From fba68bd2dab1ac99af3c5a963ec9581cfa9f1725 Mon Sep 17 00:00:00 2001 From: Philip Langdale Date: Thu, 4 Jan 2007 06:57:32 -0800 Subject: mmc: Add support for SDHC cards Thanks to the generous donation of an SDHC card by John Gilmore, and the surprisingly enlightened decision by the SD Card Association to publish useful specs, I've been able to bash out support for SDHC. The changes are not too profound: i) Add a card flag indicating the card uses block level addressing and check it in the block driver. As we never took advantage of byte-level addressing, this simply involves skipping the block -> byte translation when sending commands. ii) The layout of the CSD is changed - a set of fields are discarded to make space for a larger C_SIZE. We did not reference any of the discarded fields except those related to the C_SIZE. iii) Read and write timeouts are fixed values and not calculated from CSD values. iv) Before invoking SEND_APP_OP_COND, we must invoke the new SEND_IF_COND to inform the card we support SDHC. Signed-off-by: Philipl Langdale Signed-off-by: Pierre Ossman --- include/linux/mmc/card.h | 3 +++ include/linux/mmc/mmc.h | 1 + include/linux/mmc/protocol.h | 13 ++++++++++++- 3 files changed, 16 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index d0e6a549761..e45712acfac 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -71,6 +71,7 @@ struct mmc_card { #define MMC_STATE_SDCARD (1<<3) /* is an SD card */ #define MMC_STATE_READONLY (1<<4) /* card is read-only */ #define MMC_STATE_HIGHSPEED (1<<5) /* card is in high speed mode */ +#define MMC_STATE_BLOCKADDR (1<<6) /* card uses block-addressing */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ u32 raw_scr[2]; /* raw card SCR */ @@ -87,6 +88,7 @@ struct mmc_card { #define mmc_card_sd(c) ((c)->state & MMC_STATE_SDCARD) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) +#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_dead(c) ((c)->state |= MMC_STATE_DEAD) @@ -94,6 +96,7 @@ struct mmc_card { #define mmc_card_set_sd(c) ((c)->state |= MMC_STATE_SDCARD) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) +#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) ((c)->dev.bus_id) diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index bcf24909d67..cdc54be804f 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -43,6 +43,7 @@ struct mmc_command { #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) #define MMC_RSP_R3 (MMC_RSP_PRESENT) #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE)) diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h index 2dce60c43f4..c90b6768329 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/protocol.h @@ -79,9 +79,12 @@ #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ /* SD commands type argument response */ - /* class 8 */ + /* class 0 */ /* This is basically the same command as for MMC with some quirks. */ #define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ +#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */ + + /* class 10 */ #define SD_SWITCH 6 /* adtc [31:0] See below R1 */ /* Application commands */ @@ -114,6 +117,14 @@ * [3:0] Function group 1 */ +/* + * SD_SEND_IF_COND argument format: + * + * [31:12] Reserved (0) + * [11:8] Host Voltage Supply Flags + * [7:0] Check Pattern (0xAA) + */ + /* MMC status in R1 Type -- cgit v1.2.3