From 3d3792cb455d15881144e9dfba4c67eece260a69 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 11 Sep 2009 07:50:47 +0200 Subject: ALSA: hda - Add missing model=auto entry for ALC269 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7ed47f66ddd..7702f155153 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -13370,7 +13370,8 @@ static const char *alc269_models[ALC269_MODEL_LAST] = { [ALC269_ASUS_EEEPC_P703] = "eeepc-p703", [ALC269_ASUS_EEEPC_P901] = "eeepc-p901", [ALC269_FUJITSU] = "fujitsu", - [ALC269_LIFEBOOK] = "lifebook" + [ALC269_LIFEBOOK] = "lifebook", + [ALC269_AUTO] = "auto", }; static struct snd_pci_quirk alc269_cfg_tbl[] = { -- cgit v1.2.3 From af6ee302020101bd16c7224c2b03a5fb36e17d99 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Sep 2009 15:03:12 +0200 Subject: ALSA: hda - Set default GPIO for STAC/IDT codecs IDT92HD73xx and STAC927x codecs use GPIO0 bit as EAPD on many machines. However, currently we don't set it unless the model is specified just for safety reason. But, most machines do need this bit, so this safety handling is rather annoying. This patch enables GPIO0 setup as default for them. Many HP / Dell laptops should work even without model override with this change. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index e31e53dc696..2c8a8039c75 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5016,7 +5016,7 @@ again: spec->eapd_switch = 1; break; } - if (spec->board_config > STAC_92HD73XX_REF) { + if (spec->board_config != STAC_92HD73XX_REF) { /* GPIO0 High = Enable EAPD */ spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1; spec->gpio_data = 0x01; @@ -5557,14 +5557,17 @@ static int patch_stac927x(struct hda_codec *codec) spec->dac_list = stac927x_dac_nids; spec->multiout.dac_nids = spec->dac_nids; + if (spec->board_config != STAC_D965_REF) { + /* GPIO0 High = Enable EAPD */ + spec->eapd_mask = spec->gpio_mask = 0x01; + spec->gpio_dir = spec->gpio_data = 0x01; + } + switch (spec->board_config) { case STAC_D965_3ST: case STAC_D965_5ST: /* GPIO0 High = Enable EAPD */ - spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x01; - spec->gpio_data = 0x01; spec->num_dmics = 0; - spec->init = d965_core_init; break; case STAC_DELL_BIOS: @@ -5583,16 +5586,11 @@ static int patch_stac927x(struct hda_codec *codec) snd_hda_codec_set_pincfg(codec, 0x0e, 0x02a79130); /* fallthru */ case STAC_DELL_3ST: - /* GPIO2 High = Enable EAPD */ - spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04; - spec->gpio_data = 0x04; - switch (codec->subsystem_id) { - case 0x1028022f: - /* correct EAPD to be GPIO0 */ - spec->eapd_mask = spec->gpio_mask = 0x01; - spec->gpio_dir = spec->gpio_data = 0x01; - break; - }; + if (codec->subsystem_id != 0x1028022f) { + /* GPIO2 High = Enable EAPD */ + spec->eapd_mask = spec->gpio_mask = 0x04; + spec->gpio_dir = spec->gpio_data = 0x04; + } spec->dmic_nids = stac927x_dmic_nids; spec->num_dmics = STAC927X_NUM_DMICS; @@ -5601,14 +5599,9 @@ static int patch_stac927x(struct hda_codec *codec) spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids); break; default: - if (spec->board_config > STAC_D965_REF) { - /* GPIO0 High = Enable EAPD */ - spec->eapd_mask = spec->gpio_mask = 0x01; - spec->gpio_dir = spec->gpio_data = 0x01; - } spec->num_dmics = 0; - spec->init = stac927x_core_init; + break; } spec->num_caps = STAC927X_NUM_CAPS; -- cgit v1.2.3 From fc64b26cfa3c7ee5ba23ab549ecd6415bed6b0eb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Sep 2009 15:33:01 +0200 Subject: ALSA: hda - Set default GPIO for IDT92HD71bxx A smiliar fix for IDT 92HD71Bxx codecs like the previous commit for other IDT/STAC codecs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 2c8a8039c75..23a698715e7 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5242,7 +5242,7 @@ again: stac92xx_set_config_regs(codec, stac92hd71bxx_brd_tbl[spec->board_config]); - if (spec->board_config > STAC_92HD71BXX_REF) { + if (spec->board_config != STAC_92HD71BXX_REF) { /* GPIO0 = EAPD */ spec->gpio_mask = 0x01; spec->gpio_dir = 0x01; -- cgit v1.2.3 From 5f380eb1eff2031b5101a64c76b54cca8e1c7079 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Sep 2009 15:36:14 +0200 Subject: ALSA: hda - Fix HP/line-out initialization with IDT/STAC codecs It's possible that hp_detect is set even though no headphone pin is detected. The driver issues, however, an unsol event only to hp_pins[0], which can be invalid. This patch adds the check of the valid pin to send an unsol event at initialization and resume callbacks. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 23a698715e7..fe2ba764d34 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4166,7 +4166,10 @@ static int stac92xx_init(struct hda_codec *codec) stac92xx_auto_set_pinctl(codec, spec->autocfg.line_out_pins[0], AC_PINCTL_OUT_EN); /* fake event to set up pins */ - stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]); + if (cfg->hp_pins[0]) + stac_issue_unsol_event(codec, cfg->hp_pins[0]); + else if (cfg->line_out_pins[0]) + stac_issue_unsol_event(codec, cfg->line_out_pins[0]); } else { stac92xx_auto_init_multi_out(codec); stac92xx_auto_init_hp_out(codec); @@ -4688,8 +4691,13 @@ static int stac92xx_resume(struct hda_codec *codec) snd_hda_codec_resume_amp(codec); snd_hda_codec_resume_cache(codec); /* fake event to set up pins again to override cached values */ - if (spec->hp_detect) - stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]); + if (spec->hp_detect) { + if (spec->autocfg.hp_pins[0]) + stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]); + else if (spec->autocfg.line_out_pins[0]) + stac_issue_unsol_event(codec, + spec->autocfg.line_out_pins[0]); + } return 0; } -- cgit v1.2.3 From 6e34c033210bb86b3f5f45fd6497f74150bdf620 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Sep 2009 15:42:18 +0200 Subject: ALSA: hda - Add support for HP dv6 Add the quirk entry for HP dv6. Also add a workaround for the headphone detection by setting hp_detect=1 beforehand. Without this, the driver won't do auto-muting because BIOS doesn't give any HP pin but only a line-out pin. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index fe2ba764d34..cc0e26c6997 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1690,6 +1690,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "HP mini 1000", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361b, "HP HDX", STAC_HP_HDX), /* HDX16 */ + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3620, + "HP dv6", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010, "HP", STAC_HP_DV5), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233, @@ -5383,6 +5385,11 @@ again: case STAC_HP_DV5: snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010); stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN); + /* HP dv6 gives the headphone pin as a line-out. Thus we + * need to set hp_detect flag here to force to enable HP + * detection. + */ + spec->hp_detect = 1; break; case STAC_HP_HDX: spec->num_dmics = 1; -- cgit v1.2.3 From 44da531e95647b2c90f2b89dec9000d36705934e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Sep 2009 12:35:56 +0200 Subject: ALSA: hda - Fix IDT92HD83* codec setup Remove unnecessary (and buggy) init sequences left for IDT92HD83* codecs in the previous fixes. The DACs are now dynamically connected, thus shouldn't be set statically in init verbs. Also, the mono_nid is detected dynamically, thus shouldn't be set staticaly, too. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index cc0e26c6997..0201f2c4993 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -864,10 +864,6 @@ static struct hda_verb stac92hd73xx_core_init[] = { }; static struct hda_verb stac92hd83xxx_core_init[] = { - { 0xa, AC_VERB_SET_CONNECT_SEL, 0x1}, - { 0xb, AC_VERB_SET_CONNECT_SEL, 0x1}, - { 0xd, AC_VERB_SET_CONNECT_SEL, 0x0}, - /* power state controls amps */ { 0x01, AC_VERB_SET_EAPD, 1 << 2}, {} @@ -5076,7 +5072,6 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) codec->spec = spec; codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs; - spec->mono_nid = 0x19; spec->digbeep_nid = 0x21; spec->mux_nids = stac92hd83xxx_mux_nids; spec->num_muxes = ARRAY_SIZE(stac92hd83xxx_mux_nids); -- cgit v1.2.3 From 69b5655a85b7bbfdb724a3fb25ae01fd4bc7f53b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Sep 2009 12:37:42 +0200 Subject: ALSA: hda - Fix Dell S14 pin setup The pin setup for Dell S14 quirk is rather wrong for the latest driver. Fixed pin 0x0a, 0x0b, 0x0d and 0x0f. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0201f2c4993..826137ec300 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1586,8 +1586,8 @@ static unsigned int ref92hd83xxx_pin_configs[10] = { }; static unsigned int dell_s14_pin_configs[10] = { - 0x02214030, 0x02211010, 0x02a19020, 0x01014050, - 0x40f000f0, 0x01819040, 0x40f000f0, 0x90a60160, + 0x0221403f, 0x0221101f, 0x02a19020, 0x90170110, + 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a60160, 0x40f000f0, 0x40f000f0, }; -- cgit v1.2.3 From b99dba34dc9ec007a0c8be98c0333dd37463d2fd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 17 Sep 2009 18:23:00 +0200 Subject: ALSA: hda - Fix MSI GX620 mixer The headphone and speaker mixer elements aren't properly set for MSI GX620 with targa-8ch-dig quirk. Also fixed the speaker volume control for other ALC883-targa quirks, too. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7702f155153..12960581956 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7927,8 +7927,9 @@ static struct snd_kcontrol_new alc883_fivestack_mixer[] = { static struct snd_kcontrol_new alc883_targa_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), @@ -7947,8 +7948,9 @@ static struct snd_kcontrol_new alc883_targa_mixer[] = { static struct snd_kcontrol_new alc883_targa_2ch_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), @@ -7960,6 +7962,15 @@ static struct snd_kcontrol_new alc883_targa_2ch_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc883_targa_8ch_mixer[] = { + HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT), + HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + { } /* end */ +}; + static struct snd_kcontrol_new alc883_lenovo_101e_2ch_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), @@ -9167,7 +9178,8 @@ static struct alc_config_preset alc882_presets[] = { .init_hook = alc882_targa_automute, }, [ALC883_TARGA_8ch_DIG] = { - .mixers = { alc883_base_mixer, alc883_chmode_mixer }, + .mixers = { alc883_targa_mixer, alc883_targa_8ch_mixer, + alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs, alc883_targa_verbs }, .num_dacs = ARRAY_SIZE(alc883_dac_nids), -- cgit v1.2.3