config MIPS bool default y # Horrible source of confusion. Die, die, die ... select EMBEDDED config MIPS64 bool "64-bit kernel" help Select this option if you want to build a 64-bit kernel. You should only select this option if you have hardware that actually has a 64-bit processor and if your application will actually benefit from 64-bit processing, otherwise say N. You must say Y for kernels for SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N. config 64BIT def_bool MIPS64 config MIPS32 bool depends on MIPS64 = 'n' default y mainmenu "Linux/MIPS Kernel Configuration" source "init/Kconfig" menu "Machine selection" config MACH_JAZZ bool "Support for the Jazz family of machines" select ARC select ARC32 select GENERIC_ISA_DMA select I8259 select ISA help This a family of machines based on the MIPS R4030 chipset which was used by several vendors to build RISC/os and Windows NT workstations. Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and Olivetti M700-10 workstations. config ACER_PICA_61 bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" depends on MACH_JAZZ && EXPERIMENTAL select DMA_NONCOHERENT help This is a machine with a R4400 133/150 MHz CPU. To compile a Linux kernel that runs on these, say Y here. For details about Linux on the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at . config MIPS_MAGNUM_4000 bool "Support for MIPS Magnum 4000" depends on MACH_JAZZ select DMA_NONCOHERENT help This is a machine with a R4000 100 MHz CPU. To compile a Linux kernel that runs on these, say Y here. For details about Linux on the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at . config OLIVETTI_M700 bool "Support for Olivetti M700-10" depends on MACH_JAZZ select DMA_NONCOHERENT help This is a machine with a R4000 100 MHz CPU. To compile a Linux kernel that runs on these, say Y here. For details about Linux on the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at . config MACH_VR41XX bool "Support for NEC VR41XX-based machines" config NEC_CMBVR4133 bool "Support for NEC CMB-VR4133" depends on MACH_VR41XX select CPU_VR41XX select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI select PCI_VR41XX config ROCKHOPPER bool "Support for Rockhopper baseboard" depends on NEC_CMBVR4133 select I8259 select HAVE_STD_PC_SERIAL_PORT config CASIO_E55 bool "Support for CASIO CASSIOPEIA E-10/15/55/65" depends on MACH_VR41XX select DMA_NONCOHERENT select IRQ_CPU select ISA config IBM_WORKPAD bool "Support for IBM WorkPad z50" depends on MACH_VR41XX select DMA_NONCOHERENT select IRQ_CPU select ISA config TANBAC_TB0226 bool "Support for TANBAC TB0226 (Mbase)" depends on MACH_VR41XX select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU help The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC. Please refer to about Mbase. config TANBAC_TB0229 bool "Support for TANBAC TB0229 (VR4131DIMM)" depends on MACH_VR41XX select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU help The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC. Please refer to about VR4131DIMM. config VICTOR_MPC30X bool "Support for Victor MP-C303/304" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU depends on MACH_VR41XX config ZAO_CAPCELLA bool "Support for ZAO Networks Capcella" depends on MACH_VR41XX select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU config PCI_VR41XX bool "Add PCI control unit support of NEC VR4100 series" depends on MACH_VR41XX && PCI config VRC4171 tristate "Add NEC VRC4171 companion chip support" depends on MACH_VR41XX && ISA ---help--- The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121. config VRC4173 tristate "Add NEC VRC4173 companion chip support" depends on MACH_VR41XX && PCI_VR41XX ---help--- The NEC VRC4173 is a companion chip for NEC VR4122/VR4131. config TOSHIBA_JMR3927 bool "Support for Toshiba JMR-TX3927 board" depends on MIPS32 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE config MIPS_COBALT bool "Support for Cobalt Server (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI select I8259 select IRQ_CPU config MACH_DECSTATION bool "Support for DECstations" select BOOT_ELF32 select DMA_NONCOHERENT select IRQ_CPU depends on MIPS32 || EXPERIMENTAL ---help--- This enables support for DEC's MIPS based workstations. For details see the Linux/MIPS FAQ on and the DECstation porting pages on . If you have one of the following DECstation Models you definitely want to choose R4xx0 for the CPU Type: DECstation 5000/50 DECstation 5000/150 DECstation 5000/260 DECsystem 5900/260 otherwise choose R3000. config MIPS_EV64120 bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 help This