From dfde5d62ed9b28b0bda676c16e8cb635df244ef2 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 3 Oct 2006 12:38:45 -0700 Subject: [CPUFREQ][8/8] acpi-cpufreq: Add support for freq feedback from hardware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable ondemand governor and acpi-cpufreq to use IA32_APERF and IA32_MPERF MSR to get active frequency feedback for the last sampling interval. This will make ondemand take right frequency decisions when hardware coordination of frequency is going on. Without APERF/MPERF, ondemand can take wrong decision at times due to underlying hardware coordination or TM2. Example: * CPU 0 and CPU 1 are hardware cooridnated. * CPU 1 running at highest frequency. * CPU 0 was running at highest freq. Now ondemand reduces it to some intermediate frequency based on utilization. * Due to underlying hardware coordination with other CPU 1, CPU 0 continues to run at highest frequency (as long as other CPU is at highest). * When ondemand samples CPU 0 again next time, without actual frequency feedback from APERF/MPERF, it will think that previous frequency change was successful and can go to wrong target frequency. This is because it thinks that utilization it has got this sampling interval is when running at intermediate frequency, rather than actual highest frequency. More information about IA32_APERF IA32_MPERF MSR: Refer to IA-32 Intel® Architecture Software Developer's Manual at http://developer.intel.com Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- include/asm-i386/msr.h | 3 +++ include/asm-x86_64/msr.h | 3 +++ include/linux/cpufreq.h | 3 +++ 3 files changed, 9 insertions(+) (limited to 'include') diff --git a/include/asm-i386/msr.h b/include/asm-i386/msr.h index 62b76cd9695..0aa15fc8d91 100644 --- a/include/asm-i386/msr.h +++ b/include/asm-i386/msr.h @@ -125,6 +125,9 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val) #define MSR_IA32_PERF_STATUS 0x198 #define MSR_IA32_PERF_CTL 0x199 +#define MSR_IA32_MPERF 0xE7 +#define MSR_IA32_APERF 0xE8 + #define MSR_IA32_THERM_CONTROL 0x19a #define MSR_IA32_THERM_INTERRUPT 0x19b #define MSR_IA32_THERM_STATUS 0x19c diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h index 37e194169fa..e6158228873 100644 --- a/include/asm-x86_64/msr.h +++ b/include/asm-x86_64/msr.h @@ -307,6 +307,9 @@ static inline unsigned int cpuid_edx(unsigned int op) #define MSR_IA32_PERF_STATUS 0x198 #define MSR_IA32_PERF_CTL 0x199 +#define MSR_IA32_MPERF 0xE7 +#define MSR_IA32_APERF 0xE8 + #define MSR_IA32_THERM_CONTROL 0x19a #define MSR_IA32_THERM_INTERRUPT 0x19b #define MSR_IA32_THERM_STATUS 0x19c diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 4ea39fee99c..7f008f6bfdc 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -172,6 +172,8 @@ extern int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int relation); +extern int cpufreq_driver_getavg(struct cpufreq_policy *policy); + int cpufreq_register_governor(struct cpufreq_governor *governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor); @@ -204,6 +206,7 @@ struct cpufreq_driver { unsigned int (*get) (unsigned int cpu); /* optional */ + unsigned int (*getavg) (unsigned int cpu); int (*exit) (struct cpufreq_policy *policy); int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg); int (*resume) (struct cpufreq_policy *policy); -- cgit v1.2.3 From d0a9081b1e75ba62bb4450c5b8e8299a41d25278 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 20 Oct 2006 14:30:27 -0700 Subject: ACPI: uninline ACPI global locking functions - Fixes a build problem with CONFIG_M386=y (include file dependencies get messy). - Share the implementation between x86 and x86_64 - These are too big to inline anyway. Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/asm-i386/acpi.h | 26 ++------------------------ include/asm-x86_64/acpi.h | 26 ++------------------------ 2 files changed, 4 insertions(+), 48 deletions(-) (limited to 'include') diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h index 6016632d032..29bee1dcde7 100644 --- a/include/asm-i386/acpi.h +++ b/include/asm-i386/acpi.h @@ -56,30 +56,8 @@ #define ACPI_ENABLE_IRQS() local_irq_enable() #define ACPI_FLUSH_CPU_CACHE() wbinvd() - -static inline int -__acpi_acquire_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); - val = cmpxchg(lock, old, new); - } while (unlikely (val != old)); - return (new < 3) ? -1 : 0; -} - -static inline int -__acpi_release_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = old & ~0x3; - val = cmpxchg(lock, old, new); - } while (unlikely (val != old)); - return old & 0x1; -} +int __acpi_acquire_global_lock(unsigned int *lock); +int __acpi_release_global_lock(unsigned int *lock); #define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \ ((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr)) diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h index ed59aa4c6ff..1371e88666e 100644 --- a/include/asm-x86_64/acpi.h +++ b/include/asm-x86_64/acpi.h @@ -54,30 +54,8 @@ #define ACPI_ENABLE_IRQS() local_irq_enable() #define ACPI_FLUSH_CPU_CACHE() wbinvd() - -static inline int -__acpi_acquire_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); - val = cmpxchg(lock, old, new); - } while (unlikely (val != old)); - return (new < 3) ? -1 : 0; -} - -static inline int -__acpi_release_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = old & ~0x3; - val = cmpxchg(lock, old, new); - } while (unlikely (val != old)); - return old & 0x1; -} +int __acpi_acquire_global_lock(unsigned int *lock); +int __acpi_release_global_lock(unsigned int *lock); #define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \ ((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr)) -- cgit v1.2.3 From 7dcdcbef5d2b60d1db68fd2c07351f7afd8ad376 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 21 Oct 2006 17:09:53 +0100 Subject: [MTD] NAND: Combined oob buffer so it's contiguous with data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ditch the separate oobrbuf and oobwbuf fields from the chip buffers, and use only a single buffer immediately after the data. This accommodates NAND controllers such as the OLPC CAFÉ chip, which can't do scatter/gather DMA so needs the OOB buffer to be contiguous with the data, for both read and write. Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 70420bbae82..6fc3e07497e 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -286,9 +286,7 @@ struct nand_ecc_ctrl { * struct nand_buffers - buffer structure for read/write * @ecccalc: buffer for calculated ecc * @ecccode: buffer for ecc read from flash - * @oobwbuf: buffer for write oob data * @databuf: buffer for data - dynamically sized - * @oobrbuf: buffer to read oob data * * Do not change the order of buffers. databuf and oobrbuf must be in * consecutive order. @@ -296,9 +294,7 @@ struct nand_ecc_ctrl { struct nand_buffers { uint8_t ecccalc[NAND_MAX_OOBSIZE]; uint8_t ecccode[NAND_MAX_OOBSIZE]; - uint8_t oobwbuf[NAND_MAX_OOBSIZE]; - uint8_t databuf[NAND_MAX_PAGESIZE]; - uint8_t oobrbuf[NAND_MAX_OOBSIZE]; + uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE]; }; /** -- cgit v1.2.3 From 4e74663c5d7eefc1f953b9b0bdacab09917b4eac Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 31 Oct 2006 12:44:08 -0500 Subject: [CPUFREQ] p4-clockmod: add more CPUs Several more Intel CPUs are now capable using the p4-clockmod cpufreq driver. As it is of limited use most of the time, print a big bold warning if a better cpufreq driver might be available. Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones --- include/asm-i386/msr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-i386/msr.h b/include/asm-i386/msr.h index 0aa15fc8d91..8c31887e1cf 100644 --- a/include/asm-i386/msr.h +++ b/include/asm-i386/msr.h @@ -95,6 +95,8 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val) #define MSR_P6_PERFCTR0 0xc1 #define MSR_P6_PERFCTR1 0xc2 +#define MSR_FSB_FREQ 0xcd + #define MSR_IA32_BBL_CR_CTL 0x119 -- cgit v1.2.3 From 2c22120fbd017d78ad2b6825ba573db3ef539bca Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 16 Nov 2006 11:23:48 +0900 Subject: MTD: OneNAND: interrupt based wait support We can use the two methods to wait. 1. polling: read interrupt status register 2. interrupt: use kernel ineterrupt mechanism To use interrupt method, you first connect onenand interrupt pin to your platform and configure interrupt properly Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 6f045b586e7..df963f1f6f8 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -13,6 +13,7 @@ #define __LINUX_MTD_ONENAND_H #include +#include #include #include @@ -120,6 +121,9 @@ struct onenand_chip { int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); int (*scan_bbt)(struct mtd_info *mtd); + struct completion complete; + int irq; + spinlock_t chip_lock; wait_queue_head_t wq; onenand_state_t state; -- cgit v1.2.3 From 08f782b60a633cbd926ef5e49de303a752390719 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 16 Nov 2006 11:29:39 +0900 Subject: [MTD] OneNAND: lock support Now you can use mtd lock inferface on OneNAND The idea is from Nemakal, Vijaya, thanks Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index df963f1f6f8..62ca0f42982 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -34,7 +34,6 @@ typedef enum { FL_WRITING, FL_ERASING, FL_SYNCING, - FL_UNLOCKING, FL_LOCKING, FL_RESETING, FL_OTPING, -- cgit v1.2.3 From f4f91ac3c833abbd7181ff2122c6b48a653b4e55 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 16 Nov 2006 12:03:56 +0900 Subject: [MTD] OneNAND: Single bit error detection Idea from Jarkko Lavinen Signed-off-by: Jarkko Lavinen Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand_regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 9e409fe6ded..e31c8f5d427 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -179,6 +179,7 @@ * ECC Status Reigser FF00h (R) */ #define ONENAND_ECC_1BIT (1 << 0) +#define ONENAND_ECC_1BIT_ALL (0x5555) #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) -- cgit v1.2.3 From 191876729901d0c8dab8a331f9a1e4b73a56457b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 27 Oct 2006 09:09:33 +0100 Subject: [MTD] Allow variable block sizes in mtd_blkdevs Currently, mtd_blkdevs enforces a block size of 512, even if the drivers can seemingly request a different size. This patch fixes mtd_blkdevs so block sizes other than 512 work correctly. Signed-off-by: Richard Purdie Signed-off-by: David Woodhouse --- include/linux/mtd/blktrans.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index 72fc68c5ee9..9a6e2f953cb 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -24,7 +24,6 @@ struct mtd_blktrans_dev { struct mtd_info *mtd; struct mutex lock; int devnum; - int blksize; unsigned long size; int readonly; void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */ @@ -36,6 +35,8 @@ struct mtd_blktrans_ops { char *name; int major; int part_bits; + int blksize; + int blkshift; /* Access functions */ int (*readsect)(struct mtd_blktrans_dev *dev, -- cgit v1.2.3 From 7014568bad55c20b7ee4f439d78c9e875912d51f Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Fri, 3 Nov 2006 18:20:38 +0300 Subject: [MTD] [NAND] remove len/ooblen confusion. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As was discussed between Ricard Wanderlöf, David Woodhouse, Artem Bityutskiy and me, the current API for reading/writing OOB is confusing. The thing that introduces confusion is the need to specify ops.len together with ops.ooblen for reads/writes that concern only OOB not data area. So, ops.len is overloaded: when ops.datbuf != NULL it serves to specify the length of the data read, and when ops.datbuf == NULL, it serves to specify the full OOB read length. The patch inlined below is the slightly updated version of the previous patch serving the same purpose, but with the new Artem's comments taken into account. Artem, BTW, thanks a lot for your valuable input! Signed-off-by: Vitaly Wool Signed-off-by: David Woodhouse --- include/linux/mtd/mtd.h | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 94a443d4525..4fc391ec9d0 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -75,15 +75,12 @@ typedef enum { * struct mtd_oob_ops - oob operation operands * @mode: operation mode * - * @len: number of bytes to write/read. When a data buffer is given - * (datbuf != NULL) this is the number of data bytes. When - * no data buffer is available this is the number of oob bytes. + * @len: number of data bytes to write/read * - * @retlen: number of bytes written/read. When a data buffer is given - * (datbuf != NULL) this is the number of data bytes. When - * no data buffer is available this is the number of oob bytes. + * @retlen: number of data bytes written/read * - * @ooblen: number of oob bytes per page + * @ooblen: number of oob bytes to write/read + * @oobretlen: number of oob bytes written/read * @ooboffs: offset of oob data in the oob area (only relevant when * mode = MTD_OOB_PLACE) * @datbuf: data buffer - if NULL only oob data are read/written @@ -94,6 +91,7 @@ struct mtd_oob_ops { size_t len; size_t retlen; size_t ooblen; + size_t oobretlen; uint32_t ooboffs; uint8_t *datbuf; uint8_t *oobbuf; -- cgit v1.2.3 From c0fe10aef354912c38c43991dd38c16f1828cfe3 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 13 Nov 2006 13:47:43 +0200 Subject: [MTD] increase MAX_MTD_DEVICES Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 4fc391ec9d0..e34bbc98d4f 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -23,7 +23,7 @@ #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 -#define MAX_MTD_DEVICES 16 +#define MAX_MTD_DEVICES 32 #define MTD_ERASE_PENDING 0x01 #define MTD_ERASING 0x02 -- cgit v1.2.3 From 29072b96078ffde36f03d51e6b5d0cff1ba8c7df Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 28 Sep 2006 15:38:36 +0200 Subject: [MTD] NAND: add subpage write support Many SLC NANDs support up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 2 ++ include/linux/mtd/nand.h | 9 +++++++++ 2 files changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index e34bbc98d4f..18acb6d0033 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -200,6 +200,8 @@ struct mtd_info { /* ECC status information */ struct mtd_ecc_stats ecc_stats; + /* Subpage shift (NAND) */ + int subpage_sft; void *priv; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 6fc3e07497e..1aeedf27a1f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -166,6 +166,9 @@ typedef enum { * for all large page devices, as they do not support * autoincrement.*/ #define NAND_NO_READRDY 0x00000100 +/* Chip does not allow subpage writes */ +#define NAND_NO_SUBPAGE_WRITE 0x00000200 + /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ @@ -193,6 +196,9 @@ typedef enum { /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 +/* Cell info constants */ +#define NAND_CI_CHIPNR_MSK 0x03 +#define NAND_CI_CELLTYPE_MSK 0x0C /* * nand_state_t - chip states @@ -341,6 +347,7 @@ struct nand_buffers { * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf + * @subpagesize: [INTERN] holds the subpagesize * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup @@ -388,6 +395,8 @@ struct nand_chip { unsigned long chipsize; int pagemask; int pagebuf; + int subpagesize; + uint8_t cellinfo; int badblockpos; nand_state_t state; -- cgit v1.2.3 From 7799308f34d3c3371a319559687c78c0f2506fcf Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 11 Oct 2006 14:52:44 +0300 Subject: [MTD] add get_mtd_device_nm() function This patch adds one more function to the MTD interface to make it possible to open MTD devices by their names, not only numbers. This is very handy in many situations. Also, MTD device number depend on load order and may vary, while names are fixed. Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 18acb6d0033..89e937dfef5 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -216,6 +216,7 @@ extern int add_mtd_device(struct mtd_info *mtd); extern int del_mtd_device (struct mtd_info *mtd); extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); +extern struct mtd_info *get_mtd_device_nm(const char *name); extern void put_mtd_device(struct mtd_info *mtd); -- cgit v1.2.3 From 9fe912cea32aec18f860c95e8574410b5892481b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 11 Oct 2006 14:52:45 +0300 Subject: [MTD] add get and put methods This patch adds get_device() and put_device() methods to the MTD description structure (struct mtd_info). These methods are called by MTD whenever the MTD device is get or put. They are needed when the underlying driver is something smarter then just flash chip driver, for example UBI. Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 89e937dfef5..d644e57703a 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -207,6 +207,13 @@ struct mtd_info { struct module *owner; int usecount; + + /* If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. + * The driver may register its callbacks. These callbacks are not + * supposed to be called by MTD users */ + int (*get_device) (struct mtd_info *mtd); + void (*put_device) (struct mtd_info *mtd); }; -- cgit v1.2.3 From 04da6af960194ecdee4c29cd3f86e766903418ca Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 5 Dec 2006 17:52:37 +1100 Subject: [POWERPC] Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.c Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.c, this allows rtas_stop_self() to be static so remove the prototype. Wire up pSeries_mach_cpu_die() in the initcall, rather than statically in setup.c, the initcall will still run prior to the cpu hotplug code being callable, so there should be no change in behaviour. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- include/asm-powerpc/rtas.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index 5a0c136c041..031ef57fb19 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -221,8 +221,6 @@ extern int rtas_get_error_log_max(void); extern spinlock_t rtas_data_buf_lock; extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; -extern void rtas_stop_self(void); - /* RMO buffer reserved for user-space RTAS use */ extern unsigned long rtas_rmo_buf; -- cgit v1.2.3 From be9575af7e8ec9040330f57b974e52d6921c08bb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 5 Dec 2006 23:30:16 +0100 Subject: [POWERPC] cell: Fix spu_info.h header export It uses #ifdef __KERNEL__, so needs to be processed with unifdef. Signed-off-by: Arnd Bergann Acked-by: Geoff Levand Signed-off-by: Paul Mackerras --- include/asm-powerpc/Kbuild | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 1e637381c11..703970fb0ec 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -17,7 +17,6 @@ header-y += ipc.h header-y += poll.h header-y += shmparam.h header-y += sockios.h -header-y += spu_info.h header-y += ucontext.h header-y += ioctl.h header-y += linkage.h @@ -37,6 +36,7 @@ unifdef-y += posix_types.h unifdef-y += ptrace.h unifdef-y += seccomp.h unifdef-y += signal.h +unifdef-y += spu_info.h unifdef-y += termios.h unifdef-y += types.h unifdef-y += unistd.h -- cgit v1.2.3 From 1d4454e7ce30239e67b154ae08f6d906b9737334 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 6 Dec 2006 15:15:38 -0800 Subject: [POWERPC] Define pci_unmap_addr() et al. when CONFIG_NOT_COHERENT_CACHE=y The current PowerPC code makes pci_unmap_addr(), pci_unmap_addr_set(), and friends trivial for all 32-bit kernels. This is reasonable, since for those kernels it is true that pci_unmap_single() does not need the DMA address from the original DMA mapping -- in fact, it is a NOP. However, I recently tried the tg3 driver on a PowerPC 440SPe machine, which runs a 32-bit kernel and has non-cache-coherent PCI DMA. I found that the tg3 driver crashed in pci_dma_sync_single_for_cpu(), since for non-coherent systems, that function must invalidate the cache for the DMA address range requested, and therefore it does use the address passed in. tg3 uses a DMA address it stashes away with pci_unmap_addr_set() and retrieves with pci_unmap_addr(). Of course, since pci_unmap_addr() is defined to (0) right now, this doesn't work. It seems to me that the tg3 driver is using pci_unmap_addr() in a legitimate way -- I wouldn't want to have to teach all drivers that they should use pci_unmap_addr() if they only need the address for unmapping functions, but if they want the pci_dma_sync functions, then they have to store the DMA address without the helper macros. The right fix therefore seems to be in the definition of the macros in -- we should use the trivial versions only for 32-bit kernels for coherent systems, and the real versions for both 64-bit kernels and non-coherent systems. Signed-off-by: Roland Dreier Signed-off-by: Paul Mackerras --- include/asm-powerpc/pci.h | 33 ++++++++++++++++++++++----------- include/asm-ppc/pci.h | 23 +++++++++++++++++++++++ 2 files changed, 45 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h index 16f13319c76..ac656ee6bb1 100644 --- a/include/asm-powerpc/pci.h +++ b/include/asm-powerpc/pci.h @@ -143,8 +143,13 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ #define HAVE_PCI_MMAP 1 -#ifdef CONFIG_PPC64 -/* pci_unmap_{single,page} is not a nop, thus... */ +#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE) +/* + * For 64-bit kernels, pci_unmap_{single,page} is not a nop. + * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and + * so on are not nops. + * and thus... + */ #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ @@ -158,6 +163,20 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, #define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ (((PTR)->LEN_NAME) = (VAL)) +#else /* 32-bit && coherent */ + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */ + +#ifdef CONFIG_PPC64 + /* The PCI address space does not equal the physical memory address * space (we have an IOMMU). The IDE and SCSI device layers use * this boolean for bounce buffer decisions. @@ -172,16 +191,8 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, */ #define PCI_DMA_BUS_IS_PHYS (1) -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - #endif /* CONFIG_PPC64 */ - + extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res); diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h index 11ffaaa5da1..9d162028dab 100644 --- a/include/asm-ppc/pci.h +++ b/include/asm-ppc/pci.h @@ -61,6 +61,27 @@ extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr); */ #define PCI_DMA_BUS_IS_PHYS (1) +#ifdef CONFIG_NOT_COHERENT_CACHE +/* + * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu() + * and so on are not, so... + */ + +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +#else /* coherent */ + /* pci_unmap_{page,single} is a nop so... */ #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) @@ -69,6 +90,8 @@ extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr); #define pci_unmap_len(PTR, LEN_NAME) (0) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#endif /* CONFIG_NOT_COHERENT_CACHE */ + #ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, -- cgit v1.2.3 From 3a1d1ac279fac16ab1b41b2868478f3085f9223c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 5 Dec 2006 22:15:05 -0700 Subject: [POWERPC] Delete unused irq functions on powerpc The ack_irq macro is unused and conflicts with James' work to template the generic irq code. mask_irq and unmask_irq are also unused, so delete those macros too. Signed-off-by: Matthew Wilcox Signed-off-by: Paul Mackerras --- include/asm-powerpc/hw_irq.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index d604863d72f..9e4dd98eb22 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -107,25 +107,6 @@ static inline void local_irq_save_ptr(unsigned long *flags) #endif /* CONFIG_PPC64 */ -#define mask_irq(irq) \ - ({ \ - irq_desc_t *desc = get_irq_desc(irq); \ - if (desc->chip && desc->chip->disable) \ - desc->chip->disable(irq); \ - }) -#define unmask_irq(irq) \ - ({ \ - irq_desc_t *desc = get_irq_desc(irq); \ - if (desc->chip && desc->chip->enable) \ - desc->chip->enable(irq); \ - }) -#define ack_irq(irq) \ - ({ \ - irq_desc_t *desc = get_irq_desc(irq); \ - if (desc->chip && desc->chip->ack) \ - desc->chip->ack(irq); \ - }) - /* * interrupt-retrigger: should we handle this via lost interrupts and IPIs * or should we not care like we do now ? --BenH. -- cgit v1.2.3 From f2d6d2d8bb4e9bb4aef225c149e42cac3ac3d4d0 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 6 Dec 2006 18:50:45 -0600 Subject: [POWERPC] Add rtas_service_present() helper To test for the existence of an RTAS function, we typically do: foo_token = rtas_token("foo"); if (foo_token == RTAS_UNKNOWN_SERVICE) return; Add a rtas_service_present method, which provides a more conventional boolean interface for testing the existence of an RTAS method. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- include/asm-powerpc/rtas.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index 031ef57fb19..8eaa7b28d9d 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -159,6 +159,7 @@ extern struct rtas_t rtas; extern void enter_rtas(unsigned long); extern int rtas_token(const char *service); +extern int rtas_service_present(const char *service); extern int rtas_call(int token, int, int, int *, ...); extern void rtas_restart(char *cmd); extern void rtas_power_off(void); -- cgit v1.2.3 From 396a1a5832ae28ce2c4150f98827873cbef554f5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 8 Dec 2006 17:14:33 +1100 Subject: [POWERPC] Fix mmap of PCI resource with hack for X The powerpc version of pci_resource_to_user() and associated hooks used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some time on machines that don't have a 1:1 mapping of devices (basically on non-PowerMacs) and have PCI devices above 32 bits. This attempts to fix it as well as possible. The rule is supposed to be that pci_resource_to_user() always converts the resources back into a BAR values since that's what the /proc interface was supposed to deal with. However, for X to work on platforms where PCI MMIO is not mapped 1:1, it became a habit of platforms like powerpc to pass "fixed up" values there since X expects to be able to use values from /proc/bus/pci/devices as offsets to mmap of /dev/mem... So we keep that contraption here, causing also /sys/*/resource to expose fully absolute MMIO addresses instead of BAR values, which is ugly, but should still work as long as those are only used to calculate alignment within a page. X is still broken when built 32 bits on machines where PCI MMIO can be above 32-bit space unfortunately. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/pci-bridge.h | 4 ++-- include/asm-ppc/pci-bridge.h | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index 7bb7f900980..cb02c9d1ef9 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -31,12 +31,12 @@ struct pci_controller { int last_busno; void __iomem *io_base_virt; - unsigned long io_base_phys; + resource_size_t io_base_phys; /* Some machines have a non 1:1 mapping of * the PCI memory space in the CPU bus space */ - unsigned long pci_mem_offset; + resource_size_t pci_mem_offset; unsigned long pci_io_size; struct pci_ops *ops; diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h index 6c955d0c1ef..4d35b844bc5 100644 --- a/include/asm-ppc/pci-bridge.h +++ b/include/asm-ppc/pci-bridge.h @@ -20,8 +20,8 @@ extern unsigned long pci_bus_mem_base_phys(unsigned int bus); extern struct pci_controller* pcibios_alloc_controller(void); /* Helper function for setting up resources */ -extern void pci_init_resource(struct resource *res, unsigned long start, - unsigned long end, int flags, char *name); +extern void pci_init_resource(struct resource *res, resource_size_t start, + resource_size_t end, int flags, char *name); /* Get the PCI host controller for a bus */ extern struct pci_controller* pci_bus_to_hose(int bus); @@ -50,12 +50,12 @@ struct pci_controller { int bus_offset; void __iomem *io_base_virt; - unsigned long io_base_phys; + resource_size_t io_base_phys; /* Some machines (PReP) have a non 1:1 mapping of * the PCI memory space in the CPU bus space */ - unsigned long pci_mem_offset; + resource_size_t pci_mem_offset; struct pci_ops *ops; volatile unsigned int __iomem *cfg_addr; -- cgit v1.2.3 From aa42c69c67f82e88f0726258efe7306708e1cf14 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 8 Dec 2006 02:43:30 -0600 Subject: [POWERPC] Add support for FP emulation for the e300c2 core The e300c2 has no FPU. Its MSR[FP] is grounded to zero. If an attempt is made to execute a floating point instruction (including floating-point load, store, or move instructions), the e300c2 takes a floating-point unavailable interrupt. This patch adds support for FP emulation on the e300c2 by declaring a new CPU_FTR_FP_TAKES_FPUNAVAIL, where FP unavail interrupts are intercepted and redirected to the ProgramCheck exception path for correct emulation handling. (If we run out of CPU_FTR bits we could look to reclaim this bit by adding support to test the cpu_user_features for PPC_FEATURE_HAS_FPU instead) It adds a nop to the exception path for 32-bit processors with a FPU. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- include/asm-powerpc/cputable.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 6fe5c9d4ca3..aca72f90849 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -126,6 +126,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) #define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) #define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) +#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) /* * Add the 64-bit processor unique features in the top half of the word; @@ -295,6 +296,9 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_E300 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ CPU_FTR_COMMON) +#define CPU_FTRS_E300C2 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE) #define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE) #define CPU_FTRS_8XX (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB) @@ -364,7 +368,8 @@ enum { CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 | CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 | CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX | - CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_CLASSIC32 | + CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 | + CPU_FTRS_CLASSIC32 | #else CPU_FTRS_GENERIC_32 | #endif @@ -403,7 +408,8 @@ enum { CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 & CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 & CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX & - CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_CLASSIC32 & + CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 & + CPU_FTRS_CLASSIC32 & #else CPU_FTRS_GENERIC_32 & #endif -- cgit v1.2.3 From c3e2a79c0bd3e12b67ce5f11cab10951ae8b7f37 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 4 Dec 2006 13:46:52 +0100 Subject: [AVR32] Portmux API update Rename portmux_set_func to at32_select_periph, add at32_select_gpio and add flags parameter to specify the initial state of the pins. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/arch-at32ap/at32ap7000.h | 33 ++++++++++++++++++++++++++++++ include/asm-avr32/arch-at32ap/portmux.h | 20 +++++++++++++----- 2 files changed, 48 insertions(+), 5 deletions(-) create mode 100644 include/asm-avr32/arch-at32ap/at32ap7000.h (limited to 'include') diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h new file mode 100644 index 00000000000..ba85e04553d --- /dev/null +++ b/include/asm-avr32/arch-at32ap/at32ap7000.h @@ -0,0 +1,33 @@ +/* + * Pin definitions for AT32AP7000. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_AT32AP7000_H__ +#define __ASM_ARCH_AT32AP7000_H__ + +#define GPIO_PERIPH_A 0 +#define GPIO_PERIPH_B 1 + +#define NR_GPIO_CONTROLLERS 4 + +/* + * Pin numbers identifying specific GPIO pins on the chip. They can + * also be converted to IRQ numbers by passing them through + * gpio_to_irq(). + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) + +#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) +#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) +#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) +#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) + +#endif /* __ASM_ARCH_AT32AP7000_H__ */ diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h index 4d50421262a..83c69057132 100644 --- a/include/asm-avr32/arch-at32ap/portmux.h +++ b/include/asm-avr32/arch-at32ap/portmux.h @@ -7,10 +7,20 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_AVR32_AT32_PORTMUX_H__ -#define __ASM_AVR32_AT32_PORTMUX_H__ +#ifndef __ASM_ARCH_PORTMUX_H__ +#define __ASM_ARCH_PORTMUX_H__ -void portmux_set_func(unsigned int portmux_id, unsigned int pin_id, - unsigned int function_id); +/* + * Set up pin multiplexing, called from board init only. + * + * The following flags determine the initial state of the pin. + */ +#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */ +#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */ +#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */ + +void at32_select_periph(unsigned int pin, unsigned int periph, + unsigned long flags); +void at32_select_gpio(unsigned int pin, unsigned long flags); -#endif /* __ASM_AVR32_AT32_PORTMUX_H__ */ +#endif /* __ASM_ARCH_PORTMUX_H__ */ -- cgit v1.2.3 From c164b90135d05ac52f70e6652910a4f585f7b999 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 4 Dec 2006 14:08:39 +0100 Subject: [AVR32] Remove mii_phy_addr and eth_addr from eth_platform_data The macb driver will probe for the PHY chip and read the mac address from the MACB registers, so we don't need them in eth_platform_data anymore. Since u-boot doesn't currently initialize the MACB registers with the mac addresses, the tag parsing code is kept but instead of sticking the information into eth_platform_data, it uses it to initialize the MACB registers (in case the boot loader didn't do it.) This code should be unnecessary at some point in the future. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/arch-at32ap/board.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index a39b3e999f1..b120ee030c8 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -21,10 +21,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line); struct platform_device *at32_add_device_usart(unsigned int id); struct eth_platform_data { - u8 valid; - u8 mii_phy_addr; u8 is_rmii; - u8 hw_addr[6]; }; struct platform_device * at32_add_device_eth(unsigned int id, struct eth_platform_data *data); -- cgit v1.2.3 From 50954ab327a9f860caef1a7c8353346b945cb316 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 8 Dec 2006 12:53:26 +0100 Subject: [AVR32] Pass dev parameter to dma_cache_sync() Fix build breakage resulting from the extra dev parameter added to dma_cache_sync(). Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/dma-mapping.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h index 0580b5d62bb..5c01e27f0b4 100644 --- a/include/asm-avr32/dma-mapping.h +++ b/include/asm-avr32/dma-mapping.h @@ -109,7 +109,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction direction) { - dma_cache_sync(cpu_addr, size, direction); + dma_cache_sync(dev, cpu_addr, size, direction); return virt_to_bus(cpu_addr); } @@ -211,7 +211,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, sg[i].dma_address = page_to_bus(sg[i].page) + sg[i].offset; virt = page_address(sg[i].page) + sg[i].offset; - dma_cache_sync(virt, sg[i].length, direction); + dma_cache_sync(dev, virt, sg[i].length, direction); } return nents; @@ -256,14 +256,14 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - dma_cache_sync(bus_to_virt(dma_handle), size, direction); + dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction); } static inline void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - dma_cache_sync(bus_to_virt(dma_handle), size, direction); + dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction); } /** @@ -286,7 +286,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int i; for (i = 0; i < nents; i++) { - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, direction); } } @@ -298,7 +298,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int i; for (i = 0; i < nents; i++) { - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, direction); } } -- cgit v1.2.3 From 9575bf265711cabe7147a68003a56a9f19f034da Mon Sep 17 00:00:00 2001 From: Horst Hummel Date: Fri, 8 Dec 2006 15:54:15 +0100 Subject: [S390] New DASD feature for ERP related logging It is now possible to enable/disable ERP related logging without re-compile and re-ipl. A additional sysfs-attribute 'erplog' allows to switch the logging non-interruptive. Signed-off-by: Horst Hummel Signed-off-by: Martin Schwidefsky --- include/asm-s390/dasd.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-s390/dasd.h b/include/asm-s390/dasd.h index c042f957808..604f68fa6f5 100644 --- a/include/asm-s390/dasd.h +++ b/include/asm-s390/dasd.h @@ -69,11 +69,13 @@ typedef struct dasd_information2_t { * 0x01: readonly (ro) * 0x02: use diag discipline (diag) * 0x04: set the device initially online (internal use only) + * 0x08: enable ERP related logging */ #define DASD_FEATURE_DEFAULT 0x00 #define DASD_FEATURE_READONLY 0x01 #define DASD_FEATURE_USEDIAG 0x02 #define DASD_FEATURE_INITIAL_ONLINE 0x04 +#define DASD_FEATURE_ERPLOG 0x08 #define DASD_PARTN_BITS 2 -- cgit v1.2.3 From f4eb07c17df2e6cf9bd58bfcd9cc9e05e9489d07 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 8 Dec 2006 15:56:07 +0100 Subject: [S390] Virtual memmap for s390. Virtual memmap support for s390. Inspired by the ia64 implementation. Unlike ia64 we need a mechanism which allows us to dynamically attach shared memory regions. These memory regions are accessed via the dcss device driver. dcss implements the 'direct_access' operation, which requires struct pages for every single shared page. Therefore this implementation provides an interface to attach/detach shared memory: int add_shared_memory(unsigned long start, unsigned long size); int remove_shared_memory(unsigned long start, unsigned long size); The purpose of the add_shared_memory function is to add the given memory range to the 1:1 mapping and to make sure that the corresponding range in the vmemmap is backed with physical pages. It also initialises the new struct pages. remove_shared_memory in turn only invalidates the page table entries in the 1:1 mapping. The page tables and the memory used for struct pages in the vmemmap are currently not freed. They will be reused when the next segment will be attached. Given that the maximum size of a shared memory region is 2GB and in addition all regions must reside below 2GB this is not too much of a restriction, but there is room for improvement. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/page.h | 22 ++++++++++++++++++++-- include/asm-s390/pgalloc.h | 3 +++ include/asm-s390/pgtable.h | 16 ++++++++++++---- 3 files changed, 35 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h index 363ea761d5e..05ea6f17278 100644 --- a/include/asm-s390/page.h +++ b/include/asm-s390/page.h @@ -127,6 +127,26 @@ page_get_storage_key(unsigned long addr) return skey; } +extern unsigned long max_pfn; + +static inline int pfn_valid(unsigned long pfn) +{ + unsigned long dummy; + int ccode; + + if (pfn >= max_pfn) + return 0; + + asm volatile( + " lra %0,0(%2)\n" + " ipm %1\n" + " srl %1,28\n" + : "=d" (dummy), "=d" (ccode) + : "a" (pfn << PAGE_SHIFT) + : "cc"); + return !ccode; +} + #endif /* !__ASSEMBLY__ */ /* to align the pointer to the (next) page boundary */ @@ -138,8 +158,6 @@ page_get_storage_key(unsigned long addr) #define __va(x) (void *)(unsigned long)(x) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -#define pfn_valid(pfn) ((pfn) < max_mapnr) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ diff --git a/include/asm-s390/pgalloc.h b/include/asm-s390/pgalloc.h index 28619de5eca..0707a7e2fc1 100644 --- a/include/asm-s390/pgalloc.h +++ b/include/asm-s390/pgalloc.h @@ -25,8 +25,11 @@ extern void diag10(unsigned long addr); * Page allocation orders. */ #ifndef __s390x__ +# define PTE_ALLOC_ORDER 0 +# define PMD_ALLOC_ORDER 0 # define PGD_ALLOC_ORDER 1 #else /* __s390x__ */ +# define PTE_ALLOC_ORDER 0 # define PMD_ALLOC_ORDER 2 # define PGD_ALLOC_ORDER 2 #endif /* __s390x__ */ diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index 2d968a69ed1..ae61aca5d48 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -107,23 +107,25 @@ extern char empty_zero_page[PAGE_SIZE]; * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) */ +extern unsigned long vmalloc_end; #define VMALLOC_OFFSET (8*1024*1024) #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) \ & ~(VMALLOC_OFFSET-1)) +#define VMALLOC_END vmalloc_end /* * We need some free virtual space to be able to do vmalloc. * VMALLOC_MIN_SIZE defines the minimum size of the vmalloc * area. On a machine with 2GB memory we make sure that we * have at least 128MB free space for vmalloc. On a machine - * with 4TB we make sure we have at least 1GB. + * with 4TB we make sure we have at least 128GB. */ #ifndef __s390x__ #define VMALLOC_MIN_SIZE 0x8000000UL -#define VMALLOC_END 0x80000000UL +#define VMALLOC_END_INIT 0x80000000UL #else /* __s390x__ */ -#define VMALLOC_MIN_SIZE 0x40000000UL -#define VMALLOC_END 0x40000000000UL +#define VMALLOC_MIN_SIZE 0x2000000000UL +#define VMALLOC_END_INIT 0x40000000000UL #endif /* __s390x__ */ /* @@ -815,11 +817,17 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) #define kern_addr_valid(addr) (1) +extern int add_shared_memory(unsigned long start, unsigned long size); +extern int remove_shared_memory(unsigned long start, unsigned long size); + /* * No page table caches to initialise */ #define pgtable_cache_init() do { } while (0) +#define __HAVE_ARCH_MEMMAP_INIT +extern void memmap_init(unsigned long, int, unsigned long, unsigned long); + #define __HAVE_ARCH_PTEP_ESTABLISH #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -- cgit v1.2.3 From efe90d273b6f365d37c0f82fbbd68a40982c3265 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 8 Dec 2006 15:22:20 +0000 Subject: [ARM] Handle HWCAP_VFP in VFP support code Don't set HWCAP_VFP in the processor support file; not only does it depend on the processor features, but it also depends on the support code being present. Therefore, only set it if the support code detects that we have a VFP coprocessor attached. Also, move the VFP handling of the coprocessor access register into the VFP support code. Signed-off-by: Russell King --- include/asm-arm/system.h | 43 ++++++++++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index f05fbe31576..f60faccf01f 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -139,19 +139,36 @@ static inline int cpu_is_xsc3(void) #define cpu_is_xscale() 1 #endif -#define set_cr(x) \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c1, c0, 0 @ set CR" \ - : : "r" (x) : "cc") - -#define get_cr() \ - ({ \ - unsigned int __val; \ - __asm__ __volatile__( \ - "mrc p15, 0, %0, c1, c0, 0 @ get CR" \ - : "=r" (__val) : : "cc"); \ - __val; \ - }) +static inline unsigned int get_cr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_cr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" + : : "r" (val) : "cc"); +} + +#define CPACC_FULL(n) (3 << (n * 2)) +#define CPACC_SVC(n) (1 << (n * 2)) +#define CPACC_DISABLE(n) (0 << (n * 2)) + +static inline unsigned int get_copro_access(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" + : "=r" (val) : : "cc"); + return val; +} + +static inline void set_copro_access(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" + : : "r" (val) : "cc"); +} extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ -- cgit v1.2.3 From 9fddda232ca2de4d40ba9c3890e27bdb4f4f8bbd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 8 Dec 2006 00:08:33 +0100 Subject: [ARM] 4004/1: S3C24XX: UDC remove implict addition of VA to regs Remove the implicit addition of a virtual address to the UDC registers. This should have been done by ioremap() in the driver, not by a static map. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-udc.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h index 487861d5b49..3c8354619b6 100644 --- a/include/asm-arm/arch-s3c2410/regs-udc.h +++ b/include/asm-arm/arch-s3c2410/regs-udc.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_REGS_UDC_H #define __ASM_ARCH_REGS_UDC_H - -#define S3C2410_USBDREG(x) ((x) + S3C24XX_VA_USBDEV) +#define S3C2410_USBDREG(x) (x) #define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) #define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) @@ -136,8 +135,8 @@ #define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W #define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W -#define S3C2410_UDC_SETIX(x) \ - __raw_writel(S3C2410_UDC_INDEX_ ## x, S3C2410_UDC_INDEX_REG); +#define S3C2410_UDC_SETIX(base,x) \ + writel(S3C2410_UDC_INDEX_ ## x, base+S3C2410_UDC_INDEX_REG); #define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) -- cgit v1.2.3 From 8b03a632ef673bf1069ac9c96c97ff2830289312 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Fri, 8 Dec 2006 02:35:54 -0800 Subject: [PATCH] m32r: make userspace headers platform-independent The m32r kernel 2.6.18-rc1 or after cause build errors of "unknown isa configuration" for userspace application programs, such as glibc, gdb, etc. This is because the recent kernel do not include linux/config.h not to expose kernel headers for userspace. To fix the above compile errors, this patch fixes two headers ptrace.h and sigcontext.h for m32r and makes them platform-independent. Signed-off-by: Hirokazu Takata Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-m32r/ptrace.h | 28 ++++------------------------ include/asm-m32r/sigcontext.h | 13 ++----------- 2 files changed, 6 insertions(+), 35 deletions(-) (limited to 'include') diff --git a/include/asm-m32r/ptrace.h b/include/asm-m32r/ptrace.h index 2d2a6c97331..632b4ce4269 100644 --- a/include/asm-m32r/ptrace.h +++ b/include/asm-m32r/ptrace.h @@ -33,21 +33,10 @@ #define PT_R15 PT_SP /* processor status and miscellaneous context registers. */ -#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) #define PT_ACC0H 15 #define PT_ACC0L 16 -#define PT_ACC1H 17 -#define PT_ACC1L 18 -#define PT_ACCH PT_ACC0H -#define PT_ACCL PT_ACC0L -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) -#define PT_ACCH 15 -#define PT_ACCL 16 -#define PT_DUMMY_ACC1H 17 -#define PT_DUMMY_ACC1L 18 -#else -#error unknown isa conifiguration -#endif +#define PT_ACC1H 17 /* ISA_DSP_LEVEL2 only */ +#define PT_ACC1L 18 /* ISA_DSP_LEVEL2 only */ #define PT_PSW 19 #define PT_BPC 20 #define PT_BBPSW 21 @@ -103,19 +92,10 @@ struct pt_regs { long syscall_nr; /* Saved main processor status and miscellaneous context registers. */ -#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) unsigned long acc0h; unsigned long acc0l; - unsigned long acc1h; - unsigned long acc1l; -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) - unsigned long acch; - unsigned long accl; - unsigned long dummy_acc1h; - unsigned long dummy_acc1l; -#else -#error unknown isa configuration -#endif + unsigned long acc1h; /* ISA_DSP_LEVEL2 only */ + unsigned long acc1l; /* ISA_DSP_LEVEL2 only */ unsigned long psw; unsigned long bpc; /* saved PC for TRAP syscalls */ unsigned long bbpsw; diff --git a/include/asm-m32r/sigcontext.h b/include/asm-m32r/sigcontext.h index 73025c0c41a..62537dc4dec 100644 --- a/include/asm-m32r/sigcontext.h +++ b/include/asm-m32r/sigcontext.h @@ -23,19 +23,10 @@ struct sigcontext { unsigned long sc_r12; /* Saved main processor status and miscellaneous context registers. */ -#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) unsigned long sc_acc0h; unsigned long sc_acc0l; - unsigned long sc_acc1h; - unsigned long sc_acc1l; -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) - unsigned long sc_acch; - unsigned long sc_accl; - unsigned long sc_dummy_acc1h; - unsigned long sc_dummy_acc1l; -#else -#error unknown isa configuration -#endif + unsigned long sc_acc1h; /* ISA_DSP_LEVEL2 only */ + unsigned long sc_acc1l; /* ISA_DSP_LEVEL2 only */ unsigned long sc_psw; unsigned long sc_bpc; /* saved PC for TRAP syscalls */ unsigned long sc_bbpsw; -- cgit v1.2.3 From f894cb5c938de467e208e5934c90cb9deee7dc46 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Fri, 8 Dec 2006 02:35:55 -0800 Subject: [PATCH] m32r: support a synthesizable M32700 core This patch is for supporting a synthesizable M32700 core for the Mappi-II FPGA board. On the core, location of MFT (Multi-Function Timer) registers is slightly different from the M32700 chip. Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-m32r/m32102.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-m32r/m32102.h b/include/asm-m32r/m32102.h index a1f0d1fe9eb..52807f8db16 100644 --- a/include/asm-m32r/m32102.h +++ b/include/asm-m32r/m32102.h @@ -104,7 +104,8 @@ #define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */ #define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */ -#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32104) +#if (defined(CONFIG_CHIP_M32700) && !defined(CONFIG_PLAT_MAPPI2)) \ + || defined(CONFIG_CHIP_M32104) #define M32R_MFTCR_MFT0MSK (1UL<<31) /* b0 */ #define M32R_MFTCR_MFT1MSK (1UL<<30) /* b1 */ #define M32R_MFTCR_MFT2MSK (1UL<<29) /* b2 */ @@ -117,7 +118,7 @@ #define M32R_MFTCR_MFT3EN (1UL<<20) /* b11 */ #define M32R_MFTCR_MFT4EN (1UL<<19) /* b12 */ #define M32R_MFTCR_MFT5EN (1UL<<18) /* b13 */ -#else /* not CONFIG_CHIP_M32700 && not CONFIG_CHIP_M32104 */ +#else #define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */ #define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */ #define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */ @@ -130,7 +131,7 @@ #define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */ #define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */ #define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */ -#endif /* not CONFIG_CHIP_M32700 && not CONFIG_CHIP_M32104 */ +#endif #define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */ #define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */ -- cgit v1.2.3 From d93f7de8c5dfefb030a5e65d0857176879bf78e9 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Fri, 8 Dec 2006 02:35:57 -0800 Subject: [PATCH] m32r: bootloader support for OPSPUT platform This patch supports "m32r-g00ff" bootloader for an OPSPUT platform. Applying this patch, it is possible to do ATA-boot from an IDE drive or HTTP-boot from network by m32r-g00ff. * arch/m32r/boot/compressed/m32r_sio.c: Fix hangup on OPSPUT at boot. * arch/m32r/kernel/io_opsput.c: IDE support for OPSPUT. * arch/m32r/kernel/setup_opsput.c: ditto. * include/asm-m32r/ide.h: ditto. Signed-off-by: Kazuhiro Inaoka Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-m32r/ide.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h index 219a0f74eff..c82ebe8f250 100644 --- a/include/asm-m32r/ide.h +++ b/include/asm-m32r/ide.h @@ -32,7 +32,8 @@ static __inline__ int ide_default_irq(unsigned long base) { switch (base) { -#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) +#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \ + || defined(CONFIG_PLAT_OPSPUT) case 0x1f0: return PLD_IRQ_CFIREQ; default: return 0; -- cgit v1.2.3 From 24ec839c431eb79bb8f6abc00c4e1eb3b8c4d517 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 8 Dec 2006 02:36:04 -0800 Subject: [PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra Acked-by: Alan Cox Cc: Oleg Nesterov Cc: Prarit Bhargava Cc: Chris Wright Cc: Roland McGrath Cc: Stephen Smalley Cc: James Morris Cc: "David S. Miller" Cc: Jeff Dike Cc: Martin Schwidefsky Cc: Jan Kara Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/tty.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/tty.h b/include/linux/tty.h index f717f089823..1d29999a343 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -309,6 +309,12 @@ extern void tty_ldisc_flush(struct tty_struct *tty); extern int tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); +extern dev_t tty_devnum(struct tty_struct *tty); +extern void proc_clear_tty(struct task_struct *p); +extern void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); +extern void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); +extern struct tty_struct *get_current_tty(void); + extern struct mutex tty_mutex; /* n_tty.c */ @@ -335,10 +341,5 @@ extern void console_print(const char *); extern int vt_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); -static inline dev_t tty_devnum(struct tty_struct *tty) -{ - return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index; -} - #endif /* __KERNEL__ */ #endif -- cgit v1.2.3 From ae424ae4b5bcd820ad6ee6f0b986c4e14ed4d6cf Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 8 Dec 2006 02:36:08 -0800 Subject: [PATCH] make set_special_pids() static Make set_special_pids() static, the only caller is daemonize(). Signed-off-by: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index dede82c6344..5e8a0ba6174 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1240,7 +1240,6 @@ extern struct mm_struct init_mm; #define find_task_by_pid(nr) find_task_by_pid_type(PIDTYPE_PID, nr) extern struct task_struct *find_task_by_pid_type(int type, int pid); -extern void set_special_pids(pid_t session, pid_t pgrp); extern void __set_special_pids(pid_t session, pid_t pgrp); /* per-UID process charging. */ -- cgit v1.2.3 From 0a0fc9601dd1024ec7171993bf075a789246e1ed Mon Sep 17 00:00:00 2001 From: Thomas Maier Date: Fri, 8 Dec 2006 02:36:11 -0800 Subject: [PATCH] pktcdvd: bio write congestion using congestion_wait() This adds a bio write queue congestion control to the pktcdvd driver with fixed on/off marks. It prevents that the driver consumes a unlimited amount of write requests. [akpm@osdl.org: sync with congestion_wait() renaming] Signed-off-by: Thomas Maier Cc: Peter Osterlund Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pktcdvd.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include') diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 8a94c717c26..9b1a185fb1e 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -112,6 +112,12 @@ struct pkt_ctrl_command { #include #include + +/* default bio write queue congestion marks */ +#define PKT_WRITE_CONGESTION_ON 10000 +#define PKT_WRITE_CONGESTION_OFF 9000 + + struct packet_settings { __u32 size; /* packet size in (512 byte) sectors */ @@ -271,6 +277,9 @@ struct pktcdvd_device struct packet_iosched iosched; struct gendisk *disk; + + int write_congestion_off; + int write_congestion_on; }; #endif /* __KERNEL__ */ -- cgit v1.2.3 From 32694850a91bd4fedcdd4a46292f870588be81d1 Mon Sep 17 00:00:00 2001 From: Thomas Maier Date: Fri, 8 Dec 2006 02:36:12 -0800 Subject: [PATCH] pktcdvd: add sysfs and debugfs interface Add a sysfs and debugfs interface to the pktcdvd driver. Look into the Documentation/ABI/testing/* files in the patch for more info. Signed-off-by: Thomas Maier Signed-off-by: Peter Osterlund Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pktcdvd.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 9b1a185fb1e..5ea4f05683f 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -111,7 +111,8 @@ struct pkt_ctrl_command { #include #include #include - +#include +#include /* default bio write queue congestion marks */ #define PKT_WRITE_CONGESTION_ON 10000 @@ -247,6 +248,14 @@ struct packet_stacked_data }; #define PSD_POOL_SIZE 64 +struct pktcdvd_kobj +{ + struct kobject kobj; + struct pktcdvd_device *pd; +}; +#define to_pktcdvdkobj(_k) \ + ((struct pktcdvd_kobj*)container_of(_k,struct pktcdvd_kobj,kobj)) + struct pktcdvd_device { struct block_device *bdev; /* dev attached */ @@ -280,6 +289,13 @@ struct pktcdvd_device int write_congestion_off; int write_congestion_on; + + struct class_device *clsdev; /* sysfs pktcdvd[0-7] class dev */ + struct pktcdvd_kobj *kobj_stat; /* sysfs pktcdvd[0-7]/stat/ */ + struct pktcdvd_kobj *kobj_wqueue; /* sysfs pktcdvd[0-7]/write_queue/ */ + + struct dentry *dfs_d_root; /* debugfs: devname directory */ + struct dentry *dfs_f_info; /* debugfs: info file */ }; #endif /* __KERNEL__ */ -- cgit v1.2.3 From 2e7b651df113c8a463853e4169951c52c39f9d19 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 8 Dec 2006 02:36:13 -0800 Subject: [PATCH] remove the old bd_mutex lockdep annotation Remove the old complex and crufty bd_mutex annotation. Signed-off-by: Peter Zijlstra Cc: Neil Brown Cc: Ingo Molnar Cc: Arjan van de Ven Cc: Jason Baron Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 70b99fbb560..45f2cabb8c7 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -481,21 +481,6 @@ struct block_device { unsigned long bd_private; }; -/* - * bdev->bd_mutex nesting subclasses for the lock validator: - * - * 0: normal - * 1: 'whole' - * 2: 'partition' - */ -enum bdev_bd_mutex_lock_class -{ - BD_MUTEX_NORMAL, - BD_MUTEX_WHOLE, - BD_MUTEX_PARTITION -}; - - /* * Radix-tree tags, for tagging dirty and writeback pages within the pagecache * radix trees @@ -1499,7 +1484,6 @@ extern void bd_set_size(struct block_device *, loff_t size); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); extern struct block_device *open_by_devnum(dev_t, unsigned); -extern struct block_device *open_partition_by_devnum(dev_t, unsigned); extern const struct address_space_operations def_blk_aops; #else static inline void bd_forget(struct inode *inode) {} @@ -1517,7 +1501,6 @@ extern int blkdev_driver_ioctl(struct inode *inode, struct file *file, extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long); extern int blkdev_get(struct block_device *, mode_t, unsigned); extern int blkdev_put(struct block_device *); -extern int blkdev_put_partition(struct block_device *); extern int bd_claim(struct block_device *, void *); extern void bd_release(struct block_device *); #ifdef CONFIG_SYSFS -- cgit v1.2.3 From d63a5a74dee87883fda6b7d170244acaac5b05e8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 8 Dec 2006 02:36:17 -0800 Subject: [PATCH] lockdep: avoid lockdep warning in md md_open takes ->reconfig_mutex which causes lockdep to complain. This (normally) doesn't have deadlock potential as the possible conflict is with a reconfig_mutex in a different device. I say "normally" because if a loop were created in the array->member hierarchy a deadlock could happen. However that causes bigger problems than a deadlock and should be fixed independently. So we flag the lock in md_open as a nested lock. This requires defining mutex_lock_interruptible_nested. Cc: Ingo Molnar Acked-by: Peter Zijlstra Acked-by: Ingo Molnar Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mutex.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/mutex.h b/include/linux/mutex.h index b2b91c47756..a7544afd758 100644 --- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -125,8 +125,10 @@ extern int fastcall mutex_lock_interruptible(struct mutex *lock); #ifdef CONFIG_DEBUG_LOCK_ALLOC extern void mutex_lock_nested(struct mutex *lock, unsigned int subclass); +extern int mutex_lock_interruptible_nested(struct mutex *lock, unsigned int subclass); #else # define mutex_lock_nested(lock, subclass) mutex_lock(lock) +# define mutex_lock_interruptible_nested(lock, subclass) mutex_lock_interruptible(lock) #endif /* -- cgit v1.2.3 From 7664c5a1da4711bb6383117f51b94c8dc8f3f1cd Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 8 Dec 2006 02:36:19 -0800 Subject: [PATCH] Generic BUG implementation This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include Cc: Andi Kleen Cc: Hugh Dickens Cc: Michael Ellerman Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Rusty Russell Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/bug.h | 16 +++++++++++++ include/asm-generic/vmlinux.lds.h | 8 +++++++ include/linux/bug.h | 47 +++++++++++++++++++++++++++++++++++++++ include/linux/module.h | 7 ++++++ 4 files changed, 78 insertions(+) create mode 100644 include/linux/bug.h (limited to 'include') diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index c92ae0f166f..47e3561638b 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -4,6 +4,22 @@ #include #ifdef CONFIG_BUG + +#ifdef CONFIG_GENERIC_BUG +#ifndef __ASSEMBLY__ +struct bug_entry { + unsigned long bug_addr; +#ifdef CONFIG_DEBUG_BUGVERBOSE + const char *file; + unsigned short line; +#endif + unsigned short flags; +}; +#endif /* __ASSEMBLY__ */ + +#define BUGFLAG_WARNING (1<<0) +#endif /* CONFIG_GENERIC_BUG */ + #ifndef HAVE_ARCH_BUG #define BUG() do { \ printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 4d4c62d1105..6e9fcebbf89 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -218,6 +218,14 @@ .stab.indexstr 0 : { *(.stab.indexstr) } \ .comment 0 : { *(.comment) } +#define BUG_TABLE \ + . = ALIGN(8); \ + __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ + __start___bug_table = .; \ + *(__bug_table) \ + __stop___bug_table = .; \ + } + #define NOTES \ .notes : { *(.note.*) } :note diff --git a/include/linux/bug.h b/include/linux/bug.h new file mode 100644 index 00000000000..42aa0a54b6f --- /dev/null +++ b/include/linux/bug.h @@ -0,0 +1,47 @@ +#ifndef _LINUX_BUG_H +#define _LINUX_BUG_H + +#include +#include + +enum bug_trap_type { + BUG_TRAP_TYPE_NONE = 0, + BUG_TRAP_TYPE_WARN = 1, + BUG_TRAP_TYPE_BUG = 2, +}; + +#ifdef CONFIG_GENERIC_BUG +#include + +static inline int is_warning_bug(const struct bug_entry *bug) +{ + return bug->flags & BUGFLAG_WARNING; +} + +const struct bug_entry *find_bug(unsigned long bugaddr); + +enum bug_trap_type report_bug(unsigned long bug_addr); + +int module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *, + struct module *); +void module_bug_cleanup(struct module *); + +/* These are defined by the architecture */ +int is_valid_bugaddr(unsigned long addr); + +#else /* !CONFIG_GENERIC_BUG */ + +static inline enum bug_trap_type report_bug(unsigned long bug_addr) +{ + return BUG_TRAP_TYPE_BUG; +} +static inline int module_bug_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *mod) +{ + return 0; +} +static inline void module_bug_cleanup(struct module *mod) {} + +#endif /* CONFIG_GENERIC_BUG */ +#endif /* _LINUX_BUG_H */ diff --git a/include/linux/module.h b/include/linux/module.h index d33df2408e0..10f771a4999 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -319,6 +319,13 @@ struct module unsigned int taints; /* same bits as kernel:tainted */ +#ifdef CONFIG_GENERIC_BUG + /* Support for BUG */ + struct list_head bug_list; + struct bug_entry *bug_table; + unsigned num_bugs; +#endif + #ifdef CONFIG_MODULE_UNLOAD /* Reference counts */ struct module_ref ref[NR_CPUS]; -- cgit v1.2.3 From 91768d6c2bad0d2766a166f13f2f57e197de3458 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 8 Dec 2006 02:36:21 -0800 Subject: [PATCH] Generic BUG for i386 This makes i386 use the generic BUG machinery. There are no functional changes from the old i386 implementation. The main advantage in using the generic BUG machinery for i386 is that the inlined overhead of BUG is just the ud2a instruction; the file+line(+function) information are no longer inlined into the instruction stream. This reduces cache pollution, and makes disassembly work properly. Signed-off-by: Jeremy Fitzhardinge Cc: Andi Kleen Cc: Hugh Dickens Cc: Michael Ellerman Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/bug.h | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/asm-i386/bug.h b/include/asm-i386/bug.h index 8062cdbf258..b0fd78ca261 100644 --- a/include/asm-i386/bug.h +++ b/include/asm-i386/bug.h @@ -4,20 +4,32 @@ /* * Tell the user there is some problem. - * The offending file and line are encoded after the "officially - * undefined" opcode for parsing in the trap handler. + * The offending file and line are encoded encoded in the __bug_table section. */ #ifdef CONFIG_BUG #define HAVE_ARCH_BUG + #ifdef CONFIG_DEBUG_BUGVERBOSE -#define BUG() \ - __asm__ __volatile__( "ud2\n" \ - "\t.word %c0\n" \ - "\t.long %c1\n" \ - : : "i" (__LINE__), "i" (__FILE__)) +#define BUG() \ + do { \ + asm volatile("1:\tud2\n" \ + ".pushsection __bug_table,\"a\"\n" \ + "2:\t.long 1b, %c0\n" \ + "\t.word %c1, 0\n" \ + "\t.org 2b+%c2\n" \ + ".popsection" \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (sizeof(struct bug_entry))); \ + for(;;) ; \ + } while(0) + #else -#define BUG() __asm__ __volatile__("ud2\n") +#define BUG() \ + do { \ + asm volatile("ud2"); \ + for(;;) ; \ + } while(0) #endif #endif -- cgit v1.2.3 From c31a0bf3e1bc581676618db7492f18798fd0a73f Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 8 Dec 2006 02:36:22 -0800 Subject: [PATCH] Generic BUG for x86-64 This makes x86-64 use the generic BUG machinery. The main advantage in using the generic BUG machinery for x86-64 is that the inlined overhead of BUG is just the ud2a instruction; the file+line information are no longer inlined into the instruction stream. This reduces cache pollution. Signed-off-by: Jeremy Fitzhardinge Cc: Andi Kleen Cc: Hugh Dickens Cc: Michael Ellerman Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-x86_64/bug.h | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'include') diff --git a/include/asm-x86_64/bug.h b/include/asm-x86_64/bug.h index 80ac1fe966a..68260641491 100644 --- a/include/asm-x86_64/bug.h +++ b/include/asm-x86_64/bug.h @@ -1,30 +1,30 @@ #ifndef __ASM_X8664_BUG_H #define __ASM_X8664_BUG_H 1 -#include - -/* - * Tell the user there is some problem. The exception handler decodes - * this frame. - */ -struct bug_frame { - unsigned char ud2[2]; - unsigned char push; - signed int filename; - unsigned char ret; - unsigned short line; -} __attribute__((packed)); - #ifdef CONFIG_BUG #define HAVE_ARCH_BUG -/* We turn the bug frame into valid instructions to not confuse - the disassembler. Thanks to Jan Beulich & Suresh Siddha - for nice instruction selection. - The magic numbers generate mov $64bitimm,%eax ; ret $offset. */ -#define BUG() \ - asm volatile( \ - "ud2 ; pushq $%c1 ; ret $%c0" :: \ - "i"(__LINE__), "i" (__FILE__)) + +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define BUG() \ + do { \ + asm volatile("1:\tud2\n" \ + ".pushsection __bug_table,\"a\"\n" \ + "2:\t.quad 1b, %c0\n" \ + "\t.word %c1, 0\n" \ + "\t.org 2b+%c2\n" \ + ".popsection" \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (sizeof(struct bug_entry))); \ + for(;;) ; \ + } while(0) +#else +#define BUG() \ + do { \ + asm volatile("ud2"); \ + for(;;) ; \ + } while(0) +#endif + void out_of_line_bug(void); #else static inline void out_of_line_bug(void) { } -- cgit v1.2.3 From e182c965b6ce0dffed0967a1be2173825a2ede2f Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 8 Dec 2006 02:36:23 -0800 Subject: [PATCH] UML: add generic BUG support The BUG changes in -mm3 need some arch support. This patch adds the UML support needed. For the most part, it was stolen from the underlying architecture. The exception is the kernel eip < PAGE_OFFSET test, which is wrong for skas mode UMLs. Signed-off-by: Jeff Dike Cc: Jeremy Fitzhardinge Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-um/bug.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-um/bug.h b/include/asm-um/bug.h index 1e22fa26ff0..3357c5e2468 100644 --- a/include/asm-um/bug.h +++ b/include/asm-um/bug.h @@ -1,4 +1,6 @@ #ifndef __UM_BUG_H #define __UM_BUG_H -#include + +#include + #endif -- cgit v1.2.3 From 30e25b71e725b150585e17888b130e3324f8cf7c Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 8 Dec 2006 02:36:24 -0800 Subject: [PATCH] Fix generic WARN_ON message A warning is a warning, not a BUG. Signed-off-by: Jeremy Fitzhardinge Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/bug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 47e3561638b..a06eecd4829 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -35,7 +35,7 @@ struct bug_entry { #define WARN_ON(condition) ({ \ typeof(condition) __ret_warn_on = (condition); \ if (unlikely(__ret_warn_on)) { \ - printk("BUG: warning at %s:%d/%s()\n", __FILE__, \ + printk("WARNING at %s:%d %s()\n", __FILE__, \ __LINE__, __FUNCTION__); \ dump_stack(); \ } \ -- cgit v1.2.3 From a5cfc1ec58a07074dacb6aa8c79eff864c966d12 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 8 Dec 2006 02:36:25 -0800 Subject: [PATCH] bit reverse library This patch provides two bit reverse functions and bit reverse table. - reverse the order of bits in a u32 value u8 bitrev8(u8 x); - reverse the order of bits in a u32 value u32 bitrev32(u32 x); - byte reverse table const u8 byte_rev_table[256]; Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/bitrev.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 include/linux/bitrev.h (limited to 'include') diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h new file mode 100644 index 00000000000..05e540d6963 --- /dev/null +++ b/include/linux/bitrev.h @@ -0,0 +1,15 @@ +#ifndef _LINUX_BITREV_H +#define _LINUX_BITREV_H + +#include + +extern u8 const byte_rev_table[256]; + +static inline u8 bitrev8(u8 byte) +{ + return byte_rev_table[byte]; +} + +extern u32 bitrev32(u32 in); + +#endif /* _LINUX_BITREV_H */ -- cgit v1.2.3 From 906d66df18faa4aac8d898ae6920d1014694a932 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 8 Dec 2006 02:36:25 -0800 Subject: [PATCH] crc32: replace bitreverse by bitrev32 This patch replaces bitreverse() by bitrev32. The only users of bitreverse() are crc32 itself and via-velocity. Cc: Jeff Garzik Cc: Matt Domsch Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/crc32.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/crc32.h b/include/linux/crc32.h index 56c0645789a..e20dd1f9b40 100644 --- a/include/linux/crc32.h +++ b/include/linux/crc32.h @@ -6,10 +6,10 @@ #define _LINUX_CRC32_H #include +#include extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len); extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); -extern u32 bitreverse(u32 in); #define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)data, length) @@ -21,7 +21,7 @@ extern u32 bitreverse(u32 in); * is in bit nr 0], thus it must be reversed before use. Except for * nics that bit swap the result internally... */ -#define ether_crc(length, data) bitreverse(crc32_le(~0, data, length)) +#define ether_crc(length, data) bitrev32(crc32_le(~0, data, length)) #define ether_crc_le(length, data) crc32_le(~0, data, length) #endif /* _LINUX_CRC32_H */ -- cgit v1.2.3 From 42cf11939becc717bd125d121a1a23415106a099 Mon Sep 17 00:00:00 2001 From: "Josef \"Jeff\" Sipek" Date: Fri, 8 Dec 2006 02:36:31 -0800 Subject: [PATCH] fsstack: Introduce fsstack_copy_{attr,inode}_* Introduce several fsstack_copy_* functions which allow stackable filesystems (such as eCryptfs and Unionfs) to easily copy over (currently only) inode attributes. This prevents code duplication and allows for code reuse. [akpm@osdl.org: Remove unneeded wrapper] [bunk@stusta.de: fs/stack.c should #include ] Signed-off-by: Josef "Jeff" Sipek Cc: Michael Halcrow Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs_stack.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 include/linux/fs_stack.h (limited to 'include') diff --git a/include/linux/fs_stack.h b/include/linux/fs_stack.h new file mode 100644 index 00000000000..bb516ceeefc --- /dev/null +++ b/include/linux/fs_stack.h @@ -0,0 +1,31 @@ +#ifndef _LINUX_FS_STACK_H +#define _LINUX_FS_STACK_H + +/* This file defines generic functions used primarily by stackable + * filesystems; none of these functions require i_mutex to be held. + */ + +#include + +/* externs for fs/stack.c */ +extern void fsstack_copy_attr_all(struct inode *dest, const struct inode *src, + int (*get_nlinks)(struct inode *)); + +extern void fsstack_copy_inode_size(struct inode *dst, const struct inode *src); + +/* inlines */ +static inline void fsstack_copy_attr_atime(struct inode *dest, + const struct inode *src) +{ + dest->i_atime = src->i_atime; +} + +static inline void fsstack_copy_attr_times(struct inode *dest, + const struct inode *src) +{ + dest->i_atime = src->i_atime; + dest->i_mtime = src->i_mtime; + dest->i_ctime = src->i_ctime; +} + +#endif /* _LINUX_FS_STACK_H */ -- cgit v1.2.3 From fec6d055da71fb02a76f9c2c12427fa79974018b Mon Sep 17 00:00:00 2001 From: "Josef \"Jeff\" Sipek" Date: Fri, 8 Dec 2006 02:36:32 -0800 Subject: [PATCH] struct path: rename Reiserfs's struct path Rename Reiserfs's struct path to struct treepath to prevent name collision between it and struct path from fs/namei.c. Signed-off-by: Josef "Jeff" Sipek Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/reiserfs_fs.h | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'include') diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index d0e4dce33ad..c3fc6caaad3 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -1159,7 +1159,7 @@ znodes are the way! */ #define PATH_READA 0x1 /* do read ahead */ #define PATH_READA_BACK 0x2 /* read backwards */ -struct path { +struct treepath { int path_length; /* Length of the array above. */ int reada; struct path_element path_elements[EXTENDED_MAX_HEIGHT]; /* Array of the path elements. */ @@ -1169,7 +1169,7 @@ struct path { #define pos_in_item(path) ((path)->pos_in_item) #define INITIALIZE_PATH(var) \ -struct path var = {.path_length = ILLEGAL_PATH_ELEMENT_OFFSET, .reada = 0,} +struct treepath var = {.path_length = ILLEGAL_PATH_ELEMENT_OFFSET, .reada = 0,} /* Get path element by path and path position. */ #define PATH_OFFSET_PELEMENT(p_s_path,n_offset) ((p_s_path)->path_elements +(n_offset)) @@ -1327,7 +1327,7 @@ struct tree_balance { int need_balance_dirty; struct super_block *tb_sb; struct reiserfs_transaction_handle *transaction_handle; - struct path *tb_path; + struct treepath *tb_path; struct buffer_head *L[MAX_HEIGHT]; /* array of left neighbors of nodes in the path */ struct buffer_head *R[MAX_HEIGHT]; /* array of right neighbors of nodes in the path */ struct buffer_head *FL[MAX_HEIGHT]; /* array of fathers of the left neighbors */ @@ -1793,41 +1793,41 @@ static inline void copy_key(struct reiserfs_key *to, memcpy(to, from, KEY_SIZE); } -int comp_items(const struct item_head *stored_ih, const struct path *p_s_path); -const struct reiserfs_key *get_rkey(const struct path *p_s_chk_path, +int comp_items(const struct item_head *stored_ih, const struct treepath *p_s_path); +const struct reiserfs_key *get_rkey(const struct treepath *p_s_chk_path, const struct super_block *p_s_sb); int search_by_key(struct super_block *, const struct cpu_key *, - struct path *, int); + struct treepath *, int); #define search_item(s,key,path) search_by_key (s, key, path, DISK_LEAF_NODE_LEVEL) int search_for_position_by_key(struct super_block *p_s_sb, const struct cpu_key *p_s_cpu_key, - struct path *p_s_search_path); + struct treepath *p_s_search_path); extern void decrement_bcount(struct buffer_head *p_s_bh); -void decrement_counters_in_path(struct path *p_s_search_path); -void pathrelse(struct path *p_s_search_path); -int reiserfs_check_path(struct path *p); -void pathrelse_and_restore(struct super_block *s, struct path *p_s_search_path); +void decrement_counters_in_path(struct treepath *p_s_search_path); +void pathrelse(struct treepath *p_s_search_path); +int reiserfs_check_path(struct treepath *p); +void pathrelse_and_restore(struct super_block *s, struct treepath *p_s_search_path); int reiserfs_insert_item(struct reiserfs_transaction_handle *th, - struct path *path, + struct treepath *path, const struct cpu_key *key, struct item_head *ih, struct inode *inode, const char *body); int reiserfs_paste_into_item(struct reiserfs_transaction_handle *th, - struct path *path, + struct treepath *path, const struct cpu_key *key, struct inode *inode, const char *body, int paste_size); int reiserfs_cut_from_item(struct reiserfs_transaction_handle *th, - struct path *path, + struct treepath *path, struct cpu_key *key, struct inode *inode, struct page *page, loff_t new_file_size); int reiserfs_delete_item(struct reiserfs_transaction_handle *th, - struct path *path, + struct treepath *path, const struct cpu_key *key, struct inode *inode, struct buffer_head *p_s_un_bh); @@ -1858,7 +1858,7 @@ void padd_item(char *item, int total_length, int length); #define GET_BLOCK_NO_DANGLE 16 /* don't leave any transactions running */ int restart_transaction(struct reiserfs_transaction_handle *th, - struct inode *inode, struct path *path); + struct inode *inode, struct treepath *path); void reiserfs_read_locked_inode(struct inode *inode, struct reiserfs_iget_args *args); int reiserfs_find_actor(struct inode *inode, void *p); @@ -1905,7 +1905,7 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr); /* namei.c */ void set_de_name_and_namelen(struct reiserfs_dir_entry *de); int search_by_entry_key(struct super_block *sb, const struct cpu_key *key, - struct path *path, struct reiserfs_dir_entry *de); + struct treepath *path, struct reiserfs_dir_entry *de); struct dentry *reiserfs_get_parent(struct dentry *); /* procfs.c */ @@ -1956,9 +1956,9 @@ extern const struct file_operations reiserfs_dir_operations; /* tail_conversion.c */ int direct2indirect(struct reiserfs_transaction_handle *, struct inode *, - struct path *, struct buffer_head *, loff_t); + struct treepath *, struct buffer_head *, loff_t); int indirect2direct(struct reiserfs_transaction_handle *, struct inode *, - struct page *, struct path *, const struct cpu_key *, + struct page *, struct treepath *, const struct cpu_key *, loff_t, char *); void reiserfs_unmap_buffer(struct buffer_head *); @@ -2045,7 +2045,7 @@ struct __reiserfs_blocknr_hint { struct inode *inode; /* inode passed to allocator, if we allocate unf. nodes */ long block; /* file offset, in blocks */ struct in_core_key key; - struct path *path; /* search path, used by allocator to deternine search_start by + struct treepath *path; /* search path, used by allocator to deternine search_start by * various ways */ struct reiserfs_transaction_handle *th; /* transaction handle is needed to log super blocks and * bitmap blocks changes */ @@ -2101,7 +2101,7 @@ static inline int reiserfs_new_form_blocknrs(struct tree_balance *tb, static inline int reiserfs_new_unf_blocknrs(struct reiserfs_transaction_handle *th, struct inode *inode, b_blocknr_t * new_blocknrs, - struct path *path, long block) + struct treepath *path, long block) { reiserfs_blocknr_hint_t hint = { .th = th, @@ -2118,7 +2118,7 @@ static inline int reiserfs_new_unf_blocknrs(struct reiserfs_transaction_handle static inline int reiserfs_new_unf_blocknrs2(struct reiserfs_transaction_handle *th, struct inode *inode, b_blocknr_t * new_blocknrs, - struct path *path, long block) + struct treepath *path, long block) { reiserfs_blocknr_hint_t hint = { .th = th, -- cgit v1.2.3 From 346f20ff6020ffa11d40b789069079c56a444ae6 Mon Sep 17 00:00:00 2001 From: "Josef \"Jeff\" Sipek" Date: Fri, 8 Dec 2006 02:36:34 -0800 Subject: [PATCH] struct path: move struct path from fs/namei.c into include/linux Moved struct path from fs/namei.c to include/linux/namei.h. This allows many places in the VFS, as well as any stackable filesystem to easily keep track of dentry-vfsmount pairs. Signed-off-by: Josef "Jeff" Sipek Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/namei.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/namei.h b/include/linux/namei.h index f5f19606eff..d39a5a67e97 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -29,6 +29,11 @@ struct nameidata { } intent; }; +struct path { + struct vfsmount *mnt; + struct dentry *dentry; +}; + /* * Type of the last component on LOOKUP_PARENT */ -- cgit v1.2.3 From 0f7fc9e4d03987fe29f6dd4aa67e4c56eb7ecb05 Mon Sep 17 00:00:00 2001 From: "Josef \"Jeff\" Sipek" Date: Fri, 8 Dec 2006 02:36:35 -0800 Subject: [PATCH] VFS: change struct file to use struct path This patch changes struct file to use struct path instead of having independent pointers to struct dentry and struct vfsmount, and converts all users of f_{dentry,vfsmnt} in fs/ to use f_path.{dentry,mnt}. Additionally, it adds two #define's to make the transition easier for users of the f_dentry and f_vfsmnt. Signed-off-by: Josef "Jeff" Sipek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 10 ++++++---- include/linux/fsnotify.h | 2 +- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 45f2cabb8c7..adce6e1d70c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -269,6 +269,7 @@ extern int dir_notify_enable; #include #include #include +#include #include #include #include @@ -711,8 +712,9 @@ struct file { struct list_head fu_list; struct rcu_head fu_rcuhead; } f_u; - struct dentry *f_dentry; - struct vfsmount *f_vfsmnt; + struct path f_path; +#define f_dentry f_path.dentry +#define f_vfsmnt f_path.mnt const struct file_operations *f_op; atomic_t f_count; unsigned int f_flags; @@ -1224,7 +1226,7 @@ extern void touch_atime(struct vfsmount *mnt, struct dentry *dentry); static inline void file_accessed(struct file *file) { if (!(file->f_flags & O_NOATIME)) - touch_atime(file->f_vfsmnt, file->f_dentry); + touch_atime(file->f_path.mnt, file->f_path.dentry); } int sync_inode(struct inode *inode, struct writeback_control *wbc); @@ -1615,7 +1617,7 @@ static inline void put_write_access(struct inode * inode) static inline void allow_write_access(struct file *file) { if (file) - atomic_inc(&file->f_dentry->d_inode->i_writecount); + atomic_inc(&file->f_path.dentry->d_inode->i_writecount); } extern int do_pipe(int *); extern struct file *create_read_pipe(struct file *f); diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index d4f219ffaa5..dfc4e4f68da 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -164,7 +164,7 @@ static inline void fsnotify_open(struct dentry *dentry) */ static inline void fsnotify_close(struct file *file) { - struct dentry *dentry = file->f_dentry; + struct dentry *dentry = file->f_path.dentry; struct inode *inode = dentry->d_inode; const char *name = dentry->d_name.name; mode_t mode = file->f_mode; -- cgit v1.2.3 From 225a719f79fbc4d0cd9d9ebc5b2e3ac0e95845aa Mon Sep 17 00:00:00 2001 From: Josef Sipek Date: Fri, 8 Dec 2006 02:37:18 -0800 Subject: [PATCH] struct path: convert lockd Signed-off-by: Josef Sipek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lockd/lockd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 8c39654549d..0c962b82a9d 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -206,7 +206,7 @@ void nlmsvc_invalidate_all(void); static __inline__ struct inode * nlmsvc_file_inode(struct nlm_file *file) { - return file->f_file->f_dentry->d_inode; + return file->f_file->f_path.dentry->d_inode; } /* -- cgit v1.2.3 From f0d1b0b30d250a07627ad8b9fbbb5c7cc08422e8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Dec 2006 02:37:49 -0800 Subject: [PATCH] LOG2: Implement a general integer log2 facility in the kernel This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Herbert Xu Cc: David Howells Cc: Wojtek Kaniewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-frv/bitops.h | 44 ++++++++++++++++ include/linux/kernel.h | 9 +--- include/linux/log2.h | 131 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 176 insertions(+), 8 deletions(-) create mode 100644 include/linux/log2.h (limited to 'include') diff --git a/include/asm-frv/bitops.h b/include/asm-frv/bitops.h index 1f70d47148b..f8560edf59f 100644 --- a/include/asm-frv/bitops.h +++ b/include/asm-frv/bitops.h @@ -256,6 +256,50 @@ int __ffs(unsigned long x) return 31 - bit; } +/* + * special slimline version of fls() for calculating ilog2_u32() + * - note: no protection against n == 0 + */ +#define ARCH_HAS_ILOG2_U32 +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n)); + return 31 - bit; +} + +/* + * special slimline version of fls64() for calculating ilog2_u64() + * - note: no protection against n == 0 + */ +#define ARCH_HAS_ILOG2_U64 +static inline __attribute__((const)) +int __ilog2_u64(u64 n) +{ + union { + u64 ll; + struct { u32 h, l; }; + } _; + int bit, x, y; + + _.ll = n; + + asm(" subcc %3,gr0,gr0,icc0 \n" + " ckeq icc0,cc4 \n" + " cscan.p %3,gr0,%0 ,cc4,0 \n" + " setlos #63,%1 \n" + " cscan.p %4,gr0,%0 ,cc4,1 \n" + " setlos #31,%2 \n" + " csub.p %1,%0,%0 ,cc4,0 \n" + " csub %2,%0,%0 ,cc4,1 \n" + : "=&r"(bit), "=r"(x), "=r"(y) + : "0r"(_.h), "r"(_.l) + : "icc0", "cc4" + ); + return bit; +} + #include #include diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 6738283ac38..3710cce1664 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -157,14 +158,6 @@ static inline int printk(const char *s, ...) { return 0; } unsigned long int_sqrt(unsigned long); -static inline int __attribute_pure__ long_log2(unsigned long x) -{ - int r = 0; - for (x >>= 1; x > 0; x >>= 1) - r++; - return r; -} - static inline unsigned long __attribute_const__ roundup_pow_of_two(unsigned long x) { diff --git a/include/linux/log2.h b/include/linux/log2.h new file mode 100644 index 00000000000..3979c60325f --- /dev/null +++ b/include/linux/log2.h @@ -0,0 +1,131 @@ +/* Integer base 2 logarithm calculation + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_LOG2_H +#define _LINUX_LOG2_H + +#include +#include + +/* + * deal with unrepresentable constant logarithms + */ +extern __attribute__((const, noreturn)) +int ____ilog2_NaN(void); + +/* + * non-constant log of base 2 calculators + * - the arch may override these in asm/bitops.h if they can be implemented + * more efficiently than using fls() and fls64() + * - the arch is not required to handle n==0 if implementing the fallback + */ +#ifndef CONFIG_ARCH_HAS_ILOG2_U32 +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + return fls(n) - 1; +} +#endif + +#ifndef CONFIG_ARCH_HAS_ILOG2_U64 +static inline __attribute__((const)) +int __ilog2_u64(u64 n) +{ + return fls64(n) - 1; +} +#endif + +/** + * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value + * @n - parameter + * + * constant-capable log of base 2 calculation + * - this can be used to initialise global variables from constant data, hence + * the massive ternary operator construction + * + * selects the appropriately-sized optimised version depending on sizeof(n) + */ +#define ilog2(n) \ +( \ + __builtin_constant_p(n) ? ( \ + (n) < 1 ? ____ilog2_NaN() : \ + (n) & (1ULL << 63) ? 63 : \ + (n) & (1ULL << 62) ? 62 : \ + (n) & (1ULL << 61) ? 61 : \ + (n) & (1ULL << 60) ? 60 : \ + (n) & (1ULL << 59) ? 59 : \ + (n) & (1ULL << 58) ? 58 : \ + (n) & (1ULL << 57) ? 57 : \ + (n) & (1ULL << 56) ? 56 : \ + (n) & (1ULL << 55) ? 55 : \ + (n) & (1ULL << 54) ? 54 : \ + (n) & (1ULL << 53) ? 53 : \ + (n) & (1ULL << 52) ? 52 : \ + (n) & (1ULL << 51) ? 51 : \ + (n) & (1ULL << 50) ? 50 : \ + (n) & (1ULL << 49) ? 49 : \ + (n) & (1ULL << 48) ? 48 : \ + (n) & (1ULL << 47) ? 47 : \ + (n) & (1ULL << 46) ? 46 : \ + (n) & (1ULL << 45) ? 45 : \ + (n) & (1ULL << 44) ? 44 : \ + (n) & (1ULL << 43) ? 43 : \ + (n) & (1ULL << 42) ? 42 : \ + (n) & (1ULL << 41) ? 41 : \ + (n) & (1ULL << 40) ? 40 : \ + (n) & (1ULL << 39) ? 39 : \ + (n) & (1ULL << 38) ? 38 : \ + (n) & (1ULL << 37) ? 37 : \ + (n) & (1ULL << 36) ? 36 : \ + (n) & (1ULL << 35) ? 35 : \ + (n) & (1ULL << 34) ? 34 : \ + (n) & (1ULL << 33) ? 33 : \ + (n) & (1ULL << 32) ? 32 : \ + (n) & (1ULL << 31) ? 31 : \ + (n) & (1ULL << 30) ? 30 : \ + (n) & (1ULL << 29) ? 29 : \ + (n) & (1ULL << 28) ? 28 : \ + (n) & (1ULL << 27) ? 27 : \ + (n) & (1ULL << 26) ? 26 : \ + (n) & (1ULL << 25) ? 25 : \ + (n) & (1ULL << 24) ? 24 : \ + (n) & (1ULL << 23) ? 23 : \ + (n) & (1ULL << 22) ? 22 : \ + (n) & (1ULL << 21) ? 21 : \ + (n) & (1ULL << 20) ? 20 : \ + (n) & (1ULL << 19) ? 19 : \ + (n) & (1ULL << 18) ? 18 : \ + (n) & (1ULL << 17) ? 17 : \ + (n) & (1ULL << 16) ? 16 : \ + (n) & (1ULL << 15) ? 15 : \ + (n) & (1ULL << 14) ? 14 : \ + (n) & (1ULL << 13) ? 13 : \ + (n) & (1ULL << 12) ? 12 : \ + (n) & (1ULL << 11) ? 11 : \ + (n) & (1ULL << 10) ? 10 : \ + (n) & (1ULL << 9) ? 9 : \ + (n) & (1ULL << 8) ? 8 : \ + (n) & (1ULL << 7) ? 7 : \ + (n) & (1ULL << 6) ? 6 : \ + (n) & (1ULL << 5) ? 5 : \ + (n) & (1ULL << 4) ? 4 : \ + (n) & (1ULL << 3) ? 3 : \ + (n) & (1ULL << 2) ? 2 : \ + (n) & (1ULL << 1) ? 1 : \ + (n) & (1ULL << 0) ? 0 : \ + ____ilog2_NaN() \ + ) : \ + (sizeof(n) <= 4) ? \ + __ilog2_u32(n) : \ + __ilog2_u64(n) \ + ) + +#endif /* _LINUX_LOG2_H */ -- cgit v1.2.3 From 312a0c170945b49f319960afd2e492c05f9dd551 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Dec 2006 02:37:51 -0800 Subject: [PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant Alter roundup_pow_of_two() so that it can make use of ilog2() on a constant to produce a constant value, retaining the ability for an arch to override it in the non-const case. This permits the function to be used to initialise variables. Signed-off-by: David Howells Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 6 ------ include/linux/log2.h | 26 ++++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 3710cce1664..e8bfac34d2b 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -158,12 +158,6 @@ static inline int printk(const char *s, ...) { return 0; } unsigned long int_sqrt(unsigned long); -static inline unsigned long -__attribute_const__ roundup_pow_of_two(unsigned long x) -{ - return 1UL << fls_long(x - 1); -} - extern int printk_ratelimit(void); extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst); extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, diff --git a/include/linux/log2.h b/include/linux/log2.h index 3979c60325f..d02e1a547a7 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -43,6 +43,15 @@ int __ilog2_u64(u64 n) } #endif +/* + * round up to nearest power of two + */ +static inline __attribute__((const)) +unsigned long __roundup_pow_of_two(unsigned long n) +{ + return 1UL << fls_long(n - 1); +} + /** * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value * @n - parameter @@ -128,4 +137,21 @@ int __ilog2_u64(u64 n) __ilog2_u64(n) \ ) +/** + * roundup_pow_of_two - round the given value up to nearest power of two + * @n - parameter + * + * round the given balue up to the nearest power of two + * - the result is undefined when n == 0 + * - this can be used to initialise global variables from constant data + */ +#define roundup_pow_of_two(n) \ +( \ + __builtin_constant_p(n) ? ( \ + (n == 1) ? 0 : \ + (1UL << (ilog2((n) - 1) + 1)) \ + ) : \ + __roundup_pow_of_two(n) \ + ) + #endif /* _LINUX_LOG2_H */ -- cgit v1.2.3 From 39d61db0edb34d60b83c5e0d62d0e906578cc707 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Dec 2006 02:37:52 -0800 Subject: [PATCH] LOG2: Alter get_order() so that it can make use of ilog2() on a constant Alter get_order() so that it can make use of ilog2() on a constant to produce a constant value, retaining the ability for an arch to override it in the non-const case. Signed-off-by: David Howells Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/page.h | 38 ++++++++++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-generic/page.h b/include/asm-generic/page.h index a96b5d986b6..b55052ce233 100644 --- a/include/asm-generic/page.h +++ b/include/asm-generic/page.h @@ -4,21 +4,51 @@ #ifdef __KERNEL__ #ifndef __ASSEMBLY__ -#include +#include -/* Pure 2^n version of get_order */ -static __inline__ __attribute_const__ int get_order(unsigned long size) +/* + * non-const pure 2^n version of get_order + * - the arch may override these in asm/bitops.h if they can be implemented + * more efficiently than using the arch log2 routines + * - we use the non-const log2() instead if the arch has defined one suitable + */ +#ifndef ARCH_HAS_GET_ORDER +static inline __attribute__((const)) +int __get_order(unsigned long size, int page_shift) { +#if BITS_PER_LONG == 32 && defined(ARCH_HAS_ILOG2_U32) + int order = __ilog2_u32(size) - page_shift; + return order >= 0 ? order : 0; +#elif BITS_PER_LONG == 64 && defined(ARCH_HAS_ILOG2_U64) + int order = __ilog2_u64(size) - page_shift; + return order >= 0 ? order : 0; +#else int order; - size = (size - 1) >> (PAGE_SHIFT - 1); + size = (size - 1) >> (page_shift - 1); order = -1; do { size >>= 1; order++; } while (size); return order; +#endif } +#endif + +/** + * get_order - calculate log2(pages) to hold a block of the specified size + * @n - size + * + * calculate allocation order based on the current page size + * - this can be used to initialise global variables from constant data + */ +#define get_order(n) \ +( \ + __builtin_constant_p(n) ? \ + ((n < (1UL << PAGE_SHIFT)) ? 0 : ilog2(n) - PAGE_SHIFT) : \ + __get_order(n, PAGE_SHIFT) \ + ) #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ -- cgit v1.2.3 From ef55d53caa055aedee13e77da82740987dd64f2d Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Dec 2006 02:37:53 -0800 Subject: [PATCH] LOG2: Provide ilog2() fallbacks for powerpc Provide ilog2() fallbacks for powerpc for 32-bit numbers and 64-bit numbers on ppc64. Signed-off-by: David Howells Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-powerpc/bitops.h | 21 ++++++++++++++++++++- include/asm-powerpc/page_32.h | 10 +--------- 2 files changed, 21 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h index c341063d080..0288144ea02 100644 --- a/include/asm-powerpc/bitops.h +++ b/include/asm-powerpc/bitops.h @@ -190,7 +190,8 @@ static __inline__ void set_bits(unsigned long mask, unsigned long *addr) * Return the zero-based bit position (LE, not IBM bit numbering) of * the most significant 1-bit in a double word. */ -static __inline__ int __ilog2(unsigned long x) +static __inline__ __attribute__((const)) +int __ilog2(unsigned long x) { int lz; @@ -198,6 +199,24 @@ static __inline__ int __ilog2(unsigned long x) return BITS_PER_LONG - 1 - lz; } +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); + return 31 - bit; +} + +#ifdef __powerpc64__ +static inline __attribute__((const)) +int __ilog2_u64(u32 n) +{ + int bit; + asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n)); + return 63 - bit; +} +#endif + /* * Determines the bit position of the least significant 0 bit in the * specified double word. The returned bit position will be diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h index 2677bad70f4..07f6d3cf5e5 100644 --- a/include/asm-powerpc/page_32.h +++ b/include/asm-powerpc/page_32.h @@ -26,15 +26,7 @@ extern void clear_pages(void *page, int order); static inline void clear_page(void *page) { clear_pages(page, 0); } extern void copy_page(void *to, void *from); -/* Pure 2^n version of get_order */ -extern __inline__ int get_order(unsigned long size) -{ - int lz; - - size = (size-1) >> PAGE_SHIFT; - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); - return 32 - lz; -} +#include #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From 937949d9edbf4049bd41af6c9f92c26280584564 Mon Sep 17 00:00:00 2001 From: Cedric Le Goater Date: Fri, 8 Dec 2006 02:37:54 -0800 Subject: [PATCH] add process_session() helper routine Replace occurences of task->signal->session by a new process_session() helper routine. It will be useful for pid namespaces to abstract the session pid number. Signed-off-by: Cedric Le Goater Cc: Kirill Korotaev Cc: Eric W. Biederman Cc: Herbert Poetzl Cc: Sukadev Bhattiprolu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index 5e8a0ba6174..270d864a8ff 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1047,6 +1047,11 @@ static inline pid_t process_group(struct task_struct *tsk) return tsk->signal->pgrp; } +static inline pid_t process_session(struct task_struct *tsk) +{ + return tsk->signal->session; +} + static inline struct pid *task_pid(struct task_struct *task) { return task->pids[PIDTYPE_PID].pid; -- cgit v1.2.3 From 1ec320afdc9552c92191d5f89fcd1ebe588334ca Mon Sep 17 00:00:00 2001 From: Cedric Le Goater Date: Fri, 8 Dec 2006 02:37:55 -0800 Subject: [PATCH] add process_session() helper routine: deprecate old field Add an anonymous union and ((deprecated)) to catch direct usage of the session field. [akpm@osdl.org: fix various missed conversions] [jdike@addtoit.com: fix UML bug] Signed-off-by: Jeff Dike Cc: Cedric Le Goater Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 11 ++++++----- include/linux/sched.h | 19 +++++++++++++++++-- 2 files changed, 23 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 733790d4f7d..848a68af3d4 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -57,17 +57,18 @@ .cpu_vm_mask = CPU_MASK_ALL, \ } -#define INIT_SIGNALS(sig) { \ - .count = ATOMIC_INIT(1), \ +#define INIT_SIGNALS(sig) { \ + .count = ATOMIC_INIT(1), \ .wait_chldexit = __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\ - .shared_pending = { \ + .shared_pending = { \ .list = LIST_HEAD_INIT(sig.shared_pending.list), \ - .signal = {{0}}}, \ + .signal = {{0}}}, \ .posix_timers = LIST_HEAD_INIT(sig.posix_timers), \ .cpu_timers = INIT_CPU_TIMERS(sig.cpu_timers), \ .rlim = INIT_RLIMITS, \ .pgrp = 1, \ - .session = 1, \ + .tty_old_pgrp = 0, \ + { .__session = 1}, \ } extern struct nsproxy init_nsproxy; diff --git a/include/linux/sched.h b/include/linux/sched.h index 270d864a8ff..6fec1d41971 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -436,7 +436,12 @@ struct signal_struct { /* job control IDs */ pid_t pgrp; pid_t tty_old_pgrp; - pid_t session; + + union { + pid_t session __deprecated; + pid_t __session; + }; + /* boolean value for session group leader */ int leader; @@ -1047,9 +1052,19 @@ static inline pid_t process_group(struct task_struct *tsk) return tsk->signal->pgrp; } +static inline pid_t signal_session(struct signal_struct *sig) +{ + return sig->__session; +} + static inline pid_t process_session(struct task_struct *tsk) { - return tsk->signal->session; + return signal_session(tsk->signal); +} + +static inline void set_signal_session(struct signal_struct *sig, pid_t session) +{ + sig->__session = session; } static inline struct pid *task_pid(struct task_struct *task) -- cgit v1.2.3 From 6b3286ed1169d74fea401367d6d4d6c6ec758a81 Mon Sep 17 00:00:00 2001 From: Kirill Korotaev Date: Fri, 8 Dec 2006 02:37:56 -0800 Subject: [PATCH] rename struct namespace to struct mnt_namespace Rename 'struct namespace' to 'struct mnt_namespace' to avoid confusion with other namespaces being developped for the containers : pid, uts, ipc, etc. 'namespace' variables and attributes are also renamed to 'mnt_ns' Signed-off-by: Kirill Korotaev Signed-off-by: Cedric Le Goater Cc: Eric W. Biederman Cc: Herbert Poetzl Cc: Sukadev Bhattiprolu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 2 +- include/linux/mnt_namespace.h | 42 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mount.h | 4 ++-- include/linux/namespace.h | 42 ------------------------------------------ include/linux/nsproxy.h | 4 ++-- 5 files changed, 47 insertions(+), 47 deletions(-) create mode 100644 include/linux/mnt_namespace.h delete mode 100644 include/linux/namespace.h (limited to 'include') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 848a68af3d4..5c4989172f7 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -76,7 +76,7 @@ extern struct nsproxy init_nsproxy; .count = ATOMIC_INIT(1), \ .nslock = __SPIN_LOCK_UNLOCKED(nsproxy.nslock), \ .uts_ns = &init_uts_ns, \ - .namespace = NULL, \ + .mnt_ns = NULL, \ INIT_IPC_NS(ipc_ns) \ } diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h new file mode 100644 index 00000000000..4af0b1fc282 --- /dev/null +++ b/include/linux/mnt_namespace.h @@ -0,0 +1,42 @@ +#ifndef _NAMESPACE_H_ +#define _NAMESPACE_H_ +#ifdef __KERNEL__ + +#include +#include +#include + +struct mnt_namespace { + atomic_t count; + struct vfsmount * root; + struct list_head list; + wait_queue_head_t poll; + int event; +}; + +extern int copy_mnt_ns(int, struct task_struct *); +extern void __put_mnt_ns(struct mnt_namespace *ns); +extern struct mnt_namespace *dup_mnt_ns(struct task_struct *, + struct fs_struct *); + +static inline void put_mnt_ns(struct mnt_namespace *ns) +{ + if (atomic_dec_and_lock(&ns->count, &vfsmount_lock)) + /* releases vfsmount_lock */ + __put_mnt_ns(ns); +} + +static inline void exit_mnt_ns(struct task_struct *p) +{ + struct mnt_namespace *ns = p->nsproxy->mnt_ns; + if (ns) + put_mnt_ns(ns); +} + +static inline void get_mnt_ns(struct mnt_namespace *ns) +{ + atomic_inc(&ns->count); +} + +#endif +#endif diff --git a/include/linux/mount.h b/include/linux/mount.h index 403d1a97c51..e357dc86a4d 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -20,7 +20,7 @@ struct super_block; struct vfsmount; struct dentry; -struct namespace; +struct mnt_namespace; #define MNT_NOSUID 0x01 #define MNT_NODEV 0x02 @@ -52,7 +52,7 @@ struct vfsmount { struct list_head mnt_slave_list;/* list of slave mounts */ struct list_head mnt_slave; /* slave list entry */ struct vfsmount *mnt_master; /* slave is on master->mnt_slave_list */ - struct namespace *mnt_namespace; /* containing namespace */ + struct mnt_namespace *mnt_ns; /* containing namespace */ int mnt_pinned; }; diff --git a/include/linux/namespace.h b/include/linux/namespace.h deleted file mode 100644 index d137009f0b2..00000000000 --- a/include/linux/namespace.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _NAMESPACE_H_ -#define _NAMESPACE_H_ -#ifdef __KERNEL__ - -#include -#include -#include - -struct namespace { - atomic_t count; - struct vfsmount * root; - struct list_head list; - wait_queue_head_t poll; - int event; -}; - -extern int copy_namespace(int, struct task_struct *); -extern void __put_namespace(struct namespace *namespace); -extern struct namespace *dup_namespace(struct task_struct *, struct fs_struct *); - -static inline void put_namespace(struct namespace *namespace) -{ - if (atomic_dec_and_lock(&namespace->count, &vfsmount_lock)) - /* releases vfsmount_lock */ - __put_namespace(namespace); -} - -static inline void exit_namespace(struct task_struct *p) -{ - struct namespace *namespace = p->nsproxy->namespace; - if (namespace) { - put_namespace(namespace); - } -} - -static inline void get_namespace(struct namespace *namespace) -{ - atomic_inc(&namespace->count); -} - -#endif -#endif diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index 971d1c6dfc4..0aba1b1a39c 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -4,7 +4,7 @@ #include #include -struct namespace; +struct mnt_namespace; struct uts_namespace; struct ipc_namespace; @@ -25,7 +25,7 @@ struct nsproxy { spinlock_t nslock; struct uts_namespace *uts_ns; struct ipc_namespace *ipc_ns; - struct namespace *namespace; + struct mnt_namespace *mnt_ns; }; extern struct nsproxy init_nsproxy; -- cgit v1.2.3 From 373beb35cd6b625e0ba4ad98baace12310a26aa8 Mon Sep 17 00:00:00 2001 From: Cedric Le Goater Date: Fri, 8 Dec 2006 02:37:57 -0800 Subject: [PATCH] identifier to nsproxy Add an identifier to nsproxy. The default init_ns_proxy has identifier 0 and allocated nsproxies are given -1. This identifier will be used by a new syscall sys_bind_ns. Signed-off-by: Cedric Le Goater Cc: Kirill Korotaev Cc: Eric W. Biederman Cc: Herbert Poetzl Cc: Sukadev Bhattiprolu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 1 + include/linux/nsproxy.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 5c4989172f7..90c5f9a0773 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -75,6 +75,7 @@ extern struct nsproxy init_nsproxy; #define INIT_NSPROXY(nsproxy) { \ .count = ATOMIC_INIT(1), \ .nslock = __SPIN_LOCK_UNLOCKED(nsproxy.nslock), \ + .id = 0, \ .uts_ns = &init_uts_ns, \ .mnt_ns = NULL, \ INIT_IPC_NS(ipc_ns) \ diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index 0aba1b1a39c..27f37c1ec1d 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -23,6 +23,7 @@ struct ipc_namespace; struct nsproxy { atomic_t count; spinlock_t nslock; + unsigned long id; struct uts_namespace *uts_ns; struct ipc_namespace *ipc_ns; struct mnt_namespace *mnt_ns; -- cgit v1.2.3 From 61a58c6c238cc81f7742b8cc84212cc55fb57747 Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Fri, 8 Dec 2006 02:37:58 -0800 Subject: [PATCH] rename struct pspace to struct pid_namespace Rename struct pspace to struct pid_namespace for consistency with other namespaces (uts_namespace and ipc_namespace). Also rename include/linux/pspace.h to include/linux/pid_namespace.h and variables from pspace to pid_ns. Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Cedric Le Goater Cc: Kirill Korotaev Cc: Eric W. Biederman Cc: Herbert Poetzl Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pid_namespace.h | 23 +++++++++++++++++++++++ include/linux/pspace.h | 23 ----------------------- 2 files changed, 23 insertions(+), 23 deletions(-) create mode 100644 include/linux/pid_namespace.h delete mode 100644 include/linux/pspace.h (limited to 'include') diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h new file mode 100644 index 00000000000..54d79095e29 --- /dev/null +++ b/include/linux/pid_namespace.h @@ -0,0 +1,23 @@ +#ifndef _LINUX_PID_NS_H +#define _LINUX_PID_NS_H + +#include +#include +#include +#include + +struct pidmap { + atomic_t nr_free; + void *page; +}; + +#define PIDMAP_ENTRIES ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8) + +struct pid_namespace { + struct pidmap pidmap[PIDMAP_ENTRIES]; + int last_pid; +}; + +extern struct pid_namespace init_pid_ns; + +#endif /* _LINUX_PID_NS_H */ diff --git a/include/linux/pspace.h b/include/linux/pspace.h deleted file mode 100644 index 91d48b8b2d9..00000000000 --- a/include/linux/pspace.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _LINUX_PSPACE_H -#define _LINUX_PSPACE_H - -#include -#include -#include -#include - -struct pidmap { - atomic_t nr_free; - void *page; -}; - -#define PIDMAP_ENTRIES ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8) - -struct pspace { - struct pidmap pidmap[PIDMAP_ENTRIES]; - int last_pid; -}; - -extern struct pspace init_pspace; - -#endif /* _LINUX_PSPACE_H */ -- cgit v1.2.3 From 9a575a92db3312a40cdf0b0406d88de88ad9741e Mon Sep 17 00:00:00 2001 From: Cedric Le Goater Date: Fri, 8 Dec 2006 02:37:59 -0800 Subject: [PATCH] to nsproxy Add the pid namespace framework to the nsproxy object. The copy of the pid namespace only increases the refcount on the global pid namespace, init_pid_ns, and unshare is not implemented. There is no configuration option to activate or deactivate this feature because this not relevant for the moment. Signed-off-by: Cedric Le Goater Cc: Kirill Korotaev Cc: Eric W. Biederman Cc: Herbert Poetzl Cc: Sukadev Bhattiprolu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 2 ++ include/linux/nsproxy.h | 2 ++ include/linux/pid_namespace.h | 20 ++++++++++++++++++-- 3 files changed, 22 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 90c5f9a0773..7272ff9ee77 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -7,6 +7,7 @@ #include #include #include +#include #define INIT_FDTABLE \ { \ @@ -73,6 +74,7 @@ extern struct nsproxy init_nsproxy; #define INIT_NSPROXY(nsproxy) { \ + .pid_ns = &init_pid_ns, \ .count = ATOMIC_INIT(1), \ .nslock = __SPIN_LOCK_UNLOCKED(nsproxy.nslock), \ .id = 0, \ diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index 27f37c1ec1d..fdfb0e44912 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -7,6 +7,7 @@ struct mnt_namespace; struct uts_namespace; struct ipc_namespace; +struct pid_namespace; /* * A structure to contain pointers to all per-process @@ -27,6 +28,7 @@ struct nsproxy { struct uts_namespace *uts_ns; struct ipc_namespace *ipc_ns; struct mnt_namespace *mnt_ns; + struct pid_namespace *pid_ns; }; extern struct nsproxy init_nsproxy; diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index 54d79095e29..76e7c6b2cf3 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -5,6 +5,8 @@ #include #include #include +#include +#include struct pidmap { atomic_t nr_free; @@ -14,10 +16,24 @@ struct pidmap { #define PIDMAP_ENTRIES ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8) struct pid_namespace { - struct pidmap pidmap[PIDMAP_ENTRIES]; - int last_pid; + struct kref kref; + struct pidmap pidmap[PIDMAP_ENTRIES]; + int last_pid; }; extern struct pid_namespace init_pid_ns; +static inline void get_pid_ns(struct pid_namespace *ns) +{ + kref_get(&ns->kref); +} + +extern int copy_pid_ns(int flags, struct task_struct *tsk); +extern void free_pid_ns(struct kref *kref); + +static inline void put_pid_ns(struct pid_namespace *ns) +{ + kref_put(&ns->kref, free_pid_ns); +} + #endif /* _LINUX_PID_NS_H */ -- cgit v1.2.3 From 84d737866e2babdeab0c6b18ea155c6a649663b8 Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Fri, 8 Dec 2006 02:38:01 -0800 Subject: [PATCH] add child reaper to pid_namespace Add a per pid_namespace child-reaper. This is needed so processes are reaped within the same pid space and do not spill over to the parent pid space. Its also needed so containers preserve existing semantic that pid == 1 would reap orphaned children. This is based on Eric Biederman's patch: http://lkml.org/lkml/2006/2/6/285 Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Cedric Le Goater Cc: Kirill Korotaev Cc: Eric W. Biederman Cc: Herbert Poetzl Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pid.h | 5 +++-- include/linux/pid_namespace.h | 6 ++++++ include/linux/sched.h | 1 - 3 files changed, 9 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/pid.h b/include/linux/pid.h index 2c0007d1721..4dec047b183 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -35,8 +35,9 @@ enum pid_type * * Holding a reference to struct pid solves both of these problems. * It is small so holding a reference does not consume a lot of - * resources, and since a new struct pid is allocated when the numeric - * pid value is reused we don't mistakenly refer to new processes. + * resources, and since a new struct pid is allocated when the numeric pid + * value is reused (when pids wrap around) we don't mistakenly refer to new + * processes. */ struct pid diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index 76e7c6b2cf3..d2a9d419f01 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -19,6 +19,7 @@ struct pid_namespace { struct kref kref; struct pidmap pidmap[PIDMAP_ENTRIES]; int last_pid; + struct task_struct *child_reaper; }; extern struct pid_namespace init_pid_ns; @@ -36,4 +37,9 @@ static inline void put_pid_ns(struct pid_namespace *ns) kref_put(&ns->kref, free_pid_ns); } +static inline struct task_struct *child_reaper(struct task_struct *tsk) +{ + return tsk->nsproxy->pid_ns->child_reaper; +} + #endif /* _LINUX_PID_NS_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 6fec1d41971..f0317edea14 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1400,7 +1400,6 @@ extern NORET_TYPE void do_group_exit(int); extern void daemonize(const char *, ...); extern int allow_signal(int); extern int disallow_signal(int); -extern struct task_struct *child_reaper; extern int do_execve(char *, char __user * __user *, char __user * __user *, struct pt_regs *); extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *); -- cgit v1.2.3 From 3306ce3d0554e2e59cc429b7133e17e1513307cb Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:38:13 -0800 Subject: [PATCH] Char: mxser_new, upgrade to 1.9.1 Change cloned experimental driver according to original 1.9.1 moxa driver. Some int->ulong conversions, outb ~UART_IER_THRI constant. Remove commented stuff. I also added printk line with info, if somebody wants to test it, he may contact me as I can potentially debug the driver with him or just to confirm it works properly. Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pci_ids.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4d972bbef31..51180dba9a9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1785,14 +1785,17 @@ #define PCI_DEVICE_ID_MOXA_C104 0x1040 #define PCI_DEVICE_ID_MOXA_CP104U 0x1041 #define PCI_DEVICE_ID_MOXA_CP104JU 0x1042 +#define PCI_DEVICE_ID_MOXA_CP104EL 0x1043 #define PCI_DEVICE_ID_MOXA_CT114 0x1140 #define PCI_DEVICE_ID_MOXA_CP114 0x1141 #define PCI_DEVICE_ID_MOXA_CP118U 0x1180 +#define PCI_DEVICE_ID_MOXA_CP118EL 0x1181 #define PCI_DEVICE_ID_MOXA_CP132 0x1320 #define PCI_DEVICE_ID_MOXA_CP132U 0x1321 #define PCI_DEVICE_ID_MOXA_CP134U 0x1340 #define PCI_DEVICE_ID_MOXA_C168 0x1680 #define PCI_DEVICE_ID_MOXA_CP168U 0x1681 +#define PCI_DEVICE_ID_MOXA_CP168EL 0x1682 #define PCI_VENDOR_ID_CCD 0x1397 #define PCI_DEVICE_ID_CCD_2BD0 0x2bd0 -- cgit v1.2.3 From ca7ed0f22f4876986b2eb1fbd80ba78e07fd69d5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:38:39 -0800 Subject: [PATCH] Char: stallion, kill typedefs Typedefs are considered ugly in the kernel. Eliminate them. Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/stallion.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/linux/stallion.h b/include/linux/stallion.h index 13a37f137ea..ef5270b83d0 100644 --- a/include/linux/stallion.h +++ b/include/linux/stallion.h @@ -52,11 +52,11 @@ * protection - since "write" code only needs to change the head, and * interrupt code only needs to change the tail. */ -typedef struct { +struct stlrq { char *buf; char *head; char *tail; -} stlrq_t; +}; /* * Port, panel and board structures to hold status info about each. @@ -67,7 +67,7 @@ typedef struct { * is associated with, this makes it (fairly) easy to get back to the * board/panel info for a port. */ -typedef struct stlport { +struct stlport { unsigned long magic; int portnr; int panelnr; @@ -97,10 +97,10 @@ typedef struct stlport { wait_queue_head_t close_wait; struct work_struct tqueue; comstats_t stats; - stlrq_t tx; -} stlport_t; + struct stlrq tx; +}; -typedef struct stlpanel { +struct stlpanel { unsigned long magic; int panelnr; int brdnr; @@ -111,10 +111,10 @@ typedef struct stlpanel { void (*isr)(struct stlpanel *panelp, unsigned int iobase); unsigned int hwid; unsigned int ackmask; - stlport_t *ports[STL_PORTSPERPANEL]; -} stlpanel_t; + struct stlport *ports[STL_PORTSPERPANEL]; +}; -typedef struct stlbrd { +struct stlbrd { unsigned long magic; int brdnr; int brdtype; @@ -136,9 +136,9 @@ typedef struct stlbrd { unsigned long clk; unsigned int bnkpageaddr[STL_MAXBANKS]; unsigned int bnkstataddr[STL_MAXBANKS]; - stlpanel_t *bnk2panel[STL_MAXBANKS]; - stlpanel_t *panels[STL_MAXPANELS]; -} stlbrd_t; + struct stlpanel *bnk2panel[STL_MAXBANKS]; + struct stlpanel *panels[STL_MAXPANELS]; +}; /* -- cgit v1.2.3 From be90038a24c814dc98bc5a813f41855779000018 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 8 Dec 2006 02:38:43 -0800 Subject: [PATCH] tty: preparatory structures for termios revamp In order to sort out our struct termios and add proper speed control we need to separate the kernel and user termios structures. Glibc is fine but the other libraries rely on the kernel exported struct termios and we need to extend this without breaking the ABI/API To do so we add a struct ktermios which is the kernel view of a termios structure and overlaps the struct termios with extra fields on the end for now. (That limitation will go away in later patches). Some platforms (eg alpha) planned ahead and thus use the same struct for both, others did not. This just adds the structures but does not use them, it seems a sensible splitting point for bisect if there are compile failures (not that I expect them) Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-alpha/termbits.h | 13 +++++++++++++ include/asm-arm/termbits.h | 12 ++++++++++++ include/asm-arm26/termbits.h | 12 ++++++++++++ include/asm-avr32/termbits.h | 11 +++++++++++ include/asm-cris/termbits.h | 11 +++++++++++ include/asm-frv/termbits.h | 11 +++++++++++ include/asm-h8300/termbits.h | 11 +++++++++++ include/asm-i386/termbits.h | 11 +++++++++++ include/asm-ia64/termbits.h | 11 +++++++++++ include/asm-m32r/termbits.h | 11 +++++++++++ include/asm-m68k/termbits.h | 11 +++++++++++ include/asm-mips/termbits.h | 11 +++++++++++ include/asm-parisc/termbits.h | 11 +++++++++++ include/asm-powerpc/termbits.h | 13 +++++++++++++ include/asm-s390/termbits.h | 11 +++++++++++ include/asm-sh/termbits.h | 11 +++++++++++ include/asm-sparc/termbits.h | 12 ++++++++++++ include/asm-sparc64/termbits.h | 12 ++++++++++++ include/asm-v850/termbits.h | 11 +++++++++++ include/asm-x86_64/termbits.h | 11 +++++++++++ 20 files changed, 228 insertions(+) (limited to 'include') diff --git a/include/asm-alpha/termbits.h b/include/asm-alpha/termbits.h index 5541101b58a..ad854a4a3af 100644 --- a/include/asm-alpha/termbits.h +++ b/include/asm-alpha/termbits.h @@ -25,6 +25,19 @@ struct termios { speed_t c_ospeed; /* output speed */ }; +/* Alpha has matching termios and ktermios */ + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VEOF 0 #define VEOL 1 diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h index bbc6e1d24d3..a3f4fe1742d 100644 --- a/include/asm-arm/termbits.h +++ b/include/asm-arm/termbits.h @@ -15,6 +15,18 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-arm26/termbits.h b/include/asm-arm26/termbits.h index bbc6e1d24d3..a3f4fe1742d 100644 --- a/include/asm-arm26/termbits.h +++ b/include/asm-arm26/termbits.h @@ -15,6 +15,18 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-avr32/termbits.h b/include/asm-avr32/termbits.h index 9dc6eacafa3..c215fafdae4 100644 --- a/include/asm-avr32/termbits.h +++ b/include/asm-avr32/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-cris/termbits.h b/include/asm-cris/termbits.h index be0836d2f28..8d8cec225fe 100644 --- a/include/asm-cris/termbits.h +++ b/include/asm-cris/termbits.h @@ -19,6 +19,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-frv/termbits.h b/include/asm-frv/termbits.h index 74f20d6e292..2d6d389cff4 100644 --- a/include/asm-frv/termbits.h +++ b/include/asm-frv/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-h8300/termbits.h b/include/asm-h8300/termbits.h index fa69ae00eda..6a1f4d3807b 100644 --- a/include/asm-h8300/termbits.h +++ b/include/asm-h8300/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-i386/termbits.h b/include/asm-i386/termbits.h index 72c10e3190f..12baf1d6343 100644 --- a/include/asm-i386/termbits.h +++ b/include/asm-i386/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-ia64/termbits.h b/include/asm-ia64/termbits.h index b9e843f7dc4..4531a511bde 100644 --- a/include/asm-ia64/termbits.h +++ b/include/asm-ia64/termbits.h @@ -26,6 +26,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-m32r/termbits.h b/include/asm-m32r/termbits.h index 5ace3702df7..faf2bd0504c 100644 --- a/include/asm-m32r/termbits.h +++ b/include/asm-m32r/termbits.h @@ -19,6 +19,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-m68k/termbits.h b/include/asm-m68k/termbits.h index e9eec3eb071..a194092240f 100644 --- a/include/asm-m68k/termbits.h +++ b/include/asm-m68k/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-mips/termbits.h b/include/asm-mips/termbits.h index b62ec7c521c..0bbe07b42a0 100644 --- a/include/asm-mips/termbits.h +++ b/include/asm-mips/termbits.h @@ -30,6 +30,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 /* Interrupt character [ISIG]. */ #define VQUIT 1 /* Quit character [ISIG]. */ diff --git a/include/asm-parisc/termbits.h b/include/asm-parisc/termbits.h index 372b634892c..a46e299a939 100644 --- a/include/asm-parisc/termbits.h +++ b/include/asm-parisc/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h index 6d533b07aaf..b572f21b32c 100644 --- a/include/asm-powerpc/termbits.h +++ b/include/asm-powerpc/termbits.h @@ -30,6 +30,19 @@ struct termios { speed_t c_ospeed; /* output speed */ }; +/* For PowerPC the termios and ktermios are the same */ + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-s390/termbits.h b/include/asm-s390/termbits.h index eb3f8bfabf6..585c78a6e40 100644 --- a/include/asm-s390/termbits.h +++ b/include/asm-s390/termbits.h @@ -25,6 +25,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-sh/termbits.h b/include/asm-sh/termbits.h index 4f9822a8e7b..f1b7b46f4e9 100644 --- a/include/asm-sh/termbits.h +++ b/include/asm-sh/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-sparc/termbits.h b/include/asm-sparc/termbits.h index 1794d71134b..5eb00a105d7 100644 --- a/include/asm-sparc/termbits.h +++ b/include/asm-sparc/termbits.h @@ -31,6 +31,18 @@ struct termios { #endif }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-sparc64/termbits.h b/include/asm-sparc64/termbits.h index b07715273ed..705cd44b417 100644 --- a/include/asm-sparc64/termbits.h +++ b/include/asm-sparc64/termbits.h @@ -33,6 +33,18 @@ struct termios { #endif }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h index 212d4e27926..f3b43303208 100644 --- a/include/asm-v850/termbits.h +++ b/include/asm-v850/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 diff --git a/include/asm-x86_64/termbits.h b/include/asm-x86_64/termbits.h index bd950946e52..f31918cea51 100644 --- a/include/asm-x86_64/termbits.h +++ b/include/asm-x86_64/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 #define VQUIT 1 -- cgit v1.2.3 From edc6afc5496875a640bef0913604be7550c1795d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 8 Dec 2006 02:38:44 -0800 Subject: [PATCH] tty: switch to ktermios and new framework This is the core of the switch to the new framework. I've split it from the driver patches which are mostly search/replace and would encourage people to give this one a good hard stare. The references to BOTHER and ISHIFT are the termios values that must be defined by a platform once it wants to turn on "new style" ioctl support. The code patches here ensure that providing 1. The termios overlays the ktermios in memory 2. The only new kernel only fields are c_ispeed/c_ospeed (or none) the existing behaviour is retained. This is true for the patches at this point in time. Future patches will define BOTHER, ISHIFT and enable newer termios structures for each architecture, and once they are all done some of the ifdefs also vanish. [akpm@osdl.org: warning fix] [akpm@osdl.org: IRDA fix] Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/tty.h | 9 +++++---- include/linux/tty_driver.h | 12 ++++++------ include/linux/tty_ldisc.h | 4 ++-- include/net/irda/ircomm_tty.h | 2 +- 4 files changed, 14 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/linux/tty.h b/include/linux/tty.h index 1d29999a343..65cbcf22c31 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -175,7 +175,7 @@ struct tty_struct { int index; struct tty_ldisc ldisc; struct mutex termios_mutex; - struct termios *termios, *termios_locked; + struct ktermios *termios, *termios_locked; char name[64]; int pgrp; int session; @@ -258,7 +258,7 @@ struct tty_struct { extern void tty_write_flush(struct tty_struct *); -extern struct termios tty_std_termios; +extern struct ktermios tty_std_termios; extern int kmsg_redirect; @@ -293,8 +293,9 @@ extern int tty_hung_up_p(struct file * filp); extern void do_SAK(struct tty_struct *tty); extern void disassociate_ctty(int priv); extern void tty_flip_buffer_push(struct tty_struct *tty); -extern int tty_get_baud_rate(struct tty_struct *tty); -extern int tty_termios_baud_rate(struct termios *termios); +extern speed_t tty_get_baud_rate(struct tty_struct *tty); +extern speed_t tty_termios_baud_rate(struct ktermios *termios); +extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 5c8473bb688..659487e3ebe 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -53,7 +53,7 @@ * device-specific ioctl's. If the ioctl number passed in cmd * is not recognized by the driver, it should return ENOIOCTLCMD. * - * void (*set_termios)(struct tty_struct *tty, struct termios * old); + * void (*set_termios)(struct tty_struct *tty, struct ktermios * old); * * This routine allows the tty driver to be notified when * device's termios settings have changed. Note that a @@ -132,7 +132,7 @@ struct tty_operations { int (*chars_in_buffer)(struct tty_struct *tty); int (*ioctl)(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, struct termios * old); + void (*set_termios)(struct tty_struct *tty, struct ktermios * old); void (*throttle)(struct tty_struct * tty); void (*unthrottle)(struct tty_struct * tty); void (*stop)(struct tty_struct *tty); @@ -165,7 +165,7 @@ struct tty_driver { int num; /* number of devices allocated */ short type; /* type of tty driver */ short subtype; /* subtype of tty driver */ - struct termios init_termios; /* Initial termios */ + struct ktermios init_termios; /* Initial termios */ int flags; /* tty driver flags */ int refcount; /* for loadable tty drivers */ struct proc_dir_entry *proc_entry; /* /proc fs entry */ @@ -175,8 +175,8 @@ struct tty_driver { * Pointer to the tty data structures */ struct tty_struct **ttys; - struct termios **termios; - struct termios **termios_locked; + struct ktermios **termios; + struct ktermios **termios_locked; void *driver_state; /* only used for the PTY driver */ /* @@ -193,7 +193,7 @@ struct tty_driver { int (*chars_in_buffer)(struct tty_struct *tty); int (*ioctl)(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, struct termios * old); + void (*set_termios)(struct tty_struct *tty, struct ktermios * old); void (*throttle)(struct tty_struct * tty); void (*unthrottle)(struct tty_struct * tty); void (*stop)(struct tty_struct *tty); diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 83c6e6c10eb..d75932e2771 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -59,7 +59,7 @@ * low-level driver can "grab" an ioctl request before the line * discpline has a chance to see it. * - * void (*set_termios)(struct tty_struct *tty, struct termios * old); + * void (*set_termios)(struct tty_struct *tty, struct ktermios * old); * * This function notifies the line discpline that a change has * been made to the termios structure. @@ -118,7 +118,7 @@ struct tty_ldisc { const unsigned char * buf, size_t nr); int (*ioctl)(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, struct termios * old); + void (*set_termios)(struct tty_struct *tty, struct ktermios * old); unsigned int (*poll)(struct tty_struct *, struct file *, struct poll_table_struct *); int (*hangup)(struct tty_struct *tty); diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h index 87699cb4ef8..8dabdd603fe 100644 --- a/include/net/irda/ircomm_tty.h +++ b/include/net/irda/ircomm_tty.h @@ -126,7 +126,7 @@ extern int ircomm_tty_tiocmset(struct tty_struct *tty, struct file *file, extern int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); extern void ircomm_tty_set_termios(struct tty_struct *tty, - struct termios *old_termios); + struct ktermios *old_termios); extern hashbin_t *ircomm_tty; #endif -- cgit v1.2.3 From 606d099cdd1080bbb50ea50dc52d98252f8f10a1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 8 Dec 2006 02:38:45 -0800 Subject: [PATCH] tty: switch to ktermios This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox Signed-off-by: Martin Peschke Acked-by: Peter Oberparleiter Cc: Cornelia Huck Signed-off-by: Hugh Dickins Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/termios.h | 4 ++-- include/asm-powerpc/termbits.h | 2 +- include/linux/generic_serial.h | 2 +- include/linux/isdn.h | 8 ++++---- include/linux/serial_core.h | 8 ++++---- include/linux/usb/serial.h | 2 +- 6 files changed, 13 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h index 1e58ca39592..3769e6bd63b 100644 --- a/include/asm-generic/termios.h +++ b/include/asm-generic/termios.h @@ -11,7 +11,7 @@ /* * Translate a "termio" structure into a "termios". Ugh. */ -static inline int user_termio_to_kernel_termios(struct termios *termios, +static inline int user_termio_to_kernel_termios(struct ktermios *termios, struct termio __user *termio) { unsigned short tmp; @@ -48,7 +48,7 @@ static inline int user_termio_to_kernel_termios(struct termios *termios, * Translate a "termios" structure into a "termio". Ugh. */ static inline int kernel_termios_to_user_termio(struct termio __user *termio, - struct termios *termios) + struct ktermios *termios) { if (put_user(termios->c_iflag, &termio->c_iflag) < 0 || put_user(termios->c_oflag, &termio->c_oflag) < 0 || diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h index b572f21b32c..5e79198f7d1 100644 --- a/include/asm-powerpc/termbits.h +++ b/include/asm-powerpc/termbits.h @@ -37,8 +37,8 @@ struct ktermios { tcflag_t c_oflag; /* output mode flags */ tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ speed_t c_ispeed; /* input speed */ speed_t c_ospeed; /* output speed */ }; diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h index e2538456195..5412da28fa4 100644 --- a/include/linux/generic_serial.h +++ b/include/linux/generic_serial.h @@ -91,7 +91,7 @@ void gs_hangup(struct tty_struct *tty); int gs_block_til_ready(void *port, struct file *filp); void gs_close(struct tty_struct *tty, struct file *filp); void gs_set_termios (struct tty_struct * tty, - struct termios * old_termios); + struct ktermios * old_termios); int gs_init_port(struct gs_port *port); int gs_setserial(struct gs_port *port, struct serial_struct __user *sp); int gs_getserial(struct gs_port *port, struct serial_struct __user *sp); diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 62991148d5a..3c7875b7ab5 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -511,8 +511,8 @@ typedef struct modem_info { #endif struct tty_struct *tty; /* Pointer to corresponding tty */ atemu emu; /* AT-emulator data */ - struct termios normal_termios; /* For saving termios structs */ - struct termios callout_termios; + struct ktermios normal_termios; /* For saving termios structs */ + struct ktermios callout_termios; wait_queue_head_t open_wait, close_wait; struct semaphore write_sem; spinlock_t readlock; @@ -525,8 +525,8 @@ typedef struct _isdn_modem { int refcount; /* Number of opens */ struct tty_driver *tty_modem; /* tty-device */ struct tty_struct *modem_table[ISDN_MAX_CHANNELS]; /* ?? copied from Orig */ - struct termios *modem_termios[ISDN_MAX_CHANNELS]; - struct termios *modem_termios_locked[ISDN_MAX_CHANNELS]; + struct ktermios *modem_termios[ISDN_MAX_CHANNELS]; + struct ktermios *modem_termios_locked[ISDN_MAX_CHANNELS]; modem_info info[ISDN_MAX_CHANNELS]; /* Private data */ } isdn_modem_t; diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 82767213664..cf23813cbec 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -166,8 +166,8 @@ struct uart_ops { void (*break_ctl)(struct uart_port *, int ctl); int (*startup)(struct uart_port *); void (*shutdown)(struct uart_port *); - void (*set_termios)(struct uart_port *, struct termios *new, - struct termios *old); + void (*set_termios)(struct uart_port *, struct ktermios *new, + struct ktermios *old); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); int (*set_wake)(struct uart_port *, unsigned int state); @@ -361,8 +361,8 @@ void uart_write_wakeup(struct uart_port *port); */ void uart_update_timeout(struct uart_port *port, unsigned int cflag, unsigned int baud); -unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios, - struct termios *old, unsigned int min, +unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, + struct ktermios *old, unsigned int min, unsigned int max); unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 91b3ea2bbb1..10f99e5f1a9 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -218,7 +218,7 @@ struct usb_serial_driver { int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count); int (*write_room) (struct usb_serial_port *port); int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); - void (*set_termios) (struct usb_serial_port *port, struct termios * old); + void (*set_termios) (struct usb_serial_port *port, struct ktermios * old); void (*break_ctl) (struct usb_serial_port *port, int break_state); int (*chars_in_buffer) (struct usb_serial_port *port); void (*throttle) (struct usb_serial_port *port); -- cgit v1.2.3 From 592ee3a5e5e2a981ef2829a0380093006d045661 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 8 Dec 2006 02:38:48 -0800 Subject: [PATCH] termios: Enable new style termios ioctls on x86-64 This turns on the split input/output speed features and arbitary baud rate handling for the x86-64 platform. Nothing should break if you use existing standard speeds. If you use the new speed stuff then you may see some drivers failing to report the speed changes properly in error cases. This will be worked on further. For the working cases this all seems happy. I'll post a test suite used to test the basic stuff as well. Patches for i386 will follow when I get a moment but are basically the same. If people could patch/test-suite other architectures and submit them that would be great. Signed-off-by: Alan Cox Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-x86_64/ioctls.h | 4 ++++ include/asm-x86_64/termbits.h | 16 +++++++++++++++- include/asm-x86_64/termios.h | 6 ++++-- 3 files changed, 23 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-x86_64/ioctls.h b/include/asm-x86_64/ioctls.h index 62caf8b6e4e..3fc0b15a0d7 100644 --- a/include/asm-x86_64/ioctls.h +++ b/include/asm-x86_64/ioctls.h @@ -46,6 +46,10 @@ #define TIOCSBRK 0x5427 /* BSD compatibility */ #define TIOCCBRK 0x5428 /* BSD compatibility */ #define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ diff --git a/include/asm-x86_64/termbits.h b/include/asm-x86_64/termbits.h index f31918cea51..6cfc3bb10c1 100644 --- a/include/asm-x86_64/termbits.h +++ b/include/asm-x86_64/termbits.h @@ -17,6 +17,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + struct ktermios { tcflag_t c_iflag; /* input mode flags */ tcflag_t c_oflag; /* output mode flags */ @@ -129,6 +140,7 @@ struct ktermios { #define HUPCL 0002000 #define CLOCAL 0004000 #define CBAUDEX 0010000 +#define BOTHER 0010000 /* non standard rate */ #define B57600 0010001 #define B115200 0010002 #define B230400 0010003 @@ -144,10 +156,12 @@ struct ktermios { #define B3000000 0010015 #define B3500000 0010016 #define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CIBAUD 002003600000 /* input baud rate */ #define CMSPAR 010000000000 /* mark or space (stick) parity */ #define CRTSCTS 020000000000 /* flow control */ +#define IBSHIFT 8 /* Shift from CBAUD to CIBAUD */ + /* c_lflag bits */ #define ISIG 0000001 #define ICANON 0000002 diff --git a/include/asm-x86_64/termios.h b/include/asm-x86_64/termios.h index 041a91f7ddf..443b225537f 100644 --- a/include/asm-x86_64/termios.h +++ b/include/asm-x86_64/termios.h @@ -98,8 +98,10 @@ struct termio { copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ }) -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) #endif /* __KERNEL__ */ -- cgit v1.2.3 From 6b2c9457bb377bf843f0a3ca2f4eb2ef69c67985 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:39:15 -0800 Subject: [PATCH] Char: stallion, variables cleanup - fix `gcc -W' un/signed warnings by converting some ints -> uints. - move 3 global variables into functions, where are they used. Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/stallion.h | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/linux/stallion.h b/include/linux/stallion.h index ef5270b83d0..4a0a329beaf 100644 --- a/include/linux/stallion.h +++ b/include/linux/stallion.h @@ -69,12 +69,12 @@ struct stlrq { */ struct stlport { unsigned long magic; - int portnr; - int panelnr; - int brdnr; + unsigned int portnr; + unsigned int panelnr; + unsigned int brdnr; int ioaddr; int uartaddr; - int pagenr; + unsigned int pagenr; long istate; int flags; int baud_base; @@ -102,10 +102,10 @@ struct stlport { struct stlpanel { unsigned long magic; - int panelnr; - int brdnr; - int pagenr; - int nrports; + unsigned int panelnr; + unsigned int brdnr; + unsigned int pagenr; + unsigned int nrports; int iobase; void *uartp; void (*isr)(struct stlpanel *panelp, unsigned int iobase); @@ -116,12 +116,12 @@ struct stlpanel { struct stlbrd { unsigned long magic; - int brdnr; - int brdtype; - int state; - int nrpanels; - int nrports; - int nrbnks; + unsigned int brdnr; + unsigned int brdtype; + unsigned int state; + unsigned int nrpanels; + unsigned int nrports; + unsigned int nrbnks; int irq; int irqtype; int (*isr)(struct stlbrd *brdp); -- cgit v1.2.3 From 1f8ec435e3516eb831bb98110cc2b2b28057154b Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:39:18 -0800 Subject: [PATCH] Char: istallion, eliminate typedefs Use only struct instead of defining a new type . Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/istallion.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/istallion.h b/include/linux/istallion.h index b55e2a03560..af2c32d16d4 100644 --- a/include/linux/istallion.h +++ b/include/linux/istallion.h @@ -49,7 +49,7 @@ * communication with the slave board will always be on a per port * basis. */ -typedef struct { +struct stliport { unsigned long magic; int portnr; int panelnr; @@ -72,7 +72,7 @@ typedef struct { wait_queue_head_t close_wait; wait_queue_head_t raw_wait; struct work_struct tqhangup; - asysigs_t asig; + struct asysigs asig; unsigned long addr; unsigned long rxoffset; unsigned long txoffset; @@ -83,13 +83,13 @@ typedef struct { unsigned char reqbit; unsigned char portidx; unsigned char portbit; -} stliport_t; +}; /* * Use a structure of function pointers to do board level operations. * These include, enable/disable, paging shared memory, interrupting, etc. */ -typedef struct stlibrd { +struct stlibrd { unsigned long magic; int brdnr; int brdtype; @@ -116,8 +116,8 @@ typedef struct stlibrd { void __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line); void (*intr)(struct stlibrd *brdp); void (*reset)(struct stlibrd *brdp); - stliport_t *ports[STL_MAXPORTS]; -} stlibrd_t; + struct stliport *ports[STL_MAXPORTS]; +}; /* -- cgit v1.2.3 From 1328d737f510e9933a621f66aa8de81c02b647a7 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:39:19 -0800 Subject: [PATCH] Char: istallion, variables cleanup - wipe gcc -W warnings by int -> uint conversion - move 2 global variables into their local place Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/istallion.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/linux/istallion.h b/include/linux/istallion.h index af2c32d16d4..106a5e85e5c 100644 --- a/include/linux/istallion.h +++ b/include/linux/istallion.h @@ -51,11 +51,11 @@ */ struct stliport { unsigned long magic; - int portnr; - int panelnr; - int brdnr; + unsigned int portnr; + unsigned int panelnr; + unsigned int brdnr; unsigned long state; - int devnr; + unsigned int devnr; int flags; int baud_base; int custom_divisor; @@ -91,23 +91,23 @@ struct stliport { */ struct stlibrd { unsigned long magic; - int brdnr; - int brdtype; - int state; - int nrpanels; - int nrports; - int nrdevs; + unsigned int brdnr; + unsigned int brdtype; + unsigned int state; + unsigned int nrpanels; + unsigned int nrports; + unsigned int nrdevs; unsigned int iobase; int iosize; unsigned long memaddr; void __iomem *membase; - int memsize; + unsigned long memsize; int pagesize; int hostoffset; int slaveoffset; int bitsize; int enabval; - int panels[STL_MAXPANELS]; + unsigned int panels[STL_MAXPANELS]; int panelids[STL_MAXPANELS]; void (*init)(struct stlibrd *brdp); void (*enable)(struct stlibrd *brdp); -- cgit v1.2.3 From 6ff1cb355e628f8fc55fa2d01e269e5e1bbc2fe9 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 8 Dec 2006 02:39:43 -0800 Subject: [PATCH] fault-injection capabilities infrastructure This patch provides base functions implement to fault-injection capabilities. - The function should_fail() is taken from failmalloc-1.0 (http://www.nongnu.org/failmalloc/) [akpm@osdl.org: cleanups, comments, add __init] Cc: Signed-off-by: Akinobu Mita Signed-off-by: Don Mullis Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fault-inject.h | 69 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 include/linux/fault-inject.h (limited to 'include') diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h new file mode 100644 index 00000000000..4df4902bc8d --- /dev/null +++ b/include/linux/fault-inject.h @@ -0,0 +1,69 @@ +#ifndef _LINUX_FAULT_INJECT_H +#define _LINUX_FAULT_INJECT_H + +#ifdef CONFIG_FAULT_INJECTION + +#include +#include +#include + +/* + * For explanation of the elements of this struct, see + * Documentation/fault-injection/fault-injection.txt + */ +struct fault_attr { + unsigned long probability; + unsigned long interval; + atomic_t times; + atomic_t space; + unsigned long verbose; + + unsigned long count; + +#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS + + struct { + struct dentry *dir; + + struct dentry *probability_file; + struct dentry *interval_file; + struct dentry *times_file; + struct dentry *space_file; + struct dentry *verbose_file; + } dentries; + +#endif +}; + +#define FAULT_ATTR_INITIALIZER { \ + .interval = 1, \ + .times = ATOMIC_INIT(1), \ + } + +#define DECLARE_FAULT_ATTR(name) struct fault_attr name = FAULT_ATTR_INITIALIZER +int setup_fault_attr(struct fault_attr *attr, char *str); +void should_fail_srandom(unsigned long entropy); +int should_fail(struct fault_attr *attr, ssize_t size); + +#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS + +int init_fault_attr_dentries(struct fault_attr *attr, const char *name); +void cleanup_fault_attr_dentries(struct fault_attr *attr); + +#else /* CONFIG_FAULT_INJECTION_DEBUG_FS */ + +static inline int init_fault_attr_dentries(struct fault_attr *attr, + const char *name) +{ + return -ENODEV; +} + +static inline void cleanup_fault_attr_dentries(struct fault_attr *attr) +{ +} + +#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */ + +#endif /* CONFIG_FAULT_INJECTION */ + +#endif /* _LINUX_FAULT_INJECT_H */ -- cgit v1.2.3 From c17bb4951752d3e0f49cd1ea9d2e868422f9e0d6 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 8 Dec 2006 02:39:46 -0800 Subject: [PATCH] fault-injection capability for disk IO This patch provides fault-injection capability for disk IO. Boot option: fail_make_request=,,, -- specifies the interval of failures. -- specifies how often it should fail in percent. -- specifies the size of free space where disk IO can be issued safely in bytes. -- specifies how many times failures may happen at most. Debugfs: /debug/fail_make_request/interval /debug/fail_make_request/probability /debug/fail_make_request/specifies /debug/fail_make_request/times Example: fail_make_request=10,100,0,-1 echo 1 > /sys/blocks/hda/hda1/make-it-fail generic_make_request() on /dev/hda1 fails once per 10 times. Cc: Jens Axboe Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/genhd.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 41f276fdd18..0a022b2f63f 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -83,6 +83,9 @@ struct hd_struct { struct kobject *holder_dir; unsigned ios[2], sectors[2]; /* READs and WRITEs */ int policy, partno; +#ifdef CONFIG_FAIL_MAKE_REQUEST + int make_it_fail; +#endif }; #define GENHD_FL_REMOVABLE 1 @@ -90,6 +93,7 @@ struct hd_struct { #define GENHD_FL_CD 8 #define GENHD_FL_UP 16 #define GENHD_FL_SUPPRESS_PARTITION_INFO 32 +#define GENHD_FL_FAIL 64 struct disk_stats { unsigned long sectors[2]; /* READs and WRITEs */ -- cgit v1.2.3 From f4f154fd920b2178382a6a24a236348e4429ebc1 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 8 Dec 2006 02:39:47 -0800 Subject: [PATCH] fault injection: process filtering for fault-injection capabilities This patch provides process filtering feature. The process filter allows failing only permitted processes by /proc//make-it-fail Please see the example that demostrates how to inject slab allocation failures into module init/cleanup code in Documentation/fault-injection/fault-injection.txt Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fault-inject.h | 2 ++ include/linux/sched.h | 3 +++ 2 files changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h index 4df4902bc8d..a525f9b9f01 100644 --- a/include/linux/fault-inject.h +++ b/include/linux/fault-inject.h @@ -17,6 +17,7 @@ struct fault_attr { atomic_t times; atomic_t space; unsigned long verbose; + u32 task_filter; unsigned long count; @@ -30,6 +31,7 @@ struct fault_attr { struct dentry *times_file; struct dentry *space_file; struct dentry *verbose_file; + struct dentry *task_filter_file; } dentries; #endif diff --git a/include/linux/sched.h b/include/linux/sched.h index f0317edea14..ad9c46071ff 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1045,6 +1045,9 @@ struct task_struct { #ifdef CONFIG_TASK_DELAY_ACCT struct task_delay_info *delays; #endif +#ifdef CONFIG_FAULT_INJECTION + int make_it_fail; +#endif }; static inline pid_t process_group(struct task_struct *tsk) -- cgit v1.2.3 From 329409aeda064c4aff00c51f837fcd3bbdaeeba6 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 8 Dec 2006 02:39:48 -0800 Subject: [PATCH] fault injection: stacktrace filtering This patch provides stacktrace filtering feature. The stacktrace filter allows failing only for the caller you are interested in. For example someone may want to inject kmalloc() failures into only e100 module. they want to inject not only direct kmalloc() call, but also indirect allocation, too. - e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone --> kmem_cache_alloc This patch enables to detect function calls like this by stacktrace and inject failures. The script Documentaion/fault-injection/failmodule.sh helps it. The range of text section of loaded e100 is expected to be [/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text) So failmodule.sh stores these values into /debug/failslab/address-start and /debug/failslab/address-end. The maximum stacktrace depth is specified by /debug/failslab/stacktrace-depth. Please see the example that demonstrates how to inject slab allocation failures only for a specific module in Documentation/fault-injection/fault-injection.txt [dwm@meer.net: reject failure if any caller lies within specified range] Signed-off-by: Akinobu Mita Signed-off-by: Don Mullis Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fault-inject.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h index a525f9b9f01..9bb584e8939 100644 --- a/include/linux/fault-inject.h +++ b/include/linux/fault-inject.h @@ -18,6 +18,11 @@ struct fault_attr { atomic_t space; unsigned long verbose; u32 task_filter; + unsigned long stacktrace_depth; + unsigned long require_start; + unsigned long require_end; + unsigned long reject_start; + unsigned long reject_end; unsigned long count; @@ -32,6 +37,11 @@ struct fault_attr { struct dentry *space_file; struct dentry *verbose_file; struct dentry *task_filter_file; + struct dentry *stacktrace_depth_file; + struct dentry *require_start_file; + struct dentry *require_end_file; + struct dentry *reject_start_file; + struct dentry *reject_end_file; } dentries; #endif @@ -40,6 +50,8 @@ struct fault_attr { #define FAULT_ATTR_INITIALIZER { \ .interval = 1, \ .times = ATOMIC_INIT(1), \ + .require_end = ULONG_MAX, \ + .stacktrace_depth = 32, \ } #define DECLARE_FAULT_ATTR(name) struct fault_attr name = FAULT_ATTR_INITIALIZER -- cgit v1.2.3 From 08b3df2d16cbebf7d72c09dcbc071696c14d07e3 Mon Sep 17 00:00:00 2001 From: Don Mullis Date: Fri, 8 Dec 2006 02:39:51 -0800 Subject: [PATCH] fault-injection: Use bool-true-false throughout Use bool-true-false throughout. Signed-off-by: Don Mullis Cc: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fault-inject.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h index 9bb584e8939..c77067916b7 100644 --- a/include/linux/fault-inject.h +++ b/include/linux/fault-inject.h @@ -57,7 +57,7 @@ struct fault_attr { #define DECLARE_FAULT_ATTR(name) struct fault_attr name = FAULT_ATTR_INITIALIZER int setup_fault_attr(struct fault_attr *attr, char *str); void should_fail_srandom(unsigned long entropy); -int should_fail(struct fault_attr *attr, ssize_t size); +bool should_fail(struct fault_attr *attr, ssize_t size); #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS -- cgit v1.2.3 From 6b1b60f41eef3ba7b188fd72f1d6de478aafd93c Mon Sep 17 00:00:00 2001 From: Don Mullis Date: Fri, 8 Dec 2006 02:39:53 -0800 Subject: [PATCH] fault-injection: defaults likely to please a new user Assign defaults most likely to please a new user: 1) generate some logging output (verbose=2) 2) avoid injecting failures likely to lock up UI (ignore_gfp_wait=1, ignore_gfp_highmem=1) Signed-off-by: Don Mullis Cc: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fault-inject.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h index c77067916b7..32368c4f032 100644 --- a/include/linux/fault-inject.h +++ b/include/linux/fault-inject.h @@ -52,6 +52,7 @@ struct fault_attr { .times = ATOMIC_INIT(1), \ .require_end = ULONG_MAX, \ .stacktrace_depth = 32, \ + .verbose = 2, \ } #define DECLARE_FAULT_ATTR(name) struct fault_attr name = FAULT_ATTR_INITIALIZER -- cgit v1.2.3 From b1489009963b8c5132f2ffe23483e811d9ae5607 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 8 Dec 2006 02:39:58 -0800 Subject: [PATCH] ide: more conversion to pci_get APIs This completes IDE except for one use which requires a new core PCI function and will be polished up at the end Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/ide.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-i386/ide.h b/include/asm-i386/ide.h index 73465d2892b..0fc240c80f4 100644 --- a/include/asm-i386/ide.h +++ b/include/asm-i386/ide.h @@ -40,13 +40,14 @@ static __inline__ int ide_default_irq(unsigned long base) static __inline__ unsigned long ide_default_io_base(int index) { + struct pci_dev *pdev; /* * If PCI is present then it is not safe to poke around * the other legacy IDE ports. Only 0x1f0 and 0x170 are * defined compatibility mode ports for PCI. A user can * override this using ide= but we must default safe. */ - if (pci_find_device(PCI_ANY_ID, PCI_ANY_ID, NULL) == NULL) { + if ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL)) == NULL) { switch(index) { case 2: return 0x1e8; case 3: return 0x168; @@ -54,6 +55,7 @@ static __inline__ unsigned long ide_default_io_base(int index) case 5: return 0x160; } } + pci_dev_put(pdev); switch (index) { case 0: return 0x1f0; case 1: return 0x170; -- cgit v1.2.3 From 357b819dda03e642f9c2d737596ad6cdc0022c00 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp" Date: Fri, 8 Dec 2006 02:40:23 -0800 Subject: [PATCH] s3c2410fb: Add support for STN displays This patch adds support for stn displays on the s3c2410 arm SoC. The LCD type is choosen by a new field in the s3c2410fb_mach_info structure and its value is the value of the PNRMODE bits. This worth to be noted as a value of 0 means that you configure a 4 bit dual scan stn display. Signed-off-by: Arnaud Patard Cc: "Antonino A. Daplas" Cc: Russell King Cc: Ben Dooks Acked-by: James Simmons Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/arch-s3c2410/fb.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h index 90894214cac..93a58e7862b 100644 --- a/include/asm-arm/arch-s3c2410/fb.h +++ b/include/asm-arm/arch-s3c2410/fb.h @@ -31,6 +31,9 @@ struct s3c2410fb_hw { struct s3c2410fb_mach_info { unsigned char fixed_syncs; /* do not update sync/border */ + /* LCD types */ + int type; + /* Screen size */ int width; int height; -- cgit v1.2.3 From adf6b206546414fd006098d027e81f2b576ea2aa Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 8 Dec 2006 02:40:27 -0800 Subject: [PATCH] fbcmap.c: mark structs const or __read_mostly - Mark the default colormaps read-only, as nobody should be allowed to modify them - Additionally mark color values as __read_mostly since they will only be modified (very seldom) by fb_invert_cmaps() - Add named C99-initializers in fb_cmap structs and use the ARRAY_SIZE() macro Signed-off-by: Helge Deller Acked-by: James Simmons Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fb.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/fb.h b/include/linux/fb.h index fa23e0671bb..6fe56aaa668 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -970,11 +970,11 @@ extern struct fb_videomode *fb_find_best_display(struct fb_monspecs *specs, /* drivers/video/fbcmap.c */ extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp); extern void fb_dealloc_cmap(struct fb_cmap *cmap); -extern int fb_copy_cmap(struct fb_cmap *from, struct fb_cmap *to); -extern int fb_cmap_to_user(struct fb_cmap *from, struct fb_cmap_user *to); +extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to); +extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to); extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info); extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info); -extern struct fb_cmap *fb_default_cmap(int len); +extern const struct fb_cmap *fb_default_cmap(int len); extern void fb_invert_cmaps(void); struct fb_videomode { -- cgit v1.2.3 From ea465250d41c99b4ee7dac1e6eb87b7106f7b11e Mon Sep 17 00:00:00 2001 From: Raphael Assenat Date: Fri, 8 Dec 2006 02:40:36 -0800 Subject: [PATCH] mbxfb: Add YUV video overlay support This patch adds a way to create and use the video plane (YUV overlay) and scaling video scaling features of the chip. The overlay is configured, resized and modified using a device specific ioctl. Also included in this patch: - If no platform data was passed, print an error and exit instead of crashing. - Added a write_reg(_dly) macro. This improves readability when manipulating chip registers. (no more udelay() after each write). - Comments about some issues. Signed-off-by: Raphael Assenat Cc: "Antonino A. Daplas" Acked-by: James Simmons Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/video/mbxfb.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include') diff --git a/include/video/mbxfb.h b/include/video/mbxfb.h index 3bde0f5cd55..20b9002712e 100644 --- a/include/video/mbxfb.h +++ b/include/video/mbxfb.h @@ -1,6 +1,9 @@ #ifndef __MBX_FB_H #define __MBX_FB_H +#include +#include + struct mbxfb_val { unsigned int defval; unsigned int min; @@ -25,4 +28,32 @@ struct mbxfb_platform_data { int (*remove)(struct fb_info *fb); }; +/* planar */ +#define MBXFB_FMT_YUV12 0 + +/* packed */ +#define MBXFB_FMT_UY0VY1 1 +#define MBXFB_FMT_VY0UY1 2 +#define MBXFB_FMT_Y0UY1V 3 +#define MBXFB_FMT_Y0VY1U 4 +struct mbxfb_overlaySetup { + __u32 enable; + __u32 x, y; + __u32 width, height; + __u32 alpha; + __u32 fmt; + __u32 mem_offset; + __u32 scaled_width; + __u32 scaled_height; + + /* Filled by the driver */ + __u32 U_offset; + __u32 V_offset; + + __u16 Y_stride; + __u16 UV_stride; +}; + +#define MBXFB_IOCX_OVERLAY _IOWR(0xF4, 0x00,struct mbxfb_overlaySetup) + #endif /* __MBX_FB_H */ -- cgit v1.2.3 From f4b85dc0a1a6a6af9e67b7993fc833051222f40b Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Fri, 8 Dec 2006 02:41:00 -0800 Subject: [PATCH] video: pm3fb macros fix Signed-off-by: Mariusz Kozlowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/video/pm3fb.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/video/pm3fb.h b/include/video/pm3fb.h index ac021379ac4..94c7d2da90e 100644 --- a/include/video/pm3fb.h +++ b/include/video/pm3fb.h @@ -607,16 +607,16 @@ #define PM3FBDestReadModeOr 0xac98 #define PM3FBDestReadMode_ReadDisable 0<<0 #define PM3FBDestReadMode_ReadEnable 1<<0 - #define PM3FBDestReadMode_StripePitch(sp) (((sp)&0x7)<<2 - #define PM3FBDestReadMode_StripeHeight(sh) (((sh)&0x7)<<7 + #define PM3FBDestReadMode_StripePitch(sp) (((sp)&0x7)<<2) + #define PM3FBDestReadMode_StripeHeight(sh) (((sh)&0x7)<<7) #define PM3FBDestReadMode_Enable0 1<<8 #define PM3FBDestReadMode_Enable1 1<<9 #define PM3FBDestReadMode_Enable2 1<<10 #define PM3FBDestReadMode_Enable3 1<<11 - #define PM3FBDestReadMode_Layout0(l) (((l)&0x3)<<12 - #define PM3FBDestReadMode_Layout1(l) (((l)&0x3)<<14 - #define PM3FBDestReadMode_Layout2(l) (((l)&0x3)<<16 - #define PM3FBDestReadMode_Layout3(l) (((l)&0x3)<<18 + #define PM3FBDestReadMode_Layout0(l) (((l)&0x3)<<12) + #define PM3FBDestReadMode_Layout1(l) (((l)&0x3)<<14) + #define PM3FBDestReadMode_Layout2(l) (((l)&0x3)<<16) + #define PM3FBDestReadMode_Layout3(l) (((l)&0x3)<<18) #define PM3FBDestReadMode_Origin0 1<<20 #define PM3FBDestReadMode_Origin1 1<<21 #define PM3FBDestReadMode_Origin2 1<<22 @@ -640,16 +640,16 @@ #define PM3FBSourceReadModeOr 0xaca8 #define PM3FBSourceReadMode_ReadDisable (0<<0) #define PM3FBSourceReadMode_ReadEnable (1<<0) - #define PM3FBSourceReadMode_StripePitch(sp) (((sp)&0x7)<<2 - #define PM3FBSourceReadMode_StripeHeight(sh) (((sh)&0x7)<<7 - #define PM3FBSourceReadMode_Layout(l) (((l)&0x3)<<8 + #define PM3FBSourceReadMode_StripePitch(sp) (((sp)&0x7)<<2) + #define PM3FBSourceReadMode_StripeHeight(sh) (((sh)&0x7)<<7) + #define PM3FBSourceReadMode_Layout(l) (((l)&0x3)<<8) #define PM3FBSourceReadMode_Origin 1<<10 #define PM3FBSourceReadMode_Blocking 1<<11 #define PM3FBSourceReadMode_UserTexelCoord 1<<13 #define PM3FBSourceReadMode_WrapXEnable 1<<14 #define PM3FBSourceReadMode_WrapYEnable 1<<15 - #define PM3FBSourceReadMode_WrapX(w) (((w)&0xf)<<16 - #define PM3FBSourceReadMode_WrapY(w) (((w)&0xf)<<20 + #define PM3FBSourceReadMode_WrapX(w) (((w)&0xf)<<16) + #define PM3FBSourceReadMode_WrapY(w) (((w)&0xf)<<20) #define PM3FBSourceReadMode_ExternalSourceData 1<<24 #define PM3FBWriteBufferAddr0 0xb000 #define PM3FBWriteBufferAddr1 0xb008 @@ -942,7 +942,7 @@ #define PM3Window 0x8980 #define PM3Window_ForceLBUpdate 1<<3 #define PM3Window_LBUpdateSource 1<<4 - #define PM3Window_FrameCount(c) (((c)&0xff)<<9 + #define PM3Window_FrameCount(c) (((c)&0xff)<<9) #define PM3Window_StencilFCP 1<<17 #define PM3Window_DepthFCP 1<<18 #define PM3Window_OverrideWriteFiltering 1<<19 -- cgit v1.2.3 From a3d77d35be6f416a250c528c3ed5c70013a915e8 Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Fri, 8 Dec 2006 02:41:04 -0800 Subject: [PATCH] dm: suspend: parameter change Change the interface of dm_suspend() so that we can pass several options without increasing the number of parameters. The existing 'do_lockfs' integer parameter is replaced by a flag DM_SUSPEND_LOCKFS_FLAG. There is no functional change to the code. Test results: I have tested 'dmsetup suspend' command with/without the '--nolockfs' option and confirmed the do_lockfs value is correctly set. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Signed-off-by: Alasdair G Kergon Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/device-mapper.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 03ef41c1eaa..9194ff2d08c 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -173,7 +173,7 @@ void *dm_get_mdptr(struct mapped_device *md); /* * A device can still be used while suspended, but I/O is deferred. */ -int dm_suspend(struct mapped_device *md, int with_lockfs); +int dm_suspend(struct mapped_device *md, unsigned suspend_flags); int dm_resume(struct mapped_device *md); /* -- cgit v1.2.3 From 45cbcd798354251b99694086af9d57c99e89bb43 Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Fri, 8 Dec 2006 02:41:05 -0800 Subject: [PATCH] dm: map and endio return code clarification Tighten the use of return values from the target map and end_io functions. Values of 2 and above are now explictly reserved for future use. There are no existing targets using such values. The patch has no effect on existing behaviour. o Reserve return values of 2 and above from target map functions. Any positive value currently indicates "mapping complete", but all existing drivers use the value 1. We now make that a requirement so we can assign new meaning to higher values in future. The new definition of return values from target map functions is: < 0 : error = 0 : The target will handle the io (DM_MAPIO_SUBMITTED). = 1 : Mapping completed (DM_MAPIO_REMAPPED). > 1 : Reserved (undefined). Previously this was the same as '= 1'. o Reserve return values of 2 and above from target end_io functions for similar reasons. DM_ENDIO_INCOMPLETE is introduced for a return value of 1. Test results: I have tested by using the multipath target. I/Os succeed when valid paths exist. I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set. I/Os fail when there are no valid paths and queue_if_no_path is not set. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Signed-off-by: Alasdair G Kergon Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/device-mapper.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 9194ff2d08c..2e5c42346c3 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -39,7 +39,7 @@ typedef void (*dm_dtr_fn) (struct dm_target *ti); * The map function must return: * < 0: error * = 0: The target will handle the io by resubmitting it later - * > 0: simple remap complete + * = 1: simple remap complete */ typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio, union map_info *map_context); -- cgit v1.2.3 From 81fdb096dbcedcc3b94c7e47b59362b5214891e2 Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Fri, 8 Dec 2006 02:41:07 -0800 Subject: [PATCH] dm: ioctl: add noflush suspend Provide a dm ioctl option to request noflush suspending. (See next patch for what this is for.) As the interface is extended, the version number is incremented. Other than accepting the new option through the interface, There is no change to existing behaviour. Test results: Confirmed the option is given from user-space correctly. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Signed-off-by: Alasdair G Kergon Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/dm-ioctl.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h index 8853fc4d1c5..b9348610782 100644 --- a/include/linux/dm-ioctl.h +++ b/include/linux/dm-ioctl.h @@ -285,9 +285,9 @@ typedef char ioctl_struct[308]; #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 10 +#define DM_VERSION_MINOR 11 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2006-09-14)" +#define DM_VERSION_EXTRA "-ioctl (2006-10-12)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ @@ -323,4 +323,9 @@ typedef char ioctl_struct[308]; */ #define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */ +/* + * Set this to suspend without flushing queued ios. + */ +#define DM_NOFLUSH_FLAG (1 << 11) /* In */ + #endif /* _LINUX_DM_IOCTL_H */ -- cgit v1.2.3 From 2e93ccc1933d08d32d9bde3784c3823e67b9b030 Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Fri, 8 Dec 2006 02:41:09 -0800 Subject: [PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Signed-off-by: Alasdair G Kergon Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/device-mapper.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 2e5c42346c3..499f5373e21 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -40,6 +40,7 @@ typedef void (*dm_dtr_fn) (struct dm_target *ti); * < 0: error * = 0: The target will handle the io by resubmitting it later * = 1: simple remap complete + * = 2: The target wants to push back the io */ typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio, union map_info *map_context); @@ -50,6 +51,7 @@ typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio, * 0 : ended successfully * 1 : for some reason the io has still not completed (eg, * multipath target might want to requeue a failed io). + * 2 : The target wants to push back the io */ typedef int (*dm_endio_fn) (struct dm_target *ti, struct bio *bio, int error, @@ -188,6 +190,7 @@ int dm_wait_event(struct mapped_device *md, int event_nr); const char *dm_device_name(struct mapped_device *md); struct gendisk *dm_disk(struct mapped_device *md); int dm_suspended(struct mapped_device *md); +int dm_noflush_suspending(struct dm_target *ti); /* * Geometry functions. -- cgit v1.2.3 From dde5845a529ff753364a6d1aea61180946270bfa Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 8 Dec 2006 18:40:44 +0100 Subject: [PATCH] Generic HID layer - code split The "big main" split of USB HID code into generic HID code and USB-transport specific HID handling. Signed-off-by: Jiri Kosina Signed-off-by: Marcel Holtmann Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/hid-debug.h | 757 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/hid.h | 540 +++++++++++++++++++++++++++++++++ 2 files changed, 1297 insertions(+) create mode 100644 include/linux/hid-debug.h create mode 100644 include/linux/hid.h (limited to 'include') diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h new file mode 100644 index 00000000000..f04d6d75c09 --- /dev/null +++ b/include/linux/hid-debug.h @@ -0,0 +1,757 @@ +/* + * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $ + * + * (c) 1999 Andreas Gal + * (c) 2000-2001 Vojtech Pavlik + * + * Some debug stuff for the HID parser. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to , or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include + +struct hid_usage_entry { + unsigned page; + unsigned usage; + char *description; +}; + +static const struct hid_usage_entry hid_usage_table[] = { + { 0, 0, "Undefined" }, + { 1, 0, "GenericDesktop" }, + {0, 0x01, "Pointer"}, + {0, 0x02, "Mouse"}, + {0, 0x04, "Joystick"}, + {0, 0x05, "GamePad"}, + {0, 0x06, "Keyboard"}, + {0, 0x07, "Keypad"}, + {0, 0x08, "MultiAxis"}, + {0, 0x30, "X"}, + {0, 0x31, "Y"}, + {0, 0x32, "Z"}, + {0, 0x33, "Rx"}, + {0, 0x34, "Ry"}, + {0, 0x35, "Rz"}, + {0, 0x36, "Slider"}, + {0, 0x37, "Dial"}, + {0, 0x38, "Wheel"}, + {0, 0x39, "HatSwitch"}, + {0, 0x3a, "CountedBuffer"}, + {0, 0x3b, "ByteCount"}, + {0, 0x3c, "MotionWakeup"}, + {0, 0x3d, "Start"}, + {0, 0x3e, "Select"}, + {0, 0x40, "Vx"}, + {0, 0x41, "Vy"}, + {0, 0x42, "Vz"}, + {0, 0x43, "Vbrx"}, + {0, 0x44, "Vbry"}, + {0, 0x45, "Vbrz"}, + {0, 0x46, "Vno"}, + {0, 0x80, "SystemControl"}, + {0, 0x81, "SystemPowerDown"}, + {0, 0x82, "SystemSleep"}, + {0, 0x83, "SystemWakeUp"}, + {0, 0x84, "SystemContextMenu"}, + {0, 0x85, "SystemMainMenu"}, + {0, 0x86, "SystemAppMenu"}, + {0, 0x87, "SystemMenuHelp"}, + {0, 0x88, "SystemMenuExit"}, + {0, 0x89, "SystemMenuSelect"}, + {0, 0x8a, "SystemMenuRight"}, + {0, 0x8b, "SystemMenuLeft"}, + {0, 0x8c, "SystemMenuUp"}, + {0, 0x8d, "SystemMenuDown"}, + {0, 0x90, "D-PadUp"}, + {0, 0x91, "D-PadDown"}, + {0, 0x92, "D-PadRight"}, + {0, 0x93, "D-PadLeft"}, + { 2, 0, "Simulation" }, + {0, 0xb0, "Aileron"}, + {0, 0xb1, "AileronTrim"}, + {0, 0xb2, "Anti-Torque"}, + {0, 0xb3, "Autopilot"}, + {0, 0xb4, "Chaff"}, + {0, 0xb5, "Collective"}, + {0, 0xb6, "DiveBrake"}, + {0, 0xb7, "ElectronicCountermeasures"}, + {0, 0xb8, "Elevator"}, + {0, 0xb9, "ElevatorTrim"}, + {0, 0xba, "Rudder"}, + {0, 0xbb, "Throttle"}, + {0, 0xbc, "FlightCommunications"}, + {0, 0xbd, "FlareRelease"}, + {0, 0xbe, "LandingGear"}, + {0, 0xbf, "ToeBrake"}, + { 7, 0, "Keyboard" }, + { 8, 0, "LED" }, + {0, 0x01, "NumLock"}, + {0, 0x02, "CapsLock"}, + {0, 0x03, "ScrollLock"}, + {0, 0x04, "Compose"}, + {0, 0x05, "Kana"}, + {0, 0x4b, "GenericIndicator"}, + { 9, 0, "Button" }, + { 10, 0, "Ordinal" }, + { 12, 0, "Consumer" }, + {0, 0x238, "HorizontalWheel"}, + { 13, 0, "Digitizers" }, + {0, 0x01, "Digitizer"}, + {0, 0x02, "Pen"}, + {0, 0x03, "LightPen"}, + {0, 0x04, "TouchScreen"}, + {0, 0x05, "TouchPad"}, + {0, 0x20, "Stylus"}, + {0, 0x21, "Puck"}, + {0, 0x22, "Finger"}, + {0, 0x30, "TipPressure"}, + {0, 0x31, "BarrelPressure"}, + {0, 0x32, "InRange"}, + {0, 0x33, "Touch"}, + {0, 0x34, "UnTouch"}, + {0, 0x35, "Tap"}, + {0, 0x39, "TabletFunctionKey"}, + {0, 0x3a, "ProgramChangeKey"}, + {0, 0x3c, "Invert"}, + {0, 0x42, "TipSwitch"}, + {0, 0x43, "SecondaryTipSwitch"}, + {0, 0x44, "BarrelSwitch"}, + {0, 0x45, "Eraser"}, + {0, 0x46, "TabletPick"}, + { 15, 0, "PhysicalInterfaceDevice" }, + {0, 0x00, "Undefined"}, + {0, 0x01, "Physical_Interface_Device"}, + {0, 0x20, "Normal"}, + {0, 0x21, "Set_Effect_Report"}, + {0, 0x22, "Effect_Block_Index"}, + {0, 0x23, "Parameter_Block_Offset"}, + {0, 0x24, "ROM_Flag"}, + {0, 0x25, "Effect_Type"}, + {0, 0x26, "ET_Constant_Force"}, + {0, 0x27, "ET_Ramp"}, + {0, 0x28, "ET_Custom_Force_Data"}, + {0, 0x30, "ET_Square"}, + {0, 0x31, "ET_Sine"}, + {0, 0x32, "ET_Triangle"}, + {0, 0x33, "ET_Sawtooth_Up"}, + {0, 0x34, "ET_Sawtooth_Down"}, + {0, 0x40, "ET_Spring"}, + {0, 0x41, "ET_Damper"}, + {0, 0x42, "ET_Inertia"}, + {0, 0x43, "ET_Friction"}, + {0, 0x50, "Duration"}, + {0, 0x51, "Sample_Period"}, + {0, 0x52, "Gain"}, + {0, 0x53, "Trigger_Button"}, + {0, 0x54, "Trigger_Repeat_Interval"}, + {0, 0x55, "Axes_Enable"}, + {0, 0x56, "Direction_Enable"}, + {0, 0x57, "Direction"}, + {0, 0x58, "Type_Specific_Block_Offset"}, + {0, 0x59, "Block_Type"}, + {0, 0x5A, "Set_Envelope_Report"}, + {0, 0x5B, "Attack_Level"}, + {0, 0x5C, "Attack_Time"}, + {0, 0x5D, "Fade_Level"}, + {0, 0x5E, "Fade_Time"}, + {0, 0x5F, "Set_Condition_Report"}, + {0, 0x60, "CP_Offset"}, + {0, 0x61, "Positive_Coefficient"}, + {0, 0x62, "Negative_Coefficient"}, + {0, 0x63, "Positive_Saturation"}, + {0, 0x64, "Negative_Saturation"}, + {0, 0x65, "Dead_Band"}, + {0, 0x66, "Download_Force_Sample"}, + {0, 0x67, "Isoch_Custom_Force_Enable"}, + {0, 0x68, "Custom_Force_Data_Report"}, + {0, 0x69, "Custom_Force_Data"}, + {0, 0x6A, "Custom_Force_Vendor_Defined_Data"}, + {0, 0x6B, "Set_Custom_Force_Report"}, + {0, 0x6C, "Custom_Force_Data_Offset"}, + {0, 0x6D, "Sample_Count"}, + {0, 0x6E, "Set_Periodic_Report"}, + {0, 0x6F, "Offset"}, + {0, 0x70, "Magnitude"}, + {0, 0x71, "Phase"}, + {0, 0x72, "Period"}, + {0, 0x73, "Set_Constant_Force_Report"}, + {0, 0x74, "Set_Ramp_Force_Report"}, + {0, 0x75, "Ramp_Start"}, + {0, 0x76, "Ramp_End"}, + {0, 0x77, "Effect_Operation_Report"}, + {0, 0x78, "Effect_Operation"}, + {0, 0x79, "Op_Effect_Start"}, + {0, 0x7A, "Op_Effect_Start_Solo"}, + {0, 0x7B, "Op_Effect_Stop"}, + {0, 0x7C, "Loop_Count"}, + {0, 0x7D, "Device_Gain_Report"}, + {0, 0x7E, "Device_Gain"}, + {0, 0x7F, "PID_Pool_Report"}, + {0, 0x80, "RAM_Pool_Size"}, + {0, 0x81, "ROM_Pool_Size"}, + {0, 0x82, "ROM_Effect_Block_Count"}, + {0, 0x83, "Simultaneous_Effects_Max"}, + {0, 0x84, "Pool_Alignment"}, + {0, 0x85, "PID_Pool_Move_Report"}, + {0, 0x86, "Move_Source"}, + {0, 0x87, "Move_Destination"}, + {0, 0x88, "Move_Length"}, + {0, 0x89, "PID_Block_Load_Report"}, + {0, 0x8B, "Block_Load_Status"}, + {0, 0x8C, "Block_Load_Success"}, + {0, 0x8D, "Block_Load_Full"}, + {0, 0x8E, "Block_Load_Error"}, + {0, 0x8F, "Block_Handle"}, + {0, 0x90, "PID_Block_Free_Report"}, + {0, 0x91, "Type_Specific_Block_Handle"}, + {0, 0x92, "PID_State_Report"}, + {0, 0x94, "Effect_Playing"}, + {0, 0x95, "PID_Device_Control_Report"}, + {0, 0x96, "PID_Device_Control"}, + {0, 0x97, "DC_Enable_Actuators"}, + {0, 0x98, "DC_Disable_Actuators"}, + {0, 0x99, "DC_Stop_All_Effects"}, + {0, 0x9A, "DC_Device_Reset"}, + {0, 0x9B, "DC_Device_Pause"}, + {0, 0x9C, "DC_Device_Continue"}, + {0, 0x9F, "Device_Paused"}, + {0, 0xA0, "Actuators_Enabled"}, + {0, 0xA4, "Safety_Switch"}, + {0, 0xA5, "Actuator_Override_Switch"}, + {0, 0xA6, "Actuator_Power"}, + {0, 0xA7, "Start_Delay"}, + {0, 0xA8, "Parameter_Block_Size"}, + {0, 0xA9, "Device_Managed_Pool"}, + {0, 0xAA, "Shared_Parameter_Blocks"}, + {0, 0xAB, "Create_New_Effect_Report"}, + {0, 0xAC, "RAM_Pool_Available"}, + { 0x84, 0, "Power Device" }, + { 0x84, 0x02, "PresentStatus" }, + { 0x84, 0x03, "ChangeStatus" }, + { 0x84, 0x04, "UPS" }, + { 0x84, 0x05, "PowerSupply" }, + { 0x84, 0x10, "BatterySystem" }, + { 0x84, 0x11, "BatterySystemID" }, + { 0x84, 0x12, "Battery" }, + { 0x84, 0x13, "BatteryID" }, + { 0x84, 0x14, "Charger" }, + { 0x84, 0x15, "ChargerID" }, + { 0x84, 0x16, "PowerConverter" }, + { 0x84, 0x17, "PowerConverterID" }, + { 0x84, 0x18, "OutletSystem" }, + { 0x84, 0x19, "OutletSystemID" }, + { 0x84, 0x1a, "Input" }, + { 0x84, 0x1b, "InputID" }, + { 0x84, 0x1c, "Output" }, + { 0x84, 0x1d, "OutputID" }, + { 0x84, 0x1e, "Flow" }, + { 0x84, 0x1f, "FlowID" }, + { 0x84, 0x20, "Outlet" }, + { 0x84, 0x21, "OutletID" }, + { 0x84, 0x22, "Gang" }, + { 0x84, 0x24, "PowerSummary" }, + { 0x84, 0x25, "PowerSummaryID" }, + { 0x84, 0x30, "Voltage" }, + { 0x84, 0x31, "Current" }, + { 0x84, 0x32, "Frequency" }, + { 0x84, 0x33, "ApparentPower" }, + { 0x84, 0x35, "PercentLoad" }, + { 0x84, 0x40, "ConfigVoltage" }, + { 0x84, 0x41, "ConfigCurrent" }, + { 0x84, 0x43, "ConfigApparentPower" }, + { 0x84, 0x53, "LowVoltageTransfer" }, + { 0x84, 0x54, "HighVoltageTransfer" }, + { 0x84, 0x56, "DelayBeforeStartup" }, + { 0x84, 0x57, "DelayBeforeShutdown" }, + { 0x84, 0x58, "Test" }, + { 0x84, 0x5a, "AudibleAlarmControl" }, + { 0x84, 0x60, "Present" }, + { 0x84, 0x61, "Good" }, + { 0x84, 0x62, "InternalFailure" }, + { 0x84, 0x65, "Overload" }, + { 0x84, 0x66, "OverCharged" }, + { 0x84, 0x67, "OverTemperature" }, + { 0x84, 0x68, "ShutdownRequested" }, + { 0x84, 0x69, "ShutdownImminent" }, + { 0x84, 0x6b, "SwitchOn/Off" }, + { 0x84, 0x6c, "Switchable" }, + { 0x84, 0x6d, "Used" }, + { 0x84, 0x6e, "Boost" }, + { 0x84, 0x73, "CommunicationLost" }, + { 0x84, 0xfd, "iManufacturer" }, + { 0x84, 0xfe, "iProduct" }, + { 0x84, 0xff, "iSerialNumber" }, + { 0x85, 0, "Battery System" }, + { 0x85, 0x01, "SMBBatteryMode" }, + { 0x85, 0x02, "SMBBatteryStatus" }, + { 0x85, 0x03, "SMBAlarmWarning" }, + { 0x85, 0x04, "SMBChargerMode" }, + { 0x85, 0x05, "SMBChargerStatus" }, + { 0x85, 0x06, "SMBChargerSpecInfo" }, + { 0x85, 0x07, "SMBSelectorState" }, + { 0x85, 0x08, "SMBSelectorPresets" }, + { 0x85, 0x09, "SMBSelectorInfo" }, + { 0x85, 0x29, "RemainingCapacityLimit" }, + { 0x85, 0x2c, "CapacityMode" }, + { 0x85, 0x42, "BelowRemainingCapacityLimit" }, + { 0x85, 0x44, "Charging" }, + { 0x85, 0x45, "Discharging" }, + { 0x85, 0x4b, "NeedReplacement" }, + { 0x85, 0x66, "RemainingCapacity" }, + { 0x85, 0x68, "RunTimeToEmpty" }, + { 0x85, 0x6a, "AverageTimeToFull" }, + { 0x85, 0x83, "DesignCapacity" }, + { 0x85, 0x85, "ManufacturerDate" }, + { 0x85, 0x89, "iDeviceChemistry" }, + { 0x85, 0x8b, "Rechargable" }, + { 0x85, 0x8f, "iOEMInformation" }, + { 0x85, 0x8d, "CapacityGranularity1" }, + { 0x85, 0xd0, "ACPresent" }, + /* pages 0xff00 to 0xffff are vendor-specific */ + { 0xffff, 0, "Vendor-specific-FF" }, + { 0, 0, NULL } +}; + +static void resolv_usage_page(unsigned page) { + const struct hid_usage_entry *p; + + for (p = hid_usage_table; p->description; p++) + if (p->page == page) { + printk("%s", p->description); + return; + } + printk("%04x", page); +} + +static void resolv_usage(unsigned usage) { + const struct hid_usage_entry *p; + + resolv_usage_page(usage >> 16); + printk("."); + for (p = hid_usage_table; p->description; p++) + if (p->page == (usage >> 16)) { + for(++p; p->description && p->usage != 0; p++) + if (p->usage == (usage & 0xffff)) { + printk("%s", p->description); + return; + } + break; + } + printk("%04x", usage & 0xffff); +} + +__inline__ static void tab(int n) { + while (n--) printk(" "); +} + +static void hid_dump_field(struct hid_field *field, int n) { + int j; + + if (field->physical) { + tab(n); + printk("Physical("); + resolv_usage(field->physical); printk(")\n"); + } + if (field->logical) { + tab(n); + printk("Logical("); + resolv_usage(field->logical); printk(")\n"); + } + tab(n); printk("Usage(%d)\n", field->maxusage); + for (j = 0; j < field->maxusage; j++) { + tab(n+2);resolv_usage(field->usage[j].hid); printk("\n"); + } + if (field->logical_minimum != field->logical_maximum) { + tab(n); printk("Logical Minimum(%d)\n", field->logical_minimum); + tab(n); printk("Logical Maximum(%d)\n", field->logical_maximum); + } + if (field->physical_minimum != field->physical_maximum) { + tab(n); printk("Physical Minimum(%d)\n", field->physical_minimum); + tab(n); printk("Physical Maximum(%d)\n", field->physical_maximum); + } + if (field->unit_exponent) { + tab(n); printk("Unit Exponent(%d)\n", field->unit_exponent); + } + if (field->unit) { + char *systems[5] = { "None", "SI Linear", "SI Rotation", "English Linear", "English Rotation" }; + char *units[5][8] = { + { "None", "None", "None", "None", "None", "None", "None", "None" }, + { "None", "Centimeter", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" }, + { "None", "Radians", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" }, + { "None", "Inch", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" }, + { "None", "Degrees", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" } + }; + + int i; + int sys; + __u32 data = field->unit; + + /* First nibble tells us which system we're in. */ + sys = data & 0xf; + data >>= 4; + + if(sys > 4) { + tab(n); printk("Unit(Invalid)\n"); + } + else { + int earlier_unit = 0; + + tab(n); printk("Unit(%s : ", systems[sys]); + + for (i=1 ; i>= 4; + if (nibble != 0) { + if(earlier_unit++ > 0) + printk("*"); + printk("%s", units[sys][i]); + if(nibble != 1) { + /* This is a _signed_ nibble(!) */ + + int val = nibble & 0x7; + if(nibble & 0x08) + val = -((0x7 & ~val) +1); + printk("^%d", val); + } + } + } + printk(")\n"); + } + } + tab(n); printk("Report Size(%u)\n", field->report_size); + tab(n); printk("Report Count(%u)\n", field->report_count); + tab(n); printk("Report Offset(%u)\n", field->report_offset); + + tab(n); printk("Flags( "); + j = field->flags; + printk("%s", HID_MAIN_ITEM_CONSTANT & j ? "Constant " : ""); + printk("%s", HID_MAIN_ITEM_VARIABLE & j ? "Variable " : "Array "); + printk("%s", HID_MAIN_ITEM_RELATIVE & j ? "Relative " : "Absolute "); + printk("%s", HID_MAIN_ITEM_WRAP & j ? "Wrap " : ""); + printk("%s", HID_MAIN_ITEM_NONLINEAR & j ? "NonLinear " : ""); + printk("%s", HID_MAIN_ITEM_NO_PREFERRED & j ? "NoPrefferedState " : ""); + printk("%s", HID_MAIN_ITEM_NULL_STATE & j ? "NullState " : ""); + printk("%s", HID_MAIN_ITEM_VOLATILE & j ? "Volatile " : ""); + printk("%s", HID_MAIN_ITEM_BUFFERED_BYTE & j ? "BufferedByte " : ""); + printk(")\n"); +} + +static void __attribute__((unused)) hid_dump_device(struct hid_device *device) { + struct hid_report_enum *report_enum; + struct hid_report *report; + struct list_head *list; + unsigned i,k; + static char *table[] = {"INPUT", "OUTPUT", "FEATURE"}; + + for (i = 0; i < HID_REPORT_TYPES; i++) { + report_enum = device->report_enum + i; + list = report_enum->report_list.next; + while (list != &report_enum->report_list) { + report = (struct hid_report *) list; + tab(2); + printk("%s", table[i]); + if (report->id) + printk("(%d)", report->id); + printk("[%s]", table[report->type]); + printk("\n"); + for (k = 0; k < report->maxfield; k++) { + tab(4); + printk("Field(%d)\n", k); + hid_dump_field(report->field[k], 6); + } + list = list->next; + } + } +} + +static void __attribute__((unused)) hid_dump_input(struct hid_usage *usage, __s32 value) { + printk("hid-debug: input "); + resolv_usage(usage->hid); + printk(" = %d\n", value); +} + + +static char *events[EV_MAX + 1] = { + [EV_SYN] = "Sync", [EV_KEY] = "Key", + [EV_REL] = "Relative", [EV_ABS] = "Absolute", + [EV_MSC] = "Misc", [EV_LED] = "LED", + [EV_SND] = "Sound", [EV_REP] = "Repeat", + [EV_FF] = "ForceFeedback", [EV_PWR] = "Power", + [EV_FF_STATUS] = "ForceFeedbackStatus", +}; + +static char *syncs[2] = { + [SYN_REPORT] = "Report", [SYN_CONFIG] = "Config", +}; +static char *keys[KEY_MAX + 1] = { + [KEY_RESERVED] = "Reserved", [KEY_ESC] = "Esc", + [KEY_1] = "1", [KEY_2] = "2", + [KEY_3] = "3", [KEY_4] = "4", + [KEY_5] = "5", [KEY_6] = "6", + [KEY_7] = "7", [KEY_8] = "8", + [KEY_9] = "9", [KEY_0] = "0", + [KEY_MINUS] = "Minus", [KEY_EQUAL] = "Equal", + [KEY_BACKSPACE] = "Backspace", [KEY_TAB] = "Tab", + [KEY_Q] = "Q", [KEY_W] = "W", + [KEY_E] = "E", [KEY_R] = "R", + [KEY_T] = "T", [KEY_Y] = "Y", + [KEY_U] = "U", [KEY_I] = "I", + [KEY_O] = "O", [KEY_P] = "P", + [KEY_LEFTBRACE] = "LeftBrace", [KEY_RIGHTBRACE] = "RightBrace", + [KEY_ENTER] = "Enter", [KEY_LEFTCTRL] = "LeftControl", + [KEY_A] = "A", [KEY_S] = "S", + [KEY_D] = "D", [KEY_F] = "F", + [KEY_G] = "G", [KEY_H] = "H", + [KEY_J] = "J", [KEY_K] = "K", + [KEY_L] = "L", [KEY_SEMICOLON] = "Semicolon", + [KEY_APOSTROPHE] = "Apostrophe", [KEY_GRAVE] = "Grave", + [KEY_LEFTSHIFT] = "LeftShift", [KEY_BACKSLASH] = "BackSlash", + [KEY_Z] = "Z", [KEY_X] = "X", + [KEY_C] = "C", [KEY_V] = "V", + [KEY_B] = "B", [KEY_N] = "N", + [KEY_M] = "M", [KEY_COMMA] = "Comma", + [KEY_DOT] = "Dot", [KEY_SLASH] = "Slash", + [KEY_RIGHTSHIFT] = "RightShift", [KEY_KPASTERISK] = "KPAsterisk", + [KEY_LEFTALT] = "LeftAlt", [KEY_SPACE] = "Space", + [KEY_CAPSLOCK] = "CapsLock", [KEY_F1] = "F1", + [KEY_F2] = "F2", [KEY_F3] = "F3", + [KEY_F4] = "F4", [KEY_F5] = "F5", + [KEY_F6] = "F6", [KEY_F7] = "F7", + [KEY_F8] = "F8", [KEY_F9] = "F9", + [KEY_F10] = "F10", [KEY_NUMLOCK] = "NumLock", + [KEY_SCROLLLOCK] = "ScrollLock", [KEY_KP7] = "KP7", + [KEY_KP8] = "KP8", [KEY_KP9] = "KP9", + [KEY_KPMINUS] = "KPMinus", [KEY_KP4] = "KP4", + [KEY_KP5] = "KP5", [KEY_KP6] = "KP6", + [KEY_KPPLUS] = "KPPlus", [KEY_KP1] = "KP1", + [KEY_KP2] = "KP2", [KEY_KP3] = "KP3", + [KEY_KP0] = "KP0", [KEY_KPDOT] = "KPDot", + [KEY_ZENKAKUHANKAKU] = "Zenkaku/Hankaku", [KEY_102ND] = "102nd", + [KEY_F11] = "F11", [KEY_F12] = "F12", + [KEY_RO] = "RO", [KEY_KATAKANA] = "Katakana", + [KEY_HIRAGANA] = "HIRAGANA", [KEY_HENKAN] = "Henkan", + [KEY_KATAKANAHIRAGANA] = "Katakana/Hiragana", [KEY_MUHENKAN] = "Muhenkan", + [KEY_KPJPCOMMA] = "KPJpComma", [KEY_KPENTER] = "KPEnter", + [KEY_RIGHTCTRL] = "RightCtrl", [KEY_KPSLASH] = "KPSlash", + [KEY_SYSRQ] = "SysRq", [KEY_RIGHTALT] = "RightAlt", + [KEY_LINEFEED] = "LineFeed", [KEY_HOME] = "Home", + [KEY_UP] = "Up", [KEY_PAGEUP] = "PageUp", + [KEY_LEFT] = "Left", [KEY_RIGHT] = "Right", + [KEY_END] = "End", [KEY_DOWN] = "Down", + [KEY_PAGEDOWN] = "PageDown", [KEY_INSERT] = "Insert", + [KEY_DELETE] = "Delete", [KEY_MACRO] = "Macro", + [KEY_MUTE] = "Mute", [KEY_VOLUMEDOWN] = "VolumeDown", + [KEY_VOLUMEUP] = "VolumeUp", [KEY_POWER] = "Power", + [KEY_KPEQUAL] = "KPEqual", [KEY_KPPLUSMINUS] = "KPPlusMinus", + [KEY_PAUSE] = "Pause", [KEY_KPCOMMA] = "KPComma", + [KEY_HANGUEL] = "Hangeul", [KEY_HANJA] = "Hanja", + [KEY_YEN] = "Yen", [KEY_LEFTMETA] = "LeftMeta", + [KEY_RIGHTMETA] = "RightMeta", [KEY_COMPOSE] = "Compose", + [KEY_STOP] = "Stop", [KEY_AGAIN] = "Again", + [KEY_PROPS] = "Props", [KEY_UNDO] = "Undo", + [KEY_FRONT] = "Front", [KEY_COPY] = "Copy", + [KEY_OPEN] = "Open", [KEY_PASTE] = "Paste", + [KEY_FIND] = "Find", [KEY_CUT] = "Cut", + [KEY_HELP] = "Help", [KEY_MENU] = "Menu", + [KEY_CALC] = "Calc", [KEY_SETUP] = "Setup", + [KEY_SLEEP] = "Sleep", [KEY_WAKEUP] = "WakeUp", + [KEY_FILE] = "File", [KEY_SENDFILE] = "SendFile", + [KEY_DELETEFILE] = "DeleteFile", [KEY_XFER] = "X-fer", + [KEY_PROG1] = "Prog1", [KEY_PROG2] = "Prog2", + [KEY_WWW] = "WWW", [KEY_MSDOS] = "MSDOS", + [KEY_COFFEE] = "Coffee", [KEY_DIRECTION] = "Direction", + [KEY_CYCLEWINDOWS] = "CycleWindows", [KEY_MAIL] = "Mail", + [KEY_BOOKMARKS] = "Bookmarks", [KEY_COMPUTER] = "Computer", + [KEY_BACK] = "Back", [KEY_FORWARD] = "Forward", + [KEY_CLOSECD] = "CloseCD", [KEY_EJECTCD] = "EjectCD", + [KEY_EJECTCLOSECD] = "EjectCloseCD", [KEY_NEXTSONG] = "NextSong", + [KEY_PLAYPAUSE] = "PlayPause", [KEY_PREVIOUSSONG] = "PreviousSong", + [KEY_STOPCD] = "StopCD", [KEY_RECORD] = "Record", + [KEY_REWIND] = "Rewind", [KEY_PHONE] = "Phone", + [KEY_ISO] = "ISOKey", [KEY_CONFIG] = "Config", + [KEY_HOMEPAGE] = "HomePage", [KEY_REFRESH] = "Refresh", + [KEY_EXIT] = "Exit", [KEY_MOVE] = "Move", + [KEY_EDIT] = "Edit", [KEY_SCROLLUP] = "ScrollUp", + [KEY_SCROLLDOWN] = "ScrollDown", [KEY_KPLEFTPAREN] = "KPLeftParenthesis", + [KEY_KPRIGHTPAREN] = "KPRightParenthesis", [KEY_NEW] = "New", + [KEY_REDO] = "Redo", [KEY_F13] = "F13", + [KEY_F14] = "F14", [KEY_F15] = "F15", + [KEY_F16] = "F16", [KEY_F17] = "F17", + [KEY_F18] = "F18", [KEY_F19] = "F19", + [KEY_F20] = "F20", [KEY_F21] = "F21", + [KEY_F22] = "F22", [KEY_F23] = "F23", + [KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD", + [KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3", + [KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend", + [KEY_CLOSE] = "Close", [KEY_PLAY] = "Play", + [KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost", + [KEY_PRINT] = "Print", [KEY_HP] = "HP", + [KEY_CAMERA] = "Camera", [KEY_SOUND] = "Sound", + [KEY_QUESTION] = "Question", [KEY_EMAIL] = "Email", + [KEY_CHAT] = "Chat", [KEY_SEARCH] = "Search", + [KEY_CONNECT] = "Connect", [KEY_FINANCE] = "Finance", + [KEY_SPORT] = "Sport", [KEY_SHOP] = "Shop", + [KEY_ALTERASE] = "AlternateErase", [KEY_CANCEL] = "Cancel", + [KEY_BRIGHTNESSDOWN] = "BrightnessDown", [KEY_BRIGHTNESSUP] = "BrightnessUp", + [KEY_MEDIA] = "Media", [KEY_UNKNOWN] = "Unknown", + [BTN_0] = "Btn0", [BTN_1] = "Btn1", + [BTN_2] = "Btn2", [BTN_3] = "Btn3", + [BTN_4] = "Btn4", [BTN_5] = "Btn5", + [BTN_6] = "Btn6", [BTN_7] = "Btn7", + [BTN_8] = "Btn8", [BTN_9] = "Btn9", + [BTN_LEFT] = "LeftBtn", [BTN_RIGHT] = "RightBtn", + [BTN_MIDDLE] = "MiddleBtn", [BTN_SIDE] = "SideBtn", + [BTN_EXTRA] = "ExtraBtn", [BTN_FORWARD] = "ForwardBtn", + [BTN_BACK] = "BackBtn", [BTN_TASK] = "TaskBtn", + [BTN_TRIGGER] = "Trigger", [BTN_THUMB] = "ThumbBtn", + [BTN_THUMB2] = "ThumbBtn2", [BTN_TOP] = "TopBtn", + [BTN_TOP2] = "TopBtn2", [BTN_PINKIE] = "PinkieBtn", + [BTN_BASE] = "BaseBtn", [BTN_BASE2] = "BaseBtn2", + [BTN_BASE3] = "BaseBtn3", [BTN_BASE4] = "BaseBtn4", + [BTN_BASE5] = "BaseBtn5", [BTN_BASE6] = "BaseBtn6", + [BTN_DEAD] = "BtnDead", [BTN_A] = "BtnA", + [BTN_B] = "BtnB", [BTN_C] = "BtnC", + [BTN_X] = "BtnX", [BTN_Y] = "BtnY", + [BTN_Z] = "BtnZ", [BTN_TL] = "BtnTL", + [BTN_TR] = "BtnTR", [BTN_TL2] = "BtnTL2", + [BTN_TR2] = "BtnTR2", [BTN_SELECT] = "BtnSelect", + [BTN_START] = "BtnStart", [BTN_MODE] = "BtnMode", + [BTN_THUMBL] = "BtnThumbL", [BTN_THUMBR] = "BtnThumbR", + [BTN_TOOL_PEN] = "ToolPen", [BTN_TOOL_RUBBER] = "ToolRubber", + [BTN_TOOL_BRUSH] = "ToolBrush", [BTN_TOOL_PENCIL] = "ToolPencil", + [BTN_TOOL_AIRBRUSH] = "ToolAirbrush", [BTN_TOOL_FINGER] = "ToolFinger", + [BTN_TOOL_MOUSE] = "ToolMouse", [BTN_TOOL_LENS] = "ToolLens", + [BTN_TOUCH] = "Touch", [BTN_STYLUS] = "Stylus", + [BTN_STYLUS2] = "Stylus2", [BTN_TOOL_DOUBLETAP] = "ToolDoubleTap", + [BTN_TOOL_TRIPLETAP] = "ToolTripleTap", [BTN_GEAR_DOWN] = "WheelBtn", + [BTN_GEAR_UP] = "Gear up", [KEY_OK] = "Ok", + [KEY_SELECT] = "Select", [KEY_GOTO] = "Goto", + [KEY_CLEAR] = "Clear", [KEY_POWER2] = "Power2", + [KEY_OPTION] = "Option", [KEY_INFO] = "Info", + [KEY_TIME] = "Time", [KEY_VENDOR] = "Vendor", + [KEY_ARCHIVE] = "Archive", [KEY_PROGRAM] = "Program", + [KEY_CHANNEL] = "Channel", [KEY_FAVORITES] = "Favorites", + [KEY_EPG] = "EPG", [KEY_PVR] = "PVR", + [KEY_MHP] = "MHP", [KEY_LANGUAGE] = "Language", + [KEY_TITLE] = "Title", [KEY_SUBTITLE] = "Subtitle", + [KEY_ANGLE] = "Angle", [KEY_ZOOM] = "Zoom", + [KEY_MODE] = "Mode", [KEY_KEYBOARD] = "Keyboard", + [KEY_SCREEN] = "Screen", [KEY_PC] = "PC", + [KEY_TV] = "TV", [KEY_TV2] = "TV2", + [KEY_VCR] = "VCR", [KEY_VCR2] = "VCR2", + [KEY_SAT] = "Sat", [KEY_SAT2] = "Sat2", + [KEY_CD] = "CD", [KEY_TAPE] = "Tape", + [KEY_RADIO] = "Radio", [KEY_TUNER] = "Tuner", + [KEY_PLAYER] = "Player", [KEY_TEXT] = "Text", + [KEY_DVD] = "DVD", [KEY_AUX] = "Aux", + [KEY_MP3] = "MP3", [KEY_AUDIO] = "Audio", + [KEY_VIDEO] = "Video", [KEY_DIRECTORY] = "Directory", + [KEY_LIST] = "List", [KEY_MEMO] = "Memo", + [KEY_CALENDAR] = "Calendar", [KEY_RED] = "Red", + [KEY_GREEN] = "Green", [KEY_YELLOW] = "Yellow", + [KEY_BLUE] = "Blue", [KEY_CHANNELUP] = "ChannelUp", + [KEY_CHANNELDOWN] = "ChannelDown", [KEY_FIRST] = "First", + [KEY_LAST] = "Last", [KEY_AB] = "AB", + [KEY_NEXT] = "Next", [KEY_RESTART] = "Restart", + [KEY_SLOW] = "Slow", [KEY_SHUFFLE] = "Shuffle", + [KEY_BREAK] = "Break", [KEY_PREVIOUS] = "Previous", + [KEY_DIGITS] = "Digits", [KEY_TEEN] = "TEEN", + [KEY_TWEN] = "TWEN", [KEY_DEL_EOL] = "DeleteEOL", + [KEY_DEL_EOS] = "DeleteEOS", [KEY_INS_LINE] = "InsertLine", + [KEY_DEL_LINE] = "DeleteLine", + [KEY_SEND] = "Send", [KEY_REPLY] = "Reply", + [KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save", + [KEY_DOCUMENTS] = "Documents", + [KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC", + [KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2", + [KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D", + [KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F", + [KEY_FN_S] = "Fn+S", + [KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2", + [KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4", + [KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6", + [KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8", + [KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10", + [KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12", + [KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle", + [KEY_KBDILLUMDOWN] = "KbdIlluminationDown", + [KEY_KBDILLUMUP] = "KbdIlluminationUp", + [KEY_SWITCHVIDEOMODE] = "SwitchVideoMode", +}; + +static char *relatives[REL_MAX + 1] = { + [REL_X] = "X", [REL_Y] = "Y", + [REL_Z] = "Z", [REL_HWHEEL] = "HWheel", + [REL_DIAL] = "Dial", [REL_WHEEL] = "Wheel", + [REL_MISC] = "Misc", +}; + +static char *absolutes[ABS_MAX + 1] = { + [ABS_X] = "X", [ABS_Y] = "Y", + [ABS_Z] = "Z", [ABS_RX] = "Rx", + [ABS_RY] = "Ry", [ABS_RZ] = "Rz", + [ABS_THROTTLE] = "Throttle", [ABS_RUDDER] = "Rudder", + [ABS_WHEEL] = "Wheel", [ABS_GAS] = "Gas", + [ABS_BRAKE] = "Brake", [ABS_HAT0X] = "Hat0X", + [ABS_HAT0Y] = "Hat0Y", [ABS_HAT1X] = "Hat1X", + [ABS_HAT1Y] = "Hat1Y", [ABS_HAT2X] = "Hat2X", + [ABS_HAT2Y] = "Hat2Y", [ABS_HAT3X] = "Hat3X", + [ABS_HAT3Y] = "Hat 3Y", [ABS_PRESSURE] = "Pressure", + [ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt", + [ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "Tool Width", + [ABS_VOLUME] = "Volume", [ABS_MISC] = "Misc", +}; + +static char *misc[MSC_MAX + 1] = { + [MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled", + [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData" +}; + +static char *leds[LED_MAX + 1] = { + [LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock", + [LED_SCROLLL] = "ScrollLock", [LED_COMPOSE] = "Compose", + [LED_KANA] = "Kana", [LED_SLEEP] = "Sleep", + [LED_SUSPEND] = "Suspend", [LED_MUTE] = "Mute", + [LED_MISC] = "Misc", +}; + +static char *repeats[REP_MAX + 1] = { + [REP_DELAY] = "Delay", [REP_PERIOD] = "Period" +}; + +static char *sounds[SND_MAX + 1] = { + [SND_CLICK] = "Click", [SND_BELL] = "Bell", + [SND_TONE] = "Tone" +}; + +static char **names[EV_MAX + 1] = { + [EV_SYN] = syncs, [EV_KEY] = keys, + [EV_REL] = relatives, [EV_ABS] = absolutes, + [EV_MSC] = misc, [EV_LED] = leds, + [EV_SND] = sounds, [EV_REP] = repeats, +}; + +static void __attribute__((unused)) resolv_event(__u8 type, __u16 code) { + + printk("%s.%s", events[type] ? events[type] : "?", + names[type] ? (names[type][code] ? names[type][code] : "?") : "?"); +} diff --git a/include/linux/hid.h b/include/linux/hid.h new file mode 100644 index 00000000000..ee567ae6fec --- /dev/null +++ b/include/linux/hid.h @@ -0,0 +1,540 @@ +#ifndef __HID_H +#define __HID_H + +/* + * $Id: hid.h,v 1.24 2001/12/27 10:37:41 vojtech Exp $ + * + * Copyright (c) 1999 Andreas Gal + * Copyright (c) 2000-2001 Vojtech Pavlik + * Copyright (c) 2006 Jiri Kosina + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to , or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include +#include +#include +#include +#include +#include + +/* + * USB HID (Human Interface Device) interface class code + */ + +#define USB_INTERFACE_CLASS_HID 3 + +/* + * USB HID interface subclass and protocol codes + */ + +#define USB_INTERFACE_SUBCLASS_BOOT 1 +#define USB_INTERFACE_PROTOCOL_KEYBOARD 1 +#define USB_INTERFACE_PROTOCOL_MOUSE 2 + +/* + * HID class requests + */ + +#define HID_REQ_GET_REPORT 0x01 +#define HID_REQ_GET_IDLE 0x02 +#define HID_REQ_GET_PROTOCOL 0x03 +#define HID_REQ_SET_REPORT 0x09 +#define HID_REQ_SET_IDLE 0x0A +#define HID_REQ_SET_PROTOCOL 0x0B + +/* + * HID class descriptor types + */ + +#define HID_DT_HID (USB_TYPE_CLASS | 0x01) +#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02) +#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) + +/* + * We parse each description item into this structure. Short items data + * values are expanded to 32-bit signed int, long items contain a pointer + * into the data area. + */ + +struct hid_item { + unsigned format; + __u8 size; + __u8 type; + __u8 tag; + union { + __u8 u8; + __s8 s8; + __u16 u16; + __s16 s16; + __u32 u32; + __s32 s32; + __u8 *longdata; + } data; +}; + +/* + * HID report item format + */ + +#define HID_ITEM_FORMAT_SHORT 0 +#define HID_ITEM_FORMAT_LONG 1 + +/* + * Special tag indicating long items + */ + +#define HID_ITEM_TAG_LONG 15 + +/* + * HID report descriptor item type (prefix bit 2,3) + */ + +#define HID_ITEM_TYPE_MAIN 0 +#define HID_ITEM_TYPE_GLOBAL 1 +#define HID_ITEM_TYPE_LOCAL 2 +#define HID_ITEM_TYPE_RESERVED 3 + +/* + * HID report descriptor main item tags + */ + +#define HID_MAIN_ITEM_TAG_INPUT 8 +#define HID_MAIN_ITEM_TAG_OUTPUT 9 +#define HID_MAIN_ITEM_TAG_FEATURE 11 +#define HID_MAIN_ITEM_TAG_BEGIN_COLLECTION 10 +#define HID_MAIN_ITEM_TAG_END_COLLECTION 12 + +/* + * HID report descriptor main item contents + */ + +#define HID_MAIN_ITEM_CONSTANT 0x001 +#define HID_MAIN_ITEM_VARIABLE 0x002 +#define HID_MAIN_ITEM_RELATIVE 0x004 +#define HID_MAIN_ITEM_WRAP 0x008 +#define HID_MAIN_ITEM_NONLINEAR 0x010 +#define HID_MAIN_ITEM_NO_PREFERRED 0x020 +#define HID_MAIN_ITEM_NULL_STATE 0x040 +#define HID_MAIN_ITEM_VOLATILE 0x080 +#define HID_MAIN_ITEM_BUFFERED_BYTE 0x100 + +/* + * HID report descriptor collection item types + */ + +#define HID_COLLECTION_PHYSICAL 0 +#define HID_COLLECTION_APPLICATION 1 +#define HID_COLLECTION_LOGICAL 2 + +/* + * HID report descriptor global item tags + */ + +#define HID_GLOBAL_ITEM_TAG_USAGE_PAGE 0 +#define HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM 1 +#define HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM 2 +#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM 3 +#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM 4 +#define HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT 5 +#define HID_GLOBAL_ITEM_TAG_UNIT 6 +#define HID_GLOBAL_ITEM_TAG_REPORT_SIZE 7 +#define HID_GLOBAL_ITEM_TAG_REPORT_ID 8 +#define HID_GLOBAL_ITEM_TAG_REPORT_COUNT 9 +#define HID_GLOBAL_ITEM_TAG_PUSH 10 +#define HID_GLOBAL_ITEM_TAG_POP 11 + +/* + * HID report descriptor local item tags + */ + +#define HID_LOCAL_ITEM_TAG_USAGE 0 +#define HID_LOCAL_ITEM_TAG_USAGE_MINIMUM 1 +#define HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM 2 +#define HID_LOCAL_ITEM_TAG_DESIGNATOR_INDEX 3 +#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MINIMUM 4 +#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MAXIMUM 5 +#define HID_LOCAL_ITEM_TAG_STRING_INDEX 7 +#define HID_LOCAL_ITEM_TAG_STRING_MINIMUM 8 +#define HID_LOCAL_ITEM_TAG_STRING_MAXIMUM 9 +#define HID_LOCAL_ITEM_TAG_DELIMITER 10 + +/* + * HID usage tables + */ + +#define HID_USAGE_PAGE 0xffff0000 + +#define HID_UP_UNDEFINED 0x00000000 +#define HID_UP_GENDESK 0x00010000 +#define HID_UP_SIMULATION 0x00020000 +#define HID_UP_KEYBOARD 0x00070000 +#define HID_UP_LED 0x00080000 +#define HID_UP_BUTTON 0x00090000 +#define HID_UP_ORDINAL 0x000a0000 +#define HID_UP_CONSUMER 0x000c0000 +#define HID_UP_DIGITIZER 0x000d0000 +#define HID_UP_PID 0x000f0000 +#define HID_UP_HPVENDOR 0xff7f0000 +#define HID_UP_MSVENDOR 0xff000000 +#define HID_UP_CUSTOM 0x00ff0000 +#define HID_UP_LOGIVENDOR 0xffbc0000 + +#define HID_USAGE 0x0000ffff + +#define HID_GD_POINTER 0x00010001 +#define HID_GD_MOUSE 0x00010002 +#define HID_GD_JOYSTICK 0x00010004 +#define HID_GD_GAMEPAD 0x00010005 +#define HID_GD_KEYBOARD 0x00010006 +#define HID_GD_KEYPAD 0x00010007 +#define HID_GD_MULTIAXIS 0x00010008 +#define HID_GD_X 0x00010030 +#define HID_GD_Y 0x00010031 +#define HID_GD_Z 0x00010032 +#define HID_GD_RX 0x00010033 +#define HID_GD_RY 0x00010034 +#define HID_GD_RZ 0x00010035 +#define HID_GD_SLIDER 0x00010036 +#define HID_GD_DIAL 0x00010037 +#define HID_GD_WHEEL 0x00010038 +#define HID_GD_HATSWITCH 0x00010039 +#define HID_GD_BUFFER 0x0001003a +#define HID_GD_BYTECOUNT 0x0001003b +#define HID_GD_MOTION 0x0001003c +#define HID_GD_START 0x0001003d +#define HID_GD_SELECT 0x0001003e +#define HID_GD_VX 0x00010040 +#define HID_GD_VY 0x00010041 +#define HID_GD_VZ 0x00010042 +#define HID_GD_VBRX 0x00010043 +#define HID_GD_VBRY 0x00010044 +#define HID_GD_VBRZ 0x00010045 +#define HID_GD_VNO 0x00010046 +#define HID_GD_FEATURE 0x00010047 +#define HID_GD_UP 0x00010090 +#define HID_GD_DOWN 0x00010091 +#define HID_GD_RIGHT 0x00010092 +#define HID_GD_LEFT 0x00010093 + +/* + * HID report types --- Ouch! HID spec says 1 2 3! + */ + +#define HID_INPUT_REPORT 0 +#define HID_OUTPUT_REPORT 1 +#define HID_FEATURE_REPORT 2 + +/* + * HID device quirks. + */ + +#define HID_QUIRK_INVERT 0x00000001 +#define HID_QUIRK_NOTOUCH 0x00000002 +#define HID_QUIRK_IGNORE 0x00000004 +#define HID_QUIRK_NOGET 0x00000008 +#define HID_QUIRK_HIDDEV 0x00000010 +#define HID_QUIRK_BADPAD 0x00000020 +#define HID_QUIRK_MULTI_INPUT 0x00000040 +#define HID_QUIRK_2WHEEL_MOUSE_HACK_7 0x00000080 +#define HID_QUIRK_2WHEEL_MOUSE_HACK_5 0x00000100 +#define HID_QUIRK_2WHEEL_MOUSE_HACK_ON 0x00000200 +#define HID_QUIRK_MIGHTYMOUSE 0x00000400 +#define HID_QUIRK_CYMOTION 0x00000800 +#define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000 +#define HID_QUIRK_POWERBOOK_FN_ON 0x00002000 +#define HID_QUIRK_INVERT_HWHEEL 0x00004000 +#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000 +#define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000 + +/* + * This is the global environment of the parser. This information is + * persistent for main-items. The global environment can be saved and + * restored with PUSH/POP statements. + */ + +struct hid_global { + unsigned usage_page; + __s32 logical_minimum; + __s32 logical_maximum; + __s32 physical_minimum; + __s32 physical_maximum; + __s32 unit_exponent; + unsigned unit; + unsigned report_id; + unsigned report_size; + unsigned report_count; +}; + +/* + * This is the local environment. It is persistent up the next main-item. + */ + +#define HID_MAX_DESCRIPTOR_SIZE 4096 +#define HID_MAX_USAGES 1024 +#define HID_DEFAULT_NUM_COLLECTIONS 16 + +struct hid_local { + unsigned usage[HID_MAX_USAGES]; /* usage array */ + unsigned collection_index[HID_MAX_USAGES]; /* collection index array */ + unsigned usage_index; + unsigned usage_minimum; + unsigned delimiter_depth; + unsigned delimiter_branch; +}; + +/* + * This is the collection stack. We climb up the stack to determine + * application and function of each field. + */ + +struct hid_collection { + unsigned type; + unsigned usage; + unsigned level; +}; + +struct hid_usage { + unsigned hid; /* hid usage code */ + unsigned collection_index; /* index into collection array */ + /* hidinput data */ + __u16 code; /* input driver code */ + __u8 type; /* input driver type */ + __s8 hat_min; /* hat switch fun */ + __s8 hat_max; /* ditto */ + __s8 hat_dir; /* ditto */ +}; + +struct hid_input; + +struct hid_field { + unsigned physical; /* physical usage for this field */ + unsigned logical; /* logical usage for this field */ + unsigned application; /* application usage for this field */ + struct hid_usage *usage; /* usage table for this function */ + unsigned maxusage; /* maximum usage index */ + unsigned flags; /* main-item flags (i.e. volatile,array,constant) */ + unsigned report_offset; /* bit offset in the report */ + unsigned report_size; /* size of this field in the report */ + unsigned report_count; /* number of this field in the report */ + unsigned report_type; /* (input,output,feature) */ + __s32 *value; /* last known value(s) */ + __s32 logical_minimum; + __s32 logical_maximum; + __s32 physical_minimum; + __s32 physical_maximum; + __s32 unit_exponent; + unsigned unit; + struct hid_report *report; /* associated report */ + unsigned index; /* index into report->field[] */ + /* hidinput data */ + struct hid_input *hidinput; /* associated input structure */ + __u16 dpad; /* dpad input code */ +}; + +#define HID_MAX_FIELDS 64 + +struct hid_report { + struct list_head list; + unsigned id; /* id of this report */ + unsigned type; /* report type */ + struct hid_field *field[HID_MAX_FIELDS]; /* fields of the report */ + unsigned maxfield; /* maximum valid field index */ + unsigned size; /* size of the report (bits) */ + struct hid_device *device; /* associated device */ +}; + +struct hid_report_enum { + unsigned numbered; + struct list_head report_list; + struct hid_report *report_id_hash[256]; +}; + +#define HID_REPORT_TYPES 3 + +#define HID_MIN_BUFFER_SIZE 64 /* make sure there is at least a packet size of space */ +#define HID_MAX_BUFFER_SIZE 4096 /* 4kb */ +#define HID_CONTROL_FIFO_SIZE 256 /* to init devices with >100 reports */ +#define HID_OUTPUT_FIFO_SIZE 64 + +struct hid_control_fifo { + unsigned char dir; + struct hid_report *report; +}; + +#define HID_CLAIMED_INPUT 1 +#define HID_CLAIMED_HIDDEV 2 + +#define HID_CTRL_RUNNING 1 +#define HID_OUT_RUNNING 2 +#define HID_IN_RUNNING 3 +#define HID_RESET_PENDING 4 +#define HID_SUSPENDED 5 +#define HID_CLEAR_HALT 6 + +struct hid_input { + struct list_head list; + struct hid_report *report; + struct input_dev *input; +}; + +struct hid_device { /* device report descriptor */ + __u8 *rdesc; + unsigned rsize; + struct hid_collection *collection; /* List of HID collections */ + unsigned collection_size; /* Number of allocated hid_collections */ + unsigned maxcollection; /* Number of parsed collections */ + unsigned maxapplication; /* Number of applications */ + unsigned version; /* HID version */ + unsigned country; /* HID country */ + struct hid_report_enum report_enum[HID_REPORT_TYPES]; + + struct usb_device *dev; /* USB device */ + struct usb_interface *intf; /* USB interface */ + int ifnum; /* USB interface number */ + + unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ + struct timer_list io_retry; /* Retry timer */ + unsigned long stop_retry; /* Time to give up, in jiffies */ + unsigned int retry_delay; /* Delay length in ms */ + struct work_struct reset_work; /* Task context for resets */ + + unsigned int bufsize; /* URB buffer size */ + + struct urb *urbin; /* Input URB */ + char *inbuf; /* Input buffer */ + dma_addr_t inbuf_dma; /* Input buffer dma */ + spinlock_t inlock; /* Input fifo spinlock */ + + struct urb *urbctrl; /* Control URB */ + struct usb_ctrlrequest *cr; /* Control request struct */ + dma_addr_t cr_dma; /* Control request struct dma */ + struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE]; /* Control fifo */ + unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */ + char *ctrlbuf; /* Control buffer */ + dma_addr_t ctrlbuf_dma; /* Control buffer dma */ + spinlock_t ctrllock; /* Control fifo spinlock */ + + struct urb *urbout; /* Output URB */ + struct hid_report *out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */ + unsigned char outhead, outtail; /* Output pipe fifo head & tail */ + char *outbuf; /* Output buffer */ + dma_addr_t outbuf_dma; /* Output buffer dma */ + spinlock_t outlock; /* Output fifo spinlock */ + + unsigned claimed; /* Claimed by hidinput, hiddev? */ + unsigned quirks; /* Various quirks the device can pull on us */ + + struct list_head inputs; /* The list of inputs */ + void *hiddev; /* The hiddev structure */ + int minor; /* Hiddev minor number */ + + wait_queue_head_t wait; /* For sleeping */ + + int open; /* is the device open by anyone? */ + char name[128]; /* Device name */ + char phys[64]; /* Device physical location */ + char uniq[64]; /* Device unique identifier (serial #) */ + +#ifdef CONFIG_USB_HIDINPUT_POWERBOOK + unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; + unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; +#endif +}; + +#define HID_GLOBAL_STACK_SIZE 4 +#define HID_COLLECTION_STACK_SIZE 4 + +struct hid_parser { + struct hid_global global; + struct hid_global global_stack[HID_GLOBAL_STACK_SIZE]; + unsigned global_stack_ptr; + struct hid_local local; + unsigned collection_stack[HID_COLLECTION_STACK_SIZE]; + unsigned collection_stack_ptr; + struct hid_device *device; +}; + +struct hid_class_descriptor { + __u8 bDescriptorType; + __u16 wDescriptorLength; +} __attribute__ ((packed)); + +struct hid_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u16 bcdHID; + __u8 bCountryCode; + __u8 bNumDescriptors; + + struct hid_class_descriptor desc[1]; +} __attribute__ ((packed)); + +#ifdef DEBUG +#include "hid-debug.h" +#else +#define hid_dump_input(a,b) do { } while (0) +#define hid_dump_device(c) do { } while (0) +#define hid_dump_field(a,b) do { } while (0) +#define resolv_usage(a) do { } while (0) +#define resolv_event(a,b) do { } while (0) +#endif + +#ifdef CONFIG_HID +/* Applications from HID Usage Tables 4/8/99 Version 1.1 */ +/* We ignore a few input applications that are not widely used */ +#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001)) +extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32); +extern void hidinput_report_event(struct hid_device *hid, struct hid_report *report); +extern int hidinput_connect(struct hid_device *); +extern void hidinput_disconnect(struct hid_device *); +#else +#define IS_INPUT_APPLICATION(a) (0) +static inline void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) { } +static inline void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { } +static inline int hidinput_connect(struct hid_device *hid) { return -ENODEV; } +static inline void hidinput_disconnect(struct hid_device *hid) { } +#endif + +int hid_set_field(struct hid_field *, unsigned, __s32); +int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field); +void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt); +void hid_output_report(struct hid_report *report, __u8 *data); +void hid_free_device(struct hid_device *device); +struct hid_device *hid_parse_report(__u8 *start, unsigned size); + +#ifdef CONFIG_HID_FF +int hid_ff_init(struct hid_device *hid); + +int hid_lgff_init(struct hid_device *hid); +int hid_tmff_init(struct hid_device *hid); +int hid_zpff_init(struct hid_device *hid); +#ifdef CONFIG_HID_PID +int hid_pidff_init(struct hid_device *hid); +#else +static inline int hid_pidff_init(struct hid_device *hid) { return -ENODEV; } +#endif + +#else +static inline int hid_ff_init(struct hid_device *hid) { return -1; } +#endif +#endif + -- cgit v1.2.3 From 229695e51efc4ed5e04ab471c82591d0f432909d Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 8 Dec 2006 18:40:53 +0100 Subject: [PATCH] Generic HID layer - API - fixed generic API (added neccessary EXPORT_SYMBOL, fixed hid.h to provide correct prototypes) - extended hid_device with open/close/event function pointers to driver-specific functions - added driver specific driver_data to hid_device Signed-off-by: Jiri Kosina Signed-off-by: Marcel Holtmann Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/hid.h | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index ee567ae6fec..0473b45b73b 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -403,11 +403,17 @@ struct hid_device { /* device report descriptor */ unsigned collection_size; /* Number of allocated hid_collections */ unsigned maxcollection; /* Number of parsed collections */ unsigned maxapplication; /* Number of applications */ + unsigned short bus; /* BUS ID */ + unsigned short vendor; /* Vendor ID */ + unsigned short product; /* Product ID */ unsigned version; /* HID version */ unsigned country; /* HID country */ struct hid_report_enum report_enum[HID_REPORT_TYPES]; - struct usb_device *dev; /* USB device */ + struct usb_device *dev; /* device */ + + /* USB specific fields */ + struct usb_interface *intf; /* USB interface */ int ifnum; /* USB interface number */ @@ -454,6 +460,13 @@ struct hid_device { /* device report descriptor */ char phys[64]; /* Device physical location */ char uniq[64]; /* Device unique identifier (serial #) */ + void *driver_data; + + /* device-specific function pointers */ + int (*hidinput_input_event) (struct input_dev *, unsigned int, unsigned int, int); + int (*hidinput_open) (struct input_dev *); + void (*hidinput_close) (struct input_dev *); + #ifdef CONFIG_USB_HIDINPUT_POWERBOOK unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; @@ -502,17 +515,15 @@ struct hid_descriptor { /* Applications from HID Usage Tables 4/8/99 Version 1.1 */ /* We ignore a few input applications that are not widely used */ #define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001)) +#else +#define IS_INPUT_APPLICATION(a) (0) +#endif + +/* HID core API */ extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32); extern void hidinput_report_event(struct hid_device *hid, struct hid_report *report); extern int hidinput_connect(struct hid_device *); extern void hidinput_disconnect(struct hid_device *); -#else -#define IS_INPUT_APPLICATION(a) (0) -static inline void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) { } -static inline void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { } -static inline int hidinput_connect(struct hid_device *hid) { return -ENODEV; } -static inline void hidinput_disconnect(struct hid_device *hid) { } -#endif int hid_set_field(struct hid_field *, unsigned, __s32); int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field); @@ -536,5 +547,14 @@ static inline int hid_pidff_init(struct hid_device *hid) { return -ENODEV; } #else static inline int hid_ff_init(struct hid_device *hid) { return -1; } #endif +#ifdef DEBUG +#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \ + __FILE__ , ## arg) +#else +#define dbg(format, arg...) do {} while (0) +#endif + +#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ + __FILE__ , ## arg) #endif -- cgit v1.2.3 From 4916b3a57fc94664677d439b911b8aaf86c7ec23 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 8 Dec 2006 18:41:03 +0100 Subject: [PATCH] Generic HID layer - USB API - 'dev' in struct hid_device changed from struct usb_device to struct device and fixed all the users - renamed functions which are part of USB HID API from 'hid_*' to 'usbhid_*' - force feedback initialization moved from common part into USB-specific driver - added usbhid.h header for USB HID API users - removed USB-specific fields from struct hid_device and moved them to new usbhid_device, which is pointed to by hid_device->driver_data - fixed all USB users to use this new structure Signed-off-by: Jiri Kosina Signed-off-by: Marcel Holtmann Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/hid.h | 36 +----------------------------------- 1 file changed, 1 insertion(+), 35 deletions(-) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 0473b45b73b..fc6f74228da 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -410,41 +410,7 @@ struct hid_device { /* device report descriptor */ unsigned country; /* HID country */ struct hid_report_enum report_enum[HID_REPORT_TYPES]; - struct usb_device *dev; /* device */ - - /* USB specific fields */ - - struct usb_interface *intf; /* USB interface */ - int ifnum; /* USB interface number */ - - unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ - struct timer_list io_retry; /* Retry timer */ - unsigned long stop_retry; /* Time to give up, in jiffies */ - unsigned int retry_delay; /* Delay length in ms */ - struct work_struct reset_work; /* Task context for resets */ - - unsigned int bufsize; /* URB buffer size */ - - struct urb *urbin; /* Input URB */ - char *inbuf; /* Input buffer */ - dma_addr_t inbuf_dma; /* Input buffer dma */ - spinlock_t inlock; /* Input fifo spinlock */ - - struct urb *urbctrl; /* Control URB */ - struct usb_ctrlrequest *cr; /* Control request struct */ - dma_addr_t cr_dma; /* Control request struct dma */ - struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE]; /* Control fifo */ - unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */ - char *ctrlbuf; /* Control buffer */ - dma_addr_t ctrlbuf_dma; /* Control buffer dma */ - spinlock_t ctrllock; /* Control fifo spinlock */ - - struct urb *urbout; /* Output URB */ - struct hid_report *out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */ - unsigned char outhead, outtail; /* Output pipe fifo head & tail */ - char *outbuf; /* Output buffer */ - dma_addr_t outbuf_dma; /* Output buffer dma */ - spinlock_t outlock; /* Output fifo spinlock */ + struct device *dev; /* device */ unsigned claimed; /* Claimed by hidinput, hiddev? */ unsigned quirks; /* Various quirks the device can pull on us */ -- cgit v1.2.3 From aa938f7974b82cfd9ee955031987344f332b7c77 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 8 Dec 2006 18:41:10 +0100 Subject: [PATCH] Generic HID layer - hiddev - hiddev is USB-only (agreed with Marcel Holtmann that Bluetooth currently doesn't need it, and future planned interface (rawhid) will be more flexible and usable) - both HID and USB-hid can be now compiled as modules (wasn't possible before hiddev was fully separated from generic HID layer) Signed-off-by: Jiri Kosina Signed-off-by: Marcel Holtmann Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/hid.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index fc6f74228da..5a969a137b8 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -433,6 +433,10 @@ struct hid_device { /* device report descriptor */ int (*hidinput_open) (struct input_dev *); void (*hidinput_close) (struct input_dev *); + /* hiddev event handler */ + void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field, + struct hid_usage *, __s32); + #ifdef CONFIG_USB_HIDINPUT_POWERBOOK unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; @@ -477,13 +481,9 @@ struct hid_descriptor { #define resolv_event(a,b) do { } while (0) #endif -#ifdef CONFIG_HID /* Applications from HID Usage Tables 4/8/99 Version 1.1 */ /* We ignore a few input applications that are not widely used */ #define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001)) -#else -#define IS_INPUT_APPLICATION(a) (0) -#endif /* HID core API */ extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32); -- cgit v1.2.3 From aa8de2f038baec993f07ef66fb3e94481d1ec22b Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 8 Dec 2006 18:41:17 +0100 Subject: [PATCH] Generic HID layer - input and event reporting hid_input_report() was needlessly USB-specific in USB HID. This patch makes the function independent of HID implementation and fixes all the current users. Bluetooth patches comply with this prototype. Signed-off-by: Jiri Kosina Signed-off-by: Marcel Holtmann Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/hid.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 5a969a137b8..342b4e639ac 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -436,7 +436,7 @@ struct hid_device { /* device report descriptor */ /* hiddev event handler */ void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field, struct hid_usage *, __s32); - + void (*hiddev_report_event) (struct hid_device *, struct hid_report *); #ifdef CONFIG_USB_HIDINPUT_POWERBOOK unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; @@ -492,6 +492,7 @@ extern int hidinput_connect(struct hid_device *); extern void hidinput_disconnect(struct hid_device *); int hid_set_field(struct hid_field *, unsigned, __s32); +int hid_input_report(struct hid_device *, int type, u8 *, int, int); int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field); void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt); void hid_output_report(struct hid_report *report, __u8 *data); -- cgit v1.2.3 From 4c2ae844b5ef85fd4b571c9c91ac48afa6ef2dfc Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 8 Dec 2006 18:41:22 +0100 Subject: [PATCH] Generic HID layer - pb_fnmode pb_fnmode parameter has to be passed to usbhid, both for compatibility reasons and also because it logically belongs there. Also removes empty hid-input.c file in drivers/usb/input. Signed-off-by: Jiri Kosina Signed-off-by: Marcel Holtmann Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/hid.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 342b4e639ac..770120add15 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -438,6 +438,7 @@ struct hid_device { /* device report descriptor */ struct hid_usage *, __s32); void (*hiddev_report_event) (struct hid_device *, struct hid_report *); #ifdef CONFIG_USB_HIDINPUT_POWERBOOK + unsigned int pb_fnmode; unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; #endif -- cgit v1.2.3 From 4c198557c6b45956a6f54b958fb97a15b02a6a3b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 8 Dec 2006 17:46:58 +1100 Subject: [POWERPC] Add DSCR SPR to sysfs POWER6 adds a new SPR, the data stream control register (DSCR). It can be used to adjust how agressive the prefetch mechanisms are. Its possible we may want to context switch this, but for now just export it to userspace via sysfs so we can adjust it. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- include/asm-powerpc/cputable.h | 6 ++++-- include/asm-powerpc/reg.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 6fe5c9d4ca3..782adbf1f7a 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -152,6 +152,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) #define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) #define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) +#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) #ifndef __ASSEMBLY__ @@ -330,13 +331,14 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE) + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR) #define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \ - CPU_FTR_SPURR | CPU_FTR_REAL_LE) + CPU_FTR_SPURR | CPU_FTR_REAL_LE | CPU_FTR_DSCR) #define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 6faae7b14d5..cacdecca610 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -143,6 +143,7 @@ /* Special Purpose Registers (SPRNs)*/ #define SPRN_CTR 0x009 /* Count Register */ +#define SPRN_DSCR 0x11 #define SPRN_CTRLF 0x088 #define SPRN_CTRLT 0x098 #define CTRL_CT 0xc0000000 /* current thread */ -- cgit v1.2.3 From f050982a9b7c4edc414f0d5543c3cb24504223c6 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 8 Dec 2006 17:51:13 +1100 Subject: [POWERPC] Add SPURR SPR to sysfs Now we have a SPURR cpu feature bit, we can export it to userspace in sysfs. