/* break.S: Break interrupt handling (kept separate from entry.S) * * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include <linux/linkage.h> #include <asm/setup.h> #include <asm/segment.h> #include <asm/ptrace.h> #include <asm/thread_info.h> #include <asm/spr-regs.h> #include <asm/errno.h> # # the break handler has its own stack # .section .bss.stack .globl __break_user_context .balign THREAD_SIZE __break_stack: .space THREAD_SIZE - FRV_FRAME0_SIZE __break_frame_0: .space FRV_FRAME0_SIZE # # miscellaneous variables # .section .bss #ifdef CONFIG_MMU .globl __break_tlb_miss_real_return_info __break_tlb_miss_real_return_info: .balign 8 .space 2*4 /* saved PCSR, PSR for TLB-miss handler fixup */ #endif __break_trace_through_exceptions: .space 4 #define CS2_ECS1 0xe1200000 #define CS2_USERLED 0x4 .macro LEDS val,reg # sethi.p %hi(CS2_ECS1+CS2_USERLED),gr30 # setlo %lo(CS2_ECS1+CS2_USERLED),gr30 # setlos #~\val,\reg # st \reg,@(gr30,gr0) # setlos #0x5555,\reg # sethi.p %hi(0xffc00100),gr30 # setlo %lo(0xffc00100),gr30 # sth \reg,@(gr30,gr0) # membar .endm ############################################################################### # # entry point for Break Exceptions/Interrupts # ############################################################################### .section .text.break .balign 4 .globl __entry_break __entry_break: #ifdef CONFIG_MMU movgs gr31,scr3 #endif LEDS 0x1001,gr31 sethi.p %hi(__break_frame_0),gr31 setlo %lo(__break_frame_0),gr31 stdi gr2,@(gr31,#REG_GR(2)) movsg ccr,gr3 sti gr3,@(gr31,#REG_CCR) # catch the return from a TLB-miss handler that had single-step disabled # traps will be enabled, so we have to do this now #ifdef CONFIG_MMU movsg bpcsr,gr3 sethi.p %hi(__break_tlb_miss_return_breaks_here),gr2 setlo %lo(__break_tlb_miss_return_breaks_here),gr2 subcc gr2,gr3,gr0,icc0 beq icc0,#2,__break_return_singlestep_tlbmiss #endif # determine whether we have stepped through into an exception # - we need to take special action to suspend h/w single stepping if we've done # that, so that the gdbstub doesn't get bogged down endlessly stepping through # external interrupt handling movsg bpsr,gr3 andicc gr3,#BPSR_BET,gr0,icc0 bne icc0,#2,__break_maybe_userspace /* jump if PSR.ET was 1 */ LEDS 0x1003,gr2 movsg brr,gr3 andicc gr3,#BRR_ST,gr0,icc0 andicc.p gr3,#BRR_SB,gr0,icc1 bne icc0,#2,__break_step /* jump if single-step caused break */ beq icc1,#2,__break_continue /* jump if BREAK didn't cause break */ LEDS 0x1007,gr2 # handle special breaks movsg bpcsr,gr3 sethi.p %hi(__entry_return_singlestep_breaks_here),gr2 setlo %lo(__entry_return_singlestep_breaks_here),gr2 subcc gr2,gr3,gr0,icc0 beq icc0,#2,__break_return_singlestep bra __break_continue ############################################################################### # # handle BREAK instruction in kernel-mode exception epilogue # ############################################################################### __break_return_singlestep: LEDS 0x100f,gr2 # special break insn requests single-stepping to be turned back on # HERE RETT # PSR.ET 0 0 # PSR.PS old PSR.S ? # PSR.S 1 1 # BPSR.ET 0 1 (can't have caused orig excep otherwise) # BPSR.BS 1 old PSR.S movsg dcr,gr2 sethi.p %hi(DCR_SE),gr3 setlo %lo(DCR_SE),gr3 or gr2,gr3,gr2 movgs gr2,dcr movsg psr,gr2 andi gr2,#PSR_PS,gr2 slli gr2,#11,gr2 /* PSR.PS -> BPSR.BS */ ori gr2,#BPSR_BET,gr2 /* 1 -> BPSR.BET */ movgs gr2,bpsr # return to the invoker of the original kernel exception movsg pcsr,gr2 movgs gr2,bpcsr LEDS 0x101f,gr2 ldi @(gr31,#REG_CCR),gr3 movgs gr3,ccr lddi.p @(gr31,#REG_GR(2)),gr2 xor gr31,gr31,gr31 movgs gr0,brr #ifdef CONFIG_MMU movsg scr3,gr31 #endif rett #1 ############################################################################### # # handle BREAK instruction in TLB-miss handler return path # ############################################################################### #ifdef CONFIG_MMU __break_return_singlestep_tlbmiss: LEDS 0x1100,gr2 sethi.p %hi(__break_tlb_miss_real_return_info),gr3 setlo %lo(__break_tlb_miss_real_return_info),gr3 lddi @(gr3,#0),gr2 movgs gr2,pcsr movgs gr3,psr bra __break_return_singlestep #endif ############################################################################### # # handle single stepping into an exception prologue from kernel mode # - we try and catch it whilst it is still in the main vector table # - if we catch it there, we have to jump to the fixup handler # - there is a fixup table that has a pointer for every 16b slot in the trap # table # ############################################################################### __break_step: LEDS 0x2003,gr2 # external interrupts seem to escape from the trap table before single # step catches up with them movsg bpcsr,gr2 sethi.p %hi(__entry_kernel_external_interrupt),gr3 setlo %lo(__entry_kernel_external_interrupt),gr3 subcc.p gr2,gr3,gr0,icc0 sethi %hi(__entry_uspace_external_interrupt),gr3 setlo.p %lo(__entry_uspace_external_interrupt),gr3 beq icc0,#2,__break_step_kernel_external_interrupt subcc.p gr2,gr3,gr0,icc0 sethi %hi(__entry_kernel_external_interrupt_virtually_disabled),gr3 setlo.p %lo(__entry_kernel_external_interrupt_virtually_disabled),gr3 beq icc0,#2,__break_step_uspace_external_interrupt subcc.p gr2,gr3,gr0,icc0 sethi %hi(__entry_kernel_external_interrupt_virtual_reenable),gr3 setlo.p %lo(__entry_kernel_external_interrupt_virtual_reenable),gr3 beq icc0,#2,__break_step_kernel_external_interrupt_virtually_disabled subcc gr2,gr3,gr0,icc0 beq icc0,#2,__break_step_kernel_external_interrupt_virtual_reenable LEDS 0x2007,gr2 # the two main vector tables are adjacent on one 8Kb slab movsg bpcsr,gr2 setlos #0xffffe000,gr3 and gr2,gr3,gr2 sethi.p %hi(__trap_tables),gr3 setlo %lo(__trap_tables),gr3 subcc gr2,gr3,gr0,icc0 bne icc0,#2,__break_continue LEDS 0x200f,gr2 # skip workaround if so requested by GDB sethi.p %hi(__break_trace_through_exceptions),gr3 setlo %lo(__break_trace_through_exceptions),gr3 ld @(gr3,gr0),gr3 subcc gr3,gr0,gr0,icc0 bne icc0,#0,__break_continue LEDS 0x201f,gr2 # access the fixup table - there's a 1:1 mapping between the slots in the trap tables and # the slots in the trap fixup tables allowing us to simply divide the offset into the # former by 4 to access the latter sethi.p %hi(__trap_tables),gr3 setlo %lo(__trap_tables),gr3 movsg bpcsr,gr2 sub gr2,gr3,gr2 srli.p gr2,#2,gr2 sethi %hi(__trap_fixup_tables),gr3 setlo.p %lo(__trap_fixup_tables),gr3 andi gr2,#~3,gr2 ld @(gr2,gr3),gr2 jmpil @(gr2,#0) # step through an internal exception from kernel mode .globl __break_step_kernel_softprog_interrupt __break_step_kernel_softprog_interrupt: sethi.p %hi(__entry_kernel_softprog_interrupt_reentry),gr3 setlo %lo(__entry_kernel_softprog_interrupt_reentry),gr3 bra __break_return_as_kernel_prologue # step through an external interrupt from kernel mode .globl __break_step_kernel_external_interrupt __break_step_kernel_external_interrupt: # deal with virtual interrupt disablement beq icc2,#0,__break_step_kernel_external_interrupt_virtually_disabled sethi.p %hi(__entry_kernel_external_interrupt_reentry),gr3 setlo %lo(__entry_kernel_external_interrupt_reentry),gr3 __break_return_as_kernel_prologue: LEDS 0x203f,gr2 movgs gr3,bpcsr # do the bit we had to skip #ifdef CONFIG_MMU movsg ear0,gr2 /* EAR0 can get clobbered by gdb-stub (ICI/ICEI) */ movgs gr2,scr2 #endif or.p sp,gr0,gr2 /* set up the stack pointer */ subi sp,#REG__END,sp sti.p gr2,@(sp,#REG_SP) setlos #REG__STATUS_STEP,gr2 sti gr2,@(sp,#REG__STATUS) /* record single step status */ # cancel single-stepping mode movsg dcr,gr2 sethi.p %hi(~DCR_SE),gr3 setlo %lo(~DCR_SE),gr3 and gr2,gr3,gr2 movgs gr2,dcr LEDS 0x207f,gr2 ldi @(gr31,#REG_CCR),gr3 movgs gr3,ccr lddi.p @(gr31,#REG_GR(2)),gr2 xor gr31,gr31,gr31 movgs gr0,brr #ifdef CONFIG_MMU movsg scr3,gr31 #endif rett #1 # we single-stepped into an interrupt handler whilst interrupts were merely virtually disabled # need to really disable interrupts, set flag, fix up and return __break_step_kernel_external_interrupt_virtually_disabled: movsg psr,gr2 andi gr2,#~PSR_PIL,gr2 ori gr2,#PSR_PIL_14,gr2 /* debugging interrupts only */ movgs gr2,psr ldi @(gr31,#REG_CCR),gr3 movgs gr3,ccr subcc.p gr0,gr0,gr0,icc2 /* leave Z set, clear C */ # exceptions must've been enabled and we must've been in supervisor mode setlos BPSR_BET|BPSR_BS,gr3 movgs gr3,bpsr # return to where the interrupt happened movsg pcsr,gr2 movgs gr2,bpcsr lddi.p @(gr31,#REG_GR(2)),gr2 xor gr31,gr31,gr31 movgs gr0,brr #ifdef CONFIG_MMU movsg scr3,gr31 #endif rett #1 # we stepped through into the virtual interrupt reenablement trap # # we also want to single step anyway, but after fixing up so that we get an event on the # instruction after the broken-into exception returns .globl __break_step_kernel_external_interrupt_virtual_reenable __break_step_kernel_external_interrupt_virtual_reenable: movsg psr,gr2 andi gr2,#~PSR_PIL,gr2 movgs gr2,psr ldi @(gr31,#REG_CCR),gr3 movgs gr3,ccr subicc gr0,#1,gr0,icc2 /* clear Z, set C */ # save the adjusted ICC2 movsg ccr,gr3 sti gr3,@(gr31,#REG_CCR) # exceptions must've been enabled and we must've been in supervisor mode setlos BPSR_BET|BPSR_BS,gr3 movgs gr3,bpsr # return to where the trap happened movsg pcsr,gr2 movgs gr2,bpcsr # and then process the single step bra __break_continue # step through an internal exception from uspace mode .globl __break_step_uspace_softprog_interrupt __break_step_uspace_softprog_interrupt: sethi.p %hi(__entry_uspace_softprog_interrupt_reentry),gr3 setlo %lo(__entry_uspace_softprog_interrupt_reentry),gr3 bra __break_return_as_uspace_prologue # step through an external interrupt from kernel mode .globl __break_step_uspace_external_interrupt __break_step_uspace_external_interrupt: sethi.p %hi(__entry_uspace_external_interrupt_reentry),gr3 setlo %lo(__entry_uspace_external_interrupt_reentry),gr3 __break_return_as_uspace_prologue: LEDS 0x20ff,gr2 movgs gr3,bpcsr # do the bit we had to skip sethi.p %hi(__kernel_frame0_ptr),gr28 setlo %lo(__kernel_frame0_ptr),gr28 ldi.p @(gr28,#0),gr28 setlos #REG__STATUS_STEP,gr2 sti gr2,@(gr28,#REG__STATUS) /* record single step status */ # cancel single-stepping mode movsg dcr,gr2 sethi.p %hi(~DCR_SE),gr3 setlo %lo(~DCR_SE),gr3 and gr2,gr3,gr2 movgs gr2,dcr LEDS 0x20fe,gr2 ldi @(gr31,#REG_CCR),gr3 movgs gr3,ccr lddi.p @(gr31,#REG_GR(2)),gr2 xor gr31,gr31,gr31 movgs gr0,brr #ifdef CONFIG_MMU movsg scr3,gr31 #endif rett #1 #ifdef CONFIG_MMU # step through an ITLB-miss handler from user mode .globl __break_user_insn_tlb_miss __break_user_insn_tlb_miss: # we'll want to try the trap stub again sethi.p %hi(__trap_user_insn_tlb_miss),gr2 setlo %lo(__trap_user_insn_tlb_miss),gr2 movgs gr2,bpcsr __break_tlb_miss_common: LEDS 0x2101,gr2 # cancel single-stepping mode movsg dcr,gr2 sethi.p %hi(~DCR_SE),gr3 setlo %lo(~DCR_SE),gr3 and gr2,gr3,gr2 movgs gr2,dcr # we'll swap the real return address for one with a BREAK insn so that we can re-enable # single stepping on return movsg pcsr,gr2 sethi.p %hi(__break_tlb_miss_real_return_info),gr3 setlo %lo(__break_tlb_miss_real_return_info),gr3 sti gr2,@(gr3,#0) sethi.p %hi(__break_tlb_miss_return_break),gr2 setlo %lo(__break_tlb_miss_return_break),gr2 movgs gr2,pcsr # we also have to fudge PSR because the return BREAK is in kernel space and we want # to get a BREAK fault not an access violation should the return be to userspace movsg psr,gr2 sti.p gr2,@(gr3,#4) ori gr2,#PSR_PS,gr2 movgs gr2,psr LEDS 0x2102,gr2 ldi @(gr31,#REG_CCR),gr3 movgs gr3,ccr lddi @(gr31,#REG_GR(2)),gr2 movsg scr3,gr31 movgs gr0,brr rett #1 # step through a DTLB-miss handler from user mode .globl __break_user_data_tlb_miss __break_user_data_tlb_miss: # we'll want to try the trap stub again sethi.p %hi(__trap_user_data_tlb_miss),gr2 setlo %lo(__trap_user_data_tlb_miss),gr2 movgs gr2,bpcsr bra __break_tlb_miss_common # step through an ITLB-miss handler from kernel mode .globl __break_kernel_insn_tlb_miss __break_kernel_insn_tlb_miss: # we'll want to try the trap stub again sethi.p %hi(__trap_kernel_insn_tlb_miss),gr2 setlo %lo(__trap_kernel_insn_tlb_miss),gr2 movgs gr2,bpcsr bra __break_tlb_miss_common # step through a DTLB-miss handler from kernel mode .globl __break_kernel_data_tlb_miss __break_kernel_data_tlb_miss: # we'll want to try the trap stub again sethi.p %hi(__trap_kernel_data_tlb_miss),gr2 setlo %lo(__trap_kernel_data_tlb_miss),gr2 movgs gr2,bpcsr bra __break_tlb_miss_common #endif ############################################################################### # # handle debug events originating with userspace # ############################################################################### __break_maybe_userspace: LEDS 0x3003,gr2 setlos #BPSR_BS,gr2 andcc gr3,gr2,gr0,icc0 bne icc0,#0,__break_continue /* skip if PSR.S was 1 */ movsg brr,gr2 andicc gr2,#BRR_ST|BRR_SB,gr0,icc0 beq icc0,#0,__break_continue /* jump if not BREAK or single-step */ LEDS 0x3007,gr2 # do