/* $Id: teles_cs.c,v 1.1.2.2 2004/01/25 15:07:06 keil Exp $ */ /*====================================================================== A teles S0 PCMCIA client driver Based on skeleton by David Hinds, dhinds@allegro.stanford.edu Written by Christof Petig, christof.petig@wtal.de Also inspired by ELSA PCMCIA driver by Klaus Lichtenwalder Extentions to new hisax_pcmcia by Karsten Keil minor changes to be compatible with kernel 2.4.x by Jan.Schubert@GMX.li ======================================================================*/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "hisax_cfg.h" MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Teles PCMCIA cards"); MODULE_AUTHOR("Christof Petig, christof.petig@wtal.de, Karsten Keil, kkeil@suse.de"); MODULE_LICENSE("GPL"); /* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not define PCMCIA_DEBUG at all, all the debug code will be left out. If you compile with PCMCIA_DEBUG=0, the debug code will be present but disabled -- but it can then be enabled for specific modules at load time with a 'pc_debug=#' option to insmod. */ #ifdef PCMCIA_DEBUG static int pc_debug = PCMCIA_DEBUG; module_param(pc_debug, int, 0); #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); static char *version = "teles_cs.c 2.10 2002/07/30 22:23:34 kkeil"; #else #define DEBUG(n, args...) #endif /*====================================================================*/ /* Parameters that can be set with 'insmod' */ static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); /*====================================================================*/ /* The event() function is this driver's Card Services event handler. It will be called by Card Services when an appropriate card status event is received. The config() and release() entry points are used to configure or release a socket, in response to card insertion and ejection events. They are invoked from the teles_cs event handler. */ static void teles_cs_config(dev_link_t *link); static void teles_cs_release(dev_link_t *link); static int teles_cs_event(event_t event, int priority, event_callback_args_t *args); /* The attach() and detach() entry points are used to create and destroy "instances" of the driver, where each instance represents everything needed to manage one actual PCMCIA card. */ static dev_link_t *teles_attach(void); static void teles_detach(struct pcmcia_device *p_dev); /* The dev_info variable is the "key" that is used to match up this device driver with appropriate cards, through the card configuration database. */ static dev_info_t dev_info = "teles_cs"; /* A linked list of "instances" of the teles_cs device. Each actual PCMCIA card corresponds to one device instance, and is described by one dev_link_t structure (defined in ds.h). You may not want to use a linked list for this -- for example, the memory card driver uses an array of dev_link_t pointers, where minor device numbers are used to derive the corresponding array index. */ static dev_link_t *dev_list = NULL; /* A dev_link_t structure has fields for most things that are needed to keep track of a socket, but there will usually be some device specific information that also needs to be kept track of. The 'priv' pointer in a dev_link_t structure can be used to point to a device-specific private data structure, like this. To simplify the data structure handling, we actually include the dev_link_t structure in the device's private data structure. A driver needs to provide a dev_node_t structure for each device on a card. In some cases, there is only one device per card (for example, ethernet cards, modems). In other cases, there may be many actual or logical devices (SCSI adapters, memory cards with multiple partitions). The dev_node_t structures need to be kept in a linked list starting at the 'dev' field of a dev_link_t structure. We allocate them in the card's private data structure, because they generally shouldn't be allocated dynamically. In this case, we also provide a flag to indicate if a device is "stopped" due to a power management event, or card ejection. The device IO routines can use a flag like this to throttle IO to a card that is not ready to accept it. */ typedef struct local_info_t { dev_link_t link; dev_node_t node; int busy; int cardnr; } local_info_t; /*====================================================================== teles_attach() creates an "instance" of the driver, allocatingx local data structures for one device. The device is registered with Card Services. The dev_link structure is initialized, but we don't actually configure the card at this point -- we wait until we receive a card