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- include/asm-powerpc/reg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index cacdecca610..a3631b15754 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -164,6 +164,7 @@ #define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ #define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ #define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ +#define SPRN_SPURR 0x134 /* Scaled PURR */ #define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ #define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ #define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ -- cgit v1.2.3 From 14b36af46a1d3652aff6734ea24816995dff8123 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 5 Dec 2006 17:05:44 +0100 Subject: [MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- include/asm-mips/mach-rm/cpu-feature-overrides.h | 46 ++++++++++++++++++++++ include/asm-mips/mach-rm/mc146818rtc.h | 17 ++++++++ include/asm-mips/mach-rm/timex.h | 13 ++++++ .../asm-mips/mach-rm200/cpu-feature-overrides.h | 46 ---------------------- include/asm-mips/mach-rm200/mc146818rtc.h | 17 -------- include/asm-mips/mach-rm200/timex.h | 13 ------ include/asm-mips/war.h | 2 +- 7 files changed, 77 insertions(+), 77 deletions(-) create mode 100644 include/asm-mips/mach-rm/cpu-feature-overrides.h create mode 100644 include/asm-mips/mach-rm/mc146818rtc.h create mode 100644 include/asm-mips/mach-rm/timex.h delete mode 100644 include/asm-mips/mach-rm200/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-rm200/mc146818rtc.h delete mode 100644 include/asm-mips/mach-rm200/timex.h (limited to 'include') diff --git a/include/asm-mips/mach-rm/cpu-feature-overrides.h b/include/asm-mips/mach-rm/cpu-feature-overrides.h new file mode 100644 index 00000000000..11410ae10d3 --- /dev/null +++ b/include/asm-mips/mach-rm/cpu-feature-overrides.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + * + * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors. + */ +#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H + +#include + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_watch 0 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 1 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-rm/mc146818rtc.h b/include/asm-mips/mach-rm/mc146818rtc.h new file mode 100644 index 00000000000..d37ae68dc6a --- /dev/null +++ b/include/asm-mips/mach-rm/mc146818rtc.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip with ARC epoch. + */ +#ifndef __ASM_MACH_RM200_MC146818RTC_H +#define __ASM_MACH_RM200_MC146818RTC_H + +#define mc146818_decode_year(year) ((year) + 1980) + +#include_next + +#endif /* __ASM_MACH_RM200_MC146818RTC_H */ diff --git a/include/asm-mips/mach-rm/timex.h b/include/asm-mips/mach-rm/timex.h new file mode 100644 index 00000000000..11ff6cb0f21 --- /dev/null +++ b/include/asm-mips/mach-rm/timex.h @@ -0,0 +1,13 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2005 by Ralf Baechle + */ +#ifndef __ASM_MACH_RM200_TIMEX_H +#define __ASM_MACH_RM200_TIMEX_H + +#define CLOCK_TICK_RATE 1193182 + +#endif /* __ASM_MACH_RM200_TIMEX_H */ diff --git a/include/asm-mips/mach-rm200/cpu-feature-overrides.h b/include/asm-mips/mach-rm200/cpu-feature-overrides.h deleted file mode 100644 index 11410ae10d3..00000000000 --- a/include/asm-mips/mach-rm200/cpu-feature-overrides.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle - * - * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors. - */ -#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H - -#include - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -#define cpu_has_fpu 1 -#define cpu_has_32fpr 1 -#define cpu_has_counter 1 -#define cpu_has_watch 0 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 1 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 0 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-rm200/mc146818rtc.h b/include/asm-mips/mach-rm200/mc146818rtc.h deleted file mode 100644 index d37ae68dc6a..00000000000 --- a/include/asm-mips/mach-rm200/mc146818rtc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip with ARC epoch. - */ -#ifndef __ASM_MACH_RM200_MC146818RTC_H -#define __ASM_MACH_RM200_MC146818RTC_H - -#define mc146818_decode_year(year) ((year) + 1980) - -#include_next - -#endif /* __ASM_MACH_RM200_MC146818RTC_H */ diff --git a/include/asm-mips/mach-rm200/timex.h b/include/asm-mips/mach-rm200/timex.h deleted file mode 100644 index 11ff6cb0f21..00000000000 --- a/include/asm-mips/mach-rm200/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2005 by Ralf Baechle - */ -#ifndef __ASM_MACH_RM200_TIMEX_H -#define __ASM_MACH_RM200_TIMEX_H - -#define CLOCK_TICK_RATE 1193182 - -#endif /* __ASM_MACH_RM200_TIMEX_H */ diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h index 3ac146c019c..13a3502eef4 100644 --- a/include/asm-mips/war.h +++ b/include/asm-mips/war.h @@ -76,7 +76,7 @@ /* * But the RM200C seems to have been shipped only with V2.0 R4600s */ -#ifdef CONFIG_SNI_RM200_PCI +#ifdef CONFIG_SNI_RM #define R4600_V2_HIT_CACHEOP_WAR 1 -- cgit v1.2.3 From f0647a52974daccbe20990fb6341f07792445fe0 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Fri, 8 Dec 2006 11:40:35 +0300 Subject: [PATCH] add STB810 support (Philips PNX8550-based) Signed-off-by: Vitaly Wool Signed-off-by: Ralf Baechle --- include/asm-mips/bootinfo.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index 1e5ccdad3b0..8e321f53a38 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -131,6 +131,7 @@ #define MACH_PHILIPS_NINO 0 /* Nino */ #define MACH_PHILIPS_VELO 1 /* Velo */ #define MACH_PHILIPS_JBS 2 /* JBS */ +#define MACH_PHILIPS_STB810 3 /* STB810 */ /* * Valid machtype for group SIBYTE -- cgit v1.2.3 From 3644f0cee77494190452de132e82245107939284 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 7 Dec 2006 15:08:17 -0800 Subject: [NET]: Convert hh_lock to seqlock. The hard header cache is in the main output path, so using seqlock instead of reader/writer lock should reduce overhead. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- include/net/neighbour.h | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c57088f575a..631cec4ff5e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -199,7 +199,7 @@ struct hh_cache */ u16 hh_len; /* length of header */ int (*hh_output)(struct sk_buff *skb); - rwlock_t hh_lock; + seqlock_t hh_lock; /* cached hardware header; allow for machine alignment needs. */ #define HH_DATA_MOD 16 diff --git a/include/net/neighbour.h b/include/net/neighbour.h index 23967031ddb..3725b93c52f 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -309,6 +309,24 @@ static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb) return 0; } +static inline int neigh_hh_output(struct hh_cache *hh, struct sk_buff *skb) +{ + unsigned seq; + int hh_len; + + do { + int hh_alen; + + seq = read_seqbegin(&hh->hh_lock); + hh_len = hh->hh_len; + hh_alen = HH_DATA_ALIGN(hh_len); + memcpy(skb->data - hh_alen, hh->hh_data, hh_alen); + } while (read_seqretry(&hh->hh_lock, seq)); + + skb_push(skb, hh_len); + return hh->hh_output(skb); +} + static inline struct neighbour * __neigh_lookup(struct neigh_table *tbl, const void *pkey, struct net_device *dev, int creat) { -- cgit v1.2.3 From e8cc49bb0fdb9e18a99e6780073d1400ba2b0d1f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 7 Dec 2006 15:43:13 -0800 Subject: [AX.25]: Constify ax25 utility functions Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/ax25.h | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/net/ax25.h b/include/net/ax25.h index 69374cd1a85..41acb093caa 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -283,14 +283,16 @@ extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *); /* ax25_addr.c */ extern ax25_address null_ax25_address; -extern char *ax2asc(char *buf, ax25_address *); -extern void asc2ax(ax25_address *addr, char *callsign); -extern int ax25cmp(ax25_address *, ax25_address *); -extern int ax25digicmp(ax25_digi *, ax25_digi *); -extern unsigned char *ax25_addr_parse(unsigned char *, int, ax25_address *, ax25_address *, ax25_digi *, int *, int *); -extern int ax25_addr_build(unsigned char *, ax25_address *, ax25_address *, ax25_digi *, int, int); -extern int ax25_addr_size(ax25_digi *); -extern void ax25_digi_invert(ax25_digi *, ax25_digi *); +extern char *ax2asc(char *buf, const ax25_address *); +extern void asc2ax(ax25_address *addr, const char *callsign); +extern int ax25cmp(const ax25_address *, const ax25_address *); +extern int ax25digicmp(const ax25_digi *, const ax25_digi *); +extern const unsigned char *ax25_addr_parse(const unsigned char *, int, + ax25_address *, ax25_address *, ax25_digi *, int *, int *); +extern int ax25_addr_build(unsigned char *, const ax25_address *, + const ax25_address *, const ax25_digi *, int, int); +extern int ax25_addr_size(const ax25_digi *); +extern void ax25_digi_invert(const ax25_digi *, ax25_digi *); /* ax25_dev.c */ extern ax25_dev *ax25_dev_list; -- cgit v1.2.3 From 15b1c0e822f578306332d4f4c449250db5c5dceb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 7 Dec 2006 15:47:08 -0800 Subject: [AX.25]: Fix default address and broadcast address initialization. Only the callsign but not the SSID part of an AX.25 address is ASCII based but Linux by initializes the SSID which should be just a 4-bit number from ASCII anyway. Fix that and convert the code to use a shared constant for both default addresses. While at it, use the same style for null_ax25_address also. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/ax25.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/ax25.h b/include/net/ax25.h index 41acb093caa..e1d116f1192 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -282,9 +282,9 @@ extern void ax25_fillin_cb(ax25_cb *, ax25_dev *); extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *); /* ax25_addr.c */ -extern ax25_address null_ax25_address; -extern char *ax2asc(char *buf, const ax25_address *); -extern void asc2ax(ax25_address *addr, const char *callsign); +extern const ax25_address ax25_bcast; +extern const ax25_address ax25_defaddr; +extern const ax25_address null_ax25_address; extern int ax25cmp(const ax25_address *, const ax25_address *); extern int ax25digicmp(const ax25_digi *, const ax25_digi *); extern const unsigned char *ax25_addr_parse(const unsigned char *, int, -- cgit v1.2.3 From e07bca84cd9d31f76ed655d51e68b6a0ca15f162 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Thu, 7 Dec 2006 23:49:45 -0800 Subject: [NETLINK]: Restore API compatibility of address and neighbour bits Restore API compatibility due to bits moved from rtnetlink.h to separate headers. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- include/linux/rtnetlink.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 493297acdae..4a629ea70cc 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -3,6 +3,8 @@ #include #include +#include +#include /**** * Routing/neighbour discovery messages. -- cgit v1.2.3 From f0490980a152958d25ce9762bfb296d8fd4c5512 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 8 Dec 2006 00:08:43 -0800 Subject: [NET]: Force a cache line split in hh_cache in SMP. hh_lock was converted from rwlock to seqlock by Stephen. To have a 100% benefit of this change, I suggest to place read mostly fields of hh_cache in a separate cache line, because hh_refcnt may be changed quite frequently on some busy machines. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 631cec4ff5e..6be767c76b3 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -193,7 +193,14 @@ struct hh_cache { struct hh_cache *hh_next; /* Next entry */ atomic_t hh_refcnt; /* number of users */ - __be16 hh_type; /* protocol identifier, f.e ETH_P_IP +/* + * We want hh_output, hh_len, hh_lock and hh_data be a in a separate + * cache line on SMP. + * They are mostly read, but hh_refcnt may be changed quite frequently, + * incurring cache line ping pongs. + */ + __be16 hh_type ____cacheline_aligned_in_smp; + /* protocol identifier, f.e ETH_P_IP * NOTE: For VLANs, this will be the * encapuslated type. --BLG */ -- cgit v1.2.3 From 93366c537b3426261cac4db27acc10a99cd91b06 Mon Sep 17 00:00:00 2001 From: J Hadi Salim Date: Fri, 8 Dec 2006 00:12:15 -0800 Subject: [XFRM]: Fix XFRMGRP_REPORT to use correct multicast group. XFRMGRP_REPORT uses 0x10 which is a group that belongs to events. The correct value is 0x20. We should really be using xfrm_nlgroups going forward; it was tempting to delete the definition of XFRMGRP_REPORT but it would break at least iproute2. Signed-off-by: J Hadi Salim Signed-off-by: David S. Miller --- include/linux/xfrm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 088ba8113f7..9529ea1ae39 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -357,7 +357,7 @@ struct xfrm_user_report { #define XFRMGRP_EXPIRE 2 #define XFRMGRP_SA 4 #define XFRMGRP_POLICY 8 -#define XFRMGRP_REPORT 0x10 +#define XFRMGRP_REPORT 0x20 #endif enum xfrm_nlgroups { -- cgit v1.2.3 From d3dcc077bf88806201093f86325ec656e4dbfbce Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 8 Dec 2006 17:05:13 -0800 Subject: [NETLINK]: Put {IFA,IFLA}_{RTA,PAYLOAD} macros back for userspace. GLIBC uses them etc. They are guarded by ifndef __KERNEL__ so nobody will start accidently using them in the kernel again, it's just for userspace. Signed-off-by: David S. Miller --- include/linux/if_addr.h | 6 ++++++ include/linux/if_link.h | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h index dbe8f6120a4..d557e4ce9b6 100644 --- a/include/linux/if_addr.h +++ b/include/linux/if_addr.h @@ -52,4 +52,10 @@ struct ifa_cacheinfo __u32 tstamp; /* updated timestamp, hundredths of seconds */ }; +/* backwards compatibility for userspace */ +#ifndef __KERNEL__ +#define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg)))) +#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg)) +#endif + #endif diff --git a/include/linux/if_link.h b/include/linux/if_link.h index e963a077e6f..35ed3b5467f 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -82,6 +82,12 @@ enum #define IFLA_MAX (__IFLA_MAX - 1) +/* backwards compatibility for userspace */ +#ifndef __KERNEL__ +#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) +#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) +#endif + /* ifi_flags. IFF_* flags. -- cgit v1.2.3 From bca0b8e75f6b7cf52cf52c967286b72d84f9b37e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 9 Dec 2006 16:41:55 +0000 Subject: [ARM] Add sys_*at syscalls Later glibc requires the *at syscalls. Add them. Signed-off-by: Russell King --- include/asm-arm/unistd.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include') diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index d44c629d842..32b06eb5281 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -347,6 +347,19 @@ #define __NR_mbind (__NR_SYSCALL_BASE+319) #define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) #define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) +#define __NR_openat (__NR_SYSCALL_BASE+322) +#define __NR_mkdirat (__NR_SYSCALL_BASE+323) +#define __NR_mknodat (__NR_SYSCALL_BASE+324) +#define __NR_fchownat (__NR_SYSCALL_BASE+325) +#define __NR_futimesat (__NR_SYSCALL_BASE+326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) +#define __NR_unlinkat (__NR_SYSCALL_BASE+328) +#define __NR_renameat (__NR_SYSCALL_BASE+329) +#define __NR_linkat (__NR_SYSCALL_BASE+330) +#define __NR_symlinkat (__NR_SYSCALL_BASE+331) +#define __NR_readlinkat (__NR_SYSCALL_BASE+332) +#define __NR_fchmodat (__NR_SYSCALL_BASE+333) +#define __NR_faccessat (__NR_SYSCALL_BASE+334) /* * The following SWIs are ARM private. -- cgit v1.2.3 From a3a79bd7c75f0055df16540c7e9dbe270060ebe8 Mon Sep 17 00:00:00 2001 From: Sam Creasey Date: Sat, 9 Dec 2006 10:34:38 +0100 Subject: [PATCH] Sun3: General updates General compile fixes for 2.6.16 for sun3, and some updates to make the new bootloader work correctly. Tested on 3/50, 3/60, 3/80. Signed-off-by: Sam Creasey Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- include/asm-m68k/sun3-head.h | 1 - include/asm-m68k/sun3ints.h | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-m68k/sun3-head.h b/include/asm-m68k/sun3-head.h index f799d95bad5..e74f384e269 100644 --- a/include/asm-m68k/sun3-head.h +++ b/include/asm-m68k/sun3-head.h @@ -4,7 +4,6 @@ #define KERNBASE 0xE000000 /* First address the kernel will eventually be */ #define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */ -#define BI_START (KERNBASE + 0x3000) /* beginning of the bootinfo records */ #define FC_CONTROL 3 #define FC_SUPERD 5 #define FC_CPU 7 diff --git a/include/asm-m68k/sun3ints.h b/include/asm-m68k/sun3ints.h index de91fa071b9..309d6e6a137 100644 --- a/include/asm-m68k/sun3ints.h +++ b/include/asm-m68k/sun3ints.h @@ -16,6 +16,7 @@ #include #include #include +#include #define SUN3_INT_VECS 192 -- cgit v1.2.3 From 10e267234cc0133bc9ed26bc34eb09de90c248c0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Nov 2006 13:38:57 -0800 Subject: [SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller --- include/asm-sparc64/irqflags.h | 89 ++++++++++++++++++++++++++++++++++++++++++ include/asm-sparc64/rwsem.h | 32 +++++++++++---- include/asm-sparc64/system.h | 49 ++--------------------- include/asm-sparc64/ttable.h | 45 ++++++++++++++++++++- 4 files changed, 160 insertions(+), 55 deletions(-) create mode 100644 include/asm-sparc64/irqflags.h (limited to 'include') diff --git a/include/asm-sparc64/irqflags.h b/include/asm-sparc64/irqflags.h new file mode 100644 index 00000000000..024fc54d068 --- /dev/null +++ b/include/asm-sparc64/irqflags.h @@ -0,0 +1,89 @@ +/* + * include/asm-sparc64/irqflags.h + * + * IRQ flags handling + * + * This file gets included from lowlevel asm headers too, to provide + * wrapped versions of the local_irq_*() APIs, based on the + * raw_local_irq_*() functions from the lowlevel headers. + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__( + "rdpr %%pil, %0" + : "=r" (flags) + ); + + return flags; +} + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + __asm__ __volatile__( + "wrpr %0, %%pil" + : /* no output */ + : "r" (flags) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + __asm__ __volatile__( + "wrpr 15, %%pil" + : /* no outputs */ + : /* no inputs */ + : "memory" + ); +} + +static inline void raw_local_irq_enable(void) +{ + __asm__ __volatile__( + "wrpr 0, %%pil" + : /* no outputs */ + : /* no inputs */ + : "memory" + ); +} + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags > 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +/* + * For spinlocks, etc: + */ +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags = __raw_local_save_flags(); + + raw_local_irq_disable(); + + return flags; +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +#endif /* (__ASSEMBLY__) */ + +#endif /* !(_ASM_IRQFLAGS_H) */ diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h index cef5e827042..1294b7ce5d0 100644 --- a/include/asm-sparc64/rwsem.h +++ b/include/asm-sparc64/rwsem.h @@ -23,20 +23,33 @@ struct rw_semaphore { signed int count; spinlock_t wait_lock; struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif }; +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + #define __RWSEM_INITIALIZER(name) \ -{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) } +{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } #define DECLARE_RWSEM(name) \ struct rw_semaphore name = __RWSEM_INITIALIZER(name) -static __inline__ void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) extern void __down_read(struct rw_semaphore *sem); extern int __down_read_trylock(struct rw_semaphore *sem); @@ -46,6 +59,11 @@ extern void __up_read(struct rw_semaphore *sem); extern void __up_write(struct rw_semaphore *sem); extern void __downgrade_write(struct rw_semaphore *sem); +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) { return atomic_add_return(delta, (atomic_t *)(&sem->count)); diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h index a8b7432c9a7..32281acb878 100644 --- a/include/asm-sparc64/system.h +++ b/include/asm-sparc64/system.h @@ -7,6 +7,9 @@ #include #ifndef __ASSEMBLY__ + +#include + /* * Sparc (general) CPU types */ @@ -72,52 +75,6 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ #endif -#define setipl(__new_ipl) \ - __asm__ __volatile__("wrpr %0, %%pil" : : "r" (__new_ipl) : "memory") - -#define local_irq_disable() \ - __asm__ __volatile__("wrpr 15, %%pil" : : : "memory") - -#define local_irq_enable() \ - __asm__ __volatile__("wrpr 0, %%pil" : : : "memory") - -#define getipl() \ -({ unsigned long retval; __asm__ __volatile__("rdpr %%pil, %0" : "=r" (retval)); retval; }) - -#define swap_pil(__new_pil) \ -({ unsigned long retval; \ - __asm__ __volatile__("rdpr %%pil, %0\n\t" \ - "wrpr %1, %%pil" \ - : "=&r" (retval) \ - : "r" (__new_pil) \ - : "memory"); \ - retval; \ -}) - -#define read_pil_and_cli() \ -({ unsigned long retval; \ - __asm__ __volatile__("rdpr %%pil, %0\n\t" \ - "wrpr 15, %%pil" \ - : "=r" (retval) \ - : : "memory"); \ - retval; \ -}) - -#define local_save_flags(flags) ((flags) = getipl()) -#define local_irq_save(flags) ((flags) = read_pil_and_cli()) -#define local_irq_restore(flags) setipl((flags)) - -/* On sparc64 IRQ flags are the PIL register. A value of zero - * means all interrupt levels are enabled, any other value means - * only IRQ levels greater than that value will be received. - * Consequently this means that the lowest IRQ level is one. - */ -#define irqs_disabled() \ -({ unsigned long flags; \ - local_save_flags(flags);\ - (flags > 0); \ -}) - #define nop() __asm__ __volatile__ ("nop") #define read_barrier_depends() do { } while(0) diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h index f2352606a79..c2a16e18849 100644 --- a/include/asm-sparc64/ttable.h +++ b/include/asm-sparc64/ttable.h @@ -137,10 +137,49 @@ #endif #define BREAKPOINT_TRAP TRAP(breakpoint_trap) +#ifdef CONFIG_TRACE_IRQFLAGS + +#define TRAP_IRQ(routine, level) \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + sethi %hi(1f-4), %g7; \ + ba,pt %xcc, etrap_irq; \ + or %g7, %lo(1f-4), %g7; \ + nop; \ + nop; \ + nop; \ + .subsection 2; \ +1: call trace_hardirqs_off; \ + nop; \ + mov level, %o0; \ + call routine; \ + add %sp, PTREGS_OFF, %o1; \ + ba,a,pt %xcc, rtrap_irq; \ + .previous; + +#define TICK_SMP_IRQ \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + sethi %hi(1f-4), %g7; \ + ba,pt %xcc, etrap_irq; \ + or %g7, %lo(1f-4), %g7; \ + nop; \ + nop; \ + nop; \ + .subsection 2; \ +1: call trace_hardirqs_off; \ + nop; \ + call smp_percpu_timer_interrupt; \ + add %sp, PTREGS_OFF, %o0; \ + ba,a,pt %xcc, rtrap_irq; \ + .previous; + +#else + #define TRAP_IRQ(routine, level) \ rdpr %pil, %g2; \ wrpr %g0, 15, %pil; \ - b,pt %xcc, etrap_irq; \ + ba,pt %xcc, etrap_irq; \ rd %pc, %g7; \ mov level, %o0; \ call routine; \ @@ -151,12 +190,14 @@ rdpr %pil, %g2; \ wrpr %g0, 15, %pil; \ sethi %hi(109f), %g7; \ - b,pt %xcc, etrap_irq; \ + ba,pt %xcc, etrap_irq; \ 109: or %g7, %lo(109b), %g7; \ call smp_percpu_timer_interrupt; \ add %sp, PTREGS_OFF, %o0; \ ba,a,pt %xcc, rtrap_irq; +#endif + #define TRAP_IVEC TRAP_NOSAVE(do_ivec) #define BTRAP(lvl) TRAP_ARG(bad_trap, lvl) -- cgit v1.2.3 From 5ff42459af99427a393e3b576a77a900d43e730a Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Fri, 1 Dec 2006 20:19:59 -0800 Subject: [SPARC64]: dma remove extra brackets Signed-off-by: Mariusz Kozlowski Signed-off-by: David S. Miller --- include/asm-sparc64/dma.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h index 27f65972b3b..93e5a062df8 100644 --- a/include/asm-sparc64/dma.h +++ b/include/asm-sparc64/dma.h @@ -152,9 +152,9 @@ extern void dvma_init(struct sbus_bus *); #define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) /* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) (((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) -#define DMA_WRITE_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE)) +#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR)) +#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)) +#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE)) #define DMA_OFF(__regs) \ do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ tmp &= ~DMA_ENABLE; \ -- cgit v1.2.3 From f0882589666440d573f657cb3a1d5f66f3caa157 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 10 Dec 2006 02:42:03 -0800 Subject: [SPARC64]: Fix several kprobes bugs. - relbranch_fixup(), for non-branches, would end up setting regs->tnpc incorrectly, in fact it would set it equal to regs->tpc which would cause that instruction to execute twice Also, if this is not a PC-relative branch, we should just leave regs->tnpc as-is. This covers cases like 'jmpl' which branch to absolute values. - To be absolutely %100 safe, we need to flush the instruction cache for all assignments to kprobe->ainsn.insn[], including cases like add_aggr_kprobe() - prev_kprobe's status field needs to be 'unsigned long' to match the type of the value it is saving - jprobes were totally broken: = jprobe_return() can run in the stack frame of the jprobe handler, or in an even deeper stack frame, thus we'll be in the wrong register window than the one from the original probe state. So unwind using 'restore' instructions, if necessary, right before we do the jprobe_return() breakpoint trap. = There is no reason to save/restore the register window saved at %sp at jprobe trigger time. Those registers cannot be modified by the jprobe handler. Also, this code was saving and restoring "sizeof (struct sparc_stackf)" bytes. Depending upon the caller, this could clobber unrelated stack frame pieces if there is only a basic 128-byte register window stored on the stack, without the argument save area. So just saving and restoring struct pt_regs is sufficient. = Kill the "jprobe_saved_esp", totally unused. Also, delete "jprobe_saved_regs_location", with the stack frame unwind now done explicitly by jprobe_return(), this check is superfluous. Signed-off-by: David S. Miller --- include/asm-sparc64/kprobes.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h index c9f5c34d318..becc38fa06c 100644 --- a/include/asm-sparc64/kprobes.h +++ b/include/asm-sparc64/kprobes.h @@ -13,7 +13,11 @@ typedef u32 kprobe_opcode_t; #define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry #define arch_remove_kprobe(p) do {} while (0) #define ARCH_INACTIVE_KPROBE_COUNT 0 -#define flush_insn_slot(p) do { } while (0) + +#define flush_insn_slot(p) \ +do { flushi(&(p)->ainsn.insn[0]); \ + flushi(&(p)->ainsn.insn[1]); \ +} while (0) /* Architecture specific copy of original instruction*/ struct arch_specific_insn { @@ -23,7 +27,7 @@ struct arch_specific_insn { struct prev_kprobe { struct kprobe *kp; - unsigned int status; + unsigned long status; unsigned long orig_tnpc; unsigned long orig_tstate_pil; }; @@ -33,10 +37,7 @@ struct kprobe_ctlblk { unsigned long kprobe_status; unsigned long kprobe_orig_tnpc; unsigned long kprobe_orig_tstate_pil; - long *jprobe_saved_esp; struct pt_regs jprobe_saved_regs; - struct pt_regs *jprobe_saved_regs_location; - struct sparc_stackf jprobe_saved_stack; struct prev_kprobe prev_kprobe; }; -- cgit v1.2.3 From 9c4dfadbde3cfa78b92c28597125b8c41d36ffd0 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Sat, 4 Nov 2006 09:22:27 -0300 Subject: V4L/DVB (4796): A couple of V4L2 defines needed by Cafe Camara driver Two defines for V4L2, needed by the Cafe camera driver: 1) Add the RGB444 image format 2) Add the "init" internal command which is separate from "reset". Signed-off-by: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 1 + include/media/v4l2-common.h | 4 ++++ 2 files changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index df5c4654360..5cb380a559f 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -244,6 +244,7 @@ struct v4l2_pix_format #define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y','Y','U','V') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_HI240 v4l2_fourcc('H','I','2','4') /* 8 8-bit color */ #define V4L2_PIX_FMT_HM12 v4l2_fourcc('H','M','1','2') /* 8 YUV 4:2:0 16x16 macroblocks */ +#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R','4','4','4') /* 16 xxxxrrrr ggggbbbb */ /* see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B','A','8','1') /* 8 BGBG.. GRGR.. */ diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index aecc946980a..8263ea00ca6 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -251,4 +251,8 @@ struct v4l2_crystal_freq { If the frequency is not supported, then -EINVAL is returned. */ #define VIDIOC_INT_S_CRYSTAL_FREQ _IOW ('d', 113, struct v4l2_crystal_freq) +/* Initialize the sensor registors to some sort of reasonable + default values. */ +#define VIDIOC_INT_INIT _IOW ('d', 114, u32) + #endif /* V4L2_COMMON_H_ */ -- cgit v1.2.3 From d905b382d797a213e15868cbf3204f50ed52e30b Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Sat, 4 Nov 2006 09:25:53 -0300 Subject: V4L/DVB (4797): Marvell 88ALP01 "cafe" driver A driver for the Marvell M88ALP01 "CAFE" CMOS integrated camera controller. This driver has been renamed "cafe_ccic" since my previous patch set. Signed-off-by: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c-id.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 0a8f750cbed..a32db163cbc 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -250,6 +250,7 @@ #define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ #define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */ #define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */ +#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ /* --- ISA pseudo-adapter */ #define I2C_HW_ISA 0x050000 -- cgit v1.2.3 From 111f33564e19b2b5f70e3df9a8f92c08c1c91fd9 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Sat, 4 Nov 2006 09:26:00 -0300 Subject: V4L/DVB (4798): OmniVision OV7670 driver This patch adds a V4L2 driver for the OmniVision OV7670 camera. Signed-off-by: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c-id.h | 1 + include/media/v4l2-common.h | 3 +++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index a32db163cbc..0f4cf34b6fa 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -159,6 +159,7 @@ #define I2C_DRIVERID_ASB100 1043 #define I2C_DRIVERID_FSCHER 1046 #define I2C_DRIVERID_W83L785TS 1047 +#define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */ /* * ---- Adapter types ---------------------------------------------------- diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 8263ea00ca6..91b19921f95 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -144,6 +144,9 @@ enum v4l2_chip_ident { V4L2_IDENT_CX25841 = 241, V4L2_IDENT_CX25842 = 242, V4L2_IDENT_CX25843 = 243, + + /* OmniVision sensors - range 250-299 */ + V4L2_IDENT_OV7670 = 250, }; /* audio ioctls */ -- cgit v1.2.3 From f2520106e78b250c2c4662608cb8db1169932a2d Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 12 Nov 2006 09:28:46 -0300 Subject: V4L/DVB (4812): Detect presence of IR receiver/IR transmitter in tveeprom Thanks to input from Steven Toth from Hauppauge the tveeprom module has been extended to detect the presence of an IR transmitter (aka IR-blaster). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/tveeprom.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h index e9fc1a78549..5660ea24996 100644 --- a/include/media/tveeprom.h +++ b/include/media/tveeprom.h @@ -3,7 +3,7 @@ struct tveeprom { u32 has_radio; - u32 has_ir; /* 0: no IR, 1: IR present, 2: unknown */ + u32 has_ir; /* bit 0: IR receiver present, bit 1: IR transmitter (blaster) present. -1 == unknown */ u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */ u32 tuner_type; -- cgit v1.2.3 From e75f9cee32827853fc2f9d1ceb6352e3edc33e9d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 20 Nov 2006 13:19:20 -0300 Subject: V4L/DVB (4861): Remove the need of a STD array for drivers using video_ioctl2 video_ioctl2 will auto-generate standard entries at ENUM_FMT. Also, now, a driver may return a subset of the video array at the return, to be stored as the current_norm. For example, a driver may ask for V4L2_STD_PAL. At return, driver may change it to V4L2_STD_PAL_B. This way, a futher call to G_STD will return the exact detected video std. Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-dev.h | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 6a11d772700..fb96472a1bd 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -43,6 +43,7 @@ /* Video standard functions */ extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs); +extern char *v4l2_norm_to_name(v4l2_std_id id); extern int v4l2_video_std_construct(struct v4l2_standard *vs, int id, char *name); @@ -81,12 +82,6 @@ extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd, * This version moves redundant code from video device code to * the common handler */ -struct v4l2_tvnorm { - char *name; - v4l2_std_id id; - - void *priv_data; -}; struct video_device { @@ -104,9 +99,8 @@ struct video_device int debug; /* Activates debug level*/ /* Video standard vars */ - int tvnormsize; /* Size of tvnorm array */ - v4l2_std_id current_norm; /* Current tvnorm */ - struct v4l2_tvnorm *tvnorms; + v4l2_std_id tvnorms; /* Supported tv norms */ + v4l2_std_id current_norm; /* Current tvnorm */ /* callbacks */ void (*release)(struct video_device *vfd); @@ -211,7 +205,7 @@ struct video_device /* Standard handling G_STD and ENUMSTD are handled by videodev.c */ - int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id a); + int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm); int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a); /* Input handling */ -- cgit v1.2.3 From 2520fffd8b7a312e77009414d3201c9751d6448c Mon Sep 17 00:00:00 2001 From: David Hardeman Date: Sat, 2 Dec 2006 21:16:05 -0200 Subject: V4L/DVB (4879): budget-ci IR: integrate with ir-common This converts the budget-ci driver so that it uses ir-common for some of its IR processing. In particular, the keymap for the Nova-T (sub 13c2:1011) is switched to the Hauppauge grey/black keymap, of which the keys on the supplied R808 remote control form a subset. The old budget-ci keymap is moved to ir-keymaps.c and is used for other remotes. The debounce logic for buggy remotes (i.e. Zenith) is made conditional the new debounce parameter and defaults to off (so that repeat keypresses aren't ignored for all working remotes). Some parts are based on Darren Salt's dvb-ir patchset. Signed-off-by: David Hardeman Signed-off-by: Andrew de Quincey Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-common.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 8f58406533c..2b25f5c9500 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -92,6 +92,7 @@ extern IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_npgtech[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_norwood[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_proteus_2309[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE]; #endif -- cgit v1.2.3 From 88bbdf74fcfa7ed1fd1a3c825ee5575752344326 Mon Sep 17 00:00:00 2001 From: Hartmut Birr Date: Wed, 1 Nov 2006 12:46:32 -0300 Subject: V4L/DVB (4914): Saa7146: Protect access to the IER register by a spinlock Protect the access to the IER register of the SAA7146 by the device spinlock. I2C transfers may use interrupt mode now. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab --- include/media/saa7146.h | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/media/saa7146.h b/include/media/saa7146.h index fee579f10b3..afa5ff6469b 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -42,10 +42,20 @@ extern unsigned int saa7146_debug; #define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */ #define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */ -#define SAA7146_IER_DISABLE(x,y) \ - saa7146_write(x, IER, saa7146_read(x, IER) & ~(y)); -#define SAA7146_IER_ENABLE(x,y) \ - saa7146_write(x, IER, saa7146_read(x, IER) | (y)); +#define SAA7146_IER_DISABLE(x,y) \ + do { \ + unsigned int flags; \ + spin_lock_irqsave(&x->int_slock, flags); \ + saa7146_write(x, IER, saa7146_read(x, IER) & ~(y)); \ + spin_unlock_irqrestore(&x->int_slock, flags); \ + } while(0) +#define SAA7146_IER_ENABLE(x,y) \ + do { \ + unsigned int flags; \ + spin_lock_irqsave(&x->int_slock, flags); \ + saa7146_write(x, IER, saa7146_read(x, IER) | (y)); \ + spin_unlock_irqrestore(&x->int_slock, flags); \ + } while(0) #define SAA7146_ISR_CLEAR(x,y) \ saa7146_write(x, ISR, (y)); -- cgit v1.2.3 From 4207700d9b238c2db1bcba47a23251c6024687b6 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Fri, 3 Nov 2006 15:13:52 -0300 Subject: V4L/DVB (4917): Saa7146: Convert SAA7146_IER_{DIS,EN}ABLE macros to inline functions Convert SAA7146_IER_{DIS,EN}ABLE macros to inline functions. Fixes a problem with macro expansion (reported by C.Y.M). Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab --- include/media/saa7146.h | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/media/saa7146.h b/include/media/saa7146.h index afa5ff6469b..796bcf151a3 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -42,20 +42,6 @@ extern unsigned int saa7146_debug; #define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */ #define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */ -#define SAA7146_IER_DISABLE(x,y) \ - do { \ - unsigned int flags; \ - spin_lock_irqsave(&x->int_slock, flags); \ - saa7146_write(x, IER, saa7146_read(x, IER) & ~(y)); \ - spin_unlock_irqrestore(&x->int_slock, flags); \ - } while(0) -#define SAA7146_IER_ENABLE(x,y) \ - do { \ - unsigned int flags; \ - spin_lock_irqsave(&x->int_slock, flags); \ - saa7146_write(x, IER, saa7146_read(x, IER) | (y)); \ - spin_unlock_irqrestore(&x->int_slock, flags); \ - } while(0) #define SAA7146_ISR_CLEAR(x,y) \ saa7146_write(x, ISR, (y)); @@ -451,4 +437,20 @@ int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop); #define SAA7146_I2C_BUS_BIT_RATE_80 (0x200) #define SAA7146_I2C_BUS_BIT_RATE_60 (0x300) +static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) & ~y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + +static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) | y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + #endif -- cgit v1.2.3 From cefccc8011c58b559498396f0ccefa0a0ffa3f53 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 4 Dec 2006 08:31:35 -0300 Subject: V4L/DVB (4934): Usbvision radio requires GainNormal at e register Adds an option to select GainNormal at tda9887 and make usbvision to use it. Signed-off-by: Mauro Carvalho Chehab --- include/media/tuner.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/media/tuner.h b/include/media/tuner.h index 3116e750132..99acf847365 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -145,6 +145,7 @@ extern int tuner_debug; #define TDA9887_DEEMPHASIS_75 (3<<16) #define TDA9887_AUTOMUTE (1<<18) #define TDA9887_GATING_18 (1<<19) +#define TDA9887_GAIN_NORMAL (1<<20) #ifdef __KERNEL__ -- cgit v1.2.3 From 483deb0f2b38060c1f2de216c09f05b1869b0d52 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 4 Dec 2006 08:31:38 -0300 Subject: V4L/DVB (4935): Added the capability of selecting fm gain by tuner Some tuners require using cGainNormal instead of cGainLow for high sensibility on FM reception. Signed-off-by: Mauro Carvalho Chehab --- include/media/tuner-types.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h index 37dad07a843..e5ad3fcfe98 100644 --- a/include/media/tuner-types.h +++ b/include/media/tuner-types.h @@ -50,6 +50,10 @@ struct tuner_params { sensitivity. If this setting is 1, then set PORT2 to 1 to get proper FM reception. */ unsigned int port2_fm_high_sensitivity:1; + /* Some Philips tuners use tda9887 cGainNormal to select the FM radio + sensitivity. If this setting is 1, e register will use cGainNormal + instead of cGainLow. */ + unsigned int fm_gain_normal:1; /* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners use Intercarrier mode. If this setting is 1, then the tuner needs to be set to intercarrier mode. */ -- cgit v1.2.3 From fd43fe19b830d6cd0eba08a6c6a5f71a6bd9c1b0 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 10 Dec 2006 02:18:47 -0800 Subject: [PATCH] xtensa: fix irq and misc fixes Update the architecture specific interrupt handling code for Xtensa to support the new API. Use generic BUG macros in bug.h, and some minor fixes. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-xtensa/bug.h | 25 +------------------------ include/asm-xtensa/byteorder.h | 4 ++-- include/asm-xtensa/irq_regs.h | 1 + include/asm-xtensa/unistd.h | 3 +++ include/asm-xtensa/xtensa/config-linux_be/tie.h | 2 +- 5 files changed, 8 insertions(+), 27 deletions(-) create mode 100644 include/asm-xtensa/irq_regs.h (limited to 'include') diff --git a/include/asm-xtensa/bug.h b/include/asm-xtensa/bug.h index 56703659b20..3e52d72712f 100644 --- a/include/asm-xtensa/bug.h +++ b/include/asm-xtensa/bug.h @@ -13,29 +13,6 @@ #ifndef _XTENSA_BUG_H #define _XTENSA_BUG_H -#include - -#define ILL __asm__ __volatile__ (".byte 0,0,0\n") - -#ifdef CONFIG_KALLSYMS -# define BUG() do { \ - printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ - ILL; \ -} while (0) -#else -# define BUG() do { \ - printk("kernel BUG!\n"); \ - ILL; \ -} while (0) -#endif - -#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) -#define PAGE_BUG(page) do { BUG(); } while (0) -#define WARN_ON(condition) do { \ - if (unlikely((condition)!=0)) { \ - printk ("Warning in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \ - dump_stack(); \ - } \ -} while (0) +#include #endif /* _XTENSA_BUG_H */ diff --git a/include/asm-xtensa/byteorder.h b/include/asm-xtensa/byteorder.h index 0b1552569aa..0ba72ddbf88 100644 --- a/include/asm-xtensa/byteorder.h +++ b/include/asm-xtensa/byteorder.h @@ -14,7 +14,7 @@ #include #include -static __inline__ __const__ __u32 ___arch__swab32(__u32 x) +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) { __u32 res; /* instruction sequence from Xtensa ISA release 2/2000 */ @@ -29,7 +29,7 @@ static __inline__ __const__ __u32 ___arch__swab32(__u32 x) return res; } -static __inline__ __const__ __u16 ___arch__swab16(__u16 x) +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) { /* Given that 'short' values are signed (i.e., can be negative), * we cannot assume that the upper 16-bits of the register are diff --git a/include/asm-xtensa/irq_regs.h b/include/asm-xtensa/irq_regs.h new file mode 100644 index 00000000000..3dd9c0b7027 --- /dev/null +++ b/include/asm-xtensa/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h index 2e1a1b997e7..15b0932523d 100644 --- a/include/asm-xtensa/unistd.h +++ b/include/asm-xtensa/unistd.h @@ -218,6 +218,8 @@ #define SYSXTENSA_COUNT 5 /* count of syscall0 functions*/ +#ifdef __KERNEL__ + /* * "Conditional" syscalls * @@ -230,6 +232,7 @@ #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_RT_SIGACTION + #endif /* __KERNEL__ */ #endif /* _XTENSA_UNISTD_H */ diff --git a/include/asm-xtensa/xtensa/config-linux_be/tie.h b/include/asm-xtensa/xtensa/config-linux_be/tie.h index 3c2e514602f..07c6d1ca458 100644 --- a/include/asm-xtensa/xtensa/config-linux_be/tie.h +++ b/include/asm-xtensa/xtensa/config-linux_be/tie.h @@ -115,7 +115,7 @@ /* ... */ -#ifdef _ASMLANGUAGE +#ifdef __ASSEMBLER__ /* * Assembly-language specific definitions (assembly macros, etc.). */ -- cgit v1.2.3 From 173d6681380aa1d60dfc35ed7178bd7811ba2784 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 10 Dec 2006 02:18:48 -0800 Subject: [PATCH] xtensa: remove extra header files The Xtensa port contained many header files that were never needed. This rather lengthy patch removes all those files. Unfortunately, there were many dependencies that needed to be updated, so this patch touches quite a few source files. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-xtensa/asmmacro.h | 153 +++ include/asm-xtensa/byteorder.h | 1 - include/asm-xtensa/cache.h | 20 +- include/asm-xtensa/cacheasm.h | 177 +++ include/asm-xtensa/cacheflush.h | 2 +- include/asm-xtensa/checksum.h | 2 +- include/asm-xtensa/coprocessor.h | 13 +- include/asm-xtensa/dma.h | 5 +- include/asm-xtensa/elf.h | 9 +- include/asm-xtensa/fixmap.h | 252 ---- include/asm-xtensa/io.h | 64 +- include/asm-xtensa/irq.h | 8 +- include/asm-xtensa/mmu_context.h | 269 +---- include/asm-xtensa/page.h | 10 +- include/asm-xtensa/param.h | 2 +- include/asm-xtensa/pgtable.h | 41 +- include/asm-xtensa/platform-iss/hardware.h | 10 +- include/asm-xtensa/platform-iss/simcall.h | 62 + include/asm-xtensa/processor.h | 24 +- include/asm-xtensa/ptrace.h | 2 +- include/asm-xtensa/regs.h | 138 +++ include/asm-xtensa/sembuf.h | 2 +- include/asm-xtensa/system.h | 2 +- include/asm-xtensa/timex.h | 17 +- include/asm-xtensa/tlbflush.h | 42 +- include/asm-xtensa/variant-fsf/core.h | 359 ++++++ include/asm-xtensa/variant-fsf/tie.h | 22 + include/asm-xtensa/xtensa/cacheasm.h | 708 ----------- include/asm-xtensa/xtensa/cacheattrasm.h | 432 ------- include/asm-xtensa/xtensa/config-linux_be/core.h | 1270 -------------------- include/asm-xtensa/xtensa/config-linux_be/defs.h | 270 ----- .../asm-xtensa/xtensa/config-linux_be/specreg.h | 99 -- include/asm-xtensa/xtensa/config-linux_be/system.h | 198 --- include/asm-xtensa/xtensa/config-linux_be/tie.h | 275 ----- include/asm-xtensa/xtensa/coreasm.h | 526 -------- include/asm-xtensa/xtensa/corebits.h | 77 -- include/asm-xtensa/xtensa/hal.h | 822 ------------- include/asm-xtensa/xtensa/simcall.h | 130 -- include/asm-xtensa/xtensa/xt2000-uart.h | 155 --- include/asm-xtensa/xtensa/xt2000.h | 408 ------- include/asm-xtensa/xtensa/xtboard.h | 120 -- 41 files changed, 1070 insertions(+), 6128 deletions(-) create mode 100644 include/asm-xtensa/asmmacro.h create mode 100644 include/asm-xtensa/cacheasm.h delete mode 100644 include/asm-xtensa/fixmap.h create mode 100644 include/asm-xtensa/platform-iss/simcall.h create mode 100644 include/asm-xtensa/regs.h create mode 100644 include/asm-xtensa/variant-fsf/core.h create mode 100644 include/asm-xtensa/variant-fsf/tie.h delete mode 100644 include/asm-xtensa/xtensa/cacheasm.h delete mode 100644 include/asm-xtensa/xtensa/cacheattrasm.h delete mode 100644 include/asm-xtensa/xtensa/config-linux_be/core.h delete mode 100644 include/asm-xtensa/xtensa/config-linux_be/defs.h delete mode 100644 include/asm-xtensa/xtensa/config-linux_be/specreg.h delete mode 100644 include/asm-xtensa/xtensa/config-linux_be/system.h delete mode 100644 include/asm-xtensa/xtensa/config-linux_be/tie.h delete mode 100644 include/asm-xtensa/xtensa/coreasm.h delete mode 100644 include/asm-xtensa/xtensa/corebits.h delete mode 100644 include/asm-xtensa/xtensa/hal.h delete mode 100644 include/asm-xtensa/xtensa/simcall.h delete mode 100644 include/asm-xtensa/xtensa/xt2000-uart.h delete mode 100644 include/asm-xtensa/xtensa/xt2000.h delete mode 100644 include/asm-xtensa/xtensa/xtboard.h (limited to 'include') diff --git a/include/asm-xtensa/asmmacro.h b/include/asm-xtensa/asmmacro.h new file mode 100644 index 00000000000..76915cabad1 --- /dev/null +++ b/include/asm-xtensa/asmmacro.h @@ -0,0 +1,153 @@ +/* + * include/asm-xtensa/asmmacro.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_ASMMACRO_H +#define _XTENSA_ASMMACRO_H + +#include + +/* + * Some little helpers for loops. Use zero-overhead-loops + * where applicable and if supported by the processor. + * + * __loopi ar, at, size, inc + * ar register initialized with the start address + * at scratch register used by macro + * size size immediate value + * inc increment + * + * __loops ar, as, at, inc_log2[, mask_log2][, cond][, ncond] + * ar register initialized with the start address + * as register initialized with the size + * at scratch register use by macro + * inc_log2 increment [in log2] + * mask_log2 mask [in log2] + * cond true condition (used in loop'cond') + * ncond false condition (used in b'ncond') + * + * __loop as + * restart loop. 'as' register must not have been modified! + * + * __endla ar, at, incr + * ar start address (modified) + * as scratch register used by macro + * inc increment + */ + +/* + * loop for given size as immediate + */ + + .macro __loopi ar, at, size, incr + +#if XCHAL_HAVE_LOOPS + movi \at, ((\size + \incr - 1) / (\incr)) + loop \at, 99f +#else + addi \at, \ar, \size + 98: +#endif + + .endm + +/* + * loop for given size in register + */ + + .macro __loops ar, as, at, incr_log2, mask_log2, cond, ncond + +#if XCHAL_HAVE_LOOPS + .ifgt \incr_log2 - 1 + addi \at, \as, (1 << \incr_log2) - 1 + .ifnc \mask_log2, + extui \at, \at, \incr_log2, \mask_log2 + .else + srli \at, \at, \incr_log2 + .endif + .endif + loop\cond \at, 99f +#else + .ifnc \mask_log2, + extui \at, \as, \incr_log2, \mask_log2 + .else + .ifnc \ncond, + srli \at, \as, \incr_log2 + .endif + .endif + .ifnc \ncond, + b\ncond \at, 99f + + .endif + .ifnc \mask_log2, + slli \at, \at, \incr_log2 + add \at, \ar, \at + .else + add \at, \ar, \as + .endif +#endif + 98: + + .endm + +/* + * loop from ar to ax + */ + + .macro __loopt ar, as, at, incr_log2 + +#if XCHAL_HAVE_LOOPS + sub \at, \as, \ar + .ifgt \incr_log2 - 1 + addi \at, \at, (1 << \incr_log2) - 1 + srli \at, \at, \incr_log2 + .endif + loop \at, 99f +#else + 98: +#endif + + .endm + +/* + * restart loop. registers must be unchanged + */ + + .macro __loop as + +#if XCHAL_HAVE_LOOPS + loop \as, 99f +#else + 98: +#endif + + .endm + +/* + * end of loop with no increment of the address. + */ + + .macro __endl ar, as +#if !XCHAL_HAVE_LOOPS + bltu \ar, \as, 98b +#endif + 99: + .endm + +/* + * end of loop with increment of the address. + */ + + .macro __endla ar, as, incr + addi \ar, \ar, \incr + __endl \ar \as + .endm + + +#endif /* _XTENSA_ASMMACRO_H */ diff --git a/include/asm-xtensa/byteorder.h b/include/asm-xtensa/byteorder.h index 0ba72ddbf88..0f540a5f4c0 100644 --- a/include/asm-xtensa/byteorder.h +++ b/include/asm-xtensa/byteorder.h @@ -11,7 +11,6 @@ #ifndef _XTENSA_BYTEORDER_H #define _XTENSA_BYTEORDER_H -#include #include static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) diff --git a/include/asm-xtensa/cache.h b/include/asm-xtensa/cache.h index 1e79c0e2746..1c4a78f29ae 100644 --- a/include/asm-xtensa/cache.h +++ b/include/asm-xtensa/cache.h @@ -4,7 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * 2 of the License, or (at your option) any later version. * * (C) 2001 - 2005 Tensilica Inc. */ @@ -12,21 +11,14 @@ #ifndef _XTENSA_CACHE_H #define _XTENSA_CACHE_H -#include +#include -#if XCHAL_ICACHE_SIZE > 0 -# if (XCHAL_ICACHE_SIZE % (XCHAL_ICACHE_LINESIZE*XCHAL_ICACHE_WAYS*4)) != 0 -# error cache configuration outside expected/supported range! -# endif -#endif +#define L1_CACHE_SHIFT XCHAL_DCACHE_LINEWIDTH +#define L1_CACHE_BYTES XCHAL_DCACHE_LINESIZE +#define SMP_CACHE_BYTES L1_CACHE_BYTES -#if XCHAL_DCACHE_SIZE > 0 -# if (XCHAL_DCACHE_SIZE % (XCHAL_DCACHE_LINESIZE*XCHAL_DCACHE_WAYS*4)) != 0 -# error cache configuration outside expected/supported range! -# endif -#endif +#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE/XCHAL_DCACHE_WAYS) +#define ICACHE_WAY_SIZE (XCHAL_ICACHE_SIZE/XCHAL_ICACHE_WAYS) -#define L1_CACHE_SHIFT XCHAL_CACHE_LINEWIDTH_MAX -#define L1_CACHE_BYTES XCHAL_CACHE_LINESIZE_MAX #endif /* _XTENSA_CACHE_H */ diff --git a/include/asm-xtensa/cacheasm.h b/include/asm-xtensa/cacheasm.h new file mode 100644 index 00000000000..2c20a58f94c --- /dev/null +++ b/include/asm-xtensa/cacheasm.h @@ -0,0 +1,177 @@ +/* + * include/asm-xtensa/cacheasm.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Tensilica Inc. + */ + +#include +#include +#include + +/* + * Define cache functions as macros here so that they can be used + * by the kernel and boot loader. We should consider moving them to a + * library that can be linked by both. + * + * Locking + * + * ___unlock_dcache_all + * ___unlock_icache_all + * + * Flush and invaldating + * + * ___flush_invalidate_dcache_{all|range|page} + * ___flush_dcache_{all|range|page} + * ___invalidate_dcache_{all|range|page} + * ___invalidate_icache_{all|range|page} + * + */ + + .macro __loop_cache_all ar at insn size line_width + + movi \ar, 0 + + __loopi \ar, \at, \size, (4 << (\line_width)) + \insn \ar, 0 << (\line_width) + \insn \ar, 1 << (\line_width) + \insn \ar, 2 << (\line_width) + \insn \ar, 3 << (\line_width) + __endla \ar, \at, 4 << (\line_width) + + .endm + + + .macro __loop_cache_range ar as at insn line_width + + extui \at, \ar, 0, \line_width + add \as, \as, \at + + __loops \ar, \as, \at, \line_width + \insn \ar, 0 + __endla \ar, \at, (1 << (\line_width)) + + .endm + + + .macro __loop_cache_page ar at insn line_width + + __loopi \ar, \at, PAGE_SIZE, 4 << (\line_width) + \insn \ar, 0 << (\line_width) + \insn \ar, 1 << (\line_width) + \insn \ar, 2 << (\line_width) + \insn \ar, 3 << (\line_width) + __endla \ar, \at, 4 << (\line_width) + + .endm + + +#if XCHAL_DCACHE_LINE_LOCKABLE + + .macro ___unlock_dcache_all ar at + + __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH + + .endm + +#endif + +#if XCHAL_ICACHE_LINE_LOCKABLE + + .macro ___unlock_icache_all ar at + + __loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH + + .endm +#endif + + .macro ___flush_invalidate_dcache_all ar at + + __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___flush_dcache_all ar at + + __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_dcache_all ar at + + __loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \ + XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_icache_all ar at + + __loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \ + XCHAL_ICACHE_LINEWIDTH + + .endm + + + + .macro ___flush_invalidate_dcache_range ar as at + + __loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___flush_dcache_range ar as at + + __loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_dcache_range ar as at + + __loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_icache_range ar as at + + __loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH + + .endm + + + + .macro ___flush_invalidate_dcache_page ar as + + __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___flush_dcache_page ar as + + __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_dcache_page ar as + + __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_icache_page ar as + + __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH + + .endm + diff --git a/include/asm-xtensa/cacheflush.h b/include/asm-xtensa/cacheflush.h index 44a36e08784..337765b629d 100644 --- a/include/asm-xtensa/cacheflush.h +++ b/include/asm-xtensa/cacheflush.h @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * (C) 2001 - 2005 Tensilica Inc. + * (C) 2001 - 2006 Tensilica Inc. */ #ifndef _XTENSA_CACHEFLUSH_H diff --git a/include/asm-xtensa/checksum.h b/include/asm-xtensa/checksum.h index 5435aff9a4b..23534c60b3a 100644 --- a/include/asm-xtensa/checksum.h +++ b/include/asm-xtensa/checksum.h @@ -12,7 +12,7 @@ #define _XTENSA_CHECKSUM_H #include -#include +#include /* * computes the checksum of a memory block at buff, length len, diff --git a/include/asm-xtensa/coprocessor.h b/include/asm-xtensa/coprocessor.h index 5093034723b..bd09ec02d57 100644 --- a/include/asm-xtensa/coprocessor.h +++ b/include/asm-xtensa/coprocessor.h @@ -11,7 +11,16 @@ #ifndef _XTENSA_COPROCESSOR_H #define _XTENSA_COPROCESSOR_H -#include +#include +#include + +#if !XCHAL_HAVE_CP + +#define XTENSA_CP_EXTRA_OFFSET 0 +#define XTENSA_CP_EXTRA_ALIGN 1 /* must be a power of 2 */ +#define XTENSA_CP_EXTRA_SIZE 0 + +#else #define XTOFS(last_start,last_size,align) \ ((last_start+last_size+align-1) & -align) @@ -67,4 +76,6 @@ extern void save_coprocessor_registers(void*, int); # endif #endif +#endif + #endif /* _XTENSA_COPROCESSOR_H */ diff --git a/include/asm-xtensa/dma.h b/include/asm-xtensa/dma.h index db2633f6778..e30f3abf48f 100644 --- a/include/asm-xtensa/dma.h +++ b/include/asm-xtensa/dma.h @@ -12,7 +12,6 @@ #define _XTENSA_DMA_H #include /* need byte IO */ -#include /* * This is only to be defined if we have PC-like DMA. @@ -44,7 +43,9 @@ * enters another area, and virt_to_phys() may not return * the value desired). */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KSEG_CACHED_SIZE - 1) + +#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KIO_SIZE - 1) + /* Reserve and release a DMA channel */ extern int request_dma(unsigned int dmanr, const char * device_id); diff --git a/include/asm-xtensa/elf.h b/include/asm-xtensa/elf.h index de0667453b2..f0f9fd8560a 100644 --- a/include/asm-xtensa/elf.h +++ b/include/asm-xtensa/elf.h @@ -13,9 +13,8 @@ #ifndef _XTENSA_ELF_H #define _XTENSA_ELF_H +#include #include -#include -#include /* Xtensa processor ELF architecture-magic number */ @@ -118,11 +117,15 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG]; * using memcpy(). But we do allow space for such alignment, * to allow optimizations of layout and copying. */ - +#if 0 #define TOTAL_FPREGS_SIZE \ (4 + XTENSA_CPE_LTABLE_SIZE + XTENSA_CP_EXTRA_SIZE) #define ELF_NFPREG \ ((TOTAL_FPREGS_SIZE + sizeof(elf_fpreg_t) - 1) / sizeof(elf_fpreg_t)) +#else +#define TOTAL_FPREGS_SIZE 0 +#define ELF_NFPREG 0 +#endif typedef unsigned int elf_fpreg_t; typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; diff --git a/include/asm-xtensa/fixmap.h b/include/asm-xtensa/fixmap.h deleted file mode 100644 index 4423b8ad495..00000000000 --- a/include/asm-xtensa/fixmap.h +++ /dev/null @@ -1,252 +0,0 @@ -/* - * include/asm-xtensa/fixmap.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_FIXMAP_H -#define _XTENSA_FIXMAP_H - -#include - -#ifdef CONFIG_MMU - -/* - * Here we define all the compile-time virtual addresses. - */ - -#if XCHAL_SEG_MAPPABLE_VADDR != 0 -# error "Current port requires virtual user space starting at 0" -#endif -#if XCHAL_SEG_MAPPABLE_SIZE < 0x80000000 -# error "Current port requires at least 0x8000000 bytes for user space" -#endif - -/* Verify instruction/data ram/rom and xlmi don't overlay vmalloc space. */ - -#define __IN_VMALLOC(addr) \ - (((addr) >= VMALLOC_START) && ((addr) < VMALLOC_END)) -#define __SPAN_VMALLOC(start,end) \ - (((start) < VMALLOC_START) && ((end) >= VMALLOC_END)) -#define INSIDE_VMALLOC(start,end) \ - (__IN_VMALLOC((start)) || __IN_VMALLOC(end) || __SPAN_VMALLOC((start),(end))) - -#if XCHAL_NUM_INSTROM -# if XCHAL_NUM_INSTROM == 1 -# if INSIDE_VMALLOC(XCHAL_INSTROM0_VADDR,XCHAL_INSTROM0_VADDR+XCHAL_INSTROM0_SIZE) -# error vmalloc range conflicts with instrom0 -# endif -# endif -# if XCHAL_NUM_INSTROM == 2 -# if INSIDE_VMALLOC(XCHAL_INSTROM1_VADDR,XCHAL_INSTROM1_VADDR+XCHAL_INSTROM1_SIZE) -# error vmalloc range conflicts with instrom1 -# endif -# endif -#endif - -#if XCHAL_NUM_INSTRAM -# if XCHAL_NUM_INSTRAM == 1 -# if INSIDE_VMALLOC(XCHAL_INSTRAM0_VADDR,XCHAL_INSTRAM0_VADDR+XCHAL_INSTRAM0_SIZE) -# error vmalloc range conflicts with instram0 -# endif -# endif -# if XCHAL_NUM_INSTRAM == 2 -# if INSIDE_VMALLOC(XCHAL_INSTRAM1_VADDR,XCHAL_INSTRAM1_VADDR+XCHAL_INSTRAM1_SIZE) -# error vmalloc range conflicts with instram1 -# endif -# endif -#endif - -#if XCHAL_NUM_DATAROM -# if XCHAL_NUM_DATAROM == 1 -# if INSIDE_VMALLOC(XCHAL_DATAROM0_VADDR,XCHAL_DATAROM0_VADDR+XCHAL_DATAROM0_SIZE) -# error vmalloc range conflicts with datarom0 -# endif -# endif -# if XCHAL_NUM_DATAROM == 2 -# if INSIDE_VMALLOC(XCHAL_DATAROM1_VADDR,XCHAL_DATAROM1_VADDR+XCHAL_DATAROM1_SIZE) -# error vmalloc range conflicts with datarom1 -# endif -# endif -#endif - -#if XCHAL_NUM_DATARAM -# if XCHAL_NUM_DATARAM == 1 -# if INSIDE_VMALLOC(XCHAL_DATARAM0_VADDR,XCHAL_DATARAM0_VADDR+XCHAL_DATARAM0_SIZE) -# error vmalloc range conflicts with dataram0 -# endif -# endif -# if XCHAL_NUM_DATARAM == 2 -# if INSIDE_VMALLOC(XCHAL_DATARAM1_VADDR,XCHAL_DATARAM1_VADDR+XCHAL_DATARAM1_SIZE) -# error vmalloc range conflicts with dataram1 -# endif -# endif -#endif - -#if XCHAL_NUM_XLMI -# if XCHAL_NUM_XLMI == 1 -# if INSIDE_VMALLOC(XCHAL_XLMI0_VADDR,XCHAL_XLMI0_VADDR+XCHAL_XLMI0_SIZE) -# error vmalloc range conflicts with xlmi0 -# endif -# endif -# if XCHAL_NUM_XLMI == 2 -# if INSIDE_VMALLOC(XCHAL_XLMI1_VADDR,XCHAL_XLMI1_VADDR+XCHAL_XLMI1_SIZE) -# error vmalloc range conflicts with xlmi1 -# endif -# endif -#endif - -#if (XCHAL_NUM_INSTROM > 2) || \ - (XCHAL_NUM_INSTRAM > 2) || \ - (XCHAL_NUM_DATARAM > 2) || \ - (XCHAL_NUM_DATAROM > 2) || \ - (XCHAL_NUM_XLMI > 2) -# error Insufficient checks on vmalloc above for more than 2 devices -#endif - -/* - * USER_VM_SIZE does not necessarily equal TASK_SIZE. We bumped - * TASK_SIZE down to 0x4000000 to simplify the handling of windowed - * call instructions (currently limited to a range of 1 GByte). User - * tasks may very well reclaim the VM space from 0x40000000 to - * 0x7fffffff in the future, so we do not want the kernel becoming - * accustomed to having any of its stuff (e.g., page tables) in this - * region. This VM region is no-man's land for now. - */ - -#define USER_VM_START XCHAL_SEG_MAPPABLE_VADDR -#define USER_VM_SIZE 0x80000000 - -/* Size of page table: */ - -#define PGTABLE_SIZE_BITS (32 - XCHAL_MMU_MIN_PTE_PAGE_SIZE + 2) -#define PGTABLE_SIZE (1L << PGTABLE_SIZE_BITS) - -/* All kernel-mappable space: */ - -#define KERNEL_ALLMAP_START (USER_VM_START + USER_VM_SIZE) -#define KERNEL_ALLMAP_SIZE (XCHAL_SEG_MAPPABLE_SIZE - KERNEL_ALLMAP_START) - -/* Carve out page table at start of kernel-mappable area: */ - -#if KERNEL_ALLMAP_SIZE < PGTABLE_SIZE -#error "Gimme some space for page table!" -#endif -#define PGTABLE_START KERNEL_ALLMAP_START - -/* Remaining kernel-mappable space: */ - -#define KERNEL_MAPPED_START (KERNEL_ALLMAP_START + PGTABLE_SIZE) -#define KERNEL_MAPPED_SIZE (KERNEL_ALLMAP_SIZE - PGTABLE_SIZE) - -#if KERNEL_MAPPED_SIZE < 0x01000000 /* 16 MB is arbitrary for now */ -# error "Shouldn't the kernel have at least *some* mappable space?" -#endif - -#define MAX_LOW_MEMORY XCHAL_KSEG_CACHED_SIZE - -#endif - -/* - * Some constants used elsewhere, but perhaps only in Xtensa header - * files, so maybe we can get rid of some and access compile-time HAL - * directly... - * - * Note: We assume that system RAM is located at the very start of the - * kernel segments !! - */ -#define KERNEL_VM_LOW XCHAL_KSEG_CACHED_VADDR -#define KERNEL_VM_HIGH XCHAL_KSEG_BYPASS_VADDR -#define KERNEL_SPACE XCHAL_KSEG_CACHED_VADDR - -/* - * Returns the physical/virtual addresses of the kernel space - * (works with the cached kernel segment only, which is the - * one normally used for kernel operation). - */ - -/* PHYSICAL BYPASS CACHED - * - * bypass vaddr bypass paddr * cached vaddr - * cached vaddr cached paddr bypass vaddr * - * bypass paddr * bypass vaddr cached vaddr - * cached paddr * bypass vaddr cached vaddr - * other * * * - */ - -#define PHYSADDR(a) \ -(((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_PADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_PADDR : \ - (unsigned)(a)) - -#define BYPASS_ADDR(a) \ -(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_CACHED_SIZE)? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_BYPASS_VADDR: \ - (unsigned)(a)) - -#define CACHED_ADDR(a) \ -(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_CACHED_VADDR : \ - (unsigned)(a)) - -#define PHYSADDR_IO(a) \ -(((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_PADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_PADDR : \ - (unsigned)(a)) - -#define BYPASS_ADDR_IO(a) \ -(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_BYPASS_VADDR : \ - (unsigned)(a)) - -#define CACHED_ADDR_IO(a) \ -(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_CACHED_VADDR : \ - (unsigned)(a)) - -#endif /* _XTENSA_ADDRSPACE_H */ - - - - - diff --git a/include/asm-xtensa/io.h b/include/asm-xtensa/io.h index 556e5eed34f..31ffc3f119c 100644 --- a/include/asm-xtensa/io.h +++ b/include/asm-xtensa/io.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-xtensa/io.h + * include/asm-xtensa/io.h * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -15,10 +15,11 @@ #include #include -#include - -#define _IO_BASE 0 +#define XCHAL_KIO_CACHED_VADDR 0xf0000000 +#define XCHAL_KIO_BYPASS_VADDR 0xf8000000 +#define XCHAL_KIO_PADDR 0xf0000000 +#define XCHAL_KIO_SIZE 0x08000000 /* * swap functions to change byte order from little-endian to big-endian and @@ -42,40 +43,43 @@ static inline unsigned int _swapl (unsigned int v) static inline unsigned long virt_to_phys(volatile void * address) { - return PHYSADDR((unsigned long)address); + return __pa(address); } static inline void * phys_to_virt(unsigned long address) { - return (void*) CACHED_ADDR(address); + return __va(address); } /* - * IO bus memory addresses are also 1:1 with the physical address + * virt_to_bus and bus_to_virt are deprecated. */ -static inline unsigned long virt_to_bus(volatile void * address) -{ - return PHYSADDR((unsigned long)address); -} - -static inline void * bus_to_virt (unsigned long address) -{ - return (void *) CACHED_ADDR(address); -} +#define virt_to_bus(x) virt_to_phys(x) +#define bus_to_virt(x) phys_to_virt(x) /* - * Change "struct page" to physical address. + * Return the virtual (cached) address for the specified bus memory. + * Note that we currently don't support any address outside the KIO segment. */ static inline void *ioremap(unsigned long offset, unsigned long size) { - return (void *) CACHED_ADDR_IO(offset); + if (offset >= XCHAL_KIO_PADDR + && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) + return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR); + + else + BUG(); } static inline void *ioremap_nocache(unsigned long offset, unsigned long size) { - return (void *) BYPASS_ADDR_IO(offset); + if (offset >= XCHAL_KIO_PADDR + && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) + return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR); + else + BUG(); } static inline void iounmap(void *addr) @@ -121,9 +125,6 @@ static inline void __raw_writel(__u32 b, volatile void __iomem *addr) *(__force volatile __u32 *)(addr) = b; } - - - /* These are the definitions for the x86 IO instructions * inb/inw/inl/outb/outw/outl, the "string" versions * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions @@ -131,11 +132,11 @@ static inline void __raw_writel(__u32 b, volatile void __iomem *addr) * The macros don't do byte-swapping. */ -#define inb(port) readb((u8 *)((port)+_IO_BASE)) -#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port)+_IO_BASE)) -#define inw(port) readw((u16 *)((port)+_IO_BASE)) -#define outw(val, port) writew((val),(u16 *)((unsigned long)(port)+_IO_BASE)) -#define inl(port) readl((u32 *)((port)+_IO_BASE)) +#define inb(port) readb((u8 *)((port))) +#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port))) +#define inw(port) readw((u16 *)((port))) +#define outw(val, port) writew((val),(u16 *)((unsigned long)(port))) +#define inl(port) readl((u32 *)((port))) #define outl(val, port) writel((val),(u32 *)((unsigned long)(port))) #define inb_p(port) inb((port)) @@ -180,14 +181,13 @@ extern void outsl (unsigned long port, const void *src, unsigned long count); /* - * * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * * access - * */ + * Convert a physical pointer to a virtual kernel pointer for /dev/mem access + */ #define xlate_dev_mem_ptr(p) __va(p) /* - * * Convert a virtual cached pointer to an uncached pointer - * */ + * Convert a virtual cached pointer to an uncached pointer + */ #define xlate_dev_kmem_ptr(p) p diff --git a/include/asm-xtensa/irq.h b/include/asm-xtensa/irq.h index 049fde7e752..fc73b7f11af 100644 --- a/include/asm-xtensa/irq.h +++ b/include/asm-xtensa/irq.h @@ -12,8 +12,7 @@ #define _XTENSA_IRQ_H #include - -#include +#include #ifndef PLATFORM_NR_IRQS # define PLATFORM_NR_IRQS 0 @@ -27,10 +26,5 @@ static __inline__ int irq_canonicalize(int irq) } struct irqaction; -#if 0 // FIXME -extern void disable_irq_nosync(unsigned int); -extern void disable_irq(unsigned int); -extern void enable_irq(unsigned int); -#endif #endif /* _XTENSA_IRQ_H */ diff --git a/include/asm-xtensa/mmu_context.h b/include/asm-xtensa/mmu_context.h index af683a74a4e..f14851f086c 100644 --- a/include/asm-xtensa/mmu_context.h +++ b/include/asm-xtensa/mmu_context.h @@ -16,187 +16,32 @@ #include #include -#include #include #include -/* - * Linux was ported to Xtensa assuming all auto-refill ways in set 0 - * had the same properties (a very likely assumption). Multiple sets - * of auto-refill ways will still work properly, but not as optimally - * as the Xtensa designer may have assumed. - * - * We make this case a hard #error, killing the kernel build, to alert - * the developer to this condition (which is more likely an error). - * You super-duper clever developers can change it to a warning or - * remove it altogether if you think you know what you're doing. :) - */ +#define XCHAL_MMU_ASID_BITS 8 #if (XCHAL_HAVE_TLBS != 1) # error "Linux must have an MMU!" #endif -#if ((XCHAL_ITLB_ARF_WAYS == 0) || (XCHAL_DTLB_ARF_WAYS == 0)) -# error "MMU must have auto-refill ways" -#endif - -#if ((XCHAL_ITLB_ARF_SETS != 1) || (XCHAL_DTLB_ARF_SETS != 1)) -# error Linux may not use all auto-refill ways as efficiently as you think -#endif - -#if (XCHAL_MMU_MAX_PTE_PAGE_SIZE != XCHAL_MMU_MIN_PTE_PAGE_SIZE) -# error Only one page size allowed! -#endif - extern unsigned long asid_cache; -extern pgd_t *current_pgd; - -/* - * Define the number of entries per auto-refill way in set 0 of both I and D - * TLBs. We deal only with set 0 here (an assumption further explained in - * assertions.h). Also, define the total number of ARF entries in both TLBs. - */ - -#define ITLB_ENTRIES_PER_ARF_WAY (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES)) -#define DTLB_ENTRIES_PER_ARF_WAY (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES)) - -#define ITLB_ENTRIES \ - (ITLB_ENTRIES_PER_ARF_WAY * (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,WAYS))) -#define DTLB_ENTRIES \ - (DTLB_ENTRIES_PER_ARF_WAY * (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,WAYS))) - - -/* - * SMALLEST_NTLB_ENTRIES is the smaller of ITLB_ENTRIES and DTLB_ENTRIES. - * In practice, they are probably equal. This macro simplifies function - * flush_tlb_range(). - */ - -#if (DTLB_ENTRIES < ITLB_ENTRIES) -# define SMALLEST_NTLB_ENTRIES DTLB_ENTRIES -#else -# define SMALLEST_NTLB_ENTRIES ITLB_ENTRIES -#endif - - -/* - * asid_cache tracks only the ASID[USER_RING] field of the RASID special - * register, which is the current user-task asid allocation value. - * mm->context has the same meaning. When it comes time to write the - * asid_cache or mm->context values to the RASID special register, we first - * shift the value left by 8, then insert the value. - * ASID[0] always contains the kernel's asid value, and we reserve three - * other asid values that we never assign to user tasks. - */ - -#define ASID_INC 0x1 -#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1) - -/* - * XCHAL_MMU_ASID_INVALID is a configurable Xtensa processor constant - * indicating invalid address space. XCHAL_MMU_ASID_KERNEL is a configurable - * Xtensa processor constant indicating the kernel address space. They can - * be arbitrary values. - * - * We identify three more unique, reserved ASID values to use in the unused - * ring positions. No other user process will be assigned these reserved - * ASID values. - * - * For example, given that - * - * XCHAL_MMU_ASID_INVALID == 0 - * XCHAL_MMU_ASID_KERNEL == 1 - * - * the following maze of #if statements would generate - * - * ASID_RESERVED_1 == 2 - * ASID_RESERVED_2 == 3 - * ASID_RESERVED_3 == 4 - * ASID_FIRST_NONRESERVED == 5 - */ - -#if (XCHAL_MMU_ASID_INVALID != XCHAL_MMU_ASID_KERNEL + 1) -# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 1) & ASID_MASK) -#else -# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 2) & ASID_MASK) -#endif - -#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_1 + 1) -# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 1) & ASID_MASK) -#else -# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 2) & ASID_MASK) -#endif - -#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_2 + 1) -# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 1) & ASID_MASK) -#else -# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 2) & ASID_MASK) -#endif - -#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_3 + 1) -# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 1) & ASID_MASK) -#else -# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 2) & ASID_MASK) -#endif - -#define ASID_ALL_RESERVED ( ((ASID_RESERVED_1) << 24) + \ - ((ASID_RESERVED_2) << 16) + \ - ((ASID_RESERVED_3) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - /* * NO_CONTEXT is the invalid ASID value that we don't ever assign to - * any user or kernel context. NO_CONTEXT is a better mnemonic than - * XCHAL_MMU_ASID_INVALID, so we use it in code instead. - */ - -#define NO_CONTEXT XCHAL_MMU_ASID_INVALID - -#if (KERNEL_RING != 0) -# error The KERNEL_RING really should be zero. -#endif - -#if (USER_RING >= XCHAL_MMU_RINGS) -# error USER_RING cannot be greater than the highest numbered ring. -#endif - -#if (USER_RING == KERNEL_RING) -# error The user and kernel rings really should not be equal. -#endif - -#if (USER_RING == 1) -#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \ - ((ASID_RESERVED_2) << 16) + \ - (((x) & (ASID_MASK)) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - -#elif (USER_RING == 2) -#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \ - (((x) & (ASID_MASK)) << 16) + \ - ((ASID_RESERVED_2) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - -#elif (USER_RING == 3) -#define ASID_INSERT(x) ( (((x) & (ASID_MASK)) << 24) + \ - ((ASID_RESERVED_1) << 16) + \ - ((ASID_RESERVED_2) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - -#else -#error Goofy value for USER_RING - -#endif /* USER_RING == 1 */ - - -/* - * All unused by hardware upper bits will be considered - * as a software asid extension. + * any user or kernel context. + * + * 0 invalid + * 1 kernel + * 2 reserved + * 3 reserved + * 4...255 available */ -#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) -#define ASID_FIRST_VERSION \ - ((unsigned long)(~ASID_VERSION_MASK) + 1 + ASID_FIRST_NONRESERVED) +#define NO_CONTEXT 0 +#define ASID_USER_FIRST 4 +#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1) +#define ASID_INSERT(x) (0x03020001 | (((x) & ASID_MASK) << 8)) static inline void set_rasid_register (unsigned long val) { @@ -207,67 +52,28 @@ static inline void set_rasid_register (unsigned long val) static inline unsigned long get_rasid_register (void) { unsigned long tmp; - __asm__ __volatile__ (" rsr %0, "__stringify(RASID)"\n\t" : "=a" (tmp)); + __asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp)); return tmp; } - -#if ((XCHAL_MMU_ASID_INVALID == 0) && (XCHAL_MMU_ASID_KERNEL == 1)) - static inline void -get_new_mmu_context(struct mm_struct *mm, unsigned long asid) +__get_new_mmu_context(struct mm_struct *mm) { extern void flush_tlb_all(void); - if (! ((asid += ASID_INC) & ASID_MASK) ) { + if (! (++asid_cache & ASID_MASK) ) { flush_tlb_all(); /* start new asid cycle */ - if (!asid) /* fix version if needed */ - asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED; - asid += ASID_FIRST_NONRESERVED; + asid_cache += ASID_USER_FIRST; } - mm->context = asid_cache = asid; -} - -#else -#warning ASID_{INVALID,KERNEL} values impose non-optimal get_new_mmu_context implementation - -/* XCHAL_MMU_ASID_INVALID == 0 and XCHAL_MMU_ASID_KERNEL ==1 are - really the best, but if you insist... */ - -static inline int validate_asid (unsigned long asid) -{ - switch (asid) { - case XCHAL_MMU_ASID_INVALID: - case XCHAL_MMU_ASID_KERNEL: - case ASID_RESERVED_1: - case ASID_RESERVED_2: - case ASID_RESERVED_3: - return 0; /* can't use these values as ASIDs */ - } - return 1; /* valid */ + mm->context = asid_cache; } static inline void -get_new_mmu_context(struct mm_struct *mm, unsigned long asid) +__load_mmu_context(struct mm_struct *mm) { - extern void flush_tlb_all(void); - while (1) { - asid += ASID_INC; - if ( ! (asid & ASID_MASK) ) { - flush_tlb_all(); /* start new asid cycle */ - if (!asid) /* fix version if needed */ - asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED; - asid += ASID_FIRST_NONRESERVED; - break; /* no need to validate here */ - } - if (validate_asid (asid & ASID_MASK)) - break; - } - mm->context = asid_cache = asid; + set_rasid_register(ASID_INSERT(mm->context)); + invalidate_page_directory(); } -#endif - - /* * Initialize the context related info for a new mm_struct * instance. @@ -280,6 +86,20 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) return 0; } +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void +activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + /* Unconditionally get a new ASID. */ + + __get_new_mmu_context(next); + __load_mmu_context(next); +} + + static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { @@ -287,11 +107,10 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, /* Check if our ASID is of an older version and thus invalid */ - if ((next->context ^ asid) & ASID_VERSION_MASK) - get_new_mmu_context(next, asid); + if (next->context == NO_CONTEXT || ((next->context^asid) & ~ASID_MASK)) + __get_new_mmu_context(next); - set_rasid_register (ASID_INSERT(next->context)); - invalidate_page_directory(); + __load_mmu_context(next); } #define deactivate_mm(tsk, mm) do { } while(0) @@ -302,20 +121,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, */ static inline void destroy_context(struct mm_struct *mm) { - /* Nothing to do. */ -} - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void -activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - /* Unconditionally get a new ASID. */ - - get_new_mmu_context(next, asid_cache); - set_rasid_register (ASID_INSERT(next->context)); invalidate_page_directory(); } diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h index 40f4c6c3f58..c631d006194 100644 --- a/include/asm-xtensa/page.h +++ b/include/asm-xtensa/page.h @@ -15,18 +15,24 @@ #include +#define XCHAL_KSEG_CACHED_VADDR 0xd0000000 +#define XCHAL_KSEG_BYPASS_VADDR 0xd8000000 +#define XCHAL_KSEG_PADDR 0x00000000 +#define XCHAL_KSEG_SIZE 0x08000000 + /* * PAGE_SHIFT determines the page size * PAGE_ALIGN(x) aligns the pointer to the (next) page boundary */ -#define PAGE_SHIFT XCHAL_MMU_MIN_PTE_PAGE_SIZE +#define PAGE_SHIFT 12 #define PAGE_SIZE (1 << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) -#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS) #define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR +#define MAX_MEM_PFN XCHAL_KSEG_SIZE +#define PGTABLE_START 0x80000000 #ifdef __ASSEMBLY__ diff --git a/include/asm-xtensa/param.h b/include/asm-xtensa/param.h index c0eec8260b0..6f281392e3f 100644 --- a/include/asm-xtensa/param.h +++ b/include/asm-xtensa/param.h @@ -11,7 +11,7 @@ #ifndef _XTENSA_PARAM_H #define _XTENSA_PARAM_H -#include +#include #ifdef __KERNEL__ # define HZ 100 /* internal timer frequency */ diff --git a/include/asm-xtensa/pgtable.h b/include/asm-xtensa/pgtable.h index b4318934b10..2d4b5db6ea6 100644 --- a/include/asm-xtensa/pgtable.h +++ b/include/asm-xtensa/pgtable.h @@ -14,45 +14,6 @@ #include #include -/* Assertions. */ - -#ifdef CONFIG_MMU - - -#if (XCHAL_MMU_RINGS < 2) -# error Linux build assumes at least 2 ring levels. -#endif - -#if (XCHAL_MMU_CA_BITS != 4) -# error We assume exactly four bits for CA. -#endif - -#if (XCHAL_MMU_SR_BITS != 0) -# error We have no room for SR bits. -#endif - -/* - * Use the first min-wired way for mapping page-table pages. - * Page coloring requires a second min-wired way. - */ - -#if (XCHAL_DTLB_MINWIRED_SETS == 0) -# error Need a min-wired way for mapping page-table pages -#endif - -#define DTLB_WAY_PGTABLE XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAY) - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK -# if XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAYS) >= 2 -# define DTLB_WAY_DCACHE_ALIAS0 (DTLB_WAY_PGTABLE + 1) -# define DTLB_WAY_DCACHE_ALIAS1 (DTLB_WAY_PGTABLE + 2) -# else -# error Page coloring requires its own wired dtlb way! -# endif -#endif - -#endif /* CONFIG_MMU */ - /* * We only use two ring levels, user and kernel space. */ @@ -97,7 +58,7 @@ #define PGD_ORDER 0 #define PMD_ORDER 0 #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS XCHAL_SEG_MAPPABLE_VADDR +#define FIRST_USER_ADDRESS 0 #define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT) /* virtual memory area. We keep a distance to other memory regions to be diff --git a/include/asm-xtensa/platform-iss/hardware.h b/include/asm-xtensa/platform-iss/hardware.h index 22240f00180..6930c12adc1 100644 --- a/include/asm-xtensa/platform-iss/hardware.h +++ b/include/asm-xtensa/platform-iss/hardware.h @@ -12,18 +12,18 @@ * This file contains the default configuration of ISS. */ -#ifndef __ASM_XTENSA_ISS_HARDWARE -#define __ASM_XTENSA_ISS_HARDWARE +#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H +#define _XTENSA_PLATFORM_ISS_HARDWARE_H /* * Memory configuration. */ -#define PLATFORM_DEFAULT_MEM_START XSHAL_RAM_PADDR -#define PLATFORM_DEFAULT_MEM_SIZE XSHAL_RAM_VSIZE +#define PLATFORM_DEFAULT_MEM_START 0x00000000 +#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000 /* * Interrupt configuration. */ -#endif /* __ASM_XTENSA_ISS_HARDWARE */ +#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */ diff --git a/include/asm-xtensa/platform-iss/simcall.h b/include/asm-xtensa/platform-iss/simcall.h new file mode 100644 index 00000000000..6acb572759a --- /dev/null +++ b/include/asm-xtensa/platform-iss/simcall.h @@ -0,0 +1,62 @@ +/* + * include/asm-xtensa/platform-iss/hardware.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_PLATFORM_ISS_SIMCALL_H +#define _XTENSA_PLATFORM_ISS_SIMCALL_H + + +/* + * System call like services offered by the simulator host. + */ + +#define SYS_nop 0 /* unused */ +#define SYS_exit 1 /*x*/ +#define SYS_fork 2 +#define SYS_read 3 /*x*/ +#define SYS_write 4 /*x*/ +#define SYS_open 5 /*x*/ +#define SYS_close 6 /*x*/ +#define SYS_rename 7 /*x 38 - waitpid */ +#define SYS_creat 8 /*x*/ +#define SYS_link 9 /*x (not implemented on WIN32) */ +#define SYS_unlink 10 /*x*/ +#define SYS_execv 11 /* n/a - execve */ +#define SYS_execve 12 /* 11 - chdir */ +#define SYS_pipe 13 /* 42 - time */ +#define SYS_stat 14 /* 106 - mknod */ +#define SYS_chmod 15 +#define SYS_chown 16 /* 202 - lchown */ +#define SYS_utime 17 /* 30 - break */ +#define SYS_wait 18 /* n/a - oldstat */ +#define SYS_lseek 19 /*x*/ +#define SYS_getpid 20 +#define SYS_isatty 21 /* n/a - mount */ +#define SYS_fstat 22 /* 108 - oldumount */ +#define SYS_time 23 /* 13 - setuid */ +#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */ +#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */ +#define SYS_socket 26 +#define SYS_sendto 27 +#define SYS_recvfrom 28 +#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */ +#define SYS_bind 30 +#define SYS_ioctl 31 + +/* + * SYS_select_one specifiers + */ + +#define XTISS_SELECT_ONE_READ 1 +#define XTISS_SELECT_ONE_WRITE 2 +#define XTISS_SELECT_ONE_EXCEPT 3 + + +#endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */ + diff --git a/include/asm-xtensa/processor.h b/include/asm-xtensa/processor.h index 8b96e77c9d8..4feb9f7f35a 100644 --- a/include/asm-xtensa/processor.h +++ b/include/asm-xtensa/processor.h @@ -11,24 +11,18 @@ #ifndef _XTENSA_PROCESSOR_H #define _XTENSA_PROCESSOR_H -#ifdef __ASSEMBLY__ -#define _ASMLANGUAGE -#endif - -#include -#include -#include -#include +#include +#include #include #include #include -#include +#include /* Assertions. */ #if (XCHAL_HAVE_WINDOWED != 1) -#error Linux requires the Xtensa Windowed Registers Option. +# error Linux requires the Xtensa Windowed Registers Option. #endif /* @@ -145,11 +139,11 @@ struct thread_struct { * Note: We set-up ps as if we did a call4 to the new pc. * set_thread_state in signal.c depends on it. */ -#define USER_PS_VALUE ( (1 << XCHAL_PS_WOE_SHIFT) + \ - (1 << XCHAL_PS_CALLINC_SHIFT) + \ - (USER_RING << XCHAL_PS_RING_SHIFT) + \ - (1 << XCHAL_PS_PROGSTACK_SHIFT) + \ - (1 << XCHAL_PS_EXCM_SHIFT) ) +#define USER_PS_VALUE ((1 << PS_WOE_BIT) | \ + (1 << PS_CALLINC_SHIFT) | \ + (USER_RING << PS_RING_SHIFT) | \ + (1 << PS_UM_BIT) | \ + (1 << PS_EXCM_BIT)) /* Clearing a0 terminates the backtrace. */ #define start_thread(regs, new_pc, new_sp) \ diff --git a/include/asm-xtensa/ptrace.h b/include/asm-xtensa/ptrace.h index a5ac71a5205..1b7fe363fad 100644 --- a/include/asm-xtensa/ptrace.h +++ b/include/asm-xtensa/ptrace.h @@ -11,7 +11,7 @@ #ifndef _XTENSA_PTRACE_H #define _XTENSA_PTRACE_H -#include +#include /* * Kernel stack diff --git a/include/asm-xtensa/regs.h b/include/asm-xtensa/regs.h new file mode 100644 index 00000000000..c913d259faa --- /dev/null +++ b/include/asm-xtensa/regs.h @@ -0,0 +1,138 @@ +/* + * Copyright (c) 2006 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + +#ifndef _XTENSA_REGS_H +#define _XTENSA_REGS_H + +/* Special registers. */ + +#define LBEG 0 +#define LEND 1 +#define LCOUNT 2 +#define SAR 3 +#define BR 4 +#define SCOMPARE1 12 +#define ACCHI 16 +#define ACCLO 17 +#define MR 32 +#define WINDOWBASE 72 +#define WINDOWSTART 73 +#define PTEVADDR 83 +#define RASID 90 +#define ITLBCFG 91 +#define DTLBCFG 92 +#define IBREAKENABLE 96 +#define DDR 104 +#define IBREAKA 128 +#define DBREAKA 144 +#define DBREAKC 160 +#define EPC 176 +#define EPC_1 177 +#define DEPC 192 +#define EPS 192 +#define EPS_1 193 +#define EXCSAVE 208 +#define EXCSAVE_1 209 +#define INTERRUPT 226 +#define INTENABLE 228 +#define PS 230 +#define THREADPTR 231 +#define EXCCAUSE 232 +#define DEBUGCAUSE 233 +#define CCOUNT 234 +#define PRID 235 +#define ICOUNT 236 +#define ICOUNTLEVEL 237 +#define EXCVADDR 238 +#define CCOMPARE 240 +#define MISC 244 + +/* Special names for read-only and write-only interrupt registers. */ + +#define INTREAD 226 +#define INTSET 226 +#define INTCLEAR 227 + +/* EXCCAUSE register fields */ + +#define EXCCAUSE_EXCCAUSE_SHIFT 0 +#define EXCCAUSE_EXCCAUSE_MASK 0x3F + +#define EXCCAUSE_ILLEGAL_INSTRUCTION 0 +#define EXCCAUSE_SYSTEM_CALL 1 +#define EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 +#define EXCCAUSE_LOAD_STORE_ERROR 3 +#define EXCCAUSE_LEVEL1_INTERRUPT 4 +#define EXCCAUSE_ALLOCA 5 +#define EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 +#define EXCCAUSE_SPECULATION 7 +#define EXCCAUSE_PRIVILEGED 8 +#define EXCCAUSE_UNALIGNED 9 +#define EXCCAUSE_ITLB_MISS 16 +#define EXCCAUSE_ITLB_MULTIHIT 17 +#define EXCCAUSE_ITLB_PRIVILEGE 18 +#define EXCCAUSE_ITLB_SIZE_RESTRICTION 19 +#define EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 +#define EXCCAUSE_DTLB_MISS 24 +#define EXCCAUSE_DTLB_MULTIHIT 25 +#define EXCCAUSE_DTLB_PRIVILEGE 26 +#define EXCCAUSE_DTLB_SIZE_RESTRICTION 27 +#define EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 +#define EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 +#define EXCCAUSE_FLOATING_POINT 40 + +/* PS register fields. */ + +#define PS_WOE_BIT 18 +#define PS_CALLINC_SHIFT 16 +#define PS_CALLINC_MASK 0x00030000 +#define PS_OWB_SHIFT 8 +#define PS_OWB_MASK 0x00000F00 +#define PS_RING_SHIFT 6 +#define PS_RING_MASK 0x000000C0 +#define PS_UM_BIT 5 +#define PS_EXCM_BIT 4 +#define PS_INTLEVEL_SHIFT 0 +#define PS_INTLEVEL_MASK 0x0000000F + +/* DBREAKCn register fields. */ + +#define DBREAKC_MASK_BIT 0 +#define DBREAKC_MASK_MASK 0x0000003F +#define DBREAKC_LOAD_BIT 30 +#define DBREAKC_LOAD_MASK 0x40000000 +#define DBREAKC_STOR_BIT 31 +#define DBREAKC_STOR_MASK 0x80000000 + +/* DEBUGCAUSE register fields. */ + +#define DEBUGCAUSE_DEBUGINT_BIT 5 /* External debug interrupt */ +#define DEBUGCAUSE_BREAKN_BIT 4 /* BREAK.N instruction */ +#define DEBUGCAUSE_BREAK_BIT 3 /* BREAK instruction */ +#define DEBUGCAUSE_DBREAK_BIT 2 /* DBREAK match */ +#define DEBUGCAUSE_IBREAK_BIT 1 /* IBREAK match */ +#define DEBUGCAUSE_ICOUNT_BIT 0 /* ICOUNT would incr. to zero */ + +#endif /* _XTENSA_SPECREG_H */ + diff --git a/include/asm-xtensa/sembuf.h b/include/asm-xtensa/sembuf.h index 2d26c47666f..c15870493b3 100644 --- a/include/asm-xtensa/sembuf.h +++ b/include/asm-xtensa/sembuf.h @@ -25,7 +25,7 @@ struct semid64_ds { struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#if XCHAL_HAVE_LE +#ifdef __XTENSA_EL__ __kernel_time_t sem_otime; /* last semop time */ unsigned long __unused1; __kernel_time_t sem_ctime; /* last change time */ diff --git a/include/asm-xtensa/system.h b/include/asm-xtensa/system.h index 932bda92a21..4aaed7fe6cf 100644 --- a/include/asm-xtensa/system.h +++ b/include/asm-xtensa/system.h @@ -213,7 +213,7 @@ static inline void spill_registers(void) unsigned int a0, ps; __asm__ __volatile__ ( - "movi a14," __stringify (PS_EXCM_MASK) " | 1\n\t" + "movi a14," __stringify (PS_EXCM_BIT) " | 1\n\t" "mov a12, a0\n\t" "rsr a13," __stringify(SAR) "\n\t" "xsr a14," __stringify(PS) "\n\t" diff --git a/include/asm-xtensa/timex.h b/include/asm-xtensa/timex.h index c7b705e6665..28c7985a400 100644 --- a/include/asm-xtensa/timex.h +++ b/include/asm-xtensa/timex.h @@ -16,17 +16,22 @@ #include #include -#if XCHAL_INT_LEVEL(XCHAL_TIMER0_INTERRUPT) == 1 +#define _INTLEVEL(x) XCHAL_INT ## x ## _LEVEL +#define INTLEVEL(x) _INTLEVEL(x) + +#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1 # define LINUX_TIMER 0 -#elif XCHAL_INT_LEVEL(XCHAL_TIMER1_INTERRUPT) == 1 +# define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT +#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1 # define LINUX_TIMER 1 -#elif XCHAL_INT_LEVEL(XCHAL_TIMER2_INTERRUPT) == 1 +# define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT +#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1 # define LINUX_TIMER 2 +# define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT #else # error "Bad timer number for Linux configurations!" #endif -#define LINUX_TIMER_INT XCHAL_TIMER_INTERRUPT(LINUX_TIMER) #define LINUX_TIMER_MASK (1L << LINUX_TIMER_INT) #define CLOCK_TICK_RATE 1193180 /* (everyone is using this value) */ @@ -60,8 +65,8 @@ extern cycles_t cacheflush_time; #define WSR_CCOUNT(r) __asm__("wsr %0,"__stringify(CCOUNT) :: "a" (r)) #define RSR_CCOUNT(r) __asm__("rsr %0,"__stringify(CCOUNT) : "=a" (r)) -#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) :: "a"(r)) -#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) : "=a"(r)) +#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r)) +#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r)) static inline unsigned long get_ccount (void) { diff --git a/include/asm-xtensa/tlbflush.h b/include/asm-xtensa/tlbflush.h index 43f6ec859af..7c637b3c352 100644 --- a/include/asm-xtensa/tlbflush.h +++ b/include/asm-xtensa/tlbflush.h @@ -11,12 +11,20 @@ #ifndef _XTENSA_TLBFLUSH_H #define _XTENSA_TLBFLUSH_H -#define DEBUG_TLB - #ifdef __KERNEL__ -#include #include +#include + +#define DTLB_WAY_PGD 7 + +#define ITLB_ARF_WAYS 4 +#define DTLB_ARF_WAYS 4 + +#define ITLB_HIT_BIT 3 +#define DTLB_HIT_BIT 4 + +#ifndef __ASSEMBLY__ /* TLB flushing: * @@ -46,11 +54,6 @@ static inline void flush_tlb_pgtables(struct mm_struct *mm, /* TLB operations. */ -#define ITLB_WAYS_LOG2 XCHAL_ITLB_WAY_BITS -#define DTLB_WAYS_LOG2 XCHAL_DTLB_WAY_BITS -#define ITLB_PROBE_SUCCESS (1 << ITLB_WAYS_LOG2) -#define DTLB_PROBE_SUCCESS (1 << DTLB_WAYS_LOG2) - static inline unsigned long itlb_probe(unsigned long addr) { unsigned long tmp; @@ -131,29 +134,30 @@ static inline void write_itlb_entry (pte_t entry, int way) static inline void invalidate_page_directory (void) { - invalidate_dtlb_entry (DTLB_WAY_PGTABLE); + invalidate_dtlb_entry (DTLB_WAY_PGD); + invalidate_dtlb_entry (DTLB_WAY_PGD+1); + invalidate_dtlb_entry (DTLB_WAY_PGD+2); } static inline void invalidate_itlb_mapping (unsigned address) { unsigned long tlb_entry; - while ((tlb_entry = itlb_probe (address)) & ITLB_PROBE_SUCCESS) - invalidate_itlb_entry (tlb_entry); + if (((tlb_entry = itlb_probe(address)) & (1 << ITLB_HIT_BIT)) != 0) + invalidate_itlb_entry(tlb_entry); } static inline void invalidate_dtlb_mapping (unsigned address) { unsigned long tlb_entry; - while ((tlb_entry = dtlb_probe (address)) & DTLB_PROBE_SUCCESS) - invalidate_dtlb_entry (tlb_entry); + if (((tlb_entry = dtlb_probe(address)) & (1 << DTLB_HIT_BIT)) != 0) + invalidate_dtlb_entry(tlb_entry); } #define check_pgt_cache() do { } while (0) -#ifdef DEBUG_TLB - -/* DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa +/* + * DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa * ISA and exist only for test purposes.. * You may find it helpful for MMU debugging, however. * @@ -193,8 +197,6 @@ static inline unsigned long read_itlb_translation (int way) return tmp; } -#endif /* DEBUG_TLB */ - - +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ -#endif /* _XTENSA_PGALLOC_H */ +#endif /* _XTENSA_TLBFLUSH_H */ diff --git a/include/asm-xtensa/variant-fsf/core.h b/include/asm-xtensa/variant-fsf/core.h new file mode 100644 index 00000000000..2f337605c74 --- /dev/null +++ b/include/asm-xtensa/variant-fsf/core.h @@ -0,0 +1,359 @@ +/* + * Xtensa processor core configuration information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2006 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_H +#define _XTENSA_CORE_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 1 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 0 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 0 /* SEXT instruction */ +#define XCHAL_HAVE_CLAMPS 0 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 0 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 0 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 0 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 0 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ +#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* floating point pkg */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ + +#define XCHAL_CORE_ID "fsf" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00006700 /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC103C3FF /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x0C006700 /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX2.0.0" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2200 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 0 /* minor ver# of targeted hw */ +#define XTHAL_HW_REL_LX2 1 +#define XTHAL_HW_REL_LX2_0 1 +#define XTHAL_HW_REL_LX2_0_0 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2200 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 0 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2200 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 0 /* minor v of latest tgt hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 16 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 4 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 8192 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 8192 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 8 +#define XCHAL_DCACHE_SETWIDTH 8 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 2 +#define XCHAL_DCACHE_WAYS 2 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Number of encoded cache attr bits (see for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 0 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 10 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 1 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_MASK 0x00008902 +#define XCHAL_INTLEVEL3_MASK 0x00011204 +#define XCHAL_INTLEVEL4_MASK 0x00000000 +#define XCHAL_INTLEVEL5_MASK 0x00000000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00000000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 2 +#define XCHAL_INT2_LEVEL 3 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 1 +#define XCHAL_INT11_LEVEL 2 +#define XCHAL_INT12_LEVEL 3 +#define XCHAL_INT13_LEVEL 1 +#define XCHAL_INT14_LEVEL 1 +#define XCHAL_INT15_LEVEL 2 +#define XCHAL_INT16_LEVEL 3 +#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 0 /* OCD external db interrupt */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F +#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00 +#define XCHAL_INTTYPE_MASK_NMI 0x00000000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 10 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 11 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 12 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +/* (There are many interrupts each at level(s) 1, 2, 3.) */ + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ +#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ +#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ + +#define XCHAL_RESET_VECTOR_VADDR 0xFE000020 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000020 +#define XCHAL_USER_VECTOR_VADDR 0xD0000220 +#define XCHAL_USER_VECTOR_PADDR 0x00000220 +#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290 +#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520 +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ +#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ +#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/include/asm-xtensa/variant-fsf/tie.h b/include/asm-xtensa/variant-fsf/tie.h new file mode 100644 index 00000000000..a73c7166491 --- /dev/null +++ b/include/asm-xtensa/variant-fsf/tie.h @@ -0,0 +1,22 @@ +/* + * Xtensa processor core configuration information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2006 Tensilica Inc. + */ + +#ifndef XTENSA_TIE_H +#define XTENSA_TIE_H + +/*---------------------------------------------------------------------- + COPROCESSORS and EXTRA STATE + ----------------------------------------------------------------------*/ + +#define XCHAL_CP_NUM 0 /* number of coprocessors */ +#define XCHAL_CP_MASK 0x00 + +#endif /*XTENSA_CONFIG_TIE_H*/ + diff --git a/include/asm-xtensa/xtensa/cacheasm.h b/include/asm-xtensa/xtensa/cacheasm.h deleted file mode 100644 index 0cdbb0bf180..00000000000 --- a/include/asm-xtensa/xtensa/cacheasm.h +++ /dev/null @@ -1,708 +0,0 @@ -#ifndef XTENSA_CACHEASM_H -#define XTENSA_CACHEASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/cacheasm.h -- assembler-specific cache - * related definitions that depend on CORE configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include - - -/* - * This header file defines assembler macros of the form: - * cache_ - * where is 'i' or 'd' for instruction and data caches, - * and indicates the function of the macro. - * - * The following functions are defined, - * and apply only to the specified cache (I or D): - * - * reset - * Resets the cache. - * - * sync - * Makes sure any previous cache instructions have been completed; - * ie. makes sure any previous cache control operations - * have had full effect and been synchronized to memory. - * Eg. any invalidate completed [so as not to generate a hit], - * any writebacks or other pipelined writes written to memory, etc. - * - * invalidate_line (single cache line) - * invalidate_region (specified memory range) - * invalidate_all (entire cache) - * Invalidates all cache entries that cache - * data from the specified memory range. - * NOTE: locked entries are not invalidated. - * - * writeback_line (single cache line) - * writeback_region (specified memory range) - * writeback_all (entire cache) - * Writes back to memory all dirty cache entries - * that cache data from the specified memory range, - * and marks these entries as clean. - * NOTE: on some future implementations, this might - * also invalidate. - * NOTE: locked entries are written back, but never invalidated. - * NOTE: instruction caches never implement writeback. - * - * writeback_inv_line (single cache line) - * writeback_inv_region (specified memory range) - * writeback_inv_all (entire cache) - * Writes back to memory all dirty cache entries - * that cache data from the specified memory range, - * and invalidates these entries (including all clean - * cache entries that cache data from that range). - * NOTE: locked entries are written back but not invalidated. - * NOTE: instruction caches never implement writeback. - * - * lock_line (single cache line) - * lock_region (specified memory range) - * Prefetch and lock the specified memory range into cache. - * NOTE: if any part of the specified memory range cannot - * be locked, a ??? exception occurs. These macros don't - * do anything special (yet anyway) to handle this situation. - * - * unlock_line (single cache line) - * unlock_region (specified memory range) - * unlock_all (entire cache) - * Unlock cache entries that cache the specified memory range. - * Entries not already locked are unaffected. - */ - - - -/*************************** GENERIC -- ALL CACHES ***************************/ - - -/* - * The following macros assume the following cache size/parameter limits - * in the current Xtensa core implementation: - * cache size: 1024 bytes minimum - * line size: 16 - 64 bytes - * way count: 1 - 4 - * - * Minimum entries per way (ie. per associativity) = 1024 / 64 / 4 = 4 - * Hence the assumption that each loop can execute four cache instructions. - * - * Correspondingly, the offset range of instructions is assumed able to cover - * four lines, ie. offsets {0,1,2,3} * line_size are assumed valid for - * both hit and indexed cache instructions. Ie. these offsets are all - * valid: 0, 16, 32, 48, 64, 96, 128, 192 (for line sizes 16, 32, 64). - * This is true of all original cache instructions - * (dhi, ihi, dhwb, dhwbi, dii, iii) which have offsets - * of 0 to 1020 in multiples of 4 (ie. 8 bits shifted by 2). - * This is also true of subsequent cache instructions - * (dhu, ihu, diu, iiu, diwb, diwbi, dpfl, ipfl) which have offsets - * of 0 to 240 in multiples of 16 (ie. 4 bits shifted by 4). - * - * (Maximum cache size, currently 32k, doesn't affect the following macros. - * Cache ways > MMU min page size cause aliasing but that's another matter.) - */ - - - -/* - * Macro to apply an 'indexed' cache instruction to the entire cache. - * - * Parameters: - * cainst instruction/ that takes an address register parameter - * and an offset parameter (in range 0 .. 3*linesize). - * size size of cache in bytes - * linesize size of cache line in bytes - * assoc_or1 number of associativities (ways/sets) in cache - * if all sets affected by cainst, - * or 1 if only one set (or not all sets) of the cache - * is affected by cainst (eg. DIWB or DIWBI [not yet ISA defined]). - * aa, ab unique address registers (temporaries) - */ - - .macro cache_index_all cainst, size, linesize, assoc_or1, aa, ab - - // Sanity-check on cache parameters: - .ifne (\size % (\linesize * \assoc_or1 * 4)) - .err // cache configuration outside expected/supported range! - .endif - - // \size byte cache, \linesize byte lines, \assoc_or1 way(s) affected by each \cainst. - movi \aa, (\size / (\linesize * \assoc_or1 * 4)) - // Possible improvement: need only loop if \aa > 1 ; - // however that particular condition is highly unlikely. - movi \ab, 0 // to iterate over cache - floop \aa, cachex\@ - \cainst \ab, 0*\linesize - \cainst \ab, 1*\linesize - \cainst \ab, 2*\linesize - \cainst \ab, 3*\linesize - addi \ab, \ab, 4*\linesize // move to next line - floopend \aa, cachex\@ - - .endm - - -/* - * Macro to apply a 'hit' cache instruction to a memory region, - * ie. to any cache entries that cache a specified portion (region) of memory. - * Takes care of the unaligned cases, ie. may apply to one - * more cache line than $asize / lineSize if $aaddr is not aligned. - * - * - * Parameters are: - * cainst instruction/macro that takes an address register parameter - * and an offset parameter (currently always zero) - * and generates a cache instruction (eg. "dhi", "dhwb", "ihi", etc.) - * linesize_log2 log2(size of cache line in bytes) - * addr register containing start address of region (clobbered) - * asize register containing size of the region in bytes (clobbered) - * askew unique register used as temporary - * - * !?!?! 2DO: optimization: iterate max(cache_size and \asize) / linesize - */ - - .macro cache_hit_region cainst, linesize_log2, addr, asize, askew - - // Make \asize the number of iterations: - extui \askew, \addr, 0, \linesize_log2 // get unalignment amount of \addr - add \asize, \asize, \askew // ... and add it to \asize - addi \asize, \asize, (1 << \linesize_log2) - 1 // round up! - srli \asize, \asize, \linesize_log2 - - // Iterate over region: - floopnez \asize, cacheh\@ - \cainst \addr, 0 - addi \addr, \addr, (1 << \linesize_log2) // move to next line - floopend \asize, cacheh\@ - - .endm - - - - - -/*************************** INSTRUCTION CACHE ***************************/ - - -/* - * Reset/initialize the instruction cache by simply invalidating it: - * (need to unlock first also, if cache locking implemented): - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro icache_reset aa, ab - icache_unlock_all \aa, \ab - icache_invalidate_all \aa, \ab - .endm - - -/* - * Synchronize after an instruction cache operation, - * to be sure everything is in sync with memory as to be - * expected following any previous instruction cache control operations. - * - * Parameters are: - * ar an address register (temporary) (currently unused, but may be used in future) - */ - .macro icache_sync ar -#if XCHAL_ICACHE_SIZE > 0 - isync -#endif - .endm - - - -/* - * Invalidate a single line of the instruction cache. - * Parameters are: - * ar address register that contains (virtual) address to invalidate - * (may get clobbered in a future implementation, but not currently) - * offset (optional) offset to add to \ar to compute effective address to invalidate - * (note: some number of lsbits are ignored) - */ - .macro icache_invalidate_line ar, offset -#if XCHAL_ICACHE_SIZE > 0 - ihi \ar, \offset // invalidate icache line - /* - * NOTE: in some version of the silicon [!!!SHOULD HAVE BEEN DOCUMENTED!!!] - * 'ihi' doesn't work, so it had been replaced with 'iii' - * (which would just invalidate more than it should, - * which should be okay other than the performance hit - * because cache locking did not exist in that version, - * unless user somehow relies on something being cached). - * [WHAT VERSION IS IT!!?!? - * IS THERE ANY WAY TO TEST FOR THAT HERE, TO OUTPUT 'III' ONLY IF NEEDED!?!?]. - * - * iii \ar, \offset - */ - icache_sync \ar -#endif - .endm - - - - -/* - * Invalidate instruction cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro icache_invalidate_region astart, asize, ac -#if XCHAL_ICACHE_SIZE > 0 - // Instruction cache region invalidation: - cache_hit_region ihi, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac - icache_sync \ac - // End of instruction cache region invalidation -#endif - .endm - - - -/* - * Invalidate entire instruction cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro icache_invalidate_all aa, ab -#if XCHAL_ICACHE_SIZE > 0 - // Instruction cache invalidation: - cache_index_all iii, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, XCHAL_ICACHE_WAYS, \aa, \ab - icache_sync \aa - // End of instruction cache invalidation -#endif - .endm - - - -/* - * Lock (prefetch & lock) a single line of the instruction cache. - * - * Parameters are: - * ar address register that contains (virtual) address to lock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to lock - * (note: some number of lsbits are ignored) - */ - .macro icache_lock_line ar, offset -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - ipfl \ar, \offset /* prefetch and lock icache line */ - icache_sync \ar -#endif - .endm - - - -/* - * Lock (prefetch & lock) a specified portion of memory into the instruction cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro icache_lock_region astart, asize, ac -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - // Instruction cache region lock: - cache_hit_region ipfl, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac - icache_sync \ac - // End of instruction cache region lock -#endif - .endm - - - -/* - * Unlock a single line of the instruction cache. - * - * Parameters are: - * ar address register that contains (virtual) address to unlock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to unlock - * (note: some number of lsbits are ignored) - */ - .macro icache_unlock_line ar, offset -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - ihu \ar, \offset /* unlock icache line */ - icache_sync \ar -#endif - .endm - - - -/* - * Unlock a specified portion of memory from the instruction cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro icache_unlock_region astart, asize, ac -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - // Instruction cache region unlock: - cache_hit_region ihu, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac - icache_sync \ac - // End of instruction cache region unlock -#endif - .endm - - - -/* - * Unlock entire instruction cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro icache_unlock_all aa, ab -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - // Instruction cache unlock: - cache_index_all iiu, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, 1, \aa, \ab - icache_sync \aa - // End of instruction cache unlock -#endif - .endm - - - - - -/*************************** DATA CACHE ***************************/ - - - -/* - * Reset/initialize the data cache by simply invalidating it - * (need to unlock first also, if cache locking implemented): - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_reset aa, ab - dcache_unlock_all \aa, \ab - dcache_invalidate_all \aa, \ab - .endm - - - - -/* - * Synchronize after a data cache operation, - * to be sure everything is in sync with memory as to be - * expected following any previous data cache control operations. - * - * Parameters are: - * ar an address register (temporary) (currently unused, but may be used in future) - */ - .macro dcache_sync ar -#if XCHAL_DCACHE_SIZE > 0 - // This previous sequence errs on the conservative side (too much so); a DSYNC should be sufficient: - //memw // synchronize data cache changes relative to subsequent memory accesses - //isync // be conservative and ISYNC as well (just to be sure) - - dsync -#endif - .endm - - - -/* - * Synchronize after a data store operation, - * to be sure the stored data is completely off the processor - * (and assuming there is no buffering outside the processor, - * that the data is in memory). This may be required to - * ensure that the processor's write buffers are emptied. - * A MEMW followed by a read guarantees this, by definition. - * We also try to make sure the read itself completes. - * - * Parameters are: - * ar an address register (temporary) - */ - .macro write_sync ar - memw // ensure previous memory accesses are complete prior to subsequent memory accesses - l32i \ar, sp, 0 // completing this read ensures any previous write has completed, because of MEMW - //slot - add \ar, \ar, \ar // use the result of the read to help ensure the read completes (in future architectures) - .endm - - -/* - * Invalidate a single line of the data cache. - * Parameters are: - * ar address register that contains (virtual) address to invalidate - * (may get clobbered in a future implementation, but not currently) - * offset (optional) offset to add to \ar to compute effective address to invalidate - * (note: some number of lsbits are ignored) - */ - .macro dcache_invalidate_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 - dhi \ar, \offset - dcache_sync \ar -#endif - .endm - - - - - -/* - * Invalidate data cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_invalidate_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 - // Data cache region invalidation: - cache_hit_region dhi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region invalidation -#endif - .endm - - - -#if 0 -/* - * This is a work-around for a bug in SiChip1 (???). - * There should be a proper mechanism for not outputting - * these instructions when not needed. - * To enable work-around, uncomment this and replace 'dii' - * with 'dii_s1' everywhere, eg. in dcache_invalidate_all - * macro below. - */ - .macro dii_s1 ar, offset - dii \ar, \offset - or \ar, \ar, \ar - or \ar, \ar, \ar - or \ar, \ar, \ar - or \ar, \ar, \ar - .endm -#endif - - -/* - * Invalidate entire data cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_invalidate_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 - // Data cache invalidation: - cache_index_all dii, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, XCHAL_DCACHE_WAYS, \aa, \ab - dcache_sync \aa - // End of data cache invalidation -#endif - .endm - - - -/* - * Writeback a single line of the data cache. - * Parameters are: - * ar address register that contains (virtual) address to writeback - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to writeback - * (note: some number of lsbits are ignored) - */ - .macro dcache_writeback_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK - dhwb \ar, \offset - dcache_sync \ar -#endif - .endm - - - -/* - * Writeback dirty data cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_writeback_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK - // Data cache region writeback: - cache_hit_region dhwb, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region writeback -#endif - .endm - - - -/* - * Writeback entire data cache. - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_writeback_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK - // Data cache writeback: - cache_index_all diwb, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab - dcache_sync \aa - // End of data cache writeback -#endif - .endm - - - -/* - * Writeback and invalidate a single line of the data cache. - * Parameters are: - * ar address register that contains (virtual) address to writeback and invalidate - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to writeback and invalidate - * (note: some number of lsbits are ignored) - */ - .macro dcache_writeback_inv_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 - dhwbi \ar, \offset /* writeback and invalidate dcache line */ - dcache_sync \ar -#endif - .endm - - - -/* - * Writeback and invalidate data cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_writeback_inv_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 - // Data cache region writeback and invalidate: - cache_hit_region dhwbi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region writeback and invalidate -#endif - .endm - - - -/* - * Writeback and invalidate entire data cache. - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_writeback_inv_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 - // Data cache writeback and invalidate: -#if XCHAL_DCACHE_IS_WRITEBACK - cache_index_all diwbi, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab - dcache_sync \aa -#else /*writeback*/ - // Data cache does not support writeback, so just invalidate: */ - dcache_invalidate_all \aa, \ab -#endif /*writeback*/ - // End of data cache writeback and invalidate -#endif - .endm - - - - -/* - * Lock (prefetch & lock) a single line of the data cache. - * - * Parameters are: - * ar address register that contains (virtual) address to lock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to lock - * (note: some number of lsbits are ignored) - */ - .macro dcache_lock_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - dpfl \ar, \offset /* prefetch and lock dcache line */ - dcache_sync \ar -#endif - .endm - - - -/* - * Lock (prefetch & lock) a specified portion of memory into the data cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_lock_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - // Data cache region lock: - cache_hit_region dpfl, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region lock -#endif - .endm - - - -/* - * Unlock a single line of the data cache. - * - * Parameters are: - * ar address register that contains (virtual) address to unlock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to unlock - * (note: some number of lsbits are ignored) - */ - .macro dcache_unlock_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - dhu \ar, \offset /* unlock dcache line */ - dcache_sync \ar -#endif - .endm - - - -/* - * Unlock a specified portion of memory from the data cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_unlock_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - // Data cache region unlock: - cache_hit_region dhu, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region unlock -#endif - .endm - - - -/* - * Unlock entire data cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_unlock_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - // Data cache unlock: - cache_index_all diu, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab - dcache_sync \aa - // End of data cache unlock -#endif - .endm - - -#endif /*XTENSA_CACHEASM_H*/ - diff --git a/include/asm-xtensa/xtensa/cacheattrasm.h b/include/asm-xtensa/xtensa/cacheattrasm.h deleted file mode 100644 index 1c3e117b359..00000000000 --- a/include/asm-xtensa/xtensa/cacheattrasm.h +++ /dev/null @@ -1,432 +0,0 @@ -#ifndef XTENSA_CACHEATTRASM_H -#define XTENSA_CACHEATTRASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/cacheattrasm.h -- assembler-specific - * CACHEATTR register related definitions that depend on CORE - * configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include - - -/* - * This header file defines assembler macros of the form: - * cacheattr_ - * where: - * is 'i', 'd' or absent for instruction, data - * or both caches; and - * indicates the function of the macro. - * - * The following functions are defined: - * - * icacheattr_get - * Reads I-cache CACHEATTR into a2 (clobbers a3-a5). - * - * dcacheattr_get - * Reads D-cache CACHEATTR into a2 (clobbers a3-a5). - * (Note: for configs with a real CACHEATTR register, the - * above two macros are identical.) - * - * cacheattr_set - * Writes both I-cache and D-cache CACHEATTRs from a2 (a3-a8 clobbered). - * Works even when changing one's own code's attributes. - * - * icacheattr_is_enabled label - * Branches to \label if I-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * dcacheattr_is_enabled label - * Branches to \label if D-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * cacheattr_is_enabled label - * Branches to \label if either I-cache or D-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * The following macros are only defined under certain conditions: - * - * icacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) - * Writes I-cache CACHEATTR from a2 (a3-a8 clobbered). - * - * dcacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) - * Writes D-cache CACHEATTR from a2 (a3-a8 clobbered). - */ - - - -/*************************** GENERIC -- ALL CACHES ***************************/ - -/* - * _cacheattr_get - * - * (Internal macro.) - * Returns value of CACHEATTR register (or closest equivalent) in a2. - * - * Entry: - * (none) - * Exit: - * a2 value read from CACHEATTR - * a3-a5 clobbered (temporaries) - */ - .macro _cacheattr_get tlb -#if XCHAL_HAVE_CACHEATTR - rsr a2, CACHEATTR -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // We have a config that "mimics" CACHEATTR using a simplified - // "MMU" composed of a single statically-mapped way. - // DTLB and ITLB are independent, so there's no single - // cache attribute that can describe both. So for now - // just return the DTLB state. - movi a5, 0xE0000000 - movi a2, 0 - movi a3, 0 -1: add a3, a3, a5 // next segment - r&tlb&1 a4, a3 // get PPN+CA of segment at 0xE0000000, 0xC0000000, ..., 0 - dsync // interlock??? - slli a2, a2, 4 - extui a4, a4, 0, 4 // extract CA - or a2, a2, a4 - bnez a3, 1b -#else - // This macro isn't applicable to arbitrary MMU configurations. - // Just return zero. - movi a2, 0 -#endif - .endm - - .macro icacheattr_get - _cacheattr_get itlb - .endm - - .macro dcacheattr_get - _cacheattr_get dtlb - .endm - - -#define XCHAL_CACHEATTR_ALL_BYPASS 0x22222222 /* default (powerup/reset) value of CACHEATTR, all BYPASS - mode (ie. disabled/bypassed caches) */ - -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - -#define XCHAL_FCA_ENAMASK 0x001A /* bitmap of fetch attributes that require enabled icache */ -#define XCHAL_LCA_ENAMASK 0x0003 /* bitmap of load attributes that require enabled dcache */ -#define XCHAL_SCA_ENAMASK 0x0003 /* bitmap of store attributes that require enabled dcache */ -#define XCHAL_LSCA_ENAMASK (XCHAL_LCA_ENAMASK|XCHAL_SCA_ENAMASK) /* l/s attrs requiring enabled dcache */ -#define XCHAL_ALLCA_ENAMASK (XCHAL_FCA_ENAMASK|XCHAL_LSCA_ENAMASK) /* all attrs requiring enabled caches */ - -/* - * _cacheattr_is_enabled - * - * (Internal macro.) - * Branches to \label if CACHEATTR in a2 indicates an enabled - * cache, using mask in a3. - * - * Parameters: - * label where to branch to if cache is enabled - * Entry: - * a2 contains CACHEATTR value used to determine whether - * caches are enabled - * a3 16-bit constant where each bit correspond to - * one of the 16 possible CA values (in a CACHEATTR mask); - * CA values that indicate the cache is enabled - * have their corresponding bit set in this mask - * (eg. use XCHAL_xCA_ENAMASK , above) - * Exit: - * a2,a4,a5 clobbered - * SAR clobbered - */ - .macro _cacheattr_is_enabled label - movi a4, 8 // loop 8 times -.Lcaife\@: - extui a5, a2, 0, 4 // get CA nibble - ssr a5 // index into mask according to CA... - srl a5, a3 // ...and get CA's mask bit in a5 bit 0 - bbsi.l a5, 0, \label // if CA indicates cache enabled, jump to label - srli a2, a2, 4 // next nibble - addi a4, a4, -1 - bnez a4, .Lcaife\@ // loop for each nibble - .endm - -#else /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - .macro _cacheattr_is_enabled label - j \label // macro not applicable, assume caches always enabled - .endm -#endif /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - - - -/* - * icacheattr_is_enabled - * - * Branches to \label if I-cache is enabled. - * - * Parameters: - * label where to branch to if icache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro icacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - icacheattr_get - movi a3, XCHAL_FCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - -/* - * dcacheattr_is_enabled - * - * Branches to \label if D-cache is enabled. - * - * Parameters: - * label where to branch to if dcache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro dcacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - dcacheattr_get - movi a3, XCHAL_LSCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - -/* - * cacheattr_is_enabled - * - * Branches to \label if either I-cache or D-cache is enabled. - * - * Parameters: - * label where to branch to if a cache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro cacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR - rsr a2, CACHEATTR - movi a3, XCHAL_ALLCA_ENAMASK -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - icacheattr_get - movi a3, XCHAL_FCA_ENAMASK - _cacheattr_is_enabled \label - dcacheattr_get - movi a3, XCHAL_LSCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - - - -/* - * The ISA does not have a defined way to change the - * instruction cache attributes of the running code, - * ie. of the memory area that encloses the current PC. - * However, each micro-architecture (or class of - * configurations within a micro-architecture) - * provides a way to deal with this issue. - * - * Here are a few macros used to implement the relevant - * approach taken. - */ - -#if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // We have a config that "mimics" CACHEATTR using a simplified - // "MMU" composed of a single statically-mapped way. - -/* - * icacheattr_set - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - .macro icacheattr_set - - movi a5, 0xE0000000 // mask of upper 3 bits - movi a6, 3f // PC where ITLB is set - movi a3, 0 // start at region 0 (0 .. 7) - and a6, a6, a5 // upper 3 bits of local PC area - mov a7, a2 // copy a2 so it doesn't get clobbered - j 3f - -# if XCHAL_HAVE_XLT_CACHEATTR - // Can do translations, use generic method: -1: sub a6, a3, a5 // address of some other segment - ritlb1 a8, a6 // save its PPN+CA - dsync // interlock?? - witlb a4, a6 // make it translate to this code area - movi a6, 5f // where to jump into it - isync - sub a6, a6, a5 // adjust jump address within that other segment - jx a6 - - // Note that in the following code snippet, which runs at a different virtual - // address than it is assembled for, we avoid using literals (eg. via movi/l32r) - // just in case literals end up in a different 512 MB segment, and we avoid - // instructions that rely on the current PC being what is expected. - // - .align 4 - _j 6f // this is at label '5' minus 4 bytes - .align 4 -5: witlb a4, a3 // we're in other segment, now can write previous segment's CA - isync - add a6, a6, a5 // back to previous segment - addi a6, a6, -4 // next jump label - jx a6 - -6: sub a6, a3, a5 // address of some other segment - witlb a8, a6 // restore PPN+CA of other segment - mov a6, a3 // restore a6 - isync -# else /* XCHAL_HAVE_XLT_CACHEATTR */ - // Use micro-architecture specific method. - // The following 4-instruction sequence is aligned such that - // it all fits within a single I-cache line. Sixteen byte - // alignment is sufficient for this (using XCHAL_ICACHE_LINESIZE - // actually causes problems because that can be greater than - // the alignment of the reset vector, where this macro is often - // invoked, which would cause the linker to align the reset - // vector code away from the reset vector!!). - .align 16 /*XCHAL_ICACHE_LINESIZE*/ -1: _witlb a4, a3 // write wired PTE (CA, no PPN) of 512MB segment to ITLB - _isync - nop - nop -# endif /* XCHAL_HAVE_XLT_CACHEATTR */ - beq a3, a5, 4f // done? - - // Note that in the WITLB loop, we don't do any load/stores - // (may not be an issue here, but it is important in the DTLB case). -2: srli a7, a7, 4 // next CA - sub a3, a3, a5 // next segment (add 0x20000000) -3: -# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ - ritlb1 a8, a3 // get current PPN+CA of segment - dsync // interlock??? - extui a4, a7, 0, 4 // extract CA to set - srli a8, a8, 4 // clear CA but keep PPN ... - slli a8, a8, 4 // ... - add a4, a4, a8 // combine new CA with PPN to preserve -# else - extui a4, a7, 0, 4 // extract CA -# endif - beq a3, a6, 1b // current PC's region? if so, do it in a safe way - witlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to ITLB - bne a3, a5, 2b - isync // make sure all ifetch changes take effect -4: - .endm // icacheattr_set - - -/* - * dcacheattr_set - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - - .macro dcacheattr_set - - movi a5, 0xE0000000 // mask of upper 3 bits - movi a3, 0 // start at region 0 (0 .. 7) - mov a7, a2 // copy a2 so it doesn't get clobbered - j 3f - // Note that in the WDTLB loop, we don't do any load/stores - // (including implicit l32r via movi) because it isn't safe. -2: srli a7, a7, 4 // next CA - sub a3, a3, a5 // next segment (add 0x20000000) -3: -# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ - rdtlb1 a8, a3 // get current PPN+CA of segment - dsync // interlock??? - extui a4, a7, 0, 4 // extract CA to set - srli a8, a8, 4 // clear CA but keep PPN ... - slli a8, a8, 4 // ... - add a4, a4, a8 // combine new CA with PPN to preserve -# else - extui a4, a7, 0, 4 // extract CA to set -# endif - wdtlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to DTLB - bne a3, a5, 2b - dsync // make sure all data path changes take effect - .endm // dcacheattr_set - -#endif /* XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - - - -/* - * cacheattr_set - * - * Macro that sets the current CACHEATTR safely - * (both i and d) according to the current contents of a2. - * It works even when changing the cache attributes of - * the currently running code. - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - .macro cacheattr_set - -#if XCHAL_HAVE_CACHEATTR -# if XCHAL_ICACHE_LINESIZE < 4 - // No i-cache, so can always safely write to CACHEATTR: - wsr a2, CACHEATTR -# else - // The Athens micro-architecture, when using the old - // exception architecture option (ie. with the CACHEATTR register) - // allows changing the cache attributes of the running code - // using the following exact sequence aligned to be within - // an instruction cache line. (NOTE: using XCHAL_ICACHE_LINESIZE - // alignment actually causes problems because that can be greater - // than the alignment of the reset vector, where this macro is often - // invoked, which would cause the linker to align the reset - // vector code away from the reset vector!!). - j 1f - .align 16 /*XCHAL_ICACHE_LINESIZE*/ // align to within an I-cache line -1: _wsr a2, CACHEATTR - _isync - nop - nop -# endif -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // DTLB and ITLB are independent, but to keep semantics - // of this macro we simply write to both. - icacheattr_set - dcacheattr_set -#else - // This macro isn't applicable to arbitrary MMU configurations. - // Do nothing in this case. -#endif - .endm - - -#endif /*XTENSA_CACHEATTRASM_H*/ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/core.h b/include/asm-xtensa/xtensa/config-linux_be/core.h deleted file mode 100644 index d54fe5eb106..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/core.h +++ /dev/null @@ -1,1270 +0,0 @@ -/* - * xtensa/config/core.h -- HAL definitions that are dependent on CORE configuration - * - * This header file is sometimes referred to as the "compile-time HAL" or CHAL. - * It was generated for a specific Xtensa processor configuration. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * It is perfectly normal, however, for the HAL source itself to include this file. - */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - - -#ifndef XTENSA_CONFIG_CORE_H -#define XTENSA_CONFIG_CORE_H - -#include - - -/*---------------------------------------------------------------------- - GENERAL - ----------------------------------------------------------------------*/ - -/* - * Separators for macros that expand into arrays. - * These can be predefined by files that #include this one, - * when different separators are required. - */ -/* Element separator for macros that expand into 1-dimensional arrays: */ -#ifndef XCHAL_SEP -#define XCHAL_SEP , -#endif -/* Array separator for macros that expand into 2-dimensional arrays: */ -#ifndef XCHAL_SEP2 -#define XCHAL_SEP2 },{ -#endif - - -/*---------------------------------------------------------------------- - ENDIANNESS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_BE 1 -#define XCHAL_HAVE_LE 0 -#define XCHAL_MEMORY_ORDER XTHAL_BIGENDIAN - - -/*---------------------------------------------------------------------- - REGISTER WINDOWS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_WINDOWED 1 /* 1 if windowed registers option configured, 0 otherwise */ -#define XCHAL_NUM_AREGS 64 /* number of physical address regs */ -#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ - - -/*---------------------------------------------------------------------- - ADDRESS ALIGNMENT - ----------------------------------------------------------------------*/ - -/* These apply to a selected set of core load and store instructions only (see ISA): */ -#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* 1 if unaligned loads cause an exception, 0 otherwise */ -#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* 1 if unaligned stores cause an exception, 0 otherwise */ - - -/*---------------------------------------------------------------------- - INTERRUPTS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_INTERRUPTS 1 /* 1 if interrupt option configured, 0 otherwise */ -#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* 1 if high-priority interrupt option configured, 0 otherwise */ -#define XCHAL_HAVE_HIGHLEVEL_INTERRUPTS XCHAL_HAVE_HIGHPRI_INTERRUPTS -#define XCHAL_HAVE_NMI 0 /* 1 if NMI option configured, 0 otherwise */ -#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */ -#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* number of bits to hold an interrupt number: roundup(log2(number of interrupts)) */ -#define XCHAL_NUM_EXTINTERRUPTS 10 /* number of external interrupts */ -#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels (not including level zero!) */ -#define XCHAL_NUM_LOWPRI_LEVELS 1 /* number of low-priority interrupt levels (always 1) */ -#define XCHAL_FIRST_HIGHPRI_LEVEL (XCHAL_NUM_LOWPRI_LEVELS+1) /* level of first high-priority interrupt (always 2) */ -#define XCHAL_EXCM_LEVEL 1 /* level of interrupts masked by PS.EXCM (XEA2 only; always 1 in T10xx); - for XEA1, where there is no PS.EXCM, this is always 1; - interrupts at levels FIRST_HIGHPRI <= n <= EXCM_LEVEL, if any, - are termed "medium priority" interrupts (post T10xx only) */ -/* Note: 1 <= LOWPRI_LEVELS <= EXCM_LEVEL < DEBUGLEVEL <= NUM_INTLEVELS < NMILEVEL <= 15 */ - -/* Masks of interrupts at each interrupt level: */ -#define XCHAL_INTLEVEL0_MASK 0x00000000 -#define XCHAL_INTLEVEL1_MASK 0x000064F9 -#define XCHAL_INTLEVEL2_MASK 0x00008902 -#define XCHAL_INTLEVEL3_MASK 0x00011204 -#define XCHAL_INTLEVEL4_MASK 0x00000000 -#define XCHAL_INTLEVEL5_MASK 0x00000000 -#define XCHAL_INTLEVEL6_MASK 0x00000000 -#define XCHAL_INTLEVEL7_MASK 0x00000000 -#define XCHAL_INTLEVEL8_MASK 0x00000000 -#define XCHAL_INTLEVEL9_MASK 0x00000000 -#define XCHAL_INTLEVEL10_MASK 0x00000000 -#define XCHAL_INTLEVEL11_MASK 0x00000000 -#define XCHAL_INTLEVEL12_MASK 0x00000000 -#define XCHAL_INTLEVEL13_MASK 0x00000000 -#define XCHAL_INTLEVEL14_MASK 0x00000000 -#define XCHAL_INTLEVEL15_MASK 0x00000000 -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INTLEVEL_MASKS 0x00000000 XCHAL_SEP \ - 0x000064F9 XCHAL_SEP \ - 0x00008902 XCHAL_SEP \ - 0x00011204 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 - -/* Masks of interrupts at each range 1..n of interrupt levels: */ -#define XCHAL_INTLEVEL0_ANDBELOW_MASK 0x00000000 -#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9 -#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB -#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL8_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL9_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL10_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL11_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL12_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL13_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL14_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL15_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_LOWPRI_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all low-priority interrupts */ -#define XCHAL_EXCM_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all interrupts masked by PS.EXCM (or CEXCM) */ -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INTLEVEL_ANDBELOW_MASKS 0x00000000 XCHAL_SEP \ - 0x000064F9 XCHAL_SEP \ - 0x0000EDFB XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF - -/* Interrupt numbers for each interrupt level at which only one interrupt was configured: */ -/*#define XCHAL_INTLEVEL1_NUM ...more than one interrupt at this level...*/ -/*#define XCHAL_INTLEVEL2_NUM ...more than one interrupt at this level...*/ -/*#define XCHAL_INTLEVEL3_NUM ...more than one interrupt at this level...*/ - -/* Level of each interrupt: */ -#define XCHAL_INT0_LEVEL 1 -#define XCHAL_INT1_LEVEL 2 -#define XCHAL_INT2_LEVEL 3 -#define XCHAL_INT3_LEVEL 1 -#define XCHAL_INT4_LEVEL 1 -#define XCHAL_INT5_LEVEL 1 -#define XCHAL_INT6_LEVEL 1 -#define XCHAL_INT7_LEVEL 1 -#define XCHAL_INT8_LEVEL 2 -#define XCHAL_INT9_LEVEL 3 -#define XCHAL_INT10_LEVEL 1 -#define XCHAL_INT11_LEVEL 2 -#define XCHAL_INT12_LEVEL 3 -#define XCHAL_INT13_LEVEL 1 -#define XCHAL_INT14_LEVEL 1 -#define XCHAL_INT15_LEVEL 2 -#define XCHAL_INT16_LEVEL 3 -#define XCHAL_INT17_LEVEL 0 -#define XCHAL_INT18_LEVEL 0 -#define XCHAL_INT19_LEVEL 0 -#define XCHAL_INT20_LEVEL 0 -#define XCHAL_INT21_LEVEL 0 -#define XCHAL_INT22_LEVEL 0 -#define XCHAL_INT23_LEVEL 0 -#define XCHAL_INT24_LEVEL 0 -#define XCHAL_INT25_LEVEL 0 -#define XCHAL_INT26_LEVEL 0 -#define XCHAL_INT27_LEVEL 0 -#define XCHAL_INT28_LEVEL 0 -#define XCHAL_INT29_LEVEL 0 -#define XCHAL_INT30_LEVEL 0 -#define XCHAL_INT31_LEVEL 0 -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INT_LEVELS 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 - -/* Type of each interrupt: */ -#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT17_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT18_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT19_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT20_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT21_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT22_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT23_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT24_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT25_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT26_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT27_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT28_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT29_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT30_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT31_TYPE XTHAL_INTTYPE_UNCONFIGURED -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INT_TYPES XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ - XTHAL_INTTYPE_TIMER XCHAL_SEP \ - XTHAL_INTTYPE_TIMER XCHAL_SEP \ - XTHAL_INTTYPE_TIMER XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED - -/* Masks of interrupts for each type of interrupt: */ -#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000 -#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000 -#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380 -#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F -#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00 -#define XCHAL_INTTYPE_MASK_NMI 0x00000000 -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INTTYPE_MASKS 0xFFFE0000 XCHAL_SEP \ - 0x0001E000 XCHAL_SEP \ - 0x00000380 XCHAL_SEP \ - 0x0000007F XCHAL_SEP \ - 0x00001C00 XCHAL_SEP \ - 0x00000000 - -/* Interrupts assigned to each timer (CCOMPARE0 to CCOMPARE3), -1 if unassigned */ -#define XCHAL_TIMER0_INTERRUPT 10 -#define XCHAL_TIMER1_INTERRUPT 11 -#define XCHAL_TIMER2_INTERRUPT 12 -#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_TIMER_INTERRUPTS 10 XCHAL_SEP \ - 11 XCHAL_SEP \ - 12 XCHAL_SEP \ - XTHAL_TIMER_UNCONFIGURED - -/* Indexing macros: */ -#define _XCHAL_INTLEVEL_MASK(n) XCHAL_INTLEVEL ## n ## _MASK -#define XCHAL_INTLEVEL_MASK(n) _XCHAL_INTLEVEL_MASK(n) /* n = 0 .. 15 */ -#define _XCHAL_INTLEVEL_ANDBELOWMASK(n) XCHAL_INTLEVEL ## n ## _ANDBELOW_MASK -#define XCHAL_INTLEVEL_ANDBELOW_MASK(n) _XCHAL_INTLEVEL_ANDBELOWMASK(n) /* n = 0 .. 15 */ -#define _XCHAL_INT_LEVEL(n) XCHAL_INT ## n ## _LEVEL -#define XCHAL_INT_LEVEL(n) _XCHAL_INT_LEVEL(n) /* n = 0 .. 31 */ -#define _XCHAL_INT_TYPE(n) XCHAL_INT ## n ## _TYPE -#define XCHAL_INT_TYPE(n) _XCHAL_INT_TYPE(n) /* n = 0 .. 31 */ -#define _XCHAL_TIMER_INTERRUPT(n) XCHAL_TIMER ## n ## _INTERRUPT -#define XCHAL_TIMER_INTERRUPT(n) _XCHAL_TIMER_INTERRUPT(n) /* n = 0 .. 3 */ - - - -/* - * External interrupt vectors/levels. - * These macros describe how Xtensa processor interrupt numbers - * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) - * map to external BInterrupt pins, for those interrupts - * configured as external (level-triggered, edge-triggered, or NMI). - * See the Xtensa processor databook for more details. - */ - -/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ -#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ -#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */ -#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */ -#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ -#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ -#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ -#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ -#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ -#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ -#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */ - -/* Corresponding interrupt masks: */ -#define XCHAL_EXTINT0_MASK 0x00000001 -#define XCHAL_EXTINT1_MASK 0x00000002 -#define XCHAL_EXTINT2_MASK 0x00000004 -#define XCHAL_EXTINT3_MASK 0x00000008 -#define XCHAL_EXTINT4_MASK 0x00000010 -#define XCHAL_EXTINT5_MASK 0x00000020 -#define XCHAL_EXTINT6_MASK 0x00000040 -#define XCHAL_EXTINT7_MASK 0x00000080 -#define XCHAL_EXTINT8_MASK 0x00000100 -#define XCHAL_EXTINT9_MASK 0x00000200 - -/* Core config interrupt levels mapped to each external interrupt: */ -#define XCHAL_EXTINT0_LEVEL 1 /* (int number 0) */ -#define XCHAL_EXTINT1_LEVEL 2 /* (int number 1) */ -#define XCHAL_EXTINT2_LEVEL 3 /* (int number 2) */ -#define XCHAL_EXTINT3_LEVEL 1 /* (int number 3) */ -#define XCHAL_EXTINT4_LEVEL 1 /* (int number 4) */ -#define XCHAL_EXTINT5_LEVEL 1 /* (int number 5) */ -#define XCHAL_EXTINT6_LEVEL 1 /* (int number 6) */ -#define XCHAL_EXTINT7_LEVEL 1 /* (int number 7) */ -#define XCHAL_EXTINT8_LEVEL 2 /* (int number 8) */ -#define XCHAL_EXTINT9_LEVEL 3 /* (int number 9) */ - - -/*---------------------------------------------------------------------- - EXCEPTIONS and VECTORS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_EXCEPTIONS 1 /* 1 if exception option configured, 0 otherwise */ - -#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture number: 1 for XEA1 (old), 2 for XEA2 (new) */ -#define XCHAL_HAVE_XEA1 0 /* 1 if XEA1, 0 otherwise */ -#define XCHAL_HAVE_XEA2 1 /* 1 if XEA2, 0 otherwise */ -/* For backward compatibility ONLY -- DO NOT USE (will be removed in future release): */ -#define XCHAL_HAVE_OLD_EXC_ARCH XCHAL_HAVE_XEA1 /* (DEPRECATED) 1 if old exception architecture (XEA1), 0 otherwise (eg. XEA2) */ -#define XCHAL_HAVE_EXCM XCHAL_HAVE_XEA2 /* (DEPRECATED) 1 if PS.EXCM bit exists (currently equals XCHAL_HAVE_TLBS) */ - -#define XCHAL_RESET_VECTOR_VADDR 0xFE000020 -#define XCHAL_RESET_VECTOR_PADDR 0xFE000020 -#define XCHAL_USER_VECTOR_VADDR 0xD0000220 -#define XCHAL_PROGRAMEXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_USEREXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_USER_VECTOR_PADDR 0x00000220 -#define XCHAL_PROGRAMEXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_USEREXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200 -#define XCHAL_STACKEDEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_KERNELEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200 -#define XCHAL_STACKEDEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_KERNELEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290 -#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290 -#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 -#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 -#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240 -#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240 -#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250 -#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250 -#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520 -#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520 -#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR -#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR - -/* Indexing macros: */ -#define _XCHAL_INTLEVEL_VECTOR_VADDR(n) XCHAL_INTLEVEL ## n ## _VECTOR_VADDR -#define XCHAL_INTLEVEL_VECTOR_VADDR(n) _XCHAL_INTLEVEL_VECTOR_VADDR(n) /* n = 0 .. 15 */ - -/* - * General Exception Causes - * (values of EXCCAUSE special register set by general exceptions, - * which vector to the user, kernel, or double-exception vectors): - */ -#define XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION 0 /* Illegal Instruction (IllegalInstruction) */ -#define XCHAL_EXCCAUSE_SYSTEM_CALL 1 /* System Call (SystemCall) */ -#define XCHAL_EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 /* Instruction Fetch Error (InstructionFetchError) */ -#define XCHAL_EXCCAUSE_LOAD_STORE_ERROR 3 /* Load Store Error (LoadStoreError) */ -#define XCHAL_EXCCAUSE_LEVEL1_INTERRUPT 4 /* Level 1 Interrupt (Level1Interrupt) */ -#define XCHAL_EXCCAUSE_ALLOCA 5 /* Stack Extension Assist (Alloca) */ -#define XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 /* Integer Divide by Zero (IntegerDivideByZero) */ -#define XCHAL_EXCCAUSE_SPECULATION 7 /* Speculation (Speculation) */ -#define XCHAL_EXCCAUSE_PRIVILEGED 8 /* Privileged Instruction (Privileged) */ -#define XCHAL_EXCCAUSE_UNALIGNED 9 /* Unaligned Load Store (Unaligned) */ -#define XCHAL_EXCCAUSE_ITLB_MISS 16 /* ITlb Miss Exception (ITlbMiss) */ -#define XCHAL_EXCCAUSE_ITLB_MULTIHIT 17 /* ITlb Mutltihit Exception (ITlbMultihit) */ -#define XCHAL_EXCCAUSE_ITLB_PRIVILEGE 18 /* ITlb Privilege Exception (ITlbPrivilege) */ -#define XCHAL_EXCCAUSE_ITLB_SIZE_RESTRICTION 19 /* ITlb Size Restriction Exception (ITlbSizeRestriction) */ -#define XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 /* Fetch Cache Attribute Exception (FetchCacheAttribute) */ -#define XCHAL_EXCCAUSE_DTLB_MISS 24 /* DTlb Miss Exception (DTlbMiss) */ -#define XCHAL_EXCCAUSE_DTLB_MULTIHIT 25 /* DTlb Multihit Exception (DTlbMultihit) */ -#define XCHAL_EXCCAUSE_DTLB_PRIVILEGE 26 /* DTlb Privilege Exception (DTlbPrivilege) */ -#define XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION 27 /* DTlb Size Restriction Exception (DTlbSizeRestriction) */ -#define XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 /* Load Cache Attribute Exception (LoadCacheAttribute) */ -#define XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 /* Store Cache Attribute Exception (StoreCacheAttribute) */ -#define XCHAL_EXCCAUSE_FLOATING_POINT 40 /* Floating Point Exception (FloatingPoint) */ - - - -/*---------------------------------------------------------------------- - TIMERS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_CCOUNT 1 /* 1 if have CCOUNT, 0 otherwise */ -/*#define XCHAL_HAVE_TIMERS XCHAL_HAVE_CCOUNT*/ -#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ - - - -/*---------------------------------------------------------------------- - DEBUG - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_DEBUG 1 /* 1 if debug option configured, 0 otherwise */ -#define XCHAL_HAVE_OCD 1 /* 1 if OnChipDebug option configured, 0 otherwise */ -#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ -#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ -#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ -/*DebugExternalInterrupt 0 0|1*/ -/*DebugUseDIRArray 0 0|1*/ - - - - -/*---------------------------------------------------------------------- - COPROCESSORS and EXTRA STATE - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_CP 0 /* 1 if coprocessor option configured (CPENABLE present) */ -#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one (per cfg) */ - -#include - - - - -/*---------------------------------------------------------------------- - INTERNAL I/D RAM/ROMs and XLMI - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_INSTROM 0 /* number of core instruction ROMs configured */ -#define XCHAL_NUM_INSTRAM 0 /* number of core instruction RAMs configured */ -#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs configured */ -#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs configured */ -#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports configured */ -#define XCHAL_NUM_IROM XCHAL_NUM_INSTROM /* (DEPRECATED) */ -#define XCHAL_NUM_IRAM XCHAL_NUM_INSTRAM /* (DEPRECATED) */ -#define XCHAL_NUM_DROM XCHAL_NUM_DATAROM /* (DEPRECATED) */ -#define XCHAL_NUM_DRAM XCHAL_NUM_DATARAM /* (DEPRECATED) */ - - - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -/* Size of the cache lines in log2(bytes): */ -#define XCHAL_ICACHE_LINEWIDTH 4 -#define XCHAL_DCACHE_LINEWIDTH 4 -/* Size of the cache lines in bytes: */ -#define XCHAL_ICACHE_LINESIZE 16 -#define XCHAL_DCACHE_LINESIZE 16 -/* Max for both I-cache and D-cache (used for general alignment): */ -#define XCHAL_CACHE_LINEWIDTH_MAX 4 -#define XCHAL_CACHE_LINESIZE_MAX 16 - -/* Number of cache sets in log2(lines per way): */ -#define XCHAL_ICACHE_SETWIDTH 8 -#define XCHAL_DCACHE_SETWIDTH 8 -/* Max for both I-cache and D-cache (used for general cache-coherency page alignment): */ -#define XCHAL_CACHE_SETWIDTH_MAX 8 -#define XCHAL_CACHE_SETSIZE_MAX 256 - -/* Cache set associativity (number of ways): */ -#define XCHAL_ICACHE_WAYS 2 -#define XCHAL_DCACHE_WAYS 2 - -/* Size of the caches in bytes (ways * 2^(linewidth + setwidth)): */ -#define XCHAL_ICACHE_SIZE 8192 -#define XCHAL_DCACHE_SIZE 8192 - -/* Cache features: */ -#define XCHAL_DCACHE_IS_WRITEBACK 0 -/* Whether cache locking feature is available: */ -#define XCHAL_ICACHE_LINE_LOCKABLE 0 -#define XCHAL_DCACHE_LINE_LOCKABLE 0 - -/* Number of (encoded) cache attribute bits: */ -#define XCHAL_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ -/* (The number of access mode bits (decoded cache attribute bits) is defined by the architecture; see xtensa/hal.h?) */ - - -/* Cache Attribute encodings -- lists of access modes for each cache attribute: */ -#define XCHAL_FCA_LIST XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_BYPASS XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_BYPASS XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_EXCEPTION -#define XCHAL_LCA_LIST XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_BYPASSG XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_BYPASSG XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_CACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_CACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_NACACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_NACACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_ISOLATE XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_CACHED -#define XCHAL_SCA_LIST XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_BYPASS XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_WRITETHRU XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_WRITETHRU XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_ISOLATE XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_WRITETHRU - -/* Test: - read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 - read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 - all: 0 + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 - fault: 0 + 2 + 4 + 6 + 8 + 10 + 12 + 14 - r/w/x cached: - r/w/x dcached: - I-bypass: 1 + 3 - - load guard bit set: 1 + 3 - load guard bit clr: 0 + 2 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 - hit-cache r/w/x: 7 + 11 - - fams: 5 - fams: 0 / 6 / 18 / 1 / 2 - fams: Bypass / Isolate / Cached / Exception / NACached - - MMU okay: yes -*/ - - -/*---------------------------------------------------------------------- - MMU - ----------------------------------------------------------------------*/ - -/* - * General notes on MMU parameters. - * - * Terminology: - * ASID = address-space ID (acts as an "extension" of virtual addresses) - * VPN = virtual page number - * PPN = physical page number - * CA = encoded cache attribute (access modes) - * TLB = translation look-aside buffer (term is stretched somewhat here) - * I = instruction (fetch accesses) - * D = data (load and store accesses) - * way = each TLB (ITLB and DTLB) consists of a number of "ways" - * that simultaneously match the virtual address of an access; - * a TLB successfully translates a virtual address if exactly - * one way matches the vaddr; if none match, it is a miss; - * if multiple match, one gets a "multihit" exception; - * each way can be independently configured in terms of number of - * entries, page sizes, which fields are writable or constant, etc. - * set = group of contiguous ways with exactly identical parameters - * ARF = auto-refill; hardware services a 1st-level miss by loading a PTE - * from the page table and storing it in one of the auto-refill ways; - * if this PTE load also misses, a miss exception is posted for s/w. - * min-wired = a "min-wired" way can be used to map a single (minimum-sized) - * page arbitrarily under program control; it has a single entry, - * is non-auto-refill (some other way(s) must be auto-refill), - * all its fields (VPN, PPN, ASID, CA) are all writable, and it - * supports the XCHAL_MMU_MIN_PTE_PAGE_SIZE page size (a current - * restriction is that this be the only page size it supports). - * - * TLB way entries are virtually indexed. - * TLB ways that support multiple page sizes: - * - must have all writable VPN and PPN fields; - * - can only use one page size at any given time (eg. setup at startup), - * selected by the respective ITLBCFG or DTLBCFG special register, - * whose bits n*4+3 .. n*4 index the list of page sizes for way n - * (XCHAL_xTLB_SETm_PAGESZ_LOG2_LIST for set m corresponding to way n); - * this list may be sparse for auto-refill ways because auto-refill - * ways have independent lists of supported page sizes sharing a - * common encoding with PTE entries; the encoding is the index into - * this list; unsupported sizes for a given way are zero in the list; - * selecting unsupported sizes results in undefined hardware behaviour; - * - is only possible for ways 0 thru 7 (due to ITLBCFG/DTLBCFG definition). - */ - -#define XCHAL_HAVE_CACHEATTR 0 /* 1 if CACHEATTR register present, 0 if TLBs present instead */ -#define XCHAL_HAVE_TLBS 1 /* 1 if TLBs present, 0 if CACHEATTR present instead */ -#define XCHAL_HAVE_MMU XCHAL_HAVE_TLBS /* (DEPRECATED; use XCHAL_HAVE_TLBS instead; will be removed in future release) */ -#define XCHAL_HAVE_SPANNING_WAY 0 /* 1 if single way maps entire virtual address space in I+D */ -#define XCHAL_HAVE_IDENTITY_MAP 0 /* 1 if virtual addr == physical addr always, 0 otherwise */ -#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config (CaMMU) */ -#define XCHAL_HAVE_XLT_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config, but with translation (CaXltMMU) */ - -#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs (address space IDs) */ -#define XCHAL_MMU_ASID_INVALID 0 /* ASID value indicating invalid address space */ -#define XCHAL_MMU_ASID_KERNEL 1 /* ASID value indicating kernel (ring 0) address space */ -#define XCHAL_MMU_RINGS 4 /* number of rings supported (1..4) */ -#define XCHAL_MMU_RING_BITS 2 /* number of bits needed to hold ring number */ -#define XCHAL_MMU_SR_BITS 0 /* number of size-restriction bits supported */ -#define XCHAL_MMU_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ -#define XCHAL_MMU_MAX_PTE_PAGE_SIZE 12 /* max page size in a PTE structure (log2) */ -#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 12 /* min page size in a PTE structure (log2) */ - - -/*** Instruction TLB: ***/ - -#define XCHAL_ITLB_WAY_BITS 3 /* number of bits holding the ways */ -#define XCHAL_ITLB_WAYS 7 /* number of ways (n-way set-associative TLB) */ -#define XCHAL_ITLB_ARF_WAYS 4 /* number of auto-refill ways */ -#define XCHAL_ITLB_SETS 4 /* number of sets (groups of ways with identical settings) */ - -/* Way set to which each way belongs: */ -#define XCHAL_ITLB_WAY0_SET 0 -#define XCHAL_ITLB_WAY1_SET 0 -#define XCHAL_ITLB_WAY2_SET 0 -#define XCHAL_ITLB_WAY3_SET 0 -#define XCHAL_ITLB_WAY4_SET 1 -#define XCHAL_ITLB_WAY5_SET 2 -#define XCHAL_ITLB_WAY6_SET 3 - -/* Ways sets that are used by hardware auto-refill (ARF): */ -#define XCHAL_ITLB_ARF_SETS 1 /* number of auto-refill sets */ -#define XCHAL_ITLB_ARF_SET0 0 /* index of n'th auto-refill set */ - -/* Way sets that are "min-wired" (see terminology comment above): */ -#define XCHAL_ITLB_MINWIRED_SETS 0 /* number of "min-wired" sets */ - - -/* ITLB way set 0 (group of ways 0 thru 3): */ -#define XCHAL_ITLB_SET0_WAY 0 /* index of first way in this way set */ -#define XCHAL_ITLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* ITLB way set 1 (group of ways 4 thru 4): */ -#define XCHAL_ITLB_SET1_WAY 4 /* index of first way in this way set */ -#define XCHAL_ITLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* ITLB way set 2 (group of ways 5 thru 5): */ -#define XCHAL_ITLB_SET2_WAY 5 /* index of first way in this way set */ -#define XCHAL_ITLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of ITLB way set 2 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_ASID_CONST 0x01 -#define XCHAL_ITLB_SET2_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of ITLB way set 2 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_VPN_CONST 0xD0000000 -#define XCHAL_ITLB_SET2_E1_VPN_CONST 0xD8000000 -/* Constant PPN values for each entry of ITLB way set 2 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_PPN_CONST 0x00000000 -#define XCHAL_ITLB_SET2_E1_PPN_CONST 0x00000000 -/* Constant CA values for each entry of ITLB way set 2 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_CA_CONST 0x07 -#define XCHAL_ITLB_SET2_E1_CA_CONST 0x03 - -/* ITLB way set 3 (group of ways 6 thru 6): */ -#define XCHAL_ITLB_SET3_WAY 6 /* index of first way in this way set */ -#define XCHAL_ITLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of ITLB way set 3 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_ASID_CONST 0x01 -#define XCHAL_ITLB_SET3_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of ITLB way set 3 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_VPN_CONST 0xE0000000 -#define XCHAL_ITLB_SET3_E1_VPN_CONST 0xF0000000 -/* Constant PPN values for each entry of ITLB way set 3 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_PPN_CONST 0xF0000000 -#define XCHAL_ITLB_SET3_E1_PPN_CONST 0xF0000000 -/* Constant CA values for each entry of ITLB way set 3 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_CA_CONST 0x07 -#define XCHAL_ITLB_SET3_E1_CA_CONST 0x03 - -/* Indexing macros: */ -#define _XCHAL_ITLB_SET(n,_what) XCHAL_ITLB_SET ## n ## _what -#define XCHAL_ITLB_SET(n,what) _XCHAL_ITLB_SET(n, _ ## what ) -#define _XCHAL_ITLB_SET_E(n,i,_what) XCHAL_ITLB_SET ## n ## _E ## i ## _what -#define XCHAL_ITLB_SET_E(n,i,what) _XCHAL_ITLB_SET_E(n,i, _ ## what ) -/* - * Example use: XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES) - * to get the value of XCHAL_ITLB_SET_ENTRIES where is the first auto-refill set. - */ - - -/*** Data TLB: ***/ - -#define XCHAL_DTLB_WAY_BITS 4 /* number of bits holding the ways */ -#define XCHAL_DTLB_WAYS 10 /* number of ways (n-way set-associative TLB) */ -#define XCHAL_DTLB_ARF_WAYS 4 /* number of auto-refill ways */ -#define XCHAL_DTLB_SETS 5 /* number of sets (groups of ways with identical settings) */ - -/* Way set to which each way belongs: */ -#define XCHAL_DTLB_WAY0_SET 0 -#define XCHAL_DTLB_WAY1_SET 0 -#define XCHAL_DTLB_WAY2_SET 0 -#define XCHAL_DTLB_WAY3_SET 0 -#define XCHAL_DTLB_WAY4_SET 1 -#define XCHAL_DTLB_WAY5_SET 2 -#define XCHAL_DTLB_WAY6_SET 3 -#define XCHAL_DTLB_WAY7_SET 4 -#define XCHAL_DTLB_WAY8_SET 4 -#define XCHAL_DTLB_WAY9_SET 4 - -/* Ways sets that are used by hardware auto-refill (ARF): */ -#define XCHAL_DTLB_ARF_SETS 1 /* number of auto-refill sets */ -#define XCHAL_DTLB_ARF_SET0 0 /* index of n'th auto-refill set */ - -/* Way sets that are "min-wired" (see terminology comment above): */ -#define XCHAL_DTLB_MINWIRED_SETS 1 /* number of "min-wired" sets */ -#define XCHAL_DTLB_MINWIRED_SET0 4 /* index of n'th "min-wired" set */ - - -/* DTLB way set 0 (group of ways 0 thru 3): */ -#define XCHAL_DTLB_SET0_WAY 0 /* index of first way in this way set */ -#define XCHAL_DTLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* DTLB way set 1 (group of ways 4 thru 4): */ -#define XCHAL_DTLB_SET1_WAY 4 /* index of first way in this way set */ -#define XCHAL_DTLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* DTLB way set 2 (group of ways 5 thru 5): */ -#define XCHAL_DTLB_SET2_WAY 5 /* index of first way in this way set */ -#define XCHAL_DTLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of DTLB way set 2 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_ASID_CONST 0x01 -#define XCHAL_DTLB_SET2_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of DTLB way set 2 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_VPN_CONST 0xD0000000 -#define XCHAL_DTLB_SET2_E1_VPN_CONST 0xD8000000 -/* Constant PPN values for each entry of DTLB way set 2 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_PPN_CONST 0x00000000 -#define XCHAL_DTLB_SET2_E1_PPN_CONST 0x00000000 -/* Constant CA values for each entry of DTLB way set 2 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_CA_CONST 0x07 -#define XCHAL_DTLB_SET2_E1_CA_CONST 0x03 - -/* DTLB way set 3 (group of ways 6 thru 6): */ -#define XCHAL_DTLB_SET3_WAY 6 /* index of first way in this way set */ -#define XCHAL_DTLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of DTLB way set 3 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_ASID_CONST 0x01 -#define XCHAL_DTLB_SET3_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of DTLB way set 3 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_VPN_CONST 0xE0000000 -#define XCHAL_DTLB_SET3_E1_VPN_CONST 0xF0000000 -/* Constant PPN values for each entry of DTLB way set 3 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_PPN_CONST 0xF0000000 -#define XCHAL_DTLB_SET3_E1_PPN_CONST 0xF0000000 -/* Constant CA values for each entry of DTLB way set 3 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_CA_CONST 0x07 -#define XCHAL_DTLB_SET3_E1_CA_CONST 0x03 - -/* DTLB way set 4 (group of ways 7 thru 9): */ -#define XCHAL_DTLB_SET4_WAY 7 /* index of first way in this way set */ -#define XCHAL_DTLB_SET4_WAYS 3 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET4_ENTRIES_LOG2 0 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET4_ENTRIES 1 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET4_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET4_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET4_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET4_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET4_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET4_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET4_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET4_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* Indexing macros: */ -#define _XCHAL_DTLB_SET(n,_what) XCHAL_DTLB_SET ## n ## _what -#define XCHAL_DTLB_SET(n,what) _XCHAL_DTLB_SET(n, _ ## what ) -#define _XCHAL_DTLB_SET_E(n,i,_what) XCHAL_DTLB_SET ## n ## _E ## i ## _what -#define XCHAL_DTLB_SET_E(n,i,what) _XCHAL_DTLB_SET_E(n,i, _ ## what ) -/* - * Example use: XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES) - * to get the value of XCHAL_DTLB_SET_ENTRIES where is the first auto-refill set. - */ - - -/* - * Determine whether we have a full MMU (with Page Table and Protection) - * usable for an MMU-based OS: - */ -#if XCHAL_HAVE_TLBS && !XCHAL_HAVE_SPANNING_WAY && XCHAL_ITLB_ARF_WAYS > 0 && XCHAL_DTLB_ARF_WAYS > 0 && XCHAL_MMU_RINGS >= 2 -# define XCHAL_HAVE_PTP_MMU 1 /* have full MMU (with page table [autorefill] and protection) */ -#else -# define XCHAL_HAVE_PTP_MMU 0 /* don't have full MMU */ -#endif - -/* - * For full MMUs, report kernel RAM segment and kernel I/O segment static page mappings: - */ -#if XCHAL_HAVE_PTP_MMU -#define XCHAL_KSEG_CACHED_VADDR 0xD0000000 /* virt.addr of kernel RAM cached static map */ -#define XCHAL_KSEG_CACHED_PADDR 0x00000000 /* phys.addr of kseg_cached */ -#define XCHAL_KSEG_CACHED_SIZE 0x08000000 /* size in bytes of kseg_cached (assumed power of 2!!!) */ -#define XCHAL_KSEG_BYPASS_VADDR 0xD8000000 /* virt.addr of kernel RAM bypass (uncached) static map */ -#define XCHAL_KSEG_BYPASS_PADDR 0x00000000 /* phys.addr of kseg_bypass */ -#define XCHAL_KSEG_BYPASS_SIZE 0x08000000 /* size in bytes of kseg_bypass (assumed power of 2!!!) */ - -#define XCHAL_KIO_CACHED_VADDR 0xE0000000 /* virt.addr of kernel I/O cached static map */ -#define XCHAL_KIO_CACHED_PADDR 0xF0000000 /* phys.addr of kio_cached */ -#define XCHAL_KIO_CACHED_SIZE 0x10000000 /* size in bytes of kio_cached (assumed power of 2!!!) */ -#define XCHAL_KIO_BYPASS_VADDR 0xF0000000 /* virt.addr of kernel I/O bypass (uncached) static map */ -#define XCHAL_KIO_BYPASS_PADDR 0xF0000000 /* phys.addr of kio_bypass */ -#define XCHAL_KIO_BYPASS_SIZE 0x10000000 /* size in bytes of kio_bypass (assumed power of 2!!!) */ - -#define XCHAL_SEG_MAPPABLE_VADDR 0x00000000 /* start of largest non-static-mapped virtual addr area */ -#define XCHAL_SEG_MAPPABLE_SIZE 0xD0000000 /* size in bytes of " */ -/* define XCHAL_SEG_MAPPABLE2_xxx if more areas present, sorted in order of descending size. */ -#endif - - -/*---------------------------------------------------------------------- - MISC - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* number of write buffer entries */ - -#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier - (CoreID) set in the Xtensa Processor Generator */ - -#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ - -/* These definitions describe the hardware targeted by this software: */ -#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ -#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ -#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ -#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ -#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ -#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ -#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ -#define XTHAL_HW_REL_T1050 1 -#define XTHAL_HW_REL_T1050_1 1 -#define XCHAL_HW_CONFIGID_RELIABLE 1 - - -/* - * Miscellaneous special register fields: - */ - - -/* DBREAKC (special register number 160): */ -#define XCHAL_DBREAKC_VALIDMASK 0xC000003F /* bits of DBREAKC that are defined */ -/* MASK field: */ -#define XCHAL_DBREAKC_MASK_BITS 6 /* number of bits in MASK field */ -#define XCHAL_DBREAKC_MASK_NUM 64 /* max number of possible causes (2^bits) */ -#define XCHAL_DBREAKC_MASK_SHIFT 0 /* position of MASK bits in DBREAKC, starting from lsbit */ -#define XCHAL_DBREAKC_MASK_MASK 0x0000003F /* mask of bits in MASK field of DBREAKC */ -/* LOADBREAK field: */ -#define XCHAL_DBREAKC_LOADBREAK_BITS 1 /* number of bits in LOADBREAK field */ -#define XCHAL_DBREAKC_LOADBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DBREAKC_LOADBREAK_SHIFT 30 /* position of LOADBREAK bits in DBREAKC, starting from lsbit */ -#define XCHAL_DBREAKC_LOADBREAK_MASK 0x40000000 /* mask of bits in LOADBREAK field of DBREAKC */ -/* STOREBREAK field: */ -#define XCHAL_DBREAKC_STOREBREAK_BITS 1 /* number of bits in STOREBREAK field */ -#define XCHAL_DBREAKC_STOREBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DBREAKC_STOREBREAK_SHIFT 31 /* position of STOREBREAK bits in DBREAKC, starting from lsbit */ -#define XCHAL_DBREAKC_STOREBREAK_MASK 0x80000000 /* mask of bits in STOREBREAK field of DBREAKC */ - -/* PS (special register number 230): */ -#define XCHAL_PS_VALIDMASK 0x00070FFF /* bits of PS that are defined */ -/* INTLEVEL field: */ -#define XCHAL_PS_INTLEVEL_BITS 4 /* number of bits in INTLEVEL field */ -#define XCHAL_PS_INTLEVEL_NUM 16 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_INTLEVEL_SHIFT 0 /* position of INTLEVEL bits in PS, starting from lsbit */ -#define XCHAL_PS_INTLEVEL_MASK 0x0000000F /* mask of bits in INTLEVEL field of PS */ -/* EXCM field: */ -#define XCHAL_PS_EXCM_BITS 1 /* number of bits in EXCM field */ -#define XCHAL_PS_EXCM_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_EXCM_SHIFT 4 /* position of EXCM bits in PS, starting from lsbit */ -#define XCHAL_PS_EXCM_MASK 0x00000010 /* mask of bits in EXCM field of PS */ -/* PROGSTACK field: */ -#define XCHAL_PS_PROGSTACK_BITS 1 /* number of bits in PROGSTACK field */ -#define XCHAL_PS_PROGSTACK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_PROGSTACK_SHIFT 5 /* position of PROGSTACK bits in PS, starting from lsbit */ -#define XCHAL_PS_PROGSTACK_MASK 0x00000020 /* mask of bits in PROGSTACK field of PS */ -/* RING field: */ -#define XCHAL_PS_RING_BITS 2 /* number of bits in RING field */ -#define XCHAL_PS_RING_NUM 4 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_RING_SHIFT 6 /* position of RING bits in PS, starting from lsbit */ -#define XCHAL_PS_RING_MASK 0x000000C0 /* mask of bits in RING field of PS */ -/* OWB field: */ -#define XCHAL_PS_OWB_BITS 4 /* number of bits in OWB field */ -#define XCHAL_PS_OWB_NUM 16 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_OWB_SHIFT 8 /* position of OWB bits in PS, starting from lsbit */ -#define XCHAL_PS_OWB_MASK 0x00000F00 /* mask of bits in OWB field of PS */ -/* CALLINC field: */ -#define XCHAL_PS_CALLINC_BITS 2 /* number of bits in CALLINC field */ -#define XCHAL_PS_CALLINC_NUM 4 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_CALLINC_SHIFT 16 /* position of CALLINC bits in PS, starting from lsbit */ -#define XCHAL_PS_CALLINC_MASK 0x00030000 /* mask of bits in CALLINC field of PS */ -/* WOE field: */ -#define XCHAL_PS_WOE_BITS 1 /* number of bits in WOE field */ -#define XCHAL_PS_WOE_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_WOE_SHIFT 18 /* position of WOE bits in PS, starting from lsbit */ -#define XCHAL_PS_WOE_MASK 0x00040000 /* mask of bits in WOE field of PS */ - -/* EXCCAUSE (special register number 232): */ -#define XCHAL_EXCCAUSE_VALIDMASK 0x0000003F /* bits of EXCCAUSE that are defined */ -/* EXCCAUSE field: */ -#define XCHAL_EXCCAUSE_BITS 6 /* number of bits in EXCCAUSE register */ -#define XCHAL_EXCCAUSE_NUM 64 /* max number of possible causes (2^bits) */ -#define XCHAL_EXCCAUSE_SHIFT 0 /* position of EXCCAUSE bits in register, starting from lsbit */ -#define XCHAL_EXCCAUSE_MASK 0x0000003F /* mask of bits in EXCCAUSE register */ - -/* DEBUGCAUSE (special register number 233): */ -#define XCHAL_DEBUGCAUSE_VALIDMASK 0x0000003F /* bits of DEBUGCAUSE that are defined */ -/* ICOUNT field: */ -#define XCHAL_DEBUGCAUSE_ICOUNT_BITS 1 /* number of bits in ICOUNT field */ -#define XCHAL_DEBUGCAUSE_ICOUNT_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_ICOUNT_SHIFT 0 /* position of ICOUNT bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_ICOUNT_MASK 0x00000001 /* mask of bits in ICOUNT field of DEBUGCAUSE */ -/* IBREAK field: */ -#define XCHAL_DEBUGCAUSE_IBREAK_BITS 1 /* number of bits in IBREAK field */ -#define XCHAL_DEBUGCAUSE_IBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_IBREAK_SHIFT 1 /* position of IBREAK bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_IBREAK_MASK 0x00000002 /* mask of bits in IBREAK field of DEBUGCAUSE */ -/* DBREAK field: */ -#define XCHAL_DEBUGCAUSE_DBREAK_BITS 1 /* number of bits in DBREAK field */ -#define XCHAL_DEBUGCAUSE_DBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_DBREAK_SHIFT 2 /* position of DBREAK bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_DBREAK_MASK 0x00000004 /* mask of bits in DBREAK field of DEBUGCAUSE */ -/* BREAK field: */ -#define XCHAL_DEBUGCAUSE_BREAK_BITS 1 /* number of bits in BREAK field */ -#define XCHAL_DEBUGCAUSE_BREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_BREAK_SHIFT 3 /* position of BREAK bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_BREAK_MASK 0x00000008 /* mask of bits in BREAK field of DEBUGCAUSE */ -/* BREAKN field: */ -#define XCHAL_DEBUGCAUSE_BREAKN_BITS 1 /* number of bits in BREAKN field */ -#define XCHAL_DEBUGCAUSE_BREAKN_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_BREAKN_SHIFT 4 /* position of BREAKN bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_BREAKN_MASK 0x00000010 /* mask of bits in BREAKN field of DEBUGCAUSE */ -/* DEBUGINT field: */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_BITS 1 /* number of bits in DEBUGINT field */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_SHIFT 5 /* position of DEBUGINT bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_MASK 0x00000020 /* mask of bits in DEBUGINT field of DEBUGCAUSE */ - - - -/*---------------------------------------------------------------------- - ISA - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_DENSITY 1 /* 1 if density option configured, 0 otherwise */ -#define XCHAL_HAVE_LOOPS 1 /* 1 if zero-overhead loops option configured, 0 otherwise */ -/* Misc instructions: */ -#define XCHAL_HAVE_NSA 0 /* 1 if NSA/NSAU instructions option configured, 0 otherwise */ -#define XCHAL_HAVE_MINMAX 0 /* 1 if MIN/MAX instructions option configured, 0 otherwise */ -#define XCHAL_HAVE_SEXT 0 /* 1 if sign-extend instruction option configured, 0 otherwise */ -#define XCHAL_HAVE_CLAMPS 0 /* 1 if CLAMPS instruction option configured, 0 otherwise */ -#define XCHAL_HAVE_MAC16 0 /* 1 if MAC16 option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL16 0 /* 1 if 16-bit integer multiply option configured, 0 otherwise */ -/*#define XCHAL_HAVE_POPC 0*/ /* 1 if CRC instruction option configured, 0 otherwise */ -/*#define XCHAL_HAVE_CRC 0*/ /* 1 if POPC instruction option configured, 0 otherwise */ - -#define XCHAL_HAVE_SPECULATION 0 /* 1 if speculation option configured, 0 otherwise */ -/*#define XCHAL_HAVE_MP_SYNC 0*/ /* 1 if multiprocessor sync. option configured, 0 otherwise */ -#define XCHAL_HAVE_PRID 0 /* 1 if processor ID register configured, 0 otherwise */ - -#define XCHAL_NUM_MISC_REGS 2 /* number of miscellaneous registers (0..4) */ - -/* These relate a bit more to TIE: */ -#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ -#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ - - -/*---------------------------------------------------------------------- - DERIVED - ----------------------------------------------------------------------*/ - -#if XCHAL_HAVE_BE -#define XCHAL_INST_ILLN 0xD60F /* 2-byte illegal instruction, msb-first */ -#define XCHAL_INST_ILLN_BYTE0 0xD6 /* 2-byte illegal instruction, 1st byte */ -#define XCHAL_INST_ILLN_BYTE1 0x0F /* 2-byte illegal instruction, 2nd byte */ -#else -#define XCHAL_INST_ILLN 0xF06D /* 2-byte illegal instruction, lsb-first */ -#define XCHAL_INST_ILLN_BYTE0 0x6D /* 2-byte illegal instruction, 1st byte */ -#define XCHAL_INST_ILLN_BYTE1 0xF0 /* 2-byte illegal instruction, 2nd byte */ -#endif -/* Belongs in xtensa/hal.h: */ -#define XTHAL_INST_ILL 0x000000 /* 3-byte illegal instruction */ - - -/* - * Because information as to exactly which hardware release is targeted - * by a given software build is not always available, compile-time HAL - * Hardware-Release "_AT" macros are fuzzy (return 0, 1, or XCHAL_MAYBE): - */ -#ifndef XCHAL_HW_RELEASE_MAJOR -# define XCHAL_HW_CONFIGID_RELIABLE 0 -#endif -#if XCHAL_HW_CONFIGID_RELIABLE -# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) (XTHAL_REL_LE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) -# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) (XTHAL_REL_GE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) -# define XCHAL_HW_RELEASE_AT(major,minor) (XTHAL_REL_EQ( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) -# define XCHAL_HW_RELEASE_MAJOR_AT(major) ((XCHAL_HW_RELEASE_MAJOR == (major)) ? 1 : 0) -#else -# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) ( ((major) < 1040 && XCHAL_HAVE_XEA2) ? 0 \ - : ((major) > 1050 && XCHAL_HAVE_XEA1) ? 1 \ - : XTHAL_MAYBE ) -# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) ( ((major) >= 2000 && XCHAL_HAVE_XEA1) ? 0 \ - : (XTHAL_REL_LE(major,minor, 1040,0) && XCHAL_HAVE_XEA2) ? 1 \ - : XTHAL_MAYBE ) -# define XCHAL_HW_RELEASE_AT(major,minor) ( (((major) < 1040 && XCHAL_HAVE_XEA2) || \ - ((major) >= 2000 && XCHAL_HAVE_XEA1)) ? 0 : XTHAL_MAYBE) -# define XCHAL_HW_RELEASE_MAJOR_AT(major) XCHAL_HW_RELEASE_AT(major,0) -#endif - -/* - * Specific errata: - */ - -/* - * Erratum T1020.H13, T1030.H7, T1040.H10, T1050.H4 (fixed in T1040.3 and T1050.1; - * relevant only in XEA1, kernel-vector mode, level-one interrupts and overflows enabled): - */ -#define XCHAL_MAYHAVE_ERRATUM_XEA1KWIN (XCHAL_HAVE_XEA1 && \ - (XCHAL_HW_RELEASE_AT_OR_BELOW(1040,2) != 0 \ - || XCHAL_HW_RELEASE_AT(1050,0))) - - - -#endif /*XTENSA_CONFIG_CORE_H*/ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/defs.h b/include/asm-xtensa/xtensa/config-linux_be/defs.h deleted file mode 100644 index f7c58b27337..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/defs.h +++ /dev/null @@ -1,270 +0,0 @@ -/* Definitions for Xtensa instructions, types, and protos. */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - -/* Do not modify. This is automatically generated.*/ - -#ifndef _XTENSA_BASE_HEADER -#define _XTENSA_BASE_HEADER - -#ifdef __XTENSA__ -#if defined(__GNUC__) && !defined(__XCC__) - -#define L8UI_ASM(arr, ars, imm) { \ - __asm__ volatile("l8ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L8UI(ars, imm) \ -({ \ - unsigned char _arr; \ - const unsigned char *_ars = ars; \ - L8UI_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define L16UI_ASM(arr, ars, imm) { \ - __asm__ volatile("l16ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L16UI(ars, imm) \ -({ \ - unsigned short _arr; \ - const unsigned short *_ars = ars; \ - L16UI_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define L16SI_ASM(arr, ars, imm) {\ - __asm__ volatile("l16si %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L16SI(ars, imm) \ -({ \ - signed short _arr; \ - const signed short *_ars = ars; \ - L16SI_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define L32I_ASM(arr, ars, imm) { \ - __asm__ volatile("l32i %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L32I(ars, imm) \ -({ \ - unsigned _arr; \ - const unsigned *_ars = ars; \ - L32I_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define S8I_ASM(arr, ars, imm) {\ - __asm__ volatile("s8i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ -} - -#define XT_S8I(arr, ars, imm) \ -({ \ - signed char _arr = arr; \ - const signed char *_ars = ars; \ - S8I_ASM(_arr, _ars, imm); \ -}) - -#define S16I_ASM(arr, ars, imm) {\ - __asm__ volatile("s16i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ -} - -#define XT_S16I(arr, ars, imm) \ -({ \ - signed short _arr = arr; \ - const signed short *_ars = ars; \ - S16I_ASM(_arr, _ars, imm); \ -}) - -#define S32I_ASM(arr, ars, imm) { \ - __asm__ volatile("s32i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ -} - -#define XT_S32I(arr, ars, imm) \ -({ \ - signed int _arr = arr; \ - const signed int *_ars = ars; \ - S32I_ASM(_arr, _ars, imm); \ -}) - -#define ADDI_ASM(art, ars, imm) {\ - __asm__ ("addi %0, %1, %2" : "=a" (art) : "a" (ars), "i" (imm)); \ -} - -#define XT_ADDI(ars, imm) \ -({ \ - unsigned _art; \ - unsigned _ars = ars; \ - ADDI_ASM(_art, _ars, imm); \ - _art; \ -}) - -#define ABS_ASM(arr, art) {\ - __asm__ ("abs %0, %1" : "=a" (arr) : "a" (art)); \ -} - -#define XT_ABS(art) \ -({ \ - unsigned _arr; \ - signed _art = art; \ - ABS_ASM(_arr, _art); \ - _arr; \ -}) - -/* Note: In the following macros that reference SAR, the magic "state" - register is used to capture the dependency on SAR. This is because - SAR is a 5-bit register and thus there are no C types that can be - used to represent it. It doesn't appear that the SAR register is - even relevant to GCC, but it is marked as "clobbered" just in - case. */ - -#define SRC_ASM(arr, ars, art) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("src %0, %1, %2" \ - : "=a" (arr) : "a" (ars), "a" (art), "t" (_xt_sar)); \ -} - -#define XT_SRC(ars, art) \ -({ \ - unsigned _arr; \ - unsigned _ars = ars; \ - unsigned _art = art; \ - SRC_ASM(_arr, _ars, _art); \ - _arr; \ -}) - -#define SSR_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssr %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSR(ars) \ -({ \ - unsigned _ars = ars; \ - SSR_ASM(_ars); \ -}) - -#define SSL_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssl %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSL(ars) \ -({ \ - unsigned _ars = ars; \ - SSL_ASM(_ars); \ -}) - -#define SSA8B_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssa8b %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSA8B(ars) \ -({ \ - unsigned _ars = ars; \ - SSA8B_ASM(_ars); \ -}) - -#define SSA8L_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssa8l %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSA8L(ars) \ -({ \ - unsigned _ars = ars; \ - SSA8L_ASM(_ars); \ -}) - -#define SSAI_ASM(imm) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssai %1" : "=t" (_xt_sar) : "i" (imm) : "sar"); \ -} - -#define XT_SSAI(imm) \ -({ \ - SSAI_ASM(imm); \ -}) - - - - - - - - -#endif /* __GNUC__ && !__XCC__ */ - -#ifdef __XCC__ - -/* Core load/store instructions */ -extern unsigned char _TIE_L8UI(const unsigned char * ars, immediate imm); -extern unsigned short _TIE_L16UI(const unsigned short * ars, immediate imm); -extern signed short _TIE_L16SI(const signed short * ars, immediate imm); -extern unsigned _TIE_L32I(const unsigned * ars, immediate imm); -extern void _TIE_S8I(unsigned char arr, unsigned char * ars, immediate imm); -extern void _TIE_S16I(unsigned short arr, unsigned short * ars, immediate imm); -extern void _TIE_S32I(unsigned arr, unsigned * ars, immediate imm); - -#define XT_L8UI _TIE_L8UI -#define XT_L16UI _TIE_L16UI -#define XT_L16SI _TIE_L16SI -#define XT_L32I _TIE_L32I -#define XT_S8I _TIE_S8I -#define XT_S16I _TIE_S16I -#define XT_S32I _TIE_S32I - -/* Add-immediate instruction */ -extern unsigned _TIE_ADDI(unsigned ars, immediate imm); -#define XT_ADDI _TIE_ADDI - -/* Absolute value instruction */ -extern unsigned _TIE_ABS(int art); -#define XT_ABS _TIE_ABS - -/* funnel shift instructions */ -extern unsigned _TIE_SRC(unsigned ars, unsigned art); -#define XT_SRC _TIE_SRC -extern void _TIE_SSR(unsigned ars); -#define XT_SSR _TIE_SSR -extern void _TIE_SSL(unsigned ars); -#define XT_SSL _TIE_SSL -extern void _TIE_SSA8B(unsigned ars); -#define XT_SSA8B _TIE_SSA8B -extern void _TIE_SSA8L(unsigned ars); -#define XT_SSA8L _TIE_SSA8L -extern void _TIE_SSAI(immediate imm); -#define XT_SSAI _TIE_SSAI - - -#endif /* __XCC__ */ - -#endif /* __XTENSA__ */ -#endif /* !_XTENSA_BASE_HEADER */ diff --git a/include/asm-xtensa/xtensa/config-linux_be/specreg.h b/include/asm-xtensa/xtensa/config-linux_be/specreg.h deleted file mode 100644 index fa4106aa9a0..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/specreg.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Xtensa Special Register symbolic names - */ - -/* $Id: specreg.h,v 1.2 2003/03/07 19:15:18 joetaylor Exp $ */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - -#ifndef XTENSA_SPECREG_H -#define XTENSA_SPECREG_H - -/* Include these special register bitfield definitions, for historical reasons: */ -#include - - -/* Special registers: */ -#define LBEG 0 -#define LEND 1 -#define LCOUNT 2 -#define SAR 3 -#define WINDOWBASE 72 -#define WINDOWSTART 73 -#define PTEVADDR 83 -#define RASID 90 -#define ITLBCFG 91 -#define DTLBCFG 92 -#define IBREAKENABLE 96 -#define DDR 104 -#define IBREAKA_0 128 -#define IBREAKA_1 129 -#define DBREAKA_0 144 -#define DBREAKA_1 145 -#define DBREAKC_0 160 -#define DBREAKC_1 161 -#define EPC_1 177 -#define EPC_2 178 -#define EPC_3 179 -#define EPC_4 180 -#define DEPC 192 -#define EPS_2 194 -#define EPS_3 195 -#define EPS_4 196 -#define EXCSAVE_1 209 -#define EXCSAVE_2 210 -#define EXCSAVE_3 211 -#define EXCSAVE_4 212 -#define INTERRUPT 226 -#define INTENABLE 228 -#define PS 230 -#define EXCCAUSE 232 -#define DEBUGCAUSE 233 -#define CCOUNT 234 -#define ICOUNT 236 -#define ICOUNTLEVEL 237 -#define EXCVADDR 238 -#define CCOMPARE_0 240 -#define CCOMPARE_1 241 -#define CCOMPARE_2 242 -#define MISC_REG_0 244 -#define MISC_REG_1 245 - -/* Special cases (bases of special register series): */ -#define IBREAKA 128 -#define DBREAKA 144 -#define DBREAKC 160 -#define EPC 176 -#define EPS 192 -#define EXCSAVE 208 -#define CCOMPARE 240 - -/* Special names for read-only and write-only interrupt registers: */ -#define INTREAD 226 -#define INTSET 226 -#define INTCLEAR 227 - -#endif /* XTENSA_SPECREG_H */ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/system.h b/include/asm-xtensa/xtensa/config-linux_be/system.h deleted file mode 100644 index cf9d4d308e3..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/system.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration - * - * NOTE: The location and contents of this file are highly subject to change. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * The HAL itself has historically included this file in some instances, - * but this is not appropriate either, because the HAL is meant to be - * core-specific but system independent. - */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - - -#ifndef XTENSA_CONFIG_SYSTEM_H -#define XTENSA_CONFIG_SYSTEM_H - -/*#include */ - - - -/*---------------------------------------------------------------------- - DEVICE ADDRESSES - ----------------------------------------------------------------------*/ - -/* - * Strange place to find these, but the configuration GUI - * allows moving these around to account for various core - * configurations. Specific boards (and their BSP software) - * will have specific meanings for these components. - */ - -/* I/O Block areas: */ -#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000 -#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000 -#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 - -#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000 -#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000 -#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 - -/* System ROM: */ -#define XSHAL_ROM_VADDR 0xEE000000 -#define XSHAL_ROM_PADDR 0xFE000000 -#define XSHAL_ROM_SIZE 0x00400000 -/* Largest available area (free of vectors): */ -#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C -#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4 - -/* System RAM: */ -#define XSHAL_RAM_VADDR 0xD0000000 -#define XSHAL_RAM_PADDR 0x00000000 -#define XSHAL_RAM_VSIZE 0x08000000 -#define XSHAL_RAM_PSIZE 0x10000000 -#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE -/* Largest available area (free of vectors): */ -#define XSHAL_RAM_AVAIL_VADDR 0xD0000370 -#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90 - -/* - * Shadow system RAM (same device as system RAM, at different address). - * (Emulation boards need this for the SONIC Ethernet driver - * when data caches are configured for writeback mode.) - * NOTE: on full MMU configs, this points to the BYPASS virtual address - * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual - * addresses are viewed through the BYPASS static map rather than - * the CACHED static map. - */ -#define XSHAL_RAM_BYPASS_VADDR 0xD8000000 -#define XSHAL_RAM_BYPASS_PADDR 0x00000000 -#define XSHAL_RAM_BYPASS_PSIZE 0x08000000 - -/* Alternate system RAM (different device than system RAM): */ -#define XSHAL_ALTRAM_VADDR 0xCEE00000 -#define XSHAL_ALTRAM_PADDR 0xC0000000 -#define XSHAL_ALTRAM_SIZE 0x00200000 - - -/*---------------------------------------------------------------------- - * DEVICE-ADDRESS DEPENDENT... - * - * Values written to CACHEATTR special register (or its equivalent) - * to enable and disable caches in various modes. - *----------------------------------------------------------------------*/ - -/*---------------------------------------------------------------------- - BACKWARD COMPATIBILITY ... - ----------------------------------------------------------------------*/ - -/* - * NOTE: the following two macros are DEPRECATED. Use the latter - * board-specific macros instead, which are specially tuned for the - * particular target environments' memory maps. - */ -#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ -#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ - -/*---------------------------------------------------------------------- - ISS (Instruction Set Simulator) SPECIFIC ... - ----------------------------------------------------------------------*/ - -#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */ -#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */ -#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */ -#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ -#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -/* For Coware only: */ -#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */ -#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */ -#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */ -#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ -#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -/* For BFM and other purposes: */ -#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */ -#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */ - -#define XSHAL_ISS_PIPE_REGIONS 0 -#define XSHAL_ISS_SDRAM_REGIONS 0 - - -/*---------------------------------------------------------------------- - XT2000 BOARD SPECIFIC ... - ----------------------------------------------------------------------*/ - -#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */ -#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */ -#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */ -#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */ -#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */ -#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */ - - -/*---------------------------------------------------------------------- - VECTOR SIZES - ----------------------------------------------------------------------*/ - -/* - * Sizes allocated to vectors by the system (memory map) configuration. - * These sizes are constrained by core configuration (eg. one vector's - * code cannot overflow into another vector) but are dependent on the - * system or board (or LSP) memory map configuration. - * - * Whether or not each vector happens to be in a system ROM is also - * a system configuration matter, sometimes useful, included here also: - */ -#define XSHAL_RESET_VECTOR_SIZE 0x000004E0 -#define XSHAL_RESET_VECTOR_ISROM 1 -#define XSHAL_USER_VECTOR_SIZE 0x0000001C -#define XSHAL_USER_VECTOR_ISROM 0 -#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C -#define XSHAL_KERNEL_VECTOR_ISROM 0 -#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0 -#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 -#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180 -#define XSHAL_WINDOW_VECTORS_ISROM 0 -#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL2_VECTOR_ISROM 0 -#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL3_VECTOR_ISROM 0 -#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL4_VECTOR_ISROM 1 -#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE -#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM - - -#endif /*XTENSA_CONFIG_SYSTEM_H*/ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/tie.h b/include/asm-xtensa/xtensa/config-linux_be/tie.h deleted file mode 100644 index 07c6d1ca458..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/tie.h +++ /dev/null @@ -1,275 +0,0 @@ -/* - * xtensa/config/tie.h -- HAL definitions that are dependent on CORE and TIE configuration - * - * This header file is sometimes referred to as the "compile-time HAL" or CHAL. - * It was generated for a specific Xtensa processor configuration, - * and furthermore for a specific set of TIE source files that extend - * basic core functionality. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * It is perfectly normal, however, for the HAL source itself to include this file. - */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - - -#ifndef XTENSA_CONFIG_TIE_H -#define XTENSA_CONFIG_TIE_H - -#include - - -/*---------------------------------------------------------------------- - GENERAL - ----------------------------------------------------------------------*/ - -/* - * Separators for macros that expand into arrays. - * These can be predefined by files that #include this one, - * when different separators are required. - */ -/* Element separator for macros that expand into 1-dimensional arrays: */ -#ifndef XCHAL_SEP -#define XCHAL_SEP , -#endif -/* Array separator for macros that expand into 2-dimensional arrays: */ -#ifndef XCHAL_SEP2 -#define XCHAL_SEP2 },{ -#endif - - - - - - -/*---------------------------------------------------------------------- - COPROCESSORS and EXTRA STATE - ----------------------------------------------------------------------*/ - -#define XCHAL_CP_NUM 0 /* number of coprocessors */ -#define XCHAL_CP_MAX 0 /* max coprocessor id plus one (0 if none) */ -#define XCHAL_CP_MASK 0x00 /* bitmask of coprocessors by id */ - -/* Space for coprocessors' state save areas: */ -#define XCHAL_CP0_SA_SIZE 0 -#define XCHAL_CP1_SA_SIZE 0 -#define XCHAL_CP2_SA_SIZE 0 -#define XCHAL_CP3_SA_SIZE 0 -#define XCHAL_CP4_SA_SIZE 0 -#define XCHAL_CP5_SA_SIZE 0 -#define XCHAL_CP6_SA_SIZE 0 -#define XCHAL_CP7_SA_SIZE 0 -/* Minimum required alignments of CP state save areas: */ -#define XCHAL_CP0_SA_ALIGN 1 -#define XCHAL_CP1_SA_ALIGN 1 -#define XCHAL_CP2_SA_ALIGN 1 -#define XCHAL_CP3_SA_ALIGN 1 -#define XCHAL_CP4_SA_ALIGN 1 -#define XCHAL_CP5_SA_ALIGN 1 -#define XCHAL_CP6_SA_ALIGN 1 -#define XCHAL_CP7_SA_ALIGN 1 - -/* Indexing macros: */ -#define _XCHAL_CP_SA_SIZE(n) XCHAL_CP ## n ## _SA_SIZE -#define XCHAL_CP_SA_SIZE(n) _XCHAL_CP_SA_SIZE(n) /* n = 0 .. 7 */ -#define _XCHAL_CP_SA_ALIGN(n) XCHAL_CP ## n ## _SA_ALIGN -#define XCHAL_CP_SA_ALIGN(n) _XCHAL_CP_SA_ALIGN(n) /* n = 0 .. 7 */ - - -/* Space for "extra" state (user special registers and non-cp TIE) save area: */ -#define XCHAL_EXTRA_SA_SIZE 0 -#define XCHAL_EXTRA_SA_ALIGN 1 - -/* Total save area size (extra + all coprocessors) */ -/* (not useful until xthal_{save,restore}_all_extra() is implemented, */ -/* but included for Tor2 beta; doesn't account for alignment!): */ -#define XCHAL_CPEXTRA_SA_SIZE_TOR2 0 /* Tor2Beta temporary definition -- do not use */ - -/* Combined required alignment for all CP and EXTRA state save areas */ -/* (does not include required alignment for any base config registers): */ -#define XCHAL_CPEXTRA_SA_ALIGN 1 - -/* ... */ - - -#ifdef __ASSEMBLER__ -/* - * Assembly-language specific definitions (assembly macros, etc.). - */ -#include - -/******************** - * Macros to save and restore the non-coprocessor TIE portion of EXTRA state. - */ - -/* (none) */ - - -/******************** - * Macros to create functions that save and restore all EXTRA (non-coprocessor) state - * (does not include zero-overhead loop registers and non-optional registers). - */ - - /* - * Macro that expands to the body of a function that - * stores the extra (non-coprocessor) optional/custom state. - * Entry: a2 = ptr to save area in which to save extra state - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_extra_store_funcbody - .endm - - - /* - * Macro that expands to the body of a function that - * loads the extra (non-coprocessor) optional/custom state. - * Entry: a2 = ptr to save area from which to restore extra state - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_extra_load_funcbody - .endm - - -/******************** - * Macros to save and restore the state of each TIE coprocessor. - */ - - - -/******************** - * Macros to create functions that save and restore the state of *any* TIE coprocessor. - */ - - /* - * Macro that expands to the body of a function - * that stores the selected coprocessor's state (registers etc). - * Entry: a2 = ptr to save area in which to save cp state - * a3 = coprocessor number - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_cpi_store_funcbody - .endm - - - /* - * Macro that expands to the body of a function - * that loads the selected coprocessor's state (registers etc). - * Entry: a2 = ptr to save area from which to restore cp state - * a3 = coprocessor number - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_cpi_load_funcbody - .endm - -#endif /*_ASMLANGUAGE*/ - - -/* - * Contents of save areas in terms of libdb register numbers. - * NOTE: CONTENTS_LIBDB_{UREG,REGF} macros are not defined in this file; - * it is up to the user of this header file to define these macros - * usefully before each expansion of the CONTENTS_LIBDB macros. - * (Fields rsv[123] are reserved for future additions; they are currently - * set to zero but may be set to some useful values in the future.) - * - * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum, bitmask, rsv2, rsv3) - * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum, bitmask, rsv2, rsv3) - * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, numentries, contentsize, regname_base, regfile_name, rsv2, rsv3) - */ - -#define XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_EXTRA_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP0_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP0_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP1_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP1_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP2_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP2_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP3_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP3_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP4_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP4_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP5_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP5_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP6_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP6_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP7_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP7_SA_CONTENTS_LIBDB /* empty */ - - - - - - -/*---------------------------------------------------------------------- - MISC - ----------------------------------------------------------------------*/ - -#if 0 /* is there something equivalent for user TIE? */ -#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier - (CoreID) set in the Xtensa Processor Generator */ - -#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ - -/* These definitions describe the hardware targeted by this software: */ -#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ -#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ -#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ -#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ -#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ -#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ -#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ -#define XTHAL_HW_REL_T1050 1 -#define XTHAL_HW_REL_T1050_1 1 -#define XCHAL_HW_CONFIGID_RELIABLE 1 -#endif /*0*/ - - - -/*---------------------------------------------------------------------- - ISA - ----------------------------------------------------------------------*/ - -#if 0 /* these probably don't belong here, but are related to or implemented using TIE */ -#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ -/* Misc instructions: */ -#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ - -#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ -#endif /*0*/ - - -#endif /*XTENSA_CONFIG_TIE_H*/ - diff --git a/include/asm-xtensa/xtensa/coreasm.h b/include/asm-xtensa/xtensa/coreasm.h deleted file mode 100644 index a8cfb54c20a..00000000000 --- a/include/asm-xtensa/xtensa/coreasm.h +++ /dev/null @@ -1,526 +0,0 @@ -#ifndef XTENSA_COREASM_H -#define XTENSA_COREASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/coreasm.h -- assembler-specific - * definitions that depend on CORE configuration. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * It is perfectly normal, however, for the HAL itself to include this - * file. - * - * This file must NOT include xtensa/config/system.h. Any assembler - * header file that depends on system information should likely go in - * a new systemasm.h (or sysasm.h) header file. - * - * NOTE: macro beqi32 is NOT configuration-dependent, and is placed - * here til we will have configuration-independent header file. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include -#include - -/* - * Assembly-language specific definitions (assembly macros, etc.). - */ - -/*---------------------------------------------------------------------- - * find_ms_setbit - * - * This macro finds the most significant bit that is set in - * and return its index + in , or - 1 if is zero. - * The index counts starting at zero for the lsbit, so the return - * value ranges from -1 (no bit set) to +31 (msbit set). - * - * Parameters: - * destination address register (any register) - * source address register - * temporary address register (must be different than ) - * constant value added to result (usually 0 or 1) - * On entry: - * = undefined if different than - * = value whose most significant set bit is to be found - * = undefined - * no other registers are used by this macro. - * On exit: - * = + index of msbit set in original , - * = - 1 if original was zero. - * clobbered (if not ) - * clobbered (if not ) - * Example: - * find_ms_setbit a0, a4, a0, 0 -- return in a0 index of msbit set in a4 - */ - - .macro find_ms_setbit ad, as, at, base -#if XCHAL_HAVE_NSA - movi \at, 31+\base - nsau \as, \as // get index of \as, numbered from msbit (32 if absent) - sub \ad, \at, \as // get numbering from lsbit (0..31, -1 if absent) -#else /* XCHAL_HAVE_NSA */ - movi \at, \base // start with result of 0 (point to lsbit of 32) - - beqz \as, 2f // special case for zero argument: return -1 - bltui \as, 0x10000, 1f // is it one of the 16 lsbits? (if so, check lower 16 bits) - addi \at, \at, 16 // no, increment result to upper 16 bits (of 32) - //srli \as, \as, 16 // check upper half (shift right 16 bits) - extui \as, \as, 16, 16 // check upper half (shift right 16 bits) -1: bltui \as, 0x100, 1f // is it one of the 8 lsbits? (if so, check lower 8 bits) - addi \at, \at, 8 // no, increment result to upper 8 bits (of 16) - srli \as, \as, 8 // shift right to check upper 8 bits -1: bltui \as, 0x10, 1f // is it one of the 4 lsbits? (if so, check lower 4 bits) - addi \at, \at, 4 // no, increment result to upper 4 bits (of 8) - srli \as, \as, 4 // shift right 4 bits to check upper half -1: bltui \as, 0x4, 1f // is it one of the 2 lsbits? (if so, check lower 2 bits) - addi \at, \at, 2 // no, increment result to upper 2 bits (of 4) - srli \as, \as, 2 // shift right 2 bits to check upper half -1: bltui \as, 0x2, 1f // is it the lsbit? - addi \at, \at, 2 // no, increment result to upper bit (of 2) -2: addi \at, \at, -1 // (from just above: add 1; from beqz: return -1) - //srli \as, \as, 1 -1: // done! \at contains index of msbit set (or -1 if none set) - .if 0x\ad - 0x\at // destination different than \at ? (works because regs are a0-a15) - mov \ad, \at // then move result to \ad - .endif -#endif /* XCHAL_HAVE_NSA */ - .endm // find_ms_setbit - -/*---------------------------------------------------------------------- - * find_ls_setbit - * - * This macro finds the least significant bit that is set in , - * and return its index in . - * Usage is the same as for the find_ms_setbit macro. - * Example: - * find_ls_setbit a0, a4, a0, 0 -- return in a0 index of lsbit set in a4 - */ - - .macro find_ls_setbit ad, as, at, base - neg \at, \as // keep only the least-significant bit that is set... - and \as, \at, \as // ... in \as - find_ms_setbit \ad, \as, \at, \base - .endm // find_ls_setbit - -/*---------------------------------------------------------------------- - * find_ls_one - * - * Same as find_ls_setbit with base zero. - * Source (as) and destination (ad) registers must be different. - * Provided for backward compatibility. - */ - - .macro find_ls_one ad, as - find_ls_setbit \ad, \as, \ad, 0 - .endm // find_ls_one - -/*---------------------------------------------------------------------- - * floop, floopnez, floopgtz, floopend - * - * These macros are used for fast inner loops that - * work whether or not the Loops options is configured. - * If the Loops option is configured, they simply use - * the zero-overhead LOOP instructions; otherwise - * they use explicit decrement and branch instructions. - * - * They are used in pairs, with floop, floopnez or floopgtz - * at the beginning of the loop, and floopend at the end. - * - * Each pair of loop macro calls must be given the loop count - * address register and a unique label for that loop. - * - * Example: - * - * movi a3, 16 // loop 16 times - * floop a3, myloop1 - * : - * bnez a7, end1 // exit loop if a7 != 0 - * : - * floopend a3, myloop1 - * end1: - * - * Like the LOOP instructions, these macros cannot be - * nested, must include at least one instruction, - * cannot call functions inside the loop, etc. - * The loop can be exited by jumping to the instruction - * following floopend (or elsewhere outside the loop), - * or continued by jumping to a NOP instruction placed - * immediately before floopend. - * - * Unlike LOOP instructions, the register passed to floop* - * cannot be used inside the loop, because it is used as - * the loop counter if the Loops option is not configured. - * And its value is undefined after exiting the loop. - * And because the loop counter register is active inside - * the loop, you can't easily use this construct to loop - * across a register file using ROTW as you might with LOOP - * instructions, unless you copy the loop register along. - */ - - /* Named label version of the macros: */ - - .macro floop ar, endlabel - floop_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopnez ar, endlabel - floopnez_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopgtz ar, endlabel - floopgtz_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopend ar, endlabel - floopend_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - /* Numbered local label version of the macros: */ -#if 0 /*UNTESTED*/ - .macro floop89 ar - floop_ \ar, 8, 9f - .endm - - .macro floopnez89 ar - floopnez_ \ar, 8, 9f - .endm - - .macro floopgtz89 ar - floopgtz_ \ar, 8, 9f - .endm - - .macro floopend89 ar - floopend_ \ar, 8b, 9 - .endm -#endif /*0*/ - - /* Underlying version of the macros: */ - - .macro floop_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floop cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loop \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floop_ - - .macro floopnez_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floopnez cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loopnez \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ - beqz \ar, \endlabelref -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floopnez_ - - .macro floopgtz_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floopgtz cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loopgtz \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ - bltz \ar, \endlabelref - beqz \ar, \endlabelref -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floopgtz_ - - - .macro floopend_ ar, startlabelref, endlabel - .ifndef _infloop_ - .err // Error: floopend without matching floopXXX - .endif - .ifeq _infloop_ - .err // Error: floopend without matching floopXXX - .endif - .set _infloop_, 0 -#if ! XCHAL_HAVE_LOOPS - bnez \ar, \startlabelref -#endif /* XCHAL_HAVE_LOOPS */ -\endlabel: - .endm // floopend_ - -/*---------------------------------------------------------------------- - * crsil -- conditional RSIL (read/set interrupt level) - * - * Executes the RSIL instruction if it exists, else just reads PS. - * The RSIL instruction does not exist in the new exception architecture - * if the interrupt option is not selected. - */ - - .macro crsil ar, newlevel -#if XCHAL_HAVE_OLD_EXC_ARCH || XCHAL_HAVE_INTERRUPTS - rsil \ar, \newlevel -#else - rsr \ar, PS -#endif - .endm // crsil - -/*---------------------------------------------------------------------- - * window_spill{4,8,12} - * - * These macros spill callers' register windows to the stack. - * They work for both privileged and non-privileged tasks. - * Must be called from a windowed ABI context, eg. within - * a windowed ABI function (ie. valid stack frame, window - * exceptions enabled, not in exception mode, etc). - * - * This macro requires a single invocation of the window_spill_common - * macro in the same assembly unit and section. - * - * Note that using window_spill{4,8,12} macros is more efficient - * than calling a function implemented using window_spill_function, - * because the latter needs extra code to figure out the size of - * the call to the spilling function. - * - * Example usage: - * - * .text - * .align 4 - * .global some_function - * .type some_function,@function - * some_function: - * entry a1, 16 - * : - * : - * - * window_spill4 // spill windows of some_function's callers; preserves a0..a3 only; - * // to use window_spill{8,12} in this example function we'd have - * // to increase space allocated by the entry instruction, because - * // 16 bytes only allows call4; 32 or 48 bytes (+locals) are needed - * // for call8/window_spill8 or call12/window_spill12 respectively. - * : - * - * retw - * - * window_spill_common // instantiates code used by window_spill4 - * - * - * On entry: - * none (if window_spill4) - * stack frame has enough space allocated for call8 (if window_spill8) - * stack frame has enough space allocated for call12 (if window_spill12) - * On exit: - * a4..a15 clobbered (if window_spill4) - * a8..a15 clobbered (if window_spill8) - * a12..a15 clobbered (if window_spill12) - * no caller windows are in live registers - */ - - .macro window_spill4 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call4 .L__wdwspill_assist28 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call4 .L__wdwspill_assist60 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill4 - - .macro window_spill8 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call8 .L__wdwspill_assist24 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call8 .L__wdwspill_assist56 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill8 - - .macro window_spill12 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call12 .L__wdwspill_assist20 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call12 .L__wdwspill_assist52 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill12 - -/*---------------------------------------------------------------------- - * window_spill_function - * - * This macro outputs a function that will spill its caller's callers' - * register windows to the stack. Eg. it could be used to implement - * a version of xthal_window_spill() that works in non-privileged tasks. - * This works for both privileged and non-privileged tasks. - * - * Typical usage: - * - * .text - * .align 4 - * .global my_spill_function - * .type my_spill_function,@function - * my_spill_function: - * window_spill_function - * - * On entry to resulting function: - * none - * On exit from resulting function: - * none (no caller windows are in live registers) - */ - - .macro window_spill_function -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 32 - entry sp, 48 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - call8 .L__wdwspill_assist16 // called with call8, only need another 8 - retw -1: call12 .L__wdwspill_assist16 // called with call4, only need another 12 - retw -2: call4 .L__wdwspill_assist16 // called with call12, only need another 4 - retw -# elif XCHAL_NUM_AREGS == 64 - entry sp, 48 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - call4 .L__wdwspill_assist52 // called with call8, only need a call4 - retw -1: call8 .L__wdwspill_assist52 // called with call4, only need a call8 - retw -2: call12 .L__wdwspill_assist40 // called with call12, can skip a call12 - retw -# elif XCHAL_NUM_AREGS == 16 - entry sp, 16 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - movi a7, 0 // called with call8 - retw -1: movi a11, 0 // called with call4 -2: retw // if called with call12, everything already spilled - -// movi a15, 0 // trick to spill all but the direct caller -// j 1f -// // The entry instruction is magical in the assembler (gets auto-aligned) -// // so we have to jump to it to avoid falling through the padding. -// // We need entry/retw to know where to return. -//1: entry sp, 16 -// retw -# else -# error "unrecognized address register file size" -# endif -#endif /* XCHAL_HAVE_WINDOWED */ - window_spill_common - .endm // window_spill_function - -/*---------------------------------------------------------------------- - * window_spill_common - * - * Common code used by any number of invocations of the window_spill## - * and window_spill_function macros. - * - * Must be instantiated exactly once within a given assembly unit, - * within call/j range of and same section as window_spill## - * macro invocations for that assembly unit. - * (Is automatically instantiated by the window_spill_function macro.) - */ - - .macro window_spill_common -#if XCHAL_HAVE_WINDOWED && (XCHAL_NUM_AREGS == 32 || XCHAL_NUM_AREGS == 64) - .ifndef .L__wdwspill_defined -# if XCHAL_NUM_AREGS >= 64 -.L__wdwspill_assist60: - entry sp, 32 - call8 .L__wdwspill_assist52 - retw -.L__wdwspill_assist56: - entry sp, 16 - call4 .L__wdwspill_assist52 - retw -.L__wdwspill_assist52: - entry sp, 48 - call12 .L__wdwspill_assist40 - retw -.L__wdwspill_assist40: - entry sp, 48 - call12 .L__wdwspill_assist28 - retw -# endif -.L__wdwspill_assist28: - entry sp, 48 - call12 .L__wdwspill_assist16 - retw -.L__wdwspill_assist24: - entry sp, 32 - call8 .L__wdwspill_assist16 - retw -.L__wdwspill_assist20: - entry sp, 16 - call4 .L__wdwspill_assist16 - retw -.L__wdwspill_assist16: - entry sp, 16 - movi a15, 0 - retw - .set .L__wdwspill_defined, 1 - .endif -#endif /* XCHAL_HAVE_WINDOWED with 32 or 64 aregs */ - .endm // window_spill_common - -/*---------------------------------------------------------------------- - * beqi32 - * - * macro implements version of beqi for arbitrary 32-bit immidiate value - * - * beqi32 ax, ay, imm32, label - * - * Compares value in register ax with imm32 value and jumps to label if - * equal. Clobberes register ay if needed - * - */ - .macro beqi32 ax, ay, imm, label - .ifeq ((\imm-1) & ~7) // 1..8 ? - beqi \ax, \imm, \label - .else - .ifeq (\imm+1) // -1 ? - beqi \ax, \imm, \label - .else - .ifeq (\imm) // 0 ? - beqz \ax, \label - .else - // We could also handle immediates 10,12,16,32,64,128,256 - // but it would be a long macro... - movi \ay, \imm - beq \ax, \ay, \label - .endif - .endif - .endif - .endm // beqi32 - -#endif /*XTENSA_COREASM_H*/ - diff --git a/include/asm-xtensa/xtensa/corebits.h b/include/asm-xtensa/xtensa/corebits.h deleted file mode 100644 index e578ade4163..00000000000 --- a/include/asm-xtensa/xtensa/corebits.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef XTENSA_COREBITS_H -#define XTENSA_COREBITS_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * xtensa/corebits.h - Xtensa Special Register field positions and masks. - * - * (In previous releases, these were defined in specreg.h, a generated file. - * This file is not generated, i.e. it is processor configuration independent.) - */ - - -/* EXCCAUSE register fields: */ -#define EXCCAUSE_EXCCAUSE_SHIFT 0 -#define EXCCAUSE_EXCCAUSE_MASK 0x3F -/* Exception causes (mostly incomplete!): */ -#define EXCCAUSE_ILLEGAL 0 -#define EXCCAUSE_SYSCALL 1 -#define EXCCAUSE_IFETCHERROR 2 -#define EXCCAUSE_LOADSTOREERROR 3 -#define EXCCAUSE_LEVEL1INTERRUPT 4 -#define EXCCAUSE_ALLOCA 5 - -/* PS register fields: */ -#define PS_WOE_SHIFT 18 -#define PS_WOE_MASK 0x00040000 -#define PS_WOE PS_WOE_MASK -#define PS_CALLINC_SHIFT 16 -#define PS_CALLINC_MASK 0x00030000 -#define PS_CALLINC(n) (((n)&3)<4) 0 2 or >3 (TBD) - * T1030.0 0 1 (HAL beta) - * T1030.{1,2} 0 3 Equivalent to first release. - * T1030.n (n>=3) 0 >= 3 (TBD) - * T1040.n 1040 n Full CHAL available from T1040.2 - * T1050.n 1050 n Current release. - * - * - * Note: there is a distinction between the software release with - * which something is compiled (accessible using XTHAL_RELEASE_* macros) - * and the software release with which the HAL library was compiled - * (accessible using Xthal_release_* global variables). This - * distinction is particularly relevant for vendors that distribute - * configuration-independent binaries (eg. an OS), where their customer - * might link it with a HAL of a different Xtensa software release. - * In this case, it may be appropriate for the OS to verify at run-time - * whether XTHAL_RELEASE_* and Xthal_release_* are compatible. - * [Guidelines as to which release is compatible with which are not - * currently provided explicitly, but might be inferred from reading - * OSKit documentation for all releases -- compatibility is also highly - * dependent on which HAL features are used. Each release is usually - * backward compatible, with very few exceptions if any.] - * - * Notes: - * Tornado 2.0 supported in T1020.3+, T1030.1+, and T1040.