/* * Copyright (c) 2006 QLogic, Inc. All rights reserved. * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include "ipath_verbs.h" #include "ipath_kernel.h" /* * Convert the AETH RNR timeout code into the number of milliseconds. */ const u32 ib_ipath_rnr_table[32] = { 656, /* 0 */ 1, /* 1 */ 1, /* 2 */ 1, /* 3 */ 1, /* 4 */ 1, /* 5 */ 1, /* 6 */ 1, /* 7 */ 1, /* 8 */ 1, /* 9 */ 1, /* A */ 1, /* B */ 1, /* C */ 1, /* D */ 2, /* E */ 2, /* F */ 3, /* 10 */ 4, /* 11 */ 6, /* 12 */ 8, /* 13 */ 11, /* 14 */ 16, /* 15 */ 21, /* 16 */ 31, /* 17 */ 41, /* 18 */ 62, /* 19 */ 82, /* 1A */ 123, /* 1B */ 164, /* 1C */ 246, /* 1D */ 328, /* 1E */ 492 /* 1F */ }; /** * ipath_insert_rnr_queue - put QP on the RNR timeout list for the device * @qp: the QP * * XXX Use a simple list for now. We might need a priority * queue if we have lots of QPs waiting for RNR timeouts * but that should be rare. */ void ipath_insert_rnr_queue(struct ipath_qp *qp) { struct ipath_ibdev *dev = to_idev(qp->ibqp.device); unsigned long flags; spin_lock_irqsave(&dev->pending_lock, flags); if (list_empty(&dev->rnrwait)) list_add(&qp->timerwait, &dev->rnrwait); else { struct list_head *l = &dev->rnrwait; struct ipath_qp *nqp = list_entry(l->next, struct ipath_qp, timerwait); while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) { qp->s_rnr_timeout -= nqp->s_rnr_timeout; l = l->next; if (l->next == &dev->rnrwait) break; nqp = list_entry(l->next, struct ipath_qp, timerwait); } list_add(&qp->timerwait, l); } spin_unlock_irqrestore(&dev->pending_lock, flags); } static int init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe) { int user = to_ipd(qp->ibqp.pd)->user; int i, j, ret; struct ib_wc wc; qp->r_len = 0; for (i = j = 0; i < wqe->num_sge; i++) { if (wqe->sg_list[i].length == 0) continue; /* Check LKEY */ if ((user && wqe->sg_list[i].lkey == 0) || !ipath_lkey_ok(qp, &qp->r_sg_list[j], &wqe->sg_list[i], IB_ACCESS_LOCAL_WRITE)) goto bad_lkey; qp->r_len += wqe->sg_list[i].length; j++; } qp->r_sge.sge = qp->r_sg_list[0]; qp->r_sge.sg_list = qp->r_sg_list + 1; qp->r_sge.num_sge = j; ret = 1; goto bail; bad_lkey: wc.wr_id = wqe->wr_id; wc.status = IB_WC_LOC_PROT_ERR; wc.opcode = IB_WC_RECV; wc.vendor_err = 0; wc.byte_len = 0; wc.imm_data = 0; wc.qp = &qp->ibqp; wc.src_qp = 0; wc.wc_flags = 0; wc.pkey_index = 0; wc.slid = 0; wc.sl = 0; wc.dlid_path_bits = 0; wc.port_num = 0; /* Signal solicited completion event. */ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1); ret = 0; bail: return ret; } /** * ipath_get_rwqe - copy the next RWQE into the QP's RWQE * @qp: the QP * @wr_id_only: update wr_id only, not SGEs * * Return 0 if no RWQE is available, otherwise return 1. * * Can be called from interrupt level. */ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) { unsigned long flags; struct ipath_rq *rq; struct ipath_rwq *wq; struct ipath_srq *srq; struct ipath_rwqe *wqe; void (*handler)(struct ib_event *, void *); u32 tail; int ret; if (qp->ibqp.srq) { srq = to_isrq(qp->ibqp.srq); handler = srq->ibsrq.event_handler; rq = &srq->rq; } else { srq = NULL; handler = NULL; rq = &qp->r_rq; } spin_lock_irqsave(&rq->lock, flags); wq = rq->wq; tail = wq->tail; /* Validate tail before using it since it is user writable. */ if (tail >= rq->size) tail = 0; do { if (unlikely(tail == wq->head)) { spin_unlock_irqrestore(&rq->lock, flags); ret = 0; goto bail; } wqe = get_rwqe_ptr(rq, tail); if (++tail >= rq->size) tail = 0; } while (!wr_id_only && !init_sge(qp, wqe)); qp->r_wr_id = wqe->wr_id; wq->tail = tail; ret = 1; qp->r_wrid_valid = 1; if (handler) { u32 n; /* * validate head pointer value and compute * the number of remaining WQEs. */ n = wq->head; if (n >= rq->size) n = 0; if (n < tail) n += rq->size - tail; else n -= tail; if (n < srq->limit) { struct ib_event ev; srq->limit = 0; spin_unlock_irqrestore(&rq->lock, flags); ev.device = qp->ibqp.device; ev.element.srq = qp->ibqp.srq; ev.event = IB_EVENT_SRQ_LIMIT_REACHED; handler(&ev, srq->ibsrq.srq_context); goto bail; } } spin_unlock_irqrestore(&rq->lock, flags); bail: return ret; } /** * ipath_ruc_loopback - handle UC and RC lookback requests * @sqp: the loopback QP * * This is called from ipath_do_uc_send() or ipath_do_rc_send() to * forward a WQE addressed to the same HCA. * Note that although we are single threaded due to the tasklet, we still * have to protect against post_send(). We don't have to worry about * receive interrupts since this is a connected protocol and all packets * will pass through here. */ static void ipath_ruc_loopback(struct ipath_qp *sqp) { struct ipath_ibdev *dev = to_idev(sqp->ibqp.device); struct ipath_qp *qp; struct ipath_swqe *wqe; struct ipath_sge *sge; unsigned long flags; struct ib_wc wc; u64 sdata; atomic64_t *maddr; qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn); if (!qp) { dev->n_pkt_drops++; return; } again: spin_lock_irqsave(&sqp->s_lock, flags); if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_SEND_OK) || sqp->s_rnr_timeout) { spin_unlock_irqrestore(&sqp->s_lock, flags); goto done; } /* Get the next send request. */ if (sqp->s_last == sqp->s_head) { /* Send work queue is empty. */ spin_unlock_irqrestore(&sqp->s_lock, flags); goto done; } /* * We can rely on the entry not changing without the s_lock * being held until we update s_last. */ wqe = get_swqe_ptr(sqp, sqp->s_last); spin_unlock_irqrestore(&sqp->s_lock, flags); wc.wc_flags = 0; wc.imm_data = 0; sqp->s_sge.sge = wqe->sg_list[0]; sqp->s_sge.sg_list = wqe->sg_list + 1; sqp->s_sge.num_sge = wqe->wr.num_sge; sqp->s_len = wqe->length; switch (wqe->wr.opcode) { case IB_WR_SEND_WITH_IMM: wc.wc_flags = IB_WC_WITH_IMM; wc.imm_data = wqe->wr.imm_data; /* FALLTHROUGH */ case IB_WR_SEND: if (!ipath_get_rwqe(qp, 0)) { rnr_nak: /* Handle RNR NAK */ if (qp->ibqp.qp_type == IB_QPT_UC) goto send_comp; if (sqp->s_rnr_retry == 0) { wc.status = IB_WC_RNR_RETRY_EXC_ERR; goto err; } if (sqp->s_rnr_retry_cnt < 7) sqp->s_rnr_retry--; dev->n_rnr_naks++; sqp->s_rnr_timeout = ib_ipath_rnr_table[qp->r_min_rnr_timer]; ipath_insert_rnr_queue(sqp); goto done; } break; case IB_WR_RDMA_WRITE_WITH_IMM: wc.wc_flags = IB_WC_WITH_IMM; wc.imm_data = wqe->wr.imm_data; if (!ipath_get_rwqe(qp, 1)) goto rnr_nak; /* FALLTHROUGH */ case IB_WR_RDMA_WRITE: if (wqe->length == 0) break; if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, wqe->length, wqe->wr.wr.rdma.remote_addr, wqe->wr.wr.rdma.rkey, IB_ACCESS_REMOTE_WRITE))) { acc_err: wc.status = IB_WC_REM_ACCESS_ERR; err: wc.wr_id = wqe->wr.wr_id; wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode]; wc.vendor_err = 0; wc.byte_len = 0; wc.qp = &sqp->ibqp; wc.src_qp = sqp->remote_qpn; wc.pkey_index = 0; wc.slid = sqp->remote_ah_attr.dlid; wc.sl = sqp->remote_ah_attr.sl; wc.dlid_path_bits = 