From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- sound/oss/sb_ess.c | 1832 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1832 insertions(+) create mode 100644 sound/oss/sb_ess.c (limited to 'sound/oss/sb_ess.c') diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c new file mode 100644 index 00000000000..fae05fe3de4 --- /dev/null +++ b/sound/oss/sb_ess.c @@ -0,0 +1,1832 @@ +#undef FKS_LOGGING +#undef FKS_TEST + +/* + * tabs should be 4 spaces, in vi(m): set tabstop=4 + * + * TODO: consistency speed calculations!! + * cleanup! + * ????: Did I break MIDI support? + * + * History: + * + * Rolf Fokkens (Dec 20 1998): ES188x recording level support on a per + * fokkensr@vertis.nl input basis. + * (Dec 24 1998): Recognition of ES1788, ES1887, ES1888, + * ES1868, ES1869 and ES1878. Could be used for + * specific handling in the future. All except + * ES1887 and ES1888 and ES688 are handled like + * ES1688. + * (Dec 27 1998): RECLEV for all (?) ES1688+ chips. ES188x now + * have the "Dec 20" support + RECLEV + * (Jan 2 1999): Preparation for Full Duplex. This means + * Audio 2 is now used for playback when dma16 + * is specified. The next step would be to use + * Audio 1 and Audio 2 at the same time. + * (Jan 9 1999): Put all ESS stuff into sb_ess.[ch], this + * includes both the ESS stuff that has been in + * sb_*[ch] before I touched it and the ESS support + * I added later + * (Jan 23 1999): Full Duplex seems to work. I wrote a small + * test proggy which works OK. Haven't found + * any applications to test it though. So why did + * I bother to create it anyway?? :) Just for + * fun. + * (May 2 1999): I tried to be too smart by "introducing" + * ess_calc_best_speed (). The idea was that two + * dividers could be used to setup a samplerate, + * ess_calc_best_speed () would choose the best. + * This works for playback, but results in + * recording problems for high samplerates. I + * fixed this by removing ess_calc_best_speed () + * and just doing what the documentation says. + * Andy Sloane (Jun 4 1999): Stole some code from ALSA to fix the playback + * andy@guildsoftware.com speed on ES1869, ES1879, ES1887, and ES1888. + * 1879's were previously ignored by this driver; + * added (untested) support for those. + * Cvetan Ivanov (Oct 27 1999): Fixed ess_dsp_init to call ess_set_dma_hw for + * zezo@inet.bg _ALL_ ESS models, not only ES1887 + * + * This files contains ESS chip specifics. It's based on the existing ESS + * handling as it resided in sb_common.c, sb_mixer.c and sb_audio.c. This + * file adds features like: + * - Chip Identification (as shown in /proc/sound) + * - RECLEV support for ES1688 and later + * - 6 bits playback level support chips later than ES1688 + * - Recording level support on a per-device basis for ES1887 + * - Full-Duplex for ES1887 + * + * Full duplex is enabled by specifying dma16. While the normal dma must + * be one of 0, 1 or 3, dma16 can be one of 0, 1, 3 or 5. DMA 5 is a 16 bit + * DMA channel, while the others are 8 bit.. + * + * ESS detection isn't full proof (yet). If it fails an additional module + * parameter esstype can be specified to be one of the following: + * -1, 0, 688, 1688, 1868, 1869, 1788, 1887, 1888 + * -1 means: mimic 2.0 behaviour, + * 0 means: auto detect. + * others: explicitly specify chip + * -1 is default, cause auto detect still doesn't work. + */ + +/* + * About the documentation + * + * I don't know if the chips all are OK, but the documentation is buggy. 'cause + * I don't have all the cips myself, there's a lot I cannot verify. I'll try to + * keep track of my latest insights about his here. If you have additional info, + * please enlighten me (fokkensr@vertis.nl)! + * + * I had the impression that ES1688 also has 6 bit master volume control. The + * documentation about ES1888 (rev C, october '95) claims that ES1888 has + * the following features ES1688 doesn't have: + * - 6 bit master volume + * - Full Duplex + * So ES1688 apparently doesn't have 6 bit master volume control, but the + * ES1688 does have RECLEV control. Makes me wonder: does ES688 have it too? + * Without RECLEV ES688 won't be much fun I guess. + * + * From the ES1888 (rev C, october '95) documentation I got the impression + * that registers 0x68 to 0x6e don't exist which means: no recording volume + * controls. To my surprise the ES888 documentation (1/14/96) claims that + * ES888 does have these record mixer registers, but that ES1888 doesn't have + * 0x69 and 0x6b. So the rest should be there. + * + * I'm trying to get ES1887 Full Duplex. Audio 2 is playback only, while Audio 2 + * is both record and playback. I think I should use Audio 2 for all playback. + * + * The documentation is an adventure: it's close but not fully accurate. I + * found out that after a reset some registers are *NOT* reset, though the + * docs say the would be. Interresting ones are 0x7f, 0x7d and 0x7a. They are + * related to the Audio 2 channel. I also was suprised about the consequenses + * of writing 0x00 to 0x7f (which should be done by reset): The ES1887 moves + * into ES1888 mode. This means that it claims IRQ 11, which happens to be my + * ISDN adapter. Needless to say it no longer worked. I now understand why + * after rebooting 0x7f already was 0x05, the value of my choice: the BIOS + * did it. + * + * Oh, and this is another trap: in ES1887 docs mixer register 0x70 is decribed + * as if it's exactly the same as register 0xa1. This is *NOT* true. The + * description of 0x70 in ES1869 docs is accurate however. + * Well, the assumption about ES1869 was wrong: register 0x70 is very much + * like register 0xa1, except that bit 7 is allways 1, whatever you want + * it to be. + * + * When using audio 2 mixer register 0x72 seems te be meaningless. Only 0xa2 + * has effect. + * + * Software reset not being able to reset all registers is great! Especially + * the fact that register 0x78 isn't reset is great when you wanna change back + * to single dma operation (simplex): audio 2 is still operation, and uses the + * same dma as audio 1: your ess changes into a funny echo machine. + * + * Received the new that ES1688 is detected as a ES1788. Did some thinking: + * the ES1887 detection scheme suggests in step 2 to try if bit 3 of register + * 0x64 can be changed. This is inaccurate, first I inverted the * check: "If + * can be modified, it's a 1688", which lead