/****************************************************************************** * * Module Name: exfield - ACPI AML (p-code) execution - field manipulation * *****************************************************************************/ /* * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include #include #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME("exfield") /******************************************************************************* * * FUNCTION: acpi_ex_read_data_from_field * * PARAMETERS: walk_state - Current execution state * obj_desc - The named field * ret_buffer_desc - Where the return data object is stored * * RETURN: Status * * DESCRIPTION: Read from a named field. Returns either an Integer or a * Buffer, depending on the size of the field. * ******************************************************************************/ acpi_status acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, union acpi_operand_object *obj_desc, union acpi_operand_object **ret_buffer_desc) { acpi_status status; union acpi_operand_object *buffer_desc; acpi_size length; void *buffer; ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); /* Parameter validation */ if (!obj_desc) { return_ACPI_STATUS(AE_AML_NO_OPERAND); } if (!ret_buffer_desc) { return_ACPI_STATUS(AE_BAD_PARAMETER); } if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_BUFFER_FIELD) { /* * If the buffer_field arguments have not been previously evaluated, * evaluate them now and save the results. */ if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { status = acpi_ds_get_buffer_field_arguments(obj_desc); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } } else if ((ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) && (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) { /* * This is an SMBus read. We must create a buffer to hold the data * and directly access the region handler. */ buffer_desc = acpi_ut_create_buffer_object(ACPI_SMBUS_BUFFER_SIZE); if (!buffer_desc) { return_ACPI_STATUS(AE_NO_MEMORY); } /* Lock entire transaction if requested */ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); /* * Perform the read. * Note: Smbus protocol value is passed in upper 16-bits of Function */ status = acpi_ex_access_region(obj_desc, 0, ACPI_CAST_PTR(acpi_integer, buffer_desc-> buffer.pointer), ACPI_READ | (obj_desc->field. attribute << 16)); acpi_ex_release_global_lock(); goto exit; } /* * Allocate a buffer for the contents of the field. * * If the field is larger than the size of an acpi_integer, create * a BUFFER to hold it. Otherwise, use an INTEGER. This allows * the use of arithmetic operators on the returned value if the * field size is equal or smaller than an Integer. * * Note: Field.length is in bits. */ length = (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length); if (length > acpi_gbl_integer_byte_width) { /* Field is too large for an Integer, create a Buffer instead */ buffer_desc = acpi_ut_create_buffer_object(length); if (!buffer_desc) { return_ACPI_STATUS(AE_NO_MEMORY); } buffer = buffer_desc->buffer.pointer; } else { /* Field will fit within an Integer (normal case) */ buffer_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); if (!buffer_desc) { return_ACPI_STATUS(AE_NO_MEMORY); } length = acpi_gbl_integer_byte_width; buffer_desc->integer.value = 0; buffer = &buffer_desc->integer.value; } ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", obj_desc, ACPI_GET_OBJECT_TYPE(obj_desc), buffer, (u32) length)); ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", obj_desc->common_field.bit_length, obj_desc->common_field.start_field_bit_offset, obj_desc->common_field.base_byte_offset)); /* Lock entire transaction if requested */ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); /* Read from the field */ status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length); acpi_ex_release_global_lock(); exit: if (ACPI_FAILURE(status)) { acpi_ut_remove_reference(buffer_desc); } else { *ret_buffer_desc = buffer_desc; } return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ex_write_data_to_field * * PARAMETERS: source_desc - Contains data to write * obj_desc - The named field * result_desc - Where the return value is returned, if any * * RETURN: Status * * DESCRIPTION: Write to a named field * ******************************************************************************/ acpi_status acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, union acpi_operand_object *obj_desc, union acpi_operand_object **result_desc) { acpi_status status; u32 length; u32 required_length; void *buffer; void *new_buffer; union acpi_operand_object *buffer_desc; ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); /* Parameter validation */ if (!source_desc || !obj_desc) { return_ACPI_STATUS(AE_AML_NO_OPERAND); } if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_BUFFER_FIELD) { /* * If the buffer_field arguments have not been previously evaluated, * evaluate them now and save the results. */ if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { status = acpi_ds_get_buffer_field_arguments(obj_desc); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } } else if ((ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) && (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) { /* * This is an SMBus write. We will bypass the entire field mechanism * and handoff the buffer directly to the handler. * * Source must be a buffer of sufficient size (ACPI_SMBUS_BUFFER_SIZE). */ if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) { ACPI_ERROR((AE_INFO, "SMBus write requires Buffer, found type %s", acpi_ut_get_object_type_name(source_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } if (source_desc->buffer.length < ACPI_SMBUS_BUFFER_SIZE) { ACPI_ERROR((AE_INFO, "SMBus write requires Buffer of length %X, found length %X", ACPI_SMBUS_BUFFER_SIZE, source_desc->buffer.length)); return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); } buffer_desc = acpi_ut_create_buffer_object(ACPI_SMBUS_BUFFER_SIZE); if (!buffer_desc) { return_ACPI_STATUS(AE_NO_MEMORY); } buffer = buffer_desc->buffer.pointer; ACPI_MEMCPY(buffer, source_desc->buffer.pointer, ACPI_SMBUS_BUFFER_SIZE); /* Lock entire transaction if requested */ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); /* * Perform the write (returns status and perhaps data in the * same buffer) * Note: SMBus protocol type is passed in upper 16-bits of Function. */ status = acpi_ex_access_region(obj_desc, 0, (acpi_integer *) buffer, ACPI_WRITE | (obj_desc->field. attribute << 16)); acpi_ex_release_global_lock(); *result_desc = buffer_desc; return_ACPI_STATUS(status); } /* Get a pointer to the data to be written */ switch (ACPI_GET_OBJECT_TYPE(source_desc)) { case ACPI_TYPE_INTEGER: buffer = &source_desc->integer.value; length = sizeof(source_desc->integer.value); break; case ACPI_TYPE_BUFFER: buffer = source_desc->buffer.pointer; length = source_desc->buffer.length; break; case ACPI_TYPE_STRING: buffer = source_desc->string.pointer; length = source_desc->string.length; break; default: return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* * We must have a buffer that is at least as long as the field * we are writing to. This is because individual fields are * indivisible and partial writes are not supported -- as per * the ACPI specification. */ new_buffer = NULL; required_length = ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length); if (length < required_length) { /* We need to create a new buffer */ new_buffer = ACPI_ALLOCATE_ZEROED(required_length); if (!new_buffer) { return_ACPI_STATUS(AE_NO_MEMORY); } /* * Copy the original data to the new buffer, starting * at Byte zero. All unused (upper) bytes of the * buffer will be 0. */ ACPI_MEMCPY((char *)new_buffer, (char *)buffer, length); buffer = new_buffer; length = required_length; } ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", source_desc, acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE (source_desc)), ACPI_GET_OBJECT_TYPE(source_desc), buffer, length)); ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", obj_desc, acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE(obj_desc)), ACPI_GET_OBJECT_TYPE(obj_desc), obj_desc->common_field.bit_length, obj_desc->common_field.start_field_bit_offset, obj_desc->common_field.base_byte_offset)); /* Lock entire transaction if requested */ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); /* Write to the field */ status = acpi_ex_insert_into_field(obj_desc, buffer, length); acpi_ex_release_global_lock(); /* Free temporary buffer if we used one */ if (new_buffer) { ACPI_FREE(new_buffer); } return_ACPI_STATUS(status); }