From f011e2e2df3393c16b0fdc48e855e909b7e021ee Mon Sep 17 00:00:00 2001 From: Mark Gross Date: Mon, 4 Feb 2008 22:30:09 -0800 Subject: latency.c: use QoS infrastructure Replace latency.c use with pm_qos_params use. Signed-off-by: mark gross Cc: "John W. Linville" Cc: Len Brown Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/Makefile | 2 +- kernel/latency.c | 280 ------------------------------------------------------- 2 files changed, 1 insertion(+), 281 deletions(-) delete mode 100644 kernel/latency.c (limited to 'kernel') diff --git a/kernel/Makefile b/kernel/Makefile index 8331243a4e5..135a1b94344 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -8,7 +8,7 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o profile.o \ signal.o sys.o kmod.o workqueue.o pid.o \ rcupdate.o extable.o params.o posix-timers.o \ kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \ - hrtimer.o rwsem.o latency.o nsproxy.o srcu.o \ + hrtimer.o rwsem.o nsproxy.o srcu.o \ utsname.o notifier.o ksysfs.o pm_qos_params.o obj-$(CONFIG_SYSCTL) += sysctl_check.o diff --git a/kernel/latency.c b/kernel/latency.c deleted file mode 100644 index e63fcacb61a..00000000000 --- a/kernel/latency.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * latency.c: Explicit system-wide latency-expectation infrastructure - * - * The purpose of this infrastructure is to allow device drivers to set - * latency constraint they have and to collect and summarize these - * expectations globally. The cummulated result can then be used by - * power management and similar users to make decisions that have - * tradoffs with a latency component. - * - * An example user of this are the x86 C-states; each higher C state saves - * more power, but has a higher exit latency. For the idle loop power - * code to make a good decision which C-state to use, information about - * acceptable latencies is required. - * - * An example announcer of latency is an audio driver that knowns it - * will get an interrupt when the hardware has 200 usec of samples - * left in the DMA buffer; in that case the driver can set a latency - * constraint of, say, 150 usec. - * - * Multiple drivers can each announce their maximum accepted latency, - * to keep these appart, a string based identifier is used. - * - * - * (C) Copyright 2006 Intel Corporation - * Author: Arjan van de Ven - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -struct latency_info { - struct list_head list; - int usecs; - char *identifier; -}; - -/* - * locking rule: all modifications to current_max_latency and - * latency_list need to be done while holding the latency_lock. - * latency_lock needs to be taken _irqsave. - */ -static atomic_t current_max_latency; -static DEFINE_SPINLOCK(latency_lock); - -static LIST_HEAD(latency_list); -static BLOCKING_NOTIFIER_HEAD(latency_notifier); - -/* - * This function returns the maximum latency allowed, which - * happens to be the minimum of all maximum latencies on the - * list. - */ -static int __find_max_latency(void) -{ - int min = INFINITE_LATENCY; - struct latency_info *info; - - list_for_each_entry(info, &latency_list, list) { - if (info->usecs < min) - min = info->usecs; - } - return min; -} - -/** - * set_acceptable_latency - sets the maximum latency acceptable - * @identifier: string that identifies this driver - * @usecs: maximum acceptable latency for this driver - * - * This function informs the kernel that this device(driver) - * can accept at most usecs latency. This setting is used for - * power management and similar tradeoffs. - * - * This function sleeps and can only be called from process - * context. - * Calling this function with an existing identifier is valid - * and will cause the existing latency setting to be changed. - */ -void set_acceptable_latency(char *identifier, int usecs) -{ - struct latency_info *info, *iter; - unsigned long flags; - int found_old = 0; - - info = kzalloc(sizeof(struct latency_info), GFP_KERNEL); - if (!info) - return; - info->usecs = usecs; - info->identifier = kstrdup(identifier, GFP_KERNEL); - if (!info->identifier) - goto free_info; - - spin_lock_irqsave(&latency_lock, flags); - list_for_each_entry(iter, &latency_list, list) { - if (strcmp(iter->identifier, identifier)==0) { - found_old = 1; - iter->usecs = usecs; - break; - } - } - if (!found_old) - list_add(&info->list, &latency_list); - - if (usecs < atomic_read(¤t_max_latency)) - atomic_set(¤t_max_latency, usecs); - - spin_unlock_irqrestore(&latency_lock, flags); - - blocking_notifier_call_chain(&latency_notifier, - atomic_read(¤t_max_latency), NULL); - - /* - * if we inserted the new one, we're done; otherwise there was - * an existing one so we need to free the redundant data - */ - if (!found_old) - return; - - kfree(info->identifier); -free_info: - kfree(info); -} -EXPORT_SYMBOL_GPL(set_acceptable_latency); - -/** - * modify_acceptable_latency - changes the maximum latency acceptable - * @identifier: string that identifies this driver - * @usecs: maximum acceptable latency for this driver - * - * This function informs the kernel that this device(driver) - * can accept at most usecs latency. This setting is used for - * power management and similar tradeoffs. - * - * This function does not sleep and can be called in any context. - * Trying to use a non-existing identifier silently gets ignored. - * - * Due to the atomic nature of this function, the modified latency - * value will only be used for future decisions; past decisions - * can still lead to longer latencies in the near future. - */ -void modify_acceptable_latency(char *identifier, int usecs) -{ - struct latency_info *iter; - unsigned long flags; - - spin_lock_irqsave(&latency_lock, flags); - list_for_each_entry(iter, &latency_list, list) { - if (strcmp(iter->identifier, identifier) == 0) { - iter->usecs = usecs; - break; - } - } - if (usecs < atomic_read(¤t_max_latency)) - atomic_set(¤t_max_latency, usecs); - spin_unlock_irqrestore(&latency_lock, flags); -} -EXPORT_SYMBOL_GPL(modify_acceptable_latency); - -/** - * remove_acceptable_latency - removes the maximum latency acceptable - * @identifier: string that identifies this driver - * - * This function removes a previously set maximum latency setting - * for the driver and frees up any resources associated with the - * bookkeeping needed for this. - * - * This function does not sleep and can be called in any context. - * Trying to use a non-existing identifier silently gets ignored. - */ -void remove_acceptable_latency(char *identifier) -{ - unsigned long flags; - int newmax = 0; - struct latency_info *iter, *temp; - - spin_lock_irqsave(&latency_lock, flags); - - list_for_each_entry_safe(iter, temp, &latency_list, list) { - if (strcmp(iter->identifier, identifier) == 0) { - list_del(&iter->list); - newmax = iter->usecs; - kfree(iter->identifier); - kfree(iter); - break; - } - } - - /* If we just deleted the system wide value, we need to - * recalculate with a full search - */ - if (newmax == atomic_read(¤t_max_latency)) { - newmax = __find_max_latency(); - atomic_set(¤t_max_latency, newmax); - } - spin_unlock_irqrestore(&latency_lock, flags); -} -EXPORT_SYMBOL_GPL(remove_acceptable_latency); - -/** - * system_latency_constraint - queries the system wide latency maximum - * - * This function returns the system wide maximum latency in - * microseconds. - * - * This function does not sleep and can be called in any context. - */ -int system_latency_constraint(void) -{ - return atomic_read(¤t_max_latency); -} -EXPORT_SYMBOL_GPL(system_latency_constraint); - -/** - * synchronize_acceptable_latency - recalculates all latency decisions - * - * This function will cause a callback to various kernel pieces that - * will make those pieces rethink their latency decisions. This implies - * that if there are overlong latencies in hardware state already, those - * latencies get taken right now. When this call completes no overlong - * latency decisions should be active anymore. - * - * Typical usecase of this is after a modify_acceptable_latency() call, - * which in itself is non-blocking and non-synchronizing. - * - * This function blocks and should not be called with locks held. - */ - -void synchronize_acceptable_latency(void) -{ - blocking_notifier_call_chain(&latency_notifier, - atomic_read(¤t_max_latency), NULL); -} -EXPORT_SYMBOL_GPL(synchronize_acceptable_latency); - -/* - * Latency notifier: this notifier gets called when a non-atomic new - * latency value gets set. The expectation nof the caller of the - * non-atomic set is that when the call returns, future latencies - * are within bounds, so the functions on the notifier list are - * expected to take the overlong latencies immediately, inside the - * callback, and not make a overlong latency decision anymore. - * - * The callback gets called when the new latency value is made - * active so system_latency_constraint() returns the new latency. - */ -int register_latency_notifier(struct notifier_block * nb) -{ - return blocking_notifier_chain_register(&latency_notifier, nb); -} -EXPORT_SYMBOL_GPL(register_latency_notifier); - -int unregister_latency_notifier(struct notifier_block * nb) -{ - return blocking_notifier_chain_unregister(&latency_notifier, nb); -} -EXPORT_SYMBOL_GPL(unregister_latency_notifier); - -static __init int latency_init(void) -{ - atomic_set(¤t_max_latency, INFINITE_LATENCY); - /* - * we don't want by default to have longer latencies than 2 ticks, - * since that would cause lost ticks - */ - set_acceptable_latency("kernel", 2*1000000/HZ); - return 0; -} - -module_init(latency_init); -- cgit v1.2.3