0; wc.port_num = 0; spin_lock_irqsave(&sqp->s_lock, flags); ipath_sqerror_qp(sqp, &wc); spin_unlock_irqrestore(&sqp->s_lock, flags); goto done; } break; case IB_WR_RDMA_READ: if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ))) goto acc_err; if (unlikely(!ipath_rkey_ok(qp, &sqp->s_sge, wqe->length, wqe->wr.wr.rdma.remote_addr, wqe->wr.wr.rdma.rkey, IB_ACCESS_REMOTE_READ))) goto acc_err; qp->r_sge.sge = wqe->sg_list[0]; qp->r_sge.sg_list = wqe->sg_list + 1; qp->r_sge.num_sge = wqe->wr.num_sge; break; case IB_WR_ATOMIC_CMP_AND_SWP: case IB_WR_ATOMIC_FETCH_AND_ADD: if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC))) goto acc_err; if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, sizeof(u64), wqe->wr.wr.atomic.remote_addr, wqe->wr.wr.atomic.rkey, IB_ACCESS_REMOTE_ATOMIC))) goto acc_err; /* Perform atomic OP and save result. */ maddr = (atomic64_t *) qp->r_sge.sge.vaddr; sdata = wqe->wr.wr.atomic.compare_add; *(u64 *) sqp->s_sge.sge.vaddr = (wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) ? (u64) atomic64_add_return(sdata, maddr) - sdata : (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr, sdata, wqe->wr.wr.atomic.swap); goto send_comp; default: goto done; } sge = &sqp->s_sge.sge; while (sqp->s_len) { u32 len = sqp->s_len; if (len > sge->length) len = sge->length; BUG_ON(len == 0); ipath_copy_sge(&qp->r_sge, sge->vaddr, len); sge->vaddr += len; sge->length -= len; sge->sge_length -= len; if (sge->sge_length == 0) { if (--sqp->s_sge.num_sge) *sge = *sqp->s_sge.sg_list++; } else if (sge->length == 0 && sge->mr != NULL) { if (++sge->n >= IPATH_SEGSZ) { if (++sge->m >= sge->mr->mapsz) break; sge->n = 0; } sge->vaddr = sge->mr->map[sge->m]->segs[sge->n].vaddr; sge->length = sge->mr->map[sge->m]->segs[sge->n].length; } sqp->s_len -= len; } if (wqe->wr.opcode == IB_WR_RDMA_WRITE || wqe->wr.opcode == IB_WR_RDMA_READ) goto send_comp; if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM) wc.opcode = IB_WC_RECV_RDMA_WITH_IMM; else wc.opcode = IB_WC_RECV; wc.wr_id = qp->r_wr_id; wc.status = IB_WC_SUCCESS; wc.vendor_err = 0; wc.byte_len = wqe->length; wc.qp = &qp->ibqp; wc.src_qp = qp->remote_qpn; /* XXX do we know which pkey matched? Only needed for GSI. */ wc.pkey_index = 0; wc.slid = qp->remote_ah_attr.dlid; wc.sl = qp->remote_ah_attr.sl; wc.dlid_path_bits = 0; /* Signal completion event if the solicited bit is set. */ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, wqe->wr.send_flags & IB_SEND_SOLICITED); send_comp: sqp->s_rnr_retry = sqp->s_rnr_retry_cnt; if (!(sqp->s_flags & IPATH_S_SIGNAL_REQ_WR) || (wqe->wr.send_flags & IB_SEND_SIGNALED)) { wc.wr_id = wqe->wr.wr_id; wc.status = IB_WC_SUCCESS; wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode]; wc.vendor_err = 0; wc.byte_len = wqe->length; wc.qp = &sqp->ibqp; wc.src_qp = 0; wc.pkey_index = 0; wc.slid = 0; wc.sl = 0; wc.dlid_path_bits = 0; wc.port_num = 0; ipath_cq_enter(to_icq(sqp->ibqp.send_cq), &wc, 0); } /* Update s_last now that we are finished with the SWQE */ spin_lock_irqsave(&sqp->s_lock, flags); if (++sqp->s_last >= sqp->s_size) sqp->s_last = 0; spin_unlock_irqrestore(&sqp->s_lock, flags); goto again; done: if (atomic_dec_and_test(&qp->refcount)) wake_up(&qp->wait); } static int want_buffer(struct ipath_devdata *dd) { set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl); ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); return 