/* * boot.c - Architecture-Specific Low-Level ACPI Boot Support * * Copyright (C) 2001, 2002 Paul Diefenbaugh * Copyright (C) 2001 Jun Nakajima * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_X86_64 static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { } extern void __init clustered_apic_check(void); static inline int ioapic_setup_disabled(void) { return 0; } #include #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC #include #include #endif /* CONFIG_X86_LOCAL_APIC */ #endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ ((acpi_table_entry_header *)entry)->length != sizeof(*entry)) #define PREFIX "ACPI: " #ifdef CONFIG_ACPI_PCI int acpi_noirq __initdata; /* skip ACPI IRQ initialization */ int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ #else int acpi_noirq __initdata = 1; int acpi_pci_disabled __initdata = 1; #endif int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; int acpi_ioapic; int acpi_strict; EXPORT_SYMBOL(acpi_strict); acpi_interrupt_flags acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; #ifdef CONFIG_X86_LOCAL_APIC static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #endif #ifndef __HAVE_ARCH_CMPXCHG #warning ACPI uses CMPXCHG, i486 and later hardware #endif #define MAX_MADT_ENTRIES 256 u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] = { [0 ... MAX_MADT_ENTRIES-1] = 0xff }; EXPORT_SYMBOL(x86_acpiid_to_apicid); /* -------------------------------------------------------------------------- Boot-time Configuration -------------------------------------------------------------------------- */ /* * The default interrupt routing model is PIC (8259). This gets * overriden if IOAPICs are enumerated (below). */ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; #ifdef CONFIG_X86_64 /* rely on all ACPI tables being in the direct mapping */ char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) return NULL; if (phys_addr < (end_pfn_map << PAGE_SHIFT)) return __va(phys_addr); return NULL; } #else /* * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END, * to map the target physical address. The problem is that set_fixmap() * provides a single page, and it is possible that the page is not * sufficient. * By using this area, we can map up to MAX_IO_APICS pages temporarily, * i.e. until the next __va_range() call. * * Important Safety Note: The fixed I/O APIC page numbers are *subtracted* * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and * count idx down while incrementing the phys address. */ char *__acpi_map_table(unsigned long phys, unsigned long size) { unsigned long base, offset, mapped_size; int idx; if (phys + size < 8*1024*1024) return __va(phys); offset = phys & (PAGE_SIZE - 1); mapped_size = PAGE_SIZE - offset; set_fixmap(FIX_ACPI_END, phys); base = fix_to_virt(FIX_ACPI_END); /* * Most cases can be covered by the below. */ idx = FIX_ACPI_END; while (mapped_size < size) { if (--idx < FIX_ACPI_BEGIN) return NULL; /* cannot handle this */ phys += PAGE_SIZE; set_fixmap(idx, phys); mapped_size += PAGE_SIZE; } return ((unsigned char *) base + offset); } #endif #ifdef CONFIG_PCI_MMCONFIG /* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ struct acpi_table_mcfg_config *pci_mmcfg_config; int pci_mmcfg_config_num; int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) { struct acpi_table_mcfg *mcfg; unsigned long i; int config_size; if (!phys_addr || !size) return -EINVAL; mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size); if (!mcfg) { printk(KERN_WARNING PREFIX "Unable to map MCFG\n"); return -ENODEV; } /* how many config structures do we have */ pci_mmcfg_config_num = 0; i = size - sizeof(struct acpi_table_mcfg); while (i >= sizeof(struct acpi_table_mcfg_config)) { ++pci_mmcfg_config_num; i -= sizeof(struct acpi_table_mcfg_config); }; if (pci_mmcfg_config_num == 0) { printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); return -ENODEV; } config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); if (!pci_mmcfg_config) { printk(KERN_WARNING PREFIX "No memory for MCFG config tables\n"); return -ENOMEM; } memcpy(pci_mmcfg_config, &mcfg->config, config_size); for (i = 0; i < pci_mmcfg_config_num; ++i) { if (mcfg->config[i].base_reserved) { printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n"); return -ENODEV; } } return 