/klconfig.h @@ -176,7 +176,7 @@ typedef struct kl_config_hdr { /* --- New Macros for the changed kl_config_hdr_t structure --- */ #define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ - (unsigned long)_k + (_k->ch_malloc_hdr_off))) + ((unsigned long)_k + (_k->ch_malloc_hdr_off))) #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) -- cgit v1.2.3 From 05e4396651ca1cac51d8da9ff4992741c9dc1e39 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 7 Nov 2006 18:02:44 +0900 Subject: [MIPS] Use SYSVIPC_COMPAT to fix various problems on N32 N32 SysV IPC system calls should use 32-bit compatible code. arch/mips/kernel/linux32.c have similar compatible code for O32, but ipc/compat.c seems more complete. We can use it for both N32 and O32. This patch should fix these problems (and other possible problems): http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1149188824.6986.6.camel%40diimka-laptop http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=44C6B829.8050508%40caviumnetworks.com Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/compat.h | 68 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) (limited to 'include') diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h index 900f472fdd2..55a0152feb0 100644 --- a/include/asm-mips/compat.h +++ b/include/asm-mips/compat.h @@ -32,6 +32,7 @@ typedef struct { s32 val[2]; } compat_fsid_t; typedef s32 compat_timer_t; +typedef s32 compat_key_t; typedef s32 compat_int_t; typedef s32 compat_long_t; @@ -146,4 +147,71 @@ static inline void __user *compat_alloc_user_space(long len) return (void __user *) (regs->regs[29] - len); } +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid32_t uid; + __compat_gid32_t gid; + __compat_uid32_t cuid; + __compat_gid32_t cgid; + compat_mode_t mode; + unsigned short seq; + unsigned short __pad2; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + compat_time_t sem_otime; + compat_time_t sem_ctime; + compat_ulong_t sem_nsems; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused1; +#endif + compat_time_t msg_stime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused1; +#endif +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused2; +#endif + compat_time_t msg_rtime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused2; +#endif +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused3; +#endif + compat_time_t msg_ctime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused3; +#endif + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + compat_size_t shm_segsz; + compat_time_t shm_atime; + compat_time_t shm_dtime; + compat_time_t shm_ctime; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + #endif /* _ASM_COMPAT_H */ -- cgit v1.2.3 From 4f8b5c70967de5fd27f2092f1f8da47f4705bb67 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 30 Nov 2006 15:38:10 +0000 Subject: [MIPS] Fix atomic.h build errors. For the definition of atomic64_t atomic.h was relying on having been included previously. Before changeset d89d8e0637a5e4e0a12e90c4bc934d0d4c335239 this was happening as a side effect of including . Signed-off-by: Ralf Baechle --- include/asm-mips/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index 7978d8e1164..365767074c7 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -375,7 +375,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) #ifdef CONFIG_64BIT -typedef struct { volatile __s64 counter; } atomic64_t; +typedef struct { volatile long counter; } atomic64_t; #define ATOMIC64_INIT(i) { (i) } -- cgit v1.2.3 From 0004a9dfeaa709a7f853487aba19932c9b1a87c8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 31 Oct 2006 03:45:07 +0000 Subject: [MIPS] Cleanup memory barriers for weakly ordered systems. Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync needed. Signed-off-by: Ralf Baechle --- include/asm-mips/atomic.h | 37 +++++++---- include/asm-mips/barrier.h | 132 +++++++++++++++++++++++++++++++++++++ include/asm-mips/bitops.h | 27 +++----- include/asm-mips/futex.h | 22 ++++--- include/asm-mips/spinlock.h | 53 ++++++++------- include/asm-mips/system.h | 156 +++----------------------------------------- 6 files changed, 218 insertions(+), 209 deletions(-) create mode 100644 include/asm-mips/barrier.h (limited to 'include') diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index 365767074c7..c1a2409bb52 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -15,6 +15,7 @@ #define _ASM_ATOMIC_H #include +#include #include #include @@ -130,6 +131,8 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) { unsigned long result; + smp_mb(); + if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long temp; @@ -140,7 +143,6 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) " sc %0, %2 \n" " beqzl %0, 1b \n" " addu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -155,7 +157,6 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) " sc %0, %2 \n" " beqz %0, 1b \n" " addu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -170,6 +171,8 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) local_irq_restore(flags); } + smp_mb(); + return result; } @@ -177,6 +180,8 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) { unsigned long result; + smp_mb(); + if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long temp; @@ -187,7 +192,6 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) " sc %0, %2 \n" " beqzl %0, 1b \n" " subu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -202,7 +206,6 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) " sc %0, %2 \n" " beqz %0, 1b \n" " subu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -217,6 +220,8 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) local_irq_restore(flags); } + smp_mb(); + return result; } @@ -232,6 +237,8 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) { unsigned long result; + smp_mb(); + if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long temp; @@ -245,7 +252,6 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) " beqzl %0, 1b \n" " subu %0, %1, %3 \n" " .set reorder \n" - " sync \n" "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) @@ -264,7 +270,6 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) " beqz %0, 1b \n" " subu %0, %1, %3 \n" " .set reorder \n" - " sync \n" "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) @@ -281,6 +286,8 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) local_irq_restore(flags); } + smp_mb(); + return result; } @@ -484,6 +491,8 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) { unsigned long result; + smp_mb(); + if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long temp; @@ -494,7 +503,6 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) " scd %0, %2 \n" " beqzl %0, 1b \n" " addu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -509,7 +517,6 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) " scd %0, %2 \n" " beqz %0, 1b \n" " addu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -524,6 +531,8 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) local_irq_restore(flags); } + smp_mb(); + return result; } @@ -531,6 +540,8 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) { unsigned long result; + smp_mb(); + if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long temp; @@ -541,7 +552,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) " scd %0, %2 \n" " beqzl %0, 1b \n" " subu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -556,7 +566,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) " scd %0, %2 \n" " beqz %0, 1b \n" " subu %0, %1, %3 \n" - " sync \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -571,6 +580,8 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) local_irq_restore(flags); } + smp_mb(); + return result; } @@ -586,6 +597,8 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) { unsigned long result; + smp_mb(); + if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long temp; @@ -599,7 +612,6 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) " beqzl %0, 1b \n" " dsubu %0, %1, %3 \n" " .set reorder \n" - " sync \n" "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) @@ -618,7 +630,6 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) " beqz %0, 1b \n" " dsubu %0, %1, %3 \n" " .set reorder \n" - " sync \n" "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) @@ -635,6 +646,8 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) local_irq_restore(flags); } + smp_mb(); + return result; } diff --git a/include/asm-mips/barrier.h b/include/asm-mips/barrier.h new file mode 100644 index 00000000000..ed82631b001 --- /dev/null +++ b/include/asm-mips/barrier.h @@ -0,0 +1,132 