/* * linux/arch/arm/mach-omap2/board-2430sdp.c * * Copyright (C) 2006 Texas Instruments * * Modified from mach-omap2/board-generic.c * * Initial Code : Based on a patch from Komal Shah and Richard Woodruff * Updated the Code for 2430 SDP : Syed Mohammed Khasim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mmc-twl4030.h" #define SDP2430_FLASH_CS 0 #define SDP2430_SMC91X_CS 5 static struct mtd_partition sdp2430_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "bootloader", .offset = 0, .size = SZ_256K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next sector */ { .name = "params", .offset = MTDPART_OFS_APPEND, .size = SZ_128K, .mask_flags = 0, }, /* kernel */ { .name = "kernel", .offset = MTDPART_OFS_APPEND, .size = SZ_2M, .mask_flags = 0 }, /* file system */ { .name = "filesystem", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0 } }; static struct flash_platform_data sdp2430_flash_data = { .map_name = "cfi_probe", .width = 2, .parts = sdp2430_partitions, .nr_parts = ARRAY_SIZE(sdp2430_partitions), }; static struct resource sdp2430_flash_resource = { .start = SDP2430_CS0_BASE, .end = SDP2430_CS0_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }; static struct platform_device sdp2430_flash_device = { .name = "omapflash", .id = 0, .dev = { .platform_data = &sdp2430_flash_data, }, .num_resources = 1, .resource = &sdp2430_flash_resource, }; static struct resource sdp2430_smc91x_resources[] = { [0] = { .start = SDP2430_CS0_BASE, .end = SDP2430_CS0_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }, [1] = { .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; static struct platform_device sdp2430_smc91x_device = { .name = "smc91x", .id = -1, .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources), .resource = sdp2430_smc91x_resources, }; static struct platform_device *sdp2430_devices[] __initdata = { &sdp2430_smc91x_device, &sdp2430_flash_device, }; static inline void __init sdp2430_init_smc91x(void) { int eth_cs; unsigned long cs_mem_base; unsigned int rate; struct clk *gpmc_fck; eth_cs = SDP2430_SMC91X_CS; gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ if (IS_ERR(gpmc_fck)) { WARN_ON(1); return; } clk_enable(gpmc_fck); rate = clk_get_rate(gpmc_fck); /* Make sure CS1 timings are correct, for 2430 always muxed */ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); if (rate >= 160000000) { gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); } else if (rate >= 130000000) { gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); } else { /* rate = 100000000 */ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); } if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); goto out; } sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f; udelay(100); if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", OMAP24XX_ETHR_GPIO_IRQ); gpmc_cs_free(eth_cs); goto out; } gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ); out: clk_disable(gpmc_fck); clk_put(gpmc_fck); } static void __init omap_2430sdp_init_irq(void) { omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); sdp2430_init_smc91x(); } static struct omap_uart_config sdp2430_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; static struct omap_board_config_kernel sdp2430_config[] = { {OMAP_TAG_UART, &sdp2430_uart_config}, }; static struct twl4030_gpio_platform_data sdp2430_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, }; static struct twl4030_platform_data sdp2430_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .gpio = &sdp2430_gpio_data, }; static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { { I2C_BOARD_INFO("twl4030", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_24XX_SYS_NIRQ, .platform_data = &sdp2430_twldata, }, }; static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 400, NULL, 0); omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo, ARRAY_SIZE(sdp2430_i2c_boardinfo)); return 0; } static struct twl4030_hsmmc_info mmc[] __initdata = { { .mmc = 1, .wires = 4, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .ext_clock = 1, }, {} /* Terminator */ }; static void __init omap_2430sdp_init(void) { omap2430_i2c_init(); platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_board_config = sdp2430_config; omap_board_config_size = ARRAY_SIZE(sdp2430_config); omap_serial_init(); twl4030_mmc_init(mmc); } static void __init omap_2430sdp_map_io(void) { omap2_set_globals_243x(); omap2_map_common_io(); } MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, .init_irq = omap_2430sdp_init_irq, .init_machine = omap_2430sdp_init, .timer = &omap_timer, MACHINE_END