/********************************************************************* * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $ * * Description: Definitions for the SMC IrCC chipset * Status: Experimental. * Author: Daniele Peri (peri@csai.unipa.it) * * Copyright (c) 2002 Daniele Peri * All Rights Reserved. * * Based on smc-ircc.h: * * Copyright (c) 1999-2000, Dag Brattli * Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net> * All Rights Reserved * * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * ********************************************************************/ #ifndef SMSC_IRCC2_H #define SMSC_IRCC2_H /* DMA modes needed */ #define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */ #define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */ /* Master Control Register */ #define IRCC_MASTER 0x07 #define IRCC_MASTER_POWERDOWN 0x80 #define IRCC_MASTER_RESET 0x40 #define IRCC_MASTER_INT_EN 0x20 #define IRCC_MASTER_ERROR_RESET 0x10 /* Register block 0 */ /* Interrupt Identification */ #define IRCC_IIR 0x01 #define IRCC_IIR_ACTIVE_FRAME 0x80 #define IRCC_IIR_EOM 0x40 #define IRCC_IIR_RAW_MODE 0x20 #define IRCC_IIR_FIFO 0x10 /* Interrupt Enable */ #define IRCC_IER 0x02 #define IRCC_IER_ACTIVE_FRAME 0x80 #define IRCC_IER_EOM 0x40 #define IRCC_IER_RAW_MODE 0x20 #define IRCC_IER_FIFO 0x10 /* Line Status Register */ #define IRCC_LSR 0x03 #define IRCC_LSR_UNDERRUN 0x80 #define IRCC_LSR_OVERRUN 0x40 #define IRCC_LSR_FRAME_ERROR 0x20 #define IRCC_LSR_SIZE_ERROR 0x10 #define IRCC_LSR_CRC_ERROR 0x80 #define IRCC_LSR_FRAME_ABORT 0x40 /* Line Status Address Register */ #define IRCC_LSAR 0x03 #define IRCC_LSAR_ADDRESS_MASK 0x07 /* Line Control Register A */ #define IRCC_LCR_A 0x04 #define IRCC_LCR_A_FIFO_RESET 0x80 #define IRCC_LCR_A_FAST 0x40 #define IRCC_LCR_A_GP_DATA 0x20 #define IRCC_LCR_A_RAW_TX 0x10 #define IRCC_LCR_A_RAW_RX 0x08 #define IRCC_LCR_A_ABORT 0x04 #define IRCC_LCR_A_DATA_DONE 0x02 /* Line Control Register B */ #define IRCC_LCR_B 0x05 #define IRCC_LCR_B_SCE_DISABLED 0x00 #define IRCC_LCR_B_SCE_TRANSMIT 0x40 #define IRCC_LCR_B_SCE_RECEIVE 0x80 #define IRCC_LCR_B_SCE_UNDEFINED 0xc0 #define IRCC_LCR_B_SIP_ENABLE 0x20 #define IRCC_LCR_B_BRICK_WALL 0x10 /* Bus Status Register */ #define IRCC_BSR 0x06 #define IRCC_BSR_NOT_EMPTY 0x80 #define IRCC_BSR_FIFO_FULL 0x40 #define IRCC_BSR_TIMEOUT 0x20 /* Register block 1 */ #define IRCC_FIFO_THRESHOLD 0x02 #define IRCC_SCE_CFGA 0x00 #define IRCC_CFGA_AUX_IR 0x80 #define IRCC_CFGA_HALF_DUPLEX 0x04 #define IRCC_CFGA_TX_POLARITY 0x02 #define IRCC_CFGA_RX_POLARITY 0x01 #define IRCC_CFGA_COM 0x00 #define IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK 0x87 #define IRCC_CFGA_IRDA_SIR_A 0x08 #define IRCC_CFGA_ASK_SIR 0x10 #define IRCC_CFGA_IRDA_SIR_B 0x18 #define IRCC_CFGA_IRDA_HDLC 0x20 #define IRCC_CFGA_IRDA_4PPM 0x28 #define IRCC_CFGA_CONSUMER 0x30 #define IRCC_CFGA_RAW_IR 0x38 #define IRCC_CFGA_OTHER 0x40 #define IRCC_IR_HDLC 0x04 #define IRCC_IR_4PPM 0x01 #define IRCC_IR_CONSUMER 0x02 #define IRCC_SCE_CFGB 0x01 #define IRCC_CFGB_LOOPBACK 0x20 #define IRCC_CFGB_LPBCK_TX_CRC 0x10 #define IRCC_CFGB_NOWAIT 0x08 #define IRCC_CFGB_STRING_MOVE 0x04 #define IRCC_CFGB_DMA_BURST 0x02 #define IRCC_CFGB_DMA_ENABLE 0x01 #define IRCC_CFGB_MUX_COM 0x00 #define IRCC_CFGB_MUX_IR 0x40 #define IRCC_CFGB_MUX_AUX 0x80 #define IRCC_CFGB_MUX_INACTIVE 0xc0 /* Register block 3 - Identification Registers! */ #define IRCC_ID_HIGH 0x00 /* 0x10 */ #define IRCC_ID_LOW 0x01 /* 0xB8 */ #define IRCC_CHIP_ID 0x02 /* 0xF1 */ #define IRCC_VERSION 0x03 /* 0x01 */ #define IRCC_INTERFACE 0x04 /* low 4 = DMA, high 4 = IRQ */ #define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */ #define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */ /* Register block 4 - IrDA */ #define IRCC_CONTROL 0x00 #define IRCC_BOF_COUNT_LO 0x01 /* Low byte */ #define IRCC_BOF_COUNT_HI 0x00 /* High nibble (bit 0-3) */ #define IRCC_BRICKWALL_CNT_LO 0x02 /* Low byte */ #define IRCC_BRICKWALL_CNT_HI 0x03 /* High nibble (bit 4-7) */ #define IRCC_TX_SIZE_LO 0x04 /* Low byte */ #define IRCC_TX_SIZE_HI 0x03 /* High nibble (bit 0-3) */ #define IRCC_RX_SIZE_HI 0x05 /* High nibble (bit 0-3) */ #define IRCC_RX_SIZE_LO 0x06 /* Low byte */ #define IRCC_1152 0x80 #define IRCC_CRC 0x40 /* Register block 5 - IrDA */ #define IRCC_ATC 0x00 #define IRCC_ATC_nPROGREADY 0x80 #define IRCC_ATC_SPEED 0x40 #define IRCC_ATC_ENABLE 0x20 #define IRCC_ATC_MASK 0xE0 #define IRCC_IRHALFDUPLEX_TIMEOUT 0x01 #define IRCC_SCE_TX_DELAY_TIMER 0x02 /* * Other definitions */ #define SMSC_IRCC2_MAX_SIR_SPEED 115200 #define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8 #define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8 #define SMSC_IRCC2_FIFO_SIZE 16 #define SMSC_IRCC2_FIFO_THRESHOLD 64 /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ #define SMSC_IRCC2_RX_BUFF_TRUESIZE 14384 #define SMSC_IRCC2_TX_BUFF_TRUESIZE 14384 #define SMSC_IRCC2_MIN_TURN_TIME 0x07 #define SMSC_IRCC2_WINDOW_SIZE 0x07 /* Maximum wait for hw transmitter to finish */ #define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US 1000 /* 1 ms */ /* Maximum wait for ATC transceiver programming to finish */ #define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1 #endif /* SMSC_IRCC2_H */