/* * MosChips MCS7830 based USB 2.0 Ethernet Devices * * based on usbnet.c, asix.c and the vendor provided mcs7830 driver * * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de> * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> * Copyright (c) 2002-2003 TiVo Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/crc32.h> #include <linux/etherdevice.h> #include <linux/ethtool.h> #include <linux/init.h> #include <linux/mii.h> #include <linux/module.h> #include <linux/netdevice.h> #include <linux/usb.h> #include "usbnet.h" /* requests */ #define MCS7830_RD_BMREQ (USB_DIR_IN | USB_TYPE_VENDOR | \ USB_RECIP_DEVICE) #define MCS7830_WR_BMREQ (USB_DIR_OUT | USB_TYPE_VENDOR | \ USB_RECIP_DEVICE) #define MCS7830_RD_BREQ 0x0E #define MCS7830_WR_BREQ 0x0D #define MCS7830_CTRL_TIMEOUT 1000 #define MCS7830_MAX_MCAST 64 #define MCS7830_VENDOR_ID 0x9710 #define MCS7830_PRODUCT_ID 0x7830 #define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \ ADVERTISE_100HALF | ADVERTISE_10FULL | \ ADVERTISE_10HALF | ADVERTISE_CSMA) /* HIF_REG_XX coressponding index value */ enum { HIF_REG_MULTICAST_HASH = 0x00, HIF_REG_PACKET_GAP1 = 0x08, HIF_REG_PACKET_GAP2 = 0x09, HIF_REG_PHY_DATA = 0x0a, HIF_REG_PHY_CMD1 = 0x0c, HIF_REG_PHY_CMD1_READ = 0x40, HIF_REG_PHY_CMD1_WRITE = 0x20, HIF_REG_PHY_CMD1_PHYADDR = 0x01, HIF_REG_PHY_CMD2 = 0x0d, HIF_REG_PHY_CMD2_PEND_FLAG_BIT = 0x80, HIF_REG_PHY_CMD2_READY_FLAG_BIT = 0x40, HIF_REG_CONFIG = 0x0e, HIF_REG_CONFIG_CFG = 0x80, HIF_REG_CONFIG_SPEED100 = 0x40, HIF_REG_CONFIG_FULLDUPLEX_ENABLE = 0x20, HIF_REG_CONFIG_RXENABLE = 0x10, HIF_REG_CONFIG_TXENABLE = 0x08, HIF_REG_CONFIG_SLEEPMODE = 0x04, HIF_REG_CONFIG_ALLMULTICAST = 0x02, HIF_REG_CONFIG_PROMISCIOUS = 0x01, HIF_REG_ETHERNET_ADDR = 0x0f, HIF_REG_22 = 0x15, HIF_REG_PAUSE_THRESHOLD = 0x16, HIF_REG_PAUSE_THRESHOLD_DEFAULT = 0, }; struct mcs7830_data { u8 multi_filter[8]; u8 config; }; static const char driver_name[] = "MOSCHIP usb-ethernet driver"; static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ, MCS7830_RD_BMREQ, 0x0000, index, data, size, msecs_to_jiffies(MCS7830_CTRL_TIMEOUT)); return ret; } static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ, MCS7830_WR_BMREQ, 0x0000, index, data, size, msecs_to_jiffies(MCS7830_CTRL_TIMEOUT)); return ret; } static void mcs7830_async_cmd_callback(struct urb *urb) { struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; if (urb->status < 0) printk(KERN_DEBUG "mcs7830_async_cmd_callback() failed with %d", urb->status); kfree(req); usb_free_urb(urb); } static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_ctrlrequest *req; int ret; struct urb *urb; urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { dev_dbg(&dev->udev->dev, "Error allocating URB " "in write_cmd_async!"); return; } req = kmalloc(sizeof *req, GFP_ATOMIC); if (!req) { dev_err(&dev->udev->dev, "Failed to allocate memory for " "control request"); goto out; } req->bRequestType = MCS7830_WR_BMREQ; req->bRequest = MCS7830_WR_BREQ; req->wValue = 0; req->wIndex = cpu_to_le16(index); req->wLength = cpu_to_le16(size); usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), (void *)req, data, size, mcs7830_async_cmd_callback, req); ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret < 0) { dev_err(&dev->udev->dev, "Error submitting the control " "message: ret=%d", ret); goto out; } return; out: kfree(req); usb_free_urb(urb); } static int mcs7830_get_address(struct usbnet *dev) { int ret; ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, dev->net->dev_addr); if (ret < 0) return ret; return 0; } static int mcs7830_read_phy(struct usbnet *dev, u8 index) { int ret; int i; __le16 val; u8 cmd[2] = { HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR, HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index, }; mutex_lock(&dev->phy_mutex); /* write