is an evaluation board based on the Galileo GT-64120 single-chip system controller that contains a MIPS R5000 compatible core running at 75/100MHz. Their website is located at . Say Y here if you wish to build a kernel for this platform. config EVB_PCI1 bool "Enable Second PCI (PCI1)" depends on MIPS_EV64120 config MIPS_EV96100 bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select MIPS_GT96100 select RM7000_CPU_SCACHE select SWAP_IO_SPACE help This is an evaluation board based on the Galileo GT-96100 LAN/WAN communications controllers containing a MIPS R5000 compatible core running at 83MHz. Their website is . Say Y here if you wish to build a kernel for this platform. config MIPS_IVR bool "Support for Globespan IVR board" select DMA_NONCOHERENT select HW_HAS_PCI help This is an evaluation board built by Globespan to showcase thir iVR (Internet Video Recorder) design. It utilizes a QED RM5231 R5000 MIPS core. More information can be found out their website located at . Say Y here if you wish to build a kernel for this platform. config LASAT bool "Support for LASAT Networks platforms" select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 select R5000_CPU_SCACHE config PICVUE tristate "PICVUE LCD display driver" depends on LASAT config PICVUE_PROC tristate "PICVUE LCD display driver /proc interface" depends on PICVUE config DS1603 bool "DS1603 RTC driver" depends on LASAT config LASAT_SYSCTL bool "LASAT sysctl interface" depends on LASAT config MIPS_ITE8172 bool "Support for ITE 8172G board" select DMA_NONCOHERENT select HW_HAS_PCI help Ths is an evaluation board made by ITE with ATX form factor that utilizes a MIPS R5000 to work with its ITE8172G companion internet appliance chip. The MIPS core can be either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build a kernel for this platform. config IT8172_REVC bool "Support for older IT8172 (Rev C)" depends on MIPS_ITE8172 help Say Y here to support the older, Revision C version of the Integrated Technology Express, Inc. ITE8172 SBC. Vendor page at ; picture of the board at . config MIPS_ATLAS bool "Support for MIPS Atlas board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 select SWAP_IO_SPACE help This enables support for the QED R5231-based MIPS Atlas evaluation board. config MIPS_MALTA bool "Support for MIPS Malta board" select BOOT_ELF32 select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT select GENERIC_ISA_DMA select HW_HAS_PCI select I8259 select MIPS_GT64120 select SWAP_IO_SPACE help This enables support for the VR5000-based MIPS Malta evaluation board. config MIPS_SEAD bool "Support for MIPS SEAD board (EXPERIMENTAL)" depends on EXPERIMENTAL select IRQ_CPU select DMA_NONCOHERENT config MOMENCO_OCELOT bool "Support for Momentum Ocelot board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K select MIPS_GT64120 select RM7000_CPU_SCACHE select SWAP_IO_SPACE help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . config MOMENCO_OCELOT_G bool "Support for Momentum Ocelot-G board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . config MOMENCO_OCELOT_C bool "Support for Momentum Ocelot-C board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_MV64340 select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . config MOMENCO_OCELOT_3 bool "Support for Momentum Ocelot-3 board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K select IRQ_MV64340 select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE help The Ocelot-3 is based off Discovery III System Controller and PMC-Sierra Rm79000 core. config MOMENCO_JAGUAR_ATX bool "Support for Momentum Jaguar board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K select IRQ_MV64340 select LIMITED_DMA select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE help The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . config JAGUAR_DMALOW bool "Low DMA Mode" depends on MOMENCO_JAGUAR_ATX help Select to Y if jump JP5 is set on your board, N otherwise. Normally the jumper is set, so if you feel unsafe, just say Y. config PMC_YOSEMITE bool "Support for PMC-Sierra Yosemite eval board" select DMA_COHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K select IRQ_CPU_RM9K select SWAP_IO_SPACE help Yosemite is an evaluation board for the RM9000x2 processor manufactured by PMC-Sierra config HYPERTRANSPORT bool "Hypertransport Support for PMC-Sierra Yosemite" depends on PMC_YOSEMITE config DDB5074 bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HAVE_STD_PC_SERIAL_PORT select HW_HAS_PCI select IRQ_CPU select I8259 select ISA help This enables support for the VR5000-based NEC DDB Vrc-5074 