{0,1} only. - * Tornado 2.0.2 supported in T1040.2+, and T1050. - * Compile-time HAL port of NucleusPlus supported by T1040.2+ and T1050. - */ - - -/* - * Architectural limits, independent of configuration. - * Note that these are ISA-defined limits, not micro-architecture implementation - * limits enforced by the Xtensa Processor Generator (which may be stricter than - * these below). - */ -#define XTHAL_MAX_CPS 8 /* max number of coprocessors (0..7) */ -#define XTHAL_MAX_INTERRUPTS 32 /* max number of interrupts (0..31) */ -#define XTHAL_MAX_INTLEVELS 16 /* max number of interrupt levels (0..15) */ - /* (as of T1040, implementation limit is 7: 0..6) */ -#define XTHAL_MAX_TIMERS 4 /* max number of timers (CCOMPARE0..CCOMPARE3) */ - /* (as of T1040, implementation limit is 3: 0..2) */ - -/* Misc: */ -#define XTHAL_LITTLEENDIAN 0 -#define XTHAL_BIGENDIAN 1 - - -/* Interrupt types: */ -#define XTHAL_INTTYPE_UNCONFIGURED 0 -#define XTHAL_INTTYPE_SOFTWARE 1 -#define XTHAL_INTTYPE_EXTERN_EDGE 2 -#define XTHAL_INTTYPE_EXTERN_LEVEL 3 -#define XTHAL_INTTYPE_TIMER 4 -#define XTHAL_INTTYPE_NMI 5 -#define XTHAL_MAX_INTTYPES 6 /* number of interrupt types */ - -/* Timer related: */ -#define XTHAL_TIMER_UNCONFIGURED -1 /* Xthal_timer_interrupt[] value for non-existent timers */ -#define XTHAL_TIMER_UNASSIGNED XTHAL_TIMER_UNCONFIGURED /* (for backwards compatibility only) */ - - -/* Access Mode bits (tentative): */ /* bit abbr unit short_name PPC equ - Description */ -#define XTHAL_AMB_EXCEPTION 0 /* 001 E EX fls: EXception none - generate exception on any access (aka "illegal") */ -#define XTHAL_AMB_HITCACHE 1 /* 002 C CH fls: use Cache on Hit ~(I CI) - use cache on hit -- way from tag match [or H HC, or U UC] (ISA: same, except for Isolate case) */ -#define XTHAL_AMB_ALLOCATE 2 /* 004 A AL fl?: ALlocate none - refill cache on miss -- way from LRU [or F FI fill] (ISA: Read/Write Miss Refill) */ -#define XTHAL_AMB_WRITETHRU 3 /* 008 W WT --s: WriteThrough W WT - store immediately to memory (ISA: same) */ -#define XTHAL_AMB_ISOLATE 4 /* 010 I IS fls: ISolate none - use cache regardless of hit-vs-miss -- way from vaddr (ISA: use-cache-on-miss+hit) */ -#define XTHAL_AMB_GUARD 5 /* 020 G GU ?l?: GUard G * - non-speculative; spec/replay refs not permitted */ -#if 0 -#define XTHAL_AMB_ORDERED x /* 000 O OR fls: ORdered G * - mem accesses cannot be out of order */ -#define XTHAL_AMB_FUSEWRITES x /* 000 F FW --s: FuseWrites none - allow combining/merging multiple writes (to same datapath data unit) into one (implied by writeback) */ -#define XTHAL_AMB_COHERENT x /* 000 M MC fl?: Mem/MP Coherent M - on reads, other CPUs/bus-masters may need to supply data */ -#define XTHAL_AMB_TRUSTED x /* 000 T TR ?l?: TRusted none - memory will not bus error (if it does, handle as fatal imprecise interrupt) */ -#define XTHAL_AMB_PREFETCH x /* 000 P PR fl?: PRefetch none - on refill, read line+1 into prefetch buffers */ -#define XTHAL_AMB_STREAM x /* 000 S ST ???: STreaming none - access one of N stream buffers */ -#endif /*0*/ - -#define XTHAL_AM_EXCEPTION (1< = bit is set - * '-' = bit is clear - * '.' = bit is irrelevant / don't care, as follows: - * E=1 makes all others irrelevant - * W,F relevant only for stores - * "2345" - * Indicates which Xtensa releases support the corresponding - * access mode. Releases for each character column are: - * 2 = prior to T1020.2: T1015 (V1.5), T1020.0, T1020.1 - * 3 = T1020.2 and later: T1020.2+, T1030 - * 4 = T1040 - * 5 = T1050 (maybe) - * And the character column contents are: - * = support by release(s) - * "." = unsupported by release(s) - * "?" = support unknown - */ - /* FOGIWACE 2345 */ -/* For instruction fetch: */ -#define XTHAL_FAM_EXCEPTION 0x001 /* .......E 2345 exception */ -#define XTHAL_FAM_ISOLATE 0x012 /* .--I.-C- .... isolate */ -#define XTHAL_FAM_BYPASS 0x000 /* .---.--- 2345 bypass */ -#define XTHAL_FAM_NACACHED 0x002 /* .---.-C- .... cached no-allocate (frozen) */ -#define XTHAL_FAM_CACHED 0x006 /* .---.AC- 2345 cached */ -/* For data load: */ -#define XTHAL_LAM_EXCEPTION 0x001 /* .......E 2345 exception */ -#define XTHAL_LAM_ISOLATE 0x012 /* .--I.-C- 2345 isolate */ -#define XTHAL_LAM_BYPASS 0x000 /* .O--.--- 2... bypass speculative */ -#define XTHAL_LAM_BYPASSG 0x020 /* .OG-.--- .345 bypass guarded */ -#define XTHAL_LAM_NACACHED 0x002 /* .O--.-C- 2... cached no-allocate speculative */ -#define XTHAL_LAM_NACACHEDG 0x022 /* .OG-.-C- .345 cached no-allocate guarded */ -#define XTHAL_LAM_CACHED 0x006 /* .---.AC- 2345 cached speculative */ -#define XTHAL_LAM_CACHEDG 0x026 /* .?G-.AC- .... cached guarded */ -/* For data store: */ -#define XTHAL_SAM_EXCEPTION 0x001 /* .......E 2345 exception */ -#define XTHAL_SAM_ISOLATE 0x032 /* .-GI--C- 2345 isolate */ -#define XTHAL_SAM_BYPASS 0x028 /* -OG-W--- 2345 bypass */ -/*efine XTHAL_SAM_BYPASSF 0x028*/ /* F-G-W--- ...? bypass write-combined */ -#define XTHAL_SAM_WRITETHRU 0x02A /* -OG-W-C- 234? writethrough */ -/*efine XTHAL_SAM_WRITETHRUF 0x02A*/ /* F-G-W-C- ...5 writethrough write-combined */ -#define XTHAL_SAM_WRITEALLOC 0x02E /* -OG-WAC- ...? writethrough-allocate */ -/*efine XTHAL_SAM_WRITEALLOCF 0x02E*/ /* F-G-WAC- ...? writethrough-allocate write-combined */ -#define XTHAL_SAM_WRITEBACK 0x026 /* F-G--AC- ...5 writeback */ - -#if 0 -/* - Cache attribute encoding for CACHEATTR (per ISA): - (Note: if this differs from ISA Ref Manual, ISA has precedence) - - Inst-fetches Loads Stores - ------------- ------------ ------------- -0x0 FCA_EXCEPTION ?LCA_NACACHED_G* SCA_WRITETHRU "uncached" -0x1 FCA_CACHED LCA_CACHED SCA_WRITETHRU cached -0x2 FCA_BYPASS LCA_BYPASS_G* SCA_BYPASS bypass -0x3 FCA_CACHED LCA_CACHED SCA_WRITEALLOCF write-allocate - or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented) -0x4 FCA_CACHED LCA_CACHED SCA_WRITEBACK write-back - or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented) -0x5..D FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION (reserved) -0xE FCA_EXCEPTION LCA_ISOLATE SCA_ISOLATE isolate -0xF FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION illegal - * Prior to T1020.2?, guard feature not supported, this defaulted to speculative (no _G) -*/ -#endif /*0*/ - - -#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE) -#ifdef __cplusplus -extern "C" { -#endif - -/*---------------------------------------------------------------------- - HAL - ----------------------------------------------------------------------*/ - -/* Constant to be checked in build = (XTHAL_MAJOR_REV<<16)|XTHAL_MINOR_REV */ -extern const unsigned int Xthal_rev_no; - - -/*---------------------------------------------------------------------- - Processor State - ----------------------------------------------------------------------*/ -/* save & restore the extra processor state */ -extern void xthal_save_extra(void *base); -extern void xthal_restore_extra(void *base); - -extern void xthal_save_cpregs(void *base, int); -extern void xthal_restore_cpregs(void *base, int); - -/*extern void xthal_save_all_extra(void *base);*/ -/*extern void xthal_restore_all_extra(void *base);*/ - -/* space for processor state */ -extern const unsigned int Xthal_extra_size; -extern const unsigned int Xthal_extra_align; -/* space for TIE register files */ -extern const unsigned int Xthal_cpregs_size[XTHAL_MAX_CPS]; -extern const unsigned int Xthal_cpregs_align[XTHAL_MAX_CPS]; - -/* total of space for the processor state (for Tor2) */ -extern const unsigned int Xthal_all_extra_size; -extern const unsigned int Xthal_all_extra_align; - -/* initialize the extra processor */ -/*extern void xthal_init_extra(void);*/ -/* initialize the TIE coprocessor */ -/*extern void xthal_init_cp(int);*/ - -/* initialize the extra processor */ -extern void xthal_init_mem_extra(void *); -/* initialize the TIE coprocessor */ -extern void xthal_init_mem_cp(void *, int); - -/* validate & invalidate the TIE register file */ -extern void xthal_validate_cp(int); -extern void xthal_invalidate_cp(int); - -/* the number of TIE coprocessors contiguous from zero (for Tor2) */ -extern const unsigned int Xthal_num_coprocessors; - -/* actual number of coprocessors */ -extern const unsigned char Xthal_cp_num; -/* index of highest numbered coprocessor, plus one */ -extern const unsigned char Xthal_cp_max; -/* index of highest allowed coprocessor number, per cfg, plus one */ -/*extern const unsigned char Xthal_cp_maxcfg;*/ -/* bitmask of which coprocessors are present */ -extern const unsigned int Xthal_cp_mask; - -/* read and write cpenable register */ -extern void xthal_set_cpenable(unsigned); -extern unsigned xthal_get_cpenable(void); - -/* read & write extra state register */ -/*extern int xthal_read_extra(void *base, unsigned reg, unsigned *value);*/ -/*extern int xthal_write_extra(void *base, unsigned reg, unsigned value);*/ - -/* read & write a TIE coprocessor register */ -/*extern int xthal_read_cpreg(void *base, int cp, unsigned reg, unsigned *value);*/ -/*extern int xthal_write_cpreg(void *base, int cp, unsigned reg, unsigned value);*/ - -/* return coprocessor number based on register */ -/*extern int xthal_which_cp(unsigned reg);*/ - -/*---------------------------------------------------------------------- - Interrupts - ----------------------------------------------------------------------*/ - -/* the number of interrupt levels */ -extern const unsigned char Xthal_num_intlevels; -/* the number of interrupts */ -extern const unsigned char Xthal_num_interrupts; - -/* mask for level of interrupts */ -extern const unsigned int Xthal_intlevel_mask[XTHAL_MAX_INTLEVELS]; -/* mask for level 0 to N interrupts */ -extern const unsigned int Xthal_intlevel_andbelow_mask[XTHAL_MAX_INTLEVELS]; - -/* level of each interrupt */ -extern const unsigned char Xthal_intlevel[XTHAL_MAX_INTERRUPTS]; - -/* type per interrupt */ -extern const unsigned char Xthal_inttype[XTHAL_MAX_INTERRUPTS]; - -/* masks of each type of interrupt */ -extern const unsigned int Xthal_inttype_mask[XTHAL_MAX_INTTYPES]; - -/* interrupt numbers assigned to each timer interrupt */ -extern const int Xthal_timer_interrupt[XTHAL_MAX_TIMERS]; - -/*** Virtual interrupt prioritization: ***/ - -/* Convert between interrupt levels (as per PS.INTLEVEL) and virtual interrupt priorities: */ -extern unsigned xthal_vpri_to_intlevel(unsigned vpri); -extern unsigned xthal_intlevel_to_vpri(unsigned intlevel); - -/* Enables/disables given set (mask) of interrupts; returns previous enabled-mask of all ints: */ -extern unsigned xthal_int_enable(unsigned); -extern unsigned xthal_int_disable(unsigned); - -/* Set/get virtual priority of an interrupt: */ -extern int xthal_set_int_vpri(int intnum, int vpri); -extern int xthal_get_int_vpri(int intnum); - -/* Set/get interrupt lockout level for exclusive access to virtual priority data structures: */ -extern void xthal_set_vpri_locklevel(unsigned intlevel); -extern unsigned xthal_get_vpri_locklevel(void); - -/* Set/get current virtual interrupt priority: */ -extern unsigned xthal_set_vpri(unsigned vpri); -extern unsigned xthal_get_vpri(unsigned vpri); -extern unsigned xthal_set_vpri_intlevel(unsigned intlevel); -extern unsigned xthal_set_vpri_lock(void); - - - -/*---------------------------------------------------------------------- - Generic Interrupt Trampolining Support - ----------------------------------------------------------------------*/ - -typedef void (XtHalVoidFunc)(void); - -/* - * Bitmask of interrupts currently trampolining down: - */ -extern unsigned Xthal_tram_pending; - -/* - * Bitmask of which interrupts currently trampolining down - * synchronously are actually enabled; this bitmask is necessary - * because INTENABLE cannot hold that state (sync-trampolining - * interrupts must be kept disabled while trampolining); - * in the current implementation, any bit set here is not set - * in INTENABLE, and vice-versa; once a sync-trampoline is - * handled (at level one), its enable bit must be moved from - * here to INTENABLE: - */ -extern unsigned Xthal_tram_enabled; - -/* - * Bitmask of interrupts configured for sync trampolining: - */ -extern unsigned Xthal_tram_sync; - - -/* Trampoline support functions: */ -extern unsigned xthal_tram_pending_to_service( void ); -extern void xthal_tram_done( unsigned serviced_mask ); -extern int xthal_tram_set_sync( int intnum, int sync ); -extern XtHalVoidFunc* xthal_set_tram_trigger_func( XtHalVoidFunc *trigger_fn ); - -/* INTENABLE,INTREAD,INTSET,INTCLEAR register access functions: */ -extern unsigned xthal_get_intenable( void ); -extern void xthal_set_intenable( unsigned ); -extern unsigned xthal_get_intread( void ); -extern void xthal_set_intset( unsigned ); -extern void xthal_set_intclear( unsigned ); - - -/*---------------------------------------------------------------------- - Register Windows - ----------------------------------------------------------------------*/ - -/* number of registers in register window */ -extern const unsigned int Xthal_num_aregs; -extern const unsigned char Xthal_num_aregs_log2; - -/* This spill any live register windows (other than the caller's): */ -extern void xthal_window_spill( void ); - - -/*---------------------------------------------------------------------- - Cache - ----------------------------------------------------------------------*/ - -/* size of the cache lines in log2(bytes) */ -extern const unsigned char Xthal_icache_linewidth; -extern const unsigned char Xthal_dcache_linewidth; -/* size of the cache lines in bytes */ -extern const unsigned short Xthal_icache_linesize; -extern const unsigned short Xthal_dcache_linesize; -/* number of cache sets in log2(lines per way) */ -extern const unsigned char Xthal_icache_setwidth; -extern const unsigned char Xthal_dcache_setwidth; -/* cache set associativity (number of ways) */ -extern const unsigned int Xthal_icache_ways; -extern const unsigned int Xthal_dcache_ways; -/* size of the caches in bytes (ways * 2^(linewidth + setwidth)) */ -extern const unsigned int Xthal_icache_size; -extern const unsigned int Xthal_dcache_size; -/* cache features */ -extern const unsigned char Xthal_dcache_is_writeback; -extern const unsigned char Xthal_icache_line_lockable; -extern const unsigned char Xthal_dcache_line_lockable; - -/* cache attribute register control (used by other HAL routines) */ -extern unsigned xthal_get_cacheattr( void ); -extern unsigned xthal_get_icacheattr( void ); -extern unsigned xthal_get_dcacheattr( void ); -extern void xthal_set_cacheattr( unsigned ); -extern void xthal_set_icacheattr( unsigned ); -extern void xthal_set_dcacheattr( unsigned ); - -/* initialize cache support (must be called once at startup, before all other cache calls) */ -/*extern void xthal_cache_startinit( void );*/ -/* reset caches */ -/*extern void xthal_icache_reset( void );*/ -/*extern void xthal_dcache_reset( void );*/ -/* enable caches */ -extern void xthal_icache_enable( void ); /* DEPRECATED */ -extern void xthal_dcache_enable( void ); /* DEPRECATED */ -/* disable caches */ -extern void xthal_icache_disable( void ); /* DEPRECATED */ -extern void xthal_dcache_disable( void ); /* DEPRECATED */ - -/* invalidate the caches */ -extern void xthal_icache_all_invalidate( void ); -extern void xthal_dcache_all_invalidate( void ); -extern void xthal_icache_region_invalidate( void *addr, unsigned size ); -extern void xthal_dcache_region_invalidate( void *addr, unsigned size ); -extern void xthal_icache_line_invalidate(void *addr); -extern void xthal_dcache_line_invalidate(void *addr); -/* write dirty data back */ -extern void xthal_dcache_all_writeback( void ); -extern void xthal_dcache_region_writeback( void *addr, unsigned size ); -extern void xthal_dcache_line_writeback(void *addr); -/* write dirty data back and invalidate */ -extern void xthal_dcache_all_writeback_inv( void ); -extern void xthal_dcache_region_writeback_inv( void *addr, unsigned size ); -extern void xthal_dcache_line_writeback_inv(void *addr); -/* prefetch and lock specified memory range into cache */ -extern void xthal_icache_region_lock( void *addr, unsigned size ); -extern void xthal_dcache_region_lock( void *addr, unsigned size ); -extern void xthal_icache_line_lock(void *addr); -extern void xthal_dcache_line_lock(void *addr); -/* unlock from cache */ -extern void xthal_icache_all_unlock( void ); -extern void xthal_dcache_all_unlock( void ); -extern void xthal_icache_region_unlock( void *addr, unsigned size ); -extern void xthal_dcache_region_unlock( void *addr, unsigned size ); -extern void xthal_icache_line_unlock(void *addr); -extern void xthal_dcache_line_unlock(void *addr); - - -/* sync icache and memory */ -extern void xthal_icache_sync( void ); -/* sync dcache and memory */ -extern void xthal_dcache_sync( void ); - -/*---------------------------------------------------------------------- - Debug - ----------------------------------------------------------------------*/ - -/* 1 if debug option configured, 0 if not: */ -extern const int Xthal_debug_configured; - -/* Number of instruction and data break registers: */ -extern const int Xthal_num_ibreak; -extern const int Xthal_num_dbreak; - -/* Set (plant) and remove software breakpoint, both synchronizing cache: */ -extern unsigned int xthal_set_soft_break(void *addr); -extern void xthal_remove_soft_break(void *addr, unsigned int); - - -/*---------------------------------------------------------------------- - Disassembler - ----------------------------------------------------------------------*/ - -/* Max expected size of the return buffer for a disassembled instruction (hint only): */ -#define XTHAL_DISASM_BUFSIZE 80 - -/* Disassembly option bits for selecting what to return: */ -#define XTHAL_DISASM_OPT_ADDR 0x0001 /* display address */ -#define XTHAL_DISASM_OPT_OPHEX 0x0002 /* display opcode bytes in hex */ -#define XTHAL_DISASM_OPT_OPCODE 0x0004 /* display opcode name (mnemonic) */ -#define XTHAL_DISASM_OPT_PARMS 0x0008 /* display parameters */ -#define XTHAL_DISASM_OPT_ALL 0x0FFF /* display everything */ - -/* routine to get a string for the disassembled instruction */ -extern int xthal_disassemble( unsigned char *instr_buf, void *tgt_addr, - char *buffer, unsigned buflen, unsigned options ); - -/* routine to get the size of the next instruction. Returns 0 for - illegal instruction */ -extern int xthal_disassemble_size( unsigned char *instr_buf ); - - -/*---------------------------------------------------------------------- - Core Counter - ----------------------------------------------------------------------*/ - -/* counter info */ -extern const unsigned char Xthal_have_ccount; /* set if CCOUNT register present */ -extern const unsigned char Xthal_num_ccompare; /* number of CCOMPAREn registers */ - -/* get CCOUNT register (if not present return 0) */ -extern unsigned xthal_get_ccount(void); - -/* set and get CCOMPAREn registers (if not present, get returns 0) */ -extern void xthal_set_ccompare(int, unsigned); -extern unsigned xthal_get_ccompare(int); - - -/*---------------------------------------------------------------------- - Instruction/Data RAM/ROM Access - ----------------------------------------------------------------------*/ - -extern void* xthal_memcpy(void *dst, const void *src, unsigned len); -extern void* xthal_bcopy(const void *src, void *dst, unsigned len); - -/*---------------------------------------------------------------------- - MP Synchronization - ----------------------------------------------------------------------*/ -extern int xthal_compare_and_set( int *addr, int test_val, int compare_val ); -extern unsigned xthal_get_prid( void ); - -/*extern const char Xthal_have_s32c1i;*/ -extern const unsigned char Xthal_have_prid; - - -/*---------------------------------------------------------------------- - Miscellaneous - ----------------------------------------------------------------------*/ - -extern const unsigned int Xthal_release_major; -extern const unsigned int Xthal_release_minor; -extern const char * const Xthal_release_name; -extern const char * const Xthal_release_internal; - -extern const unsigned char Xthal_memory_order; -extern const unsigned char Xthal_have_windowed; -extern const unsigned char Xthal_have_density; -extern const unsigned char Xthal_have_booleans; -extern const unsigned char Xthal_have_loops; -extern const unsigned char Xthal_have_nsa; -extern const unsigned char Xthal_have_minmax; -extern const unsigned char Xthal_have_sext; -extern const unsigned char Xthal_have_clamps; -extern const unsigned char Xthal_have_mac16; -extern const unsigned char Xthal_have_mul16; -extern const unsigned char Xthal_have_fp; -extern const unsigned char Xthal_have_speculation; -extern const unsigned char Xthal_have_exceptions; -extern const unsigned char Xthal_xea_version; -extern const unsigned char Xthal_have_interrupts; -extern const unsigned char Xthal_have_highlevel_interrupts; -extern const unsigned char Xthal_have_nmi; - -extern const unsigned short Xthal_num_writebuffer_entries; - -extern const unsigned int Xthal_build_unique_id; -/* Release info for hardware targeted by software upgrades: */ -extern const unsigned int Xthal_hw_configid0; -extern const unsigned int Xthal_hw_configid1; -extern const unsigned int Xthal_hw_release_major; -extern const unsigned int Xthal_hw_release_minor; -extern const char * const Xthal_hw_release_name; -extern const char * const Xthal_hw_release_internal; - - -/* Internal memories... */ - -extern const unsigned char Xthal_num_instrom; -extern const unsigned char Xthal_num_instram; -extern const unsigned char Xthal_num_datarom; -extern const unsigned char Xthal_num_dataram; -extern const unsigned char Xthal_num_xlmi; -extern const unsigned int Xthal_instrom_vaddr[1]; -extern const unsigned int Xthal_instrom_paddr[1]; -extern const unsigned int Xthal_instrom_size [1]; -extern const unsigned int Xthal_instram_vaddr[1]; -extern const unsigned int Xthal_instram_paddr[1]; -extern const unsigned int Xthal_instram_size [1]; -extern const unsigned int Xthal_datarom_vaddr[1]; -extern const unsigned int Xthal_datarom_paddr[1]; -extern const unsigned int Xthal_datarom_size [1]; -extern const unsigned int Xthal_dataram_vaddr[1]; -extern const unsigned int Xthal_dataram_paddr[1]; -extern const unsigned int Xthal_dataram_size [1]; -extern const unsigned int Xthal_xlmi_vaddr[1]; -extern const unsigned int Xthal_xlmi_paddr[1]; -extern const unsigned int Xthal_xlmi_size [1]; - - - -/*---------------------------------------------------------------------- - Memory Management Unit - ----------------------------------------------------------------------*/ - -extern const unsigned char Xthal_have_spanning_way; -extern const unsigned char Xthal_have_identity_map; -extern const unsigned char Xthal_have_mimic_cacheattr; -extern const unsigned char Xthal_have_xlt_cacheattr; -extern const unsigned char Xthal_have_cacheattr; -extern const unsigned char Xthal_have_tlbs; - -extern const unsigned char Xthal_mmu_asid_bits; /* 0 .. 8 */ -extern const unsigned char Xthal_mmu_asid_kernel; -extern const unsigned char Xthal_mmu_rings; /* 1 .. 4 (perhaps 0 if no MMU and/or no protection?) */ -extern const unsigned char Xthal_mmu_ring_bits; -extern const unsigned char Xthal_mmu_sr_bits; -extern const unsigned char Xthal_mmu_ca_bits; -extern const unsigned int Xthal_mmu_max_pte_page_size; -extern const unsigned int Xthal_mmu_min_pte_page_size; - -extern const unsigned char Xthal_itlb_way_bits; -extern const unsigned char Xthal_itlb_ways; -extern const unsigned char Xthal_itlb_arf_ways; -extern const unsigned char Xthal_dtlb_way_bits; -extern const unsigned char Xthal_dtlb_ways; -extern const unsigned char Xthal_dtlb_arf_ways; - -/* Convert between virtual and physical addresses (through static maps only): */ -/*** WARNING: these two functions may go away in a future release; don't depend on them! ***/ -extern int xthal_static_v2p( unsigned vaddr, unsigned *paddrp ); -extern int xthal_static_p2v( unsigned paddr, unsigned *vaddrp, unsigned cached ); - -#if 0 -/******************* EXPERIMENTAL AND TENTATIVE ONLY ********************/ - -#define XTHAL_MMU_PAGESZ_COUNT_MAX 8 /* maximum number of different page sizes */ -extern const char Xthal_mmu_pagesz_count; /* 0 .. 8 number of different page sizes configured */ - -/* Note: the following table doesn't necessarily have page sizes in increasing order: */ -extern const char Xthal_mmu_pagesz_log2[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 10 .. 28 (0 past count) */ - -/* Sorted (increasing) table of page sizes, that indexes into the above table: */ -extern const char Xthal_mmu_pagesz_sorted[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 0 .. 7 (0 past count) */ - -/*u32 Xthal_virtual_exceptions;*/ /* bitmask of which exceptions execute in virtual mode... */ - -extern const char Xthal_mmu_pte_pagesz_log2_min; /* ?? minimum page size in PTEs */ -extern const char Xthal_mmu_pte_pagesz_log2_max; /* ?? maximum page size in PTEs */ - -/* Cache Attribute Bits Implemented by the Cache (part of the cache abstraction) */ -extern const char Xthal_icache_fca_bits_implemented; /* ITLB/UTLB only! */ -extern const char Xthal_dcache_lca_bits_implemented; /* DTLB/UTLB only! */ -extern const char Xthal_dcache_sca_bits_implemented; /* DTLB/UTLB only! */ - -/* Per TLB Parameters (Instruction, Data, Unified) */ -struct XtHalMmuTlb Xthal_itlb; /* description of MMU I-TLB generic features */ -struct XtHalMmuTlb Xthal_dtlb; /* description of MMU D-TLB generic features */ -struct XtHalMmuTlb Xthal_utlb; /* description of MMU U-TLB generic features */ - -#define XTHAL_MMU_WAYS_MAX 8 /* maximum number of ways (associativities) for each TLB */ - -/* Structure for common information described for each possible TLB (instruction, data and unified): */ -typedef struct XtHalMmuTlb { - u8 va_bits; /* 32 (number of virtual address bits) */ - u8 pa_bits; /* 32 (number of physical address bits) */ - bool tlb_va_indexed; /* 1 (set if TLB is indexed by virtual address) */ - bool tlb_va_tagged; /* 0 (set if TLB is tagged by virtual address) */ - bool cache_va_indexed; /* 1 (set if cache is indexed by virtual address) */ - bool cache_va_tagged; /* 0 (set if cache is tagged by virtual address) */ - /*bool (whether page tables are traversed in vaddr sorted order, paddr sorted order, ...) */ - /*u8 (set of available page attribute bits, other than cache attribute bits defined above) */ - /*u32 (various masks for pages, MMU table/TLB entries, etc.) */ - u8 way_count; /* 0 .. 8 (number of ways, a.k.a. associativities, for this TLB) */ - XtHalMmuTlbWay * ways[XTHAL_MMU_WAYS_MAX]; /* pointers to per-way parms for each way */ -} XtHalMmuTlb; - -/* Per TLB Way (Per Associativity) Parameters */ -typedef struct XtHalMmuTlbWay { - u32 index_count_log2; /* 0 .. 4 */ - u32 pagesz_mask; /* 0 .. 2^pagesz_count - 1 (each bit corresponds to a size */ - /* defined in the Xthal_mmu_pagesz_log2[] table) */ - u32 vpn_const_mask; - u32 vpn_const_value; - u64 ppn_const_mask; /* future may support pa_bits > 32 */ - u64 ppn_const_value; - u32 ppn_id_mask; /* paddr bits taken directly from vaddr */ - bool backgnd_match; /* 0 or 1 */ - /* These are defined in terms of the XTHAL_CACHE_xxx bits: */ - u8 fca_const_mask; /* ITLB/UTLB only! */ - u8 fca_const_value; /* ITLB/UTLB only! */ - u8 lca_const_mask; /* DTLB/UTLB only! */ - u8 lca_const_value; /* DTLB/UTLB only! */ - u8 sca_const_mask; /* DTLB/UTLB only! */ - u8 sca_const_value; /* DTLB/UTLB only! */ - /* These define an encoding that map 5 bits in TLB and PTE entries to */ - /* 8 bits (FCA, ITLB), 16 bits (LCA+SCA, DTLB) or 24 bits (FCA+LCA+SCA, UTLB): */ - /* (they may be moved to struct XtHalMmuTlb) */ - u8 ca_bits; /* number of bits in TLB/PTE entries for cache attributes */ - u32 * ca_map; /* pointer to array of 2^ca_bits entries of FCA+LCA+SCA bits */ -} XtHalMmuTlbWay; - -/* - * The way to determine whether protection support is present in core - * is to [look at Xthal_mmu_rings ???]. - * Give info on memory requirements for MMU tables and other in-memory - * data structures (globally, per task, base and per page, etc.) - whatever bounds can be calculated. - */ - - -/* Default vectors: */ -xthal_immu_fetch_miss_vector -xthal_dmmu_load_miss_vector -xthal_dmmu_store_miss_vector - -/* Functions called when a fault is detected: */ -typedef void (XtHalMmuFaultFunc)( unsigned vaddr, ...context... ); -/* Or, */ -/* a? = vaddr */ -/* a? = context... */ -/* PS.xxx = xxx */ -XtHalMMuFaultFunc *Xthal_immu_fetch_fault_func; -XtHalMMuFaultFunc *Xthal_dmmu_load_fault_func; -XtHalMMuFaultFunc *Xthal_dmmu_store_fault_func; - -/* Default Handlers: */ -/* The user and/or kernel exception handlers may jump to these handlers to handle the relevant exceptions, - * according to the value of EXCCAUSE. The exact register state on entry to these handlers is TBD. */ -/* When multiple TLB entries match (hit) on the same access: */ -xthal_immu_fetch_multihit_handler -xthal_dmmu_load_multihit_handler -xthal_dmmu_store_multihit_handler -/* Protection violations according to cache attributes, and other cache attribute mismatches: */ -xthal_immu_fetch_attr_handler -xthal_dmmu_load_attr_handler -xthal_dmmu_store_attr_handler -/* Protection violations due to insufficient ring level: */ -xthal_immu_fetch_priv_handler -xthal_dmmu_load_priv_handler -xthal_dmmu_store_priv_handler -/* Alignment exception handlers (if supported by the particular Xtensa MMU configuration): */ -xthal_dmmu_load_align_handler -xthal_dmmu_store_align_handler - -/* Or, alternatively, the OS user and/or kernel exception handlers may simply jump to the - * following entry points which will handle any values of EXCCAUSE not handled by the OS: */ -xthal_user_exc_default_handler -xthal_kernel_exc_default_handler - -#endif /*0*/ - -#ifdef INCLUDE_DEPRECATED_HAL_CODE -extern const unsigned char Xthal_have_old_exc_arch; -extern const unsigned char Xthal_have_mmu; -extern const unsigned int Xthal_num_regs; -extern const unsigned char Xthal_num_iroms; -extern const unsigned char Xthal_num_irams; -extern const unsigned char Xthal_num_droms; -extern const unsigned char Xthal_num_drams; -extern const unsigned int Xthal_configid0; -extern const unsigned int Xthal_configid1; -#endif - -#ifdef INCLUDE_DEPRECATED_HAL_DEBUG_CODE -#define XTHAL_24_BIT_BREAK 0x80000000 -#define XTHAL_16_BIT_BREAK 0x40000000 -extern const unsigned short Xthal_ill_inst_16[16]; -#define XTHAL_DEST_REG 0xf0000000 /* Mask for destination register */ -#define XTHAL_DEST_REG_INST 0x08000000 /* Branch address is in register */ -#define XTHAL_DEST_REL_INST 0x04000000 /* Branch address is relative */ -#define XTHAL_RFW_INST 0x00000800 -#define XTHAL_RFUE_INST 0x00000400 -#define XTHAL_RFI_INST 0x00000200 -#define XTHAL_RFE_INST 0x00000100 -#define XTHAL_RET_INST 0x00000080 -#define XTHAL_BREAK_INST 0x00000040 -#define XTHAL_SYSCALL_INST 0x00000020 -#define XTHAL_LOOP_END 0x00000010 /* Not set by xthal_inst_type */ -#define XTHAL_JUMP_INST 0x00000008 /* Call or jump instruction */ -#define XTHAL_BRANCH_INST 0x00000004 /* Branch instruction */ -#define XTHAL_24_BIT_INST 0x00000002 -#define XTHAL_16_BIT_INST 0x00000001 -typedef struct xthal_state { - unsigned pc; - unsigned ar[16]; - unsigned lbeg; - unsigned lend; - unsigned lcount; - unsigned extra_ptr; - unsigned cpregs_ptr[XTHAL_MAX_CPS]; -} XTHAL_STATE; -extern unsigned int xthal_inst_type(void *addr); -extern unsigned int xthal_branch_addr(void *addr); -extern unsigned int xthal_get_npc(XTHAL_STATE *user_state); -#endif /* INCLUDE_DEPRECATED_HAL_DEBUG_CODE */ - -#ifdef __cplusplus -} -#endif -#endif /*!__ASSEMBLY__ */ - -#endif /*XTENSA_HAL_H*/ - diff --git a/include/asm-xtensa/xtensa/simcall.h b/include/asm-xtensa/xtensa/simcall.h deleted file mode 100644 index a2b868929a4..00000000000 --- a/include/asm-xtensa/xtensa/simcall.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef SIMCALL_INCLUDED -#define SIMCALL_INCLUDED - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/simcall.h - Simulator call numbers - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -/* - * System call like services offered by the simulator host. - * These are modeled after the Linux 2.4 kernel system calls - * for Xtensa processors. However not all system calls and - * not all functionality of a given system call are implemented, - * or necessarily have well defined or equivalent semantics in - * the context of a simulation (as opposed to a Unix kernel). - * - * These services behave largely as if they had been invoked - * as a task in the simulator host's operating system - * (eg. files accessed are those of the simulator host). - * However, these SIMCALLs model a virtual operating system - * so that various definitions, bit assignments etc - * (eg. open mode bits, errno values, etc) are independent - * of the host operating system used to run the simulation. - * Rather these definitions are specific to the Xtensa ISS. - * This way Xtensa ISA code written to use these SIMCALLs - * can (in principle) be simulated on any host. - * - * Up to 6 parameters are passed in registers a3 to a8 - * (note the 6th parameter isn't passed on the stack, - * unlike windowed function calling conventions). - * The return value is in a2. A negative value in the - * range -4096 to -1 indicates a negated error code to be - * reported in errno with a return value of -1, otherwise - * the value in a2 is returned as is. - */ - -/* These #defines need to match what's in Xtensa/OS/vxworks/xtiss/simcalls.c */ - -#define SYS_nop 0 /* n/a - setup; used to flush register windows */ -#define SYS_exit 1 /*x*/ -#define SYS_fork 2 -#define SYS_read 3 /*x*/ -#define SYS_write 4 /*x*/ -#define SYS_open 5 /*x*/ -#define SYS_close 6 /*x*/ -#define SYS_rename 7 /*x 38 - waitpid */ -#define SYS_creat 8 /*x*/ -#define SYS_link 9 /*x (not implemented on WIN32) */ -#define SYS_unlink 10 /*x*/ -#define SYS_execv 11 /* n/a - execve */ -#define SYS_execve 12 /* 11 - chdir */ -#define SYS_pipe 13 /* 42 - time */ -#define SYS_stat 14 /* 106 - mknod */ -#define SYS_chmod 15 -#define SYS_chown 16 /* 202 - lchown */ -#define SYS_utime 17 /* 30 - break */ -#define SYS_wait 18 /* n/a - oldstat */ -#define SYS_lseek 19 /*x*/ -#define SYS_getpid 20 -#define SYS_isatty 21 /* n/a - mount */ -#define SYS_fstat 22 /* 108 - oldumount */ -#define SYS_time 23 /* 13 - setuid */ -#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */ -#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */ -#define SYS_socket 26 -#define SYS_sendto 27 -#define SYS_recvfrom 28 -#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */ -#define SYS_bind 30 -#define SYS_ioctl 31 - -/* - * Other... - */ -#define SYS_iss_argc 1000 /* returns value of argc */ -#define SYS_iss_argv_size 1001 /* bytes needed for argv & arg strings */ -#define SYS_iss_set_argv 1002 /* saves argv & arg strings at given addr */ - -/* - * SIMCALLs for the ferret memory debugger. All are invoked by - * libferret.a ... ( Xtensa/Target-Libs/ferret ) - */ -#define SYS_ferret 1010 -#define SYS_malloc 1011 -#define SYS_free 1012 -#define SYS_more_heap 1013 -#define SYS_no_heap 1014 - - -/* - * Extra SIMCALLs for GDB: - */ -#define SYS_gdb_break -1 /* invoked by XTOS on user exceptions if EPC points - to a break.n/break, regardless of cause! */ -#define SYS_xmon_out -2 /* invoked by XMON: ... */ -#define SYS_xmon_in -3 /* invoked by XMON: ... */ -#define SYS_xmon_flush -4 /* invoked by XMON: ... */ -#define SYS_gdb_abort -5 /* invoked by XTOS in _xtos_panic() */ -#define SYS_gdb_illegal_inst -6 /* invoked by XTOS for illegal instructions (too deeply) */ -#define SYS_xmon_init -7 /* invoked by XMON: ... */ -#define SYS_gdb_enter_sktloop -8 /* invoked by XTOS on debug exceptions */ - -/* - * SIMCALLs for vxWorks xtiss BSP: - */ -#define SYS_setup_ppp_pipes -83 -#define SYS_log_msg -84 - -/* - * Test SIMCALLs: - */ -#define SYS_test_write_state -100 -#define SYS_test_read_state -101 - -/* - * SYS_select_one specifiers - */ -#define XTISS_SELECT_ONE_READ 1 -#define XTISS_SELECT_ONE_WRITE 2 -#define XTISS_SELECT_ONE_EXCEPT 3 - -#endif /* !SIMCALL_INCLUDED */ diff --git a/include/asm-xtensa/xtensa/xt2000-uart.h b/include/asm-xtensa/xtensa/xt2000-uart.h deleted file mode 100644 index 0154460f0ed..00000000000 --- a/include/asm-xtensa/xtensa/xt2000-uart.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef _uart_h_included_ -#define _uart_h_included_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/xt2000-uart.h -- NatSemi PC16552D DUART - * definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include - - -/* 16550 UART DEVICE REGISTERS - The XT2000 board aligns each register to a 32-bit word but the UART device only uses - one byte of the word, which is the least-significant byte regardless of the - endianness of the core (ie. byte offset 0 for little-endian and 3 for big-endian). - So if using word accesses then endianness doesn't matter. - The macros provided here do that. -*/ -struct uart_dev_s { - union { - unsigned int rxb; /* DLAB=0: receive buffer, read-only */ - unsigned int txb; /* DLAB=0: transmit buffer, write-only */ - unsigned int dll; /* DLAB=1: divisor, least-significant byte latch (was write-only?) */ - } w0; - union { - unsigned int ier; /* DLAB=0: interrupt-enable register (was write-only?) */ - unsigned int dlm; /* DLAB=1: divisor, most-significant byte latch (was write-only?) */ - } w1; - - union { - unsigned int isr; /* DLAB=0: interrupt status register, read-only */ - unsigned int fcr; /* DLAB=0: FIFO control register, write-only */ - unsigned int afr; /* DLAB=1: alternate function register */ - } w2; - - unsigned int lcr; /* line control-register, write-only */ - unsigned int mcr; /* modem control-regsiter, write-only */ - unsigned int lsr; /* line status register, read-only */ - unsigned int msr; /* modem status register, read-only */ - unsigned int scr; /* scratch regsiter, read/write */ -}; - -#define _RXB(u) ((u)->w0.rxb) -#define _TXB(u) ((u)->w0.txb) -#define _DLL(u) ((u)->w0.dll) -#define _IER(u) ((u)->w1.ier) -#define _DLM(u) ((u)->w1.dlm) -#define _ISR(u) ((u)->w2.isr) -#define _FCR(u) ((u)->w2.fcr) -#define _AFR(u) ((u)->w2.afr) -#define _LCR(u) ((u)->lcr) -#define _MCR(u) ((u)->mcr) -#define _LSR(u) ((u)->lsr) -#define _MSR(u) ((u)->msr) -#define _SCR(u) ((u)->scr) - -typedef volatile struct uart_dev_s uart_dev_t; - -/* IER bits */ -#define RCVR_DATA_REG_INTENABLE 0x01 -#define XMIT_HOLD_REG_INTENABLE 0x02 -#define RCVR_STATUS_INTENABLE 0x04 -#define MODEM_STATUS_INTENABLE 0x08 - -/* FCR bits */ -#define _FIFO_ENABLE 0x01 -#define RCVR_FIFO_RESET 0x02 -#define XMIT_FIFO_RESET 0x04 -#define DMA_MODE_SELECT 0x08 -#define RCVR_TRIGGER_LSB 0x40 -#define RCVR_TRIGGER_MSB 0x80 - -/* AFR bits */ -#define AFR_CONC_WRITE 0x01 -#define AFR_BAUDOUT_SEL 0x02 -#define AFR_RXRDY_SEL 0x04 - -/* ISR bits */ -#define INT_STATUS(r) ((r)&1) -#define INT_PRIORITY(r) (((r)>>1)&0x7) - -/* LCR bits */ -#define WORD_LENGTH(n) (((n)-5)&0x3) -#define STOP_BIT_ENABLE 0x04 -#define PARITY_ENABLE 0x08 -#define EVEN_PARITY 0x10 -#define FORCE_PARITY 0x20 -#define XMIT_BREAK 0x40 -#define DLAB_ENABLE 0x80 - -/* MCR bits */ -#define _DTR 0x01 -#define _RTS 0x02 -#define _OP1 0x04 -#define _OP2 0x08 -#define LOOP_BACK 0x10 - -/* LSR Bits */ -#define RCVR_DATA_READY 0x01 -#define OVERRUN_ERROR 0x02 -#define PARITY_ERROR 0x04 -#define FRAMING_ERROR 0x08 -#define BREAK_INTERRUPT 0x10 -#define XMIT_HOLD_EMPTY 0x20 -#define XMIT_EMPTY 0x40 -#define FIFO_ERROR 0x80 -#define RCVR_READY(u) (_LSR(u)&RCVR_DATA_READY) -#define XMIT_READY(u) (_LSR(u)&XMIT_HOLD_EMPTY) - -/* MSR bits */ -#define _RDR 0x01 -#define DELTA_DSR 0x02 -#define DELTA_RI 0x04 -#define DELTA_CD 0x08 -#define _CTS 0x10 -#define _DSR 0x20 -#define _RI 0x40 -#define _CD 0x80 - -/* prototypes */ -void uart_init( uart_dev_t *u, int bitrate ); -void uart_out( uart_dev_t *u, char c ); -void uart_puts( uart_dev_t *u, char *s ); -char uart_in( uart_dev_t *u ); -void uart_enable_rcvr_int( uart_dev_t *u ); -void uart_disable_rcvr_int( uart_dev_t *u ); - -#ifdef DUART16552_1_VADDR -/* DUART present. */ -#define DUART_1_BASE (*(uart_dev_t*)DUART16552_1_VADDR) -#define DUART_2_BASE (*(uart_dev_t*)DUART16552_2_VADDR) -#define UART1_PUTS(s) uart_puts( &DUART_1_BASE, s ) -#define UART2_PUTS(s) uart_puts( &DUART_2_BASE, s ) -#else -/* DUART not configured, use dummy placeholders to allow compiles to work. */ -#define DUART_1_BASE (*(uart_dev_t*)0) -#define DUART_2_BASE (*(uart_dev_t*)0) -#define UART1_PUTS(s) -#define UART2_PUTS(s) -#endif - -/* Compute 16-bit divisor for baudrate generator, with rounding: */ -#define DUART_DIVISOR(crystal,speed) (((crystal)/16 + (speed)/2)/(speed)) - -#endif /*_uart_h_included_*/ - diff --git a/include/asm-xtensa/xtensa/xt2000.h b/include/asm-xtensa/xtensa/xt2000.h deleted file mode 100644 index 703a45002f8..00000000000 --- a/include/asm-xtensa/xtensa/xt2000.h +++ /dev/null @@ -1,408 +0,0 @@ -#ifndef _INC_XT2000_H_ -#define _INC_XT2000_H_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the - * Tensilica XT2000 Emulation Board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include -#include - - -/* - * Default assignment of XT2000 devices to external interrupts. - */ - -/* Ethernet interrupt: */ -#ifdef XCHAL_EXTINT3_NUM -#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM -#define SONIC83934_INTLEVEL XCHAL_EXTINT3_LEVEL -#define SONIC83934_INTMASK XCHAL_EXTINT3_MASK -#else -#define SONIC83934_INTMASK 0 -#endif - -/* DUART channel 1 interrupt (P1 - console): */ -#ifdef XCHAL_EXTINT4_NUM -#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM -#define DUART16552_1_INTLEVEL XCHAL_EXTINT4_LEVEL -#define DUART16552_1_INTMASK XCHAL_EXTINT4_MASK -#else -#define DUART16552_1_INTMASK 0 -#endif - -/* DUART channel 2 interrupt (P2 - 2nd serial port): */ -#ifdef XCHAL_EXTINT5_NUM -#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM -#define DUART16552_2_INTLEVEL XCHAL_EXTINT5_LEVEL -#define DUART16552_2_INTMASK XCHAL_EXTINT5_MASK -#else -#define DUART16552_2_INTMASK 0 -#endif - -/* FPGA-combined PCI/etc interrupts: */ -#ifdef XCHAL_EXTINT6_NUM -#define XT2000_FPGAPCI_INTNUM XCHAL_EXTINT6_NUM -#define XT2000_FPGAPCI_INTLEVEL XCHAL_EXTINT6_LEVEL -#define XT2000_FPGAPCI_INTMASK XCHAL_EXTINT6_MASK -#else -#define XT2000_FPGAPCI_INTMASK 0 -#endif - - - -/* - * Device addresses. - * - * Note: for endianness-independence, use 32-bit loads and stores for all - * register accesses to Ethernet, DUART and LED devices. Undefined bits - * may need to be masked out if needed when reading if the actual register - * size is smaller than 32 bits. - * - * Note: XT2000 bus byte lanes are defined in terms of msbyte and lsbyte - * relative to the processor. So 32-bit registers are accessed consistently - * from both big and little endian processors. However, this means byte - * sequences are not consistent between big and little endian processors. - * This is fine for RAM, and for ROM if ROM is created for a specific - * processor (and thus has correct byte sequences). However this may be - * unexpected for Flash, which might contain a file-system that one wants - * to use for multiple processor configurations (eg. the Flash might contain - * the Ethernet card's address, endianness-independent application data, etc). - * That is, byte sequences written in Flash by a core of a given endianness - * will be byte-swapped when seen by a core of the other endianness. - * Someone implementing an endianness-independent Flash file system will - * likely handle this byte-swapping issue in the Flash driver software. - */ - -#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */ -#define XTBOARD_FLASH_MAXSIZE 0x4000000 /* 64 MB (max; depends on what is socketed!) */ -#define XTBOARD_EPROM_MAXSIZE 0x0400000 /* 4 MB (max; depends on what is socketed!) */ -#define XTBOARD_EEPROM_MAXSIZE 0x0080000 /* 512 kB (max; depends on what is socketed!) */ -#define XTBOARD_ASRAM_SIZE 0x0100000 /* 1 MB */ -#define XTBOARD_PCI_MEM_SIZE 0x8000000 /* 128 MB (allocated) */ -#define XTBOARD_PCI_IO_SIZE 0x1000000 /* 16 MB (allocated) */ - -#ifdef XSHAL_IOBLOCK_BYPASS_PADDR -/* PCI memory space: */ -# define XTBOARD_PCI_MEM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000) -/* Socketed Flash (eg. 2 x 16-bit devices): */ -# define XTBOARD_FLASH_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000) -/* PCI I/O space: */ -# define XTBOARD_PCI_IO_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000) -/* V3 PCI interface chip register/config space: */ -# define XTBOARD_V3PCI_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000) -/* Bus Interface registers: */ -# define XTBOARD_BUSINT_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000) -/* FPGA registers: */ -# define XT2000_FPGAREGS_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000) -/* SONIC SN83934 Ethernet controller/transceiver: */ -# define SONIC83934_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000) -/* 8-character bitmapped LED display: */ -# define XTBOARD_LED_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000) -/* National-Semi PC16552D DUART: */ -# define DUART16552_1_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020) /* channel 1 (P1 - console) */ -# define DUART16552_2_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000) /* channel 2 (P2) */ -/* Asynchronous Static RAM: */ -# define XTBOARD_ASRAM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000) -/* 8-bit EEPROM: */ -# define XTBOARD_EEPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000) -/* 2 x 16-bit EPROMs: */ -# define XTBOARD_EPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_BYPASS_PADDR */ - -/* These devices might be accessed cached: */ -#ifdef XSHAL_IOBLOCK_CACHED_PADDR -# define XTBOARD_PCI_MEM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x0000000) -# define XTBOARD_FLASH_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x8000000) -# define XTBOARD_ASRAM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD400000) -# define XTBOARD_EEPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD600000) -# define XTBOARD_EPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_CACHED_PADDR */ - - -/*** Same thing over again, this time with virtual addresses: ***/ - -#ifdef XSHAL_IOBLOCK_BYPASS_VADDR -/* PCI memory space: */ -# define XTBOARD_PCI_MEM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000) -/* Socketed Flash (eg. 2 x 16-bit devices): */ -# define XTBOARD_FLASH_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000) -/* PCI I/O space: */ -# define XTBOARD_PCI_IO_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000) -/* V3 PCI interface chip register/config space: */ -# define XTBOARD_V3PCI_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000) -/* Bus Interface registers: */ -# define XTBOARD_BUSINT_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000) -/* FPGA registers: */ -# define XT2000_FPGAREGS_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000) -/* SONIC SN83934 Ethernet controller/transceiver: */ -# define SONIC83934_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000) -/* 8-character bitmapped LED display: */ -# define XTBOARD_LED_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000) -/* National-Semi PC16552D DUART: */ -# define DUART16552_1_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020) /* channel 1 (P1 - console) */ -# define DUART16552_2_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000) /* channel 2 (P2) */ -/* Asynchronous Static RAM: */ -# define XTBOARD_ASRAM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000) -/* 8-bit EEPROM: */ -# define XTBOARD_EEPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000) -/* 2 x 16-bit EPROMs: */ -# define XTBOARD_EPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_BYPASS_VADDR */ - -/* These devices might be accessed cached: */ -#ifdef XSHAL_IOBLOCK_CACHED_VADDR -# define XTBOARD_PCI_MEM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x0000000) -# define XTBOARD_FLASH_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x8000000) -# define XTBOARD_ASRAM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD400000) -# define XTBOARD_EEPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD600000) -# define XTBOARD_EPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_CACHED_VADDR */ - - -/* System ROM: */ -#define XTBOARD_ROM_SIZE XSHAL_ROM_SIZE -#ifdef XSHAL_ROM_VADDR -#define XTBOARD_ROM_VADDR XSHAL_ROM_VADDR -#endif -#ifdef XSHAL_ROM_PADDR -#define XTBOARD_ROM_PADDR XSHAL_ROM_PADDR -#endif - -/* System RAM: */ -#define XTBOARD_RAM_SIZE XSHAL_RAM_SIZE -#ifdef XSHAL_RAM_VADDR -#define XTBOARD_RAM_VADDR XSHAL_RAM_VADDR -#endif -#ifdef XSHAL_RAM_PADDR -#define XTBOARD_RAM_PADDR XSHAL_RAM_PADDR -#endif -#define XTBOARD_RAM_BYPASS_VADDR XSHAL_RAM_BYPASS_VADDR -#define XTBOARD_RAM_BYPASS_PADDR XSHAL_RAM_BYPASS_PADDR - - - -/* - * Things that depend on device addresses. - */ - - -#define XTBOARD_CACHEATTR_WRITEBACK XSHAL_XT2000_CACHEATTR_WRITEBACK -#define XTBOARD_CACHEATTR_WRITEALLOC XSHAL_XT2000_CACHEATTR_WRITEALLOC -#define XTBOARD_CACHEATTR_WRITETHRU XSHAL_XT2000_CACHEATTR_WRITETHRU -#define XTBOARD_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS -#define XTBOARD_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT - -#define XTBOARD_BUSINT_PIPE_REGIONS XSHAL_XT2000_PIPE_REGIONS -#define XTBOARD_BUSINT_SDRAM_REGIONS XSHAL_XT2000_SDRAM_REGIONS - - - -/* - * BusLogic (FPGA) registers. - * All these registers are normally accessed using 32-bit loads/stores. - */ - -/* Register offsets: */ -#define XT2000_DATECD_OFS 0x00 /* date code (read-only) */ -#define XT2000_STSREG_OFS 0x04 /* status (read-only) */ -#define XT2000_SYSLED_OFS 0x08 /* system LED */ -#define XT2000_WRPROT_OFS 0x0C /* write protect */ -#define XT2000_SWRST_OFS 0x10 /* software reset */ -#define XT2000_SYSRST_OFS 0x14 /* system (peripherals) reset */ -#define XT2000_IMASK_OFS 0x18 /* interrupt mask */ -#define XT2000_ISTAT_OFS 0x1C /* interrupt status */ -#define XT2000_V3CFG_OFS 0x20 /* V3 config (V320 PCI) */ - -/* Physical register addresses: */ -#ifdef XT2000_FPGAREGS_PADDR -#define XT2000_DATECD_PADDR (XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS) -#define XT2000_STSREG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS) -#define XT2000_SYSLED_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS) -#define XT2000_WRPROT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS) -#define XT2000_SWRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS) -#define XT2000_SYSRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS) -#define XT2000_IMASK_PADDR (XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS) -#define XT2000_ISTAT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS) -#define XT2000_V3CFG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS) -#endif - -/* Virtual register addresses: */ -#ifdef XT2000_FPGAREGS_VADDR -#define XT2000_DATECD_VADDR (XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS) -#define XT2000_STSREG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS) -#define XT2000_SYSLED_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS) -#define XT2000_WRPROT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS) -#define XT2000_SWRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS) -#define XT2000_SYSRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS) -#define XT2000_IMASK_VADDR (XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS) -#define XT2000_ISTAT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS) -#define XT2000_V3CFG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS) -/* Register access (for C code): */ -#define XT2000_DATECD_REG (*(volatile unsigned*) XT2000_DATECD_VADDR) -#define XT2000_STSREG_REG (*(volatile unsigned*) XT2000_STSREG_VADDR) -#define XT2000_SYSLED_REG (*(volatile unsigned*) XT2000_SYSLED_VADDR) -#define XT2000_WRPROT_REG (*(volatile unsigned*) XT2000_WRPROT_VADDR) -#define XT2000_SWRST_REG (*(volatile unsigned*) XT2000_SWRST_VADDR) -#define XT2000_SYSRST_REG (*(volatile unsigned*) XT2000_SYSRST_VADDR) -#define XT2000_IMASK_REG (*(volatile unsigned*) XT2000_IMASK_VADDR) -#define XT2000_ISTAT_REG (*(volatile unsigned*) XT2000_ISTAT_VADDR) -#define XT2000_V3CFG_REG (*(volatile unsigned*) XT2000_V3CFG_VADDR) -#endif - -/* DATECD (date code) bit fields: */ - -/* BCD-coded month (01..12): */ -#define XT2000_DATECD_MONTH_SHIFT 24 -#define XT2000_DATECD_MONTH_BITS 8 -#define XT2000_DATECD_MONTH_MASK 0xFF000000 -/* BCD-coded day (01..31): */ -#define XT2000_DATECD_DAY_SHIFT 16 -#define XT2000_DATECD_DAY_BITS 8 -#define XT2000_DATECD_DAY_MASK 0x00FF0000 -/* BCD-coded year (2001..9999): */ -#define XT2000_DATECD_YEAR_SHIFT 0 -#define XT2000_DATECD_YEAR_BITS 16 -#define XT2000_DATECD_YEAR_MASK 0x0000FFFF - -/* STSREG (status) bit fields: */ - -/* Switch SW3 setting bit fields (0=off/up, 1=on/down): */ -#define XT2000_STSREG_SW3_SHIFT 0 -#define XT2000_STSREG_SW3_BITS 4 -#define XT2000_STSREG_SW3_MASK 0x0000000F -/* Boot-select bits of switch SW3: */ -#define XT2000_STSREG_BOOTSEL_SHIFT 0 -#define XT2000_STSREG_BOOTSEL_BITS 2 -#define XT2000_STSREG_BOOTSEL_MASK 0x00000003 -/* Boot-select values: */ -#define XT2000_STSREG_BOOTSEL_FLASH 0 -#define XT2000_STSREG_BOOTSEL_EPROM16 1 -#define XT2000_STSREG_BOOTSEL_PROM8 2 -#define XT2000_STSREG_BOOTSEL_ASRAM 3 -/* User-defined bits of switch SW3: */ -#define XT2000_STSREG_SW3_2_SHIFT 2 -#define XT2000_STSREG_SW3_2_MASK 0x00000004 -#define XT2000_STSREG_SW3_3_SHIFT 3 -#define XT2000_STSREG_SW3_3_MASK 0x00000008 - -/* SYSLED (system LED) bit fields: */ - -/* LED control bit (0=off, 1=on): */ -#define XT2000_SYSLED_LEDON_SHIFT 0 -#define XT2000_SYSLED_LEDON_MASK 0x00000001 - -/* WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]): */ - -/* Flash write protect: */ -#define XT2000_WRPROT_FLWP_SHIFT 0 -#define XT2000_WRPROT_FLWP_MASK 0x00000001 -/* Reserved but present write protect bits: */ -#define XT2000_WRPROT_WRP_SHIFT 1 -#define XT2000_WRPROT_WRP_BITS 7 -#define XT2000_WRPROT_WRP_MASK 0x000000FE - -/* SWRST (software reset; allows s/w to generate power-on equivalent reset): */ - -/* Software reset bits: */ -#define XT2000_SWRST_SWR_SHIFT 0 -#define XT2000_SWRST_SWR_BITS 16 -#define XT2000_SWRST_SWR_MASK 0x0000FFFF -/* Software reset value -- writing this value resets the board: */ -#define XT2000_SWRST_RESETVALUE 0x0000DEAD - -/* SYSRST (system reset; controls reset of individual peripherals): */ - -/* All-device reset: */ -#define XT2000_SYSRST_ALL_SHIFT 0 -#define XT2000_SYSRST_ALL_BITS 4 -#define XT2000_SYSRST_ALL_MASK 0x0000000F -/* HDSP-2534 LED display reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_LED_SHIFT 0 -#define XT2000_SYSRST_LED_MASK 0x00000001 -/* Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_SONIC_SHIFT 1 -#define XT2000_SYSRST_SONIC_MASK 0x00000002 -/* DP16552 DUART reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_DUART_SHIFT 2 -#define XT2000_SYSRST_DUART_MASK 0x00000004 -/* V3 V320 PCI bridge controller reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_V3_SHIFT 3 -#define XT2000_SYSRST_V3_MASK 0x00000008 - -/* IMASK (interrupt mask; 0=disable, 1=enable): */ -/* ISTAT (interrupt status; 0=inactive, 1=pending): */ - -/* PCI INTP interrupt: */ -#define XT2000_INTMUX_PCI_INTP_SHIFT 2 -#define XT2000_INTMUX_PCI_INTP_MASK 0x00000004 -/* PCI INTS interrupt: */ -#define XT2000_INTMUX_PCI_INTS_SHIFT 3 -#define XT2000_INTMUX_PCI_INTS_MASK 0x00000008 -/* PCI INTD interrupt: */ -#define XT2000_INTMUX_PCI_INTD_SHIFT 4 -#define XT2000_INTMUX_PCI_INTD_MASK 0x00000010 -/* V320 PCI controller interrupt: */ -#define XT2000_INTMUX_V3_SHIFT 5 -#define XT2000_INTMUX_V3_MASK 0x00000020 -/* PCI ENUM interrupt: */ -#define XT2000_INTMUX_PCI_ENUM_SHIFT 6 -#define XT2000_INTMUX_PCI_ENUM_MASK 0x00000040 -/* PCI DEG interrupt: */ -#define XT2000_INTMUX_PCI_DEG_SHIFT 7 -#define XT2000_INTMUX_PCI_DEG_MASK 0x00000080 - -/* V3CFG (V3 config, V320 PCI controller): */ - -/* V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]): */ -#define XT2000_V3CFG_V3ADC_SHIFT 0 -#define XT2000_V3CFG_V3ADC_MASK 0x00000001 - -/* I2C Devices */ - -#define XT2000_I2C_RTC_ID 0x68 -#define XT2000_I2C_NVRAM0_ID 0x56 /* 1st 256 byte block */ -#define XT2000_I2C_NVRAM1_ID 0x57 /* 2nd 256 byte block */ - -/* NVRAM Board Info structure: */ - -#define XT2000_NVRAM_SIZE 512 - -#define XT2000_NVRAM_BINFO_START 0x100 -#define XT2000_NVRAM_BINFO_SIZE 0x20 -#define XT2000_NVRAM_BINFO_VERSION 0x10 /* version 1.0 */ -#if 0 -#define XT2000_NVRAM_BINFO_VERSION_OFFSET 0x00 -#define XT2000_NVRAM_BINFO_VERSION_SIZE 0x1 -#define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET 0x02 -#define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE 0x6 -#define XT2000_NVRAM_BINFO_SN_OFFSET 0x10 -#define XT2000_NVRAM_BINFO_SN_SIZE 0xE -#define XT2000_NVRAM_BINFO_CRC_OFFSET 0x1E -#define XT2000_NVRAM_BINFO_CRC_SIZE 0x2 -#endif /*0*/ - -#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE) -typedef struct xt2000_nvram_binfo { - unsigned char version; - unsigned char reserved1; - unsigned char eth_addr[6]; - unsigned char reserved8[8]; - unsigned char serialno[14]; - unsigned char crc[2]; /* 16-bit CRC */ -} xt2000_nvram_binfo; -#endif /*!__ASSEMBLY__ && !_NOCLANGUAGE*/ - - -#endif /*_INC_XT2000_H_*/ - diff --git a/include/asm-xtensa/xtensa/xtboard.h b/include/asm-xtensa/xtensa/xtboard.h deleted file mode 100644 index 22469c17530..00000000000 --- a/include/asm-xtensa/xtensa/xtboard.h +++ /dev/null @@ -1,120 +0,0 @@ -#ifndef _xtboard_h_included_ -#define _xtboard_h_included_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * xtboard.h -- Routines for getting useful information from the board. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include - -#define XTBOARD_RTC_ERROR -1 -#define XTBOARD_RTC_STOPPED -2 - - -/* xt2000-i2cdev.c: */ -typedef void XtboardDelayFunc( unsigned ); -extern XtboardDelayFunc* xtboard_set_nsdelay_func( XtboardDelayFunc *delay_fn ); -extern int xtboard_i2c_read (unsigned id, unsigned char *buf, unsigned addr, unsigned size); -extern int xtboard_i2c_write(unsigned id, unsigned char *buf, unsigned addr, unsigned size); -extern int xtboard_i2c_wait_nvram_ack(unsigned id, unsigned swtimer); - -/* xtboard.c: */ -extern int xtboard_nvram_read (unsigned addr, unsigned len, unsigned char *buf); -extern int xtboard_nvram_write(unsigned addr, unsigned len, unsigned char *buf); -extern int xtboard_nvram_binfo_read (xt2000_nvram_binfo *buf); -extern int xtboard_nvram_binfo_write(xt2000_nvram_binfo *buf); -extern int xtboard_nvram_binfo_valid(xt2000_nvram_binfo *buf); -extern int xtboard_ethermac_get(unsigned char *buf); -extern int xtboard_ethermac_set(unsigned char *buf); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_get_rtc_time -/ -/ Description: Get time stored in real-time clock. -/ -/ Returns: time in seconds stored in real-time clock. -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_get_rtc_time(void); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_set_rtc_time -/ -/ Description: Set time stored in real-time clock. -/ -/ Parameters: time -- time in seconds to store to real-time clock -/ -/ Returns: 0 on success, xtboard_i2c_write() error code otherwise. -/-**----------------------------------------------------------------------------*/ - -extern int xtboard_set_rtc_time(unsigned time); - - -/* xtfreq.c: */ -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_measure_sys_clk -/ -/ Description: Get frequency of system clock. -/ -/ Parameters: none -/ -/ Returns: frequency of system clock. -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_measure_sys_clk(void); - - -#if 0 /* old stuff from xtboard.c: */ - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_nvram valid -/ -/ Description: Determines if data in NVRAM is valid. -/ -/ Parameters: delay -- 10us delay function -/ -/ Returns: 1 if NVRAM is valid, 0 otherwise -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_nvram_valid(void (*delay)( void )); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_get_nvram_contents -/ -/ Description: Returns contents of NVRAM. -/ -/ Parameters: buf -- buffer to NVRAM contents. -/ delay -- 10us delay function -/ -/ Returns: 1 if NVRAM is valid, 0 otherwise -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_get_nvram_contents(unsigned char *buf, void (*delay)( void )); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_get_ether_addr -/ -/ Description: Returns ethernet address of board. -/ -/ Parameters: buf -- buffer to store ethernet address -/ delay -- 10us delay function -/ -/ Returns: nothing. -/-**----------------------------------------------------------------------------*/ - -extern void xtboard_get_ether_addr(unsigned char *buf, void (*delay)( void )); - -#endif /*0*/ - - -#endif /*_xtboard_h_included_*/ - -- cgit v1.2.3 From fc4fb2adf944d45a7f3d4d38df991c79ffdb6a43 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 10 Dec 2006 02:18:52 -0800 Subject: [PATCH] xtensa: fix system call interface This is a long outstanding patch to finally fix the syscall interface. The constants used for the system calls are those we have provided in our libc patches. This patch also fixes the shmbuf and stat structure, and fcntl definitions. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-xtensa/fcntl.h | 98 +++-- include/asm-xtensa/posix_types.h | 2 +- include/asm-xtensa/shmbuf.h | 21 ++ include/asm-xtensa/stat.h | 112 ++---- include/asm-xtensa/syscall.h | 20 + include/asm-xtensa/unistd.h | 795 +++++++++++++++++++++++++++++---------- 6 files changed, 736 insertions(+), 312 deletions(-) create mode 100644 include/asm-xtensa/syscall.h (limited to 'include') diff --git a/include/asm-xtensa/fcntl.h b/include/asm-xtensa/fcntl.h index ec066ae96ca..0609fc691b7 100644 --- a/include/asm-xtensa/fcntl.h +++ b/include/asm-xtensa/fcntl.h @@ -14,48 +14,86 @@ /* open/fcntl - O_SYNC is only implemented on blocks devices and on files located on an ext2 file system */ -#define O_APPEND 0x0008 -#define O_SYNC 0x0010 -#define O_NONBLOCK 0x0080 -#define O_CREAT 0x0100 /* not fcntl */ -#define O_EXCL 0x0400 /* not fcntl */ -#define O_NOCTTY 0x0800 /* not fcntl */ -#define FASYNC 0x1000 /* fcntl, for BSD compatibility */ -#define O_LARGEFILE 0x2000 /* allow large file opens - currently ignored */ -#define O_DIRECT 0x8000 /* direct disk access hint - currently ignored*/ -#define O_NOATIME 0x100000 - -#define F_GETLK 14 -#define F_GETLK64 15 +#define O_ACCMODE 0003 +#define O_RDONLY 00 +#define O_WRONLY 01 +#define O_RDWR 02 +#define O_CREAT 0100 /* not fcntl */ +#define O_EXCL 0200 /* not fcntl */ +#define O_NOCTTY 0400 /* not fcntl */ +#define O_TRUNC 01000 /* not fcntl */ +#define O_APPEND 02000 +#define O_NONBLOCK 04000 +#define O_NDELAY O_NONBLOCK +#define O_SYNC 010000 +#define FASYNC 020000 /* fcntl, for BSD compatibility */ +#define O_DIRECT 040000 /* direct disk access hint */ +#define O_LARGEFILE 0100000 +#define O_DIRECTORY 0200000 /* must be a directory */ +#define O_NOFOLLOW 0400000 /* don't follow links */ +#define O_NOATIME 01000000 + +#define F_DUPFD 0 /* dup */ +#define F_GETFD 1 /* get close_on_exec */ +#define F_SETFD 2 /* set/clear close_on_exec */ +#define F_GETFL 3 /* get file->f_flags */ +#define F_SETFL 4 /* set file->f_flags */ +#define F_GETLK 5 #define F_SETLK 6 #define F_SETLKW 7 -#define F_SETLK64 16 -#define F_SETLKW64 17 -#define F_SETOWN 24 /* for sockets. */ -#define F_GETOWN 23 /* for sockets. */ +#define F_SETOWN 8 /* for sockets. */ +#define F_GETOWN 9 /* for sockets. */ +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +/* for F_[GET|SET]FL */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 0 +#define F_WRLCK 1 +#define F_UNLCK 2 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ -typedef struct flock { +/* for leases */ +#define F_INPROGRESS 16 + +/* operations for bsd flock(), also used by the kernel implementation */ +#define LOCK_SH 1 /* shared lock */ +#define LOCK_EX 2 /* exclusive lock */ +#define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +#define LOCK_UN 8 /* remove lock */ + +#define LOCK_MAND 32 /* This is a mandatory flock */ +#define LOCK_READ 64 /* ... Which allows concurrent read operations */ +#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */ +#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */ + +struct flock { short l_type; short l_whence; - __kernel_off_t l_start; - __kernel_off_t l_len; - long l_sysid; - __kernel_pid_t l_pid; - long pad[4]; -} flock_t; + off_t l_start; + off_t l_len; + pid_t l_pid; +}; struct flock64 { short l_type; short l_whence; - __kernel_off_t l_start; - __kernel_off_t l_len; + loff_t l_start; + loff_t l_len; pid_t l_pid; }; -#define HAVE_ARCH_STRUCT_FLOCK -#define HAVE_ARCH_STRUCT_FLOCK64 - -#include +#define F_LINUX_SPECIFIC_BASE 1024 #endif /* _XTENSA_FCNTL_H */ diff --git a/include/asm-xtensa/posix_types.h b/include/asm-xtensa/posix_types.h index 2c816b0e776..3470b44c12c 100644 --- a/include/asm-xtensa/posix_types.h +++ b/include/asm-xtensa/posix_types.h @@ -21,7 +21,7 @@ typedef unsigned long __kernel_ino_t; typedef unsigned int __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; +typedef unsigned long __kernel_nlink_t; typedef long __kernel_off_t; typedef int __kernel_pid_t; typedef unsigned short __kernel_ipc_pid_t; diff --git a/include/asm-xtensa/shmbuf.h b/include/asm-xtensa/shmbuf.h index a30b81a4b93..ad4b0121782 100644 --- a/include/asm-xtensa/shmbuf.h +++ b/include/asm-xtensa/shmbuf.h @@ -19,6 +19,7 @@ #ifndef _XTENSA_SHMBUF_H #define _XTENSA_SHMBUF_H +#if defined (__XTENSA_EL__) struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ size_t shm_segsz; /* size of segment (bytes) */ @@ -34,6 +35,26 @@ struct shmid64_ds { unsigned long __unused4; unsigned long __unused5; }; +#elif defined (__XTENSA_EB__) +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; +#else +# error endian order not defined +#endif + struct shminfo64 { unsigned long shmmax; diff --git a/include/asm-xtensa/stat.h b/include/asm-xtensa/stat.h index 2f4662ff6c3..149f4bce092 100644 --- a/include/asm-xtensa/stat.h +++ b/include/asm-xtensa/stat.h @@ -13,93 +13,57 @@ #include -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - #define STAT_HAVE_NSEC 1 struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; + unsigned long st_dev; + ino_t st_ino; + mode_t st_mode; + nlink_t st_nlink; + uid_t st_uid; + gid_t st_gid; + unsigned int st_rdev; + off_t st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; }; -/* This matches struct stat64 in glibc-2.2.3. */ +/* This matches struct stat64 in glibc-2.3 */ struct stat64 { -#ifdef __XTENSA_EL__ - unsigned short st_dev; /* Device */ - unsigned char __pad0[10]; -#else - unsigned char __pad0[6]; - unsigned short st_dev; - unsigned char __pad1[2]; -#endif - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; /* 32bit file serial number. */ - + unsigned long long st_dev; /* Device */ + unsigned long long st_ino; /* File serial number */ unsigned int st_mode; /* File mode. */ unsigned int st_nlink; /* Link count. */ unsigned int st_uid; /* User ID of the file's owner. */ unsigned int st_gid; /* Group ID of the file's group. */ - -#ifdef __XTENSA_EL__ - unsigned short st_rdev; /* Device number, if device. */ - unsigned char __pad3[10]; -#else - unsigned char __pad2[6]; - unsigned short st_rdev; - unsigned char __pad3[2]; -#endif - - long long int st_size; /* Size of file, in bytes. */ - long int st_blksize; /* Optimal block size for I/O. */ - -#ifdef __XTENSA_EL__ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; + unsigned long long st_rdev; /* Device number, if device. */ + long long st_size; /* Size of file, in bytes. */ + long st_blksize; /* Optimal block size for I/O. */ + unsigned long __unused2; +#ifdef __XTENSA_EB__ + unsigned long __unused3; + long st_blocks; /* Number 512-byte blocks allocated. */ #else - unsigned long __pad4; - unsigned long st_blocks; + long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __unused3; #endif - - unsigned long __pad5; - long int st_atime; /* Time of last access. */ - unsigned long st_atime_nsec; - long int st_mtime; /* Time of last modification. */ - unsigned long st_mtime_nsec; - long int st_ctime; /* Time of last status change. */ - unsigned long st_ctime_nsec; - unsigned long long int st_ino; /* File serial number. */ + long st_atime; /* Time of last access. */ + unsigned long st_atime_nsec; + long st_mtime; /* Time of last modification. */ + unsigned long st_mtime_nsec; + long st_ctime; /* Time of last status change. */ + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; }; #endif /* _XTENSA_STAT_H */ diff --git a/include/asm-xtensa/syscall.h b/include/asm-xtensa/syscall.h new file mode 100644 index 00000000000..6cb0d42f11c --- /dev/null +++ b/include/asm-xtensa/syscall.h @@ -0,0 +1,20 @@ +struct pt_regs; +struct sigaction; +asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); +asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*); +asmlinkage long xtensa_pipe(int __user *); +asmlinkage long xtensa_mmap2(unsigned long, unsigned long, unsigned long, + unsigned long, unsigned long, unsigned long); +asmlinkage long xtensa_ptrace(long, long, long, long); +asmlinkage long xtensa_sigreturn(struct pt_regs*); +asmlinkage long xtensa_rt_sigreturn(struct pt_regs*); +asmlinkage long xtensa_sigsuspend(struct pt_regs*); +asmlinkage long xtensa_rt_sigsuspend(struct pt_regs*); +asmlinkage long xtensa_sigaction(int, const struct old_sigaction*, + struct old_sigaction*); +asmlinkage long xtensa_sigaltstack(struct pt_regs *regs); +asmlinkage long sys_rt_sigaction(int, + const struct sigaction __user *, + struct sigaction __user *, + size_t); +asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg); diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h index 15b0932523d..8a7fb6964ce 100644 --- a/include/asm-xtensa/unistd.h +++ b/include/asm-xtensa/unistd.h @@ -11,212 +11,591 @@ #ifndef _XTENSA_UNISTD_H #define _XTENSA_UNISTD_H -#define __NR_spill 0 -#define __NR_exit 1 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_ptrace 26 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_cacheflush 147 -#define __NR_cachectl 148 -#define __NR_sysxtensa 149 -#define __NR_sysdummy 150 -#define __NR_getsid 151 -#define __NR_fdatasync 152 -#define __NR__sysctl 153 -#define __NR_mlock 154 -#define __NR_munlock 155 -#define __NR_mlockall 156 -#define __NR_munlockall 157 -#define __NR_sched_setparam 158 -#define __NR_sched_getparam 159 -#define __NR_sched_setscheduler 160 -#define __NR_sched_getscheduler 161 -#define __NR_sched_yield 162 -#define __NR_sched_get_priority_max 163 -#define __NR_sched_get_priority_min 164 -#define __NR_sched_rr_get_interval 165 -#define __NR_nanosleep 166 -#define __NR_mremap 167 -#define __NR_accept 168 -#define __NR_bind 169 -#define __NR_connect 170 -#define __NR_getpeername 171 -#define __NR_getsockname 172 -#define __NR_getsockopt 173 -#define __NR_listen 174 -#define __NR_recv 175 -#define __NR_recvfrom 176 -#define __NR_recvmsg 177 -#define __NR_send 178 -#define __NR_sendmsg 179 -#define __NR_sendto 180 -#define __NR_setsockopt 181 -#define __NR_shutdown 182 -#define __NR_socket 183 -#define __NR_socketpair 184 -#define __NR_setresuid 185 -#define __NR_getresuid 186 -#define __NR_query_module 187 -#define __NR_poll 188 -#define __NR_nfsservctl 189 -#define __NR_setresgid 190 -#define __NR_getresgid 191 -#define __NR_prctl 192 -#define __NR_rt_sigreturn 193 -#define __NR_rt_sigaction 194 -#define __NR_rt_sigprocmask 195 -#define __NR_rt_sigpending 196 -#define __NR_rt_sigtimedwait 197 -#define __NR_rt_sigqueueinfo 198 -#define __NR_rt_sigsuspend 199 -#define __NR_pread 200 -#define __NR_pwrite 201 -#define __NR_chown 202 -#define __NR_getcwd 203 -#define __NR_capget 204 -#define __NR_capset 205 -#define __NR_sigaltstack 206 -#define __NR_sendfile 207 -#define __NR_mmap2 210 -#define __NR_truncate64 211 -#define __NR_ftruncate64 212 -#define __NR_stat64 213 -#define __NR_lstat64 214 -#define __NR_fstat64 215 -#define __NR_pivot_root 216 -#define __NR_mincore 217 -#define __NR_madvise 218 -#define __NR_getdents64 219 - -/* Keep this last; should always equal the last valid call number. */ -#define __NR_Linux_syscalls 220 - -/* user-visible error numbers are in the range -1 - -125: see - * */ - -#define SYSXTENSA_RESERVED 0 /* don't use this */ -#define SYSXTENSA_ATOMIC_SET 1 /* set variable */ -#define SYSXTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ -#define SYSXTENSA_ATOMIC_ADD 3 /* add to memory */ -#define SYSXTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ - -#define SYSXTENSA_COUNT 5 /* count of syscall0 functions*/ +#ifndef __SYSCALL +# define __SYSCALL(nr,func,nargs) +#endif + +#define __NR_spill 0 +__SYSCALL( 0, sys_ni_syscall, 0) +#define __NR_xtensa 1 +__SYSCALL( 1, sys_ni_syscall, 0) +#define __NR_available4 2 +__SYSCALL( 2, sys_ni_syscall, 0) +#define __NR_available5 3 +__SYSCALL( 3, sys_ni_syscall, 0) +#define __NR_available6 4 +__SYSCALL( 4, sys_ni_syscall, 0) +#define __NR_available7 5 +__SYSCALL( 5, sys_ni_syscall, 0) +#define __NR_available8 6 +__SYSCALL( 6, sys_ni_syscall, 0) +#define __NR_available9 7 +__SYSCALL( 7, sys_ni_syscall, 0) + +/* File Operations */ + +#define __NR_open 8 +__SYSCALL( 8, sys_open, 3) +#define __NR_close 9 +__SYSCALL( 9, sys_close, 1) +#define __NR_dup 10 +__SYSCALL( 10, sys_dup, 1) +#define __NR_dup2 11 +__SYSCALL( 11, sys_dup2, 2) +#define __NR_read 12 +__SYSCALL( 12, sys_read, 3) +#define __NR_write 13 +__SYSCALL( 13, sys_write, 3) +#define __NR_select 14 +__SYSCALL( 14, sys_select, 5) +#define __NR_lseek 15 +__SYSCALL( 15, sys_lseek, 3) +#define __NR_poll 16 +__SYSCALL( 16, sys_poll, 3) +#define __NR__llseek 17 +__SYSCALL( 17, sys_llseek, 5) +#define __NR_epoll_wait 18 +__SYSCALL( 18, sys_epoll_wait, 4) +#define __NR_epoll_ctl 19 +__SYSCALL( 19, sys_epoll_ctl, 4) +#define __NR_epoll_create 20 +__SYSCALL( 20, sys_epoll_create, 1) +#define __NR_creat 21 +__SYSCALL( 21, sys_creat, 2) +#define __NR_truncate 22 +__SYSCALL( 22, sys_truncate, 2) +#define __NR_ftruncate 23 +__SYSCALL( 23, sys_ftruncate, 2) +#define __NR_readv 24 +__SYSCALL( 24, sys_readv, 3) +#define __NR_writev 25 +__SYSCALL( 25, sys_writev, 3) +#define __NR_fsync 26 +__SYSCALL( 26, sys_fsync, 1) +#define __NR_fdatasync 27 +__SYSCALL( 27, sys_fdatasync, 1) +#define __NR_truncate64 28 +__SYSCALL( 28, sys_truncate64, 2) +#define __NR_ftruncate64 29 +__SYSCALL( 29, sys_ftruncate64, 2) +#define __NR_pread64 30 +__SYSCALL( 30, sys_pread64, 6) +#define __NR_pwrite64 31 +__SYSCALL( 31, sys_pwrite64, 6) + +#define __NR_link 32 +__SYSCALL( 32, sys_link, 2) +#define __NR_rename 33 +__SYSCALL( 33, sys_rename, 2) +#define __NR_symlink 34 +__SYSCALL( 34, sys_symlink, 2) +#define __NR_readlink 35 +__SYSCALL( 35, sys_readlink, 3) +#define __NR_mknod 36 +__SYSCALL( 36, sys_mknod, 3) +#define __NR_pipe 37 +__SYSCALL( 37, xtensa_pipe, 1) +#define __NR_unlink 38 +__SYSCALL( 38, sys_unlink, 1) +#define __NR_rmdir 39 +__SYSCALL( 39, sys_rmdir, 1) + +#define __NR_mkdir 40 +__SYSCALL( 40, sys_mkdir, 2) +#define __NR_chdir 41 +__SYSCALL( 41, sys_chdir, 1) +#define __NR_fchdir 42 +__SYSCALL( 42, sys_fchdir, 1) +#define __NR_getcwd 43 +__SYSCALL( 43, sys_getcwd, 2) + +#define __NR_chmod 44 +__SYSCALL( 44, sys_chmod, 2) +#define __NR_chown 45 +__SYSCALL( 45, sys_chown, 3) +#define __NR_stat 46 +__SYSCALL( 46, sys_newstat, 2) +#define __NR_stat64 47 +__SYSCALL( 47, sys_stat64, 2) + +#define __NR_lchown 48 +__SYSCALL( 48, sys_lchown, 3) +#define __NR_lstat 49 +__SYSCALL( 49, sys_newlstat, 2) +#define __NR_lstat64 50 +__SYSCALL( 50, sys_lstat64, 2) +#define __NR_available51 51 +__SYSCALL( 51, sys_ni_syscall, 0) + +#define __NR_fchmod 52 +__SYSCALL( 52, sys_fchmod, 2) +#define __NR_fchown 53 +__SYSCALL( 53, sys_fchown, 3) +#define __NR_fstat 54 +__SYSCALL( 54, sys_newfstat, 2) +#define __NR_fstat64 55 +__SYSCALL( 55, sys_fstat64, 2) + +#define __NR_flock 56 +__SYSCALL( 56, sys_flock, 2) +#define __NR_access 57 +__SYSCALL( 57, sys_access, 2) +#define __NR_umask 58 +__SYSCALL( 58, sys_umask, 1) +#define __NR_getdents 59 +__SYSCALL( 59, sys_getdents, 3) +#define __NR_getdents64 60 +__SYSCALL( 60, sys_getdents64, 3) +#define __NR_fcntl64 61 +__SYSCALL( 61, sys_fcntl64, 3) +#define __NR_available62 62 +__SYSCALL( 62, sys_ni_syscall, 0) +#define __NR_fadvise64_64 63 +__SYSCALL( 63, sys_fadvise64_64, 6) +#define __NR_utime 64 /* glibc 2.3.3 ?? */ +__SYSCALL( 64, sys_utime, 2) +#define __NR_utimes 65 +__SYSCALL( 65, sys_utimes, 2) +#define __NR_ioctl 66 +__SYSCALL( 66, sys_ioctl, 3) +#define __NR_fcntl 67 +__SYSCALL( 67, sys_fcntl, 3) + +#define __NR_setxattr 68 +__SYSCALL( 68, sys_setxattr, 5) +#define __NR_getxattr 69 +__SYSCALL( 69, sys_getxattr, 4) +#define __NR_listxattr 70 +__SYSCALL( 70, sys_listxattr, 3) +#define __NR_removexattr 71 +__SYSCALL( 71, sys_removexattr, 2) +#define __NR_lsetxattr 72 +__SYSCALL( 72, sys_lsetxattr, 5) +#define __NR_lgetxattr 73 +__SYSCALL( 73, sys_lgetxattr, 4) +#define __NR_llistxattr 74 +__SYSCALL( 74, sys_llistxattr, 3) +#define __NR_lremovexattr 75 +__SYSCALL( 75, sys_lremovexattr, 2) +#define __NR_fsetxattr 76 +__SYSCALL( 76, sys_fsetxattr, 5) +#define __NR_fgetxattr 77 +__SYSCALL( 77, sys_fgetxattr, 4) +#define __NR_flistxattr 78 +__SYSCALL( 78, sys_flistxattr, 3) +#define __NR_fremovexattr 79 +__SYSCALL( 79, sys_fremovexattr, 2) + +/* File Map / Shared Memory Operations */ + +#define __NR_mmap2 80 +__SYSCALL( 80, xtensa_mmap2, 6) +#define __NR_munmap 81 +__SYSCALL( 81, sys_munmap, 2) +#define __NR_mprotect 82 +__SYSCALL( 82, sys_mprotect, 3) +#define __NR_brk 83 +__SYSCALL( 83, sys_brk, 1) +#define __NR_mlock 84 +__SYSCALL( 84, sys_mlock, 2) +#define __NR_munlock 85 +__SYSCALL( 85, sys_munlock, 2) +#define __NR_mlockall 86 +__SYSCALL( 86, sys_mlockall, 1) +#define __NR_munlockall 87 +__SYSCALL( 87, sys_munlockall, 0) +#define __NR_mremap 88 +__SYSCALL( 88, sys_mremap, 4) +#define __NR_msync 89 +__SYSCALL( 89, sys_msync, 3) +#define __NR_mincore 90 +__SYSCALL( 90, sys_mincore, 3) +#define __NR_madvise 91 +__SYSCALL( 91, sys_madvise, 3) +#define __NR_shmget 92 +__SYSCALL( 92, sys_shmget, 4) +#define __NR_shmat 93 +__SYSCALL( 93, xtensa_shmat, 4) +#define __NR_shmctl 94 +__SYSCALL( 94, sys_shmctl, 4) +#define __NR_shmdt 95 +__SYSCALL( 95, sys_shmdt, 4) + +/* Socket Operations */ + +#define __NR_socket 96 +__SYSCALL( 96, sys_socket, 3) +#define __NR_setsockopt 97 +__SYSCALL( 97, sys_setsockopt, 5) +#define __NR_getsockopt 98 +__SYSCALL( 98, sys_getsockopt, 5) +#define __NR_shutdown 99 +__SYSCALL( 99, sys_shutdown, 2) + +#define __NR_bind 100 +__SYSCALL(100, sys_bind, 3) +#define __NR_connect 101 +__SYSCALL(101, sys_connect, 3) +#define __NR_listen 102 +__SYSCALL(102, sys_listen, 2) +#define __NR_accept 103 +__SYSCALL(103, sys_accept, 3) + +#define __NR_getsockname 104 +__SYSCALL(104, sys_getsockname, 3) +#define __NR_getpeername 105 +__SYSCALL(105, sys_getpeername, 3) +#define __NR_sendmsg 106 +__SYSCALL(106, sys_sendmsg, 3) +#define __NR_recvmsg 107 +__SYSCALL(107, sys_recvmsg, 3) +#define __NR_send 108 +__SYSCALL(108, sys_send, 4) +#define __NR_recv 109 +__SYSCALL(109, sys_recv, 4) +#define __NR_sendto 110 +__SYSCALL(110, sys_sendto, 6) +#define __NR_recvfrom 111 +__SYSCALL(111, sys_recvfrom, 6) + +#define __NR_socketpair 112 +__SYSCALL(112, sys_socketpair, 4) +#define __NR_sendfile 113 +__SYSCALL(113, sys_sendfile, 4) +#define __NR_sendfile64 114 +__SYSCALL(114, sys_sendfile64, 4) +#define __NR_available115 115 +__SYSCALL(115, sys_ni_syscall, 0) + +/* Process Operations */ + +#define __NR_clone 116 +__SYSCALL(116, xtensa_clone, 5) +#define __NR_execve 117 +__SYSCALL(117, xtensa_execve, 3) +#define __NR_exit 118 +__SYSCALL(118, sys_exit, 1) +#define __NR_exit_group 119 +__SYSCALL(119, sys_exit_group, 1) +#define __NR_getpid 120 +__SYSCALL(120, sys_getpid, 0) +#define __NR_wait4 121 +__SYSCALL(121, sys_wait4, 4) +#define __NR_waitid 122 +__SYSCALL(122, sys_waitid, 5) +#define __NR_kill 123 +__SYSCALL(123, sys_kill, 2) +#define __NR_tkill 124 +__SYSCALL(124, sys_tkill, 2) +#define __NR_tgkill 125 +__SYSCALL(125, sys_tgkill, 3) +#define __NR_set_tid_address 126 +__SYSCALL(126, sys_set_tid_address, 1) +#define __NR_gettid 127 +__SYSCALL(127, sys_gettid, 0) +#define __NR_setsid 128 +__SYSCALL(128, sys_setsid, 0) +#define __NR_getsid 129 +__SYSCALL(129, sys_getsid, 1) +#define __NR_prctl 130 +__SYSCALL(130, sys_prctl, 5) +#define __NR_personality 131 +__SYSCALL(131, sys_personality, 1) +#define __NR_getpriority 132 +__SYSCALL(132, sys_getpriority, 2) +#define __NR_setpriority 133 +__SYSCALL(133, sys_setpriority, 3) +#define __NR_setitimer 134 +__SYSCALL(134, sys_setitimer, 3) +#define __NR_getitimer 135 +__SYSCALL(135, sys_getitimer, 2) +#define __NR_setuid 136 +__SYSCALL(136, sys_setuid, 1) +#define __NR_getuid 137 +__SYSCALL(137, sys_getuid, 0) +#define __NR_setgid 138 +__SYSCALL(138, sys_setgid, 1) +#define __NR_getgid 139 +__SYSCALL(139, sys_getgid, 0) +#define __NR_geteuid 140 +__SYSCALL(140, sys_geteuid, 0) +#define __NR_getegid 141 +__SYSCALL(141, sys_getegid, 0) +#define __NR_setreuid 142 +__SYSCALL(142, sys_setreuid, 2) +#define __NR_setregid 143 +__SYSCALL(143, sys_setregid, 2) +#define __NR_setresuid 144 +__SYSCALL(144, sys_setresuid, 3) +#define __NR_getresuid 145 +__SYSCALL(145, sys_getresuid, 3) +#define __NR_setresgid 146 +__SYSCALL(146, sys_setresgid, 3) +#define __NR_getresgid 147 +__SYSCALL(147, sys_getresgid, 3) +#define __NR_setpgid 148 +__SYSCALL(148, sys_setpgid, 2) +#define __NR_getpgid 149 +__SYSCALL(149, sys_getpgid, 1) +#define __NR_getppid 150 +__SYSCALL(150, sys_getppid, 0) +#define __NR_available151 151 +__SYSCALL(151, sys_ni_syscall, 0) + +#define __NR_reserved152 152 /* set_thread_area */ +__SYSCALL(152, sys_ni_syscall, 0) +#define __NR_reserved153 153 /* get_thread_area */ +__SYSCALL(153, sys_ni_syscall, 0) +#define __NR_times 154 +__SYSCALL(154, sys_times, 1) +#define __NR_acct 155 +__SYSCALL(155, sys_acct, 1) +#define __NR_sched_setaffinity 156 +__SYSCALL(156, sys_sched_setaffinity, 3) +#define __NR_sched_getaffinity 157 +__SYSCALL(157, sys_sched_getaffinity, 3) +#define __NR_capget 158 +__SYSCALL(158, sys_capget, 2) +#define __NR_capset 159 +__SYSCALL(159, sys_capset, 2) +#define __NR_ptrace 160 +__SYSCALL(160, sys_ptrace, 4) +#define __NR_semtimedop 161 +__SYSCALL(161, sys_semtimedop, 5) +#define __NR_semget 162 +__SYSCALL(162, sys_semget, 4) +#define __NR_semop 163 +__SYSCALL(163, sys_semop, 4) +#define __NR_semctl 164 +__SYSCALL(164, sys_semctl, 4) +#define __NR_available165 165 +__SYSCALL(165, sys_ni_syscall, 0) +#define __NR_msgget 166 +__SYSCALL(166, sys_msgget, 4) +#define __NR_msgsnd 167 +__SYSCALL(167, sys_msgsnd, 4) +#define __NR_msgrcv 168 +__SYSCALL(168, sys_msgrcv, 4) +#define __NR_msgctl 169 +__SYSCALL(169, sys_msgctl, 4) +#define __NR_available170 170 +__SYSCALL(170, sys_ni_syscall, 0) +#define __NR_available171 171 +__SYSCALL(171, sys_ni_syscall, 0) + +/* File System */ + +#define __NR_mount 172 +__SYSCALL(172, sys_mount, 5) +#define __NR_swapon 173 +__SYSCALL(173, sys_swapon, 2) +#define __NR_chroot 174 +__SYSCALL(174, sys_chroot, 1) +#define __NR_pivot_root 175 +__SYSCALL(175, sys_pivot_root, 2) +#define __NR_umount 176 +__SYSCALL(176, sys_umount, 2) +#define __NR_swapoff 177 +__SYSCALL(177, sys_swapoff, 1) +#define __NR_sync 178 +__SYSCALL(178, sys_sync, 0) +#define __NR_available179 179 +__SYSCALL(179, sys_ni_syscall, 0) +#define __NR_setfsuid 180 +__SYSCALL(180, sys_setfsuid, 1) +#define __NR_setfsgid 181 +__SYSCALL(181, sys_setfsgid, 1) +#define __NR_sysfs 182 +__SYSCALL(182, sys_sysfs, 3) +#define __NR_ustat 183 +__SYSCALL(183, sys_ustat, 2) +#define __NR_statfs 184 +__SYSCALL(184, sys_statfs, 2) +#define __NR_fstatfs 185 +__SYSCALL(185, sys_fstatfs, 2) +#define __NR_statfs64 186 +__SYSCALL(186, sys_statfs64, 3) +#define __NR_fstatfs64 187 +__SYSCALL(187, sys_fstatfs64, 3) + +/* System */ + +#define __NR_setrlimit 188 +__SYSCALL(188, sys_setrlimit, 2) +#define __NR_getrlimit 189 +__SYSCALL(189, sys_getrlimit, 2) +#define __NR_getrusage 190 +__SYSCALL(190, sys_getrusage, 2) +#define __NR_futex 191 +__SYSCALL(191, sys_futex, 5) +#define __NR_gettimeofday 192 +__SYSCALL(192, sys_gettimeofday, 2) +#define __NR_settimeofday 193 +__SYSCALL(193, sys_settimeofday, 2) +#define __NR_adjtimex 194 +__SYSCALL(194, sys_adjtimex, 1) +#define __NR_nanosleep 195 +__SYSCALL(195, sys_nanosleep, 2) +#define __NR_getgroups 196 +__SYSCALL(196, sys_getgroups, 2) +#define __NR_setgroups 197 +__SYSCALL(197, sys_setgroups, 2) +#define __NR_sethostname 198 +__SYSCALL(198, sys_sethostname, 2) +#define __NR_setdomainname 199 +__SYSCALL(199, sys_setdomainname, 2) +#define __NR_syslog 200 +__SYSCALL(200, sys_syslog, 3) +#define __NR_vhangup 201 +__SYSCALL(201, sys_vhangup, 0) +#define __NR_uselib 202 +__SYSCALL(202, sys_uselib, 1) +#define __NR_reboot 203 +__SYSCALL(203, sys_reboot, 3) +#define __NR_quotactl 204 +__SYSCALL(204, sys_quotactl, 4) +#define __NR_nfsservctl 205 +__SYSCALL(205, sys_nfsservctl, 3) +#define __NR__sysctl 206 +__SYSCALL(206, sys_sysctl, 1) +#define __NR_bdflush 207 +__SYSCALL(207, sys_bdflush, 2) +#define __NR_uname 208 +__SYSCALL(208, sys_newuname, 1) +#define __NR_sysinfo 209 +__SYSCALL(209, sys_sysinfo, 1) +#define __NR_init_module 210 +__SYSCALL(210, sys_init_module, 2) +#define __NR_delete_module 211 +__SYSCALL(211, sys_delete_module, 1) + +#define __NR_sched_setparam 212 +__SYSCALL(212, sys_sched_setparam, 2) +#define __NR_sched_getparam 213 +__SYSCALL(213, sys_sched_getparam, 2) +#define __NR_sched_setscheduler 214 +__SYSCALL(214, sys_sched_setscheduler, 3) +#define __NR_sched_getscheduler 215 +__SYSCALL(215, sys_sched_getscheduler, 1) +#define __NR_sched_get_priority_max 216 +__SYSCALL(216, sys_sched_get_priority_max, 1) +#define __NR_sched_get_priority_min 217 +__SYSCALL(217, sys_sched_get_priority_min, 1) +#define __NR_sched_rr_get_interval 218 +__SYSCALL(218, sys_sched_rr_get_interval, 2) +#define __NR_sched_yield 219 +__SYSCALL(219, sys_sched_yield, 0) +#define __NR_sigreturn 222 +__SYSCALL(222, xtensa_sigreturn, 0) + +/* Signal Handling */ + +#define __NR_restart_syscall 223 +__SYSCALL(223, sys_restart_syscall, 0) +#define __NR_sigaltstack 224 +__SYSCALL(224, xtensa_sigaltstack, 2) +#define __NR_rt_sigreturn 225 +__SYSCALL(225, xtensa_rt_sigreturn, 1) +#define __NR_rt_sigaction 226 +__SYSCALL(226, sys_rt_sigaction, 4) +#define __NR_rt_sigprocmask 227 +__SYSCALL(227, sys_rt_sigprocmask, 4) +#define __NR_rt_sigpending 228 +__SYSCALL(228, sys_rt_sigpending, 2) +#define __NR_rt_sigtimedwait 229 +__SYSCALL(229, sys_rt_sigtimedwait, 4) +#define __NR_rt_sigqueueinfo 230 +__SYSCALL(230, sys_rt_sigqueueinfo, 3) +#define __NR_rt_sigsuspend 231 +__SYSCALL(231, xtensa_rt_sigsuspend, 2) + +/* Message */ + +#define __NR_mq_open 232 +__SYSCALL(232, sys_mq_open, 4) +#define __NR_mq_unlink 233 +__SYSCALL(233, sys_mq_unlink, 1) +#define __NR_mq_timedsend 234 +__SYSCALL(234, sys_mq_timedsend, 5) +#define __NR_mq_timedreceive 235 +__SYSCALL(235, sys_mq_timedreceive, 5) +#define __NR_mq_notify 236 +__SYSCALL(236, sys_mq_notify, 2) +#define __NR_mq_getsetattr 237 +__SYSCALL(237, sys_mq_getsetattr, 3) +#define __NR_available238 238 +__SYSCALL(238, sys_ni_syscall, 0) + +/* IO */ + +#define __NR_io_setup 239 +__SYSCALL(239, sys_io_setup, 2) +#define __NR_io_destroy 240 +__SYSCALL(240, sys_io_destroy, 1) +#define __NR_io_submit 241 +__SYSCALL(241, sys_io_submit, 3) +#define __NR_io_getevents 242 +__SYSCALL(242, sys_io_getevents, 5) +#define __NR_io_cancel 243 +__SYSCALL(243, sys_io_cancel, 3) +#define __NR_clock_settime 244 +__SYSCALL(244, sys_clock_settime, 2) +#define __NR_clock_gettime 245 +__SYSCALL(245, sys_clock_gettime, 2) +#define __NR_clock_getres 246 +__SYSCALL(246, sys_clock_getres, 2) +#define __NR_clock_nanosleep 247 +__SYSCALL(247, sys_clock_nanosleep, 4) + +/* Timer */ + +#define __NR_timer_create 248 +__SYSCALL(248, sys_timer_create, 3) +#define __NR_timer_delete 249 +__SYSCALL(249, sys_timer_delete, 1) +#define __NR_timer_settime 250 +__SYSCALL(250, sys_timer_settime, 4) +#define __NR_timer_gettime 251 +__SYSCALL(251, sys_timer_gettime, 2) +#define __NR_timer_getoverrun 252 +__SYSCALL(252, sys_timer_getoverrun, 1) + +/* System */ + +#define __NR_reserved244 253 +__SYSCALL(253, sys_ni_syscall, 0) +#define __NR_lookup_dcookie 254 +__SYSCALL(254, sys_lookup_dcookie, 4) +#define __NR_available255 255 +__SYSCALL(255, sys_ni_syscall, 0) +#define __NR_add_key 256 +__SYSCALL(256, sys_add_key, 5) +#define __NR_request_key 257 +__SYSCALL(257, sys_request_key, 5) +#define __NR_keyctl 258 +__SYSCALL(258, sys_keyctl, 5) +#define __NR_available259 259 +__SYSCALL(259, sys_ni_syscall, 0) + +#define __NR_syscall_count 261 + +/* + * sysxtensa syscall handler + * + * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); + * a2 a6 a3 a4 a5 + */ + +#define SYS_XTENSA_RESERVED 0 /* don't use this */ +#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */ +#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ +#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */ +#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ + +#define SYS_XTENSA_COUNT 5 /* count */ #ifdef __KERNEL__ @@ -232,7 +611,9 @@ #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND -#endif /* __KERNEL__ */ +#endif /* __KERNEL__ */ #endif /* _XTENSA_UNISTD_H */ + -- cgit v1.2.3 From 8d94cc50aa4f1448a6483975097805eb8d6be0e0 Mon Sep 17 00:00:00 2001 From: Stephen Street Date: Sun, 10 Dec 2006 02:18:54 -0800 Subject: [PATCH] spi: stabilize PIO mode transfers on PXA2xx systems Stabilize PIO mode transfers against a range of word sizes and FIFO thresholds and fixes word size setup/override issues. 1) 16 and 32 bit DMA/PIO transfers broken due to timing differences. 2) Potential for bad transfer counts due to transfer size assumptions. 3) Setup function broken is multiple ways. 4) Per transfer bit_per_word changes break DMA setup in pump_tranfers. 5) False positive timeout are not errors. 6) Changes in pxa2xx_spi_chip not effective in calls to setup. 7) Timeout scaling wrong for PXA255 NSSP. 8) Driver leaks memory while busy during unloading. Known issues: SPI_CS_HIGH and SPI_LSB_FIRST settings in struct spi_device are not handled. Testing: This patch has been test against the "random length, random bits/word, random data (verified on loopback) and stepped baud rate by octaves (3.6MHz to 115kHz)" test. It is robust in PIO mode, using any combination of tx and rx thresholds, and also in DMA mode (which internally computes the thresholds). Much thanks to Ned Forrester for exhaustive reviews, fixes and testing. The driver is substantially better for his efforts. Signed-off-by: Stephen Street Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/arch-pxa/pxa2xx_spi.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index 915590c391c..acc7ec7a84a 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -27,16 +27,13 @@ #define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00) #define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) #define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP_TIMEOUT_SCALE (2712) #elif defined(CONFIG_PXA27x) #define CLOCK_SPEED_HZ 13000000 #define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) #define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) #define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP_TIMEOUT_SCALE (769) #endif -#define SSP_TIMEOUT(x) ((x*10000)/SSP_TIMEOUT_SCALE) #define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1))))) #define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2))))) #define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3))))) @@ -63,7 +60,7 @@ struct pxa2xx_spi_chip { u8 tx_threshold; u8 rx_threshold; u8 dma_burst_size; - u32 timeout_microsecs; + u32 timeout; u8 enable_loopback; void (*cs_control)(u32 command); }; -- cgit v1.2.3 From 5c543eff6cc658f46241f1ccb77436d65abbf445 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 10 Dec 2006 02:18:58 -0800 Subject: [PATCH] freezer.h uses task_struct fields freezer.h uses task_struct fields so it should include sched.h. CC [M] fs/jfs/jfs_txnmgr.o In file included from fs/jfs/jfs_txnmgr.c:49: include/linux/freezer.h: In function 'frozen': include/linux/freezer.h:9: error: dereferencing pointer to incomplete type include/linux/freezer.h:9: error: 'PF_FROZEN' undeclared (first use in this function) include/linux/freezer.h:9: error: (Each undeclared identifier is reported only once include/linux/freezer.h:9: error: for each function it appears in.) include/linux/freezer.h: In function 'freezing': include/linux/freezer.h:17: error: dereferencing pointer to incomplete type include/linux/freezer.h:17: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'freeze': include/linux/freezer.h:26: error: dereferencing pointer to incomplete type include/linux/freezer.h:26: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'do_not_freeze': include/linux/freezer.h:34: error: dereferencing pointer to incomplete type include/linux/freezer.h:34: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'thaw_process': include/linux/freezer.h:43: error: dereferencing pointer to incomplete type include/linux/freezer.h:43: error: 'PF_FROZEN' undeclared (first use in this function) include/linux/freezer.h:44: warning: implicit declaration of function 'wake_up_process' include/linux/freezer.h: In function 'frozen_process': include/linux/freezer.h:55: error: dereferencing pointer to incomplete type include/linux/freezer.h:55: error: dereferencing pointer to incomplete type include/linux/freezer.h:55: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h:55: error: 'PF_FROZEN' undeclared (first use in this function) fs/jfs/jfs_txnmgr.c: In function 'freezing': include/linux/freezer.h:18: warning: control reaches end of non-void function make[2]: *** [fs/jfs/jfs_txnmgr.o] Error 1 Signed-off-by: Randy Dunlap Acked-by: Dave Kleikamp Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/freezer.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 6e05e3e7ce3..39306309613 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -1,5 +1,7 @@ /* Freezer declarations */ +#include + #ifdef CONFIG_PM /* * Check if a process has been frozen -- cgit v1.2.3 From 884b4aaaa242a2db8c8252796f0118164a680ab5 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Sun, 10 Dec 2006 02:19:00 -0800 Subject: [PATCH] rtc: Add rtc_merge_alarm() Add rtc_merge_alarm(), which can be used by rtc drivers to turn a partially specified alarm expiry (i.e. most significant fields set to -1, as with the RTC_ALM_SET ioctl()) into a fully specified expiry. If the most significant specified field is earlier than the current time, the least significant unspecified field is incremented. Signed-off-by: Scott Wood Acked-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rtc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 09ff4c3e271..5e22d4510d1 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -106,6 +106,7 @@ extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year extern int rtc_valid_tm(struct rtc_time *tm); extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time); extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm); +extern void rtc_merge_alarm(struct rtc_time *now, struct rtc_time *alarm); #include #include -- cgit v1.2.3 From 1f29bcd739972f71f2fd5d5d265daf3e1208fa5e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 10 Dec 2006 02:19:10 -0800 Subject: [PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan Cc: Andi Kleen Cc: "David S. Miller" Cc: David Howells Cc: Ralf Baechle Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sysctl.h | 5 ++--- include/net/ip.h | 3 +-- include/net/sctp/sctp.h | 2 +- 3 files changed, 4 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 94316a98e0d..6d8846e7be6 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -918,8 +918,7 @@ typedef struct ctl_table ctl_table; typedef int ctl_handler (ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, - void **context); + void __user *newval, size_t newlen); typedef int proc_handler (ctl_table *ctl, int write, struct file * filp, void __user *buffer, size_t *lenp, loff_t *ppos); @@ -950,7 +949,7 @@ extern int do_sysctl (int __user *name, int nlen, extern int do_sysctl_strategy (ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, void ** context); + void __user *newval, size_t newlen); extern ctl_handler sysctl_string; extern ctl_handler sysctl_intvec; diff --git a/include/net/ip.h b/include/net/ip.h index 83cb9ac5554..053f02b5cb8 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -376,8 +376,7 @@ int ipv4_doint_and_flush(ctl_table *ctl, int write, size_t *lenp, loff_t *ppos); int ipv4_doint_and_flush_strategy(ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, - void **context); + void __user *newval, size_t newlen); #ifdef CONFIG_PROC_FS extern int ip_misc_proc_init(void); #endif diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 215461f18db..c818f87122a 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -368,7 +368,7 @@ static inline void sctp_sysctl_register(void) { return; } static inline void sctp_sysctl_unregister(void) { return; } static inline int sctp_sysctl_jiffies_ms(ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, void **context) { + void __user *newval, size_t newlen) { return -ENOSYS; } #endif -- cgit v1.2.3 From 58f64d83c37f5073a01573d27043c9c0ccc764f1 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 10 Dec 2006 02:19:11 -0800 Subject: [PATCH] Fix noise in futex.h There are some kernel-only bits in the middle of which should be removed in what we export to userspace. Signed-off-by: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/Kbuild | 2 +- include/linux/futex.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index e618b25b5ad..a1b04d8a1d0 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -61,7 +61,6 @@ header-y += fd.h header-y += fdreg.h header-y += fib_rules.h header-y += fuse.h -header-y += futex.h header-y += genetlink.h header-y += gen_stats.h header-y += gigaset_dev.h @@ -203,6 +202,7 @@ unifdef-y += fb.h unifdef-y += fcntl.h unifdef-y += filter.h unifdef-y += flat.h +unifdef-y += futex.h unifdef-y += fs.h unifdef-y += gameport.h unifdef-y += generic_serial.h diff --git a/include/linux/futex.h b/include/linux/futex.h index d097b5b72bc..3f153b4e156 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -93,6 +93,7 @@ struct robust_list_head { */ #define ROBUST_LIST_LIMIT 2048 +#ifdef __KERNEL__ long do_futex(u32 __user *uaddr, int op, u32 val, unsigned long timeout, u32 __user *uaddr2, u32 val2, u32 val3); @@ -110,6 +111,7 @@ static inline void exit_pi_state_list(struct task_struct *curr) { } #endif +#endif /* __KERNEL__ */ #define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */ #define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */ -- cgit v1.2.3 From 7c3ab7381e79dfc7db14a67c6f4f3285664e1ec2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 10 Dec 2006 02:19:19 -0800 Subject: [PATCH] io-accounting: core statistics The present per-task IO accounting isn't very useful. It simply counts the number of bytes passed into read() and write(). So if a process reads 1MB from an already-cached file, it is accused of having performed 1MB of I/O, which is wrong. (David Wright had some comments on the applicability of the present logical IO accounting: For billing purposes it is useless but for workload analysis it is very useful read_bytes/read_calls average read request size write_bytes/write_calls average write request size read_bytes/read_blocks ie logical/physical can indicate hit rate or thrashing write_bytes/write_blocks ie logical/physical guess since pdflush writes can be missed I often look for logical larger than physical to see filesystem cache problems. And the bytes/cpusec can help find applications that are dominating the cache and causing slow interactive response from page cache contention. I want to find the IO intensive applications and make sure they are doing efficient IO. Thus the acctcms(sysV) or csacms command would give the high IO commands). This patchset adds new accounting which tries to be more accurate. We account for three things: reads: attempt to count the number of bytes which this process really did cause to be fetched from the storage layer. Done at the submit_bio() level, so it is accurate for block-backed filesystems. I also attempt to wire up NFS and CIFS. writes: attempt to count the number of bytes which this process caused to be sent to the storage layer. This is done at page-dirtying time. The big inaccuracy here is truncate. If a process writes 1MB to a file and then deletes the file, it will in fact perform no writeout. But it will have been accounted as having caused 1MB of write. So... cancelled_writes: account the number of bytes which this process caused to not happen, by truncating pagecache. We _could_ just subtract this from the process's `write' accounting. But that means that some processes would be reported to have done negative amounts of write IO, which is silly. So we just report the raw number and punt this decision up to userspace. Now, we _could_ account for writes at the physical I/O level. But - This would require that we track memory-dirtying tasks at the per-page level (would require a new pointer in struct page). - It would mean that IO statistics for a process are usually only available long after that process has exitted. Which means that we probably cannot communicate this info via taskstats. This patch: Wire up the kernel-private data structures and the accessor functions to manipulate them. Cc: Jay Lan Cc: Shailabh Nagar Cc: Balbir Singh Cc: Chris Sturtivant Cc: Tony Ernst Cc: Guillaume Thouvenin Cc: David Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 2 ++ include/linux/task_io_accounting.h | 37 ++++++++++++++++++++++++++ include/linux/task_io_accounting_ops.h | 47 ++++++++++++++++++++++++++++++++++ 3 files changed, 86 insertions(+) create mode 100644 include/linux/task_io_accounting.h create mode 100644 include/linux/task_io_accounting_ops.h (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index ad9c46071ff..1208feab46e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -82,6 +82,7 @@ struct sched_param { #include #include #include +#include #include @@ -1013,6 +1014,7 @@ struct task_struct { wait_queue_t *io_wait; /* i/o counters(bytes read/written, #syscalls */ u64 rchar, wchar, syscr, syscw; + struct task_io_accounting ioac; #if defined(CONFIG_TASK_XACCT) u64 acct_rss_mem1; /* accumulated rss usage */ u64 acct_vm_mem1; /* accumulated virtual memory usage */ diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h new file mode 100644 index 00000000000..44d00e9ccee --- /dev/null +++ b/include/linux/task_io_accounting.h @@ -0,0 +1,37 @@ +/* + * task_io_accounting: a structure which is used for recording a single task's + * IO statistics. + * + * Don't include this header file directly - it is designed to be dragged in via + * sched.h. + * + * Blame akpm@osdl.org for all this. + */ + +#ifdef CONFIG_TASK_IO_ACCOUNTING +struct task_io_accounting { + /* + * The number of bytes which this task has caused to be read from + * storage. + */ + u64 read_bytes; + + /* + * The number of bytes which this task has caused, or shall cause to be + * written to disk. + */ + u64 write_bytes; + + /* + * A task can cause "negative" IO too. If this task truncates some + * dirty pagecache, some IO which another task has been accounted for + * (in its write_bytes) will not be happening. We _could_ just + * subtract that from the truncating task's write_bytes, but there is + * information loss in doing that. + */ + u64 cancelled_write_bytes; +}; +#else +struct task_io_accounting { +}; +#endif diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h new file mode 100644 index 00000000000..df2a319106b --- /dev/null +++ b/include/linux/task_io_accounting_ops.h @@ -0,0 +1,47 @@ +/* + * Task I/O accounting operations + */ +#ifndef __TASK_IO_ACCOUNTING_OPS_INCLUDED +#define __TASK_IO_ACCOUNTING_OPS_INCLUDED + +#ifdef CONFIG_TASK_IO_ACCOUNTING +static inline void task_io_account_read(size_t bytes) +{ + current->ioac.read_bytes += bytes; +} + +static inline void task_io_account_write(size_t bytes) +{ + current->ioac.write_bytes += bytes; +} + +static inline void task_io_account_cancelled_write(size_t bytes) +{ + current->ioac.cancelled_write_bytes += bytes; +} + +static inline void task_io_accounting_init(struct task_struct *tsk) +{ + memset(&tsk->ioac, 0, sizeof(tsk->ioac)); +} + +#else + +static inline void task_io_account_read(size_t bytes) +{ +} + +static inline void task_io_account_write(size_t bytes) +{ +} + +static inline void task_io_account_cancelled_write(size_t bytes) +{ +} + +static inline void task_io_accounting_init(struct task_struct *tsk) +{ +} + +#endif /* CONFIG_TASK_IO_ACCOUNTING */ +#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */ -- cgit v1.2.3 From f2f1f8a3b86ccc5e998dc70a3ba35af199fdbc58 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 10 Dec 2006 02:19:50 -0800 Subject: [PATCH] cleanup taskstats.h Fix weird whitespace mangling in taskstats.h Cc: Jay Lan Cc: Shailabh Nagar Cc: Balbir Singh Cc: Chris Sturtivant Cc: Tony Ernst Cc: Guillaume Thouvenin Cc: David Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/taskstats.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h index 45248806ae9..15c64037be1 100644 --- a/include/linux/taskstats.h +++ b/include/linux/taskstats.h @@ -115,31 +115,31 @@ struct taskstats { __u64 ac_majflt; /* Major Page Fault Count */ /* Basic Accounting Fields end */ - /* Extended accounting fields start */ + /* Extended accounting fields start */ /* Accumulated RSS usage in duration of a task, in MBytes-usecs. * The current rss usage is added to this counter every time * a tick is charged to a task's system time. So, at the end we * will have memory usage multiplied by system time. Thus an * average usage per system time unit can be calculated. */ - __u64 coremem; /* accumulated RSS usage in MB-usec */ + __u64 coremem; /* accumulated RSS usage in MB-usec */ /* Accumulated virtual memory usage in duration of a task. * Same as acct_rss_mem1 above except that we keep track of VM usage. */ - __u64 virtmem; /* accumulated VM usage in MB-usec */ + __u64 virtmem; /* accumulated VM usage in MB-usec */ /* High watermark of RSS and virtual memory usage in duration of * a task, in KBytes. */ - __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */ - __u64 hiwater_vm; /* High-water VM usage, in KB */ + __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */ + __u64 hiwater_vm; /* High-water VM usage, in KB */ /* The following four fields are I/O statistics of a task. */ - __u64 read_char; /* bytes read */ - __u64 write_char; /* bytes written */ - __u64 read_syscalls; /* read syscalls */ - __u64 write_syscalls; /* write syscalls */ - /* Extended accounting fields end */ + __u64 read_char; /* bytes read */ + __u64 write_char; /* bytes written */ + __u64 read_syscalls; /* read syscalls */ + __u64 write_syscalls; /* write syscalls */ + /* Extended accounting fields end */ }; -- cgit v1.2.3 From 4a7864ca638e0a38307962ee8ef122822a351b65 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 10 Dec 2006 02:19:53 -0800 Subject: [PATCH] io-accounting: via taskstats Deliver IO accounting via taskstats. Cc: Jay Lan Cc: Shailabh Nagar Cc: Balbir Singh Cc: Chris Sturtivant Cc: Tony Ernst Cc: Guillaume Thouvenin Cc: David Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/taskstats.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h index 15c64037be1..3fced479825 100644 --- a/include/linux/taskstats.h +++ b/include/linux/taskstats.h @@ -31,7 +31,7 @@ */ -#define TASKSTATS_VERSION 2 +#define TASKSTATS_VERSION 3 #define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN * in linux/sched.h */ @@ -140,6 +140,12 @@ struct taskstats { __u64 read_syscalls; /* read syscalls */ __u64 write_syscalls; /* write syscalls */ /* Extended accounting fields end */ + +#define TASKSTATS_HAS_IO_ACCOUNTING + /* Per-task storage I/O accounting starts */ + __u64 read_bytes; /* bytes of read I/O */ + __u64 write_bytes; /* bytes of write I/O */ + __u64 cancelled_write_bytes; /* bytes of cancelled write I/O */ }; -- cgit v1.2.3 From ac7d550499e225efb51a53d0b00667f26b93bdff Mon Sep 17 00:00:00 2001 From: "Siddha, Suresh B" Date: Sun, 10 Dec 2006 02:20:12 -0800 Subject: [PATCH] sched domain: increase the SMT busy rebalance interval With SMT, if the logical processor is busy, load balance happens for every 8msec(min)-16msec(max). There is no need to do this often, as this is just for fairness(to maintain uniform runqueue lengths) and default time slice anyhow is 100msec. Appended patch increases this interval to 64msec(min)-128msec(max) when the logical processor is busy. Signed-off-by: Suresh Siddha Cc: Nick Piggin Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/topology.h b/include/linux/topology.h index da508d1998e..b93bb6cc6cc 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -93,7 +93,7 @@ .groups = NULL, \ .min_interval = 1, \ .max_interval = 2, \ - .busy_factor = 8, \ + .busy_factor = 64, \ .imbalance_pct = 110, \ .cache_nice_tries = 0, \ .per_cpu_gain = 25, \ -- cgit v1.2.3 From c9819f4593e8d052b41a89f47140f5c5e7e30582 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sun, 10 Dec 2006 02:20:25 -0800 Subject: [PATCH] sched: use softirq for load balancing Call rebalance_tick (renamed to run_rebalance_domains) from a newly introduced softirq. We calculate the earliest time for each layer of sched domains to be rescanned (this is the rescan time for idle) and use the earliest of those to schedule the softirq via a new field "next_balance" added to struct rq. Signed-off-by: Christoph Lameter Cc: Peter Williams Cc: Nick Piggin Cc: Christoph Lameter Cc: "Siddha, Suresh B" Cc: "Chen, Kenneth W" Acked-by: Ingo Molnar Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/interrupt.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index de7593f4e89..e36e86c869f 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -231,7 +231,8 @@ enum NET_TX_SOFTIRQ, NET_RX_SOFTIRQ, BLOCK_SOFTIRQ, - TASKLET_SOFTIRQ + TASKLET_SOFTIRQ, + SCHED_SOFTIRQ, }; /* softirq mask and active fields moved to irq_cpustat_t in -- cgit v1.2.3 From 08c183f31bdbb709f177f6d3110d5f288ea33933 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sun, 10 Dec 2006 02:20:29 -0800 Subject: [PATCH] sched: add option to serialize load balancing Large sched domains can be very expensive to scan. Add an option SD_SERIALIZE to the sched domain flags. If that flag is set then we make sure that no other such domain is being balanced. [akpm@osdl.org: build fix] Signed-off-by: Christoph Lameter Cc: Peter Williams Cc: Nick Piggin Cc: Christoph Lameter Cc: "Siddha, Suresh B" Cc: "Chen, Kenneth W" Acked-by: Ingo Molnar Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/topology.h | 1 + include/asm-ia64/topology.h | 1 + include/asm-powerpc/topology.h | 1 + include/asm-x86_64/topology.h | 1 + include/linux/sched.h | 1 + include/linux/topology.h | 3 ++- 6 files changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-i386/topology.h b/include/asm-i386/topology.h index 978d0959613..ac58580ad66 100644 --- a/include/asm-i386/topology.h +++ b/include/asm-i386/topology.h @@ -89,6 +89,7 @@ static inline int node_to_first_cpu(int node) .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_FORK \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h index a6e38565ab4..22ed6749557 100644 --- a/include/asm-ia64/topology.h +++ b/include/asm-ia64/topology.h @@ -101,6 +101,7 @@ void build_cpu_to_node_map(void); .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_FORK \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 64, \ diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 50c014007de..6610495f5f1 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -66,6 +66,7 @@ static inline int pcibus_to_node(struct pci_bus *bus) | SD_BALANCE_EXEC \ | SD_BALANCE_NEWIDLE \ | SD_WAKE_IDLE \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h index 5c8f49280db..2facec5914d 100644 --- a/include/asm-x86_64/topology.h +++ b/include/asm-x86_64/topology.h @@ -47,6 +47,7 @@ extern int __node_distance(int, int); .flags = SD_LOAD_BALANCE \ | SD_BALANCE_FORK \ | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/include/linux/sched.h b/include/linux/sched.h index 1208feab46e..ea92e5c8908 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -648,6 +648,7 @@ enum idle_type #define SD_SHARE_CPUPOWER 128 /* Domain members share cpu power */ #define SD_POWERSAVINGS_BALANCE 256 /* Balance for power savings */ #define SD_SHARE_PKG_RESOURCES 512 /* Domain members share cpu pkg resources */ +#define SD_SERIALIZE 1024 /* Only a single load balancing instance */ #define BALANCE_FOR_MC_POWER \ (sched_smt_power_savings ? SD_POWERSAVINGS_BALANCE : 0) diff --git a/include/linux/topology.h b/include/linux/topology.h index b93bb6cc6cc..6c5a6e6e813 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -194,7 +194,8 @@ .wake_idx = 0, /* unused */ \ .forkexec_idx = 0, /* unused */ \ .per_cpu_gain = 100, \ - .flags = SD_LOAD_BALANCE, \ + .flags = SD_LOAD_BALANCE \ + | SD_SERIALIZE, \ .last_balance = jiffies, \ .balance_interval = 64, \ .nr_balance_failed = 0, \ -- cgit v1.2.3 From 783609c6cb4eaa23f2ac5c968a44483584ec133f Mon Sep 17 00:00:00 2001 From: "Siddha, Suresh B" Date: Sun, 10 Dec 2006 02:20:33 -0800 Subject: [PATCH] sched: decrease number of load balances Currently at a particular domain, each cpu in the sched group will do a load balance at the frequency of balance_interval. More the cores and threads, more the cpus will be in each sched group at SMP and NUMA domain. And we endup spending quite a bit of time doing load balancing in those domains. Fix this by making only one cpu(first idle cpu or first cpu in the group if all the cpus are busy) in the sched group do the load balance at that particular sched domain and this load will slowly percolate down to the other cpus with in that group(when they do load balancing at lower domains). Signed-off-by: Suresh Siddha Cc: Christoph Lameter Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index ea92e5c8908..72d6927d29e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -707,6 +707,7 @@ struct sched_domain { unsigned long lb_hot_gained[MAX_IDLE_TYPES]; unsigned long lb_nobusyg[MAX_IDLE_TYPES]; unsigned long lb_nobusyq[MAX_IDLE_TYPES]; + unsigned long lb_stopbalance[MAX_IDLE_TYPES]; /* Active load balancing */ unsigned long alb_cnt; -- cgit v1.2.3 From 06066714f6016cffcb249f6ab21b7919de1bc859 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sun, 10 Dec 2006 02:20:35 -0800 Subject: [PATCH] sched: remove lb_stopbalance counter Remove scheduler stats lb_stopbalance counter. This counter can be calculated by: lb_balanced - lb_nobusyg - lb_nobusyq. There is no need to create gazillion counters while we can derive the value. Signed-off-by: Ken Chen Signed-off-by: Suresh Siddha Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index 72d6927d29e..ea92e5c8908 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -707,7 +707,6 @@ struct sched_domain { unsigned long lb_hot_gained[MAX_IDLE_TYPES]; unsigned long lb_nobusyg[MAX_IDLE_TYPES]; unsigned long lb_nobusyq[MAX_IDLE_TYPES]; - unsigned long lb_stopbalance[MAX_IDLE_TYPES]; /* Active load balancing */ unsigned long alb_cnt; -- cgit v1.2.3 From ee2f344b33b507af23610c8fdfdde38d7c10fb33 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 10 Dec 2006 02:20:39 -0800 Subject: [PATCH] ide-cd: Handle strange interrupt on the Intel ESB2 The ESB2 appears to emit spurious DMA interrupts when configured for native mode and handling ATAPI devices. Stratus were able to pin this bug down and produce a patch. This is a rework which applies the fixup only to the ESB2 (for now). We can apply it to other chips later if the same problem is found. This code has been tested and confirmed to fix the problem on the tested systems. Signed-off-by: Alan Cox (Most of the hard work done by Stratus however) Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ide.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/ide.h b/include/linux/ide.h index 9c2050293f1..64e070f62a8 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -796,6 +796,7 @@ typedef struct hwif_s { unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */ unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */ + unsigned atapi_irq_bogon : 1; /* Generates spurious DMA interrupts in PIO mode */ struct device gendev; struct completion gendev_rel_comp; /* To deal with device release() */ -- cgit v1.2.3 From 46031f9a38a9773021f1872abc713d62467ac22e Mon Sep 17 00:00:00 2001 From: "Raz Ben-Jehuda(caro)" Date: Sun, 10 Dec 2006 02:20:47 -0800 Subject: [PATCH] md: allow reads that have bypassed the cache to be retried on failure If a bypass-the-cache read fails, we simply try again through the cache. If it fails again it will trigger normal recovery precedures. update 1: From: NeilBrown 1/ chunk_aligned_read and retry_aligned_read assume that data_disks == raid_disks - 1 which is not true for raid6. So when an aligned read request bypasses the cache, we can get the wrong data. 2/ The cloned bio is being used-after-free in raid5_align_endio (to test BIO_UPTODATE). 3/ We forgot to add rdev->data_offset when submitting a bio for aligned-read 4/ clone_bio calls blk_recount_segments and then we change bi_bdev, so we need to invalidate the segment counts. 5/ We don't de-reference the rdev when the read completes. This means we need to record the rdev to so it is still available in the end_io routine. Fortunately bi_next in the original bio is unused at this point so we can stuff it in there. 6/ We leak a cloned bio if the target rdev is not usable. From: NeilBrown update 2: 1/ When aligned requests fail (read error) they need to be retried via the normal method (stripe cache). As we cannot be sure that we can process a single read in one go (we may not be able to allocate all the stripes needed) we store a bio-being-retried and a list of bioes-that-still-need-to-be-retried. When find a bio that needs to be retried, we should add it to the list, not to single-bio... 2/ We were never incrementing 'scnt' when resubmitting failed aligned requests. [akpm@osdl.org: build fix] Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/raid/raid5.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h index 03636d7918f..d8286db60b9 100644 --- a/include/linux/raid/raid5.h +++ b/include/linux/raid/raid5.h @@ -227,7 +227,10 @@ struct raid5_private_data { struct list_head handle_list; /* stripes needing handling */ struct list_head delayed_list; /* stripes that have plugged requests */ struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */ + struct bio *retry_read_aligned; /* currently retrying aligned bios */ + struct bio *retry_read_aligned_list; /* aligned bios retry list */ atomic_t preread_active_stripes; /* stripes with scheduled io */ + atomic_t active_aligned_reads; atomic_t reshape_stripes; /* stripes with pending writes for reshape */ /* unfortunately we need two cache names as we temporarily have -- cgit v1.2.3 From bbea9f69668a3d0cf9feba15a724cd02896f8675 Mon Sep 17 00:00:00 2001 From: Vadim Lobanov Date: Sun, 10 Dec 2006 02:21:12 -0800 Subject: [PATCH] fdtable: Make fdarray and fdsets equal in size Currently, each fdtable supports three dynamically-sized arrays of data: the fdarray and two fdsets. The code allows the number of fds supported by the fdarray (fdtable->max_fds) to differ from the number of fds supported by each of the fdsets (fdtable->max_fdset). In practice, it is wasteful for these two sizes to differ: whenever we hit a limit on the smaller-capacity structure, we will reallocate the entire fdtable and all the dynamic arrays within it, so any delta in the memory used by the larger-capacity structure will never be touched at all. Rather than hogging this excess, we shouldn't even allocate it in the first place, and keep the capacities of the fdarray and the fdsets equal. This patch removes fdtable->max_fdset. As an added bonus, most of the supporting code becomes simpler. Signed-off-by: Vadim Lobanov Cc: Christoph Hellwig Cc: Al Viro Cc: Dipankar Sarma Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/file.h | 6 ------ include/linux/init_task.h | 1 - 2 files changed, 7 deletions(-) (limited to 'include') diff --git a/include/linux/file.h b/include/linux/file.h index 6e77b9177f9..02be4012225 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -26,14 +26,8 @@ struct embedded_fd_set { unsigned long fds_bits[1]; }; -/* - * More than this number of fds: we use a separately allocated fd_set - */ -#define EMBEDDED_FD_SET_SIZE (BITS_PER_BYTE * sizeof(struct embedded_fd_set)) - struct fdtable { unsigned int max_fds; - int max_fdset; struct file ** fd; /* current fd array */ fd_set *close_on_exec; fd_set *open_fds; diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 7272ff9ee77..58c18daab65 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -12,7 +12,6 @@ #define INIT_FDTABLE \ { \ .max_fds = NR_OPEN_DEFAULT, \ - .max_fdset = EMBEDDED_FD_SET_SIZE, \ .fd = &init_files.fd_array[0], \ .close_on_exec = (fd_set *)&init_files.close_on_exec_init, \ .open_fds = (fd_set *)&init_files.open_fds_init, \ -- cgit v1.2.3 From 4fd45812cbe875a620c86a096a5d46c742694b7e Mon Sep 17 00:00:00 2001 From: Vadim Lobanov Date: Sun, 10 Dec 2006 02:21:17 -0800 Subject: [PATCH] fdtable: Remove the free_files field An fdtable can either be embedded inside a files_struct or standalone (after being expanded). When an fdtable is being discarded after all RCU references to it have expired, we must either free it directly, in the standalone case, or free the files_struct it is contained within, in the embedded case. Currently the free_files field controls this behavior, but we can get rid of it entirely, as all the necessary information is already recorded. We can distinguish embedded and standalone fdtables using max_fds, and if it is embedded we can divine the relevant files_struct using container_of(). Signed-off-by: Vadim Lobanov Cc: Christoph Hellwig Cc: Al Viro Cc: Dipankar Sarma Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/file.h | 3 +-- include/linux/init_task.h | 1 - 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/file.h b/include/linux/file.h index 02be4012225..319118f275b 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -32,7 +32,6 @@ struct fdtable { fd_set *close_on_exec; fd_set *open_fds; struct rcu_head rcu; - struct files_struct *free_files; struct fdtable *next; }; @@ -84,7 +83,7 @@ extern fd_set *alloc_fdset(int); extern void free_fdset(fd_set *, int); extern int expand_files(struct files_struct *, int nr); -extern void free_fdtable(struct fdtable *fdt); +extern void free_fdtable_rcu(struct rcu_head *rcu); extern void __init files_defer_init(void); static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 58c18daab65..b5315150199 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -16,7 +16,6 @@ .close_on_exec = (fd_set *)&init_files.close_on_exec_init, \ .open_fds = (fd_set *)&init_files.open_fds_init, \ .rcu = RCU_HEAD_INIT, \ - .free_files = NULL, \ .next = NULL, \ } -- cgit v1.2.3 From 5466b456ed6748e0bfe02831e570004d4c04c1d7 Mon Sep 17 00:00:00 2001 From: Vadim Lobanov Date: Sun, 10 Dec 2006 02:21:22 -0800 Subject: [PATCH] fdtable: Implement new pagesize-based fdtable allocator This patch provides an improved fdtable allocation scheme, useful for expanding fdtable file descriptor entries. The main focus is on the fdarray, as its memory usage grows 128 times faster than that of an fdset. The allocation algorithm sizes the fdarray in such a way that its memory usage increases in easy page-sized chunks. The overall algorithm expands the allowed size in powers of two, in order to amortize the cost of invoking vmalloc() for larger allocation sizes. Namely, the following sizes for the fdarray are considered, and the smallest that accommodates the requested fd count is chosen: pagesize / 4 pagesize / 2 pagesize <- memory allocator switch point pagesize * 2 pagesize * 4 ...etc... Unlike the current implementation, this allocation scheme does not require a loop to compute the optimal fdarray size, and can be done in efficient straightline code. Furthermore, since the fdarray overflows the pagesize boundary long before any of the fdsets do, it makes sense to optimize run-time by allocating both fdsets in a single swoop. Even together, they will still be, by far, smaller than the fdarray. The fdtable->open_fds is now used as the anchor for the fdset memory allocation. Signed-off-by: Vadim Lobanov Cc: Christoph Hellwig Cc: Al Viro Cc: Dipankar Sarma Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/file.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include') diff --git a/include/linux/file.h b/include/linux/file.h index 319118f275b..edca361f2ab 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -76,12 +76,6 @@ extern int get_unused_fd(void); extern void FASTCALL(put_unused_fd(unsigned int fd)); struct kmem_cache; -extern struct file ** alloc_fd_array(int); -extern void free_fd_array(struct file **, int); - -extern fd_set *alloc_fdset(int); -extern void free_fdset(fd_set *, int); - extern int expand_files(struct files_struct *, int nr); extern void free_fdtable_rcu(struct rcu_head *rcu); extern void __init files_defer_init(void); -- cgit v1.2.3 From 4c36a5dec25fb344ad76b11860da3a8b50bd1248 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 10 Dec 2006 02:21:24 -0800 Subject: [PATCH] round_jiffies infrastructure Introduce a round_jiffies() function as well as a round_jiffies_relative() function. These functions round a jiffies value to the next whole second. The primary purpose of this rounding is to cause all "we don't care exactly when" timers to happen at the same jiffy. This avoids multiple timers firing within the second for no real reason; with dynamic ticks these extra timers cause wakeups from deep sleep CPU sleep states and thus waste power. The exact wakeup moment is skewed by the cpu number, to avoid all cpus from waking up at the exact same time (and hitting the same lock/cachelines there) [akpm@osdl.org: fix variable type] Signed-off-by: Arjan van de Ven Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/timer.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/timer.h b/include/linux/timer.h index c982304dbaf..eeef6643d4c 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -98,4 +98,10 @@ extern void run_local_timers(void); struct hrtimer; extern int it_real_fn(struct hrtimer *); +unsigned long __round_jiffies(unsigned long j, int cpu); +unsigned long __round_jiffies_relative(unsigned long j, int cpu); +unsigned long round_jiffies(unsigned long j); +unsigned long round_jiffies_relative(unsigned long j); + + #endif -- cgit v1.2.3 From f5f1a24a2caa299bb7d294aee92d7dd3410d9ed7 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Sun, 10 Dec 2006 02:21:33 -0800 Subject: [PATCH] clocksource: small cleanup Mostly changing alignment. Just some general cleanup. [akpm@osdl.org: build fix] Signed-off-by: Daniel Walker Acked-by: John Stultz Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/clocksource.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index d852024ed09..1622d23a8dc 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -159,7 +159,7 @@ static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles) * Unless you're the timekeeping code, you should not be using this! */ static inline void clocksource_calculate_interval(struct clocksource *c, - unsigned long length_nsec) + unsigned long length_nsec) { u64 tmp; -- cgit v1.2.3 From 6aa8b732ca01c3d7a54e93f4d701b8aabbe60fb7 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 10 Dec 2006 02:21:36 -0800 Subject: [PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay Signed-off-by: Avi Kivity Cc: Simon Kagstrom Cc: Bernhard Rosenkraenzer Signed-off-by: Uri Lublin Cc: Ingo Molnar Cc: Roland Dreier Signed-off-by: Randy Dunlap Signed-off-by: Anthony Liguori Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kvm.h | 227 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100644 include/linux/kvm.h (limited to 'include') diff --git a/include/linux/kvm.h b/include/linux/kvm.h new file mode 100644 index 00000000000..5bb2c3c585c --- /dev/null +++ b/include/linux/kvm.h @@ -0,0 +1,227 @@ +#ifndef __LINUX_KVM_H +#define __LINUX_KVM_H + +/* + * Userspace interface for /dev/kvm - kernel based virtual machine + * + * Note: this interface is considered experimental and may change without + * notice. + */ + +#include +#include + +/* + * Architectural interrupt line count, and the size of the bitmap needed + * to hold them. + */ +#define KVM_NR_INTERRUPTS 256 +#define KVM_IRQ_BITMAP_SIZE_BYTES ((KVM_NR_INTERRUPTS + 7) / 8) +#define KVM_IRQ_BITMAP_SIZE(type) (KVM_IRQ_BITMAP_SIZE_BYTES / sizeof(type)) + + +/* for KVM_CREATE_MEMORY_REGION */ +struct kvm_memory_region { + __u32 slot; + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; /* bytes */ +}; + +/* for kvm_memory_region::flags */ +#define KVM_MEM_LOG_DIRTY_PAGES 1UL + + +#define KVM_EXIT_TYPE_FAIL_ENTRY 1 +#define KVM_EXIT_TYPE_VM_EXIT 2 + +enum kvm_exit_reason { + KVM_EXIT_UNKNOWN = 0, + KVM_EXIT_EXCEPTION = 1, + KVM_EXIT_IO = 2, + KVM_EXIT_CPUID = 3, + KVM_EXIT_DEBUG = 4, + KVM_EXIT_HLT = 5, + KVM_EXIT_MMIO = 6, +}; + +/* for KVM_RUN */ +struct kvm_run { + /* in */ + __u32 vcpu; + __u32 emulated; /* skip current instruction */ + __u32 mmio_completed; /* mmio request completed */ + + /* out */ + __u32 exit_type; + __u32 exit_reason; + __u32 instruction_length; + union { + /* KVM_EXIT_UNKNOWN */ + struct { + __u32 hardware_exit_reason; + } hw; + /* KVM_EXIT_EXCEPTION */ + struct { + __u32 exception; + __u32 error_code; + } ex; + /* KVM_EXIT_IO */ + struct { +#define KVM_EXIT_IO_IN 0 +#define KVM_EXIT_IO_OUT 1 + __u8 direction; + __u8 size; /* bytes */ + __u8 string; + __u8 string_down; + __u8 rep; + __u8 pad; + __u16 port; + __u64 count; + union { + __u64 address; + __u32 value; + }; + } io; + struct { + } debug; + /* KVM_EXIT_MMIO */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } mmio; + }; +}; + +/* for KVM_GET_REGS and KVM_SET_REGS */ +struct kvm_regs { + /* in */ + __u32 vcpu; + __u32 padding; + + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 rax, rbx, rcx, rdx; + __u64 rsi, rdi, rsp, rbp; + __u64 r8, r9, r10, r11; + __u64 r12, r13, r14, r15; + __u64 rip, rflags; +}; + +struct kvm_segment { + __u64 base; + __u32 limit; + __u16 selector; + __u8 type; + __u8 present, dpl, db, s, l, g, avl; + __u8 unusable; + __u8 padding; +}; + +struct kvm_dtable { + __u64 base; + __u16 limit; + __u16 padding[3]; +}; + +/* for KVM_GET_SREGS and KVM_SET_SREGS */ +struct kvm_sregs { + /* in */ + __u32 vcpu; + __u32 padding; + + /* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */ + struct kvm_segment cs, ds, es, fs, gs, ss; + struct kvm_segment tr, ldt; + struct kvm_dtable gdt, idt; + __u64 cr0, cr2, cr3, cr4, cr8; + __u64 efer; + __u64 apic_base; + __u64 interrupt_bitmap[KVM_IRQ_BITMAP_SIZE(__u64)]; +}; + +struct kvm_msr_entry { + __u32 index; + __u32 reserved; + __u64 data; +}; + +/* for KVM_GET_MSRS and KVM_SET_MSRS */ +struct kvm_msrs { + __u32 vcpu; + __u32 nmsrs; /* number of msrs in entries */ + + struct kvm_msr_entry entries[0]; +}; + +/* for KVM_GET_MSR_INDEX_LIST */ +struct kvm_msr_list { + __u32 nmsrs; /* number of msrs in entries */ + __u32 indices[0]; +}; + +/* for KVM_TRANSLATE */ +struct kvm_translation { + /* in */ + __u64 linear_address; + __u32 vcpu; + __u32 padding; + + /* out */ + __u64 physical_address; + __u8 valid; + __u8 writeable; + __u8 usermode; +}; + +/* for KVM_INTERRUPT */ +struct kvm_interrupt { + /* in */ + __u32 vcpu; + __u32 irq; +}; + +struct kvm_breakpoint { + __u32 enabled; + __u32 padding; + __u64 address; +}; + +/* for KVM_DEBUG_GUEST */ +struct kvm_debug_guest { + /* int */ + __u32 vcpu; + __u32 enabled; + struct kvm_breakpoint breakpoints[4]; + __u32 singlestep; +}; + +/* for KVM_GET_DIRTY_LOG */ +struct kvm_dirty_log { + __u32 slot; + __u32 padding; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding; + }; +}; + +#define KVMIO 0xAE + +#define KVM_RUN _IOWR(KVMIO, 2, struct kvm_run) +#define KVM_GET_REGS _IOWR(KVMIO, 3, struct kvm_regs) +#define KVM_SET_REGS _IOW(KVMIO, 4, struct kvm_regs) +#define KVM_GET_SREGS _IOWR(KVMIO, 5, struct kvm_sregs) +#define KVM_SET_SREGS _IOW(KVMIO, 6, struct kvm_sregs) +#define KVM_TRANSLATE _IOWR(KVMIO, 7, struct kvm_translation) +#define KVM_INTERRUPT _IOW(KVMIO, 8, struct kvm_interrupt) +#define KVM_DEBUG_GUEST _IOW(KVMIO, 9, struct kvm_debug_guest) +#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 10, struct kvm_memory_region) +#define KVM_CREATE_VCPU _IOW(KVMIO, 11, int /* vcpu_slot */) +#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 12, struct kvm_dirty_log) +#define KVM_GET_MSRS _IOWR(KVMIO, 13, struct kvm_msrs) +#define KVM_SET_MSRS _IOWR(KVMIO, 14, struct kvm_msrs) +#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 15, struct kvm_msr_list) + +#endif -- cgit v1.2.3 From 36cfb5ccfa39ddd030926d08fcf80ba553c88737 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:28 +0100 Subject: i2c: Update the list of driver IDs * A chip driver ID was assigned to the Radeon, while it is an adapter so it needs an i2c adapter ID. * The SAA7191 is a video decoder, not encoder. * The icspll driver is dead, and will never be ported to Linux 2.6. Signed-off-by: Jean Delvare --- include/linux/i2c-id.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 0a8f750cbed..36f0c5b0cbf 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -82,9 +82,8 @@ #define I2C_DRIVERID_STM41T00 52 /* real time clock */ #define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */ #define I2C_DRIVERID_ADV7170 54 /* video encoder */ -#define I2C_DRIVERID_RADEON 55 /* I2C bus on Radeon boards */ #define I2C_DRIVERID_MAX1617 56 /* temp sensor */ -#define I2C_DRIVERID_SAA7191 57 /* video encoder */ +#define I2C_DRIVERID_SAA7191 57 /* video decoder */ #define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */ #define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */ #define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */ @@ -132,7 +131,6 @@ #define I2C_DRIVERID_ADM1021 1008 #define I2C_DRIVERID_ADM9240 1009 #define I2C_DRIVERID_LTC1710 1010 -#define I2C_DRIVERID_ICSPLL 1012 #define I2C_DRIVERID_BT869 1013 #define I2C_DRIVERID_MAXILIFE 1014 #define I2C_DRIVERID_MATORB 1015 -- cgit v1.2.3 From 51fd554b6547b74c7e6d1f52885ba8532b531023 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:29 +0100 Subject: i2c: Delete the broken i2c-ite bus driver The rest of the ITE8172 support was already removed from MIPS tree. Signed-off-by: Jean Delvare Signed-off-by: Yoichi Yuasa Acked-by: Ralf Baechle --- include/linux/i2c-algo-ite.h | 72 -------------------------------------------- include/linux/i2c-id.h | 3 -- 2 files changed, 75 deletions(-) delete mode 100644 include/linux/i2c-algo-ite.h (limited to 'include') diff --git a/include/linux/i2c-algo-ite.h b/include/linux/i2c-algo-ite.h deleted file mode 100644 index 0073fe96c76..00000000000 --- a/include/linux/i2c-algo-ite.h +++ /dev/null @@ -1,72 +0,0 @@ -/* ------------------------------------------------------------------------- */ -/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 1995-97 Simon G. Vogl - 1998-99 Hans Berglund - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki and even - Frodo Looijaard */ - -/* Modifications by MontaVista Software, 2001 - Changes made to support the ITE IIC peripheral */ - - -#ifndef I2C_ALGO_ITE_H -#define I2C_ALGO_ITE_H 1 - -#include - -/* Example of a sequential read request: - struct i2c_iic_msg s_msg; - - s_msg.addr=device_address; - s_msg.len=length; - s_msg.buf=buffer; - s_msg.waddr=word_address; - ioctl(file,I2C_SREAD, &s_msg); - */ -#define I2C_SREAD 0x780 /* SREAD ioctl command */ - -struct i2c_iic_msg { - __u16 addr; /* device address */ - __u16 waddr; /* word address */ - short len; /* msg length */ - char *buf; /* pointer to msg data */ -}; - -#ifdef __KERNEL__ -struct i2c_adapter; - -struct i2c_algo_iic_data { - void *data; /* private data for lolevel routines */ - void (*setiic) (void *data, int ctl, int val); - int (*getiic) (void *data, int ctl); - int (*getown) (void *data); - int (*getclock) (void *data); - void (*waitforpin) (void); - - /* local settings */ - int udelay; - int mdelay; - int timeout; -}; - -int i2c_iic_add_bus(struct i2c_adapter *); -int i2c_iic_del_bus(struct i2c_adapter *); -#endif /* __KERNEL__ */ -#endif /* I2C_ALGO_ITE_H */ diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 36f0c5b0cbf..00da370bbcd 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -210,9 +210,6 @@ /* --- MPC8xx PowerPC adapters */ #define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */ -/* --- ITE based algorithms */ -#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */ - /* --- PowerPC on-chip adapters */ #define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ -- cgit v1.2.3 From 41561f28e76a47dc6de0a954da85d0b5c42874eb Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Sun, 10 Dec 2006 21:21:29 +0100 Subject: i2c: New Philips PNX bus driver New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP block). This I2C controller can be found on (at least) PNX010x, PNX52xx and PNX4008 Philips boards. Signed-off-by: Vitaly Wool Signed-off-by: Jean Delvare --- include/asm-arm/arch-pnx4008/i2c.h | 67 ++++++++++++++++++++++++++++++++++++++ include/linux/i2c-pnx.h | 43 ++++++++++++++++++++++++ 2 files changed, 110 insertions(+) create mode 100644 include/asm-arm/arch-pnx4008/i2c.h create mode 100644 include/linux/i2c-pnx.h (limited to 'include') diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h new file mode 100644 index 00000000000..92e8d65006f --- /dev/null +++ b/include/asm-arm/arch-pnx4008/i2c.h @@ -0,0 +1,67 @@ +/* + * PNX4008-specific tweaks for I2C IP3204 block + * + * Author: Vitaly Wool + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_ARCH_I2C_H__ +#define __ASM_ARCH_I2C_H__ + +#include +#include + +enum { + mstatus_tdi = 0x00000001, + mstatus_afi = 0x00000002, + mstatus_nai = 0x00000004, + mstatus_drmi = 0x00000008, + mstatus_active = 0x00000020, + mstatus_scl = 0x00000040, + mstatus_sda = 0x00000080, + mstatus_rff = 0x00000100, + mstatus_rfe = 0x00000200, + mstatus_tff = 0x00000400, + mstatus_tfe = 0x00000800, +}; + +enum { + mcntrl_tdie = 0x00000001, + mcntrl_afie = 0x00000002, + mcntrl_naie = 0x00000004, + mcntrl_drmie = 0x00000008, + mcntrl_daie = 0x00000020, + mcntrl_rffie = 0x00000040, + mcntrl_tffie = 0x00000080, + mcntrl_reset = 0x00000100, + mcntrl_cdbmode = 0x00000400, +}; + +enum { + rw_bit = 1 << 0, + start_bit = 1 << 8, + stop_bit = 1 << 9, +}; + +#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ +#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ +#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ +#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ +#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ +#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ +#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ +#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ +#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ +#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ +#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ +#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ +#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ + +#define HCLK_MHZ 13 +#define I2C_CHIP_NAME "PNX4008-I2C" + +#endif /* __ASM_ARCH_I2C_H___ */ diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h new file mode 100644 index 00000000000..e6e9c814da6 --- /dev/null +++ b/include/linux/i2c-pnx.h @@ -0,0 +1,43 @@ +/* + * Header file for I2C support on PNX010x/4008. + * + * Author: Dennis Kovalev + * + * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __I2C_PNX_H__ +#define __I2C_PNX_H__ + +#include + +struct i2c_pnx_mif { + int ret; /* Return value */ + int mode; /* Interface mode */ + struct completion complete; /* I/O completion */ + struct timer_list timer; /* Timeout */ + char * buf; /* Data buffer */ + int len; /* Length of data buffer */ +}; + +struct i2c_pnx_algo_data { + u32 base; + u32 ioaddr; + int irq; + struct i2c_pnx_mif mif; + int last; +}; + +struct i2c_pnx_data { + int (*suspend) (struct platform_device *pdev, pm_message_t state); + int (*resume) (struct platform_device *pdev); + u32 (*calculate_input_freq) (struct platform_device *pdev); + int (*set_clock_run) (struct platform_device *pdev); + int (*set_clock_stop) (struct platform_device *pdev); + struct i2c_adapter *adapter; +}; + +#endif /* __I2C_PNX_H__ */ -- cgit v1.2.3 From 6ea23039cb1cc7c379eb5fba0ed2c53291e9bea7 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sun, 10 Dec 2006 21:21:30 +0100 Subject: i2c: Add support for nested i2c bus locking This patch adds the 'level' field into the i2c_adapter structure, which is used to represent the 'logical' level of nesting for the purposes of lockdep. This field is then used in the i2c_transfer() function, to acquire the per-adapter bus_lock with correct nesting level. Signed-off-by: Jiri Kosina Signed-off-by: Jean Delvare --- include/linux/i2c.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 9b5d04768c2..08df4169b41 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -216,6 +216,7 @@ struct i2c_adapter { int (*client_unregister)(struct i2c_client *); /* data fields that are valid for all devices */ + u8 level; /* nesting level for lockdep */ struct mutex bus_lock; struct mutex clist_lock; -- cgit v1.2.3 From 438d6c2c015cf63bf7e9bdc2033d435433ac8455 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 10 Dec 2006 21:21:31 +0100 Subject: i2c: Whitespace cleanups Remove extraneous whitespace from various i2c headers and core files, like space-before-tab and whitespace at end of line. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- include/linux/i2c-algo-bit.h | 4 +-- include/linux/i2c-algo-pcf.h | 2 +- include/linux/i2c-id.h | 10 +++--- include/linux/i2c.h | 74 ++++++++++++++++++++++---------------------- 4 files changed, 45 insertions(+), 45 deletions(-) (limited to 'include') diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index c8f8df25c7e..a99e28a86c3 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -26,9 +26,9 @@ /* --- Defines for bit-adapters --------------------------------------- */ /* - * This struct contains the hw-dependent functions of bit-style adapters to + * This struct contains the hw-dependent functions of bit-style adapters to * manipulate the line states, and to init any hw-specific features. This is - * only used if you have more than one hw-type of adapter running. + * only used if you have more than one hw-type of adapter running. */ struct i2c_algo_bit_data { void *data; /* private data for lowlevel routines */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 9908f3fc483..7d7045cbb34 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -31,7 +31,7 @@ struct i2c_algo_pcf_data { int (*getpcf) (void *data, int ctl); int (*getown) (void *data); int (*getclock) (void *data); - void (*waitforpin) (void); + void (*waitforpin) (void); /* local settings */ int udelay; diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 00da370bbcd..5b97f1cce7a 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c-id.h - identifier values for i2c drivers and adapters */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-1999 Simon G. Vogl @@ -40,10 +40,10 @@ #define I2C_DRIVERID_SAA7120 11 /* video encoder */ #define I2C_DRIVERID_SAA7121 12 /* video encoder */ #define I2C_DRIVERID_SAA7185B 13 /* video encoder */ -#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ +#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ #define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */ #define I2C_DRIVERID_PCF8582C 16 /* eeprom */ -#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ +#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ #define I2C_DRIVERID_TEA6300 18 /* audio mixer */ #define I2C_DRIVERID_BT829 19 /* pc to tv encoder */ #define I2C_DRIVERID_TDA9850 20 /* audio mixer */ @@ -162,7 +162,7 @@ * ---- Adapter types ---------------------------------------------------- */ -/* --- Bit algorithm adapters */ +/* --- Bit algorithm adapters */ #define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ #define I2C_HW_B_SER 0x010002 /* Serial line interface */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 08df4169b41..71e50d3e492 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c.h - definitions for the i2c-bus interface */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-2000 Simon G. Vogl @@ -27,7 +27,7 @@ #define _LINUX_I2C_H #include -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include #include #include @@ -53,8 +53,8 @@ union i2c_smbus_data; /* * The master routines are the ones normally used to transmit data to devices - * on a bus (or read from them). Apart from two basic transfer functions to - * transmit one message at a time, a more complex version can be used to + * on a bus (or read from them). Apart from two basic transfer functions to + * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. */ extern int i2c_master_send(struct i2c_client *,const char* ,int); @@ -67,10 +67,10 @@ extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, - and probably just as fast. + and probably just as fast. Note that we use i2c_adapter here, because you do not need a specific smbus adapter to call this function. */ -extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, +extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -112,14 +112,14 @@ struct i2c_driver { /* Notifies the driver that a new bus has appeared. This routine * can be used by the driver to test if the bus meets its conditions - * & seek for the presence of the chip(s) it supports. If found, it + * & seek for the presence of the chip(s) it supports. If found, it * registers the client(s) that are on the bus to the i2c admin. via * i2c_attach_client. */ int (*attach_adapter)(struct i2c_adapter *); int (*detach_adapter)(struct i2c_adapter *); - /* tells the driver that a client is about to be deleted & gives it + /* tells the driver that a client is about to be deleted & gives it * the chance to remove its private data. Also, if the client struct * has been dynamically allocated by the driver in the function above, * it must be freed here. @@ -139,13 +139,13 @@ struct i2c_driver { #define I2C_NAME_SIZE 50 /* - * i2c_client identifies a single device (i.e. chip) that is connected to an + * i2c_client identifies a single device (i.e. chip) that is connected to an * i2c bus. The behaviour is defined by the routines of the driver. This * function is mainly used for lookup & other admin. functions. */ struct i2c_client { unsigned int flags; /* div., see below */ - unsigned short addr; /* chip address - NOTE: 7bit */ + unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ /* _LOWER_ 7 bits */ struct i2c_adapter *adapter; /* the adapter we sit on */ @@ -182,14 +182,14 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) */ struct i2c_algorithm { /* If an adapter algorithm can't do I2C-level access, set master_xfer - to NULL. If an adapter algorithm can do SMBus access, set + to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated using common I2C messages */ /* master_xfer should return the number of messages successfully processed, or a negative value on error */ - int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, + int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, int num); - int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, + int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -317,7 +317,7 @@ extern int i2c_check_addr (struct i2c_adapter *adapter, int addr); * It will only call found_proc if some client is connected at the * specific address (unless a 'force' matched); */ -extern int i2c_probe(struct i2c_adapter *adapter, +extern int i2c_probe(struct i2c_adapter *adapter, struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)); @@ -353,15 +353,15 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) */ struct i2c_msg { __u16 addr; /* slave address */ - __u16 flags; + __u16 flags; #define I2C_M_TEN 0x10 /* we have a ten bit chip address */ #define I2C_M_RD 0x01 #define I2C_M_NOSTART 0x4000 #define I2C_M_REV_DIR_ADDR 0x2000 #define I2C_M_IGNORE_NAK 0x1000 #define I2C_M_NO_RD_ACK 0x0800 - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ + __u16 len; /* msg length */ + __u8 *buf; /* pointer to msg data */ }; /* To determine what functionality is present */ @@ -371,16 +371,16 @@ struct i2c_msg { #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ #define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 +#define I2C_FUNC_SMBUS_QUICK 0x00010000 +#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 +#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 +#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 +#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 +#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 +#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 +#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ @@ -407,10 +407,10 @@ struct i2c_msg { I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ I2C_FUNC_SMBUS_I2C_BLOCK) -/* - * Data for SMBus Messages +/* + * Data for SMBus Messages */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ +#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ union i2c_smbus_data { __u8 byte; __u16 word; @@ -422,11 +422,11 @@ union i2c_smbus_data { #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 -/* SMBus transaction types (size parameter in the above functions) +/* SMBus transaction types (size parameter in the above functions) Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ #define I2C_SMBUS_QUICK 0 #define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 +#define I2C_SMBUS_BYTE_DATA 2 #define I2C_SMBUS_WORD_DATA 3 #define I2C_SMBUS_PROC_CALL 4 #define I2C_SMBUS_BLOCK_DATA 5 @@ -435,15 +435,15 @@ union i2c_smbus_data { /* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the + * note that additional calls are defined in the algorithm and hw + * dependent layers - these can be listed here, or see the * corresponding header files. */ /* -> bit-adapter specific ioctls */ #define I2C_RETRIES 0x0701 /* number of times a device address */ /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ + /* acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ /* this is for i2c-dev.c */ -- cgit v1.2.3 From 3269711b76ba27b78862c48398b0d313ccaa99c2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:33 +0100 Subject: i2c: Discard the i2c algo del_bus wrappers They are all only calling i2c_del_adapter, so we may as well do it directly. Signed-off-by: Jean Delvare --- include/linux/i2c-algo-bit.h | 1 - include/linux/i2c-algo-pca.h | 1 - include/linux/i2c-algo-pcf.h | 1 - include/linux/i2c-algo-sgi.h | 1 - 4 files changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index a99e28a86c3..937da70cb4c 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -44,6 +44,5 @@ struct i2c_algo_bit_data { }; int i2c_bit_add_bus(struct i2c_adapter *); -int i2c_bit_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_BIT_H */ diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index 226693e0d88..fce47c051bb 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -10,6 +10,5 @@ struct i2c_algo_pca_data { }; int i2c_pca_add_bus(struct i2c_adapter *); -int i2c_pca_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCA_H */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 7d7045cbb34..994eb86f882 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -39,6 +39,5 @@ struct i2c_algo_pcf_data { }; int i2c_pcf_add_bus(struct i2c_adapter *); -int i2c_pcf_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCF_H */ diff --git a/include/linux/i2c-algo-sgi.h b/include/linux/i2c-algo-sgi.h index 4a0113d6406..3b7715024e6 100644 --- a/include/linux/i2c-algo-sgi.h +++ b/include/linux/i2c-algo-sgi.h @@ -22,6 +22,5 @@ struct i2c_algo_sgi_data { }; int i2c_sgi_add_bus(struct i2c_adapter *); -int i2c_sgi_del_bus(struct i2c_adapter *); #endif /* I2C_ALGO_SGI_H */ -- cgit v1.2.3 From 5b1d221e6292f9fcf9f12d6c9e94ee9470ee2a24 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 9 Dec 2006 16:12:18 +0000 Subject: [MIPS] Fix build of several IDE drivers by providing pci_get_legacy_ide_irq Signed-off-by: Ralf Baechle --- include/asm-mips/pci.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index c4d68bebdca..7f0f120ca07 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -187,4 +187,10 @@ static inline void pcibios_add_platform_entries(struct pci_dev *dev) /* Do platform specific device initialization at pci_enable_device() time */ extern int pcibios_plat_dev_init(struct pci_dev *dev); +/* Chances are this interrupt is wired PC-style ... */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + #endif /* _ASM_PCI_H */ -- cgit v1.2.3 From 2d911e9a4e74ddbd059f9dabea402a119ef22e3d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 10 Dec 2006 15:02:17 +0000 Subject: [MIPS] Move die and die_if_kernel() from system.h to ptrace.h This eleminates the need to include ptrace.h into system.h and fixes a harmless namespace conflict on the PC symbol in bpck.c. Signed-off-by: Ralf Baechle --- include/asm-mips/ptrace.h | 8 ++++++++ include/asm-mips/system.h | 9 --------- 2 files changed, 8 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h index 30bf555faea..8a1f2b6f04a 100644 --- a/include/asm-mips/ptrace.h +++ b/include/asm-mips/ptrace.h @@ -82,6 +82,14 @@ struct pt_regs { extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); +extern NORET_TYPE void die(const char *, struct pt_regs *); + +static inline void die_if_kernel(const char *str, struct pt_regs *regs) +{ + if (unlikely(!user_mode(regs))) + die(str, regs); +} + #endif #endif /* _ASM_PTRACE_H */ diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index 9428057a50c..5e1289c85ed 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -19,7 +19,6 @@ #include #include #include -#include #include @@ -336,14 +335,6 @@ extern void *set_except_vector(int n, void *addr); extern unsigned long ebase; extern void per_cpu_trap_init(void); -extern NORET_TYPE void die(const char *, struct pt_regs *); - -static inline void die_if_kernel(const char *str, struct pt_regs *regs) -{ - if (unlikely(!user_mode(regs))) - die(str, regs); -} - extern int stop_a_enabled; /* -- cgit v1.2.3 From 45d8e7aaf47668550fdb6c2d3abbe42f48a76df2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 10 Dec 2006 23:15:47 -0600 Subject: [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala --- include/asm-powerpc/dcr-native.h | 37 +++++++++++++++++++++++++++++++++++-- include/asm-powerpc/dcr.h | 2 ++ include/asm-ppc/reg_booke.h | 36 ++---------------------------------- 3 files changed, 39 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h index fd4a5f5e33d..d7a1bc1551c 100644 --- a/include/asm-powerpc/dcr-native.h +++ b/include/asm-powerpc/dcr-native.h @@ -20,8 +20,7 @@ #ifndef _ASM_POWERPC_DCR_NATIVE_H #define _ASM_POWERPC_DCR_NATIVE_H #ifdef __KERNEL__ - -#include +#ifndef __ASSEMBLY__ typedef struct {} dcr_host_t; @@ -32,7 +31,41 @@ typedef struct {} dcr_host_t; #define dcr_read(host, dcr_n) mfdcr(dcr_n) #define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value) +/* Device Control Registers */ +void __mtdcr(int reg, unsigned int val); +unsigned int __mfdcr(int reg); +#define mfdcr(rn) \ + ({unsigned int rval; \ + if (__builtin_constant_p(rn)) \ + asm volatile("mfdcr %0," __stringify(rn) \ + : "=r" (rval)); \ + else \ + rval = __mfdcr(rn); \ + rval;}) + +#define mtdcr(rn, v) \ +do { \ + if (__builtin_constant_p(rn)) \ + asm volatile("mtdcr " __stringify(rn) ",%0" \ + : : "r" (v)); \ + else \ + __mtdcr(rn, v); \ +} while (0) + +/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ +#define mfdcri(base, reg) \ +({ \ + mtdcr(base ## _CFGADDR, base ## _ ## reg); \ + mfdcr(base ## _CFGDATA); \ +}) + +#define mtdcri(base, reg, data) \ +do { \ + mtdcr(base ## _CFGADDR, base ## _ ## reg); \ + mtdcr(base ## _CFGDATA, data); \ +} while (0) +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h index 473f2c7fd89..b66c5e6941f 100644 --- a/include/asm-powerpc/dcr.h +++ b/include/asm-powerpc/dcr.h @@ -20,6 +20,7 @@ #ifndef _ASM_POWERPC_DCR_H #define _ASM_POWERPC_DCR_H #ifdef __KERNEL__ +#ifdef CONFIG_PPC_DCR #ifdef CONFIG_PPC_DCR_NATIVE #include @@ -38,5 +39,6 @@ extern unsigned int dcr_resource_len(struct device_node *np, unsigned int index); #endif /* CONFIG_PPC_MERGE */ +#endif /* CONFIG_PPC_DCR */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_H */ diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h index 602fbadeaf4..a263fc1e65c 100644 --- a/include/asm-ppc/reg_booke.h +++ b/include/asm-ppc/reg_booke.h @@ -9,41 +9,9 @@ #ifndef __ASM_PPC_REG_BOOKE_H__ #define __ASM_PPC_REG_BOOKE_H__ -#ifndef __ASSEMBLY__ -/* Device Control Registers */ -void __mtdcr(int reg, unsigned int val); -unsigned int __mfdcr(int reg); -#define mfdcr(rn) \ - ({unsigned int rval; \ - if (__builtin_constant_p(rn)) \ - asm volatile("mfdcr %0," __stringify(rn) \ - : "=r" (rval)); \ - else \ - rval = __mfdcr(rn); \ - rval;}) - -#define mtdcr(rn, v) \ -do { \ - if (__builtin_constant_p(rn)) \ - asm volatile("mtdcr " __stringify(rn) ",%0" \ - : : "r" (v)); \ - else \ - __mtdcr(rn, v); \ -} while (0) - -/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ -#define mfdcri(base, reg) \ -({ \ - mtdcr(base ## _CFGADDR, base ## _ ## reg); \ - mfdcr(base ## _CFGDATA); \ -}) - -#define mtdcri(base, reg, data) \ -do { \ - mtdcr(base ## _CFGADDR, base ## _ ## reg); \ - mtdcr(base ## _CFGDATA, data); \ -} while (0) +#include +#ifndef __ASSEMBLY__ /* Performance Monitor Registers */ #define mfpmr(rn) ({unsigned int rval; \ asm volatile("mfpmr %0," __stringify(rn) \ -- cgit v1.2.3 From d10f73480b991da2aa1c000ed38eda3e4a987292 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 10 Dec 2006 23:26:16 -0600 Subject: [PPC] Fix compile failure do to introduction of PHY_POLL PHY_POLL is defined in include it in so board code will have it defined. Signed-off-by: Kumar Gala --- include/linux/fsl_devices.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 3da29e2d524..abb64c437f6 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -19,6 +19,7 @@ #define _FSL_DEVICE_H_ #include +#include /* * Some conventions on how we handle peripherals on Freescale chips -- cgit v1.2.3 From 73c9ceab40b1269d6195e556773167c078ac8311 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 8 Dec 2006 03:30:41 -0800 Subject: [POWERPC] Generic BUG for powerpc This makes powerpc use the generic BUG machinery. The biggest reports the function name, since it is redundant with kallsyms, and not needed in general. There is an overall reduction of code, since module_32/64 duplicated several functions. Unfortunately there's no way to tell gcc that BUG won't return, so the BUG macro includes a goto loop. This will generate a real jmp instruction, which is never used. [akpm@osdl.org: build fix] [paulus@samba.org: remove infinite loop in BUG_ON] Signed-off-by: Jeremy Fitzhardinge Cc: Andi Kleen Cc: Hugh Dickens Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- include/asm-powerpc/bug.h | 80 ++++++++++++++++++++++---------------------- include/asm-powerpc/module.h | 2 -- 2 files changed, 40 insertions(+), 42 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h index 978b2c7e84e..709568879f7 100644 --- a/include/asm-powerpc/bug.h +++ b/include/asm-powerpc/bug.h @@ -13,36 +13,39 @@ #ifndef __ASSEMBLY__ -struct bug_entry { - unsigned long bug_addr; - long line; - const char *file; - const char *function; -}; - -struct bug_entry *find_bug(unsigned long bugaddr); - -/* - * If this bit is set in the line number it means that the trap - * is for WARN_ON rather than BUG or BUG_ON. - */ -#define BUG_WARNING_TRAP 0x1000000 - #ifdef CONFIG_BUG +/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and + sizeof(struct bug_entry), respectively */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b, %0\n" \ + "\t.short %1, %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#else +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b\n" \ + "\t.short %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#endif + /* * BUG_ON() and WARN_ON() do their best to cooperate with compile-time * optimisations. However depending on the complexity of the condition * some compiler versions may not produce optimal results. */ -#define BUG() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%0,%1,%2\n" \ - ".previous" \ - : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \ +#define BUG() do { \ + __asm__ __volatile__( \ + "1: twi 31,0,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (0), "i" (sizeof(struct bug_entry))); \ + for(;;) ; \ } while (0) #define BUG_ON(x) do { \ @@ -51,23 +54,21 @@ struct bug_entry *find_bug(unsigned long bugaddr); BUG(); \ } else { \ __asm__ __volatile__( \ - "1: "PPC_TLNEI" %0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%1,%2,%3\n" \ - ".previous" \ - : : "r" ((long)(x)), "i" (__LINE__), \ - "i" (__FILE__), "i" (__FUNCTION__)); \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), "i" (0), \ + "i" (sizeof(struct bug_entry)), \ + "r" ((long)(x))); \ } \ } while (0) #define __WARN() do { \ __asm__ __volatile__( \ "1: twi 31,0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%0,%1,%2\n" \ - ".previous" \ - : : "i" (__LINE__ + BUG_WARNING_TRAP), \ - "i" (__FILE__), "i" (__FUNCTION__)); \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry))); \ } while (0) #define WARN_ON(x) ({ \ @@ -77,13 +78,12 @@ struct bug_entry *find_bug(unsigned long bugaddr); __WARN(); \ } else { \ __asm__ __volatile__( \ - "1: "PPC_TLNEI" %0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%1,%2,%3\n" \ - ".previous" \ - : : "r" (__ret_warn_on), \ - "i" (__LINE__ + BUG_WARNING_TRAP), \ - "i" (__FILE__), "i" (__FUNCTION__)); \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry)), \ + "r" (__ret_warn_on)); \ } \ unlikely(__ret_warn_on); \ }) diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h index 584fabfb4f0..e5f14b13ccf 100644 --- a/include/asm-powerpc/module.h +++ b/include/asm-powerpc/module.h @@ -46,8 +46,6 @@ struct mod_arch_specific { unsigned int num_bugs; }; -extern struct bug_entry *module_find_bug(unsigned long bugaddr); - /* * Select ELF headers. * Make empty section for module_frob_arch_sections to expand. -- cgit v1.2.3 From 8993780a6e44fb4e7ed34e33458506a775356c6e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 11 Dec 2006 09:28:46 -0800 Subject: Make SLES9 "get_kernel_version" work on the kernel binary again As reported by Andy Whitcroft, at least the SLES9 initrd build process depends on getting the kernel version from the kernel binary. It does that by simply trawling the binary and looking for the signature of the "linux_banner" string (the string "Linux version " to be exact. Which is really broken in itself, but whatever..) That got broken when the string was changed to allow /proc/version to change the UTS release information dynamically, and "get_kernel_version" thus returned "%s" (see commit a2ee8649ba6d71416712e798276bf7c40b64e6e5: "[PATCH] Fix linux banner utsname information"). This just restores "linux_banner" as a static string, which should fix the version finding. And /proc/version simply uses a different string. To avoid wasting even that miniscule amount of memory, the early boot string should really be marked __initdata, but that just causes the same bug in SLES9 to re-appear, since it will then find other occurrences of "Linux version " first. Cc: Andy Whitcroft Acked-by: Herbert Poetzl Cc: Andi Kleen Cc: Andrew Morton Cc: Steve Fox Acked-by: Olaf Hering Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e8bfac34d2b..b0c4a05a4b0 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -17,8 +17,6 @@ #include #include -extern const char linux_banner[]; - #define INT_MAX ((int)(~0U>>1)) #define INT_MIN (-INT_MAX - 1) #define UINT_MAX (~0U) -- cgit v1.2.3 From 8d610dd52dd1da696e199e4b4545f33a2a5de5c6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 11 Dec 2006 12:12:04 -0800 Subject: Make sure we populate the initroot filesystem late enough We should not initialize rootfs before all the core initializers have run. So do it as a separate stage just before starting the regular driver initializers. Signed-off-by: Linus Torvalds --- include/asm-generic/vmlinux.lds.h | 1 + include/linux/init.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 6e9fcebbf89..7437ccaada7 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -242,6 +242,7 @@ *(.initcall4s.init) \ *(.initcall5.init) \ *(.initcall5s.init) \ + *(.initcallrootfs.init) \ *(.initcall6.init) \ *(.initcall6s.init) \ *(.initcall7.init) \ diff --git a/include/linux/init.h b/include/linux/init.h index 5eb5d24b768..5a593a1dec1 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -111,6 +111,7 @@ extern void setup_arch(char **); #define subsys_initcall_sync(fn) __define_initcall("4s",fn,4s) #define fs_initcall(fn) __define_initcall("5",fn,5) #define fs_initcall_sync(fn) __define_initcall("5s",fn,5s) +#define rootfs_initcall(fn) __define_initcall("rootfs",fn,rootfs) #define device_initcall(fn) __define_initcall("6",fn,6) #define device_initcall_sync(fn) __define_initcall("6s",fn,6s) #define late_initcall(fn) __define_initcall("7",fn,7) -- cgit v1.2.3 From 022416967a814aa1b3a9476a842c0947a1a9d784 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 11 Dec 2006 13:16:05 +0000 Subject: [PATCH] LOG2: Make powerpc's __ilog2_u64() take a 64-bit argument Make powerpc's __ilog2_u64() take a 64-bit argument. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/asm-powerpc/bitops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h index 0288144ea02..8f757f6246e 100644 --- a/include/asm-powerpc/bitops.h +++ b/include/asm-powerpc/bitops.h @@ -209,7 +209,7 @@ int __ilog2_u32(u32 n) #ifdef __powerpc64__ static inline __attribute__((const)) -int __ilog2_u64(u32 n) +int __ilog2_u64(u64 n) { int bit; asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n)); -- cgit v1.2.3 From 1a21e49a8d60f588c1276f765198b14d5688a778 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Sun, 10 Dec 2006 00:02:12 -0200 Subject: [DCCP] ccid3: Finer-grained resolution of sending rates This patch * resolves a bug where packets smaller than 32/64 bytes resulted in sending rates of 0 * supports all sending rates from 1/64 bytes/second up to 4Gbyte/second * simplifies the present overflow problems in calculations Current sending rate X and the cached value X_recv of the receiver-estimated sending rate are both scaled by 64 (2^6) in order to * cope with low sending rates (minimally 1 byte/second) * allow upgrading to use a packets-per-second implementation of CCID 3 * avoid calculation errors due to integer arithmetic cut-off The patch implements a revised strategy from http://www.mail-archive.com/dccp@vger.kernel.org/msg01040.html The only difference with regard to that strategy is that t_ipi is already used in the calculation of the nofeedback timeout, which saves one division. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: Arnaldo Carvalho de Melo --- include/linux/tfrc.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/tfrc.h b/include/linux/tfrc.h index 31a9b25276f..8a8462b4a4d 100644 --- a/include/linux/tfrc.h +++ b/include/linux/tfrc.h @@ -37,10 +37,14 @@ struct tfrc_rx_info { * @tfrctx_p: current loss event rate (5.4) * @tfrctx_rto: estimate of RTO, equals 4*RTT (4.3) * @tfrctx_ipi: inter-packet interval (4.6) + * + * Note: X and X_recv are both maintained in units of 64 * bytes/second. This + * enables a finer resolution of sending rates and avoids problems with + * integer arithmetic; u32 is not sufficient as scaling consumes 6 bits. */ struct tfrc_tx_info { - __u32 tfrctx_x; - __u32 tfrctx_x_recv; + __u64 tfrctx_x; + __u64 tfrctx_x_recv; __u32 tfrctx_x_calc; __u32 tfrctx_rtt; __u32 tfrctx_p; -- cgit v1.2.3 From 8109b02b5397ed52a32c116163a62a34f4768b26 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sun, 10 Dec 2006 16:01:18 -0200 Subject: [DCCP]: Whitespace cleanups That accumulated over the last months hackaton, shame on me for not using git-apply whitespace helping hand, will do that from now on. Signed-off-by: Arnaldo Carvalho de Melo --- include/linux/dccp.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index ed6cc8962d8..1cb054bd93f 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -176,20 +176,20 @@ enum { }; /* DCCP features (RFC 4340 section 6.4) */ - enum { - DCCPF_RESERVED = 0, - DCCPF_CCID = 1, +enum { + DCCPF_RESERVED = 0, + DCCPF_CCID = 1, DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */ - DCCPF_SEQUENCE_WINDOW = 3, + DCCPF_SEQUENCE_WINDOW = 3, DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */ - DCCPF_ACK_RATIO = 5, - DCCPF_SEND_ACK_VECTOR = 6, - DCCPF_SEND_NDP_COUNT = 7, + DCCPF_ACK_RATIO = 5, + DCCPF_SEND_ACK_VECTOR = 6, + DCCPF_SEND_NDP_COUNT = 7, DCCPF_MIN_CSUM_COVER = 8, DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */ - /* 10-127 reserved */ - DCCPF_MIN_CCID_SPECIFIC = 128, - DCCPF_MAX_CCID_SPECIFIC = 255, + /* 10-127 reserved */ + DCCPF_MIN_CCID_SPECIFIC = 128, + DCCPF_MAX_CCID_SPECIFIC = 255, }; /* this structure is argument to DCCP_SOCKOPT_CHANGE_X */ @@ -427,7 +427,7 @@ struct dccp_service_list { }; #define DCCP_SERVICE_INVALID_VALUE htonl((__u32)-1) -#define DCCP_SERVICE_CODE_IS_ABSENT 0 +#define DCCP_SERVICE_CODE_IS_ABSENT 0 static inline int dccp_list_has_service(const struct dccp_service_list *sl, const __be32 service) @@ -436,7 +436,7 @@ static inline int dccp_list_has_service(const struct dccp_service_list *sl, u32 i = sl->dccpsl_nr; while (i--) if (sl->dccpsl_list[i] == service) - return 1; + return 1; } return 0; } @@ -511,7 +511,7 @@ struct dccp_sock { __u8 dccps_hc_tx_insert_options:1; struct timer_list dccps_xmit_timer; }; - + static inline struct dccp_sock *dccp_sk(const struct sock *sk) { return (struct dccp_sock *)sk; -- cgit v1.2.3 From f654c854d1d4e0aca5389ace541647237eb7f753 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 10 Dec 2006 13:46:45 -0800 Subject: [HAMRADIO]: Fix baycom_epp.c compile failure. Fix foobar in 15b1c0e822f578306332d4f4c449250db5c5dceb and e8cc49bb0fdb9e18a99e6780073d1400ba2b0d1f patch series. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/ax25.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/ax25.h b/include/net/ax25.h index e1d116f1192..14b72d868f0 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -285,6 +285,8 @@ extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *); extern const ax25_address ax25_bcast; extern const ax25_address ax25_defaddr; extern const ax25_address null_ax25_address; +extern char *ax2asc(char *buf, const ax25_address *); +extern void asc2ax(ax25_address *addr, const char *callsign); extern int ax25cmp(const ax25_address *, const ax25_address *); extern int ax25digicmp(const ax25_digi *, const ax25_digi *); extern const unsigned char *ax25_addr_parse(const unsigned char *, int, -- cgit v1.2.3 From b9b382dabba1e4a106093557933ec4411ebcbe0f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 Dec 2006 12:43:06 +0900 Subject: sh: Reworked swap cache entry encoding for SH-X2 MMU. In the 64-bit PTE case there's no point in restricting the encoding to the low bits of the PTE, we can instead bump all of this up to the high 32 bits and extend PTE_FILE_MAX_BITS to 32, adopting the same convention used by x86 PAE. There's a minor discrepency between the number of bits used for the swap type encoding between 32 and 64-bit PTEs, but this is unlikely to cause any problem given the extended offset. Signed-off-by: Paul Mundt --- include/asm-sh/pgtable.h | 47 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 41 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index c84901dbd8e..af62bd33a02 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -508,16 +508,50 @@ struct vm_area_struct; extern void update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte); -/* Encode and de-code a swap entry */ /* + * Encode and de-code a swap entry + * + * Constraints: + * _PAGE_FILE at bit 0 + * _PAGE_PRESENT at bit 8 + * _PAGE_PROTNONE at bit 9 + * + * For the normal case, we encode the swap type into bits 0:7 and the + * swap offset into bits 10:30. For the 64-bit PTE case, we keep the + * preserved bits in the low 32-bits and use the upper 32 as the swap + * offset (along with a 5-bit type), following the same approach as x86 + * PAE. This keeps the logic quite simple, and allows for a full 32 + * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with + * in the pte_low case. + * + * As is evident by the Alpha code, if we ever get a 64-bit unsigned + * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes + * much cleaner.. + * * NOTE: We should set ZEROs at the position of _PAGE_PRESENT * and _PAGE_PROTNONE bits */ -#define __swp_type(x) ((x).val & 0xff) -#define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 10) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) +#ifdef CONFIG_X2TLB +#define __swp_type(x) ((x).val & 0x1f) +#define __swp_offset(x) ((x).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define pte_to_pgoff(pte) ((pte).pte_high) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) + +#define PTE_FILE_MAX_BITS 32 +#else +#define __swp_type(x) ((x).val & 0xff) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10)}) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) /* * Encode and decode a nonlinear file mapping entry @@ -525,6 +559,7 @@ extern void update_mmu_cache(struct vm_area_struct * vma, #define PTE_FILE_MAX_BITS 29 #define pte_to_pgoff(pte) (pte_val(pte) >> 1) #define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) +#endif typedef pte_t *pte_addr_t; -- cgit v1.2.3 From b482ad5daef786962279ae03090970b0ee8b8d1c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 Dec 2006 12:43:52 +0900 Subject: sh: Shut up csum_ipv6_magic() warnings. Signed-off-by: Paul Mundt --- include/asm-sh/checksum.h | 69 +++++++++++++++++++++++------------------------ 1 file changed, 34 insertions(+), 35 deletions(-) (limited to 'include') diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h index d44344c88e7..4bc8357e889 100644 --- a/include/asm-sh/checksum.h +++ b/include/asm-sh/checksum.h @@ -34,25 +34,26 @@ asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); */ asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, - int len, __wsum sum, int *src_err_ptr, int *dst_err_ptr); + int len, __wsum sum, + int *src_err_ptr, int *dst_err_ptr); /* * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the * access_ok(). */ -static __inline__ +static inline __wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) + int len, __wsum sum) { - return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL); + return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); } -static __inline__ +static inline __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr) + int len, __wsum sum, int *err_ptr) { return csum_partial_copy_generic((__force const void *)src, dst, len, sum, err_ptr, NULL); @@ -62,7 +63,7 @@ __wsum csum_partial_copy_from_user(const void __user *src, void *dst, * Fold a partial checksum */ -static __inline__ __sum16 csum_fold(__wsum sum) +static inline __sum16 csum_fold(__wsum sum) { unsigned int __dummy; __asm__("swap.w %0, %1\n\t" @@ -85,7 +86,7 @@ static __inline__ __sum16 csum_fold(__wsum sum) * i386 version by Jorge Cwik , adapted * for linux by * Arnt Gulbrandsen. */ -static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) { unsigned int sum, __dummy0, __dummy1; @@ -113,10 +114,10 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) return csum_fold(sum); } -static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) { #ifdef __LITTLE_ENDIAN__ unsigned long len_proto = (proto + len) << 8; @@ -132,6 +133,7 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, : "=r" (sum), "=r" (len_proto) : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) : "t"); + return sum; } @@ -139,30 +141,28 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, * computes the checksum of the TCP/UDP pseudo-header * returns a 16-bit checksum, already complemented */ -static __inline__ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) { - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); } /* * this routine is used for miscellaneous IP-like checksums, mainly * in icmp.c */ - -static __inline__ __sum16 ip_compute_csum(const void *buff, int len) +static inline __sum16 ip_compute_csum(const void *buff, int len) { - return csum_fold (csum_partial(buff, len, 0)); + return csum_fold(csum_partial(buff, len, 0)); } #define _HAVE_ARCH_IPV6_CSUM -#ifdef CONFIG_IPV6 -static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) { unsigned int __dummy; __asm__("clrt\n\t" @@ -187,22 +187,21 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, "movt %1\n\t" "add %1, %0\n" : "=r" (sum), "=&r" (__dummy) - : "r" (saddr), "r" (daddr), + : "r" (saddr), "r" (daddr), "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) : "t"); return csum_fold(sum); } -#endif -/* +/* * Copy and checksum to user */ #define HAVE_CSUM_COPY_USER -static __inline__ __wsum csum_and_copy_to_user (const void *src, - void __user *dst, - int len, __wsum sum, - int *err_ptr) +static inline __wsum csum_and_copy_to_user(const void *src, + void __user *dst, + int len, __wsum sum, + int *err_ptr) { if (access_ok(VERIFY_WRITE, dst, len)) return csum_partial_copy_generic((__force const void *)src, -- cgit v1.2.3 From fce3a24e7087ba1f56eea5ec14fec592e677e672 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 Dec 2006 13:20:58 +0900 Subject: sh: push-switch fixups for work_struct API damage. INIT_WORK() dropped the data arg, so now we have to stash an extra pointer and backpedal instead. Signed-off-by: Paul Mundt --- include/asm-sh/push-switch.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-sh/push-switch.h b/include/asm-sh/push-switch.h index dfc6bad567f..4903f9e52dd 100644 --- a/include/asm-sh/push-switch.h +++ b/include/asm-sh/push-switch.h @@ -4,6 +4,7 @@ #include #include #include +#include struct push_switch { /* switch state */ @@ -12,6 +13,8 @@ struct push_switch { struct timer_list debounce; /* workqueue */ struct work_struct work; + /* platform device, for workqueue handler */ + struct platform_device *pdev; }; struct push_switch_platform_info { -- cgit v1.2.3 From b6250e37292b9679b82a3edc28f330a32eed9ae4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 Dec 2006 17:27:18 +0900 Subject: sh: landisk board build fixes. Get the landisk board building again.. Signed-off-by: Paul Mundt --- include/asm-sh/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index af62bd33a02..036ca284386 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -548,7 +548,7 @@ extern void update_mmu_cache(struct vm_area_struct * vma, #else #define __swp_type(x) ((x).val & 0xff) #define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10)}) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) -- cgit v1.2.3 From ec723fbe7e19f5a66cea183bca7ca20675631a7a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 Dec 2006 20:33:38 +0900 Subject: sh: Split out atomic ops logically. We have a few different ways to do the atomic operations, so split them out in to different headers rather than bloating atomic.h. Kernelspace gUSA will take this up to a third implementation. Signed-off-by: Paul Mundt --- include/asm-sh/atomic-irq.h | 71 ++++++++++++++++++++ include/asm-sh/atomic-llsc.h | 107 ++++++++++++++++++++++++++++++ include/asm-sh/atomic.h | 153 +------------------------------------------ 3 files changed, 180 insertions(+), 151 deletions(-) create mode 100644 include/asm-sh/atomic-irq.h create mode 100644 include/asm-sh/atomic-llsc.h (limited to 'include') diff --git a/include/asm-sh/atomic-irq.h b/include/asm-sh/atomic-irq.h new file mode 100644 index 00000000000..74f7943cff6 --- /dev/null +++ b/include/asm-sh/atomic-irq.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_ATOMIC_IRQ_H +#define __ASM_SH_ATOMIC_IRQ_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v += i; + local_irq_restore(flags); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v -= i; + local_irq_restore(flags); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp += i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp -= i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v &= ~mask; + local_irq_restore(flags); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v |= mask; + local_irq_restore(flags); +} + +#endif /* __ASM_SH_ATOMIC_IRQ_H */ diff --git a/include/asm-sh/atomic-llsc.h b/include/asm-sh/atomic-llsc.h new file mode 100644 index 00000000000..4b00b78e3f4 --- /dev/null +++ b/include/asm-sh/atomic-llsc.h @@ -0,0 +1,107 @@ +#ifndef __ASM_SH_ATOMIC_LLSC_H +#define __ASM_SH_ATOMIC_LLSC_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +/* + * SH-4A note: + * + * We basically get atomic_xxx_return() for free compared with + * atomic_xxx(). movli.l/movco.l require r0 due to the instruction + * encoding, so the retval is automatically set without having to + * do any special work. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add_return \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub_return \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_clear_mask \n" +" and %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (~mask), "r" (&v->counter) + : "t"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_set_mask \n" +" or %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (mask), "r" (&v->counter) + : "t"); +} + +#endif /* __ASM_SH_ATOMIC_LLSC_H */ diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h index 28305c3cbdd..e12570b9339 100644 --- a/include/asm-sh/atomic.h +++ b/include/asm-sh/atomic.h @@ -17,119 +17,14 @@ typedef struct { volatile int counter; } atomic_t; #include #include -/* - * To get proper branch prediction for the main line, we must branch - * forward to code at the end of this object's .text section, then - * branch back to restart the operation. - */ -static inline void atomic_add(int i, atomic_t *v) -{ #ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); +#include #else - unsigned long flags; - - local_irq_save(flags); - *(long *)v += i; - local_irq_restore(flags); -#endif -} - -static inline void atomic_sub(int i, atomic_t *v) -{ -#ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - *(long *)v -= i; - local_irq_restore(flags); +#include #endif -} - -/* - * SH-4A note: - * - * We basically get atomic_xxx_return() for free compared with - * atomic_xxx(). movli.l/movco.l require r0 due to the instruction - * encoding, so the retval is automatically set without having to - * do any special work. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long temp; - -#ifdef CONFIG_CPU_SH4A - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add_return \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); -#endif - - return temp; -} #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long temp; - -#ifdef CONFIG_CPU_SH4A - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub_return \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); -#endif - - return temp; -} - #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v)) @@ -180,50 +75,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ -#ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_clear_mask \n" -" and %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (~mask), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - *(long *)v &= ~mask; - local_irq_restore(flags); -#endif -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ -#ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_set_mask \n" -" or %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (mask), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - *(long *)v |= mask; - local_irq_restore(flags); -#endif -} - /* Atomic operations are already serializing on SH */ #define smp_mb__before_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier() -- cgit v1.2.3 From dc34d312c7b25d5d0f54c16d143a9526936e5d38 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 Dec 2006 17:41:43 +0900 Subject: sh: BUG() handling through trapa vector. Previously we haven't been doing anything with verbose BUG() reporting, and we've been relying on the oops path for handling BUG()'s, which is rather sub-optimal. This switches BUG handling to use a fixed trapa vector (#0x3e) where we construct a small bug frame post trapa instruction to get the context right. This also makes it trivial to wire up a DIE_BUG for the atomic die chain, which we couldn't really do before. Signed-off-by: Paul Mundt --- include/asm-sh/bug.h | 53 +++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h index 1b4fc52a59e..2f89dd06d0c 100644 --- a/include/asm-sh/bug.h +++ b/include/asm-sh/bug.h @@ -1,19 +1,54 @@ #ifndef __ASM_SH_BUG_H #define __ASM_SH_BUG_H - #ifdef CONFIG_BUG -/* - * Tell the user there is some problem. - */ -#define BUG() do { \ - printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ - *(volatile int *)0 = 0; \ + +struct bug_frame { + unsigned short opcode; + unsigned short line; + const char *file; + const char *func; +}; + +struct pt_regs; + +extern void handle_BUG(struct pt_regs *); + +#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ + +#ifdef CONFIG_DEBUG_BUGVERBOSE + +#define BUG() \ +do { \ + __asm__ __volatile__ ( \ + ".align 2\n\t" \ + ".short %O0\n\t" \ + ".short %O1\n\t" \ + ".long %O2\n\t" \ + ".long %O3\n\t" \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__LINE__), "X" (__FILE__), \ + "X" (__FUNCTION__)); \ +} while (0) + +#else + +#define BUG() \ +do { \ + __asm__ __volatile__ ( \ + ".align 2\n\t" \ + ".short %O0\n\t" \ + : \ + : "n" (TRAPA_BUG_OPCODE)); \ } while (0) +#endif /* CONFIG_DEBUG_BUGVERBOSE */ + #define HAVE_ARCH_BUG -#endif + +#endif /* CONFIG_BUG */ #include -#endif +#endif /* __ASM_SH_BUG_H */ -- cgit v1.2.3 From 5432143464ee7f5cb8b0b015a0fd1c3279af10ae Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 Dec 2006 09:17:01 +0900 Subject: sh: Fixup dma_cache_sync() callers. This now takes a struct device, update all of the callers. Signed-off-by: Paul Mundt --- include/asm-sh/dma-mapping.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h index 37ab0c131a4..8d0867b98e0 100644 --- a/include/asm-sh/dma-mapping.h +++ b/include/asm-sh/dma-mapping.h @@ -67,7 +67,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, if (dev->bus == &pci_bus_type) return virt_to_bus(ptr); #endif - dma_cache_sync(ptr, size, dir); + dma_cache_sync(dev, ptr, size, dir); return virt_to_bus(ptr); } @@ -81,7 +81,7 @@ static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, for (i = 0; i < nents; i++) { #if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, dir); #endif sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; @@ -112,7 +112,7 @@ static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, if (dev->bus == &pci_bus_type) return; #endif - dma_cache_sync(bus_to_virt(dma_handle), size, dir); + dma_cache_sync(dev, bus_to_virt(dma_handle), size, dir); } static inline void dma_sync_single_range(struct device *dev, @@ -124,7 +124,7 @@ static inline void dma_sync_single_range(struct device *dev, if (dev->bus == &pci_bus_type) return; #endif - dma_cache_sync(bus_to_virt(dma_handle) + offset, size, dir); + dma_cache_sync(dev, bus_to_virt(dma_handle) + offset, size, dir); } static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, @@ -134,7 +134,7 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, for (i = 0; i < nelems; i++) { #if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, dir); #endif sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; -- cgit v1.2.3 From 41504c39726a7099e5a42508dd57fe561c8b4129 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 11 Dec 2006 20:28:03 +0900 Subject: sh: SH-MobileR SH7722 CPU support. This adds CPU support for the SH7722. Signed-off-by: Paul Mundt --- include/asm-sh/bugs.h | 12 ++++++++++-- include/asm-sh/cpu-sh4/cache.h | 2 +- include/asm-sh/cpu-sh4/freq.h | 2 +- include/asm-sh/irq.h | 5 ++++- include/asm-sh/processor.h | 8 ++++++-- 5 files changed, 22 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index 795047da5e1..a294997a841 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -16,9 +16,8 @@ static void __init check_bugs(void) { - extern char *get_cpu_subtype(void); extern unsigned long loops_per_jiffy; - char *p= &init_utsname()->machine[2]; /* "sh" */ + char *p = &init_utsname()->machine[2]; /* "sh" */ cpu_data->loops_per_jiffy = loops_per_jiffy; @@ -40,6 +39,15 @@ static void __init check_bugs(void) *p++ = '4'; *p++ = 'a'; break; + case CPU_SH73180 ... CPU_SH7722: + *p++ = '4'; + *p++ = 'a'; + *p++ = 'l'; + *p++ = '-'; + *p++ = 'd'; + *p++ = 's'; + *p++ = 'p'; + break; default: *p++ = '?'; *p++ = '!'; diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h index 6e9c7e6ee8e..f92b20a0983 100644 --- a/include/asm-sh/cpu-sh4/cache.h +++ b/include/asm-sh/cpu-sh4/cache.h @@ -22,7 +22,7 @@ #define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ #define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ #define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ -#ifndef CONFIG_CPU_SUBTYPE_SH7780 +#ifndef CONFIG_CPU_SH4A #define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ #endif diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index ef2b9b1ae41..602d061ca2d 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -10,7 +10,7 @@ #ifndef __ASM_CPU_SH4_FREQ_H #define __ASM_CPU_SH4_FREQ_H -#if defined(CONFIG_CPU_SUBTYPE_SH73180) +#if defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7722) #define FRQCR 0xa4150000 #elif defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index fd576088e47..bff965ef4b9 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -37,7 +37,8 @@ # define ONCHIP_NR_IRQS 144 #elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \ defined(CONFIG_CPU_SUBTYPE_SH73180) || \ - defined(CONFIG_CPU_SUBTYPE_SH7343) + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) # define ONCHIP_NR_IRQS 109 #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define ONCHIP_NR_IRQS 111 @@ -79,6 +80,8 @@ # define OFFCHIP_NR_IRQS 16 #elif defined(CONFIG_SH_7343_SOLUTION_ENGINE) # define OFFCHIP_NR_IRQS 12 +#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) +# define OFFCHIP_NR_IRQS 14 #elif defined(CONFIG_SH_UNKNOWN) # define OFFCHIP_NR_IRQS 16 /* Must also be last */ #else diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 6f1dd7ca1b1..e29f2abb92d 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -27,6 +27,8 @@ #define CCN_CVR 0xff000040 #define CCN_PRR 0xff000044 +const char *get_cpu_subtype(void); + /* * CPU type and hardware bug flags. Kept separately for each CPU. * @@ -52,8 +54,10 @@ enum cpu_type { CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781, - CPU_SH7785, + CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + + /* SH4AL-DSP types */ + CPU_SH73180, CPU_SH7343, CPU_SH7722, /* Unknown subtype */ CPU_SH_NONE -- cgit v1.2.3 From b723782587067d0d76344e9bdc934ca495aa8f0f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 11 Dec 2006 00:43:58 +0000 Subject: [MIPS] compat.h uses struct pt_regs so needs to include ptrace.h. Signed-off-by: Ralf Baechle --- include/asm-mips/compat.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h index 55a0152feb0..432653d7ae0 100644 --- a/include/asm-mips/compat.h +++ b/include/asm-mips/compat.h @@ -5,6 +5,7 @@ */ #include #include +#include #define COMPAT_USER_HZ 100 -- cgit v1.2.3 From 2f3643aecd1e4e6a4c34cb32eb0410340f34e97f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 11 Dec 2006 04:00:37 +0000 Subject: [MIPS] IP27: Don't include . Nothing defines is used. Signed-off-by: Ralf Baechle --- include/asm-mips/mach-ip27/irq.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-mips/mach-ip27/irq.h b/include/asm-mips/mach-ip27/irq.h index 806213ce31b..25f0c3f39ad 100644 --- a/include/asm-mips/mach-ip27/irq.h +++ b/include/asm-mips/mach-ip27/irq.h @@ -10,8 +10,6 @@ #ifndef __ASM_MACH_IP27_IRQ_H #define __ASM_MACH_IP27_IRQ_H -#include - /* * A hardwired interrupt number is completly stupid for this system - a * large configuration might have thousands if not tenthousands of -- cgit v1.2.3 From 2bbc5bdfb165521b28ca1825ea482557bffd3918 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 11 Dec 2006 04:07:40 +0000 Subject: [MIPS] IP27: Move definition of nic_t to its sole user. This also fixes the duplicate definition of nic_t in the s2io driver. Signed-off-by: Ralf Baechle --- include/asm-mips/sn/arch.h | 1 - include/asm-mips/sn/klconfig.h | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/sn/arch.h b/include/asm-mips/sn/arch.h index 51174af6ac5..da523de628b 100644 --- a/include/asm-mips/sn/arch.h +++ b/include/asm-mips/sn/arch.h @@ -18,7 +18,6 @@ #endif typedef u64 hubreg_t; -typedef u64 nic_t; #define cputonasid(cpu) (cpu_data[(cpu)].p_nasid) #define cputoslice(cpu) (cpu_data[(cpu)].p_slice) diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h index 15d70ca5618..82aeb9e322d 100644 --- a/include/asm-mips/sn/klconfig.h +++ b/include/asm-mips/sn/klconfig.h @@ -61,6 +61,8 @@ #endif /* CONFIG_SGI_IP35 */ #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ +typedef u64 nic_t; + #define KLCFGINFO_MAGIC 0xbeedbabe typedef s32 klconf_off_t; -- cgit v1.2.3 From 8b2f35504d81422beb9e3562ee3dd99e8567cc80 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 11 Dec 2006 04:17:30 +0000 Subject: [MIPS] IP27: Don't drag into topology.h. Another way that old SGI types were getting dragged into generic code. Signed-off-by: Ralf Baechle --- include/asm-mips/mach-ip27/topology.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h index a13b715fd9c..44790fdc5d0 100644 --- a/include/asm-mips/mach-ip27/topology.h +++ b/include/asm-mips/mach-ip27/topology.h @@ -1,7 +1,6 @@ #ifndef _ASM_MACH_TOPOLOGY_H #define _ASM_MACH_TOPOLOGY_H 1 -#include #include #include -- cgit v1.2.3 From 2b02a1792000900ead4638f4d42fcdd742062cfa Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Tue, 5 Dec 2006 10:19:14 +0100 Subject: [PATCH] remove blk_queue_activity_fn While working on bidi support at struct request level I have found that blk_queue_activity_fn is actually never used. The only user is in ide-probe.c with this code: /* enable led activity for disk drives only */ if (drive->media == ide_disk && hwif->led_act) blk_queue_activity_fn(q, hwif->led_act, drive); And led_act is never initialized anywhere. (Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18) Unless it is all for future use off course. (this patch is against linux-2.6-block.git as off 2006/12/4) Signed-off-by: Boaz Harrosh Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 5 ----- include/linux/ide.h | 2 -- 2 files changed, 7 deletions(-) (limited to 'include') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e1c7286165f..ea330d7b46c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -342,7 +342,6 @@ typedef void (unplug_fn) (request_queue_t *); struct bio_vec; typedef int (merge_bvec_fn) (request_queue_t *, struct bio *, struct bio_vec *); -typedef void (activity_fn) (void *data, int rw); typedef int (issue_flush_fn) (request_queue_t *, struct gendisk *, sector_t *); typedef void (prepare_flush_fn) (request_queue_t *, struct request *); typedef void (softirq_done_fn)(struct request *); @@ -384,7 +383,6 @@ struct request_queue prep_rq_fn *prep_rq_fn; unplug_fn *unplug_fn; merge_bvec_fn *merge_bvec_fn; - activity_fn *activity_fn; issue_flush_fn *issue_flush_fn; prepare_flush_fn *prepare_flush_fn; softirq_done_fn *softirq_done_fn; @@ -411,8 +409,6 @@ struct request_queue */ void *queuedata; - void *activity_data; - /* * queue needs bounce pages for pages above this limit */ @@ -677,7 +673,6 @@ extern void blk_sync_queue(struct request_queue *q); extern void __blk_stop_queue(request_queue_t *q); extern void blk_run_queue(request_queue_t *); extern void blk_start_queueing(request_queue_t *); -extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *); extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned long); extern int blk_rq_unmap_user(struct request *); extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t); diff --git a/include/linux/ide.h b/include/linux/ide.h index 64e070f62a8..e26a03981a9 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -804,8 +804,6 @@ typedef struct hwif_s { void *hwif_data; /* extra hwif data */ unsigned dma; - - void (*led_act)(void *data, int rw); } ____cacheline_internodealigned_in_smp ide_hwif_t; /* -- cgit v1.2.3 From 99a3eb3845f034eb55640a3da73e5e28349678c6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 12 Dec 2006 12:10:28 +0100 Subject: [PATCH] lockdep: fix seqlock_init() seqlock_init() needs to use spin_lock_init() for dynamic locks, so that lockdep is notified about the presence of a new lock. (this is a fallout of the recent networking merge, which started using the so-far unused seqlock_init() API.) This fix solves the following lockdep-internal warning on current -git: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. __lock_acquire+0x10c/0x9f9 lock_acquire+0x56/0x72 _spin_lock+0x35/0x42 neigh_destroy+0x9d/0x12e neigh_periodic_timer+0x10a/0x15c run_timer_softirq+0x126/0x18e __do_softirq+0x6b/0xe6 do_softirq+0x64/0xd2 ksoftirqd+0x82/0x138 Signed-off-by: Ingo Molnar Signed-off-by: Linus Torvalds --- include/linux/seqlock.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index 46000936f8f..6b0648cfdff 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -44,8 +44,11 @@ typedef struct { #define SEQLOCK_UNLOCKED \ __SEQLOCK_UNLOCKED(old_style_seqlock_init) -#define seqlock_init(x) \ - do { *(x) = (seqlock_t) __SEQLOCK_UNLOCKED(x); } while (0) +#define seqlock_init(x) \ + do { \ + (x)->sequence = 0; \ + spin_lock_init(&(x)->lock); \ + } while (0) #define DEFINE_SEQLOCK(x) \ seqlock_t x = __SEQLOCK_UNLOCKED(x) -- cgit v1.2.3 From 8e9afcbbdef71aeeb510732f4f8d5ac3de863df0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 12 Dec 2006 18:18:28 +0100 Subject: hwmon/it87: Remove the SMBus interface support This interface was useless as the LPC ISA-like interface is always available, is faster, and is more reliable. This cuts the driver size by some 20%. This change is also required to later convert the it87 driver to a platform driver, so that we can get rid of i2c-isa in a near future. Signed-off-by: Jean Delvare --- include/linux/i2c-id.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 0a8f750cbed..9dc984b5f89 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -144,7 +144,6 @@ #define I2C_DRIVERID_MTP008 1023 #define I2C_DRIVERID_DS1621 1024 #define I2C_DRIVERID_ADM1024 1025 -#define I2C_DRIVERID_IT87 1026 #define I2C_DRIVERID_CH700X 1027 /* single driver for CH7003-7009 digital pc to tv encoders */ #define I2C_DRIVERID_FSCPOS 1028 #define I2C_DRIVERID_FSCSCY 1029 -- cgit v1.2.3 From 93aec204002b6ccd4daf0d02363a8227f21bf70f Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Tue, 12 Dec 2006 19:23:02 +0100 Subject: Remove duplicate "have to" in comment Introduced in commit 7cc13edc139108bb527b692f0548dce6bc648572. Signed-off-by: Rolf Eike Beer Acked-by: Eric W. Biederman Signed-off-by: Adrian Bunk --- include/linux/sysctl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 6d8846e7be6..81480e61346 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -11,7 +11,7 @@ ** the sysctl() binary interface. Do *NOT* change the ** numbering of any existing values here, and do not change ** any numbers within any one set of values. If you have to - ** have to redefine an existing interface, use a new number for it. + ** redefine an existing interface, use a new number for it. ** The kernel will then return -ENOTDIR to any application using ** the old binary interface. ** -- cgit v1.2.3 From 53569ab7851fd564427f7529b17162cba9a28407 Mon Sep 17 00:00:00 2001 From: Alistair John Strachan Date: Tue, 12 Dec 2006 19:28:50 +0100 Subject: include/linux/compiler.h: reject gcc 3 < gcc 3.2 The kernel doesn't compile with GCC <3.2, do not allow it to succeed if GCC 3.0.x or 3.1.x are used. Signed-off-by: Alistair John Strachan Signed-off-by: Adrian Bunk --- include/linux/compiler.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 538423d4a86..aca66984aaf 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -40,7 +40,7 @@ extern void __chk_io_ptr(void __iomem *); #error no compiler-gcc.h file for this gcc version #elif __GNUC__ == 4 # include -#elif __GNUC__ == 3 +#elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2 # include #else # error Sorry, your compiler is too old/not recognized. -- cgit v1.2.3 From df4365ce8829e84e8e6fe7d2371ea8f40630e865 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 12 Dec 2006 20:05:50 +0100 Subject: configfs.h: Remove dead macro definitions. Delete the __ATTR-related macro definitions since these are now defined in include/linux/sysfs.h. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- include/linux/configfs.h | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'include') diff --git a/include/linux/configfs.h b/include/linux/configfs.h index a7f01502753..fef6f3d0a4a 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -160,31 +160,6 @@ struct configfs_group_operations { void (*drop_item)(struct config_group *group, struct config_item *item); }; - - -/** - * Use these macros to make defining attributes easier. See include/linux/device.h - * for examples.. - */ - -#if 0 -#define __ATTR(_name,_mode,_show,_store) { \ - .attr = {.ca_name = __stringify(_name), .ca_mode = _mode, .ca_owner = THIS_MODULE }, \ - .show = _show, \ - .store = _store, \ -} - -#define __ATTR_RO(_name) { \ - .attr = { .ca_name = __stringify(_name), .ca_mode = 0444, .ca_owner = THIS_MODULE }, \ - .show = _name##_show, \ -} - -#define __ATTR_NULL { .attr = { .name = NULL } } - -#define attr_name(_attr) (_attr).attr.name -#endif - - struct configfs_subsystem { struct config_group su_group; struct semaphore su_sem; -- cgit v1.2.3 From a460ef8d0a98ac9ef6b829ae292c9b6c13bc0120 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Wed, 22 Nov 2006 08:25:00 -0600 Subject: [IA64] fix possible XPC deadlock when disconnecting This patch eliminates a potential deadlock that is possible when XPC disconnects a channel to a partition that has gone down. This deadlock will occur if at least one of the kthreads created by XPC for the purpose of making callouts to the channel's registerer is detained in the registerer and will not be returning back to XPC until some registerer request occurs on the now downed partition. The potential for a deadlock is removed by ensuring that there always is a kthread available to make the channel disconnecting callout to the registerer. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- include/asm-ia64/sn/xpc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-ia64/sn/xpc.h b/include/asm-ia64/sn/xpc.h index 1d45e1518fb..e52b8508083 100644 --- a/include/asm-ia64/sn/xpc.h +++ b/include/asm-ia64/sn/xpc.h @@ -673,7 +673,7 @@ extern irqreturn_t xpc_notify_IRQ_handler(int, void *); extern void xpc_dropped_IPI_check(struct xpc_partition *); extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); -extern void xpc_create_kthreads(struct xpc_channel *, int); +extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); -- cgit v1.2.3 From 9b2e9c0c241e532d923fff23d9a7c0bd31bd96b1 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 30 Nov 2006 16:30:47 -0800 Subject: RDMA/cma: Remove unneeded qp_type parameter from rdma_cm The qp_type parameter into the rdma_cm is unneeded, and can be misleading. The QP type should be determined from the port space. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- include/rdma/rdma_cm.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index deb5a0a4cee..4c07f9699d0 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -215,7 +215,6 @@ struct rdma_conn_param { /* Fields below ignored if a QP is created on the rdma_cm_id. */ u8 srq; u32 qp_num; - enum ib_qp_type qp_type; }; /** -- cgit v1.2.3 From a1b1b61f80aba49f1e0f32b0e4b1c35be91c57fa Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 30 Nov 2006 16:33:14 -0800 Subject: RDMA/cma: Report connect info with connect events Connection information was never given to the recipient of a connection request or reply message. Only the event was delivered. Report the connection data with the event to allows user to reject the connection based on the requested parameters, or adjust their resources to match the request. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- include/rdma/rdma_cm.h | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index 4c07f9699d0..aa6ce47537a 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -77,11 +77,25 @@ struct rdma_route { int num_paths; }; +struct rdma_conn_param { + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 flow_control; + u8 retry_count; /* ignored when accepting */ + u8 rnr_retry_count; + /* Fields below ignored if a QP is created on the rdma_cm_id. */ + u8 srq; + u32 qp_num; +}; + struct rdma_cm_event { enum rdma_cm_event_type event; int status; - void *private_data; - u8 private_data_len; + union { + struct rdma_conn_param conn; + } param; }; struct rdma_cm_id; @@ -204,19 +218,6 @@ void rdma_destroy_qp(struct rdma_cm_id *id); int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, int *qp_attr_mask); -struct rdma_conn_param { - const void *private_data; - u8 private_data_len; - u8 responder_resources; - u8 initiator_depth; - u8 flow_control; - u8 retry_count; /* ignored when accepting */ - u8 rnr_retry_count; - /* Fields below ignored if a QP is created on the rdma_cm_id. */ - u8 srq; - u32 qp_num; -}; - /** * rdma_connect - Initiate an active connection request. * -- cgit v1.2.3 From 0fe313b000b6a699afbbb59ef9c47a2b22146f1e Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 30 Nov 2006 16:37:15 -0800 Subject: RDMA/cma: Allow early transition to RTS to handle lost CM messages During connection establishment, the passive side of a connection can receive messages from the active side before the connection event has been delivered to the user. Allow the passive side to send messages in response to received data before the event is delivered. To handle the case where the connection messages are lost, a new rdma_notify() function is added that users may invoke to force a connection into the established state. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- include/rdma/rdma_cm.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include') diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index aa6ce47537a..6b8ec486d06 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -252,6 +252,21 @@ int rdma_listen(struct rdma_cm_id *id, int backlog); */ int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); +/** + * rdma_notify - Notifies the RDMA CM of an asynchronous event that has + * occurred on the connection. + * @id: Connection identifier to transition to established. + * @event: Asynchronous event. + * + * This routine should be invoked by users to notify the CM of relevant + * communication events. Events that should be reported to the CM and + * when to report them are: + * + * IB_EVENT_COMM_EST - Used when a message is received on a connected + * QP before an RTU has been received. + */ +int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event); + /** * rdma_reject - Called to reject a connection request or response. */ -- cgit v1.2.3 From 628e5f6d39d5a6be96c1272a6709f2dd3ec8b7ce Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 30 Nov 2006 16:44:16 -0800 Subject: RDMA/cma: Add support for RDMA_PS_UDP Allow the use of UD QPs through the rdma_cm, in order to provide address translation services for resolving IB addresses for datagram messages using SIDR. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- include/rdma/rdma_cm.h | 15 +++++++++++++++ include/rdma/rdma_cm_ib.h | 3 +++ 2 files changed, 18 insertions(+) (limited to 'include') diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index 6b8ec486d06..36cd8a8526a 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -90,11 +90,20 @@ struct rdma_conn_param { u32 qp_num; }; +struct rdma_ud_param { + const void *private_data; + u8 private_data_len; + struct ib_ah_attr ah_attr; + u32 qp_num; + u32 qkey; +}; + struct rdma_cm_event { enum rdma_cm_event_type event; int status; union { struct rdma_conn_param conn; + struct rdma_ud_param ud; } param; }; @@ -220,9 +229,15 @@ int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, /** * rdma_connect - Initiate an active connection request. + * @id: Connection identifier to connect. + * @conn_param: Connection information used for connected QPs. * * Users must have resolved a route for the rdma_cm_id to connect with * by having called rdma_resolve_route before calling this routine. + * + * This call will either connect to a remote QP or obtain remote QP + * information for unconnected rdma_cm_id's. The actual operation is + * based on the rdma_cm_id's port space. */ int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); diff --git a/include/rdma/rdma_cm_ib.h b/include/rdma/rdma_cm_ib.h index e8c3af1804d..9b176df1d66 100644 --- a/include/rdma/rdma_cm_ib.h +++ b/include/rdma/rdma_cm_ib.h @@ -44,4 +44,7 @@ int rdma_set_ib_paths(struct rdma_cm_id *id, struct ib_sa_path_rec *path_rec, int num_paths); +/* Global qkey for UD QPs and multicast groups. */ +#define RDMA_UD_QKEY 0x01234567 + #endif /* RDMA_CM_IB_H */ -- cgit v1.2.3 From 75216638572f53612304c05a374f0246fe1d16da Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 30 Nov 2006 16:53:41 -0800 Subject: RDMA/cma: Export rdma cm interface to userspace Export the rdma cm interfaces to userspace via a misc device. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- include/rdma/ib_marshall.h | 5 +- include/rdma/rdma_user_cm.h | 206 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 210 insertions(+), 1 deletion(-) create mode 100644 include/rdma/rdma_user_cm.h (limited to 'include') diff --git a/include/rdma/ib_marshall.h b/include/rdma/ib_marshall.h index 66bf4d7d0df..db037205c9e 100644 --- a/include/rdma/ib_marshall.h +++ b/include/rdma/ib_marshall.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2005-2006 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -41,6 +41,9 @@ void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst, struct ib_qp_attr *src); +void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst, + struct ib_ah_attr *src); + void ib_copy_path_rec_to_user(struct ib_user_path_rec *dst, struct ib_sa_path_rec *src); diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h new file mode 100644 index 00000000000..9572ab8eeac --- /dev/null +++ b/include/rdma/rdma_user_cm.h @@ -0,0 +1,206 @@ +/* + * Copyright (c) 2005-2006 Intel Corporation. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef RDMA_USER_CM_H +#define RDMA_USER_CM_H + +#include +#include +#include +#include + +#define RDMA_USER_CM_ABI_VERSION 3 + +#define RDMA_MAX_PRIVATE_DATA 256 + +enum { + RDMA_USER_CM_CMD_CREATE_ID, + RDMA_USER_CM_CMD_DESTROY_ID, + RDMA_USER_CM_CMD_BIND_ADDR, + RDMA_USER_CM_CMD_RESOLVE_ADDR, + RDMA_USER_CM_CMD_RESOLVE_ROUTE, + RDMA_USER_CM_CMD_QUERY_ROUTE, + RDMA_USER_CM_CMD_CONNECT, + RDMA_USER_CM_CMD_LISTEN, + RDMA_USER_CM_CMD_ACCEPT, + RDMA_USER_CM_CMD_REJECT, + RDMA_USER_CM_CMD_DISCONNECT, + RDMA_USER_CM_CMD_INIT_QP_ATTR, + RDMA_USER_CM_CMD_GET_EVENT, + RDMA_USER_CM_CMD_GET_OPTION, + RDMA_USER_CM_CMD_SET_OPTION, + RDMA_USER_CM_CMD_NOTIFY +}; + +/* + * command ABI structures. + */ +struct rdma_ucm_cmd_hdr { + __u32 cmd; + __u16 in; + __u16 out; +}; + +struct rdma_ucm_create_id { + __u64 uid; + __u64 response; + __u16 ps; + __u8 reserved[6]; +}; + +struct rdma_ucm_create_id_resp { + __u32 id; +}; + +struct rdma_ucm_destroy_id { + __u64 response; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_destroy_id_resp { + __u32 events_reported; +}; + +struct rdma_ucm_bind_addr { + __u64 response; + struct sockaddr_in6 addr; + __u32 id; +}; + +struct rdma_ucm_resolve_addr { + struct sockaddr_in6 src_addr; + struct sockaddr_in6 dst_addr; + __u32 id; + __u32 timeout_ms; +}; + +struct rdma_ucm_resolve_route { + __u32 id; + __u32 timeout_ms; +}; + +struct rdma_ucm_query_route { + __u64 response; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_query_route_resp { + __u64 node_guid; + struct ib_user_path_rec ib_route[2]; + struct sockaddr_in6 src_addr; + struct sockaddr_in6 dst_addr; + __u32 num_paths; + __u8 port_num; + __u8 reserved[3]; +}; + +struct rdma_ucm_conn_param { + __u32 qp_num; + __u32 reserved; + __u8 private_data[RDMA_MAX_PRIVATE_DATA]; + __u8 private_data_len; + __u8 srq; + __u8 responder_resources; + __u8 initiator_depth; + __u8 flow_control; + __u8 retry_count; + __u8 rnr_retry_count; + __u8 valid; +}; + +struct rdma_ucm_ud_param { + __u32 qp_num; + __u32 qkey; + struct ib_uverbs_ah_attr ah_attr; + __u8 private_data[RDMA_MAX_PRIVATE_DATA]; + __u8 private_data_len; + __u8 reserved[7]; +}; + +struct rdma_ucm_connect { + struct rdma_ucm_conn_param conn_param; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_listen { + __u32 id; + __u32 backlog; +}; + +struct rdma_ucm_accept { + __u64 uid; + struct rdma_ucm_conn_param conn_param; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_reject { + __u32 id; + __u8 private_data_len; + __u8 reserved[3]; + __u8 private_data[RDMA_MAX_PRIVATE_DATA]; +}; + +struct rdma_ucm_disconnect { + __u32 id; +}; + +struct rdma_ucm_init_qp_attr { + __u64 response; + __u32 id; + __u32 qp_state; +}; + +struct rdma_ucm_notify { + __u32 id; + __u32 event; +}; + +struct rdma_ucm_get_event { + __u64 response; +}; + +struct rdma_ucm_event_resp { + __u64 uid; + __u32 id; + __u32 event; + __u32 status; + union { + struct rdma_ucm_conn_param conn; + struct rdma_ucm_ud_param ud; + } param; +}; + +#endif /* RDMA_USER_CM_H */ -- cgit v1.2.3 From 08ed38b68099f2a492196414b08a7f5dd8dc3537 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Tue, 14 Nov 2006 09:33:38 -0800 Subject: [IA64] enable trap code on slot 1 Because slot 1 of one instr bundle crosses border of two consecutive 8-bytes, kprobe on slot 1 is disabled. This patch enables kprobe on slot1, it only replaces higher 8-bytes of the instruction bundle and changes the exception code to ignore the low 12 bits of the break number (which is across the border in the lower 8-bytes of the bundle). For those instructions which must execute regardless qp bits, kprobe on slot 1 is still disabled. Signed-off-by: bibo,mao Signed-off-by: Tony Luck --- include/asm-ia64/break.h | 4 ++-- include/asm-ia64/kprobes.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-ia64/break.h b/include/asm-ia64/break.h index 8167828edc4..f0340203989 100644 --- a/include/asm-ia64/break.h +++ b/include/asm-ia64/break.h @@ -12,8 +12,8 @@ * OS-specific debug break numbers: */ #define __IA64_BREAK_KDB 0x80100 -#define __IA64_BREAK_KPROBE 0x80200 -#define __IA64_BREAK_JPROBE 0x80300 +#define __IA64_BREAK_KPROBE 0x81000 /* .. 0x81fff */ +#define __IA64_BREAK_JPROBE 0x82000 /* * OS-specific break numbers: diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h index 1b45b71c79b..828ae00e47c 100644 --- a/include/asm-ia64/kprobes.h +++ b/include/asm-ia64/kprobes.h @@ -115,6 +115,7 @@ struct arch_specific_insn { #define INST_FLAG_BREAK_INST 4 unsigned long inst_flag; unsigned short target_br_reg; + unsigned short slot; }; extern int kprobe_exceptions_notify(struct notifier_block *self, -- cgit v1.2.3 From 9b513090a3c5e4964f9ac09016c1586988abb3d5 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Tue, 12 Dec 2006 14:27:41 -0800 Subject: IB: Add DMA mapping functions to allow device drivers to interpose The QLogic InfiniPath HCAs use programmed I/O instead of HW DMA. This patch allows a verbs device driver to interpose on DMA mapping function calls in order to avoid relying on bus_to_virt() and phys_to_virt() to undo the mappings created by dma_map_single(), dma_map_sg(), etc. