From edbc25caaa492a82e19baa915f1f6b0a0db6554d Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Thu, 10 Jul 2008 16:29:37 -0500 Subject: PCI: remove dynids.use_driver_data The driver flag dynids.use_driver_data is almost consistently not set, and causes more problems than it solves. It was initially intended as a flag to indicate whether a driver's usage of driver_data had been carefully inspected and was ready for values from userspace. That audit was never done, so most drivers just get a 0 for driver_data when new IDs are added from userspace via sysfs. So remove the flag, allowing drivers to see the data directly (a followon patch validates the passed driver_data value against what the drivers expect). Acked-by: Greg Kroah-Hartman Acked-by: Jean Delvare Signed-off-by: Milton Miller Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index acf8f24037c..c989f58d09b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -347,7 +347,6 @@ struct pci_bus_region { struct pci_dynids { spinlock_t lock; /* protects list, index */ struct list_head list; /* for IDs added at runtime */ - unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */ }; /* ---------------------------------------------------------------- */ -- cgit v1.2.3 From 0235c4fc7fc6f621dc0dd89eba102ad5aa373390 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 18 Aug 2008 21:38:00 +0200 Subject: PCI PM: Introduce function pci_wake_from_d3 Many device drivers use the following sequence of statements to enable the device to wake up the system while being in the D3_hot or D3_cold low power state: pci_enable_wake(pdev, PCI_D3hot, 1); pci_enable_wake(pdev, PCI_D3cold, 1); However, the second call is not necessary if the first one succeeds (the ordering of the statements above doesn't matter here) and it may even be harmful, because we are not supposed to enable PME# after the wake-up power has been enabled for the device. To allow drivers to overcome this problem, introduce function pci_wake_from_d3() that will enable the device to wake up the system from any of D3_hot and D3_cold as long as the wake-up from at least one of them is supported. Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index c989f58d09b..f7e7dbc0919 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -644,6 +644,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); bool pci_pme_capable(struct pci_dev *dev, pci_power_t state); void pci_pme_active(struct pci_dev *dev, bool enable); int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable); +int pci_wake_from_d3(struct pci_dev *dev, bool enable); pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); -- cgit v1.2.3 From 16dbef4a831782466b10d4ae56837c5ba17d1948 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 15 Aug 2008 19:36:45 -0700 Subject: PCI: change MSI-x vector to 32bit We are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the cache for irq number should be 32 bit too. Signed-off-by: Yinghai Lu Cc: Andrew Vasquez Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index f7e7dbc0919..8a4d0bebc31 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -725,7 +725,7 @@ enum pci_dma_burst_strategy { }; struct msix_entry { - u16 vector; /* kernel uses to write allocated vector */ + u32 vector; /* kernel uses to write allocated vector */ u16 entry; /* driver uses to specify entry, OS writes */ }; -- cgit v1.2.3 From 37a84ec668ba251ae02cf2c2c664baf6b247ae1f Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Thu, 28 Aug 2008 15:40:59 -0700 Subject: x86/PCI: irq and pci_ids patch for Intel Ibex Peak DeviceIDs This patch updates the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs. The LPC Controller ID is set by Firmware within the range of 0x3b00-3b1f. This range is included in pci_ids.h using min and max values, and irq.c now has code to handle the range (in lieu of 32 additions to a SWITCH statement). The SMBus Controller ID is a fixed-value and will not change. Signed-off-by: Seth Heasley Acked-by: Jean Delvare Signed-off-by: Jesse Barnes --- include/linux/pci_ids.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 8edddc240e4..e5d344bfcb7 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2454,9 +2454,9 @@ #define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a #define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30 #define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 -#define PCI_DEVICE_ID_INTEL_PCH_0 0x3b10 -#define PCI_DEVICE_ID_INTEL_PCH_1 0x3b11 -#define PCI_DEVICE_ID_INTEL_PCH_2 0x3b30 +#define PCI_DEVICE_ID_INTEL_PCH_LPC_MIN 0x3b00 +#define PCI_DEVICE_ID_INTEL_PCH_LPC_MAX 0x3b1f +#define PCI_DEVICE_ID_INTEL_PCH_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 -- cgit v1.2.3 From c322b28a04c084a467a862766f74c40c917a721c Mon Sep 17 00:00:00 2001 From: "Zhao, Yu" Date: Mon, 13 Oct 2008 19:36:05 +0800 Subject: PCI: use same arg names in PCI_VDEVICE comment This cleanup makes the argument names in PCI_VDEVICE comment consistent with those used in its definition. Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- include/linux/pci.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 8a4d0bebc31..008005674b6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -455,8 +455,8 @@ struct pci_driver { /** * PCI_VDEVICE - macro used to describe a specific pci device in short form - * @vend: the vendor name - * @dev: the 16 bit PCI Device ID + * @vendor: the vendor name + * @device: the 16 bit PCI Device ID * * This macro is used to create a struct pci_device_id that matches a * specific PCI device. The subvendor, and subdevice fields will be set -- cgit v1.2.3 From 58c3a727cb73b75a9104d295f096cca12959a5a5 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Tue, 14 Oct 2008 14:02:53 +0800 Subject: PCI: support PCIe ARI capability This patch adds support for PCI Express Alternative Routing-ID Interpretation (ARI) capability. The ARI capability extends the Function Number field of the PCI Express Endpoint by reusing the Device Number which is otherwise hardwired to 0. With ARI, an Endpoint can have up to 256 functions. Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + include/linux/pci_regs.h | 14 ++++++++++++++ 2 files changed, 15 insertions(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 008005674b6..7e9a1f0715e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -214,6 +214,7 @@ struct pci_dev { unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; unsigned int msix_enabled:1; + unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; unsigned int is_pcie:1; pci_dev_flags_t dev_flags; diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 450684f7eaa..eb6686b88f9 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -419,6 +419,10 @@ #define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTSTA 32 /* Root Status */ +#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ +#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ /* Extended Capabilities (PCI-X 2.0 and Express) */ #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) @@ -429,6 +433,7 @@ #define PCI_EXT_CAP_ID_VC 2 #define PCI_EXT_CAP_ID_DSN 3 #define PCI_EXT_CAP_ID_PWR 4 +#define PCI_EXT_CAP_ID_ARI 14 /* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ @@ -536,5 +541,14 @@ #define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ #define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ +/* Alternative Routing-ID Interpretation */ +#define PCI_ARI_CAP 0x04 /* ARI Capability Register */ +#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */ +#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */ +#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */ +#define PCI_ARI_CTRL 0x06 /* ARI Control Register */ +#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ +#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ +#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ #endif /* LINUX_PCI_REGS_H */ -- cgit v1.2.3 From aa42d7c6138afdc54f74e971456a0fbfec16b77b Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 28 Sep 2008 16:36:11 -0700 Subject: PCI: introduce an pci_ioremap(pdev, barnr) function A common thing in many PCI drivers is to ioremap() an entire bar. This is a slightly fragile thing right now, needing both an address and a size, and many driver writers do.. various things there. This patch introduces an pci_ioremap() function taking just a PCI device struct and the bar number as arguments, and figures this all out itself, in one place. In addition, we can add various sanity checks to this function (the patch already checks to make sure that the bar in question really is a MEM bar; few to no drivers do that sort of thing). Hopefully with this type of API we get less chance of mistakes in drivers with ioremap() operations. Signed-off-by: Arjan van de Ven Signed-off-by: Jesse Barnes --- include/linux/pci.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 7e9a1f0715e..46ad282ffe4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1119,5 +1119,18 @@ static inline void pci_mmcfg_early_init(void) { } static inline void pci_mmcfg_late_init(void) { } #endif +static inline void * pci_ioremap_bar(struct pci_dev *pdev, int bar) +{ + /* + * Make sure the BAR is actually a memory resource, not an IO resource + */ + if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { + WARN_ON(1); + return NULL; + } + return ioremap_nocache(pci_resource_start(pdev, bar), + pci_resource_len(pdev, bar)); +} + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.3 From 0927678f55c9a50c296f7e6dae85e87b8236e155 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Sat, 18 Oct 2008 17:33:19 -0700 Subject: PCI: use pci_find_ext_capability everywhere Remove some open coded (and buggy) versions of pci_find_ext_capability in favor of the real routine in the PCI core. Tested-by: Tomasz Czernecki Acked-by: Andrew Vasquez Reviewed-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- include/linux/aer.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/aer.h b/include/linux/aer.h index f2518141de8..a2383a72356 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -18,10 +18,6 @@ static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) { return -EINVAL; } -static inline int pci_find_aer_capability(struct pci_dev *dev) -{ - return 0; -} static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev) { return -EINVAL; -- cgit v1.2.3 From 270c66be9b4a6f2be53ef3aec5dc8e7b07782ec9 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Sun, 19 Oct 2008 20:35:20 +0800 Subject: PCI: fix AER capability check The 'use pci_find_ext_capability everywhere' cleanup brought a new bug, which makes the AER stop working. Fix it by actually using find_ext_cap instead of just find_cap. Drop the unused config space size define while we're at it. Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- include/linux/aer.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/aer.h b/include/linux/aer.h index a2383a72356..f7df1eefc10 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -10,7 +10,6 @@ #if defined(CONFIG_PCIEAER) /* pci-e port driver needs this function to enable aer */ extern int pci_enable_pcie_error_reporting(struct pci_dev *dev); -extern int pci_find_aer_capability(struct pci_dev *dev); extern int pci_disable_pcie_error_reporting(struct pci_dev *dev); extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev); #else -- cgit v1.2.3 From 96499871f45b9126157b1a5c512d6e30f1635225 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 20 Oct 2008 19:45:43 +0200 Subject: PCI: fix pci_ioremap_bar() on s390 s390 doesn't have ioremap_*, so protect the definition of the new pci_ioremap_bar function with CONFIG_HAS_IOMEM to avoid build breakage. Acked-by: Arjan van de Ven Signed-off-by: Heiko Carstens Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 46ad282ffe4..085187be29c 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1119,6 +1119,7 @@ static inline void pci_mmcfg_early_init(void) { } static inline void pci_mmcfg_late_init(void) { } #endif +#ifdef CONFIG_HAS_IOMEM static inline void * pci_ioremap_bar(struct pci_dev *pdev, int bar) { /* @@ -1131,6 +1132,7 @@ static inline void * pci_ioremap_bar(struct pci_dev *pdev, int bar) return ioremap_nocache(pci_resource_start(pdev, bar), pci_resource_len(pdev, bar)); } +#endif #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.3