the first part of the exception prologue here sethi.p %hi(__kernel_frame0_ptr),gr28 setlo %lo(__kernel_frame0_ptr),gr28 ldi @(gr28,#0),gr28 andi gr28,#~7,gr28 # set up the kernel stack pointer sti sp ,@(gr28,#REG_SP) ori gr28,0,sp sti gr0 ,@(gr28,#REG_GR(28)) stdi gr20,@(gr28,#REG_GR(20)) stdi gr22,@(gr28,#REG_GR(22)) movsg tbr,gr20 movsg bpcsr,gr21 movsg psr,gr22 # determine the exception type and cancel single-stepping mode or gr0,gr0,gr23 movsg dcr,gr2 sethi.p %hi(DCR_SE),gr3 setlo %lo(DCR_SE),gr3 andcc gr2,gr3,gr0,icc0 beq icc0,#0,__break_no_user_sstep /* must have been a BREAK insn */ not gr3,gr3 and gr2,gr3,gr2 movgs gr2,dcr ori gr23,#REG__STATUS_STEP,gr23 __break_no_user_sstep: LEDS 0x300f,gr2 movsg brr,gr2 andi gr2,#BRR_ST|BRR_SB,gr2 slli gr2,#1,gr2 or gr23,gr2,gr23 sti.p gr23,@(gr28,#REG__STATUS) /* record single step status */ # adjust the value acquired from TBR - this indicates the exception setlos #~TBR_TT,gr2 and.p gr20,gr2,gr20 setlos #TBR_TT_BREAK,gr2 or.p gr20,gr2,gr20 # fudge PSR.PS and BPSR.BS to return to kernel mode through the trap # table as trap 126 andi gr22,#~PSR_PS,gr22 /* PSR.PS should be 0 */ movgs gr22,psr setlos #BPSR_BS,gr2 /* BPSR.BS should be 1 and BPSR.BET 0 */ movgs gr2,bpsr # return through remainder of the exception prologue # - need to load gr23 with return handler address sethi.p %hi(__entry_return_from_user_exception),gr23 setlo %lo(__entry_return_from_user_exception),gr23 sethi.p %hi(__entry_common),gr3 setlo %lo(__entry_common),gr3 movgs gr3,bpcsr LEDS 0x301f,gr2 ldi @(gr31,#REG_CCR),gr3 movgs gr3,ccr lddi.p @(gr31,#REG_GR(2)),gr2 xor gr31,gr31,gr31 movgs gr0,brr #ifdef CONFIG_MMU movsg scr3,gr31 #endif rett #1 ############################################################################### # # resume normal debug-mode entry # ############################################################################### __break_continue: LEDS 0x4003,gr2 # set up the kernel stack pointer sti sp,@(gr31,#REG_SP) sethi.p %hi(__break_frame_0),sp setlo %lo(__break_frame_0),sp # finish building the exception frame stdi gr4 ,@(gr31,#REG_GR(4)) stdi gr6 ,@(gr31,#REG_GR(6)) stdi gr8 ,@(gr31,#REG_GR(8)) stdi gr10,@(gr31,#REG_GR(10)) stdi gr12,@(gr31,#REG_GR(12)) stdi gr14,@(gr31,#REG_GR(14)) stdi gr16,@(gr31,#REG_GR(16)) stdi gr18,@(gr31,#REG_GR(18)) stdi gr20,@(gr31,#REG_GR(20)) stdi gr22,@(gr31,#REG_GR(22)) stdi gr24,@(gr31,#REG_GR(24)) stdi gr26,@(gr31,#REG_GR(26)) sti gr0 ,@(gr31,#REG_GR(28)) /* NULL frame pointer */ sti gr29,@(gr31,#REG_GR(29)) sti gr30,@(gr31,#REG_GR(30)) sti gr8 ,@(gr31,#REG_ORIG_GR8) #ifdef CONFIG_MMU movsg scr3,gr19 sti gr19,@(gr31,#REG_GR(31)) #endif movsg bpsr ,gr19 movsg tbr ,gr20 movsg bpcsr,gr21 movsg psr ,gr22 movsg isr ,gr23 movsg cccr ,gr25 movsg lr ,gr26 movsg lcr ,gr27 andi.p gr22,#~(PSR_S|PSR_ET),gr5 /* rebuild PSR */ andi gr19,#PSR_ET,gr4 or.p gr4,gr5,gr5 srli gr19,#10,gr4 andi gr4,#PSR_S,gr4 or.p gr4,gr5,gr5 setlos #-1,gr6 sti gr20,@(gr31,#REG_TBR) sti gr21,@(gr31,#REG_PC) sti gr5 ,@(gr31,#REG_PSR) sti gr23,@(gr31,#REG_ISR) sti gr25,@(gr31,#REG_CCCR) stdi gr26,@(gr31,#REG_LR) sti gr6 ,@(gr31,#REG_SYSCALLNO) # store CPU-specific regs movsg iacc0h,gr4 movsg iacc0l,gr5 stdi gr4,@(gr31,#REG_IACC0) movsg gner0,gr4 movsg