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- include/rdma/ib_verbs.h | 253 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 253 insertions(+) (limited to 'include') diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 8eacc351099..fd2353fa7e1 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -43,6 +43,8 @@ #include #include +#include +#include #include #include @@ -848,6 +850,49 @@ struct ib_cache { u8 *lmc_cache; }; +struct ib_dma_mapping_ops { + int (*mapping_error)(struct ib_device *dev, + u64 dma_addr); + u64 (*map_single)(struct ib_device *dev, + void *ptr, size_t size, + enum dma_data_direction direction); + void (*unmap_single)(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction); + u64 (*map_page)(struct ib_device *dev, + struct page *page, unsigned long offset, + size_t size, + enum dma_data_direction direction); + void (*unmap_page)(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction); + int (*map_sg)(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction); + void (*unmap_sg)(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction); + u64 (*dma_address)(struct ib_device *dev, + struct scatterlist *sg); + unsigned int (*dma_len)(struct ib_device *dev, + struct scatterlist *sg); + void (*sync_single_for_cpu)(struct ib_device *dev, + u64 dma_handle, + size_t size, + enum dma_data_direction dir); + void (*sync_single_for_device)(struct ib_device *dev, + u64 dma_handle, + size_t size, + enum dma_data_direction dir); + void *(*alloc_coherent)(struct ib_device *dev, + size_t size, + u64 *dma_handle, + gfp_t flag); + void (*free_coherent)(struct ib_device *dev, + size_t size, void *cpu_addr, + u64 dma_handle); +}; + struct iw_cm_verbs; struct ib_device { @@ -992,6 +1037,8 @@ struct ib_device { struct ib_mad *in_mad, struct ib_mad *out_mad); + struct ib_dma_mapping_ops *dma_ops; + struct module *owner; struct class_device class_dev; struct kobject ports_parent; @@ -1395,9 +1442,215 @@ static inline int ib_req_ncomp_notif(struct ib_cq *cq, int wc_cnt) * usable for DMA. * @pd: The protection domain associated with the memory region. * @mr_access_flags: Specifies the memory access rights. + * + * Note that the ib_dma_*() functions defined below must be used + * to create/destroy addresses used with the Lkey or Rkey returned + * by ib_get_dma_mr(). */ struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags); +/** + * ib_dma_mapping_error - check a DMA addr for error + * @dev: The device for which the dma_addr was created + * @dma_addr: The DMA address to check + */ +static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr) +{ + return dev->dma_ops ? + dev->dma_ops->mapping_error(dev, dma_addr) : + dma_mapping_error(dma_addr); +} + +/** + * ib_dma_map_single - Map a kernel virtual address to DMA address + * @dev: The device for which the dma_addr is to be created + * @cpu_addr: The kernel virtual address + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline u64 ib_dma_map_single(struct ib_device *dev, + void *cpu_addr, size_t size, + enum dma_data_direction direction) +{ + return dev->dma_ops ? + dev->dma_ops->map_single(dev, cpu_addr, size, direction) : + dma_map_single(dev->dma_device, cpu_addr, size, direction); +} + +/** + * ib_dma_unmap_single - Destroy a mapping created by ib_dma_map_single() + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline void ib_dma_unmap_single(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction) +{ + dev->dma_ops ? + dev->dma_ops->unmap_single(dev, addr, size, direction) : + dma_unmap_single(dev->dma_device, addr, size, direction); +} + +/** + * ib_dma_map_page - Map a physical page to DMA address + * @dev: The device for which the dma_addr is to be created + * @page: The page to be mapped + * @offset: The offset within the page + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline u64 ib_dma_map_page(struct ib_device *dev, + struct page *page, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + return dev->dma_ops ? + dev->dma_ops->map_page(dev, page, offset, size, direction) : + dma_map_page(dev->dma_device, page, offset, size, direction); +} + +/** + * ib_dma_unmap_page - Destroy a mapping created by ib_dma_map_page() + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline void ib_dma_unmap_page(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction) +{ + dev->dma_ops ? + dev->dma_ops->unmap_page(dev, addr, size, direction) : + dma_unmap_page(dev->dma_device, addr, size, direction); +} + +/** + * ib_dma_map_sg - Map a scatter/gather list to DMA addresses + * @dev: The device for which the DMA addresses are to be created + * @sg: The array of scatter/gather entries + * @nents: The number of scatter/gather entries + * @direction: The direction of the DMA + */ +static inline int ib_dma_map_sg(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + return dev->dma_ops ? + dev->dma_ops->map_sg(dev, sg, nents, direction) : + dma_map_sg(dev->dma_device, sg, nents, direction); +} + +/** + * ib_dma_unmap_sg - Unmap a scatter/gather list of DMA addresses + * @dev: The device for which the DMA addresses were created + * @sg: The array of scatter/gather entries + * @nents: The number of scatter/gather entries + * @direction: The direction of the DMA + */ +static inline void ib_dma_unmap_sg(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + dev->dma_ops ? + dev->dma_ops->unmap_sg(dev, sg, nents, direction) : + dma_unmap_sg(dev->dma_device, sg, nents, direction); +} + +/** + * ib_sg_dma_address - Return the DMA address from a scatter/gather entry + * @dev: The device for which the DMA addresses were created + * @sg: The scatter/gather entry + */ +static inline u64 ib_sg_dma_address(struct ib_device *dev, + struct scatterlist *sg) +{ + return dev->dma_ops ? + dev->dma_ops->dma_address(dev, sg) : sg_dma_address(sg); +} + +/** + * ib_sg_dma_len - Return the DMA length from a scatter/gather entry + * @dev: The device for which the DMA addresses were created + * @sg: The scatter/gather entry + */ +static inline unsigned int ib_sg_dma_len(struct ib_device *dev, + struct scatterlist *sg) +{ + return dev->dma_ops ? + dev->dma_ops->dma_len(dev, sg) : sg_dma_len(sg); +} + +/** + * ib_dma_sync_single_for_cpu - Prepare DMA region to be accessed by CPU + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @dir: The direction of the DMA + */ +static inline void ib_dma_sync_single_for_cpu(struct ib_device *dev, + u64 addr, + size_t size, + enum dma_data_direction dir) +{ + dev->dma_ops ? + dev->dma_ops->sync_single_for_cpu(dev, addr, size, dir) : + dma_sync_single_for_cpu(dev->dma_device, addr, size, dir); +} + +/** + * ib_dma_sync_single_for_device - Prepare DMA region to be accessed by device + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @dir: The direction of the DMA + */ +static inline void ib_dma_sync_single_for_device(struct ib_device *dev, + u64 addr, + size_t size, + enum dma_data_direction dir) +{ + dev->dma_ops ? + dev->dma_ops->sync_single_for_device(dev, addr, size, dir) : + dma_sync_single_for_device(dev->dma_device, addr, size, dir); +} + +/** + * ib_dma_alloc_coherent - Allocate memory and map it for DMA + * @dev: The device for which the DMA address is requested + * @size: The size of the region to allocate in bytes + * @dma_handle: A pointer for returning the DMA address of the region + * @flag: memory allocator flags + */ +static inline void *ib_dma_alloc_coherent(struct ib_device *dev, + size_t size, + u64 *dma_handle, + gfp_t flag) +{ + return dev->dma_ops ? + dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag) : + dma_alloc_coherent(dev->dma_device, size, dma_handle, flag); +} + +/** + * ib_dma_free_coherent - Free memory allocated by ib_dma_alloc_coherent() + * @dev: The device for which the DMA addresses were allocated + * @size: The size of the region + * @cpu_addr: the address returned by ib_dma_alloc_coherent() + * @dma_handle: the DMA address returned by ib_dma_alloc_coherent() + */ +static inline void ib_dma_free_coherent(struct ib_device *dev, + size_t size, void *cpu_addr, + u64 dma_handle) +{ + dev->dma_ops ? + dev->dma_ops->free_coherent(dev, size, cpu_addr, dma_handle) : + dma_free_coherent(dev->dma_device, size, cpu_addr, dma_handle); +} + /** * ib_reg_phys_mr - Prepares a virtually addressed memory region for use * by an HCA. -- cgit v1.2.3 From e11952b971ee729a8fdc2bfb1252f5760c0287b0 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Mon, 4 Dec 2006 20:39:16 -0500 Subject: [CPUFREQ] p4-clockmod: fix support for Core Support for Core CPUs was broken in two ways in speedstep-lib: for x86_64, we missed a MSR definition; for both x86_64 and i386, the FSB calculation was wrong by four (it's a quad-pumped bus). Also increase the accuracy of the calculation. Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones --- include/asm-x86_64/msr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h index e6158228873..207fed998a0 100644 --- a/include/asm-x86_64/msr.h +++ b/include/asm-x86_64/msr.h @@ -189,6 +189,7 @@ static inline unsigned int cpuid_edx(unsigned int op) #define MSR_IA32_PERFCTR0 0xc1 #define MSR_IA32_PERFCTR1 0xc2 +#define MSR_FSB_FREQ 0xcd #define MSR_MTRRcap 0x0fe #define MSR_IA32_BBL_CR_CTL 0x119 -- cgit v1.2.3 From ad1ae2fe7fe68414ef29eab3c87b48841f8b72f2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 13 Dec 2006 14:34:43 +0000 Subject: [ARM] Unuse another Linux PTE bit L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King --- include/asm-arm/cpu-multi32.h | 7 ++++--- include/asm-arm/cpu-single.h | 4 ++-- include/asm-arm/pgtable.h | 11 +++++++---- 3 files changed, 13 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h index 4679f63688e..715e18a4add 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/include/asm-arm/cpu-multi32.h @@ -50,9 +50,10 @@ extern struct processor { */ void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); /* - * Set a PTE + * Set a possibly extended PTE. Non-extended PTEs should + * ignore 'ext'. */ - void (*set_pte)(pte_t *ptep, pte_t pte); + void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); } processor; #define cpu_proc_init() processor._proc_init() @@ -60,5 +61,5 @@ extern struct processor { #define cpu_reset(addr) processor.reset(addr) #define cpu_do_idle() processor._do_idle() #define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte(ptep, pte) processor.set_pte(ptep, pte) +#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) #define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h index 6723e67244f..0b120ee3609 100644 --- a/include/asm-arm/cpu-single.h +++ b/include/asm-arm/cpu-single.h @@ -28,7 +28,7 @@ #define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle) #define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area) #define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm) -#define cpu_set_pte __cpu_fn(CPU_NAME,_set_pte) +#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext) #include @@ -40,5 +40,5 @@ extern void cpu_proc_fin(void); extern int cpu_do_idle(void); extern void cpu_dcache_clean_area(void *, int); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); -extern void cpu_set_pte(pte_t *ptep, pte_t pte); +extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index 88cd5c784ef..b8cf2d5ec30 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -21,6 +21,7 @@ #include #include +#include /* * Just any arbitrary offset to the start of the vmalloc VM area: the @@ -170,7 +171,6 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define L_PTE_EXEC (1 << 6) #define L_PTE_DIRTY (1 << 7) #define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ -#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */ #ifndef __ASSEMBLY__ @@ -228,7 +228,7 @@ extern struct page *empty_zero_page; #define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) #define pte_none(pte) (!pte_val(pte)) -#define pte_clear(mm,addr,ptep) set_pte_at((mm),(addr),(ptep), __pte(0)) +#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) #define pte_page(pte) (pfn_to_page(pte_pfn(pte))) #define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) #define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) @@ -236,8 +236,11 @@ extern struct page *empty_zero_page; #define pte_unmap(pte) do { } while (0) #define pte_unmap_nested(pte) do { } while (0) -#define set_pte(ptep, pte) cpu_set_pte(ptep,pte) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) +#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) + +#define set_pte_at(mm,addr,ptep,pteval) do { \ + set_pte_ext(ptep, pteval, (addr) >= PAGE_OFFSET ? 0 : PTE_EXT_NG); \ + } while (0) /* * The following only work if pte_present() is true. -- cgit v1.2.3 From d4c3cca941b64a938eaa9734585a93547c6be323 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 13 Dec 2006 00:34:04 -0800 Subject: [PATCH] constify pipe_buf_operations - pipe/splice should use const pipe_buf_operations and file_operations - struct pipe_inode_info has an unused field "start" : get rid of it. Signed-off-by: Eric Dumazet Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pipe_fs_i.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index ea4f7cd7bfd..cc902d242c4 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -12,7 +12,7 @@ struct pipe_buffer { struct page *page; unsigned int offset, len; - struct pipe_buf_operations *ops; + const struct pipe_buf_operations *ops; unsigned int flags; }; @@ -43,7 +43,6 @@ struct pipe_inode_info { unsigned int nrbufs, curbuf; struct pipe_buffer bufs[PIPE_BUFFERS]; struct page *tmp_page; - unsigned int start; unsigned int readers; unsigned int writers; unsigned int waiting_writers; -- cgit v1.2.3 From 5f8442edfb214908e9c6ca1142bf882c9bc364e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 13 Dec 2006 00:34:04 -0800 Subject: [PATCH] Revert "[PATCH] identifier to nsproxy" This reverts commit 373beb35cd6b625e0ba4ad98baace12310a26aa8. No one is using this identifier yet. The purpose of this identifier is to export nsproxy to user space which is wrong. nsproxy is an internal implementation optimization, which should keep our fork times from getting slower as we increase the number of global namespaces you don't have to share. Adding a global identifier like this is inappropriate because it makes namespaces inherently non-recursive, greatly limiting what we can do with them in the future. Signed-off-by: Eric W. Biederman Cc: Cedric Le Goater Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 1 - include/linux/nsproxy.h | 1 - 2 files changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index b5315150199..6383d2d83bb 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -75,7 +75,6 @@ extern struct nsproxy init_nsproxy; .pid_ns = &init_pid_ns, \ .count = ATOMIC_INIT(1), \ .nslock = __SPIN_LOCK_UNLOCKED(nsproxy.nslock), \ - .id = 0, \ .uts_ns = &init_uts_ns, \ .mnt_ns = NULL, \ INIT_IPC_NS(ipc_ns) \ diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index fdfb0e44912..0b9f0dc30d6 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -24,7 +24,6 @@ struct pid_namespace; struct nsproxy { atomic_t count; spinlock_t nslock; - unsigned long id; struct uts_namespace *uts_ns; struct ipc_namespace *ipc_ns; struct mnt_namespace *mnt_ns; -- cgit v1.2.3 From 6a8ba9d12150461acc91bd3c9124eac19e853218 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 13 Dec 2006 00:34:10 -0800 Subject: [PATCH] reorder struct pipe_buf_operations Fields of struct pipe_buf_operations have not a precise layout (ie not optimized to fit cache lines nor reduce cache line ping pongs) The bufs[] array is *large* and is placed near the beginning of the structure, so all following fields have a large offset. This is unfortunate because many archs have smaller instructions when using small offsets relative to a base register. On x86 for example, 7 bits offsets have smaller instruction lengths. Moving bufs[] at the end of pipe_buf_operations permits all fields to have small offsets, and reduce text size, and icache pressure. # size vmlinux.pre vmlinux text data bss dec hex filename 3268989 664356 492196 4425541 438745 vmlinux.pre 3268765 664356 492196 4425317 438665 vmlinux So this patch reduces text size by 224 bytes on my x86_64 machine. Similar results on ia32. Signed-off-by: Eric Dumazet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pipe_fs_i.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index cc902d242c4..2e19478e9e8 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -41,7 +41,6 @@ struct pipe_buf_operations { struct pipe_inode_info { wait_queue_head_t wait; unsigned int nrbufs, curbuf; - struct pipe_buffer bufs[PIPE_BUFFERS]; struct page *tmp_page; unsigned int readers; unsigned int writers; @@ -51,6 +50,7 @@ struct pipe_inode_info { struct fasync_struct *fasync_readers; struct fasync_struct *fasync_writers; struct inode *inode; + struct pipe_buffer bufs[PIPE_BUFFERS]; }; /* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual -- cgit v1.2.3 From 2e892f43ccb602e8ffad73396a1000f2040c9e0b Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 13 Dec 2006 00:34:23 -0800 Subject: [PATCH] Cleanup slab headers / API to allow easy addition of new slab allocators This is a response to an earlier discussion on linux-mm about splitting slab.h components per allocator. Patch is against 2.6.19-git11. See http://marc.theaimsgroup.com/?l=linux-mm&m=116469577431008&w=2 This patch cleans up the slab header definitions. We define the common functions of slob and slab in slab.h and put the extra definitions needed for slab's kmalloc implementations in . In order to get a greater set of common functions we add several empty functions to slob.c and also rename slob's kmalloc to __kmalloc. Slob does not need any special definitions since we introduce a fallback case. If there is no need for a slab implementation to provide its own kmalloc mess^H^H^Hacros then we simply fall back to __kmalloc functions. That is sufficient for SLOB. Sort the function in slab.h according to their functionality. First the functions operating on struct kmem_cache * then the kmalloc related functions followed by special debug and fallback definitions. Also redo a lot of comments. Signed-off-by: Christoph Lameter ? Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slab.h | 306 +++++++++++++++++------------------------------ include/linux/slab_def.h | 100 ++++++++++++++++ 2 files changed, 210 insertions(+), 196 deletions(-) create mode 100644 include/linux/slab_def.h (limited to 'include') diff --git a/include/linux/slab.h b/include/linux/slab.h index 2271886744f..e7a9c6b4241 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -1,7 +1,9 @@ /* - * linux/include/linux/slab.h - * Written by Mark Hemment, 1996. - * (markhe@nextd.demon.co.uk) + * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk). + * + * (C) SGI 2006, Christoph Lameter + * Cleaned up and restructured to ease the addition of alternative + * implementations of SLAB allocators. */ #ifndef _LINUX_SLAB_H @@ -10,64 +12,99 @@ #ifdef __KERNEL__ #include -#include #include -#include /* kmalloc_sizes.h needs PAGE_SIZE */ -#include /* kmalloc_sizes.h needs L1_CACHE_BYTES */ -#include -/* kmem_cache_t exists for legacy reasons and is not used by code in mm */ typedef struct kmem_cache kmem_cache_t __deprecated; -/* flags to pass to kmem_cache_create(). - * The first 3 are only valid when the allocator as been build - * SLAB_DEBUG_SUPPORT. +/* + * Flags to pass to kmem_cache_create(). + * The ones marked DEBUG are only valid if CONFIG_SLAB_DEBUG is set. */ -#define SLAB_DEBUG_FREE 0x00000100UL /* Peform (expensive) checks on free */ -#define SLAB_DEBUG_INITIAL 0x00000200UL /* Call constructor (as verifier) */ -#define SLAB_RED_ZONE 0x00000400UL /* Red zone objs in a cache */ -#define SLAB_POISON 0x00000800UL /* Poison objects */ -#define SLAB_HWCACHE_ALIGN 0x00002000UL /* align objs on a h/w cache lines */ -#define SLAB_CACHE_DMA 0x00004000UL /* use GFP_DMA memory */ -#define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* force alignment */ -#define SLAB_STORE_USER 0x00010000UL /* store the last owner for bug hunting */ -#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* track pages allocated to indicate - what is reclaimable later*/ -#define SLAB_PANIC 0x00040000UL /* panic if kmem_cache_create() fails */ -#define SLAB_DESTROY_BY_RCU 0x00080000UL /* defer freeing pages to RCU */ +#define SLAB_DEBUG_FREE 0x00000100UL /* DEBUG: Perform (expensive) checks on free */ +#define SLAB_DEBUG_INITIAL 0x00000200UL /* DEBUG: Call constructor (as verifier) */ +#define SLAB_RED_ZONE 0x00000400UL /* DEBUG: Red zone objs in a cache */ +#define SLAB_POISON 0x00000800UL /* DEBUG: Poison objects */ +#define SLAB_HWCACHE_ALIGN 0x00002000UL /* Align objs on cache lines */ +#define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */ +#define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* Force alignment even if debuggin is active */ +#define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */ +#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* Objects are reclaimable */ +#define SLAB_PANIC 0x00040000UL /* Panic if kmem_cache_create() fails */ +#define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */ #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ -/* flags passed to a constructor func */ -#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* if not set, then deconstructor */ -#define SLAB_CTOR_ATOMIC 0x002UL /* tell constructor it can't sleep */ -#define SLAB_CTOR_VERIFY 0x004UL /* tell constructor it's a verify call */ +/* Flags passed to a constructor functions */ +#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* If not set, then deconstructor */ +#define SLAB_CTOR_ATOMIC 0x002UL /* Tell constructor it can't sleep */ +#define SLAB_CTOR_VERIFY 0x004UL /* Tell constructor it's a verify call */ -#ifndef CONFIG_SLOB - -/* prototypes */ -extern void __init kmem_cache_init(void); +/* + * struct kmem_cache related prototypes + */ +void __init kmem_cache_init(void); +extern int slab_is_available(void); -extern struct kmem_cache *kmem_cache_create(const char *, size_t, size_t, +struct kmem_cache *kmem_cache_create(const char *, size_t, size_t, unsigned long, void (*)(void *, struct kmem_cache *, unsigned long), void (*)(void *, struct kmem_cache *, unsigned long)); -extern void kmem_cache_destroy(struct kmem_cache *); -extern int kmem_cache_shrink(struct kmem_cache *); -extern void *kmem_cache_alloc(struct kmem_cache *, gfp_t); -extern void *kmem_cache_zalloc(struct kmem_cache *, gfp_t); -extern void kmem_cache_free(struct kmem_cache *, void *); -extern unsigned int kmem_cache_size(struct kmem_cache *); -extern const char *kmem_cache_name(struct kmem_cache *); +void kmem_cache_destroy(struct kmem_cache *); +int kmem_cache_shrink(struct kmem_cache *); +void *kmem_cache_alloc(struct kmem_cache *, gfp_t); +void *kmem_cache_zalloc(struct kmem_cache *, gfp_t); +void kmem_cache_free(struct kmem_cache *, void *); +unsigned int kmem_cache_size(struct kmem_cache *); +const char *kmem_cache_name(struct kmem_cache *); +int kmem_ptr_validate(struct kmem_cache *cachep, void *ptr); + +#ifdef CONFIG_NUMA +extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); +#else +static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep, + gfp_t flags, int node) +{ + return kmem_cache_alloc(cachep, flags); +} +#endif + +/* + * Common kmalloc functions provided by all allocators + */ +void *__kmalloc(size_t, gfp_t); +void *__kzalloc(size_t, gfp_t); +void kfree(const void *); +unsigned int ksize(const void *); + +/** + * kcalloc - allocate memory for an array. The memory is set to zero. + * @n: number of elements. + * @size: element size. + * @flags: the type of memory to allocate. + */ +static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +{ + if (n != 0 && size > ULONG_MAX / n) + return NULL; + return __kzalloc(n * size, flags); +} -/* Size description struct for general caches. */ -struct cache_sizes { - size_t cs_size; - struct kmem_cache *cs_cachep; - struct kmem_cache *cs_dmacachep; -}; -extern struct cache_sizes malloc_sizes[]; +/* + * Allocator specific definitions. These are mainly used to establish optimized + * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by selecting + * the appropriate general cache at compile time. + */ +#ifdef CONFIG_SLAB +#include +#else -extern void *__kmalloc(size_t, gfp_t); +/* + * Fallback definitions for an allocator not wanting to provide + * its own optimized kmalloc definitions (like SLOB). + */ + +#if defined(CONFIG_NUMA) || defined(CONFIG_DEBUG_SLAB) +#error "SLAB fallback definitions not usable for NUMA or Slab debug" +#endif /** * kmalloc - allocate memory @@ -114,29 +151,22 @@ extern void *__kmalloc(size_t, gfp_t); * * %__GFP_REPEAT - If allocation fails initially, try once more before failing. */ -static inline void *kmalloc(size_t size, gfp_t flags) +void *kmalloc(size_t size, gfp_t flags) { - if (__builtin_constant_p(size)) { - int i = 0; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include "kmalloc_sizes.h" -#undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } -found: - return kmem_cache_alloc((flags & GFP_DMA) ? - malloc_sizes[i].cs_dmacachep : - malloc_sizes[i].cs_cachep, flags); - } return __kmalloc(size, flags); } +/** + * kzalloc - allocate memory. The memory is set to zero. + * @size: how many bytes of memory are required. + * @flags: the type of memory to allocate (see kmalloc). + */ +void *kzalloc(size_t size, gfp_t flags) +{ + return __kzalloc(size, flags); +} +#endif + /* * kmalloc_track_caller is a special version of kmalloc that records the * calling function of the routine calling it for slab leak tracking instead @@ -145,89 +175,16 @@ found: * allocator where we care about the real place the memory allocation * request comes from. */ -#ifndef CONFIG_DEBUG_SLAB -#define kmalloc_track_caller(size, flags) \ - __kmalloc(size, flags) -#else +#ifdef CONFIG_DEBUG_SLAB extern void *__kmalloc_track_caller(size_t, gfp_t, void*); #define kmalloc_track_caller(size, flags) \ __kmalloc_track_caller(size, flags, __builtin_return_address(0)) -#endif - -extern void *__kzalloc(size_t, gfp_t); - -/** - * kzalloc - allocate memory. The memory is set to zero. - * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate (see kmalloc). - */ -static inline void *kzalloc(size_t size, gfp_t flags) -{ - if (__builtin_constant_p(size)) { - int i = 0; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include "kmalloc_sizes.h" -#undef CACHE - { - extern void __you_cannot_kzalloc_that_much(void); - __you_cannot_kzalloc_that_much(); - } -found: - return kmem_cache_zalloc((flags & GFP_DMA) ? - malloc_sizes[i].cs_dmacachep : - malloc_sizes[i].cs_cachep, flags); - } - return __kzalloc(size, flags); -} - -/** - * kcalloc - allocate memory for an array. The memory is set to zero. - * @n: number of elements. - * @size: element size. - * @flags: the type of memory to allocate. - */ -static inline void *kcalloc(size_t n, size_t size, gfp_t flags) -{ - if (n != 0 && size > ULONG_MAX / n) - return NULL; - return kzalloc(n * size, flags); -} - -extern void kfree(const void *); -extern unsigned int ksize(const void *); -extern int slab_is_available(void); +#else +#define kmalloc_track_caller(size, flags) \ + __kmalloc(size, flags) +#endif /* DEBUG_SLAB */ #ifdef CONFIG_NUMA -extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); -extern void *__kmalloc_node(size_t size, gfp_t flags, int node); - -static inline void *kmalloc_node(size_t size, gfp_t flags, int node) -{ - if (__builtin_constant_p(size)) { - int i = 0; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include "kmalloc_sizes.h" -#undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } -found: - return kmem_cache_alloc_node((flags & GFP_DMA) ? - malloc_sizes[i].cs_dmacachep : - malloc_sizes[i].cs_cachep, flags, node); - } - return __kmalloc_node(size, flags, node); -} - /* * kmalloc_node_track_caller is a special version of kmalloc_node that * records the calling function of the routine calling it for slab leak @@ -236,70 +193,27 @@ found: * standard allocator where we care about the real place the memory * allocation request comes from. */ -#ifndef CONFIG_DEBUG_SLAB -#define kmalloc_node_track_caller(size, flags, node) \ - __kmalloc_node(size, flags, node) -#else +#ifdef CONFIG_DEBUG_SLAB extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *); #define kmalloc_node_track_caller(size, flags, node) \ __kmalloc_node_track_caller(size, flags, node, \ __builtin_return_address(0)) +#else +#define kmalloc_node_track_caller(size, flags, node) \ + __kmalloc_node(size, flags, node) #endif + #else /* CONFIG_NUMA */ -static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep, - gfp_t flags, int node) -{ - return kmem_cache_alloc(cachep, flags); -} -static inline void *kmalloc_node(size_t size, gfp_t flags, int node) -{ - return kmalloc(size, flags); -} #define kmalloc_node_track_caller(size, flags, node) \ kmalloc_track_caller(size, flags) -#endif -extern int FASTCALL(kmem_cache_reap(int)); -extern int FASTCALL(kmem_ptr_validate(struct kmem_cache *cachep, void *ptr)); - -#else /* CONFIG_SLOB */ - -/* SLOB allocator routines */ - -void kmem_cache_init(void); -struct kmem_cache *kmem_cache_create(const char *c, size_t, size_t, - unsigned long, - void (*)(void *, struct kmem_cache *, unsigned long), - void (*)(void *, struct kmem_cache *, unsigned long)); -void kmem_cache_destroy(struct kmem_cache *c); -void *kmem_cache_alloc(struct kmem_cache *c, gfp_t flags); -void *kmem_cache_zalloc(struct kmem_cache *, gfp_t); -void kmem_cache_free(struct kmem_cache *c, void *b); -const char *kmem_cache_name(struct kmem_cache *); -void *kmalloc(size_t size, gfp_t flags); -void *__kzalloc(size_t size, gfp_t flags); -void kfree(const void *m); -unsigned int ksize(const void *m); -unsigned int kmem_cache_size(struct kmem_cache *c); - -static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +static inline void *kmalloc_node(size_t size, gfp_t flags, int node) { - return __kzalloc(n * size, flags); + return kmalloc(size, flags); } -#define kmem_cache_shrink(d) (0) -#define kmem_cache_reap(a) -#define kmem_ptr_validate(a, b) (0) -#define kmem_cache_alloc_node(c, f, n) kmem_cache_alloc(c, f) -#define kmalloc_node(s, f, n) kmalloc(s, f) -#define kzalloc(s, f) __kzalloc(s, f) -#define kmalloc_track_caller kmalloc - -#define kmalloc_node_track_caller kmalloc_node - -#endif /* CONFIG_SLOB */ - +#endif /* !CONFIG_NUMA */ #endif /* __KERNEL__ */ - #endif /* _LINUX_SLAB_H */ + diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h new file mode 100644 index 00000000000..4b463e66dde --- /dev/null +++ b/include/linux/slab_def.h @@ -0,0 +1,100 @@ +#ifndef _LINUX_SLAB_DEF_H +#define _LINUX_SLAB_DEF_H + +/* + * Definitions unique to the original Linux SLAB allocator. + * + * What we provide here is a way to optimize the frequent kmalloc + * calls in the kernel by selecting the appropriate general cache + * if kmalloc was called with a size that can be established at + * compile time. + */ + +#include +#include /* kmalloc_sizes.h needs PAGE_SIZE */ +#include /* kmalloc_sizes.h needs L1_CACHE_BYTES */ +#include + +/* Size description struct for general caches. */ +struct cache_sizes { + size_t cs_size; + struct kmem_cache *cs_cachep; + struct kmem_cache *cs_dmacachep; +}; +extern struct cache_sizes malloc_sizes[]; + +static inline void *kmalloc(size_t size, gfp_t flags) +{ + if (__builtin_constant_p(size)) { + int i = 0; +#define CACHE(x) \ + if (size <= x) \ + goto found; \ + else \ + i++; +#include "kmalloc_sizes.h" +#undef CACHE + { + extern void __you_cannot_kmalloc_that_much(void); + __you_cannot_kmalloc_that_much(); + } +found: + return kmem_cache_alloc((flags & GFP_DMA) ? + malloc_sizes[i].cs_dmacachep : + malloc_sizes[i].cs_cachep, flags); + } + return __kmalloc(size, flags); +} + +static inline void *kzalloc(size_t size, gfp_t flags) +{ + if (__builtin_constant_p(size)) { + int i = 0; +#define CACHE(x) \ + if (size <= x) \ + goto found; \ + else \ + i++; +#include "kmalloc_sizes.h" +#undef CACHE + { + extern void __you_cannot_kzalloc_that_much(void); + __you_cannot_kzalloc_that_much(); + } +found: + return kmem_cache_zalloc((flags & GFP_DMA) ? + malloc_sizes[i].cs_dmacachep : + malloc_sizes[i].cs_cachep, flags); + } + return __kzalloc(size, flags); +} + +#ifdef CONFIG_NUMA +extern void *__kmalloc_node(size_t size, gfp_t flags, int node); + +static inline void *kmalloc_node(size_t size, gfp_t flags, int node) +{ + if (__builtin_constant_p(size)) { + int i = 0; +#define CACHE(x) \ + if (size <= x) \ + goto found; \ + else \ + i++; +#include "kmalloc_sizes.h" +#undef CACHE + { + extern void __you_cannot_kmalloc_that_much(void); + __you_cannot_kmalloc_that_much(); + } +found: + return kmem_cache_alloc_node((flags & GFP_DMA) ? + malloc_sizes[i].cs_dmacachep : + malloc_sizes[i].cs_cachep, flags, node); + } + return __kmalloc_node(size, flags, node); +} + +#endif /* CONFIG_NUMA */ + +#endif /* _LINUX_SLAB_DEF_H */ -- cgit v1.2.3 From 55935a34a428a1497e3b37982e2782c09c6f914d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 13 Dec 2006 00:34:24 -0800 Subject: [PATCH] More slab.h cleanups More cleanups for slab.h 1. Remove tabs from weird locations as suggested by Pekka 2. Drop the check for NUMA and SLAB_DEBUG from the fallback section as suggested by Pekka. 3. Uses static inline for the fallback defs as also suggested by Pekka. 4. Make kmem_ptr_valid take a const * argument. 5. Separate the NUMA fallback definitions from the kmalloc_track fallback definitions. Signed-off-by: Christoph Lameter Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slab.h | 44 ++++++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/include/linux/slab.h b/include/linux/slab.h index e7a9c6b4241..1ef822e31c7 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -20,11 +20,11 @@ typedef struct kmem_cache kmem_cache_t __deprecated; * Flags to pass to kmem_cache_create(). * The ones marked DEBUG are only valid if CONFIG_SLAB_DEBUG is set. */ -#define SLAB_DEBUG_FREE 0x00000100UL /* DEBUG: Perform (expensive) checks on free */ -#define SLAB_DEBUG_INITIAL 0x00000200UL /* DEBUG: Call constructor (as verifier) */ -#define SLAB_RED_ZONE 0x00000400UL /* DEBUG: Red zone objs in a cache */ -#define SLAB_POISON 0x00000800UL /* DEBUG: Poison objects */ -#define SLAB_HWCACHE_ALIGN 0x00002000UL /* Align objs on cache lines */ +#define SLAB_DEBUG_FREE 0x00000100UL /* DEBUG: Perform (expensive) checks on free */ +#define SLAB_DEBUG_INITIAL 0x00000200UL /* DEBUG: Call constructor (as verifier) */ +#define SLAB_RED_ZONE 0x00000400UL /* DEBUG: Red zone objs in a cache */ +#define SLAB_POISON 0x00000800UL /* DEBUG: Poison objects */ +#define SLAB_HWCACHE_ALIGN 0x00002000UL /* Align objs on cache lines */ #define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */ #define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* Force alignment even if debuggin is active */ #define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */ @@ -34,9 +34,9 @@ typedef struct kmem_cache kmem_cache_t __deprecated; #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ /* Flags passed to a constructor functions */ -#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* If not set, then deconstructor */ +#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* If not set, then deconstructor */ #define SLAB_CTOR_ATOMIC 0x002UL /* Tell constructor it can't sleep */ -#define SLAB_CTOR_VERIFY 0x004UL /* Tell constructor it's a verify call */ +#define SLAB_CTOR_VERIFY 0x004UL /* Tell constructor it's a verify call */ /* * struct kmem_cache related prototypes @@ -55,7 +55,7 @@ void *kmem_cache_zalloc(struct kmem_cache *, gfp_t); void kmem_cache_free(struct kmem_cache *, void *); unsigned int kmem_cache_size(struct kmem_cache *); const char *kmem_cache_name(struct kmem_cache *); -int kmem_ptr_validate(struct kmem_cache *cachep, void *ptr); +int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr); #ifdef CONFIG_NUMA extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); @@ -93,19 +93,15 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags) * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by selecting * the appropriate general cache at compile time. */ + #ifdef CONFIG_SLAB #include #else - /* * Fallback definitions for an allocator not wanting to provide * its own optimized kmalloc definitions (like SLOB). */ -#if defined(CONFIG_NUMA) || defined(CONFIG_DEBUG_SLAB) -#error "SLAB fallback definitions not usable for NUMA or Slab debug" -#endif - /** * kmalloc - allocate memory * @size: how many bytes of memory are required. @@ -151,7 +147,7 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags) * * %__GFP_REPEAT - If allocation fails initially, try once more before failing. */ -void *kmalloc(size_t size, gfp_t flags) +static inline void *kmalloc(size_t size, gfp_t flags) { return __kmalloc(size, flags); } @@ -161,12 +157,24 @@ void *kmalloc(size_t size, gfp_t flags) * @size: how many bytes of memory are required. * @flags: the type of memory to allocate (see kmalloc). */ -void *kzalloc(size_t size, gfp_t flags) +static inline void *kzalloc(size_t size, gfp_t flags) { return __kzalloc(size, flags); } #endif +#ifndef CONFIG_NUMA +static inline void *kmalloc_node(size_t size, gfp_t flags, int node) +{ + return kmalloc(size, flags); +} + +static inline void *__kmalloc_node(size_t size, gfp_t flags, int node) +{ + return __kmalloc(size, flags); +} +#endif /* !CONFIG_NUMA */ + /* * kmalloc_track_caller is a special version of kmalloc that records the * calling function of the routine calling it for slab leak tracking instead @@ -208,12 +216,8 @@ extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *); #define kmalloc_node_track_caller(size, flags, node) \ kmalloc_track_caller(size, flags) -static inline void *kmalloc_node(size_t size, gfp_t flags, int node) -{ - return kmalloc(size, flags); -} +#endif /* DEBUG_SLAB */ -#endif /* !CONFIG_NUMA */ #endif /* __KERNEL__ */ #endif /* _LINUX_SLAB_H */ -- cgit v1.2.3 From 02a0e53d8227aff5e62e0433f82c12c1c2805fd6 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 13 Dec 2006 00:34:25 -0800 Subject: [PATCH] cpuset: rework cpuset_zone_allowed api Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpuset.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 8821e1f75b4..826b15e914e 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -30,10 +30,19 @@ void cpuset_update_task_memory_state(void); nodes_subset((nodes), current->mems_allowed) int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl); -extern int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask); -static int inline cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask) +extern int __cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask); +extern int __cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask); + +static int inline cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask) +{ + return number_of_cpusets <= 1 || + __cpuset_zone_allowed_softwall(z, gfp_mask); +} + +static int inline cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask) { - return number_of_cpusets <= 1 || __cpuset_zone_allowed(z, gfp_mask); + return number_of_cpusets <= 1 || + __cpuset_zone_allowed_hardwall(z, gfp_mask); } extern int cpuset_excl_nodes_overlap(const struct task_struct *p); @@ -94,7 +103,12 @@ static inline int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl) return 1; } -static inline int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask) +static inline int cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask) +{ + return 1; +} + +static inline int cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask) { return 1; } -- cgit v1.2.3 From 6a2d7a955d8de6cb19ed9cd194b3c83008a22c32 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 13 Dec 2006 00:34:27 -0800 Subject: [PATCH] SLAB: use a multiply instead of a divide in obj_to_index() When some objects are allocated by one CPU but freed by another CPU we can consume lot of cycles doing divides in obj_to_index(). (Typical load on a dual processor machine where network interrupts are handled by one particular CPU (allocating skbufs), and the other CPU is running the application (consuming and freeing skbufs)) Here on one production server (dual-core AMD Opteron 285), I noticed this divide took 1.20 % of CPU_CLK_UNHALTED events in kernel. But Opteron are quite modern cpus and the divide is much more expensive on oldest architectures : On a 200 MHz sparcv9 machine, the division takes 64 cycles instead of 1 cycle for a multiply. Doing some math, we can use a reciprocal multiplication instead of a divide. If we want to compute V = (A / B) (A and B being u32 quantities) we can instead use : V = ((u64)A * RECIPROCAL(B)) >> 32 ; where RECIPROCAL(B) is precalculated to ((1LL << 32) + (B - 1)) / B Note : I wrote pure C code for clarity. gcc output for i386 is not optimal but acceptable : mull 0x14(%ebx) mov %edx,%eax // part of the >> 32 xor %edx,%edx // useless mov %eax,(%esp) // could be avoided mov %edx,0x4(%esp) // useless mov (%esp),%ebx [akpm@osdl.org: small cleanups] Signed-off-by: Eric Dumazet Cc: Christoph Lameter Cc: David Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/reciprocal_div.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/linux/reciprocal_div.h (limited to 'include') diff --git a/include/linux/reciprocal_div.h b/include/linux/reciprocal_div.h new file mode 100644 index 00000000000..f9c90b33285 --- /dev/null +++ b/include/linux/reciprocal_div.h @@ -0,0 +1,32 @@ +#ifndef _LINUX_RECIPROCAL_DIV_H +#define _LINUX_RECIPROCAL_DIV_H + +#include + +/* + * This file describes reciprocical division. + * + * This optimizes the (A/B) problem, when A and B are two u32 + * and B is a known value (but not known at compile time) + * + * The math principle used is : + * Let RECIPROCAL_VALUE(B) be (((1LL << 32) + (B - 1))/ B) + * Then A / B = (u32)(((u64)(A) * (R)) >> 32) + * + * This replaces a divide by a multiply (and a shift), and + * is generally less expensive in CPU cycles. + */ + +/* + * Computes the reciprocal value (R) for the value B of the divisor. + * Should not be called before each reciprocal_divide(), + * or else the performance is slower than a normal divide. + */ +extern u32 reciprocal_value(u32 B); + + +static inline u32 reciprocal_divide(u32 A, u32 R) +{ + return (u32)(((u64)A * R) >> 32); +} +#endif -- cgit v1.2.3 From 8a102eed9c4e1d21bad07a8fd97bd4fbf125d966 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 13 Dec 2006 00:34:30 -0800 Subject: [PATCH] PM: Fix SMP races in the freezer Currently, to tell a task that it should go to the refrigerator, we set the PF_FREEZE flag for it and send a fake signal to it. Unfortunately there are two SMP-related problems with this approach. First, a task running on another CPU may be updating its flags while the freezer attempts to set PF_FREEZE for it and this may leave the task's flags in an inconsistent state. Second, there is a potential race between freeze_process() and refrigerator() in which freeze_process() running on one CPU is reading a task's PF_FREEZE flag while refrigerator() running on another CPU has just set PF_FROZEN for the same task and attempts to reset PF_FREEZE for it. If the refrigerator wins the race, freeze_process() will state that PF_FREEZE hasn't been set for the task and will set it unnecessarily, so the task will go to the refrigerator once again after it's been thawed. To solve first of these problems we need to stop using PF_FREEZE to tell tasks that they should go to the refrigerator. Instead, we can introduce a special TIF_*** flag and use it for this purpose, since it is allowed to change the other tasks' TIF_*** flags and there are special calls for it. To avoid the freeze_process()-refrigerator() race we can make freeze_process() to always check the task's PF_FROZEN flag after it's read its "freeze" flag. We should also make sure that refrigerator() will always reset the task's "freeze" flag after it's set PF_FROZEN for it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Cc: Russell King Cc: David Howells Cc: Andi Kleen Cc: "Luck, Tony" Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/thread_info.h | 2 ++ include/asm-frv/thread_info.h | 2 ++ include/asm-i386/thread_info.h | 2 ++ include/asm-ia64/thread_info.h | 2 ++ include/asm-powerpc/thread_info.h | 2 ++ include/asm-sh/thread_info.h | 2 ++ include/asm-x86_64/thread_info.h | 2 ++ include/linux/freezer.h | 11 ++++++----- include/linux/sched.h | 1 - 9 files changed, 20 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index d9b8bddc873..5014794f9eb 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -147,6 +147,7 @@ extern void iwmmxt_task_switch(struct thread_info *); #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 +#define TIF_FREEZE 19 #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -154,6 +155,7 @@ extern void iwmmxt_task_switch(struct thread_info *); #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) +#define _TIF_FREEZE (1 << TIF_FREEZE) /* * Change these and you break ASM code in entry-common.S diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h index d66c48e6ef1..d881f518e6a 100644 --- a/include/asm-frv/thread_info.h +++ b/include/asm-frv/thread_info.h @@ -116,6 +116,7 @@ register struct thread_info *__current_thread_info asm("gr15"); #define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_FREEZE 18 /* freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) @@ -125,6 +126,7 @@ register struct thread_info *__current_thread_info asm("gr15"); #define _TIF_IRET (1 << TIF_IRET) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ diff --git a/include/asm-i386/thread_info.h b/include/asm-i386/thread_info.h index 46d32ad9208..4b187bb377b 100644 --- a/include/asm-i386/thread_info.h +++ b/include/asm-i386/thread_info.h @@ -134,6 +134,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 16 #define TIF_DEBUG 17 /* uses debug registers */ #define TIF_IO_BITMAP 18 /* uses I/O bitmap */ +#define TIF_FREEZE 19 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<flags & PF_FREEZE; + return test_tsk_thread_flag(p, TIF_FREEZE); } /* * Request that a process be frozen - * FIXME: SMP problem. We may not modify other process' flags! */ static inline void freeze(struct task_struct *p) { - p->flags |= PF_FREEZE; + set_tsk_thread_flag(p, TIF_FREEZE); } /* @@ -33,7 +32,7 @@ static inline void freeze(struct task_struct *p) */ static inline void do_not_freeze(struct task_struct *p) { - p->flags &= ~PF_FREEZE; + clear_tsk_thread_flag(p, TIF_FREEZE); } /* @@ -54,7 +53,9 @@ static inline int thaw_process(struct task_struct *p) */ static inline void frozen_process(struct task_struct *p) { - p->flags = (p->flags & ~PF_FREEZE) | PF_FROZEN; + p->flags |= PF_FROZEN; + wmb(); + clear_tsk_thread_flag(p, TIF_FREEZE); } extern void refrigerator(void); diff --git a/include/linux/sched.h b/include/linux/sched.h index ea92e5c8908..44637353519 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1144,7 +1144,6 @@ static inline void put_task_struct(struct task_struct *t) #define PF_MEMALLOC 0x00000800 /* Allocating memory */ #define PF_FLUSHER 0x00001000 /* responsible for disk writeback */ #define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */ -#define PF_FREEZE 0x00004000 /* this task is being frozen for suspend now */ #define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */ #define PF_FROZEN 0x00010000 /* frozen for system suspend */ #define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */ -- cgit v1.2.3 From 1c0350bd0c9b59957760e67516973db35bafa050 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Wed, 13 Dec 2006 00:34:32 -0800 Subject: [PATCH] Xtensa: Add ktermios and minor filename fix The kernel termios (ktermios) changes were somehow missed for Xtensa. This patch adds the ktermios structure and also includes some minor file name fix that was missed in the syscall patch. Signed-off-by: Chris Zankel Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-xtensa/termbits.h | 11 +++++++++++ include/asm-xtensa/uaccess.h | 1 - 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-xtensa/termbits.h b/include/asm-xtensa/termbits.h index c780593ff5f..057b9a3d8f8 100644 --- a/include/asm-xtensa/termbits.h +++ b/include/asm-xtensa/termbits.h @@ -30,6 +30,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 diff --git a/include/asm-xtensa/uaccess.h b/include/asm-xtensa/uaccess.h index 88a64e1144d..d6352da05b1 100644 --- a/include/asm-xtensa/uaccess.h +++ b/include/asm-xtensa/uaccess.h @@ -23,7 +23,6 @@ #ifdef __ASSEMBLY__ -#define _ASMLANGUAGE #include #include #include -- cgit v1.2.3 From 47ae32d6a54955a041cdc30b06d0bb16e75f68d5 Mon Sep 17 00:00:00 2001 From: Valerie Henson Date: Wed, 13 Dec 2006 00:34:34 -0800 Subject: [PATCH] relative atime Add "relatime" (relative atime) support. Relative atime only updates the atime if the previous atime is older than the mtime or ctime. Like noatime, but useful for applications like mutt that need to know when a file has been read since it was last modified. A corresponding patch against mount(8) is available at http://userweb.kernel.org/~akpm/mount-relative-atime.txt Signed-off-by: Valerie Henson Cc: Mark Fasheh Cc: Al Viro Cc: Christoph Hellwig Cc: Karel Zak Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 1 + include/linux/mount.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index adce6e1d70c..186da813541 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -120,6 +120,7 @@ extern int dir_notify_enable; #define MS_PRIVATE (1<<18) /* change to private */ #define MS_SLAVE (1<<19) /* change to slave */ #define MS_SHARED (1<<20) /* change to shared */ +#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ #define MS_ACTIVE (1<<30) #define MS_NOUSER (1<<31) diff --git a/include/linux/mount.h b/include/linux/mount.h index e357dc86a4d..1b7e178b0d8 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -27,6 +27,7 @@ struct mnt_namespace; #define MNT_NOEXEC 0x04 #define MNT_NOATIME 0x08 #define MNT_NODIRATIME 0x10 +#define MNT_RELATIME 0x20 #define MNT_SHRINKABLE 0x100 -- cgit v1.2.3 From e61c90188b9956edae1105eef361d8981a352fcd Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Wed, 13 Dec 2006 00:34:36 -0800 Subject: [PATCH] optimize o_direct on block devices Implement block device specific .direct_IO method instead of going through generic direct_io_worker for block device. direct_io_worker() is fairly complex because it needs to handle O_DIRECT on file system, where it needs to perform block allocation, hole detection, extents file on write, and tons of other corner cases. The end result is that it takes tons of CPU time to submit an I/O. For block device, the block allocation is much simpler and a tight triple loop can be written to iterate each iovec and each page within the iovec in order to construct/prepare bio structure and then subsequently submit it to the block layer. This significantly speeds up O_D on block device. [akpm@osdl.org: small speedup] Signed-off-by: Ken Chen Cc: Christoph Hellwig Cc: Zach Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/aio.h | 1 + include/linux/bio.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/aio.h b/include/linux/aio.h index 3372ec6bf53..a30ef13c9e6 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -105,6 +105,7 @@ struct kiocb { wait_queue_t ki_wait; loff_t ki_pos; + atomic_t ki_bio_count; /* num bio used for this iocb */ void *private; /* State that we remember to be able to restart/retry */ unsigned short ki_opcode; diff --git a/include/linux/bio.h b/include/linux/bio.h index 092dbd0e765..08daf3272c0 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -309,6 +309,7 @@ extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int, gfp_t); extern void bio_set_pages_dirty(struct bio *bio); extern void bio_check_pages_dirty(struct bio *bio); +extern void bio_release_pages(struct bio *bio); extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int); extern int bio_uncopy_user(struct bio *); void zero_fill_bio(struct bio *bio); -- cgit v1.2.3 From 5d6f647fc6bb57377c9f417c4752e43189f56bb1 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 13 Dec 2006 00:34:36 -0800 Subject: [PATCH] debug: add sysrq_always_enabled boot option Most distributions enable sysrq support but set it to 0 by default. Add a sysrq_always_enabled boot option to always-enable sysrq keys. Useful for debugging - without having to modify the disribution's config files (which might not be possible if the kernel is on a live CD, etc.). Also, while at it, clean up the sysrq interfaces. [bunk@stusta.de: make sysrq_always_enabled_setup() static] Signed-off-by: Ingo Molnar Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sysrq.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h index 9df8833670c..98a1d8cfb73 100644 --- a/include/linux/sysrq.h +++ b/include/linux/sysrq.h @@ -37,23 +37,37 @@ struct sysrq_key_op { #ifdef CONFIG_MAGIC_SYSRQ +extern int sysrq_on(void); + +/* + * Do not use this one directly: + */ +extern int __sysrq_enabled; + /* Generic SysRq interface -- you may call it from any device driver, supplying * ASCII code of the key, pointer to registers and kbd/tty structs (if they * are available -- else NULL's). */ -void handle_sysrq(int, struct tty_struct *); -void __handle_sysrq(int, struct tty_struct *, int check_mask); -int register_sysrq_key(int, struct sysrq_key_op *); -int unregister_sysrq_key(int, struct sysrq_key_op *); +void handle_sysrq(int key, struct tty_struct *tty); +void __handle_sysrq(int key, struct tty_struct *tty, int check_mask); +int register_sysrq_key(int key, struct sysrq_key_op *op); +int unregister_sysrq_key(int key, struct sysrq_key_op *op); struct sysrq_key_op *__sysrq_get_key_op(int key); #else +static inline int sysrq_on(void) +{ + return 0; +} static inline int __reterr(void) { return -EINVAL; } +static inline void handle_sysrq(int key, struct tty_struct *tty) +{ +} #define register_sysrq_key(ig,nore) __reterr() #define unregister_sysrq_key(ig,nore) __reterr() -- cgit v1.2.3 From 3117df0453828bd045c16244e6f50e5714667a8a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 13 Dec 2006 00:34:43 -0800 Subject: [PATCH] lockdep: print irq-trace info on asserts When we print an assert due to scheduling-in-atomic bugs, and if lockdep is enabled, then the IRQ tracing information of lockdep can be printed to pinpoint the code location that disabled interrupts. This saved me quite a bit of debugging time in cases where the backtrace did not identify the irq-disabling site well enough. Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lockdep.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 498bfbd3b4e..ea097dddc44 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -281,15 +281,25 @@ struct lock_class_key { }; #if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_GENERIC_HARDIRQS) extern void early_init_irq_lock_class(void); #else -# define early_init_irq_lock_class() do { } while (0) +static inline void early_init_irq_lock_class(void) +{ +} #endif #ifdef CONFIG_TRACE_IRQFLAGS extern void early_boot_irqs_off(void); extern void early_boot_irqs_on(void); +extern void print_irqtrace_events(struct task_struct *curr); #else -# define early_boot_irqs_off() do { } while (0) -# define early_boot_irqs_on() do { } while (0) +static inline void early_boot_irqs_off(void) +{ +} +static inline void early_boot_irqs_on(void) +{ +} +static inline void print_irqtrace_events(struct task_struct *curr) +{ +} #endif /* -- cgit v1.2.3 From cd86128088554d64fea1679191509f00e6353c5b Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 13 Dec 2006 00:34:52 -0800 Subject: [PATCH] Fix numerous kcalloc() calls, convert to kzalloc() All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day Cc: Jeff Garzik Cc: Alan Cox Cc: Dominik Brodowski Cc: Adam Belay Cc: James Bottomley Cc: Greg KH Cc: Mark Fasheh Cc: Trond Myklebust Cc: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gameport.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/gameport.h b/include/linux/gameport.h index 2cdba0c2395..afad9527284 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -105,7 +105,7 @@ static inline void gameport_set_phys(struct gameport *gameport, static inline struct gameport *gameport_allocate_port(void) { - struct gameport *gameport = kcalloc(1, sizeof(struct gameport), GFP_KERNEL); + struct gameport *gameport = kzalloc(sizeof(struct gameport), GFP_KERNEL); return gameport; } -- cgit v1.2.3 From 905f3ed62515f233fea09dc5ad68bbcff4903520 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 13 Dec 2006 00:35:01 -0800 Subject: [PATCH] hci endianness annotations Signed-off-by: Al Viro Acked-by: Marcel Holtmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/net/bluetooth/hci.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 10a3eec191f..41456c14884 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -739,13 +739,13 @@ struct sockaddr_hci { struct hci_filter { unsigned long type_mask; unsigned long event_mask[2]; - __u16 opcode; + __le16 opcode; }; struct hci_ufilter { __u32 type_mask; __u32 event_mask[2]; - __u16 opcode; + __le16 opcode; }; #define HCI_FLT_TYPE_BITS 31 -- cgit v1.2.3 From e8c5c045d790e7018c56f1a998a2d240b732ea3c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 13 Dec 2006 00:35:03 -0800 Subject: [PATCH] lockd endianness annotations Annotated, all places switched to keeping status net-endian. Signed-off-by: Al Viro Acked-by: Trond Myklebust Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lockd/bind.h | 2 +- include/linux/lockd/lockd.h | 2 +- include/linux/lockd/sm_inter.h | 2 +- include/linux/lockd/xdr.h | 8 ++++---- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h index aa50d89eacd..246de1d84a2 100644 --- a/include/linux/lockd/bind.h +++ b/include/linux/lockd/bind.h @@ -23,7 +23,7 @@ struct svc_rqst; * This is the set of functions for lockd->nfsd communication */ struct nlmsvc_binding { - u32 (*fopen)(struct svc_rqst *, + __be32 (*fopen)(struct svc_rqst *, struct nfs_fh *, struct file **); void (*fclose)(struct file *); diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 0c962b82a9d..ac25b5649c5 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -191,7 +191,7 @@ __be32 nlmsvc_cancel_blocked(struct nlm_file *, struct nlm_lock *); unsigned long nlmsvc_retry_blocked(void); void nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *, nlm_host_match_fn_t match); -void nlmsvc_grant_reply(struct nlm_cookie *, u32); +void nlmsvc_grant_reply(struct nlm_cookie *, __be32); /* * File handling for the server personality diff --git a/include/linux/lockd/sm_inter.h b/include/linux/lockd/sm_inter.h index fc61d40964d..22a645828f2 100644 --- a/include/linux/lockd/sm_inter.h +++ b/include/linux/lockd/sm_inter.h @@ -24,7 +24,7 @@ * Arguments for all calls to statd */ struct nsm_args { - u32 addr; /* remote address */ + __be32 addr; /* remote address */ u32 prog; /* RPC callback info */ u32 vers; u32 proc; diff --git a/include/linux/lockd/xdr.h b/include/linux/lockd/xdr.h index 29e7d9fc9da..83a1f9f6237 100644 --- a/include/linux/lockd/xdr.h +++ b/include/linux/lockd/xdr.h @@ -69,7 +69,7 @@ typedef struct nlm_args nlm_args; */ struct nlm_res { struct nlm_cookie cookie; - u32 status; + __be32 status; struct nlm_lock lock; }; @@ -80,9 +80,9 @@ struct nlm_reboot { char * mon; int len; u32 state; - u32 addr; - u32 vers; - u32 proto; + __be32 addr; + __be32 vers; + __be32 proto; }; /* -- cgit v1.2.3 From 3cec556a84be02bcd8755422eec61f1b9bee4e2f Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 13 Dec 2006 00:35:10 -0800 Subject: [PATCH] n_r3964: Use struct pid to track user space clients Currently this driver tracks user space clients it should send signals to. In the presenct of file descriptor passing this is appears susceptible to confusion from pid wrap around issues. Replacing this with a struct pid prevents us from getting confused, and prepares for a pid namespace implementation. Signed-off-by: Eric W. Biederman Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/n_r3964.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h index db4f3776978..de24af79ebd 100644 --- a/include/linux/n_r3964.h +++ b/include/linux/n_r3964.h @@ -116,7 +116,7 @@ struct r3964_message; struct r3964_client_info { spinlock_t lock; - pid_t pid; + struct pid *pid; unsigned int sig_flags; struct r3964_client_info *next; -- cgit v1.2.3 From a71113da44063b587b5a4c2fc94c948a14f2bb43 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 13 Dec 2006 00:35:10 -0800 Subject: [PATCH] smbfs: Make conn_pid a struct pid smbfs keeps track of the user space server process in conn_pid. This converts that track to use a struct pid instead of pid_t. This keeps us safe from pid wrap around issues and prepares the way for the pid namespace. Signed-off-by: Eric W. Biederman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/smb_fs_sb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/smb_fs_sb.h b/include/linux/smb_fs_sb.h index 5b4ae2cc445..3aa97aa4277 100644 --- a/include/linux/smb_fs_sb.h +++ b/include/linux/smb_fs_sb.h @@ -55,7 +55,7 @@ struct smb_sb_info { * generation is incremented. */ unsigned int generation; - pid_t conn_pid; + struct pid *conn_pid; struct smb_conn_opt opt; wait_queue_head_t conn_wq; int conn_complete; -- cgit v1.2.3 From 2154227a2c6cf04e28576b59c684123eb0e81958 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 13 Dec 2006 00:35:11 -0800 Subject: [PATCH] ncpfs: Use struct pid to track the userspace watchdog process This patch converts the tracking of the user space watchdog process from using a pid_t to use struct pid. This makes us safe from pid wrap around issues and prepares the way for the pid namespace. Signed-off-by: Eric W. Biederman Cc: Petr Vandrovec Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ncp_mount.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/ncp_mount.h b/include/linux/ncp_mount.h index f46bddcdbd3..a2b549eb1ec 100644 --- a/include/linux/ncp_mount.h +++ b/include/linux/ncp_mount.h @@ -75,7 +75,7 @@ struct ncp_mount_data_kernel { unsigned int int_flags; /* internal flags */ #define NCP_IMOUNT_LOGGEDIN_POSSIBLE 0x0001 __kernel_uid32_t mounted_uid; /* Who may umount() this filesystem? */ - __kernel_pid_t wdog_pid; /* Who cares for our watchdog packets? */ + struct pid *wdog_pid; /* Who cares for our watchdog packets? */ unsigned int ncp_fd; /* The socket to the ncp port */ unsigned int time_out; /* How long should I wait after sending a NCP request? */ -- cgit v1.2.3 From b21a323710e77a27b2f66af901bd3640c30aba6e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 13 Dec 2006 00:35:17 -0800 Subject: [PATCH] remove the broken BLK_DEV_SWIM_IOP driver The BLK_DEV_SWIM_IOP driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk Cc: Jens Axboe Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-m68k/swim_iop.h | 221 -------------------------------------------- 1 file changed, 221 deletions(-) delete mode 100644 include/asm-m68k/swim_iop.h (limited to 'include') diff --git a/include/asm-m68k/swim_iop.h b/include/asm-m68k/swim_iop.h deleted file mode 100644 index f29b67876b0..00000000000 --- a/include/asm-m68k/swim_iop.h +++ /dev/null @@ -1,221 +0,0 @@ -/* - * SWIM access through the IOP - * Written by Joshua M. Thompson - */ - -/* IOP number and channel number for the SWIM */ - -#define SWIM_IOP IOP_NUM_ISM -#define SWIM_CHAN 1 - -/* Command code: */ - -#define CMD_INIT 0x01 /* Initialize */ -#define CMD_SHUTDOWN 0x02 /* Shutdown */ -#define CMD_START_POLL 0x03 /* Start insert/eject polling */ -#define CMD_STOP_POLL 0x04 /* Stop insert/eject polling */ -#define CMD_SETHFSTAG 0x05 /* Set HFS tag buffer address */ -#define CMD_STATUS 0x06 /* Status */ -#define CMD_EJECT 0x07 /* Eject */ -#define CMD_FORMAT 0x08 /* Format */ -#define CMD_FORMAT_VERIFY 0x09 /* Format and Verify */ -#define CMD_WRITE 0x0A /* Write */ -#define CMD_READ 0x0B /* Read */ -#define CMD_READ_VERIFY 0x0C /* Read and Verify */ -#define CMD_CACHE_CTRL 0x0D /* Cache control */ -#define CMD_TAGBUFF_CTRL 0x0E /* Tag buffer control */ -#define CMD_GET_ICON 0x0F /* Get Icon */ - -/* Drive types: */ - -/* note: apple sez DRV_FDHD is 4, but I get back a type */ -/* of 5 when I do a drive status check on my FDHD */ - -#define DRV_NONE 0 /* No drive */ -#define DRV_UNKNOWN 1 /* Unspecified drive */ -#define DRV_400K 2 /* 400K */ -#define DRV_800K 3 /* 400K/800K */ -#define DRV_FDHD 5 /* 400K/800K/720K/1440K */ -#define DRV_HD20 7 /* Apple HD20 */ - -/* Format types: */ - -#define FMT_HD20 0x0001 /* Apple HD20 */ -#define FMT_400K 0x0002 /* 400K (GCR) */ -#define FMT_800K 0x0004 /* 800K (GCR) */ -#define FMT_720K 0x0008 /* 720K (MFM) */ -#define FMT_1440K 0x0010 /* 1.44M (MFM) */ - -#define FMD_KIND_400K 1 -#define FMD_KIND_800K 2 -#define FMD_KIND_720K 3 -#define FMD_KIND_1440K 1 - -/* Icon Flags: */ - -#define ICON_MEDIA 0x01 /* Have IOP supply media icon */ -#define ICON_DRIVE 0x01 /* Have IOP supply drive icon */ - -/* Error codes: */ - -#define gcrOnMFMErr -400 /* GCR (400/800K) on HD media */ -#define verErr -84 /* verify failed */ -#define fmt2Err -83 /* can't get enough sync during format */ -#define fmt1Err -82 /* can't find sector 0 after track format */ -#define sectNFErr -81 /* can't find sector */ -#define seekErr -80 /* drive error during seek */ -#define spdAdjErr -79 /* can't set drive speed */ -#define twoSideErr -78 /* drive is single-sided */ -#define initIWMErr -77 /* error during initialization */ -#define tk0badErr -76 /* track zero is bad */ -#define cantStepErr -75 /* drive error during step */ -#define wrUnderrun -74 /* write underrun occurred */ -#define badDBtSlp -73 /* bad data bitslip marks */ -#define badDCksum -72 /* bad data checksum */ -#define noDtaMkErr -71 /* can't find data mark */ -#define badBtSlpErr -70 /* bad address bitslip marks */ -#define badCksmErr -69 /* bad address-mark checksum */ -#define dataVerErr -68 /* read-verify failed */ -#define noAdrMkErr -67 /* can't find an address mark */ -#define noNybErr -66 /* no nybbles? disk is probably degaussed */ -#define offLinErr -65 /* no disk in drive */ -#define noDriveErr -64 /* drive isn't connected */ -#define nsDrvErr -56 /* no such drive */ -#define paramErr -50 /* bad positioning information */ -#define wPrErr -44 /* write protected */ -#define openErr -23 /* already initialized */ - -#ifndef __ASSEMBLY__ - -struct swim_drvstatus { - __u16 curr_track; /* Current track number */ - __u8 write_prot; /* 0x80 if disk is write protected */ - __u8 disk_in_drive; /* 0x01 or 0x02 if a disk is in the drive */ - __u8 installed; /* 0x01 if drive installed, 0xFF if not */ - __u8 num_sides; /* 0x80 if two-sided format supported */ - __u8 two_sided; /* 0xff if two-sided format diskette */ - __u8 new_interface; /* 0x00 if old 400K drive, 0xFF if newer */ - __u16 errors; /* Disk error count */ - struct { /* 32 bits */ - __u16 reserved; - __u16 :4; - __u16 external:1; /* Drive is external */ - __u16 scsi:1; /* Drive is a SCSI drive */ - __u16 fixed:1; /* Drive has fixed media */ - __u16 secondary:1; /* Drive is secondary drive */ - __u8 type; /* Drive type */ - } info; - __u8 mfm_drive; /* 0xFF if this is an FDHD drive */ - __u8 mfm_disk; /* 0xFF if 720K/1440K (MFM) disk */ - __u8 mfm_format; /* 0x00 if 720K, 0xFF if 1440K */ - __u8 ctlr_type; /* 0x00 if IWM, 0xFF if SWIM */ - __u16 curr_format; /* Current format type */ - __u16 allowed_fmt; /* Allowed format types */ - __u32 num_blocks; /* Number of blocks on disk */ - __u8 icon_flags; /* Icon flags */ - __u8 unusued; -}; - -/* Commands issued from the host to the IOP: */ - -struct swimcmd_init { - __u8 code; /* CMD_INIT */ - __u8 unusued; - __u16 error; - __u8 drives[28]; /* drive type list */ -}; - -struct swimcmd_startpoll { - __u8 code; /* CMD_START_POLL */ - __u8 unusued; - __u16 error; -}; - -struct swimcmd_sethfstag { - __u8 code; /* CMD_SETHFSTAG */ - __u8 unusued; - __u16 error; - caddr_t tagbuf; /* HFS tag buffer address */ -}; - -struct swimcmd_status { - __u8 code; /* CMD_STATUS */ - __u8 drive_num; - __u16 error; - struct swim_drvstatus status; -}; - -struct swimcmd_eject { - __u8 code; /* CMD_EJECT */ - __u8 drive_num; - __u16 error; - struct swim_drvstatus status; -}; - -struct swimcmd_format { - __u8 code; /* CMD_FORMAT */ - __u8 drive_num; - __u16 error; - union { - struct { - __u16 fmt; /* format kind */ - __u8 hdrbyte; /* fmt byte for hdr (0=default) */ - __u8 interleave; /* interleave (0 = default) */ - caddr_t databuf; /* sector data buff (0=default */ - caddr_t tagbuf; /* tag data buffer (0=default) */ - } f; - struct swim_drvstatus status; - } p; -}; - -struct swimcmd_fmtverify { - __u8 code; /* CMD_FORMAT_VERIFY */ - __u8 drive_num; - __u16 error; -}; - -struct swimcmd_rw { - __u8 code; /* CMD_READ, CMD_WRITE or CMD_READ_VERIFY */ - __u8 drive_num; - __u16 error; - caddr_t buffer; /* R/W buffer address */ - __u32 first_block; /* Starting block */ - __u32 num_blocks; /* Number of blocks */ - __u8 tag[12]; /* tag data */ -}; - -struct swimcmd_cachectl { - __u8 code; /* CMD_CACHE_CTRL */ - __u8 unused; - __u16 error; - __u8 enable; /* Nonzero to enable cache */ - __u8 install; /* +1 = install, -1 = remove, 0 = neither */ -}; - -struct swimcmd_tagbufctl { - __u8 code; /* CMD_TAGBUFF_CTRL */ - __u8 unused; - __u16 error; - caddr_t buf; /* buffer address or 0 to disable */ -}; - -struct swimcmd_geticon { - __u8 code; /* CMD_GET_ICON */ - __u8 drive_num; - __u16 error; - caddr_t buffer; /* Nuffer address */ - __u16 kind; /* 0 = media icon, 1 = drive icon */ - __u16 unused; - __u16 max_bytes; /* maximum byte count */ -}; - -/* Messages from the SWIM IOP to the host CPU: */ - -struct swimmsg_status { - __u8 code; /* 1 = insert, 2 = eject, 3 = status changed */ - __u8 drive_num; - __u16 error; - struct swim_drvstatus status; -}; - -#endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From e57101991156aaba97c630f38e880f0d4012edcd Mon Sep 17 00:00:00 2001 From: "J.Bruce Fields" Date: Wed, 13 Dec 2006 00:35:20 -0800 Subject: [PATCH] knfsd: nfsd4: clarify units of COMPOUND_SLACK_SPACE A comment here incorrectly states that "slack_space" is measured in words, not bytes. Remove the comment, and adjust a variable name and a few comments to clarify the situation. This is pure cleanup; there should be no change in functionality. Signed-off-by: J. Bruce Fields Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfsd/nfsd.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index edb54c3171b..0727774772b 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -275,12 +275,12 @@ static inline int is_fsid(struct svc_fh *fh, struct knfsd_fh *reffh) * we might process an operation with side effects, and be unable to * tell the client that the operation succeeded. * - * COMPOUND_SLACK_SPACE - this is the minimum amount of buffer space + * COMPOUND_SLACK_SPACE - this is the minimum bytes of buffer space * needed to encode an "ordinary" _successful_ operation. (GETATTR, * READ, READDIR, and READLINK have their own buffer checks.) if we * fall below this level, we fail the next operation with NFS4ERR_RESOURCE. * - * COMPOUND_ERR_SLACK_SPACE - this is the minimum amount of buffer space + * COMPOUND_ERR_SLACK_SPACE - this is the minimum bytes of buffer space * needed to encode an operation which has failed with NFS4ERR_RESOURCE. * care is taken to ensure that we never fall below this level for any * reason. -- cgit v1.2.3 From ca3643171bc6e08b7c4d1f9a2ce659541a01a7fe Mon Sep 17 00:00:00 2001 From: "J.Bruce Fields" Date: Wed, 13 Dec 2006 00:35:27 -0800 Subject: [PATCH] knfsd: nfsd4: pass saved and current fh together into nfsd4 operations Pass the saved and current filehandles together into all the nfsd4 compound operations. I want a unified interface to these operations so we can just call them by pointer and throw out the huge switch statement. Also I'll eventually want a structure like this--that holds the state used during compound processing--for deferral. Signed-off-by: J. Bruce Fields Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfsd/xdr4.h | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h index 45ca01b5f84..594b8ca6975 100644 --- a/include/linux/nfsd/xdr4.h +++ b/include/linux/nfsd/xdr4.h @@ -44,6 +44,11 @@ #define NFSD4_MAX_TAGLEN 128 #define XDR_LEN(n) (((n) + 3) & ~3) +struct nfsd4_compound_state { + struct svc_fh current_fh; + struct svc_fh save_fh; +}; + struct nfsd4_change_info { u32 atomic; u32 before_ctime_sec; @@ -437,20 +442,23 @@ extern __be32 nfsd4_process_open1(struct nfsd4_open *open); extern __be32 nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_open *open); extern __be32 nfsd4_open_confirm(struct svc_rqst *rqstp, - struct svc_fh *current_fh, struct nfsd4_open_confirm *oc, + struct nfsd4_compound_state *, struct nfsd4_open_confirm *oc, struct nfs4_stateowner **); -extern __be32 nfsd4_close(struct svc_rqst *rqstp, struct svc_fh *current_fh, +extern __be32 nfsd4_close(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_close *close, struct nfs4_stateowner **replay_owner); extern __be32 nfsd4_open_downgrade(struct svc_rqst *rqstp, - struct svc_fh *current_fh, struct nfsd4_open_downgrade *od, + struct nfsd4_compound_state *, struct nfsd4_open_downgrade *od, struct nfs4_stateowner **replay_owner); -extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct svc_fh *current_fh, +extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *, struct nfsd4_lock *lock, struct nfs4_stateowner **replay_owner); -extern __be32 nfsd4_lockt(struct svc_rqst *rqstp, struct svc_fh *current_fh, +extern __be32 nfsd4_lockt(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_lockt *lockt); -extern __be32 nfsd4_locku(struct svc_rqst *rqstp, struct svc_fh *current_fh, +extern __be32 nfsd4_locku(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_locku *locku, struct nfs4_stateowner **replay_owner); extern __be32 @@ -458,7 +466,7 @@ nfsd4_release_lockowner(struct svc_rqst *rqstp, struct nfsd4_release_lockowner *rlockowner); extern void nfsd4_release_compoundargs(struct nfsd4_compoundargs *); extern __be32 nfsd4_delegreturn(struct svc_rqst *rqstp, - struct svc_fh *current_fh, struct nfsd4_delegreturn *dr); + struct nfsd4_compound_state *, struct nfsd4_delegreturn *dr); #endif /* -- cgit v1.2.3 From a4f1706a9bd94d0e33e853a7e9f40b2650d54fbf Mon Sep 17 00:00:00 2001 From: "J.Bruce Fields" Date: Wed, 13 Dec 2006 00:35:28 -0800 Subject: [PATCH] knfsd: nfsd4: move replay_owner to cstate Tuck away the replay_owner in the cstate while we're at it. Signed-off-by: J. Bruce Fields Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfsd/xdr4.h | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h index 594b8ca6975..4e5cd05ea37 100644 --- a/include/linux/nfsd/xdr4.h +++ b/include/linux/nfsd/xdr4.h @@ -47,6 +47,7 @@ struct nfsd4_compound_state { struct svc_fh current_fh; struct svc_fh save_fh; + struct nfs4_stateowner *replay_owner; }; struct nfsd4_change_info { @@ -442,25 +443,21 @@ extern __be32 nfsd4_process_open1(struct nfsd4_open *open); extern __be32 nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_open *open); extern __be32 nfsd4_open_confirm(struct svc_rqst *rqstp, - struct nfsd4_compound_state *, struct nfsd4_open_confirm *oc, - struct nfs4_stateowner **); + struct nfsd4_compound_state *, struct nfsd4_open_confirm *oc); extern __be32 nfsd4_close(struct svc_rqst *rqstp, struct nfsd4_compound_state *, - struct nfsd4_close *close, - struct nfs4_stateowner **replay_owner); + struct nfsd4_close *close); extern __be32 nfsd4_open_downgrade(struct svc_rqst *rqstp, - struct nfsd4_compound_state *, struct nfsd4_open_downgrade *od, - struct nfs4_stateowner **replay_owner); + struct nfsd4_compound_state *, + struct nfsd4_open_downgrade *od); extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *, - struct nfsd4_lock *lock, - struct nfs4_stateowner **replay_owner); + struct nfsd4_lock *lock); extern __be32 nfsd4_lockt(struct svc_rqst *rqstp, struct nfsd4_compound_state *, struct nfsd4_lockt *lockt); extern __be32 nfsd4_locku(struct svc_rqst *rqstp, struct nfsd4_compound_state *, - struct nfsd4_locku *locku, - struct nfs4_stateowner **replay_owner); + struct nfsd4_locku *locku); extern __be32 nfsd4_release_lockowner(struct svc_rqst *rqstp, struct nfsd4_release_lockowner *rlockowner); -- cgit v1.2.3 From b591480bbe1a7f0e90533bce8ea86efecc84648e Mon Sep 17 00:00:00 2001 From: "J.Bruce Fields" Date: Wed, 13 Dec 2006 00:35:38 -0800 Subject: [PATCH] knfsd: nfsd4: reorganize compound ops Define an op descriptor struct, use it to simplify nfsd4_proc_compound(). Signed-off-by: J. Bruce Fields Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfsd/state.h | 1 - include/linux/nfsd/xdr4.h | 5 +++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index c3673f487e8..ab5c236bd9a 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -273,7 +273,6 @@ struct nfs4_stateid { ((err) != nfserr_stale_stateid) && \ ((err) != nfserr_bad_stateid)) -extern __be32 nfsd4_renew(clientid_t *clid); extern __be32 nfs4_preprocess_stateid_op(struct svc_fh *current_fh, stateid_t *stateid, int flags, struct file **filp); extern void nfs4_lock_state(void); diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h index 4e5cd05ea37..09799bcee0a 100644 --- a/include/linux/nfsd/xdr4.h +++ b/include/linux/nfsd/xdr4.h @@ -436,8 +436,10 @@ __be32 nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, __be32 *buffer, int *countp, u32 *bmval, struct svc_rqst *); extern __be32 nfsd4_setclientid(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_setclientid *setclid); extern __be32 nfsd4_setclientid_confirm(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_setclientid_confirm *setclientid_confirm); extern __be32 nfsd4_process_open1(struct nfsd4_open *open); extern __be32 nfsd4_process_open2(struct svc_rqst *rqstp, @@ -460,10 +462,13 @@ extern __be32 nfsd4_locku(struct svc_rqst *rqstp, struct nfsd4_locku *locku); extern __be32 nfsd4_release_lockowner(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_release_lockowner *rlockowner); extern void nfsd4_release_compoundargs(struct nfsd4_compoundargs *); extern __be32 nfsd4_delegreturn(struct svc_rqst *rqstp, struct nfsd4_compound_state *, struct nfsd4_delegreturn *dr); +extern __be32 nfsd4_renew(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, clientid_t *clid); #endif /* -- cgit v1.2.3 From 3161986224a3faa8ccca3e665b7404d81e7ee3cf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Dec 2006 00:35:54 -0800 Subject: [PATCH] fbdev: remove references to non-existent fbmon_valid_timings() Remove references to non-existent fbmon_valid_timings() Signed-off-by: Geert Uytterhoeven Cc: James Simmons Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fb.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/fb.h b/include/linux/fb.h index 6fe56aaa668..64177ec9a01 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -929,8 +929,6 @@ extern void fb_bl_default_curve(struct fb_info *fb_info, u8 off, u8 min, u8 max) #define FB_MODE_IS_FIRST 16 #define FB_MODE_IS_FROM_VAR 32 -extern int fbmon_valid_timings(u_int pixclock, u_int htotal, u_int vtotal, - const struct fb_info *fb_info); extern int fbmon_dpms(const struct fb_info *fb_info); extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_info *info); -- cgit v1.2.3 From 0743b86800cf1dfbf96df4a438938127bbe4476c Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 13 Dec 2006 00:35:55 -0800 Subject: [PATCH] sstfb: add sysfs interface Modify the sstfb (Voodoo1/2) driver: - fix a memleak when removing the sstfb module - fix sstfb to use the fbdev default videomode database - add module option "mode_option" to set initial screen mode - add sysfs-interface to turn VGA-passthrough on/off via /sys/class/graphics/fbX/vgapass - remove old debug functions from ioctl interface Signed-off-by: Helge Deller Acked-By: James Simmons Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/video/sstfb.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/video/sstfb.h b/include/video/sstfb.h index 5dbf5e7e50a..baa163f770a 100644 --- a/include/video/sstfb.h +++ b/include/video/sstfb.h @@ -119,7 +119,7 @@ #define BACKPORCH 0x0208 #define VIDEODIMENSIONS 0x020c #define FBIINIT0 0x0210 /* misc+fifo controls */ -# define EN_VGA_PASSTHROUGH BIT(0) +# define DIS_VGA_PASSTHROUGH BIT(0) # define FBI_RESET BIT(1) # define FIFO_RESET BIT(2) #define FBIINIT1 0x0214 /* PCI + video controls */ @@ -251,7 +251,7 @@ # define DACREG_ICS_CLK1_A 0 /* bit4 */ /* sst default init registers */ -#define FBIINIT0_DEFAULT EN_VGA_PASSTHROUGH +#define FBIINIT0_DEFAULT DIS_VGA_PASSTHROUGH #define FBIINIT1_DEFAULT \ ( \ @@ -296,6 +296,11 @@ * */ +/* ioctl to enable/disable VGA passthrough */ +#define SSTFB_SET_VGAPASS _IOW('F', 0xdd, __u32) +#define SSTFB_GET_VGAPASS _IOR('F', 0xdd, __u32) + + /* used to know witch clock to set */ enum { VID_CLOCK=0, @@ -317,7 +322,7 @@ struct pll_timing { }; struct dac_switch { - char * name; + const char *name; int (*detect) (struct fb_info *info); int (*set_pll) (struct fb_info *info, const struct pll_timing *t, const int clock); void (*set_vidmod) (struct fb_info *info, const int bpp); @@ -345,7 +350,7 @@ struct sstfb_par { struct pci_dev *dev; int type; u8 revision; - int gfx_clock; /* status */ + u8 vgapass; /* VGA pass through: 1=enabled, 0=disabled */ }; #endif /* _SSTFB_H_ */ -- cgit v1.2.3 From 5cbded585d129d0226cb48ac4202b253c781be26 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 13 Dec 2006 00:35:56 -0800 Subject: [PATCH] getting rid of all casts of k[cmz]alloc() calls Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King , Ian Molton Cc: Mikael Starvik Cc: Yoshinori Sato Cc: Roman Zippel Cc: Geert Uytterhoeven Cc: Ralf Baechle Cc: Paul Mackerras Cc: Kyle McMartin Cc: Benjamin Herrenschmidt Cc: Martin Schwidefsky Cc: "David S. Miller" Cc: Jeff Dike Cc: Greg KH Cc: Jens Axboe Cc: Paul Fulghum Cc: Alan Cox Cc: Karsten Keil Cc: Mauro Carvalho Chehab Cc: Jeff Garzik Cc: James Bottomley Cc: Ian Kent Cc: Steven French Cc: David Woodhouse Cc: Neil Brown Cc: Jaroslav Kysela Cc: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-avr32/pgalloc.h | 2 +- include/asm-sh64/pgalloc.h | 2 +- include/linux/coda_linux.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h index 7492cfb92ce..bb82e70cde8 100644 --- a/include/asm-avr32/pgalloc.h +++ b/include/asm-avr32/pgalloc.h @@ -28,7 +28,7 @@ static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm) { unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t)); - pgd_t *pgd = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL); + pgd_t *pgd = kmalloc(pgd_size, GFP_KERNEL); if (pgd) memset(pgd, 0, pgd_size); diff --git a/include/asm-sh64/pgalloc.h b/include/asm-sh64/pgalloc.h index b29dd468817..cb803e56cb6 100644 --- a/include/asm-sh64/pgalloc.h +++ b/include/asm-sh64/pgalloc.h @@ -41,7 +41,7 @@ static inline void pgd_init(unsigned long page) static inline pgd_t *get_pgd_slow(void) { unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t)); - pgd_t *ret = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL); + pgd_t *ret = kmalloc(pgd_size, GFP_KERNEL); return ret; } diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h index be512cc9879..4c2632a8d31 100644 --- a/include/linux/coda_linux.h +++ b/include/linux/coda_linux.h @@ -64,7 +64,7 @@ void coda_sysctl_clean(void); #define CODA_ALLOC(ptr, cast, size) do { \ if (size < PAGE_SIZE) \ - ptr = (cast)kmalloc((unsigned long) size, GFP_KERNEL); \ + ptr = kmalloc((unsigned long) size, GFP_KERNEL); \ else \ ptr = (cast)vmalloc((unsigned long) size); \ if (!ptr) \ -- cgit v1.2.3 From 77fff4ae2b7bba6d66a8287d9ab948e2b6c16145 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 12 Dec 2006 17:14:54 +0000 Subject: [PATCH] Fix COW D-cache aliasing on fork Problem: 1. There is a process containing two thread (T1 and T2). The thread T1 calls fork(). Then dup_mmap() function called on T1 context. static inline int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm) ... flush_cache_mm(current->mm); ... /* A */ (write-protect all Copy-On-Write pages) ... /* B */ flush_tlb_mm(current->mm); ... 2. When preemption happens between A and B (or on SMP kernel), the thread T2 can run and modify data on COW pages without page fault (modified data will stay in cache). 3. Some time after fork() completed, the thread T2 may cause a page fault by write-protect on a COW page. 4. Then data of the COW page will be copied to newly allocated physical page (copy_cow_page()). It reads data via kernel mapping. The kernel mapping can have different 'color' with user space mapping of the thread T2 (dcache aliasing). Therefore copy_cow_page() will copy stale data. Then the modified data in cache will be lost. In order to allow architecture code to deal with this problem allow architecture code to override copy_user_highpage() by defining __HAVE_ARCH_COPY_USER_HIGHPAGE in . The main part of this patch was originally written by Ralf Baechle; Atushi Nemoto did the the debugging. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/linux/highmem.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 3d8768b619e..ea5780b518e 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -96,6 +96,8 @@ static inline void memclear_highpage_flush(struct page *page, unsigned int offse kunmap_atomic(kaddr, KM_USER0); } +#ifndef __HAVE_ARCH_COPY_USER_HIGHPAGE + static inline void copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr) { char *vfrom, *vto; @@ -109,6 +111,8 @@ static inline void copy_user_highpage(struct page *to, struct page *from, unsign smp_wmb(); } +#endif + static inline void copy_highpage(struct page *to, struct page *from) { char *vfrom, *vto; -- cgit v1.2.3 From 9de455b20705f36384a711d4a20bcf7ba1ab180b Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 12 Dec 2006 17:14:55 +0000 Subject: [PATCH] Pass vma argument to copy_user_highpage(). To allow a more effective copy_user_highpage() on certain architectures, a vma argument is added to the function and cow_user_page() allowing the implementation of these functions to check for the VM_EXEC bit. The main part of this patch was originally written by Ralf Baechle; Atushi Nemoto did the the debugging. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/linux/highmem.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/highmem.h b/include/linux/highmem.h index ea5780b518e..ca9a602cffd 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -98,7 +98,8 @@ static inline void memclear_highpage_flush(struct page *page, unsigned int offse #ifndef __HAVE_ARCH_COPY_USER_HIGHPAGE -static inline void copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr) +static inline void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma) { char *vfrom, *vto; -- cgit v1.2.3 From bcd022801ee514e28c32837f0b3ce18c775f1a7b Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 12 Dec 2006 17:14:56 +0000 Subject: [PATCH] MIPS: Fix COW D-cache aliasing on fork Provide a custom copy_user_highpage() to deal with aliasing issues on MIPS. It uses kmap_coherent() to map an user page for kernel with same color. Rewrite copy_to_user_page() and copy_from_user_page() with the new interfaces to avoid extra cache flushing. The main part of this patch was originally written by Ralf Baechle; Atushi Nemoto did the the debugging. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/asm-mips/page.h | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index 0dc1a45c27e..2f9e1a9ec51 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -35,7 +35,6 @@ #ifndef __ASSEMBLY__ #include -#include #include extern void clear_page(void * page); @@ -61,16 +60,13 @@ static inline void clear_user_page(void *addr, unsigned long vaddr, flush_data_cache_page((unsigned long)addr); } -static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, - struct page *to) -{ - extern void (*flush_data_cache_page)(unsigned long addr); +extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, + struct page *to); +struct vm_area_struct; +extern void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); - copy_page(vto, vfrom); - if (!cpu_has_ic_fills_f_dc || - pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) - flush_data_cache_page((unsigned long)vto); -} +#define __HAVE_ARCH_COPY_USER_HIGHPAGE /* * These are used to make use of C type-checking.. -- cgit v1.2.3 From ec8c0446b6e2b67b5c8813eb517f4bf00efa99a9 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 12 Dec 2006 17:14:57 +0000 Subject: [PATCH] Optimize D-cache alias handling on fork Virtually index, physically tagged cache architectures can get away without cache flushing when forking. This patch adds a new cache flushing function flush_cache_dup_mm(struct mm_struct *) which for the moment I've implemented to do the same thing on all architectures except on MIPS where it's a no-op. Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/asm-alpha/cacheflush.h | 1 + include/asm-arm/cacheflush.h | 2 ++ include/asm-arm26/cacheflush.h | 1 + include/asm-avr32/cacheflush.h | 1 + include/asm-cris/cacheflush.h | 1 + include/asm-frv/cacheflush.h | 1 + include/asm-h8300/cacheflush.h | 1 + include/asm-i386/cacheflush.h | 1 + include/asm-ia64/cacheflush.h | 1 + include/asm-m32r/cacheflush.h | 3 +++ include/asm-m68k/cacheflush.h | 2 ++ include/asm-m68knommu/cacheflush.h | 1 + include/asm-mips/cacheflush.h | 2 ++ include/asm-parisc/cacheflush.h | 2 ++ include/asm-powerpc/cacheflush.h | 1 + include/asm-s390/cacheflush.h | 1 + include/asm-sh/cpu-sh2/cacheflush.h | 2 ++ include/asm-sh/cpu-sh3/cacheflush.h | 3 +++ include/asm-sh/cpu-sh4/cacheflush.h | 1 + include/asm-sh64/cacheflush.h | 2 ++ include/asm-sparc/cacheflush.h | 1 + include/asm-sparc64/cacheflush.h | 1 + include/asm-v850/cacheflush.h | 1 + include/asm-x86_64/cacheflush.h | 1 + include/asm-xtensa/cacheflush.h | 2 ++ 25 files changed, 36 insertions(+) (limited to 'include') diff --git a/include/asm-alpha/cacheflush.h b/include/asm-alpha/cacheflush.h index 805640b4107..b686cc7fc44 100644 --- a/include/asm-alpha/cacheflush.h +++ b/include/asm-alpha/cacheflush.h @@ -6,6 +6,7 @@ /* Caches aren't brain-dead on the Alpha. */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index f0845646aac..378a3a2ce8d 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -319,6 +319,8 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, unsigned long len, int write); #endif +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + /* * flush_cache_user_range is used when we want to ensure that the * Harvard caches are synchronised for the user space address range. diff --git a/include/asm-arm26/cacheflush.h b/include/asm-arm26/cacheflush.h index 9c1b9c7f2eb..14ae15b6faa 100644 --- a/include/asm-arm26/cacheflush.h +++ b/include/asm-arm26/cacheflush.h @@ -22,6 +22,7 @@ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma,start,end) do { } while (0) #define flush_cache_page(vma,vmaddr,pfn) do { } while (0) #define flush_cache_vmap(start, end) do { } while (0) diff --git a/include/asm-avr32/cacheflush.h b/include/asm-avr32/cacheflush.h index f1bf1708980..dfaaa88cd41 100644 --- a/include/asm-avr32/cacheflush.h +++ b/include/asm-avr32/cacheflush.h @@ -87,6 +87,7 @@ void invalidate_icache_region(void *start, size_t len); */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_cache_vmap(start, end) do { } while (0) diff --git a/include/asm-cris/cacheflush.h b/include/asm-cris/cacheflush.h index 72cc71dffe7..01af2de27c5 100644 --- a/include/asm-cris/cacheflush.h +++ b/include/asm-cris/cacheflush.h @@ -9,6 +9,7 @@ */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-frv/cacheflush.h b/include/asm-frv/cacheflush.h index eaa5826bc1c..02500405a6f 100644 --- a/include/asm-frv/cacheflush.h +++ b/include/asm-frv/cacheflush.h @@ -20,6 +20,7 @@ */ #define flush_cache_all() do {} while(0) #define flush_cache_mm(mm) do {} while(0) +#define flush_cache_dup_mm(mm) do {} while(0) #define flush_cache_range(mm, start, end) do {} while(0) #define flush_cache_page(vma, vmaddr, pfn) do {} while(0) #define flush_cache_vmap(start, end) do {} while(0) diff --git a/include/asm-h8300/cacheflush.h b/include/asm-h8300/cacheflush.h index 1e4d95bb5ec..71210d141b6 100644 --- a/include/asm-h8300/cacheflush.h +++ b/include/asm-h8300/cacheflush.h @@ -12,6 +12,7 @@ #define flush_cache_all() #define flush_cache_mm(mm) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma,a,b) #define flush_cache_page(vma,p,pfn) #define flush_dcache_page(page) diff --git a/include/asm-i386/cacheflush.h b/include/asm-i386/cacheflush.h index 7199f7b326f..74e03c8f2e5 100644 --- a/include/asm-i386/cacheflush.h +++ b/include/asm-i386/cacheflush.h @@ -7,6 +7,7 @@ /* Caches aren't brain-dead on the intel. */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-ia64/cacheflush.h b/include/asm-ia64/cacheflush.h index f2dacb4245e..4906916d715 100644 --- a/include/asm-ia64/cacheflush.h +++ b/include/asm-ia64/cacheflush.h @@ -18,6 +18,7 @@ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_icache_page(vma,page) do { } while (0) diff --git a/include/asm-m32r/cacheflush.h b/include/asm-m32r/cacheflush.h index 8b261b49149..56961a9511b 100644 --- a/include/asm-m32r/cacheflush.h +++ b/include/asm-m32r/cacheflush.h @@ -9,6 +9,7 @@ extern void _flush_cache_copyback_all(void); #if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) @@ -29,6 +30,7 @@ extern void smp_flush_cache_all(void); #elif defined(CONFIG_CHIP_M32102) #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) @@ -41,6 +43,7 @@ extern void smp_flush_cache_all(void); #else #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-m68k/cacheflush.h b/include/asm-m68k/cacheflush.h index 24d3ff44913..16bf375fdbe 100644 --- a/include/asm-m68k/cacheflush.h +++ b/include/asm-m68k/cacheflush.h @@ -89,6 +89,8 @@ static inline void flush_cache_mm(struct mm_struct *mm) __flush_cache_030(); } +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + /* flush_cache_range/flush_cache_page must be macros to avoid a dependency on linux/mm.h, which includes this file... */ static inline void flush_cache_range(struct vm_area_struct *vma, diff --git a/include/asm-m68knommu/cacheflush.h b/include/asm-m68knommu/cacheflush.h index c3aadf3b0d8..163dcb1a968 100644 --- a/include/asm-m68knommu/cacheflush.h +++ b/include/asm-m68knommu/cacheflush.h @@ -8,6 +8,7 @@ #define flush_cache_all() __flush_cache_all() #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) __flush_cache_all() #define flush_cache_page(vma, vmaddr) do { } while (0) #define flush_dcache_range(start,len) __flush_cache_all() diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h index e3c9925876a..0ddada3bb0b 100644 --- a/include/asm-mips/cacheflush.h +++ b/include/asm-mips/cacheflush.h @@ -17,6 +17,7 @@ * * - flush_cache_all() flushes entire cache * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking * - flush_cache_page(mm, vmaddr, pfn) flushes a single page * - flush_cache_range(vma, start, end) flushes a range of pages * - flush_icache_range(start, end) flush a range of instructions @@ -31,6 +32,7 @@ extern void (*flush_cache_all)(void); extern void (*__flush_cache_all)(void); extern void (*flush_cache_mm)(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) extern void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start, unsigned long end); extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h index 2bc41f2e027..aedb0512cb0 100644 --- a/include/asm-parisc/cacheflush.h +++ b/include/asm-parisc/cacheflush.h @@ -15,6 +15,8 @@ #define flush_cache_mm(mm) flush_cache_all_local() #endif +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + #define flush_kernel_dcache_range(start,size) \ flush_kernel_dcache_range_asm((start), (start)+(size)); diff --git a/include/asm-powerpc/cacheflush.h b/include/asm-powerpc/cacheflush.h index 8a740c88d93..08e93e78921 100644 --- a/include/asm-powerpc/cacheflush.h +++ b/include/asm-powerpc/cacheflush.h @@ -18,6 +18,7 @@ */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_icache_page(vma, page) do { } while (0) diff --git a/include/asm-s390/cacheflush.h b/include/asm-s390/cacheflush.h index e399a8ba2ed..f7cade8083f 100644 --- a/include/asm-s390/cacheflush.h +++ b/include/asm-s390/cacheflush.h @@ -7,6 +7,7 @@ /* Caches aren't brain-dead on the s390. */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/include/asm-sh/cpu-sh2/cacheflush.h index f556fa80ea9..2979efb26de 100644 --- a/include/asm-sh/cpu-sh2/cacheflush.h +++ b/include/asm-sh/cpu-sh2/cacheflush.h @@ -15,6 +15,7 @@ * * - flush_cache_all() flushes entire cache * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking * - flush_cache_page(mm, vmaddr, pfn) flushes a single page * - flush_cache_range(vma, start, end) flushes a range of pages * @@ -27,6 +28,7 @@ */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h index 03fde97a7fd..f70d8ef76a1 100644 --- a/include/asm-sh/cpu-sh3/cacheflush.h +++ b/include/asm-sh/cpu-sh3/cacheflush.h @@ -15,6 +15,7 @@ * * - flush_cache_all() flushes entire cache * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking * - flush_cache_page(mm, vmaddr, pfn) flushes a single page * - flush_cache_range(vma, start, end) flushes a range of pages * @@ -39,6 +40,7 @@ void flush_cache_all(void); void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); @@ -48,6 +50,7 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page); #else #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h index 515fd574267..b01a10f3122 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/include/asm-sh/cpu-sh4/cacheflush.h @@ -18,6 +18,7 @@ */ void flush_cache_all(void); void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, diff --git a/include/asm-sh64/cacheflush.h b/include/asm-sh64/cacheflush.h index 55f71aa0aa6..1e53a47bdc9 100644 --- a/include/asm-sh64/cacheflush.h +++ b/include/asm-sh64/cacheflush.h @@ -21,6 +21,8 @@ extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h index fc632f811cd..68ac1091027 100644 --- a/include/asm-sparc/cacheflush.h +++ b/include/asm-sparc/cacheflush.h @@ -48,6 +48,7 @@ BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long) #define flush_cache_all() BTFIXUP_CALL(flush_cache_all)() #define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm) +#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm) #define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end) #define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr) #define flush_icache_range(start, end) do { } while (0) diff --git a/include/asm-sparc64/cacheflush.h b/include/asm-sparc64/cacheflush.h index 745d1ab6037..122e4058dd9 100644 --- a/include/asm-sparc64/cacheflush.h +++ b/include/asm-sparc64/cacheflush.h @@ -12,6 +12,7 @@ /* These are the same regardless of whether this is an SMP kernel or not. */ #define flush_cache_mm(__mm) \ do { if ((__mm) == current->mm) flushw_user(); } while(0) +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) #define flush_cache_range(vma, start, end) \ flush_cache_mm((vma)->vm_mm) #define flush_cache_page(vma, page, pfn) \ diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h index e1a87f82f1a..9ece05a202e 100644 --- a/include/asm-v850/cacheflush.h +++ b/include/asm-v850/cacheflush.h @@ -24,6 +24,7 @@ systems with MMUs, so we don't need them. */ #define flush_cache_all() ((void)0) #define flush_cache_mm(mm) ((void)0) +#define flush_cache_dup_mm(mm) ((void)0) #define flush_cache_range(vma, start, end) ((void)0) #define flush_cache_page(vma, vmaddr, pfn) ((void)0) #define flush_dcache_page(page) ((void)0) diff --git a/include/asm-x86_64/cacheflush.h b/include/asm-x86_64/cacheflush.h index d32f7f58752..ab1cb5c7dc9 100644 --- a/include/asm-x86_64/cacheflush.h +++ b/include/asm-x86_64/cacheflush.h @@ -7,6 +7,7 @@ /* Caches aren't brain-dead on the intel. */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) diff --git a/include/asm-xtensa/cacheflush.h b/include/asm-xtensa/cacheflush.h index 337765b629d..22ef901b784 100644 --- a/include/asm-xtensa/cacheflush.h +++ b/include/asm-xtensa/cacheflush.h @@ -75,6 +75,7 @@ extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); #define flush_cache_all() __flush_invalidate_cache_all(); #define flush_cache_mm(mm) __flush_invalidate_cache_all(); +#define flush_cache_dup_mm(mm) __flush_invalidate_cache_all(); #define flush_cache_vmap(start,end) __flush_invalidate_cache_all(); #define flush_cache_vunmap(start,end) __flush_invalidate_cache_all(); @@ -88,6 +89,7 @@ extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned lon #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_vmap(start,end) do { } while (0) #define flush_cache_vunmap(start,end) do { } while (0) -- cgit v1.2.3 From aef6fba4f97bbec1dc5a253f388be9a4c7a30e41 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 13 Dec 2006 17:56:11 +0000 Subject: [PATCH] Add missing KORENIX PCI ID's Oops, sorry about that. Signed-off-by: Linus Torvalds --- include/linux/pci_ids.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 51180dba9a9..95c1e74afeb 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2067,6 +2067,10 @@ #define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 #define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 +#define PCI_VENDOR_ID_KORENIX 0x1982 +#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 +#define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 -- cgit v1.2.3 From 02828845dda5ccf921ab2557c6ca17b6e7fc70e2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 13 Dec 2006 18:39:26 +0100 Subject: [ARM] 4016/1: prefetch macro is wrong wrt gcc's "delete-null-pointer-checks" optimization The gcc manual says: |`-fdelete-null-pointer-checks' | Use global dataflow analysis to identify and eliminate useless | checks for null pointers. The compiler assumes that dereferencing | a null pointer would have halted the program. If a pointer is | checked after it has already been dereferenced, it cannot be null. | Enabled at levels `-O2', `-O3', `-Os'. Now the problem can be seen with this test case: #include extern void bar(char *x); void foo(char *x) { prefetch(x); if (x) bar(x); } Because the constraint to the inline asm used in the prefetch() macro is a memory operand, gcc assumes that the asm code does dereference the pointer and the delete-null-pointer-checks optimization kicks in. Inspection of generated assembly for the above example shows that bar() is indeed called unconditionally without any test on the value of x. Of course in the prefetch case there is no real dereference and it cannot be assumed that a null pointer would have been caught at that point. This causes kernel oopses with constructs like hlist_for_each_entry() where the list's 'next' content is prefetched before the pointer is tested against NULL, and only when gcc feels like applying this optimization which doesn't happen all the time with more complex code. It appears that the way to prevent delete-null-pointer-checks optimization to occur in this case is to make prefetch() into a static inline function instead of a macro. At least this is what is done on x86_64 where a similar inline asm memory operand is used (I presume they would have seen the same problem if it didn't work) and resulting code for the above example confirms that. An alternative would consist of replacing the memory operand by a register operand containing the pointer, and use the addressing mode explicitly in the asm template. But that would be less optimal than an offsettable memory reference. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- include/asm-arm/processor.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h index b442e8e2a80..1bbf16182d6 100644 --- a/include/asm-arm/processor.h +++ b/include/asm-arm/processor.h @@ -103,14 +103,14 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); #if __LINUX_ARM_ARCH__ >= 5 #define ARCH_HAS_PREFETCH -#define prefetch(ptr) \ - ({ \ - __asm__ __volatile__( \ - "pld\t%0" \ - : \ - : "o" (*(char *)(ptr)) \ - : "cc"); \ - }) +static inline void prefetch(const void *ptr) +{ + __asm__ __volatile__( + "pld\t%0" + : + : "o" (*(char *)ptr) + : "cc"); +} #define ARCH_HAS_PREFETCHW #define prefetchw(ptr) prefetch(ptr) -- cgit v1.2.3 From 47fd705287e9377acd2a4cee9aeeea02867d2e54 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 13 Dec 2006 18:33:53 +0000 Subject: [ARM] Provide a method to alter the control register i.MX needs to tweak the control register to support CPU frequency scaling. Rather than have folk blindly try and change the control register by writing to it and then wondering why it doesn't work, provide a method (which is safe for UP only, and therefore only available for UP) to achieve this. Signed-off-by: Russell King --- include/asm-arm/system.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include') diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index f60faccf01f..e160aeb0138 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -173,6 +173,26 @@ static inline void set_copro_access(unsigned int val) extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ +#ifndef CONFIG_SMP +static inline void adjust_cr(unsigned long mask, unsigned long set) +{ + unsigned long flags, cr; + + mask &= ~CR_A; + + set &= mask; + + local_irq_save(flags); + + cr_no_alignment = (cr_no_alignment & ~mask) | set; + cr_alignment = (cr_alignment & ~mask) | set; + + set_cr((get_cr() & ~mask) | set); + + local_irq_restore(flags); +} +#endif + #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) #define UDBG_BADABORT (1 << 2) -- cgit v1.2.3 From 3c8cd0cce9ab8a25dbcf519cb0de00d2716f8379 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Wed, 6 Dec 2006 17:25:04 +0100 Subject: [ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support Support to change MX1 CPU frequency at runtime. Tested on PiKRON's PiMX1 board and seems to be fully stable up to 200 MHz end even as low as 8 MHz. Signed-off-by: Pavel Pisa Signed-off-by: Russell King --- include/asm-arm/arch-imx/imx-regs.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index a6912b3d867..e56a4e247d6 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -41,7 +41,13 @@ /* PLL registers */ #define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SYSTEM_SEL (1<<16) +#define CSCR_SPLL_RESTART (1<<22) +#define CSCR_MPLL_RESTART (1<<21) +#define CSCR_SYSTEM_SEL (1<<16) +#define CSCR_BCLK_DIV (0xf<<10) +#define CSCR_MPU_PRESC (1<<15) +#define CSCR_SPEN (1<<1) +#define CSCR_MPEN (1<<0) #define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ #define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ @@ -49,8 +55,6 @@ #define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ #define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ -#define CSCR_MPLL_RESTART (1<<21) - /* * GPIO Module and I/O Multiplexer * x = 0..3 for reg_A, reg_B, reg_C, reg_D -- cgit v1.2.3 From 7806ca89bc0437d9952c6337d3bbddf1ea3591ff Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 13 Dec 2006 13:15:10 -0800 Subject: [IA64] Move sg_dma_{len,address} from pci.h to scatterlist.h IA64 is in a tiny minority providing these defines in pci.h. Almost everyone else has them in scatterlist.h Signed-off-by: Tony Luck --- include/asm-ia64/pci.h | 3 --- include/asm-ia64/scatterlist.h | 3 +++ 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h index 825eb7d882e..556f53fa44c 100644 --- a/include/asm-ia64/pci.h +++ b/include/asm-ia64/pci.h @@ -78,9 +78,6 @@ pcibios_penalize_isa_irq (int irq, int active) #define pci_dac_dma_sync_single_for_cpu(dev,dma_addr,len,dir) do { } while (0) #define pci_dac_dma_sync_single_for_device(dev,dma_addr,len,dir) do { mb(); } while (0) -#define sg_dma_len(sg) ((sg)->dma_length) -#define sg_dma_address(sg) ((sg)->dma_address) - #ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h index 834a189ef18..9dbea8844d5 100644 --- a/include/asm-ia64/scatterlist.h +++ b/include/asm-ia64/scatterlist.h @@ -25,4 +25,7 @@ struct scatterlist { */ #define ISA_DMA_THRESHOLD 0xffffffff +#define sg_dma_len(sg) ((sg)->dma_length) +#define sg_dma_address(sg) ((sg)->dma_address) + #endif /* _ASM_IA64_SCATTERLIST_H */ -- cgit v1.2.3 From 6eefd34fdcbd34e2cddb8b7da26d838367591954 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 4 Dec 2006 14:57:19 -0800 Subject: Driver core: Make platform_device_add_data accept a const pointer platform_device_add_data() makes a copy of the data that is given to it, and thus the parameter can be const. This removes a warning when data from get_property() on powerpc is handed to platform_device_add_data(), as get_property() returns a const pointer. Signed-off-by: Scott Wood Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_device.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 20f47b81d3f..8bbd459eafd 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -39,7 +39,7 @@ extern struct platform_device *platform_device_register_simple(char *, unsigned extern struct platform_device *platform_device_alloc(const char *name, unsigned int id); extern int platform_device_add_resources(struct platform_device *pdev, struct resource *res, unsigned int num); -extern int platform_device_add_data(struct platform_device *pdev, void *data, size_t size); +extern int platform_device_add_data(struct platform_device *pdev, const void *data, size_t size); extern int platform_device_add(struct platform_device *pdev); extern void platform_device_del(struct platform_device *pdev); extern void platform_device_put(struct platform_device *pdev); -- cgit v1.2.3 From fe0b9294c9f951a64c768f8a5879154235efe63f Mon Sep 17 00:00:00 2001 From: Yasuyuki Kozakai Date: Tue, 12 Dec 2006 00:28:40 -0800 Subject: [NETFILTER]: x_tables: error if ip_conntrack is asked to handle IPv6 packets To do that, this makes nf_ct_l3proto_try_module_{get,put} compatible functions. As a result we can remove '#ifdef' surrounds and direct call of need_conntrack(). Signed-off-by: Yasuyuki Kozakai Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/netfilter/nf_conntrack_compat.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/net/netfilter/nf_conntrack_compat.h b/include/net/netfilter/nf_conntrack_compat.h index f1b1482d720..b9ce5c80d9d 100644 --- a/include/net/netfilter/nf_conntrack_compat.h +++ b/include/net/netfilter/nf_conntrack_compat.h @@ -64,6 +64,16 @@ static inline int nf_ct_get_ctinfo(const struct sk_buff *skb, return (ct != NULL); } +static inline int nf_ct_l3proto_try_module_get(unsigned short l3proto) +{ + need_conntrack(); + return l3proto == PF_INET ? 0 : -1; +} + +static inline void nf_ct_l3proto_module_put(unsigned short l3proto) +{ +} + #else /* CONFIG_IP_NF_CONNTRACK */ #include -- cgit v1.2.3 From 29c7cf96186ac14ce7380633f690fc39732ff03a Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Wed, 13 Dec 2006 16:26:26 -0800 Subject: [SCTP]: Handle address add/delete events in a more efficient way. Currently in SCTP, we maintain a local address list by rebuilding the whole list from the device list whenever we get a address add/delete event. This patch fixes it by only adding/deleting the address for which we receive the event. Also removed the sctp_local_addr_lock() which is no longer needed as we now use list_for_each_safe() to traverse this list. This fixes the bugs in sctp_copy_laddrs_xxx() routines where we do copy_to_user() while holding this lock. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index c089f93ba59..b00d85e14fe 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -201,13 +201,12 @@ extern struct sctp_globals { struct sctp_bind_hashbucket *port_hashtable; /* This is the global local address list. - * We actively maintain this complete list of interfaces on - * the system by catching routing events. + * We actively maintain this complete list of addresses on + * the system by catching address add/delete events. * * It is a list of sctp_sockaddr_entry. */ struct list_head local_addr_list; - spinlock_t local_addr_lock; /* Flag to indicate if addip is enabled. */ int addip_enable; @@ -243,7 +242,6 @@ extern struct sctp_globals { #define sctp_port_alloc_lock (sctp_globals.port_alloc_lock) #define sctp_port_hashtable (sctp_globals.port_hashtable) #define sctp_local_addr_list (sctp_globals.local_addr_list) -#define sctp_local_addr_lock (sctp_globals.local_addr_lock) #define sctp_addip_enable (sctp_globals.addip_enable) #define sctp_prsctp_enable (sctp_globals.prsctp_enable) -- cgit v1.2.3 From 6ab792f577012312a760a3a1e679ae8fae012442 Mon Sep 17 00:00:00 2001 From: Ivan Skytte Jorgensen Date: Wed, 13 Dec 2006 16:34:22 -0800 Subject: [SCTP]: Add support for SCTP_CONTEXT socket option. Signed-off-by: Ivan Skytte Jorgensen Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 4 ++++ include/net/sctp/user.h | 2 ++ 2 files changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index b00d85e14fe..8d7f26d684e 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -275,6 +275,7 @@ struct sctp_sock { __u16 default_flags; __u32 default_context; __u32 default_timetolive; + __u32 default_rcv_context; /* Heartbeat interval: The endpoint sends out a Heartbeat chunk to * the destination address every heartbeat interval. This value @@ -1657,6 +1658,9 @@ struct sctp_association { __u32 default_context; __u32 default_timetolive; + /* Default receive parameters */ + __u32 default_rcv_context; + /* This tracks outbound ssn for a given stream. */ struct sctp_ssnmap *ssnmap; diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index 1b7aae6cdd8..9e4a39fd129 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -95,6 +95,8 @@ enum sctp_optname { #define SCTP_GET_PEER_ADDR_INFO SCTP_GET_PEER_ADDR_INFO SCTP_DELAYED_ACK_TIME, #define SCTP_DELAYED_ACK_TIME SCTP_DELAYED_ACK_TIME + SCTP_CONTEXT, /* Receive Context */ +#define SCTP_CONTEXT SCTP_CONTEXT /* Internal Socket Options. Some of the sctp library functions are * implemented using these socket options. -- cgit v1.2.3 From 8bce65b95ac167693ae2d706b5341409dca0062d Mon Sep 17 00:00:00 2001 From: Kim Nordlund Date: Wed, 13 Dec 2006 16:38:29 -0800 Subject: [IPV6]: Make fib6_node subtree depend on IPV6_SUBTREES Make fib6_node 'subtree' depend on IPV6_SUBTREES. Signed-off-by: Kim Nordlund Signed-off-by: David S. Miller --- include/net/ip6_fib.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index f9cde44f93b..7be4f4e3a0f 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -50,9 +50,9 @@ struct fib6_node struct fib6_node *parent; struct fib6_node *left; struct fib6_node *right; - +#ifdef CONFIG_IPV6_SUBTREES struct fib6_node *subtree; - +#endif struct rt6_info *leaf; __u16 fn_bit; /* bit key */ -- cgit v1.2.3 From 2bf540b73ed5b304e84bb4d4c390d49d1cfa0ef8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 13 Dec 2006 16:54:25 -0800 Subject: [NETFILTER]: bridge-netfilter: remove deferred hooks Remove the deferred hooks and all related code as scheduled in feature-removal-schedule. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_bridge.h | 1 - include/linux/netfilter_ipv4.h | 2 -- include/linux/netfilter_ipv6.h | 2 -- 3 files changed, 5 deletions(-) (limited to 'include') diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 6c4613f8ad7..55689f39f77 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -68,7 +68,6 @@ struct bridge_skb_cb { } daddr; }; -extern int brnf_deferred_hooks; #else #define nf_bridge_maybe_copy_header(skb) (0) #define nf_bridge_pad(skb) (0) diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index 5821eb5a0a3..ceae87a4c89 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -57,10 +57,8 @@ enum nf_ip_hook_priorities { NF_IP_PRI_RAW = -300, NF_IP_PRI_SELINUX_FIRST = -225, NF_IP_PRI_CONNTRACK = -200, - NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD = -175, NF_IP_PRI_MANGLE = -150, NF_IP_PRI_NAT_DST = -100, - NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT = -50, NF_IP_PRI_FILTER = 0, NF_IP_PRI_NAT_SRC = 100, NF_IP_PRI_SELINUX_LAST = 225, diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index ab81a6dc94e..66ca8e3100d 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -62,10 +62,8 @@ enum nf_ip6_hook_priorities { NF_IP6_PRI_CONNTRACK_DEFRAG = -400, NF_IP6_PRI_SELINUX_FIRST = -225, NF_IP6_PRI_CONNTRACK = -200, - NF_IP6_PRI_BRIDGE_SABOTAGE_FORWARD = -175, NF_IP6_PRI_MANGLE = -150, NF_IP6_PRI_NAT_DST = -100, - NF_IP6_PRI_BRIDGE_SABOTAGE_LOCAL_OUT = -50, NF_IP6_PRI_FILTER = 0, NF_IP6_PRI_NAT_SRC = 100, NF_IP6_PRI_SELINUX_LAST = 225, -- cgit v1.2.3 From d1998ef38a13c4e74c69df55ccd38b0440c429b2 Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Wed, 13 Dec 2006 22:10:05 -0500 Subject: [PATCH] ib_verbs: Use explicit if-else statements to avoid errors with do-while macros At least on PPC, the "op ? op : dma" construct causes a compile failure because the dma_* is a do{}while(0) macro. This turns all of them into proper if/else to avoid this problem. Signed-off-by: Ben Collins Signed-off-by: Linus Torvalds --- include/rdma/ib_verbs.h | 70 +++++++++++++++++++++++++++---------------------- 1 file changed, 39 insertions(+), 31 deletions(-) (limited to 'include') diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index fd2353fa7e1..3c2e10574b2 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -1456,9 +1456,9 @@ struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags); */ static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr) { - return dev->dma_ops ? - dev->dma_ops->mapping_error(dev, dma_addr) : - dma_mapping_error(dma_addr); + if (dev->dma_ops) + return dev->dma_ops->mapping_error(dev, dma_addr); + return dma_mapping_error(dma_addr); } /** @@ -1472,9 +1472,9 @@ static inline u64 ib_dma_map_single(struct ib_device *dev, void *cpu_addr, size_t size, enum dma_data_direction direction) { - return dev->dma_ops ? - dev->dma_ops->map_single(dev, cpu_addr, size, direction) : - dma_map_single(dev->dma_device, cpu_addr, size, direction); + if (dev->dma_ops) + return dev->dma_ops->map_single(dev, cpu_addr, size, direction); + return dma_map_single(dev->dma_device, cpu_addr, size, direction); } /** @@ -1488,8 +1488,9 @@ static inline void ib_dma_unmap_single(struct ib_device *dev, u64 addr, size_t size, enum dma_data_direction direction) { - dev->dma_ops ? - dev->dma_ops->unmap_single(dev, addr, size, direction) : + if (dev->dma_ops) + dev->dma_ops->unmap_single(dev, addr, size, direction); + else dma_unmap_single(dev->dma_device, addr, size, direction); } @@ -1507,9 +1508,9 @@ static inline u64 ib_dma_map_page(struct ib_device *dev, size_t size, enum dma_data_direction direction) { - return dev->dma_ops ? - dev->dma_ops->map_page(dev, page, offset, size, direction) : - dma_map_page(dev->dma_device, page, offset, size, direction); + if (dev->dma_ops) + return dev->dma_ops->map_page(dev, page, offset, size, direction); + return dma_map_page(dev->dma_device, page, offset, size, direction); } /** @@ -1523,8 +1524,9 @@ static inline void ib_dma_unmap_page(struct ib_device *dev, u64 addr, size_t size, enum dma_data_direction direction) { - dev->dma_ops ? - dev->dma_ops->unmap_page(dev, addr, size, direction) : + if (dev->dma_ops) + dev->dma_ops->unmap_page(dev, addr, size, direction); + else dma_unmap_page(dev->dma_device, addr, size, direction); } @@ -1539,9 +1541,9 @@ static inline int ib_dma_map_sg(struct ib_device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { - return dev->dma_ops ? - dev->dma_ops->map_sg(dev, sg, nents, direction) : - dma_map_sg(dev->dma_device, sg, nents, direction); + if (dev->dma_ops) + return dev->dma_ops->map_sg(dev, sg, nents, direction); + return dma_map_sg(dev->dma_device, sg, nents, direction); } /** @@ -1555,8 +1557,9 @@ static inline void ib_dma_unmap_sg(struct ib_device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { - dev->dma_ops ? - dev->dma_ops->unmap_sg(dev, sg, nents, direction) : + if (dev->dma_ops) + dev->dma_ops->unmap_sg(dev, sg, nents, direction); + else dma_unmap_sg(dev->dma_device, sg, nents, direction); } @@ -1568,8 +1571,9 @@ static inline void ib_dma_unmap_sg(struct ib_device *dev, static inline u64 ib_sg_dma_address(struct ib_device *dev, struct scatterlist *sg) { - return dev->dma_ops ? - dev->dma_ops->dma_address(dev, sg) : sg_dma_address(sg); + if (dev->dma_ops) + return dev->dma_ops->dma_address(dev, sg); + return sg_dma_address(sg); } /** @@ -1580,8 +1584,9 @@ static inline u64 ib_sg_dma_address(struct ib_device *dev, static inline unsigned int ib_sg_dma_len(struct ib_device *dev, struct scatterlist *sg) { - return dev->dma_ops ? - dev->dma_ops->dma_len(dev, sg) : sg_dma_len(sg); + if (dev->dma_ops) + return dev->dma_ops->dma_len(dev, sg); + return sg_dma_len(sg); } /** @@ -1596,8 +1601,9 @@ static inline void ib_dma_sync_single_for_cpu(struct ib_device *dev, size_t size, enum dma_data_direction dir) { - dev->dma_ops ? - dev->dma_ops->sync_single_for_cpu(dev, addr, size, dir) : + if (dev->dma_ops) + dev->dma_ops->sync_single_for_cpu(dev, addr, size, dir); + else dma_sync_single_for_cpu(dev->dma_device, addr, size, dir); } @@ -1613,8 +1619,9 @@ static inline void ib_dma_sync_single_for_device(struct ib_device *dev, size_t size, enum dma_data_direction dir) { - dev->dma_ops ? - dev->dma_ops->sync_single_for_device(dev, addr, size, dir) : + if (dev->dma_ops) + dev->dma_ops->sync_single_for_device(dev, addr, size, dir); + else dma_sync_single_for_device(dev->dma_device, addr, size, dir); } @@ -1630,9 +1637,9 @@ static inline void *ib_dma_alloc_coherent(struct ib_device *dev, u64 *dma_handle, gfp_t flag) { - return dev->dma_ops ? - dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag) : - dma_alloc_coherent(dev->dma_device, size, dma_handle, flag); + if (dev->dma_ops) + return dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag); + return dma_alloc_coherent(dev->dma_device, size, dma_handle, flag); } /** @@ -1646,8 +1653,9 @@ static inline void ib_dma_free_coherent(struct ib_device *dev, size_t size, void *cpu_addr, u64 dma_handle) { - dev->dma_ops ? - dev->dma_ops->free_coherent(dev, size, cpu_addr, dma_handle) : + if (dev->dma_ops) + dev->dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); + else dma_free_coherent(dev->dma_device, size, cpu_addr, dma_handle); } -- cgit v1.2.3 From 1c1e40b5ad6e345feba69bc612db006efccf4cdc Mon Sep 17 00:00:00 2001 From: Florian Festi Date: Thu, 14 Dec 2006 11:59:11 +0100 Subject: input/hid: Supporting more keys from the HUT Consumer Page On USB keyboards lots of hot/internet keys are not working. This patch adds support for a number of keys from the USB HID Usage Table (http://www.usb.org/developers/devclass_docs/Hut1_12.pdf). It also adds several new key codes. Most of them are used on real world keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE, NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes". I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a remote control in parallel and it makes sense to have them behave differently. Signed-off-by: Florian Festi Signed-off-by: Jiri Kosina --- include/linux/input.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index 4e61158b06a..bde65c8a351 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -491,6 +491,21 @@ struct input_absinfo { #define KEY_DIGITS 0x19d #define KEY_TEEN 0x19e #define KEY_TWEN 0x19f +#define KEY_VIDEOPHONE 0x1a0 +#define KEY_GAMES 0x1a1 +#define KEY_ZOOMIN 0x1a2 +#define KEY_ZOOMOUT 0x1a3 +#define KEY_ZOOMRESET 0x1a4 +#define KEY_WORDPROCESSOR 0x1a5 +#define KEY_EDITOR 0x1a6 +#define KEY_SPREADSHEET 0x1a7 +#define KEY_GRAPHICSEDITOR 0x1a8 +#define KEY_PRESENTATION 0x1a9 +#define KEY_DATABASE 0x1aa +#define KEY_NEWS 0x1ab +#define KEY_VOICEMAIL 0x1ac +#define KEY_ADDRESSBOOK 0x1ad +#define KEY_MESSENGER 0x1ae #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 -- cgit v1.2.3 From 028cf917b258b11286437a1b96e64030f94fd46d Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 15 Dec 2006 17:18:14 +0100 Subject: [S390] Hipersocket multicast queue: make sure outbound handler is called A HiperSocket multicast queue works asynchronously. When sending buffers, the buffer state change from PRIMED to EMPTY may happen delayed. Reschedule the checking for changes in the outbound queue, if there are still PRIMED buffers. Signed-off-by: Ursula Braun Signed-off-by: Martin Schwidefsky --- include/asm-s390/qdio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h index 7189c79bc67..127f72e7741 100644 --- a/include/asm-s390/qdio.h +++ b/include/asm-s390/qdio.h @@ -34,6 +34,7 @@ #define QDIO_QETH_QFMT 0 #define QDIO_ZFCP_QFMT 1 #define QDIO_IQDIO_QFMT 2 +#define QDIO_IQDIO_QFMT_ASYNCH 3 struct qdio_buffer_element{ unsigned int flags; -- cgit v1.2.3 From a45e14148fb34175cba042df8979e7982758635f Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 15 Dec 2006 17:18:22 +0100 Subject: [S390] Fix reboot hang on LPARs Reboot hangs on LPARs without diag308 support. The reason for this is, that before the reboot is done, the channel subsystem is shut down. During the reset on each possible subchannel a "store subchannel" is done. This operation can end in a program check interruption, if the specified subchannel set is not implemented by the hardware. During the reset, currently we do not have a program check handler, which leads to the described kernel bug. We install now a new program check handler for the reboot code to fix this problem. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- include/asm-s390/reset.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-s390/reset.h b/include/asm-s390/reset.h index 9b439cf6780..532e65a2aaf 100644 --- a/include/asm-s390/reset.h +++ b/include/asm-s390/reset.h @@ -19,5 +19,6 @@ extern void register_reset_call(struct reset_call *reset); extern void unregister_reset_call(struct reset_call *reset); extern void s390_reset_system(void); extern void (*s390_reset_mcck_handler)(void); +extern void (*s390_reset_pgm_handler)(void); #endif /* _ASM_S390_RESET_H */ -- cgit v1.2.3 From d1526e2cda64d5a1de56aef50bad9e5df14245c2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 15 Dec 2006 08:43:13 -0800 Subject: Remove stack unwinder for now It has caused more problems than it ever really solved, and is apparently not getting cleaned up and fixed. We can put it back when it's stable and isn't likely to make warning or bug events worse. In the meantime, enable frame pointers for more readable stack traces. Signed-off-by: Linus Torvalds --- include/asm-generic/vmlinux.lds.h | 22 --------- include/asm-i386/unwind.h | 91 ------------------------------------- include/asm-x86_64/unwind.h | 96 --------------------------------------- include/linux/unwind.h | 63 +------------------------ 4 files changed, 2 insertions(+), 270 deletions(-) (limited to 'include') diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 7437ccaada7..1587121730c 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -119,8 +119,6 @@ *(__ksymtab_strings) \ } \ \ - EH_FRAME \ - \ /* Built-in module parameters. */ \ __param : AT(ADDR(__param) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___param) = .; \ @@ -160,26 +158,6 @@ *(.kprobes.text) \ VMLINUX_SYMBOL(__kprobes_text_end) = .; -#ifdef CONFIG_STACK_UNWIND -#define EH_FRAME \ - /* Unwind data binary search table */ \ - . = ALIGN(8); \ - .eh_frame_hdr : AT(ADDR(.eh_frame_hdr) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start_unwind_hdr) = .; \ - *(.eh_frame_hdr) \ - VMLINUX_SYMBOL(__end_unwind_hdr) = .; \ - } \ - /* Unwind data */ \ - . = ALIGN(8); \ - .eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start_unwind) = .; \ - *(.eh_frame) \ - VMLINUX_SYMBOL(__end_unwind) = .; \ - } -#else -#define EH_FRAME -#endif - /* DWARF debug sections. Symbols in the DWARF debugging sections are relative to the beginning of the section so we begin them at 0. */ diff --git a/include/asm-i386/unwind.h b/include/asm-i386/unwind.h index aa2c931e30d..43c70c3de2f 100644 --- a/include/asm-i386/unwind.h +++ b/include/asm-i386/unwind.h @@ -1,95 +1,6 @@ #ifndef _ASM_I386_UNWIND_H #define _ASM_I386_UNWIND_H -/* - * Copyright (C) 2002-2006 Novell, Inc. - * Jan Beulich - * This code is released under version 2 of the GNU GPL. - */ - -#ifdef CONFIG_STACK_UNWIND - -#include -#include -#include -#include - -struct unwind_frame_info -{ - struct pt_regs regs; - struct task_struct *task; - unsigned call_frame:1; -}; - -#define UNW_PC(frame) (frame)->regs.eip -#define UNW_SP(frame) (frame)->regs.esp -#ifdef CONFIG_FRAME_POINTER -#define UNW_FP(frame) (frame)->regs.ebp -#define FRAME_RETADDR_OFFSET 4 -#define FRAME_LINK_OFFSET 0 -#define STACK_BOTTOM(tsk) STACK_LIMIT((tsk)->thread.esp0) -#define STACK_TOP(tsk) ((tsk)->thread.esp0) -#else -#define UNW_FP(frame) ((void)(frame), 0) -#endif -#define STACK_LIMIT(ptr) (((ptr) - 1) & ~(THREAD_SIZE - 1)) - -#define UNW_REGISTER_INFO \ - PTREGS_INFO(eax), \ - PTREGS_INFO(ecx), \ - PTREGS_INFO(edx), \ - PTREGS_INFO(ebx), \ - PTREGS_INFO(esp), \ - PTREGS_INFO(ebp), \ - PTREGS_INFO(esi), \ - PTREGS_INFO(edi), \ - PTREGS_INFO(eip) - -#define UNW_DEFAULT_RA(raItem, dataAlign) \ - ((raItem).where == Memory && \ - !((raItem).value * (dataAlign) + 4)) - -static inline void arch_unw_init_frame_info(struct unwind_frame_info *info, - /*const*/ struct pt_regs *regs) -{ - if (user_mode_vm(regs)) - info->regs = *regs; - else { - memcpy(&info->regs, regs, offsetof(struct pt_regs, esp)); - info->regs.esp = (unsigned long)®s->esp; - info->regs.xss = __KERNEL_DS; - } -} - -static inline void arch_unw_init_blocked(struct unwind_frame_info *info) -{ - memset(&info->regs, 0, sizeof(info->regs)); - info->regs.eip = info->task->thread.eip; - info->regs.xcs = __KERNEL_CS; - __get_user(info->regs.ebp, (long *)info->task->thread.esp); - info->regs.esp = info->task->thread.esp; - info->regs.xss = __KERNEL_DS; - info->regs.xds = __USER_DS; - info->regs.xes = __USER_DS; - info->regs.xgs = __KERNEL_PDA; -} - -extern asmlinkage int arch_unwind_init_running(struct unwind_frame_info *, - asmlinkage int (*callback)(struct unwind_frame_info *, - void *arg), - void *arg); - -static inline int arch_unw_user_mode(/*const*/ struct unwind_frame_info *info) -{ - return user_mode_vm(&info->regs) - || info->regs.eip < PAGE_OFFSET - || (info->regs.eip >= __fix_to_virt(FIX_VDSO) - && info->regs.eip < __fix_to_virt(FIX_VDSO) + PAGE_SIZE) - || info->regs.esp < PAGE_OFFSET; -} - -#else - #define UNW_PC(frame) ((void)(frame), 0) #define UNW_SP(frame) ((void)(frame), 0) #define UNW_FP(frame) ((void)(frame), 0) @@ -99,6 +10,4 @@ static inline int arch_unw_user_mode(const void *info) return 0; } -#endif - #endif /* _ASM_I386_UNWIND_H */ diff --git a/include/asm-x86_64/unwind.h b/include/asm-x86_64/unwind.h index 2f6349e4871..02710f6a456 100644 --- a/include/asm-x86_64/unwind.h +++ b/include/asm-x86_64/unwind.h @@ -1,100 +1,6 @@ #ifndef _ASM_X86_64_UNWIND_H #define _ASM_X86_64_UNWIND_H -/* - * Copyright (C) 2002-2006 Novell, Inc. - * Jan Beulich - * This code is released under version 2 of the GNU GPL. - */ - -#ifdef CONFIG_STACK_UNWIND - -#include -#include -#include -#include - -struct unwind_frame_info -{ - struct pt_regs regs; - struct task_struct *task; - unsigned call_frame:1; -}; - -#define UNW_PC(frame) (frame)->regs.rip -#define UNW_SP(frame) (frame)->regs.rsp -#ifdef CONFIG_FRAME_POINTER -#define UNW_FP(frame) (frame)->regs.rbp -#define FRAME_RETADDR_OFFSET 8 -#define FRAME_LINK_OFFSET 0 -#define STACK_BOTTOM(tsk) (((tsk)->thread.rsp0 - 1) & ~(THREAD_SIZE - 1)) -#define STACK_TOP(tsk) ((tsk)->thread.rsp0) -#endif -/* Might need to account for the special exception and interrupt handling - stacks here, since normally - EXCEPTION_STACK_ORDER < THREAD_ORDER < IRQSTACK_ORDER, - but the construct is needed only for getting across the stack switch to - the interrupt stack - thus considering the IRQ stack itself is unnecessary, - and the overhead of comparing against all exception handling stacks seems - not desirable. */ -#define STACK_LIMIT(ptr) (((ptr) - 1) & ~(THREAD_SIZE - 1)) - -#define UNW_REGISTER_INFO \ - PTREGS_INFO(rax), \ - PTREGS_INFO(rdx), \ - PTREGS_INFO(rcx), \ - PTREGS_INFO(rbx), \ - PTREGS_INFO(rsi), \ - PTREGS_INFO(rdi), \ - PTREGS_INFO(rbp), \ - PTREGS_INFO(rsp), \ - PTREGS_INFO(r8), \ - PTREGS_INFO(r9), \ - PTREGS_INFO(r10), \ - PTREGS_INFO(r11), \ - PTREGS_INFO(r12), \ - PTREGS_INFO(r13), \ - PTREGS_INFO(r14), \ - PTREGS_INFO(r15), \ - PTREGS_INFO(rip) - -#define UNW_DEFAULT_RA(raItem, dataAlign) \ - ((raItem).where == Memory && \ - !((raItem).value * (dataAlign) + 8)) - -static inline void arch_unw_init_frame_info(struct unwind_frame_info *info, - /*const*/ struct pt_regs *regs) -{ - info->regs = *regs; -} - -static inline void arch_unw_init_blocked(struct unwind_frame_info *info) -{ - extern const char thread_return[]; - - memset(&info->regs, 0, sizeof(info->regs)); - info->regs.rip = (unsigned long)thread_return; - info->regs.cs = __KERNEL_CS; - __get_user(info->regs.rbp, (unsigned long *)info->task->thread.rsp); - info->regs.rsp = info->task->thread.rsp; - info->regs.ss = __KERNEL_DS; -} - -extern int arch_unwind_init_running(struct unwind_frame_info *, - int (*callback)(struct unwind_frame_info *, - void *arg), - void *arg); - -static inline int arch_unw_user_mode(const struct unwind_frame_info *info) -{ - return user_mode(&info->regs) - || (long)info->regs.rip >= 0 - || (info->regs.rip >= VSYSCALL_START && info->regs.rip < VSYSCALL_END) - || (long)info->regs.rsp >= 0; -} - -#else - #define UNW_PC(frame) ((void)(frame), 0UL) #define UNW_SP(frame) ((void)(frame), 0UL) @@ -103,6 +9,4 @@ static inline int arch_unw_user_mode(const void *info) return 0; } -#endif - #endif /* _ASM_X86_64_UNWIND_H */ diff --git a/include/linux/unwind.h b/include/linux/unwind.h index 749928c161f..7760860fa17 100644 --- a/include/linux/unwind.h +++ b/include/linux/unwind.h @@ -14,63 +14,6 @@ struct module; -#ifdef CONFIG_STACK_UNWIND - -#include - -#ifndef ARCH_UNWIND_SECTION_NAME -#define ARCH_UNWIND_SECTION_NAME ".eh_frame" -#endif - -/* - * Initialize unwind support. - */ -extern void unwind_init(void); -extern void unwind_setup(void); - -#ifdef CONFIG_MODULES - -extern void *unwind_add_table(struct module *, - const void *table_start, - unsigned long table_size); - -extern void unwind_remove_table(void *handle, int init_only); - -#endif - -extern int unwind_init_frame_info(struct unwind_frame_info *, - struct task_struct *, - /*const*/ struct pt_regs *); - -/* - * Prepare to unwind a blocked task. - */ -extern int unwind_init_blocked(struct unwind_frame_info *, - struct task_struct *); - -/* - * Prepare to unwind the currently running thread. - */ -extern int unwind_init_running(struct unwind_frame_info *, - asmlinkage int (*callback)(struct unwind_frame_info *, - void *arg), - void *arg); - -/* - * Unwind to previous to frame. Returns 0 if successful, negative - * number in case of an error. - */ -extern int unwind(struct unwind_frame_info *); - -/* - * Unwind until the return pointer is in user-land (or until an error - * occurs). Returns 0 if successful, negative number in case of - * error. - */ -extern int unwind_to_user(struct unwind_frame_info *); - -#else - struct unwind_frame_info {}; static inline void unwind_init(void) {} @@ -85,12 +28,12 @@ static inline void *unwind_add_table(struct module *mod, return NULL; } -#endif - static inline void unwind_remove_table(void *handle, int init_only) { } +#endif + static inline int unwind_init_frame_info(struct unwind_frame_info *info, struct task_struct *tsk, const struct pt_regs *regs) @@ -122,6 +65,4 @@ static inline int unwind_to_user(struct unwind_frame_info *info) return -ENOSYS; } -#endif - #endif /* _LINUX_UNWIND_H */ -- cgit v1.2.3 From c59a3da1342ff456e5123361739bc331446cda21 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 15 Dec 2006 13:57:26 -0800 Subject: IB: Fix ib_dma_alloc_coherent() wrapper The ib_dma_alloc_coherent() wrapper uses a u64* for the dma_handle parameter, unlike dma_alloc_coherent, which uses dma_addr_t*. This means that we need a temporary variable to handle the case when ib_dma_alloc_coherent() just falls through directly to dma_alloc_coherent() on architectures where sizeof u64 != sizeof dma_addr_t. Signed-off-by: Roland Dreier --- include/rdma/ib_verbs.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 3c2e10574b2..0bfa3328d68 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -1639,7 +1639,14 @@ static inline void *ib_dma_alloc_coherent(struct ib_device *dev, { if (dev->dma_ops) return dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag); - return dma_alloc_coherent(dev->dma_device, size, dma_handle, flag); + else { + dma_addr_t handle; + void *ret; + + ret = dma_alloc_coherent(dev->dma_device, size, &handle, flag); + *dma_handle = handle; + return ret; + } } /** -- cgit v1.2.3 From 0221872a3b0aa2fa2f3fa60affcbaebd662c4a90 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 15 Dec 2006 14:13:51 -0800 Subject: Fix "delayed_work_pending()" macro expansion Nobody uses it, but it was still wrong. Using the macro argument name 'work' meant that when we used 'work' as a member name, that would also get replaced by the macro argument. Signed-off-by: Linus Torvalds --- include/linux/workqueue.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index edef8d50b26..5b13dcf0271 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -121,8 +121,8 @@ struct execute_work { * pending * @work: The work item in question */ -#define delayed_work_pending(work) \ - test_bit(WORK_STRUCT_PENDING, &(work)->work.management) +#define delayed_work_pending(w) \ + work_pending(&(w)->work) /** * work_release - Release a work item under execution -- cgit v1.2.3 From d43ec68e9837dfa6618ab473622683fdbf6e68a9 Mon Sep 17 00:00:00 2001 From: Patrick Mochel Date: Thu, 7 Dec 2006 20:56:23 +0800 Subject: ACPI: add device_driver and hepler functions Add device_driver into acpi_driver for driver model. Add helper functions 'to_acpi_device' and 'to_acpi_driver' to get structure acpi_device/acpi_driver by device/device_driver. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index fdd10953b2b..a09538eb61e 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -136,6 +136,7 @@ struct acpi_driver { atomic_t references; char *ids; /* Supported Hardware IDs */ struct acpi_device_ops ops; + struct device_driver drv; }; /* @@ -301,6 +302,8 @@ struct acpi_device { }; #define acpi_driver_data(d) ((d)->driver_data) +#define to_acpi_device(d) container_of(d, struct acpi_device, dev) +#define to_acpi_driver(d) container_of(d, struct acpi_driver, drv) /* * Events -- cgit v1.2.3 From 5d9464a46918ced087c351a10f38cee95725f85b Mon Sep 17 00:00:00 2001 From: Patrick Mochel Date: Thu, 7 Dec 2006 20:56:27 +0800 Subject: ACPI: add ACPI bus_type for driver model Add ACPI bus_type for Linux driver model. 1. .shutdown method is added into acpi_driver.ops needed by bus_type operations. 2. remove useless parameter 'int state' in .resume method. 3. change parameter 'int state' to 'pm_message_t state' in .suspend method. Note: The new .uevent method mark ACPI drivers by PNPID instead of by name. Udev script needs to look for "HWID=" or "COMPTID=" to load ACPI drivers as a result. Signed-off-by: Li Shaohua Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index a09538eb61e..d7dd5261545 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -92,13 +92,14 @@ typedef int (*acpi_op_remove) (struct acpi_device * device, int type); typedef int (*acpi_op_lock) (struct acpi_device * device, int type); typedef int (*acpi_op_start) (struct acpi_device * device); typedef int (*acpi_op_stop) (struct acpi_device * device, int type); -typedef int (*acpi_op_suspend) (struct acpi_device * device, int state); -typedef int (*acpi_op_resume) (struct acpi_device * device, int state); +typedef int (*acpi_op_suspend) (struct acpi_device * device, pm_message_t state); +typedef int (*acpi_op_resume) (struct acpi_device * device); typedef int (*acpi_op_scan) (struct acpi_device * device); typedef int (*acpi_op_bind) (struct acpi_device * device); typedef int (*acpi_op_unbind) (struct acpi_device * device); typedef int (*acpi_op_match) (struct acpi_device * device, struct acpi_driver * driver); +typedef int (*acpi_op_shutdown) (struct acpi_device * device); struct acpi_bus_ops { u32 acpi_op_add:1; @@ -112,7 +113,8 @@ struct acpi_bus_ops { u32 acpi_op_bind:1; u32 acpi_op_unbind:1; u32 acpi_op_match:1; - u32 reserved:21; + u32 acpi_op_shutdown:1; + u32 reserved:20; }; struct acpi_device_ops { @@ -127,6 +129,7 @@ struct acpi_device_ops { acpi_op_bind bind; acpi_op_unbind unbind; acpi_op_match match; + acpi_op_shutdown shutdown; }; struct acpi_driver { -- cgit v1.2.3 From 1890a97ab3f66d1e99768439f8067608b9b97fe3 Mon Sep 17 00:00:00 2001 From: Patrick Mochel Date: Thu, 7 Dec 2006 20:56:31 +0800 Subject: ACPI: change registration interface to follow driver model ACPI device/driver registration Interfaces are modified to follow Linux driver model. Signed-off-by: Li Shaohua Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index d7dd5261545..807acf69a70 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -133,13 +133,12 @@ struct acpi_device_ops { }; struct acpi_driver { - struct list_head node; char name[80]; char class[80]; - atomic_t references; char *ids; /* Supported Hardware IDs */ struct acpi_device_ops ops; struct device_driver drv; + struct module *owner; }; /* -- cgit v1.2.3 From f883d9db008deb20d4969c26475100cec2b7f6f8 Mon Sep 17 00:00:00 2001 From: Patrick Mochel Date: Thu, 7 Dec 2006 20:56:38 +0800 Subject: ACPI: convert to sysfs framework Setup new sysfs framework 1. Remove /sys/firmware/acpi 2. Add ACPI device in device tree. File "eject" for every device that has _EJ0 method is moved from /sys/firmware to /sys/devices. Operation on this file is exactly the same as before. i.e. echo 1 to "eject" will cause hot removal of this device. Corresponding changes should be made in userspace for hot removal. Signed-off-by: Li Shaohua Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 807acf69a70..598fab35281 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -299,7 +299,6 @@ struct acpi_device { struct acpi_device_ops ops; struct acpi_driver *driver; void *driver_data; - struct kobject kobj; struct device dev; }; -- cgit v1.2.3 From c4168bff32e218b8400cb48b48adb9b7f7bb31b8 Mon Sep 17 00:00:00 2001 From: Li Shaohua Date: Thu, 7 Dec 2006 20:56:41 +0800 Subject: ACPI: add acpi_bus_ops in acpi_device Add acpi_bus_ops in acpi_device to support acpi hot plug. NOTE: Two methods .add and .start in acpi_driver.ops are called separately to probe ACPI devices, while only .probe method is called in driver model. As executing .add and .start separately is critical for ACPI device hot plug, we use acpi_bus_ops to distinguish different code path. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 598fab35281..8976dbea63c 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -300,6 +300,7 @@ struct acpi_device { struct acpi_driver *driver; void *driver_data; struct device dev; + struct acpi_bus_ops bus_ops; /* workaround for different code path for hotplug */ }; #define acpi_driver_data(d) ((d)->driver_data) -- cgit v1.2.3 From 96333578b023957537c3e98b50af7f3b7e08e411 Mon Sep 17 00:00:00 2001 From: Li Shaohua Date: Thu, 7 Dec 2006 20:56:46 +0800 Subject: ACPI: add acpi_bus_removal_type in acpi_device Add removal_type in structure acpi_device for hot removal. ACPI_BUS_REMOVAL_EJECT is used for ACPI device hot removal. Only one parameter is allowed in .remove method due to driver model. So removal_type is added to indicate different removal type. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 8976dbea63c..58dc8f65186 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -301,6 +301,7 @@ struct acpi_device { void *driver_data; struct device dev; struct acpi_bus_ops bus_ops; /* workaround for different code path for hotplug */ + enum acpi_bus_removal_type removal_type; /* indicate for different removal type */ }; #define acpi_driver_data(d) ((d)->driver_data) -- cgit v1.2.3 From ae8433324be16673c75951986dcf85f29c090557 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 7 Dec 2006 20:57:10 +0800 Subject: ACPI: Set fake hid for non-PNPID ACPI devices We do this mainly because: 1. hid is used to match ACPI devices and drivers. .match method which is incompatible to driver model can be deleted from acpi_driver.ops then. 2. As the .uevent method mark ACPI drivers by PNPID, fake hid is set to non-PNPID devices so that udev script can load the right ACPI driver by looking for "HWID = " or "COMPTID = ". Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 6 +----- include/acpi/acpi_drivers.h | 2 ++ 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 58dc8f65186..a6b4037beea 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -97,8 +97,6 @@ typedef int (*acpi_op_resume) (struct acpi_device * device); typedef int (*acpi_op_scan) (struct acpi_device * device); typedef int (*acpi_op_bind) (struct acpi_device * device); typedef int (*acpi_op_unbind) (struct acpi_device * device); -typedef int (*acpi_op_match) (struct acpi_device * device, - struct acpi_driver * driver); typedef int (*acpi_op_shutdown) (struct acpi_device * device); struct acpi_bus_ops { @@ -112,9 +110,8 @@ struct acpi_bus_ops { u32 acpi_op_scan:1; u32 acpi_op_bind:1; u32 acpi_op_unbind:1; - u32 acpi_op_match:1; u32 acpi_op_shutdown:1; - u32 reserved:20; + u32 reserved:21; }; struct acpi_device_ops { @@ -128,7 +125,6 @@ struct acpi_device_ops { acpi_op_scan scan; acpi_op_bind bind; acpi_op_unbind unbind; - acpi_op_match match; acpi_op_shutdown shutdown; }; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 6a5bdcefec6..be67750ec88 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -43,6 +43,8 @@ #define ACPI_BUTTON_HID_POWERF "ACPI_FPB" #define ACPI_BUTTON_HID_SLEEPF "ACPI_FSB" +#define ACPI_VIDEO_HID "ACPI_VID" +#define ACPI_PCI_BRIDGE_HID "ACPI_PCI" /* -------------------------------------------------------------------------- PCI -------------------------------------------------------------------------- */ -- cgit v1.2.3 From a08727bae727fc2ca3a6ee9506d77786b71070b3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Dec 2006 09:53:50 -0800 Subject: Make workqueue bit operations work on "atomic_long_t" On architectures where the atomicity of the bit operations is handled by external means (ie a separate spinlock to protect concurrent accesses), just doing a direct assignment on the workqueue data field (as done by commit 4594bf159f1962cec3b727954b7c598b07e2e737) can cause the assignment to be lost due to lack of serialization with the bitops on the same word. So we need to serialize the assignment with the locks on those architectures (notably older ARM chips, PA-RISC and sparc32). So rather than using an "unsigned long", let's use "atomic_long_t", which already has a safe assignment operation (atomic_long_set()) on such architectures. This requires that the atomic operations use the same atomicity locks as the bit operations do, but that is largely the case anyway. Sparc32 will probably need fixing. Architectures (including modern ARM with LL/SC) that implement sane atomic operations for SMP won't see any of this matter. Cc: Russell King Cc: David Howells Cc: David Miller Cc: Matthew Wilcox Cc: Linux Arch Maintainers Cc: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/workqueue.h | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 5b13dcf0271..2a7b38d8701 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -8,16 +8,21 @@ #include #include #include +#include struct workqueue_struct; struct work_struct; typedef void (*work_func_t)(struct work_struct *work); +/* + * The first word is the work queue pointer and the flags rolled into + * one + */ +#define work_data_bits(work) ((unsigned long *)(&(work)->data)) + struct work_struct { - /* the first word is the work queue pointer and the flags rolled into - * one */ - unsigned long management; + atomic_long_t data; #define WORK_STRUCT_PENDING 0 /* T if work item pending execution */ #define WORK_STRUCT_NOAUTOREL 1 /* F if work item automatically released on exec */ #define WORK_STRUCT_FLAG_MASK (3UL) @@ -26,6 +31,9 @@ struct work_struct { work_func_t func; }; +#define WORK_DATA_INIT(autorelease) \ + ATOMIC_LONG_INIT((autorelease) << WORK_STRUCT_NOAUTOREL) + struct delayed_work { struct work_struct work; struct timer_list timer; @@ -36,13 +44,13 @@ struct execute_work { }; #define __WORK_INITIALIZER(n, f) { \ - .management = 0, \ + .data = WORK_DATA_INIT(0), \ .entry = { &(n).entry, &(n).entry }, \ .func = (f), \ } #define __WORK_INITIALIZER_NAR(n, f) { \ - .management = (1 << WORK_STRUCT_NOAUTOREL), \ + .data = WORK_DATA_INIT(1), \ .entry = { &(n).entry, &(n).entry }, \ .func = (f), \ } @@ -82,17 +90,21 @@ struct execute_work { /* * initialize all of a work item in one go + * + * NOTE! No point in using "atomic_long_set()": useing a direct + * assignment of the work data initializer allows the compiler + * to generate better code. */ #define INIT_WORK(_work, _func) \ do { \ - (_work)->management = 0; \ + (_work)->data = (atomic_long_t) WORK_DATA_INIT(0); \ INIT_LIST_HEAD(&(_work)->entry); \ PREPARE_WORK((_work), (_func)); \ } while (0) #define INIT_WORK_NAR(_work, _func) \ do { \ - (_work)->management = (1 << WORK_STRUCT_NOAUTOREL); \ + (_work)->data = (atomic_long_t) WORK_DATA_INIT(1); \ INIT_LIST_HEAD(&(_work)->entry); \ PREPARE_WORK((_work), (_func)); \ } while (0) @@ -114,7 +126,7 @@ struct execute_work { * @work: The work item in question */ #define work_pending(work) \ - test_bit(WORK_STRUCT_PENDING, &(work)->management) + test_bit(WORK_STRUCT_PENDING, work_data_bits(work)) /** * delayed_work_pending - Find out whether a delayable work item is currently @@ -143,7 +155,7 @@ struct execute_work { * This should also be used to release a delayed work item. */ #define work_release(work) \ - clear_bit(WORK_STRUCT_PENDING, &(work)->management) + clear_bit(WORK_STRUCT_PENDING, work_data_bits(work)) extern struct workqueue_struct *__create_workqueue(const char *name, @@ -188,7 +200,7 @@ static inline int cancel_delayed_work(struct delayed_work *work) ret = del_timer_sync(&work->timer); if (ret) - clear_bit(WORK_STRUCT_PENDING, &work->work.management); + work_release(&work->work); return ret; } -- cgit v1.2.3 From 5a059f1ac0ed0c937257027aed5da50241f5ec2b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 Dec 2006 18:23:10 +0000 Subject: [ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King --- include/asm-arm/unistd.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index 32b06eb5281..97e7060000c 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -360,6 +360,18 @@ #define __NR_readlinkat (__NR_SYSCALL_BASE+332) #define __NR_fchmodat (__NR_SYSCALL_BASE+333) #define __NR_faccessat (__NR_SYSCALL_BASE+334) + /* 335 for pselect6 */ + /* 336 for ppoll */ +#define __NR_unshare (__NR_SYSCALL_BASE+337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) +#define __NR_splice (__NR_SYSCALL_BASE+340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#define __NR_tee (__NR_SYSCALL_BASE+342) +#define __NR_vmsplice (__NR_SYSCALL_BASE+343) +#define __NR_move_pages (__NR_SYSCALL_BASE+344) +#define __NR_getcpu (__NR_SYSCALL_BASE+345) + /* 346 for epoll_pwait */ /* * The following SWIs are ARM private. -- cgit v1.2.3 From 729e7d7e4dc6b905e40992b6439b07153db4bd63 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 12 Dec 2006 00:59:12 -0800 Subject: [SPARC64]: Minor irq handling cleanups. Use struct irq_chip instead of hw_interrupt_type. Delete hw_resend_irq(), totally unused. Signed-off-by: David S. Miller --- include/asm-sparc64/hw_irq.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-sparc64/hw_irq.h b/include/asm-sparc64/hw_irq.h index 599b3b07345..8e44a836082 100644 --- a/include/asm-sparc64/hw_irq.h +++ b/include/asm-sparc64/hw_irq.h @@ -1,6 +1,4 @@ #ifndef __ASM_SPARC64_HW_IRQ_H #define __ASM_SPARC64_HW_IRQ_H -extern void hw_resend_irq(struct hw_interrupt_type *handler, unsigned int virt_irq); - #endif -- cgit v1.2.3 From 5a089006bf8b59f6610de11a857854d8f8730658 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 14 Dec 2006 23:40:57 -0800 Subject: [SPARC64]: Mirror x86_64's PERCPU_ENOUGH_ROOM definition. Signed-off-by: David S. Miller --- include/asm-sparc64/percpu.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/asm-sparc64/percpu.h b/include/asm-sparc64/percpu.h index ced8cbde046..0d3df76aa47 100644 --- a/include/asm-sparc64/percpu.h +++ b/include/asm-sparc64/percpu.h @@ -5,6 +5,16 @@ #ifdef CONFIG_SMP +#ifdef CONFIG_MODULES +# define PERCPU_MODULE_RESERVE 8192 +#else +# define PERCPU_MODULE_RESERVE 0 +#endif + +#define PERCPU_ENOUGH_ROOM \ + (ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \ + PERCPU_MODULE_RESERVE) + extern void setup_per_cpu_areas(void); extern unsigned long __per_cpu_base; -- cgit v1.2.3 From f056076ea727f7c291daf17da4ae25af474f0c67 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 Dec 2006 19:59:20 +0100 Subject: [ARM] 4038/1: S3C24XX: Fix copyrights in include/asm-arm/arch-s3c2410 (core) Fix copyright notices in include/asm-arm/arch-s3c2410 to actually have `Copyright` in the line. This patch deals with all the core files. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/audio.h | 2 +- include/asm-arm/arch-s3c2410/hardware.h | 4 ++-- include/asm-arm/arch-s3c2410/iic.h | 2 +- include/asm-arm/arch-s3c2410/leds-gpio.h | 2 +- include/asm-arm/arch-s3c2410/map.h | 4 ++-- include/asm-arm/arch-s3c2410/nand.h | 4 ++-- include/asm-arm/arch-s3c2410/system.h | 4 ++-- include/asm-arm/arch-s3c2410/timex.h | 4 ++-- include/asm-arm/arch-s3c2410/uncompress.h | 4 ++-- include/asm-arm/arch-s3c2410/usb-control.h | 4 ++-- 10 files changed, 17 insertions(+), 17 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h index 7e0222276c9..65e0acffa1a 100644 --- a/include/asm-arm/arch-s3c2410/audio.h +++ b/include/asm-arm/arch-s3c2410/audio.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/audio.h * - * (c) 2004-2005 Simtec Electronics + * Copyright (c) 2004-2005 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ * Ben Dooks * diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h index 871f8af09b8..729565e5cdf 100644 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/hardware.h * - * (c) 2003 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks * * S3C2410 - hardware * diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/arch-s3c2410/iic.h index ed3d6c7bf6d..71211c8b538 100644 --- a/include/asm-arm/arch-s3c2410/iic.h +++ b/include/asm-arm/arch-s3c2410/iic.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/iic.h * - * (c) 2004 Simtec Electronics + * Copyright (c) 2004 Simtec Electronics * Ben Dooks * * S3C2410 - I2C Controller platfrom_device info diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h index f07ed040622..800846ebddb 100644 --- a/include/asm-arm/arch-s3c2410/leds-gpio.h +++ b/include/asm-arm/arch-s3c2410/leds-gpio.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/leds-gpio.h * - * (c) 2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 7895042d176..4ef4eebf42b 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/map.h * - * (c) 2003 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks * * S3C2410 - Memory map definitions * diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/arch-s3c2410/nand.h index e350ae2acfc..8816f7f9cee 100644 --- a/include/asm-arm/arch-s3c2410/nand.h +++ b/include/asm-arm/arch-s3c2410/nand.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/nand.h * - * (c) 2004 Simtec Electronics - * Ben Dooks + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks * * S3C2410 - NAND device controller platfrom_device info * diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 4f72a853a5c..ecf250db45f 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/system.h * - * (c) 2003 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks * * S3C2410 - System function defines and includes * diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h index 703c337c561..c16a99c5a59 100644 --- a/include/asm-arm/arch-s3c2410/timex.h +++ b/include/asm-arm/arch-s3c2410/timex.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/timex.h * - * (c) 2003-2005 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks * * S3C2410 - time parameters * diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 81b3e91c56a..69551ffb4f8 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/uncompress.h * - * (c) 2003 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks * * S3C2410 - uncompress code * diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h index 35723569a17..5bfa376e33d 100644 --- a/include/asm-arm/arch-s3c2410/usb-control.h +++ b/include/asm-arm/arch-s3c2410/usb-control.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/usb-control.h * - * (c) 2004 Simtec Electronics - * Ben Dooks + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks * * S3C2410 - usb port information * -- cgit v1.2.3 From 9d6be125ba8b7cd3af4832094bf3643e09d6e39b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 Dec 2006 20:02:01 +0100 Subject: [ARM] 4039/1: S3C24XX: Fix copyrights in include/asm-arm/arch-s3c2410 (mach) Fix copyright notices in include/asm-arm/arch-s3c2410 to actually have `Copyright` in the line. This patch deals with all the core files. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/anubis-cpld.h | 2 +- include/asm-arm/arch-s3c2410/anubis-irq.h | 2 +- include/asm-arm/arch-s3c2410/anubis-map.h | 2 +- include/asm-arm/arch-s3c2410/bast-cpld.h | 4 ++-- include/asm-arm/arch-s3c2410/bast-irq.h | 4 ++-- include/asm-arm/arch-s3c2410/bast-map.h | 4 ++-- include/asm-arm/arch-s3c2410/bast-pmu.h | 2 +- include/asm-arm/arch-s3c2410/h1940-latch.h | 2 +- include/asm-arm/arch-s3c2410/osiris-cpld.h | 2 +- include/asm-arm/arch-s3c2410/vr1000-cpld.h | 4 ++-- include/asm-arm/arch-s3c2410/vr1000-irq.h | 4 ++-- include/asm-arm/arch-s3c2410/vr1000-map.h | 4 ++-- 12 files changed, 18 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h index 40e8e270d33..dcebf6d6190 100644 --- a/include/asm-arm/arch-s3c2410/anubis-cpld.h +++ b/include/asm-arm/arch-s3c2410/anubis-cpld.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h * - * (c) 2005 Simtec Electronics + * Copyright (c) 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks * diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h index 4b5f423779d..cd77a70d45c 100644 --- a/include/asm-arm/arch-s3c2410/anubis-irq.h +++ b/include/asm-arm/arch-s3c2410/anubis-irq.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/anubis-irq.h * - * (c) 2005 Simtec Electronics + * Copyright (c) 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks * diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h index 058a2104b03..ab076de4a0d 100644 --- a/include/asm-arm/arch-s3c2410/anubis-map.h +++ b/include/asm-arm/arch-s3c2410/anubis-map.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/anubis-map.h * - * (c) 2005 Simtec Electronics + * Copyright (c) 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks * diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h index 8969cffe83f..034d2c5a47c 100644 --- a/include/asm-arm/arch-s3c2410/bast-cpld.h +++ b/include/asm-arm/arch-s3c2410/bast-cpld.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/bast-cpld.h * - * (c) 2003,2004 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks * * BAST - CPLD control constants * diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h index 15ffa66f501..726c0466f85 100644 --- a/include/asm-arm/arch-s3c2410/bast-irq.h +++ b/include/asm-arm/arch-s3c2410/bast-irq.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/bast-irq.h * - * (c) 2003,2004 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks * * Machine BAST - IRQ Number definitions * diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h index 727cef84c70..86ac1c108db 100644 --- a/include/asm-arm/arch-s3c2410/bast-map.h +++ b/include/asm-arm/arch-s3c2410/bast-map.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/bast-map.h * - * (c) 2003,2004 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks * * Machine BAST - Memory map definitions * diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h index 82836027f00..37a11fe54a7 100644 --- a/include/asm-arm/arch-s3c2410/bast-pmu.h +++ b/include/asm-arm/arch-s3c2410/bast-pmu.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/bast-pmu.h * - * (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003,2004 Simtec Electronics * Ben Dooks * Vincent Sanders * diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h index c5802411f43..22a7efd358f 100644 --- a/include/asm-arm/arch-s3c2410/h1940-latch.h +++ b/include/asm-arm/arch-s3c2410/h1940-latch.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/h1940-latch.h * - * (c) 2005 Simtec Electronics + * Copyright (c) 2005 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h index e9d1ae1f354..3b6498468d6 100644 --- a/include/asm-arm/arch-s3c2410/osiris-cpld.h +++ b/include/asm-arm/arch-s3c2410/osiris-cpld.h @@ -1,6 +1,6 @@ /* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h * - * (c) 2005 Simtec Electronics + * Copyright (c) 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks * diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h index a341b1e1bd9..0557b0a5ab1 100644 --- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h +++ b/include/asm-arm/arch-s3c2410/vr1000-cpld.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h * - * (c) 2003 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks * * VR1000 - CPLD control constants * diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h index c39a0ffa670..890937083c6 100644 --- a/include/asm-arm/arch-s3c2410/vr1000-irq.h +++ b/include/asm-arm/arch-s3c2410/vr1000-irq.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h * - * (c) 2003,2004 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks * * Machine VR1000 - IRQ Number definitions * diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h index 1fe4db36c83..92a56a724a8 100644 --- a/include/asm-arm/arch-s3c2410/vr1000-map.h +++ b/include/asm-arm/arch-s3c2410/vr1000-map.h @@ -1,7 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/vr1000-map.h * - * (c) 2003-2005 Simtec Electronics - * Ben Dooks + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks * * Machine VR1000 - Memory map definitions * -- cgit v1.2.3 From cdcb38352b6cf97241d4c3969f93f792026d18cc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 Dec 2006 20:15:13 +0100 Subject: [ARM] 4041/1: S3C24XX: Fix sparse errors from VA addresses Fix address-space conversion errors from passing addresses generated from include/asm-arm/arch-s3c2410/map.h by adding an __force argument to the `void __iomem *` for all the virtual addresses. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/map.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 4ef4eebf42b..6746114e1a2 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -25,7 +25,7 @@ */ #ifndef __ASSEMBLY__ -#define S3C2410_ADDR(x) ((void __iomem *)0xF0000000 + (x)) +#define S3C2410_ADDR(x) ((void __iomem __force *)0xF0000000 + (x)) #else #define S3C2410_ADDR(x) (0xF0000000 + (x)) #endif -- cgit v1.2.3 From 2d8c1cef84dcba462e1806c1223aecd97df33f99 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 Dec 2006 20:18:40 +0100 Subject: [ARM] 4042/1: H1940: Fix sparse errors from VA addresses Fix address-space conversion errors from passing addresses generated from include/asm-arm/arch-s3c2410/map.h by adding an __force argument to the `void __iomem *` for all the virtual addresses. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/h1940-latch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h index 22a7efd358f..c3de5ab102e 100644 --- a/include/asm-arm/arch-s3c2410/h1940-latch.h +++ b/include/asm-arm/arch-s3c2410/h1940-latch.h @@ -16,7 +16,7 @@ #ifndef __ASSEMBLY__ -#define H1940_LATCH ((void __iomem *)0xF8000000) +#define H1940_LATCH ((void __force __iomem *)0xF8000000) #else #define H1940_LATCH 0xF8000000 #endif -- cgit v1.2.3 From 58d19d6ea608077e83c30e58ae1494246b1f6b82 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 Dec 2006 20:50:55 +0100 Subject: [ARM] 4045/1: S3C24XX: remove old VA for non-shared areas Remove old (and non-shared) VA addresses from the mappings in arch/arm/mach-s3c2410/map.h and anywhere they are being mapped in arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/map.h | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 6746114e1a2..4505aefbad1 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -47,73 +47,65 @@ #define S3C24XX_SZ_MEMCTRL SZ_1M /* USB host controller */ -#define S3C24XX_VA_USBHOST S3C2410_ADDR(0x00200000) #define S3C2400_PA_USBHOST (0x14200000) #define S3C2410_PA_USBHOST (0x49000000) #define S3C24XX_SZ_USBHOST SZ_1M /* DMA controller */ -#define S3C24XX_VA_DMA S3C2410_ADDR(0x00300000) #define S3C2400_PA_DMA (0x14600000) #define S3C2410_PA_DMA (0x4B000000) #define S3C24XX_SZ_DMA SZ_1M /* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00400000) +#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00200000) #define S3C2400_PA_CLKPWR (0x14800000) #define S3C2410_PA_CLKPWR (0x4C000000) #define S3C24XX_SZ_CLKPWR SZ_1M /* LCD controller */ -#define S3C24XX_VA_LCD S3C2410_ADDR(0x00600000) +#define S3C24XX_VA_LCD S3C2410_ADDR(0x00300000) #define S3C2400_PA_LCD (0x14A00000) #define S3C2410_PA_LCD (0x4D000000) #define S3C24XX_SZ_LCD SZ_1M /* NAND flash controller */ -#define S3C24XX_VA_NAND S3C2410_ADDR(0x00700000) #define S3C2410_PA_NAND (0x4E000000) #define S3C24XX_SZ_NAND SZ_1M /* MMC controller - available on the S3C2400 */ -#define S3C2400_VA_MMC S3C2400_ADDR(0x00700000) #define S3C2400_PA_MMC (0x15A00000) #define S3C2400_SZ_MMC SZ_1M /* UARTs */ -#define S3C24XX_VA_UART S3C2410_ADDR(0x00800000) +#define S3C24XX_VA_UART S3C2410_ADDR(0x00400000) #define S3C2400_PA_UART (0x15000000) #define S3C2410_PA_UART (0x50000000) #define S3C24XX_SZ_UART SZ_1M /* Timers */ -#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00900000) +#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00500000) #define S3C2400_PA_TIMER (0x15100000) #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M /* USB Device port */ -#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00A00000) +#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00600000) #define S3C2400_PA_USBDEV (0x15200140) #define S3C2410_PA_USBDEV (0x52000000) #define S3C24XX_SZ_USBDEV SZ_1M /* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00B00000) +#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000) #define S3C2400_PA_WATCHDOG (0x15300000) #define S3C2410_PA_WATCHDOG (0x53000000) #define S3C24XX_SZ_WATCHDOG SZ_1M /* IIC hardware controller */ -#define S3C24XX_VA_IIC S3C2410_ADDR(0x00C00000) #define S3C2400_PA_IIC (0x15400000) #define S3C2410_PA_IIC (0x54000000) #define S3C24XX_SZ_IIC SZ_1M -#define VA_IIC_BASE (S3C24XX_VA_IIC) - /* IIS controller */ -#define S3C24XX_VA_IIS S3C2410_ADDR(0x00D00000) #define S3C2400_PA_IIS (0x15508000) #define S3C2410_PA_IIS (0x55000000) #define S3C24XX_SZ_IIS SZ_1M @@ -134,25 +126,21 @@ #define S3C24XX_SZ_GPIO SZ_1M /* RTC */ -#define S3C24XX_VA_RTC S3C2410_ADDR(0x00F00000) #define S3C2400_PA_RTC (0x15700040) #define S3C2410_PA_RTC (0x57000000) #define S3C24XX_SZ_RTC SZ_1M /* ADC */ -#define S3C24XX_VA_ADC S3C2410_ADDR(0x01000000) #define S3C2400_PA_ADC (0x15800000) #define S3C2410_PA_ADC (0x58000000) #define S3C24XX_SZ_ADC SZ_1M /* SPI */ -#define S3C24XX_VA_SPI S3C2410_ADDR(0x01100000) #define S3C2400_PA_SPI (0x15900000) #define S3C2410_PA_SPI (0x59000000) #define S3C24XX_SZ_SPI SZ_1M /* SDI */ -#define S3C24XX_VA_SDI S3C2410_ADDR(0x01200000) #define S3C2410_PA_SDI (0x5A000000) #define S3C24XX_SZ_SDI SZ_1M -- cgit v1.2.3 From b6d1f542e3f44f8988b601e3ca6277c143282179 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 Dec 2006 23:22:26 +0100 Subject: [ARM] 4049/1: S3C24XX: fix sparse warning due to upf_t in regs-serial.h Change the include/asm-arm/arch-s3c2410/regs-serial.h platform data to use the prorper type (upf_t) for the uart_flags. Fix all the other parts of arch/arm/mach-s3c2410 to include and all other uses of the include file. mach-rx3715.c:101:18: warning: incorrect type in initializer (different base types) mach-rx3715.c:101:18: expected unsigned long [unsigned] uart_flags mach-rx3715.c:101:18: got restricted unsigned int [usertype] [force] Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-serial.h | 2 +- include/asm-arm/arch-s3c2410/uncompress.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h index 19c77da9c3f..46f52401d13 100644 --- a/include/asm-arm/arch-s3c2410/regs-serial.h +++ b/include/asm-arm/arch-s3c2410/regs-serial.h @@ -197,7 +197,7 @@ struct s3c2410_uartcfg { unsigned char hwport; /* hardware port number */ unsigned char unused; unsigned short flags; - unsigned long uart_flags; /* default uart flags */ + upf_t uart_flags; /* default uart flags */ unsigned long ucon; /* value of ucon for port */ unsigned long ulcon; /* value of ulcon for port */ diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 69551ffb4f8..dcb2cef38f5 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ /* defines for UART registers */ #include "asm/arch/regs-serial.h" -- cgit v1.2.3 From 255d1f8639f5877381545d0da6821079ebad1c21 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 18 Dec 2006 00:12:47 +0000 Subject: [ARM] Fix warnings from asm/system.h Move adjust_cr() into arch/arm/mm/mmu.c, and move irqflags.h to a more appropriate place in the header file. Signed-off-by: Russell King --- include/asm-arm/system.h | 33 ++++++++------------------------- 1 file changed, 8 insertions(+), 25 deletions(-) (limited to 'include') diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index e160aeb0138..aa223fc546a 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -73,6 +73,7 @@ #ifndef __ASSEMBLY__ #include +#include struct thread_info; struct task_struct; @@ -139,6 +140,9 @@ static inline int cpu_is_xsc3(void) #define cpu_is_xscale() 1 #endif +extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ +extern unsigned long cr_alignment; /* defined in entry-armv.S */ + static inline unsigned int get_cr(void) { unsigned int val; @@ -152,6 +156,10 @@ static inline void set_cr(unsigned int val) : : "r" (val) : "cc"); } +#ifndef CONFIG_SMP +extern void adjust_cr(unsigned long mask, unsigned long set); +#endif + #define CPACC_FULL(n) (3 << (n * 2)) #define CPACC_SVC(n) (1 << (n * 2)) #define CPACC_DISABLE(n) (0 << (n * 2)) @@ -170,29 +178,6 @@ static inline void set_copro_access(unsigned int val) : : "r" (val) : "cc"); } -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ -extern unsigned long cr_alignment; /* defined in entry-armv.S */ - -#ifndef CONFIG_SMP -static inline void adjust_cr(unsigned long mask, unsigned long set) -{ - unsigned long flags, cr; - - mask &= ~CR_A; - - set &= mask; - - local_irq_save(flags); - - cr_no_alignment = (cr_no_alignment & ~mask) | set; - cr_alignment = (cr_alignment & ~mask) | set; - - set_cr((get_cr() & ~mask) | set); - - local_irq_restore(flags); -} -#endif - #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) #define UDBG_BADABORT (1 << 2) @@ -248,8 +233,6 @@ static inline void sched_cacheflush(void) { } -#include - #ifdef CONFIG_SMP #define smp_mb() mb() -- cgit v1.2.3 From 99e4a6dda9dc4b863773c0a5857b762474b817cf Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Dec 2006 00:59:10 +0100 Subject: [ARM] 4054/1: ep93xx: add HWCAP_CRUNCH Add HWCAP_CRUNCH so that the dynamic linker knows whether it can use Crunch-optimised libraries or not. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/elf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index 642382d2c9f..3679a8a8922 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -52,6 +52,7 @@ typedef struct user_fp elf_fpregset_t; #define HWCAP_EDSP 128 #define HWCAP_JAVA 256 #define HWCAP_IWMMXT 512 +#define HWCAP_CRUNCH 1024 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ -- cgit v1.2.3 From 6d2e857d02a59332b7cd89aeac8b5962a357ac7a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Dec 2006 01:01:08 +0100 Subject: [ARM] 4055/1: iop13xx: fix phys_io/io_pg_offst for iq81340mc/sc The phys_io/io_pg_offst machine record variables were being set to bogus values, causing problems when enabling DEBUG_LL. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-iop13xx/iq81340.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/include/asm-arm/arch-iop13xx/iq81340.h index b98f8f109c2..ba2cf931e9c 100644 --- a/include/asm-arm/arch-iop13xx/iq81340.h +++ b/include/asm-arm/arch-iop13xx/iq81340.h @@ -24,8 +24,5 @@ #define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH) #define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1) -/* These are the values used in the Machine description */ -#define PHYS_IO 0xfeffff00 -#define IO_PG_OFFSET 0xffffff00 -#define BOOT_PARAM_OFFSET 0x00000100 + #endif /* _IQ81340_H_ */ -- cgit v1.2.3 From c041ffb36407897bbc3b7bf87d1fa856ce085cdf Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 18 Dec 2006 01:04:09 +0100 Subject: [ARM] 4057/1: ixp23xx: unconditionally enable hardware coherency On ixp23xx, it was thought to be necessary to disable coherency to work around certain silicon errata. This turns out not to be the case -- none of the documented errata workarounds require disabling coherency, and disabling coherency does not work around any existing errata. Furthermore, all ixp23xx models do support coherency, so we should just unconditionally enable coherency for all ixp23xx. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-ixp23xx/memory.h | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h index c85fc06a043..6d859d742d7 100644 --- a/include/asm-arm/arch-ixp23xx/memory.h +++ b/include/asm-arm/arch-ixp23xx/memory.h @@ -41,21 +41,7 @@ data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \ __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); }) -/* - * Coherency support. Only supported on A2 CPUs or on A1 - * systems that have the cache coherency workaround. - */ -static inline int __ixp23xx_arch_is_coherent(void) -{ - extern unsigned int processor_id; - - if (((processor_id & 15) >= 4) || machine_is_roadrunner()) - return 1; - - return 0; -} - -#define arch_is_coherent() __ixp23xx_arch_is_coherent() +#define arch_is_coherent() 1 #endif -- cgit v1.2.3 From 8a8b836b91aa170a383f2f360b73d3d23160d9d7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 17 Dec 2006 16:18:47 -0800 Subject: [SPARC]: Make bitops use same spinlocks as atomics. Recent workqueue changes basically make this a formal requirement. Also, move atomic32.o from lib-y to obj-y since it exports symbols to modules. Signed-off-by: David S. Miller --- include/asm-sparc/bitops.h | 100 ++++++++------------------------------------- 1 file changed, 16 insertions(+), 84 deletions(-) (limited to 'include') diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h index 04aa3318f76..329e696e775 100644 --- a/include/asm-sparc/bitops.h +++ b/include/asm-sparc/bitops.h @@ -14,6 +14,10 @@ #ifdef __KERNEL__ +extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask); +extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask); +extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask); + /* * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0' * is in the highest of the four bytes and bit '31' is the high bit @@ -22,134 +26,62 @@ */ static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { - register unsigned long mask asm("g2"); - register unsigned long *ADDR asm("g1"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g5"); - register int tmp4 asm("g7"); + unsigned long *ADDR, mask; ADDR = ((unsigned long *) addr) + (nr >> 5); mask = 1 << (nr & 31); - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___set_bit\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) - : "0" (mask), "r" (ADDR) - : "memory", "cc"); - - return mask != 0; + return ___set_bit(ADDR, mask) != 0; } static inline void set_bit(unsigned long nr, volatile unsigned long *addr) { - register unsigned long mask asm("g2"); - register unsigned long *ADDR asm("g1"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g5"); - register int tmp4 asm("g7"); + unsigned long *ADDR, mask; ADDR = ((unsigned long *) addr) + (nr >> 5); mask = 1 << (nr & 31); - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___set_bit\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) - : "0" (mask), "r" (ADDR) - : "memory", "cc"); + (void) ___set_bit(ADDR, mask); } static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - register unsigned long mask asm("g2"); - register unsigned long *ADDR asm("g1"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g5"); - register int tmp4 asm("g7"); + unsigned long *ADDR, mask; ADDR = ((unsigned long *) addr) + (nr >> 5); mask = 1 << (nr & 31); - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___clear_bit\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) - : "0" (mask), "r" (ADDR) - : "memory", "cc"); - - return mask != 0; + return ___clear_bit(ADDR, mask) != 0; } static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) { - register unsigned long mask asm("g2"); - register unsigned long *ADDR asm("g1"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g5"); - register int tmp4 asm("g7"); + unsigned long *ADDR, mask; ADDR = ((unsigned long *) addr) + (nr >> 5); mask = 1 << (nr & 31); - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___clear_bit\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) - : "0" (mask), "r" (ADDR) - : "memory", "cc"); + (void) ___clear_bit(ADDR, mask); } static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - register unsigned long mask asm("g2"); - register unsigned long *ADDR asm("g1"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g5"); - register int tmp4 asm("g7"); + unsigned long *ADDR, mask; ADDR = ((unsigned long *) addr) + (nr >> 5); mask = 1 << (nr & 31); - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___change_bit\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) - : "0" (mask), "r" (ADDR) - : "memory", "cc"); - - return mask != 0; + return ___change_bit(ADDR, mask) != 0; } static inline void change_bit(unsigned long nr, volatile unsigned long *addr) { - register unsigned long mask asm("g2"); - register unsigned long *ADDR asm("g1"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g5"); - register int tmp4 asm("g7"); + unsigned long *ADDR, mask; ADDR = ((unsigned long *) addr) + (nr >> 5); mask = 1 << (nr & 31); - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___change_bit\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4) - : "0" (mask), "r" (ADDR) - : "memory", "cc"); + (void) ___change_bit(ADDR, mask); } #include -- cgit v1.2.3 From c9266b99e2def0a456766220df09713f8e765891 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 14 Dec 2006 15:49:28 -0800 Subject: [AX.25]: Mark all kmalloc users __must_check The recent fix 0506d4068bad834aab1141b5dc5e748eb175c6b3 made obvious that error values were not being propagated through the AX.25 stack. To help with that this patch marks all kmalloc users in the AX.25, NETROM and ROSE stacks as __must_check. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/ax25.h | 11 ++++++----- include/net/rose.h | 4 ++-- 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/net/ax25.h b/include/net/ax25.h index 14b72d868f0..ced202f0729 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -277,7 +277,7 @@ struct sock *ax25_get_socket(ax25_address *, ax25_address *, int); extern ax25_cb *ax25_find_cb(ax25_address *, ax25_address *, ax25_digi *, struct net_device *); extern void ax25_send_to_raw(ax25_address *, struct sk_buff *, int); extern void ax25_destroy_socket(ax25_cb *); -extern ax25_cb *ax25_create_cb(void); +extern ax25_cb * __must_check ax25_create_cb(void); extern void ax25_fillin_cb(ax25_cb *, ax25_dev *); extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *); @@ -333,11 +333,12 @@ extern void ax25_ds_t3timer_expiry(ax25_cb *); extern void ax25_ds_idletimer_expiry(ax25_cb *); /* ax25_iface.c */ -extern int ax25_protocol_register(unsigned int, int (*)(struct sk_buff *, ax25_cb *)); +extern int __must_check ax25_protocol_register(unsigned int, int (*)(struct sk_buff *, ax25_cb *)); extern void ax25_protocol_release(unsigned int); -extern int ax25_linkfail_register(void (*)(ax25_cb *, int)); +extern int __must_check ax25_linkfail_register(void (*)(ax25_cb *, int)); extern void ax25_linkfail_release(void (*)(ax25_cb *, int)); -extern int ax25_listen_register(ax25_address *, struct net_device *); +extern int __must_check ax25_listen_register(ax25_address *, + struct net_device *); extern void ax25_listen_release(ax25_address *, struct net_device *); extern int (*ax25_protocol_function(unsigned int))(struct sk_buff *, ax25_cb *); extern int ax25_listen_mine(ax25_address *, struct net_device *); @@ -415,7 +416,7 @@ extern unsigned long ax25_display_timer(struct timer_list *); /* ax25_uid.c */ extern int ax25_uid_policy; extern ax25_uid_assoc *ax25_findbyuid(uid_t); -extern int ax25_uid_ioctl(int, struct sockaddr_ax25 *); +extern int __must_check ax25_uid_ioctl(int, struct sockaddr_ax25 *); extern struct file_operations ax25_uid_fops; extern void ax25_uid_free(void); diff --git a/include/net/rose.h b/include/net/rose.h index 012b09ed240..0143796a3e3 100644 --- a/include/net/rose.h +++ b/include/net/rose.h @@ -193,8 +193,8 @@ extern struct file_operations rose_neigh_fops; extern struct file_operations rose_nodes_fops; extern struct file_operations rose_routes_fops; -extern int rose_add_loopback_neigh(void); -extern int rose_add_loopback_node(rose_address *); +extern int __must_check rose_add_loopback_neigh(void); +extern int __must_check rose_add_loopback_node(rose_address *); extern void rose_del_loopback_node(rose_address *); extern void rose_rt_device_down(struct net_device *); extern void rose_link_device_down(struct net_device *); -- cgit v1.2.3 From 8d5cf596d10d740b69b5f4bbdb54b85abf75810d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 14 Dec 2006 15:50:01 -0800 Subject: [AX.25]: Fix unchecked ax25_protocol_register uses. Replace ax25_protocol_register by ax25_register_pid which assumes the caller has done the memory allocation. This allows replacing the kmalloc allocations entirely by static allocations. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/ax25.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/ax25.h b/include/net/ax25.h index ced202f0729..51060ef7459 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -333,7 +333,14 @@ extern void ax25_ds_t3timer_expiry(ax25_cb *); extern void ax25_ds_idletimer_expiry(ax25_cb *); /* ax25_iface.c */ -extern int __must_check ax25_protocol_register(unsigned int, int (*)(struct sk_buff *, ax25_cb *)); + +struct ax25_protocol { + struct ax25_protocol *next; + unsigned int pid; + int (*func)(struct sk_buff *, ax25_cb *); +}; + +extern void ax25_register_pid(struct ax25_protocol *ap); extern void ax25_protocol_release(unsigned int); extern int __must_check ax25_linkfail_register(void (*)(ax25_cb *, int)); extern void ax25_linkfail_release(void (*)(ax25_cb *, int)); -- cgit v1.2.3 From a4282717c102aef2bfab1d947c392de4d8abc0ec Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 14 Dec 2006 15:51:23 -0800 Subject: [AX.25]: Fix unchecked ax25_linkfail_register uses ax25_linkfail_register uses kmalloc and the callers were ignoring the error value. Rewrite to let the caller deal with the allocation. This allows the use of static allocation of kmalloc use entirely. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/ax25.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/ax25.h b/include/net/ax25.h index 51060ef7459..5ae10dd2e32 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -342,8 +342,14 @@ struct ax25_protocol { extern void ax25_register_pid(struct ax25_protocol *ap); extern void ax25_protocol_release(unsigned int); -extern int __must_check ax25_linkfail_register(void (*)(ax25_cb *, int)); -extern void ax25_linkfail_release(void (*)(ax25_cb *, int)); + +struct ax25_linkfail { + struct hlist_node lf_node; + void (*func)(ax25_cb *, int); +}; + +extern void ax25_linkfail_register(struct ax25_linkfail *lf); +extern void ax25_linkfail_release(struct ax25_linkfail *lf); extern int __must_check ax25_listen_register(ax25_address *, struct net_device *); extern void ax25_listen_release(ax25_address *, struct net_device *); -- cgit v1.2.3 From a3d384029aa304f8f3f5355d35f0ae274454f7cd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 14 Dec 2006 15:52:13 -0800 Subject: [AX.25]: Fix unchecked rose_add_loopback_neigh uses rose_add_loopback_neigh uses kmalloc and the callers were ignoring the error value. Rewrite to let the caller deal with the allocation. This allows the use of static allocation of kmalloc use entirely. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- include/net/rose.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/rose.h b/include/net/rose.h index 0143796a3e3..4c05a88b921 100644 --- a/include/net/rose.h +++ b/include/net/rose.h @@ -188,12 +188,12 @@ extern void rose_kick(struct sock *); extern void rose_enquiry_response(struct sock *); /* rose_route.c */ -extern struct rose_neigh *rose_loopback_neigh; +extern struct rose_neigh rose_loopback_neigh; extern struct file_operations rose_neigh_fops; extern struct file_operations rose_nodes_fops; extern struct file_operations rose_routes_fops; -extern int __must_check rose_add_loopback_neigh(void); +extern void rose_add_loopback_neigh(void); extern int __must_check rose_add_loopback_node(rose_address *); extern void rose_del_loopback_node(rose_address *); extern void rose_rt_device_down(struct net_device *); -- cgit v1.2.3 From a240d9f1d8e6421cb970632b93e71b2f66c2cd70 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Mon, 18 Dec 2006 01:53:58 -0800 Subject: [CONNECTOR]: Replace delayed work with usual work queue. Signed-off-by: Evgeniy Polyakov Signed-off-by: David S. Miller --- include/linux/connector.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/connector.h b/include/linux/connector.h index 3ea1cd58de9..10eb56b2940 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -133,7 +133,7 @@ struct cn_callback_data { struct cn_callback_entry { struct list_head callback_entry; struct cn_callback *cb; - struct delayed_work work; + struct work_struct work; struct cn_queue_dev *pdev; struct cn_callback_id id; -- cgit v1.2.3 From d5cb8d38cd0029b3573e1c8d5d99d99c86dbdbd6 Mon Sep 17 00:00:00 2001 From: Gabriel Mansi Date: Sat, 16 Dec 2006 20:24:27 -0300 Subject: [AGPGART] K8M890 support for amd-k8. Signed-off-by: Dave Jones --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 95c1e74afeb..5c87cd8a56f 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1273,6 +1273,7 @@ #define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8363_0 0x0305 #define PCI_DEVICE_ID_VIA_P4M800CE 0x0314 +#define PCI_DEVICE_ID_VIA_K8M890CE 0x0336 #define PCI_DEVICE_ID_VIA_8371_0 0x0391 #define PCI_DEVICE_ID_VIA_8501_0 0x0501 #define PCI_DEVICE_ID_VIA_82C561 0x0561 -- cgit v1.2.3 From 1aa4f24fe96938cabe7a1e9da8bc3bfbd1dfe3fa Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Dec 2006 08:33:11 +0100 Subject: [PATCH] Remove queue merging hooks We have full flexibility of merging parameters now, so we can remove the hooks that define back/front/request merge strategies. Nobody is using them anymore. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ea330d7b46c..0fa33017ec0 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -331,10 +331,6 @@ struct request_pm_state #include -typedef int (merge_request_fn) (request_queue_t *, struct request *, - struct bio *); -typedef int (merge_requests_fn) (request_queue_t *, struct request *, - struct request *); typedef void (request_fn_proc) (request_queue_t *q); typedef int (make_request_fn) (request_queue_t *q, struct bio *bio); typedef int (prep_rq_fn) (request_queue_t *, struct request *); @@ -376,9 +372,6 @@ struct request_queue struct request_list rq; request_fn_proc *request_fn; - merge_request_fn *back_merge_fn; - merge_request_fn *front_merge_fn; - merge_requests_fn *merge_requests_fn; make_request_fn *make_request_fn; prep_rq_fn *prep_rq_fn; unplug_fn *unplug_fn; @@ -648,6 +641,11 @@ extern int scsi_cmd_ioctl(struct file *, struct gendisk *, unsigned int, void __ extern int sg_scsi_ioctl(struct file *, struct request_queue *, struct gendisk *, struct scsi_ioctl_command __user *); +/* + * Temporary export, until SCSI gets fixed up. + */ +extern int ll_back_merge_fn(request_queue_t *, struct request *, struct bio *); + /* * A queue has just exitted congestion. Note this in the global counter of * congested queues, and wake up anyone who was waiting for requests to be -- cgit v1.2.3 From 8e5cfc45e7527eb5c8a9a22d56a7b9227e7c0913 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Dec 2006 11:12:46 +0100 Subject: [PATCH] Fixup blk_rq_unmap_user() API The blk_rq_unmap_user() API is not very nice. It expects the caller to know that rq->bio has to be reset to the original bio, and it will silently do nothing if that is not done. Instead make it explicit that we need to pass in the first bio, by expecting a bio argument. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 0fa33017ec0..36a6eacefe2 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -672,7 +672,7 @@ extern void __blk_stop_queue(request_queue_t *q); extern void blk_run_queue(request_queue_t *); extern void blk_start_queueing(request_queue_t *); extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned long); -extern int blk_rq_unmap_user(struct request *); +extern int blk_rq_unmap_user(struct bio *); extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t); extern int blk_rq_map_user_iov(request_queue_t *, struct request *, struct sg_iovec *, int, unsigned int); -- cgit v1.2.3 From f1fa16e8816a2285ed77070ce60a6858fb7913cc Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Dec 2006 15:32:42 +0100 Subject: [POWERPC] cell: add forward struct declarations to spu.h Needed to be able to include spu.h independant from other headers. Signed-off-by: Arnd Bergmann --- include/asm-powerpc/spu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index fdad4267b44..3d90264e9d3 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -161,6 +161,7 @@ struct spu_syscall_block { extern long spu_sys_callback(struct spu_syscall_block *s); /* syscalls implemented in spufs */ +struct file; extern struct spufs_calls { asmlinkage long (*create_thread)(const char __user *name, unsigned int flags, mode_t mode); @@ -232,6 +233,7 @@ void spu_remove_sysdev_attr_group(struct attribute_group *attrs); * to object-id spufs file from user space and the notifer * function can assume that spu->ctx is valid. */ +struct notifier_block; int spu_switch_event_register(struct notifier_block * n); int spu_switch_event_unregister(struct notifier_block * n); -- cgit v1.2.3 From 519ab5f2be65b72cf12ae99c89752bbe79b44df6 Mon Sep 17 00:00:00 2001 From: Yu Luming Date: Tue, 19 Dec 2006 12:56:15 -0800 Subject: ACPI: video: Add dev argument for backlight_device_register This patch set adds generic abstract layer support for acpi video driver to have generic user interface to control backlight and output switch control by leveraging the existing backlight sysfs class driver, and by adding a new video output sysfs class driver. This patch: Add dev argument for backlight_device_register to link the class device to real device object. The platform specific driver should find a way to get the real device object for their video device. [akpm@osdl.org: build fix] [akpm@osdl.org: fix msi-laptop.c] Signed-off-by: Luming Yu Cc: "Antonino A. Daplas" Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/linux/backlight.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 75e91f5b6a0..a5cf1beacb4 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -54,7 +54,7 @@ struct backlight_device { }; extern struct backlight_device *backlight_device_register(const char *name, - void *devdata, struct backlight_properties *bp); + struct device *dev,void *devdata,struct backlight_properties *bp); extern void backlight_device_unregister(struct backlight_device *bd); #define to_backlight_device(obj) container_of(obj, struct backlight_device, class_dev) -- cgit v1.2.3 From 2dec3ba8d872aa3ffbcdb8f6f8a2c0bcd44e9910 Mon Sep 17 00:00:00 2001 From: Yu Luming Date: Tue, 19 Dec 2006 12:56:17 -0800 Subject: output: Add display output class support Add generic abstract layer for display output switch control. The output sysfs class driver provides an abstract video output layer that can be used to hook platform specific methods to enable/disable video output device through common sysfs interface. Signed-off-by: Luming Yu Cc: "Antonino A. Daplas" Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/linux/video_output.h | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 include/linux/video_output.h (limited to 'include') diff --git a/include/linux/video_output.h b/include/linux/video_output.h new file mode 100644 index 00000000000..e63e0c03ee0 --- /dev/null +++ b/include/linux/video_output.h @@ -0,0 +1,42 @@ +/* + * + * Copyright (C) 2006 Luming Yu + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#ifndef _LINUX_VIDEO_OUTPUT_H +#define _LINUX_VIDEO_OUTPUT_H +#include +struct output_device; +struct output_properties { + int (*set_state)(struct output_device *); + int (*get_status)(struct output_device *); +}; +struct output_device { + int request_state; + struct output_properties *props; + struct class_device class_dev; +}; +#define to_output_device(obj) container_of(obj, struct output_device, class_dev) +struct output_device *video_output_register(const char *name, + struct device *dev, + void *devdata, + struct output_properties *op); +void video_output_unregister(struct output_device *dev); +#endif -- cgit v1.2.3 From 0f0fe1a08aa421266060ac67e50453a06d9ceb63 Mon Sep 17 00:00:00 2001 From: John Keller Date: Tue, 19 Dec 2006 12:56:19 -0800 Subject: ACPI: Add support for acpi_load_table/acpi_unload_table_id Make acpi_load_table() available for use by removing it from the #ifdef ACPI_FUTURE_USAGE. Also add a new routine used to unload an ACPI table of a given type and "id" - acpi_unload_table_id(). The implementation of this new routine was almost a direct copy of existing routine acpi_unload_table() - only difference being that it only removes a specific table id instead of ALL tables of a given type. The SN hotplug driver (sgi_hotplug.c) now uses both of these interfaces to dynamically load and unload SSDT ACPI tables. Also, a few other ACPI routines now used by the SN hotplug driver are exported (since the driver can be a loadable module): acpi_ns_map_handle_to_node acpi_ns_convert_entry_to_handle acpi_ns_get_next_node Signed-off-by: Aaron Young Cc: Greg KH Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/acpi/acpixf.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 049e9aa1b86..81458767a90 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -97,11 +97,12 @@ acpi_find_root_pointer(u32 flags, struct acpi_pointer *rsdp_address); acpi_status acpi_load_tables(void); -#ifdef ACPI_FUTURE_USAGE acpi_status acpi_load_table(struct acpi_table_header *table_ptr); -acpi_status acpi_unload_table(acpi_table_type table_type); +acpi_status acpi_unload_table_id(acpi_table_type table_type, acpi_owner_id id); +#ifdef ACPI_FUTURE_USAGE +acpi_status acpi_unload_table(acpi_table_type table_type); acpi_status acpi_get_table_header(acpi_table_type table_type, u32 instance, struct acpi_table_header *out_table_header); @@ -180,6 +181,8 @@ acpi_get_next_object(acpi_object_type type, acpi_status acpi_get_type(acpi_handle object, acpi_object_type * out_type); +acpi_status acpi_get_id(acpi_handle object, acpi_owner_id * out_type); + acpi_status acpi_get_parent(acpi_handle object, acpi_handle * out_handle); /* -- cgit v1.2.3 From d9301263cce69ee4ef989de5bbe57515ef71a780 Mon Sep 17 00:00:00 2001 From: Glen Masgai Date: Tue, 10 Oct 2006 09:27:19 +0200 Subject: [ALSA] ymfpci: fix swap_rear for S/PDIF passthrough This patch fixes incorrect assignment of swap_rear, which was broken since patch 'ymfpci - make rear channel swap optional' It removes module_param rear_swap. Signed-off-by: Glen Masgai Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- include/sound/ymfpci.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h index d41cda97e95..a3c5de59a24 100644 --- a/include/sound/ymfpci.h +++ b/include/sound/ymfpci.h @@ -345,7 +345,6 @@ struct snd_ymfpci { struct snd_kcontrol *spdif_pcm_ctl; int mode_dup4ch; int rear_opened; - int rear_swap; int spdif_opened; struct { u16 left; @@ -378,7 +377,7 @@ int snd_ymfpci_pcm(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm); int snd_ymfpci_pcm2(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm); int snd_ymfpci_pcm_spdif(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm); int snd_ymfpci_pcm_4ch(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm); -int snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch, int rear_swap); +int snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch); int snd_ymfpci_timer(struct snd_ymfpci *chip, int device); #endif /* __SOUND_YMFPCI_H */ -- cgit v1.2.3 From e3a5d59a17e9a42e3f3e0e37342b2679bab2ff43 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Nov 2006 13:03:19 +0100 Subject: [ALSA] Fix races in PCM OSS emulation Fixed the race among multiple threads accessing the OSS PCM instance concurrently by simply introducing a mutex for protecting a setup of the PCM. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/pcm_oss.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sound/pcm_oss.h b/include/sound/pcm_oss.h index c854647b6f3..1cd4f64cdf3 100644 --- a/include/sound/pcm_oss.h +++ b/include/sound/pcm_oss.h @@ -56,6 +56,7 @@ struct snd_pcm_oss_runtime { size_t mmap_bytes; char *buffer; /* vmallocated period */ size_t buffer_used; /* used length from period buffer */ + struct mutex params_lock; #ifdef CONFIG_SND_PCM_OSS_PLUGINS struct snd_pcm_plugin *plugin_first; struct snd_pcm_plugin *plugin_last; -- cgit v1.2.3 From 01f681da496831eb3aff5a908cefdafe74dd263b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 16 Nov 2006 15:39:07 +0100 Subject: [ALSA] Fix invalid assignment of PCI revision Fix the type of PCI revision to char from int and avoid invalid assignment with pointer cast. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ymfpci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h index a3c5de59a24..f3514ee96bd 100644 --- a/include/sound/ymfpci.h +++ b/include/sound/ymfpci.h @@ -286,7 +286,7 @@ struct snd_ymfpci { int irq; unsigned int device_id; /* PCI device ID */ - unsigned int rev; /* PCI revision */ + unsigned char rev; /* PCI revision */ unsigned long reg_area_phys; void __iomem *reg_area_virt; struct resource *res_reg_area; -- cgit v1.2.3 From 7c21699e30a5c0ca4972d1b6ad22350fe63128d3 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Wed, 20 Dec 2006 09:11:55 +0100 Subject: [ALSA] version 1.0.14rc1 Signed-off-by: Jaroslav Kysela --- include/sound/version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/version.h b/include/sound/version.h index 17137f3a3b6..2949b9b991b 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by alsa/ksync script. */ -#define CONFIG_SND_VERSION "1.0.13" -#define CONFIG_SND_DATE " (Tue Nov 28 14:07:24 2006 UTC)" +#define CONFIG_SND_VERSION "1.0.14rc1" +#define CONFIG_SND_DATE " (Wed Dec 20 08:11:48 2006 UTC)" -- cgit v1.2.3 From da775265021b61d5eb81df155e36cb0810f6df53 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 20 Dec 2006 11:04:12 +0100 Subject: [PATCH] cfq-iosched: don't allow sync merges across queues Currently we allow any merge, even if the io originates from different processes. This can cause really bad starvation and unfairness, if those ios happen to be synchronous (reads or direct writes). So add a allow_merge hook to the io scheduler ops, so an io scheduler can help decide whether a bio/process combination may be merged with an existing request. Signed-off-by: Jens Axboe --- include/linux/elevator.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index a24931d2440..e88fcbc77f8 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -12,6 +12,8 @@ typedef void (elevator_merge_req_fn) (request_queue_t *, struct request *, struc typedef void (elevator_merged_fn) (request_queue_t *, struct request *, int); +typedef int (elevator_allow_merge_fn) (request_queue_t *, struct request *, struct bio *); + typedef int (elevator_dispatch_fn) (request_queue_t *, int); typedef void (elevator_add_req_fn) (request_queue_t *, struct request *); @@ -33,6 +35,7 @@ struct elevator_ops elevator_merge_fn *elevator_merge_fn; elevator_merged_fn *elevator_merged_fn; elevator_merge_req_fn *elevator_merge_req_fn; + elevator_allow_merge_fn *elevator_allow_merge_fn; elevator_dispatch_fn *elevator_dispatch_fn; elevator_add_req_fn *elevator_add_req_fn; -- cgit v1.2.3 From 42a0ee3238a0adb4c5bea3bd5b201c297b476e66 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Thu, 30 Nov 2006 15:58:58 -0800 Subject: pci: add class codes for Wireless RF controllers pci: add class codes for Wireless RF controllers Add PCI codes to include/linux/pci_ids.h for RF controllers; first batch of these devices seem to be the Ultra-Wide-Band and Wireless USB controllers (WHCI spec). Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: Greg Kroah-Hartman --- include/linux/pci_ids.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 95c1e74afeb..778e701eff3 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -104,6 +104,10 @@ #define PCI_CLASS_SERIAL_FIBER 0x0c04 #define PCI_CLASS_SERIAL_SMBUS 0x0c05 +#define PCI_BASE_CLASS_WIRELESS 0x0d +#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10 +#define PCI_CLASS_WIRELESS_WHCI 0x0d1010 + #define PCI_BASE_CLASS_INTELLIGENT 0x0e #define PCI_CLASS_INTELLIGENT_I2O 0x0e00 -- cgit v1.2.3 From d86f90f9913d27bb968132bf63499c56bca56db6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Dec 2006 15:14:44 -0800 Subject: pci: Introduce pci_find_present This works like pci_dev_present but instead of returning boolean returns the matching pci_device_id entry. This makes it much more useful. Code bloat is basically nil as the old boolean function is rewritten in terms of the new one. This will be used by the updated VIA PCI quirks for one Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 01c707261f9..769e132b78d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -468,6 +468,7 @@ struct pci_dev *pci_get_slot (struct pci_bus *bus, unsigned int devfn); struct pci_dev *pci_get_bus_and_slot (unsigned int bus, unsigned int devfn); struct pci_dev *pci_get_class (unsigned int class, struct pci_dev *from); int pci_dev_present(const struct pci_device_id *ids); +const struct pci_device_id *pci_find_present(const struct pci_device_id *ids); int pci_bus_read_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 *val); int pci_bus_read_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 *val); @@ -681,6 +682,7 @@ static inline struct pci_dev *pci_get_class(unsigned int class, struct pci_dev * { return NULL; } #define pci_dev_present(ids) (0) +#define pci_find_present(ids) (NULL) #define pci_dev_put(dev) do { } while (0) static inline void pci_set_master(struct pci_dev *dev) { } -- cgit v1.2.3 From 687d5fe3dc33794efb500f42164a0588e2647914 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 22 Nov 2006 18:26:18 +1100 Subject: PCI: Add pci_find_ht_capability() for finding Hypertransport capabilities There are already several places in the kernel that want to search a PCI device for a given Hypertransport capability. Although this is possible using pci_find_capability() etc., it makes sense to encapsulate that logic in a helper - pci_find_ht_capability(). To cater for searching exhaustively for a capability, we also provide pci_find_next_ht_capability(). We also need to cater for the fact that the HT capability fields may be either 3 or 5 bits wide. pci_find_ht_capability() deals with this for you, but callers using the #defines directly must handle that themselves. Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 2 ++ include/linux/pci_regs.h | 12 +++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 769e132b78d..b20ffb65300 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -454,6 +454,8 @@ struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn); int pci_find_capability (struct pci_dev *dev, int cap); int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability (struct pci_dev *dev, int cap); +int pci_find_ht_capability (struct pci_dev *dev, int ht_cap); +int pci_find_next_ht_capability (struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 064b1dc71c2..a54b48f7cee 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -475,9 +475,19 @@ #define PCI_PWR_CAP 12 /* Capability */ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ -/* Hypertransport sub capability types */ +/* + * Hypertransport sub capability types + * + * Unfortunately there are both 3 bit and 5 bit capability types defined + * in the HT spec, catering for that is a little messy. You probably don't + * want to use these directly, just use pci_find_ht_capability() and it + * will do the right thing for you. + */ +#define HT_3BIT_CAP_MASK 0xE0 #define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */ #define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */ + +#define HT_5BIT_CAP_MASK 0xF8 #define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */ #define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */ #define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */ -- cgit v1.2.3 From d010b51c7ea9c28e30a476032615941aa77b1498 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 22 Nov 2006 18:26:20 +1100 Subject: PCI: Add #defines for Hypertransport MSI fields Add a few #defines for grabbing and working with the address fields in a HT_CAPTYPE_MSI_MAPPING capability. All from the HT spec v3.00. Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman --- include/linux/pci_regs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index a54b48f7cee..7a6d34ee5ab 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -494,6 +494,13 @@ #define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */ #define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */ #define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */ +#define HT_MSI_FLAGS 0x02 /* Offset to flags */ +#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */ +#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */ +#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */ +#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */ +#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */ +#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */ #define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ #define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ #define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ -- cgit v1.2.3 From 1597cacbe39802d86656d1f2e6329895bd2ef531 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Dec 2006 15:14:45 -0800 Subject: PCI: Fix multiple problems with VIA hardware This patch is designed to fix: - Disk eating corruptor on KT7 after resume from RAM - VIA IRQ handling - VIA fixups for bus lockups after resume from RAM The core of this is to add a table of resume fixups run at resume time. We need to do this for a variety of boards and features, but particularly we need to do this to get various critical VIA fixups done on resume. The second part of the problem is to handle VIA IRQ number rules which are a bit odd and need special handling for PIC interrupts. Various patches broke various boxes and while this one may not be perfect (hopefully it is) it ensures the workaround is applied to the right devices only. From: Jean Delvare Now that PCI quirks are replayed on software resume, we can safely re-enable the Asus SMBus unhiding quirk even when software suspend support is enabled. [akpm@osdl.org: fix const warning] Signed-off-by: Alan Cox Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/asm-generic/vmlinux.lds.h | 3 +++ include/linux/pci.h | 19 +++++++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'include') diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 1587121730c..9fcc8d9fbb1 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -35,6 +35,9 @@ VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \ *(.pci_fixup_enable) \ VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \ + VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \ + *(.pci_fixup_resume) \ + VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \ } \ \ /* RapidIO route ops */ \ diff --git a/include/linux/pci.h b/include/linux/pci.h index b20ffb65300..c1a2bc8e09d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -396,6 +396,21 @@ struct pci_driver { */ #define pci_module_init pci_register_driver +/** + * PCI_VDEVICE - macro used to describe a specific pci device in short form + * @vend: the vendor name + * @dev: the 16 bit PCI Device ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI device. The subvendor, and subdevice fields will be set + * to PCI_ANY_ID. The macro allows the next field to follow as the device + * private data. + */ + +#define PCI_VDEVICE(vendor, device) \ + PCI_VENDOR_ID_##vendor, (device), \ + PCI_ANY_ID, PCI_ANY_ID, 0, 0 + /* these external functions are only available when PCI support is enabled */ #ifdef CONFIG_PCI @@ -787,6 +802,7 @@ enum pci_fixup_pass { pci_fixup_header, /* After reading configuration header */ pci_fixup_final, /* Final phase of device fixups */ pci_fixup_enable, /* pci_enable_device() time */ + pci_fixup_resume, /* pci_enable_device() time */ }; /* Anonymous variables would be nice... */ @@ -805,6 +821,9 @@ enum pci_fixup_pass { #define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ + resume##vendor##device##hook, vendor, device, hook) void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); -- cgit v1.2.3 From 7e7a43c32a8970ea2bfc3d1af353dcb1a9237769 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 19 Dec 2006 13:12:07 -0800 Subject: PCI: don't export device IDs to userspace I don't see any good reason for exporting device IDs to userspace. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/Kbuild | 2 -- include/linux/pci.h | 6 +++--- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index a1b04d8a1d0..68dd42b9bac 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -119,7 +119,6 @@ header-y += nfs4_mount.h header-y += nfs_mount.h header-y += oom.h header-y += param.h -header-y += pci_ids.h header-y += pci_regs.h header-y += personality.h header-y += pfkeyv2.h @@ -162,7 +161,6 @@ header-y += vt.h header-y += wireless.h header-y += xattr.h header-y += x25.h -header-y += zorro_ids.h unifdef-y += acct.h unifdef-y += adb.h diff --git a/include/linux/pci.h b/include/linux/pci.h index c1a2bc8e09d..f3c617eabd8 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -20,9 +20,6 @@ /* Include the pci register defines */ #include -/* Include the ID list */ -#include - /* * The PCI interface treats multi-function devices as independent * devices. The slot/function address of each device is encoded @@ -54,6 +51,9 @@ #include #include +/* Include the ID list */ +#include + /* File state for mmap()s on /proc/bus/pci/X/Y */ enum pci_mmap_state { pci_mmap_io, -- cgit v1.2.3 From fb0f2b40faff41f03acaa2ee6e6231fc96ca497c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 19 Dec 2006 13:12:08 -0800 Subject: PCI legacy resource fix Since commit 368c73d4f689dae0807d0a2aa74c61fd2b9b075f the kernel will try to update the non-writeable BAR registers 0..3 of PIIX4 IDE adapters if pci_assign_unassigned_resources() is used to do full resource assignment of the bus. This fails because in the PIIX4 these BAR registers have implicitly assumed values and read back as zero; it used to work because the kernel used to just write zero to that register the read back value did match what was written. The fix is a new resource flag IORESOURCE_PCI_FIXED used to mark a resource as non-movable. This will also be useful to keep other import system resources from being moved around - for example system consoles on PCI busses. [akpm@osdl.org: cleanup] Signed-off-by: Ralf Baechle Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/ioport.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/ioport.h b/include/linux/ioport.h index cf8696d4a13..15228d79c5b 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -91,6 +91,9 @@ struct resource_list { #define IORESOURCE_ROM_COPY (1<<2) /* ROM is alloc'd copy, resource field overlaid */ #define IORESOURCE_ROM_BIOS_COPY (1<<3) /* ROM is BIOS copy, resource field overlaid */ +/* PCI control bits. Shares IORESOURCE_BITS with above PCI ROM. */ +#define IORESOURCE_PCI_FIXED (1<<4) /* Do not move resource */ + /* PC/ISA/whatever - the normal PC address spaces: IO and memory */ extern struct resource ioport_resource; extern struct resource iomem_resource; -- cgit v1.2.3 From 542cfce6f36e8c43f71ae9c235b78497f350ae55 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 19 Dec 2006 13:01:27 -0800 Subject: kobject: kobject_uevent() returns manageable value Since kobject_uevent() function does not return an integer value to indicate if its operation was completed with success or not, it is worth changing it in order to report a proper status (success or error) instead of returning void. [randy.dunlap@oracle.com: Fix inline kobject functions] Cc: Mauricio Lin Signed-off-by: Aneesh Kumar K.V Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/kobject.h b/include/linux/kobject.h index d1c8d28fa92..76538fcf2c4 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -265,8 +265,8 @@ extern int __must_check subsys_create_file(struct subsystem * , struct subsys_attribute *); #if defined(CONFIG_HOTPLUG) -void kobject_uevent(struct kobject *kobj, enum kobject_action action); -void kobject_uevent_env(struct kobject *kobj, enum kobject_action action, +int kobject_uevent(struct kobject *kobj, enum kobject_action action); +int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, char *envp[]); int add_uevent_var(char **envp, int num_envp, int *cur_index, @@ -274,11 +274,12 @@ int add_uevent_var(char **envp, int num_envp, int *cur_index, const char *format, ...) __attribute__((format (printf, 7, 8))); #else -static inline void kobject_uevent(struct kobject *kobj, enum kobject_action action) { } -static inline void kobject_uevent_env(struct kobject *kobj, +static inline int kobject_uevent(struct kobject *kobj, enum kobject_action action) +{ return 0; } +static inline int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, char *envp[]) -{ } +{ return 0; } static inline int add_uevent_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, -- cgit v1.2.3 From 1f21782e63da81f56401a813a52091ef2703838f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 19 Dec 2006 13:01:28 -0800 Subject: Driver core: proper prototype for drivers/base/init.c:driver_init() Add a prototype for driver_init() in include/linux/device.h. Also remove a static function of the same name in drivers/acpi/ibm_acpi.c to ibm_acpi_driver_init() to fix the namespace collision. Signed-off-by: Adrian Bunk Acked-by: Henrique de Moraes Holschuh Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index 49ab53ce92d..f44247fe813 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -433,6 +433,8 @@ static inline int device_is_registered(struct device *dev) return dev->is_registered; } +void driver_init(void); + /* * High level routines for use by the bus drivers */ -- cgit v1.2.3 From 2786f6e388e9dfe9e7b1c3c6bd7fcfba9cfb9831 Mon Sep 17 00:00:00 2001 From: Rui Zhang Date: Thu, 21 Dec 2006 02:21:13 -0500 Subject: ACPI: fix Supermicro X7DB8+ Boot regression http://bugzilla.kernel.org/show_bug.cgi?id=7695 Originally we converted bind/unbind to use a new pci bridge driver. The driver will add/remove _PRT, so we can eventually remove .bind/.unbind methods. But we found that some of the _ADR-Based devices don't have _PRT, i.e. they are not managed by the new ACPI PCI bridge driver. So that .bind method is not called for some _ADR-Based devices, which leads to a failure. Now we make ACPI PCI Root Bridge Driver scan and binds all _ADR-Based devices once the driver is loaded, in the .add method of ACPI PCI Root Bridge driver. Extra code path for calling .bind/.unbind when _ADR-Based devices are hot added/removed is also added. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_drivers.