0; } /** * ipath_no_bufs_available - tell the layer driver we need buffers * @qp: the QP that caused the problem * @dev: the device we ran out of buffers on * * Called when we run out of PIO buffers. */ void ipath_no_bufs_available(struct ipath_qp *qp, struct ipath_ibdev *dev) { unsigned long flags; spin_lock_irqsave(&dev->pending_lock, flags); if (list_empty(&qp->piowait)) list_add_tail(&qp->piowait, &dev->piowait); spin_unlock_irqrestore(&dev->pending_lock, flags); /* * Note that as soon as want_buffer() is called and * possibly before it returns, ipath_ib_piobufavail() * could be called. If we are still in the tasklet function, * tasklet_hi_schedule() will not call us until the next time * tasklet_hi_schedule() is called. * We clear the tasklet flag now since we are committing to return * from the tasklet function. */ clear_bit(IPATH_S_BUSY, &qp->s_busy); tasklet_unlock(&qp->s_task); want_buffer(dev->dd); dev->n_piowait++; } /** * ipath_post_ruc_send - post RC and UC sends * @qp: the QP to post on * @wr: the work request to send */ int ipath_post_ruc_send(struct ipath_qp *qp, struct ib_send_wr *wr) { struct ipath_swqe *wqe; unsigned long flags; u32 next; int i, j; int acc; int ret; /* * Don't allow RDMA reads or atomic operations on UC or * undefined operations. * Make sure buffer is large enough to hold the result for atomics. */ if (qp->ibqp.qp_type == IB_QPT_UC) { if ((unsigned) wr->opcode >= IB_WR_RDMA_READ) { ret = -EINVAL; goto bail; } } else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD) { ret = -EINVAL; goto bail; } else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP && (wr->num_sge == 0 || wr->sg_list[0].length < sizeof(u64) || wr->sg_list[0].addr & (sizeof(u64) - 1))) { ret = -EINVAL; goto bail; } else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic) { ret = -EINVAL; goto bail; } /* IB spec says that num_sge == 0 is OK. */ if (wr->num_sge > qp->s_max_sge) { ret = -ENOMEM; goto bail; } spin_lock_irqsave(&qp->s_lock, flags); next = qp->s_head + 1; if (next >= qp->s_size) next = 0; if (next == qp->s_last) { spin_unlock_irqrestore(&qp->s_lock, flags); ret = -EINVAL; goto bail; } wqe = get_swqe_ptr(qp, qp->s_head); wqe->wr = *wr; wqe->ssn = qp->s_ssn++; wqe->sg_list[0].mr = NULL; wqe->sg_list[0].vaddr = NULL; wqe->sg_list[0].length = 0; wqe->sg_list[0].sge_length = 0; wqe->length = 0; acc = wr->opcode >= IB_WR_RDMA_READ ? IB_ACCESS_LOCAL_WRITE : 0; for (i = 0, j = 0; i < wr->num_sge; i++) { if (to_ipd(qp->ibqp.pd)->user && wr->sg_list[i].lkey == 0) { spin_unlock_irqrestore(&qp->s_lock, flags); ret = -EINVAL; goto bail; } if (wr->sg_list[i].length == 0) continue; if (!ipath_lkey_ok(qp, &wqe->sg_list[j], &wr->sg_list[i], acc)) { spin_unlock_irqrestore(&qp->s_lock, flags); ret = -EINVAL; goto bail; } wqe->length += wr->sg_list[i].length; j++; } wqe->wr.num_sge = j; qp->s_head = next; spin_unlock_irqrestore(&qp->s_lock, flags); ipath_do_ruc_send((unsigned long) qp); ret = 0; bail: return ret; } /** * ipath_make_grh - construct a GRH header * @dev: a pointer to the ipath device * @hdr: a pointer to the GRH header being constructed * @grh: the global route address to send to * @hwords: the number of 32 bit words of header being sent * @nwords: the number of 32 bit words of data being sent * * Return the size of the header in 32 bit words. */ u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr, struct