/* * arch/sh/kernel/cpu/sh3/entry.S * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include #include #include #include #include #include #include #include #include ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address ! to be jumped is too far, but it causes illegal slot exception. /* * entry.S contains the system-call and fault low-level handling routines. * This also contains the timer-interrupt handler, as well as all interrupts * and faults that can result in a task-switch. * * NOTE: This code handles signal-recognition, which happens every time * after a timer-interrupt and after each system call. * * NOTE: This code uses a convention that instructions in the delay slot * of a transfer-control instruction are indented by an extra space, thus: * * jmp @k0 ! control-transfer instruction * ldc k1, ssr ! delay slot * * Stack layout in 'ret_from_syscall': * ptrace needs to have all regs on the stack. * if the order here is changed, it needs to be * updated in ptrace.c and ptrace.h * * r0 * ... * r15 = stack pointer * spc * pr * ssr * gbr * mach * macl * syscall # * */ #if defined(CONFIG_KGDB) NMI_VEC = 0x1c0 ! Must catch early for debounce #endif /* Offsets to the stack */ OFF_R0 = 0 /* Return value. New ABI also arg4 */ OFF_R1 = 4 /* New ABI: arg5 */ OFF_R2 = 8 /* New ABI: arg6 */ OFF_R3 = 12 /* New ABI: syscall_nr */ OFF_R4 = 16 /* New ABI: arg0 */ OFF_R5 = 20 /* New ABI: arg1 */ OFF_R6 = 24 /* New ABI: arg2 */ OFF_R7 = 28 /* New ABI: arg3 */ OFF_SP = (15*4) OFF_PC = (16*4) OFF_SR = (16*4+8) OFF_TRA = (16*4+6*4) #define k0 r0 #define k1 r1 #define k2 r2 #define k3 r3 #define k4 r4 #define g_imask r6 /* r6_bank1 */ #define k_g_imask r6_bank /* r6_bank1 */ #define current r7 /* r7_bank1 */ #include /* * Kernel mode register usage: * k0 scratch * k1 scratch * k2 scratch (Exception code) * k3 scratch (Return address) * k4 scratch * k5 reserved * k6 Global Interrupt Mask (0--15 << 4) * k7 CURRENT_THREAD_INFO (pointer to current thread info) */ ! ! TLB Miss / Initial Page write exception handling ! _and_ ! TLB hits, but the access violate the protection. ! It can be valid access, such as stack grow and/or C-O-W. ! ! ! Find the pmd/pte entry and loadtlb ! If it's not found, cause address error (SEGV) ! ! Although this could be written in assembly language (and it'd be faster), ! this first version depends *much* on C implementation. ! #if defined(CONFIG_MMU) .align 2 ENTRY(tlb_miss_load) bra call_handle_tlbmiss mov #0, r5 .align 2 ENTRY(tlb_miss_store) bra call_handle_tlbmiss mov #1, r5 .align 2 ENTRY(initial_page_write) bra call_handle_tlbmiss mov #2, r5 .align 2 ENTRY(tlb_protection_violation_load) bra call_do_page_fault mov #0, r5 .align 2 ENTRY(tlb_protection_violation_store) bra call_do_page_fault mov #1, r5 call_handle_tlbmiss: setup_frame_reg mov.l 1f, r0 mov r5, r8 mov.l @r0, r6 mov.l 2f, r0 sts pr, r10 jsr @r0 mov r15, r4 ! tst r0, r0 bf/s 0f lds r10, pr rts nop 0: mov r8, r5 call_do_page_fault: mov.l 1f, r0 mov.l @r0, r6 sti mov.l 3f, r0 mov.l 4f, r1 mov r15, r4 jmp @r0 lds r1, pr .align 2 1: .long MMU_TEA 2: .long handle_tlbmiss 3: .long do_page_fault 4: .long ret_from_exception .align 2 ENTRY(address_error_load) bra call_dae mov #0,r5 ! writeaccess = 0 .align 2 ENTRY(address_error_store) bra call_dae mov #1,r5 ! writeaccess = 1 .align 2 call_dae: mov.l 1f, r0 mov.l @r0, r6 ! address mov.l 2f, r0 jmp @r0 mov r15, r4 ! regs .align 2 1: .long MMU_TEA 2: .long do_address_error #endif /* CONFIG_MMU */ #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ ENTRY(sh_bios_handler) mov.l 1f, r8 bsr restore_regs nop lds k2, pr ! restore pr mov k4, r15 ! mov.l 2f, k0 mov.l @k0, k0 jmp @k0 ldc k3, ssr .align 2 1: .long 0x300000f0 2: .long gdb_vbr_vector #endif /* CONFIG_SH_STANDARD_BIOS */ ! restore_regs() ! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack ! - switch bank ! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack ! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra ! k2 returns original pr ! k3 returns original sr ! k4 returns original stack pointer ! r8 passes SR bitmask, overwritten with restored data on return ! r9 trashed ! BL=0 on entry, on exit BL=1 (depending on r8). ENTRY(restore_regs) mov.l @r15+, r0 mov.l @r15+, r1 mov.l @r15+, r2 mov.l @r15+, r3 mov.l @r15+, r4 mov.l @r15+, r5 mov.l @r15+, r6 mov.l @r15+, r7 ! stc sr, r9 or r8, r9 ldc r9, sr ! mov.l @r15+, r8 mov.l @r15+, r9 mov.l @r15+, r10 mov.l @r15+, r11 mov.l @r15+, r12 mov.l @r15+, r13 mov.l @r15+, r14 mov.l @r15+, k4 ! original stack pointer ldc.l @r15+, spc mov.l @r15+, k2 ! original PR mov.l @r15+, k3 ! original SR ldc.l @r15+, gbr lds.l @r15+, mach lds.l @r15+, macl rts add #4, r15 ! Skip syscall number restore_all: mov.l 7f, r8 bsr restore_regs nop lds k2, pr ! restore pr ! ! Calculate new SR value mov k3, k2 ! original SR value mov #0xf0, k1 extu.b k1, k1 not k1, k1 and k1, k2 ! Mask original SR value ! mov k3, k0 ! Calculate IMASK-bits shlr2 k0 and #0x3c, k0 cmp/eq #0x3c, k0 bt/s 6f shll2 k0 mov g_imask, k0 ! 6: or k0, k2 ! Set the IMASK-bits ldc k2, ssr ! #if defined(CONFIG_KGDB) ! Clear in_nmi mov.l 6f, k0 mov #0, k1 mov.b k1, @k0 #endif mov k4, r15 rte nop .align 2 5: .long 0x00001000 ! DSP #ifdef CONFIG_KGDB 6: .long in_nmi #endif 7: .long 0x30000000 ! common exception handler #include "../../entry-common.S" ! Exception Vector Base ! ! Should be aligned page boundary. ! .balign 4096,0,4096 ENTRY(vbr_base) .long 0 ! ! 0x100: General exception vector ! .balign 256,0,256 general_exception: #ifndef CONFIG_CPU_SUBTYPE_SHX3 bra handle_exception sts pr, k3 ! save original pr value in k3 #else mov.l 1f, k4 mov.l @k4, k4 ! Is EXPEVT larger than 0x800? mov #0x8, k0 shll8 k0 cmp/hs k0, k4 bf 0f ! then add 0x580 (k2 is 0xd80 or 0xda0) mov #0x58, k0 shll2 k0 shll2 k0 add k0, k4 0: ! Setup stack and save DSP context (k0 contains original r15 on return) bsr prepare_stack nop ! Save registers / Switch to bank 0 mov k4, k2 ! keep vector in k2 mov.l 1f, k4 ! SR bits to clear in k4 bsr save_regs ! needs original pr value in k3 nop bra handle_exception_special nop .align 2 1: .long EXPEVT #endif ! prepare_stack() ! - roll back gRB ! - switch to kernel stack ! k0 returns original sp (after roll back) ! k1 trashed ! k2 trashed prepare_stack: #ifdef CONFIG_GUSA ! Check for roll back gRB (User and Kernel) mov r15, k0 shll k0 bf/s 1f shll k0 bf/s 1f stc spc, k1 stc r0_bank, k0 cmp/hs k0, k1 ! test k1 (saved PC) >= k0 (saved r0) bt/s 2f stc r1_bank, k1 add #-2, k0 add r15, k0 ldc k0, spc ! PC = saved r0 + r15 - 2 2: mov k1, r15 ! SP = r1 1: #endif ! Switch to kernel stack if needed stc ssr, k0 ! Is it from kernel space? shll k0 ! Check MD bit (bit30) by shifting it into... shll k0 ! ...the T bit bt/s 1f ! It's a kernel to kernel transition. mov r15, k0 ! save original stack to k0 /* User space to kernel */ mov #(THREAD_SIZE >> 10), k1 shll8 k1 ! k1 := THREAD_SIZE shll2 k1 add current, k1 mov k1, r15 ! change to kernel stack ! 