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index be67750ec88..2781e662864 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -44,7 +44,6 @@ #define ACPI_BUTTON_HID_SLEEPF "ACPI_FSB" #define ACPI_VIDEO_HID "ACPI_VID" -#define ACPI_PCI_BRIDGE_HID "ACPI_PCI" /* -------------------------------------------------------------------------- PCI -------------------------------------------------------------------------- */ -- cgit v1.2.3 From fba2591bf4e418b6c3f9f8794c9dd8fe40ae7bd9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 20 Dec 2006 13:46:42 -0800 Subject: VM: Remove "clear_page_dirty()" and "test_clear_page_dirty()" functions They were horribly easy to mis-use because of their tempting naming, and they also did way more than any users of them generally wanted them to do. A dirty page can become clean under two circumstances: (a) when we write it out. We have "clear_page_dirty_for_io()" for this, and that function remains unchanged. In the "for IO" case it is not sufficient to just clear the dirty bit, you also have to mark the page as being under writeback etc. (b) when we actually remove a page due to it becoming inaccessible to users, notably because it was truncate()'d away or the file (or metadata) no longer exists, and we thus want to cancel any outstanding dirty state. For the (b) case, we now introduce "cancel_dirty_page()", which only touches the page state itself, and verifies that the page is not mapped (since cancelling writes on a mapped page would be actively wrong as it is still accessible to users). Some filesystems need to be fixed up for this: CIFS, FUSE, JFS, ReiserFS, XFS all use the old confusing functions, and will be fixed separately in subsequent commits (with some of them just removing the offending logic, and others using clear_page_dirty_for_io()). This was confirmed by Martin Michlmayr to fix the apt database corruption on ARM. Cc: Martin Michlmayr Cc: Peter Zijlstra Cc: Hugh Dickins Cc: Nick Piggin Cc: Arjan van de Ven Cc: Andrei Popa Cc: Andrew Morton Cc: Dave Kleikamp Cc: Gordon Farquharson Cc: Martin Schwidefsky Cc: Trond Myklebust Signed-off-by: Linus Torvalds --- include/linux/page-flags.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 4830a3bedfb..350878a2d84 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -253,15 +253,11 @@ static inline void SetPageUptodate(struct page *page) struct page; /* forward declaration */ -int test_clear_page_dirty(struct page *page); +extern void cancel_dirty_page(struct page *page, unsigned int account_size); + int test_clear_page_writeback(struct page *page); int test_set_page_writeback(struct page *page); -static inline void clear_page_dirty(struct page *page) -{ - test_clear_page_dirty(page); -} - static inline void set_page_writeback(struct page *page) { test_set_page_writeback(page); -- cgit v1.2.3 From 0b76e20b27d20f7cb240e6b1b2dbebaa1b7f9b60 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Fri, 22 Dec 2006 01:06:02 -0800 Subject: [PATCH] KVM: API versioning Add compile-time and run-time API versioning. Signed-off-by: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kvm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 5bb2c3c585c..28fdce1ac1d 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -11,6 +11,8 @@ #include #include +#define KVM_API_VERSION 1 + /* * Architectural interrupt line count, and the size of the bitmap needed * to hold them. @@ -209,6 +211,7 @@ struct kvm_dirty_log { #define KVMIO 0xAE +#define KVM_GET_API_VERSION _IO(KVMIO, 1) #define KVM_RUN _IOWR(KVMIO, 2, struct kvm_run) #define KVM_GET_REGS _IOWR(KVMIO, 3, struct kvm_regs) #define KVM_SET_REGS _IOW(KVMIO, 4, struct kvm_regs) -- cgit v1.2.3 From 2aea4fb61609ba7ef82f7dc6fca116bda88816e1 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 22 Dec 2006 01:06:10 -0800 Subject: [PATCH] CONFIG_VM_EVENT_COUNTER comment decrustify The VM event counters, enabled by CONFIG_VM_EVENT_COUNTERS, which provides VM event counters in /proc/vmstat, has become more essential to non-EMBEDDED kernel configurations than they were in the past. Comments in the code and the Kconfig configuration explanation were stale, downplaying their role excessively. Refresh those comments to correctly reflect the current role of VM event counters. Signed-off-by: Paul Jackson Acked-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmstat.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index c89df55f6e0..53236001091 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -10,8 +10,9 @@ /* * Light weight per cpu counter implementation. * - * Counters should only be incremented and no critical kernel component - * should rely on the counter values. + * Counters should only be incremented. You need to set EMBEDDED + * to disable VM_EVENT_COUNTERS. Things like procps (vmstat, + * top, etc) use /proc/vmstat and depend on these counters. * * Counters are handled completely inline. On many platforms the code * generated will simply be the increment of a global address. -- cgit v1.2.3 From e903387f1ebe3a7ddb93cd49c38341d3632df528 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 22 Dec 2006 01:08:01 -0800 Subject: [PATCH] fix vm_events_fold_cpu() build breakage fix vm_events_fold_cpu() build breakage 2.6.20-rc1 does not build properly if CONFIG_VM_EVENT_COUNTERS is set and CONFIG_HOTPLUG is unset: CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 mm/built-in.o: In function `page_alloc_cpu_notify': page_alloc.c:(.text+0x56eb): undefined reference to `vm_events_fold_cpu' make: *** [.tmp_vmlinux1] Error 1 [akpm@osdl.org: cleanup] Signed-off-by: Magnus Damm Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmstat.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 53236001091..5e9803ed17f 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -74,7 +74,13 @@ static inline void count_vm_events(enum vm_event_item item, long delta) } extern void all_vm_events(unsigned long *); +#ifdef CONFIG_HOTPLUG extern void vm_events_fold_cpu(int cpu); +#else +static inline void vm_events_fold_cpu(int cpu) +{ +} +#endif #else -- cgit v1.2.3 From 9127d4b1d9b2e8fba8e7fbc7f88ea93e5eb01396 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 22 Dec 2006 01:08:52 -0800 Subject: [PATCH] lock debugging: fix DEBUG_LOCKS_WARN_ON() & debug_locks_silent Matthew Wilcox noticed that the debug_locks_silent use should be inverted in DEBUG_LOCKS_WARN_ON(). This bug was causing spurious stacktraces and incorrect failures in the locking self-test on the parisc kernel. Bug-found-by: Matthew Wilcox Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/debug_locks.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index a1c10b0c4cf..1678a5de701 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -24,7 +24,7 @@ extern int debug_locks_off(void); int __ret = 0; \ \ if (unlikely(c)) { \ - if (debug_locks_silent || debug_locks_off()) \ + if (debug_locks_off() && !debug_locks_silent) \ WARN_ON(1); \ __ret = 1; \ } \ -- cgit v1.2.3 From 7de6b8057976584e5a422574cae4dd21c677b4d4 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 22 Dec 2006 01:09:33 -0800 Subject: [PATCH] mm: more rmap debugging Add more debugging in the rmap code in an attempt to locate to source of the occasional "mapcount went negative" assertions. Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rmap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/rmap.h b/include/linux/rmap.h index 36f850373d2..bdd277223af 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -72,7 +72,7 @@ void __anon_vma_link(struct vm_area_struct *); void page_add_anon_rmap(struct page *, struct vm_area_struct *, unsigned long); void page_add_new_anon_rmap(struct page *, struct vm_area_struct *, unsigned long); void page_add_file_rmap(struct page *); -void page_remove_rmap(struct page *); +void page_remove_rmap(struct page *, struct vm_area_struct *); /** * page_dup_rmap - duplicate pte mapping to a page -- cgit v1.2.3 From 5c95da9f5abeff865b7273b59e1a3c50a2c5acb2 Mon Sep 17 00:00:00 2001 From: Yasunori Goto Date: Fri, 22 Dec 2006 01:09:54 -0800 Subject: [PATCH] compile error of register_memory() register_memory() becomes double definition in 2.6.20-rc1. It is defined in arch/i386/kernel/setup.c as static definition in 2.6.19. But it is moved to arch/i386/kernel/e820.c in 2.6.20-rc1. And same name function is defined in driver/base/memory.c too. So, it becomes cause of compile error of duplicate definition if memory hotplug option is on. Signed-off-by: Yasunori Goto Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/e820.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-i386/e820.h b/include/asm-i386/e820.h index 395077aba58..c5b8fc6109d 100644 --- a/include/asm-i386/e820.h +++ b/include/asm-i386/e820.h @@ -40,7 +40,7 @@ extern int e820_all_mapped(unsigned long start, unsigned long end, unsigned type); extern void find_max_pfn(void); extern void register_bootmem_low_pages(unsigned long max_low_pfn); -extern void register_memory(void); +extern void e820_register_memory(void); extern void limit_regions(unsigned long long size); extern void print_memory_map(char *who); -- cgit v1.2.3 From 01b2d93ca4c495f056471189ac6c4e6ac4cbbccb Mon Sep 17 00:00:00 2001 From: Vadim Lobanov Date: Fri, 22 Dec 2006 01:10:43 -0800 Subject: [PATCH] fdtable: Provide free_fdtable() wrapper Christoph Hellwig has expressed concerns that the recent fdtable changes expose the details of the RCU methodology used to release no-longer-used fdtable structures to the rest of the kernel. The trivial patch below addresses these concerns by introducing the appropriate free_fdtable() calls, which simply wrap the release RCU usage. Since free_fdtable() is a one-liner, it makes sense to promote it to an inline helper. Signed-off-by: Vadim Lobanov Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/file.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/file.h b/include/linux/file.h index edca361f2ab..a59001e9ea5 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -80,6 +80,11 @@ extern int expand_files(struct files_struct *, int nr); extern void free_fdtable_rcu(struct rcu_head *rcu); extern void __init files_defer_init(void); +static inline void free_fdtable(struct fdtable *fdt) +{ + call_rcu(&fdt->rcu, free_fdtable_rcu); +} + static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd) { struct file * file = NULL; -- cgit v1.2.3 From 080dd51d81c8a9373303e9c344bbc75aacf54dce Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 22 Dec 2006 01:11:04 -0800 Subject: [PATCH] mips: if_fddi.h: Add a missing inclusion This is a change to include in which is needed for "struct fddi_statistics". Signed-off-by: Maciej W. Rozycki Cc: Ralf Baechle Cc: Jeff Garzik Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/if_fddi.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h index e0a15004620..4aba6b0ad41 100644 --- a/include/linux/if_fddi.h +++ b/include/linux/if_fddi.h @@ -103,6 +103,8 @@ struct fddihdr } __attribute__ ((packed)); #ifdef __KERNEL__ +#include + /* Define FDDI statistics structure */ struct fddi_statistics { -- cgit v1.2.3 From 9a036b9c33f74c989c4c8ac0abe05e0ed88f1f25 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 20 Dec 2006 10:25:55 -0800 Subject: [TCP]: Fix ambiguity in the `before' relation. While looking at DCCP sequence numbers, I stumbled over a problem with the following definition of before in tcp.h: static inline int before(__u32 seq1, __u32 seq2) { return (__s32)(seq1-seq2) < 0; } Problem: This definition suffers from an an ambiguity, i.e. always before(a, (a + 2^31) % 2^32)) = 1 before((a + 2^31) % 2^32), a) = 1 In text: when the difference between a and b amounts to 2^31, a is always considered `before' b, the function can not decide. The reason is that implicitly 0 is `before' 1 ... 2^31-1 ... 2^31 Solution: There is a simple fix, by defining before in such a way that 0 is no longer `before' 2^31, i.e. 0 `before' 1 ... 2^31-1 By not using the middle between 0 and 2^32, before can be made unambiguous. This is achieved by testing whether seq2-seq1 > 0 (using signed 32-bit arithmetic). I attach a patch to codify this. Also the `after' relation is basically a redefinition of `before', it is now defined as a macro after before. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller --- include/net/tcp.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/net/tcp.h b/include/net/tcp.h index c99774f15eb..b7d8317f22a 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -242,14 +242,9 @@ extern int tcp_memory_pressure; static inline int before(__u32 seq1, __u32 seq2) { - return (__s32)(seq1-seq2) < 0; + return (__s32)(seq2-seq1) > 0; } - -static inline int after(__u32 seq1, __u32 seq2) -{ - return (__s32)(seq2-seq1) < 0; -} - +#define after(seq2, seq1) before(seq1, seq2) /* is s2<=s1<=s3 ? */ static inline int between(__u32 seq1, __u32 seq2, __u32 seq3) -- cgit v1.2.3 From a3f7f142f73ed4cb23826bee84afc31d10377e39 Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Wed, 20 Dec 2006 16:06:09 -0800 Subject: [SCTP]: Don't export include/linux/sctp.h to userspace. This file contains protocol definitions and there are no SCTP apps that use this file. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 68dd42b9bac..862e483cce8 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -137,7 +137,6 @@ header-y += radeonfb.h header-y += raw.h header-y += resource.h header-y += rose.h -header-y += sctp.h header-y += smbno.h header-y += snmp.h header-y += sockios.h -- cgit v1.2.3 From 0f3fffd8ab1db7658c97c167e8ab001cc814e1f4 Mon Sep 17 00:00:00 2001 From: Ivan Skytte Jorgensen Date: Wed, 20 Dec 2006 16:07:04 -0800 Subject: [SCTP]: Fix typo adaption -> adaptation as per the latest API draft. Signed-off-by: Ivan Skytte Jorgensen Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- include/linux/sctp.h | 10 +++++----- include/net/sctp/structs.h | 8 ++++---- include/net/sctp/ulpevent.h | 2 +- include/net/sctp/user.h | 28 ++++++++++++++-------------- 4 files changed, 24 insertions(+), 24 deletions(-) (limited to 'include') diff --git a/include/linux/sctp.h b/include/linux/sctp.h index 35108fe7a68..d4f86560bff 100644 --- a/include/linux/sctp.h +++ b/include/linux/sctp.h @@ -180,7 +180,7 @@ typedef enum { SCTP_PARAM_ERR_CAUSE = __constant_htons(0xc003), SCTP_PARAM_SET_PRIMARY = __constant_htons(0xc004), SCTP_PARAM_SUCCESS_REPORT = __constant_htons(0xc005), - SCTP_PARAM_ADAPTION_LAYER_IND = __constant_htons(0xc006), + SCTP_PARAM_ADAPTATION_LAYER_IND = __constant_htons(0xc006), } sctp_param_t; /* enum */ @@ -281,11 +281,11 @@ typedef struct sctp_ecn_capable_param { sctp_paramhdr_t param_hdr; } __attribute__((packed)) sctp_ecn_capable_param_t; -/* ADDIP Section 3.2.6 Adaption Layer Indication */ -typedef struct sctp_adaption_ind_param { +/* ADDIP Section 3.2.6 Adaptation Layer Indication */ +typedef struct sctp_adaptation_ind_param { struct sctp_paramhdr param_hdr; - __be32 adaption_ind; -} __attribute__((packed)) sctp_adaption_ind_param_t; + __be32 adaptation_ind; +} __attribute__((packed)) sctp_adaptation_ind_param_t; /* RFC 2960. Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2): * The INIT ACK chunk is used to acknowledge the initiation of an SCTP diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 8d7f26d684e..31a8e88f1a7 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -306,7 +306,7 @@ struct sctp_sock { __u8 disable_fragments; __u8 pd_mode; __u8 v4mapped; - __u32 adaption_ind; + __u32 adaptation_ind; /* Receive to here while partial delivery is in effect. */ struct sk_buff_head pd_lobby; @@ -388,7 +388,7 @@ struct sctp_cookie { /* Padding for future use */ __u8 padding; - __u32 adaption_ind; + __u32 adaptation_ind; /* This is a shim for my peer's INIT packet, followed by @@ -431,7 +431,7 @@ union sctp_params { struct sctp_ipv4addr_param *v4; struct sctp_ipv6addr_param *v6; union sctp_addr_param *addr; - struct sctp_adaption_ind_param *aind; + struct sctp_adaptation_ind_param *aind; }; /* RFC 2960. Section 3.3.5 Heartbeat. @@ -1483,7 +1483,7 @@ struct sctp_association { __u8 asconf_capable; /* Does peer support ADDIP? */ __u8 prsctp_capable; /* Can peer do PR-SCTP? */ - __u32 adaption_ind; /* Adaption Code point. */ + __u32 adaptation_ind; /* Adaptation Code point. */ /* This mask is used to disable sending the ASCONF chunk * with specified parameter to peer. diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h index 1a4ddc1ec7d..2923e3d31a0 100644 --- a/include/net/sctp/ulpevent.h +++ b/include/net/sctp/ulpevent.h @@ -120,7 +120,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_pdapi( const struct sctp_association *asoc, __u32 indication, gfp_t gfp); -struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication( +struct sctp_ulpevent *sctp_ulpevent_make_adaptation_indication( const struct sctp_association *asoc, gfp_t gfp); struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc, diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index 9e4a39fd129..67a30eb2b3a 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -75,8 +75,8 @@ enum sctp_optname { #define SCTP_SET_PEER_PRIMARY_ADDR SCTP_SET_PEER_PRIMARY_ADDR SCTP_PRIMARY_ADDR, #define SCTP_PRIMARY_ADDR SCTP_PRIMARY_ADDR - SCTP_ADAPTION_LAYER, -#define SCTP_ADAPTION_LAYER SCTP_ADAPTION_LAYER + SCTP_ADAPTATION_LAYER, +#define SCTP_ADAPTATION_LAYER SCTP_ADAPTATION_LAYER SCTP_DISABLE_FRAGMENTS, #define SCTP_DISABLE_FRAGMENTS SCTP_DISABLE_FRAGMENTS SCTP_PEER_ADDR_PARAMS, @@ -331,17 +331,17 @@ struct sctp_shutdown_event { }; /* - * 5.3.1.6 SCTP_ADAPTION_INDICATION + * 5.3.1.6 SCTP_ADAPTATION_INDICATION * - * When a peer sends a Adaption Layer Indication parameter , SCTP + * When a peer sends a Adaptation Layer Indication parameter , SCTP * delivers this notification to inform the application - * that of the peers requested adaption layer. + * that of the peers requested adaptation layer. */ -struct sctp_adaption_event { +struct sctp_adaptation_event { __u16 sai_type; __u16 sai_flags; __u32 sai_length; - __u32 sai_adaption_ind; + __u32 sai_adaptation_ind; sctp_assoc_t sai_assoc_id; }; @@ -374,7 +374,7 @@ struct sctp_event_subscribe { __u8 sctp_peer_error_event; __u8 sctp_shutdown_event; __u8 sctp_partial_delivery_event; - __u8 sctp_adaption_layer_event; + __u8 sctp_adaptation_layer_event; }; /* @@ -395,7 +395,7 @@ union sctp_notification { struct sctp_remote_error sn_remote_error; struct sctp_send_failed sn_send_failed; struct sctp_shutdown_event sn_shutdown_event; - struct sctp_adaption_event sn_adaption_event; + struct sctp_adaptation_event sn_adaptation_event; struct sctp_pdapi_event sn_pdapi_event; }; @@ -412,7 +412,7 @@ enum sctp_sn_type { SCTP_REMOTE_ERROR, SCTP_SHUTDOWN_EVENT, SCTP_PARTIAL_DELIVERY_EVENT, - SCTP_ADAPTION_INDICATION, + SCTP_ADAPTATION_INDICATION, }; /* Notification error codes used to fill up the error fields in some @@ -488,13 +488,13 @@ struct sctp_prim { } __attribute__((packed, aligned(4))); /* - * 7.1.11 Set Adaption Layer Indicator (SCTP_ADAPTION_LAYER) + * 7.1.11 Set Adaptation Layer Indicator (SCTP_ADAPTATION_LAYER) * - * Requests that the local endpoint set the specified Adaption Layer + * Requests that the local endpoint set the specified Adaptation Layer * Indication parameter for all future INIT and INIT-ACK exchanges. */ -struct sctp_setadaption { - __u32 ssb_adaption_ind; +struct sctp_setadaptation { + __u32 ssb_adaptation_ind; }; /* -- cgit v1.2.3 From 24123186fa271e7ad34a40f815782e6205f34ff7 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 20 Dec 2006 16:08:22 -0800 Subject: [SCTP]: make 2 functions static This patch makes the following needlessly global functions static: - ipv6.c: sctp_inet6addr_event() - protocol.c: sctp_inetaddr_event() Signed-off-by: Adrian Bunk Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- include/net/sctp/sctp.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index c818f87122a..28af6805952 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -128,8 +128,6 @@ extern int sctp_copy_local_addr_list(struct sctp_bind_addr *, int flags); extern struct sctp_pf *sctp_get_pf_specific(sa_family_t family); extern int sctp_register_pf(struct sctp_pf *, sa_family_t); -int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev, - void *ptr); /* * sctp/socket.c -- cgit v1.2.3 From b23e3536667373e44f52a907f63cb55f75969490 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 21 Dec 2006 13:15:18 -0800 Subject: [IPV6]: Dumb typo in generic csum_ipv6_magic() ... duh Signed-off-by: Al Viro Signed-off-by: David S. Miller --- include/net/ip6_checksum.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/ip6_checksum.h b/include/net/ip6_checksum.h index 68e2b32cf1d..bc1b0fda2b0 100644 --- a/include/net/ip6_checksum.h +++ b/include/net/ip6_checksum.h @@ -87,7 +87,7 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, carry = (sum < uproto); sum += carry; - return csum_fold((__force __wsum)csum); + return csum_fold((__force __wsum)sum); } #endif -- cgit v1.2.3 From cb2c7b4927c8f376b7ba9557978d8c59ed472664 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 20 Dec 2006 06:51:37 -0300 Subject: V4L/DVB (4988): Cx2341x audio_properties is an u16, not u8 This bug broke the MPEG audio mode controls. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/cx2341x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h index d91d88f93c8..ecad55bf016 100644 --- a/include/media/cx2341x.h +++ b/include/media/cx2341x.h @@ -49,7 +49,7 @@ struct cx2341x_mpeg_params { enum v4l2_mpeg_audio_mode_extension audio_mode_extension; enum v4l2_mpeg_audio_emphasis audio_emphasis; enum v4l2_mpeg_audio_crc audio_crc; - u8 audio_properties; + u16 audio_properties; /* video */ enum v4l2_mpeg_video_encoding video_encoding; -- cgit v1.2.3 From 0b778a56e342e0e1d274298ad47d9af22a9de633 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 27 Dec 2006 14:04:09 -0200 Subject: V4L/DVB (5001): Add two required headers on kernel 2.6.20-rc1 include/media/ir-common.h:78: error: field 'work' has incomplete type drivers/media/common/ir-functions.c: In function 'ir_rc5_timer_end': drivers/media/common/ir-functions.c:301: error: 'jiffies' undeclared (first use in this function) drivers/media/common/ir-functions.c:301: error: (Each undeclared identifier is reported only once) drivers/media/common/ir-functions.c:301: error: for each function it appears in.) drivers/media/common/ir-functions.c:347: error: 'HZ' undeclared (first use in this function) Signed-off-by: Mauro Carvalho Chehab --- include/media/ir-common.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 2b25f5c9500..4bb0ad81017 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -24,6 +24,7 @@ #define _IR_COMMON #include +#include #define IR_TYPE_RC5 1 #define IR_TYPE_PD 2 /* Pulse distance encoded IR */ -- cgit v1.2.3 From 2ca2c570b0e38b0c214426b1708ee1b0c3a5067d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 22 Dec 2006 14:33:18 +0100 Subject: [ARM] 4063/1: ep93xx: fix IRQ_EP93XX_GPIO?MUX numbering Fix incorrect IRQ numbering in arch-ep93xx/irqs.h (source: Applied Data Systems 2.6.17 kernel tree.) Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-ep93xx/irqs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h index 9a42f5de9e5..ae532e304bf 100644 --- a/include/asm-arm/arch-ep93xx/irqs.h +++ b/include/asm-arm/arch-ep93xx/irqs.h @@ -22,9 +22,9 @@ #define IRQ_EP93XX_DMAM2P9 16 #define IRQ_EP93XX_DMAM2M0 17 #define IRQ_EP93XX_DMAM2M1 18 -#define IRQ_EP93XX_GPIO0MUX 20 -#define IRQ_EP93XX_GPIO1MUX 21 -#define IRQ_EP93XX_GPIO2MUX 22 +#define IRQ_EP93XX_GPIO0MUX 19 +#define IRQ_EP93XX_GPIO1MUX 20 +#define IRQ_EP93XX_GPIO2MUX 21 #define IRQ_EP93XX_GPIO3MUX 22 #define IRQ_EP93XX_UART1RX 23 #define IRQ_EP93XX_UART1TX 24 -- cgit v1.2.3 From 431d2cd99f9721ad09f859dc65895f30385cc5c6 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 27 Dec 2006 22:56:44 +0100 Subject: [ARM] 4073/1: Prevent s3c24xx drivers from including asm/arch/hardware.h and asm/arch/irqs.h As reminded in http://lkml.org/lkml/2006/12/23/26, one should use asm/hardware.h and asm/irq.h but absent-minded devs like me tends to use asm/arch/hardware.h and/or asm/arch/irqs.h. This patch aims at preventing such things. In order to make it work, I had to modify asm-arm/irq.h too so that it can be included from assembly files. Also, as a side effect, I had to modify some headers who were using the asm/arch/hardware.h or asm/arch/irqs.h. Signed-off-by: Arnaud Patard Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/dma.h | 2 +- include/asm-arm/arch-s3c2410/entry-macro.S | 2 +- include/asm-arm/arch-s3c2410/hardware.h | 4 ++++ include/asm-arm/arch-s3c2410/irqs.h | 3 +++ include/asm-arm/irq.h | 5 ++++- 5 files changed, 13 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index 7ac22483697..58ffa7ba3c8 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -14,7 +14,7 @@ #define __ASM_ARCH_DMA_H __FILE__ #include -#include "hardware.h" +#include /* * This is the maximum DMA address(physical address) that can be DMAd to. diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S index e09a6b8ec15..1eb4e6b8d24 100644 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -20,7 +20,7 @@ #define INTOFFSET (0x14) #include -#include +#include .macro get_irqnr_and_base, irqnr, irqstat, base, tmp diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h index 729565e5cdf..6dadf58ff98 100644 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -13,6 +13,10 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H +#ifndef __ASM_HARDWARE_H +#error "Do not include this directly, instead #include " +#endif + #ifndef __ASSEMBLY__ /* external functions for GPIO support diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h index 39a69829d16..4b7cff456c4 100644 --- a/include/asm-arm/arch-s3c2410/irqs.h +++ b/include/asm-arm/arch-s3c2410/irqs.h @@ -12,6 +12,9 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H __FILE__ +#ifndef __ASM_ARM_IRQ_H +#error "Do not include this directly, instead #include " +#endif /* we keep the first set of CPU IRQs out of the range of * the ISA space, so that the PC104 has them to itself diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h index 283af50a16c..1b882a255e3 100644 --- a/include/asm-arm/irq.h +++ b/include/asm-arm/irq.h @@ -19,7 +19,6 @@ #define NO_IRQ ((unsigned int)(-1)) #endif -struct irqaction; /* * Migration helpers @@ -37,6 +36,10 @@ struct irqaction; #define IRQT_HIGH (__IRQT_HIGHLVL) #define IRQT_PROBE IRQ_TYPE_PROBE +#ifndef __ASSEMBLY__ +struct irqaction; extern void migrate_irqs(void); #endif +#endif + -- cgit v1.2.3 From 4cc2f7a84d64d25a16bb9383148c1467284e2356 Mon Sep 17 00:00:00 2001 From: Paul Brook Date: Thu, 28 Dec 2006 01:54:16 +0100 Subject: [ARM] 4074/1: Flat loader stack alignment The ARM EABI requires doubleword (8-byte) stack alignment at all public entry points. The patch below makes the bFLT loader honour this. It's always safe to start with a doubleword aligned stack so it doesn't seem worth making this conditional on CONFIG_AEABI. Paul Signed-off-by: Paul Brook Signed-off-by: Russell King --- include/asm-arm/flat.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h index 96694647858..16f5375e57b 100644 --- a/include/asm-arm/flat.h +++ b/include/asm-arm/flat.h @@ -5,7 +5,9 @@ #ifndef __ARM_FLAT_H__ #define __ARM_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ +/* An odd number of words will be pushed after this alignment, so + deliberately misalign the value. */ +#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -- cgit v1.2.3 From b0b1d60a64054697ef828e0565f006cc0f823590 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 29 Dec 2006 01:30:24 +0100 Subject: [ARM] 4077/1: iop13xx: fix __io() macro Since iop13xx defines the PCI I/O spaces with physical resource addresses the __io macro needs to perform the physical to virtual conversion. I incorrectly assumed that this would be handled by ioremap, but drivers (like e1000) directly dereference the address returned from __io. Signed-off-by: Dan Williams Signed-off-by: Russell King --- include/asm-arm/arch-iop13xx/io.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h index db6de2480a2..5a7bdb52660 100644 --- a/include/asm-arm/arch-iop13xx/io.h +++ b/include/asm-arm/arch-iop13xx/io.h @@ -21,10 +21,11 @@ #define IO_SPACE_LIMIT 0xffffffff -#define __io(a) (a) +#define __io(a) __iop13xx_io(a) #define __mem_pci(a) (a) #define __mem_isa(a) (a) +extern void __iomem * __iop13xx_io(unsigned long io_addr); extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size, unsigned long flags); -- cgit v1.2.3 From 1c9d3df5e88ad7db23f5b22f4341c39722a904a4 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 30 Dec 2006 16:08:50 +0100 Subject: [ARM] 4078/1: Fix ARM copypage cache coherency problems If PG_dcache_dirty is set for a page, we need to flush the source page before performing any copypage operation using a different virtual address. This fixes the copypage implementations for XScale, StrongARM and ARMv6. This patch fixes segmentation faults seen in the dynamic linker under the usage patterns in glibc 2.4/2.5. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 378a3a2ce8d..d51049522cd 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -355,6 +355,8 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, */ extern void flush_dcache_page(struct page *); +extern void __flush_dcache_page(struct address_space *mapping, struct page *page); + #define flush_dcache_mmap_lock(mapping) \ write_lock_irq(&(mapping)->tree_lock) #define flush_dcache_mmap_unlock(mapping) \ -- cgit v1.2.3 From 52e88f5d4a6b06f3a945728dd3bc403632afe069 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 29 Dec 2006 16:47:10 -0800 Subject: [PATCH] change WARN_ON back to "BUG: at ..." WARN_ON() ever triggering is a kernel bug. Do not try to paper over this fact by suggesting to the user that this is 'only' a warning, as the following recent commit does: commit 30e25b71e725b150585e17888b130e3324f8cf7c Author: Jeremy Fitzhardinge Date: Fri Dec 8 02:36:24 2006 -0800 [PATCH] Fix generic WARN_ON message A warning is a warning, not a BUG. ( it might make sense to rename BUG() to CRASH() and BUG_ON() to CRASH_ON(), but that does not change the fact that WARN_ON() signals a kernel bug. ) i and others objected to this change during lkml review: http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2 still the change slipped upstream - grumble :) Also, use the standard "BUG: " format to make it easier to grep logs and to make it easier to google for kernel bugs. Signed-off-by: Ingo Molnar Cc: Jeremy Fitzhardinge Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/bug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index a06eecd4829..14fae1fa87d 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -35,7 +35,7 @@ struct bug_entry { #define WARN_ON(condition) ({ \ typeof(condition) __ret_warn_on = (condition); \ if (unlikely(__ret_warn_on)) { \ - printk("WARNING at %s:%d %s()\n", __FILE__, \ + printk("BUG: at %s:%d %s()\n", __FILE__, \ __LINE__, __FUNCTION__); \ dump_stack(); \ } \ -- cgit v1.2.3 From 4b1badf5d9ddfc46ad075ca5bfc465972c85cc7c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 29 Dec 2006 16:48:39 -0800 Subject: [PATCH] SPI: define null tx_buf to mean "shift out zeroes" Some issues were recently turned up with the current specification of what it means for spi_transfer.tx_buf to be null, as part of transfers which are (from the SPI protocol driver perspective) pure reads. Specifically, that it seems better to change the TX behaviour there from "undefined" to "will shift zeroes". This lets protocol drivers (like the ads7846 driver) depend on that behavior. It's what most controller drivers in the tree are already doing (with one exception and one case of driver wanting-to-oops), it's what Microwire hardware will necessarily be doing, and it removes an issue whereby certain security audits would need to define such a value anyway as part of removing covert channels. This patch changes the specification to require shifting zeroes, and updates all currently merged SPI controller drivers to do so. Signed-off-by: David Brownell Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index c8bb68099eb..176f6e36dbf 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -289,7 +289,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * the data being transferred; that may reduce overhead, when the * underlying driver uses dma. * - * If the transmit buffer is null, undefined data will be shifted out + * If the transmit buffer is null, zeroes will be shifted out * while filling rx_buf. If the receive buffer is null, the data * shifted in will be discarded. Only "len" bytes shift out (or in). * It's an error to try to shift out a partial word. (For example, by -- cgit v1.2.3 From 089e34b60033863549fbe561d31ac8c778a20e7f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 29 Dec 2006 16:49:04 -0800 Subject: [PATCH] cpuset procfs warning fix fs/proc/base.c:1869: warning: initialization discards qualifiers from pointer target type fs/proc/base.c:2150: warning: initialization discards qualifiers from pointer target type Cc: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpuset.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 826b15e914e..fd404416f31 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -55,7 +55,7 @@ extern int cpuset_excl_nodes_overlap(const struct task_struct *p); extern int cpuset_memory_pressure_enabled; extern void __cpuset_memory_pressure_bump(void); -extern const struct file_operations proc_cpuset_operations; +extern struct file_operations proc_cpuset_operations; extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer); extern void cpuset_lock(void); -- cgit v1.2.3 From e3a411a3dfc1d633504aa63efab32b7e00318454 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Dec 2006 21:01:32 -0800 Subject: [SPARC64]: Fix of_iounmap() region release. We need to pass in the resource otherwise we cannot release the region properly. We must know whether it is an I/O or MEM resource. Spotted by Eric Brower. Signed-off-by: David S. Miller --- include/asm-sparc/of_device.h | 2 +- include/asm-sparc64/of_device.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-sparc/of_device.h b/include/asm-sparc/of_device.h index 80ea31f6e17..7cb00c1b09c 100644 --- a/include/asm-sparc/of_device.h +++ b/include/asm-sparc/of_device.h @@ -33,7 +33,7 @@ struct of_device #define to_of_device(d) container_of(d, struct of_device, dev) extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); -extern void of_iounmap(void __iomem *base, unsigned long size); +extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); extern struct of_device *of_find_device_by_node(struct device_node *); diff --git a/include/asm-sparc64/of_device.h b/include/asm-sparc64/of_device.h index a62c7b997d6..60e9173c9ac 100644 --- a/include/asm-sparc64/of_device.h +++ b/include/asm-sparc64/of_device.h @@ -34,7 +34,7 @@ struct of_device #define to_of_device(d) container_of(d, struct of_device, dev) extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); -extern void of_iounmap(void __iomem *base, unsigned long size); +extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); extern struct of_device *of_find_device_by_node(struct device_node *); -- cgit v1.2.3 From e44c39bd8478bf9e41cbc611c74b5879a7b29f58 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Dec 2006 21:14:52 -0800 Subject: [NET]: Add memory barrrier to netif_poll_enable() When a driver writer calls this, they generally expect that all previous stores and modifications they've made will be visible before netif_poll_enable() executes, so ensure this. Noticed by Ben H. Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 6be767c76b3..fea0d9db684 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -906,6 +906,7 @@ static inline void netif_poll_disable(struct net_device *dev) static inline void netif_poll_enable(struct net_device *dev) { + smp_mb__before_clear_bit(); clear_bit(__LINK_STATE_RX_SCHED, &dev->state); } -- cgit v1.2.3 From cb4db4c22182163f66325053331a4e7096f663cd Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 28 Dec 2006 21:21:55 -0800 Subject: [NET]: Don't export linux/random.h outside __KERNEL__. Don't add it there please; add it lower down inside the existing #ifdef __KERNEL__. You just made the _userspace_ net.h include random.h, which then fails to compile unless was already included. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- include/linux/net.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/net.h b/include/linux/net.h index 6f0dfeba509..f28d8a2e2c9 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -19,7 +19,6 @@ #define _LINUX_NET_H #include -#include #include struct poll_table_struct; @@ -57,6 +56,7 @@ typedef enum { #ifdef __KERNEL__ #include +#include #define SOCK_ASYNC_NOSPACE 0 #define SOCK_ASYNC_WAITDATA 1 -- cgit v1.2.3 From 9a654b522234615a76717f35365ca4a8beb757df Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Thu, 21 Dec 2006 12:11:43 -0500 Subject: ACPI: increase ACPI_MAX_REFERENCE_COUNT for larger systems We have some new larger ia64 systems in HP that trip over the ACPI_MAX_REFERENCE_COUNT limit which triggers a large number of these debug messages: ACPI Warning (utdelete-0397): Large Reference Count (XXX) in object e0000a0ff6797ab0 [20060707] This was increased once in the past as described in this very brief thread: http://www.mail-archive.com/linux-acpi@vger.kernel.org/msg00890.html Signed-off-by: Doug Chapman Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 9e6c23c360b..ebc1f697615 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -105,7 +105,7 @@ /* Maximum object reference count (detects object deletion issues) */ -#define ACPI_MAX_REFERENCE_COUNT 0x800 +#define ACPI_MAX_REFERENCE_COUNT 0x1000 /* Size of cached memory mapping for system memory operation region */ -- cgit v1.2.3 From f566b2b22d89c4785f25e6e4d60163b5ae6251f4 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 2 Jan 2007 20:59:38 +0100 Subject: [ARM] 4080/1: Fix for the SSCR0_SlotsPerFrm macro The SSCR0_SlotsPerFrm macro writes a 3-bit value to bits [2:0], while the correct location of FRDC in SSCR0 is at bits [26:24]. This patch adds the missing "<< 24". Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 083e03c5639..f8f34505f47 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1626,7 +1626,7 @@ #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ -#define SSCR0_SlotsPerFrm(x) ((x) - 1) /* Time slots per frame [1..8] */ +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ #define SSCR0_ADC (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif -- cgit v1.2.3 From d02b161eda65528ad3e89d642e416c265c17ceb8 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 2 Jan 2007 21:06:57 +0100 Subject: [ARM] 4081/1: Add definition for TI Sync Serial Protocol Of the possible SSP frame formats (FRF bits in SSCR0), only SSCR0_PSP is defined. Other possible formats are Motorola SPI (0<<4), TI SSP (1<<4) and Microwire (2<<4). Attached patch adds a definition SSCR0_TISSP. This mode is used for the sound codec attached to the PXA272 SSP1 of some HTC PDA phones. Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index f8f34505f47..e24f6b6c79a 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1655,6 +1655,7 @@ #define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ +#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ #define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ #define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ #define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ -- cgit v1.2.3 From 3eb546057dd65ec75c900c9948684ffd5e617630 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Mon, 18 Dec 2006 17:26:13 +0800 Subject: [PATCH] ieee80211: WLAN_GET_SEQ_SEQ fix (select correct region) The WLAN_GET_SEQ_SEQ(seq) macro in ieee80211 is selecting the wrong region. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- include/net/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index e6af381e206..e02d85f56e6 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -218,7 +218,7 @@ struct ieee80211_snap_hdr { #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE) #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG) -#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ) +#define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 -- cgit v1.2.3 From 7f18ba6248625a587559ed1206d12ccaa3ad045e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 3 Jan 2007 18:48:13 -0800 Subject: [X25]: proper prototype for x25_init_timers() This patch adds a proper prototype for x25_init_timers() in include/net/x25.h Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- include/net/x25.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/x25.h b/include/net/x25.h index 0ad90ebcf86..e47fe440d9d 100644 --- a/include/net/x25.h +++ b/include/net/x25.h @@ -259,6 +259,7 @@ extern int x25_decode(struct sock *, struct sk_buff *, int *, int *, int *, int extern void x25_disconnect(struct sock *, int, unsigned char, unsigned char); /* x25_timer.c */ +extern void x25_init_timers(struct sock *sk); extern void x25_start_heartbeat(struct sock *); extern void x25_start_t2timer(struct sock *); extern void x25_start_t21timer(struct sock *); -- cgit v1.2.3 From 3948ec9406f9a60a43d63f23f6f5284db6529b9c Mon Sep 17 00:00:00 2001 From: John Keller Date: Fri, 22 Dec 2006 11:50:04 -0600 Subject: ACPI: Altix: ACPI _PRT support Provide ACPI _PRT support for SN Altix systems. The SN Altix platform does not conform to the IOSAPIC IRQ routing model, so a new acpi_irq_model (ACPI_IRQ_MODEL_PLATFORM) has been defined. The SN platform specific code sets acpi_irq_model to this new value, and keys off of it in acpi_register_gsi() to avoid the iosapic code path. Signed-off-by: John Keller Signed-off-by: Len Brown --- include/linux/acpi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 2b0c955590f..91f1f236387 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -47,6 +47,7 @@ enum acpi_irq_model_id { ACPI_IRQ_MODEL_PIC = 0, ACPI_IRQ_MODEL_IOAPIC, ACPI_IRQ_MODEL_IOSAPIC, + ACPI_IRQ_MODEL_PLATFORM, ACPI_IRQ_MODEL_COUNT }; -- cgit v1.2.3 From 0d630cc0a6cb8ad544b5913a26ff1349ed7c8587 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Jan 2007 12:25:16 -0800 Subject: [TCP]: Use old definition of before This reverts the new (unambiguous) definition of the TCP `before' relation. As pointed out in an example by Herbert Xu, there is existing code which implicitly requires the old definition in order to work correctly. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller --- include/net/tcp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/tcp.h b/include/net/tcp.h index b7d8317f22a..cd8fa0c858a 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -242,7 +242,7 @@ extern int tcp_memory_pressure; static inline int before(__u32 seq1, __u32 seq2) { - return (__s32)(seq2-seq1) > 0; + return (__s32)(seq1-seq2) < 0; } #define after(seq2, seq1) before(seq1, seq2) -- cgit v1.2.3 From bb0958544f3c7c016b2a3025ab3694363e403aa1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 4 Jan 2007 15:03:18 +0800 Subject: ACPI: use more understandable bus_id for ACPI devices Some of the ACPI devices use the internal fake hids which are exposed to userspace as devces' bus_id after sysfs conversion. To make it more friendly, we convert them to more understandable strings. For those devices w/o PNPids, we use "device:instance_no" as the bus_id instead of "PNPIDNON:instance_no". Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- include/acpi/acpi_bus.h | 2 +- include/acpi/acpi_drivers.h | 16 ++++++++-------- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index a6b4037beea..e7df8423d15 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -184,7 +184,7 @@ struct acpi_device_dir { typedef char acpi_bus_id[5]; typedef unsigned long acpi_bus_address; -typedef char acpi_hardware_id[9]; +typedef char acpi_hardware_id[15]; typedef char acpi_unique_id[9]; typedef char acpi_device_name[40]; typedef char acpi_device_class[20]; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 2781e662864..1b18c36da78 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -36,14 +36,14 @@ /* _HID definitions */ -#define ACPI_POWER_HID "ACPI_PWR" -#define ACPI_PROCESSOR_HID "ACPI_CPU" -#define ACPI_SYSTEM_HID "ACPI_SYS" -#define ACPI_THERMAL_HID "ACPI_THM" -#define ACPI_BUTTON_HID_POWERF "ACPI_FPB" -#define ACPI_BUTTON_HID_SLEEPF "ACPI_FSB" - -#define ACPI_VIDEO_HID "ACPI_VID" +#define ACPI_POWER_HID "power_resource" +#define ACPI_PROCESSOR_HID "processor" +#define ACPI_SYSTEM_HID "acpi_system" +#define ACPI_THERMAL_HID "thermal" +#define ACPI_BUTTON_HID_POWERF "button_power" +#define ACPI_BUTTON_HID_SLEEPF "button_sleep" +#define ACPI_VIDEO_HID "video" +#define ACPI_BAY_HID "bay" /* -------------------------------------------------------------------------- PCI -------------------------------------------------------------------------- */ -- cgit v1.2.3 From dd2c565999e015004622425020a61593deb87a04 Mon Sep 17 00:00:00 2001 From: Adam Megacz Date: Fri, 5 Jan 2007 16:36:17 -0800 Subject: [PATCH] Add AFS_SUPER_MAGIC to magic.h Jeffrey Altman, one of the gatekeepers of OpenAFS (the open source project which inherited the Transarc/IBM AFS codebase) has requested that the magic number 0x5346414F (little endian 'OAFS') be allocated for the f_type field of the fsinfo structure on Linux: https://lists.openafs.org/pipermail/openafs-info/2006-December/024829.html Add it to include/linux/magic.h, mostly as a way of publishing this number and ensuring that no other filesystem accidentally uses it. Cc: Jeffrey Altman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/magic.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/magic.h b/include/linux/magic.h index 156c40fc664..b78bbf42135 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -3,6 +3,7 @@ #define ADFS_SUPER_MAGIC 0xadf5 #define AFFS_SUPER_MAGIC 0xadff +#define AFS_SUPER_MAGIC 0x5346414F #define AUTOFS_SUPER_MAGIC 0x0187 #define CODA_SUPER_MAGIC 0x73757245 #define EFS_SUPER_MAGIC 0x414A53 -- cgit v1.2.3 From c1150d8cf9e9d2b356fab52d79f2366985e5511b Mon Sep 17 00:00:00 2001 From: Dor Laor Date: Fri, 5 Jan 2007 16:36:24 -0800 Subject: [PATCH] KVM: Improve interrupt response The current interrupt injection mechanism might delay an interrupt under the following circumstances: - if injection fails because the guest is not interruptible (rflags.IF clear, or after a 'mov ss' or 'sti' instruction). Userspace can check rflags, but the other cases or not testable under the current API. - if injection fails because of a fault during delivery. This probably never happens under normal guests. - if injection fails due to a physical interrupt causing a vmexit so that it can be handled by the host. In all cases the guest proceeds without processing the interrupt, reducing the interactive feel and interrupt throughput of the guest. This patch fixes the situation by allowing userspace to request an exit when the 'interrupt window' opens, so that it can re-inject the interrupt at the right time. Guest interactivity is very visibly improved. Signed-off-by: Dor Laor Signed-off-by: Avi Kivity Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kvm.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 28fdce1ac1d..bc8b4616bad 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -11,7 +11,7 @@ #include #include -#define KVM_API_VERSION 1 +#define KVM_API_VERSION 2 /* * Architectural interrupt line count, and the size of the bitmap needed @@ -45,6 +45,7 @@ enum kvm_exit_reason { KVM_EXIT_DEBUG = 4, KVM_EXIT_HLT = 5, KVM_EXIT_MMIO = 6, + KVM_EXIT_IRQ_WINDOW_OPEN = 7, }; /* for KVM_RUN */ @@ -53,11 +54,19 @@ struct kvm_run { __u32 vcpu; __u32 emulated; /* skip current instruction */ __u32 mmio_completed; /* mmio request completed */ + __u8 request_interrupt_window; + __u8 padding1[3]; /* out */ __u32 exit_type; __u32 exit_reason; __u32 instruction_length; + __u8 ready_for_interrupt_injection; + __u8 if_flag; + __u16 padding2; + __u64 cr8; + __u64 apic_base; + union { /* KVM_EXIT_UNKNOWN */ struct { -- cgit v1.2.3 From 7bf236874292fd073c6bdd27f89c3d9e81a79cbc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 5 Jan 2007 16:36:28 -0800 Subject: [PATCH] swsusp: Do not fail if resume device is not set In the kernels later than 2.6.19 there is a regression that makes swsusp fail if the resume device is not explicitly specified. It can be fixed by adding an additional parameter to mm/swapfile.c:swap_type_of() allowing us to pass the (struct block_device *) corresponding to the first available swap back to the caller. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/swap.h b/include/linux/swap.h index add51cebc8d..5423559a44a 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -245,7 +245,7 @@ extern int swap_duplicate(swp_entry_t); extern int valid_swaphandles(swp_entry_t, unsigned long *); extern void swap_free(swp_entry_t); extern void free_swap_and_cache(swp_entry_t); -extern int swap_type_of(dev_t, sector_t); +extern int swap_type_of(dev_t, sector_t, struct block_device **); extern unsigned int count_swap_pages(int, int); extern sector_t map_swap_page(struct swap_info_struct *, pgoff_t); extern sector_t swapdev_block(int, pgoff_t); -- cgit v1.2.3 From dd0ec16fa6cf2498b831663a543e1b67fce6e155 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Fri, 5 Jan 2007 16:36:30 -0800 Subject: [PATCH] i386: Restore CONFIG_PHYSICAL_START option o Relocatable bzImage support had got rid of CONFIG_PHYSICAL_START option thinking that now this option is not required as people can build a second kernel as relocatable and load it anywhere. So need of compiling the kernel for a custom address was gone. But Magnus uses vmlinux images for second kernel in Xen environment and he wants to continue to use it. o Restoring the CONFIG_PHYSICAL_START option for the time being. I think down the line we can get rid of it. Signed-off-by: Vivek Goyal Cc: "Eric W. Biederman" Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/boot.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-i386/boot.h b/include/asm-i386/boot.h index 8ce79a6fa89..e7686d0a841 100644 --- a/include/asm-i386/boot.h +++ b/include/asm-i386/boot.h @@ -13,7 +13,8 @@ #define ASK_VGA 0xfffd /* ask for it at bootup */ /* Physical address where kenrel should be loaded. */ -#define LOAD_PHYSICAL_ADDR ((0x100000 + CONFIG_PHYSICAL_ALIGN - 1) \ +#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \ + + (CONFIG_PHYSICAL_ALIGN - 1)) \ & ~(CONFIG_PHYSICAL_ALIGN - 1)) #endif /* _LINUX_BOOT_H */ -- cgit v1.2.3 From 4ac941d2d04ef26a91adf677f3a371818596305d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 4 Jan 2007 02:14:49 +0100 Subject: [ARM] 4082/1: iop3xx: fix iop33x gpio register offset iop33x gpio offset is correct in include/asm-arm/arch-iop33x/iop33x.h, but include/asm-arm/hardware/iop3xx.h adds 4. Signed-off-by: Dan Williams Signed-off-by: Russell King --- include/asm-arm/arch-iop32x/iop32x.h | 2 +- include/asm-arm/hardware/iop3xx.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h index 4bbd85f3ed2..2e9469047eb 100644 --- a/include/asm-arm/arch-iop32x/iop32x.h +++ b/include/asm-arm/arch-iop32x/iop32x.h @@ -19,7 +19,7 @@ * Peripherals that are shared between the iop32x and iop33x but * located at different addresses. */ -#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c0 + (reg)) +#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg)) #define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) #include diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index 1018a7486ab..13ac8a4cd01 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -168,9 +168,9 @@ extern void gpio_line_set(int line, int value); #define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710) /* General Purpose I/O */ -#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0004) -#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0008) -#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x000c) +#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000) +#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004) +#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008) /* Timers */ #define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) -- cgit v1.2.3 From a6f36be32622730710b2fadacb6e2649defa4371 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 30 Dec 2006 22:24:19 +0000 Subject: [ARM] pass vma for flush_anon_page() Since get_user_pages() may be used with processes other than the current process and calls flush_anon_page(), flush_anon_page() has to cope in some way with non-current processes. It may not be appropriate, or even desirable to flush a region of virtual memory cache in the current process when that is different to the process that we want the flush to occur for. Therefore, pass the vma into flush_anon_page() so that the architecture can work out whether the 'vmaddr' is for the current process or not. Signed-off-by: Russell King --- include/asm-parisc/cacheflush.h | 2 +- include/linux/highmem.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h index aedb0512cb0..a799dd8ef39 100644 --- a/include/asm-parisc/cacheflush.h +++ b/include/asm-parisc/cacheflush.h @@ -186,7 +186,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long } static inline void -flush_anon_page(struct page *page, unsigned long vmaddr) +flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr) { if (PageAnon(page)) flush_user_dcache_page(vmaddr); diff --git a/include/linux/highmem.h b/include/linux/highmem.h index ca9a602cffd..645d440807c 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -8,7 +8,7 @@ #include #ifndef ARCH_HAS_FLUSH_ANON_PAGE -static inline void flush_anon_page(struct page *page, unsigned long vmaddr) +static inline void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr) { } #endif -- cgit v1.2.3 From 6020dff09252e3670a89edb36baaa4afb9b10d15 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 30 Dec 2006 23:17:40 +0000 Subject: [ARM] Resolve fuse and direct-IO failures due to missing cache flushes fuse does not work on ARM due to cache incoherency issues - fuse wants to use get_user_pages() to copy data from the current process into kernel space. However, since this accesses userspace via the kernel mapping, the kernel mapping can be out of date wrt data written to userspace. This can lead to unpredictable behaviour (in the case of fuse) or data corruption for direct-IO. This resolves debian bug #402876 Signed-off-by: Russell King --- include/asm-arm/cacheflush.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index d51049522cd..5f531ea0305 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -357,6 +357,16 @@ extern void flush_dcache_page(struct page *); extern void __flush_dcache_page(struct address_space *mapping, struct page *page); +#define ARCH_HAS_FLUSH_ANON_PAGE +static inline void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long vmaddr) +{ + extern void __flush_anon_page(struct vm_area_struct *vma, + struct page *, unsigned long); + if (PageAnon(page)) + __flush_anon_page(vma, page, vmaddr); +} + #define flush_dcache_mmap_lock(mapping) \ write_lock_irq(&(mapping)->tree_lock) #define flush_dcache_mmap_unlock(mapping) \ -- cgit v1.2.3 From f860c90bd6ce22c6a0a352cc16acc74fba3d628e Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 13 Dec 2006 01:22:06 +0900 Subject: [MIPS] csum_partial and copy in parallel Implement optimized asm version of csum_partial_copy_nocheck, csum_partial_copy_from_user and csum_and_copy_to_user which can do calculate and copy in parallel, based on memcpy.S. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/checksum.h | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h index 9b768c3b96b..24cdcc6eaab 100644 --- a/include/asm-mips/checksum.h +++ b/include/asm-mips/checksum.h @@ -29,31 +29,38 @@ */ __wsum csum_partial(const void *buff, int len, __wsum sum); +__wsum __csum_partial_copy_user(const void *src, void *dst, + int len, __wsum sum, int *err_ptr); + /* * this is a new version of the above that records errors it finds in *errp, * but continues and zeros the rest of the buffer. */ -__wsum csum_partial_copy_from_user(const void __user *src, - void *dst, int len, - __wsum sum, int *errp); +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, + __wsum sum, int *err_ptr) +{ + might_sleep(); + return __csum_partial_copy_user((__force void *)src, dst, + len, sum, err_ptr); +} /* * Copy and checksum to user */ #define HAVE_CSUM_COPY_USER -static inline __wsum csum_and_copy_to_user (const void *src, void __user *dst, - int len, __wsum sum, - int *err_ptr) +static inline +__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, + __wsum sum, int *err_ptr) { might_sleep(); - sum = csum_partial(src, len, sum); - - if (copy_to_user(dst, src, len)) { + if (access_ok(VERIFY_WRITE, dst, len)) + return __csum_partial_copy_user(src, (__force void *)dst, + len, sum, err_ptr); + if (len) *err_ptr = -EFAULT; - return (__force __wsum)-1; - } - return sum; + return (__force __wsum)-1; /* invalid checksum */ } /* -- cgit v1.2.3 From f9bba75e378776ee4e97adc0555db16695d341e1 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 8 Jan 2007 00:50:34 +0900 Subject: [MIPS] SMTC build fix Pass "irq" to __DO_IRQ_SMTC_HOOK() macro. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/irq.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h index 67657089efa..386da82e577 100644 --- a/include/asm-mips/irq.h +++ b/include/asm-mips/irq.h @@ -31,14 +31,14 @@ static inline int irq_canonicalize(int irq) * functions will take over re-enabling the low-level mask. * Otherwise it will be done on return from exception. */ -#define __DO_IRQ_SMTC_HOOK() \ +#define __DO_IRQ_SMTC_HOOK(irq) \ do { \ if (irq_hwmask[irq] & 0x0000ff00) \ write_c0_tccontext(read_c0_tccontext() & \ ~(irq_hwmask[irq] & 0x0000ff00)); \ } while (0) #else -#define __DO_IRQ_SMTC_HOOK() do { } while (0) +#define __DO_IRQ_SMTC_HOOK(irq) do { } while (0) #endif /* @@ -52,7 +52,7 @@ do { \ #define do_IRQ(irq) \ do { \ irq_enter(); \ - __DO_IRQ_SMTC_HOOK(); \ + __DO_IRQ_SMTC_HOOK(irq); \ generic_handle_irq(irq); \ irq_exit(); \ } while (0) -- cgit v1.2.3 From 007d88d042d7b71aa2c9fc615aef97888e20ddf3 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Jan 2007 18:45:34 +0000 Subject: [POWERPC] Fix manual assembly WARN_ON() in enter_rtas(). When we switched over to the generic BUG mechanism we forgot to change the assembly code which open-codes a WARN_ON() in enter_rtas(), so the bug table got corrupted. This patch provides an EMIT_BUG_ENTRY macro for use in assembly code, and uses it in entry_64.S. Tested with CONFIG_DEBUG_BUGVERBOSE on ppc64 but not without -- I tried to turn it off but it wouldn't go away; I suspect Aunt Tillie probably needed it. This version gets __FILE__ and __LINE__ right in the assembly version -- rather than saying include/asm-powerpc/bug.h line 21 every time which is a little suboptimal. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- include/asm-powerpc/bug.h | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h index 709568879f7..f6fa3947484 100644 --- a/include/asm-powerpc/bug.h +++ b/include/asm-powerpc/bug.h @@ -11,10 +11,31 @@ #define BUG_OPCODE .long 0x00b00b00 /* For asm */ #define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */ -#ifndef __ASSEMBLY__ - #ifdef CONFIG_BUG +#ifdef __ASSEMBLY__ +#ifdef CONFIG_DEBUG_BUGVERBOSE +.macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"a" +5001: PPC_LONG \addr, 5002f + .short \line, \flags + .org 5001b+BUG_ENTRY_SIZE + .previous + .section .rodata,"a" +5002: .asciz "\file" + .previous +.endm +#else + .macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"a" +5001: PPC_LONG \addr + .short \flags + .org 5001b+BUG_ENTRY_SIZE + .previous +.endm +#endif /* verbose */ + +#else /* !__ASSEMBLY__ */ /* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and sizeof(struct bug_entry), respectively */ #ifdef CONFIG_DEBUG_BUGVERBOSE @@ -91,8 +112,8 @@ #define HAVE_ARCH_BUG #define HAVE_ARCH_BUG_ON #define HAVE_ARCH_WARN_ON -#endif /* CONFIG_BUG */ #endif /* __ASSEMBLY __ */ +#endif /* CONFIG_BUG */ #include -- cgit v1.2.3 From 5c334eed6ecd66cebfbc80267149e755510d8bc8 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Tue, 2 Jan 2007 23:29:53 +0100 Subject: [POWERPC] 52xx: Don't use device_initcall to probe of_platform_bus Using device_initcall makes it happen for every platform that compiles this file in. This is really bad, for obvious reasons. Instead, we use the .init field of the machine description. If the platform needs the hook to do something specific it can provides its own function and call mpc52xx_declare_of_platform_devices from there. If not, the mpc52xx_declare_of_platform_devices function can directly be used as the init hook. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc52xx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h index 4a28a850998..4560d72fc75 100644 --- a/include/asm-powerpc/mpc52xx.h +++ b/include/asm-powerpc/mpc52xx.h @@ -244,6 +244,7 @@ struct mpc52xx_cdm { extern void __iomem * mpc52xx_find_and_map(const char *); extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); extern void mpc52xx_setup_cpu(void); +extern void mpc52xx_declare_of_platform_devices(void); extern void mpc52xx_init_irq(void); extern unsigned int mpc52xx_get_irq(void); -- cgit v1.2.3 From dc40127ca5c6e1da48d2b5f9d0c65b5795faac12 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 9 Jan 2007 02:43:02 +1100 Subject: [POWERPC] Fix bugs in the hypervisor call stats code There were a few issues with the HCALL_STATS code: - PURR cpu feature checks were backwards - We iterated one entry off the end of the hcall_stats array - Remove dead update_hcall_stats() function prototype I noticed one thing while debugging, and that is we call H_ENTER (to set up the MMU hashtable in early init) before we have done the cpu fixups. This means we will execute the PURR SPR reads even on a CPU that isnt capable of it. I wonder if we can move the CPU feature fixups earlier. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- include/asm-powerpc/hvcall.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h index 257d1cecb8c..7a500732b67 100644 --- a/include/asm-powerpc/hvcall.h +++ b/include/asm-powerpc/hvcall.h @@ -252,8 +252,6 @@ struct hcall_stats { unsigned long tb_total; /* total wall time (mftb) of calls. */ unsigned long purr_total; /* total cpu time (PURR) of calls. */ }; -void update_hcall_stats(unsigned long opcode, unsigned long tb_delta, - unsigned long purr_delta); #define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1) #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From d8ad075ef60ca33f1bd8e227eed2202108fd6cd8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Jan 2007 10:18:50 +0100 Subject: [S390] don't call handle_mm_fault() if in an atomic context. There are several places in the futex code where a spin_lock is held and still uaccesses happen. Deadlocks are avoided by increasing the preempt count. The pagefault handler will then not take any locks but will immediately search the fixup tables. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/futex.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-s390/futex.h b/include/asm-s390/futex.h index 5e261e1de67..5c5d02de49e 100644 --- a/include/asm-s390/futex.h +++ b/include/asm-s390/futex.h @@ -4,8 +4,8 @@ #ifdef __KERNEL__ #include +#include #include -#include static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) { @@ -21,7 +21,9 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) return -EFAULT; + pagefault_disable(); ret = uaccess.futex_atomic_op(op, uaddr, oparg, &oldval); + pagefault_enable(); if (!ret) { switch (cmp) { -- cgit v1.2.3 From a037b0a43f6abafc4f725f7c7f46d577d1c44c96 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 9 Jan 2007 10:57:25 +0100 Subject: [ALSA] version 1.0.14rc1 Signed-off-by: Jaroslav Kysela --- include/sound/version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/version.h b/include/sound/version.h index 2949b9b991b..20f7babad51 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by alsa/ksync script. */ #define CONFIG_SND_VERSION "1.0.14rc1" -#define CONFIG_SND_DATE " (Wed Dec 20 08:11:48 2006 UTC)" +#define CONFIG_SND_DATE " (Tue Jan 09 09:56:17 2007 UTC)" -- cgit v1.2.3 From 8c82d8df7060221f131c9ca5352fb613c14f857a Mon Sep 17 00:00:00 2001 From: Bart De Schuymer Date: Tue, 9 Jan 2007 14:33:11 -0800 Subject: [NETFILTER]: arp_tables: fix userspace compilation The included patch translates arpt_counters to xt_counters, making userspace arptables compile against recent kernels. Signed-off-by: Bart De Schuymer Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_arp/arp_tables.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h index 0be235418a2..24c8786d12e 100644 --- a/include/linux/netfilter_arp/arp_tables.h +++ b/include/linux/netfilter_arp/arp_tables.h @@ -190,6 +190,7 @@ struct arpt_replace /* The argument to ARPT_SO_ADD_COUNTERS. */ #define arpt_counters_info xt_counters_info +#define arpt_counters xt_counters /* The argument to ARPT_SO_GET_ENTRIES. */ struct arpt_get_entries -- cgit v1.2.3 From f79e7802153829e015dc2a60eb8b7444eb191b67 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 9 Jan 2007 14:34:14 -0800 Subject: [NETFILTER]: tcp conntrack: fix IP_CT_TCP_FLAG_CLOSE_INIT value IP_CT_TCP_FLAG_CLOSE_INIT is a flag and should have a value of 0x4 instead of 0x3, which is IP_CT_TCP_FLAG_WINDOW_SCALE | IP_CT_TCP_FLAG_SACK_PERM. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/nf_conntrack_tcp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 6b01ba29772..2f4e98b90cc 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -25,7 +25,7 @@ enum tcp_conntrack { #define IP_CT_TCP_FLAG_SACK_PERM 0x02 /* This sender sent FIN first */ -#define IP_CT_TCP_FLAG_CLOSE_INIT 0x03 +#define IP_CT_TCP_FLAG_CLOSE_INIT 0x04 #ifdef __KERNEL__ -- cgit v1.2.3 From 60d84f9739a47d0ed8e19805d9056e39fba31c79 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Fri, 22 Dec 2006 16:21:54 +0900 Subject: [MTD] OneNAND: add subpage write support OneNAND supports up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 62ca0f42982..fe3500d7d4b 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -88,6 +88,7 @@ struct onenand_bufferram { * operation is in progress * @state: [INTERN] the current state of the OneNAND device * @page_buf: data buffer + * @subpagesize: [INTERN] holds the subpagesize * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbm: [REPLACEABLE] pointer to Bad Block Management * @priv: [OPTIONAL] pointer to private chip date @@ -128,6 +129,7 @@ struct onenand_chip { onenand_state_t state; unsigned char *page_buf; + int subpagesize; struct nand_ecclayout *ecclayout; void *bbm; -- cgit v1.2.3 From a8de85d557004d6d4e4cf79ecd6b97339b986fe9 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 4 Jan 2007 09:51:26 +0200 Subject: [MTD] OneNAND: Implement read-while-load Read-while-load enables higher performance read operations. Signed-off-by: Adrian Hunter Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index fe3500d7d4b..f775a7af389 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -143,6 +143,7 @@ struct onenand_chip { #define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) +#define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1) #define ONENAND_GET_SYS_CFG1(this) \ (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) -- cgit v1.2.3 From 3eb3c740f51c2126b53c2dde974c1c57e634aa7b Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Wed, 10 Jan 2007 14:45:28 +0100 Subject: [PATCH] fix linux banner format string Revert previous attempts at messing with the linux banner string and simply use a separate format string for proc. Signed-off-by: Roman Zippel Acked-by: Olaf Hering Acked-by: Jean Delvare Cc: Andrey Borzenkov Cc: Andrew Morton Cc: Andy Whitcroft Cc: Herbert Poetzl Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index b0c4a05a4b0..63fb18dcac3 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -17,6 +17,9 @@ #include #include +extern const char linux_banner[]; +extern const char linux_proc_banner[]; + #define INT_MAX ((int)(~0U>>1)) #define INT_MIN (-INT_MAX - 1) #define UINT_MAX (~0U) -- cgit v1.2.3 From 24420760c3701ff422b344e047a20ca09b76fc64 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 11 Jan 2007 01:52:44 +0100 Subject: [PATCH] x86-64: Use different constraint for gcc < 4.1 in bitops.h +m is really correct for a RMW instruction, but some older gccs error out. I finally gave in and ifdefed it. This fixes compilation errors with some compiler version. Signed-off-by: Andi Kleen --- include/asm-x86_64/bitops.h | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/asm-x86_64/bitops.h b/include/asm-x86_64/bitops.h index 5b535eaf530..8da9609070f 100644 --- a/include/asm-x86_64/bitops.h +++ b/include/asm-x86_64/bitops.h @@ -7,7 +7,13 @@ #include -#define ADDR (*(volatile long *) addr) +#if __GNUC__ < 4 || __GNUC_MINOR__ < 1 +/* Technically wrong, but this avoids compilation errors on some gcc + versions. */ +#define ADDR "=m" (*(volatile long *) addr) +#else +#define ADDR "+m" (*(volatile long *) addr) +#endif /** * set_bit - Atomically set a bit in memory @@ -23,7 +29,7 @@ static __inline__ void set_bit(int nr, volatile void * addr) { __asm__ __volatile__( LOCK_PREFIX "btsl %1,%0" - :"+m" (ADDR) + :ADDR :"dIr" (nr) : "memory"); } @@ -40,7 +46,7 @@ static __inline__ void __set_bit(int nr, volatile void * addr) { __asm__ volatile( "btsl %1,%0" - :"+m" (ADDR) + :ADDR :"dIr" (nr) : "memory"); } @@ -58,7 +64,7 @@ static __inline__ void clear_bit(int nr, volatile void * addr) { __asm__ __volatile__( LOCK_PREFIX "btrl %1,%0" - :"+m" (ADDR) + :ADDR :"dIr" (nr)); } @@ -66,7 +72,7 @@ static __inline__ void __clear_bit(int nr, volatile void * addr) { __asm__ __volatile__( "btrl %1,%0" - :"+m" (ADDR) + :ADDR :"dIr" (nr)); } @@ -86,7 +92,7 @@ static __inline__ void __change_bit(int nr, volatile void * addr) { __asm__ __volatile__( "btcl %1,%0" - :"+m" (ADDR) + :ADDR :"dIr" (nr)); } @@ -103,7 +109,7 @@ static __inline__ void change_bit(int nr, volatile void * addr) { __asm__ __volatile__( LOCK_PREFIX "btcl %1,%0" - :"+m" (ADDR) + :ADDR :"dIr" (nr)); } @@ -121,7 +127,7 @@ static __inline__ int test_and_set_bit(int nr, volatile void * addr) __asm__ __volatile__( LOCK_PREFIX "btsl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"+m" (ADDR) + :"=r" (oldbit),ADDR :"dIr" (nr) : "memory"); return oldbit; } @@ -141,7 +147,7 @@ static __inline__ int __test_and_set_bit(int nr, volatile void * addr) __asm__( "btsl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"+m" (ADDR) + :"=r" (oldbit),ADDR :"dIr" (nr)); return oldbit; } @@ -160,7 +166,7 @@ static __inline__ int test_and_clear_bit(int nr, volatile void * addr) __asm__ __volatile__( LOCK_PREFIX "btrl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"+m" (ADDR) + :"=r" (oldbit),ADDR :"dIr" (nr) : "memory"); return oldbit; } @@ -180,7 +186,7 @@ static __inline__ int __test_and_clear_bit(int nr, volatile void * addr) __asm__( "btrl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"+m" (ADDR) + :"=r" (oldbit),ADDR :"dIr" (nr)); return oldbit; } @@ -192,7 +198,7 @@ static __inline__ int __test_and_change_bit(int nr, volatile void * addr) __asm__ __volatile__( "btcl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"+m" (ADDR) + :"=r" (oldbit),ADDR :"dIr" (nr) : "memory"); return oldbit; } @@ -211,7 +217,7 @@ static __inline__ int test_and_change_bit(int nr, volatile void * addr) __asm__ __volatile__( LOCK_PREFIX "btcl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"+m" (ADDR) + :"=r" (oldbit),ADDR :"dIr" (nr) : "memory"); return oldbit; } @@ -237,7 +243,7 @@ static __inline__ int variable_test_bit(int nr, volatile const void * addr) __asm__ __volatile__( "btl %2,%1\n\tsbbl %0,%0" :"=r" (oldbit) - :"m" (ADDR),"dIr" (nr)); + :"m" (*(volatile long *)addr),"dIr" (nr)); return oldbit; } -- cgit v1.2.3 From a2f3aa02576632cdb60bd3de1f4bf55e9ac65604 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Wed, 10 Jan 2007 23:15:30 -0800 Subject: [PATCH] Fix sparsemem on Cell Fix an oops experienced on the Cell architecture when init-time functions, early_*(), are called at runtime. It alters the call paths to make sure that the callers explicitly say whether the call is being made on behalf of a hotplug even, or happening at boot-time. It has been compile tested on ppc64, ia64, s390, i386 and x86_64. Acked-by: Arnd Bergmann Signed-off-by: Dave Hansen Cc: Yasunori Goto Acked-by: Andy Whitcroft Cc: Christoph Lameter Cc: Martin Schwidefsky Acked-by: Heiko Carstens Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 3 ++- include/linux/mmzone.h | 8 ++++++-- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/mm.h b/include/linux/mm.h index a17b147c61e..76912231af4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -978,7 +978,8 @@ extern int early_pfn_to_nid(unsigned long pfn); #endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */ #endif /* CONFIG_ARCH_POPULATES_NODE_MAP */ extern void set_dma_reserve(unsigned long new_dma_reserve); -extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long); +extern void memmap_init_zone(unsigned long, int, unsigned long, + unsigned long, enum memmap_context); extern void setup_per_zone_pages_min(void); extern void mem_init(void); extern void show_mem(void); diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index e339a7345f2..b262f47961f 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -450,9 +450,13 @@ void build_all_zonelists(void); void wakeup_kswapd(struct zone *zone, int order); int zone_watermark_ok(struct zone *z, int order, unsigned long mark, int classzone_idx, int alloc_flags); - +enum memmap_context { + MEMMAP_EARLY, + MEMMAP_HOTPLUG, +}; extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn, - unsigned long size); + unsigned long size, + enum memmap_context context); #ifdef CONFIG_HAVE_MEMORY_PRESENT void memory_present(int nid, unsigned long start, unsigned long end); -- cgit v1.2.3 From 07031e14c1127fc7e1a5b98dfcc59f434e025104 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 10 Jan 2007 23:15:38 -0800 Subject: [PATCH] KVM: add VM-exit profiling This adds the profile=kvm boot option, which enables KVM to profile VM exits. Use: "readprofile -m ./System.map | sort -n" to see the resulting output: [...] 18246 serial_out 148.3415 18945 native_flush_tlb 378.9000 23618 serial_in 212.7748 29279 __spin_unlock_irq 622.9574 43447 native_apic_write 2068.9048 52702 enable_8259A_irq 742.2817 54250 vgacon_scroll 89.3740 67394 ide_inb 6126.7273 79514 copy_page_range 98.1654 84868 do_wp_page 86.6000 140266 pit_read 783.6089 151436 ide_outb 25239.3333 152668 native_io_delay 21809.7143 174783 mask_and_ack_8259A 783.7803 362404 native_set_pte_at 36240.4000 1688747 total 0.5009 Signed-off-by: Ingo Molnar Acked-by: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/profile.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/profile.h b/include/linux/profile.h index 5670b340c4e..eec48f5f934 100644 --- a/include/linux/profile.h +++ b/include/linux/profile.h @@ -15,6 +15,7 @@ extern int prof_on __read_mostly; #define CPU_PROFILING 1 #define SCHED_PROFILING 2 #define SLEEP_PROFILING 3 +#define KVM_PROFILING 4 struct proc_dir_entry; struct pt_regs; -- cgit v1.2.3 From e3db7691e9f3dff3289f64e3d98583e28afe03db Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 10 Jan 2007 23:15:39 -0800 Subject: [PATCH] NFS: Fix race in nfs_release_page() NFS: Fix race in nfs_release_page() invalidate_inode_pages2() may find the dirty bit has been set on a page owing to the fact that the page may still be mapped after it was locked. Only after the call to unmap_mapping_range() are we sure that the page can no longer be dirtied. In order to fix this, NFS has hooked the releasepage() method and tries to write the page out between the call to unmap_mapping_range() and the call to remove_mapping(). This, however leads to deadlocks in the page reclaim code, where the page may be locked without holding a reference to the inode or dentry. Fix is to add a new address_space_operation, launder_page(), which will attempt to write out a dirty page without releasing the page lock. Signed-off-by: Trond Myklebust Also, the bare SetPageDirty() can skew all sort of accounting leading to other nasties. [akpm@osdl.org: cleanup] Signed-off-by: Peter Zijlstra Cc: Trond Myklebust Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 186da813541..14a337cc346 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -426,6 +426,7 @@ struct address_space_operations { /* migrate the contents of a page to the specified target */ int (*migratepage) (struct address_space *, struct page *, struct page *); + int (*launder_page) (struct page *); }; struct backing_dev_info; -- cgit v1.2.3 From f73ca1b76c6880b934d3ef566c1592efc80bb759 Mon Sep 17 00:00:00 2001 From: David Chinner Date: Wed, 10 Jan 2007 23:15:41 -0800 Subject: [PATCH] Revert bd_mount_mutex back to a semaphore Revert bd_mount_mutex back to a semaphore so that xfs_freeze -f /mnt/newtest; xfs_freeze -u /mnt/newtest works safely and doesn't produce lockdep warnings. (XFS unlocks the semaphore from a different task, by design. The mutex code warns about this) Signed-off-by: Dave Chinner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 14a337cc346..1410e5330c8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -459,7 +459,7 @@ struct block_device { struct inode * bd_inode; /* will die */ int bd_openers; struct mutex bd_mutex; /* open/close mutex */ - struct mutex bd_mount_mutex; /* mount mutex */ + struct semaphore bd_mount_sem; struct list_head bd_inodes; void * bd_holder; int bd_holders; -- cgit v1.2.3 From aae7d14f619c665b83e07013e3dda8694ea3e40b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 10 Jan 2007 23:15:45 -0800 Subject: [PATCH] FD_ZERO build fix unionfs managed to hit this on s390. Some architectures use __ptr_t in their FD_ZERO implementation. We don't have a __ptr_t. Switch them over to plain old void*. Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Al Viro Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: "Luck, Tony" Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Josef 'Jeff' Sipek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-alpha/posix_types.h | 2 +- include/asm-ia64/posix_types.h | 2 +- include/asm-powerpc/posix_types.h | 2 +- include/asm-s390/posix_types.h | 2 +- include/asm-xtensa/posix_types.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-alpha/posix_types.h b/include/asm-alpha/posix_types.h index c78c04a94f4..db167413300 100644 --- a/include/asm-alpha/posix_types.h +++ b/include/asm-alpha/posix_types.h @@ -49,7 +49,7 @@ typedef unsigned int __kernel_old_dev_t; #define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) #define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) #define __FD_ZERO(set) \ - ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set))) + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) #else /* __GNUC__ */ diff --git a/include/asm-ia64/posix_types.h b/include/asm-ia64/posix_types.h index adb62272694..17885567b73 100644 --- a/include/asm-ia64/posix_types.h +++ b/include/asm-ia64/posix_types.h @@ -54,7 +54,7 @@ typedef unsigned int __kernel_old_dev_t; #define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) #define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) #define __FD_ZERO(set) \ - ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set))) + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) # else /* !__GNUC__ */ diff --git a/include/asm-powerpc/posix_types.h b/include/asm-powerpc/posix_types.h index c6391077224..2f2288f520b 100644 --- a/include/asm-powerpc/posix_types.h +++ b/include/asm-powerpc/posix_types.h @@ -60,7 +60,7 @@ typedef struct { #define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) #define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) #define __FD_ZERO(set) \ - ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set))) + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) #else /* __GNUC__ */ diff --git a/include/asm-s390/posix_types.h b/include/asm-s390/posix_types.h index b94c98856e1..397d93fba3a 100644 --- a/include/asm-s390/posix_types.h +++ b/include/asm-s390/posix_types.h @@ -104,7 +104,7 @@ static inline int __FD_ISSET(unsigned long fd, const __kernel_fd_set *fdsetp) #undef __FD_ZERO #define __FD_ZERO(fdsetp) \ - ((void) memset ((__ptr_t) (fdsetp), 0, sizeof (__kernel_fd_set))) + ((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set))) #endif /* __KERNEL__ */ diff --git a/include/asm-xtensa/posix_types.h b/include/asm-xtensa/posix_types.h index 3470b44c12c..4ad77dda6d5 100644 --- a/include/asm-xtensa/posix_types.h +++ b/include/asm-xtensa/posix_types.h @@ -60,7 +60,7 @@ typedef struct { #define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) #define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) #define __FD_ZERO(set) \ - ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set))) + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) #else /* __GNUC__ */ -- cgit v1.2.3 From 6f949909e8f9e5d7e5584dc48d9a5e060c52aed1 Mon Sep 17 00:00:00 2001 From: Philip Langdale Date: Thu, 4 Jan 2007 07:04:47 -0800 Subject: mmc: Correct definition of R6 During development of SDHC support, it was discovered that the definition for R6 was incorrect. This patch fixes that and patches the drivers that do switch on the response type. Signed-off-by: Philip Langdale Cc: Alex Dubov Cc: Pavel Pisa Signed-off-by: Pierre Ossman --- include/linux/mmc/mmc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index a3594dfd696..bcf24909d67 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -42,7 +42,7 @@ struct mmc_command { #define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY) #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) #define MMC_RSP_R3 (MMC_RSP_PRESENT) -#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC) +#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE)) -- cgit v1.2.3 From 412297d31d439ba56cd4faeb3a49a6f569f40702 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 7 Jan 2007 08:51:05 -0300 Subject: V4L/DVB (5023): Fix compilation on ppc32 architecture There's a problem, pointed by Meelis Roos , that, on ppc32 arch, with some gcc versions (noticed with prerelease 4.1.2 20061115), compilation fails, due the lack of __ucmpdi2 to do the required 64-bit comparision. This patch takes some sugestions made by Andrew Morton , Stelian Pop and Segher Boessenkool Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5cb380a559f..d94e2683be5 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -662,6 +662,15 @@ typedef __u64 v4l2_std_id; #define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) #define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) +/* FIXME: + Although std_id is 64 bits, there is an issue on PPC32 architecture that + makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding + this value to 32 bits. + As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide), + it should work fine. However, if needed to add more than two standards, + v4l2-common.c should be fixed. + */ + /* some merged standards */ #define V4L2_STD_MN (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC) #define V4L2_STD_B (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B) -- cgit v1.2.3 From 501e0c500217e38276d61445ee0839b3f2c66d05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Jan 2007 11:34:02 +0900 Subject: libata: initialize qc->dma_dir to DMA_NONE libata didn't used to init qc->dma_dir to any specific value on qc initialization and command translation path didn't set qc->dma_dir if the command doesn't need data transfer. This made non-data commands to have random qc->dma_dir. This usually doesn't cause problem because LLDs usually check qc->protocol first and look at qc->dma_dir iff the command needs data transfer but this doesn't hold for all LLDs. It might be worthwhile to rename qc->dma_dir to qc->data_dir as we use the field to tag data direction for both PIO and DMA protocols. This problem has been spotted by James Bottomley. Signed-off-by: Tejun Heo Cc: James Bottomley Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index ab275483032..e53a13ba7f7 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1143,6 +1143,7 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) static inline void ata_qc_reinit(struct ata_queued_cmd *qc) { + qc->dma_dir = DMA_NONE; qc->__sg = NULL; qc->flags = 0; qc->cursect = qc->cursg = qc->cursg_ofs = 0; -- cgit v1.2.3 From f7ebf99eb489a02dba2e5a071fde9f5354275a50 Mon Sep 17 00:00:00 2001 From: Simon Budig Date: Mon, 15 Jan 2007 18:34:32 +0100 Subject: HID: add missing RX, RZ and RY enum values to hid-debug output This trivial change adds some missing enum values to the hid-debug output. Signed-off-by: Simon Budig Signed-off-by: Jiri Kosina --- include/linux/hid-debug.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h index f04d6d75c09..8e4dbb51fc7 100644 --- a/include/linux/hid-debug.h +++ b/include/linux/hid-debug.h @@ -700,9 +700,10 @@ static char *keys[KEY_MAX + 1] = { static char *relatives[REL_MAX + 1] = { [REL_X] = "X", [REL_Y] = "Y", - [REL_Z] = "Z", [REL_HWHEEL] = "HWheel", - [REL_DIAL] = "Dial", [REL_WHEEL] = "Wheel", - [REL_MISC] = "Misc", + [REL_Z] = "Z", [REL_RX] = "Rx", + [REL_RY] = "Ry", [REL_RZ] = "Rz", + [REL_HWHEEL] = "HWheel", [REL_DIAL] = "Dial", + [REL_WHEEL] = "Wheel", [REL_MISC] = "Misc", }; static char *absolutes[ABS_MAX + 1] = { -- cgit v1.2.3 From 434f98c48fc1d2a1f562a28a1562a7b53e940957 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Wed, 17 Jan 2007 10:50:20 -0600 Subject: [POWERPC] atomic_dec_if_positive sign extension fix On 64-bit machines, if an atomic counter is explicitly set to a negative value, the atomic_dec_if_positive function will decrement and store the next smallest value in the atomic counter, contrary to its intended operation. The comparison to determine if the decrement will make the result negative was done by the "addic." instruction, which operates on a 64-bit value, namely the zero-extended word loaded from the atomic variable. This patch uses an explicit word compare (cmpwi) and changes the addic. to an addi (also changing "=&r" to "=&b" so that r0 isn't used, and addi doesn't become li). This also fixes a bug for both 32-bit and 64-bit in that previously 0x80000000 was considered positive, since the result after decrementing is positive. Now it is considered negative. Also, I clarify the return value in the comments just to make it clear that the value returned is always the decremented value, even if that value is not stored back to the atomic counter. Signed-off-by: Robert Jennings Signed-off-by: Paul Mackerras --- include/asm-powerpc/atomic.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h index 53283e2540b..f038e33e6d4 100644 --- a/include/asm-powerpc/atomic.h +++ b/include/asm-powerpc/atomic.h @@ -207,7 +207,8 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) /* * Atomically test *v and decrement if it is greater than 0. - * The function returns the old value of *v minus 1. + * The function returns the old value of *v minus 1, even if + * the atomic variable, v, was not decremented. */ static __inline__ int atomic_dec_if_positive(atomic_t *v) { @@ -216,14 +217,15 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) __asm__ __volatile__( LWSYNC_ON_SMP "1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ - addic. %0,%0,-1\n\ + cmpwi %0,1\n\ + addi %0,%0,-1\n\ blt- 2f\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" ISYNC_ON_SMP "\n\ -2:" : "=&r" (t) +2:" : "=&b" (t) : "r" (&v->counter) : "cc", "memory"); -- cgit v1.2.3 From 9ee79a3d372fcb6729893437f4923c5efd1f85db Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 22 Jan 2007 09:18:31 -0600 Subject: [PATCH] x86: fix PDA variables to work during boot The current PDA code, which went in in post 2.6.19 has a flaw in that it doesn't correctly cycle the GDT and %GS segment through the boot PDA, the CPU PDA and finally the per-cpu PDA. The bug generally doesn't show up if the boot CPU id is zero, but everything falls apart for a non zero boot CPU id. The basically kills voyager which is perfectly capable of doing non zero CPU id boots, so voyager currently won't boot without this. The fix is to be careful and actually do the GDT setups correctly. Signed-off-by: James Bottomley Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/processor.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h index a52d6544042..359f10b54f5 100644 --- a/include/asm-i386/processor.h +++ b/include/asm-i386/processor.h @@ -743,6 +743,7 @@ extern void enable_sep_cpu(void); extern int sysenter_setup(void); extern int init_gdt(int cpu, struct task_struct *idle); +extern void cpu_set_gdt(int); extern void secondary_cpu_init(void); #endif /* __ASM_I386_PROCESSOR_H */ -- cgit v1.2.3 From b3a242b75361936ab9a42c42c44ea35e79a9d4cd Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 11 Jan 2007 14:49:44 +0100 Subject: more ftape removal This patch removes some more ftape code. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- include/linux/Kbuild | 1 - include/linux/mtio.h | 146 ------------------------- include/linux/qic117.h | 290 ------------------------------------------------- 3 files changed, 437 deletions(-) delete mode 100644 include/linux/qic117.h (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 862e483cce8..8c634f9df39 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -129,7 +129,6 @@ header-y += posix_types.h header-y += ppdev.h header-y += prctl.h header-y += ps2esdi.h -header-y += qic117.h header-y += qnxtypes.h header-y += quotaio_v1.h header-y += quotaio_v2.h diff --git a/include/linux/mtio.h b/include/linux/mtio.h index 8c66151821e..6f8d2d45a8f 100644 --- a/include/linux/mtio.h +++ b/include/linux/mtio.h @@ -10,7 +10,6 @@ #include #include -#include /* * Structures and definitions for mag tape io control commands @@ -116,32 +115,6 @@ struct mtget { #define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ #define MT_ISFTAPE_FLAG 0x800000 -struct mt_tape_info { - long t_type; /* device type id (mt_type) */ - char *t_name; /* descriptive name */ -}; - -#define MT_TAPE_INFO { \ - {MT_ISUNKNOWN, "Unknown type of tape device"}, \ - {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \ - {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \ - {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \ - {MT_ISCMSJ500, "CMS Jumbo 500"}, \ - {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \ - {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \ - {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \ - {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \ - {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \ - {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \ - {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \ - {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \ - {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \ - {MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \ - {MT_ISSCSI1, "Generic SCSI-1 tape"}, \ - {MT_ISSCSI2, "Generic SCSI-2 tape"}, \ - {0, NULL} \ -} - /* structure for MTIOCPOS - mag tape get position command */ @@ -150,130 +123,11 @@ struct mtpos { }; -/* structure for MTIOCVOLINFO, query information about the volume - * currently positioned at (zftape) - */ -struct mtvolinfo { - unsigned int mt_volno; /* vol-number */ - unsigned int mt_blksz; /* blocksize used when recording */ - unsigned int mt_rawsize; /* raw tape space consumed, in kb */ - unsigned int mt_size; /* volume size after decompression, in kb */ - unsigned int mt_cmpr:1; /* this volume has been compressed */ -}; - -/* raw access to a floppy drive, read and write an arbitrary segment. - * For ftape/zftape to support formatting etc. - */ -#define MT_FT_RD_SINGLE 0 -#define MT_FT_RD_AHEAD 1 -#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */ -#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */ -#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */ -#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */ - -struct mtftseg -{ - unsigned mt_segno; /* the segment to read or write */ - unsigned mt_mode; /* modes for read/write (sync/async etc.) */ - int mt_result; /* result of r/w request, not of the ioctl */ - void __user *mt_data; /* User space buffer: must be 29kb */ -}; - -/* get tape capacity (ftape/zftape) - */ -struct mttapesize { - unsigned long mt_capacity; /* entire, uncompressed capacity - * of a cartridge - */ - unsigned long mt_used; /* what has been used so far, raw - * uncompressed amount - */ -}; - -/* possible values of the ftfmt_op field - */ -#define FTFMT_SET_PARMS 1 /* set software parms */ -#define FTFMT_GET_PARMS 2 /* get software parms */ -#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */ -#define FTFMT_STATUS 4 /* monitor formatting a tape track */ -#define FTFMT_VERIFY 5 /* verify the given segment */ - -struct ftfmtparms { - unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */ - unsigned char ft_fmtcode; /* Refer to the QIC specs */ - unsigned char ft_fhm; /* floppy head max */ - unsigned char ft_ftm; /* floppy track max */ - unsigned short ft_spt; /* segments per track */ - unsigned short ft_tpc; /* tracks per cartridge */ -}; - -struct ftfmttrack { - unsigned int ft_track; /* track to format */ - unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */ -}; - -struct ftfmtstatus { - unsigned int ft_segment; /* segment currently being formatted */ -}; - -struct ftfmtverify { - unsigned int ft_segment; /* segment to verify */ - unsigned long ft_bsm; /* bsm as result of VERIFY cmd */ -}; - -struct mtftformat { - unsigned int fmt_op; /* operation to perform */ - union fmt_arg { - struct ftfmtparms fmt_parms; /* format parameters */ - struct ftfmttrack fmt_track; /* ctrl while formatting */ - struct ftfmtstatus fmt_status; - struct ftfmtverify fmt_verify; /* for verifying */ - } fmt_arg; -}; - -struct mtftcmd { - unsigned int ft_wait_before; /* timeout to wait for drive to get ready - * before command is sent. Milliseconds - */ - qic117_cmd_t ft_cmd; /* command to send */ - unsigned char ft_parm_cnt; /* zero: no parm is sent. */ - unsigned char ft_parms[3]; /* parameter(s) to send to - * the drive. The parms are nibbles - * driver sends cmd + 2 step pulses */ - unsigned int ft_result_bits; /* if non zero, number of bits - * returned by the tape drive - */ - unsigned int ft_result; /* the result returned by the tape drive*/ - unsigned int ft_wait_after; /* timeout to wait for drive to get ready - * after command is sent. 0: don't wait */ - int ft_status; /* status returned by ready wait - * undefined if timeout was 0. - */ - int ft_error; /* error code if error status was set by - * command - */ -}; - /* mag tape io control commands */ #define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ #define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ #define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ -/* The next two are used by the QIC-02 driver for runtime reconfiguration. - * See tpqic02.h for struct mtconfiginfo. - */ -#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */ -#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */ - -/* the next six are used by the floppy ftape drivers and its frontends - * sorry, but MTIOCTOP commands are write only. - */ -#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */ -#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */ -#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */ -#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/ -#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */ -#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */ /* Generic Mag Tape (device independent) status macros for examining * mt_gstat -- HP-UX compatible. diff --git a/include/linux/qic117.h b/include/linux/qic117.h deleted file mode 100644 index 07b537e5d35..00000000000 --- a/include/linux/qic117.h +++ /dev/null @@ -1,290 +0,0 @@ -#ifndef _QIC117_H -#define _QIC117_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:32 $ - * - * This file contains QIC-117 spec. related definitions for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - * - * These data were taken from the Quarter-Inch Cartridge - * Drive Standards, Inc. document titled: - * `Common Command Set Interface Specification for Flexible - * Disk Controller Based Minicartridge Tape Drives' - * document QIC-117 Revision J, 28 Aug 96. - * For more information, contact: - * Quarter-Inch Cartridge Drive Standards, Inc. - * 311 East Carrillo Street - * Santa Barbara, California 93101 - * Telephone (805) 963-3853 - * Fax (805) 962-1541 - * WWW http://www.qic.org - * - * Current QIC standard revisions (of interest) are: - * QIC-40-MC, Rev. M, 2 Sep 92. - * QIC-80-MC, Rev. N, 20 Mar 96. - * QIC-80-MC, Rev. K, 15 Dec 94. - * QIC-113, Rev. G, 15 Jun 95. - * QIC-117, Rev. J, 28 Aug 96. - * QIC-122, Rev. B, 6 Mar 91. - * QIC-130, Rev. C, 2 Sep 92. - * QIC-3010-MC, Rev. F, 14 Jun 95. - * QIC-3020-MC, Rev. G, 31 Aug 95. - * QIC-CRF3, Rev. B, 15 Jun 95. - * */ - -/* - * QIC-117 common command set rev. J. - * These commands are sent to the tape unit - * as number of pulses over the step line. - */ - -typedef enum { - QIC_NO_COMMAND = 0, - QIC_RESET = 1, - QIC_REPORT_NEXT_BIT = 2, - QIC_PAUSE = 3, - QIC_MICRO_STEP_PAUSE = 4, - QIC_ALTERNATE_TIMEOUT = 5, - QIC_REPORT_DRIVE_STATUS = 6, - QIC_REPORT_ERROR_CODE = 7, - QIC_REPORT_DRIVE_CONFIGURATION = 8, - QIC_REPORT_ROM_VERSION = 9, - QIC_LOGICAL_FORWARD = 10, - QIC_PHYSICAL_REVERSE = 11, - QIC_PHYSICAL_FORWARD = 12, - QIC_SEEK_HEAD_TO_TRACK = 13, - QIC_SEEK_LOAD_POINT = 14, - QIC_ENTER_FORMAT_MODE = 15, - QIC_WRITE_REFERENCE_BURST = 16, - QIC_ENTER_VERIFY_MODE = 17, - QIC_STOP_TAPE = 18, -/* commands 19-20: reserved */ - QIC_MICRO_STEP_HEAD_UP = 21, - QIC_MICRO_STEP_HEAD_DOWN = 22, - QIC_SOFT_SELECT = 23, - QIC_SOFT_DESELECT = 24, - QIC_SKIP_REVERSE = 25, - QIC_SKIP_FORWARD = 26, - QIC_SELECT_RATE = 27, -/* command 27, in ccs2: Select Rate or Format */ - QIC_ENTER_DIAGNOSTIC_1 = 28, - QIC_ENTER_DIAGNOSTIC_2 = 29, - QIC_ENTER_PRIMARY_MODE = 30, -/* command 31: vendor unique */ - QIC_REPORT_VENDOR_ID = 32, - QIC_REPORT_TAPE_STATUS = 33, - QIC_SKIP_EXTENDED_REVERSE = 34, - QIC_SKIP_EXTENDED_FORWARD = 35, - QIC_CALIBRATE_TAPE_LENGTH = 36, - QIC_REPORT_FORMAT_SEGMENTS = 37, - QIC_SET_FORMAT_SEGMENTS = 38, -/* commands 39-45: reserved */ - QIC_PHANTOM_SELECT = 46, - QIC_PHANTOM_DESELECT = 47 -} qic117_cmd_t; - -typedef enum { - discretional = 0, required, ccs1, ccs2 -} qic_compatibility; - -typedef enum { - unused, mode, motion, report -} command_types; - -struct qic117_command_table { - char *name; - __u8 mask; - __u8 state; - __u8 cmd_type; - __u8 non_intr; - __u8 level; -}; - -#define QIC117_COMMANDS {\ -/* command mask state cmd_type */\ -/* | name | | | non_intr */\ -/* | | | | | | level */\ -/* 0*/ {NULL, 0x00, 0x00, mode, 0, discretional},\ -/* 1*/ {"soft reset", 0x00, 0x00, motion, 1, required},\ -/* 2*/ {"report next bit", 0x00, 0x00, report, 0, required},\ -/* 3*/ {"pause", 0x36, 0x24, motion, 1, required},\ -/* 4*/ {"micro step pause", 0x36, 0x24, motion, 1, required},\ -/* 5*/ {"alternate command timeout", 0x00, 0x00, mode, 0, required},\ -/* 6*/ {"report drive status", 0x00, 0x00, report, 0, required},\ -/* 7*/ {"report error code", 0x01, 0x01, report, 0, required},\ -/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\ -/* 9*/ {"report rom version", 0x00, 0x00, report, 0, required},\ -/*10*/ {"logical forward", 0x37, 0x25, motion, 0, required},\ -/*11*/ {"physical reverse", 0x17, 0x05, motion, 0, required},\ -/*12*/ {"physical forward", 0x17, 0x05, motion, 0, required},\ -/*13*/ {"seek head to track", 0x37, 0x25, motion, 0, required},\ -/*14*/ {"seek load point", 0x17, 0x05, motion, 1, required},\ -/*15*/ {"enter format mode", 0x1f, 0x05, mode, 0, required},\ -/*16*/ {"write reference burst", 0x1f, 0x05, motion, 1, required},\ -/*17*/ {"enter verify mode", 0x37, 0x25, mode, 0, required},\ -/*18*/ {"stop tape", 0x00, 0x00, motion, 1, required},\ -/*19*/ {"reserved (19)", 0x00, 0x00, unused, 0, discretional},\ -/*20*/ {"reserved (20)", 0x00, 0x00, unused, 0, discretional},\ -/*21*/ {"micro step head up", 0x02, 0x00, motion, 0, required},\ -/*22*/ {"micro step head down", 0x02, 0x00, motion, 0, required},\ -/*23*/ {"soft select", 0x00, 0x00, mode, 0, discretional},\ -/*24*/ {"soft deselect", 0x00, 0x00, mode, 0, discretional},\ -/*25*/ {"skip segments reverse", 0x36, 0x24, motion, 1, required},\ -/*26*/ {"skip segments forward", 0x36, 0x24, motion, 1, required},\ -/*27*/ {"select rate or format", 0x03, 0x01, mode, 0, required /* [ccs2] */},\ -/*28*/ {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional},\ -/*29*/ {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional},\ -/*30*/ {"enter primary mode", 0x00, 0x00, mode, 0, required},\ -/*31*/ {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional},\ -/*32*/ {"report vendor id", 0x00, 0x00, report, 0, required},\ -/*33*/ {"report tape status", 0x04, 0x04, report, 0, ccs1},\ -/*34*/ {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1},\ -/*35*/ {"skip extended forward", 0x36, 0x24, motion, 1, ccs1},\ -/*36*/ {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2},\ -/*37*/ {"report format segments", 0x17, 0x05, report, 0, ccs2},\ -/*38*/ {"set format segments", 0x17, 0x05, mode, 0, ccs2},\ -/*39*/ {"reserved (39)", 0x00, 0x00, unused, 0, discretional},\ -/*40*/ {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional},\ -/*41*/ {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional},\ -/*42*/ {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional},\ -/*43*/ {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional},\ -/*44*/ {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional},\ -/*45*/ {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional},\ -/*46*/ {"phantom select", 0x00, 0x00, mode, 0, discretional},\ -/*47*/ {"phantom deselect", 0x00, 0x00, mode, 0, discretional},\ -} - -/* - * Status bits returned by QIC_REPORT_DRIVE_STATUS - */ - -#define QIC_STATUS_READY 0x01 /* Drive is ready or idle. */ -#define QIC_STATUS_ERROR 0x02 /* Error detected, must read - error code to clear this */ -#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 /* Tape is present */ -#define QIC_STATUS_WRITE_PROTECT 0x08 /* Tape is write protected */ -#define QIC_STATUS_NEW_CARTRIDGE 0x10 /* New cartridge inserted, must - read error status to clear. */ -#define QIC_STATUS_REFERENCED 0x20 /* Cartridge appears to have been - formatted. */ -#define QIC_STATUS_AT_BOT 0x40 /* Cartridge is at physical - beginning of tape. */ -#define QIC_STATUS_AT_EOT 0x80 /* Cartridge is at physical end - of tape. */ -/* - * Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION - */ - -#define QIC_CONFIG_RATE_MASK 0x18 -#define QIC_CONFIG_RATE_SHIFT 3 -#define QIC_CONFIG_RATE_250 0 -#define QIC_CONFIG_RATE_500 2 -#define QIC_CONFIG_RATE_1000 3 -#define QIC_CONFIG_RATE_2000 1 -#define QIC_CONFIG_RATE_4000 0 /* since QIC-117 Rev. J */ - -#define QIC_CONFIG_LONG 0x40 /* Extra Length Tape Detected */ -#define QIC_CONFIG_80 0x80 /* QIC-80 detected. */ - -/* - * Status bits returned by QIC_REPORT_TAPE_STATUS - */ - -#define QIC_TAPE_STD_MASK 0x0f -#define QIC_TAPE_QIC40 0x01 -#define QIC_TAPE_QIC80 0x02 -#define QIC_TAPE_QIC3020 0x03 -#define QIC_TAPE_QIC3010 0x04 - -#define QIC_TAPE_LEN_MASK 0x70 -#define QIC_TAPE_205FT 0x10 -#define QIC_TAPE_307FT 0x20 -#define QIC_TAPE_VARIABLE 0x30 -#define QIC_TAPE_1100FT 0x40 -#define QIC_TAPE_FLEX 0x60 - -#define QIC_TAPE_WIDE 0x80 - -/* Define a value (in feet) slightly higher than - * the possible maximum tape length. - */ -#define QIC_TOP_TAPE_LEN 1500 - -/* - * Errors: List of error codes, and their severity. - */ - -typedef struct { - char *message; /* Text describing the error. */ - unsigned int fatal:1; /* Non-zero if the error is fatal. */ -} ftape_error; - -#define QIC117_ERRORS {\ - /* 0*/ { "No error", 0, },\ - /* 1*/ { "Command Received while Drive Not Ready", 0, },\ - /* 2*/ { "Cartridge Not Present or Removed", 1, },\ - /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\ - /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\ - /* 5*/ { "Cartridge Write Protected", 1, },\ - /* 6*/ { "Undefined or Reserved Command Code", 1, },\ - /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\ - /* 8*/ { "Illegal Command in Report Subcontext", 0, },\ - /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\ - /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\ - /*11*/ { "Warning--Read Gain Setting Error", 1, },\ - /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\ - /*13*/ { "Command Received While New Cartridge Pending", 1, },\ - /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\ - /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\ - /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\ - /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\ - /*18*/ { "Logical EOT Before All Segments generated", 1, },\ - /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\ - /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\ - /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\ - /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\ - /*23*/ { "Motion Time-out Error", 1, },\ - /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\ - /*25*/ { "Transmit Overrun (obs)", 1, },\ - /*26*/ { "Power On Reset Occurred", 0, },\ - /*27*/ { "Software Reset Occurred", 0, },\ - /*28*/ { "Diagnostic Mode 1 Error", 1, },\ - /*29*/ { "Diagnostic Mode 2 Error", 1, },\ - /*30*/ { "Command Received During Non-Interruptible Process", 1, },\ - /*31*/ { "Rate or Format Selection Error", 1, },\ - /*32*/ { "Illegal Command While in High Speed Mode", 1, },\ - /*33*/ { "Illegal Seek Segment Value", 1, },\ - /*34*/ { "Invalid Media", 1, },\ - /*35*/ { "Head Positioning Failure", 1, },\ - /*36*/ { "Write Reference Burst Failure", 1, },\ - /*37*/ { "Prom Code Missing", 1, },\ - /*38*/ { "Invalid Format", 1, },\ - /*39*/ { "EOT/BOT System Failure", 1, },\ - /*40*/ { "Prom A Checksum Error", 1, },\ - /*41*/ { "Drive Wakeup Reset Occurred", 1, },\ - /*42*/ { "Prom B Checksum Error", 1, },\ - /*43*/ { "Illegal Entry into Format Mode", 1, },\ -} - -#endif /* _QIC117_H */ -- cgit v1.2.3 From de14569f94513279e3d44d9571a421e9da1759ae Mon Sep 17 00:00:00 2001 From: Vladimir Saveliev Date: Mon, 22 Jan 2007 20:40:46 -0800 Subject: [PATCH] resierfs: avoid tail packing if an inode was ever mmapped This patch fixes a confusion reiserfs has for a long time. On release file operation reiserfs used to try to pack file data stored in last incomplete page of some files into metadata blocks. After packing the page got cleared with clear_page_dirty. It did not take into account that the page may be mmaped into other process's address space. Recent replacement for clear_page_dirty cancel_dirty_page found the confusion with sanity check that page has to be not mapped. The patch fixes the confusion by making reiserfs avoid tail packing if an inode was ever mmapped. reiserfs_mmap and reiserfs_file_release are serialized with mutex in reiserfs specific inode. reiserfs_mmap locks the mutex and sets a bit in reiserfs specific inode flags. reiserfs_file_release checks the bit having the mutex locked. If bit is set - tail packing is avoided. This eliminates a possibility that mmapped page gets cancel_page_dirty-ed. Signed-off-by: Vladimir Saveliev Cc: Jeff Mahoney Cc: Chris Mason Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/reiserfs_fs_i.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/reiserfs_fs_i.h b/include/linux/reiserfs_fs_i.h index 5b3b297aa2c..ce3663fb010 100644 --- a/include/linux/reiserfs_fs_i.h +++ b/include/linux/reiserfs_fs_i.h @@ -25,6 +25,7 @@ typedef enum { i_link_saved_truncate_mask = 0x0020, i_has_xattr_dir = 0x0040, i_data_log = 0x0080, + i_ever_mapped = 0x0100 } reiserfs_inode_flags; struct reiserfs_inode_info { @@ -52,6 +53,7 @@ struct reiserfs_inode_info { ** flushed */ unsigned long i_trans_id; struct reiserfs_journal_list *i_jl; + struct mutex i_mmap; #ifdef CONFIG_REISERFS_FS_POSIX_ACL struct posix_acl *i_acl_access; struct posix_acl *i_acl_default; -- cgit v1.2.3 From ac8be955049dab828a68b9c68a75144832f8289f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 20 Jan 2007 00:18:01 +0000 Subject: [MIPS] SMTC: Instant IPI replay. SMTC pseudo-interrupts between TCs are deferred and queued if the target TC is interrupt-inhibited (IXMT). In the first SMTC prototypes, these queued IPIs were serviced on return to user mode, or on entry into the kernel idle loop. The INSTANT_REPLAY option dispatches them as part of local_irq_restore() processing, which adds runtime overhead (hence the option to turn it off), but ensures that IPIs are handled promptly even under heavy I/O interrupt load. Signed-off-by: Ralf Baechle --- include/asm-mips/irqflags.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'include') diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h index 46bf5de5ac7..af3b07dfad4 100644 --- a/include/asm-mips/irqflags.h +++ b/include/asm-mips/irqflags.h @@ -15,6 +15,27 @@ #include +/* + * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred IPIs, + * at the cost of branch and call overhead on each local_irq_restore() + */ + +#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY + +extern void smtc_ipi_replay(void); + +#define irq_restore_epilog(flags) \ +do { \ + if (!(flags & 0x0400)) \ + smtc_ipi_replay(); \ +} while (0) + +#else + +#define irq_restore_epilog(ignore) do { } while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + __asm__ ( " .macro raw_local_irq_enable \n" " .set push \n" @@ -193,6 +214,7 @@ do { \ : "=r" (__tmp1) \ : "0" (flags) \ : "memory"); \ + irq_restore_epilog(flags); \ } while(0) static inline int raw_irqs_disabled_flags(unsigned long flags) -- cgit v1.2.3 From 73f66ace34e3d935d1ad01208234f8871ac1f500 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 23 Jan 2007 12:27:04 +0000 Subject: [PATCH] fix prototype of csum_ipv6_magic() (ia64) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/asm-ia64/checksum.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h index 2b78582cbd6..97af155057e 100644 --- a/include/asm-ia64/checksum.h +++ b/include/asm-ia64/checksum.h @@ -72,8 +72,8 @@ static inline __sum16 csum_fold(__wsum csum) #define _HAVE_ARCH_IPV6_CSUM 1 struct in6_addr; -extern unsigned short int csum_ipv6_magic(struct in6_addr *saddr, - struct in6_addr *daddr, __u32 len, unsigned short proto, - unsigned int csum); +extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, __u32 len, unsigned short proto, + __wsum csum); #endif /* _ASM_IA64_CHECKSUM_H */ -- cgit v1.2.3 From 16d807988ffaf9b7cbb1966955aa8f738c32e740 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Mon, 15 Jan 2007 17:17:31 -0800 Subject: [NETFILTER]: fix xt_state compile failure In file included from net/netfilter/xt_state.c:13: include/net/netfilter/nf_conntrack_compat.h: In function 'nf_ct_l3proto_try_module_get': include/net/netfilter/nf_conntrack_compat.h:70: error: 'PF_INET' undeclared (first use in this function) include/net/netfilter/nf_conntrack_compat.h:70: error: (Each undeclared identifier is reported only once include/net/netfilter/nf_conntrack_compat.h:70: error: for each function it appears in.) include/net/netfilter/nf_conntrack_compat.h:71: warning: control reaches end of non-void function make[2]: *** [net/netfilter/xt_state.o] Error 1 make[1]: *** [net/netfilter] Error 2 make: *** [net] Error 2 A simple fix is to have nf_conntrack_compat.h #include . Signed-off-by: Mikael Pettersson Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/netfilter/nf_conntrack_compat.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/netfilter/nf_conntrack_compat.h b/include/net/netfilter/nf_conntrack_compat.h index b9ce5c80d9d..6f84c1f7fcd 100644 --- a/include/net/netfilter/nf_conntrack_compat.h +++ b/include/net/netfilter/nf_conntrack_compat.h @@ -6,6 +6,7 @@ #if defined(CONFIG_IP_NF_CONNTRACK) || defined(CONFIG_IP_NF_CONNTRACK_MODULE) #include +#include #ifdef CONFIG_IP_NF_CONNTRACK_MARK static inline u_int32_t *nf_ct_get_mark(const struct sk_buff *skb, -- cgit v1.2.3 From 610ab73ac4cc8912fc253bbdc6d1f74bad3c8e3a Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Mon, 15 Jan 2007 19:18:30 -0800 Subject: [SCTP]: Correctly handle unexpected INIT-ACK chunk. Consider the chunk as Out-of-the-Blue if we don't have an endpoint. Otherwise discard it as before. Signed-off-by: Vlad Yasevich Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- include/net/sctp/sm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 3269ed1cc22..73cb9943c8a 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -134,6 +134,7 @@ sctp_state_fn_t sctp_sf_violation; sctp_state_fn_t sctp_sf_discard_chunk; sctp_state_fn_t sctp_sf_do_5_2_1_siminit; sctp_state_fn_t sctp_sf_do_5_2_2_dupinit; +sctp_state_fn_t sctp_sf_do_5_2_3_initack; sctp_state_fn_t sctp_sf_do_5_2_4_dupcook; sctp_state_fn_t sctp_sf_unk_chunk; sctp_state_fn_t sctp_sf_do_8_5_1_E_sa; -- cgit v1.2.3 From 2748e5dec7ca8a3804852c7c4171f9156384d15c Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 23 Jan 2007 22:00:13 -0800 Subject: [NETFILTER]: Fix iptables ABI breakage on (at least) CRIS With the introduction of x_tables we accidentally broke compatibility by defining IPT_TABLE_MAXNAMELEN to XT_FUNCTION_MAXNAMELEN instead of XT_TABLE_MAXNAMELEN, which is two bytes larger. On most architectures it doesn't really matter since we don't have any tables with names that long in the kernel and the structure layout didn't change because of alignment requirements of following members. On CRIS however (and other architectures that don't align data) this changed the structure layout and thus broke compatibility with old iptables binaries. Changing it back will break compatibility with binaries compiled against recent kernels again, but since the breakage has only been there for three releases this seems like the better choice. Spotted by Jonas Berlin . Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv4/ip_tables.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index 4f06dad0bde..98d566c5e32 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -28,7 +28,7 @@ #include #define IPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN -#define IPT_TABLE_MAXNAMELEN XT_FUNCTION_MAXNAMELEN +#define IPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN #define ipt_match xt_match #define ipt_target xt_target #define ipt_table xt_table -- cgit v1.2.3 From bf1c1ee88008fd639ebb5c74f0555fd414369bdc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 23 Jan 2007 22:04:35 -0800 Subject: [NET]: Process include/linux/if_{addr,link}.h with unifdef After commit d3dcc077bf88806201093f86325ec656e4dbfbce, include/linux/if_{addr,link}.h should be processed with unifdef. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- include/linux/Kbuild | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 8c634f9df39..157db77a717 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -69,7 +69,6 @@ header-y += hysdn_if.h header-y += i2c-dev.h header-y += i8k.h header-y += icmp.h -header-y += if_addr.h header-y += if_arcnet.h header-y += if_arp.h header-y += if_bonding.h @@ -79,7 +78,6 @@ header-y += if_fddi.h header-y += if.h header-y += if_hippi.h header-y += if_infiniband.h -header-y += if_link.h header-y += if_packet.h header-y += if_plip.h header-y += if_ppp.h @@ -213,6 +211,7 @@ unifdef-y += hpet.h unifdef-y += i2c.h unifdef-y += i2o-dev.h unifdef-y += icmpv6.h +unifdef-y += if_addr.h unifdef-y += if_bridge.h unifdef-y += if_ec.h unifdef-y += if_eql.h @@ -220,6 +219,7 @@ unifdef-y += if_ether.h unifdef-y += if_fddi.h unifdef-y += if_frad.h unifdef-y += if_ltalk.h +unifdef-y += if_link.h unifdef-y += if_pppox.h unifdef-y += if_shaper.h unifdef-y += if_tr.h -- cgit v1.2.3 From 6fd8bb881509c6bdc3469b3ed16ec25a3b7cad0e Mon Sep 17 00:00:00 2001 From: Masahide NAKAMURA Date: Tue, 23 Jan 2007 22:17:23 -0800 Subject: [IP] TUNNEL: Fix to be built with user application. include/linux/if_tunnel.h is broken for user application because it was changed to use __be32 which is required to include linux/types.h in advance but didn't. (This issue is found when building MIPL2 daemon. We are not sure this is the last header to be fixed about __be32.) Signed-off-by: Masahide NAKAMURA Signed-off-by: TAKAMIYA Noriaki Signed-off-by: David S. Miller --- include/linux/if_tunnel.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 8de079ba110..660b5010c2d 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -1,6 +1,8 @@ #ifndef _IF_TUNNEL_H_ #define _IF_TUNNEL_H_ +#include + #define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) #define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) #define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) -- cgit v1.2.3 From 7a801184fa480e11e6431f184a5bdf31f63326fb Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 17 Jan 2007 12:32:12 -0600 Subject: libata: Fixup n_elem initialization Fixup the inialization of qc->n_elem. It currently gets initialized to 1 for commands that do not transfer any data. Fix this by initializing n_elem to 0 and only setting to 1 in ata_scsi_qc_new when there is data to transfer. This fixes some problems seen with SATA devices attached to ipr adapters. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index e53a13ba7f7..65d318746ac 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1149,6 +1149,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->cursect = qc->cursg = qc->cursg_ofs = 0; qc->nsect = 0; qc->nbytes = qc->curbytes = 0; + qc->n_elem = 0; qc->err_mask = 0; ata_tf_init(qc->dev, &qc->tf); -- cgit v1.2.3 From d0f29485686d9d1c4f31240953a742d5dd4fdb72 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 17 Jan 2007 12:32:28 -0600 Subject: libata: Initialize qc->pad_len Initialize qc->pad_len for each new command. This ensures that pad_len is not set to a stale value for zero data length commands. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 65d318746ac..f7f268e3874 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1151,6 +1151,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->nbytes = qc->curbytes = 0; qc->n_elem = 0; qc->err_mask = 0; + qc->pad_len = 0; ata_tf_init(qc->dev, &qc->tf); -- cgit v1.2.3 From 7e60d1b427c51cf2525e5d736a71780978cfb828 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 20 Dec 2006 15:58:52 +1100 Subject: [POWERPC] Move ELF_ET_DYN_BASE up to 512MB point I often test new versions of glibc by doing: LD_LIBRARY_PATH=/XXX/lib /XXX/lib/ld.so.1 One test case ended up SEGV'ing. Upon closer inspection ld.so was loaded at 0x8000000 (128MB) with the heap right after it. Since we normally link binaries at 0x10000000 (256MB) we only had about 128MB of space for the heap: 00100000-00103000 r-xp 00100000 00:00 0 [vdso] 08000000-0801e000 r-xp 00000000 00:01 33079 /lib/ld-2.5.so 0802d000-0802f000 rwxp 0001d000 00:01 33079 /lib/ld-2.5.so 0802f000-08050000 rwxp 0802f000 00:00 0 [heap] 0fe91000-0ffd9000 r-xp 00000000 00:01 33082 /lib/libc-2.5.so 0ffd9000-0ffe8000 ---p 00148000 00:01 33082 /lib/libc-2.5.so 0ffe8000-0ffea000 r--p 00147000 00:01 33082 /lib/libc-2.5.so 0ffea000-0ffed000 rwxp 00149000 00:01 33082 /lib/libc-2.5.so 10000000-10004000 r-xp 00000000 00:01 76 /bin/sleep 10013000-10014000 rwxp 00003000 00:01 76 /bin/sleep ffb41000-ffb56000 rw-p ffb41000 00:00 0 [stack] One way to fix this is move ELF_ET_DYN_BASE from 0x08000000 to 0x20000000. This allows 128MB for the binary (hopefully enough for even the most crazy c++ apps), and with our current layout we will grow the heap up and the stack down, allowing potentially gigabytes of heap: 00100000-00103000 r-xp 00100000 00:00 0 [vdso] 0fe8a000-0ffd3000 r-xp 00000000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffd3000-0ffe3000 ---p 00149000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffe3000-0ffea000 r--p 00149000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffea000-0ffee000 rwxp 00150000 00:01 3350 /lib/tls/libc-2.3.6.so 10000000-10004000 r-xp 00000000 00:01 76 /bin/sleep 10013000-10014000 rwxp 00003000 00:01 76 /bin/sleep 20000000-20018000 r-xp 00000000 00:01 3478 /lib/ld-2.3.6.so 20028000-20029000 r--p 00018000 00:01 3478 /lib/ld-2.3.6.so 20029000-2002a000 rwxp 00019000 00:01 3478 /lib/ld-2.3.6.so 2002a000-2004b000 rwxp 2002a000 00:00 0 [heap] ffd67000-ffd7c000 rw-p ffd67000 00:00 0 [stack] Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- include/asm-powerpc/elf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index d36426c01b6..de507995c7b 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -173,7 +173,7 @@ typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; the loader. We need to make sure that it is out of the way of the program that it will "exec", and that there is sufficient room for the brk. */ -#define ELF_ET_DYN_BASE (0x08000000) +#define ELF_ET_DYN_BASE (0x20000000) /* Common routine for both 32-bit and 64-bit processes */ static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, -- cgit v1.2.3 From c53653130f2868e44c6e8346d110d27d39e7d07b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 14 Jan 2007 10:15:00 +0100 Subject: [POWERPC] Remove the broken Gemini support Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras --- include/asm-ppc/m48t35.h | 77 ------------------------------------------------ include/asm-ppc/serial.h | 2 -- 2 files changed, 79 deletions(-) delete mode 100644 include/asm-ppc/m48t35.h (limited to 'include') diff --git a/include/asm-ppc/m48t35.h b/include/asm-ppc/m48t35.h deleted file mode 100644 index a5277ea4b19..00000000000 --- a/include/asm-ppc/m48t35.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip - * and - * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip - * The 37 is the 35 plus alarm and century thus the offsets - * are shifted by the extra registers. - */ - -#ifndef __PPC_M48T35_H -#define __PPC_M48T35_H - -/* RTC offsets */ -#define M48T35_RTC_FLAGS (-8) /* the negative regs are really T37 only */ -#define M48T35_RTC_CENTURY (-7) -#define M48T35_RTC_AL_SEC (-6) -#define M48T35_RTC_AL_MIN (-5) -#define M48T35_RTC_AL_HRS (-4) -#define M48T35_RTC_AL_DOM (-3) -#define M48T35_RTC_INTERRUPT (-2) -#define M48T35_RTC_WATCHDOG (-1) -#define M48T35_RTC_CONTROL 0 /* T35 starts here */ -#define M48T35_RTC_SECONDS 1 -#define M48T35_RTC_MINUTES 2 -#define M48T35_RTC_HOURS 3 -#define M48T35_RTC_DAY 4 -#define M48T35_RTC_DOM 5 -#define M48T35_RTC_MONTH 6 -#define M48T35_RTC_YEAR 7 - -/* this way help us know which bits go with which regs */ -#define M48T35_RTC_FLAGS_BL 0x10 -#define M48T35_RTC_FLAGS_AF 0x40 -#define M48T35_RTC_FLAGS_WDF 0x80 - -#define M48T35_RTC_INTERRUPT_AFE 0x80 -#define M48T35_RTC_INTERRUPT_ABE 0x20 -#define M48T35_RTC_INTERRUPT_ALL (M48T35_RTC_INTERRUPT_AFE|M48T35_RTC_INTERRUPT_ABE) - -#define M48T35_RTC_WATCHDOG_RB 0x03 -#define M48T35_RTC_WATCHDOG_BMB 0x7c -#define M48T35_RTC_WATCHDOG_WDS 0x80 -#define M48T35_RTC_WATCHDOG_ALL (M48T35_RTC_WATCHDOG_RB|M48T35_RTC_WATCHDOG_BMB|M48T35_RTC_W) - -#define M48T35_RTC_CONTROL_WRITE 0x80 -#define M48T35_RTC_CONTROL_READ 0x40 -#define M48T35_RTC_CONTROL_CAL_SIGN 0x20 -#define M48T35_RTC_CONTROL_CAL_VALUE 0x1f -#define M48T35_RTC_CONTROL_LOCKED (M48T35_RTC_WRITE|M48T35_RTC_READ) -#define M48T35_RTC_CONTROL_CALIBRATION (M48T35_RTC_CONTROL_CAL_SIGN|M48T35_RTC_CONTROL_CAL_VALUE) - -#define M48T35_RTC_SECONDS_SEC_1 0x0f -#define M48T35_RTC_SECONDS_SEC_10 0x70 -#define M48T35_RTC_SECONDS_ST 0x80 -#define M48T35_RTC_SECONDS_SEC_ALL (M48T35_RTC_SECONDS_SEC_1|M48T35_RTC_SECONDS_SEC_10) - -#define M48T35_RTC_MINUTES_MIN_1 0x0f -#define M48T35_RTC_MINUTES_MIN_10 0x70 -#define M48T35_RTC_MINUTES_MIN_ALL (M48T35_RTC_MINUTES_MIN_1|M48T35_RTC_MINUTES_MIN_10) - -#define M48T35_RTC_HOURS_HRS_1 0x0f -#define M48T35_RTC_HOURS_HRS_10 0x30 -#define M48T35_RTC_HOURS_HRS_ALL (M48T35_RTC_HOURS_HRS_1|M48T35_RTC_HOURS_HRS_10) - -#define M48T35_RTC_DAY_DAY_1 0x03 -#define M48T35_RTC_DAY_FT 0x40 - -#define M48T35_RTC_ALARM_OFF 0x00 -#define M48T35_RTC_WATCHDOG_OFF 0x00 - - -/* legacy */ -#define M48T35_RTC_SET 0x80 -#define M48T35_RTC_STOPPED 0x80 -#define M48T35_RTC_READ 0x40 - - -#endif diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h index 8a59f8871f3..8fc1b546613 100644 --- a/include/asm-ppc/serial.h +++ b/include/asm-ppc/serial.h @@ -11,8 +11,6 @@ #include #elif defined(CONFIG_CHESTNUT) #include -#elif defined(CONFIG_GEMINI) -#include #elif defined(CONFIG_POWERPMC250) #include #elif defined(CONFIG_LOPEC) -- cgit v1.2.3 From 5b7c726ff0e8c03bc19bf0d5114d3598efa2fbf2 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 09:57:37 +0900 Subject: [POWERPC] Add a field for each specific bus to struct pci_controller Struct pci_controller doesn't prepare for the dependent data of each specific bus. This patch adds private member to struct pci_controller. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/pci-bridge.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index cb02c9d1ef9..d9bf5aba96c 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -53,6 +53,8 @@ struct pci_controller { unsigned long buid; unsigned long dma_window_base_cur; unsigned long dma_window_size; + + void *private_data; }; /* -- cgit v1.2.3 From acc900ef5b6400747e3bafe0017e725b2ba641b8 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 09:58:39 +0900 Subject: [POWERPC] Add IRQ remapping hook This patch adds irq remapping hook. On interrupt mechanism on Beat, when an irq outlet which has an id which is formerly used is created, remapping the irq is required. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/irq.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 46476e9a494..4734cc178db 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -89,6 +89,9 @@ struct irq_host_ops { /* Dispose of such a mapping */ void (*unmap)(struct irq_host *h, unsigned int virq); + /* Update of such a mapping */ + void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); + /* Translate device-tree interrupt specifier from raw format coming * from the firmware to a irq_hw_number_t (interrupt line number) and * type (sense) that can be passed to set_irq_type(). In the absence -- cgit v1.2.3 From 410f4eae4b33631ace70d84470218f3db302afac Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 9 Jan 2007 08:51:43 +0100 Subject: [ARM] 4085/1: AT91: Header fixes. Fix two typo's where AT01_* was used instead of AT91_*. [Patch from Wojtek Kaniewski] Fix definition of AT91_SMC_EXNWMODE for the SAM9 processors. [Patch from Wu Xuan] Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/at91_rstc.h | 2 +- include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h | 2 +- include/asm-arm/arch-at91rm9200/at91sam926x_mc.h | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h index ccdc52da973..237d3c40b31 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rstc.h +++ b/include/asm-arm/arch-at91rm9200/at91_rstc.h @@ -17,7 +17,7 @@ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT01_RSTC_KEY (0xff << 24) /* KEY Password */ +#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */ #define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h index 270a5dcdf1c..ab25f9e94d6 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h +++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h @@ -15,7 +15,7 @@ #define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT01_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ #define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h index 7d94968b5d5..8ac797e39a1 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h +++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h @@ -110,10 +110,10 @@ #define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ #define AT91_SMC_READMODE (1 << 0) /* Read Mode */ #define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 5) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 5) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 5) -#define AT91_SMC_EXNWMODE_READY (3 << 5) +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) #define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ #define AT91_SMC_BAT_SELECT (0 << 8) #define AT91_SMC_BAT_WRITE (1 << 8) -- cgit v1.2.3 From a14d527306dc7dbc38e4607c3cc3a50a600fc98b Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 9 Jan 2007 09:03:42 +0100 Subject: [ARM] 4086/1: AT91: Whitespace cleanup A couple of whitespace cleanups, mainly in the AT91 header files. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/at91_ecc.h | 8 ++++---- include/asm-arm/arch-at91rm9200/at91_pmc.h | 2 +- include/asm-arm/arch-at91rm9200/at91_rtc.h | 16 ++++++++-------- include/asm-arm/arch-at91rm9200/at91rm9200.h | 2 +- include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h | 2 +- include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h | 4 ++-- include/asm-arm/arch-at91rm9200/at91sam926x_mc.h | 8 ++++---- 7 files changed, 21 insertions(+), 21 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h index fddf256a98d..5c564ede5c5 100644 --- a/include/asm-arm/arch-at91rm9200/at91_ecc.h +++ b/include/asm-arm/arch-at91rm9200/at91_ecc.h @@ -14,7 +14,7 @@ #define AT91_ECC_H #define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ -#define AT91_ECC_RST (1 << 0) /* Reset parity */ +#define AT91_ECC_RST (1 << 0) /* Reset parity */ #define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ @@ -23,16 +23,16 @@ #define AT91_ECC_PAGESIZE_2112 (2) #define AT91_ECC_PAGESIZE_4224 (3) -#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ +#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ -#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ +#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ -#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ +#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ #endif diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h index de8c3da74a0..c3b489d09b6 100644 --- a/include/asm-arm/arch-at91rm9200/at91_pmc.h +++ b/include/asm-arm/arch-at91rm9200/at91_pmc.h @@ -61,7 +61,7 @@ #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_1 (0 << 2) #define AT91_PMC_PRES_2 (1 << 2) #define AT91_PMC_PRES_4 (2 << 2) #define AT91_PMC_PRES_8 (3 << 2) diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h index 6e5065d5626..095fe088310 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rtc.h +++ b/include/asm-arm/arch-at91rm9200/at91_rtc.h @@ -21,21 +21,21 @@ #define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ #define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ #define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) +#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) +#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) +#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) #define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) +#define AT91_RTC_CALEVSEL_WEEK (0 << 16) +#define AT91_RTC_CALEVSEL_MONTH (1 << 16) +#define AT91_RTC_CALEVSEL_YEAR (2 << 16) #define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ +#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ #define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ #define AT91_RTC_SEC (0x7f << 0) /* Current Second */ #define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ +#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ #define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ #define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h index 4d51177efdd..c569b6a21a4 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -274,7 +274,7 @@ #define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */ #define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */ #define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */ -#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ +#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ #define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */ #define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */ #define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h index 746d973705b..78f6b4917b8 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h +++ b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h @@ -58,7 +58,7 @@ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) #define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h index ab25f9e94d6..ec88efabbe6 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h +++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h @@ -43,8 +43,8 @@ #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) #define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ #define AT91_MATRIX_CS3A_SMC (0 << 3) #define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h index 8ac797e39a1..972e7531c7f 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h +++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h @@ -33,14 +33,14 @@ #define AT91_SDRAMC_NC_9 (1 << 0) #define AT91_SDRAMC_NC_10 (2 << 0) #define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ #define AT91_SDRAMC_NR_11 (0 << 2) #define AT91_SDRAMC_NR_12 (1 << 2) #define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ #define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ #define AT91_SDRAMC_CAS_1 (1 << 5) #define AT91_SDRAMC_CAS_2 (2 << 5) #define AT91_SDRAMC_CAS_3 (3 << 5) -- cgit v1.2.3 From 6c3c5bb3c68b932ece9f92b9d201196d537cb99c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 16 Jan 2007 12:33:35 +0100 Subject: [ARM] 4095/1: S3C24XX: Fix GPIO set for Bank A GPIO bank A can only be output or a special function, and the regs-gpio.h header has mistakenly got this as input or output. The mistake is carried on into the gpio.c s3c2410_gpio_cfgpin() call which will set the wrong value if S3C2410_GPIO_OUTPUT is passed. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-gpio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index b2893e32a23..eae91694edc 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -52,10 +52,10 @@ /* general configuration options */ #define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -#define S3C2410_GPIO_INPUT (0xFFFFFFF0) +#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ #define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) #define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ -#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */ +#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ #define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ /* register address for the GPIO registers. -- cgit v1.2.3 From 7baced8a5923ce13d3d42d50a042a869092ab4e5 Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Wed, 24 Jan 2007 01:30:37 +0100 Subject: [ARM] 4106/1: S3C2410: typo fixes in register definitions The Trcd* bits of the S3C24xx BANKCON6 and BANKCON7 registers are misspelled in include/asm-arm/arch-s3c2410/regs-mem.h as Trdc*. Signed-off-by: Matt Reimer Acked-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-mem.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h index 375dca50364..e4d82341f7b 100644 --- a/include/asm-arm/arch-s3c2410/regs-mem.h +++ b/include/asm-arm/arch-s3c2410/regs-mem.h @@ -133,10 +133,10 @@ #define S3C2410_BANKCON_SDRAM (0x3 << 15) /* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trdc1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trdc2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trdc3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trdc4 (0x03 << 4) +#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) +#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) +#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) +#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) /* CAS pulse width */ #define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) @@ -153,9 +153,9 @@ #define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) /* next bits only for SDRAM in 6,7 */ -#define S3C2410_BANKCON_Trdc2 (0x00 << 2) -#define S3C2410_BANKCON_Trdc3 (0x01 << 2) -#define S3C2410_BANKCON_Trdc4 (0x02 << 2) +#define S3C2410_BANKCON_Trcd2 (0x00 << 2) +#define S3C2410_BANKCON_Trcd3 (0x01 << 2) +#define S3C2410_BANKCON_Trcd4 (0x02 << 2) /* control column address select */ #define S3C2410_BANKCON_SCANb8 (0x00 << 0) -- cgit v1.2.3 From 89c07fd14fe857c223b042a857a08c3ea46b92eb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 24 Jan 2007 12:31:47 +0000 Subject: [MIPS] Fix APM build Definitions for TIF_FREEZE and _TIF_FREEZE were missing. Signed-off-by: Ralf Baechle --- include/asm-mips/thread_info.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h index e475c45ea26..fbcda820447 100644 --- a/include/asm-mips/thread_info.h +++ b/include/asm-mips/thread_info.h @@ -118,6 +118,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 +#define TIF_FREEZE 19 #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ #define _TIF_SYSCALL_TRACE (1< Date: Wed, 24 Jan 2007 22:22:06 +0900 Subject: [MIPS] vr41xx: need one more nop with mtc0_tlbw_hazard() NEC VR4111 and VR4121 need one more nop with mtc0_tlbw_hazard(). Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- include/asm-mips/hazards.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h index 0fe02945feb..50073157a61 100644 --- a/include/asm-mips/hazards.h +++ b/include/asm-mips/hazards.h @@ -157,7 +157,7 @@ ASMMACRO(back_to_back_c0_hazard, * processors. */ ASMMACRO(mtc0_tlbw_hazard, - nop + nop; nop ) ASMMACRO(tlbw_use_hazard, nop; nop; nop -- cgit v1.2.3 From 66218da212bf141532d678a699f5789c78145ab1 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 24 Jan 2007 15:43:34 +0900 Subject: [MIPS] Fix wrong checksum calculation on 64-bit MIPS The commit 8e3d8433d8c22ca6c42cba4a67d300c39aae7822 ([NET]: MIPS checksum annotations and cleanups) broke 64-bit MIPS. The problem is the commit replaces some unsigned long with __be32. On 64bit MIPS, a __be32 (i.e. unsigned int) value is represented as a sign-extented 32-bit value in a 64-bit argument register. So the address 192.168.0.1 (0xc0a80001) is passed as 0xffffffffc0a80001 to csum_tcpudp_nofold() but the asm code in the function expects 0x00000000c0a80001, therefore it returns a wrong checksum. Explicit cast to unsigned long is needed to drop high 32bit. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/checksum.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h index 24cdcc6eaab..20a81e1548f 100644 --- a/include/asm-mips/checksum.h +++ b/include/asm-mips/checksum.h @@ -159,7 +159,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, #endif " .set pop" : "=r" (sum) - : "0" (daddr), "r"(saddr), + : "0" ((__force unsigned long)daddr), + "r" ((__force unsigned long)saddr), #ifdef __MIPSEL__ "r" ((proto + len) << 8), #else -- cgit v1.2.3 From bde8f00ce64d9824a4f227c8594e335a1a10d044 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 24 Jan 2007 11:54:53 -0800 Subject: [PATCH] NFS: Fix Oops in rpc_call_sync() Fix the Oops in http://bugzilla.linux-nfs.org/show_bug.cgi?id=138 We shouldn't be calling rpc_release_task() for tasks that are not active. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- include/linux/sunrpc/sched.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index 97c76165258..8b6ce60ea05 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -250,7 +250,6 @@ void rpc_init_task(struct rpc_task *task, struct rpc_clnt *clnt, int flags, const struct rpc_call_ops *ops, void *data); void rpc_put_task(struct rpc_task *); -void rpc_release_task(struct rpc_task *); void rpc_exit_task(struct rpc_task *); void rpc_release_calldata(const struct rpc_call_ops *, void *); void rpc_killall_tasks(struct rpc_clnt *); -- cgit v1.2.3 From 717d44e849219781ced028a40fcc59d3e1f49e4c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 24 Jan 2007 11:54:55 -0800 Subject: [PATCH] NFS: Fix races in nfs_revalidate_mapping() Prevent the call to invalidate_inode_pages2() from racing with file writes by taking the inode->i_mutex across the page cache flush and invalidate. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- include/linux/nfs_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 04963063e62..c5d4084773e 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -308,6 +308,7 @@ extern int nfs_attribute_timeout(struct inode *inode); extern int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode); extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *); extern int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping); +extern int nfs_revalidate_mapping_nolock(struct inode *inode, struct address_space *mapping); extern int nfs_setattr(struct dentry *, struct iattr *); extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr); extern void nfs_begin_attr_update(struct inode *); -- cgit v1.2.3 From b229a7b0aed808f2ef6a5e9dbf78b0f17cefb4d0 Mon Sep 17 00:00:00 2001 From: Alan Date: Wed, 24 Jan 2007 11:47:07 +0000 Subject: libata: set_mode, Fix the FIXME When set_mode() changed ->set_mode didn't adapt. This makes the needed changes and removes the relevant FIXME case. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index f7f268e3874..df76fc46781 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -612,11 +612,11 @@ struct ata_port_operations { void (*dev_select)(struct ata_port *ap, unsigned int device); void (*phy_reset) (struct ata_port *ap); /* obsolete */ - void (*set_mode) (struct ata_port *ap); + int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev); void (*post_set_mode) (struct ata_port *ap); - int (*check_atapi_dma) (struct ata_queued_cmd *qc); + int (*check_atapi_dma) (struct ata_queued_cmd *qc); void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); -- cgit v1.2.3 From c6428464894889e110418928e6b37dc2eb4cee56 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 24 Jan 2007 18:47:08 +0100 Subject: [ARM] 4111/1: Allow VFP to work with thread migration on SMP The current lazy saving of the VFP registers is no longer possible with thread migration on SMP. This patch implements a per-CPU vfp-state pointer and the saving of the VFP registers at every context switch. The registers restoring is still performed in a lazy way. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- include/asm-arm/fpstate.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h index 6af4e6bd129..f31cda5a55e 100644 --- a/include/asm-arm/fpstate.h +++ b/include/asm-arm/fpstate.h @@ -35,6 +35,9 @@ struct vfp_hard_struct { */ __u32 fpinst; __u32 fpinst2; +#ifdef CONFIG_SMP + __u32 cpu; +#endif }; union vfp_state { -- cgit v1.2.3 From b2a8bbe67d73631c71492fd60b757fc50a87f182 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 25 Jan 2007 19:40:05 +0900 Subject: libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uli Some uli controllers have stuck SIMPLEX bit which can't be cleared with ata_pci_clear_simplex(), but the controller is capable of doing DMAs on both channels simultaneously. Implement ATA_FLAG_IGN_SIMPLEX which makes libata ignore the simplex bit and use it in sata_uli. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index df76fc46781..22aa69e2090 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -177,6 +177,7 @@ enum { * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */ + ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be -- cgit v1.2.3 From 5ad0d383ddbf0d2fce43b8aac267a6c299fd2dff Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 25 Jan 2007 17:19:51 -0800 Subject: [PATCH] x86_64: fix put_user for 64-bit constant On x86-64, a put_user call using a 64-bit pointer and a constant value that is > 0xffffffff will produce code that doesn't assemble. This patch fixes the asm construct to use the Z constraint for 32-bit constants. Signed-off-by: Roland McGrath Signed-off-by: Linus Torvalds --- include/asm-x86_64/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-x86_64/uaccess.h b/include/asm-x86_64/uaccess.h index d5dbc87274f..c0eac519840 100644 --- a/include/asm-x86_64/uaccess.h +++ b/include/asm-x86_64/uaccess.h @@ -157,7 +157,7 @@ do { \ case 1: __put_user_asm(x,ptr,retval,"b","b","iq",-EFAULT); break;\ case 2: __put_user_asm(x,ptr,retval,"w","w","ir",-EFAULT); break;\ case 4: __put_user_asm(x,ptr,retval,"l","k","ir",-EFAULT); break;\ - case 8: __put_user_asm(x,ptr,retval,"q","","ir",-EFAULT); break;\ + case 8: __put_user_asm(x,ptr,retval,"q","","Zr",-EFAULT); break;\ default: __put_user_bad(); \ } \ } while (0) -- cgit v1.2.3 From 126186a055d965d5a7b1ab560e343ef70694f349 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 26 Jan 2007 01:45:32 -0600 Subject: [POWERPC] 83xx: Return a point to the struct ipic from ipic_init() It's useful to have access to struct ipic handle that just got created in ipic_init(). For example, if we want to setup an external IRQ with out a device node we need access ipic->irqhost to create the virtual to HW IRQ mapping and to set the IRQ sense. With this we can mimic the old sense array concept that existed in arch/ppc. Signed-off-by: Kumar Gala --- include/asm-powerpc/ipic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h index 9fbb0341586..edec79dcb7c 100644 --- a/include/asm-powerpc/ipic.h +++ b/include/asm-powerpc/ipic.h @@ -78,7 +78,7 @@ extern u32 ipic_get_mcp_status(void); extern void ipic_clear_mcp_status(u32 mask); #ifdef CONFIG_PPC_MERGE -extern void ipic_init(struct device_node *node, unsigned int flags); +extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); extern unsigned int ipic_get_irq(void); #else extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, -- cgit v1.2.3 From e89862f4c5b3c4ac9afcd8cb1365d2f1e16ddc3b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 26 Jan 2007 01:04:55 -0800 Subject: [TCP]: Restore SKB socket owner setting in tcp_transmit_skb(). Revert 931731123a103cfb3f70ac4b7abfc71d94ba1f03 We can't elide the skb_set_owner_w() here because things like certain netfilter targets (such as owner MATCH) need a socket to be set on the SKB for correct operation. Thanks to Jan Engelhardt and other netfilter list members for pointing this out. Signed-off-by: David S. Miller --- include/net/inet6_connection_sock.h | 2 +- include/net/inet_connection_sock.h | 3 +-- include/net/ip.h | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/net/inet6_connection_sock.h b/include/net/inet6_connection_sock.h index 16aa96a6a53..f13ddc2543b 100644 --- a/include/net/inet6_connection_sock.h +++ b/include/net/inet6_connection_sock.h @@ -38,5 +38,5 @@ extern void inet6_csk_reqsk_queue_hash_add(struct sock *sk, extern void inet6_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr); -extern int inet6_csk_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok); +extern int inet6_csk_xmit(struct sk_buff *skb, int ipfragok); #endif /* _INET6_CONNECTION_SOCK_H */ diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index bf16d98d372..133cf30d2d7 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -37,8 +37,7 @@ struct tcp_congestion_ops; * (i.e. things that depend on the address family) */ struct inet_connection_sock_af_ops { - int (*queue_xmit)(struct sk_buff *skb, struct sock *sk, - int ipfragok); + int (*queue_xmit)(struct sk_buff *skb, int ipfragok); void (*send_check)(struct sock *sk, int len, struct sk_buff *skb); int (*rebuild_header)(struct sock *sk); diff --git a/include/net/ip.h b/include/net/ip.h index 053f02b5cb8..e79c3e3aa4f 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -97,7 +97,7 @@ extern int ip_mc_output(struct sk_buff *skb); extern int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)); extern int ip_do_nat(struct sk_buff *skb); extern void ip_send_check(struct iphdr *ip); -extern int ip_queue_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok); +extern int ip_queue_xmit(struct sk_buff *skb, int ipfragok); extern void ip_init(void); extern int ip_append_data(struct sock *sk, int getfrag(void *from, char *to, int offset, int len, -- cgit v1.2.3 From 46fe4ddd9dbb15305ab9b458e6cfa4dd47ac3e47 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 26 Jan 2007 00:56:42 -0800 Subject: [PATCH] KVM: SVM: Propagate cpu shutdown events to userspace This patch implements forwarding of SHUTDOWN intercepts from the guest on to userspace on AMD SVM. A SHUTDOWN event occurs when the guest produces a triple fault (e.g. on reboot). This also fixes the bug that a guest reboot actually causes a host reboot under some circumstances. Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kvm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index bc8b4616bad..1be148f0fce 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -46,6 +46,7 @@ enum kvm_exit_reason { KVM_EXIT_HLT = 5, KVM_EXIT_MMIO = 6, KVM_EXIT_IRQ_WINDOW_OPEN = 7, + KVM_EXIT_SHUTDOWN = 8, }; /* for KVM_RUN */ -- cgit v1.2.3 From a1f3bb9ae4497a2ed3eac773fd7798ac33a0371f Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:46 -0800 Subject: [PATCH] Fix CONFIG_COMPAT_VDSO I wouldn't mind if CONFIG_COMPAT_VDSO went away entirely. But if it's there, it should work properly. Currently it's quite haphazard: both real vma and fixmap are mapped, both are put in the two different AT_* slots, sysenter returns to the vma address rather than the fixmap address, and core dumps yet are another story. This patch makes CONFIG_COMPAT_VDSO disable the real vma and use the fixmap area consistently. This makes it actually compatible with what the old vdso implementation did. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/elf.h | 7 +++---- include/asm-i386/fixmap.h | 2 ++ include/asm-i386/page.h | 2 ++ 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h index 45d21a0c95b..0515d61d541 100644 --- a/include/asm-i386/elf.h +++ b/include/asm-i386/elf.h @@ -143,11 +143,8 @@ extern int dump_task_extended_fpu (struct task_struct *, struct user_fxsr_struct # define VDSO_PRELINK 0 #endif -#define VDSO_COMPAT_SYM(x) \ - (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK) - #define VDSO_SYM(x) \ - (VDSO_BASE + (unsigned long)(x) - VDSO_PRELINK) + (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK) #define VDSO_HIGH_EHDR ((const struct elfhdr *) VDSO_HIGH_BASE) #define VDSO_EHDR ((const struct elfhdr *) VDSO_COMPAT_BASE) @@ -156,10 +153,12 @@ extern void __kernel_vsyscall; #define VDSO_ENTRY VDSO_SYM(&__kernel_vsyscall) +#ifndef CONFIG_COMPAT_VDSO #define ARCH_HAS_SETUP_ADDITIONAL_PAGES struct linux_binprm; extern int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack); +#endif extern unsigned int vdso_enabled; diff --git a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h index 02428cb3662..3e9f610c35d 100644 --- a/include/asm-i386/fixmap.h +++ b/include/asm-i386/fixmap.h @@ -23,6 +23,8 @@ extern unsigned long __FIXADDR_TOP; #else #define __FIXADDR_TOP 0xfffff000 +#define FIXADDR_USER_START __fix_to_virt(FIX_VDSO) +#define FIXADDR_USER_END __fix_to_virt(FIX_VDSO - 1) #endif #ifndef __ASSEMBLY__ diff --git a/include/asm-i386/page.h b/include/asm-i386/page.h index fd3f64ace24..7b19f454761 100644 --- a/include/asm-i386/page.h +++ b/include/asm-i386/page.h @@ -143,7 +143,9 @@ extern int page_is_ram(unsigned long pagenr); #include #include +#ifndef CONFIG_COMPAT_VDSO #define __HAVE_ARCH_GATE_AREA 1 +#endif #endif /* __KERNEL__ */ #endif /* _I386_PAGE_H */ -- cgit v1.2.3 From e5b97dde514f9bd43f9e525451d0a863c4fc8a9a Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:48 -0800 Subject: [PATCH] Add VM_ALWAYSDUMP This patch adds the VM_ALWAYSDUMP flag for vm_flags in vm_area_struct. This provides a clean explicit way to have a vma always included in core dumps, as is needed for vDSO's. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mm.h b/include/linux/mm.h index 76912231af4..2d2c08d5f47 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -168,6 +168,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */ #define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */ #define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it */ +#define VM_ALWAYSDUMP 0x04000000 /* Always include in core dumps */ #ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */ #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS -- cgit v1.2.3 From f47aef55d9a18945fcdd7fd6bf01121ce973b91b Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:49 -0800 Subject: [PATCH] i386 vDSO: use VM_ALWAYSDUMP This patch fixes core dumps to include the vDSO vma, which is left out now. It removes the special-case core writing macros, which were not doing the right thing for the vDSO vma anyway. Instead, it uses VM_ALWAYSDUMP in the vma; there is no need for the fixmap page to be installed. It handles the CONFIG_COMPAT_VDSO case by making elf_core_dump use the fake vma from get_gate_vma after real vmas in the same way the /proc/PID/maps code does. This changes core dumps so they no longer include the non-PT_LOAD phdrs from the vDSO. I made the change to add them in the first place, but in turned out that nothing ever wanted them there since the advent of NT_AUXV. It's cleaner to leave them out, and just let the phdrs inside the vDSO image speak for themselves. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/elf.h | 44 -------------------------------------------- 1 file changed, 44 deletions(-) (limited to 'include') diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h index 0515d61d541..369035dfe4b 100644 --- a/include/asm-i386/elf.h +++ b/include/asm-i386/elf.h @@ -168,50 +168,6 @@ do if (vdso_enabled) { \ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_COMPAT_BASE); \ } while (0) -/* - * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out - * extra segments containing the vsyscall DSO contents. Dumping its - * contents makes post-mortem fully interpretable later without matching up - * the same kernel and hardware config to see what PC values meant. - * Dumping its extra ELF program headers includes all the other information - * a debugger needs to easily find how the vsyscall DSO was being used. - */ -#define ELF_CORE_EXTRA_PHDRS (VDSO_HIGH_EHDR->e_phnum) -#define ELF_CORE_WRITE_EXTRA_PHDRS \ -do { \ - const struct elf_phdr *const vsyscall_phdrs = \ - (const struct elf_phdr *) (VDSO_HIGH_BASE \ - + VDSO_HIGH_EHDR->e_phoff); \ - int i; \ - Elf32_Off ofs = 0; \ - for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \ - struct elf_phdr phdr = vsyscall_phdrs[i]; \ - if (phdr.p_type == PT_LOAD) { \ - BUG_ON(ofs != 0); \ - ofs = phdr.p_offset = offset; \ - phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \ - phdr.p_filesz = phdr.p_memsz; \ - offset += phdr.p_filesz; \ - } \ - else \ - phdr.p_offset += ofs; \ - phdr.p_paddr = 0; /* match other core phdrs */ \ - DUMP_WRITE(&phdr, sizeof(phdr)); \ - } \ -} while (0) -#define ELF_CORE_WRITE_EXTRA_DATA \ -do { \ - const struct elf_phdr *const vsyscall_phdrs = \ - (const struct elf_phdr *) (VDSO_HIGH_BASE \ - + VDSO_HIGH_EHDR->e_phoff); \ - int i; \ - for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \ - if (vsyscall_phdrs[i].p_type == PT_LOAD) \ - DUMP_WRITE((void *) vsyscall_phdrs[i].p_vaddr, \ - PAGE_ALIGN(vsyscall_phdrs[i].p_memsz)); \ - } \ -} while (0) - #endif #endif -- cgit v1.2.3 From 250f3915183d377d36e012bac9caa7345ce465b8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 26 Jan 2007 00:56:59 -0800 Subject: [PATCH] knfsd: fix an NFSD bug with full sized, non-page-aligned reads NFSd assumes that largest number of pages that will be needed for a request+response is 2+N where N pages is the size of the largest permitted read/write request. The '2' are 1 for the non-data part of the request, and 1 for the non-data part of the reply. However, when a read request is not page-aligned, and we choose to use ->sendfile to send it directly from the page cache, we may need N+1 pages to hold the whole reply. This can overflow and array and cause an Oops. This patch increases size of the array for holding pages by one and makes sure that entry is NULL when it is not in use. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sunrpc/svc.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 965d6c20086..64f3d60c72a 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -144,8 +144,11 @@ extern u32 svc_max_payload(const struct svc_rqst *rqstp); * * Each request/reply pair can have at most one "payload", plus two pages, * one for the request, and one for the reply. + * We using ->sendfile to return read data, we might need one extra page + * if the request is not page-aligned. So add another '1'. */ -#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE + 2) +#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE \ + + 2 + 1) static inline u32 svc_getnl(struct kvec *iov) { -- cgit v1.2.3 From e2df0c8644db3d01e3c6fc5f7670fdd7b4c2b234 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 26 Jan 2007 00:56:59 -0800 Subject: [PATCH] knfsd: replace some warning ins nfsfh.h with BUG_ON or WARN_ON A couple of the warnings will be followed by an Oops if they ever fire, so may as well be BUG_ON. Another isn't obviously fatal but has never been known to fire, so make it a WARN_ON. Cc: Adrian Bunk Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfsd/nfsfh.h | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index f3b51d62ec7..d9c6c382165 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -217,11 +217,7 @@ void fh_put(struct svc_fh *); static __inline__ struct svc_fh * fh_copy(struct svc_fh *dst, struct svc_fh *src) { - if (src->fh_dentry || src->fh_locked) { - struct dentry *dentry = src->fh_dentry; - printk(KERN_ERR "fh_copy: copying %s/%s, already verified!\n", - dentry->d_parent->d_name.name, dentry->d_name.name); - } + WARN_ON(src->fh_dentry || src->fh_locked); *dst = *src; return dst; @@ -300,10 +296,8 @@ fh_lock_nested(struct svc_fh *fhp, unsigned int subclass) dfprintk(FILEOP, "nfsd: fh_lock(%s) locked = %d\n", SVCFH_fmt(fhp), fhp->fh_locked); - if (!fhp->fh_dentry) { - printk(KERN_ERR "fh_lock: fh not verified!\n"); - return; - } + BUG_ON(!dentry); + if (fhp->fh_locked) { printk(KERN_WARNING "fh_lock: %s/%s already locked!\n", dentry->d_parent->d_name.name, dentry->d_name.name); @@ -328,8 +322,7 @@ fh_lock(struct svc_fh *fhp) static inline void fh_unlock(struct svc_fh *fhp) { - if (!fhp->fh_dentry) - printk(KERN_ERR "fh_unlock: fh not verified!\n"); + BUG_ON(!fhp->fh_dentry); if (fhp->fh_locked) { fill_post_wcc(fhp); -- cgit v1.2.3 From 45f8bde0d0d6deb168b45998c72b4fbeb2f57efb Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Fri, 26 Jan 2007 00:57:09 -0800 Subject: [PATCH] fix various kernel-doc in header files Fix a number of kernel-doc entries for header files in include/linux by making sure they begin with the appropriate '/**' notation and use @var notation. Signed-off-by: Robert P. J. Day Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/bitops.h | 6 ++---- include/linux/list.h | 10 +++++----- include/linux/mutex.h | 2 +- include/linux/rtmutex.h | 4 ++-- include/linux/timer.h | 4 ++-- 5 files changed, 12 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 5d1eabcde5d..638165f571d 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -31,9 +31,8 @@ static inline unsigned long hweight_long(unsigned long w) return sizeof(w) == 4 ? hweight32(w) : hweight64(w); } -/* +/** * rol32 - rotate a 32-bit value left - * * @word: value to rotate * @shift: bits to roll */ @@ -42,9 +41,8 @@ static inline __u32 rol32(__u32 word, unsigned int shift) return (word << shift) | (word >> (32 - shift)); } -/* +/** * ror32 - rotate a 32-bit value right - * * @word: value to rotate * @shift: bits to roll */ diff --git a/include/linux/list.h b/include/linux/list.h index a9c90287c0f..611059d633f 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -227,13 +227,13 @@ static inline void list_replace_init(struct list_head *old, INIT_LIST_HEAD(old); } -/* +/** * list_replace_rcu - replace old entry by new one * @old : the element to be replaced * @new : the new element to insert * - * The old entry will be replaced with the new entry atomically. - * Note: 'old' should not be empty. + * The @old entry will be replaced with the @new entry atomically. + * Note: @old should not be empty. */ static inline void list_replace_rcu(struct list_head *old, struct list_head *new) @@ -680,12 +680,12 @@ static inline void hlist_del_init(struct hlist_node *n) } } -/* +/** * hlist_replace_rcu - replace old entry by new one * @old : the element to be replaced * @new : the new element to insert * - * The old entry will be replaced with the new entry atomically. + * The @old entry will be replaced with the @new entry atomically. */ static inline void hlist_replace_rcu(struct hlist_node *old, struct hlist_node *new) diff --git a/include/linux/mutex.h b/include/linux/mutex.h index a7544afd758..b81bc2adaef 100644 --- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -105,7 +105,7 @@ do { \ extern void __mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key); -/*** +/** * mutex_is_locked - is the mutex locked * @lock: the mutex to be queried * diff --git a/include/linux/rtmutex.h b/include/linux/rtmutex.h index b0090e9f788..382bb795116 100644 --- a/include/linux/rtmutex.h +++ b/include/linux/rtmutex.h @@ -16,7 +16,7 @@ #include #include -/* +/** * The rt_mutex structure * * @wait_lock: spinlock to protect the structure @@ -71,7 +71,7 @@ struct hrtimer_sleeper; #define DEFINE_RT_MUTEX(mutexname) \ struct rt_mutex mutexname = __RT_MUTEX_INITIALIZER(mutexname) -/*** +/** * rt_mutex_is_locked - is the mutex locked * @lock: the mutex to be queried * diff --git a/include/linux/timer.h b/include/linux/timer.h index eeef6643d4c..fb5edaaf0eb 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -41,7 +41,7 @@ static inline void setup_timer(struct timer_list * timer, init_timer(timer); } -/*** +/** * timer_pending - is a timer pending? * @timer: the timer in question * @@ -63,7 +63,7 @@ extern int mod_timer(struct timer_list *timer, unsigned long expires); extern unsigned long next_timer_interrupt(void); -/*** +/** * add_timer - start a timer * @timer: the timer to be added * -- cgit v1.2.3 From a0ad13ef643a5829d63c456ab6143bbda60b44a9 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 26 Jan 2007 00:57:10 -0800 Subject: [PATCH] knfsd: Fix type mismatch with filldir_t used by nfsd nfsd defines a type 'encode_dent_fn' which is much like 'filldir_t' except that the first pointer is 'struct readdir_cd *' rather than 'void *'. It then casts encode_dent_fn points to 'filldir_t' as needed. This hides any other type mismatches between the two such as the fact that the 'ino' arg recently changed from ino_t to u64. So: get rid of 'encode_dent_fn', get rid of the cast of the function type, change the first arg of various functions from 'struct readdir_cd *' to 'void *', and live with the fact that we have a little less type checking on the calling of these functions now. Less internal (to nfsd) checking offset by more external checking, which is more important. Thanks to Gabriel Paubert for discovering this and providing an initial patch. Signed-off-by: Gabriel Paubert Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfsd/nfsd.h | 4 +--- include/linux/nfsd/xdr.h | 4 ++-- include/linux/nfsd/xdr3.h | 8 ++++---- 3 files changed, 7 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 0727774772b..4b7c4b568f6 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -52,8 +52,6 @@ struct readdir_cd { __be32 err; /* 0, nfserr, or nfserr_eof */ }; -typedef int (*encode_dent_fn)(struct readdir_cd *, const char *, - int, loff_t, ino_t, unsigned int); typedef int (*nfsd_dirop_t)(struct inode *, struct dentry *, int, int); extern struct svc_program nfsd_program; @@ -117,7 +115,7 @@ __be32 nfsd_unlink(struct svc_rqst *, struct svc_fh *, int type, int nfsd_truncate(struct svc_rqst *, struct svc_fh *, unsigned long size); __be32 nfsd_readdir(struct svc_rqst *, struct svc_fh *, - loff_t *, struct readdir_cd *, encode_dent_fn); + loff_t *, struct readdir_cd *, filldir_t); __be32 nfsd_statfs(struct svc_rqst *, struct svc_fh *, struct kstatfs *); diff --git a/include/linux/nfsd/xdr.h b/include/linux/nfsd/xdr.h index 877192d3ae7..67885d5e6e5 100644 --- a/include/linux/nfsd/xdr.h +++ b/include/linux/nfsd/xdr.h @@ -165,8 +165,8 @@ int nfssvc_encode_readres(struct svc_rqst *, __be32 *, struct nfsd_readres *); int nfssvc_encode_statfsres(struct svc_rqst *, __be32 *, struct nfsd_statfsres *); int nfssvc_encode_readdirres(struct svc_rqst *, __be32 *, struct nfsd_readdirres *); -int nfssvc_encode_entry(struct readdir_cd *, const char *name, - int namlen, loff_t offset, ino_t ino, unsigned int); +int nfssvc_encode_entry(void *, const char *name, + int namlen, loff_t offset, u64 ino, unsigned int); int nfssvc_release_fhandle(struct svc_rqst *, __be32 *, struct nfsd_fhandle *); diff --git a/include/linux/nfsd/xdr3.h b/include/linux/nfsd/xdr3.h index 79963867b0d..89d9d6061a6 100644 --- a/include/linux/nfsd/xdr3.h +++ b/include/linux/nfsd/xdr3.h @@ -331,11 +331,11 @@ int nfs3svc_release_fhandle(struct svc_rqst *, __be32 *, struct nfsd3_attrstat *); int nfs3svc_release_fhandle2(struct svc_rqst *, __be32 *, struct nfsd3_fhandle_pair *); -int nfs3svc_encode_entry(struct readdir_cd *, const char *name, - int namlen, loff_t offset, ino_t ino, +int nfs3svc_encode_entry(void *, const char *name, + int namlen, loff_t offset, u64 ino, unsigned int); -int nfs3svc_encode_entry_plus(struct readdir_cd *, const char *name, - int namlen, loff_t offset, ino_t ino, +int nfs3svc_encode_entry_plus(void *, const char *name, + int namlen, loff_t offset, u64 ino, unsigned int); /* Helper functions for NFSv3 ACL code */ __be32 *nfs3svc_encode_post_op_attr(struct svc_rqst *rqstp, __be32 *p, -- cgit v1.2.3 From 2a2275d630b982e5f90206f9bc497f6695a3ec5d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 26 Jan 2007 00:57:11 -0800 Subject: [PATCH] md: fix potential memalloc deadlock in md If a GFP_KERNEL allocation is attempted in md while the mddev_lock is held, it is possible for a deadlock to eventuate. This happens if the array was marked 'clean', and the memalloc triggers a write-out to the md device. For the writeout to succeed, the array must be marked 'dirty', and that requires getting the mddev_lock. So, before attempting a GFP_KERNEL allocation while holding the lock, make sure the array is marked 'dirty' (unless it is currently read-only). Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/raid/md.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h index 866a1e2b0ce..fbaeda79b2e 100644 --- a/include/linux/raid/md.h +++ b/include/linux/raid/md.h @@ -94,7 +94,7 @@ extern int sync_page_io(struct block_device *bdev, sector_t sector, int size, struct page *page, int rw); extern void md_do_sync(mddev_t *mddev); extern void md_new_event(mddev_t *mddev); - +extern void md_allow_write(mddev_t *mddev); #endif /* CONFIG_MD */ #endif -- cgit v1.2.3 From 8cdf92a98fa0f91068615443f2a8597b7f2c34ca Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Jan 2007 19:31:15 +0000 Subject: Fix Maple PATA IRQ assignment. On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse Signed-off-by: Jeff Garzik --- include/asm-generic/libata-portmap.h | 4 ++-- include/asm-powerpc/libata-portmap.h | 12 ++++++++++++ 2 files changed, 14 insertions(+), 2 deletions(-) create mode 100644 include/asm-powerpc/libata-portmap.h (limited to 'include') diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h index 9202fd02d5b..62fb3618293 100644 --- a/include/asm-generic/libata-portmap.h +++ b/include/asm-generic/libata-portmap.h @@ -3,10 +3,10 @@ #define ATA_PRIMARY_CMD 0x1F0 #define ATA_PRIMARY_CTL 0x3F6 -#define ATA_PRIMARY_IRQ 14 +#define ATA_PRIMARY_IRQ(dev) 14 #define ATA_SECONDARY_CMD 0x170 #define ATA_SECONDARY_CTL 0x376 -#define ATA_SECONDARY_IRQ 15 +#define ATA_SECONDARY_IRQ(dev) 15 #endif diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h new file mode 100644 index 00000000000..4d8518049f4 --- /dev/null +++ b/include/asm-powerpc/libata-portmap.h @@ -0,0 +1,12 @@ +#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H +#define __ASM_POWERPC_LIBATA_PORTMAP_H + +#define ATA_PRIMARY_CMD 0x1F0 +#define ATA_PRIMARY_CTL 0x3F6 +#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) + +#define ATA_SECONDARY_CMD 0x170 +#define ATA_SECONDARY_CTL 0x376 +#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) + +#endif -- cgit v1.2.3 From 677c0a78f6bf7aa87c90c4e015e014a17132c634 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 27 Jan 2007 13:46:54 +0100 Subject: ia64: add pci_get_legacy_ide_irq() Add pci_get_legacy_ide_irq() identical to the one used by i386/x86_64. Fixes amd74xx driver build on ia64 (bugzilla bug #6644). Signed-off-by: Bartlomiej Zolnierkiewicz --- include/asm-ia64/pci.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h index 556f53fa44c..5160233bbfa 100644 --- a/include/asm-ia64/pci.h +++ b/include/asm-ia64/pci.h @@ -167,4 +167,10 @@ pcibios_select_root(struct pci_dev *pdev, struct resource *res) #define pcibios_scan_all_fns(a, b) 0 +#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + #endif /* _ASM_IA64_PCI_H */ -- cgit v1.2.3 From e0b874df14052489e6408125903dba96b4dd7baa Mon Sep 17 00:00:00 2001 From: Josepch Chan Date: Sat, 27 Jan 2007 13:47:08 +0100 Subject: via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support for CX700 and 8237S This patch: * Corrects the wrong device ID of PCI_DEVICE_ID_VIA_SATA_EIDE from 0x0581 to 0x5324. * Adds VIA CX700 and VT8237S support in drivers/ide/pci/via82cxxx.c * Adds VIA VT8237S support in drivers/ata/pata_via.c Signed-off-by: Josepch Chan Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/pci_ids.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f7a416c52ed..e642b99f9a9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1283,7 +1283,6 @@ #define PCI_DEVICE_ID_VIA_82C561 0x0561 #define PCI_DEVICE_ID_VIA_82C586_1 0x0571 #define PCI_DEVICE_ID_VIA_82C576 0x0576 -#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x0581 #define PCI_DEVICE_ID_VIA_82C586_0 0x0586 #define PCI_DEVICE_ID_VIA_82C596 0x0596 #define PCI_DEVICE_ID_VIA_82C597_0 0x0597 @@ -1326,6 +1325,8 @@ #define PCI_DEVICE_ID_VIA_8237 0x3227 #define PCI_DEVICE_ID_VIA_8251 0x3287 #define PCI_DEVICE_ID_VIA_8237A 0x3337 +#define PCI_DEVICE_ID_VIA_8237S 0x3372 +#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 #define PCI_DEVICE_ID_VIA_8365_1 0x8305 -- cgit v1.2.3 From 43ed41f648554c9fecaf7597d25e05da63ec7290 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 28 Jan 2007 17:58:33 -0500 Subject: [AGPGART] Add new IDs to VIA AGP. Culled from the VIA codedrop. Also fixes up one ID used in amd64-agp to use the VIA part number instead of the board name in its ID. Signed-off-by: Dave Jones --- include/linux/pci_ids.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 5c87cd8a56f..083ad66e652 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1273,7 +1273,8 @@ #define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8363_0 0x0305 #define PCI_DEVICE_ID_VIA_P4M800CE 0x0314 -#define PCI_DEVICE_ID_VIA_K8M890CE 0x0336 +#define PCI_DEVICE_ID_VIA_P4M890 0x0327 +#define PCI_DEVICE_ID_VIA_VT3336 0x0336 #define PCI_DEVICE_ID_VIA_8371_0 0x0391 #define PCI_DEVICE_ID_VIA_8501_0 0x0501 #define PCI_DEVICE_ID_VIA_82C561 0x0561 -- cgit v1.2.3 From 7d2aae1e88660cf09be913e9754e45189dc33412 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 26 Jan 2007 12:40:31 +0100 Subject: [PATCH] ALSA: Fix sysfs breakage The recent change for a new sysfs tree with card* object breaks the /sys/class/sound tree if CONFIG_SYSFS_DEPRECATED is enabled. The device in each entry doesn't point the correct device object: /sys/class/sound ... |-- pcmC0D0c | |-- dev | |-- device -> ../../../class/sound/card0 | |-- pcm_class | |-- power | | `-- wakeup | |-- subsystem -> ../../../class/sound | `-- uevent Also, this change breaks some drivers (like sound/arm/*) referring card->dev directly to obtain the device object for memory handling. This patch reverts the semantics of card->dev to the former version, which points to a real device object. The card* object is stored in a new card->card_dev field, instead. The device parent is chosen either card->dev or card->card_dev according to CONFIG_SYSFS_DEPRECATED to keep the tree compatibility. Also, card* isn't created if CONFIG_SYSFS_DEPRECATED is enabled. The reason of card* object is a root of all beloing devices, and it makes little sense if each sound device points to the real device object directly. Signed-off-by: Takashi Iwai Acked-by: Monty Montgomery Signed-off-by: Greg Kroah-Hartman --- include/sound/core.h | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/sound/core.h b/include/sound/core.h index a994bea09cd..521f036cce9 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -132,8 +132,10 @@ struct snd_card { int shutdown; /* this card is going down */ int free_on_last_close; /* free in context of file_release */ wait_queue_head_t shutdown_sleep; - struct device *parent; - struct device *dev; + struct device *dev; /* device assigned to this card */ +#ifndef CONFIG_SYSFS_DEPRECATED + struct device *card_dev; /* cardX object for sysfs */ +#endif #ifdef CONFIG_PM unsigned int power_state; /* power state */ @@ -191,6 +193,16 @@ struct snd_minor { struct device *dev; /* device for sysfs */ }; +/* return a device pointer linked to each sound device as a parent */ +static inline struct device *snd_card_get_device_link(struct snd_card *card) +{ +#ifdef CONFIG_SYSFS_DEPRECATED + return card ? card->dev : NULL; +#else + return card ? card->card_dev : NULL; +#endif +} + /* sound.c */ extern int snd_major; @@ -257,7 +269,7 @@ int snd_card_file_add(struct snd_card *card, struct file *file); int snd_card_file_remove(struct snd_card *card, struct file *file); #ifndef snd_card_set_dev -#define snd_card_set_dev(card,devptr) ((card)->parent = (devptr)) +#define snd_card_set_dev(card,devptr) ((card)->dev = (devptr)) #endif /* device.c */ -- cgit v1.2.3 From 76398f9667e8369023ed5f4847fb59e9da8b6968 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 29 Jan 2007 12:44:41 +0100 Subject: HID: fix pb_fnmode and move it to generic HID The apple powerbook people are used to switch the pb_fnmode setting at runtime through writing to sysfs, altering the module parameter value. This was broken for them in 2.6.20-rc1 when generic HID layer was introduced, as the pb_fnmode flag was made per-hiddevice, instead of global variable. This patch moves the pb_fnmode module parameter from usbhid module to hid module, but apart from that retains backward compatibility with respect to changing the mode through sysfs. Signed-off-by: Jiri Kosina --- include/linux/hid.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 770120add15..342b4e639ac 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -438,7 +438,6 @@ struct hid_device { /* device report descriptor */ struct hid_usage *, __s32); void (*hiddev_report_event) (struct hid_device *, struct hid_report *); #ifdef CONFIG_USB_HIDINPUT_POWERBOOK - unsigned int pb_fnmode; unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; #endif -- cgit v1.2.3 From 7a238fcba0629b6f2edbcd37458bae56fcf36be5 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 29 Jan 2007 13:19:40 -0800 Subject: [PATCH] namespaces: fix exit race by splitting exit Fix exit race by splitting the nsproxy putting into two pieces. First piece reduces the nsproxy refcount. If we dropped the last reference, then it puts the mnt_ns, and returns the nsproxy as a hint to the caller. Else it returns NULL. The second piece of exiting task namespaces sets tsk->nsproxy to NULL, and drops the references to other namespaces and frees the nsproxy only if an nsproxy was passed in. A little awkward and should probably be reworked, but hopefully it fixes the NFS oops. Signed-off-by: Serge E. Hallyn Cc: Herbert Poetzl Cc: Oleg Nesterov Cc: "Eric W. Biederman" Cc: Cedric Le Goater Cc: Daniel Hokka Zakrisson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nsproxy.h | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index 0b9f0dc30d6..678e1d38eff 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -35,22 +35,30 @@ struct nsproxy *dup_namespaces(struct nsproxy *orig); int copy_namespaces(int flags, struct task_struct *tsk); void get_task_namespaces(struct task_struct *tsk); void free_nsproxy(struct nsproxy *ns); +struct nsproxy *put_nsproxy(struct nsproxy *ns); -static inline void put_nsproxy(struct nsproxy *ns) +static inline void finalize_put_nsproxy(struct nsproxy *ns) { - if (atomic_dec_and_test(&ns->count)) { + if (ns) free_nsproxy(ns); - } } -static inline void exit_task_namespaces(struct task_struct *p) +static inline void put_and_finalize_nsproxy(struct nsproxy *ns) { - struct nsproxy *ns = p->nsproxy; - if (ns) { - task_lock(p); - p->nsproxy = NULL; - task_unlock(p); - put_nsproxy(ns); - } + finalize_put_nsproxy(put_nsproxy(ns)); +} + +static inline struct nsproxy *preexit_task_namespaces(struct task_struct *p) +{ + return put_nsproxy(p->nsproxy); +} + +static inline void exit_task_namespaces(struct task_struct *p, + struct nsproxy *ns) +{ + task_lock(p); + p->nsproxy = NULL; + task_unlock(p); + finalize_put_nsproxy(ns); } #endif -- cgit v1.2.3 From 04611f98ce34f8911740ccd7e2bf0c22f818f622 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 29 Jan 2007 13:19:49 -0800 Subject: [PATCH] use __u8/__u32 in userspace ioctl defines for I2O Make sure exported I2O ioctls utilize userspace safe types. Signed-off-by: Mike Frysinger Cc: Markus Lidel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/i2o-dev.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h index c2519df1b6d..a0b23dd4523 100644 --- a/include/linux/i2o-dev.h +++ b/include/linux/i2o-dev.h @@ -24,12 +24,13 @@ #define MAX_I2O_CONTROLLERS 32 #include +#include /* * I2O Control IOCTLs and structures */ #define I2O_MAGIC_NUMBER 'i' -#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,u8[MAX_I2O_CONTROLLERS]) +#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS]) #define I2OHRTGET _IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct) #define I2OLCTGET _IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct) #define I2OPARMSET _IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget) @@ -37,7 +38,7 @@ #define I2OSWDL _IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer) #define I2OSWUL _IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer) #define I2OSWDEL _IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer) -#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,u32) +#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,__u32) #define I2OHTML _IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html) #define I2OEVTREG _IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id) #define I2OEVTGET _IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info) -- cgit v1.2.3 From a0f7b67ae470f3afed3f03d017fd1c29fd1b58b8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 29 Jan 2007 13:19:50 -0800 Subject: [PATCH] m68k: uaccess.h needs sched.h In file included from include/linux/crypto.h:26, from crypto/cipher.c:17: include/linux/uaccess.h: In function 'pagefault_disable': include/linux/uaccess.h:18: error: dereferencing pointer to incomplete type include/linux/uaccess.h: In function 'pagefault_enable': include/linux/uaccess.h:33: error: dereferencing pointer to incomplete type video_buf need PCI. Acked-by: Geert Uytterhoeven Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-m68k/uaccess.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h index e4c9f080ff2..6a4cf208151 100644 --- a/include/asm-m68k/uaccess.h +++ b/include/asm-m68k/uaccess.h @@ -7,6 +7,7 @@ #include #include #include +#include #include #define VERIFY_READ 0 -- cgit v1.2.3 From 436d1654b341e55a73cada13cce3142b619f23bb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 29 Jan 2007 13:19:53 -0800 Subject: [PATCH] use __u8 rather than u8 in userspace SIZE defines in hdreg.h Use __u8 rather than u8 in SIZE defines exported to userspace. Signed-off-by: Mike Frysinger Cc: Bartlomiej Zolnierkiewicz Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hdreg.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index 2b54eac738e..818c6afc109 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -60,13 +60,15 @@ #define TAG_MASK 0xf8 #endif /* __KERNEL__ */ +#include + /* * Command Header sizes for IOCTL commands */ -#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(u8)) -#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(u8)) -#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(u8)) +#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(__u8)) +#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8)) +#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8)) #define IDE_DRIVE_TASK_INVALID -1 #define IDE_DRIVE_TASK_NO_DATA 0 -- cgit v1.2.3 From 3d8b3036f5260b366ec0982aa2f862d841d058c2 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 29 Jan 2007 13:19:56 -0800 Subject: [PATCH] cdev.h: forward declarations Apparently this broke due to missing `struct inode' declaration. Signed-off-by: Jan Engelhardt Cc: Noah Watkins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cdev.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/cdev.h b/include/linux/cdev.h index f309b00e986..1e29b13d006 100644 --- a/include/linux/cdev.h +++ b/include/linux/cdev.h @@ -6,6 +6,10 @@ #include #include +struct file_operations; +struct inode; +struct module; + struct cdev { struct kobject kobj; struct module *owner; -- cgit v1.2.3 From 701dfbc1cbdd42b814dd76a885c4b73f97011d08 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 29 Jan 2007 21:24:08 +0000 Subject: [PATCH] mm: mremap correct rmap accounting Nick Piggin points out that page accounting on MIPS multiple ZERO_PAGEs is not maintained by its move_pte, and could lead to freeing a ZERO_PAGE. Instead of complicating that move_pte, just forget the minor optimization when mremapping, and change the one thing which needed it for correctness - filemap_xip use ZERO_PAGE(0) throughout instead of according to address. [ "There is no block device driver one could use for XIP on mips platforms" - Carsten Otte ] Signed-off-by: Hugh Dickins Cc: Nick Piggin Cc: Andrew Morton Cc: Ralf Baechle Cc: Carsten Otte Signed-off-by: Linus Torvalds --- include/asm-mips/pgtable.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'include') diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index f2e1325fec6..3fcfd7979de 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -69,16 +69,6 @@ extern unsigned long zero_page_mask; #define ZERO_PAGE(vaddr) \ (virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))) -#define __HAVE_ARCH_MOVE_PTE -#define move_pte(pte, prot, old_addr, new_addr) \ -({ \ - pte_t newpte = (pte); \ - if (pte_present(pte) && pfn_valid(pte_pfn(pte)) && \ - pte_page(pte) == ZERO_PAGE(old_addr)) \ - newpte = mk_pte(ZERO_PAGE(new_addr), (prot)); \ - newpte; \ -}) - extern void paging_init(void); /* -- cgit v1.2.3 From d0a23398eeaa374eb0c0435c5a259ffde77c8af0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 30 Jan 2007 13:23:55 +0000 Subject: [PATCH] missing dma_sync_single_range_for{cpu,device} on alpha no-op as all dma_sync_... there. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/asm-alpha/dma-mapping.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h index 57e09f5e342..1919d72f4c7 100644 --- a/include/asm-alpha/dma-mapping.h +++ b/include/asm-alpha/dma-mapping.h @@ -55,12 +55,14 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dma_set_mask(struct device *dev, u64 mask); -#define dma_sync_single_for_cpu(dev, addr, size, dir) do { } while (0) -#define dma_sync_single_for_device(dev, addr, size, dir) do { } while (0) -#define dma_sync_single_range(dev, addr, off, size, dir) do { } while (0) -#define dma_sync_sg_for_cpu(dev, sg, nents, dir) do { } while (0) -#define dma_sync_sg_for_device(dev, sg, nents, dir) do { } while (0) -#define dma_cache_sync(dev, va, size, dir) do { } while (0) +#define dma_sync_single_for_cpu(dev, addr, size, dir) ((void)0) +#define dma_sync_single_for_device(dev, addr, size, dir) ((void)0) +#define dma_sync_single_range(dev, addr, off, size, dir) ((void)0) +#define dma_sync_sg_for_cpu(dev, sg, nents, dir) ((void)0) +#define dma_sync_sg_for_device(dev, sg, nents, dir) ((void)0) +#define dma_cache_sync(dev, va, size, dir) ((void)0) +#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir) ((void)0) +#define dma_sync_single_range_for_device(dev, addr, offset, size, dir) ((void)0) #define dma_get_cache_alignment() L1_CACHE_BYTES -- cgit v1.2.3 From 6a13f66043cd755fc7e19f8e0fbb5bfcdf470e74 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 30 Jan 2007 13:24:00 +0000 Subject: [PATCH] dma-mapping.h stubs fix do { } while(0) is not a good imitation of function returning void; use ((void)0) instead. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/asm-alpha/dma-mapping.h | 6 +++--- include/asm-powerpc/dma-mapping.h | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h index 1919d72f4c7..75a1aff5b57 100644 --- a/include/asm-alpha/dma-mapping.h +++ b/include/asm-alpha/dma-mapping.h @@ -41,9 +41,9 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, #define dma_map_single(dev, va, size, dir) virt_to_phys(va) #define dma_map_page(dev, page, off, size, dir) (page_to_pa(page) + off) -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) -#define dma_unmap_page(dev, addr, size, dir) do { } while (0) -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) +#define dma_unmap_single(dev, addr, size, dir) ((void)0) +#define dma_unmap_page(dev, addr, size, dir) ((void)0) +#define dma_unmap_sg(dev, sg, nents, dir) ((void)0) #define dma_mapping_error(addr) (0) diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 7c7de87bd8a..a19a6f1a1cf 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -37,9 +37,9 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, */ #define __dma_alloc_coherent(gfp, size, handle) NULL -#define __dma_free_coherent(size, addr) do { } while (0) -#define __dma_sync(addr, size, rw) do { } while (0) -#define __dma_sync_page(pg, off, sz, rw) do { } while (0) +#define __dma_free_coherent(size, addr) ((void)0) +#define __dma_sync(addr, size, rw) ((void)0) +#define __dma_sync_page(pg, off, sz, rw) ((void)0) #endif /* ! CONFIG_NOT_COHERENT_CACHE */ @@ -251,7 +251,7 @@ dma_map_single(struct device *dev, void *ptr, size_t size, } /* We do nothing. */ -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) +#define dma_unmap_single(dev, addr, size, dir) ((void)0) static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, @@ -266,7 +266,7 @@ dma_map_page(struct device *dev, struct page *page, } /* We do nothing. */ -#define dma_unmap_page(dev, handle, size, dir) do { } while (0) +#define dma_unmap_page(dev, handle, size, dir) ((void)0) static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, @@ -286,7 +286,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, } /* We don't do anything here. */ -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) +#define dma_unmap_sg(dev, sg, nents, dir) ((void)0) #endif /* CONFIG_PPC64 */ -- cgit v1.2.3 From 444f378b237a0f728f5c4aba752c08d13c209344 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 30 Jan 2007 13:35:18 -0800 Subject: Revert "[PATCH] namespaces: fix exit race by splitting exit" This reverts commit 7a238fcba0629b6f2edbcd37458bae56fcf36be5 in preparation for a better and simpler fix proposed by Eric Biederman (and fixed up by Serge Hallyn) Acked-by: Serge E. Hallyn Signed-off-by: Linus Torvalds --- include/linux/nsproxy.h | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index 678e1d38eff..0b9f0dc30d6 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -35,30 +35,22 @@ struct nsproxy *dup_namespaces(struct nsproxy *orig); int copy_namespaces(int flags, struct task_struct *tsk); void get_task_namespaces(struct task_struct *tsk); void free_nsproxy(struct nsproxy *ns); -struct nsproxy *put_nsproxy(struct nsproxy *ns); -static inline void finalize_put_nsproxy(struct nsproxy *ns) +static inline void put_nsproxy(struct nsproxy *ns) { - if (ns) + if (atomic_dec_and_test(&ns->count)) { free_nsproxy(ns); + } } -static inline void put_and_finalize_nsproxy(struct nsproxy *ns) +static inline void exit_task_namespaces(struct task_struct *p) { - finalize_put_nsproxy(put_nsproxy(ns)); -} - -static inline struct nsproxy *preexit_task_namespaces(struct task_struct *p) -{ - return put_nsproxy(p->nsproxy); -} - -static inline void exit_task_namespaces(struct task_struct *p, - struct nsproxy *ns) -{ - task_lock(p); - p->nsproxy = NULL; - task_unlock(p); - finalize_put_nsproxy(ns); + struct nsproxy *ns = p->nsproxy; + if (ns) { + task_lock(p); + p->nsproxy = NULL; + task_unlock(p); + put_nsproxy(ns); + } } #endif -- cgit v1.2.3 From 0f2452855d86901ba3766826ccb5606ea4e15ab9 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Tue, 30 Jan 2007 15:28:23 -0600 Subject: [PATCH] namespaces: fix task exit disaster This is based on a patch by Eric W. Biederman, who pointed out that pid namespaces are still fake, and we only have one ever active. So for the time being, we can modify any code which could access tsk->nsproxy->pid_ns during task exit to just use &init_pid_ns instead, and move the exit_task_namespaces call in do_exit() back above exit_notify(), so that an exiting nfs server has a valid tsk->sighand to work with. Long term, pulling pid_ns out of nsproxy might be the cleanest solution. Signed-off-by: Eric W. Biederman [ Eric's patch fixed to take care of free_pid() too ] Signed-off-by: Serge E. Hallyn Signed-off-by: Linus Torvalds --- include/linux/pid_namespace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index d2a9d419f01..2833806d42c 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -39,7 +39,7 @@ static inline void put_pid_ns(struct pid_namespace *ns) static inline struct task_struct *child_reaper(struct task_struct *tsk) { - return tsk->nsproxy->pid_ns->child_reaper; + return init_pid_ns.child_reaper; } #endif /* _LINUX_PID_NS_H */ -- cgit v1.2.3 From e7bc537db9e13adee1f294aa370f16d80f40b73d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 1 Feb 2007 13:08:45 +0000 Subject: [PATCH] fix frv headers_check a) registers.h is really needed there b) include of asm-generic/termios should be under __KERNEL__ c) includes of asm-generic/{memory_model,page} should be under __KERNEL (nothing in there that would work in userland) d) a lot of stuff in ptrace.h should be under __KERNEL__. Signed-off-by: Al Viro Acked-by: David Howells Signed-off-by: Linus Torvalds --- include/asm-frv/Kbuild | 6 ++++++ include/asm-frv/page.h | 4 ++-- include/asm-frv/ptrace.h | 4 ++++ include/asm-frv/termios.h | 2 ++ 4 files changed, 14 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild index c68e1680da0..966a9836d55 100644 --- a/include/asm-frv/Kbuild +++ b/include/asm-frv/Kbuild @@ -1 +1,7 @@ include include/asm-generic/Kbuild.asm + +header-y += registers.h + +unifdef-y += termios.h +unifdef-y += ptrace.h +unifdef-y += page.h diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h index 134cc0cdf6c..213d92fd652 100644 --- a/include/asm-frv/page.h +++ b/include/asm-frv/page.h @@ -76,8 +76,6 @@ extern unsigned long max_pfn; #endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC #define WANT_PAGE_VIRTUAL 1 #endif @@ -85,4 +83,6 @@ extern unsigned long max_pfn; #include #include +#endif /* __KERNEL__ */ + #endif /* _ASM_PAGE_H */ diff --git a/include/asm-frv/ptrace.h b/include/asm-frv/ptrace.h index 9a2241b8eb1..cf6934012b6 100644 --- a/include/asm-frv/ptrace.h +++ b/include/asm-frv/ptrace.h @@ -12,9 +12,11 @@ #define _ASM_PTRACE_H #include +#ifdef __KERNEL__ #include #define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0) +#endif #define PT_PSR 0 @@ -60,6 +62,7 @@ #define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ #define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ +#ifdef __KERNEL__ #ifndef __ASSEMBLY__ /* @@ -74,6 +77,7 @@ register struct pt_regs *__frame asm("gr28"); extern unsigned long user_stack(const struct pt_regs *); extern void show_regs(struct pt_regs *); #define profile_pc(regs) ((regs)->pc) +#endif #endif /* !__ASSEMBLY__ */ #endif /* _ASM_PTRACE_H */ diff --git a/include/asm-frv/termios.h b/include/asm-frv/termios.h index b4a664e7f55..8840cf95e8d 100644 --- a/include/asm-frv/termios.h +++ b/include/asm-frv/termios.h @@ -69,6 +69,8 @@ struct termio { #define N_SYNC_PPP 14 #define N_HCI 15 /* Bluetooth HCI UART */ +#ifdef __KERNEL__ #include +#endif #endif /* _ASM_TERMIOS_H */ -- cgit v1.2.3 From 472ba91dd9ce76b586d4d513f7e3448330eec7eb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 1 Feb 2007 13:52:54 +0000 Subject: [PATCH] efi_set_rtc_mmss() is not __init fix the extern in efi.h Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/efi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/efi.h b/include/linux/efi.h index df1c91855f0..f8ebd7c1ddb 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -301,7 +301,7 @@ extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource); extern unsigned long efi_get_time(void); -extern int __init efi_set_rtc_mmss(unsigned long nowtime); +extern int efi_set_rtc_mmss(unsigned long nowtime); extern int is_available_memory(efi_memory_desc_t * md); extern struct efi_memory_map memmap; -- cgit v1.2.3 From 04add672cf98a788e9e0d753b2ccfa4a3a0caf56 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 1 Feb 2007 13:53:04 +0000 Subject: [PATCH] uml-i386: fix build breakage with CONFIG_HIGHMEM missing helper used by arch/i386/mm/highmem.c, which is pulled into build on that configuration. Signed-off-by: Al Viro Acked-by: Jeff Dike Signed-off-by: Linus Torvalds --- include/asm-um/pgtable.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include') diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h index 188f7262177..e57ff136ee5 100644 --- a/include/asm-um/pgtable.h +++ b/include/asm-um/pgtable.h @@ -408,6 +408,15 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #include +#ifdef CONFIG_HIGHMEM +/* Clear a kernel PTE and flush it from the TLB */ +#define kpte_clear_flush(ptep, vaddr) \ +do { \ + pte_clear(&init_mm, vaddr, ptep); \ + __flush_tlb_one(vaddr); \ +} while (0) +#endif + #endif #endif -- cgit v1.2.3 From 51bcf092917bfaa88d762879d0bbfe7619e8c16c Mon Sep 17 00:00:00 2001 From: Bob Breuer Date: Thu, 1 Feb 2007 20:24:35 -0800 Subject: [SPARC32]: Fix over-optimization by GCC near ip_fast_csum. In some cases such as: iph->check = 0; iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); GCC may optimize out the previous store. Observed as a failure of NFS over udp (bad checksums on ip fragments) when compiled with GCC 3.4.2. Signed-off-by: Bob Breuer Signed-off-by: David S. Miller --- include/asm-sparc/checksum.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h index 267e631e9bb..34518ea7bf1 100644 --- a/include/asm-sparc/checksum.h +++ b/include/asm-sparc/checksum.h @@ -151,7 +151,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) "xnor\t%%g0, %0, %0" : "=r" (sum), "=&r" (iph) : "r" (ihl), "1" (iph) - : "g2", "g3", "g4", "cc"); + : "g2", "g3", "g4", "cc", "memory"); return sum; } -- cgit v1.2.3 From 0777721c9b270f087bf967369c9acbee3f1a12ae Mon Sep 17 00:00:00 2001 From: Alan Date: Wed, 31 Jan 2007 17:47:24 +0000 Subject: libata: Fix ata_busy_wait() kernel docs > Looks like you should use ata_busy_wait() here, rather than reproducing > the same code again. It waits in 10uS chunks while 1uS chunks were used in the workaround. Could indeed do that once I know the fix is right. While I'm at it the ata_busy_wait kerneldoc is borked so here's a fix Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 22aa69e2090..91bb8ceef0b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1054,6 +1054,8 @@ static inline void ata_pause(struct ata_port *ap) /** * ata_busy_wait - Wait for a port status register * @ap: Port to wait for. + * @bits: bits that must be clear + * @max: number of 10uS waits to perform * * Waits up to max*10 microseconds for the selected bits in the port's * status register to be cleared. -- cgit v1.2.3 From c81da66608d65dab04730582dfdfcdcab779e2fe Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:18 +0300 Subject: ACPICA: Delete recursive feature of ACPI Global Lock Completed a new design and implementation for the ACPI Global Lock support. On the OS side, the global lock is now treated as a standard AML mutex. Previously, multiple OS threads could acquire the global lock simultaneously, but this could cause the BIOS to be starved by the lock in cases such as the Embedded Controller driver, where there is a tight coupling between the OS and the BIOS. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acglobal.h | 2 +- include/acpi/acinterp.h | 6 ------ include/acpi/aclocal.h | 1 - 3 files changed, 1 insertion(+), 8 deletions(-) (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 06972e6637d..bf4318447f1 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -197,6 +197,7 @@ ACPI_EXTERN struct acpi_mutex_info acpi_gbl_mutex_info[ACPI_NUM_MUTEX]; /* * Global lock semaphore works in conjunction with the actual HW global lock */ +ACPI_EXTERN acpi_mutex acpi_gbl_global_lock_mutex; ACPI_EXTERN acpi_semaphore acpi_gbl_global_lock_semaphore; /* @@ -240,7 +241,6 @@ ACPI_EXTERN struct acpi_walk_state *acpi_gbl_breakpoint_walk; /* Misc */ -ACPI_EXTERN u32 acpi_gbl_global_lock_thread_count; ACPI_EXTERN u32 acpi_gbl_original_mode; ACPI_EXTERN u32 acpi_gbl_rsdp_original_location; ACPI_EXTERN u32 acpi_gbl_ns_lookup_count; diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h index 91586d0d5bb..f266b385115 100644 --- a/include/acpi/acinterp.h +++ b/include/acpi/acinterp.h @@ -277,12 +277,6 @@ acpi_status acpi_ex_system_do_suspend(acpi_integer time); acpi_status acpi_ex_system_do_stall(u32 time); -acpi_status -acpi_ex_system_acquire_mutex(union acpi_operand_object *time, - union acpi_operand_object *obj_desc); - -acpi_status acpi_ex_system_release_mutex(union acpi_operand_object *obj_desc); - acpi_status acpi_ex_system_signal_event(union acpi_operand_object *obj_desc); acpi_status diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index 063c4b54290..d5421403089 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -51,7 +51,6 @@ #define ACPI_SERIALIZED 0xFF typedef u32 acpi_mutex_handle; -#define ACPI_GLOBAL_LOCK (acpi_semaphore) (-1) /* Total number of aml opcodes defined */ -- cgit v1.2.3 From f93a21c7184de3db962d01f11eb2ddad5396c824 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:18 +0300 Subject: ACPICA: Update version to 20060721 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index ebc1f697615..7ece21369bb 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20060707 +#define ACPI_CA_VERSION 0x20060721 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From f3d2e7865c816258c699ff965768e46b50d536d3 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:18 +0300 Subject: ACPICA: Implement simplified Table Manager The Table Manager component has been completely redesigned and reimplemented. The new design is much simpler, and reduces the overall code and data size of the kernel-resident ACPICA by approximately 5%. Also, it is now possible to obtain the ACPI tables very early during kernel initialization, even before dynamic memory management is initialized. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 11 +- include/acpi/acdispat.h | 2 +- include/acpi/acglobal.h | 42 +---- include/acpi/aclocal.h | 39 ++-- include/acpi/acnamesp.h | 9 +- include/acpi/acpiosxf.h | 6 +- include/acpi/acpixf.h | 28 +-- include/acpi/acstruct.h | 3 +- include/acpi/actables.h | 103 +++-------- include/acpi/actbl.h | 328 +++++++++++++-------------------- include/acpi/actbl1.h | 472 +++++++++++++++++++++++------------------------- include/acpi/actypes.h | 56 +----- 12 files changed, 456 insertions(+), 643 deletions(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 7ece21369bb..40f856c0f10 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20060721 +#define ACPI_CA_VERSION 0x20060823 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, @@ -115,6 +115,10 @@ #define ACPI_NUM_OWNERID_MASKS 8 +/* Size of the root table array is increased by this increment */ + +#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 + /****************************************************************************** * * ACPI Specification constants (Do not change unless the specification changes) @@ -152,6 +156,11 @@ #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ #define ACPI_PATH_SEPARATOR '.' +/* Sizes for ACPI table headers */ + +#define ACPI_OEM_ID_SIZE 6 +#define ACPI_OEM_TABLE_ID_SIZE 8 + /* Constants used in searching for the RSDP in low memory */ #define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h index a22fe9cf849..f0272d41d96 100644 --- a/include/acpi/acdispat.h +++ b/include/acpi/acdispat.h @@ -210,7 +210,7 @@ acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state); * dsinit */ acpi_status -acpi_ds_initialize_objects(struct acpi_table_desc *table_desc, +acpi_ds_initialize_objects(acpi_native_uint table_index, struct acpi_namespace_node *start_node); /* diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index bf4318447f1..82d42b82594 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -140,47 +140,23 @@ ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE); ****************************************************************************/ /* - * Table pointers. - * Although these pointers are somewhat redundant with the global acpi_table, - * they are convenient because they are typed pointers. + * acpi_gbl_root_table_list is the master list of ACPI tables found in the + * RSDT/XSDT. * - * These tables are single-table only; meaning that there can be at most one - * of each in the system. Each global points to the actual table. + * acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */ -ACPI_EXTERN u32 acpi_gbl_table_flags; -ACPI_EXTERN u32 acpi_gbl_rsdt_table_count; -ACPI_EXTERN struct rsdp_descriptor *acpi_gbl_RSDP; -ACPI_EXTERN struct xsdt_descriptor *acpi_gbl_XSDT; -ACPI_EXTERN struct fadt_descriptor *acpi_gbl_FADT; -ACPI_EXTERN struct acpi_table_header *acpi_gbl_DSDT; -ACPI_EXTERN struct facs_descriptor *acpi_gbl_FACS; -ACPI_EXTERN struct acpi_common_facs acpi_gbl_common_fACS; -/* - * Since there may be multiple SSDTs and PSDTs, a single pointer is not - * sufficient; Therefore, there isn't one! - */ - -/* The root table can be either an RSDT or an XSDT */ - -ACPI_EXTERN u8 acpi_gbl_root_table_type; -#define ACPI_TABLE_TYPE_RSDT 'R' -#define ACPI_TABLE_TYPE_XSDT 'X' +ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list; +ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT; /* - * Handle both ACPI 1.0 and ACPI 2.0 Integer widths: - * If we are executing a method that exists in a 32-bit ACPI table, - * use only the lower 32 bits of the (internal) 64-bit Integer. + * Handle both ACPI 1.0 and ACPI 2.0 Integer widths. The integer width is + * determined by the revision of the DSDT: If the DSDT revision is less than + * 2, use only the lower 32 bits of the internal 64-bit Integer. */ ACPI_EXTERN u8 acpi_gbl_integer_bit_width; ACPI_EXTERN u8 acpi_gbl_integer_byte_width; ACPI_EXTERN u8 acpi_gbl_integer_nybble_width; -/* - * ACPI Table info arrays - */ -extern struct acpi_table_list acpi_gbl_table_lists[ACPI_TABLE_ID_MAX + 1]; -extern struct acpi_table_support acpi_gbl_table_data[ACPI_TABLE_ID_MAX + 1]; - /***************************************************************************** * * Mutual exlusion within ACPICA subsystem @@ -188,7 +164,7 @@ extern struct acpi_table_support acpi_gbl_table_data[ACPI_TABLE_ID_MAX + 1]; ****************************************************************************/ /* - * Predefined mutex objects. This array contains the + * Predefined mutex objects. This array contains the * actual OS mutex handles, indexed by the local ACPI_MUTEX_HANDLEs. * (The table maps local handles to the real OS handles) */ diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index d5421403089..0f12fecba63 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -51,6 +51,7 @@ #define ACPI_SERIALIZED 0xFF typedef u32 acpi_mutex_handle; +#define ACPI_GLOBAL_LOCK (acpi_semaphore) (-1) /* Total number of aml opcodes defined */ @@ -79,8 +80,8 @@ union acpi_parse_object; * table below also! */ #define ACPI_MTX_INTERPRETER 0 /* AML Interpreter, main lock */ -#define ACPI_MTX_TABLES 1 /* Data for ACPI tables */ -#define ACPI_MTX_NAMESPACE 2 /* ACPI Namespace */ +#define ACPI_MTX_NAMESPACE 1 /* ACPI Namespace */ +#define ACPI_MTX_TABLES 2 /* Data for ACPI tables */ #define ACPI_MTX_EVENTS 3 /* Data for ACPI events */ #define ACPI_MTX_CACHES 4 /* Internal caches, general purposes */ #define ACPI_MTX_MEMORY 5 /* Debug memory tracking lists */ @@ -218,25 +219,35 @@ struct acpi_namespace_node { * ACPI Table Descriptor. One per ACPI table */ struct acpi_table_desc { - struct acpi_table_desc *prev; - struct acpi_table_desc *next; - struct acpi_table_desc *installed_desc; + acpi_physical_address address; struct acpi_table_header *pointer; - u8 *aml_start; - u64 physical_address; - acpi_size length; - u32 aml_length; + u32 length; /* Length fixed at 32 bits */ + union acpi_name_union signature; acpi_owner_id owner_id; - u8 type; - u8 allocation; - u8 loaded_into_namespace; + u8 flags; }; -struct acpi_table_list { - struct acpi_table_desc *next; +struct acpi_internal_rsdt { + struct acpi_table_desc *tables; u32 count; + u32 size; + u8 flags; }; +/* Flags for both structs above */ + +#define ACPI_TABLE_ORIGIN_UNKNOWN (0) +#define ACPI_TABLE_ORIGIN_MAPPED (1) +#define ACPI_TABLE_ORIGIN_ALLOCATED (2) +#define ACPI_TABLE_ORIGIN_MASK (3) +#define ACPI_TABLE_FLAGS_LOADED (4) +#define ACPI_TABLE_FLAGS_ALLOW_RESIZE (8) + +/* Predefined (fixed) table indexes */ + +#define ACPI_TABLE_INDEX_DSDT (0) +#define ACPI_TABLE_INDEX_FACS (1) + struct acpi_find_context { char *search_for; acpi_handle *list; diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h index 83b52f9f899..b3b9f0ec79c 100644 --- a/include/acpi/acnamesp.h +++ b/include/acpi/acnamesp.h @@ -82,7 +82,7 @@ acpi_status acpi_ns_initialize_devices(void); acpi_status acpi_ns_load_namespace(void); acpi_status -acpi_ns_load_table(struct acpi_table_desc *table_desc, +acpi_ns_load_table(acpi_native_uint table_index, struct acpi_namespace_node *node); /* @@ -106,11 +106,12 @@ struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, * nsparse - table parsing */ acpi_status -acpi_ns_parse_table(struct acpi_table_desc *table_desc, - struct acpi_namespace_node *scope); +acpi_ns_parse_table(acpi_native_uint table_index, + struct acpi_namespace_node *start_node); acpi_status -acpi_ns_one_complete_parse(u8 pass_number, struct acpi_table_desc *table_desc); +acpi_ns_one_complete_parse(acpi_native_uint pass_number, + acpi_native_uint table_index); /* * nsaccess - Top-level namespace access diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 0cd63bce0ae..9a5ffcf88f5 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -85,7 +85,7 @@ acpi_status acpi_os_terminate(void); /* * ACPI Table interfaces */ -acpi_status acpi_os_get_root_pointer(u32 flags, struct acpi_pointer *address); +acpi_physical_address acpi_os_get_root_pointer(void); acpi_status acpi_os_predefined_override(const struct acpi_predefined_names *init_val, @@ -143,9 +143,7 @@ void acpi_os_release_mutex(acpi_mutex handle); */ void *acpi_os_allocate(acpi_size size); -acpi_status -acpi_os_map_memory(acpi_physical_address physical_address, - acpi_size size, void __iomem ** logical_address); +void __iomem *acpi_os_map_memory(acpi_physical_address where, acpi_native_uint length); void acpi_os_unmap_memory(void __iomem * logical_address, acpi_size size); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 81458767a90..f4b0a81ee7c 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -51,6 +51,10 @@ /* * Global interfaces */ +acpi_status +acpi_initialize_tables(struct acpi_table_desc *initial_storage, + u32 initial_table_count, u8 allow_resize); + acpi_status acpi_initialize_subsystem(void); acpi_status acpi_enable_subsystem(u32 flags); @@ -92,30 +96,28 @@ void acpi_free(void *address); /* * ACPI table manipulation interfaces */ -acpi_status -acpi_find_root_pointer(u32 flags, struct acpi_pointer *rsdp_address); +acpi_status acpi_reallocate_root_table(void); + +acpi_status acpi_find_root_pointer(acpi_native_uint * rsdp_address); acpi_status acpi_load_tables(void); acpi_status acpi_load_table(struct acpi_table_header *table_ptr); -acpi_status acpi_unload_table_id(acpi_table_type table_type, acpi_owner_id id); +acpi_status acpi_unload_table_id(acpi_owner_id id); -#ifdef ACPI_FUTURE_USAGE -acpi_status acpi_unload_table(acpi_table_type table_type); acpi_status -acpi_get_table_header(acpi_table_type table_type, - u32 instance, struct acpi_table_header *out_table_header); -#endif /* ACPI_FUTURE_USAGE */ +acpi_get_table_header(acpi_string signature, + acpi_native_uint instance, + struct acpi_table_header **out_table_header); acpi_status -acpi_get_table(acpi_table_type table_type, - u32 instance, struct acpi_buffer *ret_buffer); +acpi_get_table(acpi_string signature, + acpi_native_uint instance, struct acpi_table_header **out_table); acpi_status -acpi_get_firmware_table(acpi_string signature, - u32 instance, - u32 flags, struct acpi_table_header **table_pointer); +acpi_get_table_by_index(acpi_native_uint table_index, + struct acpi_table_header **out_table); /* * Namespace and name interfaces diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h index 5e8095f0f78..9c800b6cd8c 100644 --- a/include/acpi/acstruct.h +++ b/include/acpi/acstruct.h @@ -139,7 +139,8 @@ struct acpi_init_walk_info { u16 buffer_init; u16 package_init; u16 object_count; - struct acpi_table_desc *table_desc; + acpi_owner_id owner_id; + acpi_native_uint table_index; }; struct acpi_get_devices_info { diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 4dbaf02fe52..1737a2f045f 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -44,105 +44,62 @@ #ifndef __ACTABLES_H__ #define __ACTABLES_H__ -/* Used in acpi_tb_map_acpi_table for size parameter if table header is to be used */ - -#define SIZE_IN_HEADER 0 - -/* - * tbconvrt - Table conversion routines - */ -acpi_status acpi_tb_convert_to_xsdt(struct acpi_table_desc *table_info); - -acpi_status acpi_tb_convert_table_fadt(void); - -acpi_status acpi_tb_build_common_facs(struct acpi_table_desc *table_info); - -u32 -acpi_tb_get_table_count(struct rsdp_descriptor *RSDP, - struct acpi_table_header *RSDT); - /* - * tbget - Table "get" routines + * tbfind - find ACPI table */ acpi_status -acpi_tb_get_table(struct acpi_pointer *address, - struct acpi_table_desc *table_info); - -acpi_status -acpi_tb_get_table_header(struct acpi_pointer *address, - struct acpi_table_header *return_header); - -acpi_status -acpi_tb_get_table_body(struct acpi_pointer *address, - struct acpi_table_header *header, - struct acpi_table_desc *table_info); - -acpi_status -acpi_tb_get_table_ptr(acpi_table_type table_type, - u32 instance, struct acpi_table_header **table_ptr_loc); - -acpi_status acpi_tb_verify_rsdp(struct acpi_pointer *address); - -void acpi_tb_get_rsdt_address(struct acpi_pointer *out_address); - -acpi_status acpi_tb_validate_rsdt(struct acpi_table_header *table_ptr); +acpi_tb_find_table(char *signature, + char *oem_id, + char *oem_table_id, acpi_native_uint * table_index); /* - * tbgetall - get multiple required tables + * tbinstal - Table removal and deletion */ -acpi_status acpi_tb_get_required_tables(void); +acpi_status acpi_tb_resize_root_table_list(void); -/* - * tbinstall - Table installation - */ -acpi_status acpi_tb_install_table(struct acpi_table_desc *table_info); +acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); acpi_status -acpi_tb_recognize_table(struct acpi_table_desc *table_info, u8 search_type); +acpi_tb_add_table(struct acpi_table_header *table, + acpi_native_uint * table_index); acpi_status -acpi_tb_init_table_descriptor(acpi_table_type table_type, - struct acpi_table_desc *table_info); +acpi_tb_store_table(acpi_physical_address address, + struct acpi_table_header *table, + u32 length, u8 flags, acpi_native_uint * table_index); -/* - * tbremove - Table removal and deletion - */ -void acpi_tb_delete_all_tables(void); +void acpi_tb_delete_table(acpi_native_uint table_index); -void acpi_tb_delete_tables_by_type(acpi_table_type type); +void acpi_tb_terminate(void); -void acpi_tb_delete_single_table(struct acpi_table_desc *table_desc); +void acpi_tb_delete_namespace_by_owner(acpi_native_uint table_index); -struct acpi_table_desc *acpi_tb_uninstall_table(struct acpi_table_desc - *table_desc); +acpi_status acpi_tb_allocate_owner_id(acpi_native_uint table_index); + +acpi_status acpi_tb_release_owner_id(acpi_native_uint table_index); -/* - * tbxfroot - RSDP, RSDT utilities - */ acpi_status -acpi_tb_find_table(char *signature, - char *oem_id, - char *oem_table_id, struct acpi_table_header **table_ptr); +acpi_tb_get_owner_id(acpi_native_uint table_index, acpi_owner_id * owner_id); -acpi_status acpi_tb_get_table_rsdt(void); +u8 acpi_tb_is_table_loaded(acpi_native_uint table_index); -acpi_status acpi_tb_validate_rsdp(struct rsdp_descriptor *rsdp); +void acpi_tb_set_table_loaded_flag(acpi_native_uint table_index, u8 is_loaded); /* - * tbutils - common table utilities + * tbutils - table manager utilities */ -acpi_status acpi_tb_is_table_installed(struct acpi_table_desc *new_table_desc); +void +acpi_tb_print_table_header(acpi_physical_address address, + struct acpi_table_header *header); -acpi_status -acpi_tb_verify_table_checksum(struct acpi_table_header *table_header); +u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length); -u8 acpi_tb_sum_table(void *buffer, u32 length); +void acpi_tb_convert_fadt(struct acpi_table_fadt *fadt); -u8 acpi_tb_generate_checksum(struct acpi_table_header *table); +acpi_status acpi_tb_parse_root_table(struct acpi_table_rsdp *rsdp, u8 flags); -void acpi_tb_set_checksum(struct acpi_table_header *table); +void *acpi_tb_map(acpi_physical_address address, u32 length, u32 flags); -acpi_status -acpi_tb_validate_table_header(struct acpi_table_header *table_header); +void acpi_tb_unmap(void *pointer, u32 length, u32 flags); #endif /* __ACTABLES_H__ */ diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index b125ceed9cb..b455f540a16 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -48,15 +48,15 @@ * Values for description table header signatures. Useful because they make * it more difficult to inadvertently type in the wrong signature. */ -#define DSDT_SIG "DSDT" /* Differentiated System Description Table */ -#define FADT_SIG "FACP" /* Fixed ACPI Description Table */ -#define FACS_SIG "FACS" /* Firmware ACPI Control Structure */ -#define PSDT_SIG "PSDT" /* Persistent System Description Table */ -#define RSDP_SIG "RSD PTR " /* Root System Description Pointer */ -#define RSDT_SIG "RSDT" /* Root System Description Table */ -#define XSDT_SIG "XSDT" /* Extended System Description Table */ -#define SSDT_SIG "SSDT" /* Secondary System Description Table */ -#define RSDP_NAME "RSDP" +#define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */ +#define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */ +#define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */ +#define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */ +#define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */ +#define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */ +#define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */ +#define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */ +#define ACPI_RSDP_NAME "RSDP" /* * All tables and structures must be byte-packed to match the ACPI @@ -83,27 +83,29 @@ * ******************************************************************************/ -#define ACPI_TABLE_HEADER_DEF \ - char signature[4]; /* ASCII table signature */\ - u32 length; /* Length of table in bytes, including this header */\ - u8 revision; /* ACPI Specification minor version # */\ - u8 checksum; /* To make sum of entire table == 0 */\ - char oem_id[6]; /* ASCII OEM identification */\ - char oem_table_id[8]; /* ASCII OEM table identification */\ - u32 oem_revision; /* OEM revision number */\ - char asl_compiler_id[4]; /* ASCII ASL compiler vendor ID */\ - u32 asl_compiler_revision; /* ASL compiler version */ - struct acpi_table_header { -ACPI_TABLE_HEADER_DEF}; + char signature[ACPI_NAME_SIZE]; /* ASCII table signature */ + u32 length; /* Length of table in bytes, including this header */ + u8 revision; /* ACPI Specification minor version # */ + u8 checksum; /* To make sum of entire table == 0 */ + char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */ + char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */ + u32 oem_revision; /* OEM revision number */ + char asl_compiler_id[ACPI_NAME_SIZE]; /* ASCII ASL compiler vendor ID */ + u32 asl_compiler_revision; /* ASL compiler version */ +}; /* * GAS - Generic Address Structure (ACPI 2.0+) + * + * Note: Since this structure is used in the ACPI tables, it is byte aligned. + * If misalignment is not supported, access to the Address field must be + * performed with care. */ struct acpi_generic_address { - u8 address_space_id; /* Address space where struct or register exists */ - u8 register_bit_width; /* Size in bits of given register */ - u8 register_bit_offset; /* Bit offset within the register */ + u8 space_id; /* Address space where struct or register exists */ + u8 bit_width; /* Size in bits of given register */ + u8 bit_offset; /* Bit offset within the register */ u8 access_width; /* Minimum Access size (ACPI 3.0) */ u64 address; /* 64-bit address of struct or register */ }; @@ -114,10 +116,10 @@ struct acpi_generic_address { * ******************************************************************************/ -struct rsdp_descriptor { +struct acpi_table_rsdp { char signature[8]; /* ACPI signature, contains "RSD PTR " */ u8 checksum; /* ACPI 1.0 checksum */ - char oem_id[6]; /* OEM identification */ + char oem_id[ACPI_OEM_ID_SIZE]; /* OEM identification */ u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */ u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */ u32 length; /* Table length in bytes, including header (ACPI 2.0+) */ @@ -134,12 +136,14 @@ struct rsdp_descriptor { * ******************************************************************************/ -struct rsdt_descriptor { - ACPI_TABLE_HEADER_DEF u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */ +struct acpi_table_rsdt { + struct acpi_table_header header; /* Common ACPI table header */ + u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */ }; -struct xsdt_descriptor { - ACPI_TABLE_HEADER_DEF u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */ +struct acpi_table_xsdt { + struct acpi_table_header header; /* Common ACPI table header */ + u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */ }; /******************************************************************************* @@ -148,36 +152,27 @@ struct xsdt_descriptor { * ******************************************************************************/ -struct facs_descriptor { +struct acpi_table_facs { char signature[4]; /* ASCII table signature */ u32 length; /* Length of structure, in bytes */ u32 hardware_signature; /* Hardware configuration signature */ u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */ u32 global_lock; /* Global Lock for shared hardware resources */ - - /* Flags (32 bits) */ - - u8 S4bios_f:1; /* 00: S4BIOS support is present */ - u8:7; /* 01-07: Reserved, must be zero */ - u8 reserved1[3]; /* 08-31: Reserved, must be zero */ - + u32 flags; u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */ u8 version; /* Version of this table (ACPI 2.0+) */ u8 reserved[31]; /* Reserved, must be zero */ }; +/* Flag macros */ + +#define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */ + +/* Global lock flags */ + #define ACPI_GLOCK_PENDING 0x01 /* 00: Pending global lock ownership */ #define ACPI_GLOCK_OWNED 0x02 /* 01: Global lock is owned */ -/* - * Common FACS - This is a version-independent FACS structure used for internal use only - */ -struct acpi_common_facs { - u32 *global_lock; - u64 *firmware_waking_vector; - u8 vector_width; -}; - /******************************************************************************* * * FADT - Fixed ACPI Description Table (Signature "FACP") @@ -186,121 +181,98 @@ struct acpi_common_facs { /* Fields common to all versions of the FADT */ -#define ACPI_FADT_COMMON \ - ACPI_TABLE_HEADER_DEF \ - u32 V1_firmware_ctrl; /* 32-bit physical address of FACS */ \ - u32 V1_dsdt; /* 32-bit physical address of DSDT */ \ - u8 reserved1; /* System Interrupt Model isn't used in ACPI 2.0*/ \ - u8 prefer_PM_profile; /* Conveys preferred power management profile to OSPM. */ \ - u16 sci_int; /* System vector of SCI interrupt */ \ - u32 smi_cmd; /* Port address of SMI command port */ \ - u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ \ - u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ \ - u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ \ - u8 pstate_cnt; /* Processor performance state control*/ \ - u32 V1_pm1a_evt_blk; /* Port address of Power Mgt 1a Event Reg Blk */ \ - u32 V1_pm1b_evt_blk; /* Port address of Power Mgt 1b Event Reg Blk */ \ - u32 V1_pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ \ - u32 V1_pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ \ - u32 V1_pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ \ - u32 V1_pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ \ - u32 V1_gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ \ - u32 V1_gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ \ - u8 pm1_evt_len; /* Byte Length of ports at pm1_x_evt_blk */ \ - u8 pm1_cnt_len; /* Byte Length of ports at pm1_x_cnt_blk */ \ - u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ \ - u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */ \ - u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ \ - u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ \ - u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ \ - u8 cst_cnt; /* Support for the _CST object and C States change notification.