evaluation board. config DDB5476 bool "Support for NEC DDB Vrc-5476" select DMA_NONCOHERENT select HAVE_STD_PC_SERIAL_PORT select HW_HAS_PCI select IRQ_CPU select I8259 select ISA help This enables support for the R5432-based NEC DDB Vrc-5476 evaluation board. Features : kernel debugging, serial terminal, NFS root fs, on-board ether port USB, AC97, PCI, PCI VGA card & framebuffer console, IDE controller, PS2 keyboard, PS2 mouse, etc. config DDB5477 bool "Support for NEC DDB Vrc-5477" select DMA_NONCOHERENT select HW_HAS_PCI select I8259 select IRQ_CPU help This enables support for the R5432-based NEC DDB Vrc-5477, or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. Features : kernel debugging, serial terminal, NFS root fs, on-board ether port USB, AC97, PCI, etc. config DDB5477_BUS_FREQUENCY int "bus frequency (in kHZ, 0 for auto-detect)" depends on DDB5477 default 0 config NEC_OSPREY bool "Support for NEC Osprey board" select DMA_NONCOHERENT select IRQ_CPU config SGI_IP22 bool "Support for SGI IP22 (Indy/Indigo2)" select ARC select ARC32 select BOOT_ELF32 select DMA_NONCOHERENT select IP22_CPU_SCACHE select IRQ_CPU select SWAP_IO_SPACE help This are the SGI Indy, Challenge S and Indigo2, as well as certain OEM variants like the Tandem CMN B006S. To compile a Linux kernel that runs on these, say Y here. config SGI_IP27 bool "Support for SGI IP27 (Origin200/2000)" depends on MIPS64 select ARC select ARC64 select DMA_IP27 select HW_HAS_PCI select PCI_DOMAINS help This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics workstations. To compile a Linux kernel that runs on these, say Y here. #config SGI_SN0_XXL # bool "IP27 XXL" # depends on SGI_IP27 # This options adds support for userspace processes upto 16TB size. # Normally the limit is just .5TB. config SGI_SN0_N_MODE bool "IP27 N-Mode" depends on SGI_IP27 help The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be configured in either N-Modes which allows for more nodes or M-Mode which allows for more memory. Your system is most probably running in M-Mode, so you should say N here. config DISCONTIGMEM bool default y if SGI_IP27 help Say Y to upport efficient handling of discontiguous physical memory, for architectures which are either NUMA (Non-Uniform Memory Access) or have huge holes in the physical address space for other reasons. See for more. config NUMA bool "NUMA Support" depends on SGI_IP27 help Say Y to compile the kernel to support NUMA (Non-Uniform Memory Access). This option is for configuring high-end multiprocessor server machines. If in doubt, say N. config MAPPED_KERNEL bool "Mapped kernel support" depends on SGI_IP27 help Change the way a Linux kernel is loaded into memory on a MIPS64 machine. This is required in order to support text replication and NUMA. If you need to understand it, read the source code. config REPLICATE_KTEXT bool "Kernel text replication support" depends on SGI_IP27 help Say Y here to enable replicating the kernel text across multiple nodes in a NUMA cluster. This trades memory for speed. config REPLICATE_EXHANDLERS bool "Exception handler replication support" depends on SGI_IP27 help Say Y here to enable replicating the kernel exception handlers across multiple nodes in a NUMA cluster. This trades memory for speed. config SGI_IP32 bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" depends on MIPS64 && EXPERIMENTAL select ARC select ARC32 select BOOT_ELF32 select OWN_DMA select DMA_IP32 select DMA_NONCOHERENT select HW_HAS_PCI select R5000_CPU_SCACHE select RM7000_CPU_SCACHE help If you want this kernel to run on SGI O2 workstation, say Y here. config SOC_AU1X00 depends on MIPS32 bool "Support for AMD/Alchemy Au1X00 SOCs" choice prompt "Au1X00 SOC Type" depends on SOC_AU1X00 help Say Y here to enable support for one of three AMD/Alchemy SOCs. For additional documentation see www.amd.com. config SOC_AU1000 bool "SOC_AU1000" config SOC_AU1100 bool "SOC_AU1100" config SOC_AU1500 bool "SOC_AU1500" config SOC_AU1550 bool "SOC_AU1550" endchoice choice prompt "AMD/Alchemy Au1x00 board support" depends on SOC_AU1X00 help These are evaluation boards built by AMD/Alchemy to showcase their Au1X00 Internet Edge Processors. The SOC design is based on the MIPS32 architecture running at 266/400/500MHz with many integrated peripherals. Further information can be found at their website, . Say Y here if you wish to build a kernel for this platform. config MIPS_PB1000 bool "PB1000 board" depends on SOC_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE config MIPS_PB1100 bool "PB1100 board" depends on SOC_AU1100 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE config MIPS_PB1500 bool "PB1500 board" depends on SOC_AU1500 select DMA_COHERENT select HW_HAS_PCI config MIPS_PB1550 bool "PB1550 board" depends on SOC_AU1550 select DMA_COHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE config MIPS_DB1000 bool "DB1000 board" depends on SOC_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI config MIPS_DB1100 bool "DB1100 board" depends on SOC_AU1100 select DMA_NONCOHERENT config MIPS_DB1500 bool "DB1500 board" depends on SOC_AU1500 select DMA_COHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE config MIPS_DB1550 bool "DB1550 board" depends on SOC_AU1550 select HW_HAS_PCI select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE config MIPS_BOSPORUS bool "Bosporus board" depends on SOC_AU1500 select DMA_NONCOHERENT config MIPS_MIRAGE bool "Mirage board" depends on SOC_AU1500 select DMA_NONCOHERENT config MIPS_XXS1500 bool "MyCable XXS1500 board" depends on SOC_AU1500 select DMA_NONCOHERENT config MIPS_MTX1 bool "4G Systems MTX-1 board" depends on SOC_AU1500 select HW_HAS_PCI select DMA_NONCOHERENT endchoice config SIBYTE_SB1xxx_SOC bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT select SWAP_IO_SPACE choice prompt "BCM1xxx SOC-based board" depends on SIBYTE_SB1xxx_SOC default SIBYTE_SWARM help Enable support for boards based on the SiByte line of SOCs from Broadcom. There are configurations for the known evaluation boards, or you can choose "Other" and add your own board support code. config SIBYTE_SWARM bool "BCM91250A-SWARM" select SIBYTE_SB1250 config SIBYTE_SENTOSA bool "BCM91250E-Sentosa" select SIBYTE_SB1250 config SIBYTE_RHONE bool "BCM91125E-Rhone" select SIBYTE_BCM1125H config SIBYTE_CARMEL bool "BCM91120x-Carmel" select SIBYTE_BCM1120 config SIBYTE_PTSWARM bool "BCM91250PT-PTSWARM" select SIBYTE_SB1250 config SIBYTE_LITTLESUR bool "BCM91250C2-LittleSur" select SIBYTE_SB1250 config SIBYTE_CRHINE bool "BCM91120C-CRhine" select SIBYTE_BCM1120 config SIBYTE_CRHONE bool "BCM91125C-CRhone" select SIBYTE_BCM1125 config SIBYTE_UNKNOWN bool "Other" endchoice config SIBYTE_BOARD bool depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN default y choice prompt "BCM1xxx SOC Type" depends on SIBYTE_UNKNOWN default SIBYTE_UNK_BCM1250 help Since you haven't chosen a known evaluation board from Broadcom, you must explicitly pick the SOC this kernel is targetted for. config SIBYTE_UNK_BCM1250 bool "BCM1250" select SIBYTE_SB1250 config SIBYTE_UNK_BCM1120 bool "BCM1120" select SIBYTE_BCM1120 config SIBYTE_UNK_BCM1125 bool "BCM1125" select SIBYTE_BCM1125 config SIBYTE_UNK_BCM1125H bool "BCM1125H" select SIBYTE_BCM1125H endchoice config SIBYTE_SB1250 bool select HW_HAS_PCI config SIBYTE_BCM1120 bool select SIBYTE_BCM112X config SIBYTE_BCM1125 bool select HW_HAS_PCI select SIBYTE_BCM112X config SIBYTE_BCM1125H bool select HW_HAS_PCI select SIBYTE_BCM112X config SIBYTE_BCM112X bool choice prompt "SiByte SOC Stepping" depends on SIBYTE_SB1xxx_SOC config CPU_SB1_PASS_1 bool "1250 Pass1" depends on SIBYTE_SB1250 select CPU_HAS_PREFETCH config CPU_SB1_PASS_2_1250 bool "1250 An" depends on SIBYTE_SB1250 select CPU_SB1_PASS_2 help Also called BCM1250 Pass 2 config CPU_SB1_PASS_2_2 bool "1250 Bn" depends on SIBYTE_SB1250 select CPU_HAS_PREFETCH help Also called BCM1250 Pass 2.2 config CPU_SB1_PASS_4 bool "1250 Cn" depends on SIBYTE_SB1250 select CPU_HAS_PREFETCH help Also called BCM1250 Pass 3 config CPU_SB1_PASS_2_112x bool "112x Hybrid" depends on SIBYTE_BCM112X select CPU_SB1_PASS_2 config CPU_SB1_PASS_3 bool "112x An" depends on SIBYTE_BCM112X select CPU_HAS_PREFETCH endchoice config CPU_SB1_PASS_2 bool config SIBYTE_HAS_LDT bool depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H) default y config SIMULATION bool "Running under simulation" depends on SIBYTE_SB1xxx_SOC help Build a kernel suitable for running under the GDB simulator. Primarily adjusts the kernel's notion of time. config SIBYTE_CFE bool "Booting from CFE" depends on SIBYTE_SB1xxx_SOC help Make use of the CFE API for enumerating available memory, controlling secondary CPUs, and possibly console output. config SIBYTE_CFE_CONSOLE bool "Use firmware console" depends on SIBYTE_CFE help Use the CFE API's console write routines during boot. Other console options (VT console, sb1250 duart console, etc.) should not be configured. config SIBYTE_STANDALONE bool depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE default y config SIBYTE_STANDALONE_RAM_SIZE int "Memory size (in megabytes)" depends on SIBYTE_STANDALONE default "32" config SIBYTE_BUS_WATCHER bool "Support for Bus Watcher