/* * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik * Copyright (c) 2007 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick */ /* * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ #include #include #include #include #include enum { AMD_IDE_CONFIG = 0x41, AMD_CABLE_DETECT = 0x42, AMD_DRIVE_TIMING = 0x48, AMD_8BIT_TIMING = 0x4e, AMD_ADDRESS_SETUP = 0x4c, AMD_UDMA_TIMING = 0x50, }; static unsigned int amd_80w; static unsigned int amd_clock; static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 }; static inline u8 amd_offset(struct pci_dev *dev) { return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0; } /* * amd_set_speed() writes timing values to the chipset registers */ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, struct ide_timing *timing) { u8 t = 0, offset = amd_offset(dev); pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t); t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t); pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)), ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn), ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); switch (udma_mask) { case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break; case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break; case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break; default: return; } pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); } /* * amd_set_drive() computes timing values and configures the chipset * to a desired transfer mode. It also can be called by upper layers. */ static void amd_set_drive(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *peer = hwif->drives + (~drive->dn & 1); struct ide_timing t, p; int T, UT; u8 udma_mask = hwif->ultra_mask; T = 1000000000 / amd_clock; UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); ide_timing_compute(drive, speed, &t, T, UT); if (peer->present) { ide_timing_compute(peer, peer->current_speed, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1; if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15; amd_set_speed(dev, drive->dn, udma_mask, &t); } /* * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. */ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) { amd_set_drive(drive, XFER_PIO_0 + pio); } static void __devinit amd7409_cable_detect(struct pci_dev *dev, const char *name) { /* no host side cable detection */ amd_80w = 0x03; } static void __devinit amd7411_cable_detect(struct pci_dev *dev, const char *name) { int i; u32 u = 0; u8 t = 0, offset = amd_offset(dev); pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t); pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u); amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); for (i = 24; i >= 0; i -= 8) if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { printk(KERN_WARNING "%s: BIOS didn't set cable bits " "correctly. Enabling workaround.\n", name); amd_80w |= (1 << (1 - (i >> 4))); } } /* * The initialization callback. Initialize drive independent registers. */ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name) { u8 t = 0, offset = amd_offset(dev); /* * Check 80-wire cable presence. */ if (dev->vendor == PCI_VENDOR_ID_AMD && dev->device == PCI_DEVICE_ID_AMD_COBRA_7401) ; /* no UDMA > 2 */ else if (dev->vendor == PCI_VENDOR_ID_AMD && dev->device == PCI_DEVICE_ID_AMD_VIPER_7409) amd7409_cable_detect(dev, name); else amd7411_cable_detect(dev, name); /* * Take care of prefetch & postwrite. */ pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t); /* * Check for broken FIFO support. */ if (dev->vendor == PCI_VENDOR_ID_AMD && dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411) t &= 0x0f; else t |= 0xf0; pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t); /* * Determine the system bus clock. */ amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; switch (amd_clock) { case 33000: amd_clock = 33333; break; case 37000: amd_clock = 37500; break; case 41000: amd_clock = 41666; break; } if (amd_clock < 20000 || amd_clock > 50000) { printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", name, amd_clock); amd_clock = 33333; } return dev->irq; } static u8 __devinit amd_cable_detect(ide_hwif_t *hwif) { if ((amd_80w >> hwif->channel) & 1) return ATA_CBL_PATA80; else return ATA_CBL_PATA40; } static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); if (hwif->irq == 0) /* 0 is bogus but will do for now */ hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); } static const struct ide_port_ops amd_port_ops = { .set_pio_mode = amd_set_pio_mode, .set_dma_mode = amd_set_drive, .cable_detect = amd_cable_detect, }; #define IDE_HFLAGS_AMD \ (IDE_HFLAG_PIO_NO_BLACKLIST | \ IDE_HFLAG_POST_SET_MODE | \ IDE_HFLAG_IO_32BIT | \ IDE_HFLAG_UNMASK_IRQS) #define DECLARE_AMD_DEV(name_str, swdma, udma) \ { \ .name = name_str, \ .init_chipset = init_chipset_amd74xx, \ .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ .pio_mask = ATA_PIO5, \ .swdma_mask = swdma, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = udma, \ } #define DECLARE_NV_DEV(name_str, udma) \ { \ .name = name_str, \ .init_chipset = init_chipset_amd74xx, \ .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ .pio_mask = ATA_PIO5, \ .swdma_mask = ATA_SWDMA2, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = udma, \ } static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { /* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2), /* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4), /* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5), /* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5), /* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6), /* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5), /* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6), /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6), /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6), /* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6), /* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6), /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6), /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6), /* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6), /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6), /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6), /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6), /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6), /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6), /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6), /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6), /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6), /* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; d = amd74xx_chipsets[idx]; /* * Check for bad SWDMA and incorrectly wired Serenade mainboards. */ if (idx == 1) { if (dev->revision <= 7) d.swdma_mask = 0; d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; } else if (idx == 4) { if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD && dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) d.udma_mask = ATA_UDMA5; } printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n", d.name, pci_name(dev), dev->revision, amd_dma[fls(d.udma_mask) - 1]); return ide_pci_init_one(dev, &d, NULL); } static const struct pci_device_id amd74xx_pci_tbl[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 3 }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 4 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 5 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 6 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 7 }, #ifdef CONFIG_BLK_DEV_IDE_SATA { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 8 }, #endif { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 9 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 10 }, #ifdef CONFIG_BLK_DEV_IDE_SATA { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 11 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 12 }, #endif { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 13 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 14 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 15 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 16 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 17 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 18 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 19 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 20 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 21 }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 22 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); static struct pci_driver driver = { .name = "AMD_IDE", .id_table = amd74xx_pci_tbl, .probe = amd74xx_probe, }; static int __init amd74xx_ide_init(void) { return ide_pci_register_driver(&driver); } module_init(amd74xx_ide_init); MODULE_AUTHOR("Vojtech Pavlik"); MODULE_DESCRIPTION("AMD PCI IDE driver"); MODULE_LICENSE("GPL");