0; } #endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC static int __init acpi_parse_madt ( unsigned long phys_addr, unsigned long size) { struct acpi_table_madt *madt = NULL; if (!phys_addr || !size) return -EINVAL; madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size); if (!madt) { printk(KERN_WARNING PREFIX "Unable to map MADT\n"); return -ENODEV; } if (madt->lapic_address) { acpi_lapic_addr = (u64) madt->lapic_address; printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", madt->lapic_address); } acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); return 0; } static int __init acpi_parse_lapic ( acpi_table_entry_header *header, const unsigned long end) { struct acpi_table_lapic *processor = NULL; processor = (struct acpi_table_lapic*) header; if (BAD_MADT_ENTRY(processor, end)) return -EINVAL; acpi_table_print_madt_entry(header); /* no utility in registering a disabled processor */ if (processor->flags.enabled == 0) return 0; x86_acpiid_to_apicid[processor->acpi_id] = processor->id; mp_register_lapic ( processor->id, /* APIC ID */ processor->flags.enabled); /* Enabled? */ return 0; } static int __init acpi_parse_lapic_addr_ovr ( acpi_table_entry_header *header, const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL; lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header; if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) return -EINVAL; acpi_lapic_addr = lapic_addr_ovr->address; return 0; } static int __init acpi_parse_lapic_nmi ( acpi_table_entry_header *header, const unsigned long end) { struct acpi_table_lapic_nmi *lapic_nmi = NULL; lapic_nmi = (struct acpi_table_lapic_nmi*) header; if (BAD_MADT_ENTRY(lapic_nmi, end)) return -EINVAL; acpi_table_print_madt_entry(header); if (lapic_nmi->lint != 1) printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n"); return 0; } #endif /*CONFIG_X86_LOCAL_APIC*/ #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) static int __init acpi_parse_ioapic ( acpi_table_entry_header *header, const unsigned long end) { struct acpi_table_ioapic *ioapic = NULL; ioapic = (struct acpi_table_ioapic*) header; if (BAD_MADT_ENTRY(ioapic, end)) return -EINVAL; acpi_table_print_madt_entry(header); mp_register_ioapic ( ioapic->id, ioapic->address, ioapic->global_irq_base); return 0; } /* * Parse Interrupt Source Override for the ACPI SCI */ static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; if (polarity == 0) /* compatible SCI polarity is low */ polarity = 3; /* Command-line over-ride via acpi_sci= */ if (acpi_sci_flags.trigger) trigger = acpi_sci_flags.trigger; if (acpi_sci_flags.polarity) polarity = acpi_sci_flags.polarity; /* * mp_config_acpi_legacy_irqs() already setup IRQs < 16 * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ mp_override_legacy_irq(gsi, polarity, trigger, gsi); /* * stash over-ride to indicate we've been here * and for later update of acpi_fadt */ acpi_sci_override_gsi = gsi; return; } static int __init acpi_parse_int_src_ovr ( acpi_table_entry_header *header, const unsigned long end) { struct acpi_table_int_src_ovr *intsrc = NULL; intsrc = (struct acpi_table_int_src_ovr*) header; if (BAD_MADT_ENTRY(intsrc, end)) return -EINVAL; acpi_table_print_madt_entry(header); if (intsrc->bus_irq == acpi_fadt.sci_int) { acpi_sci_ioapic_setup(intsrc->global_irq, intsrc->flags.polarity, intsrc->flags.trigger); return 0; } if (acpi_skip_timer_override && intsrc->bus_irq == 0 && intsrc->global_irq == 2) { printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); return 0; } mp_override_legacy_irq ( intsrc->bus_irq, intsrc->flags.polarity, intsrc->flags.trigger, intsrc->global_irq); return 0; } static int __init acpi_parse_nmi_src ( acpi_table_entry_header *header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src = NULL; nmi_src = (struct acpi_table_nmi_src*) header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; acpi_table_print_madt_entry(header); /* TBD: Support nimsrc entries? */ return 0; } #endif /* CONFIG_X86_IO_APIC */ #ifdef CONFIG_ACPI_BUS /* * acpi_pic_sci_set_trigger() * * use ELCR to set PIC-mode trigger type for SCI * * If a PIC-mode SCI is not recognized or gives spurious IRQ7's * it may require Edge Trigger -- use "acpi_sci=edge" * * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge. * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0) * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0) */ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) { unsigned int mask = 1 << irq; unsigned int old, new; /* Real old ELCR mask */ old = inb(0x4d0) | (inb(0x4d1) << 8); /* * If we use ACPI to set PCI irq's, then we should clear ELCR * since we will set it correctly as we enable the PCI irq * routing. */ new = acpi_noirq ? old : 0; /* * Update SCI information in the ELCR, it isn't in the PCI * routing tables.. */ switch (trigger) { case 1: /* Edge - clear */ new &= ~mask; break; case 3: /* Level - set */ new |= mask; break; } if (old == new) return; printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old); outb(new, 0x4d0); outb(new >> 8, 0x4d1); } #endif /* CONFIG_ACPI_BUS */ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { #ifdef CONFIG_X86_IO_APIC if (use_pci_vector() && !platform_legacy_irq(gsi)) *irq = IO_APIC_VECTOR(gsi); else #endif *irq = gsi; return 0; } unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { unsigned int irq; unsigned int plat_gsi = gsi; #ifdef CONFIG_PCI /* * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { extern void eisa_set_level_irq(unsigned int irq); if (edge_level == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } #endif #ifdef CONFIG_X86_IO_APIC if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low); } #endif acpi_gsi_to_irq(plat_gsi, &irq); return irq; } EXPORT_SYMBOL(acpi_register_gsi); /* * ACPI based hotplug support for CPU */ #ifdef CONFIG_ACPI_HOTPLUG_CPU int acpi_map_lsapic(acpi_handle handle, int *pcpu) { /* TBD */ return -EINVAL; } EXPORT_SYMBOL(acpi_map_lsapic); int acpi_unmap_lsapic(int cpu) { /* TBD */ return -EINVAL; } EXPORT_SYMBOL(acpi_unmap_lsapic); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { /* TBD */ return -EINVAL; } EXPORT_SYMBOL(acpi_register_ioapic); int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { /* TBD */ return -EINVAL; } EXPORT_SYMBOL(acpi_unregister_ioapic); static unsigned long __init acpi_scan_rsdp ( unsigned long start, unsigned long length) { unsigned long offset = 0; unsigned long sig_len = sizeof("RSD PTR ") - 1; /* * Scan all 16-byte boundaries of the physical memory region for the * RSDP signature. */ for (offset = 0; offset < length; offset += 16) { if (strncmp((char *) (start + offset), "RSD PTR ", sig_len)) continue; return (start + offset); } return 0; } static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) { struct acpi_table_sbf *sb; if (!phys_addr || !size) return -EINVAL; sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size); if (!sb) { printk(KERN_WARNING PREFIX "Unable to map SBF\n"); return -ENODEV; } sbf_port = sb->sbf_cmos; /* Save CMOS port */ return 0; } #ifdef CONFIG_HPET_TIMER static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) { struct acpi_table_hpet *hpet_tbl; if (!phys || !size) return -EINVAL; hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size); if (!hpet_tbl) { printk(KERN_WARNING PREFIX "Unable to map HPET\n"); return -ENODEV; } if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) { printk(KERN_WARNING PREFIX "HPET timers must be located in " "memory.\n"); return -1; } #ifdef CONFIG_X86_64 vxtime.hpet_address = hpet_tbl->addr.addrl | ((long) hpet_tbl->addr.addrh << 32); printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", hpet_tbl->id, vxtime.hpet_address); #else /* X86 */ { extern unsigned long hpet_address; hpet_address = hpet_tbl->addr.addrl; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", hpet_tbl->id, hpet_address); } #endif /* X86 */ return 0; } #else #define acpi_parse_hpet NULL #endif #ifdef CONFIG_X86_PM_TIMER extern u32 pmtmr_ioport; #endif static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) { struct fadt_descriptor_rev2 *fadt = NULL; fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size); if(!