From f0c0a376d0fcd4c5579ecf5e95f88387cba85211 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 17 Aug 2008 15:24:38 -0500 Subject: [SCSI] Add helper code so transport classes/driver can control queueing (v3) SCSI-ml manages the queueing limits for the device and host, but does not do so at the target level. However something something similar can come in userful when a driver is transitioning a transport object to the the blocked state, becuase at that time we do not want to queue io and we do not want the queuecommand to be called again. The patch adds code similar to the exisiting SCSI_ML_*BUSY handlers. You can now return SCSI_MLQUEUE_TARGET_BUSY when we hit a transport level queueing issue like the hw cannot allocate some resource at the iscsi session/connection level, or the target has temporarily closed or shrunk the queueing window, or if we are transitioning to the blocked state. bnx2i, when they rework their firmware according to netdev developers requests, will also need to be able to limit queueing at this level. bnx2i will hook into libiscsi, but will allocate a scsi host per netdevice/hba, so unlike pure software iscsi/iser which is allocating a host per session, it cannot set the scsi_host->can_queue and return SCSI_MLQUEUE_HOST_BUSY to reflect queueing limits on the transport. The iscsi class/driver can also set a scsi_target->can_queue value which reflects the max commands the driver/class can support. For iscsi this reflects the number of commands we can support for each session due to session/connection hw limits, driver limits, and to also reflect the session/targets's queueing window. Changes: v1 - initial patch. v2 - Fix scsi_run_queue handling of multiple blocked targets. Previously we would break from the main loop if a device was added back on the starved list. We now run over the list and check if any target is blocked. v3 - Rediff for scsi-misc. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/scsi.h | 1 + include/scsi/scsi_device.h | 10 ++++++++++ 2 files changed, 11 insertions(+) (limited to 'include') diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 192f8716aa9..3a5662b2817 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -426,6 +426,7 @@ static inline int scsi_is_wlun(unsigned int lun) #define SCSI_MLQUEUE_HOST_BUSY 0x1055 #define SCSI_MLQUEUE_DEVICE_BUSY 0x1056 #define SCSI_MLQUEUE_EH_RETRY 0x1057 +#define SCSI_MLQUEUE_TARGET_BUSY 0x1058 /* * Use these to separate status msg and our bytes diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index b49e725be03..a37a8148a31 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -238,6 +238,16 @@ struct scsi_target { * for the device at a time. */ unsigned int pdt_1f_for_no_lun; /* PDT = 0x1f */ /* means no lun present */ + /* commands actually active on LLD. protected by host lock. */ + unsigned int target_busy; + /* + * LLDs should set this in the slave_alloc host template callout. + * If set to zero then there is not limit. + */ + unsigned int can_queue; + unsigned int target_blocked; + unsigned int max_target_blocked; +#define SCSI_DEFAULT_TARGET_BLOCKED 3 char scsi_level; struct execute_work ew; -- cgit v1.2.3 From fff9d40ce0eb4b46f3e186823ceab6bc02c3e5d3 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:23 -0500 Subject: [SCSI] fc class: unblock target after calling terminate callback (take 2) When we block a rport and the driver implements the terminate callback we will fail IO that was running quickly. However IO that was in the scsi_device/block queue sits there until the dev_loss_tmo fires, and this can make it look like IO is lost because new IO will get executed but that IO stuck in the blocked queue sits there for some time longer. With this patch when the fast io fail tmo fires, we will fail the blocked IO and any new IO. This patch also allows all drivers to partially support the fast io fail tmo. If the terminate io callback is not implemented, we will still fail blocked IO and any new IO, so multipath can handle that. This patch also allows the fc and iscsi classes to implement the same behavior. The timers are just unfornately named differently. This patch also fixes the problem where drivers were unblocking the target in their terminate callback, which was needed for rport removal, but for fast io fail timeout it would cause IO to bounce arround the scsi/block layer and the LLD queuecommand. And it for drivers that could have IO stuck but did not have a terminate callback the unblock calls in the class will fix them. v2. - fix up bit setting style to meet JamesS's pref. - Broke out new host byte error changes to make it easier to read. - added JamesS's ack from list. v1 - initial patch Signed-off-by: Mike Christie Acked-by: James Smart Signed-off-by: James Bottomley --- include/scsi/scsi_transport_fc.