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_BARRIER_H +#define __ASM_BARRIER_H + +/* + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + */ + +#define read_barrier_depends() do { } while(0) +#define smp_read_barrier_depends() do { } while(0) + +#ifdef CONFIG_CPU_HAS_SYNC +#define __sync() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + ".set mips2\n\t" \ + "sync\n\t" \ + ".set pop" \ + : /* no output */ \ + : /* no input */ \ + : "memory") +#else +#define __sync() do { } while(0) +#endif + +#define __fast_iob() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "lw $0,%0\n\t" \ + "nop\n\t" \ + ".set pop" \ + : /* no output */ \ + : "m" (*(int *)CKSEG1) \ + : "memory") + +#define fast_wmb() __sync() +#define fast_rmb() __sync() +#define fast_mb() __sync() +#define fast_iob() \ + do { \ + __sync(); \ + __fast_iob(); \ + } while (0) + +#ifdef CONFIG_CPU_HAS_WB + +#include + +#define wmb() fast_wmb() +#define rmb() fast_rmb() +#define mb() wbflush() +#define iob() wbflush() + +#else /* !CONFIG_CPU_HAS_WB */ + +#define wmb() fast_wmb() +#define rmb() fast_rmb() +#define mb() fast_mb() +#define iob() fast_iob() + +#endif /* !CONFIG_CPU_HAS_WB */ + +#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP) +#define __WEAK_ORDERING_MB " sync \n" +#else +#define __WEAK_ORDERING_MB " \n" +#endif + +#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") +#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") +#define smp_wmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") + +#define set_mb(var, value) \ + do { var = value; smp_mb(); } while (0) + +#endif /* __ASM_BARRIER_H */ diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index b9007411b60..06445de1324 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 1994 - 1997, 1999, 2000 Ralf Baechle (ralf@gnu.org) + * Copyright (c) 1994 - 1997, 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org) * Copyright (c) 1999, 2000 Silicon Graphics, Inc. */ #ifndef _ASM_BITOPS_H @@ -12,6 +12,7 @@ #include #include #include +#include #include #include /* sigh ... */ #include @@ -204,9 +205,6 @@ static inline int test_and_set_bit(unsigned long nr, " " __SC "%2, %1 \n" " beqzl %2, 1b \n" " and %2, %0, %3 \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -226,9 +224,6 @@ static inline int test_and_set_bit(unsigned long nr, " " __SC "%2, %1 \n" " beqz %2, 1b \n" " and %2, %0, %3 \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -250,6 +245,8 @@ static inline int test_and_set_bit(unsigned long nr, return retval; } + + smp_mb(); } /* @@ -275,9 +272,6 @@ static inline int test_and_clear_bit(unsigned long nr, " " __SC "%2, %1 \n" " beqzl %2, 1b \n" " and %2, %0, %3 \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -298,9 +292,6 @@ static inline int test_and_clear_bit(unsigned long nr, " " __SC "%2, %1 \n" " beqz %2, 1b \n" " and %2, %0, %3 \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -322,6 +313,8 @@ static inline int test_and_clear_bit(unsigned long nr, return retval; } + + smp_mb(); } /* @@ -346,9 +339,6 @@ static inline int test_and_change_bit(unsigned long nr, " " __SC "%2, %1 \n" " beqzl %2, 1b \n" " and %2, %0, %3 \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -368,9 +358,6 @@ static inline int test_and_change_bit(unsigned long nr, " " __SC "\t%2, %1 \n" " beqz %2, 1b \n" " and %2, %0, %3 \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -391,6 +378,8 @@ static inline int test_and_change_bit(unsigned long nr, return retval; } + + smp_mb(); } #include diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h index ed023eae067..927a216bd53 100644 --- a/include/asm-mips/futex.h +++ b/include/asm-mips/futex.h @@ -1,19 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2006 Ralf Baechle (ralf@linux-mips.org) + */ #ifndef _ASM_FUTEX_H #define _ASM_FUTEX_H #ifdef __KERNEL__ #include +#include #include #include #include -#ifdef CONFIG_SMP -#define __FUTEX_SMP_SYNC " sync \n" -#else -#define __FUTEX_SMP_SYNC -#endif - #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ { \ if (cpu_has_llsc && R10000_LLSC_WAR) { \ @@ -27,7 +29,7 @@ " .set mips3 \n" \ "2: sc $1, %2 \n" \ " beqzl $1, 1b \n" \ - __FUTEX_SMP_SYNC \ + __WEAK_ORDERING_MB \ "3: \n" \ " .set pop \n" \ " .set mips0 \n" \ @@ -53,7 +55,7 @@ " .set mips3 \n" \ "2: sc $1, %2 \n" \ " beqz $1, 1b \n" \ - __FUTEX_SMP_SYNC \ + __WEAK_ORDERING_MB \ "3: \n" \ " .set pop \n" \ " .set mips0 \n" \ @@ -150,7 +152,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) " .set mips3 \n" "2: sc $1, %1 \n" " beqzl $1, 1b \n" - __FUTEX_SMP_SYNC + __WEAK_ORDERING_MB "3: \n" " .set pop \n" " .section .fixup,\"ax\" \n" @@ -177,7 +179,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) " .set mips3 \n" "2: sc $1, %1 \n" " beqz $1, 1b \n" - __FUTEX_SMP_SYNC + __WEAK_ORDERING_MB "3: \n" " .set pop \n" " .section .fixup,\"ax\" \n" diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h index c8d5587467b..fc3217fc111 100644 --- a/include/asm-mips/spinlock.h +++ b/include/asm-mips/spinlock.h @@ -3,12 +3,13 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000, 06 by Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #ifndef _ASM_SPINLOCK_H #define _ASM_SPINLOCK_H +#include #include /* @@ -40,7 +41,6 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) " sc %1, %0 \n" " beqzl %1, 1b \n" " nop \n" - " sync \n" " .set reorder \n" : "=m" (lock->lock), "=&r" (tmp) : "m" (lock->lock) @@ -53,19 +53,22 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) " li %1, 1 \n" " sc %1, %0 \n" " beqz %1, 1b \n" - " sync \n" + " nop \n" " .set reorder \n" : "=m" (lock->lock), "=&r" (tmp) : "m" (lock->lock) : "memory"); } + + smp_mb(); } static inline void __raw_spin_unlock(raw_spinlock_t *lock) { + smp_mb(); + __asm__ __volatile__( " .set noreorder # __raw_spin_unlock \n" - " sync \n" " sw $0, %0 \n" " .set\treorder \n" : "=m" (lock->lock) @@ -86,7 +89,6 @@ static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) " beqzl %2, 1b \n" " nop \n" " andi %2, %0, 1 \n" - " sync \n" " .set reorder" : "=&r" (temp), "=m" (lock->lock), "=&r" (res) : "m" (lock->lock) @@ -99,13 +101,14 @@ static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) " sc %2, %1 \n" " beqz %2, 1b \n" " andi %2, %0, 1 \n" - " sync \n" " .set reorder" : "=&r" (temp), "=m" (lock->lock), "=&r" (res) : "m" (lock->lock) : "memory"); } + smp_mb(); + return res == 0; } @@ -143,7 +146,6 @@ static inline void __raw_read_lock(raw_rwlock_t *rw) " sc %1, %0 \n" " beqzl %1, 1b \n" " nop \n" - " sync \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -156,12 +158,14 @@ static inline void __raw_read_lock(raw_rwlock_t *rw) " addu %1, 1 \n" " sc %1, %0 \n" " beqz %1, 1b \n" - " sync \n" + " nop \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) : "memory"); } + + smp_mb(); } /* Note the use of sub, not subu which will make the kernel die with an @@ -171,13 +175,14 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw) { unsigned int tmp; + smp_mb(); + if (R10000_LLSC_WAR) { __asm__ __volatile__( "1: ll %1, %2 # __raw_read_unlock \n" " sub %1, 1 \n" " sc %1, %0 \n" " beqzl %1, 1b \n" - " sync \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) : "memory"); @@ -188,7 +193,7 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw) " sub %1, 1 \n" " sc %1, %0 \n" " beqz %1, 1b \n" - " sync \n" + " nop \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -208,7 +213,7 @@ static inline void __raw_write_lock(raw_rwlock_t *rw) " lui %1, 0x8000 \n" " sc %1, %0 \n" " beqzl %1, 1b \n" - " sync \n" + " nop \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -221,18 +226,22 @@ static inline void __raw_write_lock(raw_rwlock_t *rw) " lui %1, 0x8000 \n" " sc %1, %0 \n" " beqz %1, 1b \n" - " sync \n" + " nop \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) : "memory"); } + + smp_mb(); } static inline void __raw_write_unlock(raw_rwlock_t *rw) { + smp_mb(); + __asm__ __volatile__( - " sync # __raw_write_unlock \n" + " # __raw_write_unlock \n" " sw $0, %0 \n" : "=m" (rw->lock) : "m" (rw->lock) @@ -252,11 +261,10 @@ static inline int __raw_read_trylock(raw_rwlock_t *rw) " bnez %1, 2f \n" " addu %1, 1 \n" " sc %1, %0 \n" - " beqzl %1, 1b \n" " .set reorder \n" -#ifdef CONFIG_SMP - " sync \n" -#endif + " beqzl %1, 1b \n" + " nop \n" + __WEAK_ORDERING_MB " li %2, 1 \n" "2: \n" : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) @@ -271,10 +279,9 @@ static inline int __raw_read_trylock(raw_rwlock_t *rw) " addu %1, 1 \n" " sc %1, %0 \n" " beqz %1, 1b \n" + " nop \n" " .set reorder \n" -#ifdef CONFIG_SMP - " sync \n" -#endif + __WEAK_ORDERING_MB " li %2, 1 \n" "2: \n" : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) @@ -299,7 +306,8 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw) " lui %1, 0x8000 \n" " sc %1, %0 \n" " beqzl %1, 1b \n" - " sync \n" + " nop \n" + __WEAK_ORDERING_MB " li %2, 1 \n" " .set reorder \n" "2: \n" @@ -315,7 +323,8 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw) " lui %1, 0x8000 \n" " sc %1, %0 \n" " beqz %1, 1b \n" - " sync \n" + " nop \n" + __WEAK_ORDERING_MB " li %2, 1 \n" " .set reorder \n" "2: \n" diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index 3056feed5a3..9428057a50c 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle * Copyright (C) 1996 by Paul M. Antoine * Copyright (C) 1999 Silicon Graphics * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com @@ -16,132 +16,12 @@ #include #include +#include #include #include #include #include -/* - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - */ - -#define read_barrier_depends() do { } while(0) - -#ifdef CONFIG_CPU_HAS_SYNC -#define __sync() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - ".set mips2\n\t" \ - "sync\n\t" \ - ".set pop" \ - : /* no output */ \ - : /* no input */ \ - : "memory") -#else -#define __sync() do { } while(0) -#endif - -#define __fast_iob() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - "lw $0,%0\n\t" \ - "nop\n\t" \ - ".set pop" \ - : /* no output */ \ - : "m" (*(int *)CKSEG1) \ - : "memory") - -#define fast_wmb() __sync() -#define fast_rmb() __sync() -#define fast_mb() __sync() -#define fast_iob() \ - do { \ - __sync(); \ - __fast_iob(); \ - } while (0) - -#ifdef CONFIG_CPU_HAS_WB - -#include - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() wbflush() -#define iob() wbflush() - -#else /* !CONFIG_CPU_HAS_WB */ - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() fast_mb() -#define iob() fast_iob() - -#endif /* !CONFIG_CPU_HAS_WB */ - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define set_mb(var, value) \ -do { var = value; mb(); } while (0) /* * switch_to(n) should switch tasks to task nr n, first @@ -217,9 +97,6 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) " .set mips3 \n" " sc %2, %1 \n" " beqzl %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -235,9 +112,6 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) " .set mips3 \n" " sc %2, %1 \n" " beqz %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -251,6 +125,8 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } @@ -268,9 +144,6 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) " move %2, %z4 \n" " scd %2, %1 \n" " beqzl %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -284,9 +157,6 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) " move %2, %z4 \n" " scd %2, %1 \n" " beqz %2, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -300,6 +170,8 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } #else @@ -345,9 +217,6 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, " .set mips3 \n" " sc $1, %1 \n" " beqzl $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -365,9 +234,6 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, " .set mips3 \n" " sc $1, %1 \n" " beqz $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -383,6 +249,8 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } @@ -402,9 +270,6 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, " move $1, %z4 \n" " scd $1, %1 \n" " beqzl $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -420,9 +285,6 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, " move $1, %z4 \n" " scd $1, %1 \n" " beqz $1, 1b \n" -#ifdef CONFIG_SMP - " sync \n" -#endif "2: \n" " .set pop \n" : "=&r" (retval), "=R" (*m) @@ -438,6 +300,8 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, local_irq_restore(flags); /* implies memory barrier */ } + smp_mb(); + return retval; } #else -- cgit v1.2.3 From e62438630ca37539c8cc1553710bbfaa3cf960a7 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 4 Dec 2006 03:38:31 -0700 Subject: [PATCH] Centralise definitions of sector_t and blkcnt_t CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly good reason. Centralising the definition in linux/types.h means that arch maintainers don't need to bother adding it, as well as fixing the problem with x86-64 users being asked to make a decision that has absolutely no effect. The H8/300 