From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- net/ax25/Kconfig | 110 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 net/ax25/Kconfig (limited to 'net/ax25/Kconfig') diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig new file mode 100644 index 00000000000..a8993a04172 --- /dev/null +++ b/net/ax25/Kconfig @@ -0,0 +1,110 @@ +# +# Amateur Radio protocols and AX.25 device configuration +# +# 19971130 Now in an own category to make correct compilation of the +# AX.25 stuff easier... +# Joerg Reuter DL1BKE +# 19980129 Moved to net/ax25/Config.in, sourcing device drivers. + +menuconfig HAMRADIO + depends on NET + bool "Amateur Radio support" + help + If you want to connect your Linux box to an amateur radio, answer Y + here. You want to read and + the AX25-HOWTO, available from . + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about amateur radio. + +comment "Packet Radio protocols" + depends on HAMRADIO && NET + +config AX25 + tristate "Amateur Radio AX.25 Level 2 protocol" + depends on HAMRADIO && NET + ---help--- + This is the protocol used for computer communication over amateur + radio. It is either used by itself for point-to-point links, or to + carry other protocols such as tcp/ip. To use it, you need a device + that connects your Linux box to your amateur radio. You can either + use a low speed TNC (a Terminal Node Controller acts as a kind of + modem connecting your computer's serial port to your radio's + microphone input and speaker output) supporting the KISS protocol or + one of the various SCC cards that are supported by the generic Z8530 + or the DMA SCC driver. Another option are the Baycom modem serial + and parallel port hacks or the sound card modem (supported by their + own drivers). If you say Y here, you also have to say Y to one of + those drivers. + + Information about where to get supporting software for Linux amateur + radio as well as information about how to configure an AX.25 port is + contained in the AX25-HOWTO, available from + . You might also want to + check out the file in the + kernel source. More information about digital amateur radio in + general is on the WWW at + . + + To compile this driver as a module, choose M here: the + module will be called ax25. + +config AX25_DAMA_SLAVE + bool "AX.25 DAMA Slave support" + depends on AX25 + help + DAMA is a mechanism to prevent collisions when doing AX.25 + networking. A DAMA server (called "master") accepts incoming traffic + from clients (called "slaves") and redistributes it to other slaves. + If you say Y here, your Linux box will act as a DAMA slave; this is + transparent in that you don't have to do any special DAMA + configuration. (Linux cannot yet act as a DAMA server.) If unsure, + say N. + +# bool ' AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER +config NETROM + tristate "Amateur Radio NET/ROM protocol" + depends on AX25 + ---help--- + NET/ROM is a network layer protocol on top of AX.25 useful for + routing. + + A comprehensive listing of all the software for Linux amateur radio + users as well as information about how to configure an AX.25 port is + contained in the AX25-HOWTO, available from + . You also might want to + check out the file . More + information about digital amateur radio in general is on the WWW at + . + + To compile this driver as a module, choose M here: the + module will be called netrom. + +config ROSE + tristate "Amateur Radio X.25 PLP (Rose)" + depends on AX25 + ---help--- + The Packet Layer Protocol (PLP) is a way to route packets over X.25 + connections in general and amateur radio AX.25 connections in + particular, essentially an alternative to NET/ROM. + + A comprehensive listing of all the software for Linux amateur radio + users as well as information about how to configure an AX.25 port is + contained in the AX25-HOWTO, available from + . You also might want to + check out the file . More + information about digital amateur radio in general is on the WWW at + . + + To compile this driver as a module, choose M here: the + module will be called rose. + + +menu "AX.25 network device drivers" + depends on HAMRADIO && NET && AX25!=n + +source "drivers/net/hamradio/Kconfig" + +endmenu + -- cgit v1.2.3