statistics" depends on SIBYTE_SB1xxx_SOC help Handle and keep statistics on the bus error interrupts (COR_ECC, BAD_ECC, IO_BUS). config SIBYTE_BW_TRACE bool "Capture bus trace before bus error" depends on SIBYTE_BUS_WATCHER help Run a continuous bus trace, dumping the raw data as soon as a ZBbus error is detected. Cannot work if ZBbus profiling is turned on, and also will interfere with JTAG-based trace buffer activity. Raw buffer data is dumped to console, and must be processed off-line. config SIBYTE_SB1250_PROF bool "Support for SB1/SOC profiling - SB1/SCD perf counters" depends on SIBYTE_SB1xxx_SOC config SIBYTE_TBPROF bool "Support for ZBbus profiling" depends on SIBYTE_SB1xxx_SOC config SNI_RM200_PCI bool "Support for SNI RM200 PCI" select ARC select ARC32 select BOOT_ELF32 select DMA_NONCOHERENT select GENERIC_ISA_DMA select HAVE_STD_PC_SERIAL_PORT select HW_HAS_PCI select I8259 select ISA help The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid Technology and now in turn merged with Fujitsu. Say Y here to support this machine type. config TOSHIBA_RBTX4927 bool "Support for Toshiba TBTX49[23]7 board" depends on MIPS32 select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI select I8259 select ISA select SWAP_IO_SPACE help This Toshiba board is based on the TX4927 processor. Say Y here to support this machine type config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on TOSHIBA_RBTX4927 config RWSEM_GENERIC_SPINLOCK bool default y config RWSEM_XCHGADD_ALGORITHM bool config GENERIC_CALIBRATE_DELAY bool default y config HAVE_DEC_LOCK bool default y # # Select some configuration options automatically based on user selections. # config ARC bool depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 default y config DMA_COHERENT bool config DMA_IP27 bool config DMA_NONCOHERENT bool config EARLY_PRINTK bool depends on MACH_DECSTATION default y config GENERIC_ISA_DMA bool depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA default y config I8259 bool depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT default y config LIMITED_DMA bool select HIGHMEM config MIPS_BONITO64 bool depends on MIPS_ATLAS || MIPS_MALTA default y config MIPS_MSC bool depends on MIPS_ATLAS || MIPS_MALTA default y config MIPS_NILE4 bool depends on LASAT default y config MIPS_DISABLE_OBSOLETE_IDE bool config CPU_LITTLE_ENDIAN bool "Generate little endian code" default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 help Some MIPS machines can be configured for either little or big endian byte order. These modes require different kernels. Say Y if your machine is little endian, N if it's a big endian machine. config IRQ_CPU bool config IRQ_CPU_RM7K bool config IRQ_MV64340 bool config DDB5XXX_COMMON bool depends on DDB5074 || DDB5476 || DDB5477 default y config MIPS_BOARDS_GEN bool depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD default y config MIPS_GT64111 bool depends on MIPS_COBALT default y config MIPS_GT64120 bool depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT default y config MIPS_TX3927 bool depends on TOSHIBA_JMR3927 select HAS_TXX9_SERIAL default y config PCI_MARVELL bool config ITE_BOARD_GEN bool depends on MIPS_IVR || MIPS_ITE8172 default y config SWAP_IO_SPACE bool # # Unfortunately not all GT64120 systems run the chip at the same clock. # As the user for the clock rate and try to minimize the available options. # choice prompt "Galileo Chip Clock" #default SYSCLK_83 if MIPS_EV64120 depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G default SYSCLK_83 if MIPS_EV64120 default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G config SYSCLK_75 bool "75" if MIPS_EV64120 config SYSCLK_83 bool "83.3" if MIPS_EV64120 config SYSCLK_100 bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G endchoice config AU1X00_USB_DEVICE bool depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 default n config MIPS_GT96100 bool depends on MIPS_EV96100 default y help Say Y here to support the Galileo Technology GT96100 communications controller card. There is a web page at . config IT8172_CIR bool depends on MIPS_ITE8172 || MIPS_IVR default y config IT8712 bool depends on MIPS_ITE8172 default y config BOOT_ELF32 bool depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI default y config MIPS_L1_CACHE_SHIFT int default "4" if MACH_DECSTATION default "7" if SGI_IP27 default "5" config ARC32 bool depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 default y config FB bool depends on MIPS_MAGNUM_4000 || OLIVETTI_M700 default y ---help--- The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through a