the MII command */ ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); if (ret < 0) goto out; /* wait for the data to become valid, should be within < 1ms */ for (i = 0; i < 10; i++) { ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT)) break; ret = -EIO; msleep(1); } if (ret < 0) goto out; /* read actual register contents */ ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val); if (ret < 0) goto out; ret = le16_to_cpu(val); dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n", index, val, i); out: mutex_unlock(&dev->phy_mutex); return ret; } static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val) { int ret; int i; __le16 le_val; u8 cmd[2] = { HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR, HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F), }; mutex_lock(&dev->phy_mutex); /* write the new register contents */ le_val = cpu_to_le16(val); ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val); if (ret < 0) goto out; /* write the MII command */ ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); if (ret < 0) goto out; /* wait for the command to be accepted by the PHY */ for (i = 0; i < 10; i++) { ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT)) break; ret = -EIO; msleep(1); } if (ret < 0) goto out; ret = 0; dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n", index, val, i); out: mutex_unlock(&dev->phy_mutex); return ret; } /* * This algorithm comes from the original mcs7830 version 1.4 driver, * not sure if it is needed. */ static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode) { int ret; /* Enable all media types */ ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE); /* First reset BMCR */ if (!ret) ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000); /* Enable Auto Neg */ if (!ret) ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE); /* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */ if (!ret) ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART ); return ret < 0 ? : 0; } /* * if we can read register 22, the chip revision is C or higher */ static int mcs7830_get_rev(struct usbnet *dev) { u8 dummy[2]; int ret; ret = mcs7830_get_reg(dev, HIF_REG_22, 2, dummy); if (ret > 0) return 2; /* Rev C or later */ return 1; /* earlier revision */ } /* * On rev. C we need to set the pause threshold */ static void mcs7830_rev_C_fixup(struct usbnet *dev) { u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT; int retry; for (retry = 0; retry < 2; retry++) { if (mcs7830_get_rev(dev) == 2) { dev_info(&dev->udev->dev, "applying rev.C fixup\n"); mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD, 1, &pause_threshold); } msleep(1); } } static int mcs7830_init_dev(struct usbnet *dev) { int ret; int retry; /* Read MAC address from EEPROM */ ret = -EINVAL; for (retry = 0; retry < 5 && ret; retry++) ret = mcs7830_get_address(dev); if (ret) { dev_warn(&dev->udev->dev, "Cannot read MAC address\n"); goto out; } /* Set up PHY */ ret = mcs7830_set_autoneg(dev, 0); if (ret) { dev_info(&dev->udev->dev, "Cannot set autoneg\n"); goto out; } mcs7830_rev_C_fixup(dev); ret = 0; out: return ret; } static int mcs7830_mdio_read(struct net_device *netdev, int phy_id, int location) { struct usbnet *dev = netdev->priv; return mcs7830_read_phy(dev, location); } static void mcs7830_mdio_write(struct net_device *netdev, int phy_id, int location, int val) { struct usbnet *dev = netdev->priv; mcs7830_write_phy(dev, location, val); } static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd) { struct usbnet *dev = netdev_priv(net); return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); } /* credits go to asix_set_multicast */ static void mcs7830_set_multicast(struct net_device *net) { struct usbnet *dev = netdev_priv(net); struct mcs7830_data *data = (struct