gner1,gr5 stdi gr4,@(gr31,#REG_GNER0) # build the debug register frame movsg brr,gr4 movgs gr0,brr movsg nmar,gr5 movsg dcr,gr6 sethi.p %hi(__debug_status),gr7 setlo %lo(__debug_status),gr7 stdi gr4 ,@(gr7,#DEBUG_BRR) sti gr19,@(gr7,#DEBUG_BPSR) sti.p gr6 ,@(gr7,#DEBUG_DCR) # trap exceptions during break handling and disable h/w breakpoints/watchpoints sethi %hi(DCR_EBE),gr5 setlo.p %lo(DCR_EBE),gr5 sethi %hi(__entry_breaktrap_table),gr4 setlo %lo(__entry_breaktrap_table),gr4 movgs gr5,dcr movgs gr4,tbr # set up kernel global registers sethi.p %hi(__kernel_current_task),gr5 setlo %lo(__kernel_current_task),gr5 ld @(gr5,gr0),gr29 ldi.p @(gr29,#4),gr15 ; __current_thread_info = current->thread_info sethi %hi(_gp),gr16 setlo.p %lo(_gp),gr16 # make sure we (the kernel) get div-zero and misalignment exceptions setlos #ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5 movgs gr5,isr # enter the GDB stub LEDS 0x4007,gr2 or.p gr0,gr0,fp call debug_stub LEDS 0x403f,gr2 # return from break lddi @(gr31,#REG_IACC0),gr4 movgs gr4,iacc0h movgs gr5,iacc0l lddi @(gr31,#REG_GNER0),gr4 movgs gr4,gner0 movgs gr5,gner1 lddi @(gr31,#REG_LR) ,gr26 lddi @(gr31,#REG_CCR) ,gr24 lddi @(gr31,#REG_PSR) ,gr22 ldi @(gr31,#REG_PC) ,gr21 ldi @(gr31,#REG_TBR) ,gr20 sethi.p %hi(__debug_status),gr6 setlo %lo(__debug_status),gr6 ldi.p @(gr6,#DEBUG_DCR) ,gr6 andi gr22,#PSR_S,gr19 /* rebuild BPSR */ andi.p gr22,#PSR_ET,gr5 slli gr19,#10,gr19 or gr5,gr19,gr19 movgs gr6 ,dcr movgs gr19,bpsr movgs gr20,tbr movgs gr21,bpcsr movgs gr23,isr movgs gr24,ccr movgs gr25,cccr movgs gr26,lr movgs gr27,lcr LEDS 0x407f,gr2 #ifdef CONFIG_MMU ldi @(gr31,#REG_GR(31)),gr2 movgs gr2,scr3 #endif ldi @(gr31,#REG_GR(30)),gr30 ldi @(gr31,#REG_GR(29)),gr29 lddi @(gr31,#REG_GR(26)),gr26 lddi @(gr31,#REG_GR(24)),gr24 lddi @(gr31,#REG_GR(22)),gr22 lddi @(gr31,#REG_GR(20)),gr20 lddi @(gr31,#REG_GR(18)),gr18 lddi @(gr31,#REG_GR(16)),gr16 lddi @(gr31,#REG_GR(14)),gr14 lddi @(gr31,#REG_GR(12)),gr12 lddi @(gr31,#REG_GR(10)),gr10 lddi @(gr31,#REG_GR(8)) ,gr8 lddi @(gr31,#REG_GR(6)) ,gr6 lddi @(gr31,#REG_GR(4)) ,gr4 lddi @(gr31,#REG_GR(2)) ,gr2 ldi.p @(gr31,#REG_SP) ,sp xor gr31,gr31,gr31 movgs gr0,brr #ifdef CONFIG_MMU movsg scr3,gr31 #endif rett #1 ################################################################################################### # # GDB stub "system calls" # ################################################################################################### #ifdef CONFIG_GDBSTUB # void gdbstub_console_write(struct console *con, const char *p, unsigned n) .globl gdbstub_console_write gdbstub_console_write: break bralr #endif # GDB stub BUG() trap # GR8 is the proposed signal number .globl __debug_bug_trap __debug_bug_trap: break bralr # transfer kernel exeception to GDB for handling .globl __break_hijack_kernel_event __break_hijack_kernel_event: break .globl __break_hijack_kernel_event_breaks_here __break_hijack_kernel_event_breaks_here: nop #ifdef CONFIG_MMU # handle a return from TLB-miss that requires single-step reactivation .globl __break_tlb_miss_return_break __break_tlb_miss_return_break: break __break_tlb_miss_return_breaks_here: nop #endif # guard the first .text label in the next file from confusion nop