From 0d143fe1e2efc084fa730d2dfa22d0d1ca2ee5f1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 11 Sep 2008 00:01:59 +0200 Subject: mac80211: move regular interface handling Move the code to handle regular interfaces out of main.c and into iface.c, keep only the master interface stuff in main.c. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/iface.c | 534 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 534 insertions(+) (limited to 'net/mac80211/iface.c') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 004fb23241d..f528962b13e 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1,4 +1,6 @@ /* + * Interface handling (except master interface) + * * Copyright 2002-2005, Instant802 Networks, Inc. * Copyright 2005-2006, Devicescape Software, Inc. * Copyright (c) 2006 Jiri Benc @@ -17,7 +19,539 @@ #include "sta_info.h" #include "debugfs_netdev.h" #include "mesh.h" +#include "led.h" + +static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) +{ + int meshhdrlen; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0; + + /* FIX: what would be proper limits for MTU? + * This interface uses 802.3 frames. */ + if (new_mtu < 256 || + new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { + return -EINVAL; + } + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu); +#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ + dev->mtu = new_mtu; + return 0; +} + +static inline int identical_mac_addr_allowed(int type1, int type2) +{ + return type1 == NL80211_IFTYPE_MONITOR || + type2 == NL80211_IFTYPE_MONITOR || + (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) || + (type1 == NL80211_IFTYPE_WDS && + (type2 == NL80211_IFTYPE_WDS || + type2 == NL80211_IFTYPE_AP)) || + (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) || + (type1 == NL80211_IFTYPE_AP_VLAN && + (type2 == NL80211_IFTYPE_AP || + type2 == NL80211_IFTYPE_AP_VLAN)); +} + +static int ieee80211_open(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata, *nsdata; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct sta_info *sta; + struct ieee80211_if_init_conf conf; + u32 changed = 0; + int res; + bool need_hw_reconfig = 0; + u8 null_addr[ETH_ALEN] = {0}; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + /* fail early if user set an invalid address */ + if (compare_ether_addr(dev->dev_addr, null_addr) && + !is_valid_ether_addr(dev->dev_addr)) + return -EADDRNOTAVAIL; + + /* we hold the RTNL here so can safely walk the list */ + list_for_each_entry(nsdata, &local->interfaces, list) { + struct net_device *ndev = nsdata->dev; + + if (ndev != dev && netif_running(ndev)) { + /* + * Allow only a single IBSS interface to be up at any + * time. This is restricted because beacon distribution + * cannot work properly if both are in the same IBSS. + * + * To remove this restriction we'd have to disallow them + * from setting the same SSID on different IBSS interfaces + * belonging to the same hardware. Then, however, we're + * faced with having to adopt two different TSF timers... + */ + if (sdata->vif.type == NL80211_IFTYPE_ADHOC && + nsdata->vif.type == NL80211_IFTYPE_ADHOC) + return -EBUSY; + + /* + * The remaining checks are only performed for interfaces + * with the same MAC address. + */ + if (compare_ether_addr(dev->dev_addr, ndev->dev_addr)) + continue; + + /* + * check whether it may have the same address + */ + if (!identical_mac_addr_allowed(sdata->vif.type, + nsdata->vif.type)) + return -ENOTUNIQ; + + /* + * can only add VLANs to enabled APs + */ + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && + nsdata->vif.type == NL80211_IFTYPE_AP) + sdata->bss = &nsdata->u.ap; + } + } + + switch (sdata->vif.type) { + case NL80211_IFTYPE_WDS: + if (!is_valid_ether_addr(sdata->u.wds.remote_addr)) + return -ENOLINK; + break; + case NL80211_IFTYPE_AP_VLAN: + if (!sdata->bss) + return -ENOLINK; + list_add(&sdata->u.vlan.list, &sdata->bss->vlans); + break; + case NL80211_IFTYPE_AP: + sdata->bss = &sdata->u.ap; + break; + case