*/ \ - u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ \ - u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ \ - u16 flush_size; /* Processor's memory cache line width, in bytes */ \ - u16 flush_stride; /* Number of flush strides that need to be read */ \ - u8 duty_offset; /* Processor's duty cycle index in processor's P_CNT reg*/ \ - u8 duty_width; /* Processor's duty cycle value bit width in P_CNT register.*/ \ - u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ \ - u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ \ - u8 century; /* Index to century in RTC CMOS RAM */ \ - u16 iapc_boot_arch; /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/ \ - u8 reserved2; /* Reserved, must be zero */ - -/* - * ACPI 2.0+ FADT - */ -struct fadt_descriptor { - ACPI_FADT_COMMON - /* Flags (32 bits) */ - u8 wb_invd:1; /* 00: The wbinvd instruction works properly */ - u8 wb_invd_flush:1; /* 01: The wbinvd flushes but does not invalidate */ - u8 proc_c1:1; /* 02: All processors support C1 state */ - u8 plvl2_up:1; /* 03: C2 state works on MP system */ - u8 pwr_button:1; /* 04: Power button is handled as a generic feature */ - u8 sleep_button:1; /* 05: Sleep button is handled as a generic feature, or not present */ - u8 fixed_rTC:1; /* 06: RTC wakeup stat not in fixed register space */ - u8 rtcs4:1; /* 07: RTC wakeup stat not possible from S4 */ - u8 tmr_val_ext:1; /* 08: tmr_val is 32 bits 0=24-bits */ - u8 dock_cap:1; /* 09: Docking supported */ - u8 reset_reg_sup:1; /* 10: System reset via the FADT RESET_REG supported */ - u8 sealed_case:1; /* 11: No internal expansion capabilities and case is sealed */ - u8 headless:1; /* 12: No local video capabilities or local input devices */ - u8 cpu_sw_sleep:1; /* 13: Must execute native instruction after writing SLP_TYPx register */ - - u8 pci_exp_wak:1; /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ - u8 use_platform_clock:1; /* 15: OSPM should use platform-provided timer (ACPI 3.0) */ - u8 S4rtc_sts_valid:1; /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ - u8 remote_power_on_capable:1; /* 17: System is compatible with remote power on (ACPI 3.0) */ - u8 force_apic_cluster_model:1; /* 18: All local APICs must use cluster model (ACPI 3.0) */ - u8 force_apic_physical_destination_mode:1; /* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) */ - u8:4; /* 20-23: Reserved, must be zero */ - u8 reserved3; /* 24-31: Reserved, must be zero */ - +struct acpi_table_fadt { + struct acpi_table_header header; /* Common ACPI table header */ + u32 facs; /* 32-bit physical address of FACS */ + u32 dsdt; /* 32-bit physical address of DSDT */ + u8 model; /* System Interrupt Model (ACPI 1.0) not used in ACPI 2.0+ */ + u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */ + u16 sci_interrupt; /* System vector of SCI interrupt */ + u32 smi_command; /* Port address of SMI command port */ + u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ + u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ + u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */ + u8 pstate_control; /* Processor performance state control */ + u32 pm1a_event_block; /* Port address of Power Mgt 1a Event Reg Blk */ + u32 pm1b_event_block; /* Port address of Power Mgt 1b Event Reg Blk */ + u32 pm1a_control_block; /* Port address of Power Mgt 1a Control Reg Blk */ + u32 pm1b_control_block; /* Port address of Power Mgt 1b Control Reg Blk */ + u32 pm2_control_block; /* Port address of Power Mgt 2 Control Reg Blk */ + u32 pm_timer_block; /* Port address of Power Mgt Timer Ctrl Reg Blk */ + u32 gpe0_block; /* Port addr of General Purpose acpi_event 0 Reg Blk */ + u32 gpe1_block; /* Port addr of General Purpose acpi_event 1 Reg Blk */ + u8 pm1_event_length; /* Byte Length of ports at pm1_x_evt_blk */ + u8 pm1_control_length; /* Byte Length of ports at pm1_x_cnt_blk */ + u8 pm2_control_length; /* Byte Length of ports at pm2_cnt_blk */ + u8 pm_timer_length; /* Byte Length of ports at pm_tmr_blk */ + u8 gpe0_block_length; /* Byte Length of ports at gpe0_blk */ + u8 gpe1_block_length; /* Byte Length of ports at gpe1_blk */ + u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ + u8 cst_control; /* Support for the _CST object and C States change notification. */ + u16 C2latency; /* Worst case HW latency to enter/exit C2 state */ + u16 C3latency; /* Worst case HW latency to enter/exit C3 state */ + u16 flush_size; /* Processor's memory cache line width, in bytes */ + u16 flush_stride; /* Number of flush strides that need to be read */ + u8 duty_offset; /* Processor's duty cycle index in processor's P_CNT reg */ + u8 duty_width; /* Processor's duty cycle value bit width in P_CNT register. */ + u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */ + u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */ + u8 century; /* Index to century in RTC CMOS RAM */ + u16 boot_flags; /* IA-PC Boot Architecture Flags. See Table 5-10 for description */ + u8 reserved; /* Reserved, must be zero */ + u32 flags; /* Miscellaneous flag bits */ struct acpi_generic_address reset_register; /* Reset register address in GAS format */ u8 reset_value; /* Value to write to the reset_register port to reset the system */ u8 reserved4[3]; /* These three bytes must be zero */ - u64 xfirmware_ctrl; /* 64-bit physical address of FACS */ + u64 Xfacs; /* 64-bit physical address of FACS */ u64 Xdsdt; /* 64-bit physical address of DSDT */ - struct acpi_generic_address xpm1a_evt_blk; /* Extended Power Mgt 1a acpi_event Reg Blk address */ - struct acpi_generic_address xpm1b_evt_blk; /* Extended Power Mgt 1b acpi_event Reg Blk address */ - struct acpi_generic_address xpm1a_cnt_blk; /* Extended Power Mgt 1a Control Reg Blk address */ - struct acpi_generic_address xpm1b_cnt_blk; /* Extended Power Mgt 1b Control Reg Blk address */ - struct acpi_generic_address xpm2_cnt_blk; /* Extended Power Mgt 2 Control Reg Blk address */ - struct acpi_generic_address xpm_tmr_blk; /* Extended Power Mgt Timer Ctrl Reg Blk address */ - struct acpi_generic_address xgpe0_blk; /* Extended General Purpose acpi_event 0 Reg Blk address */ - struct acpi_generic_address xgpe1_blk; /* Extended General Purpose acpi_event 1 Reg Blk address */ + struct acpi_generic_address xpm1a_event_block; /* Extended Power Mgt 1a acpi_event Reg Blk address */ + struct acpi_generic_address xpm1b_event_block; /* Extended Power Mgt 1b acpi_event Reg Blk address */ + struct acpi_generic_address xpm1a_control_block; /* Extended Power Mgt 1a Control Reg Blk address */ + struct acpi_generic_address xpm1b_control_block; /* Extended Power Mgt 1b Control Reg Blk address */ + struct acpi_generic_address xpm2_control_block; /* Extended Power Mgt 2 Control Reg Blk address */ + struct acpi_generic_address xpm_timer_block; /* Extended Power Mgt Timer Ctrl Reg Blk address */ + struct acpi_generic_address xgpe0_block; /* Extended General Purpose acpi_event 0 Reg Blk address */ + struct acpi_generic_address xgpe1_block; /* Extended General Purpose acpi_event 1 Reg Blk address */ }; -/* - * "Down-revved" ACPI 2.0 FADT descriptor - * Defined here to allow compiler to generate the length of the struct - */ -struct fadt_descriptor_rev2_minus { - ACPI_FADT_COMMON u32 flags; - struct acpi_generic_address reset_register; /* Reset register address in GAS format */ - u8 reset_value; /* Value to write to the reset_register port to reset the system. */ - u8 reserved7[3]; /* Reserved, must be zero */ -}; +/* FADT flags */ + +#define ACPI_FADT_WBINVD (1) /* 00: The wbinvd instruction works properly */ +#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: The wbinvd flushes but does not invalidate */ +#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: All processors support C1 state */ +#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: C2 state works on MP system */ +#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: Power button is handled as a generic feature */ +#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: Sleep button is handled as a generic feature, or not present */ +#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: RTC wakeup stat not in fixed register space */ +#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup stat not possible from S4 */ +#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: tmr_val is 32 bits 0=24-bits */ +#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: Docking supported */ +#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: System reset via the FADT RESET_REG supported */ +#define ACPI_FADT_SEALED_CASE (1<<11) /* 11: No internal expansion capabilities and case is sealed */ +#define ACPI_FADT_HEADLESS (1<<12) /* 12: No local video capabilities or local input devices */ +#define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: Must execute native instruction after writing SLP_TYPx register */ +#define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ +#define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: OSPM should use platform-provided timer (ACPI 3.0) */ +#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ +#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: System is compatible with remote power on (ACPI 3.0) */ +#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: All local APICs must use cluster model (ACPI 3.0) */ +#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) */ /* - * ACPI 1.0 FADT - * Defined here to allow compiler to generate the length of the struct + * FADT Prefered Power Management Profiles */ -struct fadt_descriptor_rev1 { - ACPI_FADT_COMMON u32 flags; +enum acpi_prefered_pm_profiles { + PM_UNSPECIFIED = 0, + PM_DESKTOP = 1, + PM_MOBILE = 2, + PM_WORKSTATION = 3, + PM_ENTERPRISE_SERVER = 4, + PM_SOHO_SERVER = 5, + PM_APPLIANCE_PC = 6 }; -/* FADT: Prefered Power Management Profiles */ - -#define PM_UNSPECIFIED 0 -#define PM_DESKTOP 1 -#define PM_MOBILE 2 -#define PM_WORKSTATION 3 -#define PM_ENTERPRISE_SERVER 4 -#define PM_SOHO_SERVER 5 -#define PM_APPLIANCE_PC 6 - -/* FADT: Boot Arch Flags */ +/* FADT Boot Arch Flags */ #define BAF_LEGACY_DEVICES 0x0001 #define BAF_8042_KEYBOARD_CONTROLLER 0x0002 @@ -312,59 +284,11 @@ struct fadt_descriptor_rev1 { #pragma pack() -/* - * This macro is temporary until the table bitfield flag definitions - * are removed and replaced by a Flags field. - */ -#define ACPI_FLAG_OFFSET(d,f,o) (u8) (ACPI_OFFSET (d,f) + \ - sizeof(((d *)0)->f) + o) -/* - * Get the remaining ACPI tables - */ -#include "actbl1.h" +#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_fadt, f) /* - * ACPI Table information. We save the table address, length, - * and type of memory allocation (mapped or allocated) for each - * table for 1) when we exit, and 2) if a new table is installed + * Get the remaining ACPI tables */ -#define ACPI_MEM_NOT_ALLOCATED 0 -#define ACPI_MEM_ALLOCATED 1 -#define ACPI_MEM_MAPPED 2 - -/* Definitions for the Flags bitfield member of struct acpi_table_support */ - -#define ACPI_TABLE_SINGLE 0x00 -#define ACPI_TABLE_MULTIPLE 0x01 -#define ACPI_TABLE_EXECUTABLE 0x02 - -#define ACPI_TABLE_ROOT 0x00 -#define ACPI_TABLE_PRIMARY 0x10 -#define ACPI_TABLE_SECONDARY 0x20 -#define ACPI_TABLE_ALL 0x30 -#define ACPI_TABLE_TYPE_MASK 0x30 - -/* Data about each known table type */ - -struct acpi_table_support { - char *name; - char *signature; - void **global_ptr; - u8 sig_length; - u8 flags; -}; - -extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1, - * needed for certain workarounds */ -/* Macros used to generate offsets to specific table fields */ - -#define ACPI_FACS_OFFSET(f) (u8) ACPI_OFFSET (struct facs_descriptor,f) -#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct fadt_descriptor, f) -#define ACPI_GAS_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_generic_address,f) -#define ACPI_HDR_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_header,f) -#define ACPI_RSDP_OFFSET(f) (u8) ACPI_OFFSET (struct rsdp_descriptor,f) - -#define ACPI_FADT_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct fadt_descriptor,f,o) -#define ACPI_FACS_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct facs_descriptor,f,o) +#include #endif /* __ACTBL_H__ */ diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 745a6445a4f..8ae30b7ed65 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -73,12 +73,6 @@ #define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */ #define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */ -/* Legacy names */ - -#define APIC_SIG "APIC" /* Multiple APIC Description Table */ -#define BOOT_SIG "BOOT" /* Simple Boot Flag Table */ -#define SBST_SIG "SBST" /* Smart Battery Specification Table */ - /* * All tables must be byte-packed to match the ACPI specification, since * the tables are provided by the system BIOS. @@ -91,6 +85,13 @@ * portable, so do not use any other bitfield types. */ +/* Common Sub-table header (used in MADT, SRAT, etc.) */ + +struct acpi_subtable_header { + u8 type; + u8 length; +}; + /******************************************************************************* * * ASF - Alert Standard Format table (Signature "ASF!") @@ -98,24 +99,27 @@ ******************************************************************************/ struct acpi_table_asf { -ACPI_TABLE_HEADER_DEF}; + struct acpi_table_header header; /* Common ACPI table header */ +}; -#define ACPI_ASF_HEADER_DEF \ - u8 type; \ - u8 reserved; \ - u16 length; +/* ASF subtable header */ struct acpi_asf_header { -ACPI_ASF_HEADER_DEF}; + u8 type; + u8 reserved; + u16 length; +}; -/* Values for Type field */ +/* Values for Type field above */ -#define ASF_INFO 0 -#define ASF_ALERT 1 -#define ASF_CONTROL 2 -#define ASF_BOOT 3 -#define ASF_ADDRESS 4 -#define ASF_RESERVED 5 +enum acpi_asf_type { + ACPI_ASF_TYPE_INFO = 0, + ACPI_ASF_TYPE_ALERT = 1, + ACPI_ASF_TYPE_CONTROL = 2, + ACPI_ASF_TYPE_BOOT = 3, + ACPI_ASF_TYPE_ADDRESS = 4, + ACPI_ASF_TYPE_RESERVED = 5 +}; /* * ASF subtables @@ -124,7 +128,8 @@ ACPI_ASF_HEADER_DEF}; /* 0: ASF Information */ struct acpi_asf_info { - ACPI_ASF_HEADER_DEF u8 min_reset_value; + struct acpi_asf_header header; + u8 min_reset_value; u8 min_poll_interval; u16 system_id; u32 mfg_id; @@ -135,7 +140,8 @@ struct acpi_asf_info { /* 1: ASF Alerts */ struct acpi_asf_alert { - ACPI_ASF_HEADER_DEF u8 assert_mask; + struct acpi_asf_header header; + u8 assert_mask; u8 deassert_mask; u8 alerts; u8 data_length; @@ -145,7 +151,8 @@ struct acpi_asf_alert { /* 2: ASF Remote Control */ struct acpi_asf_remote { - ACPI_ASF_HEADER_DEF u8 controls; + struct acpi_asf_header header; + u8 controls; u8 data_length; u16 reserved2; u8 array[1]; @@ -154,7 +161,8 @@ struct acpi_asf_remote { /* 3: ASF RMCP Boot Options */ struct acpi_asf_rmcp { - ACPI_ASF_HEADER_DEF u8 capabilities[7]; + struct acpi_asf_header header; + u8 capabilities[7]; u8 completion_code; u32 enterprise_id; u8 command; @@ -166,7 +174,8 @@ struct acpi_asf_rmcp { /* 4: ASF Address */ struct acpi_asf_address { - ACPI_ASF_HEADER_DEF u8 eprom_address; + struct acpi_asf_header header; + u8 eprom_address; u8 devices; u8 smbus_addresses[1]; }; @@ -178,7 +187,8 @@ struct acpi_asf_address { ******************************************************************************/ struct acpi_table_boot { - ACPI_TABLE_HEADER_DEF u8 cmos_index; /* Index in CMOS RAM for the boot register */ + struct acpi_table_header header; /* Common ACPI table header */ + u8 cmos_index; /* Index in CMOS RAM for the boot register */ u8 reserved[3]; }; @@ -189,7 +199,8 @@ struct acpi_table_boot { ******************************************************************************/ struct acpi_table_cpep { - ACPI_TABLE_HEADER_DEF u64 reserved; + struct acpi_table_header header; /* Common ACPI table header */ + u64 reserved; }; /* Subtable */ @@ -197,9 +208,9 @@ struct acpi_table_cpep { struct acpi_cpep_polling { u8 type; u8 length; - u8 processor_id; /* Processor ID */ - u8 processor_eid; /* Processor EID */ - u32 polling_interval; /* Polling interval (msec) */ + u8 id; /* Processor ID */ + u8 eid; /* Processor EID */ + u32 interval; /* Polling interval (msec) */ }; /******************************************************************************* @@ -209,7 +220,8 @@ struct acpi_cpep_polling { ******************************************************************************/ struct acpi_table_dbgp { - ACPI_TABLE_HEADER_DEF u8 interface_type; /* 0=full 16550, 1=subset of 16550 */ + struct acpi_table_header header; /* Common ACPI table header */ + u8 type; /* 0=full 16550, 1=subset of 16550 */ u8 reserved[3]; struct acpi_generic_address debug_port; }; @@ -220,12 +232,13 @@ struct acpi_table_dbgp { * ******************************************************************************/ -struct ec_boot_resources { - ACPI_TABLE_HEADER_DEF struct acpi_generic_address ec_control; /* Address of EC command/status register */ - struct acpi_generic_address ec_data; /* Address of EC data register */ +struct acpi_table_ecdt { + struct acpi_table_header header; /* Common ACPI table header */ + struct acpi_generic_address control; /* Address of EC command/status register */ + struct acpi_generic_address data; /* Address of EC data register */ u32 uid; /* Unique ID - must be same as the EC _UID method */ - u8 gpe_bit; /* The GPE for the EC */ - u8 ec_id[1]; /* Full namepath of the EC in the ACPI namespace */ + u8 gpe; /* The GPE for the EC */ + u8 id[1]; /* Full namepath of the EC in the ACPI namespace */ }; /******************************************************************************* @@ -234,22 +247,22 @@ struct ec_boot_resources { * ******************************************************************************/ -struct acpi_hpet_table { - ACPI_TABLE_HEADER_DEF u32 hardware_id; /* Hardware ID of event timer block */ - struct acpi_generic_address base_address; /* Address of event timer block */ - u8 hpet_number; /* HPET sequence number */ - u16 clock_tick; /* Main counter min tick, periodic mode */ - u8 attributes; +struct acpi_table_hpet { + struct acpi_table_header header; /* Common ACPI table header */ + u32 id; /* Hardware ID of event timer block */ + struct acpi_generic_address address; /* Address of event timer block */ + u8 sequence; /* HPET sequence number */ + u16 minimum_tick; /* Main counter min tick, periodic mode */ + u8 flags; }; -#if 0 /* HPET flags to be converted to macros */ -struct { /* Flags (8 bits) */ - u8 page_protect:1; /* 00: No page protection */ - u8 page_protect4:1; /* 01: 4_kB page protected */ - u8 page_protect64:1; /* 02: 64_kB page protected */ - u8:5; /* 03-07: Reserved, must be zero */ -} flags; -#endif +/*! Flags */ + +#define ACPI_HPET_PAGE_PROTECT (1) /* 00: No page protection */ +#define ACPI_HPET_PAGE_PROTECT_4 (1<<1) /* 01: 4KB page protected */ +#define ACPI_HPET_PAGE_PROTECT_64 (1<<2) /* 02: 64KB page protected */ + +/*! [End] no source code translation !*/ /******************************************************************************* * @@ -257,148 +270,159 @@ struct { /* Flags (8 bits) */ * ******************************************************************************/ -struct multiple_apic_table { - ACPI_TABLE_HEADER_DEF u32 local_apic_address; /* Physical address of local APIC */ - - /* Flags (32 bits) */ - - u8 PCATcompat:1; /* 00: System also has dual 8259s */ - u8:7; /* 01-07: Reserved, must be zero */ - u8 reserved1[3]; /* 08-31: Reserved, must be zero */ +struct acpi_table_madt { + struct acpi_table_header header; /* Common ACPI table header */ + u32 address; /* Physical address of local APIC */ + u32 flags; }; -/* Values for MADT PCATCompat */ - -#define DUAL_PIC 0 -#define MULTIPLE_APIC 1 - -/* Common MADT Sub-table header */ - -#define APIC_HEADER_DEF \ - u8 type; \ - u8 length; - -struct apic_header { -APIC_HEADER_DEF}; - -/* Values for Type in struct apic_header */ +/* Flags */ -#define APIC_PROCESSOR 0 -#define APIC_IO 1 -#define APIC_XRUPT_OVERRIDE 2 -#define APIC_NMI 3 -#define APIC_LOCAL_NMI 4 -#define APIC_ADDRESS_OVERRIDE 5 -#define APIC_IO_SAPIC 6 -#define APIC_LOCAL_SAPIC 7 -#define APIC_XRUPT_SOURCE 8 -#define APIC_RESERVED 9 /* 9 and greater are reserved */ +#define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */ -/* Flag definitions for MADT sub-tables */ +/* Values for PCATCompat flag */ -#define ACPI_MADT_IFLAGS /* INTI flags (16 bits) */ \ - u8 polarity : 2; /* 00-01: Polarity of APIC I/O input signals */\ - u8 trigger_mode : 2; /* 02-03: Trigger mode of APIC input signals */\ - u8 : 4; /* 04-07: Reserved, must be zero */\ - u8 reserved1; /* 08-15: Reserved, must be zero */ +#define ACPI_MADT_DUAL_PIC 0 +#define ACPI_MADT_MULTIPLE_APIC 1 -#define ACPI_MADT_LFLAGS /* Local Sapic flags (32 bits) */ \ - u8 processor_enabled: 1; /* 00: Processor is usable if set */\ - u8 : 7; /* 01-07: Reserved, must be zero */\ - u8 reserved2[3]; /* 08-31: Reserved, must be zero */ +/* Values for subtable type in struct acpi_subtable_header */ -/* Values for MPS INTI flags */ - -#define POLARITY_CONFORMS 0 -#define POLARITY_ACTIVE_HIGH 1 -#define POLARITY_RESERVED 2 -#define POLARITY_ACTIVE_LOW 3 - -#define TRIGGER_CONFORMS 0 -#define TRIGGER_EDGE 1 -#define TRIGGER_RESERVED 2 -#define TRIGGER_LEVEL 3 +enum acpi_madt_type { + ACPI_MADT_TYPE_LOCAL_APIC = 0, + ACPI_MADT_TYPE_IO_APIC = 1, + ACPI_MADT_TYPE_INTERRUPT_OVERRIDE = 2, + ACPI_MADT_TYPE_NMI_SOURCE = 3, + ACPI_MADT_TYPE_LOCAL_APIC_NMI = 4, + ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE = 5, + ACPI_MADT_TYPE_IO_SAPIC = 6, + ACPI_MADT_TYPE_LOCAL_SAPIC = 7, + ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8, + ACPI_MADT_TYPE_RESERVED = 9 /* 9 and greater are reserved */ +}; /* - * MADT Sub-tables, correspond to Type in struct apic_header + * MADT Sub-tables, correspond to Type in struct acpi_subtable_header */ -/* 0: processor APIC */ +/* 0: Processor Local APIC */ -struct madt_processor_apic { - APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ - u8 local_apic_id; /* Processor's local APIC id */ - ACPI_MADT_LFLAGS}; +struct acpi_madt_local_apic { + struct acpi_subtable_header header; + u8 processor_id; /* ACPI processor id */ + u8 id; /* Processor's local APIC id */ + u32 lapic_flags; +}; /* 1: IO APIC */ -struct madt_io_apic { - APIC_HEADER_DEF u8 io_apic_id; /* I/O APIC ID */ +struct acpi_madt_io_apic { + struct acpi_subtable_header header; + u8 id; /* I/O APIC ID */ u8 reserved; /* Reserved - must be zero */ u32 address; /* APIC physical address */ - u32 interrupt; /* Global system interrupt where INTI lines start */ + u32 global_irq_base; /* Global system interrupt where INTI lines start */ }; /* 2: Interrupt Override */ -struct madt_interrupt_override { - APIC_HEADER_DEF u8 bus; /* 0 - ISA */ - u8 source; /* Interrupt source (IRQ) */ - u32 interrupt; /* Global system interrupt */ - ACPI_MADT_IFLAGS}; +struct acpi_madt_interrupt_override { + struct acpi_subtable_header header; + u8 bus; /* 0 - ISA */ + u8 source_irq; /* Interrupt source (IRQ) */ + u32 global_irq; /* Global system interrupt */ + u16 inti_flags; +}; -/* 3: NMI Sources */ +/* 3: NMI Source */ -struct madt_nmi_source { - APIC_HEADER_DEF ACPI_MADT_IFLAGS u32 interrupt; /* Global system interrupt */ +struct acpi_madt_nmi_source { + struct acpi_subtable_header header; + u16 inti_flags; + u32 global_irq; /* Global system interrupt */ }; /* 4: Local APIC NMI */ -struct madt_local_apic_nmi { - APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ - ACPI_MADT_IFLAGS u8 lint; /* LINTn to which NMI is connected */ +struct acpi_madt_local_apic_nmi { + struct acpi_subtable_header header; + u8 processor_id; /* ACPI processor id */ + u16 inti_flags; + u8 lint; /* LINTn to which NMI is connected */ }; /* 5: Address Override */ -struct madt_address_override { - APIC_HEADER_DEF u16 reserved; /* Reserved, must be zero */ +struct acpi_madt_local_apic_override { + struct acpi_subtable_header header; + u16 reserved; /* Reserved, must be zero */ u64 address; /* APIC physical address */ }; /* 6: I/O Sapic */ -struct madt_io_sapic { - APIC_HEADER_DEF u8 io_sapic_id; /* I/O SAPIC ID */ +struct acpi_madt_io_sapic { + struct acpi_subtable_header header; + u8 id; /* I/O SAPIC ID */ u8 reserved; /* Reserved, must be zero */ - u32 interrupt_base; /* Glocal interrupt for SAPIC start */ + u32 global_irq_base; /* Global interrupt for SAPIC start */ u64 address; /* SAPIC physical address */ }; /* 7: Local Sapic */ -struct madt_local_sapic { - APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ - u8 local_sapic_id; /* SAPIC ID */ - u8 local_sapic_eid; /* SAPIC EID */ +struct acpi_madt_local_sapic { + struct acpi_subtable_header header; + u8 processor_id; /* ACPI processor id */ + u8 id; /* SAPIC ID */ + u8 eid; /* SAPIC EID */ u8 reserved[3]; /* Reserved, must be zero */ - ACPI_MADT_LFLAGS u32 processor_uID; /* Numeric UID - ACPI 3.0 */ - char processor_uIDstring[1]; /* String UID - ACPI 3.0 */ + u32 lapic_flags; + u32 uid; /* Numeric UID - ACPI 3.0 */ + char uid_string[1]; /* String UID - ACPI 3.0 */ }; /* 8: Platform Interrupt Source */ -struct madt_interrupt_source { - APIC_HEADER_DEF ACPI_MADT_IFLAGS u8 interrupt_type; /* 1=PMI, 2=INIT, 3=corrected */ - u8 processor_id; /* Processor ID */ - u8 processor_eid; /* Processor EID */ +struct acpi_madt_interrupt_source { + struct acpi_subtable_header header; + u16 inti_flags; + u8 type; /* 1=PMI, 2=INIT, 3=corrected */ + u8 id; /* Processor ID */ + u8 eid; /* Processor EID */ u8 io_sapic_vector; /* Vector value for PMI interrupts */ - u32 interrupt; /* Global system interrupt */ + u32 global_irq; /* Global system interrupt */ u32 flags; /* Interrupt Source Flags */ }; -#ifdef DUPLICATE_DEFINITION_WITH_LINUX_ACPI_H +/* Flags field above */ + +#define ACPI_MADT_CPEI_OVERRIDE (1) + +/* + * Common flags fields for MADT subtables + */ + +/* MADT Local APIC flags (lapic_flags) */ + +#define ACPI_MADT_ENABLED (1) /* 00: Processor is usable if set */ + +/* MADT MPS INTI flags (inti_flags) */ + +#define ACPI_MADT_POLARITY_MASK (3) /* 00-01: Polarity of APIC I/O input signals */ +#define ACPI_MADT_TRIGGER_MASK (3<<2) /* 02-03: Trigger mode of APIC input signals */ + +/* Values for MPS INTI flags */ + +#define ACPI_MADT_POLARITY_CONFORMS 0 +#define ACPI_MADT_POLARITY_ACTIVE_HIGH 1 +#define ACPI_MADT_POLARITY_RESERVED 2 +#define ACPI_MADT_POLARITY_ACTIVE_LOW 3 + +#define ACPI_MADT_TRIGGER_CONFORMS (0) +#define ACPI_MADT_TRIGGER_EDGE (1<<2) +#define ACPI_MADT_TRIGGER_RESERVED (2<<2) +#define ACPI_MADT_TRIGGER_LEVEL (3<<2) + /******************************************************************************* * * MCFG - PCI Memory Mapped Configuration table and sub-table @@ -406,17 +430,19 @@ struct madt_interrupt_source { ******************************************************************************/ struct acpi_table_mcfg { - ACPI_TABLE_HEADER_DEF u8 reserved[8]; + struct acpi_table_header header; /* Common ACPI table header */ + u8 reserved[8]; }; +/* Subtable */ + struct acpi_mcfg_allocation { - u64 base_address; /* Base address, processor-relative */ + u64 address; /* Base address, processor-relative */ u16 pci_segment; /* PCI segment group number */ u8 start_bus_number; /* Starting PCI Bus number */ u8 end_bus_number; /* Final PCI Bus number */ u32 reserved; }; -#endif /******************************************************************************* * @@ -424,8 +450,9 @@ struct acpi_mcfg_allocation { * ******************************************************************************/ -struct smart_battery_table { - ACPI_TABLE_HEADER_DEF u32 warning_level; +struct acpi_table_sbst { + struct acpi_table_header header; /* Common ACPI table header */ + u32 warning_level; u32 low_level; u32 critical_level; }; @@ -436,9 +463,10 @@ struct smart_battery_table { * ******************************************************************************/ -struct system_locality_info { - ACPI_TABLE_HEADER_DEF u64 locality_count; - u8 entry[1][1]; +struct acpi_table_slit { + struct acpi_table_header header; /* Common ACPI table header */ + u64 locality_count; + u8 entry[1]; /* Real size = localities^2 */ }; /******************************************************************************* @@ -448,7 +476,8 @@ struct system_locality_info { ******************************************************************************/ struct acpi_table_spcr { - ACPI_TABLE_HEADER_DEF u8 interface_type; /* 0=full 16550, 1=subset of 16550 */ + struct acpi_table_header header; /* Common ACPI table header */ + u8 interface_type; /* 0=full 16550, 1=subset of 16550 */ u8 reserved[3]; struct acpi_generic_address serial_port; u8 interrupt_type; @@ -459,7 +488,7 @@ struct acpi_table_spcr { u8 stop_bits; u8 flow_control; u8 terminal_type; - u8 reserved2; + u8 reserved1; u16 pci_device_id; u16 pci_vendor_id; u8 pci_bus; @@ -467,7 +496,7 @@ struct acpi_table_spcr { u8 pci_function; u32 pci_flags; u8 pci_segment; - u32 reserved3; + u32 reserved2; }; /******************************************************************************* @@ -477,12 +506,13 @@ struct acpi_table_spcr { ******************************************************************************/ struct acpi_table_spmi { - ACPI_TABLE_HEADER_DEF u8 reserved; + struct acpi_table_header header; /* Common ACPI table header */ + u8 reserved; u8 interface_type; u16 spec_revision; /* Version of IPMI */ u8 interrupt_type; u8 gpe_number; /* GPE assigned */ - u8 reserved2; + u8 reserved1; u8 pci_device_flag; u32 interrupt; struct acpi_generic_address ipmi_register; @@ -498,56 +528,61 @@ struct acpi_table_spmi { * ******************************************************************************/ -struct system_resource_affinity { - ACPI_TABLE_HEADER_DEF u32 reserved1; /* Must be value '1' */ - u64 reserved2; /* Reserved, must be zero */ +struct acpi_table_srat { + struct acpi_table_header header; /* Common ACPI table header */ + u32 table_revision; /* Must be value '1' */ + u64 reserved; /* Reserved, must be zero */ }; -/* SRAT common sub-table header */ - -#define SRAT_SUBTABLE_HEADER \ - u8 type; \ - u8 length; - -/* Values for Type above */ +/* Values for subtable type in struct acpi_subtable_header */ -#define SRAT_CPU_AFFINITY 0 -#define SRAT_MEMORY_AFFINITY 1 -#define SRAT_RESERVED 2 +enum acpi_srat_type { + ACPI_SRAT_TYPE_CPU_AFFINITY = 0, + ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1, + ACPI_SRAT_TYPE_RESERVED = 2 +}; /* SRAT sub-tables */ -struct static_resource_alloc { - SRAT_SUBTABLE_HEADER u8 proximity_domain_lo; +struct acpi_srat_cpu_affinity { + struct acpi_subtable_header header; + u8 proximity_domain_lo; u8 apic_id; - - /* Flags (32 bits) */ - - u8 enabled:1; /* 00: Use affinity structure */ - u8:7; /* 01-07: Reserved, must be zero */ - u8 reserved3[3]; /* 08-31: Reserved, must be zero */ - + u32 flags; u8 local_sapic_eid; u8 proximity_domain_hi[3]; - u32 reserved4; /* Reserved, must be zero */ + u32 reserved; /* Reserved, must be zero */ }; -struct memory_affinity { - SRAT_SUBTABLE_HEADER u32 proximity_domain; - u16 reserved3; +/* Flags */ + +#define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */ + +struct acpi_srat_mem_affinity { + struct acpi_subtable_header header; + u32 proximity_domain; + u16 reserved; /* Reserved, must be zero */ u64 base_address; - u64 address_length; - u32 reserved4; + u64 length; + u32 memory_type; /* See acpi_address_range_id */ + u32 flags; + u64 reserved1; /* Reserved, must be zero */ +}; + +/* Flags */ - /* Flags (32 bits) */ +#define ACPI_SRAT_MEM_ENABLED (1) /* 00: Use affinity structure */ +#define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */ +#define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */ - u8 enabled:1; /* 00: Use affinity structure */ - u8 hot_pluggable:1; /* 01: Memory region is hot pluggable */ - u8 non_volatile:1; /* 02: Memory is non-volatile */ - u8:5; /* 03-07: Reserved, must be zero */ - u8 reserved5[3]; /* 08-31: Reserved, must be zero */ +/* Memory types */ - u64 reserved6; /* Reserved, must be zero */ +enum acpi_address_range_id { + ACPI_ADDRESS_RANGE_MEMORY = 1, + ACPI_ADDRESS_RANGE_RESERVED = 2, + ACPI_ADDRESS_RANGE_ACPI = 3, + ACPI_ADDRESS_RANGE_NVS = 4, + ACPI_ADDRESS_RANGE_COUNT = 5 }; /******************************************************************************* @@ -557,7 +592,8 @@ struct memory_affinity { ******************************************************************************/ struct acpi_table_tcpa { - ACPI_TABLE_HEADER_DEF u16 reserved; + struct acpi_table_header header; /* Common ACPI table header */ + u16 reserved; u32 max_log_length; /* Maximum length for the event log area */ u64 log_address; /* Address of the event log area */ }; @@ -569,7 +605,8 @@ struct acpi_table_tcpa { ******************************************************************************/ struct acpi_table_wdrt { - ACPI_TABLE_HEADER_DEF u32 header_length; /* Watchdog Header Length */ + struct acpi_table_header header; /* Common ACPI table header */ + u32 header_length; /* Watchdog Header Length */ u8 pci_segment; /* PCI Segment number */ u8 pci_bus; /* PCI Bus number */ u8 pci_device; /* PCI Device number */ @@ -582,58 +619,9 @@ struct acpi_table_wdrt { u32 entries; /* Number of watchdog entries that follow */ }; -#if 0 /* Flags, will be converted to macros */ -u8 enabled:1; /* 00: Timer enabled */ -u8:6; /* 01-06: Reserved */ -u8 sleep_stop:1; /* 07: Timer stopped in sleep state */ -#endif - -/* Macros used to generate offsets to specific table fields */ - -#define ACPI_ASF0_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_info,f) -#define ACPI_ASF1_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_alert,f) -#define ACPI_ASF2_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_remote,f) -#define ACPI_ASF3_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_rmcp,f) -#define ACPI_ASF4_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_address,f) -#define ACPI_BOOT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_boot,f) -#define ACPI_CPEP_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_cpep,f) -#define ACPI_CPEP0_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_cpep_polling,f) -#define ACPI_DBGP_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_dbgp,f) -#define ACPI_ECDT_OFFSET(f) (u8) ACPI_OFFSET (struct ec_boot_resources,f) -#define ACPI_HPET_OFFSET(f) (u8) ACPI_OFFSET (struct hpet_table,f) -#define ACPI_MADT_OFFSET(f) (u8) ACPI_OFFSET (struct multiple_apic_table,f) -#define ACPI_MADT0_OFFSET(f) (u8) ACPI_OFFSET (struct madt_processor_apic,f) -#define ACPI_MADT1_OFFSET(f) (u8) ACPI_OFFSET (struct madt_io_apic,f) -#define ACPI_MADT2_OFFSET(f) (u8) ACPI_OFFSET (struct madt_interrupt_override,f) -#define ACPI_MADT3_OFFSET(f) (u8) ACPI_OFFSET (struct madt_nmi_source,f) -#define ACPI_MADT4_OFFSET(f) (u8) ACPI_OFFSET (struct madt_local_apic_nmi,f) -#define ACPI_MADT5_OFFSET(f) (u8) ACPI_OFFSET (struct madt_address_override,f) -#define ACPI_MADT6_OFFSET(f) (u8) ACPI_OFFSET (struct madt_io_sapic,f) -#define ACPI_MADT7_OFFSET(f) (u8) ACPI_OFFSET (struct madt_local_sapic,f) -#define ACPI_MADT8_OFFSET(f) (u8) ACPI_OFFSET (struct madt_interrupt_source,f) -#define ACPI_MADTH_OFFSET(f) (u8) ACPI_OFFSET (struct apic_header,f) -#define ACPI_MCFG_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_mcfg,f) -#define ACPI_MCFG0_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_mcfg_allocation,f) -#define ACPI_SBST_OFFSET(f) (u8) ACPI_OFFSET (struct smart_battery_table,f) -#define ACPI_SLIT_OFFSET(f) (u8) ACPI_OFFSET (struct system_locality_info,f) -#define ACPI_SPCR_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_spcr,f) -#define ACPI_SPMI_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_spmi,f) -#define ACPI_SRAT_OFFSET(f) (u8) ACPI_OFFSET (struct system_resource_affinity,f) -#define ACPI_SRAT0_OFFSET(f) (u8) ACPI_OFFSET (struct static_resource_alloc,f) -#define ACPI_SRAT1_OFFSET(f) (u8) ACPI_OFFSET (struct memory_affinity,f) -#define ACPI_TCPA_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_tcpa,f) -#define ACPI_WDRT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_wdrt,f) - -#define ACPI_HPET_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct hpet_table,f,o) -#define ACPI_SRAT0_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct static_resource_alloc,f,o) -#define ACPI_SRAT1_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct memory_affinity,f,o) -#define ACPI_MADT_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct multiple_apic_table,f,o) -#define ACPI_MADT0_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_processor_apic,f,o) -#define ACPI_MADT2_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_interrupt_override,f,o) -#define ACPI_MADT3_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_nmi_source,f,o) -#define ACPI_MADT4_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_local_apic_nmi,f,o) -#define ACPI_MADT7_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_local_sapic,f,o) -#define ACPI_MADT8_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_interrupt_source,f,o) +/* Flags */ + +#define ACPI_WDRT_TIMER_ENABLED (1) /* 00: Timer enabled */ /* Reset to default packing */ diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 64b603cfe92..b0cdee69ff5 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -191,7 +191,7 @@ typedef s32 acpi_native_int; typedef u64 acpi_table_ptr; typedef u32 acpi_io_address; -typedef u64 acpi_physical_address; +typedef u32 acpi_physical_address; #define ACPI_MAX_PTR ACPI_UINT32_MAX #define ACPI_SIZE_MAX ACPI_UINT32_MAX @@ -311,36 +311,6 @@ typedef acpi_native_uint acpi_size; * ******************************************************************************/ -/* - * Pointer overlays to avoid lots of typecasting for - * code that accepts both physical and logical pointers. - */ -union acpi_pointers { - acpi_physical_address physical; - void *logical; - acpi_table_ptr value; -}; - -struct acpi_pointer { - u32 pointer_type; - union acpi_pointers pointer; -}; - -/* pointer_types for above */ - -#define ACPI_PHYSICAL_POINTER 0x01 -#define ACPI_LOGICAL_POINTER 0x02 - -/* Processor mode */ - -#define ACPI_PHYSICAL_ADDRESSING 0x04 -#define ACPI_LOGICAL_ADDRESSING 0x08 -#define ACPI_MEMORY_MODE 0x0C - -#define ACPI_PHYSMODE_PHYSPTR ACPI_PHYSICAL_ADDRESSING | ACPI_PHYSICAL_POINTER -#define ACPI_LOGMODE_PHYSPTR ACPI_LOGICAL_ADDRESSING | ACPI_PHYSICAL_POINTER -#define ACPI_LOGMODE_LOGPTR ACPI_LOGICAL_ADDRESSING | ACPI_LOGICAL_POINTER - /* Logical defines and NULL */ #ifdef FALSE @@ -490,21 +460,6 @@ typedef u64 acpi_integer; #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 6 #define ACPI_NOTIFY_POWER_FAULT (u8) 7 -/* - * Table types. These values are passed to the table related APIs - */ -typedef u32 acpi_table_type; - -#define ACPI_TABLE_ID_RSDP (acpi_table_type) 0 -#define ACPI_TABLE_ID_DSDT (acpi_table_type) 1 -#define ACPI_TABLE_ID_FADT (acpi_table_type) 2 -#define ACPI_TABLE_ID_FACS (acpi_table_type) 3 -#define ACPI_TABLE_ID_PSDT (acpi_table_type) 4 -#define ACPI_TABLE_ID_SSDT (acpi_table_type) 5 -#define ACPI_TABLE_ID_XSDT (acpi_table_type) 6 -#define ACPI_TABLE_ID_MAX 6 -#define ACPI_NUM_TABLE_TYPES (ACPI_TABLE_ID_MAX+1) - /* * Types associated with ACPI names and objects. The first group of * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition @@ -815,13 +770,6 @@ struct acpi_buffer { #define ACPI_SYS_MODE_LEGACY 0x0002 #define ACPI_SYS_MODES_MASK 0x0003 -/* - * ACPI Table Info. One per ACPI table _type_ - */ -struct acpi_table_info { - u32 count; -}; - /* * System info returned by acpi_get_system_info() */ @@ -833,8 +781,6 @@ struct acpi_system_info { u32 reserved2; u32 debug_level; u32 debug_layer; - u32 num_table_types; - struct acpi_table_info table_info[ACPI_TABLE_ID_MAX + 1]; }; /* -- cgit v1.2.3 From c5fc42ac4d4d6d3e3f619290b86890cb3725d2f8 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: misc fixes for new Table Manager: Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- include/acpi/aclocal.h | 21 ++++++++++++++------- include/acpi/actables.h | 6 ++++-- include/acpi/actbl.h | 12 ++++++------ 4 files changed, 25 insertions(+), 16 deletions(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 40f856c0f10..1fea8ae7db6 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20060823 +#define ACPI_CA_VERSION 0x20060828 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index 0f12fecba63..a870484eaa0 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -227,6 +227,16 @@ struct acpi_table_desc { u8 flags; }; +/* Flags for above */ + +#define ACPI_TABLE_ORIGIN_UNKNOWN (0) +#define ACPI_TABLE_ORIGIN_MAPPED (1) +#define ACPI_TABLE_ORIGIN_ALLOCATED (2) +#define ACPI_TABLE_ORIGIN_MASK (3) +#define ACPI_TABLE_IS_LOADED (4) + +/* One internal RSDT for table management */ + struct acpi_internal_rsdt { struct acpi_table_desc *tables; u32 count; @@ -234,14 +244,11 @@ struct acpi_internal_rsdt { u8 flags; }; -/* Flags for both structs above */ +/* Flags for above */ -#define ACPI_TABLE_ORIGIN_UNKNOWN (0) -#define ACPI_TABLE_ORIGIN_MAPPED (1) -#define ACPI_TABLE_ORIGIN_ALLOCATED (2) -#define ACPI_TABLE_ORIGIN_MASK (3) -#define ACPI_TABLE_FLAGS_LOADED (4) -#define ACPI_TABLE_FLAGS_ALLOW_RESIZE (8) +#define ACPI_ROOT_ORIGIN_UNKNOWN (0) /* ~ORIGIN_ALLOCATED */ +#define ACPI_ROOT_ORIGIN_ALLOCATED (1) +#define ACPI_ROOT_ALLOW_RESIZE (2) /* Predefined (fixed) table indexes */ diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 1737a2f045f..9183de1a10f 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -94,9 +94,11 @@ acpi_tb_print_table_header(acpi_physical_address address, u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length); -void acpi_tb_convert_fadt(struct acpi_table_fadt *fadt); +acpi_status +acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length); -acpi_status acpi_tb_parse_root_table(struct acpi_table_rsdp *rsdp, u8 flags); +acpi_status +acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags); void *acpi_tb_map(acpi_physical_address address, u32 length, u32 flags); diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index b455f540a16..c55939e344a 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -199,8 +199,8 @@ struct acpi_table_fadt { u32 pm1b_control_block; /* Port address of Power Mgt 1b Control Reg Blk */ u32 pm2_control_block; /* Port address of Power Mgt 2 Control Reg Blk */ u32 pm_timer_block; /* Port address of Power Mgt Timer Ctrl Reg Blk */ - u32 gpe0_block; /* Port addr of General Purpose acpi_event 0 Reg Blk */ - u32 gpe1_block; /* Port addr of General Purpose acpi_event 1 Reg Blk */ + u32 gpe0_block; /* Port addr of General Purpose Event 0 Reg Blk */ + u32 gpe1_block; /* Port addr of General Purpose Event 1 Reg Blk */ u8 pm1_event_length; /* Byte Length of ports at pm1_x_evt_blk */ u8 pm1_control_length; /* Byte Length of ports at pm1_x_cnt_blk */ u8 pm2_control_length; /* Byte Length of ports at pm2_cnt_blk */ @@ -226,14 +226,14 @@ struct acpi_table_fadt { u8 reserved4[3]; /* These three bytes must be zero */ u64 Xfacs; /* 64-bit physical address of FACS */ u64 Xdsdt; /* 64-bit physical address of DSDT */ - struct acpi_generic_address xpm1a_event_block; /* Extended Power Mgt 1a acpi_event Reg Blk address */ - struct acpi_generic_address xpm1b_event_block; /* Extended Power Mgt 1b acpi_event Reg Blk address */ + struct acpi_generic_address xpm1a_event_block; /* Extended Power Mgt 1a Event Reg Blk address */ + struct acpi_generic_address xpm1b_event_block; /* Extended Power Mgt 1b Event Reg Blk address */ struct acpi_generic_address xpm1a_control_block; /* Extended Power Mgt 1a Control Reg Blk address */ struct acpi_generic_address xpm1b_control_block; /* Extended Power Mgt 1b Control Reg Blk address */ struct acpi_generic_address xpm2_control_block; /* Extended Power Mgt 2 Control Reg Blk address */ struct acpi_generic_address xpm_timer_block; /* Extended Power Mgt Timer Ctrl Reg Blk address */ - struct acpi_generic_address xgpe0_block; /* Extended General Purpose acpi_event 0 Reg Blk address */ - struct acpi_generic_address xgpe1_block; /* Extended General Purpose acpi_event 1 Reg Blk address */ + struct acpi_generic_address xgpe0_block; /* Extended General Purpose Event 0 Reg Blk address */ + struct acpi_generic_address xgpe1_block; /* Extended General Purpose Event 1 Reg Blk address */ }; /* FADT flags */ -- cgit v1.2.3 From 8f34890dce60f7df6dd23a0d04977c6572adaab8 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: Update comments for individual table fields comments only Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actbl.h | 64 ++++++++++++++++++++++++++-------------------------- 1 file changed, 32 insertions(+), 32 deletions(-) (limited to 'include') diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index c55939e344a..aed49a5d583 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -56,7 +56,7 @@ #define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */ #define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */ #define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */ -#define ACPI_RSDP_NAME "RSDP" +#define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */ /* * All tables and structures must be byte-packed to match the ACPI @@ -185,55 +185,55 @@ struct acpi_table_fadt { struct acpi_table_header header; /* Common ACPI table header */ u32 facs; /* 32-bit physical address of FACS */ u32 dsdt; /* 32-bit physical address of DSDT */ - u8 model; /* System Interrupt Model (ACPI 1.0) not used in ACPI 2.0+ */ + u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */ u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */ u16 sci_interrupt; /* System vector of SCI interrupt */ - u32 smi_command; /* Port address of SMI command port */ + u32 smi_command; /* 32-bit Port address of SMI command port */ u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */ u8 pstate_control; /* Processor performance state control */ - u32 pm1a_event_block; /* Port address of Power Mgt 1a Event Reg Blk */ - u32 pm1b_event_block; /* Port address of Power Mgt 1b Event Reg Blk */ - u32 pm1a_control_block; /* Port address of Power Mgt 1a Control Reg Blk */ - u32 pm1b_control_block; /* Port address of Power Mgt 1b Control Reg Blk */ - u32 pm2_control_block; /* Port address of Power Mgt 2 Control Reg Blk */ - u32 pm_timer_block; /* Port address of Power Mgt Timer Ctrl Reg Blk */ - u32 gpe0_block; /* Port addr of General Purpose Event 0 Reg Blk */ - u32 gpe1_block; /* Port addr of General Purpose Event 1 Reg Blk */ - u8 pm1_event_length; /* Byte Length of ports at pm1_x_evt_blk */ - u8 pm1_control_length; /* Byte Length of ports at pm1_x_cnt_blk */ - u8 pm2_control_length; /* Byte Length of ports at pm2_cnt_blk */ - u8 pm_timer_length; /* Byte Length of ports at pm_tmr_blk */ - u8 gpe0_block_length; /* Byte Length of ports at gpe0_blk */ - u8 gpe1_block_length; /* Byte Length of ports at gpe1_blk */ - u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ - u8 cst_control; /* Support for the _CST object and C States change notification. */ + u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */ + u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */ + u32 pm1a_control_block; /* 32-bit Port address of Power Mgt 1a Control Reg Blk */ + u32 pm1b_control_block; /* 32-bit Port address of Power Mgt 1b Control Reg Blk */ + u32 pm2_control_block; /* 32-bit Port address of Power Mgt 2 Control Reg Blk */ + u32 pm_timer_block; /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */ + u32 gpe0_block; /* 32-bit Port address of General Purpose Event 0 Reg Blk */ + u32 gpe1_block; /* 32-bit Port address of General Purpose Event 1 Reg Blk */ + u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */ + u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */ + u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */ + u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */ + u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */ + u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */ + u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */ + u8 cst_control; /* Support for the _CST object and C States change notification */ u16 C2latency; /* Worst case HW latency to enter/exit C2 state */ u16 C3latency; /* Worst case HW latency to enter/exit C3 state */ u16 flush_size; /* Processor's memory cache line width, in bytes */ u16 flush_stride; /* Number of flush strides that need to be read */ - u8 duty_offset; /* Processor's duty cycle index in processor's P_CNT reg */ - u8 duty_width; /* Processor's duty cycle value bit width in P_CNT register. */ + u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */ + u8 duty_width; /* Processor duty cycle value bit width in P_CNT register. */ u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */ u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */ u8 century; /* Index to century in RTC CMOS RAM */ u16 boot_flags; /* IA-PC Boot Architecture Flags. See Table 5-10 for description */ u8 reserved; /* Reserved, must be zero */ - u32 flags; /* Miscellaneous flag bits */ - struct acpi_generic_address reset_register; /* Reset register address in GAS format */ + u32 flags; /* Miscellaneous flag bits (see below for individual flags) */ + struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */ u8 reset_value; /* Value to write to the reset_register port to reset the system */ - u8 reserved4[3]; /* These three bytes must be zero */ + u8 reserved4[3]; /* Reserved, must be zero */ u64 Xfacs; /* 64-bit physical address of FACS */ u64 Xdsdt; /* 64-bit physical address of DSDT */ - struct acpi_generic_address xpm1a_event_block; /* Extended Power Mgt 1a Event Reg Blk address */ - struct acpi_generic_address xpm1b_event_block; /* Extended Power Mgt 1b Event Reg Blk address */ - struct acpi_generic_address xpm1a_control_block; /* Extended Power Mgt 1a Control Reg Blk address */ - struct acpi_generic_address xpm1b_control_block; /* Extended Power Mgt 1b Control Reg Blk address */ - struct acpi_generic_address xpm2_control_block; /* Extended Power Mgt 2 Control Reg Blk address */ - struct acpi_generic_address xpm_timer_block; /* Extended Power Mgt Timer Ctrl Reg Blk address */ - struct acpi_generic_address xgpe0_block; /* Extended General Purpose Event 0 Reg Blk address */ - struct acpi_generic_address xgpe1_block; /* Extended General Purpose Event 1 Reg Blk address */ + struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */ + struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */ + struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */ + struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */ + struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */ + struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */ + struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */ + struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ }; /* FADT flags */ -- cgit v1.2.3 From ad71860a17ba33eb0e673e9e2cf5ba0d8e3e3fdd Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: minimal patch to integrate new tables into Linux Signed-off-by: Len Brown --- include/acpi/acglobal.h | 2 + include/acpi/acpi_bus.h | 1 - include/acpi/actbl.h | 7 ++- include/acpi/actbl2.h | 49 ----------------- include/acpi/actbl71.h | 134 --------------------------------------------- include/asm-i386/acpi.h | 8 +-- include/asm-ia64/acpi.h | 8 +-- include/asm-ia64/sn/acpi.h | 16 ------ include/asm-x86_64/acpi.h | 8 +-- include/linux/acpi.h | 46 ---------------- 10 files changed, 20 insertions(+), 259 deletions(-) delete mode 100644 include/acpi/actbl2.h delete mode 100644 include/acpi/actbl71.h delete mode 100644 include/asm-ia64/sn/acpi.h (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 82d42b82594..bd0fe7c6b38 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -147,6 +147,8 @@ ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE); */ ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list; ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT; +#define acpi_fadt acpi_gbl_FADT +extern acpi_native_uint acpi_gbl_permanent_mmap; /* * Handle both ACPI 1.0 and ACPI 2.0 Integer widths. The integer width is diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index fdd10953b2b..aef0e55253a 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -59,7 +59,6 @@ acpi_evaluate_reference(acpi_handle handle, #define ACPI_BUS_FILE_ROOT "acpi" extern struct proc_dir_entry *acpi_root_dir; -extern struct fadt_descriptor acpi_fadt; enum acpi_bus_removal_type { ACPI_BUS_REMOVAL_NORMAL = 0, diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index aed49a5d583..6f63b3bbc3f 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -236,6 +236,9 @@ struct acpi_table_fadt { struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ }; +#define fadt_descriptor acpi_table_fadt +#define sci_int sci_interrupt + /* FADT flags */ #define ACPI_FADT_WBINVD (1) /* 00: The wbinvd instruction works properly */ @@ -289,6 +292,8 @@ enum acpi_prefered_pm_profiles { /* * Get the remaining ACPI tables */ +/* + Don't include any new tables definitions for now. #include - +*/ #endif /* __ACTBL_H__ */ diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h deleted file mode 100644 index 67efe6cad27..00000000000 --- a/include/acpi/actbl2.h +++ /dev/null @@ -1,49 +0,0 @@ -/****************************************************************************** - * - * Name: actbl2.h - ACPI Specification Revision 2.0 Tables - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2006, R. Byron Moore - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACTBL2_H__ -#define __ACTBL2_H__ - -/* Code moved to both actbl.h and actbl1.h */ - -#endif /* __ACTBL2_H__ */ diff --git a/include/acpi/actbl71.h b/include/acpi/actbl71.h deleted file mode 100644 index 10ac05bb36b..00000000000 --- a/include/acpi/actbl71.h +++ /dev/null @@ -1,134 +0,0 @@ -/****************************************************************************** - * - * Name: actbl71.h - IA-64 Extensions to the ACPI Spec Rev. 0.71 - * This file includes tables specific to this - * specification revision. - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2003, R. Byron Moore - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ACTBL71_H__ -#define __ACTBL71_H__ - -/* 0.71 FADT address_space data item bitmasks defines */ -/* If the associated bit is zero then it is in memory space else in io space */ - -#define SMI_CMD_ADDRESS_SPACE 0x01 -#define PM1_BLK_ADDRESS_SPACE 0x02 -#define PM2_CNT_BLK_ADDRESS_SPACE 0x04 -#define PM_TMR_BLK_ADDRESS_SPACE 0x08 -#define GPE0_BLK_ADDRESS_SPACE 0x10 -#define GPE1_BLK_ADDRESS_SPACE 0x20 - -/* Only for clarity in declarations */ - -typedef u64 IO_ADDRESS; - -#pragma pack(1) -struct { /* Root System Descriptor Pointer */ - NATIVE_CHAR signature[8]; /* contains "RSD PTR " */ - u8 checksum; /* to make sum of struct == 0 */ - NATIVE_CHAR oem_id[6]; /* OEM identification */ - u8 reserved; /* Must be 0 for 1.0, 2 for 2.0 */ - u64 rsdt_physical_address; /* 64-bit physical address of RSDT */ -}; - -/*****************************************/ -/* IA64 Extensions to ACPI Spec Rev 0.71 */ -/* for the Root System Description Table */ -/*****************************************/ -struct { - struct acpi_table_header header; /* Table header */ - u32 reserved_pad; /* IA64 alignment, must be 0 */ - u64 table_offset_entry[1]; /* Array of pointers to other */ - /* tables' headers */ -}; - -/*******************************************/ -/* IA64 Extensions to ACPI Spec Rev 0.71 */ -/* for the Firmware ACPI Control Structure */ -/*******************************************/ -struct { - NATIVE_CHAR signature[4]; /* signature "FACS" */ - u32 length; /* length of structure, in bytes */ - u32 hardware_signature; /* hardware configuration signature */ - u32 reserved4; /* must be 0 */ - u64 firmware_waking_vector; /* ACPI OS waking vector */ - u64 global_lock; /* Global Lock */ - u32 S4bios_f:1; /* Indicates if S4BIOS support is present */ - u32 reserved1:31; /* must be 0 */ - u8 reserved3[28]; /* reserved - must be zero */ -}; - -/******************************************/ -/* IA64 Extensions to ACPI Spec Rev 0.71 */ -/* for the Fixed ACPI Description Table */ -/******************************************/ -struct { - struct acpi_table_header header; /* table header */ - u32 reserved_pad; /* IA64 alignment, must be 0 */ - u64 firmware_ctrl; /* 64-bit Physical address of FACS */ - u64 dsdt; /* 64-bit Physical address of DSDT */ - u8 model; /* System Interrupt Model */ - u8 address_space; /* Address Space Bitmask */ - u16 sci_int; /* System vector of SCI interrupt */ - u8 acpi_enable; /* value to write to smi_cmd to enable ACPI */ - u8 acpi_disable; /* value to write to smi_cmd to disable ACPI */ - u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ - u8 reserved2; /* reserved - must be zero */ - u64 smi_cmd; /* Port address of SMI command port */ - u64 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */ - u64 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */ - u64 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ - u64 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ - u64 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ - u64 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ - u64 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ - u64 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ - u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */ - u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */ - u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ - u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */ - u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ - u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ - u8 gpe1_base; /* offset in gpe model where gpe1 events start */ - u8 reserved3; /* reserved */ - u16 plvl2_lat; /* worst case HW latency to enter/exit C2 state */ - u16 plvl3_lat; /* worst case HW latency to enter/exit C3 state */ - u8 day_alrm; /* index to day-of-month alarm in RTC CMOS RAM */ - u8 mon_alrm; /* index to month-of-year alarm in RTC CMOS RAM */ - u8 century; /* index to century in RTC CMOS RAM */ - u8 reserved4; /* reserved */ - u32 flush_cash:1; /* PAL_FLUSH_CACHE is correctly supported */ - u32 reserved5:1; /* reserved - must be zero */ - u32 proc_c1:1; /* all processors support C1 state */ - u32 plvl2_up:1; /* C2 state works on MP system */ - u32 pwr_button:1; /* Power button is handled as a generic feature */ - u32 sleep_button:1; /* Sleep button is handled as a generic feature, or not present */ - u32 fixed_rTC:1; /* RTC wakeup stat not in fixed register space */ - u32 rtcs4:1; /* RTC wakeup stat not possible from S4 */ - u32 tmr_val_ext:1; /* tmr_val is 32 bits */ - u32 dock_cap:1; /* Supports Docking */ - u32 reserved6:22; /* reserved - must be zero */ -}; - -#pragma pack() - -#endif /* __ACTBL71_H__ */ diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h index 7cfad93edf1..0fb0c016db7 100644 --- a/include/asm-i386/acpi.h +++ b/include/asm-i386/acpi.h @@ -59,11 +59,11 @@ int __acpi_acquire_global_lock(unsigned int *lock); int __acpi_release_global_lock(unsigned int *lock); -#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \ - ((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr)) +#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = __acpi_acquire_global_lock(&facs->global_lock)) -#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \ - ((Acq) = __acpi_release_global_lock((unsigned int *) GLptr)) +#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = __acpi_release_global_lock(&facs->global_lock)) /* * Math helper asm macros diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h index 09a5dd0e44a..dba34d5a092 100644 --- a/include/asm-ia64/acpi.h +++ b/include/asm-ia64/acpi.h @@ -82,11 +82,11 @@ ia64_acpi_release_global_lock (unsigned int *lock) return old & 0x1; } -#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \ - ((Acq) = ia64_acpi_acquire_global_lock((unsigned int *) GLptr)) +#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock)) -#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \ - ((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr)) +#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = ia64_acpi_release_global_lock(&facs->global_lock)) #define acpi_disabled 0 /* ACPI always enabled on IA64 */ #define acpi_noirq 0 /* ACPI always enabled on IA64 */ diff --git a/include/asm-ia64/sn/acpi.h b/include/asm-ia64/sn/acpi.h deleted file mode 100644 index 2850a7ef5e7..00000000000 --- a/include/asm-ia64/sn/acpi.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_ACPI_H -#define _ASM_IA64_SN_ACPI_H - -#include "acpi/acglobal.h" - -#define SN_ACPI_BASE_SUPPORT() (acpi_gbl_DSDT->oem_revision >= 0x20101) - -#endif /* _ASM_IA64_SN_ACPI_H */ diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h index 6b6fc6f8be7..49f92f3cc32 100644 --- a/include/asm-x86_64/acpi.h +++ b/include/asm-x86_64/acpi.h @@ -57,11 +57,11 @@ int __acpi_acquire_global_lock(unsigned int *lock); int __acpi_release_global_lock(unsigned int *lock); -#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \ - ((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr)) +#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = __acpi_acquire_global_lock(&facs->global_lock)) -#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \ - ((Acq) = __acpi_release_global_lock((unsigned int *) GLptr)) +#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = __acpi_release_global_lock(&facs->global_lock)) /* * Math helper asm macros diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 91f1f236387..b3e8a268f6d 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -53,57 +53,11 @@ enum acpi_irq_model_id { extern enum acpi_irq_model_id acpi_irq_model; - -/* Root System Description Pointer (RSDP) */ - -struct acpi_table_rsdp { - char signature[8]; - u8 checksum; - char oem_id[6]; - u8 revision; - u32 rsdt_address; -} __attribute__ ((packed)); - -struct acpi20_table_rsdp { - char signature[8]; - u8 checksum; - char oem_id[6]; - u8 revision; - u32 rsdt_address; - u32 length; - u64 xsdt_address; - u8 ext_checksum; - u8 reserved[3]; -} __attribute__ ((packed)); - typedef struct { u8 type; u8 length; } __attribute__ ((packed)) acpi_table_entry_header; -/* Root System Description Table (RSDT) */ - -struct acpi_table_rsdt { - struct acpi_table_header header; - u32 entry[8]; -} __attribute__ ((packed)); - -/* Extended System Description Table (XSDT) */ - -struct acpi_table_xsdt { - struct acpi_table_header header; - u64 entry[1]; -} __attribute__ ((packed)); - -/* Fixed ACPI Description Table (FADT) */ - -struct acpi_table_fadt { - struct acpi_table_header header; - u32 facs_addr; - u32 dsdt_addr; - /* ... */ -} __attribute__ ((packed)); - /* Multiple APIC Description Table (MADT) */ struct acpi_table_madt { -- cgit v1.2.3 From 2502fffb1958da66fa50a475081cb6827acdd9f3 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: Add support for DMAR table Implement support for ACPI DMAR table (DMA Remapping Table) in header files and disassembler. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acdisasm.h | 14 ++++++++-- include/acpi/actbl1.h | 73 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h index 9a7d6921f53..722583af53b 100644 --- a/include/acpi/acdisasm.h +++ b/include/acpi/acdisasm.h @@ -97,9 +97,10 @@ typedef const struct acpi_dmtable_info { #define ACPI_DMT_CHKSUM 20 #define ACPI_DMT_SPACEID 21 #define ACPI_DMT_GAS 22 -#define ACPI_DMT_MADT 23 -#define ACPI_DMT_SRAT 24 -#define ACPI_DMT_EXIT 25 +#define ACPI_DMT_DMAR 23 +#define ACPI_DMT_MADT 24 +#define ACPI_DMT_SRAT 25 +#define ACPI_DMT_EXIT 26 typedef void (*ACPI_TABLE_HANDLER) (struct acpi_table_header * table); @@ -147,6 +148,11 @@ extern struct acpi_dmtable_info acpi_dm_table_info_boot[]; extern struct acpi_dmtable_info acpi_dm_table_info_cpep[]; extern struct acpi_dmtable_info acpi_dm_table_info_cpep0[]; extern struct acpi_dmtable_info acpi_dm_table_info_dbgp[]; +extern struct acpi_dmtable_info acpi_dm_table_info_dmar[]; +extern struct acpi_dmtable_info acpi_dm_table_info_dmar_hdr[]; +extern struct acpi_dmtable_info acpi_dm_table_info_dmar_scope[]; +extern struct acpi_dmtable_info acpi_dm_table_info_dmar0[]; +extern struct acpi_dmtable_info acpi_dm_table_info_dmar1[]; extern struct acpi_dmtable_info acpi_dm_table_info_ecdt[]; extern struct acpi_dmtable_info acpi_dm_table_info_facs[]; extern struct acpi_dmtable_info acpi_dm_table_info_fadt1[]; @@ -201,6 +207,8 @@ void acpi_dm_dump_asf(struct acpi_table_header *table); void acpi_dm_dump_cpep(struct acpi_table_header *table); +void acpi_dm_dump_dmar(struct acpi_table_header *table); + void acpi_dm_dump_fadt(struct acpi_table_header *table); void acpi_dm_dump_srat(struct acpi_table_header *table); diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 8ae30b7ed65..515d82c5ec6 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -61,6 +61,7 @@ #define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */ #define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */ #define ACPI_SIG_DBGP "DBGP" /* Debug Port table */ +#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */ #define ACPI_SIG_ECDT "ECDT" /* Embedded Controller Boot Resources Table */ #define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */ #define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */ @@ -226,6 +227,78 @@ struct acpi_table_dbgp { struct acpi_generic_address debug_port; }; +/******************************************************************************* + * + * DMAR - DMA Remapping table + * + ******************************************************************************/ + +struct acpi_table_dmar { + struct acpi_table_header header; /* Common ACPI table header */ + u8 width; /* Host Address Width */ + u8 reserved[11]; +}; + +/* DMAR subtable header */ + +struct acpi_dmar_header { + u16 type; + u16 length; + u8 flags; + u8 reserved[3]; +}; + +/* Values for subtable type in struct acpi_dmar_header */ + +enum acpi_dmar_type { + ACPI_DMAR_TYPE_HARDWARE_UNIT = 0, + ACPI_DMAR_TYPE_RESERVED_MEMORY = 1, + ACPI_DMAR_TYPE_RESERVED = 2 /* 2 and greater are reserved */ +}; + +struct acpi_dmar_device_scope { + u8 entry_type; + u8 length; + u8 segment; + u8 bus; +}; + +/* Values for entry_type in struct acpi_dmar_device_scope */ + +enum acpi_dmar_scope_type { + ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0, + ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1, + ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2, + ACPI_DMAR_SCOPE_TYPE_RESERVED = 3 /* 3 and greater are reserved */ +}; + +/* + * DMAR Sub-tables, correspond to Type in struct acpi_dmar_header + */ + +/* 0: Hardware Unit Definition */ + +struct acpi_dmar_hardware_unit { + struct acpi_dmar_header header; + u64 address; /* Register Base Address */ +}; + +/* Flags */ + +#define ACPI_DMAR_INCLUDE_ALL (1) + +/* 1: Reserved Memory Defininition */ + +struct acpi_dmar_reserved_memory { + struct acpi_dmar_header header; + u64 address; /* 4_k aligned base address */ + u64 end_address; /* 4_k aligned limit address */ +}; + +/* Flags */ + +#define ACPI_DMAR_ALLOW_ALL (1) + /******************************************************************************* * * ECDT - Embedded Controller Boot Resources Table -- cgit v1.2.3 From fdffb72d23172c91af56983f303d1986994df522 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: Add acpi_gpe_count global to track the number of GPE events Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acglobal.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index bd0fe7c6b38..715c4812fe7 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -80,6 +80,10 @@ extern u32 acpi_dbg_layer; extern u32 acpi_gbl_nesting_level; +/* Event counters */ + +ACPI_EXTERN u32 acpi_gpe_count; + /* Support for dynamic control method tracing mechanism */ ACPI_EXTERN u32 acpi_gbl_original_dbg_level; -- cgit v1.2.3 From c5a7156959e89b32260ad6072bbf5077bcdfbeee Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: Disable all wake GPEs after first one recieved Change for GPE support: when a wake GPE is received, now all wake GPEs are immediately disabled to prevent the waking GPE from firing again, and to prevent other wake GPEs from interrupting the wake process. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acglobal.h | 68 ++++++++++++++++++++++++------------------------- include/acpi/actypes.h | 6 +---- 2 files changed, 34 insertions(+), 40 deletions(-) (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 715c4812fe7..b74cd9b670b 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -58,41 +58,6 @@ #define ACPI_INIT_GLOBAL(a,b) a #endif -/* - * Keep local copies of these FADT-based registers. NOTE: These globals - * are first in this file for alignment reasons on 64-bit systems. - */ -ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable; -ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable; - -/***************************************************************************** - * - * Debug support - * - ****************************************************************************/ - -/* Runtime configuration of debug print levels */ - -extern u32 acpi_dbg_level; -extern u32 acpi_dbg_layer; - -/* Procedure nesting level for debug output */ - -extern u32 acpi_gbl_nesting_level; - -/* Event counters */ - -ACPI_EXTERN u32 acpi_gpe_count; - -/* Support for dynamic control method tracing mechanism */ - -ACPI_EXTERN u32 acpi_gbl_original_dbg_level; -ACPI_EXTERN u32 acpi_gbl_original_dbg_layer; -ACPI_EXTERN acpi_name acpi_gbl_trace_method_name; -ACPI_EXTERN u32 acpi_gbl_trace_dbg_level; -ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer; -ACPI_EXTERN u32 acpi_gbl_trace_flags; - /***************************************************************************** * * Runtime configuration (static defaults that can be overriden at runtime) @@ -137,6 +102,34 @@ ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE); */ ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE); +/***************************************************************************** + * + * Debug support + * + ****************************************************************************/ + +/* Runtime configuration of debug print levels */ + +extern u32 acpi_dbg_level; +extern u32 acpi_dbg_layer; + +/* Procedure nesting level for debug output */ + +extern u32 acpi_gbl_nesting_level; + +/* Event counters */ + +ACPI_EXTERN u32 acpi_gpe_count; + +/* Support for dynamic control method tracing mechanism */ + +ACPI_EXTERN u32 acpi_gbl_original_dbg_level; +ACPI_EXTERN u32 acpi_gbl_original_dbg_layer; +ACPI_EXTERN acpi_name acpi_gbl_trace_method_name; +ACPI_EXTERN u32 acpi_gbl_trace_dbg_level; +ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer; +ACPI_EXTERN u32 acpi_gbl_trace_flags; + /***************************************************************************** * * ACPI Table globals @@ -154,6 +147,11 @@ ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT; #define acpi_fadt acpi_gbl_FADT extern acpi_native_uint acpi_gbl_permanent_mmap; +/* These addresses are calculated from FADT address values */ + +ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable; +ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable; + /* * Handle both ACPI 1.0 and ACPI 2.0 Integer widths. The integer width is * determined by the revision of the DSDT: If the DSDT revision is less than diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index b0cdee69ff5..fe9eb0ea32e 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -592,7 +592,7 @@ typedef u32 acpi_event_status; * | | | +--- Type of dispatch -- to method, handler, or none * | | +--- Enabled for runtime? * | +--- Enabled for wake? - * +--- System state when GPE ocurred (running/waking) + * +--- Unused */ #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01 @@ -618,10 +618,6 @@ typedef u32 acpi_event_status; #define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */ -#define ACPI_GPE_SYSTEM_MASK (u8) 0x80 -#define ACPI_GPE_SYSTEM_RUNNING (u8) 0x80 -#define ACPI_GPE_SYSTEM_WAKING (u8) 0x00 - /* * Flags for GPE and Lock interfaces */ -- cgit v1.2.3 From 3d81b236a82a26fa8bdef9096829675d81890dc9 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: Fix unalignment in acpi_ut_repair_name Update interface to acpi_ut_repair_name() to avoid alignment issues on IA64 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acutils.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h index ba039ea1a05..beb07ac83b8 100644 --- a/include/acpi/acutils.h +++ b/include/acpi/acutils.h @@ -470,7 +470,7 @@ void acpi_ut_print_string(char *string, u8 max_length); u8 acpi_ut_valid_acpi_name(u32 name); -acpi_name acpi_ut_repair_name(acpi_name name); +acpi_name acpi_ut_repair_name(char *name); u8 acpi_ut_valid_acpi_char(char character, acpi_native_uint position); -- cgit v1.2.3 From 69874165ab953a62f9adb3096ccd84ed2561a602 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: Store GPE number instead of bitmask Update internal GPE data structure to simplify debug, use gpe_number instead of register bitmask. Signed-off-by: Bob Moore Signed-off-by: Len Brown --- include/acpi/acglobal.h | 1 - include/acpi/aclocal.h | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index b74cd9b670b..0c2e1ae72c3 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -240,7 +240,6 @@ ACPI_EXTERN u8 acpi_gbl_system_awake_and_running; extern u8 acpi_gbl_shutdown; extern u32 acpi_gbl_startup_flags; -extern const u8 acpi_gbl_decode_to8bit[8]; extern const char *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT]; extern const char *acpi_gbl_highest_dstate_names[4]; extern const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES]; diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index a870484eaa0..553763d7312 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -367,7 +367,7 @@ struct acpi_gpe_event_info { union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */ struct acpi_gpe_register_info *register_info; /* Backpointer to register info */ u8 flags; /* Misc info about this GPE */ - u8 register_bit; /* This GPE bit within the register */ + u8 gpe_number; /* This GPE */ }; /* Information about a GPE register pair, one per each status/enable pair in an array */ -- cgit v1.2.3 From 84fb2c97731c1631c5548c15f3698ad82c274245 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: Split acpi_format_exception into two parts Split acpi_format_exception into two parts. New function is acpi_ut_verify_exception and will be used to verify exception codes returned by user. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acglobal.h | 8 ++++++++ include/acpi/acutils.h | 2 ++ 2 files changed, 10 insertions(+) (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 0c2e1ae72c3..8dab29a02e3 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -245,6 +245,14 @@ extern const char *acpi_gbl_highest_dstate_names[4]; extern const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES]; extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS]; +/* Exception codes */ + +extern char const *acpi_gbl_exception_names_env[]; +extern char const *acpi_gbl_exception_names_pgm[]; +extern char const *acpi_gbl_exception_names_tbl[]; +extern char const *acpi_gbl_exception_names_aml[]; +extern char const *acpi_gbl_exception_names_ctrl[]; + /***************************************************************************** * * Namespace globals diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h index beb07ac83b8..3c66f54e1fd 100644 --- a/include/acpi/acutils.h +++ b/include/acpi/acutils.h @@ -453,6 +453,8 @@ acpi_ut_short_divide(acpi_integer in_dividend, /* * utmisc */ +const char *acpi_ut_validate_exception(acpi_status status); + u8 acpi_ut_is_aml_table(struct acpi_table_header *table); acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id); -- cgit v1.2.3 From 0eaa14c02809cc93386b907846da5c024fd73012 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: Update version to 20060831 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 1fea8ae7db6..4db7858abad 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20060828 +#define ACPI_CA_VERSION 0x20060831 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, @@ -158,8 +158,8 @@ /* Sizes for ACPI table headers */ -#define ACPI_OEM_ID_SIZE 6 -#define ACPI_OEM_TABLE_ID_SIZE 8 +#define ACPI_OEM_ID_SIZE 6 +#define ACPI_OEM_TABLE_ID_SIZE 8 /* Constants used in searching for the RSDP in low memory */ -- cgit v1.2.3 From 1ba753acb372c2955a4843302e92e49ce82e2fea Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: Re-implement interpreters' "serialized mode" Enhanced the implementation of the interpreters' serialized mode (boot with "acpi_serialize" to set acpi_glb_all_methods_serialized flag.) When this mode is specified, instead of creating a serialization semaphore per control method, the interpreter lock is simply no longer released before a blocking operation during control method execution. This effectively makes the AML Interpreter single-threaded. The overhead of a semaphore per-method is eliminated. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acinterp.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h index f266b385115..8aebe579316 100644 --- a/include/acpi/acinterp.h +++ b/include/acpi/acinterp.h @@ -445,10 +445,14 @@ acpi_ex_copy_integer_to_buffer_field(union acpi_operand_object *source_desc, /* * exutils - interpreter/scanner utilities */ -acpi_status acpi_ex_enter_interpreter(void); +void acpi_ex_enter_interpreter(void); void acpi_ex_exit_interpreter(void); +void acpi_ex_reacquire_interpreter(void); + +void acpi_ex_relinquish_interpreter(void); + void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc); u8 acpi_ex_acquire_global_lock(u32 rule); -- cgit v1.2.3 From 765ec20180fb70b4ee9d730167b2a0b76879f791 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: Delete stale FADT functions outside tbfadt.c. Moved all FADT-related functions to a new file, tbfadt.c. Eliminated the acpi_hw_initialize function - the FADT registers are now validated when the table is loaded. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/achware.h | 2 -- include/acpi/actables.h | 9 +++++++++ include/acpi/acutils.h | 2 -- 3 files changed, 9 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/acpi/achware.h b/include/acpi/achware.h index 29b60a8c059..f3e9a03d651 100644 --- a/include/acpi/achware.h +++ b/include/acpi/achware.h @@ -61,8 +61,6 @@ /* * hwacpi - high level functions */ -acpi_status acpi_hw_initialize(void); - acpi_status acpi_hw_set_mode(u32 mode); u32 acpi_hw_get_mode(void); diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 9183de1a10f..62947344b93 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -44,6 +44,11 @@ #ifndef __ACTABLES_H__ #define __ACTABLES_H__ +/* + * tbfadt - FADT parse/convert/validate + */ +void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags); + /* * tbfind - find ACPI table */ @@ -97,6 +102,10 @@ u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length); acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length); +void +acpi_tb_install_table(acpi_physical_address address, + u8 flags, char *signature, acpi_native_uint table_index); + acpi_status acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags); diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h index 3c66f54e1fd..ba7d7e9c9b8 100644 --- a/include/acpi/acutils.h +++ b/include/acpi/acutils.h @@ -141,8 +141,6 @@ acpi_status acpi_ut_hardware_initialize(void); void acpi_ut_subsystem_shutdown(void); -acpi_status acpi_ut_validate_fadt(void); - /* * utclib - Local implementations of C library functions */ -- cgit v1.2.3 From 694b0b2092bce3f4610626b04158a6f3a95058e6 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: add ASF comment Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actbl1.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 515d82c5ec6..8494c4269db 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -97,6 +97,8 @@ struct acpi_subtable_header { * * ASF - Alert Standard Format table (Signature "ASF!") * + * Conforms to the Alert Standard Format Specification V2.0, 23 April 2003 + * ******************************************************************************/ struct acpi_table_asf { -- cgit v1.2.3 From 77389e1263a7c9bc8040bda726e08b6501ba1c8b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: re-factor table init routines for benefit of iASL Required new table init interface since iASL does not use RSDP/XSDT. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actables.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 62947344b93..99fa51a59a5 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -44,6 +44,8 @@ #ifndef __ACTABLES_H__ #define __ACTABLES_H__ +acpi_status acpi_allocate_root_table(u32 initial_table_count); + /* * tbfadt - FADT parse/convert/validate */ -- cgit v1.2.3 From cc2a472b8411ce0b71738039e15d45917da30fbe Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: IsResourceTemplate now returns ACPI_STATUS to differentiate the failure modes. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acdisasm.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h index 722583af53b..b29d77a8ff5 100644 --- a/include/acpi/acdisasm.h +++ b/include/acpi/acdisasm.h @@ -140,7 +140,9 @@ extern const char *acpi_gbl_match_ops[]; extern struct acpi_dmtable_info acpi_dm_table_info_asf0[]; extern struct acpi_dmtable_info acpi_dm_table_info_asf1[]; +extern struct acpi_dmtable_info acpi_dm_table_info_asf1a[]; extern struct acpi_dmtable_info acpi_dm_table_info_asf2[]; +extern struct acpi_dmtable_info acpi_dm_table_info_asf2a[]; extern struct acpi_dmtable_info acpi_dm_table_info_asf3[]; extern struct acpi_dmtable_info acpi_dm_table_info_asf4[]; extern struct acpi_dmtable_info acpi_dm_table_info_asf_hdr[]; @@ -322,7 +324,7 @@ acpi_dm_resource_template(struct acpi_op_walk_info *info, union acpi_parse_object *op, u8 * byte_data, u32 byte_count); -u8 acpi_dm_is_resource_template(union acpi_parse_object *op); +acpi_status acpi_dm_is_resource_template(union acpi_parse_object *op); void acpi_dm_indent(u32 level); -- cgit v1.2.3 From 775d85b6aa33116da8aacad4168c540ce86a1803 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: Add declarations for ASF! sub-tables Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actbl1.h | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 8494c4269db..3156d1ab61f 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -148,7 +148,21 @@ struct acpi_asf_alert { u8 deassert_mask; u8 alerts; u8 data_length; - u8 array[1]; +}; + +struct acpi_asf_alert_data { + u8 address; + u8 command; + u8 mask; + u8 value; + u8 sensor_type; + u8 type; + u8 offset; + u8 source_type; + u8 severity; + u8 sensor_number; + u8 entity; + u8 instance; }; /* 2: ASF Remote Control */ @@ -158,7 +172,13 @@ struct acpi_asf_remote { u8 controls; u8 data_length; u16 reserved2; - u8 array[1]; +}; + +struct acpi_asf_control_data { + u8 function; + u8 address; + u8 command; + u8 value; }; /* 3: ASF RMCP Boot Options */ @@ -180,7 +200,6 @@ struct acpi_asf_address { struct acpi_asf_header header; u8 eprom_address; u8 devices; - u8 smbus_addresses[1]; }; /******************************************************************************* -- cgit v1.2.3 From ea5d8ebcbb7ca3bcb35a2133805571295f3f06e8 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: FADT verification is now table driven. Disassembler now verifies an input Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actables.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 99fa51a59a5..65a69cab9db 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -51,6 +51,10 @@ acpi_status acpi_allocate_root_table(u32 initial_table_count); */ void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags); +void acpi_tb_convert_fadt(void); + +void acpi_tb_validate_fadt(struct acpi_table_fadt *table); + /* * tbfind - find ACPI table */ -- cgit v1.2.3 From 7139284460fba90c4dfcfae76680ad36b45f5982 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: New common routine for creating and verifying a local FADT. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actables.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include') diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 65a69cab9db..4079f8a0ea2 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -51,9 +51,7 @@ acpi_status acpi_allocate_root_table(u32 initial_table_count); */ void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags); -void acpi_tb_convert_fadt(void); - -void acpi_tb_validate_fadt(struct acpi_table_fadt *table); +void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length); /* * tbfind - find ACPI table -- cgit v1.2.3 From 4cdf469090f732ab8a45b2d30b43ec5745699285 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:20 +0300 Subject: ACPICA: Update version to 20060912 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 4db7858abad..7b02a13e140 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20060831 +#define ACPI_CA_VERSION 0x20060912 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From 14d64b5e36a82ef21a51d8a15639d26b75a79499 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:21 +0300 Subject: ACPICA: Add full table name to disassembler output Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acdisasm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h index b29d77a8ff5..ea35f1f8e28 100644 --- a/include/acpi/acdisasm.h +++ b/include/acpi/acdisasm.h @@ -101,6 +101,7 @@ typedef const struct acpi_dmtable_info { #define ACPI_DMT_MADT 24 #define ACPI_DMT_SRAT 25 #define ACPI_DMT_EXIT 26 +#define ACPI_DMT_SIG 27 typedef void (*ACPI_TABLE_HANDLER) (struct acpi_table_header * table); @@ -109,6 +110,7 @@ struct acpi_dmtable_data { char *signature; struct acpi_dmtable_info *table_info; ACPI_TABLE_HANDLER table_handler; + char *name; }; struct acpi_op_walk_info { -- cgit v1.2.3 From d8c71b6d3b21cf21ad775e1cf6da95bf87bd5ad4 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:21 +0300 Subject: ACPICA: Remove obsolete Flags parameter. Remove flags parameter for acpi_{get,set}_register(). It is no longer necessary now that these functions use a spinlock for mutual exclusion. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/achware.h | 2 +- include/acpi/acpixf.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/acpi/achware.h b/include/acpi/achware.h index f3e9a03d651..ae449f235cf 100644 --- a/include/acpi/achware.h +++ b/include/acpi/achware.h @@ -82,7 +82,7 @@ acpi_hw_low_level_read(u32 width, acpi_status acpi_hw_low_level_write(u32 width, u32 value, struct acpi_generic_address *reg); -acpi_status acpi_hw_clear_acpi_status(u32 flags); +acpi_status acpi_hw_clear_acpi_status(void); /* * hwgpe - GPE support diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index f4b0a81ee7c..9c26400acc4 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -312,9 +312,9 @@ acpi_resource_to_address64(struct acpi_resource *resource, /* * Hardware (ACPI device) interfaces */ -acpi_status acpi_get_register(u32 register_id, u32 * return_value, u32 flags); +acpi_status acpi_get_register(u32 register_id, u32 * return_value); -acpi_status acpi_set_register(u32 register_id, u32 value, u32 flags); +acpi_status acpi_set_register(u32 register_id, u32 value); acpi_status acpi_set_firmware_waking_vector(acpi_physical_address physical_address); -- cgit v1.2.3 From cb219bb6bf6f8cabdf07fbbca8487eee5a91ff05 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:21 +0300 Subject: ACPICA: Add new subsystem state bit that is set after SubsystemInitialize is called Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actypes.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index fe9eb0ea32e..6fa3f2a13db 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -412,7 +412,8 @@ typedef u64 acpi_integer; /* * Initialization state */ -#define ACPI_INITIALIZED_OK 0x01 +#define ACPI_SUBSYSTEM_INITIALIZE 0x01 +#define ACPI_INITIALIZED_OK 0x02 /* * Power state values -- cgit v1.2.3 From 2b705a8abbce1753c1e5af5ae2ed97e374277654 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:21 +0300 Subject: ACPICA: Update version to 20060927 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 7b02a13e140..bd5560b88de 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20060912 +#define ACPI_CA_VERSION 0x20060927 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From 4d0b4af958453afe871022e44abd57fac09baf67 Mon Sep 17 00:00:00 2001 From: Mikhail Kouzmich Date: Fri, 2 Feb 2007 19:48:21 +0300 Subject: ACPICA: Restructured module into multiple functions. Restructured the AML ParseLoop function, breaking it into several subfunctions in order to reduce CPU stack use and improve maintainability Signed-off-by: Bob Moore Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acexcep.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 797ca1ea521..8fa00e8b17f 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -178,8 +178,10 @@ #define AE_CTRL_BREAK (acpi_status) (0x0009 | AE_CODE_CONTROL) #define AE_CTRL_CONTINUE (acpi_status) (0x000A | AE_CODE_CONTROL) #define AE_CTRL_SKIP (acpi_status) (0x000B | AE_CODE_CONTROL) +#define AE_CTRL_PARSE_CONTINUE (acpi_status) (0x000C | AE_CODE_CONTROL) +#define AE_CTRL_PARSE_PENDING (acpi_status) (0x000D | AE_CODE_CONTROL) -#define AE_CODE_CTRL_MAX 0x000B +#define AE_CODE_CTRL_MAX 0x000D #ifdef DEFINE_ACPI_GLOBALS @@ -291,7 +293,9 @@ char const *acpi_gbl_exception_names_ctrl[] = { "AE_CTRL_TRANSFER", "AE_CTRL_BREAK", "AE_CTRL_CONTINUE", - "AE_CTRL_SKIP" + "AE_CTRL_SKIP", + "AE_CTRL_PARSE_CONTINUE", + "AE_CTRL_PARSE_PENDING" }; #endif /* ACPI GLOBALS */ -- cgit v1.2.3 From d1fdda83f7c567f376ddd4305833de09f7919ca9 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:21 +0300 Subject: ACPICA: Fix race condition with AcpiWalkNamespace. Fixed a problem with a possible race condition between threads executing AcpiWalkNamespace and the AML interpreter. This condition was removed by modifying AcpiWalkNamespace to (by default) ignore all temporary namespace entries created during any concurrent control method execution Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/aclocal.h | 2 +- include/acpi/acnamesp.h | 10 +++++++--- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index 553763d7312..287da6fe256 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -204,7 +204,7 @@ struct acpi_namespace_node { /* Namespace Node flags */ #define ANOBJ_END_OF_PEER_LIST 0x01 /* End-of-list, Peer field points to parent */ -#define ANOBJ_RESERVED 0x02 /* Available for future use */ +#define ANOBJ_TEMPORARY 0x02 /* Node is create by a method and is temporary */ #define ANOBJ_METHOD_ARG 0x04 /* Node is a method argument */ #define ANOBJ_METHOD_LOCAL 0x08 /* Node is a method local */ #define ANOBJ_SUBTREE_HAS_INI 0x10 /* Used to optimize device initialization */ diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h index b3b9f0ec79c..19a61292af6 100644 --- a/include/acpi/acnamesp.h +++ b/include/acpi/acnamesp.h @@ -65,9 +65,13 @@ #define ACPI_NS_ERROR_IF_FOUND 0x08 #define ACPI_NS_PREFIX_IS_SCOPE 0x10 #define ACPI_NS_EXTERNAL 0x20 +#define ACPI_NS_TEMPORARY 0x40 -#define ACPI_NS_WALK_UNLOCK TRUE -#define ACPI_NS_WALK_NO_UNLOCK FALSE +/* Flags for acpi_ns_walk_namespace */ + +#define ACPI_NS_WALK_NO_UNLOCK 0 +#define ACPI_NS_WALK_UNLOCK 0x01 +#define ACPI_NS_WALK_TEMP_NODES 0x02 /* * nsinit - Namespace initialization @@ -92,7 +96,7 @@ acpi_status acpi_ns_walk_namespace(acpi_object_type type, acpi_handle start_object, u32 max_depth, - u8 unlock_before_callback, + u32 flags, acpi_walk_callback user_function, void *context, void **return_value); -- cgit v1.2.3 From ec3153fb0e96988dc7e378b3ab01e05131ba713b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:21 +0300 Subject: ACPICA: Use manifest constants for parse pass number Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/aclocal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index 287da6fe256..7b28d935145 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -162,7 +162,7 @@ struct acpi_mutex_info { typedef enum { ACPI_IMODE_LOAD_PASS1 = 0x01, ACPI_IMODE_LOAD_PASS2 = 0x02, - ACPI_IMODE_EXECUTE = 0x0E + ACPI_IMODE_EXECUTE = 0x03 } acpi_interpreter_mode; union acpi_name_union { -- cgit v1.2.3 From a7a22fa9c368ba22f13b87585052b8cdbbc18f7a Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Update version to 20061011 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index bd5560b88de..9aa3b191f11 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20060927 +#define ACPI_CA_VERSION 0x20061011 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From ceb6c46839021d5c7c338d48deac616944660124 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table manager Signed-off-by: Len Brown --- include/linux/acpi.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index b3e8a268f6d..88cb1fe22b4 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -340,7 +340,7 @@ enum acpi_table_id { ACPI_TABLE_COUNT }; -typedef int (*acpi_table_handler) (unsigned long phys_addr, unsigned long size); +typedef int (*acpi_table_handler) (struct acpi_table_header *header); extern acpi_table_handler acpi_table_ops[ACPI_TABLE_COUNT]; @@ -353,11 +353,10 @@ int acpi_boot_table_init (void); int acpi_numa_init (void); int acpi_table_init (void); -int acpi_table_parse (enum acpi_table_id id, acpi_table_handler handler); -int acpi_get_table_header_early (enum acpi_table_id id, struct acpi_table_header **header); +int acpi_table_parse (char *id, acpi_table_handler handler); int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries); int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries); -int acpi_parse_mcfg (unsigned long phys_addr, unsigned long size); +int acpi_parse_mcfg (struct acpi_table_header *header); void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr); void acpi_table_print_madt_entry (acpi_table_entry_header *madt); void acpi_table_print_srat_entry (acpi_table_entry_header *srat); -- cgit v1.2.3 From cee324b145a1e5488b34191de670e5ed1d346ebb Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: use new ACPI headers. Signed-off-by: Len Brown --- include/acpi/acglobal.h | 1 - include/acpi/actbl.h | 3 --- include/acpi/actbl1.h | 10 ---------- 3 files changed, 14 deletions(-) (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 8dab29a02e3..d1a5363ffc4 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -144,7 +144,6 @@ ACPI_EXTERN u32 acpi_gbl_trace_flags; */ ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list; ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT; -#define acpi_fadt acpi_gbl_FADT extern acpi_native_uint acpi_gbl_permanent_mmap; /* These addresses are calculated from FADT address values */ diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 6f63b3bbc3f..c5d5ec3638e 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -236,9 +236,6 @@ struct acpi_table_fadt { struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ }; -#define fadt_descriptor acpi_table_fadt -#define sci_int sci_interrupt - /* FADT flags */ #define ACPI_FADT_WBINVD (1) /* 00: The wbinvd instruction works properly */ diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 3156d1ab61f..b7178ebfe3e 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -669,16 +669,6 @@ struct acpi_srat_mem_affinity { #define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */ #define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */ -/* Memory types */ - -enum acpi_address_range_id { - ACPI_ADDRESS_RANGE_MEMORY = 1, - ACPI_ADDRESS_RANGE_RESERVED = 2, - ACPI_ADDRESS_RANGE_ACPI = 3, - ACPI_ADDRESS_RANGE_NVS = 4, - ACPI_ADDRESS_RANGE_COUNT = 5 -}; - /******************************************************************************* * * TCPA - Trusted Computing Platform Alliance table -- cgit v1.2.3 From ad363f80c386bc4701b1bc2cdf08ca9b96a9337b Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table definitions. Signed-off-by: Len Brown --- include/acpi/actbl.h | 5 ++--- include/linux/acpi.h | 59 ---------------------------------------------------- 2 files changed, 2 insertions(+), 62 deletions(-) (limited to 'include') diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index c5d5ec3638e..d6af14e1c7e 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -289,8 +289,7 @@ enum acpi_prefered_pm_profiles { /* * Get the remaining ACPI tables */ -/* - Don't include any new tables definitions for now. + #include -*/ + #endif /* __ACTBL_H__ */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 88cb1fe22b4..5a2b3633220 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -60,15 +60,6 @@ typedef struct { /* Multiple APIC Description Table (MADT) */ -struct acpi_table_madt { - struct acpi_table_header header; - u32 lapic_address; - struct { - u32 pcat_compat:1; - u32 reserved:31; - } flags; -} __attribute__ ((packed)); - enum acpi_madt_entry_id { ACPI_MADT_LAPIC = 0, ACPI_MADT_IOAPIC, @@ -185,15 +176,6 @@ struct acpi_gen_regaddr { u32 addrh; } __attribute__ ((packed)); -struct acpi_table_hpet { - struct acpi_table_header header; - u32 id; - struct acpi_gen_regaddr addr; - u8 number; - u16 min_tick; - u8 page_protect; -} __attribute__ ((packed)); - /* * Simple Boot Flags * http://www.microsoft.com/whdc/hwdev/resources/specs/simp_bios.mspx @@ -218,12 +200,6 @@ struct acpi_table_sbf * http://www.microsoft.com/whdc/hwdev/platform/proc/SRAT.mspx */ -struct acpi_table_srat { - struct acpi_table_header header; - u32 table_revision; - u64 reserved; -} __attribute__ ((packed)); - enum acpi_srat_entry_id { ACPI_SRAT_PROCESSOR_AFFINITY = 0, ACPI_SRAT_MEMORY_AFFINITY, @@ -267,36 +243,6 @@ enum acpi_address_range_id { ACPI_ADDRESS_RANGE_COUNT }; -/* - * System Locality Information Table (SLIT) - * see http://devresource.hp.com/devresource/docs/techpapers/ia64/slit.pdf - */ - -struct acpi_table_slit { - struct acpi_table_header header; - u64 localities; - u8 entry[1]; /* real size = localities^2 */ -} __attribute__ ((packed)); - -/* Smart Battery Description Table (SBST) */ - -struct acpi_table_sbst { - struct acpi_table_header header; - u32 warning; /* Warn user */ - u32 low; /* Critical sleep */ - u32 critical; /* Critical shutdown */ -} __attribute__ ((packed)); - -/* Embedded Controller Boot Resources Table (ECDT) */ - -struct acpi_table_ecdt { - struct acpi_table_header header; - struct acpi_generic_address ec_control; - struct acpi_generic_address ec_data; - u32 uid; - u8 gpe_bit; - char ec_id[0]; -} __attribute__ ((packed)); /* PCI MMCONFIG */ @@ -309,11 +255,6 @@ struct acpi_table_mcfg_config { u8 end_bus_number; u8 reserved[4]; } __attribute__ ((packed)); -struct acpi_table_mcfg { - struct acpi_table_header header; - u8 reserved[8]; - struct acpi_table_mcfg_config config[0]; -} __attribute__ ((packed)); /* Table Handlers */ -- cgit v1.2.3 From 5f3b1a8b6737b09ce5df4ec9fad4ad271aecb5fb Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table definitions (non-conflicting) Signed-off-by: Len Brown --- include/linux/acpi.h | 106 ++------------------------------------------------- 1 file changed, 3 insertions(+), 103 deletions(-) (limited to 'include') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 5a2b3633220..fac7a7b1f5f 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -58,106 +58,6 @@ typedef struct { u8 length; } __attribute__ ((packed)) acpi_table_entry_header; -/* Multiple APIC Description Table (MADT) */ - -enum acpi_madt_entry_id { - ACPI_MADT_LAPIC = 0, - ACPI_MADT_IOAPIC, - ACPI_MADT_INT_SRC_OVR, - ACPI_MADT_NMI_SRC, - ACPI_MADT_LAPIC_NMI, - ACPI_MADT_LAPIC_ADDR_OVR, - ACPI_MADT_IOSAPIC, - ACPI_MADT_LSAPIC, - ACPI_MADT_PLAT_INT_SRC, - ACPI_MADT_ENTRY_COUNT -}; - -typedef struct { - u16 polarity:2; - u16 trigger:2; - u16 reserved:12; -} __attribute__ ((packed)) acpi_interrupt_flags; - -struct acpi_table_lapic { - acpi_table_entry_header header; - u8 acpi_id; - u8 id; - struct { - u32 enabled:1; - u32 reserved:31; - } flags; -} __attribute__ ((packed)); - -struct acpi_table_ioapic { - acpi_table_entry_header header; - u8 id; - u8 reserved; - u32 address; - u32 global_irq_base; -} __attribute__ ((packed)); - -struct acpi_table_int_src_ovr { - acpi_table_entry_header header; - u8 bus; - u8 bus_irq; - u32 global_irq; - acpi_interrupt_flags flags; -} __attribute__ ((packed)); - -struct acpi_table_nmi_src { - acpi_table_entry_header header; - acpi_interrupt_flags flags; - u32 global_irq; -} __attribute__ ((packed)); - -struct acpi_table_lapic_nmi { - acpi_table_entry_header header; - u8 acpi_id; - acpi_interrupt_flags flags; - u8 lint; -} __attribute__ ((packed)); - -struct acpi_table_lapic_addr_ovr { - acpi_table_entry_header header; - u8 reserved[2]; - u64 address; -} __attribute__ ((packed)); - -struct acpi_table_iosapic { - acpi_table_entry_header header; - u8 id; - u8 reserved; - u32 global_irq_base; - u64 address; -} __attribute__ ((packed)); - -struct acpi_table_lsapic { - acpi_table_entry_header header; - u8 acpi_id; - u8 id; - u8 eid; - u8 reserved[3]; - struct { - u32 enabled:1; - u32 reserved:31; - } flags; -} __attribute__ ((packed)); - -struct acpi_table_plat_int_src { - acpi_table_entry_header header; - acpi_interrupt_flags flags; - u8 type; /* See acpi_interrupt_type */ - u8 id; - u8 eid; - u8 iosapic_vector; - u32 global_irq; - struct { - u32 cpei_override_flag:1; - u32 reserved:31; - } plint_flags; -} __attribute__ ((packed)); - enum acpi_interrupt_id { ACPI_INTERRUPT_PMI = 1, ACPI_INTERRUPT_INIT, @@ -285,7 +185,7 @@ typedef int (*acpi_table_handler) (struct acpi_table_header *header); extern acpi_table_handler acpi_table_ops[ACPI_TABLE_COUNT]; -typedef int (*acpi_madt_entry_handler) (acpi_table_entry_header *header, const unsigned long end); +typedef int (*acpi_madt_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); char * __acpi_map_table (unsigned long phys_addr, unsigned long size); unsigned long acpi_find_rsdp (void); @@ -295,11 +195,11 @@ int acpi_numa_init (void); int acpi_table_init (void); int acpi_table_parse (char *id, acpi_table_handler handler); -int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries); +int acpi_table_parse_madt (enum acpi_madt_type id, acpi_madt_entry_handler handler, unsigned int max_entries); int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries); int acpi_parse_mcfg (struct acpi_table_header *header); void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr); -void acpi_table_print_madt_entry (acpi_table_entry_header *madt); +void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); void acpi_table_print_srat_entry (acpi_table_entry_header *srat); /* the following four functions are architecture-dependent */ -- cgit v1.2.3 From 15a58ed12142939d51076380e6e58af477ad96ec Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table definitions (non-conflicting), cont Signed-off-by: Len Brown --- include/asm-i386/mach-es7000/mach_mpparse.h | 17 ++-- include/linux/acpi.h | 123 ++-------------------------- 2 files changed, 15 insertions(+), 125 deletions(-) (limited to 'include') diff --git a/include/asm-i386/mach-es7000/mach_mpparse.h b/include/asm-i386/mach-es7000/mach_mpparse.h index 99f66be240b..24990e546da 100644 --- a/include/asm-i386/mach-es7000/mach_mpparse.h +++ b/include/asm-i386/mach-es7000/mach_mpparse.h @@ -3,13 +3,13 @@ #include -static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, +static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, struct mpc_config_translation *translation) { Dprintk("Bus #%d is %s\n", m->mpc_busid, name); } -static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, +static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, struct mpc_config_translation *translation) { } @@ -22,7 +22,7 @@ static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid) { if (mpc->mpc_oemptr) { - struct mp_config_oemtable *oem_table = + struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)mpc->mpc_oemptr; if (!strncmp(oem, "UNISYS", 6)) return parse_unisys_oem((char *)oem_table); @@ -31,12 +31,13 @@ static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, } #ifdef CONFIG_ACPI + static inline int es7000_check_dsdt(void) { - struct acpi_table_header *header = NULL; - if(!acpi_get_table_header_early(ACPI_DSDT, &header)) - acpi_table_print(header, 0); - if (!strncmp(header->oem_id, "UNISYS", 6)) + struct acpi_table_header header; + memcpy(&header, 0, sizeof(struct acpi_table_header)); + acpi_get_table_header(ACPI_SIG_DSDT, 0, &header); + if (!strncmp(header.oem_id, "UNISYS", 6)) return 1; return 0; } @@ -44,7 +45,7 @@ static inline int es7000_check_dsdt(void) /* Hook from generic ACPI tables.c */ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - unsigned long oem_addr; + unsigned long oem_addr; if (!find_unisys_acpi_oem_table(&oem_addr)) { if (es7000_check_dsdt()) return parse_unisys_oem((char *)oem_addr); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fac7a7b1f5f..815f1fb4ce2 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -53,11 +53,6 @@ enum acpi_irq_model_id { extern enum acpi_irq_model_id acpi_irq_model; -typedef struct { - u8 type; - u8 length; -} __attribute__ ((packed)) acpi_table_entry_header; - enum acpi_interrupt_id { ACPI_INTERRUPT_PMI = 1, ACPI_INTERRUPT_INIT, @@ -67,74 +62,6 @@ enum acpi_interrupt_id { #define ACPI_SPACE_MEM 0 -struct acpi_gen_regaddr { - u8 space_id; - u8 bit_width; - u8 bit_offset; - u8 resv; - u32 addrl; - u32 addrh; -} __attribute__ ((packed)); - -/* - * Simple Boot Flags - * http://www.microsoft.com/whdc/hwdev/resources/specs/simp_bios.mspx - */ -struct acpi_table_sbf -{ - u8 sbf_signature[4]; - u32 sbf_len; - u8 sbf_revision; - u8 sbf_csum; - u8 sbf_oemid[6]; - u8 sbf_oemtable[8]; - u8 sbf_revdata[4]; - u8 sbf_creator[4]; - u8 sbf_crearev[4]; - u8 sbf_cmos; - u8 sbf_spare[3]; -} __attribute__ ((packed)); - -/* - * System Resource Affinity Table (SRAT) - * http://www.microsoft.com/whdc/hwdev/platform/proc/SRAT.mspx - */ - -enum acpi_srat_entry_id { - ACPI_SRAT_PROCESSOR_AFFINITY = 0, - ACPI_SRAT_MEMORY_AFFINITY, - ACPI_SRAT_ENTRY_COUNT -}; - -struct acpi_table_processor_affinity { - acpi_table_entry_header header; - u8 proximity_domain; - u8 apic_id; - struct { - u32 enabled:1; - u32 reserved:31; - } flags; - u8 lsapic_eid; - u8 reserved[7]; -} __attribute__ ((packed)); - -struct acpi_table_memory_affinity { - acpi_table_entry_header header; - u8 proximity_domain; - u8 reserved1[5]; - u32 base_addr_lo; - u32 base_addr_hi; - u32 length_lo; - u32 length_hi; - u32 memory_type; /* See acpi_address_range_id */ - struct { - u32 enabled:1; - u32 hot_pluggable:1; - u32 reserved:30; - } flags; - u64 reserved2; -} __attribute__ ((packed)); - enum acpi_address_range_id { ACPI_ADDRESS_RANGE_MEMORY = 1, ACPI_ADDRESS_RANGE_RESERVED = 2, @@ -144,46 +71,9 @@ enum acpi_address_range_id { }; -/* PCI MMCONFIG */ - -/* Defined in PCI Firmware Specification 3.0 */ -struct acpi_table_mcfg_config { - u32 base_address; - u32 base_reserved; - u16 pci_segment_group_number; - u8 start_bus_number; - u8 end_bus_number; - u8 reserved[4]; -} __attribute__ ((packed)); - /* Table Handlers */ -enum acpi_table_id { - ACPI_TABLE_UNKNOWN = 0, - ACPI_APIC, - ACPI_BOOT, - ACPI_DBGP, - ACPI_DSDT, - ACPI_ECDT, - ACPI_ETDT, - ACPI_FADT, - ACPI_FACS, - ACPI_OEMX, - ACPI_PSDT, - ACPI_SBST, - ACPI_SLIT, - ACPI_SPCR, - ACPI_SRAT, - ACPI_SSDT, - ACPI_SPMI, - ACPI_HPET, - ACPI_MCFG, - ACPI_TABLE_COUNT -}; - -typedef int (*acpi_table_handler) (struct acpi_table_header *header); - -extern acpi_table_handler acpi_table_ops[ACPI_TABLE_COUNT]; +typedef int (*acpi_table_handler) (struct acpi_table_header *table); typedef int (*acpi_madt_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); @@ -196,11 +86,10 @@ int acpi_numa_init (void); int acpi_table_init (void); int acpi_table_parse (char *id, acpi_table_handler handler); int acpi_table_parse_madt (enum acpi_madt_type id, acpi_madt_entry_handler handler, unsigned int max_entries); -int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries); +int acpi_table_parse_srat (enum acpi_srat_type id, acpi_madt_entry_handler handler, unsigned int max_entries); int acpi_parse_mcfg (struct acpi_table_header *header); -void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr); void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); -void acpi_table_print_srat_entry (acpi_table_entry_header *srat); +void acpi_table_print_srat_entry (struct acpi_subtable_header *srat); /* the following four functions are architecture-dependent */ #ifdef CONFIG_HAVE_ARCH_PARSE_SRAT @@ -211,8 +100,8 @@ void acpi_table_print_srat_entry (acpi_table_entry_header *srat); #define acpi_numa_arch_fixup() do {} while (0) #else void acpi_numa_slit_init (struct acpi_table_slit *slit); -void acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa); -void acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma); +void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); +void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); void acpi_numa_arch_fixup(void); #endif @@ -227,7 +116,7 @@ int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base); extern int acpi_mp_config; -extern struct acpi_table_mcfg_config *pci_mmcfg_config; +extern struct acpi_mcfg_allocation *pci_mmcfg_config; extern int pci_mmcfg_config_num; extern int sbf_port; -- cgit v1.2.3 From 428f211297bc95fd41f23830eab4180339020dd0 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Miscellaneous table manager updates and optimizations Signed-off-by: Bob Moore Signed-off-by: Len Brown --- include/acpi/acpixf.h | 2 +- include/acpi/actables.h | 8 ++------ 2 files changed, 3 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 9c26400acc4..918280e823d 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -109,7 +109,7 @@ acpi_status acpi_unload_table_id(acpi_owner_id id); acpi_status acpi_get_table_header(acpi_string signature, acpi_native_uint instance, - struct acpi_table_header **out_table_header); + struct acpi_table_header *out_table_header); acpi_status acpi_get_table(acpi_string signature, diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 4079f8a0ea2..5ef1b693937 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -69,7 +69,7 @@ acpi_status acpi_tb_resize_root_table_list(void); acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); acpi_status -acpi_tb_add_table(struct acpi_table_header *table, +acpi_tb_add_table(struct acpi_table_desc *table_desc, acpi_native_uint * table_index); acpi_status @@ -77,7 +77,7 @@ acpi_tb_store_table(acpi_physical_address address, struct acpi_table_header *table, u32 length, u8 flags, acpi_native_uint * table_index); -void acpi_tb_delete_table(acpi_native_uint table_index); +void acpi_tb_delete_table(struct acpi_table_desc *table_desc); void acpi_tb_terminate(void); @@ -113,8 +113,4 @@ acpi_tb_install_table(acpi_physical_address address, acpi_status acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags); -void *acpi_tb_map(acpi_physical_address address, u32 length, u32 flags); - -void acpi_tb_unmap(void *pointer, u32 length, u32 flags); - #endif /* __ACTABLES_H__ */ -- cgit v1.2.3 From a6823e12ca3f79a8c0f8b2d14976ab2152d117e5 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Fixes for load() operator. Optimized the Load operator in the case where the source operand is an operation region. Simply map the operation region memory, instead of performing a bytewise read. Signed-off-by: Bob Moore Signed-off-by: Len Brown --- include/acpi/acopcode.h | 2 +- include/acpi/amlcode.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/acopcode.h b/include/acpi/acopcode.h index 7659a46bc43..d71f5d9db13 100644 --- a/include/acpi/acopcode.h +++ b/include/acpi/acopcode.h @@ -257,7 +257,7 @@ #define ARGI_LLESSEQUAL_OP ARGI_INVALID_OPCODE #define ARGI_LNOT_OP ARGI_LIST1 (ARGI_INTEGER) #define ARGI_LNOTEQUAL_OP ARGI_INVALID_OPCODE -#define ARGI_LOAD_OP ARGI_LIST2 (ARGI_REGION_OR_FIELD,ARGI_TARGETREF) +#define ARGI_LOAD_OP ARGI_LIST2 (ARGI_REGION_OR_BUFFER,ARGI_TARGETREF) #define ARGI_LOAD_TABLE_OP ARGI_LIST6 (ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_ANYTYPE) #define ARGI_LOCAL0 ARG_NONE #define ARGI_LOCAL1 ARG_NONE diff --git a/include/acpi/amlcode.h b/include/acpi/amlcode.h index cf18426a87b..fd0c7228087 100644 --- a/include/acpi/amlcode.h +++ b/include/acpi/amlcode.h @@ -273,7 +273,7 @@ #define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */ #define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */ #define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */ -#define ARGI_REGION_OR_FIELD 0x15 /* Used by LOAD op only */ +#define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */ #define ARGI_DATAREFOBJ 0x16 /* Note: types above can expand to 0x1F maximum */ -- cgit v1.2.3 From 7c9626bade13de3f160f0926455328650045d6cd Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Ensure that all structures in acobject.h are aligned, via #pragma. Thus, even if the default compiler setting is non-aligned, the header is compiled correctly. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acobject.h | 17 +++++++++++++++-- include/acpi/actypes.h | 4 ++++ 2 files changed, 19 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h index 8fdee31119f..b81e9234472 100644 --- a/include/acpi/acobject.h +++ b/include/acpi/acobject.h @@ -52,7 +52,15 @@ * to the interpreter, and to keep track of the various handlers such as * address space handlers and notify handlers. The object is a constant * size in order to allow it to be cached and reused. + * + * Note: The object is optimized to be aligned and will not work if it is + * byte-packed. */ +#if ACPI_MACHINE_WIDTH == 64 +#pragma pack(8) +#else +#pragma pack(4) +#endif /******************************************************************************* * @@ -101,7 +109,8 @@ struct acpi_object_common { ACPI_OBJECT_COMMON_HEADER}; struct acpi_object_integer { - ACPI_OBJECT_COMMON_HEADER acpi_integer value; + ACPI_OBJECT_COMMON_HEADER u8 fill[3]; /* Prevent warning on some compilers */ + acpi_integer value; }; /* @@ -203,7 +212,9 @@ struct acpi_object_power_resource { }; struct acpi_object_processor { - ACPI_OBJECT_COMMON_HEADER u8 proc_id; + ACPI_OBJECT_COMMON_HEADER + /* The next two fields take advantage of the 3-byte space before NOTIFY_INFO */ + u8 proc_id; u8 length; ACPI_COMMON_NOTIFY_INFO acpi_io_address address; }; @@ -406,4 +417,6 @@ union acpi_descriptor { union acpi_parse_object op; }; +#pragma pack() + #endif /* _ACOBJECT_H */ diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 6fa3f2a13db..d213f978215 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -156,6 +156,7 @@ typedef u64 acpi_physical_address; #define ACPI_MAX_PTR ACPI_UINT64_MAX #define ACPI_SIZE_MAX ACPI_UINT64_MAX +#define ACPI_NATIVE_BOUNDARY 8 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ /* @@ -196,6 +197,8 @@ typedef u32 acpi_physical_address; #define ACPI_MAX_PTR ACPI_UINT32_MAX #define ACPI_SIZE_MAX ACPI_UINT32_MAX +#define ACPI_NATIVE_BOUNDARY 4 + /******************************************************************************* * * Types specific to 16-bit targets @@ -222,6 +225,7 @@ typedef char *acpi_physical_address; #define ACPI_MAX_PTR ACPI_UINT16_MAX #define ACPI_SIZE_MAX ACPI_UINT16_MAX +#define ACPI_NATIVE_BOUNDARY 2 #define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */ /* 64-bit integers cannot be supported */ -- cgit v1.2.3 From 987c21a0b0081d480ec3cd04875509cdc10e15e7 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Add ACPI_MAX macro Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acmacros.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index 192fa095a51..9b2e4d7154a 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -55,6 +55,7 @@ #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) +#define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) /* Size calculation */ -- cgit v1.2.3 From c857303ad496e1f52955e95994a67869882e89f9 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Fail AcpiEnable if ACPI tables not loaded. AcpiEnable will now fail if all of the required ACPI tables are not loaded (FADT, FACS, DSDT). BZ 477 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actables.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 5ef1b693937..e7efb8a03a9 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -97,6 +97,8 @@ void acpi_tb_set_table_loaded_flag(acpi_native_uint table_index, u8 is_loaded); /* * tbutils - table manager utilities */ +u8 acpi_tb_tables_loaded(void); + void acpi_tb_print_table_header(acpi_physical_address address, struct acpi_table_header *header); -- cgit v1.2.3 From ff40c8a3f258e9a54b0b94b92d5e2d9d88a39954 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Update version to 20061109 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 9aa3b191f11..755340b96c9 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20061011 +#define ACPI_CA_VERSION 0x20061109 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From 59fa85057e12ff135df54266722b2064c418fc05 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Removed all 16-bit support. Support for 16-bit ACPICA has been completely removed since it is no longer necessary and it clutters the code. All 16-bit macros, types, and conditional compiles have been removed, cleaning up and simplifying the code across the entire subsystem. DOS support is no longer needed since the Linux firmware kit is now available. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acmacros.h | 68 +------------------------------------------------ include/acpi/actypes.h | 40 +---------------------------- 2 files changed, 2 insertions(+), 106 deletions(-) (limited to 'include') diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index 9b2e4d7154a..549e533892a 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -61,20 +61,6 @@ #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) -#if ACPI_MACHINE_WIDTH == 16 - -/* - * For 16-bit addresses, we have to assume that the upper 32 bits - * (out of 64) are zero. - */ -#define ACPI_LODWORD(l) ((u32)(l)) -#define ACPI_HIDWORD(l) ((u32)(0)) - -#define ACPI_GET_ADDRESS(a) ((a).lo) -#define ACPI_STORE_ADDRESS(a,b) {(a).hi=0;(a).lo=(u32)(b);} -#define ACPI_VALID_ADDRESS(a) ((a).hi | (a).lo) - -#else #ifdef ACPI_NO_INTEGER64_SUPPORT /* * acpi_integer is 32-bits, no 64-bit support on this platform @@ -82,10 +68,6 @@ #define ACPI_LODWORD(l) ((u32)(l)) #define ACPI_HIDWORD(l) ((u32)(0)) -#define ACPI_GET_ADDRESS(a) (a) -#define ACPI_STORE_ADDRESS(a,b) ((a)=(b)) -#define ACPI_VALID_ADDRESS(a) (a) - #else /* @@ -93,11 +75,6 @@ */ #define ACPI_LODWORD(l) ((u32)(u64)(l)) #define ACPI_HIDWORD(l) ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi)) - -#define ACPI_GET_ADDRESS(a) (a) -#define ACPI_STORE_ADDRESS(a,b) ((a)=(acpi_physical_address)(b)) -#define ACPI_VALID_ADDRESS(a) (a) -#endif #endif /* @@ -135,15 +112,8 @@ #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i) #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL) #define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL) - -#if ACPI_MACHINE_WIDTH == 16 -#define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s) -#define ACPI_PHYSADDR_TO_PTR(i) (void *)(i) -#define ACPI_PTR_TO_PHYSADDR(i) (u32) ACPI_CAST_PTR (u8,(i)) -#else #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) -#endif #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b))) @@ -224,28 +194,6 @@ /* The hardware supports unaligned transfers, just do the little-endian move */ -#if ACPI_MACHINE_WIDTH == 16 - -/* No 64-bit integers */ -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_64(d,s) ACPI_MOVE_16_TO_32(d,s) - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ -#define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s) -#define ACPI_MOVE_32_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s) - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s) - -#else /* 16-bit source, 16/32/64 destination */ #define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) @@ -263,7 +211,6 @@ #define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ #define ACPI_MOVE_64_TO_64(d,s) *(u64 *)(void *)(d) = *(u64 *)(void *)(s) -#endif #else /* @@ -308,10 +255,7 @@ /* Macros based on machine integer width */ -#if ACPI_MACHINE_WIDTH == 16 -#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) - -#elif ACPI_MACHINE_WIDTH == 32 +#if ACPI_MACHINE_WIDTH == 32 #define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_32_TO_16(d,s) #elif ACPI_MACHINE_WIDTH == 64 @@ -696,16 +640,6 @@ #define ACPI_DEBUGGER_EXEC(a) #endif -/* - * For 16-bit code, we want to shrink some things even though - * we are using ACPI_DEBUG_OUTPUT to get the debug output - */ -#if ACPI_MACHINE_WIDTH == 16 -#undef ACPI_DEBUG_ONLY_MEMBERS -#undef _VERBOSE_STRUCTURES -#define ACPI_DEBUG_ONLY_MEMBERS(a) -#endif - #ifdef ACPI_DEBUG_OUTPUT /* * 1) Set name to blanks diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index d213f978215..fff2d242ace 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -149,14 +149,12 @@ typedef int INT32; typedef u64 acpi_native_uint; typedef s64 acpi_native_int; -typedef u64 acpi_table_ptr; typedef u64 acpi_io_address; typedef u64 acpi_physical_address; #define ACPI_MAX_PTR ACPI_UINT64_MAX #define ACPI_SIZE_MAX ACPI_UINT64_MAX -#define ACPI_NATIVE_BOUNDARY 8 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ /* @@ -190,51 +188,15 @@ typedef int INT32; typedef u32 acpi_native_uint; typedef s32 acpi_native_int; -typedef u64 acpi_table_ptr; typedef u32 acpi_io_address; typedef u32 acpi_physical_address; #define ACPI_MAX_PTR ACPI_UINT32_MAX #define ACPI_SIZE_MAX ACPI_UINT32_MAX -#define ACPI_NATIVE_BOUNDARY 4 - -/******************************************************************************* - * - * Types specific to 16-bit targets - * - ******************************************************************************/ - -#elif ACPI_MACHINE_WIDTH == 16 - -/*! [Begin] no source code translation (keep the typedefs as-is) */ - -typedef unsigned long UINT32; -typedef short INT16; -typedef long INT32; - -/*! [End] no source code translation !*/ - -typedef u16 acpi_native_uint; -typedef s16 acpi_native_int; - -typedef u32 acpi_table_ptr; -typedef u32 acpi_io_address; -typedef char *acpi_physical_address; - -#define ACPI_MAX_PTR ACPI_UINT16_MAX -#define ACPI_SIZE_MAX ACPI_UINT16_MAX - -#define ACPI_NATIVE_BOUNDARY 2 -#define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */ - -/* 64-bit integers cannot be supported */ - -#define ACPI_NO_INTEGER64_SUPPORT - #else -/* ACPI_MACHINE_WIDTH must be either 64, 32, or 16 */ +/* ACPI_MACHINE_WIDTH must be either 64 or 32 */ #error unknown ACPI_MACHINE_WIDTH #endif -- cgit v1.2.3 From 2e23f8513e9d0cc6d07d36e4555badc2518df433 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Debugger multithreading enhancements. Implemented enhancements to the multithreading support within the debugger to enable better multithreading evaluation of the subsystem. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acdebug.h | 2 ++ include/acpi/aclocal.h | 22 ++++++++++++++++++++-- 2 files changed, 22 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/acdebug.h b/include/acpi/acdebug.h index d8167095caf..47296ffef7d 100644 --- a/include/acpi/acdebug.h +++ b/include/acpi/acdebug.h @@ -214,4 +214,6 @@ void acpi_db_prep_namestring(char *name); struct acpi_namespace_node *acpi_db_local_ns_lookup(char *name); +void acpi_db_uint32_to_hex_string(u32 value, char *buffer); + #endif /* __ACDEBUG_H__ */ diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index 7b28d935145..9b7e05c8759 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -872,12 +872,30 @@ struct acpi_bit_register_info { ****************************************************************************/ struct acpi_db_method_info { - acpi_handle thread_gate; + acpi_handle main_thread_gate; + acpi_handle thread_complete_gate; + u32 *threads; + u32 num_threads; + u32 num_created; + u32 num_completed; + char *name; - char **args; u32 flags; u32 num_loops; char pathname[128]; + char **args; + + /* + * Arguments to be passed to method for the command + * Threads - + * the Number of threads, ID of current thread and + * Index of current thread inside all them created. + */ + char init_args; + char *arguments[4]; + char num_threads_str[11]; + char id_of_thread_str[11]; + char index_of_thread_str[11]; }; struct acpi_integrity_info { -- cgit v1.2.3 From ea5415785146afe37dd2d1179a6c3a34fd26b52f Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Update a comment. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/actypes.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index fff2d242ace..ee1a11802b6 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -48,7 +48,8 @@ /* * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header - * and must be either 16, 32, or 64 + * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of + * 12/2006. */ #ifndef ACPI_MACHINE_WIDTH #error ACPI_MACHINE_WIDTH not defined -- cgit v1.2.3 From afbb9e659d584bd5bf0604848c91afd5761ed7a1 Mon Sep 17 00:00:00 2001 From: "Valery A. Podrezov" Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Enhance debugger statistics/memory command. Debugger: Enhanced the Statistics/Memory command to emit the total (maximum) memory used during execution, as well as the maximum memory consumed by each of the various object types. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acdebug.h | 4 ++++ include/acpi/aclocal.h | 2 ++ 2 files changed, 6 insertions(+) (limited to 'include') diff --git a/include/acpi/acdebug.h b/include/acpi/acdebug.h index 47296ffef7d..c46a33abe45 100644 --- a/include/acpi/acdebug.h +++ b/include/acpi/acdebug.h @@ -159,6 +159,10 @@ void acpi_db_create_execution_threads(char *num_threads_arg, char *num_loops_arg, char *method_name_arg); +#ifdef ACPI_DBG_TRACK_ALLOCATIONS +u32 acpi_db_get_cache_info(struct acpi_memory_list *cache); +#endif + /* * dbfileio - Debugger file I/O commands */ diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index 9b7e05c8759..e135dab905f 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -954,6 +954,8 @@ struct acpi_memory_list { u32 total_allocated; u32 total_freed; + u32 max_occupied; + u32 total_size; u32 current_total_size; u32 requests; u32 hits; -- cgit v1.2.3 From d41eb99bac4063aa3fac2dbb8ca01bedd9f0b3bf Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Added option to display memory statistics upon termination. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acglobal.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index d1a5363ffc4..5b5d43747b9 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -200,6 +200,7 @@ ACPI_EXTERN spinlock_t _acpi_gbl_hardware_lock; /* For ACPI H/W except GPE regis ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list; ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list; +ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats; #endif /* Object caches */ -- cgit v1.2.3 From 5008740e27540e4069a2f8235f8308aba46036a2 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Update version to 20061215 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 755340b96c9..aaa281373b8 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20061109 +#define ACPI_CA_VERSION 0x20061215 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From f18c5a08bf035b51939281f5b49aa3ae45cea6ce Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Allow ACPI id to be u32 instead of u8. Allow ACPI id to be u32 instead of u8. Requires drop of conversion tables with the acpiid as index. Signed-off-by: Len Brown --- include/asm-i386/acpi.h | 16 +++++++--------- include/asm-ia64/acpi.h | 2 -- include/asm-x86_64/acpi.h | 16 +++++++--------- 3 files changed, 14 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h index 0fb0c016db7..5e657eb8946 100644 --- a/include/asm-i386/acpi.h +++ b/include/asm-i386/acpi.h @@ -39,7 +39,7 @@ * Calling conventions: * * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads) - * ACPI_EXTERNAL_XFACE - External ACPI interfaces + * ACPI_EXTERNAL_XFACE - External ACPI interfaces * ACPI_INTERNAL_XFACE - Internal ACPI interfaces * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces */ @@ -87,7 +87,7 @@ extern void check_acpi_pci(void); static inline void check_acpi_pci(void) { } #endif -#ifdef CONFIG_ACPI +#ifdef CONFIG_ACPI extern int acpi_lapic; extern int acpi_ioapic; extern int acpi_noirq; @@ -95,9 +95,9 @@ extern int acpi_strict; extern int acpi_disabled; extern int acpi_ht; extern int acpi_pci_disabled; -static inline void disable_acpi(void) -{ - acpi_disabled = 1; +static inline void disable_acpi(void) +{ + acpi_disabled = 1; acpi_ht = 0; acpi_pci_disabled = 1; acpi_noirq = 1; @@ -114,9 +114,9 @@ extern int acpi_use_timer_override; #endif static inline void acpi_noirq_set(void) { acpi_noirq = 1; } -static inline void acpi_disable_pci(void) +static inline void acpi_disable_pci(void) { - acpi_pci_disabled = 1; + acpi_pci_disabled = 1; acpi_noirq_set(); } extern int acpi_irq_balance_set(char *str); @@ -144,8 +144,6 @@ extern void acpi_reserve_bootmem(void); #endif /*CONFIG_ACPI_SLEEP*/ -extern u8 x86_acpiid_to_apicid[]; - #define ARCH_HAS_POWER_INIT 1 #endif /*__KERNEL__*/ diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h index dba34d5a092..5d03792d4f6 100644 --- a/include/asm-ia64/acpi.h +++ b/include/asm-ia64/acpi.h @@ -119,8 +119,6 @@ extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS]; extern int __initdata nid_to_pxm_map[MAX_NUMNODES]; #endif -extern u16 ia64_acpiid_to_sapicid[]; - /* * Refer Intel ACPI _PDC support document for bit definitions */ diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h index 49f92f3cc32..a29f05087a3 100644 --- a/include/asm-x86_64/acpi.h +++ b/include/asm-x86_64/acpi.h @@ -37,7 +37,7 @@ * Calling conventions: * * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads) - * ACPI_EXTERNAL_XFACE - External ACPI interfaces + * ACPI_EXTERNAL_XFACE - External ACPI interfaces * ACPI_INTERNAL_XFACE - Internal ACPI interfaces * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces */ @@ -87,10 +87,10 @@ extern int acpi_strict; extern int acpi_disabled; extern int acpi_pci_disabled; extern int acpi_ht; -static inline void disable_acpi(void) -{ - acpi_disabled = 1; - acpi_ht = 0; +static inline void disable_acpi(void) +{ + acpi_disabled = 1; + acpi_ht = 0; acpi_pci_disabled = 1; acpi_noirq = 1; } @@ -100,9 +100,9 @@ static inline void disable_acpi(void) extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq); static inline void acpi_noirq_set(void) { acpi_noirq = 1; } -static inline void acpi_disable_pci(void) +static inline void acpi_disable_pci(void) { - acpi_pci_disabled = 1; + acpi_pci_disabled = 1; acpi_noirq_set(); } extern int acpi_irq_balance_set(char *str); @@ -136,8 +136,6 @@ extern void acpi_reserve_bootmem(void); extern int acpi_disabled; extern int acpi_pci_disabled; -extern u8 x86_acpiid_to_apicid[]; - #define ARCH_HAS_POWER_INIT 1 extern int acpi_skip_timer_override; -- cgit v1.2.3 From 11bf04c44fd284a5f4e2348a04da6f749cace250 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Allow processor to be declared with the Device() instead of Processor() Allow processor to be declered with the Device(), such as: Device(CPU1234) { Name(_HID, "ACPI007") Name(_UID, 1234) } Signed-off-by: Len Brown --- include/acpi/acpi_drivers.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 6a5bdcefec6..baaa734b109 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -37,7 +37,7 @@ /* _HID definitions */ #define ACPI_POWER_HID "ACPI_PWR" -#define ACPI_PROCESSOR_HID "ACPI_CPU" +#define ACPI_PROCESSOR_HID "ACPI0007" #define ACPI_SYSTEM_HID "ACPI_SYS" #define ACPI_THERMAL_HID "ACPI_THM" #define ACPI_BUTTON_HID_POWERF "ACPI_FPB" -- cgit v1.2.3 From 6c9deb7201d96733dcd1b4cc44e99232308db359 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:24 +0300 Subject: ACPICA: Update copyright to 2007. Added 2007 copyright to all module headers and signons. This affects virtually every file in the ACPICA core subsystem, iASL compiler, and the utilities. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- include/acpi/acdebug.h | 2 +- include/acpi/acdisasm.h | 2 +- include/acpi/acdispat.h | 2 +- include/acpi/acevents.h | 2 +- include/acpi/acexcep.h | 2 +- include/acpi/acglobal.h | 2 +- include/acpi/achware.h | 2 +- include/acpi/acinterp.h | 2 +- include/acpi/aclocal.h | 2 +- include/acpi/acmacros.h | 2 +- include/acpi/acnames.h | 2 +- include/acpi/acnamesp.h | 2 +- include/acpi/acobject.h | 2 +- include/acpi/acopcode.h | 2 +- include/acpi/acoutput.h | 2 +- include/acpi/acparser.h | 2 +- include/acpi/acpi.h | 2 +- include/acpi/acpiosxf.h | 2 +- include/acpi/acpixf.h | 2 +- include/acpi/acresrc.h | 2 +- include/acpi/acstruct.h | 2 +- include/acpi/actables.h | 2 +- include/acpi/actbl.h | 2 +- include/acpi/actbl1.h | 2 +- include/acpi/actypes.h | 2 +- include/acpi/acutils.h | 2 +- include/acpi/amlcode.h | 2 +- include/acpi/amlresrc.h | 2 +- include/acpi/platform/acenv.h | 2 +- include/acpi/platform/acgcc.h | 2 +- include/acpi/platform/aclinux.h | 2 +- 32 files changed, 32 insertions(+), 32 deletions(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index aaa281373b8..ade404fc63c 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acdebug.h b/include/acpi/acdebug.h index c46a33abe45..d626bb1d297 100644 --- a/include/acpi/acdebug.h +++ b/include/acpi/acdebug.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h index ea35f1f8e28..389d772c7d5 100644 --- a/include/acpi/acdisasm.h +++ b/include/acpi/acdisasm.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h index f0272d41d96..cb8d2868c8a 100644 --- a/include/acpi/acdispat.h +++ b/include/acpi/acdispat.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acevents.h b/include/acpi/acevents.h index 234142828e1..d23cdf32680 100644 --- a/include/acpi/acevents.h +++ b/include/acpi/acevents.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 8fa00e8b17f..b73f18a4878 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 5b5d43747b9..24c3f05ab36 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/achware.h b/include/acpi/achware.h index ae449f235cf..9df275cf7bc 100644 --- a/include/acpi/achware.h +++ b/include/acpi/achware.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h index 8aebe579316..ce7c9d65391 100644 --- a/include/acpi/acinterp.h +++ b/include/acpi/acinterp.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index e135dab905f..6f83ddbed3a 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index 549e533892a..8948a646183 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h index b67da363689..34bfae8a05f 100644 --- a/include/acpi/acnames.h +++ b/include/acpi/acnames.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h index 19a61292af6..535b7e1c41b 100644 --- a/include/acpi/acnamesp.h +++ b/include/acpi/acnamesp.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h index b81e9234472..04e9735a674 100644 --- a/include/acpi/acobject.h +++ b/include/acpi/acobject.h @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acopcode.h b/include/acpi/acopcode.h index d71f5d9db13..e6f76a280a9 100644 --- a/include/acpi/acopcode.h +++ b/include/acpi/acopcode.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h index 8d5039d0b43..7812267b577 100644 --- a/include/acpi/acoutput.h +++ b/include/acpi/acoutput.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acparser.h b/include/acpi/acparser.h index 9d49d3c41cd..85c358e2101 100644 --- a/include/acpi/acparser.h +++ b/include/acpi/acparser.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h index b9a39d1009b..2e5f00d3ea0 100644 --- a/include/acpi/acpi.h +++ b/include/acpi/acpi.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 9a5ffcf88f5..781394b9efe 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -8,7 +8,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 918280e823d..e08f7df85a4 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acresrc.h b/include/acpi/acresrc.h index 80a3b33571b..9486ab266a5 100644 --- a/include/acpi/acresrc.h +++ b/include/acpi/acresrc.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h index 9c800b6cd8c..aeb4498e5e0 100644 --- a/include/acpi/acstruct.h +++ b/include/acpi/acstruct.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/actables.h b/include/acpi/actables.h index e7efb8a03a9..2b9f46f9da4 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index d6af14e1c7e..09469e7db6a 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index b7178ebfe3e..4e5d3ca53a8 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index ee1a11802b6..72a6e2c3a53 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h index ba7d7e9c9b8..883ffe92148 100644 --- a/include/acpi/acutils.h +++ b/include/acpi/acutils.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/amlcode.h b/include/acpi/amlcode.h index fd0c7228087..da53a4ef287 100644 --- a/include/acpi/amlcode.h +++ b/include/acpi/amlcode.h @@ -7,7 +7,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/amlresrc.h b/include/acpi/amlresrc.h index be03818af9d..f7d541239da 100644 --- a/include/acpi/amlresrc.h +++ b/include/acpi/amlresrc.h @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h index 453a469fd39..dab2ec59a3b 100644 --- a/include/acpi/platform/acenv.h +++ b/include/acpi/platform/acenv.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h index da80933963d..3bb50494a38 100644 --- a/include/acpi/platform/acgcc.h +++ b/include/acpi/platform/acgcc.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 7f1e92930b6..5f532d2ac18 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2006, R. Byron Moore + * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without -- cgit v1.2.3 From 5763d3c7a0c2b165504954b1eeb898fb8d97d8f5 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 2 Feb 2007 19:48:24 +0300 Subject: ACPICA: Update version to 20070126 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index ade404fc63c..422f29c06c7 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20061215 +#define ACPI_CA_VERSION 0x20070126 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From 647fb47dfabeffd2f1706013ebf5cfc92b70d273 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 2 Feb 2007 22:14:22 -0500 Subject: ACPICA: reduce conflicts with Altix patch series Syntax only -- no functional changes. Signed-off-by: Len Brown --- include/asm-ia64/sn/acpi.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/asm-ia64/sn/acpi.h (limited to 'include') diff --git a/include/asm-ia64/sn/acpi.h b/include/asm-ia64/sn/acpi.h new file mode 100644 index 00000000000..7d6cb3b686e --- /dev/null +++ b/include/asm-ia64/sn/acpi.h @@ -0,0 +1,18 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_ACPI_H +#define _ASM_IA64_SN_ACPI_H + +#include "acpi/acglobal.h" + +#define SN_ACPI_BASE_SUPPORT() sn_acpi_base_support() + +extern int sn_acpi_base_support(void); + +#endif /* _ASM_IA64_SN_ACPI_H */ -- cgit v1.2.3 From 6f09a9250a5d76c0765cd51a33e0a042e9761cfc Mon Sep 17 00:00:00 2001 From: John Keller Date: Tue, 30 Jan 2007 01:17:37 -0500 Subject: Altix: ACPI SSDT PCI device support Add SN platform support for running with an ACPI capable PROM that defines PCI devices in SSDT tables. There is a SSDT table for every occupied slot on a root bus, containing info for every PPB and/or device on the bus. The SSDTs will be dynamically loaded/unloaded at hotplug enable/disable. Platform specific information that is currently passed via a SAL call, will now be passed via the Vendor resource in the ACPI Device object(s) defined in each SSDT. Signed-off-by: John Keller Cc: Greg KH Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/asm-ia64/sn/acpi.h | 5 ++--- include/asm-ia64/sn/pcibr_provider.h | 2 +- include/asm-ia64/sn/pcidev.h | 8 +++++++- 3 files changed, 10 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-ia64/sn/acpi.h b/include/asm-ia64/sn/acpi.h index 7d6cb3b686e..9ce2801cbd5 100644 --- a/include/asm-ia64/sn/acpi.h +++ b/include/asm-ia64/sn/acpi.h @@ -11,8 +11,7 @@ #include "acpi/acglobal.h" -#define SN_ACPI_BASE_SUPPORT() sn_acpi_base_support() - -extern int sn_acpi_base_support(void); +extern int sn_acpi_rev; +#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101) #endif /* _ASM_IA64_SN_ACPI_H */ diff --git a/include/asm-ia64/sn/pcibr_provider.h b/include/asm-ia64/sn/pcibr_provider.h index da3eade0cae..17cb6cc3f21 100644 --- a/include/asm-ia64/sn/pcibr_provider.h +++ b/include/asm-ia64/sn/pcibr_provider.h @@ -142,7 +142,7 @@ extern int pcibr_ate_alloc(struct pcibus_info *, int); extern void pcibr_ate_free(struct pcibus_info *, int); extern void ate_write(struct pcibus_info *, int, int, u64); extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device, - void *resp); + void *resp, char **ssdt); extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device, int action, void *resp); extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus); diff --git a/include/asm-ia64/sn/pcidev.h b/include/asm-ia64/sn/pcidev.h index 9fe89a93d88..1c2382cea80 100644 --- a/include/asm-ia64/sn/pcidev.h +++ b/include/asm-ia64/sn/pcidev.h @@ -70,10 +70,16 @@ extern void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info); extern void sn_irq_unfixup(struct pci_dev *pci_dev); extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *); +extern void sn_bus_fixup(struct pci_bus *); +extern void sn_acpi_bus_fixup(struct pci_bus *); +extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *); extern void sn_bus_store_sysdata(struct pci_dev *dev); extern void sn_bus_free_sysdata(void); extern void sn_generate_path(struct pci_bus *pci_bus, char *address); -extern void sn_pci_fixup_slot(struct pci_dev *dev); +extern void sn_io_slot_fixup(struct pci_dev *); +extern void sn_acpi_slot_fixup(struct pci_dev *); +extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *, + struct sn_irq_info *); extern void sn_pci_unfixup_slot(struct pci_dev *dev); extern void sn_irq_lh_init(void); #endif /* _ASM_IA64_SN_PCI_PCIDEV_H */ -- cgit v1.2.3 From 8560a10e16faccafdc2e26c4873bf4edfbbf651e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 3 Feb 2007 01:13:55 -0800 Subject: [PATCH] alpha: fix epoll syscall enumerations We went and named them __NR_sys_foo instead of __NR_foo. It may be too late to change this, but we can at least add the proper names now. Signed-off-by: Mike Frysinger Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-alpha/unistd.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-alpha/unistd.h b/include/asm-alpha/unistd.h index 84313d14e78..e58a427012d 100644 --- a/include/asm-alpha/unistd.h +++ b/include/asm-alpha/unistd.h @@ -342,9 +342,14 @@ #define __NR_io_cancel 402 #define __NR_exit_group 405 #define __NR_lookup_dcookie 406 -#define __NR_sys_epoll_create 407 -#define __NR_sys_epoll_ctl 408 -#define __NR_sys_epoll_wait 409 +#define __NR_epoll_create 407 +#define __NR_epoll_ctl 408 +#define __NR_epoll_wait 409 +/* Feb 2007: These three sys_epoll defines shouldn't be here but culling + * them would break userspace apps ... we'll kill them off in 2010 :) */ +#define __NR_sys_epoll_create __NR_epoll_create +#define __NR_sys_epoll_ctl __NR_epoll_ctl +#define __NR_sys_epoll_wait __NR_epoll_wait #define __NR_remap_file_pages 410 #define __NR_set_tid_address 411 #define __NR_restart_syscall 412 -- cgit v1.2.3 From 259886a7c4e4eb0089181e800d1f477cb3786875 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 3 Feb 2007 01:14:03 -0800 Subject: [PATCH] x86-64: define dma noncoherent API functions x86-64 is missing these: Signed-off-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-x86_64/dma-mapping.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-x86_64/dma-mapping.h b/include/asm-x86_64/dma-mapping.h index be9ec689072..49dbab09ef2 100644 --- a/include/asm-x86_64/dma-mapping.h +++ b/include/asm-x86_64/dma-mapping.h @@ -63,6 +63,9 @@ static inline int dma_mapping_error(dma_addr_t dma_addr) return (dma_addr == bad_dma_address); } +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + extern void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); extern void dma_free_coherent(struct device *dev, size_t size, void *vaddr, -- cgit v1.2.3 From f22ee4edf63e7480511112d9965c71e07be3f8b7 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 26 Dec 2006 15:11:23 +0100 Subject: mmc: replace host->card_busy As card_busy was only used to indicate if the host was exclusively claimed and not really used to identify a particular card, replacing it with just a boolean makes things a lot more easily understandable. Signed-off-by: Pierre Ossman --- include/linux/mmc/host.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index c15ae1986b9..dc4c6e39519 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -106,8 +106,9 @@ struct mmc_host { struct list_head cards; /* devices attached to this host */ wait_queue_head_t wq; - spinlock_t lock; /* card_busy lock */ - struct mmc_card *card_busy; /* the MMC card claiming host */ + spinlock_t lock; /* claimed lock */ + unsigned int claimed:1; /* host exclusively claimed */ + struct mmc_card *card_selected; /* the selected MMC card */ struct delayed_work detect; -- cgit v1.2.3 From 11354d03afe9dd0d114e078057158baad4b4eee9 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 14 Jan 2007 01:41:45 +0100 Subject: mmc: let host be parent of cards Change the parent of cards to be a specific host (a class device), not the physical controller. This is particularly useful when the hardware has multiple slots, meaning multiple hosts. Signed-off-by: Pierre Ossman --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index dc4c6e39519..ae98d6766bd 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -127,6 +127,7 @@ static inline void *mmc_priv(struct mmc_host *host) } #define mmc_dev(x) ((x)->parent) +#define mmc_classdev(x) (&(x)->class_dev) #define mmc_hostname(x) ((x)->class_dev.bus_id) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); -- cgit v1.2.3 From 9e9dc5f29f2eb65153a15c4fdb12b4382e3a75b2 Mon Sep 17 00:00:00 2001 From: Darren Salt Date: Sat, 27 Jan 2007 15:32:31 +0100 Subject: mmc: Power quirk for ENE controllers Support for these devices was broken for 2.6.18-rc1 and later by commit 146ad66eac836c0b976c98f428d73e1f6a75270d, which added voltage level support. This restores the previous behaviour for these devices by ensuring that when the voltage is changed, only one write to set the voltage is performed. It may be that both writes are needed if the voltage is being changed between two non-zero values or that it's safe to ensure that only one write is done if the hardware only supports one voltage; I don't know whether either is the case nor can I test since I have only the one SD reader (1524:0550), and it supports just the one voltage. Signed-off-by: Darren Salt Signed-off-by: Pierre Ossman --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3d1d21035de..d37f46aaaea 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1971,6 +1971,7 @@ #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 #define PCI_VENDOR_ID_ENE 0x1524 +#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550 #define PCI_DEVICE_ID_ENE_1211 0x1211 #define PCI_DEVICE_ID_ENE_1225 0x1225 #define PCI_DEVICE_ID_ENE_1410 0x1410 -- cgit v1.2.3 From fba68bd2dab1ac99af3c5a963ec9581cfa9f1725 Mon Sep 17 00:00:00 2001 From: Philip Langdale Date: Thu, 4 Jan 2007 06:57:32 -0800 Subject: mmc: Add support for SDHC cards Thanks to the generous donation of an SDHC card by John Gilmore, and the surprisingly enlightened decision by the SD Card Association to publish useful specs, I've been able to bash out support for SDHC. The changes are not too profound: i) Add a card flag indicating the card uses block level addressing and check it in the block driver. As we never took advantage of byte-level addressing, this simply involves skipping the block -> byte translation when sending commands. ii) The layout of the CSD is changed - a set of fields are discarded to make space for a larger C_SIZE. We did not reference any of the discarded fields except those related to the C_SIZE. iii) Read and write timeouts are fixed values and not calculated from CSD values. iv) Before invoking SEND_APP_OP_COND, we must invoke the new SEND_IF_COND to inform the card we support SDHC. Signed-off-by: Philipl Langdale Signed-off-by: Pierre Ossman --- include/linux/mmc/card.h | 3 +++ include/linux/mmc/mmc.h | 1 + include/linux/mmc/protocol.h | 13 ++++++++++++- 3 files changed, 16 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index d0e6a549761..e45712acfac 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -71,6 +71,7 @@ struct mmc_card { #define MMC_STATE_SDCARD (1<<3) /* is an SD card */ #define MMC_STATE_READONLY (1<<4) /* card is read-only */ #define MMC_STATE_HIGHSPEED (1<<5) /* card is in high speed mode */ +#define MMC_STATE_BLOCKADDR (1<<6) /* card uses block-addressing */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ u32 raw_scr[2]; /* raw card SCR */ @@ -87,6 +88,7 @@ struct mmc_card { #define mmc_card_sd(c) ((c)->state & MMC_STATE_SDCARD) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) +#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_dead(c) ((c)->state |= MMC_STATE_DEAD) @@ -94,6 +96,7 @@ struct mmc_card { #define mmc_card_set_sd(c) ((c)->state |= MMC_STATE_SDCARD) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) +#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) ((c)->dev.bus_id) diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index bcf24909d67..cdc54be804f 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -43,6 +43,7 @@ struct mmc_command { #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) #define MMC_RSP_R3 (MMC_RSP_PRESENT) #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE)) diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h index 2dce60c43f4..c90b6768329 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/protocol.h @@ -79,9 +79,12 @@ #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ /* SD commands type argument response */ - /* class 8 */ + /* class 0 */ /* This is basically the same command as for MMC with some quirks. */ #define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ +#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */ + + /* class 10 */ #define SD_SWITCH 6 /* adtc [31:0] See below R1 */ /* Application commands */ @@ -114,6 +117,14 @@ * [3:0] Function group 1 */ +/* + * SD_SEND_IF_COND argument format: + * + * [31:12] Reserved (0) + * [11:8] Host Voltage Supply Flags + * [7:0] Check Pattern (0xAA) + */ + /* MMC status in R1 Type -- cgit v1.2.3 From 8e02f8581cd2f9c12a03be7641d5c2c427170feb Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Fri, 8 Dec 2006 16:50:51 +1100 Subject: tifm_sd: restructure initialization, removal and command handling In order to support correct suspend and resume several changes were needed: 1. Switch from work_struct to tasklet for command handling. When device suspend is called workqueues are already frozen and can not be used. 2. Separate host initialization code from driver's probe and don't rely on interrupts for host initialization. This, in turn, addresses two problems: a) Resume needs to re-initialize the host, but can not assume that device interrupts were already re-armed. b) Previously, probe will return successfully before really knowing the state of the host, as host interrupts were not armed in time. Now it uses polling to determine the real host state before returning. 3. Separate termination code from driver's remove. Termination may be caused by resume, if media changed type or became unavailable during suspend. Signed-off-by: Alex Dubov Signed-off-by: Pierre Ossman --- include/linux/tifm.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/tifm.h b/include/linux/tifm.h index dfb8052eee5..9caa28e2a63 100644 --- a/include/linux/tifm.h +++ b/include/linux/tifm.h @@ -89,8 +89,7 @@ struct tifm_dev { char __iomem *addr; spinlock_t lock; tifm_media_id media_id; - char wq_name[KOBJ_NAME_LEN]; - struct workqueue_struct *wq; + unsigned int socket_id; unsigned int (*signal_irq)(struct tifm_dev *sock, unsigned int sock_irq_status); @@ -132,7 +131,7 @@ void tifm_free_device(struct device *dev); void tifm_free_adapter(struct tifm_adapter *fm); int tifm_add_adapter(struct tifm_adapter *fm); void tifm_remove_adapter(struct tifm_adapter *fm); -struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm, unsigned int id); +struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm); int tifm_register_driver(struct tifm_driver *drv); void tifm_unregister_driver(struct tifm_driver *drv); void tifm_eject(struct tifm_dev *sock); -- cgit v1.2.3 From 50743f4cb1d655c7fbe25af58a9d0db6bf76d687 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Mon, 11 Dec 2006 01:55:30 +1100 Subject: Remove unused return value from signal_irq callback Signed-off-by: Alex Dubov Signed-off-by: Pierre Ossman --- include/linux/tifm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/tifm.h b/include/linux/tifm.h index 9caa28e2a63..5b0baef4e61 100644 --- a/include/linux/tifm.h +++ b/include/linux/tifm.h @@ -91,7 +91,7 @@ struct tifm_dev { tifm_media_id media_id; unsigned int socket_id; - unsigned int (*signal_irq)(struct tifm_dev *sock, + void (*signal_irq)(struct tifm_dev *sock, unsigned int sock_irq_status); struct tifm_driver *drv; -- cgit v1.2.3 From 6412d927313f08808d61b7efba8da43717d4e8d2 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Mon, 11 Dec 2006 01:55:33 +1100 Subject: tifm_7xx1: Merge media insert and media remove functions Hardware does not say whether card was inserted or removed when reporting socket events. Moreover, during suspend, media can be removed or switched to some other card type without notification. Therefore, for each socket in the change set the following is performed: 1. If there's active device in the socket it's unregistered 2. Media detection is performed 3. If detection recognizes supportable media, new device is registered This patch also alters some macros and variable names to enhance clarity. Signed-off-by: Alex Dubov Signed-off-by: Pierre Ossman --- include/linux/tifm.h | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/linux/tifm.h b/include/linux/tifm.h index 5b0baef4e61..eaf9e1f4878 100644 --- a/include/linux/tifm.h +++ b/include/linux/tifm.h @@ -62,11 +62,10 @@ enum { #define TIFM_IRQ_ENABLE 0x80000000 -#define TIFM_IRQ_SOCKMASK 0x00000001 -#define TIFM_IRQ_CARDMASK 0x00000100 -#define TIFM_IRQ_FIFOMASK 0x00010000 +#define TIFM_IRQ_SOCKMASK(x) (x) +#define TIFM_IRQ_CARDMASK(x) ((x) << 8) +#define TIFM_IRQ_FIFOMASK(x) ((x) << 16) #define TIFM_IRQ_SETALL 0xffffffff -#define TIFM_IRQ_SETALLSOCK 0x0000000f #define TIFM_CTRL_LED 0x00000040 #define TIFM_CTRL_FAST_CLK 0x00000100 @@ -108,18 +107,16 @@ struct tifm_driver { struct tifm_adapter { char __iomem *addr; - unsigned int irq_status; - unsigned int insert_mask; - unsigned int remove_mask; spinlock_t lock; + unsigned int irq_status; + unsigned int socket_change_set; unsigned int id; - unsigned int max_sockets; + unsigned int num_sockets; + struct tifm_dev **sockets; char wq_name[KOBJ_NAME_LEN]; unsigned int inhibit_new_cards; struct workqueue_struct *wq; - struct work_struct media_inserter; - struct work_struct media_remover; - struct tifm_dev **sockets; + struct work_struct media_switcher; struct class_device cdev; struct device *dev; -- cgit v1.2.3 From 7146f0d3bd2bcd0100a5db54f4ba9edc1042fe01 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Mon, 18 Dec 2006 14:20:06 +1100 Subject: tifm_7xx1: switch from workqueue to kthread As there's only one work item (media_switcher) to handle and it's effectively serialized with itself, I found it more convenient to use kthread instead of workqueue. This also allows for a working implementation of suspend/resume, which were totally broken in the past version. Signed-off-by: Alex Dubov Signed-off-by: Pierre Ossman --- include/linux/tifm.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/tifm.h b/include/linux/tifm.h index eaf9e1f4878..e5a8295f9fb 100644 --- a/include/linux/tifm.h +++ b/include/linux/tifm.h @@ -17,7 +17,7 @@ #include #include #include -#include +#include /* Host registers (relative to pci base address): */ enum { @@ -110,13 +110,11 @@ struct tifm_adapter { spinlock_t lock; unsigned int irq_status; unsigned int socket_change_set; + wait_queue_head_t change_set_notify; unsigned int id; unsigned int num_sockets; struct tifm_dev **sockets; - char wq_name[KOBJ_NAME_LEN]; - unsigned int inhibit_new_cards; - struct workqueue_struct *wq; - struct work_struct media_switcher; + struct task_struct *media_switcher; struct class_device cdev; struct device *dev; @@ -126,7 +124,7 @@ struct tifm_adapter { struct tifm_adapter *tifm_alloc_adapter(void); void tifm_free_device(struct device *dev); void tifm_free_adapter(struct tifm_adapter *fm); -int tifm_add_adapter(struct tifm_adapter *fm); +int tifm_add_adapter(struct tifm_adapter *fm, int (*mediathreadfn)(void *data)); void tifm_remove_adapter(struct tifm_adapter *fm); struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm); int tifm_register_driver(struct tifm_driver *drv); -- cgit v1.2.3 From b5ad6761533c3f7e97c93b2333a0f88490d44f36 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Mon, 11 Dec 2006 01:55:35 +1100 Subject: tifm_7xx1: recognize device 0xac8f as supported This patch also adds symbolic defines for supported pci ids. Signed-off-by: Alex Dubov Signed-off-by: Pierre Ossman --- include/linux/pci_ids.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d37f46aaaea..ccd706f876e 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -735,9 +735,11 @@ #define PCI_DEVICE_ID_TI_TVP4020 0x3d07 #define PCI_DEVICE_ID_TI_4450 0x8011 #define PCI_DEVICE_ID_TI_XX21_XX11 0x8031 +#define PCI_DEVICE_ID_TI_XX21_XX11_FM 0x8033 #define PCI_DEVICE_ID_TI_XX21_XX11_SD 0x8034 #define PCI_DEVICE_ID_TI_X515 0x8036 #define PCI_DEVICE_ID_TI_XX12 0x8039 +#define PCI_DEVICE_ID_TI_XX12_FM 0x803b #define PCI_DEVICE_ID_TI_1130 0xac12 #define PCI_DEVICE_ID_TI_1031 0xac13 #define PCI_DEVICE_ID_TI_1131 0xac15 @@ -765,6 +767,7 @@ #define PCI_DEVICE_ID_TI_1510 0xac56 #define PCI_DEVICE_ID_TI_X620 0xac8d #define PCI_DEVICE_ID_TI_X420 0xac8e +#define PCI_DEVICE_ID_TI_XX20_FM 0xac8f #define PCI_VENDOR_ID_SONY 0x104d -- cgit v1.2.3 From 41d78f7405659b55e082c5f0b3d1b625e75e1294 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Mon, 11 Dec 2006 01:55:37 +1100 Subject: tifm_core: add suspend/resume infrastructure for tifm devices Signed-off-by: Alex Dubov Signed-off-by: Pierre Ossman --- include/linux/tifm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/tifm.h b/include/linux/tifm.h index e5a8295f9fb..3deb0a6c137 100644 --- a/include/linux/tifm.h +++ b/include/linux/tifm.h @@ -101,6 +101,9 @@ struct tifm_driver { tifm_media_id *id_table; int (*probe)(struct tifm_dev *dev); void (*remove)(struct tifm_dev *dev); + int (*suspend)(struct tifm_dev *dev, + pm_message_t state); + int (*resume)(struct tifm_dev *dev); struct device_driver driver; }; -- cgit v1.2.3 From fe4a3c7a20f14d86022a8132adbf6ddb98e7197c Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 21 Nov 2006 17:54:23 +0100 Subject: mmc: Allow host drivers to specify a max block size Most controllers have an upper limit on the block size. Allow the host drivers to specify this and make sure we avoid hitting this limit. Signed-off-by: Pierre Ossman --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ae98d6766bd..2da0c918a8c 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -94,6 +94,7 @@ struct mmc_host { unsigned short max_phys_segs; /* see blk_queue_max_phys_segments */ unsigned short max_sectors; /* see blk_queue_max_sectors */ unsigned short unused; + unsigned int max_blk_size; /* maximum size of one mmc block */ /* private data */ struct mmc_ios ios; /* current io bus settings */ -- cgit v1.2.3 From 55db890a838c7b37256241b1fc53d6344aa79cc0 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 21 Nov 2006 17:55:45 +0100 Subject: mmc: Allow host drivers to specify max block count Many controllers have an upper limit on the number of blocks that can be transferred in one request. Allow the host drivers to specify this and make sure we avoid hitting this limit. Also change the max_sectors field to avoid confusion. This makes it map less directly to the block layer limits, but as they didn't apply directly on MMC cards anyway, this isn't a great loss. Signed-off-by: Pierre Ossman --- include/linux/mmc/host.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 2da0c918a8c..913e5752569 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -92,9 +92,10 @@ struct mmc_host { unsigned int max_seg_size; /* see blk_queue_max_segment_size */ unsigned short max_hw_segs; /* see blk_queue_max_hw_segments */ unsigned short max_phys_segs; /* see blk_queue_max_phys_segments */ - unsigned short max_sectors; /* see blk_queue_max_sectors */ unsigned short unused; + unsigned int max_req_size; /* maximum number of bytes in one req */ unsigned int max_blk_size; /* maximum size of one mmc block */ + unsigned int max_blk_count; /* maximum number of blocks in one req */ /* private data */ struct mmc_ios ios; /* current io bus settings */ -- cgit v1.2.3 From 459d6e2a541a5226825db998e627e0aa046aa257 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 4 Feb 2007 14:11:55 -0800 Subject: IB: Include explicitly in uses struct kref, so it should include explicitly to avoid hidden include dependencies. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- include/rdma/ib_verbs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 0bfa3328d68..73aafd7bb50 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -45,6 +45,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 062dbb69f32b9ccea701b30f8cc0049482e6211f Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 31 Dec 2006 21:09:42 +0200 Subject: IB: Return qp pointer as part of ib_wc struct ib_wc currently only includes the local QP number: this matches the IB spec, but seems mostly useless. The following patch replaces this with the pointer to qp itself, and updates all low level drivers and all users. This has the following advantages: - Ability to get a per-qp context through wc->qp->qp_context - Existing drivers already have the qp pointer ready in poll cq, so this change actually saves a tiny bit (extra memory read) on data path (for ehca it would actually be expensive to find the QP pointer when polling a CQ, but ehca does not support SRQ so we can leave wc->qp as NULL for ehca) - Users that need the QP number can still get it through wc->qp->qp_num Use case: In IPoIB connected mode code, I have a common CQ shared by multiple QPs. To track connection usage, I need a way to get at some per-QP context upon the completion, and I would like to avoid allocating context object per work request just to stick a QP pointer into it. With this code, I can just use wc->qp->qp_context. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- include/rdma/ib_verbs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 73aafd7bb50..765589f4d16 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -420,8 +420,8 @@ struct ib_wc { enum ib_wc_opcode opcode; u32 vendor_err; u32 byte_len; + struct ib_qp *qp; __be32 imm_data; - u32 qp_num; u32 src_qp; int wc_flags; u16 pkey_index; -- cgit v1.2.3 From fa7252ed4d92397baf30e4a144af95a33eaa925b Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Fri, 19 Jan 2007 11:58:49 -0700 Subject: IB: Make sure struct ib_user_mad.data is aligned Make the untyped data region in ib_user_mad have type u64 so that it gets aligned properly. This avoids alignment faults in ib_umad when casting the data field to an rmpp_mad and accessing the 64-bit tid field on architectures like ia64. Signed-off-by: Jason Gunthorpe Signed-off-by: Roland Dreier --- include/rdma/ib_user_mad.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/rdma/ib_user_mad.h b/include/rdma/ib_user_mad.h index 44537aa32e6..d66b15ea82c 100644 --- a/include/rdma/ib_user_mad.h +++ b/include/rdma/ib_user_mad.h @@ -98,7 +98,7 @@ struct ib_user_mad_hdr { */ struct ib_user_mad { struct ib_user_mad_hdr hdr; - __u8 data[0]; + __u64 data[0]; }; /** -- cgit v1.2.3 From 5556feae1c4e1cf2021b5fb2ef99973125de2250 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Thu, 11 Jan 2007 16:51:17 +0200 Subject: hid: quirk for multi-input devices with unneeded output reports Add new quirk HID_QUIRK_SKIP_OUTPUT_REPORTS to skip output reports when enumerating reports on a hid-input device. Add this quirk and HID_QUIRK_MULTI_INPUT to 0810:0001. PantherLord Twin USB Joystick, 0810:0001 has separate input reports for 2 distinct game controllers in the same interface, so it needs HID_QUIRK_MULTI_INPUT. However, the device also contains one output report per controller which is used to control the force feedback function, and we do not want those to appear as separate input devices as well. The simplest approach seems to be to add a quirk to skip output reports on 0810:0001, and allow the force feedback driver to handle those. Signed-off-by: Anssi Hannula Signed-off-by: Jiri Kosina --- include/linux/hid.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 342b4e639ac..523b8341e79 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -264,6 +264,7 @@ struct hid_item { #define HID_QUIRK_INVERT_HWHEEL 0x00004000 #define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000 #define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000 +#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00020000 /* * This is the global environment of the parser. This information is -- cgit v1.2.3 From 20eb12790670985c8e30821218993bd260387b89 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Thu, 11 Jan 2007 16:51:18 +0200 Subject: hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter Add a force feedback driver for PantherLord USB/PS2 2in1 Adapter, 0810:0001. The device identifies itself as "Twin USB Joystick". Signed-off-by: Anssi Hannula Signed-off-by: Jiri Kosina --- include/linux/hid.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 523b8341e79..18d0f2ce817 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -504,6 +504,7 @@ struct hid_device *hid_parse_report(__u8 *start, unsigned size); int hid_ff_init(struct hid_device *hid); int hid_lgff_init(struct hid_device *hid); +int hid_plff_init(struct hid_device *hid); int hid_tmff_init(struct hid_device *hid); int hid_zpff_init(struct hid_device *hid); #ifdef CONFIG_HID_PID -- cgit v1.2.3 From c080d89ad91e98fec0e8fc5f448a1ad899bd85c7 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 25 Jan 2007 11:43:31 +0100 Subject: HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina --- include/linux/hid-debug.h | 749 ++-------------------------------------------- include/linux/hid.h | 10 - 2 files changed, 18 insertions(+), 741 deletions(-) (limited to 'include') diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h index 8e4dbb51fc7..50d568ec178 100644 --- a/include/linux/hid-debug.h +++ b/include/linux/hid-debug.h @@ -1,10 +1,8 @@ +#ifndef __HID_DEBUG_H +#define __HID_DEBUG_H + /* - * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $ - * - * (c) 1999 Andreas Gal - * (c) 2000-2001 Vojtech Pavlik - * - * Some debug stuff for the HID parser. + * Copyright (c) 2007 Jiri Kosina */ /* @@ -22,737 +20,26 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to , or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ -#include - -struct hid_usage_entry { - unsigned page; - unsigned usage; - char *description; -}; - -static const struct hid_usage_entry hid_usage_table[] = { - { 0, 0, "Undefined" }, - { 1, 0, "GenericDesktop" }, - {0, 0x01, "Pointer"}, - {0, 0x02, "Mouse"}, - {0, 0x04, "Joystick"}, - {0, 0x05, "GamePad"}, - {0, 0x06, "Keyboard"}, - {0, 0x07, "Keypad"}, - {0, 0x08, "MultiAxis"}, - {0, 0x30, "X"}, - {0, 0x31, "Y"}, - {0, 0x32, "Z"}, - {0, 0x33, "Rx"}, - {0, 0x34, "Ry"}, - {0, 0x35, "Rz"}, - {0, 0x36, "Slider"}, - {0, 0x37, "Dial"}, - {0, 0x38, "Wheel"}, - {0, 0x39, "HatSwitch"}, - {0, 0x3a, "CountedBuffer"}, - {0, 0x3b, "ByteCount"}, - {0, 0x3c, "MotionWakeup"}, - {0, 0x3d, "Start"}, - {0, 0x3e, "Select"}, - {0, 0x40, "Vx"}, - {0, 0x41, "Vy"}, - {0, 0x42, "Vz"}, - {0, 0x43, "Vbrx"}, - {0, 0x44, "Vbry"}, - {0, 0x45, "Vbrz"}, - {0, 0x46, "Vno"}, - {0, 0x80, "SystemControl"}, - {0, 0x81, "SystemPowerDown"}, - {0, 0x82, "SystemSleep"}, - {0, 0x83, "SystemWakeUp"}, - {0, 0x84, "SystemContextMenu"}, - {0, 0x85, "SystemMainMenu"}, - {0, 0x86, "SystemAppMenu"}, - {0, 0x87, "SystemMenuHelp"}, - {0, 0x88, "SystemMenuExit"}, - {0, 0x89, "SystemMenuSelect"}, - {0, 0x8a, "SystemMenuRight"}, - {0, 0x8b, "SystemMenuLeft"}, - {0, 0x8c, "SystemMenuUp"}, - {0, 0x8d, "SystemMenuDown"}, - {0, 0x90, "D-PadUp"}, - {0, 0x91, "D-PadDown"}, - {0, 0x92, "D-PadRight"}, - {0, 0x93, "D-PadLeft"}, - { 2, 0, "Simulation" }, - {0, 0xb0, "Aileron"}, - {0, 0xb1, "AileronTrim"}, - {0, 0xb2, "Anti-Torque"}, - {0, 0xb3, "Autopilot"}, - {0, 0xb4, "Chaff"}, - {0, 0xb5, "Collective"}, - {0, 0xb6, "DiveBrake"}, - {0, 0xb7, "ElectronicCountermeasures"}, - {0, 0xb8, "Elevator"}, - {0, 0xb9, "ElevatorTrim"}, - {0, 0xba, "Rudder"}, - {0, 0xbb, "Throttle"}, - {0, 0xbc, "FlightCommunications"}, - {0, 0xbd, "FlareRelease"}, - {0, 0xbe, "LandingGear"}, - {0, 0xbf, "ToeBrake"}, - { 7, 0, "Keyboard" }, - { 8, 0, "LED" }, - {0, 0x01, "NumLock"}, - {0, 0x02, "CapsLock"}, - {0, 0x03, "ScrollLock"}, - {0, 0x04, "Compose"}, - {0, 0x05, "Kana"}, - {0, 0x4b, "GenericIndicator"}, - { 9, 0, "Button" }, - { 10, 0, "Ordinal" }, - { 12, 0, "Consumer" }, - {0, 0x238, "HorizontalWheel"}, - { 13, 0, "Digitizers" }, - {0, 0x01, "Digitizer"}, - {0, 0x02, "Pen"}, - {0, 0x03, "LightPen"}, - {0, 0x04, "TouchScreen"}, - {0, 0x05, "TouchPad"}, - {0, 0x20, "Stylus"}, - {0, 0x21, "Puck"}, - {0, 0x22, "Finger"}, - {0, 0x30, "TipPressure"}, - {0, 0x31, "BarrelPressure"}, - {0, 0x32, "InRange"}, - {0, 0x33, "Touch"}, - {0, 0x34, "UnTouch"}, - {0, 0x35, "Tap"}, - {0, 0x39, "TabletFunctionKey"}, - {0, 0x3a, "ProgramChangeKey"}, - {0, 0x3c, "Invert"}, - {0, 0x42, "TipSwitch"}, - {0, 0x43, "SecondaryTipSwitch"}, - {0, 0x44, "BarrelSwitch"}, - {0, 0x45, "Eraser"}, - {0, 0x46, "TabletPick"}, - { 15, 0, "PhysicalInterfaceDevice" }, - {0, 0x00, "Undefined"}, - {0, 0x01, "Physical_Interface_Device"}, - {0, 0x20, "Normal"}, - {0, 0x21, "Set_Effect_Report"}, - {0, 0x22, "Effect_Block_Index"}, - {0, 0x23, "Parameter_Block_Offset"}, - {0, 0x24, "ROM_Flag"}, - {0, 0x25, "Effect_Type"}, - {0, 0x26, "ET_Constant_Force"}, - {0, 0x27, "ET_Ramp"}, - {0, 0x28, "ET_Custom_Force_Data"}, - {0, 0x30, "ET_Square"}, - {0, 0x31, "ET_Sine"}, - {0, 0x32, "ET_Triangle"}, - {0, 0x33, "ET_Sawtooth_Up"}, - {0, 0x34, "ET_Sawtooth_Down"}, - {0, 0x40, "ET_Spring"}, - {0, 0x41, "ET_Damper"}, - {0, 0x42, "ET_Inertia"}, - {0, 0x43, "ET_Friction"}, - {0, 0x50, "Duration"}, - {0, 0x51, "Sample_Period"}, - {0, 0x52, "Gain"}, - {0, 0x53, "Trigger_Button"}, - {0, 0x54, "Trigger_Repeat_Interval"}, - {0, 0x55, "Axes_Enable"}, - {0, 0x56, "Direction_Enable"}, - {0, 0x57, "Direction"}, - {0, 0x58, "Type_Specific_Block_Offset"}, - {0, 0x59, "Block_Type"}, - {0, 0x5A, "Set_Envelope_Report"}, - {0, 0x5B, "Attack_Level"}, - {0, 0x5C, "Attack_Time"}, - {0, 0x5D, "Fade_Level"}, - {0, 0x5E, "Fade_Time"}, - {0, 0x5F, "Set_Condition_Report"}, - {0, 0x60, "CP_Offset"}, - {0, 0x61, "Positive_Coefficient"}, - {0, 0x62, "Negative_Coefficient"}, - {0, 0x63, "Positive_Saturation"}, - {0, 0x64, "Negative_Saturation"}, - {0, 0x65, "Dead_Band"}, - {0, 0x66, "Download_Force_Sample"}, - {0, 0x67, "Isoch_Custom_Force_Enable"}, - {0, 0x68, "Custom_Force_Data_Report"}, - {0, 0x69, "Custom_Force_Data"}, - {0, 0x6A, "Custom_Force_Vendor_Defined_Data"}, - {0, 0x6B, "Set_Custom_Force_Report"}, - {0, 0x6C, "Custom_Force_Data_Offset"}, - {0, 0x6D, "Sample_Count"}, - {0, 0x6E, "Set_Periodic_Report"}, - {0, 0x6F, "Offset"}, - {0, 0x70, "Magnitude"}, - {0, 0x71, "Phase"}, - {0, 0x72, "Period"}, - {0, 0x73, "Set_Constant_Force_Report"}, - {0, 0x74, "Set_Ramp_Force_Report"}, - {0, 0x75, "Ramp_Start"}, - {0, 0x76, "Ramp_End"}, - {0, 0x77, "Effect_Operation_Report"}, - {0, 0x78, "Effect_Operation"}, - {0, 0x79, "Op_Effect_Start"}, - {0, 0x7A, "Op_Effect_Start_Solo"}, - {0, 0x7B, "Op_Effect_Stop"}, - {0, 0x7C, "Loop_Count"}, - {0, 0x7D, "Device_Gain_Report"}, - {0, 0x7E, "Device_Gain"}, - {0, 0x7F, "PID_Pool_Report"}, - {0, 0x80, "RAM_Pool_Size"}, - {0, 0x81, "ROM_Pool_Size"}, - {0, 0x82, "ROM_Effect_Block_Count"}, - {0, 0x83, "Simultaneous_Effects_Max"}, - {0, 0x84, "Pool_Alignment"}, - {0, 0x85, "PID_Pool_Move_Report"}, - {0, 0x86, "Move_Source"}, - {0, 0x87, "Move_Destination"}, - {0, 0x88, "Move_Length"}, - {0, 0x89, "PID_Block_Load_Report"}, - {0, 0x8B, "Block_Load_Status"}, - {0, 0x8C, "Block_Load_Success"}, - {0, 0x8D, "Block_Load_Full"}, - {0, 0x8E, "Block_Load_Error"}, - {0, 0x8F, "Block_Handle"}, - {0, 0x90, "PID_Block_Free_Report"}, - {0, 0x91, "Type_Specific_Block_Handle"}, - {0, 0x92, "PID_State_Report"}, - {0, 0x94, "Effect_Playing"}, - {0, 0x95, "PID_Device_Control_Report"}, - {0, 0x96, "PID_Device_Control"}, - {0, 0x97, "DC_Enable_Actuators"}, - {0, 0x98, "DC_Disable_Actuators"}, - {0, 0x99, "DC_Stop_All_Effects"}, - {0, 0x9A, "DC_Device_Reset"}, - {0, 0x9B, "DC_Device_Pause"}, - {0, 0x9C, "DC_Device_Continue"}, - {0, 0x9F, "Device_Paused"}, - {0, 0xA0, "Actuators_Enabled"}, - {0, 0xA4, "Safety_Switch"}, - {0, 0xA5, "Actuator_Override_Switch"}, - {0, 0xA6, "Actuator_Power"}, - {0, 0xA7, "Start_Delay"}, - {0, 0xA8, "Parameter_Block_Size"}, - {0, 0xA9, "Device_Managed_Pool"}, - {0, 0xAA, "Shared_Parameter_Blocks"}, - {0, 0xAB, "Create_New_Effect_Report"}, - {0, 0xAC, "RAM_Pool_Available"}, - { 0x84, 0, "Power Device" }, - { 0x84, 0x02, "PresentStatus" }, - { 0x84, 0x03, "ChangeStatus" }, - { 0x84, 0x04, "UPS" }, - { 0x84, 0x05, "PowerSupply" }, - { 0x84, 0x10, "BatterySystem" }, - { 0x84, 0x11, "BatterySystemID" }, - { 0x84, 0x12, "Battery" }, - { 0x84, 0x13, "BatteryID" }, - { 0x84, 0x14, "Charger" }, - { 0x84, 0x15, "ChargerID" }, - { 0x84, 0x16, "PowerConverter" }, - { 0x84, 0x17, "PowerConverterID" }, - { 0x84, 0x18, "OutletSystem" }, - { 0x84, 0x19, "OutletSystemID" }, - { 0x84, 0x1a, "Input" }, - { 0x84, 0x1b, "InputID" }, - { 0x84, 0x1c, "Output" }, - { 0x84, 0x1d, "OutputID" }, - { 0x84, 0x1e, "Flow" }, - { 0x84, 0x1f, "FlowID" }, - { 0x84, 0x20, "Outlet" }, - { 0x84, 0x21, "OutletID" }, - { 0x84, 0x22, "Gang" }, - { 0x84, 0x24, "PowerSummary" }, - { 0x84, 0x25, "PowerSummaryID" }, - { 0x84, 0x30, "Voltage" }, - { 0x84, 0x31, "Current" }, - { 0x84, 0x32, "Frequency" }, - { 0x84, 0x33, "ApparentPower" }, - { 0x84, 0x35, "PercentLoad" }, - { 0x84, 0x40, "ConfigVoltage" }, - { 0x84, 0x41, "ConfigCurrent" }, - { 0x84, 0x43, "ConfigApparentPower" }, - { 0x84, 0x53, "LowVoltageTransfer" }, - { 0x84, 0x54, "HighVoltageTransfer" }, - { 0x84, 0x56, "DelayBeforeStartup" }, - { 0x84, 0x57, "DelayBeforeShutdown" }, - { 0x84, 0x58, "Test" }, - { 0x84, 0x5a, "AudibleAlarmControl" }, - { 0x84, 0x60, "Present" }, - { 0x84, 0x61, "Good" }, - { 0x84, 0x62, "InternalFailure" }, - { 0x84, 0x65, "Overload" }, - { 0x84, 0x66, "OverCharged" }, - { 0x84, 0x67, "OverTemperature" }, - { 0x84, 0x68, "ShutdownRequested" }, - { 0x84, 0x69, "ShutdownImminent" }, - { 0x84, 0x6b, "SwitchOn/Off" }, - { 0x84, 0x6c, "Switchable" }, - { 0x84, 0x6d, "Used" }, - { 0x84, 0x6e, "Boost" }, - { 0x84, 0x73, "CommunicationLost" }, - { 0x84, 0xfd, "iManufacturer" }, - { 0x84, 0xfe, "iProduct" }, - { 0x84, 0xff, "iSerialNumber" }, - { 0x85, 0, "Battery System" }, - { 0x85, 0x01, "SMBBatteryMode" }, - { 0x85, 0x02, "SMBBatteryStatus" }, - { 0x85, 0x03, "SMBAlarmWarning" }, - { 0x85, 0x04, "SMBChargerMode" }, - { 0x85, 0x05, "SMBChargerStatus" }, - { 0x85, 0x06, "SMBChargerSpecInfo" }, - { 0x85, 0x07, "SMBSelectorState" }, - { 0x85, 0x08, "SMBSelectorPresets" }, - { 0x85, 0x09, "SMBSelectorInfo" }, - { 0x85, 0x29, "RemainingCapacityLimit" }, - { 0x85, 0x2c, "CapacityMode" }, - { 0x85, 0x42, "BelowRemainingCapacityLimit" }, - { 0x85, 0x44, "Charging" }, - { 0x85, 0x45, "Discharging" }, - { 0x85, 0x4b, "NeedReplacement" }, - { 0x85, 0x66, "RemainingCapacity" }, - { 0x85, 0x68, "RunTimeToEmpty" }, - { 0x85, 0x6a, "AverageTimeToFull" }, - { 0x85, 0x83, "DesignCapacity" }, - { 0x85, 0x85, "ManufacturerDate" }, - { 0x85, 0x89, "iDeviceChemistry" }, - { 0x85, 0x8b, "Rechargable" }, - { 0x85, 0x8f, "iOEMInformation" }, - { 0x85, 0x8d, "CapacityGranularity1" }, - { 0x85, 0xd0, "ACPresent" }, - /* pages 0xff00 to 0xffff are vendor-specific */ - { 0xffff, 0, "Vendor-specific-FF" }, - { 0, 0, NULL } -}; - -static void resolv_usage_page(unsigned page) { - const struct hid_usage_entry *p; - - for (p = hid_usage_table; p->description; p++) - if (p->page == page) { - printk("%s", p->description); - return; - } - printk("%04x", page); -} - -static void resolv_usage(unsigned usage) { - const struct hid_usage_entry *p; - - resolv_usage_page(usage >> 16); - printk("."); - for (p = hid_usage_table; p->description; p++) - if (p->page == (usage >> 16)) { - for(++p; p->description && p->usage != 0; p++) - if (p->usage == (usage & 0xffff)) { - printk("%s", p->description); - return; - } - break; - } - printk("%04x", usage & 0xffff); -} - -__inline__ static void tab(int n) { - while (n--) printk(" "); -} - -static void hid_dump_field(struct hid_field *field, int n) { - int j; - - if (field->physical) { - tab(n); - printk("Physical("); - resolv_usage(field->physical); printk(")\n"); - } - if (field->logical) { - tab(n); - printk("Logical("); - resolv_usage(field->logical); printk(")\n"); - } - tab(n); printk("Usage(%d)\n", field->maxusage); - for (j = 0; j < field->maxusage; j++) { - tab(n+2);resolv_usage(field->usage[j].hid); printk("\n"); - } - if (field->logical_minimum != field->logical_maximum) { - tab(n); printk("Logical Minimum(%d)\n", field->logical_minimum); - tab(n); printk("Logical Maximum(%d)\n", field->logical_maximum); - } - if (field->physical_minimum != field->physical_maximum) { - tab(n); printk("Physical Minimum(%d)\n", field->physical_minimum); - tab(n); printk("Physical Maximum(%d)\n", field->physical_maximum); - } - if (field->unit_exponent) { - tab(n); printk("Unit Exponent(%d)\n", field->unit_exponent); - } - if (field->unit) { - char *systems[5] = { "None", "SI Linear", "SI Rotation", "English Linear", "English Rotation" }; - char *units[5][8] = { - { "None", "None", "None", "None", "None", "None", "None", "None" }, - { "None", "Centimeter", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" }, - { "None", "Radians", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" }, - { "None", "Inch", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" }, - { "None", "Degrees", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" } - }; - - int i; - int sys; - __u32 data = field->unit; - - /* First nibble tells us which system we're in. */ - sys = data & 0xf; - data >>= 4; - - if(sys > 4) { - tab(n); printk("Unit(Invalid)\n"); - } - else { - int earlier_unit = 0; - - tab(n); printk("Unit(%s : ", systems[sys]); - - for (i=1 ; i>= 4; - if (nibble != 0) { - if(earlier_unit++ > 0) - printk("*"); - printk("%s", units[sys][i]); - if(nibble != 1) { - /* This is a _signed_ nibble(!) */ - - int val = nibble & 0x7; - if(nibble & 0x08) - val = -((0x7 & ~val) +1); - printk("^%d", val); - } - } - } - printk(")\n"); - } - } - tab(n); printk("Report Size(%u)\n", field->report_size); - tab(n); printk("Report Count(%u)\n", field->report_count); - tab(n); printk("Report Offset(%u)\n", field->report_offset); - - tab(n); printk("Flags( "); - j = field->flags; - printk("%s", HID_MAIN_ITEM_CONSTANT & j ? "Constant " : ""); - printk("%s", HID_MAIN_ITEM_VARIABLE & j ? "Variable " : "Array "); - printk("%s", HID_MAIN_ITEM_RELATIVE & j ? "Relative " : "Absolute "); - printk("%s", HID_MAIN_ITEM_WRAP & j ? "Wrap " : ""); - printk("%s", HID_MAIN_ITEM_NONLINEAR & j ? "NonLinear " : ""); - printk("%s", HID_MAIN_ITEM_NO_PREFERRED & j ? "NoPrefferedState " : ""); - printk("%s", HID_MAIN_ITEM_NULL_STATE & j ? "NullState " : ""); - printk("%s", HID_MAIN_ITEM_VOLATILE & j ? "Volatile " : ""); - printk("%s", HID_MAIN_ITEM_BUFFERED_BYTE & j ? "BufferedByte " : ""); - printk(")\n"); -} - -static void __attribute__((unused)) hid_dump_device(struct hid_device *device) { - struct hid_report_enum *report_enum; - struct hid_report *report; - struct list_head *list; - unsigned i,k; - static char *table[] = {"INPUT", "OUTPUT", "FEATURE"}; - - for (i = 0; i < HID_REPORT_TYPES; i++) { - report_enum = device->report_enum + i; - list = report_enum->report_list.next; - while (list != &report_enum->report_list) { - report = (struct hid_report *) list; - tab(2); - printk("%s", table[i]); - if (report->id) - printk("(%d)", report->id); - printk("[%s]", table[report->type]); - printk("\n"); - for (k = 0; k < report->maxfield; k++) { - tab(4); - printk("Field(%d)\n", k); - hid_dump_field(report->field[k], 6); - } - list = list->next; - } - } -} - -static void __attribute__((unused)) hid_dump_input(struct hid_usage *usage, __s32 value) { - printk("hid-debug: input "); - resolv_usage(usage->hid); - printk(" = %d\n", value); -} - - -static char *events[EV_MAX + 1] = { - [EV_SYN] = "Sync", [EV_KEY] = "Key", - [EV_REL] = "Relative", [EV_ABS] = "Absolute", - [EV_MSC] = "Misc", [EV_LED] = "LED", - [EV_SND] = "Sound", [EV_REP] = "Repeat", - [EV_FF] = "ForceFeedback", [EV_PWR] = "Power", - [EV_FF_STATUS] = "ForceFeedbackStatus", -}; - -static char *syncs[2] = { - [SYN_REPORT] = "Report", [SYN_CONFIG] = "Config", -}; -static char *keys[KEY_MAX + 1] = { - [KEY_RESERVED] = "Reserved", [KEY_ESC] = "Esc", - [KEY_1] = "1", [KEY_2] = "2", - [KEY_3] = "3", [KEY_4] = "4", - [KEY_5] = "5", [KEY_6] = "6", - [KEY_7] = "7", [KEY_8] = "8", - [KEY_9] = "9", [KEY_0] = "0", - [KEY_MINUS] = "Minus", [KEY_EQUAL] = "Equal", - [KEY_BACKSPACE] = "Backspace", [KEY_TAB] = "Tab", - [KEY_Q] = "Q", [KEY_W] = "W", - [KEY_E] = "E", [KEY_R] = "R", - [KEY_T] = "T", [KEY_Y] = "Y", - [KEY_U] = "U", [KEY_I] = "I", - [KEY_O] = "O", [KEY_P] = "P", - [KEY_LEFTBRACE] = "LeftBrace", [KEY_RIGHTBRACE] = "RightBrace", - [KEY_ENTER] = "Enter", [KEY_LEFTCTRL] = "LeftControl", - [KEY_A] = "A", [KEY_S] = "S", - [KEY_D] = "D", [KEY_F] = "F", - [KEY_G] = "G", [KEY_H] = "H", - [KEY_J] = "J", [KEY_K] = "K", - [KEY_L] = "L", [KEY_SEMICOLON] = "Semicolon", - [KEY_APOSTROPHE] = "Apostrophe", [KEY_GRAVE] = "Grave", - [KEY_LEFTSHIFT] = "LeftShift", [KEY_BACKSLASH] = "BackSlash", - [KEY_Z] = "Z", [KEY_X] = "X", - [KEY_C] = "C", [KEY_V] = "V", - [KEY_B] = "B", [KEY_N] = "N", - [KEY_M] = "M", [KEY_COMMA] = "Comma", - [KEY_DOT] = "Dot", [KEY_SLASH] = "Slash", - [KEY_RIGHTSHIFT] = "RightShift", [KEY_KPASTERISK] = "KPAsterisk", - [KEY_LEFTALT] = "LeftAlt", [KEY_SPACE] = "Space", - [KEY_CAPSLOCK] = "CapsLock", [KEY_F1] = "F1", - [KEY_F2] = "F2", [KEY_F3] = "F3", - [KEY_F4] = "F4", [KEY_F5] = "F5", - [KEY_F6] = "F6", [KEY_F7] = "F7", - [KEY_F8] = "F8", [KEY_F9] = "F9", - [KEY_F10] = "F10", [KEY_NUMLOCK] = "NumLock", - [KEY_SCROLLLOCK] = "ScrollLock", [KEY_KP7] = "KP7", - [KEY_KP8] = "KP8", [KEY_KP9] = "KP9", - [KEY_KPMINUS] = "KPMinus", [KEY_KP4] = "KP4", - [KEY_KP5] = "KP5", [KEY_KP6] = "KP6", - [KEY_KPPLUS] = "KPPlus", [KEY_KP1] = "KP1", - [KEY_KP2] = "KP2", [KEY_KP3] = "KP3", - [KEY_KP0] = "KP0", [KEY_KPDOT] = "KPDot", - [KEY_ZENKAKUHANKAKU] = "Zenkaku/Hankaku", [KEY_102ND] = "102nd", - [KEY_F11] = "F11", [KEY_F12] = "F12", - [KEY_RO] = "RO", [KEY_KATAKANA] = "Katakana", - [KEY_HIRAGANA] = "HIRAGANA", [KEY_HENKAN] = "Henkan", - [KEY_KATAKANAHIRAGANA] = "Katakana/Hiragana", [KEY_MUHENKAN] = "Muhenkan", - [KEY_KPJPCOMMA] = "KPJpComma", [KEY_KPENTER] = "KPEnter", - [KEY_RIGHTCTRL] = "RightCtrl", [KEY_KPSLASH] = "KPSlash", - [KEY_SYSRQ] = "SysRq", [KEY_RIGHTALT] = "RightAlt", - [KEY_LINEFEED] = "LineFeed", [KEY_HOME] = "Home", - [KEY_UP] = "Up", [KEY_PAGEUP] = "PageUp", - [KEY_LEFT] = "Left", [KEY_RIGHT] = "Right", - [KEY_END] = "End", [KEY_DOWN] = "Down", - [KEY_PAGEDOWN] = "PageDown", [KEY_INSERT] = "Insert", - [KEY_DELETE] = "Delete", [KEY_MACRO] = "Macro", - [KEY_MUTE] = "Mute", [KEY_VOLUMEDOWN] = "VolumeDown", - [KEY_VOLUMEUP] = "VolumeUp", [KEY_POWER] = "Power", - [KEY_KPEQUAL] = "KPEqual", [KEY_KPPLUSMINUS] = "KPPlusMinus", - [KEY_PAUSE] = "Pause", [KEY_KPCOMMA] = "KPComma", - [KEY_HANGUEL] = "Hangeul", [KEY_HANJA] = "Hanja", - [KEY_YEN] = "Yen", [KEY_LEFTMETA] = "LeftMeta", - [KEY_RIGHTMETA] = "RightMeta", [KEY_COMPOSE] = "Compose", - [KEY_STOP] = "Stop", [KEY_AGAIN] = "Again", - [KEY_PROPS] = "Props", [KEY_UNDO] = "Undo", - [KEY_FRONT] = "Front", [KEY_COPY] = "Copy", - [KEY_OPEN] = "Open", [KEY_PASTE] = "Paste", - [KEY_FIND] = "Find", [KEY_CUT] = "Cut", - [KEY_HELP] = "Help", [KEY_MENU] = "Menu", - [KEY_CALC] = "Calc", [KEY_SETUP] = "Setup", - [KEY_SLEEP] = "Sleep", [KEY_WAKEUP] = "WakeUp", - [KEY_FILE] = "File", [KEY_SENDFILE] = "SendFile", - [KEY_DELETEFILE] = "DeleteFile", [KEY_XFER] = "X-fer", - [KEY_PROG1] = "Prog1", [KEY_PROG2] = "Prog2", - [KEY_WWW] = "WWW", [KEY_MSDOS] = "MSDOS", - [KEY_COFFEE] = "Coffee", [KEY_DIRECTION] = "Direction", - [KEY_CYCLEWINDOWS] = "CycleWindows", [KEY_MAIL] = "Mail", - [KEY_BOOKMARKS] = "Bookmarks", [KEY_COMPUTER] = "Computer", - [KEY_BACK] = "Back", [KEY_FORWARD] = "Forward", - [KEY_CLOSECD] = "CloseCD", [KEY_EJECTCD] = "EjectCD", - [KEY_EJECTCLOSECD] = "EjectCloseCD", [KEY_NEXTSONG] = "NextSong", - [KEY_PLAYPAUSE] = "PlayPause", [KEY_PREVIOUSSONG] = "PreviousSong", - [KEY_STOPCD] = "StopCD", [KEY_RECORD] = "Record", - [KEY_REWIND] = "Rewind", [KEY_PHONE] = "Phone", - [KEY_ISO] = "ISOKey", [KEY_CONFIG] = "Config", - [KEY_HOMEPAGE] = "HomePage", [KEY_REFRESH] = "Refresh", - [KEY_EXIT] = "Exit", [KEY_MOVE] = "Move", - [KEY_EDIT] = "Edit", [KEY_SCROLLUP] = "ScrollUp", - [KEY_SCROLLDOWN] = "ScrollDown", [KEY_KPLEFTPAREN] = "KPLeftParenthesis", - [KEY_KPRIGHTPAREN] = "KPRightParenthesis", [KEY_NEW] = "New", - [KEY_REDO] = "Redo", [KEY_F13] = "F13", - [KEY_F14] = "F14", [KEY_F15] = "F15", - [KEY_F16] = "F16", [KEY_F17] = "F17", - [KEY_F18] = "F18", [KEY_F19] = "F19", - [KEY_F20] = "F20", [KEY_F21] = "F21", - [KEY_F22] = "F22", [KEY_F23] = "F23", - [KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD", - [KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3", - [KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend", - [KEY_CLOSE] = "Close", [KEY_PLAY] = "Play", - [KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost", - [KEY_PRINT] = "Print", [KEY_HP] = "HP", - [KEY_CAMERA] = "Camera", [KEY_SOUND] = "Sound", - [KEY_QUESTION] = "Question", [KEY_EMAIL] = "Email", - [KEY_CHAT] = "Chat", [KEY_SEARCH] = "Search", - [KEY_CONNECT] = "Connect", [KEY_FINANCE] = "Finance", - [KEY_SPORT] = "Sport", [KEY_SHOP] = "Shop", - [KEY_ALTERASE] = "AlternateErase", [KEY_CANCEL] = "Cancel", - [KEY_BRIGHTNESSDOWN] = "BrightnessDown", [KEY_BRIGHTNESSUP] = "BrightnessUp", - [KEY_MEDIA] = "Media", [KEY_UNKNOWN] = "Unknown", - [BTN_0] = "Btn0", [BTN_1] = "Btn1", - [BTN_2] = "Btn2", [BTN_3] = "Btn3", - [BTN_4] = "Btn4", [BTN_5] = "Btn5", - [BTN_6] = "Btn6", [BTN_7] = "Btn7", - [BTN_8] = "Btn8", [BTN_9] = "Btn9", - [BTN_LEFT] = "LeftBtn", [BTN_RIGHT] = "RightBtn", - [BTN_MIDDLE] = "MiddleBtn", [BTN_SIDE] = "SideBtn", - [BTN_EXTRA] = "ExtraBtn", [BTN_FORWARD] = "ForwardBtn", - [BTN_BACK] = "BackBtn", [BTN_TASK] = "TaskBtn", - [BTN_TRIGGER] = "Trigger", [BTN_THUMB] = "ThumbBtn", - [BTN_THUMB2] = "ThumbBtn2", [BTN_TOP] = "TopBtn", - [BTN_TOP2] = "TopBtn2", [BTN_PINKIE] = "PinkieBtn", - [BTN_BASE] = "BaseBtn", [BTN_BASE2] = "BaseBtn2", - [BTN_BASE3] = "BaseBtn3", [BTN_BASE4] = "BaseBtn4", - [BTN_BASE5] = "BaseBtn5", [BTN_BASE6] = "BaseBtn6", - [BTN_DEAD] = "BtnDead", [BTN_A] = "BtnA", - [BTN_B] = "BtnB", [BTN_C] = "BtnC", - [BTN_X] = "BtnX", [BTN_Y] = "BtnY", - [BTN_Z] = "BtnZ", [BTN_TL] = "BtnTL", - [BTN_TR] = "BtnTR", [BTN_TL2] = "BtnTL2", - [BTN_TR2] = "BtnTR2", [BTN_SELECT] = "BtnSelect", - [BTN_START] = "BtnStart", [BTN_MODE] = "BtnMode", - [BTN_THUMBL] = "BtnThumbL", [BTN_THUMBR] = "BtnThumbR", - [BTN_TOOL_PEN] = "ToolPen", [BTN_TOOL_RUBBER] = "ToolRubber", - [BTN_TOOL_BRUSH] = "ToolBrush", [BTN_TOOL_PENCIL] = "ToolPencil", - [BTN_TOOL_AIRBRUSH] = "ToolAirbrush", [BTN_TOOL_FINGER] = "ToolFinger", - [BTN_TOOL_MOUSE] = "ToolMouse", [BTN_TOOL_LENS] = "ToolLens", - [BTN_TOUCH] = "Touch", [BTN_STYLUS] = "Stylus", - [BTN_STYLUS2] = "Stylus2", [BTN_TOOL_DOUBLETAP] = "ToolDoubleTap", - [BTN_TOOL_TRIPLETAP] = "ToolTripleTap", [BTN_GEAR_DOWN] = "WheelBtn", - [BTN_GEAR_UP] = "Gear up", [KEY_OK] = "Ok", - [KEY_SELECT] = "Select", [KEY_GOTO] = "Goto", - [KEY_CLEAR] = "Clear", [KEY_POWER2] = "Power2", - [KEY_OPTION] = "Option", [KEY_INFO] = "Info", - [KEY_TIME] = "Time", [KEY_VENDOR] = "Vendor", - [KEY_ARCHIVE] = "Archive", [KEY_PROGRAM] = "Program", - [KEY_CHANNEL] = "Channel", [KEY_FAVORITES] = "Favorites", - [KEY_EPG] = "EPG", [KEY_PVR] = "PVR", - [KEY_MHP] = "MHP", [KEY_LANGUAGE] = "Language", - [KEY_TITLE] = "Title", [KEY_SUBTITLE] = "Subtitle", - [KEY_ANGLE] = "Angle", [KEY_ZOOM] = "Zoom", - [KEY_MODE] = "Mode", [KEY_KEYBOARD] = "Keyboard", - [KEY_SCREEN] = "Screen", [KEY_PC] = "PC", - [KEY_TV] = "TV", [KEY_TV2] = "TV2", - [KEY_VCR] = "VCR", [KEY_VCR2] = "VCR2", - [KEY_SAT] = "Sat", [KEY_SAT2] = "Sat2", - [KEY_CD] = "CD", [KEY_TAPE] = "Tape", - [KEY_RADIO] = "Radio", [KEY_TUNER] = "Tuner", - [KEY_PLAYER] = "Player", [KEY_TEXT] = "Text", - [KEY_DVD] = "DVD", [KEY_AUX] = "Aux", - [KEY_MP3] = "MP3", [KEY_AUDIO] = "Audio", - [KEY_VIDEO] = "Video", [KEY_DIRECTORY] = "Directory", - [KEY_LIST] = "List", [KEY_MEMO] = "Memo", - [KEY_CALENDAR] = "Calendar", [KEY_RED] = "Red", - [KEY_GREEN] = "Green", [KEY_YELLOW] = "Yellow", - [KEY_BLUE] = "Blue", [KEY_CHANNELUP] = "ChannelUp", - [KEY_CHANNELDOWN] = "ChannelDown", [KEY_FIRST] = "First", - [KEY_LAST] = "Last", [KEY_AB] = "AB", - [KEY_NEXT] = "Next", [KEY_RESTART] = "Restart", - [KEY_SLOW] = "Slow", [KEY_SHUFFLE] = "Shuffle", - [KEY_BREAK] = "Break", [KEY_PREVIOUS] = "Previous", - [KEY_DIGITS] = "Digits", [KEY_TEEN] = "TEEN", - [KEY_TWEN] = "TWEN", [KEY_DEL_EOL] = "DeleteEOL", - [KEY_DEL_EOS] = "DeleteEOS", [KEY_INS_LINE] = "InsertLine", - [KEY_DEL_LINE] = "DeleteLine", - [KEY_SEND] = "Send", [KEY_REPLY] = "Reply", - [KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save", - [KEY_DOCUMENTS] = "Documents", - [KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC", - [KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2", - [KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D", - [KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F", - [KEY_FN_S] = "Fn+S", - [KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2", - [KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4", - [KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6", - [KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8", - [KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10", - [KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12", - [KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle", - [KEY_KBDILLUMDOWN] = "KbdIlluminationDown", - [KEY_KBDILLUMUP] = "KbdIlluminationUp", - [KEY_SWITCHVIDEOMODE] = "SwitchVideoMode", -}; - -static char *relatives[REL_MAX + 1] = { - [REL_X] = "X", [REL_Y] = "Y", - [REL_Z] = "Z", [REL_RX] = "Rx", - [REL_RY] = "Ry", [REL_RZ] = "Rz", - [REL_HWHEEL] = "HWheel", [REL_DIAL] = "Dial", - [REL_WHEEL] = "Wheel", [REL_MISC] = "Misc", -}; - -static char *absolutes[ABS_MAX + 1] = { - [ABS_X] = "X", [ABS_Y] = "Y", - [ABS_Z] = "Z", [ABS_RX] = "Rx", - [ABS_RY] = "Ry", [ABS_RZ] = "Rz", - [ABS_THROTTLE] = "Throttle", [ABS_RUDDER] = "Rudder", - [ABS_WHEEL] = "Wheel", [ABS_GAS] = "Gas", - [ABS_BRAKE] = "Brake", [ABS_HAT0X] = "Hat0X", - [ABS_HAT0Y] = "Hat0Y", [ABS_HAT1X] = "Hat1X", - [ABS_HAT1Y] = "Hat1Y", [ABS_HAT2X] = "Hat2X", - [ABS_HAT2Y] = "Hat2Y", [ABS_HAT3X] = "Hat3X", - [ABS_HAT3Y] = "Hat 3Y", [ABS_PRESSURE] = "Pressure", - [ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt", - [ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "Tool Width", - [ABS_VOLUME] = "Volume", [ABS_MISC] = "Misc", -}; +#ifdef CONFIG_HID_DEBUG -static char *misc[MSC_MAX + 1] = { - [MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled", - [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData" -}; +void hid_dump_input(struct hid_usage *, __s32); +void hid_dump_device(struct hid_device *); +void hid_dump_field(struct hid_field *, int); +void hid_resolv_usage(unsigned); +void hid_resolv_event(__u8, __u16); -static char *leds[LED_MAX + 1] = { - [LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock", - [LED_SCROLLL] = "ScrollLock", [LED_COMPOSE] = "Compose", - [LED_KANA] = "Kana", [LED_SLEEP] = "Sleep", - [LED_SUSPEND] = "Suspend", [LED_MUTE] = "Mute", - [LED_MISC] = "Misc", -}; +#else -static char *repeats[REP_MAX + 1] = { - [REP_DELAY] = "Delay", [REP_PERIOD] = "Period" -}; +#define hid_dump_input(a,b) do { } while (0) +#define hid_dump_device(c) do { } while (0) +#define hid_dump_field(a,b) do { } while (0) +#define hid_resolv_usage(a) do { } while (0) +#define hid_resolv_event(a,b) do { } while (0) -static char *sounds[SND_MAX + 1] = { - [SND_CLICK] = "Click", [SND_BELL] = "Bell", - [SND_TONE] = "Tone" -}; +#endif /* CONFIG_HID_DEBUG */ -static char **names[EV_MAX + 1] = { - [EV_SYN] = syncs, [EV_KEY] = keys, - [EV_REL] = relatives, [EV_ABS] = absolutes, - [EV_MSC] = misc, [EV_LED] = leds, - [EV_SND] = sounds, [EV_REP] = repeats, -}; -static void __attribute__((unused)) resolv_event(__u8 type, __u16 code) { +#endif - printk("%s.%s", events[type] ? events[type] : "?", - names[type] ? (names[type][code] ? names[type][code] : "?") : "?"); -} diff --git a/include/linux/hid.h b/include/linux/hid.h index 18d0f2ce817..189460e7b03 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -472,16 +472,6 @@ struct hid_descriptor { struct hid_class_descriptor desc[1]; } __attribute__ ((packed)); -#ifdef DEBUG -#include "hid-debug.h" -#else -#define hid_dump_input(a,b) do { } while (0) -#define hid_dump_device(c) do { } while (0) -#define hid_dump_field(a,b) do { } while (0) -#define resolv_usage(a) do { } while (0) -#define resolv_event(a,b) do { } while (0) -#endif - /* Applications from HID Usage Tables 4/8/99 Version 1.1 */ /* We ignore a few input applications that are not widely used */ #define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001)) -- cgit v1.2.3 From 7c379146005d277982acde02da44c773de5e7e5a Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 24 Jan 2007 11:54:19 +0100 Subject: HID: API - fix leftovers of hidinput API in USB HID hidinput_{open,close}() functions do not belong to usbhid, but to the generic HID layer. Move them, and fix hooks in struct hid_device, so that now the callbacks are done to transport-specific _open() functions, but not input_open() functions. Signed-off-by: Jiri Kosina --- include/linux/hid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 189460e7b03..829690d8071 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -431,8 +431,8 @@ struct hid_device { /* device report descriptor */ /* device-specific function pointers */ int (*hidinput_input_event) (struct input_dev *, unsigned int, unsigned int, int); - int (*hidinput_open) (struct input_dev *); - void (*hidinput_close) (struct input_dev *); + int (*hid_open) (struct hid_device *); + void (*hid_close) (struct hid_device *); /* hiddev event handler */ void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field, -- cgit v1.2.3 From a417a21e10831bca695b4ba9c74f4ddf5a95ac06 Mon Sep 17 00:00:00 2001 From: Soeren Sonnenburg Date: Mon, 5 Feb 2007 10:06:01 +0100 Subject: USB HID: handle multi-interface devices for Apple macbook pro properly Some HID devices by Apple have both keyboard and mouse interfaces; the keyboard interface is handled by usbhid, but the mouse (really touchpad) interface must be handled by the separate 'appletouch' driver. Using HID_QUIRK_IGNORE will make hiddev ignore both interfaces, therefore a new quirk flag to ignore only the mouse interface is required. Signed-off-by: Soeren Sonnenburg Signed-off-by: Sergey Vlasov Signed-off-by: Jiri Kosina --- include/linux/hid.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 829690d8071..93173fe4563 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -265,6 +265,7 @@ struct hid_item { #define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000 #define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000 #define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00020000 +#define HID_QUIRK_IGNORE_MOUSE 0x00040000 /* * This is the global environment of the parser. This information is -- cgit v1.2.3 From 2b67fc46061b2171fb8fbb55d1ac717abd533569 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:16:47 +0100 Subject: [S390] Get rid of a lot of sparse warnings. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/kdebug.h | 3 ++- include/asm-s390/pgtable.h | 1 + include/asm-s390/setup.h | 3 +++ include/asm-s390/smp.h | 4 ++++ include/asm-s390/timer.h | 3 +++ include/asm-s390/timex.h | 2 ++ 6 files changed, 15 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-s390/kdebug.h b/include/asm-s390/kdebug.h index 40cc68025e0..1b50f89819a 100644 --- a/include/asm-s390/kdebug.h +++ b/include/asm-s390/kdebug.h @@ -26,7 +26,6 @@ extern int register_page_fault_notifier(struct notifier_block *); extern int unregister_page_fault_notifier(struct notifier_block *); extern struct atomic_notifier_head s390die_chain; - enum die_val { DIE_OOPS = 1, DIE_BPT, @@ -56,4 +55,6 @@ static inline int notify_die(enum die_val val, const char *str, return atomic_notifier_call_chain(&s390die_chain, val, &args); } +extern void die(const char *, struct pt_regs *, long); + #endif diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index ae61aca5d48..304ee773641 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -40,6 +40,7 @@ struct mm_struct; extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096))); extern void paging_init(void); +extern void vmem_map_init(void); /* * The S390 doesn't have any external MMU info: the kernel page diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index 9574fe80a04..542769736fc 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -74,6 +74,9 @@ extern unsigned int console_mode; extern unsigned int console_devno; extern unsigned int console_irq; +extern char vmhalt_cmd[]; +extern char vmpoff_cmd[]; + #define CONSOLE_IS_UNDEFINED (console_mode == 0) #define CONSOLE_IS_SCLP (console_mode == 1) #define CONSOLE_IS_3215 (console_mode == 2) diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h index 7097c96ed02..2d9e15367c0 100644 --- a/include/asm-s390/smp.h +++ b/include/asm-s390/smp.h @@ -31,6 +31,10 @@ typedef struct __u16 cpu; } sigp_info; +extern void machine_restart_smp(char *); +extern void machine_halt_smp(void); +extern void machine_power_off_smp(void); + extern void smp_setup_cpu_possible_map(void); extern int smp_call_function_on(void (*func) (void *info), void *info, int nonatomic, int wait, int cpu); diff --git a/include/asm-s390/timer.h b/include/asm-s390/timer.h index 30e5cbe570f..adb34860a54 100644 --- a/include/asm-s390/timer.h +++ b/include/asm-s390/timer.h @@ -45,6 +45,9 @@ extern void add_virt_timer_periodic(void *new); extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires); extern int del_virt_timer(struct vtimer_list *timer); +extern void init_cpu_vtimer(void); +extern void vtime_init(void); + #endif /* __KERNEL__ */ #endif /* _ASM_S390_TIMER_H */ diff --git a/include/asm-s390/timex.h b/include/asm-s390/timex.h index 4df4a41029a..9ee5d801379 100644 --- a/include/asm-s390/timex.h +++ b/include/asm-s390/timex.h @@ -32,4 +32,6 @@ static inline cycles_t get_cycles(void) return (cycles_t) get_clock() >> 2; } +void init_cpu_timer(void); + #endif -- cgit v1.2.3 From 3b0b4af2c7593af6dfe92afa1033033c4746ec11 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:16:58 +0100 Subject: [S390] Simplify virt_to_phys. No need to use lrag in 64 bit addressing mode since lra will do the same. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/io.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/asm-s390/io.h b/include/asm-s390/io.h index efb7de9c1c6..a4c2d550dad 100644 --- a/include/asm-s390/io.h +++ b/include/asm-s390/io.h @@ -28,11 +28,7 @@ static inline unsigned long virt_to_phys(volatile void * address) { unsigned long real_address; asm volatile( -#ifndef __s390x__ " lra %0,0(%1)\n" -#else /* __s390x__ */ - " lrag %0,0(%1)\n" -#endif /* __s390x__ */ " jz 0f\n" " la %0,0\n" "0:" -- cgit v1.2.3 From c48e09131bd7c632c80a3245688d2d29dbc4f6b5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:17:20 +0100 Subject: [S390] Small barrier() and cpu_relax() cleanup. cpu_relax() has barrier() semantics hence there is no need to use both of them in conjunction in sclp_sync_wait(). Also change cpu_relax() so it's more obvious that it has barrier semantics. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/processor.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h index cbbedc63ba2..5dc6b938895 100644 --- a/include/asm-s390/processor.h +++ b/include/asm-s390/processor.h @@ -201,9 +201,8 @@ unsigned long get_wchan(struct task_struct *p); static inline void cpu_relax(void) { if (MACHINE_HAS_DIAG44) - asm volatile("diag 0,0,68" : : : "memory"); - else - barrier(); + asm volatile("diag 0,0,68"); + barrier(); } /* -- cgit v1.2.3 From 9b241cc862d55038c43feee86670cb7d86cf01c1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:17:38 +0100 Subject: [S390] Add set_fs(USER_DS) to start_thread(). Currently works anyway since search_binary_handler has a set_fs(USER_DS). But start_thread() is the place where this should be done. Following all other architectures... Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/processor.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h index 5dc6b938895..7a7f50efcbd 100644 --- a/include/asm-s390/processor.h +++ b/include/asm-s390/processor.h @@ -144,6 +144,7 @@ struct stack_frame { #ifndef __s390x__ #define start_thread(regs, new_psw, new_stackp) do { \ + set_fs(USER_DS); \ regs->psw.mask = PSW_USER_BITS; \ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ regs->gprs[15] = new_stackp ; \ @@ -152,12 +153,14 @@ struct stack_frame { #else /* __s390x__ */ #define start_thread(regs, new_psw, new_stackp) do { \ + set_fs(USER_DS); \ regs->psw.mask = PSW_USER_BITS; \ regs->psw.addr = new_psw; \ regs->gprs[15] = new_stackp; \ } while (0) #define start_thread31(regs, new_psw, new_stackp) do { \ + set_fs(USER_DS); \ regs->psw.mask = PSW_USER32_BITS; \ regs->psw.addr = new_psw; \ regs->gprs[15] = new_stackp; \ -- cgit v1.2.3 From c1821c2e9711adc3cd298a16b7237c92a2cee78d Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Mon, 5 Feb 2007 21:18:17 +0100 Subject: [S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- include/asm-s390/compat.h | 28 ++++++++ include/asm-s390/lowcore.h | 6 +- include/asm-s390/mmu_context.h | 50 +++++++++----- include/asm-s390/pgalloc.h | 85 ++++++++++++++++++++++-- include/asm-s390/pgtable.h | 146 ++++++++++++++++++++++++++++++++++++----- include/asm-s390/processor.h | 6 +- include/asm-s390/ptrace.h | 11 +--- include/asm-s390/setup.h | 12 ++++ include/asm-s390/smp.h | 2 +- include/asm-s390/system.h | 4 +- include/asm-s390/tlbflush.h | 9 +++ include/asm-s390/uaccess.h | 2 + 12 files changed, 307 insertions(+), 54 deletions(-) (limited to 'include') diff --git a/include/asm-s390/compat.h b/include/asm-s390/compat.h index 356a0b18353..296f4f1a20e 100644 --- a/include/asm-s390/compat.h +++ b/include/asm-s390/compat.h @@ -6,6 +6,34 @@ #include #include +#define PSW32_MASK_PER 0x40000000UL +#define PSW32_MASK_DAT 0x04000000UL +#define PSW32_MASK_IO 0x02000000UL +#define PSW32_MASK_EXT 0x01000000UL +#define PSW32_MASK_KEY 0x00F00000UL +#define PSW32_MASK_MCHECK 0x00040000UL +#define PSW32_MASK_WAIT 0x00020000UL +#define PSW32_MASK_PSTATE 0x00010000UL +#define PSW32_MASK_ASC 0x0000C000UL +#define PSW32_MASK_CC 0x00003000UL +#define PSW32_MASK_PM 0x00000f00UL + +#define PSW32_ADDR_AMODE31 0x80000000UL +#define PSW32_ADDR_INSN 0x7FFFFFFFUL + +#define PSW32_BASE_BITS 0x00080000UL + +#define PSW32_ASC_PRIMARY 0x00000000UL +#define PSW32_ASC_ACCREG 0x00004000UL +#define PSW32_ASC_SECONDARY 0x00008000UL +#define PSW32_ASC_HOME 0x0000C000UL + +#define PSW32_MASK_MERGE(CURRENT,NEW) \ + (((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \ + ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM))) + +extern long psw32_user_bits; + #define COMPAT_USER_HZ 100 typedef u32 compat_size_t; diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h index 74f7389bd3e..4a31d0a7ee8 100644 --- a/include/asm-s390/lowcore.h +++ b/include/asm-s390/lowcore.h @@ -220,7 +220,8 @@ struct _lowcore __u32 kernel_asce; /* 0xc4c */ __u32 user_asce; /* 0xc50 */ __u32 panic_stack; /* 0xc54 */ - __u8 pad10[0xc60-0xc58]; /* 0xc58 */ + __u32 user_exec_asce; /* 0xc58 */ + __u8 pad10[0xc60-0xc5c]; /* 0xc5c */ /* entry.S sensitive area start */ struct cpuinfo_S390 cpu_data; /* 0xc60 */ __u32 ipl_device; /* 0xc7c */ @@ -310,7 +311,8 @@ struct _lowcore __u64 kernel_asce; /* 0xd58 */ __u64 user_asce; /* 0xd60 */ __u64 panic_stack; /* 0xd68 */ - __u8 pad10[0xd80-0xd70]; /* 0xd70 */ + __u64 user_exec_asce; /* 0xd70 */ + __u8 pad10[0xd80-0xd78]; /* 0xd78 */ /* entry.S sensitive area start */ struct cpuinfo_S390 cpu_data; /* 0xd80 */ __u32 ipl_device; /* 0xdb8 */ diff --git a/include/asm-s390/mmu_context.h b/include/asm-s390/mmu_context.h index bcf24a87387..1d21da220d4 100644 --- a/include/asm-s390/mmu_context.h +++ b/include/asm-s390/mmu_context.h @@ -9,6 +9,7 @@ #ifndef __S390_MMU_CONTEXT_H #define __S390_MMU_CONTEXT_H +#include /* * get a new mmu context.. S390 don't know about contexts. */ @@ -16,29 +17,44 @@ #define destroy_context(mm) do { } while (0) +#ifndef __s390x__ +#define LCTL_OPCODE "lctl" +#define PGTABLE_BITS (_SEGMENT_TABLE|USER_STD_MASK) +#else +#define LCTL_OPCODE "lctlg" +#define PGTABLE_BITS (_REGION_TABLE|USER_STD_MASK) +#endif + static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { } static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) + struct task_struct *tsk) { - if (prev != next) { -#ifndef __s390x__ - S390_lowcore.user_asce = (__pa(next->pgd)&PAGE_MASK) | - (_SEGMENT_TABLE|USER_STD_MASK); - /* Load home space page table origin. */ - asm volatile("lctl 13,13,%0" - : : "m" (S390_lowcore.user_asce) ); -#else /* __s390x__ */ - S390_lowcore.user_asce = (__pa(next->pgd) & PAGE_MASK) | - (_REGION_TABLE|USER_STD_MASK); - /* Load home space page table origin. */ - asm volatile("lctlg 13,13,%0" - : : "m" (S390_lowcore.user_asce) ); -#endif /* __s390x__ */ - } + pgd_t *shadow_pgd = get_shadow_pgd(next->pgd); + + if (prev != next) { + S390_lowcore.user_asce = (__pa(next->pgd) & PAGE_MASK) | + PGTABLE_BITS; + if (shadow_pgd) { + /* Load primary/secondary space page table origin. */ + S390_lowcore.user_exec_asce = + (__pa(shadow_pgd) & PAGE_MASK) | PGTABLE_BITS; + asm volatile(LCTL_OPCODE" 1,1,%0\n" + LCTL_OPCODE" 7,7,%1" + : : "m" (S390_lowcore.user_exec_asce), + "m" (S390_lowcore.user_asce) ); + } else if (switch_amode) { + /* Load primary space page table origin. */ + asm volatile(LCTL_OPCODE" 1,1,%0" + : : "m" (S390_lowcore.user_asce) ); + } else + /* Load home space page table origin. */ + asm volatile(LCTL_OPCODE" 13,13,%0" + : : "m" (S390_lowcore.user_asce) ); + } cpu_set(smp_processor_id(), next->cpu_vm_mask); } @@ -51,4 +67,4 @@ static inline void activate_mm(struct mm_struct *prev, set_fs(current->thread.mm_segment); } -#endif +#endif /* __S390_MMU_CONTEXT_H */ diff --git a/include/asm-s390/pgalloc.h b/include/asm-s390/pgalloc.h index 0707a7e2fc1..56c8a6c80e2 100644 --- a/include/asm-s390/pgalloc.h +++ b/include/asm-s390/pgalloc.h @@ -47,6 +47,17 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm) if (!pgd) return NULL; + if (s390_noexec) { + pgd_t *shadow_pgd = (pgd_t *) + __get_free_pages(GFP_KERNEL, PGD_ALLOC_ORDER); + struct page *page = virt_to_page(pgd); + + if (!shadow_pgd) { + free_pages((unsigned long) pgd, PGD_ALLOC_ORDER); + return NULL; + } + page->lru.next = (void *) shadow_pgd; + } for (i = 0; i < PTRS_PER_PGD; i++) #ifndef __s390x__ pmd_clear(pmd_offset(pgd + i, i*PGDIR_SIZE)); @@ -58,6 +69,10 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm) static inline void pgd_free(pgd_t *pgd) { + pgd_t *shadow_pgd = get_shadow_pgd(pgd); + + if (shadow_pgd) + free_pages((unsigned long) shadow_pgd, PGD_ALLOC_ORDER); free_pages((unsigned long) pgd, PGD_ALLOC_ORDER); } @@ -71,6 +86,7 @@ static inline void pgd_free(pgd_t *pgd) #define pmd_free(x) do { } while (0) #define __pmd_free_tlb(tlb,x) do { } while (0) #define pgd_populate(mm, pmd, pte) BUG() +#define pgd_populate_kernel(mm, pmd, pte) BUG() #else /* __s390x__ */ static inline pmd_t * pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) { @@ -79,6 +95,17 @@ static inline pmd_t * pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) if (!pmd) return NULL; + if (s390_noexec) { + pmd_t *shadow_pmd = (pmd_t *) + __get_free_pages(GFP_KERNEL, PMD_ALLOC_ORDER); + struct page *page = virt_to_page(pmd); + + if (!shadow_pmd) { + free_pages((unsigned long) pmd, PMD_ALLOC_ORDER); + return NULL; + } + page->lru.next = (void *) shadow_pmd; + } for (i=0; i < PTRS_PER_PMD; i++) pmd_clear(pmd + i); return pmd; @@ -86,6 +113,10 @@ static inline pmd_t * pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) static inline void pmd_free (pmd_t *pmd) { + pmd_t *shadow_pmd = get_shadow_pmd(pmd); + + if (shadow_pmd) + free_pages((unsigned long) shadow_pmd, PMD_ALLOC_ORDER); free_pages((unsigned long) pmd, PMD_ALLOC_ORDER); } @@ -95,11 +126,22 @@ static inline void pmd_free (pmd_t *pmd) pmd_free(pmd); \ } while (0) -static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) +static inline void +pgd_populate_kernel(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) { pgd_val(*pgd) = _PGD_ENTRY | __pa(pmd); } +static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) +{ + pgd_t *shadow_pgd = get_shadow_pgd(pgd); + pmd_t *shadow_pmd = get_shadow_pmd(pmd); + + if (shadow_pgd && shadow_pmd) + pgd_populate_kernel(mm, shadow_pgd, shadow_pmd); + pgd_populate_kernel(mm, pgd, pmd); +} + #endif /* __s390x__ */ static inline void @@ -119,7 +161,13 @@ pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page) { - pmd_populate_kernel(mm, pmd, (pte_t *)page_to_phys(page)); + pte_t *pte = (pte_t *)page_to_phys(page); + pmd_t *shadow_pmd = get_shadow_pmd(pmd); + pte_t *shadow_pte = get_shadow_pte(pte); + + pmd_populate_kernel(mm, pmd, pte); + if (shadow_pmd && shadow_pte) + pmd_populate_kernel(mm, shadow_pmd, shadow_pte); } /* @@ -133,6 +181,17 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long vmaddr) if (!pte) return NULL; + if (s390_noexec) { + pte_t *shadow_pte = (pte_t *) + __get_free_page(GFP_KERNEL|__GFP_REPEAT); + struct page *page = virt_to_page(pte); + + if (!shadow_pte) { + free_page((unsigned long) pte); + return NULL; + } + page->lru.next = (void *) shadow_pte; + } for (i=0; i < PTRS_PER_PTE; i++) { pte_clear(mm, vmaddr, pte + i); vmaddr += PAGE_SIZE; @@ -151,14 +210,30 @@ pte_alloc_one(struct mm_struct *mm, unsigned long vmaddr) static inline void pte_free_kernel(pte_t *pte) { - free_page((unsigned long) pte); + pte_t *shadow_pte = get_shadow_pte(pte); + + if (shadow_pte) + free_page((unsigned long) shadow_pte); + free_page((unsigned long) pte); } static inline void pte_free(struct page *pte) { - __free_page(pte); + struct page *shadow_page = get_shadow_page(pte); + + if (shadow_page) + __free_page(shadow_page); + __free_page(pte); } -#define __pte_free_tlb(tlb,pte) tlb_remove_page(tlb,pte) +#define __pte_free_tlb(tlb, pte) \ +({ \ + struct mmu_gather *__tlb = (tlb); \ + struct page *__pte = (pte); \ + struct page *shadow_page = get_shadow_page(__pte); \ + if (shadow_page) \ + tlb_remove_page(__tlb, shadow_page); \ + tlb_remove_page(__tlb, __pte); \ +}) #endif /* _S390_PGALLOC_H */ diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index 304ee773641..13c16546eff 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -224,6 +224,8 @@ extern unsigned long vmalloc_end; #define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */ #define _PAGE_TYPE_RO 0x200 #define _PAGE_TYPE_RW 0x000 +#define _PAGE_TYPE_EX_RO 0x202 +#define _PAGE_TYPE_EX_RW 0x002 /* * PTE type bits are rather complicated. handle_pte_fault uses pte_present, @@ -244,11 +246,13 @@ extern unsigned long vmalloc_end; * _PAGE_TYPE_FILE 11?1 -> 11?1 * _PAGE_TYPE_RO 0100 -> 1100 * _PAGE_TYPE_RW 0000 -> 1000 + * _PAGE_TYPE_EX_RO 0110 -> 1110 + * _PAGE_TYPE_EX_RW 0010 -> 1010 * - * pte_none is true for bits combinations 1000, 1100 + * pte_none is true for bits combinations 1000, 1010, 1100, 1110 * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001 * pte_file is true for bits combinations 1101, 1111 - * swap pte is 1011 and 0001, 0011, 0101, 0111, 1010 and 1110 are invalid. + * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid. */ #ifndef __s390x__ @@ -313,33 +317,100 @@ extern unsigned long vmalloc_end; #define PAGE_NONE __pgprot(_PAGE_TYPE_NONE) #define PAGE_RO __pgprot(_PAGE_TYPE_RO) #define PAGE_RW __pgprot(_PAGE_TYPE_RW) +#define PAGE_EX_RO __pgprot(_PAGE_TYPE_EX_RO) +#define PAGE_EX_RW __pgprot(_PAGE_TYPE_EX_RW) #define PAGE_KERNEL PAGE_RW #define PAGE_COPY PAGE_RO /* - * The S390 can't do page protection for execute, and considers that the - * same are read. Also, write permissions imply read permissions. This is - * the closest we can get.. + * Dependent on the EXEC_PROTECT option s390 can do execute protection. + * Write permission always implies read permission. In theory with a + * primary/secondary page table execute only can be implemented but + * it would cost an additional bit in the pte to distinguish all the + * different pte types. To avoid that execute permission currently + * implies read permission as well. */ /*xwr*/ #define __P000 PAGE_NONE #define __P001 PAGE_RO #define __P010 PAGE_RO #define __P011 PAGE_RO -#define __P100 PAGE_RO -#define __P101 PAGE_RO -#define __P110 PAGE_RO -#define __P111 PAGE_RO +#define __P100 PAGE_EX_RO +#define __P101 PAGE_EX_RO +#define __P110 PAGE_EX_RO +#define __P111 PAGE_EX_RO #define __S000 PAGE_NONE #define __S001 PAGE_RO #define __S010 PAGE_RW #define __S011 PAGE_RW -#define __S100 PAGE_RO -#define __S101 PAGE_RO -#define __S110 PAGE_RW -#define __S111 PAGE_RW +#define __S100 PAGE_EX_RO +#define __S101 PAGE_EX_RO +#define __S110 PAGE_EX_RW +#define __S111 PAGE_EX_RW + +#ifndef __s390x__ +# define PMD_SHADOW_SHIFT 1 +# define PGD_SHADOW_SHIFT 1 +#else /* __s390x__ */ +# define PMD_SHADOW_SHIFT 2 +# define PGD_SHADOW_SHIFT 2 +#endif /* __s390x__ */ + +static inline struct page *get_shadow_page(struct page *page) +{ + if (s390_noexec && !list_empty(&page->lru)) + return virt_to_page(page->lru.next); + return NULL; +} + +static inline pte_t *get_shadow_pte(pte_t *ptep) +{ + unsigned long pteptr = (unsigned long) (ptep); + + if (s390_noexec) { + unsigned long offset = pteptr & (PAGE_SIZE - 1); + void *addr = (void *) (pteptr ^ offset); + struct page *page = virt_to_page(addr); + if (!list_empty(&page->lru)) + return (pte_t *) ((unsigned long) page->lru.next | + offset); + } + return NULL; +} + +static inline pmd_t *get_shadow_pmd(pmd_t *pmdp) +{ + unsigned long pmdptr = (unsigned long) (pmdp); + + if (s390_noexec) { + unsigned long offset = pmdptr & + ((PAGE_SIZE << PMD_SHADOW_SHIFT) - 1); + void *addr = (void *) (pmdptr ^ offset); + struct page *page = virt_to_page(addr); + if (!list_empty(&page->lru)) + return (pmd_t *) ((unsigned long) page->lru.next | + offset); + } + return NULL; +} + +static inline pgd_t *get_shadow_pgd(pgd_t *pgdp) +{ + unsigned long pgdptr = (unsigned long) (pgdp); + + if (s390_noexec) { + unsigned long offset = pgdptr & + ((PAGE_SIZE << PGD_SHADOW_SHIFT) - 1); + void *addr = (void *) (pgdptr ^ offset); + struct page *page = virt_to_page(addr); + if (!list_empty(&page->lru)) + return (pgd_t *) ((unsigned long) page->lru.next | + offset); + } + return NULL; +} /* * Certain architectures need to do special things when PTEs @@ -348,7 +419,16 @@ extern unsigned long vmalloc_end; */ static inline void set_pte(pte_t *pteptr, pte_t pteval) { + pte_t *shadow_pte = get_shadow_pte(pteptr); + *pteptr = pteval; + if (shadow_pte) { + if (!