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 21018a4df45..fb8d0137066 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -357,6 +357,7 @@ struct fc_rport { /* aka fc_starget_attrs */ /* bit field values for struct fc_rport "flags" field: */ #define FC_RPORT_DEVLOSS_PENDING 0x01 #define FC_RPORT_SCAN_PENDING 0x02 +#define FC_RPORT_FAST_FAIL_TIMEDOUT 0x03 #define dev_to_rport(d) \ container_of(d, struct fc_rport, dev) @@ -683,7 +684,10 @@ fc_remote_port_chkready(struct fc_rport *rport) result = DID_NO_CONNECT << 16; break; case FC_PORTSTATE_BLOCKED: - result = DID_IMM_RETRY << 16; + if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT) + result = DID_NO_CONNECT << 16; + else + result = DID_IMM_RETRY << 16; break; default: result = DID_NO_CONNECT << 16; -- cgit v1.2.3 From a4dfaa6f2e55b736adf2719133996f7e7dc309bc Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:25 -0500 Subject: [SCSI] scsi: add transport host byte errors (v3) Currently, if there is a transport problem the iscsi drivers will return outstanding commands (commands being exeucted by the driver/fw/hw) with DID_BUS_BUSY and block the session so no new commands can be queued. Commands that are caught between the failure handling and blocking are failed with DID_IMM_RETRY or one of the scsi ml queuecommand return values. When the recovery_timeout fires, the iscsi drivers then fail IO with DID_NO_CONNECT. For fcp, some drivers will fail some outstanding IO (disk but possibly not tape) with DID_BUS_BUSY or DID_ERROR or some other value that causes a retry and hits the scsi_error.c failfast check, block the rport, and commands caught in the race are failed with DID_IMM_RETRY. Other drivers, may hold onto all IO and wait for the terminate_rport_io or dev_loss_tmo_callbk to be called. The following patches attempt to unify what upper layers will see drivers like multipath can make a good guess. This relies on drivers being hooked into their transport class. This first patch just defines two new host byte errors so drivers can return the same value for when a rport/session is blocked and for when the fast_io_fail_tmo fires. The idea is that if the LLD/class detects a problem and is going to block a rport/session, then if the LLD wants or must return the command to scsi-ml, then it can return it with DID_TRANSPORT_DISRUPTED. This will requeue the IO into the same scsi queue it came from, until the fast io fail timer fires and the class decides what to do. When using multipath and the fast_io_fail_tmo fires then the class can fail commands with DID_TRANSPORT_FAILFAST or drivers can use DID_TRANSPORT_FAILFAST in their terminate_rport_io callbacks or the equivlent in iscsi if we ever implement more advanced recovery methods. A LLD, like lpfc, could continue to return DID_ERROR and then it will hit the normal failfast path, so drivers do not have fully be ported to work better. The point of the patches is that upper layers will not see a failure that could be recovered from while the rport/session is blocked until fast_io_fail_tmo/recovery_timeout fires. V3 Remove some comments. V2 Fixed patch/diff errors and renamed DID_TRANSPORT_BLOCKED to DID_TRANSPORT_DISRUPTED. V1 initial patch. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/scsi.