porters seem particularly confused since I'm not aware of any microcontrollers that need to support 2TB filesystems. Signed-off-by: Matthew Wilcox Signed-off-by: Linus Torvalds --- include/asm-avr32/types.h | 5 ----- include/asm-h8300/types.h | 6 ------ include/asm-i386/types.h | 10 ---------- include/asm-mips/types.h | 10 ---------- include/asm-powerpc/types.h | 10 ---------- include/asm-s390/types.h | 10 ---------- include/asm-sh/types.h | 10 ---------- include/asm-x86_64/types.h | 3 --- include/linux/types.h | 14 +++++++++----- 9 files changed, 9 insertions(+), 69 deletions(-) (limited to 'include') diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h index 3f47db9675a..2bff153a32e 100644 --- a/include/asm-avr32/types.h +++ b/include/asm-avr32/types.h @@ -57,11 +57,6 @@ typedef unsigned long long u64; typedef u32 dma_addr_t; -#ifdef CONFIG_LBD -typedef u64 sector_t; -#define HAVE_SECTOR_T -#endif - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-h8300/types.h b/include/asm-h8300/types.h index da2402b8654..2a8b1b2be78 100644 --- a/include/asm-h8300/types.h +++ b/include/asm-h8300/types.h @@ -55,12 +55,6 @@ typedef unsigned long long u64; typedef u32 dma_addr_t; -#define HAVE_SECTOR_T -typedef u64 sector_t; - -#define HAVE_BLKCNT_T -typedef u64 blkcnt_t; - #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/include/asm-i386/types.h b/include/asm-i386/types.h index 4b4b295ccdb..ad0a55bd782 100644 --- a/include/asm-i386/types.h +++ b/include/asm-i386/types.h @@ -57,16 +57,6 @@ typedef u32 dma_addr_t; #endif typedef u64 dma64_addr_t; -#ifdef CONFIG_LBD -typedef u64 sector_t; -#define HAVE_SECTOR_T -#endif - -#ifdef CONFIG_LSF -typedef u64 blkcnt_t; -#define HAVE_BLKCNT_T -#endif - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h index 2b52e180c6f..63a13c5bd83 100644 --- a/include/asm-mips/types.h +++ b/include/asm-mips/types.h @@ -93,16 +93,6 @@ typedef unsigned long long phys_t; typedef unsigned long phys_t; #endif -#ifdef CONFIG_LBD -typedef u64 sector_t; -#define HAVE_SECTOR_T -#endif - -#ifdef CONFIG_LSF -typedef u64 blkcnt_t; -#define HAVE_BLKCNT_T -#endif - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h index d6fb56b8045..3b363757a2b 100644 --- a/include/asm-powerpc/types.h +++ b/include/asm-powerpc/types.h @@ -97,16 +97,6 @@ typedef struct { unsigned long env; } func_descr_t; -#ifdef CONFIG_LBD -typedef u64 sector_t; -#define HAVE_SECTOR_T -#endif - -#ifdef CONFIG_LSF -typedef u64 blkcnt_t; -#define HAVE_BLKCNT_T -#endif - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h index ae2951cc83a..fc5d7cf1932 100644 --- a/include/asm-s390/types.h +++ b/include/asm-s390/types.h @@ -87,16 +87,6 @@ typedef union { } subreg; } register_pair; -#ifdef CONFIG_LBD -typedef u64 sector_t; -#define HAVE_SECTOR_T -#endif - -#ifdef CONFIG_LSF -typedef u64 blkcnt_t; -#define HAVE_BLKCNT_T -#endif - #endif /* ! __s390x__ */ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h index 3c09dd4ca31..fd00dbb82f8 100644 --- a/include/asm-sh/types.h +++ b/include/asm-sh/types.h @@ -52,16 +52,6 @@ typedef unsigned long long u64; typedef u32 dma_addr_t; -#ifdef CONFIG_LBD -typedef u64 sector_t; -#define HAVE_SECTOR_T -#endif - -#ifdef CONFIG_LSF -typedef u64 blkcnt_t; -#define HAVE_BLKCNT_T -#endif - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-x86_64/types.h b/include/asm-x86_64/types.h index c86c2e6793e..2d4491aae28 100644 --- a/include/asm-x86_64/types.h +++ b/include/asm-x86_64/types.h @@ -48,9 +48,6 @@ typedef unsigned long long u64; typedef u64 dma64_addr_t; typedef u64 dma_addr_t; -typedef u64 sector_t; -#define HAVE_SECTOR_T - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/linux/types.h b/include/linux/types.h index 745c409ebbb..0351bf2fac8 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -136,15 +136,19 @@ typedef __s64 int64_t; * * Linux always considers sectors to be 512 bytes long independently * of the devices real block size. - * - * If required, asm/types.h can override it and define - * HAVE_SECTOR_T */ -#ifndef HAVE_SECTOR_T +#ifdef CONFIG_LBD +typedef u64 sector_t; +#else typedef unsigned long sector_t; #endif -#ifndef HAVE_BLKCNT_T +/* + * The type of the inode's block count. + */ +#ifdef CONFIG_LSF +typedef u64 blkcnt_t; +#else typedef unsigned long blkcnt_t; #endif -- cgit v1.2.3