(pte_val(pteval) & _PAGE_INVALID) && + (pte_val(pteval) & _PAGE_SWX)) + pte_val(*shadow_pte) = pte_val(pteval) | _PAGE_RO; + else + pte_val(*shadow_pte) = _PAGE_TYPE_EMPTY; + } } #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) @@ -466,7 +546,7 @@ static inline int pte_read(pte_t pte) static inline void pgd_clear(pgd_t * pgdp) { } -static inline void pmd_clear(pmd_t * pmdp) +static inline void pmd_clear_kernel(pmd_t * pmdp) { pmd_val(pmdp[0]) = _PAGE_TABLE_INV; pmd_val(pmdp[1]) = _PAGE_TABLE_INV; @@ -474,24 +554,55 @@ static inline void pmd_clear(pmd_t * pmdp) pmd_val(pmdp[3]) = _PAGE_TABLE_INV; } +static inline void pmd_clear(pmd_t * pmdp) +{ + pmd_t *shadow_pmd = get_shadow_pmd(pmdp); + + pmd_clear_kernel(pmdp); + if (shadow_pmd) + pmd_clear_kernel(shadow_pmd); +} + #else /* __s390x__ */ -static inline void pgd_clear(pgd_t * pgdp) +static inline void pgd_clear_kernel(pgd_t * pgdp) { pgd_val(*pgdp) = _PGD_ENTRY_INV | _PGD_ENTRY; } -static inline void pmd_clear(pmd_t * pmdp) +static inline void pgd_clear(pgd_t * pgdp) +{ + pgd_t *shadow_pgd = get_shadow_pgd(pgdp); + + pgd_clear_kernel(pgdp); + if (shadow_pgd) + pgd_clear_kernel(shadow_pgd); +} + +static inline void pmd_clear_kernel(pmd_t * pmdp) { pmd_val(*pmdp) = _PMD_ENTRY_INV | _PMD_ENTRY; pmd_val1(*pmdp) = _PMD_ENTRY_INV | _PMD_ENTRY; } +static inline void pmd_clear(pmd_t * pmdp) +{ + pmd_t *shadow_pmd = get_shadow_pmd(pmdp); + + pmd_clear_kernel(pmdp); + if (shadow_pmd) + pmd_clear_kernel(shadow_pmd); +} + #endif /* __s390x__ */ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { + pte_t *shadow_pte = get_shadow_pte(ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + if (shadow_pte) + pte_val(*shadow_pte) = _PAGE_TYPE_EMPTY; } /* @@ -609,8 +720,11 @@ ptep_clear_flush(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) { pte_t pte = *ptep; + pte_t *shadow_pte = get_shadow_pte(ptep); __ptep_ipte(address, ptep); + if (shadow_pte) + __ptep_ipte(address, shadow_pte); return pte; } diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h index 7a7f50efcbd..5af853576cb 100644 --- a/include/asm-s390/processor.h +++ b/include/asm-s390/processor.h @@ -145,7 +145,7 @@ struct stack_frame { #define start_thread(regs, new_psw, new_stackp) do { \ set_fs(USER_DS); \ - regs->psw.mask = PSW_USER_BITS; \ + regs->psw.mask = psw_user_bits; \ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ regs->gprs[15] = new_stackp ; \ } while (0) @@ -154,14 +154,14 @@ struct stack_frame { #define start_thread(regs, new_psw, new_stackp) do { \ set_fs(USER_DS); \ - regs->psw.mask = PSW_USER_BITS; \ + regs->psw.mask = psw_user_bits; \ regs->psw.addr = new_psw; \ regs->gprs[15] = new_stackp; \ } while (0) #define start_thread31(regs, new_psw, new_stackp) do { \ set_fs(USER_DS); \ - regs->psw.mask = PSW_USER32_BITS; \ + regs->psw.mask = psw_user32_bits; \ regs->psw.addr = new_psw; \ regs->gprs[15] = new_stackp; \ } while (0) diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h index 7b768c5c68a..fa6ca87080e 100644 --- a/include/asm-s390/ptrace.h +++ b/include/asm-s390/ptrace.h @@ -266,17 +266,12 @@ typedef struct #define PSW_ASC_SECONDARY 0x0000800000000000UL #define PSW_ASC_HOME 0x0000C00000000000UL -#define PSW_USER32_BITS (PSW_BASE32_BITS | PSW_MASK_DAT | PSW_ASC_HOME | \ - PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | \ - PSW_MASK_PSTATE | PSW_DEFAULT_KEY) +extern long psw_user32_bits; #endif /* __s390x__ */ -#define PSW_KERNEL_BITS (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY | \ - PSW_MASK_MCHECK | PSW_DEFAULT_KEY) -#define PSW_USER_BITS (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | \ - PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | \ - PSW_MASK_PSTATE | PSW_DEFAULT_KEY) +extern long psw_kernel_bits; +extern long psw_user_bits; /* This macro merges a NEW PSW mask specified by the user into the currently active PSW mask CURRENT, modifying only those diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index 542769736fc..6b68ddda39a 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -42,6 +42,18 @@ struct mem_chunk { extern struct mem_chunk memory_chunk[]; +#ifdef CONFIG_S390_SWITCH_AMODE +extern unsigned int switch_amode; +#else +#define switch_amode (0) +#endif + +#ifdef CONFIG_S390_EXEC_PROTECT +extern unsigned int s390_noexec; +#else +#define s390_noexec (0) +#endif + /* * Machine features detected in head.S */ diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h index 2d9e15367c0..b957e4cda46 100644 --- a/include/asm-s390/smp.h +++ b/include/asm-s390/smp.h @@ -110,7 +110,7 @@ smp_call_function_on(void (*func) (void *info), void *info, static inline void smp_send_stop(void) { /* Disable all interrupts/machine checks */ - __load_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK); + __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK); } #define smp_cpu_not_running(cpu) 1 diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h index bd0b05ae87d..bbe137c3ed6 100644 --- a/include/asm-s390/system.h +++ b/include/asm-s390/system.h @@ -373,8 +373,8 @@ __set_psw_mask(unsigned long mask) __load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8))); } -#define local_mcck_enable() __set_psw_mask(PSW_KERNEL_BITS) -#define local_mcck_disable() __set_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK) +#define local_mcck_enable() __set_psw_mask(psw_kernel_bits) +#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK) #ifdef CONFIG_SMP diff --git a/include/asm-s390/tlbflush.h b/include/asm-s390/tlbflush.h index fa4dc916a9b..66793f55c8b 100644 --- a/include/asm-s390/tlbflush.h +++ b/include/asm-s390/tlbflush.h @@ -3,6 +3,7 @@ #include #include +#include /* * TLB flushing: @@ -102,6 +103,14 @@ static inline void __flush_tlb_mm(struct mm_struct * mm) if (unlikely(cpus_empty(mm->cpu_vm_mask))) return; if (MACHINE_HAS_IDTE) { + pgd_t *shadow_pgd = get_shadow_pgd(mm->pgd); + + if (shadow_pgd) { + asm volatile( + " .insn rrf,0xb98e0000,0,%0,%1,0" + : : "a" (2048), + "a" (__pa(shadow_pgd) & PAGE_MASK) : "cc" ); + } asm volatile( " .insn rrf,0xb98e0000,0,%0,%1,0" : : "a" (2048), "a" (__pa(mm->pgd)&PAGE_MASK) : "cc"); diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h index 73ac4e82217..0235970278f 100644 --- a/include/asm-s390/uaccess.h +++ b/include/asm-s390/uaccess.h @@ -90,6 +90,8 @@ struct uaccess_ops { extern struct uaccess_ops uaccess; extern struct uaccess_ops uaccess_std; extern struct uaccess_ops uaccess_mvcos; +extern struct uaccess_ops uaccess_mvcos_switch; +extern struct uaccess_ops uaccess_pt; static inline int __put_user_fn(size_t size, void __user *ptr, void *x) { -- cgit v1.2.3 From d54853ef8cb17296ac7bce9c77430fb7c80532d0 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 5 Feb 2007 21:18:19 +0100 Subject: [S390] ETR support. This patch adds support for clock synchronization to an external time reference (ETR). The external time reference sends an oscillator signal and a synchronization signal every 2^20 microseconds to keep the TOD clocks of all connected servers in sync. For availability two ETR units can be connected to a machine. If the clock deviates for more than the sync-check tolerance all cpus get a machine check that indicates that the clock is out of sync. For the lovely details how to get the clock back in sync see the code below. Signed-off-by: Martin Schwidefsky --- include/asm-s390/etr.h | 219 +++++++++++++++++++++++++++++++++++++++++++++ include/asm-s390/hardirq.h | 2 +- include/asm-s390/timex.h | 36 ++++++++ 3 files changed, 256 insertions(+), 1 deletion(-) create mode 100644 include/asm-s390/etr.h (limited to 'include') diff --git a/include/asm-s390/etr.h b/include/asm-s390/etr.h new file mode 100644 index 00000000000..b498f19bb9a --- /dev/null +++ b/include/asm-s390/etr.h @@ -0,0 +1,219 @@ +/* + * include/asm-s390/etr.h + * + * Copyright IBM Corp. 2006 + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + */ +#ifndef __S390_ETR_H +#define __S390_ETR_H + +/* ETR attachment control register */ +struct etr_eacr { + unsigned int e0 : 1; /* port 0 stepping control */ + unsigned int e1 : 1; /* port 1 stepping control */ + unsigned int _pad0 : 5; /* must be 00100 */ + unsigned int dp : 1; /* data port control */ + unsigned int p0 : 1; /* port 0 change recognition control */ + unsigned int p1 : 1; /* port 1 change recognition control */ + unsigned int _pad1 : 3; /* must be 000 */ + unsigned int ea : 1; /* ETR alert control */ + unsigned int es : 1; /* ETR sync check control */ + unsigned int sl : 1; /* switch to local control */ +} __attribute__ ((packed)); + +/* Port state returned by steai */ +enum etr_psc { + etr_psc_operational = 0, + etr_psc_semi_operational = 1, + etr_psc_protocol_error = 4, + etr_psc_no_symbols = 8, + etr_psc_no_signal = 12, + etr_psc_pps_mode = 13 +}; + +/* Logical port state returned by stetr */ +enum etr_lpsc { + etr_lpsc_operational_step = 0, + etr_lpsc_operational_alt = 1, + etr_lpsc_semi_operational = 2, + etr_lpsc_protocol_error = 4, + etr_lpsc_no_symbol_sync = 8, + etr_lpsc_no_signal = 12, + etr_lpsc_pps_mode = 13 +}; + +/* ETR status words */ +struct etr_esw { + struct etr_eacr eacr; /* attachment control register */ + unsigned int y : 1; /* stepping mode */ + unsigned int _pad0 : 5; /* must be 00000 */ + unsigned int p : 1; /* stepping port number */ + unsigned int q : 1; /* data port number */ + unsigned int psc0 : 4; /* port 0 state code */ + unsigned int psc1 : 4; /* port 1 state code */ +} __attribute__ ((packed)); + +/* Second level data register status word */ +struct etr_slsw { + unsigned int vv1 : 1; /* copy of validity bit data frame 1 */ + unsigned int vv2 : 1; /* copy of validity bit data frame 2 */ + unsigned int vv3 : 1; /* copy of validity bit data frame 3 */ + unsigned int vv4 : 1; /* copy of validity bit data frame 4 */ + unsigned int _pad0 : 19; /* must by all zeroes */ + unsigned int n : 1; /* EAF port number */ + unsigned int v1 : 1; /* validity bit ETR data frame 1 */ + unsigned int v2 : 1; /* validity bit ETR data frame 2 */ + unsigned int v3 : 1; /* validity bit ETR data frame 3 */ + unsigned int v4 : 1; /* validity bit ETR data frame 4 */ + unsigned int _pad1 : 4; /* must be 0000 */ +} __attribute__ ((packed)); + +/* ETR data frames */ +struct etr_edf1 { + unsigned int u : 1; /* untuned bit */ + unsigned int _pad0 : 1; /* must be 0 */ + unsigned int r : 1; /* service request bit */ + unsigned int _pad1 : 4; /* must be 0000 */ + unsigned int a : 1; /* time adjustment bit */ + unsigned int net_id : 8; /* ETR network id */ + unsigned int etr_id : 8; /* id of ETR which sends data frames */ + unsigned int etr_pn : 8; /* port number of ETR output port */ +} __attribute__ ((packed)); + +struct etr_edf2 { + unsigned int etv : 32; /* Upper 32 bits of TOD. */ +} __attribute__ ((packed)); + +struct etr_edf3 { + unsigned int rc : 8; /* failure reason code */ + unsigned int _pad0 : 3; /* must be 000 */ + unsigned int c : 1; /* ETR coupled bit */ + unsigned int tc : 4; /* ETR type code */ + unsigned int blto : 8; /* biased local time offset */ + /* (blto - 128) * 15 = minutes */ + unsigned int buo : 8; /* biased utc offset */ + /* (buo - 128) = leap seconds */ +} __attribute__ ((packed)); + +struct etr_edf4 { + unsigned int ed : 8; /* ETS device dependent data */ + unsigned int _pad0 : 1; /* must be 0 */ + unsigned int buc : 5; /* biased ut1 correction */ + /* (buc - 16) * 0.1 seconds */ + unsigned int em : 6; /* ETS error magnitude */ + unsigned int dc : 6; /* ETS drift code */ + unsigned int sc : 6; /* ETS steering code */ +} __attribute__ ((packed)); + +/* + * ETR attachment information block, two formats + * format 1 has 4 reserved words with a size of 64 bytes + * format 2 has 16 reserved words with a size of 96 bytes + */ +struct etr_aib { + struct etr_esw esw; + struct etr_slsw slsw; + unsigned long long tsp; + struct etr_edf1 edf1; + struct etr_edf2 edf2; + struct etr_edf3 edf3; + struct etr_edf4 edf4; + unsigned int reserved[16]; +} __attribute__ ((packed,aligned(8))); + +/* ETR interruption parameter */ +struct etr_interruption_parameter { + unsigned int _pad0 : 8; + unsigned int pc0 : 1; /* port 0 state change */ + unsigned int pc1 : 1; /* port 1 state change */ + unsigned int _pad1 : 3; + unsigned int eai : 1; /* ETR alert indication */ + unsigned int _pad2 : 18; +} __attribute__ ((packed)); + +/* Query TOD offset result */ +struct etr_ptff_qto { + unsigned long long physical_clock; + unsigned long long tod_offset; + unsigned long long logical_tod_offset; + unsigned long long tod_epoch_difference; +} __attribute__ ((packed)); + +/* Inline assembly helper functions */ +static inline int etr_setr(struct etr_eacr *ctrl) +{ + int rc = -ENOSYS; + + asm volatile( + " .insn s,0xb2160000,0(%2)\n" + "0: la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (rc) : "m" (*ctrl), "a" (ctrl)); + return rc; +} + +/* Stores a format 1 aib with 64 bytes */ +static inline int etr_stetr(struct etr_aib *aib) +{ + int rc = -ENOSYS; + + asm volatile( + " .insn s,0xb2170000,0(%2)\n" + "0: la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (rc) : "m" (*aib), "a" (aib)); + return rc; +} + +/* Stores a format 2 aib with 96 bytes for specified port */ +static inline int etr_steai(struct etr_aib *aib, unsigned int func) +{ + register unsigned int reg0 asm("0") = func; + int rc = -ENOSYS; + + asm volatile( + " .insn s,0xb2b30000,0(%2)\n" + "0: la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0)); + return rc; +} + +/* Function codes for the steai instruction. */ +#define ETR_STEAI_STEPPING_PORT 0x10 +#define ETR_STEAI_ALTERNATE_PORT 0x11 +#define ETR_STEAI_PORT_0 0x12 +#define ETR_STEAI_PORT_1 0x13 + +static inline int etr_ptff(void *ptff_block, unsigned int func) +{ + register unsigned int reg0 asm("0") = func; + register unsigned long reg1 asm("1") = (unsigned long) ptff_block; + int rc = -ENOSYS; + + asm volatile( + " .word 0x0104\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (rc), "=m" (ptff_block) + : "d" (reg0), "d" (reg1), "m" (ptff_block) : "cc"); + return rc; +} + +/* Function codes for the ptff instruction. */ +#define ETR_PTFF_QAF 0x00 /* query available functions */ +#define ETR_PTFF_QTO 0x01 /* query tod offset */ +#define ETR_PTFF_QSI 0x02 /* query steering information */ +#define ETR_PTFF_ATO 0x40 /* adjust tod offset */ +#define ETR_PTFF_STO 0x41 /* set tod offset */ +#define ETR_PTFF_SFS 0x42 /* set fine steering rate */ +#define ETR_PTFF_SGS 0x43 /* set gross steering rate */ + +/* Functions needed by the machine check handler */ +extern void etr_switch_to_local(void); +extern void etr_sync_check(void); + +#endif /* __S390_ETR_H */ diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h index c2f6a8782d3..31beb18cb3d 100644 --- a/include/asm-s390/hardirq.h +++ b/include/asm-s390/hardirq.h @@ -32,6 +32,6 @@ typedef struct { #define HARDIRQ_BITS 8 -extern void account_ticks(void); +extern void account_ticks(u64 time); #endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-s390/timex.h b/include/asm-s390/timex.h index 9ee5d801379..5cbd55cb40c 100644 --- a/include/asm-s390/timex.h +++ b/include/asm-s390/timex.h @@ -11,6 +11,41 @@ #ifndef _ASM_S390_TIMEX_H #define _ASM_S390_TIMEX_H +/* Inline functions for clock register access. */ +static inline int set_clock(__u64 time) +{ + int cc; + + asm volatile( + " sck 0(%2)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc) : "m" (time), "a" (&time) : "cc"); + return cc; +} + +static inline int store_clock(__u64 *time) +{ + int cc; + + asm volatile( + " stck 0(%2)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc), "=m" (*time) : "a" (time) : "cc"); + return cc; +} + +static inline void set_clock_comparator(__u64 time) +{ + asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time)); +} + +static inline void store_clock_comparator(__u64 *time) +{ + asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time)); +} + #define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ typedef unsigned long long cycles_t; @@ -32,6 +67,7 @@ static inline cycles_t get_cycles(void) return (cycles_t) get_clock() >> 2; } +int get_sync_clock(unsigned long long *clock); void init_cpu_timer(void); #endif -- cgit v1.2.3 From 1b2782948997cf5a0d1747de13d43ba7dfa7c543 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 5 Feb 2007 21:18:22 +0100 Subject: [S390] Support for s390 Pseudo Random Number Generator Starting with the z9 the CPU Cryptographic Assist Facility comes with an integrated Pseudo Random Number Generator. The generator creates random numbers by an algorithm similar to the ANSI X9.17 standard. The pseudo-random numbers can be accessed via a character device driver node called /dev/prandom. Similar to /dev/urandom any amount of bytes can be read from the device without blocking. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- include/asm-s390/timex.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/asm-s390/timex.h b/include/asm-s390/timex.h index 5cbd55cb40c..98229db2431 100644 --- a/include/asm-s390/timex.h +++ b/include/asm-s390/timex.h @@ -62,6 +62,18 @@ static inline unsigned long long get_clock (void) return clk; } +static inline void get_clock_extended(void *dest) +{ + typedef struct { unsigned long long clk[2]; } __clock_t; + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + asm volatile("stcke %0" : "=Q" (*((__clock_t *)dest)) : : "cc"); +#else /* __GNUC__ */ + asm volatile("stcke 0(%1)" : "=m" (*((__clock_t *)dest)) + : "a" ((__clock_t *)dest) : "cc"); +#endif /* __GNUC__ */ +} + static inline cycles_t get_cycles(void) { return (cycles_t) get_clock() >> 2; -- cgit v1.2.3 From fe355b7f1c7400cbb71762a1237461be03f88265 Mon Sep 17 00:00:00 2001 From: Hongjie Yang Date: Mon, 5 Feb 2007 21:18:24 +0100 Subject: [S390] boot from NSS support Add support to boot from a named saved segment (NSS). Signed-off-by: Hongjie Yang Signed-off-by: Martin Schwidefsky --- include/asm-s390/setup.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index 6b68ddda39a..3388bb52597 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -156,13 +156,19 @@ struct ipl_parameter_block { extern u32 ipl_flags; extern u16 ipl_devno; -void do_reipl(void); +extern void do_reipl(void); +extern void ipl_save_parameters(void); enum { IPL_DEVNO_VALID = 1, IPL_PARMBLOCK_VALID = 2, + IPL_NSS_VALID = 4, }; +#define NSS_NAME_SIZE 8 + +extern char kernel_nss_name[]; + #define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \ IPL_PARMBLOCK_ORIGIN) #define IPL_PARMBLOCK_SIZE (IPL_PARMBLOCK_START->hdr.len) -- cgit v1.2.3 From cced1dd42ebcebc7fa7f02fe487e48aa71752401 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 5 Feb 2007 21:18:26 +0100 Subject: [S390] Add crypto support for 3592 tape devices 3592 tape devices are able to write data encrpyted on tape mediums. This z/Linux device driver support includes the following functions: * ioctl to switch on/off encryption * ioctl to query encryption status of drive * ioctls to set and query key encrypting keys (kekls) * long busy interrupt handling Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- include/asm-s390/tape390.h | 72 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 68 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-s390/tape390.h b/include/asm-s390/tape390.h index f1d66ba0dee..884fba48f1f 100644 --- a/include/asm-s390/tape390.h +++ b/include/asm-s390/tape390.h @@ -1,11 +1,11 @@ /************************************************************************* * * tape390.h - * enables user programs to display messages on the tape device + * enables user programs to display messages and control encryption + * on s390 tape devices * - * S390 and zSeries version - * Copyright (C) 2001 IBM Corporation - * Author(s): Despina Papadopoulou + * Copyright IBM Corp. 2001,2006 + * Author(s): Michael Holzheu * *************************************************************************/ @@ -36,4 +36,68 @@ typedef struct display_struct { char message2[8]; } display_struct; +/* + * Tape encryption support + */ + +struct tape390_crypt_info { + char capability; + char status; + char medium_status; +} __attribute__ ((packed)); + + +/* Macros for "capable" field */ +#define TAPE390_CRYPT_SUPPORTED_MASK 0x01 +#define TAPE390_CRYPT_SUPPORTED(x) \ + ((x.capability & TAPE390_CRYPT_SUPPORTED_MASK)) + +/* Macros for "status" field */ +#define TAPE390_CRYPT_ON_MASK 0x01 +#define TAPE390_CRYPT_ON(x) (((x.status) & TAPE390_CRYPT_ON_MASK)) + +/* Macros for "medium status" field */ +#define TAPE390_MEDIUM_LOADED_MASK 0x01 +#define TAPE390_MEDIUM_ENCRYPTED_MASK 0x02 +#define TAPE390_MEDIUM_ENCRYPTED(x) \ + (((x.medium_status) & TAPE390_MEDIUM_ENCRYPTED_MASK)) +#define TAPE390_MEDIUM_LOADED(x) \ + (((x.medium_status) & TAPE390_MEDIUM_LOADED_MASK)) + +/* + * The TAPE390_CRYPT_SET ioctl is used to switch on/off encryption. + * The "encryption_capable" and "tape_status" fields are ignored for this ioctl! + */ +#define TAPE390_CRYPT_SET _IOW('d', 2, struct tape390_crypt_info) + +/* + * The TAPE390_CRYPT_QUERY ioctl is used to query the encryption state. + */ +#define TAPE390_CRYPT_QUERY _IOR('d', 3, struct tape390_crypt_info) + +/* Values for "kekl1/2_type" and "kekl1/2_type_on_tape" fields */ +#define TAPE390_KEKL_TYPE_NONE 0 +#define TAPE390_KEKL_TYPE_LABEL 1 +#define TAPE390_KEKL_TYPE_HASH 2 + +struct tape390_kekl { + unsigned char type; + unsigned char type_on_tape; + char label[65]; +} __attribute__ ((packed)); + +struct tape390_kekl_pair { + struct tape390_kekl kekl[2]; +} __attribute__ ((packed)); + +/* + * The TAPE390_KEKL_SET ioctl is used to set Key Encrypting Key labels. + */ +#define TAPE390_KEKL_SET _IOW('d', 4, struct tape390_kekl_pair) + +/* + * The TAPE390_KEKL_QUERY ioctl is used to query Key Encrypting Key labels. + */ +#define TAPE390_KEKL_QUERY _IOR('d', 5, struct tape390_kekl_pair) + #endif -- cgit v1.2.3 From 31ee4b2f40994e8b21691f85cdd4052551a789b7 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 5 Feb 2007 21:18:31 +0100 Subject: [S390] Calibrate delay and bogomips. Preset the bogomips number to the cpu capacity value reported by store system information in SYSIB 1.2.2. This value is constant for a particular machine model and can be used to determine relative performance differences between machines. Signed-off-by: Martin Schwidefsky --- include/asm-s390/processor.h | 1 + include/asm-s390/sfp-util.h | 66 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+) create mode 100644 include/asm-s390/sfp-util.h (limited to 'include') diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h index 5af853576cb..cf71c544924 100644 --- a/include/asm-s390/processor.h +++ b/include/asm-s390/processor.h @@ -50,6 +50,7 @@ struct cpuinfo_S390 unsigned long pgtable_cache_sz; }; +extern void s390_adjust_jiffies(void); extern void print_cpu_info(struct cpuinfo_S390 *); /* Lazy FPU handling on uni-processor */ diff --git a/include/asm-s390/sfp-util.h b/include/asm-s390/sfp-util.h new file mode 100644 index 00000000000..8cabcd23d97 --- /dev/null +++ b/include/asm-s390/sfp-util.h @@ -0,0 +1,66 @@ +#include +#include +#include +#include + +#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " alr %1,%3\n" \ + " brc 12,0f\n" \ + " ahi %0,1\n" \ + "0: alr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ +}) + +#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " slr %1,%3\n" \ + " brc 3,0f\n" \ + " ahi %0,-1\n" \ + "0: slr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ +}) + +/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */ +#define umul_ppmm(wh, wl, u, v) ({ \ + unsigned int __wh = u; \ + unsigned int __wl = v; \ + asm volatile( \ + " ltr 1,%0\n" \ + " mr 0,%1\n" \ + " jnm 0f\n" \ + " alr 0,%1\n" \ + "0: ltr %1,%1\n" \ + " jnm 1f\n" \ + " alr 0,%0\n" \ + "1: lr %0,0\n" \ + " lr %1,1\n" \ + : "+d" (__wh), "+d" (__wl) \ + : : "0", "1", "cc"); \ + wh = __wh; \ + wl = __wl; \ +}) + +#define udiv_qrnnd(q, r, n1, n0, d) \ + do { unsigned int __r; \ + (q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \ + (r) = __r; \ + } while (0) +extern unsigned long __udiv_qrnnd (unsigned int *, unsigned int, + unsigned int , unsigned int); + +#define UDIV_NEEDS_NORMALIZATION 0 + +#define abort() return 0 + +#define __BYTE_ORDER __BIG_ENDIAN -- cgit v1.2.3 From ab14de6c37fae22911ba99f4171613e6d758050b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:18:37 +0100 Subject: [S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/processor.h | 12 ++++++++++++ include/asm-s390/reset.h | 3 --- include/asm-s390/sclp.h | 39 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 3 deletions(-) create mode 100644 include/asm-s390/sclp.h (limited to 'include') diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h index cf71c544924..4c1b7394035 100644 --- a/include/asm-s390/processor.h +++ b/include/asm-s390/processor.h @@ -330,6 +330,18 @@ static inline void disabled_wait(unsigned long code) #endif /* __s390x__ */ } +/* + * Basic Machine Check/Program Check Handler. + */ + +extern void s390_base_mcck_handler(void); +extern void s390_base_pgm_handler(void); +extern void s390_base_ext_handler(void); + +extern void (*s390_base_mcck_handler_fn)(void); +extern void (*s390_base_pgm_handler_fn)(void); +extern void (*s390_base_ext_handler_fn)(void); + /* * CPU idle notifier chain. */ diff --git a/include/asm-s390/reset.h b/include/asm-s390/reset.h index 532e65a2aaf..f584f4a5258 100644 --- a/include/asm-s390/reset.h +++ b/include/asm-s390/reset.h @@ -18,7 +18,4 @@ struct reset_call { extern void register_reset_call(struct reset_call *reset); extern void unregister_reset_call(struct reset_call *reset); extern void s390_reset_system(void); -extern void (*s390_reset_mcck_handler)(void); -extern void (*s390_reset_pgm_handler)(void); - #endif /* _ASM_S390_RESET_H */ diff --git a/include/asm-s390/sclp.h b/include/asm-s390/sclp.h new file mode 100644 index 00000000000..468b9701840 --- /dev/null +++ b/include/asm-s390/sclp.h @@ -0,0 +1,39 @@ +/* + * include/asm-s390/sclp.h + * + * Copyright IBM Corp. 2007 + * Author(s): Heiko Carstens + */ + +#ifndef _ASM_S390_SCLP_H +#define _ASM_S390_SCLP_H + +#include + +struct sccb_header { + u16 length; + u8 function_code; + u8 control_mask[3]; + u16 response_code; +} __attribute__((packed)); + +#define LOADPARM_LEN 8 + +struct sclp_readinfo_sccb { + struct sccb_header header; /* 0-7 */ + u16 rnmax; /* 8-9 */ + u8 rnsize; /* 10 */ + u8 _reserved0[24 - 11]; /* 11-23 */ + u8 loadparm[LOADPARM_LEN]; /* 24-31 */ + u8 _reserved1[91 - 32]; /* 32-90 */ + u8 flags; /* 91 */ + u8 _reserved2[100 - 92]; /* 92-99 */ + u32 rnsize2; /* 100-103 */ + u64 rnmax2; /* 104-111 */ + u8 _reserved3[4096 - 112]; /* 112-4095 */ +} __attribute__((packed, aligned(4096))); + +extern struct sclp_readinfo_sccb s390_readinfo_sccb; +extern void sclp_readinfo_early(void); + +#endif /* _ASM_S390_SCLP_H */ -- cgit v1.2.3 From 162e006ef59266b9ebf34e3d15ca1f3d9ee956d7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:18:41 +0100 Subject: [S390] Mark kernel text section read-only. Set read-only flag in the page table entries for the kernel image text section. This will catch all instruction caused corruptions withing the text section. Instruction replacement via kprobes still works, since it bypasses now dynamic address translation. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/sections.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-s390/sections.h b/include/asm-s390/sections.h index 3a0b8ffeab7..1c5a2c4ccda 100644 --- a/include/asm-s390/sections.h +++ b/include/asm-s390/sections.h @@ -3,4 +3,6 @@ #include +extern char _eshared[]; + #endif -- cgit v1.2.3 From 90f9d70a582c02f50b4dd847166cd5b037219891 Mon Sep 17 00:00:00 2001 From: "bibo,mao" Date: Wed, 31 Jan 2007 17:50:31 +0800 Subject: [IA64] enable singlestep on system call As is pointed out in http://www.gelato.org/community/view_linear.php?id=1_1036&from=authors&value=Ian%20Wienand#1_1039, if single step on break instruction, the break fault has higher priority than the single-step trap. When the break fault handler is entered, it advances the IP by 1 instruction so break instruction single-stepping is skipped, actually it is next instruction which is single stepped. This patch modifies this, it adds TIF_SINGLESTEP bit for thread flags, and generate a fake sigtrap when single stepping break instruction. Test case in attachment can verify this. Any comments is welcome. Signed-off-by: bibo, mao Signed-off-by: Tony Luck --- include/asm-ia64/thread_info.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h index 9b505b25544..91698599f91 100644 --- a/include/asm-ia64/thread_info.h +++ b/include/asm-ia64/thread_info.h @@ -84,6 +84,7 @@ struct thread_info { #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_SYSCALL_TRACE 3 /* syscall trace active */ #define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */ +#define TIF_SINGLESTEP 5 /* restore singlestep on return to user mode */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 17 #define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */ @@ -92,7 +93,8 @@ struct thread_info { #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -- cgit v1.2.3 From f5cd7872768d5856b1b409a33f516e5ac7798f75 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 31 Jan 2007 21:43:54 -0600 Subject: PA Semi PWRficient Ethernet driver Driver for the PA Semi PWRficient on-chip Ethernet (1/10G) Basic enablement, will be complemented with performance enhancements over time. PHY support will be added as well. Signed-off-by: Olof Johansson Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3d1d21035de..7098961cc86 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2066,6 +2066,8 @@ #define PCI_VENDOR_ID_TDI 0x192E #define PCI_DEVICE_ID_TDI_EHCI 0x0101 +#define PCI_VENDOR_ID_PASEMI 0x1959 + #define PCI_VENDOR_ID_JMICRON 0x197B #define PCI_DEVICE_ID_JMICRON_JMB360 0x2360 #define PCI_DEVICE_ID_JMICRON_JMB361 0x2361 -- cgit v1.2.3 From f43691ef8a816018a0294c5a9fa9d22512886c49 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 15 Jan 2007 09:33:55 -0700 Subject: [IA64] remove bogus prototype ia64_esi_init() This function doesn't exist. Signed-off-by: Alex Williamson Signed-off-by: Tony Luck --- include/asm-ia64/esi.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-ia64/esi.h b/include/asm-ia64/esi.h index 84aac0e0b58..40991c6ba64 100644 --- a/include/asm-ia64/esi.h +++ b/include/asm-ia64/esi.h @@ -19,7 +19,6 @@ enum esi_proc_type { ESI_PROC_REENTRANT /* MP-safe and reentrant */ }; -extern int ia64_esi_init (void); extern struct ia64_sal_retval esi_call_phys (void *, u64 *); extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *, enum esi_proc_type, -- cgit v1.2.3 From 139b830477ccdca21b68c40f9a83ec327e65eb56 Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 30 Jan 2007 02:11:09 -0800 Subject: [IA64] register memory ranges in a consistent manner While pursuing and unrelated issue with 64Mb granules I noticed a problem related to inconsistent use of add_active_range. There doesn't appear any reason to me why FLATMEM versus DISCONTIG_MEM should register memory to add_active_range with different code. So I've changed the code into a common implementation. The other subtle issue fixed by this patch was calling add_active_range in count_node_pages before granule aligning is performed. We were lucky with 16MB granules but not so with 64MB granules. count_node_pages has reserved regions filtered out and as a consequence linked kernel text and data aren't covered by calls to count_node_pages. So linked kernel regions wasn't reported to add_active_regions. This resulted in free_initmem causing numerous bad_page reports. This won't occur with this patch because now all known memory regions are reported by register_active_ranges. Acked-by: Mel Gorman Signed-off-by: Bob Picco Acked-by: Simon Horman Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- include/asm-ia64/meminit.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h index c8df7590108..6dd476b652c 100644 --- a/include/asm-ia64/meminit.h +++ b/include/asm-ia64/meminit.h @@ -51,12 +51,13 @@ extern void efi_memmap_init(unsigned long *, unsigned long *); #define IGNORE_PFN0 1 /* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */ +extern int register_active_ranges(u64 start, u64 end, void *arg); + #ifdef CONFIG_VIRTUAL_MEM_MAP # define LARGE_GAP 0x40000000 /* Use virtual mem map if hole is > than this */ extern unsigned long vmalloc_end; extern struct page *vmem_map; extern int find_largest_hole (u64 start, u64 end, void *arg); - extern int register_active_ranges (u64 start, u64 end, void *arg); extern int create_mem_map_page_table (u64 start, u64 end, void *arg); extern int vmemmap_find_next_valid_pfn(int, int); #else -- cgit v1.2.3 From 71120061f271f00d8280659bf12e065ca6533d4d Mon Sep 17 00:00:00 2001 From: Kirill Korotaev Date: Mon, 5 Feb 2007 16:20:00 -0800 Subject: [IA64] virt_to_page() can be called with NULL arg It does not return NULL when arg is NULL. Signed-off-by: Alexey Kuznetsov Signed-off-by: Kirill Korotaev Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- include/asm-ia64/pgalloc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h index 393e04c42a2..560c287b123 100644 --- a/include/asm-ia64/pgalloc.h +++ b/include/asm-ia64/pgalloc.h @@ -137,7 +137,8 @@ pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmd_entry, pte_t * pte) static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr) { - return virt_to_page(pgtable_quicklist_alloc()); + void *pg = pgtable_quicklist_alloc(); + return pg ? virt_to_page(pg) : NULL; } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, -- cgit v1.2.3 From 86afa9eb88af2248bcc91d5b3568c63fdea65d6c Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 5 Feb 2007 16:07:57 -0800 Subject: [IA64] Hook up getcpu system call for IA64 getcpu system call returns cpu# and node# on which this system call and its caller are running. This patch hooks up its implementation on IA64. Signed-off-by: Fenghua Yu Signed-off-by: Tony Luck --- include/asm-ia64/unistd.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h index 53c5c0ee122..a9e1fa4cac4 100644 --- a/include/asm-ia64/unistd.h +++ b/include/asm-ia64/unistd.h @@ -291,11 +291,13 @@ #define __NR_sync_file_range 1300 #define __NR_tee 1301 #define __NR_vmsplice 1302 +/* 1303 reserved for move_pages */ +#define __NR_getcpu 1304 #ifdef __KERNEL__ -#define NR_syscalls 279 /* length of syscall table */ +#define NR_syscalls 281 /* length of syscall table */ #define __ARCH_WANT_SYS_RT_SIGACTION -- cgit v1.2.3 From cde14bbfb3aa79b479db35bd29e6c083513d8614 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 5 Feb 2007 18:46:40 -0800 Subject: [IA64] swiotlb bug fixes This patch fixes - marking I-cache clean of pages DMAed to now only done for IA64 - broken multiple inclusion in include/asm-x86_64/swiotlb.h - missing call to mark_clean in swiotlb_sync_sg() - a (perhaps only theoretical) issue in swiotlb_dma_supported() when io_tlb_end is exactly at the end of memory Signed-off-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- include/asm-ia64/dma.h | 2 ++ include/asm-x86_64/swiotlb.h | 7 ++++--- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-ia64/dma.h b/include/asm-ia64/dma.h index dad3a735df8..4d97f60f1ef 100644 --- a/include/asm-ia64/dma.h +++ b/include/asm-ia64/dma.h @@ -19,4 +19,6 @@ extern unsigned long MAX_DMA_ADDRESS; #define free_dma(x) +void dma_mark_clean(void *addr, size_t size); + #endif /* _ASM_IA64_DMA_H */ diff --git a/include/asm-x86_64/swiotlb.h b/include/asm-x86_64/swiotlb.h index ba94ab3d267..f9c589539a8 100644 --- a/include/asm-x86_64/swiotlb.h +++ b/include/asm-x86_64/swiotlb.h @@ -1,6 +1,5 @@ #ifndef _ASM_SWIOTLB_H -#define _ASM_SWTIOLB_H 1 - +#define _ASM_SWIOTLB_H 1 #include @@ -52,4 +51,6 @@ extern int swiotlb; extern void pci_swiotlb_init(void); -#endif /* _ASM_SWTIOLB_H */ +static inline void dma_mark_clean(void *addr, size_t size) {} + +#endif /* _ASM_SWIOTLB_H */ -- cgit v1.2.3 From 51099005ab8e09d68a13fea8d55bc739c1040ca6 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 5 Feb 2007 18:53:04 -0800 Subject: [IA64] swiotlb abstraction (e.g. for Xen) Add abstraction so that the file can be used by environments other than IA64 and EM64T, namely for Xen. Signed-off-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- include/asm-ia64/swiotlb.h | 9 +++++++++ include/asm-x86_64/swiotlb.h | 1 + 2 files changed, 10 insertions(+) create mode 100644 include/asm-ia64/swiotlb.h (limited to 'include') diff --git a/include/asm-ia64/swiotlb.h b/include/asm-ia64/swiotlb.h new file mode 100644 index 00000000000..452c162dee4 --- /dev/null +++ b/include/asm-ia64/swiotlb.h @@ -0,0 +1,9 @@ +#ifndef _ASM_SWIOTLB_H +#define _ASM_SWIOTLB_H 1 + +#include + +#define SWIOTLB_ARCH_NEED_LATE_INIT +#define SWIOTLB_ARCH_NEED_ALLOC + +#endif /* _ASM_SWIOTLB_H */ diff --git a/include/asm-x86_64/swiotlb.h b/include/asm-x86_64/swiotlb.h index f9c589539a8..ab913ffcad5 100644 --- a/include/asm-x86_64/swiotlb.h +++ b/include/asm-x86_64/swiotlb.h @@ -44,6 +44,7 @@ extern void swiotlb_init(void); extern int swiotlb_force; #ifdef CONFIG_SWIOTLB +#define SWIOTLB_ARCH_NEED_ALLOC extern int swiotlb; #else #define swiotlb 0 -- cgit v1.2.3 From 97dcb82de6cc99a5669eb8e342efc24cceb1e77e Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 8 Jan 2007 02:14:29 +0900 Subject: [MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/ddb5xxx/ddb5477.h | 5 +++-- include/asm-mips/dec/interrupts.h | 3 ++- include/asm-mips/emma2rh/emma2rh.h | 5 ++++- include/asm-mips/emma2rh/markeins.h | 1 - include/asm-mips/irq_cpu.h | 6 +++--- include/asm-mips/mach-cobalt/cobalt.h | 4 +++- include/asm-mips/mach-emma2rh/irq.h | 2 ++ include/asm-mips/mach-generic/irq.h | 26 ++++++++++++++++++++++++++ include/asm-mips/mach-mips/irq.h | 2 ++ include/asm-mips/mach-vr41xx/irq.h | 8 ++++++++ include/asm-mips/mips-boards/atlasint.h | 4 +++- include/asm-mips/mips-boards/maltaint.h | 4 +++- include/asm-mips/mips-boards/seadint.h | 4 +++- include/asm-mips/mips-boards/simint.h | 3 ++- include/asm-mips/rtlx.h | 3 ++- include/asm-mips/sgi/ip22.h | 13 +++++++------ 16 files changed, 73 insertions(+), 20 deletions(-) create mode 100644 include/asm-mips/mach-vr41xx/irq.h (limited to 'include') diff --git a/include/asm-mips/ddb5xxx/ddb5477.h b/include/asm-mips/ddb5xxx/ddb5477.h index c5af4b73fdd..27655dbd23f 100644 --- a/include/asm-mips/ddb5xxx/ddb5477.h +++ b/include/asm-mips/ddb5xxx/ddb5477.h @@ -17,6 +17,7 @@ #ifndef __ASM_DDB5XXX_DDB5477_H #define __ASM_DDB5XXX_DDB5477_H +#include /* * This contains macros that are specific to DDB5477 or renamed from @@ -257,8 +258,8 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq); #define DDB_IRQ_BASE 0 #define I8259_IRQ_BASE DDB_IRQ_BASE -#define VRC5477_IRQ_BASE (I8259_IRQ_BASE + NUM_I8259_IRQ) -#define CPU_IRQ_BASE (VRC5477_IRQ_BASE + NUM_VRC5477_IRQ) +#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE +#define VRC5477_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ) /* * vrc5477 irq defs diff --git a/include/asm-mips/dec/interrupts.h b/include/asm-mips/dec/interrupts.h index 273e4d65bfe..e10d341067c 100644 --- a/include/asm-mips/dec/interrupts.h +++ b/include/asm-mips/dec/interrupts.h @@ -14,6 +14,7 @@ #ifndef __ASM_DEC_INTERRUPTS_H #define __ASM_DEC_INTERRUPTS_H +#include #include @@ -87,7 +88,7 @@ #define DEC_CPU_INR_SW1 1 /* software #1 */ #define DEC_CPU_INR_SW0 0 /* software #0 */ -#define DEC_CPU_IRQ_BASE 0 /* first IRQ assigned to CPU */ +#define DEC_CPU_IRQ_BASE MIPS_CPU_IRQ_BASE /* first IRQ assigned to CPU */ #define DEC_CPU_IRQ_NR(n) ((n) + DEC_CPU_IRQ_BASE) #define DEC_CPU_IRQ_MASK(n) (1 << ((n) + CAUSEB_IP)) diff --git a/include/asm-mips/emma2rh/emma2rh.h b/include/asm-mips/emma2rh/emma2rh.h index 4fb8df71caa..6a1af0af51e 100644 --- a/include/asm-mips/emma2rh/emma2rh.h +++ b/include/asm-mips/emma2rh/emma2rh.h @@ -24,6 +24,8 @@ #ifndef __ASM_EMMA2RH_EMMA2RH_H #define __ASM_EMMA2RH_EMMA2RH_H +#include + /* * EMMA2RH registers */ @@ -104,7 +106,8 @@ #define NUM_EMMA2RH_IRQ 96 #define CPU_EMMA2RH_CASCADE 2 -#define EMMA2RH_IRQ_BASE 0 +#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE +#define EMMA2RH_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ) /* * emma2rh irq defs diff --git a/include/asm-mips/emma2rh/markeins.h b/include/asm-mips/emma2rh/markeins.h index 8fa76679507..973b0628490 100644 --- a/include/asm-mips/emma2rh/markeins.h +++ b/include/asm-mips/emma2rh/markeins.h @@ -33,7 +33,6 @@ #define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ) #define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW) -#define CPU_IRQ_BASE (EMMA2RH_GPIO_IRQ_BASE + NUM_EMMA2RH_IRQ_GPIO) #define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE) #define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE) diff --git a/include/asm-mips/irq_cpu.h b/include/asm-mips/irq_cpu.h index ed3d1e3d09e..ef6a07cddb2 100644 --- a/include/asm-mips/irq_cpu.h +++ b/include/asm-mips/irq_cpu.h @@ -13,8 +13,8 @@ #ifndef _ASM_IRQ_CPU_H #define _ASM_IRQ_CPU_H -extern void mips_cpu_irq_init(int irq_base); -extern void rm7k_cpu_irq_init(int irq_base); -extern void rm9k_cpu_irq_init(int irq_base); +extern void mips_cpu_irq_init(void); +extern void rm7k_cpu_irq_init(void); +extern void rm9k_cpu_irq_init(void); #endif /* _ASM_IRQ_CPU_H */ diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h index 00b0fc68d5c..24a8d51a55a 100644 --- a/include/asm-mips/mach-cobalt/cobalt.h +++ b/include/asm-mips/mach-cobalt/cobalt.h @@ -12,6 +12,8 @@ #ifndef __ASM_COBALT_H #define __ASM_COBALT_H +#include + /* * i8259 legacy interrupts used on Cobalt: * @@ -25,7 +27,7 @@ /* * CPU IRQs are 16 ... 23 */ -#define COBALT_CPU_IRQ 16 +#define COBALT_CPU_IRQ MIPS_CPU_IRQ_BASE #define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2) #define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */ diff --git a/include/asm-mips/mach-emma2rh/irq.h b/include/asm-mips/mach-emma2rh/irq.h index bce64244b80..5439eb85646 100644 --- a/include/asm-mips/mach-emma2rh/irq.h +++ b/include/asm-mips/mach-emma2rh/irq.h @@ -10,4 +10,6 @@ #define NR_IRQS 256 +#include_next + #endif /* __ASM_MACH_EMMA2RH_IRQ_H */ diff --git a/include/asm-mips/mach-generic/irq.h b/include/asm-mips/mach-generic/irq.h index 500e10ff24d..91e6778907f 100644 --- a/include/asm-mips/mach-generic/irq.h +++ b/include/asm-mips/mach-generic/irq.h @@ -8,6 +8,32 @@ #ifndef __ASM_MACH_GENERIC_IRQ_H #define __ASM_MACH_GENERIC_IRQ_H +#ifndef NR_IRQS #define NR_IRQS 128 +#endif + +#ifdef CONFIG_IRQ_CPU + +#ifndef MIPS_CPU_IRQ_BASE +#ifdef CONFIG_I8259 +#define MIPS_CPU_IRQ_BASE 16 +#else +#define MIPS_CPU_IRQ_BASE 0 +#endif /* CONFIG_I8259 */ +#endif + +#ifdef CONFIG_IRQ_CPU_RM7K +#ifndef RM7K_CPU_IRQ_BASE +#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8) +#endif +#endif + +#ifdef CONFIG_IRQ_CPU_RM9K +#ifndef RM9K_CPU_IRQ_BASE +#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12) +#endif +#endif + +#endif /* CONFIG_IRQ_CPU */ #endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/include/asm-mips/mach-mips/irq.h b/include/asm-mips/mach-mips/irq.h index e994b0c0122..9b9da26683c 100644 --- a/include/asm-mips/mach-mips/irq.h +++ b/include/asm-mips/mach-mips/irq.h @@ -4,4 +4,6 @@ #define NR_IRQS 256 +#include_next + #endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/include/asm-mips/mach-vr41xx/irq.h b/include/asm-mips/mach-vr41xx/irq.h new file mode 100644 index 00000000000..862058d3f81 --- /dev/null +++ b/include/asm-mips/mach-vr41xx/irq.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_VR41XX_IRQ_H +#define __ASM_MACH_VR41XX_IRQ_H + +#include /* for MIPS_CPU_IRQ_BASE */ + +#include_next + +#endif /* __ASM_MACH_VR41XX_IRQ_H */ diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h index b15e4ea0b09..76add42e486 100644 --- a/include/asm-mips/mips-boards/atlasint.h +++ b/include/asm-mips/mips-boards/atlasint.h @@ -26,10 +26,12 @@ #ifndef _MIPS_ATLASINT_H #define _MIPS_ATLASINT_H +#include + /* * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode) */ -#define MIPSCPU_INT_BASE 0 +#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE /* CPU interrupt offsets */ #define MIPSCPU_INT_SW0 0 diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h index da6cc2fbbc7..9180d646611 100644 --- a/include/asm-mips/mips-boards/maltaint.h +++ b/include/asm-mips/mips-boards/maltaint.h @@ -25,6 +25,8 @@ #ifndef _MIPS_MALTAINT_H #define _MIPS_MALTAINT_H +#include + /* * Interrupts 0..15 are used for Malta ISA compatible interrupts */ @@ -33,7 +35,7 @@ /* * Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode) */ -#define MIPSCPU_INT_BASE 16 +#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE /* CPU interrupt offsets */ #define MIPSCPU_INT_SW0 0 diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h index 365c2a3c64f..4f6a3933699 100644 --- a/include/asm-mips/mips-boards/seadint.h +++ b/include/asm-mips/mips-boards/seadint.h @@ -20,10 +20,12 @@ #ifndef _MIPS_SEADINT_H #define _MIPS_SEADINT_H +#include + /* * Interrupts 0..7 are used for SEAD CPU interrupts */ -#define MIPSCPU_INT_BASE 0 +#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE #define MIPSCPU_INT_UART0 2 #define MIPSCPU_INT_UART1 3 diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h index 4952e0b3bf1..54f2fe621d6 100644 --- a/include/asm-mips/mips-boards/simint.h +++ b/include/asm-mips/mips-boards/simint.h @@ -17,10 +17,11 @@ #ifndef _MIPS_SIMINT_H #define _MIPS_SIMINT_H +#include #define SIM_INT_BASE 0 #define MIPSCPU_INT_MB0 2 -#define MIPSCPU_INT_BASE 16 +#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE #define MIPS_CPU_TIMER_IRQ 7 diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h index 76cd51c6be3..59162f74a79 100644 --- a/include/asm-mips/rtlx.h +++ b/include/asm-mips/rtlx.h @@ -6,9 +6,10 @@ #ifndef __ASM_RTLX_H #define __ASM_RTLX_H_ +#include + #define LX_NODE_BASE 10 -#define MIPSCPU_INT_BASE 16 #define MIPS_CPU_RTLX_IRQ 0 #define RTLX_VERSION 2 diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h index bbfc05c3cab..6592f3bd199 100644 --- a/include/asm-mips/sgi/ip22.h +++ b/include/asm-mips/sgi/ip22.h @@ -21,15 +21,16 @@ * HAL2 driver). This will prevent many complications, trust me ;-) */ +#include #include #define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */ -#define SGINT_CPU 16 /* MIPS CPU define 8 interrupt sources */ -#define SGINT_LOCAL0 24 /* 8 local0 irq levels */ -#define SGINT_LOCAL1 32 /* 8 local1 irq levels */ -#define SGINT_LOCAL2 40 /* 8 local2 vectored irq levels */ -#define SGINT_LOCAL3 48 /* 8 local3 vectored irq levels */ -#define SGINT_END 56 /* End of 'spaces' */ +#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */ +#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */ +#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */ +#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */ +#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */ +#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */ /* * Individual interrupt definitions for the Indy and Indigo2 -- cgit v1.2.3 From 2fa7937bd8922e1fe4aae6a45e7e787fa45d6043 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 14 Jan 2007 23:41:42 +0900 Subject: [MIPS] Make I8259A_IRQ_BASE customizable Move I8259A_IRQ_BASE from asm/i8259.h to asm/mach-generic/irq.h and make it really customizable. And remove I8259_IRQ_BASE declared on some platforms. Currently only NEC_CMBVR4133 is using custom I8259A_IRQ_BASE value. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/ddb5xxx/ddb5477.h | 36 ++++++++++++++++-------------------- include/asm-mips/i8259.h | 3 +-- include/asm-mips/irq.h | 2 +- include/asm-mips/mach-generic/irq.h | 6 ++++++ include/asm-mips/mach-vr41xx/irq.h | 3 +++ include/asm-mips/vr41xx/cmbvr4133.h | 5 ++--- 6 files changed, 29 insertions(+), 26 deletions(-) (limited to 'include') diff --git a/include/asm-mips/ddb5xxx/ddb5477.h b/include/asm-mips/ddb5xxx/ddb5477.h index 27655dbd23f..6cf177caf6d 100644 --- a/include/asm-mips/ddb5xxx/ddb5477.h +++ b/include/asm-mips/ddb5xxx/ddb5477.h @@ -252,12 +252,8 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq); */ #define NUM_CPU_IRQ 8 -#define NUM_I8259_IRQ 16 #define NUM_VRC5477_IRQ 32 -#define DDB_IRQ_BASE 0 - -#define I8259_IRQ_BASE DDB_IRQ_BASE #define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE #define VRC5477_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ) @@ -301,22 +297,22 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq); /* * i2859 irq assignment */ -#define I8259_IRQ_RESERVED_0 (0 + I8259_IRQ_BASE) -#define I8259_IRQ_KEYBOARD (1 + I8259_IRQ_BASE) /* M1543 default */ -#define I8259_IRQ_CASCADE (2 + I8259_IRQ_BASE) -#define I8259_IRQ_UART_B (3 + I8259_IRQ_BASE) /* M1543 default, may conflict with RTC according to schematic diagram */ -#define I8259_IRQ_UART_A (4 + I8259_IRQ_BASE) /* M1543 default */ -#define I8259_IRQ_PARALLEL (5 + I8259_IRQ_BASE) /* M1543 default */ -#define I8259_IRQ_RESERVED_6 (6 + I8259_IRQ_BASE) -#define I8259_IRQ_RESERVED_7 (7 + I8259_IRQ_BASE) -#define I8259_IRQ_RTC (8 + I8259_IRQ_BASE) /* who set this? */ -#define I8259_IRQ_USB (9 + I8259_IRQ_BASE) /* ddb_setup */ -#define I8259_IRQ_PMU (10 + I8259_IRQ_BASE) /* ddb_setup */ -#define I8259_IRQ_RESERVED_11 (11 + I8259_IRQ_BASE) -#define I8259_IRQ_RESERVED_12 (12 + I8259_IRQ_BASE) /* m1543_irq_setup */ -#define I8259_IRQ_RESERVED_13 (13 + I8259_IRQ_BASE) -#define I8259_IRQ_HDC1 (14 + I8259_IRQ_BASE) /* default and ddb_setup */ -#define I8259_IRQ_HDC2 (15 + I8259_IRQ_BASE) /* default */ +#define I8259_IRQ_RESERVED_0 (0 + I8259A_IRQ_BASE) +#define I8259_IRQ_KEYBOARD (1 + I8259A_IRQ_BASE) /* M1543 default */ +#define I8259_IRQ_CASCADE (2 + I8259A_IRQ_BASE) +#define I8259_IRQ_UART_B (3 + I8259A_IRQ_BASE) /* M1543 default, may conflict with RTC according to schematic diagram */ +#define I8259_IRQ_UART_A (4 + I8259A_IRQ_BASE) /* M1543 default */ +#define I8259_IRQ_PARALLEL (5 + I8259A_IRQ_BASE) /* M1543 default */ +#define I8259_IRQ_RESERVED_6 (6 + I8259A_IRQ_BASE) +#define I8259_IRQ_RESERVED_7 (7 + I8259A_IRQ_BASE) +#define I8259_IRQ_RTC (8 + I8259A_IRQ_BASE) /* who set this? */ +#define I8259_IRQ_USB (9 + I8259A_IRQ_BASE) /* ddb_setup */ +#define I8259_IRQ_PMU (10 + I8259A_IRQ_BASE) /* ddb_setup */ +#define I8259_IRQ_RESERVED_11 (11 + I8259A_IRQ_BASE) +#define I8259_IRQ_RESERVED_12 (12 + I8259A_IRQ_BASE) /* m1543_irq_setup */ +#define I8259_IRQ_RESERVED_13 (13 + I8259A_IRQ_BASE) +#define I8259_IRQ_HDC1 (14 + I8259A_IRQ_BASE) /* default and ddb_setup */ +#define I8259_IRQ_HDC2 (15 + I8259A_IRQ_BASE) /* default */ /* diff --git a/include/asm-mips/i8259.h b/include/asm-mips/i8259.h index 4df8d8b118c..e88a01607fe 100644 --- a/include/asm-mips/i8259.h +++ b/include/asm-mips/i8259.h @@ -18,6 +18,7 @@ #include #include +#include /* i8259A PIC registers */ #define PIC_MASTER_CMD 0x20 @@ -42,8 +43,6 @@ extern void disable_8259A_irq(unsigned int irq); extern void init_i8259_irqs(void); -#define I8259A_IRQ_BASE 0 - /* * Do the traditional i8259 interrupt polling thing. This is for the few * cases where no better interrupt acknowledge method is available and we diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h index 386da82e577..91803ba30ff 100644 --- a/include/asm-mips/irq.h +++ b/include/asm-mips/irq.h @@ -18,7 +18,7 @@ #ifdef CONFIG_I8259 static inline int irq_canonicalize(int irq) { - return ((irq == 2) ? 9 : irq); + return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq); } #else #define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ diff --git a/include/asm-mips/mach-generic/irq.h b/include/asm-mips/mach-generic/irq.h index 91e6778907f..70d9a25132c 100644 --- a/include/asm-mips/mach-generic/irq.h +++ b/include/asm-mips/mach-generic/irq.h @@ -12,6 +12,12 @@ #define NR_IRQS 128 #endif +#ifdef CONFIG_I8259 +#ifndef I8259A_IRQ_BASE +#define I8259A_IRQ_BASE 0 +#endif +#endif + #ifdef CONFIG_IRQ_CPU #ifndef MIPS_CPU_IRQ_BASE diff --git a/include/asm-mips/mach-vr41xx/irq.h b/include/asm-mips/mach-vr41xx/irq.h index 862058d3f81..84881229605 100644 --- a/include/asm-mips/mach-vr41xx/irq.h +++ b/include/asm-mips/mach-vr41xx/irq.h @@ -2,6 +2,9 @@ #define __ASM_MACH_VR41XX_IRQ_H #include /* for MIPS_CPU_IRQ_BASE */ +#ifdef CONFIG_NEC_CMBVR4133 +#include /* for I8259A_IRQ_BASE */ +#endif #include_next diff --git a/include/asm-mips/vr41xx/cmbvr4133.h b/include/asm-mips/vr41xx/cmbvr4133.h index 9490ade58b4..42300037d59 100644 --- a/include/asm-mips/vr41xx/cmbvr4133.h +++ b/include/asm-mips/vr41xx/cmbvr4133.h @@ -35,8 +35,8 @@ #define CMBVR41XX_INTD_IRQ GIU_IRQ(CMBVR41XX_INTD_PIN) #define CMBVR41XX_INTE_IRQ GIU_IRQ(CMBVR41XX_INTE_PIN) -#define I8259_IRQ_BASE 72 -#define I8259_IRQ(x) (I8259_IRQ_BASE + (x)) +#define I8259A_IRQ_BASE 72 +#define I8259_IRQ(x) (I8259A_IRQ_BASE + (x)) #define TIMER_IRQ I8259_IRQ(0) #define KEYBOARD_IRQ I8259_IRQ(1) #define I8259_SLAVE_IRQ I8259_IRQ(2) @@ -52,6 +52,5 @@ #define AUX_IRQ I8259_IRQ(12) #define IDE_PRIMARY_IRQ I8259_IRQ(14) #define IDE_SECONDARY_IRQ I8259_IRQ(15) -#define I8259_IRQ_LAST IDE_SECONDARY_IRQ #endif /* __NEC_CMBVR4133_H */ -- cgit v1.2.3 From c44e8d5e47b8ba672440b92eab0735628469116c Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 30 Dec 2006 00:43:59 +0900 Subject: [MIPS] prom_free_prom_memory cleanup Current prom_free_prom_memory() implementations are almost same as free_init_pages(), or no-op. Make free_init_pages() extern (again) and make prom_free_prom_memory() use it. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/bootinfo.h | 4 ++++ include/asm-mips/mips-boards/prom.h | 1 - 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index 8e321f53a38..c7c945baf1e 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -243,6 +243,10 @@ extern struct boot_mem_map boot_mem_map; extern void add_memory_region(phys_t start, phys_t size, long type); extern void prom_init(void); +extern void prom_free_prom_memory(void); + +extern void free_init_pages(const char *what, + unsigned long begin, unsigned long end); /* * Initial kernel command line, usually setup by prom_init() diff --git a/include/asm-mips/mips-boards/prom.h b/include/asm-mips/mips-boards/prom.h index 4168c7fcd43..7bf6f5f6ab9 100644 --- a/include/asm-mips/mips-boards/prom.h +++ b/include/asm-mips/mips-boards/prom.h @@ -33,7 +33,6 @@ extern void prom_printf(char *fmt, ...); extern void prom_init_cmdline(void); extern void prom_meminit(void); extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); -extern unsigned long prom_free_prom_memory (void); extern void mips_display_message(const char *str); extern void mips_display_word(unsigned int num); extern int get_ethernet_addr(char *ethernet_addr); -- cgit v1.2.3 From db84dc61552ae0d198a8133d28b80c3838930ba8 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Wed, 10 Jan 2007 09:44:04 +0100 Subject: [MIPS] Setup min_low_pfn/max_low_pfn correctly This patch makes a better usage of these two globals. 'min_low_pfn' is now correctly setup for all configs, which allow us to rely on it in boot memory code init. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- include/asm-mips/dma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-mips/dma.h b/include/asm-mips/dma.h index 23f789c8084..e06ef0776d4 100644 --- a/include/asm-mips/dma.h +++ b/include/asm-mips/dma.h @@ -91,6 +91,7 @@ #else #define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000) #endif +#define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS)) /* 8237 DMA controllers */ #define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -- cgit v1.2.3 From 6f284a2ce7b8bc49cb8455b1763357897a899abb Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Wed, 10 Jan 2007 09:44:05 +0100 Subject: [MIPS] FLATMEM: introduce PHYS_OFFSET. The old code was assuming that min_low_pfn was always 0. This means that platforms having a big hole at their memory start paid the price of wasting some memory for the allocation of unused entries in mem_map[]. This patch prevents this waste. It introduces PHYS_OFFSET define which is the start of the physical memory and uses it wherever needed. Specially when converting physical/virtual addresses into virtual/physical ones. Currently all platforms defines PHYS_OFFSET to 0. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- include/asm-mips/io.h | 4 ++-- include/asm-mips/page.h | 25 +++++++++++++++++++++---- 2 files changed, 23 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index d77b657c09c..67f08107890 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -115,7 +115,7 @@ static inline void set_io_port_base(unsigned long base) */ static inline unsigned long virt_to_phys(volatile const void *address) { - return (unsigned long)address - PAGE_OFFSET; + return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET; } /* @@ -132,7 +132,7 @@ static inline unsigned long virt_to_phys(volatile const void *address) */ static inline void * phys_to_virt(unsigned long address) { - return (void *)(address + PAGE_OFFSET); + return (void *)(address + PAGE_OFFSET - PHYS_OFFSET); } /* diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index 2f9e1a9ec51..d3fbd83ff54 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -34,6 +34,20 @@ #ifndef __ASSEMBLY__ +/* + * This gives the physical RAM offset. + */ +#ifndef PHYS_OFFSET +#define PHYS_OFFSET 0UL +#endif + +/* + * It's normally defined only for FLATMEM config but it's + * used in our early mem init code for all memory models. + * So always define it. + */ +#define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET) + #include #include @@ -132,20 +146,23 @@ typedef struct { unsigned long pgprot; } pgprot_t; /* to align the pointer to the (next) page boundary */ #define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) +/* + * __pa()/__va() should be used only during mem init. + */ #if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) #define __pa_page_offset(x) ((unsigned long)(x) < CKSEG0 ? PAGE_OFFSET : CKSEG0) #else #define __pa_page_offset(x) PAGE_OFFSET #endif -#define __pa(x) ((unsigned long)(x) - __pa_page_offset(x)) -#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x),0)) -#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET)) +#define __pa(x) ((unsigned long)(x) - __pa_page_offset(x) + PHYS_OFFSET) +#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) +#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x),0)) #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) #ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) ((pfn) < max_mapnr) +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) #elif defined(CONFIG_SPARSEMEM) -- cgit v1.2.3 From 907e193ea798b3f73a71a2a01f938b69fd53b26d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 23 Jan 2007 22:29:06 +0900 Subject: [MIPS] Remove _fdata from asm-mips/sections.h There is no _fdata symbol in kernel. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/sections.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-mips/sections.h b/include/asm-mips/sections.h index f7016278b26..b7e37262c24 100644 --- a/include/asm-mips/sections.h +++ b/include/asm-mips/sections.h @@ -3,6 +3,4 @@ #include -extern char _fdata; - #endif /* _ASM_SECTIONS_H */ -- cgit v1.2.3 From 786d7cdd06581773ee7913560838d6f4487d2d9f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 7 Nov 2006 09:58:30 +0000 Subject: [MIPS] Alchemy: Fix bunch of warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC arch/mips/au1000/common/pci.o arch/mips/au1000/common/pci.c:42: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:43: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:49: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:50: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c: In function ‘au1x_pci_setup’: arch/mips/au1000/common/pci.c:82: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Ralf Baechle --- include/asm-mips/mach-au1x00/au1000.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 582acd8adb8..43beeaa77b1 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -39,6 +39,7 @@ #ifndef _LANGUAGE_ASSEMBLY #include +#include #include /* cpu pipeline flush */ @@ -1664,12 +1665,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; * addresses. For PCI IO, it's simpler because we get to do the ioremap * ourselves and then adjust the device's resources. */ -#define Au1500_EXT_CFG 0x600000000ULL -#define Au1500_EXT_CFG_TYPE1 0x680000000ULL -#define Au1500_PCI_IO_START 0x500000000ULL -#define Au1500_PCI_IO_END 0x5000FFFFFULL -#define Au1500_PCI_MEM_START 0x440000000ULL -#define Au1500_PCI_MEM_END 0x44FFFFFFFULL +#define Au1500_EXT_CFG ((resource_size_t) 0x600000000ULL) +#define Au1500_EXT_CFG_TYPE1 ((resource_size_t) 0x680000000ULL) +#define Au1500_PCI_IO_START ((resource_size_t) 0x500000000ULL) +#define Au1500_PCI_IO_END ((resource_size_t) 0x5000FFFFFULL) +#define Au1500_PCI_MEM_START ((resource_size_t) 0x440000000ULL) +#define Au1500_PCI_MEM_END ((resource_size_t) 0x44FFFFFFFULL) #define PCI_IO_START (Au1500_PCI_IO_START + 0x1000) #define PCI_IO_END (Au1500_PCI_IO_END) -- cgit v1.2.3 From 5868756dcbf4b585c3c485e43fc36844c038cef5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 5 Feb 2007 00:33:21 +0000 Subject: [MIPS] SMTC: Make a bunch of functions and variables static. Signed-off-by: Ralf Baechle --- include/asm-mips/smtc_ipi.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/asm-mips/smtc_ipi.h b/include/asm-mips/smtc_ipi.h index f22c3e2f993..55f3419f654 100644 --- a/include/asm-mips/smtc_ipi.h +++ b/include/asm-mips/smtc_ipi.h @@ -44,9 +44,6 @@ struct smtc_ipi_q { int depth; }; -extern struct smtc_ipi_q IPIQ[NR_CPUS]; -extern struct smtc_ipi_q freeIPIq; - static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p) { long flags; -- cgit v1.2.3 From fd046eb5378f2bc59851fcbc91957d01529fc3db Mon Sep 17 00:00:00 2001 From: Alexander Bigga Date: Thu, 21 Dec 2006 11:25:19 +0100 Subject: [MIPS] Alchemy: Fix PCI-memory access The problem was introduced in 2.6.18.3 with the casting of some 36bit-defines (PCI memory) in au1000.h to resource_size_t which may be u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT. With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed because the ioremap in arch/mips/au1000/common/pci.c already used the truncated addresses. With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c fails because the maximum iomem-address is 0xffffffff (32bit) but the pci-memory-start-address is 0x440000000 (36bit). To get pci working again, I propose the following patch: 1. remove the resource_size_t-casting from au1000.h again 2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and necessary here. The 36bit-handling will be done in __fixup_bigphys_addr). With this patch pci works again like in 2.6.18.2, the gcc-compile warnings in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL. Signed-off-by: Alexander Bigga Signed-off-by: Ralf Baechle --- include/asm-mips/mach-au1x00/au1000.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 43beeaa77b1..58fca8a5a9a 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -1665,12 +1665,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; * addresses. For PCI IO, it's simpler because we get to do the ioremap * ourselves and then adjust the device's resources. */ -#define Au1500_EXT_CFG ((resource_size_t) 0x600000000ULL) -#define Au1500_EXT_CFG_TYPE1 ((resource_size_t) 0x680000000ULL) -#define Au1500_PCI_IO_START ((resource_size_t) 0x500000000ULL) -#define Au1500_PCI_IO_END ((resource_size_t) 0x5000FFFFFULL) -#define Au1500_PCI_MEM_START ((resource_size_t) 0x440000000ULL) -#define Au1500_PCI_MEM_END ((resource_size_t) 0x44FFFFFFFULL) +#define Au1500_EXT_CFG 0x600000000ULL +#define Au1500_EXT_CFG_TYPE1 0x680000000ULL +#define Au1500_PCI_IO_START 0x500000000ULL +#define Au1500_PCI_IO_END 0x5000FFFFFULL +#define Au1500_PCI_MEM_START 0x440000000ULL +#define Au1500_PCI_MEM_END 0x44FFFFFFFULL #define PCI_IO_START (Au1500_PCI_IO_START + 0x1000) #define PCI_IO_END (Au1500_PCI_IO_END) -- cgit v1.2.3 From be701306eba49c9157506d4bbe40dbed7969a915 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 4 Feb 2007 23:23:00 +0000 Subject: [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype. Signed-off-by: Ralf Baechle --- include/asm-mips/mipsmtregs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h index 3e9468f424f..294bca12cd3 100644 --- a/include/asm-mips/mipsmtregs.h +++ b/include/asm-mips/mipsmtregs.h @@ -165,8 +165,6 @@ #ifndef __ASSEMBLY__ -extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value); - static inline unsigned int dvpe(void) { int res = 0; -- cgit v1.2.3 From 131c1a2b6eef87485f7e280817d97615ea2a1551 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Thu, 1 Feb 2007 19:54:13 +0000 Subject: [MIPS] Comment fix Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- include/asm-mips/uaccess.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index 1cdd4eeb2f7..c12ebc53ef3 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -488,7 +488,8 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); }) /* - * __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space. + * __copy_from_user: - Copy a block of data from user space, with less checking. + * @to: Destination address, in kernel space. * @from: Source address, in user space. * @n: Number of bytes to copy. * -- cgit v1.2.3 From f1ddcaf3393b7a3871809b97fae90fac841a1f39 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 27 Jan 2007 10:05:15 +1100 Subject: [CRYPTO] api: Remove deprecated interface This patch removes the old cipher interface and related code. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 127 ------------------------------------------------- 1 file changed, 127 deletions(-) (limited to 'include') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 4aa9046601d..95936a5e7c1 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -51,15 +51,9 @@ /* * Transform masks and values (for crt_flags). */ -#define CRYPTO_TFM_MODE_MASK 0x000000ff #define CRYPTO_TFM_REQ_MASK 0x000fff00 #define CRYPTO_TFM_RES_MASK 0xfff00000 -#define CRYPTO_TFM_MODE_ECB 0x00000001 -#define CRYPTO_TFM_MODE_CBC 0x00000002 -#define CRYPTO_TFM_MODE_CFB 0x00000004 -#define CRYPTO_TFM_MODE_CTR 0x00000008 - #define CRYPTO_TFM_REQ_WEAK_KEY 0x00000100 #define CRYPTO_TFM_REQ_MAY_SLEEP 0x00000200 #define CRYPTO_TFM_RES_WEAK_KEY 0x00100000 @@ -71,12 +65,8 @@ /* * Miscellaneous stuff. */ -#define CRYPTO_UNSPEC 0 #define CRYPTO_MAX_ALG_NAME 64 -#define CRYPTO_DIR_ENCRYPT 1 -#define CRYPTO_DIR_DECRYPT 0 - /* * The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual * declaration) is used to ensure that the crypto_tfm context structure is @@ -148,19 +138,6 @@ struct cipher_alg { unsigned int keylen); void (*cia_encrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src); void (*cia_decrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src); - - unsigned int (*cia_encrypt_ecb)(const struct cipher_desc *desc, - u8 *dst, const u8 *src, - unsigned int nbytes) __deprecated; - unsigned int (*cia_decrypt_ecb)(const struct cipher_desc *desc, - u8 *dst, const u8 *src, - unsigned int nbytes) __deprecated; - unsigned int (*cia_encrypt_cbc)(const struct cipher_desc *desc, - u8 *dst, const u8 *src, - unsigned int nbytes) __deprecated; - unsigned int (*cia_decrypt_cbc)(const struct cipher_desc *desc, - u8 *dst, const u8 *src, - unsigned int nbytes) __deprecated; }; struct digest_alg { @@ -243,11 +220,6 @@ int crypto_unregister_alg(struct crypto_alg *alg); #ifdef CONFIG_CRYPTO int crypto_has_alg(const char *name, u32 type, u32 mask); #else -static inline int crypto_alg_available(const char *name, u32 flags) -{ - return 0; -} - static inline int crypto_has_alg(const char *name, u32 type, u32 mask) { return 0; @@ -395,40 +367,11 @@ static inline u32 crypto_tfm_alg_type(struct crypto_tfm *tfm) return tfm->__crt_alg->cra_flags & CRYPTO_ALG_TYPE_MASK; } -static unsigned int crypto_tfm_alg_min_keysize(struct crypto_tfm *tfm) - __deprecated; -static inline unsigned int crypto_tfm_alg_min_keysize(struct crypto_tfm *tfm) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - return tfm->__crt_alg->cra_cipher.cia_min_keysize; -} - -static unsigned int crypto_tfm_alg_max_keysize(struct crypto_tfm *tfm) - __deprecated; -static inline unsigned int crypto_tfm_alg_max_keysize(struct crypto_tfm *tfm) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - return tfm->__crt_alg->cra_cipher.cia_max_keysize; -} - -static unsigned int crypto_tfm_alg_ivsize(struct crypto_tfm *tfm) __deprecated; -static inline unsigned int crypto_tfm_alg_ivsize(struct crypto_tfm *tfm) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - return tfm->crt_cipher.cit_ivsize; -} - static inline unsigned int crypto_tfm_alg_blocksize(struct crypto_tfm *tfm) { return tfm->__crt_alg->cra_blocksize; } -static inline unsigned int crypto_tfm_alg_digestsize(struct crypto_tfm *tfm) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST); - return tfm->__crt_alg->cra_digest.dia_digestsize; -} - static inline unsigned int crypto_tfm_alg_alignmask(struct crypto_tfm *tfm) { return tfm->__crt_alg->cra_alignmask; @@ -809,76 +752,6 @@ static inline int crypto_hash_setkey(struct crypto_hash *hash, return crypto_hash_crt(hash)->setkey(hash, key, keylen); } -static int crypto_cipher_encrypt(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes) __deprecated; -static inline int crypto_cipher_encrypt(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - return tfm->crt_cipher.cit_encrypt(tfm, dst, src, nbytes); -} - -static int crypto_cipher_encrypt_iv(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes, u8 *iv) __deprecated; -static inline int crypto_cipher_encrypt_iv(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes, u8 *iv) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - return tfm->crt_cipher.cit_encrypt_iv(tfm, dst, src, nbytes, iv); -} - -static int crypto_cipher_decrypt(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes) __deprecated; -static inline int crypto_cipher_decrypt(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - return tfm->crt_cipher.cit_decrypt(tfm, dst, src, nbytes); -} - -static int crypto_cipher_decrypt_iv(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes, u8 *iv) __deprecated; -static inline int crypto_cipher_decrypt_iv(struct crypto_tfm *tfm, - struct scatterlist *dst, - struct scatterlist *src, - unsigned int nbytes, u8 *iv) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - return tfm->crt_cipher.cit_decrypt_iv(tfm, dst, src, nbytes, iv); -} - -static void crypto_cipher_set_iv(struct crypto_tfm *tfm, - const u8 *src, unsigned int len) __deprecated; -static inline void crypto_cipher_set_iv(struct crypto_tfm *tfm, - const u8 *src, unsigned int len) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - memcpy(tfm->crt_cipher.cit_iv, src, len); -} - -static void crypto_cipher_get_iv(struct crypto_tfm *tfm, - u8 *dst, unsigned int len) __deprecated; -static inline void crypto_cipher_get_iv(struct crypto_tfm *tfm, - u8 *dst, unsigned int len) -{ - BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - memcpy(dst, tfm->crt_cipher.cit_iv, len); -} - static inline struct crypto_comp *__crypto_comp_cast(struct crypto_tfm *tfm) { return (struct crypto_comp *)tfm; -- cgit v1.2.3 From 2e306ee016fd4750289e65c3b1856db569f1f3f2 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 17 Dec 2006 10:05:58 +1100 Subject: [CRYPTO] api: Add type-safe spawns This patch allows spawns of specific types (e.g., cipher) to be allocated. Signed-off-by: Herbert Xu --- include/crypto/algapi.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 5748aecdb41..99c534d573d 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -93,7 +93,8 @@ struct crypto_template *crypto_lookup_template(const char *name); int crypto_init_spawn(struct crypto_spawn *spawn, struct crypto_alg *alg, struct crypto_instance *inst); void crypto_drop_spawn(struct crypto_spawn *spawn); -struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn); +struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type, + u32 mask); struct crypto_alg *crypto_get_attr_alg(void *param, unsigned int len, u32 type, u32 mask); @@ -132,11 +133,28 @@ static inline void *crypto_blkcipher_ctx_aligned(struct crypto_blkcipher *tfm) return crypto_tfm_ctx_aligned(&tfm->base); } +static inline struct crypto_cipher *crypto_spawn_cipher( + struct crypto_spawn *spawn) +{ + u32 type = CRYPTO_ALG_TYPE_CIPHER; + u32 mask = CRYPTO_ALG_TYPE_MASK; + + return __crypto_cipher_cast(crypto_spawn_tfm(spawn, type, mask)); +} + static inline struct cipher_alg *crypto_cipher_alg(struct crypto_cipher *tfm) { return &crypto_cipher_tfm(tfm)->__crt_alg->cra_cipher; } +static inline struct crypto_hash *crypto_spawn_hash(struct crypto_spawn *spawn) +{ + u32 type = CRYPTO_ALG_TYPE_HASH; + u32 mask = CRYPTO_ALG_TYPE_HASH_MASK; + + return __crypto_hash_cast(crypto_spawn_tfm(spawn, type, mask)); +} + static inline void *crypto_hash_ctx_aligned(struct crypto_hash *tfm) { return crypto_tfm_ctx_aligned(&tfm->base); -- cgit v1.2.3 From 27d2a3300755387d2fec231d37944907ff992ce8 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 24 Jan 2007 20:50:26 +1100 Subject: [CRYPTO] api: Allow multiple frontends per backend This patch adds support for multiple frontend types for each backend algorithm by passing the type and mask through to the backend type init function. Signed-off-by: Herbert Xu --- include/crypto/algapi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 99c534d573d..4e05e93ff68 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -18,8 +18,8 @@ struct module; struct seq_file; struct crypto_type { - unsigned int (*ctxsize)(struct crypto_alg *alg); - int (*init)(struct crypto_tfm *tfm); + unsigned int (*ctxsize)(struct crypto_alg *alg, u32 type, u32 mask); + int (*init)(struct crypto_tfm *tfm, u32 type, u32 mask); void (*exit)(struct crypto_tfm *tfm); void (*show)(struct seq_file *m, struct crypto_alg *alg); }; -- cgit v1.2.3 From 78a1fe4f242cbe6b4578e072b75e171b92745afa Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 24 Dec 2006 10:02:00 +1100 Subject: [CRYPTO] api: Use structs for cipher/compression Now that all cipher/compression users have switched over to the new allocation scheme, we can get rid of the compatility defines and use proper structs for them. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 95936a5e7c1..779aa78ee64 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -311,13 +311,18 @@ struct crypto_tfm { void *__crt_ctx[] CRYPTO_MINALIGN_ATTR; }; -#define crypto_cipher crypto_tfm -#define crypto_comp crypto_tfm - struct crypto_blkcipher { struct crypto_tfm base; }; +struct crypto_cipher { + struct crypto_tfm base; +}; + +struct crypto_comp { + struct crypto_tfm base; +}; + struct crypto_hash { struct crypto_tfm base; }; @@ -576,7 +581,7 @@ static inline struct crypto_cipher *crypto_alloc_cipher(const char *alg_name, static inline struct crypto_tfm *crypto_cipher_tfm(struct crypto_cipher *tfm) { - return tfm; + return &tfm->base; } static inline void crypto_free_cipher(struct crypto_cipher *tfm) @@ -776,7 +781,7 @@ static inline struct crypto_comp *crypto_alloc_comp(const char *alg_name, static inline struct crypto_tfm *crypto_comp_tfm(struct crypto_comp *tfm) { - return tfm; + return &tfm->base; } static inline void crypto_free_comp(struct crypto_comp *tfm) @@ -807,14 +812,16 @@ static inline int crypto_comp_compress(struct crypto_comp *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen) { - return crypto_comp_crt(tfm)->cot_compress(tfm, src, slen, dst, dlen); + return crypto_comp_crt(tfm)->cot_compress(crypto_comp_tfm(tfm), + src, slen, dst, dlen); } static inline int crypto_comp_decompress(struct crypto_comp *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen) { - return crypto_comp_crt(tfm)->cot_decompress(tfm, src, slen, dst, dlen); + return crypto_comp_crt(tfm)->cot_decompress(crypto_comp_tfm(tfm), + src, slen, dst, dlen); } #endif /* _LINUX_CRYPTO_H */ -- cgit v1.2.3 From 390fbd1bfaa7b561af8e4f385067c55bdf4100ba Mon Sep 17 00:00:00 2001 From: Noriaki TAKAMIYA Date: Sun, 22 Oct 2006 15:02:48 +1000 Subject: [IPSEC]: added the definition of Camellia cipher This patch adds the definitions used by pfkeyv2 interface for Camellia cipher algorithm. Signed-off-by: Noriaki TAKAMIYA Signed-off-by: Herbert Xu --- include/linux/pfkeyv2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h index 265bafab649..52ed4a56f67 100644 --- a/include/linux/pfkeyv2.h +++ b/include/linux/pfkeyv2.h @@ -297,6 +297,7 @@ struct sadb_x_sec_ctx { #define SADB_X_EALG_BLOWFISHCBC 7 #define SADB_EALG_NULL 11 #define SADB_X_EALG_AESCBC 12 +#define SADB_X_EALG_CAMELLIACBC 22 #define SADB_EALG_MAX 253 /* last EALG */ /* private allocations should use 249-255 (RFC2407) */ #define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */ -- cgit v1.2.3 From 1473ae6cab7f47dde4c14f397371b2ad94457d3a Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 23 Jan 2007 15:59:26 +1100 Subject: [POWERPC] remove unused CPU_FTRS_POWER6X CPU_FTRS_POWER6X is unused, hence remove it. Signed-off-by Michael Neuling Signed-off-by: Paul Mackerras --- include/asm-powerpc/cputable.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 7384b8086b7..80e314d2f24 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -337,12 +337,6 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR) -#define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \ - CPU_FTR_SPURR | CPU_FTR_REAL_LE | CPU_FTR_DSCR) #define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ -- cgit v1.2.3 From f2a0bd3753dad7ea4605ebd5435716b39e9f92bb Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:41:24 +0300 Subject: [POWERPC] 8xx: powerpc port of core CPM PIC This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- include/asm-powerpc/fs_pd.h | 45 ++++++++++++++++++++++++++++++++++---------- include/asm-powerpc/mpc8xx.h | 24 +++++++++++++++++++++++ include/asm-powerpc/time.h | 2 ++ include/asm-ppc/commproc.h | 1 + 4 files changed, 62 insertions(+), 10 deletions(-) create mode 100644 include/asm-powerpc/mpc8xx.h (limited to 'include') diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h index 3d0e819d37f..1e2962fc4fa 100644 --- a/include/asm-powerpc/fs_pd.h +++ b/include/asm-powerpc/fs_pd.h @@ -11,19 +11,11 @@ #ifndef FS_PD_H #define FS_PD_H -#include #include #include -static inline int uart_baudrate(void) -{ - return get_baudrate(); -} - -static inline int uart_clock(void) -{ - return ppc_proc_freq; -} +#ifdef CONFIG_CPM2 +#include #define cpm2_map(member) \ ({ \ @@ -41,5 +33,38 @@ static inline int uart_clock(void) }) #define cpm2_unmap(addr) iounmap(addr) +#endif + +#ifdef CONFIG_8xx +#include +#include + +#define immr_map(member) \ +({ \ + u32 offset = offsetof(immap_t, member); \ + void *addr = ioremap (IMAP_ADDR + offset, \ + sizeof( ((immap_t*)0)->member)); \ + addr; \ +}) + +#define immr_map_size(member, size) \ +({ \ + u32 offset = offsetof(immap_t, member); \ + void *addr = ioremap (IMAP_ADDR + offset, size); \ + addr; \ +}) + +#define immr_unmap(addr) iounmap(addr) +#endif + +static inline int uart_baudrate(void) +{ + return get_baudrate(); +} + +static inline int uart_clock(void) +{ + return ppc_proc_freq; +} #endif diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h new file mode 100644 index 00000000000..e05ba6b1b00 --- /dev/null +++ b/include/asm-powerpc/mpc8xx.h @@ -0,0 +1,24 @@ +/* This is the single file included by all MPC8xx build options. + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8xx configuration, they all include + * this one and the configuration switching is done here. + */ +#ifdef __KERNEL__ +#ifndef __CONFIG_8xx_DEFS +#define __CONFIG_8xx_DEFS + + +#ifdef CONFIG_8xx + +#ifdef CONFIG_FADS +#include +#endif + +#if defined(CONFIG_MPC885ADS) +#include +#endif + +#endif /* CONFIG_8xx */ +#endif /* __CONFIG_8xx_DEFS */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index 4cff977ad52..3fd57c048f5 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -39,6 +39,8 @@ extern void generic_calibrate_decr(void); extern void wakeup_decrementer(void); extern void snapshot_timebase(void); +extern void set_dec_cpu6(unsigned int val); + /* Some sane defaults: 125 MHz timebase, 1GHz processor */ extern unsigned long ppc_proc_freq; #define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h index 7b06b4e6bf3..4f99df1bafd 100644 --- a/include/asm-ppc/commproc.h +++ b/include/asm-ppc/commproc.h @@ -77,6 +77,7 @@ extern int cpm_dpfree(uint offset); extern uint cpm_dpalloc_fixed(uint offset, uint size, uint align); extern void cpm_dpdump(void); extern void *cpm_dpram_addr(uint offset); +extern uint cpm_dpram_phys(u8* addr); extern void cpm_setbrg(uint brg, uint rate); extern uint m8xx_cpm_hostalloc(uint size); -- cgit v1.2.3 From 29f1530f1958dc74f021186c9f31ed66a0c7b8ad Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:42:10 +0300 Subject: [POWERPC] Add mpc866ads board-specific bits to arch/powerpc This add support of the Freescale mpc86xads reference board to arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC 100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx) Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc8xx.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h index e05ba6b1b00..580371120e1 100644 --- a/include/asm-powerpc/mpc8xx.h +++ b/include/asm-powerpc/mpc8xx.h @@ -15,6 +15,10 @@ #include #endif +#if defined(CONFIG_MPC86XADS) +#include +#endif + #if defined(CONFIG_MPC885ADS) #include #endif -- cgit v1.2.3 From eebb81c13aa831a623e903bbae97a23fe9be93eb Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:07:47 -0800 Subject: [POWERPC] ps3: repository misc fixes Various fixes for the PS3 repository code: - Sync signatures of function prototypes and implementations (enum vs. unsigned int) - Correct references to `regions' as `registers': o Correct enum ps3_region_type as enum ps3_reg_type, o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*, o Correct ps3_repository_find_region() as ps3_repository_find_reg(). - Correct function name in pr_debug() call - Minor error condition improvements. Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 52a69ed0d90..b56aca28b26 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -277,10 +277,10 @@ enum ps3_interrupt_type { PS3_INTERRUPT_TYPE_OTHER = 5, }; -enum ps3_region_type { - PS3_REGION_TYPE_SB_OHCI = 3, - PS3_REGION_TYPE_SB_EHCI = 4, - PS3_REGION_TYPE_SB_GPIO = 5, +enum ps3_reg_type { + PS3_REG_TYPE_SB_OHCI = 3, + PS3_REG_TYPE_SB_EHCI = 4, + PS3_REG_TYPE_SB_GPIO = 5, }; int ps3_repository_read_dev_str(unsigned int bus_index, @@ -294,13 +294,13 @@ int ps3_repository_read_dev_intr(unsigned int bus_index, enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id); int ps3_repository_read_dev_reg_type(unsigned int bus_index, unsigned int dev_index, unsigned int reg_index, - enum ps3_region_type *reg_type); + enum ps3_reg_type *reg_type); int ps3_repository_read_dev_reg_addr(unsigned int bus_index, unsigned int dev_index, unsigned int reg_index, u64 *bus_addr, u64 *len); int ps3_repository_read_dev_reg(unsigned int bus_index, unsigned int dev_index, unsigned int reg_index, - enum ps3_region_type *reg_type, u64 *bus_addr, u64 *len); + enum ps3_reg_type *reg_type, u64 *bus_addr, u64 *len); /* repository bus enumerators */ @@ -322,8 +322,8 @@ static inline int ps3_repository_find_first_device( } int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, enum ps3_interrupt_type intr_type, unsigned int *interrupt_id); -int ps3_repository_find_region(const struct ps3_repository_device *dev, - enum ps3_region_type reg_type, u64 *bus_addr, u64 *len); +int ps3_repository_find_reg(const struct ps3_repository_device *dev, + enum ps3_reg_type reg_type, u64 *bus_addr, u64 *len); /* repository block device info */ -- cgit v1.2.3 From 6c7be7d385f4911895877e0f0697c598f600136f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Jan 2007 19:07:51 -0800 Subject: [POWERPC] ps3: repository storage support Handle storage-related repository data: - Add missing implementations of ps3_repository_read_stor_*() repository accessors. - Dump storage properties in debug mode - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to the corresponding SCSI device types) to enum ps3_dev_type Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index b56aca28b26..8fed3a041de 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -25,6 +25,7 @@ #include #include #include +#include /** * struct ps3_device_id - HV bus device identifier from the system repository @@ -255,9 +256,12 @@ enum ps3_bus_type { }; enum ps3_dev_type { + PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ PS3_DEV_TYPE_SB_GELIC = 3, PS3_DEV_TYPE_SB_USB = 4, + PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ PS3_DEV_TYPE_SB_GPIO = 6, + PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ }; int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str, @@ -327,21 +331,27 @@ int ps3_repository_find_reg(const struct ps3_repository_device *dev, /* repository block device info */ -int ps3_repository_read_dev_port(unsigned int bus_index, +int ps3_repository_read_stor_dev_port(unsigned int bus_index, unsigned int dev_index, u64 *port); -int ps3_repository_read_dev_blk_size(unsigned int bus_index, +int ps3_repository_read_stor_dev_blk_size(unsigned int bus_index, unsigned int dev_index, u64 *blk_size); -int ps3_repository_read_dev_num_blocks(unsigned int bus_index, +int ps3_repository_read_stor_dev_num_blocks(unsigned int bus_index, unsigned int dev_index, u64 *num_blocks); -int ps3_repository_read_dev_num_regions(unsigned int bus_index, +int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index, unsigned int dev_index, unsigned int *num_regions); -int ps3_repository_read_dev_region_id(unsigned int bus_index, +int ps3_repository_read_stor_dev_region_id(unsigned int bus_index, unsigned int dev_index, unsigned int region_index, unsigned int *region_id); -int ps3_repository_read_dev_region_size(unsigned int bus_index, +int ps3_repository_read_stor_dev_region_size(unsigned int bus_index, unsigned int dev_index, unsigned int region_index, u64 *region_size); -int ps3_repository_read_dev_region_start(unsigned int bus_index, +int ps3_repository_read_stor_dev_region_start(unsigned int bus_index, unsigned int dev_index, unsigned int region_index, u64 *region_start); +int ps3_repository_read_stor_dev_info(unsigned int bus_index, + unsigned int dev_index, u64 *port, u64 *blk_size, + u64 *num_blocks, unsigned int *num_regions); +int ps3_repository_read_stor_dev_region(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, + unsigned int *region_id, u64 *region_start, u64 *region_size); /* repository pu and memory info */ -- cgit v1.2.3 From 861be32ce7f1cf272a3f809e77213b83117a0bd2 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:08 -0800 Subject: [POWERPC] ps3: bind interrupt to cpu Change the PS3 irq allocation routines to take an argument indicating which cpu (processor thread) the interrupt should be serviced on. The current system configuration favors device interrupts that are serviced on cpu0, so that is used as the default. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 8fed3a041de..021f802161a 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -140,19 +140,28 @@ unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); /* inrerrupt routines */ -int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq); +enum ps3_cpu_binding { + PS3_BINDING_CPU_ANY = -1, + PS3_BINDING_CPU_0 = 0, + PS3_BINDING_CPU_1 = 1, +}; + +int ps3_alloc_io_irq(enum ps3_cpu_binding cpu, unsigned int interrupt_id, + unsigned int *virq); int ps3_free_io_irq(unsigned int virq); -int ps3_alloc_event_irq(unsigned int *virq); +int ps3_alloc_event_irq(enum ps3_cpu_binding cpu, unsigned int *virq); int ps3_free_event_irq(unsigned int virq); int ps3_send_event_locally(unsigned int virq); -int ps3_connect_event_irq(const struct ps3_device_id *did, - unsigned int interrupt_id, unsigned int *virq); +int ps3_connect_event_irq(enum ps3_cpu_binding cpu, + const struct ps3_device_id *did, unsigned int interrupt_id, + unsigned int *virq); int ps3_disconnect_event_irq(const struct ps3_device_id *did, unsigned int interrupt_id, unsigned int virq); -int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq); -int ps3_free_vuart_irq(unsigned int virq); -int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class, +int ps3_alloc_vuart_irq(enum ps3_cpu_binding cpu, void* virt_addr_bmp, unsigned int *virq); +int ps3_free_vuart_irq(unsigned int virq); +int ps3_alloc_spe_irq(enum ps3_cpu_binding cpu, unsigned long spe_id, + unsigned int class, unsigned int *virq); int ps3_free_spe_irq(unsigned int virq); /* lv1 result codes */ -- cgit v1.2.3 From b1eeb38e456281c37bbfc270a6ca08605b7e7045 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Jan 2007 19:08:12 -0800 Subject: [POWERPC] ps3: add interrupt alloc for outlets PS3 interrupt core update: - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt number for an interrupt outlet, which is needed by the PS3 GPU frame buffer device and audio drivers Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 021f802161a..00a4c7d3c6d 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -163,6 +163,9 @@ int ps3_free_vuart_irq(unsigned int virq); int ps3_alloc_spe_irq(enum ps3_cpu_binding cpu, unsigned long spe_id, unsigned int class, unsigned int *virq); int ps3_free_spe_irq(unsigned int virq); +int ps3_alloc_irq(enum ps3_cpu_binding cpu, unsigned long outlet, + unsigned int *virq); +int ps3_free_irq(unsigned int virq); /* lv1 result codes */ -- cgit v1.2.3 From 66b44954f8f2129a39d145991c8e635046a71be6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:21 -0800 Subject: [POWERPC] ps3: get firmware version Add a new routine ps3_get_firmware_version() and use it to output the firmware version to dmesg. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 00a4c7d3c6d..d1ae87df777 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -27,6 +27,18 @@ #include #include +union ps3_firmware_version { + u64 raw; + struct { + u16 pad; + u16 major; + u16 minor; + u16 rev; + }; +}; + +int ps3_get_firmware_version(union ps3_firmware_version *v); + /** * struct ps3_device_id - HV bus device identifier from the system repository * @bus_id: HV bus id, {1..} (zero invalid) -- cgit v1.2.3 From 098e27442713ef7921533130ebba5db6ef64aba6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Jan 2007 19:08:24 -0800 Subject: [POWERPC] ps3: get av_multi_out params Allow the PS3 AV settings driver to access the default video mode stored in the OS area. Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index d1ae87df777..f4347c195bf 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -39,6 +39,17 @@ union ps3_firmware_version { int ps3_get_firmware_version(union ps3_firmware_version *v); +/* 'Other OS' area */ + +enum ps3_param_av_multi_out { + PS3_PARAM_AV_MULTI_OUT_NTSC = 0, + PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1, + PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, + PS3_PARAM_AV_MULTI_OUT_SECAM = 3, +}; + +enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void); + /** * struct ps3_device_id - HV bus device identifier from the system repository * @bus_id: HV bus id, {1..} (zero invalid) -- cgit v1.2.3 From 8000d49076f5d1767b6fee9c74b452f488ed89ad Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:26 -0800 Subject: [POWERPC] ps3: remove unneeded header include Remove an unneeded header include from ps3.h. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index f4347c195bf..59ae9d7bf6a 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -21,7 +21,6 @@ #if !defined(_ASM_POWERPC_PS3_H) #define _ASM_POWERPC_PS3_H -#include /* for __deprecated */ #include #include #include -- cgit v1.2.3 From c69b767a2c871bb80cb9e346d6ebce248f711dfb Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 21:23:14 -0600 Subject: [POWERPC] Oprofile cleanup Clean up the ctr_read/write a bit. It's currently defined in the include but only used in one C file each. The only exception is the classic version, so keep that in the include and define in the C file as appropriate. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- include/asm-powerpc/oprofile_impl.h | 89 +------------------------------------ 1 file changed, 2 insertions(+), 87 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h index 71043bf3641..94c0ad2bff9 100644 --- a/include/asm-powerpc/oprofile_impl.h +++ b/include/asm-powerpc/oprofile_impl.h @@ -58,10 +58,8 @@ extern struct op_powerpc_model op_model_power4; extern struct op_powerpc_model op_model_7450; extern struct op_powerpc_model op_model_cell; -#ifndef CONFIG_FSL_BOOKE - /* All the classic PPC parts use these */ -static inline unsigned int ctr_read(unsigned int i) +static inline unsigned int classic_ctr_read(unsigned int i) { switch(i) { case 0: @@ -89,7 +87,7 @@ static inline unsigned int ctr_read(unsigned int i) } } -static inline void ctr_write(unsigned int i, unsigned int val) +static inline void classic_ctr_write(unsigned int i, unsigned int val) { switch(i) { case 0: @@ -124,89 +122,6 @@ static inline void ctr_write(unsigned int i, unsigned int val) break; } } -#else /* CONFIG_FSL_BOOKE */ -static inline u32 get_pmlca(int ctr) -{ - u32 pmlca; - - switch (ctr) { - case 0: - pmlca = mfpmr(PMRN_PMLCA0); - break; - case 1: - pmlca = mfpmr(PMRN_PMLCA1); - break; - case 2: - pmlca = mfpmr(PMRN_PMLCA2); - break; - case 3: - pmlca = mfpmr(PMRN_PMLCA3); - break; - default: - panic("Bad ctr number\n"); - } - - return pmlca; -} - -static inline void set_pmlca(int ctr, u32 pmlca) -{ - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - break; - default: - panic("Bad ctr number\n"); - } -} - -static inline unsigned int ctr_read(unsigned int i) -{ - switch(i) { - case 0: - return mfpmr(PMRN_PMC0); - case 1: - return mfpmr(PMRN_PMC1); - case 2: - return mfpmr(PMRN_PMC2); - case 3: - return mfpmr(PMRN_PMC3); - default: - return 0; - } -} - -static inline void ctr_write(unsigned int i, unsigned int val) -{ - switch(i) { - case 0: - mtpmr(PMRN_PMC0, val); - break; - case 1: - mtpmr(PMRN_PMC1, val); - break; - case 2: - mtpmr(PMRN_PMC2, val); - break; - case 3: - mtpmr(PMRN_PMC3, val); - break; - default: - break; - } -} - - -#endif /* CONFIG_FSL_BOOKE */ extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth); -- cgit v1.2.3 From 1bd2e5ae18a8f93333707d81d3dbd9209a255137 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 21:23:54 -0600 Subject: [POWERPC] Add PMC type to cputable Add cputable entries for which type of PMC implementation the processor has. I've only filled in the current 64-bit processors, the unfilled default value will have same behaviour as before so it can be done over time as needed. Also tidy up the dummy_perf implementation a bit, aggregating it into one function with ifdefs instead of several. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- include/asm-powerpc/cputable.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 80e314d2f24..e870b539317 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -50,6 +50,12 @@ enum powerpc_oprofile_type { PPC_OPROFILE_CELL = 5, }; +enum powerpc_pmc_type { + PPC_PMC_DEFAULT = 0, + PPC_PMC_IBM = 1, + PPC_PMC_PA6T = 2, +}; + struct cpu_spec { /* CPU is matched via (PVR & pvr_mask) == pvr_value */ unsigned int pvr_mask; @@ -65,6 +71,7 @@ struct cpu_spec { /* number of performance monitor counters */ unsigned int num_pmcs; + enum powerpc_pmc_type pmc_type; /* this is called to initialize various CPU bits like L1 cache, * BHT, SPD, etc... from head.S before branching to identify_machine -- cgit v1.2.3 From 7583b6e424ebaa278342f6a8c2a61211af56dad1 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 21:24:57 -0600 Subject: [POWERPC] Introduce _SYSDEV_ATTR Introduce _SYSDEV_ATTR(), to be used to just define the struct, and not a named variable with the attribute. Useful for arrays of sysdev_attributes. Signed-off-by: Olof Johansson Signed-off-by: Greg Kroah-Hartman Signed-off-by: Paul Mackerras --- include/linux/sysdev.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h index 166a2e58c28..389ccf858d3 100644 --- a/include/linux/sysdev.h +++ b/include/linux/sysdev.h @@ -98,12 +98,16 @@ struct sysdev_attribute { }; -#define SYSDEV_ATTR(_name,_mode,_show,_store) \ -struct sysdev_attribute attr_##_name = { \ - .attr = {.name = __stringify(_name), .mode = _mode }, \ +#define _SYSDEV_ATTR(_name,_mode,_show,_store) \ +{ \ + .attr = { .name = __stringify(_name), .mode = _mode, \ + .owner = THIS_MODULE }, \ .show = _show, \ .store = _store, \ -}; +} + +#define SYSDEV_ATTR(_name,_mode,_show,_store) \ +struct sysdev_attribute attr_##_name = _SYSDEV_ATTR(_name,_mode,_show,_store); extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *); extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *); -- cgit v1.2.3 From 6529c13dfe413e437ad1ed0e97783dcf69137114 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 21:25:57 -0600 Subject: [POWERPC] PA6T PMC support Support for PA6T-style PMC registers. PMCs are completely implementation-dependent on PPC, and PA6T numbers them differently from the IBM model. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- include/asm-powerpc/reg.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index a3631b15754..0279d4ec521 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -462,6 +462,13 @@ #define SPRN_SIAR 780 #define SPRN_SDAR 781 +#define PA6T_SPRN_PMC0 787 +#define PA6T_SPRN_PMC1 788 +#define PA6T_SPRN_PMC2 789 +#define PA6T_SPRN_PMC3 790 +#define PA6T_SPRN_PMC4 791 +#define PA6T_SPRN_PMC5 792 + #else /* 32-bit */ #define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */ #define MMCR0_FC 0x80000000UL /* freeze counters */ -- cgit v1.2.3 From 7df2457db83bc922fcc8b462526b77f1ffe8c84b Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 23:33:18 -0600 Subject: [POWERPC] MPIC: support more than 256 sources Allow more than the default 256 MPIC sources. Allocates a new flag (MPIC_LARGE_VECTORS) to be used by platform code when instantiating the mpic. I picked 11 bits worth right now since it would cover the number of sources on any hardware I have seen. It can always be increased later if needed. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpic.h | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index b71e7b32a55..cb204a71e91 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -102,21 +102,6 @@ #define MPIC_MAX_CPUS 32 #define MPIC_MAX_ISU 32 -/* - * Special vector numbers (internal use only) - */ -#define MPIC_VEC_SPURRIOUS 255 -#define MPIC_VEC_IPI_3 254 -#define MPIC_VEC_IPI_2 253 -#define MPIC_VEC_IPI_1 252 -#define MPIC_VEC_IPI_0 251 - -/* unused */ -#define MPIC_VEC_TIMER_3 250 -#define MPIC_VEC_TIMER_2 249 -#define MPIC_VEC_TIMER_1 248 -#define MPIC_VEC_TIMER_0 247 - /* * Tsi108 implementation of MPIC has many differences from the original one */ @@ -276,6 +261,13 @@ struct mpic unsigned char *senses; unsigned int senses_count; + /* vector numbers used for internal sources (ipi/timers) */ + unsigned int ipi_vecs[4]; + unsigned int timer_vecs[4]; + + /* Spurious vector to program into unused sources */ + unsigned int spurious_vec; + #ifdef CONFIG_MPIC_BROKEN_U3 /* The fixup table */ struct mpic_irq_fixup *fixups; @@ -332,6 +324,8 @@ struct mpic #define MPIC_NO_PTHROU_DIS 0x00000040 /* DCR based MPIC */ #define MPIC_USES_DCR 0x00000080 +/* MPIC has 11-bit vector fields (or larger) */ +#define MPIC_LARGE_VECTORS 0x00000100 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 -- cgit v1.2.3 From 63c2f782e8f6aafbc11b14b2cb291b3dc9fc217d Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 30 Jan 2007 06:06:00 -0500 Subject: [POWERPC] Add "is_power_of_2" checking to log2.h. Add the inline function "is_power_of_2()" to log2.h, where the value zero is *not* considered to be a power of two. Signed-off-by: Robert P. J. Day Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- include/linux/log2.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/log2.h b/include/linux/log2.h index d02e1a547a7..99922bedfcc 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -43,6 +43,17 @@ int __ilog2_u64(u64 n) } #endif +/* + * Determine whether some value is a power of two, where zero is + * *not* considered a power of two. + */ + +static inline __attribute__((const)) +bool is_power_of_2(unsigned long n) +{ + return (n != 0 && ((n & (n - 1)) == 0)); +} + /* * round up to nearest power of two */ -- cgit v1.2.3 From 2a08ea69a3e448a5cc94e5da9eccc40cf13f9532 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 30 Jan 2007 15:20:27 -0800 Subject: [POWERPC] PS3: Move system bus to platform directory Move the PS3 system bus routines from drivers/ps3 to arch/powerpc/platforms/ps3. Signed-off-by: Geoff Levand Acked-by: Benjamin Herrenschmidt Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 150 ---------------------------------------------- 1 file changed, 150 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 59ae9d7bf6a..873aab042c7 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -24,7 +24,6 @@ #include #include #include -#include union ps3_firmware_version { u64 raw; @@ -282,155 +281,6 @@ static inline const char* ps3_result(int result) #endif } -/* repository bus info */ - -enum ps3_bus_type { - PS3_BUS_TYPE_SB = 4, - PS3_BUS_TYPE_STORAGE = 5, -}; - -enum ps3_dev_type { - PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ - PS3_DEV_TYPE_SB_GELIC = 3, - PS3_DEV_TYPE_SB_USB = 4, - PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ - PS3_DEV_TYPE_SB_GPIO = 6, - PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ -}; - -int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str, - u64 *value); -int ps3_repository_read_bus_id(unsigned int bus_index, unsigned int *bus_id); -int ps3_repository_read_bus_type(unsigned int bus_index, - enum ps3_bus_type *bus_type); -int ps3_repository_read_bus_num_dev(unsigned int bus_index, - unsigned int *num_dev); - -/* repository bus device info */ - -enum ps3_interrupt_type { - PS3_INTERRUPT_TYPE_EVENT_PORT = 2, - PS3_INTERRUPT_TYPE_SB_OHCI = 3, - PS3_INTERRUPT_TYPE_SB_EHCI = 4, - PS3_INTERRUPT_TYPE_OTHER = 5, -}; - -enum ps3_reg_type { - PS3_REG_TYPE_SB_OHCI = 3, - PS3_REG_TYPE_SB_EHCI = 4, - PS3_REG_TYPE_SB_GPIO = 5, -}; - -int ps3_repository_read_dev_str(unsigned int bus_index, - unsigned int dev_index, const char *dev_str, u64 *value); -int ps3_repository_read_dev_id(unsigned int bus_index, unsigned int dev_index, - unsigned int *dev_id); -int ps3_repository_read_dev_type(unsigned int bus_index, - unsigned int dev_index, enum ps3_dev_type *dev_type); -int ps3_repository_read_dev_intr(unsigned int bus_index, - unsigned int dev_index, unsigned int intr_index, - enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id); -int ps3_repository_read_dev_reg_type(unsigned int bus_index, - unsigned int dev_index, unsigned int reg_index, - enum ps3_reg_type *reg_type); -int ps3_repository_read_dev_reg_addr(unsigned int bus_index, - unsigned int dev_index, unsigned int reg_index, u64 *bus_addr, - u64 *len); -int ps3_repository_read_dev_reg(unsigned int bus_index, - unsigned int dev_index, unsigned int reg_index, - enum ps3_reg_type *reg_type, u64 *bus_addr, u64 *len); - -/* repository bus enumerators */ - -struct ps3_repository_device { - unsigned int bus_index; - unsigned int dev_index; - struct ps3_device_id did; -}; - -int ps3_repository_find_device(enum ps3_bus_type bus_type, - enum ps3_dev_type dev_type, - const struct ps3_repository_device *start_dev, - struct ps3_repository_device *dev); -static inline int ps3_repository_find_first_device( - enum ps3_bus_type bus_type, enum ps3_dev_type dev_type, - struct ps3_repository_device *dev) -{ - return ps3_repository_find_device(bus_type, dev_type, NULL, dev); -} -int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, - enum ps3_interrupt_type intr_type, unsigned int *interrupt_id); -int ps3_repository_find_reg(const struct ps3_repository_device *dev, - enum ps3_reg_type reg_type, u64 *bus_addr, u64 *len); - -/* repository block device info */ - -int ps3_repository_read_stor_dev_port(unsigned int bus_index, - unsigned int dev_index, u64 *port); -int ps3_repository_read_stor_dev_blk_size(unsigned int bus_index, - unsigned int dev_index, u64 *blk_size); -int ps3_repository_read_stor_dev_num_blocks(unsigned int bus_index, - unsigned int dev_index, u64 *num_blocks); -int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index, - unsigned int dev_index, unsigned int *num_regions); -int ps3_repository_read_stor_dev_region_id(unsigned int bus_index, - unsigned int dev_index, unsigned int region_index, - unsigned int *region_id); -int ps3_repository_read_stor_dev_region_size(unsigned int bus_index, - unsigned int dev_index, unsigned int region_index, u64 *region_size); -int ps3_repository_read_stor_dev_region_start(unsigned int bus_index, - unsigned int dev_index, unsigned int region_index, u64 *region_start); -int ps3_repository_read_stor_dev_info(unsigned int bus_index, - unsigned int dev_index, u64 *port, u64 *blk_size, - u64 *num_blocks, unsigned int *num_regions); -int ps3_repository_read_stor_dev_region(unsigned int bus_index, - unsigned int dev_index, unsigned int region_index, - unsigned int *region_id, u64 *region_start, u64 *region_size); - -/* repository pu and memory info */ - -int ps3_repository_read_num_pu(unsigned int *num_pu); -int ps3_repository_read_ppe_id(unsigned int *pu_index, unsigned int *ppe_id); -int ps3_repository_read_rm_base(unsigned int ppe_id, u64 *rm_base); -int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size); -int ps3_repository_read_region_total(u64 *region_total); -int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, - u64 *region_total); - -/* repository pme info */ - -int ps3_repository_read_num_be(unsigned int *num_be); -int ps3_repository_read_be_node_id(unsigned int be_index, u64 *node_id); -int ps3_repository_read_tb_freq(u64 node_id, u64 *tb_freq); -int ps3_repository_read_be_tb_freq(unsigned int be_index, u64 *tb_freq); - -/* repository 'Other OS' area */ - -int ps3_repository_read_boot_dat_addr(u64 *lpar_addr); -int ps3_repository_read_boot_dat_size(unsigned int *size); -int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size); - -/* repository spu info */ - -/** - * enum spu_resource_type - Type of spu resource. - * @spu_resource_type_shared: Logical spu is shared with other partions. - * @spu_resource_type_exclusive: Logical spu is not shared with other partions. - * - * Returned by ps3_repository_read_spu_resource_id(). - */ - -enum ps3_spu_resource_type { - PS3_SPU_RESOURCE_TYPE_SHARED = 0, - PS3_SPU_RESOURCE_TYPE_EXCLUSIVE = 0x8000000000000000UL, -}; - -int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved); -int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id); -int ps3_repository_read_spu_resource_id(unsigned int res_index, - enum ps3_spu_resource_type* resource_type, unsigned int *resource_id); - - /* system bus routines */ enum ps3_match_id { -- cgit v1.2.3 From 97ec1675999eae96975a30facbedc2e6c0c832bc Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 30 Jan 2007 15:20:30 -0800 Subject: [POWERPC] PS3: Move vuart declarations to ps3.h Move the structures and routines needed for PS3 vuart port device registration to asm-powerpc/ps3.h. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/ps3.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 873aab042c7..4f5a1e01fda 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -353,4 +353,39 @@ static inline void *ps3_system_bus_get_driver_data( extern struct bus_type ps3_system_bus_type; +/* vuart routines */ + +struct ps3_vuart_stats { + unsigned long bytes_written; + unsigned long bytes_read; + unsigned long tx_interrupts; + unsigned long rx_interrupts; + unsigned long disconnect_interrupts; +}; + +/** + * struct ps3_vuart_port_device - a device on a vuart port + */ + +struct ps3_vuart_port_device { + enum ps3_match_id match_id; + struct device core; + + /* private driver variables */ + unsigned int port_number; + u64 interrupt_mask; + struct { + spinlock_t lock; + struct list_head head; + } tx_list; + struct { + unsigned long bytes_held; + spinlock_t lock; + struct list_head head; + } rx_list; + struct ps3_vuart_stats stats; +}; + +int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev); + #endif -- cgit v1.2.3 From 73844ecbaa58885c5e89af7d1b08faaffffa6833 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 31 Jan 2007 02:08:54 +0300 Subject: [POWERPC] cpm2: CPM2 interrupt controller fix This contains important fixes for the CPM2 PIC code. Eliminated CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt mapping. Updated devicetree files to reflect that. Changed direct IC-related IO accesses to the IO accessors. Fixed all the sense values to keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs and hence could be hardly usable. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc8260.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/asm-powerpc/mpc8260.h (limited to 'include') diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h new file mode 100644 index 00000000000..f1b83b09ab2 --- /dev/null +++ b/include/asm-powerpc/mpc8260.h @@ -0,0 +1,24 @@ +/* + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8260 configuration, they all include + * this one and the configuration switching is done here. + */ +#ifdef __KERNEL__ +#ifndef __ASM_PPC_MPC8260_H__ +#define __ASM_PPC_MPC8260_H__ + + +#ifdef CONFIG_8260 + +#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) +#include +#endif + +#ifdef CONFIG_PCI_8260 +#include +#endif + +#endif /* CONFIG_8260 */ +#endif /* !__ASM_PPC_MPC8260_H__ */ +#endif /* __KERNEL__ */ -- cgit v1.2.3 From 5427828e83b7f3c000eaec1cfb09c9bc4d024ad1 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 31 Jan 2007 02:09:00 +0300 Subject: [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the current kernel. Current patch fixes it, as well as other inconsistencies expressed, that do not permit targets from working properly: - Updated dts with a chosen node with interrupt controller, - fixed messed device IDs among CPM2 SoC devices, - corrected odd header name and fixed type in defines, - Added 82xx subdir to the powerpc/platforms Makefile, missed during initial commit, - new solely-powerpc header file for 8260 family (was using one from arch/ppc, this one cleaned up from the extra stuff), in fact for now a placeholder to get the board-specific includes for stuff not yet capable to live with devicetree peeks only - Fixed couple of misprints in reference mpc8272 dts. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- include/asm-powerpc/fs_pd.h | 6 ++++++ include/asm-powerpc/io.h | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h index 1e2962fc4fa..c624915b757 100644 --- a/include/asm-powerpc/fs_pd.h +++ b/include/asm-powerpc/fs_pd.h @@ -17,6 +17,12 @@ #ifdef CONFIG_CPM2 #include +#if defined(CONFIG_8260) +#include +#elif defined(CONFIG_85xx) +#include +#endif + #define cpm2_map(member) \ ({ \ u32 offset = offsetof(cpm2_map_t, member); \ diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 1cd532379c3..301c9bb308b 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -732,6 +732,12 @@ static inline void * bus_to_virt(unsigned long address) #endif /* CONFIG_PPC32 */ +/* access ports */ +#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) +#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) + +#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) +#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) #endif /* __KERNEL__ */ -- cgit v1.2.3 From fe4a0cf1c2e79c3c256992c4f731734ecacb45c3 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:42:28 +0900 Subject: [POWERPC] Celleb: htab routines Adds htab routines for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/mmu.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index 41c8c9c5a25..200055a4b82 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -247,6 +247,7 @@ extern void htab_initialize_secondary(void); extern void hpte_init_native(void); extern void hpte_init_lpar(void); extern void hpte_init_iSeries(void); +extern void hpte_init_beat(void); extern void stabs_alloc(void); extern void slb_initialize(void); -- cgit v1.2.3 From d7480a9feaa970d9c37462f21bc27ebab2c56b0b Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:43:21 +0900 Subject: [POWERPC] Celleb: support udbg This patch adds udbg support for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/udbg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index 55e57844fa7..ce67e6cfc7e 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -44,6 +44,7 @@ extern void __init udbg_init_maple_realmode(void); extern void __init udbg_init_iseries(void); extern void __init udbg_init_rtas_panel(void); extern void __init udbg_init_rtas_console(void); +extern void __init udbg_init_debug_beat(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ -- cgit v1.2.3 From c9868fe0e091f64241a372b45f08097c013e41b2 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:45:33 +0900 Subject: [POWERPC] Celleb: consolidate spu management ops Spu management ops in arch/platforms/cell/spu_priv1_mmio.h can be used commonly in of based platform. This patch separates spu management ops from native cell code and uses on celleb platform. Signed-off-by: Arnd Bergmann Signed-off-by: Kou Ishizaki Signed-off-by: Paul Mackerras --- include/asm-powerpc/spu.h | 13 +++++++++++++ include/asm-powerpc/spu_priv1.h | 2 ++ 2 files changed, 15 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 3d90264e9d3..b634e16575f 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -104,6 +104,7 @@ struct spu_context; struct spu_runqueue; +struct device_node; struct spu { const char *name; @@ -142,7 +143,19 @@ struct spu { char irq_c1[8]; char irq_c2[8]; + u64 spe_id; + void* pdata; /* platform private data */ + + /* of based platforms only */ + struct device_node *devnode; + + /* native only */ + struct spu_priv1 __iomem *priv1; + + /* beat only */ + u64 shadow_int_mask_RW[3]; + struct sys_device sysdev; }; diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h index 69dcb0c5388..7e78f6a1ab8 100644 --- a/include/asm-powerpc/spu_priv1.h +++ b/include/asm-powerpc/spu_priv1.h @@ -206,6 +206,8 @@ spu_destroy_spu (struct spu *spu) */ extern const struct spu_priv1_ops spu_priv1_mmio_ops; +extern const struct spu_priv1_ops spu_priv1_beat_ops; + extern const struct spu_management_ops spu_management_of_ops; #endif /* __KERNEL__ */ -- cgit v1.2.3 From c347b7989e4d9e1c23cb5cfba78c63c031b7dcee Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:47:17 +0900 Subject: [POWERPC] Celleb: basic support This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/firmware.h | 9 +++++++++ include/asm-powerpc/smp.h | 1 + 2 files changed, 10 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index 98f7b62422c..abba808cc53 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -43,6 +43,7 @@ #define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) #define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) #define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) +#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000) #ifndef __ASSEMBLY__ @@ -61,6 +62,8 @@ enum { FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT, + FW_FEATURE_CELLEB_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_BEAT, FW_FEATURE_NATIVE_POSSIBLE = 0, FW_FEATURE_NATIVE_ALWAYS = 0, FW_FEATURE_POSSIBLE = @@ -73,6 +76,9 @@ enum { #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_POSSIBLE | #endif +#ifdef CONFIG_PPC_CELLEB + FW_FEATURE_CELLEB_POSSIBLE | +#endif #ifdef CONFIG_PPC_NATIVE FW_FEATURE_NATIVE_ALWAYS | #endif @@ -87,6 +93,9 @@ enum { #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_ALWAYS & #endif +#ifdef CONFIG_PPC_CELLEB + FW_FEATURE_CELLEB_ALWAYS & +#endif #ifdef CONFIG_PPC_NATIVE FW_FEATURE_NATIVE_ALWAYS & #endif diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h index 20ea7c70bc3..01717f266dc 100644 --- a/include/asm-powerpc/smp.h +++ b/include/asm-powerpc/smp.h @@ -75,6 +75,7 @@ extern cpumask_t cpu_sibling_map[NR_CPUS]; void smp_init_iSeries(void); void smp_init_pSeries(void); void smp_init_cell(void); +void smp_init_celleb(void); void smp_setup_cpu_maps(void); extern int __cpu_disable(void); -- cgit v1.2.3 From 39c870d5b503fa684198baf90bab2daa35ef0151 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:49 -0600 Subject: [POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- include/asm-powerpc/udbg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index ce67e6cfc7e..4cbc313aa02 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -41,6 +41,7 @@ extern void __init udbg_early_init(void); extern void __init udbg_init_debug_lpar(void); extern void __init udbg_init_pmac_realmode(void); extern void __init udbg_init_maple_realmode(void); +extern void __init udbg_init_pas_realmode(void); extern void __init udbg_init_iseries(void); extern void __init udbg_init_rtas_panel(void); extern void __init udbg_init_rtas_console(void); -- cgit v1.2.3 From 1199919b69ff9559a3d3444fb5eb45b7cc48264d Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:51 -0600 Subject: [POWERPC] pasemi: Idle loops Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by: Olof Johansson Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/reg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 0279d4ec521..923df6ceaa5 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -166,6 +166,7 @@ #define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ #define SPRN_SPURR 0x134 /* Scaled PURR */ #define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ +#define SPRN_LPCR 0x13E /* LPAR Control Register */ #define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ #define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ #define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ -- cgit v1.2.3 From c388cfebbf22acd2b6adf757b35e28d4be66ac7c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:53 -0600 Subject: [POWERPC] pasemi: SMP timebase sync Timebase update is simple on PA6T, since global updates can be done from one core by writing to an SPR. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- include/asm-powerpc/reg.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 923df6ceaa5..0d7f0164ed8 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -392,6 +392,12 @@ #define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */ #define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */ +#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */ +#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */ +#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */ +#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */ +#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */ + #ifndef SPRN_SVR #define SPRN_SVR 0x11E /* System Version Register */ #endif -- cgit v1.2.3 From 31c56d820e03a2fd47f81d6c826f92caf511f9ee Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:55 -0600 Subject: [POWERPC] pasemi: iommu support I/O TLB support for PA6T-1682M. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- include/asm-powerpc/iommu.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index f85dbd30555..b2e56b30306 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -99,6 +99,7 @@ extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, extern void iommu_init_early_pSeries(void); extern void iommu_init_early_iSeries(void); extern void iommu_init_early_dart(void); +extern void iommu_init_early_pasemi(void); #ifdef CONFIG_PCI extern void pci_iommu_init(void); -- cgit v1.2.3 From a2c70211fa072f4076f0e59f909b69105f69072e Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 6 Feb 2007 11:48:28 +1100 Subject: [POWERPC] Compile fixes for arch/powerpc dcr code The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- include/asm-powerpc/dcr.h | 1 + include/asm-ppc/ibm4xx.h | 1 + include/asm-ppc/reg_booke.h | 2 -- 3 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h index b66c5e6941f..9338d50538f 100644 --- a/include/asm-powerpc/dcr.h +++ b/include/asm-powerpc/dcr.h @@ -33,6 +33,7 @@ * base from the device-tree */ #ifdef CONFIG_PPC_MERGE +struct device_node; extern unsigned int dcr_resource_start(struct device_node *np, unsigned int index); extern unsigned int dcr_resource_len(struct device_node *np, diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h index 499c14691c7..7a64ede53bb 100644 --- a/include/asm-ppc/ibm4xx.h +++ b/include/asm-ppc/ibm4xx.h @@ -15,6 +15,7 @@ #define __ASM_IBM4XX_H__ #include +#include #ifdef CONFIG_40x diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h index a263fc1e65c..82948ed2744 100644 --- a/include/asm-ppc/reg_booke.h +++ b/include/asm-ppc/reg_booke.h @@ -9,8 +9,6 @@ #ifndef __ASM_PPC_REG_BOOKE_H__ #define __ASM_PPC_REG_BOOKE_H__ -#include - #ifndef __ASSEMBLY__ /* Performance Monitor Registers */ #define mfpmr(rn) ({unsigned int rval; \ -- cgit v1.2.3 From f03e64f2ca6ee3d0b7824536b1940497701fe766 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 6 Feb 2007 21:10:31 +1100 Subject: [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call H_BULK_REMOVE lets us remove 4 entries from the MMU hash table with one hypervisor call. This uses it in pSeries_lpar_hpte_invalidate so we can tear down mappings with fewer hypervisor calls. Signed-off-by: Paul Mackerras --- include/asm-powerpc/hvcall.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h index 7a500732b67..60977806d2f 100644 --- a/include/asm-powerpc/hvcall.h +++ b/include/asm-powerpc/hvcall.h @@ -168,6 +168,7 @@ #define H_FREE_LOGICAL_LAN 0x118 #define H_ADD_LOGICAL_LAN_BUFFER 0x11C #define H_SEND_LOGICAL_LAN 0x120 +#define H_BULK_REMOVE 0x124 #define H_MULTICAST_CTRL 0x130 #define H_SET_XDABR 0x134 #define H_STUFF_TCE 0x138 -- cgit v1.2.3 From 8209003547c4b1006943eac8dc6c1fb6493cafda Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 6 Feb 2007 22:55:19 -0600 Subject: [POWERPC] Added kprobes support to ppc32 Added kprobes to ppc32 platforms that have use single_step_exception. This excludes 4xx and anything Book-E since their debug mechanisms for single stepping are completely different. Signed-off-by: Kumar Gala --- include/asm-powerpc/kprobes.h | 7 ++++++- include/asm-powerpc/sstep.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h index 2dafa376a63..3a5dd492588 100644 --- a/include/asm-powerpc/kprobes.h +++ b/include/asm-powerpc/kprobes.h @@ -44,6 +44,7 @@ typedef unsigned int kprobe_opcode_t; #define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) #define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) +#ifdef CONFIG_PPC64 /* * 64bit powerpc uses function descriptors. * Handle cases where: @@ -67,9 +68,13 @@ typedef unsigned int kprobe_opcode_t; } #define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)((func_descr_t *)pentry) - #define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ IS_TWI(instr) || IS_TDI(instr)) +#else +/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */ +#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)(pentry) +#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr)) +#endif #define ARCH_SUPPORTS_KRETPROBES #define ARCH_INACTIVE_KPROBE_COUNT 1 diff --git a/include/asm-powerpc/sstep.h b/include/asm-powerpc/sstep.h index 630a9889c07..f593b0f9b62 100644 --- a/include/asm-powerpc/sstep.h +++ b/include/asm-powerpc/sstep.h @@ -21,6 +21,7 @@ struct pt_regs; */ #define IS_MTMSRD(instr) (((instr) & 0xfc0007be) == 0x7c000124) #define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024) +#define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064) /* Emulate instructions that cause a transfer of control. */ extern int emulate_step(struct pt_regs *regs, unsigned int instr); -- cgit v1.2.3 From 33dced2ea5ed03dda10e7f9f41f0910f32e02eaa Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 Feb 2007 18:18:45 +0100 Subject: ide: add Toshiba TC86C001 IDE driver (take 2) This is the driver for the Toshiba TC86C001 GOKU-S PCI IDE controller, completely reworked from the original brain-damaged Toshiba's 2.4 version. This single channel UltraDMA/66 controller is very simple in programming, yet Toshiba managed to plant many interesting bugs in it. The particularly nasty "limitation 5" (as they call the errata) caused me to abuse the IDE core in a possibly most interesting way so far. However, this is still better than the #ifdef mess in drivers/ide/ide-io.c that the original version included (well, it had much more mess)... Signed-off-by: Sergei Shtylyov Acked-by: Alan Cox Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ccd706f876e..b859faf5184 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1454,6 +1454,7 @@ #define PCI_VENDOR_ID_TOSHIBA_2 0x102f #define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030 +#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE 0x0105 #define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108 #define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3 -- cgit v1.2.3 From e3a59b4d9378522479609042836ae930305a67fe Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 7 Feb 2007 18:19:37 +0100 Subject: ACPI support for IDE devices This patch implements ACPI integration for generic IDE devices. The ACPI spec mandates that some methods are called during suspend and resume. And consequently there most modern Laptops cannot resume properly without it. According to the spec, we should call '_GTM' (Get Timing) upon suspend to store the current IDE adapter settings. Upon resume we should call '_STM' (Set Timing) to initialize the adapter with the stored settings; afterwards '_GTF' (Get Taskfile) should be called which returns a buffer with some IDE initialisation commands. Those commands should be passed to the drive. There are two module params which control the behaviour of this patch: 'ide=noacpi' Do not call any ACPI methods (Disables any ACPI method calls) 'ide=acpigtf' Enable execution of _GTF methods upon resume. Has no effect if 'ide=noacpi' is set. 'ide=acpionboot' Enable execution of ACPI methods during boot. This might be required on some machines if 'ide=acpigtf' is selected as some machines modify the _GTF information depending on the drive identification passed down with _STM. Signed-off-by: Hannes Reinecke Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'include') diff --git a/include/linux/ide.h b/include/linux/ide.h index e26a03981a9..ba1c92999f6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -18,6 +18,9 @@ #include #include #include +#ifdef CONFIG_BLK_DEV_IDEACPI +#include +#endif #include #include #include @@ -541,6 +544,11 @@ typedef enum { struct ide_driver_s; struct ide_settings_s; +#ifdef CONFIG_BLK_DEV_IDEACPI +struct ide_acpi_drive_link; +struct ide_acpi_hwif_link; +#endif + typedef struct ide_drive_s { char name[4]; /* drive name, such as "hda" */ char driver_req[10]; /* requests specific driver */ @@ -637,6 +645,9 @@ typedef struct ide_drive_s { int lun; /* logical unit */ int crc_count; /* crc counter to reduce drive speed */ +#ifdef CONFIG_BLK_DEV_IDEACPI + struct ide_acpi_drive_link *acpidata; +#endif struct list_head list; struct device gendev; struct completion gendev_rel_comp; /* to deal with device release() */ @@ -804,6 +815,10 @@ typedef struct hwif_s { void *hwif_data; /* extra hwif data */ unsigned dma; + +#ifdef CONFIG_BLK_DEV_IDEACPI + struct ide_acpi_hwif_link *acpidata; +#endif } ____cacheline_internodealigned_in_smp ide_hwif_t; /* @@ -1298,6 +1313,18 @@ static inline void ide_dma_verbose(ide_drive_t *drive) { ; } static inline void ide_release_dma(ide_hwif_t *drive) {;} #endif +#ifdef CONFIG_BLK_DEV_IDEACPI +extern int ide_acpi_exec_tfs(ide_drive_t *drive); +extern void ide_acpi_get_timing(ide_hwif_t *hwif); +extern void ide_acpi_push_timing(ide_hwif_t *hwif); +extern void ide_acpi_init(ide_hwif_t *hwif); +#else +static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; } +static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_init(ide_hwif_t *hwif) { ; } +#endif + extern int ide_hwif_request_regions(ide_hwif_t *hwif); extern void ide_hwif_release_regions(ide_hwif_t* hwif); extern void ide_unregister (unsigned int index); -- cgit v1.2.3 From 873733188a019acdb7fa253011cbdc0a8afd97f3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 12 Sep 2006 17:00:10 +0200 Subject: Driver core: convert pcmcia code to use struct device Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Cc: Signed-off-by: Greg Kroah-Hartman --- include/pcmcia/ss.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index 623a0fc0dae..6e84258b94d 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -284,7 +284,7 @@ struct pcmcia_socket { #endif /* socket device */ - struct class_device dev; + struct device dev; void *driver_data; /* data internal to the socket driver */ }; -- cgit v1.2.3 From 2943ecf2ed32632473c06f1975db47a7aa98c10f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 22 Jan 2007 13:45:38 -0800 Subject: Driver core: convert SPI code to use struct device Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Cc: Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 176f6e36dbf..8c2edd82a07 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -170,7 +170,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * message's completion function when the transaction completes. */ struct spi_master { - struct class_device cdev; + struct device dev; /* other than negative (== assign one dynamically), bus_num is fully * board-specific. usually that simplifies to being SOC-specific. @@ -216,17 +216,17 @@ struct spi_master { static inline void *spi_master_get_devdata(struct spi_master *master) { - return class_get_devdata(&master->cdev); + return dev_get_drvdata(&master->dev); } static inline void spi_master_set_devdata(struct spi_master *master, void *data) { - class_set_devdata(&master->cdev, data); + dev_set_drvdata(&master->dev, data); } static inline struct spi_master *spi_master_get(struct spi_master *master) { - if (!master || !class_device_get(&master->cdev)) + if (!master || !get_device(&master->dev)) return NULL; return master; } @@ -234,7 +234,7 @@ static inline struct spi_master *spi_master_get(struct spi_master *master) static inline void spi_master_put(struct spi_master *master) { if (master) - class_device_put(&master->cdev); + put_device(&master->dev); } -- cgit v1.2.3 From 43cb76d91ee85f579a69d42bc8efc08bac560278 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Apr 2002 12:14:34 -0700 Subject: Network: convert network devices to use struct device instead of class_device This lets the network core have the ability to handle suspend/resume issues, if it wants to. Thanks to Frederik Deweerdt for the arm driver fixes. Signed-off-by: Greg Kroah-Hartman --- include/linux/netdevice.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index fea0d9db684..2e37f501278 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -529,10 +529,11 @@ struct net_device struct net_bridge_port *br_port; /* class/net/name entry */ - struct class_device class_dev; + struct device dev; /* space for optional statistics and wireless sysfs groups */ struct attribute_group *sysfs_groups[3]; }; +#define to_net_dev(d) container_of(d, struct net_device, dev) #define NETDEV_ALIGN 32 #define NETDEV_ALIGN_CONST (NETDEV_ALIGN - 1) @@ -548,7 +549,7 @@ static inline void *netdev_priv(struct net_device *dev) /* Set the sysfs physical device reference for the network logical device * if set prior to registration will cause a symlink during initialization. */ -#define SET_NETDEV_DEV(net, pdev) ((net)->class_dev.dev = (pdev)) +#define SET_NETDEV_DEV(net, pdev) ((net)->dev.parent = (pdev)) struct packet_type { __be16 type; /* This is really htons(ether_type). */ -- cgit v1.2.3 From f30c53a873d0d227493197064b8886af2d57bbd6 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Mon, 15 Jan 2007 20:22:02 +0100 Subject: MODULES: add the module name for built in kernel drivers Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 1 + include/linux/module.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index f44247fe813..da722191311 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -126,6 +126,7 @@ struct device_driver { struct klist_node knode_bus; struct module * owner; + const char * mod_name; /* used for built-in modules */ int (*probe) (struct device * dev); int (*remove) (struct device * dev); diff --git a/include/linux/module.h b/include/linux/module.h index 10f771a4999..90dc2542978 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -58,6 +58,7 @@ struct module_kobject { struct kobject kobj; struct module *mod; + struct kobject *drivers_dir; }; /* These are either module local, or the kernel's dummy ones. */ @@ -263,7 +264,6 @@ struct module struct module_attribute *modinfo_attrs; const char *version; const char *srcversion; - struct kobject *drivers_dir; /* Exported symbols */ const struct kernel_symbol *syms; -- cgit v1.2.3 From 725522b5453dd680412f2b6463a988e4fd148757 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 15 Jan 2007 11:50:02 -0800 Subject: PCI: add the sysfs driver name to all modules This adds the module name to all PCI drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ It also fixes up the IDE core, which was calling __pci_register_driver() directly. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/ide.h | 4 ++-- include/linux/pci.h | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/ide.h b/include/linux/ide.h index e26a03981a9..827688f41d6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1192,8 +1192,8 @@ void ide_init_disk(struct gendisk *, ide_drive_t *); extern int ideprobe_init(void); extern void ide_scan_pcibus(int scan_direction) __init; -extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner); -#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE) +extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name); +#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME) void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *); extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d); diff --git a/include/linux/pci.h b/include/linux/pci.h index f3c617eabd8..cb899eb95d3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -573,10 +573,11 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, void pci_enable_bridges(struct pci_bus *bus); /* Proper probing supporting hot-pluggable devices */ -int __must_check __pci_register_driver(struct pci_driver *, struct module *); +int __must_check __pci_register_driver(struct pci_driver *, struct module *, + const char *mod_name); static inline int __must_check pci_register_driver(struct pci_driver *driver) { - return __pci_register_driver(driver, THIS_MODULE); + return __pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME); } void pci_unregister_driver(struct pci_driver *); -- cgit v1.2.3 From 4b315627e6b894156e235ac905786e7d46aab2e6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 15 Jan 2007 11:50:02 -0800 Subject: SERIO: add the sysfs driver name to all modules This adds the module name to all SERIO drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/serio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/serio.h b/include/linux/serio.h index 0f478a8791a..ac2c70e7f76 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -86,6 +86,11 @@ static inline void serio_register_port(struct serio *serio) void serio_unregister_port(struct serio *serio); void serio_unregister_child_port(struct serio *serio); +int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name); +static inline int serio_register_driver(struct serio_driver *drv) +{ + return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME); +} int serio_register_driver(struct serio_driver *drv); void serio_unregister_driver(struct serio_driver *drv); -- cgit v1.2.3 From 80f745fb1b0fb11383cbb8df2c36aaaa0399b6e6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 15 Jan 2007 11:50:02 -0800 Subject: USB: add the sysfs driver name to all modules This adds the module name to all USB drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index aab5b1b7202..733f38de497 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -868,10 +868,11 @@ struct usb_class_driver { * use these in module_init()/module_exit() * and don't forget MODULE_DEVICE_TABLE(usb, ...) */ -extern int usb_register_driver(struct usb_driver *, struct module *); +extern int usb_register_driver(struct usb_driver *, struct module *, + const char *); static inline int usb_register(struct usb_driver *driver) { - return usb_register_driver(driver, THIS_MODULE); + return usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME); } extern void usb_deregister(struct usb_driver *); -- cgit v1.2.3 From 270a6c4cad809e92d7b81adde92d0b3d94eeb8ee Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 18 Jan 2007 13:26:15 +0100 Subject: /sys/modules/*/holders /sys/module/usbcore/ |-- drivers | |-- usb:hub -> ../../../subsystem/usb/drivers/hub | |-- usb:usb -> ../../../subsystem/usb/drivers/usb | `-- usb:usbfs -> ../../../subsystem/usb/drivers/usbfs |-- holders | |-- ehci_hcd -> ../../../module/ehci_hcd | |-- uhci_hcd -> ../../../module/uhci_hcd | |-- usb_storage -> ../../../module/usb_storage | `-- usbhid -> ../../../module/usbhid |-- initstate Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/module.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/module.h b/include/linux/module.h index 90dc2542978..419d3ef293d 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -264,6 +264,7 @@ struct module struct module_attribute *modinfo_attrs; const char *version; const char *srcversion; + struct kobject *holders_dir; /* Exported symbols */ const struct kernel_symbol *syms; -- cgit v1.2.3 From bf0acc330229554c695e4f95e5aa2d2c4f12de1f Mon Sep 17 00:00:00 2001 From: Frank Haverkamp Date: Wed, 17 Jan 2007 17:51:18 +0100 Subject: SYSFS: Fix missing include of list.h in sysfs.h Sysfs.h uses definitions (e.g. struct list_head s_sibling) from list.h but does not include it. Signed-off-by: Frank Haverkamp Signed-off-by: Greg Kroah-Hartman --- include/linux/sysfs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 2129d1b6c87..eee485957c0 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -11,6 +11,7 @@ #define _SYSFS_H_ #include +#include #include struct kobject; -- cgit v1.2.3 From f9f852df2faf76a2667949ddb4947d4b8f99f02f Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 7 Oct 2006 21:54:55 +0200 Subject: Driver core: add device_type to struct device This allows us to add type specific attributes, uevent vars and release funtions. A subsystem can carry different types of devices like the "block" subsys has disks and partitions. Both types create a different set of attributes, but belong to the same subsystem. This corresponds to the low level objects: kobject -> device (object/device data) kobj_type -> device_type (type of object/device we are embedded in) kset -> class/bus (list of objects/devices of a subsystem) Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index da722191311..e1e164f81ee 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -328,6 +328,13 @@ extern struct class_device *class_device_create(struct class *cls, __attribute__((format(printf,5,6))); extern void class_device_destroy(struct class *cls, dev_t devt); +struct device_type { + struct device_attribute *attrs; + int (*uevent)(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size); + void (*release)(struct device *dev); +}; + /* interface for exporting device attributes */ struct device_attribute { struct attribute attr; @@ -356,6 +363,7 @@ struct device { struct kobject kobj; char bus_id[BUS_ID_SIZE]; /* position on parent bus */ + struct device_type *type; unsigned is_registered:1; struct device_attribute uevent_attr; struct device_attribute *devt_attr; -- cgit v1.2.3 From b7a3e813fb84624166f034e25234f98de5846bfc Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 7 Oct 2006 21:54:55 +0200 Subject: Driver core: allow to delay the uevent at device creation time For the block subsystem, we want to delay all uevents until the disk has been scanned and allpartitons are already created before the first event is sent out. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index e1e164f81ee..5ca1cdba563 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -399,9 +399,10 @@ struct device { /* class_device migration path */ struct list_head node; - struct class *class; /* optional*/ + struct class *class; dev_t devt; /* dev_t, creates the sysfs "dev" */ struct attribute_group **groups; /* optional groups */ + int uevent_suppress; void (*release)(struct device * dev); }; -- cgit v1.2.3 From b592fcfe7f06c15ec11774b5be7ce0de3aa86e73 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 24 Jan 2007 12:35:52 -0700 Subject: sysfs: Shadow directory support The problem. When implementing a network namespace I need to be able to have multiple network devices with the same name. Currently this is a problem for /sys/class/net/*. What I want is a separate /sys/class/net directory in sysfs for each network namespace, and I want to name each of them /sys/class/net. I looked and the VFS actually allows that. All that is needed is for /sys/class/net to implement a follow link method to redirect lookups to the real directory you want. Implementing a follow link method that is sensitive to the current network namespace turns out to be 3 lines of code so it looks like a clean approach. Modifying sysfs so it doesn't get in my was is a bit trickier. I am calling the concept of multiple directories all at the same path in the filesystem shadow directories. With the directory entry really at that location the shadow master. The following patch modifies sysfs so it can handle a directory structure slightly different from the kobject tree so I can implement the shadow directories for handling /sys/class/net/. Signed-off-by: Eric W. Biederman Cc: Maneesh Soni Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 4 ++++ include/linux/sysfs.h | 23 +++++++++++++++++++---- 2 files changed, 23 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 76538fcf2c4..b850e031053 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -74,9 +74,13 @@ extern void kobject_init(struct kobject *); extern void kobject_cleanup(struct kobject *); extern int __must_check kobject_add(struct kobject *); +extern int __must_check kobject_shadow_add(struct kobject *, struct dentry *); extern void kobject_del(struct kobject *); extern int __must_check kobject_rename(struct kobject *, const char *new_name); +extern int __must_check kobject_shadow_rename(struct kobject *kobj, + struct dentry *new_parent, + const char *new_name); extern int __must_check kobject_move(struct kobject *, struct kobject *); extern int __must_check kobject_register(struct kobject *); diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index eee485957c0..192de3afa96 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -16,6 +16,7 @@ struct kobject; struct module; +struct nameidata; struct attribute { const char * name; @@ -89,13 +90,13 @@ struct sysfs_dirent { #ifdef CONFIG_SYSFS extern int __must_check -sysfs_create_dir(struct kobject *); +sysfs_create_dir(struct kobject *, struct dentry *); extern void sysfs_remove_dir(struct kobject *); extern int __must_check -sysfs_rename_dir(struct kobject *, const char *new_name); +sysfs_rename_dir(struct kobject *, struct dentry *, const char *new_name); extern int __must_check sysfs_move_dir(struct kobject *, struct kobject *); @@ -127,11 +128,17 @@ int __must_check sysfs_create_group(struct kobject *, void sysfs_remove_group(struct kobject *, const struct attribute_group *); void sysfs_notify(struct kobject * k, char *dir, char *attr); + +extern int sysfs_make_shadowed_dir(struct kobject *kobj, + void * (*follow_link)(struct dentry *, struct nameidata *)); +extern struct dentry *sysfs_create_shadow_dir(struct kobject *kobj); +extern void sysfs_remove_shadow_dir(struct dentry *dir); + extern int __must_check sysfs_init(void); #else /* CONFIG_SYSFS */ -static inline int sysfs_create_dir(struct kobject * k) +static inline int sysfs_create_dir(struct kobject * k, struct dentry *shadow) { return 0; } @@ -141,7 +148,9 @@ static inline void sysfs_remove_dir(struct kobject * k) ; } -static inline int sysfs_rename_dir(struct kobject * k, const char *new_name) +static inline int sysfs_rename_dir(struct kobject * k, + struct dentry *new_parent, + const char *new_name) { return 0; } @@ -205,6 +214,12 @@ static inline void sysfs_notify(struct kobject * k, char *dir, char *attr) { } +static inline int sysfs_make_shadowed_dir(struct kobject *kobj, + void * (*follow_link)(struct dentry *, struct nameidata *)) +{ + return 0; +} + static inline int __must_check sysfs_init(void) { return 0; -- cgit v1.2.3 From 7bc3d635628db100c024aca7f836a18188e9bb62 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 19 Jun 2006 23:59:31 -0700 Subject: USB: move usb_device_class class devices to be real devices This moves the usb class devices that control the usbfs nodes to show up in the proper place in the larger device tree. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index aab5b1b7202..f18ced00192 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -372,7 +372,7 @@ struct usb_device { char *serial; /* iSerialNumber string, if present */ struct list_head filelist; - struct class_device *class_dev; + struct device *usbfs_dev; struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ /* -- cgit v1.2.3 From 0873c76485c126a4df70a6961fd354b21b7987f7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 20 Jun 2006 13:09:50 -0700 Subject: USB: convert usb class devices to real devices Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index f18ced00192..d6bf1297d88 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -107,7 +107,8 @@ enum usb_interface_condition { * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. * @dev: driver model's view of this device - * @class_dev: driver model's class view of this device. + * @usb_dev: if an interface is bound to the USB major, this will point + * to the sysfs representation for that device. * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not * allowed unless the counter is 0. * @@ -152,7 +153,7 @@ struct usb_interface { unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ struct device dev; /* interface specific device info */ - struct class_device *class_dev; + struct device *usb_dev; /* pointer to the usb class's device, if any */ int pm_usage_cnt; /* usage counter for autosuspend */ }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev) -- cgit v1.2.3 From 5f848137744106ee737f559454ce5adfceb38347 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 16 Dec 2006 15:34:53 -0800 Subject: USB: becomes This moves to to reduce some of the clutter of usb header files. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/Kbuild | 2 +- include/linux/usb.h | 2 +- include/linux/usb/Kbuild | 5 + include/linux/usb/ch9.h | 562 +++++++++++++++++++++++++++++++++++++++++++ include/linux/usb_ch9.h | 562 ------------------------------------------- include/linux/usb_gadgetfs.h | 2 +- 6 files changed, 570 insertions(+), 565 deletions(-) create mode 100644 include/linux/usb/Kbuild create mode 100644 include/linux/usb/ch9.h delete mode 100644 include/linux/usb_ch9.h (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 157db77a717..683513e310d 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -11,6 +11,7 @@ header-y += netfilter_arp/ header-y += netfilter_bridge/ header-y += netfilter_ipv4/ header-y += netfilter_ipv6/ +header-y += usb/ header-y += affs_hardblocks.h header-y += aio_abi.h @@ -326,7 +327,6 @@ unifdef-y += udp.h unifdef-y += uinput.h unifdef-y += uio.h unifdef-y += unistd.h -unifdef-y += usb_ch9.h unifdef-y += usbdevice_fs.h unifdef-y += user.h unifdef-y += utsname.h diff --git a/include/linux/usb.h b/include/linux/usb.h index d6bf1297d88..f3b21636c9d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -2,7 +2,7 @@ #define __LINUX_USB_H #include -#include +#include #define USB_MAJOR 180 #define USB_DEVICE_MAJOR 189 diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild new file mode 100644 index 00000000000..43f160cfe00 --- /dev/null +++ b/include/linux/usb/Kbuild @@ -0,0 +1,5 @@ +unifdef-y += audio.h +unifdef-y += cdc.h +unifdef-y += ch9.h +unifdef-y += midi.h + diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h new file mode 100644 index 00000000000..c720d107ff2 --- /dev/null +++ b/include/linux/usb/ch9.h @@ -0,0 +1,562 @@ +/* + * This file holds USB constants and structures that are needed for USB + * device APIs. These are used by the USB device model, which is defined + * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C + * that need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - the Linux "gadget" slave/device/peripheral side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs benefit from working well together. + * + * There's also "Wireless USB", using low power short range radios for + * peripheral interconnection but otherwise building on the USB framework. + */ + +#ifndef __LINUX_USB_CH9_H +#define __LINUX_USB_CH9_H + +#include /* __u8 etc */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". But when exposed through Linux-USB APIs, + * they've been converted to cpu byte order. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b +/* these are from the Wireless USB spec */ +#define USB_DT_SECURITY 0x0c +#define USB_DT_KEY 0x0d +#define USB_DT_ENCRYPTION_TYPE 0x0e +#define USB_DT_BOS 0x0f +#define USB_DT_DEVICE_CAPABILITY 0x10 +#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 + +/* conventional codes for class-specific descriptors */ +#define USB_DT_CS_DEVICE 0x21 +#define USB_DT_CS_CONFIG 0x22 +#define USB_DT_CS_STRING 0x23 +#define USB_DT_CS_INTERFACE 0x24 +#define USB_DT_CS_ENDPOINT 0x25 + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ +#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + /* NOTE: these two are _only_ in audio endpoints. */ + /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 +#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SECURITY: group of wireless security descriptors, including + * encryption types available for setting up a CC/association. + */ +struct usb_security_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumEncryptionTypes; +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys + * may be retrieved. + */ +struct usb_key_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 tTKID[3]; + __u8 bReserved; + __u8 bKeyData[0]; +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ +struct usb_encryption_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEncryptionType; +#define USB_ENC_TYPE_UNSECURE 0 +#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ +#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ +#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ + __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ + __u8 bAuthKeyIndex; +}; + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_BOS: group of wireless capabilities */ +struct usb_bos_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumDeviceCaps; +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ +struct usb_dev_cap_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +}; + +#define USB_CAP_TYPE_WIRELESS_USB 1 + +struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + + __u8 bmAttributes; +#define USB_WIRELESS_P2P_DRD (1 << 1) +#define USB_WIRELESS_BEACON_MASK (3 << 2) +#define USB_WIRELESS_BEACON_SELF (1 << 2) +#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) +#define USB_WIRELESS_BEACON_NONE (3 << 2) + __le16 wPHYRates; /* bit rates, Mbps */ +#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ +#define USB_WIRELESS_PHY_80 (1 << 1) +#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ +#define USB_WIRELESS_PHY_160 (1 << 3) +#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ +#define USB_WIRELESS_PHY_320 (1 << 5) +#define USB_WIRELESS_PHY_400 (1 << 6) +#define USB_WIRELESS_PHY_480 (1 << 7) + __u8 bmTFITXPowerInfo; /* TFI power levels */ + __u8 bmFFITXPowerInfo; /* FFI power levels */ + __le16 bmBandGroup; + __u8 bReserved; +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with + * each endpoint descriptor for a wireless device + */ +struct usb_wireless_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bMaxSequence; + __le16 wMaxStreamDelay; + __le16 wOverTheAirPacketSize; + __u8 bOverTheAirInterval; + __u8 bmCompAttributes; +#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ +#define USB_ENDPOINT_SWITCH_NO 0 +#define USB_ENDPOINT_SWITCH_SWITCH 1 +#define USB_ENDPOINT_SWITCH_SCALE 2 +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless + * host and a device for connection set up, mutual authentication, and + * exchanging short lived session keys. The handshake depends on a CC. + */ +struct usb_handshake { + __u8 bMessageNumber; + __u8 bStatus; + __u8 tTKID[3]; + __u8 bReserved; + __u8 CDID[16]; + __u8 nonce[16]; + __u8 MIC[8]; +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). + * A CC may also be set up using non-wireless secure channels (including + * wired USB!), and some devices may support CCs with multiple hosts. + */ +struct usb_connection_context { + __u8 CHID[16]; /* persistent host id */ + __u8 CDID[16]; /* device id (unique w/in host context) */ + __u8 CK[16]; /* connection key */ +}; + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH, /* usb 2.0 */ + USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ +}; + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* chapter 9 and authentication (wireless) device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, /* wired */ + USB_STATE_UNAUTHENTICATED, /* auth */ + USB_STATE_RECONNECTING, /* auth */ + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + */ +}; + +#endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h deleted file mode 100644 index c720d107ff2..00000000000 --- a/include/linux/usb_ch9.h +++ /dev/null @@ -1,562 +0,0 @@ -/* - * This file holds USB constants and structures that are needed for USB - * device APIs. These are used by the USB device model, which is defined - * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C - * that need these: - * - * - the master/host side Linux-USB kernel driver API; - * - the "usbfs" user space API; and - * - the Linux "gadget" slave/device/peripheral side driver API. - * - * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems - * act either as a USB master/host or as a USB slave/device. That means - * the master and slave side APIs benefit from working well together. - * - * There's also "Wireless USB", using low power short range radios for - * peripheral interconnection but otherwise building on the USB framework. - */ - -#ifndef __LINUX_USB_CH9_H -#define __LINUX_USB_CH9_H - -#include /* __u8 etc */ - -/*-------------------------------------------------------------------------*/ - -/* CONTROL REQUEST SUPPORT */ - -/* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -/* - * USB types, the second of three bRequestType fields - */ -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* - * USB recipients, the third of three bRequestType fields - */ -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 -/* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 - -/* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C - -#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ -#define USB_REQ_GET_ENCRYPTION 0x0E -#define USB_REQ_RPIPE_ABORT 0x0E -#define USB_REQ_SET_HANDSHAKE 0x0F -#define USB_REQ_RPIPE_RESET 0x0F -#define USB_REQ_GET_HANDSHAKE 0x10 -#define USB_REQ_SET_CONNECTION 0x11 -#define USB_REQ_SET_SECURITY_DATA 0x12 -#define USB_REQ_GET_SECURITY_DATA 0x13 -#define USB_REQ_SET_WUSB_DATA 0x14 -#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 -#define USB_REQ_LOOPBACK_DATA_READ 0x16 -#define USB_REQ_SET_INTERFACE_DS 0x17 - -/* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) - */ -#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ -#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ -#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ -#define USB_DEVICE_BATTERY 2 /* (wireless) */ -#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ -#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ -#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ -#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ -#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - -#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - - -/** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ -struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". But when exposed through Linux-USB APIs, - * they've been converted to cpu byte order. - */ - -/* - * Descriptor types ... USB 2.0 spec table 9.5 - */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_INTERFACE_POWER 0x08 -/* these are from a minor usb 2.0 revision (ECN) */ -#define USB_DT_OTG 0x09 -#define USB_DT_DEBUG 0x0a -#define USB_DT_INTERFACE_ASSOCIATION 0x0b -/* these are from the Wireless USB spec */ -#define USB_DT_SECURITY 0x0c -#define USB_DT_KEY 0x0d -#define USB_DT_ENCRYPTION_TYPE 0x0e -#define USB_DT_BOS 0x0f -#define USB_DT_DEVICE_CAPABILITY 0x10 -#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 -#define USB_DT_WIRE_ADAPTER 0x21 -#define USB_DT_RPIPE 0x22 - -/* conventional codes for class-specific descriptors */ -#define USB_DT_CS_DEVICE 0x21 -#define USB_DT_CS_CONFIG 0x22 -#define USB_DT_CS_STRING 0x23 -#define USB_DT_CS_INTERFACE 0x24 -#define USB_DT_CS_ENDPOINT 0x25 - -/* All standard descriptors have these 2 fields at the beginning */ -struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE: Device descriptor */ -struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __le16 idVendor; - __le16 idProduct; - __le16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; -} __attribute__ ((packed)); - -#define USB_DT_DEVICE_SIZE 18 - - -/* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_CDC_DATA 0x0a -#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ -#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ -#define USB_CLASS_VIDEO 0x0e -#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 -#define USB_CLASS_APP_SPEC 0xfe -#define USB_CLASS_VENDOR_SPEC 0xff - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ -struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; -} __attribute__ ((packed)); - -#define USB_DT_CONFIG_SIZE 9 - -/* from config descriptor bmAttributes */ -#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ -#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ -#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ -#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_STRING: String descriptor */ -struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wData[1]; /* UTF-16LE encoded */ -} __attribute__ ((packed)); - -/* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE: Interface descriptor */ -struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; -} __attribute__ ((packed)); - -#define USB_DT_INTERFACE_SIZE 9 - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENDPOINT: Endpoint descriptor */ -struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; - - /* NOTE: these two are _only_ in audio endpoints. */ - /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ - __u8 bRefresh; - __u8 bSynchAddress; -} __attribute__ ((packed)); - -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - -/* - * Endpoints - */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ -struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_OTG (from OTG 1.0a supplement) */ -struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ -} __attribute__ ((packed)); - -/* from usb_otg_descriptor.bmAttributes */ -#define USB_OTG_SRP (1 << 0) -#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ -struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; -}; - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ -struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SECURITY: group of wireless security descriptors, including - * encryption types available for setting up a CC/association. - */ -struct usb_security_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumEncryptionTypes; -}; - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys - * may be retrieved. - */ -struct usb_key_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 tTKID[3]; - __u8 bReserved; - __u8 bKeyData[0]; -}; - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ -struct usb_encryption_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEncryptionType; -#define USB_ENC_TYPE_UNSECURE 0 -#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ -#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ -#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ - __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ - __u8 bAuthKeyIndex; -}; - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_BOS: group of wireless capabilities */ -struct usb_bos_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumDeviceCaps; -}; - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ -struct usb_dev_cap_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; -}; - -#define USB_CAP_TYPE_WIRELESS_USB 1 - -struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - - __u8 bmAttributes; -#define USB_WIRELESS_P2P_DRD (1 << 1) -#define USB_WIRELESS_BEACON_MASK (3 << 2) -#define USB_WIRELESS_BEACON_SELF (1 << 2) -#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) -#define USB_WIRELESS_BEACON_NONE (3 << 2) - __le16 wPHYRates; /* bit rates, Mbps */ -#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ -#define USB_WIRELESS_PHY_80 (1 << 1) -#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ -#define USB_WIRELESS_PHY_160 (1 << 3) -#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ -#define USB_WIRELESS_PHY_320 (1 << 5) -#define USB_WIRELESS_PHY_400 (1 << 6) -#define USB_WIRELESS_PHY_480 (1 << 7) - __u8 bmTFITXPowerInfo; /* TFI power levels */ - __u8 bmFFITXPowerInfo; /* FFI power levels */ - __le16 bmBandGroup; - __u8 bReserved; -}; - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with - * each endpoint descriptor for a wireless device - */ -struct usb_wireless_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bMaxSequence; - __le16 wMaxStreamDelay; - __le16 wOverTheAirPacketSize; - __u8 bOverTheAirInterval; - __u8 bmCompAttributes; -#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ -#define USB_ENDPOINT_SWITCH_NO 0 -#define USB_ENDPOINT_SWITCH_SWITCH 1 -#define USB_ENDPOINT_SWITCH_SCALE 2 -}; - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless - * host and a device for connection set up, mutual authentication, and - * exchanging short lived session keys. The handshake depends on a CC. - */ -struct usb_handshake { - __u8 bMessageNumber; - __u8 bStatus; - __u8 tTKID[3]; - __u8 bReserved; - __u8 CDID[16]; - __u8 nonce[16]; - __u8 MIC[8]; -}; - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). - * A CC may also be set up using non-wireless secure channels (including - * wired USB!), and some devices may support CCs with multiple hosts. - */ -struct usb_connection_context { - __u8 CHID[16]; /* persistent host id */ - __u8 CDID[16]; /* device id (unique w/in host context) */ - __u8 CK[16]; /* connection key */ -}; - -/*-------------------------------------------------------------------------*/ - -/* USB 2.0 defines three speeds, here's how Linux identifies them */ - -enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ -}; - -enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* chapter 9 and authentication (wireless) device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, /* wired */ - USB_STATE_UNAUTHENTICATED, /* auth */ - USB_STATE_RECONNECTING, /* auth */ - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - */ -}; - -#endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb_gadgetfs.h b/include/linux/usb_gadgetfs.h index b53d6ae8e55..8086d5a9b94 100644 --- a/include/linux/usb_gadgetfs.h +++ b/include/linux/usb_gadgetfs.h @@ -2,7 +2,7 @@ #include #include -#include +#include /* * Filesystem based user-mode API to USB Gadget controller hardware -- cgit v1.2.3 From e7d8712c15e087ba6201e5988d618ee03dfe693c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 12 Dec 2006 15:12:30 -0800 Subject: USB: define USB_CLASS_MISC in Add USB_CLASS_MISC to Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index c720d107ff2..ae7833749fa 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -224,6 +224,7 @@ struct usb_device_descriptor { #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ #define USB_CLASS_VIDEO 0x0e #define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_MISC 0xef #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff -- cgit v1.2.3 From 93bacefc4cc0b53e1cb6a336d43847154fdf6886 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 17 Dec 2006 21:50:23 +0100 Subject: USB serial: add dynamic id support to usb-serial core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Thanks to Johannes Hölzl for fixing a few things and getting it all working properly. This adds support for dynamic usb ids to the usb serial core. The file "new_id" will show up under the usb serial driver, not the usb driver associated with the usb-serial driver (yeah, it can be a bit confusing at first glance...) This patch also modifies the USB core to allow the usb-serial core to reuse much of the dynamic id logic. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Johannes Hölzl --- include/linux/usb.h | 12 ++++++++++++ include/linux/usb/serial.h | 5 +++++ 2 files changed, 17 insertions(+) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index f3b21636c9d..3cb9285df2d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -476,6 +476,8 @@ extern void usb_driver_release_interface(struct usb_driver *driver, struct usb_interface *iface); const struct usb_device_id *usb_match_id(struct usb_interface *interface, const struct usb_device_id *id); +extern int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id); extern struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor); @@ -724,11 +726,21 @@ static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor /* ----------------------------------------------------------------------- */ +/* Stuff for dynamic usb ids */ struct usb_dynids { spinlock_t lock; struct list_head list; }; +struct usb_dynid { + struct list_head node; + struct usb_device_id id; +}; + +extern ssize_t usb_store_new_id(struct usb_dynids *dynids, + struct device_driver *driver, + const char *buf, size_t count); + /** * struct usbdrv_wrap - wrapper for driver-model structure * @driver: The driver-model core driver structure. diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 10f99e5f1a9..33dcd857669 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -179,6 +179,9 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * memory structure allocation at this point in time. * @shutdown: pointer to the driver's shutdown function. This will be * called when the device is removed from the system. + * @usb_driver: pointer to the struct usb_driver that controls this + * device. This is necessary to allow dynamic ids to be added to + * the driver from sysfs. * * This structure is defines a USB Serial driver. It provides all of * the information that the USB serial core code needs. If the function @@ -202,6 +205,8 @@ struct usb_serial_driver { struct list_head driver_list; struct device_driver driver; + struct usb_driver *usb_driver; + struct usb_dynids dynids; int (*probe) (struct usb_serial *serial, const struct usb_device_id *id); int (*attach) (struct usb_serial *serial); -- cgit v1.2.3 From a8ef36bc0a5fe973bddaa54a5a07cda29e04a602 Mon Sep 17 00:00:00 2001 From: Sarah Bailey Date: Sat, 23 Dec 2006 23:14:58 -0800 Subject: USB: Add usb_endpoint_xfer_control to usb.h Added a function to check if an endpoint is a control endpoint. There were similar functions for bulk, interrupt, and isoc, but not for control endpoints. Signed-off-by: Sarah Bailey Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index 3cb9285df2d..1c56386de70 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -556,6 +556,18 @@ static inline int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *e USB_ENDPOINT_XFER_BULK); } +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + /** * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type * @epd: endpoint to be checked -- cgit v1.2.3 From 4a1a4d8b87389e35c3af04c0d0a95f6a0391b964 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Mon, 15 Jan 2007 20:11:52 -0800 Subject: USB: ps3 controller hid quirk Add the USB HID quirk HID_QUIRK_SONY_PS3_CONTROLLER. This sends an HID_REQ_GET_REPORT to the the PS3 controller to put the device into 'operational mode'. Signed-off-by: Geoff Levand Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/hid.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/hid.h b/include/linux/hid.h index 93173fe4563..d26b08f461f 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -266,6 +266,7 @@ struct hid_item { #define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000 #define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00020000 #define HID_QUIRK_IGNORE_MOUSE 0x00040000 +#define HID_QUIRK_SONY_PS3_CONTROLLER 0x00080000 /* * This is the global environment of the parser. This information is -- cgit v1.2.3 From 896fbd7199035958013d106329843d8ae9618753 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 16 Jan 2007 11:57:13 -0500 Subject: usbcore: remove unused bandwith-related code This patch (as841) removes from usbcore a couple of support routines meant to help with bandwidth allocation. With the changes to uhci-hcd in the previous patch, these routines are no longer used anywhere. Also removed is the CONFIG_USB_BANDWIDTH option; it no longer does anything and is no longer needed since the HCDs now handle bandwidth issues correctly. Signed-off-by: Alan Stern Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/usb.h b/include/linux/usb.h index 1c56386de70..3b08ab39550 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1110,7 +1110,6 @@ struct urb struct kref kref; /* reference count of the URB */ spinlock_t lock; /* lock for the URB */ void *hcpriv; /* private data for host controller */ - int bandwidth; /* bandwidth for INT/ISO request */ atomic_t use_count; /* concurrent submissions counter */ u8 reject; /* submissions will fail */ -- cgit v1.2.3 From c87deff776feacd05a7411097e8c8c57e549e638 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Mon, 18 Dec 2006 10:31:06 +0900 Subject: PCI : Add selected_regions funcs This patch adds the following changes into generic PCI code especially for PCI legacy I/O port free drivers. - Added new pci_request_selected_regions() and pci_release_selected_regions() for PCI legacy I/O port free drivers in order to request/release only the selected regions. - Added helper routine pci_select_bars() which makes proper mask of BARs from the specified resource type. This would be very helpful for users of pci_enable_device_bars(). Signed-off-by: Kenji Kaneshige Signed-off-by: Hidetoshi Seto Cc: Inaky Perez-Gonzalez Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index f3c617eabd8..df875626b71 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -533,6 +533,7 @@ void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); int __must_check pci_assign_resource_fixed(struct pci_dev *dev, int i); void pci_restore_bars(struct pci_dev *dev); +int pci_select_bars(struct pci_dev *dev, unsigned long flags); /* ROM control related routines */ void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size); @@ -561,6 +562,8 @@ int __must_check pci_request_regions(struct pci_dev *, const char *); void pci_release_regions(struct pci_dev *); int __must_check pci_request_region(struct pci_dev *, int, const char *); void pci_release_region(struct pci_dev *, int); +int pci_request_selected_regions(struct pci_dev *, int, const char *); +void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, -- cgit v1.2.3 From a7369f1f6533b9efc3209d1df103537bbbf24b8c Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Tue, 12 Dec 2006 16:55:59 -0600 Subject: PCI: define inline for test of channel error state Add very simple routine to indicate the pci channel error state. Signed-off-by: Linas Vepstas Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index df875626b71..79856b3c714 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -181,6 +181,11 @@ struct pci_dev { #define to_pci_dev(n) container_of(n, struct pci_dev, dev) #define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL) +static inline int pci_channel_offline(struct pci_dev *pdev) +{ + return (pdev->error_state != pci_channel_io_normal); +} + static inline struct pci_cap_saved_state *pci_find_saved_cap( struct pci_dev *pci_dev,char cap) { -- cgit v1.2.3 From fd9b37cc4e32533214f77b34ea03ee85f6e0a4d2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 17 Nov 2006 15:21:45 +0100 Subject: PCI: remove pci_find_device_reverse() This patch removes the no longer used pci_find_device_reverse(). Signed-off-by: Adrian Bunk Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 79856b3c714..23d2a37f3c9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -469,7 +469,6 @@ extern void pci_sort_breadthfirst(void); /* Generic PCI functions exported to card drivers */ struct pci_dev *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from); -struct pci_dev *pci_find_device_reverse (unsigned int vendor, unsigned int device, const struct pci_dev *from); struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn); int pci_find_capability (struct pci_dev *dev, int cap); int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap); -- cgit v1.2.3 From 429538ad3eeffec4199d8adddd1e9e4c80b2c08b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 18 Nov 2006 01:06:29 +0100 Subject: PCI: mark pci_find_device() as __deprecated On Fri, Nov 17, 2006 at 09:32:36AM -0500, Alan Cox wrote: > > Soon we should deprecate pci_find_device as well So let's mark it as __deprecated now, which also has the side effect that noone can later whine that removing it might break some shiny external modules. Oh, and if anything starts complaining "But this adds some warnings to my kernel build!", he should either first fix the 200 kB (sic) of warnings I'm getting in 2.6.19-rc5-mm2 starting at MODPOST or go to hell. Signed-off-by: Adrian Bunk Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 23d2a37f3c9..cf2c8a35a1d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -468,7 +468,7 @@ extern void pci_sort_breadthfirst(void); /* Generic PCI functions exported to card drivers */ -struct pci_dev *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from); +struct pci_dev __deprecated *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from); struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn); int pci_find_capability (struct pci_dev *dev, int cap); int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap); -- cgit v1.2.3 From 8255cf35d503db7c1b26ae53b6b7f23ada82316f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 6 Jan 2007 21:48:41 +0100 Subject: PCI: make isa_bridge Alpha-only Since isa_bridge is neither assigned any value !NULL nor used on !Alpha, there's no reason for providing it. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- include/asm-alpha/pci.h | 2 ++ include/linux/pci.h | 6 ------ 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h index 4e115f368d5..85aa1127c90 100644 --- a/include/asm-alpha/pci.h +++ b/include/asm-alpha/pci.h @@ -293,4 +293,6 @@ struct pci_dev *alpha_gendev_to_pci(struct device *dev); #define IOBASE_ROOT_BUS 5 #define IOBASE_FROM_HOSE 0x10000 +extern struct pci_dev *isa_bridge; + #endif /* __ALPHA_PCI_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index cf2c8a35a1d..d69dfd7d0e0 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -618,10 +618,6 @@ enum pci_dma_burst_strategy { strategy_parameter byte boundaries */ }; -#if defined(CONFIG_ISA) || defined(CONFIG_EISA) -extern struct pci_dev *isa_bridge; -#endif - struct msix_entry { u16 vector; /* kernel uses to write allocated vector */ u16 entry; /* driver uses to specify entry, OS writes */ @@ -729,8 +725,6 @@ static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { static inline pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) { return PCI_D0; } static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { return 0; } -#define isa_bridge ((struct pci_dev *)NULL) - #define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0) static inline void pci_block_user_cfg_access(struct pci_dev *dev) { } -- cgit v1.2.3 From c54c18790700b8b2a503945d729aa425c25691fe Mon Sep 17 00:00:00 2001 From: Satoru Takeuchi Date: Thu, 18 Jan 2007 13:50:05 +0900 Subject: PCI: cleanup MSI code Cleanup MSI code as follows: - fix some types - fix strange local variable definition - delete unnecessary blank line - add comment to #endif which is far from corresponding #ifdef Signed-off-by: Satoru Takeuchi Signed-off-by: Greg Kroah-Hartman --- include/linux/msi.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/msi.h b/include/linux/msi.h index c7ef9434367..b99976b1536 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -7,11 +7,10 @@ struct msi_msg { u32 data; /* 16 bits of msi message data */ }; -/* Heper functions */ +/* Helper functions */ extern void mask_msi_irq(unsigned int irq); extern void unmask_msi_irq(unsigned int irq); extern void read_msi_msg(unsigned int irq, struct msi_msg *msg); - extern void write_msi_msg(unsigned int irq, struct msi_msg *msg); struct msi_desc { -- cgit v1.2.3 From 0fcfdabbdbedb3bdc63f29209aeeac805df78a92 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 25 Jan 2007 19:34:08 +1100 Subject: MSI: Remove pci_scan_msi_device() pci_scan_msi_device() doesn't do anything anymore, so remove it. Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index d69dfd7d0e0..29765e2b1e0 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -625,7 +625,6 @@ struct msix_entry { #ifndef CONFIG_PCI_MSI -static inline void pci_scan_msi_device(struct pci_dev *dev) {} static inline int pci_enable_msi(struct pci_dev *dev) {return -1;} static inline void pci_disable_msi(struct pci_dev *dev) {} static inline int pci_enable_msix(struct pci_dev* dev, @@ -633,7 +632,6 @@ static inline int pci_enable_msix(struct pci_dev* dev, static inline void pci_disable_msix(struct pci_dev *dev) {} static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev) {} #else -extern void pci_scan_msi_device(struct pci_dev *dev); extern int pci_enable_msi(struct pci_dev *dev); extern void pci_disable_msi(struct pci_dev *dev); extern int pci_enable_msix(struct pci_dev* dev, -- cgit v1.2.3 From ded86d8d37736df67ddeec4ae00e2ec1a5a90b3c Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 28 Jan 2007 12:42:52 -0700 Subject: msi: Kill msi_lookup_irq The function msi_lookup_irq was horrible. As a side effect of running it changed dev->irq, and then the callers would need to change it back. In addition it does a global scan through all of the irqs, which seems to be the sole justification of the msi_lock. To remove the neede for msi_lookup_irq I added first_msi_irq to struct pci_dev. Then depending on the context I replaced msi_lookup_irq with dev->first_msi_irq, dev->msi_enabled, or dev->msix_enabled. msi_enabled and msix_enabled were already present in pci_dev for other reasons. Signed-off-by: Eric W. Biederman Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 29765e2b1e0..1507f8cc45f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -174,6 +174,9 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ +#ifdef CONFIG_PCI_MSI + unsigned int first_msi_irq; +#endif }; #define pci_dev_g(n) list_entry(n, struct pci_dev, global_list) -- cgit v1.2.3 From 5b912c108c8b1fcecbfe13d6d9a183db97b682d3 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 28 Jan 2007 12:52:03 -0700 Subject: msi: Kill the msi_desc array. We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: Eric W. Biederman Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- include/linux/irq.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/irq.h b/include/linux/irq.h index 52fc4052a0a..5504b671357 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -68,6 +68,7 @@ typedef void fastcall (*irq_flow_handler_t)(unsigned int irq, #define IRQ_MOVE_PENDING 0x40000000 /* need to re-target IRQ destination */ struct proc_dir_entry; +struct msi_desc; /** * struct irq_chip - hardware interrupt chip descriptor @@ -148,6 +149,7 @@ struct irq_chip { struct irq_desc { irq_flow_handler_t handle_irq; struct irq_chip *chip; + struct msi_desc *msi_desc; void *handler_data; void *chip_data; struct irqaction *action; /* IRQ action list */ @@ -373,10 +375,12 @@ extern int set_irq_chip(unsigned int irq, struct irq_chip *chip); extern int set_irq_data(unsigned int irq, void *data); extern int set_irq_chip_data(unsigned int irq, void *data); extern int set_irq_type(unsigned int irq, unsigned int type); +extern int set_irq_msi(unsigned int irq, struct msi_desc *entry); #define get_irq_chip(irq) (irq_desc[irq].chip) #define get_irq_chip_data(irq) (irq_desc[irq].chip_data) #define get_irq_data(irq) (irq_desc[irq].handler_data) +#define get_irq_msi(irq) (irq_desc[irq].msi_desc) #endif /* CONFIG_GENERIC_HARDIRQS */ -- cgit v1.2.3 From f7feaca77d6ad6bcfcc88ac54e3188970448d6fe Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 28 Jan 2007 12:56:37 -0700 Subject: msi: Make MSI useable more architectures The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now responsible for allocating and freeing the linux irq in addition to setting up the the linux irq to work with the interrupt. arch_setup_msi_irq now takes a pci_device and a msi_desc and returns an irq. With this change in place this code should be useable by all platforms except those that won't let the OS touch the hardware like ppc RTAS. Signed-off-by: Eric W. Biederman Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- include/asm-ia64/machvec.h | 3 ++- include/linux/msi.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h index a3891eb3f21..3c96ac19154 100644 --- a/include/asm-ia64/machvec.h +++ b/include/asm-ia64/machvec.h @@ -21,6 +21,7 @@ struct mm_struct; struct pci_bus; struct task_struct; struct pci_dev; +struct msi_desc; typedef void ia64_mv_setup_t (char **); typedef void ia64_mv_cpu_init_t (void); @@ -79,7 +80,7 @@ typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *); typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *); typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *); -typedef int ia64_mv_setup_msi_irq_t (unsigned int irq, struct pci_dev *pdev); +typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *); typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq); static inline void diff --git a/include/linux/msi.h b/include/linux/msi.h index b99976b1536..74c8a2ecc9d 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -41,7 +41,7 @@ struct msi_desc { /* * The arch hook for setup up msi irqs */ -int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev); +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc); void arch_teardown_msi_irq(unsigned int irq); -- cgit v1.2.3 From 12e86f92fcfe4f0bcab0ad7fa4088a64c60d9b38 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 8 Feb 2007 15:02:35 +1100 Subject: [POWERPC] Only use H_BULK_REMOVE if the firmware supports it The previous patch changing pSeries to use H_BULK_REMOVE broke the JS20 blade, where the firmware doesn't support H_BULK_REMOVE. This adds a firmware check so that on machines that don't have H_BULK_REMOVE, we just use the H_REMOVE call as before. Signed-off-by: Paul Mackerras --- include/asm-powerpc/firmware.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index abba808cc53..3671c128f27 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -44,6 +44,7 @@ #define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) #define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) #define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000) +#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000) #ifndef __ASSEMBLY__ -- cgit v1.2.3 From f42963f8646540ac7e5ba016a0ec1cc2e7386b57 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 12 Dec 2006 15:13:19 -0700 Subject: [POWERPC] Add mpc52xx/lite5200 PCI support Signed-off-by: Grant Likely Acked-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- include/asm-powerpc/mpc52xx.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h index 4560d72fc75..7afd5bf9452 100644 --- a/include/asm-powerpc/mpc52xx.h +++ b/include/asm-powerpc/mpc52xx.h @@ -249,6 +249,8 @@ extern void mpc52xx_declare_of_platform_devices(void); extern void mpc52xx_init_irq(void); extern unsigned int mpc52xx_get_irq(void); +extern int __init mpc52xx_add_bridge(struct device_node *node); + #endif /* __ASSEMBLY__ */ #endif /* __ASM_POWERPC_MPC52xx_H__ */ -- cgit v1.2.3 From 07b2463046247ce580ff9b37e91394f2f6424768 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 7 Feb 2007 21:34:08 -0800 Subject: Revert "Driver core: convert SPI code to use struct device" This reverts commit 2943ecf2ed32632473c06f1975db47a7aa98c10f. This should go through the SPI maintainer, it was my fault that it did not. Especially as it conflicts with other patches he has pending. Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 8c2edd82a07..176f6e36dbf 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -170,7 +170,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * message's completion function when the transaction completes. */ struct spi_master { - struct device dev; + struct class_device cdev; /* other than negative (== assign one dynamically), bus_num is fully * board-specific. usually that simplifies to being SOC-specific. @@ -216,17 +216,17 @@ struct spi_master { static inline void *spi_master_get_devdata(struct spi_master *master) { - return dev_get_drvdata(&master->dev); + return class_get_devdata(&master->cdev); } static inline void spi_master_set_devdata(struct spi_master *master, void *data) { - dev_set_drvdata(&master->dev, data); + class_set_devdata(&master->cdev, data); } static inline struct spi_master *spi_master_get(struct spi_master *master) { - if (!master || !get_device(&master->dev)) + if (!master || !class_device_get(&master->cdev)) return NULL; return master; } @@ -234,7 +234,7 @@ static inline struct spi_master *spi_master_get(struct spi_master *master) static inline void spi_master_put(struct spi_master *master) { if (master) - put_device(&master->dev); + class_device_put(&master->cdev); } -- cgit v1.2.3 From f3cc28c797604fa1cda4aef3f250f465de54a0ca Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Thu, 8 Feb 2007 10:42:37 -0500 Subject: Add Attansic L1 ethernet driver. This driver is a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel. Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index defdeed2064..920d21e021b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2073,6 +2073,8 @@ #define PCI_VENDOR_ID_PASEMI 0x1959 +#define PCI_VENDOR_ID_ATTANSIC 0x1969 + #define PCI_VENDOR_ID_JMICRON 0x197B #define PCI_DEVICE_ID_JMICRON_JMB360 0x2360 #define PCI_DEVICE_ID_JMICRON_JMB361 0x2361 -- cgit v1.2.3 From dcb71129841e5821c0cbbdd4017a6f202f180108 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=F8gsberg?= Date: Sun, 17 Dec 2006 14:34:09 -0500 Subject: Add PCI class ID for firewire OHCI controllers. Pull this define out of drivers/ieee1394/ohci1394.c and rename to match other PCI class defines. Signed-off-by: Stefan Richter --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3d1d21035de..c0ced96656c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -95,6 +95,7 @@ #define PCI_BASE_CLASS_SERIAL 0x0c #define PCI_CLASS_SERIAL_FIREWIRE 0x0c00 +#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010 #define PCI_CLASS_SERIAL_ACCESS 0x0c01 #define PCI_CLASS_SERIAL_SSA 0x0c02 #define PCI_CLASS_SERIAL_USB 0x0c03 -- cgit v1.2.3 From ba7808eac17360dda459f82222859b0e3879854b Mon Sep 17 00:00:00 2001 From: Frederik Deweerdt Date: Sun, 4 Feb 2007 20:15:27 -0800 Subject: [TCP]: remove tcp header from tcp_v4_check (take #2) The tcphdr struct passed to tcp_v4_check is not used, the following patch removes it from the parameter list. This adds the netfilter modifications missing in the patch I sent for rc3-mm1. Signed-off-by: Frederik Deweerdt Signed-off-by: David S. Miller --- include/net/tcp.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/tcp.h b/include/net/tcp.h index cd8fa0c858a..5c472f255b7 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -802,9 +802,8 @@ static inline void tcp_update_wl(struct tcp_sock *tp, u32 ack, u32 seq) /* * Calculate(/check) TCP checksum */ -static inline __sum16 tcp_v4_check(struct tcphdr *th, int len, - __be32 saddr, __be32 daddr, - __wsum base) +static inline __sum16 tcp_v4_check(int len, __be32 saddr, + __be32 daddr, __wsum base) { return csum_tcpudp_magic(saddr,daddr,len,IPPROTO_TCP,base); } -- cgit v1.2.3 From 8eb9086f21c73b38b5ca27558db4c91d62d0e70b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 8 Feb 2007 02:09:21 -0800 Subject: [IPV4/IPV6]: Always wait for IPSEC SA resolution in socket contexts. Do this even for non-blocking sockets. This avoids the silly -EAGAIN that applications can see now, even for non-blocking sockets in some cases (f.e. connect()). With help from Venkat Tekkirala. Signed-off-by: David S. Miller --- include/net/route.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/route.h b/include/net/route.h index 486e37aff06..1440bdb5a27 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -146,7 +146,8 @@ static inline char rt_tos2priority(u8 tos) static inline int ip_route_connect(struct rtable **rp, __be32 dst, __be32 src, u32 tos, int oif, u8 protocol, - __be16 sport, __be16 dport, struct sock *sk) + __be16 sport, __be16 dport, struct sock *sk, + int flags) { struct flowi fl = { .oif = oif, .nl_u = { .ip4_u = { .daddr = dst, @@ -168,7 +169,7 @@ static inline int ip_route_connect(struct rtable **rp, __be32 dst, *rp = NULL; } security_sk_classify_flow(sk, &fl); - return ip_route_output_flow(rp, &fl, sk, 0); + return ip_route_output_flow(rp, &fl, sk, flags); } static inline int ip_route_newports(struct rtable **rp, u8 protocol, -- cgit v1.2.3 From 8dc4194474159660d7f37c495e3fc3f10d0db8cc Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 4 Feb 2007 23:31:32 -0800 Subject: [PACKET]: Add optional checksum computation for recvmsg This patch is needed to make ISC's DHCP server (and probably other DHCP servers/clients using AF_PACKET) to be able to serve another client on the same Xen host. The problem is that packets between different domains on the same Xen host only have partial checksums. Unfortunately this piece of information is not passed along in AF_PACKET unless you're using the mmap interface. Since dhcpd doesn't support packet-mmap, UDP packets from the same host come out with apparently bogus checksums. This patch adds a mechanism for AF_PACKET recvmsg(2) to return the status along with the packet. It does so by adding a new cmsg that contains this information along with some other relevant data such as the original packet length. I didn't include the time stamp information since there is already a cmsg for that. This patch also changes the mmap code to set the CSUMNOTREADY flag on all packets instead of just outoing packets on cooked sockets. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/if_packet.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h index 99393ef3af3..f3de05c3067 100644 --- a/include/linux/if_packet.h +++ b/include/linux/if_packet.h @@ -41,6 +41,7 @@ struct sockaddr_ll #define PACKET_RX_RING 5 #define PACKET_STATISTICS 6 #define PACKET_COPY_THRESH 7 +#define PACKET_AUXDATA 8 struct tpacket_stats { @@ -48,6 +49,15 @@ struct tpacket_stats unsigned int tp_drops; }; +struct tpacket_auxdata +{ + __u32 tp_status; + __u32 tp_len; + __u32 tp_snaplen; + __u16 tp_mac; + __u16 tp_net; +}; + struct tpacket_hdr { unsigned long tp_status; -- cgit v1.2.3 From 6f74651ae626ec672028587bc700538076dfbefb Mon Sep 17 00:00:00 2001 From: Baruch Even Date: Sun, 4 Feb 2007 23:36:42 -0800 Subject: [TCP]: Seperate DSACK from SACK fast path Move DSACK code outside the SACK fast-path checking code. If the DSACK determined that the information was too old we stayed with a partial cache copied. Most likely this matters very little since the next packet will not be DSACK and we will find it in the cache. but it's still not good form and there is little reason to couple the two checks. Since the SACK receive cache doesn't need the data to be in host order we also remove the ntohl in the checking loop. Signed-off-by: Baruch Even Signed-off-by: David S. Miller --- include/linux/tcp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 3cc70d1a350..29d3089038a 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -316,7 +316,7 @@ struct tcp_sock { struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */ struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/ - struct tcp_sack_block recv_sack_cache[4]; + struct tcp_sack_block_wire recv_sack_cache[4]; /* from STCP, retrans queue hinting */ struct sk_buff* lost_skb_hint; -- cgit v1.2.3 From 97353cb4c05c2edf260e9d1b19a29d3cc0060a09 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 5 Feb 2007 18:07:27 -0800 Subject: [NET] net/wanrouter/wanmain.c: cleanups This patch contains the following cleanups: - make the following needlessly global functions static: - lock_adapter_irq() - unlock_adapter_irq() - #if 0 the following unused global functions: - wanrouter_encapsulate() - wanrouter_type_trans() Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- include/linux/wanrouter.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include') diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index 2cd05013edf..3add87465b1 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -516,9 +516,6 @@ struct wan_device { /* Public functions available for device drivers */ extern int register_wan_device(struct wan_device *wandev); extern int unregister_wan_device(char *name); -__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev); -int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev, - unsigned short type); /* Proc interface functions. These must not be called by the drivers! */ extern int wanrouter_proc_init(void); @@ -527,11 +524,6 @@ extern int wanrouter_proc_add(struct wan_device *wandev); extern int wanrouter_proc_delete(struct wan_device *wandev); extern int wanrouter_ioctl( struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -extern void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags); -extern void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags); - - - /* Public Data */ /* list of registered devices */ extern struct wan_device *wanrouter_router_devlist; -- cgit v1.2.3 From cdca72652adf597f7fef821a27595fd0dd5eea19 Mon Sep 17 00:00:00 2001 From: Miika Komu Date: Tue, 6 Feb 2007 14:24:56 -0800 Subject: [IPSEC]: exporting xfrm_state_afinfo This patch exports xfrm_state_afinfo. Signed-off-by: Miika Komu Signed-off-by: Diego Beltrami Signed-off-by: Kazunori Miyazawa Signed-off-by: David S. Miller --- include/net/xfrm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/xfrm.h b/include/net/xfrm.h index e4765413cf8..bf91d632901 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -252,10 +252,13 @@ struct xfrm_state_afinfo { xfrm_address_t *daddr, xfrm_address_t *saddr); int (*tmpl_sort)(struct xfrm_tmpl **dst, struct xfrm_tmpl **src, int n); int (*state_sort)(struct xfrm_state **dst, struct xfrm_state **src, int n); + int (*output)(struct sk_buff *skb); }; extern int xfrm_state_register_afinfo(struct xfrm_state_afinfo *afinfo); extern int xfrm_state_unregister_afinfo(struct xfrm_state_afinfo *afinfo); +extern struct xfrm_state_afinfo *xfrm_state_get_afinfo(unsigned short family); +extern void xfrm_state_put_afinfo(struct xfrm_state_afinfo *afinfo); extern void xfrm_state_delete_tunnel(struct xfrm_state *x); -- cgit v1.2.3 From 22f8cde5bc336fd19603bb8c4572b33d14f14f87 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 7 Feb 2007 00:09:58 -0800 Subject: [NET]: unregister_netdevice as void There was no real useful information from the unregister_netdevice() return code, the only error occurred in a situation that was a driver bug. So change it to a void function. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2e37f501278..1a528548cd1 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -589,7 +589,7 @@ extern int dev_open(struct net_device *dev); extern int dev_close(struct net_device *dev); extern int dev_queue_xmit(struct sk_buff *skb); extern int register_netdevice(struct net_device *dev); -extern int unregister_netdevice(struct net_device *dev); +extern void unregister_netdevice(struct net_device *dev); extern void free_netdev(struct net_device *dev); extern void synchronize_net(void); extern int register_netdevice_notifier(struct notifier_block *nb); -- cgit v1.2.3 From 6fecd1985116fb08bdee3b9db6719e159fe5e43d Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Wed, 7 Feb 2007 15:05:12 -0800 Subject: [NETFILTER]: Add SANE connection tracking helper This is nf_conntrack_sane, a netfilter connection tracking helper module for the SANE protocol used by the 'saned' daemon to make scanners available via network. The SANE protocol uses separate control & data connections, similar to passive FTP. The helper module is needed to recognize the data connection as RELATED to the control one. Signed-off-by: Michal Schmidt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/nf_conntrack_sane.h | 21 +++++++++++++++++++++ include/net/netfilter/nf_conntrack.h | 2 ++ 2 files changed, 23 insertions(+) create mode 100644 include/linux/netfilter/nf_conntrack_sane.h (limited to 'include') diff --git a/include/linux/netfilter/nf_conntrack_sane.h b/include/linux/netfilter/nf_conntrack_sane.h new file mode 100644 index 00000000000..4767d6e23e9 --- /dev/null +++ b/include/linux/netfilter/nf_conntrack_sane.h @@ -0,0 +1,21 @@ +#ifndef _NF_CONNTRACK_SANE_H +#define _NF_CONNTRACK_SANE_H +/* SANE tracking. */ + +#ifdef __KERNEL__ + +#define SANE_PORT 6566 + +enum sane_state { + SANE_STATE_NORMAL, + SANE_STATE_START_REQUESTED, +}; + +/* This structure exists only once per master */ +struct nf_ct_sane_master { + enum sane_state state; +}; + +#endif /* __KERNEL__ */ + +#endif /* _NF_CONNTRACK_SANE_H */ diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index bd01b4633ee..68ec27490c2 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -45,6 +45,7 @@ union nf_conntrack_expect_proto { #include #include #include +#include /* per conntrack: application helper private data */ union nf_conntrack_help { @@ -52,6 +53,7 @@ union nf_conntrack_help { struct nf_ct_ftp_master ct_ftp_info; struct nf_ct_pptp_master ct_pptp_info; struct nf_ct_h323_master ct_h323_info; + struct nf_ct_sane_master ct_sane_info; }; #include -- cgit v1.2.3 From a09113c2c8ec59a5cc228efa5869aade2b8f13f7 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 7 Feb 2007 15:05:33 -0800 Subject: [NETFILTER]: tcp conntrack: do liberal tracking for picked up connections Do liberal tracking (only RSTs need to be in-window) for connections picked up without seeing a SYN to deal with window scaling. Also change logging of invalid packets not to log packets accepted by liberal tracking to avoid spamming the logs. Based on suggestion from James Ralston Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/nf_conntrack_tcp.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 2f4e98b90cc..007af4c2770 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -27,6 +27,9 @@ enum tcp_conntrack { /* This sender sent FIN first */ #define IP_CT_TCP_FLAG_CLOSE_INIT 0x04 +/* Be liberal in window checking */ +#define IP_CT_TCP_FLAG_BE_LIBERAL 0x08 + #ifdef __KERNEL__ struct ip_ct_tcp_state { @@ -34,7 +37,6 @@ struct ip_ct_tcp_state { u_int32_t td_maxend; /* max of ack + max(win, 1) */ u_int32_t td_maxwin; /* max(win) */ u_int8_t td_scale; /* window scale factor */ - u_int8_t loose; /* used when connection picked up from the middle */ u_int8_t flags; /* per direction options */ }; -- cgit v1.2.3 From cdd289a2f833b93e65b9a09a02c37f47a58140a8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 7 Feb 2007 15:09:46 -0800 Subject: [NETFILTER]: add IPv6-capable TCPMSS target Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/Kbuild | 1 + include/linux/netfilter/xt_TCPMSS.h | 10 ++++++++++ include/linux/netfilter_ipv4/ipt_TCPMSS.h | 7 +++---- 3 files changed, 14 insertions(+), 4 deletions(-) create mode 100644 include/linux/netfilter/xt_TCPMSS.h (limited to 'include') diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index 6328175a1c3..43397a414cd 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -33,6 +33,7 @@ header-y += xt_tcpmss.h header-y += xt_tcpudp.h header-y += xt_SECMARK.h header-y += xt_CONNSECMARK.h +header-y += xt_TCPMSS.h unifdef-y += nf_conntrack_common.h unifdef-y += nf_conntrack_ftp.h diff --git a/include/linux/netfilter/xt_TCPMSS.h b/include/linux/netfilter/xt_TCPMSS.h new file mode 100644 index 00000000000..53a292cd47f --- /dev/null +++ b/include/linux/netfilter/xt_TCPMSS.h @@ -0,0 +1,10 @@ +#ifndef _XT_TCPMSS_H +#define _XT_TCPMSS_H + +struct xt_tcpmss_info { + u_int16_t mss; +}; + +#define XT_TCPMSS_CLAMP_PMTU 0xffff + +#endif /* _XT_TCPMSS_H */ diff --git a/include/linux/netfilter_ipv4/ipt_TCPMSS.h b/include/linux/netfilter_ipv4/ipt_TCPMSS.h index aadb39580cd..7a850f94582 100644 --- a/include/linux/netfilter_ipv4/ipt_TCPMSS.h +++ b/include/linux/netfilter_ipv4/ipt_TCPMSS.h @@ -1,10 +1,9 @@ #ifndef _IPT_TCPMSS_H #define _IPT_TCPMSS_H -struct ipt_tcpmss_info { - u_int16_t mss; -}; +#include -#define IPT_TCPMSS_CLAMP_PMTU 0xffff +#define ipt_tcpmss_info xt_tcpmss_info +#define IPT_TCPMSS_CLAMP_PMTU XT_TCPMSS_CLAMP_PMTU #endif /*_IPT_TCPMSS_H*/ -- cgit v1.2.3 From 41f4689a7c8cd76b77864461b3c58fde8f322b2c Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Wed, 7 Feb 2007 15:10:09 -0800 Subject: [NETFILTER]: NAT: optional source port randomization support This patch adds support to NAT to randomize source ports. Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv4/ip_nat.h | 1 + include/net/netfilter/nf_nat.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/netfilter_ipv4/ip_nat.h b/include/linux/netfilter_ipv4/ip_nat.h index bdf553620ca..bbca89aab81 100644 --- a/include/linux/netfilter_ipv4/ip_nat.h +++ b/include/linux/netfilter_ipv4/ip_nat.h @@ -16,6 +16,7 @@ enum ip_nat_manip_type #define IP_NAT_RANGE_MAP_IPS 1 #define IP_NAT_RANGE_PROTO_SPECIFIED 2 +#define IP_NAT_RANGE_PROTO_RANDOM 4 /* add randomness to "port" selection */ /* NAT sequence number modifications */ struct ip_nat_seq { diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h index 61c62068ca6..bc57dd7b9b5 100644 --- a/include/net/netfilter/nf_nat.h +++ b/include/net/netfilter/nf_nat.h @@ -16,6 +16,7 @@ enum nf_nat_manip_type #define IP_NAT_RANGE_MAP_IPS 1 #define IP_NAT_RANGE_PROTO_SPECIFIED 2 +#define IP_NAT_RANGE_PROTO_RANDOM 4 /* NAT sequence number modifications */ struct nf_nat_seq { -- cgit v1.2.3 From 6709dbbb1978abe039ea4b76c364bf003bf40de5 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 7 Feb 2007 15:11:19 -0800 Subject: [NETFILTER]: {ip,ip6}_tables: remove x_tables wrapper functions Use the x_tables functions directly to make it better visible which parts are shared between ip_tables and ip6_tables. Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv4/ip_tables.h | 12 +----------- include/linux/netfilter_ipv6/ip6_tables.h | 10 ---------- 2 files changed, 1 insertion(+), 21 deletions(-) (limited to 'include') diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index 98d566c5e32..c59bc6ff228 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -272,16 +272,6 @@ ipt_get_target(struct ipt_entry *e) #include extern void ipt_init(void) __init; -#define ipt_register_target(tgt) \ -({ (tgt)->family = AF_INET; \ - xt_register_target(tgt); }) -#define ipt_unregister_target(tgt) xt_unregister_target(tgt) - -#define ipt_register_match(mtch) \ -({ (mtch)->family = AF_INET; \ - xt_register_match(mtch); }) -#define ipt_unregister_match(mtch) xt_unregister_match(mtch) - //#define ipt_register_table(tbl, repl) xt_register_table(AF_INET, tbl, repl) //#define ipt_unregister_table(tbl) xt_unregister_table(AF_INET, tbl) @@ -290,7 +280,7 @@ extern int ipt_register_table(struct ipt_table *table, extern void ipt_unregister_table(struct ipt_table *table); /* net/sched/ipt.c: Gimme access to your targets! Gets target->me. */ -extern struct ipt_target *ipt_find_target(const char *name, u8 revision); +extern struct xt_target *ipt_find_target(const char *name, u8 revision); /* Standard entry. */ struct ipt_standard diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index 4aed340401d..2fbabab30d2 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -286,16 +286,6 @@ ip6t_get_target(struct ip6t_entry *e) #include extern void ip6t_init(void) __init; -#define ip6t_register_target(tgt) \ -({ (tgt)->family = AF_INET6; \ - xt_register_target(tgt); }) -#define ip6t_unregister_target(tgt) xt_unregister_target(tgt) - -#define ip6t_register_match(match) \ -({ (match)->family = AF_INET6; \ - xt_register_match(match); }) -#define ip6t_unregister_match(match) xt_unregister_match(match) - extern int ip6t_register_table(struct ip6t_table *table, const struct ip6t_replace *repl); extern void ip6t_unregister_table(struct ip6t_table *table); -- cgit v1.2.3 From e60a13e030867078f3c9fef8dca6cd8a5b883478 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 7 Feb 2007 15:12:33 -0800 Subject: [NETFILTER]: {ip,ip6}_tables: use struct xt_table instead of redefined structure names Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv4/ip_tables.h | 9 +++------ include/linux/netfilter_ipv6/ip6_tables.h | 6 +++--- 2 files changed, 6 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index c59bc6ff228..fccf4b87323 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -272,12 +272,9 @@ ipt_get_target(struct ipt_entry *e) #include extern void ipt_init(void) __init; -//#define ipt_register_table(tbl, repl) xt_register_table(AF_INET, tbl, repl) -//#define ipt_unregister_table(tbl) xt_unregister_table(AF_INET, tbl) - -extern int ipt_register_table(struct ipt_table *table, +extern int ipt_register_table(struct xt_table *table, const struct ipt_replace *repl); -extern void ipt_unregister_table(struct ipt_table *table); +extern void ipt_unregister_table(struct xt_table *table); /* net/sched/ipt.c: Gimme access to your targets! Gets target->me. */ extern struct xt_target *ipt_find_target(const char *name, u8 revision); @@ -305,7 +302,7 @@ extern unsigned int ipt_do_table(struct sk_buff **pskb, unsigned int hook, const struct net_device *in, const struct net_device *out, - struct ipt_table *table); + struct xt_table *table); #define IPT_ALIGN(s) XT_ALIGN(s) diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index 2fbabab30d2..e37698c337a 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -286,14 +286,14 @@ ip6t_get_target(struct ip6t_entry *e) #include extern void ip6t_init(void) __init; -extern int ip6t_register_table(struct ip6t_table *table, +extern int ip6t_register_table(struct xt_table *table, const struct ip6t_replace *repl); -extern void ip6t_unregister_table(struct ip6t_table *table); +extern void ip6t_unregister_table(struct xt_table *table); extern unsigned int ip6t_do_table(struct sk_buff **pskb, unsigned int hook, const struct net_device *in, const struct net_device *out, - struct ip6t_table *table); + struct xt_table *table); /* Check for an extension */ extern int ip6t_ext_hdr(u8 nexthdr); -- cgit v1.2.3 From a0ca215a730b2c4d5024143e64b0d80d50858667 Mon Sep 17 00:00:00 2001 From: Masahide NAKAMURA Date: Wed, 7 Feb 2007 15:12:57 -0800 Subject: [NETFILTER]: ip6_tables: support MH match This introduces match for Mobility Header (MH) described by Mobile IPv6 specification (RFC3775). User can specify the MH type or its range to be matched. Signed-off-by: Masahide NAKAMURA Signed-off-by: Yasuyuki Kozakai Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv6/ip6t_mh.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 include/linux/netfilter_ipv6/ip6t_mh.h (limited to 'include') diff --git a/include/linux/netfilter_ipv6/ip6t_mh.h b/include/linux/netfilter_ipv6/ip6t_mh.h new file mode 100644 index 00000000000..b9ca9a5f74d --- /dev/null +++ b/include/linux/netfilter_ipv6/ip6t_mh.h @@ -0,0 +1,15 @@ +#ifndef _IP6T_MH_H +#define _IP6T_MH_H + +/* MH matching stuff */ +struct ip6t_mh +{ + u_int8_t types[2]; /* MH type range */ + u_int8_t invflags; /* Inverse flags */ +}; + +/* Values for "invflags" field in struct ip6t_mh. */ +#define IP6T_MH_INV_TYPE 0x01 /* Invert the sense of type. */ +#define IP6T_MH_INV_MASK 0x01 /* All possible flags. */ + +#endif /*_IP6T_MH_H*/ -- cgit v1.2.3 From c3e79c05b45c3d6115d8c46e3012939c71573f13 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 7 Feb 2007 15:13:20 -0800 Subject: [NETFILTER]: ip_tables: remove declaration of non-existant ipt_find_target function Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv4/ip_tables.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index fccf4b87323..9527296595c 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -276,9 +276,6 @@ extern int ipt_register_table(struct xt_table *table, const struct ipt_replace *repl); extern void ipt_unregister_table(struct xt_table *table); -/* net/sched/ipt.c: Gimme access to your targets! Gets target->me. */ -extern struct xt_target *ipt_find_target(const char *name, u8 revision); - /* Standard entry. */ struct ipt_standard { -- cgit v1.2.3 From 9934e81c8c4981342dab3e386aff5d4499bea0d2 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 7 Feb 2007 15:14:28 -0800 Subject: [NETFILTER]: ip6_tables: remove redundant structure definitions Move ip6t_standard/ip6t_error_target/ip6t_error definitions to ip6_tables.h instead of defining them in each table individually. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv6/ip6_tables.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include') diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index e37698c337a..61aa10412fc 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -104,6 +104,25 @@ struct ip6t_entry unsigned char elems[0]; }; +/* Standard entry */ +struct ip6t_standard +{ + struct ip6t_entry entry; + struct ip6t_standard_target target; +}; + +struct ip6t_error_target +{ + struct ip6t_entry_target target; + char errorname[IP6T_FUNCTION_MAXNAMELEN]; +}; + +struct ip6t_error +{ + struct ip6t_entry entry; + struct ip6t_error_target target; +}; + /* * New IP firewall options for [gs]etsockopt at the RAW IP level. * Unlike BSD Linux inherits IP options so you don't have to use -- cgit v1.2.3 From 80c9abaabf4283f7cf4a0b3597cd302506635b7f Mon Sep 17 00:00:00 2001 From: Shinta Sugimoto Date: Thu, 8 Feb 2007 13:11:42 -0800 Subject: [XFRM]: Extension for dynamic update of endpoint address(es) Extend the XFRM framework so that endpoint address(es) in the XFRM databases could be dynamically updated according to a request (MIGRATE message) from user application. Target XFRM policy is first identified by the selector in the MIGRATE message. Next, the endpoint addresses of the matching templates and XFRM states are updated according to the MIGRATE message. Signed-off-by: Shinta Sugimoto Signed-off-by: Masahide NAKAMURA Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- include/linux/xfrm.h | 19 +++++++++++++++++++ include/net/xfrm.h | 44 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+) (limited to 'include') diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 9529ea1ae39..15ca89e9961 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -178,6 +178,9 @@ enum { XFRM_MSG_REPORT, #define XFRM_MSG_REPORT XFRM_MSG_REPORT + XFRM_MSG_MIGRATE, +#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE + __XFRM_MSG_MAX }; #define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) @@ -256,6 +259,7 @@ enum xfrm_attr_type_t { XFRMA_COADDR, /* xfrm_address_t */ XFRMA_LASTUSED, XFRMA_POLICY_TYPE, /* struct xfrm_userpolicy_type */ + XFRMA_MIGRATE, __XFRMA_MAX #define XFRMA_MAX (__XFRMA_MAX - 1) @@ -351,6 +355,19 @@ struct xfrm_user_report { struct xfrm_selector sel; }; +struct xfrm_user_migrate { + xfrm_address_t old_daddr; + xfrm_address_t old_saddr; + xfrm_address_t new_daddr; + xfrm_address_t new_saddr; + __u8 proto; + __u8 mode; + __u16 reserved; + __u32 reqid; + __u16 old_family; + __u16 new_family; +}; + #ifndef __KERNEL__ /* backwards compatibility for userspace */ #define XFRMGRP_ACQUIRE 1 @@ -375,6 +392,8 @@ enum xfrm_nlgroups { #define XFRMNLGRP_AEVENTS XFRMNLGRP_AEVENTS XFRMNLGRP_REPORT, #define XFRMNLGRP_REPORT XFRMNLGRP_REPORT + XFRMNLGRP_MIGRATE, +#define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE __XFRMNLGRP_MAX }; #define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index bf91d632901..16924cb772c 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -362,6 +362,19 @@ struct xfrm_policy struct xfrm_tmpl xfrm_vec[XFRM_MAX_DEPTH]; }; +struct xfrm_migrate { + xfrm_address_t old_daddr; + xfrm_address_t old_saddr; + xfrm_address_t new_daddr; + xfrm_address_t new_saddr; + u8 proto; + u8 mode; + u16 reserved; + u32 reqid; + u16 old_family; + u16 new_family; +}; + #define XFRM_KM_TIMEOUT 30 /* which seqno */ #define XFRM_REPLAY_SEQ 1 @@ -388,6 +401,7 @@ struct xfrm_mgr int (*new_mapping)(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport); int (*notify_policy)(struct xfrm_policy *x, int dir, struct km_event *c); int (*report)(u8 proto, struct xfrm_selector *sel, xfrm_address_t *addr); + int (*migrate)(struct xfrm_selector *sel, u8 dir, u8 type, struct xfrm_migrate *m, int num_bundles); }; extern int xfrm_register_km(struct xfrm_mgr *km); @@ -988,6 +1002,16 @@ extern int xfrm_bundle_ok(struct xfrm_policy *pol, struct xfrm_dst *xdst, struct flowi *fl, int family, int strict); extern void xfrm_init_pmtu(struct dst_entry *dst); +#ifdef CONFIG_XFRM_MIGRATE +extern int km_migrate(struct xfrm_selector *sel, u8 dir, u8 type, + struct xfrm_migrate *m, int num_bundles); +extern struct xfrm_state * xfrm_migrate_state_find(struct xfrm_migrate *m); +extern struct xfrm_state * xfrm_state_migrate(struct xfrm_state *x, + struct xfrm_migrate *m); +extern int xfrm_migrate(struct xfrm_selector *sel, u8 dir, u8 type, + struct xfrm_migrate *m, int num_bundles); +#endif + extern wait_queue_head_t km_waitq; extern int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport); extern void km_policy_expired(struct xfrm_policy *pol, int dir, int hard, u32 pid); @@ -1053,5 +1077,25 @@ static inline void xfrm_aevent_doreplay(struct xfrm_state *x) xfrm_replay_notify(x, XFRM_REPLAY_UPDATE); } +#ifdef CONFIG_XFRM_MIGRATE +static inline struct xfrm_algo *xfrm_algo_clone(struct xfrm_algo *orig) +{ + return (struct xfrm_algo *)kmemdup(orig, sizeof(*orig) + orig->alg_key_len, GFP_KERNEL); +} + +static inline void xfrm_states_put(struct xfrm_state **states, int n) +{ + int i; + for (i = 0; i < n; i++) + xfrm_state_put(*(states + i)); +} + +static inline void xfrm_states_delete(struct xfrm_state **states, int n) +{ + int i; + for (i = 0; i < n; i++) + xfrm_state_delete(*(states + i)); +} +#endif #endif /* _NET_XFRM_H */ -- cgit v1.2.3 From 08de61beab8a21c8e0b3906a97defda5f1f66ece Mon Sep 17 00:00:00 2001 From: Shinta Sugimoto Date: Thu, 8 Feb 2007 13:14:33 -0800 Subject: [PFKEYV2]: Extension for dynamic update of endpoint address(es) Extend PF_KEYv2 framework so that user application can take advantage of MIGRATE feature via PF_KEYv2 interface. User application can either send or receive an MIGRATE message to/from PF_KEY socket. Detail information can be found in the internet-draft . Signed-off-by: Shinta Sugimoto Signed-off-by: Masahide NAKAMURA Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- include/linux/pfkeyv2.