From 34a961f7db36f10abd6b153411fe8c810f21f6b3 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 9 May 2008 09:35:41 -0700 Subject: mac80211 : Association with 11n hidden ssid ap. This patch fixes the association problem with 11n hidden ssid ap. Patch fixes the problem of associating with hidden ssid when all three parameters ap,essid and channel are given to iwconfig. This patch removes the condition of checking three parameters and always checks for bss in bss list while associating. Signed-off-by: Abhijeet Kolekar Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4adba09e80c..e470bf12b76 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3446,21 +3446,17 @@ static int ieee80211_sta_config_auth(struct net_device *dev, struct ieee80211_sta_bss *bss, *selected = NULL; int top_rssi = 0, freq; - if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL | - IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) { - ifsta->state = IEEE80211_AUTHENTICATE; - ieee80211_sta_reset_auth(dev, ifsta); - return 0; - } - spin_lock_bh(&local->sta_bss_lock); freq = local->oper_channel->center_freq; list_for_each_entry(bss, &local->sta_bss_list, list) { if (!(bss->capability & WLAN_CAPABILITY_ESS)) continue; - if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^ - !!sdata->default_key) + if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL | + IEEE80211_STA_AUTO_BSSID_SEL | + IEEE80211_STA_AUTO_CHANNEL_SEL)) && + (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^ + !!sdata->default_key)) continue; if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) && -- cgit v1.2.3 From 2f561feb386d6adefbad63c59a1fcd298ac6a79c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 10 May 2008 13:40:49 +0200 Subject: mac80211: Add RTNL version of ieee80211_iterate_active_interfaces Since commit e38bad4766a110b61fa6038f10be16ced8c6cc38 mac80211: make ieee80211_iterate_active_interfaces not need rtnl rt2500usb and rt73usb broke down due to attempting register access in atomic context (which is not possible for USB hardware). This patch restores ieee80211_iterate_active_interfaces() to use RTNL lock, and provides the non-RTNL version under a new name: ieee80211_iterate_active_interfaces_atomic() So far only rt2x00 uses ieee80211_iterate_active_interfaces(), and those drivers require the RTNL version of ieee80211_iterate_active_interfaces(). Since they already call that function directly, this patch will automatically fix the USB rt2x00 drivers. v2: Rename ieee80211_iterate_active_interfaces_rtnl Signed-off-by: Ivo van Doorn Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/util.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 24a465c4df0..131e9e6c8a3 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -389,6 +389,41 @@ void ieee80211_iterate_active_interfaces( struct ieee80211_local *local = hw_to_local(hw); struct ieee80211_sub_if_data *sdata; + rtnl_lock(); + + list_for_each_entry(sdata, &local->interfaces, list) { + switch (sdata->vif.type) { + case IEEE80211_IF_TYPE_INVALID: + case IEEE80211_IF_TYPE_MNTR: + case IEEE80211_IF_TYPE_VLAN: + continue; + case IEEE80211_IF_TYPE_AP: + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_IBSS: + case IEEE80211_IF_TYPE_WDS: + case IEEE80211_IF_TYPE_MESH_POINT: + break; + } + if (sdata->dev == local->mdev) + continue; + if (netif_running(sdata->dev)) + iterator(data, sdata->dev->dev_addr, + &sdata->vif); + } + + rtnl_unlock(); +} +EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces); + +void ieee80211_iterate_active_interfaces_atomic( + struct ieee80211_hw *hw, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_sub_if_data *sdata; + rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) { @@ -413,4 +448,4 @@ void ieee80211_iterate_active_interfaces( rcu_read_unlock(); } -EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces); +EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic); -- cgit v1.2.3 From 51e779f0daa5c712439d37b907d58543e4fcf12a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 19 May 2008 07:18:10 +0200 Subject: mac80211: don't claim iwspy support We removed iwspy support a very long time ago because it is useless, but forgot to stop claiming to support it. Apparently, nobody cares, but remove it nonetheless. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/wext.c | 1 - 1 file changed, 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 76e1de1dc73..457ebf9e85a 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -209,7 +209,6 @@ static int ieee80211_ioctl_giwrange(struct net_device *dev, range->num_frequency = c; IW_EVENT_CAPA_SET_KERNEL(range->event_capa); - IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); -- cgit v1.2.3 From 0d580a774b3682b8b2b5c89ab9b813d149ef28e7 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Tue, 20 May 2008 09:56:37 +0200 Subject: mac80211: fix NULL pointer dereference in ieee80211_compatible_rates Fix a possible NULL pointer dereference in ieee80211_compatible_rates introduced in the patch "mac80211: fix association with some APs". If no bss is available just use all supported rates in the association request. Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e470bf12b76..7cfd12e0d1e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -730,7 +730,17 @@ static void ieee80211_send_assoc(struct net_device *dev, if (bss->wmm_ie) { wmm = 1; } + + /* get all rates supported by the device and the AP as + * some APs don't like getting a superset of their rates + * in the association request (e.g. D-Link DAP 1353 in + * b-only mode) */ + rates_len = ieee80211_compatible_rates(bss, sband, &rates); + ieee80211_rx_bss_put(dev, bss); + } else { + rates = ~0; + rates_len = sband->n_bitrates; } mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); @@ -761,10 +771,7 @@ static void ieee80211_send_assoc(struct net_device *dev, *pos++ = ifsta->ssid_len; memcpy(pos, ifsta->ssid, ifsta->ssid_len); - /* all supported rates should be added here but some APs - * (e.g. D-Link DAP 1353 in b-only mode) don't like that - * Therefore only add rates the AP supports */ - rates_len = ieee80211_compatible_rates(bss, sband, &rates); + /* add all rates which were marked to be used above */ supp_rates_len = rates_len; if (supp_rates_len > 8) supp_rates_len = 8; -- cgit v1.2.3 From 679fda1aa49fddf938bb699df7867c01988371ab Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Tue, 20 May 2008 18:42:54 +0200 Subject: net/mac80211: always true conditionals Correct always true conditionals. Signed-off-by: Nicolas Kaiser Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 699d97b8de5..a9fce4afdf2 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -672,7 +672,7 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, if (params->vlan) { sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN || + if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN && sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; } else @@ -760,7 +760,7 @@ static int ieee80211_change_station(struct wiphy *wiphy, if (params->vlan && params->vlan != sta->sdata->dev) { vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN || + if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN && vlansdata->vif.type != IEEE80211_IF_TYPE_AP) { rcu_read_unlock(); return -EINVAL; -- cgit v1.2.3 From 167ad6f7a2b2ae58dfaa46620b9b3212594f38e6 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 21 May 2008 18:17:05 +0300 Subject: mac80211: fix ieee80211_rx_bss_put/get imbalance This patch fixes iee80211_rx_bss_put/get imbalance introduced by 'mac80211: enable IBSS merging' patch. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7cfd12e0d1e..0ef5993e785 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2479,8 +2479,6 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, ifsta->state = IEEE80211_IBSS_JOINED; mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL); - ieee80211_rx_bss_put(dev, bss); - return res; } @@ -3523,6 +3521,7 @@ static int ieee80211_sta_create_ibss(struct net_device *dev, struct ieee80211_supported_band *sband; u8 bssid[ETH_ALEN], *pos; int i; + int ret; DECLARE_MAC_BUF(mac); #if 0 @@ -3567,7 +3566,9 @@ static int ieee80211_sta_create_ibss(struct net_device *dev, *pos++ = (u8) (rate / 5); } - return ieee80211_sta_join_ibss(dev, ifsta, bss); + ret = ieee80211_sta_join_ibss(dev, ifsta, bss); + ieee80211_rx_bss_put(dev, bss); + return ret; } @@ -3615,10 +3616,13 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, (bss = ieee80211_rx_bss_get(dev, bssid, local->hw.conf.channel->center_freq, ifsta->ssid, ifsta->ssid_len))) { + int ret; printk(KERN_DEBUG "%s: Selected IBSS BSSID %s" " based on configured SSID\n", dev->name, print_mac(mac, bssid)); - return ieee80211_sta_join_ibss(dev, ifsta, bss); + ret = ieee80211_sta_join_ibss(dev, ifsta, bss); + ieee80211_rx_bss_put(dev, bss); + return ret; } #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG " did not try to join ibss\n"); -- cgit v1.2.3 From 9381be059bf5831d259e8735005cfa35b7488543 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 23 May 2008 01:36:36 +0300 Subject: mac80211: reorder channel and freq reporting in wext scan report This patch switch order of channel and freq (SIOCGIWFREQ) reports in scan results in order to overcome wpa_supplicant inability to handle channel numbers in 5.2Ghz band. Wext reporting channel number is ambiguous as channels 7-12 (802.11j) exist on both bands. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Acked-by: Dan Williams Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0ef5993e785..c29927c4977 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4099,18 +4099,17 @@ ieee80211_sta_scan_result(struct net_device *dev, memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = bss->freq; - iwe.u.freq.e = 6; + iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq); + iwe.u.freq.e = 0; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq); - iwe.u.freq.e = 0; + iwe.u.freq.m = bss->freq; + iwe.u.freq.e = 6; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); - memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVQUAL; iwe.u.qual.qual = bss->signal; -- cgit v1.2.3 From d4231ca3e162387a2b6964dacaa83604e065c4e9 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 23 May 2008 10:15:26 -0700 Subject: mac80211 : Fixes the status message for iwconfig iwconfig was showing incorrect status messages when disassociated. Patch fixes this by always checking for association status in ioctl calls for getting ap address. Signed-off-by: Abhijeet Kolekar Acked-by: Dan Williams Signed-off-by: John W. Linville --- net/mac80211/wext.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 457ebf9e85a..8311bb24f9f 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -489,9 +489,14 @@ static int ieee80211_ioctl_giwap(struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA || sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - ap_addr->sa_family = ARPHRD_ETHER; - memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); - return 0; + if (sdata->u.sta.state == IEEE80211_ASSOCIATED) { + ap_addr->sa_family = ARPHRD_ETHER; + memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); + return 0; + } else { + memset(&ap_addr->sa_data, 0, ETH_ALEN); + return 0; + } } else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN); -- cgit v1.2.3 From f6d97104890203ba9c2cf8e34894c4c8e64cb880 Mon Sep 17 00:00:00 2001 From: Yi Zhu Date: Tue, 27 May 2008 17:50:50 +0300 Subject: mac80211: fix a typo in ieee80211_handle_filtered_frame comment fix a typo in ieee80211_handle_filtered_frame comment Signed-off-by: Yi Zhu Signed-off-by: John W. Linville --- net/mac80211/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 915afadb060..5c876450b14 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1313,7 +1313,7 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, /* * Clear the TX filter mask for this STA when sending the next * packet. If the STA went to power save mode, this will happen - * happen when it wakes up for the next time. + * when it wakes up for the next time. */ sta->flags |= WLAN_STA_CLEAR_PS_FILT; -- cgit v1.2.3 From 70d251b24c44ab2fcba1807a5206e844cf10eb38 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 28 May 2008 20:08:12 +0530 Subject: mac80211: Fix for NULL pointer dereference in sta_info_get() This addresses a NULL pointer dereference in sta_info_get(). TID and sta_info are extracted in ADDBA Timer expiry function through the timer handler's argument. The problem is extracging the TID (which was stored in timer_to_tid[] array of type "u8") through "int *" typecast which may also yield unwanted bytes for the MSB of TID that results in incorrect sta_info and ieee80211_local pointers. ieee80211_local pointer is NULL as illustrated below, it crashes in sta_info_get(). The problem started when extracting ieee80211_local pointer out of sta_info iteself and eventually crashed in stat_info_get(). The proper way to fix is to change the data type of TID to u8 instead of u16. However changing all the occurences requires some prototype changes as well. We should fix this in upcoming patches. Signed-off-by: Senthil Balasubramanian Signed-off-by: Luis Rodriguez Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c29927c4977..33a356e7b66 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1614,7 +1614,7 @@ void sta_addba_resp_timer_expired(unsigned long data) * only one argument, and both sta_info and TID are needed, so init * flow in sta_info_create gives the TID as data, while the timer_to_id * array gives the sta through container_of */ - u16 tid = *(int *)data; + u16 tid = *(u8 *)data; struct sta_info *temp_sta = container_of((void *)data, struct sta_info, timer_to_tid[tid]); @@ -1662,7 +1662,7 @@ timer_expired_exit: void sta_rx_agg_session_timer_expired(unsigned long data) { /* not an elegant detour, but there is no choice as the timer passes - * only one argument, and verious sta_info are needed here, so init + * only one argument, and various sta_info are needed here, so init * flow in sta_info_create gives the TID as data, while the timer_to_id * array gives the sta through container_of */ u8 *ptid = (u8 *)data; -- cgit v1.2.3 From c97c23e38625f59e3e9869664eeeb0cab1822948 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 28 May 2008 23:15:32 +0530 Subject: mac80211: fix alignment issue with compare_ether_addr() This addresses an alignment issue with compare_ether_addr(). The addresses passed to compare_ether_addr should be two bytes aligned. It may function properly in x86 platform. However may not work properly on IA-64 or ARM processor. This also fixes a typo in mlme.c where the sk_buff struct name is incorect. Though sizeof() works for any incorrect structure pointer name as its just a pointer length that we want, lets just fix it. Signed-off-by: Senthil Balasubramanian Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 4 ++-- net/mac80211/rx.c | 4 ++-- net/mac80211/util.