/* * drivers/net/phy/phy_device.c * * Framework for finding and configuring PHYs. * Also contains generic PHY driver * * Author: Andy Fleming * * Copyright (c) 2004 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include MODULE_DESCRIPTION("PHY library"); MODULE_AUTHOR("Andy Fleming"); MODULE_LICENSE("GPL"); static struct phy_driver genphy_driver; extern int mdio_bus_init(void); extern void mdio_bus_exit(void); struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) { struct phy_device *dev; /* We allocate the device, and initialize the * default values */ dev = kcalloc(1, sizeof(*dev), GFP_KERNEL); if (NULL == dev) return (struct phy_device*) PTR_ERR((void*)-ENOMEM); dev->speed = 0; dev->duplex = -1; dev->pause = dev->asym_pause = 0; dev->link = 1; dev->autoneg = AUTONEG_ENABLE; dev->addr = addr; dev->phy_id = phy_id; dev->bus = bus; dev->state = PHY_DOWN; spin_lock_init(&dev->lock); return dev; } EXPORT_SYMBOL(phy_device_create); /* get_phy_device * * description: Reads the ID registers of the PHY at addr on the * bus, then allocates and returns the phy_device to * represent it. */ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) { int phy_reg; u32 phy_id; struct phy_device *dev = NULL; /* Grab the bits from PHYIR1, and put them * in the upper half */ phy_reg = bus->read(bus, addr, MII_PHYSID1); if (phy_reg < 0) return ERR_PTR(phy_reg); phy_id = (phy_reg & 0xffff) << 16; /* Grab the bits from PHYIR2, and put them in the lower half */ phy_reg = bus->read(bus, addr, MII_PHYSID2); if (phy_reg < 0) return ERR_PTR(phy_reg); phy_id |= (phy_reg & 0xffff); /* If the phy_id is all Fs, there is no device there */ if (0xffffffff == phy_id) return NULL; dev = phy_device_create(bus, addr, phy_id); return dev; } /* phy_prepare_link: * * description: Tells the PHY infrastructure to handle the * gory details on monitoring link status (whether through * polling or an interrupt), and to call back to the * connected device driver when the link status changes. * If you want to monitor your own link state, don't call * this function */ void phy_prepare_link(struct phy_device *phydev, void (*handler)(struct net_device *)) { phydev->adjust_link = handler; } /* phy_connect: * * description: Convenience function for connecting ethernet * devices to PHY devices. The default behavior is for * the PHY infrastructure to handle everything, and only notify * the connected driver when the link status changes. If you * don't want, or can't use the provided functionality, you may * choose to call only the subset of functions which provide * the desired functionality. */ struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, void (*handler)(struct net_device *), u32 flags) { struct phy_device *phydev; phydev = phy_attach(dev, phy_id, flags); if (IS_ERR(phydev)) return phydev; phy_prepare_link(phydev, handler); phy_start_machine(phydev, NULL); if (phydev->irq > 0) phy_start_interrupts(phydev); return phydev; } EXPORT_SYMBOL(phy_connect); void phy_disconnect(struct phy_device *phydev) { if (phydev->irq > 0) phy_stop_interrupts(phydev); phy_stop_machine(phydev); phydev->adjust_link = NULL; phy_detach(phydev); } EXPORT_SYMBOL(phy_disconnect); /* phy_attach: * * description: Called by drivers to attach to a particular PHY * device. The phy_device is found, and properly hooked up * to the phy_driver. If no driver is attached, then the * genphy_driver is used. The phy_device is given a ptr to * the attaching device, and given a callback for link status * change. The phy_device is returned to the attaching * driver. */ static int phy_compare_id(struct device *dev, void *data) { return strcmp((char *)data, dev->bus_id) ? 