/* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Copyright (c) 2004 Arnaud Patard * iPAQ H1940 touchscreen support * * ChangeLog * * 2004-09-05: Herbert Pötzl * - added clock (de-)allocation code * * 2005-03-06: Arnaud Patard * - h1940_ -> s3c2410 (this driver is now also used on the n30 * machines :P) * - Debug messages are now enabled with the config option * TOUCHSCREEN_S3C2410_DEBUG * - Changed the way the value are read * - Input subsystem should now work * - Use ioremap and readl/writel * * 2005-03-23: Arnaud Patard * - Make use of some undocumented features of the touchscreen * controller * * 2007-05-23: Harald Welte * - Add proper support for S32440 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* For ts.dev.id.version */ #define S3C2410TSVERSION 0x0101 #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) #define WAIT4INT(x) (((x)<<8) | \ S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \ S3C2410_ADCTSC_XY_PST(3)) #define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \ S3C2410_ADCTSC_AUTO_PST | S3C2410_ADCTSC_XY_PST(0)) #define DEBUG_LVL KERN_DEBUG MODULE_AUTHOR("Arnaud Patard "); MODULE_DESCRIPTION("s3c2410 touchscreen driver"); MODULE_LICENSE("GPL"); /* * Definitions & global arrays. */ static char *s3c2410ts_name = "s3c2410 TouchScreen"; /* * Per-touchscreen data. */ struct s3c2410ts { struct input_dev *dev; long xp; long yp; int count; int shift; }; static struct s3c2410ts ts; static void __iomem *base_addr; static inline void s3c2410_ts_connect(void) { s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON); s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPG13_nXPON); s3c2410_gpio_cfgpin(S3C2410_GPG14, S3C2410_GPG14_YMON); s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON); } static void touch_timer_fire(unsigned long data) { unsigned long data0; unsigned long data1; int updown; data0 = readl(base_addr+S3C2410_ADCDAT0); data1 = readl(base_addr+S3C2410_ADCDAT1); updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN)); if (updown) { if (ts.count != 0) { ts.xp >>= ts.shift; ts.yp >>= ts.shift; #ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG { struct timeval tv; do_gettimeofday(&tv); printk(DEBUG_LVL "T: %06d, X: %03ld, Y: %03ld\n", (int)tv.tv_usec, ts.xp, ts.yp); } #endif input_report_abs(ts.dev, ABS_X, ts.xp); input_report_abs(ts.dev, ABS_Y, ts.yp); input_report_key(ts.dev, BTN_TOUCH, 1); input_report_abs(ts.dev, ABS_PRESSURE, 1); input_sync(ts.dev); } ts.xp = 0; ts.yp = 0; ts.count = 0; writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, base_addr+S3C2410_ADCTSC); writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); } else { ts.count = 0; input_report_key(ts.dev, BTN_TOUCH, 0); input_report_abs(ts.dev, ABS_PRESSURE, 0); input_sync(ts.dev); writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); } } static struct timer_list touch_timer = TIMER_INITIALIZER(touch_timer_fire, 0, 0); static irqreturn_t stylus_updown(int irq, void *dev_id) { unsigned long data0; unsigned long data1; int updown; data0 = readl(base_addr+S3C2410_ADCDAT0); data1 = readl(base_addr+S3C2410_ADCDAT1); updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN)); /* TODO we should never get an interrupt with updown set while * the timer is running, but maybe we ought to verify that the * timer isn't running anyways. */ if (updown) touch_timer_fire(0); return IRQ_HANDLED; } static irqreturn_t stylus_action(int irq, void *dev_id) { unsigned long data0; unsigned long data1; data0 = readl(base_addr+S3C2410_ADCDAT0); data1 = readl(base_addr+S3C2410_ADCDAT1); ts.xp += data0 & S3C2410_ADCDAT0_XPDATA_MASK; ts.yp += data1 & S3C2410_ADCDAT1_YPDATA_MASK; ts.count++; if (ts.count < (1<dev.platform_data; if (!info) { printk(KERN_ERR "Hm... too bad : no platform data for ts\n"); return -EINVAL; } #ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG printk(DEBUG_LVL "Entering s3c2410ts_init\n"); #endif adc_clock = clk_get(NULL, "adc"); if (!adc_clock) { printk(KERN_ERR "failed to get adc clock source\n"); return -ENOENT; } clk_enable(adc_clock); #ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG printk(DEBUG_LVL "got and enabled clock\n"); #endif base_addr = ioremap(S3C2410_PA_ADC,0x20); if (base_addr == NULL) { printk(KERN_ERR "Failed to remap register block\n"); return -ENOMEM; } /* If we acutally are a S3C2410: Configure GPIOs */ if (!strcmp(pdev->name, "s3c2410-ts")) s3c2410_ts_connect(); if ((info->presc&0xff) > 0) writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\ base_addr+S3C2410_ADCCON); else writel(0,base_addr+S3C2410_ADCCON); /* Initialise registers */ if ((info->delay&0xffff) > 0) writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); /* Initialise input stuff */ memset(&ts, 0, sizeof(struct s3c2410ts)); input_dev = input_allocate_device(); if (!input_dev) { printk(KERN_ERR "Unable to allocate the input device !!\n"); return -ENOMEM; } ts.dev = input_dev; ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0); input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0); input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0); ts.dev->private = &ts; ts.dev->name = s3c2410ts_name; ts.dev->id.bustype = BUS_RS232; ts.dev->id.vendor = 0xDEAD; ts.dev->id.product = 0xBEEF; ts.dev->id.version = S3C2410TSVERSION; ts.shift = info->oversampling_shift; /* Get irqs */ if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM, "s3c2410_action", ts.dev)) { printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_ADC !\n"); iounmap(base_addr); return -EIO; } if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM, "s3c2410_action", ts.dev)) { printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_TC !\n"); free_irq(IRQ_ADC, ts.dev); iounmap(base_addr); return -EIO; } printk(KERN_INFO "%s successfully loaded\n", s3c2410ts_name); /* All went ok, so register to the input system */ rc = input_register_device(ts.dev); if (rc) { free_irq(IRQ_TC, ts.dev); free_irq(IRQ_ADC, ts.dev); clk_disable(adc_clock); iounmap(base_addr); return -EIO; } return 0; } static int s3c2410ts_remove(struct platform_device *pdev) { disable_irq(IRQ_ADC); disable_irq(IRQ_TC); free_irq(IRQ_TC,ts.dev); free_irq(IRQ_ADC,ts.dev); if (adc_clock) { clk_disable(adc_clock); clk_put(adc_clock); adc_clock = NULL; } input_unregister_device(ts.dev); iounmap(base_addr); return 0; } #ifdef CONFIG_PM static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state) { writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC); writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM, base_addr+S3C2410_ADCCON); disable_irq(IRQ_ADC); disable_irq(IRQ_TC); clk_disable(adc_clock); return 0; } static int s3c2410ts_resume(struct platform_device *pdev) { struct s3c2410_ts_mach_info *info = ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data; clk_enable(adc_clock); msleep(1); enable_irq(IRQ_ADC); enable_irq(IRQ_TC); if ((info->presc&0xff) > 0) writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\ base_addr+S3C2410_ADCCON); else writel(0,base_addr+S3C2410_ADCCON); /* Initialise registers */ if ((info->delay&0xffff) > 0) writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); return 0; } #else #define s3c2410ts_suspend NULL #define s3c2410ts_resume NULL #endif static struct platform_driver s3c2410ts_driver = { .driver = { .name = "s3c2410-ts", .owner = THIS_MODULE, }, .probe = s3c2410ts_probe, .remove = s3c2410ts_remove, .suspend = s3c2410ts_suspend, .resume = s3c2410ts_resume, }; static struct platform_driver s3c2440ts_driver = { .driver = { .name = "s3c2440-ts", .owner = THIS_MODULE, }, .probe = s3c2410ts_probe, .remove = s3c2410ts_remove, .suspend = s3c2410ts_suspend, .resume = s3c2410ts_resume, }; static int __init s3c2410ts_init(void) { int rc; rc = platform_driver_register(&s3c2410ts_driver); if (rc < 0) return rc; rc = platform_driver_register(&s3c2440ts_driver); if (rc < 0) platform_driver_unregister(&s3c2410ts_driver); return rc; } static void __exit s3c2410ts_exit(void) { platform_driver_unregister(&s3c2440ts_driver); platform_driver_unregister(&s3c2410ts_driver); } module_init(s3c2410ts_init); module_exit(s3c2410ts_exit); /* Local variables: compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.." c-basic-offset: 8 End: */