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 33a356e7b66..841278f1df8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1325,7 +1325,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, /* prepare reordering buffer */ tid_agg_rx->reorder_buf = - kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC); + kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC); if (!tid_agg_rx->reorder_buf) { if (net_ratelimit()) printk(KERN_ERR "can not allocate reordering buffer " @@ -1334,7 +1334,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, goto end; } memset(tid_agg_rx->reorder_buf, 0, - buf_size * sizeof(struct sk_buf *)); + buf_size * sizeof(struct sk_buff *)); if (local->ops->ampdu_action) ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1958bfb361c..0941e5d6a52 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1091,7 +1091,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx) u16 fc, hdrlen, ethertype; u8 *payload; u8 dst[ETH_ALEN]; - u8 src[ETH_ALEN]; + u8 src[ETH_ALEN] __aligned(2); struct sk_buff *skb = rx->skb; struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); DECLARE_MAC_BUF(mac); @@ -1234,7 +1234,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx) */ static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx) { - static const u8 pae_group_addr[ETH_ALEN] + static const u8 pae_group_addr[ETH_ALEN] __aligned(2) = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 }; struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 131e9e6c8a3..4e97b266f90 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -34,11 +34,11 @@ void *mac80211_wiphy_privid = &mac80211_wiphy_privid; /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ -const unsigned char rfc1042_header[] = +const unsigned char rfc1042_header[] __aligned(2) = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -const unsigned char bridge_tunnel_header[] = +const unsigned char bridge_tunnel_header[] __aligned(2) = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; -- cgit v1.2.3 From 507b06d0622480f8026d49a94f86068bb0fd6ed6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 3 Jun 2008 23:39:55 -0400 Subject: mac80211: send association event on IBSS create Otherwise userspace has no idea the IBSS creation succeeded. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 841278f1df8..af375da9df2 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2336,6 +2336,7 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, u8 *pos; struct ieee80211_sub_if_data *sdata; struct ieee80211_supported_band *sband; + union iwreq_data wrqu; sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; @@ -2479,6 +2480,10 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, ifsta->state = IEEE80211_IBSS_JOINED; mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL); + memset(&wrqu, 0, sizeof(wrqu)); + memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN); + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); + return res; } -- cgit v1.2.3 From ad81b2f97d42e13ef78bb3798e046cd5f0492980 Mon Sep 17 00:00:00 2001 From: Assaf Krauss Date: Wed, 4 Jun 2008 20:27:59 +0300 Subject: mac80211: Fixing slow IBSS rejoin This patch fixes the issue of slow reconnection to an IBSS cell after disconnection from it. Now the interface's bssid is reset upon ifdown. ieee80211_sta_find_ibss: if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 && (bss = ieee80211_rx_bss_get(dev, bssid, local->hw.conf.channel->center_freq, ifsta->ssid, ifsta->ssid_len))) Note: In general disconnection is still not handled properly in mac80211 Signed-off-by: Assaf Krauss Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 5c876450b14..98c0b5e56ec 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -511,6 +511,7 @@ static int ieee80211_stop(struct net_device *dev) case IEEE80211_IF_TYPE_STA: case IEEE80211_IF_TYPE_IBSS: sdata->u.sta.state = IEEE80211_DISABLED; + memset(sdata->u.sta.bssid, 0, ETH_ALEN); del_timer_sync(&sdata->u.sta.timer); /* * When we get here, the interface is marked down. -- cgit v1.2.3 From 872ba53395b2a8be08c3ea2d39e225e5b4a8cb40 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 4 Jun 2008 13:59:34 -0400 Subject: mac80211: decrease IBSS creation latency Sufficient scans (at least 2 or 3) should have been done within 7 seconds to find an existing IBSS to join. This should improve IBSS creation latency; and since IBSS merging is still in effect, shouldn't have detrimental effects on eventual IBSS convergence. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index af375da9df2..affe42f8484 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -44,7 +44,7 @@ #define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ) #define IEEE80211_SCAN_INTERVAL (2 * HZ) #define IEEE80211_SCAN_INTERVAL_SLOW (15 * HZ) -#define IEEE80211_IBSS_JOIN_TIMEOUT (20 * HZ) +#define IEEE80211_IBSS_JOIN_TIMEOUT (7 * HZ) #define IEEE80211_PROBE_DELAY (HZ / 33) #define IEEE80211_CHANNEL_TIME (HZ / 33) -- cgit v1.2.3 From be038b376465953c358d675cb38a611898a49dc2 Mon Sep 17 00:00:00 2001 From: Assaf Krauss Date: Thu, 5 Jun 2008 19:55:21 +0300 Subject: mac80211: Checking IBSS support while changing channel in ad-hoc mode This patch adds a check to the set_channel flow. When attempting to change the channel while in IBSS mode, and the new channel does not support IBSS mode, the flow return with an error value with no consequences on the mac80211 and driver state. Signed-off-by: Assaf Krauss Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/mlme.c | 11 ++++------- net/mac80211/wext.c | 15 +++++++++++---- 3 files changed, 16 insertions(+), 12 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c7314bf4bec..006486b2672 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -899,7 +899,7 @@ extern const struct iw_handler_def ieee80211_iw_handler_def; /* ieee80211_ioctl.c */ -int ieee80211_set_freq(struct ieee80211_local *local, int freq); +int ieee80211_set_freq(struct net_device *dev, int freq); /* ieee80211_sta.c */ void ieee80211_sta_timer(unsigned long data); void ieee80211_sta_work(struct work_struct *work); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index affe42f8484..4d2b582dd05 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2359,13 +2359,10 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, sdata->drop_unencrypted = bss->capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; - res = ieee80211_set_freq(local, bss->freq); + res = ieee80211_set_freq(dev, bss->freq); - if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) { - printk(KERN_DEBUG "%s: IBSS not allowed on frequency " - "%d MHz\n", dev->name, local->oper_channel->center_freq); - return -1; - } + if (res) + return res; /* Set beacon template */ skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); @@ -3491,7 +3488,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev, spin_unlock_bh(&local->sta_bss_lock); if (selected) { - ieee80211_set_freq(local, selected->freq); + ieee80211_set_freq(dev, selected->freq); if (!(ifsta->flags & IEEE80211_STA_SSID_SET)) ieee80211_sta_set_ssid(dev, selected->ssid, selected->ssid_len); diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 8311bb24f9f..a8bb8e31b1e 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -290,14 +290,22 @@ static int ieee80211_ioctl_giwmode(struct net_device *dev, return 0; } -int ieee80211_set_freq(struct ieee80211_local *local, int freqMHz) +int ieee80211_set_freq(struct net_device *dev, int freqMHz) { int ret = -EINVAL; struct ieee80211_channel *chan; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); chan = ieee80211_get_channel(local->hw.wiphy, freqMHz); if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) { + if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && + chan->flags & IEEE80211_CHAN_NO_IBSS) { + printk(KERN_DEBUG "%s: IBSS not allowed on frequency " + "%d MHz\n", dev->name, chan->center_freq); + return ret; + } local->oper_channel = chan; if (local->sta_sw_scanning || local->sta_hw_scanning) @@ -315,7 +323,6 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev, struct iw_request_info *info, struct iw_freq *freq, char *extra) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA) @@ -329,14 +336,14 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev, IEEE80211_STA_AUTO_CHANNEL_SEL; return 0; } else - return ieee80211_set_freq(local, + return ieee80211_set_freq(dev, ieee80211_channel_to_frequency(freq->m)); } else { int i, div = 1000000; for (i = 0; i < freq->e; i++) div /= 10; if (div > 0) - return ieee80211_set_freq(local, freq->m / div); + return ieee80211_set_freq(dev, freq->m / div); else return -EINVAL; } -- cgit v1.2.3 From 5c5f9664d5284d8542062fed39e1f19b80db7aa5 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Thu, 12 Jun 2008 09:47:16 +0800 Subject: mac80211 : fix for iwconfig in ad-hoc mode The patch checks interface status, if it is in IBSS_JOINED mode show cell id it is associated with. Signed-off-by: Abhijeet Kolekar Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- net/mac80211/wext.