From 8ec4b4ff1c89bb280e662b84eba503ca44abe836 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 25 Jul 2005 20:10:36 +0000 Subject: kbuild: introduce Kbuild.include Kbuild.include is a placeholder for definitions originally present in both the top-level Makefile and scripts/Makefile.build. There were a slight difference in the filechk definition, so the most videly used version was kept and usr/Makefile was adopted for this syntax. Signed-off-by: Sam Ravnborg --- --- scripts/Kbuild.include | 96 ++++++++++++++++++++++++++++++++++++++++++++++++ scripts/Makefile.build | 1 + scripts/Makefile.lib | 94 ----------------------------------------------- scripts/Makefile.modinst | 2 +- scripts/Makefile.modpost | 1 + 5 files changed, 99 insertions(+), 95 deletions(-) create mode 100644 scripts/Kbuild.include (limited to 'scripts') diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include new file mode 100644 index 00000000000..9087273abf9 --- /dev/null +++ b/scripts/Kbuild.include @@ -0,0 +1,96 @@ +#### +# kbuild: Generic definitions + +# Convinient variables +comma := , +empty := +space := $(empty) $(empty) + +### +# The temporary file to save gcc -MD generated dependencies must not +# contain a comma +depfile = $(subst $(comma),_,$(@D)/.$(@F).d) + +### +# filechk is used to check if the content of a generated file is updated. +# Sample usage: +# define filechk_sample +# echo $KERNELRELEASE +# endef +# version.h : Makefile +# $(call filechk,sample) +# The rule defined shall write to stdout the content of the new file. +# The existing file will be compared with the new one. +# - If no file exist it is created +# - If the content differ the new file is used +# - If they are equal no change, and no timestamp update +# - stdin is piped in from the first prerequisite ($<) so one has +# to specify a valid file as first prerequisite (often the kbuild file) +define filechk + $(Q)set -e; \ + echo ' CHK $@'; \ + mkdir -p $(dir $@); \ + $(filechk_$(1)) < $< > $@.tmp; \ + if [ -r $@ ] && cmp -s $@ $@.tmp; then \ + rm -f $@.tmp; \ + else \ + echo ' UPD $@'; \ + mv -f $@.tmp $@; \ + fi +endef + +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= +# Usage: +# $(Q)$(MAKE) $(build)=dir +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj + +# If quiet is set, only print short version of command +cmd = @$(if $($(quiet)cmd_$(1)),\ + echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1)) + +### +# if_changed - execute command if any prerequisite is newer than +# target, or command line has changed +# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies +# including used config symbols +# if_changed_rule - as if_changed but execute rule instead +# See Documentation/kbuild/makefiles.txt for more info + +ifneq ($(KBUILD_NOCMDDEP),1) +# Check if both arguments has same arguments. Result in empty string if equal +# User may override this check using make KBUILD_NOCMDDEP=1 +arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) ) +endif + +# echo command. Short version is $(quiet) equals quiet, otherwise full command +echo-cmd = $(if $($(quiet)cmd_$(1)), \ + echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) + +# function to only execute the passed command if necessary +# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file +# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars +# +if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \ + @set -e; \ + $(echo-cmd) \ + $(cmd_$(1)); \ + echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd) + +# execute the command and also postprocess generated .d dependencies +# file +if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\ + $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \ + @set -e; \ + $(echo-cmd) \ + $(cmd_$(1)); \ + scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \ + rm -f $(depfile); \ + mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd) + +# Usage: $(call if_changed_rule,foo) +# will check if $(cmd_foo) changed, or any of the prequisites changed, +# and if so will execute $(rule_foo) +if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\ + @set -e; \ + $(rule_$(1))) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 282bfb310f5..ebed6a41bc6 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -12,6 +12,7 @@ __build: include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile) +include scripts/Kbuild.include include scripts/Makefile.lib ifdef host-progs diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 6e079f38a2c..0f81dcfd690 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -1,13 +1,3 @@ -# =========================================================================== -# kbuild: Generic definitions -# =========================================================================== - -# Standard vars - -comma := , -empty := -space := $(empty) $(empty) - # Backward compatibility - to be removed... extra-y += $(EXTRA_TARGETS) # Figure out what we need to build from the various variables @@ -84,10 +74,6 @@ multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m)) subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) obj-dirs := $(addprefix $(obj)/,$(obj-dirs)) -# The temporary file to save gcc -MD generated dependencies must not -# contain a comma -depfile = $(subst $(comma),_,$(@D)/.$(@F).d) - # These flags are needed for modversions and compiling, so we define them here # already # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will @@ -179,84 +165,4 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ quiet_cmd_gzip = GZIP $@ cmd_gzip = gzip -f -9 < $< > $@ -# =========================================================================== -# Generic stuff -# =========================================================================== - -ifneq ($(KBUILD_NOCMDDEP),1) -# Check if both arguments has same arguments. Result in empty string if equal -# User may override this check using make KBUILD_NOCMDDEP=1 -arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) ) - -endif - -# echo command. Short version is $(quiet) equals quiet, otherwise full command -echo-cmd = $(if $($(quiet)cmd_$(1)), \ - echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) - -# function to only execute the passed command if necessary -# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file -# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars -# -if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \ - @set -e; \ - $(echo-cmd) \ - $(cmd_$(1)); \ - echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd) - - -# execute the command and also postprocess generated .d dependencies -# file - -if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\ - $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \ - @set -e; \ - $(echo-cmd) \ - $(cmd_$(1)); \ - scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \ - rm -f $(depfile); \ - mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd) - -# Usage: $(call if_changed_rule,foo) -# will check if $(cmd_foo) changed, or any of the prequisites changed, -# and if so will execute $(rule_foo) - -if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\ - @set -e; \ - $(rule_$(1))) - -# If quiet is set, only print short version of command - -cmd = @$(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1)) - -# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= -# Usage: -# $(Q)$(MAKE) $(build)=dir -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj - -# filechk is used to check if the content of a generated file is updated. -# Sample usage: -# define filechk_sample -# echo $KERNELRELEASE -# endef -# version.h : Makefile -# $(call filechk,sample) -# The rule defined shall write to stdout the content of the new file. -# The existing file will be compared with the new one. -# - If no file exist it is created -# - If the content differ the new file is used -# - If they are equal no change, and no timestamp update - -define filechk - $(Q)set -e; \ - echo ' CHK $@'; \ - mkdir -p $(dir $@); \ - $(filechk_$(1)) $(2) > $@.tmp; \ - if [ -r $@ ] && cmp -s $@ $@.tmp; then \ - rm -f $@.tmp; \ - else \ - echo ' UPD $@'; \ - mv -f $@.tmp $@; \ - fi -endef diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst index 85d6494e3c2..23fd1bdc25c 100644 --- a/scripts/Makefile.modinst +++ b/scripts/Makefile.modinst @@ -5,7 +5,7 @@ .PHONY: __modinst __modinst: -include scripts/Makefile.lib +include scripts/Kbuild.include # diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index 94b550e21be..0c4f3a9f2ea 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -36,6 +36,7 @@ _modpost: __modpost include .config +include scripts/Kbuild.include include scripts/Makefile.lib symverfile := $(objtree)/Module.symvers -- cgit v1.2.3