insertion event. ======================================================================*/ static dev_link_t *teles_attach(void) { client_reg_t client_reg; dev_link_t *link; local_info_t *local; int ret; DEBUG(0, "teles_attach()\n"); /* Allocate space for private device-specific data */ local = kmalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) return NULL; memset(local, 0, sizeof(local_info_t)); local->cardnr = -1; link = &local->link; link->priv = local; /* Interrupt setup */ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED; link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID; link->irq.Handler = NULL; /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost everything. In most clients, many details (i.e., number, sizes, and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ link->io.NumPorts1 = 96; link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 5; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.Vcc = 50; link->conf.IntType = INT_MEMORY_AND_IO; /* Register with Card Services */ link->next = dev_list; dev_list = link; client_reg.dev_info = &dev_info; client_reg.Version = 0x0210; client_reg.event_callback_args.client_data = link; ret = pcmcia_register_client(&link->handle, &client_reg); if (ret != CS_SUCCESS) { cs_error(link->handle, RegisterClient, ret); teles_detach(link->handle); return NULL; } return link; } /* teles_attach */ /*====================================================================== This deletes a driver "instance". The device is de-registered with Card Services. If it has been released, all local data structures are freed. Otherwise, the structures will be freed when the device is released. ======================================================================*/ static void teles_detach(struct pcmcia_device *p_dev) { dev_link_t *link = dev_to_instance(p_dev); dev_link_t **linkp; local_info_t *info = link->priv; DEBUG(0, "teles_detach(0x%p)\n", link); /* Locate device structure */ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) if (*linkp == link) break; if (*linkp == NULL) return; if (link->state & DEV_CONFIG) { info->busy = 1; teles_cs_release(link); } /* Unlink device structure and free it */ *linkp = link->next; kfree(info); } /* teles_detach */ /*====================================================================== teles_cs_config() is scheduled to run after a CARD_INSERTION event is received, to configure the PCMCIA socket, and to make the device available to the system. ======================================================================*/ static int get_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) { int i = pcmcia_get_tuple_data(handle, tuple); if (i != CS_SUCCESS) return i; return pcmcia_parse_tuple(handle, tuple, parse); } static int first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) { int i = pcmcia_get_first_tuple(handle, tuple); if (i != CS_SUCCESS) return i; return get_tuple(handle, tuple, parse); } static int next_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) { int i = pcmcia_get_next_tuple(handle, tuple); if (i != CS_SUCCESS) return i; return get_tuple(handle, tuple, parse); } static void teles_cs_config(dev_link_t *link) { client_handle_t handle; tuple_t tuple; cisparse_t parse; local_info_t *dev; int i, j, last_fn; u_short buf[128]; cistpl_cftable_entry_t *cf = &parse.cftable_entry; IsdnCard_t icard; DEBUG(0, "teles_config(0x%p)\n", link); handle = link->handle; dev = link->priv; /* This reads the card's CONFIG tuple to find its configuration registers. */ tuple.DesiredTuple = CISTPL_CONFIG; tuple.TupleData = (cisdata_t *)buf; tuple.TupleDataMax = 255; tuple.TupleOffset = 0; tuple.Attributes = 0; i = first_tuple(handle, &tuple, &parse); if (i != CS_SUCCESS) { last_fn = ParseTuple; goto cs_failed; } link->conf.ConfigBase = parse.config.base; link->conf.Present = parse.config.rmask[0]; /* Configure card */ link->state |= DEV_CONFIG; tuple.TupleData = (cisdata_t *)buf; tuple.TupleOffset = 0; tuple.TupleDataMax = 255; tuple.Attributes = 0; tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; i = first_tuple(handle, &tuple, &parse); while (i == CS_SUCCESS) { if ( (cf->io.nwin > 0) && cf->io.win[0].base) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); link->conf.ConfigIndex = cf->index; link->io.BasePort1 = cf->io.win[0].base; i = pcmcia_request_io(link->handle, &link->io); if (i == CS_SUCCESS) break; } else { printk(KERN_INFO "(teles_cs: looks like the 97 model)\n"); link->conf.ConfigIndex = cf->index; for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) { link->io.BasePort1 = j; i = pcmcia_request_io(link->handle, &link->io); if (i == CS_SUCCESS) break; } break; } i = next_tuple(handle, &tuple, &parse); } if (i != CS_SUCCESS) { last_fn = RequestIO; goto cs_failed; } i = pcmcia_request_irq(link->handle, &link->irq); if (i != CS_SUCCESS) { link->irq.AssignedIRQ = 0; last_fn = RequestIRQ; goto cs_failed; } i = pcmcia_request_configuration(link->handle, &link->conf); if (i != CS_SUCCESS) { last_fn = RequestConfiguration; goto cs_failed; } /* At this point, the dev_node_t structure(s) should be initialized and arranged in a linked list at link->dev. *//* */ sprintf(dev->node.dev_name, "teles"); dev->node.major = dev->node.minor = 0x0; link->dev = &dev->node; /* Finally, report what we've done */ printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", dev->node.dev_name, link->conf.ConfigIndex, link->conf.Vcc/10, link->conf.Vcc%10); if (link->conf.Vpp1) printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq.AssignedIRQ); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); if (link->io.NumPorts2) printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1); printk("\n"); link->state &= ~DEV_CONFIG_PENDING; icard.para[0] = link->irq.AssignedIRQ; icard.para[1] = link->io.BasePort1; icard.protocol = protocol; icard.typ = ISDN_CTYPE_TELESPCMCIA; i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard); if (i < 0) { printk(KERN_ERR "teles_cs: failed to initialize Teles PCMCIA %d at i/o %#x\n", i, link->io.BasePort1); teles_cs_release(link); } else ((local_info_t*)link->priv)->cardnr = i; return; cs_failed: cs_error(link->handle, last_fn, i); teles_cs_release(link); } /* teles_cs_config */ /*====================================================================== After a card is removed, teles_cs_release() will unregister the net device, and release the PCMCIA configuration. If the device is still open, this will be postponed until it is closed. ======================================================================*/ static void teles_cs_release(dev_link_t *link) { local_info_t *local = link->priv; DEBUG(0, "teles_cs_release(0x%p)\n", link); if (local) { if (local->cardnr >= 0) { /* no unregister function with hisax */ HiSax_closecard(local->cardnr); } } /* Unlink the device chain */ link->dev = NULL; /* Don't bother checking to see if these succeed or not */ if (link->win) pcmcia_release_window(link->win); pcmcia_release_configuration(link->handle); pcmcia_release_io(link->handle, &link->io); pcmcia_release_irq(link->handle, &link->irq); link->state &= ~DEV_CONFIG; } /* teles_cs_release */ static int teles_suspend(struct pcmcia_device *p_dev) { dev_link_t *link = dev_to_instance(p_dev); local_info_t *dev = link->priv; link->state |= DEV_SUSPEND; dev->busy = 1; if (link->state & DEV_CONFIG) pcmcia_release_configuration(link->handle); return 0; } static int teles_resume(struct pcmcia_device *p_dev) { dev_link_t *link = dev_to_instance(p_dev); local_info_t *dev = link->priv; link->state &= ~DEV_SUSPEND; if (link->state & DEV_CONFIG) pcmcia_request_configuration(link->handle, &link->conf); dev->busy = 0; return 0; } /*====================================================================== The card status event handler. Mostly, this schedules other stuff to run after an event is received. A CARD_REMOVAL event also sets some flags to discourage the net drivers from trying to talk to the card any more. When a CARD_REMOVAL event is received, we immediately set a flag to block future accesses to this device. All the functions that actually access the device should check this flag to make sure the card is still present. ======================================================================*/ static int teles_cs_event(event_t event, int priority, event_callback_args_t *args) { dev_link_t *link = args->client_data; DEBUG(1, "teles_cs_event(%d)\n", event); switch (event) { case CS_EVENT_CARD_INSERTION: link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; teles_cs_config(link); break; } return 0; } /* teles_cs_event */ static struct pcmcia_device_id teles_ids[] = { PCMCIA_DEVICE_PROD_ID12("TELES", "S0/PC", 0x67b50eae, 0xe9e70119), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, teles_ids); static struct pcmcia_driver teles_cs_driver = { .owner = THIS_MODULE, .drv = { .name = "teles_cs", }, .attach = teles_attach, .event = teles_cs_event, .remove = teles_detach, .id_table = teles_ids, .suspend = teles_suspend, .resume = teles_resume, }; static int __init init_teles_cs(void) { return pcmcia_register_driver(&teles_cs_driver); } static void __exit exit_teles_cs(void) { pcmcia_unregister_driver(&teles_cs_driver); BUG_ON(dev_list != NULL); } module_init(init_teles_cs); module_exit(exit_teles_cs);