mcs7830_data *)&dev->data; data->config = HIF_REG_CONFIG_TXENABLE; /* this should not be needed, but it doesn't work otherwise */ data->config |= HIF_REG_CONFIG_ALLMULTICAST; if (net->flags & IFF_PROMISC) { data->config |= HIF_REG_CONFIG_PROMISCIOUS; } else if (net->flags & IFF_ALLMULTI || net->mc_count > MCS7830_MAX_MCAST) { data->config |= HIF_REG_CONFIG_ALLMULTICAST; } else if (net->mc_count == 0) { /* just broadcast and directed */ } else { /* We use the 20 byte dev->data * for our 8 byte filter buffer * to avoid allocating memory that * is tricky to free later */ struct dev_mc_list *mc_list = net->mc_list; u32 crc_bits; int i; memset(data->multi_filter, 0, sizeof data->multi_filter); /* Build the multicast hash filter. */ for (i = 0; i < net->mc_count; i++) { crc_bits = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26; data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7); mc_list = mc_list->next; } mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH, sizeof data->multi_filter, data->multi_filter); } mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config); } static int mcs7830_get_regs_len(struct net_device *net) { struct usbnet *dev = netdev_priv(net); switch (mcs7830_get_rev(dev)) { case 1: return 21; case 2: return 32; } return 0; } static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo) { usbnet_get_drvinfo(net, drvinfo); drvinfo->regdump_len = mcs7830_get_regs_len(net); } static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data) { struct usbnet *dev = netdev_priv(net); regs->version = mcs7830_get_rev(dev); mcs7830_get_reg(dev, 0, regs->len, data); } static struct ethtool_ops mcs7830_ethtool_ops = { .get_drvinfo = mcs7830_get_drvinfo, .get_regs_len = mcs7830_get_regs_len, .get_regs = mcs7830_get_regs, /* common usbnet calls */ .get_link = usbnet_get_link, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .nway_reset = usbnet_nway_reset, }; static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev) { struct net_device *net = dev->net; int ret; ret = mcs7830_init_dev(dev); if (ret) goto out; net->do_ioctl = mcs7830_ioctl; net->ethtool_ops = &mcs7830_ethtool_ops; net->set_multicast_list = mcs7830_set_multicast; mcs7830_set_multicast(net); /* reserve space for the status byte on rx */ dev->rx_urb_size = ETH_FRAME_LEN + 1; dev->mii.mdio_read = mcs7830_mdio_read; dev->mii.mdio_write = mcs7830_mdio_write; dev->mii.dev = net; dev->mii.phy_id_mask = 0x3f; dev->mii.reg_num_mask = 0x1f; dev->mii.phy_id = *((u8 *) net->dev_addr + 1); ret = usbnet_get_endpoints(dev, udev); out: return ret; } /* The chip always appends a status bytes that we need to strip */ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb) { u8 status; if (skb->len == 0) { dev_err(&dev->udev->dev, "unexpected empty rx frame\n"); return 0; } skb_trim(skb, skb->len - 1); status = skb->data[skb->len]; if (status != 0x20) dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status); return skb->len > 0; } static const struct driver_info moschip_info = { .description = "MOSCHIP 7830 usb-NET adapter", .bind = mcs7830_bind, .rx_fixup = mcs7830_rx_fixup, .flags = FLAG_ETHER, .in = 1, .out = 2, }; static const struct usb_device_id products[] = { { USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID), .driver_info = (unsigned long) &moschip_info, }, {}, }; MODULE_DEVICE_TABLE(usb, products); static struct usb_driver mcs7830_driver = { .name = driver_name, .id_table = products, .probe = usbnet_probe, .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, }; static int __init mcs7830_init(void) { return usb_register(&mcs7830_driver); } module_init(mcs7830_init); static void __exit mcs7830_exit(void) { usb_deregister(&mcs7830_driver); } module_exit(mcs7830_exit); MODULE_DESCRIPTION("USB to network adapter MCS7830)"); MODULE_LICENSE("GPL");