well-defined interface, so the software doesn't need to know anything about the low-level (hardware register) stuff. Frame buffer devices work identically across the different architectures supported by Linux and make the implementation of application programs easier and more portable; at this point, an X server exists which uses the frame buffer device exclusively. On several non-X86 architectures, the frame buffer device is the only way to use the graphics hardware. The device is accessed through special device nodes, usually located in the /dev directory, i.e. /dev/fb*. You need an utility program called fbset to make full use of frame buffer devices. Please read and the Framebuffer-HOWTO at for more information. Say Y here and to the driver for your graphics board below if you are compiling a kernel for a non-x86 architecture. If you are compiling for the x86 architecture, you can say Y if you want to play with it, but it is not essential. Please note that running graphical applications that directly touch the hardware (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. config HAVE_STD_PC_SERIAL_PORT bool config VR4181 bool depends on NEC_OSPREY default y config ARC_CONSOLE bool "ARC console support" depends on SGI_IP22 || SNI_RM200_PCI config ARC_MEMORY bool depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32 default y config ARC_PROMLIB bool depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 default y config ARC64 bool depends on SGI_IP27 default y config BOOT_ELF64 bool depends on SGI_IP27 default y #config MAPPED_PCI_IO y # bool # depends on SGI_IP27 # default y config QL_ISP_A64 bool depends on SGI_IP27 default y config TOSHIBA_BOARDS bool depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 default y endmenu menu "CPU selection" choice prompt "CPU type" default CPU_R4X00 config CPU_MIPS32 bool "MIPS32" config CPU_MIPS64 bool "MIPS64" config CPU_R3000 bool "R3000" depends on MIPS32 help Please make sure to pick the right CPU type. Linux/MIPS is not designed to be generic, i.e. Kernels compiled for R3000 CPUs will *not* work on R4000 machines and vice versa. However, since most of the supported machines have an R4000 (or similar) CPU, R4x00 might be a safe bet. If the resulting kernel does not work, try to recompile with R3000. config CPU_TX39XX bool "R39XX" depends on MIPS32 config CPU_VR41XX bool "R41xx" help The options selects support for the NEC VR41xx series of processors. Only choose this option if you have one of these processors as a kernel built with this option will not run on any other type of processor or vice versa. config CPU_R4300 bool "R4300" help MIPS Technologies R4300-series processors. config CPU_R4X00 bool "R4x00" help MIPS Technologies R4000-series processors other than 4300, including the R4000, R4400, R4600, and 4700. config CPU_TX49XX bool "R49XX" config CPU_R5000 bool "R5000" help MIPS Technologies R5000-series processors other than the Nevada. config CPU_R5432 bool "R5432" config CPU_R6000 bool "R6000" depends on MIPS32 && EXPERIMENTAL help MIPS Technologies R6000 and R6000A series processors. Note these processors are extremly rare and the support for them is incomplete. config CPU_NEVADA bool "RM52xx" help QED / PMC-Sierra RM52xx-series ("Nevada") processors. config CPU_R8000 bool "R8000" depends on MIPS64 && EXPERIMENTAL help MIPS Technologies R8000 processors. Note these processors are uncommon and the support for them is incomplete. config CPU_R10000 bool "R10000" help MIPS Technologies R10000-series processors. config CPU_RM7000 bool "RM7000" config CPU_RM9000 bool "RM9000" config CPU_SB1 bool "SB1" endchoice choice prompt "Kernel page size" default PAGE_SIZE_4KB config PAGE_SIZE_4KB bool "4kB" help This option select the standard 4kB Linux page size. On some R3000-family processors this is the only available page size. Using 4kB page size will minimize memory consumption and is therefore recommended for low memory systems. config PAGE_SIZE_8KB bool "8kB" depends on EXPERIMENTAL && CPU_R8000 help Using 8kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available only on the R8000 processor. Not that at the time of this writing this option is still high experimental; there are also issues with compatibility of user applications. config PAGE_SIZE_16KB bool "16kB" depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX help Using 16kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on all non-R3000 family processor. Not that at the time of this writing this option is still high experimental; there are also issues with compatibility of user applications. config PAGE_SIZE_64KB