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index a8bb8e31b1e..6106cb79060 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -496,7 +496,8 @@ static int ieee80211_ioctl_giwap(struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA || sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - if (sdata->u.sta.state == IEEE80211_ASSOCIATED) { + if (sdata->u.sta.state == IEEE80211_ASSOCIATED || + sdata->u.sta.state == IEEE80211_IBSS_JOINED) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); return 0; -- cgit v1.2.3 From 995ad6c5a415c9389d094d246ca1b305c1e31813 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 12 Jun 2008 20:08:19 +0300 Subject: mac80211: add missing new line in debug print HT_DEBUG This patch adds '\n' in debug printk (wme.c HT DEBUG) Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/wme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index dc1598b8600..635b996c8c3 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -673,7 +673,7 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, #ifdef CONFIG_MAC80211_HT_DEBUG if (net_ratelimit()) printk(KERN_DEBUG "allocated aggregation queue" - " %d tid %d addr %s pool=0x%lX", + " %d tid %d addr %s pool=0x%lX\n", i, tid, print_mac(mac, sta->addr), q->qdisc_pool[0]); #endif /* CONFIG_MAC80211_HT_DEBUG */ -- cgit v1.2.3 From 3a5be7d4b079f3a9ce1e8ce4a93ba15ae6d00111 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 18 Jun 2008 01:19:51 -0700 Subject: Revert "mac80211: Use skb_header_cloned() on TX path." This reverts commit 608961a5eca8d3c6bd07172febc27b5559408c5d. The problem is that the mac80211 stack not only needs to be able to muck with the link-level headers, it also might need to mangle all of the packet data if doing sw wireless encryption. This fixes kernel bugzilla #10903. Thanks to Didier Raboud (for the bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for bringing this bisection analysis to my attention), and Ilpo (for trying to analyze this purely from the TCP side). In 2.6.27 we can take another stab at this, by using something like skb_cow_data() when the TX path of mac80211 ends up with a non-NULL tx->key. The ESP protocol code in the IPSEC stack can be used as a model for implementation. Signed-off-by: David S. Miller --- net/mac80211/tx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1d7dd54aace..28d8bd53bd3 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1562,13 +1562,13 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, * be cloned. This could happen, e.g., with Linux bridge code passing * us broadcast frames. */ - if (head_need > 0 || skb_header_cloned(skb)) { + if (head_need > 0 || skb_cloned(skb)) { #if 0 printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes " "of headroom\n", dev->name, head_need); #endif - if (skb_header_cloned(skb)) + if (skb_cloned(skb)) I802_DEBUG_INC(local->tx_expand_skb_head_cloned); else I802_DEBUG_INC(local->tx_expand_skb_head); -- cgit v1.2.3 From ef3a62d272f033989e83eb1f26505f93f93e3e69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jun 2008 15:39:48 -0700 Subject: mac80211: detect driver tx bugs When a driver rejects a frame in it's ->tx() callback, it must also stop queues, otherwise mac80211 can go into a loop here. Detect this situation and abort the loop after five retries, warning about the driver bug. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/mac80211/tx.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 28d8bd53bd3..c80d5899f27 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1132,7 +1132,7 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb, ieee80211_tx_handler *handler; struct ieee80211_tx_data tx; ieee80211_tx_result res = TX_DROP, res_prepare; - int ret, i; + int ret, i, retries = 0; WARN_ON(__ieee80211_queue_pending(local, control->queue)); @@ -1216,6 +1216,13 @@ retry: if (!__ieee80211_queue_stopped(local, control->queue)) { clear_bit(IEEE80211_LINK_STATE_PENDING, &local->state[control->queue]); + retries++; + /* + * Driver bug, it's rejecting packets but + * not stopping queues. + */ + if (WARN_ON_ONCE(retries > 5)) + goto drop; goto retry; } memcpy(&store->control, control, -- cgit v1.2.3 From 00eb7fe77eb455f807c396f9917f0f623d4c84bb Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 26 Jun 2008 12:13:46 +0300 Subject: mac80211: fix an oops in several failure paths in key allocation This patch fixes an oops in several failure paths in key allocation. This Oops occurs when freeing a key that has not been linked yet, so the key->sdata is not set. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/key.