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h index 265bafab649..26a518b67c0 100644 --- a/include/linux/pfkeyv2.h +++ b/include/linux/pfkeyv2.h @@ -251,7 +251,8 @@ struct sadb_x_sec_ctx { #define SADB_X_SPDEXPIRE 21 #define SADB_X_SPDDELETE2 22 #define SADB_X_NAT_T_NEW_MAPPING 23 -#define SADB_MAX 23 +#define SADB_X_MIGRATE 24 +#define SADB_MAX 24 /* Security Association flags */ #define SADB_SAFLAGS_PFS 1 -- cgit v1.2.3 From 95a9dc4390c8215d922e0ca2ebb95279261fe795 Mon Sep 17 00:00:00 2001 From: Andrew Hendry Date: Thu, 8 Feb 2007 13:34:02 -0800 Subject: [X.25]: Add call forwarding Adds call forwarding to X.25, allowing it to operate like an X.25 router. Useful if one needs to manipulate X.25 traffic with tools like tc. This is an update/cleanup based off a patch submitted by Daniel Ferenci a few years ago. Thanks Alan for the feedback. Added the null check to the clones. Moved the skb_clone's into the forwarding functions. Worked ok with Cisco XoT, linux X.25 back to back, and some old NTUs/PADs. Signed-off-by: Andrew Hendry Signed-off-by: David S. Miller --- include/net/x25.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include') diff --git a/include/net/x25.h b/include/net/x25.h index e47fe440d9d..3b1190514d9 100644 --- a/include/net/x25.h +++ b/include/net/x25.h @@ -161,6 +161,14 @@ struct x25_sock { unsigned long vc_facil_mask; /* inc_call facilities mask */ }; +struct x25_forward { + struct list_head node; + unsigned int lci; + struct net_device *dev1; + struct net_device *dev2; + atomic_t refcnt; +}; + static inline struct x25_sock *x25_sk(const struct sock *sk) { return (struct x25_sock *)sk; @@ -198,6 +206,13 @@ extern int x25_negotiate_facilities(struct sk_buff *, struct sock *, struct x25_dte_facilities *); extern void x25_limit_facilities(struct x25_facilities *, struct x25_neigh *); +/* x25_forward.c */ +extern void x25_clear_forward_by_lci(unsigned int lci); +extern void x25_clear_forward_by_dev(struct net_device *); +extern int x25_forward_data(int, struct x25_neigh *, struct sk_buff *); +extern int x25_forward_call(struct x25_address *, struct x25_neigh *, + struct sk_buff *, int); + /* x25_in.c */ extern int x25_process_rx_frame(struct sock *, struct sk_buff *); extern int x25_backlog_rcv(struct sock *, struct sk_buff *); @@ -282,6 +297,8 @@ extern struct hlist_head x25_list; extern rwlock_t x25_list_lock; extern struct list_head x25_route_list; extern rwlock_t x25_route_list_lock; +extern struct list_head x25_forward_list; +extern rwlock_t x25_forward_list_lock; extern int x25_proc_init(void); extern void x25_proc_exit(void); -- cgit v1.2.3 From 39e21c0d34fe769d06839679fa920217359a58b0 Mon Sep 17 00:00:00 2001 From: Andrew Hendry Date: Thu, 8 Feb 2007 13:34:36 -0800 Subject: [X.25]: Adds /proc/sys/net/x25/x25_forward to control forwarding. echo "1" > /proc/sys/net/x25/x25_forward To turn on x25_forwarding, defaults to off Requires the previous patch. Signed-off-by: Andrew Hendry Signed-off-by: David S. Miller --- include/linux/sysctl.h | 3 ++- include/net/x25.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 81480e61346..665412c4f4b 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -699,7 +699,8 @@ enum { NET_X25_CALL_REQUEST_TIMEOUT=2, NET_X25_RESET_REQUEST_TIMEOUT=3, NET_X25_CLEAR_REQUEST_TIMEOUT=4, - NET_X25_ACK_HOLD_BACK_TIMEOUT=5 + NET_X25_ACK_HOLD_BACK_TIMEOUT=5, + NET_X25_FORWARD=6 }; /* /proc/sys/net/token-ring */ diff --git a/include/net/x25.h b/include/net/x25.h index 3b1190514d9..fc3f03d976f 100644 --- a/include/net/x25.h +++ b/include/net/x25.h @@ -180,6 +180,7 @@ extern int sysctl_x25_call_request_timeout; extern int sysctl_x25_reset_request_timeout; extern int sysctl_x25_clear_request_timeout; extern int sysctl_x25_ack_holdback_timeout; +extern int sysctl_x25_forward; extern int x25_addr_ntoa(unsigned char *, struct x25_address *, struct x25_address *); -- cgit v1.2.3 From 2356f4cb191100a5e92d537f13e5efdbc697e9cb Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 8 Feb 2007 13:37:42 -0800 Subject: [S390]: Rewrite of the IUCV base code, part 2 Add rewritten IUCV base code to net/iucv. Signed-off-by: Frank Pavlic Signed-off-by: Martin Schwidefsky Signed-off-by: David S. Miller --- include/net/iucv/iucv.h | 415 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 415 insertions(+) create mode 100644 include/net/iucv/iucv.h (limited to 'include') diff --git a/include/net/iucv/iucv.h b/include/net/iucv/iucv.h new file mode 100644 index 00000000000..746e7416261 --- /dev/null +++ b/include/net/iucv/iucv.h @@ -0,0 +1,415 @@ +/* + * drivers/s390/net/iucv.h + * IUCV base support. + * + * S390 version + * Copyright 2000, 2006 IBM Corporation + * Author(s):Alan Altmark (Alan_Altmark@us.ibm.com) + * Xenia Tkatschow (xenia@us.ibm.com) + * Rewritten for af_iucv: + * Martin Schwidefsky + * + * + * Functionality: + * To explore any of the IUCV functions, one must first register their + * program using iucv_register(). Once your program has successfully + * completed a register, it can exploit the other functions. + * For furthur reference on all IUCV functionality, refer to the + * CP Programming Services book, also available on the web thru + * www.ibm.com/s390/vm/pubs, manual # SC24-5760 + * + * Definition of Return Codes + * - All positive return codes including zero are reflected back + * from CP. The definition of each return code can be found in + * CP Programming Services book. + * - Return Code of: + * -EINVAL: Invalid value + * -ENOMEM: storage allocation failed + */ + +#include +#include + +/* + * IUCV option flags usable by device drivers: + * + * IUCV_IPRMDATA Indicates that your program can handle a message in the + * parameter list / a message is sent in the parameter list. + * Used for iucv_path_accept, iucv_path_connect, + * iucv_message_reply, iucv_message_send, iucv_message_send2way. + * IUCV_IPQUSCE Indicates that you do not want to receive messages on this + * path until an iucv_path_resume is issued. + * Used for iucv_path_accept, iucv_path_connect. + * IUCV_IPBUFLST Indicates that an address list is used for the message data. + * Used for iucv_message_receive, iucv_message_send, + * iucv_message_send2way. + * IUCV_IPPRTY Specifies that you want to send priority messages. + * Used for iucv_path_accept, iucv_path_connect, + * iucv_message_reply, iucv_message_send, iucv_message_send2way. + * IUCV_IPSYNC Indicates a synchronous send request. + * Used for iucv_message_send, iucv_message_send2way. + * IUCV_IPANSLST Indicates that an address list is used for the reply data. + * Used for iucv_message_reply, iucv_message_send2way. + * IUCV_IPLOCAL Specifies that the communication partner has to be on the + * local system. If local is specified no target class can be + * specified. + * Used for iucv_path_connect. + * + * All flags are defined in the input field IPFLAGS1 of each function + * and can be found in CP Programming Services. + */ +#define IUCV_IPRMDATA 0x80 +#define IUCV_IPQUSCE 0x40 +#define IUCV_IPBUFLST 0x40 +#define IUCV_IPPRTY 0x20 +#define IUCV_IPANSLST 0x08 +#define IUCV_IPSYNC 0x04 +#define IUCV_IPLOCAL 0x01 + +/* + * iucv_array : Defines buffer array. + * Inside the array may be 31- bit addresses and 31-bit lengths. + * Use a pointer to an iucv_array as the buffer, reply or answer + * parameter on iucv_message_send, iucv_message_send2way, iucv_message_receive + * and iucv_message_reply if IUCV_IPBUFLST or IUCV_IPANSLST are used. + */ +struct iucv_array { + u32 address; + u32 length; +} __attribute__ ((aligned (8))); + +extern struct bus_type iucv_bus; +extern struct device *iucv_root; + +/* + * struct iucv_path + * pathid: 16 bit path identification + * msglim: 16 bit message limit + * flags: properties of the path: IPRMDATA, IPQUSCE, IPPRTY + * handler: address of iucv handler structure + * private: private information of the handler associated with the path + * list: list_head for the iucv_handler path list. + */ +struct iucv_path { + u16 pathid; + u16 msglim; + u8 flags; + void *private; + struct iucv_handler *handler; + struct list_head list; +}; + +/* + * struct iucv_message + * id: 32 bit message id + * audit: 32 bit error information of purged or replied messages + * class: 32 bit target class of a message (source class for replies) + * tag: 32 bit tag to be associated with the message + * length: 32 bit length of the message / reply + * reply_size: 32 bit maximum allowed length of the reply + * rmmsg: 8 byte inline message + * flags: message properties (IUCV_IPPRTY) + */ +struct iucv_message { + u32 id; + u32 audit; + u32 class; + u32 tag; + u32 length; + u32 reply_size; + u8 rmmsg[8]; + u8 flags; +}; + +/* + * struct iucv_handler + * + * A vector of functions that handle IUCV interrupts. Each functions gets + * a parameter area as defined by the CP Programming Services and private + * pointer that is provided by the user of the interface. + */ +struct iucv_handler { + /* + * The path_pending function is called after an iucv interrupt + * type 0x01 has been received. The base code allocates a path + * structure and "asks" the handler if this path belongs to the + * handler. To accept the path the path_pending function needs + * to call iucv_path_accept and return 0. If the callback returns + * a value != 0 the iucv base code will continue with the next + * handler. The order in which the path_pending functions are + * called is the order of the registration of the iucv handlers + * to the base code. + */ + int (*path_pending)(struct iucv_path *, u8 ipvmid[8], u8 ipuser[16]); + /* + * The path_complete function is called after an iucv interrupt + * type 0x02 has been received for a path that has been established + * for this handler with iucv_path_connect and got accepted by the + * peer with iucv_path_accept. + */ + void (*path_complete)(struct iucv_path *, u8 ipuser[16]); + /* + * The path_severed function is called after an iucv interrupt + * type 0x03 has been received. The communication peer shutdown + * his end of the communication path. The path still exists and + * remaining messages can be received until a iucv_path_sever + * shuts down the other end of the path as well. + */ + void (*path_severed)(struct iucv_path *, u8 ipuser[16]); + /* + * The path_quiesced function is called after an icuv interrupt + * type 0x04 has been received. The communication peer has quiesced + * the path. Delivery of messages is stopped until iucv_path_resume + * has been called. + */ + void (*path_quiesced)(struct iucv_path *, u8 ipuser[16]); + /* + * The path_resumed function is called after an icuv interrupt + * type 0x05 has been received. The communication peer has resumed + * the path. + */ + void (*path_resumed)(struct iucv_path *, u8 ipuser[16]); + /* + * The message_pending function is called after an icuv interrupt + * type 0x06 or type 0x07 has been received. A new message is + * availabe and can be received with iucv_message_receive. + */ + void (*message_pending)(struct iucv_path *, struct iucv_message *); + /* + * The message_complete function is called after an icuv interrupt + * type 0x08 or type 0x09 has been received. A message send with + * iucv_message_send2way has been replied to. The reply can be + * received with iucv_message_receive. + */ + void (*message_complete)(struct iucv_path *, struct iucv_message *); + + struct list_head list; + struct list_head paths; +}; + +/** + * iucv_register: + * @handler: address of iucv handler structure + * @smp: != 0 indicates that the handler can deal with out of order messages + * + * Registers a driver with IUCV. + * + * Returns 0 on success, -ENOMEM if the memory allocation for the pathid + * table failed, or -EIO if IUCV_DECLARE_BUFFER failed on all cpus. + */ +int iucv_register(struct iucv_handler *handler, int smp); + +/** + * iucv_unregister + * @handler: address of iucv handler structure + * @smp: != 0 indicates that the handler can deal with out of order messages + * + * Unregister driver from IUCV. + */ +void iucv_unregister(struct iucv_handler *handle, int smp); + +/** + * iucv_path_alloc + * @msglim: initial message limit + * @flags: initial flags + * @gfp: kmalloc allocation flag + * + * Allocate a new path structure for use with iucv_connect. + * + * Returns NULL if the memory allocation failed or a pointer to the + * path structure. + */ +static inline struct iucv_path *iucv_path_alloc(u16 msglim, u8 flags, gfp_t gfp) +{ + struct iucv_path *path; + + path = kzalloc(sizeof(struct iucv_path), gfp); + if (path) { + path->msglim = msglim; + path->flags = flags; + } + return path; +} + +/** + * iucv_path_free + * @path: address of iucv path structure + * + * Frees a path structure. + */ +static inline void iucv_path_free(struct iucv_path *path) +{ + kfree(path); +} + +/** + * iucv_path_accept + * @path: address of iucv path structure + * @handler: address of iucv handler structure + * @userdata: 16 bytes of data reflected to the communication partner + * @private: private data passed to interrupt handlers for this path + * + * This function is issued after the user received a connection pending + * external interrupt and now wishes to complete the IUCV communication path. + * + * Returns the result of the CP IUCV call. + */ +int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler, + u8 userdata[16], void *private); + +/** + * iucv_path_connect + * @path: address of iucv path structure + * @handler: address of iucv handler structure + * @userid: 8-byte user identification + * @system: 8-byte target system identification + * @userdata: 16 bytes of data reflected to the communication partner + * @private: private data passed to interrupt handlers for this path + * + * This function establishes an IUCV path. Although the connect may complete + * successfully, you are not able to use the path until you receive an IUCV + * Connection Complete external interrupt. + * + * Returns the result of the CP IUCV call. + */ +int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler, + u8 userid[8], u8 system[8], u8 userdata[16], + void *private); + +/** + * iucv_path_quiesce: + * @path: address of iucv path structure + * @userdata: 16 bytes of data reflected to the communication partner + * + * This function temporarily suspends incoming messages on an IUCV path. + * You can later reactivate the path by invoking the iucv_resume function. + * + * Returns the result from the CP IUCV call. + */ +int iucv_path_quiesce(struct iucv_path *path, u8 userdata[16]); + +/** + * iucv_path_resume: + * @path: address of iucv path structure + * @userdata: 16 bytes of data reflected to the communication partner + * + * This function resumes incoming messages on an IUCV path that has + * been stopped with iucv_path_quiesce. + * + * Returns the result from the CP IUCV call. + */ +int iucv_path_resume(struct iucv_path *path, u8 userdata[16]); + +/** + * iucv_path_sever + * @path: address of iucv path structure + * @userdata: 16 bytes of data reflected to the communication partner + * + * This function terminates an IUCV path. + * + * Returns the result from the CP IUCV call. + */ +int iucv_path_sever(struct iucv_path *path, u8 userdata[16]); + +/** + * iucv_message_purge + * @path: address of iucv path structure + * @msg: address of iucv msg structure + * @srccls: source class of message + * + * Cancels a message you have sent. + * + * Returns the result from the CP IUCV call. + */ +int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg, + u32 srccls); + +/** + * iucv_message_receive + * @path: address of iucv path structure + * @msg: address of iucv msg structure + * @flags: flags that affect how the message is received (IUCV_IPBUFLST) + * @buffer: address of data buffer or address of struct iucv_array + * @size: length of data buffer + * @residual: + * + * This function receives messages that are being sent to you over + * established paths. This function will deal with RMDATA messages + * embedded in struct iucv_message as well. + * + * Returns the result from the CP IUCV call. + */ +int iucv_message_receive(struct iucv_path *path, struct iucv_message *msg, + u8 flags, void *buffer, size_t size, size_t *residual); + +/** + * iucv_message_reject + * @path: address of iucv path structure + * @msg: address of iucv msg structure + * + * The reject function refuses a specified message. Between the time you + * are notified of a message and the time that you complete the message, + * the message may be rejected. + * + * Returns the result from the CP IUCV call. + */ +int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg); + +/** + * iucv_message_reply + * @path: address of iucv path structure + * @msg: address of iucv msg structure + * @flags: how the reply is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST) + * @reply: address of data buffer or address of struct iucv_array + * @size: length of reply data buffer + * + * This function responds to the two-way messages that you receive. You + * must identify completely the message to which you wish to reply. ie, + * pathid, msgid, and trgcls. Prmmsg signifies the data is moved into + * the parameter list. + * + * Returns the result from the CP IUCV call. + */ +int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg, + u8 flags, void *reply, size_t size); + +/** + * iucv_message_send + * @path: address of iucv path structure + * @msg: address of iucv msg structure + * @flags: how the message is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST) + * @srccls: source class of message + * @buffer: address of data buffer or address of struct iucv_array + * @size: length of send buffer + * + * This function transmits data to another application. Data to be + * transmitted is in a buffer and this is a one-way message and the + * receiver will not reply to the message. + * + * Returns the result from the CP IUCV call. + */ +int iucv_message_send(struct iucv_path *path, struct iucv_message *msg, + u8 flags, u32 srccls, void *buffer, size_t size); + +/** + * iucv_message_send2way + * @path: address of iucv path structure + * @msg: address of iucv msg structure + * @flags: how the message is sent and the reply is received + * (IUCV_IPRMDATA, IUCV_IPBUFLST, IUCV_IPPRTY, IUCV_ANSLST) + * @srccls: source class of message + * @buffer: address of data buffer or address of struct iucv_array + * @size: length of send buffer + * @ansbuf: address of answer buffer or address of struct iucv_array + * @asize: size of reply buffer + * + * This function transmits data to another application. Data to be + * transmitted is in a buffer. The receiver of the send is expected to + * reply to the message and a buffer is provided into which IUCV moves + * the reply to this message. + * + * Returns the result from the CP IUCV call. + */ +int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg, + u8 flags, u32 srccls, void *buffer, size_t size, + void *answer, size_t asize, size_t *residual); -- cgit v1.2.3 From eac3731bd04c7131478722a3c148b78774553116 Mon Sep 17 00:00:00 2001 From: Jennifer Hunt Date: Thu, 8 Feb 2007 13:51:54 -0800 Subject: [S390]: Add AF_IUCV socket support From: Jennifer Hunt This patch adds AF_IUCV socket support. Signed-off-by: Frank Pavlic Signed-off-by: Martin Schwidefsky Signed-off-by: David S. Miller --- include/linux/net.h | 2 +- include/linux/socket.h | 4 +- include/net/iucv/af_iucv.h | 106 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 110 insertions(+), 2 deletions(-) create mode 100644 include/net/iucv/af_iucv.h (limited to 'include') diff --git a/include/linux/net.h b/include/linux/net.h index f28d8a2e2c9..4db21e63d8d 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -24,7 +24,7 @@ struct poll_table_struct; struct inode; -#define NPROTO 32 /* should be enough for now.. */ +#define NPROTO 33 /* should be enough for now.. */ #define SYS_SOCKET 1 /* sys_socket(2) */ #define SYS_BIND 2 /* sys_bind(2) */ diff --git a/include/linux/socket.h b/include/linux/socket.h index 92cd38efad7..fcd35a210e7 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -187,7 +187,8 @@ struct ucred { #define AF_LLC 26 /* Linux LLC */ #define AF_TIPC 30 /* TIPC sockets */ #define AF_BLUETOOTH 31 /* Bluetooth sockets */ -#define AF_MAX 32 /* For now.. */ +#define AF_IUCV 32 /* IUCV sockets */ +#define AF_MAX 33 /* For now.. */ /* Protocol families, same as address families. */ #define PF_UNSPEC AF_UNSPEC @@ -220,6 +221,7 @@ struct ucred { #define PF_LLC AF_LLC #define PF_TIPC AF_TIPC #define PF_BLUETOOTH AF_BLUETOOTH +#define PF_IUCV AF_IUCV #define PF_MAX AF_MAX /* Maximum queue length specifiable by listen. */ diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h new file mode 100644 index 00000000000..04d1abb72d2 --- /dev/null +++ b/include/net/iucv/af_iucv.h @@ -0,0 +1,106 @@ +/* + * Copyright 2006 IBM Corporation + * IUCV protocol stack for Linux on zSeries + * Version 1.0 + * Author(s): Jennifer Hunt + * + */ + +#ifndef __AFIUCV_H +#define __AFIUCV_H + +#include +#include +#include +#include +#include + +#ifndef AF_IUCV +#define AF_IUCV 32 +#define PF_IUCV AF_IUCV +#endif + +/* Connection and socket states */ +enum { + IUCV_CONNECTED = 1, + IUCV_OPEN, + IUCV_BOUND, + IUCV_LISTEN, + IUCV_SEVERED, + IUCV_DISCONN, + IUCV_CLOSED +}; + +#define IUCV_QUEUELEN_DEFAULT 65535 +#define IUCV_CONN_TIMEOUT (HZ * 40) +#define IUCV_DISCONN_TIMEOUT (HZ * 2) +#define IUCV_CONN_IDLE_TIMEOUT (HZ * 60) +#define IUCV_BUFSIZE_DEFAULT 32768 + +/* IUCV socket address */ +struct sockaddr_iucv { + sa_family_t siucv_family; + unsigned short siucv_port; /* Reserved */ + unsigned int siucv_addr; /* Reserved */ + char siucv_nodeid[8]; /* Reserved */ + char siucv_user_id[8]; /* Guest User Id */ + char siucv_name[8]; /* Application Name */ +}; + + +/* Common socket structures and functions */ + +#define iucv_sk(__sk) ((struct iucv_sock *) __sk) + +struct iucv_sock { + struct sock sk; + char src_user_id[8]; + char src_name[8]; + char dst_user_id[8]; + char dst_name[8]; + struct list_head accept_q; + struct sock *parent; + struct iucv_path *path; + struct sk_buff_head send_skb_q; + unsigned int send_tag; +}; + +struct iucv_sock_list { + struct hlist_head head; + rwlock_t lock; + atomic_t autobind_name; +}; + +static void iucv_sock_destruct(struct sock *sk); +static void iucv_sock_cleanup_listen(struct sock *parent); +static void iucv_sock_kill(struct sock *sk); +static void iucv_sock_close(struct sock *sk); +static int iucv_sock_create(struct socket *sock, int proto); +static int iucv_sock_bind(struct socket *sock, struct sockaddr *addr, + int addr_len); +static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr, + int alen, int flags); +static int iucv_sock_listen(struct socket *sock, int backlog); +static int iucv_sock_accept(struct socket *sock, struct socket *newsock, + int flags); +static int iucv_sock_getname(struct socket *sock, struct sockaddr *addr, + int *len, int peer); +static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *msg, size_t len); +static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *msg, size_t len, int flags); +unsigned int iucv_sock_poll(struct file *file, struct socket *sock, + poll_table *wait); +static int iucv_sock_release(struct socket *sock); +static int iucv_sock_shutdown(struct socket *sock, int how); + +void iucv_sock_link(struct iucv_sock_list *l, struct sock *s); +void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s); +int iucv_sock_wait_state(struct sock *sk, int state, int state2, + unsigned long timeo); +int iucv_sock_wait_cnt(struct sock *sk, unsigned long timeo); +void iucv_accept_enqueue(struct sock *parent, struct sock *sk); +void iucv_accept_unlink(struct sock *sk); +struct sock *iucv_accept_dequeue(struct sock *parent, struct socket *newsock); + +#endif /* __IUCV_H */ -- cgit v1.2.3 From dbca9b2750e3b1ee6f56a616160ccfc12e8b161f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 8 Feb 2007 14:16:46 -0800 Subject: [NET]: change layout of ehash table ehash table layout is currently this one : First half of this table is used by sockets not in TIME_WAIT state Second half of it is used by sockets in TIME_WAIT state. This is non optimal because of for a given hash or socket, the two chain heads are located in separate cache lines. Moreover the locks of the second half are never used. If instead of this halving, we use two list heads in inet_ehash_bucket instead of only one, we probably can avoid one cache miss, and reduce ram usage, particularly if sizeof(rwlock_t) is big (various CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC settings). So we still halves the table but we keep together related chains to speedup lookups and socket state change. In this patch I did not try to align struct inet_ehash_bucket, but a future patch could try to make this structure have a convenient size (a power of two or a multiple of L1_CACHE_SIZE). I guess rwlock will just vanish as soon as RCU is plugged into ehash :) , so maybe we dont need to scratch our heads to align the bucket... Note : In case struct inet_ehash_bucket is not a power of two, we could probably change alloc_large_system_hash() (in case it use __get_free_pages()) to free the unused space. It currently allocates a big zone, but the last quarter of it could be freed. Again, this should be a temporary 'problem'. Patch tested on ipv4 tcp only, but should be OK for IPV6 and DCCP. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/inet_hashtables.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index 34cc76e3ddb..d27ee8c0da3 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -34,12 +34,13 @@ #include /* This is for all connections with a full identity, no wildcards. - * New scheme, half the table is for TIME_WAIT, the other half is - * for the rest. I'll experiment with dynamic table growth later. + * One chain is dedicated to TIME_WAIT sockets. + * I'll experiment with dynamic table growth later. */ struct inet_ehash_bucket { rwlock_t lock; struct hlist_head chain; + struct hlist_head twchain; }; /* There are a few simple rules, which allow for local port reuse by @@ -97,8 +98,7 @@ struct inet_hashinfo { * * TCP_ESTABLISHED <= sk->sk_state < TCP_CLOSE * - * First half of the table is for sockets not in TIME_WAIT, second half - * is for TIME_WAIT sockets only. + * TIME_WAIT sockets use a separate chain (twchain). */ struct inet_ehash_bucket *ehash; @@ -369,7 +369,7 @@ static inline struct sock * } /* Must check for a TIME_WAIT'er before going to listener hash. */ - sk_for_each(sk, node, &(head + hashinfo->ehash_size)->chain) { + sk_for_each(sk, node, &head->twchain) { if (INET_TW_MATCH(sk, hash, acookie, saddr, daddr, ports, dif)) goto hit; } -- cgit v1.2.3 From 42c05f6e6e3d57495054a4cae35850b3f7d1c343 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 8 Feb 2007 16:01:09 -0800 Subject: [ATM]: atmarp.h needs to always include linux/types.h To provide the __be* types, even for userspace includes. Reported by Andrew Walrond. Signed-off-by: David S. Miller --- include/linux/atmarp.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/atmarp.h b/include/linux/atmarp.h index ee108f9e9cb..231f4bdec73 100644 --- a/include/linux/atmarp.h +++ b/include/linux/atmarp.h @@ -6,9 +6,7 @@ #ifndef _LINUX_ATMARP_H #define _LINUX_ATMARP_H -#ifdef __KERNEL__ #include -#endif #include #include -- cgit v1.2.3 From 9f4bd5dde81b5cb94e4f52f2f05825aa0422f1ff Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Sun, 1 Oct 2006 10:48:04 +0100 Subject: [ALSA] snd-emu10k1: Added support for emu1010, including E-Mu 1212m and E-Mu 1820m Signed-off-by: James Courtier-Dutton Signed-off-by: Jaroslav Kysela --- include/sound/emu10k1.h | 315 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 313 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 3d3c1514cf7..396812eb668 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -188,7 +188,35 @@ #define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */ /* NOTE: The rest of the bits in this register */ /* _are_ relevant under Linux. */ -#define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */ +#define HCFG_PUSH_BUTTON_ENABLE 0x00100000 /* Enables Volume Inc/Dec and Mute functions */ +#define HCFG_BAUD_RATE 0x00080000 /* 0 = 48kHz, 1 = 44.1kHz */ +#define HCFG_EXPANDED_MEM 0x00040000 /* 1 = any 16M of 4G addr, 0 = 32M of 2G addr */ +#define HCFG_CODECFORMAT_MASK 0x00030000 /* CODEC format */ + +/* Specific to Alice2, CA0102 */ +#define HCFG_CODECFORMAT_AC97_1 0x00000000 /* AC97 CODEC format -- Ver 1.03 */ +#define HCFG_CODECFORMAT_AC97_2 0x00010000 /* AC97 CODEC format -- Ver 2.1 */ +#define HCFG_AUTOMUTE_ASYNC 0x00008000 /* When set, the async sample rate convertors */ + /* will automatically mute their output when */ + /* they are not rate-locked to the external */ + /* async audio source */ +#define HCFG_AUTOMUTE_SPDIF 0x00004000 /* When set, the async sample rate convertors */ + /* will automatically mute their output when */ + /* the SPDIF V-bit indicates invalid audio */ +#define HCFG_EMU32_SLAVE 0x00002000 /* 0 = Master, 1 = Slave. Slave for EMU1010 */ +#define HCFG_SLOW_RAMP 0x00001000 /* Increases Send Smoothing time constant */ +/* 0x00000800 not used on Alice2 */ +#define HCFG_PHASE_TRACK_MASK 0x00000700 /* When set, forces corresponding input to */ + /* phase track the previous input. */ + /* I2S0 can phase track the last S/PDIF input */ +#define HCFG_I2S_ASRC_ENABLE 0x00000070 /* When set, enables asynchronous sample rate */ + /* conversion for the corresponding */ + /* I2S format input */ +/* Rest of HCFG 0x0000000f same as below. LOCKSOUNDCACHE etc. */ + + + +/* Older chips */ #define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */ #define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */ #define HCFG_GPINPUT0 0x00004000 /* External pin112 */ @@ -886,6 +914,280 @@ #define A_HIWORD_RESULT_MASK 0x007ff000 #define A_HIWORD_OPA_MASK 0x000007ff +/************************************************************************************************/ +/* EMU1010m HANA FPGA registers */ +/************************************************************************************************/ +#define EMU_HANA_DESTHI 0x00 /* 0000xxx 3 bits Link Destination */ +#define EMU_HANA_DESTLO 0x01 /* 00xxxxx 5 bits */ +#define EMU_HANA_SRCHI 0x02 /* 0000xxx 3 bits Link Source */ +#define EMU_HANA_SRCLO 0x03 /* 00xxxxx 5 bits */ +#define EMU_HANA_DOCK_PWR 0x04 /* 000000x 1 bits Audio Dock power */ +#define EMU_HANA_DOCK_PWR_ON 0x01 /* Audio Dock power on */ +#define EMU_HANA_WCLOCK 0x05 /* 0000xxx 3 bits Word Clock source select */ + /* Must be written after power on to reset DLL */ + /* One is unable to detect the Audio dock without this */ +#define EMU_HANA_WCLOCK_SRC_MASK 0x07 +#define EMU_HANA_WCLOCK_INT_48K 0x00 +#define EMU_HANA_WCLOCK_INT_44_1K 0x01 +#define EMU_HANA_WCLOCK_HANA_SPDIF_IN 0x02 +#define EMU_HANA_WCLOCK_HANA_ADAT_IN 0x03 +#define EMU_HANA_WCLOCK_SYNC_BNCN 0x04 +#define EMU_HANA_WCLOCK_2ND_HANA 0x05 +#define EMU_HANA_WCLOCK_SRC_RESERVED 0x06 +#define EMU_HANA_WCLOCK_OFF 0x07 /* For testing, forces fallback to DEFCLOCK */ +#define EMU_HANA_WCLOCK_MULT_MASK 0x18 +#define EMU_HANA_WCLOCK_1X 0x00 +#define EMU_HANA_WCLOCK_2X 0x08 +#define EMU_HANA_WCLOCK_4X 0x10 +#define EMU_HANA_WCLOCK_MULT_RESERVED 0x18 + +#define EMU_HANA_DEFCLOCK 0x06 /* 000000x 1 bits Default Word Clock */ +#define EMU_HANA_DEFCLOCK_48K 0x00 +#define EMU_HANA_DEFCLOCK_44_1K 0x01 + +#define EMU_HANA_UNMUTE 0x07 /* 000000x 1 bits Mute all audio outputs */ +#define EMU_MUTE 0x00 +#define EMU_UNMUTE 0x01 + +#define EMU_HANA_FPGA_CONFIG 0x08 /* 00000xx 2 bits Config control of FPGAs */ +#define EMU_HANA_FPGA_CONFIG_AUDIODOCK 0x01 /* Set in order to program FPGA on Audio Dock */ +#define EMU_HANA_FPGA_CONFIG_HANA 0x02 /* Set in order to program FPGA on Hana */ + +#define EMU_HANA_IRQ_ENABLE 0x09 /* 000xxxx 4 bits IRQ Enable */ +#define EMU_HANA_IRQ_WCLK_CHANGED 0x01 +#define EMU_HANA_IRQ_ADAT 0x02 +#define EMU_HANA_IRQ_DOCK 0x04 +#define EMU_HANA_IRQ_DOCK_LOST 0x08 + +#define EMU_HANA_SPDIF_MODE 0x0a /* 00xxxxx 5 bits SPDIF MODE */ +#define EMU_HANA_SPDIF_MODE_TX_COMSUMER 0x00 +#define EMU_HANA_SPDIF_MODE_TX_PRO 0x01 +#define EMU_HANA_SPDIF_MODE_TX_NOCOPY 0x02 +#define EMU_HANA_SPDIF_MODE_RX_COMSUMER 0x00 +#define EMU_HANA_SPDIF_MODE_RX_PRO 0x04 +#define EMU_HANA_SPDIF_MODE_RX_NOCOPY 0x08 +#define EMU_HANA_SPDIF_MODE_RX_INVALID 0x10 + +#define EMU_HANA_OPTICAL_TYPE 0x0b /* 00000xx 2 bits ADAT or SPDIF in/out */ +#define EMU_HANA_OPTICAL_IN_SPDIF 0x00 +#define EMU_HANA_OPTICAL_IN_ADAT 0x01 +#define EMU_HANA_OPTICAL_OUT_SPDIF 0x00 +#define EMU_HANA_OPTICAL_OUT_ADAT 0x02 + +#define EMU_HANA_MIDI 0x0c /* 000000x 1 bit Control MIDI */ +#define EMU_HANA_MIDI_IN_FROM_HAMOA 0x00 /* HAMOA MIDI in to Alice 2 MIDI B */ +#define EMU_HANA_MIDI_IN_FROM_DOCK 0x01 /* Audio Dock MIDI in to Alice 2 MIDI B */ + +#define EMU_HANA_DOCK_LEDS_1 0x0d /* 000xxxx 4 bit Audio Dock LEDs */ +#define EMU_HANA_DOCK_LEDS_1_MIDI1 0x01 /* MIDI 1 LED on */ +#define EMU_HANA_DOCK_LEDS_1_MIDI2 0x02 /* MIDI 2 LED on */ +#define EMU_HANA_DOCK_LEDS_1_SMPTE_IN 0x04 /* SMPTE IN LED on */ +#define EMU_HANA_DOCK_LEDS_1_SMPTE_OUT 0x08 /* SMPTE OUT LED on */ + +#define EMU_HANA_DOCK_LEDS_2 0x0e /* 0xxxxxx 6 bit Audio Dock LEDs */ +#define EMU_HANA_DOCK_LEDS_2_44K 0x01 /* 44.1 kHz LED on */ +#define EMU_HANA_DOCK_LEDS_2_48K 0x02 /* 48 kHz LED on */ +#define EMU_HANA_DOCK_LEDS_2_96K 0x04 /* 96 kHz LED on */ +#define EMU_HANA_DOCK_LEDS_2_192K 0x08 /* 192 kHz LED on */ +#define EMU_HANA_DOCK_LEDS_2_LOCK 0x10 /* LOCK LED on */ +#define EMU_HANA_DOCK_LEDS_2_EXT 0x20 /* EXT LED on */ + +#define EMU_HANA_DOCK_LEDS_3 0x0f /* 0xxxxxx 6 bit Audio Dock LEDs */ +#define EMU_HANA_DOCK_LEDS_3_CLIP_A 0x01 /* Mic A Clip LED on */ +#define EMU_HANA_DOCK_LEDS_3_CLIP_B 0x02 /* Mic B Clip LED on */ +#define EMU_HANA_DOCK_LEDS_3_SIGNAL_A 0x04 /* Signal A Clip LED on */ +#define EMU_HANA_DOCK_LEDS_3_SIGNAL_B 0x08 /* Signal B Clip LED on */ +#define EMU_HANA_DOCK_LEDS_3_MANUAL_CLIP 0x10 /* Manual Clip detection */ +#define EMU_HANA_DOCK_LEDS_3_MANUAL_SIGNAL 0x20 /* Manual Signal detection */ + +#define EMU_HANA_DOCK_PADS 0x10 /* 0000xxx 3 bit Audio Dock ADC 14dB pads */ +#define EMU_HANA_DOCK_PAD1 0x01 /* 14dB Attenuation on ADC 1 */ +#define EMU_HANA_DOCK_PAD2 0x02 /* 14dB Attenuation on ADC 2 */ +#define EMU_HANA_DOCK_PAD3 0x04 /* 14dB Attenuation on ADC 3 */ + +#define EMU_HANA_DOCK_MISC 0x11 /* 0xxxxxx 6 bit Audio Dock misc bits */ +#define EMU_HANA_DOCK_DAC1_MUTE 0x01 /* DAC 1 Mute */ +#define EMU_HANA_DOCK_DAC2_MUTE 0x02 /* DAC 2 Mute */ +#define EMU_HANA_DOCK_DAC3_MUTE 0x04 /* DAC 3 Mute */ +#define EMU_HANA_DOCK_DAC4_MUTE 0x08 /* DAC 4 Mute */ +#define EMU_HANA_DOCK_PHONES_192_DAC1 0x00 /* DAC 1 Headphones source at 192kHz */ +#define EMU_HANA_DOCK_PHONES_192_DAC2 0x10 /* DAC 2 Headphones source at 192kHz */ +#define EMU_HANA_DOCK_PHONES_192_DAC3 0x20 /* DAC 3 Headphones source at 192kHz */ +#define EMU_HANA_DOCK_PHONES_192_DAC4 0x30 /* DAC 4 Headphones source at 192kHz */ + +#define EMU_HANA_UNKNOWN12 0x12 /* 0xxxxxx 6 bit Unknown12 */ +#define EMU_HANA_UNKNOWN13 0x13 /* 0xxxxxx 6 bit Unknown13 */ +/* 0x14 - 0x1f Unused R/W registers */ +#define EMU_HANA_IRQ_STATUS 0x20 /* 000xxxx 4 bits IRQ Status */ +#if 0 /* Already defined for reg 0x09 IRQ_ENABLE */ +#define EMU_HANA_IRQ_WCLK_CHANGED 0x01 +#define EMU_HANA_IRQ_ADAT 0x02 +#define EMU_HANA_IRQ_DOCK 0x04 +#define EMU_HANA_IRQ_DOCK_LOST 0x08 +#endif + +#define EMU_HANA_OPTION_CARDS 0x21 /* 000xxxx 4 bits Presence of option cards */ +#define EMU_HANA_OPTION_HAMOA 0x01 /* HAMOA card present */ +#define EMU_HANA_OPTION_SYNC 0x02 /* Sync card present */ +#define EMU_HANA_OPTION_DOCK_ONLINE 0x04 /* Audio Dock online and FPGA configured */ +#define EMU_HANA_OPTION_DOCK_OFFLINE 0x08 /* Audio Dock online and FPGA not configured */ + +#define EMU_HANA_ID 0x22 /* 1010101 7 bits ID byte & 0x7f = 0x55 */ + +#define EMU_HANA_MAJOR_REV 0x23 /* 0000xxx 3 bit Hana FPGA Major rev */ +#define EMU_HANA_MINOR_REV 0x24 /* 0000xxx 3 bit Hana FPGA Minor rev */ + +#define EMU_DOCK_MAJOR_REV 0x25 /* 0000xxx 3 bit Audio Dock FPGA Major rev */ +#define EMU_DOCK_MINOR_REV 0x26 /* 0000xxx 3 bit Audio Dock FPGA Minor rev */ + +#define EMU_DOCK_BOARD_ID 0x27 /* 00000xx 2 bits Audio Dock ID pins */ +#define EMU_DOCK_BOARD_ID0 0x00 /* ID bit 0 */ +#define EMU_DOCK_BOARD_ID1 0x03 /* ID bit 1 */ + +#define EMU_HANA_WC_SPDIF_HI 0x28 /* 0xxxxxx 6 bit SPDIF IN Word clock, upper 6 bits */ +#define EMU_HANA_WC_SPDIF_LO 0x29 /* 0xxxxxx 6 bit SPDIF IN Word clock, lower 6 bits */ + +#define EMU_HANA_WC_ADAT_HI 0x2a /* 0xxxxxx 6 bit ADAT IN Word clock, upper 6 bits */ +#define EMU_HANA_WC_ADAT_LO 0x2b /* 0xxxxxx 6 bit ADAT IN Word clock, lower 6 bits */ + +#define EMU_HANA_WC_BNC_LO 0x2c /* 0xxxxxx 6 bit BNC IN Word clock, lower 6 bits */ +#define EMU_HANA_WC_BNC_HI 0x2d /* 0xxxxxx 6 bit BNC IN Word clock, upper 6 bits */ + +#define EMU_HANA2_WC_SPDIF_HI 0x2e /* 0xxxxxx 6 bit HANA2 SPDIF IN Word clock, upper 6 bits */ +#define EMU_HANA2_WC_SPDIF_LO 0x2f /* 0xxxxxx 6 bit HANA2 SPDIF IN Word clock, lower 6 bits */ +/* 0x30 - 0x3f Unused Read only registers */ + +/************************************************************************************************/ +/* EMU1010m HANA Destinations */ +/************************************************************************************************/ +#define EMU_DST_ALICE2_EMU32_0 0x000f /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_1 0x0000 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_2 0x0001 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_3 0x0002 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_4 0x0003 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_5 0x0004 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_6 0x0005 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_7 0x0006 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_8 0x0007 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_9 0x0008 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_A 0x0009 /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_B 0x000a /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_C 0x000b /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_D 0x000c /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_E 0x000d /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_ALICE2_EMU32_F 0x000e /* 16 EMU32 channels to Alice2 +0 to +0xf */ +#define EMU_DST_DOCK_DAC1_LEFT1 0x0100 /* Audio Dock DAC1 Left, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC1_LEFT2 0x0101 /* Audio Dock DAC1 Left, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC1_LEFT3 0x0102 /* Audio Dock DAC1 Left, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC1_LEFT4 0x0103 /* Audio Dock DAC1 Left, 4th or 192kHz */ +#define EMU_DST_DOCK_DAC1_RIGHT1 0x0104 /* Audio Dock DAC1 Right, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC1_RIGHT2 0x0105 /* Audio Dock DAC1 Right, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC1_RIGHT3 0x0106 /* Audio Dock DAC1 Right, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC1_RIGHT4 0x0107 /* Audio Dock DAC1 Right, 4th or 192kHz */ +#define EMU_DST_DOCK_DAC2_LEFT1 0x0108 /* Audio Dock DAC2 Left, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC2_LEFT2 0x0109 /* Audio Dock DAC2 Left, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC2_LEFT3 0x010a /* Audio Dock DAC2 Left, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC2_LEFT4 0x010b /* Audio Dock DAC2 Left, 4th or 192kHz */ +#define EMU_DST_DOCK_DAC2_RIGHT1 0x010c /* Audio Dock DAC2 Right, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC2_RIGHT2 0x010d /* Audio Dock DAC2 Right, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC2_RIGHT3 0x010e /* Audio Dock DAC2 Right, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC2_RIGHT4 0x010f /* Audio Dock DAC2 Right, 4th or 192kHz */ +#define EMU_DST_DOCK_DAC3_LEFT1 0x0110 /* Audio Dock DAC1 Left, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC3_LEFT2 0x0111 /* Audio Dock DAC1 Left, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC3_LEFT3 0x0112 /* Audio Dock DAC1 Left, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC3_LEFT4 0x0113 /* Audio Dock DAC1 Left, 4th or 192kHz */ +#define EMU_DST_DOCK_PHONES_LEFT1 0x0112 /* Audio Dock PHONES Left, 1st or 48kHz only */ +#define EMU_DST_DOCK_PHONES_LEFT2 0x0113 /* Audio Dock PHONES Left, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC3_RIGHT1 0x0114 /* Audio Dock DAC1 Right, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC3_RIGHT2 0x0115 /* Audio Dock DAC1 Right, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC3_RIGHT3 0x0116 /* Audio Dock DAC1 Right, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC3_RIGHT4 0x0117 /* Audio Dock DAC1 Right, 4th or 192kHz */ +#define EMU_DST_DOCK_PHONES_RIGHT1 0x0116 /* Audio Dock PHONES Right, 1st or 48kHz only */ +#define EMU_DST_DOCK_PHONES_RIGHT2 0x0117 /* Audio Dock PHONES Right, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC4_LEFT1 0x0118 /* Audio Dock DAC2 Left, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC4_LEFT2 0x0119 /* Audio Dock DAC2 Left, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC4_LEFT3 0x011a /* Audio Dock DAC2 Left, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC4_LEFT4 0x011b /* Audio Dock DAC2 Left, 4th or 192kHz */ +#define EMU_DST_DOCK_SPDIF_LEFT1 0x011a /* Audio Dock SPDIF Left, 1st or 48kHz only */ +#define EMU_DST_DOCK_SPDIF_LEFT2 0x011b /* Audio Dock SPDIF Left, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC4_RIGHT1 0x011c /* Audio Dock DAC2 Right, 1st or 48kHz only */ +#define EMU_DST_DOCK_DAC4_RIGHT2 0x011d /* Audio Dock DAC2 Right, 2nd or 96kHz */ +#define EMU_DST_DOCK_DAC4_RIGHT3 0x011e /* Audio Dock DAC2 Right, 3rd or 192kHz */ +#define EMU_DST_DOCK_DAC4_RIGHT4 0x011f /* Audio Dock DAC2 Right, 4th or 192kHz */ +#define EMU_DST_DOCK_SPDIF_RIGHT1 0x011e /* Audio Dock SPDIF Right, 1st or 48kHz only */ +#define EMU_DST_DOCK_SPDIF_RIGHT2 0x011f /* Audio Dock SPDIF Right, 2nd or 96kHz */ +#define EMU_DST_HANA_SPDIF_LEFT1 0x0200 /* Hana SPDIF Left, 1st or 48kHz only */ +#define EMU_DST_HANA_SPDIF_LEFT2 0x0202 /* Hana SPDIF Left, 2nd or 96kHz */ +#define EMU_DST_HANA_SPDIF_RIGHT1 0x0201 /* Hana SPDIF Right, 1st or 48kHz only */ +#define EMU_DST_HANA_SPDIF_RIGHT2 0x0203 /* Hana SPDIF Right, 2nd or 96kHz */ +#define EMU_DST_HAMOA_DAC_LEFT1 0x0300 /* Hamoa DAC Left, 1st or 48kHz only */ +#define EMU_DST_HAMOA_DAC_LEFT2 0x0302 /* Hamoa DAC Left, 2nd or 96kHz */ +#define EMU_DST_HAMOA_DAC_LEFT3 0x0304 /* Hamoa DAC Left, 3rd or 192kHz */ +#define EMU_DST_HAMOA_DAC_LEFT4 0x0306 /* Hamoa DAC Left, 4th or 192kHz */ +#define EMU_DST_HAMOA_DAC_RIGHT1 0x0301 /* Hamoa DAC Right, 1st or 48kHz only */ +#define EMU_DST_HAMOA_DAC_RIGHT2 0x0303 /* Hamoa DAC Right, 2nd or 96kHz */ +#define EMU_DST_HAMOA_DAC_RIGHT3 0x0305 /* Hamoa DAC Right, 3rd or 192kHz */ +#define EMU_DST_HAMOA_DAC_RIGHT4 0x0307 /* Hamoa DAC Right, 4th or 192kHz */ +#define EMU_DST_HANA_ADAT 0x0400 /* Hana ADAT 8 channel out +0 to +7 */ +#define EMU_DST_ALICE_I2S0_LEFT 0x0500 /* Alice2 I2S0 Left */ +#define EMU_DST_ALICE_I2S0_RIGHT 0x0501 /* Alice2 I2S0 Right */ +#define EMU_DST_ALICE_I2S1_LEFT 0x0600 /* Alice2 I2S1 Left */ +#define EMU_DST_ALICE_I2S1_RIGHT 0x0601 /* Alice2 I2S1 Right */ +#define EMU_DST_ALICE_I2S2_LEFT 0x0700 /* Alice2 I2S2 Left */ +#define EMU_DST_ALICE_I2S2_RIGHT 0x0701 /* Alice2 I2S2 Right */ + +/************************************************************************************************/ +/* EMU1010m HANA Sources */ +/************************************************************************************************/ +#define EMU_SRC_SILENCE 0x0000 /* Silence */ +#define EMU_SRC_DOCK_MIC_A1 0x0100 /* Audio Dock Mic A, 1st or 48kHz only */ +#define EMU_SRC_DOCK_MIC_A2 0x0101 /* Audio Dock Mic A, 2nd or 96kHz */ +#define EMU_SRC_DOCK_MIC_A3 0x0102 /* Audio Dock Mic A, 3rd or 192kHz */ +#define EMU_SRC_DOCK_MIC_A4 0x0103 /* Audio Dock Mic A, 4th or 192kHz */ +#define EMU_SRC_DOCK_MIC_B1 0x0104 /* Audio Dock Mic B, 1st or 48kHz only */ +#define EMU_SRC_DOCK_MIC_B2 0x0105 /* Audio Dock Mic B, 2nd or 96kHz */ +#define EMU_SRC_DOCK_MIC_B3 0x0106 /* Audio Dock Mic B, 3rd or 192kHz */ +#define EMU_SRC_DOCK_MIC_B4 0x0107 /* Audio Dock Mic B, 4th or 192kHz */ +#define EMU_SRC_DOCK_ADC1_LEFT1 0x0108 /* Audio Dock ADC1 Left, 1st or 48kHz only */ +#define EMU_SRC_DOCK_ADC1_LEFT2 0x0109 /* Audio Dock ADC1 Left, 2nd or 96kHz */ +#define EMU_SRC_DOCK_ADC1_LEFT3 0x010a /* Audio Dock ADC1 Left, 3rd or 192kHz */ +#define EMU_SRC_DOCK_ADC1_LEFT4 0x010b /* Audio Dock ADC1 Left, 4th or 192kHz */ +#define EMU_SRC_DOCK_ADC1_RIGHT1 0x010c /* Audio Dock ADC1 Right, 1st or 48kHz only */ +#define EMU_SRC_DOCK_ADC1_RIGHT2 0x010d /* Audio Dock ADC1 Right, 2nd or 96kHz */ +#define EMU_SRC_DOCK_ADC1_RIGHT3 0x010e /* Audio Dock ADC1 Right, 3rd or 192kHz */ +#define EMU_SRC_DOCK_ADC1_RIGHT4 0x010f /* Audio Dock ADC1 Right, 4th or 192kHz */ +#define EMU_SRC_DOCK_ADC2_LEFT1 0x0110 /* Audio Dock ADC2 Left, 1st or 48kHz only */ +#define EMU_SRC_DOCK_ADC2_LEFT2 0x0111 /* Audio Dock ADC2 Left, 2nd or 96kHz */ +#define EMU_SRC_DOCK_ADC2_LEFT3 0x0112 /* Audio Dock ADC2 Left, 3rd or 192kHz */ +#define EMU_SRC_DOCK_ADC2_LEFT4 0x0113 /* Audio Dock ADC2 Left, 4th or 192kHz */ +#define EMU_SRC_DOCK_ADC2_RIGHT1 0x0114 /* Audio Dock ADC2 Right, 1st or 48kHz only */ +#define EMU_SRC_DOCK_ADC2_RIGHT2 0x0115 /* Audio Dock ADC2 Right, 2nd or 96kHz */ +#define EMU_SRC_DOCK_ADC2_RIGHT3 0x0116 /* Audio Dock ADC2 Right, 3rd or 192kHz */ +#define EMU_SRC_DOCK_ADC2_RIGHT4 0x0117 /* Audio Dock ADC2 Right, 4th or 192kHz */ +#define EMU_SRC_DOCK_ADC3_LEFT1 0x0118 /* Audio Dock ADC3 Left, 1st or 48kHz only */ +#define EMU_SRC_DOCK_ADC3_LEFT2 0x0119 /* Audio Dock ADC3 Left, 2nd or 96kHz */ +#define EMU_SRC_DOCK_ADC3_LEFT3 0x011a /* Audio Dock ADC3 Left, 3rd or 192kHz */ +#define EMU_SRC_DOCK_ADC3_LEFT4 0x011b /* Audio Dock ADC3 Left, 4th or 192kHz */ +#define EMU_SRC_DOCK_ADC3_RIGHT1 0x011c /* Audio Dock ADC3 Right, 1st or 48kHz only */ +#define EMU_SRC_DOCK_ADC3_RIGHT2 0x011d /* Audio Dock ADC3 Right, 2nd or 96kHz */ +#define EMU_SRC_DOCK_ADC3_RIGHT3 0x011e /* Audio Dock ADC3 Right, 3rd or 192kHz */ +#define EMU_SRC_DOCK_ADC3_RIGHT4 0x011f /* Audio Dock ADC3 Right, 4th or 192kHz */ +#define EMU_SRC_HAMOA_ADC_LEFT1 0x0200 /* Hamoa ADC Left, 1st or 48kHz only */ +#define EMU_SRC_HAMOA_ADC_LEFT2 0x0202 /* Hamoa ADC Left, 2nd or 96kHz */ +#define EMU_SRC_HAMOA_ADC_LEFT3 0x0204 /* Hamoa ADC Left, 3rd or 192kHz */ +#define EMU_SRC_HAMOA_ADC_LEFT4 0x0206 /* Hamoa ADC Left, 4th or 192kHz */ +#define EMU_SRC_HAMOA_ADC_RIGHT1 0x0201 /* Hamoa ADC Right, 1st or 48kHz only */ +#define EMU_SRC_HAMOA_ADC_RIGHT2 0x0203 /* Hamoa ADC Right, 2nd or 96kHz */ +#define EMU_SRC_HAMOA_ADC_RIGHT3 0x0205 /* Hamoa ADC Right, 3rd or 192kHz */ +#define EMU_SRC_HAMOA_ADC_RIGHT4 0x0207 /* Hamoa ADC Right, 4th or 192kHz */ +#define EMU_SRC_ALICE_EMU32A 0x0300 /* Alice2 EMU32a 16 outputs. +0 to +0xf */ +#define EMU_SRC_ALICE_EMU32B 0x0310 /* Alice2 EMU32b 16 outputs. +0 to +0xf */ +#define EMU_SRC_HANA_ADAT 0x0400 /* Hana ADAT 8 channel in +0 to +7 */ +#define EMU_SRC_HANA_SPDIF_LEFT1 0x0500 /* Hana SPDIF Left, 1st or 48kHz only */ +#define EMU_SRC_HANA_SPDIF_LEFT2 0x0502 /* Hana SPDIF Left, 2nd or 96kHz */ +#define EMU_SRC_HANA_SPDIF_RIGHT1 0x0501 /* Hana SPDIF Right, 1st or 48kHz only */ +#define EMU_SRC_HANA_SPDIF_RIGHT2 0x0503 /* Hana SPDIF Right, 2nd or 96kHz */ +/* 0x600 and 0x700 no used */ /* ------------------- STRUCTURES -------------------- */ @@ -1063,7 +1365,7 @@ struct snd_emu_chip_details { unsigned char spdif_bug; /* Has Spdif phasing bug */ unsigned char ac97_chip; /* Has an AC97 chip: 1 = mandatory, 2 = optional */ unsigned char ecard; /* APS EEPROM */ - unsigned char emu1212m; /* EMU 1212m card */ + unsigned char emu1010; /* EMU 1010m card */ unsigned char spi_dac; /* SPI interface for DAC */ unsigned char i2c_adc; /* I2C interface for ADC */ unsigned char adc_1361t; /* Use Philips 1361T ADC */ @@ -1072,6 +1374,11 @@ struct snd_emu_chip_details { const char *id; /* for backward compatibility - can be NULL if not needed */ }; +struct snd_emu1010 { + unsigned int output_source[64]; + unsigned int input_source[64]; +}; + struct snd_emu10k1 { int irq; @@ -1132,6 +1439,7 @@ struct snd_emu10k1 { int p16v_device_offset; u32 p16v_capture_source; u32 p16v_capture_channel; + struct snd_emu1010 emu1010; struct snd_emu10k1_pcm_mixer pcm_mixer[32]; struct snd_emu10k1_pcm_mixer efx_pcm_mixer[NUM_EFX_PLAYBACK]; struct snd_kcontrol *ctl_send_routing; @@ -1208,6 +1516,9 @@ void snd_emu10k1_ptr_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned i unsigned int snd_emu10k1_ptr20_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn); void snd_emu10k1_ptr20_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data); int snd_emu10k1_spi_write(struct snd_emu10k1 * emu, unsigned int data); +int snd_emu1010_fpga_write(struct snd_emu10k1 * emu, int reg, int value); +int snd_emu1010_fpga_read(struct snd_emu10k1 * emu, int reg, int *value); +int snd_emu1010_fpga_link_dst_src_write(struct snd_emu10k1 * emu, int dst, int src); unsigned int snd_emu10k1_efx_read(struct snd_emu10k1 *emu, unsigned int pc); void snd_emu10k1_intr_enable(struct snd_emu10k1 *emu, unsigned int intrenb); void snd_emu10k1_intr_disable(struct snd_emu10k1 *emu, unsigned int intrenb); -- cgit v1.2.3 From a58e7cb16dfae8a3c1c98a7ab7ca02a9e9b38921 Mon Sep 17 00:00:00 2001 From: Jochen Voss Date: Wed, 4 Oct 2006 18:04:10 +0200 Subject: [ALSA] Enable capture from line-in and CD on Revolution 5.1 Enable capture from line-in and CD on the Revolution 5.1 card. This patch adds support for switching between the 5 input channels of the AK5365 ADC and modifies the Revolution 5.1 driver to make use of this facility. Previously the capture channel was fixed to channel 0 (microphone on the Revolution 5.1 card). Signed-off-by: Jochen Voss Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ak4xxx-adda.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/ak4xxx-adda.h b/include/sound/ak4xxx-adda.h index d0deca669b9..d01d5352801 100644 --- a/include/sound/ak4xxx-adda.h +++ b/include/sound/ak4xxx-adda.h @@ -50,6 +50,8 @@ struct snd_akm4xxx_adc_channel { char *name; /* capture gain volume label */ char *switch_name; /* capture switch */ unsigned int num_channels; + char *selector_name; /* capture source select label */ + const char **input_names; /* capture source names (NULL terminated) */ }; struct snd_akm4xxx { -- cgit v1.2.3 From feaa6a74d852be40c0e717471aa92eead012052c Mon Sep 17 00:00:00 2001 From: Jochen Voss Date: Wed, 4 Oct 2006 18:08:43 +0200 Subject: [ALSA] Enable the analog loopback of the Revolution 5.1 Enable the analog loopback of the Revolution 5.1 card. This patch adds support for the PT2258 volume controller and modifies the Revolution 5.1 driver to make use of this facility. This allows to control the analog loopback of the card. Signed-off-by: Jochen Voss Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/pt2258.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 include/sound/pt2258.h (limited to 'include') diff --git a/include/sound/pt2258.h b/include/sound/pt2258.h new file mode 100644 index 00000000000..160f812faa4 --- /dev/null +++ b/include/sound/pt2258.h @@ -0,0 +1,37 @@ +/* + * ALSA Driver for the PT2258 volume controller. + * + * Copyright (c) 2006 Jochen Voss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __SOUND_PT2258_H +#define __SOUND_PT2258_H + +struct snd_pt2258 { + struct snd_card *card; + struct snd_i2c_bus *i2c_bus; + struct snd_i2c_device *i2c_dev; + + unsigned char volume[6]; + int mute; +}; + +extern int snd_pt2258_reset(struct snd_pt2258 *pt); +extern int snd_pt2258_build_controls(struct snd_pt2258 *pt); + +#endif /* __SOUND_PT2258_H */ -- cgit v1.2.3 From 12b131c4cf3eb1dc8a60082a434b7b100774c2e7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 5 Oct 2006 15:05:34 +0200 Subject: [ALSA] allow registering an alsa device with struct device pointer This patch adds snd_register_device_for_dev taking a struct device pointer to link the new device to and makes snd_register_device a simple static inline wrapper around it. Signed-off-by: Johannes Berg Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/core.h | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/sound/core.h b/include/sound/core.h index 521f036cce9..83a575a29d0 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -211,9 +211,40 @@ extern struct class *sound_class; void snd_request_card(int card); -int snd_register_device(int type, struct snd_card *card, int dev, - const struct file_operations *f_ops, void *private_data, - const char *name); +int snd_register_device_for_dev(int type, struct snd_card *card, + int dev, + const struct file_operations *f_ops, + void *private_data, + const char *name, + struct device *device); + +/** + * snd_register_device - Register the ALSA device file for the card + * @type: the device type, SNDRV_DEVICE_TYPE_XXX + * @card: the card instance + * @dev: the device index + * @f_ops: the file operations + * @private_data: user pointer for f_ops->open() + * @name: the device file name + * + * Registers an ALSA device file for the given card. + * The operators have to be set in reg parameter. + * + * This function uses the card's device pointer to link to the + * correct &struct device. + * + * Returns zero if successful, or a negative error code on failure. + */ +static inline int snd_register_device(int type, struct snd_card *card, int dev, + const struct file_operations *f_ops, + void *private_data, + const char *name) +{ + return snd_register_device_for_dev(type, card, dev, f_ops, + private_data, name, + card ? card->dev : NULL); +} + int snd_unregister_device(int type, struct snd_card *card, int dev); void *snd_lookup_minor_data(unsigned int minor, int type); int snd_add_device_sysfs_file(int type, struct snd_card *card, int dev, -- cgit v1.2.3 From c78085fcd2ce7cd036e1488472eb41a64d70949a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 5 Oct 2006 15:06:34 +0200 Subject: [ALSA] alsa core: add struct device pointer to struct snd_pcm This patch adds a struct device pointer to struct snd_pcm in order to be able to give it a different device than the card. It defaults to the card's device, however, so it should behave identically for drivers not touching the field. Signed-off-by: Johannes Berg Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/pcm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 2f645dfd7f7..016c41893b0 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -427,6 +427,7 @@ struct snd_pcm { wait_queue_head_t open_wait; void *private_data; void (*private_free) (struct snd_pcm *pcm); + struct device *dev; /* actual hw device this belongs to */ #if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE) struct snd_pcm_oss oss; #endif -- cgit v1.2.3 From c7132aeb72ad1106dc76279de4d005f9e1c5815c Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 6 Oct 2006 15:12:29 +0200 Subject: [ALSA] pcm core: add prealloc_max file to substream directory to show maximum DMA size Users ask us many times about the maximum DMA size for PCM devices. This file gives them a hint in KB. Signed-off-by: Jaroslav Kysela --- include/sound/pcm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 016c41893b0..ec006ed8cd5 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -384,6 +384,7 @@ struct snd_pcm_substream { struct snd_info_entry *proc_sw_params_entry; struct snd_info_entry *proc_status_entry; struct snd_info_entry *proc_prealloc_entry; + struct snd_info_entry *proc_prealloc_max_entry; #endif /* misc flags */ unsigned int hw_opened: 1; -- cgit v1.2.3 From 808db4a4512bedd45b62de255f7eedb5d5b788b9 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 6 Oct 2006 18:20:14 +0200 Subject: [ALSA] ASoC: core and dapm headers This patch adds the ASoC and DAPM headers. Features:- o Defines Digital Audio Interface (DAI) API o Defines Codec, Platform and Machine API o Defines Dynamic Audio Power Management API Signed-off-by: Richard Purdie Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ac97_codec.h | 1 + include/sound/soc-dapm.h | 286 +++++++++++++++++++++++++++ include/sound/soc.h | 480 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 767 insertions(+) create mode 100644 include/sound/soc-dapm.h create mode 100644 include/sound/soc.h (limited to 'include') diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 33720397a90..5f7c78d9e37 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -425,6 +425,7 @@ struct snd_ac97_build_ops { struct snd_ac97_bus_ops { void (*reset) (struct snd_ac97 *ac97); + void (*warm_reset)(struct snd_ac97 *ac97); void (*write) (struct snd_ac97 *ac97, unsigned short reg, unsigned short val); unsigned short (*read) (struct snd_ac97 *ac97, unsigned short reg); void (*wait) (struct snd_ac97 *ac97); diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h new file mode 100644 index 00000000000..2b1ae8edc43 --- /dev/null +++ b/include/sound/soc-dapm.h @@ -0,0 +1,286 @@ +/* + * linux/sound/soc-dapm.h -- ALSA SoC Dynamic Audio Power Management + * + * Author: Liam Girdwood + * Created: Aug 11th 2005 + * Copyright: Wolfson Microelectronics. PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_SND_SOC_DAPM_H +#define __LINUX_SND_SOC_DAPM_H + +#include +#include +#include +#include + +/* widget has no PM register bit */ +#define SND_SOC_NOPM -1 + +/* + * SoC dynamic audio power managment + * + * We can have upto 4 power domains + * 1. Codec domain - VREF, VMID + * Usually controlled at codec probe/remove, although can be set + * at stream time if power is not needed for sidetone, etc. + * 2. Platform/Machine domain - physically connected inputs and outputs + * Is platform/machine and user action specific, is set in the machine + * driver and by userspace e.g when HP are inserted + * 3. Path domain - Internal codec path mixers + * Are automatically set when mixer and mux settings are + * changed by the user. + * 4. Stream domain - DAC's and ADC's. + * Enabled when stream playback/capture is started. + */ + +/* codec domain */ +#define SND_SOC_DAPM_VMID(wname) \ +{ .id = snd_soc_dapm_vmid, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0} + +/* platform domain */ +#define SND_SOC_DAPM_INPUT(wname) \ +{ .id = snd_soc_dapm_input, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0} +#define SND_SOC_DAPM_OUTPUT(wname) \ +{ .id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0} +#define SND_SOC_DAPM_MIC(wname, wevent) \ +{ .id = snd_soc_dapm_mic, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD} +#define SND_SOC_DAPM_HP(wname, wevent) \ +{ .id = snd_soc_dapm_hp, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} +#define SND_SOC_DAPM_SPK(wname, wevent) \ +{ .id = snd_soc_dapm_spk, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} +#define SND_SOC_DAPM_LINE(wname, wevent) \ +{ .id = snd_soc_dapm_line, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} + +/* path domain */ +#define SND_SOC_DAPM_PGA(wname, wreg, wshift, winvert,\ + wcontrols, wncontrols) \ +{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} +#define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \ + wcontrols, wncontrols)\ +{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} +#define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \ +{ .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = NULL, .num_kcontrols = 0} +#define SND_SOC_DAPM_SWITCH(wname, wreg, wshift, winvert, wcontrols) \ +{ .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1} +#define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \ +{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1} + +/* path domain with event - event handler must return 0 for success */ +#define SND_SOC_DAPM_PGA_E(wname, wreg, wshift, winvert, wcontrols, \ + wncontrols, wevent, wflags) \ +{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ + .event = wevent, .event_flags = wflags} +#define SND_SOC_DAPM_MIXER_E(wname, wreg, wshift, winvert, wcontrols, \ + wncontrols, wevent, wflags) \ +{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ + .event = wevent, .event_flags = wflags} +#define SND_SOC_DAPM_MICBIAS_E(wname, wreg, wshift, winvert, wevent, wflags) \ +{ .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = NULL, .num_kcontrols = 0, \ + .event = wevent, .event_flags = wflags} +#define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \ + wevent, wflags) \ +{ .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1 \ + .event = wevent, .event_flags = wflags} +#define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \ + wevent, wflags) \ +{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \ + .event = wevent, .event_flags = wflags} + +/* events that are pre and post DAPM */ +#define SND_SOC_DAPM_PRE(wname, wevent) \ +{ .id = snd_soc_dapm_pre, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD} +#define SND_SOC_DAPM_POST(wname, wevent) \ +{ .id = snd_soc_dapm_post, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD} + +/* stream domain */ +#define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \ +{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \ + .shift = wshift, .invert = winvert} +#define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \ +{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \ + .shift = wshift, .invert = winvert} + +/* dapm kcontrol types */ +#define SOC_DAPM_SINGLE(xname, reg, shift, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, \ + .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, mask, invert) } +#define SOC_DAPM_DOUBLE(xname, reg, shift_left, shift_right, mask, invert, \ + power) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ + .info = snd_soc_info_volsw, \ + .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \ + .private_value = (reg) | ((shift_left) << 8) | ((shift_right) << 12) |\ + ((mask) << 16) | ((invert) << 24) } +#define SOC_DAPM_ENUM(xname, xenum) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_enum_double, \ + .get = snd_soc_dapm_get_enum_double, \ + .put = snd_soc_dapm_put_enum_double, \ + .private_value = (unsigned long)&xenum } + +/* dapm stream operations */ +#define SND_SOC_DAPM_STREAM_NOP 0x0 +#define SND_SOC_DAPM_STREAM_START 0x1 +#define SND_SOC_DAPM_STREAM_STOP 0x2 +#define SND_SOC_DAPM_STREAM_SUSPEND 0x4 +#define SND_SOC_DAPM_STREAM_RESUME 0x8 +#define SND_SOC_DAPM_STREAM_PAUSE_PUSH 0x10 +#define SND_SOC_DAPM_STREAM_PAUSE_RELEASE 0x20 + +/* dapm event types */ +#define SND_SOC_DAPM_PRE_PMU 0x1 /* before widget power up */ +#define SND_SOC_DAPM_POST_PMU 0x2 /* after widget power up */ +#define SND_SOC_DAPM_PRE_PMD 0x4 /* before widget power down */ +#define SND_SOC_DAPM_POST_PMD 0x8 /* after widget power down */ +#define SND_SOC_DAPM_PRE_REG 0x10 /* before audio path setup */ +#define SND_SOC_DAPM_POST_REG 0x20 /* after audio path setup */ + +/* convenience event type detection */ +#define SND_SOC_DAPM_EVENT_ON(e) \ + (e & (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU)) +#define SND_SOC_DAPM_EVENT_OFF(e) \ + (e & (SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)) + +struct snd_soc_dapm_widget; +enum snd_soc_dapm_type; +struct snd_soc_dapm_path; +struct snd_soc_dapm_pin; + +/* dapm controls */ +int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_dapm_get_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_dapm_get_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_dapm_new_control(struct snd_soc_codec *codec, + const struct snd_soc_dapm_widget *widget); + +/* dapm path setup */ +int snd_soc_dapm_connect_input(struct snd_soc_codec *codec, + const char *sink_name, const char *control_name, const char *src_name); +int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec); +void snd_soc_dapm_free(struct snd_soc_device *socdev); + +/* dapm events */ +int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream, + int event); + +/* dapm sys fs - used by the core */ +int snd_soc_dapm_sys_add(struct device *dev); + +/* dapm audio endpoint control */ +int snd_soc_dapm_set_endpoint(struct snd_soc_codec *codec, + char *pin, int status); +int snd_soc_dapm_sync_endpoints(struct snd_soc_codec *codec); + +/* dapm widget types */ +enum snd_soc_dapm_type { + snd_soc_dapm_input = 0, /* input pin */ + snd_soc_dapm_output, /* output pin */ + snd_soc_dapm_mux, /* selects 1 analog signal from many inputs */ + snd_soc_dapm_mixer, /* mixes several analog signals together */ + snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */ + snd_soc_dapm_adc, /* analog to digital converter */ + snd_soc_dapm_dac, /* digital to analog converter */ + snd_soc_dapm_micbias, /* microphone bias (power) */ + snd_soc_dapm_mic, /* microphone */ + snd_soc_dapm_hp, /* headphones */ + snd_soc_dapm_spk, /* speaker */ + snd_soc_dapm_line, /* line input/output */ + snd_soc_dapm_switch, /* analog switch */ + snd_soc_dapm_vmid, /* codec bias/vmid - to minimise pops */ + snd_soc_dapm_pre, /* machine specific pre widget - exec first */ + snd_soc_dapm_post, /* machine specific post widget - exec last */ +}; + +/* dapm audio path between two widgets */ +struct snd_soc_dapm_path { + char *name; + char *long_name; + + /* source (input) and sink (output) widgets */ + struct snd_soc_dapm_widget *source; + struct snd_soc_dapm_widget *sink; + struct snd_kcontrol *kcontrol; + + /* status */ + u32 connect:1; /* source and sink widgets are connected */ + u32 walked:1; /* path has been walked */ + + struct list_head list_source; + struct list_head list_sink; + struct list_head list; +}; + +/* dapm widget */ +struct snd_soc_dapm_widget { + enum snd_soc_dapm_type id; + char *name; /* widget name */ + char *sname; /* stream name */ + struct snd_soc_codec *codec; + struct list_head list; + + /* dapm control */ + short reg; /* negative reg = no direct dapm */ + unsigned char shift; /* bits to shift */ + unsigned int saved_value; /* widget saved value */ + unsigned int value; /* widget current value */ + unsigned char power:1; /* block power status */ + unsigned char invert:1; /* invert the power bit */ + unsigned char active:1; /* active stream on DAC, ADC's */ + unsigned char connected:1; /* connected codec pin */ + unsigned char new:1; /* cnew complete */ + unsigned char ext:1; /* has external widgets */ + unsigned char muted:1; /* muted for pop reduction */ + unsigned char suspend:1; /* was active before suspend */ + unsigned char pmdown:1; /* waiting for timeout */ + + /* external events */ + unsigned short event_flags; /* flags to specify event types */ + int (*event)(struct snd_soc_dapm_widget*, int); + + /* kcontrols that relate to this widget */ + int num_kcontrols; + const struct snd_kcontrol_new *kcontrols; + + /* widget input and outputs */ + struct list_head sources; + struct list_head sinks; +}; + +#endif diff --git a/include/sound/soc.h b/include/sound/soc.h new file mode 100644 index 00000000000..ecdd1fac94b --- /dev/null +++ b/include/sound/soc.h @@ -0,0 +1,480 @@ +/* + * linux/sound/soc.h -- ALSA SoC Layer + * + * Author: Liam Girdwood + * Created: Aug 11th 2005 + * Copyright: Wolfson Microelectronics. PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_SND_SOC_H +#define __LINUX_SND_SOC_H + +#include +#include +#include +#include +#include +#include +#include + +#define SND_SOC_VERSION "0.11.8" + +/* + * Convenience kcontrol builders + */ +#define SOC_SINGLE_VALUE(reg,shift,mask,invert) ((reg) | ((shift) << 8) |\ + ((shift) << 12) | ((mask) << 16) | ((invert) << 24)) +#define SOC_SINGLE_VALUE_EXT(reg,mask,invert) ((reg) | ((mask) << 16) |\ + ((invert) << 31)) +#define SOC_SINGLE(xname, reg, shift, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\ + .put = snd_soc_put_volsw, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, mask, invert) } +#define SOC_DOUBLE(xname, reg, shift_left, shift_right, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ + .info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \ + .put = snd_soc_put_volsw, \ + .private_value = (reg) | ((shift_left) << 8) | \ + ((shift_right) << 12) | ((mask) << 16) | ((invert) << 24) } +#define SOC_DOUBLE_R(xname, reg_left, reg_right, shift, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ + .info = snd_soc_info_volsw_2r, \ + .get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \ + .private_value = (reg_left) | ((shift) << 8) | \ + ((mask) << 12) | ((invert) << 20) | ((reg_right) << 24) } +#define SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xtexts) \ +{ .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \ + .mask = xmask, .texts = xtexts } +#define SOC_ENUM_SINGLE(xreg, xshift, xmask, xtexts) \ + SOC_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xtexts) +#define SOC_ENUM_SINGLE_EXT(xmask, xtexts) \ +{ .mask = xmask, .texts = xtexts } +#define SOC_ENUM(xname, xenum) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,\ + .info = snd_soc_info_enum_double, \ + .get = snd_soc_get_enum_double, .put = snd_soc_put_enum_double, \ + .private_value = (unsigned long)&xenum } +#define SOC_SINGLE_EXT(xname, xreg, xmask, xinvert,\ + xhandler_get, xhandler_put) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw_ext, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = SOC_SINGLE_VALUE_EXT(xreg, xmask, xinvert) } +#define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_bool_ext, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = xdata } +#define SOC_ENUM_EXT(xname, xenum, xhandler_get, xhandler_put) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_enum_ext, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&xenum } + +/* + * Digital Audio Interface (DAI) types + */ +#define SND_SOC_DAI_AC97 0x1 +#define SND_SOC_DAI_I2S 0x2 +#define SND_SOC_DAI_PCM 0x4 + +/* + * DAI hardware audio formats + */ +#define SND_SOC_DAIFMT_I2S (1 << 0) /* I2S mode */ +#define SND_SOC_DAIFMT_RIGHT_J (1 << 1) /* Right justified mode */ +#define SND_SOC_DAIFMT_LEFT_J (1 << 2) /* Left Justified mode */ +#define SND_SOC_DAIFMT_DSP_A (1 << 3) /* L data msb after FRM or LRC */ +#define SND_SOC_DAIFMT_DSP_B (1 << 4) /* L data msb during FRM or LRC */ +#define SND_SOC_DAIFMT_AC97 (1 << 5) /* AC97 */ + +/* + * DAI hardware signal inversions + */ +#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */ +#define SND_SOC_DAIFMT_NB_IF (1 << 9) /* normal bclk + inv frm */ +#define SND_SOC_DAIFMT_IB_NF (1 << 10) /* invert bclk + nor frm */ +#define SND_SOC_DAIFMT_IB_IF (1 << 11) /* invert bclk + frm */ + +/* + * DAI hardware clock masters + * This is wrt the codec, the inverse is true for the interface + * i.e. if the codec is clk and frm master then the interface is + * clk and frame slave. + */ +#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & frm master */ +#define SND_SOC_DAIFMT_CBS_CFM (1 << 13) /* codec clk slave & frm master */ +#define SND_SOC_DAIFMT_CBM_CFS (1 << 14) /* codec clk master & frame slave */ +#define SND_SOC_DAIFMT_CBS_CFS (1 << 15) /* codec clk & frm slave */ + +#define SND_SOC_DAIFMT_FORMAT_MASK 0x00ff +#define SND_SOC_DAIFMT_INV_MASK 0x0f00 +#define SND_SOC_DAIFMT_CLOCK_MASK 0xf000 + +/* + * DAI hardware audio direction + */ +#define SND_SOC_DAIDIR_PLAYBACK 0x1 +#define SND_SOC_DAIDIR_CAPTURE 0x2 + +/* + * DAI hardware Time Division Multiplexing (TDM) Slots + * Left and Right data word positions + * This is measured in words (sample size) and not bits. + */ +#define SND_SOC_DAITDM_LRDW(l,r) ((l << 8) | r) + +/* + * DAI hardware clock ratios + * bit clock can either be a generated by dividing mclk or + * by multiplying sample rate, hence there are 2 definitions below + * depending on codec type. + */ +/* ratio of sample rate to mclk/sysclk */ +#define SND_SOC_FS_ALL 0xffff /* all mclk supported */ + +/* bit clock dividers */ +#define SND_SOC_FSBD(x) (1 << (x - 1)) /* ratio mclk:bclk */ +#define SND_SOC_FSBD_REAL(x) (ffs(x)) +#define SND_SOC_FSBD_ALL 0xffff /* all bit clock dividers supported */ + +/* bit clock ratio to sample rate */ +#define SND_SOC_FSB(x) (1 << ((x - 16) / 16)) +#define SND_SOC_FSB_REAL(x) (((ffs(x) - 1) * 16) + 16) +/* all bclk ratios supported */ +#define SND_SOC_FSB_ALL SND_SOC_FSBD_ALL + +/* + * DAI hardware flags + */ +/* use bfs mclk divider mode, else sample rate ratio */ +#define SND_SOC_DAI_BFS_DIV 0x1 + +/* + * AC97 codec ID's bitmask + */ +#define SND_SOC_DAI_AC97_ID0 (1 << 0) +#define SND_SOC_DAI_AC97_ID1 (1 << 1) +#define SND_SOC_DAI_AC97_ID2 (1 << 2) +#define SND_SOC_DAI_AC97_ID3 (1 << 3) + +struct snd_soc_device; +struct snd_soc_pcm_stream; +struct snd_soc_ops; +struct snd_soc_dai_mode; +struct snd_soc_pcm_runtime; +struct snd_soc_codec_dai; +struct snd_soc_cpu_dai; +struct snd_soc_codec; +struct snd_soc_machine_config; +struct soc_enum; +struct snd_soc_ac97_ops; +struct snd_soc_clock_info; + +typedef int (*hw_write_t)(void *,const char* ,int); +typedef int (*hw_read_t)(void *,char* ,int); + +extern struct snd_ac97_bus_ops soc_ac97_ops; + +/* pcm <-> DAI connect */ +void snd_soc_free_pcms(struct snd_soc_device *socdev); +int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid); +int snd_soc_register_card(struct snd_soc_device *socdev); + +/* set runtime hw params */ +int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream, + const struct snd_pcm_hardware *hw); +int snd_soc_get_rate(int rate); + +/* codec IO */ +#define snd_soc_read(codec, reg) codec->read(codec, reg) +#define snd_soc_write(codec, reg, value) codec->write(codec, reg, value) + +/* codec register bit access */ +int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg, + unsigned short mask, unsigned short value); +int snd_soc_test_bits(struct snd_soc_codec *codec, unsigned short reg, + unsigned short mask, unsigned short value); + +int snd_soc_new_ac97_codec(struct snd_soc_codec *codec, + struct snd_ac97_bus_ops *ops, int num); +void snd_soc_free_ac97_codec(struct snd_soc_codec *codec); + +/* + *Controls + */ +struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template, + void *data, char *long_name); +int snd_soc_info_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_info_enum_ext(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_get_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_info_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_info_bool_ext(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_get_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_info_volsw_2r(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_get_volsw_2r(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); + +/* SoC PCM stream information */ +struct snd_soc_pcm_stream { + char *stream_name; + unsigned int rate_min; /* min rate */ + unsigned int rate_max; /* max rate */ + unsigned int channels_min; /* min channels */ + unsigned int channels_max; /* max channels */ + unsigned int active:1; /* stream is in use */ +}; + +/* SoC audio ops */ +struct snd_soc_ops { + int (*startup)(struct snd_pcm_substream *); + void (*shutdown)(struct snd_pcm_substream *); + int (*hw_params)(struct snd_pcm_substream *, struct snd_pcm_hw_params *); + int (*hw_free)(struct snd_pcm_substream *); + int (*prepare)(struct snd_pcm_substream *); + int (*trigger)(struct snd_pcm_substream *, int); +}; + +/* SoC DAI hardware mode */ +struct snd_soc_dai_mode { + u16 fmt; /* SND_SOC_DAIFMT_* */ + u16 tdm; /* SND_SOC_HWTDM_* */ + u64 pcmfmt; /* SNDRV_PCM_FMTBIT_* */ + u16 pcmrate; /* SND_SOC_HWRATE_* */ + u16 pcmdir:2; /* SND_SOC_HWDIR_* */ + u16 flags:8; /* hw flags */ + u16 fs; /* mclk to rate divider */ + u32 bfs; /* mclk to bclk dividers */ + unsigned long priv; /* private mode data */ +}; + +/* DAI capabilities */ +struct snd_soc_dai_cap { + int num_modes; /* number of DAI modes */ + struct snd_soc_dai_mode *mode; /* array of supported DAI modes */ +}; + +/* SoC Codec DAI */ +struct snd_soc_codec_dai { + char *name; + int id; + + /* DAI capabilities */ + struct snd_soc_pcm_stream playback; + struct snd_soc_pcm_stream capture; + struct snd_soc_dai_cap caps; + + /* DAI runtime info */ + struct snd_soc_dai_mode dai_runtime; + struct snd_soc_ops ops; + unsigned int (*config_sysclk)(struct snd_soc_codec_dai*, + struct snd_soc_clock_info *info, unsigned int clk); + int (*digital_mute)(struct snd_soc_codec *, + struct snd_soc_codec_dai*, int); + unsigned int mclk; /* the audio master clock */ + unsigned int pll_in; /* the PLL input clock */ + unsigned int pll_out; /* the PLL output clock */ + unsigned int clk_div; /* internal clock divider << 1 (for fractions) */ + unsigned int active; + unsigned char pop_wait:1; + + /* DAI private data */ + void *private_data; +}; + +/* SoC CPU DAI */ +struct snd_soc_cpu_dai { + + /* DAI description */ + char *name; + unsigned int id; + unsigned char type; + + /* DAI callbacks */ + int (*probe)(struct platform_device *pdev); + void (*remove)(struct platform_device *pdev); + int (*suspend)(struct platform_device *pdev, + struct snd_soc_cpu_dai *cpu_dai); + int (*resume)(struct platform_device *pdev, + struct snd_soc_cpu_dai *cpu_dai); + unsigned int (*config_sysclk)(struct snd_soc_cpu_dai *cpu_dai, + struct snd_soc_clock_info *info, unsigned int clk); + + /* DAI capabilities */ + struct snd_soc_pcm_stream capture; + struct snd_soc_pcm_stream playback; + struct snd_soc_dai_cap caps; + + /* DAI runtime info */ + struct snd_soc_dai_mode dai_runtime; + struct snd_soc_ops ops; + struct snd_pcm_runtime *runtime; + unsigned char active:1; + unsigned int mclk; + void *dma_data; + + /* DAI private data */ + void *private_data; +}; + +/* SoC Audio Codec */ +struct snd_soc_codec { + char *name; + struct module *owner; + struct mutex mutex; + + /* callbacks */ + int (*dapm_event)(struct snd_soc_codec *codec, int event); + + /* runtime */ + struct snd_card *card; + struct snd_ac97 *ac97; /* for ad-hoc ac97 devices */ + unsigned int active; + unsigned int pcm_devs; + void *private_data; + + /* codec IO */ + void *control_data; /* codec control (i2c/3wire) data */ + unsigned int (*read)(struct snd_soc_codec *, unsigned int); + int (*write)(struct snd_soc_codec *, unsigned int, unsigned int); + hw_write_t hw_write; + hw_read_t hw_read; + void *reg_cache; + short reg_cache_size; + short reg_cache_step; + + /* dapm */ + struct list_head dapm_widgets; + struct list_head dapm_paths; + unsigned int dapm_state; + unsigned int suspend_dapm_state; + + /* codec DAI's */ + struct snd_soc_codec_dai *dai; + unsigned int num_dai; +}; + +/* codec device */ +struct snd_soc_codec_device { + int (*probe)(struct platform_device *pdev); + int (*remove)(struct platform_device *pdev); + int (*suspend)(struct platform_device *pdev, pm_message_t state); + int (*resume)(struct platform_device *pdev); +}; + +/* SoC platform interface */ +struct snd_soc_platform { + char *name; + + int (*probe)(struct platform_device *pdev); + int (*remove)(struct platform_device *pdev); + int (*suspend)(struct platform_device *pdev, + struct snd_soc_cpu_dai *cpu_dai); + int (*resume)(struct platform_device *pdev, + struct snd_soc_cpu_dai *cpu_dai); + + /* pcm creation and destruction */ + int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *, + struct snd_pcm *); + void (*pcm_free)(struct snd_pcm *); + + /* platform stream ops */ + struct snd_pcm_ops *pcm_ops; +}; + +/* SoC machine DAI configuration, glues a codec and cpu DAI together */ +struct snd_soc_dai_link { + char *name; /* Codec name */ + char *stream_name; /* Stream name */ + + /* DAI */ + struct snd_soc_codec_dai *codec_dai; + struct snd_soc_cpu_dai *cpu_dai; + u32 flags; /* DAI config preference flags */ + + /* codec/machine specific init - e.g. add machine controls */ + int (*init)(struct snd_soc_codec *codec); + + /* audio sysclock configuration */ + unsigned int (*config_sysclk)(struct snd_soc_pcm_runtime *rtd, + struct snd_soc_clock_info *info); +}; + +/* SoC machine */ +struct snd_soc_machine { + char *name; + + int (*probe)(struct platform_device *pdev); + int (*remove)(struct platform_device *pdev); + + /* the pre and post PM functions are used to do any PM work before and + * after the codec and DAI's do any PM work. */ + int (*suspend_pre)(struct platform_device *pdev, pm_message_t state); + int (*suspend_post)(struct platform_device *pdev, pm_message_t state); + int (*resume_pre)(struct platform_device *pdev); + int (*resume_post)(struct platform_device *pdev); + + /* machine stream operations */ + struct snd_soc_ops *ops; + + /* CPU <--> Codec DAI links */ + struct snd_soc_dai_link *dai_link; + int num_links; +}; + +/* SoC Device - the audio subsystem */ +struct snd_soc_device { + struct device *dev; + struct snd_soc_machine *machine; + struct snd_soc_platform *platform; + struct snd_soc_codec *codec; + struct snd_soc_codec_device *codec_dev; + void *codec_data; +}; + +/* runtime channel data */ +struct snd_soc_pcm_runtime { + struct snd_soc_codec_dai *codec_dai; + struct snd_soc_cpu_dai *cpu_dai; + struct snd_soc_device *socdev; +}; + +/* enumerated kcontrol */ +struct soc_enum { + unsigned short reg; + unsigned short reg2; + unsigned char shift_l; + unsigned char shift_r; + unsigned int mask; + const char **texts; + void *dapm; +}; + +/* clocking configuration data */ +struct snd_soc_clock_info { + unsigned int rate; + unsigned int fs; + unsigned int bclk_master; +}; + +#endif -- cgit v1.2.3 From 40e0aa64660b4e28a9348e57bfbda6c114617969 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 6 Oct 2006 18:36:07 +0200 Subject: [ALSA] ASoC codecs: WM8731 support This patch adds ASoC support for the WM8731 codec. Supported features:- o Capture/Playback/Sidetone/Bypass. o 16 & 24 bit audio. o 8k - 96k sample rates. o DAPM. Signed-off-by: Richard Purdie Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/linux/i2c-id.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index d38778f2fbe..01e98c2a961 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -115,6 +115,7 @@ #define I2C_DRIVERID_KS0127 86 /* Samsung ks0127 video decoder */ #define I2C_DRIVERID_TLV320AIC23B 87 /* TI TLV320AIC23B audio codec */ #define I2C_DRIVERID_ISL1208 88 /* Intersil ISL1208 RTC */ +#define I2C_DRIVERID_WM8731 89 /* Wolfson WM8731 audio codec */ #define I2C_DRIVERID_I2CDEV 900 #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ -- cgit v1.2.3 From abadfc928a27e1cf27c834e8e29e6b1f64ca2d55 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 6 Oct 2006 18:36:39 +0200 Subject: [ALSA] ASoC codecs: WM8750 support This patch adds ASoC support for the WM8750 codec. Supported features:- o Capture/Playback/Sidetone/Bypass. o 16 & 24 bit audio. o 8k - 96k sample rates. o DAPM. Signed-off-by: Richard Purdie Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/linux/i2c-id.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 01e98c2a961..6e7ec4c7617 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -116,6 +116,7 @@ #define I2C_DRIVERID_TLV320AIC23B 87 /* TI TLV320AIC23B audio codec */ #define I2C_DRIVERID_ISL1208 88 /* Intersil ISL1208 RTC */ #define I2C_DRIVERID_WM8731 89 /* Wolfson WM8731 audio codec */ +#define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */ #define I2C_DRIVERID_I2CDEV 900 #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ -- cgit v1.2.3 From 9148cc502752b12051760e6c5ba5daaea3367360 Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Mon, 9 Oct 2006 23:08:00 +0100 Subject: [ALSA] snd_emu10k1: Added support for 14dB Attenuation PADS on DACs and ADCs. Signed-off-by: James Courtier-Dutton Signed-off-by: Jaroslav Kysela --- include/sound/emu10k1.h | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 396812eb668..7cfa91e7bde 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -974,7 +974,7 @@ #define EMU_HANA_OPTICAL_OUT_SPDIF 0x00 #define EMU_HANA_OPTICAL_OUT_ADAT 0x02 -#define EMU_HANA_MIDI 0x0c /* 000000x 1 bit Control MIDI */ +#define EMU_HANA_MIDI_IN 0x0c /* 000000x 1 bit Control MIDI */ #define EMU_HANA_MIDI_IN_FROM_HAMOA 0x00 /* HAMOA MIDI in to Alice 2 MIDI B */ #define EMU_HANA_MIDI_IN_FROM_DOCK 0x01 /* Audio Dock MIDI in to Alice 2 MIDI B */ @@ -1000,10 +1000,11 @@ #define EMU_HANA_DOCK_LEDS_3_MANUAL_CLIP 0x10 /* Manual Clip detection */ #define EMU_HANA_DOCK_LEDS_3_MANUAL_SIGNAL 0x20 /* Manual Signal detection */ -#define EMU_HANA_DOCK_PADS 0x10 /* 0000xxx 3 bit Audio Dock ADC 14dB pads */ -#define EMU_HANA_DOCK_PAD1 0x01 /* 14dB Attenuation on ADC 1 */ -#define EMU_HANA_DOCK_PAD2 0x02 /* 14dB Attenuation on ADC 2 */ -#define EMU_HANA_DOCK_PAD3 0x04 /* 14dB Attenuation on ADC 3 */ +#define EMU_HANA_ADC_PADS 0x10 /* 0000xxx 3 bit Audio Dock ADC 14dB pads */ +#define EMU_HANA_DOCK_ADC_PAD1 0x01 /* 14dB Attenuation on Audio Dock ADC 1 */ +#define EMU_HANA_DOCK_ADC_PAD2 0x02 /* 14dB Attenuation on Audio Dock ADC 2 */ +#define EMU_HANA_DOCK_ADC_PAD3 0x04 /* 14dB Attenuation on Audio Dock ADC 3 */ +#define EMU_HANA_0202_ADC_PAD1 0x08 /* 14dB Attenuation on 0202 ADC 1 */ #define EMU_HANA_DOCK_MISC 0x11 /* 0xxxxxx 6 bit Audio Dock misc bits */ #define EMU_HANA_DOCK_DAC1_MUTE 0x01 /* DAC 1 Mute */ @@ -1015,8 +1016,20 @@ #define EMU_HANA_DOCK_PHONES_192_DAC3 0x20 /* DAC 3 Headphones source at 192kHz */ #define EMU_HANA_DOCK_PHONES_192_DAC4 0x30 /* DAC 4 Headphones source at 192kHz */ -#define EMU_HANA_UNKNOWN12 0x12 /* 0xxxxxx 6 bit Unknown12 */ -#define EMU_HANA_UNKNOWN13 0x13 /* 0xxxxxx 6 bit Unknown13 */ +#define EMU_HANA_MIDI_OUT 0x12 /* 00xxxxx 5 bit Source for each MIDI out port */ +#define EMU_HANA_MIDI_OUT_0202 0x01 /* 0202 MIDI from Alice 2. 0 = A, 1 = B */ +#define EMU_HANA_MIDI_OUT_DOCK1 0x02 /* Audio Dock MIDI1 front, from Alice 2. 0 = A, 1 = B */ +#define EMU_HANA_MIDI_OUT_DOCK2 0x04 /* Audio Dock MIDI2 rear, from Alice 2. 0 = A, 1 = B */ +#define EMU_HANA_MIDI_OUT_SYNC2 0x08 /* Sync card. Not the actual MIDI out jack. 0 = A, 1 = B */ +#define EMU_HANA_MIDI_OUT_LOOP 0x10 /* 0 = bits (3:0) normal. 1 = MIDI loopback enabled. */ + +#define EMU_HANA_DAC_PADS 0x13 /* 00xxxxx 5 bit DAC 14dB attenuation pads */ +#define EMU_HANA_DOCK_DAC_PAD1 0x01 /* 14dB Attenuation on AudioDock DAC 1. Left and Right */ +#define EMU_HANA_DOCK_DAC_PAD2 0x02 /* 14dB Attenuation on AudioDock DAC 2. Left and Right */ +#define EMU_HANA_DOCK_DAC_PAD3 0x04 /* 14dB Attenuation on AudioDock DAC 3. Left and Right */ +#define EMU_HANA_DOCK_DAC_PAD4 0x08 /* 14dB Attenuation on AudioDock DAC 4. Left and Right */ +#define EMU_HANA_0202_DAC_PAD1 0x10 /* 14dB Attenuation on 0202 DAC 1. Left and Right */ + /* 0x14 - 0x1f Unused R/W registers */ #define EMU_HANA_IRQ_STATUS 0x20 /* 000xxxx 4 bits IRQ Status */ #if 0 /* Already defined for reg 0x09 IRQ_ENABLE */ @@ -1377,6 +1390,8 @@ struct snd_emu_chip_details { struct snd_emu1010 { unsigned int output_source[64]; unsigned int input_source[64]; + unsigned int adc_pads; /* bit mask */ + unsigned int dac_pads; /* bit mask */ }; struct snd_emu10k1 { -- cgit v1.2.3 From b0dbdaea55d55c05be972cd2a040acfa073b0509 Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Tue, 10 Oct 2006 18:08:45 +0100 Subject: [ALSA] snd-emu10k1: Add emu1010 internal clock rate control for 44100 or 48000. Signed-off-by: James Courtier-Dutton Signed-off-by: Jaroslav Kysela --- include/sound/emu10k1.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 7cfa91e7bde..8b28304f2c4 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1392,6 +1392,7 @@ struct snd_emu1010 { unsigned int input_source[64]; unsigned int adc_pads; /* bit mask */ unsigned int dac_pads; /* bit mask */ + unsigned int internal_clock; /* 44100 or 48000 */ }; struct snd_emu10k1 { -- cgit v1.2.3 From 102fa9060e114a53628a6594034b6ecf624dffc6 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 11 Oct 2006 12:05:59 +0200 Subject: [ALSA] ymfpci: add request_firmware() Load the DSP and controller microcode using request_firmware(), if possible, instead of using the built-in firmware. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- include/sound/ymfpci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h index f3514ee96bd..eef46faaee3 100644 --- a/include/sound/ymfpci.h +++ b/include/sound/ymfpci.h @@ -357,6 +357,8 @@ struct snd_ymfpci { wait_queue_head_t interrupt_sleep; atomic_t interrupt_sleep_count; struct snd_info_entry *proc_entry; + const struct firmware *dsp_microcode; + const struct firmware *controller_microcode; #ifdef CONFIG_PM u32 *saved_regs; -- cgit v1.2.3 From a71a468a50f1385855e28864e26251b02df829bb Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 19 Oct 2006 20:35:56 +0200 Subject: [ALSA] ASoC: Add support for BCLK based on (Rate * Chn * Word Size) This patch adds support for the DAI BCLK to be generated by multiplying Rate * Channels * Word Size (RCW). This now gives 3 options for BCLK clocking and synchronisation :- 1. BCLK = Rate * x 2. BCLK = MCLK / x 3. BCLK = Rate * Chn * Word Size. (New) Changes:- o Add support for RCW generation of BCLK o Update Documentation to include RCW. o Update DAI documentation for label = value DAI modes. o Add RCW support to wm8731, wm8750 and pxa2xx-i2s drivers. Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc.h | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index ecdd1fac94b..3dfe052e078 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -21,7 +21,7 @@ #include #include -#define SND_SOC_VERSION "0.11.8" +#define SND_SOC_VERSION "0.12" /* * Convenience kcontrol builders @@ -141,19 +141,24 @@ /* bit clock dividers */ #define SND_SOC_FSBD(x) (1 << (x - 1)) /* ratio mclk:bclk */ #define SND_SOC_FSBD_REAL(x) (ffs(x)) -#define SND_SOC_FSBD_ALL 0xffff /* all bit clock dividers supported */ -/* bit clock ratio to sample rate */ -#define SND_SOC_FSB(x) (1 << ((x - 16) / 16)) -#define SND_SOC_FSB_REAL(x) (((ffs(x) - 1) * 16) + 16) +/* bit clock ratio to (sample rate * channels * word size) */ +#define SND_SOC_FSBW(x) (1 << (x - 1)) +#define SND_SOC_FSBW_REAL(x) (ffs(x)) /* all bclk ratios supported */ -#define SND_SOC_FSB_ALL SND_SOC_FSBD_ALL +#define SND_SOC_FSB_ALL ~0ULL /* * DAI hardware flags */ -/* use bfs mclk divider mode, else sample rate ratio */ -#define SND_SOC_DAI_BFS_DIV 0x1 +/* use bfs mclk divider mode (BCLK = MCLK / x) */ +#define SND_SOC_DAI_BFS_DIV 0x1 +/* use bfs rate mulitplier (BCLK = RATE * x)*/ +#define SND_SOC_DAI_BFS_RATE 0x2 +/* use bfs rcw multiplier (BCLK = RATE * CHN * WORD SIZE) */ +#define SND_SOC_DAI_BFS_RCW 0x4 +/* capture and playback can use different clocks */ +#define SND_SOC_DAI_ASYNC 0x8 /* * AC97 codec ID's bitmask @@ -264,7 +269,7 @@ struct snd_soc_dai_mode { u16 pcmdir:2; /* SND_SOC_HWDIR_* */ u16 flags:8; /* hw flags */ u16 fs; /* mclk to rate divider */ - u32 bfs; /* mclk to bclk dividers */ + u64 bfs; /* mclk to bclk dividers */ unsigned long priv; /* private mode data */ }; -- cgit v1.2.3 From f1a63a38d2a885cc7e38c67b699171a7c5666d88 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 24 Oct 2006 18:25:29 +0200 Subject: [ALSA] ac97 - Suppress power-saving mode on non-supporting drivers Don't enable power-saving mode on drivers that don't support it. The supporting drivers set AC97_SCAP_POWER_SAVE to scaps at creation of ac97 instance. Currently enable on the following drivers: intel8x0, intel8x0m, atiixp, atiixp-modem, via82xx and via82xx-modem. Also, a bit clean up of power-saving stuff: - Don't create an own workq - Remove superfluous ifdefs Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ac97_codec.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 5f7c78d9e37..5d3f0d8c0e6 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -375,6 +375,7 @@ #define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */ #define AC97_SCAP_NO_SPDIF (1<<9) /* don't build SPDIF controls */ #define AC97_SCAP_EAPD_LED (1<<10) /* EAPD as mute LED */ +#define AC97_SCAP_POWER_SAVE (1<<11) /* capable for aggresive power-saving */ /* ac97->flags */ #define AC97_HAS_PC_BEEP (1<<0) /* force PC Speaker usage */ @@ -511,7 +512,6 @@ struct snd_ac97 { #ifdef CONFIG_SND_AC97_POWER_SAVE unsigned int power_up; /* power states */ - struct workqueue_struct *power_workq; struct delayed_work power_work; #endif struct device dev; -- cgit v1.2.3 From de66d53e46f39de6ea3261609fdb92900bb34a42 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 6 Nov 2006 09:18:34 +0100 Subject: [ALSA] sb16: add request_firmware() Load the CSP programs using request_firmware(), if possible, instead of using the built-in firmware blobs. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- include/sound/sb16_csp.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include') diff --git a/include/sound/sb16_csp.h b/include/sound/sb16_csp.h index caf6fe21514..736eac71d05 100644 --- a/include/sound/sb16_csp.h +++ b/include/sound/sb16_csp.h @@ -114,9 +114,21 @@ struct snd_sb_csp_info { #ifdef __KERNEL__ #include "sb.h" #include "hwdep.h" +#include struct snd_sb_csp; +/* indices for the known CSP programs */ +enum { + CSP_PROGRAM_MULAW, + CSP_PROGRAM_ALAW, + CSP_PROGRAM_ADPCM_INIT, + CSP_PROGRAM_ADPCM_PLAYBACK, + CSP_PROGRAM_ADPCM_CAPTURE, + + CSP_PROGRAM_COUNT +}; + /* * CSP operators */ @@ -159,6 +171,8 @@ struct snd_sb_csp { struct snd_kcontrol *qsound_space; struct mutex access_mutex; /* locking */ + + const struct firmware *csp_programs[CSP_PROGRAM_COUNT]; }; int snd_sb_csp_new(struct snd_sb *chip, int device, struct snd_hwdep ** rhwdep); -- cgit v1.2.3 From 59540fe85924ecb7b9760ab422cffaea0c3ce43a Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 6 Nov 2006 09:20:04 +0100 Subject: [ALSA] wavefront: simplify YSS225 register initialization Instead of using a somewhat algorithmic approach of initializing the YSS225's registers, just use a simple series of port/value pairs. This makes it easier to later replace or entirely remove the register data blob. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- include/sound/snd_wavefront.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/snd_wavefront.h b/include/sound/snd_wavefront.h index 0b9e5de94ff..9688d4be918 100644 --- a/include/sound/snd_wavefront.h +++ b/include/sound/snd_wavefront.h @@ -85,6 +85,7 @@ struct _snd_wavefront { char hw_version[2]; /* major = [0], minor = [1] */ char israw; /* needs Motorola microcode */ char has_fx; /* has FX processor (Tropez+) */ + char fx_initialized; /* FX's register pages initialized */ char prog_status[WF_MAX_PROGRAM]; /* WF_SLOT_* */ char patch_status[WF_MAX_PATCH]; /* WF_SLOT_* */ char sample_status[WF_MAX_SAMPLE]; /* WF_ST_* | WF_SLOT_* */ @@ -94,6 +95,7 @@ struct _snd_wavefront { spinlock_t irq_lock; wait_queue_head_t interrupt_sleeper; snd_wavefront_midi_t midi; /* ICS2115 MIDI interface */ + struct snd_card *card; }; struct _snd_wavefront_card { -- cgit v1.2.3 From 0b51ba07e2e2866bfea40c5551a926dbefae64da Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 20 Nov 2006 17:50:17 +0100 Subject: [ALSA] make sound/core/control.c:snd_ctl_new() static Now that everyone uses snd_ctl_new1() and noone is using snd_ctl_new() anymore, we can make it static. Signed-off-by: Adrian Bunk Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/control.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/sound/control.h b/include/sound/control.h index 1de148b0fd9..f1361d6694f 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -108,7 +108,6 @@ typedef int (*snd_kctl_ioctl_func_t) (struct snd_card * card, void snd_ctl_notify(struct snd_card * card, unsigned int mask, struct snd_ctl_elem_id * id); -struct snd_kcontrol *snd_ctl_new(struct snd_kcontrol * kcontrol, unsigned int access); struct snd_kcontrol *snd_ctl_new1(const struct snd_kcontrol_new * kcontrolnew, void * private_data); void snd_ctl_free_one(struct snd_kcontrol * kcontrol); int snd_ctl_add(struct snd_card * card, struct snd_kcontrol * kcontrol); -- cgit v1.2.3 From 59d6e149d9e5c476138911c95f288ec3feb3a34d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Nov 2006 18:37:00 +0100 Subject: [ALSA] Remove obsolete typedefs.h Removed obsolete typedefs.h. It existes only for backward compatibility, and now all codes should be free from such typedefs. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/core.h | 2 - include/sound/typedefs.h | 173 ----------------------------------------------- 2 files changed, 175 deletions(-) delete mode 100644 include/sound/typedefs.h (limited to 'include') diff --git a/include/sound/core.h b/include/sound/core.h index 83a575a29d0..506aa9f1e20 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -427,6 +427,4 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #endif #endif -#include "typedefs.h" - #endif /* __SOUND_CORE_H */ diff --git a/include/sound/typedefs.h b/include/sound/typedefs.h deleted file mode 100644 index f454b0206b9..00000000000 --- a/include/sound/typedefs.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Typedef's for backward compatibility (for out-of-kernel drivers) - * - * This file will be removed soon in future - */ - -/* core stuff */ -typedef struct snd_card snd_card_t; -typedef struct snd_device snd_device_t; -typedef struct snd_device_ops snd_device_ops_t; -typedef enum snd_card_type snd_card_type_t; -typedef struct snd_minor snd_minor_t; - -/* info */ -typedef struct snd_info_entry snd_info_entry_t; -typedef struct snd_info_buffer snd_info_buffer_t; - -/* control */ -typedef struct snd_ctl_file snd_ctl_file_t; -typedef struct snd_kcontrol snd_kcontrol_t; -typedef struct snd_kcontrol_new snd_kcontrol_new_t; -typedef struct snd_kcontrol_volatile snd_kcontrol_volatile_t; -typedef struct snd_kctl_event snd_kctl_event_t; -typedef struct snd_aes_iec958 snd_aes_iec958_t; -typedef struct snd_ctl_card_info snd_ctl_card_info_t; -typedef struct snd_ctl_elem_id snd_ctl_elem_id_t; -typedef struct snd_ctl_elem_list snd_ctl_elem_list_t; -typedef struct snd_ctl_elem_info snd_ctl_elem_info_t; -typedef struct snd_ctl_elem_value snd_ctl_elem_value_t; -typedef struct snd_ctl_event snd_ctl_event_t; -#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE) -typedef struct snd_mixer_oss snd_mixer_oss_t; -#endif - -/* timer */ -typedef struct snd_timer snd_timer_t; -typedef struct snd_timer_instance snd_timer_instance_t; -typedef struct snd_timer_id snd_timer_id_t; -typedef struct snd_timer_ginfo snd_timer_ginfo_t; -typedef struct snd_timer_gparams snd_timer_gparams_t; -typedef struct snd_timer_gstatus snd_timer_gstatus_t; -typedef struct snd_timer_select snd_timer_select_t; -typedef struct snd_timer_info snd_timer_info_t; -typedef struct snd_timer_params snd_timer_params_t; -typedef struct snd_timer_status snd_timer_status_t; -typedef struct snd_timer_read snd_timer_read_t; -typedef struct snd_timer_tread snd_timer_tread_t; - -/* PCM */ -typedef struct snd_pcm snd_pcm_t; -typedef struct snd_pcm_str snd_pcm_str_t; -typedef struct snd_pcm_substream snd_pcm_substream_t; -typedef struct snd_pcm_info snd_pcm_info_t; -typedef struct snd_pcm_hw_params snd_pcm_hw_params_t; -typedef struct snd_pcm_sw_params snd_pcm_sw_params_t; -typedef struct snd_pcm_channel_info snd_pcm_channel_info_t; -typedef struct snd_pcm_status snd_pcm_status_t; -typedef struct snd_pcm_mmap_status snd_pcm_mmap_status_t; -typedef struct snd_pcm_mmap_control snd_pcm_mmap_control_t; -typedef struct snd_mask snd_mask_t; -typedef struct snd_sg_buf snd_pcm_sgbuf_t; - -typedef struct snd_interval snd_interval_t; -typedef struct snd_xferi snd_xferi_t; -typedef struct snd_xfern snd_xfern_t; -typedef struct snd_xferv snd_xferv_t; - -typedef struct snd_pcm_file snd_pcm_file_t; -typedef struct snd_pcm_runtime snd_pcm_runtime_t; -typedef struct snd_pcm_hardware snd_pcm_hardware_t; -typedef struct snd_pcm_ops snd_pcm_ops_t; -typedef struct snd_pcm_hw_rule snd_pcm_hw_rule_t; -typedef struct snd_pcm_hw_constraints snd_pcm_hw_constraints_t; -typedef struct snd_ratnum ratnum_t; -typedef struct snd_ratden ratden_t; -typedef struct snd_pcm_hw_constraint_ratnums snd_pcm_hw_constraint_ratnums_t; -typedef struct snd_pcm_hw_constraint_ratdens snd_pcm_hw_constraint_ratdens_t; -typedef struct snd_pcm_hw_constraint_list snd_pcm_hw_constraint_list_t; -typedef struct snd_pcm_group snd_pcm_group_t; -typedef struct snd_pcm_notify snd_pcm_notify_t; - -/* rawmidi */ -typedef struct snd_rawmidi snd_rawmidi_t; -typedef struct snd_rawmidi_info snd_rawmidi_info_t; -typedef struct snd_rawmidi_params snd_rawmidi_params_t; -typedef struct snd_rawmidi_status snd_rawmidi_status_t; -typedef struct snd_rawmidi_runtime snd_rawmidi_runtime_t; -typedef struct snd_rawmidi_substream snd_rawmidi_substream_t; -typedef struct snd_rawmidi_str snd_rawmidi_str_t; -typedef struct snd_rawmidi_ops snd_rawmidi_ops_t; -typedef struct snd_rawmidi_global_ops snd_rawmidi_global_ops_t; -typedef struct snd_rawmidi_file snd_rawmidi_file_t; - -/* hwdep */ -typedef struct snd_hwdep snd_hwdep_t; -typedef struct snd_hwdep_info snd_hwdep_info_t; -typedef struct snd_hwdep_dsp_status snd_hwdep_dsp_status_t; -typedef struct snd_hwdep_dsp_image snd_hwdep_dsp_image_t; -typedef struct snd_hwdep_ops snd_hwdep_ops_t; - -/* sequencer */ -typedef struct snd_seq_port_info snd_seq_port_info_t; -typedef struct snd_seq_port_subscribe snd_seq_port_subscribe_t; -typedef struct snd_seq_event snd_seq_event_t; -typedef struct snd_seq_addr snd_seq_addr_t; -typedef struct snd_seq_ev_volume snd_seq_ev_volume_t; -typedef struct snd_seq_ev_loop snd_seq_ev_loop_t; -typedef struct snd_seq_remove_events snd_seq_remove_events_t; -typedef struct snd_seq_query_subs snd_seq_query_subs_t; -typedef struct snd_seq_system_info snd_seq_system_info_t; -typedef struct snd_seq_client_info snd_seq_client_info_t; -typedef struct snd_seq_queue_info snd_seq_queue_info_t; -typedef struct snd_seq_queue_status snd_seq_queue_status_t; -typedef struct snd_seq_queue_tempo snd_seq_queue_tempo_t; -typedef struct snd_seq_queue_owner snd_seq_queue_owner_t; -typedef struct snd_seq_queue_timer snd_seq_queue_timer_t; -typedef struct snd_seq_queue_client snd_seq_queue_client_t; -typedef struct snd_seq_client_pool snd_seq_client_pool_t; -typedef struct snd_seq_instr snd_seq_instr_t; -typedef struct snd_seq_instr_data snd_seq_instr_data_t; -typedef struct snd_seq_instr_header snd_seq_instr_header_t; - -typedef struct snd_seq_user_client user_client_t; -typedef struct snd_seq_kernel_client kernel_client_t; -typedef struct snd_seq_client client_t; -typedef struct snd_seq_queue queue_t; - -/* seq_device */ -typedef struct snd_seq_device snd_seq_device_t; -typedef struct snd_seq_dev_ops snd_seq_dev_ops_t; - -/* seq_midi */ -typedef struct snd_midi_event snd_midi_event_t; - -/* seq_midi_emul */ -typedef struct snd_midi_channel snd_midi_channel_t; -typedef struct snd_midi_channel_set snd_midi_channel_set_t; -typedef struct snd_midi_op snd_midi_op_t; - -/* seq_oss */ -typedef struct snd_seq_oss_arg snd_seq_oss_arg_t; -typedef struct snd_seq_oss_callback snd_seq_oss_callback_t; -typedef struct snd_seq_oss_reg snd_seq_oss_reg_t; - -/* virmidi */ -typedef struct snd_virmidi_dev snd_virmidi_dev_t; -typedef struct snd_virmidi snd_virmidi_t; - -/* seq_instr */ -typedef struct snd_seq_kcluster snd_seq_kcluster_t; -typedef struct snd_seq_kinstr_ops snd_seq_kinstr_ops_t; -typedef struct snd_seq_kinstr snd_seq_kinstr_t; -typedef struct snd_seq_kinstr_list snd_seq_kinstr_list_t; - -/* ac97 */ -typedef struct snd_ac97_bus ac97_bus_t; -typedef struct snd_ac97_bus_ops ac97_bus_ops_t; -typedef struct snd_ac97_template ac97_template_t; -typedef struct snd_ac97 ac97_t; - -/* opl3/4 */ -typedef struct snd_opl3 opl3_t; -typedef struct snd_opl4 opl4_t; - -/* mpu401 */ -typedef struct snd_mpu401 mpu401_t; - -/* i2c */ -typedef struct snd_i2c_device snd_i2c_device_t; -typedef struct snd_i2c_bus snd_i2c_bus_t; - -typedef struct snd_ak4531 ak4531_t; - -- cgit v1.2.3 From d9ea472c743ccd7344055cb118bc210befbd8007 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 24 Nov 2006 15:34:06 +0100 Subject: [ALSA] Add PCI quirk list helper function Added a helper function snd_pci_quirk_lookup() to look up PCI SSID quirk list. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/core.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include') diff --git a/include/sound/core.h b/include/sound/core.h index 506aa9f1e20..3c493ad620d 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -427,4 +427,29 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #endif #endif +/* PCI quirk list helper */ +struct snd_pci_quirk { + unsigned short subvendor; /* PCI subvendor ID */ + unsigned short subdevice; /* PCI subdevice ID */ + int value; /* value */ +#ifdef CONFIG_SND_DEBUG_DETECT + const char *name; /* name of the device (optional) */ +#endif +}; + +#define _SND_PCI_QUIRK_ID(vend,dev) \ + .subvendor = (vend), .subdevice = (dev) +#define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)} +#ifdef CONFIG_SND_DEBUG_DETECT +#define SND_PCI_QUIRK(vend,dev,xname,val) \ + {_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)} +#else +#define SND_PCI_QUIRK(vend,dev,xname,val) \ + {_SND_PCI_QUIRK_ID(vend, dev), .value = (val)} +#endif + +const struct snd_pci_quirk * +snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list); + + #endif /* __SOUND_CORE_H */ -- cgit v1.2.3 From 9ed1261e3e617d99b0eb74041d0337ff664e4f5b Mon Sep 17 00:00:00 2001 From: Teru KAMOGASHIRA Date: Mon, 4 Dec 2006 18:03:53 +0100 Subject: [ALSA] Current driver does not utilize 44.1kHz high quality sampling rate converter. Following patch will make the driver to use the 44.1kHz SRC automatically if the pcm source is 44.1kHz signed 16bit stereo. The SRC is available in YMF754 only. Signed-off-by: Teru KAMOGASHIRA Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- include/sound/ymfpci.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h index eef46faaee3..203d2b45b78 100644 --- a/include/sound/ymfpci.h +++ b/include/sound/ymfpci.h @@ -270,6 +270,7 @@ struct snd_ymfpci_pcm { struct snd_pcm_substream *substream; struct snd_ymfpci_voice *voices[2]; /* playback only */ unsigned int running: 1, + use_441_slot: 1, output_front: 1, output_rear: 1, swap_rear: 1; @@ -324,6 +325,7 @@ struct snd_ymfpci { u32 active_bank; struct snd_ymfpci_voice voices[64]; + int src441_used; struct snd_ac97_bus *ac97_bus; struct snd_ac97 *ac97; @@ -346,7 +348,7 @@ struct snd_ymfpci { int mode_dup4ch; int rear_opened; int spdif_opened; - struct { + struct snd_ymfpci_pcm_mixer { u16 left; u16 right; struct snd_kcontrol *ctl; -- cgit v1.2.3 From 184c1e2c4c4221c2b8d1e16c33314595373fa73f Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Wed, 6 Dec 2006 15:58:02 +0000 Subject: [ALSA] emu10k1: Add Audio capture support for Audigy 2 ZS Notebook. Implement functionallity in order to fixe ALSA bug#2058. Signed-off-by: James Courtier-Dutton Signed-off-by: Jaroslav Kysela --- include/sound/emu10k1.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 8b28304f2c4..32ce4bd31b4 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1427,6 +1427,8 @@ struct snd_emu10k1 { spinlock_t memblk_lock; unsigned int spdif_bits[3]; /* s/pdif out setup */ + unsigned int i2c_capture_source; + u8 i2c_capture_volume[4][2]; struct snd_emu10k1_fx8010 fx8010; /* FX8010 info */ int gpr_base; @@ -1532,6 +1534,7 @@ void snd_emu10k1_ptr_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned i unsigned int snd_emu10k1_ptr20_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn); void snd_emu10k1_ptr20_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data); int snd_emu10k1_spi_write(struct snd_emu10k1 * emu, unsigned int data); +int snd_emu10k1_i2c_write(struct snd_emu10k1 *emu, u32 reg, u32 value); int snd_emu1010_fpga_write(struct snd_emu10k1 * emu, int reg, int value); int snd_emu1010_fpga_read(struct snd_emu10k1 * emu, int reg, int *value); int snd_emu1010_fpga_link_dst_src_write(struct snd_emu10k1 * emu, int dst, int src); -- cgit v1.2.3 From e0e6ce0380e0c4de35371372bc5b6c2b02458597 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 7 Dec 2006 08:22:50 +0100 Subject: [ALSA] add struct snd_pcm_substream forward declaration fixes: include/sound/pcm.h:62: warning: 'struct snd_pcm_substream' declared inside parameter list Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Jaroslav Kysela --- include/sound/pcm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/pcm.h b/include/sound/pcm.h index ec006ed8cd5..ee6bc2d0680 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -56,6 +56,8 @@ struct snd_pcm_hardware { size_t fifo_size; /* fifo size in bytes */ }; +struct snd_pcm_substream; + struct snd_pcm_ops { int (*open)(struct snd_pcm_substream *substream); int (*close)(struct snd_pcm_substream *substream); -- cgit v1.2.3 From cbb7d8f9b7b0a9f51c9869d0da63ea75a2c95caf Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Wed, 13 Dec 2006 11:21:55 +0000 Subject: [ALSA] emu10k1: Update registers defines for the Audigy 2/emu10k2.5 Signed-off-by: James Courtier-Dutton Signed-off-by: Jaroslav Kysela --- include/sound/emu10k1.h | 63 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 32ce4bd31b4..adca71b20da 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -460,6 +460,7 @@ #define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */ #define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */ +#define A_HR 0x0b /* High Resolution. 24bit playback from host to DSP. */ #define MAPA 0x0c /* Cache map A */ #define MAPB 0x0d /* Cache map B */ @@ -467,6 +468,8 @@ #define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */ #define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */ +/* 0x0e, 0x0f: Not used */ + #define ENVVOL 0x10 /* Volume envelope register */ #define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */ /* 0x8000-n == 666*n usec delay */ @@ -555,7 +558,7 @@ /* NOTE: All channels contain internal variables; do */ /* not write to these locations. */ -/* 1f something */ +/* 0x1f: not used */ #define CD0 0x20 /* Cache data 0 register */ #define CD1 0x21 /* Cache data 1 register */ @@ -625,6 +628,8 @@ #define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */ #define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */ +#define A_TBLSZ ` 0x43 /* Effects Tank Internal Table Size. Only low byte or register used */ + #define TCBS 0x44 /* Tank cache buffer size register */ #define TCBS_MASK 0x00000007 /* Tank cache buffer size field */ #define TCBS_BUFFSIZE_16K 0x00000000 @@ -645,7 +650,7 @@ #define FXBA 0x47 /* FX Buffer Address */ #define FXBA_MASK 0xfffff000 /* 20 bit base address */ -/* 0x48 something - word access, defaults to 3f */ +#define A_HWM 0x48 /* High PCI Water Mark - word access, defaults to 3f */ #define MICBS 0x49 /* Microphone buffer size register */ @@ -689,6 +694,18 @@ #define ADCBS_BUFSIZE_57344 0x0000001e #define ADCBS_BUFSIZE_65536 0x0000001f +/* Current Send B, A Amounts */ +#define A_CSBA 0x4c + +/* Current Send D, C Amounts */ +#define A_CSDC 0x4d + +/* Current Send F, E Amounts */ +#define A_CSFE 0x4e + +/* Current Send H, G Amounts */ +#define A_CSHG 0x4f + #define CDCS 0x50 /* CD-ROM digital channel status register */ @@ -696,6 +713,9 @@ #define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ +/* S/PDIF Input C Channel Status */ +#define A_SPSC 0x52 + #define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ #define A_DBG 0x53 @@ -736,6 +756,8 @@ #define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */ #define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */ +/* 0x57: Not used */ + /* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */ #define CLIEL 0x58 /* Channel loop interrupt enable low register */ @@ -761,6 +783,9 @@ #define AC97SLOT_CNTR 0x10 /* Center enable */ #define AC97SLOT_LFE 0x20 /* LFE enable */ +/* PCB Revision */ +#define A_PCB 0x5f + // NOTE: 0x60,61,62: 64-bit #define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */ @@ -808,9 +833,18 @@ #define HLIPH 0x69 /* Channel half loop interrupt pending high register */ -// 0x6a,6b,6c used for some recording -// 0x6d unused -// 0x6e,6f - tanktable base / offset +/* S/PDIF Host Record Index (bypasses SRC) */ +#define A_SPRI 0x6a +/* S/PDIF Host Record Address */ +#define A_SPRA 0x6b +/* S/PDIF Host Record Control */ +#define A_SPRC 0x6c +/* Delayed Interrupt Counter & Enable */ +#define A_DICE 0x6d +/* Tank Table Base */ +#define A_TTB 0x6e +/* Tank Delay Offset */ +#define A_TDOF 0x6f /* This is the MPU port on the card (via the game port) */ #define A_MUDATA1 0x70 @@ -828,6 +862,7 @@ #define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */ #define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */ +/* Extended Hardware Control */ #define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */ #define A_SAMPLE_RATE 0x76 /* Various sample rate settings. */ #define A_SAMPLE_RATE_NOT_USED 0x0ffc111e /* Bits that are not used and cannot be set. */ @@ -850,8 +885,20 @@ #define A_PCM_96000 0x00004000 #define A_PCM_44100 0x00008000 -/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */ -/* 0x7a, 0x7b - lookup tables */ +/* I2S0 Sample Rate Tracker Status */ +#define A_SRT3 0x77 + +/* I2S1 Sample Rate Tracker Status */ +#define A_SRT4 0x78 + +/* I2S2 Sample Rate Tracker Status */ +#define A_SRT5 0x79 +/* - default to 0x01080000 on my audigy 2 ZS --rlrevell */ + +/* Tank Table DMA Address */ +#define A_TTDA 0x7a +/* Tank Table DMA Data */ +#define A_TTDD 0x7b #define A_FXRT2 0x7c #define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */ @@ -873,7 +920,7 @@ #define A_FXRT_CHANNELC 0x003f0000 #define A_FXRT_CHANNELD 0x3f000000 - +/* 0x7f: Not used */ /* Each FX general purpose register is 32 bits in length, all bits are used */ #define FXGPREGBASE 0x100 /* FX general purpose registers base */ #define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */ -- cgit v1.2.3 From 4484bb2e93a9ab636d149edc6515c75ea224e2b0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 15 Dec 2006 09:30:07 +0100 Subject: [ALSA] Fix the soc code after dhowells workqueue changes. From: Andrew Morton I converted the workqueues to per-device while I was there. It seems strange to create a new kernel thread (on each CPU!) and to then only have a single global work to ever be queued upon it. Plus without this, I'd have to use the _NAR stuff, gawd help me. Does that workqueue really need to be per-cpu? Does that workqueue really need to exist? Why not use keventd? Cc: Takashi Iwai Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Jaroslav Kysela --- include/sound/soc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index 3dfe052e078..c985a111bc3 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -454,6 +455,7 @@ struct snd_soc_device { struct snd_soc_platform *platform; struct snd_soc_codec *codec; struct snd_soc_codec_device *codec_dev; + struct delayed_work delayed_work; void *codec_data; }; -- cgit v1.2.3 From 4014c38bd94156c10986a11d890bdae99437dc9a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 19 Dec 2006 17:13:16 +0100 Subject: [ALSA] ak4114 - Use global workqueue Use global workqueue for simplicity instead of own workqueue. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ak4114.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/sound/ak4114.h b/include/sound/ak4114.h index 2ee061625fd..85f49d46475 100644 --- a/include/sound/ak4114.h +++ b/include/sound/ak4114.h @@ -181,7 +181,6 @@ struct ak4114 { unsigned long ccrc_errors; unsigned char rcs0; unsigned char rcs1; - struct workqueue_struct *workqueue; struct delayed_work work; void *change_callback_private; void (*change_callback)(struct ak4114 *ak4114, unsigned char c0, unsigned char c1); -- cgit v1.2.3 From 1321b160fa1cf63fa841d954fe31220366b6647a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 21 Dec 2006 11:02:06 +0100 Subject: [ALSA] soc - Fix delayed_work related changes on 2.6.20 kernel Fix the changes realted to delayed_work in soc/codecs/wm8750.c. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index c985a111bc3..ea836d819ce 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -374,6 +374,7 @@ struct snd_soc_codec { struct list_head dapm_paths; unsigned int dapm_state; unsigned int suspend_dapm_state; + struct delayed_work delayed_work; /* codec DAI's */ struct snd_soc_codec_dai *dai; -- cgit v1.2.3 From 67e9f4b68c9d1820132c559c0f9b296dafdf631e Mon Sep 17 00:00:00 2001 From: Randy Cushman Date: Fri, 22 Dec 2006 12:44:25 +0100 Subject: [ALSA] ac97 - fix various issues with AD1986/AD1986A support Previously, ac97_codec.c was coded to support AD1986 and AD1986A CODECs using code written for the AD1985 CODEC. This allowed the LINE_OUT and HEADPHONE jacks to function properly, however register differences between the CODECs prevented line and microphone inputs from functioning. Specifically, this patch fixes issues with the following mixer controls: 'V_REFOUT', 'Spread Front to Surround and Center/LFE', 'Exchange Front/Surround', 'Surround Jack Mode', and 'Channel Mode'. This patch removes the undocumented AD1888 control 'High Pass Filter Enable' and adds the new control 'Exchange Mic/Line In'. Signed-off-by: Randy Cushman Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ac97_codec.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 5d3f0d8c0e6..246ac23534b 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -503,6 +503,7 @@ struct snd_ac97 { unsigned short id[3]; // codec IDs (lower 16-bit word) unsigned short pcmreg[3]; // PCM registers unsigned short codec_cfg[3]; // CODEC_CFG bits + unsigned char swap_mic_linein; // AD1986/AD1986A only } ad18xx; unsigned int dev_flags; /* device specific */ } spec; -- cgit v1.2.3 From f7ba7fc6173a9fb6d8a5bc02bf335cc358f21a09 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Jan 2007 18:34:47 +0100 Subject: [ALSA] emu10k1 - Fix ABI for older ld10k1 Fix ABI for older ld10k1. When no EMU10K1_PVERSION ioctl is issued, the driver accepts ioctls with the old struct size without TLV information. Also, changed the struct field to make the conversion easier from the old to the new structs. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/emu10k1.h | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index adca71b20da..975df288ce4 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1449,6 +1449,7 @@ struct snd_emu10k1 { unsigned int tos_link: 1, /* tos link detected */ rear_ac97: 1, /* rear channels are on AC'97 */ enable_ir: 1; + unsigned int support_tlv :1; /* Contains profile of card capabilities */ const struct snd_emu_chip_details *card_capabilities; unsigned int audigy; /* is Audigy? */ @@ -1901,11 +1902,20 @@ struct snd_emu10k1_fx8010_control_gpr { unsigned int value[32]; /* initial values */ unsigned int min; /* minimum range */ unsigned int max; /* maximum range */ - union { - snd_kcontrol_tlv_rw_t *c; - unsigned int *p; - } tlv; unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */ + unsigned int *tlv; +}; + +/* old ABI without TLV support */ +struct snd_emu10k1_fx8010_control_old_gpr { + struct snd_ctl_elem_id id; + unsigned int vcount; + unsigned int count; + unsigned short gpr[32]; + unsigned int value[32]; + unsigned int min; + unsigned int max; + unsigned int translation; }; struct snd_emu10k1_fx8010_code { @@ -1956,6 +1966,8 @@ struct snd_emu10k1_fx8010_pcm_rec { unsigned int res2; /* reserved */ }; +#define SNDRV_EMU10K1_VERSION SNDRV_PROTOCOL_VERSION(1, 0, 1) + #define SNDRV_EMU10K1_IOCTL_INFO _IOR ('H', 0x10, struct snd_emu10k1_fx8010_info) #define SNDRV_EMU10K1_IOCTL_CODE_POKE _IOW ('H', 0x11, struct snd_emu10k1_fx8010_code) #define SNDRV_EMU10K1_IOCTL_CODE_PEEK _IOWR('H', 0x12, struct snd_emu10k1_fx8010_code) @@ -1964,6 +1976,7 @@ struct snd_emu10k1_fx8010_pcm_rec { #define SNDRV_EMU10K1_IOCTL_TRAM_PEEK _IOWR('H', 0x22, struct snd_emu10k1_fx8010_tram) #define SNDRV_EMU10K1_IOCTL_PCM_POKE _IOW ('H', 0x30, struct snd_emu10k1_fx8010_pcm_rec) #define SNDRV_EMU10K1_IOCTL_PCM_PEEK _IOWR('H', 0x31, struct snd_emu10k1_fx8010_pcm_rec) +#define SNDRV_EMU10K1_IOCTL_PVERSION _IOR ('H', 0x40, int) #define SNDRV_EMU10K1_IOCTL_STOP _IO ('H', 0x80) #define SNDRV_EMU10K1_IOCTL_CONTINUE _IO ('H', 0x81) #define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82) -- cgit v1.2.3 From 517400cbc75d0604bc34c1866dff7e55ca1be2b4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 29 Jan 2007 15:27:56 +0100 Subject: [ALSA] Add some more 'const', but needs changes in i2c/other/ak4* Make data passed to ak4xxx_create 'const'. Signed-of-by: Philipp Matthias Hahn Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ak4114.h | 2 +- include/sound/ak4117.h | 2 +- include/sound/ak4xxx-adda.h | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/sound/ak4114.h b/include/sound/ak4114.h index 85f49d46475..c149d3b2558 100644 --- a/include/sound/ak4114.h +++ b/include/sound/ak4114.h @@ -188,7 +188,7 @@ struct ak4114 { int snd_ak4114_create(struct snd_card *card, ak4114_read_t *read, ak4114_write_t *write, - unsigned char pgm[7], unsigned char txcsb[5], + const unsigned char pgm[7], const unsigned char txcsb[5], void *private_data, struct ak4114 **r_ak4114); void snd_ak4114_reg_write(struct ak4114 *ak4114, unsigned char reg, unsigned char mask, unsigned char val); void snd_ak4114_reinit(struct ak4114 *ak4114); diff --git a/include/sound/ak4117.h b/include/sound/ak4117.h index 2b96c32f06f..d650d52e3d2 100644 --- a/include/sound/ak4117.h +++ b/include/sound/ak4117.h @@ -178,7 +178,7 @@ struct ak4117 { }; int snd_ak4117_create(struct snd_card *card, ak4117_read_t *read, ak4117_write_t *write, - unsigned char pgm[5], void *private_data, struct ak4117 **r_ak4117); + const unsigned char pgm[5], void *private_data, struct ak4117 **r_ak4117); void snd_ak4117_reg_write(struct ak4117 *ak4117, unsigned char reg, unsigned char mask, unsigned char val); void snd_ak4117_reinit(struct ak4117 *ak4117); int snd_ak4117_build(struct ak4117 *ak4117, struct snd_pcm_substream *capture_substream); diff --git a/include/sound/ak4xxx-adda.h b/include/sound/ak4xxx-adda.h index d01d5352801..aa49dda4f41 100644 --- a/include/sound/ak4xxx-adda.h +++ b/include/sound/ak4xxx-adda.h @@ -71,8 +71,8 @@ struct snd_akm4xxx { } type; /* (array) information of combined codecs */ - struct snd_akm4xxx_dac_channel *dac_info; - struct snd_akm4xxx_adc_channel *adc_info; + const struct snd_akm4xxx_dac_channel *dac_info; + const struct snd_akm4xxx_adc_channel *adc_info; struct snd_ak4xxx_ops ops; }; -- cgit v1.2.3 From 0cb29ea0d449d7c0ecc9649a08ab63476389701d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 29 Jan 2007 15:33:49 +0100 Subject: [ALSA] Add even more 'const' to everything related to TLV Mark TLV data as 'const' Signed-of-by: Philipp Matthias Hahn Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/ad1848.h | 2 +- include/sound/control.h | 4 ++-- include/sound/emu10k1.h | 2 +- include/sound/vx_core.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/sound/ad1848.h b/include/sound/ad1848.h index c8de6f83338..b2c3f00a9b3 100644 --- a/include/sound/ad1848.h +++ b/include/sound/ad1848.h @@ -185,7 +185,7 @@ struct ad1848_mix_elem { int index; int type; unsigned long private_value; - unsigned int *tlv; + const unsigned int *tlv; }; #define AD1848_SINGLE(xname, xindex, reg, shift, mask, invert) \ diff --git a/include/sound/control.h b/include/sound/control.h index f1361d6694f..72e759f619b 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -49,7 +49,7 @@ struct snd_kcontrol_new { snd_kcontrol_put_t *put; union { snd_kcontrol_tlv_rw_t *c; - unsigned int *p; + const unsigned int *p; } tlv; unsigned long private_value; }; @@ -69,7 +69,7 @@ struct snd_kcontrol { snd_kcontrol_put_t *put; union { snd_kcontrol_tlv_rw_t *c; - unsigned int *p; + const unsigned int *p; } tlv; unsigned long private_value; void *private_data; diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 975df288ce4..eb7ce96ddf3 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1903,7 +1903,7 @@ struct snd_emu10k1_fx8010_control_gpr { unsigned int min; /* minimum range */ unsigned int max; /* maximum range */ unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */ - unsigned int *tlv; + const unsigned int *tlv; }; /* old ABI without TLV support */ diff --git a/include/sound/vx_core.h b/include/sound/vx_core.h index 21739465209..4830651cc4c 100644 --- a/include/sound/vx_core.h +++ b/include/sound/vx_core.h @@ -128,7 +128,7 @@ struct snd_vx_hardware { unsigned int num_ins; unsigned int num_outs; unsigned int output_level_max; - unsigned int *output_level_db_scale; + const unsigned int *output_level_db_scale; }; /* hwdep id string */ -- cgit v1.2.3 From 1c433fbda4896a6455d97b66a4f2646cbdd52a8c Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Fri, 2 Feb 2007 17:13:05 +0100 Subject: [ALSA] soc - 0.13 ASoC headers This patch updates the API's to include the new DAI configuration and clocking architecture. Changes:- o Removed DAI automatic matching and capabilities structure (struct snd_soc_dai_mode) and macros. o Added DAI operations for codec and CPU interfaces. o Removed config_sysclk() function and struct snd_soc_clock_info. No longer needed as clocking is now configured manually in the machine drivers. Also removed other clocking data from structures. o Updated version to 0.13 o Added shift to SOC_SINGLE_EXT kcontrol macro. Signed-off-by: Graeme Gregory Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc.h | 193 ++++++++++++++++++++++------------------------------ 1 file changed, 83 insertions(+), 110 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index ea836d819ce..b1dc364b8f7 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -22,7 +22,7 @@ #include #include -#define SND_SOC_VERSION "0.12" +#define SND_SOC_VERSION "0.13.0" /* * Convenience kcontrol builders @@ -60,12 +60,12 @@ .info = snd_soc_info_enum_double, \ .get = snd_soc_get_enum_double, .put = snd_soc_put_enum_double, \ .private_value = (unsigned long)&xenum } -#define SOC_SINGLE_EXT(xname, xreg, xmask, xinvert,\ +#define SOC_SINGLE_EXT(xname, xreg, xshift, xmask, xinvert,\ xhandler_get, xhandler_put) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ - .info = snd_soc_info_volsw_ext, \ + .info = snd_soc_info_volsw, \ .get = xhandler_get, .put = xhandler_put, \ - .private_value = SOC_SINGLE_VALUE_EXT(xreg, xmask, xinvert) } + .private_value = SOC_SINGLE_VALUE(xreg, xshift, xmask, xinvert) } #define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_bool_ext, \ @@ -87,20 +87,29 @@ /* * DAI hardware audio formats */ -#define SND_SOC_DAIFMT_I2S (1 << 0) /* I2S mode */ -#define SND_SOC_DAIFMT_RIGHT_J (1 << 1) /* Right justified mode */ -#define SND_SOC_DAIFMT_LEFT_J (1 << 2) /* Left Justified mode */ -#define SND_SOC_DAIFMT_DSP_A (1 << 3) /* L data msb after FRM or LRC */ -#define SND_SOC_DAIFMT_DSP_B (1 << 4) /* L data msb during FRM or LRC */ -#define SND_SOC_DAIFMT_AC97 (1 << 5) /* AC97 */ +#define SND_SOC_DAIFMT_I2S 0 /* I2S mode */ +#define SND_SOC_DAIFMT_RIGHT_J 1 /* Right justified mode */ +#define SND_SOC_DAIFMT_LEFT_J 2 /* Left Justified mode */ +#define SND_SOC_DAIFMT_DSP_A 3 /* L data msb after FRM or LRC */ +#define SND_SOC_DAIFMT_DSP_B 4 /* L data msb during FRM or LRC */ +#define SND_SOC_DAIFMT_AC97 5 /* AC97 */ + +#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J +#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J + +/* + * DAI Gating + */ +#define SND_SOC_DAIFMT_CONT (0 << 4) /* continuous clock */ +#define SND_SOC_DAIFMT_GATED (1 << 4) /* clock is gated when not Tx/Rx */ /* * DAI hardware signal inversions */ -#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */ -#define SND_SOC_DAIFMT_NB_IF (1 << 9) /* normal bclk + inv frm */ -#define SND_SOC_DAIFMT_IB_NF (1 << 10) /* invert bclk + nor frm */ -#define SND_SOC_DAIFMT_IB_IF (1 << 11) /* invert bclk + frm */ +#define SND_SOC_DAIFMT_NB_NF (0 << 8) /* normal bit clock + frame */ +#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal bclk + inv frm */ +#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert bclk + nor frm */ +#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert bclk + frm */ /* * DAI hardware clock masters @@ -108,58 +117,22 @@ * i.e. if the codec is clk and frm master then the interface is * clk and frame slave. */ -#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & frm master */ -#define SND_SOC_DAIFMT_CBS_CFM (1 << 13) /* codec clk slave & frm master */ -#define SND_SOC_DAIFMT_CBM_CFS (1 << 14) /* codec clk master & frame slave */ -#define SND_SOC_DAIFMT_CBS_CFS (1 << 15) /* codec clk & frm slave */ +#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & frm master */ +#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & frm master */ +#define SND_SOC_DAIFMT_CBM_CFS (2 << 12) /* codec clk master & frame slave */ +#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & frm slave */ -#define SND_SOC_DAIFMT_FORMAT_MASK 0x00ff +#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f +#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0 #define SND_SOC_DAIFMT_INV_MASK 0x0f00 -#define SND_SOC_DAIFMT_CLOCK_MASK 0xf000 - -/* - * DAI hardware audio direction - */ -#define SND_SOC_DAIDIR_PLAYBACK 0x1 -#define SND_SOC_DAIDIR_CAPTURE 0x2 - -/* - * DAI hardware Time Division Multiplexing (TDM) Slots - * Left and Right data word positions - * This is measured in words (sample size) and not bits. - */ -#define SND_SOC_DAITDM_LRDW(l,r) ((l << 8) | r) - -/* - * DAI hardware clock ratios - * bit clock can either be a generated by dividing mclk or - * by multiplying sample rate, hence there are 2 definitions below - * depending on codec type. - */ -/* ratio of sample rate to mclk/sysclk */ -#define SND_SOC_FS_ALL 0xffff /* all mclk supported */ - -/* bit clock dividers */ -#define SND_SOC_FSBD(x) (1 << (x - 1)) /* ratio mclk:bclk */ -#define SND_SOC_FSBD_REAL(x) (ffs(x)) +#define SND_SOC_DAIFMT_MASTER_MASK 0xf000 -/* bit clock ratio to (sample rate * channels * word size) */ -#define SND_SOC_FSBW(x) (1 << (x - 1)) -#define SND_SOC_FSBW_REAL(x) (ffs(x)) -/* all bclk ratios supported */ -#define SND_SOC_FSB_ALL ~0ULL /* - * DAI hardware flags + * Master Clock Directions */ -/* use bfs mclk divider mode (BCLK = MCLK / x) */ -#define SND_SOC_DAI_BFS_DIV 0x1 -/* use bfs rate mulitplier (BCLK = RATE * x)*/ -#define SND_SOC_DAI_BFS_RATE 0x2 -/* use bfs rcw multiplier (BCLK = RATE * CHN * WORD SIZE) */ -#define SND_SOC_DAI_BFS_RCW 0x4 -/* capture and playback can use different clocks */ -#define SND_SOC_DAI_ASYNC 0x8 +#define SND_SOC_CLOCK_IN 0 +#define SND_SOC_CLOCK_OUT 1 /* * AC97 codec ID's bitmask @@ -195,7 +168,6 @@ int snd_soc_register_card(struct snd_soc_device *socdev); /* set runtime hw params */ int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream, const struct snd_pcm_hardware *hw); -int snd_soc_get_rate(int rate); /* codec IO */ #define snd_soc_read(codec, reg) codec->read(codec, reg) @@ -244,6 +216,8 @@ int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol, /* SoC PCM stream information */ struct snd_soc_pcm_stream { char *stream_name; + u64 formats; /* SNDRV_PCM_FMTBIT_* */ + unsigned int rates; /* SNDRV_PCM_RATE_* */ unsigned int rate_min; /* min rate */ unsigned int rate_max; /* max rate */ unsigned int channels_min; /* min channels */ @@ -261,23 +235,43 @@ struct snd_soc_ops { int (*trigger)(struct snd_pcm_substream *, int); }; -/* SoC DAI hardware mode */ -struct snd_soc_dai_mode { - u16 fmt; /* SND_SOC_DAIFMT_* */ - u16 tdm; /* SND_SOC_HWTDM_* */ - u64 pcmfmt; /* SNDRV_PCM_FMTBIT_* */ - u16 pcmrate; /* SND_SOC_HWRATE_* */ - u16 pcmdir:2; /* SND_SOC_HWDIR_* */ - u16 flags:8; /* hw flags */ - u16 fs; /* mclk to rate divider */ - u64 bfs; /* mclk to bclk dividers */ - unsigned long priv; /* private mode data */ +/* ASoC codec DAI ops */ +struct snd_soc_codec_ops { + /* codec DAI clocking configuration */ + int (*set_sysclk)(struct snd_soc_codec_dai *codec_dai, + int clk_id, unsigned int freq, int dir); + int (*set_pll)(struct snd_soc_codec_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out); + int (*set_clkdiv)(struct snd_soc_codec_dai *codec_dai, + int div_id, int div); + + /* CPU DAI format configuration */ + int (*set_fmt)(struct snd_soc_codec_dai *codec_dai, + unsigned int fmt); + int (*set_tdm_slot)(struct snd_soc_codec_dai *codec_dai, + unsigned int mask, int slots); + int (*set_tristate)(struct snd_soc_codec_dai *, int tristate); + + /* digital mute */ + int (*digital_mute)(struct snd_soc_codec_dai *, int mute); }; -/* DAI capabilities */ -struct snd_soc_dai_cap { - int num_modes; /* number of DAI modes */ - struct snd_soc_dai_mode *mode; /* array of supported DAI modes */ +/* ASoC cpu DAI ops */ +struct snd_soc_cpu_ops { + /* CPU DAI clocking configuration */ + int (*set_sysclk)(struct snd_soc_cpu_dai *cpu_dai, + int clk_id, unsigned int freq, int dir); + int (*set_clkdiv)(struct snd_soc_cpu_dai *cpu_dai, + int div_id, int div); + int (*set_pll)(struct snd_soc_cpu_dai *cpu_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out); + + /* CPU DAI format configuration */ + int (*set_fmt)(struct snd_soc_cpu_dai *cpu_dai, + unsigned int fmt); + int (*set_tdm_slot)(struct snd_soc_cpu_dai *cpu_dai, + unsigned int mask, int slots); + int (*set_tristate)(struct snd_soc_cpu_dai *, int tristate); }; /* SoC Codec DAI */ @@ -288,22 +282,16 @@ struct snd_soc_codec_dai { /* DAI capabilities */ struct snd_soc_pcm_stream playback; struct snd_soc_pcm_stream capture; - struct snd_soc_dai_cap caps; /* DAI runtime info */ - struct snd_soc_dai_mode dai_runtime; - struct snd_soc_ops ops; - unsigned int (*config_sysclk)(struct snd_soc_codec_dai*, - struct snd_soc_clock_info *info, unsigned int clk); - int (*digital_mute)(struct snd_soc_codec *, - struct snd_soc_codec_dai*, int); - unsigned int mclk; /* the audio master clock */ - unsigned int pll_in; /* the PLL input clock */ - unsigned int pll_out; /* the PLL output clock */ - unsigned int clk_div; /* internal clock divider << 1 (for fractions) */ + struct snd_soc_codec *codec; unsigned int active; unsigned char pop_wait:1; + /* ops */ + struct snd_soc_ops ops; + struct snd_soc_codec_ops dai_ops; + /* DAI private data */ void *private_data; }; @@ -323,20 +311,18 @@ struct snd_soc_cpu_dai { struct snd_soc_cpu_dai *cpu_dai); int (*resume)(struct platform_device *pdev, struct snd_soc_cpu_dai *cpu_dai); - unsigned int (*config_sysclk)(struct snd_soc_cpu_dai *cpu_dai, - struct snd_soc_clock_info *info, unsigned int clk); + + /* ops */ + struct snd_soc_ops ops; + struct snd_soc_cpu_ops dai_ops; /* DAI capabilities */ struct snd_soc_pcm_stream capture; struct snd_soc_pcm_stream playback; - struct snd_soc_dai_cap caps; /* DAI runtime info */ - struct snd_soc_dai_mode dai_runtime; - struct snd_soc_ops ops; struct snd_pcm_runtime *runtime; unsigned char active:1; - unsigned int mclk; void *dma_data; /* DAI private data */ @@ -417,14 +403,12 @@ struct snd_soc_dai_link { /* DAI */ struct snd_soc_codec_dai *codec_dai; struct snd_soc_cpu_dai *cpu_dai; - u32 flags; /* DAI config preference flags */ + + /* machine stream operations */ + struct snd_soc_ops *ops; /* codec/machine specific init - e.g. add machine controls */ int (*init)(struct snd_soc_codec *codec); - - /* audio sysclock configuration */ - unsigned int (*config_sysclk)(struct snd_soc_pcm_runtime *rtd, - struct snd_soc_clock_info *info); }; /* SoC machine */ @@ -441,9 +425,6 @@ struct snd_soc_machine { int (*resume_pre)(struct platform_device *pdev); int (*resume_post)(struct platform_device *pdev); - /* machine stream operations */ - struct snd_soc_ops *ops; - /* CPU <--> Codec DAI links */ struct snd_soc_dai_link *dai_link; int num_links; @@ -462,8 +443,7 @@ struct snd_soc_device { /* runtime channel data */ struct snd_soc_pcm_runtime { - struct snd_soc_codec_dai *codec_dai; - struct snd_soc_cpu_dai *cpu_dai; + struct snd_soc_dai_link *dai; struct snd_soc_device *socdev; }; @@ -478,11 +458,4 @@ struct soc_enum { void *dapm; }; -/* clocking configuration data */ -struct snd_soc_clock_info { - unsigned int rate; - unsigned int fs; - unsigned int bclk_master; -}; - #endif -- cgit v1.2.3 From 48ec15dca87805cf771855612d647bfe1a9f617f Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 9 Feb 2007 14:50:18 +0100 Subject: [ALSA] version 1.0.14rc2 Signed-off-by: Jaroslav Kysela --- include/sound/version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/version.h b/include/sound/version.h index 20f7babad51..c39b3802cf1 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by alsa/ksync script. */ -#define CONFIG_SND_VERSION "1.0.14rc1" -#define CONFIG_SND_DATE " (Tue Jan 09 09:56:17 2007 UTC)" +#define CONFIG_SND_VERSION "1.0.14rc2" +#define CONFIG_SND_DATE " (Fri Feb 09 13:50:10 2007 UTC)" -- cgit v1.2.3 From 31321bc946527f2e4c50b6b08459d1c0d81fa978 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sun, 7 Jan 2007 18:43:41 -0500 Subject: Remove a couple final references to obsolete verify_area(). Remove a couple final references to the obsolete verify_area() call, which was long ago replaced by access_ok(). Signed-off-by: Robert P. J. Day Acked-by: Jesper Juhl Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/checksum.h | 2 +- include/asm-avr32/uaccess.h | 6 ------ 2 files changed, 1 insertion(+), 7 deletions(-) (limited to 'include') diff --git a/include/asm-avr32/checksum.h b/include/asm-avr32/checksum.h index af9d53f0f5d..4ddbfd2486a 100644 --- a/include/asm-avr32/checksum.h +++ b/include/asm-avr32/checksum.h @@ -38,7 +38,7 @@ __wsum csum_partial_copy_generic(const void *src, void *dst, int len, * passed in an incorrect kernel address to one of these functions. * * If you use these functions directly please don't forget the - * verify_area(). + * access_ok(). */ static inline __wsum csum_partial_copy_nocheck(const void *src, void *dst, diff --git a/include/asm-avr32/uaccess.h b/include/asm-avr32/uaccess.h index 821deb5a9d2..74a679e9098 100644 --- a/include/asm-avr32/uaccess.h +++ b/include/asm-avr32/uaccess.h @@ -68,12 +68,6 @@ static inline void set_fs(mm_segment_t s) #define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0)) -static inline int -verify_area(int type, const void __user *addr, unsigned long size) -{ - return access_ok(type, addr, size) ? 0 : -EFAULT; -} - /* Generic arbitrary sized copy. Return the number of bytes NOT copied */ extern __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); -- cgit v1.2.3 From 6eb484fe92e2f67f888dc87e97bfd938c0f7404e Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 1 Feb 2007 16:26:03 +0100 Subject: [AVR32] Implement dma_mapping_error() dma_map_single() never fails, so dma_mapping_error() simply returns 0. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/dma-mapping.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h index 5c01e27f0b4..115813e48fe 100644 --- a/include/asm-avr32/dma-mapping.h +++ b/include/asm-avr32/dma-mapping.h @@ -32,6 +32,14 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask) return 0; } +/* + * dma_map_single can't fail as it is implemented now. + */ +static inline int dma_mapping_error(dma_addr_t addr) +{ + return 0; +} + /** * dma_alloc_coherent - allocate consistent memory for DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices -- cgit v1.2.3 From 6a4e5227a33f60f918b30cf2001fb0bb259d9396 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 5 Feb 2007 16:57:13 +0100 Subject: [AVR32] GPIO API implementation Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by David Brownell. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/arch-at32ap/gpio.h | 27 +++++++++++++++++++++++++++ include/asm-avr32/arch-at32ap/irq.h | 14 ++++++++++++++ include/asm-avr32/arch-at32ap/portmux.h | 7 ++++--- include/asm-avr32/gpio.h | 6 ++++++ include/asm-avr32/irq.h | 8 ++++++-- 5 files changed, 57 insertions(+), 5 deletions(-) create mode 100644 include/asm-avr32/arch-at32ap/gpio.h create mode 100644 include/asm-avr32/arch-at32ap/irq.h create mode 100644 include/asm-avr32/gpio.h (limited to 'include') diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/include/asm-avr32/arch-at32ap/gpio.h new file mode 100644 index 00000000000..fcb756bdaa8 --- /dev/null +++ b/include/asm-avr32/arch-at32ap/gpio.h @@ -0,0 +1,27 @@ +#ifndef __ASM_AVR32_ARCH_GPIO_H +#define __ASM_AVR32_ARCH_GPIO_H + +#include +#include + + +/* Arch-neutral GPIO API */ +int __must_check gpio_request(unsigned int gpio, const char *label); +void gpio_free(unsigned int gpio); + +int gpio_direction_input(unsigned int gpio); +int gpio_direction_output(unsigned int gpio); +int gpio_get_value(unsigned int gpio); +void gpio_set_value(unsigned int gpio, int value); + +static inline int gpio_to_irq(unsigned int gpio) +{ + return gpio + GPIO_IRQ_BASE; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return irq - GPIO_IRQ_BASE; +} + +#endif /* __ASM_AVR32_ARCH_GPIO_H */ diff --git a/include/asm-avr32/arch-at32ap/irq.h b/include/asm-avr32/arch-at32ap/irq.h new file mode 100644 index 00000000000..f8f7f4571e4 --- /dev/null +++ b/include/asm-avr32/arch-at32ap/irq.h @@ -0,0 +1,14 @@ +#ifndef __ASM_AVR32_ARCH_IRQ_H +#define __ASM_AVR32_ARCH_IRQ_H + +#define EIM_IRQ_BASE NR_INTERNAL_IRQS +#define NR_EIM_IRQS 32 + +#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) + +#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) +#define NR_GPIO_IRQS (4 * 32) + +#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) + +#endif /* __ASM_AVR32_ARCH_IRQ_H */ diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h index 83c69057132..2ba611e0e13 100644 --- a/include/asm-avr32/arch-at32ap/portmux.h +++ b/include/asm-avr32/arch-at32ap/portmux.h @@ -15,9 +15,10 @@ * * The following flags determine the initial state of the pin. */ -#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */ -#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */ -#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */ +#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */ +#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */ +#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */ +#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ void at32_select_periph(unsigned int pin, unsigned int periph, unsigned long flags); diff --git a/include/asm-avr32/gpio.h b/include/asm-avr32/gpio.h new file mode 100644 index 00000000000..19e8ccc77db --- /dev/null +++ b/include/asm-avr32/gpio.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_GPIO_H +#define __ASM_AVR32_GPIO_H + +#include + +#endif /* __ASM_AVR32_GPIO_H */ diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h index f7e725707dd..83e6549d778 100644 --- a/include/asm-avr32/irq.h +++ b/include/asm-avr32/irq.h @@ -2,8 +2,12 @@ #define __ASM_AVR32_IRQ_H #define NR_INTERNAL_IRQS 64 -#define NR_EXTERNAL_IRQS 64 -#define NR_IRQS (NR_INTERNAL_IRQS + NR_EXTERNAL_IRQS) + +#include + +#ifndef NR_IRQS +#define NR_IRQS (NR_INTERNAL_IRQS) +#endif #define irq_canonicalize(i) (i) -- cgit v1.2.3 From e7f70b8cc69b1bcc56ed8d70f8e3671ec3956374 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 30 Jan 2007 11:01:23 +0100 Subject: [AVR32] Introduce at32_reserve_pin() at32_reserve_pin() can be used for reserving portmux pins without altering their configuration. Useful for e.g. SDRAM pins where we really don't want to change the bootloader-provided configuration. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/arch-at32ap/portmux.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h index 2ba611e0e13..9930871decd 100644 --- a/include/asm-avr32/arch-at32ap/portmux.h +++ b/include/asm-avr32/arch-at32ap/portmux.h @@ -23,5 +23,6 @@ void at32_select_periph(unsigned int pin, unsigned int periph, unsigned long flags); void at32_select_gpio(unsigned int pin, unsigned long flags); +void at32_reserve_pin(unsigned int pin); #endif /* __ASM_ARCH_PORTMUX_H__ */ -- cgit v1.2.3 From 7f9f4678637f9ee1a999cc0870c4668f32e1a7eb Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 30 Jan 2007 11:16:16 +0100 Subject: [AVR32] Add PIOE device and reserve SDRAM pins The PIOE device was left out before because it muxes SDRAM pins (and is therefore a bit dangerous to mess with) and because no existing drivers had any use for it. It is needed for CompactFlash, however, and now that we have a way to protect the SDRAM pins, it can be safely added. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/arch-at32ap/at32ap7000.h | 2 ++ include/asm-avr32/arch-at32ap/irq.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h index ba85e04553d..3914d7b94ff 100644 --- a/include/asm-avr32/arch-at32ap/at32ap7000.h +++ b/include/asm-avr32/arch-at32ap/at32ap7000.h @@ -24,10 +24,12 @@ #define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) #define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) #define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) +#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) #define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) #define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) #define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) #define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) +#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) #endif /* __ASM_ARCH_AT32AP7000_H__ */ diff --git a/include/asm-avr32/arch-at32ap/irq.h b/include/asm-avr32/arch-at32ap/irq.h index f8f7f4571e4..5adffab9a57 100644 --- a/include/asm-avr32/arch-at32ap/irq.h +++ b/include/asm-avr32/arch-at32ap/irq.h @@ -7,7 +7,7 @@ #define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) #define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) -#define NR_GPIO_IRQS (4 * 32) +#define NR_GPIO_IRQS (5 * 32) #define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) -- cgit v1.2.3 From a3b0277d1c1d754eeb9a8f994339edbd914cacda Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 9 Feb 2007 12:01:02 +0100 Subject: [AVR32] ssize_t should be long, not int Since size_t is defined as unsigned long, ssize_t ought to be long and not int. It could have been the other way around, but gcc defines size_t as unsigned long, so this is correct. This fixes a couple of printk format warnings. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/posix_types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-avr32/posix_types.h b/include/asm-avr32/posix_types.h index 2831b039b34..9e255b99963 100644 --- a/include/asm-avr32/posix_types.h +++ b/include/asm-avr32/posix_types.h @@ -23,7 +23,7 @@ typedef unsigned short __kernel_ipc_pid_t; typedef unsigned int __kernel_uid_t; typedef unsigned int __kernel_gid_t; typedef unsigned long __kernel_size_t; -typedef int __kernel_ssize_t; +typedef long __kernel_ssize_t; typedef int __kernel_ptrdiff_t; typedef long __kernel_time_t; typedef long __kernel_suseconds_t; -- cgit v1.2.3 From c2902c8ae06762d941fab64198467f78cab6f8cd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 9 Feb 2007 16:25:48 +0100 Subject: [PATCH] Fix breakage with CONFIG_SYSFS_DEPRECATED The fix for sysfs breakage with CONFIG_SYSFS_DEPRECATED was flown away by the conflicted merge of the ALSA git tree. The patch below fixes it again. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/core.h b/include/sound/core.h index 3c493ad620d..4b9e609975a 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -242,7 +242,7 @@ static inline int snd_register_device(int type, struct snd_card *card, int dev, { return snd_register_device_for_dev(type, card, dev, f_ops, private_data, name, - card ? card->dev : NULL); + snd_card_get_device_link(card)); } int snd_unregister_device(int type, struct snd_card *card, int dev); -- cgit v1.2.3 From 62045305c20a194127ae87ccf963cfe6ffde7c4e Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 9 Feb 2007 05:28:19 +0100 Subject: [PATCH] mm: remove find_trylock_page Remove find_trylock_page as per the removal schedule. Signed-off-by: Nick Piggin [ Let's see if anybody screams ] Signed-off-by: Linus Torvalds --- include/linux/pagemap.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index c3e255bf859..7a8dcb82a69 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -76,8 +76,6 @@ extern struct page * find_get_page(struct address_space *mapping, unsigned long index); extern struct page * find_lock_page(struct address_space *mapping, unsigned long index); -extern __deprecated_for_modules struct page * find_trylock_page( - struct address_space *mapping, unsigned long index); extern struct page * find_or_create_page(struct address_space *mapping, unsigned long index, gfp_t gfp_mask); unsigned find_get_pages(struct address_space *mapping, pgoff_t start, -- cgit v1.2.3 From b454cc6636d254fbf6049b73e9560aee76fb04a3 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 5 Feb 2007 16:28:25 -0800 Subject: [TC] MIPS: TURBOchannel update to the driver model This is a set of changes to convert support for the TURBOchannel bus to the driver model. It implements the usual set of calls similar to what other bus drivers have: tc_register_driver(), tc_unregister_driver(), etc. All the platform-specific bits have been removed and headers from asm-mips/dec/ have been merged into linux/tc.h, which should be included by drivers. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Ralf Baechle --- include/asm-mips/dec/tc.h | 41 ------------ include/asm-mips/dec/tcinfo.h | 47 -------------- include/asm-mips/dec/tcmodule.h | 39 ----------- include/linux/tc.h | 141 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 141 insertions(+), 127 deletions(-) delete mode 100644 include/asm-mips/dec/tc.h delete mode 100644 include/asm-mips/dec/tcinfo.h delete mode 100644 include/asm-mips/dec/tcmodule.h create mode 100644 include/linux/tc.h (limited to 'include') diff --git a/include/asm-mips/dec/tc.h b/include/asm-mips/dec/tc.h deleted file mode 100644 index 9cb51f24d42..00000000000 --- a/include/asm-mips/dec/tc.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Interface to the TURBOchannel related routines - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1998 Harald Koerfgen - */ -#ifndef __ASM_DEC_TC_H -#define __ASM_DEC_TC_H - -/* - * Search for a TURBOchannel Option Module - * with a certain name. Returns slot number - * of the first card not in use or -ENODEV - * if none found. - */ -extern int search_tc_card(const char *); -/* - * Marks the card in slot as used - */ -extern void claim_tc_card(int); -/* - * Marks the card in slot as free - */ -extern void release_tc_card(int); -/* - * Return base address of card in slot - */ -extern unsigned long get_tc_base_addr(int); -/* - * Return interrupt number of slot - */ -extern unsigned long get_tc_irq_nr(int); -/* - * Return TURBOchannel clock frequency in Hz - */ -extern unsigned long get_tc_speed(void); - -#endif /* __ASM_DEC_TC_H */ diff --git a/include/asm-mips/dec/tcinfo.h b/include/asm-mips/dec/tcinfo.h deleted file mode 100644 index cc23509ee77..00000000000 --- a/include/asm-mips/dec/tcinfo.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Various TURBOchannel related stuff - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Information obtained through the get_tcinfo prom call - * created from: - * - * TURBOchannel Firmware Specification - * - * EK-TCAAD-FS-004 - * from Digital Equipment Corporation - * - * Copyright (c) 1998 Harald Koerfgen - */ - -typedef struct { - int revision; - int clk_period; - int slot_size; - int io_timeout; - int dma_range; - int max_dma_burst; - int parity; - int reserved[4]; -} tcinfo; - -#define MAX_SLOT 7 - -typedef struct { - unsigned long base_addr; - unsigned char name[9]; - unsigned char vendor[9]; - unsigned char firmware[9]; - int interrupt; - int flags; -} slot_info; - -/* - * Values for flags - */ -#define FREE 1<<0 -#define IN_USE 1<<1 - - diff --git a/include/asm-mips/dec/tcmodule.h b/include/asm-mips/dec/tcmodule.h deleted file mode 100644 index 6268e8915d8..00000000000 --- a/include/asm-mips/dec/tcmodule.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Offsets for the ROM header locations for - * TURBOchannel cards - * - * created from: - * - * TURBOchannel Firmware Specification - * - * EK-TCAAD-FS-004 - * from Digital Equipment Corporation - * - * Jan.1998 Harald Koerfgen - */ -#ifndef __ASM_DEC_TCMODULE_H -#define __ASM_DEC_TCMODULE_H - -#define OLDCARD 0x3c0000 -#define NEWCARD 0x000000 - -#define TC_ROM_WIDTH 0x3e0 -#define TC_ROM_STRIDE 0x3e4 -#define TC_ROM_SIZE 0x3e8 -#define TC_SLOT_SIZE 0x3ec -#define TC_PATTERN0 0x3f0 -#define TC_PATTERN1 0x3f4 -#define TC_PATTERN2 0x3f8 -#define TC_PATTERN3 0x3fc -#define TC_FIRM_VER 0x400 -#define TC_VENDOR 0x420 -#define TC_MODULE 0x440 -#define TC_FIRM_TYPE 0x460 -#define TC_FLAGS 0x470 -#define TC_ROM_OBJECTS 0x480 - -#endif /* __ASM_DEC_TCMODULE_H */ diff --git a/include/linux/tc.h b/include/linux/tc.h new file mode 100644 index 00000000000..f92511e57cd --- /dev/null +++ b/include/linux/tc.h @@ -0,0 +1,141 @@ +/* + * Interface to the TURBOchannel related routines. + * + * Copyright (c) 1998 Harald Koerfgen + * Copyright (c) 2005 James Simmons + * Copyright (c) 2006 Maciej W. Rozycki + * + * Based on: + * + * "TURBOchannel Firmware Specification", EK-TCAAD-FS-004 + * + * from Digital Equipment Corporation. + * + * This file is subject to the terms and conditions of the GNU + * General Public License. See the file "COPYING" in the main + * directory of this archive for more details. + */ +#ifndef _LINUX_TC_H +#define _LINUX_TC_H + +#include +#include +#include +#include + +/* + * Offsets for the ROM header locations for TURBOchannel cards. + */ +#define TC_OLDCARD 0x3c0000 +#define TC_NEWCARD 0x000000 + +#define TC_ROM_WIDTH 0x3e0 +#define TC_ROM_STRIDE 0x3e4 +#define TC_ROM_SIZE 0x3e8 +#define TC_SLOT_SIZE 0x3ec +#define TC_PATTERN0 0x3f0 +#define TC_PATTERN1 0x3f4 +#define TC_PATTERN2 0x3f8 +#define TC_PATTERN3 0x3fc +#define TC_FIRM_VER 0x400 +#define TC_VENDOR 0x420 +#define TC_MODULE 0x440 +#define TC_FIRM_TYPE 0x460 +#define TC_FLAGS 0x470 +#define TC_ROM_OBJECTS 0x480 + +/* + * Information obtained through the get_tcinfo() PROM call. + */ +struct tcinfo { + s32 revision; /* Hardware revision level. */ + s32 clk_period; /* Clock period in nanoseconds. */ + s32 slot_size; /* Slot size in megabytes. */ + s32 io_timeout; /* I/O timeout in cycles. */ + s32 dma_range; /* DMA address range in megabytes. */ + s32 max_dma_burst; /* Maximum DMA burst length. */ + s32 parity; /* System module supports TC parity. */ + s32 reserved[4]; +}; + +/* + * TURBOchannel bus. + */ +struct tc_bus { + struct list_head devices; /* List of devices on this bus. */ + struct resource resource[2]; /* Address space routed to this bus. */ + + struct device dev; + char name[13]; + resource_size_t slot_base; + resource_size_t ext_slot_base; + resource_size_t ext_slot_size; + int num_tcslots; + struct tcinfo info; +}; + +/* + * TURBOchannel device. + */ +struct tc_dev { + struct list_head node; /* Node in list of all TC devices. */ + struct tc_bus *bus; /* Bus this device is on. */ + struct tc_driver *driver; /* Which driver has allocated this + device. */ + struct device dev; /* Generic device interface. */ + struct resource resource; /* Address space of this device. */ + char vendor[9]; + char name[9]; + char firmware[9]; + int interrupt; + int slot; +}; + +#define to_tc_dev(n) container_of(n, struct tc_dev, dev) + +struct tc_device_id { + char vendor[9]; + char name[9]; +}; + +/* + * TURBOchannel driver. + */ +struct tc_driver { + struct list_head node; + const struct tc_device_id *id_table; + struct device_driver driver; +}; + +#define to_tc_driver(drv) container_of(drv, struct tc_driver, driver) + +/* + * Return TURBOchannel clock frequency in Hz. + */ +static inline unsigned long tc_get_speed(struct tc_bus *tbus) +{ + return 100000 * (10000 / (unsigned long)tbus->info.clk_period); +} + +#ifdef CONFIG_TC + +extern struct bus_type tc_bus_type; + +extern int tc_register_driver(struct tc_driver *tdrv); +extern void tc_unregister_driver(struct tc_driver *tdrv); + +#else /* !CONFIG_TC */ + +static inline int tc_register_driver(struct tc_driver *tdrv) { return 0; } +static inline void tc_unregister_driver(struct tc_driver *tdrv) { } + +#endif /* CONFIG_TC */ + +/* + * These have to be provided by the architecture. + */ +extern int tc_preadb(u8 *valp, void __iomem *addr); +extern int tc_bus_get_info(struct tc_bus *tbus); +extern void tc_device_get_irq(struct tc_dev *tdev); + +#endif /* _LINUX_TC_H */ -- cgit v1.2.3 From 33cf45b90eb73e1f3b784b50691d74f7ea381b21 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 5 Feb 2007 16:28:26 -0800 Subject: [TC] TURBOchannel support for the DECstation This is the platform-specific part of TURBOchannel bus support for the DECstation. It implements determining whether the bus is actually there, getting bus parameters, IRQ assignments for devices and protected accesses to possibly unoccupied slots that may trigger bus error exceptions. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Ralf Baechle --- include/asm-mips/dec/system.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-mips/dec/system.h b/include/asm-mips/dec/system.h index 78af51fbc79..b2afaccd683 100644 --- a/include/asm-mips/dec/system.h +++ b/include/asm-mips/dec/system.h @@ -3,7 +3,7 @@ * * Generic DECstation/DECsystem bits. * - * Copyright (C) 2005 Maciej W. Rozycki + * Copyright (C) 2005, 2006 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -14,5 +14,6 @@ #define __ASM_DEC_SYSTEM_H extern unsigned long dec_kn_slot_base, dec_kn_slot_size; +extern int dec_tc_bus; #endif /* __ASM_DEC_SYSTEM_H */ -- cgit v1.2.3 From f85da084151c9454891124c999006857a354622a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 5 Feb 2007 16:28:26 -0800 Subject: [EISA] EISA registration with !CONFIG_EISA This is a change for the EISA bus support to permit drivers to call un/registration functions even if EISA support has not been enabled. This is similar to what PCI (and now TC) does and reduces the need for #ifdef clutter. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Ralf Baechle --- include/linux/eisa.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/eisa.h b/include/linux/eisa.h index 1ff7c139252..fe806b6f030 100644 --- a/include/linux/eisa.h +++ b/include/linux/eisa.h @@ -61,10 +61,20 @@ struct eisa_driver { #define to_eisa_driver(drv) container_of(drv,struct eisa_driver, driver) +/* These external functions are only available when EISA support is enabled. */ +#ifdef CONFIG_EISA + extern struct bus_type eisa_bus_type; int eisa_driver_register (struct eisa_driver *edrv); void eisa_driver_unregister (struct eisa_driver *edrv); +#else /* !CONFIG_EISA */ + +static inline int eisa_driver_register (struct eisa_driver *edrv) { return 0; } +static inline void eisa_driver_unregister (struct eisa_driver *edrv) { } + +#endif /* !CONFIG_EISA */ + /* Mimics pci.h... */ static inline void *eisa_get_drvdata (struct eisa_device *edev) { -- cgit v1.2.3 From 7726942fb15edd46e4fe8ab37f9a99795191e585 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 9 Feb 2007 17:08:57 +0000 Subject: [APM] Add shared version of APM emulation Currently ARM and MIPS both have nearly identical copies of the APM emulation code in their arch code. Add yet another copy of it to drivers char and make it selectable through SYS_SUPPORTS_APM_EMULATION. Signed-off-by: Ralf Baechle --- include/linux/apm-emulation.h | 62 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 include/linux/apm-emulation.h (limited to 'include') diff --git a/include/linux/apm-emulation.h b/include/linux/apm-emulation.h new file mode 100644 index 00000000000..e6d800358dd --- /dev/null +++ b/include/linux/apm-emulation.h @@ -0,0 +1,62 @@ +/* -*- linux-c -*- + * + * (C) 2003 zecke@handhelds.org + * + * GPL version 2 + * + * based on arch/arm/kernel/apm.c + * factor out the information needed by architectures to provide + * apm status + */ +#ifndef __LINUX_APM_EMULATION_H +#define __LINUX_APM_EMULATION_H + +#include + +/* + * This structure gets filled in by the machine specific 'get_power_status' + * implementation. Any fields which are not set default to a safe value. + */ +struct apm_power_info { + unsigned char ac_line_status; +#define APM_AC_OFFLINE 0 +#define APM_AC_ONLINE 1 +#define APM_AC_BACKUP 2 +#define APM_AC_UNKNOWN 0xff + + unsigned char battery_status; +#define APM_BATTERY_STATUS_HIGH 0 +#define APM_BATTERY_STATUS_LOW 1 +#define APM_BATTERY_STATUS_CRITICAL 2 +#define APM_BATTERY_STATUS_CHARGING 3 +#define APM_BATTERY_STATUS_NOT_PRESENT 4 +#define APM_BATTERY_STATUS_UNKNOWN 0xff + + unsigned char battery_flag; +#define APM_BATTERY_FLAG_HIGH (1 << 0) +#define APM_BATTERY_FLAG_LOW (1 << 1) +#define APM_BATTERY_FLAG_CRITICAL (1 << 2) +#define APM_BATTERY_FLAG_CHARGING (1 << 3) +#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7) +#define APM_BATTERY_FLAG_UNKNOWN 0xff + + int battery_life; + int time; + int units; +#define APM_UNITS_MINS 0 +#define APM_UNITS_SECS 1 +#define APM_UNITS_UNKNOWN -1 + +}; + +/* + * This allows machines to provide their own "apm get power status" function. + */ +extern void (*apm_get_power_status)(struct apm_power_info *); + +/* + * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND) + */ +void apm_queue_event(apm_event_t event); + +#endif /* __LINUX_APM_EMULATION_H */ -- cgit v1.2.3 From 75e7153abd220f1c4a731a9613fb705485b56aa8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 9 Feb 2007 17:08:58 +0000 Subject: [APM] ARM: Convert to use shared APM emulation. Signed-off-by: Ralf Baechle --- include/asm-arm/apm.h | 64 --------------------------------------------------- 1 file changed, 64 deletions(-) delete mode 100644 include/asm-arm/apm.h (limited to 'include') diff --git a/include/asm-arm/apm.h b/include/asm-arm/apm.h deleted file mode 100644 index d09113b37e4..00000000000 --- a/include/asm-arm/apm.h +++ /dev/null @@ -1,64 +0,0 @@ -/* -*- linux-c -*- - * - * (C) 2003 zecke@handhelds.org - * - * GPL version 2 - * - * based on arch/arm/kernel/apm.c - * factor out the information needed by architectures to provide - * apm status - * - * - */ -#ifndef ARM_ASM_SA1100_APM_H -#define ARM_ASM_SA1100_APM_H - -#include - -/* - * This structure gets filled in by the machine specific 'get_power_status' - * implementation. Any fields which are not set default to a safe value. - */ -struct apm_power_info { - unsigned char ac_line_status; -#define APM_AC_OFFLINE 0 -#define APM_AC_ONLINE 1 -#define APM_AC_BACKUP 2 -#define APM_AC_UNKNOWN 0xff - - unsigned char battery_status; -#define APM_BATTERY_STATUS_HIGH 0 -#define APM_BATTERY_STATUS_LOW 1 -#define APM_BATTERY_STATUS_CRITICAL 2 -#define APM_BATTERY_STATUS_CHARGING 3 -#define APM_BATTERY_STATUS_NOT_PRESENT 4 -#define APM_BATTERY_STATUS_UNKNOWN 0xff - - unsigned char battery_flag; -#define APM_BATTERY_FLAG_HIGH (1 << 0) -#define APM_BATTERY_FLAG_LOW (1 << 1) -#define APM_BATTERY_FLAG_CRITICAL (1 << 2) -#define APM_BATTERY_FLAG_CHARGING (1 << 3) -#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7) -#define APM_BATTERY_FLAG_UNKNOWN 0xff - - int battery_life; - int time; - int units; -#define APM_UNITS_MINS 0 -#define APM_UNITS_SECS 1 -#define APM_UNITS_UNKNOWN -1 - -}; - -/* - * This allows machines to provide their own "apm get power status" function. - */ -extern void (*apm_get_power_status)(struct apm_power_info *); - -/* - * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND) - */ -void apm_queue_event(apm_event_t event); - -#endif -- cgit v1.2.3 From 2116245ee121af820225834e9695005ab07d1e84 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 9 Feb 2007 17:08:58 +0000 Subject: [APM] MIPS: Convert to use shared APM emulation. Also convert to use generic kernel/power/Kconfig to make the use of the shared APM emulation possible. Signed-off-by: Ralf Baechle --- include/asm-mips/apm.h | 64 -------------------------------------------------- 1 file changed, 64 deletions(-) delete mode 100644 include/asm-mips/apm.h (limited to 'include') diff --git a/include/asm-mips/apm.h b/include/asm-mips/apm.h deleted file mode 100644 index 4b99ffc1152..00000000000 --- a/include/asm-mips/apm.h +++ /dev/null @@ -1,64 +0,0 @@ -/* -*- linux-c -*- - * - * (C) 2003 zecke@handhelds.org - * - * GPL version 2 - * - * based on arch/arm/kernel/apm.c - * factor out the information needed by architectures to provide - * apm status - * - * - */ -#ifndef MIPS_ASM_SA1100_APM_H -#define MIPS_ASM_SA1100_APM_H - -#include - -/* - * This structure gets filled in by the machine specific 'get_power_status' - * implementation. Any fields which are not set default to a safe value. - */ -struct apm_power_info { - unsigned char ac_line_status; -#define APM_AC_OFFLINE 0 -#define APM_AC_ONLINE 1 -#define APM_AC_BACKUP 2 -#define APM_AC_UNKNOWN 0xff - - unsigned char battery_status; -#define APM_BATTERY_STATUS_HIGH 0 -#define APM_BATTERY_STATUS_LOW 1 -#define APM_BATTERY_STATUS_CRITICAL 2 -#define APM_BATTERY_STATUS_CHARGING 3 -#define APM_BATTERY_STATUS_NOT_PRESENT 4 -#define APM_BATTERY_STATUS_UNKNOWN 0xff - - unsigned char battery_flag; -#define APM_BATTERY_FLAG_HIGH (1 << 0) -#define APM_BATTERY_FLAG_LOW (1 << 1) -#define APM_BATTERY_FLAG_CRITICAL (1 << 2) -#define APM_BATTERY_FLAG_CHARGING (1 << 3) -#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7) -#define APM_BATTERY_FLAG_UNKNOWN 0xff - - int battery_life; - int time; - int units; -#define APM_UNITS_MINS 0 -#define APM_UNITS_SECS 1 -#define APM_UNITS_UNKNOWN -1 - -}; - -/* - * This allows machines to provide their own "apm get power status" function. - */ -extern void (*apm_get_power_status)(struct apm_power_info *); - -/* - * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND) - */ -void apm_queue_event(apm_event_t event); - -#endif -- cgit v1.2.3 From 0a9b0db19262dbb09f3a34195e68cafd5dc3fa10 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 24 Jan 2007 21:56:20 +0900 Subject: [APM] SH: Convert to use shared APM emulation. Signed-off-by: Paul Mundt Signed-off-by: Ralf Baechle --- include/asm-sh/apm.h | 46 ---------------------------------------------- 1 file changed, 46 deletions(-) delete mode 100644 include/asm-sh/apm.h (limited to 'include') diff --git a/include/asm-sh/apm.h b/include/asm-sh/apm.h deleted file mode 100644 index 8b091e93651..00000000000 --- a/include/asm-sh/apm.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright 2006 (c) Andriy Skulysh - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#ifndef __ASM_SH_APM_H -#define __ASM_SH_APM_H - -#define APM_AC_OFFLINE 0 -#define APM_AC_ONLINE 1 -#define APM_AC_BACKUP 2 -#define APM_AC_UNKNOWN 0xff - -#define APM_BATTERY_STATUS_HIGH 0 -#define APM_BATTERY_STATUS_LOW 1 -#define APM_BATTERY_STATUS_CRITICAL 2 -#define APM_BATTERY_STATUS_CHARGING 3 -#define APM_BATTERY_STATUS_NOT_PRESENT 4 -#define APM_BATTERY_STATUS_UNKNOWN 0xff - -#define APM_BATTERY_LIFE_UNKNOWN 0xFFFF -#define APM_BATTERY_LIFE_MINUTES 0x8000 -#define APM_BATTERY_LIFE_VALUE_MASK 0x7FFF - -#define APM_BATTERY_FLAG_HIGH (1 << 0) -#define APM_BATTERY_FLAG_LOW (1 << 1) -#define APM_BATTERY_FLAG_CRITICAL (1 << 2) -#define APM_BATTERY_FLAG_CHARGING (1 << 3) -#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7) -#define APM_BATTERY_FLAG_UNKNOWN 0xff - -#define APM_UNITS_MINS 0 -#define APM_UNITS_SECS 1 -#define APM_UNITS_UNKNOWN -1 - - -extern int (*apm_get_info)(char *buf, char **start, off_t fpos, int length); -extern int apm_suspended; - -void apm_queue_event(apm_event_t event); - -#endif -- cgit v1.2.3 From f2e97df669d32f74152336f46e4e0e328b993c57 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:38:55 +0000 Subject: [PATCH] in non-NUMA case mark GFP_THISNODE gfp_t ... operations with it are OK as is, but flags & ~0 will have no idea that this ~0 is meant to be ~gfp_t. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 00c314aedab..063799ea6be 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -70,7 +70,7 @@ struct vm_area_struct; #ifdef CONFIG_NUMA #define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY) #else -#define GFP_THISNODE 0 +#define GFP_THISNODE ((__force gfp_t)0) #endif -- cgit v1.2.3 From 4ec031166f6a466a443f462e567f7551096b1741 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:38:30 +0000 Subject: [PATCH] kill eth_io_copy_and_sum() On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len). The function name is highly misguiding (it _never_ does any checksums), the last argument is just a noise and simply expanding the call to memcpy_fromio() gives shorter and more readable source. For a lot of reasons it has almost no remaining users, so it's better to just outright kill it. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/asm-alpha/io.h | 9 --------- include/asm-arm/arch-ixp4xx/io.h | 3 --- include/asm-arm/io.h | 5 ----- include/asm-cris/io.h | 5 ----- include/asm-i386/io.h | 6 ------ include/asm-mips/io.h | 6 ------ include/asm-parisc/io.h | 9 --------- include/asm-ppc/io.h | 2 -- include/asm-x86_64/io.h | 6 ------ 9 files changed, 51 deletions(-) (limited to 'include') diff --git a/include/asm-alpha/io.h b/include/asm-alpha/io.h index 5d15af24573..24bdcc8b63a 100644 --- a/include/asm-alpha/io.h +++ b/include/asm-alpha/io.h @@ -524,15 +524,6 @@ extern void outsb (unsigned long port, const void *src, unsigned long count); extern void outsw (unsigned long port, const void *src, unsigned long count); extern void outsl (unsigned long port, const void *src, unsigned long count); -/* - * XXX - We don't have csum_partial_copy_fromio() yet, so we cheat here and - * just copy it. The net code will then do the checksum later. Presently - * only used by some shared memory 8390 Ethernet cards anyway. - */ - -#define eth_io_copy_and_sum(skb,src,len,unused) \ - memcpy_fromio((skb)->data,src,len) - /* * The Alpha Jensen hardware for some rather strange reason puts * the RTC clock at 0x170 instead of 0x70. Probably due to some diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h index 0d517267fb6..b7b5414d932 100644 --- a/include/asm-arm/arch-ixp4xx/io.h +++ b/include/asm-arm/arch-ixp4xx/io.h @@ -238,9 +238,6 @@ __ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) #define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l)) #define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l)) -#define eth_io_copy_and_sum(s,c,l,b) \ - eth_copy_and_sum((s),__mem_pci(c),(l),(b)) - static inline int check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature, int length) diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 288f76b166d..5f60b422090 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -182,9 +182,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) #define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) -#define eth_io_copy_and_sum(s,c,l,b) \ - eth_copy_and_sum((s),__mem_pci(c),(l),(b)) - #elif !defined(readb) #define readb(c) (__readwrite_bug("readb"),0) @@ -194,8 +191,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writew(v,c) __readwrite_bug("writew") #define writel(v,c) __readwrite_bug("writel") -#define eth_io_copy_and_sum(s,c,l,b) __readwrite_bug("eth_io_copy_and_sum") - #define check_signature(io,sig,len) (0) #endif /* __mem_pci */ diff --git a/include/asm-cris/io.h b/include/asm-cris/io.h index 716c69bc58f..d196dd6b2df 100644 --- a/include/asm-cris/io.h +++ b/include/asm-cris/io.h @@ -121,11 +121,6 @@ static inline void writel(unsigned int b, volatile void __iomem *addr) #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) -/* - * Again, CRIS does not require mem IO specific function. - */ - -#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d)) /* The following is junk needed for the arch-independent code but which * we never use in the CRIS port diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h index 86ff5e83be2..59fe616933c 100644 --- a/include/asm-i386/io.h +++ b/include/asm-i386/io.h @@ -218,12 +218,6 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int */ #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) -/* - * Again, i386 does not require mem IO specific function. - */ - -#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d)) - /* * Cache management * diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 67f08107890..b6a2eb81662 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -555,12 +555,6 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *); */ #define __ISA_IO_base ((char *)(isa_slot_offset)) -/* - * We don't have csum_partial_copy_fromio() yet, so we cheat here and - * just copy it. The net code will then do the checksum later. - */ -#define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len)) - /* * The caches on some architectures aren't dma-coherent and have need to * handle this in software. There are three types of operations that diff --git a/include/asm-parisc/io.h b/include/asm-parisc/io.h index c1963ce19dd..ca46e7cc094 100644 --- a/include/asm-parisc/io.h +++ b/include/asm-parisc/io.h @@ -191,15 +191,6 @@ void memset_io(volatile void __iomem *addr, unsigned char val, int count); void memcpy_fromio(void *dst, const volatile void __iomem *src, int count); void memcpy_toio(volatile void __iomem *dst, const void *src, int count); -/* - * XXX - We don't have csum_partial_copy_fromio() yet, so we cheat here and - * just copy it. The net code will then do the checksum later. Presently - * only used by some shared memory 8390 Ethernet cards anyway. - */ - -#define eth_io_copy_and_sum(skb,src,len,unused) \ - memcpy_fromio((skb)->data,(src),(len)) - /* Port-space IO */ #define inb_p inb diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index ccf1a9bb2e4..95d590423cf 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -358,8 +358,6 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int } #endif -#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(void __iomem *)(b),(c),(d)) - /* * Map in an area of physical address space, for accessing * I/O devices etc. diff --git a/include/asm-x86_64/io.h b/include/asm-x86_64/io.h index 6ee9fadaaac..f5d84bb7c94 100644 --- a/include/asm-x86_64/io.h +++ b/include/asm-x86_64/io.h @@ -248,12 +248,6 @@ void memset_io(volatile void __iomem *a, int b, size_t c); */ #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) -/* - * Again, x86-64 does not require mem IO specific function. - */ - -#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void *)(b),(c),(d)) - /* Nothing to do */ #define dma_cache_inv(_start,_size) do { } while (0) -- cgit v1.2.3 From b4377356450e2358f5f92d34f130d6cb6574bf76 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:39:40 +0000 Subject: [PATCH] iscsi endianness annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/scsi/iscsi_proto.h | 46 +++++++++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h index 02f6e4b9e69..4a44278ed76 100644 --- a/include/scsi/iscsi_proto.h +++ b/include/scsi/iscsi_proto.h @@ -40,6 +40,14 @@ } #define zero_data(p) {p[0]=0;p[1]=0;p[2]=0;} +/* initiator tags; opaque for target */ +typedef uint32_t __bitwise__ itt_t; +/* below makes sense only for initiator that created this tag */ +#define build_itt(itt, id, age) ((__force itt_t)\ + ((itt) | ((id) << ISCSI_CID_SHIFT) | ((age) << ISCSI_AGE_SHIFT))) +#define get_itt(itt) ((__force uint32_t)(itt_t)(itt) & ISCSI_ITT_MASK) +#define RESERVED_ITT ((__force itt_t)0xffffffff) + /* * iSCSI Template Message Header */ @@ -50,7 +58,7 @@ struct iscsi_hdr { uint8_t hlength; /* AHSs total length */ uint8_t dlength[3]; /* Data length */ uint8_t lun[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag, opaque for target */ __be32 ttt; /* Target Task Tag */ __be32 statsn; __be32 exp_statsn; @@ -111,7 +119,7 @@ struct iscsi_cmd { uint8_t hlength; uint8_t dlength[3]; uint8_t lun[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be32 data_length; __be32 cmdsn; __be32 exp_statsn; @@ -148,7 +156,7 @@ struct iscsi_cmd_rsp { uint8_t hlength; uint8_t dlength[3]; uint8_t rsvd[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be32 rsvd1; __be32 statsn; __be32 exp_cmdsn; @@ -206,7 +214,7 @@ struct iscsi_nopout { uint8_t rsvd3; uint8_t dlength[3]; uint8_t lun[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be32 ttt; /* Target Transfer Tag */ __be32 cmdsn; __be32 exp_statsn; @@ -221,7 +229,7 @@ struct iscsi_nopin { uint8_t rsvd3; uint8_t dlength[3]; uint8_t lun[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be32 ttt; /* Target Transfer Tag */ __be32 statsn; __be32 exp_cmdsn; @@ -237,8 +245,8 @@ struct iscsi_tm { uint8_t hlength; uint8_t dlength[3]; uint8_t lun[8]; - __be32 itt; /* Initiator Task Tag */ - __be32 rtt; /* Reference Task Tag */ + itt_t itt; /* Initiator Task Tag */ + itt_t rtt; /* Reference Task Tag */ __be32 cmdsn; __be32 exp_statsn; __be32 refcmdsn; @@ -267,8 +275,8 @@ struct iscsi_tm_rsp { uint8_t hlength; uint8_t dlength[3]; uint8_t rsvd2[8]; - __be32 itt; /* Initiator Task Tag */ - __be32 rtt; /* Reference Task Tag */ + itt_t itt; /* Initiator Task Tag */ + itt_t rtt; /* Reference Task Tag */ __be32 statsn; __be32 exp_cmdsn; __be32 max_cmdsn; @@ -293,7 +301,7 @@ struct iscsi_r2t_rsp { uint8_t hlength; uint8_t dlength[3]; uint8_t lun[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be32 ttt; /* Target Transfer Tag */ __be32 statsn; __be32 exp_cmdsn; @@ -311,7 +319,7 @@ struct iscsi_data { uint8_t rsvd3; uint8_t dlength[3]; uint8_t lun[8]; - __be32 itt; + itt_t itt; __be32 ttt; __be32 rsvd4; __be32 exp_statsn; @@ -331,7 +339,7 @@ struct iscsi_data_rsp { uint8_t hlength; uint8_t dlength[3]; uint8_t lun[8]; - __be32 itt; + itt_t itt; __be32 ttt; __be32 statsn; __be32 exp_cmdsn; @@ -355,7 +363,7 @@ struct iscsi_text { uint8_t hlength; uint8_t dlength[3]; uint8_t rsvd4[8]; - __be32 itt; + itt_t itt; __be32 ttt; __be32 cmdsn; __be32 exp_statsn; @@ -373,7 +381,7 @@ struct iscsi_text_rsp { uint8_t hlength; uint8_t dlength[3]; uint8_t rsvd4[8]; - __be32 itt; + itt_t itt; __be32 ttt; __be32 statsn; __be32 exp_cmdsn; @@ -392,7 +400,7 @@ struct iscsi_login { uint8_t dlength[3]; uint8_t isid[6]; /* Initiator Session ID */ __be16 tsih; /* Target Session Handle */ - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be16 cid; __be16 rsvd3; __be32 cmdsn; @@ -421,7 +429,7 @@ struct iscsi_login_rsp { uint8_t dlength[3]; uint8_t isid[6]; /* Initiator Session ID */ __be16 tsih; /* Target Session Handle */ - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be32 rsvd3; __be32 statsn; __be32 exp_cmdsn; @@ -478,7 +486,7 @@ struct iscsi_logout { uint8_t hlength; uint8_t dlength[3]; uint8_t rsvd2[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be16 cid; uint8_t rsvd3[2]; __be32 cmdsn; @@ -505,7 +513,7 @@ struct iscsi_logout_rsp { uint8_t hlength; uint8_t dlength[3]; uint8_t rsvd3[8]; - __be32 itt; /* Initiator Task Tag */ + itt_t itt; /* Initiator Task Tag */ __be32 rsvd4; __be32 statsn; __be32 exp_cmdsn; @@ -528,7 +536,7 @@ struct iscsi_snack { uint8_t opcode; uint8_t flags; uint8_t rsvd2[14]; - __be32 itt; + itt_t itt; __be32 begrun; __be32 runlength; __be32 exp_statsn; -- cgit v1.2.3 From f336953bfdee8d5e7f69cb8e080704546541f04b Mon Sep 17 00:00:00 2001 From: Evgeniy Dushistov Date: Thu, 8 Feb 2007 14:20:25 -0800 Subject: [PATCH] ufs: restore back support of openstep This is a fix of regression, which triggered by ~2.6.16. Patch with name ufs-directory-and-page-cache-from-blocks-to-pages.patch: in additional to conversation from block to page cache mechanism added new checks of directory integrity, one of them that directory entry do not across directory chunks. But some kinds of UFS: OpenStep UFS and Apple UFS (looks like these are the same filesystems) have different directory chunk size, then common UFSes(BSD and Solaris UFS). So this patch adds ability to works with variable size of directory chunks, and set it for ufstype=openstep to right size. Tested on darwin ufs. Signed-off-by: Evgeniy Dushistov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ufs_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/ufs_fs.h b/include/linux/ufs_fs.h index 28967eda9d7..d3a4f994a5d 100644 --- a/include/linux/ufs_fs.h +++ b/include/linux/ufs_fs.h @@ -789,6 +789,7 @@ struct ufs_sb_private_info { __u32 s_maxsymlinklen;/* upper limit on fast symlinks' size */ __s32 fs_magic; /* filesystem magic */ + unsigned int s_dirblksize; }; /* -- cgit v1.2.3 From aaf68cfbf2241d24d46583423f6bff5c47e088b3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Feb 2007 14:20:30 -0800 Subject: [PATCH] knfsd: fix a race in closing NFSd connections If you lose this race, it can iput a socket inode twice and you get a BUG in fs/inode.c When I added the option for user-space to close a socket, I added some cruft to svc_delete_socket so that I could call that function when closing a socket per user-space request. This was the wrong thing to do. I should have just set SK_CLOSE and let normal mechanisms do the work. Not only wrong, but buggy. The locking is all wrong and it openned up a race where-by a socket could be closed twice. So this patch: Introduces svc_close_socket which sets SK_CLOSE then either leave the close up to a thread, or calls svc_delete_socket if it can get SK_BUSY. Adds a bias to sk_busy which is removed when SK_DEAD is set, This avoid races around shutting down the socket. Changes several 'spin_lock' to 'spin_lock_bh' where the _bh was missing. Bugzilla-url: http://bugzilla.kernel.org/show_bug.cgi?id=7916 Signed-off-by: Neil Brown Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sunrpc/svcsock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index 98b21ad370f..db312a1e2ee 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -63,7 +63,7 @@ struct svc_sock { * Function prototypes. */ int svc_makesock(struct svc_serv *, int, unsigned short); -void svc_delete_socket(struct svc_sock *); +void svc_close_socket(struct svc_sock *); int svc_recv(struct svc_rqst *, long); int svc_send(struct svc_rqst *); void svc_drop(struct svc_rqst *); -- cgit v1.2.3 From da6e1a32fb8d7539a27f699c8671f64d7fefd0cc Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Thu, 8 Feb 2007 14:20:37 -0800 Subject: [PATCH] md: avoid possible BUG_ON in md bitmap handling md/bitmap tracks how many active write requests are pending on blocks associated with each bit in the bitmap, so that it knows when it can clear the bit (when count hits zero). The counter has 14 bits of space, so if there are ever more than 16383, we cannot cope. Currently the code just calles BUG_ON as "all" drivers have request queue limits much smaller than this. However is seems that some don't. Apparently some multipath configurations can allow more than 16383 concurrent write requests. So, in this unlikely situation, instead of calling BUG_ON we now wait for the count to drop down a bit. This requires a new wait_queue_head, some waiting code, and a wakeup call. Tested by limiting the counter to 20 instead of 16383 (writes go a lot slower in that case...). Signed-off-by: Neil Brown Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/raid/bitmap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h index ebd42a3710b..6db9a4c1535 100644 --- a/include/linux/raid/bitmap.h +++ b/include/linux/raid/bitmap.h @@ -247,6 +247,7 @@ struct bitmap { atomic_t pending_writes; /* pending writes to the bitmap file */ wait_queue_head_t write_wait; + wait_queue_head_t overflow_wait; }; -- cgit v1.2.3 From fa5dc22f8586cc3742413dd05f5cd9e039dfab9e Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 8 Feb 2007 14:20:41 -0800 Subject: [PATCH] Add install_special_mapping This patch adds a utility function install_special_mapping, for creating a special vma using a fixed set of preallocated pages as backing, such as for a vDSO. This consolidates some nearly identical code used for vDSO mapping reimplemented for different architectures. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/mm.h b/include/linux/mm.h index 2d2c08d5f47..bb793a4c8e9 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1030,6 +1030,9 @@ extern struct vm_area_struct *copy_vma(struct vm_area_struct **, unsigned long addr, unsigned long len, pgoff_t pgoff); extern void exit_mmap(struct mm_struct *); extern int may_expand_vm(struct mm_struct *mm, unsigned long npages); +extern int install_special_mapping(struct mm_struct *mm, + unsigned long addr, unsigned long len, + unsigned long flags, struct page **pages); extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); -- cgit v1.2.3 From dc5882b20a69fb16219cc61ae3d21d73dd6360a7 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 8 Feb 2007 14:20:43 -0800 Subject: [PATCH] x86_64 ia32 vDSO: use install_special_mapping This patch uses install_special_mapping for the ia32 vDSO setup, consolidating duplicated code. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-x86_64/proto.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h index 6d324b83897..a6d2ff5c69b 100644 --- a/include/asm-x86_64/proto.h +++ b/include/asm-x86_64/proto.h @@ -81,7 +81,6 @@ extern void swap_low_mappings(void); extern void __show_regs(struct pt_regs * regs); extern void show_regs(struct pt_regs * regs); -extern char *syscall32_page; extern void syscall32_cpu_init(void); extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end); -- cgit v1.2.3 From 1274c1088e54aa178d8546a3830fb533062d01f4 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 7 Feb 2007 12:03:14 +1000 Subject: [PATCH] m68knommu: removed include of system.h from bitops Remove include of asm/system.h, not needed. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- include/asm-m68knommu/bitops.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h index d7fa7d9c0e0..7d6075d9b5c 100644 --- a/include/asm-m68knommu/bitops.h +++ b/include/asm-m68knommu/bitops.h @@ -7,7 +7,6 @@ #include #include /* swab32 */ -#include /* save_flags */ #ifdef __KERNEL__ -- cgit v1.2.3 From 9b13b682a68d5bcf09c75da73d4e61d92eba4c84 Mon Sep 17 00:00:00 2001 From: Alan Date: Thu, 7 Dec 2006 08:59:14 -0800 Subject: [PATCH] pata_it8213: Add new driver for the IT8213 card Add a driver for the IT8213 which is a single channel ICH-ish PATA controller. As it is very different to the IT8211/2 it gets its own driver. There is a legacy drivers/ide driver also available and I'll post that once I get time to test it all out (probably early January). If anyone else needs the drivers/ide driver and wants to do the merge for drivers/ide (Bart ??) then I'll forward it. [akpm@osdl.org: add PCI ID, constify needed_pio[]] Signed-off-by: Alan Cox Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 6252cb9092d..4c8966a082a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1633,6 +1633,7 @@ #define PCI_VENDOR_ID_ITE 0x1283 #define PCI_DEVICE_ID_ITE_8211 0x8211 #define PCI_DEVICE_ID_ITE_8212 0x8212 +#define PCI_DEVICE_ID_ITE_8213 0x8213 #define PCI_DEVICE_ID_ITE_8872 0x8872 #define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 -- cgit v1.2.3 From f20b16ff7c19d1c369ee07470952aca093551ed0 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 11 Dec 2006 11:14:06 -0500 Subject: [libata] trim trailing whitespace Most of these contributed by that mysterious figger known as A.C. Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 91bb8ceef0b..84f12e8cae7 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -308,7 +308,7 @@ enum { * most devices. */ ATA_SPINUP_WAIT = 8000, - + /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ -- cgit v1.2.3 From d4013f07bd5380178bf28ef1cd76649779367288 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 15 Dec 2006 13:08:50 -0800 Subject: [PATCH] pci: Move PCI_VDEVICE from libata to core Updated diff which doesn't move the comment as per Jeff's request and corrects the docs as per report on l/k Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/libata.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 84f12e8cae7..dab4dc505ce 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -109,10 +109,6 @@ static inline u32 ata_msg_init(int dval, int default_msg_enable_bits) #define ATA_TAG_POISON 0xfafbfcfdU /* move to PCI layer? */ -#define PCI_VDEVICE(vendor, device) \ - PCI_VENDOR_ID_##vendor, (device), \ - PCI_ANY_ID, PCI_ANY_ID, 0, 0 - static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) { return &pdev->dev; -- cgit v1.2.3 From c9f89475a5b184e9a6077b995ce340e6804c1b1a Mon Sep 17 00:00:00 2001 From: Conke Hu Date: Tue, 9 Jan 2007 05:32:51 -0500 Subject: Add pci class code for SATA & AHCI, and replace some magic numbers. Signed-off-by: Conke Hu Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4c8966a082a..e67b68ca235 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -15,6 +15,8 @@ #define PCI_CLASS_STORAGE_FLOPPY 0x0102 #define PCI_CLASS_STORAGE_IPI 0x0103 #define PCI_CLASS_STORAGE_RAID 0x0104 +#define PCI_CLASS_STORAGE_SATA 0x0106 +#define PCI_CLASS_STORAGE_SATA_AHCI 0x010601 #define PCI_CLASS_STORAGE_SAS 0x0107 #define PCI_CLASS_STORAGE_OTHER 0x0180 -- cgit v1.2.3 From a0cf733b333eeeafb7324e2897448006c693c26c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 2 Jan 2007 20:18:49 +0900 Subject: libata: straighten out ATA_ID_* constants * Kill _OFS suffixes in ATA_ID_{SERNO|FW_REV|PROD}_OFS for consistency with other ATA_ID_* constants. * Kill ATA_SERNO_LEN * Add and use ATA_ID_SERNO_LEN, ATA_ID_FW_REV_LEN and ATA_ID_PROD_LEN. This change also makes ata_device_blacklisted() use proper length for fwrev. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/ata.h | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/ata.h b/include/linux/ata.h index 1df941648a5..3a50739e25a 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -44,9 +44,9 @@ enum { ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */ ATA_ID_WORDS = 256, - ATA_ID_SERNO_OFS = 10, - ATA_ID_FW_REV_OFS = 23, - ATA_ID_PROD_OFS = 27, + ATA_ID_SERNO = 10, + ATA_ID_FW_REV = 23, + ATA_ID_PROD = 27, ATA_ID_OLD_PIO_MODES = 51, ATA_ID_FIELD_VALID = 53, ATA_ID_MWDMA_MODES = 63, @@ -58,8 +58,11 @@ enum { ATA_ID_MAJOR_VER = 80, ATA_ID_PIO4 = (1 << 1), + ATA_ID_SERNO_LEN = 20, + ATA_ID_FW_REV_LEN = 8, + ATA_ID_PROD_LEN = 40, + ATA_PCI_CTL_OFS = 2, - ATA_SERNO_LEN = 20, ATA_UDMA0 = (1 << 0), ATA_UDMA1 = ATA_UDMA0 | (1 << 1), ATA_UDMA2 = ATA_UDMA1 | (1 << 2), -- cgit v1.2.3 From 553c4aa630af7bc885e056d0436e4eb7f238579b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 26 Dec 2006 19:39:50 +0900 Subject: libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index dab4dc505ce..a8ecaaad55f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -716,7 +716,7 @@ extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_i unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg); -extern void ata_pci_device_do_resume(struct pci_dev *pdev); +extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev); extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); extern int ata_pci_device_resume(struct pci_dev *pdev); extern int ata_pci_clear_simplex(struct pci_dev *pdev); -- cgit v1.2.3 From 726f0785b608d09bdd64bdbadc09217ebbf9920e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 3 Jan 2007 17:30:39 +0900 Subject: libata: kill qc->nsect and cursect libata used two separate sets of variables to record request size and current offset for ATA and ATAPI. This is confusing and fragile. This patch replaces qc->nsect/cursect with qc->nbytes/curbytes and kills them. Also, ata_pio_sector() is updated to use bytes for qc->cursg_ofs instead of sectors. The field used to be used in bytes for ATAPI and in sectors for ATA. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index a8ecaaad55f..a2458dfefb1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -427,9 +427,6 @@ struct ata_queued_cmd { unsigned int pad_len; - unsigned int nsect; - unsigned int cursect; - unsigned int nbytes; unsigned int curbytes; @@ -1145,8 +1142,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->dma_dir = DMA_NONE; qc->__sg = NULL; qc->flags = 0; - qc->cursect = qc->cursg = qc->cursg_ofs = 0; - qc->nsect = 0; + qc->cursg = qc->cursg_ofs = 0; qc->nbytes = qc->curbytes = 0; qc->n_elem = 0; qc->err_mask = 0; -- cgit v1.2.3 From 9ac7849e35f705830f7b016ff272b0ff1f7ff759 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 20 Jan 2007 16:00:26 +0900 Subject: devres: device resource management Implement device resource management, in short, devres. A device driver can allocate arbirary size of devres data which is associated with a release function. On driver detach, release function is invoked on the devres data, then, devres data is freed. devreses are typed by associated release functions. Some devreses are better represented by single instance of the type while others need multiple instances sharing the same release function. Both usages are supported. devreses can be grouped using devres group such that a device driver can easily release acquired resources halfway through initialization or selectively release resources (e.g. resources for port 1 out of 4 ports). This patch adds devres core including documentation and the following managed interfaces. * alloc/free : devm_kzalloc(), devm_kzfree() * IO region : devm_request_region(), devm_release_region() * IRQ : devm_request_irq(), devm_free_irq() * DMA : dmam_alloc_coherent(), dmam_free_coherent(), dmam_declare_coherent_memory(), dmam_pool_create(), dmam_pool_destroy() * PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed() * iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(), devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(), pcim_iomap(), pcim_iounmap() Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/device.h | 38 ++++++++++++++++++++++++++++++++++++++ include/linux/dma-mapping.h | 29 ++++++++++++++++++++++++++++- include/linux/dmapool.h | 7 +++++++ include/linux/interrupt.h | 6 ++++++ include/linux/io.h | 17 +++++++++++++++++ include/linux/ioport.h | 20 ++++++++++++++++++++ include/linux/pci.h | 9 +++++++++ 7 files changed, 125 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/device.h b/include/linux/device.h index 5ca1cdba563..26e4692f2d1 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -354,6 +354,41 @@ extern int __must_check device_create_bin_file(struct device *dev, struct bin_attribute *attr); extern void device_remove_bin_file(struct device *dev, struct bin_attribute *attr); + +/* device resource management */ +typedef void (*dr_release_t)(struct device *dev, void *res); +typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data); + +#ifdef CONFIG_DEBUG_DEVRES +extern void * __devres_alloc(dr_release_t release, size_t size, gfp_t gfp, + const char *name); +#define devres_alloc(release, size, gfp) \ + __devres_alloc(release, size, gfp, #release) +#else +extern void * devres_alloc(dr_release_t release, size_t size, gfp_t gfp); +#endif +extern void devres_free(void *res); +extern void devres_add(struct device *dev, void *res); +extern void * devres_find(struct device *dev, dr_release_t release, + dr_match_t match, void *match_data); +extern void * devres_get(struct device *dev, void *new_res, + dr_match_t match, void *match_data); +extern void * devres_remove(struct device *dev, dr_release_t release, + dr_match_t match, void *match_data); +extern int devres_destroy(struct device *dev, dr_release_t release, + dr_match_t match, void *match_data); + +/* devres group */ +extern void * __must_check devres_open_group(struct device *dev, void *id, + gfp_t gfp); +extern void devres_close_group(struct device *dev, void *id); +extern void devres_remove_group(struct device *dev, void *id); +extern int devres_release_group(struct device *dev, void *id); + +/* managed kzalloc/kfree for device drivers, no kmalloc, always use kzalloc */ +extern void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp); +extern void devm_kfree(struct device *dev, void *p); + struct device { struct klist klist_children; struct klist_node knode_parent; /* node in sibling list */ @@ -397,6 +432,9 @@ struct device { /* arch specific additions */ struct dev_archdata archdata; + spinlock_t devres_lock; + struct list_head devres_head; + /* class_device migration path */ struct list_head node; struct class *class; diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index ff203c465fe..9a663c6db16 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -66,6 +66,33 @@ dma_mark_declared_memory_occupied(struct device *dev, } #endif -#endif +/* + * Managed DMA API + */ +extern void *dmam_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp); +extern void dmam_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle); +extern void *dmam_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp); +extern void dmam_free_noncoherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle); +#ifdef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY +extern int dmam_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, + int flags); +extern void dmam_release_declared_memory(struct device *dev); +#else /* ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY */ +static inline int dmam_declare_coherent_memory(struct device *dev, + dma_addr_t bus_addr, dma_addr_t device_addr, + size_t size, gfp_t gfp) +{ + return 0; +} +static inline void dmam_release_declared_memory(struct device *dev) +{ +} +#endif /* ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY */ +#endif diff --git a/include/linux/dmapool.h b/include/linux/dmapool.h index 76f12f46db7..022e34fcbd1 100644 --- a/include/linux/dmapool.h +++ b/include/linux/dmapool.h @@ -24,5 +24,12 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags, void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t addr); +/* + * Managed DMA pool + */ +struct dma_pool *dmam_pool_create(const char *name, struct device *dev, + size_t size, size_t align, size_t allocation); +void dmam_pool_destroy(struct dma_pool *pool); + #endif diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index e36e86c869f..5a8ba0b8ccb 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -83,6 +84,11 @@ extern int request_irq(unsigned int, irq_handler_t handler, unsigned long, const char *, void *); extern void free_irq(unsigned int, void *); +extern int devm_request_irq(struct device *dev, unsigned int irq, + irq_handler_t handler, unsigned long irqflags, + const char *devname, void *dev_id); +extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id); + /* * On lockdep we dont want to enable hardirqs in hardirq * context. Use local_irq_enable_in_hardirq() to annotate diff --git a/include/linux/io.h b/include/linux/io.h index 81877ea3930..f5edf9c5de0 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -28,6 +28,23 @@ void __iowrite64_copy(void __iomem *to, const void *from, size_t count); int ioremap_page_range(unsigned long addr, unsigned long end, unsigned long phys_addr, pgprot_t prot); +/* + * Managed iomap interface + */ +void __iomem * devm_ioport_map(struct device *dev, unsigned long port, + unsigned int nr); +void devm_ioport_unmap(struct device *dev, void __iomem *addr); + +void __iomem * devm_ioremap(struct device *dev, unsigned long offset, + unsigned long size); +void __iomem * devm_ioremap_nocache(struct device *dev, unsigned long offset, + unsigned long size); +void devm_iounmap(struct device *dev, void __iomem *addr); + +void __iomem * pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); +void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr); +void __iomem * const * pcim_iomap_table(struct pci_dev *pdev); + /** * check_signature - find BIOS signatures * @io_addr: mmio address to check diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 15228d79c5b..6859a3b1408 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -137,4 +137,24 @@ static inline int __deprecated check_region(resource_size_t s, { return __check_region(&ioport_resource, s, n); } + +/* Wrappers for managed devices */ +struct device; +#define devm_request_region(dev,start,n,name) \ + __devm_request_region(dev, &ioport_resource, (start), (n), (name)) +#define devm_request_mem_region(dev,start,n,name) \ + __devm_request_region(dev, &iomem_resource, (start), (n), (name)) + +extern struct resource * __devm_request_region(struct device *dev, + struct resource *parent, resource_size_t start, + resource_size_t n, const char *name); + +#define devm_release_region(start,n) \ + __devm_release_region(dev, &ioport_resource, (start), (n)) +#define devm_release_mem_region(start,n) \ + __devm_release_region(dev, &iomem_resource, (start), (n)) + +extern void __devm_release_region(struct device *dev, struct resource *parent, + resource_size_t start, resource_size_t n); + #endif /* _LINUX_IOPORT_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 805412cc687..9e3042e7e1c 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -167,6 +167,7 @@ struct pci_dev { unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; unsigned int msix_enabled:1; + unsigned int is_managed:1; atomic_t enable_cnt; /* pci_enable_device has been called */ u32 saved_config_space[16]; /* config space saved at suspend time */ @@ -528,6 +529,14 @@ static inline int pci_write_config_dword(struct pci_dev *dev, int where, u32 val int __must_check pci_enable_device(struct pci_dev *dev); int __must_check pci_enable_device_bars(struct pci_dev *dev, int mask); +int __must_check pcim_enable_device(struct pci_dev *pdev); +void pcim_pin_device(struct pci_dev *pdev); + +static inline int pci_is_managed(struct pci_dev *pdev) +{ + return pdev->is_managed; +} + void pci_disable_device(struct pci_dev *dev); void pci_set_master(struct pci_dev *dev); #define HAVE_PCI_SET_MWI -- cgit v1.2.3 From 0529c159dbdd79794796c1b50b39442d72efbe97 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 20 Jan 2007 16:00:26 +0900 Subject: libata: implement ata_host_detach() Implement ata_host_detach() which calls ata_port_detach() for each port in the host and export it. ata_port_detach() is now internal and thus un-exported. ata_host_detach() will be used as the 'deregister from libata layer' function after devres conversion. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index a2458dfefb1..e9a0cfdcfe2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -719,7 +719,7 @@ extern int ata_pci_device_resume(struct pci_dev *pdev); extern int ata_pci_clear_simplex(struct pci_dev *pdev); #endif /* CONFIG_PCI */ extern int ata_device_add(const struct ata_probe_ent *ent); -extern void ata_port_detach(struct ata_port *ap); +extern void ata_host_detach(struct ata_host *host); extern void ata_host_init(struct ata_host *, struct device *, unsigned long, const struct ata_port_operations *); extern void ata_host_remove(struct ata_host *host); -- cgit v1.2.3 From f0d36efdc624beb3d9e29b9ab9e9537bf0f25d5b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 20 Jan 2007 16:00:28 +0900 Subject: libata: update libata core layer to use devres Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index e9a0cfdcfe2..f96277ed184 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include @@ -726,7 +726,6 @@ extern void ata_host_remove(struct ata_host *host); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); -extern int ata_scsi_release(struct Scsi_Host *host); extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); @@ -1227,14 +1226,14 @@ static inline unsigned int __ac_err_mask(u8 status) static inline int ata_pad_alloc(struct ata_port *ap, struct device *dev) { ap->pad_dma = 0; - ap->pad = dma_alloc_coherent(dev, ATA_DMA_PAD_BUF_SZ, - &ap->pad_dma, GFP_KERNEL); + ap->pad = dmam_alloc_coherent(dev, ATA_DMA_PAD_BUF_SZ, + &ap->pad_dma, GFP_KERNEL); return (ap->pad == NULL) ? -ENOMEM : 0; } static inline void ata_pad_free(struct ata_port *ap, struct device *dev) { - dma_free_coherent(dev, ATA_DMA_PAD_BUF_SZ, ap->pad, ap->pad_dma); + dmam_free_coherent(dev, ATA_DMA_PAD_BUF_SZ, ap->pad, ap->pad_dma); } static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host) -- cgit v1.2.3 From b878ca5d37953ad1c4578b225a13a3c3e7e743b7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 20 Jan 2007 16:00:28 +0900 Subject: libata: remove unused functions Now that all LLDs are converted to use devres, default stop callbacks are unused. Remove them. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index f96277ed184..cebbcc8d45f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -722,7 +722,6 @@ extern int ata_device_add(const struct ata_probe_ent *ent); extern void ata_host_detach(struct ata_host *host); extern void ata_host_init(struct ata_host *, struct device *, unsigned long, const struct ata_port_operations *); -extern void ata_host_remove(struct ata_host *host); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); @@ -768,8 +767,6 @@ extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); -extern void ata_port_stop (struct ata_port *ap); -extern void ata_host_stop (struct ata_host *host); extern irqreturn_t ata_interrupt (int irq, void *dev_instance); extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data); @@ -856,7 +853,6 @@ struct pci_bits { unsigned long val; }; -extern void ata_pci_host_stop (struct ata_host *host); extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); -- cgit v1.2.3 From d24bbbf251e70bf984cbaa9b1fcadc5f56fc3ae9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 20 Jan 2007 16:00:28 +0900 Subject: devres: implement pcim_iomap_regions() Implement pcim_iomap_regions(). This function takes mask of BARs to request and iomap. No BAR should have length of zero. BARs are iomapped using pcim_iomap_table(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/io.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/io.h b/include/linux/io.h index f5edf9c5de0..45a9c944cb0 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -45,6 +45,8 @@ void __iomem * pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr); void __iomem * const * pcim_iomap_table(struct pci_dev *pdev); +int pcim_iomap_regions(struct pci_dev *pdev, u16 mask, const char *name); + /** * check_signature - find BIOS signatures * @io_addr: mmio address to check -- cgit v1.2.3 From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 68 +++++++++++++++++++++----------------------------- 1 file changed, 28 insertions(+), 40 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index cebbcc8d45f..308bb8cbe50 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -348,21 +348,21 @@ typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes); typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes); struct ata_ioports { - unsigned long cmd_addr; - unsigned long data_addr; - unsigned long error_addr; - unsigned long feature_addr; - unsigned long nsect_addr; - unsigned long lbal_addr; - unsigned long lbam_addr; - unsigned long lbah_addr; - unsigned long device_addr; - unsigned long status_addr; - unsigned long command_addr; - unsigned long altstatus_addr; - unsigned long ctl_addr; - unsigned long bmdma_addr; - unsigned long scr_addr; + void __iomem *cmd_addr; + void __iomem *data_addr; + void __iomem *error_addr; + void __iomem *feature_addr; + void __iomem *nsect_addr; + void __iomem *lbal_addr; + void __iomem *lbam_addr; + void __iomem *lbah_addr; + void __iomem *device_addr; + void __iomem *status_addr; + void __iomem *command_addr; + void __iomem *altstatus_addr; + void __iomem *ctl_addr; + void __iomem *bmdma_addr; + void __iomem *scr_addr; }; struct ata_probe_ent { @@ -381,7 +381,7 @@ struct ata_probe_ent { unsigned int irq_flags; unsigned long port_flags; unsigned long _host_flags; - void __iomem *mmio_base; + void __iomem * const *iomap; void *private_data; /* port_info for the secondary port. Together with irq2, it's @@ -398,7 +398,7 @@ struct ata_host { struct device *dev; unsigned long irq; unsigned long irq2; - void __iomem *mmio_base; + void __iomem * const *iomap; unsigned int n_ports; void *private_data; const struct ata_port_operations *ops; @@ -768,12 +768,10 @@ extern u8 ata_altstatus(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); extern irqreturn_t ata_interrupt (int irq, void *dev_instance); -extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data); -extern void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data); -extern void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data); +extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); +extern void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern void ata_noop_qc_prep(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc); @@ -1084,10 +1082,9 @@ static inline u8 ata_wait_idle(struct ata_port *ap) u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ))) { - unsigned long l = ap->ioaddr.status_addr; if (ata_msg_warn(ap)) - printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n", - status, l); + printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%p\n", + status, ap->ioaddr.status_addr); } return status; @@ -1172,20 +1169,11 @@ static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) printk(KERN_ERR "abnormal status 0x%X\n", status); /* get controller status; clear intr, err bits */ - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - host_stat = readb(mmio + ATA_DMA_STATUS); - writeb(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, - mmio + ATA_DMA_STATUS); - - post_stat = readb(mmio + ATA_DMA_STATUS); - } else { - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - outb(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, - ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - - post_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - } + host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, + ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + + post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); if (ata_msg_intr(ap)) printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", -- cgit v1.2.3 From 7f25377043925554cb9f3f9d8ada3390f71a5d10 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 2 Feb 2007 18:07:15 -0800 Subject: git-libata-all: forward declare struct device In file included from drivers/infiniband/hw/ipath/ipath_diag.c:44: include/linux/io.h:35: warning: 'struct device' declared inside parameter list include/linux/io.h:35: warning: its scope is only this definition or declaration Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/io.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/io.h b/include/linux/io.h index 45a9c944cb0..9e419ebfc98 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -22,6 +22,8 @@ #include #include +struct device; + void __iowrite32_copy(void __iomem *to, const void *from, size_t count); void __iowrite64_copy(void __iomem *to, const void *from, size_t count); -- cgit v1.2.3 From 836250069fc0eeebe8b6aed772281535cc6e34f9 Mon Sep 17 00:00:00 2001 From: Akira Iguchi Date: Fri, 26 Jan 2007 16:27:32 +0900 Subject: libata: add another IRQ calls (core and headers) This patch is against the libata core and headers. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki Signed-off-by: Akira Iguchi Signed-off-by: Jeff Garzik --- include/linux/libata.h | 42 ++++++------------------------------------ 1 file changed, 6 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 308bb8cbe50..bdfe6ea8edf 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -632,6 +632,8 @@ struct ata_port_operations { irq_handler_t irq_handler; void (*irq_clear) (struct ata_port *); + u8 (*irq_on) (struct ata_port *); + u8 (*irq_ack) (struct ata_port *ap, unsigned int chk_drq); u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg); void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, @@ -813,6 +815,10 @@ extern void ata_scsi_slave_destroy(struct scsi_device *sdev); extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth); extern struct ata_device *ata_dev_pair(struct ata_device *adev); +extern u8 ata_irq_on(struct ata_port *ap); +extern u8 ata_dummy_irq_on(struct ata_port *ap); +extern u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq); +extern u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq); /* * Timing helpers @@ -1147,42 +1153,6 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->result_tf.feature = 0; } -/** - * ata_irq_ack - Acknowledge a device interrupt. - * @ap: Port on which interrupts are enabled. - * - * Wait up to 10 ms for legacy IDE device to become idle (BUSY - * or BUSY+DRQ clear). Obtain dma status and port status from - * device. Clear the interrupt. Return port status. - * - * LOCKING: - */ - -static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) -{ - unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; - u8 host_stat, post_stat, status; - - status = ata_busy_wait(ap, bits, 1000); - if (status & bits) - if (ata_msg_err(ap)) - printk(KERN_ERR "abnormal status 0x%X\n", status); - - /* get controller status; clear intr, err bits */ - host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, - ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - - post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - - if (ata_msg_intr(ap)) - printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", - __FUNCTION__, - host_stat, post_stat, status); - - return status; -} - static inline int ata_try_flush_cache(const struct ata_device *dev) { return ata_id_wcache_enabled(dev->id) || -- cgit v1.2.3 From 49554c19569c91d0943b67ca731c9abfc857883f Mon Sep 17 00:00:00 2001 From: Alan Date: Mon, 5 Feb 2007 16:17:19 +0000 Subject: ata: Add defines for the iordy bits IORDY and IORDY enable/disable flags. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/ata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/ata.h b/include/linux/ata.h index 3a50739e25a..18e401ff7ea 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -299,6 +299,8 @@ struct ata_taskfile { #define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) #define ata_id_has_dword_io(id) ((id)[50] & (1 << 0)) +#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10)) +#define ata_id_has_iordy(id) ((id)[49] & (1 << 9)) #define ata_id_u32(id,n) \ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) #define ata_id_u64(id,n) \ -- cgit v1.2.3 From 66efc5a7e3061c3597ac43a8bb1026488d57e66b Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 6 Feb 2007 22:19:10 -0500 Subject: libata: kill ATA_ENABLE_PATA The ATA_ENABLE_PATA define was never meant to be permanent, and in recent kernels, it's already been unconditionally enabled. Remove. Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index bdfe6ea8edf..596e0c18887 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -54,8 +54,6 @@ #undef ATA_VERBOSE_DEBUG /* yet more debugging output */ #undef ATA_IRQ_TRAP /* define to ack screaming irqs */ #undef ATA_NDEBUG /* define to disable quick runtime checks */ -#define ATA_ENABLE_PATA /* define to enable PATA support in some - * low-level drivers */ /* note: prints function name for you */ -- cgit v1.2.3