bool "64kB" depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX help Using 64kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on all non-R3000 family processor. Not that at the time of this writing this option is still high experimental; there are also issues with compatibility of user applications. endchoice config BOARD_SCACHE bool config IP22_CPU_SCACHE bool select BOARD_SCACHE config R5000_CPU_SCACHE bool select BOARD_SCACHE config RM7000_CPU_SCACHE bool select BOARD_SCACHE config SIBYTE_DMA_PAGEOPS bool "Use DMA to clear/copy pages" depends on CPU_SB1 help Instead of using the CPU to zero and copy pages, use a Data Mover channel. These DMA channels are otherwise unused by the standard SiByte Linux port. Seems to give a small performance benefit. config CPU_HAS_PREFETCH bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2 default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 config VTAG_ICACHE bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32 default y if CPU_SB1 config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 default y config SB1_PASS_2_WORKAROUNDS bool depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) default y config SB1_PASS_2_1_WORKAROUNDS bool depends on CPU_SB1 && CPU_SB1_PASS_2 default y config 64BIT_PHYS_ADDR bool "Support for 64-bit physical address space" depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32 config CPU_ADVANCED bool "Override CPU Options" depends on MIPS32 help Saying yes here allows you to select support for various features your CPU may or may not have. Most people should say N here. config CPU_HAS_LLSC bool "ll/sc Instructions available" if CPU_ADVANCED default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX help MIPS R4000 series and later provide the Load Linked (ll) and Store Conditional (sc) instructions. More information is available at . Say Y here if your CPU has the ll and sc instructions. Say Y here for better performance, N if you don't know. You must say Y here for multiprocessor machines. config CPU_HAS_LLDSCD bool "lld/scd Instructions available" if CPU_ADVANCED default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32 help Say Y here if your CPU has the lld and scd instructions, the 64-bit equivalents of ll and sc. Say Y here for better performance, N if you don't know. You must say Y here for multiprocessor machines. config CPU_HAS_WB bool "Writeback Buffer available" if CPU_ADVANCED default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION help Say N here for slightly better performance. You must say Y here for machines which require flushing of write buffers in software. Saying Y is the safe option; N may result in kernel malfunction and crashes. config CPU_HAS_SYNC bool depends on !CPU_R3000 default y # # - Highmem only makes sense for the 32-bit kernel. # - The current highmem code will only work properly on physically indexed # caches such as R3000, SB1, R7000 or those that look like they're virtually # indexed such as R4000/R4400 SC and MC versions or R10000. So for the # moment we protect the user and offer the highmem option only on machines # where it's known to be safe. This will not offer highmem on a few systems # such as MIPS32 and MIPS64 CPUs which may have virtual and physically # indexed CPUs but we're playing safe. # - We should not offer highmem for system of which we already know that they # don't have memory configurations that could gain from highmem support in # the kernel because they don't support configurations with RAM at physical # addresses > 0x20000000. # config HIGHMEM bool "High Memory Support" depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX) config SMP bool "Multi-Processing support" depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27 ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If you have a system with more than one CPU, say Y. If you say N here, the kernel will run on single and multiprocessor machines, but will use only one CPU of a multiprocessor machine. If you say Y here, the kernel will run on many, but not all, singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. People using multiprocessor machines who say Y here should also say Y to "Enhanced Real Time Clock Support", below. See also the and the SMP-HOWTO available at . If you don't know what to do here, say N. config NR_CPUS int "Maximum number of CPUs (2-64)" range 2 64 depends on SMP default "64" if SGI_IP27 default "2" help This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 32 for 32-bit kernel and 64 for 64-bit kernels; the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. config