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 3a5662b2817..a109165714d 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -381,6 +381,11 @@ static inline int scsi_is_wlun(unsigned int lun) #define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */ #define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also * without decrementing the retry count */ +#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution + * and the driver blocked the port to + * recover the link. Transport class will + * retry or fail IO */ +#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */ #define DRIVER_OK 0x00 /* Driver status */ /* -- cgit v1.2.3 From f46e307da925a7b71a0018c0510cdc6e588b87fc Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:27 -0500 Subject: [SCSI] fc class: Add support for new transport errors If the target is blocked and fast io fail tmo has not fired then we requeue with DID_TRANSPORT_DISRUPTED. Once that tmo fires we fail with DID_TRANSPORT_FAILFAST. v2 - seperate from "fc class: unblock target after calling terminate callback" to make it easier to review. - Add JamesS's ack from list. v2 - initial patch Signed-off-by: Mike Christie Acked-by: James Smart Signed-off-by: James Bottomley --- include/scsi/scsi_transport_fc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index fb8d0137066..49d8913c4f8 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -679,15 +679,15 @@ fc_remote_port_chkready(struct fc_rport *rport) if (rport->roles & FC_PORT_ROLE_FCP_TARGET) result = 0; else if (rport->flags & FC_RPORT_DEVLOSS_PENDING) - result = DID_IMM_RETRY << 16; + result = DID_TRANSPORT_DISRUPTED << 16; else result = DID_NO_CONNECT << 16; break; case FC_PORTSTATE_BLOCKED: if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT) - result = DID_NO_CONNECT << 16; + result = DID_TRANSPORT_FAILFAST << 16; else - result = DID_IMM_RETRY << 16; + result = DID_TRANSPORT_DISRUPTED << 16; break; default: result = DID_NO_CONNECT << 16; -- cgit v1.2.3 From 6000a368cd8e6da1caf101411bdb494cd6fb8b09 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 19 Aug 2008 18:45:30 -0500 Subject: [SCSI] block: separate failfast into multiple bits. Multipath is best at handling transport errors. If it gets a device error then there is not much the multipath layer can do. It will just access the same device but from a different path. This patch breaks up failfast into device, transport and driver errors. The multipath layers (md and dm mutlipath) only ask the lower levels to fast fail transport errors. The user of failfast, read ahead, will ask to fast fail on all errors. Note that blk_noretry_request will return true if any failfast bit is set. This allows drivers that do not support the multipath failfast bits to continue to fail on any failfast error like before. Drivers like scsi that are able to fail fast specific errors can check for the specific fail fast type. In the next patch I will convert scsi. Signed-off-by: Mike Christie Cc: Jens Axboe Signed-off-by: James Bottomley --- include/linux/bio.h | 26 +++++++++++++++++--------- include/linux/blkdev.h | 15 ++++++++++++--- 2 files changed, 29 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/linux/bio.h b/include/linux/bio.h index ff5b4cf9e2d..1beda208cbf 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -129,25 +129,30 @@ struct bio { * bit 2 -- barrier * Insert a serialization point in the IO queue, forcing previously * submitted IO to be completed before this oen is issued. - * bit 3 -- fail fast, don't want low level driver retries - * bit 4 -- synchronous I/O hint: the block layer will unplug immediately + * bit 3 -- synchronous I/O hint: the block layer will unplug immediately * Note that this does NOT indicate that the IO itself is sync, just * that the block layer will not postpone issue of this IO by plugging. - * bit 5 -- metadata request + * bit 4 -- metadata request * Used for tracing to differentiate metadata and data IO. May also * get some preferential treatment in the IO scheduler - * bit 6 -- discard sectors + * bit 5 -- discard sectors * Informs the lower level device that this range of sectors is no longer * used by the file system and may thus be freed by the device. Used * for flash based storage. + * bit 6 -- fail fast device errors + * bit 7 -- fail fast transport errors + * bit 8 -- fail fast driver errors + * Don't want driver retries for any fast fail whatever the reason. */ #define BIO_RW 0 /* Must match RW in req flags (blkdev.h) */ #define BIO_RW_AHEAD 1 /* Must match FAILFAST