1: rts nop ! ! 0x400: Instruction and Data TLB miss exception vector ! .balign 1024,0,1024 tlb_miss: sts pr, k3 ! save original pr value in k3 handle_exception: mova exception_data, k0 ! Setup stack and save DSP context (k0 contains original r15 on return) bsr prepare_stack PREF(k0) ! Save registers / Switch to bank 0 mov.l 5f, k2 ! vector register address mov.l 1f, k4 ! SR bits to clear in k4 bsr save_regs ! needs original pr value in k3 mov.l @k2, k2 ! read out vector and keep in k2 handle_exception_special: ! Setup return address and jump to exception handler mov.l 7f, r9 ! fetch return address stc r2_bank, r0 ! k2 (vector) mov.l 6f, r10 shlr2 r0 shlr r0 mov.l @(r0, r10), r10 jmp @r10 lds r9, pr ! put return address in pr .align L1_CACHE_SHIFT ! save_regs() ! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack ! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack ! - switch bank ! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack ! k0 contains original stack pointer* ! k1 trashed ! k3 passes original pr* ! k4 passes SR bitmask ! BL=1 on entry, on exit BL=0. ENTRY(save_regs) mov #-1, r1 mov.l k1, @-r15 ! set TRA (default: -1) sts.l macl, @-r15 sts.l mach, @-r15 stc.l gbr, @-r15 stc.l ssr, @-r15 mov.l k3, @-r15 ! original pr in k3 stc.l spc, @-r15 mov.l k0, @-r15 ! original stack pointer in k0 mov.l r14, @-r15 mov.l r13, @-r15 mov.l r12, @-r15 mov.l r11, @-r15 mov.l r10, @-r15 mov.l r9, @-r15 mov.l r8, @-r15 mov.l 0f, k3 ! SR bits to set in k3 ! fall-through ! save_low_regs() ! - modify SR for bank switch ! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack ! k3 passes bits to set in SR ! k4 passes bits to clear in SR ENTRY(save_low_regs) stc sr, r8 or k3, r8 and k4, r8 ldc r8, sr mov.l r7, @-r15 mov.l r6, @-r15 mov.l r5, @-r15 mov.l r4, @-r15 mov.l r3, @-r15 mov.l r2, @-r15 mov.l r1, @-r15 rts mov.l r0, @-r15 ! ! 0x600: Interrupt / NMI vector ! .balign 512,0,512 ENTRY(handle_interrupt) #if defined(CONFIG_KGDB) mov.l 2f, k2 ! Debounce (filter nested NMI) mov.l @k2, k0 mov.l 9f, k1 cmp/eq k1, k0 bf 11f mov.l 10f, k1 tas.b @k1 bt 11f rte nop .align 2 9: .long NMI_VEC 10: .long in_nmi 11: #endif /* defined(CONFIG_KGDB) */ sts pr, k3 ! save original pr value in k3 mova exception_data, k0 ! Setup stack and save DSP context (k0 contains original r15 on return) bsr prepare_stack PREF(k0) ! Save registers / Switch to bank 0 mov.l 1f, k4 ! SR bits to clear in k4 bsr save_regs ! needs original pr value in k3 mov #-1, k2 ! default vector kept in k2 ! Setup return address and jump to do_IRQ mov.l 4f, r9 ! fetch return address lds r9, pr ! put return address in pr mov.l 2f, r4 mov.l 3f, r9 mov.l @r4, r4 ! pass INTEVT vector as arg0 jmp @r9 mov r15, r5 ! pass saved registers as arg1 ENTRY(exception_none) rts nop .align L1_CACHE_SHIFT exception_data: 0: .long 0x000080f0 ! FD=1, IMASK=15 1: .long 0xcfffffff ! RB=0, BL=0 2: .long INTEVT 3: .long do_IRQ 4: .long ret_from_irq 5: .long EXPEVT 6: .long exception_handling_table 7: .long ret_from_exception