/***************************************************************************** * * * File: mv88x201x.c * * $Revision: 1.12 $ * * $Date: 2005/04/15 19:27:14 $ * * Description: * * Marvell PHY (mv88x201x) functionality. * * part of the Chelsio 10Gb Ethernet Driver. * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License, version 2, as * * published by the Free Software Foundation. * * * * You should have received a copy of the GNU General Public License along * * with this program; if not, write to the Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * * * * http://www.chelsio.com * * * * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * * All rights reserved. * * * * Maintainers: maintainers@chelsio.com * * * * Authors: Dimitrios Michailidis <dm@chelsio.com> * * Tina Yang <tainay@chelsio.com> * * Felix Marti <felix@chelsio.com> * * Scott Bardone <sbardone@chelsio.com> * * Kurt Ottaway <kottaway@chelsio.com> * * Frank DiMambro <frank@chelsio.com> * * * * History: * * * ****************************************************************************/ #include "cphy.h" #include "elmer0.h" /* * The 88x2010 Rev C. requires some link status registers * to be read * twice in order to get the right values. Future * revisions will fix * this problem and then this macro * can disappear. */ #define MV88x2010_LINK_STATUS_BUGS 1 static int led_init(struct cphy *cphy) { /* Setup the LED registers so we can turn on/off. * Writing these bits maps control to another * register. mmd(0x1) addr(0x7) */ mdio_write(cphy, 0x3, 0x8304, 0xdddd); return 0; } static int led_link(struct cphy *cphy, u32 do_enable) { u32 led = 0; #define LINK_ENABLE_BIT 0x1 mdio_read(cphy, 0x1, 0x7, &led); if (do_enable & LINK_ENABLE_BIT) { led |= LINK_ENABLE_BIT; mdio_write(cphy, 0x1, 0x7, led); } else { led &= ~LINK_ENABLE_BIT; mdio_write(cphy, 0x1, 0x7, led); } return 0; } /* Port Reset */ static int mv88x201x_reset(struct cphy *cphy, int wait) { /* This can be done through registers. It is not required since * a full chip reset is used. */ return 0; } static int mv88x201x_interrupt_enable(struct cphy *cphy) { /* Enable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x1); /* Enable Marvell interrupts through Elmer0. */ if (t1_is_asic(cphy->adapter)) { u32 elmer; t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); elmer |= ELMER0_GP_BIT6; t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); } return 0; } static int mv88x201x_interrupt_disable(struct cphy *cphy) { /* Disable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x0); /* Disable Marvell interrupts through Elmer0. */ if (t1_is_asic(cphy->adapter)) { u32 elmer; t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); elmer &= ~ELMER0_GP_BIT6; t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); } return 0; } static int mv88x201x_interrupt_clear(struct cphy *cphy) { u32 elmer; u32 val; #ifdef MV88x2010_LINK_STATUS_BUGS /* Required to read twice before clear takes affect. */ mdio_read(cphy, 0x1, 0x9003, &val); mdio_read(cphy, 0x1, 0x9004, &val); mdio_read(cphy, 0x1, 0x9005, &val); /* Read this register after the others above it else * the register doesn't clear correctly. */ mdio_read(cphy, 0x1, 0x1, &val); #endif /* Clear link status. */ mdio_read(cphy, 0x1, 0x1, &val); /* Clear PHY LASI interrupts. */ mdio_read(cphy, 0x1, 0x9005, &val); #ifdef MV88x2010_LINK_STATUS_BUGS /* Do it again. */ mdio_read(cphy, 0x1, 0x9003, &val); mdio_read(cphy, 0x1, 0x9004, &val); #endif /* Clear Marvell interrupts through Elmer0. */ if (t1_is_asic(cphy->adapter)) { t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); elmer |= ELMER0_GP_BIT6; t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); } return 0; } static int mv88x201x_interrupt_handler(struct cphy *cphy) { /* Clear interrupts */ mv88x201x_interrupt_clear(cphy); /* We have only enabled link change interrupts and so * cphy_cause must be a link change interrupt. */ return cphy_cause_link_change; } static int mv88x201x_set_loopback(struct cphy *cphy, int on) { return 0; } static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok, int *speed, int *duplex, int *fc) { u32 val = 0; #define LINK_STATUS_BIT 0x4 if (link_ok) { /* Read link status. */ mdio_read(cphy, 0x1, 0x1, &val); val &= LINK_STATUS_BIT; *link_ok = (val == LINK_STATUS_BIT); /* Turn on/off Link LED */ led_link(cphy, *link_ok); } if (speed) *speed = SPEED_10000; if (duplex) *duplex = DUPLEX_FULL; if (fc) *fc = PAUSE_RX | PAUSE_TX; return 0; } static void mv88x201x_destroy(struct cphy *cphy) { kfree(cphy); } static struct cphy_ops mv88x201x_ops = { .destroy = mv88x201x_destroy, .reset = mv88x201x_reset, .interrupt_enable = mv88x201x_interrupt_enable, .interrupt_disable = mv88x201x_interrupt_disable, .interrupt_clear = mv88x201x_interrupt_clear, .interrupt_handler = mv88x201x_interrupt_handler, .get_link_status = mv88x201x_get_link_status, .set_loopback = mv88x201x_set_loopback, }; static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr, const struct mdio_ops *mdio_ops) { u32 val; struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL); if (!cphy) return NULL; cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops); /* Commands the PHY to enable XFP's clock. */ mdio_read(cphy, 0x3, 0x8300, &val); mdio_write(cphy, 0x3, 0x8300, val | 1); /* Clear link status. Required because of a bug in the PHY. */ mdio_read(cphy, 0x1, 0x8, &val); mdio_read(cphy, 0x3, 0x8, &val); /* Allows for Link,Ack LED turn on/off */ led_init(cphy); return cphy; } /* Chip Reset */ static int mv88x201x_phy_reset(adapter_t *adapter) { u32 val; t1_tpi_read(adapter, A_ELMER0_GPO, &val); val &= ~4; t1_tpi_write(adapter, A_ELMER0_GPO, val); msleep(100); t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); msleep(1000); /* Now lets enable the Laser. Delay 100us */ t1_tpi_read(adapter, A_ELMER0_GPO, &val); val |= 0x8000; t1_tpi_write(adapter, A_ELMER0_GPO, val); udelay(100); return 0; } const struct gphy t1_mv88x201x_ops = { .create = mv88x201x_phy_create, .reset = mv88x201x_phy_reset };