to a correct detection + * of my ES1887. It resulted however in bad detection of 1688 (reported by mail) + * and 1868 (if no PnP detection first): they result in a 1788 being detected. + * I don't have docs on 1688, but I do have docs on 1868: The documentation is + * probably inaccurate in the fact that I should check bit 2, not bit 3. This + * is what I do now. + */ + +/* + * About recognition of ESS chips + * + * The distinction of ES688, ES1688, ES1788, ES1887 and ES1888 is described in + * a (preliminary ??) datasheet on ES1887. It's aim is to identify ES1887, but + * during detection the text claims that "this chip may be ..." when a step + * fails. This scheme is used to distinct between the above chips. + * It appears however that some PnP chips like ES1868 are recognized as ES1788 + * by the ES1887 detection scheme. These PnP chips can be detected in another + * way however: ES1868, ES1869 and ES1878 can be recognized (full proof I think) + * by repeatedly reading mixer register 0x40. This is done by ess_identify in + * sb_common.c. + * This results in the following detection steps: + * - distinct between ES688 and ES1688+ (as always done in this driver) + * if ES688 we're ready + * - try to detect ES1868, ES1869 or ES1878 + * if successful we're ready + * - try to detect ES1888, ES1887 or ES1788 + * if successful we're ready + * - Dunno. Must be 1688. Will do in general + * + * About RECLEV support: + * + * The existing ES1688 support didn't take care of the ES1688+ recording + * levels very well. Whenever a device was selected (recmask) for recording + * it's recording level was loud, and it couldn't be changed. The fact that + * internal register 0xb4 could take care of RECLEV, didn't work meaning until + * it's value was restored every time the chip was reset; this reset the + * value of 0xb4 too. I guess that's what 4front also had (have?) trouble with. + * + * About ES1887 support: + * + * The ES1887 has separate registers to control the recording levels, for all + * inputs. The ES1887 specific software makes these levels the same as their + * corresponding playback levels, unless recmask says they aren't recorded. In + * the latter case the recording volumes are 0. + * Now recording levels of inputs can be controlled, by changing the playback + * levels. Futhermore several devices can be recorded together (which is not + * possible with the ES1688. + * Besides the separate recording level control for each input, the common + * recordig level can also be controlled by RECLEV as described above. + * + * Not only ES1887 have this recording mixer. I know the following from the + * documentation: + * ES688 no + * ES1688 no + * ES1868 no + * ES1869 yes + * ES1878 no + * ES1879 yes + * ES1888 no/yes Contradicting documentation; most recent: yes + * ES1946 yes This is a PCI chip; not handled by this driver + */ + +#include +#include +#include + +#include "sound_config.h" +#include "sb_mixer.h" +#include "sb.h" + +#include "sb_ess.h" + +#define ESSTYPE_LIKE20 -1 /* Mimic 2.0 behaviour */ +#define ESSTYPE_DETECT 0 /* Mimic 2.0 behaviour */ + +#define SUBMDL_ES1788 0x10 /* Subtype ES1788 for specific handling */ +#define SUBMDL_ES1868 0x11 /* Subtype ES1868 for specific handling */ +#define SUBMDL_ES1869 0x12 /* Subtype ES1869 for specific handling */ +#define SUBMDL_ES1878 0x13 /* Subtype ES1878 for specific handling */ +#define SUBMDL_ES1879 0x16 /* ES1879 was initially forgotten */ +#define SUBMDL_ES1887 0x14 /* Subtype ES1887 for specific handling */ +#define SUBMDL_ES1888 0x15 /* Subtype ES1888 for specific handling */ + +#define SB_CAP_ES18XX_RATE 0x100 + +#define ES1688_CLOCK1 795444 /* 128 - div */ +#define ES1688_CLOCK2 397722 /* 256 - div */ +#define ES18XX_CLOCK1 793800 /* 128 - div */ +#define ES18XX_CLOCK2 768000 /* 256 - div */ + +#ifdef FKS_LOGGING +static void ess_show_mixerregs (sb_devc *devc); +#endif +static int ess_read (sb_devc * devc, unsigned char reg); +static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data); +static void ess_chgmixer + (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val); + +/**************************************************************************** + * * + * ESS audio * + * * + ****************************************************************************/ + +struct ess_command {short cmd; short data;}; + +/* + * Commands for initializing Audio 1 for input (record) + */ +static struct ess_command ess_i08m[] = /* input 8 bit mono */ + { {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} }; +static struct ess_command ess_i16m[] = /* input 16 bit mono */ + { {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} }; +static struct ess_command ess_i08s[] = /* input 8 bit stereo */ + { {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} }; +static struct ess_command ess_i16s[] = /* input 16 bit stereo */ + { {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} }; + +static struct ess_command *ess_inp_cmds[] = + { ess_i08m, ess_i16m, ess_i08s, ess_i16s }; + + +/* + * Commands for initializing Audio 1 for output (playback) + */ +static struct ess_command ess_o08m[] = /* output 8 bit mono */ + { {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} }; +static struct ess_command ess_o16m[] = /* output 16 bit mono */ + { {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} }; +static struct ess_command ess_o08s[] = /* output 8 bit stereo */ + { {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} }; +static struct ess_command ess_o16s[] = /* output 16 bit stereo */ + { {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} }; + +static struct ess_command *ess_out_cmds[] = + { ess_o08m, ess_o16m, ess_o08s, ess_o16s }; + +static void ess_exec_commands + (sb_devc *devc, struct ess_command *cmdtab[]) +{ + struct ess_command *cmd; + + cmd = cmdtab [ ((devc->channels != 1) << 1) + (devc->bits != AFMT_U8) ]; + + while (cmd->cmd != -1) { + ess_write (devc, cmd->cmd, cmd->data); + cmd++; + } +} + +static void ess_change + (sb_devc *devc, unsigned int reg, unsigned int mask, unsigned int val) +{ + int value; + + value = ess_read (devc, reg); + value = (value & ~mask) | (val & mask); + ess_write (devc, reg, value); +} + +static void ess_set_output_parms + (int dev, unsigned long buf, int nr_bytes, int intrflag) +{ + sb_devc *devc = audio_devs[dev]->devc; + + if (devc->duplex) { + devc->trg_buf_16 = buf; + devc->trg_bytes_16 = nr_bytes; + devc->trg_intrflag_16 = intrflag; + devc->irq_mode_16 = IMODE_OUTPUT; + } else { + devc->trg_buf = buf; + devc->trg_bytes = nr_bytes; + devc->trg_intrflag = intrflag; + devc->irq_mode = IMODE_OUTPUT; + } +} + +static void ess_set_input_parms + (int dev, unsigned long buf, int count, int intrflag) +{ + sb_devc *devc = audio_devs[dev]->devc; + + devc->trg_buf = buf; + devc->trg_bytes = count; + devc->trg_intrflag = intrflag; + devc->irq_mode = IMODE_INPUT; +} + +static int ess_calc_div (int clock, int revert, int *speedp, int *diffp) +{ + int divider; + int speed, diff; + int retval; + + speed = *speedp; + divider = (clock + speed / 2) / speed; + retval = revert - divider; + if (retval > revert - 1) { + retval = revert - 1; + divider = revert - retval; + } + /* This line is suggested. Must be wrong I think + *speedp = (clock + divider / 2) / divider; + So I chose the next one */ + + *speedp = clock / divider; + diff = speed - *speedp; + if (diff < 0) diff =-diff; + *diffp = diff; + + return retval; +} + +static int ess_calc_best_speed + (int clock1, int rev1, int clock2, int rev2, int *divp, int *speedp) +{ + int speed1 = *speedp, speed2 = *speedp; + int div1, div2; + int diff1, diff2; + int retval; + + div1 = ess_calc_div (clock1, rev1, &speed1, &diff1); + div2 = ess_calc_div (clock2, rev2, &speed2, &diff2); + + if (diff1 < diff2) { + *divp = div1; + *speedp = speed1; + retval = 1; + } else { + /* *divp = div2; */ + *divp = 0x80 | div2; + *speedp = speed2; + retval = 2; + } + + return retval; +} + +/* + * Depending on the audiochannel ESS devices can + * have different clock settings. These are made consistent for duplex + * however. + * callers of ess_speed only do an audionum suggestion, which means + * input suggests 1, output suggests 2. This suggestion is only true + * however when doing duplex. + */ +static void ess_common_speed (sb_devc *devc, int *speedp, int *divp) +{ + int diff = 0, div; + + if (devc->duplex) { + /* + * The 0x80 is important for the first audio channel + */ + if (devc->submodel == SUBMDL_ES1888) { + div = 0x80 | ess_calc_div (795500, 256, speedp, &diff); + } else { + div = 0x80 | ess_calc_div (795500, 128, speedp, &diff); + } + } else if(devc->caps & SB_CAP_ES18XX_RATE) { + if (devc->submodel == SUBMDL_ES1888) { + ess_calc_best_speed(397700, 128, 795500, 256, + &div, speedp); + } else { + ess_calc_best_speed(ES18XX_CLOCK1, 128, ES18XX_CLOCK2, 256, + &div, speedp); + } + } else { + if (*speedp > 22000) { + div = 0x80 | ess_calc_div (ES1688_CLOCK1, 256, speedp, &diff); + } else { + div = 0x00 | ess_calc_div (ES1688_CLOCK2, 128, speedp, &diff); + } + } + *divp = div; +} + +static void ess_speed (sb_devc *devc, int audionum) +{ + int speed; + int div, div2; + + ess_common_speed (devc, &(devc->speed), &div); + +#ifdef FKS_REG_LOGGING +printk (KERN_INFO "FKS: ess_speed (%d) b speed = %d, div=%x\n", audionum, devc->speed, div); +#endif + + /* Set filter roll-off to 90% of speed/2 */ + speed = (devc->speed * 9) / 20; + + div2 = 256 - 7160000 / (speed * 82); + + if (!devc->duplex) audionum = 1; + + if (audionum == 1) { + /* Change behaviour of register A1 * + sb_chg_mixer(devc, 0x71, 0x20, 0x20) + * For ES1869 only??? */ + ess_write (devc, 0xa1, div); + ess_write (devc, 0xa2, div2); + } else { + ess_setmixer (devc, 0x70, div); + /* + * FKS: fascinating: 0x72 doesn't seem to work. + */ + ess_write (devc, 0xa2, div2); + ess_setmixer (devc, 0x72, div2); + } +} + +static int ess_audio_prepare_for_input(int dev, int bsize, int bcount) +{ + sb_devc *devc = audio_devs[dev]->devc; + + ess_speed(devc, 1); + + sb_dsp_command(devc, DSP_CMD_SPKOFF); + + ess_write (devc, 0xb8, 0x0e); /* Auto init DMA mode */ + ess_change (devc, 0xa8, 0x03, 3 - devc->channels); /* Mono/stereo */ + ess_write (devc, 0xb9, 2); /* Demand mode (4 bytes/DMA request) */ + + ess_exec_commands (devc, ess_inp_cmds); + + ess_change (devc, 0xb1, 0xf0, 0x50); + ess_change (devc, 0xb2, 0xf0, 0x50); + + devc->trigger_bits = 0; + return 0; +} + +static int ess_audio_prepare_for_output_audio1 (int dev, int bsize, int bcount) +{ + sb_devc *devc = audio_devs[dev]->devc; + + sb_dsp_reset(devc); + ess_speed(devc, 1); + ess_write (devc, 0xb8, 4); /* Auto init DMA mode */ + ess_change (devc, 0xa8, 0x03, 3 - devc->channels); /* Mono/stereo */ + ess_write (devc, 0xb9, 2); /* Demand mode (4 bytes/request) */ + + ess_exec_commands (devc, ess_out_cmds); + + ess_change (devc, 0xb1, 0xf0, 0x50); /* Enable DMA */ + ess_change (devc, 0xb2, 0xf0, 0x50); /* Enable IRQ */ + + sb_dsp_command(devc, DSP_CMD_SPKON); /* There be sound! */ + + devc->trigger_bits = 0; + return 0; +} + +static int ess_audio_prepare_for_output_audio2 (int dev, int bsize, int bcount) +{ + sb_devc *devc = audio_devs[dev]->devc; + unsigned char bits; + +/* FKS: qqq + sb_dsp_reset(devc); +*/ + + /* + * Auto-Initialize: + * DMA mode + demand mode (8 bytes/request, yes I want it all!) + * But leave 16-bit DMA bit untouched! + */ + ess_chgmixer (devc, 0x78, 0xd0, 0xd0); + + ess_speed(devc, 2); + + /* bits 4:3 on ES1887 represent recording source. Keep them! */ + bits = ess_getmixer (devc, 0x7a) & 0x18; + + /* Set stereo/mono */ + if (devc->channels != 1) bits |= 0x02; + + /* Init DACs; UNSIGNED mode for 8 bit; SIGNED mode for 16 bit */ + if (devc->bits != AFMT_U8) bits |= 0x05; /* 16 bit */ + + /* Enable DMA, IRQ will be shared (hopefully)*/ + bits |= 0x60; + + ess_setmixer (devc, 0x7a, bits); + + ess_mixer_reload (devc, SOUND_MIXER_PCM); /* There be sound! */ + + devc->trigger_bits = 0; + return 0; +} + +static int ess_audio_prepare_for_output(int dev, int bsize, int bcount) +{ + sb_devc *devc = audio_devs[dev]->devc; + +#ifdef FKS_REG_LOGGING +printk(KERN_INFO "ess_audio_prepare_for_output: dma_out=%d,dma_in=%d\n" +, audio_devs[dev]->dmap_out->dma, audio_devs[dev]->dmap_in->dma); +#endif + + if (devc->duplex) { + return ess_audio_prepare_for_output_audio2 (dev, bsize, bcount); + } else { + return ess_audio_prepare_for_output_audio1 (dev, bsize, bcount); + } +} + +static void ess_audio_halt_xfer(int dev) +{ + unsigned long flags; + sb_devc *devc = audio_devs[dev]->devc; + + spin_lock_irqsave(&devc->lock, flags); + sb_dsp_reset(devc); + spin_unlock_irqrestore(&devc->lock, flags); + + /* + * Audio 2 may still be operational! Creates awful sounds! + */ + if (devc->duplex) ess_chgmixer(devc, 0x78, 0x03, 0x00); +} + +static void