0 : 1; } struct phy_device *phy_attach(struct net_device *dev, const char *phy_id, u32 flags) { struct bus_type *bus = &mdio_bus_type; struct phy_device *phydev; struct device *d; /* Search the list of PHY devices on the mdio bus for the * PHY with the requested name */ d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id); if (d) { phydev = to_phy_device(d); } else { printk(KERN_ERR "%s not found\n", phy_id); return ERR_PTR(-ENODEV); } /* Assume that if there is no driver, that it doesn't * exist, and we should use the genphy driver. */ if (NULL == d->driver) { int err; down_write(&d->bus->subsys.rwsem); d->driver = &genphy_driver.driver; err = d->driver->probe(d); if (err >= 0) err = device_bind_driver(d); up_write(&d->bus->subsys.rwsem); if (err) return ERR_PTR(err); } if (phydev->attached_dev) { printk(KERN_ERR "%s: %s already attached\n", dev->name, phy_id); return ERR_PTR(-EBUSY); } phydev->attached_dev = dev; phydev->dev_flags = flags; return phydev; } EXPORT_SYMBOL(phy_attach); void phy_detach(struct phy_device *phydev) { phydev->attached_dev = NULL; /* If the device had no specific driver before (i.e. - it * was using the generic driver), we unbind the device * from the generic driver so that there's a chance a * real driver could be loaded */ if (phydev->dev.driver == &genphy_driver.driver) { down_write(&phydev->dev.bus->subsys.rwsem); device_release_driver(&phydev->dev); up_write(&phydev->dev.bus->subsys.rwsem); } } EXPORT_SYMBOL(phy_detach); /* Generic PHY support and helper functions */ /* genphy_config_advert * * description: Writes MII_ADVERTISE with the appropriate values, * after sanitizing the values to make sure we only advertise * what is supported */ int genphy_config_advert(struct phy_device *phydev) { u32 advertise; int adv; int err; /* Only allow advertising what * this PHY supports */ phydev->advertising &= phydev->supported; advertise = phydev->advertising; /* Setup standard advertisement */ adv = phy_read(phydev, MII_ADVERTISE); if (adv < 0) return adv; adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); if (advertise & ADVERTISED_10baseT_Half) adv |= ADVERTISE_10HALF; if (advertise & ADVERTISED_10baseT_Full) adv |= ADVERTISE_10FULL; if (advertise & ADVERTISED_100baseT_Half) adv |= ADVERTISE_100HALF; if (advertise & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; if (advertise & ADVERTISED_Pause) adv |= ADVERTISE_PAUSE_CAP; if (advertise & ADVERTISED_Asym_Pause) adv |= ADVERTISE_PAUSE_ASYM; err = phy_write(phydev, MII_ADVERTISE, adv); if (err < 0) return err; /* Configure gigabit if it's supported */ if (phydev->supported & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) { adv = phy_read(phydev, MII_CTRL1000); if (adv < 0) return adv; adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); if (advertise & SUPPORTED_1000baseT_Half) adv |= ADVERTISE_1000HALF; if (advertise & SUPPORTED_1000baseT_Full) adv |= ADVERTISE_1000FULL; err = phy_write(phydev, MII_CTRL1000, adv); if (err < 0) return err; } return adv; } EXPORT_SYMBOL(genphy_config_advert); /* genphy_setup_forced * * description: Configures MII_BMCR to force speed/duplex * to the values in phydev. Assumes that the values are valid. * Please see phy_sanitize_settings() */ int genphy_setup_forced(struct phy_device *phydev) { int ctl = BMCR_RESET; phydev->pause = phydev->asym_pause = 0; if (SPEED_1000 == phydev->speed) ctl |= BMCR_SPEED1000; else if (SPEED_100 == phydev->speed) ctl |= BMCR_SPEED100; if (DUPLEX_FULL == phydev->duplex) ctl |= BMCR_FULLDPLX; ctl = phy_write(phydev, MII_BMCR, ctl); if (ctl < 0) return ctl; /* We just reset the device, so we'd better configure any * settings the PHY requires to operate */ if (phydev->drv->config_init) ctl = phydev->drv->config_init(phydev); return ctl; } /* Enable and Restart Autonegotiation */ int genphy_restart_aneg(struct phy_device *phydev) { int ctl; ctl = phy_read(phydev, MII_BMCR); if (ctl < 0) return ctl; ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); /* Don't isolate the PHY if we're negotiating */ ctl &= ~(BMCR_ISOLATE); ctl = phy_write(phydev, MII_BMCR, ctl); return ctl; } /* genphy_config_aneg * * description: If auto-negotiation is enabled, we configure the * advertising, and then restart auto-negotiation. If it is not * enabled, then we write the BMCR */ int genphy_config_aneg(struct phy_device *phydev) { int err = 0; if (AUTONEG_ENABLE == phydev->autoneg) { err = genphy_config_advert(phydev); if (err < 0) return err; err = genphy_restart_aneg(phydev); } else err = genphy_setup_forced(phydev); return err; } EXPORT_SYMBOL(genphy_config_aneg); /* genphy_update_link * * description: Update the value in phydev->link to reflect the * current link value. In order to do this, we need to read * the status register twice, keeping the second value */ int genphy_update_link(struct phy_device *phydev) { int status; /* Do a fake read */ status = phy_read(phydev, MII_BMSR); if (status < 0) return status; /* Read link and autonegotiation status */ status = phy_read(phydev, MII_BMSR); if (status < 0) return status; if ((status & BMSR_LSTATUS) == 0) phydev->link = 0; else phydev->link = 1; return 0; } EXPORT_SYMBOL(genphy_update_link); /* genphy_read_status * * description: Check the link, then figure out the current state * by comparing what we advertise with what the link partner * advertises. Start by checking the gigabit possibilities, * then move on to 10/100. */ int genphy_read_status(struct phy_device *phydev) { int adv; int err; int lpa; int lpagb = 0; /* Update the link, but return if there * was an error */ err = genphy_update_link(phydev); if (err) return err; if (AUTONEG_ENABLE == phydev->autoneg) { if (phydev->supported & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) { lpagb = phy_read(phydev, MII_STAT1000); if (lpagb < 0) return lpagb; adv = phy_read(phydev, MII_CTRL1000); if (adv < 0) return adv; lpagb &= adv << 2; } lpa = phy_read(phydev, MII_LPA); if (lpa < 0) return lpa; adv = phy_read(phydev, MII_ADVERTISE); if (adv < 0) return adv; lpa &= adv; phydev->speed = SPEED_10; phydev->duplex = DUPLEX_HALF; phydev->pause = phydev->asym_pause = 0; if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { phydev->speed = SPEED_1000; if (lpagb & LPA_1000FULL) phydev->duplex = DUPLEX_FULL; } else if (lpa & (LPA_100FULL | LPA_100HALF)) { phydev->speed = SPEED_100; if (lpa & LPA_100FULL) phydev->duplex = DUPLEX_FULL; } else if (lpa & LPA_10FULL) phydev->duplex = DUPLEX_FULL; if (phydev->duplex == DUPLEX_FULL){ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; } } else { int bmcr = phy_read(phydev, MII_BMCR); if (bmcr < 0) return bmcr; if (bmcr & BMCR_FULLDPLX) phydev->duplex = DUPLEX_FULL; else phydev->duplex = DUPLEX_HALF; if (bmcr & BMCR_SPEED1000) phydev->speed = SPEED_1000; else if (bmcr & BMCR_SPEED100) phydev->speed = SPEED_100; else phydev->speed = SPEED_10; phydev->pause = phydev->asym_pause = 0; } return 0; } EXPORT_SYMBOL(genphy_read_status); static int genphy_config_init(struct phy_device *phydev) { int val; u32 features; /* For now, I'll claim that the generic driver supports * all possible port types */ features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | SUPPORTED_FIBRE | SUPPORTED_BNC); /* Do we support autonegotiation? */ val = phy_read(phydev, MII_BMSR); if (val < 0) return val; if (val & BMSR_ANEGCAPABLE) features |= SUPPORTED_Autoneg; if (val & BMSR_100FULL) features |= SUPPORTED_100baseT_Full; if (val & BMSR_100HALF) features |= SUPPORTED_100baseT_Half; if (val & BMSR_10FULL) features |= SUPPORTED_10baseT_Full; if (val & BMSR_10HALF) features |= SUPPORTED_10baseT_Half; if (val & BMSR_ESTATEN) { val = phy_read(phydev, MII_ESTATUS); if (val < 0) return val; if (val & ESTATUS_1000_TFULL) features |= SUPPORTED_1000baseT_Full; if (val & ESTATUS_1000_THALF) features |= SUPPORTED_1000baseT_Half; } phydev->supported = features; phydev->advertising = features; return 0; } /* phy_probe * * description: Take care of setting up the phy_device structure, * set the state to READY (the driver's init function should * set it to STARTING if needed). */ static int phy_probe(struct device *dev) { struct phy_device *phydev; struct phy_driver *phydrv; struct device_driver *drv; int err = 0; phydev = to_phy_device(dev); /* Make sure the driver is held. * XXX -- Is this correct? */ drv = get_driver(phydev->dev.driver); phydrv = to_phy_driver(drv); phydev->drv = phydrv; /* Disable the interrupt if the PHY doesn't support it */ if (!(phydrv->flags & PHY_HAS_INTERRUPT)) phydev->irq = PHY_POLL; spin_lock(&phydev->lock); /* Start out supporting everything. Eventually, * a controller will attach, and may modify one * or both of these values */ phydev->supported = phydrv->features; phydev->advertising = phydrv->features; /* Set the state to READY by default */ phydev->state = PHY_READY; if (phydev->drv->probe) err = phydev->drv->probe(phydev); spin_unlock(&phydev->lock); if (err < 0) return err; if (phydev->drv->config_init) err = phydev->drv->config_init(phydev); return err; } static int phy_remove(struct device *dev) { struct phy_device *phydev; phydev = to_phy_device(dev); spin_lock(&phydev->lock); phydev->state = PHY_DOWN; spin_unlock(&phydev->lock); if (phydev->drv->remove) phydev->drv->remove(phydev); put_driver(dev->driver); phydev->drv = NULL; return 0; } int phy_driver_register(struct phy_driver *new_driver) { int retval; memset(&new_driver->driver, 0, sizeof(new_driver->driver)); new_driver->driver.name = new_driver->name; new_driver->driver.bus = &mdio_bus_type; new_driver->driver.probe = phy_probe; new_driver->driver.remove = phy_remove; retval = driver_register(&new_driver->driver); if (retval) { printk(KERN_ERR "%s: Error %d in registering driver\n", new_driver->name, retval); return retval; } pr_info("%s: Registered new driver\n", new_driver->name); return 0; } EXPORT_SYMBOL(phy_driver_register); void phy_driver_unregister(struct phy_driver *drv) { driver_unregister(&drv->driver); } EXPORT_SYMBOL(phy_driver_unregister); static struct phy_driver genphy_driver = { .phy_id = 0xffffffff, .phy_id_mask = 0xffffffff, .name = "Generic PHY", .config_init = genphy_config_init, .features = 0, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .driver = {.owner= THIS_MODULE, }, }; static int __init phy_init(void) { int rc; rc = mdio_bus_init(); if (rc) return rc; rc = phy_driver_register(&genphy_driver); if (rc) mdio_bus_exit(); return rc; } static void __exit phy_exit(void) { phy_driver_unregister(&genphy_driver); mdio_bus_exit(); } subsys_initcall(phy_init); module_exit(phy_exit);