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 150d66dbda9..220e83be3ef 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -380,6 +380,15 @@ void ieee80211_key_free(struct ieee80211_key *key) if (!key) return; + if (!key->sdata) { + /* The key has not been linked yet, simply free it + * and don't Oops */ + if (key->conf.alg == ALG_CCMP) + ieee80211_aes_key_free(key->u.ccmp.tfm); + kfree(key); + return; + } + spin_lock_irqsave(&key->sdata->local->key_lock, flags); __ieee80211_key_free(key); spin_unlock_irqrestore(&key->sdata->local->key_lock, flags); -- cgit v1.2.3 From 23976efedd5ecb420b87455787c537eb4aed1981 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 28 Jun 2008 02:50:13 +0300 Subject: mac80211: don't accept WEP keys other than WEP40 and WEP104 This patch makes mac80211 refuse a WEP key whose length is not WEP40 nor WEP104. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/wext.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 6106cb79060..e8404212ad5 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -95,6 +95,13 @@ static int ieee80211_set_encryption(struct net_device *dev, u8 *sta_addr, } } + if (alg == ALG_WEP && + key_len != LEN_WEP40 && key_len != LEN_WEP104) { + ieee80211_key_free(key); + err = -EINVAL; + goto out_unlock; + } + ieee80211_key_link(key, sdata, sta); if (set_tx_key || (!sta && !sdata->default_key && key)) -- cgit v1.2.3 From ff31ab56c0e900235f653e375fc3b01ba2d8d6a3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:52:38 -0700 Subject: net-sched: change tcf_destroy_chain() to clear start of filter list Pass double tcf_proto pointers to tcf_destroy_chain() to make it clear the start of the filter list for more consistency. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/mac80211/wme.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 635b996c8c3..5d09e8698b5 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -323,8 +323,7 @@ static void wme_qdiscop_destroy(struct Qdisc* qd) struct ieee80211_hw *hw = &local->hw; int queue; - tcf_destroy_chain(q->filter_list); - q->filter_list = NULL; + tcf_destroy_chain(&q->filter_list); for (queue=0; queue < hw->queues; queue++) { skb_queue_purge(&q->requeued[queue]); -- cgit v1.2.3 From 8db9369ff92b1cd93566baadd8bd2992f025fdd0 Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Thu, 3 Jul 2008 19:56:13 +0300 Subject: mac80211: move netif_carrier_on to after ieee80211_bss_info_change_notify Putting netif_carrier_on before configuring the driver/device with the new association state may cause a race (tx frames may be sent before configuration is done) Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4d2b582dd05..a7018540ae8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -547,15 +547,14 @@ static void ieee80211_set_associated(struct net_device *dev, sdata->bss_conf.ht_bss_conf = &conf->ht_bss_conf; } - netif_carrier_on(dev); ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET; memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN); memcpy(wrqu.ap_addr.sa_data, sdata->u.sta.bssid, ETH_ALEN); ieee80211_sta_send_associnfo(dev, ifsta); } else { + netif_carrier_off(dev); ieee80211_sta_tear_down_BA_sessions(dev, ifsta->bssid); ifsta->flags &= ~IEEE80211_STA_ASSOCIATED; - netif_carrier_off(dev); ieee80211_reset_erp_info(dev); sdata->bss_conf.assoc_ht = 0; @@ -569,6 +568,10 @@ static void ieee80211_set_associated(struct net_device *dev, sdata->bss_conf.assoc = assoc; ieee80211_bss_info_change_notify(sdata, changed); + + if (assoc) + netif_carrier_on(dev); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); } -- cgit v1.2.3 From ea0c925370b33baf168bb33782c613468c1aa119 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Thu, 3 Jul 2008 19:02:44 +0200 Subject: mac80211: Only flush workqueue when last interface was removed Currently the ieee80211_hw->workqueue is flushed each time an interface is being removed. However most scheduled work is not interface specific but device specific, for example things like periodic work for link tuners. This patch will move the flush_workqueue() call to directly behind the call to ops->stop() to make sure the workqueue is only flushed when all interfaces are gone and there really shouldn't be any scheduled work in the drivers left. Signed-off-by: Ivo van Doorn Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 98c0b5e56ec..df0836ff1a2 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -530,8 +530,6 @@ static int ieee80211_stop(struct net_device *dev) local->sta_hw_scanning = 0; } - flush_workqueue(local->hw.workqueue); - sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED; kfree(sdata->u.sta.extra_ie); sdata->u.sta.extra_ie = NULL; @@ -555,6 +553,8 @@ static int ieee80211_stop(struct net_device *dev) ieee80211_led_radio(local, 0); + flush_workqueue(local->hw.workqueue); + tasklet_disable(&local->tx_pending_tasklet); tasklet_disable(&local->tasklet); } -- cgit v1.2.3 From 6e43829bb69bf1d584a592075f1357590eb49b1a Mon Sep 17 00:00:00 2001 From: Vladimir Koutny Date: Mon, 7 Jul 2008 14:23:01 +0200 Subject: mac80211: don't report selected IBSS when not found Don't report a 'selected' IBSS in