/* * New ATA layer SC1200 driver Alan Cox <alan@redhat.com> * * TODO: Mode selection filtering * TODO: Can't enable second channel until ATA core has serialize * TODO: Needs custom DMA cleanup code * * Based very heavily on * * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003 * * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com> * May be copied or modified under the terms of the GNU General Public License * * Development of this chipset driver was funded * by the nice folks at National Semiconductor. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #define DRV_NAME "sc1200" #define DRV_VERSION "0.2.6" #define SC1200_REV_A 0x00 #define SC1200_REV_B1 0x01 #define SC1200_REV_B3 0x02 #define SC1200_REV_C1 0x03 #define SC1200_REV_D1 0x04 /** * sc1200_clock - PCI clock * * Return the PCI bus clocking for the SC1200 chipset configuration * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz */ static int sc1200_clock(void) { /* Magic registers that give us the chipset data */ u8 chip_id = inb(0x903C); u8 silicon_rev = inb(0x903D); u16 pci_clock; if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1) return 0; /* 33 MHz mode */ /* Clock generator configuration 0x901E its 8/9 are the PCI clocking 0/3 is 33Mhz 1 is 48 2 is 66 */ pci_clock = inw(0x901E); pci_clock >>= 8; pci_clock &= 0x03; if (pci_clock == 3) pci_clock = 0; return pci_clock; } /** * sc1200_set_piomode - PIO setup * @ap: ATA interface * @adev: device on the interface * * Set our PIO requirements. This is fairly simple on the SC1200 */ static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u32 pio_timings[4][5] = { {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 format; unsigned int reg = 0x40 + 0x10 * ap->port_no; int mode = adev->pio_mode - XFER_PIO_0; pci_read_config_dword(pdev, reg + 4, &format); format >>= 31; format += sc1200_clock(); pci_write_config_dword(pdev, reg + 8 * adev->devno, pio_timings[format][mode]); } /** * sc1200_set_dmamode - DMA timing setup * @ap: ATA interface * @adev: Device being configured * * We cannot mix MWDMA and UDMA without reloading timings each switch * master to slave. */ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) { static const u32 udma_timing[3][3] = { { 0x00921250, 0x00911140, 0x00911030 }, { 0x00932470, 0x00922260, 0x00922140 }, { 0x009436A1, 0x00933481, 0x00923261 } }; static const u32 mwdma_timing[3][3] = { { 0x00077771, 0x00012121, 0x00002020 }, { 0x000BBBB2, 0x00024241, 0x00013131 }, { 0x000FFFF3, 0x00035352, 0x00015151 } }; int clock = sc1200_clock(); struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int reg = 0x40 + 0x10 * ap->port_no; int mode = adev->dma_mode; u32 format; if (mode >= XFER_UDMA_0) format = udma_timing[clock][mode - XFER_UDMA_0]; else format = mwdma_timing[clock][mode - XFER_MW_DMA_0]; if (adev->devno == 0) { u32 timings; pci_read_config_dword(pdev, reg + 4, &timings); timings &= 0x80000000UL; timings |= format; pci_write_config_dword(pdev, reg + 4, timings); } else pci_write_config_dword(pdev, reg + 12, format); } /** * sc1200_qc_issue - command issue * @qc: command pending * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if * necessary. Specifically we have a problem that there is only * one MWDMA/UDMA bit. */ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; struct ata_device *prev = ap->private_data; /* See if the DMA settings could be wrong */ if (adev->dma_mode != 0 && adev != prev && prev != NULL) { /* Maybe, but do the channels match MWDMA/UDMA ? */ if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) || (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0)) /* Switch the mode bits */ sc1200_set_dmamode(ap, adev); } return ata_sff_qc_issue(qc); } static struct scsi_host_template sc1200_sht = { ATA_BMDMA_SHT(DRV_NAME), .sg_tablesize = LIBATA_DUMB_MAX_PRD, }; static struct ata_port_operations sc1200_port_ops = { .inherits = &ata_bmdma_port_ops, .qc_prep = ata_sff_dumb_qc_prep, .qc_issue = sc1200_qc_issue, .cable_detect = ata_cable_40wire, .set_piomode = sc1200_set_piomode, .set_dmamode = sc1200_set_dmamode, }; /** * sc1200_init_one - Initialise an SC1200 * @dev: PCI device * @id: Entry in match table * * Just throw the needed data at the libata helper and it does all * our work. */ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = 0x07, .port_ops = &sc1200_port_ops }; /* Can't enable port 2 yet, see top comments */ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); } static const struct pci_device_id sc1200[] = { { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), }, { }, }; static struct pci_driver sc1200_pci_driver = { .name = DRV_NAME, .id_table = sc1200, .probe = sc1200_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = ata_pci_device_resume, #endif }; static int __init sc1200_init(void) { return pci_register_driver(&sc1200_pci_driver); } static void __exit sc1200_exit(void) { pci_unregister_driver(&sc1200_pci_driver); } MODULE_AUTHOR("Alan Cox, Mark Lord"); MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sc1200); MODULE_VERSION(DRV_VERSION); module_init(sc1200_init); module_exit(sc1200_exit);