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; } #ifdef CONFIG_ACPI_INTERPRETER /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; #endif #ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; #endif #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ if (fadt->revision >= FADT2_REVISION_ID) { /* FADT rev. 2 */ if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO) return 0; pmtmr_ioport = fadt->xpm_tmr_blk.address; } else { /* FADT rev. 1 */ pmtmr_ioport = fadt->V1_pm_tmr_blk; } if (pmtmr_ioport) printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport); #endif return 0; } unsigned long __init acpi_find_rsdp (void) { unsigned long rsdp_phys = 0; if (efi_enabled) { if (efi.acpi20) return __pa(efi.acpi20); else if (efi.acpi) return __pa(efi.acpi); } /* * Scan memory looking for the RSDP signature. First search EBDA (low * memory) paragraphs and then search upper memory (E0000-FFFFF). */ rsdp_phys = acpi_scan_rsdp (0, 0x400); if (!rsdp_phys) rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000); return rsdp_phys; } #ifdef CONFIG_X86_LOCAL_APIC /* * Parse LAPIC entries in MADT * returns 0 on success, < 0 on error */ static int __init acpi_parse_madt_lapic_entries(void) { int count; /* * Note that the LAPIC address is obtained from the MADT (32-bit value) * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). */ count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); return count; } mp_register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic, MAX_APICS); if (!count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); /* TBD: Cleanup to allow fallback to MPS */ return -ENODEV; } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } return 0; } #endif /* CONFIG_X86_LOCAL_APIC */ #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error */ static int __init acpi_parse_madt_ioapic_entries(void) { int count; /* * ACPI interpreter is required to complete interrupt setup, * so if it is off, don't enumerate the io-apics with ACPI. * If MPS is present, it will handle them, * otherwise the system will stay in PIC mode */ if (acpi_disabled || acpi_noirq) { return -ENODEV; } /* * if "noapic" boot option, don't look for IO-APICs */ if (skip_ioapic_setup) { printk(KERN_INFO PREFIX "Skipping IOAPIC probe " "due to 'noapic' option.\n"); return -ENODEV; } count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS); if (!count) { printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); return -ENODEV; } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); return count; } count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } /* * If BIOS did not supply an INT_SRC_OVR for the SCI * pretend we got one so we can set the SCI flags. */ if (!acpi_sci_override_gsi) acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0); /* Fill in identity legacy mapings where no override */ mp_config_acpi_legacy_irqs(); count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } return 0; } #else static inline int acpi_parse_madt_ioapic_entries(void) { return -1; } #endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */ static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC int count, error; count = acpi_table_parse(ACPI_APIC, acpi_parse_madt); if (count >= 1) { /* * Parse MADT LAPIC entries */ error = acpi_parse_madt_lapic_entries(); if (!error) { acpi_lapic = 1; #ifdef CONFIG_X86_GENERICARCH generic_bigsmp_probe(); #endif /* * Parse MADT IO-APIC entries */ error = acpi_parse_madt_ioapic_entries(); if (!error) { acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC; acpi_irq_balance_set(NULL); acpi_ioapic = 1; smp_found_config = 1; clustered_apic_check(); } } if (error == -EINVAL) { /* * Dell Precision Workstation 410, 610 come here. */ printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n"); disable_acpi(); } } #endif return; } extern int acpi_force; #ifdef __i386__ #ifdef CONFIG_ACPI_PCI static int __init disable_acpi_irq(struct dmi_system_id *d) { if (!acpi_force) { printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", d->ident); acpi_noirq_set(); } return 0; } static int __init disable_acpi_pci(struct dmi_system_id *d) { if (!acpi_force) { printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", d->ident); acpi_disable_pci(); } return 0; } #endif static int __init dmi_disable_acpi(struct dmi_system_id *d) { if (!acpi_force) { printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); disable_acpi(); } else { printk(KERN_NOTICE "Warning: DMI blacklist says broken, but acpi forced\n"); } return 0; } /* * Limit ACPI to CPU enumeration for HT */ static int __init force_acpi_ht(struct dmi_system_id *d) { if (!acpi_force) { printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); disable_acpi(); acpi_ht = 1; } else { printk(KERN_NOTICE "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); } return 0; } /* * If your system is blacklisted here, but you find that acpi=force * works for you, please contact acpi-devel@sourceforge.net */ static struct dmi_system_id __initdata acpi_dmi_table[] = { /* * Boxes that need ACPI disabled */ { .callback = dmi_disable_acpi, .ident = "IBM Thinkpad", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), }, }, /* * Boxes that need acpi=ht */ { .callback = force_acpi_ht, .ident = "FSC Primergy T850", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), }, }, { .callback = force_acpi_ht, .ident = "DELL GX240", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), }, }, { .callback = force_acpi_ht, .ident = "HP VISUALIZE NT Workstation", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), }, }, { .callback = force_acpi_ht, .ident = "Compaq Workstation W8000", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), }, }, { .callback = force_acpi_ht, .ident = "ASUS P4B266", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "P4B266"), }, }, { .callback = force_acpi_ht, .ident = "ASUS P2B-DS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), }, }, { .callback = force_acpi_ht, .ident = "ASUS CUR-DLS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), }, }, { .callback = force_acpi_ht, .ident = "ABIT i440BX-W83977", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ABIT "), DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), }, }, { .callback = force_acpi_ht, .ident = "IBM Bladecenter", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), }, }, { .callback = force_acpi_ht, .ident = "IBM eServer xSeries 360", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), }, }, { .callback = force_acpi_ht, .ident = "IBM eserver xSeries 330", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), }, }, { .callback = force_acpi_ht, .ident = "IBM eserver xSeries 440", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), }, }, #ifdef CONFIG_ACPI_PCI /* * Boxes that need ACPI PCI IRQ routing disabled */ { .callback = disable_acpi_irq, .ident = "ASUS A7V", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), DMI_MATCH(DMI_BOARD_NAME, ""), /* newer BIOS, Revision 1011, does work */ DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), }, }, /* * Boxes that need ACPI PCI IRQ routing and PCI scan disabled */ { /* _BBN 0 bug */ .callback = disable_acpi_pci, .ident = "ASUS PR-DLS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") }, }, { .callback = disable_acpi_pci, .ident = "Acer TravelMate 36x Laptop", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), }, }, #endif { } }; #endif /* __i386__ */ /* * acpi_boot_table_init() and acpi_boot_init() * called from setup_arch(), always. * 1. checksums all tables * 2. enumerates lapics * 3. enumerates io-apics * * acpi_table_init() is separate to allow reading SRAT without * other side effects. * * side effects of acpi_boot_init: * acpi_lapic = 1 if LAPIC found * acpi_ioapic = 1 if IOAPIC found * if (acpi_lapic && acpi_ioapic) smp_found_config = 1; * if acpi_blacklisted() acpi_disabled = 1; * acpi_irq_model=... * ... * * return value: (currently ignored) * 0: success * !0: failure */ int __init acpi_boot_table_init(void) { int error; #ifdef __i386__ dmi_check_system(acpi_dmi_table); #endif /* * If acpi_disabled, bail out * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) return 1; /* * Initialize the ACPI boot-time table parser. */ error = acpi_table_init(); if (error) { disable_acpi(); return error; } #ifdef __i386__ check_acpi_pci(); #endif acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); /* * blacklist may disable ACPI entirely */ error = acpi_blacklisted(); if (error) { if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); disable_acpi(); return error; } } return 0; } int __init acpi_boot_init(void) { /* * If acpi_disabled, bail out * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) return 1; acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); /* * set sci_int and PM timer address */ acpi_table_parse(ACPI_FADT, acpi_parse_fadt); /* * Process the Multiple APIC Description Table (MADT), if present */ acpi_process_madt(); acpi_table_parse(ACPI_HPET, acpi_parse_hpet); return 0; }