in req flags */ #define BIO_RW_BARRIER 2 -#define BIO_RW_FAILFAST 3 -#define BIO_RW_SYNC 4 -#define BIO_RW_META 5 -#define BIO_RW_DISCARD 6 +#define BIO_RW_SYNC 3 +#define BIO_RW_META 4 +#define BIO_RW_DISCARD 5 +#define BIO_RW_FAILFAST_DEV 6 +#define BIO_RW_FAILFAST_TRANSPORT 7 +#define BIO_RW_FAILFAST_DRIVER 8 /* * upper 16 bits of bi_rw define the io priority of this bio @@ -174,7 +179,10 @@ struct bio { #define bio_sectors(bio) ((bio)->bi_size >> 9) #define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_RW_BARRIER)) #define bio_sync(bio) ((bio)->bi_rw & (1 << BIO_RW_SYNC)) -#define bio_failfast(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST)) +#define bio_failfast_dev(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DEV)) +#define bio_failfast_transport(bio) \ + ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_TRANSPORT)) +#define bio_failfast_driver(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DRIVER)) #define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD)) #define bio_rw_meta(bio) ((bio)->bi_rw & (1 << BIO_RW_META)) #define bio_discard(bio) ((bio)->bi_rw & (1 << BIO_RW_DISCARD)) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a92d9e4ea96..f3491d22526 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -87,7 +87,9 @@ enum { */ enum rq_flag_bits { __REQ_RW, /* not set, read. set, write */ - __REQ_FAILFAST, /* no low level driver retries */ + __REQ_FAILFAST_DEV, /* no driver retries of device errors */ + __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */ + __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */ __REQ_DISCARD, /* request to discard sectors */ __REQ_SORTED, /* elevator knows about this request */ __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */ @@ -111,8 +113,10 @@ enum rq_flag_bits { }; #define REQ_RW (1 << __REQ_RW) +#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV) +#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT) +#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER) #define REQ_DISCARD (1 << __REQ_DISCARD) -#define REQ_FAILFAST (1 << __REQ_FAILFAST) #define REQ_SORTED (1 << __REQ_SORTED) #define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER) #define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER) @@ -560,7 +564,12 @@ enum { #define blk_special_request(rq) ((rq)->cmd_type == REQ_TYPE_SPECIAL) #define blk_sense_request(rq) ((rq)->cmd_type == REQ_TYPE_SENSE) -#define blk_noretry_request(rq) ((rq)->cmd_flags & REQ_FAILFAST) +#define blk_failfast_dev(rq) ((rq)->cmd_flags & REQ_FAILFAST_DEV) +#define blk_failfast_transport(rq) ((rq)->cmd_flags & REQ_FAILFAST_TRANSPORT) +#define blk_failfast_driver(rq) ((rq)->cmd_flags & REQ_FAILFAST_DRIVER) +#define blk_noretry_request(rq) (blk_failfast_dev(rq) || \ + blk_failfast_transport(rq) || \ + blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) -- cgit v1.2.3 From e5bd7b54e93ef7151469a12b8c28d863b9f8a088 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:10 -0500 Subject: [SCSI] libiscsi: Support drivers initiating session removal If the driver knows when hardware is removed like with cxgb3i, bnx2i, qla4xxx and iser then we will want to remove the sessions/devices that are bound to that device before removing the host. cxgb3i and in the future bnx2i will remove the host and that will remove all the sessions on the hba. iser can call iscsi_kill_session when it gets an event that indicates that a hca is removed. And when qla4xxx is hooked in to the lib (it is only hooked into the class right now) it can call iscsi remove host like the partial offload card drivers. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/iscsi_if.h | 1 + include/scsi/libiscsi.h | 13 +++++++++++++ include/scsi/scsi_transport_iscsi.h | 3 ++- 3 files changed, 16 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 16be12f1cbe..f274d248a91 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -213,6 +213,7 @@ enum iscsi_err { ISCSI_ERR_DATA_DGST = ISCSI_ERR_BASE + 15, ISCSI_ERR_PARAM_NOT_FOUND = ISCSI_ERR_BASE + 16, ISCSI_ERR_NO_SCSI_CMD = ISCSI_ERR_BASE + 17, + ISCSI_ERR_INVALID_HOST = ISCSI_ERR_BASE + 18, }; /* diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 5e75bb7f311..7d8cd159f59 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -287,6 +287,11 @@ struct iscsi_session { struct iscsi_pool cmdpool; /* PDU's pool */ }; +enum { + ISCSI_HOST_SETUP, + ISCSI_HOST_REMOVED, +}; + struct iscsi_host { char *initiatorname; /* hw address or netdev iscsi connection is bound to */ @@ -295,6 +300,12 @@ struct iscsi_host { /* local address */ int local_port; char local_address[ISCSI_ADDRESS_BUF_LEN]; + + wait_queue_head_t session_removal_wq; + /* protects sessions and state */ + spinlock_t lock; + int num_sessions; + int state; }; /* @@ -351,6 +362,8 @@ extern void iscsi_conn_stop(struct iscsi_cls_conn *, int); extern int iscsi_conn_bind(struct iscsi_cls_session *, struct iscsi_cls_conn *, int); extern void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err); +extern void iscsi_session_failure(struct iscsi_cls_session *cls_session, + enum iscsi_err err); extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, char *buf); extern void iscsi_suspend_tx(struct iscsi_conn *conn); diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 8b6c91df4c7..8749d4d8e24 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -135,7 +135,8 @@ extern int iscsi_unregister_transport(struct iscsi_transport *tt); /* * control plane upcalls */ -extern void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error); +extern void iscsi_conn_error_event(struct iscsi_cls_conn *conn, + enum iscsi_err error); extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr, char *data, uint32_t data_size); -- cgit v1.2.3 From 21536062d98938dfcfbae593a26c154e359749dc Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:11 -0500 Subject: [SCSI] iscsi class: fix endpoint id handling Some endpoint code was using unsigned int and some was using uint64_t. This converts it all to uint64_t. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/scsi_transport_iscsi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 8749d4d8e24..c667cc39654 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -208,7 +208,7 @@ extern void iscsi_host_for_each_session(struct Scsi_Host *shost, struct iscsi_endpoint { void *dd_data; /* LLD private data */ struct device dev; - unsigned int id; + uint64_t id; }; /* -- cgit v1.2.3 From 8e12452549ba2dfa17db97bc495172fac221a7ab Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:12 -0500 Subject: [SCSI] libiscsi: rename host reset to target reset I had this in my patchset to add target reset support, but it got dropped due to patching conflicts. This initial patch just renames the function and users. We are actually just dropping the session, and so this does not have anything to do with the host exactly. It does for software iscsi because we allocate a host per session, but for cxgb3i this makes no sense. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/libiscsi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 7d8cd159f59..61e53f14f7e 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -313,7 +313,7 @@ struct iscsi_host { */ extern int iscsi_change_queue_depth(struct scsi_device *sdev, int depth); extern int iscsi_eh_abort(struct scsi_cmnd *sc); -extern int iscsi_eh_host_reset(struct scsi_cmnd *sc); +extern int iscsi_eh_target_reset(struct scsi_cmnd *sc); extern int iscsi_eh_device_reset(struct scsi_cmnd *sc); extern int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)); -- cgit v1.2.3 From 6f481e3cefeb33094e87af176587e6a3027f104e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 24 Sep 2008 11:46:13 -0500 Subject: [SCSI] iscsi_tcp: return a descriptive error value during connection errors The segment->done functions return a iscsi error value which gives a lot more info than conn failed, so this patch has us return that value. I also add a new one for xmit failures. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- include/scsi/iscsi_if.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index f274d248a91..0c9514de5df 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -214,6 +214,7 @@ enum iscsi_err { ISCSI_ERR_PARAM_NOT_FOUND = ISCSI_ERR_BASE + 16, ISCSI_ERR_NO_SCSI_CMD = ISCSI_ERR_BASE + 17, ISCSI_ERR_INVALID_HOST = ISCSI_ERR_BASE + 18, + ISCSI_ERR_XMIT_FAILED = ISCSI_ERR_BASE + 19, }; /* -- cgit v1.2.3