sta_find_ibss when none was found. Signed-off-by: Vladimir Koutny Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a7018540ae8..b404537c0bc 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3614,8 +3614,10 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, spin_unlock_bh(&local->sta_bss_lock); #ifdef CONFIG_MAC80211_IBSS_DEBUG - printk(KERN_DEBUG " sta_find_ibss: selected %s current " - "%s\n", print_mac(mac, bssid), print_mac(mac2, ifsta->bssid)); + if (found) + printk(KERN_DEBUG " sta_find_ibss: selected %s current " + "%s\n", print_mac(mac, bssid), + print_mac(mac2, ifsta->bssid)); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 && (bss = ieee80211_rx_bss_get(dev, bssid, -- cgit v1.2.3 From adeed48090fc370afa0db8d007748ee72a40b578 Mon Sep 17 00:00:00 2001 From: Mattias Nissler Date: Mon, 7 Jul 2008 23:08:19 +0200 Subject: rc80211_pid: Fix fast_start parameter handling This removes the fast_start parameter from the rc_pid parameters information and instead uses the parameter macro when initializing the rc_pid state. Since the parameter is only used on initialization, there is no point of making exporting it via debugfs. This also fixes uninitialized memory references to the fast_start and norm_offset parameters detected by the kmemcheck utility. Thanks to Vegard Nossum for reporting the bug. Signed-off-by: Mattias Nissler Signed-off-by: John W. Linville --- net/mac80211/rc80211_pid.h | 5 ----- net/mac80211/rc80211_pid_algo.c | 31 +++++++++++++------------------ 2 files changed, 13 insertions(+), 23 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h index 04afc13ed82..4ea7b97d1af 100644 --- a/net/mac80211/rc80211_pid.h +++ b/net/mac80211/rc80211_pid.h @@ -141,7 +141,6 @@ struct rc_pid_events_file_info { * rate behaviour values (lower means we should trust more what we learnt * about behaviour of rates, higher means we should trust more the natural * ordering of rates) - * @fast_start: if Y, push high rates right after initialization */ struct rc_pid_debugfs_entries { struct dentry *dir; @@ -154,7 +153,6 @@ struct rc_pid_debugfs_entries { struct dentry *sharpen_factor; struct dentry *sharpen_duration; struct dentry *norm_offset; - struct dentry *fast_start; }; void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf, @@ -267,9 +265,6 @@ struct rc_pid_info { /* Normalization offset. */ unsigned int norm_offset; - /* Fast starst parameter. */ - unsigned int fast_start; - /* Rates information. */ struct rc_pid_rateinfo *rinfo; diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index a849b745bdb..bcd27c1d759 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -398,13 +398,25 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local) return NULL; } + pinfo->target = RC_PID_TARGET_PF; + pinfo->sampling_period = RC_PID_INTERVAL; + pinfo->coeff_p = RC_PID_COEFF_P; + pinfo->coeff_i = RC_PID_COEFF_I; + pinfo->coeff_d = RC_PID_COEFF_D; + pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT; + pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR; + pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION; + pinfo->norm_offset = RC_PID_NORM_OFFSET; + pinfo->rinfo = rinfo; + pinfo->oldrate = 0; + /* Sort the rates. This is optimized for the most common case (i.e. * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed * mapping too. */ for (i = 0; i < sband->n_bitrates; i++) { rinfo[i].index = i; rinfo[i].rev_index = i; - if (pinfo->fast_start) + if (RC_PID_FAST_START) rinfo[i].diff = 0; else rinfo[i].diff = i * pinfo->norm_offset; @@ -425,19 +437,6 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local) break; } - pinfo->target = RC_PID_TARGET_PF; - pinfo->sampling_period = RC_PID_INTERVAL; - pinfo->coeff_p = RC_PID_COEFF_P; - pinfo->coeff_i = RC_PID_COEFF_I; - pinfo->coeff_d = RC_PID_COEFF_D; - pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT; - pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR; - pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION; - pinfo->norm_offset = RC_PID_NORM_OFFSET; - pinfo->fast_start = RC_PID_FAST_START; - pinfo->rinfo = rinfo; - pinfo->oldrate = 0; - #ifdef CONFIG_MAC80211_DEBUGFS de = &pinfo->dentries; de->dir = debugfs_create_dir("rc80211_pid", @@ -465,9 +464,6 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local) de->norm_offset = debugfs_create_u32("norm_offset", S_IRUSR | S_IWUSR, de->dir, &pinfo->norm_offset); - de->fast_start = debugfs_create_bool("fast_start", - S_IRUSR | S_IWUSR, de->dir, - &pinfo->fast_start); #endif return pinfo; @@ -479,7 +475,6 @@ static void rate_control_pid_free(void *priv) #ifdef CONFIG_MAC80211_DEBUGFS struct rc_pid_debugfs_entries *de = &pinfo->dentries; - debugfs_remove(de->fast_start); debugfs_remove(de->norm_offset); debugfs_remove(de->sharpen_duration); debugfs_remove(de->sharpen_factor); -- cgit v1.2.3