PREEMPT bool "Preemptible Kernel" help This option reduces the latency of the kernel when reacting to real-time or interactive events by allowing a low priority process to be preempted even if it is in kernel mode executing a system call. This allows applications to run more reliably even when the system is under load. config RTC_DS1742 bool "DS1742 BRAM/RTC support" depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 config MIPS_INSANE_LARGE bool "Support for large 64-bit configurations" depends on CPU_R10000 && MIPS64 help MIPS R10000 does support a 44 bit / 16TB address space as opposed to previous 64-bit processors which only supported 40 bit / 1TB. If you need processes of more than 1TB virtual address space, say Y here. This will result in additional memory usage, so it is not recommended for normal users. config RWSEM_GENERIC_SPINLOCK bool default y endmenu menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" config HW_HAS_PCI bool config PCI bool "Support for PCI controller" depends on HW_HAS_PCI help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, say Y, otherwise N. The PCI-HOWTO, available from , contains valuable information about which PCI hardware does work under Linux and which doesn't. config PCI_DOMAINS bool depends on PCI source "drivers/pci/Kconfig" # # ISA support is now enabled via select. Too many systems still have the one # or other ISA chip on the board that users don't know about so don't expect # users to choose the right thing ... # config ISA bool config EISA bool "EISA support" depends on SGI_IP22 || SNI_RM200_PCI select ISA ---help--- The Extended Industry Standard Architecture (EISA) bus was developed as an open alternative to the IBM MicroChannel bus. The EISA bus provided some of the features of the IBM MicroChannel bus while maintaining backward compatibility with cards made for the older ISA bus. The EISA bus saw limited use between 1988 and 1995 when it was made obsolete by the PCI bus. Say Y here if you are building a kernel for an EISA-based machine. Otherwise, say N. source "drivers/eisa/Kconfig" config TC bool "TURBOchannel support" depends on MACH_DECSTATION help TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS processors. Documentation on writing device drivers for TurboChannel is available at: . #config ACCESSBUS # bool "Access.Bus support" # depends on TC config MMU bool default y config MCA bool config SBUS bool source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" endmenu menu "Executable file formats" source "fs/Kconfig.binfmt" config TRAD_SIGNALS bool default y if MIPS32 config BUILD_ELF64 bool "Use 64-bit ELF format for building" depends on MIPS64 help A 64-bit kernel is usually built using the 64-bit ELF binary object format as it's one that allows arbitrary 64-bit constructs. For kernels that are loaded within the KSEG compatibility segments the 32-bit ELF format can optionally be used resulting in a somewhat smaller binary, but this option is not explicitly supported by the toolchain and since binutils 2.14 it does not even work at all. Say Y to use the 64-bit format or N to use the 32-bit one. If unsure say Y. config BINFMT_IRIX bool "Include IRIX binary compatibility" depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN config MIPS32_COMPAT bool "Kernel support for Linux/MIPS 32-bit binary compatibility" depends on MIPS64 help Select this option if you want Linux/MIPS 32-bit binary compatibility. Since all software available for Linux/MIPS is currently 32-bit you should say Y here. config COMPAT bool depends on MIPS32_COMPAT default y config MIPS32_O32 bool "Kernel support for o32 binaries" depends on MIPS32_COMPAT help Select this option if you want to run o32 binaries. These are pure 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of existing binaries are in this format. If unsure, say Y. config MIPS32_N32 bool "Kernel support for n32 binaries" depends on MIPS32_COMPAT help Select this option if you want to run n32 binaries. These are 64-bit binaries using 32-bit quantities for addressing and certain data that would normally be 64-bit. They are used in special cases. If unsure, say N. config BINFMT_ELF32 bool default y if MIPS32_O32 || MIPS32_N32 config PM bool "Power Management support (EXPERIMENTAL)" depends on EXPERIMENTAL && MACH_AU1X00 endmenu source "drivers/Kconfig" source "fs/Kconfig" source "arch/mips/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" # # Use the generic interrupt handling code in kernel/irq/: # config GENERIC_HARDIRQS bool default y config GENERIC_IRQ_PROBE bool default y config ISA_DMA_API bool default y