NL80211_IFTYPE_MESH_POINT: + if (!ieee80211_vif_is_mesh(&sdata->vif)) + break; + /* mesh ifaces must set allmulti to forward mcast traffic */ + atomic_inc(&local->iff_allmultis); + break; + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_ADHOC: + /* no special treatment */ + break; + case NL80211_IFTYPE_UNSPECIFIED: + case __NL80211_IFTYPE_AFTER_LAST: + /* cannot happen */ + WARN_ON(1); + break; + } + + if (local->open_count == 0) { + res = 0; + if (local->ops->start) + res = local->ops->start(local_to_hw(local)); + if (res) + goto err_del_bss; + need_hw_reconfig = 1; + ieee80211_led_radio(local, local->hw.conf.radio_enabled); + } + /* + * Check all interfaces and copy the hopefully now-present + * MAC address to those that have the special null one. + */ + list_for_each_entry(nsdata, &local->interfaces, list) { + struct net_device *ndev = nsdata->dev; + + /* + * No need to check netif_running since we do not allow + * it to start up with this invalid address. + */ + if (compare_ether_addr(null_addr, ndev->dev_addr) == 0) + memcpy(ndev->dev_addr, + local->hw.wiphy->perm_addr, + ETH_ALEN); + } + + if (compare_ether_addr(null_addr, local->mdev->dev_addr) == 0) + memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, + ETH_ALEN); + + /* + * Validate the MAC address for this device. + */ + if (!is_valid_ether_addr(dev->dev_addr)) { + if (!local->open_count && local->ops->stop) + local->ops->stop(local_to_hw(local)); + return -EADDRNOTAVAIL; + } + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + /* no need to tell driver */ + break; + case NL80211_IFTYPE_MONITOR: + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs++; + break; + } + + /* must be before the call to ieee80211_configure_filter */ + local->monitors++; + if (local->monitors == 1) + local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; + + if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) + local->fif_fcsfail++; + if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) + local->fif_plcpfail++; + if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) + local->fif_control++; + if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) + local->fif_other_bss++; + + netif_addr_lock_bh(local->mdev); + ieee80211_configure_filter(local); + netif_addr_unlock_bh(local->mdev); + break; + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET; + /* fall through */ + default: + conf.vif = &sdata->vif; + conf.type = sdata->vif.type; + conf.mac_addr = dev->dev_addr; + res = local->ops->add_interface(local_to_hw(local), &conf); + if (res) + goto err_stop; + + if (ieee80211_vif_is_mesh(&sdata->vif)) + ieee80211_start_mesh(sdata); + changed |= ieee80211_reset_erp_info(sdata); + ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_enable_keys(sdata); + + if (sdata->vif.type == NL80211_IFTYPE_STATION && + !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)) + netif_carrier_off(dev); + else + netif_carrier_on(dev); + } + + if (sdata->vif.type == NL80211_IFTYPE_WDS) { + /* Create STA entry for the WDS peer */ + sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr, + GFP_KERNEL); + if (!sta) { + res = -ENOMEM; + goto err_del_interface; + } + + /* no locking required since STA is not live yet */ + sta->flags |= WLAN_STA_AUTHORIZED; + + res = sta_info_insert(sta); + if (res) { + /* STA has been freed */ + goto err_del_interface; + } + } + + if (local->open_count == 0) { + res = dev_open(local->mdev); + WARN_ON(res); + if (res) + goto err_del_interface; + tasklet_enable(&local->tx_pending_tasklet); + tasklet_enable(&local->tasklet); + } + + /* + * set_multicast_list will be invoked by the networking core + * which will check whether any increments here were done in + * error and sync them down to the hardware as filter flags. + */ + if (sdata->flags & IEEE80211_SDATA_ALLMULTI) + atomic_inc(&local->iff_allmultis); + + if (sdata->flags & IEEE80211_SDATA_PROMISC) + atomic_inc(&local->iff_promiscs); + + local->open_count++; + if (need_hw_reconfig) { + ieee80211_hw_config(local); + /* + * set default queue parameters so drivers don't + * need to initialise the hardware if the hardware + * doesn't start up with sane defaults + */ + ieee80211_set_wmm_default(sdata); + } + + /* + * ieee80211_sta_work is disabled while network interface + * is down. Therefore, some configuration changes may not + * yet be effective. Trigger execution of ieee80211_sta_work + * to fix this. + */ + if (sdata->vif.type == NL80211_IFTYPE_STATION || + sdata->vif.type == NL80211_IFTYPE_ADHOC) { + struct ieee80211_if_sta *ifsta = &sdata->u.sta; + queue_work(local->hw.workqueue, &ifsta->work); + } + + netif_tx_start_all_queues(dev); + + return 0; + err_del_interface: + local->ops->remove_interface(local_to_hw(local), &conf); + err_stop: + if (!local->open_count && local->ops->stop) + local->ops->stop(local_to_hw(local)); + err_del_bss: + sdata->bss = NULL; + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + list_del(&sdata->u.vlan.list); + return res; +} + +static int ieee80211_stop(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_init_conf conf; + struct sta_info *sta; + + /* + * Stop TX on this interface first. + */ + netif_tx_stop_all_queues(dev); + + /* + * Now delete all active aggregation sessions. + */ + rcu_read_lock(); + + list_for_each_entry_rcu(sta, &local->sta_list, list) { + if (sta->sdata == sdata) + ieee80211_sta_tear_down_BA_sessions(sdata, sta->addr); + } + + rcu_read_unlock(); + + /* + * Remove all stations associated with this interface. + * + * This must be done before calling ops->remove_interface() + * because otherwise we can later invoke ops->sta_notify() + * whenever the STAs are removed, and that invalidates driver + * assumptions about always getting a vif pointer that is valid + * (because if we remove a STA after ops->remove_interface() + * the driver will have removed the vif info already!) + * + * We could relax this and only unlink the stations from the + * hash table and list but keep them on a per-sdata list that + * will be inserted back again when the interface is brought + * up again, but I don't currently see a use case for that, + * except with WDS which gets a STA entry created when it is + * brought up. + */ + sta_info_flush(local, sdata); + + /* + * Don't count this interface for promisc/allmulti while it + * is down. dev_mc_unsync() will invoke set_multicast_list + * on the master interface which will sync these down to the + * hardware as filter flags. + */ + if (sdata->flags & IEEE80211_SDATA_ALLMULTI) + atomic_dec(&local->iff_allmultis); + + if (sdata->flags & IEEE80211_SDATA_PROMISC) + atomic_dec(&local->iff_promiscs); + + dev_mc_unsync(local->mdev, dev); + + /* APs need special treatment */ + if (sdata->vif.type == NL80211_IFTYPE_AP) { + struct ieee80211_sub_if_data *vlan, *tmp; + struct beacon_data *old_beacon = sdata->u.ap.beacon; + + /* remove beacon */ + rcu_assign_pointer(sdata->u.ap.beacon, NULL); + synchronize_rcu(); + kfree(old_beacon); + + /* down all dependent devices, that is VLANs */ + list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans, + u.vlan.list) + dev_close(vlan->dev); + WARN_ON(!list_empty(&sdata->u.ap.vlans)); + } + + local->open_count--; + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + list_del(&sdata->u.vlan.list); + /* no need to tell driver */ + break; + case NL80211_IFTYPE_MONITOR: + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs--; + break; + } + + local->monitors--; + if (local->monitors == 0) + local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; + + if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) + local->fif_fcsfail--; + if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) + local->fif_plcpfail--; + if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) + local->fif_control--; + if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) + local->fif_other_bss--; + + netif_addr_lock_bh(local->mdev); + ieee80211_configure_filter(local); + netif_addr_unlock_bh(local->mdev); + break; + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + sdata->u.sta.state = IEEE80211_STA_MLME_DISABLED; + memset(sdata->u.sta.bssid, 0, ETH_ALEN); + del_timer_sync(&sdata->u.sta.timer); + /* + * If the timer fired while we waited for it, it will have + * requeued the work. Now the work will be running again + * but will not rearm the timer again because it checks + * whether the interface is running, which, at this point, + * it no longer is. + */ + cancel_work_sync(&sdata->u.sta.work); + /* + * When we get here, the interface is marked down. + * Call synchronize_rcu() to wait for the RX path + * should it be using the interface and enqueuing + * frames at this very time on another CPU. + */ + synchronize_rcu(); + skb_queue_purge(&sdata->u.sta.skb_queue); + + sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED; + kfree(sdata->u.sta.extra_ie); + sdata->u.sta.extra_ie = NULL; + sdata->u.sta.extra_ie_len = 0; + /* fall through */ + case NL80211_IFTYPE_MESH_POINT: + if (ieee80211_vif_is_mesh(&sdata->vif)) { + /* allmulti is always set on mesh ifaces */ + atomic_dec(&local->iff_allmultis); + ieee80211_stop_mesh(sdata); + } + /* fall through */ + default: + if (local->scan_sdata == sdata) { + if (!local->ops->hw_scan) + cancel_delayed_work_sync(&local->scan_work); + /* + * The software scan can no longer run now, so we can + * clear out the scan_sdata reference. However, the + * hardware scan may still be running. The complete + * function must be prepared to handle a NULL value. + */ + local->scan_sdata = NULL; + /* + * The memory barrier guarantees that another CPU + * that is hardware-scanning will now see the fact + * that this interface is gone. + */ + smp_mb(); + /* + * If software scanning, complete the scan but since + * the scan_sdata is NULL already don't send out a + * scan event to userspace -- the scan is incomplete. + */ + if (local->sw_scanning) + ieee80211_scan_completed(&local->hw); + } + + conf.vif = &sdata->vif; + conf.type = sdata->vif.type; + conf.mac_addr = dev->dev_addr; + /* disable all keys for as long as this netdev is down */ + ieee80211_disable_keys(sdata); + local->ops->remove_interface(local_to_hw(local), &conf); + } + + sdata->bss = NULL; + + if (local->open_count == 0) { + if (netif_running(local->mdev)) + dev_close(local->mdev); + + if (local->ops->stop) + local->ops->stop(local_to_hw(local)); + + ieee80211_led_radio(local, 0); + + flush_workqueue(local->hw.workqueue); + + tasklet_disable(&local->tx_pending_tasklet); + tasklet_disable(&local->tasklet); + } + + return 0; +} + +static void ieee80211_set_multicast_list(struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + int allmulti, promisc, sdata_allmulti, sdata_promisc; + + allmulti = !!(dev->flags & IFF_ALLMULTI); + promisc = !!(dev->flags & IFF_PROMISC); + sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI); + sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC); + + if (allmulti != sdata_allmulti) { + if (dev->flags & IFF_ALLMULTI) + atomic_inc(&local->iff_allmultis); + else + atomic_dec(&local->iff_allmultis); + sdata->flags ^= IEEE80211_SDATA_ALLMULTI; + } + + if (promisc != sdata_promisc) { + if (dev->flags & IFF_PROMISC) + atomic_inc(&local->iff_promiscs); + else + atomic_dec(&local->iff_promiscs); + sdata->flags ^= IEEE80211_SDATA_PROMISC; + } + + dev_mc_sync(local->mdev, dev); +} + +static void ieee80211_if_setup(struct net_device *dev) +{ + ether_setup(dev); + dev->hard_start_xmit = ieee80211_subif_start_xmit; + dev->wireless_handlers = &ieee80211_iw_handler_def; + dev->set_multicast_list = ieee80211_set_multicast_list; + dev->change_mtu = ieee80211_change_mtu; + dev->open = ieee80211_open; + dev->stop = ieee80211_stop; + dev->destructor = free_netdev; + /* we will validate the address ourselves in ->open */ + dev->validate_addr = NULL; +} /* * Called when the netdev is removed or, by the code below, before * the interface type changes. -- cgit v1.2.3