From 7084a42b965d972079201414d19a399e65b26099 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Jul 2009 22:24:27 +0100 Subject: ASoC: Add I/O control bus information to factored out cache setup While writes tend to be able to use a fairly bus independant format to do the writes reads are all bus specific. To allow us to factor out this code include the bus type as a parameter when setting up the cache. Initially just use this to factor out hw_write_t for I2C. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8510.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'sound/soc/codecs/wm8510.c') diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 7a169bff86f..4ca724ff4c6 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -564,7 +564,8 @@ static int wm8510_resume(struct platform_device *pdev) * initialise the WM8510 driver * register the mixer and dsp interfaces with the kernel */ -static int wm8510_init(struct snd_soc_device *socdev) +static int wm8510_init(struct snd_soc_device *socdev, + enum snd_soc_control_type control) { struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; @@ -580,7 +581,7 @@ static int wm8510_init(struct snd_soc_device *socdev) if (codec->reg_cache == NULL) return -ENOMEM; - ret = snd_soc_codec_set_cache_io(codec, 7, 9); + ret = snd_soc_codec_set_cache_io(codec, 7, 9, control); if (ret < 0) { printk(KERN_ERR "wm8510: failed to set cache I/O: %d\n", ret); @@ -635,7 +636,7 @@ static int wm8510_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = wm8510_init(socdev); + ret = wm8510_init(socdev, SND_SOC_I2C); if (ret < 0) pr_err("failed to initialise WM8510\n"); @@ -715,7 +716,7 @@ static int __devinit wm8510_spi_probe(struct spi_device *spi) codec->control_data = spi; - ret = wm8510_init(socdev); + ret = wm8510_init(socdev, SND_SOC_SPI); if (ret < 0) dev_err(&spi->dev, "failed to initialise WM8510\n"); @@ -784,7 +785,6 @@ static int wm8510_probe(struct platform_device *pdev) wm8510_socdev = socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - codec->hw_write = (hw_write_t)i2c_master_send; ret = wm8510_add_i2c_device(pdev, setup); } #endif -- cgit v1.2.3