# arch/arm/mach-s3c6410/Kconfig # # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics # # Licensed under GPLv2 # Configuration options for the S3C6410 CPU config CPU_S3C6410 bool select CPU_S3C6400_INIT select CPU_S3C6400_CLOCK help Enable S3C6410 CPU support config S3C6410_SETUP_SDHCI bool help Internal helper functions for S3C6410 based SDHCI systems config MACH_SMDK6410 bool "SMDK6410" select CPU_S3C6410 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 select S3C_DEV_FB select S3C_DEV_USB_HOST select S3C6410_SETUP_SDHCI select S3C64XX_SETUP_I2C1 select S3C64XX_SETUP_FB_24BPP help Machine support for the Samsung SMDK6410 # At least some of the SMDK6410s were shipped with the card detect # for the MMC/SD slots connected to the same input. This means that # either the boards need to be altered to have channel0 to an alternate # configuration or that only one slot can be used. choice prompt "SMDK6410 MMC/SD slot setup" depends on MACH_SMDK6410 config SMDK6410_SD_CH0 bool "Use channel 0 only" depends on MACH_SMDK6410 help Select CON7 (channel 0) as the MMC/SD slot, as at least some SMDK6410 boards come with the resistors fitted so that the card detects for channels 0 and 1 are the same. config SMDK6410_SD_CH1 bool "Use channel 1 only" depends on MACH_SMDK6410 help Select CON6 (channel 1) as the MMC/SD slot, as at least some SMDK6410 boards come with the resistors fitted so that the card detects for channels 0 and 1 are the same. endchoice config MACH_OM_3D7K bool "Openmoko 3D7K Phone" select CPU_S3C6410 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 select S3C_DEV_USB_HOST select S3C6410_SETUP_SDHCI select S3C64XX_SETUP_I2C1 select S3C_DEV_FB select S3C_DEV_CAMIF select S3C64XX_SETUP_FB_24BPP # select SENSORS_PCF50633 select POWER_SUPPLY select HDQ_GPIO_BITBANG select S3C_PWM select FIQ select MACH_NEO1973 help Machine support for the Openmoko 3D7K Phone