ess_audio_start_input + (int dev, unsigned long buf, int nr_bytes, int intrflag) +{ + int count = nr_bytes; + sb_devc *devc = audio_devs[dev]->devc; + short c = -nr_bytes; + + /* + * Start a DMA input to the buffer pointed by dmaqtail + */ + + if (audio_devs[dev]->dmap_in->dma > 3) count >>= 1; + count--; + + devc->irq_mode = IMODE_INPUT; + + ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff)); + ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff)); + + ess_change (devc, 0xb8, 0x0f, 0x0f); /* Go */ + devc->intr_active = 1; +} + +static void ess_audio_output_block_audio1 + (int dev, unsigned long buf, int nr_bytes, int intrflag) +{ + int count = nr_bytes; + sb_devc *devc = audio_devs[dev]->devc; + short c = -nr_bytes; + + if (audio_devs[dev]->dmap_out->dma > 3) + count >>= 1; + count--; + + devc->irq_mode = IMODE_OUTPUT; + + ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff)); + ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff)); + + ess_change (devc, 0xb8, 0x05, 0x05); /* Go */ + devc->intr_active = 1; +} + +static void ess_audio_output_block_audio2 + (int dev, unsigned long buf, int nr_bytes, int intrflag) +{ + int count = nr_bytes; + sb_devc *devc = audio_devs[dev]->devc; + short c = -nr_bytes; + + if (audio_devs[dev]->dmap_out->dma > 3) count >>= 1; + count--; + + ess_setmixer (devc, 0x74, (unsigned char) ((unsigned short) c & 0xff)); + ess_setmixer (devc, 0x76, (unsigned char) (((unsigned short) c >> 8) & 0xff)); + ess_chgmixer (devc, 0x78, 0x03, 0x03); /* Go */ + + devc->irq_mode_16 = IMODE_OUTPUT; + devc->intr_active_16 = 1; +} + +static void ess_audio_output_block + (int dev, unsigned long buf, int nr_bytes, int intrflag) +{ + sb_devc *devc = audio_devs[dev]->devc; + + if (devc->duplex) { + ess_audio_output_block_audio2 (dev, buf, nr_bytes, intrflag); + } else { + ess_audio_output_block_audio1 (dev, buf, nr_bytes, intrflag); + } +} + +/* + * FKS: the if-statements for both bits and bits_16 are quite alike. + * Combine this... + */ +static void ess_audio_trigger(int dev, int bits) +{ + sb_devc *devc = audio_devs[dev]->devc; + + int bits_16 = bits & devc->irq_mode_16; + bits &= devc->irq_mode; + + if (!bits && !bits_16) { + /* FKS oh oh.... wrong?? for dma 16? */ + sb_dsp_command(devc, 0xd0); /* Halt DMA */ + } + + if (bits) { + switch (devc->irq_mode) + { + case IMODE_INPUT: + ess_audio_start_input(dev, devc->trg_buf, devc->trg_bytes, + devc->trg_intrflag); + break; + + case IMODE_OUTPUT: + ess_audio_output_block(dev, devc->trg_buf, devc->trg_bytes, + devc->trg_intrflag); + break; + } + } + + if (bits_16) { + switch (devc->irq_mode_16) { + case IMODE_INPUT: + ess_audio_start_input(dev, devc->trg_buf_16, devc->trg_bytes_16, + devc->trg_intrflag_16); + break; + + case IMODE_OUTPUT: + ess_audio_output_block(dev, devc->trg_buf_16, devc->trg_bytes_16, + devc->trg_intrflag_16); + break; + } + } + + devc->trigger_bits = bits | bits_16; +} + +static int ess_audio_set_speed(int dev, int speed) +{ + sb_devc *devc = audio_devs[dev]->devc; + int minspeed, maxspeed, dummydiv; + + if (speed > 0) { + minspeed = (devc->duplex ? 6215 : 5000 ); + maxspeed = (devc->duplex ? 44100 : 48000); + if (speed < minspeed) speed = minspeed; + if (speed > maxspeed) speed = maxspeed; + + ess_common_speed (devc, &speed, &dummydiv); + + devc->speed = speed; + } + return devc->speed; +} + +/* + * FKS: This is a one-on-one copy of sb1_audio_set_bits + */ +static unsigned int ess_audio_set_bits(int dev, unsigned int bits) +{ + sb_devc *devc = audio_devs[dev]->devc; + + if (bits != 0) { + if (bits == AFMT_U8 || bits == AFMT_S16_LE) { + devc->bits = bits; + } else { + devc->bits = AFMT_U8; + } + } + + return devc->bits; +} + +/* + * FKS: This is a one-on-one copy of sbpro_audio_set_channels + * (*) Modified it!! + */ +static short ess_audio_set_channels(int dev, short channels) +{ + sb_devc *devc = audio_devs[dev]->devc; + + if (channels == 1 || channels == 2) devc->channels = channels; + + return devc->channels; +} + +static struct audio_driver ess_audio_driver = /* ESS ES688/1688 */ +{ + .owner = THIS_MODULE, + .open = sb_audio_open, + .close = sb_audio_close, + .output_block = ess_set_output_parms, + .start_input = ess_set_input_parms, + .prepare_for_input = ess_audio_prepare_for_input, + .prepare_for_output = ess_audio_prepare_for_output, + .halt_io = ess_audio_halt_xfer, + .trigger = ess_audio_trigger, + .set_speed = ess_audio_set_speed, + .set_bits = ess_audio_set_bits, + .set_channels = ess_audio_set_channels +}; + +/* + * ess_audio_init must be called from sb_audio_init + */ +struct audio_driver *ess_audio_init + (sb_devc *devc, int *audio_flags, int *format_mask) +{ + *audio_flags = DMA_AUTOMODE; + *format_mask |= AFMT_S16_LE; + + if (devc->duplex) { + int tmp_dma; + /* + * sb_audio_init thinks dma8 is for playback and + * dma16 is for record. Not now! So swap them. + */ + tmp_dma = devc->dma16; + devc->dma16 = devc->dma8; + devc->dma8 = tmp_dma; + + *audio_flags |= DMA_DUPLEX; + } + + return &ess_audio_driver; +} + +/**************************************************************************** + * * + * ESS common * + * * + ****************************************************************************/ +static void ess_handle_channel + (char *channel, int dev, int intr_active, unsigned char flag, int irq_mode) +{ + if (!intr_active || !flag) return; +#ifdef FKS_REG_LOGGING +printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode); +#endif + switch (irq_mode) { + case IMODE_OUTPUT: + DMAbuf_outputintr (dev, 1); + break; + + case IMODE_INPUT: + DMAbuf_inputintr (dev); + break; + + case IMODE_INIT: + break; + + default:; + /* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */ + } +} + +/* + * FKS: TODO!!! Finish this! + * + * I think midi stuff uses uart401, without interrupts. + * So IMODE_MIDI isn't a value for devc->irq_mode. + */ +void ess_intr (sb_devc *devc) +{ + int status; + unsigned char src; + + if (devc->submodel == SUBMDL_ES1887) { + src = ess_getmixer (devc, 0x7f) >> 4; + } else { + src = 0xff; + } + +#ifdef FKS_REG_LOGGING +printk(KERN_INFO "FKS: sbintr src=%x\n",(int)src); +#endif + ess_handle_channel + ( "Audio 1" + , devc->dev, devc->intr_active , src & 0x01, devc->irq_mode ); + ess_handle_channel + ( "Audio 2" + , devc->dev, devc->intr_active_16, src & 0x02, devc->irq_mode_16); + /* + * Acknowledge interrupts + */ + if (devc->submodel == SUBMDL_ES1887 && (src & 0x02)) { + ess_chgmixer (devc, 0x7a, 0x80, 0x00); + } + + if (src & 0x01) { + status = inb(DSP_DATA_AVAIL); + } +} + +static void ess_extended (sb_devc * devc) +{ + /* Enable extended mode */ + + sb_dsp_command(devc, 0xc6); +} + +static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data) +{ +#ifdef FKS_REG_LOGGING +printk(KERN_INFO "FKS: write reg %x: %x\n", reg, data); +#endif + /* Write a byte to an extended mode register of ES1688 */ + + if (!sb_dsp_command(devc, reg)) + return 0; + + return sb_dsp_command(devc, data); +} + +static int ess_read (sb_devc * devc, unsigned char reg) +{ + /* Read a byte from an extended mode register of ES1688 */ + + /* Read register command */ + if (!sb_dsp_command(devc, 0xc0)) return -1; + + if (!sb_dsp_command(devc, reg )) return -1; + + return sb_dsp_get_byte(devc); +} + +int ess_dsp_reset(sb_devc * devc) +{ + int loopc; + +#ifdef FKS_REG_LOGGING +printk(KERN_INFO "FKS: ess_dsp_reset 1\n"); +ess_show_mixerregs (devc); +#endif + + DEB(printk("Entered ess_dsp_reset()\n")); + + outb(3, DSP_RESET); /* Reset FIFO too */ + + udelay(10); + outb(0, DSP_RESET); + udelay(30); + + for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++); + + if (inb(DSP_READ) != 0xAA) { + DDB(printk("sb: No response to RESET\n")); + return 0; /* Sorry */ + } + ess_extended (devc); + + DEB(printk("sb_dsp_reset() OK\n")); + +#ifdef FKS_LOGGING +printk(KERN_INFO "FKS: dsp_reset 2\n"); +ess_show_mixerregs (devc); +#endif + + return 1; +} + +static int ess_irq_bits (int irq) +{ + switch (irq) { + case 2: + case 9: + return 0; + + case 5: + return 1; + + case 7: + return 2; + + case 10: + return 3; + + default: + printk(KERN_ERR "ESS1688: Invalid IRQ %d\n", irq); + return -1; + } +} + +/* + * Set IRQ configuration register for all ESS models + */ +static int ess_common_set_irq_hw (sb_devc * devc) +{ + int irq_bits; + + if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return 0; + + if (!ess_write (devc, 0xb1, 0x50 | (irq_bits << 2))) { + printk(KERN_ERR "ES1688: Failed to write to IRQ config register\n"); + return 0; + } + return 1; +} + +/* + * I wanna use modern ES1887 mixer irq handling. Funny is the + * fact that my BIOS wants the same. But suppose someone's BIOS + * doesn't do this! + * This is independent of duplex. If there's a 1887 this will + * prevent it from going into 1888 mode. + */ +static void ess_es1887_set_irq_hw (sb_devc * devc) +{ + int irq_bits; + + if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return; + + ess_chgmixer (devc, 0x7f, 0x0f, 0x01 | ((irq_bits + 1) << 1)); +} + +static int ess_set_irq_hw (sb_devc * devc) +{ + if (devc->submodel == SUBMDL_ES1887) ess_es1887_set_irq_hw (devc); + + return ess_common_set_irq_hw (devc); +} + +#ifdef FKS_TEST + +/* + * FKS_test: + * for ES1887: 00, 18, non wr bits: 0001 1000 + * for ES1868: 00, b8, non wr bits: 1011 1000 + * for ES1888: 00, f8, non wr bits: 1111 1000 + * for ES1688: 00, f8, non wr bits: 1111 1000 + * + ES968 + */ + +static void FKS_test (sb_devc * devc) +{ + int val1, val2; + val1 = ess_getmixer (devc, 0x64); + ess_setmixer (devc, 0x64, ~val1); + val2 = ess_getmixer (devc, 0x64) ^ ~val1; + ess_setmixer (devc, 0x64, val1); + val1 ^= ess_getmixer (devc, 0x64); +printk (KERN_INFO "FKS: FKS_test %02x, %02x\n", (val1 & 0x0ff), (val2 & 0x0ff)); +}; +#endif + +static unsigned int ess_identify (sb_devc * devc) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&devc->lock, flags); + outb(((unsigned char) (0x40 & 0xff)), MIXER_ADDR); + + udelay(20); + val = inb(MIXER_DATA) << 8; + udelay(20); + val |= inb(MIXER_DATA); + udelay(20); + spin_unlock_irqrestore(&devc->lock, flags); + + return val; +} + +/* + * ESS technology describes a detection scheme in their docs. It involves + * fiddling with the bits in certain mixer registers. ess_probe is supposed + * to help. + * + * FKS: tracing shows ess_probe writes wrong value to 0x64. Bit 3 reads 1, but + * should be written 0 only. Check this. + */ +static int ess_probe (sb_devc * devc, int reg, int xorval) +{ + int val1, val2, val3; + + val1 = ess_getmixer (devc, reg); + val2 = val1 ^ xorval; + ess_setmixer (devc, reg, val2); + val3 = ess_getmixer (devc, reg); + ess_setmixer (devc, reg, val1); + + return (val2 == val3); +} + +int ess_init(sb_devc * devc, struct address_info *hw_config) +{ + unsigned char cfg; + int ess_major = 0, ess_minor = 0; + int i; + static char name[100], modelname[10]; + + /* + * Try to detect ESS chips. + */ + + sb_dsp_command(devc, 0xe7); /* Return identification */ + + for (i = 1000; i; i--) { + if (inb(DSP_DATA_AVAIL) & 0x80) { + if (ess_major == 0) { + ess_major = inb(DSP_READ); + } else { + ess_minor = inb(DSP_READ); + break; + } + } + } + + if (ess_major == 0) return 0; + + if (ess_major == 0x48 && (ess_minor & 0xf0) == 0x80) { + sprintf(name, "ESS ES488 AudioDrive (rev %d)", + ess_minor & 0x0f); + hw_config->name = name; + devc->model = MDL_SBPRO; + return 1; + } + + /* + * This the detection heuristic of ESS technology, though somewhat + * changed to actually make it work. + * This results in the following detection steps: + * - distinct between ES688 and ES1688+ (as always done in this driver) + * if ES688 we're ready + * - try to detect ES1868, ES1869 or ES1878 (ess_identify) + * if successful we're ready + * - try to detect ES1888, ES1887 or ES1788 (aim: detect ES1887) + * if successful we're ready + * - Dunno. Must be 1688. Will do in general + * + * This is the most BETA part of the software: Will the detection + * always work? + */ + devc->model = MDL_ESS; + devc->submodel = ess_minor & 0x0f; + + if (ess_major == 0x68 && (ess_minor & 0xf0) == 0x80) { + char *chip = NULL; + int submodel = -1; + + switch (devc->sbmo.esstype) { + case ESSTYPE_DETECT: + case ESSTYPE_LIKE20: + break; + case 688: + submodel = 0x00; + break; + case 1688: + submodel = 0x08; + break; + case 1868: + submodel = SUBMDL_ES1868; + break; + case 1869: + submodel = SUBMDL_ES1869; + break; + case 1788: + submodel = SUBMDL_ES1788; + break; + case 1878: + submodel = SUBMDL_ES1878; + break; + case 1879: + submodel = SUBMDL_ES1879; + break; + case 1887: + submodel = SUBMDL_ES1887; + break; + case 1888: + submodel = SUBMDL_ES1888; + break; + default: + printk (KERN_ERR "Invalid esstype=%d specified\n", devc->sbmo.esstype); + return 0; + }; + if (submodel != -1) { + devc->submodel = submodel; + sprintf (modelname, "ES%d", devc->sbmo.esstype); + chip = modelname; + }; + if (chip == NULL && (ess_minor & 0x0f) < 8) { + chip = "ES688"; + }; +#ifdef FKS_TEST +FKS_test (devc); +#endif + /* + * If Nothing detected yet, and we want 2.0 behaviour... + * Then let's assume it's ES1688. + */ + if (chip == NULL && devc->sbmo.esstype == ESSTYPE_LIKE20) { + chip = "ES1688"; + }; + + if (chip == NULL) { + int type; + + type = ess_identify (devc); + + switch (type) { + case 0x1868: + chip = "ES1868"; + devc->submodel = SUBMDL_ES1868; + break; + case 0x1869: + chip = "ES1869"; + devc->submodel = SUBMDL_ES1869; + break; + case 0x1878: + chip = "ES1878"; + devc->submodel = SUBMDL_ES1878; + break; + case 0x1879: + chip = "ES1879"; + devc->submodel = SUBMDL_ES1879; + break; + default: + if ((type & 0x00ff) != ((type >> 8) & 0x00ff)) { + printk ("ess_init: Unrecognized %04x\n", type); + } + }; + }; +#if 0 + /* + * this one failed: + * the probing of bit 4 is another thought: from ES1788 and up, all + * chips seem to have hardware volume control. Bit 4 is readonly to + * check if a hardware volume interrupt has fired. + * Cause ES688/ES1688 don't have this feature, bit 4 might be writeable + * for these chips. + */ + if (chip == NULL && !ess_probe(devc, 0x64, (1 << 4))) { +#endif + /* + * the probing of bit 2 is my idea. The ES1887 docs want me to probe + * bit 3. This results in ES1688 being detected as ES1788. + * Bit 2 is for "Enable HWV IRQE", but as ES(1)688 chips don't have + * HardWare Volume, I think they don't have this IRQE. + */ + if (chip == NULL && ess_probe(devc, 0x64, (1 << 2))) { + if (ess_probe (devc, 0x70, 0x7f)) { + if (ess_probe (devc, 0x64, (1 << 5))) { + chip = "ES1887"; + devc->submodel = SUBMDL_ES1887; + } else { + chip = "ES1888"; + devc->submodel = SUBMDL_ES1888; + } + } else { + chip = "ES1788"; + devc->submodel = SUBMDL_ES1788; + } + }; + if (chip == NULL) { + chip = "ES1688"; + }; + + printk ( KERN_INFO "ESS chip %s %s%s\n" + , chip + , ( devc->sbmo.esstype == ESSTYPE_DETECT || devc->sbmo.esstype == ESSTYPE_LIKE20 + ? "detected" + : "specified" + ) + , ( devc->sbmo.esstype == ESSTYPE_LIKE20 + ? " (kernel 2.0 compatible)" + : "" + ) + ); + + sprintf(name,"ESS %s AudioDrive (rev %d)", chip, ess_minor & 0x0f); + } else { + strcpy(name, "Jazz16"); + } + + /* AAS: info stolen from ALSA: these boards have different clocks */ + switch(devc->submodel) { +/* APPARENTLY NOT 1869 AND 1887 + case SUBMDL_ES1869: + case SUBMDL_ES1887: +*/ + case SUBMDL_ES1888: + devc->caps |= SB_CAP_ES18XX_RATE; + break; + } + + hw_config->name = name; + /* FKS: sb_dsp_reset to enable extended mode???? */ + sb_dsp_reset(devc); /* Turn on extended mode */ + + /* + * Enable joystick and OPL3 + */ + cfg = ess_getmixer (devc, 0x40); + ess_setmixer (devc, 0x40, cfg | 0x03); + if (devc->submodel >= 8) { /* ES1688 */ + devc->caps |= SB_NO_MIDI; /* ES1688 uses MPU401 MIDI mode */ + } + sb_dsp_reset (devc); + + /* + * This is important! If it's not done, the IRQ probe in sb_dsp_init + * may fail. + */ + return ess_set_irq_hw (devc); +} + +static int ess_set_dma_hw(sb_devc * devc) +{ + unsigned char cfg, dma_bits = 0, dma16_bits; + int dma; + +#ifdef FKS_LOGGING +printk(KERN_INFO "ess_set_dma_hw: dma8=%d,dma16=%d,dup=%d\n" +, devc->dma8, devc->dma16, devc->duplex); +#endif + + /* + * FKS: It seems as if this duplex flag isn't set yet. Check it. + */ + dma = devc->dma8; + + if (dma > 3 || dma < 0 || dma == 2) { + dma_bits = 0; + printk(KERN_ERR "ESS1688: Invalid DMA8 %d\n", dma); + return 0; + } else { + /* Extended mode DMA enable */ + cfg = 0x50; + + if (dma == 3) { + dma_bits = 3; + } else { + dma_bits = dma + 1; + } + } + + if (!ess_write (devc, 0xb2, cfg | (dma_bits << 2))) { + printk(KERN_ERR "ESS1688: Failed to write to DMA config register\n"); + return 0; + } + + if (devc->duplex) { + dma = devc->dma16; + dma16_bits = 0; + + if (dma >= 0) { + switch (dma) { + case 0: + dma_bits = 0x04; + break; + case 1: + dma_bits = 0x05; + break; + case 3: + dma_bits = 0x06; + break; + case 5: + dma_bits = 0x07; + dma16_bits = 0x20; + break; + default: + printk(KERN_ERR "ESS1887: Invalid DMA16 %d\n", dma); + return 0; + }; + ess_chgmixer (devc, 0x78, 0x20, dma16_bits); + ess_chgmixer (devc, 0x7d, 0x07, dma_bits); + } + } + return 1; +} + +/* + * This one is called from sb_dsp_init. + * + * Return values: + * 0: Failed + * 1: Succeeded or doesn't apply (not SUBMDL_ES1887) + */ +int ess_dsp_init (sb_devc *devc, struct address_info *hw_config) +{ + /* + * Caller also checks this, but anyway + */ + if (devc->model != MDL_ESS) { + printk (KERN_INFO "ess_dsp_init for non ESS chip\n"); + return 1; + } + /* + * This for ES1887 to run Full Duplex. Actually ES1888 + * is allowed to do so too. I have no idea yet if this + * will work for ES1888 however. + * + * For SB16 having both dma8 and dma16 means enable + * Full Duplex. Let's try this for ES1887 too + * + */ + if (devc->submodel == SUBMDL_ES1887) { + if (hw_config->dma2 != -1) { + devc->dma16 = hw_config->dma2; + } + /* + * devc->duplex initialization is put here, cause + * ess_set_dma_hw needs it. + */ + if (devc->dma8 != devc->dma16 && devc->dma16 != -1) { + devc->duplex = 1; + } + } + if (!ess_set_dma_hw (devc)) { + free_irq(devc->irq, devc); + return 0; + } + return 1; +} + +/**************************************************************************** + * * + * ESS mixer * + * * + ****************************************************************************/ + +#define ES688_RECORDING_DEVICES \ + ( SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD ) +#define ES688_MIXER_DEVICES \ + ( SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_LINE \ + | SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_VOLUME \ + | SOUND_MASK_LINE2 | SOUND_MASK_SPEAKER ) + +#define ES1688_RECORDING_DEVICES \ + ( ES688_RECORDING_DEVICES ) +#define ES1688_MIXER_DEVICES \ + ( ES688_MIXER_DEVICES | SOUND_MASK_RECLEV ) + +#define ES1887_RECORDING_DEVICES \ + ( ES1688_RECORDING_DEVICES | SOUND_MASK_LINE2 | SOUND_MASK_SYNTH) +#define ES1887_MIXER_DEVICES \ + ( ES1688_MIXER_DEVICES ) + +/* + * Mixer registers of ES1887 + * + * These registers specifically take care of recording levels. To make the + * mapping from playback devices to recording devices every recording + * devices = playback device + ES_REC_MIXER_RECDIFF + */ +#define ES_REC_MIXER_RECBASE (SOUND_MIXER_LINE3 + 1) +#define ES_REC_MIXER_RECDIFF (ES_REC_MIXER_RECBASE - SOUND_MIXER_SYNTH) + +#define ES_REC_MIXER_RECSYNTH (SOUND_MIXER_SYNTH + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECPCM (SOUND_MIXER_PCM + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECSPEAKER (SOUND_MIXER_SPEAKER + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECLINE (SOUND_MIXER_LINE + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECMIC (SOUND_MIXER_MIC + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECCD (SOUND_MIXER_CD + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECIMIX (SOUND_MIXER_IMIX + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECALTPCM (SOUND_MIXER_ALTPCM + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECRECLEV (SOUND_MIXER_RECLEV + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECIGAIN (SOUND_MIXER_IGAIN + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECOGAIN (SOUND_MIXER_OGAIN + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECLINE1 (SOUND_MIXER_LINE1 + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECLINE2 (SOUND_MIXER_LINE2 + ES_REC_MIXER_RECDIFF) +#define ES_REC_MIXER_RECLINE3 (SOUND_MIXER_LINE3 + ES_REC_MIXER_RECDIFF) + +static mixer_tab es688_mix = { +MIX_ENT(SOUND_MIXER_VOLUME, 0x32, 7, 4, 0x32, 3, 4), +MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), +MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), +MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), +MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), +MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), +MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_RECLEV, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), +MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0) +}; + +/* + * The ES1688 specifics... hopefully correct... + * - 6 bit master volume + * I was wrong, ES1888 docs say ES1688 didn't have it. + * - RECLEV control + * These may apply to ES688 too. I have no idea. + */ +static mixer_tab es1688_mix = { +MIX_ENT(SOUND_MIXER_VOLUME, 0x32, 7, 4, 0x32, 3, 4), +MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), +MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), +MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), +MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), +MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), +MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), +MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), +MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0) +}; + +static mixer_tab es1688later_mix = { +MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6), +MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), +MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), +MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), +MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), +MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), +MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), +MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), +MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0) +}; + +/* + * This one is for all ESS chips with a record mixer. + * It's not used (yet) however + */ +static mixer_tab es_rec_mix = { +MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6), +MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), +MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), +MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), +MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), +MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), +MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), +MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), +MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECSYNTH, 0x6b, 7, 4, 0x6b, 3, 4), +MIX_ENT(ES_REC_MIXER_RECPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECSPEAKER, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECLINE, 0x6e, 7, 4, 0x6e, 3, 4), +MIX_ENT(ES_REC_MIXER_RECMIC, 0x68, 7, 4, 0x68, 3, 4), +MIX_ENT(ES_REC_MIXER_RECCD, 0x6a, 7, 4, 0x6a, 3, 4), +MIX_ENT(ES_REC_MIXER_RECIMIX, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECALTPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECRECLEV, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECIGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECOGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECLINE1, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECLINE2, 0x6c, 7, 4, 0x6c, 3, 4), +MIX_ENT(ES_REC_MIXER_RECLINE3, 0x00, 0, 0, 0x00, 0, 0) +}; + +/* + * This one is for ES1887. It's little different from es_rec_mix: it + * has 0x7c for PCM playback level. This is because ES1887 uses + * Audio 2 for playback. + */ +static mixer_tab es1887_mix = { +MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6), +MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), +MIX_ENT(SOUND_MIXER_PCM, 0x7c, 7, 4, 0x7c, 3, 4), +MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), +MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), +MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), +MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), +MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), +MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECSYNTH, 0x6b, 7, 4, 0x6b, 3, 4), +MIX_ENT(ES_REC_MIXER_RECPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECSPEAKER, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECLINE, 0x6e, 7, 4, 0x6e, 3, 4), +MIX_ENT(ES_REC_MIXER_RECMIC, 0x68, 7, 4, 0x68, 3, 4), +MIX_ENT(ES_REC_MIXER_RECCD, 0x6a, 7, 4, 0x6a, 3, 4), +MIX_ENT(ES_REC_MIXER_RECIMIX, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECALTPCM, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECRECLEV, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECIGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECOGAIN, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECLINE1, 0x00, 0, 0, 0x00, 0, 0), +MIX_ENT(ES_REC_MIXER_RECLINE2, 0x6c, 7, 4, 0x6c, 3, 4), +MIX_ENT(ES_REC_MIXER_RECLINE3, 0x00, 0, 0, 0x00, 0, 0) +}; + +static int ess_has_rec_mixer (int submodel) +{ + switch (submodel) { + case SUBMDL_ES1887: + return 1; + default: + return 0; + }; +}; + +#ifdef FKS_LOGGING +static int ess_mixer_mon_regs[] + = { 0x70, 0x71, 0x72, 0x74, 0x76, 0x78, 0x7a, 0x7c, 0x7d, 0x7f + , 0xa1, 0xa2, 0xa4, 0xa5, 0xa8, 0xa9 + , 0xb1, 0xb2, 0xb4, 0xb5, 0xb6, 0xb7, 0xb9 + , 0x00}; + +static void ess_show_mixerregs (sb_devc *devc) +{ + int *mp = ess_mixer_mon_regs; + +return; + + while (*mp != 0) { + printk (KERN_INFO "res (%x)=%x\n", *mp, (int)(ess_getmixer (devc, *mp))); + mp++; + } +} +#endif + +void ess_setmixer (sb_devc * devc, unsigned int port, unsigned int value) +{ + unsigned long flags; + +#ifdef FKS_LOGGING +printk(KERN_INFO "FKS: write mixer %x: %x\n", port, value); +#endif + + spin_lock_irqsave(&devc->lock, flags); + if (port >= 0xa0) { + ess_write (devc, port, value); + } else { + outb(((unsigned char) (port & 0xff)), MIXER_ADDR); + + udelay(20); + outb(((unsigned char) (value & 0xff)), MIXER_DATA); + udelay(20); + }; + spin_unlock_irqrestore(&devc->lock, flags); +} + +unsigned int ess_getmixer (sb_devc * devc, unsigned int port) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&devc->lock, flags); + + if (port >= 0xa0) { + val = ess_read (devc, port); + } else { + outb(((unsigned char) (port & 0xff)), MIXER_ADDR); + + udelay(20); + val = inb(MIXER_DATA); + udelay(20); + } + spin_unlock_irqrestore(&devc->lock, flags); + + return val; +} + +static void ess_chgmixer + (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val) +{ + int value; + + value = ess_getmixer (devc, reg); + value = (value & ~mask) | (val & mask); + ess_setmixer (devc, reg, value); +} + +/* + * ess_mixer_init must be called from sb_mixer_init + */ +void ess_mixer_init (sb_devc * devc) +{ + devc->mixer_caps = SOUND_CAP_EXCL_INPUT; + + /* + * Take care of ES1887 specifics... + */ + switch (devc->submodel) { + case SUBMDL_ES1887: + devc->supported_devices = ES1887_MIXER_DEVICES; + devc->supported_rec_devices = ES1887_RECORDING_DEVICES; +#ifdef FKS_LOGGING +printk (KERN_INFO "FKS: ess_mixer_init dup = %d\n", devc->duplex); +#endif + if (devc->duplex) { + devc->iomap = &es1887_mix; + devc->iomap_sz = ARRAY_SIZE(es1887_mix); + } else { + devc->iomap = &es_rec_mix; + devc->iomap_sz = ARRAY_SIZE(es_rec_mix); + } + break; + default: + if (devc->submodel < 8) { + devc->supported_devices = ES688_MIXER_DEVICES; + devc->supported_rec_devices = ES688_RECORDING_DEVICES; + devc->iomap = &es688_mix; + devc->iomap_sz = ARRAY_SIZE(es688_mix); + } else { + /* + * es1688 has 4 bits master vol. + * later chips have 6 bits (?) + */ + devc->supported_devices = ES1688_MIXER_DEVICES; + devc->supported_rec_devices = ES1688_RECORDING_DEVICES; + if (devc->submodel < 0x10) { + devc->iomap = &es1688_mix; + devc->iomap_sz = ARRAY_SIZE(es688_mix); + } else { + devc->iomap = &es1688later_mix; + devc->iomap_sz = ARRAY_SIZE(es1688later_mix); + } + } + } +} + +/* + * Changing playback levels at an ESS chip with record mixer means having to + * take care of recording levels of recorded inputs (devc->recmask) too! + */ +int ess_mixer_set(sb_devc *devc, int dev, int left, int right) +{ + if (ess_has_rec_mixer (devc->submodel) && (devc->recmask & (1 << dev))) { + sb_common_mixer_set (devc, dev + ES_REC_MIXER_RECDIFF, left, right); + } + return sb_common_mixer_set (devc, dev, left, right); +} + +/* + * After a sb_dsp_reset extended register 0xb4 (RECLEV) is reset too. After + * sb_dsp_reset RECLEV has to be restored. This is where ess_mixer_reload + * helps. + */ +void ess_mixer_reload (sb_devc *devc, int dev) +{ + int left, right, value; + + value = devc->levels[dev]; + left = value & 0x000000ff; + right = (value & 0x0000ff00) >> 8; + + sb_common_mixer_set(devc, dev, left, right); +} + +static int es_rec_set_recmask(sb_devc * devc, int mask) +{ + int i, i_mask, cur_mask, diff_mask; + int value, left, right; + +#ifdef FKS_LOGGING +printk (KERN_INFO "FKS: es_rec_set_recmask mask = %x\n", mask); +#endif + /* + * Changing the recmask on an ESS chip with recording mixer means: + * (1) Find the differences + * (2) For "turned-on" inputs: make the recording level the playback level + * (3) For "turned-off" inputs: make the recording level zero + */ + cur_mask = devc->recmask; + diff_mask = (cur_mask ^ mask); + + for (i = 0; i < 32; i++) { + i_mask = (1 << i); + if (diff_mask & i_mask) { /* Difference? (1) */ + if (mask & i_mask) { /* Turn it on (2) */ + value = devc->levels[i]; + left = value & 0x000000ff; + right = (value & 0x0000ff00) >> 8; + } else { /* Turn it off (3) */ + left = 0; + left = 0; + right = 0; + } + sb_common_mixer_set(devc, i + ES_REC_MIXER_RECDIFF, left, right); + } + } + return mask; +} + +int ess_set_recmask(sb_devc * devc, int *mask) +{ + /* This applies to ESS chips with record mixers only! */ + + if (ess_has_rec_mixer (devc->submodel)) { + *mask = es_rec_set_recmask (devc, *mask); + return 1; /* Applied */ + } else { + return 0; /* Not applied */ + } +} + +/* + * ess_mixer_reset must be called from sb_mixer_reset + */ +int ess_mixer_reset (sb_devc * devc) +{ + /* + * Separate actions for ESS chips with a record mixer: + */ + if (ess_has_rec_mixer (devc->submodel)) { + switch (devc->submodel) { + case SUBMDL_ES1887: + /* + * Separate actions for ES1887: + * Change registers 7a and 1c to make the record mixer the + * actual recording source. + */ + ess_chgmixer(devc, 0x7a, 0x18, 0x08); + ess_chgmixer(devc, 0x1c, 0x07, 0x07); + break; + }; + /* + * Call set_recmask for proper initialization + */ + devc->recmask = devc->supported_rec_devices; + es_rec_set_recmask(devc, 0); + devc->recmask = 0; + + return 1; /* We took care of recmask. */ + } else { + return 0; /* We didn't take care; caller do it */ + } +} + +/**************************************************************************** + * * + * ESS midi * + * * + ****************************************************************************/ + +/* + * FKS: IRQ may be shared. Hm. And if so? Then What? + */ +int ess_midi_init(sb_devc * devc, struct address_info *hw_config) +{ + unsigned char cfg, tmp; + + cfg = ess_getmixer (devc, 0x40) & 0x03; + + if (devc->submodel < 8) { + ess_setmixer (devc, 0x40, cfg | 0x03); /* Enable OPL3 & joystick */ + return 0; /* ES688 doesn't support MPU401 mode */ + } + tmp = (hw_config->io_base & 0x0f0) >> 4; + + if (tmp > 3) { + ess_setmixer (devc, 0x40, cfg); + return 0; + } + cfg |= tmp << 3; + + tmp = 1; /* MPU enabled without interrupts */ + + /* May be shared: if so the value is -ve */ + + switch (abs(hw_config->irq)) { + case 9: + tmp = 0x4; + break; + case 5: + tmp = 0x5; + break; + case 7: + tmp = 0x6; + break; + case 10: + tmp = 0x7; + break; + default: + return 0; + } + + cfg |= tmp << 5; + ess_setmixer (devc, 0x40, cfg | 0x03); + + return 1; +} + -- cgit v1.2.3