ib_global_route *grh, u32 hwords, u32 nwords) { hdr->version_tclass_flow = cpu_to_be32((6 << 28) | (grh->traffic_class << 20) | grh->flow_label); hdr->paylen = cpu_to_be16((hwords - 2 + nwords + SIZE_OF_CRC) << 2); /* next_hdr is defined by C8-7 in ch. 8.4.1 */ hdr->next_hdr = 0x1B; hdr->hop_limit = grh->hop_limit; /* The SGID is 32-bit aligned. */ hdr->sgid.global.subnet_prefix = dev->gid_prefix; hdr->sgid.global.interface_id = dev->dd->ipath_guid; hdr->dgid = grh->dgid; /* GRH header size in 32-bit words. */ return sizeof(struct ib_grh) / sizeof(u32); } /** * ipath_do_ruc_send - perform a send on an RC or UC QP * @data: contains a pointer to the QP * * Process entries in the send work queue until credit or queue is * exhausted. Only allow one CPU to send a packet per QP (tasklet). * Otherwise, after we drop the QP s_lock, two threads could send * packets out of order. */ void ipath_do_ruc_send(unsigned long data) { struct ipath_qp *qp = (struct ipath_qp *)data; struct ipath_ibdev *dev = to_idev(qp->ibqp.device); unsigned long flags; u16 lrh0; u32 nwords; u32 extra_bytes; u32 bth0; u32 bth2; u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu); struct ipath_other_headers *ohdr; if (test_and_set_bit(IPATH_S_BUSY, &qp->s_busy)) goto bail; if (unlikely(qp->remote_ah_attr.dlid == dev->dd->ipath_lid)) { ipath_ruc_loopback(qp); goto clear; } ohdr = &qp->s_hdr.u.oth; if (qp->remote_ah_attr.ah_flags & IB_AH_GRH) ohdr = &qp->s_hdr.u.l.oth; again: /* Check for a constructed packet to be sent. */ if (qp->s_hdrwords != 0) { /* * If no PIO bufs are available, return. An interrupt will * call ipath_ib_piobufavail() when one is available. */ if (ipath_verbs_send(dev->dd, qp->s_hdrwords, (u32 *) &qp->s_hdr, qp->s_cur_size, qp->s_cur_sge)) { ipath_no_bufs_available(qp, dev); goto bail; } dev->n_unicast_xmit++; /* Record that we sent the packet and s_hdr is empty. */ qp->s_hdrwords = 0; } /* * The lock is needed to synchronize between setting * qp->s_ack_state, resend timer, and post_send(). */ spin_lock_irqsave(&qp->s_lock, flags); if (!((qp->ibqp.qp_type == IB_QPT_RC) ? ipath_make_rc_req(qp, ohdr, pmtu, &bth0, &bth2) : ipath_make_uc_req(qp, ohdr, pmtu, &bth0, &bth2))) { /* * Clear the busy bit before unlocking to avoid races with * adding new work queue items and then failing to process * them. */ clear_bit(IPATH_S_BUSY, &qp->s_busy); spin_unlock_irqrestore(&qp->s_lock, flags); goto bail; } spin_unlock_irqrestore(&qp->s_lock, flags); /* Construct the header. */ extra_bytes = (4 - qp->s_cur_size) & 3; nwords = (qp->s_cur_size + extra_bytes) >> 2; lrh0 = IPATH_LRH_BTH; if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) { qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh, &qp->remote_ah_attr.grh, qp->s_hdrwords, nwords); lrh0 = IPATH_LRH_GRH; } lrh0 |= qp->remote_ah_attr.sl << 4; qp->s_hdr.lrh[0] = cpu_to_be16(lrh0); qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid); qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords + SIZE_OF_CRC); qp->s_hdr.lrh[3] = cpu_to_be16(dev->dd->ipath_lid); bth0 |= ipath_get_pkey(dev->dd, qp->s_pkey_index); bth0 |= extra_bytes << 20; ohdr->bth[0] = cpu_to_be32(bth0); ohdr->bth[1] = cpu_to_be32(qp->remote_qpn); ohdr->bth[2] = cpu_to_be32(bth2); /* Check for more work to do. */ goto again; clear: clear_bit(IPATH_S_BUSY, &qp->s_busy); bail: return; }